Paxton Access 477500 Net2Air Bridge User Manual

Paxton Access Ltd Net2Air Bridge

User Manual

ins-20004ins-20004.indd 1 25/02/2016 11:25:37
112PoE802.3afins-20004.indd 1 25/02/2016 11:25:41
212PoE802.3afins-20004.indd 2 25/02/2016 11:25:43
3redaeR:n oitua C ylnosredaerC D V21roF12VRed LED Amber LED Green LED Data/D0Clock/D1Media Detect 0VEntry12V12V Lock 0V0VN.C.N.O. COMAlarm12VGreen LED Exit0VContact 0V0VTamper PSU0Vnottu BtixE yaleR kcoLstuptuOstupnIrewoPtcatnoCrepmaT/USPNet2 nano http://paxton.info/10712345608890 m3m15m20m30m50ft65ft100ft10ft0 ft125ins-20004.indd 3 25/02/2016 11:25:47
4redaeR:n oitua C ylnosredaerC D V21roF12VRed LED Amber LED Green LED Data/D0Clock/D1Media Detect 0VEntry12V12V Lock 0V0VN.C.N.O. COMAlarm12VGreen LED Exit0VContact 0V0VTamper PSU0Vnottu BtixE yaleR kcoLstuptuOstupnIrewoPtcatnoCrepmaT/USPNet2 nano http://paxton.info/10712345608890 m3m15m20m30m50ft65ft100ft10ft0 ft125ins-20004.indd 4 25/02/2016 11:25:48
53m10ft15m50ft 65ft 100ft20m 30m0m0ft!!1 2 3 4 5 6 7 8 9!!ins-20004.indd 5 25/02/2016 11:26:15
63m10ft15m50ft 65ft 100ft20m 30m0m0ft!!1 2 3 4 5 6 7 8 9!!ins-20004.indd 6 25/02/2016 11:26:25
7≤ 1003m - 15m-20°C +55°C 10 ft - 50 ft-4°F +131°FIEEE 802.15.4+44 (0)1273 811011paxton.supportsupport@paxton.co.uk+1(800) 672-7298usapaxton.supportsupportUS@paxton-access.com+49 (0) 251 2080 6900paxton.gmbh.supportsupport@paxton-gmbh.de+31 (0)76 3333 999paxton.benelux.supportsupport@paxton-benelux.com+33 (0)157 329356support@paxtonaccess.frpaxton.support+44 (0)1273 811011paxton.supportsupport@paxton.co.uk +27 (0) 272 14276691support@paxtonaccess.co.zapaxton.support 8000 3570 3783paxton.supportsupport@paxtonaccess.ae+1 (864) 751-3501paxton.soportesoporte@paxton-access.comins-20004.indd 7 25/02/2016 11:26:33
8≤ 1003m - 15m-20°C +55°C 10 ft - 50 ft-4°F +131°FIEEE 802.15.4+44 (0)1273 811011paxton.supportsupport@paxton.co.uk+1(800) 672-7298usapaxton.supportsupportUS@paxton-access.com+49 (0) 251 2080 6900paxton.gmbh.supportsupport@paxton-gmbh.de+31 (0)76 3333 999paxton.benelux.supportsupport@paxton-benelux.com+33 (0)157 329356support@paxtonaccess.frpaxton.support+44 (0)1273 811011paxton.supportsupport@paxton.co.uk +27 (0) 272 14276691support@paxtonaccess.co.zapaxton.support 8000 3570 3783paxton.supportsupport@paxtonaccess.ae+1 (864) 751-3501paxton.soportesoporte@paxton-access.comins-20004.indd 8 25/02/2016 11:26:36
9The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596These products are not suitable for retail sale. All warranties are invalid if these products are not installed by a competent person. North America:- Product Compliance and limitationsThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Changes or modications not expressly approved by the party responsible for compliance could void the user’s author-ity to operate the equipment.The Net2Air Bridge has been designed and complies with the safety requirements for portable (<20cm) RF exposure in accordance with FCC rule part 2.1093 and KDB 447498 D01 as demonstrated in the RF exposure analysis. Installers must ensure that this device must not be co-located or operated in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.The Net2Air Bridge has been designed and complies with the safety requirements for RF exposure in accordance with RSS-102 as demonstrated in the RF exposure analysis.This product should not be installed within 3 metres of other wireless equipment operating on a 2.4Ghz frequency. To ensure optimum performance other wireless networks should avoid WiFi channels 11, 12 and 13 to reduce the possibility of interference.With reference to the signal diagram the unit should be located at a distance as shown within the Green area. Per-formance may be reduced with an increase in distance as shown by the Amber area. The unit should not be used at distances shown by the Red areas. To clear all settings back to their factory default, including clearing the current IP address and setting the bridge to acquire new addresses using DHCP, power on the unit with the reset button held down for 3 seconds. This is located at the rear of the unit through a small hole beneath the power connection. The unit will beep to acknowledge once the reset is complete. FCC ComplianceIC ComplianceInstallation guidelinesData ResetWiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the authorities having jurisdiction.ins-20004.indd 9 25/02/2016 11:26:36
10Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes:(1) ce dispositif ne doit pas causer d’interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l’appareil.Le pont Net2Air a été conçu et est conforme aux exigences de sécurité en matière d’exposition RF conformément aux RSS-102 comme le montre l’analyse de l’exposition aux RF.Ce produit ne doit pas être installé à moins de 3 mètres de tout autre appareil radio fonctionnant sur la fréquence 2.4Ghz. Pour un fonctionnement optimal éviter que d’autres réseaux radio utilisent les canaux WiFi 11, 12 et 13 an de réduire la possibilité d’interférences.En se référant au schéma de signaux, l’appareil doit être située à une distance, comme indiqué dans la zone verte. Le rendement peut être réduit avec une augmentation de la distance, comme indiqué par la zone ambre. L’unité ne doit pas être utilisé à des distances indiquées par les zones rouges.Conformité ICDirectives d’installationCe dispositif est conforme à la section 15 du règlement de la FCC. Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne doit pas créer d'interférences nuisibles et (2) ce dispositif doit accepter toute interférence reçue, y compris des interférences qui peuvent causer un fonctionnement non souhaité. Tout changement ou modi-cation non agréé par la partie responsable de la mise en conformité peut entraîner une interdiction d'utilisation de l'équipement. Les changements ou modications non expressément approuvés par la partie responsable de la conformité peut annul-er le droit de l’utilisateur à utiliser l’équipement.Le pont Net2Air a été conçu et est conforme aux exigences de sécurité pour portable (<20cm) l’exposition aux RF conformément à la règle FCC part 2.1093 et KDB 447498 D01 tel que démontré dans l’analyse de l’exposition aux RF. Les installateurs doivent veiller à ce que ce dispositif ne doit pas être co-implantés ou exploités en conjonction avec une autre antenne ou émetteur, sauf en conformité avec les procédures de produits multi-émetteur FCC.Conformité FCC Conformité et limitations du produitLes méthodes de câblage doivent être en accord avec le code nation électrique (ANSI/NFPA70), codes locaux et les au-torités ayant la juridiction.Pour réactiver les réglages d’usine de l’unité, eacez l’adresse IP stockée dans l’unité et remettez-la en mode DHCP, maintenez appuyé le bouton de réinitialisation pendant que vous mettez l’unité hors tension et sous tension à nouveau. Le bouton de réinitialisation se trouve à l’arrière de l’unité, à travers un petit trou, en dessous de la connexion d’alimentation. L’unité émettra un bip de conrmation, une fois la réinitialisation terminée. Réinitialisation des Donnéesins-20004.indd 10 25/02/2016 11:26:36
This product incorporates work covered by the following copyright and permissions notices:Copyright (c) 2001-2004 Swedish Institute of Computer Science. All rights reserved. Redistribution and use in source and binary forms, with or without modication, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specic prior written permission. Copyright (c) 2013-2015 Atmel Corporation. All rights reserved.Redistribution and use in source and binary forms, with or without modication, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. The name of Atmel may not be used to endorse or promote products derived from this software without specic prior written permission.4. This software may only be redistributed and used in connection with an Atmel microcontroller product.THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEM-PLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.THIS SOFTWARE IS PROVIDED BY ATMEL “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-IN-FRINGEMENT ARE EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUD-ING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.ins-20004.indd 11 25/02/2016 11:26:36
12ins-20004.indd 12 25/02/2016 11:26:36
13ins-20004.indd 13 25/02/2016 11:26:36
14ins-20004.indd 14 25/02/2016 11:26:36
15© Paxton Ltd 1.0.0Made in the UKins-20004.indd 15 25/02/2016 11:26:36

Navigation menu