Panasonic of North America N2QBYB000005 Remote Controller User Manual tc p54z1 eng 2488 indb

Download:
Mirror Download [FCC.gov]
Document ID	1068533
Application ID	D+iHueZxAaw6/mSRZMnDjQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	127.91kB (1598856 bits)
Date Submitted	2009-02-15 00:00:00
Date Available	2009-04-01 00:00:00
Creation Date	2009-01-30 16:26:28
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-02-06 15:03:49
Document Title	tc_p54z1_eng_2488.indb
Document Creator	Adobe InDesign CS2_J (4.0.5)
Document Author:	win12

Operating Instructions
54” Class 1080p Plasma HDTV
(54.1 inches measured diagonally)
Manual de instrucciones
Televisión de alta definición de 1080p y clase 54” de Plasma
(54,1 pulgadas medidas diagonalmente)
Model No.
Número de modelo
TC-P54Z1
Quick Start Guide
(See page 8-18)
Guía de inicio rápido
(vea la página 8-18)
TENTATIVE
For assistance (U.S.A./Puerto Rico), please call:
1-877-95-VIERA (958-4372)
or visit us at www.panasonic.com/contactinfo
Customer’s Record
The model number and serial number of this product can be found on its back cover. You should note this serial number in
the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid
in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
For assistance (Canada), please call:
1-866-330-0014
or visit us at www.vieraconcierge.ca
Para solicitar ayuda (EE.UU./Puerto Rico), llame al:
1-877-95-VIERA (958-4372)
ó visítenos en www.panasonic.com/contactinfo
Serial Number
Anotación del cliente
El modelo y el número de serie de este producto se encuentran en su panel posterior. Deberá anotarlos en el espacio
provisto a continuación y guardar este manual, más el recibo de su compra, como prueba permanente de su adquisición,
para que le sirva de ayuda al identificarlo en el caso de que le sea sustraído o lo pierda, y también para disponer de los
servicios que le ofrece la garantía.
Modelo
TM
ViVA
Número de serie
HD3D Sound
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Web Site: http://panasonic.net/
© Panasonic Corporation 2009
Español
Printed in Japan
PBS0109F0
Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro.
Las imágenes mostradas en este manual tienen solamente fines ilustrativos.
TQB2AA2488
Turn your own living room into a movie theater!
Experience an amazing level of multimedia excitement
Contents
Please read before using the unit
Safety Precautions ······································· 4
Notes ···························································· 7
Enjoy rich multimedia
Camcorder
Personal
computer
Set Top Box
Amplifier
Home theater
system
DVD player/
Blu-ray Disc player
DVD recorder/
Blu-ray Disc recorder
Manufactured under license from
Dolby Laboratories.
Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
How to Use Menu Functions
(picture, sound quality, etc.) ······················· 40
VIERA LinkTM “HDAVI ControlTM” ················ 44
Network setting ·········································· 50
VIERA CAST setting ·································· 52
Lock ··························································· 54
Editing and Setting Channels····················· 56
Closed Caption ·········································· 58
Input Labels/Audio Out ······························ 59
Using Timer ················································ 60
Remote control setting ······························· 61
Recommended AV Connections ················ 62
FAQs, etc.
HD3D Sound
Manufactured under
license from BBE Sound,
Inc.
Licensed by BBE Sound, Inc. under
one or more of the following US
patents: 5510752, 5736897.
BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.
Ratings List for Lock ·································· 63
Technical Information ································· 64
Care and Cleaning ····································· 68
Specifications ············································· 69
FAQ ···························································· 70
Limited Warranty
(for U.S.A. and Puerto Rico only)··············· 72
Customer Services Directory
(for U.S.A. and Puerto Rico) ······················ 73
Limited Warranty (for Canada) ··················· 74
FAQs, etc.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC.
This product qualifies for ENERGY
STAR in the “Home” setting and this is
the setting in which energy savings will
be achieved. Any modifications to the
“Home” setting or other factory default
settings could result in greater energy
consumption beyond levels that meet
ENERGY STAR qualifications.
ViVA
SDHC Logo is a trademark.
Watching TV··············································· 25
Using VIERA TOOLS ································· 27
Viewing from an SD Card ·························· 28
Watching Videos and DVDs ······················· 32
VIERA CASTTM ··········································· 34
Network Camera ········································ 36
Displaying PC Screen on TV ····················· 38
Advanced
DIGITAL TELEVISION TRANSITION NOTICE
This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable
antenna, after the end of full-power analog TV broadcasting in the United States (as required by law) on February 17,
2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital
programming, but should continue to work as before for other purposes (e.g., for watching low-power TV stations still
broadcasting in analog, watching pre-recorded movies, or playing video games). When a Converter is used with an older
television receiver, a signal splitter might be necessary to continue to receive low-power analog broadcasts via an antenna.
For more information, please see www.DTV.gov. For information on the TV Converter program, and on government
coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call the NTIA at 1-888-DTV-2009. Please
check with your cable or satellite service provider if you have questions about your cable or satellite set-top box.
VIERA CAST™ is a trademark of
Panasonic Corporation.
Basic Features
Advanced Features
TENTATIVE
VIERA Link™ is a trademark of Panasonic
Corporation.
Enjoy your TV!
Viewing
VCR
Accessories/Optional Accessory ····· 8
Basic Connection ··························· 15
Identifying Controls ························ 19
First Time Setup····························· 21
Quick Start
Guide
Quick Start Guide
SD memory card
HDAVI Control™ is a trademark of Panasonic Corporation.
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
WARNING:
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to persons.
The exclamation point within
a triangle is intended to
tell the user that important
operating and servicing
instructions are in the papers
with the appliance.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).
Important Safety Instructions
1)
2)
3)
4)
5)
6)
7)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments / accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart /
apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the
AC cord power plug is securely connected.
WARNING/CAUTION
WARNING
Small parts can present choking hazard if accidentally
swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects, including
packaging materials and plastic bags/sheets to prevent
them from being played with by young children, creating
the potential risk of suffocation.
Set up
This Plasma TV may fall and can cause personal injury or
even death if not installed correctly. To prevent personal injury
or death, follow these warnings:
Install the Plasma TV in accordance with the
manufacturer’s recommended pedestal or stand,
corresponding hardware and installation instructions.
This Plasma TV is for use only with the following optional
accessories. Use with any other type of optional accessories
may cause instability. The following accessories are
manufactured by Panasonic Corporation.
• Wall-hanging bracket (Vertical) TY-WK5P1SW
Be sure to ask a qualified technician to carry out the
installation and set-up.
Two or more people are required to install or remove the
television.
Some wall mounts (wall-hanging brackets) are not
designed to be mounted to walls with steel studs or old
cinder block constructions.
Ask your dealer or licensed contractor to properly secure the
wall-hanging bracket.
Do not place the Plasma TV or its stand on a sloped or
unstable surface.
The Plasma TV may fall or tip over.
Do not support the Plasma TV on a non-specified
pedestal.
Do not place the Plasma TV on furniture that can easily
be used as steps, such as a chest of drawers.
Do not climb or allow children to climb on the Plasma TV
Place or install the Plasma TV where it cannot be pushed,
pulled over or knocked down.
Route all cords and cables such that they cannot be
tripped over or pulled by curious children.
Do not place any objects on top of the Plasma TV.
If water spills onto the Plasma TV or foreign objects get
inside it, a short-circuit may occur which could result in fire
or electric shock. If any foreign objects get inside the Plasma
TV, please consult an Authorized Service Center.
AC Power Supply Cord
To prevent fire or electric shock:
The Plasma TV is designed to operate on a 120 V AC,
60 Hz service. Insert the power cord plug as far as it will
go into the wall socket.
If the plug is not fully inserted, heat may generate, which
could cause a fire.
The included power cord is for use with this unit only.
Do not use any power cord other than that provided with
this TV.
Do not handle the power cord plug with wet hands.
Do not do anything that might damage the power supply
cord.
When disconnecting the power supply cord, hold the
plug, not the cord.
Do not use the power supply cord if the plug or cord is
damaged.
Replace the cord or contact your Authorized Service Center
Handling the power supply cord
Insert the power plug fully into the socket outlet. (If the
power plug is loose, it could generate heat and cause fire.)
Ensure that the power plug is easily accessible.
Ensure the earth pin on the power plug is securely
connected to prevent electrical shock.
• An apparatus with CLASS I construction shall be connected to
a power socket outlet with a protective earthing connection.
Do not touch the power plug with a wet hand. (This may
cause electrical shock.)
Do not use any power cord other than that provided with
this TV. (This may cause fire or electrical shock.)
Do not damage the power cord. (A damaged cord may
cause fire or electrical shock.)
• Do not move the TV with the cord plugged in the socket outlet.
• Do not place a heavy object on the cord or place the cord
near a high-temperature object.
• Do not twist the cord, bend it excessively, or stretch it.
• Do not pull on the cord. Hold onto the power plug body
when disconnecting cord.
• Do not use a damaged power plug or socket outlet.
Radio waves
Do not place this TV in any medical institutions or
locations with medical devices.
Radio waves from this TV may interfere with the medical
devices and cause accidents due to the malfunction.
Do not use this TV near any automatic control devices
such as automatic doors or fire alarms.
Radio waves from this TV may interfere with the automatic
control devices and cause accidents due to the malfunction.
Keep the RF remote control and Monitor Tuner away
at least 8.7 inches (22 cm) from the location where a
cardiac pacemaker is implanted.
Radio waves from this TV may interfere with the operation of
the pacemaker.
If Problems Occur During Use
If a problem occurs (such as no picture or no sound),
or if smoke or an abnormal odor is detected from the
Plasma TV, unplug the power supply cord immediately.
Continued use of the TV under these conditions might cause
a fire or permanent damage to the TV. Have the TV evaluated
by an Authorized Service Center. Servicing of the TV by
unauthorized personnel is strongly discouraged due to its
high voltage.
If water or an object gets inside the Plasma TV, if the
Plasma TV is dropped, or if the enclosure becomes
damaged, unplug the power supply cord immediately.
A short-circuit may occur, which could cause a fire. Contact
an Authorized Service Center for an evaluation.
CAUTION
Do not cover the ventilation holes.
Doing so may cause the Plasma TV to overheat, which can
cause a fire or damage to the Plasma TV.
Leave a space of 3 15/16” (10 cm) or more at the top, left
and right, and 2 3/4” (7 cm) or more at the rear.
When using the pedestal, keep the space between the
bottom of the TV and the pedestal or stand surface clear
from objects that may obstruct ventilation.
When Moving the Plasma TV
Be sure to disconnect all cables before moving the
Plasma TV.
Moving the TV with its cables attached might damage the
cables which, in turn, can cause fire or electric shock
To prevent an electric shock, disconnect the power
plug from the wall outlet as a safety precaution before
carrying out any cleaning.
Transport only in upright position
Transporting the unit with its display panel facing upright or
downward may cause damage to the internal circuitry.
Using a dry cloth, clean any dust from the power supply
cord and plug regularly.
Build-up of dust on the power cord plug can increase
humidity, which might damage the insulation and cause a fire.
This Plasma TV radiates infrared rays;
therefore, it may affect other infrared communication
equipment. Install your infrared sensor in a place away from
direct or reflected light from your Plasma TV.
The TV will still consume some power as long as the power
supply cord is connected to the wall outlet.
Display panel is made of glass. Do not apply strong force
or impact to the display panel.
This may cause damage resulting in injury.
The TV is heavy. TV should be handled by 2 or more
people. Support as shown to avoid injury by the TV
tipping or falling.
Safety Precautions (Continued)
FCC STATEMENT
FCC RF Exposure Warning:
• RF remote control and WirelessHD complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• To comply with FCC RF exposure requirements, RF remote control and WirelessHD must not be installed nor operated within
20 cm (8 inches) range of the RF remote control and WirelessHD or any human body (excluding extremities).
• RF remote control and WirelessHD may not be placed or operated with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic
Corp. of North America could void the user’s authority to operate this device.
FCC Declaration of Conformity
Model No. TC-P54Z1
Responsible Party:
Contact Source:
email:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Consumer Electronics Company
1-877-95-VIERA (958-4372)
consumerproducts@panasonic.com
CANADIAN NOTICE:
For Model TC-P54Z1
This Class B digital apparatus complies with Canadian ICES-003.
CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or
installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause
personal injury or even death.
The consumer electronics industry (of which Panasonic is a member) is committed to making home
entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety
guidelines:
TUNE INTO SAFETY:
•
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use
of your flat panel display.
•
Carefully read and understand all enclosed instructions for proper use of this product.
•
Don’t allow children to climb on or play with furniture and television sets.
•
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
•
Remember that children can become excited while watching a program, especially on “larger than life”
flat panel displays. Care should be taken to install the display where it cannot be pushed, pulled over,
or knocked down.
•
Care should be taken to route all cords and cables connected to the flat panel display so that they
cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
•
Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
•
Follow all instructions supplied by the display and wall mount manufacturers.
•
If you have any doubts about your ability to safely install your flat panel display, contact your retailer
about professional installation.
•
Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not
designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure,
contact a professional installer.
•
A minimum of two people are required for installation. Flat panel displays can be heavy.
Panasonic recommends that a qualified installer perform the wall-mount
installation. See page 5.
Notes
Do not display a still picture for a long time
This causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is not covered by the warranty.
To prevent “Image retention”, the screen saver is
12
4:3
automatically activated after a few minutes if no signals are
sent or no operations are performed. (p. 63)
Typical still images
number and other logos
• Channel
displayed in 4:3 mode
• Image
• SD Card photo • Video game • Computer image
■ Set up
Do not place the unit where it’s exposed to sunlight or other bright light (including reflections).
Use of some types of fluorescent lighting may reduce the remote control’s transmission range.
Accessories/Optional Accessory
Accessories
Attaching the pedestal to TV
■Assembling the pedestal
Check you have all the items shown.
Accessories
Fix securely with assembly screws A . (Total 4 screws)
Tighten screws firmly.
RA CAST
VIERA
N2QAYB000005
Batteries for the Remote
Control Transmitter (2)
AC cord
Cleaning cloth
Accessories
Pole
AA Battery
OLS
A TO
Lin
VIE
IER
Remote Control
Transmitter
Assembly screws
(4 of each)
M5 x 18 (Silver)
TENTATIVE
Monitor tuner
Wireless HD
(Receiving unit)
Wireless HD
(Sending unit)
Quick Setup Guide
M5 x 25 (Black)
TBLX0102
How to assemble
(p. 9)
■Set-up
Bottom view
RS232C terminal
Specifications
Rear side
Note
Wall-hanging bracket
(vertical)
TY-WK5P1SW
L or R is printed at the
bottom of the poles.
Base (1)
TENTATIVE
Arrow
mark
In order to maintain the TV’s performance and safety, be absolutely sure
to ask your dealer or a licensed contractor to secure the wall-hanging
brackets.
Carefully read the instructions accompanying the plasma TV stand or
pedestal, and be absolutely sure to take steps to prevent the TV from
tipping over.
Handle the TV carefully during installation since subjecting it to impact
or other forces may cause its panel to crack.
Carry out work on a horizontal and level surface.
Tighten screws firmly.
Optional Accessory
TENTATIVE
Hole for pedestal
installation
Pole
Fix securely with assembly screws B .
(Total 4 screws)
Pole
Base
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Installing the remote’s batteries
Caution
Close
Pull open
Hook
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
not mix old and new batteries.
• Do
not mix different battery types
• Do
(such as alkaline and manganese
Note the correct
polarity (+ or -).
batteries).
not use rechargeable (Ni-Cd)
• Do
batteries.
Do not burn or break batteries.
Poles (2)
Base
Accessories/Optional Accessory
Product Registration Card
(U.S.A.)
Customer Care Plan Card
(U.S.A.)
Pedestal
TENTATIVE
Operating Instructions
Front
Quick Start
Guide
L Pole
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Technical Information (Continued)
TC-P54Z1
Pin No.
9 10
Pin No.
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Pin No.
Signal Name
NC (not connected)
NC
HD/SYNC
VD
NC
Display panel
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lintfree cloth.
If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap diluted
by 100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the
display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.
Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile
substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.
Standby condition
x.x W
Drive method
Aspect Ratio
Visible screen size
(W × H × Diagonal)
AC type
16:9
50 ” class (49.9 inches measured diagonally)
43.5 ” × 24.4 ” × 49.9 ”
(1,105 mm × 622 mm × 1,268 mm)
2,073,600 (1,920 (W) × 1,080 (H))
[5,760 × 1,080 dots]
VHF/ UHF: 2 - 69, CATV: 1 - 135
Operating Conditions
Temperature:
32 °F – 104 °F (0 °C – 40 °C)
Humidity:
20 % – 80 % RH (non-condensing)
VIDEO:
RCA PIN Type × 1 1.0 V [p-p] (75 Ω)
S-VIDEO:
Mini DIN 4-pin
Y: 1.0 V [p-p] (75 Ω)
AUDIO L-R:
RCA PIN Type × 2 0.5 V [rms]
VIDEO:
RCA PIN Type × 1 1.0 V [p-p] (75 Ω)
AUDIO L-R:
RCA PIN Type × 2 0.5 V [rms]
Y:
1.0 V [p-p] (including synchronization)
PB, PR:
±0.35 V [p-p]
AUDIO L-R:
RCA PIN Type × 2 0.5 V [rms]
TYPE A Connector × 4
This TV supports “HDAVI Control 4” function.
D-SUB 15PIN:
R,G,B / 0.7 V [p-p] (75 Ω)
HD, VD / 1.0 - 5.0 V [p-p] (high impedance)
D-sub 9pin for external control
VIDEO IN 1
VIDEO IN 2
COMPONENT IN 1-2
HDMI 1-4
PC
RS232C (Serial)
LAN
(for VIERA CAST IPTV)
Card slot
AUDIO OUT
DIGITAL AUDIO OUT
FEATURES
TENTATIVE
C: 0.286 V [p-p] (75 Ω)
•
RJ45 (10BASE-T/100BASE-TX)
SD CARD slot × 1
AUDIO L-R:
RCA PIN Type × 2 0.5 V [rms]
PCM / Dolby Digital, Fiber Optic
3D Y/C FILTER CLOSED CAPTION
V-Chip
IPTV (VIERA CAST)
Photo viewer
Movie player
HDAVI Control 4
Including pedestal
48.9 ” × 32.3 ” × 15.8 ”
(1,241 mm × 818 mm × 401 mm)
TV Set only
48.9 ” × 30.5 ” × 3.3”
(1,241 mm × 774 mm × 83.5 mm)
xx.x lb. (xx.x
xx.x lb. (xx.x
[TC-P54Z1]
32.3 ” (818 mm)
48.9 ” (1,241 mm)
3.3 ” (83.5 mm)
TENTATIVE
20.1 ”
(510 mm)
FAQs, etc.
Including pedestal
TV Set only
Specifications
Care and Cleaning
Cleaning
Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to
which a small amount of mild liquid dish soap has been added and then wipe with a dry cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface
coating. (If using a chemically-treated cloth, follow the instructions supplied with the cloth.)
Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term
contact with rubber, vinyl products, or the like. (Doing so will cause deterioration.)
20 W [ 10 W + 10 W ] ( 10 % THD )
Channel Capability
(Digital/Analog)
Dimensions
( W × H × D ) Mass
Pedestal
Audio Output
VGA, SVGA, XGA, WXGA, SXGA
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the cloth dry.
Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.
Do not allow any mild liquid dish soap to come into direct contact with the surface of the Plasma TV.
If water droplets get inside the unit, operating problems may result.
Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet surface
may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made
from rubber or PVC.
(No. of pixels)
PC signals
Connection Terminals
First, unplug the Power cord plug from the wall outlet.
xxx W
Technical Information
Care and Cleaning
Maximum
Sound
Pin Layout for PC Input Terminal
Signal Name
NC (not connected)
GND (Ground)
AC 120 V, 60 Hz
30.5 ” (774 mm)
Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency
of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
Some PC models cannot be connected to the set.
There is no need to use an adapter for computers with IBM PC/AT compatible D-sub 15P terminal.
The maximum resolution: 1,280 × 1,024
If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity.
Signal Names for D-sub 15P Connector
Power Source
Power
Plasma
Consumption Display panel
PC Input Terminals Connection
11 12 13 14 15
Specifications
15.8 ” (401 mm)
Note
68
Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
69

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2009:02:06 15:03:49+09:00
Create Date                     : 2009:01:30 16:26:28+09:00
Metadata Date                   : 2009:02:06 15:03:49+09:00
Creator Tool                    : Adobe InDesign CS2_J (4.0.5)
Format                          : application/pdf
Title                           : tc_p54z1_eng_2488.indb
Creator                         : win12
Document ID                     : uuid:755fa586-924d-4abc-bd60-5c6b7941958a
Instance ID                     : uuid:773b8dab-1505-483e-974e-de135f962bce
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Has XFA                         : No
Page Count                      : 6
Author                          : win12

EXIF Metadata provided by EXIF.tools