Paradyne 3800 Users Manual COMSPHERE Series Modems, S 3810, 3811, And 3820, User's Guide

2015-02-06

• Table of Contents
• List of Figures
• List of Tables
• Preface
  • Objectives and Reader Assumptions
  • How to Use This Manual
  • Related Documents
• Introduction
  • Overview
  • Features
  • Options
  • COMSPHERE 3800 Series Models
• Model 3810 and 3820 Installation
  • Overview
  • Series Modem Package
    • Customer-Supplied Equipment
  • Model 3810 or Model 3820 Modem Installation
  • Model 3810 Dial-Line Connection Model 3810 4- Wire/ 2- Wire Leased- Line Connection
  • Model 3820 Dial-Line Connection Model 3820 2- Wire Leased- Line Connection
  • DTE Connection
  • Model 3810 and Model 3820 Telephone Connection
  • Dial Network Management System Connection
  • AC Power Transformer Connection
  • Modem Power-Up
  • Removing and Replacing Model 3810 and Model 3820 Modems
• Model 3811 Installation
  • Overview
  • Model 3811 Installation
  • Removing and Replacing Model 3811 Modems
• DCP Operation
  • Overview
  • Diagnostic Control Panels
    • Models 3810 and 3820 Diagnostic Control Panels
    • Model 3811 Faceplate and Shared Diagnostic Control Panel
  • Status Indicators
  • Diagnostic Control Panel Operation
    • LCD Display
    • Keypad
  • Menu Structure
    • Top-Level Menu Status and Operational Messages
  • Selecting Factory Configuration Options
    • Using the Diagnostic Control Panel (DCP)
    • Using AT Commands
  • Diagnostic Control Panel Security Access
• Call Setup Branch
  • Overview
  • Call Setup Branch
    • Dial
    • Disconnect Answer
    • Dial Standby/Return to Dial
    • Change Directory
• Talk/Data Branch
  • Overview Talk/Data Branch
    • Manual Dialing when the Remote Modem Is Configured for Auto- Answer
    • Manual Dialing when the Remote Modem Is Configured for Manual Answer
    • Placing Modems into Talk Mode Once Modems Are Online
• Status Branch
  • Overview
  • Status Branch
    • VF
    • Identity
    • DTE RS366A
    • Options
    • Record
• Test Branch
  • Overview
  • Test Branch
    • Abort
    • Self
    • Loc Analog Loop
    • Rem Digital Loop
    • Loc Digital Loop
    • Pattern
• Configure Branch
  • Overview
  • Configure Branch
    • Editing and Saving a Configuration Option
    • Summary
  • Configuration Tables
    • DTE Interface
    • DTE Dialer
    • Line Dialer
    • Dial Line
    • Leased Line
    • V.42/MNP/Buffer
    • Tests
    • Misc
  • Security Configuration Options
• Control Branch
  • Overview Control Branch
    • Speaker Reset
    • Make Busy/Remove Make Busy
    • Service Line/Disconnect Service Line
    • DownLoad Code
  • Automatic Firmware Download
    • Download Failure
• Remote Branch
  • Overview
  • Remote Branch
• Security
  • Overview
    • Originate Access Security
    • Answer Access Security
  • Security Branch
    • Set Access Ctrl
    • Reset Security
  • Security Password Entry Techniques
    • Answer Access Password (VF-Side and DTE- Side Entry Techniques)
    • Originate Access Password
  • Database Table Examples
• Fax Operation
  • Overview
  • Fax Operation
• AT Command Set and S-Registers
  • Overview
  • Operating Modes
    • Switching Between Data Mode and Online Command Mode
  • Command Guidelines
  • AT Command List
    • AT Command Format
  • S-Register List
    • S-Register Format
• Menu Tree
  • Overview
• Result Codes
• Troubleshooting
  • Overview
• Technical Specifications
  • Technical Specifications
• Pin Assignments
  • Overview
  • VF Connector Pin Assignments
  • EIA-232-D Pin Assignments
  • EIA RS-366-A Pin Assignments
• ITU-T V.25bis Dialing Commands and Response
  • Overview Call Request Commands
    • Call Request with Number Provided (CRN)
    • Call Request with Stored Memory Address Provided (CRS)
  • Call Response
    • Call Failure Indication (CFI)
    • Call Connecting (CNX)
  • Call Answer Commands
    • Incoming Call (INC)
    • Disregard Incoming Call (DIC)
    • Connect Incoming Call (CIC)
  • Program Normal (PRN)
  • Request List of Stored Numbers (RLN)
  • List Stored Number Response (LSN)
  • Command Response
    • Valid (VAL)
    • Invalid (INV)
• Default Configuration Options
  • Overview
• Equipment List
• Glossary
• Index