Panasonic of North America 9TGCF-733 Panasonic Toughbook w/ Intel WLAN & Alps Bluetooth User Manual Operating Instructions

Panasonic Corporation of North America Panasonic Toughbook w/ Intel WLAN & Alps Bluetooth Operating Instructions

Contents

Users Manual Part 1

OPERATING INSTRUCTIONSPersonal Computer®AppendixLIMITED USE LICENSE AGREEMENT ........ 29Hard Disk Data Erase Utility .......................... 31WinDVD™ ..................................................... 32Names and Functions of Parts ...................... 34Specifications ................................................ 36LIMITED WARRANTY ................................... 38TroubleshootingList of Error Codes ......................................... 21Dealing with Problems (Summary) ....................... 23Reinstalling Software .................................... 27OperationStarting Up/Shutting Down ............................ 16Touch Pad ..................................................... 19Reference Manual ......................................... 20Getting StartedRead Me First.................................................. 3First-time Operation ...................................... 11Contents[Additional Manual]Reference ManualThis manual can be accessed on your computer.  Referto page 20 on how to access the Reference Manual.Reference Manual•Read Me First •LED Indicators•Key CombinationsReference Manual•Touch Pad•Touchscreen*•Standby/HibernationFunctions•Security Measures•Computing on the Road•Battery Power•Multimedia Pocket•CD Drive•PC Cards•RAM Module•Port Replicator•Printer•External Display•USB Devices•Modem•LAN•Wireless LAN•Hard Disk Drive•Setup Utility*Only for models withtouchscreenReference Manual•Technical Information•DMI Viewer•List of Error Codes•Dealing with Problems(Advanced)Model No.  CF-73 Series2000Please read these instructions carefully before using this product and save this manual for future use.XPGetting StartedAppendix OperationTroubleshooting
2Getting StartedIntroductionThank you for purchasing the Panasonic computer.  Read the operating instructions thoroughly for proper operation of your newcomputer.Illustrations and Terminology in this ManualCopyrightThis manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved.  No part of this manual may bereproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.No patent liability is assumed with respect to the use of the information contained herein.©2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.DisclaimerComputer specifications and manuals are subject to change without notice.  Matsushita Electric Industrial Co., Ltd. assumes noliability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.TrademarksMicrosoft, Windows, Windows NT and the Windows logo are registered trademarks of Microsoft Corporation of the United Statesand/or other countries.Intel, Pentium and SpeedStep are either registered trademarks or trademarks of Intel Corporation.Adobe® and Acrobat® are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/orother countries.WinDVD™ is a trademark of InterVideo, Inc.Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.NOTE:NOTE provides a useful fact or helpful information.CAUTION:CAUTION indicates a condition that may result in minor or moderate injury.WARNING:WARNING indicates a hazard that may result in moderate or serious injury.Windows 2000 : Information for Microsoft® Windows® 2000 Professional users.Windows XP : Information for Microsoft® Windows® XP Professional users.Enter   : This illustration means to press the [Enter] key.Fn   +   F5   : This illustration means to press and hold the [Fn] key,  then press the [F5] key.[Start] - [Run]: This illustration means to click [Start], then to click [Run].(For some applications, you may need to double-click.) :Where to go for referred information.  : This illustration means to refer to the Reference Manual, which is available on your computer.Refer to page 20 on how to access this manual.Windows 2000 screens are used in this manual when no specific OS notes are required.Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanationeasier to understand.Circular media such as DVD-ROM and CD-ROM are described as “discs”.The following drives are described as “CD drive”.DVD-ROM drive, DVD-ROM & CD-R/RW driveThis manual covers two types of models, as distinguished by the type of display (models with touchscreen and modelswithout touchscreen).If the user has logged on without the administrator authority, some functions may not be executable, and some screensmay not be displayed as shown in this manual.  If this happens, log on with the administrator authority to enable thesefunctions.Confirm the latest information on optional products in catalogs, etc.Customer’s RecordSerial No.orDate of PurchaseModel No. *Code No.Dealer’s NameDealer’s Address* For the Model No., insert the 12 digit number (for example, CF-73E3KVXDM) located onthe bottom of the computer.
3Getting StartedRead Me FirstFederal Communications Commission RadioFrequency Interference StatementNote: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of theFCC Rules.  These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation.  This equipment generates, uses and can radiateradio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interferenceto radio communications.  However, there is no guarantee thatinterference will not occur in a particular installation.  If thisequipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.Consult the Panasonic Service Center or an experienced ra-dio/TV technician for help.WarningTo assure continued compliance, use only shielded interfacecables when connecting to a computer or peripheral.  Also, anychanges or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate this equipment.FCC RF Exposure Warning: This computer is provided withPC Card slots that could be used with wireless transmitter(s),which will be specifically recommended, when they becomeavailable. Other third-party wireless transmitter(s) have not beenRF exposure evaluated for use with this computer and may notcomply with FCC RF exposure requirements.This device complies with Part 15 of the FCC Rules.  Operationis subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Responsible Party: Matsushita Electric Corporation of AmericaOne Panasonic WaySecaucus, NJ 07094Tel No:1-800-LAPTOP-5 (1-800-527-8675)IMPORTANT NOTE: To comply with FCC RF exposurecompliance requirements, the antenna used for this transmittermust be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating inconjunction with any other antenna or transmitter.For U.S.A.FCC Regulation Notice for modemThis equipment contains a FCC approved modem.Manufacturer of modem: PC TEL Inc.Model No. PCT2304WTFOR HOME OR OFFICE USETested To ComplyWith FCC Standards1. This equipment complies with CFR47 Part 68 rules. On thecomputer is a label that contains, among other information,the FCC registration number and ringer equivalence number(REN) for this equipment. If required, this information mustbe provided to the telephone company.2. An FCC compliant telephone cord and modular plug is pro-vided with this equipment. This equipment is designed to beconnected to the telephone network or premises wiring us-ing a compatible modular jack which is Part 68 compliant.See Installation Instructions for details.3. The REN is used to determine the quantity of devices whichmay be connected to the telephone line. Excessive RENs on thetelephone line may result in the devices not ringing in responseto an incoming call. In most, but not all area, the sum of RENsshould not exceed five (5.0). To be certain of the number ofdevices that may be connected to a line, as determined by thetotal RENs, contact the local telephone company.4. If your telephone equipment cause harm to the telephonenetwork, the telephone company will notify you in advicethat temporary discontinuance of service may be required.But if advice notice isn’t practical, the telephone companywill notify the customer as soon as possible. Also, you willbe advised of your right to file a complaint with the FCC ifyou believe it is necessary.5. The telephone company may take changes in it’s facilities,equipment, operations or procedures that could affect the op-eration of the equipment. If this happens the telephone com-pany will provide advance notice in order for you to makenecessary modifications to maintain uninterrupted service.6. If trouble is experienced with this equipment, for repair orwarranty information, please contact Matsushita ElectricCorporation of America at DIAL TOLL FREE 1-800-LAP-TOP5 (1-800-527-8675). If the equipment is causing harm tothe telephone network, the telephone company may requestthat you disconnect the equipment until the problem is resolved.7. There are no user serviceable parts contained in this equip-ment.8. This equipment may not be used on coin service providedby the telephone company. Connection to party lines is sub-ject to state tariffs.9. The Telephone Consumer Protection Act of 1991 makes itunlawful for any person to use a computer or other electronicdevice to send any message via a telephone fax machine un-less such message clearly contains in a margin at the top orbottom of each transmitted page or on the first page of thetransmission, the date and time it is sent and an identificationof the business or other entry, or other individual sending themessage and the telephone number of the sending machine orsuch business, other entity, or individual. In order to programthis information into your fax software, you should refer tothe manual of the Fax software being used.
4Getting StartedRead Me FirstFor CanadaIndustry Canada (IC) Notice for modemThis equipment contains an Industry Canada approved modem unit.The Industry Canada label is affixed on the modem unit.EQUIPMENT ATTACHMENT LIMITATIONS“NOTICE: The Industry Canada label identifies certifiedequipment. This certification means that the equipment meetstelecommunications network protective, operational andsafety requirements as prescribed in the appropriate TerminalEquipment Technical Requirements document(s). TheDepartment does not guarantee the equipment will operateto the user’s satisfaction.Before installing this equipment, users should ensure that it ispermissible to be connected to the facilities of the localtelecommunications company. The equipment must also beinstalled using an acceptable method of connection. The customershould be aware that compliance with the above conditions maynot prevent degradation of service in some situations.Repairs to certified equipment should be coordinated by arepresentative designated by the supplier. Any repairs oralterations made by the user to this equipment, or equipmentmalfunctions, may give the telecommunications companycause to request the user to disconnect the equipment.Users should ensure for their own protection that the electricalground connections of the power utility, telephone lines andinternal metallic water pipe system, if present, are connectedtogether. This precaution may be particularly important in ruralareas. Caution: Users should not attempt to make suchconnections themselves, but should contact the appropriateelectric inspection authority, or electrician, as appropriate.”“NOTICE: The Ringer Equivalence Number (REN) assignedto each terminal device provides an indication of themaximum number of terminals allowed to be connected to atelephone interface. The termination on an interface mayconsist of any combination of devices subject only to therequirement that the sum of the Ringer Equivalence Numbersof all the devices does not exceed 5.”REN: See bottom of the computerRESTRICTIONS CONCERNANT LE RACCORDEMENTDE MATÉRIEL“AVIS: L’étiquette d’Industrie Canada identifie le matérielhomologué. Cette étiquette certifie que le matériel estconforme aux normes de protection, d’exploitation et desécurité des réseaux de télécommunications, comme leprescrivent les documents concernant les exigencestechniques relatives au matériel terminal. Le Ministèren’assure toutefois pas que le matériel fonctionnera à lasatisfaction de l’utilisateur.Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’ilest permis de le raccorder aux installations de l’entrepriselocale de télécommunication. Le matériel doit également êtreinstallé en suivant une méthode acceptée de raccordement.L’abonné ne doit pas oublier qu’il est possible que laconformité aux conditions énoncées ci-dessus n’empêchepas la dégradation du service dans certaines situations.Les réparations de matériel homologué doivent êtrecoordonnées par un représentant désigné par le fournisseur.L’entreprise de télécommunications peut demander àl’utilisateur de débrancher un appareil à la suite deréparations ou de modifications effectuées par l’utilisateurou à cause de mauvais fonctionnement.Pour sa propre protection, l’utilisateur doit s’assurer que tousles fils de mise à la terre de la source d’énergie électrique,des lignes téléphoniques et des canalisations d’eaumétalliques, s’il y en a, sont raccordés ensemble. Cetteprécaution est particulièrement importante dans les régionsrurales. Avertissement: L’utilisateur ne doit pas tenter de faireces raccordements lui-même; il doit avoir recours à un serviced’inspection des installations électriques, ou à un électricien,selon le cas.”“AVIS: L’indice d’équivalence de la sonnerie (IES) assignéà chaque dispositif terminal indique le nombre maximal determinaux qui peuvent être raccordés à une interface. Laterminaison d’une interface téléphonique peut consister enune combinaison de quelques dispositifs, à la seule conditionque la somme d’indices d’équivalence de la sonnerie de toutsles dispositifs n’excède pas 5.”IES: Voir sous le fond de l’ordinateur10.According to the FCC’s electrical safety advisory, we recom-mend that you may install an AC surge arrestor in the ACoutlet to which this equipment is connected. Telephone com-panies report that electrical surges, typically lightning tran-sients, are very destructive to customer terminal equipmentconnected to AC power sources and that this is a major na-tionwide problem.“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecom-munication line cord.”“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement desconducteurs de télécommunications 26 AWG ou de section supérieure.”Notice for the products using LCDThis product uses one or more fluorescent lamps containing asmall amount of mercury. It also contains lead in some compo-nents. Disposal of these materials may be regulated in your com-munity due to environmental considerations.  For disposal orrecycling information please contact your local authorities, orthe Electronics Industries Alliance: <http://www.eiae.org/>Industry CanadaThis product complies with RSS210 Industry Canada.Operation is subject to the following two conditions;(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.
5Getting StartedImportant Safety Instructions / Importantes Mesures De SécuritéWhen using your telephone equipment, basic safety precau-tions should always be followed to reduce the risk of fire,electric shock and injury to persons, including the following:1.Do not use this product near water, for example, near abath tub, wash bowl, kitchen sink or laundry tub, in a wetbasement or near a swimming pool.2.Avoid using a telephone (other than a cordless type) dur-ing an electrical storm. There may be a remote risk ofelectric shock from lightning.3.Do not use the telephone to report a gas leak in the vicin-ity of the leak.4.Use only the power cord and batteries indicated in thismanual. Do not dispose of batteries in a fire. They mayexplode. Check with local codes for possible special dis-posal instructions.SAVE THESE INSTRUCTIONSCertaines mesures de sécurité doivent être prises pendantl’utilisation de matérial téléphonique afin de réduire lesrisques d’incendie, de choc électrique et de blessures. Envoici quelquesunes:1.Ne pas utiliser l’appareil près de l’eau, p.ex., près d’unebaignoire, d’un lavabo, d’un évier de cuisine, d’un bac àlaver, dans un sous-sol humide ou près d’une piscine.2.Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareilsans fil) pendant un orage électrique. Ceci peut présenterun risque de choc électrique causé par la foudre.3.Ne pas utiliser l’appareil téléphonique pour signaler unefuite de gaz s’il est situé près de la fuite.4.Utiliser seulement le cordon d’alimentation et le type depiles indiqués dans ce manual. Ne pas jeter les piles dansle feu: elles peuvent exploser. Se conformer aux règlementspertinents quant à l’élimination des piles.CONSERVER CES INSTRUCTIONSInformation to the UserThis product and your HealthThis product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this producthowever is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe thisproduct is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and resultfrom deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsiblerepresentatives of the organization. These situations may for example include:Using this product on board of airplanes, orIn any other environment where the risk of interference to other devices or services is perceived or identified as harmful.If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports),you are encouraged to ask for authorization to use this product prior to turning on the product.Regulatory InformationWe are not responsible for any radio or television interference caused by unauthorized modification of this product. The correctionof interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers ordistributors are not liable for damage or violation of government regulations that may arise from failing to comply with theseguidelines.
6Getting StartedInformations destinées à l’utilisateurCet appareil et votre santéCet appareil, comme les autres dispositifs radio, émet une énergie électromagnétique de fréquence radio. Le niveau d’énergieémis par cet appareil est cependant bien inférieur à l’énergie électromagnétique émise par certains dispositifs sans fil comme,par exemple, les téléphones portables.Cet appareil fonctionnant dans les limites des directives concernant les normes et recommandations de sécurité des fréquencesradio, nous pensons que l’utilisation de cet appareil ne pose aucun risque pour les consommateurs. Ces normes et recommandationsreflètent le consensus de la communauté scientifique et découlent des délibérations de commissions et comités de scientifiquesqui examinent continuellement et interprètent les documents de travaux approfondis. Dans certaines situations ou certainslieux, l’utilisation de cet appareil peut être restreinte par le propriétaire du bâtiment ou les responsables de l’organisation. Parexemple, ces situations peuvent inclure :L’utilisation de cet appareil à bord d’un avion, ouDans un autre milieu où le risque d’interférence avec d’autres dispositifs ou services est perçu ou identifié comme nuisible.Si vous n’êtes pas sûr de la politique qui s’applique à l’utilisation de dispositifs sans fil dans une organisation ou lieu spécifique(un aéroport, par exemple), il est conseillé de demander l’autorisation d’utiliser cet appareil avant de le mettre sous tension.Informations sur la réglementationNous ne serons pas tenus responsables de parasites radioélectriques ou de télévision provoqués par une modification nonautorisée de cet appareil. La rectification des parasites provoqués par une telle modification non autorisée sera la responsabilitéde l’utilisateur. Nous, et les revendeurs ou distributeurs mandatés de l’appareil ne seront pas tenus responsables de dommagesou violations de règlements gouvernementaux qui peuvent se produire du fait du non respect de ces directives.Read Me First
7Getting StartedPrecautionsLithium BatteryAvoid Extreme Heat and ColdDo not store or use the computer in locationsexposed to heat, direct sunlight, or extreme cold.Avoid moving the computer between locations withlarge temperature difference.Operation: 5 oC to 35 oC {41 oF to 95 oF}Storage: -20 oC to 60 oC {-4 oF to 140 oF}Avoid Direct Sunlight on the LCD PanelThe LCD panel should not be exposed to directsunlight or ultraviolet light.Avoid Humidity, Liquids and DustDo not store or use the computer in locations exposedto high humidity, liquids (including rain) or dust.Prevent ShockAvoid subjecting the computer to severe vibrations orimpact.  Do not place the computer inside a car trunk.Avoid Radio Frequency InterferenceDo not place the computer near a television or ra-dio receiver.Avoiding low-temperature burnsAvoid more than casual contact with any heat pro-ducing area of  the notebook computer, AC adap-tor, and any option or accessory you use with it.Even low heat, if warmer than body temperature,can cause a burn, if the skin is exposed to the heatsource for a long enough period of time.UsageHandlingAvoid Magnetic FieldsKeep the computer away from magnets.Data stored on the hard disk may be lost.Avoid StackingDo not place heavy objects on top of the computer.Keep Small Objects AwayDo not insert paper clips or other small objects intothe computer.Do Not Disassemble the ComputerDo not attempt to disassemble your computer.Avoid Excessive Force on the DisplayDo not apply excessive downward force on thedisplay when it is completely opened, especiallywhen plugs and/or cables are connected to the rearof the computer.Lithium Battery!This computer contains a lithium battery to enable the date, time,and other data to be stored. The battery should only be exchangedby authorized service personnel.Warning! A risk of explosion from incorrect installation or mis-application may possibly occur.Pile au lithium!Le micro-ordinateur renferme une pile au lithium qui permet desauvegarder certaines données comme la date et l’heurenotamment. Elle ne devra être remplacée que par un technicienqualifié.Avertissement! Risque d’explosion en cas de non respect decette mise en garde!CD Drive CautionCAUTION!THIS PRODUCT UTILIZES A LASER.USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OFPROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAYRESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.REFER SERVICING TO QUALIFIED PERSONNELAVERTISSEMENT!CET APPAREIL UTILISE UN LASER.L’UTILISATION DE COMMANDES OU DE RÉGLAGES OUL’EXÉCUTION DE PROCÉDURES AUTRES QUE CELLESSPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSITION ÀDES RADIATIONS DANGEREUSES.NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARERSOI-MÊME.CONFIER TOUT TRAVAIL D'ENTRETIEN À UN PERSONNELQUALIFIÉ.BottomCLASS 1 LASER PRODUCTLASER KLASSE1This computer has been designed so as to minimize shock tothe LCD and hard disk drive, the leakage of liquid (e.g., water)on to the keyboard, etc., but no warranty is provided againstsuch trouble.  Therefore, as a precision instrument, be extremelycareful in the handling.Before putting the computer away, be sure to wipe off anymoisture.Laser safety information is appropriate only when drive with laser isinstalled.Les mesures de sécurité relatives au laser ne s’appliquent que lors del’installation d’une unité avec laser.
8Getting StartedPrecautions (Battery Pack)NOTEThe battery pack may become warm during rechargingor normal use.  This is completely normal.Recharging will not commence outside of the allowabletemperature range (0 °C to 50 °C {32 °F to 131 °F}).(    “Battery Power”)  Once the allowable rangerequirement is satisfied, charging begins automatically.Note that the recharging time varies based on the usageconditions. (Recharging takes longer than usual whenthe temperature is 10 °C {50 °F} or less.)If the temperature is low, the operating time is short-ened.  Only use the computer within the allowable tem-perature range.This computer has a high temperature mode functionthat prevents the degradation of the main battery in hightemperature environments.  If the high temperature modeis enabled in the Setup Utility (   “Setup Util-ity”), a level of 100% in the [High Temperature] modeis about a level of 80% in the [Normal Temperature]mode.The battery pack is a consumable item.  If the amount oftime the computer can be run off a particular battery packbecomes dramatically shorter and repeated rechargingdoes not restore its performance, the battery pack shouldbe replaced with a new one.When transporting a spare battery inside a package, brief-case, etc., it is recommended that it be placed in a plasticbag so that its contacts are protected.Always power off the computer when it is not in use.Leaving the computer on when the AC adaptor is notconnected will exhaust the remaining battery capacity.Care should be exercised with regard to the following inorder to avoid the possibility of overheating, fire or damage.Avoid HeatDo not throw the battery pack into a fire or ex-pose it to excessive heat.Keep Articles AwayDo not place the battery pack together with articlessuch as necklaces or hairpins when carrying or stor-ing.Do Not DisassembleDo not insert sharp objects into the battery pack,expose it to bumps or shocks, deform, disassemble,or modify it.Do Not ShortDo not short the positive (+) and negative (-) con-tacts.Avoid Extreme Heat, Cold and Direct SunlightDo not charge, use or leave the battery pack forextended periods where it will be exposed to di-rect sunlight, in a hot place (in a car on a sunnyday, for example), or in a cold place.Do Not Use With Any Other ComputerThe battery pack is rechargeable and was intendedfor the specified computer.  Do not use it with acomputer other than the one for which it was de-signed.Do Not Put into a MicrowaveDo not put the battery pack into a microwave ovenor a pressurized chamber.Stop UsingShould the battery emit an abnormal odor, becomehot to the touch, become discolored, change shape,or become in any way different from normal, re-move it from the computer and stop using it.If the battery pack will not be used for a long period of time(a month or more), charge or discharge (use) the battery packuntil the remaining battery level becomes 30% to 40% andstore it in a cool, dry place.This computer prevents overcharging of the battery by re-charging only when the remaining power is less than approx.95% of capacity.The battery pack is not charged when the computer is firstpurchased.  Be sure to charge it before using it for the firsttime.  When the AC adaptor is connected to the computer,charging begins automatically.Should the battery leak and the fluid get into your eyes, do notrub your eyes.  Immediately flush your eyes with clear waterand see a doctor for medical treatment as soon as possible.Do not touch the terminals on the battery pack.  The batterypack may no longer function properly if the contacts are dirtyor damaged.Do not expose the battery pack to water, or allow it to be-come wet.Read Me FirstCablesUse of an interface cable longer than 3 m (9.84 feet) is notrecommended.PeripheralsIncorrectly using peripheral devices may lead to a decrease inperformance, an increase in temperature and/or damage yourcomputer.  For more information on peripheral devices, refer tothe Reference Manual.
9Getting StartedWhen Using Peripheral DevicesPay strict attention to the following points to avoid damage to the computer, peripheral devices, cables, etc.Also, in addition to following this manual and the Reference Manual, carefully read the instruction manuals forthe peripheral devices being used.Use only peripheral devices that conform to the computer’s specifications.Connect the devices properly, paying close attention to the condition and position of the connectors.If a connection cannot be made easily, do not apply undue force; check once more to confirm the conditionand position of the connector (alignment of pins, etc.) .If the connector has holding screws, fasten the screws firmly.Do not carry the computer with cables attached, and do not pull on the cables forcefully.Saving Data on the Hard DiskHard Disk LockWhen the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the harddisk is installed in a different computer, since a password is also set for the hard disk. When the hard disk isreturned to the original computer, you can read/write data as before.  In this case, however, make the settings in theSetup Utility exactly the same as they were before the hard disk was removed.  (Note that this Hard Disk Lockdoes not guarantee the complete protection of data.     “Security Measures”)When Disposing of or Transferring Ownership of This DeviceWhen disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent thetheft of hard disk data. Even if you delete data or initialize the hard disk through normal Windows commands, datacan still be read using special software. In order to erase all data, either have the data erased by a specialist (at acharge) or use the hard disk data erase utility (included) (  page 31).  (Note that this hard disk data erase utilitydoes not guarantee that data will be completely erased.)Also, note that if you transfer ownership of this device without deleting commercial software that you haveinstalled to the hard disk, you may be in violation of the licensing agreement for that software.Do not expose your computer to shock.Use care when handling your computer, shock may damage your hard disk or make your software applica-tions and data unusable.Do not power off your computer while software applications are running or hard disk drive indicator ( ) is on.Properly shut Windows* down to avoid problems.Save all valuable data to disks.Backing up data to disks will limit damage should trouble occur to your computer or should you inadvert-ently change or erase data.Use the security function for all important data.  (   “Security Measures”)*Windows 2000 : This computer uses Microsoft® Windows® 2000 Professional.Windows XP : This computer uses Microsoft® Windows® XP Professional.Users are advised to purchase the latest versions of virus protection software and use them regularly.We recommend you run the software:• After booting your computer.• After receiving data.We recommend that you check data received on disks or from external sources, such as data downloaded fromthe Internet, e-mail, etc.  (For compressed files, uncompress them before running a check).Computer VirusesWireless LANTo prevent theft of data or unauthorized access to the hard disk via a wireless LANIf you plan to use wireless LAN functions, we recommend that you do so only after making the appropriatesecurity settings, such as for data encryption.
10Getting StartedHandlingTouch Pad page 19Display<Models with touchscreen>Use the soft cloth included with the computer. (For more information, refer to “SuggestionsAbout Cleaning the LCD Surface” that comes with the soft cloth.)<Models without touchscreen>Avoid using water when cleaning the panel. Ingredients included in water may leave scratchesand reduce readability of the screen.<When cleaning dust/dirt>Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen.Sweep dust/dirt with fine brush, then wipe it with a dry soft cloth used for cleaning glasses.<When cleaning oily surface>Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with adry soft cloth used for cleaning glasses.Do not use benzene, thinner, or rubbing alcohol.  Doing so may adversely affect the surface, e.g., discoloration.  In addition, donot use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.Do not directly add or spray water or detergent.  If liquid enters the inside of the computer, it may cause it to work improp-erly or be damaged.CAUTIONMaintenanceDo not drop or hit your computer against solid objects.Do not carry your computer when it is on.Remove all external devices, cables, and PC Cards sticking out of the computer (see thefigure on the left) before transporting the computer.We recommend preparing a fully charged battery.When transporting a spare battery inside a package, briefcase, etc., it is recommended that itbe placed in a plastic bag so that its contacts are protected.Do not carry the computer while the display is open, or carry it by gripping the display.Do not put anything (e.g., a piece of paper) between the display and keyboard.Always carry your computer with you.  Never check it in with luggage.  For use of the com-puter inside an aircraft, we recommend asking the airlines regarding their policy on this issue.It is a good idea to make backup copies on disks and carry them with you.Do not leave a disk in the drive while transporting your computer.Areas excluding the displayWipe these areas with a soft cloth, after applying water or detergent diluted with water to thesoft cloth and firmly wringing out excess water.EnvironmentPlace the computer on a flat stable surface. Do not place the computer upright or allow it to tip over.When the computer receives extremely strong shock after falling, the hard disk may become inoperable.In use: Temperature: 5 °C to 35 °C  {41 °F to 95 °F}Humidity     : 30% to 80% RH  (No condensation)Not in use: Temperature: -20 °C to 60 °C  {-4 °F to 140 °F}Humidity     : 30% to 90% RH  (No condensation) Places not to use your computerSuch areas may result in damage to the computer.Areas with electronic equipmentThese areas may interfere with your display or cause your computer to produce strange sounds.Areas with extremely high/low temperaturesDo not leave things near the computer that are sensitive to heat.  During operation, the computer maybecome warm.Usage EnvironmentRead Me First
11Getting Started<Model with a DVD-ROM Drive>WinDVD™ CD-ROM ( page 32) .....................................................1<Model with a DVD-ROM & CD-R/RW Drive>WinDVD™ CD-ROM ( page 32) .....................................................1B’s Recorder/B’s CLiP CD-ROM .........................................................1B’s Recorder/B’s CLiP Booklet ...........................................................1Read the steps below to help you learn what parts are included, and to gain an understanding ofsome basic computer-related operations.1Confirm the inclusion of all partsMake sure the parts shown in the figure have been supplied.  If any of these items aremissing or is not working properly, contact Panasonic Technical Support.Be sure the battery pack is properly connected to the connector.Do not touch the terminals on the battery pack and the computer.  The batterypack may no longer function properly if the contacts are dirty or damaged.  Also,the computer may not operate properly.Before using the battery pack, carefully read “Precautions (Battery Pack)”( page 8).2Read the LIMITED USE LICENSE AGREEMENT ( page 29)Before removing the seal covering the power switch, read the LIMITED USE LI-CENSE AGREEMENT.3Turn the computer over and insert the battery pack1Slide the right latch to the unlock position ( ).2Make sure the battery pack is facing the correct direction, slide it in the directionof the arrow.3Slide the right latch to the lock position ( ), and then check to ensure that thebattery pack is held firmly.(Left latch is locked automatically.)Model No: CF-AA1653AAC Adaptor ........... 1Model No: CF-VZSU26AC Cord ................1 Battery Pack........1Modem TelephoneCable ..................... 1 Product Recovery CD-ROMAC Adaptor ........... 1 AC Cord ................1 Battery Pack........1Windows XPWindows 2000Battery PackLatchOperating Instructions (This book)...1 Windows Book ........................ 1312First-time OperationCAUTIONSoft Cloth ................................... 1(    “Touchscreen”)Stylus .........................................1<Only for models with touchscreen>
12Getting StartedConnect your computer to a power outletCAUTIONBe sure the AC adaptor is connected until completing Step 7.When using the computer for the first time, do not connect any peripheral de-vice except the battery pack and AC adaptor to the computer.Handling the AC adaptorDo not twist or pull the AC power cord forcefully.  Doing so may damage theconnections.Use only the specified AC adaptor with your computer.  Using an AC adaptorother than the one supplied might damage the battery and/or the computer.When the DC plug is not connected to the computer, disconnect the AC cordfrom your AC wall outlet.Problems such as sudden voltage drops may arise during periods of thunder andlightning.  Since this could adversely affect your computer, an uninterruptiblepower source (UPS) is highly recommended unless running from the batterypack alone.45Open the display1Pull the carrying handle forward.2Lift up the latch.3Lift open the display.CAUTION6Turn your computer onPress the power switch and hold it for approximately one second until the power indi-cator turns on before releasing it.Do not press the power switch and hold it for more than four seconds; this willcause the power to be turned off forcibly.Do not press the power switch repeatedly.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.7Setup WindowsMoving the cursor ( ) or clicking buttons can be performed with the touch pad( page 19).Do not press any key or move the touch pad until [Windows 2000 ProfessionalSetup] is displayed.CAUTIONWindows 20001At the [Welcome to the Windows 2000 Setup Wizard], select [Next].2After reading the agreement, select [I accept this agreement] or [I don’t accept thisagreement], then select [Next]. If [I don’t accept this agreement] is selected, the Windows setup will be aborted.NOTEFirst-time OperationThe battery pack will be charged automatically.Charging Time: Approx. 3 hours(Varies depending on the usage conditions.)321LatchDC-IN JackDC IN 15.1-16.0 VPowerSwitch PowerIndicator
13Getting Started6Enter the correct date, time and the time zone, then select [Next].7At [Networking Settings], select [Typical settings], then select [Next].8At [Workgroup or Computer Domain], select [No, this computer is not on anetwork, or is on a network without a domain], then select [Next].The computer will restart.9At [Welcome to the Network Identification Wizard], select [Next].10At [Users of This Computer], select [Users must enter a user name and pass-word to use this computer], then select [Next].11Select [Finish].12Enter your administrator password and select [OK].<Only for models with touchscreen>If the cursor can not be pointed correctly with the stylus, perform [Calibration] in[Start] - [Settings] - [Control Panel] - [Touch Panel].Do not press any key or move the touch pad until [Windows XP ProfessionalSetup] is displayed.CAUTIONWindows XPCAUTIONRemember this password!  If the password is forgotten, Windows cannot beoperated. You can create a password reset disk beforehand (  page 15).3Select settings for your region, then select [Next].4Enter your name and organization and then select [Next].5Enter your computer name and administrator password and then select [Next].1At [Welcome to the Windows XP Setup Wizard], select [Next].2After reading the agreement, select [I accept this agreement] or [I don’t accept thisagreement], then select [Next].NOTE If [I don’t accept this agreement] is selected, the Windows setup will be aborted.Remember this password!  If the password is forgotten, Windows cannot beoperated.CAUTION6Enter the correct date, time and the time zone, then select [Next].7At [Networking Settings], select [Typical settings], then select [Next].It may take about 2 - 3 minutes until the next screen is displayed. Wait, and donot press any keys, or touch the touch pad, etc.NOTE3Select settings for your region, then select [Next].4Enter your name and organization and then select [Next].5Enter your computer name and administrator password and then select [Next].
14Getting Started3Prepare 2HD floppy disks and make sure they are not in the write-protected state, andthen set it.Follow the on-screen instructions.4Place a label identifying the contents on each disk.Name of created backup diskFIRSTAID FD (When the display for creating the UPDATE FD is shown, create thedisk by following the on-screen instructions.)CAUTIONStore the floppy disks in a safe place. They will enable you to return your computerto the condition at the time of purchase should any problems occur.When creating backup disks, do not run any other application program.When creating backup disks and the message [Insufficient files to copy] is dis-played, select [OK] and then contact Panasonic Technical Support.While the floppy disk drive indicator is on, do not remove the floppy disk, poweroff your computer or use the standby or hibernation function (   “Standby/Hibernation Functions”).<When [You do not need to make “BACKUP DISK”] is not displayed (proce-dure  1  above)>Be sure to create the backup disk.If a backup disk is not created, it will be impossible to return the computer to itsoriginal state. In this case, contact Panasonic Technical Support.The floppy disk drive must be the A drive.NOTEUSB FloppyDisk DriveLabel on the top surface,and insert the shutter-side headfirst.Create Backup Disks for Reinstallation1Windows 2000Select [Start] - [Programs] - [Panasonic] - [Create Backup Disk].Windows XPSelect [Start] - [All Programs] - [Panasonic] - [Create Backup Disk].When [You do not need to make “BACKUP DISK”] is displayed, there is no need tocreate a backup disk.  If this message is not displayed, create backup disks for reinstal-lation.To create backup disks, the USB floppy disk drive (optional: CF-VFDU03) and format-ted 2HD floppy disks are needed.2Connect the USB floppy disk drive to your computer.First-time OperationThis concludes the first-time use operation guidelines.NOTEIf [Windows XP is currently configured to manage the Intel(R) PRO/WirelessLAN adaptor.] is displayed, select [Yes].8At [Workgroup or Computer Domain], select [No, this computer is not on anetwork, or is on a network without a domain], then select [Next].The computer will restart.9Enter your administrator password and select  .<Only for models with touchscreen>If the cursor can not be pointed correctly with the stylus, perform [Calibration] in[Start] - [Control Panel] - [Other Control Panel Options] - [Touch Panel].
15Getting StartedDepending on the Windows settings, installed applications, and drivers, menus andother displays may differ, or some functions (such as use of the password reset disk)may be inoperable.You can select Classic view for the Control Panel or select the Classic Start menu.You can also change the way a user logs on or off.The procedure in this manual uses the method or view of the Windows XP defaultsetting (not Classic view or Classic Start menu etc.).Resetting the passwordWindows XP has a function to reset a forgotten password.To use this function, you need to create a password reset disk beforehand followingthe steps below.1Connect the USB floppy disk drive (optional: CF-VFDU03) to your computer.2Select [Start] - [Control Panel] - [User Accounts] and select the account you usedto logon.3Select [Prevent a forgotten password] from the [Related Tasks] menu and create apassword reset disk following the on-screen instructions.Store the password reset disk in a safe place.·Only the logon password for each account can be reset.The password set in the Setup Utility cannot be reset.When you create the first new account, you can only select [Computer administrator].Only the added user account will be displayed in the Welcome screen.  The account forthe administrator created during Windows setup (when the computer is started up forthe first time) will not be displayed.Information for Windows XP
16OperationStarting Up/Shutting DownStarting UpPower Switch PowerIndicator 2Turn your computer onPress the power switch and hold it for approximately one second until the power indi-cator turns on before releasing it.CAUTIONWhile booting, avoid the following until the hard disk drive indicator ( ) hasturned off.• Connecting or disconnecting the AC adaptor.• Touching the power switch.• Performing any keyboard, touch pad, touchscreen (only for models withtouchscreen) or external mouse operations.• Closing the display.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.When the CPU temperature rises, the computer may not power on to preventthe CPU from overheating.  Should this happen, allow the computer to cooldown then switch the power on again.If the computer still does not power on, contact Panasonic Technical Support.321Latch 1Open the display1Pull the carrying handle forward.2Lift up the latch.3Lift open the display.You may encounter the following situations when the computer is turned on atvery low temperatures.  These functions are designed to prevent hard disk drivemalfunctions that may occur at low temperatures.The message “Warming up the system” is displayed, and start-up takes longerthan usual (a few minutes or more).In this case, wait for the computer to start up.The power indicator will blink quickly (in green); in this case, the power doesnot turn on, or the computer does not resume from standby or hibernation mode.To start the computer, leave it in an environment with a temperature of 5°C{41°F} or more for about an hour, and try turning the power on once more.NOTE
17Operation3Log on to WindowsWindows 2000After confirming that the hard disk drive indicator ( ) has turned off, input the username and password, then select [OK]. Until the correct user name and password areentered, the computer will not operate.Windows XPAfter confirming that the hard disk drive indicator ( ) has turned off, select the userand input the password, then select  .  Until the correct password is entered, thecomputer will not operate.4Select your applicationYou are able to start working on your computer.The power saving function is factory set, so if there is no input from a key, the touchpad, the touchscreen (only for models with touchscreen) or an external mouse (whenone is connected) for a certain interval of time, the power to the LCD and hard diskmay be turned off.  The LCD will resume operation when the touch pad, thetouchscreen (only for models with touchscreen) or an external mouse (when one isconnected) is used or a key is pressed.The power to the LCD may be turned off even when an application software is beinginstalled.  In this case, because it is conceivable that a selection dialog box will beshown, do not press   Space    or    Enter    to attempt to resume from this conditionas doing so may trigger a selection, but instead, press a key unrelated to the directtriggering of a selection, like   Ctrl   .In addition, when the computer is left alone, it automatically enters the standby orhibernation mode (    “Standby/Hibernation Functions”). The computer willresume by pressing the power switch.Windows XPWhen switching to a different user with the Fast User Switching function, it may notbe possible to set the settings of the display. In this case, log on with the administra-tor authority again, not using the Fast User Switching function, and try the operationonce more.NOTEThree incorrect attemptsorNo password for about a minuteThe correct password Will Start Will Not Start(Power off)If [Enter Password] is displayedEnter your password* and press   Enter   . (   “Security Measures”)*Supervisor Password or User Password set in the Setup Utility (notthe Windows password).When an application or file that was previously displayedappears on your screenThe standby or hibernation mode has been set (   “Standby/HibernationFunctions”).Enter Password [        ]
18OperationShutting Down (power off your computer)To shut down using the keyboard,Windows 2000Press       ,   U   , and select [Shut down] with                        , then press    Enter   .Windows XPPress       ,   U   , and select [Turn Off] with                        , then press    Enter   .To quickly resume computer operation after shutting down,The standby or hibernation function is available (   “Standby/HibernationFunctions”).NOTEThis procedure is for shutting down the computer without using the standby or hibernationfunction (   “Standby/Hibernation Functions”).1Save important data and close each application2  Windows 2000Select [Start] - [Shut Down]Windows XPSelect [Start] - [Turn Off Computer]3  Windows 2000Select [Shut down], then select [OK]Windows XPSelect [Turn Off]Your computer will power off automatically.Restarting your computer (without shutting down)Windows 2000Select [Restart], then select [OK].Windows XPSelect [Restart].Starting Up/Shutting DownCAUTIONDo not do the following during the shutdown/restart procedure.• Connecting or disconnecting the AC adaptor.• Touching the power switch.• Performing any keyboard, touch pad, touchscreen (only for models withtouchscreen) or external mouse operations.• Closing the display.
19OperationTouch PadUse the touch pad to move the cursor on the display and perform normal computer operations.Left ButtonWork SurfaceBesides the above operations, operations such as Zoom and Pan are possible by allocatingthese functions to the buttons and/or pad. For more details, refer to [Mouse Properties]*.*Windows 2000 :Select [Start] - [Settings] - [Control Panel] - [Mouse].Windows XP: Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].The operations of Scroll, Pan or Zoom will differ depending on the application. There arecases the touch pad will not support these operations even with an application that sup-ports the functions.Right ButtonHandling the Touch PadThe touch pad is designed to be used with a fingertip only. Therefore, avoid the followingactions, which may cause damage to the work surface.•Placing any object on the work surface•Pressing down forcefully with sharp-pointed objects (e.g., nails) or hard objects that canleave marks (e.g., pencils and ball point pens)Try to avoid having any harmful substances such as oil, come in contact with the touch pad.The cursor may not work properly in such cases.When the touch pad becomes dirty:Wipe to dirt by using a dry soft cloth such as gauze or a soft cloth first applied with deter-gent diluted with water and then thoroughly wrung.Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface,e.g., discoloration.  In addition, do not use commercially-available household cleaners andcosmetics, as they may contain components harmful to the surface.orTwo quick taps, but on thesecond tap leaving your fin-ger down (applying pres-sure) and moving it on thework surface.While holding down the but-ton, moving your finger onthe work surface.orFunction OperationMoving the CursorTapping/ClickingDouble-Tapping/Double-ClickingDraggingScrollScroll a document(The movements will dif-fer depending on the ap-plication.)orMove the tip of your fingerlightly over the work surface.tapping clickingdouble-clickingdouble-tappingNOTE
20OperationThe Reference Manual and the Important Tips can be accessed on your computer. When a printer is connected, these manuals canalso be printed.The Reference Manual explains functions for you to make greater use of the computer, such as how to add peripheral devices,how the Setup Utility works, and other useful information. (Refer to the cover of this manual for a list of the main contentsincluded.)Important Tips provides information on how to maximize use of the battery pack, which is necessary for computing away fromyour home or office.  It also offers helpful explanations on how to use the Touchscreen more effectively (only for models withtouchscreen).Reference ManualIllustrations may be difficult to view depending on the magnification.  If the illustration is too small, magnify the display.The characters in PDF files (such as the Reference Manual) may be difficult to read depending on the Acrobat Reader settingsand the Windows Desktop settings. In such cases, change the Acrobat Reader settings with the following procedure.1Start up Acrobat Reader.2Select [Edit] - [Preferences] - [Accessibility], and then set [Color Scheme] to [Use colors specified in document].When the taskbar is hidden at the bottom portion of Acrobat Reader, set the maximum display window size.If a printer is connected, we recommend printing pages.  The illustrations and display samples may not print with a highquality.Windows XPWhen switching to a different user with the Fast User Switching function, PDF files may not be printed properly. In this case,log on with the administrator authority again, not using the Fast User Switching function, and try the operation once more.NOTERunning the Reference Manual or Important TipsReference ManualWindows 2000Select [Reference Manual] in [Start] - [Programs] - [Panasonic] - [On-Line Manuals]Windows XPSelect [Reference Manual] in [Start]Important TipsSelect   on the desktopImportant Tips can also be accessed from the following menu.Windows 2000Select [Important Tips] in [Start] - [Programs] - [Panasonic] - [On-Line Manuals]Windows XPSelect [Important Tips] in [Start] - [All Programs] - [Panasonic] - [On-Line Manuals]When the Reference Manual or Important Tips is started up for the first time, the License Agreement of the Acrobat Reader may bedisplayed. If it is displayed, after reading the agreement, select [Accept] to access the Reference Manual or Important Tips.
21TroubleshootingList of Error CodesThe following is a list of the messages that BIOS can display.  Most of them occur during POST.  Some of them display informationabout a hardware device, e.g., the amount of memory installed.  Others may indicate a problem with a device, such as the way it hasbeen configured.  Following the list are explanations of the messages and remedies for reported problems.If your system displays any of the below error messages other that the ones marked with an asterisk (*), write down the messageand contact Panasonic Technical Support.  If your system fails after you make changes in the Setup menus, reset the computer,enter Setup and install Setup defaults or correct the error.0200 Failure Fixed DiskFixed disk in not working or not configured properly.  Check to see if fixed disk is attached properly.  Run Setup.  Find out ifthe fixed-disk type is correctly identified.0210 Stuck keyStuck key on keyboard.0211 Keyboard errorKeyboard not working.0212 Keyboard Controller FailedKeyboard controller failed test.  May require replacing keyboard controller.0213 Keyboard locked - Unlock key switchUnlock the system to proceed.0230 System RAM Failed at offset : nnnnSystem RAM failed at offset nnnn of in the 64k block at which the error was detected.0231 Shadow RAM Failed at offset : nnnnShadow RAM failed at offset nnnn of the 64k block at which the error was detected.0232 Extended RAM Failed at offset : nnnnExtended RAM Failed at address line : nnnnExtended memory not working or not configured properly at offset or address nnnn.0250 System battery is dead - Replace and run SETUPThe CMOS clock battery indicator shows the battery is dead.  Replace the battery and run Setup to reconfigure the system.*0251 System CMOS checksum bad - Default configuration usedSystem CMOS has been corrupted or modified incorrectly, perhaps by an application program that changes data stored inCMOS. The BIOS installed Default SETUP Values. If you do not want these values, enter Setup and enter your own values.If the error persists, check the system battery or contact Panasonic Technical Support.0260 System timer errorThe timer test failed. Requires repair of system board.0270 Real time clock errorReal-time clock fails BIOS test.  May require board repair.*0280 Previous boot incomplete - Default configuration usedPrevious POST did not complete successfully.  POST loads default values and offers to run Setup.  If the failure was caused byincorrect values and they are not corrected, the next boot will likely fail.  On systems with control of wait states, improperSetup settings can also terminate POST and cause this error on the next boot.  Run Setup and verify that the wait-stateconfiguration is correct.  This error is cleared the next time the system is booted.0281 Memory Size found by POST differed from EISA CMOSMemory size found by POST differed from EISA CMOS.02B0 Diskette drive A error02B1 Diskette drive B errorDrive A: or B: is present but fails the BIOS POST diskette tests.  Check to see that the drive is defined with the proper diskettetype in Setup and that the diskette drive is attached correctly.02B2 Incorrect Drive A type - run SETUPType of floppy drive A: not correctly identified in Setup.02B3 Incorrect Drive B type - run SETUPType of floppy drive B: not correctly identified in Setup.02D0 System cache error - Cache disabledContact Panasonic Technical Support.02F0: CPU ID:CPU socket number for Multi-Processor error.02F4: EISA CMOS not writableServerBIOS2 test error:  Cannot write to EISA CMOS.
22TroubleshootingList of Error Codes02F5: DMA Test FailedServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.02F6: Software NMI FailedServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).02F7: Fail - Safe Timer NMI FailedServerBIOS2 test error: Fail-Safe Timer takes too long.device address ConflictAddress conflict for specified device.Allocation Error for: deviceRun ISA or EISA Configuration Utility to resolve resource conflict for the specified device.Failing Bits : nnnnThe hex number nnnn is a map of the bits at the RAM address which failed the memory test.  Each 1 (one) in the map indicatesa failed bit.  See error 230,231 or 232 for offset address of the failure in System, Extended or Shadow memory.Invalid System Configuration DataProblem with NVRAM (CMOS) data.I/O device IRQ conflictI/O device IRQ conflict error.Operating System not foundOperating system cannot be located on either drive A: or drive C:.  Enter Setup and see if fixed disk and drive A: are properlyidentified.Parity Check 1 nnnnParity error found in the system bus.  BIOS attempts to locate the address and display it on the screen.  If it cannot locate theaddress, it displays ????.  Parity is a method for checking errors in binary data.  A parity error indicates that some data has beencorrupted.Parity Check 2 nnnnParity error found in the I/O bus.  BIOS attempts to locate the address and display it on the screen.  If it cannot locate theaddress, it displays ????.Press <F1> to resume, <F2> to SetupDisplayed after any recoverable error message.  Press <F1> to start the boot process or <F2> to enter a Setup and change thesettings.  Write down and follow the information shown on the screen.
23TroubleshootingDealing with Problems (Summary)The power indicator or bat-tery indicator is not lit[Enter Password] is displayedPOST Startup Error(s) isdisplayedWindows startup, or an op-eration is extremely slowThe date and time are incor-rectWhen resuming from thestandby or hibernationmode, [Enter Password]does not appear even if apassword has been set in theSetup UtilityWhen “Invalid system disk.Replace the disk, and thenpress any key.” (or a simi-lar message) is displayedWhen the administratorpassword is forgottenCheck the cable connection for the AC adaptor.Check to see if a fully charged battery is properly inserted.Remove the battery pack and disconnect the AC adaptor, then connect them again.Input your password.  If you have forgotten it, contact Panasonic Technical Support. page 21Press   F9   in the Setup Utility (   “Setup Utility”).   This will restore the SetupUtility’s settings to their default values (except the password settings).  Then, the SetupUtility must be run once again for you to input the appropriate operating environment set-tings.  (The processing speed depends on the application software used, so this operationmay not cause the processing speed to increase.)You can set the date and time using the following procedure:Windows 2000[Control Panel] - [Date/Time]Windows XP[Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time]If you continue to experience problems, the internal battery maintaining the clock mayneed to be replaced.  Contact Panasonic Technical Support.  When the computer is connected to a LAN, confirm the date and time of the server.  This computer will not correctly recognize the date and time starting from the year 2100A.D.Even when a password has been set in the Setup Utility, [Enter Password] does not appearwhen the computer resumes from the standby or hibernation mode. If you want to use thesecurity function when using the standby or hibernation mode, use the Windows passwordas follows:   Windows 2000Set the password in [Control Panel] - [Users and Passwords], then add the check mark for[Prompt for password when computer goes off standby] in [Control Panel] - [Power Op-tions] - [Advanced].   Windows XPSelect the account to change in [Control Panel] - [User Accounts] and set the password, thenadd the check mark for [Prompt for password when computer resumes from standby] in[Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced].This means a floppy disk that does not contain system startup information has been left inthe floppy disk drive.  Remove the floppy disk, and press any key.This message may appear when certain USB devices are connected.  Remove the USBdevice, or set [Legacy USB support] in [Advanced] menu of the Setup Utility to [Dis-able].If the message still appears even after trying the above two measures, this may be anindication that some type of hard disk failure has occurred.  Contact Panasonic TechnicalSupport.   Windows 2000After reinstalling, setup Windows and then set the password again.   Windows XPIf you have created a password reset disk (  page 15), a message is displayed when youfail to correctly enter the password. Follow the message’s instructions and set the passwordagain by using the password reset disk.If you have not created a password reset disk, after reinstalling, setup Windows and then setthe password again.When a problem occurs, refer to this page.  The “Reference Manual” also contains detailed information.  If a problem appears to berelated to a software application, read the software related manual.  If you still cannot troubleshoot the problem, contact PanasonicTechnical Support. Starting Up
24TroubleshootingDealing with Problems (Summary)When the previous item isnot the cause Press   F9    in the Setup Utility (     “Setup Utility”).   This will restore the SetupUtility’s settings to their default values (except the password settings).Try removing all peripheral devices.Check a disk error using the following procedure.   Windows 20001Select [Local Disk(C:)] with the right button in [My Computer], and select [Proper-ties].2Select [Tools] - [Check Now].3Select [Start] after selecting required items in [Check disk options].   Windows XP1Select [Local Disk(C:)] with the right button in [Start] - [My Computer], and select[Properties].2Select [Tools] - [Check Now].3Select [Start] after selecting required items in [Check disk options].At startup, hold down    F8    when the [Panasonic] screen disappears, and release yourfinger when the Windows Advanced Options Menu is displayed.  Start the computer inSafe Mode, and confirm the details of the error. Starting Up (continued)No display after powering onThe power has not beenturned off, but after a cer-tain period of time, there isno displayWhen the battery pack isused, the screen is darkerthan when the AC adaptoris connectedThe cursor cannot be con-trolled properlyAn afterimage appears (e.g.,green, red, and blue dotsremain on the display) orthere are dots not display-ing the correct colorsThe screen becomes disor-deredWhen there is no display to an external display,• Check your cable connection to the external display.• Confirm your display is powered on.• Check the settings for your external display.Try switching the display destination by pressing    Fn   +   F3   .Has the computer been set to the power-saving mode?    To resume operation of your computer from the condition the power of the display is off(for energy conservation purposes), press any key unrelated to the direct triggering of aselection, like   Ctrl   .To save power, your computer may have automatically entered the standby mode (powerindicator blinks green) or hibernation mode (power indicator turns off).  In such cases,press the power switch.If you want to switch the display destination repeatedly by pressing    Fn   +   F3   , makesure that the display destination has switched completely each time before pressing  Fn   +   F3   again.Press   Fn   +   F2   and adjust the brightness.  Note, however, that when the brightness isincreased, the battery running time will become shorter.Brightness can be set to separate levels for when the AC adaptor is connected and when it isdisconnected.If you are using an external mouse, ensure that the external mouse has been connectedcorrectly.Restart the computer by using the keyboard (Press       ,   U   , and select [Restart] with                       , then press    Enter   ).If the computer does not respond to keyboard commands, read “Computer hangs”( page 26).If an image is displayed for a prolonged period of time, an afterimage may appear.  Thisis not a malfunction.  The afterimage will disappear when a different screen is displayed.High-precision and advanced technologies are necessary in the production of color liquidcrystal displays (color LCDs).  Therefore, if 0.002% or less of the picture elements eitherfail to light or remain constantly lit (that is, more than 99.998% of elements are function-ing properly), no defect is considered to exist.Changing the number of colors or resolution of the display may affect the screen. Restartthe computer.Windows XPWhen using Extended Desktop, use the same display colors for the external display asthose used by the LCD. Display
25TroubleshootingThe external display nolonger displays properlyWhen the screensaver is set,an error will occur during aresume operationWindows XPAn error occurs or the com-puter freezes while usingExtended Desktop Display (continued)When an external display not compatible with the power saving mode is used with thecomputer, the external display may no longer display properly when the computer enters thecondition the power of the display is off (for energy conservation purposes).  In such cases,turn off the power to the external display.When the computer automatically enters the standby or hibernation mode while thescreensaver is running, an error may occur during a resume operation. In such cases, turn offthe screensaver or try changing the pattern of the screensaver.If you use a 3D screen saver while in Extended Desktop mode at a high resolution, an errormay occur or the computer may freeze. Under these conditions, do not use a 3D screensaver. Battery IndicatorThe red indicator lightsThe red indicator blinksThe orange indicator blinksThe battery level is very low (the charge is less than approx. 9% capacity).Connect the AC adaptor. You can use the computer when the indicator light is orange. If youdo not have an AC adaptor, save your data and power off your computer. After replacing thebattery pack with a fully charged one, turn your computer on.Quickly save your data and power off your computer. Remove the battery pack and discon-nect the AC adaptor, then connect them again.If the problem persists, contact Panasonic Technical Support.  The battery pack or recharg-ing function may be defective.Battery cannot be recharged temporarily because the internal temperature of the battery packis outside of the acceptable temperature range for recharging. Once the allowable range  re-quirement is satisfied, charging begins automatically. Your computer can be used normally. Reference ManualIs Acrobat Reader installed?If Acrobat Reader is not installed, run [c:\util\reader\ar505enu.exe] in [Start] - [Run] toreinstall the program.  When installing the program, do not change the installation destina-tion folder.  If the destination folder is changed, the Reference Manual cannot be openedfrom the [Start] menu.The Reference Manual isnot displayedWindows cannot be shutdown or restarted“This program is not re-sponding” is displayedwhen shutting down or log-ging off. Shutting downIf a USB device is connected, try removing it.This message appears periodically; for example, when using a Wireless LAN.  If the mes-sage appears, select [End Now]. Delete the check mark for [Show the tray icon] in thefollowing menu.Windows 2000[Start] - [Programs] - [Intel Network Adapters] - [Intel(R) PROSet]Windows XP[Start] - [All Programs] - [Intel Network Adapters] - [Intel(R) PROSet]
26TroubleshootingDealing with Problems (Summary)Some applications do notwork properly Fast User Switching FunctionWhen switching to a different user with the Fast User Switching function, the followingproblems may occur.• Some applications may not work properly (for example, PDF files may not be printedproperly).• It may not be possible to set the settings of the display.• A serial mouse may not work.• Wireless LAN may not work.If any of the above occur, log on with the administrator authority again, not using the FastUser Switching function, and try the operation once more.Windows XPPress   Ctrl   +   Shift   +   Esc   to open Task Manager and close the software applicationwhich is not responding.After shutting down by pressing the power switch for more than four seconds, press thepower switch to power on and open the application again.If the program no longer works normally, delete the program using the following proce-dure.Then reinstall the program.Windows 2000 : [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]Windows XP : [Start] - [Control Panel] - [Add or Remove Programs]Computer hangs Others
27TroubleshootingReinstalling SoftwareBefore Reinstallation1Turn the computer off and set the CD drive in the multi-media pocket.2Turn the computer on, and immediately hold down   F2   .Release the key when the Setup Utility starts up.If the password has been set, enter the Supervisor Pass-word.3Write down all of the contents of the Setup Utility andthen press    F9   .At the confirmation message, select [Yes] and then press  Enter   .4Select [Boot] menu, then select [CD Drive] and press    F6until [CD Drive] is at the top of the [Boot] menu.5Place the disc number one of the recovery CDs into theCD drive.6Press   F10   .At the confirmation message, select [Yes] and press   Enter   .The computer will restart, and this screen should appear.Reinstalling---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. Start restoring the operating system.2. Erase the whole data on HDD for security.3. End---------------------------------------------------------------------8Select [1. Yes, I agree to the provisions above and wish tocontinue!].This screen should appear.PreparingYou will need the followings:• Product Recovery CD-ROM and CD drive• If it was necessary to create backup disks (“Create Backup Disks for Reinstallation” on page 14), you will need thebackup disks (e.g., FIRSTAID FD) and the floppy disk drive.The operation of reinstallation takes about 20 - 30 minutes.ImportantBefore the reinstallation procedure, remove all peripherals (except for the CD drive).Be sure the AC adaptor is connected until the reinstallation procedure is completed.Windows 2000---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. Restore Windows(R) 2000 Professional to the whole HDD.2. Make two partitions, for the operating system and data. And restoreWindows(R) 2000 Professional to the operating system partition.(All existing partitions on HDD will be lost.)3. Restore Windows(R) 2000 Professional to the first partition.4. End------------------------------------------------------------------------------------------------------------------------------------------Select a number---------------------------------------------------------------------1. Restore Windows(R) XP Professional to the whole HDD.2. Make two partitions, for the operating system and data. And restoreWindows(R) XP Professional to the operating system partition.(All existing partitions on HDD will be lost.)3. Restore Windows(R) XP Professional to the first partition.4. End---------------------------------------------------------------------Windows XP9Make a selection from the menu.When selecting [2], enter the basic partition size forthe operating system installation and press   Enter   .(The data partition size is the remainder after subtract-ing the basic partition size.)To select [3], the initial partition size must be 6 GB ormore of the hard disk size. Reinstallation cannot be per-formed with a small partition size.7Select [1. Start restoring the operating system.].The License Agreement screen should appear.When reinstall procedure is performed, the contents of the hard disk will be erased.  Be sure to back up any critical data that ison your hard disk before running the reinstall procedure.The reinstall procedure will return the computer to its original condition.• If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstall procedure.
28Troubleshooting12 Restart the computer by pressing  Del    and immediately hold down    F2   . Release thekey when the Setup Utility starts up.If the password has been set, enter the Supervisor Pass-word.13 Press    F9  .At the confirmation message, select [Yes] and then press   Enter   .  (The Setup Utility settings will return to theirdefault values.  Even the security settings with the excep-tion of the password(s) will return to their default values.)14 Press   F10   .At the confirmation message, select [Yes] and pressEnter   .15 Perform the setup procedure for Windows by followingthe instructions on the screen.Windows 2000  Page 12Windows XP  Page 1316 Run the Setup Utility and change the settings where nec-essary.Reinstalling Software10 At the confirmation message, press   Y   .The operation of reinstallation for the hard disk starts au-tomatically. (The operations take about 15 minutes.)11 After the reinstallation procedure completes, the follow-ing message will appear on the display.Remove the recovery CD.Ctrl   +   Alt   +Windows(R) 2000 Professional install wizard will start after reboot.Remove the Product Recovery CD-ROM, then restart the computer by pressingCtrl + Alt + Del (Delete).Windows 2000Windows(R) XP Professional install wizard will start after reboot.Remove the Product Recovery CD-ROM, then restart the computer by pressingCtrl + Alt + Del (Delete).Windows XP<Changing the drive letter>You can change the drive letter for the CD drive or hard diskdrive by the following steps.Drive letters can only be changed when two or more parti-tions have been created on the hard disk drive. The nameof the C: drive cannot be changed.We recommend that you make these changes before in-stalling applications.Windows 20001Select [Start] - [Settings] - [Control Panel] - [Administra-tive Tools] - [Computer Management].2Select [Disk Management] from [Storage].3Right click on the partition of the hard disk or the name ofthe CD drive and select [Change Drive Letter and Path...].4Select [Edit].5Select [Assign a drive letter] and select the new drive let-ter, and then select [OK].6At the confirmation message, select [Yes].Windows XP1Select [Start] - [Control Panel] - [Performance and Mainte-nance] - [Administrative Tools] - [Computer Management].2Select [Disk Management] from [Storage].3Right click on the partition of the hard disk or the name ofthe CD drive and select [Change Drive Letter and Paths...].4Select [Change].5Select [Assign the following drive letter] and select thenew drive letter, and then select [OK].6At the confirmation message, select [Yes].When the FIRSTAID FD is to be created, follow the stepsin the readme.txt on the disk. (  page 14)NOTEDo not cancel the reinstall procedure before it iscompleted.When a message appears instructing you to insertthe next CD, insert the recovery CD showing thenext number in the sequence, and then select [OK].If the message “The media does not contain the cor-rect file” appears, select [OK]. A message will ap-pear instructing you to insert the next CD.Confirm that the proper recovery CD has been in-serted by opening the tray of the CD drive and thenclose the tray, then select [OK].CAUTION
29AppendixLIMITED USE LICENSE AGREEMENTTHE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC® PRODUCT (“PRODUCT”)ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITHTHE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMEDTO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.Matsushita Electric Industrial Co., Ltd. (“MEI”) has developed or otherwise obtained the Programs and hereby licensestheir use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) toachieve your intended results, and for the installation, use and results obtained therefrom.LICENSEA. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs inaccordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving onlya LIMITED LICENSE TO USE  the Programs and related documentation and that you shall obtain no title,ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms,concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all ofwhich title, ownership and rights shall remain with MEI or its suppliers.B. You may use the Programs only on the single Product which was accompanied by the Programs.C. You and your employees and agents are required to protect the confidentiality of the Programs. You may notdistribute or otherwise make the Programs or related documentation available to any third party, by time-sharingor otherwise, without the prior written consent of MEI.D. You may not copy or reproduce, or permit to be copied or  reproduced, the Programs or related documentationfor any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support ofyour use of the Programs on the single Product which was accompanied by the Programs. You shall not modify,or attempt to modify, the Programs.E. You may transfer the Programs and license them to another party only in connection with your transfer of thesingle Product which was accompanied by the Programs to such other party. At the time of such a transfer, youmust also transfer all copies, whether in printed or machine readable form, of every Program, and the relateddocumentation, to the same party or destroy any such copies not so transferred.F. You may not remove any copyright, trademark or other notice or product identification from the Programs andyou must reproduce and include any such notice or product identification on any copy of any Program.YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACETHE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, INWHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMIT-TED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.TERMThis license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminatethis license at any time by destroying, at your expense, the Programs and related documentation together with allcopies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditionstherefor set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Uponany such termination, you agree to destroy, at your expense, the Programs and related documentation together with allcopies thereof in any form.YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUNDBY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT,ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-TER OF THIS AGREEMENT.About Intel® software productsThe enclosed software products and documentation were developed at private expense, and are provided with “RESTRICTEDRIGHTS.” Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 andDFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment ofIntel's proprietary rights in the product.
30AppendixA. MEI vous octroie par les présentes le droit et la licence personnels, non cessibles et non exclusifs d'utiliser lesLogiciels conformément aux termes, clauses et conditions de ce Contrat. Vous reconnaissez ne recevoir qu'undroit limité d'utiliser les Logiciels et la documentation les accompagnant et vous vous engagez à n'obtenir aucundroit de titre, propriété ni aucun autre droit vis-à-vis des Logiciels et de la documentation les accompagnant nivis-à-vis des algorithmes, concepts, dessins, configurations et idées représentés par ou incorporés dans lesLogiciels et la documentation les accompagnant, dont les titres, propriété et droits resteront tous à MEI ou àleurs propriétaires.B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagné par les Logiciels.C. Vous et vos employés ou agents êtes requis de protéger la confidentialité des Logiciels. Vous ne pouvez nidistribuer ni mettre les Logiciels et la documentation les accompagnant à la disposition d'un tiers, par partage detemps ou de quelque autre manière que ce soit, sans l'autorisation écrite préalable de MEI.D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documen-tation les accompagnant pour quelque fin que ce soit, à l'exception d'une (1) copie des Logiciels à des fins desauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagnépar les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels.E. Vous ne pouvez céder les Logiciels et en octroyer la licence à une autre partie qu'en rapport avec votre cessiondu Produit unique qui est accompagné par les Logiciels à cette autre partie. Au moment de cette cession, vousdevez céder également toutes les copies, que ce soit sous forme imprimée ou lisible par la machine, de tous lesLogiciels ainsi que de la documentation les accompagnant, à la même partie ou détruire les copies non cédées.F. Vous ne pouvez retirer aucune marque de droits d'auteur, marque ou autre ni aucune identification de produitdes Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur toutes lescopies des Logiciels.Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurscopies, de façon électronique ou mécanique, en tout ou en partie.Vous ne pouvez utiliser, copier, modifier, altérer ni céder les Logiciels ni aucune de leurs copies, en tout ou en partie,à l'exception de ce qui est expressément stipulé dans ce contrat.Si vous cédez la possession de toute copie ou de tout Logiciel à une autre partie, à l'exception de ce qui est autoriséau paragraphe E ci-dessus, votre licence est automatiquement résiliée.LicenceTermes, clauses et conditionsCette licence n'est effective que pour la durée de possession ou de crédit-bail du Produit, à moins d'une résiliationantérieure. Vous pouvez résilier cette licence à tout moment en détruisant, à vos frais, les Logiciels et la documentationles accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera également résiliée,avec application immédiate, si les conditions de résiliation définies ailleurs dans ce contrat se sont réalisées ou si vousne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la résiliation, vous acceptez dedétruire, à vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque formeque ce soit.Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accepté de respecter ses termes,clauses et conditions. Vous reconnaissez en outre qu'ils sont la description complète et exclusive du contrat concluentre nous, contrat qui remplace et annule toute proposition ou contrat précédent, écrit ou oral, et toute autre commu-nication entre nous, relativement à l'objet du présent contrat.Le(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic® (le “Produit”) sont exclusivement concédés enlicence à l'utilisateur ultime (“vous”), et ils ne peuvent être utilisés que conformément aux clauses contractuelles ci-dessous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et condi-tions des présentes.Matsushita Electric Industrial Co., Ltd. (“MEI”) a mis au point ou obtenu les Logiciels et vous en concède l'utilisation parles présentes. Vous assumez l'entière responsabilité du choix de ce Produit (y compris des Logiciels associés) pourobtenir les résultats escomptés, ainsi que de l'installation, de l'utilisation et des résultats obtenus.Contrat de licence d’usage limité
31AppendixThis computer is equipped with a utility for erasing hard disk data.When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard diskdata following the steps below.The hard disk data erase utility erases data using an “overwriting” method, but there is a possibility that due to malfunctions orother operational errors, data may not be completely erased. There are also specialized devices that may be able to read datathat has been erased using this method. If you need to erase highly confidential data, we recommend that you contact acompany that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses ordamages suffered as a result of the use of this utility.PreparingHard Disk Data Erase UtilityNOTEBe sure the AC adaptor is connected until the procedure is completed.This utility can only be used for internal hard disk.  It cannot be used to erase data from external hard disks.This utility cannot erase data from damaged disk.This utility cannot erase data for specific partitions.After executing this utility, the computer cannot be booted from the hard disk.You will need the Product Recovery CD-ROM and CD drive.Procedure1Turn the computer off and set the CD drive in the multimedia pocket.2Turn the computer on, and immediately hold down   F2   . Release the key when the Setup Utility starts up.If the password has been set, enter the Supervisor Password.3Select [Boot] menu, then select [CD Drive] and press   F6   until [CD Drive] is at the top of the [Boot] menu.4Place disc number one of the recovery CDs into the CD drive.5Press    F10  .At the confirmation message, select [Yes] and press    Enter   .The computer will reboot, and this screen should appear.---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. Start restoring the operating system.2. Erase the whole data on HDD for security.3. End---------------------------------------------------------------------6Select [2. Erase the whole data on HDD for security.].7At the confirmation message, press   Y   .8At [<<<Start menu>>>], press    Enter   .9The time required for erasing data will be displayed.Press   Space   .10 At the confirmation message, press   Enter   .The operation of erasing the hard disk starts.11 After the operation is complete:Under normal conditions, the message [Hard disk data has been deleted.] will be displayed.If a problem occurred during the operation, an error message will be displayed.12 Remove the recovery CD, then turn off the computer by using the power switch.
32AppendixWinDVD™ (hereafter, WinDVD) is a software application for DVD playback.Here, you will find explanations and general information on the installation procedure and how to access the online manual.WinDVD™Installing  WinDVDCAUTIONClose all other software application before running the Setup program for WinDVD for added safety.Log on as the administrator.1Set the WinDVD CD-ROM in the CD drive.The WinDVD setup program will run automatically (allow some time for disc recognition). When the setup program willnot run automatically, input [x:\setup] in [Start] - [Run] and select [OK]. (“x”is the drive letter. You can change the letter tosuit your preference.)2Select  [Next] at the Welcome Message.3After reading the “License Agreement”*, select [Yes] if you agree to the terms.*Refer to the “LIMITED USE LICENSE AGREEMENT” ( page 29)4Follow the on-screen instructions and install WinDVD.<Confirmation of the DVD-ROM drive settings>To run WinDVD, it is necessary to make the following settings.1Windows 2000 Select [Start] - [Settings] - [Control Panel] - [System] - [Hardware] - [Device Manager].Windows XP Select [Start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Man-ager].2Double-click [Primary IDE Channel] for [IDE ATA/ATAPI controllers].3Select [Advanced Settings], and confirm that [Transfer Mode] is set to [DMA if available] for [Device 0].4Double-click [Secondary IDE Channel] for [IDE ATA/ATAPI controllers] and perform as the step   .Do not enter the standby or hibernation mode while WinDVD is running.Do not start WinDVD while the hard disk drive indicator is blinking immediately after the computer was started up.If you maximize the video display window, you can return to the original window size by double-clicking over theimages.During video playback (while the access lamp is on), do not eject the disc.Do not use other applications or the Command Prompt, and do not change the settings of the screen properties.In some cases, when the number of colors for the display is increased, a message appears and the DVD cannot be played.If this happens, reduce the number of display colors.Immediately after resuming from a pause, frame dropping may occur depending on the operating environment or DVDvideo (images or sounds are disrupted).In the Extended Desktop (Dualview) or simultaneous (internal/external) display mode, there are times when images orvideo are not displayed correctly.During a prolonged period of rapid advance, the pause mode may be established at some point.  If this happens, exitWinDVD, and restart.NOTERunning WinDVDWindows 2000Select [Start] - [Programs] - [InterVideo WinDVD] - [InterVideo WinDVD] or select   on the desktop.Windows XPSelect [Start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD] or select   on the desktop.<How to access the online manual>Select “?” of the WinDVD control panel.
33AppendixAbout Regions SettingInformationInquires about WinDVD should be made to InterVideo, Inc.InterVideo, Inc.URL: http://www.intervideo.com/E-mail: support@intervideo.comThe DVD-Video has a region code that is fixed according to the region where it is sold. In order to play a DVD-Video, theregion code of the player software and of the drive must match that of the DVD-Video.<Example>For U.S.A. and Canada: “1”For Europe: “2”The region code is not set prior to the shipment of this drive. Therefore, operations will differ depending on the first DVD-Video played.In the case of a DVD-Video with a specific region code:The drive will automatically be set with the same region code as the DVD-Video.In the case of any other DVD-Video:[Confirm Region] appears. Select region code and select [OK]. Play now begins.([Confirm Region] may not be displayed for some DVD-Videos. To confirm the current region code and the number ofsettings remaining, right-click on the WinDVD screen and select [Setup]-[Region].)CAUTIONThe region code can be set a total of five times, including the initial setting.  Proceed very carefully, because after the fourthchange has been made, the region code set last is fixed and no further changes can be made.The user must take responsibility for any trouble that results from illegally changing or altering the region code.NOTE[Confirm Region] will also be displayed if a DVD-Video with one region code is inserted into a drive for which anotherregion code has already been set.
34AppendixNames and Functions of PartsBefore using the computerfor the first time, carefullyread the [LIMITED USE LI-CENSE  AGREEMENT].  Ifyou agree to the conditions,remove the seal.Power Switch(    “LED Indicators”)Power statusBattery pack statusLED IndicatorsThis hole allows heat to exit.Do not block or place the computer in alocation that may prevent proper venti-lation.CAUTION(    “External Display”)External Display PortSerial PortVentilation Hole(    “PC Cards”)PC Card Slots(    “USB Devices”)USB PortsSound is output from Card Speakers built into the backpanel of the LCD screen.To adjust the volume:  Fn   +   F5   /   Fn   +   F6Speaker on/off :   Fn   +   F4( page 19)Touch PadFor enhanced portability andin-the-field efficiency.Carrying HandleFor information on the key combi-nations available. (    “Key Combinations”)(    “LED Indicators”)LED IndicatorsCaps LockNumeric Key (NumLk)Scroll Lock (ScrLk)Multimedia pocket device statusHard disk drive status(    “Multimedia Pocket” and “CD Drive”)Multimedia PocketFunction KeysSpeakersDC-IN Jack DC IN 15.1-16.0 V(    “Wireless LAN”)Wireless LAN AntennaLCDUse this port to a serial mouse or serial com-munication devices.(Only for models with touchscreen:  “Touchscreen”)
35AppendixUse only a monaural condensermicrophone (miniature jack).  Us-ing an input source other than amonaural condenser microphonemay not allow audio to be input ormay damage the equipment.Use this jack to connect  head-phones or amplifier-equippedspeakers.  Audio output from theinternal speaker is disabled whenheadphones or external speakersare connected.(    “LAN”)(    “Modem”)LANModemMicrophone JackHeadphone JackThis hole allows heat to exit.Ventilation HoleI/O Box ConnectorMP Release Button(    “Multimedia Pocket” ) (    “RAM Module”)(    on the desktop,   “Battery Power”)Battery PackRAM Module Slot(    “Port Replicator”)Expansion Bus ConnectorDo not block or place the computer in alocation that may prevent proper venti-lation.CAUTIONFor connecting printer, external mouse, keyboard,etc., through the I/O box (optional).A lithium ion battery that is recyclable powers the product youhave purchased.  Please call 1-800-8-BATTERY for informationon how to recycle this battery.L’appareil que vous vous êtes procuré est alimenté par une batterieau lithium-ion. Pour des renseignements sur le recyclage de labatterie, veuillez composer le 1-800-8-BATTERY.Security Lock LOCKA cable can be connected to preventtheft of your computer. For more in-formation, read the manual that comeswith the cable.
36AppendixModel No.CPUMemory (Expandable to)Video MemoryLCD TypeDisplayed Colors*1External DisplayHard Disk DriveKeyboardPointing DeviceSpeakerSoundSlots PC Card SlotsAllowable current(total for two slots)RAM Module Slot*4Interface External Display PortSerial PortMicrophone Jack*5Headphone JackExpansion BusConnectorUSB PortI/O Box ConnectorModemLANWireless LANAC Adaptor*6InputOutputPower Consumption*7In use TemperatureHumidityNot in Temperatureuse HumidityCF-73E3KVXDM CF-73ECKTXDM CF-73ECNTXDM CF-73ECLTXDM CF-73ECPTXDMCF-73E3KVXKM CF-73ECKTXKM CF-73ECNTXKM CF-73ECLTXKM CF-73ECPTXKMCF-73E3KTXKMIntel® Pentium M processor 1.4 GHzL2 (Second) Cache Memory: 1 MB256 MB 512 MB 256 MB 512 MB(768 MB Max.) (1024 MB Max.) (768 MB Max.) (1024 MB Max.)32 MB 64 MB13.3 type (TFT) 13.3 type (TFT) with Touchscreen256/65536/16M colors (640 x 480 dots/800 x 600 dots/1024 x 768 dots)256/65536/16M colors (640 x 480 dots/800 x 600 dots/1024 x 768 dots/1280 x 1024 dots/1600 x 1200 dots/2048 x 1536 dots)*240GB*387 keysTouch PadCard Speaker x 2WAVE and MIDI playbackTwo Type I or Type II, or one Type III3.3 V: 400 mA5 V: 400 mA200-pin, SO-DIMM, DDR-SDRAM, PC2100 CompliantMini Dsub 15-pin femaleDsub 9-pin maleMiniature jack, 3.5 DIAMiniature jack, 3.5 DIAImpedance 32 Ω, Output Power 4 mW x 2Dedicated 84-pin female4-pin x 2, USB 2.0Dedicated 36-pin maleRJ-11 jack Data: 56 kbps (V.92)   FAX:14.4 kbpsRJ-45 jack IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX802.11b100 V - 240 V AC, 50 Hz/60 Hz15.6 V DC, 5.0 AApprox. 43 W*8 / Approx. 80 W (maximum when recharging in the ON state)5 °C to 35°C  {41 °F to 95 °F}30% to 80% RH  (No condensation)-20 °C to 60 °C  {-4 °F to 140 °F}30% to 90% RH  (No condensation)SpecificationsMain SpecificationsTouch Pad, Touchscreen (Anti-Reflection, Stylus (included) touch ca-pable)*1A 16M color display is achieved by using the dithering function.    Windows XP   : A 256 color and 640x480 dots are not supported.*2Maximum resolution depends on the specifications of the external display.    Windows XP    : A 256 color and 640x480 dots are not supported.*31GB = 109 bytes*4Only a RAM card designed for PC2100 can be added.*5Use only a monaural condenser microphone.*6The AC adaptor is compatible with power sources up to 240 V AC adaptor.This computer is supplied with a 125 V AC compatible AC cord.*7Approx. 1.0 W when the battery pack is fully charged (or not being charged) and the computer is off.Approx. 1.2 W when the Wake up from LAN function has been enabled.*8Rated power consumption.Environ-ment
37AppendixModel No.Multimedia Pocket DeviceSupports DVD-ROMCD-ROMDVD-ROM read*5CD-ROM read*5CD-R write*6CD-RW writeModel No.Battery PackMain batteryMain battery +Second batteryMain batteryMain battery +Second batteryClock BatteryPhysical Dimensions(W x H x D)Weight (including the carryinghandle)CF-73E3KVXDM CF-73E3KVXKM CF-73ECKTXDM CF-73ECKTXKM CF-73ECLTXDMCF-73E3KTXKM CF-73ECNTXDM CF-73ECNTXKM CF-73ECPTXDMCF-73ECLTXKMCF-73ECPTXKMLi-ion 11.1 V, 3.8 AhApprox. 5 hours Approx. 6 hours Approx. 5 hours Approx. 6 hours Approx. 4 hoursApprox. 9 hours Approx. 11 hours Approx. 9 hours Approx. 11 hours Approx. 7hoursApprox. 3 hoursApprox. 6 hoursCoin type lithium battery 3.0 V297 mm x 32 - 42.5 mm x 254 mm 297 mm x 35.5 - 46 mm x 254 mm{11.7 " X 1.2 - 1.7 " X 10 "} {11.7 " X 1.4 - 1.8 " X 10 "}(excluding the carrying handle) (excluding the carrying handle)Approx. 2.2 kg {Approx. 4.9 lb.} Approx. 2.5 kg {Approx. 5.5 lb.}Main Specifications*1The numerical value given for the following conditions varies depending on the usage conditions.LCD brightness: minimum[Audio Power Management] in the Setup Utility: [Enable][Power schemes] in [Power Options]: [Max Battery]ATi POWERPLAY: [Optimal Battery Life]Wireless LAN: radio off Multimedia Pocket DeviceCF-73E3KVXDM /CF-73E3KVXKMDVD-ROM DriveDVD-5, DVD-9, DVD-10, DVD-18,DVD-R*3(3.95 GB, 4.7 GB), DVD-RW*3 (4.7 GB), DVD-RAM*3*4 (2.6GB, 4.7 GB)CD-Audio, CD-ROM, CD-R*3,Photo CD, VideoCD, EnhancedMusic CD, CD-RW*3, CD-TEXT8x speed (Max.)24x speed (Max.)OperatingTime*1ChargingTime*1 SoftwareCF-73E3KVXDM / CF-73ECKTXDM /CF-73ECNTXDM / CF-73ECLTXDM /CF-73ECPTXDMMicrosoft® Windows® 2000 Professional with Ser-vice Pack3 (NTFS File System)Setup UtilityDMI ViewerAdobe® Acrobat® ReaderHard Disk Data Erase Utility*2CF-73E3KVXKM / CF-73E3KTXKM /CF-73ECKTXKM / CF-73ECNTXKM /CF-73ECLTXKM / CF-73ECPTXKMMicrosoft® Windows® XP Professional with Ser-vice Pack1 (NTFS File System)*2The Product Recovery CD-ROM is required.Model No.Operating SystemUtility ProgramsCF-73E3KTXKM /CF-73ECKTXDM / CF-73ECNTXDM /CF-73ECLTXDM / CF-73ECPTXDM / CF-73ECKTXKM /CF-73ECNTXKM / CF-73ECLTXKM / CF-73ECPTXKMDVD-ROM & CD-R/RW DriveDVD-5, DVD-9, DVD-10, DVD-18, DVD-R*3(3.95 GB, 4.7GB), DVD-RW*3 (4.7 GB), DVD-RAM*3*4 (2.6 GB, 4.7 GB)CD-Audio, CD-ROM, CD-R, Photo CD, VideoCD, EnhancedMusic CD, CD-RW, CD-TEXT8x speed (Max.)24x speed (Max.)4x speed, 8x speed, 16x speed (Max.), 24x speed (Max.)4x speed, 8x speed, 10x speed*3Read only.*4In the case of DVD-RAM, only non-cartridge discs or removable cartridge discs can be used.*5If an unbalanced disc (e.g., a disc with which the balance has been displaced from the center) is inserted, the speed may become slower ifthere are large vibrations while the disc is rotating.*6Depending on the disc, the writing speed may become slower.
38AppendixLIMITED WARRANTYPANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTYPanasonic Computer Solutions Company (referred to as “Panasonic”) will repair this product (other than software, which is covered by a separatewarranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in materialsor workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are covered for aperiod of one (1) year from the date of purchase.This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required beforewarranty performance is rendered.This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which occursin shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introductionof liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modification orservice by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God.Limits and Exclusions:There are no other express warranties except as listed below.PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THEUSE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDINGTHE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTYPERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how longan implied warranty lasts, so the above limitations or exclusions may not apply to you.This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your productdevelops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the problem is not handled to your satisfac-tion, then write to the Consumer Affairs Division at the address indicated below.SOFTWARE LIMITED WARRANTYPanasonic Computer Solutions Company (referred to as “Panasonic”) warrants to you only that the disk(s) or other media on which the Programs arefurnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof toyou, as evidenced by your purchase receipt.This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your require-ments or that the operation of the Programs will be uninterrupted or error free.Panasonic’s entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defectivedisk or other media which is returned to Panasonic’s Authorized Service Center, together with a copy of the purchase receipt, within the aforesaidwarranty period.Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which thePrograms are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media otherwisethan on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse, neglect, mishan-dling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is attributable to acts ofGod. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or attempted to modify anyProgram.DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS.PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION,ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEGLI-GENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF USEOF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT,FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, sothe above limitations or exclusions may not apply to you.This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules.*          *          *To obtain service or technical assistance within the continental U.S.A. and Alaska.DIAL TOLL FREE: 1-800-LAPTOP5Correspondence requesting product information should be sent to:Panasonic Computer Solutions Company50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094For U.S.A.
39AppendixPANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTYCoverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, this computer product (excluding software media), whenpurchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the termsset forth below, during the period of warranty coverage specified.Remedy – In the event of a warranty claim, contact PCI’s representatives within the applicable warranty period, identifying the nature of the defectclaimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. – Fri. (excluding holidays) for instructions on how to obtainservice.  A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered bythis Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis.  Warranty replacement or repair issubject to the terms of this Limited Warranty for the balance of the original period of warranty coverage.No Coverage – This Limited Warranty does not cover products purchased outside Canada.  Neither does it cover damage to, failure of, or defects ina product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreignmatter into the product, alteration or servicing by anyone not authorized by PCI, or act of God.IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICECarefully pack the product, preferably in the original carton.  Include details of defect claimed and proof of date of original purchase.  No liability isassumed for loss or damage to the product while in transit, if you chose your own transportation carrier.SOFTWARE MEDIA LIMITED WARRANTYCoverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, that the disk(s) or other media on which software program(s)is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receiptas evidenced by your purchase receipt for your Panasonic Computer product.THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA.  PCI does not warrant the software.  Please refer to thesoftware licensor’s written warranty (accompanying the copy of the software) for any software warranty claim.Claim Procedure – In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it,transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, at the above address, within the warranty period, togetherwith a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media.Remedy – PCI’s entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only.  Itdoes not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or consequential damages, or otherclaims, whether or not of similar character.No Coverage – This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmen-tal conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attemptedmodification of the program, or if damaged by accident or act of God.   PCI is not responsible for damage to or loss of any program, data or removablestorage media.GENERALNO OTHER WARRANTIES – PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFT-WARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES.NO LIABILITY FOR CONSEQUENTIAL DAMAGES – IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUEN-TIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THECOMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL.IN ANY EVENT, PCI’S MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THECOMPUTER PRODUCT.NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTIONAROSE.Statutory Warranties – Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.Scope of CoverageWhole Product (except Batteries), AC adaptor and CD-ROM(if factory installed)Batteries,  CD-ROM (unless factory installed), Port Replicator,Extra Memory Modules and all other Peripherals, Options andAccessoriesPeriod of CoverageThree (3) Years from Date of OriginalEnd User Customer PurchaseOne (1) Year from Date of Original EndUser Customer PurchaseType of Failure CoverageDefective Materials or WorkmanshipDefective Materials or WorkmanshipFor Canada
Outline of the International ENERGY STAR® Office Equipment ProgramThe international ENERGY STAR® Office Equipment Program is an international programthat promotes energy saving through the use of computers and other office equipment.The program backs the development and dissemination of products with functions thateffectively reduce energy consumption. It is an open system in which business proprietorscan participate voluntarily. The targeted products are office equipment such as computers,displays, printers, facsimiles, and copiers. Their standards and logos are uniform amongparticipating nations.As an ENERGY STAR® Partner, Matsushita Electric Industrial Co., Ltd. hasdetermined that this product meets the ENERGY STAR® guidelines for energyefficiency.© 2003 Matsushita Electric Industrial Co., Ltd.  All Rights Reserved.Printed in JapanFJ0203-5073DFQX5379WBPanasonic Computer Solutions Company50 Meadowlands Parkway, Panazip 2F-5,Secaucus, NJ 07094Panasonic Canada Inc.5770 Ambler Drive Mississauga,Ontario L4W 2T3

Navigation menu