Panasonic of North America OMNI100 Industrial Tag User Manual Omni ID ProVIEW Starter Kit

Omni-ID USA Inc. Industrial Tag Omni ID ProVIEW Starter Kit

Manual

User Guide for Omni-ID® Power 100 and 115 Industrial Tags Omni-ID office locations: US | UK | China | India | Southeast Asia | Germany
Power 100/115 User Guide -1- CONTENTS 1. Introduction ........................................................................................................................................................................ 2 About this Document .............................................................................................................................................................. 2 Related Products ..................................................................................................................................................................... 2 Certifications ........................................................................................................................................................................... 2 Regulatory Approvals .............................................................................................................................................................. 3 Federal Communications Commision Interference Statement .......................................................................................... 3 Industry Canada Statement ................................................................................................................................................ 3 2. Specifications ...................................................................................................................................................................... 4 Product Specifications ......................................................................................................................................................... 4 Environmental Specifications .............................................................................................................................................. 4 Physical Specifications ........................................................................................................................................................ 5 3. Customer Support ............................................................................................................................................................... 6
Power 100/115 User Guide -2- 1. INTRODUCTION ABOUT THIS DOCUMENT This Guide describes characteristics of the Omni-ID® Power 100 and Power 115 Personnel Tags. For instructions on using these tags with one of Omni-ID’s various software offerings, please refer to the documentation provided with the specific application. RELATED PRODUCTS OMNI-V3 Omni-ID View 3 visual display tag OMNI-V4 Omni-ID View 4 visual display tag OMNI-P400 OMNI-P415 Power 400 rugged active asset tag OMNI-P60 OMNI-P65 Power 60 personnel active tag OMNI-NGW Link Network Gateway (Ethernet) OMNI-MGW Link Mobile Gateway (USB/Bluetooth) OMNI-IANT Isotropic Antenna – omni-directional, horizontally polarized CERTIFICATIONS FCC Part 15.231 RSS-210 ETSI EN 300 220 V2.4.1 ETSI EN 301 489 – Part 1 (V1.9.2) ETSI EN 301 489 – Part 3 (V1.6.1)
Power 100/115 User Guide -3- REGULATORY APPROVALS FEDERAL COMMUNICATIONS COMMISION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. INDUSTRY CANADA STATEMENT This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Power 100/115 User Guide -4- 2. SPECIFICATIONS PRODUCT SPECIFICATIONS Battery Lithium coin cell (CR2450) Battery Life > 4 years Read Range > 150 m typical Data Communication 433 MHz Active Radio Protocol Power 100 - Omni-ID Proprietary Power 115 - IEEE 802.15.4 Configuration EPC Gen 2 interface with data bridge functions Beacon rate 3 – 60 sec (configurable) ENVIRONMENTAL SPECIFICATIONS Storage Temperature 20° C to +60° C Operating Temperature 0° C to +40° C IP Rating IP65 Ruggedness 4’ drop to concrete Shock: 20 G’s/9ms Vibration: Sinusoidal 3G 50-500 Hz Random 4G 50-500 Hz Warranty 1 year
Power 100/115 User Guide -5- PHYSICAL SPECIFICATIONS Size (mm) 58 x 35 x 14 Size (in) 2.24 x 1.38 x 0.55 Weight (g) 29 Construction ABS/Polycarbonate blend Attachment Vertical or horizontal mounting via screws, clip or adhesive
Power 100/115 User Guide -6- 3. CUSTOMER SUPPORT Information about Omni-ID’s complete line of RFID products can be found on our website: www.omni-id.com. Additional support is available by phone: +1 (585) 713-1000 or email: support@omni-id.com. The contents of this document are subject to change without notice. OMNI-ID, Inc. reserves the right to make changes, without notice, in the products, including circuits and/or software, described or contained therein. Information contained in this document regarding device applications and the like is intended through suggestion only and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications.

Navigation menu