Panasonic DMP BDT350 User Manual To The 718bbbb5 0412 4e12 88c1 5d5b382e2e85

User Manual: Panasonic DMP-BDT350 to the manual

Open the PDF directly: View PDF .
Page Count: 49

Download
Open PDF In Browser	View PDF

DMP-BDT300_VQT2J87_eng.book 1 ページ

２０１０年１月２１日

木曜日

午後８時９分

Operating Instructions
Blu-ray Disc Player
Model No. DMP-BDT300
DMP-BDT350

Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future
reference.

If you have any questions contact

U.S.A. and Puerto Rico : The warranty can be found on
page 46.
Canada :The warranty can be found on page 47.

U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505

La referencia rápida en español se puede encontrar en la página 48.

VQT2J87

until
2010/2/8

DMP-BDT300_VQT2J87_eng.book 2 ページ

２０１０年１月１８日

月曜日

午後５時２７分

Getting started

IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for
future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a
third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.

WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE,
≥DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
≥USE ONLY THE RECOMMENDED
ACCESSORIES.
≥DO NOT REMOVE THE COVER (OR BACK);
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK
OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.

VQT2J87(ENG)

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached
installation instructions and use only shielded interface cables when
connecting to peripheral devices.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)

DMP-BDT300_VQT2J87_eng.book 3 ページ

２０１０年１月２１日

木曜日

午後８時９分

Settings

2
4
4
5
6

Connections & Settings
STEP 1 : Connecting to a TV . . . . . . 8
STEP 2 : Connecting to
an amplifier/receiver . . . . 10
STEP 3 : Connecting to
a broadband network . . . . 12
STEP 4 : Connecting to
an AC power . . . . . . . . . . 14
STEP 5 : Setting . . . . . . . . . . . . . . . 14
STEP 6 : Reprogramming
the remote control . . . . . . 17

Troubleshooting guide . . . . . . . . . .
Messages . . . . . . . . . . . . . . . . . . . .
Audio Information . . . . . . . . . . . . . .
About MP3/JPEG/DivX/
AVCHD/MPEG2 files . . . . . . . . . . .
Supplemental information . . . . . . . .
Specifications . . . . . . . . . . . . . . . . .
Glossary . . . . . . . . . . . . . . . . . . . . .
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) . . .
Limited Warranty
(Only for CANADA). . . . . . . . . . . . .
Referencia rápida en español
(Spanish Quick Reference) . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . .

34
37
38
40
42
43
45
46
47
48
49

Settings

18
18
19
23
24
25
25
26

≥ Instructions for operations are generally described
using the remote control.
≥ These operating instructions are applicable to models
DMP-BDT300 and DMP-BDT350.
[BDT300] [BDT350] : indicates features applicable to
DMP-BDT300 and DMP-BDT350, respectively.

About Firmware updates (> 17)

Reference

About descriptions in these operating
instructions

Playback
Inserting or removing media . . . . . .
FUNCTIONS menu . . . . . . . . . . . . .
Playing video contents . . . . . . . . . .
Enjoying 3D video . . . . . . . . . . . . . .
Playing still pictures . . . . . . . . . . . .
Playing music . . . . . . . . . . . . . . . . .
Enjoying VIERA CASTTM . . . . . . . . .
DLNA feature [BDT350]. . . . . . . . . . . . .
Linked operations with the TV
(VIERA Link “HDAVI Control ”) . . . . . . . . . . .

Playback menu . . . . . . . . . . . . . . . . 28
Setup menu . . . . . . . . . . . . . . . . . . 30

Connections & Settings

IMPORTANT SAFETY
INSTRUCTIONS . . . . . . . . . . . . . . . .
Accessory . . . . . . . . . . . . . . . . . . . . .
Unit and media care . . . . . . . . . . . . .
Control reference guide . . . . . . . . . .
Playable discs/Cards/
USB devices . . . . . . . . . . . . . . . . . . .

Playback

Getting started

Table of contents

VQT2J87(ENG)

VQT2J87~Body_eng.fm 4 ページ

２０１０年１月２７日

水曜日

午前９時１４分

Accessory

Unit and media care

Check the supplied accessories before using this unit.

∫ Clean this unit with a soft, dry cloth

Remote control
(N2QAYB000508)

Audio/Video cable
(K2KA6BA00004)

≥ Never use alcohol, paint thinner or benzine to clean this
unit.
≥ Before using chemically treated cloth, carefully read the
instructions that came with the cloth.

Batteries for remote control

AC power supply cord
(K2CB2CB00022)

Wireless LAN Adaptor (DY-WL10*)
(C5ZZZ0000048)

USB extension cable (DY-WL10*)
(K2KYYYY00064)

∫ Clean the lens with the lens cleaner
disc

* DY-WL10 includes Wireless LAN Adaptor and USB
extension cable, and it is sold in the market.
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to
the English display on the front and back side of the unit.

≥ Product numbers correct as of January 2010. These may be subject to
change.
≥ Do not use AC power supply cord and Wireless LAN Adaptor with other
equipment. Wireless LAN Adaptor is not designed to use with PC.
≥ MAC address is stated on the bottom of Wireless LAN Adaptor.
≥ Only for U.S.A. and Puerto Rico: To order accessories, refer to “Accessory
Purchases (United States and Puerto Rico)” on page 46.
For other areas: To order accessories, call the dealer from whom you
have made your purchase.

Using the remote control
Insert so the poles (i and j) match those in the remote
control.




Lens cleaner disc: RP-CL720PP (not included)
≥ This lens cleaner is sold as specific for DIGA, but can be
used on this unit as well.

∫ Clean discs
DO

DO NOT

Wipe with a damp cloth and then wipe dry.

∫ Disc and card handling precautions
≥ Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals
on the rear side of the card.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed stickers or
labels (rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.

∫ To dispose or transfer this unit
R6/LR6, AA
(Alkaline or manganese batteries)
Point it at remote control signal sensor on this unit. (> 5)

Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight
for a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place

CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.

VQT2J87(ENG)

The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then follow
the procedure to return all the settings to the factory presets to
delete the user settings. (>34, “To return all settings to the
factory preset.”)
≥ The operation history may be recorded in the memory of
this unit.

DMP-BDT300_VQT2J87_eng.book 5 ページ

２０１０年１月２１日

木曜日

午後８時９分

1
2

13
3

4
5
6
7
8
9

14
3
15
16
4

10
11
12
13

17
18

5
6

19
7
8

9
10

14
15
16
17
18
19
20
21
22

Turn the unit on and off (> 14)
Open or close the disc tray (> 18)
CAUTION
Do not place objects in front of the unit. The disc tray may
collide with objects when it is opened, and this may cause
malfunction.
Select title numbers, etc./Enter numbers or characters
(> 25)
[CANCEL] : Cancel
Basic playback control buttons (> 19)
Show status messages (> 19)
Show Top menu/Direct Navigator (> 19)
Selection/OK, Frame-by-frame (> 19)
Show sub menu (> 20)
These buttons are used when;
≥ Operating a BD-Video disc that includes JavaTM
applications (BD-J).
≥ Displaying “Title View” and “Album View” screens.
(> 24)
≥ Operating contents of VIERA CAST. (> 25)
Show Setup menu (> 30)
Switch on/off Secondary Video (Picture-in-picture) (> 21)
Transmit the remote control signal
TV operation buttons (> 17)
You can operate the TV through the unit’s remote control.
[Í TV POWER] : Turn the television on and off
[INPUT] : Input select
[i j VOL] : Adjust the volume
[W X CH] : Channel select
Adjust the volume of an amplifier/receiver.
Select audio (> 19)
Displays the Home screen of the VIERA CAST (> 25)
Exit the menu screen
Show Pop-up menu (> 19)
Show Functions menu (> 18)
Return to previous screen
Select drive (BD/DVD/CD, SD card or USB device)
(> 18)
Show Playback menu (> 28)

4 5

Pull to flip down
the front panel.

7 8
1

2
3

9 10 11

POWER button (POWER Í/I) (> 14)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Disc tray (> 18)
Display

Disc indicator SD card indicator USB device indicator
The indicator blinks when reading data from a disc, a card
or a USB device, or writing data to a card.
V.OFF LED (Video off LED)
≥ It is possible to set the LED to turn on/off. (> 31)

Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and right
6 Open or close the disc tray (> 18)
7 SD Card LED
≥ It is possible to set the LED to turn on/off. (> 31)
8 SD card slot (> 18)
9 USB port (> 18)
10 Stop (> 19)
11 Start play (> 19)
Rear panel terminals (> 8–14)

VQT2J87(ENG)

Getting started

Control reference guide

DMP-BDT300_VQT2J87_eng.book 6 ページ

２０１０年１月１８日

月曜日

午後５時２７分

Playable discs/Cards/USB devices
Type

Logo examples

Type detail
BD-Video

Video

BD-RE

Video
JPEG

BD-R

Video
DivX®

DVD-Video

Video

DVD-RAM

Video
AVCHD
JPEG

DVD-R

DVD
DVD-R DL

DVD-RW
—

CD
—

Playable contents

Video
AVCHD
DivX
MP3
JPEG

Video
AVCHD

+R/+RW/+R DL
Music CD

Music [CD-DA]

CD-R
CD-RW

DivX
Music [CD-DA]
MP3
JPEG

SD Memory Card (8 MB to 2 GB)
(Includes miniSD Card and microSD Card)

SDHC Memory Card (4 GB to 32 GB)

(Includes microSDHC Card)

SDXC Memory Card (48 GB, 64 GB)

MPEG2
AVCHD
JPEG

(Includes microSDXC Card)

USB

VQT2J87(ENG)

—

USB devices
(up to 128 GB)

DivX
MP3
JPEG

２０１０年１月１８日

月曜日

午後５時２７分

∫ Discs that cannot be played in this unit

∫ SD card

Any other disc that is not specifically supported or
previously described.

≥ MiniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used, but
must be used with an adaptor card. These are
usually supplied with such cards, or otherwise
customer provided.
≥ Keep the Memory Card out of reach of children
to prevent swallowing.
≥ To protect the card’s contents, move the record prevention
tab (on the SD card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format (Does not support
long file name.) and SDXC Memory Cards in exFAT.
≥ If the SD card is used with incompatible computers or
devices, recorded contents may be erased due to the card
being formatted etc.
≥ Useable memory may be slightly less than the card
capacity.

≥ 2.6 GB and 5.2 GB DVD-RAM
≥ DVD-RAM that cannot be removed from cartridge
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ PAL discs
≥ HD DVD
≥ BD-Video discs recorded at a rate of 50 fields/sec

∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the
region code A.
Example:

∫ USB device

DVD-Video
This unit plays DVD-Video marked with labels containing the
region number “1” or “ALL”.
Example:

ALL

1
2

≥ This unit supports connecting a USB memory, digital
camera and video camera produced by Panasonic, etc. It is
not warranted that all USB devices will work with this unit.
≥ This unit does not support USB device charging.
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 High Speed.

≥ It may not be possible to play the above media in some cases due to the
type of media, the condition of the recording, the recording method and
how the files were created.
≥ The producers of the disc can control how discs are played, so you may
not always be able to control play as described in these operating
instructions. Read the disc’s instructions carefully.

∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by
a recorder, etc. needs to be finalized by the recorder to play
on this unit. Please refer to the recorder’s instructions.

∫ BD-Video
≥ 3D videos can be played back when this unit is connected
to a 3D compatible TV using an HDMI cable.
≥ This unit supports high bit rate audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) adopted in BD-Video. In order to
enjoy these audio formats, refer to page 38.

∫ Music CD
≥ Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
≥ The digital audio content side of a DualDisc does not meet
the technical specifications of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.

VQT2J87(ENG)

Getting started

DMP-BDT300_VQT2J87_eng.book 7 ページ

DMP-BDT300_VQT2J87_eng.book 8 ページ

２０１０年１月１８日

月曜日

午後５時２７分

STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you temporarily
disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder. Due
to copy guard protection the picture may not be displayed
properly.
≥ Refer to page 39, about recommended settings for each
piece of connected equipment.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft) or less.
Recommended part number:
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.

Highest Quality
(VIDEO)

∫ Via an HDMI MAIN AV OUT terminal
– It is possible to playback 3D videos by connecting this
unit with a 3D compatible TV.

HDMI IN

HDMI cable

≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
(> 32).
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” (> 27).

VQT2J87(ENG)

DMP-BDT300_VQT2J87_eng.book 9 ページ

２０１０年１月１８日

月曜日

午後５時２７分

Standard Quality
(VIDEO)

AUDIO IN
R
L

Audio/Video
cable
(included)

COMPONENT VIDEO IN

Component
Video cable

≥ Connect terminals of the same color.
≥ Set “Component Video Resolution” to “480p”, “720p” or
“1080i” (> 32).
≥ Set “HDMI Video Mode” to “Off” (> 32).

∫ Via a VIDEO OUT terminal

Connections & Settings

∫ Via a COMPONENT VIDEO OUT terminal

AUDIO IN
R
L VIDEO IN

Audio/Video
cable (included)

≥ Connect terminals of the same color.

VQT2J87(ENG)

VQT2J87~Body_eng.fm 10 ページ

２０１０年１月２６日

火曜日

午後２時４１分

STEP 2 : Connecting to an amplifier/receiver
Digital Audio
∫ Via an HDMI MAIN AV OUT terminal
– It is possible to playback 3D videos when the connected
TV and amplifier/receiver are 3D compatible.

∫ Via an HDMI MAIN AV OUT and HDMI SUB AV
OUT terminal
– It is possible to playback 3D videos when the connected
TV is 3D compatible, even if the amplifier/receiver is not
3D compatible.

HDMI IN

HDMI cable
Multi channel
speakers

Multi channel
speakers

Amplifier/receiver

Amplifier/receiver
HDMI IN

HDMI IN

HDMI cable

≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
(> 32).
≥ Set “Digital Audio Output” depending on the connected
amplifier/receiver (> 31).
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” (> 27).

VQT2J87(ENG)

HDMI cable

≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
(> 32).
≥ Set “HDMI(SUB) Output Mode” to “V.OFF”. (> 23)
– Audio is output in high resolution regardless of
compatibility of the amplifier/receiver with 3D.
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” (> 27).
The HDMI SUB AV OUT terminal is not compatible with the
VIERA Link “HDAVI Control”.

DMP-BDT300_VQT2J87_eng.book 11 ページ

２０１０年１月１８日

月曜日

午後５時２７分

Analog Audio
∫ Via a COAXIAL or OPTICAL terminal

∫ Via a 5.1/7.1ch AUDIO OUT terminal

Multi channel speakers

Connections & Settings

Amplifier/receiver

COAXIAL IN

Coaxial
cable

Connect Audio cables to
terminals corresponding
to the speakers you have
connected.

OPTICAL IN

Optical
cable



≥ When connecting a TV (> 8) with HDMI AV OUT terminal,
set “HDMI Audio Output” to “Off” (> 32).
≥ Set “Digital Audio Output” depending on the used terminal
and connected amplifier/receiver (> 31).

 



Cable connections
a Front speaker (L/R)
b Surround speaker (L/R)
c Subwoofer
d Center speaker
e Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
≥ Set the “Analog Audio Output” to “7.1ch” or “2ch (Downmix)
+ 5.1ch”, depending on the used terminal (> 32).
≥ You can set the “Analog Audio Output” from the easy setting
(> 14).
≥ When connecting equipment with HDMI AV OUT terminal,
set “HDMI Audio Output” to “Off” (> 32).

VQT2J87(ENG)

DMP-BDT300_VQT2J87_eng.book 12 ページ

２０１０年１月２１日

木曜日

午後８時９分

STEP 3 : Connecting to a broadband network
The following services can be used when this unit is
connected to broadband.
≥ Firmware can be updated (> 17)
≥ You can enjoy BD-Live (> 21)
≥ You can enjoy VIERA CAST (> 25)
≥ [BDT350] : DLNA feature (> 26)

For details about connection method, refer to the instructions
supplied with the connected equipment.
≥ The unit is not compatible with public wireless LAN services
provided in airports, stations, cafes etc.

∫ Using LAN (ethernet) cable

∫ Using Wireless LAN Adaptor (DY-WL10)

Wireless LAN Adaptor
(included)

LAN Cable
Broadband router, etc.

Wireless router
(Access point), etc.

LAN Cable

Modem (Broadband)
*Provided by ISP

[BDT350]

DLNA Certified media
server
(Refer to page 26 for more
information.)

≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Inserting any cable other than a LAN cable in the LAN terminal
can damage the unit.

VQT2J87(ENG)

LAN Cable

Modem (Broadband)
*Provided by ISP

[BDT350]

DLNA Certified media
server
(Refer to page 26 for
more information.)

≥ Wireless LAN Adaptors other than the included Wireless
LAN Adaptor cannot be used.
≥ When connection conditions are poor, use the included
USB extension cable to connect the Wireless LAN Adaptor
provided with this unit.
≥ Do not use any other USB extension cables except the
supplied one.
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
For additional information about this unit refer to
http://www.panasonic.com/consumer/support

２０１０年１月２６日

Precautions of Wireless LAN Adaptor
The following limits are in place regarding the usage of this device. You must be
aware of these limits before using this device.
Panasonic will in no way be responsible for any incidental damage which
may arise due to a failure to obey these limits, or to any condition of use or
disuse of this device.
≥ Do not use this device to connect to any wireless network for which
you do not have usage rights.
During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access.
* An SSID (Service Set IDentification) is a name used by wireless LAN to
identify a particular network. Transmission is possible if the SSID
matches for both devices.
≥ Data transmitted and received over radio waves may be intercepted
and monitored.
≥ This wireless LAN adaptor contains delicate electronic components.
Please use this adaptor in the manner in which it was intended and
follow the following points:
– Do not expose the adaptor to high temperatures or direct sunlight.
– Do not bend, or subject the adaptor to strong impacts.
– Keep the adaptor away from moisture.
– Do not disassemble or alter the adaptor in any way.
– Do not attempt to install the adaptor in any incompatible device.
Wireless LAN Adaptor is prohibited from export or bringing into nations*
upon which the United States place embargoes.
Wireless LAN Adaptor is subject to Export Administration Regulations
(EAR) due to the installation of encryption device made in the United
States. (Current as of November 2009)
* Cuba, Iran, Syria, North Korea, Sudan etc.

火曜日

午後１時５２分

THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired
operation of this device.
This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to
5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency
range 5.15 to 5.25 GHz to reduce the potential for harmful interference to
co-channel Mobile Satellite systems. High power radars are allocated as
primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These
radar stations can cause interference with and/or damage this product.
The available scientific evidence does not show that any health problems
are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are
absolutely safe.
Low power Wireless devices emit low levels of radio frequency energy
(RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue),
exposure to low-level RF that does not produce heating effects causes no
known adverse health effects.
Many studies of low-level RF exposures have not found any biological
effects. Some studies have suggested that some biological effects might
occur, but such findings have not been confirmed by additional research.
Wireless LAN adaptor (DY-WL10) has been tested and found to comply
with FCC/IC radiation exposure limits set forth for an uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines
in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)
Exposure rules.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded
interface cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables may result in interference
to radio and TV reception. Any changes or modifications not approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)

THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
Product Identification Marking is located on the bottom of unit.

VQT2J87(ENG)

Connections & Settings

DMP-BDT300_VQT2J87_eng.book 13 ページ

DMP-BDT300_VQT2J87_eng.book 14 ページ

２０１０年１月１８日

月曜日

STEP 4 : Connecting to
an AC power

午後５時２７分

STEP 5 : Setting
Easy Setting
After connecting your new player for the 1st time and pressing
the power button, a screen for the basic settings will appear.

Preparation
Turn on the television and select the appropriate video
input on the television.

1
AC power supply cord
(included)

To a household AC outlet
≥ This unit consumes a small amount of AC power (“Quick
Start”: “Off”, approx. 0.1 W) even when turned off. In the
interest of power conservation, if you will not be using this
unit for an extended period of time, it can be disconnected.
The unit should be installed near an accessible AC power
outlet, with the power cord connected directly to it.
To completely disconnect power from the unit, unplug the
power cord from the AC power outlet.

Press [Í POWER].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then the setting information on the TV is acquired by this
TV.

Follow the on-screen instructions and
make the settings with [3, 4] and press
[OK].

After completing “Easy Setting”, you can perform “Network
Easy Setting”.

≥ You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. (> 33)
≥ Initial setting is set to “2ch (Downmix) + 5.1ch”, so you will need to select
“7.1ch” if using the 7.1ch output.
Analog Audio Output
Set unit’s analog audio output.
Select only “7.1ch” to enjoy audio from a
receiver through 7.1ch analog connections.
Otherwise, select “2ch (Downmix) + 5.1ch.”

2ch (Downmix) + 5.1ch
7.1ch
OK
RETURN

VQT2J87(ENG)

DMP-BDT300_VQT2J87_eng.book 15 ページ

２０１０年１月１８日

Network Easy Setting
After completing “Easy Setting”, you can continuously perform
“Network Easy Setting”.

月曜日

午後５時２７分

When you experience
problems with settings
Access Point Connection Setting

Select “Wired” or “Wireless” and press
[OK].

Access Point Connection Setting
Failed to connect to the access point.
A conflict with another device occurred.
Do you want to configure Access Point Connection
Setting again ?

Network Easy Setting (Connection Test)
Select a connection mode.
Current setting
: Wired

Wireless LAN connection:
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select “Wireless”.

Yes

Wired

Display

Wireless
OK
RETURN

A conflict with another
device occurred.

If “Wireless LAN Adaptor is not connected.” is displayed,
check that the Wireless LAN Adaptor is fully inserted.
Alternatively, disconnect and reconnect it. If there is still no
change in the display, consult your dealer.

Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].

For wireless LAN connection:
If you are using a Wireless router (Access point) that supports
WPS, you can easily perform the settings by selecting “WPS
(PUSH button method)”.
Otherwise, perform the settings by selecting “Search for
access point” or “Manual setting” in “Other methods”.
Access Point Connection Setting
Select a connection method to use with an access point
of Wireless LAN.
Please refer to the operating instructions of the access
point about connection methods.

Check the following
≥ Please wait a few moments,
and then try again.

≥ Setting of the Wireless router
(Access point) for MAC Address
etc.
A time out error occurred.
≥ The signal may be weak. Using
the included USB extension
cable, adjust the position of the
Wireless LAN Adaptor. Do not
use any other USB extension
cables except the supplied one.
An authentication error or ≥ The SSID and the encryption
a time out error occurred.
key of the Wireless router
(Access point).
≥ Please wait a few moments,
and then try again.

A device error occurred.

≥ Connection of Wireless LAN
Adaptor
If there is no improvement in
symptom, contact our Customer
Service Center.

WPS (PUSH button method)
Other methods

p
OK
RETURN

Search for access point
WPS (PIN code method)
Manual setting

≥ WPS (Wi-Fi Protected Setup) is a function that facilitates
settings relating to the connection and security of wireless
LAN devices. To see whether your Wireless router (Access
point) supports WPS, check the Wireless router operating
instructions.

VQT2J87(ENG)

Connections & Settings

LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.

DMP-BDT300_VQT2J87_eng.book 16 ページ

２０１０年１月１８日

月曜日

午後５時２７分

Network Easy Setting (Connection Check)
Network Easy Setting (Connection Check)
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway

≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (> 33)
≥ You can redo these settings individually using “Network Settings”. (> 33)
≥ After performing network settings on this unit, the settings (encryption
level, etc.) of the Wireless router (Access point) might change. When you
have trouble getting online on your PC, perform the network settings on
your PC in accordance with the settings of Wireless router (Access point).

: Fail
: Fail
: Fail

LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.

Yes

Check the
following

Display
1. LAN cable connection or
Connection to access point

: Fail

2. IP address setting

: Fail

3. Connection to gateway

: Fail

1. LAN cable connection or
Connection to access point

: Pass

2. IP address setting

: Fail

3. Connection to gateway

: Fail

[BDT350]
1. LAN cable connection or
Connection to access point

:Pass

2. IP address setting

:Home
network
available

3. Connection to gateway

:Fail

1. LAN cable connection or
Connection to access point

: Pass

2. IP address setting

: Pass

3. Connection to gateway

: Fail

≥ Connection of
the LAN
cables (> 12)

≥ Connection
and settings
of the hub and
router
≥ Settings of “IP
Address/DNS
Settings”
(> 33)

Network Easy Setting (Internet Connection Check)
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet

: Fail(Error code: B019)

Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].

Display

Check the following

≥ “Primary DNS” and “Secondary
Cannot find the server.
DNS” settings of “IP Address/
(Error code: B019)
DNS Settings” (> 33)
≥ The server may be busy or the
service may have been
Failed to connect to the
suspended. Please wait a few
server.
moments, and then try again.
(Error code: B020)
≥ Settings of “Proxy Server
Settings” (> 33) and the router

VQT2J87(ENG)

２０１０年１月２６日

Firmware updates
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature operates.
These updates are available free of charge.

This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following
screen is displayed.
Firmware Update
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/

Yes

No
OK

火曜日

午後１時５２分

STEP 6 :
Reprogramming the
remote control
For other Panasonic products
Change “Remote Control Code” (> 33) on the main unit and
the remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.

For TV or amplifier/receiver
You can operate the TV or amplifier/receiver using the unit’s
remote control.

RETURN

Input the code (> 42) with the number
buttons while pressing [Í TV POWER].

DO NOT DISCONNECT the unit from the AC power or
perform any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on
the unit’s display. Unit will restart and the following screen will
be displayed.
The firmware was updated.
Current Installed Version: x.xx
OK
RETURN

≥ You can perform updates anytime by selecting “Firmware Update” in the
Setup menu. (> 33)
≥ If downloading on this unit fails or this unit is not connected to the
Internet, then you can download the latest firmware from the
following website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (>33, “System
Information”)
≥ Downloading will require several minutes. It may take longer or the
Internet may not be connected depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic
Update Check” to “Off”. (> 33)

For televisions

For amplifiers/receivers
Input the code (> 42)

with the number
buttons while pressing
[RECEIVER j VOL].

e.g., 0001: [0] B [0] B [0] B [1]

Test by turning on the television or
adjusting the volume of the amplifier/
receiver.

≥ If your television or amplifier/receiver brand has more than one code
listed, select the one that allows correct operation.

VQT2J87(ENG)

Connections & Settings

DMP-BDT300_VQT2J87_eng.book 17 ページ

DMP-BDT300_VQT2J87_eng.book 18 ページ

２０１０年１月２１日

木曜日

Inserting or removing
media
Playback

午後８時９分

FUNCTIONS menu
Major functions of this unit can be operated from the
FUNCTIONS menu.
Press [3, 4] to select the item and press [OK].
Blu-ray Disc Player
FUNCTIONS
BD-Video

Playback
Top Menu

Network
SD Card

≥ When inserting a media item, ensure that it is facing the
right way up.
≥ When the indicator on this unit's display blinks, do not turn
off the unit or remove the media. Such action may result in
loss of the media’s contents.
≥ When removing the SD card, press on the center of the card
and pull it straight out.
≥ If you connect a Panasonic product with a USB connection
cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the
connected equipment.

∫ To switch drives
Press [DRIVE SELECT] to select “BD/DVD/CD”, “SD card”
or “USB device”.
≥ If media is inserted while the unit is stopped, the drive
switches automatically depending on the inserted media.

USB device
Other Functions
OK
RETURN

Playback

Play back the contents.

Top Menu

(> 19)

Viewing Picture

(> 24)

Viewing Video

(> 19)

Listening Music

(> 25)

[BDT300]
Network

Displays the Home screen of
the VIERA CAST (> 25)

[BDT350]
Network

Home
Network
(DLNA)

(> 26)

Internet
Content

Displays the Home screen of
the VIERA CAST (> 25)

BD/DVD/CD
SD Card

Switches to each drive.

USB device

Other
Functions

Playlists

You can play playlists created
on DVD-VR.

Setup

(> 30)

Card
Management

(> 21)

To exit the screen
Press [FUNCTION MENU].

≥ Items to be displayed may vary with the media.
≥ If FUNCTIONS screen is not displayed, press [FUNCTION MENU].

VQT2J87(ENG)

DMP-BDT300_VQT2J87_eng.book 19 ページ

２０１０年１月２６日

Playing video contents
BD DVD CD
Preparation

Press [Í POWER] to turn on the unit.
Insert the media.
Play starts.
≥ If the menu is displayed, press [3, 4, 2, 1] to select
the item and press [OK].
≥ When a message screen is displayed while playing
back 3D compatible video software, play back in
accordance with the instructions.
≥ If play does not start, press [1] (PLAY).

Stop
Press [∫].
The stopped position is memorized.

Press [;].
≥ Press [;] again or [1] (PLAY) to restart play.

Search/Slow-motion
Search
While playing, press [6] or [5].
≥ Music and MP3: The speed is fixed to a single step.

While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
information displayed will change.
e.g.BD-Video
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
BD-Video

0:20.52

The speed increases up to 5 steps.
≥ Press [1] (PLAY) to revert to normal playback speed.

Skip
While playing or paused, press [:] or [9].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.

∫ To show the status messages

0:05.14

Playback

You can show Top Menu, Direct Navigator or Pop-up Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP
MENU].
≥ Press [3, 4, 2, 1] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [SUB MENU] and
selecting “Pop-up Menu”.

Current position

Pause

Slow-motion
While paused, press [6] or [5].
≥ BD-Video and AVCHD: Forward direction [5] only.

∫ To show menus

Other operations during play

Resume play function
Press [1] (PLAY) to restart from this position.
≥ The position is cleared if the tray is opened or you press [∫]
several times to display “STOP” on the unit’s display.
≥ On BD-Video discs including BD-J (> 45), the resume
play function does not work.

 T1

午後１時５２分

These functions may not work depending on the media and
contents.

USB

Turn on the television and select the appropriate video input
on the television.

1
2

火曜日

Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward or
backward.
≥ Press [1] (PLAY) to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [1] (;1) only.

Play

Total time

≥ Depending on media and contents, the display may change or may not
appear.
≥ DivX: Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have
been dragged and dropped, copied and pasted to the media.

Changing audio
Press [AUDIO].
You can change the audio channel number or soundtrack
language (> 28), etc.

VQT2J87(ENG)

DMP-BDT300_VQT2J87_eng.book 20 ページ

２０１０年１月２１日

木曜日

Useful functions

1
2

Press [SUB MENU].
Select an item, then press [OK].

While Direct Navigator screen is displayed
Properties

To display the titles properties (recording
date, etc.).

View
Chapters

To select the chapter.

To picture

Playing still pictures (> 24).

Select
Folder

To switch to another folder.

While playing
Screen
Aspect

When black bars are shown at the top,
bottom, left, and right sides of the screen, you
can enlarge the image to fill the screen.

Top Menu

To display Top Menu.

Pop-up
Menu

To display Pop-up Menu.

To display Menu.

≥ Depending on the played contents if you perform “Screen
Aspect”, there may be no effect.
≥ When “TV Aspect” (> 32) is set to “4:3 Pan & Scan” or “4:3
Letterbox”, the “Zoom” effect in “Screen Aspect” is disabled.

≥ Depending on the media and contents, displayed items are different.

VQT2J87(ENG)

午後８時９分

DMP-BDT300_VQT2J87_eng.book 21 ページ

２０１０年１月１８日

月曜日

午後５時２７分

Enjoying BD-Live or
BONUSVIEW in BD-Video
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as
picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you
to enjoy more functions such as subtitles, exclusive images
and online games by connecting this unit to the Internet.
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.

Enjoying BD-Live discs with
Internet
Some BD-Live content available on the Blu-ray discs may
require an Internet account to be created in order to access
the BD-Live content. Follow the screen display or instruction
manual of the disc for information on acquiring an account.

1
2

Connect to the network. (> 12)
Insert an SD card (with 1 GB or more free space).
SD card is used as the local storage (> 45).

Insert the disc.

Playing picture-in-picture
∫ Deleting data/Formatting SD cards

Press [PIP].
Secondary video

Insert an SD card.
Press [FUNCTION MENU].
Press [3, 4] to select “Other Functions” and press [OK].
Press [3, 4] to select “Card Management” and press
[OK].
5 Press [3, 4] to select “BD-Video Data Erase” or “Format
SD Card” and press [OK].

1
2
3
4

Card Management
SD card

No. of Files 6
Free space 300 MB

Playback

To turn on/off secondary video

BD-Video Data Erase
Format SD Card

Primary video
To turn on/off secondary audio
[DISPLAY] > select “Disc” > [1] >

select
“Signal Type” > [OK] > set “Soundtrack” in
“Secondary Video” to “On” or “Off”

≥ During search/slow-motion or frame-by-frame, only the primary video is
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”,
secondary audio will not be played (> 31).

OK
RETURN

Format this SD Card.

6 Press [2, 1] to select “Yes” and press [OK].
7 Press [2, 1] to select “Start” and press [OK].

≥ To use the above functions, it is recommended that you format the card on
this unit. If the SD card you use is formatted, all data on the card will be
erased. It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs
(> 30).
≥ When discs supporting BD-Live are played back, the player or disc IDs
may be sent to the content provider via the Internet.

VQT2J87(ENG)

DMP-BDT300_VQT2J87_eng.book 22 ページ

２０１０年１月２１日

木曜日

∫ Displaying subtitle text

Regarding DivX
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is an
official DivX Certified device that plays DivX video. Visit
www.divx.com for more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play
DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD
section in the device setup menu.
Go to vod.divx.com with this code to complete the registration
process and learn more about DivX VOD.
≥ It is not possible to playback DivX VOD content recorded on
the USB device.
Display the unit’s registration code.
(> 33, “DivX Registration” in “Others”)
DivX Registration
The registration code is necessary to
register this unit to play protected
DivX videos.
Registration Code: XXXXXXXXXX
Please register at www.divx.com/vod/

10 alphanumeric
characters

≥ After playing DivX VOD content for the first time, the
registration code is not displayed.
≥ If you purchase DivX VOD content using a registration code
different from this unit’s code, you will not be able to play
this content. (“Authorization Error” is displayed.)
Cancel the unit’s registration.
(> 33, “DivX Registration” in “Others”)
Press [2, 1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in
www.divx.com.
Regarding DivX VOD content that can only be played a
set number of times
Some DivX VOD contents can only be played a set number of
times. When you play this content, the number of times
already played and initially playable number of times is
displayed.
≥ The remaining number of plays decreases each time a
program is played. However, when playing from the point
where play was previously stopped, the remaining number
of plays does not decrease due to the resume play function.

VQT2J87(ENG)

午後８時９分

You can display subtitle text on the DivX video disc with this
unit. This function has no relation to the subtitles specified in
DivX standard specifications and has no clear standard. The
operation might be different or it may not operate properly
depending on the way the file was made or the state of this
unit (playing, stopped, etc.).
Set “Subtitle” in “Disc” (> 28)

≥ DivX video files that do not display “Text” do not contain subtitle text.
≥ If the subtitle text is not displayed correctly, try changing the language
settings. (> 30)

VQT2J87~Body_eng.fm 23 ページ

２０１０年１月２６日

火曜日

午後２時４１分

Enjoying 3D video
BD
You can enjoy powerful videos with realistic sensations of the
3D compatible video software by connecting this unit with an
HDMI cable to a 3D compatible TV.

≥ Please refrain from viewing 3D images if you do not feel well or are to
view 3D images safely and comfortably.
In the event that you experience dizziness, nausea, or other discomfort
while viewing 3D images, discontinue use and rest your eyes.
≥ 3D images may not output as settings of “HDMI Resolution“ and “24p
Output“. (> 32)

Preparation
Connect 3D compatible TV to an HDMI MAIN AV OUT
terminal of this unit using an HDMI cable. (> 8, 10)
≥ Perform the necessary preparations for the TV.
Method of playback is the same as normal disc playback.
(> 19)

Playback

3D settings
Perform the following settings as necessary.
Playback Method You can play back 3D videos as 2D
for 3D Disc
(normal) videos. (> 30)

3D Type

If you cannot playback in 3D, change
the settings as required by the
connected TV format. (> 32)
≥ Change the settings for 3D on the TV
also when “Checker board” and “Side
by side” are selected.

HDMI(SUB)
Output Mode

If the amplifier/receiver is connected to
the HDMI SUB AV OUT terminal (> 10),
set to “V.OFF”. (> 32)
≥ HDMI (SUB) V.OFF LED on this unit
will light. (> 31)

3D Playback
Precautions

Hide the 3D viewing warning screen.
(> 30)

Pop-Out Level

Adjust the pop-up position for the
Playback menu or message screen etc.
(> 29)

VQT2J87(ENG)

DMP-BDT300_VQT2J87_eng.book 24 ページ

２０１０年１月２１日

木曜日

午後８時９分

Playing still pictures
BD DVD CD

USB

(BD-RE, DVD-RAM/-R/-R DL, CD-R/RW, SD Card,
USB device)

Insert a disc, SD card or USB device.
If the menu is displayed, press [3, 4] to select the item
and press [OK].

Useful functions

1
2

Press [SUB MENU].
Select an item, then press [OK].

While “Album View” or “Picture View” screen is displayed
Start
Slideshow

BD-RE, DVD-RAM
Press [3, 4, 2, 1] to select the album
and press [OK].
Album View

DIRECT NAVIGATOR
DVD-RAM(VR)

Picture

Video

Slideshow
Settings
2006 9 12
Total 13

106_DVD
Total 8



R Video
OK
RETURN

SUB
MENU



G Picture



Slideshow

Page 02/02

Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Soundtrack
The MP3 that is recorded on the USB device
or the music CD can be played back as
Background Music during the slideshow.
Soundtrack Folder
A folder to play back can be selected when a
USB device with recorded MP3 is connected
to this unit.

Press [3, 4, 2, 1] to select “Set” and
press [OK].

Press [OK] to go to Picture View.

Press [3, 4, 2, 1] to select the still
picture and press [OK].
DIRECT NAVIGATOR
DVD-RAM(VR)

You can display still pictures one by one at a
constant interval.

Picture View
Video

Picture

Select Root
folder

To switch to another higher folder.
≥ Only if there is a multiple number of higher
folders recognizable.

Select
Folder

To select the still pictures in another folder.

2006 9 12
0001

0002

0003

0004

To Video

Playing video contents (> 19).

0005

0006

0007

0008

To album
view

To display album view.

0009

While playing (except for slideshow)
Page 001/001
SUB
MENU

Play
RETURN

Rotate Right
Rotate Left

Press [2, 1] to display the previous or next still picture.
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].

Rotate the still picture.

Zoom out

Reduce the still picture.
≥ This function is only available for
small-sized still pictures.

Zoom in

Cancel “Zoom out”.

∫ To show the picture properties
While playing, press [STATUS] twice.
e.g. JPEG on DVD-RAM
Shooting date

Photo 11/12/2007

To exit the screen
Press [STATUS].

VQT2J87(ENG)

Total

3/9

≥ Depending on the media and contents, displayed items are different.
≥ When a still picture with large number of pixels is played, the display
interval may become longer. Even if the setting is changed, the display
interval may not become shorter.
≥ When both the music CD and the USB device with recorded MP3 is
inserted into this unit, the music CD has priority to be played back as
Background Music.

DMP-BDT300_VQT2J87_eng.book 25 ページ

２０１０年１月２１日

Playing music
(DVD-R/-R DL, music CD, CD-R/RW, USB device)

Insert a disc or USB device.
If the menu is displayed, press [3, 4] to select the item
and press [OK].

Press [3, 4] to select the track and press
[OK].
DIRECT NAVIGATOR
CD
No.
01
02
03
04
05

0.09
Track1
5 Tracks / Total Play Time 20min54sec

Music list

Track Name
Track1
Track2
Track3
Track4
Track5

午後８時９分

Enjoying VIERA CASTTM

DVD CD USB

木曜日

4.30

Play Time
4min30sec
3min41sec
4min30sec
3min11sec
5min 2sec

You can access a selection of Internet services from the
Home screen with VIERA CAST, for example YouTube,
Picasa Web Albums. (Current as of December 2009)

Preparation
≥ Network connection (> 12)
≥ Network setting (> 15)

Press [VIERA CAST].
Message is displayed. Please read these instructions
carefully and then press [OK].

Press [3, 4, 2, 1] to select the item and
press [OK].
Operable buttons:
[3, 4, 2, 1], [OK], [RETURN], colored buttons, number
buttons

VIERA CAST Home screen;
Play
RETURN

“

Settings

” indicates the track currently playing.

New York, NY

Weather

28°

W 17

COMING SOON

mph

Featured Photos

Featured Videos

COMING
SOON

∫ Playing a track in another folder

While the “Music list” is displayed

Press [SUB MENU].

Press [3, 4] to select “Select Folder” and
press [OK].

≥ You cannot select folders that contain no compatible tracks.

XXXXXX
Top TV Show
XXXXXX

Bloomberg
TELEVISION
XXX
XXX
XXX

15min. delay

7465.95
-89.68
778.94 -9.47998
1442.82
-25.15

Playback

Top Movie Rental

Images are for illustration purposes, contents may
change without notice.
To return to VIERA CAST Home screen
Press [VIERA CAST].
To exit from VIERA CAST
Press [EXIT], [FUNCTION MENU] or [TOP MENU/DIRECT
NAVIGATOR].

≥ In the following cases, settings are possible using “Internet Content
Settings” (> 33)
– When restricting the use of VIERA CAST.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be displayed
correctly. A high-speed Internet service with a speed of at least 6 Mbps is
recommended.
≥ Be sure to update the firmware when a firmware update notice is
displayed on the screen. If the firmware is not updated, you will not be
able to use the VIERA CASTTM function. (> 17)
≥ VIERA CASTTM home screen is subject to change without notice.
≥ The services through VIERA CASTTM are operated by their respective
service providers, and service may be discontinued either temporarily or
permanently without notice. Therefore, Panasonic will make no warranty
for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be
presented in specific languages.

VQT2J87(ENG)

VQT2J87~Body_eng.fm 26 ページ

２０１０年１月２６日

DLNA feature

火曜日

午後９時３３分

[BDT350]

You can enjoy viewing video and pictures saved on a DLNA
Certified media server (such as a PC with Windows 7 installed
etc.) connected to the home network with this unit.
≥For the operation of equipment connected to the network,
refer to their respective operating instructions.

Preparation
1 Perform network connection (> 12) and network setting
(> 15).
2 Connect a DLNA Certified media server to the network.

Viewing of video and pictures
on the equipment connected to
this unit via the network

≥ Discs or music cannot be played back. Also, depending on the equipment,
playback of pictures may not be possible.
≥ Items displayed in gray on the display cannot be played back by this unit.
≥ This unit cannot be played back via connected equipment.
≥ Depending on the performance of the connected PC, video frames may
be dropped during playback, or video may not playback at all.

Useful functions for when
playing back pictures
The following operations are possible when playing back
pictures from connected equipment.
While contents list is displayed
1 Press [SUB MENU].
2 Select an item, then press [OK].
Start
Slideshow

1 Press [FUNCTION MENU].
2 Press [3, 4] to select “Network” and
press [OK].

Slideshow
Settings

e.g.

While playing
1 Press [SUB MENU].
2 Select an item, then press [OK].
Status
Rotate Right
(except for
slideshow)

Home Network (DLNA)

XXXXXX

Rotate Left
(except for
slideshow)

OK
RETURN

Servers found on the network are displayed.
Please select one.

Update

4 Press [3, 4] to select the equipment to
playback the contents, and press [OK].
5 Press [3, 4, 2, 1] to select the item to
playback (folder), and press [OK].
≥ Menu structure will be different depending on the
equipment connected to this unit. Select the contents by
repeating the operation.
≥ Control Panel is displayed once the playback starts.
Operation can be performed with [3, 4, 2, 1], [OK]
and [EXIT].
Control Panel
e.g.
Exit

≥ Press [OK] if the Control Panel is not displayed.
≥ Press [RETURN] to hide the Control Panel.

VQT2J87(ENG)

Display Interval
Change the display interval.
Repeat Play
Repeat slideshow.
Press [3, 4, 2, 1] to select “Set” and
press [OK].

3 Press [3, 4] to select “Home Network
(DLNA)” and press [OK].
≥ A list of equipment connected via the network is
displayed.
≥ This list can be updated by pressing [R] on the remote
control.

You can display still pictures one by one at a
constant interval.

Show the picture properties (> 24).

Rotate the still picture.

２０１０年１月１８日

月曜日

午後５時２７分

Linked operations with
the TV

Easy control only with VIERA
remote control

(VIERA LinkTM “HDAVI ControlTM”)

What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) or amplifier/receiver under
“HDAVI Control”.
You can use this function by connecting the
equipment with an HDMI cable*. See the operating
instructions for connected equipment for operational
details.
* Only when connecting via an HDMI MAIN AV OUT terminal
on this unit.

Preparation
1 Set “VIERA Link” to “On” (> 32). (The default setting is
“On”.)
2 Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so
that the “HDAVI Control” function works properly.
Also when the connection or settings are changed,
repeat this procedure.

Automatic input switching
Power on link

Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the
“Control Panel” and display the Top Menu or Pop-up Menu,
etc.

1
2

Press [SUB MENU].

Control Panel

Select an item, then
press [OK].

Screen Aspect
Top Menu
Pop-up Menu
OK
RETURN

SUB
MENU

≥ The sub menu may not appear
while the Top Menu for BD-Video or DVD-Video is
displayed.

≥ The buttons that you can use for this unit vary depending on the TV. For
details, refer to the operating instructions of the TV.
≥ The operation of this unit may be interrupted when you press incompatible
buttons on the TV remote control.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2009)
for Panasonic’s HDAVI Control compatible equipment. This standard is
compatible with Panasonic’s conventional HDAVI equipment.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥ Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.

When the following operations are performed, the television
will automatically switch the input channel and display the
corresponding action. When the television is off, the television
will automatically turn on.
– When play starts on the unit
– When an action that uses the display screen is performed
(e.g., Direct Navigator screen)

Power off link
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch the
television off.
Playing music continuously even after turning off power
to the television
When the unit is connected to a Panasonic TV (VIERA) that
supports HDAVI Control 2 or later and an amplifier/receiver
supports VIERA Link.
1 While playing music
Press [SUB MENU].
2 Press [3, 4] to select “TV Power” and press [OK].

VQT2J87(ENG)

Playback

DMP-BDT300_VQT2J87_eng.book 27 ページ

DMP-BDT300_VQT2J87_eng.book 28 ページ

２０１０年１月２６日

火曜日

Playback menu

午後１時５２分

Settings

Disc
Signal Type

Press [DISPLAY].

Primary Video

e.g., BD-Video
Disc
Play
Video
Audio

Signal Type
Subtitle
Subtitle Style

Menus

2
3
4

Items

Off
-

Main

Angle

1ENG

Video

The recording method of original video
appears.

Soundtrack

Select the type of audio or language.

Settings

Secondary Video

Press [3, 4] to select the menu and press
[1].

Video

Select on/off of images. The recording
method of original video appears.

Soundtrack

Select on/off of audio and the language.

Press [3, 4, 2, 1] to select the item and
press [1].

Video

Press [3, 4] to select the setting.

Soundtrack

Some items can be changed by pressing [OK].

Show or change the soundtrack.

To exit the screen
Press [DISPLAY].
Depending on the condition of the unit (playing, stopped,
etc.) and media contents, there may be some items that
you cannot select or change.
Regarding Language, Audio attribute and video attribute :
(> 42)

The recording method of original video appears.

Subtitle
Turn the subtitle on/off, and change the language depending
on the media.

Subtitle Style
Select the subtitle style.

Audio channel
Select the audio channel number.
(>19, “Changing audio”)

Angle
Select the number of the angle.
Some items may be changed only on the disc specific menu.
(> 19)

VQT2J87(ENG)

DMP-BDT300_VQT2J87_eng.book 29 ページ

２０１０年１月２１日

Play
Repeat Play
(Only when the elapsed time is being displayed on the unit’s
display.)
Select the item which you want to repeat. The items displayed
differ depending on the type of media.
Select “Off” to cancel.

Random

木曜日

午後８時９分

Progressive
Select the method of conversion for progressive output to suit
the type of material being played.
≥ When the content is distorted change the settings from
“Auto“ to “Video”.

24p
Movies and other material recorded on DVD-Video at 24p are
output at 24p.
≥ Only when you have selected “On” in “24p Output” (> 32).

Select whether or not to play random.

Playback Information Window

Audio

Displays the following.

Settings status of “Digital Audio Output” (> 31).
*&/+

HDMI output information.
(First: HDMI(MAIN), Second: HDMI(SUB))

Press [RETURN] to exit.

Pop-Out Level
(Only when “Full HD” is selected in “3D Type” (> 32).)
Pop-up position for the Playback menu or message screen
etc. can be adjusted.

Video
Picture
Select the picture quality mode during play.
≥ If you select “User”, you can make further adjustments.
Press [1] to select “Picture Adjustment” and press [OK].
≥ 3D NR:
Reduces the rough noise in the background to give a greater feeling of
depth.
When “24p Output” is set to “On”, this function may not operate. (> 32)
≥ Integrated NR:
Smoothes block noise and reduces the smudging that appears around
contrasting sections of the picture.

Advanced Settings

Sound Effects*1, *2
Select the sound effect.
≥ Digital Tube Sound :
This feature gives you warm sound, like that produced by a
vacuum tube amplifier.
≥ Re-master :
This feature gives you brighter sound by increasing the high
frequency portion of the audio. (Discs recorded at 48 kHz or
less)
Recommended setting

The high-resolution processing of HDMI chroma signals
produces a high-resolution picture with rich picture quality.

Pop and rock

Re-master 2

Jazz

Re-master 3

Classical

≥ Night Surround :
Enjoy a movie with powerful sound even when the volume is
kept low at night. The audio is set in such a way that it can
be heard easily.

Dialog Enhancer*2
The volume of the center channel is raised to make dialog
easier to hear.

High Clarity Sound
When connected to TV via the HDMI terminal for outputting
image, it produces clearer sound.
≥ Only when you have selected “Enable” in “High Clarity
Sound” (> 31).
*1
*2

Chroma Process

Re-master 1

Not every function can be set individually.
This function is effective for audio from the HDMI terminal or the
COAXIAL /OPTICAL terminal only when “Digital Audio Output” is set to
“PCM” (> 31). (However, in this case, audio is output as 2ch from the
COAXIAL /OPTICAL terminal.)

Detail Clarity
The picture is sharp and detailed.

Super Resolution
Pictures of normal image quality are corrected to sharp and
detailed images when output as 1080i/1080p from HDMI AV
OUT or COMPONENT VIDEO OUT.

VQT2J87(ENG)

Settings

Audio/video attribute information of disc.

DMP-BDT300_VQT2J87_eng.book 30 ページ

２０１０年１月２６日

火曜日

Setup menu
Change the unit’s settings if necessary. The settings remain
intact even if you switch the unit to standby.

While stopped

Press [SETUP].

午後１時５２分

Playback Method for 3D Disc
Select the playback method of 3D compatible video software.

3D Playback Precautions
Set to display or hide the 3D viewing warning screen when
playing back the 3D compatible video software.

Audio Language
Choose the language for audio.

Setup

≥ If “Original” is selected, the original language of each disc
will be selected.
≥ Enter a code (> 42) with the number buttons when you
select “Other ¢¢¢¢”.

Disc
Video
Audio
Display
TV / Device Connection

Subtitle Language

Network

Choose the language for the subtitle.

Others

≥ If “Automatic” is selected and the language selected for
“Audio Language” is not available, subtitles of that language
will automatically appear if available on that disc.
≥ Enter a code (> 42) with the number buttons when you
select “Other ¢¢¢¢”.

OK
RETURN

2
3

Press [3, 4] to select the menu and press
[OK].
Press [3, 4] to select the item and press
[OK].
If there are any other items, repeat these steps.

Press [3, 4, 2, 1] to select the option
and press [OK].

To exit the screen
Press [SETUP].
≥ There may be differences in operation methods. If this happens, follow the
on-screen instructions for the operation.

About the password
The password of the following items are common.
Don’t forget your password.
≥ “DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” (> 33)

Menu Language
Choose the language for the disc menus.
≥ Enter a code (> 42) with the number buttons when you
select “Other ¢¢¢¢”.

BD-Live Internet Access (> 21)
You can restrict Internet access when BD-Live functions are
used.
≥ If “Allow (Limited)” is selected, Internet access is permitted
only for BD-Live contents which have content owner
certificates.

DivX Subtitle Text
Select a suitable item according to the language used for DivX
subtitles text (> 22).
≥ This item is displayed only after playing back a file.

Video
Still Mode (paused video)
Select the type of picture shown when you pause playback.

Disc
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit password
with the number buttons when the password screen is
shown.

BD-Video Ratings
Set an age limit of BD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit password
with the number buttons when the password screen is
shown.

VQT2J87(ENG)

Auto

Automatically selects the type of picture shown.

Field

Select if jittering occurs when “Auto” is selected.

Frame

Select if small text or fine patterns cannot be seen
clearly when “Auto” is selected.

Seamless Play
The chapter segments in playlists are played seamlessly.
≥ Select “On”, when the picture freezes for a moment at the
chapters segment in playlists.

Black Level Control
Select lighter or darker for adjusting the black level control to
the desired setting for picture enhancement.

２０１０年１月２６日

火曜日

午後２時４１分

Audio
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.

Digital Audio Output (> 38)
Press [OK] to show the following settings:

Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD

High Clarity Sound
When connected to TV via the HDMI terminal for outputting
image, it produces clearer sound.
≥ Set to “Enable” and then set “High Clarity Sound” on the
Playback menu to “On”. (> 29)

Audio Delay
Mis-sync between the video and audio is corrected by
delaying the audio output.

Display

Select the audio signal to output.
≥ Select “PCM”, when the connected equipment cannot
decode the respective audio format.
≥ Not making the proper settings may result in noise.

Status Messages

BD-Video Secondary Audio

On-screen Language

Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (> 21)
≥ If “Off” is selected, the unit outputs the primary audio only.

Choose the language for menus and on-screen messages.

PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz for the PCM output from the DIGITAL AUDIO OUT.
≥ If “On” is selected, the signals that are converted to 48 kHz
are output.
≥ If “Off” is selected, and the connected equipment does not
support 96 kHz, the sound will not be output normally.
≥ Signals are converted to 48 kHz despite the settings in the
following cases:
– when the signals have a sampling frequency of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On”

Downmix
Select the downmix system of multi-channel to 2 channel
sound.
≥ Select “Surround encoded”, when the connected equipment
supports the virtual surround function.
≥ There is no effect on “Bitstream” via HDMI AV OUT and
DIGITAL AUDIO OUT.
≥ The audio will be output in “Stereo” in the following cases;
– AVCHD playback
– Playback of secondary audio (including the button click
sound).

7.1ch Audio Reformatting
Surround sound with 6.1ch or less is automatically expanded
and played back at 7.1ch.
≥ If “Off” is selected, sound is played over the original number
of channels. (Note that in the case of 6.1ch audio, playback
will be at 5.1ch.)
Audio reformatting is enabled in the following cases:
≥ When you have selected “PCM” in “Digital Audio Output”.
≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby
TrueHD or LPCM.

Choose whether to show status messages automatically.

Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to “On”:
If there is no operation for 10 minutes or more, Direct
Navigator screen switches to FUNCTIONS screen
automatically.
≥ While playing and pausing, etc., this function is not
available.
≥ As for Music [CD-DA] or MP3, regardless of the setting, if
there is no operation for a while, Direct Navigator screen
switches to the other states automatically.

FL Display
Changes the brightness of the unit’s display.
≥ If “Auto” is selected the display is dimmed during playback
and bright not during playback.

SD Card LED Control
Set the lighting method for the SD card LED.
≥ If “SD inserted” is selected, and this unit is turned on and
SD card is inserted, the lamp is lighted.

HDMI(SUB) V.OFF LED Control
Set to light the HDMI (SUB) V.OFF LED or not.
≥ This will light when “HDMI(SUB) Output Mode” (> 32) is set
to “V.OFF”, and the power of the connected equipment to
the HDMI SUB AV OUT is on.

License
Information about the software used by this unit is displayed.

VQT2J87(ENG)

Settings

VQT2J87~Body_eng.fm 31 ページ

DMP-BDT300_VQT2J87_eng.book 32 ページ

２０１０年１月２６日

火曜日

TV / Device Connection
3D Type
Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when “Checker
board” and “Side by side” are selected.

TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9
ratio image:

4:3 Pan &
Scan

The sides are cut off so
the picture fills the screen.
When playing BD-Video,
video is output as “4:3
Letterbox”.

Black bands appear at the
4:3 Letterbox top and bottom of the
picture.
When connected to a 16:9 widescreen television and
playing 4:3 ratio image:
Video is displayed as a 4:3 ratio image in the
center of the screen.

16:9
16:9 Full

Video is displayed as a horizontally
stretched 16:9 image.

HDMI Connection
Press [OK] to show the following settings:

HDMI Video Mode
Select “On” when video is output from HDMI AV OUT
terminal.
On

Images are output from the HDMI terminal in the
resolution set in “HDMI Resolution”.

Off

Images are output in the resolution set in
“Component Video Resolution”.

HDMI(SUB) Output Mode
Set to output the video from the HDMI SUB AV OUT
terminal or not.

HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “¢”. When any item without “¢”
is selected, the images may be distorted.
≥ If “Auto” is selected, automatically selects the output
resolution best suited to the connected television.
≥ To enjoy high-definition video up-converted to 1080p, you
need to connect the unit directly to 1080p compatible
HDTV (High Definition Television). If this unit is connected
to an HDTV through other equipment, it must also be
1080p compatible.

午後１時５２分

24p Output
When this unit is connected to a TV supporting 1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then also set
“24p” in “Video” (> 29) to “On”.
≥ When BD-Video images other than 24p are played,
images are output at 60p.

HDMI Color Mode
This setting is for selecting color-space conversion of the
image signal when the unit is connected using an HDMI
cable.

HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥ Select “Off” when the TV is connected to this unit via an
HDMI terminal, and this unit is also connected to other
devices, such as an amplifier/receiver via a COAXIAL or
an OPTICAL terminal.

VIERA Link
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI Control”.

Deep Color Output
This setting is for selecting whether to use Deep Color
output when a television that supports Deep Color is
connected.

Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.

Component Video Resolution
This sets the video output resolution when connected via the
COMPONENT VIDEO OUT terminal.
≥ Even if you select “720p” or “1080i”, the video output
resolution is restricted to “480p” when images of DVD-Video
discs are output from the COMPONENT VIDEO OUT
terminals.

Analog Audio Output
You can set the optimum multi-channel surround sound
for your speakers from this unit when the settings cannot be
adjusted from a connected amplifier/receiver with AUDIO
OUT terminals.
Select “2ch (Downmix) + 5.1ch” or “7.1ch” and press [OK],
and then set the following options.
– Speaker presence and size ( L C R SW LS RS LB RB )
– Delay time (

ms
0.0

)

– Channel balance (

dB
0.0

)

To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].

VQT2J87(ENG)

DMP-BDT300_VQT2J87_eng.book 33 ページ

２０１０年１月２１日

Network

木曜日

午後８時９分

MAC Address
Displays the MAC address of this unit.

Network Easy Setting (> 15)
Perform network-related settings individually.
Press [OK] to show the following settings:

LAN Connection Mode
Select connection method.

Access Point Connection Setting
This allows the Wireless router (Access point) and
connection settings to be set and the current connection
settings and connection state to be checked when a
wireless connection is used.
Connection Setting
The Wireless router (Access point) connection wizard will
be displayed.
Double Speed Mode Setting (2.4GHz) [BDT350]
When a 2.4 GHz wireless format is used, this setting sets
the connection speed.
≥ If you connect using the “Double Speed Mode(40MHz)”,
2 channels use the same frequency band, and there is
consequently a greater risk of reception interference.
This can cause the connection speed to drop or the
connection to become unstable.

IP Address/DNS Settings
This is for checking the state of the network connection and
setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting” is enabled only when “Auto
Detect Connection Speed” is turned “Off”.

Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.

Internet Content Settings (> 25) (VIERA CAST)
Press [OK] to show the following settings:
Lock
You can restrict the usage of VIERA CAST.
≥ Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while using
the VIERA CAST.
≥ Depending on contents, this function effect will not work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s
time to match your location.
≥ Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.

Others
Off Timer
Select how long the unit remains on when it is not being used.

Remote Control Code
Change the remote control code, when other Panasonic
products react to this remote control.

Quick Start
Speed of startup from power off is increased.
≥ Internal control unit will be powered when it is set to “On”, so
contents of the following will be different from the time it is
set to “Off”.
– Idle power consumption will increase. (about the power
consumption > 43)
– The cooling fan may turn slowly to prevent overheating of
internal parts.

Easy Setting
You can execute basic settings (“On-screen Language”, “TV
Aspect”, “Analog Audio Output”, “Quick Start”)

Restore Default Settings
This returns all values in the Setup menu and the Playback
menu, except for “Remote Control Code”, “On-screen
Language”, “IP Address/DNS Settings”, “Proxy Server
Settings”, “Lock”, “DVD-Video Ratings” and “BD-Video
Ratings” to the default settings.

DivX Registration (> 22)
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.

System Information
Display firmware version of this unit, wireless LAN module of
your Wireless LAN Adaptor.

Firmware Update (> 17)

Settings

Network Settings

Press [OK] to show the following settings:

Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned on
and you can update it if necessary.

Update Now
You can update the firmware manually.

VQT2J87(ENG)

DMP-BDT300_VQT2J87_eng.book 34 ページ

２０１０年１月２１日

木曜日

Troubleshooting guide

午後８時９分

Reference

Before requesting service, please perform the
following steps.
Do you have the latest firmware installed?
Firmware updates may be released to correct operating
irregularities that are discovered with certain movies.
(> 17)
4

Make the following checks and visit our
website for more information.
For USA :
http://www2.panasonic.com/consumer-electronics/support/
Enter the model number.
For Canada :
http://www.panasonic.ca
4
Even so, you still have trouble,

Visit our website to find a service center.
You can find a service center near you easily on our
website.
Other support information:
“Customer Services Directory (United States and Puerto
Rico)” (> 46) or “Limited Warranty (Only for
CANADA)” (> 47).
The following do not indicate a problem with this unit:
≥ Regular disc rotating sounds.
≥ Image disturbance during search.

∫ Unit doesn’t respond to remote control
or front panel buttons.

General operation
To return to the factory preset.
¾ Select “Yes” in “Restore Default Settings” in the Setup
menu. (> 33)

To return all settings to the factory preset.
¾ Reset the unit as follows:
1 While the unit is off, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “08 FIN” is displayed on the
unit's display.
3 Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 3 seconds.

Power of this unit is turned off when the input
for the TV is switched.
¾ This is a normal phenomenon when using VIERA Link
(HDAVI Control 4 or later). For details please read the
operating instructions for the TV.

The remote control doesn’t work properly.
¾ The remote control and main unit are using different
codes. Change the code on the remote control. (> 33)
¾ It may be necessary to set the manufacturer code or the
remote control code again after changing the batteries for
the remote control. (> 17)

The TV tuner mode is not displayed when the
TV is switched on.

Press and hold [POWER Í/I] on the main unit for 3 seconds.
– If still unable to power the unit off, disconnect the power
cord, wait 1 minute, then reconnect the power cord.

¾ This phenomenon may occur, depending on the TV
setting, when “Quick Start” is set to “On”.
– Depending on the TV, this phenomenon may be prevented
by reconnecting the HDMI cable to a different HDMI input
terminal or by changing the HDMI auto connection setting.

∫ Cannot eject disc.

You have forgotten your ratings password.
You want to cancel the ratings level.

The unit may have a problem.
1 While the unit is off, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “06 FTO” is displayed on
the unit's display.
3 Press [OK] on the remote control or [< OPEN/CLOSE] on
the unit.

¾ The ratings level returns to the factory preset.
1 While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “03 VL” is displayed on the
unit's display.
3 Press [OK] on the remote control or [< OPEN/CLOSE] on
the unit.

VQT2J87(ENG)

VQT2J87~Body_eng.fm 35 ページ

２０１０年１月２６日

火曜日

Picture
The images from this unit do not appear on
the television.
Picture is distorted.
¾ An incorrect resolution is selected in “Component Video
Resolution” or “HDMI Resolution”. Reset the setting as
follows:
1 While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “04 PRG” is displayed on
the unit's display.
3 Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 3 seconds.
Set the item again. (> 32)
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio
are not output in bitstream, select “Yes” in “Restore Default
Settings” and make proper settings. (> 33)

Video is not output.
¾ Set the “High Clarity Sound” in the Playback menu to “Off”
to use the COMPONENT VIDEO OUT terminal or the
VIDEO OUT terminal. (> 29)
¾ Video from the HDMI SUB AV OUT terminal is not output
when the “HDMI(SUB) Output Mode” is set to “V.OFF”.
(> 32)

Video is not output in high-definition.
¾ Confirm that the “HDMI Video Mode”, “HDMI Resolution”,
and “Component Video Resolution” in the Setup menu are
set properly. (> 32)

午後２時４１分

A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾ Confirm the “TV Aspect” is set properly. (> 32)
¾ Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (> 20) on the unit is
also possible)

Audio
Cannot switch audio.
¾ When connecting an amplifier/receiver using a COAXIAL/
OPTICAL terminal or an HDMI terminal, you cannot
switch the audio if “Digital Audio Output” is set to
“Bitstream”. Set “Digital Audio Output” to “PCM” or
connect using AUDIO OUT terminal. (> 11, 31)

Cannot hear the desired audio type.
¾ Check the connections and the “Digital Audio Output”
settings. (> 31)
¾ When the unit is connected to an amplifier/receiver with
the AUDIO OUT terminal, set “Analog Audio Output”.
(> 32)
¾ To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. (> 32)
¾ When connecting this unit to a TV via an HDMI MAIN AV
OUT and to an amplifier/receiver via an HDMI SUB AV
OUT, set “HDMI(SUB) Output Mode” to “V.OFF”. (> 10)

3D video is not output.
¾ Is there a non-3D compatible amplifier/receiver connected
between this unit and a TV? (> 10)
¾ If there is a non-3D compatible amplifier/receiver
connected to the HDMI SUB AV OUT terminal, set the
“HDMI(SUB) Output Mode” to “V.OFF”. (> 10)
¾ Are the settings on this unit and the TV correct? (> 23)
¾ Is the amplifier/receiver connected to between this unit
and TV on?

No subtitles.
¾ When progressive output is on, closed captions/subtitles
cannot be displayed.

The subtitles overlap closed captions
recorded on discs.

Reference

¾ Turn off the subtitles or turn off the closed caption setting
on the TV. (> 28)

VQT2J87 (ENG)

DMP-BDT300_VQT2J87_eng.book 36 ページ

２０１０年１月２１日

木曜日

Playback

午後８時９分

Network

Disc cannot be played.

I can’t connect to the network.

¾ The disc is dirty. (> 4)

¾ Confirm the network connection and settings. (> 12, 33)
¾ Check the operating instructions for each device and
connect accordingly.

The contents of the USB device cannot be
read.
¾ USB devices connected using a USB extension cable
other than the one included or a USB hub may not be
recognized by this unit.
¾ If inserted during playback the USB device may not be
recognized by this unit.
¾ If two USB devices other than Wireless LAN adaptor are
connected simultaneously, they will not be recognized by
this unit.

Still pictures (JPEG) do not play back
normally.
¾ The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.

I can’t play back BD-Live.
¾ The SD card is write-protected. (> 7)
¾ Confirm that this unit is connected to the broadband
Internet. (> 12)
¾ Confirm the “BD-Live Internet Access” settings. (> 30)
¾ Confirm an SD Card is inserted into the SD Card slot.
(> 18)

VQT2J87(ENG)

When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback. [BDT350]
¾ Higher transfer rate router such as 802.11n (2.4 GHz or 5
GHz) Wireless router (Access Point) may solve the
problem. If you use 802.11n (2.4 GHz or 5 GHz) Wireless
router (Access Point), it is necessary to set the encryption
type to “AES”.
Simultaneous use with a microwave, cordless telephone
etc. at 2.4 GHz may result in connection interruptions or
other problems.
¾ On the “Access Point Connection Setting” screen (> 33),
the continuous lighting of at least 4 “Reception” indicators
is the target for a stable connection. If 3 or fewer
indicators are lit or the connection is being interrupted,
change the position or angle of your Wireless router
(Access point) and see if the connection state improves. If
there is no improvement, connect to a wired network and
perform the “Network Easy Setting” (> 15) again.

DMP-BDT300_VQT2J87_eng.book 37 ページ

２０１０年１月１８日

Messages
The following messages or service numbers appear on the
television or unit’s display when something unusual is
detected during startup and use.

On the television
Cannot play.

月曜日

午後５時２７分

No READ
¾ The media is dirty or badly scratched. The unit cannot
play.

PLEASE WAIT
¾ The unit is carrying out an internal process. This is not a
malfunction. You cannot operate the unit while “PLEASE
WAIT” is displayed.

REMOVE

¾ You inserted an incompatible disc (Discs recorded in PAL
video, etc.).

¾ The USB device is drawing too much power. Remove the
USB device.

Cannot display on this unit.

SET 

No disc is inserted.
¾ The disc may be upside down.
$ This operation is not available.
¾ Some operations are unsupported by the unit. For
example;
– BD-Video: During playback, reverse slow-motion or reverse
frame-by-frame is not possible.

IP address is not set.
¾ The “IP Address” in “IP Address/DNS Settings” is “---. ---.
---. ---”. Set the “IP Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address acquisition if
necessary.)

The current security setting of Wireless LAN
is low. It is recommended to change the
setting. [BDT350]
¾ Authentication type for the Wireless LAN is set to “Open
system”, or the encryption type is set to “No encryption”. It
is recommended to encrypt for safety reasons. For
details, refer to the instructions of the Wireless router
being used. Encryption is required when playing back
video, etc., from DLNA compatible devices.

On the unit’s display
F99
¾ The unit fails to operate properly. Press [POWER Í/I] on
the main unit to switch the unit to standby for 3 seconds.
Now press [POWER Í/I] on the main unit again to turn
the unit on.

HDMI ONLY
¾ Some BD-Video discs can only be output with HDMI.

NET
¾ Displays while VIERA CAST is starting up.

(“ ” stands for a number.)
¾ The remote control and main unit are using different
codes. Change the code on the remote control.
Press and hold [OK] and the
indicated number button at the
same time for more than 5
seconds.

U59
¾ The unit is hot.
The unit switches to standby for safety reasons. Wait for
about 30 minutes until the message disappears.
Select a position with good ventilation when installing the
unit. Do not block the cooling fan on the rear of the unit.

U72
U73
¾ The HDMI connection acts unusually.
– Turn the unit and TV off.
– Disconnect the HDMI cable between the player and the
TV.

H or F

(“ ” stands for a number.)
¾ There is something unusual.
¾ Check the unit using the troubleshooting guide. If the
service number does not disappear, do the following.
1 Disconnect the plug from the AC outlet, wait a few
seconds, then reconnect it.
2 Press [POWER Í/I] to turn the power on.
If the service number does not disappear despite doing the
above, request service from the dealer. Inform the dealer of
the service number when requesting service.

START
¾ The system is being restarted during the firmware update.
Please do not turn off power.

UPD/
(“ ” stands for a number.)
¾ The firmware is being updated.
Please do not turn off power.

FINISH
¾ The firmware update is complete.

Reference

¾ You tried to play a non-compatible image.
¾ Confirm “SD” on the unit’s display is not blinking and
re-insert the card.

No PLAY
¾ There is a viewing restriction on a BD-Video or
DVD-Video. (> 30)

VQT2J87 (ENG)

DMP-BDT300_VQT2J87_eng.book 38 ページ

２０１０年１月１８日

月曜日

午後５時２７分

Audio Information
About audio from audio output terminals
The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. (> 31,
Digital Audio Output)
≥ The number of channels listed is the maximum possible number of output channels.

HDMI AV OUT/DIGITAL AUDIO OUT (Coaxial/Optical)
Terminal
“Dolby D/Dolby D +/Dolby
TrueHD”/“DTS/DTS-HD”
“BD-Video Secondary Audio”
Dolby Digital/
Dolby Digital EX*5

HDMI AV OUT
“Bitstream”*1

DTS-HD High Resolution
Audio/
DTS-HD Master Audio

“PCM”*2

“Off”

“On”*3

“Off”

“On”*4

DVD-Video : 5.1ch PCM
Dolby Digital

Dolby Digital Plus/
Dolby TrueHD
DTS Digital Surround/
DTS-ES*5

DIGITAL AUDIO OUT

Outputs using
original audio
DTS Digital
Surround

“PCM”

“On”/“Off”

BD-Video : 7.1ch PCM*7

Dolby Digital/
Dolby Digital
EX*6

7.1ch PCM

Dolby Digital

DVD-Video : 5.1ch PCM

DTS Digital
Surround/
DTS-ES*6

BD-Video : 7.1ch PCM*8

Down-mixed
2ch PCM

DTS Digital
Surround

7.1ch PCM*8

7.1ch LPCM

“Bitstream”

7.1ch PCM

Down-mixed 2ch PCM

AUDIO OUT
Terminal

7.1ch AUDIO OUT

5.1ch AUDIO
OUT

2ch AUDIO
OUT

“BD-Video Secondary Audio”

“On”*4/“Off”

“On”/“Off”

Dolby Digital/
Dolby Digital EX

DVD-Video : 5.1ch

5.1ch

2ch

Dolby Digital Plus/
Dolby TrueHD
DTS Digital Surround/
DTS-ES

*2
*3

*4
*5

*7
*8

BD-Video : 7.1ch*7
7.1ch
DVD-Video : 5.1ch
BD-Video : 7.1ch*8

DTS-HD High Resolution
Audio/
DTS-HD Master Audio

7.1ch*8

7.1ch LPCM

7.1ch

When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS Digital Surround bitstream or
down-mixed 2ch PCM (e.g., TV).
When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
When playing BD-Video without secondary audio or button click sound, the audio is output as the same format as if “BD-Video Secondary Audio” was set to
“Off”.
When playing BD-Video with secondary audio or button click sound, the audio is output as 5.1ch.
With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio decoded as DTS
Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital Surround, however if
playing BD-Video without secondary audio or button click sound, the audio is output as the original format.
When BD-Video is played and “7.1ch Audio Reformatting” is set to “Off”, the audio is output as 5.1ch.
The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on the DTS, Inc. specifications.

VQT2J87(ENG)

DMP-BDT300_VQT2J87_eng.book 39 ページ

２０１０年１月２６日

火曜日

午後１時５２分

Recommended audio output setting
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items.
Press [SETUP] > “Audio” > Set each item
For details of the each item, refer to page 31.
Example of connected equipment

TV via HDMI*1

Receiver with
HD audio*2
decoder via
HDMI

Receiver without
HD audio*2
decoder via
HDMI

Receiver via
COAXIAL or
OPTICAL

Receiver
via analog output*3

“Dolby D/Dolby
D +/Dolby
TrueHD”

“PCM”

“Bitstream”

“PCM”

No effect

“DTS/DTS-HD”

“PCM”

“Bitstream”

“PCM”

No effect

“BD-Video
Secondary
Audio”

“Off”

“PCM Down Conversion”

No effect

“Off”*4

“Downmix”

“Stereo”

No effect

“Stereo”

“High Clarity Sound”

“Enable”

“Disable”*6

Setup menu

“Digital
Audio
Output”

No effect
*5

No effect
“Disable”*6

≥ Because underlined items are the factory presets, it is not necessary to change these settings.
*2
*3
*4
*5
*6

If connected to TV via the COAXIAL, OPTICAL or AUDIO OUT terminal, these settings have no effect.
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”. (Press [SETUP] > TV / Device Connection)
If the connected equipment that does not support 96 kHz, set to “On”.
If the connected equipment that supports the virtual surround function, set to “Surround encoded”.
When connected to TV via the HDMI terminal for outputting image, set to “Enable”.

Reference

VQT2J87 (ENG)

DMP-BDT300_VQT2J87_eng.book 40 ページ

２０１０年１月２１日

木曜日

About MP3/JPEG/DivX/
AVCHD/MPEG2 files
MP3
File format

MP3

Extension

Files must have the extension “.mp3” or
“.MP3”.

Compression
rate

32 kbps to 320 kbps

午後８時９分

Subtitles text file of DivX
File format

MicroDVD, SubRip, or TMPlayer

Extension

Files must have the extension “.SRT”,
“.srt”, “.SUB”, “.sub”, “.TXT” or “.txt”.

Reference

≥ The DivX video file and subtitles text file
are inside the same folder, and the file
names are the same except for the file
extensions.
≥ Depending on the methods used to
create the file or the state of the
recording, only parts of the subtitles may
be displayed, or the subtitles may not be
displayed at all.

Sampling rate 44.1 kHz/48 kHz
Reference

Subtitles text file of DivX

ID3 tags: version 1, 2.2, 2.3, 2.4
(Only titles and the names of artists)

AVCHD

JPEG
File format

JPEG

File format

Extension

Files must have the extension “.jpg” or
“.JPG”.

AVCHD format (V1.0) used on High
Definition Video Camera
(Panasonic and some others)

Codec

MPEG-4 AVC/H.264

Picture
resolution

between 34k34 and 8192k8192 pixels
(sub sampling is 4:2:2 or 4:2:0)

Reference

JPEG conforming DCF* is supported.
≥ MOTION JPEG and Progressive JPEG is
not supported

* Design rule for Camera File system: unified standard
established by Japan Electronics and Information
Technology Industries Association (JEITA).
≥ DVD-RAM must conform to UDF 2.0.
≥ BD-RE must conform to UDF 2.5.

≥ Discs must conform to UDF 2.5.

MPEG2
File format

SD-Video format* used on Standard
Definition Video Camera
(Panasonic and some others)

Codec

MPEG2

* SD-Video Entertainment Video Profile

DivX
File format

DivX

Extension

Files must have the extension “.DIVX”,
“.divx”, “.AVI” or “.avi”.

Picture
resolution

Up to 1920k1080 pixels

Reference

≥ DivX certified to play DivX video up to HD
1080p, including premium content.
Video
– Number of streams: Up to 1
– Codec: DIV3, DIV4, DIVX, DX50, DIV6
– FPS (Frame Per Second): Up to 60 fps
Audio
– Number of streams: Up to 8
– Format: MP3, MPEG, Dolby Digital
– Multi channel: Dolby Digital is possible.
MPEG multi is 2 ch conversion.
≥ GMC (Global Motion Compensation) is
not supported.

≥ DVD-R and DVD-R DL must conform to UDF 1.02 without
ISO9660 and UDF 1.5 with ISO9660.
≥ BD-R must conform to UDF 2.5.

VQT2J87(ENG)

≥ With certain recording states and folder structures, the play order may
differ or playback may not be possible.
≥ CD-R, CD-RW : ISO9660 level 1 or 2 (except for extended formats), Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
≥ DVD-R, DVD-R DL (except for AVCHD) : ISO9660 level 1 or 2 (except for
extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660)
This unit is not compatible with multi-session.
This unit is not compatible with packet writing.

DMP-BDT300_VQT2J87_eng.book 41 ページ

２０１０年１月１８日

月曜日

午後５時２７分

Structure of MP3 folders

Structure of folders that can be
played in this unit

in DVD-R/DVD-R DL/CD-R/CD-RW/USB device
Prefix the file names with 3-digit numbers in the order you
want to play them.
e.g.,
Root

You can play files on this unit by structure of folders as
shown below. However depending on the method of
writing data (writing software), play may not be in the
order you numbered the folders.

001XXXX.mp3
002XXXX.mp3
001

003XXXX.mp3
004XXXX.mp3
005XXXX.mp3

Folder which can be displayed with this unit
¢¢¢: Numbers
XXX: Letters
*2

Folder B
006XXXX.mp3
007XXXX.mp3
008XXXX.mp3
009XXXX.mp3

¢¢¢: from 001 to 999
¢¢¢: from 100 to 999
XXXXX: 5 figures
¢¢¢¢: from 0001 to 9999
XXXX: 4 figures

Folder C

010XXXX.mp3
011XXXX.mp3
012XXXX.mp3

Structure of DivX folders

Structures of still picture (JPEG) folders

in BD-R*7/DVD-R*7/DVD-R DL*7/CD-R*7/CD-RW*7/USB
device*7
Files inside a folder are displayed in the order they were
updated or taken.
e.g.,
Root

in DVD-R*4/DVD-R DL*4/CD-R*5/CD-RW*5
Files inside a folder are displayed in the order they were
updated or taken.
Root
e.g.,
P0000001.jpg
P0000002.jpg

P0000001.divx
P0000002.divx

Folder A

P0000003.jpg
P0000004.jpg
P0000005.jpg

P0000003.divx
P0000004.divx
P0000005.divx

Folder B

P0000006.jpg
P0000007.jpg
P0000008.jpg
P0000009.jpg

P0000006.divx
P0000007.divx
P0000008.divx
P0000009.divx

Folder C

P0000010.jpg
P0000011.jpg
P0000012.jpg

P0000010.divx
P0000011.divx
P0000012.divx

in BD-RE*6/DVD-RAM*4
≥ Folder structure is not displayed.
Root
e.g.,

P0000001.jpg
P0000002.jpg

JPEG
DCIM

The total combined maximum number of recognizable picture contents
and folders: 3000 picture contents and 300 folders.
The total combined maximum number of recognizable picture contents
and folders: 999 picture contents and 99 folders.
The total combined maximum number of recognizable picture contents
and folders: 9999 picture contents and 300 folders.
The total combined maximum number of recognizable file contents and
folders: 200 file contents and 300 folders.

XXXXX *2
XXXX.jpg *3
DCIM

XXXXX *2
XXXX.jpg *3

in SD card*4/USB device*4
Displays JPEG files in all folders.
≥ Folder structure is not displayed.
e.g.,

Root
P0000001.jpg
P0000002.jpg
DCIM

XXXXX *2
XXXX.jpg *3

Folder A

Reference

Folder A

P0000003.jpg
P0000004.jpg

VQT2J87 (ENG)

DMP-BDT300_VQT2J87_eng.book 42 ページ

２０１０年１月１８日

月曜日

午後５時２７分

Supplemental information
∫ TV/Amplifier/Receiver code list
Brand

TV Code

Display Language Display Language Display Language

Panasonic
FUNAI

0051 / 0055 / 0250 / 0650
0180 / 0171 / 0179
0016 / 0032 / 0038 / 0056 / 0095 / 0097 / 0145 / 0151 / 0173 / 0227 / 0279 / 0409 / 0413 /
HITACHI
1145
INSIGNIA
1564 / 0171 / 1204 / 1326 / 1517 / 1660 / 2002 / 2003/ 2004
0036 / 0053 / 0069 / 0160 / 0169 / 0182 / 0731 / 1253
JVC
LG
0019 / 0030 / 0032 / 0106 / 0178 / 0317 / 0409 / 0442 / 0457 / 0700 / 0856 / 1178 / 1265
MITSUBISHI 0014 / 0019 / 0093 / 0098 / 0150 / 0155 / 0178 / 0331 / 0358 / 0836 / 0868 / 1250
0054 / 0690 / 1154 / 1454
PHILIPS
PIONEER
0038 / 0166 / 0172 / 0679 / 0866
POLAROID 0765 / 0865 / 1262 / 1276 / 1314 / 1316 / 1326 / 1327 / 1328 / 1341 / 1498 / 1523 / 2002
0019 / 0030 / 0032 / 0056 / 0060 / 0178 / 0329 / 0408 / 0427 / 0587 / 0702 / 0766 / 0812 /
SAMSUNG
0814 / 1060
SANYO
0088 / 0107 / 0146 / 0154 / 0159 / 0232 / 0484 / 0799 / 0893
SHARP
0039 / 0093 / 0153 / 0157 / 0165 / 0220 / 0281 / 0386 / 0398 / 0491 / 0688 / 0818 / 0851
SONY
0000 / 0011 / 0080 / 0111 / 0273 / 0353 / 0810 / 0834 / 0867 /1100
0036 / 0060 / 0149 / 0154 / 0156 / 0650 / 0832 / 0845 / 1156 / 1164 / 1256 / 1265 / 1356 /
TOSHIBA
1656 / 1704
1758 / 0864 / 0885 / 1756
VIZIO
WESTINGHOUSE 0885 / 0889 / 0890 / 1282 / 1577

Brand

Amplifier
Code

0308
Panasonic
COBY
DENON
EMERSON
HARMAN / KARDON
INSIGNIA
JVC
LG
MARANTZ
ONKYO
PHILIPS
PIONEER
0823
RCA
0823
SAMSUNG
0815 / 1126
SONY
0354
YAMAHA

Receiver Code
1308 / 0039 / 0367 / 1641 / 2001 / 2002
1513 / 2003
1360 / 0004 / 0273 / 1142 / 1311
1340 / 2005
0110 / 0189 / 1306
1030 / 1077 / 1751 / 2004
0074 / 1374 / 1495 / 1855 / 1871
1293 / 2006
1189 / 1269 / 0039 / 0189 / 1289
0135 / 0380 / 1298 / 1320
1189 / 1269 / 0189 / 0391 / 1120 / 1266 / 1368
1023 / 0150 / 0244 / 0531 / 0630 / 1343 / 1384
1023 / 1609 / 1254 / 0054 / 0530 / 0531 / 1074 / 1390 / 1511
1295
1622 / 0158 / 0168 / 0474 / 1367 / 1529 / 1658 / 1758
0176 / 0186 / 1331

∫ Video attribute
Display
MPEG-2/MPEG-4 AVC/VC-1
480/576/720/1080
24p/50i/60i/50p/60p
YCbCr4:2:2/YCbCr4:4:4/RGB
bps (bit per second)
V.OFF

Meaning
Video recording method
Video Format
Video Frame rate
Color Space
Transfer rate of bit
No video from HDMI(SUB)
terminal

∫ Audio attribute
Display
LPCM/

Digital/

VQT2J87(ENG)

Meaning

Digital+/

TrueHD/DTS/DTS-ES Mtrx/
DTS-ES Dscrt/DTS 96/DTS 96 ES Mtrx/
DTS-HD HI RES/DTS-HD MSTR/MPEG
ch (channel)
k (kHz)
b (bit)
bps (bit per second)

∫ Display languages list

Signal type
Number of channels
Sampling frequency
Number of bits
Transfer rate of bit

ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS

English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian

JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN

Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
Finnish

ARA
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR

Arabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others

∫ Language code list
Language Code

Language

Abkhazian
6566
Afar:
6565
Afrikaans:
6570
Albanian:
8381
Amharic:
6577
Arabic:
6582
Armenian:
7289
Assamese:
6583
Aymara:
6589
Azerbaijani:
6590
Bashkir:
6665
Basque:
6985
Bengali; Bangla:
6678
Bhutani:
6890
Bihari:
6672
Breton:
6682
Bulgarian:
6671
Burmese:
7789
Byelorussian: 6669
Cambodian:
7577
Catalan:
6765
Chinese:
9072
Corsican:
6779
Croatian:
7282
Czech:
6783
Danish:
6865
Dutch:
7876
English:
6978
Esperanto:
6979
Estonian:
6984
Faroese:
7079
Fiji:
7074
Finnish:
7073
French:
7082
Frisian:
7089
Galician:
7176
Georgian:
7565
German:
6869
Greek:
6976
Greenlandic:
7576
Guarani:
7178

Gujarati:
Hausa:
Hebrew:
Hindi:
Hungarian:
Icelandic:
Indonesian:
Interlingua:
Irish:
Italian:
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Korean:
Kurdish:
Laotian:
Latin:
Latvian, Lettish:
Lingala:
Lithuanian:
Macedonian:
Malagasy:
Malay:
Malayalam:
Maltese:
Maori:
Marathi:
Moldavian:
Mongolian:
Nauru:
Nepali:
Norwegian:
Oriya:
Pashto, Pushto:
Persian:
Polish:
Portuguese:
Punjabi:
Quechua:

Code Language Code
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8083
7065
8076
8084
8065
8185

Rhaeto-Romance:
8277
Romanian:
8279
Russian:
8285
Samoan:
8377
Sanskrit:
8365
Scots Gaelic:
7168
Serbian:
8382
Serbo-Croatian: 8372
Shona:
8378
Sindhi:
8368
Singhalese:
8373
Slovak:
8375
Slovenian:
8376
Somali:
8379
Spanish:
6983
Sundanese:
8385
Swahili:
8387
Swedish:
8386
Tagalog:
8476
Tajik:
8471
Tamil:
8465
Tatar:
8484
Telugu:
8469
Thai:
8472
Tibetan:
6679
Tigrinya:
8473
Tonga:
8479
Turkish:
8482
Turkmen:
8475
Twi:
8487
Ukrainian:
8575
Urdu:
8582
Uzbek:
8590
Vietnamese:
8673
Volapük:
8679
Welsh:
6789
Wolof:
8779
Xhosa:
8872
Yiddish:
7473
Yoruba:
8979
Zulu:
9085

DMP-BDT300_VQT2J87_eng.book 43 ページ

２０１０年１月２６日

火曜日

午後１時５２分

Specifications
Signal system:
NTSC
Operating temperature range:
i5 oC to i35 oC (i41 oF to i95 oF)
Operating humidity range:
10 % to 80 % RH (no condensation)
Video output:
1.0 Vp-p (75 ≠)/Pin jack:1 system
Component video output (Y:green, PB:blue, PR:red):
Y:1.0 Vp-p (75 ≠)/PB, PR:0.7 Vp-p (75 ≠)/Pin jack:1 system
Audio output:
2 Vrms (1 kHz, 0 dB)/Pin jack
Number of connectors :
7.1 channel discrete output:1 system
(2 channel + 5.1 channel discrete output)
Digital audio output:
Optical digital output : Optical terminal
Coaxial digital output : Pin jack
HDMI AV output:
Type A (19 pin) : 2 system(Main/Sub)
HDMI (3D, Content Type)
This unit supports “HDAVI Control 5” function.
SD card slot:
Connector : 1 system
USB slot:
USB2.0 : 2 systems
Ethernet:
10BASE-T/100BASE-TX : 1 system
LASER Specification
Class I LASER Product:
Wave length:790 nm (CDs)/650 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous radiation is emitted with the
safety protection
Power supply:
AC 120 V, 60 Hz
Power consumption:
Approx. 31 W
Approx. 0.1 W
Power consumption in standby mode:
Power consumption in quick start standby mode:
Approx. 7.7 W
Dimensions (WkDkH)
Including the projecting parts:
430 mmk245 mmk66 mm
(Approx. 16 15/16zk9 11/16zk2 5/8z)
Mass (Weight):
Approx. 2.6 kg (5.7 lbs)

Wireless LAN Adaptor (DY-WL10)
Dimensions (WkDkH):
44 mmk72 mmk27 mm
(1 3/4zk2 7/8zk1 1/8z)
Mass (Weight):
Approx. 29 g (1.02 oz)
Antenna:
Tx 1, Rx 2
Interface:
USB2.0
Standard Compliance:
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
Transmission system:
MISO-OFDM system, OFDM system, DSSS system
Frequency Range:
IEEE802.11n / IEEE802.11a:
5.15 GHz - 5.35 GHz/5.47 GHz - 5.825 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n:
2.4 GHz - 2.4835 GHz
Transfer rate (standard)*:
IEEE802.11n:
Tx Max. 150 Mbps, Rx Max. 300 Mbps
IEEE802.11g / IEEE802.11a:
Max. 54 Mbps
IEEE802.11b:
Max. 11 Mbps
Access Mode:
Infrastructure mode
Security:
WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 bit / 128 bit)
(This unit supports WPA and WPA2 encryption.)

Reference

* Transfer rates are theoretical values; however, actual
communication rate will vary according to communication
environment or connected equipment.
Specifications are subject to change without notice.

VQT2J87 (ENG)

VQT2J87~Body_eng.fm 44 ページ

２０１０年１月２２日

金曜日

午後３時２０分

Java and all Java-based trademarks and logos are
trademarks or registered trademarks of Sun Microsystems,
Inc. in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 &
other U.S. and worldwide patents issued & pending.
DTS and the Symbol are registered trademarks, & DTS-HD,
DTS-HD Master Audio | Essential and the DTS logos are
trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology
must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
This product is licensed under the AVC patent portfolio
license and VC-1 patent portfolio license for the personal
and non-commercial use of a consumer to (i) encode video
in compliance with the AVC Standard and VC-1 Standard
(“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that
was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video
provider licensed to provide AVC/VC-1 Video. No license is
granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC. See
http://www.mpegla.com.
HDAVI ControlTM is a trademark of Panasonic Corporation.
x.v.ColorTM is a trademark.
VIERA LinkTM is a trademark of Panasonic Corporation.
VIERA CASTTM is a trademark of Panasonic Corporation.
EZ SyncTM is a trademark of Panasonic Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
DivX® is a registered trademark of DivX, Inc., and is used
under license.
“Blu-ray Disc” is a trademark.
“BD-LIVE” logo is a trademark of Blu-ray Disc Association.
“BONUSVIEW” is a trademark of Blu-ray Disc Association.
YouTube and Picasa are trademarks of Google,Inc.
The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
DLNA®, the DLNA Logo and DLNA CERTIFIEDTM are
trademarks, service marks, or certification marks of the
Digital Living Network Alliance.
Windows is a registered trademark of Microsoft Corporation
in the United States and other countries.

VQT2J87(ENG)

“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of Blu-ray
Disc Assosiation.
This product incorporates the following software:
(1) the software developed independently by or for
Panasonic Corporation,
(2) the software owned by third party and licensed to
Panasonic Corporation,
(3) the software licensed under the GNU General Public
License, Version 2 (GPL v2),
(4) the software licensed under the GNU LESSER General
Public License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software other than the software licensed
under the GPL v2 and/or LGPL v2.1
For the software categorized as (3) and (4), please refer to
the terms and conditions of GPL v2 and LGPL v2.1, as the
case may be at
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
In addition, the software categorized as (3) and (4) are
copyrighted by several individuals. Please refer to the
copyright notice of those individuals at
http://www.am-linux.jp/dl/JPRCBW98
The GPL/LGPL software is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY, without even
the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic
will give to any third party who contacts us at the contact
information provided below, for a charge no more than our
cost of physically performing source code distribution, a
complete machine-readable copy of the corresponding
source code covered under GPL v2/LGPL v2.1.
Contact Information
cdrequest@am-linux.jp
Source code is also freely available to you and any other
member of the public via our website below.
http://www.am-linux.jp/dl/JPRCBW98

DMP-BDT300_VQT2J87_eng.book 45 ページ

２０１０年１月２１日

Glossary
AVCHD
AVCHD is a new format (standard) for high-definition video
cameras that can be used to record and play high-resolution
HD images.
BD-J
Some BD-Video discs contain Java applications, and these
applications are called BD-J. You can enjoy various
interactive features in addition to playing normal video.
Deep Color
Deep Color is a name for the device that can reproduce
greater color gradation (4096 steps) when connected to a TV
that supports the Deep Color with an HDMI cable. You can
enjoy exceptionally rich, natural-looking colors, with smooth,
detailed gradation and minimal color banding. [A lower color
gradation (256 steps), without Deep Color, will be reproduced
if connected to a TV which does not support Deep Color. The
unit will automatically set appropriate output to suit the
connected TV.]
DLNA (Digital Living Network Alliance) [BDT350]
DLNA is a standard that makes DLNA Certified digital
electronics easier and more convenient to use on a home
network.
Dolby Digital
This is a method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2-channel) audio, these
signals can also be multi-channel audio.
Dolby Digital Plus
Multi-channel audio and higher audio quality is made possible
using Dolby Digital Plus. BD-Video supports up to 7.1 channel
output.
Dolby TrueHD
Dolby TrueHD is a very high quality audio format that
reproduces the studio master audio. BD-Video supports up to
7.1 channel output.

木曜日

午後８時９分

HDMI (High-Definition Multimedia Interface)
HDMI is a digital interface for consumer electronic products.
Unlike conventional connections, it transmits uncompressed
digital video and audio signals on a single cable.
Local storage
This storage area is used as a destination for sub contents for
playing BD-Live on BD-Video.
LPCM (Linear PCM)
These are a kind of PCM format.
These are uncompressed digital signals, similar to those
found on CDs.
P4HD (Pixel Precision Progressive Processing for HD)
This is a processor which makes use of an exclusive
Panasonic algorithm. Various processing is supported,
including a high-level conversion of the TV scanning format
from interlace to progressive and a high-level conversion of
standard resolution (480i or 576i) video signal to a 1080
High-Definition video signal.
Consequently, this unit is able to provide video of optimal
resolution to the connected TV.
PCM (Pulse Code Modulation)
This is one format for converting analog audio into digital
audio, enabling you to enjoy digital audio with no hassle.
x.v.ColorTM
x.v.ColorTM is a name for devices that are compatible with the
xvYCC format, an international standard for expanded color in
motion pictures, and that follow the rules for signal
transmission.
You can enjoy vivid colors of wider color ranges for a more
realistic picture when connected to a TV that supports the
x.v.ColorTM with HDMI cable.
24p
This is a progressive image recorded at a rate of 24 frames
per second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.

DTS (Digital Theater Systems)
This surround system is used in many movie theaters. There
is good separation between the channels, so realistic sound
effects are possible.
DTS-HD
DTS-HD is a high-quality, sophisticated audio format used in
movie theaters. Previous DTS Digital Surround-compatible
equipment can play DTS-HD as DTS Digital Surround audio.
BD-Video supports up to 7.1 channel output.

Reference

DTS-HD High Resolution Audio
This is a signal format achieved by improving the previous
DTS, DTS-ES and DTS96/24 formats. It is compatible with
sampling frequency 96 kHz/48 kHz. BD-Video supports up to
7.1 channel output.
DTS-HD Master Audio
This is a lossless audio format and compatible with 96 kHz/
7.1ch or less. In addition, faithful reproduction of the master
audio is enabled using lossless audio encoding technology.
BD-Video supports up to 7.1 channel output.

VQT2J87 (ENG)

DMP-BDT300_VQT2J87_eng.book 46 ページ

２０１０年１月１８日

月曜日

午後５時２７分

Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Blu-ray and DVD Products
Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Consumer Electronics Company (referred to as “the
warrantor”) will, for the length of the period indicated on the chart below, which
starts with the date of original purchase (“warranty period”), at its option either
(a) repair your product with new or refurbished parts, (b) replace it with a new
or a refurbished equivalent value product, or (c) refund your purchase price.
The decision to repair, replace or refund will be made by the warrantor.

Product or Part Name

Parts

Labor

Blu-ray Disc Player, Portable
Blu-ray Disc Player

1 year

90 days

Blu-ray Home Theater System

1 year

DVD Player, Portable DVD Player

1 year

90 days

DVD Recorder

1 year

90 days

Rechargeable Batteries (pack),
DVD-RAM Disc (defective
exchange)

10 days

Not
Applicable

Wireless LAN adaptor

90 days

Not
Applicable

During the “Labor” warranty period there will be no charge for labor. During the
“Parts” warranty period, there will be no charge for parts. This Limited Warranty
excludes both parts and labor for non-rechargeable batteries, antennas, and
cosmetic parts (cabinet). This warranty only applies to products purchased and
serviced in the United States or Puerto Rico. This warranty is extended only to
the original purchaser of a new product which was not sold “as is”.
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs,
please ship the product prepaid to:
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
panacare@us.panasonic.com
When shipping the unit, carefully pack, include all accessories, and send it
prepaid, adequately insured and preferably in the original carton. If Lithium Ion
batteries are shipped by air the package must be labeled “Contains Lithium Ion
Battery (No lithium metal)”. Damaged batteries are prohibited from shipment by
US Mail. Batteries must be securely packed in a manner to prevent
short-circuiting and a package cannot contain more than 3 Lithium Ion
batteries. Include a letter detailing the complaint, a return address and provide
a daytime phone number where you can be reached. A valid registered receipt
is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or
cosmetic damage. The warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls,

improper maintenance, power line surge, lightning damage,
modification, introduction of sand, humidity or liquids, commercial use
such as hotel, office, restaurant, or other business or rental use of the
product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED
UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY.
(As examples, this excludes damages for lost time, travel to and from
the servicer, loss of or damage to media or images, data or other
memory or recorded content. The items listed are not exclusive, but for
illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty
lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have
other rights which vary from state to state. If a problem with this product
develops during or after the warranty period, you may contact your
dealer or Service Center. If the problem is not handled to your
satisfaction, then write to the warrantor’s Consumer Affairs Department
at the addresses listed for the warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY
THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate
your nearest Dealer or Service Center; purchase Parts and
Accessories; or make Customer Service and Literature requests
by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855

Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express,
and Personal Checks)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277

The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.

User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS

MODEL NUMBER

TELEPHONE NUMBER

SERIAL NUMBER

VQT2J87(ENG)

As of November 2009

DMP-BDT300_VQT2J87_eng.book 47 ページ

２０１０年１月１８日

月曜日

午後５時２７分

Limited Warranty (Only for CANADA)
Panasonic Canada Inc.

PANASONIC PRODUCT—LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period
as stated below from the date of original purchase.

Technics Audio Product
Panasonic Portable/Clock Radio (without Tape, CD, MD)
Panasonic Audio/SD Audio Product
Panasonic BD/DVD Product
Panasonic Combination DVD Player/VCR
Panasonic Combination DVD Recorder/VCR
Accessories including rechargeable batteries

One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
Ninety (90) days

LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed,
subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or which has been
altered or repaired in any way that affects the reliability or detracts from the performance, nor does it cover any product which is
used commercially. Dry cell batteries are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is
required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the
exclusion of implied warranties, so the above limitations and exclusions may not be applicable.
WARRANTY SERVICE
FOR PRODUCT OPERATION ASSISTANCE, please contact:
Our Customer Care Centre:

Telephone #:
1-800 #:
Fax #:
Email link:

(905) 624-5505
1-800-561-5505
(905) 238-2360
“Customer support” on www.panasonic.ca

FOR PRODUCT REPAIRS, please locate your nearest Authorized Servicentre at www.panasonic.ca :
Link : “ServicentresTM locator” under “Customer support”
IF YOU SHIP THE PRODUCT TO A SERVICENTRE

Reference

Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.

VQT2J87 (ENG)

DMP-BDT300_VQT2J87_eng.book 48 ページ

２０１０年１月２６日

火曜日

Referencia rápida en
español (Spanish Quick Reference)
Conexiones básicas

午後１時５２分

Reproducción básica
Preparación
Encienda el televisor y seleccione la entrada de vídeo
adecuada en el televisor.

1 Pulse [Í POWER] para encender la
unidad.

Conexión a un televisor
compatible con HDMI

Después de conectar su nuevo reprodutor y pulsar el
botón de encendido, aparecerá la pantalla de la
configuración básica.

2 Inserte el medio.
Cable HDMI

HDMI IN

Inicia la reproducción
Pulse [1] (PLAY).

Conexión a un televisor con un
cable para audio/vídeo
Cable de audio/
vídeo (incluido)
R
L
AUDIO IN VIDEO IN

Conexión a un televisor compatible
con HDMI y a un amplificador/
receptor compatible con HDMI

Parada
Pulse [∫].
La posición de detención se memoriza.
Función de reanudación de la reproducción
Pulse [1] (PLAY) para reiniciar la reproducción desde esta
posición.
≥ La posición se borra si se abre la bandeja o se pulsa [∫] varias
veces para visualizar “STOP” en el visor de la unidad.
≥ En los discos BD-Video incluidos los BD-J, la función
de reanudación de la reproducción no funciona.

Pausa
Pulse [;].
≥ Pulse [;] otra vez o [1] (PLAY) para reiniciar la reproducción.

Búsqueda/Cámara lenta
HDMI IN

Cable HDMI

Altavoces multicanal

HDMI IN

Amplificador/Receptor

Cable HDMI

HDMI OUT

Conecte el cable de
alimentación de CA por último
A una toma de corriente doméstica
AC IN

Cable de alimentación de CA (incluido)
≥ Conéctelo cuando haya realizado el resto de conexiones.

Ahorro de energía
Esta unidad consume una pequeña cantidad de energía
aunque esté ajustada en el modo de espera (Accionamiento
rápido : Desactivado, aprox. 0,1 W). Para ahorrar energía
cuando no vaya a utilizar la unidad durante mucho tiempo,
desenchúfela de la toma de corriente.

VQT2J87(ENG)

Búsqueda
Durante la reproducción, pulse [6] o [5].
≥ Música y MP3: La velocidad está fija en un paso.
Cámara lenta
Durante la pausa, pulse [6] o [5].
≥ BD-Video y AVCHD: Sólo dirección en avance [5].
La velocidad aumenta hasta 5 pasos.
≥ Pulse [1] (PLAY) para recuperar la velocidad de
reproducción normal.

Salto
Durante la reproducción o la pausa, pulse [:] o [9].
Salta hasta el título, capítulo o pista que desee reproducir.
≥ Cada pulsación aumenta el número de saltos.

DMP-BDT300_VQT2J87_eng.book 48 ページ

２０１０年１月２６日

火曜日

午後１時５２分

Index
A AC Power Connection . . . . . . . . 14
Angle . . . . . . . . . . . . . . . . . . . . . . 28
Audio
Changing audio . . . . . . . . . . . . 19
Channel . . . . . . . . . . . . . . . . . . 28
Language . . . . . . . . . . . . . . 28, 30
AVCHD. . . . . . . . . . . . . . . . . . . . . 40
B BD-Live . . . . . . . . . . . . . . . . . . . . 21
BD-Video Ratings . . . . . . . . . . . . 30
BONUSVIEW . . . . . . . . . . . . . . . . 21
C Chapter . . . . . . . . . . . . . . . . . . . . 20
Cleaning . . . . . . . . . . . . . . . . . . . . 4
Connection . . . . . . . . . . . . 8–12, 14
D Deep Color . . . . . . . . . . . . . . . . . 45
Direct Navigator . . . . . . . . . . . . . 19
DivX . . . . . . . . . . . . . . . . . . . . 22, 40
DLNA . . . . . . . . . . . . . . . . . . . . . . 26
DNS Server . . . . . . . . . . . . . . . . . 33
Dolby Digital . . . . . . . . . . . . . 31, 38
Dolby Digital Plus. . . . . . . . . 31, 38
Dolby TrueHD . . . . . . . . . . . . 31, 38
DTS . . . . . . . . . . . . . . . . . . . . 31, 38
DTS-HD . . . . . . . . . . . . . . . . . 31, 38
DVD-Video Ratings. . . . . . . . . . . 30
F Finalize . . . . . . . . . . . . . . . . . . . . . 7
Firmware update. . . . . . . . . . . . . 17
Frame-by-frame . . . . . . . . . . . . . 19
H HDMI . . . . . . . . . . . . . . . . . . . . 8, 10

I IP address. . . . . . . . . . . . . . . . . . 33
J JPEG . . . . . . . . . . . . . . . . . . . 24, 40
L LAN . . . . . . . . . . . . . . . . . . . . . . . 12
Language
Audio . . . . . . . . . . . . . . . . . 28, 30
Menu . . . . . . . . . . . . . . . . . . . . 30
On-screen . . . . . . . . . . . . . . . . 31
Soundtrack . . . . . . . . . . . . . . . . 28
Subtitle . . . . . . . . . . . . . . . . 28, 30
Local storage . . . . . . . . . . . . . . . 45
M MPEG2 . . . . . . . . . . . . . . . . . . . . 40
MP3 . . . . . . . . . . . . . . . . . . . . 25, 40
N Network
Connection . . . . . . . . . . . . . . . . 12
Setting . . . . . . . . . . . . . . . . 15, 33
O Off Timer . . . . . . . . . . . . . . . . . . . 33
On-screen Language . . . . . . . . . 31
P Picture-in-picture . . . . . . . . . . . . 21
Playback
AVCHD . . . . . . . . . . . . . . . . . . 19
DivX . . . . . . . . . . . . . . . . . . . . . 19
JPEG . . . . . . . . . . . . . . . . . . . . 24
MPEG2 . . . . . . . . . . . . . . . . . . 19
MP3 . . . . . . . . . . . . . . . . . . . . . 25
Playlists . . . . . . . . . . . . . . . . . . . 18
Pop-up menu . . . . . . . . . . . . . . . 19
Proxy Server. . . . . . . . . . . . . . . . 33
P4HD . . . . . . . . . . . . . . . . . . . . . . 45

Q Quick Start . . . . . . . . . . . . . . . . . 33
R Random play . . . . . . . . . . . . . . . 29
Re-master . . . . . . . . . . . . . . . . . . 29
Remote control . . . . . . . . . 4, 5, 17
Repeat play . . . . . . . . . . . . . . . . 29
Restore Default Settings. . . . . . 33
Resume play function . . . . . . . . 19
S SD card . . . . . . . . . . . . . . . . . . 7, 21
Setup menu . . . . . . . . . . . . . . . . 30
Slideshow. . . . . . . . . . . . . . . . . . 24
Slow-motion . . . . . . . . . . . . . . . . 19
Soundtrack. . . . . . . . . . . . . . . . . 28
Status Message . . . . . . . . . . . . . 19
Still picture . . . . . . . . . . . . . . . . . 24
Subtitle . . . . . . . . . . . . . . . . . . . . 28
U USB device. . . . . . . . . . . . . . . . . . 7
V VIERA CASTTM . . . . . . . . . . . . . . 25
VIERA LinkTM
“HDAVI ControlTM” . . . . . . . . . . 27
W Wireless LAN . . . . . . . . . . . . . . . 12
X x.v.ColorTM . . . . . . . . . . . . . . . . . 45
24p . . . . . . . . . . . . . . . . . . . . 29, 32
3D . . . . . . . . . . . . . . . . . . . . . . . . 23

Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please
contact your local authorities or dealer and ask
for the correct method of disposal.
(Inside of product)

Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
C Panasonic Corporation 2010
Printed in China

Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca

VQT2J87
F0110SK0

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Trapped                         : False
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Modify Date                     : 2010:04:07 17:06:07-07:00
Create Date                     : 2010:01:18 17:27:32+09:00
Metadata Date                   : 2010:04:07 17:06:07-07:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:6b679e4f-0569-4daf-bebb-9cc9fed381e1
Instance ID                     : uuid:54328aed-d099-4002-a80c-fc43310c44f4
Has XFA                         : No
Page Count                      : 49
Page Layout                     : SinglePage

EXIF Metadata provided by EXIF.tools

Panasonic DMP BDT350 User Manual To The 718bbbb5 0412 4e12 88c1 5d5b382e2e85

Navigation menu

Versions of this User Manual:

Views

Navigation