Pasco Specialty And Mfg Ps 2100A Users Manual 012 09989B Text
2015-02-06
: Pasco-Specialty-And-Mfg Pasco-Specialty-And-Mfg-Pasco-Ps-2100A-Users-Manual-516940 pasco-specialty-and-mfg-pasco-ps-2100a-users-manual-516940 pasco-specialty-and-mfg pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Instruction Sheet 012-09989B USB Link PS-2100A Light Emitting Diode (LED) connection indicator Alignment tab USB Plug USB icon Nine pin mini-DIN Port Included Equipment Part Number USB Link PS-2100A Recommended Items Part Number PASCO PASPORT Compatible Interface* see www.pasco.com PASCO Data Acquisition Software* see www.pasco.com Optional Items Part Number PASPORT Sensor Extension Cable PS-2500 PASPORT Analog Adapter or Digital Adapter PS-2158 or PS-2159 *See the PASCO catalog or the PASCO web site at www.pasco.com for more information. Quick Start • Plug the USB Plug into a USB port on a computer or into a port on a USB hub connected to a computer. (Look for the USB icon.) • Connect a PASPORT sensor to the mini-DIN port on the other end of the USB Link. Note that a PASPORT sensor will connect to the USB Link in only one way. Match the groove on one side of the sensor or sensor plug with the alignment tab on the bottom lip of the USB Link • PASPORT Sensor plug OR PASPORT Sensor USB Link If you have an analog sensor with a five pin or eight pin DIN plug, or a digital sensor with a phone plug, connect the sensor to a PASPORT Analog Adapter (PS-2158) or a PASPORT Digital Adapter (PS-2159), and then connect the adapter to the USB Link. 800-772-8700 +1 916 786 3800 support@pasco.com www.pasco.com Model No.PS-2100A Introduction Introduction The PASCO PS-2100A USB Link is an interface that uses the Universal Serial Bus protocol to enable communication between PASCO sensors and a USB-compatible computer that is running PASCO’s data acquisition software*. The USB Link can be connected to and disconnected from a USB port without turning off the computer first. If the USB Link is connected to a computer that is running the software, the light emitting diode (LED) on the top of the USB Link lights up to indicate that the software detects the connection. NOTE: If the computer is on, the data acquisition software is running, the USB Link is securely connected, but the LED is not on, disconnect and then reconnect the USB Link to the USB port. (Contact Technical Support for more information.) *See the PASCO catalog or web site at www.pasco.com for more information. The PS-2500 PASPORT Sensor Extension Cable is 2 meters long with an eight pin female DIN plug at one end and a PASPORT sensor plug at the other end. Use the cable to extend the distance that your sensor can reach. • SETUP: For information on setting up the data acquisition software and recording data, refer to the User’s Guide for the data acquisition software. Technical Support For assistance with any PASCO product, contact PASCO at: Address: PASCO scientific 10101 Foothills Blvd. Roseville, CA 95747-7100 Phone: +1 916-786-3800 (worldwide) 800-772-8700 (U.S.) Web: www.pasco.com Email: support@pasco.com Limited Warranty For a description of the product warranty, see the PASCO catalog. Copyright The PASCO scientific Instruction Sheet is copyrighted with all rights reserved. Permission is granted to non-profit educational institutions for reproduction of any part of this manual, providing the reproductions are used only in their laboratories and classrooms, and are not sold for profit. Reproduction under any other circumstances, without the written consent of PASCO scientific, is prohibited. Trademarks PASCO, PASCO Capstone, and PASPORT are trademarks or registered trademarks of PASCO scientific, in the United States and/or in other countries. For more information visit www.pasco.com/legal. For information about the USB Link, go to the PASCO web site at www.pasco.com and enter PS-2100A in the Search window. Product End of Life Disposal Instructions: This electronic product is subject to disposal and recycling regulations that vary by country and region. It is your responsibility to recycle your electronic equipment per your local environmental laws and regulations to ensure that it will be recycled in a manner that protects human health and the environment. To find out where you can drop off your waste equipment for recycling, please contact your local waste recycle/disposal service, or the place where you purchased the product. The European Union WEEE (Waste Electronic and Electrical Equipment) symbol (to the right) and on the product or its packaging indicates that this product must not be disposed of in a standard waste container. ® 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : griffith Create Date : 2001:01:04 10:57:57Z Modify Date : 2013:12:30 15:52:52-08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 9.5.1 (Windows) Creator Tool : FrameMaker 7.2 Metadata Date : 2013:12:30 15:52:52-08:00 Format : application/pdf Title : 012-09989B PS-2100A text.fm Creator : griffith Document ID : uuid:04bf5ae9-5e90-41b5-8c33-2236cd619e89 Instance ID : uuid:1acbde24-5eaf-4c9f-90a5-87a74483ccb2 Page Mode : UseOutlines Page Count : 2EXIF Metadata provided by EXIF.tools