Pantech Co BUDDY Quad-band GSM/CDMA Phone with BT User Manual
Pantech Co Ltd Quad-band GSM/CDMA Phone with BT Users Manual
UserManual.wiki
>
Pantech Co
>
BUDDY User Manual
>
Users Manual
Contents
1.
Users Manual
2.
Manual
Users Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![22 23 01030405060702TURNING THE PHONE ON/OFFTURNING THE PHONE ON1. Press and hold the END Key until the display turns on. • If “ENTER LOCK CODE” appears on the display, press the OK Key to unlock the keypad, and enter your 4-digit lock code. • The default lock code is the last 4 digits of your phone number. TURNING THE PHONE OFF1. Press the OK Key to unlock the keypad, then press and hold the END Key until your display turns o. • Immediately change or recharge the battery when “BATTERY LOW” appears on the display. Memory may possibly be damaged if the phone turns o due to the battery completely draining. • Turn the phone o before removing or replacing the battery. If the phone is on, unsaved data may be lost.ACCESSING THE MENUYour phone can be customized via the menu. Each function can be accessed by pressing the Directional Key or by pressing the number that corresponds with the menu item.1. To access the home screen from idle mode, slide the phone up and press the OK Key [MENU].2. To scroll through the menu, press the Directional Key up or down or press the number that corresponds to the desired menu item.3. To return to the previous page, press the CLR Key . To exit the current menu and return to the home screen, press the END Key .4. From the home screen, press the OK Key to unlock the keypad, then press the Left Soft Key [ ] [Message] to open the Messages menu or press the Right Soft Key [ ] [Contacts] to open your Contact List. This manual assumes that Display Themes is set to White, and Menu Layout is set to List, which are the default settings.USING THE TASK BARThe Task Bar is an alternative way to cycle through menus, requiring fewer key presses. Toggle between the following menus:Dialing, Favorites, Recent Calls, Messaging, VZW Services, My Pictures, Contacts, Tools1. From the home screen, press the OK Key to unlock the keypad, then press the Task Bar Key .2. Press the Directional Key left or right to scroll through Task Bar menus. Press up or down to choose a sub menu.3. Select a desired task and press the OK Key . • Task Bar is not available for certain circumstances such as receiving an incoming call or message, displaying a notication message or displaying the main menu. • Once a menu is selected, it is dimmed and not selectable from the Task Bar.QUICK SWITCHING BETWEEN THE MAIN MENUSWhile a menu is being accessed, you can quickly switch between the other menu options.1. Slide the phone up and press the OK Key [MENU], then select a desired menu from the following main menus: Media Center, Messaging, Contacts, Recent Calls, Settings & Tools.2. Press the OK Key .3. Once a menu is selected, press the Directional Key left or right to switch between the menus.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-13.png)
![28 29 01030405060702Main Menu 2ND DEPTH 3RD DEPTH 4TH DEPTHSettings & Tools 9. Memory 1. Save Options 1. Pictures2. Videos3. Sounds2. Phone Memory 1. Phone Memory Usage2. My Pictures3. My Videos4. My Ringtones5. My Music6. My Sounds7. My Contacts8. Move All To Card3. Card Memory 1. Card Memory Usage2. My Pictures3. My Videos4. My Ringtones5. My Music6. My Sounds7. My Contacts8. Move All To Phone10. USB Mode11. Phone Info 1. My Number2. SW/HW Version3. Icon Glossary4. Software Update 1. Status2. Check New5. Operating System12. SIM Info13. Set up WizardMAKING A CALL1. Slide the phone up and enter the phone number (include the area code if needed). • To erase one digit at a time, press the CLR Key .• To erase the entire number, press and hold the CLR Key .• When you place or receive a call from phone numbers stored in your Contact List with a contact name, the name will be displayed.2. Press the SEND Key .3. To end a call, press the END Key . • If you activate the AUTO RETRY function, the phone will automatically re-dial the number (Refer to page 99).• You can also place calls using Voice-Activated Dialing. Please refer to page 61 for more details.ANSWERING CALLS1. When your phone rings or vibrates, slide the phone up or press the SEND Key to answer the incoming call. (Depending on your Answer Options, you may also answer incoming calls by pressing any key. Slide Open is the default setting for this device.)2. To ignore incoming calls, press the Right Soft Key [Ignore].3. To end a call, press the END Key . If Answer Options is set to “Auto with Handsfree”, calls are answered automatically after about ve seconds (Refer to page 99).](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-16.png)
![30 31 01030405060702MISSED CALL NOTIFICATIONWhen an incoming call is not answered, the Missed Call notication appears on the display.TO DISPLAY THE MISSED CALL ENTRY FROM THE NOTIFICATION SCREEN:1. Highlight View Now and press the OK Key .2. Press the OK Key [OPEN] to view the call details.TO DISPLAY A MISSED CALL ENTRY FROM IDLE MODE:1. Slide the phone up, press the OK Key [MENU], select Recent Calls, then press the OK Key .2. Press 1. Missed.3. Highlight the entry you wish to view, then press the OK Key [OPEN].4. To dial the phone number, press the SEND Key .WAIT/PAUSE FEATUREPauses are used for automated systems (i.e., voice mail or calling cards). Insert a pause after a phone number and then enter another group of numbers. The second set of numbers is dialed automatically after the pause. This feature is useful for dialing into systems that require a code.Add WaitThe phone stops dialing until you press the SEND Key or OK Key to advance to the next number.Add 2-Sec PauseThe phone waits 2 seconds before sending the next string of digits automatically.1. Slide the phone up and enter the phone number.2. Press the Right Soft Key [Options].3. Select Add 2-Sec Pause and press the OK Key .4. Enter additional number(s) (pin number or credit card number).5. Press the SEND Key to dial or the Left Soft Key [Save] to save.MAKING AN INTERNATIONAL CALL1. Slide the phone up, then press and hold the * Key . The + required for international calls appears.2. Enter the country code, area code, and phone number, then press the SEND Key .3. To end the call, press the END Key . If you set Assisted Dialing to On, the inputted phone numbers will be changed to the wrong number by the auto-correct function. 3-WAY CALLINGWith 3-Way Calling, you can talk to two people at the same time. When using this feature, normal airtime rates will be applied for each of the two calls.1. Slide the phone up, enter the phone number you wish to call, then press the SEND Key .2. Once you have established the connection, enter the second phone number you wish to call and then press the SEND Key .3. When you’re connected to the second party, press the SEND Key again to begin your 3-Way call. If one of the people you called hangs up during your call, you and the remaining caller stay connected. If you initiated the call and are the rst to hang up, all three calls will be disconnected.CALL WAITING FUNCTIONIf you are on a call and you receive another incoming call, you will hear a beep and the caller’s phone number will appear on the display. With Call Waiting, you may put the active call on hold while you answer the other incoming call. 1. To answer another call while on the phone, press the SEND Key . This places the rst call on hold. To switch back to the rst caller, press the SEND Key again.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-17.png)
![32 33 01030405060702CALLING A NUMBER FROM CONTACTS1. From idle mode, press the OK Key twise to unlock the keypad, then press the Right Soft Key [Contacts].2. Select the Contact entry and press the OK Key [VIEW], then select the desired phone number.3. Press the SEND Key to place the call. Selecting the Contact entry and then pressing the Send Key will dial the Default Number of the Contact entry automatically. ADJUSTING VOLUMETO ADJUST THE MASTER VOLUME:1. From idle mode, press the OK Key to unlock the keypad, then press the Volume Keys / up or down. 2. Select one of the following options and press the OK Key [SET] to save it.• All Sounds O• Alarm Only• Vibrate Only• Low / Medium Low / Medium / Medium High / High • Press the Volume Keys / up or down to adjust Earpiece volume during a call.CALLER ID FUNCTIONCaller ID displays the number of the person calling when your phone rings. If the caller’s identity is stored in Contacts, the name appears on the screen. The caller ID is stored in the Recent Calls menu. VIBRATE MODEVibrate Mode mutes key tones and alerts for an incoming call or message. To activate Vibrate Mode:1. Slide the phone up, then press and hold the Vibration Mode Key to activate vibration mode.2. To deactivate vibration mode, press and hold the Vibration Mode Key . SPEAKERPHONE MODEThe Speakerphone feature lets you hear audio through the speaker and talk without holding the phone.1. To activate, press the OK Key to unlock the keypad, then press the Speakerphone Key . To deactivate, press the Speakerphone Key again.USING AUTO KEYPAD LOCK FUNCTIONWhen the slide is closed the Side Keys and the Directional Key are locked. To unlock them, press any key on the external display with the phone in the closed position “PRESS OK TO UNLOCK KEYPAD” displays. Press the OK Key to unlock the keypad.AVAILABLE OPTIONS DURING A CALLDuring a phone call, you can access the following features by pressing the Right Soft Key [Options]:NEW MESSAGETo access the Messages Menu during a call:1. Press the Right Soft Key [Options], with New Message highlighted, press the OK Key .](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-18.png)
![34 35 01030405060702CONTACT LISTTo view your Contact List during a call:1. Press the Right Soft Key [Options], select Contact List and press the OK Key .RECENT CALLSTo view your Recent Calls list during a call:1. Press the Right Soft Key [Options], select Recent Calls and press the OK Key .BLUETOOTH MENUTo access the Bluetooth® Menu during a call:1. Press the Right Soft Key [Options], select Bluetooth and press the OK Key . If a Bluetooth Audio device is connected, Audio To Phone / Audio To Device is displayed in the options menu instead of Bluetooth.MAIN MENUTo access the Main Menu during a call:1. Press the Right Soft Key [Options], select Main Menu and press the OK Key .NOTEPAD +To compose notes during a call:1. Press the Right Soft Key [Options], select Notepad + and press the OK Key .VOICE PRIVACYTo turn the voice privacy feature On or O:1. Press the Right Soft Key [Options], select Voice Privacy and press the OK Key . The settings of Voice Privacy does not applied in GSM. MAKING AN EMERGENCY CALLThe E911 feature automatically places the phone in Emergency Call Mode when you dial the preprogrammed emergency number, “911”. It also operates in Lock Mode and out of the service area.911 IN LOCK MODETo make an emergency call in Lock Mode:1. Slide the phone up, enter “911”, then press the SEND Key .2. The call connects.3. The phone maintains Emergency Mode for 5 minutes. After the 5 minutes, the phone returns to Lock Mode.911 USING ANY AVAILABLE SYSTEMTo make an Emergency Call using any available system:1. Slide the phone up, enter “911”, then press the SEND Key .2. The call connects.3. The phone will stay in Emergency Mode for 5 minutes. While the phone is in the Emergency Mode for 5 minutes. After the 5 minutes, the phone can receive an incoming call from any available system or you can make outgoing calls even in the Emergency Callback Mode.DIALING LETTERSAllows you to dial the number associated with a specic word.For example, to call “1-800-FLOWERS”:1. Slide the phone up, enter “1-800”, then press the Mode Change Key .2. Enter “FLOWERS” with the QWERTY Keypad and press the SEND Key to connect. • If the Alphabetical Entry Mode icon is turned on, only capital letters will be appeared.• Pressing the Mode Change Key will change between Numeric Entry Mode and Alphabetical Entry Mode.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-19.png)
![38 39 01020405060703STORING A PHONE NUMBERThe Contact List stores up to 1000 entries.ADDING A NEW CONTACT1. Slide the phone up and enter the phone number you want to save.2. Press the Left Soft Key [Save].3. Select 1. Add New Contact and press the OK Key .4. Press the Directional Key up or down to select the type of phone number you want to save, then press the OK Key .Mobile 1 / Mobile 2 / Home / Business / Fax Use Update Existing to add another phone number to a contact already stored in memory.5. Enter a name for the phone number (up to 32 characters), then press the OK Key [SAVE].6. “CONTACT SAVED” displays, then the phone number reappears on the screen. Press the End Key to exit, or press the Send Key to call the number.OPTIONS TO CUSTOMIZE YOUR CONTACTSOnce the basic phone number and name information is stored in your Contacts, you can edit and/or customize the entries.1. Slide the phone up and press the Right Soft Key [Contacts], then highlight the Contact entry you want to edit.2. Press the Left Soft Key [Edit] to access the Edit Contact screen.3. Select the information eld you want to customize. Fields include:Name / Mobile 1 / Home / Business / Mobile 2 / Fax / Personal Email / Business Email / IM Screen Name / Pic/Video / Ringtone / Message Tone / Group / Home Address / Work Address / Company / Title / Birthday / Notes4. Change the data as necessary, then press the OK Key [SAVE] to update the contact entry.ADDING OR CHANGING GROUPSTo organize your Contacts into groups:1. Slide the phone up, press the Right Soft Key [Contacts], then highlight the desired Contact entry.2. Press the Left Soft Key [Edit].3. Highlight Group and press the Left Soft Key [Set / Edit]4. Select Business or Personal, then press the OK Key [MARK]. To create a new group, press the Right Soft Key [New], enter the new group name, then press the OK Key [SAVE].5. Press the Left Soft Key [Done] to set the group.6. Press the OK Key [SAVE] to update the contact entry.CHANGING THE CALL RINGTONETo identify who is calling by setting dierent ringtones for dierent phone numbers in your Contacts:1. From idle mode, press the OK Key to unlock the keypad, press the Right Soft Key [Contacts], then highlight the desired entry.2. Press the Left Soft Key [Edit].3. Highlight Ringtone, then press the Left Soft Key [Set].4. Select the new ringtone, then press the OK Key . Press the Left Soft Key [Play] to listen to a highlighted ringtone or press the Right Soft Key [Options] to view the le information before you press the OK Key .5. Press the OK Key [SAVE] to update the contact entry.ADDING OR CHANGING THE PIC/VIDEO IDTo select a picture or video to assign to a Caller ID:1. From idle mode, press the OK Key to unlock the keypad, press the Right Soft Key [Contacts], then highlight the desired entry.2. Press the Left Soft Key [Edit].](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-21.png)
![40 41 010204050607033. Highlight Pic/Video, and press the Left Soft Key [Set].4. Select 1. My Pictures or 2. My Videos, then press the OK Key .5. Press the Directional Key up, down, left or right to select a picture or a video, then press the OK Key .6. When completed, press the OK Key [SAVE] to update the contact entry.ADDING OR CHANGING AN EMAIL ADDRESSTo enter or add an Email address to a Contact entry:1. Slide the phone up, press the Right Soft Key [Contacts], then highlight the desired entry.2. Press the Left Soft Key [Edit].3. Highlight Personal Email / Business Email.4. Enter an Email address using the QWERTY Keypad, then press the OK Key [SAVE] to update the contact entry.ADDING A SPEED DIAL ENTRYTo add an entry to Speed Dial:1. From idle mode, press the OK Key to unlock the keypad, press the Right Soft Key [Contacts], then highlight a desired entry.2. Press the Left Soft Key [Edit].3. Highlight the phone number you want to add to Speed Dial, then press the Right Soft Key [Options].4. Select 1. Set Speed Dial, then press the OK Key .5. Select a Speed Dial location, then press the OK Key [SET].6. Select Yes and press the OK key .7. Press the OK Key [SAVE] to update the contact entry. You can slide the phone up, and using the QWERTY Keypad press the corresponding speed dial number to select the desired speed dial location.EDITING CONTACT ENTRIESADDING A PHONE NUMBER FROM IDLE MODE1. Slide the phone up and enter the phone number you want to save (up to 32 digits).2. Press the Left Soft Key [Save].3. Highlight 2. Update Existing, then press the OK Key .4. Highlight the existing Contact entry, then press the OK Key .5. Highlight the following phone number type, then press the OK Key .Mobile 1 / Mobile 2 / Home / Business / Fax6. If a phone number is already assigned to the type you selected, select Yes to overwrite the existing entry, then press the OK Key .7. “CONTACT UPDATED” displays, then the phone number reappears on the screen. Press the End Key to exit, or press the Send Key to call the number.ADDING A PHONE NUMBER FROM THE CONTACT LIST SCREEN1. Slide the phone up and press the Right Soft Key [Contacts]. Your Contacts are displayed alphabetically.2. Highlight the Contact entry you want to edit, then press the Left Soft Key [Edit].3. Highlight the phone number eld and enter the number, then press the OK Key [SAVE] to update the contact entry. A conrmation message appears.EDITING STORED PHONE NUMBERS1. Slide the phone up and press the Right Soft Key [Contacts]. Your Contacts are displayed alphabetically.2. Highlight the Contact entry you want to edit, then press the Left Soft Key [Edit].3. Select the phone number you want to edit.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-22.png)
![42 43 010204050607034. Edit the phone number as necessary, and then press the OK Key [SAVE] to update the contact entry.EDITING STORED NAMES1. Slide the phone up, then press the Right Soft Key [Contacts]. Your Contacts are displayed alphabetically.2. Highlight the Contact entry you want to edit, then press the Left Soft Key [Edit].3. Edit the name as necessary, and then press the OK Key [SAVE] to update the contact entry.DELETING A PHONE NUMBER FROM A CONTACT1. From idle mode, press the OK Key to unlock the keypad, then press the Right Soft Key [Contacts].2. Highlight the Contact entry, then press the Left Soft Key [Edit].3. Select the desired phone number to be deleted.4. Press and hold the Clear Key to delete the number.5. Press the OK Key [SAVE] to update the contact entry. A conrmation message appears.DELETING A CONTACT ENTRY1. From idle mode, press the OK Key to unlock the keypad, then press the Right Soft Key [Contacts].2. Select the desired Contact entry to be deleted.3. Press the Right Soft Key [Options], select 2. Erase and press the OK Key .4. Select Yes and press the OK Key . A conrmation message appears.DELETING A SPEED DIAL1. From idle mode, press the OK Key to unlock the keypad, then press the Right Soft Key [Contacts].2. Highlight the entry that has a speed dial to be deleted.3. Press the Left Soft Key [Edit].4. Highlight the phone number that has a speed dial to be deleted.5. Press the Right Soft Key [Options], select 1. Remove Speed Dial and press the OK Key .6. Select Yes and press the OK Key . A conrmation message appears.7. Press the OK Key [SAVE] to update the contact entry.DEFAULT NUMBERSThe phone number saved when a Contact is created is the Default Number. If more than one number is saved in a Contact entry, another number can be set as the Default Number. The Default Number cannot be deleted. The entire Contact entry can be deleted or another number can be assigned as the Default Number allowing you to delete the original number and keep the Contact entry.CHANGING THE DEFAULT NUMBER1. From idle mode, press the OK Key to unlock the keypad, then press the Right Soft Key [Contacts]. Your Contacts are displayed alphabetically.2. Highlight the Contact entry you want to edit, then press the Left Soft Key [Edit].3. Highlight the phone number you want to assign as the Default Number, then press the Right Soft Key [Options].4. Select 2. Set As Default, then press the OK Key .5. Select Yes and press the OK Key . A conrmation message appears.6. Press the OK Key [SAVE] to update the contact entry.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-23.png)
![44 45 01020405060703ENTERING LETTERS, NUMBERS & SYMBOLSYour device has a QWERTY Keypad that provides a superior typing experience on a smallhandheld device for easy and comfortable input.1. [ ] Mode Change Key:• When in Numeric entry mode- Press to change between entering numbers and letters that appear on the same key.• When in Text entry mode- Press to change between entering numbers and letters that appear on the same key.- Press and hold to lock in numeric or text entry mode.2. [ ] Word Change Key: When in text entry mode, press to select the next matching word.3. [ ] Space Key: Press to accept a word and add a space while entering letters. From idle mode, press to access the Notepad+ menu.12 3 4 58764. [ ] Symbols Key: Press to open the symbols list.5. [ ] Caps Key: Press to select a letter case for the standard text [Abc] input mode. [Abc], [ABC] and [abc] indicate the standard text input.6. [ ] Enter Key: Press to insert a carriage return.7. [ ] Delete Key: When in a Text entry eld and in entry mode, press to delete the character to the left of the cursor. Press and hold to delete the entire word or character string that was just entered.8. [ ] CLR Key: When in a Text entry eld and in entry mode, press to delete the character to the left of the cursor. Press and hold to delete the entire word or character string that was just entered. For best performance in low-light environments, your handset includes a backlight feature that can illuminate both the display and the keypad so you can keep reading and typing. (Please refer to page 85 for more details on Backlight.)](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-24.png)
![48 49 01020305060704CONTACTSNEW CONTACTTo add a new number to your Contact List: Using this submenu, the number is saved as a new Contact. To save the number into an existing Contact, edit the Contact entry.1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 1. New Contact.2. In the Name eld, enter a name for the Contact. To change the input mode, press the OK Key Left Soft Key [Abc], select the desired option, and press the OK Key .3. Press the Directional Key down to enter information in other elds for the contact. Fields include:Name / Mobile 1 / Home / Business / Mobile 2 / Fax / Personal Email / Business Email / IM Screen Name / Pic/Video / Ringtone / Message Tone /Group / Home Address / Work Address / Company / Title / Birthday / Notes4. Press the OK Key [SAVE] to create the contact entry. You can save ve contacts into the SIM with elds of name and phone number. When you save contacts, these are copied into SIM by choice. You can’t only save the contact into SIM but you can edit the contact in VZW SIM card.CONTACT LISTYou can review all the entries stored in your Contact List or quickly nd an entry by entering a name or its character string in the Go To eld.1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 2. Contact List. Shortcut: From idle mode, slide the phone up and press the OK Key Right Soft Key [Contacts]. The list of names in your contacts is displayed alphabetically.2. Enter a name or part of a name in the Go To eld at the bottom of the screen or press the Directional Key up or down to scroll through your Contact List.3. To edit the entry, press the Left Soft Key [Edit]. To view contact details, press the OK Key [VIEW].• By pressing the Right Soft Key [Options], you can choose from the following:1. New Contact: Add a new contact to your contact list.2. Erase: Deletes the contact from your contact list.3. New Message: Allows you to send a TXT Message to the contact.4. Set As ICE Contact: Set as an emergency contact.5. Call: Dial the contact.6. Copy & Move: Allows you to copy or move contacts with the following options: 1. Move to SIM / 2. Copy to SIM / 3. Move to Phone / 4. Copy to Phone7. Manage Contacts: Allows you to manage your contacts with the following options: 1. Erase / 2. Lock / 3. Unlock / 4. Copy To Card8. Show Contacts in: Allows you to change contacts in with the following options: 1. Phone & SIM / 2. Phone Only / 3. SIM Only9. Send Name Card: Allows you to send a name card via Bluetooth®.4. To dial the selected number, press the Right Soft Key [Options], select Call and press the OK Key or press the SEND Key to place a call. BACKUP ASSISTANTBackup Assistant is a wireless service that stores a copy of your Contact List to a secure web site.1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 3. Backup Assistant.2. Follow the on-screen prompts.GROUPSGroups allow you to classify phone entries into groups with up to 10 members in each group. The default groups include Family and Work and they cannot be erased or renamed.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-26.png)
![50 51 01020305060704TO ADD NEW GROUP1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 4. Groups.2. Press the Left Soft Key [New].3. Enter a new group name and press the OK Key [SAVE].TO ASSIGN PHONE NUMBER TO GROUP1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 4. Groups.2. Select the group where you want to add the contact, and then press the Right Soft Key [Options].3. Select 3. Add and press the OK Key .4. Your contact entries will be displayed in alphabetical order. Select the contact you want to add then press the OK Key [MARK].5. Press the Left Soft Key [Done]. “MEMBER LIST UPDATED” will be displayed.TO CHANGE GROUP NAME1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 4. Groups.2. Select the group you want to rename then press the Right Soft Key [Options].3. Select 5. Rename and press the OK Key .4. Enter the new group name, then press the OK Key [SAVE].ERASE GROUP1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 4. Groups.2. Select the existing group name that you want to erase, and then press the Right Soft Key [Options].3. Select 6. Erase Group and press the OK Key . 4. “ERASE GROUP?” will appear on the screen.5. Select Yes and press the OK Key . A conrmation message appears.TO SEND A TXT MESSAGE TO A GROUP1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 4. Groups.2. Select the group you want to send a message to, then press the Right Soft Key [Options].3. Press 1. New TXT Message.4. Input your message in the Text eld and then press the Right Soft Key [Options] to select from the following: Insert Quick Text, Save As Draft, Add, Format Text, Priority Level or Cancel Message.5. To send the TXT message, press the OK Key [SEND] or press the SEND Key .TO SEND A PICTURE MESSAGE TO A GROUP1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 4. Groups.2. Select the group you want to send a message to, then press the Right Soft Key [Options].3. Press 2. New Picture Message.4. Under Text, input your message and then press the Directional Key down.5. Under Picture, press the Left Soft Key [My Pics], select the picture you would like to send then press the OK Key . Press the Directional Key down.6. Under Sound, press the Left Soft Key [Sounds], select the sound you would like to send then press the OK Key . Press the Directional Key down.7. Under Name Card, press the Left Soft Key [Add], select 1. My Name Card or 2. From Contacts then press the OK Key . Select the desired card then press the OK Key . Press the Directional Key down.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-27.png)
![52 53 010203050607048. Under Subject, input a subject using the QWERTY Keypad.9. Press the Right Soft Key [Options] to select from the following: Preview, Save as Draft, Insert Quick Text, Add Slide, Priority Level or Cancel Message. These options will vary depending on the message contents chosen.10. To send the Picture Message, press the OK Key [SEND] or press the SEND Key .TO SEND A VIDEO MESSAGE TO A GROUP1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 4. Groups.2. Select the group you want to send a message to, then press the Right Soft Key [Options].3. Press 3. New Video Message.4. Under Text, input your message and then press the Directional Key down.5. Under Video, press the Left Soft Key [My Videos], select the video you would like to send then press the OK Key . Press the Directional Key down.6. Under Name Card, press the Left Soft Key [Add], select 1. My Name Card or 2. From Contacts then press the OK Key . Select the desired card then press the OK Key . Press the Directional Key down.7. Under Subject, input a subject using the QWERTY Keypad.8. Press the Right Soft Key [Options] to select from the following: Preview, Save as Draft, Insert Quick Text, Priority Level or Cancel Message. These options will vary depending on the message contents chosen.9. To send the Video Message, press the OK Key [SEND] or press the SEND Key .TO SEND A VOICE MESSAGE TO A GROUP1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 4. Groups.2. Select the group you want to send a voice message to, then press the Right Soft Key [Options].3. Press 4. New Voice Message.4. To record a new Voice Memo, press the OK Key to start recording, then press the OK Key [STOP] to nish recording and save the voice memo.5. Under Voice, your recorded le name will appear. Press the Directional Key down.6. Under Text, input your message then press the Directional Key down.7. Under Name Card, press the Left Soft Key [Add], select 1. My Name Card or 2. From Contacts then press the OK Key . Select the desired card then press the OK Key . Press the Directional Key down.8. Under Subject, input a subject using the QWERTY Keypad.9. Press the Right Soft Key [Options] to select from the following: Review, Save as Draft, Insert Quick Text, Priority Level or Cancel Message. These options will vary depending on the message contents chosen.10. To send the Voice Message, press the OK Key [SEND] or press the SEND Key .SPEED DIALSFrom idle mode, calls can be placed to numbers stored in speed dials by sliding the phone up, and pressing & holding the location number on the keypad.1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 5. Speed Dials.2. Highlight the desired Speed Dial position, or enter the Speed Dial digit, then press the OK Key [SET].](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-28.png)
![54 55 010203050607043. Select the desired Contact entry, then press the OK Key .4. Highlight the number you wish to set to speed dial then press the OK Key .5. “ASSIGN SPEED DIAL TO CONTACT?” appears on the screen. Select Yes and press the OK Key . A conrmation message appears. “Unassigned” appears if the location is available.TO ERASE A SAVED SPEED DIAL1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 5. Speed Dials.2. Select the Speed Dial entry you want to erase.3. Press the Right Soft Key [Remove].4. “REMOVE SPEED DIAL?” appears on the screen. Select Yes and press the OK Key . A conrmation message appears.IN CASE OF EMERGENCYYour phone has a special menu to organize your emergency contacts and personal information.TO ASSIGN EMERGENCY CONTACTSFollow the procedures below to register a Contact to be contacted in case of emergency, or to register a medical record number or other personal info. To register up to three dierent Contacts to ICE:1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 6. In Case of Emergency. Shortcut: From idle mode, slide the phone up and press the Right Soft Key [Contacts], then select In Case of Emergency and press the OK Key [VIEW].2. Select Contact 1, Contact 2 or Contact 3, then press the OK Key [ADD].3. To select a contact from the Contacts List, press 1. From Contacts, select the Contact entry, and then press the OK Key . To add a new contact as an ICE CONTACT, press 2. New Contact, enter the info, and then press the OK Key [SAVE].4. The Contact name will be displayed in the place of Contact 1, Contact 2 or Contact 3.TO REASSIGN EMERGENCY CONTACTS 1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 6. In Case of Emergency.2. Select the contact you want to re-assign, press the Right Soft Key [Options], then press 1. Re-assign.3. To select a contact from the Contacts List, press 1. From Contacts, select the Contact entry, and then press the OK Key . To reassign a new contact as an ICE CONTACT, press 2. New Contact, enter the info then press the OK Key [SAVE].4. A conrmation message appears.TO UNASSIGN EMERGENCY CONTACTS 1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 6. In Case of Emergency.2. Select the contact you want to unassign, then press the Right Soft Key [Options].3. Press 2. Unassign.4. A conrmation message appears.TO CALL AN ASSIGNED EMERGENCY CONTACT 1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 6. In Case of Emergency.2. Select the contact you want to call and then press the Left Soft Key [Call] or press the SEND Key .](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-29.png)
![56 57 01020305060704TO ADD PERSONAL INFOTo store a Medical Record Number or other information that may be useful in case of anemergency:1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 6. In Case of Emergency.2. Select Personal Info and then press the OK Key [VIEW].3. Select Note 1, Note 2 or Note 3 and then press the OK Key [ADD].4. Enter the information using the QWERTY Keypad and then press the OK Key [SAVE].5. The entered information now appears in the place of Note 1, Note 2 or Note 3.TO EDIT SAVED PERSONAL INFO1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 6. In Case of Emergency.2. Select Personal Info then press the OK Key [VIEW].3. Select the Note you want to edit then press the OK Key [VIEW].4. Press the OK Key [EDIT], edit the Note, then press the OK Key [SAVE].TO ERASE SAVED PERSONAL INFO1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 6. In Case of Emergency.2. Select Personal Info then press the OK Key [VIEW].3. Select the Note you want to erase then press the Right Soft Key [Erase].4. “ERASE NOTE?” will be displayed on the screen. Select Yes and press the OK Key . A conrmation message appears.MY NAME CARDA Name Card with the handset’s mobile number automatically appears.EDIT MY NAME CARD1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 7. My Name Card.2. Press the Left Soft Key [Edit].3. Edit the My Name Card options and then press the OK Key [SAVE] to save your changes.SEND MY NAME CARD1. Slide the phone up, press the OK Key [MENU], then press 6. Contacts, 7. My Name Card.2. Press the Right Soft Key [Send].3. Press 1. Send via TXT Message, 2. Send via Picture Message, 3. Send via Video Message, 4. Send via Voice Message or 5. Send via Via Bluetooth.• Send via TXT Message: Allows you to send TXT messages with the Name Card as an attachment.1. Enter the recipient’s contact information and press the OK Key .2. Enter your message in the Text eld and then press the OK Key [SEND].• Send via Picture Message: Allows you to send picture messages with the Name Card as an attachment.1. Enter the recipient’s contact information and press the OK Key .2. Compose your Picture Message and then press the OK Key [SEND]. Please refer to page 121 for more details on Picture Message.• Send via Video Message: Allows you to send video messages with the Name Card as an attachment.1. Enter the recipient’s contact information and press the OK Key .2. Compose your Video Message and then press the OK Key [SEND]. Please refer to page 122 for more details on Video Message.• Send via Voice Message: Allows you to send voice messages with the Name Card as an attachment.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-30.png)
![58 59 010203050607041. Press the OK Key to start recording a voice memo and press the OK Key [STOP] to nish recording and save the voice memo.2. Compose your Voice Message and then press the OK Key [SEND]. Please refer to page 123 for more details on Voice Message.• Send via Via Bluetooth: Allows you to send Name Card to another Bluetooth® device.1. Press 1. Add New Device. If the Bluetooth power is switched o, the following message will appear on the screen: “TURN BLUETOOTH POWER ON?”. Press the OK Key to select Yes.2. When “PLACE DEVICE YOU ARE CONNECTING TO IN DISCOVERABLE MODE” appears, press the OK Key to start searching Bluetooth devices.3. Press the Directional Key up or down to select a desired device and press the OK Key [PAIR]. Please refer to page 77 for more details on Bluetooth.4. The handset may prompt you for the passkey. Consult the Bluetooth accessory (sold separately) instructions for the appropriate passkey (typically “0000” - 4 zeroes). Enter the passkey, then press the OK Key .5. “Before Connecting To [Device Name]” will appear on the screen. Select Always Ask or Always Connect and press the OK Key .MISSEDDisplays information about the 90 most recently missed calls. Place a call to a missed call by simply pressing the SEND Key .1. Slide the phone up, press the OK Key [MENU], then press 7. Recent Calls, 1. Missed.2. Highlight an entry and do one of the following options:• Press the OK Key [OPEN] to view the entry.• Press the Send Key to place a call to the number.• Press the Right Soft Key [Options] to select:Erase: Deletes the call from Missed calls list.Lock/Unlock: Locks or unlocks the entry.Erase All: Deletes all entries from Missed calls list.View Timers: Displays usage time.Detail: View the information of the call.Save to Contact: Save the contact. After 90 missed calls, the oldest call will automatically be erased from the history.RECEIVEDDisplays information about the 90 most recently received calls. Place a call to a received call by simply pressing the SEND Key .1. Slide the phone up, press the OK Key [MENU], then press 7. Recent Calls, 2. Received.2. Highlight an entry and do one of the following options:• Press the OK Key [OPEN] to view the entry.• Press the Send Key to place a call to the number.• Press the Right Soft Key [Options] to select:Erase: Deletes the call from Received call list.Lock/Unlock: Locks or unlocks the entry.Erase All: Deletes all entries from Received call list.View Timers: Displays usage time.Detail: View the information of the call.Save to Contact: Save the contact. After 90 received calls, the oldest call will automatically be erased from the history.RECENT CALL](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-31.png)
![60 61 01020305060704DIALEDDisplays information about the 90 most recently dialed numbers. Place a call to a dialed call by simply pressing the SEND Key .1. Slide the phone up, press the OK Key [MENU], then press 7. Recent Calls, 3. Dialed.2. Highlight an entry and do one of the following options:• Press the OK Key [OPEN] to view the entry.• Press the Send Key to place a call to the number.• Press the Right Soft Key [Options] to select:Erase: Deletes the call from Dialed list.Lock/Unlock: Locks or unlocks the entry.Erase All: Deletes all entries from Dialed call list.View Timers: Displays usage time. After 90 dialed calls, the oldest call will automatically be erased from the history.BLOCKEDThis menu appears only when incoming calls are restricted in the Restrictions menu. 1. Slide the phone up, press the OK Key [MENU], then press 7. Recent Calls, 4. Blocked.2. Highlight an entry and do one of the following options: 2. Select More and then Blocked Calls. 3. Enter the 4-digit lock code. The default lock code is the last 4 digits of your phone number. 4. Select a call log to view details.ALLDisplays information about the most recently received, dialed and missed calls.1. Slide the phone up, press the OK Key [MENU], then press 7. Recent Calls, 5. All.2. Highlight an entry and select from the following options:• Press the OK Key [OPEN] to view the entry.• Press the Send Key to place a call to the number.• Press the Right Soft Key [Options] to select:Erase: Deletes the call from All call list.Lock/Unlock: Locks or unlocks the entry.Erase All: Deletes all entries from All call list.View Timers: Displays usage time.Blocked: Allows you to view blocked calls, if applicable. After the 270 received, dialed or missed calls, the oldest call will automatically be erased from the history. Shortcut: To view a quick list of all your calls, press the Send Key from idle mode.VIEW TIMERSChecks the usage time and manages your calls within the limit you set. To view 11 timers (Last Call, All Calls, Received Calls, Dialed Calls, Roaming Calls, Transmit Data, Received Data, Total Data, Last Reset, Lifetime Calls, Lifetime Data Counter):1. Slide the phone up, press the OK Key [MENU], then press 7. Recent Calls, 6. View Timers.2. Highlight a call list. Call timers include:Last Call / All Calls / Received Calls / Dialed Calls / Roaming Calls / Transmit Data / Received Data / Total Data / Last Reset / Lifetime Calls / Lifetime Data Counter• Press the Left Soft Key [Reset] to reset highlighted timer.• Press the Right Soft Key [Reset All] to reset all timers.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-32.png)
![62 63 01020305060704VOICE COMMANDSYour phone is equipped with an Advanced Voice Commands (AVC) feature. This feature allows you to make calls or use the phone’s functions by simply using your voice. All you have to do is talk into the phone and then the phone will recognize your voice and complete tasks by itself.1. To access Voice Commands from idle mode, slide the phone up, press the OK Key [MENU], then press Settings & Tools, 3. Tools, 1. Voice Commands. Shortcut: From idle mode, press AVC Key to access the Voice Commands menu.2. The phone displays the Voice Commands menu and prompts you to say the name of the command you want to use. To complete your task, simply follow the voice prompts. You can speak the name of the command after you hear a beep.3. Select one of the following options, then press the OK Key .Call <Name or #> / Send <MSG Type> / Go To <Menu> / Check <Item> / Contact <Name> / Search / Redial / Play <Playlist> / My Verizon / Help To view information about each option, press the Left Soft Key [Info]. Press the Right Soft Key [Settings] to access Voice Commands Settings. Please refer to page 64 for more details on Voice Commands Settings.4. When it recognizes one of these commands, the phone launches the associated application. If the phone does not hear a command within approximately eight seconds, AVC mode will turn itself o.CALL <NAME OR #>Use the Call command to voice dial a name from your Contact List or a phone number. When dialing a number, pronounce each digit, but do not pause noticeably between the digits.1. You will hear Please say a command and the Voice Commands menu will be displayed.2. If calling a contact from your Contact List, say Call <Name>. Your phone will ask you to conrm the name you said. Say “Yes“ if it was repeated correctly. That phone number will be dialed. If there is more than one number saved for that contact, you will be asked to conrm which number to dial.Example: Call John WorkSEND <MSG TYPE>Use the Send command to send a text or other type of message to a specied name or number.1. You will hear Please say a command and the Voice Commands menu will be displayed.2. Say “Send“ followed immediately by Text, Picture, Video or Voice Message.Example: Send text message to BobGO TO <MENU>Use the Go To command to open an application on your phone. You can say “Go To” by itself and be prompted to say the application name, or you can skip the prompt by saying ”Go To” followed by the application name.1. You will hear Please say a command and the Voice Commands menu will be displayed.2. To access a menu within the phone, say “Go To” followed by the menu.Example: “Go To Calendar”. If no menu option is stated, a list of options will be provided.CHECK <ITEM>The Check command lets you check status information for your phone. You can say “Check” or “Check Status” to see and hear all status information.1. You will hear Please say a command and the Voice Commands menu will be displayed.2. Say “Check” followed immediately by one of the following items:Status / Voicemail / Messages / Missed Calls / Time / Signal Strength / Battery Level / Volume / Balance / Minutes / Payment / My NumberTOOLS](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-33.png)
![64 65 01020305060704CONTACT <NAME>Use the Contact command to retrieve and display information for any name stored in your Contact List.1. You will hear Please say a command and the Voice Commands menu will be displayed.2. Say “Contact <Name>” to retrieve and display the contact information.Example: Contact Bob Smith and follow the voice prompts. Call / Readout / Create New / Modify / EraseSEARCHUse the Search command to search for information over the Internet.1. You will hear Please say a command and the Voice Commands menu will be displayed.2. Say “Search”.3. Your phone will make a web connection.REDIALUse the Redial command to make a call to the last number you dialed.1. You will hear Please say a command and the Voice Commands menu will be displayed.2. Say “Redial”.3. Your phone will make a call to the last number you dialed.PLAY <PLAYLIST>Say “Play” followed by a playlist title and then your phone will play back the recognized playlist for you.1. You will hear Please say a command and the Voice Commands menu will be displayed.2. Say “Play <Playlist>” to play back individual playlist or say “Play All Songs” to play back all songs saved in your phone.MY VERIZONUse the My Verizon command to access information about your Verizon account.1. You will hear Please say a command and the Voice Commands menu will be displayed.2. Say “My Verizon”.3. Your phone will make a web connection.HELPUse the Help command to view how to use the Voice Commands.1. You will hear Please say a command and the Voice Commands menu will be displayed.2. Say “Help”.3. The Help guide will be displayed on your phone.VOICE COMMANDS SETTINGSCONFIRM CHOICES When the phone does not recognize your voice command, it will ask you to repeat your voice command. If it does not recognize the name or number, it will display a list of up to three choices and speak each one in turn. You can control how often the phone asks you to conrm the recognized name or number.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 1. Voice Commands. To view information about each option, press the Left Soft Key [Info].2. Press the Right Soft Key [Settings] and then press 1. Conrm Choices. Shortcut: From idle mode, press AVC Key to access the Voice Commands menu and press the Right Soft Key [Settings].](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-34.png)
![66 67 010203050607043. Select Automatic, Always Conrm or Never Conrm, then press the OK Key .SENSITIVITYThe Sensitivity setting allows you to adjust the sensitivity monitoring of voice tones. If you frequently experience the messages “Please try again” or “COMMAND NOT RECOGNIZED Try again?”, adjust the sensitivity toward Less Sensitive. If you frequently experience false activations (when the phone recognizes a name you didn’t say), adjust the sensitivity toward More Sensitive.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 1. Voice Commands.2. Press the Right Soft Key [Settings] and then press 2. Sensitivity.3. Select More Sensitive, Automatic or Less Sensitive, then press the OK Key .ADAPT VOICEVoice Commands are speaker independent, which means that no training or adaptation is required. Some users with heavy accents or unusual voice characteristics may nd diculty in achieving high accuracy with speaker independent Voice Commands, so the Adapt Voice feature allows users to dramatically improve the recognition accuracy after adapting their voices. Users who get acceptable recognition accuracy will nd no additional benet to performing the Adapt Voice feature.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools,3. Tools, 1. Voice Commands.2. Press the Right Soft Key [Settings] and then press 3. Adapt Voice.3. Select 1. Train Voice then press the OK Key .• Train Voice: Requires that you make recordings of your voice to customize the voice recognition system. It will take a few minutes.4. “Adaptation will take a couple of minutes to complete. Adapt in a quiet room. Press OK to begin.” will appear on the screen. Press the OK Key . Wait for the beep, and then repeat the sentences using a normal tone of voice.5. When you are nished with a full session, you will reach a screen that reads “Adaptation Complete”.PROMPTSAllows you to select voice command system characteristics.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 1. Voice Commands.2. Press the Right Soft Key [Settings] and then press 4. Prompts.3. Select 1. Mode, 2. Audio playback or 3. Timeout, then press the OK Key .• Mode: Select the voice command system mode from the following:- Prompts: For handset to prompt for required information.- Readout+Alerts: For handset to prompt for required information and readout the contents of the screen and phone alerts.- Readout: For handset to prompt for required information and readout the contents of the screen.- Tones Only: For handset to provide beeps only for audio guidance.• Audio playback: Allows audio playback to play through the speakerphone or earpiece. Select Speakerphone or Earpiece.• Timeout: Select a period of time either 5 seconds or 10 seconds which the system listens for a command before timing out.4. Select an option and press the OK Key .ABOUT1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools,](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-35.png)
![68 69 010203050607043. Tools, 1. Voice Commands.2. Press the Right Soft Key [Settings] and then press 5. About.3. The Nuance version appears.4. To return to the previous screen, press the CLR Key or the Right Soft Key [Back].CALCULATORThe Calculator allows you to perform simple mathematical calculations. To access thecalculator:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 2. Calculator.2. Follow the instructions below to calculate 8×6÷4-2.5=9.5• Input 8 and then press the Directional Key right.• Input 6 and then press the Directional Key left.• Input 4 and then press the Directional Key down.• Input 2 and then press the to input (.).• Input 5 and then press the OK Key and you will see the answer (9.5).3. To reset, press the Left Soft Key [Clear]. • Directional Key right : X • Directional Key down : - • Directional Key left : ÷ • Directional Key up : + • * Key : . • Left Soft Key : Clear • OK Key : = • To change the displayed number from positive (+) to negative (-) and vice versa, press # Key .• Press the Right Soft Key [Operator] to use parenthesis 1. (, 2. ) and 3. Exponent.TIP CALCULATORAllows you to calculate the tip and determine how much each person should pay for the bill.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 3. Tip Calculator.2. Input the amount in the Total Bill eld and press the Directional Key down.3. Select the percentage of tip in the Tip (%) eld by pressing the Directional Key up or down. The amount of a tip will be displayed in the Tip ($) eld. Press the Directional Key right.4. Input the number of persons by pressing the Directional Key up or down. The tip amount and cost per person is shown.5. Press the Left Soft Key [Reset] to clear the elds. Press the Right Soft Key [Close] to return to the previous menu. Total bill, Tip(%) and Split, where directly are entered the values by the number keys each eld.CALENDARThe Calendar tool provides easy and convenient access to your schedule. Simply store your appointments and your phone will alert you.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 4. Calendar.2. Highlight the scheduled day.3. Press the Left Soft Key [New].4. The Subject eld is highlighted. Enter the name of the event using the QWERTY Keypad. Press the Directional Key down to set the other elds for the event:• Subject: Entera subject of the schedule.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-36.png)
![70 71 01020305060704• Start Time: Press the Right Soft Key [Set] and set a start time.• End Time: Press the Right Soft Key [Set] and set a end time.• Start Date: Press the Right Soft Key [Set] and set a start date.• End Date: Press the Right Soft Key [Set] and set a end date.• Recurrence: Press the Right Soft Key [Set] and select the recurrence of the event from the following: None / Daily / Every X Days / Weekly / Monthly / Yearly• Alert Time: Press the Right Soft Key [Set] and select the alert time before the event takes place from the following: On time / 5 minutes before / 10 minutes before / 15 minutes before /30 minutes before / 1 hour before / 3 hours before / 5 hours before /1 Day Before• Reminder: Press the Right Soft Key [Set] and select a reminder before the event from the following: O / Once / Every 2 minutes / Every 15 minutes• Alert Zone: Press the Right Soft Key [Set] to select a new ringtone. Highlight a desired ringtone then press the OK Key . Press the Left Soft Key [Play] to play a ringtone.• Vibrate: Press the Right Soft Key [Set] and select On or O.• Event type: Press the Right Soft Key [Set] and select a event type from the following:Event / Important / Meal / Game/Practice/Exercise / Vacation / Holiday / Birthday / Anniversary / Business / Social / Medical / Dental / School / Concert/Performance / Play Date / Picnic / Outing / Personal / Phone Call / Must Attend / Travel Required / Needs Preparation / Woman / Man / Girl / Boy / Family• Attachment: Press the Left Soft Key [Add] and select My Picture or My Video to attach.• Location: Enter the information of location.• Note: Enter memo of the schedule.5. Press the OK Key [SAVE] to save it. The date of the event will be marked on your calendar.VIEW SAVED EVENT1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 4. Calendar.2. Choose the event then press the OK Key [VIEW]ERASE SAVED EVENT1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 4. Calendar.2. Choose the event then press the OK Key [VIEW].3. Press the Left Soft Key [Erase], select Yes, then press the OK Key .ERASE ALL PAST EVENTSAllows you to delete past events from today.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 4. Calendar.2. Choose the event then press the OK Key [VIEW].3. Press the Right Soft Key [Options], select Erase All Old and press the OK Key .4. Select Yes, then press the OK Key .E-DIARYE-Diary is a simple diary application designed to be easy to understand and convenient for everyday use.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 5. E-Diary.2. Press the Left Soft Key [New].3. In the Weather & Feeling eld, press the Left Soft Key [Set], then select an icon and press the OK Key .4. Press the Directional Key down to set the other elds for the E-diary:TITLE](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-37.png)
![72 73 01020305060704Enter the title of the diary.PICTUREPress the Left Soft Key [Set] to select an image stored in My Pictures and press the OK Key . Please refer to page 114 for more details on MY PICTURES.TEXTEnter the message for the diary.BACKGROUNDPress the Directional Key left or right to select one of the following backgrounds:Blackboard / Essay / Sky / Letter5. In each eld, press the Right Soft Key [Options] then press 1. Preview to preview the setting you selected or 2. Cancel E-Diary to discard your new E-diary.6. Press the OK Key [SAVE] to save your E-diary.SEND AN EDIARY1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 5. E-Diary.2. Press the Directional Key up or down to highlight an entry, then press the Right Soft Key [Options].3. Select Send and press the OK Key , then compose a Picture Message and press the OK Key [SEND]. Please refer to page 121 for more details on Picture Message.EDIT AN EDIARY1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 5. E-Diary.2. Highlight an E-diary, then press the Right Soft Key [Options].3. Select Edit and press the OK Key then modify the E-diary.4. Press the OK Key [SAVE] to save your modications.ERASE EDIARY1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 5. E-Diary.2. Highlight an E-diary, then press the Right Soft Key [Options].3. Select Erase to erase an E-diary or Erase all to erase all the E-diary entries, then press the OK Key .4. Select Yes and press the OK Key .ALARM CLOCKThe Alarm Clock tool allows you to set up to three alarms. When you set an alarm, the current time is displayed on the top of the home screen. When the alarm goes o alarm will be displayed on the LCD screen and the alarm will sound.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 6. Alarm Clock. Shortcut: From idle mode, press the Directional Key right to access MY SHORTCUTS and then press 4. Alarm Clock.2. Highlight an Alarm (1, 2 or 3), then press the OK Key .3. Press the Directional Key down to set the elds for the alarm:ON/OFFPress the Directional Key left or right to select On or O.TIMEUse the keypad to set a time for the alarm and highlight am or pm, then press the Left Soft Key to set am or pm.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-38.png)
![74 75 01020305060704FREQUENCYPress the Directional Key left or right to select a setting from the following:Once / Daily / Weekdays / WeekendsRINGTONEPress the Left Soft Key [Set] then select the alert tone you wish to set. Press the Left Soft Key [Play] to play a ringtone. Press the OK Key [SET] to make your selection.4. Press the OK Key [SAVE] to set the alarm.TURN ON/OFF THE ALARM SETTING1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 6. Alarm Clock.2. Highlight an Alarm (1, 2 or 3), then press the Right Soft Key [Options].3. Select Turn On or Turn O then press the OK Key .RESET THE ALARM SETTING1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 6. Alarm Clock.2. Highlight an Alarm (1, 2 or 3), then press the Right Soft Key [Options].3. Select Reset Alarm, then press the OK Key .4. “RESET ALARM (1, 2 or 3)?” will appear on the screen. Select Yes and press the OK Key .RESET ALL ALARM SETTINGS1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 6. Alarm Clock.2. Highlight an Alarm (1, 2 or 3), then press the Right Soft Key [Options].3. Select Reset All, then press the OK Key .4. “RESET ALL ALARMS?” will appear on the screen. Select Yes and press the OK Key . TURN ON/OFF THE ALARM SETTING, RESET THE ALARM SETTING and RESET ALL ALARM SETTINGS are available on the set alarms.STOP WATCHSimultaneously times up to eight dierent events. To operate the stop watch:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 7. Stop Watch.2. To start the stop watch, press the OK Key [Start].3. To pause it, press the OK Key [Stop].4. To resume it, press the OK Key [Start].5. To reset it, press the Right Soft Key [Reset].TO TIME UP TO EIGHT EVENTS AT ONCE1. To start the stop watch, press the OK Key [Start].2. To stop a time period and continue measuring another one, press the Left Soft Key [Lap].3. To stop the second and continue measuring a third one, press the Left Soft Key [Lap].4. To measure up to eight time periods, repeat the above steps.5. To stop the stop watch, press the OK Key [Stop].6. To reset it, press the Right Soft Key [Reset], then press the CLR Key to nish using the stop watch and return to the previous menu.WORLD CLOCKTo display the time and date in pre-programmed cities:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools,3. Tools, 8. World Clock.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-39.png)
![76 77 010203050607042. Press the Direction Key left or right to select the desired city on the world map.3. Or press the Left Soft Key [Cities] to access the CITIES LIST. Press the Direction Key up or down to select the desired city, then press the OK Key . 4. The world map appears with the city, its date and time.5. Press the Right Soft Key [Exit] to return to the previous menu.DAYLIGHT SAVING TIME DST SETTING1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 8. World Clock.2. With the desired continent selected, press the OK Key .3. Press the Right Soft Key [DST] to set Daylight Saving Time, the DST icon appears.4. To turn o DST, press the Right Soft Key [DST] again. The DST option will adjust clocks forward one hour.5. Press the OK Key , then press the Right Soft Key [Exit] to return to the previous menu.NOTEPAD +Your phone includes an internal notepad that can be used to compose and store reminders and notes. To create a note:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 9. Notepad +. Shortcut: Slide the phone up and press the Notepad + Key .2. Press the Left Soft Key [New] to enter a new note.3. To create a note with a picture, video or sound, press the Right Soft Key [Options], press 1. Add, select 1. Picture or 2. Sound, then press the OK Key . Select your desired picture, video or sound and press the OK Key .4. To save the note, press the Right Soft Key [Options], then press 2. Save. VIEW SAVED MEMOTo view a saved memo:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 9. Notepad +.2. Select a note, then press the OK Key [VIEW].SEND SAVED MEMOTo send a saved memo:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 9. Notepad +.2. Select a note, press the Right Soft Key [Options], then press 2. Send.3. Select TXT Message, Picture Message, Video Message or Voice Message, then press the OK Key . If a note has a picture, video or voice attachment, the corresponding message window will be opened automatically.4. Compose the message, then press the OK Key [SEND].ERASE SAVED MEMOTo erase a saved memo:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 9. Notepad +.2. Select a note, press the Right Soft Key [Options] then select 3. Erase and press the OK Key .3. Select Yes and press the OK Key .ERASE ALL SAVED MEMOSTo erase all saved memos:](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-40.png)
![78 79 010203050607041. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 9. Notepad +.2. Press the Right Soft Key [Options], then select 4. Erase All and press the OK Key .3. Select Yes and press the OK Key .USB MASS STORAGEUSB Mass Storage allows you to transfer les to or from your PC. In order to use thisoption, you must insert a microSD memory card (sold separately) and connect your device to a PC with the USB cable.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 3. Tools, 10. USB Mass Storage.MY VERIZONTo access your Verizon account information:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 1. My Verizon. Shortcut: From idle mode, press the OK Key to unlock the keypad, then press the Directional Key right and press 1. My Verizon. MASTER VOLUME1. From idle mode, press the OK Key to unlock the keypad, then press the Volume Keys / up or down. 2. Select one of the following options and press the OK Key [SET] to save it.• All Sounds O• Alarm Only• Vibrate Only• Low / Medium Low / Medium / Medium High / High • Press the Volume Keys / up or down to adjust Earpiece volume during a call.BLUETOOTHBluetooth® technology connectivity enables wireless connections between electronic devices. If connected with a Bluetooth handsfree device, you can use your phone more freely. Since devices with Bluetooth connectivity communicate using radio waves, your phone and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (30 feet) of each other. The connection can be subject to interference from obstructions such as walls or other electronic devices. This device is compliant with Bluetooth specication 3.0, supporting the following proles: Headset, Handsfree, Stereo, Phonebook Access, Object Push for vCard and Get Files. To ensure interoperability between other devices supporting Bluetooth technology, use approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this phone. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or Verizon Wireless. If you want more information on this function, visit the Bluetooth Technology organization Web site: https://www.bluetooth.org/. Important: Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce battery life.BLUETOOTH ON/OFFTo toggle Bluetooth power On/O:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 4. Bluetooth.2. Press the Left Soft Key [Turn On/Turn O]. A conrmation window appears.ADD NEW DEVICEPairing is the process that allows the handset to locate, establish and register a 1-to-1connection with the target device.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & SETTINGS](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-41.png)
![80 81 01020305060704Tools, 4. Bluetooth, 1. Add New Device.2. If the Bluetooth® power is switched o, the following message will appear on the LCD screen “BLUETOOTH POWER ON”.3. The handset will prompt you with the following message on the LCD screen: “PLACE DEVICE YOU ARE CONNECTING TO IN DISCOVERABLE MODE.” Press the OK Key .4. The device will appear in the ADD NEW DEVICE menu. Select the device you wish to pair to, then press the OK Key [PAIR].5. The handset may prompt you for the passkey. Consult the Bluetooth accessory (sold separately) instructions for the appropriate passkey (typically “0000”—4 zeroes). Enter the passkey, then press the OK Key . You do not need to input the passkey for pairing when the passkey of the Bluetooth headset or hands-free kit is 0000.6. The handset will prompt you with the following message on the LCD screen: Before Connecting To [Device Name]. If you would like to always conrm before connecting to the Bluetooth device, select Always Ask, then press the OK Key . Then the handset will prompt you with the message “Connect To [Device Name]?”. Select Yes and press the OK Key . If you do not wish to conrm every time before connecting to the Bluetooth device, select Always Connect, then press the OK Key .7. Once connected, you will see the device listed in the Bluetooth menu and the Bluetooth device connected icon will appear at the top of the screen when connected to the Bluetooth device. • In the Bluetooth menu, you can turn o the device by pressing the Left Soft Key [Turn O]. Conversely, you can turn on by pressing the Left Soft Key [Turn On].• If multiple devices are displayed, select the device you want to connect to.OPTIONS1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 4. Bluetooth.2. Select the paired device.3. Press the Right Soft Key [Options].4. Select one of the following options, then press the OK Key .• Remove Device: Removes a device from the pairing list.• Rename Device: Renames a paired device.• Incoming Security: Sets permissions for connecting an incoming device.• Service Discovery: Searches for the services that the selected device supports.• Device Info: Displays device information.5. Or, press the OK Key to access 1. Send Name Card, 2. Get Name Card, 3. Send Picture, 4. Send Video or 5. Browse/Get Files. Select the desired option and press the OK Key to access the following:• Disconnect: Disconnects the connected device.• Send Name Card: Allows you to send name cards stored in Contacts to a selected device.1. Press the Directional Key up or down to highlight a desired contact or contacts, then press the OK Key [MARK]. If you want to change your selections, press the OK Key [UNMARK] to deselect your selections.2. Press the Left Soft Key [Done]. If you want to send all the name cards, press the Right Soft Key [Send All].• Get Name Card: Get name cards from the selected device.• Send Picture: Allows you to send photos to a selected device.1. Press the Directional Key up, down, left or right to highlight a desired photo or photos, then press the OK Key [MARK]. If you want to change your selections, press the OK Key [UNMARK] to deselect your selections.2. Press the Left Soft Key [Done]. If you want to send all the photos, press the Right Soft Key [Send All].• Send Video: Allows you to send videos to a selected device.1. Press the Directional Key up, down, left or right to highlight a desired video or videos, then press the OK Key [MARK]. If you want to change your selections, press the OK Key [UNMARK] to deselect your selections.2. Press the Left Soft Key [Done]. If you want to send all the videos, press the Right Soft Key [Send All].• Browse/Get Files: Allows you to get les from the selected device.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-42.png)
![82 83 01020305060704SETTINGSMY PHONE NAMETo edit the Bluetooth® name of your phone: 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 4. Bluetooth.2. Press the Right Soft Key [Options].3. Press 1. My Phone Name.4. Use the QWERTY Keypad to enter a new custom name.5. Press the OK Key [SET] to save and exit.DISCOVERY MODETo set whether your device is able to be searched for by other Bluetooth devices in the area:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 4. Bluetooth.2. Press the Right Soft Key [Options].3. Press 2. Discovery Mode. If Bluetooth power is not on, it will be turned on automatically.4. Select On or O, then press the OK Key [SET].SUPPORTED PROFILESTo view brief descriptions of the proles supported by the phone:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 4. Bluetooth.2. Press the Right Soft Key [Options].3. Press 3. Supported Proles.4. Select one of the following proles, then press the OK Key [VIEW].Headset / Handsfree / Stereo / Phonebook Access / Basic Imaging / Basic Printing / Object Push / Browse/Get Files / SyncAUTO PAIR HANDSFREETo set Auto Pair Handsfree On/O:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 4. Bluetooth.2. Press the Right Soft Key [Options].3. Press 4. Auto Pair Handsfree.4. Select On or O, then press the OK Key [SET].SOUNDS SETTINGSEASY SET UPThe Easy Set up menu allows you to set ve stages for Sounds Settings with simple operation.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 1. Easy Set up.• CALL SOUNDS: Select Ring Only, Vibrate Only, Ring and Vibrate or Be Silent then press the OK Key [SET] to save the setting or press the Right Soft Key [Skip] to go to the next setting.• KEYPAD VOLUME: Adjust the volume by pressing the Directional Key up or down, then press the OK Key [SET] to save the setting. Press the Left Soft Key [Play] to test the volume level or press the Right Soft Key [Skip] to go to the next setting.• TEXT MESSAGE ALERT: Select Ring Only, Vibrate Only, Ring and Vibrate or Be Silent then press the OK Key [SET] to save the setting or press the Right Soft Key [Skip] to go to the next setting.• MULTIMEDIA MSG ALERT: Select Ring Only, Vibrate Only, Ring and Vibrate or Be Silent then press the OK Key [SET] to save the setting or press the Right Soft Key [Skip] to go to the next setting.• VOICEMAIL MSG ALERT: Select Ring Only, Vibrate Only, Ring and Vibrate or Be Silent then press the OK Key [SET] to save the setting or press the Right Soft Key [Skip] to complete set up.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-43.png)
![84 85 01020305060704CALL SOUNDSTo set ringtones for types of incoming calls:CALL RINGTONE1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 2. Call Sounds, 1. Call Ringtone.2. Press the Directional Key up or down to select a ringtone, then press the OK Key [SET]. To play the ringtone, press the Left Soft Key [Play].CALL VIBRATE1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 2. Call Sounds, 2. Call Vibrate.2. Select On or O, then press the OK Key [SET].CALLER ID READOUT1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 2. Call Sounds, 3. Caller ID Readout.2. Select Ring Only, Caller ID + Ring or Name Repeat, then press the OK Key [SET].ALERT SOUNDSTo select the alert type for a new message:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 3. Alert Sounds.2. Select 1. TXT Message, 2. Multimedia Message or 3. Voicemail, then press the OK Key .3. Select Tone, Vibrate or Reminder, then press the OK Key .• Tone: Press the Directional Key up or down to select a ringer, then press the OK Key [SET]. To play the alert tone, press the Left Soft Key [Play].• Vibrate: Press the Directional Key up or down to select On or O, then press the OK Key [SET].• Reminder: Press the Directional Key up or down to select Once, Every 2 Minutes, Every 15 Minute or O, then press the OK Key [SET].EMERGENCY TONE1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 3. Alert Sounds, 4. Emergency Tone.2. Select Alert, Vibrate or O, then press the OK Key [SET].3. To view the help for Emergency Tone, press the Left Soft Key [Help].MISSED CALL1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools,5. Sounds Settings, 3. Alert Sounds, 5. Missed Call.2. Select Tone, Vibrate or Reminder, then press the OK Key .• Tone: Press the Directional Key up or down to select a ringer, then press the OK Key [SET]. To play the alert tone, press the Left Soft Key [Play].• Vibrate: Press the Directional Key up or down to select On or O, then press the OK Key [SET].• Reminder: Press the Directional key up or down to select Once, Every 2 Minutes, Every 15 Minute or O, then press the OK Key [SET].KEYPAD SOUNDSTo select keypad sounds when using the QWERTY Keypad.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 4. Keypad Sounds.2. Select DTMF, Cloud or Simple, then press the OK Key [SET]. DTMF is the default setting for this device.KEYPAD VOLUMETo set the keypad volume:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 5. Keypad Volume.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-44.png)
![86 87 010203050607042. Adjust the volume by pressing the Directional Key up or down, then press the OK Key [SET] to save the setting. To test the volume level, press the Left Soft Key [Play].DIGIT DIAL READOUTThe Digit Dial Readout setting controls if digits are read out loud when you enter a phone number with the QWERTY Keypad.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 6. Digit Dial Readout.2. Select On or O, then press the OK Key [SET].SERVICE ALERTSTo set any of the three Alert options to either On or O:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 7. Service Alerts.2. Select one of the following options, then press the OK Key .• ERI: The Enhanced Roaming Indicator (ERI) feature displays a text banner on the display screen informing the handset user of which systems the wireless device is using as compared to the service plan they purchased. The ERI Banner text changes to tell a customer if they are using the Verizon Wireless Network, Extended Network or Roaming.• Minute Beep: Alerts you every minute during a call.• Call Connect: Alerts you when the call is connected.• Software Update: Alerts you when a software update is available.3. Select On or O, then press the OK Key [SET].DEVICE CONNECTAllows you to turn the Device Connect On or O:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 8. Device Connect.2. Select On or O, then press the OK Key [SET].POWER ON/OFFTo set the phone to sound a tone when the phone is powered on or o:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 9. Power On/O.2. Press 1. Power On or 2. Power O.3. Select On or O, then press the OK Key [SET].OPEN/CLOSE SOUNDTo set the phone to sound a tone when the slider is open or closed:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 5. Sounds Settings, 10. Open/Close Sounds.2. Select Music, Simple, Beep or O, then press the OK Key [SET].DISPLAY SETTINGSAllows you to customize the display.EASY SET UPEasy Set up menu allows you to set nine stages for Display Settings with simple operation.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 6. Display Settings, 1. Easy Set up.• PERSONAL BANNER: Enter the banner text (up to 16 characters) to be displayed on the main screen, then press the OK Key [SET] or press the Right Soft Key [Skip] to go to the next setting.• DISPLAY BACKLIGHT: Select 7 Seconds, 15 Seconds, 30 Seconds or Always On, then press the OK Key [SET] or press the Right Soft Key [Skip] to go to the next setting.• KEYPAD BACKLIGHT: Select 7 Seconds, 15 Seconds, 30 Seconds or Always On, then press the OK Key [SET] or press the Right Soft Key [Skip] to go to the next setting.• WALLPAPER: Select a desired screen, then press the OK Key [SET]. Press the Left Soft](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-45.png)
![88 89 01020305060704Key [View] to view the image, or press the Right Soft Key [Skip] to go to the next setting.• DISPLAY THEMES: Select White, Knight or Green Nomad, then press the OK Key [SET]. Press the Left Soft Key [Preview] to preview the selected display theme, or press the Right Soft Key [Skip] to go to the next setting.• MENU LAYOUT: Select Tab, List or Grid, then press the OK Key [SET]. Press the Left Soft Key [Preview] to preview the selected main menu layout, or press the Right Soft Key [Skip] to go to the next setting.• FONT TYPE: Select VZW Font, Sleek Modern Font or Dandy Round Font, then press OK Key [SET]. Press the Left Soft Key [Preview] to preview the selected font type, or press the Right Soft Key [Skip] to go to the next setting.• DIAL FONT: Select Normal or Large Only, then press OK Key [SET]. Press the Left Soft Key [Preview] to preview the selected dial fonts, or press the Right Soft Key [Skip] to go to the next setting.• CLOCK FORMAT: Select Analog, Large Analog, Dual Analog, Digital 12, Large Digital 12, Digital 24, Large Digital 24 , Dual Digital then press the OK Key [SET]. Press the Left Soft Key [Preview] to preview the selected clock format, or press the Right Soft Key [Skip] to complete set up. This guide gives navigation instructions according to the defaults, Menu Layout is set to List, and Display Themes is set to Oceanic Delight. If other settings are set, navigating the phone’s menus may be dierent.BANNERTo set your Personal or ERI banner:PERSONAL BANNERThe Personal Banner can be up to 16 characters and is displayed on your phone’s display screen from idle mode. 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 6. Display Settings, 2. Banner, 1. Personal Banner.2. Enter the banner text (up to 16 characters) and press the Directional Key down to select a desired font color.3. Press the Directional Key left or right to select the desired font color and press the OK Key [SET] to save the banner.ERI BANNERIf you use ERI Service, ERI Text is shown on the sub banner. 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 6. Display Settings, 2. Banner, 2. ERI Banner.2. Select On or O, then press the OK Key [SET].BACKLIGHTTo set the duration for backlight illumination of the Main Screen and Keypad:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 6. Display Settings, 3. Backlight.2. Press 1. Display or 2. Keypad.3. Select 7 Seconds, 15 Seconds or 30 Seconds then press the OK Key [SET].WALLPAPERTo choose the kind of background to be displayed on the phone:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 6. Display Settings, 4. Wallpaper.2. Select a desired screen, then press the OK Key [SET]. To view the image, press the Left Soft Key [View].DISPLAY THEMESTo choose the background screen:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 6. Display Settings, 5. Display Themes.2. Select White, Knight or Green Nomad, then press the OK Key [SET]. To preview the selected display theme, press the Left Soft Key [Preview].3. To view the help option for Display Theme, press the Right Soft Key [Help]. White is the default setting for this device.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-46.png)
![90 91 01020305060704MAIN MENU SETTINGSTo change Main Menu layout and type:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 6. Display Settings, 6. Main Menu Settings.• Menu Layout: Allows you to change Main Menu type. 1. Select Tab, List or Grid, then press the OK Key [SET]. 2. To preview the selected main menu layout, press the Left Soft Key [Preview]. list is the default setting for this device.• Replace Menu Items: Set Menu Items in Main Menu.• Position Menu Items: Set Items Positions in Main Menu.• Reset Menu Settings: Reset Menu Settings to the initial Menu Settings.1. Menu Layout: Reset Menu Layout to the initial Menu Layout.2. Menu Items: Reset Menu Items to the initial Menu Items.3. Item Positions: Reset Item Positions to the initial Item Positions.4. All: Reset Main Menu Settings to the initial Main Menu Settings. FONT TYPETo set the font type:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 6. Display Settings, 7. Font Type.2. Select VZW Font, Sleek Modern Font or Dandy Round Font, then press the OK Key [SET]. To preview the selected font type, press the Left Soft Key [Preview].DIAL FONTSTo set the font size and eects:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 6. Display Settings, 8. Dial Fonts.2. Press the Directional Key left or right to select Normal or Large Only for Dial Font Size, then press the Directional Key down.3. Press the Left Soft Key [Preview] to preview the selected dial fonts.MENU FONT SIZETo set the menu font size:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 6. Display Settings, 9. Menu Font Size.2. Select Normal or Large, then press the OK Key [SET].CLOCK FORMATTo choose the kind of clock to be displayed on the LCD screen:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 6. Display Settings, 10. Clock Format.2. Press the Directional Key left or right to select Analog, Large Analog, Dual Analog, Digital 12, Large Digital 12, Digital 24, Large Digital 24 , Dual Digital or O, then press the Directional Key down.3. Press the Directional Key left or right to select the font color and then press the OK Key [SET].4. Press the Left Soft Key [Preview] to preview the selected clock format, or press the Right Soft Key [Help] to view the help for Clock Format. Large Digital 12 is the default setting for this device.PHONE SETTINGSAIRPLANE MODEIn Airplane Mode, all menu functions can be accessed except making calls, receiving calls, data connection and Bluetooth®. Activating Airplane Mode will disable all wireless communications. Services that support Location On functions are temporarily disabled.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 1. Airplane Mode.2. Select On or O, then press the OK Key [SET].](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-47.png)
![92 93 01020305060704SET SHORTCUTSYour phone oers you the option of assigning a shortcut key (Directional Key left, right, up, and down) to a favorite or often-used function.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 2. Set Shortcuts, 1. Set My Shortcuts.2. Select Shortcut 1, Shortcut 2, Shortcut 3 or Shortcut 4, then press the OK Key [SET].3. Select the desired option, then press the OK Key [SET]. From idle mode, pressing the OK Key to unlock the keypad and pressing the Directional Key right will display the MY SHORTCUTS screen. On the MY SHORTCUTS screen, select a menu, then press the OK Key to access the menu. Also, you can relocate a menu by pressing the Right Soft Key [Move], pressing the Directional Key up or down, and then pressing the OK Key [SAVE]. Or you can press the Left Soft Key [Settings] to access the Set My Shortcuts or Set Directional Keys menus.RESET MY SHORTCUTSTo reset My Shortcuts to their original defaults: 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 2. Set Shortcuts, 1. Set My Shortcuts.2. Select Shortcut 1, Shortcut 2, Shortcut 3 or Shortcut 4, then press the Right Soft Key [Options].3. Press 1. Reset Shortcut (1, 2, 3 or 4) or 2. Reset My Shortcuts.4. Select Yes and press the OK Key .SET DIRECTIONAL KEYSFrom idle mode, you can specify the function that is accessed when you press the Directional Key up, down, left or right. 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 2. Set Shortcuts, 2. Set Directional Keys.2. Select UP Directional Key, LEFT Directional Key or DOWN Directional Key.3. Select the desired option, then press the OK Key [SET].RESET DIRECTIONAL KEY SETTINGSUse the following procedure to specify the default Directional Key settings.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 2. Set Shortcuts, 2. Set Directional Keys.2. Select UP Directional Key, LEFT Directional Key or DOWN Directional Key, LEFT Directional Key, DOWN Directional Key or RIGHT Directional Key, then press the Right Soft Key [Options].3. Press 1. Reset (UP, LEFT or DOWN) Key or 2. Reset Directional Keys. The RIGHT Directional Key appears in the list, but you can only press the Left Soft Key [Disable] or press the Right Soft Key [Options] and press 1. Reset Directional Keys.4. Select Yes and press the OK Key .VOICE COMMANDS SETTINGSCONFIRM CHOICES When the phone does not recognize your voice command, it will ask you to repeat your voice command. If it does not recognize the name or number, it will display a list of up to three choices and speak each one in turn. You can control how often the phone asks you to conrm the recognized name or number.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 3.Voice Commands Settings. To view information about each option, press the Left Soft Key [Info].2. Press the Right Soft Key [Settings] and then press 1. Conrm Choices. Shortcut: From idle mode, press AVC Key to access the Voice Commands menu and press the Right Soft Key [Settings].3. Select Automatic, Always Conrm or Never Conrm, then press the OK Key .](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-48.png)
![94 95 01020305060704SENSITIVITYThe Sensitivity setting allows you to adjust the sensitivity monitoring of voice tones. If you frequently experience the messages “Please try again” or “COMMAND NOT RECOGNIZED Try again?”, adjust the sensitivity toward Less Sensitive. If you frequently experience false activations (when the phone recognizes a name you didn’t say), adjust the sensitivity toward More Sensitive.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 3.Voice Commands Settings.2. Press the Right Soft Key [Settings] and then press 2. Sensitivity.3. Select More Sensitive, Automatic or Less Sensitive, then press the OK Key .ADAPT VOICEVoice Commands are speaker independent, which means that no training or adaptation is required. Some users with heavy accents or unusual voice characteristics may nd diculty in achieving high accuracy with speaker independent Voice Commands, so the Adapt Voice feature allows users to dramatically improve the recognition accuracy after adapting their voices. Users who get acceptable recognition accuracy will nd no additional benet to performing the Adapt Voice feature.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 3.Voice Commands Settings.2. Press the Right Soft Key [Settings] and then press 3. Adapt Voice.3. Select 1. Train Voice then press the OK Key .• Train Voice: Requires that you make recordings of your voice to customize the voice recognition system. It will take a few minutes.4. “Adaptation will take a couple of minutes to complete. Adapt in a quiet room. Press OK to begin.” will appear on the screen. Press the OK Key . Wait for the beep, and then repeat the sentences using a normal tone of voice.5. When you are nished with a full session, you will reach a screen that reads “Adaptation Complete”.PROMPTSAllows you to select voice command system characteristics.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 3.Voice Commands Settings.2. Press the Right Soft Key [Settings] and then press 4. Prompts.3. Select 1. Mode, 2. Audio playback or 3. Timeout, then press the OK Key .• Mode: Select the voice command system mode from the following:- Prompts: For handset to prompt for required information.- Readout+Alerts: For handset to prompt for required information and readout the contents of the screen and phone alerts.- Readout: For handset to prompt for required information and readout the contents of the screen.- Tones Only: For handset to provide beeps only for audio guidance.• Audio playback: Allows audio playback to play through the speakerphone or earpiece. Select Speakerphone or Earpiece.• Timeout: Select a period of time either 5 seconds or 10 seconds which the system listens for a command before timing out.4. Select an option and press the OK Key .ABOUT1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 3.Voice Commands Settings.2. Press the Right Soft Key [Settings] and then press 5. About.3. The Nuance version appears.4. To return to the previous screen, press the CLR Key or Right Soft Key [Back].](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-49.png)
![96 97 01020305060704LANGUAGETo set the bilingual feature to either English or Español:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 4. Language.2. Select either English or Español, then press the OK Key [SET].TIME & DATESETTING THE TIME & DATE1. Slide the phone up, press the OK KEY [MENU], then press 9. Settings & Tools, 7. Phone Settings, 5. Time & Date.2. Press the Directional Key up, down or right and input Date, TIME, DST and CURRENT TIME ZONE.3. Press the OK Key [SAVE] to save and exit.LOCATION1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 6. Location.2. Select one of the following settings, then press the OK Key [SET].• On: Your location is now available to the network.• E911 Only: Your location will be hidden from the network and applications, except for 911. When Lock Setting is set for Location Setting under Restrictions on the Security menu, you will need to enter a lock code. The default lock code is the last 4 digits of your phone number.CURRENT COUNTRYAllows you to set the country of your current location so that your phone works properly while you travel.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 7. Current Country.2. Press the Directional Key up or down or input the country name in the Go To eld to select the desired country, then press the OK Key [SET]. To view the help option for Current Country, press the Right Soft Key [Help].PHONE SECURITYThe Security menu allows you to electronically secure the phone. The default lock code is the last 4 digits of your phone number.EDIT CODESTo set a new lock code: 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 8. Phone Security.2. Enter the four-digit lock code.3. Press 1. Edit Codes.4. Select one of the following settings, then press the OK Key .• Phone Only: Allows you to edit the lock code for Security. (The default lock code is the last 4 digits of your phone number.)• Calls & Services: Allows you to edit the lock code for Restrictions. (The default lock code is the last 4 digits of your phone number.)5. If Phone Only is selected, enter the new four-digit code in the Enter New Code eld. Enter the new four-digit code again in the Re-enter New Code eld to conrm your input, then press the OK Key [SET].6. If Calls & Services is selected, enter the current lock code in the Enter Current Code eld. Enter the new four-digit code in the Enter New Code eld. Enter the new four-digit code again in the Re-enter New Code eld, then press the OK Key [SET].RESTRICTIONSUse the following procedure to congure Location Setting, Calls and Messages restrictions. 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 8. Phone Security.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-50.png)
![98 99 010203050607042. Enter the four-digit lock code. The default lock code is the last 4 digits of your phone number.3. Press 2. Restrictions.4. Enter the four-digit lock code again.5. Select one of the following settings:• Location Setting: Unlock Setting/Lock Setting.• Calls: Incoming Calls/Outgoing Calls.For Incoming Calls, set Allow All, Contacts Only or Block All.For Outgoing Calls, set Allow All, Contacts Only or Block All.• Messages: Incoming Messages/Outgoing Messages.For Incoming Messages, set Allow All or Block All.For Outgoing Messages, set Allow All or Block All.6. Press the OK Key [SET]. In emergency mode, the settings of Restrictions dose not apply.PHONE LOCK SETTINGThis setting species whether the phone should be locked whenever it is turned on. Lock Mode prevents the unauthorized use of your phone. Once the phone is locked, it is in restricted mode until the lock code is entered. You can still make emergency calls. 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 8. Phone Security.2. Enter the four-digit lock code. The default lock code is the last 4 digits of your phone number.3. Press 3. Phone Lock Setting.4. Select one of the following settings, then press the OK Key [SET].• Unlocked: Phone is unlocked.• On Power Up: Phone will lock when it is turned on.LOCK PHONE NOWLock the phone now. 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 8. Phone Security.2. Enter the four-digit lock code. The default lock code is the last 4 digits of your phone number.3. Press 4. Lock Phone Now.4. To unlock the phone from idle mode, slide the phone up, then press the Right Soft Key [Unlock] and enter the four-digit lock code.RESTORE PHONETo delete all User Data and restore all settings to their initial defaults: 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 8. Phone Security.2. Enter the four-digit lock code.3. Press 5. Restore Phone.4. A conrmation message appears in the display, select Yes, and then press the OK Key .5. After reading the message that appears, press the OK Key .6. Enter the four-digit lock code. The phone will turn o and then back on again automatically.SIM SECURITYThe Security menu allows you to electronically secure the SIM. The default lock code is the last 4 digits of your phone number.PIN CODETo lock PIN code:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings &](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-51.png)
![100 101 01020305060704Tools, 7. Phone Settings, 9. SIM Security.2. Enter the four-digit lock code. The default lock code is the last 4 digits of your phone number.3. Press 1. PIN Code, 1. PIN.4. Select one of the following settings, then press the OK Key [SET].• Unlocked: Unlock PIN code.• Locked: If entered PIN code id correct, PIN is locked.To edit PIN code:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 9. SIM Security.2. Enter the four-digit lock code. The default lock code is the last 4 digits of your phone number.3. Press 1. PIN Code, 2. Edit PIN Code.4. Enter New PIN code, then press the OK Key [SET].SIM LOCKLock the SIM.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 9. SIM Security.2. Enter the four-digit lock code. The default lock code is the last 4 digits of your phone number.3. Press 2. SIM Lock.4. Select one of the following settings, then press the OK Key [SET].• Unlocked: If entered SIM code id correct, SIM is unlocked.• Locked: Lock SIM code.SYSTEM SELECTYou can set your phone to search or roam on another network when you are not in your home area. Leave this setting as default unless you want to alter the system selection as instructed by your service provider.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 10. System Select.2. Select 1. Network Mode , 2. CDMA Settings or 3. GSM Settings, then press the OK Key .• Network Mode: For network mode, set CDMA Mode, GSM Mode or Global Mode. • CDMA Settings: For CDMA, set Automatic B, Automatic A or Home Only.• GSM Settings: Set GSM Mode. The automatic setting can be displayed as Automatic B and Automatic A depending on PRL.NAM SELECTIONEnables Auto NAM (Number Assignment Modules) or manually selects a NAM.AUTO NAMAutomatically switches the phone to proper NAM when you have multiple NAM registrations.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 11. NAM Selection.2. Select 1. Auto NAM, then press the OK Key .3. Select On or O, then press the OK Key [SET].CHANGE NAM1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 7. Phone Settings, 11. NAM Selection.2. Select 2. Change NAM, then press the OK Key .3. Select NAM 1 or NAM 2, then press the OK Key [SET].](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-52.png)
![102 103 01020305060704CALL SETTINGSANSWER OPTIONSTo determine how to answer an incoming call:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 8. Call Settings, 1. Answer Options.2. Select Slide Open, Any Key or Auto w/Handsfree then press the OK Key [MARK]. Slide Open is the default setting for this device.3. Press the Left Soft Key [Done]. • When the phone is closed, Auto with Handsfree mode will not function, except when a headset is connected.• Auto with Handsfree will function after about ve seconds.• Auto with Handsfree is available only when a headset or handsfree device is connected.• To answer all incoming calls, press the SEND Key .AUTO RETRYTo set a period of time the phone waits before automatically redialing when an attempted call fails:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 8. Call Settings, 2. Auto Retry.2. Select one of the following settings, then press the OK Key [SET].10 Seconds / 30 Seconds / 60 Seconds / OTTY MODEYou can attach a TTY device to your phone enabling you to communicate with parties also using a TTY device. A phone with TTY support is able to translate typed characters to voice. Voice can also be translated into characters and then displayed on the TTY.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 8. Call Settings, 3. TTY Mode.2. Select one of the following settings, then press the OK Key [SET].TTY Full / TTY + Talk / TTY + Hear / TTY OONE TOUCH DIALTo initiate a speed dial call by holding down the speed dial digit:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 8. Call Settings, 4. One Touch Dial. 2. Select On or O, then press the OK Key [SET]. If One Touch Dial is disabled, a speed dial call will function by entering the speed dial number on the QWERTY Keypad, and then press the SEND Key .VOICE PRIVACYVoice Privacy provides advanced voice encryption to prevent eavesdropping. To turn the voice privacy feature On or O:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 8. Call Settings, 5. Voice Privacy.2. Select On or O, then press the OK Key [SET].DTMF TONESTo set the Key Tone length and touch tone playback speed:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 8. Call Settings, 6. DTMF Tones.2. Select one of the following settings, then press the OK Key [SET].• Normal: Sends out a tone for a xed period of time even if you continue to press the key.• Long: Sends out a continuous tone for the duration the key is pressed and held. The setting of DTMF Tones are changed to Normal in GSM.ASSISTED DIALINGAssisted dialing allows easy dialing of international calls while roaming in another country. 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings &](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-53.png)
![104 105 01020305060704Tools, 8. Call Settings, 7. Assisted Dialing.2. Press the Directional Key left or right to select On or O. To view the help for Assisted Dialing, press the Right Soft Key [Help].3. When you set Assisted Dialing to On, press the Directional Key down and then press the Left Soft Key [Set] to edit Reference Country.4. Select the desired Country and press the the Left Soft Key [Details].• Country Code: Populated based on Reference Country and MCC lookup table.• IDD Prex: Populated based on Reference Country and MCC lookup table.• NDD Prex: Populated based on Reference Country and MCC lookup table.• Area/City Code: Default is determined by rst three digits of MDN.• National Number Length: Default is determined by MDN length. All of the attributes shall be editable and savable. There shall be an option to restore default attributes.5. Press the OK Key [Save] to set Assisted Dialing.MEMORYSAVE OPTIONSTo select whether to save to Phone Memory or to Card Memory when saving les:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 9. Memory, 1. Save Options.2. Select 1. Pictures, 2. Videos or 3. Sounds, then press the OK Key .3. Select Phone Memory or Card Memory, then press the OK Key [SET].PHONE MEMORYAllows you to manage the memory usage for pictures, videos, ringtones, music, sounds and contacts on your Phone Memory.PHONE MEMORY USAGETo check the available Phone Memory capacity, used capacity and total capacity: 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 9. Memory, 2. Phone Memory.2. Press 1. Phone Memory Usage.3. Press the OK Key to return to the previous screen.DELETING AND MOVING FILESTo delete les stored in Phone Memory or to move les from Phone Memory to Card Memory: 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 9. Memory, 2. Phone Memory.2. Press the Directional Key up or down to select 2. My Pictures, 3. My Videos, 4. My Ringtones, 5. My Music, 6. My Sounds or 7. My Contacts then press the OK Key .3. Press the Right Soft Key [Options].4. Select 1. Erase to delete a le or 2. Move to move a le to Card Memory, then press the OK Key . If you have selected My Contacts, you can select 1. View, 2. Copy or 3. Erase after pressing the Right Soft Key [Options]. 5. Select a le, press the OK Key [MARK] or the Right Soft Key [Mark All], then press the Left Soft Key [Done].6. Select Yes and press the OK Key MOVING ALL FILESTo move all les saved in Phone Memory to Card Memory (memory card sold separately). 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 9. Memory, 2. Phone Memory.2. Select 8. Move All To Card, then press the OK Key .3. Select Yes and press the OK Key . Do not remove the memory card from the phone while a le or les are being moved to Card Memory.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-54.png)
![106 107 01020305060704CARD MEMORYAllows you to manage the memory usage for pictures, videos, music, sounds and contacts on your Card Memory. The memory card (sold separately) must be inserted into the phone to perform these functions.CARD MEMORY USAGETo check the available Card Memory capacity, used capacity and total capacity: 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 9. Memory, 3. Card Memory.2. Press 1. Card Memory Usage.3. Press the OK Key to return to the previous screen.FORMAT CARDTo format the card inserted: 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 9. Memory, 3. Card Memory.2. Press 1. Card Memory Usage, then press the Right Soft Key [Options].3. Press 1. Format Card, enter your 4-digit lock code.4. Select Yes and press the OK Key .DELETING AND MOVING FILESTo delete les stored in Card Memory or to move les from Card Memory to Phone Memory: 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 9. Memory, 3. Card Memory.2. Press the Directional Key up or down to select 2. My Pictures, 3. My Videos, 4. My Ringtones, 5. My Music, 6. My Sounds or 7. My Contacts then press the OK Key .3. Press the Right Soft Key [Options].4. Select 1. Erase to delete a le or 2. Move to move a le to Phone Memory, then press the OK Key . If you have selected My Contacts, you can select 1. View, 2. Copy or 3. Erase after pressing the Right Soft Key [Options].5. Select a le, press the OK Key [MARK] or the Right Soft Key [Mark All], then press the Left Soft Key [Done].6. Select Yes and press the OK Key .MOVING ALL FILESTo move all les saved in Card Memory to Phone Memory: 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 9. Memory, 3. Card Memory.2. Select 8. Move All To Phone, then press the OK Key .3. Select Yes and press the OK Key . Do not remove the memory card from the phone while a le or les are being moved to Card Memory.USB MODEYou can use a USB data cable to transfer data between the device and a compatible PC. Important: To activate your device for data transfer, select USB Mode before connecting the USB data cable.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 10. USB Mode.2. Select Modem Mode, Mass Storage or Ask On Plug, then press the OK Key [SET].• Modem Mode: Allows you to use your phone as a modem for your computer when connecting with a USB data cable.• Mass Storage: Allows you to use your phone as a mass storage for your computer when connecting with a USB data cable.• Ask On Plug: Allows you to select USB Mode whenever the USB data cable is connected from your computer to your phone. • Even if Ask On Plug is set for USB Mode, you may not be asked to select USB Mode](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-55.png)
![108 109 01020305060704while receiving/making a call, using Bluetooth®, transferring data, etc.• To use End User Upgrade Tool, select Modem Mode for USB Mode.PHONE INFOMY NUMBERTo view your phone number:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 11. Phone Info, 1. My Number.2. The following information appears:Mobile Device Number (MDN) / Mobile Identication Number (MIN) / Other device informationSW/HW VERSIONTo view your device HW/SW information:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 11. Phone Info, 2. SW/HW Version.2. Software Version / PRL Version / ERI Version / Browser Version / Media Center Version / MSUI Version / HW Version / MEID / Software Update Client are displayed.3. Press the OK Key to return to the previous screen.ICON GLOSSARYTo view all the icons and their meanings:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 11. Phone Info, 3. Icon Glossary.2. Press the OK Key to return to the previous screen. Please refer to Display Indicators on page 13 for more details about the icons.SOFTWARE UPDATEThe Software Update option allows you to download and update the software in your phone automatically. Only the internal software is updated; Contact entries or other information saved to your phone will NOT be deleted.STATUSCheck the latest Software Download/Update status. 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 11. Phone Info, 4. Software Update.2. Press 1. Status.CHECK NEWTo check Download Server for new Software updates: 1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 11. Phone Info, 4. Software Update.2. Press 2. Check New.OPERATING SYSTEMTo view information about your phone’s operating system:1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 11. Phone Info, 5. Operating System.SIM INFOTo view your SIM information.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools, 12. SIM Info.SET UP WIZARDThe Set up Wizard menu allows you to set the following menus for Settings & Tools with simple operation.1. Slide the phone up, press the OK Key [MENU], then press 9. Settings & Tools.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-56.png)
![110 5Your phone provides a unique feature - Media Center - that enablesyou to download ringtones, wallpapers, games and more from yournetwork to your phone. Please contact your service provider for theavailability of these services.MEDIA CENTERAppsSearchMusic & TonesPicture & VideoBrowserCHAPTER 5. MEDIA CENTERMEDIA CENTER2. Select 13. Set up Wizard, then press the OK Key .• CALL SOUNDS: Select Ring Only, Vibrate Only, Ring and Vibrate or Be Silent, then press the OK Key [SET] or press the Right Soft Key [Skip] to go to the next setting. If you select Ring Only or Ring and Vibrate, the ringtone selection screen will be displayed. Select a desired ringtone, then press the OK Key [SET]. • DISPLAY THEMES: Select White, Knight or Green Nomad, then press the OK Key [SET] or press the Right Soft Key [Skip] to go to the next setting. To preview the selected display theme, press the Left Soft Key [Preview].• MENU LAYOUT: Select Tab, List and Grid, then press the OK Key [SET] or press the Right Soft Key [Skip] to go to the next setting. To preview the selected Main Menu Layout, press the Left Soft Key [Preview].• CLOCK FORMAT: Select Analog, Large Analog, Dual Analog, Digital 12, Large Digital 12, Digital 24, Large Digital 24, Dual Digital or O , then press the OK Key [SET] or press the Right Soft Key [Skip] to complete set up. To preview the selected clock format, press the Left Soft Key [Preview].](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-57.png)
![112 113 01020304060705APPSTo download tools that can help you navigate to entertainment spots, restaurants, andprovide you with up-to-date weather information:1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center,1. Apps.2. Select SHOP APPS, then press the OK Key .SEARCH1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 2. Search.MUSIC & TONESThe Music & Tones menu allows you to mange ringtones, music and sound les.MY RINGTONESTO PLAY DOWNLOADED TUNES OR TONES:1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 3. Music & Tones, 1. My Ringtones.2. Select the tune or tone you want to play, then press the OK Key [PLAY].3. To stop, press the OK Key [STOP].TO ASSIGN DOWNLOADED TUNES OR TONES:1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 3. Music & Tones, 1. My Ringtones.2. Select the desired ringtone, then press the Left Soft Key [Set As].3. Select one of the following options, then press the OK Key .• 1. Ringtone: Set as a ringtone. A conrmation message appears.• 2. Contact ID: The SET AS CONTACT ID screen appears. Select the Contact you want to assign the ringtone to, then press the OK Key .• 3. Alert Sounds: Press the corresponding number key to set the ringtone for one of the following: All Messages / Text Message / Pic/Video/Voice Mes... /VoicemailMY MUSICMy Music menu allows you to playback and manage music les stored in your phone’s memory and on a memory card (sold separately).1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 3. Music & Tones, 2. My Music.2. Select one of the following options and press the OK Key .• All Songs: Allows you to view or play all songs. • Playlists: Allows you to create or view playlists. Once you have created playlists, you can play songs by playlists.• Artists: Allows you to view or play your songs by artists.• Genres: Allows you to view or play your songs by genres.• Albums: Allows you to view or play your songs by albums.• Manage My Music: Allows you to manage your music les with following options: Erase / Lock / Unlock / Move To Card / Move To Phone• Music Settings: Allows you to set following player settings: Repeat / Shue / Sound Eects / Player Skin / Music Only ModeNATIVE MUSIC PLAYERAlbum jacket imageFile & Artist infoVolume valueShuffle / Repeat Key GuidePlay time / Total TimePlay Status BarIndexPlaying Icon](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-58.png)
![114 115 01020304060705Icon NameDescriptionsVolume value Indicates current music volume levelPrevious / Next Press: Previous, NextPress and Hold: Rewind, Fast ForwardPause/Play Indicates player’s statusRepeatRepeat AllRepeat OneOffShuffle OnOffMY SOUNDSTo select a desired sound:1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 3. Music & Tones, 3. My Sounds.2. Highlight the desired sound, then press the OK Key [PLAY] to hear the sound. Press the OK Key [STOP] to stop playing the sound.3. Press the Right Soft Key [Options] to access the following options:• Send: Allows you to send the sound with a picture message.• Send Via Email: Allows you to send the sound Via Email.• To Online Album: Allows you to upload the selected tone to the online server.• Rename: Renames the sound.• Move: Allows you to move the selected sound to the memory card or the phone. This option only appears if a memory card is inserted.• Erase: Deletes the sound.• Erase All: Deletes all the sounds from your phone.• File Info: Displays information about the selected sound. Preloaded sound options: Send, To Online Album and File info. The preloaded sounds cannot be erased or renamed.RECORDING NEW SOUNDS1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 3. Music & Tones, 3. My Sounds.2. Press 1. Record New.3. Press the OK Key to begin recording. When done, press the OK Key [STOP] to nish recording. The recording is automatically saved to your My Sounds list.4. Your recording is saved with a number. To rename your recording, scroll to it with the Directional Key in the My Sounds menu, then press the Right Soft Key [Options].5. Press 4. Rename.6. Press and hold the CLR Key to erase the number, enter the new name for your recording, then press the OK Key .SETTING SOUNDS1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 3. Music & Tones, 3. My Sounds.2. Select the sound you want to set, press the Left Soft Key [Set As], then select one of the following options and press the OK Key .• Ringtone: Set as a ringtone. A conrmation message appears.• Contact ID: The SET AS CONTACT ID screen appears. Select the Contact you want to assign the ringtone to, then press the OK Key .• Alert Sounds: Press the corresponding number key to set the ringtone for one of the following options: All Messages / Text Messages / Pic/Video/Voice Mes... /Voicemail](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-59.png)
![116 117 01020304060705PICTURE & VIDEOMY PICTURESThe My Pictures menu allows you to view all the pictures you have taken, store selected images in your phone, send pictures to the Online Album, delete images and access additional picture options.1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 4. Picture & Video, 1. My Pictures.2. Select the desired picture, then press the Right Soft Key [Options] to access the following options.• Send: Allows you to send a picture with following options: Picture Message / To Online Album / Via Email / Via Bluetooth• Set As: Assigns the selected picture to display for specic tasks (Wallpaper / Picture ID).• Take Picture: Take a new picture.• Manage Pictures: To manage your picture les with following options: Erase / Lock / Unlock / Move to Phone / Move to Card• Rename: Rename the selected picture.• File Info: Displays the following information about the selected picture: Name / Date / Time / Resolution / File SizeDELETING A PICTURE1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 4. Picture & Video, 1. My Pictures.2. Select the picture you want to erase, then press the Left Soft Key [Erase]. 3. “ERASE PICTURE FROM MY PICTURES AND SETTINGS?” will appear on your display.4. Select Yes and press the OK Key . A conrmation message appears.MY VIDEOSThe My Videos menu allows you to view all the videos you have recorded, store selected videos in your phone, send videos to the Online Album, delete videos and access additional video options.1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 4. Picture & Video, 2. My Videos.2. Select the desired video, then press the Right Soft Key [Options] to access the following options.• Send: Allows you to send a picture with following options: Video Message / To Online Album / Via Bluetooth / Via Email• Record Video: Record a new video.• Set As Video ID: Set the selected video as a contact ID.• Manage Videos: To manage your video les with following options: Erase / Lock / Unlock / Move to Phone / Move to Card• Rename: Rename the selected video.• File Info: Displays the following information about the selected video: Name / Date / Time / Duration / File SizeTAKE PICTURE1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 4. Picture & Video, 3. Take Picture. If the keypad is locked, unlock the keypad by pressing the OK Key . Press the Camera Key to access the camera viewnder.2. Point the camera lens at your subject. You can check the picture framing through the display screen.• Press the Directional Key left or right to zoom in or out (except when resolution is set to 1600x1200).• Press the Right Soft Key [Options], and choose from the following:1. Resolution: 1600X1200 / 1280x960 / 640x480 / 320x240 / 160x1202. Self Timer: O / 3 Seconds / 5 Seconds / 10 Seconds3. Brightness: Press the Directional Key left or right to adjust the brightness from the following: -2 / -1 / 0 / +1 / +2](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-60.png)
![118 119 010203040607054. White Balance: Press the Directional Key left or right to select from the following: Auto / Sunny / Cloudy / Tungsten / Fluorescent 5. Shutter Sound: Allows you to select the shutter sound from the following: Shutter / Silent / Say “Cheez” / Ready! 1236. Color Eects: Press the Directional Key left or right to select color eects from the following: Normal / Antique / Black and White / Negative7. Capture Mode: Set the capture mode to take picture from the following: Landscape / Portrait8. Memory: Set the memory to save the captured picture from the following: Phone / Card3. Press the OK Key [TAKE] to take the picture.4. After taking the picture, it will be displayed. To save the picture, press the Left Soft Key [Save]. To take another picture without saving the picture you just took, press the Right Soft Key [Erase]. To send the picture to someone, press the OK Key [SEND].RECORD VIDEO1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 4. Picture & Video, 4. Record Video. If the keypad is locked, unlock the keypad by pressing the OK Key . Press and hold the Camera Key to access the video camera viewnder. To switch from the video camera to camera or vice versa, press the Camera Key .2. Point the camera lens at your subject. You can check the video framing through the display screen.• Press the Directional Key left or right to zoom in or out.• Press the Right Soft Key [Options] and choose from the following:1. Brightness: Press the Directional Key left or right to adjust the brightness from the following: -2 / -1 / 0 / +1 / +22. White Balance: Press the Directional Key left or right to select from the following: Auto / Sunny / Cloudy / Tungsten / Fluorescent 3. Shutter Sound: Allows you to turn Shutter Sound Shutter or Silent.4. Recording Time: Limit the recording time to 15 Seconds for Video MSG or 1 Hour for Save.5. Memory: Set the memory to save the recorded le from the following: Phone / Card3. Press the OK Key [REC] to record a video. When nished recording, press the OK Key [STOP].4. After recording the video, press the Left Soft Key [Save] to save the video. To record another video without saving the video you just recorded, press the Right Soft Key [Erase]. To send the video to someone, press the OK Key [SEND].DELETING A VIDEO1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 4. Picture & Video, 2. My Videos.2. Select the video you want to erase, then press the Left Soft Key [Erase].3. “ERASE VIDEO FROM MY VIDEOS?” will appear on your display.4. Select Yes and press the OK Key . A conrmation message appears.ONLINE ALBUMTo access Online Album:1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 4. Picture & Video, 5. Online Album.2. Follow the on-screen prompts.BROWSERNow you can access news, sports, weather and Email from your phone. Browser keeps you updated by providing access to up-to-date information when you subscribe to Internet service with your service provider. Please contact your service provider for a list of available websites and service details.1. Slide the phone up, press the OK Key [MENU], then press 1. Media Center, 5. Browser.2. Follow the on-screen prompts.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-61.png)
![121 010203040607056This chapter addresses Voicemail, TXT, Picture, Video, Voice Messaging functions including:When a New Message ArrivesNew MessageInboxSentDraftsVoice MailMobile ImMobile EmailSettingsCHAPTER 6. MESSAGINGMESSAGING MESSAGINGWHEN A NEW MESSAGE ARRIVES1. The following display appears when a new message arrives.2. To display the message, select View Now and then press the OK Key .NEW MESSAGETEXT MESSAGE1. Slide the phone up, press the Left Soft Key [Message], then select 1. New Message. Or slide the phone up, press the OK Key [MENU], then press 2. Messaging, 1. New Message.2. Press 1. Text Message. Shortcut: From idle mode, press the TXT Composer Key .3. Under To, input the phone number or email address of the recipient, then press the OK Key .• By pressing the Right Soft Key [Add], you can choose from the following:1. From Contacts: Search for a phone number which is stored in the Contact List.2. Recent Calls: Search for a phone number which is stored in the Recent Calls menu.3. Groups: Search for a group stored in the Groups menu.4. To Contacts: Save the number or email address to the Contact List that you have entered in the To eld.4. Under Text, input your message.• By pressing the Right Soft Key [Options], you can choose from the following:1. Insert Quick Text: Inserts prede ned sentences in the text message.2. Save As Draft: Save the text message to Drafts.3. Add: Allows you to add a Graphic, Sound, Name Card or Address From Contacts. 4. Format Text: Allows you to edit Alignment, Font Size, Font Style, Font Color or Background Color. 5. Priority Level: Select High or Normal, then press the OK Key .6. Cancel Message: Cancel the message and select whether to save it in Drafts.5. When completed, press the OK Key [SEND] to send the text message.NEW TEXT MESSAGE](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-62.png)
![122 123 01020304060705 When navigating through the Messaging menu, press the Right Soft Key [Options] to display the following available options.• Erase Inbox: Allows you to delete unlocked messages stored in the Inbox.• Erase Sent: Allows you to delete unlocked messages stored in Sent.• Erase Drafts: Allows you to delete unlocked messages stored in Drafts.• Erase All: Allows you to delete unlocked messages stored in your phone.PICTURE MESSAGE1. Slide the phone up, press the OK Key [MENU], then press 2. Messaging, 1. New Message.2. Press 2. Picture Message.3. Under To, input the phone number or email address of the recipient, then press the OK Key .• By pressing the Right Soft Key [Add], you can choose from the following:1. From Contacts: Search for a phone number which is stored in the Contact List.2. Recent Calls: Search for a phone number which is stored in the Recent Calls menu.3. Groups: Search for a group stored in the Groups menu.4. Send to Online Album: Send the picture message to your Online Album.5. To Contacts: Save the number or email address to the Contact List that you have entered in the To eld.4. Under Text, input your message, then press the Directional Key down.5. Under Picture, press the Left Soft Key [My Pics] to select the picture you would like to send, then press the OK Key . Press the Directional Key down.6. Under Sound, press the Left Soft Key [Sounds] to select the sound you would like to send, then press the OK Key . Press the Directional Key down.7. Under Name Card, press the Left Soft Key [Add], select 1. My Name Card or 2. From Contacts, then press the OK Key . Select the desired card and press the OK Key . Press the Directional Key down.8. Under Subject, input the message subject.9. Press the Right Soft Key [Options] to access the following:• Preview: Shows the picture message before it is sent.• Save as Draft: Save the picture message to Drafts.• Insert Quick Text: Inserts predened sentences in the picture message.• Add Slide: Allows you to insert multiple picture messages.• Priority Level: Select High or Normal, then press the OK Key .• Cancel Message: Cancel the message and select whether to save it in Drafts.10. When completed, press the OK Key [SEND] to send the picture message.VIDEO MESSAGE1. Slide the phone up, press the OK Key [MENU], then press 2. Messaging, 1. New Message.2. Press 3. Video Message.3. Under To, input the phone number or email address of the recipient, then press the OK Key .• By pressing the Right Soft Key [Add], you can choose from the following:1. From Contacts: Search for a phone number which is stored in the Contact List.2. Recent Calls: Search for a phone number which is stored in the Recent Calls menu.3. Groups: Search for a group stored in the Groups menu.4. Send to Online Album: Send the video message to your Online Album.5. To Contacts: Save the number or email address to the Contact List that you have entered in the To eld.4. Under Text, input your message, then press the Directional Key down.5. Under Video, press the Left Soft Key [My Videos] to select the video you would like to send, then press the OK Key . Press the Directional Key down.6. Under Name Card, press the Left Soft Key [Add], select 1. My Name Card or 2. From Contacts, then press the OK Key . Select the desired card, press the OK Key . Press the Directional Key down.7. Under Subject, input the message subject.8. Press the Right Soft Key [Options] to access the following:](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-63.png)
![124 125 01020304060705• Preview: Shows the video message before it is sent.• Save as Draft: Save the video message to Drafts.• Insert Quick Text: Inserts predened sentences in the video message.• Priority Level: Select High or Normal, then press the OK Key .• Cancel Message: Cancel the message and select whether to save it in Drafts.9. When completed, press the OK Key [SEND] to send the video message.VOICE MESSAGE1. Slide the phone up, press the OK Key [MENU], then press 2. Messaging, 1. New Message.2. Press 4. Voice Message.3. Press the OK Key to start recording a voice memo, then press the OK Key [STOP] to nish recording and insert the voice memo into the voice message.4. Under To, input the phone number or email address of the recipient, then press the OK Key .• By pressing the Right Soft Key [Add], you can choose from the following:1. From Contacts: Search for a phone number which is stored in the Contact List.2. Recent Calls: Search for a phone number which is stored in the Recent Calls menu.3. Groups: Search for a group stored in the Groups menu.4. Send to Online Album: Send the voice message to your Online Album.5. To Contacts: Save the number or email address to the Contact List that you have entered in the To eld.5. Under Text, input your message, then press the Directional Key down.6. Under Name Card, press the Left Soft Key [Add], select 1. My Name Card or 2. From Contacts, then press the OK Key . Select the desired card, press the OK Key . Press the Directional Key down.7. Under Subject, input the message subject.8. Press the Right Soft Key [Options] to access the following:• Review: Shows the voice message before it is sent.• Save as Draft: Save the voice message to Drafts.• Insert Quick Text: Inserts predened sentences in the voice message.• Priority Level: Select High or Normal, then press the OK Key .• Cancel Message: Cancel the message and select whether to save it in Drafts.10. When completed, press the OK Key [SEND] to send the voice message.INBOXThe Inbox menu is displayed when Messages View is set to By Time. The Inbox manages received text, picture, voice, video and web alert messages.1. Slide the phone up, press the OK Key [MENU], then press 2. Messaging, 2. Inbox.2. Select a message and press the OK Key [OPEN] to view the message. To delete the message, press the Left Soft Key [Erase], select Yes, then press the OK Key .3. Press the Directional Key left or right to view the previous or next message.4. To reply to the sender, press the OK Key [REPLY], select 1. Text Message, 2. Picture Message, 3. Video Message or 4. Voice Message, then press the OK Key .5. When navigating through the Inbox menu, press the Right Soft Key [Options] to display the following available options. Options are dependent on the message type and may be dierent from each eld.• Reply: Allows you to reply to the recipient.• Reply w. copy: Allows you to reply to the recipient including the original message.• Forward: Forwards the message to another recipient.• Add To Contacts: Saves the phone number to the Contact List.• Extract Addresses: Allows you to extract contacts from the message, then you can save them to the Contact List, make a call or send the message.• Message Info: Shows the message information.• Manage Inbox: Allows you to manage messages with following options:Erase: Deletes the messages.Lock: Locks the messages.Unlock: Unlocks the messages.Mark as Read: Marks the messages as read.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-64.png)
![126 127 01020304060705Mark as Unread: Marks the messages as unread.• Sort By Sender: Sorts the list by sender.• Sort By Time: Sorts the list by time.• Sort By Size: Sorts the list by size.• View By Contacts: Changes the Messages View setting to By Contacts.• Play Again: Replays the sound attached to a picture or voice message.• Erase: Deletes the message.• Save Picture: Allows you to save the attached picture to your phone.• Save Graphic: Allow you to save the attached graphic to your phone.• Save Sound: Allows you to save the attached sound to your phone.• Save Video: Allows you to save the attached video to your phone.• Save as Ringtone: Allows you to save the sound to your phone as ringtone.• View Name Card: Shows the attached name card.• Save Name Card: Allows you to save the attached name card to your phone.• Set As: Allows you to set the attached picture as Wallpaper or Picture ID, and attached sound as Ringtone, Contact ID or Alert Sounds.• Save As Quick Text: Allows you to save the received message as quick text.• Lock / Unlock: Locks or unlocks the message.SENTThe Sent menu is displayed when Messages View is set to By Time. Sent manages already sent or waiting to be sent messages.1. Slide the phone up, press the OK Key [MENU], then press 2. Messaging, 3. Sent.2. Select a message and press the OK Key [OPEN] to view the message. To delete the message, press the Left Soft Key [Erase], select Yes, then press the OK Key .3. Press the Directional Key left or right to view the previous or next message.4. To send the message, press the OK Key [SEND].5. When navigating through the Sent menu, press the Right Soft Key [Options] to display the following available options. Options are dependent on the message type and may be dierent from each eld.• Reply to All: Allows you to reply to all senders.• Forward: Forwards the message to another recipient.• Resend: Resends the message.• Lock / Unlock: Locks or unlocks the message.• Add To Contacts: Saves the phone number to the Contact List.• Erase Sent: Allows you to delete unlocked messages stored in Sent.• Message Info: Shows the message information.• Play Again: Replays the sound attached to a picture or voice message.• Erase: Deletes the message.• Save As Quick Text: Allows you to save the received message as quick text.• View Name Card: Shows the attached name card.DRAFTSThe Drafts menu manages draft messages. If message composition is interrupted by a voice call or other events, the message being composed is automatically saved in Drafts.1. Slide the phone up, press the OK Key [MENU], then press 2. Messaging, 4. Drafts.2. Select a message and press the OK Key [EDIT] to edit the message. To delete the message, press the Left Soft Key [Erase], select Yes, then press the OK Key .3. When navigating through Drafts menu, press Right Soft Key [Options] to display the following available options.• Send: Sends the message.• Lock: Locks or unlocks the message.• Add To Contacts: Saves the phone number to the Contact List.• Erase Drafts: Allows you to delete unlocked messages stored in Drafts.ERASE ALLTo erase all messages stored in your phone:1. From the home screen, press OK Key [MENU], then select 2. Messaging.2. Press the Right Soft Key [Options] to display the following available](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-65.png)
![128 129 01020304060705options.• Erase Inbox/Sent: Select All Messages or Only Read Messages, then press the OK Key .• Erase Drafts: Select Yes or No, then press the OK Key .• Erase All:Select All Messages including Unread or All except Unread Messages, then press the OK Key .3. A conrmation message appears. Slide theLocked messages cannot be erased.VOICE MAILThe Voicemail menu shows the number of new voicemail message recorded in your voicemail box.1. Slide the phone up, press the OK Key [MENU], then press 2. Messaging, 5. Voicemail.2. To delete information about new voicemail, press the Left Soft Key [Clear], select Yes, then press the OK Key .ACCESSING YOUR VOICEMAIL BOX1. Slide the phone up, press the OK Key [MENU], press 2. Messaging, 5. Voicemail, then press the OK Key [Call]. Or dial *86 and press the SEND Key .2. Follow the prompts to enter your password and retrieve your messages. Shortcut: Slide the phone up, press and hold 1 to access your voicemail box.MOBILE IMMobile IM menu allows you to send and receive instant messages using one of the following messenger services:• AIM• WL Messenger• Yahoo!®LAUNCHING MOBILE IM1. Slide the phone up, press the OK Key [MENU], then press 2. Messaging, 6. Mobile IM.2. Follow the on-screen prompts.EMAILThe Email menu allows you to send and receive Email using Browser.1. Slide the phone up, press the OK Key [MENU], then press 2. Messaging, 7. Mobile Email.2. Select Mobile Email or Mobile Web Mail, then press the OK Key .• Mobile Email: Connects to Browser via Brew Smartlink.• Mobile Web Mail: Connects to Mobile Web via Browser.3. Follow the on-screen prompts.SETTINGSThe Settings menu allows you to congure settings for messages sent or received on your phone. To access message settings:1. Slide the phone up, press the OK Key [MENU], then press 2. Messaging.2. Press the Left Soft Key [Settings] to display available menus.3. Select one of the following menus, then press the OK Key .MESSAGES VIEW1. Select By Time or By Contact, then press the OK Key .• By Time: Sorts received and sent messages into Inbox and Sent folders by time.• By Contact: Groups all received and sent messages by each contact.ENTRY MODEAllows you to set the default Entry Mode for messaging. For example, if Abc mode is set to Entry Mode, its icon will appear in the text entry eld as default.1. Select Abc, ABC or 123, then press the OK Key .](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-66.png)
![130 131 01020304060705AUTO SAVE SENT1. Select On, O or Prompt, then press the OK Key .• On: All sent messages are saved in Sent.• O: All sent messages are not saved in Sent.• Prompt: The Yes or No dialogue box will be displayed after sending a message.AUTO ERASE INBOXAllows you to set whether Inbox messages are deleted automatically when new messages arrive and Inbox is full.1. Select On or O, then press the OK Key .• On: The oldest message will be deleted from the Inbox automatically once full.• O: The oldest message will not be deleted automatically from the Inbox once full.MESSAGING FONT SIZEAllows you to set the message font size.1. Select Small, Normal or Large, then press the OK Key .TXT AUTO VIEW1. Select On or O, then press the OK Key .• On: TXT messages are displayed automatically when received.• O: TXT messages are displayed by going into the Inbox, or by responding to the message prompt.MULTIMEDIA AUTO RECEIVE1. Select On or O, then press the OK Key .• On: Picture, Video and Voice messages are downloaded automatically.• O: Picture, Video and Voice messages must be retrieved from the Inbox or by responding to the message prompt.QUICK TEXTAllows you to create a new Quick Text or edit the predened Quick Text.1. To create a new Quick Text, press the Right Soft key [Options], then press 1. New. Enter the new text and press the OK Key [SAVE].2. To edit the predened Quick Text, select the Quick Text from the list, then press the OK Key [EDIT].3. To change the Quick Text position, press the Right Soft Key [Options], then press 2. Move. Press the Directional Key up or down to scroll to desired position, then press the OK Key [SAVE].4. To erase a saved Quick Text, press the Left Soft Key [Erase]. Select Yes and press the OK Key .VOICEMAIL #1. Enter a new voicemail number or edit the voicemail number then press the OK Key .2. Press the Left Soft Key [Add], then press 1. Wait or 2. 2-Sec Pause. Please refer to page 30 for more details on WAIT/ PAUSE FEATURE.CALLBACK #Allows you to use or edit the default callback number so that the recipient can callback or reply.1. Select On or O, then press the OK Key .2. If On is selected, enter a new callback number then press the OK Key .SIGNATUREAllows you to create a signature that can be automatically inserted at the end of each message.1. To deactivate Signature function, select None and press the OK Key .2. To insert a Signature, select Custom, enter your signature in the text entry eld then press the OK Key .DELIVERY RECEIPTAllows you to set delivery receipts for sent messages.1. Select On or O, then press the OK Key .• On: Request to receive the delivery acknowledgement.• O: Do not request to receive the delivery acknowledgement.](https://usermanual.wiki/Pantech-Co/BUDDY.Users-Manual/User-Guide-1466035-Page-67.png)
