Pantech COACH Dual-Band CDMA Phone User Manual
Pantech Co., Ltd. Dual-Band CDMA Phone Users Manual
Pantech >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1219395 |
| Application ID | UfeyAR6SP3ugwu5oMmvg/Q== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 55.11kB (688865 bits) |
| Date Submitted | 2009-12-27 00:00:00 |
| Date Available | 2010-06-22 00:00:00 |
| Creation Date | 2009-12-03 13:16:56 |
| Producing Software | Acrobat Distiller 8.0.0 (Windows) |
| Document Lastmod | 2009-12-22 13:28:16 |
| Document Title | êµë¬¸ 매뉴얼 ìž‘ì—… 기초안 |
| Document Creator | Acrobat PDFMaker 8.0 for Word |
| Document Author: | suni |
COACH USER MANUAL Thank you for choosing the Coach, our latest mobile phone. The Coach has many features designed to enhance your mobile experience. From its EZ to read menus, to its sleek, stylish design, we know you will enjoy the entire Coach experience. This User Guide contains important and useful information that will maximize your familiarity with all that the Coach has to offer. Specifications Design Clamshell phone with internal and external display Displays 260k colors TFT LCD with 2.2” internal display 4 gray STN LCD with 1.04” external display 5 lines for text in basic mode with 22 point font Two soft keys and four-way scroll and selection OK keys Melodies MP3, WMA, EVRC, QCP, MIDI, SP-MIDI Camera Integrated VGA (300k) CMOS Camera Resolution up to 640 x 480 (330,000 pixels) Self-timer function (5 seconds or 10 seconds) Photo album Dimensions & Weight Weight: 100 g (with standard battery) 3.52 oz Dimensions: 98 mm x 50 mm x 20.2 mm 3.85 » X 1.96 » X 0.79 » Power Management (Performance) Battery Type Standard Lithium-Ion (Li-ion) Capacity Up to 920 mAh Standby Time Up to 250 hours Talk Time Up to 3 hours Phone overview Speaker Earpiece Camera Speaker phone key Side key Internal display Alarm key Zoom key Picture album key Left/Right Soft key Perform the functions VRC key Navigation key Scroll through the menu options Camera key shown at the bottom line of the display. OK key Press to enter menu system Emergency call key One-touch Quick Call Send key Voicemail Power on&off/Menu exit key/End key Turns phone on/off, ends calls, exits menus Internal antenna External display Clear key Prefix international call key Returns to previous screen or deletes characters in text mode. NOTE: Holding device at internal antenna area might affect call quality reception. Vibrate mode Microphone 6. Menu overview Settings Media Gallery Contacts 1. Picture Box 1. Emergency Contact 2. Camera 2. Contact List 3. Sound Box 3. Add Contact 4. Edit Contact 5. Erase Contact 6. Groups 7. Speed Dials 8. My Name & Number easyedge 1. easyedge Tools 1. Alarm Clock 2. Calculator Recent Calls 3. Tip Calculator 1. All Calls 4. Calendar 2. Missed Calls 5. Voice Memo 3. Dialed Calls 6. Stop Watch 4. Received Calls 7. World Clock 5. Call Timers 8. Notepad Messaging Wizard 1. Create Message 1. Voice Commands 2. Inbox 2. Help Balloon 3. Sent 3. Clear Hearing 4. Draft 5. Voicemail Sound Settings 9 1. Ringtone 2. Volume Level 3. Keypad Volume 4. Voice Commands 5. Message Alert 6. Missed Call 7. Advanced Phone Settings 1. Display Settings 2. Call Settings 3. Advanced 4. Phone Info ** Network dependent Quick & Easy Keys Functions Perform the functions shown at the bottom line of the display by using these soft keys. Scroll through the menu options in Menu mode. In standby mode, Left Scroll: Access Calendar menu Right Scroll: Access Messaging menu Up Scroll: Access easyedge menu Down Scroll: Access Calculator menu Select a menu function or store user-input information, such as names. Also use this key for confirmation as the [OK] key. Delete characters from the display, or return to previous menu. Make or receive a call. Show the recent call list in standby mode. Re-dial the last call number if pressed and held in standby mode. Complete the current call. Turn on/off the phone if pressed and held. Cancel user input and return to standby mode while in Menu mode. Quickly connect to the voice mail server if pressed and held in standby mode. Enters numbers, letters or special characters. Go to the dial screen if pressed in standby mode. Enter or exit from vibrate mode if pressed and held in standby mode. Enter a space if pressed and held in text input mode. Work in Word search mode if pressed in the Predictive text input mode. Enter the + sign prefix for international dialing if pressed and held. Change various text input modes if pressed and held at the text-editing screen. Adjust the earpiece volume while making a call. Control the Ringtone volume, vibrate mode and silent all mode in standby. Mute the ringtone of an incoming call. Turn camera capture mode on. Work as a camera shutter in capture mode. Access to AVR menu Zoom in/out the font when entering Turn the speaker mode on/off Set the alarm mode Enter to the photo album Available to contact most important 3 persons in case of emergency Make a emergency call Contents Caller identification .................................................................................. 21 Voice Command (VR) .............................................................................. 21 Using your headset.................................................................................. 22 Specifications.......................................................... 3 Phone overview....................................................... 4 3. Messaging ..........................................................23 Messaging................................................................................................ 24 Menu overview ........................................................ 5 Receiving messages................................................................................ 24 Quick & Easy ........................................................... 7 Creating and sending text messages ...................................................... 25 1. Getting Started .................................................. 10 Creating a multimedia message .............................................................. 25 Battery ..................................................................................................... 11 Message template ................................................................................... 25 Turn on/off the phone .............................................................................. 11 Message settings..................................................................................... 26 Essential display indications.................................................................... 12 4. Multimedia ..........................................................27 EZ quick call keys .................................................................................... 12 Camera .................................................................................................... 28 Entering text............................................................................................. 12 Photo album............................................................................................. 29 2. Calls & address book........................................ 15 Sound album............................................................................................ 29 Making, receiving and ending a call ........................................................ 16 5. Useful Features..................................................31 Options during a call................................................................................ 17 Alarm........................................................................................................ 32 Checking all calls ..................................................................................... 18 Calculator and tip calculator .................................................................... 32 Speed dialing ........................................................................................... 19 Calendar .................................................................................................. 32 Call Setting .............................................................................................. 19 Voice memo and notepad ........................................................................ 33 Using address book................................................................................. 20 Stopwatch ................................................................................................ 33 Help balloon............................................................................................. 34 Clear hearing ........................................................................................... 34 6. Settings .............................................................. 35 Ringtones and alert ................................................................................. 36 Decorating the display ............................................................................. 36 Language................................................................................................. 36 Locks and reset ....................................................................................... 37 Information............................................................................................... 37 8. Appendix ............................................................ 38 SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES ....... 39 SAFETY INFORMATION FOR FCC RF EXPOSURE............................. 42 SAR INFORMATION ............................................................................... 42 HEARING AID COMPATIBILITY (HAC) FOR WIRELESS TELECOMMUNICATIONS DEVICES ..................................................... 43 FDA CONSUMER UPDATE .................................................................... 44 AVOID POTENTIAL HEARING LOSS..................................................... 49 FCC COMPLIANCE INFORMATION ...................................................... 50 12 Month Limited Warranty...................................................................... 51 1. Getting Started Battery Turn on/off the phone Essential display indications EZ quick call keys Entering text battery to upwards (1) and remove (2) the battery. Battery About your battery To charge your battery Your phone uses a Li-Ion battery. Make sure to use an authorized battery and charger only. For more details, please inquire at your nearest dealer. 1. To charge, open the protective cover on the top left side and connect the charger adapter. The arrow on the charger have to face the top of NOTE: Your phone is powered by a Lithium Ion (Li-Ion) battery. This means the phone. that, unlike other forms of battery technology, you can recharge your battery while some charge remains without reducing your phone’s autonomy due to the “battery memory effect” inherent in those technologies. 2. To remove the adapter connection press the adapter’s side buttons(1) and pulling the adapter Installing/removing SIM card and battery away(2). 1. Remove the battery cover from the unit. To fit the battery cover, put it on the guide rail and push up. Turn on/off the phone 2. Put the contacts of the battery into the hole located at the bottom of the unit insert and 1. Press and hold [ press the upper side of the battery until you hear the “click”. 3. To remove the battery push the bottom of the To turn on To turn off 1. Press and hold [ ] in red color. ] in red color. 2. Select one of Contact 1, Contact 2 or Contact 3. 3. Press ASSIGN > From Contact. Essential display indications 4. Select a contact > OK. Signal strength. The greater the number of bars, the stronger the signal. When network is in searching mode is displayed. Flight mode is active (Menu > Phone Settings > Advanced > Airplane Mode) A call is being made Incoming calls set to ring only (Ringtone) Incoming calls set to Vibrate Only Incoming calls set to Silent Received text message Received text message and voice message Received voice message An alarm is set Set the location mode on Set the TTY mode to TTY Full/TTY + Talk/TTY + Hear Received missed call Battery strength. When the battery charge is low, displayed * Network dependent To assign a new contact 1. Press [ ]. 2. Select one of Contact 1, Contact 2 or Contact 3. 3. Press ASSIGN > Add Contact. 4. Enter the information in the fields and press SAVE. To use call using one touch key 1. Press [ ]. 2. Select the name > CALL. is EZ quick call keys Getting in touch with those you call most is now as EZ as 1-2-3. To reassign contact 1. Press [ ]. 2. Select the name > ASSIGN. 3. Select From Contacts or Add Contacts. Note: The following direction is an example with assigning Contact 1. The The steps are as same as ‘To assign exist contact’ or ‘To assign a new usage of Contact 2 and Contact 3 key will be same as the following. contact’. To assign a exist contact Entering text 1. Press [ You can enter text with multi-tap, predictive, numeric or symbol. ]. Predictive mode (Word) Useful keys Press to view the next matching word in predictive mode Adding space Press to change capital mode. Press to change ab Ab AB and press and hold to change from multi to predictive to Number to Symbol The predictive mode automatically compares your keystrokes with an Multi-tap (all small caps / first letter caps /all caps) 1. Press and hold [ Predictive (all small caps / first letter caps / all caps) Number Symbols internal linguistic dictionary to determine the correct word. The most commonly used word will appear first. To use word mode, press Abc > Word. 2. Press [ press [ ] to change the mode as Word. ] to [ ][ ] to input text. For example, to write ‘hello’ ][ ][ ][ ]. Key characters by language Alphabet input mode Each of the following keys will scroll through these sequential options listed Press the key labeled with the target letter once for the first letter; press it by language. twice for the second letter, and so on. key English .@?!-,&:‘/1 abc2 def3 ghi4 jkl5 mn6o pqrs7 tuv8 wxyz9 Spanish 1. Press and hold [ aábc2 deéf3 ghiÍ4 2. Press [ press [ ] to [ ] to change the mode as Abc. ] to input text repeatedly. To write the letter “C”, ] 3 times. To write number 2 press [ mnñoó6 Numeric mode You can input numbers in this mode. 1. Press and hold [ 2. Press [ ] to [ ] to change the mode as 123. ] and [ ] to input numbers. ] 4 times. Symbol mode You can input symbols. 1. Press Abc > Symbols to change the mode as symbols. 2. Select the symbols using [ / / / ].. 2. Calls & address book Making, receiving and ending a call Options during a call Checking all calls Speed dialing Call Setting Using address book Caller identification Voice Command (VR) Using your headset Making a call during a call 1. Enter the phone number. Making, receiving and ending a call 2. Press [ Making a call on hold. 1. Enter the area code and phone number. 2. Press [ ] to dial the second call. The first call is automatically put Switching between two calls ]. 1. Press [ ]. Answering a call Making an international call 1. Press [ ]. 1. Press and hold [ Ending a call 1. Press [ character appears. 2. Type the country code, area code, and phone number. ]. 3. Press [ Once the call is completed, a call summary is displayed. 1. Press Emergency Number. ] or Ignore. 2. Press [ Making a call using call list Settings > Advanced > Location. 1. Press [ 2. Select All Calls, Missed Calls, Received Calls, or Dialed Calls by ] to display the Recent Calls list. Replying to a missed call** 1. Press View to display the list of missed calls. pressing the [ / ]. Select a number. 4. Press [ 2. Select a number to call by pressing the [ / ]. 3. Press [ ] to dial the selected number. NOTE: To redial the last number in the Recent Calls list, press [ ]. Note: To set the location emergency number, press Menu >Phone Your phone logs up to 90 dialed, received and missed call numbers. 3. ]. Making an emergency call Rejecting a call 1. Press [ ] key for the international prefix until the ‘+’ ]. ]. Answering a second call** Returning to a held call 1. Press [ ]. The first call is automatically put on hold. 1. Press [ 2. Press [ ] to end the second call. The call on hold is automatically reconnected. ] again. Adding a pause / wait Pauses are used for automated systems (i.e., voice mail or calling cards). Options during a call Insert a pause after a phone number and then enter another group of numbers. The second set of numbers is dialed automatically after the Microphone off and on pause. This feature is useful for dialing into systems that require a code. Switching your phone’s microphone off Adding pause 1. Press Mute. 1. Enter the phone number. 2. Press Options > Add 2-Sec Pause. The phone waits 2 seconds Switching your phone’s microphone back on 1. Press Unmute. Talking on speaker 1. Press the [ ] to turn on the speaker. To turn off the speaker, press the before sending the next string of digits automatically. Adding wait 1. Enter the phone number. 2. Press Options > Add Wait. The phone stops dialing until you press the ] again. Putting a call on hold and return** ] to advance the next number. 3-way calling** You can talk up to 2 person or conference call. Putting a call on hold 1. Press [ ]. Making 3-way call 1. Call the first participant. 2. Call the second participant. The first call is automatically put on hold. Writing a message during a call 3. Press [ ]. 4. When the second party is connected, press [ ] again. Note: If one of the people you called hangs up during your call, you and the remaining caller stay connected. If you initiated the call and are the first to hang up, all three calls are disconnected. Searching a number in address book during a call 1. Press Option > New Messaging. 2. Select Text Message or Picture Message. For details on creating a text message, see page 25. NOTE: During the call, you can only send text messages. Picture messages cannot be sent, but can be saved. 1. Press Options > Contact List. 2. Select a number > [ ]. Searching for a name or group in address book Enter the first letters of the name for Name Search. The entries are displayed starting with the first entry matching your input. Finding a name manually in address book 1. Press the [ / ] key. Viewing the details of highlighted entry in address book Checking all calls You can view information about all Recent Calls. Press [ Recent Calls. Viewing all calls 1. Press Menu > Recent Calls > All Calls. Viewing missed calls 2. Press Menu > Recent Calls > Missed Calls. 1. Press OK. For details on address book, see page 19. Reading a message during a call Viewing dialed calls 1. Press Menu > Recent Calls > Dialed Calls. 1. Press Options > Main Menu > Messaging. Viewing received calls 2. Press Inbox > select a message 1. Press Menu > Recent Calls > Received Calls. ] to view all Viewing call time Removing from speed dial 1. Press Menu > Recent Calls > Call Timers. 1. Press Menu > Contacts > Speed Dials. 2. Press [ / ] to view Last Call, All Calls, Received Calls, Dialed Calls, 2. Select an assigned entry and press Remove > Yes. Roaming Calls, Last Reset and Lifetime Calls. Call Setting Resetting all call times Setting answering options 1. Press Menu > Recent Calls > Call Timers. 2. Press Reset All > Yes. 1. Press Menu > Phone Settings > Call Setting. 2. Press Answer Options 3. Select Flip Open or Any Key. Speed dialing NOTE: you can answer with any key except [ Reject. You can dial quickly using speed dialing. Up to 98 phone numbers can be programmed using numbers 2 to 99. ] : Voice mail Setting speed dial Setting speed dialing 1. Press Menu > Phone Settings > Call Setting. 2. Press Speed Dial Call. 3. Select Press Hold Digit or Digit + Send. 1. Press Menu > Contacts > Speed Dials. 2. Select an empty entry and press ASSIGN. 3. Select a person and press OK > Yes. Changing speed dialing person Setting auto redial 1. Press Menu > Phone Settings > Call Setting. 2. Press Auto Retry. 3. Select the time > OK. . 1. Press Menu > Contacts > Speed Dials. 2. Select an assigned entry and press ASSIGN > Yes. 3. Select a person and press OK. ] in red color and Using address book Sending message from contact list You can save names, phone numbers, and information on the phone. 1. Press Menu > Contacts > Contact List. 2. Select a contact > Options > Send Message. 3. Select Text Message or Picture Message. Adding a contact 4. Write the message > SEND. 1. Press Menu > Contacts > Add Contact. 2. Enter the information at the fields. Deleting a contact 3. Press Save. 1. Press Menu > Contacts > Contact List. Viewing contact list 2. Select a contact > Options > Erase Contact. 1. Press Menu > Contacts > Contact List. Searching for a phone number 1. Press Menu > Contacts > Contact List. 2. Input the first letter or two of the person's name and scroll with [ / ]. 3. Press VIEW to view detail information. 4. To update information press EDIT. Making a groups 1. Press Menu > Contacts > Groups. 2. There will be defaulted groups. 3. To add new group, press New. 4. Enter new group name > SAVE. 5. To erase a group, press Options > Erase Group. Calling from contact list 1. Press Menu > Contacts > Contact List. 2. Select a person to call. 3. Press [ ] in green color. Adding members to a group 1. Press Menu > Contacts > Groups 2. Select a group > Add. 3. Select the contact > MARK > Done. Note: To add more contacts after a contact is added to a group, select a group > Options > Add. Sending a group message 1. Press Menu > Contacts > Groups. 2. Select a group > Options > Send Message. 3. Select Text Message or Picture Message. 4. Write the message > SEND. Caller identification Caller identification** Caller ID displays the number of the person calling when your phone rings. If the caller’s identity is stored in Contacts, the name appears on the screen. The caller ID is stored in the Recent Calls. follow the voice prompts. You can say the name of the command after you hear a beep. Tutorial 1. Press Tutorial. Tutorial will provide you with additional information on using voice recognition. Call1. Say Call . Your phone will ask you to confirm the name you said. Say “Yes“, if it was repeated correctly. The person’s phone number will be dialed. If there is more than one number saved for contact, you will be asked to confirm which number to dial. Send text Voice Command (VR) 1. Say Send Text . (Examples: - Send Text Tom Smith) Your phone is equipped with an VR (Voice Recognition) feature. This For details on creating a text message, see page 25. feature allows you to make calls or use the phone’s functions by simply using your voice. All you have to do is talk into the phone, and the phone will recognize your voice and complete tasks by itself. Using VR (Voice Recognition) 1. Press [ ]. 2. The phone displays the Command menu and prompts you to say the name of the command you want to use. To complete your task, simply Send picture 1. Say Send Picture . (Examples: - Send Picture Tom Smith) For details on creating a text message, see page 25. Lookup 1. Say Lookup . (Examples: - Lookup Tom Jones) 1. Press Settings > Speakerphone. 2. The View Contact page will be displayed for the contact name. 2. Select Automatic, Always On or Always Off > OK. Check - Setting VR about 1. Say Check followed immediately by one of the items: (Status, 1. Press Settings > About. Voicemail, Messages, Missed Calls, Time, Signal Strength, 2. The VSuite version appears. Network, Battery Level, My Phone Number or Volume) Using your headset Setting VR settings You can send or receive a call using your headset. Setting VR confirmation You can control whether the system asks you to confirm a name or number. 1. Press Settings > Confirmation. 2. Select Automatic, Always Confirm or Never Confirm > OK. Setting VR adaptation 1. Press Settings > Adaptation > Adapt Voice. 2. Press Start. When you connect your headset to the jack the button on the headset works as follows. Note: You need to use the headset designed for this device and it is optional item. Also not every headset has a button. While in standby mode 1. Press the button once to list recent calls. 2. Press the button twice to redial the last call. Setting VR modes While the phone is closed Use modes to set the level of audio assistance. 1. Press the button once to receive a call. 1. Press Settings > Audio Modes. 2. Press the button once to end the call. 2. Select Expert Mode, Prompt Mode or Readout Mode > OK. Setting VR speakerphone You can control the speakerphone behavior when voice recognition is started. 3. Messaging Messaging Receiving messages Creating and sending text messages Creating a piecture message Message template Message settings 3. To reply, press > Reply. Messaging Saving number or e-mail from received message 1. Press Menu > Messaging > Inbox. You can send, receive and save the text message and picture message. 2. Select a received message > VIEW. 3. Press Options > Save. Deleting a message 4. Select Add New Contact or select Update Existing. 5. Edit contact information > SAVE. 1. Press Menu > Messaging > Inbox. 2. Select a message > Options > Erase > Yes. Saving the object in the received picture message Replying to a message 1. Press Menu > Messaging > Inbox. 2. Open the picture message. 1. Press Menu > Messaging > Inbox. 2. Select a message > View > Reply. 3. Select an object > Options. 4. Select Saved Picture, Save Sound, Save As Ringtone, Save As Phrase or Save Nave Card. Receiving messages It will be saved in one of the categories in the Picture Box folder. For details on photo album, see page 35. Viewing a new message 1. Press View. Listening to voice messages 1. Press and hold [ Reading a message from the inbox 1. Press Menu > Messaging > Inbox. 2. Select a received message > OK. ] or press Menu > Messaging > Voicemail. It will automatically call the voice mail center. Creating and sending text messages 6. Press [ ] to attach Picture, Sound or Name Card. 7. Press Options > Add Slide > select the file to attach > SEND. Sending new text message 8. To preview the message, press Options > Preview. 1. Press Menu > Messaging > Create Message > Text Message. 2. Enter the phone number or press Options > Add From Contacts. 3. Select the contact > MARK > Done. Message template 4. Press OK > NEXT to write the message. When you often use the same phrases, you can save the message under 5. Write the message > SEND. template messages. NOTE: All successfully send messages will save in Sent. Adding the existing template Finding all sent messages 1. Press Menu > Messaging > Create Message > Picture Message. 1. Press Menu > Messaging > Sent. 2. Press Options > Add Phrase. 3. Select the sentence > SELECT. Creating a picture message Adding new template You can create new picture message. Capacity is 1Mb and will alert you 1. Press Menu > Messaging > Settings > Phrase. once that is exceeded via error message. 2. Press Options > Add New 3. Enter the new phrase > SAVE. Adding saved picture to the message Editing the existing template 1. Press Menu > Messaging > Create Message > Picture Message. 1. Press Menu > Messaging > Setting > Phrase. 2. Enter the phone number or press Options > Add From Contacts. 2. Select the sentence > Edit. 3. Select the contact > MARK > Done. 3. Edit sentence > SAVE. 4. Press OK > NEXT to write the message. 5. Write a message. Message settings Setting default editing mode 1. Press Menu > Messaging > Settings > Entry Mode. 2. Select Word, Abc, ABC or 123 > OK. Setting to save sent message 1. Press Menu > Messaging > Settings > Auto Save Sent. 2. Select On, Off or Prompt > OK. Setting automatically erase message 1. Press Menu > Messaging > Settings >Auto Erase. 2. Select On or Off. Setting callback number 1. Press Menu > Messaging > Settings > Callback #. 2. Select On or Off. Setting signature 1. Press Menu > Messaging > Settings > Signature. 2. Select On or Off. 4. Multimedia Camera Photo album Sound album In options menu for camera Camera You can take pictures and record movies using the built-in camera. The Name Description Image Size 1280x960( Image Quality Low, Medium, High ), 640x480( ), 320x240( photos clips can be saved and sent via picture message. Icons for camera Icon Name Capture Mode Capture Mode Zoom Size Zoom Description 640x480: x1, x2 320x240: x1, x2, x4 NOTE: Zoom tool is disabled when the picture size set for 1280x960. Zoom in and out 1. Press [ / ]. Taking a picture Capture 1. Press [ ] in standby mode or press Menu > Media gallery > Camera. 2. Focus on the object > OK. Setting camera settings 3. To save, press SAVE. 4. To view the taken picture, press Gallery. 1. Press [ ] in standby mode or press Menu > Media gallery > Camera. 2. Press Options to change settings prior to taking a picture. NOTE: Your photo will be saved automatically to Media gallery > Picture Box. Viewing the taken picture 1. Press Menu > Media gallery > Picture Box. 2. Select the picture > VIEW. Sending pictures using picture message 1. Press Menu > Media Gallery > Picture Box. After taking pictures To Press Send a picture message Options > Send as Multimedia MSG Set as wallpaper Options > Set as > Wallpaper Set as picture identification Options > Set as > Picture ID View taken picture Options > Go to Media Gallery 2. Select a picture > Send. For details on creating a picture message, see page 25. Sound album You can download Photo album Listening the sound You can view, send, save and delete photos. JPEG, GIF, BMP and PNG 1. Press Menu > Media Gallery > Sound Box. format is supported. 2. Select a sound > PLAY. 3. To stop playing, press STOP. Viewing the saved pictures Setting as ringtone 1. Press Menu > Media Gallery > Picture Box. 2. Select a picture > VIEW. 1. Press Menu > Media Gallery > Sound Box. 2. Select a sound > Set as > Ringtone. Setting as wallpaper in the display Setting as contact’s ringtone 1. Press Menu > Media Gallery > Picture Box. 2. Select a picture > Options > Set as > Wallpaper. 1. Press Menu > Media Gallery > Sound Box. 2. Select a sound > Set as > Contact ID. 3. Select a contact > OK. Setting as alert 1. Press Menu > Media Gallery > Sound Box. 2. Select a sound > Set as > Alert Sounds. Viewing the sound information 1. Press Menu > Media Gallery > Sound Box. 2. Select a sound > Options > File Info. 5. Useful Features Alarm Calculator and tip calculator Calendar Voice memo and notepad Stopwatch 3. To clear, press Clear. 4. Press [ Alarm 5. Press [ ] to use the decimal point. ] to use plus or minus. Note: To use open or close parenthesis, press Operator. Setting an alarm Using tip calculator 1. Press Menu > Tools > Alarm Clock. 2. Select On or Off using [ / ]. 1. Press Menu > Tools > Tip Calculator. 3. Set the time 2. Enter values for all variable fields (Total Bill($), Tip(%), Split) and the 4. Select Once, Daily, Monday through Friday or Weekends using [ / ]. 5. Press Set > select the sound > OK > SAVE. Note: You can only set 3 alarms. corresponding calculation fields (Tip($), Total($)) are updated automatically. 3. Press Reset to reset. Viewing the saved alarms 1. Press Menu > Tools >Alarm Clock. Calendar Editing existing alarms Calendar helps you manage your schedule including your time for calls or special days. You can set a reminder on any given date with this function. 1. Press Menu > Tools > Alarm Clock. 2. Select an alarm > EDIT. Viewing calendar 3. Edit the alarm settings. 4. To reset an alarm > Options > Reset. Calculator and tip calculator Using the calculator 1. Press [ ] in standby mode or press Menu > Tools > Calculator. 2. Enter the numbers and press [ / / / OK] to calculate. 1. Press [ ] in standby mode or press Menu > Tools > Calendar. NOTE: Monthly view is displayed as default. Voice memo and notepad In the monthly view To Press Move to another day [ ] for Previous Move to another week Recording voice memo [ ] for Next 1. Press Menu > Tools > Voice Memo. [ ] for Previous 2. Press OK for new recording. [ ] for Next 3. Press OK to stop recording. Listening the recorded sound Creating a new event 1. Press Menu > Tools > Voice Memo.. 1. Press [ ] in standby mode or press Menu > Tools > Calendar. 2. Select a sound > OK. 2. Select a day > Add. 3. To pause, press Pause. 3. Enter information at the fields > SAVE. Note: You can create up to 32 scheduled events. Note. You can create events for dates from 01/01/2000 to 12/31/2049. Using notepad 1. Press Menu > Tools > Notepad. Editing an event 2. Press New. 1. Press [ ] in standby mode or press Menu > Tools > Calendar. 3. To edit memo press VIEW > EDIT. 2. Select a day > VIEW >VIEW. 4. Press Save to save. 3. Enter new information at the fields > Save. Erasing an event Stopwatch 1. Press [ ] in standby mode or press Menu > Tools > Calendar. Using stopwatch 2. Select a day > Erase > Yes. 1. Press Menu > Tools > Stopwatch. 2. Press START to start. 3. Press STOP to stop. 4. To record lap time, press Cont. 2. Press Pitch Adjustment. 5. Press Record > Reset to clear. 3. Select On or Off. Help balloon Using help balloon 1. Press Menu > Wizard > Help Balloon. 2. Select Always On, OK Key Use or Off. Clear hearing Using noise suppressor 1. Press Menu > Wizard > Clear Hearing. 2. Press Noise Suppressor. 3. Select On or Off. Using slow speech 1. Press Menu > Wizard > Clear Hearing. 2. Press Slow Speech. 3. Select Always On, AVR Key Use or Off. Using pitch adjustment 1. Press Menu > Wizard > Clear Hearing. 6. Settings Ringtones and alert Decorating the display Language Locks and reset Information Setting menu layout Ringtones and alert 1. Press Menu > Phone Settings > Display Setting. 2. Press Menu Layout. Setting ringtones 3. Select List or Grid. 1. Press Menu > Sound Settings > Ringtone. 2. Select the ringtone > OK. Setting alert for message 1. Press Menu > Sound Settings > Message Alert. 2. Select the alert > OK. Setting time for display backlight 1. Press Menu > Phone Settings > Display Setting. 2. Press Backlight > Display. 3. Select the time > OK. Note: Modifying backlight time may affect battery life. Setting alert for missed calls Setting time for display backlight 1. Press Menu > Sound Settings > Missed Call. 2. Select Once, Every 2 Minutes, Every 15 Minutes or Off > OK. 1. Press Menu > Phone Settings > Display Setting. 2. Press Backlight > Keypad. 3. Select the time > OK. Decorating the display Language Setting the display Setting up 1. Press Menu > Phone Settings > Display Setting. 2. Press Wallpaper. 3. Select the file > OK. 1. Press Menu > Phone Settings > Advanced > Language. 2. Select the language > OK. Locks and reset Information Locking the phone Viewing phone information 1. Press Menu > Phone Settings > Advanced > Security. 1. Press Menu > Phone Settings > Phone Info. 2. Press Lock Phone Now. . NOTE: The default password is ‘0000. To change the password press Menu > Phone Settings > Advanced > Security > Edit Codes. Setting the phone lock The Personal Identification Number is the security code that protects the phone against unauthorized use. 1. Press Menu > Phone Settings > Advanced > Security. 2. Press Phone Lock Setting. 3. Select Unlocked or On Power Up. Resetting the phone 1. Press Menu > Phone Settings > Advanced > Security. 2. Press Restore Phone. 3. Select Yes. NOTE: It will return configuration settings to default. The default password is ‘0000’. 8. Appendix SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES SAFETY INFORMATION FOR FCC RF EXPOSURE SAR INFORMATION HEARING AID COMPATIBILITY TELECOMMUNICATIONS FDA CONSUMER UPDATE AVOID POTENTIAL HEARING LOSS FCC COMPLIANCE INFORMATION 12 MONTH LIMITED WARRANTY (HAC) FOR WIRELESS 3*: International Commission on Nonionizing Radiation Protection. SAFETY INFORMATION HANDHELD PHONES FOR WIRELESS ANTENNA SAFETY READ THIS INFORMATION BEFORE USING YOUR HANDHELD Use only the supplied or an approved replacement antenna. Unauthorized PORTABLE CELLULAR TELEPHONE antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Please contact your EXPOSURE TO RADIO FREQUENCY SIGNALS Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August 1996, the Federal Communications Commissions local dealer for replacement antenna. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards DRIVING SAFETY previously set by both U.S. and international standards bodies: ANSI C95.1 (1992) * Talking on the phone while driving is extremely dangerous and is illegal in NCRP Report 86 (1986) * some states. Remember, safety comes first. Check the laws and ICNIRP (1996) * regulations on the use of phones in the areas where you drive. Always Those standards were based on comprehensive and periodic evaluations obey them. Also, if using your phone while driving, please: of the relevant scientific literature. For example, over 120 scientists, • Give full attention to driving. Driving safely is your first responsibility. engineers, and physicians from universities, government health agencies, • Use hands-free operation, if available. and industry reviewed the available body of research to develop the ANSI • Pull off the road and park before making or answering a call, if driving Standard (C951). conditions so require. The design of your phone complies with the FCC guidelines (and those If you must use the phone while driving, please use one-touch, speed standards). dialing, and auto answer modes. 1*: American National Standards Institute. An airbag inflates with great force. DO NOT place objects, including both 2*: National Council on Radiation protection and measurements. installed or portable wireless equipment, in the area over the airbag or in interference. the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. WARNING: Failure to follow these instructions may lead to serious • If you have any reason to suspect that interference is taking place, turn your phone OFF immediately. personal injury and possible property damage. HEARING AIDS ELECTRONIC DEVICES Some digital wireless phones may interfere with some hearing aids. In the Your wireless handheld portable telephone is a low power radio transmitter event of such interference, you may want to consult your service provider and receiver. When it is ON, it receives and also sends out radio frequency (or call the customer service line to discuss alternatives). (RF) signals. Most modern electronic equipment is shielded from RF energy. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Therefore, use of your phone OTHER MEDICAL DEVICES must be restricted in certain situations. If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF PACEMAKERS energy. Your physician may be able to assist you in obtaining this information. Turn The Health Industry Manufacturers Association recommends that a your phone OFF in healthcare facilities when any regulations posted in minimum separation of six (6”) inches be maintained between a handheld these areas instruct you to do so. Hospitals or healthcare facilities may be wireless phone and a pacemaker to avoid potential interference with the using equipment that could be sensitive to external RF energy. pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers: VEHICLES • ALWAYS keep the phone more than six inches from your pacemaker RF signals may affect improperly installed or inadequately shielded when the phone is turned on. electronic systems • Do not carry the phone in a breast pocket. in motor vehicles. Check with the manufacturer or its representative • Use the ear opposite the pacemaker to minimize the potential for regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, POSTED FACILITIES clearly marked. They include fueling areas such as gas stations; below Turn your phone OFF where posted notices so require. deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and OTHER SAFETY GUIDELINES AIRCRAFT any other area where you would normally be advised to turn off your vehicle’s engine. FCC regulations prohibit using your phone while in the air. Turn your phone OFF before boarding an aircraft. Always request and obtain prior consent PRECAUTIONS and approval of an authorized airline representative before using your Your Handheld Portable Telephone is a high quality piece of equipment. phone aboard an aircraft. Before operating, read all instructions and cautionary markings on (1) Always follow the instructions of the airline representative whenever using AC/DC Travel Adaptor (2) Battery and (3) Product Using Battery. your phone aboard an aircraft, to prevent any possible interference with Failure to follow the directions below could result in serious bodily injury airborne electronic equipment. and/or property damage due to battery liquid leakage, fire or rupture. • BLASTING AREAS DO NOT use this equipment in an extreme environment where high temperature or high humidity exists. • DO NOT abuse the equipment. Avoid striking, shaking or shocking. To avoid interfering with blasting operations, turn your phone OFF when in When not using, lay down the unit to avoid possible damage due to a “blasting area” or in areas posted: “Turn off two-way radio.” Obey all instability. signs and instructions. POTENTIALLY EXPLOSIVE ATMOSPHERES • DO NOT expose this equipment to rain or spilled beverages. • DO NOT use unauthorized accessories. • DO NOT disassemble the phone or its accessories. If service or repair is required, return unit to an authorized PCD cellular service center. If Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could unit is disassembled, the risk of electric shock or fire may result. • DO NOT short-circuit the battery terminals with metal items etc. website at www.fcc.gov. SAFETY INFORMATION FOR FCC RF EXPOSURE SAR INFORMATION WARNING! READ THIS INFORMATION BEFORE USING THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. CAUTIONS Your wireless phone is a radio transmitter and receiver. It is designed and In August 1996 the Federal Communications Commission (FCC) of the manufactured not to exceed the emission limits for exposure to United States with its action in Report and Order FCC 96-326 adopted an radiofrequency updated safety standard for human exposure to radio frequency Commission of the U.S. Government. These limits are part of electromagnetic energy emitted by FCC regulated transmitters. Those comprehensive guidelines and establish permitted levels of RF energy for guidelines are consistent with the safety standard previously set by both the general population. The guidelines are based on standards that were U.S. and international standards bodies. The design of this phone complies developed by independent scientific organizations through periodic and with the FCC guidelines and these international standards. thorough evaluation of scientific studies. The standards include a (RF) energy set by the Federal Communications substantial safety margin designed to assure the safety of all persons, BODY-WORN OPERATION This device was tested for typical body-worn operations with the back of the phone kept 2 cm. from the body. To maintain compliance requirements, use only belt-clips, holsters or similar accessories that maintain a 2 cm separation distance between the user’s Body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Note: For more information about RF exposure, please visit the FCC regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested protection for the public and to account for any variations in measurements. and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.39 W/Kg and when worn on the body, as described in this user guide, is 0.651 W/Kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all HEARING AID COMPATIBILITY (HAC) FOR WIRELESS TELECOMMUNICATIONS DEVICES PCD’S COMMITMENT PCD believes that all of our customers should be able to enjoy the benefits of digital wireless technologies. We are committed to providing a selection of compatible devices for our customers who wear hearing aids. THIS PHONE HAS A HAC RATING OF M4/T4 meet the government requirement for safe exposure. The SAR testing for Body-worn operation was performed with a belt clip that provided a 20 mm separation. The User’s Manual indicates that any holsters/clips used with this device should contain no metallic components. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea after searching on PP4COACH. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional WHAT IS HEARING AID COMPATIBILITY? The Federal Communications Commission has implemented rules and a rating system designed to enable people who wear hearing aids to more effectively use these wireless telecommunications devices. The standard for compatibility of digital wireless phones with hearing aids is set forth in American National Standard Institute (ANSI) standard C63.19. There are two sets of ANSI standards with ratings from one to four (four being the best rating): an “M” rating for reduced interference making it easier to hear conversations on the phone when using the hearing aid microphone, and a “T” rating that enables the phone to be used with hearing aids operating in the telecoil mode thus reducing unwanted background • noise. HOW WILL I KNOW WHICH WIRELESS PHONES ARE HEARING AID Hearing Loss Association of America – http://www.hearingloss.org/learn/cellphonetech.asp • CTIA – http://www.accesswireless.org/hearingaid/ • Gallaudet University, RERC – http://tap.gallaudet.edu/voice COMPATIBLE? The Hearing Aid Compatibility rating is displayed on the wireless phone box. FDA CONSUMER UPDATE U.S. FOOD AND DRUG ADMINISTRATION - CENTER FOR DEVICES AND RADIOLOGICAL HEALTH CONSUMER A phone is considered Hearing Aid Compatible for acoustic coupling (microphone mode) if it has an “M3” or “M4” rating. A digital wireless phone is considered Hearing Aid Compatible for inductive coupling (telecoil mode) if it has a “T3” or “T4” rating. UPDATE ON WIRELESS PHONES 1. Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of HOW WILL I KNOW IF MY HEARING AID WILL WORK WITH A PARTICULAR DIGITAL WIRELESS PHONE? You’ll want to try a number of wireless phones so that you can decide which works the best with your hearing aids. You may also want to talk with your hearing aid professional about the extent to which your hearing aids are immune to interference, if they have wireless phone shielding, and whether your hearing aid has a HAC rating. radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in FOR MORE INFORMATION ABOUT HEARING AIDS AND DIGITAL WIRELESS PHONE • FCC Hearing Aid Compatibility and Volume Control – http://www.fcc.gov/cgb/dro/hearing.html reproducing those studies, or in determining the reasons for inconsistent results. 2. What is FDA’s role concerning the safety of wireless phones? Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it The National Institutes of Health participates in some inter-agency working does with new drugs or medical devices. However, the agency has group activities, as well. FDA shares regulatory responsibilities for wireless authority to take action if wireless phones are shown to emit radiofrequency phones with the Federal Communications Commission (FCC). All phones energy (RF) at a level that is hazardous to the user. In such a case, FDA that are sold in the United States must comply with FCC safety guidelines could require the manufacturers of wireless phones to notify users of the that limit RF exposure. FCC relies on FDA and other health agencies for health hazard and to repair, replace or recall the phones so that the hazard safety questions about wireless phones. FCC also regulates the base no longer exists. Although the existing scientific data do not justify FDA stations that the wireless phone networks rely upon. While these base regulatory actions, FDA has urged the wireless phone industry to take a stations operate at higher power than do the wireless phones themselves, number of steps, including the following: the RF exposures that people get from these base stations are typically • Support needed research into possible biological effects of RF of the thousands of times lower than those they can get from wireless phones. type emitted by wireless phones; Base stations are thus not the subject of the safety questions discussed in Design wireless phones in a way that minimizes any RF exposure to this document. • the user that is not necessary for device function; and • 3. What kinds of phones are the subject of this update? Cooperate in providing users of wireless phones with the best possible The term “wireless phone” refers here to hand-held wireless phones with information on possible effects of wireless phone use on human health. built-in antennas, often called “cell,” “mobile,” or “PCS” phones. These FDA belongs to an interagency working group of the federal agencies that types of wireless phones can expose the user to measurable have responsibility for different aspects of RF safety to ensure coordinated radiofrequency energy (RF) because of the short distance between the efforts at the federal level. The following agencies belong to this working phone and the user’s head. These RF exposures are limited by Federal group: Communications Commission safety guidelines that were developed with • National Institute for Occupational Safety and Health the advice of FDA and other federal health and safety agencies. When the • Environmental Protection Agency phone is located at greater distances from the user, the exposure to RF is • Federal Communications Commission drastically lower because a person’s RF exposure decreases rapidly with • Occupational Safety and Health Administration increasing distance from the source. The so-called “cordless phones,” • National Telecommunications and Information Administration which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits. 4. What are the results of the research done already? 5. What research is needed to decide whether RF exposure from The research done thus far has produced conflicting results, and many wireless phones poses a health risk? studies have suffered from flaws in their research methods. Animal A combination of laboratory studies and epidemiological studies of people experiments investigating the effects of radiofrequency energy (RF) actually using wireless phones would provide some of the data that are exposures characteristic of wireless phones have yielded conflicting results needed. Lifetime animal exposure studies could be completed in a few that often cannot be repeated in other laboratories. years. However, very large numbers of animals would be needed to A few animal studies, however, have suggested that low levels of RF could provide reliable proof of a cancer promoting effect if one exists. accelerate the development of cancer in laboratory animals. Epidemiological studies can provide data that is directly applicable to However, many of the studies that showed increased tumor development human populations, but 10 or more years’ follow-up may be needed to used animals that had been genetically engineered or treated with cancer- provide answers about some health effects, such as cancer. This is causing chemicals so as to be predisposed to develop cancer in the because the interval between the time of exposure to a cancer-causing absence of RF exposure. agent and the time tumors develop - if they do -may be many, many years. Other studies exposed the animals to RF for up to 22 hours per day. These The interpretation of epidemiological studies is hampered by difficulties in conditions are not similar to the conditions under which people use wireless measuring actual RF exposure during day-to-day use of wireless phones. phones, so we don’t know with certainty what the results of such studies Many factors affect this measurement, such as the angle at which the mean for human health. phone is held, or which model of phone is used. Three large epidemiology studies have been published since December 2000. 6. What is FDA doing to find out more about the possible health Between them, the studies investigated any possible association between effects of wireless phone RF? the use of wireless phones and primary brain cancer, glioma, meningioma, FDA is working with the U.S. National Toxicology Program and with groups or acoustic neu-roma, tumors of the brain or salivary gland, leukemia, or of investigators around the world to ensure that high priority animal studies other cancers. None of the studies demonstrated the existence of any are conducted to address important questions about the effects of harmful health effects from wireless phone RF exposures. However, none exposure to radiofrequency energy (RF). FDA has been a leading of the studies can answer questions about long-term exposures, since the participant in the World Health Organization International Electromagnetic average period of phone use in these studies was around three years. Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs Manufacturers of wireless phones must report the RF exposure level for that has driven the establishment of new research programs around the each world. The Project has also helped develop a series of public information (http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC documents on EMF issues. FDA and the Cellular Telecommunications & identification number on your phone so you can find your phone’s RF Internet Association (CTIA) have a formal Cooperative Research and exposure level in the online listing. model of phone to the FCC. The FCC website Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in 8. What has FDA done to measure the radiofrequency energy coming government, industry, and academic organizations. CTIA-funded research from wireless phones ? is conducted through contracts to independent investigators. The initial The Institute of Electrical and Electronic Engineers (IEEE) is developing a research will include both laboratory studies and studies of wireless phone technical standard for measuring the radiofrequency energy (RF) exposure users. The CRADA will also include a broad assessment of additional from wireless phones and other wireless handsets with the participation research needs in the context of the latest research developments around and the world. “Recommended Practice for Determining the Spatial-Peak Specific 7. How can I find out how much radiofrequency energy exposure I can Absorption get by using my wireless phone? Communications Devices: Experimental Techniques,” sets forth the first All phones sold in the United States must comply with Federal consistent test methodology for measuring the rate at which RF is Communications Commission (FCC) guidelines that limit radiofrequency deposited in the heads of wireless phone users. The test method uses a energy (RF) exposures. FCC established these guidelines in consultation tissue-simulating model of the human head. Standardized SAR test with FDA and the other federal health and safety agencies. The FCC limit methodology is for RF exposure from wireless telephones is set at a Specific Absorption measurements made at different laboratories on the same phone. SAR is Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is the measurement of the amount of energy absorbed in tissue, either by the consistent with the safety standards developed by the Institute of Electrical whole body or a small part of the body. It is measured in watts/kg (or and Electronic Engineering (IEEE) and the National Council on Radiation milliwatts/g) of matter. This measurement is used to determine whether a Protection and Measurement. The exposure limit takes into consideration wireless phone complies with safety guidelines. leadership Rate of FDA scientists and (SAR) expected in to the engineers. Human greatly Body improve The standard, Due the to Wireless consistency of the body’s ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects. 9. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone? the government in the United Kingdom distributed leaflets containing such If there is a risk from these products—and at this point we do not know that a recommendation in December 2000. They noted that no evidence exists there is—it is probably very small. But if you are concerned about avoiding that using a wireless phone causes brain tumors or other ill effects. Their even potential risks, you can take a few simple steps to minimize your recommendation to limit wireless phone use by children was strictly exposure to radiofrequency energy (RF). Since time is a key factor in how precautionary; it was not based on scientific evidence that any health much exposure a person receives, reducing the amount of time spent using hazard exists. a wireless phone will reduce RF exposure.If you must conduct extended conversations by wireless phone every day, you could place more distance 11. What about wireless phone interference with medical equipment? between your body and the source of the RF, since the exposure level Radiofrequency energy (RF) from wireless phones can interact with some drops off dramatically with distance. electronic devices. For this reason, FDA helped develop a detailed test For example, you could use a headset and carry the wireless phone away method to measure electromagnetic interference (EMI) of implanted from your body or use a wireless phone connected to a remote antenna. cardiac pacemakers and defibrillators from wireless telephones. This test Again, the scientific data do not demonstrate that wireless phones are method is now part of a standard sponsored by the Association for the harmful. But if you are concerned about the RF exposure from these Advancement of Medical instrumentation (AAMI). The final draft, a joint products, you can use measures like those described above to reduce your effort by FDA, medical device manufacturers, and many other groups, was RF exposure from wireless phone use. completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone 10. What about children using wireless phones? EMI. FDA has tested hearing aids for interference from handheld wireless The scientific evidence does not show a danger to users of wireless phones and helped develop a voluntary standard sponsored by the Institute phones, including children and teenagers. If you want to take steps to lower of Electrical and Electronic Engineers (IEEE). This standard specifies test exposure to radiofrequency energy (RF), the measures described above methods and performance requirements for hearing aids and wireless would apply to children and teenagers using wireless phones. Reducing phones so that that no interference occurs when a person uses a the time of wireless phone use and increasing the distance between the “compatible” phone and a “compatible” hearing aid at the same time. This user and the RF source will reduce RF exposure. standard was approved by the IEEE in 2000. FDA continues to monitor the Some groups sponsored by other national governments have advised that use of wireless phones for possible interactions with other medical devices. children be discouraged from using wireless phones at all. For example, Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem. The amount of sound produced by a portable audio device varies 12. Where can I find additional information? depending on the nature of the sound, the device, the device settings and For additional information, please refer to the following resources: the headphones. You should follow some commonsense recommendations • FDA web page on wireless phones when using any portable audio device: (http://www.fda.gov/cellphones) • • which you can hear adequately. Federal Communications Commission (FCC) RF Safety Program • (http://www.fcc.gov/oet/rfsafety) • • When using headphones, turn the volume down if you cannot hear the International Commission on Non-Ionizing Radiation Protection people speaking near you or if the person sitting next to you can hear (http://www.icnirp.de) what you are listening to. • World Health Organization (WHO) International EMF Project National Radiological Do not turn the volume up to block out noisy surroundings. If you choose to listen to your portable device in a noisy environment, use (http://www.who.int/emf) • Set the volume in a quiet environment and select the lowest volume at Protection Board noise-cancelling headphones to block out background environmental (UK) noise. (http://www.hpa.org.uk/radiation/) • Limit the amount of time you listen. As the volume increases, less time is required before your hearing could be affected. AVOID POTENTIAL HEARING LOSS • as rock concerts, that might cause temporary hearing loss. Temporary Prolonged exposure to loud sounds (including music) is the most common hearing loss might cause unsafe volumes to sound normal. cause of preventable hearing loss. Some scientific research suggests that using portable audio devices, such as portable music players and cellular telephones, at high volume settings for long durations may lead to permanent noise-induced hearing loss. This includes the use of headphones (including headsets, earbuds and Bluetooth® or other wireless devices). Exposure to very loud sound has also been associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to sound and distorted hearing. Individual susceptibility to noise-induced hearing loss and other potential hearing problems varies. Avoid using headphones after exposure to extremely loud noises, such • Do not listen at any volume that causes you discomfort. If you experience ringing in your ears, hear muffled speech or experience any temporary hearing difficulty after listening to your portable audio device, discontinue use and consult your doctor. YOU CAN OBTAIN ADDITIONAL INFORMATION ON THIS SUBJECT FROM THE FOLLOWING SOURCES: (2) This device must accept any interference received. Including interference that may cause undesired operation. American Academy of Audiology 11730 Plaza American Drive, Suite 300 INFORMATION TO THE USER Reston, VA 20190 Voice: 800-AAA-2336, 703-790-8466 Email: info@audiology.org Internet: www.audiology.org National Institute on Deafness and Other Communication Disorders National Institutes of Health 31 Center Drive, MSC 2320 Bethesda, MD USA 20892-2320 Voice: (301) 496-7243 Email: nidcdinfo@nidcd.nih.gov Internet: http://www.nidcd.nih.gov/health/hearing National Institute for Occupational Safety and Health Hubert H. Humphrey Bldg. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if Not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Increase the separation between the equipment and receiver. 200 Independence Ave., SW Washington, DC 20201 • Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Voice: 1-800-CDC-INFO (1-800-232-4636) Internet: http://www.cdc.gov/niosh/topics/noise/default.html Reorient or relocate the receiving antenna. • Consult the dealer or an experienced radio/TV technician for assistance. FCC COMPLIANCE INFORMATION CAUTION: Changes or modification not expressly approved by the party responsible for Compliance could void the user’s authority to operate the This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and equipment. Connecting of peripherals requires the use of grounded shielded signal cables. Company; (e) 12 Month Limited Warranty original retail purchaser of this handheld portable cellular telephone, that should this product or any part thereof during normal consumer usage and conditions, be proven defective in material or workmanship that results in product failure within the first twelve (12) month period from the date of purchase, such defect(s) will be repaired or replaced (with new or rebuilt parts) at the Company’s option, without charge for parts or labor directly The antenna, keypad, display, rechargeable battery and battery charger, if included, are similarly warranted for twelve (12) months from date of This Warranty extends only to consumers who purchase the product in the subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper whose mechanical serial number or from exposure to moisture, humidity, any electrical source. The Company disclaims liability for removal or reinstallation of the product, for geographic coverage, for inadequate signal reception by the antenna or for communications range or operation of the cellular system as a whole. When sending your wireless device to Personal Communications Devices on the device may be inadvertently erased or altered. Therefore, we strongly recommend you make a back up copy of all data and software resulting includes all contact lists, downloads (i.e. third-party software applications, from remove the card before submitting the device and store for later use when your device is returned, Personal Communications Devices is not connection to, or software, personal information or memory data contained in, stored on, or returned to Personal Communications Devices for repair or service. To obtain repairs or replacement within the terms of this Warranty, the excessive temperatures or extreme environmental conditions; Damage weather conditions, battery leakage, blown fuse, theft or improper usage of integrated with any wireless device, whether under warranty or not, electronic serial number has been removed, altered or defaced. (d) (f) Product damaged from external causes such as fire, flooding, dirt, sand, responsible for and does not guarantee restoration of any third-party installation or repair or improper storage; Damage or In addition, if your wireless device utilizes a SIM or Multimedia card, please This Warranty does not apply to: (c) decorative ringtones, games and graphics) and any other data added to your device. United States or Canada and it is not transferable or assignable. Product cosmetic, contained on your device before submitting it for repair or service. This purchase. (b) appearance, for repair or service, please note that any personal data or software stored related to the defect(s). Product in structural items such as framing and non-operative parts; Personal Communications Devices, LLC. (the “Company”) warrants to the (a) Defects use of any accessory or other product not approved or authorized by the product should be delivered with proof of Warranty coverage (e.g. dated bill of sale), the consumer’s return address, daytime phone number and/or fax number and complete description of the problem, transportation prepaid, to Some states or provinces do not allow limitations on how long an implied the Company at the address shown below or to the place of purchase for warranty lasts or the exclusion or limitation of incidental or consequential repair or replacement processing. In addition, for reference to an damage so the above limitation or exclusions may not apply to you. This authorized Warranty station in your area, you may telephone in the United Warranty gives you specific legal rights, and you may also have other rights, States (800) 229-1235, and in Canada (800) 465-9672 (in Ontario call 416- which vary from state to state or province to province. 695-3060). THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS IN USA:Personal Communications Devices, LLC. WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT 555 Wireless Blvd. PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S Hauppauge, NY 11788 LAIBILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER (800) 229-1235 FOR THE PRODUCT. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY IN CANADA: PCD Communications Canada Ltd. OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, 5535 Eglinton Avenue West SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. Suite# 234 ANY ACTION FOR BREACH OF ANY WARRANTY MUST BE BROUGHT Toronto, ON M9C 5K5 WITHIN A PERIOD OF 18 MONTHS FROM DATE OF ORIGINAL (800) 465-9672 PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR AN SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. THE COMPANY SHALL NOT BE LIABLE FOR THE DELAY IN RENDERING SERVICE UNDER THIS WARRANTY OR LOSS OF USE DURING THE TIME THE PRODUCT IS BEING REPAIRED OR REPLACED. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 8.0.0 (Windows) Company : pantech Source Modified : D:20091202094917 Create Date : 2009:12:03 13:16:56+09:00 Creator Tool : Acrobat PDFMaker 8.0 for Word Modify Date : 2009:12:22 13:28:16+09:00 Metadata Date : 2009:12:22 13:28:16+09:00 Document ID : uuid:b166e606-3ba4-485d-be8f-649e83f479fa Instance ID : uuid:8452a928-0c08-4c0f-9be1-24e443a646ca Subject : 5 Format : application/pdf Creator : suni Title : 국문 매뉴얼 작업 기초안 Page Count : 52 Page Layout : OneColumn Author : suniEXIF Metadata provided by EXIF.tools