Panasonic of North America 9TGWL16A Wireless Network Adapter User Manual WL16A

Panasonic Corporation of North America Wireless Network Adapter WL16A

User Manual_WL16A

Download: Panasonic of North America 9TGWL16A Wireless Network Adapter User Manual  WL16A
Mirror Download [FCC.gov]Panasonic of North America 9TGWL16A Wireless Network Adapter User Manual  WL16A
Document ID3385757
Application IDtnOjl9UnO03e1mwDpLSq9A==
Document DescriptionUser Manual_WL16A
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize3.68kB (46016 bits)
Date Submitted2017-05-10 00:00:00
Date Available2017-06-24 00:00:00
Creation Date2016-12-09 11:16:15
Producing SoftwareAcrobat Distiller 10.1.2 (Windows)
Document Lastmod2016-12-09 11:16:15
Document TitleUser Manual_WL16A
Document CreatorPScript5.dll Version 5.2.2

IC: 216H-CFWL16A
WLAN+BT module adapter
Model number: WL16A
User Manual
GENERAL
This device is the WLAN+BT module adapter IEEE802.11a/b/g/n/ac, dual band 2x2 Wi-Fi
+Bluetooth® adapter.
Integration to the end product
1. Insert WL16A module into PCIe M.2 card connector.
2. Secure the end of product using the screw.
3. Insert Antenna unit into Antenna connectors of WL16A module.
Technical Specification
a)
b)
c)
d)
e)
f)
g)
h)
i)
Dimensions (H x W x D):
Weight:
IEEE WLAN Standard:
Bluetooth:
Antenna Diversity:
Operating Temperature:
Humidity:
Connector interface:
Host interface:
22mm x 30mm x 2.39mm
2.57g
IEEE802.11a/b/g/n/ac
BDR, EDR, Low energy
Supported
-10 to 50 degree Celsius
30 to 80 %RH
PCIe M.2
USB2.0 and PCIe v2.1 Gen1
IC: 216H-CFWL16A
Regulatory Information
Canada-Industry Canada (IC)
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
This device (local network devices) for the band 5150-5250 MHz is only indoor usage to
reduce potential for harmful interference to co-channel Mobile Satellite systems. High
power radars are allocated as primary users (meaning they have priority) of 5250-5350
MHz and 5650-5850 MHz and these radars could cause interference and/or damage to
LELAN devices.
Cet appareil (pour réseaux locaux radioélectriques) dans les bandes de fréquences
5150-5250 MHz est réervéàune utilisation àl’intéieur afin de réuire le risque d’interféence
avec les systèmes satellites mobiles bicanaux. Les radars forte puissance sont désignés
comme étant les premiers utilisateurs (c’st-à-dire qu’ls ont la priorité) des bandes de
fréquences 5250-5350 MHz et 5650-5850 MHz. Ces stations radars peuvent provoquer
des interférences et/ou des dommages à ce périphérique.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotopically radiated power (EIRP) is not more than that
required for successful communication.
IC: 216H-CFWL16A
Caution: Exposure to Radio Frequency Radiation.
To comply with IC RF exposure compliance requirements, a separation distance of at least
8mm must be maintained between the antenna of this device and all persons. This device
must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour
un environnement non contrôlé et respecte les règles d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en
gardant une distance de 8 mm ou plus entre le radiateur et le corps humain.
Instructions to OEM Integrators
A User manual provided to the end user must indicate the operating requirements and
conditions that must be observed to ensure compliance with the above-mentioned IC RF
Exposure guideline.
If this module is intended for use in a portable device, integrators are responsible for
separate evaluation and/or approval to satisfy IC RF Exposure requirements.
If other radio devices are to be integrated with this module, an additional evaluation and IC
submission may be required. Integrators are responsible for such additional evaluation and
IC submission.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2016:12:09 11:16:15+09:00
Modify Date                     : 2016:12:09 11:16:15+09:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 10.1.2 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:9c228355-8a97-4828-9d1b-4352d3dd084a
Instance ID                     : uuid:a87610e1-ed1b-4720-a7ee-0b68fb5a3b54
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ACJ9TGWL16A

Navigation menu