Panasonic of North America JT-P100MR1 ePassport Reader User Manual p

Download:
Mirror Download [FCC.gov]
Document ID	1146555
Application ID	7SOcRLzMMy4BpFFvDGPZaQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.71kB (596419 bits)
Date Submitted	2009-07-29 00:00:00
Date Available	2009-10-27 00:00:00
Creation Date	2009-07-27 18:58:14
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2009-07-27 19:01:46
Document Title	p
Document Creator	Word 用 Acrobat PDFMaker 5.0
Document Author:	ToshioSuzuki

取扱説明書
Operating Instructions
Manuel d'utilisation
Bedienungsanleitung
Инструкция по эксплуатации
使用説明書
ePassport Reader/Lecteur de l’epassport/電子護照閱讀機
品番/Model No./No. de modèle/Modell-Nr./Модель No./型號
JT-P100MR Series
このたびは、パナソニック製品をお買い上げいただき、まことにありがとうございます。
● 取扱説明書をよくお読みのうえ、正しく安全にお使いください。
● ご使用前に「安全上のご注意」を必ずお読みください。
● この取扱説明書は、大切に保管してください。
Before attempting to connect or operate this product, please read this instruction carefully and
save this manual for future use.
Bitte lesen Sie diese Bedienungsanleitung vor dem Anschließen und der Inbetriebnahme
dieses Produkts aufmerksam durch und halten Sie sie jederzeit griffbereit.
Nous vous recommandons de lire attentivement ces instructions avant de raccorder ou
d'utiliser cet appareil et de conserver précieusement ce manuel à des fins de consultation
ultérieure.
Прежде чем приступить к подсоединению или управлению настоящим изделием, следует
тщательно изучить настоящую инструкцию и сохранить ее для будущего использования.
在連接和使用本產品前，請仔細閱讀以下說明並保存此說明書以備日後之用。
■ＬＥＤ
CAUTION: Use of controls adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
VISIBLE AND INVISIBLE LED RADIATION
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 1M LED PRODUCT
IEC60825-1+A1+A2: 2001
・ UV-LED : Wave length 375 nm / Output 700µW
* Aperture Stop Diameter Size: 7mm
* Measurement Distance from Apparent Source Location to Aperture
Stop: (*1)
(*1) Measured at the nearest point of human access for the complete unit
as the worst case measurement because the minimum distance
between the glass window and UV LED is 17.9mm which is longer
than 14mm. (The maximum power was measured along the upper
glass window.)
■ For USA
For USA
Federal Communications Commission Radio Frequency Interference
Statement
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy
and, If not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
■ For CANADA
For CANADA
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
■ For EU
For EU
This is a class A product. In a domestic environment, this product may
cause radio interference in which case the user may be required to take
adequate measures.
English
Hereby, Panasonic Corporation declare that this ePassport Reader is in
compliance with the essential requirements and other relevant provisions of
Direcive 1999/5/EC.
Česky [Czech]
Panasonic Corporation tímto prohlašuje, že tento ePassport Reader je ve
shodě se základními požadavky a dalšími příslušnými ustanoveními
směrnice 1999/5/ES.
Dansk [Danish]
Undertegnede Panasonic Corporation erklærer herved, at følgende udstyr
ePassport Reader overholder de væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
Deutsch [German]
Hiermit erklärt Panasonic Corporation, dass sich das Gerät ePassport
Reader in Übereinstimmung mit den grundlegenden Anforderungen und
den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG
befindet.
Eesti [Estonian]
Käesolevaga kinnitab Panasonic Corporation seadme ePassport Reader
vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
Español [Spanish]
Por medio de la presente Panasonic Corporation declara que el ePassport
Reader cumple con los requisitos esencialesy cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική [Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Panasonic Corporation ∆ΗΛΩΝΕΙ ΟΤΙ ePassport
Reader ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ.
Français [French]
Par la présente Panasonic Corporation déclare que l'appareil Lecteur de
l'epassport est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Italiano [Italian]
Con la presente Panasonic Corporation dichiara che questo ePassport
Reader è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian]
Ar šo Panasonic Corporation deklarē, ka ePassport Reader atbilst
Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Lietuvių [Lithuanian]
Šiuo Panasonic Corporation deklaruoja, kad šis ePassport Reader atitinka
esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands [Dutch]
Hierbij verklaart Panasonic Corporation dat het toestel ePassport Reader
in overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Malti [Maltese]
Hawnhekk, Panasonic Corporation, jiddikjara li dan ePassport Reader
jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li
hemm fid-Dirrettiva 1999/5/EC.
Magyar [Hungarian]
Alulírott, Panasonic Corporation nyilatkozom, hogy a ePassport Reader
megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv
egyéb elõírásainak.
Polski [Polish]
Niniejszym Panasonic Corporation oświadcza, że ePassport Reader jest
zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Português [Portuguese]
Panasonic Corporation declara que este ePassport Reader está conforme
com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko [Slovenian]
Panasonic Corporation izjavlja, da je ta ePassport Reader v skladu z
bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky [Slovak]
Panasonic Corporation týmto vyhlasuje, že ePassport Reader spĺňa
základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi [Finnish]
Panasonic Corporation vakuuttaa täten että ePassport Reader tyyppinen
laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Svenska [Swedish]
Härmed intygar Panasonic Corporation att denna ePassport Reader står I
överensstämmelse med de väsentliga egenskapskrav och övriga relevanta
bestämmelser som framgår av direktiv 1999/5/EG.
Íslenska [Icelandic]
Hér með lýsir Panasonic Corporation yfir því að ePassport Reader er í
samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun
1999/5/EC.
Norsk [Norwegian]
Panasonic Corporation erklærer herved at utstyret ePassport Reader er i
samsvar med de grunnleggende kravog øvrige relevante krav i direktiv
1999/5/EF.
The declaration of conformity may be consulted at
http://www.doc.panasonic.de
Importer’s name and address to follow EU rules:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F. R. Germany
Class 1 Device CE1731
■ For Taiwan
甲類
此設備經測試證明符號BSMI（經濟部標準檢驗局）之甲類數位裝置的限制規定。這些
限制的目的是為了在商業環境中使用此設備時，能提供合理的保護以防止有害的干
擾。此設備會產生、使用並散發射頻能量：如果未導照製造廠商的指導手冊來安裝和
使用，可能會干擾無線電通訊。請勿在住宅區使用此設備。
警告使用者：
這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在
這種情況下，使用者會被要求采取某些適當的對策。
●保固政策
保固期和保固範圍根據應用、合約或者經銷商而定。請向經銷商詢問。
<注>
以下情況不在保固範圍內：
- 由用戶所造成的如掉落、浸水或者其他非設計用途的使用等任何損害。
●認證說明
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得
擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現
象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備
之干擾。
EMI (Electro Magnetic Interference)
Warning:
This is a class A product. In a domestic environment, this product may
cause radio interference in which case the user may be required to take
adequate measures.
Warnung:
Dies ist ein Produkt der Klasse A. Wenn im Heim betrieben, kann das
Produkt Hochfrequenzstörungen verursachen, gegen die der Benutzer u.U.
geeignete Maßnahmen treffen muss.
Avertissement:
Il s'agit d'un produit de classe A. Dans un environnement privé, ce produit
risque de créer des interférences radio auquel cas des mesures correctives
adéquates peuvent être exigées de la part de l'utilisateur.
Предупреждение:
Это изделие класса А. В домашних условиях данное изделие может
вызвать радиопомехи, что может требовать от пользователя принятия
соответствующих мер.
ENGLISH
CONTENTS
Limitation of liability .......... 11
Disclaimer of warranty...... 11
Precautions ...................... 12
■ Descriptions about the ePassport Reader main unit ......................... 12
■ Descriptions about the AC adapter and AC cord ............................... 14
1. Requirements for use ... 15
2. Confirmation of the main
unit and accessories........... 19
3. Names of parts and their
functions ........................... 20
■ Rear view ........................................................................................... 21
4. Outlined description of
operation........................... 22
4-1 Example of system configuration...................................................... 22
4-2 Example of operation ........................................................................ 23
5. Troubleshooting............ 25
6. Specifications ............... 26
10
Limitation of liability
THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT
OF THE THIRD PARTY’S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR
TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE
INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF
THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT(S).
Disclaimer of warranty
IN THE EVENT IF THERE IS ANY MALFUNCTION OR FAILURE OF THIS
PRODUCT, PANASONIC CORPORATION SHALL REPAIR OR REPLACE
THE PRODUCT AS PROVIDED IN THE WARRANTY.
IN NO EVENT SHALL PANASONIC CORPORATION BE LIABLE TO ANY
PARTY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGE, LOSS OR INCONVENIENCES TO ANY
PARTY RELATING TO, REGARDLESS OF THE CAUSE, INCLUDING BUT
NOT LIMITED TO;
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION,
DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR
EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY
INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE
USER;
(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF
THE PRODUCT BY THE USER;
(4) ANY PROBLEM CAUSING FAILED SIGNAL TRANSMISSION
RESULTING IN CONSEQUENTIAL INCONVENIENCE, LOSS OR
DAMAGE, ARISING OUT OF CAUSE SUCH AS SYSTEM
MALFUNCTION, FAULT, SETUP OR INSTALLATION;
11
Precautions
■ Descriptions about the ePassport Reader main unit
Do not use this product near electronic equipment that requires highly
accurate control or handles week signals.
Failure to observe this may cause malfunction with the electronic
equipment.
* Examples of electronic equipment to be paid attention to
Hearing aid, implanted cardiac pacemaker, implanted defibrillator,
other medical electric equipment, fire alarm, automatic door, other
automatic control equipment, etc.
When an implanted cardiac pacemaker, an implanted defibrillator, or
other medical electric devices are used, consult the corresponding
medical device manufacturer or dealer about the effects of radio
emissions.
Do not insert objects inside the product.
Failure to observe this may cause fire or electric shock due to short-circuit or
high heat generation.
Do not view directly with optical instruments.
Class 1M LED product
Do not attempt to disassemble or modify the product.
Failure to observe this may cause fire or electric shock due to short-circuit or
high heat generation.
Do not water it or get it wet.
Failure to observe this may cause smoke generation or ignition.
Stop using the unit immediately if any fault is detected.
There is risk of fire if you continue to use the unit after smoke or odor is
detected.
Do not apply a strong impact or drop an object on the glass part.
Broken glass may cause injury.
If the glass is cracked or broken, stop using this product without touching it
and contact the maintenance service company.
12
Do not put the main unit on an unstable place.
Failure to observe this may cause device falling and consequently injury or
unit trouble.
Do not put the main unit on a place with moisture, dirt, greasy fumes,
or steam.
Failure to observe this may cause fire, electric shock or unit trouble.
13
Precautions
■ Descriptions about the AC adapter and AC cord
Use caution not to damage the AC adapter, AC cord, or power plug.
(scratching, modifying, placing near heat, bending excessively, twisting,
stretching, weighing down or bundling)
Using a damaged power cable or plug may cause electric shock, short
circuit or fire.
Do not handle the power plug or power cable with wet hands.
Failure to observe this may cause electric shock.
Do not exceed the ratings of inlet and wiring, and operate the product
only within 100 - 240 V AC.
Multiple circuits wiring exceeding the rating may result in overheating and
fire.
Dust the power plug periodically.
If dust accumulates on the plug, insulation failure caused by humidity occurs
and there is a risk of fire.
Unplug the power plug and wipe it with a dry cloth.
Insert the power plug all the way.
Inserting the plug halfway may cause electric shock, overheating or fire. Do
not use a damaged plug or loosened AC outlet.
Be sure to use the supplied AC adapter and power cable.
If any parts are used deviating from their specifications, this may cause fire
or malfunction.
14
1. Requirements for use
To use this unit correctly, please observe the points specified below.
● System overall
・ This unit works as part of the overall system including host equipment
(such as a personal computer, etc.). This unit cannot work
independently.
・ In regard to overall system structuring including host equipment,
please contact the SI (System Integration) company.
The user alone cannot achieve system structuring.
・ Operation of this unit may differ according to the application software
adopted by host equipment. Detailed information about operation is
obtainable from the relevant instruction manual furnished by the SI
company.
● Personal information
・ This unit is used to read out personal information of a passport and the
acquired data are transferred to the host equipment. This unit itself has
no function to save data, but it is advised to be careful in the handling
of personal information while it is being transferred to the host
equipment.
● Non-contact type IC reader/writer (proximity wireless)
・ This unit is provided with a 13.56MHz proximity wireless function for
the non-contact type IC reader/writer.
・ If any radio transmitter or equipment bearing strong magnetism is used
in the proximity of this unit, the unit may be affected to cause failure in
reading out of the non-contact IC.
● Handling of the main unit
・ This unit is a precision instrument. You have to handle it carefully.
Do not give impact on it or put a heavy article on it.
・ The illumination lamp flashes when the unit performs data reading from
sources such as a passport.
Do not look at the lamplight to avoid eye fatigue or hurt.
・ The maintenance connector block is intended for maintenance
servicing to be carried out by the manufacturer or its authorized
maintenance company. It cannot be used on user’s side.
15
● Installation and environment
・ This unit can be installed only by an SI or such company authorized by
the manufacturer. It cannot be installed by any user.
・ This unit is designed for business use.
This unit shall not be used for household purposes. Failure to observe
this may cause jamming.
・ This unit cannot be installed in the places specified below.
・ Outdoors
・ Where humidity is high or very much dust is prevalent
・ Where direct exposure to the sunlight is anticipated
・ In the vicinity of air-conditioner or blow-out outlets
・ Where strong magnetism is prevalent
・ In the vicinity of TV or radio receivers
・ In the vicinity of radio wave transmitter or its antenna
■ Maintenance
・ Maintenance servicing should be given through conclusion of a
maintenance service contract with a maintenance company authorized
by the manufacturer.
・ In the case of a fault caused in this unit, immediately contact the
relevant maintenance company.
■ Platen
・ Make sure not to press the glass surface with a strong force or drop an
embossed or heavy article on it. Otherwise, the glass may be broken.
If the glass should be broken, immediately stop using the unit and
consult the maintenance company.
・ If the glass surface is contaminated by fingerprints or others, data
readout may be suspended.
Do not touch the glass surface with bare hands or contaminate it.
16
・ When moving or carrying this unit, do not tough the glass surface by
hand or take hold of the upper limiter guide.
Guide
■ Care
・ Be sure to turn off the power before taking care of this unit.
・ For cleaning, use dry cloth or the like. Do not use thinner, benzine,
alkaline detergent, alcoholic detergent, or the like.
・ The glass surface should be cleaned occasionally.
■ Software, etc.
・ This unit is not provided with any software for host equipment (driver
software, SDK, application software, etc.).
Software for host equipment will be furnished as a system by the SI
company.
・ For one unit of this product, software for host equipment can be
installed and used, limited to one unit of host equipment to be
connected and used with. In regard to more detailed information about
the license rules for the system overall, please contact the SI company
for confirmation.
[Prohibition items]
The user cannot take the actions specified below without any
permission by the manufacturer or the authorized SI companies.
・ The software relating to this unit is used for any other applications
than the original purpose.
・ The software relating to this unit is given to, lent to, or permitted
for reuse to the third party, or any right relating to this software is
transferred.
・ The software relating to this unit is copied, duplicated, or used in
multiple host equipment units.
・ The software integrated in this unit and related software are
modified or their basic ideas are changed for reverse engineering,
reverse compiling, and reverse assembly.
17
・ The Libjpeg library included in this unit belongs to the IJG authorship.
Portions of this product are based in part on the work of the
Independent JPEG Group.
18
2. Confirmation of this product
Check and identify the Main unit and following accessories when you first
open the package.
1) Main unit
2) Accessories
･AC adapter
･USB cable
(Model No. TAZ4CD0812H)
(Model No. K1HY04YY0037)
･ Instruction manual (this doccument)
1 copy
■ Preparation of AC cord (Optional Accessary)
To use this product, AC cord (Model No. JT-P100AC-＊＊, ＊＊is different
by AC-plug shape), optional accessary, needs to be prepared seperately.
AC cord is connected to AC adapter.
Prepare the suitable AC cord for the place where this product is used.
19
3. Description of Parts
■ Top view
②
①
⑦
③
④
⑥
⑤
No.
①
②
③
Name
POWER
indicator
MANUAL
switch
ERROR
indicator
④
IC indicator
⑤
READY
indicator
⑥
Platen
⑦
Passport
placing guide
Explanatory
Label
⑧
⑧
Function
Green: Power On Off: Power Off
Press this switch to start manual passport readout
operation when “Ready indicator” lights green.
Red: Error occurs (exept start-up process after
Power switch turned on)
Off: Normal status
Blinking Orange: Reading the IC data
(exept start-up process after Power switch
turned on)
Off: Stop RF communication
Green: Ready to start passport readout operation
(exept start-up process after Power switch
turned on)
Off: On Reading process or
unable to start passport readout operation
This is a passport image data readout surface.
(This is made with glass.)
This is a guide to place the passport to the correct
area.
“Class 1M LED Product” label
20
■ Rear view
①
②
No.
①
Name
POWER switch
②
MAINTENANCE
Port
③
USB Port
④
⑤
COM Port
DC IN 12V Jack
③
④
⑤
Function
Press white [・] mark printed side: Power ON
Press non printed side: Power OFF
Port for maintenance servicing.
Do not connect any connectors for normal
operating.
Port for USB cable of which the other side is
connected to Host computer.
Option
DC Jack to connect appropriate AC adapter
output cable.
< Cable connection >
AC adapter output
cable
USB cable
21
4. Operation
4-1 Example of system configuration
An example of system configuration for this product is shown as follows.
Refer to the system specifications for more detailed information on actual
system configuration.
ePassport reader
USB cable
AC adapter
Output cable
AC cord
(Option)
AC adapter
Note:
・ Do not use the AC cord and AC adaptor of this unit with other devices.
Also, do not use the AC cords and AC adaptors of other devices with
this product.
22
4-2 Example of operation
An example of operation for this product is shown as follows.
For more detailed information, refer to the operating instruction manual of
each system including this product.
(1) Turn the POWER switch ON.
The POWER indicator lights green and the other three indicator light or
blink. In the meantime, the READY indicator stops blinking and turns
off.
(2) Confirm that the READY indicator is lighting.
The READY indicator lights green when this product has received the
specified command from the USB Port which is connected to the host
equipment (personal computer, etc.) with USB cable.
While the “READY lamp” is not lighting, it cannot start passport readout
operation. In such a case, to start passport readout operation, check
the operating procedure of the host system or USB cable connections.
(3) Set passport
Put the portrait page of the passport
against the platen along the guide and
set the passport.
When the set passport is automatically
detected, the READY indicator turns off
and it starts reading the passport data.
If the READY indicator is still lighting
even after the passport has been set,
press the “MANUAL switch” then the
READY indicator turns off and it starts
reading the passport data.
While reading the IC data, the IC indicator
keeps on blinking.
23
Guide
(4) Complete reading passport data
Upon the completion of the passport and IC data readout, the READY
indicator lights again.
Imporant:
・ In some cases, indications such as “readout compleate” or “error” or
“retry” may be displayed at the host equipment. Refer to the operating
instruction of each system to continue operation.
・ Extraction of the passport in the arrow direction allows smooth
operation.
Note:
・ If the passport cannot be detected automatically, press the MANUAL
switch to start readout operation.
24
5. Troubleshooting
Problem
The POWER indicator
is not lit when Power
switch is turned on.
The READY indicator
is not lit.
Readout operation is
not started even
though the passport
has been set.
OCR Characters
cannot be read out
correctly.
The IC indicator is
blinking.
The ERROR indicator
is lit.
Cause / Solution
Probably, the AC adapter is not connected.
→ Connect it assuredly.
● The connected host equipment (personal
computer, etc.) is not in operation.
→ Let it operated.
● The USB cable is not connected.
→ Connect it assuredly.
● The passport does not touch the Guide.
→ Let it touch the guide assuredly.
● The passport is too thick and automatic
detection fails.
→ Start readout operation by pressing the
MANUAL switch.
● The Platen is not clean.
→ Clean the glass.
● The passport is deformed.
→ Correct the passport shape.
● IC data readout is not complete.
→ Set the passport on the Platen.
● Set the passport again and retry passport
readout operation.
● Though having retryed passport readout
operation, the indicator does not turn off.
→ Turn off the Power swich and then turn on
the switch again.
● The connected host equipment (personal
computer, etc.) is not in operation.
→ Let it operated.
No operation starts
even though the
MANUAL switch is
pressed.
If the present problem has not been solved even after the above-mentioned
action had been taken, refer servicing to qualified service personnel.
25
6. Specifications
■ Main unit:
Items
Readable documents
OCR
Functions
Readable
characters
Detection
of the
document
OCR
Processing
Time
OCR
accuracy
Image
Scanning
Scanning
Area Size
Function
Resolution
Image
Capture
Mode
Barcode readout function
Contactless IC Reader
function
Operation switches
Specifications
ICAO Doc9303-1 (TD3 size)
ICAO Doc9303-3 (TD1size)
MRV
ISO 1073/1 OCR B font size 1
Numeric: 0 - 9
Alphabets: A - Z (Capital letters)
Symbol marks: <
Auto detection by optical sensing method or
manual start by the MANUAL switch
pressing.
Approx.1 sec. (*1)
98% or above (by Passport) (*1)
* Except dirty and damaged OCR
127 mm × 90 mm
Approx. 240 dpi
White light illumination mode (Color images)
Infrared (IR) light illumination mode
Ultraviolet (UV) light illumination mode
Code39, QR-code (Model 2), PDF417 (*2)
ISO/IEC14443 Type A and B:
Baud rate 106 - 847kbps (automatic baud
rate adjust function)
Frequency: 13.56 MHz
IC data structure and read protocol:
Doc9303 Part1 6th Edition
Basic Access Control (BAC)
Active Authentication (AA)
POWER switch
MANUAL switch
26
Items
Indicatiors
External interface
Self-diagnostic
functions
Operating
environment
Power supply
External
dimensions
Mass
Accessories
Optional Accessories
Specifications
POWER indicator: Green
READY indicator: Green
ERROR indicator: Red
IC indicator: Orange
USB 2.0 × 1
(RS-232C × 1 (*3))
Self-diagnostic functions are provided to the
hardware and notification is possible to the
host equipment.
Operating temperature: +5 - +40 ℃
Humidity: 20 - 80% (Non condensing)
DC 12V, 0.7A
Approx. W190 × D200 × H130 mm
(without accessories)
* Readout surface height: Approx. 115 mm
Approx. 2.3 kg (without accessories)
AC adapter, USB cable,
Operating Instruction
AC cord (JT-P100AC-＊＊) (*4)
■ AC adapter:
Items
Input
Output
Specifications
100V - 240V AC, 50/60Hz (*5)
12V DC, 2.5A
Notes:
*1 According to Panasonic test standards.
*2 Barcode readout function may not be appropriately performed
depending on the printing quality or code variation.
*3 RS-232C; Optional function
*4 AC cord; Option Accessories
[Model number] JT-P100AC-J0; Japan Version,
JT-P100AC-F0; Europe version (excluding UK),
JT-P100AC-E0; UK Version,
JT-P100AC-U0; North America version,
JT-P100AC-W0; Taiwan Version
27
*5 JT-P100AC-J0; Connect the AC code with the outlet of AC100 V.
JT-P100AC-U0; Connect the AC code with the outlet of AC120 V.
JT-P100AC-W0; Connect the AC code with the outlet of AC110 V.
Information on Disposal for Users of Waste Electrical & Electrical
Equipment
This symbol on the products and/or accompanying documents means that used
electrical and electronic products should be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to
designated collection points, where they will be accepted on a free of charge basis.
Alternatively, in some countries you may be able to return your products to your
local retailer upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could
otherwise arise from inappropriate waste handling. Please contact your local
authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation.
For business users in the European Union
If you wish to discard electrical and electrical equipment, please contact your
dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer
and ask for the correct method of disposal.
28
© Panasonic Corporation 2009
N0906-0
29
3TR6232AAA
Printed in Japan

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2009:07:27 19:01:46+09:00
Create Date                     : 2009:07:27 18:58:14+09:00
Page Count                      : 29
Creation Date                   : 2009:07:27 09:58:14Z
Mod Date                        : 2009:07:27 09:58:14Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : ToshioSuzuki
Metadata Date                   : 2009:07:27 09:58:14Z
Creator                         : ToshioSuzuki
Title                           : p
Page Mode                       : UseNone
Tagged PDF                      : Yes

EXIF Metadata provided by EXIF.tools