Pandigital Pi8004W01 Users Manual UGE_PI8004W01_v1.3_06 19 09

pi8004w01 3243bb62-dc69-457c-8c41-e23c4d95223d Pandigital Camera Lens PI8004W01 User Guide |

2015-02-04

: Pandigital Pandigital-Pi8004W01-Users-Manual-374646 pandigital-pi8004w01-users-manual-374646 pandigital pdf

Open the PDF directly: View PDF .
Page Count: 54

Digital Photo Frame

User Guide

PI8004W01

Effortlessly Moving Images Out of your Camera and Into your Life

Qualify to win a FREE

digital photo frame!*

(valid for USA only)

1-year warranty!**

*For details, go to our website: www.pandigital.net

**The online signup is for the purpose of user and product registration. Failure to register

does not in any way diminish any of your standard warranty rights, as described in the

documentation included with your product.

NOTE: If you must mail your 1-year registration, please send your name, address,

phone number, model & serial number, and when & where purchased to:

Pandigital, P.O. Box 2969, Dublin, CA 94568-2969 USA

Year

http://www.pandigital.net

Note: Your frame style and features may differ from those documented in this User Guide.

UG-E_PI8004W01_V1.3_06-09

Table of Contents

Introduction .................................................................................................. 7

Overview of the DPF .................................................................................... 8

Remote Control ............................................................................................ 8

Control Buttons on DPF ............................................................................ 10

Getting Started ........................................................................................... 11

The HOME Screen ...................................................................................... 11

Setup Menu Overview ................................................................................ 12

About Selecting Options ........................................................................... 13

Select Media Source .................................................................................. 13

PHOTOS ...................................................................................................... 14

Photo Thumbnails .................................................................................................. 14

View Individual Photo during a Slideshow ............................................................. 15

Zoom or Rotate Photos ......................................................................................... 15

Adjust Screen Colors ............................................................................................. 16

Optimal Image Display .......................................................................................... 16

Photo Import Method ............................................................................................. 16

Display Current Time with Photos ......................................................................... 17

Display Photo File Date/Time Stamp with Photos ................................................. 17

Import Photos into Internal Memory ....................................................................... 17

Delete Photos from Internal Memory ..................................................................... 18

PHOTO SLIDESHOWS ............................................................................... 18

Slideshow of Photos in Internal Memory ............................................................... 19

Slideshow of Photos on your Media Source .......................................................... 19

Pause a Slideshow ................................................................................................ 19

Slideshow Folders ................................................................................................. 19

Slideshow Background Music ................................................................................ 21

Set Slideshow Music Mode ................................................................................... 21

Set Slideshow Interval ........................................................................................... 21

Set Slideshow Transition ....................................................................................... 22

Set Slideshow Shuffle ............................................................................................ 22

MUSIC ......................................................................................................... 23

Select Media Source for Music .............................................................................. 23

Playing Music Only ................................................................................................ 23

Music Repeat Mode ............................................................................................... 23

Import Music Files into Internal Memory ................................................................ 24

Delete Music Files from the Internal Memory ........................................................ 24

VIDEOS ....................................................................................................... 25

Select Media Source for Videos ............................................................................ 25

Watch a Video ....................................................................................................... 25

Video Repeat Mode ............................................................................................... 25

Import Video Files into Internal Memory ................................................................ 26

Delete Videos from the Internal Memory ............................................................... 26

CALENDAR/CLOCK ................................................................................... 27

Select Media Source for Calendar Slideshow........................................................ 27

Set Schedule ......................................................................................................... 28

Disable Schedule ................................................................................................... 28

Run the Schedule .................................................................................................. 28

Run Schedule from Slideshow .......................................................................... 29

Run Schedule from CALENDAR/CLOCK Screen ............................................. 29

Set Date and Time ................................................................................................. 29

Set Alarm ............................................................................................................... 30

RECIPES ..................................................................................................... 30

View Recipes in Cookbook .................................................................................... 31

Assign Recipes to ‘My Favorite Recipes’ ............................................................... 32

View the Recipes in ‘My Favorite Recipes’ ............................................................ 32

Copy or Reassign Recipes from one Category to Another .................................... 33

Unassign Recipes from ‘My Favorite Recipes’ ...................................................... 33

Wi-Fi ............................................................................................................ 34

Set up DPF to connect to Photo Sharing Websites ............................................... 34

The Virtual Keyboard ............................................................................................. 34

Set up Wireless Network ....................................................................................... 35

Windows Live FrameIt ........................................................................................... 38

Photo Sharing Websites ........................................................................................ 40

DPF to PC – Wireless Connection ............................................................ 42

DPF to PC – USB Connection.................................................................... 43

USB Flash Drive to DPF Connection ........................................................ 46

Bluetooth Connection ........................................................................... 47

Set Sleep Mode ........................................................................................... 48

Set Language ............................................................................................. 48

Reset to Factory Defaults .......................................................................... 48

Frequently Asked Questions ..................................................................... 49

Important Safety Precautions ................................................................... 51

Technical Specifications ........................................................................... 52

Limited Warranty ........................................................................................ 53

FCC Statement ........................................................................................... 54

Introduction

Welcome to the Pandigital Multimedia Digital Photo Frame (DPF). Now

you can display your digital photos directly from your memory card, no

computer is necessary.

DPF Key Features

 Displays digital Photo files

 Plays digital Music files

 Plays digital Video files

 Displays Calendar/Clock with photo slideshow and Alarm function

 Includes Recipes from popular authors

 Offers wireless Wi-Fi connection to photo sharing websites and

DPF to PC file transfer

 Simple Plug & Play

 Does not require a computer

 Infrared Remote Control and control buttons on the frame

 1GB Internal Memory

 2 USB2.0 ports

Compatible Memory Cards

Compatible memory cards include: Secure Digital™ (SD), Compact

Flash (select models), MultiMedia Card™(MMC), xD Card, Memory

Stick™(MS), MemoryStick Pro™, and Memory Stick Pro Duo™*

* The Memory Stick Pro Duo™ requires an

additional adaptor to fit properly into the DPF

(not included). You can purchase the adaptor at

retail outlet stores that sell memory cards.

What’s in the Box

 Digital Photo Frame (DPF)

 AC Power Cord and Adapter

 Infrared Remote Control

 White and Charcoal Decorative Paper Mats

 USB Cable

 Quick Start Guide, User Guide

Overview of the DPF

(The memory card slots, ports, and jacks in your DPF may be different than those pictured here.)

Remote Control

You can access all of the DPF’s features, and perform all of the functions

by using the remote control. You will be able to perform several functions

with the remote control that are not possible with the top-back panel

control buttons.

Note: Before first time use, pull the plastic tab

sticking out of the remote control. It protects

the battery and the remote control will not work

unless it is removed.

Magnetized area

for storing

Remote Control

djustable

stand

USB Host

SD/MS/MS-Pro/

MMC/xD card slot

MENU EXIT ENTER

Right arrow Left arrow

Mini USB Device

Compact

Flash slot

Brightness

control

Power ON/OFF

power jack

Overview of Remote Control

Store Remote Control

You can avoid misplacing the remote control by safely storing it on

the back of the DPF when not in use.

The top back of the remote control has a built-in magnet and the

back of the DPF has a ‘magnetic area’ so you can simply attach the

remote control to the back of the DPF for safe keeping.

TIP: Remove sticker before use.

Exit or go back

Scroll Up

Scroll Previous

Play/Pause/Select object

Volume - adjust lower

or De-select object Enlarge image

Access Setup screens

Scroll Forward

Scroll Down

Volume adjust higher

or Select object Rotate image

Start Slideshow

Replace the Remote Control Battery

1. Hold the remote control with the buttons facing down.

2. Push and hold the small release tab while pulling the

battery tray out.

3. Replace the “CR2025” Lithium battery on the tray with

the positive (+) side facing up.

4. Push the tray back in until it clicks into place.

Control Buttons on DPF

You can perform many (but not all) of the DPF functions by using the

control buttons located on the top-back panel of the DPF. Their basic

functions are the same no matter when you use them.

TIP: The instructions throughout this User Guide only reference

the use of the remote control. However, you can use the

frame control buttons when the , ENTER, EXIT, and

MENU buttons are referenced when desired.

Button Action

Scroll left

ENTER Select the highlighted option, start a Slideshow, Play and Pause

Scroll right

EXIT Exit the current display, or go back a screen

MENU Displays function setup screens

Release tab

Getting Started

1. Plug the AC Power Adapter into the DPF’s DC power jack and an

electrical wall outlet.

2. Slide the power button on the left side of the DPF up to the ON

position.

3. If prompted, select the desired language for the user interface

display (varies by model).

4. After the initial start up screen is displayed, a slideshow will

automatically begin displaying the photos that are stored in the

internal memory.

5. To view your own photos, insert a memory card or USB flash drive

containing your photos into the appropriate slot/port on the DPF.

Press ENTER on Start Slideshow.

CAUTION: The cards and USB flash drive will only fit in one direction;

do not force them as this will damage the card reader or

USB port.

The HOME Screen

The six main DPF features, PHOTOS, MUSIC, VIDEO, CLOCK,

RECIPES, and Wi-Fi are accessed from the HOME screen.

To access the HOME screen while a slideshow is playing, press MENU.

PHOTOS

Display your photo files (.JPG or .JPEG) individually or as

slideshows. PHOTOS-Manage: set viewing preferences,

assign photos to category folders, import and delete photo

files (page 14)

MUSIC Play your MP3 music files. MUSIC-Manage: set listening

preferences, import and delete music files (page 23)

VIDEO Play your AVI video files. VIDEO-Manage: set viewing

preferences, import and delete video files (page 25)

Clock View clock and calendar with photo slideshow, and manage

the calendar, clock, and alarm settings (page 27)

Recipes View pre-loaded samples recipes and cookbooks (page 30)

Wi-Fi With the Pandigital Wi-Fi USB adapter (sold separately) you

can connect wirelessly for access to on-line photo sites

(page 34) and to your PC for file transfer (page 42)

Edit Quick access to single photo manage mode for Zooming,

Rotating, or Deleting currently displayed photo.

Setup Menu Overview

Use the Setup Menu for DPF functions to optimize your viewing/listening

preferences.

On the HOME screen press MENU to display the Setup Menu screen.

Select Media

Source

Select the media source for current viewing or

listening (page 13)

Wi-Fi Network

Setup

Set up wireless network to which you want to

connect (page 35)

Slideshow Setup Set multiple slideshow functions to optimize your

viewing preferences (page 18)

Adjust Screen

Colors Adjust LCD screen settings as desired (page 16)

Optimal Image

Display

Set photos to display as actual photo size, or

optimized to best fit the screen (page 16)

Photo Import

Method

Set photos to be imported compressed or

original resolution and file size (page 17)

Set Sleep Mode Power saving function (page 48)

Reset to Factory

Defaults

Returns all function settings to the factory

defaults (page 48)

Set Language Set DPF display language (page 48)

System Upgrade For firmware upgrades

About Selecting Options

Throughout this User Guide, when you are instructed to ‘select’ a function

option or button, unless otherwise instructed, use to highlight [the

referenced option], and then press ENTER to select.

Select Media Source

If you have inserted one or more external media sources (i.e., memory

card, USB flash drive), you can use the Select Media Source function to

switch between the internal memory and your external media source for

viewing your photos, videos, or listening to music.

You will also use this function to view the contents of the Slideshow

Folders after you assign photos to these folders (page 19).

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Select Media Source, and then select the desired media source

(sources not present will not be available).

Internal Memory = Built-in flash memory

SD/MMC = Secure DigitalTM / Multi MediaTM card

MS = Memory StickTM (Standard, Pro, and Duo)

xD = Standard flash memory card

CF = Compact Flash (not available in this model)

USB = Standard USB flash drive

Slideshow Folders = View photos after assigning to folders (page 19)

3. The Photo Thumbnails or Slideshow Folders selection screen will

be displayed.

PHOTOS

The PHOTOS feature includes many functions for optimizing and

customizing your viewing preferences. You can view your photos

individually or as slideshows with or without background music. Other

optional functions allow you to display the current time with your images,

adjust the screen colors, choose slideshow transitions, and even

schedule slideshows according to your weekly schedule.

Photo Thumbnails

1. On the HOME screen, select the PHOTOS-Manage button.

2. Use to scroll through individual photos, or use the

Page Up/Page Down arrows to scroll full pages.

3. To view an individual photo full screen, press ENTER on the

highlighted photo.

4. While the photo is displayed, you can use to view the

next/previous photos.

View Individual Photo during a Slideshow

1. With the desired photo displayed, press EXIT to pause the

slideshow.

2. The photo will be displayed approximately 15 seconds and then

the slideshow will automatically resume, or you can press ENTER

or SLIDESHOW to resume the slideshow.

Zoom or Rotate Photos

You can temporarily magnify or rotate photos while viewing them in

single photo view. The rotation of a photo will be saved only for

photos in the internal memory.

Zoom or Rotate a photo during a slideshow

1. With the photo displayed that needs rotating, press ZOOM

or ROTATE, multiple times if necessary, to achieve the

desired view.

2. Press

SLIDESHOW to resume the slideshow.

Zoom or Rotate a photo from the Photo Thumbnails screen

1. On the HOME screen, select the PHOTOS-Manage button.

2. On the

Photo Thumbnails screen, press ENTER to select

the desired photo to be magnified or rotated, and then press

ZOOM or ROTATE multiple times if necessary to achieve the

desired view.

3. Press

EXIT to return to the Photo Thumbnails screen.

TIP: When a photo is zoomed, you can pan around the photo by

using to view portions of the photo that are not

currently visible.

Adjust Screen Colors

You can adjust the four LCD color levels for optimal image viewing.

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Adjust Screen Colors.

3. Use to scroll through the LCD options, and use to

adjust the setting until the desired view is achieved.

4. Use to select Done.

Optimal Image Display

You can choose the desired display mode for displaying your photos

on the DPF as follows:

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Optimal Image Display, and then select the desired setting.

Original = Displays photos in actual photo size.

Optimal (default) = Optimizes the size and resolution to best fit the screen,

which may result in part of a photo not being visible on the screen.

Photo Import Method

When importing files into the internal memory from an external media

source, the file can be optimized or left as the original file size and

resolution.

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Photo Import Method, and then select the desired setting.

Optimized (default) = The photo file is downscaled in size and compressed

into a smaller sized JPEG, allowing more photos to be stored in the internal

memory.

Original = The photo file is stored keeping its original size and resolution

Display Current Time with Photos

You can have the current time displayed with your photos if desired.

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Slideshow Setup, and then use to select Yes or

No under Display Current Time.

3. Select

Done.

TIP: If the time is incorrect, refer to Set Date and Time on page 29

to set the clock.

Display Photo File Date/Time Stamp with Photos

Most digital cameras typically include a Date/Time stamp when

saving photo files. If your photo files contain this Date/Time

information, you can have it displayed with your photos if desired.

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Slideshow Setup, and then use to select Yes or

No under Display Photo Date/Time.

3. Select

Done.

Import Photos into Internal Memory

You can import your photo files from external media sources (i.e.,

memory card, USB flash drive) into the DPF’s internal memory. The

number of photo files you can import depends on file size and

available memory.

TIP: After starting an import, you can press EXIT to cancel the

import operation.

Import All Photos into Internal Memory

1. Insert your media source into the DPF. The memory card

option screen will be displayed.

2. Select

Import All Photos.

3. When import is complete, press EXIT to return to the

previous screen.

Import Individual Photos into Internal Memory

1. Insert your media source into the DPF. The memory card

option screen will be displayed.

2. Select

Select Photos to Import.

3. Use to scroll through the photos, and then press

‘+’ to select the desired photos to import (‘-‘ will deselect).

4. Press

MENU, and then select Import Selected Photos.

5. Press

EXIT to return to Photo Thumbnails screen.

Delete Photos from Internal Memory

You can delete photo files from the DPF’s internal memory, but not

from an external media source (i.e., memory card, USB flash drive).

Be sure you have Internal Memory as your selected media source.

TIP: It is recommended to make backup copies of the photos

before you delete them from the DPF.

1. On the

HOME screen, select the PHOTOS-Manage button.

2. To delete all photos, press MENU, and then select Delete All.

To delete individual photos, use to highlight the

photos you want to delete, press ‘+’ to select (‘-‘ will deselect),

press MENU, and then select Delete Selected.

3. A confirmation message appears; select Yes to delete the

photos, or No to keep the photos in the internal memory.

4. Press

EXIT to return to Photo Thumbnails screen.

TIP: If you select Yes by mistake, press EXIT to cancel the

delete operation. Photos already deleted will not be

automatically restored.

PHOTO SLIDESHOWS

The DPF can display all of the photos on the selected media source as a

slideshow, or you can select specific photos for a custom slideshow. You

can also have background music with your slideshows simply by storing

music MP3 files on your selected media source.

Slideshow of Photos in Internal Memory

You can play a slideshow of the photos stored in the DPF’s internal

memory by simply powering on the DPF (with no external media

source or wireless Wi-Fi adapter inserted*) and then wait for the

slideshow to automatically begin.

Slideshow of Photos on your Media Source

Insert an external media source and then power on the DPF; the

slideshow will begin displaying your photos (with no wireless Wi-Fi

adapter inserted*).

If you insert a media source after power on, a memory card option

screen is displayed; select Start Slideshow.

* If you have a Wireless Wi-Fi Adapter inserted in the DPF, and you

have previously connected with a wireless network, a message will

be displayed asking if you want to connect to the wireless network at

this time. If you select Yes, the DPF will connect to the network and

the Network options screen will be displayed. If you select No, the

HOME screen will be displayed; press Slideshow or wait

approximately 15 seconds for the slideshow to begin. (If no photos

exist on media source, the HOME screen will remain displayed.)

Pause a Slideshow

To pause a slideshow, press EXIT. The slideshow will pause for

approximately 15 seconds, and then the slideshow will automatically

resume. To resume immediately, press ENTER or SLIDESHOW.

Slideshow Folders

There are five category folders in the internal memory into which you

can assign photo files for personalized organization and slideshows

(these folder names cannot be changed):

Family – Friends – Vacation – Events – Others

Only photos stored in the internal memory can be assigned to the

slideshow folders. Assigned photos are not physically moved or

copied into the folders, rather, a link is assigned to the photo so it

appears to be located in the folder. If you delete the actual photo file

from internal memory, the link to the folder will also be deleted.

Assign Photos to Slideshow Folder

1. On the HOME screen, select the PHOTOS-Manage button.

2. On the

Photo Thumbnails screen, use to scroll

through your photos.

3. To assign an individual photo: With the desired photo

displayed, press MENU.

To assign multiple photos: Press ‘+’ to select desired photos

(‘-‘ will deselect), and then press MENU.

4. Select

Assign to Folder, and then select the desired

folder to assign the photo.

Play Slideshow from Slideshow Folder

1. On the HOME screen, press MENU.

2. Select

Select Media Source.

3. Select

Slideshow Folders.

4. Select the desired folder containing the photos you want to

view in your slideshow.

5. On the

Folders Thumbnails screen, press Slideshow.

Copy or Reassign Photos to Different Folders

After assigning photos to folders you can copy those photos to

other folders, or you can reassign photos to appear in a different

folder.

1. With the slideshow folders slideshow playing (per above

instructions), press EXIT twice to display the Folder

Thumbnails screen.

2. To copy or reassign an individual photo, highlight the desired

photo and then press MENU.

To copy or reassign multiple photos, use to

scroll through the photos, use ‘+’ to select those that you

want to copy or reassign (‘-‘ will deselect), and then press

MENU.

3. Select Copy to Folder or Reassign to Folder, and then

select the desired folder into which you want to reassign or

copy the photos.

Slideshow Background Music

To play background music during a slideshow, simply copy at least

one music MP3 file onto the same media source as your photos. The

music will automatically play as the slideshow is displayed.

If you have multiple MP3 files on your media source, each music file

will play in succession until all have been played, and then will repeat

according to the Music Repeat Mode setting (page 23).

Adjust the Volume

While the music is playing, press ‘+’ or ‘-‘ to adjust the volume.

Mute Slideshow Background Music

While the slideshow is playing, press ENTER to mute the

background music. The slideshow will continue to display without

the music until you press ENTER again.

Set Slideshow Music Mode

You can set the DPF to not play background music with your

slideshows, even if MP3 files are saved on your media source.

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Slideshow Setup.

3. Use to select Slideshow Music, and then use to

select your desired setting.

ON (default) = Play background music with slideshow

OFF = Do not play music with slideshow, even if MP3 files are stored on

selected media source

4. Select Done.

Set Slideshow Interval

You can set the speed at which the slideshow photos transition from

one to another.

1. On the HOME screen, press MENU to display the Setup Menu.

2. Select

Slideshow Setup,

3. Use to select Slideshow Interval, and then use to

select your desired setting.

5 (default), 10, 30, 60 seconds, 1 hour, or 24 hours

4. Select Done.

Set Slideshow Transition

You can set the transition ‘special effects’ as photos transition from

one to another during a slideshow.

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Slideshow Setup.

3. Use to select Slideshow Transition, and use to select

your desired setting.

Off = Photos transition from one photo to the next without special effects.

Random (default) = Photos will transition using all special effects randomly

throughout a slideshow.

Remaining special effects = Choose individual transition effect as desired

4. Select Done.

Set Slideshow Shuffle

You can set the slideshow to display your photos in a random

‘shuffle’ order, or display them in the order as stored on the selected

media source.

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Slideshow Setup.

3. Use to select Slideshow Shuffle, and then use to

select your desired setting.

ON = Displays photos randomly

OFF (default) = Displays photos in the order found on selected media source

4. Select Done.

MUSIC

Note: Music files must be standard MP3 format and not from licensed

music from download services.

Select Media Source for Music

When you have the MUSIC screen displayed, you can easily select a

different media source by selecting the current Media Source button

in the upper right corner and then select a different media source

from the Select Media screen.

Playing Music Only

1. On the HOME screen, select the MUSIC-Play button.

All present music files will be listed, and the first music file will

begin playing.

2. To pause the music, press ENTER; the music will remain paused

until you press ENTER again.

3. To play a different music file, simply use to scroll

through file names, and press ENTER to play.

Adjust the Volume

While the music is playing, press ‘+’ or ‘-‘ to adjust the volume.

Music Repeat Mode

By default, the Music Repeat Mode is set to continuously play all

music files found on the selected media source until you stop them. If

desired, you can change the repeat mode to play all music files only

once.

1. On the

HOME screen, select the MUSIC-Manage button. All

present music files will be listed.

2. Press

MENU, and then select Repeat to toggle ON/OFF.

Repeat ON (default) = continuously play all music files on the selected media

source until you stop them.

Repeat OFF = play the music files only once.

Import Music Files into Internal Memory

You can import your music files from external media sources (i.e.,

memory card, USB flash drive) into the DPF’s internal memory. The

number of music files you can import depends on file size and

available memory.

TIP: After starting an import, you can press EXIT to cancel the

import operation.

1. On the

HOME screen, select the MUSIC-Manage button. The

music files will be listed.

2. To import all music files, press MENU and then select

Import All.

To import individual music files, use to scroll through

the file names, press ‘+’ to select the files you want to import (‘-‘

will deselect), press MENU, and then select Import Selected.

Delete Music Files from the Internal Memory

You can delete music files only from the DPF’s internal memory. It is

recommended that you make backup copies of the music files before

deleting them.

Note: Internal Memory must be your selected media source.

1. On the

HOME screen, select the MUSIC-Manage button. The

music files will be listed.

2. To delete all files, press MENU and then select Delete All.

To delete individual files, use to scroll through the

file names, press ‘+’ to select the files you want to delete (‘-‘ will

deselect), press MENU, and then select Delete Selected.

3. A confirmation message appears. Select Yes to delete the music

files, or No to keep the music files in the internal memory.

TIP: If you select Yes by mistake, press EXIT to cancel the delete

operation. Music files already deleted will not be automatically

restored.

VIDEOS

The DPF supports motion JPEG AVI video files. If your movie file is not

in AVI format, you may have to convert the file by using a software video

converter which is easily found for purchase on the Internet.

Select Media Source for Videos

When you have the VIDEO screen displayed, you can easily select a

different media source by selecting the current Media Source button

in the upper right corner and then select a different media source

from the Select Media screen.

Watch a Video

1. On the HOME screen, select the VIDEO-Play button.

All present video files will be listed, and the first video will

begin playing.

2. To pause a video, press ENTER; the video will remain paused

until you press ENTER again.

3. Press

EXIT to stop the video.

Adjust the Volume

While the video is playing, press ‘+’ or ‘-‘ to adjust the volume.

Video Repeat Mode

By default, the Video Repeat Mode is set to continuously play all

video files found on the selected media source until you stop them. If

desired, you can change the Repeat Mode to play all video files only

once and automatically stop.

1. On the

HOME screen, select the VIDEO-Manage button. All

present video files will be listed.

2. Press

MENU.

3. Select

Repeat to toggle ON/OFF.

Repeat ON (default) = continuously play all video files on the selected media

source until you stop them.

Repeat OFF = play the video files only once.

Import Video Files into Internal Memory

You can import your video files from external media sources (i.e.,

memory card, USB flash drive) into the DPF’s internal memory. The

number of videos you can import depends on file size and available

memory.

TIP: After starting an import, you can press EXIT to cancel the

import operation.

Import Videos

1. On the HOME screen, select the VIDEO-Manage button. All

present video files will be listed.

2. To import all video files, press MENU and then select

Import All.

To import individual video files, use to scroll

through the file names, press ‘+’ to select the files you want

to import (‘-‘ will deselect), press MENU, and then select

Import Selected.

Delete Videos from the Internal Memory

You can delete video files only from the DPF’s internal memory. It is

recommended that you make backup copies of the video files before

deleting them.

Note: Internal Memory must be your selected media source.

1. On the

HOME screen, select the VIDEO-Manage button.

The video files will be listed.

2. To delete all files, press MENU and then select Delete All.

To delete individual files, use to scroll through

the file names, press ‘+’ to select the files you want to delete

(‘-‘ will deselect), press MENU, and then select Delete

Selected.

3. A confirmation message appears. Select Yes to delete the

video files, or No to keep the video files in the internal

memory.

TIP: If you select Yes by mistake, press EXIT to cancel the delete

operation. Video files already deleted will not be

automatically restored.

CALENDAR/CLOCK

Your DPF can be used as a personal desk calendar with a real-time

clock and alarm, and also displays a continuous slideshow of photos on

the selected media source.

To display the CALENDAR/CLOCK screen, select Clock from the HOME

screen. The slideshow will be displaying photos found on the currently

selected media source.

Select Media Source for Calendar Slideshow

You can easily change the media source if you want the

calendar/clock slideshow to display photos from a different media

source (i.e., memory card, slideshow folder).

1. On the

CALENDAR/CLOCK screen, press MENU, and then

select the current Media Source button in the upper right corner.

2. Select the desired media source from the Select Media screen.

Set Schedule

You can schedule the DPF to automatically go into a “stand-by”

mode and resume operation according to your weekly schedule.

For example, if you have your DPF on your desk at work, you may

want to display the calendar/clock or play a slideshow from 8:30am

to 5:30pm every weekday, and then set the DPF to remain in stand-

by mode throughout the weekend. The following Monday morning,

the DPF would resume operation at 8:30am.

1. On the

CALENDAR/CLOCK screen, press MENU.

2. Select

Set Schedule.

3. Use to move between the fields and to change the

field values in Weekdays On/Off.

4. To set the

Weekends On/Off, select the Enable Weekends

Schedule button, and then use to access the settings.

5. Use to move between the fields and to change the

field values in Weekends On/Off.

6. When correct times are set, select Done to return to the previous

screen.

Disable Schedule

After the schedule has been set (per above instructions), you can

disable the schedule whenever desired.

1. On the

CALENDAR/CLOCK screen, press MENU.

2. Select

Set Schedule, and then select the Enable Weekdays

Schedule or Enable Weekends Schedule button. The time fields

will display OFF.

3. Select

Done.

Run the Schedule

After the schedule times have been set (per above instructions), you

will use the Run Schedule function whenever you want the schedule

to take effect.

There are two methods for running the schedule, either from a

slideshow or from the CALENDAR/CLOCK screen.

CAUTION: After you select the Run Schedule function, any user

intervention will cancel the activation (i.e., pressing

remote or control button, powering off) and the schedule

will not take effect until you select this function again to

re-activate.

Run Schedule from Slideshow

1. Start a slideshow and press ENTER to select the Run Schedule

button when it appears in the lower left corner of the screen

(approx 10 sec).

2. To run the schedule when the Run Schedule button is no longer

displayed, restart your slideshow and then press ENTER to select

the Run Schedule button when it appears.

3. The DPF will go into stand-by mode according to the schedule,

and when it resumes operation, the slideshow will again begin

to play.

A small timer clock will appear indicating the schedule is active, and

then the DPF will operate according to the set schedule.

Run Schedule from CALENDAR/CLOCK Screen

1. On the CALENDAR/CLOCK screen, press MENU.

2. Select

Run Schedule.

3. The DPF will go into stand-by mode according to the schedule,

and when it resumes operation, the Calendar/Clock screen will

again be displayed.

A small timer clock will appear indicating the schedule is active, and

then the DPF will operate according to the set schedule.

Set Date and Time

1. On the CALENDAR/CLOCK screen, press MENU.

2. Select

Set Date/Time, and then select the options and use

to change the field values.

3. Select

Done.

Set Alarm

You can use your DPF as an alarm clock when desired. You can set

the frequency of the alarm, and set the alert to sound the built-in tone

or play your music file.

1. On the

CALENDAR/CLOCK screen, press MENU.

2. Select

Set Alarm, and then select the options and use to

change the field values.

Alarm = set the time you want the alarm to alert.

Frequency = set how often you want the alarm to alert (Once, Daily, Off)

Alert = set the alert to Music or default Tone (if music, the music file must

reside on the currently selected media when alarm is activated)

3. Select Done.

4. Press

EXIT to return to the CALENDAR/CLOCK screen.

When the alarm is set, a small alarm clock or music note will be

displayed indicating the alarm alert has been set to either the

default tone or music.

Note: At least one MP3 music file must be present on the selected

media source for the alert to play music. If you set the alert to

play music and there is no MP3 music file present, the default

tone will sound instead.

Turn Alarm Off

When the alarm sounds, press any button on the remote control

to stop it and return to the CLOCK/CALENDAR screen.

To cancel the alarm before its scheduled time, follow the previous

instructions for setting the alarm and set the frequency to OFF.

RECIPES

The DPF’s Recipes feature allows you to view recipes from popular

authors such as bon appétit and Good Housekeeping (sold separately on

our website http://www.pandigital.net).

Sample bon appétit seasonal recipes are included with this DPF so you

can experience how the recipe feature works when you purchase and

install the complete seasonal cookbooks.

Note: The Recipes feature is accessible only when the Internal

Memory is the selected media source (page 13.)

You will use these instructions for the pre-loaded sample recipes as well

as the complete cookbook collections.

View Recipes in Cookbook

1. On the HOME screen, select RECIPES.

2. Select

Sample Recipes (or select a Cookbook if you have added

seasonal cookbooks). The Cookbook Thumbnails screen will

be displayed.

3. Use to scroll through the recipes. (When highlighted,

the recipe name will be displayed at the top of the group.)

4. Press

ENTER to view a recipe in full screen.

TIP: With an individual recipe displayed:

a) press ZOOM to enlarge recipe

b) use to view previous or next recipe

c) press SLIDESHOW to view recipes in slideshow, press

EXIT to pause, and ENTER to resume

Assign Recipes to ‘My Favorite Recipes’

You can assign recipes from a main Cookbook into six food group

categories for quick and easy retrieval: Hors d’oeuvres, Soups,

Salads, Entrées, Desserts and Others. (The food group category

names are not changeable).

1. On the

HOME screen, select RECIPES.

2. Select

Sample Recipes (or select a Cookbook if you have added

seasonal cookbooks). The Cookbook Thumbnails screen will

be displayed.

3. Use to scroll through the recipes.

To assign an individual recipe: highlight desired recipe, press

MENU, and then select Assign to My Favorites.

To assign multiple recipes: press ‘+’ to select the desired

recipes, press MENU, and then select Assign to my Favorites.

4. Select the desired food group category into which you will assign

the recipes. A status message appears as the recipes are

assigned.

View the Recipes in ‘My Favorite Recipes’

After you have assigned recipes into the food group categories (per

instructions above) you can quickly view them at any time.

1. On the

RECIPES screen, select My Favorite Recipes.

2. Select the desired food group category to view.

3. On the

Food Group Thumbnails screen, use to

scroll through the recipes. (When highlighted, the recipe name

will be displayed at the top of the group.)

4. Press

ENTER to view a recipe in full screen view.

TIP: With an individual recipe displayed:

a) press ZOOM to enlarge recipe

b) use to view previous or next recipe

c) press SLIDESHOW to view recipes in slideshow, press

EXIT to pause, and ENTER to resume

Copy or Reassign Recipes from one Category to Another

After you have assigned recipes into food group categories, you can

reassign (move) or copy (duplicate) them from one category into

another when desired.

1. On the

RECIPES screen, select My Favorite Recipes.

2. Select the desired food group category from which you will

reassign recipes.

3. On the

Recipes Thumbnails screen, use to scroll

through the recipes, and then press ‘+’ to select recipes to

reassign.

4. Press

MENU, and then select Copy to Category or Reassign to

Category.

5. Select the desired food group category into which you will

reassign or copy the recipes. A status message appears as the

recipes are assigned or copied.

Unassign Recipes from ‘My Favorite Recipes’

When you unassign recipes from a category, you are only removing

the links to the recipes; you are not deleting the recipes. The actual

recipe files will remain in the main cookbook.

1. On the

RECIPES screen, select My Favorite Recipes.

2. Select the desired food group category from which you will

unassign recipes.

3. On the

Food Group Thumbnails screen, use to

scroll through the recipes, and then press ‘+’ to select recipes

you want to unassign.

4. Press

MENU, and then select Unassign. A status message

appears as the recipes are unassigned.

Wi-Fi

This feature allows a wireless connection with multiple online photo sharing

and streaming RSS content feed websites (i.e., Windows Live FrameIt).

You will be able to view images you have uploaded to these sites, as well

as receiving streaming news, weather, traffic, and other content feeds

directly through the DPF.

Use this feature to also connect wirelessly to your PC for easy file transfer

(page 42).

Set up DPF to connect to Photo Sharing Websites

Setting up your DPF to connect with the photo sharing websites

requires 3 steps:

A. Set up Wireless Network by assigning the wireless network ID

and password on the DPF.

B. Establish an account with the online photo sharing website and

upload your photos to their website. (The available online photo

sharing websites vary depending on the DPF models.)

C. Assign your photo sharing website User ID and password on

the DPF to connect with the site and view your uploaded photos

directly through the DPF.

The Virtual Keyboard

You will use a virtual keyboard for entering your wireless network ID

and password, as well as the User ID and Passwords associated

with your online photo sharing accounts.

Navigate the keyboard keys as follows:

 Use the remote control buttons to highlight the keys,

and then press ENTER, multiple times as needed, to select the

desired characters

 SYM = Access the following symbols:

\ / : ; ( ) $ & [ ] . , % ^ + = - | < > { } ! ~

 NUM = Toggles between numeric and letter characters

 ABC/abc = Toggles between upper and lower case letters

 = Scroll through your entry to edit as needed

 Backspace = Erases last selected character

 Done = Completes entry

 Cancel = Return to the previous screen without an entry

Note: You can also use the remote control buttons as follows:

‘+’ = Scroll forward

‘-‘ = Scroll back

ROTATE = Backspace, erases last selected character

ZOOM = Toggles between SYM / NUM / ABC / abc screens

Set up Wireless Network

Note: You must have an active wireless network within range of the

DPF, and the Pandigital wireless Wi-Fi USB Adapter must be

connected to the DPF. (Wi-Fi adapter sold separately on our

website: http://www.pandigital.net.)

1. Insert the Pandigital wireless USB adapter into the USB Host

port on the DPF.

2. On the

HOME screen, press MENU.

3. Select

Wi-Fi Network Setup. The Network Setup window will

be displayed, similar to this example:

4. Select Scan for Available Network. The wireless networks

within range will appear in the Network Setup window.

5. Select the desired Wi-Fi network to which you want to connect.

The network screen will be displayed, similar to this example:

TIP: If your wirless network is configured to be ‘hidden’, the scan

will not list it as an available network. Select one of the

Network SSID buttons to manually enter the Network ID.

6. If necessary, change the Secure Access type by pressing

ENTER on the option button multiple times to select the

appropriate security type.

7. Select Password, and then use the virtual keyboard to enter

your Wi-Fi Password. (The ID and password are case sensitive;

use the ‘ABC/abc’ ‘NUM’ and ‘SYM’ keys as needed for correct

characters.)

8. Select

Done on the virtual keyboard.

9. Select

Connect. Do not press any other keys until the

connection completes (20-30 seconds).

A connection status message will be displayed, and then the

MAC and IP address of the network to which you connected will

be displayed, similar to this example:

10. Select

Done. The Wi-Fi screen will now display the online photo

sharing site icons and the Connect to PC icon.

TIP: After making a successful connection with the wireless network,

whenever you re-power on or re-insert the Wi-Fi adapter, a

message will be displayed asking if you want to connect to the

wireless network at that time. If you select Yes, the DPF will

connect to the network and the Network options screen will be

displayed.

Windows Live FrameIt

You can wirelessly connect with Windows FrameIt, an online photo

sharing and streaming live RSS data feeds website for viewing live

News, Weather, Traffic, Sports, and more.

Connect with FrameIt

1. On the HOME screen, select Wi-Fi.

2. Select

FrameIt.

3. The DPF is pre-set to display the following live feeds when

you initially access Windows Live FrameIt:

 World News

 US Major City (weather)

 Sports

 MSNBC Top Stories

4. Select the RSS feed folder you want to view.

Establish Account and Connect with FrameIt

To view your own photos or other live feeds from FrameIt, you

must first establish a personal account with FrameIt; go to

http://frameit.live.com, set up an account, create collections, and

assign desired RSS feed content that you want to view on the

DPF.

1. After establishing your account with FrameIt, on the HOME

screen, select Wi-Fi.

2. The first time you connect to FrameIt, select the FrameIt-

User Settings button. The FrameIt screen will be displayed,

similar to the following example:

3. Select Get Claim Token 1. A new Claim Token will be

displayed, which you will need in the next step.

4. On your PC:

Go to http://frameit.live.com/device/claim.aspx to enter

the Claim Token, and then click Continue.

5. On the DPF:

On the FrameIt screen, be sure the Status changed from

Registration Required to Registered.

6. If applicable, repeat steps 3-5, selecting Get Claim Token 2

to connect with your second FrameIt account.

7. Select

Connect to display the Photo Sharing screen. The

FrameIt status should change from Setup Required to

Setup Done.

8. Proceed to step 2 in following View FrameIt RSS Feeds

instructions.

View FrameIt RSS Feeds

) IMPORTANT: This step assumes that you have already

successfully connected the DPF with the Windows

Live FrameIt site per previous instructions.

1. On the

HOME screen, select Wi-Fi.

2. On the

Photo Sharing screen, select FrameIt.

3. The RSS feed folders that you assigned on frameit.live.com

will be displayed; the titles will appear as you highlight the

folders. Press ENTER to display the contents of a highlighted

folder.

Wait for the feed data to appear; the length of time it takes to

appear depends on the amount of feed data contained within

the selected folder. For instance, a folder that contains a

large number of photos will take substantially longer to

display than when you select News or Weather feeds.

TIP: If you make changes to your Windows Live FrameIt account

while your DPF is connected (i.e., create new collections),

the new feed data will not display until you disconnect and

re-connect with FrameIt.

Import FrameIt Photos into Internal Memory

1. On the HOME screen, select Wi-Fi.

2. On the

Photo Sharing screen, select FrameIt, and then

select the desired folder containing photos you want to

import.

3. To import all photo files, press MENU and then select

Import All.

To import individual photo files, use to scroll

through the file names, press ‘+’ to select the files you want

to import (‘-‘ will deselect), press MENU, and then select

Import Selected.

Zoom Photos on FrameIt

1. With the photo displayed that you want to enlarge, press

ZOOM, multiple times if necessary to achieve desired view.

2. When complete, press

EXIT to resume viewing the photos.

Photo Sharing Websites

The DPF can connect wirelessly to popular online photo sharing

websites to which you have uploaded your photos, allowing you to

view the uploaded photos directly through the DPF.

Establish Accounts with Photo Sharing Websites

The online photo sharing websites that the DPF can access vary

depending on the DPF models, and could change without notice.

Follow these steps to determine which sites are available with

your DPF:

1. After completing the initial wireless network setup (page 35),

on the HOME screen, select Wi-Fi.

2. On the

Photo Sharing screen, use to highlight

the desired photo sharing site to which you want to connect.

3. When highlighted, the instructions for accessing the online

photo sharing website will be displayed. Follow these

instructions to establish your accounts with the desired

websites. (You can create two accounts with each photo

sharing website if desired.)

Connect DPF with Photo Sharing Websites

1. After establishing accounts with the online photo sharing

websites (per instructions above), on the HOME screen,

select Wi-Fi.

2. Select the

User Settings button associated with the desired

online photo sharing website.

3. Select

User ID 1 or 2, and then use the virtual keyboard to

enter your photo sharing account User ID.

4. Select

Password 1 or 2, and then use the virtual keyboard to

enter your photo sharing account Password.

5. Select

Connect.

TIP: The ID and password are case sensitive; if the ‘Connected

failed, please check ID and Password’ message appears,

you may need to re-enter them being careful to use the

appropriate upper/lower case characters.

6. Select

Connect.

7. When you are successfully connected, the albums or

collection folders you created in your photo sharing account

will be displayed.

8. Select a folder containing the photos you want to view. The

Folder Photo Thumbnails screen will be displayed.

9. To view a photo individually, use to scroll

through the photos and press ENTER on the desired photo.

Note: Functions like zoom and rotate are available and behave

in the same manner as described under the PHOTOS

section, beginning on page 14.

Import Photos from Photo Sharing Website into DPF’s

Internal Memory

1. On the HOME screen, select Wi-Fi.

2. On the

Photo Sharing screen, select the desired photo

sharing website, and then select the desired folder

containing photos you want to import.

3. To import all photo files, press MENU and then select

Import All.

To import individual photo files, use to scroll

through the file names, press ‘+’ to select the files you want

to import (‘-‘ will deselect), press MENU, and then select

Import Selected.

DPF to PC – Wireless Connection

You can connect the DPF to your PC wirelessly to transfer files from your

PC into the DPF’s internal memory.

Note: You must have an active wireless network within range of the DPF,

and the Pandigital wireless Wi-Fi USB Adapter must be connected

to the DPF. (Wi-Fi adapter sold separately on our website:

http://www.pandigital.net.)

Recommended Software

 Recommended Windows Media Player 11

Requires Windows XP SP3 or Vista SP2

 Recommended TwonkyMedia 5

Requires Macintosh OSX10.3 (Leopard)

Set up Universal Plug and Play (UPnP) Server

A UPnP Server must be set up on your computer before you will be

able to connect the DPF to your PC wirelessly.

Windows

Go to Microsoft’s website for instructions on setting up and

configuring your Windows UPnP Server:

http://www.microsoft.com/windows/windowsmedia/knowledgecen

ter/howto/mp11/sharemedia.aspx

Apple Macintosh

Go to the Twonky Vision website for instructions on setting up

and configuring your Macintosh UPnP Server:

http://www.twonkyvision.de/server_download.html

Connect DPF to PC Wirelessly

1. On the HOME screen, select Wi-Fi.

2. Select

Connect to PC, and then select the UPnP server to which

you want to connect.

3. The media categories will be displayed (i.e., pictures). Select the

category containing the files you want to import into the DPF.

4. To import all files within the selected folder, press MENU.

To import selected files, use the ‘+’ button to select each file

(‘-‘ will deselect), and then press MENU.

5. Select

Import All in this folder or Import Selected.

6. The image(s) will be transferred and the status of the transfer will

be displayed.

Zoom or Rotate Photos

1. With the photo displayed, you can enlarge or rotate it by

pressing ZOOM or ROTATE, multiple times if necessary to

achieve desired view.

2. When complete, press

EXIT to resume viewing the photos.

DPF to PC – USB Connection

You can connect the DPF to a Windows PC or Macintosh computer via

the USB cable (included) to copy files between the computer and the

DPF’s internal memory. If you have memory cards inserted in the DPF,

you can also copy between the PC, internal memory, and memory cards.

Connect DPF to Windows PC

1. Connect the small end of the USB cable to DPF’s Mini USB port,

and the larger end to an available USB port on your computer.

2. A window opens listing all drives connected to your computer,

similar to the following screen:

3. The internal memory (titled Pandigital) and each memory card

present in the DPF will be associated with one disk drive on your

computer.

) IMPORTANT: If your PC is connected to Local Area Network

drives, or if you have multiple drive letters already

assigned to peripheral devices, you will need to

manage your drive settings in Windows to free up

the four drive letters immediately following your

CD-ROM drive so the DPF can assign them to

memory card slots properly.

4. Double-click the desired drive to display the files on the card.

The following example shows a card listing several JPG images.

5. To copy files from a media source, select and drag them into the

DPF’s internal memory drive (Pandigital).

6. Similarly, to copy files from your computer to the internal

memory, first locate the files on your computer, select the files

you want to copy, and then drag and drop them into the

appropriate folder in the DPF’s internal memory drive.

TIP: Most cameras and graphic programs store photos in the

Windows XP ‘My Pictures’ or Vista ‘Pictures’ folder. If you didn’t

save them to any other location, you may find them there.

Disconnect DPF from Windows PC

It is important to always perform a safe PC ‘release’ before

disconnecting the DPF USB cable from the PC.

WARNING: Do not unplug or switch off the DPF when files are being

transferred, as that can seriously damage the memory.

Windows Vista

1. On the Windows System Tray, click the hardware removal

icon .

2. Click the Safely remove USB mass Storage device message

corresponding with the DPF device drive.

3. When the message “This device can now be safely removed

from the computer” appears, you can disconnect the USB cable

from your computer.

Windows XP

1. On the Windows System Tray, click the hardware removal

icon .

2. Click

Remove Hardware Safely.

3. Select the storage device corresponding with the DPF, and then

click Stop to disconnect. A final dialog box opens.

4. Click

Close.

5. When the message “It is now Safe to Disconnect Hardware”

appears, you can disconnect the USB cable from your computer.

Connect DPF to Macintosh Computer

1. Use the USB cable (included) to connect the DPF to your

Macintosh computer.

2. Macintosh will recognize the DPF as an external storage device.

3. Drag and drop files between the two devices as you normally

move files.

Disconnect DPF from Macintosh Computer

1. To safely disconnect the DPF from your Macintosh, select DPF’s

icon on your desktop and press Command-e to eject the disk.

2. When the icon is no longer on the desktop, it is safe to unplug

the USB cable.

USB Flash Drive to DPF Connection

The DPF recognizes a USB Flash Drive the same way it recognizes

external memory cards. When you insert the flash drive, the DPF

automatically recognizes photo, music, and video files stored on it.

To import files from your flash drive to the DPF’s internal memory, follow

the file import instructions under each feature section (Photos on page

14, Music on page 24, Video on page 26).

Bluetooth Connection

The Bluetooth feature allows you to download photos from popular

Bluetooth-capable mobile phones (i.e., BlackBerry, Motorola, Nokia,

SonyEricssson, and others) directly into your DPF.

A Bluetooth USB Adapter is required (not included with DPF)

Note: Phone models vary and not all phones support transmitting photos

to devices like a DPF. Check to be sure your phone supports

transmitting photos to external devices like DPF.

Insert Bluetooth Dongle

1. Insert your Bluetooth dongle into the DPF’s USB host port and then

turn on the DPF.

2. A popup window momentarily appears with the message “Bluetooth

Dongle Enabled” indicating the Bluetooth feature is active.

Send Photo to DPF

1. From your Bluetooth device, search for available connection devices;

select the Pandigital device (default authentication code “1234”).

2. Select the desired photo and then send to the DPF.

Note: The actual procedure for sending photos to the DPF varies by

mobile device manufacturer/model. Refer to your mobile device

User Guide for instructions.

During the photo transmission, “Photo Transmitting” appears on the DPF

screen. When completed, the photo(s) will automatically be displayed in

single photo mode.

Set Sleep Mode

The DPF will stay on until you power it off, however, to save power you

can set it to automatically go into a sleep mode when left idle for a

specific amount of time.

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Set Sleep Mode, and then select the desired setting.

OFF (default) = Power saver is ‘disabled’; DPF will remain on until you power it off

or change the sleep mode setting

2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the

specified amount of time

3. Select Done.

Set Language

Depending on model, this DPF may include multiple languages for the

user interface display.

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Set Language, and then select the desired language.

Reset to Factory Defaults

If you have changed function settings, using this feature will restore all

settings to the factory pre-set defaults.

CAUTION: This will reset all function settings, including the Wi-Fi network

user ID & password, online photo website user ID & passwords,

and schedule settings.

1. On the

HOME screen, press MENU to display the Setup Menu.

2. Select

Reset to Factory Defaults, and then select Yes to reset, or

No to leave current settings.

3. Press

EXIT to return to the HOME screen.

Frequently Asked Questions

Q: How do I set up my DPF?

A: It is very simple to get your Digital Photo Frame setup. Just plug the

power adapter into the DPF and into a standard wall outlet, and

then power it on. A slideshow will begin displaying the images pre-

loaded in the internal memory. To view your own photos, insert a

memory card or USB flash drive into the appropriate card slot or

USB port on the side of the DPF. Select Start Slideshow from the

memory card option screen.

Q: What memory cards can the Digital Photo Frame Read?

A: Compatible memory cards include: Secure Digital™ (SD), Compact

Flash (select models), MultiMedia Card™(MMC), xD Card, Memory

Stick™(MS), MemoryStick Pro™, and Memory Stick Pro Duo™.

Q: I set up the Digital Photo Frame; why won’t it turn on?

A: The power adapter may not be securely connected to the DPF or

the power switch may not be in the ON position.

Q: I have a memory card in the DPF; why can’t I view my photos?

A: A) Be sure that the memory card is one of the formats listed above and

that the files on the card are JPEG images files. Some digital cameras

save images in other formats. Refer to your camera’s user guide if your

photos are not JPEG files.

B) Make sure the memory card is inserted all the way into the card slot.

C) On the HOME screen, press MENU, choose Select Media Source,

select the desired media source, and then press ENTER. Press EXIT to

return to the HOME screen and then select the PHOTOS-PLAY button.

The slideshow should begin displaying your photos.

Q: Why is the photo display slower with some photos than others?

A: Higher resolution photos load more slowly. Try using lower resolution

photos or down scaling your images. Refer to your camera’s operating

user guide for details on down scaling your photos.

Q: Can I insert multiple memory cards?

A: Yes, you can insert multiple cards at the same time, depending on

slot availability. Use the ‘Select Media’ function to select the

desired media source for immediate viewing/listening.

Q: Does the DPF have built-in (internal) memory?

A: Yes. The memory size varies by model.

Q: Does the DPF support all JPEG and Motion JPEG files?

A: No. The DPF only supports JPEG and Motion JPEG files taken from a

digital camera. The DPF may not read all image files downloaded

from the Internet or from other software graphic applications.

Q: Can I add my own cookbook or recipes to the Recipes feature?

A: No. If you want to create .jpg files of your recipes using your own

graphics editing software, you can copy the .jpg files to your

memory source and then you could view them on the DPF in

PHOTOS mode.

Q: Which wireless Wi-Fi USB adapter can I use with my DPF, and

where can I obtain one?

A: Use only a Pandigital Wi-Fi adapter which is available for purchase

on our website at: http://www.pandigital.net.

Q: Where do I obtain a Bluetooth adapter to use with my DPF?

A: You can purchase any brand of Bluetooth adapter from any retail

outlet that sells them.

Q: I have the Pandigital wireless Wi-Fi adapter inserted, why can’t I

connect to the online photo sharing sites?

A: The initial Wi-Fi setup requires 3 steps: 1) Assign up your Wireless

Network connection on the DPF, 2) Establish an account with the

photo sharing site, and 3) Assign your photo sharing site’s User ID

and password on the DPF. Refer to the initial Wi-Fi setup on page 34.

Important Safety Precautions

Always follow these basic safety precautions when using your

Multimedia Digital Photo Frame (DPF). This will reduce the risk of fire,

electric shock, and injury.

WARNING: Do not expose this product to rain or moisture.

Do not remove the cover. There are no user-serviceable

parts inside. Refer all servicing to qualified personnel.

 The DPF is for indoor use only.

 Unplug the DPF before performing care and maintenance.

 Do not block the ventilation holes on the back of the DPF at any time.

 Keep your DPF out of direct sunlight and heat sources.

 Protect the power cord. Route power cords so that they are not likely to

be walked on or pinched by items placed on or against them. Pay

particular attention to the point where the cord attaches to the DPF.

 Only use the AC adapter included with the DPF. Using any other power

adapter will void your warranty.

 Unplug the power cord from the power outlet when the unit is not in use.

Cleaning the DPF

Treat the screen gently, it is made of glass and can break. To clean

fingerprints or dust from the LCD screen, we recommend using a

soft, non-abrasive cloth such as a camera lens cloth to clean the

LCD screen. If you use a commercial LCD Cleaning Kit, do not apply

the cleaning liquid directly to the LCD screen. Clean the LCD screen

with cleaning cloth moistened with the liquid.

Clean the outer surface of the DPF (excluding the screen) and the

remote control with a soft cloth dampened with water.

Technical Specifications

Product

Resolution 8” LCD Screen Digital Photo Frame

800X600 pixels, 4:3 aspect ratio

Compatible

Media Sources

6-in-one Card reader

Compact Flash, Secure Digital™, Multi Media Card™, xD

Memory Card™, Memory Stick™, Memory Stick PRO™,

Memory Stick PRO DUO, and USB Flash Drive

Features

 PHOTOS displayed individually or as slideshow

 MUSIC files played individually or as slideshow

background music

 VIDEOS

 CALENDAR/CLOCK with Alarm function and slideshow

 RECIPES – view pre-loaded and purchased cookbooks

 Wi-Fi - connect wirelessly to online photo sharing websites

 Wireless file transfer between DPF & PC

 Simple Plug & Play

 No computer required

File Format Photos – JPEG, JPG

Videos - motion JPEG, AVI

Music - MP3

USB Ports USB2.0 Host

USB2.0 Device

Internal Memory 1GB, up to 6400 compressed images

Bluetooth

Support Yes (adapter not included)

Wi-Fi Compatible Yes (Pandigital Wi-Fi adapter sold separately)

Decorative

Paper Mats 2 – White and Charcoal

Power Adapter Input: 100V - 240V AC, 50~60 HZ

Output: 5VDC 2.0A

Limited Warranty

The limited warranty set forth below is given by Pandigital with respect to

Pandigital brand electronics products purchased and used in the United States of

America. Pandigital warrants this product against defects in material or

workmanship as follows:

LABOR: For a period of one (1) year from the date of purchase, if this product is

found to be defective, Pandigital will repair or replace the product, at its option, at

no charge. After this one (1) year, labor charges will be charged on a case by

case basis.

PARTS: For a period of one (1) year from the date of purchase, if this product is

found to be defective, Pandigital will supply at no cost, new or rebuilt

replacement parts, at its option, at no charge. After this one (1) year period, parts

will be charged for on a case by case basis. Modifications not approved by the

party responsible for compliance could void user’s authority to operate the

equipment.

This warranty does not cover: (1) customer instruction, installation or setup; (2)

cosmetic damage or damage due to accident, misuse, abuse or negligence; (3)

commercial use of the product; (4) modification of any part of the product; (5)

damage due to improper operation, improper maintenance, or connection to an

improper power supply; (6) loss of data, regardless of value or format, that may

result through proper and/or improper use of the product; (7) damage due to an

attempted repair of the product by anyone other than a facility authorized by

Pandigital to service the product; (8) consumables (such as fuses and batteries).

This warranty is valid only in the United States.

The product must be accompanied by a copy of the original retail purchase

receipt. If no proof of purchase is attached, the warranty will not be honored and

repair costs will be charged. This warranty is only valid with written

documentation detailing the complaint attached to the outside or inside of the

carton. This warranty is invalid if the factory applied serial number has been

altered and or removed from the product. This warranty does not provide

protection for the loss of data, regardless of format. Pandigital reserves the right

to modify and design this product without prior notice, written or otherwise.

To obtain warranty service, you must deliver the product freight prepaid in either

its original packaging or packaging affording an equal degree of protection, plus

proof of purchase.

Repair or replacement as provided under this warranty is the exclusive remedy of

the consumer. Pandigital, its parent company, affiliates or subsidiaries, shall not

be liable for any incidental or consequential damages for breach of any

expressed or implied warranty on this product. Except to the extent prohibited by

applicable law, any implied warranty of merchantability or fitness for a particular

purpose on this product is limited in duration to the duration of this warranty.

Some states do not allow the exclusion or limitation of incidental or consequential

damages, or allow limitation on how long an implied warranty lasts, so the above

limitations or exclusions may not apply. This warranty gives you specific legal

rights, and you may have other rights, which vary from state to state.

All content included on the Pandigital website as well as Pandigital products,

including pre-loaded demonstration images, digital media, digital cookbooks, text,

graphics, logos, designs, photographs, button icons, images, audio/video clips,

digital downloads, data compilations, and software, is the property of Pandigital

or its suppliers and is protected by United States and international copyright laws

or other intellectual property laws and treaties. Said content shall not be

reproduced or used without express written permission from Pandigital and its

suppliers respectively.

Use of this product constitutes acceptance of these terms and conditions of

warranty.

Technical support telephone number: 1-800-715-5354.

FCC Statement

FCC Part 15 Information

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the Federal Communication Commission

(FCC) Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this unit not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

Pandigital Pi8004W01 Users Manual UGE_PI8004W01_v1.3_06 19 09

pi8004w01 3243bb62-dc69-457c-8c41-e23c4d95223d Pandigital Camera Lens PI8004W01 User Guide |

Navigation menu

Versions of this User Manual:

Views

Navigation