Panasonic SB ZT2 PP (VQT2T88)_En_100112 User Manual To The 7c04340a E677 46cf 9ab4 7312bc618e80

User Manual: Panasonic SB-ZT2 to the manual

Open the PDF directly: View PDF PDF.
Page Count: 8

This speaker system is exclusively used for SC-ZT2. This unit
is not stand-alone equipment. (As of January, 2010)
Dear customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product, please
read the instructions completely.
Please keep this manual for future reference.
PP
Operating Instructions
Speaker System
Model No. SB-ZT1
SB-ZT2
As an ENERGY STAR® Partner ,
Panasonic has determined that this
product meets the ENERGY STAR®
guidelines for energy efficiency.
Ú For Canada only: The word “Participant” is used in place of
the word “Partner”.
For U.S.A. and Puerto Rico only
The warranty can be found on page 5.
Please register via the Internet at:
www.Panasonic.com/register
For Canada only
The warranty can be found on page 6.
If you have any questions contact
In the U.S.A. and Puerto Rico: 1-800-211-PANA (7262)
In Canada: 1-800-561-5505
VQT2T88
H0110RT0
En Cf
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using
the unit. Follow the safety instructions on the unit and the
applicable safety instructions listed below. Keep these
operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampli ers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug has
two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided
plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories speci ed by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table speci ed by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to quali ed service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
5$<6228366A'PAKPFF5$<6228366A'PAKPFF 
VQT2T88
2
Setup example
Front speaker
(right)
Front speaker
(left)
Connected equipment
Main unit
Surround
speaker
(left)
Surround
speaker (right)
Approx.120°
Supplied accessories/AC power supply connection/Control guide/Installation
Aim the front face (with Panasonic logo) of each speaker at the
listening-viewing position for setting.
Place the surround speakers slightly at the back right and left of the
listening-viewing position.
As this system uses a frequency band of 2.4 GHz, the radio waves
may be interrupted by an obstacle. Depending on the surrounding
environment (i.e. radio wave interruption from outside, etc.) or the
building structure where this system is used (i.e. wall that easily
reflects radio waves, etc.), sounds may be cut or noise may occur.
Install this system properly paying attention to the following descriptions.
Equipment certification
As this system received Technical Conditions compliance certi cation
based on the Radio Law, the wireless station license is not required.
However, if you do the following actions to this system, you may be
held accountable by law.
Disassemble or refurbish
Restrictions for use
Domestic use only.
Use this system in the same room.
Do not place an obstacle between the main unit (SC-ZT2) and
speakers.
Radio
waves from this system reach a maximum range of 15 m
(49 feet) in the same room. If there is an obstacle between the main
unit (SC-ZT2) and speakers or the main unit (SC-ZT2) is placed at
the height of 50 cm (1.6 feet) or below from the floor, the
radio
waves
reach a smaller range.
Keep this system away from equipment that generates radio
wave interference.
If the following equipment is located near the system, install this
system away from such equipment.
Bluetooth, OA devices, telephone, etc.: approx. 3 m (10 feet) or
more
Microwave oven, wireless LAN compatible devices: approx. 3 m
(10 feet) or more
This system is designed to automatically avoid radio wave interference
with such household equipment. If radio wave interference occurs, the
Wireless Link display (
page 14 of SC-ZT2 Operating Instructions) may
blink, the sounds from speakers may be interrupted or noise may occur.
These phenomena occur when this system selects a proper
frequency. These are not malfunctions.
Keep this system away from metal objects that tend to reflect
radio waves.
If there are metal objects or furniture in the room where this system is
installed,
radio
waves tend to be reflected. Depending on the listening-
viewing position, sounds may be interrupted or noise may occur. These
symptoms may be remedied by slightly moving this system’s position.
Note that radio waves tend to be reflected also when this system is
installed in rooms with a lot of activity.
There is no positional distinction for each speaker before setting.
Make sure to place the speakers on a flat, stable surface so
there is no danger of them falling over.
When carrying speakers, hold the pole and base parts. (left)
The speakers of this system are not magnetically shielded. Do
not install this system near a CRT-based television.
Note
Make sure the base parts are not covered by cloth such as a curtain.
Before attaching the leg cushion (included) on the base parts to
prevent tilt or rattle on the floor, make sure there are no people in
the surrounding area.
Set the distance from each speaker to the listening-viewing position.
(page 22 of SC-ZT2 Operating Instructions)
Installation
Wireless functions
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking
for replacement parts.
(Product numbers correct as of January 2010. These
may be subject to change.)
Only for U.S.A. and Puerto Rico: To order accessories, refer
to “Accessory Purchases
(United States and Puerto
Rico)” on page 5.
Only for Canada: To order accessories, call the dealer from
whom you have made your purchase.
Supplied accessories
2 AC power supply cords
(K2CB2CB00021)
Leg cushions (1 sheet: 8 pieces) (RFA3045-2)
Keep the leg cushion out of reach of children to prevent swallowing.
AC IN
To save power when the system is not to be used for a long time,
unplug it from the household AC outlet.
Make sure to turn this system off before unplugging the AC power
supply cord.
For power consumption of speakers in Standby, see right page.
AC power supply connection
Household AC outlet
(AC 120 V, 60 Hz)
AC power supply
cord (included)
The included AC power supply cords are for use with this system only.
Do not use them with other equipment. Also, do not use AC power
supply cord for other equipment with this system.
Note
Side view
Control guide
TEST terminal
ID switch
AC IN
TEST ID
2
1
Speaker (with built-in amplifier)
TEST terminal: This is used to check the product
operation status. Only used in factory. Do not
insert a foreign object.
ID switch: This is used to check the product
operation status and not used regularly.
WIRELESS LINK
Pole (mid-high part)
Base
(woofer
part)
Side view
AC inlet ( above)
1[WIRELESS LINK] indicator ( right
page)
2
For switching the speaker “ON/OFF”
( right page)
Note
POWER
5$<6228366A'PAKPFF5$<6228366A'PAKPFF 
VQT2T88
Speaker setting/Maintenance
3
The lightning ash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
suf cient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Caution
Use the speakers only with the recommended
system. Failure to do so can damage the
amplifier and speakers, and can cause fire.
Consult a qualified service person if damage
occurs or if a sudden change in performance
is apparent.
Do not attach these speakers to walls or
ceilings.
Speaker setting
Make sure to make this setting when using for the first time after purchase.
Link the front speakers (SC-ZT2) wirelessly first and then
make the settings for the surround speakers.
Preparations
Make sure that all equipment has been turned off.
(When the VIERA Link “HDAVI Control” compatible Panasonic
TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) are
connected, do not turn on TV (VIERA) and Blu-ray Disc player/DVD
recorder (DIGA) until the setting is complete.)
Connect AC power supply of main unit (SC-ZT2) and 4
speakers to household main sockets. ( page 12 of SC-ZT2
Operating Instructions and left page of this manual)
Make sure that the main unit (SC-ZT2) and speakers have been turned off.
Prepare the remote control (SC-ZT2). ( page 7 of SC-ZT2
Operating Instructions)
1. Turn the main unit (SC-ZT2) on.
2. Turn on the front speakers (SC-ZT2).
The color of the [WIRELESS LINK] indicator of the front speakers
changes from red to green.
Do not turn on the surround speakers yet at this point. The color
of the [WIRELESS LINK] indicator does not change from red to
green even if the power is turned on.
3.
Set “4CH ” at the setting operation of “Changing the number of
speakers to 4”. ( page 15 of SC-ZT2 Operating Instructions)
4. Turn the main unit (SC-ZT2) off once.
5. Turn the main unit (SC-ZT2) on again.
4CH SEARCH ” appears on the display. (This is displayed only
at the first-time setting.)
6. Turn on the surround speakers.
The color of the [WIRELESS LINK] indicator of the surround
speaker changes from red to green.
When the [WIRELESS LINK] indicator of each speaker lights
green, “4CH SEARCH ” display disappears.
7.
Press and hold [CH] on the remote control (SC-ZT2) about 3 seconds
until “4 SPKR SET ” is displayed on the main unit’s display.
Always aim the remote control at the main unit for operation.
8. Press the remote control (SC-ZT2) button corresponding to
the speaker outputting the con rmation sound.
Front speaker (left) : [GAME]
Front speaker (right) : [MUTE]
Surround speaker (left) : [–SETUP, OFF]
Surround speaker (right) : [ RETURN]
Sound is output from any of the speakers.
When you press the button corresponding to the confirmation
sound of a speaker, another speaker outputs a confirmation
sound. Press the corresponding button in the same way and
complete settings for all 4 speakers.
When “COMPLETE ” disappears on the main unit’s display, the
speaker setting is complete.
Note
Check if the speakers are properly set after setting the speakers.
( page 14 of SC-ZT2 Operating Instructions)
If the speakers are set incorrectly in step 8, turn the main unit
(SC-ZT2) off then on again and perform steps 7 and 8.
If the [WIRELESS LINK] indicator does not change from red to green,
see page 27 of SC-ZT2 Operating Instructions, “Troubleshooting guide”.
Corresponding buttons
(page 15 of SC-ZT2
Operating Instructions)
Speaker (left page)
Maintenance
Unplug the AC power supply cord from the household AC outlet and
wipe the system using a soft and dry cloth.
When the system is very dirty, wring the cloth soaked in water
thoroughly, wipe the dirt and wipe moisture off with a dry cloth.
Do not use solvents such as benzine, thinner, alcohol, etc. because
they may cause casing to deform and coating to come off.
Before using chemically treated cloth, read the instructions that
come with the cloth carefully.
When you turn the main unit (SC-ZT2) off with the speakers on,
the speakers automatically enter Standby (Wireless Link Standby).
The color of the [WIRELESS LINK] indicator turns to red.
To reduce more of the power consumption of speakers in Standby, turn
the speakers off. The speakers enter Standby (In Standby condition).
<Power consumption of speakers in Standby>
Wireless Link Standby: approx. 0.8 W (per 1 speaker)
In Standby condition: approx. 0.1 W (per 1 speaker)
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY OTHER MATERIALS DO
NOT OBSTRUCT THE VENTILATION VENTS.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
*
DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
*
USE ONLY THE RECOMMENDED ACCESSORIES.
*
DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The unit should be installed near an accessible AC power outlet,
with the power cord connected directly to it.
To completely disconnect power from the unit, unplug the power
cord from the AC power outlet.
CAUTION!
Do not place anything on top of this unit or block the heat radiation
vents in any way. In particular, do not place DVD recorder or CD/
DVD players on this unit as heat radiated from it can damage your
software.
5$<6228366A'PAKPFF5$<6228366A'PAKPFF 
VQT2T88
4
-If you see this symbol-
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact
your local authorities or dealer and ask for the
correct method of disposal.
Speci cations/Product Service
Product Service
1. Damage requiring service — The unit should be serviced by
quali ed service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change
in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing — Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing to
authorized servicing personnel.
3. Replacement parts When parts need replacing ensure the
servicer uses parts speci ed by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in re, electric shock, or other hazards.
4. Safety check — After repairs or service, ask the servicer to perform
safety checks to con rm that the unit is in proper working condition.
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the
entire system.
For product information or assistance with product operation:
In the U.S.A. and Puerto Rico, refer to “Customer Services Directory
(United States and Puerto Rico)” on page 5.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre
at 1-800-561-5505, or visit the website (www.panasonic.ca), or an
authorized Servicentre closest to you.
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
User memo:
The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.
MODEL NUMBER
SERIAL NUMBER
Speci cations
g POWER AMPLIFIER SECTION1
RMS output power
10 % total harmonic distortion
Woofer Speaker ch 60 W (100 Hz, 3 )
Mid High Speaker ch 20 W (1 kHz, 8 )
System Total Power2 160 W (80 W x 2)
FTC output power
1.0 % total harmonic distortion
50 Hz to 250 Hz Woofer Speaker ch 37 W (3 )
250 Hz to 20 kHz Mid High Speaker ch 13 W (8 )
System Total Power2 100 W (50 W x 2)
g SPEAKER SECTION1
2-way 5 speakers system (Bass reflex type)
Woofer part 12 cm cone type x 1
Mid High part 2.4 x 10 cm flat type x 4
g SPEAKER GENERAL1
Power supply AC 120 V, 60 Hz
Power consumption 20 W
Wireless Link Standby 0.8 W
In Standby condition 0.1 W
Dimensions ( W x H x D ) 290 mm x 1231 mm x 290 mm
(11-13/32" x 48-15/32" x 11-13/32")
Mass [ Weight ] Approx. 3.9 kg (8.6 lb.)
Operating temperature range 0°C to 40°C (32°F to 104°F)
Operating humidity range 20 % to 80 % RH (no condensation)
g WIRELESS SECTION
Frequency of the using band 2.4000 GHz to 2.4835 GHz
Number of using channels 3
The reaching distance 15 m (49 ft)3
1: per 1 speaker
2: use 2 speakers
3 It is under the condition as follows.
At same room indoor, there is not an obstacle between the
main unit and the speaker.
And installing a main unit in the position with equal to or more
than 50 cm height.
Note: 1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital
spectrum analyzer.
3. Total harmonic distortion is measured by using AES17
filter.
Product information
5$<6228366A'PAKPFF5$<6228366A'PAKPFF 
VQT2T88
5
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Home Audio Products
Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Electronics Company (referred to as “the warrantor”) will, for the
length of the period indicated on the chart below, which starts with the date of original
purchase (“warranty period”), at its option either (a) repair your product with new or
refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or
(c) refund your purchase price. The decision to repair, replace or refund will be made by
the warrantor.
During the “Labor” warranty period there will be no charge for labor. During the “Parts”
warranty period, there will be no charge for parts. This Limited Warranty excludes both
parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet).
This warranty only applies to products purchased and serviced in the United States or
Puerto Rico. This warranty is extended only to the original purchaser of a new product
which was not sold “as is”.
Carry-In or Mail-In Service
To find a service center please visit http://www.panasonic.com/help or call
1-800-211-PANA (7262).
When shipping the unit, carefully pack, include all accessories, and send it prepaid,
adequately insured and preferably in the original carton. If Lithium Ion batteries are
shipped by air the package must be labeled “Contains Lithium Ion Battery (No lithium
metal)”. Damaged batteries are prohibited from shipment by US Mail. Batteries must be
securely packed in a manner to prevent short-circuiting and a package cannot contain
more than 3 Lithium Ion batteries. Include a letter detailing the complaint, a return
address and provide a daytime phone number where you can be reached. A valid
registered receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER
WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE
INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED
WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and
DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO
DOES NOT COVER damages which occurred in shipment, or failures which are caused
by products not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-
up adjustments, misadjustment of consumer controls, improper maintenance, power
line surge, lightning damage, modification, introduction of sand, humidity or liquids,
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate
your nearest Dealer or Service Center; purchase Parts and
Accessories; or make Customer Service and Literature requests
by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express, and
Personal Checks)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of November 2009
Product or Part Name Parts Labor
Audio Products (except items below) 1 year 1 year
DVD Home Theater System 1 year 1 year
USB Reader-writer, PC Card Adapters
(defective exchange) 1 year Not Applicable
Accessories: Headphones, cartridges,
Microphones, Adapters 90 days 90 days
Rechargeable Batteries, DVD-RAM Disc
(defective exchange)
10 days Not Applicable
SD Memory Cards, Rechargeable Battery
Packs (defective exchange)
90 days Not Applicable
commercial use such as hotel, office, restaurant, or other business or rental use of the
product, or service by anyone other than a Factory Service Center or other Authorized
Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or
damage to media or images, data or other memory or recorded content. The items listed are
not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state. If a problem with this product develops during or after the warranty
period, you may contact your dealer or Service Center. If the problem is not handled to your
satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses
listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE
YOUR RESPONSIBILITY.
5$<6228366A'PAKPFF5$<6228366A'PAKPFF 
VQT2T88
6
Limited Warranty (ONLY FOR CANADA)
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any
such defect for a period as stated below from the date of original purchase.
Technics Audio Product One (1) year, parts and labour
Panasonic Portable / Clock Radio (without Tape, CD, MD) One (1) year, parts and labour
Panasonic Audio / SD Audio Product One (1) year, parts and labour
Panasonic DVD Product One (1) year, parts and labour
Panasonic Combination DVD Player / VCR One (1) year, parts and labour
Panasonic Combination DVD Recorder / VCR One (1) year, parts and labour
Accessories including rechargeable batteries Ninety (90) days
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed,
subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or which has
been altered or repaired in any way that affects the reliability or detracts from the performance, nor does it cover any product
which is used commercially. Dry cell batteries are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original
purchase is required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the
exclusion of implied warranties, so the above limitations and exclusions may not be applicable.
WARRANTY SERVICE
FOR PRODUCT OPERATION ASSISTANCE, please contact:
Our Customer Care Centre: Telephone #: (905) 624-5505
1-800 #: 1-800-561-5505
Fax #: (905) 238-2360
Email link: “Customer support” on www.panasonic.ca
FOR PRODUCT REPAIRS, please locate your nearest Authorized Servicentre at www.panasonic.ca :
Link : “ServicentresTM locator” under “Customer support”
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
5$<6228366A'PAKPFF5$<6228366A'PAKPFF 
VQT2T88
7
This device complies with RSS-210 of the IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received,
including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for uncontrolled equipment and meets RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum
permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more
between the radiator and person’s body (excluding extremities: hands,wrists,feet and ankles).
THE FOLLOWING APPLIES ONLY IN CANADA.
Safety precautions
Do not use this device in hospitals and other places where electric medical devices are installed.
Do not use this device near automatic doors, fire alarms and other automatically controlled apparatus.
Do not hold the speaker with one hand.
Before attaching the leg cushion on the base parts of speakers to prevent tilt or rattle on the floor, make sure there are no people
in the surrounding area.
Do not insert your hand or foot into the opening of side surface of base part.
Do not turn on the speakers with foot or vacuum cleaner carelessly.
Do not use this device as a plaything.
This Class B digital apparatus complies with Canadian ICES-003.
THE FOLLOWING APPLIES ONLY IN CANADA.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded interface cables must be used with this equipment. Operation
with non-approved equipment or unshielded cables may result in interference to radio and TV reception. Any changes or
modi cations not approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio
frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to
comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at
least 20 cm and more between the radiator and person’s body (excluding extremities: hands,wrists,feet and ankles).
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
5$<6228366A'PAKPFF5$<6228366A'PAKPFF 
VQT2T88
8
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
© Panasonic Corporation 2010
Printed in Malaysia
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca
5$<6228366A'PAKPFF5$<6228366A'PAKPFF 

Navigation menu