Panasonic of North America SA-PMX9 CD Stereo System User Manual

Panasonic Corporation of North America CD Stereo System

User Manual

VQT5J68until 2014/4/3PPThank you for purchasing this product.Please read these instructions carefully before using this product, and save this manual for future use.If you have any questions, visit:U.S.A. and Puerto Rico: www.panasonic.com/supportCanada: www.panasonic.ca/english/supportRegister online at www.panasonic.com/register (U.S. customers only)Owner’s ManualCD Stereo SystemModel No. SC-PMX9Table of contentsIMPORTANT SAFETY INSTRUCTIONS................................................2Supplied accessories ...........................................................................3Maintenance ..........................................................................................3Preparing the remote control...............................................................3Making the connections.......................................................................4Placement of speakers.........................................................................4Overview of controls ............................................................................5Inserting media .....................................................................................5Media information.................................................................................6Network settings...................................................................................6Using AirPlay with this system’s speakers ......................................10Playing back music files on the DLNA server..................................11Bluetooth® operations ........................................................................11About Bluetooth®................................................................................12Media Playback operations................................................................12Radio ....................................................................................................13Clock and timers .................................................................................14Sound effects ......................................................................................14Using the auxiliary input ....................................................................14Others ..................................................................................................15Troubleshooting..................................................................................16Specifications......................................................................................18Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO).............19Limited Warranty (ONLY FOR CANADA)...........................................20SC-PMX9PP-VQT5J68_mst.book 1 ページ ２０１４年２月２５日　火曜日　午後１２時４分SC-PMX9無線認証_mst_0225.pdf
VQT5J682ENGLISHDo the procedures with the remote control. You can also use the buttons on the main unit if they are the same.Your system and the illustrations can look differently.These owner’s Manual are applicable to the following system.IMPORTANT SAFETY INSTRUCTIONSRead these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.1 Read these instructions.2 Keep these instructions.3 Heed all warnings.4 Follow all instructions.5 Do not use this apparatus near water.6 Clean only with dry cloth.7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11 Only use attachments/accessories specified by the manufacturer.12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13 Unplug this apparatus during lightning storms or when unused for long periods of time.14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.Unit• To reduce the risk of fire, electric shock or product damage,- Do not expose this unit to rain, moisture, dripping or splashing.- Do not place objects filled with liquids, such as vases, on this unit.- Use only the recommended accessories.- Do not remove covers.- Do not repair this unit by yourself. Refer servicing to qualified service personnel.Unit• To reduce the risk of fire, electric shock or product damage,- Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.- Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.- Do not place sources of naked flames, such as lighted candles, on this unit.• This unit is intended for use in moderate climates.• The power plug is the disconnecting device.Install this unit so that the power plug can be unplugged from the socket outlet immediately.• This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.• This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.Battery• Do not break open or short-circuit the battery.• Do not charge the alkaline or manganese battery.• Do not use the battery if the cover has peeled off.• Do not heat or expose to flame.• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.• Remove the battery if you do not use the remote control for a long period of time. Keep in a cool, dark area.• Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.• When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.-If you see this symbol-System SC-PMX9PPMain unit SA-PMX9PPSpeakers SB-PMX9WARNING!CAUTION!Information on Disposal in other Countries outside the European UnionThis symbol is only valid in the European Union.If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.CAUTIONCAUTION :TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE SCREWS.NO USER-SERVICEABLE PARTSINSIDE.REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.RISK OF ELECTRIC SHOCKDO NOT OPENSC-PMX9PP-VQT5J68_mst.book 2 ページ ２０１４年２月２５日　火曜日　午後１２時４分
3ENGLISHVQT5J680Supplied accessoriesCheck and identify the supplied accessories.Maintenance• To clean the main unit, wipe with a soft, dry cloth.• To clean the speakers, wipe with a fine-textured and dry cloth such as a microfibre cleaning cloth.• Never use alcohol, paint thinner or benzine to clean this system.• Before using chemically treated cloth, read the instructions that came with the cloth carefully.Preparing the remote control• Use alkaline or manganese battery.• Install the battery so that the poles (+ and –) align with those in the remote control.• Point the remote control at the remote control sensor, away from obstacles, at a maximum range of 7 m (23 ft) directly in front of the main unit, within an angle of approximately 30° to the left and right.THE FOLLOWING APPLIES IN THE U.S.A. AND CANADAThis transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm (7 7/8q) or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).THE FOLLOWING APPLIES ONLY IN CANADAThis device complies with RSS-210 of the IC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference,(2) This device must accept any interference received, including interference that may cause undesired operation of this device.THE FOLLOWING APPLIES ONLY IN CANADACAN ICES-3(B)/NMB-3(B)THE FOLLOWING APPLIES ONLY IN CANADAThe device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:≥Reorient or relocate the receiving antenna.≥Increase the separation between the equipment and receiver.≥Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.≥Consult the dealer or an experienced radio/TV technician for help.Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Responsible Party:Panasonic Corporation of North AmericaTwo Riverfront Plaza, Newark, NJ 07102-5490Support Contact: http://www.panasonic.com/contactinfoCaution!Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.1 x AC power supply cord(K2CB2CB00022)1 x Remote control(N2QAYB000896)1 x FM indoor antenna(RSAX0002)1 x Remote control battery2 x Speaker cables(REE1840)R6/LR6, AASC-PMX9PP-VQT5J68_mst.book 3 ページ ２０１４年２月２５日　火曜日　午後１２時４分
VQT5J684ENGLISHMaking the connectionsConnect the AC power supply cord only after all the other connections have been made.1Connect the FM indoor antenna.Place the antenna where reception is best.•Use an FM outdoor antenna if radio reception is poor.2Connect the speakers.Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.• Connect the cable with a red line to the red terminal (r).3Connect the AC power supply cord.Do not use an AC power supply cord with other equipment.Conserving powerThe system consumes approximately 0.4 W when it is in standby mode. Disconnect the power supply if you do not use the system.Some settings will be lost after you disconnect the system. You have to set them again.You can connect a VCR, DVD player etc. Note:• Disconnect the AC power supply cord before connection.• Switch off all equipment and read the appropriate operating instructions.• Components and cables are sold separately.• If you want to connect equipment other than those described, refer to the audio dealer.• Sound distortion can occur when you use an adaptor.• For information on the connection of a LAN cable, refer to page 6.Placement of speakersPlace the speakers so that the tweeter is on the inner side. To prevent damage to the speakers, do not touch the speaker cones if you remove the nets.Use only the supplied speakers.The combination of the main unit and speakers give the best sound. You can cause damage to the system and decrease the sound quality if you use other speakers.Note:• Keep your speakers more than 10 mm (13/32 q) from the main unit for ventilation.• Put the speakers on a flat safe surface.• These speakers do not have magnetic shielding. Do not put them near TVs, PCs or other equipment easily influenced by magnetism.• When you play at high levels for a long period, it can cause damage to the system and decrease the life of the system.• Decrease the volume in these conditions to prevent damage:- When you play distorted sound.- When you adjust the sound quality.221133To household AC outletTape (not supplied)BlackRedBlack RedCable with a red lineConnecting other equipmentDVD player (not supplied)Rear panel of this main unitAudio cable (not supplied)CAUTION!• Use the speakers only with the recommended system. If not, you can cause damage to the amplifier and speakers and can cause a fire.Consult an approved service personnel if damage occurs or if there is a sudden apparent change in performance.• Do the procedures included in these instructions when you attach the speakers.TweeterSC-PMX9PP-VQT5J68_mst.book 4 ページ ２０１４年２月２５日　火曜日　午後１２時４分
5ENGLISHVQT5J68Overview of controls 1 Standby/on switch [Í], [Í/I]Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.2Numeric buttons [1 to 9, 0, S10]To select a 2-digit numberExample: 16: [S10] > [1] > [6]3Delete a programed track4 Select audio source5Basic playback control6Select the sound effects7View the iPod menu8View content information9Clock and timer operation10 Set the program function11 Adjust the volume of the system12 Mute the sound of the systemPress the button again to cancel.“MUTE” is also canceled when you adjust the volume or when you switch off the system.13 Set the play menu item14 Set the radio menu item15 Select the option16 Enter setup menu17 “iPod_Dock” for iPod/iPhone18 Headphones jack ( )• Plug type: Ø 3.5 mm (1/8q) stereo (not supplied)• Avoid listening for prolonged periods of time to prevent hearing damage.• Excessive sound pressure from earphones and headphones can cause hearing loss.• Listening at full volume for long periods may damage the user’s ears.19 Display panel20 “iPod_Port” for iPod/iPhone/iPad and USB devices21 Open or close the disc tray22 Disc tray23 Remote control sensorInserting media17182122236115OPEN/CLOSED.BASSVOLUMESELECTORCDiPodBASS TREBLEiPad192064112345678910111213141516SETUPSELECTORTop view[iPod]: “iPod_Dock” ,. “iPod_Port” / “USB”[CD]: “CD”[SELECTOR]: “CD” --. “BLUETOOTH” --. “FM” --.“AUX” ^- “iPod_Port” / “USB” ( “iPod_Dock” (biPadOPEN/CLOSEiPod/iPhone(not supplied)Lightning connectorSelect “iPod_Dock” as the sourceOpen the cover and connect an iPod/iPhone with Lightning connector.Select “iPod_Port” as the source“USB” is displayed when a compatible USB device is inserted.• Do not connect the following models:iPod classic, iPod [4th (color display), and 5th (video) generation], iPod nano (1st generation)Unexpected behaviour may occur.Select “CD” as the sourceSC-PMX9PP-VQT5J68_mst.book 5 ページ ２０１４年２月２５日　火曜日　午後１２時４分
VQT5J686ENGLISH“iPod_Dock” (Using Lightning connector):• Make sure that the iPod/iPhone is fully inserted and its back is resting against the cushion pad.• Make sure to remove the iPod/iPhone from its case.• Make sure to align your iPod/iPhone with the connector when inserting.“iPod_Port”:• Use the dedicated USB cable (not supplied) for iPod/iPhone/iPad.• Insert the USB device directly. Do not use any USB extension cable.• Before removing the USB device, select a source other than “USB”.Disc tray:• Remove the CD only after it stops rotating.Charging starts when an iPod/iPhone/iPad is connected to this system.• During standby mode, charging will not start from the “iPod_Port” connection, however it will start as usual from the “iPod_Dock” connection.- To charge from the “iPod_Port” connection, start the charging before turning this unit to standby mode.• See the iPod/iPhone/iPad display for its battery charging status.• Disconnect the iPod/iPhone/iPad if it is not used for an extended period of time after charging is complete.• Charging stops when the battery is fully charged. The battery will deplete naturally.Media information• Please be aware that Panasonic accepts no responsibility for the loss of data and/or information.Compatible with “iPod_Dock” connection(Using Lightning connector)Compatible with “iPod_Port” connection[Using dedicated USB cable (not supplied)](as of January 2013)Note:• Compatibility depends on the software version. Update your iPod/iPhone/iPad to the latest software before using it with this unit.• Read the User Guide of the iPod/iPhone/iPad for the operating instructions.• USB devices that support bulk-only transfer.Note:• Files are defined as tracks and folders are defined as albums.• Track must have the extension “.mp3”, “.MP3”, “.flac” or “.FLAC”.• This system can access up to:- 255 albums (including root folder)- 2500 tracks- 999 tracks in one album• CBI (Control/Bulk/Interrupt) is not supported.• Some files can fail to work because of the sector size.• NTFS file system is not supported (only FAT16/FAT32 file system is supported).• This system can play CD-R/RW with CD-DA or MP3 format content.• Disc must conform to ISO9660 level 1 or 2 (except for extended formats).Note:• Some CD-R/RW cannot be played because of the condition of the recording.• MP3 files are defined as tracks and folders are defined as albums.• This system can access up to:- CD-DA: 99 tracks- MP3: 999 tracks, 255 albums (including root folder) and 20 sessions• Recordings will not necessarily be played in the order you recorded them.Network settingsYou can stream music from an iOS device (iPhone, iPod, iPad), an Android™ device or a Mac/PC to this system’s speakers by using the AirPlay or DLNA feature.To use these features, this system must join the same network as the AirPlay compatible device (>10) or the DLNA compatible device.• It is also possible to use AirPlay without a network router. (>10, “Directly streaming to this system (AirPlay)”)• Switching between a wired LAN connection and a wireless LAN connection may cause the connection settings to be initialized. In that case, make the settings again.• For a stable connection to the network, a wired LAN connection is recommended.Normally, just connecting a LAN cable will complete the setup.1Connect the main unit to a broadband router, etc. using LAN cable while the AC power supply cord is disconnected.2Connect the AC power supply cord to the main unit and turn this system on.This unit is ready for use when “ ” is indicated on the display.Charging an iPod/iPhone/iPadCompatible iPod/iPhone/iPad iPhone 5iPod touch (5th generation)iPod nano (7th generation)iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS / iPhone 3G / iPhoneiPad (3rd, and 4th generation) / iPad 2 / iPad / iPad miniiPod touch1st, 2nd, 3rd, 4th, and 5th generationiPod nano2nd, 3rd, 4th, 5th, 6th, and 7th generationCompatible USB devicesCompatible CDWired LAN connectionLAN Cable (not supplied)Broadband router, etc.e.g.,SC-PMX9PP-VQT5J68_mst.book 6 ページ ２０１４年２月２５日　火曜日　午後１２時４分
7ENGLISHVQT5J68• The LAN cable must be connected or disconnected while the AC power supply cord is disconnected.• Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.• Inserting any cable other than a LAN cable in the LAN port can damage the unit.• When a LAN cable is connected, wireless settings will be canceled.This system has built-in Wi-Fi® and can be connected to a wireless router.Preparation• Place this system as close to the wireless network router as possible.• Disconnect the LAN cable.• Point the antenna on the rear of the main unit up as shown in the figure.• Do not perform the following: - Tilting the antenna forward or backwards when it is pointing up- Applying too much force to the antenna- Carrying this unit by holding the antenna1Turn this system on.2Follow the chart below to choose the network setting method.• If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced setting, try “Method 4” on page 9.• To cancel this setting in the middle, press [Í] to turn off this system.• Simultaneous use with other 2.4 GHz devices, such as microwaves, cordless telephones, etc., may result in connection interruptions.• For up to date compatibility information on your wireless network router refer to http://panasonic.jp/support/global/cs/(This site is in English only.)∫Using the WPS Push Button Configuration (PBC)1Press [SETUP] on the remote control repeatedly to select “Net Setup” and then press [OK]. *1“With iPod” is indicated on the display.2Press [SETUP] on the remote control repeatedly to select “WPS Push” and then press [OK]. *1“WPS” flashes on the display.• Complete step 3 within 2 mins.3After “WPS” is indicated, press the WPS button on the wireless network router.4The settings are completed when “Success” is displayed.“ ” is indicated on the display.5Press [OK] on the remote control to exit the setting.(Continued on the next page)You can perform network-related settings individually.jIf your home wireless network has been configured to use specific IP Addresses, Subnet Mask, Default Gateway, Primary DNS, etc.jIf you want to change the name of this system that is displayed as the AirPlay speakers or DLNA renderer.1 Connect the main unit directly to your computer using LAN cable while the AC power supply cord is disconnected.2 Connect the AC power supply cord to the main unit and turn this system on.3After “ ” is indicated on the display, check the IP address for this unit. (>15, “IP/MAC Address”)4 Press [SETUP] on the remote control repeatedly to select “Net Setup” and then press [OK].5 Press [SETUP] on the remote control repeatedly to select “Manual” and then press [OK].6 When “Setting” blinks on the display, start an Internet browser on your computer and then type the IP address for this unit checked in step 3 into the address field and display the setup screen.• It may take a few minutes until the setup screen is available to be displayed on the browser depending on the environment.In that case, reload the browser.• If you have reloaded the browser repeatedly for 10 minutes and the setup screen is still not displayed, perform a memory reset to restore the factory presets (>17) and redo the setup from the beginning.7 Select and input the details.8 Select “JOIN” to apply the settings.9 The settings are completed when “Success” is displayed.10 Turn off this unit and then disconnect the AC power supply cord.11 Perform “Wired LAN connection”. (>6)Wireless LAN connectionDoes your wireless network router support WPS?Yeslright,“Method 1”l8,“Method 2”l8,“Method 3”No / Do not knowYes NoAre you using aniPod touch/iPhone/iPad?Is the iOS version 5.0 or later?Method 1If your wireless network router supports WPS (Wi-Fi Protected SetupTM).The WPS identifier markWPS Push Button Configuration (PBC) compatible wireless network router may have this mark.“Fail” may be displayed if the connection was not made within the set time limit. Try the setting again. If “Fail” is still displayed, try other methods on page 8 or 9.SC-PMX9PP-VQT5J68_mst.book 7 ページ ２０１４年２月２５日　火曜日　午後１２時４分
VQT5J688ENGLISH• This system can also be set using the WPS PIN code.(Before starting, refer to the wireless network router’s operating instructions for details on how to enter the PIN code.)1 Press [SETUP] on the remote control repeatedly to select “Net Setup” and then press [OK]. *22 Press [SETUP] on the remote control repeatedly to select “WPS PIN” and then press [OK]. *23 Enter the PIN code into the wireless network router.*1 Replace with the following step.Press and hold [D.BASS] on the main unit for 2 seconds while pressing and holding [∫] on the main unit.*2 Replace with the following steps.1 Press and hold [D.BASS] on the main unit for 2 seconds while pressing and holding [∫] on the main unit.2 When “WPS” is indicated, press and hold [D.BASS] on the main unit for 2 seconds while pressing and holding [∫] on the main unit again.With this method you will share the wireless network settings of your iPod touch/iPhone/iPad with this system.• The following explanations are based on an iPhone.1Disconnect iPod/iPhone/iPad connected to the main unit.2Connect the iPhone to your home wireless network.3Connect the iPhone to the main unit.4Press [SETUP] on the remote control repeatedly to select “Net Setup” and then press [OK].“With iPod” is indicated on the display.5Unlock your iPhone and then press [OK] on the remote control.“Connecting Wi-Fi” is indicated on the display.• If “Not Supported” or “Set Wi-Fi” is displayed, check that the iPhone is connected to the wireless network and try again from step 1.6A message will pop-up on your iPhone.Allow the iPhone to share the wireless network settings.*17The settings are completed when “Success” is displayed.“ ” is indicated on the display.8Press [OK] on the remote control to exit the settings.*1: Depending on the network environment or the wireless network router settings, it may take more than 10 mins. to complete the settings.You can make the wireless network settings with the app, “Panasonic Stereo System Network Setup” (for free).If you’re using an Android device, download the app at Google Play™. If you’re using an iPod touch/iPhone/iPad, download it at the App Store.Preparation• Connect your smartphone to your home wireless network.• Check the password for your home wireless network.1Press [SETUP] on the remote control repeatedly to select “Net Setup” and then press [OK].“With iPod” is indicated on the display.2Press [SETUP] on the remote control repeatedly to select “Manual” and then press [OK].“Setting” blinks on the display.3Start “Panasonic Stereo System Network Setup” on your smartphone and follow the indications.∫Note for the iOS versionAfter step 31Enter the password for the home wireless network to which the iOS device is connected.2When a message instructing you to connect the iOS device to this system is displayed, press the home button.3On the Wi-Fi network selection screen in “Settings”, select “00 Setup _ _ _ _ _ _”.• “ _ ” stands for a digit that is unique to each set.4When a message indicating the completion of the connection to this system is displayed, restart the app.5When a message indicating the completion of the Wi-Fi setup of this system is displayed, close the app, and then check the operation of AirPlay, etc.• “Panasonic Stereo System Network Setup” for Mac OS is also available at the Mac App Store.Method 2If you're using an iPod touch/iPhone/iPad.(iOS version 5.0 or later.)If “Fail” is displayed press [OK] and try the setting again. If “Fail” is still displayed, try other methods on page 7 to 9.• If the iPhone was disconnected midway through, try again without disconnecting it.Method 3Setting the network connection with the smartphone app.SC-PMX9PP-VQT5J68_mst.book 8 ページ ２０１４年２月２５日　火曜日　午後１２時４分
9ENGLISHVQT5J68With this method, you will access this system’s wireless network settings from the Internet browser of your compatible device.• The following explanations are based on an iPhone.1Press [SETUP] on the remote control repeatedly to select “Net Setup” and then press [OK].“With iPod” is indicated on the display.2Press [SETUP] on the remote control repeatedly to select “Manual” and then press [OK].“Setting” blinks on the display.3After “Setting” blinks, connect your compatible device to this system’s wireless network named “00 Setup _ _ _ _ _ _”.• “ _ ” stands for a digit that is unique to each set.• Make sure that DHCP is enabled for the network setting on your compatible device.4Start the Internet browser on your compatible device and type “http://192.168.1.12/” into the URL address field and display the page.This system’s setup window is displayed.≥Examples of Internet browsersiOS device/Mac : SafariAndroid device : Google Chrome™PC : Windows Internet Explorer5Select “Search wireless network”.6Select and input the details.• Check your home wireless network name (Network name (SSID)) and password for this network. This can often be found on the wireless network router itself.7Select “JOIN” to apply the settings.• In the pop-up screen, select “OK” to continue.• Select “Cancel” to return to the setup window.8The settings are completed when “Success” is displayed.“ ” is indicated on the display.9Make sure to connect your compatible device back to your home wireless network.*1: If you have set your wireless network to be invisible, select “BACK” and refer to “Alternative settings”. (>right)• The below settings are the alternative or additional settings for “Method 4”. (>left)• Enable Java and Cookies in your browser settings.Method 4Setting the network connection from an Internet browser.[1] Select your home wireless network name.*1[2] Type the password.If “Fail” is displayed press [OK], check the wireless network password and other settings and start again from step 1.Advanced network settingsAlternative settingsInstead of steps 5 and 6Select “Manual settings”.1Type your home wireless network name into the “Network name (SSID)” field.2Select the encryption method from the “Security system” drop down list.3Type the password into the “Password” field and then select “JOIN”.Additional settingsIf your home wireless network has been configured to use specific IP Addresses, Subnet Mask, Default Gateway, Primary DNS, etc.Before step 7Select “Advanced network settings”.{.Input the required addresses into each field and select “JOIN”.• To change the settings back to DHCP, select “ON” from the “DHCP” drop down list.If you want to change the name of this system that is displayed as the AirPlay speakers or DLNA renderer.Before step 5Select “Additional settings”.1Select “Edit STEREO SYSTEM name”.2Type a new name into the “STEREO SYSTEM name” field.{. Only ASCII characters can be used.3Select “OK”.4If this system is already connected to your home wireless network:– Select “Additional settings”, and then select “Exit”.If this system is not connected to your home wireless network:jContinue to step 5 of “Method 4”.SC-PMX9PP-VQT5J68_mst.book 9 ページ ２０１４年２月２５日　火曜日　午後１２時４分
VQT5J6810ENGLISHUsing AirPlay with this system’s speakersPreparation• Complete the network settings. (>6)• Connect the iOS device or Mac/PC to the same home network as this system.1Turn this system on.• Check that “ ” is indicated on the display.• If it doesn’t be indicated, check the network settings. (>6)2iOS device: Start the “Music” (or iPod) app.Mac/PC: Start “iTunes”.• If the Music app on your iOS device is used, select the audio file you want to play.3Select “Panasonic PMX9 _ _ _ _ _ _”*1, 2 from the AirPlay icon.{. Check the volume settings before starting the playback. (When AirPlay is used for the first time, the volume may be output at the maximum setting.)4Start play.• The playback will start with a slight delay.• This system can be set to turn on automatically when this system is selected as the output speakers. (>15, “Network standby”)• Playback of other audio sources will stop and AirPlay output will have priority.• Volume changes on the iOS device or iTunes will be applied to this system. (Refer to the iTunes Help for the required settings in iTunes.)• With some iOS and iTunes versions, it may not be possible to restart the AirPlay playback if the selector is changed (e.g., “CD”) or this system is turned off, during the AirPlay playback.In this case, select a different device from the AirPlay icon of the Music App or iTunes and then re-select this system as the output speakers.• AirPlay will not work when playing back videos on iTunes.*1: “ _ ” stands for a digit that is unique to each set.*2: The name that is displayed for this system can be changed from the “Edit STEREO SYSTEM name” settings. (>9, “Advanced network settings”)(as of January 2013)With this function set to “On”, you can stream music from the iOS device or Mac / PC (iTunes 10.2.2 or later) to this system without the need of a network router.• Previous network settings will be deleted when this function is set to “On”.• The following explanations are based on an iPhone.1Press [SETUP] repeatedly to select “D.Connect”.2Press [2,1] to select “On” and then press [OK].3Press [2,1] to select “OK? Yes” and then press [OK].4Connect your iPhone to this system’s wireless network named “PMX9 _ _ _ _ _ _”*2.5Enter the password that is indicated on this system’s display.6Once the iPhone is connected to this system’s wireless network, the setup is competed.7Continue to step 2 of “Using AirPlay with this system’s speakers”. (>left)• This setting is reset to “Off” when other network settings are performed. (>6)• When “D.Connect” is set to “On”, this system will not be connected to the Internet. It is not possible to update the software or check the Wi-Fi signal strength.• When AirPlay is not being used, disconnect the AirPlay compatible device from this network.• When using a computer on this network, make sure that all the shared files are encrypted.• This feature is only compatible with the “Open System” authentication method. It is not compatible with “Shared Key” authentication method.*1: “ _ ” stands for a digit.*2: “ _ ” stands for a digit that is unique to each set.PMX9e.g., “Music” app.iPhone iOS 6.0.1PMX9e.g., iTunes 11.0Compatible AirPlay devicesiOS 4.3.3 or lateriPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GSiPad (3rd, and 4th generation) / iPad 2 / iPad /iPad miniiPod touch3rd, 4th, and 5th generationiTunes 10.2.2 or later (Mac / PC)Directly streaming to this system (AirPlay)“PW _ _ _ _ _”*1 is displayed.The 5 digits after “PW” is the password for this network.PMX9SC-PMX9PP-VQT5J68_mst.book 10 ページ ２０１４年２月２５日　火曜日　午後１２時４分
11ENGLISHVQT5J68The first time “D.Connect” is set to “On”, a password for this system’s network is randomly created and memorized in this system.• This password is memorized until it is changed.1While “D.Connect” is set to “On”:Press [SETUP] repeatedly to select “D.Connect”.2Press [2,1] to select “On” and then press [OK].3The current password is displayed.• The 5 digits after “PW” is the password for this network.4Press any button to exit.1While “D.Connect” is set to “Off”:Press [SETUP] repeatedly to select “D.Connect”.2Press [2,1] to select “Change PW” and then press [OK].3Press [2,1] to select “OK? Yes” and then press [OK].4The new password is displayed.• The 5 digits after “PW” is the new password for this network.5Press any button to exit.∫Note about changing the passwordAfter changing this system’s network password, if you are not prompted to change the password on the other devices, the following changes are required.iOS device (iPod touch/iPhone/iPad)*1:• Before choosing this system’s network,1Select [ ] located beside this system’s wireless network name.2Select “Forget this Network” and then select “Forget”.3Select this system’s wireless network and enter the new password.Mac/PC:• If the computer has memorized the old password, be sure to change the memorized password for this system’s network to the new one.• Refer to the devices’s operating instructions for details.*1:Steps are based on iOS 6.0.1.Playing back music files on the DLNA serverYou can share music files stored in the DLNA Certified media server (PC with Windows 7 installed, smartphone, etc.) connected to your home network, and enjoy the contents with this system’s speaker.Preparation• Complete the network settings. (>6)• Connect your device with DMC (Digital Media Controller) compatible software installed to the same home network as this system.• Add the contents and folder to the libraries of the Windows Media® Player or the smartphone, etc.– Playlist of Windows Media® Player can play back only the contents that are stored in the libraries.1Turn this system on.• Check that “ ” is indicated on the display.• If it doesn’t be indicated, check the network settings. (>6)2Operate the DMC compatible device and connect to this system.• The device name of this system will be displayed as “Panasonic PMX9 _ _ _ _ _ _”*1, 2.• For details on how to use DMC compatible devices, refer to the operating instructions of the devices or the software.∫Support format of DLNA clientFile formats that are not supported by your DLNA server cannot be played.• Depending on the contents and the connected equipment, playback may not be possible.*1: “ _ ” stands for a digit that is unique to each set.*2: The name that is displayed for this system can be changed from the “Edit STEREO SYSTEM name” settings. (>9, “Advanced network settings”)Bluetooth® operationsBy using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this system wirelessly.Refer to the operating instructions of the Bluetooth® device for details.Preparation• Turn on the Bluetooth® feature of the device and place the device near this system.• If this system is already connected to a Bluetooth® device, disconnect it.1Press [SELECTOR] repeatedly to select “BLUETOOTH”.If “Pairing” is indicated on the display, go to step 3.2Press [PLAY MENU] to select “New Device” and then press [OK].“Pairing” is indicated on the display.3Select “SC-PMX9” from the Bluetooth® device’s Bluetooth® menu.4Start play on the Bluetooth® device.Note:• If prompted for the passkey, input “0000”.• You can register up to 8 devices with this system. If a 9th device is paired, the device that has not been used for the longest time will be replaced.Preparation• Turn on the Bluetooth® feature of the device and place the device near the speakers.• If this system is already connected to a Bluetooth® device, disconnect it.1Press [SELECTOR] repeatedly to select “BLUETOOTH”.“Ready” is indicated on the display.2Select “SC-PMX9” from the Bluetooth® device’s Bluetooth® menu.The name of the connected device is indicated on the display for 2 seconds.3Start play on the Bluetooth® device.Note:• This system can only be connected to one device at a time.• When “BLUETOOTH” is selected as the source, this system will automatically try and connect to the last connected Bluetooth® device.• The Bluetooth® device will be disconnected if a different audio source (e.g., “CD”) is selected.Display the passwordChange the passwordAudio codec Example of file extensionMP3 .mp3WAV .wavFLAC .flacPairing Bluetooth® devicesConnecting a paired Bluetooth® deviceSC-PMX9PP-VQT5J68_mst.book 11 ページ ２０１４年２月２５日　火曜日　午後１２時４分
VQT5J6812ENGLISHYou can change the transmission speed to prioritize transmission quality or sound quality.Preparation•Press [SELECTOR] repeatedly to select “BLUETOOTH”.• If a Bluetooth® device is already connected, disconnect it.1Press [PLAY MENU] repeatedly to select “Link Mode”.2Press [2,1] to select the mode and then press [OK].Mode 1: Emphasis on connectivityMode 2: Emphasis on sound qualityIf the sound input level of the Bluetooth® transmission is too low, change the input level setting.Preparation• Connect a Bluetooth® device.1Press [PLAY MENU] repeatedly to select “Input Level”.2Press [2,1] to select the level and then press [OK].“Level 0” ,. “Level i1” ,. “Level i2”^-----------------------------------------JNote:• Select “Level 0” if the sound is distorted.1While a Bluetooth® device is connected:Press [PLAY MENU] to select “Disconnect?”.2Press [2,1] to select “OK? Yes” and then press [OK].About Bluetooth®Frequency band used• This system uses the 2.4 GHz frequency band.Certification of this device• This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary.• The actions below are punishable by law in some countries:- Taking apart or modifying this system.- Removing specification indications.Restrictions of use• Wireless transmission and/or usage with all Bluetooth® equipped devices is not guaranteed.• All devices must conform to standards set by Bluetooth SIG, Inc.• Depending on the specifications and settings of a device, it can fail to connect or some operations can be different.• This system supports Bluetooth® security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution.• This system cannot transmit data to a Bluetooth® device.Range of use• Use this device at a maximum range of 10 m (33 ft).The range can decrease depending on the environment, obstacles or interference.Interference from other devices• This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this system is located too close to other Bluetooth® devices or the devices that use the 2.4 GHz band.• This system may not function properly if radio waves from a nearby broadcasting station, etc. is too strong.Intended usage• This system is for normal, general use only.• Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc).Media Playback operationsThe following marks indicate the availability of the feature.Preparation• Turn the unit on.• Insert the media or connect the Bluetooth® device.• Press [CD], [iPod] or [SELECTOR] to select the audio source.Note:• Depending on the model (e.g., iPod nano 7th generation, etc.), it may be necessary to select the album, artist, etc. on the iPod/iPhone.• Operation results may vary depending on the iPod/iPhone/iPad models.• Tracks can be selected by pressing the numeric buttons.Bluetooth® transmission mode• The default setting is “Mode 2”.• To enjoy a higher sound quality, select “Mode 2”.Bluetooth® input levelDisconnecting a Bluetooth® devicePanasonic bears no responsibility for data and/or information that is compromised during a wireless transmission.[CD]: CD audio in CD-DA format and a CD that contains MP3 files[iPod]: Compatible iPod/iPhone/iPad[USB]: USB devices containing MP3/FLAC files[AirPlay] : When connected to an AirPlay compatible device. (>10)[Bluetooth]:Connected Bluetooth® deviceBasic play [CD] [iPod] [USB] [AirPlay] [Bluetooth]Play Press [1/;].Stop Press [∫].•[USB]: A track being played back is memorized, and “Resume” is displayed. The playback position returns to the beginning of the track.•[USB]: Press [∫] two times to stop the playback fully.Pause Press [1/;].Press again to continue playback.Skip Press [:] or [9] to skip track.(main unit: [:/6] or [5/9])[CD] [USB]: Press [3] or [4] to skip the MP3/FLAC album.Search(Except [AirPlay])During play or pausePress and hold [6] or [5].(main unit: [:/6] or [5/9])•[iPod]: Backwards search is only within the current track.•[USB]: Sound is not output.[iPod]View iPod menuPress [iPod MENU].[iPod]Select an itemPress [3,4] and then press [OK].SC-PMX9PP-VQT5J68_mst.book 12 ページ ２０１４年２月２５日　火曜日　午後１２時４分
13ENGLISHVQT5J68Press [DISPLAY].Note:• Maximum characters that can be shown:approximately 32• This system supports ver. 2.3 ID3 tags.• Text data that the system does not support can show differently.1Press [PLAY MENU] to select “Repeat”, “Random” or “PLAYMODE”.2Press [2,1] and then press [OK] to select the desired mode.Note:• During random playback, you cannot skip to tracks which have been played or press the numeric buttons.• Playmode function does not work with “Program playback”.•[CD] : The setting returns to the default “Off” when you open the disc tray.[AirPlay] : The applied settings will remain until it is changed.*1: [AirPlay] : Perform the settings during playback.This function allows you to program up to 24 tracks.[CD] (CD-DA)1Press [PROGRAM] in the stop mode.“PGM” is shown.2Press the numeric buttons to select the desired track.Do this step again to program other tracks.3Press [1/;] to start playback.[CD] (MP3), [USB]1Press [PROGRAM] in the stop mode.“PGM” is shown.2Press [3,4] to select the desired album.3Press [9] and then press the numeric buttons to select the desired track.4Press [OK].Do steps 2 through 4 again to program other tracks.5Press [1/;] to start playback.Note:• The program memory is cleared when you open the disc tray.Radio30 FM stations can be preset.PreparationPress [SELECTOR] repeatedly to select “FM”.1Press [RADIO MENU] to select “Auto Preset”.2Press [2,1] to select “Lowest” or “Current” frequency.3Press [OK] to start presetting.To cancel, press [∫].1Press [6] or [5] to tune in to the station.To tune automatically, press and hold the button until the frequency starts changing quickly.2Press [PROGRAM].3Press the numeric buttons to select a preset number.Do steps 1 through 3 again to preset more stations.The new station replaces any station that occupies the same preset number.Press the numeric buttons, [:] or [9] (main unit: [:/6] or [5/9]) to select the preset station.1Press [RADIO MENU] repeatedly to select “FM Mode”.2Press [2,1] to select “Mono” and then press [OK].To cancel, select “Stereo”.“Mono” is also canceled when you change the frequency.To memorize the settingContinue with steps 2 and 3 of “Manual tuning and presetting”.Viewing available information [CD] [USB] [Bluetooth]eg. MP3 : Track : AlbumTAG: ID3 tagsPlay menu [CD] [USB] [AirPlay]*1[CD] [USB] RepeatOff Select to cancel repeat playback.1-Track Only plays the selected track.•“1TR, `” is displayed.(Skip to the desired track.)All All tracks are repeated.•“`” is displayed.[AirPlay] RepeatRefer to the connected device to verify the selected setting.[CD] [USB] RandomOn Plays the contents randomly.• “RND” is displayed.• “RND” will not be displayed when “1-Track” is selected.Off Random playback is turned off.[AirPlay] ShuffleRefer to the connected device to verify the selected setting.[CD] (MP3) [USB] PLAYMODEAll Play all MP3/FLAC tracks.1-Album Only plays the selected MP3/FLAC album.• “1ALBUM” is displayed.Program playback [CD] [USB]Cancel program modePress [PROGRAM] in the stop mode.Check program contentsPress [:] or [9] when “PGM” is shown in the stop mode.Clear the last trackPress [DEL] in the stop mode.Clear all programed tracksPress [∫] in the stop mode. “CLR All” is shown. Within 5 seconds, press [∫] again.Automatic presettingManual tuning and presettingSelecting a preset stationImproving the sound qualitySC-PMX9PP-VQT5J68_mst.book 13 ページ ２０１４年２月２５日　火曜日　午後１２時４分
VQT5J6814ENGLISHClock and timersThis is a 12-hour clock.1Press [CLOCK/TIMER] to select “CLOCK”.2Within 10 seconds, press [3,4] to set the time.3Press [OK].Press [CLOCK/TIMER] to show the clock for a few seconds.Note:• Reset the clock regularly to maintain accuracy.The sleep timer switches off the system after the set time.Press [SLEEP] repeatedly to select the setting (in minutes).To cancel, select “Off”.To show the remaining timePress [SLEEP].Note:• The sleep timer can be used together with the play timer.• The sleep timer always comes first. Be sure not to set an overlap of timers.You can set the timer to come on at a certain time to wake you up.PreparationSet the clock.1Press [CLOCK/TIMER] repeatedly to select “TIMER Adjust”.2Within 8 seconds, press [3,4] to set the start time.3Press [OK].4Do steps 2 and 3 again to set the end time.To start the timer1Prepare the audio source you want to listen to and set the volume.2Press [F, PLAY].“F” is shown.To cancel, press [F, PLAY] again.The system must be switched off for the timer to operate.To check the settingsPress [CLOCK/TIMER] repeatedly to select “TIMER Adjust”.Note:• The timer starts at a low volume and increases gradually to the preset level.• The timer comes on at the set time every day if the timer is on.• If you switch off the system and switch on again while a timer is in operation, the timer will not stop at the end time.Sound effects1Press [SOUND] to select a sound effect.2Press [2,1] to select the desired setting.By main unit onlyTurn [BASS] or [TREBLE] to adjust the level.Press [PRESET EQ] to select a setting.This function lets you enjoy a powerful bass effect.Press [D.BASS] to select “On D.BASS” or “Off D.BASS”.Using the auxiliary inputYou can connect a VCR, DVD player etc. and listen to the audio through this system.PreparationConnect the external equipment.1Press [SELECTOR] repeatedly to select “AUX”.2Play the external equipment.Setting the clockSleep timer30min > 60min > 90min > 120min > Off^-----------------------------------------------------------bPlay timerChanging the sound qualityBASS -4 to +4TREBLESurround “On Surround” or “Off Surround”Preset EQHeavy Adds punch to rockSoft For background musicClear Clarifies higher frequenciesVocal Adds gloss to vocalFlat Cancels the sound effectD.BASSSC-PMX9PP-VQT5J68_mst.book 14 ページ ２０１４年２月２５日　火曜日　午後１２時４分
15ENGLISHVQT5J68Others1Press [SETUP] to select “Dimmer”.2Press [2,1] to select “On” and then press [OK].Note:• To cancel, select “Off” in step 2.This function switches off the system (except in radio source) if you do not use the system for approximately 20 minutes.1Press [SETUP] repeatedly to select “Auto Off”.2Press [2,1] to select “On” and then press [OK].Note:• To cancel, select “Off” in step 2.• When connected to a Bluetooth® device, this function does not work.•If “Net Standby” is set to “On”, this function will also be set to “On”. To change the setting, set “Net Standby” to “Off”. (>15)Occasionally, Panasonic may release updated software for this system that may add or improve the way a feature operates. These updates are available free of charge.Preparation• Turn this system on.• Connect this system to the home network. (>6)– Make sure that the network is connected to the Internet.– If “D.Connect” is set to “On”, change the setting to “Off” and connect this system to a network that is connected to the Internet.1Press [SETUP] repeatedly to select “SW Update” and then press [OK].2Press [2,1] to select “Update? Yes” and then press [OK] to start the update.• Select “Update? No” to cancel the update.{. After the update has finished, “Success” is displayed.3Disconnect the AC power supply cord and reconnect it after 3 minutes.• If there are no updates, “No Need” is displayed.≥Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.∫Checking the software version1 Press [SETUP] repeatedly to select “SW Version” and then press [OK].{. The version of the installed software is displayed.2 Press [OK] to exit.To check the Wi-Fi signal strength where this system is located.PreparationConnect this system to the wireless network. (>6)1Press [SETUP] repeatedly to select “Signal Level” and then press [OK].• This system’s displays show “Level ”.(“  ” stands for a number.)2Press [OK] to exit this display mode.• It is recommended to have a signal strength of “3”. Change the position or angle of your wireless network router or this system if the indication is “2” or “1” and see if the connection improves.• If “Level 0” is displayed, this system cannot establish a link with the wireless network router. (>17)• This function does not work when “D.Connect” is set to “On”.The wireless LAN function can be enabled or disabled.1Press [SETUP] repeatedly to select “Wireless LAN” and then press [OK].2Press [2,1] to select “On” or “Off” and then press [OK].• The factory preset is “On”.This system can turn on automatically from standby mode when this system is selected as the AirPlay speakers.PreparationConnect this system to the home network. (>6)1Press [SETUP] repeatedly to select “Net Standby” and then press [OK].2Press [2,1] to select “On” and then press [OK].• To cancel this function, select “Off” in step 2.• The factory preset is “Off”. If this function is set to “On” the standby power consumption will increase.Display the name for the connected wireless network (SSID).1Press [SETUP] repeatedly to select “Net Info” and then press [OK].“IP Addr.” is indicated on the display.2Press [SETUP] repeatedly to select “SSID” and then press [OK].3Press [OK] to exit.• If “No Connect” is displayed this system is not connected to a wireless network.• All letters are displayed as capital letters, and characters that cannot be displayed are replaced with “¢”.To check this system’s IP address or the Wi-Fi MAC address.1Press [SETUP] repeatedly to select “Net Info” and then press [OK].“IP Addr.” is indicated on the display.2Press [SETUP] repeatedly to select “IP Addr.” or “MAC Addr.” and then press [OK].The IP address or the MAC address is partially displayed.3Press [2,1] on the remote control to show the rest of the IP address or the MAC address.• To exit the setting, wait 20 sec.• The “ – ” displayed on the top or bottom left of the display indicate the first and last units respectively.Decrease the brightness of the display panelAutomatically switch off the systemSoftware updateDO NOT DISCONNECT the AC power supply cord while one of the following messages is displayed.– “Linking”, “Updating” or “%” (“  ” stands for a number.)• During the update process, no other operations can be performed.Wi-Fi signal strengthWireless LAN settingNetwork standbyWireless network name (SSID)IP/MAC AddressSC-PMX9PP-VQT5J68_mst.book 15 ページ ２０１４年２月２５日　火曜日　午後１２時４分
VQT5J6816ENGLISHTroubleshootingBefore requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated do not solve the problem, consult your dealer for instructions.Do you have the latest software installed?• Occasionally, Panasonic may release updated software for this system that may add or improve the way a feature operates. (>15)No operations can be done with the remote control.• Examine that the battery is installed correctly.Sound is distorted or no sound.• Adjust the volume of the system.•Switch off the system, determine and correct the cause, then switch the system on again. It can be caused by straining of the speakers through excessive volume or power, and when using the system in a hot environment.A “humming” sound can be heard during playback.• An AC power supply cord or fluorescent light is near the cables. Keep other appliances and cords away from the cables of this system.Display not shown correctly.Playback does not start.• You have not put in the disc correctly. Put it in correctly.• Disc is dirty. Clean the disc.•Replace the disc if it is scratched, warped, or non-standard.•There is condensation. Let the system dry for 1 to 2 hours.Reception is poor or a beat sound is heard.• Keep the antenna away from computers, TVs, other cables and cords.• Use an outdoor antenna.• Switch off the TV or move it away from the system.Stations cannot be selected.• Change the FM frequency step.1Press [SELECTOR] to select “FM”.2Press and hold [SELECTOR] on the unit.- After a few seconds the display changes to show the current lowest frequency. Continue to hold the button down. The lowest frequency changes and the step is changed.You cannot switch on the iPod/iPhone/iPad.• Examine that the battery of the iPod/iPhone/iPad is not depleted.• Switch off the iPod/iPhone/iPad and the system before you connect the iPod/iPhone/iPad. Connect the iPod/iPhone/iPad and try again.No sound.• Switch off the iPod/iPhone/iPad and remove from the system. Connect the iPod/iPhone/iPad to the system and switch it on and play it again.iPod/iPhone/iPad does not charge.• Examine the connection.•Charging an iPod/iPhone/iPad whose battery is depleted:- When using the “iPod_Port” connection, turn this system on. Do not turn this system off until the iPod/iPhone/iPad becomes operational.- When using the “iPod_Dock” connection, “Checking Connection” will be displayed until the iPod/iPhone becomes operational, but this system will have begun charging.The USB device or the contents in it cannot be read.• The format of the USB device or the contents in it is/are not compatible with the system.• USB devices with storage capacity of more than 32 GB cannot work in some conditions.Slow operation of the USB device.• Large content size or large memory USB device takes longer time to read.The elapsed time shown is different from the actual play time.• Transfer the data to another USB device or backup the data and reformat the USB device.Pairing cannot be done.• Check the Bluetooth® device condition.The device cannot be connected.•The pairing of the device was unsuccessful or the registration has been replaced. Try pairing the device again.•This system might be connected to a different device. Disconnect the other device and try pairing the device again.The device is connected but audio cannot be heard through this system.• For some built-in Bluetooth® devices, you have to set the audio output to “SC-PMX9” manually. Read the operating instructions for the device for details.The sound is interrupted.• The device is out of the 10 m (33 ft) communication range. Bring the Bluetooth® device closer to this system.• Remove any obstacle between this system and the device.• Other devices that use the 2.4 GHz frequency band (wireless router, microwaves, cordless phones, etc.) are interfering. Bring the Bluetooth® device closer to this system and distance it from the other devices.• Select “Mode 1” for stable communication. (>12)Cannot connect to the network.• Confirm the network connection and settings. (>6)•Your wireless network might be set to be invisible. In this case select “Manual settings” in “Method 4”. (>9)• This system cannot join a wireless network using WEP security settings with the WPS methods (“Method 1”). Use “Method 4” to join the wireless network. (>9)• Make sure that the multicast function on the wireless network router is set to on (enabled).• When “D.Connect” is used, if the password for “D.Connect” has been changed connect the other device to this system using the new password. (>10)• Check that “Wireless LAN” is set to “On”. (>15)Cannot connect to this system.• Display the wireless network name that this system is connected to and make sure that the device is connected to the same network. (>6, 15)• If “Net Standby” is set to “Off”, the AirPlay compatible device cannot be connected when this system is off.• Turn off the Wi-Fi setting on the AirPlay compatible device, set “Net Standby” to “Off” (>15) and then turn this system off and on. Reconnect the compatible device to the Wi-Fi network and then select this system as the AirPlay speakers again.My wireless network router is WPS PBC compatible, but the pairing does not work.• If the network is set to be invisible, the push button configuration does not work. In this case, either make the wireless network visible while you set up the network for this system or use “Method 2”, “Method 3” or “Method 4”. (>8, 9)Playback does not start.The sound is interrupted.• Try a wired LAN connection. (>6)• Simultaneous use with other 2.4 GHz devices, such as microwaves, cordless telephones, etc., may result in connection interruptions.Increase the distance between this system and these devices.• Do not place this system inside a metal cabinet, for it might block the Wi-Fi signal.• Place this system closer to the wireless network router.• If “D.Connect” is set to “On”, place the AirPlay compatible device closer to the speakers.•If several wireless devices are simultaneously using the same wireless network as this system, try turning off the other devices or reducing their wireless network usage.Common problemsDiscRadioiPod/iPhone/iPadUSBBluetooth®AirPlay operationsSC-PMX9PP-VQT5J68_mst.book 16 ページ ２０１４年２月２５日　火曜日　午後１２時４分
17ENGLISHVQT5J68• If the playback stops, check the playback status on the iOS device or iTunes.•If play does not start (even though “ ” is displayed), restart the wireless network router, turn the Wi-Fi connection on the iOS device or Mac/PC off and on, and then make sure that your home wireless network is selected.• With some iOS and iTunes versions, it may not be possible to restart the AirPlay playback if the selector is changed (e.g., “CD”) or this system is turned off, during the AirPlay playback.In this case, select a different device from the AirPlay icon of the Music App or iTunes and then re-select this system as the output speakers. (>10)“--:--”• You connected the AC power supply cord for the first time or there was a power failure recently. Set the clock.“Adjust CLOCK”• Clock is not set. Adjust the clock accordingly.“Adjust TIMER”• Play timer is not set. Adjust the play timer accordingly.“Auto Off”•The unit has been left unused for about 20 minutes and will shut down in a minute. Press any button to cancel it.“CANNOT SET”• Select an audio source other than “AirPlay”, “BLUETOOTH” or “DLNA”.“Checking Connection”• The unit is checking the connected iPod/iPhone/iPad. If this display keeps appearing, make sure that iPod/iPhone/iPad is inserted correctly and try again.“DL Error”• The software download has failed. Press any button to exit. Please try again later.• The server cannot be found. Press any button to exit. Make sure that the wireless network is connected to the Internet.“Error”• An incorrect operation was done. Read the instructions and try again.“F61” or “F76”• There is a power supply problem.“Fail”• Updating or setting has failed. Read the instructions and try again.“iPod_Dock Over Current Error”“iPod_Port Over Current Error”• The iPod/iPhone/iPad or USB device is drawing too much power. Remove the iPod/iPhone/iPad or USB device. Switch the system off and on again.“Level 0”• There is no link between this system and the wireless network router.Try the following operations:– Check that the wireless network router is turned on.– Turn this system off and on again.– Reset the wireless network settings. (>6)If the problem persists, consult your dealer.“Level j”• When “D.Connect” is set to “On” the Wi-Fi signal strength cannot be checked. To check the Wi-Fi signal strength from the wireless network router, set “D.Connect” to “Off”. (>10)“Linking”• This system is communicating with the wireless network router to complete the network settings.Depending on the wireless network router this process may take a few minutes. Try moving this system closer to the wireless network router.“No Connect”• This system cannot connect to the network.Check the network connection. (>6)“No Device”• The iPod/iPhone/iPad or USB device is not connected.Examine the connection.“No Disc”• You have not put in a disc or put in a disc that the system cannot play.“No Play”•Examine the content. You can only play supported format.• If there are more than 255 albums or folders (audio and non-audio), some of the MP3/FLAC files in these albums cannot be read and played. Transfer these music albums to another USB device. Alternatively, reformat the USB device and save these music albums prior to saving the other non-audio folders.“Not MP3/Error”• An unsupported MP3 format. The system will skip that track and play the next one.“Not Supported”•You have inserted an iPod/iPhone/iPad that cannot be played.• Switch off the iPod/iPhone/iPad and the system before you connect the iPod/iPhone/iPad. Connect the iPod/iPhone/iPad and try again.• This message may be displayed when a wireless LAN connection is made without unlocking the iPod/iPhone/iPad. (>8, “Method 2”)“PGM Full”• The number of programed tracks is more than 24.“Reading”•The unit is checking the disc and USB device information. After this display has disappeared, start operating.“Set Wi-Fi”• The connected iPod touch/iPhone/iPad is not connected to a wireless network. Connect it to a wireless network and try again. (>6)“Wait”• This is displayed, for example, when this unit is turned off. (For up to 1 minute and 30 seconds)“ ” blinks• This may occur when, for instance, the network connection is interrupted.Reset the memory when the following situations occur:• There is no response when buttons are pressed.• You want to clear and reset the memory contents.1Disconnect the AC power supply cord.Wait 3 minutes before you continue with step 2.2While you press and hold [Í/I] on the main unit, connect the AC power supply cord again.“- - - - - - - - - - - -” is shown.3Release [Í/I].All the settings are set back to the factory preset.It is necessary to set the memory items again.When other Panasonic equipment responds to the remote control of this system, change the remote control code for this system.To set the code to “Remote 2”1Press [CD] to select “CD”.2Press and hold [CD] on the main unit and [2] on the remote control until “Remote 2” is shown.3Press and hold [OK] and [2] for a minimum of 4 seconds.• The factory preset is “Remote 1”.• To change the mode back to “Remote 1”, repeat the steps above but replace the button pressed on the remote control from [2] to [1].Main unit displaysMemory reset (initialisation)Remote control codeSC-PMX9PP-VQT5J68_mst.book 17 ページ ２０１４年２月２５日　火曜日　午後１２時４分
VQT5J6818ENGLISHSpecificationsRMS output powerFront Ch (both ch driven)60 W per channel (3 ™), 1 kHz,10% total harmonic distortionTotal RMS power 120 WFTC output powerFront Ch (both ch driven)20 W per channel (3 ™), 50 Hz to 20 kHz,1% total harmonic distortionTotal RMS power 120 WFrequency Modulation (FM)Preset memory 30 stationsFrequency range87.90 MHz to 107.90 MHz (200 kHz step)87.50 MHz to 108.00 MHz (100 kHz step)Antenna terminals 75 ™ (unbalanced)“iPod_Port” connectionDC OUT 5 V 2.1 A (max)USB standard USB 2.0Media file format support MP3 (*.mp3), FLAC (*.flac)USB device file system FAT16, FAT32ID3 Tag support v2.3“iPod_Dock” connectionDC OUT 5 V 1.0 A (max)Headphones jack Stereo, Ø 3.5 mm (1/8q) jackAudio input Pin jackLAN port 10 Base-T/100 Base-TXDisc played (8 cm (3q) or 12 cm (5q) )CD, CD-R/RW (CD-DA, MP3)Pick upWavelength 790 nm (CD)Laser power CLASS 1Audio output (Disc)Number of channels 2 ch (FL, FR)Speaker unit(s)Woofer 14 cm (51/2q) cone type x 1Tweeter 1.9 cm (3/4q) dome type x 1Super tweeter 1.2 cm (15/32q) piezo type x 1Impedance 3™Dimensions (W x H x D) 161 mm x 238 mm x 264 mm(611/32qk93/8qk1013/36q)Mass Approx. 3.0 kg (6.6 lbs)Bluetooth® system specification V3.0Wireless equipment classification Class 2Supported profiles A2DP, AVRCPFrequency band 2.4 GHz band FH-SSDriving distance 10 m (33 ft) Line of sightProspective communication distanceMeasurement environment: Temperature 25 oC (77 oF)/ Height 1 m (3.3 ft)Measure in “Mode 1”MP3Sampling frequency 32/44.1/48 kHz Audio word size 16 bits Channel count 2 ch Bit-rate 8-320 kbpsFLACSampling frequency32/44.1/48/88.2/96/176.4/192 kHz Audio word size 16 bits/24 bits Channel count 2 chWAV (DLNA only)Sampling frequency32/44.1/48/88.2/96/176.4/192 kHz Audio word size 16 bits/24 bits Channel count 2 chPower supply AC 120 V, 60 HzPower consumption 60 WDimensions (main unit)(W x H x D) 210 mm x 120 mm x 266 mm(8 9/39qk43/4qk10 1/2q)Mass (main unit) Approx. 3.1 kg(6.8 lbs)Operating temperature range 0°C to +40°CoC(r32 oF to r104 oF)Operating humidity range35% to 80% RH (no condensation)Note:• Specifications are subject to change without notice. Mass and dimensions are approximate.• Total harmonic distortion is measured by the digital spectrum analyzer.• Uncompressed FLAC files may not operate correctly.FLAC Decoder Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007 Josh CoalsonRedistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.Amplifier sectionTUNER SECTIONTerminals sectionDisc sectionSpeaker sectionBluetooth® sectionWi-Fi/AirPlay sectionWi-FiWLAN Standard IEEE802.11b/gFrequency range 2.4 GHz bandSecurity WEP (64 bit/128 bit),WPATM, WPA2TMWPS versionVersion 2.0 (WEP not support)Audio Support format (USB, DLNA)GeneralPower consumption in standby mode(When the iPod/iPhone/iPad is not charging)0.4 W (approximate)SC-PMX9PP-VQT5J68_mst.book 18 ページ ２０１４年２月２５日　火曜日　午後１２時４分
19ENGLISHVQT5J68Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)Panasonic Products Limited WarrantyLimited Warranty Coverage(For USA and Puerto Rico Only)If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”.Mail-In Service--Online Repair RequestOnline Repair RequestTo submit a new repair request and for quick repair status visit our Web Site at www.panasonic.com/repair.When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Limited Warranty Limits And ExclusionsThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.As of November 2013Product or Part Name Parts LaborCD Stereo System 1 Year 1 Year All included Accessories(Except Non-Rechargeable Batteries)90 Days Not ApplicableOnly Non-Rechargeable Batteries 10 Days Not ApplicableCustomer Services Directory (United States and Puerto Rico)Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:http://www.panasonic.com/supportor, contact us via the web at:http://www.panasonic.com/contactinfoFor hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico)Purchase Parts, Accessories and Owner’s Manual online for all Panasonic Products by visiting our Web Site at:http://www.pstc.panasonic.comOr, send your request by E-mail to:npcparts@us.panasonic.comYou may also contact us directly at:1-800-237-9080 (Fax Only)(Monday-Friday 9am-9pm EST)Panasonic National Parts Center20421 84th Avenue South, Kent, WA 98032(We accept Visa, MasterCard, Discover Card, American Express)For hearing or speech impaired TTY users, TTY: 1-866-605-1277 The model number and serial number of this product can be found on either the back or the bottom of the unit.Please note them in the space provided below and keep for future reference.MODEL NUMBERSC-PMX9SERIAL NUMBERUser memo:DATE OF PURCHASEDEALER NAMEDEALER ADDRESSTELEPHONE NUMBERSC-PMX9PP-VQT5J68_mst.book 19 ページ ２０１４年２月２５日　火曜日　午後１２時４分
VQT5J6820Limited Warranty (ONLY FOR CANADA)Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario L4W 2T3PANASONIC PRODUCT - LIMITED WARRANTYEXCHANGE PROGRAMPanasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIREDLIMITATIONS AND EXCLUSIONSThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.Dry cell batteries are also excluded from coverage under this warranty.THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.)In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory.CONTACT INFORMATIONPanasonic Portable / Clock Radio (without Tape, CD, MD)Panasonic Audio ProductPanasonic DVD ProductAccessories including rechargeable batteriesOne (1) yearOne (1) yearOne (1) yearNinety (90) daysFor product operation and information assistance, please visit our Support page:www.panasonic.ca/english/supportFor defective product exchange within the warranty period, please contact the original dealer.SC-PMX9PP-VQT5J68_mst.book 20 ページ ２０１４年２月２５日　火曜日　午後１２時４分
VQT5J68F0214TA0Panasonic Corporation of North AmericaTwo Riverfront Plaza, Newark, NJ 07102-5490http://www.panasonic.comC Panasonic Corporation 2014Printed in MalaysiaPanasonic Canada Inc.5770 Ambler Drive,Mississauga, Ontario,L4W 2T3www.panasonic.compAndroid, Google Play and Chrome are trademarks of Google Inc.DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance.The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license.Other trademarks and trade names are those of their respective owners.Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries.“Made for iPod”, “Made for iPhone”, and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.Lightning is a trademark of Apple Inc.App Store is a service mark of Apple Inc.SC-PMX9PP-VQT5J68_mst.book 21 ページ ２０１４年２月２５日　火曜日　午後１２時４分

Navigation menu