Panasonic of North America 9TGCF-188A Notebook Computer CF-18mk3 Family User Manual Addendum

Panasonic Corporation of North America Notebook Computer CF-18mk3 Family Addendum

User Manual CF18 Supplement for X Strap

ADDENDUM Operating In Tablet Mode FCC RF Exposure Warning: In Tablet Mode, the computer can be operated in wireless transmitter mode of operation. User must use X-Strap to assure that minimum 1.5cm spacing is provided between person’s body and internal antenna(s) located on the side edges of LCD. Refer to safety instructions on page 3 of the Operating Instructions for details.
CF-18 X-Strap Installation Instructions1. Begin installation by removingscrews from corners of youToughbook 18. 2. Position the strap on thebase of the Toughbook 18.Make sure that the clipsare towards the front ofthe machine to allowquick and easy desk use.3. Place the attachment bracketsover the screw holes from step 1.Screw onto machine with screws provided in X-Strap kit.4. Now you are ready touse your CF-18 X-Strap.While using, slide handbetween strap andmachine for a comfort-able, safe grip.5. While not in use, carry themachine at your side usingthe removable shoulder strap.Please hold the CF-18 as instructed. Please do not put the palm of your hand on the bottom of the machine. Your palm slips easily, if the CF-18 turns over you could injure your hand or arm.

User Manual CF18 Supplement for X Strap

ADDENDUM Operating In Tablet Mode FCC RF Exposure Warning: In Tablet Mode, the computer can be operated in wireless transmitter mode of operation. User must use X-Strap to assure that minimum 1.5cm spacing is provided between person’s body and internal antenna(s) located on the side edges of LCD. Refer to safety instructions on page 3 of the Operating Instructions for details.
CF-18 X-Strap Installation Instructions1. Begin installation by removingscrews from corners of youToughbook 18. 2. Position the strap on thebase of the Toughbook 18.Make sure that the clipsare towards the front ofthe machine to allowquick and easy desk use.3. Place the attachment bracketsover the screw holes from step 1.Screw onto machine with screws provided in X-Strap kit.4. Now you are ready touse your CF-18 X-Strap.While using, slide handbetween strap andmachine for a comfort-able, safe grip.5. While not in use, carry themachine at your side usingthe removable shoulder strap.Please hold the CF-18 as instructed. Please do not put the palm of your hand on the bottom of the machine. Your palm slips easily, if the CF-18 turns over you could injure your hand or arm.

Navigation menu