Panasonic of North America SC-NT10 Wireless Speaker System User Manual

Panasonic Corporation of North America Wireless Speaker System

Contents

05 (Short term Confidnetial)User Manual

VQT5A86
P PC
Owner’s Manual
Wireless Speaker System
Model No. SC-NT10
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this
manual for future use.
Register online at www.panasonic.com/register (U.S. customers only)
If you have any questions, contact:
U.S.A. and Puerto Rico : 1-800-211-PANA (7262)
Canada : 1-800-561-5505
until
2013/07/03
SC-NT10_VQT5A86_eng.book 1 ページ 2013年6月6日 木曜日 午後12時22分
VQT5A86
2
IMPORTANT SAFETY
INSTRUCTIONS
Read these operating instructions carefully before using
the unit. Follow the safety instructions on the unit and the
applicable safety instructions listed below. Keep these
operating instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table
specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
Do not let water or other liquids drip or splash inside
the unit.
Do not expose accessory to rain, moisture, dripping
or splashing.
Do not place objects filled with liquids, such as
vases, on accessory.
Use only the recommended accessory.
Do not remove the cover except disassembling for
discarding.
Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
USB cable
The cable is the disconnecting device. Install this unit
so that the cable can be unplugged from the USB
terminal of PC immediately.
CAUTION
Unit
Product identification marking is located on the
bottom of the unit.
Do not throw.
Do not hit this unit to anything. Do not apply strong pressure
to this unit. External case may break when strong impact is
applied, causing to damage or malfunction.
Do not leave the unit in a car exposed to direct
sunlight for a long period of time with doors and
windows closed.
Batteries
This unit has a built-in battery.
In order to secure splashproof performance, battery
replacement by the customer is not guaranteed. If
you desire battery replacement, please contact our
service department.
The following is the caution for removing the battery
when disposing of this unit (>16).
Do not heat or expose to flame.
Do not short circuit.
Do not disassemble, crush.
Do not re-use.
Do not place in microwave ovens.
Precautions
SC-NT10_VQT5A86_eng.book 2 ページ 2013年6月6日 木曜日 午後12時22分
3
VQT5A86
Turn off the power of this unit and wipe with dry soft
cloth. Disconnect the USB cable when the USB cable
is used.
When it get very dirty, wipe off dirt with a cloth
immersed in water and wrung strongly, and then
wipe with dry soft cloth.
Solvents such as benzine, thinner, alcohol, oil,
detergents, etc., may cause the external case to be
altered or the coating may come off, so do not use
them.
Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
THE FOLLOWING APPLIES ONLY
IN THE U.S.A.
FCC Note:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution: To assure continued compliance,
follow the attached installation instructions and
use only shielded interface cables when
connecting to peripheral devices.
Any changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Declaration of Conformity
Trade Name: Panasonic
Model No.: SC-NT10
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of
North America
Telephone No.: 1-800-211-PANA (7262)
THE FOLLOWING APPLIES ONLY
IN CANADA.
CAN ICES-3(B)/NMB-3(B)
THE FOLLOWING APPLIES IN THE
U.S.A. AND CANADA
This device complies with Part 15 of FCC Rules and
Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two
conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of this device.
FCC ID:ACJ-SC-NT10
IC: 216A-SCNT10
This transmitter must not be co-located or
operated in conjunction with any other antenna or
transmitter.
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to
OET65 and RSS-102 of the IC radio frequency
(RF) Exposure rules. This equipment has very low
levels of RF energy that is deemed to comply
without maximum permissive exposure evaluation
(MPE). But it is desirable that it should be installed
and operated keeping the radiator at least 20 cm
(7 7/8q) or more away from person’s body
(excluding extremities: hands, wrists, feet and
ankles).
A nickel metal hydride battery
that is recyclable powers the
product you have purchased.
Please call 1-800-8-BATTERY
for information on how to
recycle this battery.
Maintenance
SC-NT10_VQT5A86_eng.book 3 ページ 2013年6月6日 木曜日 午後12時22分
VQT5A86
4
Table of contents
IMPORTANT SAFETY INSTRUCTIONS.................................................. 2
Precautions............................................................................................... 2
Maintenance ............................................................................................. 3
Accessories .............................................................................................. 4
Control reference guide ............................................................................ 5
(Important) About the splashproof, dustproof,
shockproof and freezeproof/heatproof................................................... 6
About the power of this unit ...................................................................... 7
Listening to audio from a Bluetooth® device............................................. 8
Connecting via Bluetooth® menu ......................................................................... 8
One-Touch Connection (Connecting by NFC)..................................................... 9
Selecting Transmission mode setting ................................................................ 10
Disconnecting Bluetooth®.................................................................................. 10
Using Boost Mode .................................................................................. 11
Using the AUX input ............................................................................... 11
Auto Power Off ....................................................................................... 11
Receiving a call with Hands-Free ........................................................... 12
To return to the factory preset state........................................................ 12
Troubleshooting ...................................................................................... 13
Specifications.......................................................................................... 14
About Bluetooth®.................................................................................... 15
Licenses.................................................................................................. 15
To remove the battery when disposing of this unit ................................. 16
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) ............................................. 17
Limited Warranty (ONLY FOR CANADA)............................................... 19
Check the supplied accessories before using this unit.
1 USB cable (K1HY04YY0074)
The USB cable is dedicated for this unit, so do not use with other devices. Also, do not use
the USB cable for other devices with this unit.
Note
Product numbers provided in this Owner’s Manual correct as of June 2013. These may be subject
to change.
(ONLY FOR CANADA) The enclosed Canadian French label sheet corresponds to the English
display on the unit.
Accessories
SC-NT10_VQT5A86_eng.book 4 ページ 2013年6月6日 木曜日 午後12時22分
5
VQT5A86
Control reference guide
5
4
1
2
3
6 7 8 9 10
11
13
14
12
1 Terminal cover
2 Strap hole
3 AUX IN jack (>11)
4 DC IN terminal
5 RESET
Use a paper clip, etc., to press the
switch if this unit does not operate
correctly, like when you cannot turn
off/on the power.
6 Battery indicator (red) (>7)
Indicates the battery status.
7 Bluetooth® indicator (blue)
8 Boost Mode indicator (orange)
9 Boost button (>11)
10 Microphone (>12)
11 Power on/off button [Í/I]
Press to switch the unit from on to
standby mode or vice versa. In
standby mode, the unit is still
consuming a small amount of power.
12 Bluetooth® pairing button (>8)/
Play button (below)/Pause
button (below)/Receiver button
(>12)
Play / Pause: Press this button to
switch between play and pause while
playing music with the paired device.
13 NFC touch area (>9)
14 Volume buttons
SC-NT10_VQT5A86_eng.book 5 ページ 2013年6月6日 木曜日 午後12時22分
VQT5A86
6
Cautions for using around
water
Conform to following. Improper use may result in a
malfunction.
Securely close the terminal cover.
Do not open or close the terminal cover with wet
hands or when water droplets are on this unit. Doing
so may cause malfunction such as terminal rusting
with the water droplets.
Do not connect and use a USB cable or an audio
cable (not supplied).
Do not pour soap water or detergent, or immerse in
water.
Remove any hair, lint, sand, dust, etc., that may be
attached to the rubber seal on the terminal cover
before closing.
Leaving the device with water droplets in a cold
region may result to malfunction such as the covers
stuck closed.
The sound may become smaller or warped when
water is accumulated in the speaker or microphone
of this unit. Wipe this unit with dry soft cloth.
Water may accumulate inside the speaker of this
unit. Tilt the set toward the water drain hole to drain
water.
If this product is routinely used outdoors, in a very
humid environment, or in a manner that relies on
the splash-proof durability of this product, the
splash proof performance of the product is
maintained for 2 years. Please contact Panasonic’s
service department for more information.
When water enters inside this unit, stop using this
unit, and contact the nearest Dealer or Service
Center. Malfunction due to exposure to water by
improper handling by the customer will not be
covered by the warranty. Supplied accessories are
not splashproof.
(Important) About the splashproof, dustproof,
shockproof and freezeproof/heatproof
Splashproof performance*
Specifications for this unit are equivalent of IPX4 of IEC 60529.
About the IPX4 (liquid ingress protection level against splashing water)
This unit is compatible to operate after splashing from nozzles approximately 1.8 L/min (0.5 gallon/min)
of room temperature tap water from every direction approximately 20 cm (8q) from this unit for
10 minutes. Supplied USB cable is not splashproof.
Dustproof performance*
Dustproof performance test established by company has been passed. (Corresponds to the fact that
this unit operates. Does not apply to items concerning change in appearance such as paint peeling,
deformation, contamination, etc.)
Shockproof performance*
This unit has passed the test where product is dropped from height of 76 cm (30q) in the downward
direction (2 surfaces, 8 side surfaces) on a piece of plywood that is 3 cm (1 3/16q) thick. (Corresponds
to the fact that the device operates. Does not apply to items concerning change in appearance such as
paint peeling and deformation of parts where collision occurred.)
Freezeproof/Heatproof performance*
Performance is guaranteed under -10 oC to i50 oC (i14 oF to i122 oF) ambient temperature.
For safety reasons, this device will automatically shutdown when it reaches a certain temperature level.
* Non-destruction, non-failure or splashproof is not guaranteed under all
conditions.
The bottom of the unit
Water drain
hole
SC-NT10_VQT5A86_eng.book 6 ページ 2013年6月6日 木曜日 午後12時22分
7
VQT5A86
This unit has a built-in battery. Please charge the battery before using this unit for the
first time.
If the battery level is low when this unit is turned on, the Battery indicator (red) (>5) blinks slowly.
Charging the battery
Connect this unit with the power turned off and the PC with the power turned on using
the USB cable (supplied).
If charging is necessary, the Battery indicator (red) lights. When charging is complete,
the Battery indicator goes off.
*1 Calculated by the test method established by the company [while connecting with Bluetooth®,
turning off Boost Mode (>11), using at the surrounding temperature of 25 oC (i77 oF)]
*2 When charging at the surrounding temperature of 25 oC (i77 oF) after the battery is depleted.
Using and charging with connecting to a PC turned on
Press [Í/I] for turning on this unit. The Bluetooth® indicator (blue) blinks or lights, and it
is possible to operate this unit with the supplied power from a PC.
The volume may become smaller depending on the supplier performance when operating with USB
connection. It is recommended to connect to a device with supply performance of 1.6 A or larger
when full power playback with USB connection is required.
It takes longer to charge while this unit is turned on.
Note
You may need to charge the battery before using this unit.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed.)
Charge the battery at least once every 6 months.
Communication is not possible when this unit is connected to a PC with the USB cable.
Charging will not start if the battery level is sufficiently high even if it is not full.
It is recommended to charge the battery in the temperature of between 5 oC and 35 oC (i41 oF and
i95 oF). The Battery indicator (red) may flash and charging may not be possible when it is out of
recommended temperature range.
The battery may not charge when the temperature surrounding the battery is high during the
operation or right after the operation even when it is within the recommended temperature range. In
such case, stop the usage and let it cool down.
To ensure safety, in the case of an excessive input signal, the system may be automatically
interrupted and power is turned off.
About the power of this unit
Battery life in use Approx. 8 hours*1
Battery Charge time Approx. 5 hours*2
Rechargeable times
About 500 times
USB cable (supplied)
SC-NT10_VQT5A86_eng.book 7 ページ 2013年6月6日 木曜日 午後12時22分
VQT5A86
8
Preparation
While charging this unit or after charging this unit, turn on the Bluetooth®
feature of the device and place the device near this unit.
If you intend to use an NFC (Near Field Communication)-compatible
Bluetooth® device, proceed to
One-Touch Connection (Connecting by
NFC)” (>9).
For each Bluetooth® device you want to connect to via Bluetooth®, perform
pairing first.
Pairing with
Bluetooth
®
device
1 Press [Í/I] to turn this unit on.
The Bluetooth® indicator (blue) blinks slowly.
If this unit is being used for the first time (factory preset state):
The Bluetooth® indicator (blue) blinks fast. The unit will enter pairing standby.
Skip to step 3.
2 Press and hold [ ] until the Bluetooth® indicator (blue) blinks
fast.
The unit will enter pairing standby.
3 Select “SC-NT10” from the Bluetooth® device’s Bluetooth® menu.
When the Bluetooth® device is paired and connected, the Bluetooth® indicator (blue) on the
unit lights up.
If prompted for a passkey, input “0000”.
If the Bluetooth® device need to operate the Bluetooth® pairing setting and the Bluetooth®
connecting setting, operate both settings.
4 Start playing back music, a movie, etc. on your Bluetooth® device.
Adjust the volume using the [VOL -/VOL +] buttons on the unit.
When the maximum or minimum volume is reached, you will be notified by a beep sound.
Listening to audio from a paired device
When this unit is turned on, the Bluetooth® indicator (blue) will blink slowly
indicating that the unit is in connection standby mode. Please perform Steps
3 and 4.
When the power is turned on, this unit is connected to the last-used Bluetooth® device. At this point,
please perform Step 4.
Listening to audio from a Bluetooth® device
Connecting via Bluetooth® menu
SC-NT10_VQT5A86_eng.book 8 ページ 2013年6月6日 木曜日 午後12時22分
9
VQT5A86
For NFC-compatible AndroidTM devices only
By simply touching this unit to an NFC (Near Field Communication)-compatible
Bluetooth
®
device, this unit automatically turns on, and performs the starting
operation, from pairing the Bluetooth
®
device to establishing a connection.
Designed to skip the starting operation, this feature is very convenient.
About NFC (Near Field Communication)
It is a short range wireless technology that makes use of interacting radio communications.
Preparation
Turn on the NFC feature of the device. And connect the device to the
internet to install a dedicated app. Separate data charges apply for the
internet use.
1 Download the app “Panasonic Music Streaming” (free of charge) to
your Bluetooth® device from Google PlayTM.
Enter “Panasonic Music Streaming” in the search box of Google PlayTM and search
select “Panasonic Music Streaming” to download the app
2 Start the app “Panasonic Music Streaming” on your Bluetooth®
device.
Follow on-screen instructions on your device.
Always use the latest version of the app.
3 Touch and hold your device on the NFC touch area of this unit.
(Until a pop-up window on your device indicates that the
connection is established.)
When this unit turns on and a connection is established, the Bluetooth® indicator (blue)
lights up.
When the Bluetooth® indicator (blue) does not light up even if you have touched the NFC
touch area, change the touching position.
4 Start playing back music, a movie, etc. on your Bluetooth® device.
Connecting to another device
If you touch another device to this unit, you can update the Bluetooth®
connection. The previously connected device will be disconnected
automatically.
One-Touch Connection (Connecting by NFC)
SC-NT10_VQT5A86_eng.book 9 ページ 2013年6月6日 木曜日 午後12時22分
VQT5A86
10
You can change the transmission speed to prioritize sound quality or
connectivity.
The default setting is “Sound Quality Priority MODE”. When the sound is interrupted, select
“Connectivity Priority MODE”.
1 Set either of the following modes.
Sound Quality Priority MODE:
While pressing and holding [ ], press and hold
[VOL -]
until
the Bluetooth® indicator (blue) and the Boost Mode indicator
(orange) blink once.
Connectivity Priority MODE:
While pressing and holding
[BOOST]
, press and hold [VOL -]
until the Bluetooth® indicator (blue) and the Boost Mode
indicator (orange) blink once.
2 Press [Í/I] to turn this unit off, and press [Í/I] again to turn on.
The Bluetooth® connection is automatically established, and the Bluetooth® indicator (blue)
lights up.
Turn off this unit or the device.
Stop / disable the Bluetooth® transmission of the device.
(For NFC-compatible devices only)
Touch and hold your device to NFC touch area of this unit again.
Note
This unit can only be connected to one device at a time.
This unit can register up to 8 devices. If a 9th device is paired, the device that has not been used for
the longest time will be replaced.
Even when this unit is turned off, if this unit is connected to the PC that is powered on with an USB
cable and this unit is selected on the device that is paired with this unit, power of this unit will be
turned on and connected via Bluetooth® automatically.
If the image and sound are out of sync during playback, restart the playback app you are using. If
the problem persists, connect
the Bluetooth
®
device
and this unit with an audio cable.
The One-Touch Connection may not work properly depending on the type of device being used.
Selecting Transmission mode setting
Disconnecting Bluetooth®
SC-NT10_VQT5A86_eng.book 10 ページ 2013年6月6日 木曜日 午後12時22分
11
VQT5A86
It will make the sound played back on this unit easier to hear by boosting the
level of specific frequency band.
Press
[BOOST]
of this unit to switch the effect on/off.
The Boost Mode indicator (orange) lights up.
Note
If sound is distorted during playback, switch off the “Boost Mode”.
When saving the power consumption, set “Boost Mode” to “off”.
Location of this unit may move due to vibration.
You can listen to the audio via AUX IN jack (>5) when this unit is connected
to the device with the audio cable (not supplied).
Note
When using the AUX input, the Bluetooth® audio, NFC features, and [ ] are not available.
(It will be possible to receive a call hands-free by pressing [ ] when there is a call coming in on
the device connected with Bluetooth®. >12)
The setting of the Bluetooth® is not changed even if inserting the audio cable (not supplied) from
AUX IN jack.
When using the AUX input, the volume may seem low depending on the connected device. In that
case, check if the volume limit can be changed on the device. For details, refer to the manual of the
device.
This unit automatically turns off if there is no audio input and no operation is
performed for approximately 10 minutes.
Note
This function will not operate when the AUX input is used while connected with the USB cable.
This function may operate even when the music is being played back if the volume of the connected
device is low.
This function may not operate depending on the connected device.
Using Boost Mode
Using the AUX input
Auto Power Off
SC-NT10_VQT5A86_eng.book 11 ページ 2013年6月6日 木曜日 午後12時22分
VQT5A86
12
If receiving a call on the mobile phone connected to this unit with Bluetooth®,
you can make a hands-free call through this unit.
Preparation
For connecting Bluetooth®, refer to “Connecting via Bluetooth® menu” (>8)
or “One-Touch Connection (Connecting by NFC)” (>9).
Receiving a call
Press [ ] when this unit rings.
When receiving the call, the Bluetooth® indicator (blue) on the unit blinks.
Talk into the microphone (>5) on this unit.
Ending the call
Press [ ].
Note
Adjust the volume during a call with [VOL +] and [VOL -] on this unit.
During a hands-free call, if you want to switch from this unit to the hands-free device, operate the
hands-free device.
If this unit receives a call while playing audio with Bluetooth®, it changes the audio to a ringtone
automatically. In addition, during playback with the AUX IN jack, the audio of this unit automatically
changes to a ringtone of the pairing device.
If you touch other devices to the NFC touch area of this unit when receiving a call, Bluetooth®
connection will not switch.
To mute the ringtone of this unit, press [VOL -] until the volume reaches minimum.
Some apps for the mobile phone may not be available for hands-free.
Perform the following when you want to delete pairing device information,
etc.
1 Press [Í/I] to turn the power on.
2 Press and hold [Í/I] for 10 seconds until Bluetooth® indicator
(blue) and Boost Mode indicator (orange) blink twice.
The pairing device information will be deleted by the reset, so it will be necessary to
perform pairing again. Delete the pairing information for this unit from the Bluetooth®
device, then perform the pairing operation again. (See “Pairing with Bluetooth® device”
>8)
Receiving a call with Hands-Free
To return to the factory preset state
SC-NT10_VQT5A86_eng.book 12 ページ 2013年6月6日 木曜日 午後12時22分
13
VQT5A86
Before requesting service, make the following checks.
If you are in doubt about some of the check points, or if the solutions
indicated in the following guide do not solve the problem, refer to “Customer
Services Directory (United States and Puerto Rico)” (>18) if you reside in
the U.S.A. or Puerto Rico, or refer to “Limited Warranty (ONLY FOR
CANADA)” (>19) if you reside in Canada.
Sound from the device is cut off.
The device is out of the 10 m (33 ft.) communication range. Move the
device nearer to this unit. (See About Bluetooth® >15)
Remove any obstacle between this unit and the device.
Switch off any wireless LAN device.
Select “Connectivity Priority MODE” for stable communication. (See
Selecting Transmission mode setting” >10)
The device cannot be connected.
Refer to the operating instructions of the device, and perform the pairing
operation again. (See Pairing with Bluetooth® device” >8)
Make sure that this unit is not connected to a different device.
The device is connected but audio cannot be heard from this unit.
For some built-in Bluetooth® devices, you have to set the audio output to
“SC-NT10” manually. Read the operating instructions of the device for
details.
This unit is not operating correctly. For example, this unit turns off all
of a sudden or all indicator blink.
A problem has occurred. Turn off this unit, disconnect USB cable and
press [RESET] (>5).
The One-Touch Connection (NFC feature) is not working.
Turn on the NFC feature of the device.
Volume is low when this unit is connected to a TV via Bluetooth®.
Adjust the volume on the TV. The volume of headphone output may be
coupled with the volume of the Bluetooth® output depending on the TV. In
such case, adjust the volume of the headphone output on the TV.
Troubleshooting
SC-NT10_VQT5A86_eng.book 13 ページ 2013年6月6日 木曜日 午後12時22分
VQT5A86
14
Notes on Speakers
Decrease the volume when the audio is distorted.
Specifications
Amplifier section
Output power
RMS Output Power
10 % total harmonic distortion
Front ch (both ch driven):
2 W per channel (1 kHz, 6 , Boost Mode)
Total RMS power:
4W
FTC Output Power
1.0 % total harmonic distortion
Front ch (both ch driven):
110 Hz j 20 kHz 1.4 W per channel
(6 , Boost Mode)
Total FTC power:
2.8 W
Speaker section
Front Speaker (L/R)
Type:
1 way 1 speaker system
Unit(s):
φ34 mm (1 3/8q)
Impedance:
6
Passive Radiator:
φ50 mm (2q)
Bluetooth® section
Bluetooth® system specification:
Bluetooth®Ver. 3.0
Wireless equipment classification:
Class 2(2.5mW)
Supported profiles:
A2DP/AVRCP/HFP
Supported codec:
SBC
Frequency band:
2.4 GHz band FH-SS
Operating distance:
Approx. 10 m (33 ft.) Line of Sight
Prospective communication distance.
Measurement environment:
Hight 1.0 m (3.3 ft.)
Microphone section
Type:
Mono
Terminals section
DC IN:
USB Micro Type B
AUX input:
Stereo 3.5 mm (1/8q) jack
General
Power supply:
DC IN 5V 0.6A
Internal Battery 3.6 V (NiMH 1500 mAh)
Battery Life in Use:
Approx. 8 h (Normal Mode, Bluetooth®)
Approx. 1.5 h (Boost Mode, Bluetooth®)
Battery Charge Time:
Approx. 5 h
Dimensions (W k H k D):
120 mm k 53.8 mm k 120 mm
(4 23/32q k 2 1/8q k 4 23/32q)
Mass (Weight):
Approx. 330 g (0.73 lbs)
Operating temperature range:
-10 oC to i50 oC (i14 oF to i122 oF)
Operating humidity range:
35% to 80% RH (no condensation)
Splash Proof:
IPX4 equivalent
Shock Proof:
76 cm (30q) Drop
Note
Specifications are subject to change without notice. Mass and dimensions are approximate.
Total harmonic distortion is measured by a digital spectrum analyzer.
SC-NT10_VQT5A86_eng.book 14 ページ 2013年6月6日 木曜日 午後12時22分
15
VQT5A86
Frequency band used
This unit uses the 2.4 GHz frequency band.
Certification of this device
This unit conforms to frequency restrictions and has
received certification based on frequency laws,
Thus, a wireless permit is not necessary.
The actions below are punishable by law in some
countries:
Taking apart/modifying the unit.
Removing specification indications.
Restrictions of use
Wireless transmission and/or usage with all
Bluetooth® equipped devices is not guaranteed.
All devices must conform to standards set by
Bluetooth SIG, Inc.
Depending on the specifications and settings of a
device, it can fail to connect or some operations can
be different.
This system supports Bluetooth® security features.
But depending on the operating environment and/or
settings, this security is possibly not sufficient.
Transmit data wirelessly to this system with caution.
This system cannot transmit data to a Bluetooth®
device.
Range of use
Use this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the
environment, obstacles or interference.
Interference from other devices
This unit may not function properly and troubles
such as noise and sound jumps may arise due to
radio wave interference if this unit is located too
close to other Bluetooth® devices or the devices
that use the 2.4 GHz band.
This unit may not function properly if radio waves
from a nearby broadcasting station, etc. is too
strong.
Intended usage
This unit is for normal, general use only.
Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals,
laboratories, etc).
Android and Google Play are trademarks of
Google Inc.
The Bluetooth® word mark and logos are
owned by the Bluetooth SIG, Inc. and any use
of such marks by Panasonic Corporation is
under license. Other trademarks and trade
names are those of their respective owners.
-If you see this symbol-
About Bluetooth®
Panasonic bears no responsibility for
data and/or information that is
compromised during a wireless
transmission.
Licenses
Information on Disposal in
other Countries outside the
European Union
This symbol is only
valid in the
European Union.
If you wish to discard
this product, please
contact your local authorities or
dealer and ask for the correct
method of disposal.
SC-NT10_VQT5A86_eng.book 15 ページ 2013年6月6日 木曜日 午後12時22分
VQT5A86
16
Use up the battery before disassembling. (For Cautions of the battery >2)
Keep the rubber sheets and the screws out of reach of children to prevent swallowing.
Insulate the A with cellophane tape or similar.
Do not disassemble the battery.
To remove the battery when disposing of this
unit
The following instructions are not intended for repairing purposes but for the
disposal of this unit. This unit is not restorable once disassembled.
When disposing of this unit, take out the battery installed in this unit and
recycle it.
321
456
SC-NT10_VQT5A86_eng.book 16 ページ 2013年6月6日 木曜日 午後12時22分
17
VQT5A86
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Products Limited Warranty
Limited Warranty Coverage
(For USA and Puerto Rico Only)
If your product does not work properly because
of a defect in materials or workmanship,
Panasonic Consumer Marketing Company of
North America (referred to as “the warrantor”)
will, for the length of the period indicated on the
chart below, which starts with the date of original
purchase (“warranty period”), at its option either
(a) repair your product with new or refurbished
parts, (b) replace it with a new or a refurbished
equivalent value product, or (c) refund your
purchase price. The decision to repair, replace or
refund will be made by the warrantor.
During the “Labor” warranty period there will be
no charge for labor. During the “Parts” warranty
period, there will be no charge for parts. This
Limited Warranty excludes both parts and labor
for non-rechargeable batteries, antennas, and
cosmetic parts (cabinet). This warranty only
applies to products purchased and serviced in
the United States or Puerto Rico. This warranty
is extended only to the original purchaser of a
new product which was not sold “as is”.
Mail-In Service--Online or Telephone
Repair Request
Online Repair Request
To submit a new repair request and for quick repair
status visit our Web Site at www.panasonic.com/
repair.
Telephone Repair Request
You may contact us at : 1-800-211-PANA (7262)
When shipping the unit, carefully pack, include
all supplied accessories listed in the Owner’s
Manual, and send it prepaid, adequately insured
and packed well in a carton box. When shipping
Lithium Ion batteries please visit our Web Site at
www.panasonic.com/BatteryHandling as
Panasonic is committed to providing the most up
to date information. Include a letter detailing the
complaint, a return address and provide a
daytime phone number where you can be
reached. A valid registered receipt is required
under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY
PERIOD, THE PURCHASER WILL BE REQUIRED
TO FURNISH A SALES RECEIPT/PROOF OF
PURCHASE INDICATING DATE OF PURCHASE,
AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE
REPAIR OF ANY UNIT RECEIVED WITHOUT
SUCH PROOF OF PURCHASE.
Limited Warranty Limits And
Exclusions
This warranty ONLY COVERS failures due to
defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic
damage. The warranty ALSO DOES NOT
COVER damages which occurred in shipment,
or failures which are caused by products not
supplied by the warrantor, or failures which result
from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance,
power line surge, lightning damage,
modification, introduction of sand, humidity or
liquids, commercial use such as hotel, office,
restaurant, or other business or rental use of the
product, or service by anyone other than a
Factory Service Center or other Authorized
Servicer, or damage that is attributable to acts of
God.
Product or Part Name Parts Labor
Wireless Speaker
System 1 Year 1 Year
All included
Accessories
(Except
Non-Rechargeable
Batteries)
90 Days Not
Applicable
Only
Non-Rechargeable
Batteries
10 Days Not
Applicable
SC-NT10_VQT5A86_eng.book 17 ページ 2013年6月6日 木曜日 午後12時22分
VQT5A86
18
THERE ARE NO EXPRESS WARRANTIES
EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT,
OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY.
(As examples, this excludes damages for lost time,
travel to and from the servicer, loss of or damage to
media or images, data or other memory or recorded
content. The items listed are not exclusive, but for
illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or
limitation of incidental or consequential
damages, or limitations on how long an implied
warranty lasts, so the exclusions may not apply
to you.
This warranty gives you specific legal rights and
you may also have other rights which vary from
state to state. If a problem with this product
develops during or after the warranty period, you
may contact your dealer or Service Center. If the
problem is not handled to your satisfaction, then
write to the warrantor’s Consumer Affairs
Department at the addresses listed for the
warrantor.
PARTS AND SERVICE, WHICH ARE NOT
COVERED BY THIS LIMITED WARRANTY, ARE
YOUR RESPONSIBILITY.
As of May 2013
Customer Services Directory (United States
and Puerto Rico)
Obtain Product Information and Operating
Assistance; locate your nearest Dealer or
Service Center; purchase Parts and
Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm,
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users,
TTY: 1-877-833-8855
Accessory Purchases (United States and
Puerto Rico)
Purchase Parts, Accessories and Instruction
Books online for all Panasonic Products by
visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080
(Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card,
American Express)
For hearing or speech impaired TTY users,
TTY: 1-866-605-1277
The model number and serial number of this
product can be found on either the back or the
bottom of the unit.
Please note them in the space provided below
and keep for future reference. User memo:
DATE OF PURCHASE
MODEL NUMBER SC-NT10 DEALER NAME
DEALER ADDRESS
SERIAL NUMBER
TELEPHONE NUMBER
SC-NT10_VQT5A86_eng.book 18 ページ 2013年6月6日 木曜日 午後12時22分
19
VQT5A86
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
EXCHANGE PROGRAM
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship
under normal use and for a period as stated below from the date of original purchase agrees to, at its
option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a
refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace
or refund will be made by Panasonic Canada Inc.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift,
of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and
purchased and used in Canada, which product was not sold “as is”, and which product was delivered
to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE
RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID
AND PLACE OF PURCHASE IS REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or
service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN
NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the
Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of
items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions
may not be applicable. This warranty gives you specific legal rights and you may have other rights
which vary depending on your province or territory.
CONTACT INFORMATION
Panasonic Portable / Clock Radio (without Tape, CD, MD)
Panasonic Audio Product
Panasonic DVD Product
Accessories including rechargeable batteries
One (1) year
One (1) year
One (1) year
Ninety (90) days
For product information and operation assistance, please contact:
Our Customer Care Centre: Telephone #:
Fax #:
1-800-561-5505
(905) 238-2360
For defective product exchange within the warranty period, please contact the original dealer or our Customer
Care Centre.
SC-NT10_VQT5A86_eng.book 19 ページ 2013年6月6日 木曜日 午後12時22分
USA Only: Disposal may be regulated in your community due to environmental
considerations. For disposal or recycling information, please visit Panasonic
website:
http://www.panasonic.com/environmental/
or call 1-888-769-0149.
Printed in Malaysia
Panasonic Corporation 2013
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Consumer Marketing
Company of North America,
Division of Panasonic Corporation
of North America
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
Panasonic Canada Inc.
www.panasonic.ca
VQT5A86
F0613HA0
SC-NT10_VQT5A86_eng.book 20 ページ 2013年6月6日 木曜日 午後12時22分

Navigation menu