Pantech TX-170S Dual-Mode CDMA Phone User Manual TX170SA VERIZON0529
Pantech Co., Ltd. Dual-Mode CDMA Phone TX170SA VERIZON0529
UserManual.wiki
>
Pantech
>
TX 170S User Manual
User Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![ACCESSING THE MENUCH2Your phone can be customized via the menu. Each function can beaccessed by scrolling with the Navigation key or by pressing thenumber that corresponds with the menu item.1To access the menu in the idle mode, press [MENU].2Use the Navigation key to scroll through themenu.3To return to the previous page, press [CLR].To exit the current menu and return to the idlemode, press . 4Press the Navigation key to enter a functionwhen its main page is displayed or press itsassigned number to have direct access to the function.17CH2TURNING THE PHONE ON1Press and hold , until your “Power On” logo appears and the tone sounds.• To select a logo, refer to page 62 for more details.(Settings>Display>Graphics) for more detail.• If your phone is locked when “Password” appears on thedisplay enter your 4-digit password to unlock your phone.• The default password is the last 4 digits of your phone number.16TURNING THE PHONE OFF1Press and hold , until your “Power Off” logoappears.• Immediately change or recharge the battery when “Low Battery Warning Power Off” appears on the display.Memory may possibly be damaged if the phone turns offdue to the battery completely draining.• Turn the phone off before removing or replacing the battery.If the phone is on, unsaved data may be lost.Hotkey In idle mode, move the Navigation Key as follows to access these functions:• Upward movement : Phone Book• Downward movement : Messaging• Rightward movement : Get It Now• Leftward movement : Mobile WebTURNING THE PHONE ON / OFFlTo search through the menu in numerical order, press down.Phone BookRecent CallsMessagingSettingsToolsUtilitiesCameraMedia GalleryGet It NowMobile Web](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-10.png)
![BASIC FUNCTIONS BASIC FUNCTIONSCH2Pauses are used for automated systems (i.e., voice mail, calling cards).Insert a pause after a phone number then enter another group ofnumbers. The second set of numbers is dialed automatically after thepause. This feature is useful for dialing into systems that require a code.The speaker phone feature lets you hear audio through the speaker andtalk without holding the phone.PAUSE FEATURE1To insert a pause, enter a phone number thenpress [MENU]. Select either a Hard Pause(“P” appears) or a Time Pause (“T” appears).2Press to dial or [SAVE] to store.Please refer to page 30 for more details about storing a phone number.23CH2SPEAKER PHONE1To activate the speaker phone in idle, answeringor calling modes, press and hold .2The phone returns to normal (Speaker phone off)after ending a call or when the phone is turned offand back on.22ANSWERING A CALL1To answer a call, press any key except , ,or .2To end the call, press .In Auto Answer Mode a call is automatically answered after apreset number of ring tones. See page 74 for more details.If one of the people you called hangs up during your call, youand the remaining caller stay connected. If you initiated the calland are the first to hang up, all three callers are disconnected.lBy pressing , you can select either “AnyKey” or “Send Key” to answer a call. lf “Send Key” is selected,the phone can only be answered by pressing . See page 73 for more information.With Three-Way Calling, you can talk to two people at the same time.When using this feature, the normal airtime rates will be applied foreach of the two calls.3 WAY CALL FUNCTION1Enter a number you wish to call and press .2Once you have established the connection,enter the second number you wish to call andpress .3When you’re connected to the second party,press again to begin your three-way call.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-13.png)
![BASIC FUNCTIONS BASIC FUNCTIONSCH2Notifies you of an incoming call when you are already on a call bysounding a beep tone and displaying the caller’s phone number.CALL WAITING FUNCTION1To answer another call while on the phone,press . This places the first call on hold. To switch back to the first caller, pressagain.25CH224Adjust the volume of the ringer, key beep and speaker.ADJUSTING VOLUME1Press [MENU] and select one of the following.2Adjust volume and press [OK] to save it.Mutes key tones and activates the vibration mode to alert you of anincoming call or message.Locks your phone and prevents unauthorized use. Phone can only be used after inputting the password.ETIQUETTE1To turn etiquette mode on/off, press and hold .will be displayed to indicate etiquette mode is active an audible tone sounds when etiquette is turned off.Ringer : Controls the ringer volume.Key Tone : Controls the key pad tone.Voice Call : Controls the earpiece volume.Speaker Phone : Controls the speaker volume.llllMove the Navigation key up or down to adjust volume ofEarpiece during a call.Call Waiting is a system dependent feature. Please contact yourservice provider for details. Lock feature will deactivate when the phone is powered off. Upon next power up, you will need to press to lock phone again.The default password is the last 4 digits of your phone number.LOCK1To lock the phone, press and hold .2To unlock the phone, press , orthen input the password.lIdentifies caller by displaying their phone number. If the caller’s nameand number are already stored in your phone book, they both willappear.CALLER ID FUNCTIONThe caller ID is stored in the call history.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-14.png)
![DURING A CALL DURING A CALLCH2Enables you to send a message (SMS) during a call.To display menu options during a call, press [MENU].MESSAGING1Press [MENU] .Stores a new phone number during a call without the calling partyhearing the key pad tones.SCRATCHPAD1Press [MENU] .Automatically transmits your phone number to a pager during a call.(Dependent on pager service)SEND MY PHONE #1Press [MENU] .27CH226Press [MENU] to deactivate it.Displays the software and hardware version of your phone.PHONE INFO.1Press [MENU] .Increases security during a call.VOICE PRIVACY1Press [MENU] .Enables the network to locate your current location through GlobalPositioning System (GPS). (Refer to page 76 for more details.)LOCATION1Press [MENU] .Displays your phone number.MY PHONE #1Press [MENU] .The caller cannot hear you or any sounds from your side but you canstill hear them.MUTE (UNMUTE)1Press [MENU] .To deactivate, press [MENU] .The phone will automatically un-mute in Emergency Call or Callback mode.lll](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-15.png)
![Enter a name and press [OK]. Please refer to page 31 for more details onentering letters, numbers & symbols. To change the input mode, press [Abc]. Press the navigation key down to select thegroup. Press the navigation key down to selectother options (secret, email).Input mode indicatorT9Word : T9 modeAbc : Abc modeNUM : Number modeSymbols : Symbol modeSTORING A PHONE NUMBERENTERING LETTERS, NUMBERS & SYMBOLSCH3The input mode (Alpha editor) will be automatically activated whennecessary to enter letters and numbers. As shown below, there are4 available modes ; Standard input mode (Abc), T9 input mode(T9Word), Numeric mode (NUM), and Symbol mode (Symbols).The following illustrates the function assigned to each key in theAlpha Editor.31CH.3The phone book stores up to 300 entries.1Enter phone # and press [SAVE].2Choose “New Contact” or “Existing Contact”.Press [OK] to select.The input mode indicator appears on the upper rightof the display when letters and numbers are entered.To select the desired input mode among the 4 modesbelow, press [MODE], then enter letters andnumbers.3The Phone # will appear bellow to a list of icons.The name of the icon is displayed below the list.Use the Navigation key to choose the type of #you’re adding, as indicated by the icon. Press [OK] to select.45To store the entry, press [SAVE]. “New contactadded!” or “Contact edited!” will be displayed.30ModeNextSpaceCaps LockClearSavePress to change mode.[T9Word][Abc][NUM][Symbols]Press to view the next matching word ifthe highlighted word is not the word youintended.Press to accept a word and add a space.Press to select a letter case of thestandard text input or T9 text input mode.[Abc], [ABC], and [abc] indicate thestandard text input.[T9Word], [T9WORD], and [T9word]indicate the predictive text input.Press to delete a character to the left ofthe cursor.Store the letters and numbers you enter.KEY FUNCTION](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-17.png)
![ENTERING LETTERS, NUMBERS & SYMBOLS ENTERING LETTERS, NUMBERS & SYMBOLSCH3The T9 input mode incorporates a built-in-dictionary to determine aword based on the entered characters. A word can be entered morequickly by pressing a key once per character.T9 INPUT MODE1Select the T9Word mode by pressing [Abc].2Press a digit key once to enter the characteryou want and enter all the characters to inputthe word you want.3To view the next matching word, press .To enter a compound word.lEnter the first part of the word and press to accept it.lEnter the last part of the word and press to enter the word.Select Abc mode, by pressing [Abc].When you select this mode, the Abc icon appears as a visualconfirmation.- Find the key that corresponds to the letter you want to enter.- Press it as many times as needed for the letter to appear on thescreen.- To enter the name “John”:Press [ ] JPress [ ] oPress [ ] hPress [ ] n33CH3Use the digit keys to enter letters, numbers and characters.STANDARD INPUT MODE1Enter letters using the key pad as follows:2To enter a space, press . The cursor willautomatically move to the next column.3Repeat until letters are entered. There is a 16-letter limit.4To delete one digit, press . To delete theentire entry, press and hold .To change the input mode, press [Abc].32Key Pad12ABC3DEF4GHI:9WXYZ1ADG:W.BEH:X@CFI:Y-234:Z’ADG:91 TimeRepetitions2 timesRepetitions3 timesRepetitions4 timesRepetitions5 times4To accept matching word and enter a space,press .5To change from lowercase to uppercase, press .To enter “ ” in the T9 input mode.- Press [Abc] to select the T9 input mode and to choose thesmall letter case (T9Word).- Press and you will see “Fun” highlighted. Press to select it.- Press and you will see “ease” highlighted. Press to select the next matching word, you will see “fare” and enter a space.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-18.png)
![ENTERING LETTERS, NUMBERS & SYMBOLS MAKING A CALL THROUGH THE PHONE BOOKCH3NUMERIC MODE1Press [Abc] until the “Symbols (Symbol mode)” appears.35CH3341Press [Abc] until the current input modechanges to the “NUM (Numeric mode)”. 2To enter a number, press a digit key.Press [ ],orPress [ ],2Select symbol you want to enter with theNavigation key.lUse the Navigation key to view a different line of symbols.SYMBOL MODEAllows you to enter numbers.Allows you to enter symbols.Ideal for frequently dialed numbers, this feature allows phone bookentries to be dialed via the keypad with only one or two key presses.ONE-TOUCH/TWO-TOUCH DIALING1-9 : Press the corresponding memory number and hold for more than 1 second.ONE-TOUCH DIALING:10-20 : Press the first digit and second digits of the memory number short and long respectively.TWO-TOUCH DIALING:lIf no phone number is stored in the location entered,“There is no number” will appear on the screen.lIf a phone number is stored in secret, you must enter thepassword to make a call.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-19.png)
![CH439CH438Stores up to 300 entries, each of which can be assigned to a group.Entries can be retrieved by name, phone number or group.Retrieves an entry by name and number, and calls by simply pressing . You can review all the entries stored in your phonebook list or find an entry quickly by using enter a name or itscharacter string. FINDPHONE BOOK PHONE BOOK12345Press [MENU] .Enter a name or its character string or scrollthrough the list with the Navigation Key. Please refer to page 31 for more details onentering letters, numbers & symbols.Please refer to page 101 or page 102 for moredetails on “New Text Msg” & “New Pix Msg”.The list of names in your phone book isdisplayed alphabetically.All matching entries will be displayed. Highlight an entry. Press [OK] to edit the entry. Press [MENU] to 1. Send Text Msg, 2. SendPix Msg, 3. Prefix or 4. Erase.To call the selected number, press .If the entry is set to secret, you will be asked for your password.l12To add a new entry to the phone book, press [MENU] .Adds a new entry.ADD NEWTo enter a name or number, use the NavigationKey to select the phone book field.Please refer to page 31 for more details on enteringletters, numbers & symbols.33.1 To save the entry, press [SAVE]. 3.2 To return to the previous page, press [CLR].PHONE BOOK FIELD :Name/Group/Mobile/Home/Office/Pager/Fax/E-Mail/Wireless Addr./Ringer/Msg.Ringer/Graphic/Memo/Set Secret.lGROUPAllows you to classify phone entries into groups. Existing groupsinclude Personal, Business, Etc. and All. A maximum of seven groupsis allowed.13To add a new group, press [MENU] .A maximum of seven groups is allowed.ADD NEW GROUPInput a new group name.4Press [OK] to save it.2Press [MENU] to select “Add Group”.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-21.png)
![CH4CH440PHONE BOOK PHONE BOOK41CHANGE GROUP NAME2Select an existing group name that you haveadded with the navigation key.4Input a new group name.5Press [OK] to save it.3Press [MENU] to select “Rename”.ERASE GROUP1Use the Navigation Key to select, then deletethe group. 2Press [ERASE] to delete it.3Press [OK] to erase it.The default group names (All, Personal, Business, Etc.) cannotbe changed.lThe default group names (All, Personal, Business, Etc.) cannot be erased.lWhen executing erase group, the saved entries are moved to the Etc. group.1Press [MENU] . In idle mode, calls can be placed to numbers stored in speed dial bypressing & holding the location number on the key pad. For a 2-digitlocation number, press the first number, then press and hold thesecond number.SPEED DIAL1Press [MENU] .2To assign a phone number to a location, selectthe location and press [SET].3Select the entry with the Navigation key andpress [OK].If a phone number is already assigned to the location, press [ERASE] and [OK] to delete.lIf the entry is set to secret, you will be asked for your password.l4“Speed dial # X edited” will be displayed.• “Unassigned” appears if the location is available.• If a phone number is set as Secret, you will have to enter the password.• To call an assigned number, press & hold the last digit of the speed dial #.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-22.png)
![CH443CH442PHONE BOOK PHONE BOOKMSG. GROUPAllows the user to group up to 10 phone number. The user can add,change, and delete Msg.Group.13To add a new group, press [MENU] .A maximum of five groups is allowed.ADD NEW MSG. GROUPInput a new group name.4Press [OK] to save it.2Press [MENU] to select “Add Group”.CHANGE MSG. GROUP NAME2Select an existing group name with theNavigation Key.4Input a new group name.5Press [OK] to save it.3Press [MENU] to select “Rename”.1Press [MENU] .1Press [MENU] .SEND TEXT MSG. GROUP2Select an existing group name with theNavigation Key.4Input a “Message”, “Default CB#”, “Priority”,and “Insert Signature”.53Press [MENU] to select “Send Text Msg.”.5.1. To send the text message, press [MENU] and select the “Send” then press [OK].5.2. To save the text message, press [MENU] and select the “Save to Outbox” then press [OK].Please refer to page 101 for more details on “New Text Msg”.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-23.png)
![CH445CH444PHONE BOOK RECENT CALLSTo display your phone number and service provider:MY PHONE #1Press [MENU] .2To return to the previous page, press [OK].Call details include type of call, date, time and phone number.After the 20 received, dialed or missed call, the oldest call willautomatically be erased from the history.Displays information about the most recent incoming, outgoing andmissed calls.In idle mode, you can access recent calls by pressing [MENU] .ALL CALLS1To see a list of the 20 most recent incoming,outgoing and missed calls, press [MENU] . If the number is already stored in your phone book,only the name appears. If the number is not stored,only the phone number appears.23To view details, press [OK].ERASE GROUP1Select an existing group name with theNavigation key.2Press [ERASE] to delete it.3Press [OK] to erase it.Save: To store the phone number in your phone book.Prefix: The user may add the desired number before the number.It is useful when you add “1” during long distance call.You may save it in the phone book after Prefix.Send Text Msg: To send a text message the phone number.Send Photo Msg: To send a photo message the phone number.Erase All: To erase all recent calls list.lllllPress [MENU] select “SAVE” to save it orpress [ERASE] to delete it.SEND PIX MSG. GROUP1Select an existing group name with theNavigation Key.4To send the picture message, press [MENU] and select the “Send” then press [OK].Please refer to page 102 for more details on “New Pix Msg”.3Input a “Message”, “Subject”, “CC” and “BCC”.2Press [MENU] to select “Send Pix Msg.”.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-24.png)
![CH447CH446RECENT CALLS RECENT CALLSDisplays information about the 20 most recently missed calls. Place a call to a missed call number by simply pressing . To see a list of the 20 most recently missed calls, press [MENU] . If the numberis already stored in your phone book, only thename appears. If the number is not stored,only the phone number appears.MISSED CALLS12To view missed call details, press [OK].Call details include date, time and phone number.After 20 missed calls, the oldest call will automatically be erased from the history.Call details include date, time and phone number.After 20 received calls, the oldest call will automatically be erased from the history.Displays information about the 20 most recently answered calls. Place a call to a received call by simply pressing .RECEIVED CALLS1To see a list of the 20 most recently answeredcalls, press [MENU] . If the numberis already stored in your phone book, only thename appears. If the number is not stored, onlythe phone number appears.2To view incoming call details, press [OK].3Save: To store the phone number in your phone book.Prefix: The user may add the desired number before the number.It is useful when you add “1” during long distance call.You may save it in the phone book after Prefix.Send Text Msg: To send a text message the phone number.Send Photo Msg: To send a photo message the phone number.Erase All: To erase all missed calls list.lllllPress [MENU] select “SAVE” to save it orpress [ERASE] to delete it.3Save: To store the phone number in your phone book.Prefix: The user may add the desired number before the number.It is useful when you add “1” during long distance call.You may save it in the phone book after Prefix.Send Text Msg: To send a text message the phone number.Send Photo Msg: To send a photo message the phone number.Erase All: To erase all received calls list.lllllPress [MENU] select “SAVE” to save it orpress [ERASE] to delete it.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-25.png)
![CH44948CH4RECENT CALLSRECENT CALLSCall details include type of call, date, time and phone number.After 20 dialed calls, the oldest call will automatically be erased from the history.Displays information about the 20 most recently dialed numbers.Place a call to a dialed call by simply pressing .DIALED CALLS1To see a list of the 20 most recently dialednumbers, press [MENU] . If the number is already stored in your phonebook, only the name appears. If the number isnot stored, only the phone number appears.2To view dialed call details, press [OK].Checks the talk time and manages your calls within the limit you set.The five timers include:Displays talk time of last call.CALL TIMERS1Press [MENU] .2To return to the previous page, press [OK].LAST CALLDisplays talk time of all calls made within Home area.HOME CALLS1Press [MENU] .2To view the time of the following items:3To reset the timer, press [RESET]. To return to the previous page, press [OK].Voice CallData/Fax CallDisplays talk time of all incoming and outgoing calls, excluding webaccess calls.ALL CALLS1Press [MENU] .2To view the time of the following items:3To return to the previous page, press [OK].Voice CallData/Fax Callllll3Save: To store the phone number in your phone book.Prefix: The user may add the desired number before the number.It is useful when you add “1” during long distance call.You may save it in the phone book after Prefix.Send Text Msg: To send a text message the phone number.Send Photo Msg: To send a photo message the phone number.Erase All: To erase all dialed calls list.lllllPress [MENU] select “SAVE” to save it orpress [ERASE] to delete it.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-26.png)
![CH451CH450RECENT CALLS50RECENT CALLSDisplays talk time of all incoming and outgoing calls, excluding webaccess calls.12To view the time of the following items:Press [MENU] .CUMULATIVE CALLS3To reset the timer, press [RESET]. To return to the previous page, press [OK].Voice CallData/Fax CallDisplays talk time of roaming calls.ROAM CALLS1Press [MENU] .2To view the time of the following items:3To reset the timer, press [RESET]. To return to the previous page, press [OK].Voice CallData/Fax CallllllChecks the log of all kilobyte data transmissions.To show the received kilobyte usage on a user definable interval.To show the transmitted kilobyte usage on a user definable interval.To show the received or transmitted kilobyte usage on a user definableinterval.1X PACKET COUNTER1Press [MENU] .2RECEIVEDTo reset the counter, press [RESET]. To return to the previous page, press [OK].TRANSMITTED1Press [MENU] .2To reset the counter, press [RESET]. To return to the previous page, press [OK].TOTAL1Press [MENU] .2To return to the previous page, press [OK].](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-27.png)
![CH453CH452GET IT NOW52GET IT NOWTo select an option, press then press .When a prompt appears, press to proceed or to cancel.Your phone provides a unique feature -Get It Now- that enables youto download melody ringers, wallpapers, games and more from yournetwork to your phone. Please contact your service provider for theavailability of these services.START GET IT NOW1To launch “Get It Now ” from the standbymode, press [MENU] or . 2When three or more icons appear on the screen,select an application with Navigation key.4To end the application, press .The phone will return to the standby mode.3To start the application, press .DOWNLOADING APPLICATIONS1Press [MENU] or . 2Select “Get It Now ” with Navigation key andpress .4The phone will access your service provider’sserver.Follow the prompt to download applications.3Select “Start” with Navigation key and press .Before downloading melody ringers and wallpapers, you need todownload the dedicated downloader.Please contact your service provider for details.DOWNLOADING MELODIES/WALLPAPERSllDownloaded melody ringers apply to several functions including theincoming call alert, new text message alert, alarm clock andscheduler alarm.Downloaded wallpapers apply to the standby mode.Downloaded melody ringers, wallpapers and applications are savedto the data folder in your phone.APPLYING MELODIES/WALLPAPERSCHECKING DATA FOLDER MEMORY1Press [MENU] or . 2Select “Get It Now ” with Navigation key andpress .4Select “Information” with Navigation key andpress . The memory status will be displayed.3Select “Options” with Navigation key and press .5To exit, press .ERASING AN APPLICATION1Press [MENU] or . 2Select “Get It Now ” with Navigation key andpress .4Select the application to be erased withNavigation key and press .3Select “Options” with Navigation key and press .5Select “Remove” then press .](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-28.png)
![You can use your phone to browse the Internet if you have obtainedphone Internet service from your service provider and if over-the airInternet access is available in your area. This menu shows the list of download still image.This menu shows the list of downloaded/add as to image.1Press [MENU] or . 2Follow the procedures for “Chapter 7 WEBBROWSING” on page 119.CONNECT WEBCH455CH454MOBILE WEB54MEDIA GALLERYIMAGES1Press [MENU] .GRAPHICS1Press [MENU] .ANIMATIONS2Scroll through the captured pictures to display thepicture you want to send and press [SEND].3To write your picture message, see “New PixMsg” on page 102.44.1 To send the pix message, press [MENU] then select “Send” and press [OK].4.2 To save the pix message, press [MENU] then select “Save to Outbox” andpress [OK].44.1 To send the pix message, press [MENU] then select “Send” and press [OK].4.2 To save the pix message, press [MENU] then select “Save to Outbox” andpress [OK].2Scroll through the captured pictures to display thepicture you want to send and press [SEND].3To write your picture message, see “New PixMsg” on page 102.Press [MENU] to select 1.Erase, 2.Erase All, 3.Change Title.Press [MENU] to select 1.Erase, 2.Erase All, 3.Change Title.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-29.png)
![CH457CH456MEDIA GALLERY56SETTINGS1Press [MENU] .PIX1Press [MENU] .TONES2Scroll through the captured pictures to display thepicture you want to send and press [SEND].3To write your picture message, see “New PixMsg” on page 102.42Scroll to the saved voice memo you want to sendthen press [SEND].3To write your picture message, see “New PixMsg” on page 102.4Press [MENU] to select 1.Erase, 2.Erase All, 3.Change Title.Sets Ringer Type, Volume, Alert, Roam Ringer, Tone Length andEtiquette.This menu shows the list of photos that have been taken with thecamera.This menu shows the list of downloaded ringtones.To select a ringer type for incoming calls:To select a ringer type for receiving messages:To select a ringer type for receiving voice mail:Customizes your phone and optimizes performance through a varietyof settings.SOUNDSRINGER TYPE1Press [MENU] .2Select your desired ringer type.3Select one of the available ring types.To confirm, press [SELECT].RINGER2Press the Navigation key up or down to select “Tone 1, 2, 3, 4, 5”.3To confirm, press [SELECT].2Press the Navigation key up or down to select “Tone 1, 2, 3, 4, 5”.3To confirm, press [SELECT].1Press [MENU] .MESSAGES1Press [MENU] .VOICE MAILLeft or Right key : Select “Ring Tones”, “Music Bells” or “Downloads.”Up or Down key : Select “Ringer.”Downloads : Downloaded ringer types and familiar music.4.1 To send the pix message, press [MENU] then select “Send” and press [OK].4.2 To save the pix message, press [MENU] then select “Save to Outbox” andpress [OK].4.1 To send the pix message, press [MENU] then select “Send” and press [OK].4.2 To save the pix message, press [MENU] then select “Save to Outbox” andpress [OK].](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-30.png)
![SETTINGS SETTINGSCH459CH458Controls the Ringer, Key tone, Voice Call and Speaker Phone volume.VOLUMERINGER1Press [MENU] .2Select one of the following options bypressing the Navigation key to the right.3To confirm, press [OK].1Press [MENU] .Silent : Mute the ringer, press (Min).Ringer OffVibrate OnRinger Mode : Up & Down (Level 1~5)High & Vib : The ringer sounds after vibration, press (Max).To adjust key pad tone:Controls the Ringer volume and alerts you to incoming calls in themodes listed in the gray box below.KEY TONE2Adjust the key pad tone with the Navigation key.3To save, press [OK].1Press [MENU] .To adjust earpiece volume:VOICE CALL2Adjust the earpiece volume with theNavigation key.3To save, press [OK].Level 1 - 5 (Min- , Max- )Off (Min- )Level 1 - 5 (level 5, Max- )When set, this setting alerts you to the following handset changes:Sounds an alert every minute during a call.ALERTMINUTE2Select “Off” or “On” with the Navigation key andpress [OK] to save it.1Press [MENU] .Sounds an alert when leaving a service area and entering a roamingservice area.ROAM2Select “Off” or “On” with the Navigation key andpress [OK] to save it.1Press [MENU] .Notifies you that a call has been successfully placed.CONNECT2Select “Off” or “On” with the Navigation key andpress [OK] to save it.1Press [MENU] .1Press [MENU] .To adjust speaker phone volume:SPEAKER PHONE2Adjusts the speaker phone volume using thenavigation key.3To save, press [OK].Level 1 - 5 (Min- , Max- )](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-31.png)
![SETTINGS SETTINGSCH461CH460Sounds an alert when entering an area where calls cannot be madedue to weak signal strength.FADE2Select “Off” or “On” with the Navigation key andpress [OK] to save it.1Press [MENU] .Sounds a different ringer when you are in a roaming service area.ROAM RINGER1Press [MENU] .2Select “Distinctive” or “Normal” with theNavigation key and press [OK] to save it.Normal : Sounds the same ringer type as used in Home area.Distinctive : Sounds a different ringer type.llOn : Etiquette Mode on.Off : Etiquette Mode off.llTo adjust tone length:To place the phone in Etiquette Mode so all phone sounds are muted:TONE LENGTH1Press [MENU] .2Select “Normal” or “Long” with the Navigationkey and press [OK] to save it.ETIQUETTE1Press [MENU] .2Select “On” or “Off” with the Navigation key.and press [OK] to save it.Allows you to activate/deactivate the power on/off tones.ON/OFF TONES2Select “Off” or “On” with the Navigation key andpress [OK] to save it.1Press [MENU] .](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-32.png)
![SETTINGS SETTINGSCH463CH462Allows you to customize display.To select a display menu style:DISPLAYMENU STYLEWALLPAPER1Press [MENU] .2Select “Fold”, “Grid” or “List” with theNavigation key and press [OK] to save it.1Press [MENU] .To select an LCD display:GRAPHICS2Select Default to choose a pre-installed display,Downloads or Pix # to choose a display youhave downloaded to your phone.3Select a display from the Animation and theGraphic list using the navigation key and press [SELECT] to save it.2Select Default to choose a pre-installed display,Downloads to choose a display you havedownloaded to your phone.3Select a display from the Animation and theGraphic list using the navigation key and press [SELECT] to save it.1Press [MENU] .POWER ON1Press [MENU] .RECEIVED1Press [MENU] .DIALED2Select “Default” with the Navigation key.3Select a display from the Animation list using the navigation key and press [SELECT] tosave it.1Press [MENU] .POWER OFF2Select Default to choose a pre-installed display,Downloads to choose a display you havedownloaded to your phone.3Select a display from the Animation and theGraphic list using the navigation key and press [SELECT] to save it.2Select Default to choose a pre-installed display,Downloads or Pix # to choose a display youhave downloaded to your phone.3Select a display from the Animation list using the navigation key and press [SELECT] tosave it.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-33.png)
![CH465SETTINGSCH464SETTINGS1Press [MENU] .SCREEN SAVER2Select “Time Setting” or “Screen Saver” withthe Navigation key.3To save, press [SELECT].Time Setting : Off, 5 Secs, 10 Secs, 20 Secs, 30 Secs.Screen Saver : Select picture image.(Pix/Multimedia/Images).By pressing [MENU], the user can choose from the following:1. Erase: To erase pictures saved in the current album. 2. Erase All: To erase all pictures saved in the current album.3. Change Title: To edit the title of a picture file.llSet the time of Screen Saver and select the images, then the Imagewill be displayed on LCD.To adjust the display contrast:CONTRAST1Press [MENU] .MAIN LCD/SUB LCDTo save, press [OK].23Select “Main LCD” or “Sub LCD” and select oneof the following options with the Navigation key.Main LCD : Level 1~5.Sub LCD : Level 1~5.llTo input a personal greeting:GREETING MESSAGE1Press [MENU] .2The msg field will be highlighted. Press theNavi.Key left or right to choose between on andoff. Press the Navi.Key left or right to choose afont. Press the Navi.Key down to move to thenext field, color. Press the Navi.Key down tomove to the next field, font. Press the Navi.Keyleft or right to choose a color. Repeat for bothfield. Press the Navi.Key down to entry message.Enter your greeting.To save, press [SAVE].3Msg : On/Off.Font : White, Blue, Dark blue, Magenta, Gray, Black.Bg : Transparent, White, Blue, Yellow, Gray, Black.Entry Message : Enter message (Default-VERIZON).llll](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-34.png)
![CH467SETTINGSCH466SETTINGSBacklights the display, key pad and dimming for easy viewing in darkplaces.BACKLIGHT3To save, press [OK].1Press [MENU] .LCD/KEY PAD/DIMMING2Select “LCD”, “Key Pad” or “Dimming” andselect one of the following options with theNavigation key.LCD : 5 Secs/15 Secs/30 Secs/60 Secs/Always On.Key Pad : 5 Secs/15 Secs/30 Secs/60 Secs/Always On/Always Off.Dimming : On/Off.lllDATA SVC.2Select one of the following connection modeswith the Navigation key.3Press [OK] to save.Voice Call : To receive a voice call.Data Only : To receive data when connected to PC.llThis function is available only when the phone is connectedto data cable.CONNECTION1Press [MENU] .Choose the connection mode for the usage of your phone.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-35.png)
![CH469SETTINGSCH468SETTINGSPrevents unauthorized use of your phone. The following settings canbe restricted:SECURITYPrevents the phone from being used without entering the passwordfirst.1Press [MENU] and enter “Password”.PHONE LOCK3To save, press [OK].2Press and select “Lock Now”, “Lock OnPower Up” or “Unlock”.Lock Now : Lock the phone now.Lock On Power Up : Not locked, but it is automaticallylocked when power is recycled.Unlock : Do not lock the phone.lllThe default password is the last 4 digits of your phone number.RESTRICTBlocks all dialed calls – except emergency calls – but allows anincoming call to be placed.When you attempt to make a restricted call, “This phone is restricted”appears on the screen.1Press [MENU] and enter “Password”.2Press and select “Allow” or “Restrict”with the Navigation key.3To save, press [OK].DIALEDAllow : Allows a dialed call.Restrict : Restricts a dialed call.ll1Press [MENU] and enter “Password”.2Press and select “Allow” or “Restrict”with the Navigation key.3To save, press [OK].Allow : Allows an recent call.Restrict : Restricts an recent call.llRECENT CALLSBlocks access to Recent Call List.1Press [MENU] and enter “Password”.2Press and select “Allow” or “Restrict”with the Navigation key.Restricts access to camera mode.3To save, press [OK].CAMERAAllow : Allows access to the camera.Restrict : Restricts access to the camera. ll1Press [MENU] and enter “Password”.2Press and select “Allow” or “Restrict”with the Navigation key.Restrict a data call from being placed.3To save, press [OK].DATA CALLAllow : Allows a data call.Restrict : Restricts a data call.ll](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-36.png)
![CH471SETTINGSCH470SETTINGSRestricts calling 900 dial service numbers.3To save, press [OK].900#SAllow : Allows calls to a 900-dial service.Restrict : Restricts calls to a 900-dial service.ll1Press [MENU] and enter “Password”.2Press and select “Allow” or “Restrict”with the Navigation key.Restricts calling long distance numbers – the phone is limited tocalling numbers within the area.3To save, press [OK].LONG DISTANCEAllow : Allow a long distance call.Restrict : Restrict a long distance call.ll1Press [MENU] and enter “Password”.2Press and select “Allow” or “Restrict”with the Navigation key.Changes your 4-digit passwordCHANGE CODE2Press .3Enter a new password and press [OK]. 4Enter the new password again and press [OK].1Press [MENU] and enter “Password”.Stores 3 phone numbers that can be called even in the lock mode.2Press and select a location with theNavigation key.3Press [SET] and input a phone number,press [OK] again to save.SPECIAL #’S1Press [MENU] and enter “Password”.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-37.png)
![CH473SETTINGSCH472SETTINGS1Press [MENU] and enter “Password”.Clears all phone book, downloads, and photo gallery entries the boxfor between chek and phonebook.2Press .ERASE ALL3Press to check “Phonebook”, “Downloads”or “Pix Gallery” and press [OK] to erase allthe items in those categories.Resets phone to default settings.RESET PHONE3Select “Yes” or “No” with the Navigation key.Press [OK].When you select "Yes" and [OK], you will see "Phone willrestore default settings and power-cycle" on the display.1Press [MENU] and enter “Password”.2Press .4To reset the phone, press [OK].OTHERS1Press [MENU] .2Select “Any Key” or “Send Key” with theNavigation key.3To save, press [OK].ANSWER OPTIONSAny Key : Press any key to answer an incoming call except , , and .Send Key : Press only to answer a call.llTo select an answer mode:CALL ANSWERTo select active flip answer mode.1Press [MENU] .2Select “On” or “Off” with the Navigation key.3To save, press [OK].ACTIVE FLIPWhen Active Flip On is selected, an incoming phone call canbe answered simply by opening the phone.When Active Flip Off is selected, you will need to open thephone and follow the Answer mode you have selected.ll](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-38.png)
![CH475SETTINGSCH474SETTINGSPress [MENU] .Automatically answers a call after a preset amount of time. Auto Answer only works when the phone is open.12Select one of the following with the Navigation key.3To save, press [OK].AUTO ANSWEROff/5 Secs/10 Secs/18 Secs.lThis function will not be active when you select Vibrate, Silent,Etiquette or Ringer after Vib as a ringer mode.1Press [MENU] .Automatically redials a call up to 5 times after a set time interval.23Retry time to field is shown. Press the Navi.Keyleft or right to choose the amount of time off,3secs, 5secs, 7secs and 10secs.When a time is chosen for retry time, the repeatfield is shown. Press the Navi.Key down tohighlight the repeat field. Press the Navi.Key leftor right to choose the amount of repeats. (1 time, 3 times or 5 times).4To save, press [OK].AUTO RETRY1Press [MENU] .2Select either “English” or “Spanish” with theNavigation key.3To save, press [OK].LANGUAGESelects the language in which letters are displayed on screen.3To save, press [OK].“Enhanced” : Makes it more difficult to wire tap.lEnhances voice privacy and avoids tapping during a call.1Press [MENU] .2Select “Standard” or “Enhanced” with theNavigation key.VOICE PRIVACY](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-39.png)
![SETTINGS SETTINGSCH477CH4763To save, press [OK].To determine whether or not the network system can detect yourposition:1Press [MENU] .2Select “911 Only” or “Location On” with theNavigation key.LOCATION911 Only : Your location will be hidden from network & application except 911.Location On : Your location is now available to the network.llYour phone is able to operate with a TTY (Teletypewriter) device inboth analog and digital modes. This feature is system dependent andmay not be available in all areas.1Press [MENU] .2Select one of the following options (TTY Off /TTY+TALK / TTY+HEAR / TTY Full) with theNavigation key and press [OK].TTY MODESelects the Preferred System.SYSTEMPress [MENU] .Select one of the following options (Automatic B/Automatic A /Home only) with the Navigationkey and press [OK].Automatic B : Scan the radio channels based on theAutomatic B setting.Automatic A : Scan the radio channels based on theAutomatic A setting.Home only : Only within your home area or home affiliatedarea.SET MODE12lll](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-40.png)
![SETTINGS SETTINGSCH479CH47812Press [MENU] .Select “Yes” or “No” then, press [OK] tosave it.Enables Auto NAM (Number Assignment Modules) or manually selects a NAM.Automatically switches phone to proper NAM when you have multipleNAM registrations.AUTO NAM12Press [MENU] .Select “NAM1-VERIZON” or “NAM2-VERIZON”then press [OK] to save it.Changes the NAM used by the phone when you have multipleregistrations.CHANGE NAMNAM SETTINGDisplays the phone’s PRL (Preferred Roaming List).12Press [MENU] .To return to the previous page, press [OK].PRL IDDisplays the version of your phone:PHONE INFO.1Press [MENU] .2The software version appears.3Press [OK].S/W VERSION1Press [MENU] .2The hardware version appears.3Press [OK].H/W VERSION1Press [MENU] .2The “Get It Now” software version appears.3Press [OK].GET IT NOW VERSION](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-41.png)
![CH481UTILITIESCH480UTILITIESEVENT1Press [MENU] .ADD NEW PLANSets an event and reminds you of that event.23Move the Navigation key left, right, up or down tochoose a date in the calendar and press [OK].Use the keypad to change or enter the datethen press [OK]. Default : To set default ringer type.Change : Choose a ringer type from the list.DATE SETTINGUse the keypad to set a time and to select“AM” or “PM” then press [OK]. TIME SETTINGSelect an alert time interval option (On Time, 10 MinBefore, 30 Min Before, 1 Hour Before, No Alarm) bypressing the navigation key left or right. SETTINGTo set a Ringer, press [MENU], then select“Default” or “Change” using the Navigation key. To save it press [SELECT].RINGER SETTINGUse the keypad to input a plan message then press [OK]. PLAN SETTINGThe date field is highlighted. Press the navigationkey down to set the alarm options.You can set up to 3 alarms.ALARMTo display alarm entries, press [MENU] .11To view the Event List, press [MENU] .VIEW PLAN2Move the Navigation key to choose an eventand press [OK] or [ERASE]. Press [MENU], then select “Erase All” usingthe Navigation key, “Erase all plans?” Willhappen. Press [OK] to delete.4Press [SAVE] to save it or [CLR] toreturn to the calendar.5The date of the event will be marked on yourcalendar.Select one of the entries using the navigation key. To set a new alarm, choose alarm 1, 2 or 3.To edit an existing alarm, select that alarm. Press [OK].2The setting field will be highlighted. Press thenavigation key down to select alarm options.3Use the Navigation key to select a setting for thealarm (Once, Daily, Weekly, Monthly, Off). SETTING](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-42.png)
![CH483UTILITIESCH482UTILITIESTo save an alarm setting press [SAVE].4Default : To set default ringer type.Change : To set custom to choose a ringer type from the list.Once: To enter the date filed.Daily: Don’t editing filedWeekly: To select “Monday”, “Tuesday”, “Wednesday”, “Thursday”, Friday”, “Saturday”, “Sunday”.Monthly: To select 1~31.OffTo set a “Ringer” press [MENU], then select“Default” or “Change” using the Navigation key. To save it press [SELECT] to save it.RINGER SETTINGUse the Navigation key to select a Snooze setting(Off, 1 time after 5 min, 1 time after 10 min, 3 timesby 5 min). SNOOZE SETTINGUsing the keypad, input an alarm message thenpress [OK]. PLAN SETTINGYour phone includes an internal memo pad that can be used tocompose and store reminders and notes.MEMO PAD1Press [MENU] .ADD MEMO2Input a new text memo.(Please refer to page 31 for more details on enteringletters, numbers & symbols.)11.1. Press [MENU] .VIEW MEMO2The list of all memos, in saved order, is displayed.Select a memo and press [OK].3The selected memo will appear. To edit it, press [MENU], select “Edit” and input a newtext memo, then press [OK] to save edit memo.1Press [MENU] .SETTINGS2Select (Paper/Pattern/Sea/Sky/Flower) by pressingnavigation key left or right and press [OK].To compose a memo (there is an 80-letter limit):To view a saved memo:To select memo pad background image:1.2. To erase a memo, press [ERASE].1.3. To add a new memo, press [MENU] “New Memo”.1.4. To erase all memos, press [MENU] “Erase All”.3Press [OK] to save memo.Use the keypad to set a time for the event and the to select “AM” or “PM” then press [OK]. TIME SETTINGUse the keypad to change or enter the date for thealarm then press [OK]. If weekly is chosen for setting, date field becomesa day if the week field. DATE SETTING](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-43.png)
![CH485UTILITIESCH484UTILITIES1Press [MENU] .2Follow the instructions below to calculate(8*6)/4-2.53To reset, press [RESET].1Press [MENU] .To access the calculator:CALCULATORTo display the time and date in pre-programmed cities:WORLD CLOCKInput 8.Move the Navigation key rightward.Input 6 and press the Navigation key.Move it leftward.Input 4 and press the Navigation key.Move it downward.Input 2 and press the to input (.). Press 5, .: X, : -, : /, : +, : ., : Reset, : =.24Select a city with the Navigation key.3The world map appears with the city, its dateand time.Use the Navigation key to select another city.As the daylight saving time is not applied, it may be different fromthe actual time during DST.1Press [MENU] .23Simultaneously times up to six different events. To operate thestop watch:STOP WATCHTo measure a time period.1. To start the stop watch, press [START].2. To pause it, press [STOP].3. To resume it or [RESET] to return to the previous page, press [EXIT].To time up to six events at once:1. To start, press [START].2. To stop a time period and continue measuring another one, press [CONT].3. To stop the second and continue measuring a third one, press [CONT].4. To measure up to six time periods, repeat theabove steps.5. To stop the stop watch, press [STOP].6. To review the results, press [VIEW].7. To return to the stop watch, press [OK].8. To reset it, press [RESET].To return to the previous page, press [OK].](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-44.png)
![86CAMERACH4CH487CAMERATaking pictures with your phone’s built-in camera is as simple aschoosing a subject, pointing the lens, and pressing a button. You canactivate the Camera Mode and take pictures when the phone is open.TAKE PIXPress [MENU] , or press the sidecamera button.Point the camera lens at your subject.You can check the picture framing through the main display screen.Press [OK], or the side camera button totake the picture.TAKING A PICTURE THROUGH THE MENUPress the Side Camera button to activateCamera Mode.Point the camera lens at your subject. You can check the picture framing through themain display screen.Press the side camera button to take the picture.TAKING A PICTURE IN IDLE MODE1234123To save the picture, press [SAVE] then input apicture title and press [OK]. To go back toidle mode without saving the picture, press .To send the picture to someone, press [OK].4CAMERA MODE OPTIONSWhen the phone is open and in Camera Mode, several user optionsare available.Press [GALLERY] to enter Review Mode. From there you can view thecaptured pictures, view a running count of stored pictures and more.GALLERYPress the navigation key up or down to adjust the picture size from High (640x480 pixels) to Med (320x240 pixels) to Low (160x120 pixels).The current picture size appears at the bottom of the display screen.RESOLUTIONPress the navigation key left or right to change the magnification. (Zoom to 1x, 2x or 4x magnification.)ZOOMThe sub LCD will show a representation of the picture to be taken. Use thesub LCD to help frame yourself for a self portrait.SUB LCDUNDER [MENU]To activate the camera’s timer function. (Off / 5 Secs / 10 Secs)SELF TIMERTo select your favorite fun picture frame to decorate your picture. (Off / AngelHeart / Birthday / Bohemian / Bubble Bath / Celebration / Circular Eyes /Coffee / Cupid / Enamored / Enlargement / Female / Flower Frame / FlowerMirror / Frog / Funny Lips / Gentleman / Gift / Ice Cream / Koala / LoveFrame / Love Heart / Love Tree / Magic Santa clause / Male / My Christmas /Noon Window / Postage Stamp / Princess Frame / Red Man / Rose Grove /Santa clause / Seashore / Sexy Lips / Sexy Woman / Sunflower / Sunglasses/ Tree Frame / White Christmas / White Window / Winter Frame)ADD FRAMESTo select an option from the following. (Brightness / Image Effect /Contrast / Quality)IMAGE CONTROLSTo select a shutter sound. (Off / Shutter 1 / Shutter 2 / Shutter 3 / Say “Cheese”)SHUTTER SOUNDTo activate the flash function. (Off / On this shot / Always On)FLASHThe picture is automatically saved. Press [MENU] (1.Edit title, 2.Wall paper,3.Screen saver, 4.Pix caller ID, 5.Take new picture,6.Thumbnail, 7.Erase) to send the picture tosomeone, press [SEND].You cannot place or receive calls while in Camera Mode. All incoming voice calls will be forwarded to voicemail.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-45.png)
![CH489CAMERACH488CAMERAPIX GALLERY1Press [MENU] .PIX MESSAGEYour phone enters Review Mode after taking a picture.Once you’ve taken a picture, you can use the messaging capabilities ofyour phone to instantly share it with family and friends. To send a pictureto a recipient’s email address or to their wireless phone:In Review Mode you can view all the pictures you havetaken,store selected images in your phone, send pictures tothe Online Album, delete images and access additional pictureoptions.Press [MENU] to display the following options :1. Thumbnail : To switch the display from full-screen to thumbnail view.2. Edit Title : Edit the picture’s title.3. Send Pix Msg : Upload the picture to a message.4. Assign Pix : Assigns the selected pix to display for specific tasks (Wallpaper/Screen Saver/Pix Caller ID/Incoming Call).5. Erase : Erase the current picture from your phone.6. View Lists : Displays all pictures.7. Pix Information : Display information on the selected picture, such as title, date/time, size, etc.Press [CAM] to return to Camera mode to take anotherpicture.1Press [MENU] .2Press for “New Pix” or for a “Saved Pix”. If you are looking for a saved photo, scroll throughthe captured pictures to select the picture youwant to send.3Highlight the picture and press [OK].4Under “Send To”, enter the email address ormobile phone number and press [OK]. 2Press [OK] to select a picture.5Under “Message”, press . The picture willcome up with the flashing cursor underneath.Enter the message and press [OK]. Press [MENU] to 1. Voice Record, 2. Insert Q.Text, 3. Delete Pix, 4. Insert Sound, 5. Insert Slide or 6. Slide Duration.7If you want to send the picture to any additionalrecipients, enter their information under “CC” or“BCC’.Press [MENU] to 1. Find, 2. Save or 3. Msg.Group.8To send the picture, press [SEND].Press [MENU] to 1. Send, 2. Preview, 3. Saveto Outbox, 4. Priority or 5. Expiration.Please refer to page 102 for more details on “New Pix Msg”.6Under “Subject”, enter a subject line for themessage. Press [OK].](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-46.png)
![VOICE SERVICEThis chapter addresses Voice Service, an advanced feature thatallows you to place calls using your voice. With Voice Memo (VM) you can record voice messages and set the Answering Machine.Topics include:VOICE RECOGNITION MODEVOICE TOOLS MENUChapter 59190CH591CAMERACH4HELP1Press [MENU] .Use up/down keys to change pix size, left/right keys tochange zoom and Side up/down keys control rotation onpreview mode. Camera menu provides more settings:1. SUB LCD: Enable previewing on external LCD.2. Flash: Provides just enough light to allow pictures to be taken.3. Self Timer: Set timer to take a self portrait.4. Add Frames: Choose from 40 different frames to make picture taking fun.5. IMAGE CONTROLS5.1 BRIGHTNESS 5.2 IMAGE EFFECT5.3 CONTRAST 5.4 QUALITY 6. Shutter Sound: Select a sound to use for shutter.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-47.png)
![CH593VOICE TOOLS MENUCH592VOICE RECOGNITION MODENAMEVoice Recognition (VR) enables you to place calls using your voiceand to record voice memos.1Press and hold until your phone turns toVoice Recognition mode.2“Please say the name after theprompt tone” will be displayedand you will hear “Name please”.1Press and hold until your phone turns toVoice Recognition mode.2Say a tag name when prompted. The memberand name will appear on the display and you willhear “Calling (name)”.VOICE MEMOVoice Memo allows you to record a reminder message that can be upto 60 seconds. To record a memo:1Press [MENU] to start Tools menu.2To enter a voice memo, press .1.5. Press [SEND] to access the “New Pix Msg” see “New Pix Msg” on page 102.31.1.To record a voice memo, press . Instructions will be displayed and you will hear “Please record at the tone.”1.2.To stop recording a memo, press [STOP] or [PAUSE/RESUME].1.3. Press [MENU] after recording a voice memo to “Review” or “Re-record.”1.4. Press [SAVE] to input a “Voice Memo” title, then press [OK]. (See page 31 for more information on entering letters, numbers and symbols.)2.To play voice memo, press .Select the message you want to play then press [PLAY] or press [MENU] to 1. Edit Title or 2. Send. Press [ERASE] to erase the menu.3.To play speaker mode, press .Select the message you want to play then press [PLAY] or press [MENU] to 1. Edit Title or 2. Send. Press [ERASE] to erase the menu.4.To erase all voice memos, press .“Erase all voice memos?” will be displayed. Press [OK] to erase all voice memos.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-48.png)
![CH595VOICE TOOLS MENUCH594VOICE TOOLS MENUVOICE DIAL TRAIN WORDSTrain allows you to use Control words to make a call without using thekeypad.Voice Dial allows you to call a person by simply saying their name.To access Voice Dial:1Press [MENU] to start Voice Tools menu.2To enter a voice dial, press .31.1. To record a voice dial, press . The phone book list will be displayed alphabetically. Select a name and press [OK]. Instructions will be displayed and you will hear “Name Please”.1.2. Say the name for the voice tag and repeat the name when prompted. You will hear “Added”.2. To play a voice dial, press . Highlight the message you want to play then press [PLAY] or press [ERASE].3. To play speaker mode, press .Highlight the message you want to play then press [PLAY] or press [ERASE].4. To erase all voice dials, press .“Removing all voice tags Proceed?” will be displayed. Press [OK] to erase all voice dials.2“Please listen closely to hear instructions”will be displayed and you will hear “Nowtraining control words. Please say the wordyes”. 3Say “Yes”. You will hear “Again”. Say “Yes”again. You will hear “Training word successful”.Use to train or untrain the Voice Recognition with the control words,“Yes”.YES1Press [MENU] .2“Please listen closely to hear instructions” willbe displayed and you will hear “Now trainingcontrol words. Please say the word no”.3Say “No”. You will hear “Again”. Say “No” again.You will hear “Training word successful”.Use to train or untrain the Voice Recognition with the control words,“No”.NO1Press [MENU] .](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-49.png)
![CH597VOICE TOOLS MENUCH596VOICE TOOLS MENUWAKE-UP1Press [MENU] .UNDO TRAIN ALL2“Undo voice recognition for all procedures?” will be displayed. Press [OK] to undo alltrained words.Press [MENU] .1Use to train or untrain the Voice Recognition with the control words,“Wake-Up”.Undo Train All erases all “trained” words.2“Please listen closely to hear instructions” willbe displayed and you will hear “Now trainingcontrol words. Please say the word Wake-Up”. 3Say “Wake-Up”. You will hear “Again”. Say “Wake-Up” again. You will hear “Trainingword successful”.VOICE SETTING1Press [MENU] .1Press [MENU] .SET ACTIVEHFK MODE2Select “Active Flip” or “Send Key” bypressing the Navigation Key left or right.3To save, press [OK].2Scroll to HFK Mode. Select “On” or “Off” bypressing the Navigation Key left or right.3To save, press [OK].Allows the user to activate or deactivate voice dial service.While using the Hands Free Kit, activates or deactivates the voicerecognition function.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-50.png)
![1To access your voice mail, press [MENU] or . Displays the number of voice mails and accesses them by pressing .VOICE MAILCH6101CH6100WHEN A NEW MESSAGE ARRIVES NEW TEXT MSG1The following display appearswhen a new message arrives.2To display the message, press [READ].1Press [MENU] or . To send a new message:2Under “Send To”, input the phone number and press [OK].3Under “Message”, input a new text messageand press [OK].By pressing [MENU], you can choose from the following:1. Find : Search the phone number which is stored in the phone book.2. Save : Stores the phone number the message was sent to.3. Msg. Group : Select, all the phone numbers in a group.4The default call back number is automaticallyinputted into the Default CB# field. You can scroll to the number and edit it or simply press [EDIT].77.1. To send the text message, press [MENU] and select the “Send” then press [OK].7.2. To save the text message, press [MENU] andselect the “Save to Outbox” then press [OK].5Press the Navigation Key down for more fields.Under “Priority”, select “Normal’ or “Urgent”.6Under “Insert Signature”, select “On” or “Off”.By pressing [MENU], in the message input screen you canchoose from the following:1. Insert Quick Text: Insert Quick Text function brings the saved already sentences.2. Insert Sound: Insert Sound function inserts sound in Text Msg.3. Insert Picture: Insert Picture function inserts picture in Text Msg. 4. Insert Animation: Insert Animation function inserts Animation in Text Msg.5. Save to Quick Text: Save to Quick Text function saves the written sentences on Quick Text.(Please refer to page 31 for more details on entering letters,numbers and symbols.)](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-52.png)
![NEW PIX MSG NEW PIX MSGCH6103CH61021Press [MENU] or . To send a new picture message:3Under “Send To’, input the phone number and press [OK].4Under “Message”, input a new text messageand press [OK].(Please refer to page 86 for more details on taking a photo.)5Under “Subject”, input a message subject andpress [OK].(Please refer to page 31 for more details on entering letters,numbers and symbols.)6To send a message to another person, selectthe “CC” or “BCC” and input the phonenumbers, then press [OK].77.1. To send the picture message, press [MENU] and select the “Send” then press [OK].7.2. To save the picture message, press [MENU] and select “Save to Outbox” then press [OK].2Phone goes into camera mode automatically. Take a picture and press [OK].By pressing [MENU], the user can choose from the following:1. Find : Allows the user to search the phone number which isstored in the phone book.2. Save : Stores the phone number the message was sent to.3. Msg. Group : Allows to select all the phone numbers in agroup.4. Online Album : To send pictures by using online Address Book.By pressing [MENU], the user can choose from the following:1. Find : Allows the user to search the phone number which isstored in the phone book.2. Save : Stores the phone number the message was sent to.3. Msg. Group : Allows to select all the phone numbers in agroup.By pressing [MENU], the user can choose from the following:1. Take Pix : To take a new photo.2. Voice Record : To record a voice memo.3. Insert Q.Text : Insert Quick Text function brings the saved already sentences.4. Insert/Delete Pix : To Insert/delete a taked picture.5. Insert/Delete Sound : To Insert/delete a sound in Pix Msg.6. Insert/Delete Slide : To Insert/delete a another picture in Pix Msg.7. Slide Duration : To select a slide duration time.By pressing [MENU], the user can choose from the following:1. Send : To send a picture message.2. Preview : To preview a written picture message.3. Send to Outbox : To save a message to “Outbox” folder.4. Priority : To select priority “Normal” or “High”5. Expiration : To select expiration time “Off”, “1 day”, “2 days”, “3 days”, “4 days” or “5 days”.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-53.png)
![INBOX INBOXCH6105CH6104*SAVE MEDIA1To object saved to media gallery folderSAVE TO CONTACT1To save number to contact.FORWARD1To forward the text message.2Input the phone number of the person you aresending the message, then press [OK].3Input any text message to go along with theforwarded message, then press [OK].1Press [MENU] or . : Urgent New Msg (not read): Urgent Read Msg: New Msg (not read): Old Msg (already read): Lock (already read and locked)The Inbox manages received text messages. To access:2Select a message and press [OK]. The message is displayed. To delete a message,press [ERASE].Press [MENU].3REPLY1To reply to the text message.2Type your reply and press [OK].REPLY WITH COPY12345To reply to a received message and include thereceived message into the message.The default call back number is automaticallyinputted into the Default CB# field. You can scroll to the number and edit it.To send the text message, press [SEND].To save the text message, press [MENU] andselect the “Save to Outbox” then press [OK].Under “Insert Signature”, select “On” or “Off”.*PIX INFO1To show pix message information.*PLAY SLIDE SHOW1To play include slide pix message.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-54.png)
![INBOX OUTBOXCH6107CH6106SAVE TO SAVED1To save the text message in your phone.SAVE TO QUICK TEXTLOCK & UNLOCK1To lock or unlock the text message.2Select “Lock” to lock the message or “Unlock”to unlock the message, then press .1To save received text msg to “Quick text”.BLOCK SENDER1To block all incoming messages from addresseson block list.• “*Pix Info” or “*Play Slide Show” menu display appears when aonly pix message.• “*Save Media” menu display appears when a only “Pix” or“EMS” message.CHECKING SENT TEXT MESSAGES1Press [MENU] or . RESEND1To resend a text message.*PIX INFO1To show pix message information.Manages sent text messages or messages waiting to be sent.EDIT MESSAGE13Input the phone number and press .2Input a text message and press .To send a message to another person.: Auto resend: Delivered: Fail: Not send: Read: Sent22.1. Select a message, then press [OK].The text message is displayed.Press [MENU].32.2. To erase message, press [ERASE].](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-55.png)
![CH6109CH6108WEB ALERTSOUTBOX*STATE1To display the status of an outbox message.SAVE TO SAVED1To save the text message in your phone.LOCK & UNLOCK1To lock or unlock the text message.2Select “Lock” to lock the message or “Unlock”to unlock the message, then press [OK].SAVE TO CONTACT1To save number to contact.• “*Pix Info” menu display appears when a only pix message.• “*State” menu display appears when a only text message.WEB ALERTS1Press [MENU] or . 2To select GoTo, press .To select Erase Message, press .3The text message will be displayed.• [ ] : Read Message.• [ ] : Unread Message.• [ ] : Displays the remaining text.• GoTo : Connecting Selected Site.• Erase : Erase Selected Message.V](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-56.png)
![CH6111CH6110QUICK TEXTSAVEDManages saved messages from the Inbox/Outbox.SAVED1Press [MENU] or . 22.1. Select a text message then press [OK].The text message is displayed.2.2. To erase message, press [ERASE].4If the text message is saved from the “Inbox”menu, this screen will be displayed.3Press [MENU].If the text message is saved from the “Outbox”menu, this screen will be displayed.5Select one by pressing [OK].To select inbox menu : *Pix Info, *Play Slide Show, Reply, Reply With Copy, Forward, Save to Quick Text, *Save Media, Block Sender, Save to Contact, Lock & UnlockTo select outbox menu : *Pix Info, Resend, Edit Message, Save to Contact, Lock & Unlock, *State• “*Pix Info” or “*Play Slide Show” menu display appears when a only pix message.• “*Save Media” menu display appears when a only “Pix” or“EMS” message.• “*State” menu display appears when a only text message.1Press [MENU] or . To edit the quick text message you have saved:QUICK TEXT22.1. Select a message from the list. Press [MENU].2.2. To add a new quick text message, press [ADD NEW]. To edit the quick text message you have selected, press [EDIT].3To erase the saved quick text message, press [ERASE].](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-57.png)
![CH6113CH6112SETTINGSERASE ALLERASE MESSAGES1Press [MENU] or . 21. To erase all the inbox messages, press .3Select “OK” or “Cancel” with [OK] or [CANCEL].2. To erase all the outbox messages, press .3. To erase the saved messages, press .Old Inbox : To erase all messages already read.(However, the locked Message(s) will not be deleted).Entire Inbox : To erase all messages. AUTO SAVEPress [MENU] or .Press . Select either “Off”, “On” or “Prompt” withthe Navigation key.Press [OK].SAVE SENT MSGPress . Select “Automatic” or “Prompt” withNavigation key.Press [OK].PIX RECEIVE MODEPress [MENU] or .Manages messaging features through various features.123123](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-58.png)
![CH6115CH6114SETTINGSSETTINGSDEFAULT CALL BACK1Press [MENU] or . 2Press .Input a call back number, then press [OK].EDIT VOICE C.B12Press . Input a new voice call back number or editvoice call back number.3Press [OK].Edits a default call back number so that the recipient can call back orreply.Press .Select “Disable” or “Enable” with Navigation key. Press [OK].AUTO ERASE OUTBOX123Press [MENU] or . Press [MENU] or . You can look it up from the phone book bypressing [FIND].You can look it up from the phone book bypressing [FIND].Press [MENU] or .AUTO ERASEPress .Select “Disable” or “Enable” with Navigation key.Automatically erases inbox/outbox messages when new messagesarrive.Press [OK].AUTO ERASE INBOX123](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-59.png)
![CH6116SETTINGSENTRY MODE12Then press .Select “Alpha Mode” or “T9 Mode” withthe Navigation key.3Press [OK].Sets an Entry Mode as a default. The T9 mode indicator will appearwhenever the input mode is activated if the T9 mode is the default.Press [MENU] or . CH6117SETTINGSDIRECT VIEW12Then press .Select “On” or “Off” with the Navigation key.ON : Set to read msg without entering inbox in SMS menu.OFF : Set to read msg after entering inbox in SMS menu.3Press [OK].Press [MENU] or . If the Direct View is set to on, the user will be able to view themessage by pressing the read key. If the Direct View is set to off,the user can view the message by entering SMS Menu-> Inbox.Create a signature that can be automatically inserted at the end of amessage.EDIT SIGNATURE1Press [MENU] or . 2Press .To input “Signature”, put the cursor on EditSignature and enter Signature Edit window byusing right or left direction keys. 3To activate Signature function, put the cursor onInsert Signature and select “On” by using right orleft direction keys. To inactivate Signaturefunction, select “Off”.4Press [OK].ALERT12Press . Select “On” or “Off” with the Navigation Key.3Press [OK].Send yourself a message to remember important notes or events.Press [MENU] or .](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-60.png)
![WEB BROWSINGThis chapter addresses Internet services and web browsing. For more detailed information contact your service provider.START INTERNET BROWSERBROWSER MENUChapter 7CH7119CH6118SETTINGS3Press [OK].BLOCK OR UNBLOCK12Then press .Select “Block”, “Unblock” or “View List ofBlocked Address” with the Navigation key.Press [MENU] or . BLOCK : Enter the address to block.UNBLOCK : Enter the address to remove from block.VIEW LIST OF BLOCKED ADDRESS : Display the blockedlist on LCD.](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-61.png)
![START INTERNET BROWSER BROWSER MENUCH7121CH7120BACK1To return to the previous page, press [MENU]or , then press . ACCESS THE INTERNET1To start your Internet browser and accesswebsites through your wireless handset press[MENU] or . HOME1To display the homepage, press [MENU]or , then press . ADDRESS1To select “Address”, press [MENU]or , then press . REFRESH1To select “Refresh”, press [MENU]or , then press . BROWSER MENUThe browser menu lists the actions necessary to operate the browser.press [MENU] or press .When the history item is selected from the browser menu, the browser isdisplayed with the browser version and copyright information. The device layer version is also displayed.When the home item is selected from the browser menu, the phonedisplays the home page.Selecting the “Address” action displays the URL of the currentpage.Selecting the refresh item from the browser menu refresh the currentpage.HISTORY1To select “History”, press [MENU]or , then press . FORWARD1To forward to the next page, press [MENU]or , then press . CLEAR MEMORY1To clear browser memory, press [MENU]or , then press . SETTINGS1To select “Settings”, press [MENU]or , then press .](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-62.png)
![BROWSER MENUSAFETY ANDWARRANTYThis chapter addresses the safety guidelines and precautions tofollow when operating your phone. Before operating your phone,please be aware of all the safety details.This chapter contains the terms and conditions of services and thewarranty for your phone. Please review them thoroughly. SAFETY INFORMATION FOR WIRELESS HANDHELD PHONESSAFETY INFORMATION FOR FCC RF EXPOSURESAR INFORMATIONFDA CONSUMER UPDATEPROTECT YOUR WARRANTY12 MONTH LIMITED WARRANTYChapter 8123CH7CH8122ADVANCED1To select “Advanced”, press [MENU]or , then press . Selecting the advanced item in the browser menu displays theadvanced menu items.To exit browser, press [MENU]or , then press . EXIT1](https://usermanual.wiki/Pantech/TX-170S/User-Guide-452150-Page-63.png)
