Paradox Security Systems DGPR910 Proximity Reader User Manual DGPR910 TI01

Paradox Security Systems Proximity Reader DGPR910 TI01

User Manual

EnglishTechnical SpecificationsAll specifications are subject to change without notice.FeaturesTricolour LED DisplayThe DGP-R910 reader includes a tricolour LED display (red, green and amber) that is used to indicate the reader’s status. The LED’s intensity is adjusted through the DGP-ACM11.Audible ToneThe DGP-R910 reader includes a built in beeper with a frequency that is adjusted through the DGP-ACM11.Weather ResistantMount indoors or outdoors.Error DisplayAll DGP-R910 readers display communication errors between the reader and the DGP-ACM11 by flashing the amber LED every sec-ond.Firmware UpgradeConnect the DNE-CONV2 as shown in Figure 2. Refer to the DNE-CONV2 installation manual for additional information.Installation NotesMounting on MetalMetal may decrease the read range. The DGP-R910 card reader can be mounted on metal but do not surround it by metal. If the reader must be installed in a metal enclosure, ensure that the face of the card reader is not covered and that there's at least 4cm (1.6") between the card reader and the metal on all sides.WiringSee Figure 1 for wiring instructions.Do not connect more than one DGP-R910 on a single DGP-ACM11.RESIDENTIAL EQUIPMENTCLASS B DIGITAL DEVICEINFORMATION TO USERThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi-tions: (1) This device may not cause harmful interference, and (2) This device must accept any inter-ference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for Class B Digital Device, pursu-ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele-vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected• Consult the dealer or an experienced radio/TV technician for helpAny changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Power Input: 11Vdc to 14.5VdcCurrent Consumption 100mA, With Card 115 mAFrequency: Exciter field 125 KHz Pulse ModulatedOperating Temperature: -35°C (-31°F) to +65°C (149°F)Output Formats: RS-485Cable Distance: 300m (1000 ft.)Cables: 4-wire Cables (Twisted Pair recommended)4-Wire Indoor/Outdoor Proximity ReaderDGP-R910 V1.0780 Industriel Blvd., Saint-Eustache (Quebec) J7R 5V3 CANADATel.: (450) 491-7444 Fax: (450) 491-2313paradox.comPRINTED IN CANADA - 04/2006 DGPR910-TI00DGP-ACM11Figure 1: 4-wire Connection / Conexión de 4 Cables / Raccordement à 4 fils1. Red / Rojo / Rouge2. Black / Negro / Noir3. Green / Verde / Vert4. White / Blanco / BlancAll jumpers are on.Todos los puentes están ON.Tous les cavaliers sont installés.To power supply or COMBUSA una fuente de alimentación o al COMBUSVers le bloc d’alimentation ou le COMBUSTo computerA una PCVers l’ordinateurFigure 2: Firmware Upgrade / Actualización del Firmware / Mise à niveau du micrologiciel1. Red / Rojo / Rouge2. Black / Negro / Noir3. Green / Verde / Vert4. White / Blanco / Blanc

Navigation menu