Panasonic SL SX390 User Manual To The F568fd89 F7e8 400b A7c4 150c24f792a5

User Manual: Panasonic SL-SX390 to the manual

Open the PDF directly: View PDF .
Page Count: 8

SL-SX390

Safety

1. Power source—Connect the unit to a power source

of the type described in these instructions or as

marked on the unit.

2. Polarization—The unit is equipped with a polarized

power plug where one blade is wider than the other.

This safety feature ensures that the plug fits into your

household AC outlet only one way. If the plug doesn’t

fit one way, try reversing it. If the plug still doesn’t fit,

contact an electrician to replace the obsolete outlet.

Do not attempt to defeat the safety purpose of the

plug.

3. Power cord protection—Route the AC power sup-

ply cord so that it will not be walked on or pinched by

items placed on or against it. Never take hold of the

plug or cord with wet hands. Always grasp the plug

body firmly when connecting and disconnecting it.

4. Overloading—When connecting the AC power sup-

ply cord, be careful not to overload the household AC

outlet, extension cord, or outlet from any other device

as this can result in fire or electric shock.

5. Nonuse periods—Turn the unit off when it is not in

use. Unplug the unit from the household AC outlet if it

is not to be used for a long time. Unplug the unit dur-

ing lightning storms. Leaving the unit connected to a

household AC outlet for extended periods can cause

battery fluid leakage.

6. Attachments and accessories—Use only the at-

tachments and accessories recommended in these

operating instructions.

Installation

Placement

1. Foreign material—Ensure objects and liquids do not

get into the unit. Avoid exposing the unit to excessive

smoke, dust, mechanical vibration, and shock.

2. Magnetism—Situate the unit away from equipment

and devices that generate strong magnetic fields.

3. Stacking—Do not place anything on top of this unit.

4. Wall and ceiling mounting—Do not mount the unit

on walls or ceilings unless specified in the instruc-

tions.

Environment

1. Water and moisture—Do not use the unit near

water, such as near a bathtub or swimming pool.

Avoid damp basements.

2. Heat—Situate the unit away from heat sources, such

as radiators. Do not leave it in an automobile ex-

posed to direct sunlight with the doors and windows

closed as this may deform the cabinet.

2. Do not situate where temperatures fall below 5 oC (41

oF) or rise above 35 oC (95 oF).

Maintenance

(See page 7 for details.)

Unplug the unit from the household AC outlet before

cleaning.

Clean with a damp cloth.

Do not use abrasive pads, scouring powders, or sol-

vents.

Service

1. Damage requiring service—The unit should be ser-

viced by qualified service personnel if:

1. (a) The AC power supply cord or AC adaptor has

been damaged; or

1. (b) Objects or liquids have gotten into the unit; or

1. (c) The unit has been exposed to rain; or

1. (d) The unit does not operate normally or exhibits a

marked change in performance; or

1. (e) The unit has been dropped or the cabinet dam-

aged.

2. Servicing—Do not attempt to service the unit be-

yond that described in these operating instructions.

Refer all other servicing to authorized servicing per-

sonnel.

3. Replacement parts—When parts need replacing en-

sure the servicer uses parts specified by the manu-

facturer or parts that have the same characteristics

as the original parts. Unauthorized substitutes may

result in fire, electric shock, or other hazards.

4. Safety check—After repairs or service, ask the ser-

vicer to perform safety checks to confirm that the unit

is in proper working condition.

Portable CD player

Dear Customer

Thank you for purchasing this product.

For optimum performance and safety,

please read these instructions carefully.

Supplied Accessories

Check the packing carton for these accessories.

Model No.

SL-SX390

SL-SX388

Before connecting, operating or adjusting this product, please read these instructions

completely. Please keep this manual for future reference.

Operating Instructions

The model number and serial number

of this product can be found on either

the back or the bottom of the unit.

Please note them in the space provid-

ed below and keep for future refer-

ence.

MODEL NUMBER

SERIAL NUMBER

Concerning Compact Discs

Only compact discs bearing this mark can be used with this unit.

However, continued use of irregular shaped CDs can damage the unit.

If the surface is dirty

Wipe it with a damp cloth and then wipe dry.

Wipe from the center toward the outer circumference.

How to hold a disc

How to store the disc in its caseHow to remove a disc from its case

Wired remote control . . . . . . . . . . . . . . 1

(N2QCBD000023)

For U.S.A.

Stereo headphones. . . . . . . . . . . . . . . . 1

(RFEV716P-SS)

For Canada

Stereo earphones (L0BAB0000124). . . 1

PPC

Use numbers indicated in parentheses when asking for replacement parts.

(Only for U.S.A.) To order accessories contact 1-800-332-5368 or web site

(http://www.panasonic.com).

Panasonic Consumer Electronics Company, p

Division of Matsushita Electric Corporation of America

One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com

Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)

Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.ca

C 2001 Matsushita Electric Industrial Co., Ltd. RQT6190-2P F1101TR2082

Printed in Japan

This manual was printed with soy based ink.

Play surface (shiny surface)

Label side up

OPEN

HOLD

VOL

MEMORY

RECALL

MODE

Handling precautions

≥If you are taking the CD from a cold to

a warm environment, moisture may

form on the CD. Wipe this off with a

soft, dry, lint-free cloth before using the

CD.

≥Do not write on the label side with a

ball-point pen or other writing instru-

ment.

≥Do not use record cleaning sprays,

benzine, thinner, static electricity pre-

vention liquids or any other solvent.

≥Do not attach labels or stickers to CDs.

(Do not use CDs with exposed adhe-

sive from tape or left over peeled off

stickers.)

≥Do not use scratch-proof protectors

etc.

Storage precautions

Be sure to store CDs in their cases to

protect them from dust, scratches, and

warping.

Do not place or store CDs in the

following places

≥Locations exposed to direct sunlight

≥Humid or dusty locations

≥Locations directly exposed to a heat

vent or heating appliance

≥In the glove compartment or on the

rear deck of an automobile

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating instruc-

tions handy for future reference.

:indicates a feature which can be enjoyed with SL-SX390.

:SL-SX388 only.

SL-SX390

SL-SX388

Stereo headphones . . . . . . . . . . . . . . . 1

(L0BAD0000157)

HOLD

VOL

MEMORY

RECALL

MODE

OPEN

DBBCC

KJ I

DC IN 4.5V

OPEN

HOLD

EQ HOLD

VOL

ABC

This function causes the unit to ignore

short, accidental button presses. (The

disc lid can still be opened and closed.)

The HOLD function prevents the

following:

≥The unit is powered on accidentally

when not in use, causing the batteries

to run down.

≥A button is accidentally pressed during

play, interrupting the operation.

To use the HOLD function

Set [HOLD] to the HOLD position.

The unit and wired remote control have HOLD

functions, each of which works independently.

“(” indication

When the unit is in HOLD mode, press-

ing any button causes the indication

“(” to appear on the display.

When the unit is powered off

The “(” indication appears only

when [1/;] (main unit) is pressed.

Power Supply Preparations

Refer to the specifications (page 8) for information on operating times when using dry cell batteries.

Using the AC adaptor

(not included)

Use only the recommended AC adaptor. Use of other

AC adaptors can damage the unit.

Connect the AC adaptor.

Conserving power

To save power when the unit is not to be used for a long

time, unplug the AC adaptor from the household AC

outlet. Reprogram tracks if necessary before use.

Note!

Turn the unit off before connecting or disconnecting the

AC adaptor.

Using dry cell batteries

(not included)

Insert two “LR6, AA, UM-3” alkaline bat-

teries.

Battery indicator

This indicator flashes when the batteries are almost out

of power. Power is cut off completely a short while later.

Replace batteries with new ones.

Note!

The length of time the unit will continue to operate be-

tween when the battery indicator starts flashing and

when the power is cut off differs depending on the type

of batteries used.

Using the car adaptor

(not included)

Use only the recommended car adaptor. Use of other

car adaptors can damage the unit.

Be sure to obtain the car adaptor (SH-CDC9) available

as an optional accessory.

Removing batteries

Push up on the battery

in the direction indicat-

ed by the arrow. Then

lift it out.

If the battery lid

comes loose

Slide the lid back into

place horizontally.

If the unit malfunctions or freezes during use,

disconnect the power source (the AC adaptor

or batteries).

Re-connect the power source and continue op-

eration.

OPEN

DC IN 4.5V

CAUTION:

Use only car adaptor, Model: SH-CDC9 manufac-

tured by Matsushita Electric Industrial Co.,Ltd.

DC IN jack (DC IN 4.5 V K)

Back panel of the unit

Household

AC outlet

AC adaptor

OPEN

S-XBS

TRAIN

RANDOM

VOL

Battery indicator

Location of Controls

Portable CD Player A

AStop/operation off button (∫)

BSkip/search buttons

(:, 9)

CHeadphone volume control

buttons (j,VOL, i)

DEQ button (EQ)

EDisplay

FMode button (MODE)

GMemory/recall button

(MEMORY/RECALL)

HPlay/pause button (1/;)

IOpen switch (OPEN 1)

JHeadphone jack (Ë)

KHold switch (HOLD)

LHole for car mounting base

MDC IN jack

(DC IN 4.5 V K)

NCD release button (PUSH)

Wired remote control

ASkip/search buttons

(:, 9)

BPlay/stop/operation off button

(∫/1)

CVolume control buttons

(j, VOL, i)

DHeadphone jack/ earphone

jack

EClip

FHold switch (HOLD)

GEQ button (EQ)

HPlug

OPEN

HOLD

VOL

MEMORY

RECALL

MODE

HOLD

EQ HOLD

HOLD

Back panel of the unit

HOLD mode

Before operating the buttons

Be sure to move [HOLD] to release

the unit from the HOLD mode.

HOLD Function

For U.S.A.

To order the optional AC adaptor RP-AC46 contact 1-

800-332-5368 or web site (http://www.panasonic.com).

For Canada

Be sure to obtain the optional AC adaptor RP-AC46.

It is available through your Panasonic dealer.

Note!

The dry cell batteries should be changed when the unit is off.

Using rechargeable batteries

(not included)

≥

If rechargeable batteries are to be used, rechargeable

batteries manufactured by Panasonic are recommended.

≥This unit cannot recharge batteries. The battery indi-

cator will not function correctly when using recharge-

able batteries.

SL-SX390

Button Display/reference

Operation

To pause play

To stop play

To turn off the

unit

Skip forward/

backward

(skip function)

Rapid forward/

backward

(search function)

Off mode

Stop mode

Sequential Play Basic Play

Follow steps 1–5.

In step 2: Connect the stereo headphones/earphones and wired remote control (SL-SX390) to the headphone jack

[Ë]. (Plug in firmly.)

In step 5: The volume range is 0-25. Press and hold to change the volume successively. The volume changes when

pressed while the level is displayed. If any other display is shown, it changes to show the current level. (The

volume returns to 10 when you disconnect the power source.)

≥Play stops automatically when all the tracks have been played.

≥If the unit has been connected to the car audio system, set this unit’s volume to 10, then adjust the volume level on

the system.

For your reference:

“)” indication

This indication appears for about 30 seconds if [1/;] is

pressed when no disc is loaded in the unit or if the disc

is not properly secured.

“*” indication

This indication appears for about 10 minutes when the

cover is opened. (However, the indication does not ap-

pear when the unit is powered off.)

Removing discs

1Press [∫] to stop play and disc rotation.

2Slide [OPEN 1] to open the lid.

3Press [PUSH] to release the disc.

Do not stop the disc by hand or try to remove it before it

stops rotating. This can damage CDs.

Note!

Never insert foreign objects into the unit.

Auto power off function

If the unit is left in stop mode for approximately 10 min-

utes, the unit powers itself off automatically in order to

prevent the battery from running down.

(If no disc is loaded in the unit, it powers itself off in

about 30 seconds.)

≥During program play (page 4), these buttons are

used to skip forward or backward through the

programmed sequence of tracks.

≥You cannot skip to tracks that have been played

in random or random repeat play (page 4).

≥During program play, 1-track repeat play, random

play and random repeat play (page 4), search op-

eration is limited to the current track only.

Press during play.

Press during stop mode.

Press during play.

(Press [:] twice to skip to the

beginning of the previous tracks.)

Press again to restart play.

Press and hold during play.

OPEN

HOLD

S-XBS

TRAIN

RANDOM

VOL

S-XBS

TRAIN

RANDOM

VOL

HOLD

VOL

MEMORY

RECALL

MODE

OPEN

1OPEN

OPEN

HOLD

VOL

Label must face upward.

Track number in play

Elapsed playing time of each track

Backward

Forward

S-XBS

TRAIN

RANDOM

VOL

S-XBS

TRAIN

RANDOM

VOL

S-XBS

TRAIN

RANDOM

VOL

S-XBS

TRAIN

RANDOM

VOL

Total number of tracks

Total playing time

Plug type:

3.5 mm (1/8 in.) stereo

Resume function notes

≥Opening the lid while in the stop mode or replacing the disc while in the off mode cancels the function. (It may re-

main active if you replace a disc in the off mode.)

≥Play may resume from the beginning of the next track if you stopped play near the end of a track.

≥The resume function works automatically and cannot be turned off.

IncreaseDecrease

Note on CD-R and CD-RW

This unit can play CD-DA format audio CD-R and

CD-RW that have been finalized§upon completion

of recording. It may not be able to play some CD-R

or CD-RW due to the condition of the recording.

§Finalizing is a process that enables CD-R/CD-RW

players to play audio CD-R and CD-RW.

Close the lid.

No indicator is shown.

Resume function

Play starts from the beginning of

the current track the next time you

press [1/;].

SL-SX390

Other Play Methods

Skip play

The disc plays from the specified track through to the

end, then play stops automatically.

Preparation: Put unit in stop mode.

1Select the desired track.

Changing the sound quality

Press during play or stop mode.

The setting switches in the sequence indicated below

each time [EQ] is pressed.

S-XBS>TRAIN>Cancel (no indicator is shown)

^==========b

S-XBS:

Select this setting to boost the low-range response.

TRAIN:

Select this setting to avoid annoying other passengers

with noise from your headphones/earphones while rid-

ing on the train, or to reduce fatigue when listening for a

long period of time.

Note!

The setting returns to S-XBS when you disconnect the

power source.

The letters such as Bin the various illustrations refer to the descriptions in the “Location of Controls” section (see page 2).

This system deals with skipping in a variety

of ways:

≥An anti-skip mechanism prevents skipping caused

when play speed changes due to swinging of the unit.

≥A recovery system immediately returns the laser pick-

up to its original position if it is knocked off the track by

a strong shock.

≥An anti skip memory (max. 48seconds) fills in interrup-

tions caused by bumps and vibrations.

The anti-skip system works automatically while the

system is on and cannot be canceled.

When bumps continue repeatedly

The elapsed playing time disappears and sound is inter-

rupted.

Anti-Skip System

S-XBS

TRAIN

RANDOM

VOL

Repeat play/Random play

Press during play or stop mode.

The setting is switched in the sequence indicated below

each time [MODE] is pressed.

1-track repeat (1 `)(----------------]

One track is repeated. |

All-track repeat (`)|

All the tracks on the disc are repeated. |

Random (RANDOM) |

The tracks play once each in random |

order and then play stops. |

Random repeat (RANDOM `)|

The tracks play repeatedly in random |

order. |

Cancel (no indicator is shown) --------------}

When pressed during program play

The setting is switched in the sequence indicated below

each time [MODE] is pressed.

1-track repeat (1 `M)(------------]

One track is repeated. |

Memory repeat (`M) |

The programmed tracks are repeated. |

Cancel (M) -------------------------------------------}

Note!

≥You can select the first track to play in random play

and random repeat play by pressing [9] while the

disc is stopped. All the tracks are played.

≥You cannot select random play or random repeat play

during program play.

≥The resume function does not work when random or

random repeat are on.

≥The mode is canceled when you disconnect the power

source.

MODE

Program play

Up to 24 tracks can be entered in the programmed se-

quence.

Preparation: Put unit in stop mode.

1Select the desired track.

2Register in sequence.

(The indication “M” and the programmed se-

quence appear on the display.)

3Repeat steps 1 and 2 to program all

the desired tracks.

∫To program the same track in the se-

quence more than once

∫After step 2, press [MEMORY/RECALL] desired

number of times.

∫If “'” is displayed

∫No more tracks can be programmed.

∫To confirm the contents of the program

∫Press [MEMORY/RECALL] while the disc is playing.

(The numbers of the programmed tracks appear on

the display in sequence.)

∫To delete the entire programmed se-

quence

∫Press [∫].

Note!

The repeat and random play modes are canceled after

steps 1 and 2.

MEMORY

RECALL

Note!

≥While the system is on, the disc rotates at a higher

rate than usual in collecting extra audio data. This

could result in a slight increase in disc rotation noise.

≥The anti-skip memory compresses digital signals.

RQT6190

Using the Unit with Optional Accessories

Using the Wired Remote Control

To start play

To stop play

To turn off

the unit

The remote control can be operated regardless of the

HOLD mode of the unit.

Preparation:

Release the remote control from the HOLD mode.

∫Operation confirmation tones

»When an operation button is pressed, a confirmation

tone sounds. Refer to the parentheses in the illustra-

tion for the different types of confirmation tones.

∫Turning the operation tones off and on

»While stopped or during play

»Press and hold [EQ] on the remote control for 5 sec-

onds until the unit's display appears. The tone

sounds when the setting is changed.

Basic operation

Skipping

tracks

Searching

through tracks

To adjust the

volume

Press once during off or stop mode.

Press once during play.

Press and hold during play or stop

mode.

EQ HOLD

HOLD

VOL

(Beep)

(Beep...Beep)

(Beep...Bee...p)

Changing the sound quality

Press during play or stop mode.

Press during play.

(Press [:] twice to skip to the beginning of

the previous tracks.)

Press and hold during play.

VOL

Forward

(Beep Beep)

Backward

(Beep Beep Beep)

≥The volume range is 0–25. (Press and hold

to change the volume successively.)

≥A tone (beep-beep) sounds when you

reach the minimum or maximum volume.

Decrease

(Beep) Increase

(Beep)

EQ HOLD

The setting switches in the sequence indicated below each time

[EQ] is pressed.

S-XBS>TRAIN>Cancel (no indicator is shown)

^==========b

S-XBS:

Select this setting to boost the low-range response.

TRAIN:

Select this setting to avoid annoying other passengers with noise

from your headphones/earphones while riding on the train, or to

reduce fatigue when listening for a long period of time.

Note!

The setting returns to S-XBS when you disconnect the power

source.

To turn the tone off To turn the tone on

EQ HOLD

(Beep)

OPEN

HOLD

VOL

MEMORY

RECALL

MODE

VOL

Headphone jack (Ë)

Other equipment

(White)

(Red)

Stereo connection cable (not included)

To CD or

AUX

terminals

1Remove the screw from

the bracket at the rear

of the car mounting

base.

Replace the screw in the

lower hole of the bracket.

Bracket

Screwdriver

Using the unit with an audio system Using the unit with a car audio

system

Items to be purchased

For connection to the car audio system

Car stereo cassette adaptor (SH-CDM10A)

Connect the car stereo cassette adaptor to [Ë] on

the unit.

(When doing this, set this unit’s volume to 10.)

For securing the unit and connecting the power

supply:

≥Car adaptor (SH-CDC9)

≥Car mounting kit (SH-CDF20)

Note when using the car mounting kit (SH-CDF20)

Note!

≥When you switch off the car, volume and sound quality

may return to the original settings and the resume

function may work even if you change the disc.

≥It may not be possible to use the unit with some types

of car stereos owing to restrictions imposed by the

construction of the car stereo cassette adaptor.

For further details, refer to the instructions of the part

concerned.

Turn off this unit and the other equipment before con-

nection.

1Connect the remote control to [Ë] on the unit.

2Connect the stereo connection cable to the re-

mote control and the other equipment.

≥The unit may malfunction if you connect directly to

[Ë] on the unit.

≥Do not connect the cable to the PHONO jacks on

the amplifier.

3Turn the operation tones off (see above) so they

are not heard when you press buttons on the re-

mote control.

4Set the volume to 10.

Make further volume adjustments with the other

equipment.

1Connect the stereo connection cable to [Ë] on the

unit.

2Set the volume to 10.

Make further volume adjustments with the other

equipment.

Note!

≥Obtain the optional connecting cable if the other equip-

ment comes with mini-phone jacks.

≥If you connect speakers (active or otherwise) directly to

the unit's headphone jack, ensure they have an imped-

ance of 1 k≠ or less.

(Beep)

SL-SX390

SL-SX388

Limited Warranty Coverage

If your product listed below does not work properly because of a defect in materials or

workmanship, Panasonic Consumer Electronics Company or Panasonic Sales

Company (collectively referred to as “the warrantor”) will, for the length of the period in-

dicated on the chart below, which starts with the date of original purchase (“warranty

period”), at its option either (a) repair your product with new or refurbished parts, or (b)

replace it with a new or a refurbished product. The decision to repair or replace will be

made by the warrantor.

During the “Labor” warranty period there will be no charge for labor. During the “Parts”

warranty period, there will be no charge for parts. You must mail-in your product during

the warranty period. This Limited Warranty excludes both parts and labor for batteries,

antennas, and cosmetic parts (cabinet). This warranty only applies to products pur-

chased and serviced in the United States or Puerto Rico. This warranty is extended

only to the original purchaser of a new product which was not sold “as is”. A purchase

receipt or other proof of the original purchase date is required for warranty service.

To obtain service in the USA please contact:

Panasonic Services Company, Panasonic Plus Department

20421 84th Avenue South

Kent, WA 98032

Tel: 1-800-833-9626 Fax: 1-800-237-9080

For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or

fax (787)-768-2910.

When shipping the unit carefully pack and send it prepaid, adequately insured and

preferably in the original carton. Include a letter detailing the complaint and provide a

day time phone number where you can be reached.

Customer Services Directory

Limited Warranty Limits And Exclusions

This warranty ONLY COVERS failures due to defects in materials or workmanship,

and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty

ALSO DOES NOT COVER damages which occurred in shipment, or failures which are

caused by products not supplied by the warrantor, or failures which result from acci-

dents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installa-

tion, set-up adjustments, misadjustment of consumer controls, improper maintenance,

power line surge, lightning damage, modification, introduction of sand, humidity or liq-

uids, commercial use such as hotel, office, restaurant, or other business or rental use

of the product, or service by anyone other than a Factory Servicenter or other

Authorized Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED

WARRANTY COVERAGE”.

THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT

OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for

lost time, cost of having someone remove or re-install an installed unit if applicable,

travel to and from the servicer, loss of or damage to media or images, data or other

memory or recorded content. The items listed are not exclusive, but are for illustration

only.)

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF

MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRAN-

TY.

Some states do not allow the exclusion or limitation of incidental or consequential dam-

ages, or limitations on how long an implied warranty lasts, so the exclusions may not

apply to you.

This warranty gives you specific legal rights and you may also have other rights which

vary from state to state. If a problem with this product develops during or after the war-

ranty period, you may contact your dealer or Servicenter. If the problem is not handled

to your satisfaction, then write to the warrantor's Consumer Affairs Department at the

addresses listed for the warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRAN-

TY, ARE YOUR RESPONSIBILITY.

ONLY FOR U.S.A.

Panasonic Audio Products Limited Warranty

Panasonic Consumer Electronics Company,

Division of Matsushita Electric Corporation of America

One Panasonic Way Secaucus, New Jersey 07094

Panasonic Sales Company, Division of Matsushita Electric

of Puerto Rico, Inc.

Ave. 65 de Infantería, Km. 9.5

San Gabriel Industrial Park, Carolina, Puerto Rico 00985

For Product Information, Operating Assistance, Literature Request,

Dealer Locations, and all Customer Service inquiries please contact:

1-800-211-PANA (7262), Monday–Friday 9 am–9 pm;

Saturday–Sunday 9 am–7 pm, EST.

Web Site: http://www.panasonic.com

You can purchase parts, accessories or locate your nearest servicenter by

visiting our Web Site.

Service in Puerto Rico

Matsushita Electric of Puerto Rico, Inc. Panasonic Sales

Company/Factory Servicenter:

Ave. 65 de Infanteria, Km. 9.5, San Gabriel Industrial Park, Carolina,

Puerto Rico 00985

Phone (787) 750-4300 Fax (787) 768-2910

Accessory Purchases:

1-800-332-5368 (Customer Orders Only)

Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032

(6 am to 5 pm Monday–Friday; 6 am to 10:30 am Saturday; PST)

(Visa, MasterCard, Discover Card, American Express, Check)

Product or Part Name

Radio, Clock Radio, Radio with Tape Player or

Recorder, Portable CD Player, Headphone

Stereo, Tape Recorder, Speaker

Rechargeable batteries (in exchange for

defective item)

SD Memory Card (in exchange for

defective item)

Parts

One (1) Year

Ten (10) Days

Ninety (90) Days

Labor

One (1) Year

Not Applicable

THE FOLLOWING APPLIES ONLY IN THE U.S.A.:

OPEN

HOLD

Air blower for

camera lens

Lens

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PROD-

UCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN,

MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON

THE APPARATUS.

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful inter-

ference in a residential installation. This equipment generates, uses and can ra-

diate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the

following measures:

≥Reorient or relocate the receiving antenna.

≥Increase the separation between the equipment and receiver.

≥Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

≥Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the

user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

DATE OF PURCHASE

DEALER NAME

DEALER ADDRESS

TELEPHONE NUMBER

User memo:

Maintaining the Lens

Open the lid and clean the lens as shown in the figure. Use a cotton swab to gently

wipe off any finger-prints.

Recommended product: Lens cleaner kit (SZZP1038C)

Product Service

1. Damage requiring service—The unit should be serviced by qualified service per-

sonnel if:

1. (a) The AC power supply cord or AC adaptor has been damaged; or

1. (b) Objects or liquids have gotten into the unit; or

1. (c) The unit has been exposed to rain; or

1. (d) The unit does not operate normally or exhibits a marked change in perfor-

mance; or

1. (e) The unit has been dropped or the cabinet damaged.

2. Servicing—Do not attempt to service the unit beyond that described in these op-

erating instructions. Refer all other servicing to authorized servicing personnel.

3. Replacement parts—When parts need replacing ensure the servicer uses parts

specified by the manufacturer or parts that have the same characteristics as the

original parts. Unauthorized substitutes may result in fire, electric shock, or other

hazards.

4. Safety check—After repairs or service, ask the servicer to perform safety checks

to confirm that the unit is in proper working condition.

Product information

For product information or assistance with product operation:

In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-

mail consumerproducts@panasonic.com, or web site (http://www.panasonic.com).

In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505,

web site (www.panasonic.ca.), or an authorized Servicentre closest to you.

Problem

Cannot close the cover.

Cannot play discs.

Tracks on disc do not

play in order, starting

with the first track.

Cannot hear music—

too noisy.

TV picture is distorted.

Radio reception is

noisy.

Specifications Troubleshooting Guide

Before requesting service, make the below checks. If you are in doubt about some of

the check points, or if the remedies indicated in the chart do not solve the problem:

In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262,

or e-mail consumerproducts@panasonic.com,

or web site (http://www.panasonic.com).

In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-

5505, web site (www.panasonic.ca), or an authorized Servicentre closest to

you.

Listening caution

Do not play your headphones or earphones at a high volume. Hearing experts advise

against continuous extended play.

If you experience a ringing in your ears, reduce volume or discontinue use.

Do not use while operating a motorized vehicle. It may create a traffic hazard and is

illegal in many areas.

You should use extreme caution or temporarily discontinue use in potentially haz-

ardous situations.

Even if your headphones or earphones are the open-air type designed to let you hear

outside sounds, don’t turn up the volume so high that you can’t hear what’s around

you.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher vol-

umes of sound. So what sounds “normal” can actually be loud and harmful to your

hearing.

Guard against this by setting your equipment at a safe level BEFORE your hearing

adapts.

To establish a safe level:

≥Start your volume control at a low setting.

≥Slowly increase the sound until you can hear it comfortably and clearly, and without

distortion.

Once you have established a comfortable sound level:

≥Leave it there.

Cautions

EST. 1924

Audio

No. of channels: 2 (left and right, stereo)

Frequency response: 20 to 20,000 Hz

(i0 dB to j7 dB)

DA converter: 1 bit, MASH

Headphone

output level: RMS max. 8 mWi8 mW/

16 ≠(adjustable)

Pickup

Light source: Semiconductor laser

Wavelength: 780 nm

General

Operational temperature

range: 0 eC–40 eC

(32 eF–104 eF)

Power supply: DC 4.5 V with optional

AC adaptor RP-AC46

Play time:

[When used in hold mode with EQ

canceled, at 25 eC (77 eF), on a flat,

stable surface]

≥The play time may be less depending

on the operating conditions.

≥Play time will be considerably reduced

when playing CD-RW.

Dimensions

(WaHaD): 128a26.3a131.5 mm

(51⁄16za11⁄32za53⁄16z)

Mass: 243 g(8.6 oz.) (with batteries)

197 g(6.9 oz.) (without batteries)

Note:

Specifications are subject to change

without notice.

Mass and dimensions are approximate.

Play time

About 40 hours

Check this

Is the disc properly secured in place?

≥Is the unit in HOLD mode?

≥Is the disc properly secured in place?

≥Is there condensation on the lens?

(Wait for about an hour and then try again.)

≥Is the disc dirty or scratched?

≥Is the random play mode on?

≥Did you stop play in the middle of the disc last

time?

≥Are the plugs dirty? (Wipe away dirt on plug.)

≥Separate the unit from mobile phones.

≥Have the headphone/earphone and the wired

remote control plugs inserted firmly?

≥Has the headphone plug inserted firmly?

Are you using the unit too near a TV or tuner?

(Keep the unit away from the TV or tuner.)

To prevent battery damage, electrolyte leakage and short-circuiting, heed the follow-

ing points.

≥Do not peel off the covering on batteries and do not use if the covering has been

peeled off.

≥Align the poles +and -correctly when inserting the batteries.

≥Do not mix different types of batteries or old and new batteries.

≥Remove the batteries if you do not intend to use the unit for a long time.

≥Do not throw into fire, short-circuit, disassemble, or subject to excessive heat.

≥Do not attempt to recharge dry cell batteries.

≥Do not allow metal objects to touch the battery terminals as this may cause short-

circuiting which is dangerous.

≥When carrying batteries in a pocket or bag, ensure no metal objects such as neck-

laces are placed together with them. Contact with metal may cause short-circuiting

which can cause a fire.

When driving a car

In the interest of traffic safety, do not operate the unit while driving.

Discontinue use if you experience discomfort with the headphones, earphones or

any other parts that directly contact your skin. Continued use may cause rashes

or other allergic reactions.

Care of dry cell batteries

Batteries used

2 alkaline batteries

SL-SX388

SL-SX390

Panasonic SL SX390 User Manual To The F568fd89 F7e8 400b A7c4 150c24f792a5

Navigation menu

Versions of this User Manual:

Views

Navigation