Panasonic NV HV60 HV60GL_GN User Manual To The A2388f8f D171 4299 A4c9 3c498b833a61
User Manual: Panasonic NV-HV60 to the manual
Open the PDF directly: View PDF 
.
Page Count: 24
| Download | |
| Open PDF In Browser | View PDF |
NV-HV60GL_GN.book 1 ページ ２００３年２月３日 月曜日 午後３時３２分 Video Cassette Recorder Model No. NV-HV60 Series Operating Instructions Contents Warning and Important Information Page 2 Controls and Components 3 Connections 5 Tuning the TV to Your VCR 6 Storing TV Broadcasts in Your VCR 7 Setting the Clock of Your VCR 9 Settings Using the On Screen Display 10 Option Setting 11 Playback 12 Recording 13 Timer Recording 16 Search Functions 19 Before Requesting Service 21 Specifications 23 Before attempting to connect, operate or adjust this product, please read the instructions completely VQT0B18 NV-HV60GL_GN.book 2 ページ ２００３年２月３日 月曜日 午後３時３２分 Cautions before you operate this VCR Avoid: • Humidity and dust. • Covering the ventilation holes with soft materials such as cloth or paper. • Extreme heat such as direct sunlight. • Magnets or electromagnetic objects. • Touching internal parts of the VCR. • Water or some other liquid. • Lightning. (Disconnect the aerial plug from the VCR during lightning storms.) • Anything heavy on the VCR. • Connecting or handling the equipment with wet hands. • Using a cell phone near the VCR because doing so may cause noise to adversely affect the picture and sound. Warning and Important Information As this equipment gets hot during use, operate it in a well ventilated place; do not install this equipment in a confined space such as a book case or similar unit. WARNING: To reduce the risk of fire, electric shock or product damage, do not expose this equipment to rain, moisture, dripping or splashing and ensure that no objects filled with liquids, such as vases, shall be placed on the equipment. Important Your attention is drawn to the fact that the recording of pre-recorded tapes or discs or other published or broadcast material may infringe copyright laws. Do: • Wipe the VCR with a clean and dry cloth. • Install the VCR in a horizontal position. • Keep the VCR, TV and other equipment switched off until you have finished all connections. For your safety Do not remove outer cover. Touching internal parts of the VCR is dangerous, and may seriously damage it. To prevent electric shock, do not remove cover. There are no user serviceable parts inside. Refer all servicing to qualified service personnel. Condensation may form in the following cases: • The VCR is brought from cold surroundings into a well-heated room. • The VCR is suddenly brought from cool surroundings, such as an air-conditioned room or car, to a place which is hot and humid. Inserting Remote Control Batteries Insert the batteries with the polarity (+ and -) correctly aligned. Note: • In any of the above-mentioned conditions, do not operate the VCR for at least 1 hour. This VCR is not equipped with a dew sensor. Press [VCR-ON/OFF] (1) to switch the VCR from on the standby mode or vice versa. In the standby mode, the VCR is still connected to the mains. Notes: The service life of the batteries is approximately 1 year. However, it varies considerably depending on the frequency of use. • When they are exhausted, replace them with two AA, UM3, or R6 size batteries. • When the batteries are exhausted, remove them immediately and dispose them correctly. • Make sure that the batteries are inserted with the polarity (+ and -) correctly aligned. • Do not mix old battery with new battery. • Do not mix different battery types, i.e. Alkaline and Manganese. • Do not use rechargeable (Ni-Cd) batteries. • Do not heat or short-circuit the batteries. • When you do not use the remote control for a long time, take out the batteries and store them in a cool, dry place. NV-HV60GL: Australian model NV-HV60GN: New Zealand model Plug in Auto Tuning (NV-HV60GN only) (Setting image illustration) (1) (2) AUTO TUNING IN PROGRESS, PLEASE WAIT. CH 22 SEARCH 21 END: MENU ¢ (4) (1) Connect the aerial cable. (2) Connect the mains lead. (3) Press [VCR-ON/OFF] (1). (4) Plug in Auto Tuning is completed. ¢ On Screen Display All broadcasting stations that can be received in the area are automatically tuned and stored in memory. • Do not turn off the VCR halfway. (See page 7.) (3) 2 NV-HV60GL_GN.book 3 ページ ２００３年２月３日 月曜日 午後３時３２分 Controls and Components (1) (38) (29) (39) (40) (32) (19) EJECT CH TAPE REFRESH Í/I PICTURE MODE TIMER REC REC/OTR (47) (46) PROG PROG TIMER GUIDE PLAY CHECK (45) (5) (44) (48) (43) (42) JET REW / / STOP PLAY (41) (26) (8) (24) (9) (25) (49)(50) (51) VIDEO 2 2 IN AC IN ~ L 2 AUDIO R 2 2 OUT IN (AV1) RF OUT (54) (53) (52) (36) REPEAT INPUT SELECT OSD (1) Í (2) 1 2 3 + 4 5 6 – 7 8 9 AV 0 (35) (34) (33) TRACKING/V-LOCK CH (32) VOLUME (3) (4) (5) (6) NAVI + – INDEX PICTURE MODE PROG PLAY REC MENU JET REW (7) (8) (9) (10) (11) (12) (13) (14) (15) OK (31) (30) (29) (28) (27) (26) (25) MENU JET REW (37) OK (24) (23) VCR TV VCR TV 1 2 + 3 4 + + DATE CH ON OFF PROG / CHECK GUIDE SPEED TIMER CANCEL DISPLAY RESET AUDIO – – – (22) (21) (20) (19) (18) (17) (16) 3 1 + 2 3 4 + + NV-HV60GL_GN.book 4 ページ ２００３年２月３日 月曜日 午後３時３２分 VCR Operation (38) [TAPE REFRESH] • Set [VCR/TV] switch (22) to [VCR]. (39) Cassette compartment (1) [VCR-ON/OFF] (40) [EJECT] (2) [Numeric] (41) [REC/OTR] To select the programme positions (1-99). • Example: 9: (42) VCR display 9 19: (43) Infra-red Remote Control Receiver window 1 9 (44) [TIMER CHECK] (45) [PROG GUIDE] To enter numbers for various settings. (3) [AV] (46) AUDIO IN sockets (AV 2) (4) [NAVI] (47) VIDEO IN socket (AV 2) (5) [PROG PLAY] (48) AC Input socket (6) No function (49) VIDEO IN socket (AV 1) (7) [MENU] (50) VIDEO OUT socket (8) [Rewind] (51) RF IN socket (9) [Stop] (52) RF OUT socket (10) [ON] (53) AUDIO OUT sockets (11) [CH] (54) AUDIO IN sockets (AV 1) (12) [DATE] TV Operation using the remote control (13) [GUIDE] • Set [VCR/TV] switch (22) to [TV]. (14) [PROG/CHECK] You can use [TV-ON/OFF] (1)*1, [Numeric] (2)*2, [AV] (3)*3, [VOLUME] (31)*4 and [Channel] (32)*5 on the remote control for your TV operation. (See page 5.) (15) [CANCEL] (16) [DISPLAY] (17) [RESET] To reset the tape counter (elapsed time) to [0:00.00]. • The tape counter is automatically reset to [0:00.00] when a video cassette is inserted. *1 (18) [AUDIO] (19) [TIMER (REC)] (20) [SPEED] (21) [OFF] (22) [VCR/TV] switch *2 To switch the TV on from standby mode (OFF) or vice versa. On some TVs it is only possible to switch the TV to standby mode (OFF) with this button, but not on. In this case, try to turn the TV on with one of the following buttons: [Numeric] (2) [AV] (3) [Channel] (32) To select the programme positions (1-99) on the TV. To select desired AV input on the TV. *4 To adjust the volume of the TV. *5 To select the desired programme position (TV station) on the TV. (23) [OK] *3 (24) [Fast Forward] (25) [Play] (26) [JET REW] (27) [REC] (28) [Pause/Slow] (29) [PICTURE MODE] (30) [INDEX] (31) [VOLUME] (32) [Channel]/[TRACKING/V-LOCK] (33) [INPUT SELECT] (34) [REPEAT] (35) [OSD] (36) Infra-red transmitter (37) [Cursor] 4 NV-HV60GL_GN.book 5 ページ ２００３年２月３日 月曜日 午後３時３２分 Setting the Remote Control to Operate Your TV Connections You can operate the TVs of the manufacturers listed below with the remote control after setting it. This section shows you how to connect the VCR to an aerial, TV, etc. This setting procedure allows you to operate the TVs of some manufacturers using the supplied remote control. When the VCR is turned on after unpacking and connecting the aerial cable and the mains lead, Plug in Auto Tuning starts automatically. (NV-HV60GN only) Preparation • Set [VCR/TV] switch (22) to [TV]. Basic Connections Operations 1 Find the manufacturer number of your TV while referring to the following table. The following connections are required to record and play back the video cassette through the TV. 2 While holding down [TV-ON/OFF] (1) on the remote control, use [Numeric] (2) to enter the manufacturer number. This completes the settings for the TV manufacturer. • Be sure to enter the number in two digits. Example: 1 ) 01 (1) (3) (4) 3 To confirm the correct settings were made, check whether the TV can be operated properly. • When a manufacturer has multipled numbers in the following table, try entering other numbers if the TV operations cannot be performed properly, and then select the optimal number. VIDEO 2 L 2 AUDIO (6) Panasonic/National 01-04 SONY 05 TOSHIBA 06 JVC 07 HITACHI 08 R 2 2 OUT IN (AV1) RF OUT (5) ¢ (1) (2) (3) (4) (5) (6) AC Input socket (48) ¢ To mains supply Aerial (Not supplied) TV Set (Not supplied) Aerial Connector RF IN socket (51) RF OUT socket (52) Connection to a TV using the Audio/Video Input Socket: Set the RF output channel of the VCR to [ss] (RF OFF) when the VCR is connected to the TV via the Audio/Video cable. (See page 6.) List of TVs Compatible with the VCR Remote Control [Code] 2 IN AC IN ~ Notes: • If you are using a Panasonic TV, this setting has already been made, and so you do not need to perform the above setting procedure. However, this remote control may not work with some Panasonic TVs. • Some TV models cannot be operated using this remote control (including all TVs non-remote compatible). [Brand] (2) (1) (3) (2) (4) (5) (6) (7) VIDEO 2 2 IN AC IN ~ L 2 AUDIO MITSUBISHI 09, 10 SHARP 11 PHILIPS, SAMSUNG 12 NEC 13 SANYO 14 GOLDSTAR/LG 15, 16 SAMSUNG 17,18 SANYO 19 (10) R 2 2 OUT IN (AV1) RF OUT (9) (8) ¢ (1) (2) (3) (4) (5) (6) (7) (8) (9) VIDEO OUT (50)/ AUDIO OUT (53) (10)AC Input socket (48) ¢ To mains supply Aerial (Not supplied) TV Set (Not supplied) Aerial Connector VIDEO IN AUDIO IN AV Cable (Supplied) RF IN socket (51) RF OUT socket (52) Connection to a Stereo Amplifier: (2) VIDEO 2 ¢ AC IN ~ L 2 AUDIO R 2 IN (AV1) OUT (3) (1) (5) (4) (1) (2) (3) (4) (5) 5 Stereo amplifier (Not supplied) REC PLAYBACK AUDIO OUT (53) AUDIO IN (54) ¢ Audio Cables (Not supplied) NV-HV60GL_GN.book 6 ページ ２００３年２月３日 月曜日 午後３時３２分 To Change the RF output Channel Tuning the TV to Your VCR In some rare cases after tuning the TV to your VCR, interference may be visible on the picture. To get rid of this interference, you can manually adjust the RF output channel a few channels up and down from the current setting. The procedure is described below. The VCR supplies a signal to the TV via the RF coaxial cable on channel AU28-69 or NZ21-69. It is possible to view the video picture on your TV in the same way that you watch TV broadcasts. If you have connected the VCR to the TV through the Audio/ Video input sockets, then you do not need to follow the procedure below. Operations 1 Hold down [MENU] (7) for 5 seconds or more. • The VCR display changes as shown below and the VCR picture on the TV displays this pattern. For NV-HV60GL/Australia Preparation • Turn on the TV and the VCR. Operations 1 Hold down [MENU] (7) for 5 seconds or more. Example for NV-HV60GL 2 Set the TV to an unused position which you wish to use for your video playback. • Tune the TV until the display shown on the right appears on Panasonic VCR the screen. (Please refer to the TV manufacturers operating instructions regarding tuning.) END: MENU Panasonic VCR END: MENU 3 Press [MENU] (7). 2 Enter the desired channel number (AU28-69, NZ21-69) by [Numeric] (2) or [Channel] (32). • Ensure that [VCR/TV] switch (22) is set to [VCR]. • Set the RF output channel of the VCR to [ss] (RF OFF) when the VCR is connected to the TV via the Audio/Video cable. Press [Channel] (32) to display [ss]. For NV-HV60GN/New Zealand When the VCR is turned on after unpacking and connecting the aerial cable and the mains lead, Plug in Auto Tuning starts automatically. Notes: • If the VCR is turned on with the aerial not connected, all channels are skipped. Therefore, firmly connect the aerial and then turn the VCR off and on again to execute Plug in Auto Tuning. • When Auto Tuning is cancelled halfway, Auto Tuning is not executed even if the VCR is turned off and then turned on again. In this case, see page 7 [To Restart Plug in Auto Tuning]. NV-HV60GL: SEARCH 21 END: MENU During Plug in Auto Tuning 69 ss NV-HV60GN: 21 69 ss (RF OFF) Operations 1 Set the TV to an unused position which you wish to use for your video playback. • Tune the TV until the display shown below appears on the screen. (Please refer to the TV manufacturers operating instructions regarding tuning.) CH 22 … 28 (RF OFF) Preparation • Turn on the TV and the VCR. AUTO TUNING IN PROGRESS, PLEASE WAIT. Example for NV-HV60GN • It is also possible to select by pressing [Numeric] (2) Example: 28: 2 8 3 Press [MENU] (7) to finish the setting mode. 4 Retune your TV to the new RF channel for the VCR. Note: • Even if the RF output channel has been changed, it is not necessary to perform Auto Tuning. AUTO TUNING IS COMPLETED. END: MENU After Plug in Auto Tuning 2 Press [MENU] (7). 6 NV-HV60GL_GN.book 7 ページ ２００３年２月３日 月曜日 午後３時３２分 Auto Tuning Using the On Screen Display Storing TV Broadcasts in Your VCR Introduction The VCR is tuned automatically by Plug in Auto Tuning. However, Auto Tuning using the On Screen Display should be performed according to the following method if necessary. The VCR is fitted with its own tuner (just like a normal TV) and can be preset to receive up to 99 TV broadcast stations. Preparations • Confirm that the TV is on and the VCR viewing channel is selected. • Turn on the VCR and select any programme position except A1 or A2. • Set [VCR/TV] switch (22) to [VCR]. Pre-programmed TV Channels (NV-HV60GL/Australia) The local TV broadcast channels 2, 7, 9, 10 and 28 are factory-preset in this VCR. That is, if you can receive television broadcasts on VHF channels 2, 7, 9, 10 and UHF channel 28, these are already tuned on the programme positions with the matching numbers. However, it is possible to cancel these settings and tune the local TV broadcast channels to any desired programme position. Operations 1 Press [MENU] (7) to display the Main menu on the TV screen. MENU CLOCK SET TUNER PRESET SYSTEM OPTION Plug in Auto Tuning (NV-HV60GN/New Zealand) , OK SELECT : :MENU END When the VCR is turned on after connecting the aerial cable and the mains lead, Auto Tuning starts. 2 Press [Cursor] (37) (34) to select [TUNER PRESET] then press [OK] (23). MENU CLOCK SET TUNER PRESET SYSTEM OPTION , OK SELECT : :MENU END AUTO TUNING IS COMPLETED. AUTO TUNING IN PROGRESS, PLEASE WAIT. CH 22 During Plug in Auto Tuning 3 Press [Cursor] (37) (34) to select [AUTO TUNE] then press [Cursor] (37) (21) to start the Auto Tuning. • When Auto Tuning is completed, the On Screen Display disappears and programme position 1 is selected. END: MENU SEARCH 21 END: MENU After Plug in Auto Tuning Auto tuning searches for TV stations from VHF minimum to UHF maximum and memorizes every tuned programme position. • If you turn the VCR off during Auto Tuning, Auto Tuning will stop halfway. • If the VCR starts playback during Auto Tuning, Auto Tuning will stop halfway. SELECT: [OFF] [3] END :MENU AUTO TUNING IN PROGRESS, PLEASE WAIT. CH 1 SEARCH 100 END: MENU The number displayed here is the number of channels still to be auto tuned. To Cancel Auto Tuning Mid-Operation: Press [MENU] (7) during Auto Tuning. Auto Tuning is cancelled. To Restart Plug in Auto Tuning: 1 Press [EJECT] (40) and remove the video cassette. Channels that can be Received 2 Keep both [Channel] (32) I and J on the VCR pressed simultaneously for 3 seconds or more during the VCR on. • The channel displayed on the VCR display disappears for a moment then changes to 1. Disappears TUNER PRESET CH 1 CLEAR AUTO TUNE SEARCH FINE VHF UHF CATV NV-HV60GL 0-12 28-69 45-470MHz NV-HV60GN 1-11 21-69 45-470MHz Notes: • Auto Tuning searches for TV stations from VHF minimum to UHF maximum and memorizes every tuned programme position. Other programme positions are skipped. • Auto Tuning takes five or more minutes to complete its search. • If the VCR is not correctly tuned by Auto Tuning, follow the procedure on page 8. 1 3 Disconnect the mains lead and then reconnect it. 4 Turn off the VCR and then turn it on. • Auto Tuning commences. If Auto Tuning stops halfway by turning the VCR off or a power failure: 1 Disconnect the mains lead and then reconnect it. 2 Turn off the VCR and then turn it on. • Auto Tuning commences. 7 NV-HV60GL_GN.book 8 ページ ２００３年２月３日 月曜日 午後３時３２分 Manual Tuning Procedure Direct Tuning 1 Press [MENU] (7) to display the Main menu on the TV screen. Follow steps 1 to 3 of Manual Tuning Procedure. 2 Press [Cursor] (37) (34) to select [TUNER PRESET] then press [OK] (23). 5 Press [Cursor] (37) (34) select [SEARCH]. 4 Confirm that [CLEAR] is set to [OFF]. 6 Press [Numeric] (2) to enter the number of the desired programme position. 3 Press [Cursor] (37) (34) to select [CH] then select the channel number you want to tune by pressing [Cursor] (37) (21). For the 5A and 9A channels, input the following numbers: 90 for CH-5A, 91 for CH-9A. (Example for NV-HV60GL.) • For other channels that require tuning, repeat steps 3-6. 4 Confirm that [CLEAR] is set to [OFF]. 5 Press [Cursor] (37) (34) to select [SEARCH] then press [Cursor] (37) (21) to start the Manual Tuning. • If the desired TV station has not been tuned, press [Cursor] (37) (21) again. • Press [MENU] (7) and repeat steps 3-5 for each programme position you want to tune to a station. 7 Press [MENU] (7) twice to exit the On Screen Display. Fine Tuning Procedure Follow steps 1 to 3 of Manual Tuning Procedure. 4 Press [Cursor] (37) (34) to select [FINE] then press [Cursor] (37) (21) to obtain the best tuning condition. • Press [OK] (23) to return the tuning to its former state. CH 2 CH 2 SEARCH END: MENU SEARCH 74 END: MENU 6 Press [MENU] (7) three times to exit the On Screen Display. CH 2 FINE : AFC: OK END: MENU 5 Press [MENU] (7) to exit the On Screen Display. Blanking of Unused Programme Positions Follow steps 1 to 3 of Manual Tuning Procedure. 4 Press [Cursor] (37) (34) to select [CLEAR] then press [Cursor] (37) (21) to select [ON]. • Repeat steps 3-4 for other unused programme positions to skip during the selection of programme positions. • To cancel the blanking of a programme position select that programme position then set [CLEAR] to [OFF]. 5 Press [MENU] (7) twice to exit the On Screen Display. 8 NV-HV60GL_GN.book 9 ページ ２００３年２月３日 月曜日 午後３時３２分 Time Reset Function Setting the Clock of Your VCR If the clock is less than two minutes slow or fast, it can easily be reset to the proper time. In the event of a power failure, the clock will operate on its back up system for a minimum of 3 years. After 3 years, clock back up in the event of a power failure can only be guaranteed for maximum of 1 hour. Example: Resetting the clock to 12:00.00 1 Press [MENU] (7) to display the Main menu on the TV screen. Preparations • Confirm that the TV is on and the VCR viewing channel is selected. • Turn on the VCR. 2 Press [Cursor] (37) (34) to select [CLOCK SET] then press [OK] (23). 3 When the current clock displays on the VCR is between 11:58.00 and 12:01.59, press [MENU] (7) as soon as you hear the 12:00.00 signal. This resets the time to 12:00.00. • Example: Date; 16 October, 2005 Time; 20:15 Operations 1 Press [MENU] (7) to display the Main menu on the TV screen. MENU CLOCK SET TUNER PRESET SYSTEM OPTION , OK SELECT : :MENU END 2 Press [Cursor] (37) (34) to select [CLOCK SET] then press [OK] (23). MENU CLOCK SET TUNER PRESET SYSTEM OPTION , OK SELECT : :MENU END 3 Set each item by pressing [Cursor] (37) (341). Press [Cursor] (37) (2) to return to the previous item. At the set time (H:M) point: • When it is kept pressed, the indication changes in 30 minute steps. • There is no need to press [Cursor] (37) (1). CLOCK SET Y 2005 M 1 D 1 H:M 0:00 SELECT: START:MENU 4 Press [MENU] (7). • The clock starts. 9 NV-HV60GL_GN.book 10 ページ ２００３年２月３日 月曜日 午後３時３２分 3 Programme position Settings Using the On Screen Display 4 Tape running display Stop, Eject Preparations • Confirm that the TV is on and the VCR viewing channel is selected. • Turn on the VCR. • Set [VCR/TV] switch (22) to [VCR]. To Set the Colour TV System 1 Press [MENU] (7) to display the Main menu on the TV screen. 2 Press [Cursor] (37) (34) to select [SYSTEM] then press [OK] (23). 6 Fast Forward, Cue, Index Search 9, Jet Search 5 5 SYSTEM Playback 1 AUTO PAL NTSC B/W Recording ¥ SELECT: END :MENU 3 Press [Cursor] (37) (34) to select [AUTO]. • The VCR automatically distinguishes between PAL or NTSC signals. If the picture lacks of colour during AV external recording or playback, set to [PAL] or [NTSC]. • When you want to record or play back in black and white, set to [B/W]. ;¥ Repeat playback R1 Information Display Present time 17:24 Tape counter -2:35.47 Remaining tape time To Make Various Indicators Appear On Screen Display REMAIN 2:34 Index Search 45 6 0:00.22 SP PAL Recording pause 5 Present time/Tape counter/Remaining tape time/Index Search/OTR indication/JET Rewind 4 Press [MENU] (7) twice to exit the On Screen Display. At a press of [OSD] (35), the 123 following indications appear on CH 1 the TV screen. STEREO LR • Set [OSD] to [AUTO]. (See page 11.) • The display is released automatically after 5 seconds. Rewind, Review, Index Search:, Jet Search6, Jet Rewind 7 8 S 01 OTR indication OTR 60 JET Rewind J . REW 6 Tape speed indicator (SP/LP/EP) 7 Cassette-in indicator STANDARD 9 8 Colour system indicator Any selected colour TV system except [AUTO] appears on screen display. (See the To Set the Colour TV System.) 1 Audio Output Mode Indicators At each press of [AUDIO] (18), the selected sound mode is indicated with Left (L) and Right (R). 9 Picture mode indicator At each press of [PICTURE MODE] (29), the selected picture mode is set and following picture mode indicators appear. Stereo: Both the Left (L) and Right (R) Indicators appear. Left: The Left (L) Indicator appears. Right: The Right (R) Indicator appears. Normal:Neither the Left (L) nor Right (R) Indicator appears. • At every push of this button, the audio output mode changes as follows. Example: STANDARD: For TV programme recorded DYNAMIC: For Scenery, Sports SOFT: For Rental soft tape CARTOON: For Cartoon During playback: Stereo # L # R # Normal audio track # Stereo Note: • The On Screen Display may be disturbed or disappeared during special playback. While the broadcast signals are being received: Stereo # L # R # Normal # Stereo 2 STEREO or BILINGUAL indicator (NV-HV60GL) When receiving a TV programme, the type of sound system in which it is broadcast is automatically indicated. STEREO, M1 and M2 Indicator (NV-HV60GN) When receiving a TV programme with the Stereo, Bilingual or NICAM sound system, the type of sound system in which it is broadcast is automatically indicated. STEREO:When receiving a Stereo/NICAM stereo broadcast. M1/M2: When receiving a Bilingual/NICAM dual-sound broadcast. M1: When receiving a NICAM monaural broadcast. • To hear stereo performance connect as shown on page 5 to a TV or Stereo Amplifier with left and right audio inputs. 10 NV-HV60GL_GN.book 11 ページ ２００３年２月３日 月曜日 午後３時３２分 DELETE NAVIDATA: To delete all the Jet Navigator data stored in the VCR memory. • Press [Cursor] (37) (21) to select [OK] then press [OK] (23) to do the deletion. Option Setting MENU CLOCK SET TUNER PRESET SYSTEM OPTION , OK SELECT : :MENU END OPTION TAPE SELECT [AUTO] NTSC INPUT SELECT [AUTO] NTSC PB SELECT [onPALTV] JET NAVIGATOR [OFF] DELETE NAVIDATA [NO] OSD REC [OFF] OSD [AUTO] MONAURAL [ON] END :MENU SELECT: NO: Initially set at this position. END: It is done to delete all the Jet Navigator data. OSD REC: To set the conditions for the OSD Recording function. • Press [Cursor] (37) (21) to select [ON] or [OFF]. 1 Press [MENU] (7) to display the Main menu on the TV screen. OFF: Initially set at this position. ON: This setting enables OSD Recording. (See page 14.) If you select [ON], [JET NAVIGATOR] is set to [OFF] automatically. 2 Press [Cursor] (37) (34) to select [OPTION] then press [OK] (23). 3 Press [Cursor] (37) (34) to select the desired field. TAPE SELECT: OSD: To select the On Screen Display mode. • Press [Cursor] (37) (21) to select [AUTO] or [OFF]. To select the corresponding video cassette tape length to display the approximate remaining tape time. AUTO: To make various indicators appear On Screen Display for 5 seconds press [OSD] (35). OFF: No indications appear. • Press [Cursor] (37) (21) to select the corresponding video cassette tape length. AUTO: The VCR automatically distinguishes E30, -60, -90, -120, -180 and -240 tapes. E195: For E195 tape E260: For E260 tape E300: For E300 tape MONAURAL: To select the sound mode. (For NV-HV60GN only) • Press [Cursor] (37) (21) to select [ON] or [OFF]. ON: To record the normal sound during a NICAM broadcast or if the stereo sound is distorted due to inferior reception conditions. OFF: Normally set at this position. • The remaining tape time may not be displayed correctly depending on the tape used. NTSC INPUT SELECT: To select the colour TV system used to record NTSC signals. 4 Press [MENU] (7) twice to exit the On Screen Display. • Press [Cursor] (37) (21) to select [AUTO]. Allows NTSC [4.43] or [3.58] signals to be distinguished automatically. • If the tape has not recorded correctly, select 4.43 or 3.58. 4.43: When recording NTSC 4.43 signals. 3.58: When recording NTSC 3.58 signals. • Some programmes on NTSC 3.58 system cannot be recorded correctly at this position. NTSC PB SELECT: To select the colour TV system of the TV used to play back a tape recording NTSC signals. • Press [Cursor] (37) (21) to select the desired position according to the colour TV system of the TV. on PAL TV: For TVs that can receive PAL signals. 4.43: For TVs that can receive NTSC 4.43 signals. 3.58: For TVs that can receive NTSC 3.58 signals. JET NAVIGATOR: To set the conditions for the Jet Navigator Function. • Press [Cursor] (37) (21) to select [ON] or [OFF]. OFF: Initially set at this position. ON: Jet Navigator function works. If you select [ON], [OSD REC] is set to [OFF] automatically. 11 NV-HV60GL_GN.book 12 ページ ２００３年２月３日 月曜日 午後３時３２分 Notes: • JET SEARCH, cue, review or slow playback will be automatically cancelled after 10 minutes, and still playback after 5 minutes. • During playback function other than normal playback, horizontal noise bars may appear in the picture, the colour of the picture may be unstable, or the picture may be otherwise distorted. • When you play back a tape recorded in the LP mode, the picture may be in black and white. • When you play back a tape recorded in the EP mode, the picture and the sound may be unstable. However, these are not malfunctions. Playback Preparations • Confirm that the VCR is on. • Confirm that the TV is on and the VCR viewing channel is selected. • Insert a recorded video cassette. • Set [VCR/TV] switch (22) to [VCR]. For Normal Playback: Press [Play] (25). To Play back S-VHS Cassette Tape (SQPB=S-VHS Quasi Playback) For Cue or Review Playback: During playback, tap [Fast Forward] (24) or [Rewind] (8). • To return to normal playback, press [Play] (25). • If you press and hold down [Fast Forward] (24) or [Rewind] (8), cue or review playback continues for as long as you keep the button pressed, and operation returns to normal playback when the button is released. It is also possible to play back tapes recorded in the S-VHS system. • Some picture noise may occur depending on the type of tape used. • It is not possible to fully obtain the high resolution that SVHS is capable of. • It is not possible to record in the S-VHS system with this VCR. For High speed Cue or Review Playback (JET SEARCH): During playback, tap [Fast Forward] (24) or [Rewind] (8) twice. To Play Back a Recorded Part Repeatedly Press [REPEAT] (34). The [R] indication appears on the VCR display. • A recorded part on the tape must be at least 15 minutes long. • When recording over the same location on a tape, it may not function correctly. For Still Playback: During playback, press [Pause/Slow] (28). • To return to normal playback, press [Play] (25) or [Pause/Slow] (28). For Slow Playback: During playback, keep [Pause/Slow] (28) pressed for 2 seconds or more. • To return to normal playback, press [Play] (25). To Cancel the Repeat Playback Mode: Press [Stop] (9). NTSC Playback Fast-forwarding or Rewinding the Tape: Press [Fast Forward] (24) or [Rewind] (8) in the stop mode. • To stop fast-forwarding or rewinding, press [Stop] (9). Tapes recorded in the NTSC system can be played back with this VCR via a PAL system TV. • Select [NTSC PB SELECT] from the On Screen Display according to the colour TV system of the TV. (See page 11.) • NTSC 3.58 recording requires [NTSC INPUT SELECT] to be in the AUTO or 3.58 position (see page 11), however if [NTSC INPUT SELECT] is in this position when recording a NTSC 3.58 signal, no colour is available for the PAL TV. Once the recording is completed, you then need to select [on PAL TV] to view the recording in colour on PAL TV. • On some TVs, the playback picture may roll up or down. If your TV has V-HOLD control or equivalent adjustment function, use it to adjust the picture. To Obtain a Higher Speed Rewind (Jet Rewind): Press [JET REW] (26). The [J . REW] indication appears on the TV screen and VCR displays channel position (except when the remaining tape time indication appears). • Depending on a cassette or an operating condition, the rewind speed may change somewhat. • The tape counter is reset to [0:00.00] when the tape is rewound to the beginning. To Stop Playback Press [Stop] (9). Note for only NTSC Playback on PAL system TV This function is designed to allow only the playback of tapes recorded by NTSC signals on a PAL system TV. The NTSC signal is not completely converted to a PAL signal. For this reason, images play back by this function cannot be recorded correctly on other VCRs. 12 NV-HV60GL_GN.book 13 ページ ２００３年２月３日 月曜日 午後３時３２分 To Playback in the Desired Picture Quality (Picture Mode) Recording This function reproduces optimum playback picture from various kind of recorded tapes and contents. Preparations • Confirm that the VCR is on. • Confirm that the TV is on and the VCR viewing channel is selected. • Set [VCR/TV] switch (22) to [VCR]. Press [PICTURE MODE] (29) and select the corresponding Picture Mode as follows. Example: Mode STANDARD DYNAMIC SOFT CARTOON Characteristic Example for Purpose Normal TV Programme recorded Clear & Vivid Scenery, Sports Mild Rental soft tape Delicate Cartoon Operations 1 Insert a video cassette with an intact erasure prevention tab. • If it has already been inserted, press [VCR-ON/OFF] (1) to turn the VCR on. 2 Select the TV station using [Channel] (32). • It is also possible to select by pressing [Numeric] (2). • Pressing [PICTURE MODE] (29) once makes the On Screen Display appears. After that, pressing it repeatedly changes the indication in the following order: 3 Press [REC] (27) ([REC/OTR] (41)) to start recording. 4 Press [Stop] (9) to stop recording. STANDARD (Initial Setting) # DYNAMIC # SOFT # CARTOON # STANDARD (Initial Setting) To Select the Desired Tape Speed Convenient Automatic Functions Press [SPEED] (20) before recording. • SP provides standard recording time, optimum picture and sound quality. LP provides double recording time with slightly reduced picture and sound quality. EP provides triple recording time with slightly reduced picture and sound quality. When you play back a tape recorded in the EP mode, the monaural sound may be unstable. VCR Auto Power On When you insert a video cassette, the VCR switches on automatically. Auto Playback Start When you insert a video cassette with a broken erasure prevention tab, playback starts automatically without press [Play] (25). VCR-off Playback When the VCR is off, the inserted cassette can be played back by pressing [Play] (25). When you start the recording in the EP mode, [EP] indication on the VCR display flashes for about 8 seconds. Auto Rewind When the tape reaches the end, the VCR automatically rewinds it to the beginning. • This function does not work during timer recording, OTR recording and fast-forwarding. EP mode means Super Long Play (SLP). To Pause Recording Press [Pause/Slow] (28) during recording. Press it again to continue recording. Automatic Switching Off and Ejection When the VCR is switched off, the inserted cassette can be ejected simply by pressing [EJECT] (40). The VCR will eject the cassette and automatically turn itself off again. To View One TV Programme while Recording Another TV Programme To Eject Video Cassette Using the Remote Control After pressing [REC] (27) to start recording, select on your TV the programme position of the TV programme that you want to view. Keep pressing [Stop] (9) for at least 3 seconds. To Prevent Accidental Erasure of Recorded Contents Break out the erasure prevention tab after recording. If you insert a video cassette with a broken out erasure prevention tab and press [REC] (27) ([REC/OTR] (41)), the indication flashes on the VCR display to indicate that recording is not possible. In this case, cover the tab hole with two layers of adhesive tape. 13 NV-HV60GL_GN.book 14 ページ ２００３年２月３日 月曜日 午後３時３２分 To Display the Approximate Remaining Tape Time Important Note for the NICAM System When NV-HV60GN is switched on, the tuner will automatically switch to a NICAM broadcast, if NICAM is being transmitted. At this time the NICAM signal is transmitted on stereo channels only, since the M1 and M2 formats are not yet available. Even if the sound track is MONO, the stereo indicator will appear. The remaining tape time can be displayed in the VCR display. 1 Select [TAPE SELECT] from the On Screen Display and select the corresponding video cassette tape length. See page 11. 2 Press [DISPLAY] (16) repeatedly until the Remaining Tape Time appears on the VCR display. To Record the Present Date and Time (OSD Recording) on the same screen as the picture Clock # Counter # Remaining Tape Time # Clock This function allows you to record the present date and time on the same screen as the picture being recorded. For certain cassettes, the remaining tape time may not be displayed correctly. Operations 1 Set [OSD REC] to [ON]. (See page 11.) To reset the tape counter 2 Press [REC] (27) ([REC/OTR] (41)). Press [RESET] (17) to reset the tape counter (elapsed time) to [0:00.00]. • The tape counter is automatically reset to [0:00.00] when a video cassette is inserted. • The tape counter is reset to [0:00.00] when you operate the Jet Rewind function and the tape is rewound to the beginning. 3 Press [Stop] (9) to stop recording. 20:15.54 16.OCT.2005 Note: • This function is also activated for OTR recording and Timer recording. Notes: • When playing back a cassette recorded in the LP or EP mode, some pictures and sound distortion may occur. However, this is not a malfunction. • The recording pause mode will be automatically cancelled after 5 minutes and return to the stop mode. • The tape recorded in the EP mode on this VCR cannot be played back on the other VCR without EP mode function. • On the other VCR (even with EP mode function), when you play back the tape recorded in the EP mode, the picture and the sound may be distorted. However, this is not a malfunction. • When a video cassette with a broken off erasure prevention tab is inserted, the indication will flash to indicate that recording is not possible even if [REC] (27) ([REC/OTR] (41)) is pressed. To Select the Recording Duration and Perform Timer Recording (OTR Recording) OTR means One-Touch Recording and is called this way, because you can start recording and select the recording duration by repeatedly pressing a single button. This is very convenient, for example when you want to start recording immediately but need to go out or want to go to bed. After the selected recording duration has elapsed, recording stops and the VCR automatically switches off. To Perform an OTR Recording: 1 Display the VCR picture on the TV. 2 Insert a video cassette with an intact erasure prevention tab. 3 Press [Channel] (32) to select the programme position on which the TV programme to be recorded will be broadcast. Recording of Stereo or Bilingual Programmes (NV-HV60GL only) 4 Press [REC/OTR] (41) to start recording. 1 Recording is automatically made in the stereo or bilingual mode. This prevents errors in the selection of the dubbed or the original language. 5 Press [REC/OTR] (41) repeatedly to select the desired recording duration. • Every time you press this button, the recording duration indicated in the VCR display changes in the following order. • For example, if you select [30], the VCR records a programme from that moment for 30 minutes. 2 During playback press [AUDIO] (18) to select the desired sound mode. (See page 10.) The NICAM Broadcast System (NV-HV60GN only) Counter display (normal recording mode) # 30 (min.) # 60 (min.) # 90 (min.) # 120 (min.) # 180 (min.) # 240 (min.) # Counter display (normal recording mode) NV-HV60GN is equipped with the NICAM sound system. NICAM is a 2 channel sound broadcast system to provide either a high quality stereo sound track or 2 independent MONO sound tracks, M1 and M2. NICAM programmes are always accompanied by standard sound broadcasts and you can select the desired sound with [AUDIO] (18) during playback. • The NICAM digital stereo sound can only be recorded on the Hi-Fi audio track. • When NICAM programme is being received, the indicators are lit to inform you the type of broadcast. (See page 10.) • To record the regular sound (ordinary normal sound) on the FM audio tracks when a NICAM programme is received, set [MONAURAL] to [ON]. (See page 11.) • To hear stereo performance connect as shown on page 5 to a TV or Stereo Amplifier with left and right audio inputs. To Stop the OTR Recording Before the End: Press [Stop] (9). Notes: • The OTR function works during normal recording. • When the tape reaches its end during OTR recording, the VCR will turn itself off. 14 NV-HV60GL_GN.book 15 ページ ２００３年２月３日 月曜日 午後３時３２分 Recording from an external source Operations 1 Press [Play] (25) to start playback. This function can be used to make up an edited tape from other recordings or video sources. A new scene can be added to the end of previous one. 2 At the point where you want to join a new scene, press [Pause/Slow] (28) to put it in the still playback mode. 3 Press [REC] (27) to put it in the recording pause mode. Recording VCR (2) (1) 4 Start playback on the source unit and search for the point from which you want to record (copy) onto this VCR. 5 When that point is reached, press [Pause/Slow] (28) again to start recording the new picture and sound from the playback unit. VIDEO 2 Í/I TAPE REFRESH PICTURE MODE L 2 PROG PROG TIMER GUIDE PLAY CHECK AUDIO R 2 IN (AV1) OUT 6 To record (copy) additional scenes, press [Pause/ Slow] (28) to put this VCR in the recording pause mode and then perform above steps 4 and 5 again. (3) 7 At the point where you want to stop recording, press [Stop] (9) to finish recording. (1) AV 1 (VIDEO IN (49)/AUDIO IN (54)) (2) AV 2 (VIDEO IN (47)/AUDIO IN (46)) (3) Other VCR or Video movie camera Notes: • If you leave the VCR in the recording pause mode for more than 5 minutes in step 3 or 6, the VCR automatically switches over to stop mode to protect the video heads. Preparations • Connect a video movie camera or another VCR to this VCR as shown. • Display the VCR picture on the TV. • Insert the cassette on which the copying is to be performed, and make sure that its erasure prevention tab is not broken out. • Select the audio/video source required by pressing [INPUT SELECT] (33) to set A1 or A2. A1: A2: To Delete all of a Cassette’s Contents (Tape Refresh Function) You can delete a cassette contents (the picture, the sound and the Jet Navigator data) all at once. Operations 1 Be sure to set [JET NAVIGATOR] to [ON] when you want to delete all contents of a cassette that is recorded while setting [JET NAVIGATOR] to [ON]. Be sure to set [JET NAVIGATOR] to [OFF] when you want to delete all contents of a cassette that is recorded while setting [JET NAVIGATOR] to [OFF] or is recorded on another VCR. (See page 11.) Through the AV1 (AUDIO IN/VIDEO IN) sockets. Through the AV2 (AUDIO IN/VIDEO IN) sockets on front panel. • Use the L and R connectors for operations in the normal (monaural) mode. Í/I TAPE REFRESH 2 Insert a cassette that you want to delete the cassette contents. 3 Press [TAPE REFRESH] (38) for 5 seconds or more to put the VCR in tape refresh standby mode. PICTURE MODE PROG PROG TIMER GUIDE PLAY CHECK TAPE REFRESH START:TAPE REFRESH END:STOP 4 Press [TAPE REFRESH] (38) for 2 seconds or more to start the tape refresh function. ¢ TAPE REFRESH (1) 5 END:STOP (1) Other VCR or Video movie camera ¢ Audio Cable (Not supplied) The tape is rewound to the beginning, and it is fast-forwarded with the tape refresh function. When the tape reaches the end, the VCR automatically rewinds it to the beginning. Note: • When a video cassette with a broken off erasure prevention tab is inserted, this function is not activated. 15 NV-HV60GL_GN.book 16 ページ ２００３年２月３日 月曜日 午後３時３２分 6 Press [SPEED] (20) to set the desired tape speed. • SP provides standard recording time, optimum picture and sound quality. LP provides double recording time with slightly reduced picture and sound quality. EP provides triple recording time with slightly reduced picture and sound quality. Regarding the [A] indication, refer to page 17. When you play back a tape recorded in the EP mode, the monaural sound may be unstable. Timer Recording 4-Key Programming Up to 16 timer programmes, including weekly and daily programmes, can be recorded up to one month in advance by setting the timer. For guidance on doing 4-Key Programming, refer to procedure of timer programming (Easy Programming Guide) on OSD on page 17. Preparations • Confirm that the VCR is on. • Confirm that the TV is on and the VCR viewing channel is selected. • Insert a video cassette with an intact erasure prevention tab. • Check that the clock is set to the correct time. If it has not been set, refer to page 9. • Set [VCR/TV] switch (22) to [VCR]. DATE 29SA CATEGORY : 1 7 Press [Cursor] (37) (1) to select the Category. Then, select the desired category by pressing [Cursor] (37) (3421). Example (In case of [JET NAVIGATOR] is set to [ON].): Programme position (channel); 2 Date; 29 October Starting time; 20:02 Ending time; 21:30 Tape speed; LP Category; MUSIC CH ON OFF 2 2 0 : 0 2 2 1 : 3 0 LP CATEGORY SETTING ≥MOVIE ≥MUSIC ≥DRAMA ≥EDUCA ≥DOCUM ≥SPORT ≥CHILD ≥NEWS ≥OTHER ≥– – – – – CATEGORY SETTING ≥MOVIE ≥MUSIC ≥DRAMA ≥EDUCA ≥DOCUM ≥SPORT ≥CHILD ≥NEWS ≥OTHER ≥– – – – – END : MENU END : MENU • Alternatively, you can set the category on the Navigator list. (See page 19 for details.) • This function is activated when [JET NAVIGATOR] is set to [ON]. (See page 11.) When [JET NAVIGATOR] is set to [OFF], proceed to step 9. (Present date; 16 October) Operations 1 Press [PROG/CHECK] (14) to display the menu for timer programme on the TV screen. 8 Press [MENU] (7) to make the previous display appears. 2 Press [DATE] (12) to set the date on which the TV programme will be broadcast. DATE 29SA DATE –––– CH ON OFF – – – – : – – – – : – – SP CATEGORY : 1 DATE 29SA OFF CH ON – – – – : – – – – : – – SP CHECK : PROG./CHECK 9 Press [TIMER (REC)] (19) to switch the VCR over to the timer recording standby mode. • When [JET NAVIGATOR] is set to [ON] (see page 11), the [PROGRAMME IS COMPLETE. REMAINING PROGRAMME 49.]* message appears. • When [JET NAVIGATOR] is set to [OFF] (see page 11), the [PROGRAMME IS COMPLETE.]* message appears. • The VCR will be set to the timer recording standby mode after about 1 minute if [TIMER (REC)] (19) is not pressed. * These messages will not appear if timer recording is started immediately after [TIMER (REC)] (19) is pressed. CATEGORY : 1 • The next item will flash after about 2 seconds. 3 Press [CH] (11) to select the programme position of the desired TV station. • Every time you select the programme position, the background changes. 4 Press [ON] (10) to set the starting time. • When it is kept pressed, the indication changes in 30 minute intervals. 5 Press [OFF] (21) to set the ending time. DATE 29SA CH ON OFF 2 2 0 : 0 2 2 1 : 3 0 LP CH ON OFF 2 2 0 : 0 2 2 1 : 3 0 SP CATEGORY : 1 16 NV-HV60GL_GN.book 17 ページ ２００３年２月３日 月曜日 午後３時３２分 To Suspend the Timer Recording Standby Mode Timer Recording from an External Signal Source When you want to use the VCR for playback, normal recording or some other operation before the programmed timer recording perform, you can temporarily suspend the timer recording standby mode by pressing the [TIMER (REC)] (19) so that the [ ] indication on the VCR display disappears. If timer recording is performed by a unit connected to the Audio/Video input sockets, select the A1 or A2 indicator in step 3 of 4-Key Programming for the programme position. DATE 29SA However, after you have finished using the VCR, be sure to reactivate the timer recording standby mode by pressing the [TIMER (REC)] (19) again otherwise the programmed timer recording will not be performed. CATEGORY : 1 Setting other Programmes in Succession Procedure of Easy Timer Programming on OSD (Easy Programming Guide) Press [GUIDE] (13) or [PROG GUIDE] (45), and the timer programming procedure appears on screen display. Follow the instructions. • Press [GUIDE] (13) or [PROG GUIDE] (45) again to exit the On Screen Display. OFF CH ON A 2 – – : – – – – : – – SP Repeat steps 1-9 of 4-Key Programming. Programming a Timer Recording of a TV Programme Until its End (Tape Speed Auto Change Function) EASY PROGRAMMING GUIDE 1. 2. 3. 4. SET SET SET SET DATE CH ON OFF TIME TIME ssss ss ss:ss ss:ss 5. PUSH SPEED SP 6. PUSH TIMER GUIDE CANCEL : GUIDE If the VCR determines that the remaining tape time is insufficient to record the programme to its end during a timer recording performed in the SP mode, this function automatically changes the tape speed to ensure that the whole programme will be recorded. Weekly Timer Recording The tape speed will change as follows: In step 2 of 4-Key Programming, select the desired day by pressing [DATE] (12). For example, SU (Sunday) PAL system: SP # LP NTSC system: SP # EP • This function cannot change the recording speed to the EP mode for PAL system. DATE SU CH ON OFF – – – – : – – – – : – – SP Depending on the remaining tape length, recording may be performed in the LP (EP) mode from the start. However, if the remaining tape time is still not sufficient in this case, the programme cannot be recorded to the end. The tape length must be set correctly. (See page 11.) Some tapes may not work correctly. If the recording speed changes from SP to LP during a timer recording, some brief picture distortion occurs at that point. CATEGORY : 1 (SU=Sunday, MO=Monday, TU=Tuesday, WE=Wednesday, TH=Thursday, FR=Friday, SA=Saturday) To Activate the Tape Speed Auto Change Function: Press [SPEED] (20) to select [A]. (SU=Sunday, MO=Monday, TU=Tuesday, WE=Wednesday, TH=Thursday, FR=Friday, SA=Saturday) DATE 29SA Daily Timer Recording In step 2 of 4-Key Programming, select the desired days by pressing [DATE] (12). CH ON OFF 2 20:02 21:30 A CATEGORY : 1 • Every time you press [SPEED] (20), the indication changes in the following order: On Screen Display VCR Display A Monday to Friday MO-FR M-F PAL system: SP # LP # EP # A # SP B Monday to Saturday MO-SA M-S NTSC system: SP # EP # A # SP C Sunday to Saturday SU-SA S-S Daily recording For example, C DATE CH ON OFF SU-SA – – – – : – – – – : – – SP CATEGORY : 1 17 NV-HV60GL_GN.book 18 ページ ２００３年２月３日 月曜日 午後３時３２分 Checking a Timer Programme • The VCR must be turned on, or in timer recording standby mode. • Confirm that the TV is on and the VCR viewing channel is selected. 1 Press [PROG/CHECK] (14) twice. • Alternatively, you can press [TIMER CHECK] (44) once on the VCR. • Every time you press [PROG/CHECK] (14) or [TIMER CHECK] (44), the programme shifts below. 1 2 3 4 5 6 7 8 DATE CH 29SA 2 S U -S A 2 5 SU 14 19WE 5 28FR A2 30SU 4 –––– –– –––– –– SELECT: ON OFF 2 0 :0 2 2 1 :3 0 SP 1 0 :3 0 1 1 :0 0 A 1 5 :0 0 1 6 :0 0 SP 2 2 :1 5 2 3 :3 0 EP 2 0 :0 2 2 1 :3 0 SP 1 9 :1 0 1 9 :5 5 EP – –:– – – –:– – – –:– – – –:– – END:MENU 2 Press [Cursor] (37) (1) to display the Category. (When [JET NAVIGATOR] is set to [ON].) Press [Cursor] (37) (1) again to make the previous display appears. 1 2 3 4 5 6 7 8 DATE CH 2 9 SA 2 SU- SA 2 5 SU 14 1 9 WE 5 2 8 F R A2 3 0 SU 4 –––– –– –––– –– SELECT: ON OFF 2 0 :0 2 2 1 :3 0 1 0 :3 0 1 1 :0 0 1 5 :0 0 1 6 :0 0 2 2 :1 5 2 3 :3 0 2 0 :0 2 2 1 :3 0 1 9 :1 0 1 9 :5 5 – –:– – – –:– – – –:– – – –:– – END:MENU 3 Press [MENU] (7) to exit the On Screen Display. Cancelling a Timer Programme • The VCR must be turned on, or in timer recording standby mode. • Confirm that the TV is on and the VCR viewing channel is selected. 1 Press [PROG/CHECK] (14) twice. 2 Press [PROG/CHECK] (14) repeatedly until the desired timer programme is highlighted. 3 Press [CANCEL] (15). 4 Press [MENU] (7) to exit the On Screen Display. 1 2 3 4 5 6 7 8 DATE CH 29SA 2 S U -S A 2 5 SU 14 19WE 5 28FR A2 30SU 4 –––– –– –––– –– SELECT: ON OFF 2 0 :0 2 2 1 :3 0 SP 1 0 :3 0 1 1 :0 0 A 1 5 :0 0 1 6 :0 0 SP 2 2 :1 5 2 3 :3 0 EP 2 0 :0 2 2 1 :3 0 SP 1 9 :1 0 1 9 :5 5 EP – –:– – – –:– – – –:– – – –:– – END:MENU 1 2 3 4 5 6 7 8 DATE CH 29SA 2 S U -S A 2 5 SU 14 19WE 5 28FR A2 30SU 4 –––– –– –––– –– SELECT: ON OFF 2 0 :0 2 2 1 :3 0 SP 1 0 :3 0 1 1 :0 0 A 1 5 :0 0 1 6 :0 0 SP 2 2 :1 5 2 3 :3 0 EP 2 0 :0 2 2 1 :3 0 SP 1 9 :1 0 1 9 :5 5 EP – –:– – – –:– – – –:– – – –:– – END:MENU 1 2 3 4 5 6 7 8 DATE CH 29SA 2 S U -S A 2 5 SU 14 –––– –– 28FR A2 30SU 4 –––– –– –––– –– SELECT: ON OFF 2 0 :0 2 2 1 :3 0 SP 1 0 :3 0 1 1 :0 0 A 1 5 :0 0 1 6 :0 0 SP – –:– – – –:– – EP 2 0 :0 2 2 1 :3 0 SP 1 9 :1 0 1 9 :5 5 EP – –:– – – –:– – – –:– – – –:– – END:MENU Note: • If timer recording is not completed (due to insufficient tape or cancellation by the user), the programmed timer recording data will be cancelled from the memory by 4 A.M two days later. However, if the timer recording function is activated at that time, the programmed timer recording data will not be cancelled. • After you cancel the programmed timer recording data, the current tape speed is displayed during the stop mode. 18 NV-HV60GL_GN.book 19 ページ ２００３年２月３日 月曜日 午後３時３２分 To Set the Category Search Functions The category setting allows you to find what kind of programmes are recorded by the character and the icon indications. Jet Navigator This VCR can display a list of the recorded programmes on the inserted video cassette on the TV screen. You can then select the desired programme, and the VCR will quickly locate its beginning and start playback. Conditions for correct operation of the Jet Navigator function: • The tape length of the inserted cassette must be set correctly. (See page 11.) • The VCR must not be in the timer recording standby mode. • A programme at least 15 minutes must be recorded on the tape. ≥SPORT ≥CHILD ≥NEWS ≥OTHER ≥– – – – – 1 Press [Cursor] (37) (1) while SELECT: END : MENU the Jet Navigator list appears. Then, select the desired category by pressing [Cursor] (37) (3421). 2 Press [MENU] (7). Preparations • Display the VCR picture on the TV. • Be sure to set [JET NAVIGATOR] to [ON] (see page 11) and perform recording. Operations JET NAVIGATOR 1 Press [NAVI] (4) to display the DATE CH ON CATEGORY 1 0 /1 8 1 1 0 :3 0 MU S IC Jet Navigator list. 1 0 /1 9 2 4 1 5 :0 0 S P OR T 1 0 /2 1 5 22 :1 5 1 0 /2 3 A 2 20 :0 2 • Up to 14 programme data that 1 0 /2 6 4 1 9 :1 0 E D U C A 1 0 /2 7 2 2 0 :0 2 have been recorded are 1 0 /2 7 1 2 20 :3 0 SELECT : NAVI, END : MENU displayed on the Jet Navigator list. (7 programme data for each page) • When more than 15 programs have been recorded in one cassette, the programme data are deleted from the first one. • When pressing [NAVI] (4) during playback, playback stops and the Jet Navigator list appears. Category Indication MOVIE MOVIE MUSIC MUSIC DRAMA DRAMA EDUCATION EDUCA DOCUMENTARY DOCUM SPORTS SPORT CHILDREN CHILD NEWS NEWS OTHERS OTHER Icon To Delete the Jet Navigator Data of a Single Video Cassette Tape: Keep [CANCEL] (15) pressed for more than 5 seconds while the Jet Navigator list appears. [ss] appears on the list. See page 11 on the way to delete all the Jet Navigator data stored in the VCR memory. 2 Press [NAVI] (4) several times to select the programme that you want to locate and play back. After more than 3 seconds, the VCR starts to search for the beginning of the selected programme and playback starts automatically. • Every time you press [NAVI] (4), JET NAVIGATOR the programme shifts above. DATE CH ON CATEGORY 1 0 /1 8 1 1 0 :3 0 MU S IC • If, after playback has started, you 1 0 /1 9 2 4 1 5 :0 0 S P OR T 1 0 /2 1 5 22 :1 5 1 0 /2 3 A 2 20 :0 2 want to search for the beginning 1 0 /2 6 4 1 9 :1 0 E D U C A 1 0 /2 7 2 2 0 :0 2 of the same or another 1 0 /2 7 1 2 20 :3 0 SELECT : NAVI, END : MENU programme, press [NAVI] (4). Playback stops and the Jet Navigator list appears. Notes: • The Jet Navigator list is stored in each cassette. • Signals approximately 10 seconds before and after the current tape position are checked. (During this checking, [CHECKING JET NAVIGATOR DATA.] is displayed on the TV screen.) • Checking cannot be performed properly when signals are attempted to be checked at portions of the tape where there are no signals such as at unrecorded portions of the tape. In this case, press [NAVI] (4) at a portion of the tape where a programme has been recorded of this VCR. This will allow signal checking to be performed more reliably. When a signal is still not found, [CAN NOT FIND JET NAVIGATOR DATA.] is displayed on the TV and you cannot find the beginning of the programme. • Up to 20 cassettes and 50 programmes can be registered. • If 50 recorded programme data are already stored in memory and you attempt to store timer recording data for another programme, the message [REMAINING PROGRAMME 0. DELETE JET NAVIGATOR DATA.] appears. If you attempt to make a new recording, this same message also appears after you insert the cassette and the Jet Navigator data is checked. As each timer recording or manual recording is finished, the programme data is deleted, starting from the oldest data. • When a new programme is attempted to be recorded after programmes equivalent to 20 cassettes are already stored in memory, [REMAINING CASSETTE 0. FOR JET NAVIGATOR.] is displayed. Programmes recorded without deleting data as instructed are not registered in the list. JET NAVIGATOR To Cancel the Jet Navigator list: Press [MENU] (7). CATEGORY SETTING ≥MOVIE ≥MUSIC ≥DRAMA ≥EDUCA ≥DOCUM DATE CH ON CATEGORY 1 0 /1 8 1 1 0 :3 0 MU S IC 1 0 /1 9 2 4 1 5 :0 0 S P OR T 1 0 /2 1 5 22 :1 5 1 0 /2 3 A 2 20 :0 2 1 0 /2 6 4 1 9 :1 0 E D U C A 1 0 /2 7 2 2 0 :0 2 1 0 /2 7 1 2 20 :3 0 SELECT : NAVI, END : MENU 19 NV-HV60GL_GN.book 20 ページ ２００３年２月３日 月曜日 午後３時３２分 To Find the Beginning of Each Recording (VHS Index Search System) When Recording Over the Same Location on a Tape: • The originally recorded programme is deleted from the list. • Programme contents starting near the start and end of the newly recorded programme (within 10 minutes before the start and after the end of the newly recorded programme) is also erased. (Although old programme contents are also similarly erased in the case of ordinary recording, the newly recorded programme is not registered in the list.) This VCR automatically records special index signals on the tape every time a recording is started. The Index search function makes use of these index signals to let you find the beginning of a desired programme quickly and easily. Index signals are automatically recorded in the following cases: • When you start a recording by pressing [REC] (27) or [REC/ OTR] (41). • When a timer recording starts. • When you press [REC] (27) on the remote control during recording. Erased Programme 1 Programme 2 Programme 3 New programme Conditions for correct operation of the Index search function: • The VCR must be in the stop mode or in the playback mode. • Each programme recorded on the tape must be at least 5 minutes long. Within 10 minutes Erased Programme 1 Programme 2 Programme 3 Preparations • Display the VCR picture on the TV. • Insert a recorded video cassette. New programme Operation 1 Press [INDEX] (30) (that corresponds to the direction from the current tape position in which the desired programme is located on the tape) to start the index search. For example, if you want to search for the 2nd recorded programme in forward direction, press [INDEX] (30) (L) twice. Within 10 minutes Not erased Programme 1 Programme 2 Programme 3 New programme 10 minutes or more To Demonstrate the Jet Navigator Function Keep [NAVI] (4) pressed for more than 5 seconds without inserting a cassette tape. • The VCR fast-forwards or rewinds the tape and searches for the specified index signal (the beginning of the desired recorded programme). When it is found, playback starts automatically. To Check the Recorded Programming Data (Time Stamp Function) When playback starts after searching with Jet Navigator function or index search function, recorded programming data (called Time Stamp) appears on the TV screen for approx. 5 seconds. CH 2 10/29. SA To Cancel the Index Search or to Stop Playback: Press [Stop] (9). ON 20:02 Notes: • Searching in either direction is possible up to the 20th index signal. • If you press either of [INDEX] (30) too many times, simply press the other [INDEX] (30) (indicating the opposite direction) to correct it. In this way, you can reduce the displayed figure down to 1. • The figure on the VCR display decreases by 1 every time an index signal is located. Preparation • Display the VCR picture on the TV. Note: • Time Stamp does not appear if the beginning of the Jet Navigator data is not recorded 10 minutes before and after the current tape position even when index signals are recorded. 20 NV-HV60GL_GN.book 21 ページ ２００３年２月３日 月曜日 午後３時３２分 Finding a Timer-recorded programme for viewing (Easy Programme Playback) Before Requesting Service Allows you to find a timer-recorded programme with Onetouch operation and to play it back easily. Message of On Screen Display The error message is indicated in brackets [ Preparation Set timer recording for the programme you wish to view. Operation 1 Press [PROG PLAY] (5). • As soon as the timer-recorded programme is found, playback starts automatically. PROG PLAY ]. [PLEASE PUT IN A VIDEO CASSETTE.] • [REC/OTR] (41) ([REC] (27)) or [TIMER (REC)] (19) has been pressed without a video cassette inserted. #Insert a video cassette. [PLEASE STOP THE TAPE.] • [TUNER PRESET] has been selected during playback. #Stop the tape. 2222 [PLEASE SET THE CLOCK.] • [TIMER (REC)] (19), [GUIDE] (13), [PROG GUIDE] (45), [PROG/CHECK] (14) or [TIMER CHECK] (44) has been pressed when the clock is not set. #Set the clock. [PLEASE USE A CASSETTE WITH TAB.] • [REC/OTR] (41) ([REC] (27)) or [TIMER (REC)] (19) has been pressed with a video cassette without an intact erasure prevention tab. #Use a video cassette with an intact erasure prevention tab. To Cancel the Easy Programme Playback: Press [Stop] (9). Notes: • The VCR memorises the position at which timer recording is set to the standby mode by pressing [TIMER (REC)] (19) at the start point of Easy Programme Playback. • If you take out the cassette after a timer recording has finished, Easy Programme Playback function does not work. [NO TIMER RECORDING HAS BEEN SET.] • [TIMER (REC)] (19) has been pressed with no timer programmes. #Set timer recording. [VCR IS IN THE TIMER STANDBY MODE.] • [VCR-ON/OFF] (1) has been pressed during the timer standby mode. #Press the [TIMER (REC)] (19) to release the VCR from the timer standby mode. [CAN NOT FIND PROG PLAY DATA.] • [PROG PLAY] (5) has been pressed with no programmed timer recording data. #Set timer recording. The VCR will not operate correctly The symptom description is indicated in brackets [ ]. [The VCR display is not illuminated.] • The mains lead has not been connected. #Connect the mains lead to the mains supply. [The VCR display is illuminated but the VCR will not operate.] • The VCR is in the timer mode. #Press the [TIMER (REC)] (19) to operate the VCR manually. • Safety devices are operating. #Disconnect the mains lead and wait for 1 minute. Reconnect the mains supply and check functions. • Dew may have formed. #Do not operate the VCR for 1 hour. 21 NV-HV60GL_GN.book 22 ページ ２００３年２月３日 月曜日 午後３時３２分 Playback will not operate correctly The symptom description is indicated in brackets [ Crystal View Control ]. The crystal view control function ensures that you always obtain the optimum picture quality so that you get the best picture automatically. [The picture is noisy or is not in colour. Horizontal bars or lines run down the screen.] • Tracking is not correct. #Adjust the tracking. See the right column. • The TV has not been tuned to the VCR. #Tune the TV to the VCR. See page 6. • The video heads are clogged or worn. #Consult Panasonic Customer Care Centre for advice on 132600. (NV-HV60GL only) #Consult your dealer for further advice. • The playback picture is distorted when using an E300 type video cassette that was recorded in the LP or EP mode. #We recommend that you use video cassettes other than type E300. Recording will not operate correctly The symptom description is indicated in brackets [ Adjusting the Playback Picture Under normal conditions, the VCR automatically adjusts the playback picture for optimum quality. However, in some cases it may be necessary to adjust it manually. If the Picture Contains Noise Bars and It Is Not Clear to See (Tracking adjustment): If noise bars appear during normal playback, slow playback or still playback, follow the operations below. During normal or slow playback, press [TRACKING/V-LOCK] (32) _ or ` until the bars noise disappear. • If the noise bars appear during still playback, switch the VCR over to the slow playback mode and then adjust the tracking as explained above. ]. [The indication flashes whenever recording is attempted.] • The erasure prevention tab on the video cassette has been broken off. #Use a tape with an intact erasure prevention tab, or cover the tab hole with adhesive tape, if the original recording is no longer required. Playback picture containing noise bars To Return to Auto Tracking: Press both [TRACKING/V-LOCK] (32) _ and ` simultaneously. [The picture is recorded with noise or a blank screen.] • The aerial or aerial cable is defective. #Check the aerial connection to the VCR. See page 5. #Check your normal TV picture. If there is no picture, check your aerial. • The VCR is not correctly tuned. #Retune the VCR. See pages 7-8. • A1 or A2 has been selected. #Select the required TV programme. If the Still Picture Scrolls Up or Down (V-Lock Adjustment): If the still picture scrolls up or down, perform the following operation. During still playback, keep [TRACKING/V-LOCK] (32) _ or ` pressed until the picture stops scrolling. Precautions: • With certain TV models and tapes, it may not be possible to adjust the tracking. • If you play back a cassette that was recorded on another VCR, the picture quality may be inferior and it may be necessary to adjust the tracking. Also, on some TVs, the picture may scroll up and down in the special playback functions. However, these are not malfunctions. [Timer recording cannot be performed.] • The clock or calendar has been incorrectly set. #Check the clock and calendar. Set them to the present time. (Note that this is a 24-hour clock.) See page 9. • The recording starting or ending time setting is incorrect. #Set the recording starting and ending time correctly. • The VCR has not been set for timer recording. #Press [TIMER (REC)] (19) after programming for timer recording. Dirt on the video heads If the video heads get dirty, pictures will not be recorded or played back clearly. (See the following conditions.) [AV external recordings cannot be made.] • A1 or A2 has not been selected. #Select A1 or A2 by pressing [INPUT SELECT] (33). • External AV connections are incorrect. #Check that the connections for external video and audio sources are correct. See page 15. The remote control will not operate correctly The symptom description is indicated in brackets [ TV screen Normal picture Small amount of dirt Large amount of dirt ]. [The remote control does not operate correctly.] • The remote control transmitter beam is not reaching the VCR. #Ensure that the remote control is being pointed at the VCR and that the transmitter beam is not obstructed. • The distance is too far. #Use the remote control within 7 m of the VCR. • The batteries are exhausted. #Replace the batteries. See the precautions for replacement on page 2. • The batteries are incorrectly fitted with (+/-) reversed. #Fit the batteries correctly as shown on page 2. If this happens, insert and eject a cassette 5-10 times successively to remove the dirt from the video heads. If the problem still persists after performing above, contact a service personnel to request assistance. Head cleaning by service agents is not covered by warranty. 22 NV-HV60GL_GN.book 23 ページ ２００３年２月３日 月曜日 午後３時３２分 Specifications NV-HV60GL/GN Power Source: Power Consumption: Video Recording System: Video Heads: Audio Heads: Tape Speed: Tape Format: Record/Playback Time: FF/REW Time: VIDEO Television System: Modulation System: Input Level: Output Level: AUDIO Input Level: Output Level: Audio Track: Video Horizontal Resolution: Signal-to-Noise Ratio: Dynamic Range: Audio Frequency Response: Wow and Flutter: Operating Temperature: Operating Humidity: Weight: Dimensions: Standard Accessories: 220-240 V AC 50/60 Hz 13 W 2 rotary heads, helical scanning system 4 heads 2 heads (Hi-Fi) PAL SP; 23.39 mm/s LP; 11.7 mm/s NTSC SP; 33.3 mm/s EP; 11.1 mm/s VHS tape PAL SP; 240 min with NV-E240 PAL LP; 480 min with NV-E240 PAL EP; 720 min with NV-E240 Approx. 60 s with NV-E180 (FF/REW) Approx. 43 s with NV-E180 (Jet Rewind) EP; 7.8 mm/s CCIR; 625 lines, 50 fields, PAL colour signal EIA; 525 lines, 60 fields, NTSC colour signal Luminance; FM azimuth recording Colour signal; converted subcarrier phase shift recording VIDEO IN (PHONO); 1.0 Vp-p, 75 ohm, terminated VIDEO OUT (PHONO); 1.0 Vp-p, 75 ohm, terminated RF Modulate UHF Channel AU28-69 (NV-HV60GL) 75 ohm NZ21-69 (NV-HV60GN) 75 ohm AUDIO IN (PHONO); j6 dBV, more than 47 kohm AUDIO OUT (PHONO); j6 dBV, less than 1 kohm 1 track (Normal-mono only), 2 channels (Hi-Fi sound-stereo) Colour; more than 240 lines (SP) Video; more than 43 dB (SP) Audio; more than 65 dB (Hi-Fi) Audio; more than 90 dB (Hi-Fi audio track) 20 Hz-20 kHz/Hi-Fi 0.005% Wrms/Hi-Fi 5oC-40oC 35%-80% 3 kg 430 (W) a 89 (H) a 227 (D) mm 1 pc. AC Main Lead 1 pc. RF Coxial cable 1 pc. Remote Control 2 pcs. R6 size batteries 1 pc. Audio/Video cable Weight and dimensions shown are approximate. Specifications are subject to change without notice. 23 NV-HV60GL_GN.book 24 ページ ２００３年２月３日 月曜日 午後３時３２分 Matsushita Electric Industrial Co., Ltd. Web Site: http://www.panasonic.co.jp/global/
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Modify Date : 2003:07:01 10:08:48+10:00 Create Date : 2003:06:30 13:37:49+09:00 Title : NV-HV60GL_GN.book Creator : FrameMaker 6.0 Producer : Acrobat Distiller 5.0.5 (Windows) Page Count : 24 Mod Date : 2003:07:01 10:08:48+10:00 Creation Date : 2003:06:30 13:37:49+09:00 Metadata Date : 2003:07:01 10:08:48+10:00EXIF Metadata provided by EXIF.tools