Panasonic of North America 9TGCF-29A Panasonic Notebook PC w/ Intel WLAN & Sierra CDMA User Manual Operating Instructions

Panasonic Corporation of North America Panasonic Notebook PC w/ Intel WLAN & Sierra CDMA Operating Instructions

Users Manual

OPERATING INSTRUCTIONSPersonal ComputerAppendixLIMITED USE LICENSE AGREEMENT .......... 33Hard Disk Backup Function ............................. 35Hard Disk Data Erase Utility ............................ 39Specifications................................................... 40LIMITED WARRANTY ..................................... 42TroubleshootingList of Error Codes ........................................ 25Dealing with Problems (Summary).......................26Reinstalling Software .................................... 31OperationStarting Up/Shutting Down............................ 16Touch Pad (Basic Operation) ............................. 19Reference Manual ......................................... 20Useful Information ......................................... 21Getting StartedRead Me First.................................................. 3Names and Functions of Parts ........................ 9First-time Operation ...................................... 11Contents[Additional Manual]Reference ManualThis manual can be accessed on your computer.Refer to page 20 on how to access the Reference Manual.Reference Manual•Read Me First•Key CombinationsReference Manual•Touch Pad•Touchscreen•Panasonic Hand Writing•Standby/HibernationFunctions•Security Measures•Computing on the Road•Battery Power•Multimedia Pocket•PC Cards•RAM Module•Port Replicator•External Display•Printer•USB Devices•Modem•LAN•Wireless LAN•Hard Disk Drive•Setup Utility•Icon EnlargerReference Manual•Technical Information•DMI Viewer•List of Error Codes•Dealing with Problems(Advanced)Appendix Getting StartedOperationTroubleshootingModel No. CF-29 SeriesPlease read these instructions carefully before using this product and save this manual for future use.XP•LED Indicators
2Getting StartedIntroductionThank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your newcomputer.Illustrations and Terminology in this ManualCopyrightThis manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in anyform without the prior written permission of Matsushita Electric Industrial Co., Ltd.No patent liability is assumed with respect to the use of the information contained herein.©2004 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.DisclaimerComputer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability fordamage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.TrademarksMicrosoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries.Intel, Pentium and PROSet are either registered trademarks or trademarks of Intel Corporation.Adobe® and Acrobat® are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies.* For the Model No., insert the 12 digit number (for example, CF-29ETKGZKM) located onthe bottom of the computer.NOTE:NOTE provides a useful fact or helpful information.CAUTION:CAUTION indicates a condition that may result in minor or moderate injury.Enter : This illustration means to press the [Enter] key.Fn + F5 : This illustration means to press and hold the [Fn] key, then press the [F5] key.[start] - [Run]: This illustration means to click [start], then to click [Run]. For some applications, you may need to double-click.: Where to go for referred information. : This illustration means to refer to the Reference Manual, which is available on your computer.Refer to page 20 on how to access this manual.Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanationeasier to understand.The “CD/DVD drive” is a description about drives, such as DVD-ROM, CD-ROM, CD-R/RW, and DVD-ROM & CD-R/RW drives.This manual covers two types of models, as distinguished by the type of LCD screen (models with touchscreen and modelswithout touchscreen).If the user has logged on without the administrator authority, some functions may not be executable, and some screens maybe not displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions.Confirm the latest information on optional products in catalogs, etc.In this manual, “Microsoft® Windows® XP Professional” is indicated as “Windows” or “Windows XP”.Customer's RecordSerial No.orDate of PurchaseModel No.*Code No.Dealer's NameDealer's Address
3Getting StartedRead Me FirstFederal Communications Commission RadioFrequency Interference StatementNote: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordancewith the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee thatinterference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.Consult the Panasonic Service Center or an experienced ra-dio/TV technician for help.WarningTo assure continued compliance, use only shielded interfacecables when connecting to a computer or peripheral. Also,any changes or modifications not expressly approved by theparty responsible for compliance could void the user’s author-ity to operate this equipment.FCC RF Exposure Warning:This equipment complies with FCC radiation exposure lim-its set forth for an uncontrolled environment.This equipment has been approved for portable operation,and unless otherwise advised in separate supplemental in-structions for individual wireless transmitter(s), requiresminimum 1.5 cm spacing be provided between antenna(s)and all person’s body (excluding extremities of hands, wristand feet) during wireless modes of operation.This equipment may use multiple installed transmitters,which may be capable of simultaneous transmission.This equipment is provided with PC Card slot that could beused with wireless transmitters, which will be specificallyrecommended when they become available.Other third-party wireless transmitters have not been RF ex-posure evaluated for use with this computer and may notcomply with FCC RF exposure requirements.This equipment is provided with external antennaconnector(s) for connection to optional Car Mounter orPort Replicator for mobile external mounted antenna(s).External antenna(s) must be professionally installed andcannot exceed recommended maximum antenna gain asdescribed in individual provided supplement instructionsfor wireless transmitters. Also, user must maintain mini-mum 20 cm spacing between external antenna(s) and allperson’s body (excluding extremities of hands, wrist andfeet) during wireless modes of operation.This device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Responsible Party: Matsushita Electric Corporation of AmericaOne Panasonic WaySecaucus, NJ 07094Tel No:1-800-LAPTOP-5 (1-800-527-8675)For U.S.A.1. This equipment complies with CFR47 Part 68 rules. On thecomputer is a label that contains, among other information,the FCC registration number and ringer equivalence number(REN) for this equipment. If required, this information mustbe provided to the telephone company.2. An FCC compliant telephone cord and modular plug is pro-vided with this equipment. This equipment is designed to beconnected to the telephone network or premises wiring us-ing a compatible modular jack which is Part 68 compliant.See Installation Instructions for details.3. The REN is used to determine the quantity of devices whichmay be connected to the telephone line. Excessive RENs onthe telephone line may result in the devices not ringing in re-sponse to an incoming call. In most, but not all area, the sumof RENs should not exceed five (5.0). To be certain of thenumber of devices that may be connected to a line, as deter-mined by the total RENs, contact the local telephone com-pany.4. If your telephone equipment cause harm to the telephone net-work, the telephone company will notify you in advice thattemporary discontinuance of service may be required. But ifadvice notice isn’t practical, the telephone company will no-tify the customer as soon as possible. Also, you will be ad-vised of your right to file a complaint with the FCC if youbelieve it is necessary.5. The telephone company may take changes in it’s facilities,equipment, operations or procedures that could affect the op-eration of the equipment. If this happens the telephone com-pany will provide advance notice in order for you to makenecessary modifications to maintain uninterrupted service.6. If trouble is experienced with this equipment, for repair orwarranty information, please contact Matsushita ElectricCorporation of America at DIAL TOLL FREE 1-800-LAP-TOP5 (1-800-527-8675). If the equipment is causing harmto the telephone network, the telephone company may re-quest that you disconnect the equipment until the problem isresolved.7.There are no user serviceable parts contained in this equipment.8. This equipment may not be used on coin service provided bythe telephone company. Connection to party lines is subjectto state tariffs.9. The Telephone Consumer Protection Act of 1991 makes itunlawful for any person to use a computer or other electronicdevice to send any message via a telephone fax machine un-less such message clearly contains in a margin at the top orbottom of each transmitted page or on the first page of thetransmission, the date and time it is sent and an identificationof the business or other entry, or other individual sending themessage and the telephone number of the sending machineor such business, other entity, or individual. In order to pro-gram this information into your fax software, you should re-fer to the manual of the Fax software being used.FCC Regulation Notice for modemThis equipment contains a FCC approved modem.Manufacturer of modem: AMBIT Microsystems CorporationModel No. T60M283.** (** = numbers or alphabet letters)FOR HOME OR OFFICE USETested To ComplyWith FCC Standards
4Getting StartedRead Me FirstFor CanadaIndustry Canada (IC) Notice for modemThis equipment contains an Industry Canada approved modem unit.The Industry Canada label is affixed on the modem unit.EQUIPMENT ATTACHMENT LIMITATIONS“NOTICE: The Industry Canada label identifies certifiedequipment. This certification means that the equipment meetstelecommunications network protective, operational andsafety requirements as prescribed in the appropriate TerminalEquipment Technical Requirements document(s). TheDepartment does not guarantee the equipment will operateto the user’s satisfaction.Before installing this equipment, users should ensure that itis permissible to be connected to the facilities of the localtelecommunications company. The equipment must also beinstalled using an acceptable method of connection. Thecustomer should be aware that compliance with the aboveconditions may not prevent degradation of service in somesituations.Repairs to certified equipment should be coordinated by arepresentative designated by the supplier. Any repairs oralterations made by the user to this equipment, or equipmentmalfunctions, may give the telecommunications companycause to request the user to disconnect the equipment.Users should ensure for their own protection that theelectrical ground connections of the power utility, telephonelines and internal metallic water pipe system, if present, areconnected together. This precaution may be particularlyimportant in rural areas. Caution: Users should not attemptto make such connections themselves, but should contactthe appropriate electric inspection authority, or electrician,as appropriate.”“NOTICE: The Ringer Equivalence Number (REN) assignedto each terminal device provides an indication of themaximum number of terminals allowed to be connected to atelephone interface. The termination on an interface mayconsist of any combination of devices subject only to therequirement that the sum of the Ringer Equivalence Numbersof all the devices does not exceed 5.”REN: See bottom of the computerIndustry CanadaThis product complies with RSS210 Industry Canada.Operation is subject to the following two conditions;(1) this device may not cause interference, and(2) this device must accept any interference, including interfer-ence that may cause undesired operation of the device.RESTRICTIONS CONCERNANT LE RACCORDEMENTDE MATÉRIEL“AVIS: L’étiquette d’Industrie Canada identifie le matérielhomologué. Cette étiquette certifie que le matériel estconforme aux normes de protection, d’exploitation et desécurité des réseaux de télécommunications, comme leprescrivent les documents concernant les exigences tech-niques relatives au matériel terminal. Le Ministère n’assuretoutefois pas que le matériel fonctionnera à la satisfactionde l’utilisateur.Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’ilest permis de le raccorder aux installations de l’entreprise lo-cale de télécommunication. Le matériel doit également êtreinstallé en suivant une méthode acceptée de raccordement.L’abonné ne doit pas oublier qu’il est possible que la conformitéaux conditions énoncées ci-dessus n’empêche pas ladégradation du service dans certaines situations.Les réparations de matériel homologué doivent êtrecoordonnées par un représentant désigné par le fournisseur.L’entreprise de télécommunications peut demander àl’utilisateur de débrancher un appareil à la suite deréparations ou de modifications effectuées par l’utilisateurou à cause de mauvais fonctionnement.Pour sa propre protection, l’utilisateur doit s’assurer que tousles fils de mise à la terre de la source d’énergie électrique,des lignes téléphoniques et des canalisations d’eaumétalliques, s’il y en a, sont raccordés ensemble. Cetteprécaution est particulièrement importante dans les régionsrurales. Avertissement: L’utilisateur ne doit pas tenter de faireces raccordements lui-même; il doit avoir recours à un ser-vice d’inspection des installations électriques, ou à unélectricien, selon le cas.”“AVIS: L’indice d’équivalence de la sonnerie (IES) assignéà chaque dispositif terminal indique le nombre maximal determinaux qui peuvent être raccordés à une interface. Laterminaison d’une interface téléphonique peut consister enune combinaison de quelques dispositifs, à la seule condi-tion que la somme d’indices d’équivalence de la sonneriede touts les dispositifs n’excède pas 5.”IES: Voir sous le fond de l’ordinateur10.According to the FCC’s electrical safety advisory, we recom-mend that you may install an AC surge arrestor in the AC out-let to which this equipment is connected. Telephone compa-nies report that electrical surges, typically lightning transients,are very destructive to customer terminal equipment connectedto AC power sources and that this is a major nationwide prob-lem.“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecom-munication line cord.”“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement desconducteurs de télécommunications 26 AWG ou de section supérieure.”Notice for the products using LCDThis product uses one or more fluorescent lamps containing asmall amount of mercury. It also contains lead in some compo-nents. Disposal of these materials may be regulated in your com-munity due to environmental considerations. For disposal orrecycling information please contact your local authorities, orthe Electronics Industries Alliance: <http://www.eiae.org/>
5Getting StartedDeclaration of Conformity (DoC)“Hereby, we and Panasonic Service Europe GmbH (PSE), declares that this Personal Computer is in compliancewith the essential requirements and other relevant provisions of the Directive 1999/5/EC.”Hint:If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact to ourweb address: http://doc.panasonic-tc.deNetwork connection.The terminal equipment is intended for connection to the following public network;In all the countries of European Economical Area;- Public Switched Telephony NetworksTechnical Features.The terminal equipment includes the following features;- DTMF dialing- Maximum bitrate receiving mode: 56 kbits/s- Maximum bitrate sending mode: 33.6 kbit/sThis product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Netherlands, Swe-den, Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norwayand Austria.--------------------------------------------------------------------------------------------------------------------------------------------Compliance Notice - CE MarkThis equipment is in conformance with the requirements of the European Council Directive listed below:73/23/EEC Low Voltage Directive with amendment 93/68/EEC89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC1999/5/EC--------------------------------------------------------------------------------------------------------------------------------------------For EuropeDeclaration of Conformity (DoC)“Hereby, we and Panasonic Service Europe GmbH (PSE), declares that this Personal Computer is in compliancewith the essential requirements and other relevant provisions of the Directive 1999/5/EC.Hint:If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact to our web address: http://doc.panasonic-tc.de
6Getting StartedRead Me FirstImportant Safety Instructions / Importantes Mesures De SécuritéWhen using your telephone equipment, basic safety pre-cautions should always be followed to reduce the risk offire, electric shock and injury to persons, including the fol-lowing:1.Do not use this product near water, for example, near abath tub, wash bowl, kitchen sink or laundry tub, in a wetbasement or near a swimming pool.2.Avoid using a telephone (other than a cordless type) dur-ing an electrical storm. There may be a remote risk ofelectric shock from lightning.3.Do not use the telephone to report a gas leak in the vicin-ity of the leak.4.Use only the power cord and batteries indicated in thismanual. Do not dispose of batteries in a fire. They mayexplode. Check with local codes for possible special dis-posal instructions.SAVE THESE INSTRUCTIONSCertaines mesures de sécurité doivent être prises pendantl'utilisation de matérial téléphonique afin de réduire lesrisques d'incendie, de choc électrique et de blessures. Envoici quelquesunes:1.Ne pas utiliser l'appareil près de l'eau, p.ex., près d'unebaignoire, d'un lavabo, d'un évier de cuisine, d'un bac àlaver, dans un sous-sol humide ou près d'une piscine.2.Éviter d'utiliser le téléphone (sauf s'il s'agit d'un appareilsans fil) pendant un orage électrique. Ceci peut présenterun risque de choc électrique causé par la foudre.3.Ne pas utiliser l'appareil téléphonique pour signaler unefuite de gaz s'il est situé près de la fuite.4.Utiliser seulement le cordon d'alimentation et le type depiles indiqués dans ce manual. Ne pas jeter les piles dansle feu: elles peuvent exploser. Se conformer aux règlementspertinents quant à l'élimination des piles.CONSERVER CES INSTRUCTIONSThis product and your HealthThis product, like other radio devices, emits radio frequencyelectromagnetic energy. The level of energy emitted by this prod-uct however is far much less than the electromagnetic energyemitted by wireless devices like for example mobile phones.Because this product operates within the guidelines found inradio frequency safety standards and recommendations, we be-lieve this product is safe for use by consumers. These standardsand recommendations reflect the consensus of the scientific com-munity and result from deliberations of panels and committeesof scientists who continually review and interpret the extensiveresearch literature.In some situations or environments, the use of this product maybe restricted by the proprietor of the building or responsible rep-resentatives of the organization. These situations may for ex-ample include:Using this product on board of airplanes, orIn any other environment where the risk of interference to otherdevices or services is perceived or identified as harmful.If you are uncertain of the policy that applies on the use of wire-less devices in a specific organization or environment (e.g. air-ports), you are encouraged to ask for authorization to use thisproduct prior to turning on the product.Regulatory InformationWe are not responsible for any radio or television interferencecaused by unauthorized modification of this product. The cor-rection of interference caused by such unauthorized modifica-tion will be the responsibility of the user. We and its authorizedresellers or distributors are not liable for damage or violation ofgovernment regulations that may arise from failing to complywith these guidelines.Information to the UserLithium Battery!This computer contains a lithium battery to enable the date, time,and other data to be stored. The battery should only be exchangedby authorized service personnel.Warning! A risk of explosion from incorrect installation or mis-application may possibly occur.Pile au lithium!Le micro-ordinateur renferme une pile au lithium qui permet desauvegarder certaines données comme la date et l'heurenotamment. Elle ne devra être remplacée que par un technicienqualifié.Avertissement! Risque d'explosion en cas de non respect de cettemise en garde!Lithium Battery
7Getting StartedCare should be exercised with regard to the following in or-der to avoid the possibility of overheating, fire or damage.Avoid HeatDo not throw the battery pack into a fire or ex-pose it to excessive heat.Do Not DisassembleDo not insert sharp objects into the battery pack,expose it to bumps or shocks, deform, disassemble,or modify it.Do Not ShortDo not short the positive (+) and negative (-) con-tacts.Do Not Put into a MicrowaveDo not put the battery pack into a microwave ovenor a pressurized chamber.Avoid Extreme Heat, Cold and Direct SunlightDo not charge, use or leave the battery pack for ex-tended periods where it will be exposed to directsunlight, in a hot place (in an automobile on a sunnyday, for example), or in a cold place.Keep Articles AwayDo not place the battery pack together with articlessuch as necklaces or hairpins when carrying or stor-ing.Stop UsingShould the battery emit an abnormal odor, becomehot to the touch, become discolored, change shape,or become in any way different from normal, removeit from the computer or charger and stop using it.Do Not Use With Any Other ComputerThe battery pack is rechargeable and was intendedfor the specified computer or charger. Do not use itwith a computer other than the one for which it wasdesigned.Do not touch the terminals on the battery pack. The batterypack may no longer function properly if the contacts are dirtyor damaged.Do not expose the battery pack to water, or allow it to becomewet.Avoid Radio Frequency InterferenceDo not place the computer near a television orradio receiver.PrecautionsThe CF-29 was developed based on thorough research into thereal-world portable computing environments. Exhaustive pur-suit of usability and reliability under harsh conditions led to in-novations such has the magnesium alloy exterior, vibrationdamped hard disk drive and floppy disk drive, flexible internalconnections. The CF-29’s outstanding engineering has beentested using the stiff MIL-STD- 810F (for vibration and shock)and IP (for dust and water) based procedures.As with any portable computer device precautions should betaken to avoid any damage. The following usage and handlingprocedures are recommended.Avoiding low-temperature burnsAvoid more than casual contact with any heat pro-ducing area of the notebook computer, AC adap-tor, and any option or accessory you use with it.Even low heat, if warmer than body temperature,can cause a burn, if the skin is exposed to the heatsource for a long enough period of time.Avoid Magnetic FieldsKeep the computer away from magnets.Data stored on the hard disk may be lost.Keep Small Objects AwayDo not insert paper clips or other small objectsinto the computer.Do Not Disassemble the ComputerDo not attempt to disassemble your computer.Avoid Excessive Force on the DisplayDo not apply excessive downward force on thedisplay when it is completely opened, especiallywhen plugs and/or cables are connected to the rearof the computer.Before putting the computer away, be sure to wipe off any mois-ture.Precautions (Battery Pack)
8Getting StartedNOTEThe battery pack may become warm during rechargingor normal use. This is completely normal.Recharging will not commence if internal temperature ofthe battery pack is outside of the allowable temperaturerange (0 °C to 50 °C {32°F to 122 °F}). ( “Bat-tery Power”) Once the allowable range requirement issatisfied, charging begins automatically. Note that therecharging time varies based on the usage conditions. (Re-charging takes longer than usual when the temperature is10 °C {50 °F} or below.)If the temperature is low, the operating time is shortened.Only use the computer within the allowable temperaturerange.This computer has a high temperature mode function thatprevents the degradation of the battery in high tempera-ture environments. ( “Battery Power”) A levelcorresponding to a 100% charge for high temperature isapproximately equivalent to an 80% charge level for nor-mal temperature mode.The battery pack is a consumable item. If the amount oftime the computer can be run off a particular battery packbecomes dramatically shorter and repeated recharging donot restore its performance, the battery pack should bereplaced with a new one.When transporting a spare battery inside a package, brief-case, etc., it is recommended that it be placed in a plasticbag so that its contacts are protected.Always power off the computer when it is not in use.Leaving the computer on when the AC adaptor is notconnected will exhaust the remaining battery capacity.If the battery pack will not be used for a long period of time(a month or more), charge or discharge (use) the battery packuntil the remaining battery level becomes 30% to 40% andstore it in a cool, dry place.This computer prevents overcharging of the battery by re-charging only when the remaining power is less than approx.95% of capacity.The battery pack is not charged when the computer is firstpurchased. Be sure to charge it before using it for the firsttime. When the AC adaptor is connected to the computer,charging begins automatically.Should the battery leak and the fluid get into your eyes, do notrub your eyes. Immediately flush your eyes with clear waterand see a doctor for medical treatment as soon as possible.Precautions (Battery Pack)Read Me First
9Getting StartedNames and Functions of Parts( “LED Indicators”)( page 19)The illustrations shown may differ from the actual physical appearances.LED Indicators( “LED Indicators”)(Only for models with touchscreen: “Touchscreen”)For information on the key combinationsavailable ( “Key Combinations”).Power SwitchFor enhanced portability andin-the-field efficiency.Caps lockNumeric key lock (NumLk)Scroll lock (ScrLk)Multimedia pocket device statusHard disk drive statusPower status of the multimedia pocketBattery pack statusPower statusCarrying HandleTouch PadFunction Keys( “USB Devices”)Depending on the shape of the plug, some USBdevices cannot be connected to the USB port. Inthis case, use a commercially-available USB ex-tension cable.( “LAN”)( “Modem”)LAN( “Hard Disk Drive”)Hard Disk DriveLED Indicators( “Multimedia Pocket”)USB PortKeyboard( “Wireless LAN”)Wireless LAN AntennaCAUTIONDo not connect the modem telephonecable into the LAN port.DC IN 15.6VDC-IN Jack( “Battery Power”)Battery PackMultimedia Pocket (Floppy Disk Drive)A lithium ion battery thatis recyclable powers theproduct you have pur-chased. Please call 1-800-8-BATTERY for in-formation on how to re-cycle this battery.L’appareil que vous vousêtes procuré est alimentépar une batterie aulithium-ion. Pour desrenseignements sur lerecyclage de la batterie,veuillez composer le 1-800-8-BATTERY.Modem( “PC Cards”)PC Card SlotsPOWERHDDLCDCAUTIONDo not allow metallic objects ormagnetic media to come in closeproximity to this area.
10Getting StartedSerial PortExpansion Bus Connector( “Port Replicator”)External Keyboard/Mouse Port( “External Display”)Use this connector to connectheadphones or amplifier-equipped speakers. Audio out-put from the internal speaker isdisabled when headphones orexternal speakers are connected.Headphone Jack( “RAM Module”)SpeakerTo adjust the volume: Fn + F5 / Fn + F6Speaker on/off : Fn + F4RAM Module SlotSecurity LockA cable can be connected to prevent theft of your computer.For more information, read the manual that comes with thecable.LOCKExternal Display PortExternal Antenna ConnectorParallel PortNOTEWhen using an external microphone, do not remove the checkmark for “Mute” under “Microphone Balance” of the VolumeControl dialog box and do not increase the playback volume.Howling may result. Howling may occur in the same way whendisconnecting an external microphone. (The microphone of“Volume Control” is in the state of mute at the time of factoryshipment. This is not shown at the time of factory shipment.)Use only a monaural condenser microphone (miniature jack). Usingan input source other than a monaural condenser microphone maynot allow audio to be input or may damage the equipment.Microphone JackThe external antenna connector is for use as an exten-sion in the future.CAUTIONFCC RF Exposure Warning:This transmitter must not be co-located or oper-ated in conjunction with any other antenna ortransmitter.Optional Port Replicator contains TNC connec-tor for external mounted antenna. Employed an-tenna cannot exceed 7 dBi antenna gain and mustbe professionally installed. Also, must maintainminimum 20 cm spacing between external an-tenna and all person’s body during wireless modeof operation.CAUTIONDo not allow metallic objects or magnetic me-dia to come in close proximity to the speaker onthe bottom surface of the computer.• Because the speaker contains a magnet, metalobjects may become attached to the bottomsurface of the computer. This may cause thecomputer to be unstable, or may mark the sur-face of the desk on which it is sitting.• If floppy disks, magnetic memory cards, orother magnetic media approach the speaker,there is a risk that data will be destroyed.Names and Functions of PartsCAUTIONDo not cover the computer with a thick cloth, such as a blanket.
11Getting Started2Read the LIMITED USE LICENSE AGREEMENT. ( page 33)Be sure to read the LIMITED USE LICENSE AGREEMENT before breaking the sealon the computer’s packaging.3Insert the battery pack.1Unlock the cover by sliding the latch to the right.First-time OperationRead the steps below to help you learn what parts are included, and to gain an understanding ofsome basic computer-related operations.1Confirm the inclusion of all parts.Make sure the parts shown in the figure have been supplied. If any of these items aremissing or are not working properly, contact Panasonic Technical Support.Model No : CF-AA1653AModel No : CF-VZSU29Operating Instructions (This book)*1.......................................................... 1Windows® Book ...................................................................................... 1Product Recovery CD-ROM ................................................................... 3( “Touchscreen”)Soft Cloth .................................. 1 Stylus ..................................... 1<Only for models with touchscreen>Battery Pack.............................. 1 Modem Telephone Cable .......... 1AC Adaptor ............................... 1 AC Cord ..................................... 1LatchCover*1If additional instructions are included with the computer, be sure to read them. It may be neces-sary to perform additional operations during the following procedures.2Slide the latch down, and then without releasing it, open the cover as illustrated.
12Getting StartedFirst-time Operation6Turn your computer on.Slide the power switch and hold it for approximately one second until the power indi-cator turns on before releasing it.Do not slide the power switch and hold it for more than four seconds; this willcause the power to be turned off forcibly.Do not slide the power switch repeatedly.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.4Connect your computer to a power outlet.Be sure the AC adaptor is connected until completing the first-time use opera-tion.When using the computer for the first time, do not connect any peripheral de-vice except the battery pack and AC adaptor to the computer.Handling the AC adaptorDo not twist or pull the AC power cord forcefully. Doing so may damage theconnections.Use only the specified AC adaptor with your computer. Using an AC adaptorother than the one supplied might damage the battery and/or the computer.When the DC plug is not connected to the computer, disconnect the AC cordfrom your AC wall outlet.Problems such as sudden voltage drops may arise during periods of thunderand lightning. Since this could adversely affect your computer, an uninterruptiblepower source (UPS) is highly recommended unless the battery pack is installed.Power Indicator CAUTIONCAUTION5Open the display.1Pull the carrying handle forward.2Press the latch as illustrated.3Lift up the latch and open the display.CAUTIONDo not touch the terminals on the battery pack and the computer. The batterypack may no longer function properly if the contacts are dirty or damaged.Also, the computer may not operate properly.Be sure to insert the battery pack as illustrated.3Slide the battery pack inward until it is firmly in place.4Close the cover until it clicks into place.5Lock the cover by sliding the latch to the left.CAUTIONConfirm that the latch lock is correctly in place. If you carry your computerwithout the latch lock in place, the battery pack may fall out.Before using the battery pack, carefully read “Precautions (Battery Pack)”( page 7-8).DC-IN JackDC IN 15.6 VDC PlugPower Switch 34123LatchPOWER5
13Getting Started7Setup Windows.Moving the cursor ( ) or clicking buttons can be performed with the touch pad.The touchscreen does not work properly during the Windows setup.NOTESelect settings for your region, then select [Next].4Enter your name and organization and then select [Next].5Enter your computer name and administrator password and then select [Next].Do not press any keys or touch the touch pad until [Windows XP ProfessionalSetup] is displayed.CAUTION1At [Welcome to the Windows XP Setup Wizard], select [Next].2After reading the agreement, select [I accept this agreement] or [I don’t accept thisagreement], then select [Next].NOTEIf [I don’t accept this agreement] is selected, the Windows setup will be aborted.3CAUTIONRemember this password! If the password is forgotten, Windows cannot beoperated.6Enter the correct date, time and time zone, then select [Next].The computer will restart.7Enter your administrator password and select .Wait until the hard disk drive indicator ( ) has turned off.NOTE8<Only for models with touchscreen>Calibrate the touchscreen.1Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -[TouchScreen] - [Calibration].2Touch the “+” mark on the calibration screen with the stylus (included) for about onesecond.3After the calibration procedure is executed (e.g., after the nine “+” marks are touched),the procedure ends when Enter is pressed.4Select [OK].It will take some time for the computer to restart. Wait, and do not press anykeys, or touch the touch pad, etc.
14Getting StartedThis concludes the first-time use operation guidelines.9Create a new account.CAUTIONRemember this password! If the password is forgotten, Windows cannot be oper-ated. You can create a password reset disk beforehand ( page 15).When creating a new user account:• If you make mail settings, create password reset disks ( page 15), or conduct otherrelated operations before creating the user account, you will be unable to use anyprevious mail history or settings.• When you create the first new account, you can only select [Computer administrator].Once a “Computer Administrator” account has been created, you can create additionallimited user accounts.Note also that only the added user account will be displayed in the Welcome screen.The account for the administrator created during Windows setup will not be displayed.If the characters or icons on the screen are too small and difficult to see, after complet-ing step 9, select [start] - [All Programs] - [Panasonic], and select [Icon Enlarger]. Thiswill allow you to magnify the display of characters and icons on the screen.The [Icon Enlarger] can be set separately for each account.NOTEFirst-time Operation1Select [start] - [Control Panel] - [User Accounts] - [Create a new account].2Enter a name for the new account, then select [Next].3Select [Computer administrator], then select [Create Account].4<When you want to create a password for the new account>Select the new account you have created and select [Create a password].Follow the instructions on the screen to create a password.5Select [start] - [Turn Off Computer] - [Restart] to restart the computer.10Start up Windows Media Player.Log on with the administrator authority, and select on the screen.After this, start up the application following the instructions on the screen.During this process, you will be required to agree to the license agreement. For Win-dows Media Player, it is necessary to agree to the license agreement for each accountcreated.If [I Decline] is selected or a window is closed without any decision being made in thelicense agreement, no icons on the desktop may be selected. In this case, restart thecomputer.After completing the settings, select on the screen, and close the Windows MediaPlayer.If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wireless LAN”.NOTE
15Getting StartedInformation for Windows XPDepending on the Windows settings, installed applications, and drivers, menus and otherdisplays may differ, or some functions (such as use of the password reset disk) may beinoperable. Check with your system administrator for details.You can select Classic view for the Control Panel or select the Classic Start menu. You canalso change the way a user logs on or off.The procedure in this manual uses the method or view of the Windows XP default setting(not Classic view or Classic Start menu etc.).Resetting the passwordWindows XP has a function to reset a forgotten password.To use this function, you need to create a password reset disk beforehand following the stepsbelow.1Select [start] - [Control Panel] - [User Accounts].2Select [Prevent a forgotten password] from the [Related Tasks] menu of the account youhave logged on to, and create a password reset disk following the on-screen instructions.Store the password reset disk in a safe place.• Only the logon password for each account can be reset.The password set in the Setup Utility cannot be reset. ( “Setup Utility”)
16Operation1Open the display.Starting Up/Shutting DownStarting Up2Turn your computer on.Slide the power switch and hold it for approximately one second until the power indicatorturns on before releasing it.Under the condition that both the AC adaptor and the port replicator are not con-nected, the power will not go on if the display is closed.While booting, avoid the following until the hard disk drive indicator ( ) hasturned off.• Connecting or disconnecting the AC adaptor.• Touching the power switch.• Performing any keyboard, touch pad, touchscreen (only for models with touch-screen), or external mouse operations.• Closing the display.Once the computer is powered off, you must wait at least ten seconds before pow-ering it on again.When the CPU temperature rises, the computer may not power on to prevent theCPU from overheating. Should this happen, allow the computer to cool down thenswitch the power on again.If the computer still does not power on, contact Panasonic Technical Support.CAUTION1Pull the carrying handle forward.2Press the latch as illustrated.3Lift up the latch and open the display.Power Indicator Power Switch 123LatchThree incorrect attemptsorNo password for about a minuteThe correct password Will StartEnter your password*1 and press Enter . ( “Security Measures”) Will Not Start(Power off)If [Enter Password] is displayed*1Supervisor Password or User Password set in the Setup Utility (notthe Windows password).Enter Password [ ]POWERWhen the power is turned on, sometimes the message “Warming up the system (upto 20 minutes)” is displayed or the battery indicator alternately blinks green andorange. This function is designed to prevent hard disk drive malfunctions that mayoccur at low temperatures. Wait for the computer to start up.NOTE
17OperationThe power saving function is factory set, so if there is no input from a key, the touchpad, the touchscreen (only for models with touchscreen) or an external mouse (whenone is connected) for a certain interval of time, the power to the LCD and hard disk maybe turned off. The LCD will resume operation when the touch pad, the touchscreen(only for models with touchscreen) or an external mouse (when one is connected) isused or a key is pressed.The power to the LCD may be turned off even when an application software is beinginstalled. In this case, because it is conceivable that a selection dialog box will beshown, do not press Space or Enter to attempt to resume from this conditionas doing so may trigger a selection, but instead, press a key unrelated to the directtriggering of a selection, like Ctrl .In addition, when the computer is left alone, it automatically enters the standby or hiber-nation mode. The computer will resume by sliding the power switch. ( “Standby/Hibernation Functions”)NOTE3Log on to Windows.After confirming that the hard disk drive indicator ( ) has turned off, select the user andinput the password, then select . Until the correct password is entered, the computerwill not operate.4Select your application.You are able to start working on your computer.
18OperationShutting Down (power off your computer)To quickly resume computer operation after shutting down,The standby or hibernation function is available ( “Standby/HibernationFunctions”).When you leave the computer or interrupt your work...If you use the “Standby” or “Hibernation” function, then when you turn on thepower next time, the application software and files you were using before will bedisplayed, and you can restart the same operations immediately ( “Standby/Hibernation Functions”).NOTE1Save important data and close each application.2Select [start] - [Turn Off Computer].3Select [Turn Off].Your computer will power off automatically.Restarting your computer (without shutting down)Select [Restart].To shut down using the keyboard;Press , U , and select [Turn Off] with U .CAUTIONDo not do the following during the shutdown/restart procedure.• Connecting or disconnecting the AC adaptor.• Touching the power switch.• Performing any keyboard, touch pad, touchscreen (only for models with touch-screen), or external mouse operations.• Closing the display.4Close the display until the latch clicks into place.Starting Up/Shutting Down
19OperationFunctionTouch Pad (Basic Operation)Use the touch pad to move the cursor on the screen and perform computer operations. Forinstructions on how to operate, refer to “Touch Pad”.By design the touch pad is to be used with a finger tip only. Do not place any object on thework surface or press down forcefully with sharp-pointed objects (e.g., nails) or hard ob-jects that can leave marks (e.g., pencils and ball point pen).Try to avoid having any harmful substances such as oil, come in contact with the touchpad. The cursor may not work properly in such cases.When the touch pad becomes dirty:Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied withdetergent diluted with water and then thoroughly wrung.Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the sur-face, e.g., discoloration. In addition, do not use commercially-available household clean-ers and cosmetics, as they may contain components harmful to the surface.orTwo quick taps, but on thesecond tap leaving yourfinger down (applyingpressure) and moving iton the work surface.While holding downthe button, movingyour finger on thework surface.orTouch Pad OperationMoving the CursorTapping/ClickingDouble-Tapping/Double-ClickingDraggingorMove the tip of your finger lightly overthe surface.tapping clickingdouble-clickingHandling the Touch PadLeft ButtonRight ButtonWork Surfacedouble-tapping
20OperationReference ManualThe Reference Manual and the Important Tips can be accessed on your computer. When aprinter is connected, these manuals can also be printed.The Reference Manual explains functions for you to make greater use of the computer, suchas how to add peripheral devices, how the Setup Utility works, and other useful information.(Refer to the cover of this manual for a list of the main contents included.)Important Tips provides information on how to maximize use of the battery pack, which isnecessary for computing away from your home or office.It also offers helpful explanations on how to use the touchscreen more effectively. (only formodels with touchscreen)Illustrations may be difficult to view depending on the magnification. If the illustrationis too small, magnify the display.When the taskbar is hidden at the bottom portion of Acrobat Reader, set the maximumdisplay window size.If a printer is connected, we recommend printing pages. The illustrations and displaysamples may not print with a high quality.NOTEOpening the Reference Manual or Important TipsReference ManualSelect [Reference Manual] in [start].Important TipsSelect on the desktop.Important Tips can also be accessed from the following menu.Select [Important Tips] in [start] - [All Programs] - [Panasonic] - [On-Line Manuals].When the Reference Manual or Important Tips is started up for the first time, the License Agree-ment of the Acrobat Reader may be displayed. If it is displayed, after reading the agreement,select [Accept] to access the Reference Manual or Important Tips.Refer to Acrobat Reader Help to use the Acrobat Reader.
21OperationUseful InformationEnvironmentIn use: Temperature: 5 °C to 35 °C {41 °F to 95 °F}Humidity : 30% to 80% RH (No condensation)Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}Humidity : 30% to 90% RH (No condensation)Usage EnvironmentHandlingThis computer has been designed so as to minimize shock to the LCD and hard disk drive, theleakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided againstsuch trouble. Therefore, as a precision instrument, be extremely careful in the handling.Do not drop or hit your computer against solid objects.Do not carry your computer when it is on.Remove all external devices, cables, and PC Cards sticking out of the computer (see thefigure on the left) before transporting the computer.We recommend preparing a fully charged battery (and optional charger, if possible).When transporting spare batteries inside a package, briefcase, etc., it is recommended thatthe batteries be stored in a plastic bag.Do not place the computer upright or allow it to tip over. When the computer receivesextremely strong shock after falling, the hard disk or floppy disk drive, etc., may becomeinoperable.Do not carry the computer while the display is open, or carry it by gripping the display.Do not put anything (e.g., a piece of paper) between the display and keyboard.Always carry your computer with you when traveling. Never check it in with luggage. Foruse of the computer inside an aircraft, we recommend asking the airlines regarding theirpolicy on this issue.It is a good idea to make backup copies on disks and carry them with you.Do not leave a disk in the drive while transporting your computer.NOTEOnly use the computer within the allowable temperature range.When the computer is left powered on in a low temperature environment, set [Turn offhard disks] to [Never] in the following menu to avoid damage to the hard disk drive.[start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [PowerSchemes] Places not to use your computerSuch areas may result in damage to the computer.Areas with electronic equipmentThese areas may interfere with your display or cause your computer to produce strangesounds.Areas with extremely high/low temperaturesDo not leave things near the computer that are sensitive to heat. During operation, thecomputer may become warm.Before putting the computer away, be sure to wipe off any moisture.
22OperationUseful InformationMaintenanceTouch Pad page 19Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the sur-face, e.g., discoloration. In addition, do not use commercially-available household clean-ers and cosmetics, as they may contain components harmful to the surface.Do not directly add or spray water or detergent. If liquid enters the inside of the com-puter, it may cause it to work improperly or be damaged.Display<Models with touchscreen>Use the Soft Cloth included with the computer. (For more information, refer to “SuggestionsAbout Cleaning the LCD Surface” that come with the Soft Cloth.)If the Protective Film becomes dirty or damaged, it may be time to replace your ProtectiveFilm. The Protective Film is a disposable item. To find out the model number of your Protec-tive Film, contact Panasonic Technical Support. (For more information, refer to the “OperatingInstructions” that come with the Protective Film.)<Models without touchscreen>Avoid using water when cleaning the panel. Ingredients included in water may leave residueand reduce readability of the screen.<When cleaning dust/dirt>Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen.Sweep dust/dirt with fine brush, then wipe it with “dry” soft cloth used for cleaning glasses.<When cleaning oily surface>Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with drysoft cloth used for cleaning glasses.CAUTIONAreas excluding the displayWipe these areas with a soft cloth, after applying water or detergent diluted with water to thesoft cloth and firmly wringing out excess water.Do not touch or use a touchscreen before you re-attach a Protective Film, as you mayleave a mark or a scratch on the touchscreen.CAUTIONSaving Data on the Hard DiskDo not expose your computer to shock.Use care when handling your computer, shock may damage your hard disk or make yoursoftware applications and data unusable.Do not power off your computer while software applications are running or hard disk drive indica-tor ( ) is on.Properly shut Windows down to avoid problems.Save all valuable data to floppy disks, etc.Backing up data to floppy disks, etc. will limit damage should trouble occur to your com-puter or should you inadvertently change or erase data.Use the security function for all important data. ( “Security Measures”)Hard Disk LockWhen the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to thehard disk when the hard disk is installed in a different computer, since a password is also setfor the hard disk. When the hard disk is returned to the original computer, you can read andwrite data as before. In this case, however, make the settings in the Setup Utility exactly thesame as they were before the hard disk was removed. (Note that this Hard Disk Lock doesnot guarantee complete protection of data.) ( “Security Measures”)
23OperationWhen Using Peripheral DevicesPay strict attention to the following points to avoid damage to the computer, peripheral de-vices, cables, etc. Also, in addition to following this manual and the Reference Manual, care-fully read the instruction manuals for the peripheral devices being used.Use only peripheral devices that conform to the computer’s specifications.Connect the devices properly, paying close attention to the condition and position of theconnectors.If a connection cannot be made easily, do not apply undue force; check once more to con-firm the condition and position of the connector (alignment of pins, etc.) .If the connector has holding screws, fasten the screws firmly.Do not carry the computer with cables attached, and do not pull on the cables forcefully.Users are advised to purchase the latest versions of virus protection software and usethem regularly.We recommend you run the software:• When booting your computer.• After receiving data.We recommend that you check data received on disks or from external sources, such as datadownloaded from the Internet, e-mail, etc. (For compressed files, uncompress them beforerunning a check).Computer VirusesDo not power down your computer or press the disk eject button while the Multime-dia pocket device indicator ( ) is on.Doing so may damage the data on the floppy disk and render the floppy disk useless.Use care when handling floppy disks.To protect the data on your floppy disks or to prevent a floppy disk from becoming stuck inyour computer, avoid the following:• Sliding the shutter on the floppy disk manually.• Exposing the floppy disk to a magnetic field.• Storing the floppy disk in locations prone to high temperatures, low pitched noise, damp-ness, or dust.• Applying more than one label on the floppy disk.Confirm the contents of a floppy disk before formatting it.Confirm that no important data is on the floppy disk, because all data on the floppy diskwill be erased.Use the write-protect tab.This is a must for preserving important data. This prevents your data from being erased or over-written.Write EnableWrite DisableWrite-protect TabSaving Data on Floppy DisksTo prevent theft of data or unauthorized access to the hard diskvia a wireless LAN.If you plan to use wireless LAN functions, we recommend that you do so only after makingthe appropriate security settings, such as for data encryption.Wireless LAN
24OperationWhen Disposing of or Transferring Ownership of This DeviceWhen disposing of or transferring ownership of this device, erase all data on the hard disk inorder to prevent the theft of hard disk data. Even if you delete data or initialize the hard diskthrough normal Windows commands, data can still be read using special software. In order toerase all data, either have the data erased by a specialist (at a charge) or use the hard disk dataerase utility (included) ( page 39). (Note that this hard disk data erase utility does notguarantee that data will be completely erased.)Also, note that if you transfer ownership of this device without deleting commercial soft-ware that you have installed to the hard disk, you may be in violation of the licensingagreement for that software.When Changing Hard Disk PartitionsWhen using the hard disk backup function ( page 35), do not divide up the hard disk beforecreating a backup region. If you do this, the backup region cannot be created. Divide into thepartition when the backup region is created.Windows UpdateYou can use the latest patches and service packs for Windows with the following menus.Do not apply “Driver Updates” even if a message to update a driver appears. If a driverupdate is required, contact to Panasonic Technical Support.[start] - [All programs] - [Windows Update]Useful Information
25TroubleshootingList of Error CodesWhen turning on the computer, if one of the following error codes or messages is displayed, follow the instructions shown below.If the problem persists, or if the error code or message displayed is not shown here, contact Panasonic Technical Support.Error Code/Message0211: Keyboard error0251: System CMOS checksumbad - Default configurationused0271: Check date and time set-tings0280: Previous boot incomplete- Default configuration used02B0: Diskette drive A error0613: Serial Port*1 configura-tion changed0614: Serial Port*1 config. error- device disabled*1The port name, such as A or B, isdisplayed, indicating the conflict-ing ports.Press <F1> to resume, <F2> toSetupOperating System not foundActionIf an external keyboard or mouse is connected, disconnect these devices.An error has occurred in the memory that stores the Setup Utility settings. This error occurswhen the memory content is changed through some inadvertent operation by a program orother function.Run the Setup Utility and load the default values, then change the settings to the appro-priate values as needed.If the problem persists, the internal clock battery may need to be replaced. Contact Pana-sonic Technical Support.The data and time setting are incorrect.Run the Setup Utility and set the date and time correctly.If the problem persists, the internal clock battery may need to be replaced. Contact Pana-sonic Technical Support.Startup has failed repeatedly, so the Setup Utility settings have been returned to their defaultvalues, and the computer has been restarted. Run the Setup Utility and load the default values, then change the settings to the appropri-ate values as needed.Disconnect the floppy disk drive and reconnect it. Make sure the drive is secured cor-rectly.I/O address and IRQ settings are in conflict.Run the Setup Utility and change the settings in [Advanced] menu so there is no portconflicts.Write down the error details and press F2 to run the Setup Utility. Confirm thesettings, and change the settings to the appropriate values as needed.The OS is not properly installed on the floppy disk or the hard disk that you are trying toboot from.If the computer cannot be booted from the floppy disk, check the floppy disk drive toensure that the disk is in fact bootable, and change it to another if not.If the computer cannot be booted from the hard disk, confirm whether the hard disk isproperly recognized in [Information] menu of the Setup Utility.If the hard disk is recognized, perform the reinstallation procedure. If not, contact Pana-sonic Technical Support.If a device is connected to the USB port, disconnect the device, or run the Setup Utilityand set [Legacy USB Support] in [Security] menu to [Disable]. To run the Setup Utility1Restart the computer.2Press F2 while [Panasonic] boot screen is displayed soon after the computer begins the startup procedure.
Troubleshooting26The power indicator or bat-tery indicator is not litThe computer does not op-erate when a USB device isconnected[Enter Password] is dis-playedPOST Startup Error(s) isdisplayedWindows startup, or an op-eration is extremely slowThe date and time are incor-rectWhen resuming from thestandby or hibernationmode, [Enter Password]does not appear even if apassword has been set in theSetup UtilityWhen the administratorpassword is forgottenWhen “Remove disks orother media. Press any keyto restart” (or a similar mes-sage) is displayedWhen a problem occurs, refer to this page. The “Reference Manual” also contains detailed information. If a problem appears to berelated to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact PanasonicTechnical Support. You can use the PC Information Viewer to check the computer’s usage status. ( “Dealing withProblems (Advanced)”)Dealing with Problems (Summary) Starting UpCheck the cable connection for the AC adaptor.Check to see if a fully charged battery is properly installed.Remove the battery pack and disconnect the AC adaptor, then connect them again.The computer may not operate when certain USB devices are connected. Disconnect theUSB device, or set [Legacy USB Support] to [Disable] in [Security] menu of the SetupUtility.Input your Supervisor Password or User Password. If you have forgotten it, contact Pa-nasonic Technical Support. page 25Press F9 in the Setup Utility ( “Setup Utility”). This will restore the SetupUtility’s settings to their default values (except the password settings). Then, the SetupUtility must be run once again for you to input the appropriate operating environmentsettings. (The processing speed depends on the application software used, so this opera-tion may not cause the processing speed to increase.)Disable any resident software.You can set the date and time using the following menu.[start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time]If you continue to experience problems, the internal battery maintaining the clock mayneed to be replaced. Contact Panasonic Technical Support. When the computer is connected to a LAN, confirm the date and time of the server. This computer will not correctly recognize the date and time starting from the year 2100A.D.Even when a password has been set in the Setup Utility, [Enter Password] does not ap-pear when the computer resumes from the standby or hibernation mode.If you want to use the security function when using the standby or hibernation mode, usethe Windows password as follows:1Select the account to change in [start] - [Control Panel] - [User Accounts] and set thepassword.2Add the check mark for [Prompt for password when computer resumes from standby]in [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced].Set the password again in the following procedure.If you have created a password reset disk ( page 15 ), a message is displayed whenyou fail to correctly enter the password. Follow the message’s instructions and set thepassword again by using the password reset disk.If you have not created a password reset disk, after reinstalling, setup Windows and thenset the password again.This means a floppy disk that does not contain system startup information has been left inthe floppy disk drive. Remove the floppy disk, and press any key.This message may appear when certain USB devices are connected. Remove the USBdevice, or set [Legacy USB Support] in [Security] menu of the Setup Utility to [Disable].If the message still appears even after trying the above two measures, this may be anindication that some type of hard disk failure has occurred. Contact Panasonic TechnicalSupport.
27TroubleshootingWhen the previous item isnot the cause Starting Up (continued)Press F9 in the Setup Utility ( “Setup Utility”). This will restore the SetupUtility’s settings to their default values (except the password settings).Try removing all peripheral devices.Check a disk error using the following procedure.1Select [Local Disk(C:)] with the right button in [start] - [My Computer], and select[Properties].2Select [Tools] - [Check Now].3Select [Start] after selecting required items in [Check disk options].At startup, hold down F8 when [Panasonic] boot screen disappears*1, and releaseyour finger when the Windows Advanced Options Menu is displayed. Start the computerin Safe Mode, and confirm the details of the error.*1When [Password on boot] is set to [Enable], [Enter Password] appears after the [Panasonic] bootscreen disappears. Hold down F8 soon after inputting the password and pressing Enter .No display after powering onThe power has not beenturned off, but after a cer-tain period of time, there isno displayWhen the battery pack isused, the screen is darkerthan when the AC adaptoris connectedAn afterimage appears (e.g.,green, red, and blue dotsremain on the display) orthere are dots not display-ing the correct colorsThe external display nolonger displays properlyWhen you want to displaythe fonts or icons at a largersizeWhen there is no display to an external display,• Check your cable connection to the external display.• Confirm your display is powered on.• Check the settings for your external display.The display destination may be set to the external display.Try changing the display destination by pressing Fn + F3 .If you want to switch the display destination repeatedly by pressing Fn + F3 , makesure that the display destination has switched completely each time before pressing Fn + F3 again.Press Fn + F2 and adjust the brightness.Has the computer been set to the power-saving mode?To resume operation of your computer from the condition the power of the display is off(for energy conservation purposes), press any key unrelated to the direct triggering of aselection, like Ctrl .To save power, your computer may have automatically entered the standby mode (powerindicator blinks green) or hibernation mode (power indicator turns off). In such cases,slide the power switch.Press Fn + F2 and adjust the brightness. Note, however, that when the brightnessis increased, the battery running time will become shorter.Brightness can be set to separate levels for when the AC adaptor is connected and whenit is disconnected.If an image is displayed for a prolonged period of time, an afterimage may appear. Thisis not a malfunction. The afterimage will disappear when a different screen is displayed.High-precision and advanced technologies are necessary in the production of color liquidcrystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements eitherfail to light or remain constantly lit (that is, more than 99.998% of elements are function-ing properly), no defect is considered to exist.When an external display not compatible with the power saving mode is used with thecomputer, the display may not function correctly when the computer enters the powersaving mode. In such cases, turn off the power to the external display.Change the size of the icons, etc. using “Icon Enlarger” ( “Icon Enlarger”). Display
Troubleshooting28Dealing with Problems (Summary)During simultaneous dis-play, one of the screens be-comes disorderedWhen an a moving picturesuch as an MPEG file is be-ing played with MediaPlayer, the display destina-tion cannot be switched us-ing Fn + F3Try changing the display by pressing Fn + F3 .If you continue to experience problems, try changing the display destination in the fol-lowing menu.[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics 2M] - [Devices]When the [Command Prompt] is set to “Full Screen” by pressing Alt + Enter , thepicture is displayed on one of the screens only. When the window display is restored bypressing Alt + Enter , the picture is displayed on both screens.The display destination cannot be switched while a moving picture such as an MPEG fileis playing. Stop playing the moving picture before switching the display destination. Display (continued)Windows cannot be shutdown or restarted Shutting DownIf a USB device is connected, try removing it. Battery IndicatorThe red indicator lights.The red indicator blinksThe orange indicator blinksThe green indicator blinksThe battery indicator blinksgreen and orange alternatelyThe battery level is very low (the charge is approx. 9% or less).Connect the AC adaptor. You can use the computer when the battery indicator light isorange. If you do not have an AC adaptor, save your data and power off your computer.After replacing the battery pack with a fully charged one, turn your computer on.Quickly save your data and power off your computer. Remove the battery pack and dis-connect the AC adaptor, then connect them again.If the problem persists, contact Panasonic Technical Support. Possible failure in thebattery pack or charging circuit.Battery cannot be recharged temporarily because the internal temperature of the batterypack is outside of the acceptable temperature range for recharging. Once the allowablerange requirement is satisfied, charging begins automatically. Your computer can beused normally in this state.In high temperature mode, the battery is discharging to the level that corresponds to an80%*1 charge for normal temperature mode. ( “Battery Power”) Do not re-move the battery pack while the battery indicator is blinking green.*1 In high temperature mode, the level that corresponds to an 80% charge for normal temperaturemode is displayed as [100%].Warming up the system to prevent hard disk drive malfunctions at low temperature. Leaveyour computer as is. Once the allowable temperature range requirement is satisfied, yourcomputer will start automatically.
29TroubleshootingSome applications may notwork properlyWhen switching to a different user with the Fast User Switching function, the followingproblems may occur.• Some applications may not work properly.• Key combinations with the Fn key may not work.• It may not be possible to set the settings of the display.• A serial mouse may not work.• Wireless LAN may not work.In this case, log off all users without using Fast User Switching function, and try theoperation once more. If the problem persists, restart the computer. Fast User Switching function OthersPress Ctrl + Shift + Esc to open Task Manager and close the software applicationwhich is not responding.After shutting down by sliding the power switch for more than four seconds, slide thepower switch to power on and open the application again.If the program no longer works normally, delete the program using the following menu.Then reinstall the program.[start] - [Control Panel] - [Add or Remove Programs]No response Touch Pad / Touchscreen (only for models with touchscreen)If you are using an external mouse, ensure that the external mouse has been connectedcorrectly.Restart the computer by using the keyboard (Press , U , and select [Restart] with R ).If the computer does not respond to keyboard commands, read “No response”( below).When the Microsoft® IntelliMouse™ Wheel mode or the original mode is set for thetouch pad, only scroll operations are possible for the right part or bottom part of the touchpad. In this case, cursor operations are possible by using the work surface excluding theright part or bottom part. When no mode is set, the entire surface of the touch pad can beused for cursor operations.Has the Setup Utility been used to set [Touch Pad] to [Enable]?When external mouse drivers are installed (e.g., Intellimouse), the touch pad may not beused.Has the touch pad driver been properly installed?As a result of the physical characteristics of the touchscreen, sometimes the position ofthe stylus does not match the position of the cursor on the screen. This is not a malfunc-tion. Perform [Calibration] ( page 13).Has the Setup Utility been used to set [Touchscreen] to [Enable]?When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable to beused.Has the touchscreen driver been properly installed?The cursor cannot be con-trolled properlyThe cursor does not move inscrolling area of the touchpadUnable to input using thetouch padUnable to point correctlywith the stylus includedwith the computerUnable to input by touchingthe displayThe Reference Manual isnot displayedIs Acrobat Reader installed?If Acrobat Reader is not installed, run [c:\util\reader\acroreader51_enu_full.exe] in [start]- [Run] to reinstall the program. When installing the program, do not change the instal-lation destination folder. If the destination folder is changed, the Reference Manual can-not be opened from the [start] menu. Reference Manual
Troubleshooting30Dealing with Problems (Summary) Others (continued)When trying to play backvideo files using Windows®Media Player, the message[Codec required] appears,and the file cannot be playedbackThe shortcut icon for theWindows® Media Player isnot displayed on the desktopTwo shortcut icons for theWindows® Media Player aredisplayed on the desktopSome video files use a Codec that is not installed as a standard. In these cases, if you playback the video file after connecting to the Internet, the Codec may be downloaded auto-matically, allowing you to play back the file.Start up Windows® Media Player from [start] - [All Programs]. Also, you can copy theicon from [All Programs] list to the desktop and use this icon to start Windows® MediaPlayer.Did the user who first accepted the Windows® Media Player license agreement have theadministrator authority? Two icons will be displayed until someone with the administratorauthority accepts the license agreement, but either icon can be used to start the program.
31TroubleshootingReinstalling SoftwareBefore ReinstallationPreparing• Product Recovery CD-ROM (included)• Panasonic CD/DVD drive (optional: Confirm the latest information on optional products in catalogs, etc.)ReinstallingImportantBefore the reinstallation procedure, remove all peripherals (except for the CD/DVD drive).Be sure the AC adaptor is connected until the reinstallation procedure is completed.When reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data onyour hard disk to another media or to an external hard disk before running the reinstallation procedure.The reinstallation procedure will return the computer to its original condition.Even if a hard disk backup area has been created, this backup area will be erased, and all the backed up data will be lost.(This is not the case when Windows is reinstalled in the first partition.)• If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation procedure.1Turn off the computer and insert the CD/DVD drive intothe multimedia pocket. ( “Multimedia Pocket”)2Turn on the computer, and press F2 while [Panasonic]boot screen is displayed.The Setup Utility will start up.If the password has been set, enter the Supervisor Pass-word.3Write down all of the contents of the Setup Utility andthen press F9 .At the confirmation message, select [Yes] and press Enter .4Select [Boot] menu, then select [CD/DVD Drive] andpress F6 until [CD/DVD Drive] is at the top of the[Boot] menu.5Place the disc number one of the recovery CDs into theCD/DVD drive.6Press F10 .At the confirmation message, select [Yes] and press Enter . The computer will restart.<When the hard disk backup function has been enabled>When the message [The Backup function has been en-abled. If [Recovery] or [Erase HDD] is executed, theBackup function will be disabled, and your Backup datawill be lost.] appears, press Y .7Press 1 to execute [1.[Recovery]].(You can cancel this operation by pressing 0 .)The License Agreement screen should appear.---------------------------------------------------------------------Select a number---------------------------------------------------------------------Reinstalling : Windows(R) XP Professional1. Reinstall Windows to the whole HDD to factory default.2. Make two partitions, for the operating system and data. And reinstallWindows to the operating system partition.(All existing partitions on HDD will be lost.)3. Reinstall Windows to the first partition.0. Cancel---------------------------------------------------------------------8Press 1 to select [1. Yes, I agree to the provisions aboveand wish to continue!].This screen should appear.
Troubleshooting32Do not interrupt the reinstallation procedure be-fore completion, for example by turning off thecomputer or pressing Ctrl + Alt + Del , asthis may prevent Windows from starting up, or maycause data to be lost so that the reinstallation pro-cedure cannot be executed.When a message appears instructing you to insertthe next CD, insert the recovery CD showing thenext number in the sequence, and then select [OK].If the message [The media does not contain thecorrect file] appears, select [OK]. A message willappear instructing you to insert the next CD.Confirm that the proper recovery CD has been in-serted by opening the cover of the CD/DVD driveand then close the cover, then select [OK].CAUTION10At the confirmation message , press Y .The operation of reinstallation for the hard disk starts au-tomatically. (The operations take about 15 minutes.)14Press F9 .At the confirmation message, select [Yes] and press Enter . (The Setup Utility settings will return to theirdefault values. Even the security settings with the ex-ception of the password(s) will return to their defaultvalues.)15Select [Exit] and then select [Save Current Values], thenpress Enter .At the confirmation message, select [Yes] and press Enter .16Turn the computer off by sliding the power switch.17Perform the first-time use operation ( page 12 step 6- page 14 step 10 ).18Run the Setup Utility and change the settings where nec-essary.<Changing the drive letter>You can change the drive letter for the CD/DVD drive orhard disk drive by the following steps.Drive letters can only be changed when two or more parti-tions have been created on the hard disk drive. The nameof the C: drive cannot be changed.We recommend that you make these changes before in-stalling applications.1Select [start] - [Control Panel] - [Performance and Main-tenance] - [Administrative Tools] - [Computer Manage-ment].2Select [Disk Management] from [Storage].3Right click on the partition of the hard disk or the name ofthe CD/DVD drive and select [Change Drive Letter andPaths...].4Select [Change].5Select [Assign the following drive letter] and select thenew drive letter, and then select [OK].6At the confirmation message, select [Yes].9Make a selection from the menu.When selecting [2], enter the basic partition size forthe operating system installation and press Enter .(The data partition size is the remainder after subtract-ing the basic partition size.)To select [3], the initial partition size must be 6 GB ormore of the hard disk size. Reinstallation cannot beperformed with a small partition size.<When the hard disk backup function has been enabled>If you select [1] or [2], the message [The Backup func-tion has been enabled. If [Recovery] is executed, theBackup function will be disabled, and your Backup datawill be lost.] appears. In this case, press Y .If the message [Computer must be rebooted in order toexecute [Recovery.]] appears, press R .When [2] is selected, the hard disk backup func-tion cannot be enabled because the hard disk hasbeen divided into partitions.NOTEIf additional instructions are included with the computer,be sure to read them. It may be necessary to performadditional operations during the following procedures.NOTE11After the reinstallation procedure completes, this screenshould appear.Remove the recovery CD, and then press any key.The computer will be shut down.----------------------------------------------------------------[Recovery] is complete.Windows(R) XP Professional install wizard will start after reboot.Please remove the Product Recovery CD-ROM, and turn off the computer.----------------------------------------------------------------12Remove the CD/DVD Drive.13Turn on the computer, and press F2 while [Panasonic]boot screen is displayed.The Setup Utility will start up.If the password has been set, enter the Supervisor Pass-word.Reinstalling Software
33AppendixLIMITED USE LICENSE AGREEMENTTHE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC® PRODUCT (“PRODUCT”)ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITHTHE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMEDTO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.Matsushita Electric Industrial Co., Ltd. (“MEI”) has developed or otherwise obtained the Programs and hereby licensestheir use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) toachieve your intended results, and for the installation, use and results obtained therefrom.LICENSEA. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs inaccordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving onlya LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title,ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms,concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all ofwhich title, ownership and rights shall remain with MEI or its suppliers.B. You may use the Programs only on the single Product which was accompanied by the Programs.C. You and your employees and agents are required to protect the confidentiality of the Programs. You may notdistribute or otherwise make the Programs or related documentation available to any third party, by time-sharingor otherwise, without the prior written consent of MEI.D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentationfor any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support ofyour use of the Programs on the single Product which was accompanied by the Programs. You shall not modify,or attempt to modify, the Programs.E. You may transfer the Programs and license them to another party only in connection with your transfer of thesingle Product which was accompanied by the Programs to such other party. At the time of such a transfer, youmust also transfer all copies, whether in printed or machine readable form, of every Program, and the relateddocumentation, to the same party or destroy any such copies not so transferred.F. You may not remove any copyright, trademark or other notice or product identification from the Programs andyou must reproduce and include any such notice or product identification on any copy of any Program.YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACETHE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, INWHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMIT-TED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.TERMThis license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminatethis license at any time by destroying, at your expense, the Programs and related documentation together with allcopies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditionstherefor set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Uponany such termination, you agree to destroy, at your expense, the Programs and related documentation together with allcopies thereof in any form.YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUNDBY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT,ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-TER OF THIS AGREEMENT.About Intel® software productsThe enclosed software products and documentation were developed at private expense, and are provided with “RESTRICTEDRIGHTS.” Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 andDFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment ofIntel's proprietary rights in the product.
34AppendixContrat de licence d’usage limitéLe(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic® (le “Produit”) sont exclusivement concédés enlicence à l’utilisateur ultime (“vous”), et ils ne peuvent être utilisés que conformément aux clauses contractuelles ci-dessous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et condi-tions des présentes.Matsushita Electric Industrial Co., Ltd. (“MEI”) a mis au point ou obtenu les Logiciels et vous en concède l’utilisation parles présentes. Vous assumez l’entière responsabilité du choix de ce Produit (y compris des Logiciels associés) pourobtenir les résultats escomptés, ainsi que de l’installation, de l’utilisation et des résultats obtenus.LicenceA. MEI vous octroie par les présentes le droit et la licence personnels, non cessibles et non exclusifs d’utiliser lesLogiciels conformément aux termes, clauses et conditions de ce contrat. Vous reconnaissez ne recevoir qu’undroit limité d’utiliser les Logiciels et la documentation les accompagnant et vous vous engagez à n’obtenir aucundroit de titre, propriété ni aucun autre droit vis-à-vis des Logiciels et de la documentation les accompagnant nivis-à-vis des algorithmes, concepts, dessins, configurations et idées représentés par ou incorporés dans lesLogiciels et la documentation les accompagnant, dont les titres, la propriété et les droits resteront tous à MEI ouà leurs propriétaires.B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagné par les Logiciels.C. Vous et vos employés ou agents êtes requis de protéger la confidentialité des Logiciels. Vous ne pouvez nidistribuer ni mettre les Logiciels et la documentation les accompagnant à la disposition d’un tiers, par partagede temps ou de quelque autre manière que ce soit, sans l’autorisation écrite préalable de MEI.D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documen-tation les accompagnant pour quelque fin que ce soit, à l’exception d’une (1) copie des Logiciels à des fins desauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagnépar les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels.E. Vous ne pouvez céder les Logiciels et en octroyer la licence à une autre partie qu’en rapport avec votre cessiondu Produit unique qui est accompagné par les Logiciels à cette autre partie. Au moment de cette cession, vousdevez céder également toutes les copies, que ce soit sous forme imprimée ou lisible par la machine, de tous lesLogiciels ainsi que de la documentation les accompagnant, à la même partie ou détruire les copies non cédées.F. Vous ne pouvez retirer aucune marque de droits d’auteur, marque de commerce ou autre ni aucune identifica-tion de produit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produitsur toutes les copies des Logiciels.Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurscopies, de façon électronique ou mécanique, en tout ou en partie.Vous ne pouvez utiliser, copier, modifier, altérer ni céder les Logiciels ni aucune de leurs copies, en tout ou en partie,à l’exception de ce qui est expressément stipulé dans ce contrat.Si vous cédez la possession de toute copie ou de tout Logiciel à une autre partie, à l’exception de ce qui est autoriséau paragraphe E ci-dessus, votre licence est automatiquement résiliée.Termes, clauses et conditionsCette licence n’est effective que pour la durée de possession ou de crédit-bail du Produit, à moins d’une résiliationantérieure. Vous pouvez résilier cette licence à tout moment en détruisant, à vos frais, les Logiciels et la documentationles accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera également résiliée,avec application immédiate, si les conditions de résiliation définies ailleurs dans ce contrat se sont réalisées ou si vousne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la résiliation, vous acceptez dedétruire, à vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque formeque ce soit.Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accepté de respecter ses termes,clauses et conditions. Vous reconnaissez en outre qu’ils sont la description complète et exclusive du contrat concluentre nous, contrat qui remplace et annule toute proposition ou contrat précédent, écrit ou oral, et toute autre commu-nication entre nous, relativement à l’objet du présent contrat.
35AppendixHard Disk Backup FunctionThe hard disk backup function creates a backup area (storage area) on the hard disk. This area is to back up (store) hard diskcontents or restore backed up contents to their original locations.By backing up the data on your hard disk to a backup area, you can protect your data from loss or damage resulting from opera-tional errors or other factors. Also, you can back up or restore hard disk contents using this computer alone, without having to useother media or peripheral devices.At the time of purchase, the hard disk backup function is disabled. If you follow the procedure below to create a backup area, thehard disk backup function will be enabled, and you will be able to back up your data. Note, that once the backup function has beenenabled, you will have to perform the reinstallation procedure to disable it again ( page 31).Disconnect or remove all peripheral devices (except for the CD/DVD drive), as the backup areamay not be created properly while these devices are connected.Be sure the AC adaptor is connected to the computer.A backup area cannot be created if the hard disk is already divided into several partitions. Returnthe computer to its condition at the time of purchase (one partition only), and create the backuparea.To divide the partition, make the selection when the backup area is created ( page 36 step 8).If the partition configuration is changed (partitions created, size changed, etc.) after the backuparea has been created, it will no longer be possible to execute the backup function. To change theconfiguration, it is necessary to return the computer to its condition at the time of purchase, andthen create the backup area again.The hard disk backup function will only work for the internal hard disk. This function does notwork with an external hard disk or the second hard disk (optional).Backup and restore functions will not operate if the hard disk has been damaged.Do not use the NTFS file system compression function, as this may result in insufficient capacityof the backup area.If the hard disk malfunctions, it will be impossible to read the data stored on it. We recommendthat you also back up important data to a location other than the hard disk (an external hard diskor other media).Execute a disk error check using the following procedure.1Select [Local Disk(C:)] with the right button in [start] - [My Computer], and select [Properties].2Select [Check Now] from [Tools].3In [Check Disk], select [Start] without adding a check mark beside any of the items.If a message is displayed indicating that there is an error in the disk, display [Check Disk], andadd a check mark for [Automatically fix file system errors] and [Scan for and attempt recov-ery of bad sectors], select [Start], and check for disk errors again.The hard disk backup function does not accommodate dynamic disks. Do not convert the harddisk to a dynamic disk.The hard disk backup function cannot back up or restore data properly if there is a problem with the hard disk when the data isbacked up or restored. Note that if an error occurs while data is being restored, whether as a result of an unexpected malfunc-tion, incorrect operation, or other reason, the data in the hard disk (data before restoration) may be lost.Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damages suffered by the user (including loss of data)as a result of the use of this function.Before Using a Hard Disk Backup FunctionPreparingProduct Recovery CD-ROM (included)Panasonic CD/DVD drive (optional: Confirm the latest information on optional products in cata-logs, etc.)
36Appendix1Turn off the computer and insert the CD/DVD drive into the multimedia pocket. ( “Multimedia Pocket”)2Turn on the computer, and press F2 while [Panasonic] boot screen is displayed.The Setup Utility will then start.If a password has been set, enter the Supervisor Password. You cannot register [Boot] menuwith a User Password.3Select [Boot] menu, then select [CD/DVD Drive] and press F6 until [CD/DVD Drive] is atthe top of the [Boot] menu.4Place the disk number one of the recovery CDs into the CD/DVD drive.5Press F10 .At the confirmation message, select [Yes] and press Enter .The computer will restart. If [Enter Password] is displayed during the following procedures,input the Supervisor Password or the User Password.This screen should appear.6Press 3 to execute [3.Backup].Regarding backup area• Requires availability of at least half of the entire hard disk. Without sufficient spaceavailable, the backup area cannot be created.• When the backup area is created, the usable hard disk capacity will be reduced to lessthan half.• The backup area cannot be accessed from Windows. For this reason, backed up datacannot be copied to CD-R or other removable disk media.• When the hard disk backup function is executed, data in the backup area will beoverwritten. If newly created or edited data is backed up later, data stored previouslyin the backup area will be lost.NOTECreate a Backup AreaWhen dividing the hard disk into partitionsDo not execute [1. Recovery] to divide the hard disk into partitions. The hard diskbackup function cannot be enabled after the hard disk has been partitioned. Use proce-dure 8 to divide the hard disk.CAUTIONThe usable hard disk area[At the time of purchase] [After the backup area is created]The backup areaCannot be accessedfrom Windows.Can be accessed fromWindows (One partition).7At the confirmation message, press Y .8Select how to divide the hard disk from the menu.<To create a backup area and enable the backup function without dividing the hard disk> Select [1].---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. [ Recovery ] Reinstall Windows.2. [ Erase HDD ] Erase the whole data on HDD for security.3. [ Backup ] Enable the Backup function.0. [ Cancel ] Cancel.---------------------------------------------------------------------Hard Disk Backup Function
37Appendix9When the confirmation message is displayed, press Y .The backup area is then created.10When the message [You must reboot in order to enable the Backup function] appears, removethe recovery CD, and press any key to restart the computer. The computer is restarted, then thebackup process will begin.11 When the message [[Backup] is complete] appears, press Ctrl + Alt + Del to restart thecomputer.Do not press Ctrl + Alt + Del until the message is displayed.CAUTIONThe [Boot] menu in the Setup Utility is set to start up from the CD/DVD drive. Change thissetting if necessary.The next time the backup or restore functions are executed, follow the procedure for [Back-ing Up and Restoring Data] ( below).NOTE1Turn the computer on, and press F2 while [Panasonic] boot screen is displayed.The Setup Utility will start up.If a password has been set, enter the Supervisor Password or the User Password.2Select [Exit] menu, then select [Hard Disk Backup / Restore] and press Enter .At the confirmation message, select [Yes] and press Enter .Backing Up and Restoring DataBefore executing the backup function, execute a disk error check ( page 35).Do not interrupt the backup or restore functions before completion, for example by turningoff the power or pressing Ctrl + Alt + Del , as this may prevent Windows fromstarting up, or may cause data to be lost so that the backup and restore functions cannot beexecuted.CAUTION12A message will appear advising that a new device has been installed and that the computermust be restarted to enable the settings. Select [Yes] to restart the computer.<To create a backup area and divide hard disk into two partitions, for OS and data>Select [2], enter the partition size (GB), and press Enter .• You can cancel this operation by pressing 0 .• The data partition size will be the maximum settable size less the number entered above.The maximum settable size will differ depending on models.The usable hard disk area[At the time of purchase] [After the backup area is created]The backup areaCannot be accessedfrom Windows.Can be accessed fromWindows (Two partitions).
38AppendixTo disable the hard disk backup functionPerform the reinstallation procedure. All data in the backup area and the hard disk will beerased.Conduct steps 1-8 for [Reinstalling Software] ( page 31). Select [1] or [2] to execute thereinstallation at the screen for executing the reinstallation.• When [1] is selected, the hard disk backup function can be disabled.• When [2] is selected, the hard disk backup function can be disabled, but in this case, becausethe hard disk has been divided into partitions, the hard disk backup function cannot bere-enabled ( page 24).• When [3] is selected, the hard disk backup function cannot be disabled.CAUTIONWhen the hard disk backup function has been enabled, even if a commercial data erasingutility or similar software is used to erase all data from user-accessible area, the backed updata will not be erased. You can use the hard disk data erase utility included in this com-puter ( page 39) to erase all data on the hard disk, including backed up data. Use thishard disk data erase utility before disposing of or transferring ownership of this computer.Occasionally, the message [#1805 cannot write image file] will be displayed, and the backupfunction will be interrupted. If this error occurs, execute the backup function again. Afterthis, if the backup function is completed properly, then there is no problem in the hard disk.4When the message [[Backup] is complete] or [[Restore] is complete] is displayed, press Ctrl + Alt + Del to restart the computer.• If the backup or restore process was interrupted before completion, for example if the powerwas turned off, execute the process again.• When a new device is installed and a message appears advising that the computer must berestarted to enable the settings, select [Yes] to restart the computer.3Select the operation to be executed from the menu.<To back up hard disk contents to the backup area>1 Press 1 to execute [1. [Backup]].(When dividing the hard disk into two partitions, select the backup method at next screen.)2At the confirmation message, press Y .The backup process will begin.<To restore backed up contents to the hard disk>1 Press 2 to execute [2. [Restore]].(When data is backed up in two partitions, select the restore method at next screen.)2At the confirmation message, press Y .The restore process will begin.The time required to complete the backup or restore process differs depending on thedata volume.NOTEHard Disk Backup Function
39AppendixHard Disk Data Erase UtilityThis computer is equipped with a utility for erasing hard disk data.When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard diskdata following the steps below.The hard disk data erase utility erases data using an “overwriting” method, but there is a possibility that due to malfunctions orother operational errors, data may not be completely erased. There are also specialized devices that may be able to read datathat has been erased using this method. If you need to erase highly confidential data, we recommend that you contact acompany that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses ordamages suffered as a result of the use of this utility.PreparingProcedureProduct Recovery CD-ROM (included)Panasonic CD/DVD drive (optional: Confirm the latest information on optional products in catalogs, etc.)1Turn off the computer.2Insert the CD/DVD drive into the multimedia pocket.( “Multimedia Pocket”)3Turn on the computer, and press F2 while [Panasonic]boot screen is displayed.The Setup Utility will start up.If the password has been set, enter the SupervisorPassword.4Select [Boot] menu, then select [CD/DVD Drive] andpress F6 until [CD/DVD Drive] is at the top of [Boot]menu.5Place the disc number one of the recovery CDs into theCD/DVD drive.6Press F10 .At the confirmation message, select [Yes] and press Enter . The computer will restart.<When the hard disk backup function has been enabled>When the message [The Backup function has been en-abled. If [Recovery] or [Erase HDD] is executed, theBackup function will be disabled, and your Backup datawill be lost.] appears, press Y .7Press 2 to execute [2. [Erase HDD]].(You can cancel this operation by pressing 0 .)<When the hard disk backup function has been enabled>When the message [The Backup function has been en-abled. If [Erase HDD] is executed, the Backup functionwill be disabled, and your Backup data will be lost.] ap-pears, press Y .When the message [Computer must be rebooted in orderto execute [Erase HDD.]] appears, press R .NOTEBe sure the AC adaptor is connected until the procedure is completed.This utility can only be used for internal hard disk. It cannot be used to erase data from external hard disks or the secondhard disk (optional).This utility cannot erase data from damaged disk.This utility cannot erase data for specific partitions.After executing this utility, the computer cannot be booted from the hard disk.The backup area and the data in the backup area will be erased.8At the confirmation message, press Y .9When [<<<Start Menu>>>] is displayed, press Enter .10The approximate time required for erasing data will bedisplayed.Press Space .11At the confirmation message, press Enter . Theoperation of erasing the hard disk starts.(If necessary, the “hard disk data erase” operation canbe cancelled after it has begun by pressing Ctrl + C .If the operation is cancelled before being completed, apart of data will not be erased.)12After the operation is complete:Under normal conditions, the message [Hard disk datahas been deleted.] will be displayed.If a problem occurred during the operation, an error mes-sage will be displayed.13Remove the recovery CD, and then press any key to turnoff the computer.
40AppendixSpecificationsModel No.CPUL2 (Second) Cache MemoryMemoryVideo MemoryLCD TypeDisplayed Colors*3External DisplayHard Disk DriveKeyboardFloppy Disk DriveSlot PC Card SlotAllowable current(total for two slots)RAM Module Slot*6Interface Parallel PortExternal Display PortSerial PortMicrophone Jack*7Headphone JackExternal Keyboard/Mouse PortExpansion Bus ConnectorUSB PortModemLANWireless LANExternal Antenna ConnectorPointing DeviceSound*11 MB = 1,024 bytes1 GB = 1,073,741,824 bytes*2A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video Memorycannot be set by the user.*3A 16,000,000 color display is achieved by using the dithering function.*4Maximum resolution depends on the specifications of the external display.*51GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB.*6Only a RAM card designed for PC2700 can be added.*7Use only a monaural condenser microphone.*8The settings for the K56flex modem need to be changed according to the AT command.Main SpecificationsCF-29ETKGZKM CF-29ETPGZKM CF-29E3KGZKMIntel® Pentium® M Processor 1.3 GHz LV1 MB*1256 MB*1 (768 MB*1 Max.) 512 MB*1 (1 GB*1Max.) 256 MB*1 (768 MB*1 Max.)UMA (64 MB*1 Max.)*265536/Approx. 16,000,000 colors (800 x 600 dots/1024 x 768 dots/1280 x 1024dots/1600 x 1200 dots)*440 GB*560 GB*540 GB*587 keys720 KB/1.44 MB (two-mode)Two Type I or Type II, or one Type III3.3 V: 400 mA5 V: 400 mA200 pin, 2.5 V, SO-DIMM, DDR SDRAM, PC2700 CompliantDsub 25-pin femaleMini Dsub 15-pin femaleDsub 9-pin maleMiniature jack, 3.5 DIAMiniature jack, 3.5 DIA, Impedance 32 Ω, Output Power 4 mW x 2Mini DIN 6-pin femaleDedicated 80-pin female4-pin, USB 2.0RJ-11 jack, Data: 56 kbps (V.92 & K56flex*8) FAX:14.4 kbpsRJ-45 jack, IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TXIEEE 802.11b/g compliant Frequency 2.4 GHz bandDedicated 50 Ω coaxial connectorTouch Pad Touch PadTouchscreen (Anti-Reflection, Stylus (included) touch capable)WAVE and MIDI playback, Monaural Speaker (built in)13.3 XGA type (TFT) with Touchscreen65536/Approx. 16,000,000 colors (800 x 600 dots/1024x 768 dots)13.3 XGA type (TFT)65536/Approx.16,000,000 colors (800 x600 dots/1024 x 768 dots)
41AppendixModel No.Battery PackOperating Time*9Charging Time*9Power OnPower OffClock BatteryAC Adaptor*12 InputOutputPower Consumption*13Environment In useTemperatureHumidityNot in use TemperatureHumidityPhysical Dimensions (W x H x D)Weight (including the carrying handle)SoftwareOperating SystemUtility ProgramsCF-29ETKGZKM CF-29ETPGZKM CF-29E3KGZKMLi-ion 11.1 V, 6.6 AhMain battery: Approx. 5 hours - 8.5 hours*10 (Approx. 7.5 hours*11)Main battery + Second battery: Approx. 8 hours - 14 hours*10 (Approx. 11 hours*11)Main battery: Approx. 7 hoursMain battery + Second battery: Approx. 11 hoursMain battery: Approx. 4 hoursMain battery + Second battery: Approx. 7 hoursCoin type lithium battery 3.0 V100 V - 240 V AC, 50 Hz/60 Hz15.6 V DC, 5.0 AApprox. 35 W*14 / Approx. 60 W (maximum when recharging in the ON state)5 °C to 35°C {41 °F to 95 °F}30% to 80% RH (No condensation)-20 °C to 60 °C {-4 °F to 140 °F}30% to 90% RH (No condensation)302 mm x 64.3 mm x 273 mm (excluding protrusion) {11.9 " x 2.6 " x 10.7 "}Approx. 3.62 kg {Approx. 7.98 lb.} Approx. 3.49 kg{Approx. 7.7 lb.}Main Specifications*9Varies depending on the usage conditions, CPU speed, etc.*10 Measured using BatteryMark™ Version 4.0.1 (LCD brightness: Maximum - Minimum)*11 Measured using MobileMark™ 2002 (LCD brightness: 60 cd/m2)*12 <Only for North America>The AC adaptor is compatible with power sources up to 240 V AC adaptor. The computer is supplied with a 125 V AC compatible AC cord.*13 Approx. 0.9 W when the battery pack is fully charged (or not being charged) and the computer is off.Approx. 1.5 W when the Wake up from LAN function has been enabled.*14 Rated power consumptionMicrosoft® Windows® XP Professional with Service Pack1a(NTFS File System)Setup UtilityDMI ViewerAdobe® Acrobat® ReaderPanasonic Hand WritingPC Information ViewerHard Disk Backup Utility*15Hard Disk Data Erase Utility*15Intel® PROSetIcon Enlarger*15 The Product Recovery CD-ROM is required.
42AppendixLIMITED WARRANTYPANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTYPanasonic Computer Solutions Company (referred to as “Panasonic”) will repair this product (other than software, which is covered by a separatewarranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in materialsor workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are covered for aperiod of one (1) year from the date of purchase.This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required beforewarranty performance is rendered.This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which occursin shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introductionof liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modification orservice by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God.Limits and Exclusions:There are no other express warranties except as listed below.PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THEUSE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDINGTHE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTYPERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how longan implied warranty lasts, so the above limitations or exclusions may not apply to you.This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your productdevelops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the problem is not handled to your satisfac-tion, then write to the Consumer Affairs Division at the address indicated below.SOFTWARE LIMITED WARRANTYPanasonic Computer Solutions Company (referred to as “Panasonic”) warrants to you only that the disk(s) or other media on which the Programs arefurnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof toyou, as evidenced by your purchase receipt.This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your require-ments or that the operation of the Programs will be uninterrupted or error free.Panasonic’s entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defectivedisk or other media which is returned to Panasonic’s Authorized Service Center, together with a copy of the purchase receipt, within the aforesaidwarranty period.Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which thePrograms are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media otherwisethan on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse, neglect, mishan-dling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is attributable to acts ofGod. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or attempted to modify anyProgram.DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS.PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION,ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEGLI-GENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF USEOF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT,FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, sothe above limitations or exclusions may not apply to you.This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules.* * *To obtain service or technical assistance within the continental U.S.A. and Alaska.DIAL TOLL FREE: 1-800-LAPTOP5Correspondence requesting product information should be sentto: Panasonic Computer Solutions Company,50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094For U.S.A.
43AppendixPANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTYCoverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, this computer product (excluding software media), whenpurchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the termsset forth below, during the period of warranty coverage specified.Remedy – In the event of a warranty claim, contact PCI’s representatives within the applicable warranty period, identifying the nature of the defectclaimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. – Fri. (excluding holidays) for instructions on how to obtainservice. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered bythis Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair issubject to the terms of this Limited Warranty for the balance of the original period of warranty coverage.No Coverage – This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects ina product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreignmatter into the product, alteration or servicing by anyone not authorized by PCI, or act of God.IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICECarefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability isassumed for loss or damage to the product while in transit, if you chose your own transportation carrier.SOFTWARE MEDIA LIMITED WARRANTYCoverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, that the disk(s) or other media on which software program(s)is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receiptas evidenced by your purchase receipt for your Panasonic Computer product.THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to thesoftware licensor’s written warranty (accompanying the copy of the software) for any software warranty claim.Claim Procedure – In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it,transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, at the above address, within the warranty period, togetherwith a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media.Remedy – PCI’s entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. Itdoes not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or consequential damages, or otherclaims, whether or not of similar character.No Coverage – This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmen-tal conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attemptedmodification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removablestorage media.GENERALNO OTHER WARRANTIES – PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFT-WARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES.NO LIABILITY FOR CONSEQUENTIAL DAMAGES – IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUEN-TIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THECOMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL.IN ANY EVENT, PCI’S MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THECOMPUTER PRODUCT.NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTIONAROSE.Statutory Warranties – Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.Scope of CoverageWhole Product (except Batteries), AC adaptor and CD-ROM(if factory installed)Batteries, CD-ROM (unless factory installed), Port Replicator,Extra Memory Modules and all other Peripherals, Options andAccessoriesPeriod of CoverageThree (3) Years from Date of OriginalEnd User Customer PurchaseOne (1) Year from Date of Original EndUser Customer PurchaseType of Failure CoverageDefective Materials or WorkmanshipDefective Materials or WorkmanshipFor Canada
Outline of the International ENERGY STAR® Office Equipment ProgramThe international ENERGY STAR® Office Equipment Program is an international programthat promotes energy saving through the use of computers and other office equipment.The program backs the development and dissemination of products with functions thateffectively reduce energy consumption. It is an open system in which business proprietorscan participate voluntarily. The targeted products are office equipment such as computers,displays, printers, facsimiles, and copiers. Their standards and logos are uniform amongparticipating nations.As an ENERGY STAR® Partner, Matsushita Electric Industrial Co., Ltd. hasdetermined that this product meets the ENERGY STAR® guidelines for energyefficiency.Panasonic Computer Solutions Company,50 Meadowlands Parkway, Panazip 2F-5,Secaucus, NJ 07094Panasonic Canada Inc.5770 Ambler Drive Mississauga,Ontario L4W 2T3© 2004 Matsushita Electric Industrial Co., LTD. All Rights Reserved.Printed in JapanFJ0504-0DFQX5453ZA
ADDENDUM External antenna cannot exceed recommended maximum antenna gain as described below. Maximum External Antenna Gain Module Band Gain (dBi) WLAN 2.4GHz 12.5 Cellular 3.75 GPRS PCS 4.15 Cellular 13.35 CDMA PCS 11.5

Navigation menu