Parker Hannifin MSLINK0009 Wireless Strain Sensor User Manual Exhibit D Users Manual per 2 1033 b3

Exhibit D Users Manual per 2 1033 b3

LORD Corporation ILOX-ICD Revision B Prepared by J. Dunklee

ILOX Radio Module Integration Guide

1. Overview

The ILOX Radio Module is a wireless sensor data acquisition system that includes a circuit board, antenna,

and battery pack. It is used exclusively in the LORD Corporation custom-designed ILOX nodes. The radio

module is installed in a variety of metal housings that mechanically integrate into the end-application sensor

assembly. The metal housings are welded shut and intended for one time use until the batteries are

depleted. No part of the internal assembly is accessible to the end user. The ILOX radio module is intended

for use with LORD gateways and data acquisition software, or user software developed using the LORD

MSCL code library. The module includes an integrated microcontroller and radio transceiver that

communicates to LORD gateways in the 2.4 GHz band. Operating temperature range is -40 to +60 °C.

2. Operation

Because the node is designed for one time use, power conservation is very important. After the nodes are

manufactured they are put in to a low power sleep mode. To start using them, use the SensorConnect

software to execute the Set Nodes to Idle command. All other operation is as typical with any other node in

SensorConnect. Refer to the SensorConnect User Manual.

LORD Corporation ILOX-ICD Revision B Prepared by J. Dunklee

3. Regulatory Marks and Guidelines

a. Node assemblies are labeled with the following FCC/IC ID number.

Contains Transmitter Module

FCC ID: XJQMSLINK0009

IC ID: 8505A-MSLINK0009

b. The following notice applies to the nodes. In addition, based on the antennas and power

parameters specified for this device, it must be operated at least 1.36 cm from the operator to

ensure RF levels do no exceed what is considered healthy for human exposure.

Contains Transmitter Module