Panasonic of North America TI114A Vehicular Bluetooth Transceiver User Manual Click here and type date

User Manual

The device under test is manufactured by the grantee (Panasonic Corporation of North America),

and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee

must ensure the end-user has all applicable / appropriate operating instructions. When end-user

instructions are required, as in the case of this product, the grantee must notify the OEM to notify the

end-user.

Panasonic Corporation of North America will supply this document to the reseller/distributor

dictating what must be included in the end user’s manual for the commercial product.

INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL

The following information (in blue) must be included in the end product user’s manual to

ensure continued FCC regulatory compliance. The ID numbers must be included in the

manual if the device label is not readily accessible to the end user. The compliance

paragraphs below must be included in the user's manual.

******************************************************************************

FCC ID: ACJ-TI114A

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

Note: Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

******************************************************************************