Panasonic of North America 9TGCF-299 Panasonic Notebook PC w/ Intel WLAN & Siemens GPRS User Manual Operating Instructions

Download:
Mirror Download [FCC.gov]
Document ID	441495
Application ID	NenpWoTaRmDsJtzVzk4unA==
Document Description	Users Manual for WLAN
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	73.65kB (920589 bits)
Date Submitted	2004-06-17 00:00:00
Date Available	2004-06-16 00:00:00
Creation Date	2004-06-17 11:30:44
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-06-17 11:31:06
Document Title	Operating Instructions
Document Creator	PageMaker 6.0J
Document Author:	Matsushita Electric Industrial Co., Ltd.

Supplementary Instructions
for Wireless LAN
This manual contains supplementary instructions regarding the use of the computer. It explains the cases where the operation of the
computer differs from that in the Operating Instructions.
Your computer is equipped with Wireless LAN enabling you to communicate using radio frequencies.
For U.S.A.
Replace the “Federal Communications Commission Radio Frequency Interference Statement” (
Operating Instructions “Read
Me First”) with the following.
Federal Communications Commission Radio
FCC RF Exposure Warning:
Frequency Interference Statement
• This computer is provided with PC Card slots that could be
used with wireless transmitter(s), which will be specifically
Note: This equipment has been tested and found to comply with the
recommended, when they become available. Other third-party
limits for a Class B digital device, pursuant to Part 15 of the FCC
wireless transmitter(s) have not been RF exposure evaluated
Rules. These limits are designed to provide reasonable protection
for use with this computer and may not comply with FCC RF
against harmful interference in a residential installation. This
exposure requirements.
equipment generates, uses and can radiate radio frequency energy
•
This equipment complies with FCC radiation exposure limits
and, if not installed and used in accordance with the instructions,
set forth for an uncontrolled environment.
may cause harmful interference to radio communications. However,
•
This equipment must be installed and operated in accordance
there is no guarantee that interference will not occur in a particular
with provided instructions and minimum 1.5 cm spacing must
installation. If this equipment does cause harmful interference to
be provided between antenna and all person’s body (excludradio or television reception, which can be determined by turning
ing extremities of hands, wrist and feet) during wireless modes
the equipment off and on, the user is encouraged to try to correct the
of operation.
interference by one or more of the following measures:
• This equipment may use multiple installed transmitters, which
Reorient or relocate the receiving antenna.
may be capable of simultaneous transmission.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
This device complies with Part 15 of the FCC Rules. Operation
from that to which the receiver is connected.
is subject to the following two conditions:
Consult the Panasonic Service Center or an experienced ra(1) This device may not cause harmful interference, and
dio/TV technician for help.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning
To assure continued compliance, use only shielded interface
Responsible Party: Matsushita Electric Corporation of America
cables when connecting to a computer or peripheral. Also, any
One Panasonic Way
changes or modifications not expressly approved by the party
Secaucus, NJ 07094
responsible for compliance could void the user’s authority to
Tel No:1-800-LAPTOP-5 (1-800-527-8675)
operate this equipment.
Information to the User
This product and your Health
This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product
however is far much less than the electromagnetic energy emitted
by wireless devices like for example mobile phones.
Because this product operates within the guidelines found in radio
frequency safety standards and recommendations, we believe this
product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and
result from deliberations of panels and committees of scientists who
continually review and interpret the extensive research literature.
In some situations or environments, the use of this product may be
restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:
Using this product on board of airplanes, or
In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless
devices in a specific organization or environment (e.g. airports),
you are encouraged to ask for authorization to use this product
prior to turning on the product.
Regulatory Information
We are not responsible for any radio or television interference caused
by unauthorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations
that may arise from failing to comply with these guidelines.
Specifications
Wireless LAN module
Data transfer rates
Standards supported
Transmission method
Wireless channels used
RF frequency band
IEEE802.11g : 54 Mbps/48 Mbps/36 Mbps/24 Mbps/18 Mbps/12 Mbps/9 Mbps/6 Mbps
(automatically switched)
IEEE802.11b : 11 Mbps/5.5 Mbps/2 Mbps/1 Mbps (automatically switched)
IEEE802.11g/IEEE802.11b
OFDM system, DSSS system
Channels 1 to 11
2.412 GHz ~ 2.462 GHz
Wireless LAN
If you use a wireless LAN, you can use a network without cable connections.
CAUTION
z Communication is performed through the wireless LAN antenna. Do not block the
antenna area with your hand or otherwise interfere with the passage of the radio
signals.
NOTE
z The communication speeds and distances differ depending on the devices that
support the wireless LAN, the installation environment and other ambient conditions.
z One characteristic of radio waves is that their transmission rate tends to drop as the
communication distance increases. It is recommended that the devices supporting
the wireless LAN be used in close vicinity to each other.
z The rate may drop while a microwave oven is being used.
Windows XP
z Do not use the Fast User Switching function.
Precautions
„ Do not use wireless LAN on airplanes, in hospitals, or in other
locations where wireless LAN signals may affect the operation
of devices in the vicinity.
z If you intend to use the computer in the environments described above, turn the wireless
LAN off using the following method:
Double-click
or
on the taskbar.
Select your wireless LAN adaptor and select [General].
Select [Off] for [Switch radio].
Select [OK].
The icon will turn to
Wireless LAN
„ To prevent theft of data or unauthorized access to the hard disk
via a wireless LAN.
z If you plan to use wireless LAN functions, we recommend that you do so only after
making the appropriate security settings, such as for data encryption.
„ We recommend turning the wireless LAN off when it is not used
or out of range.
z If you leave the wireless LAN on, the battery's operating time is shortened.
The Settings
To use the wireless LAN, set the profile using the following procedure.
The settings will vary for different network environments depending on the network system
being used. For more details, ask your system administrator or the person in charge of the
network.
CAUTION
z Set profiles for each user using the following procedure.
NOTE
Windows XP
z If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN
adaptor.] is displayed, select [Yes].
Windows 2000
z After setting the profile, delete the profile displayed at the time of purchase (profile
name: Default).
Double-click
on the taskbar.
Select your wireless LAN adapter and select [General].
Select [On] for [Switch radio].
Wireless LAN
Select [Networks] and select [Add].
Make necessary changes and select [Finish].
Enter the profile name and network name (SSID), and then make
other necessary changes, then select [Next].
Select [OK].
NOTE
z About WLAN Security Client
WLAN Security Client is an implementation of the client side of the IEEE 802.1X-Port
Based Network Access Control protocol.
• Since the WLAN Security Client has already started when
is displayed on the
taskbar, do not double-start it. If
is not displayed, start up the WLAN Security
Client in the following menu.
Windows XP
Select [Start] - [All Programs] - [Intel] - [WLAN Security Client Manager].
Windows 2000
Select [Start] - [Programs] - [Intel] - [WLAN Security Client Manager].
• For more information about how to use the WLAN Security Client, refer to [Help] in
the menu bar or;
Windows XP
Select [Getting Started Guide] or [User's Guide] in [Start] - [All Programs] - [Intel].
Windows 2000
Select [Getting Started Guide] or [User's Guide] in [Start] - [Programs] - [Intel].
Check the Communication Status
Select
or
on the taskbar to check the communication status.
For more information about how to use the Intel PROSet, refer to [Help] in the menu bar.
Wireless LAN
If the function fails to operate correctly
Read the operating instructions for the access point carefully and check the settings.
„ The access point fails to be displayed in [Available Networks]
z Select the profile you are using, and select [Advanced] in [Networks]. [Connect to ad hoc
networks only] may have been selected in [Connection preference]. In this case, select
[Connect to infrastructure and ad hoc networks].
z This computer uses channels 1 through 11*1. Check the channel being used.
*1
In the case of wireless communications, the frequency band being used can be divided into
segments, so that different communications can be conducted on each band segment. A "Channel"
refers to the individual frequency bandwidth divisions.
„ The access point cannot be accessed
z The network key setting may not conform to the access point.
Check the network key setting of the access point and, if necessary, set it again correctly.
z Depending on the access point and settings, access may not be accepted unless the
computer's MAC address is registered beforehand. In this case, check the computer's
MAC address using the following procedure and register it according to the operating
instructions of the access point.
1 Display [Command Prompt].
Windows XP
Select [Start] - [All Programs] - [Accessories] - [Command Prompt].
Windows 2000
Select [Start] - [Programs] - [Accessories] - [Command Prompt].
2 Input [ipconfig /all], and press Enter.
3 Make a note of the 12-digit string of alphanumerics displayed on "Physical
Address" line on Wireless LAN side. Then input [exit], and press Enter.
„ The IP address of the access point is wrong
z Following the operating instructions of the access point, set the IP address of the access
point again correctly.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:06:17 11:31:06-03:00
Create Date                     : 2004:06:17 11:30:44-03:00
Title                           : Operating Instructions
Subject                         : DFQX5414YA
Author                          : Matsushita Electric Industrial Co., Ltd.
Creator                         : PageMaker 6.0J
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 6
Mod Date                        : 2004:06:17 11:31:06-03:00
Creation Date                   : 2004:06:17 11:30:44-03:00
Metadata Date                   : 2004:06:17 11:31:06-03:00

EXIF Metadata provided by EXIF.tools