Panasonic of North America 9TGWL14A Wireless Network Adapter User Manual 2

Panasonic Corporation of North America Wireless Network Adapter 2

UserManual.wiki >

Panasonic of North America >

9TGWL14A User Manual >

User Manual2 HTML Version

User Manual2

Contents

OPERATING INSTRUCTIONS

Personal Computer

Introduction ....................................................14

Description of Parts .......................................16

First-time Operation .......................................18

Turning On / Turning Off ................................22

Useful Information

Handling and Maintenance ............................23

Installing Software .........................................27

Please read these instructions carefully before using this product, and save this manual for future use.

Getting Started

Useful Information

Troubleshooting

Read Me First

Getting Started

Safety Precautions .......................................... 2

Regulatory Information .................................... 7

Read Me First

Model No.

FZ-Y1series

Read Me First

Safety Precautions

To reduce the risk of injury, loss of life, elec-

WULFVKRFN¿UHPDOIXQFWLRQDQGGDPDJHWR

equipment or property, always observe the

following safety precautions.

Explanation of symbol word panels

The following symbol word panels are used

to classify and describe the level of hazard,

injury, and property damage caused when the

denotation is disregarded and improper use is

performed.

DANGER

Denotes a potential hazard that will result in

serious injury or death.

WARNING

Denotes a potential hazard that could result

in serious injury or death.

CAUTION

Denotes a hazard that could result in minor

injury.

NOTICE

Denotes a hazard that could result in prop-

erty damage.

The following symbols are used to classify

and describe the type of instructions to be

observed.

These symbols are used to alert users

WRDVSHFL¿FRSHUDWLQJSURFHGXUHWKDW

must not be performed.

This symbol is used to alert users to

DVSHFL¿FRSHUDWLQJSURFHGXUHWKDW

must be followed in order to operate

the unit safety.

DANGER

Precautions on the Battery Pack

Do Not Throw the Battery Pack into

a Fire or Expose It to Excessive Heat

Generation of heat, ignition or rupture

may result.

Do Not Insert Sharp Objects Into

the Battery Pack, Disassemble, or

Modify It

Electrolyte leakage, generation of heat,

ignition or rupture may result.

Do Not Short the Positive (+) and

Negative (-) Contacts

Generation of heat, ignition or rupture

may result.

•Do not place the battery pack to-

gether with articles such as neck-

laces or hairpins when carrying or

storing.

Avoid Extreme Heat (Near the Fire,

in Direct Sunlight, for Example)

Electrolyte leakage, generation of heat,

ignition or rupture may result.

Do Not Apply Shocks to the Prod-

uct by Dropping It, Applying Strong

Pressure to It, etc.

Electrolyte leakage, generation of heat,

ignition or rupture of the battery may

result.

•If this product is subjected to a

strong impact, damaged or de-

formed, stop using it immediately.

Do Not Charge the Battery Using

Methods Other Than Those Speci-

¿HG

If the battery is not charged using one

RIWKHVSHFL¿HGPHWKRGVHOHFWURO\WH

leakage, generation of heat, ignition or

rupture may result.

When the Battery Pack Has Deterio-

rated, Replace It With a New One

Continued use of a damaged battery

pack may result in heat generation,

ignition or battery rupture.

Read Me First

DANGER

Precautions on the Battery Pack

Do Not Use with Any Other Product

The battery pack is rechargeable and

ZDVLQWHQGHGIRUWKHVSHFL¿HGSURGXFW

If it is used with a product other than

the one for which it was designed,

electrolyte leakage, generation of heat,

ignition or rupture may result.

Do Not Use This Product with a Bat-

tery Pack Other Than the One Speci-

¿HG

8VHRQO\WKHVSHFL¿HGEDWWHU\SDFN

(Ä page 18) with your product.

Use of battery packs other than those

manufactured and supplied by Pana-

sonic may present a safety hazard

(generation of heat, ignition or rupture).

WARNING

If a Malfunction or Trouble Occurs,

Immediately Stop Use

If a Malfunction Occurs, Immediately

Unplug the AC Plug and the Battery

Pack

•This product is damaged

•Foreign object inside this product

•Smoke emitted

•Unusual smell emitted

•Unusually hot

Continuing to use this product while

any of the above conditions are pres-

HQWPD\UHVXOWLQ¿UHRUHOHFWULFVKRFN

•If a malfunction or trouble occurs,

immediately turn the power off and

unplug the AC plug, and then re-

move the battery pack. Then con-

WDFW\RXUWHFKQLFDOVXSSRUWRI¿FHIRU

repair.

Do Not Touch This Product in a

Thunderstorm If Connected with the

AC Cable or Any Other Cables

Electric shock may result.

Do Not Connect the AC Adaptor to

a Power Source Other Than a Stan-

dard Household AC Outlet

2WKHUZLVHD¿UHGXHWRRYHUKHDWLQJ

may result. Connecting to a DC/AC

converter (inverter) may damage the

AC adaptor. On an airplane, only con-

nect the AC adaptor/charger to an AC

RXWOHWVSHFL¿FDOO\DSSURYHGIRUVXFK

use.

Do Not Pull or Insert the AC Plug If

Your Hands Are Wet

Electric shock may result.

Clean Dust and Other Debris of the

AC Plug Regularly

If dust or other debris accumulates

on the plug, humidity, etc. may cause

a defect in the insulation, which may

UHVXOWLQD¿UH

•Pull the plug, and wipe it with a dry

cloth.

Pull the plug if the computer is not

being used for a long period of time.

Insert the AC Plug Completely

If the plug is not inserted completely,

¿UHGXHWRRYHUKHDWLQJRUHOHFWULFVKRFN

may result.

•

Do not use a damaged plug or loose

AC outlet.

Close the Connector Cover Tightly

When Using This Product Where

Is a Lot of Water, Moisture, Steam,

Dust, Oily Vapors, etc.

The entry of foreign matter may cause

D¿UHRUHOHFWULFVKRFNV

•If foreign matter has found its way

inside, immediately turn the power

off and unplug the AC cord, and

then remove the battery pack. Then

contact your technical support of-

¿FH

Do Not Disassemble This Product

You may receive an electric shock, or

foreign matter may enter and result in

D¿UH

Read Me First

Safety Precautions

WARNING

Do Not Turn the Volume Up to Loud

When Using Headphones

Listening at high volumes that over-

stimulate the ear for long periods of

time may result in loss of hearing.

Do Not Use This Product in Close

Contact With Your Body for a Long

Period of Time

•Depending on the direction of the

computer or the way you hold the

computer, yourhands and body will

be more exposed to the hot wind.

•Using this product with exposing

the skin to the heat source of this

product or AC adaptor for a long

period of time can cause a low-

temperature burn.

Do Not Do Anything That May Dam-

age the AC Cord, the AC Plug, or the

AC Adaptor

Do not damage or modify the cord,

place it near hot tools, bend, twist, or

pull it forcefully, place heavy objects

on it, or bundle it tightly. Continuing to

XVHDGDPDJHGFRUGPD\UHVXOWLQ¿UH

short circuit, or electric shock.

Do Not Expose Yourself or Other

Persons to the Hot Wind from the

Ventilation Hole (Exhaust) For a

Long Period of Time

Low-temperature burns may result.

Covering the ventilation hole (exhaust)

with your hand or other object can

cause heat to build up inside, possibly

resulting in burns.

CAUTION

Do Not Place This Product on Un-

stable Surface

If balance is lost, this product may fall

over or drop, resulting in an injury.

Avoid Stacking

If balance is lost, this product may fall

over or drop, resulting in an injury.

Do Not Leave This Product in High

Temperature Environment for a

Long Period of Time

Leaving this product where it will be ex-

posed to extremely high temperatures

VXFKDVQHDU¿UHRULQGLUHFWVXQOLJKW

may deform the cabinet and/or cause

trouble in the internal parts. Continued

use in such a resulting condition may

lead to short-circuiting or insulation

defects, etc. which may in turn lead to

D¿UHRUHOHFWULFVKRFNV

Do Not Block the Ventilation Hole

(Exhaust/Intake)

Using this product wrapped in cloth

or on top of bedding or a blanket can

block the ventilation hole and cause

heat to build up inside, possibly result-

LQJLQD¿UH

Hold the Plug When Unplugging the

AC Plug

Pulling on the cord may damage the

FRUGUHVXOWLQJLQD¿UHRUHOHFWULF

shock.

Do Not Move This Product While the

AC Plug Is Connected

The AC cord may be damaged, result-

LQJLQ¿UHRUHOHFWULFVKRFN

•If the AC cord is damaged, unplug

the AC plug immediately.

8VH2QO\WKH6SHFL¿HG$&$GDSWRU

With This Product

Using an AC adaptor other than the

one supplied (supplied with the unit or

one sold separately as an accessory)

PD\UHVXOWLQD¿UH

Do Not Subject the AC Adaptor to

Any Strong Impact

Using the AC adaptor after a strong im-

pact such as being dropped may result

LQHOHFWULFVKRFNVKRUWFLUFXLWRU¿UH

Take a Break of 10-15 Minutes Every

Hour

Using this product for long periods of

time may have detrimental health ef-

fects on the eyes or hands.

Read Me First

CAUTION

Do Not Connect a Telephone Line,

or a Network Cable Other Than the

2QH6SHFL¿HGLQWRWKH/$13RUW

If the LAN port is connected to a net-

work such as the ones listed below, a

¿UHRUHOHFWULFVKRFNPD\UHVXOW

•Networks other than 1000BASE-T,

100BASE-TX or 10BASE-T

•Phone lines (IP phone (Internet Pro-

tocol Telephone), Telephone lines,

internal phone lines (on-premise

switches), digital public phones,

etc.)

Do Not Expose the Skin to This

Product When Using the Product In

a Hot or Cold Environment.

Burns, low-temperature burns or frost-

bite may result.

•When it is necessary to expose the

skin to this product such as to scan

D¿QJHUSULQWSHUIRUPWKHRSHUDWLRQ

in the shortest time possible.

NOTICE

z Do not place the computer near a televi-

sion or radio receiver.

z Keep the computer away from magnets.

'DWDVWRUHGRQWKHÀDVKPHPRU\PD\EH

lost.

z This computer is not intended for the dis-

play of images for use in medical diagno-

sis.

z This computer is not intended for a use

with connection of medical equipment for

the purpose of medical diagnosis.

z Panasonic shall not be liable for loss of

data or other incidental or consequential

damages resulting from the use of this

product.

z Do not touch the terminals on the battery

pack. The battery pack may no longer

function properly if the contacts are dirty or

damaged.

z Do not expose the battery pack to water,

or allow it to become wet.

z If the battery pack will not be used for a

long period of time (a month or more),

charge or discharge (use) the battery pack

until the remaining battery level becomes

30% to 40% and store it in a cool, dry

place.

z This computer prevents overcharging of

the battery by recharging only when the

remaining power is less than approx. 95%

of capacity.

z The battery pack is not charged when the

FRPSXWHULV¿UVWSXUFKDVHG%HVXUHWR

FKDUJHLWEHIRUHXVLQJLWIRUWKH¿UVWWLPH

When the AC adaptor is connected to the

computer, charging begins automatically.

z 6KRXOGWKHEDWWHU\OHDNDQGWKHÀXLGJHW

into your eyes, do not rub your eyes. Im-

PHGLDWHO\ÀXVK\RXUH\HVZLWKFOHDUZDWHU

and see a doctor for medical treatment as

soon as possible.

NOTE

z The battery pack may become warm dur-

ing recharging or normal use. This is com-

pletely normal.

z Recharging will not commence if internal

Read Me First

Safety Precautions

temperature of the battery pack is outside

of the allowable temperature range (0 °C to

50 °C {32 °F to 122 °F}). (ÄReference

Manual “Battery Power”) Once the allow-

DEOHUDQJHUHTXLUHPHQWLVVDWLV¿HGFKDUJ-

ing begins automatically. Note that the

recharging time varies based on the usage

conditions. (Recharging takes longer than

usual when the temperature is 10 °C {50 °F}

or below.)

z If the temperature is low, the operating

time is shortened. Only use the computer

within the allowable temperature range.

z This computer has a high temperature

mode function that prevents the degra-

dation of the battery in high temperature

environments. (ÄReference Manual

“Battery Power”) A level corresponding to

a 100% charge for high temperature mode

is approximately equivalent to an 80%

charge level for normal temperature mode.

z The battery pack is a consumable item.

If the amount of time the computer can

be run by using a particular battery pack

becomes dramatically shorter and re-

peated recharging does not restore its

performance, the battery pack should be

replaced with a new one.

z When transporting a spare battery inside a

package, briefcase, etc., it is recommend-

ed that it be placed in a plastic bag so that

its contacts are protected.

z Always power off the computer when it is

not in use. Leaving the computer on when

the AC adaptor is not connected will ex-

haust the remaining battery capacity.

THIS PRODUCT IS NOT INTENDED FOR

USE AS, OR AS PART OF, NUCLEAR

EQUIPMENT/SYSTEMS, AIR TRAFFIC

CONTROL EQUIPMENT/SYSTEMS, AIR-

CRAFT COCKPIT EQUIPMENT/SYSTEMS*1,

MEDICAL DEVICES OR ACCESSORIES*2,

LIFE SUPPORT SYSTEMS OR OTHER

EQUIPMENTS/DEVICES/SYSTEMS THAT

ARE INVOLVED WITH ENSURING HUMAN

LIFE OR SAFETY. PANASONIC WILL NOT

BE RESPONSIBLE FOR ANY LIABILITY RE-

SULTING FROM THE USE OF THIS PROD-

UCT ARISING OUT OF THE FOREGOING

USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS

include Class2 Electronic Flight Bag (EFB) Sys-

tems and Class1 EFB Systems when used dur-

LQJFULWLFDOSKDVHVRIÀLJKWHJGXULQJWDNHRII

and landing) and/or mounted on to the aircraft.

Class1 EFB Systems and 2 EFB Systems are

GH¿QHGE\)$$$&$GYLVRU\&LUFXODU$

RU-$$-$$7*/7HPSRUDU\*XLGDQFH/HDÀHWV

No.36.

*2$VGH¿QHGE\WKH(XURSHDQ0HGLFDO'HYLFH

Directive (MDD) 93/42/EEC.

3DQDVRQLFFDQQRWJXDUDQWHHDQ\VSHFL¿FD-

tions, technologies, reliability, safety (e.g.

Flammability/Smoke/Toxicity/Radio Fre-

quency Emission, etc) requirements related

to aviation standards that exceed the speci-

¿FDWLRQVRIRXU&276&RPPHUFLDO2II7KH

Shelf) products.

Read Me First

Information to the User / Informations destinées aux utilisateurs

This product and your Health

This product, like other radio devices, emits

radio frequency electromagnetic energy. The

level of energy emitted by this product how-

ever is far much less than the electromagnetic

energy emitted by wireless devices like for

example mobile phones.

Because this product operates within the

guidelines found in radio frequency safety

standards and recommendations, we be-

lieve this product is safe for use by consum-

ers. These standards and recommendations

UHÀHFWWKHFRQVHQVXVRIWKHVFLHQWL¿FFRP-

munity and result from deliberations of panels

and committees of scientists who continually

review and interpret the extensive research

literature.

In some situations or environments, the use

of this product may be restricted by the propri-

etor of the building or responsible represen-

tatives of the organization. These situations

PD\IRUH[DPSOHLQFOXGH

z Using this product on board of airplanes,

z In any other environment where the risk of

interference to other devices or services is

SHUFHLYHGRULGHQWL¿HGDVKDUPIXO

If you are uncertain of the policy that applies

RQWKHXVHRIZLUHOHVVGHYLFHVLQDVSHFL¿FRU-

ganization or environment (e.g. airports), you

are encouraged to ask for authorization to use

this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or tele-

vision interference caused by unauthorized

PRGL¿FDWLRQRIWKLVSURGXFW7KHFRUUHFWLRQ

of interference caused by such unauthorized

PRGL¿FDWLRQZLOOEHWKHUHVSRQVLELOLW\RIWKH

user. We and its authorized resellers or dis-

tributors are not liable for damage or violation

of government regulations that may arise from

failing to comply with these guidelines. 26-M-1

<Uniquement pour les modèles avec réseau

ORFDOVDQV¿OHWRX%OXHWRRWK!

Ce produit et votre santé

Ce produit, comme tout autre appareil radio,

émet de

l’énergie radioélectrique. Toutefois, la quantité

d’énergie émise par ce produit est beaucoup

moins importante que l’énergie radioélec-

WULTXHpPLVHSDUGHVDSSDUHLOVVDQV¿OWHOV

que les téléphones portables. L’utilisation de

ce produit ne comporte aucun risque pour le

consommateur du fait que cet appareil opère

dans les limites des directives concernant

les normes et les recommendations de sécu-

rité sur les fréquences radio. Ces normes et

UHFRPPDQGDWLRQVUHÀqWHQWOHFRQVHQVXVGH

ODFRPPXQDXWpVFLHQWL¿TXHHWUpVXOWHQWGH

délibérations de jurys et comités de scienti-

¿TXHVTXLH[DPLQHQWHWLQWHUSUqWHQWFRQWLQXHO-

lement les nouveautés de la vaste littérature

sur les recherches effectuées. Dans certaines

situations ou environnements, l’utilisation de

ce produit peut être restreinte par le proprié-

taire du bâtiment ou par les représentants

responsables de l’organisation. Ces situations

SHXYHQWrWUHOHVVXLYDQWHVSDUH[HPSOH

z A bord d’un avion, ou

z Dans tout autre environnement où les

risques d’interférence sur d’autres appa-

reils ou services sont perçus ou identi-

¿DEOHVFRPPHGDQJHUHX[

Si vous n’êtes pas sûr de la réglementation

applicable à

O¶XWLOLVDWLRQG¶DSSDUHLOVVDQV¿OGDQVXQHRUJD-

QL]DWLRQRXXQHQYLURQQHPHQWVSpFL¿TXHSDU

exemple dans un aéroport) nous vous invitons

à demander l’autorisation

d’utiliser ce produit avant sa mise en marche.

Informations concernant la réglementation

Nous déclinons toute responsabilité pour

toute interférence radio ou télévision causée

SDUGHVPRGL¿FDWLRQVQRQDXWRULVpHVDSSRU-

tées à ce produit. La correction

G¶LQWHUIpUHQFHVFDXVpHVSDUGHWHOOHVPRGL¿-

cations non autorisées sera la seule respon-

sabilité de son utilisateur. Nousmêmes, les

UHYHQGHXUVRI¿FLHOVHWOHVGLVWULEXWHXUVQH

sommes pas responsable de tout dégât ou de

toute violation des règlements de l’État pou-

vant découler du non-respect de ces direc-

tives. 26-F-1

Regulatory Information

Read Me First

Regulatory Information

Lithium Battery / Pile au lithium

Lithium Battery!

This computer contains a lithium battery to

enable the date, time, and other data to be

stored. The battery should only be exchanged

by authorized service personnel.

Warning!

A risk of explosion from incorrect installation

or misapplication may possibly occur. 15-E-1

Pile au lithium!

Le micro-ordinateur renferme une pile au

lithium qui permet de sauvegarder certaines

données, notamment la date et l’heure. La

pile ne doit être remplacée que par un techni-

FLHQTXDOL¿p

Danger ! Risque d’explosion en cas de non

respect de cette mise en garde! 15-F-1

Information for Users on Collection and Disposal of Old Equip-

ment and used Batteries

These symbols are only valid in the European Union.

If you wish to discard this product, please contact your local authori-

ties or dealer and ask for the correct method of disposal. 53-M-1

Safety Precautions

The following safety precautions must be observed during all phases of the operation, usage, ser-

vice or repair of any Personal Computer or Handheld Computer incorporating wireless WAN mo-

dem. Manufacturers of the cellular terminal are advised to convey the following safety information

to users and operating personnel and to incorporate these guidelines into all manuals supplied

with the product. Failure to comply with these precautions violates safety standards of design,

manufacture and intended use of the product. Panasonic assumes no liability for customer failure

to comply with these precautions.

When in a hospital or other health care facility, observe the restrictions on the use of

mobiles. Switch Personal Computer or Handheld Computer incorporating wireless WAN

modem off, if instructed to do so by the guidelines posted in sensitive areas. Medical

equipment may be sensitive to RF energy.

The operation of cardiac pacemakers, other implanted medical equipment and hearing

aids can be affected by interference from Personal Computer or Handheld Computer

incorporating wireless WAN modem placed close to the device. If in doubt about po-

tential danger, contact the physician or the manufacturer of the device to verify that the

equipment is properly shielded. Pacemaker patients are advised to keep their Personal

Computer or Handheld Computer incorporating wireless WAN modem away from the

pacemaker, while it is on.

Switch off Personal Computer or Handheld Computer incorporating wireless WAN mo-

dem before boarding an aircraft. Make sure it cannot be switched on inadvertently. The

operation of wireless appliances in an aircraft is forbidden to prevent interference with

communications systems. Failure to observe these instructions may lead to the suspen-

sion or denial of cellular services to the offender, legal action, or both.

For details on usage of this unit in aircrafts please consult and follow instruction pro-

vided by the airline.

Read Me First

Do not operate Personal Computer or Handheld Computer incorporating wireless WAN

PRGHPLQWKHSUHVHQFHRIÀDPPDEOHJDVHVRUIXPHV6ZLWFKRIIWKHFHOOXODUWHUPLQDO

when you are near petrol stations, fuel depots, chemical plants or where blasting op-

erations are in progress. Operation of any electrical equipment in potentially explosive

atmospheres can constitute a safety hazard.

Your Personal Computer or Handheld Computer incorporating wireless WAN modem re-

ceives and transmits radio frequency energy while switched on. Remember that interfer-

ence can occur if it is used close to TV sets, radios, computers or inadequately shielded

equipment. Follow any special regulations and always switch off Personal Computer or

Handheld Computer incorporating wireless WAN modem wherever forbidden, or when

you suspect that it may cause interference or danger.

5RDGVDIHW\FRPHV¿UVW'RQRWXVHD3HUVRQDO&RPSXWHURU+DQGKHOG&RPSXWHULQ-

corporating wireless WAN modem while driving a vehicle. Do not place the computer

with wireless WAN modem in an area where it could cause personal injury to the driver

or passengers. It is recommended to stow the unit in the boot or secure stowage area

while driving.

Do not place the computer with wireless WAN modem in an area over an air bag or in

the vicinity where an air bag may deploy.

 $LUEDJVLQÀDWHZLWKJUHDWIRUFHDQGLIWKHFRPSXWHUZLWKZLUHOHVV:$1PRGHPLVSODFHG

in the air bag deployment area may be propelled with great force and cause serious

injury to occupants of the vehicle.

IMPORTANT!

Personal Computer or Handheld Computer incorporating wireless WAN modem operate

using radio signals and cellular networks cannot be guaranteed to connect in all condi-

tions. Therefore, you should never rely solely upon any wireless device for essential

communications, for example emergency calls.

Remember, in order to make or receive calls, Personal Computer or Handheld Comput-

er incorporating wireless WAN modem must be switched on and in a service area with

adequate cellular signal strength.

Some networks do not allow for emergency calls if certain network services or phone

IHDWXUHVDUHLQXVHHJORFNIXQFWLRQV¿[HGGLDOLQJHWF<RXPD\QHHGWRGHDFWLYDWH

those features before you can make an emergency call.

Some networks require that a valid SIM card be properly inserted in Personal Computer

or Handheld Computer incorporating wireless WAN modem.

CAUTION:

Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the

Instructions.

58-E-1

ATTENTION:

Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect.

Mettre au rebut les batteries usagées conformément aux instructions.

58-F-1

Camera Light

CAUTION

- The light from the LED is strong and can injure human eyes. Do not look directly at the LEDs

with naked eyes.

57-E-1

Read Me First

Regulatory Information

Federal Communications Commission

Radio Frequency Interference Statement

1RWH7KLVHTXLSPHQWKDVEHHQWHVWHGDQG

found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful in-

terference in a residential installation. This

equipment generates, uses and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio com-

munications. However, there is no guarantee

that interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or television re-

ception, which can be determined by turning

the equipment off and on, the user is encour-

aged to try to correct the interference by one

RUPRUHRIWKHIROORZLQJPHDVXUHV

z Reorient or relocate the receiving antenna.

z Increase the separation between the

equipment and receiver.

z Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

z Consult the Panasonic Service Center or

an experienced radio/TV technician for

help.

Warning

To assure continued compliance, use only

shielded interface cables when connecting to

a computer or peripheral. Also, any changes

RUPRGL¿FDWLRQVQRWH[SUHVVO\DSSURYHGE\

the party responsible for compliance could

void the user’s authority to operate this equip-

ment.

)&&5)([SRVXUH:DUQLQJ

z This equipment is provided with PC Card

slot that could be used with wireless trans-

PLWWHUVZKLFKZLOOEHVSHFL¿FDOO\UHFRP-

mended when they become available.

Other third-party wireless transmitters

have not been RF exposure evaluated for

use with this computer and may not com-

ply with FCC RF exposure requirements.

<Only for model with wireless LAN/wireless

WAN/Bluetooth>

z This equipment complies with FCC radia-

tion exposure limits set forth for an uncon-

trolled environment.

z This equipment may not be co-located or

operated with any other antenna or trans-

mitter.

z This device meets the government’s re-

quirements for exposure to radio waves.

This device is designed and manufactured

not to exceed the emission limits for expo-

sure to radio frequency (RF) energy set by

the Federal Communications Commission

of the U.S. Government.

z The exposure standard for wireless device

employs a unit of measurement known as

WKH6SHFL¿F$EVRUSWLRQ5DWHRU6$57KH

SAR limit set by the FCC is

1.6 W/kg.

* Tests for SAR are conducted using stan-

dard operating positions accepted by the

FCC with the device transmitting at its

KLJKHVWFHUWL¿HGSRZHUOHYHOLQDOOWHVWHG

frequency bands.

Although the SAR is determined at the

KLJKHVWFHUWL¿HGSRZHUOHYHOWKHDFWXDO

SAR level of the device while operating

can be well below the maximum value.

This is because the device is designed

to operate at multiple power levels so as

to use only the poser required to reach

the network. In general, the closer you

are to a wireless base station antenna,

the lower the power output.

This product is restricted to indoor use due

to its operation in the 5.15 to 5.25 GHz fre-

quency range. FCC requires this product to

be used indoors for the frequency range 5.15

to 5.25 GHz to reduce the potential for harm-

ful interference to co-channel Mobile Satellite

systems. High power radars are allocated

as primary users of the 5.25 to 5.35 GHz

and 5.65 to 5.85 GHz bands. These radar

stations can cause interference with and/or

damage this product. 25-M-W-1

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

WZRFRQGLWLRQV

(1) This device may not cause harmful inter-

ference, and

(2) This device must accept any interference

received, including interference that may

cause undesired operation.

5HVSRQVLEOH3DUW\3DQDVRQLF&RUSRUDWLRQRI

North America

One Panasonic Way

Secaucus, NJ 07094

 7HO1R/$3723

(1-800-527-8675)

6-M-1

For U.S.A.

Two Riverfront Plaza

Newark, NJ 07102

Read Me First

FCC RF Exposure Warning:

z This equipment is provided with external

antenna connector(s) for connection to

optional Car Mounter or Port Replicator

for mobile external mounted antenna(s).

External antenna(s) must be professionally

installed and cannot exceed recommended

maximum antenna gain as described in

individual provided supplement instructions

for wireless transmitters. The Car Mounter

is provided with Radiall/Larsen WLAN whip

antenna, type NMO5E2400BKTNC with

5dBi antenna gain. The maximum allow-

able antenna gain for the external WWAN

base whip antenna for the cellular band

is 4 dBi, PCS band is 3 dBi, LTE Band 4

is 3 dBi, LTE Band 17 is 9 dBi and 10 dBi

for LTE Band 13. Also, user must maintain

minimum 20 cm spacing between external

antenna(s) and all person’s body (excluding

extremities of hands, wrist and feet) during

wireless modes of operation.

32-M-1

86$2QO\'LVSRVDOPD\EHUHJXODWHGLQ\RXU

community due to environmental consider-

ations. For disposal or recycling information,

SOHDVHYLVLW3DQDVRQLFZHEVLWHKWWSZZZ

panasonic.com/environmental or call 1-888-

769-0149 65-M-2

This product contains a CR Coin Cell Lithium

Battery which contains Perchlorate Material -

special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/per-

chlorate/

38-M-1

A lithium ion battery that

is recyclable powers the

product you have pur-

chased.

Please call 1-800-8-BAT-

TERY for information on

how to recycle this bat-

tery.

L’appareil que vous vous

êtes procuré est alimen-

té par une batterie au

lithium-ion.

Pour des renseigne-

ments sur le recyclage

de la batterie, veuillez

composer le

1-800-8-BATTERY.

48-M-1

Read Me First

Regulatory Information

For Canada

Canadian ICES-003

CAN ICES-3(B)/NMB-3(B) 7-M-2

Industry Canada

This product complies with RSS210 Industry

Canada.

Operation is subject to the following two con-

ditions;

(1) this device may not cause interference,

and

(2) this device must accept any interference,

including interference that may cause un-

desired operation of the device.

<Ne s’applique qu’aux modèles avec techno-

ORJLH%OXHWRRWK/$1VDQV¿O!

Industrie Canada

Cet équipement est conforme à la norme

CNR-210

d’Industrie Canada. Son fonctionnement est

VRXPLVDX[GHX[FRQGLWLRQVVXLYDQWHV

(1) ce dispositif ne peut produire de brouillage,

(2) ce dispositif doit accepter le brouillage, y

compris le brouillage pouvant entraîner le

fonctionnement non désiré de l’appareil.

30-Ca-1-1

This product (local network devices) for the

band 5150-5250 MHz is only indoor usage

to reduce potential for harmful interference to

co-channel Mobile Satellite systems.

High power radars are allocated as primary

users (meaning they have priority) of 5250-

5350 MHz and 5650-5850 MHz and these

radars could cause interference and/or dam-

age to LELAN devices.

<Ne s’applique qu’aux modèles avec techno-

ORJLH/$1VDQV¿O!

Cet appareil (pour réseaux locaux radioé-

lectriques) dans les bandes de fréquences

5150-5250 MHz est réservé à une utilization

jO¶LQWpULHXUD¿QGHUpGXLUHOHULVTXHG¶LQWHU-

férence avec les systèmes satellites mobiles

bicanaux.

Les radars forte puissance sont désignés

comme étant les premiers utilisateurs (c’est-à-

dire qu’ils ont la priorité) des bandes de fré-

quences 5250-5350 MHz et 5650-5850 MHz.

Ces stations radars peuvent provoquer des

interférences et/ou des dommages à ce péri-

phérique. 30-Ca-2-1

<Only for model with wireless LAN/wireless

WAN/Bluetooth>

z This computer complies with Industry

Canada radiation exposure limits set forth

for an uncontrolled environment.

z This PC with WLAN and/or Bluetooth

transmitters installed, has been approved

for portable operation and does not require

any minimum spacing be provided be-

tween antennas and all person’s body.

<Ne s’applique qu’aux modèles avec techno-

ORJLH%OXHWRRWK/$1VDQV¿O:$1VDQV¿O!

z Cet équipement est conforme aux limites

d’exposition aux rayonnements d’Industrie

Canada établies pour un environnement

non contrôlé.

z Ce PC avec émetteurs WLAN et/ou Blue-

WRRWKDpWpDSSURXYpjGHV¿QVG¶RSpUDWLRQ

mobile; aucun espace minimum entre les

antennes et le corps de l’utilisateur n’est

requis.

This device has been designed to operate

with the Radiall/Larsen whip antenna, type

NMO5E2400BKTNC WLAN antenna having

a maximum gain of 5dB. A WLAN Antenna

having a higher gain is strictly prohibited per

regulations of Industry Canada. The Required

antenna impedance is 50 ohms.

To reduce potential radio interference to other

users, the antenna type and its gain should

be so chosen that the equivalent isotropically

radiated power (EIRP) is not more than that

required for successful communication.

Cet appareil est conçu pour opérer avec

l’antenne-fouet Radiall/Larsen, type WLAN

NMO5E2400BKTNC, ayant un gain maximum

de 5 dB. Les règlements d’Industrie Canada

interdisent l’utilisation d’une antenne WLAN

dont le gain serait supérieur à cette limite.

L’antenne doit avoir une impédance de 50

ohms.

$¿QGHUpGXLUHOHULVTXHG¶LQWHUIpUHQFHUD-

dioélectrique aux autres utilisateurs des

bandes de fréquences, le type d’antenne et

son gain doivent être tels que la puissance

isotrope rayonnée équivalente (PIRE) n’est

pas plus élevée que le niveau requis pour as-

surer la communication. 25-Ca-1-1

Read Me First

For India

For the purpose of recycling to facilitate effective utilization of resources, please return

this product to a nearby authorized collection center, registered dismantler or recycler,

or Panasonic service center when disposing of this product.

Please see the Panasonic website for further information on collection centers, etc.

KWWSZZZSDQDVRQLFFRLQZSVSRUWDOKRPH 68-M-1

<Only for model with wireless LAN/wireless

WAN/Bluetooth>

* This computer complies with Industry

Canada radiation exposure limits set forth

for an uncontrolled environment.

* This PC with WLAN and/or Bluetooth

transmitters installed, has been approved

for portable operation and does not require

any minimum spacing be provided between

antennas and all person’s body.

<Ne s’applique qu’aux modèles avec tech-

QRORJLH%OXHWRRWK/$1VDQV¿O:$1VDQV¿O!

* Cet équipement est conforme aux limites

d’exposition aux rayonnements d’Industrie

Canada établies pour un environnement non

contrôlé.

* Ce PC avec émetteurs WLAN et/ou

%OXHWRRWKDpWpDSSURXYpjGHV¿QV

d’opération mobile; aucun espace minimum

entre les antennes et le corps de l’utilisateur

n’est requis..

This device has been designed to operate

with the WWAN antenna having a maxi-

mum gain of 4 dBi for Cellular band, 3 dBi

for the PCS band and 5.5 dBi for LTE Band

4. WWAN Antenna having a higher gain is

strictly prohibited per regulations of Industry

Canada. The Required antenna impedance is

50 ohms.

To reduce potential radio interference to other

users, the antenna type and its gain should

be so chosen that the equivalent isotropically

radiated power (EIRP) is not more than that

required for successful communication.

Cet appareil est conçu pour opérer avec une

DQWHQQH::$1UpVHDXpWHQGXVDQV¿OGRQW

OHJDLQPD[LPXPHVW¿[pj>;@SRXUODEDQGH

cellulaire et à 4 dBi pour la bande cellulaire,

3 dBi pour la bande PCS et 5.5 dBi pour la

bande LTE Band 4. Les règlements d’Industrie

Canada interdisent l’utilisation d’une antenne

WWAN dont le gain serait supérieur à cette

limite. L’antenne doit avoir une impédance de

50 ohms.

$¿QGHUpGXLUHOHULVTXHG¶LQWHUIpUHQFHUD-

dioélectrique aux autres utilisateurs des

bandes de fréquences, le type d’antenne et

son gain doivent être tels que la puissance

isotrope rayonnée équivalente (PIRE) n’est

pas plus élevée que le niveau requis pour as-

surer la communication. 32-Ca-1-1

)2586(:,7+02'(/12&)$$&

328587,/,6(5$9(&02'Ê/(&)$$&

20-Ca-1

Bluetooth>

Getting Started

Thank you for purchasing this Panasonic product. For optimum performance and safety, please

read these instructions carefully.

In these instructions, the names are referred as follows.

indicates Windows® 8 Operating System.

indicates Windows® 7 Operating System.

 Terms and illustrations in these instructions

CAUTION  &RQGLWLRQVWKDWPD\UHVXOWLQPLQRURUPRGHUDWHLQMXU\

NOTE  8VHIXODQGKHOSIXOLQIRUPDWLRQ

Enter

 3UHVV>(QWHU@NH\

Alt

Del

 3UHVVDQGKROG>$OW@NH\DQGWKHQSUHVV>'HO@NH\

Î 3DJHLQWKHVH2SHUDWLQJ,QVWUXFWLRQVRULQWKH5HIHUHQFH0DQXDO

 5HIHUHQFHWRWKHRQVFUHHQPDQXDOV

Display “Charm” Flick from right side to inside of the screen.

7RXFK>&KDUP@

 7KLVLOOXVWUDWLRQPHDQVWRWRXFK

(Settings) in the Charm menu.

6WDUW>$OO3URJUDPV@ 7RXFK

6WDUWDQGWKHQWRXFK>$OO3URJUDPV@

z 6RPHLOOXVWUDWLRQVDUHVLPSOL¿HGWRKHOS\RXUXQGHUVWDQGLQJDQGPD\ORRNGLIIHUHQWIURPWKH

actual unit.

z If you do not log on as an administrator, you cannot use some functions or cannot display

some screens.

z Refer for the latest information about optional products to the catalogs, etc.

z In these instructions, the names and terms are referred as follows.

y “Windows® 8 Pro 64-bit” as “Windows” or “Windows 8”

y “Windows® 7 Professional 32-bit Service Pack 1” and “Windows® 7 Professional 64-bit Ser-

vice Pack 1” as “Windows” or “Windows 7”

y DVD MULTI drive as “DVD drive”

6FUHHQPHVVDJHVDUHH[SODLQHGLQ>(QJOLVK8QLWHG6WDWHV@

(Depending on the language preference, some screen messages in these instructions are dif-

IHUHQWIURPWKHDFWXDOVFUHHQPHVVDJHV)RUH[DPSOH>)OLJKWPRGH@PD\EHGLVSOD\HGLQVWHDG

RI>$LUSODQHPRGH@LQVRPHODQJXDJHSUHIHUHQFH

 Disclaimer

&RPSXWHUVSHFL¿FDWLRQVDQGPDQXDOVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH3DQDVRQLF&RUSRUD-

tion assumes no liability for damage incurred directly or indirectly from errors, omissions or dis-

crepancies between the computer and the manuals.

 Trademarks

Microsoft®, Windows®, and the Windows logo are registered trademarks of Microsoft Corporation

of the United States and/or other countries.

Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corpo-

ration.

microSDXC Logo is a trademark of SD-3C, LLC.

Introduction

Getting Started

Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of

Adobe Systems Incorporated in the United States and/or other countries.

Bluetooth® is a registered trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Pana-

sonic Corporation.

+'0,WKH+'0,/RJRDQG+LJK'H¿QLWLRQ0XOWLPHGLD,QWHUIDFHDUHWUDGHPDUNVRUUHJLVWHUHG

trademarks of HDMI Licensing LLC in the United States and other countries.

Names of products, brands, etc., appearing in this manual are trademarks or registered trade-

marks of their respective own companies.

 On-screen Manual

For further information about the computer, you can refer to the on-screen manual.

zReference Manual

The Reference Manual contains the practical information to help you fully enjoy the comput-

er’s performance.

zImportant Tips

The Important Tips will provide you with the battery information so that you can use the battery

pack in the optimum condition to obtain longer operation time.

To access the on-screen manuals, follow the steps below.

2QWKH6WDUWVFUHHQWRXFKWKH>0DQXDO6HOHFWRU@WLOHDQGVHOHFWWKHRQVFUHHQPDQXDO

'RXEOHWRXFK>0DQXDO6HOHFWRU@RQWKHGHVNWRSVFUHHQDQGVHOHFWWKHRQVFUHHQPDQXDO

Getting Started

First-time Operation

5 Setup Windows.

Follow the on-screen instructions.

z The computer restarts several times. Do not touch the screen

or tablet buttons, and wait until the drive indicator

has

turned off.

z After the computer is turned on, the screen remains black or

unchanged for a while, but this is not a malfunction. Wait for

a moment until the Windows setup screen appears.

z Setup of Windows will take approximately 5 min-

utes / 20 minutes.



*RWRWKHQH[WVWHSFRQ¿UPLQJHDFKPHVVDJHRQWKHGLVSOD\

z Follow the steps below.



AWhen “Enable sensors” is displayed, touch>(QDEOHWKLV

VHQVRU@



B:KHQWKH>8VHU$FFRXQW&RQWURO@VFUHHQLVGLVSOD\HG

touch><HV@



C$WWKH>'LVSOD\5RWDWLRQ7RRO@FRQ¿UPDWLRQVFUHHQWouch

><HV@



The computer restarts automatically, and the setting is en-

abled.

z “Join a wireless network” screen may not ap-

pear.

You can set the Wireless Network after the setup of Windows

is complete.

CAUTION

z You can change the user name, password, image and security

setting after setup of Windows.

z Remember your password. If you forget the password, you can-

not use Windows. Creating a password reset disk beforehand is

recommended.

z 'RQRWXVHWKHIROORZLQJZRUGVIRUXVHUQDPH&21351

AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &,

space. In particular, if you create a user name (account name)

that includes the “@” mark, a password will be requested at the

log-on screen, even if no password has been set. If you try to

log on without entering a password, “The user name or pass-

word is incorrect.” may be displayed and you will not be able

to sign in / log on to Windows (Î

page 35).

6 Create the recovery disc.

A recovery disc allows you to install OS and restore its factory

default condition, in case, for example, the recovery partition

RIWKHÀDVKPHPRU\LVGDPDJHG:HUHFRPPHQGFUHDWLQJD

recovery disc before you begin using the computer.

Refer to ÎReference Manual “Recovery Disc Creation Util-

ity” about creating the disc.

Getting Started

Turning On

Press and hold the power switch

(Î page 16) until the power indicator (Î page 16)

lights.

NOTE

z Do not press the power switch repeatedly.

z The computer will forcibly be turned off if you press and hold the power switch for four sec-

onds or longer.

z Once you turn off the computer, wait for ten seconds or more before you turn on the computer

again.

z Do not perform the following operation until the drive indicator

turns off.

y Connecting or disconnecting the AC adaptor

y Pressing the power switch

y Touching the tablet buttons, screen or external mouse/keyboard

Turning Off

A Shut down the computer.

1. Display “Charm” and touch .

2. Touch>3RZHU@>6KXW GRZQ@

Touch

6WDUW>6KXWGRZQ@

NOTE

To turn off the computer, proceed as follows.

A Display “Charm” and touch - >&KDQJH3&VHWWLQJV@>*HQHUDO@

B Touch>5HVWDUWQRZ@XQGHU³$GYDQFHGVWDUWXS´

C Touch>7XUQRII\RXU3&@

Precaution against Starting Up/Shutting Down

z Do not do the following

y Connecting or disconnecting the AC adaptor

y Pressing the power switch

y Touching the screen or external mouse/keyboard

NOTE

z To conserve power, the following power saving methods are set at the time of purchase.

y TKHVFUHHQDXWRPDWLFDOO\WXUQVRIIDIWHU

10 minutes (when AC adaptor is connected) of inactivity

5 minutes (when operating on battery power) of inactivity

y The computer automatically enters sleep*1DIWHU

30 minutes / 20 minutes (when AC adaptor is connected) of inac-

tivity

15 minutes (when operating on battery power) of inactivity

*1 Refer to Reference Manual “Sleep and Hibernation Functions” about resuming from sleep.

Turning On / Turning Off

Useful Information

Operation environment

z 3ODFHWKHFRPSXWHURQDÀDWVWDEOHVXUIDFHQRWVXEMHFWWRVKRFNYLEUDWLRQDQGGDQJHURI

dropping. Do not place the computer upright or turn it over. If the computer is exposed to an

extremely strong impact, it may become damaged.

z Operating environment

 7HPSHUDWXUH2SHUDWLRQ°C to 50 °C {14 °F to 122 °F} (IEC60068-2-1, 2)*1

  6WRUDJH°C to 60 °C {-4 °F to 140 °F}

 +XPLGLW\ 2SHUDWLRQ% to 80% RH (No condensation)

  6WRUDJH% to 90% RH (No condensation)

Even within the above temperature/humidity ranges, operation for a long time in extreme en-

vironments, smoking nearby, or operation in places where oil is used or where there is a lot of

dust will result in the product deterioration and will shorten the product life.

*1 Do not expose the skin to this product when using the product in a hot or cold environment. (Î

page 5)

If the computer is wet in temperatures of 0 °C {32 °F} or below, freeze damage may occur.

Make sure to dry off the computer in such temperatures.

z Do not place the computer in the following areas, otherwise the computer may be damaged.

y Near electronic equipment. Image distortion or noise may occur.

y In extremely high or low temperature.

z As the computer can become hot during operation, keep it away from items that are sensitive

to heat.

Handling cautions

7KLVFRPSXWHULVGHVLJQHGWRPLQLPL]HVKRFNWRSDUWVVXFKDVWKH/&'DQGWKHÀDVKPHPRU\

drive, but no warranty is provided against any trouble caused by shock. Be extremely careful

when handling the computer.

z :KHQFDUU\LQJWKHFRPSXWHU

y Turn off the computer.

y Remove all external devices, cables, Smart Cards and other protruding objects.

y Do not drop or hit the computer against solid objects.

y Do not grip the display part.

z When you board an airplane, take the computer with you and never put it in your checked lug-

gage. When using the computer on airplane, follow the airline’s instructions.

z When carrying a spare battery, put it in a plastic bag to protect its terminals.

z Avoid any harmful substances such as oil from getting into the touch pad. The pointer may not

work correctly.

z Be careful not to get injured by dropping or getting hit when carrying the computer.

z Use only the included digitizer pen to touch the screen. Do not place any object on its surface

and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g.,

nails, pencils and ball point pens).

Do not use the screen when dust or dirt (e.g., oil) is on the screen. Otherwise foreign particles on

the screen/digitizer pen can scratch the screen surface or obstruct the digitizer pen operation.

z Use the digitizer pen only for touching the screen. Using it for any other purpose may damage

the digitizer pen and result in scratches on the screen.

z The digitizer uses electromagnetic induction and may not work properly near strong electrical

¿HOGRUPDJQHWLF¿HOGVXFKDV

y Near AM radio base station or relay station antennas

y1HDU&57GLVSOD\VWKDWJHQHUDWHVWURQJHOHFWURPDJQHWLF¿HOGQRLVH

Move the digitizer away from such locations so it will work properly.

z The pointer cannot follow the digitizer pen movement if you move the digitizer pen too quickly.

Handling and Maintenance

Useful Information

Handling and Maintenance

 When the battery indicator does not light on

The battery indicator may not light on even if the AC adaptor and the battery pack are correctly

connected to the computer, due to the following reasons.

z The AC adaptor’s protection function may be working. In this case, pull out the AC cord and

wait for more than 1 minute before reconnecting the AC cord.

 When using peripheral devices

Follow these instructions and the Reference Manual to avoid any damage to the devices. Care-

fully read the instruction manuals of the peripheral devices.

z 8VHWKHSHULSKHUDOGHYLFHVFRQIRUPLQJWRWKHFRPSXWHU¶VVSHFL¿FDWLRQV

z Connect to the connectors in the correct direction.

z If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of

pins, etc.

z If screws are included, fasten them securely.

z Remove the cables when you carry the computer. Do not pull the cables forcibly.

Preventing your computer from unauthorized use via wireless LAN/Bluetooth/Wireless

WAN

Before using wireless LAN/Bluetooth/Wireless WAN, make the appropriate security settings

such as data encryption.

 Battery Recalibration

z The battery recalibration may take a long time due to the large battery capacity. This is not a

malfunction.

<When performing “Battery Recalibration” after shutting down Windows>

y)XOOFKDUJH$SSUR[LPDWHO\KRXUV

&RPSOHWHGLVFKDUJH$SSUR[LPDWHO\KRXUV



When performing “Battery Recalibration” without shutting down Windows, it may take more time to

charge / discharge.

 Sensors

This computer is equipped with four sensors (acceleration sensor, gyro sensor, magnetic sensor,

ambient light sensor), and you can use these sensors with any software that is compatible.

As the accuracy of each sensor output is dependent on the operating environment and other con-

ditions, the results should only be used as a reference.

The acceleration sensor, gyro sensor, and magnetic sensor are located at the bottom left of the

LCD. The detection results of each sensor may vary depending on how you are holding the com-

puter, the application software you are using, and other factors.

zAutomatic brightness adjustment

The computer is equipped with an automatic brightness adjustment function that adjusts the

GLVSOD\VFUHHQEDVHGRQWKHDPELHQWOLJKWVHQVRU<RXFDQFRQ¿JXUHWKHDXWRPDWLFDGMXVWPHQW

function as follows.

ADisplay “Charm” and touch >&KDQJH3&6HWWLQJV@>*HQHUDO@>6FUHHQ@>$GMXVWP\

VFUHHQEULJKWQHVVDXWRPDWLFDOO\@

A Touch

6WDUW>&RQWURO3DQHO@>+DUGZDUHDQG6RXQG@>3RZHU2SWLRQ@

B 7RXFK>&KDQJHSODQVHWWLQJV@IRUWKHSRZHUSODQFXUUHQWO\XVHG

Useful Information

C 7RXFK>&KDQJHDGYDQFHGSRZHUVHWWLQJV@DQGGRXEOHWRXFK>'LVSOD\@

D 'RXEOHWRXFK>(QDEOHDGDSWLYHEULJKWQHVV@PDNHQHFHVVDU\VHWWLQJVDQGWRXFK>2.@

Set each item to ON, and the brightness of the screen display will adjust automatically.

The ambient light sensor is located at the top of LCD.

The ambient light cannot be detected properly if this area is obstructed or dirty.

zMagnetic sensor

The magnetic sensor on the computer operates by detecting geomagnetism. Therefore, the

magnetic sensor may not function properly and it readings may be inaccurate, especially in

the following environments.

y Inside or near steel structures such as buildings or bridges

y Inside or near automobiles, or near train power lines

y Near metallic furniture or appliances

y When the AC adaptor or other peripheral devices are brought closer to the computer

y1HDUPDJQHWVVSHDNHUVRURWKHUREMHFWVZLWKVWURQJPDJQHWLF¿HOGV

The magnetic directions indicated by the magnetic sensor may not be accurate immediately

DIWHUSXUFKDVHRULQHQYLURQPHQWVZLWKSRRUPDJQHWLF¿HOGV

In such cases, turn on the computer and move it as follows.

A Hold the computer so that its screen side is facing upward and level.

B While keeping the computer level, rotate it 90 degrees or more clockwise.

C Return the computer to position A, and rotate it 90 degrees or more counterclockwise.

D Return the computer to position A.

ETilt the computer 90 degrees or more to the left so that the left side of the computer tilts

down.

FReturn the computer to position A, and tilt it 90 degrees or more to the right so that the

right side of the computer tilts down.

CAUTION

 Ɣ+ROGWKHFRPSXWHU¿UPO\ZKHQPRYLQJLW6WURQJVKRFNVIURPGURSSLQJWKHFRPSXWHUPD\

result in damage.

Useful Information

Handling and Maintenance

Maintenance

If drops of water or other stains get on the surface of the LCD panel, wipe them off immediately.

Failure to do so may result in staining.

To clean the LCD panel

Use the soft cloth included with the computer. (For further information, refer to “Suggestions

About Cleaning the LCD Surface” ÎReference Manual “Screen Input Operation”.)

To clean areas other than the LCD panel

Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted

detergent and wring it thoroughly.

CAUTION

z Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface caus-

ing discoloration, etc. Do not use commercially-available household cleaners and cosmetics,

as they may contain components harmful to the surface.

z Do not apply water or detergent directly to the computer, since liquid may enter inside of the

computer and cause malfunction or damage.

To clean inside of the dust cover

Approximately once a month, clean up inside of the dust cover by the following procedure.

A Turn off the computer and remove the AC adaptor.

B Remove the battery pack.

C Remove the screw (A) and dust cover as illustrated below.

㪘

D Clean up inside of the dust cover.

E Set the dust cover, screw and battery pack.

Useful Information

Installing software will return the computer to the default condition. When you install the soft-

ZDUHWKHÀDVKPHPRU\GDWDZLOOEHHUDVHG

Back up important data to other media or an external hard disk before installation.

CAUTION

z'RQRWGHOHWHWKH5HFRYHU\3DUWLWLRQRQWKHÀDVKPHPRU\7KHGLVNVSDFHLQWKHSDUWLWLRQLV

not available to store data.

To check the Recovery Partition, perform the following methods.

A

 Open “Computer”. Long touch>&RPSXWHU@WKHQWouch>0DQDJH@

 To open “Computer”, proceed as follows on the Start screen.

1. On the Start screen,ÀLFNIURPULJKWVLGHWRLQVLGHRIWKHVFUHHQ.

2. Touch>$OODSSV@RQWKHWRROEDU

3. Touch>&RPSXWHU@XQGHU³:LQGRZV6\VWHP´



Touch

(Start) and long touch>&RPSXWHU@WKHQWouch>0DQDJH@

 z A standard user needs to enter an administrator password.

B7RXFK>'LVN0DQDJHPHQW@

 Flash memory Recovery

You can reinstall the OS that was pre-installed at the time of purchase (Windows 8 or Windows 7).

Preparation

z Connect the external keyboard.

z Remove all peripherals.

z Connect the AC adaptor and do not remove it until installation is complete.

1 Perform “Remove everything and reinstall Windows”.

A Display “Charm” and touch

>&KDQJH3&VHWWLQJV@>*HQHUDO@

B7RXFK>*HW6WDUWHG@XQGHU³5HPRYHHYHU\WKLQJDQGUHLQVWDOO:LQGRZV´

Installation starts according to the instructions on the screen. (It will take approximately

20 minutes.)

z Do not interrupt installation, for example by turning off the computer or performing other

operation.

Otherwise installation may become unavailable as Windows may not start up or the

data may be corrupted.

2 When termination screen is displayed, touch [OK] to turn off the com-

puter.

3 Turn on the computer.

z If the password is requested, enter the Supervisor Password.

4 Perform the “First-time Operation” (Î page 20).

5 Start the Setup Utility and change the settings as necessary.

6 Perform Windows Update.

7 <Only for model with TPM> Clear TPM.

A2QWKH6WDUWVFUHHQÀLFNIURPERWWRPVLGHWRLQVLGHRIWKHVFUHHQDQGWRXFK>$OODSSV@

on the toolbar.

B7RXFK>5XQ@XQGHU³:LQGRZV6\VWHP´LQSXW>WSPPVF@DQGWRXFK>2.@

C7RXFK>&OHDU730@XQGHU³$FWLRQV´RQWKHULJKWRIWKH³7300DQDJHURQ/RFDO&RP-

puter” screen.

Installing Software

Useful Information

Installing Software

D7RXFK>5HVWDUW@RIWKH³0DQDJHWKH730VHFXULW\KDUGZDUH´VFUHHQ

The computer will restart.

E:KHQ³730FRQ¿JXUDWLRQFKDQJHZDVUHTXHVWHGWR´LVGLVSOD\HGSUHVV

F12

Windows will start.

F:KHQ³730LVUHDG\´DSSHDUVWRXFK>&ORVH@

1 Turn on the computer, and press

Del

while [Panasonic] boot

screen is displayed.

The Setup Utility starts up.

z ,IWKH>3DQDVRQLF@ERRWVFUHHQLVQRWGLVSOD\HGWXUQRQWKHFRPSXWHUZKLOHKROGLQJGRZQ

Del

z If the password is requested, enter the Supervisor Password.

2 Write down all of the contents of the Setup Utility and press

$WWKHFRQ¿UPDWLRQPHVVDJHVHOHFW><HV@DQGSUHVV

Enter

3 Press

F10

$WWKHFRQ¿UPDWLRQPHVVDJHVHOHFW><HV@DQGSUHVV

Enter

Computer will restart.

4 Press

Del

while [Panasonic] boot screen is displayed.

The Setup Utility starts up.

z If the password is requested, enter the Supervisor Password.

Select the [Exit] menu, then select [Recovery Partition] and press

Enter

6 Touch [Reinstall Windows] and touch [Next].

The License Agreement screen appears.

7 Touch [YES].

The License Agreement screen appears.

8 Touch [Yes, I agree to the provisions above and wish to continue!] and

touch [Next].

9 Select the setting and touch [Next].

z >5HLQVWDOO:LQGRZVWRWKHZKROH+DUG'LVNWRIDFWRU\GHIDXOW@

Select this option when you want to install Windows to the factory default. After instal-

lation, you can create a new partition. For how to create a new partition, refer to “To

change the partition structure” (Î page 21).

z >5HLQVWDOOWRWKH6\VWHPDQG26SDUWLWLRQV@*1

6HOHFWWKLVRSWLRQZKHQWKHÀDVKPHPRU\KDVDOUHDG\EHHQGLYLGHGLQWRVHYHUDOSDUWL-

tions. For how to create a new partition, refer to “To change the partition structure” (Î

page 21

You can keep the partition structure.

*1 This does not appear if Windows cannot be installed to the recovery partition and the area us-

able by Windows.

 $WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><(6@

11 Select OS (32bit or 64bit) and touch [OK].

 $WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><(6@

Installation starts according to the instructions on the screen. (It will take approximately 20

minutes.)

z Do not interrupt installation, for example by turning off the computer or pressing

Ctrl

Alt

Del

Useful Information

Otherwise installation may become unavailable as Windows may not start up or the

data may be corrupted.

13 When Ending process screen is displayed, touch [OK] to turn off the

computer.

14 Turn on the computer.

z If the password is requested, enter the Supervisor Password.

15 Perform the “First-time Operation” (Î page 20).

16 Start the Setup Utility and change the settings as necessary.

17 Perform Windows Update.

 Using Recovery Disc

Use the Recovery Disc in the following conditions.

y You have forgotten the administrator password.

y ,QVWDOODWLRQLVQRWFRPSOHWH7KHUHFRYHU\SDUWLWLRQLQWKHÀDVKPHPRU\PD\EHEURNHQ

y <Only for Windows 7 downgrade model>

To change OS from Windows 7 to Windows 8, or vice versa.

NOTE

z To change OS from 32 bit to 64 bit, or vice versa, install OS using the recovery

SDUWLWLRQLQWKHÀDVKPHPRU\

Preparation

z 3UHSDUHWKHIROORZLQJLWHPV

• Recovery Disc (ÎReference Manual “Recovery Disc Creation Utility”)

• USB DVD drive (optional) (refer to recent catalogs and other sources for information

about the products available)

z Remove all peripherals (except for the USB DVD drive).

z Connect the AC adaptor and do not remove it until installation is complete.

NOTE

z You can use the following buttons instead of the keyboard.

)NH\'HIDXOWVHWWLQJ

ĻNH\

ĹNH\

(QWHUNH\

7DENH\

1 Connect the DVD drive to the USB port.

2 Start the Setup Utility.

A Display “Charm” and touch

>&KDQJH3&VHWWLQJV@>*HQHUDO@

B7RXFK>5HVWDUWQRZ@XQGHU³$GYDQFHGVWDUWXS´

C7RXFK>7URXEOHVKRRW@>$GYDQFHGRSWLRQV@>8(),)LUPZDUH6HWWLQJV@>5HVWDUW@

7XUQRQWKHFRPSXWHUDQGWRXFKWRSOHIWRIWKHVFUHHQZKLOH>3DQDVRQLF@ERRWVFUHHQLV

displayed.

z ,IWKH>3DQDVRQLF@ERRWVFUHHQLVQRWGLVSOD\HGWXUQRQWKHFRPSXWHUZKLOHWRXFKLQJWRS

left of the screen.

Useful Information

Installing Software

z If the password is requested, enter the Supervisor Password.

3 Write down all of the contents of the Setup Utility and touch [Exit] and

double-touch [Load Default Values].

$WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><HV@

4 Check the [UEFI Boot] setting of the Setup Utility.

>8(),%RRW@VKRXOGEHVHWWRDVIROORZV

:KHQWKHUHFRYHU\GLVFIRU:LQGRZVLVXVHG>(QDEOHG@

:KHQWKHUHFRYHU\GLVFIRU:LQGRZVLVXVHG>'LVDEOHG@

5 Set the Recovery Disc into the DVD drive.

6 Touch [Exit] and double-touch [Save Values and Reboot].

$WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><HV@

Computer will restart.

7 Touch top left of the screen while [Panasonic] boot screen is dis-

played.

The Setup Utility starts up.

z If the password is requested, enter the Supervisor Password.

8 Touch [Exit], then double-touch your DVD drive in [Boot Override].

9 Double-touch [Yes].

The computer will restart.

10 Touch [Reinstall Windows] and touch [Next].

11 $WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><(6@

12 At the License Agreement screen, Touch [Yes, I agree to the provi-

sions above and wish to continue!] and touch [Next].

13 When the recovery disc for Windows 8 is used, touch [Next].

When the recovery disc for Windows 7 is used, select the setting and

touch [Next].

z>5HLQVWDOO:LQGRZVWRWKHZKROH+DUG'LVNWRIDFWRU\GHIDXOW@

Select this option when you want to install Windows to the factory default. After instal-

lation, you can create a new partition. For how to create a new partition, refer to “To

change the partition structure” (Îpage 21).

z >5HLQVWDOOWRWKH6\VWHPDQG26SDUWLWLRQV@*2

Select this option when the Àash memory has already been divided into several parti-

tions. For how to create a new partition, refer to “To change the partition structure” (Î

page 21).

You can keep the partition structure.

*2 This does not appear if Windows cannot be installed to the recovery partition and the area us-

able by Windows.

 $WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><(6@

Installation starts according to the instructions on the screen. (It will take approximately 30

- 45 minutes.)

z Do not interrupt installation, for example by turning off the computer.

Otherwise installation may become unavailable as Windows may not start up or the

data may be corrupted.

15 When Ending process screen is displayed, remove the Recovery Disc

and DVD Drive.

Useful Information

16 Touch [OK].

The computer will restart.

Touch [OK] to turn off the computer.

17 Turn on the computer.

z If the password is requested, enter the Supervisor Password.

18 Perform the “First-time Operation” (Î page 20).

19 Start the Setup Utility and change the settings as necessary.

20 Perform Windows Update.

21 <Only for model with TPM> Clear TPM (Î page 27).

Panasonic System Communications

Company of North America

Two Riverfront Plaza,

Newark NJ 07102

Panasonic Australia Pty. Limited

ACN 001 592 187 ABN 83 001 592 187

1 Innovation Road, Macquarie Park NSW 2113

:HE6LWHKWWSSDQDVRQLFQHW

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga,

Ontario L4W 2T3

Printed in Taiwan

TA0113-2053

DFQW5716XAT

Two Riverfront Plaza

Newark, NJ 07102

@@0813-0

DFQW5829ZA

User Manual 2

Contents

OPERATING INSTRUCTIONS

Personal Computer

Introduction ....................................................14

Description of Parts .......................................16

First-time Operation .......................................18

Turning On / Turning Off ................................22

Useful Information

Handling and Maintenance ............................23

Installing Software .........................................27

Please read these instructions carefully before using this product, and save this manual for future use.

Getting Started

Useful Information

Troubleshooting

Read Me First

Getting Started

Safety Precautions .......................................... 2

Regulatory Information .................................... 7

Read Me First

Model No.

FZ-Y1series

Read Me First

Safety Precautions

To reduce the risk of injury, loss of life, elec-

WULFVKRFN¿UHPDOIXQFWLRQDQGGDPDJHWR

equipment or property, always observe the

following safety precautions.

Explanation of symbol word panels

The following symbol word panels are used

to classify and describe the level of hazard,

injury, and property damage caused when the

denotation is disregarded and improper use is

performed.

DANGER

Denotes a potential hazard that will result in

serious injury or death.

WARNING

Denotes a potential hazard that could result

in serious injury or death.

CAUTION

Denotes a hazard that could result in minor

injury.

NOTICE

Denotes a hazard that could result in prop-

erty damage.

The following symbols are used to classify

and describe the type of instructions to be

observed.

These symbols are used to alert users

WRDVSHFL¿FRSHUDWLQJSURFHGXUHWKDW

must not be performed.

This symbol is used to alert users to

DVSHFL¿FRSHUDWLQJSURFHGXUHWKDW

must be followed in order to operate

the unit safety.

DANGER

Precautions on the Battery Pack

Do Not Throw the Battery Pack into

a Fire or Expose It to Excessive Heat

Generation of heat, ignition or rupture

may result.

Do Not Insert Sharp Objects Into

the Battery Pack, Disassemble, or

Modify It

Electrolyte leakage, generation of heat,

ignition or rupture may result.

Do Not Short the Positive (+) and

Negative (-) Contacts

Generation of heat, ignition or rupture

may result.

•Do not place the battery pack to-

gether with articles such as neck-

laces or hairpins when carrying or

storing.

Avoid Extreme Heat (Near the Fire,

in Direct Sunlight, for Example)

Electrolyte leakage, generation of heat,

ignition or rupture may result.

Do Not Apply Shocks to the Prod-

uct by Dropping It, Applying Strong

Pressure to It, etc.

Electrolyte leakage, generation of heat,

ignition or rupture of the battery may

result.

•If this product is subjected to a

strong impact, damaged or de-

formed, stop using it immediately.

Do Not Charge the Battery Using

Methods Other Than Those Speci-

¿HG

If the battery is not charged using one

RIWKHVSHFL¿HGPHWKRGVHOHFWURO\WH

leakage, generation of heat, ignition or

rupture may result.

When the Battery Pack Has Deterio-

rated, Replace It With a New One

Continued use of a damaged battery

pack may result in heat generation,

ignition or battery rupture.

Read Me First

DANGER

Precautions on the Battery Pack

Do Not Use with Any Other Product

The battery pack is rechargeable and

ZDVLQWHQGHGIRUWKHVSHFL¿HGSURGXFW

If it is used with a product other than

the one for which it was designed,

electrolyte leakage, generation of heat,

ignition or rupture may result.

Do Not Use This Product with a Bat-

tery Pack Other Than the One Speci-

¿HG

8VHRQO\WKHVSHFL¿HGEDWWHU\SDFN

(Ä page 18) with your product.

Use of battery packs other than those

manufactured and supplied by Pana-

sonic may present a safety hazard

(generation of heat, ignition or rupture).

WARNING

If a Malfunction or Trouble Occurs,

Immediately Stop Use

If a Malfunction Occurs, Immediately

Unplug the AC Plug and the Battery

Pack

•This product is damaged

•Foreign object inside this product

•Smoke emitted

•Unusual smell emitted

•Unusually hot

Continuing to use this product while

any of the above conditions are pres-

HQWPD\UHVXOWLQ¿UHRUHOHFWULFVKRFN

•If a malfunction or trouble occurs,

immediately turn the power off and

unplug the AC plug, and then re-

move the battery pack. Then con-

WDFW\RXUWHFKQLFDOVXSSRUWRI¿FHIRU

repair.

Do Not Touch This Product in a

Thunderstorm If Connected with the

AC Cable or Any Other Cables

Electric shock may result.

Do Not Connect the AC Adaptor to

a Power Source Other Than a Stan-

dard Household AC Outlet

2WKHUZLVHD¿UHGXHWRRYHUKHDWLQJ

may result. Connecting to a DC/AC

converter (inverter) may damage the

AC adaptor. On an airplane, only con-

nect the AC adaptor/charger to an AC

RXWOHWVSHFL¿FDOO\DSSURYHGIRUVXFK

use.

Do Not Pull or Insert the AC Plug If

Your Hands Are Wet

Electric shock may result.

Clean Dust and Other Debris of the

AC Plug Regularly

If dust or other debris accumulates

on the plug, humidity, etc. may cause

a defect in the insulation, which may

UHVXOWLQD¿UH

•Pull the plug, and wipe it with a dry

cloth.

Pull the plug if the computer is not

being used for a long period of time.

Insert the AC Plug Completely

If the plug is not inserted completely,

¿UHGXHWRRYHUKHDWLQJRUHOHFWULFVKRFN

may result.

•

Do not use a damaged plug or loose

AC outlet.

Close the Connector Cover Tightly

When Using This Product Where

Is a Lot of Water, Moisture, Steam,

Dust, Oily Vapors, etc.

The entry of foreign matter may cause

D¿UHRUHOHFWULFVKRFNV

•If foreign matter has found its way

inside, immediately turn the power

off and unplug the AC cord, and

then remove the battery pack. Then

contact your technical support of-

¿FH

Do Not Disassemble This Product

You may receive an electric shock, or

foreign matter may enter and result in

D¿UH

Read Me First

Safety Precautions

WARNING

Do Not Turn the Volume Up to Loud

When Using Headphones

Listening at high volumes that over-

stimulate the ear for long periods of

time may result in loss of hearing.

Do Not Use This Product in Close

Contact With Your Body for a Long

Period of Time

•Depending on the direction of the

computer or the way you hold the

computer, yourhands and body will

be more exposed to the hot wind.

•Using this product with exposing

the skin to the heat source of this

product or AC adaptor for a long

period of time can cause a low-

temperature burn.

Do Not Do Anything That May Dam-

age the AC Cord, the AC Plug, or the

AC Adaptor

Do not damage or modify the cord,

place it near hot tools, bend, twist, or

pull it forcefully, place heavy objects

on it, or bundle it tightly. Continuing to

XVHDGDPDJHGFRUGPD\UHVXOWLQ¿UH

short circuit, or electric shock.

Do Not Expose Yourself or Other

Persons to the Hot Wind from the

Ventilation Hole (Exhaust) For a

Long Period of Time

Low-temperature burns may result.

Covering the ventilation hole (exhaust)

with your hand or other object can

cause heat to build up inside, possibly

resulting in burns.

CAUTION

Do Not Place This Product on Un-

stable Surface

If balance is lost, this product may fall

over or drop, resulting in an injury.

Avoid Stacking

If balance is lost, this product may fall

over or drop, resulting in an injury.

Do Not Leave This Product in High

Temperature Environment for a

Long Period of Time

Leaving this product where it will be ex-

posed to extremely high temperatures

VXFKDVQHDU¿UHRULQGLUHFWVXQOLJKW

may deform the cabinet and/or cause

trouble in the internal parts. Continued

use in such a resulting condition may

lead to short-circuiting or insulation

defects, etc. which may in turn lead to

D¿UHRUHOHFWULFVKRFNV

Do Not Block the Ventilation Hole

(Exhaust/Intake)

Using this product wrapped in cloth

or on top of bedding or a blanket can

block the ventilation hole and cause

heat to build up inside, possibly result-

LQJLQD¿UH

Hold the Plug When Unplugging the

AC Plug

Pulling on the cord may damage the

FRUGUHVXOWLQJLQD¿UHRUHOHFWULF

shock.

Do Not Move This Product While the

AC Plug Is Connected

The AC cord may be damaged, result-

LQJLQ¿UHRUHOHFWULFVKRFN

•If the AC cord is damaged, unplug

the AC plug immediately.

8VH2QO\WKH6SHFL¿HG$&$GDSWRU

With This Product

Using an AC adaptor other than the

one supplied (supplied with the unit or

one sold separately as an accessory)

PD\UHVXOWLQD¿UH

Do Not Subject the AC Adaptor to

Any Strong Impact

Using the AC adaptor after a strong im-

pact such as being dropped may result

LQHOHFWULFVKRFNVKRUWFLUFXLWRU¿UH

Take a Break of 10-15 Minutes Every

Hour

Using this product for long periods of

time may have detrimental health ef-

fects on the eyes or hands.

Read Me First

CAUTION

Do Not Connect a Telephone Line,

or a Network Cable Other Than the

2QH6SHFL¿HGLQWRWKH/$13RUW

If the LAN port is connected to a net-

work such as the ones listed below, a

¿UHRUHOHFWULFVKRFNPD\UHVXOW

•Networks other than 1000BASE-T,

100BASE-TX or 10BASE-T

•Phone lines (IP phone (Internet Pro-

tocol Telephone), Telephone lines,

internal phone lines (on-premise

switches), digital public phones,

etc.)

Do Not Expose the Skin to This

Product When Using the Product In

a Hot or Cold Environment.

Burns, low-temperature burns or frost-

bite may result.

•When it is necessary to expose the

skin to this product such as to scan

D¿QJHUSULQWSHUIRUPWKHRSHUDWLRQ

in the shortest time possible.

NOTICE

z Do not place the computer near a televi-

sion or radio receiver.

z Keep the computer away from magnets.

'DWDVWRUHGRQWKHÀDVKPHPRU\PD\EH

lost.

z This computer is not intended for the dis-

play of images for use in medical diagno-

sis.

z This computer is not intended for a use

with connection of medical equipment for

the purpose of medical diagnosis.

z Panasonic shall not be liable for loss of

data or other incidental or consequential

damages resulting from the use of this

product.

z Do not touch the terminals on the battery

pack. The battery pack may no longer

function properly if the contacts are dirty or

damaged.

z Do not expose the battery pack to water,

or allow it to become wet.

z If the battery pack will not be used for a

long period of time (a month or more),

charge or discharge (use) the battery pack

until the remaining battery level becomes

30% to 40% and store it in a cool, dry

place.

z This computer prevents overcharging of

the battery by recharging only when the

remaining power is less than approx. 95%

of capacity.

z The battery pack is not charged when the

FRPSXWHULV¿UVWSXUFKDVHG%HVXUHWR

FKDUJHLWEHIRUHXVLQJLWIRUWKH¿UVWWLPH

When the AC adaptor is connected to the

computer, charging begins automatically.

z 6KRXOGWKHEDWWHU\OHDNDQGWKHÀXLGJHW

into your eyes, do not rub your eyes. Im-

PHGLDWHO\ÀXVK\RXUH\HVZLWKFOHDUZDWHU

and see a doctor for medical treatment as

soon as possible.

NOTE

z The battery pack may become warm dur-

ing recharging or normal use. This is com-

pletely normal.

z Recharging will not commence if internal

Read Me First

Safety Precautions

temperature of the battery pack is outside

of the allowable temperature range (0 °C to

50 °C {32 °F to 122 °F}). (ÄReference

Manual “Battery Power”) Once the allow-

DEOHUDQJHUHTXLUHPHQWLVVDWLV¿HGFKDUJ-

ing begins automatically. Note that the

recharging time varies based on the usage

conditions. (Recharging takes longer than

usual when the temperature is 10 °C {50 °F}

or below.)

z If the temperature is low, the operating

time is shortened. Only use the computer

within the allowable temperature range.

z This computer has a high temperature

mode function that prevents the degra-

dation of the battery in high temperature

environments. (ÄReference Manual

“Battery Power”) A level corresponding to

a 100% charge for high temperature mode

is approximately equivalent to an 80%

charge level for normal temperature mode.

z The battery pack is a consumable item.

If the amount of time the computer can

be run by using a particular battery pack

becomes dramatically shorter and re-

peated recharging does not restore its

performance, the battery pack should be

replaced with a new one.

z When transporting a spare battery inside a

package, briefcase, etc., it is recommend-

ed that it be placed in a plastic bag so that

its contacts are protected.

z Always power off the computer when it is

not in use. Leaving the computer on when

the AC adaptor is not connected will ex-

haust the remaining battery capacity.

THIS PRODUCT IS NOT INTENDED FOR

USE AS, OR AS PART OF, NUCLEAR

EQUIPMENT/SYSTEMS, AIR TRAFFIC

CONTROL EQUIPMENT/SYSTEMS, AIR-

CRAFT COCKPIT EQUIPMENT/SYSTEMS*1,

MEDICAL DEVICES OR ACCESSORIES*2,

LIFE SUPPORT SYSTEMS OR OTHER

EQUIPMENTS/DEVICES/SYSTEMS THAT

ARE INVOLVED WITH ENSURING HUMAN

LIFE OR SAFETY. PANASONIC WILL NOT

BE RESPONSIBLE FOR ANY LIABILITY RE-

SULTING FROM THE USE OF THIS PROD-

UCT ARISING OUT OF THE FOREGOING

USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS

include Class2 Electronic Flight Bag (EFB) Sys-

tems and Class1 EFB Systems when used dur-

LQJFULWLFDOSKDVHVRIÀLJKWHJGXULQJWDNHRII

and landing) and/or mounted on to the aircraft.

Class1 EFB Systems and 2 EFB Systems are

GH¿QHGE\)$$$&$GYLVRU\&LUFXODU$

RU-$$-$$7*/7HPSRUDU\*XLGDQFH/HDÀHWV

No.36.

*2$VGH¿QHGE\WKH(XURSHDQ0HGLFDO'HYLFH

Directive (MDD) 93/42/EEC.

3DQDVRQLFFDQQRWJXDUDQWHHDQ\VSHFL¿FD-

tions, technologies, reliability, safety (e.g.

Flammability/Smoke/Toxicity/Radio Fre-

quency Emission, etc) requirements related

to aviation standards that exceed the speci-

¿FDWLRQVRIRXU&276&RPPHUFLDO2II7KH

Shelf) products.

Read Me First

Information to the User / Informations destinées aux utilisateurs

This product and your Health

This product, like other radio devices, emits

radio frequency electromagnetic energy. The

level of energy emitted by this product how-

ever is far much less than the electromagnetic

energy emitted by wireless devices like for

example mobile phones.

Because this product operates within the

guidelines found in radio frequency safety

standards and recommendations, we be-

lieve this product is safe for use by consum-

ers. These standards and recommendations

UHÀHFWWKHFRQVHQVXVRIWKHVFLHQWL¿FFRP-

munity and result from deliberations of panels

and committees of scientists who continually

review and interpret the extensive research

literature.

In some situations or environments, the use

of this product may be restricted by the propri-

etor of the building or responsible represen-

tatives of the organization. These situations

PD\IRUH[DPSOHLQFOXGH

z Using this product on board of airplanes,

z In any other environment where the risk of

interference to other devices or services is

SHUFHLYHGRULGHQWL¿HGDVKDUPIXO

If you are uncertain of the policy that applies

RQWKHXVHRIZLUHOHVVGHYLFHVLQDVSHFL¿FRU-

ganization or environment (e.g. airports), you

are encouraged to ask for authorization to use

this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or tele-

vision interference caused by unauthorized

PRGL¿FDWLRQRIWKLVSURGXFW7KHFRUUHFWLRQ

of interference caused by such unauthorized

PRGL¿FDWLRQZLOOEHWKHUHVSRQVLELOLW\RIWKH

user. We and its authorized resellers or dis-

tributors are not liable for damage or violation

of government regulations that may arise from

failing to comply with these guidelines. 26-M-1

<Uniquement pour les modèles avec réseau

ORFDOVDQV¿OHWRX%OXHWRRWK!

Ce produit et votre santé

Ce produit, comme tout autre appareil radio,

émet de

l’énergie radioélectrique. Toutefois, la quantité

d’énergie émise par ce produit est beaucoup

moins importante que l’énergie radioélec-

WULTXHpPLVHSDUGHVDSSDUHLOVVDQV¿OWHOV

que les téléphones portables. L’utilisation de

ce produit ne comporte aucun risque pour le

consommateur du fait que cet appareil opère

dans les limites des directives concernant

les normes et les recommendations de sécu-

rité sur les fréquences radio. Ces normes et

UHFRPPDQGDWLRQVUHÀqWHQWOHFRQVHQVXVGH

ODFRPPXQDXWpVFLHQWL¿TXHHWUpVXOWHQWGH

délibérations de jurys et comités de scienti-

¿TXHVTXLH[DPLQHQWHWLQWHUSUqWHQWFRQWLQXHO-

lement les nouveautés de la vaste littérature

sur les recherches effectuées. Dans certaines

situations ou environnements, l’utilisation de

ce produit peut être restreinte par le proprié-

taire du bâtiment ou par les représentants

responsables de l’organisation. Ces situations

SHXYHQWrWUHOHVVXLYDQWHVSDUH[HPSOH

z A bord d’un avion, ou

z Dans tout autre environnement où les

risques d’interférence sur d’autres appa-

reils ou services sont perçus ou identi-

¿DEOHVFRPPHGDQJHUHX[

Si vous n’êtes pas sûr de la réglementation

applicable à

O¶XWLOLVDWLRQG¶DSSDUHLOVVDQV¿OGDQVXQHRUJD-

QL]DWLRQRXXQHQYLURQQHPHQWVSpFL¿TXHSDU

exemple dans un aéroport) nous vous invitons

à demander l’autorisation

d’utiliser ce produit avant sa mise en marche.

Informations concernant la réglementation

Nous déclinons toute responsabilité pour

toute interférence radio ou télévision causée

SDUGHVPRGL¿FDWLRQVQRQDXWRULVpHVDSSRU-

tées à ce produit. La correction

G¶LQWHUIpUHQFHVFDXVpHVSDUGHWHOOHVPRGL¿-

cations non autorisées sera la seule respon-

sabilité de son utilisateur. Nousmêmes, les

UHYHQGHXUVRI¿FLHOVHWOHVGLVWULEXWHXUVQH

sommes pas responsable de tout dégât ou de

toute violation des règlements de l’État pou-

vant découler du non-respect de ces direc-

tives. 26-F-1

Regulatory Information

Read Me First

Regulatory Information

Lithium Battery / Pile au lithium

Lithium Battery!

This computer contains a lithium battery to

enable the date, time, and other data to be

stored. The battery should only be exchanged

by authorized service personnel.

Warning!

A risk of explosion from incorrect installation

or misapplication may possibly occur. 15-E-1

Pile au lithium!

Le micro-ordinateur renferme une pile au

lithium qui permet de sauvegarder certaines

données, notamment la date et l’heure. La

pile ne doit être remplacée que par un techni-

FLHQTXDOL¿p

Danger ! Risque d’explosion en cas de non

respect de cette mise en garde! 15-F-1

Information for Users on Collection and Disposal of Old Equip-

ment and used Batteries

These symbols are only valid in the European Union.

If you wish to discard this product, please contact your local authori-

ties or dealer and ask for the correct method of disposal. 53-M-1

Safety Precautions

The following safety precautions must be observed during all phases of the operation, usage, ser-

vice or repair of any Personal Computer or Handheld Computer incorporating wireless WAN mo-

dem. Manufacturers of the cellular terminal are advised to convey the following safety information

to users and operating personnel and to incorporate these guidelines into all manuals supplied

with the product. Failure to comply with these precautions violates safety standards of design,

manufacture and intended use of the product. Panasonic assumes no liability for customer failure

to comply with these precautions.

When in a hospital or other health care facility, observe the restrictions on the use of

mobiles. Switch Personal Computer or Handheld Computer incorporating wireless WAN

modem off, if instructed to do so by the guidelines posted in sensitive areas. Medical

equipment may be sensitive to RF energy.

The operation of cardiac pacemakers, other implanted medical equipment and hearing

aids can be affected by interference from Personal Computer or Handheld Computer

incorporating wireless WAN modem placed close to the device. If in doubt about po-

tential danger, contact the physician or the manufacturer of the device to verify that the

equipment is properly shielded. Pacemaker patients are advised to keep their Personal

Computer or Handheld Computer incorporating wireless WAN modem away from the

pacemaker, while it is on.

Switch off Personal Computer or Handheld Computer incorporating wireless WAN mo-

dem before boarding an aircraft. Make sure it cannot be switched on inadvertently. The

operation of wireless appliances in an aircraft is forbidden to prevent interference with

communications systems. Failure to observe these instructions may lead to the suspen-

sion or denial of cellular services to the offender, legal action, or both.

For details on usage of this unit in aircrafts please consult and follow instruction pro-

vided by the airline.

Read Me First

Do not operate Personal Computer or Handheld Computer incorporating wireless WAN

PRGHPLQWKHSUHVHQFHRIÀDPPDEOHJDVHVRUIXPHV6ZLWFKRIIWKHFHOOXODUWHUPLQDO

when you are near petrol stations, fuel depots, chemical plants or where blasting op-

erations are in progress. Operation of any electrical equipment in potentially explosive

atmospheres can constitute a safety hazard.

Your Personal Computer or Handheld Computer incorporating wireless WAN modem re-

ceives and transmits radio frequency energy while switched on. Remember that interfer-

ence can occur if it is used close to TV sets, radios, computers or inadequately shielded

equipment. Follow any special regulations and always switch off Personal Computer or

Handheld Computer incorporating wireless WAN modem wherever forbidden, or when

you suspect that it may cause interference or danger.

5RDGVDIHW\FRPHV¿UVW'RQRWXVHD3HUVRQDO&RPSXWHURU+DQGKHOG&RPSXWHULQ-

corporating wireless WAN modem while driving a vehicle. Do not place the computer

with wireless WAN modem in an area where it could cause personal injury to the driver

or passengers. It is recommended to stow the unit in the boot or secure stowage area

while driving.

Do not place the computer with wireless WAN modem in an area over an air bag or in

the vicinity where an air bag may deploy.

 $LUEDJVLQÀDWHZLWKJUHDWIRUFHDQGLIWKHFRPSXWHUZLWKZLUHOHVV:$1PRGHPLVSODFHG

in the air bag deployment area may be propelled with great force and cause serious

injury to occupants of the vehicle.

IMPORTANT!

Personal Computer or Handheld Computer incorporating wireless WAN modem operate

using radio signals and cellular networks cannot be guaranteed to connect in all condi-

tions. Therefore, you should never rely solely upon any wireless device for essential

communications, for example emergency calls.

Remember, in order to make or receive calls, Personal Computer or Handheld Comput-

er incorporating wireless WAN modem must be switched on and in a service area with

adequate cellular signal strength.

Some networks do not allow for emergency calls if certain network services or phone

IHDWXUHVDUHLQXVHHJORFNIXQFWLRQV¿[HGGLDOLQJHWF<RXPD\QHHGWRGHDFWLYDWH

those features before you can make an emergency call.

Some networks require that a valid SIM card be properly inserted in Personal Computer

or Handheld Computer incorporating wireless WAN modem.

CAUTION:

Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the

Instructions.

58-E-1

ATTENTION:

Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect.

Mettre au rebut les batteries usagées conformément aux instructions.

58-F-1

Camera Light

CAUTION

- The light from the LED is strong and can injure human eyes. Do not look directly at the LEDs

with naked eyes.

57-E-1

Read Me First

Regulatory Information

Federal Communications Commission

Radio Frequency Interference Statement

1RWH7KLVHTXLSPHQWKDVEHHQWHVWHGDQG

found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful in-

terference in a residential installation. This

equipment generates, uses and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio com-

munications. However, there is no guarantee

that interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or television re-

ception, which can be determined by turning

the equipment off and on, the user is encour-

aged to try to correct the interference by one

RUPRUHRIWKHIROORZLQJPHDVXUHV

z Reorient or relocate the receiving antenna.

z Increase the separation between the

equipment and receiver.

z Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

z Consult the Panasonic Service Center or

an experienced radio/TV technician for

help.

Warning

To assure continued compliance, use only

shielded interface cables when connecting to

a computer or peripheral. Also, any changes

RUPRGL¿FDWLRQVQRWH[SUHVVO\DSSURYHGE\

the party responsible for compliance could

void the user’s authority to operate this equip-

ment.

)&&5)([SRVXUH:DUQLQJ

z This equipment is provided with PC Card

slot that could be used with wireless trans-

PLWWHUVZKLFKZLOOEHVSHFL¿FDOO\UHFRP-

mended when they become available.

Other third-party wireless transmitters

have not been RF exposure evaluated for

use with this computer and may not com-

ply with FCC RF exposure requirements.

<Only for model with wireless LAN/wireless

WAN/Bluetooth>

z This equipment complies with FCC radia-

tion exposure limits set forth for an uncon-

trolled environment.

z This equipment may not be co-located or

operated with any other antenna or trans-

mitter.

z This device meets the government’s re-

quirements for exposure to radio waves.

This device is designed and manufactured

not to exceed the emission limits for expo-

sure to radio frequency (RF) energy set by

the Federal Communications Commission

of the U.S. Government.

z The exposure standard for wireless device

employs a unit of measurement known as

WKH6SHFL¿F$EVRUSWLRQ5DWHRU6$57KH

SAR limit set by the FCC is

1.6 W/kg.

* Tests for SAR are conducted using stan-

dard operating positions accepted by the

FCC with the device transmitting at its

KLJKHVWFHUWL¿HGSRZHUOHYHOLQDOOWHVWHG

frequency bands.

Although the SAR is determined at the

KLJKHVWFHUWL¿HGSRZHUOHYHOWKHDFWXDO

SAR level of the device while operating

can be well below the maximum value.

This is because the device is designed

to operate at multiple power levels so as

to use only the poser required to reach

the network. In general, the closer you

are to a wireless base station antenna,

the lower the power output.

This product is restricted to indoor use due

to its operation in the 5.15 to 5.25 GHz fre-

quency range. FCC requires this product to

be used indoors for the frequency range 5.15

to 5.25 GHz to reduce the potential for harm-

ful interference to co-channel Mobile Satellite

systems. High power radars are allocated

as primary users of the 5.25 to 5.35 GHz

and 5.65 to 5.85 GHz bands. These radar

stations can cause interference with and/or

damage this product. 25-M-W-1

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

WZRFRQGLWLRQV

(1) This device may not cause harmful inter-

ference, and

(2) This device must accept any interference

received, including interference that may

cause undesired operation.

5HVSRQVLEOH3DUW\3DQDVRQLF&RUSRUDWLRQRI

North America

One Panasonic Way

Secaucus, NJ 07094

 7HO1R/$3723

(1-800-527-8675)

6-M-1

For U.S.A.

Two Riverfront Plaza

Newark, NJ 07102

Read Me First

FCC RF Exposure Warning:

z This equipment is provided with external

antenna connector(s) for connection to

optional Car Mounter or Port Replicator

for mobile external mounted antenna(s).

External antenna(s) must be professionally

installed and cannot exceed recommended

maximum antenna gain as described in

individual provided supplement instructions

for wireless transmitters. The Car Mounter

is provided with Radiall/Larsen WLAN whip

antenna, type NMO5E2400BKTNC with

5dBi antenna gain. The maximum allow-

able antenna gain for the external WWAN

base whip antenna for the cellular band

is 4 dBi, PCS band is 3 dBi, LTE Band 4

is 3 dBi, LTE Band 17 is 9 dBi and 10 dBi

for LTE Band 13. Also, user must maintain

minimum 20 cm spacing between external

antenna(s) and all person’s body (excluding

extremities of hands, wrist and feet) during

wireless modes of operation.

32-M-1

86$2QO\'LVSRVDOPD\EHUHJXODWHGLQ\RXU

community due to environmental consider-

ations. For disposal or recycling information,

SOHDVHYLVLW3DQDVRQLFZHEVLWHKWWSZZZ

panasonic.com/environmental or call 1-888-

769-0149 65-M-2

This product contains a CR Coin Cell Lithium

Battery which contains Perchlorate Material -

special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/per-

chlorate/

38-M-1

A lithium ion battery that

is recyclable powers the

product you have pur-

chased.

Please call 1-800-8-BAT-

TERY for information on

how to recycle this bat-

tery.

L’appareil que vous vous

êtes procuré est alimen-

té par une batterie au

lithium-ion.

Pour des renseigne-

ments sur le recyclage

de la batterie, veuillez

composer le

1-800-8-BATTERY.

48-M-1

Read Me First

Regulatory Information

For Canada

Canadian ICES-003

CAN ICES-3(B)/NMB-3(B) 7-M-2

Industry Canada

This product complies with RSS210 Industry

Canada.

Operation is subject to the following two con-

ditions;

(1) this device may not cause interference,

and

(2) this device must accept any interference,

including interference that may cause un-

desired operation of the device.

<Ne s’applique qu’aux modèles avec techno-

ORJLH%OXHWRRWK/$1VDQV¿O!

Industrie Canada

Cet équipement est conforme à la norme

CNR-210

d’Industrie Canada. Son fonctionnement est

VRXPLVDX[GHX[FRQGLWLRQVVXLYDQWHV

(1) ce dispositif ne peut produire de brouillage,

(2) ce dispositif doit accepter le brouillage, y

compris le brouillage pouvant entraîner le

fonctionnement non désiré de l’appareil.

30-Ca-1-1

This product (local network devices) for the

band 5150-5250 MHz is only indoor usage

to reduce potential for harmful interference to

co-channel Mobile Satellite systems.

High power radars are allocated as primary

users (meaning they have priority) of 5250-

5350 MHz and 5650-5850 MHz and these

radars could cause interference and/or dam-

age to LELAN devices.

<Ne s’applique qu’aux modèles avec techno-

ORJLH/$1VDQV¿O!

Cet appareil (pour réseaux locaux radioé-

lectriques) dans les bandes de fréquences

5150-5250 MHz est réservé à une utilization

jO¶LQWpULHXUD¿QGHUpGXLUHOHULVTXHG¶LQWHU-

férence avec les systèmes satellites mobiles

bicanaux.

Les radars forte puissance sont désignés

comme étant les premiers utilisateurs (c’est-à-

dire qu’ils ont la priorité) des bandes de fré-

quences 5250-5350 MHz et 5650-5850 MHz.

Ces stations radars peuvent provoquer des

interférences et/ou des dommages à ce péri-

phérique. 30-Ca-2-1

<Only for model with wireless LAN/wireless

WAN/Bluetooth>

z This computer complies with Industry

Canada radiation exposure limits set forth

for an uncontrolled environment.

z This PC with WLAN and/or Bluetooth

transmitters installed, has been approved

for portable operation and does not require

any minimum spacing be provided be-

tween antennas and all person’s body.

<Ne s’applique qu’aux modèles avec techno-

ORJLH%OXHWRRWK/$1VDQV¿O:$1VDQV¿O!

z Cet équipement est conforme aux limites

d’exposition aux rayonnements d’Industrie

Canada établies pour un environnement

non contrôlé.

z Ce PC avec émetteurs WLAN et/ou Blue-

WRRWKDpWpDSSURXYpjGHV¿QVG¶RSpUDWLRQ

mobile; aucun espace minimum entre les

antennes et le corps de l’utilisateur n’est

requis.

This device has been designed to operate

with the Radiall/Larsen whip antenna, type

NMO5E2400BKTNC WLAN antenna having

a maximum gain of 5dB. A WLAN Antenna

having a higher gain is strictly prohibited per

regulations of Industry Canada. The Required

antenna impedance is 50 ohms.

To reduce potential radio interference to other

users, the antenna type and its gain should

be so chosen that the equivalent isotropically

radiated power (EIRP) is not more than that

required for successful communication.

Cet appareil est conçu pour opérer avec

l’antenne-fouet Radiall/Larsen, type WLAN

NMO5E2400BKTNC, ayant un gain maximum

de 5 dB. Les règlements d’Industrie Canada

interdisent l’utilisation d’une antenne WLAN

dont le gain serait supérieur à cette limite.

L’antenne doit avoir une impédance de 50

ohms.

$¿QGHUpGXLUHOHULVTXHG¶LQWHUIpUHQFHUD-

dioélectrique aux autres utilisateurs des

bandes de fréquences, le type d’antenne et

son gain doivent être tels que la puissance

isotrope rayonnée équivalente (PIRE) n’est

pas plus élevée que le niveau requis pour as-

surer la communication. 25-Ca-1-1

Read Me First

For India

For the purpose of recycling to facilitate effective utilization of resources, please return

this product to a nearby authorized collection center, registered dismantler or recycler,

or Panasonic service center when disposing of this product.

Please see the Panasonic website for further information on collection centers, etc.

KWWSZZZSDQDVRQLFFRLQZSVSRUWDOKRPH 68-M-1

<Only for model with wireless LAN/wireless

WAN/Bluetooth>

* This computer complies with Industry

Canada radiation exposure limits set forth

for an uncontrolled environment.

* This PC with WLAN and/or Bluetooth

transmitters installed, has been approved

for portable operation and does not require

any minimum spacing be provided between

antennas and all person’s body.

<Ne s’applique qu’aux modèles avec tech-

QRORJLH%OXHWRRWK/$1VDQV¿O:$1VDQV¿O!

* Cet équipement est conforme aux limites

d’exposition aux rayonnements d’Industrie

Canada établies pour un environnement non

contrôlé.

* Ce PC avec émetteurs WLAN et/ou

%OXHWRRWKDpWpDSSURXYpjGHV¿QV

d’opération mobile; aucun espace minimum

entre les antennes et le corps de l’utilisateur

n’est requis..

This device has been designed to operate

with the WWAN antenna having a maxi-

mum gain of 4 dBi for Cellular band, 3 dBi

for the PCS band and 5.5 dBi for LTE Band

4. WWAN Antenna having a higher gain is

strictly prohibited per regulations of Industry

Canada. The Required antenna impedance is

50 ohms.

To reduce potential radio interference to other

users, the antenna type and its gain should

be so chosen that the equivalent isotropically

radiated power (EIRP) is not more than that

required for successful communication.

Cet appareil est conçu pour opérer avec une

DQWHQQH::$1UpVHDXpWHQGXVDQV¿OGRQW

OHJDLQPD[LPXPHVW¿[pj>;@SRXUODEDQGH

cellulaire et à 4 dBi pour la bande cellulaire,

3 dBi pour la bande PCS et 5.5 dBi pour la

bande LTE Band 4. Les règlements d’Industrie

Canada interdisent l’utilisation d’une antenne

WWAN dont le gain serait supérieur à cette

limite. L’antenne doit avoir une impédance de

50 ohms.

$¿QGHUpGXLUHOHULVTXHG¶LQWHUIpUHQFHUD-

dioélectrique aux autres utilisateurs des

bandes de fréquences, le type d’antenne et

son gain doivent être tels que la puissance

isotrope rayonnée équivalente (PIRE) n’est

pas plus élevée que le niveau requis pour as-

surer la communication. 32-Ca-1-1

)2586(:,7+02'(/12&)$$&

328587,/,6(5$9(&02'Ê/(&)$$&

20-Ca-1

Bluetooth>

Getting Started

Thank you for purchasing this Panasonic product. For optimum performance and safety, please

read these instructions carefully.

In these instructions, the names are referred as follows.

indicates Windows® 8 Operating System.

indicates Windows® 7 Operating System.

 Terms and illustrations in these instructions

CAUTION  &RQGLWLRQVWKDWPD\UHVXOWLQPLQRURUPRGHUDWHLQMXU\

NOTE  8VHIXODQGKHOSIXOLQIRUPDWLRQ

Enter

 3UHVV>(QWHU@NH\

Alt

Del

 3UHVVDQGKROG>$OW@NH\DQGWKHQSUHVV>'HO@NH\

Î 3DJHLQWKHVH2SHUDWLQJ,QVWUXFWLRQVRULQWKH5HIHUHQFH0DQXDO

 5HIHUHQFHWRWKHRQVFUHHQPDQXDOV

Display “Charm” Flick from right side to inside of the screen.

7RXFK>&KDUP@

 7KLVLOOXVWUDWLRQPHDQVWRWRXFK

(Settings) in the Charm menu.

6WDUW>$OO3URJUDPV@ 7RXFK

6WDUWDQGWKHQWRXFK>$OO3URJUDPV@

z 6RPHLOOXVWUDWLRQVDUHVLPSOL¿HGWRKHOS\RXUXQGHUVWDQGLQJDQGPD\ORRNGLIIHUHQWIURPWKH

actual unit.

z If you do not log on as an administrator, you cannot use some functions or cannot display

some screens.

z Refer for the latest information about optional products to the catalogs, etc.

z In these instructions, the names and terms are referred as follows.

y “Windows® 8 Pro 64-bit” as “Windows” or “Windows 8”

y “Windows® 7 Professional 32-bit Service Pack 1” and “Windows® 7 Professional 64-bit Ser-

vice Pack 1” as “Windows” or “Windows 7”

y DVD MULTI drive as “DVD drive”

6FUHHQPHVVDJHVDUHH[SODLQHGLQ>(QJOLVK8QLWHG6WDWHV@

(Depending on the language preference, some screen messages in these instructions are dif-

IHUHQWIURPWKHDFWXDOVFUHHQPHVVDJHV)RUH[DPSOH>)OLJKWPRGH@PD\EHGLVSOD\HGLQVWHDG

RI>$LUSODQHPRGH@LQVRPHODQJXDJHSUHIHUHQFH

 Disclaimer

&RPSXWHUVSHFL¿FDWLRQVDQGPDQXDOVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH3DQDVRQLF&RUSRUD-

tion assumes no liability for damage incurred directly or indirectly from errors, omissions or dis-

crepancies between the computer and the manuals.

 Trademarks

Microsoft®, Windows®, and the Windows logo are registered trademarks of Microsoft Corporation

of the United States and/or other countries.

Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corpo-

ration.

microSDXC Logo is a trademark of SD-3C, LLC.

Introduction

Getting Started

Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of

Adobe Systems Incorporated in the United States and/or other countries.

Bluetooth® is a registered trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Pana-

sonic Corporation.

+'0,WKH+'0,/RJRDQG+LJK'H¿QLWLRQ0XOWLPHGLD,QWHUIDFHDUHWUDGHPDUNVRUUHJLVWHUHG

trademarks of HDMI Licensing LLC in the United States and other countries.

Names of products, brands, etc., appearing in this manual are trademarks or registered trade-

marks of their respective own companies.

 On-screen Manual

For further information about the computer, you can refer to the on-screen manual.

zReference Manual

The Reference Manual contains the practical information to help you fully enjoy the comput-

er’s performance.

zImportant Tips

The Important Tips will provide you with the battery information so that you can use the battery

pack in the optimum condition to obtain longer operation time.

To access the on-screen manuals, follow the steps below.

2QWKH6WDUWVFUHHQWRXFKWKH>0DQXDO6HOHFWRU@WLOHDQGVHOHFWWKHRQVFUHHQPDQXDO

'RXEOHWRXFK>0DQXDO6HOHFWRU@RQWKHGHVNWRSVFUHHQDQGVHOHFWWKHRQVFUHHQPDQXDO

Getting Started

First-time Operation

5 Setup Windows.

Follow the on-screen instructions.

z The computer restarts several times. Do not touch the screen

or tablet buttons, and wait until the drive indicator

has

turned off.

z After the computer is turned on, the screen remains black or

unchanged for a while, but this is not a malfunction. Wait for

a moment until the Windows setup screen appears.

z Setup of Windows will take approximately 5 min-

utes / 20 minutes.



*RWRWKHQH[WVWHSFRQ¿UPLQJHDFKPHVVDJHRQWKHGLVSOD\

z Follow the steps below.



AWhen “Enable sensors” is displayed, touch>(QDEOHWKLV

VHQVRU@



B:KHQWKH>8VHU$FFRXQW&RQWURO@VFUHHQLVGLVSOD\HG

touch><HV@



C$WWKH>'LVSOD\5RWDWLRQ7RRO@FRQ¿UPDWLRQVFUHHQWouch

><HV@



The computer restarts automatically, and the setting is en-

abled.

z “Join a wireless network” screen may not ap-

pear.

You can set the Wireless Network after the setup of Windows

is complete.

CAUTION

z You can change the user name, password, image and security

setting after setup of Windows.

z Remember your password. If you forget the password, you can-

not use Windows. Creating a password reset disk beforehand is

recommended.

z 'RQRWXVHWKHIROORZLQJZRUGVIRUXVHUQDPH&21351

AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &,

space. In particular, if you create a user name (account name)

that includes the “@” mark, a password will be requested at the

log-on screen, even if no password has been set. If you try to

log on without entering a password, “The user name or pass-

word is incorrect.” may be displayed and you will not be able

to sign in / log on to Windows (Î

page 35).

6 Create the recovery disc.

A recovery disc allows you to install OS and restore its factory

default condition, in case, for example, the recovery partition

RIWKHÀDVKPHPRU\LVGDPDJHG:HUHFRPPHQGFUHDWLQJD

recovery disc before you begin using the computer.

Refer to ÎReference Manual “Recovery Disc Creation Util-

ity” about creating the disc.

Getting Started

Turning On

Press and hold the power switch

(Î page 16) until the power indicator (Î page 16)

lights.

NOTE

z Do not press the power switch repeatedly.

z The computer will forcibly be turned off if you press and hold the power switch for four sec-

onds or longer.

z Once you turn off the computer, wait for ten seconds or more before you turn on the computer

again.

z Do not perform the following operation until the drive indicator

turns off.

y Connecting or disconnecting the AC adaptor

y Pressing the power switch

y Touching the tablet buttons, screen or external mouse/keyboard

Turning Off

A Shut down the computer.

1. Display “Charm” and touch .

2. Touch>3RZHU@>6KXW GRZQ@

Touch

6WDUW>6KXWGRZQ@

NOTE

To turn off the computer, proceed as follows.

A Display “Charm” and touch - >&KDQJH3&VHWWLQJV@>*HQHUDO@

B Touch>5HVWDUWQRZ@XQGHU³$GYDQFHGVWDUWXS´

C Touch>7XUQRII\RXU3&@

Precaution against Starting Up/Shutting Down

z Do not do the following

y Connecting or disconnecting the AC adaptor

y Pressing the power switch

y Touching the screen or external mouse/keyboard

NOTE

z To conserve power, the following power saving methods are set at the time of purchase.

y TKHVFUHHQDXWRPDWLFDOO\WXUQVRIIDIWHU

10 minutes (when AC adaptor is connected) of inactivity

5 minutes (when operating on battery power) of inactivity

y The computer automatically enters sleep*1DIWHU

30 minutes / 20 minutes (when AC adaptor is connected) of inac-

tivity

15 minutes (when operating on battery power) of inactivity

*1 Refer to Reference Manual “Sleep and Hibernation Functions” about resuming from sleep.

Turning On / Turning Off

Useful Information

Operation environment

z 3ODFHWKHFRPSXWHURQDÀDWVWDEOHVXUIDFHQRWVXEMHFWWRVKRFNYLEUDWLRQDQGGDQJHURI

dropping. Do not place the computer upright or turn it over. If the computer is exposed to an

extremely strong impact, it may become damaged.

z Operating environment

 7HPSHUDWXUH2SHUDWLRQ°C to 50 °C {14 °F to 122 °F} (IEC60068-2-1, 2)*1

  6WRUDJH°C to 60 °C {-4 °F to 140 °F}

 +XPLGLW\ 2SHUDWLRQ% to 80% RH (No condensation)

  6WRUDJH% to 90% RH (No condensation)

Even within the above temperature/humidity ranges, operation for a long time in extreme en-

vironments, smoking nearby, or operation in places where oil is used or where there is a lot of

dust will result in the product deterioration and will shorten the product life.

*1 Do not expose the skin to this product when using the product in a hot or cold environment. (Î

page 5)

If the computer is wet in temperatures of 0 °C {32 °F} or below, freeze damage may occur.

Make sure to dry off the computer in such temperatures.

z Do not place the computer in the following areas, otherwise the computer may be damaged.

y Near electronic equipment. Image distortion or noise may occur.

y In extremely high or low temperature.

z As the computer can become hot during operation, keep it away from items that are sensitive

to heat.

Handling cautions

7KLVFRPSXWHULVGHVLJQHGWRPLQLPL]HVKRFNWRSDUWVVXFKDVWKH/&'DQGWKHÀDVKPHPRU\

drive, but no warranty is provided against any trouble caused by shock. Be extremely careful

when handling the computer.

z :KHQFDUU\LQJWKHFRPSXWHU

y Turn off the computer.

y Remove all external devices, cables, Smart Cards and other protruding objects.

y Do not drop or hit the computer against solid objects.

y Do not grip the display part.

z When you board an airplane, take the computer with you and never put it in your checked lug-

gage. When using the computer on airplane, follow the airline’s instructions.

z When carrying a spare battery, put it in a plastic bag to protect its terminals.

z Avoid any harmful substances such as oil from getting into the touch pad. The pointer may not

work correctly.

z Be careful not to get injured by dropping or getting hit when carrying the computer.

z Use only the included digitizer pen to touch the screen. Do not place any object on its surface

and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g.,

nails, pencils and ball point pens).

Do not use the screen when dust or dirt (e.g., oil) is on the screen. Otherwise foreign particles on

the screen/digitizer pen can scratch the screen surface or obstruct the digitizer pen operation.

z Use the digitizer pen only for touching the screen. Using it for any other purpose may damage

the digitizer pen and result in scratches on the screen.

z The digitizer uses electromagnetic induction and may not work properly near strong electrical

¿HOGRUPDJQHWLF¿HOGVXFKDV

y Near AM radio base station or relay station antennas

y1HDU&57GLVSOD\VWKDWJHQHUDWHVWURQJHOHFWURPDJQHWLF¿HOGQRLVH

Move the digitizer away from such locations so it will work properly.

z The pointer cannot follow the digitizer pen movement if you move the digitizer pen too quickly.

Handling and Maintenance

Useful Information

Handling and Maintenance

 When the battery indicator does not light on

The battery indicator may not light on even if the AC adaptor and the battery pack are correctly

connected to the computer, due to the following reasons.

z The AC adaptor’s protection function may be working. In this case, pull out the AC cord and

wait for more than 1 minute before reconnecting the AC cord.

 When using peripheral devices

Follow these instructions and the Reference Manual to avoid any damage to the devices. Care-

fully read the instruction manuals of the peripheral devices.

z 8VHWKHSHULSKHUDOGHYLFHVFRQIRUPLQJWRWKHFRPSXWHU¶VVSHFL¿FDWLRQV

z Connect to the connectors in the correct direction.

z If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of

pins, etc.

z If screws are included, fasten them securely.

z Remove the cables when you carry the computer. Do not pull the cables forcibly.

Preventing your computer from unauthorized use via wireless LAN/Bluetooth/Wireless

WAN

Before using wireless LAN/Bluetooth/Wireless WAN, make the appropriate security settings

such as data encryption.

 Battery Recalibration

z The battery recalibration may take a long time due to the large battery capacity. This is not a

malfunction.

<When performing “Battery Recalibration” after shutting down Windows>

y)XOOFKDUJH$SSUR[LPDWHO\KRXUV

&RPSOHWHGLVFKDUJH$SSUR[LPDWHO\KRXUV



When performing “Battery Recalibration” without shutting down Windows, it may take more time to

charge / discharge.

 Sensors

This computer is equipped with four sensors (acceleration sensor, gyro sensor, magnetic sensor,

ambient light sensor), and you can use these sensors with any software that is compatible.

As the accuracy of each sensor output is dependent on the operating environment and other con-

ditions, the results should only be used as a reference.

The acceleration sensor, gyro sensor, and magnetic sensor are located at the bottom left of the

LCD. The detection results of each sensor may vary depending on how you are holding the com-

puter, the application software you are using, and other factors.

zAutomatic brightness adjustment

The computer is equipped with an automatic brightness adjustment function that adjusts the

GLVSOD\VFUHHQEDVHGRQWKHDPELHQWOLJKWVHQVRU<RXFDQFRQ¿JXUHWKHDXWRPDWLFDGMXVWPHQW

function as follows.

ADisplay “Charm” and touch >&KDQJH3&6HWWLQJV@>*HQHUDO@>6FUHHQ@>$GMXVWP\

VFUHHQEULJKWQHVVDXWRPDWLFDOO\@

A Touch

6WDUW>&RQWURO3DQHO@>+DUGZDUHDQG6RXQG@>3RZHU2SWLRQ@

B 7RXFK>&KDQJHSODQVHWWLQJV@IRUWKHSRZHUSODQFXUUHQWO\XVHG

Useful Information

C 7RXFK>&KDQJHDGYDQFHGSRZHUVHWWLQJV@DQGGRXEOHWRXFK>'LVSOD\@

D 'RXEOHWRXFK>(QDEOHDGDSWLYHEULJKWQHVV@PDNHQHFHVVDU\VHWWLQJVDQGWRXFK>2.@

Set each item to ON, and the brightness of the screen display will adjust automatically.

The ambient light sensor is located at the top of LCD.

The ambient light cannot be detected properly if this area is obstructed or dirty.

zMagnetic sensor

The magnetic sensor on the computer operates by detecting geomagnetism. Therefore, the

magnetic sensor may not function properly and it readings may be inaccurate, especially in

the following environments.

y Inside or near steel structures such as buildings or bridges

y Inside or near automobiles, or near train power lines

y Near metallic furniture or appliances

y When the AC adaptor or other peripheral devices are brought closer to the computer

y1HDUPDJQHWVVSHDNHUVRURWKHUREMHFWVZLWKVWURQJPDJQHWLF¿HOGV

The magnetic directions indicated by the magnetic sensor may not be accurate immediately

DIWHUSXUFKDVHRULQHQYLURQPHQWVZLWKSRRUPDJQHWLF¿HOGV

In such cases, turn on the computer and move it as follows.

A Hold the computer so that its screen side is facing upward and level.

B While keeping the computer level, rotate it 90 degrees or more clockwise.

C Return the computer to position A, and rotate it 90 degrees or more counterclockwise.

D Return the computer to position A.

ETilt the computer 90 degrees or more to the left so that the left side of the computer tilts

down.

FReturn the computer to position A, and tilt it 90 degrees or more to the right so that the

right side of the computer tilts down.

CAUTION

 Ɣ+ROGWKHFRPSXWHU¿UPO\ZKHQPRYLQJLW6WURQJVKRFNVIURPGURSSLQJWKHFRPSXWHUPD\

result in damage.

Useful Information

Handling and Maintenance

Maintenance

If drops of water or other stains get on the surface of the LCD panel, wipe them off immediately.

Failure to do so may result in staining.

To clean the LCD panel

Use the soft cloth included with the computer. (For further information, refer to “Suggestions

About Cleaning the LCD Surface” ÎReference Manual “Screen Input Operation”.)

To clean areas other than the LCD panel

Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted

detergent and wring it thoroughly.

CAUTION

z Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface caus-

ing discoloration, etc. Do not use commercially-available household cleaners and cosmetics,

as they may contain components harmful to the surface.

z Do not apply water or detergent directly to the computer, since liquid may enter inside of the

computer and cause malfunction or damage.

To clean inside of the dust cover

Approximately once a month, clean up inside of the dust cover by the following procedure.

A Turn off the computer and remove the AC adaptor.

B Remove the battery pack.

C Remove the screw (A) and dust cover as illustrated below.

㪘

D Clean up inside of the dust cover.

E Set the dust cover, screw and battery pack.

Useful Information

Installing software will return the computer to the default condition. When you install the soft-

ZDUHWKHÀDVKPHPRU\GDWDZLOOEHHUDVHG

Back up important data to other media or an external hard disk before installation.

CAUTION

z'RQRWGHOHWHWKH5HFRYHU\3DUWLWLRQRQWKHÀDVKPHPRU\7KHGLVNVSDFHLQWKHSDUWLWLRQLV

not available to store data.

To check the Recovery Partition, perform the following methods.

A

 Open “Computer”. Long touch>&RPSXWHU@WKHQWouch>0DQDJH@

 To open “Computer”, proceed as follows on the Start screen.

1. On the Start screen,ÀLFNIURPULJKWVLGHWRLQVLGHRIWKHVFUHHQ.

2. Touch>$OODSSV@RQWKHWRROEDU

3. Touch>&RPSXWHU@XQGHU³:LQGRZV6\VWHP´



Touch

(Start) and long touch>&RPSXWHU@WKHQWouch>0DQDJH@

 z A standard user needs to enter an administrator password.

B7RXFK>'LVN0DQDJHPHQW@

 Flash memory Recovery

You can reinstall the OS that was pre-installed at the time of purchase (Windows 8 or Windows 7).

Preparation

z Connect the external keyboard.

z Remove all peripherals.

z Connect the AC adaptor and do not remove it until installation is complete.

1 Perform “Remove everything and reinstall Windows”.

A Display “Charm” and touch

>&KDQJH3&VHWWLQJV@>*HQHUDO@

B7RXFK>*HW6WDUWHG@XQGHU³5HPRYHHYHU\WKLQJDQGUHLQVWDOO:LQGRZV´

Installation starts according to the instructions on the screen. (It will take approximately

20 minutes.)

z Do not interrupt installation, for example by turning off the computer or performing other

operation.

Otherwise installation may become unavailable as Windows may not start up or the

data may be corrupted.

2 When termination screen is displayed, touch [OK] to turn off the com-

puter.

3 Turn on the computer.

z If the password is requested, enter the Supervisor Password.

4 Perform the “First-time Operation” (Î page 20).

5 Start the Setup Utility and change the settings as necessary.

6 Perform Windows Update.

7 <Only for model with TPM> Clear TPM.

A2QWKH6WDUWVFUHHQÀLFNIURPERWWRPVLGHWRLQVLGHRIWKHVFUHHQDQGWRXFK>$OODSSV@

on the toolbar.

B7RXFK>5XQ@XQGHU³:LQGRZV6\VWHP´LQSXW>WSPPVF@DQGWRXFK>2.@

C7RXFK>&OHDU730@XQGHU³$FWLRQV´RQWKHULJKWRIWKH³7300DQDJHURQ/RFDO&RP-

puter” screen.

Installing Software

Useful Information

Installing Software

D7RXFK>5HVWDUW@RIWKH³0DQDJHWKH730VHFXULW\KDUGZDUH´VFUHHQ

The computer will restart.

E:KHQ³730FRQ¿JXUDWLRQFKDQJHZDVUHTXHVWHGWR´LVGLVSOD\HGSUHVV

F12

Windows will start.

F:KHQ³730LVUHDG\´DSSHDUVWRXFK>&ORVH@

1 Turn on the computer, and press

Del

while [Panasonic] boot

screen is displayed.

The Setup Utility starts up.

z ,IWKH>3DQDVRQLF@ERRWVFUHHQLVQRWGLVSOD\HGWXUQRQWKHFRPSXWHUZKLOHKROGLQJGRZQ

Del

z If the password is requested, enter the Supervisor Password.

2 Write down all of the contents of the Setup Utility and press

$WWKHFRQ¿UPDWLRQPHVVDJHVHOHFW><HV@DQGSUHVV

Enter

3 Press

F10

$WWKHFRQ¿UPDWLRQPHVVDJHVHOHFW><HV@DQGSUHVV

Enter

Computer will restart.

4 Press

Del

while [Panasonic] boot screen is displayed.

The Setup Utility starts up.

z If the password is requested, enter the Supervisor Password.

Select the [Exit] menu, then select [Recovery Partition] and press

Enter

6 Touch [Reinstall Windows] and touch [Next].

The License Agreement screen appears.

7 Touch [YES].

The License Agreement screen appears.

8 Touch [Yes, I agree to the provisions above and wish to continue!] and

touch [Next].

9 Select the setting and touch [Next].

z >5HLQVWDOO:LQGRZVWRWKHZKROH+DUG'LVNWRIDFWRU\GHIDXOW@

Select this option when you want to install Windows to the factory default. After instal-

lation, you can create a new partition. For how to create a new partition, refer to “To

change the partition structure” (Î page 21).

z >5HLQVWDOOWRWKH6\VWHPDQG26SDUWLWLRQV@*1

6HOHFWWKLVRSWLRQZKHQWKHÀDVKPHPRU\KDVDOUHDG\EHHQGLYLGHGLQWRVHYHUDOSDUWL-

tions. For how to create a new partition, refer to “To change the partition structure” (Î

page 21

You can keep the partition structure.

*1 This does not appear if Windows cannot be installed to the recovery partition and the area us-

able by Windows.

 $WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><(6@

11 Select OS (32bit or 64bit) and touch [OK].

 $WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><(6@

Installation starts according to the instructions on the screen. (It will take approximately 20

minutes.)

z Do not interrupt installation, for example by turning off the computer or pressing

Ctrl

Alt

Del

Useful Information

Otherwise installation may become unavailable as Windows may not start up or the

data may be corrupted.

13 When Ending process screen is displayed, touch [OK] to turn off the

computer.

14 Turn on the computer.

z If the password is requested, enter the Supervisor Password.

15 Perform the “First-time Operation” (Î page 20).

16 Start the Setup Utility and change the settings as necessary.

17 Perform Windows Update.

 Using Recovery Disc

Use the Recovery Disc in the following conditions.

y You have forgotten the administrator password.

y ,QVWDOODWLRQLVQRWFRPSOHWH7KHUHFRYHU\SDUWLWLRQLQWKHÀDVKPHPRU\PD\EHEURNHQ

y <Only for Windows 7 downgrade model>

To change OS from Windows 7 to Windows 8, or vice versa.

NOTE

z To change OS from 32 bit to 64 bit, or vice versa, install OS using the recovery

SDUWLWLRQLQWKHÀDVKPHPRU\

Preparation

z 3UHSDUHWKHIROORZLQJLWHPV

• Recovery Disc (ÎReference Manual “Recovery Disc Creation Utility”)

• USB DVD drive (optional) (refer to recent catalogs and other sources for information

about the products available)

z Remove all peripherals (except for the USB DVD drive).

z Connect the AC adaptor and do not remove it until installation is complete.

NOTE

z You can use the following buttons instead of the keyboard.

)NH\'HIDXOWVHWWLQJ

ĻNH\

ĹNH\

(QWHUNH\

7DENH\

1 Connect the DVD drive to the USB port.

2 Start the Setup Utility.

A Display “Charm” and touch

>&KDQJH3&VHWWLQJV@>*HQHUDO@

B7RXFK>5HVWDUWQRZ@XQGHU³$GYDQFHGVWDUWXS´

C7RXFK>7URXEOHVKRRW@>$GYDQFHGRSWLRQV@>8(),)LUPZDUH6HWWLQJV@>5HVWDUW@

7XUQRQWKHFRPSXWHUDQGWRXFKWRSOHIWRIWKHVFUHHQZKLOH>3DQDVRQLF@ERRWVFUHHQLV

displayed.

z ,IWKH>3DQDVRQLF@ERRWVFUHHQLVQRWGLVSOD\HGWXUQRQWKHFRPSXWHUZKLOHWRXFKLQJWRS

left of the screen.

Useful Information

Installing Software

z If the password is requested, enter the Supervisor Password.

3 Write down all of the contents of the Setup Utility and touch [Exit] and

double-touch [Load Default Values].

$WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><HV@

4 Check the [UEFI Boot] setting of the Setup Utility.

>8(),%RRW@VKRXOGEHVHWWRDVIROORZV

:KHQWKHUHFRYHU\GLVFIRU:LQGRZVLVXVHG>(QDEOHG@

:KHQWKHUHFRYHU\GLVFIRU:LQGRZVLVXVHG>'LVDEOHG@

5 Set the Recovery Disc into the DVD drive.

6 Touch [Exit] and double-touch [Save Values and Reboot].

$WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><HV@

Computer will restart.

7 Touch top left of the screen while [Panasonic] boot screen is dis-

played.

The Setup Utility starts up.

z If the password is requested, enter the Supervisor Password.

8 Touch [Exit], then double-touch your DVD drive in [Boot Override].

9 Double-touch [Yes].

The computer will restart.

10 Touch [Reinstall Windows] and touch [Next].

11 $WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><(6@

12 At the License Agreement screen, Touch [Yes, I agree to the provi-

sions above and wish to continue!] and touch [Next].

13 When the recovery disc for Windows 8 is used, touch [Next].

When the recovery disc for Windows 7 is used, select the setting and

touch [Next].

z>5HLQVWDOO:LQGRZVWRWKHZKROH+DUG'LVNWRIDFWRU\GHIDXOW@

Select this option when you want to install Windows to the factory default. After instal-

lation, you can create a new partition. For how to create a new partition, refer to “To

change the partition structure” (Îpage 21).

z >5HLQVWDOOWRWKH6\VWHPDQG26SDUWLWLRQV@*2

Select this option when the Àash memory has already been divided into several parti-

tions. For how to create a new partition, refer to “To change the partition structure” (Î

page 21).

You can keep the partition structure.

*2 This does not appear if Windows cannot be installed to the recovery partition and the area us-

able by Windows.

 $WWKHFRQ¿UPDWLRQPHVVDJHWRXFK><(6@

Installation starts according to the instructions on the screen. (It will take approximately 30

- 45 minutes.)

z Do not interrupt installation, for example by turning off the computer.

Otherwise installation may become unavailable as Windows may not start up or the

data may be corrupted.

15 When Ending process screen is displayed, remove the Recovery Disc

and DVD Drive.

Useful Information

16 Touch [OK].

The computer will restart.

Touch [OK] to turn off the computer.

17 Turn on the computer.

z If the password is requested, enter the Supervisor Password.

18 Perform the “First-time Operation” (Î page 20).

19 Start the Setup Utility and change the settings as necessary.

20 Perform Windows Update.

21 <Only for model with TPM> Clear TPM (Î page 27).

Panasonic System Communications

Company of North America

Two Riverfront Plaza,

Newark NJ 07102

Panasonic Australia Pty. Limited

ACN 001 592 187 ABN 83 001 592 187

1 Innovation Road, Macquarie Park NSW 2113

:HE6LWHKWWSSDQDVRQLFQHW

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga,

Ontario L4W 2T3

Printed in Taiwan

TA0113-2053

DFQW5716XAT

Two Riverfront Plaza

Newark, NJ 07102

@@0813-0

DFQW5829ZA

Panasonic of North America 9TGWL14A Wireless Network Adapter User Manual 2

Panasonic Corporation of North America Wireless Network Adapter 2

Contents

User Manual2

User Manual 2

Navigation menu

Namespaces

Views

Navigation