Pantech Co C510 4Band GSM850/900/DCS1800/PCS1900 (w.WAP/GPRS/EDGE) User Manual C510

Download:
Mirror Download [FCC.gov]
Document ID	758064
Application ID	e1SamwzNOVodSv2OG5eOJQ==
Document Description	Supplemental Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.7kB (21243 bits)
Date Submitted	2007-02-12 00:00:00
Date Available	2007-03-29 00:00:00
Creation Date	2007-02-09 12:50:05
Producing Software	Acrobat PDFWriter 5.0 for Windows NT
Document Lastmod	2007-02-09 12:50:39
Document Title	C510 User Manual.doc
Document Creator	C510 User Manual - Microsoft Word
Document Author:	courtenay

population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and
of the HAC Act is to ensure reasonable access to telecommunications
had been tested in accordance with the measurement procedures specified
services for persons with hearing disabilities.
in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std. 1528-2003
Ministry of Health (Canada), Safety Code 6. The standards include a
While some wireless phones are used near some hearing devices (hearing
substantial safety margin designed to assure the safety of all persons,
aids and cochlear implants), users may detect a buzzing, humming, or
regardless of age and health. The exposure standard for wireless mobile
whining noise. Some hearing devices are more immune than others to this
phones employs a unit of measurement known as the Specific Absorption
interference noise, and phones also vary in the amount of interference they
Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg *.
generate.
* In the U.S. and Canada, the SAR limit for mobile phones used by the
public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The
The wireless telephone industry has developed a rating system for wireless
standard incorporates a substantial margin of safety to give additional
phones, to assist hearing device users find phones that may be compatible
protection for the public and to account for any variations in.
with their hearing devices. Not all phones have been rated. Phones that
are rated have the rating on their box or a label located on the box.
**This device contains 1800 MHz GSM functions that are not operational in
U.S. Territories; this filing is applicable only for 850 MHz GSM and 1900
The ratings are not guarantees. Results will vary depending on the user’s
MHz PCS operations.
hearing device and hearing loss. If your hearing device happens to be
vulnerable to interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing device is the best way
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless
to evaluate it for your personal needs.
Devices
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely
On July 10, 2003, the U.S. Federal Communications Commission (FCC)
to generate less interference to hearing devices than phones that are not
Report and Order in WT Docket 01-309 modified the exception of wireless
labeled. M4 is the better/higher of the two ratings.
phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to
require digital wireless phones be compatible with hearing-aids. The intent
98
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to
The M mark is intended to be synonymous with the U mark. The T mark is
generate less interference to hearing devices than phones that are not
intended to be synonymous with the UT mark. The M and T marks are
labeled. T4 is the better/higher of the two ratings.
recommended by the Alliance for Telecommunications Industries Solutions
(ATIS). The U and UT marks are referenced in Section 20.19 of the FCC
Hearing devices may also be rated. Your hearing device manufacturer or
Rules. The HAC rating and measurement procedure are described in the
hearing health professional may help you find this rating. Higher ratings
American National Standards Institute (ANSI) C63.19 standard.
mean that the hearing device is relatively immune to interference noise.
The hearing aid and wireless phone rating values are then added together.
To ensure that the Hearing Aid Compatibility rating for your phone is
A sum of 5 is considered acceptable for normal use. A sum of 6 is
maintained, secondary transmitters such as Bluetooth and WLAN
considered for best use.
components must be disabled during a call. See Page XX for instructions
to disable these components.
In the above example, if a hearing aid meets the M2 level rating and the
wireless phone meets the M3 level rating, the sum of the two values equal
M5. This is synonymous for T ratings. This should provide the hearing aid
user with “normal usage” while using their hearing aid with the particular
wireless phone. “Normal usage” in this context is defined as a signal quality
that is acceptable for normal operation.
99

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:02:09 12:50:39-05:00
Create Date                     : 2007:02:09 12:50:05-05:00
Title                           : C510 User Manual.doc
Author                          : courtenay
Creator                         : C510 User Manual - Microsoft Word
Producer                        : Acrobat PDFWriter 5.0 for Windows NT
Page Count                      : 2
Mod Date                        : 2007:02:09 12:50:39-05:00
Creation Date                   : 2007:02:09 12:50:05-05:00
Metadata Date                   : 2007:02:09 12:50:39-05:00

EXIF Metadata provided by EXIF.tools