Panasonic of North America 9TGWW16B Radio Module User Manual CF 20mk2 Readme DHQX1427ZA J1 OI M indb
Panasonic Corporation of North America Radio Module CF 20mk2 Readme DHQX1427ZA J1 OI M indb
User Manual_20171112_v1 - Host User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3642909 |
| Application ID | 4tBQJzwhhlbQrjekDjr2QA== |
| Document Description | User Manual_20171112_v1 - Host User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 162.17kB (2027133 bits) |
| Date Submitted | 2017-11-17 00:00:00 |
| Date Available | 2018-05-20 00:00:00 |
| Creation Date | 2017-09-22 09:22:55 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2017-10-05 10:49:30 |
| Document Title | CF-20mk2_Readme(DHQX1427ZA_J1)_OI_M.indb |
| Document Creator | Adobe InDesign CS6 (Windows) |
OPERATING INSTRUCTIONS Read Me First Personal Computer series Read Me First Safety Precautions.......................................... 2 Regulatory Information.................................... 7 Getting Started First-time Operation...................................... 15 Detaching the tablet from the keyboard base..... 20 Attaching the tablet to the keyboard base..... 22 n Terms and illustrations in these instructions In these instructions, the names and terms are referred as follows. CAUTION : Conditions that may result in minor or moderate injury. NOTE : Useful and helpful information. “Windows 10 Pro 64-bit” as “Windows” or “Windows 10” This manual explains operation procedures using the touchpad or mouse as typical examples. In addition, you can touch the display screen to operate the computer. When using the touch operation, please replace the terms as described below, and read the instructions. Operation terms to be replaced: - Click → Touch è: (Settings): Click (Start) and then click (Settings). Page in these Operating Instructions. Reference to the on-screen manuals. Please read these instructions carefully before using this product, and save this manual for future use. The above illustration is that is attached the keyboard base. Read Me First CF-20 Getting Started Contents Model No. Safety Precautions To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. Read Me First DANGER Denotes a potential hazard that will result in serious injury or death. WARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes a hazard that could result in minor injury. NOTICE Denotes a hazard that could result in property damage. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to a specific operating procedure that must not be performed. This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safety. DANGER Precautions on the Battery Pack Electrolyte leakage, generation of heat, ignition or rupture of the Battery Pack may result. Do Not Throw the Battery Pack into a Fire or Expose It to Excessive Heat Do Not Deform, Disassemble, or Modify the Battery Pack Do Not Short the Positive (+) and Negative (-) Contacts ÖÖDo not place the battery pack together with articles such as necklaces or hairpins when carrying or storing. Do Not Apply Shocks to the Product by Dropping It, Applying Strong Pressure to It, etc. ÖÖIf this product is subjected to a strong impact, damaged or deformed, stop using it immediately. Do Not Charge the Battery Using Methods Other Than Those Specified Do Not Use the Battery Pack with Any Other Product • The battery pack is rechargeable and was intended for the specified product. Do Not Use This Product with a Battery Pack Other Than the One Specified ÖÖUse only the specified battery pack with your product. Do not use battery pack if wet Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example) When the Battery Pack Has Deteriorated or If Abnormal Swelling Occur, Replace It with New One ÖÖ Do not continue to use a damaged battery pack. Precautions on the Built-in Bridge Battery (for disposal)When disposing the battery, generation of heat, ignition or rupture of the Built-in Bridge Battery may result. (è OPERATING INSTRUCTIONS - Basic Guide) Handling This Computer Do Not Disassemble the Computer Except When Disposing Handling the Built-in Bridge Battery Do Not Short the Positive (+) and Negative (-) Contacts Do Not Throw the Battery into a Fire or Expose It to Excessive Heat Do Not Apply Shocks to the Built-in Bridge Battery by Dropping It, Applying Strong Pressure to It, etc. Do Not Charge Do Not Use Do Not Deform, Disassemble, or Modify the Built-in Bridge Battery Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example) WARNING Generation of heat, ignition or rupture of the Built-in Bridge Battery may result. Avoid Extreme Heat (Near the Fire, In Direct Sunlight, for Example) When the Built-in Bridge Battery Has Deteriorated or If Abnormal Swelling Occur, Contact Your Technical Support Office to Replace the Battery Fire or electric shock may result. Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. ÖÖDo not continue to use a damaged AC cord, AC plug and AC adaptor. • Contact your technical support office for repair. Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet ÖÖ Connecting to a DC/AC converter (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/charger to an AC outlet specifically approved for such use. Do Not Pull or Insert the AC Plug If Your Hands Are Wet Do Not Disassemble This Product Do Not Touch This Product In a Thunderstorm If Connected with the AC Cable or Any Other Cables Do Not Place Containers of Liquid or Metal Objects on Top of This Product Read Me First DANGER ÖÖIf foreign matter has found its way inside, immediately turn the power off and unplug the AC plug (and remove the battery pack). Then contact your technical support office. Do Not Throw This Product Into a Fire or Expose It to Excessive Heat Do Not Insert Sharp Objects Into This Product, Disassemble, or Modify It Do Not Apply Shocks to the Product by Dropping It, Applying Strong Pressure to It, etc. Do Not Charge the Battery Using Methods Other Than Those Specified Safety Precautions WARNING Read Me First If a Malfunction or Trouble Occurs, Immediately Stop Use If the Following Malfunction Occurs, Immediately Unplug the AC Plug and the Battery Pack • This product is damaged • Foreign object inside this product • Smoke emitted • Unusual smell emitted • Unusually hot ÖÖAfter the above procedure, contact your technical support office for repair. Clean Dust and Other Debris of the AC Plug Regularly • If dust or other debris accumulates on the plug, humidity, etc. may cause a defect in the insulation. Insert the AC Plug Completely ÖÖDo not use a damaged plug or loose AC outlet. Close the Connector Cover Tightly When Using This Product Where Is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc. ÖÖIf foreign matter has found its way inside, immediately turn the power off and unplug the AC cord, and then remove the battery pack. Then contact your technical support office. Burns or low-temperature burns may result. Do Not Use This Product in Close Contact With Your Body For a Long Period of Time ÖÖDo not use this product with its heat-emitting parts in close contact with your body for a long period of time. • Low-temperature burns may result. Do Not Touch The Surface of The AC Adaptor Continuously While Using/Charging • Burns may result. Do Not Place the Product in a Bag or Case While It is Turned On • Doing so may cause the product to overheat and result in burns. Detrimental health effects on your body may result. Do Not Turn the Volume Up Too Loud When Using Headphones • Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing. CAUTION Fire or electric shock may result. Do Not Move This Product While the AC Plug Is Connected ÖÖIf the AC cord is damaged, unplug the AC plug immediately. Do Not Connect a Telephone Line, or a Network Cable Other Than the One Specified, Into the LAN Port ÖÖDo not connect to a network such as the ones listed below. • Networks other than 1000BASE-T, 100BASE-TX or 10BASE-T • Phone lines (IP phone (Internet Protocol Telephone), Telephone lines, internal phone lines (onpremise switches), digital public phones, etc.) Do Not Subject the AC Adaptor To Any Strong Impact ÖÖDo not continue to use the AC adaptor after a strong impact such as being dropped. ÖÖContact your technical support office for repair. Do Not Leave This Product in High Temperature Environment for a Long Period of Time • Leaving this product where it will be exposed to extremely high temperatures such as near fire or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. Hold the Plug When Unplugging the AC Plug Use Only the Specified AC Adaptor With This Product ÖÖDo not use an AC adaptor other than the one supplied (supplied with the unit or one sold separately as an accessory). This product may fall over or drop, resulting in an injury. Do Not Place This Product on Unstable Surfaces Avoid Stacking When Carrying the Computer, Attach the Main Unit To the Keyboard Base Tightly Until Red Signs Under the Detach Lock And Release Lever Are Concealed. Detrimental health effects on your body may result. Take a Break Of 10-15 Minutes Every Hour • Using this product for long periods of time may have detrimental health effects on the eyes or hands. Burns, low-temperature burns, or frostbite may result. Do Not Expose the Skin To This Product When Using the Product In A Hot Or Cold Environment NOTICE l Do not place the computer near a television or radio receiver. l Keep the computer away from magnets. Data stored on the flash memory may be lost. l This computer is not intended for the display of images for use in medical diagnosis. l This computer is not intended for a use with connection of medical equipment for the purpose of medical diagnosis. l Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product. l Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged. l Do not expose the battery pack to water, or allow it to become wet. l If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place. l This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% of capacity. l The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically. l Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible. Read Me First Fire or electric shock may result. ÖÖWhen it is necessary to expose the skin to this product such as to scan a fingerprint, perform the operation in the shortest time possible. Read Me First Safety Precautions NOTE l The battery pack may become warm during recharging or normal use. This is completely normal. l Recharging will not commence if internal temperature of the battery pack is outside of the allowable temperature range (0 °C to 50 °C {32 °F to 122 °F}). (è OPERATING INSTRUCTIONS - Reference Manual “Basic Operation” “Battery Power”) Once the allowable range requirement is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 °C {50 °F} or below.) l If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range. l This computer has a high temperature mode function that prevents the degradation of the battery in high temperature environments. (è OPERATING INSTRUCTIONS - Reference Manual “Basic Operation” “Battery Power”) A level corresponding to a 100% charge for high temperature mode is approximately equivalent to an 80% charge level for normal temperature mode. l The battery pack is a consumable item. If the amount of time the computer can be run by using a particular battery pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one. l When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected. l Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity. l To minimize deterioration of the built-in bridge battery, connect the computer to the AC adaptor and recharge it for approximately 2 hours about once every year. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/ SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1, MEDICAL DEVICES OR ACCESSORIES*2, LIFE SUPPORT SYSTEMS OR OTHER EQUIPMENTS/DEVICES/SYSTEMS THAT ARE INVOLVED WITH ENSURING HUMAN LIFE OR SAFETY. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES. *1 *2 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36. As defined by the European Medical Device Directive (MDD) 93/42/EEC. Panasonic cannot guarantee any specifications, technologies, reliability, safety (e.g. Flammability/ Smoke/Toxicity/Radio Frequency Emission, etc.) requirements related to aviation standards that exceed the specifications of our COTS (Commercial-Off-The-Shelf) products. This computer is not intended for use in medical equipment including life-support systems, air traffic control systems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. As with any portable computer device precautions should be taken to avoid any damage. The following usage and handling procedures are recommended. Before putting the computer away, be sure to wipe off any moisture. Regulatory Information This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: l Using this product on board of airplanes, or l In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. Read Me First Information to the User / Informations destinées aux utilisateurs 26-M-1 Ce produit et votre santé Ce produit, comme tout autre appareil radio, émet de l’énergie radioélectrique. Toutefois, la quantité d’énergie émise par ce produit est beaucoup moins importante que l’énergie radioélectrique émise par des appareils sans fil tels que les téléphones portables. L’utilisation de ce produit ne comporte aucun risque pour le consommateur du fait que cet appareil opère dans les limites des directives concernant les normes et les recommandations de sécurité sur les fréquences radio. Ces normes et recommandations reflètent le consensus de la communauté scientifique et résultent de délibérations de jurys et comités de scientifiques qui examinent et interprètent continuellement les nouveautés de la vaste littérature sur les recherches effectuées. Dans certaines situations ou environnements, l’utilisation de ce produit peut être restreinte par le propriétaire du bâtiment ou par les représentants responsables de l’organisation. Ces situations peuvent être les suivantes par exemple : l A bord d’un avion, ou l Dans tout autre environnement où les risques d’interférence sur d’autres appareils ou services sont perçus ou identifiables comme dangereux. Si vous n’êtes pas sûr de la réglementation applicable à l’utilisation d’appareils sans fil dans une organisation ou un environnement spécifique, (par exemple dans un aéroport) nous vous invitons àdemander l’autorisation d’utiliser ce produit avant sa mise en marche. Informations concernant la réglementation Nous déclinons toute responsabilité pour toute interférence radio ou télévision causée par des modifications non autorisées apportées à ce produit. La correction d’interférences causées par de telles modifications non autorisées sera la seule responsabilité de son utilisateur. Nousmêmes, les revendeurs officiels et les distributeurs ne sommes pas responsable de tout dégât ou de toute violation des règlements de l’État pouvant découler du non-respect de ces directives. Camera Light / Lumière de la caméra 26-F-1 CAUTION - The light from the LED is strong and can injure human eyes. Do not look directly at the LEDs with naked eyes. ATTENTION - La lumière de la diode LED est forte et peut blesser l’oeil humain. Ne regardez pas directement les LED avec les yeux non protégés. 57-E-1 57-F-1 Regulatory Information Lithium Battery / Pile au lithium Lithium Battery! This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning! A risk of explosion from incorrect installation or misapplication may possibly occur. Pile au lithium! Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines données, notamment la date et l’heure. La pile ne doit être remplacée que par un technicien qualifié. Danger ! Risque d’explosion en cas de non respect de cette mise en garde! 15-F-1 15-E-1 Read Me First Laser Devices This equipment is using lasers that comply with US21CFR1040.10, 1040.11, EN 60825-1:1994+A2:2001+A1:2002 and IEC60825-1:1993+A1:1997+A2:2001 regulations. The laser is a “Class 2” laser which is indicated on the label for this product.” Class 2 laser readers use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. Caution-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. n Labeling/Marking Location of aperture Beam Divergence - Vertical angle: 30 degree - Horizontal angle: 36 degree 13-E-1 Battery Pack / Batterie CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions. ATTENTION: Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect. Mettre au rebut les batteries usagées conformément aux instructions. Battery pack model number 58-E-1 58-F-1 CF-VZSU0Q Series Recommended charging condition 13.05 V / 1820 mA (Constant voltage/current) Notice Dispose of used batteries according to local ordinances and/or regulations. l Dispose of used built-in battery according to local ordinances and/or regulations. l Do not expose this computer to temperatures greater than 60°C {140°F}. Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols are only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. 53-M-1 As an ENERGY STAR® Partner, Panasonic Corporation has determined that this product meets ENERGY STAR® guidelines for energy efficiency. By enabling available power management settings, Panasonic computers enter a low-power sleep mode after a period of inactivity, saving the user energy. To learn more about power management, please visit the web site: www.energystar.gov/index.cfm?c=power_mgt.pr_power_management Outline of the International ENERGY STAR® Office Equipment Program The international ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations. For information about ENERGY STAR®, refer to the following web site: Web Site: www.energystar.gov Read Me First Energy Star 22-M-1 Safety Precautions The following safety precautions must be observed during all phases of the operation, usage, service or repair of any Personal Computer or Handheld Computer incorporating wireless WAN modem. Manufacturers of the cellular terminal are advised to convey the following safety information to users and operating personnel and to incorporate these guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions. When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer or Handheld Computer incorporating wireless WAN modem off, if instructed to do so by the guidelines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interference from Personal Computer or Handheld Computer incorporating wireless WAN modem placed close to the device. If in doubt about potential danger, contact the physician or the manufacturer of the device to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or Handheld Computer incorporating wireless WAN modem away from the pacemaker, while it is on. Switch off Personal Computer or Handheld Computer incorporating wireless WAN modem before boarding an aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communications systems. Failure to observe these instructions may lead to the suspension or denial of cellular services to the offender, legal action, or both. For details on usage of this unit in aircrafts please consult and follow instruction provided by the airline. Read Me First Regulatory Information Do not operate Personal Computer or Handheld Computer incorporating wireless WAN modem in the presence of flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting operations are in progress. Operation of any electrical equipment in potentially explosive atmospheres can constitute a safety hazard. Your Personal Computer or Handheld Computer incorporating wireless WAN modem receives and transmits radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off Personal Computer or Handheld Computer incorporating wireless WAN modem wherever forbidden, or when you suspect that it may cause interference or danger. Road safety comes first! Do not use a Personal Computer or Handheld Computer incorporating wireless WAN modem while driving a vehicle. Do not place the computer with wireless WAN modem in an area where it could cause personal injury to the driver or passengers. It is recommended to stow the unit in the boot or secure stowage area while driving. Do not place the computer with wireless WAN modem in an area over an air bag or in the vicinity where an air bag may deploy. Air bags inflate with great force and if the computer with wireless WAN modem is placed in the air bag deployment area may be propelled with great force and cause serious injury to occupants of the vehicle. IMPORTANT! Personal Computer or Handheld Computer incorporating wireless WAN modem operate using radio signals and cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless device for essential communications, for example emergency calls. Remember, in order to make or receive calls, Personal Computer or Handheld Computer incorporating wireless WAN modem must be switched on and in a service area with adequate cellular signal strength. Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock functions, fixed dialing etc.). You may need to deactivate those features before you can make an emergency call. Some networks require that a valid SIM card be properly inserted in Personal Computer or Handheld Computer incorporating wireless WAN modem. For U.S.A. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. l Consult the Panasonic Service Center or an experienced radio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 10 * Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certifi ed power level in all tested frequency bands. Although the SAR is determined at the highest certifi ed power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. 25-M-9 About FCC ID Number SAR information on this product is on file with the FCC and can be found by searching for the product’s FCC ID Number at http://www.fcc.gov/oet/ea/fccid. To find the FCC ID number for your product, first remove the battery pack from the tablet. Read Me First FCC RF Exposure Warning: l This equipment is provided with PC Card slot that could be used with wireless transmitters, which will be specifi cally recommended when they become available. Other third-party wireless transmitters have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements. l This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. l This equipment may not be collocated or operated with any other antenna or transmitter. l This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. l The exposure standard for wireless device employs a unit of measurement known as the Specifi c Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The FCC ID number is printed on the nameplate underneath. Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza Newark, NJ 07102 Support Contact: http://business.panasonic.com/support-computerstablets 6-M-1 USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1‑888‑769‑0149 65-M-2 A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. <É.-U. et Canada seulement> L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. 48-M-1 For Used in Motor Vehicle / Pour L’utilisation Dans Un Véhicule Motorisé Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side observation and navigation. If used for entertainment purpose, such as television reception or video play, it must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Check with individual state/provincial laws to determine lawful use of this product while operating within a motor vehicle. Avertissement : L’ordinateur bloc-notes peut être installé dans un véhicule motorisé et dans le champ de vision du conducteur uniquement en tant que dispositif d’aide aux fonctions du véhicule, comme par exemple pour fournir des informations sur le véhicule, comme dispositif de contrôle de système, pour l’observation à l’arrière ou sur les côtés du véhicule, ainsi que pour fournir de l’information routière. Pour toute utilisation à fin de divertissement, comme par exemple pour regarder la télévision ou jouer à des jeux vidéo, il doit être installé à l’arrière du siège du conducteur, en un emplacement où il ne sera pas visible, ni directement ni indirectement, pour le conducteur du véhicule motorisé. Vérifiez les lois fédérales et nationales qui régissent l’utilisation légale de cet appareil à l’intérieur d’un véhicule motorisé. 35-M-1 11 Regulatory Information This product contains a Coin Cell Lithium Battery which contains Perchlorate Material special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ 38-M-1 For Canada Read Me First Canadian ICES-003 CAN ICES-3(B)/NMB-3(B) 7-M-2 ISED Canada This product complies with ISED Canada’s licence-exempt RSSs. Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. ISED Canada Cet équipement est conforme aux normes sans licence RSS ISED Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut produire de brouillage, et (2) ce dispositif doit accepter le brouillage, y compris le brouillage pouvant entraîner le fonctionnement non désiré de l’appareil. 30-Ca-1-1 This product (local network devices) for the band 5150-5250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 56505850 MHz and these radars could cause interference and/or damage to LELAN devices. Cet appareil (pour réseaux locaux radioélectriques) dans les bandes de fréquences 5150-5250 MHz est réervéàune utilisation àl’intéieur afin de réuire le risque d’interféence avec les systèmes satellites mobiles bicanaux. Les radars forte puissance sont désignés comme étant les premiers utilisateurs (c’st-à-dire qu’ls ont la priorité) des bandes de fréquences 5250-5350 MHz et 5650-5850 MHz. Ces stations radars peuvent provoquer des interférences et/ou des dommages à ce périphérique. 30-Ca-2-1 12 l This computer complies with ISED Canada radiation exposure limits set forth for an uncontrolled environment. l This PC with WLAN and/or Bluetooth transmitters installed, has been approved for portable operation and does not require any minimum spacing be provided between antennas and all person’s body. FOR USE WITH MODEL NO. : CF-AA6413C, CF-AA5713A POUR UTILISER AVEC MODÈLE : CF-AA6413C, CF-AA5713A 20-Ca-1 Read Me First l Cet équipement est conforme aux limites d’exposition aux rayonnements ISED Canada établies pour un environnement non contrôlé. l Ce PC avec émetteurs WLAN et/ou Bluetooth a été approuvé à des fins d’opération mobile ; aucun espace minimum entre les antennes et le corps de l’utilisateur n’est requis. 13 Regulatory Information For Europe Read Me First Declaration of Conformity (DoC) “Hereby, Panasonic declares that this Personal Computer is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC.” Hint: If you want to get a copy of the original DoC of our above mentioned products, please contact our web address: http://www.ptc.panasonic.eu Authorised Representative: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 11, 22525 Hamburg, Germany 18-E-0 For Australia For Used in Motor Vehicle Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side observation and navigation. If the Notebook Computer is to be used for work or entertainment purposes, such as television reception, video play or other work programs, it must be installed in a position where it will NOT: (a) be visible, directly or indirectly, to the operator of the motor vehicle; or (b) cause distraction to drivers of other motor vehicles. Check with individual state laws to determine lawful use of this product while operating within a motor vehicle. If the visual display unit is, or is part of, a driver’s aid, above rule is not applied. “Driver’s aid” includes closed-circuit television security cameras, dispatch systems, navigational or intelligent highway and vehicle system equipment, rear view screens, ticket-issuing machines and vehicle monitoring devices. 35-A-1 For India Declaration of Conformity with the requirements of the e-waste (Management and Handling) Rules, 2011. (adopted by Notification S.O.1035(E) of Ministry of Environment and Forests) The Product is in conformity with the requirements of Rule 13 of the e-waste Rules. The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of the e-waste Rules: 1. Lead (Pb) - not over 0.1% by weight; 2. Cadmium (Cd) - not over 0.01% by weight; 3. Mercury (Hg) - not over 0.1% by weight; 4. Hexavalent chromium (Cr6+) - not over 0.1% by weight; 5. Polybrominated biphenyls (PBBs) - not over 0.1% by weight; 6. Polybrominated diphenyl ethers (PBDEs) - not over 0.1% by weight. For the purpose of recycling to facilitate effective utilization of resources, please return this product to a nearby authorized collection center, registered dismantler or recycler, or Panasonic service center when disposing of this product. Please see the Panasonic website for further information on collection centers, etc. http://www.panasonic.com/in/corporate/sustainability/panasonic-india-i-recycle-program.html 14 68-M-2 First-time Operation n Preparation A Check and identify the supplied accessories. If you do not find the described accessories, contact your support office. Model No: CF-AA6413C, CF-AA5713A • Soft Cloth. . . . . . 1 • Digitizer pen. . . . 1 • AC Cord. . . . . . . 1 • Battery Pack . . . 1*1 Model No: C F-VZSU0QW • Tether. . . . . . . . . 1 • Stylus. . . . . . . . . 1 • OPERATING INSTRUCTIONS - Read Me First (This book) . . . . . . . . . . . . . . . 1 *1 Stored in the tablet at the time of packing. n Latest Information on Windows 10 Getting Started • AC Adaptor. . . . . 1 When Microsoft® Windows® 10 is updated, the screen display or operation procedures may be changed. For the latest information on Windows 10, see the following web page. http://pc-dl.panasonic.co.jp/itn/addendum/ 15 First-time Operation Attaching the pen (included) to the computer Use the tether to attach the pen (included) to the computer so you will not lose it. There are holes (A) to attach it. CAUTION l Do not pull the tether with excessive force. The stylus may hit the computer, person’s body or other objects when released. Getting Started 16 Connect your computer to a power outlet A Open the cover. B Connect your computer to a power outlet. The battery charging starts automatically. CAUTION l Do not disconnect the AC adaptor until the first-time operation procedure is completed. l When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor. l Handling the AC adaptor Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. l When the DC plug is not connected to the computer, disconnect the AC cord from your electrical outlet. Power is consumed simply by having the AC adaptor plugged into an electrical outlet. 1 Open the display A Pull out the handle. l If you do not pull out the handle before opening the display, the computer may fall over due to the weight of the display. B Push down on the latch (B), and pull it out to release it. C Hold the corners with both hands, and lift the display slightly. D Hold the side of the computer with either of your hands and then lift up the display to open. CAUTION l Do not open the display wider than necessary (180° or more), and do not apply excessive pressure to the LCD. Do not open or close the computer holding the edge of the LCD segment. Turn on the computer Press and hold the power switch (D) lights. CAUTION (C) until the power indicator l Do not press the power switch repeatedly. l The computer will be forcibly turned off if you press and hold the power switch for four seconds or longer. l Do not perform the following operation until the First-time Operation is completed. Touching the release lever (E) and detach lock (F) Detaching the tablet from keyboard base Connecting or disconnecting the AC adaptor Pressing the power switch Closing the display Any changes from the default setting of the Setup Utility l Once you turn off the computer, wait for ten seconds or more before you turn on the computer again. l When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the computer does not power on even after cooling down, contact Panasonic Technical Support (è “OPERATING INSTRUCTIONS - Reference Manual”). Getting Started 17 First-time Operation Setup Windows Follow the on-screen instructions. l The computer restarts several times. l After the computer is turned on, the screen remains black or unchanged for a while, but this is not a malfunction. Wait for a moment until the Windows setup screen appears. l During setup of Windows, use the touchpad and clicking to move the pointer and to click an item. l Setup of Windows will take approximately 5 minutes. Go to the next step, confirming each message on the display. l You can set the Wireless Network after the setup of Windows is complete. If “Let’s get connected” is displayed, you can select [Skip this step]. l We recommend that you set the password after the setup of Windows in complete. Getting Started CAUTION l You can change the user name, password, image and security setting after setup of Windows. Use standard characters as a computer name: numbers 0 through 9, uppercase and lowercase letters from A to Z, and the hyphen (-) character. Do not use the following words and characters for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, LPT, &, space. If the error message “The computer name is not valid” appears, check if characters other than the above are not entered. If the error message still remains on the display, set the key entry mode to English (“ENG”) and enter characters. Restart the computer (Start). A Click (Power) - [Restart]. B Click l A portion of the Panasonic PC Settings Utility functions will be enabled after the computer restarts. 7 Update the on-screen manual A Connect to the internet. Sign in to Windows as an administrator. Connect to a network. For further information, refer to B Update the on-screen manual. Double-click [Manual Selector] on the desktop. Double-click the [Panasonic PC Settings Utility] on the desktop screen, and then click [Support] - [Manual] [Launch Manual Selector]. Follow the on-screen instructions. 18 8 Create a recovery disc A recovery disc allows you to install OS and restore its factory default condition, in case, the recovery partition of the SSD is damaged. We recommend creating a recovery disc before you begin using the computer. Refer to è OPERATING INSTRUCTIONS - Reference Manual “Important Operation/Settings” “Create a Recovery Disc” about creating the disc. NOTE B Click [Add] under “Password”. l Set the key entry mode to English (“ENG”) and enter characters. l Remember your password. If you forget the password, you cannot use Windows. Creating a password reset disk beforehand is recommended. Getting Started l To set the password, proceed as follows. (Start) (Settings) - [Accounts] - [Sign-in options]. A Click 19 Detaching the tablet from the keyboard base When detaching the tablet from the keyboard base while it is turned on, note the following points. CAUTION l Before detaching the tablet, confirm the following things. - Save the necessary data. - Close files you have opened from removable disks and network drives. - Remove peripheral devices connecting to the tablet. l Do not detach the tablet in the conditions below. When the SD Memory Card indicator is on. When playing/recording audio files or displaying motion video such as MPEG files. When playing a DVD-Video. When writing to a disc. When using communication software or network functions. A To detach the tablet while it is turned on, perform the following. CAUTION Getting Started lBefore detaching the tablet, check the remaining battery power by pressing the Fn and F9 keyboard keys at the same time. When the battery status of the “Battery 1” becomes 5% or less, can not detach the tablet from the keyboard base. in the taskbar of the desktop screen, and then click - [Eject Keyboard Base DeClick vice]. “Undock Complete” appears at the bottom right of the screen. NOTE lA confirmation message may appear if an SD memory card is inserted in the keyboard base. If “Undock Complete” appears, click [OK] in the confirmation message, and proceed to step B. The same operation can be performed by pressing the Fn and 1 keyboard keys at the same time. NOTE lTo cancel detachment, press the Fn and 1 keyboard keys at the same time after the above operation. B Release the detach lock (A). C Slide the release lever (B) in the direction of the arrow. 20 3 RELEASE D Detach the tablet from the keyboard base. CAUTION The tablet can be attached facing the reverse direction. Getting Started l When detaching the tablet from the keyboard base, hold the position at the locations dashed line circled in the illustration. CAUTION l Depending on the shape of the tablet’s rear, you may not be able to operate the unit with the tablet attached in the direction illustrated. Be sure to verify this before actual use. NOTE l Do not attach/detach the tablet in the rain. 21 Attaching the tablet to the keyboard base A Push the tablet at the locations dashed line circled in the illustration in a downward direction. Release lever (B) will return to the direction of the arrow. B Raise detach the lock (A) above. NOTE Getting Started l Confirm that the red signs near the detach lock and the release lever can not be seen. 22 RELEASE MEMO 23 Panasonic Corporation Osaka, Japan Panasonic System Communications Company of North America Two Riverfront Plaza Newark, NJ 07102 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Panasonic Australia Pty. Limited ACN 001 592 187 ABN 83 001 592 187 1 Innovation Road, Macquarie Park NSW 2113 Web Site : https://panasonic.net/cns/pc/ © Panasonic Corporation 2017 Printed in Japan HS1217-0 DHQX1427ZA/J1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Create Date : 2017:09:22 09:22:55+09:00 Metadata Date : 2017:10:05 10:49:30+09:00 Modify Date : 2017:10:05 10:49:30+09:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:dbf49562-cbad-4799-af62-99dab13bd07e Original Document ID : adobe:docid:indd:caac0688-bee1-11df-93e4-baee8964bfe5 Document ID : xmp.id:41B2D91E2C9FE711B2ABFD00BDE4FE28 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:37BE4954179DE711B1CDBCB5B5685B39 Derived From Document ID : xmp.did:A939A27ED99CE711A1E5D62FF4743173 Derived From Original Document ID: adobe:docid:indd:caac0688-bee1-11df-93e4-baee8964bfe5 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2017:09:22 09:22:55+09:00 Format : application/pdf Title : CF-20mk2_Readme(DHQX1427ZA_J1)_OI_M.indb Producer : Adobe PDF Library 10.0.1 Trapped : False GTS PDFX Version : PDF/X-1:2001 GTS PDFX Conformance : PDF/X-1a:2001 Page Count : 24 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools