Paxton Access Z992910 Net2 Decktop Reader USB Multi Format User Manual
Paxton Access Ltd Net2 Decktop Reader USB Multi Format
User Manual
Paxton Access
Ins-30118-US Net2 desktop reader USB - MultiFormat
Desktop Reader
The desktop reader is designed to sit next to the PC. It is used for adding tokens to a Net2 system and also for
identifying lost cards. Additional workstations can also have desktop readers.
With the Net2 software runnng, any new token presented to the desktop reader will cause the new user wizard to
appear with the appropriate card number displayed. The users details can then be entered and the token issued.
If the token is already known to the system, the relevant users’ record will appear.
0AXTON!CCESS
Installation
Plug the reader into a convenient USB port on the PC with the supplied USB cable.
Stop and then restart the Net2 server program. The device will now be available to the Net2 program.
Technical Support
Technical help is available: Monday - Friday from 12:00 AM - 5:00 PM (PST)
Saturday from 1:00 AM - 5:00 AM (PST)
1.800.672.PAXT support@paxton-access.com
Documentation on all Paxton Access products can be found on our web site - http://www.paxton-access.com/
0 °C (32 °F) +55 °C (131 °F)
4.75V DC 5.25V DC
100 mA
4 1/2 inch 3 inch 3/4 inch
The power for the unit is supplied via the USB cable. No additional supply is required.
Voltage
Specications
Operating temperature
Electrical
Environment
Dimensions
Min Max
Width Height
Depth
Current
Waterproof
Min Max
No
USB certied
Download the latest version of Net2 software at: http://paxton.info/1438 before commissioning this product.
The reader will accept:
Paxton tokens
Paxton hands free tokens (passive mode)
Mifare® Classic protocol (ISO 14443A)
Mifare® Ultralight /C
Mifare® Desre
EM4100 tokens
Hitag 1 tokens
This product is not suitable for retail sale. All warranties are invalid if this product is not installed by a competent person.
This unit requires Net2 v4.15 or later software. Please call Technical Support if you require advice.
15/07/2009
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.