Patton Electronic 4020 Series Users Manual SmartLink SL4020 Analog VoIP SoHo Router Getting Started Guide

2015-02-06

• Summary Table of Contents
• Table of Contents
• List of Figures
• List of Tables
• About this guide
  • Audience
  • Structure
  • Precautions
    • Safety when working with electricity
    • General observations
  • Typographical conventions used in this document
    • General conventions
• Chapter 1 General information
  • SmartLink 4020 overview
• Chapter 2 SmartLink installation
  • Installing the router
• Chapter 3 Home
  • System information
    • System Uptime
    • WAN IP Address
    • LAN IP Address
    • MAC address
    • Application Version
    • Config Date
    • Security
    • Application Code Version
    • Downloader Code Version
  • System Status
    • SIP Messages Sent
    • SIP Messages Received
    • SIP Bytes Sent
    • SIP Bytes Received
    • RTP Packets Sent
    • RTP Packets Received
    • RTP Bytes Sent
    • RTP Bytes Received
• Chapter 4 Network—WAN
  • Status
    • Interface Status
      • Enabled
      • Service
      • Protocol
      • Interface Status
    • Network Settings
      • Dynamic IP Assignment
      • IP address
      • MAC address
      • Subnet Mask
      • Default Gateway
      • Domain name
      • DNS address
      • DynDNS address
      • VLAN
      • Priority Tag
  • Settings
    • Internet Configuration
      • Device Operating Mode
      • Obtain WAN configuration dynamically
      • Specify fixed WAN configuration
    • WAN PPPoE Configuration
      • Enable PPPoE
      • Authentication
      • Settings
    • Dynamic DNS
      • Configuring Dynamic DNS
    • MAC Spoofing Configuration
      • WAN MAC Address (Spoofed)
    • MTU Size
      • MTU (Maximum Transfer Unit) Size
    • WAN VLAN Configuration
      • WAN VLAN Tag (IEEE 802.1q)
      • WAN Priority Tag (IEEE 802.1q)
    • Saving your work
  • QoS (Quality of Service)
    • Enable Voice QoS
    • Assured Bandwidth for Voice
    • Maximum Uplink Bandwidth Allowed
    • Saving your work
  • ToS/DiffServ
    • Saving your work
  • IPSec Configuration
    • Select Tunnel to view/modify
    • Enable tunnel 1
    • Remote IP Address range
    • Remote security gateway
    • Security Mode
    • Outbound AH SPI (DEC)
    • Outbound AH Authentication Algorithm
    • Outbound AH Authentication Key (HEX)
    • Outbound ESP SPI (DEC)
    • Outbound ESP Encryption Algorithm
    • Outbound ESP Authentication Algorithm
    • Outbound ESP Encryption Key (HEX)
    • Outbound ESP Authentication Key (HEX)
    • Inbound AH SPI (DEC)
    • Inbound AH Authentication Algorithm
    • Inbound AH Authentication Key (HEX)
    • Inbound ESP SPI (DEC)
    • Inbound ESP Encryption Algorithm
    • Inbound ESP Authentication Algorithm
    • Inbound ESP Encryption Key (HEX)
    • Inbound ESP Authentication Key (HEX)
    • Saving your work
• Chapter 5 Network—LAN
  • Settings
    • Network Settings
    • Saving your work
  • DHCP
    • Server Settings
      • Client IP Address Range
    • Client Network Information
      • Domain Name
      • DNS Server
    • Static Address Assignment
    • Viewing the DCHP Client Table
    • Saving your work
  • Routing
    • Dynamic Routing
    • Static Routing
    • Viewing the Routing Table
    • Saving your work
  • Port Forwarding
    • Reserved Ports
    • Port Forwarding to LAN
    • De-Militarized Zone
    • Saving your work
  • IP Filtering
    • Filter IP Range
    • Saving your work
• Chapter 6 Telephony
  • VoIP Status
    • VoIP Server Registration Status
      • Current Server
      • Domain
      • Base RTP Port
    • Phone Line Status
      • Registration Status
      • User Name
      • Caller ID Setting
      • Subscribed for Voicemail
      • Messages waiting
  • SIP
    • SIP Configuration
      • SIP Server Settings
      • Gateway Settings
    • SIP Extensions
      • Support PRACK method
      • Encode SIP URI with user parameter
      • Send INVITE with Timer header
      • Call Hold using C=0.0.0.0
      • Send NOTIFY
    • RTP Telephone Event Configuration
    • VoIP VLAN Configuration
    • SIP Parameters
      • Hook Flash MIME Type
      • SIP Timer Values (milliseconds)
      • RTP Parameters
    • NAT Traversal
      • Outbound Proxy IP
      • Outbound Proxy Port
      • Stun Server IP
      • Stun Server Port
      • UPnP
      • NONE
    • Saving your work
  • Audio/CODEC Configuration
    • CODECS
    • Packetization
    • Jitter Buffer
    • FAX without T.38 (Use G.711 fax)
    • Saving your work
  • Phone 1 & Phone 2
    • User Information
      • Phone Number
      • User Name
      • Port
      • CallerID Name
      • Password
    • Supplementary Service Activation
      • Call Forward All
      • Selective Call Forward
      • Three-Way Conferencing
      • Incoming Call Block
      • Distinctive Ring
      • Call Transfer
      • Dialing by IP Address
      • Speed Dial
      • Message Waiting Indicator
      • Call Forward on Busy
      • Conditional Call Forward
      • Call Waiting
      • Anonymous Call Reject
      • Caller ID
      • Call Return
      • Do Not Disturb
      • Self Caller ID Block
      • Outgoing Call Block
    • Dial Out Type
      • Dial Out Type
      • Hot Line Number
      • Warm Line Number
    • Call Forward Settings
      • Cfwd All Dest
      • Cfwd Busy Dest
    • Selective Call Forward Settings
      • Incoming caller #1–8
      • Forward destination #1–8
    • Incoming Call Block
      • Block Caller ID
    • Outgoing Call Block
      • Digit Pattern
    • HTTP Digest Setting
    • Saving your work
  • Speed Dial
    • Line 1 Speed Dial Settings
      • Speed Dial Serv
      • Speed Dial 1–8 Phone Number/IP Dialing
    • Line 2 Speed Dial Settings
      • Speed Dial Serv
      • Speed Dial 1–8 Phone Number/IP Dialing
    • Saving your work
• Chapter 7 System
  • Set Security Password
    • Web Page Protect
    • New Root Password
    • New User Password
    • Confirm new password
    • Saving your work
  • Configuration
    • Logging
      • Enable Syslog
      • Syslog Server
      • Enable Debug
      • Debug Server
      • Debug Connect Port
      • Saving your work
  • Service Access
    • Enable HTTP
    • Enable Ping Reply
    • Saving your work
  • Localization
    • Call Progress Tones
      • Dial Tone
      • Prompt Tone
      • Confirm Tone
      • Holding Tone
      • Busy Tone
      • Ring Back Tone
      • Off Hook Warning
    • Distinctive Ring Setting 1–8
    • Supplementary Service Keys
      • Call forward All
      • Call forward on Busy
      • Call forward selective
      • Call Waiting
      • Incoming Call Block
      • Block Anonymous Calls
      • Distinctive Ring
      • Warm Line
      • Do Not Disturb
      • IP Dialing
      • Speed Dialing
      • Income Caller ID
      • Self Caller ID Block
    • Calling Prefix Keys
      • Call Return
      • Warm Line
      • Speed Dial
      • Call Forward All
      • IP Dialing
      • Call Hold
      • Call Waiting (call alternative)
      • Call Conference
      • Call Conference Drop
      • Call Transfer
      • Voicemail access
      • Call Forward Busy Destination
      • Hotline
    • Control Timer Values
      • Hook Flash Timer
      • SIP Session Timer value
      • Conditional Call Forwarding Timer
      • Warm Line Delay
      • Interdigit Timer
      • Offhook Idle Time
      • Offhook Warning tone time
    • FXS Port
      • FXS port Input Gain
      • FXS port Output Gain
      • Caller ID Method
      • “Call Progress Tones” Synchronization
    • Ring Setting
      • Ring Waveform
      • Ring Frequency
      • Ring Voltage
    • FXS Port Polarity Configuration
      • Idle Polarity
      • Caller Conn Polarity
    • Saving your work
  • SNMP Configuration
    • SNMP Trap Configuration
      • IP address
      • Trap Community
    • SNMP Community Configuration
      • Read Community
      • Write Community
    • SNMP System Configuration
      • System Description
      • System Object Id
    • Saving your work
  • Auto Upgrade
    • Routine Upgrade every xxx day(s)
    • Enable Auto Upgrade
    • Auto Upgrade Protocol
    • Upgrade Server
    • Auto Upgrade URL
    • Saving your work
  • Manual Upgrade
  • Reload
• Chapter 8 Documentation
  • Introduction
• Chapter 9 Logout
  • Introduction
• Chapter 10 Contacting Patton for assistance
  • Introduction
  • Contact information
    • Patton support headquarters in the USA
    • Alternate Patton support for Europe, Middle East, and Africa (EMEA)
  • Warranty Service and Returned Merchandise Authorizations (RMAs)
    • Warranty coverage
      • Out-of-warranty service
      • Returns for credit
      • Return for credit policy
    • RMA numbers
      • Shipping instructions
• Appendix A Compliance information
  • Compliance
    • EMC Compliance:
    • Safety Compliance
  • Radio and TV Interference
  • CE notice (Declaration of Conformity)
• Appendix B Specifications
  • Voice Connectivity
  • Connectivity
  • Voice Processing (signalling dependent)
  • Fax and Modem Support
  • Voice Services/Features
  • IP Services
  • Management
  • Operating Environment
  • System
• Appendix C Dial plans
  • Introduction
  • Sample Dial Plans
    • Simple Dial Plan
    • Non-dialed Line Dial Plan
    • Complex Dial Plan
• Appendix D Calling Features
  • Introduction