Panasonic of North America 9TGCF-W52 CF-W5 Notebook Computer with WLAN(a+b+g) and HSDPA User Manual WLANbg 50 T2 W2 Y2 a p65

Download:
Mirror Download [FCC.gov]
Document ID	683527
Application ID	12M+3k25zsQVKUFJkibPhQ==
Document Description	User Manual WLAN
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.12kB (963958 bits)
Date Submitted	2006-07-19 00:00:00
Date Available	2006-10-29 00:00:00
Creation Date	2004-08-10 02:50:01
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-08-10 15:16:33
Document Title	WLANbg_50_T2_W2_Y2-a.p65
Document Creator	PageMaker 6.5J
Document Author:	Administrator

Supplementary Instructions
for Wireless LAN
This manual contains supplementary instructions regarding the use of the computer. It explains the cases where the operation of the
computer differs from that in the Operating Instructions.
Your computer is equipped with Wireless LAN enabling you to communicate using radio frequencies.
FCC Radio Frequency Interference Requirements
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.
FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference
to co-channel Mobile Satellite systems.
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can
cause interference with and /or damage this product.
Specifications
Data transfer rates
Standards supported
Transmission method
Wireless channels used
RF frequency band
IEEE802.11a: 54/48/36/24/18/12/9/6Mbps (automatically switched)
IEEE802.11g: 54/48/36/24/18/12/9/6Mbps (automatically switched)
IEEE802.11b: 11/5.5/2/1 Mbps
IEEE802.11a/IEEE802.11g/IEEE802.11b
OFDM system, DSSS system
IEEE802.11a: Channels 36 to 64, 149 to 165
IEEE802.11b/IEEE802.11g: Channels 1 to 11
IEEE802.11a: 5.18~5.32GHz, 5.745~5.825GHz
IEEE802.11g/IEEE802.11b: 2412~2462MHz
Wireless LAN
If you use a wireless LAN, you can use a network without cable connections.
CAUTION
z Communication is performed through the wireless LAN antenna. Do not block the
antenna area with your hand or otherwise interfere with the passage of the radio
signals.
NOTE
z The communication speeds and distances differ depending on the devices that
support the wireless LAN, the installation environment and other ambient conditions.
z One characteristic of radio waves is that their transmission rate tends to drop as the
communication distance increases. It is recommended that the devices supporting
the wireless LAN be used in close vicinity to each other.
z The rate may drop while a microwave oven is being used.
Windows XP
z Do not use the Fast User Switching function.
Precautions
„ Do not use wireless LAN on airplanes, in hospitals, or in other
locations where wireless LAN signals may affect the operation
of devices in the vicinity.
z If you intend to use the computer in the environments described above, turn the wireless
LAN off using the following method:
Double-click
or
on the taskbar.
Select your wireless LAN adaptor and select [General].
Select [Off] for [Switch radio].
Select [OK].
The icon will turn to
Wireless LAN
„ To prevent theft of data or unauthorized access to the hard disk
via a wireless LAN.
z If you plan to use wireless LAN functions, we recommend that you do so only after
making the appropriate security settings, such as for data encryption.
„ We recommend turning the wireless LAN off when it is not used
or out of range.
z If you leave the wireless LAN on, the battery's operating time is shortened.
The Settings
To use the wireless LAN, set the profile using the following procedure.
The settings will vary for different network environments depending on the network system
being used. For more details, ask your system administrator or the person in charge of the
network.
CAUTION
z Set profiles for each user using the following procedure.
NOTE
Windows XP
z If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN
adaptor.] is displayed, select [Yes].
Windows 2000
z After setting the profile, delete the profile displayed at the time of purchase (profile
name: Default).
Double-click
on the taskbar.
Select your wireless LAN adapter and select [General].
Select [On] for [Switch radio].
Wireless LAN
Select [Networks] and select [Add].
Make necessary changes and select [Finish].
Enter the profile name and network name (SSID), and then make
other necessary changes, then select [Next].
Select [OK].
NOTE
z About WLAN Security Client
WLAN Security Client is an implementation of the client side of the IEEE 802.1X-Port
Based Network Access Control protocol.
• Since the WLAN Security Client has already started when
is displayed on the
taskbar, do not double-start it. If
is not displayed, start up the WLAN Security
Client in the following menu.
Windows XP
Select [Start] - [All Programs] - [Intel] - [WLAN Security Client Manager].
Windows 2000
Select [Start] - [Programs] - [Intel] - [WLAN Security Client Manager].
• For more information about how to use the WLAN Security Client, refer to [Help] in
the menu bar or;
Windows XP
Select [Getting Started Guide] or [User's Guide] in [Start] - [All Programs] - [Intel].
Windows 2000
Select [Getting Started Guide] or [User's Guide] in [Start] - [Programs] - [Intel].
Check the Communication Status
Select
or
on the taskbar to check the communication status.
For more information about how to use the Intel PROSet, refer to [Help] in the menu bar.
Wireless LAN
If the function fails to operate correctly
Read the operating instructions for the access point carefully and check the settings.
„ The access point fails to be displayed in [Available Networks]
z Select the profile you are using, and select [Advanced] in [Networks]. [Connect to ad hoc
networks only] may have been selected in [Connection preference]. In this case, select
[Connect to infrastructure and ad hoc networks].
z This computer uses channels 1 through 11*1. Check the channel being used.
*1
In the case of wireless communications, the frequency band being used can be divided into
segments, so that different communications can be conducted on each band segment. A "Channel"
refers to the individual frequency bandwidth divisions.
„ The access point cannot be accessed
z The network key setting may not conform to the access point.
Check the network key setting of the access point and, if necessary, set it again correctly.
z Depending on the access point and settings, access may not be accepted unless the
computer's MAC address is registered beforehand. In this case, check the computer's
MAC address using the following procedure and register it according to the operating
instructions of the access point.
1 Display [Command Prompt].
Windows XP
Select [Start] - [All Programs] - [Accessories] - [Command Prompt].
Windows 2000
Select [Start] - [Programs] - [Accessories] - [Command Prompt].
2 Input [ipconfig /all], and press Enter.
3 Make a note of the 12-digit string of alphanumerics displayed on "Physical
Address" line on Wireless LAN side. Then input [exit], and press Enter.
„ The IP address of the access point is wrong
z Following the operating instructions of the access point, set the IP address of the access
point again correctly.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:b15bbd0c-2750-44e0-8f50-1b499d8befaf
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Create Date                     : 2004:08:10 02:50:01Z
Modify Date                     : 2004:08:10 15:16:33+09:00
Metadata Date                   : 2004:08:10 15:16:33+09:00
Creator Tool                    : PageMaker 6.5J
Document ID                     : uuid:538f4310-387a-4235-89d1-ae7e845cde6f
Format                          : application/pdf
Creator                         : Administrator
Title                           : WLANbg_50_T2_W2_Y2-a.p65
Author                          : Administrator

EXIF Metadata provided by EXIF.tools