0601834b Sempra Sc Spec Sheet

: Pdf 0601834B Sempra Sc Spec Sheet 0601834b_sempra_sc_spec_sheet spec products dual-lite

Open the PDF directly: View PDF .
Page Count: 2

Features

All Models

■ High-strength cast aluminum construction

■ Polycarbonate face shield and tamper resistant

screws supplied standard

■ Compact,low-prolestyle

■ Easy to install

■ Bright, even illumination

■ Red and green letters

■ Long-life LED lamps provide over 20 years of service

■ Energy-saving operation

■ Single and double face models

■ White, white with brushed aluminum face, black and

blackwithbrushedaluminumfacenishesoffered

■ Push-in wiring connectors provided

■ End, ceiling or wall mounting

■ Break-out chevron directional arrows

■ 120/277VAC, 60 Hz operation

■ UL Listed for damp location operation

■ Operating Temperature Ranges:

AC models: -20°C to 50°C (-4°F to 122°F)

Emergency models: 0°C to 40°C (32°F to 104°F)

Emergency models with -XTR option: -20°C to 50°C

(-4°F to 122°F)

Emergency Models

■ Fully automatic, solid-state charger

■ All emergency components mount inside exit housing

■ Maintenance-free, nickel-cadmium battery

■ Operates for a minimum of 90 minutes

■ Automatic battery protection

■ Test switch and AC-On indicator

■ Models available with Spectron self-testing/

self-diagnostic electronics

■ UL 924 Listed

Dimensions

13/4"

(4.4 cm)

91/8"

(23 cm)

10"

(25.5 cm)

113/4" (30 cm)

125/8" (32 cm)

Push-in quick-connect

AC terminals

Isolated,

grounded

120/277VAC

transformer

Charger/transfer module

Universal wall mounting

KO pattern

Wiring

channel

Push-out

chevron-style

directional indi-

cators

Sealed

nickel-cadmium

battery

LED

illumination

strip

SC Series

Cast aluminum exit signs for severe

condition applications featuring

easy installation and energy-

saving, long-life LED lamps

®

Catalog Number

Comments Type

LIFETIME WARRANTY ON

ALL SPECTRON MODELS

Construction

Sign: Housing, exit face(s) and matching canopy constructed of high-strength cast

aluminum

Sign Finish: Textured white, white with brushed aluminum face, black or black with

brushed aluminum face

Diffuser Finish: Frequency-matched silkscreened coating provides optimized LED light

output

Exit Face Design

Letters: 6” letters, 3/4” stroke

Directional Arrows: Break-out chevron type

Illumination

All Models: 4 red or 4 green high-output LEDs

Rated lamp life: In excess of 20 years

Brightness Index: Exceeds UL requirements

Illumination Uniformity: Exceeds UL requirements

Installation

Mounting: Sign mounts to 31/2”, 4” octagon, or 4” square outlet boxes and standard plaster

rings.

Wall Installations: Exit housing provides a knockout pattern for mounting to outlet box.

Ceiling or End Installations: Mounting canopy provided with all models. Canopy mounts

to outlet boxes by means of universal mounting plate supplied. Exit housing

mounts to canopy bracket

Wiring: Pre-stripped AC input pigtail leads provided. Push-in wire connectors supplied for

making AC connections. All wiring dresses into formed wireways in exit housing.

Electronics

Input: 120/277VAC, 60 Hz (all models)

Built-in Protection: Surge, transient and low-battery voltage

Emergency Operation Module (Internally Mounted)

Charger: Solid-state, constant current type

Transfer: Solid-state design

Battery Recharge Cycle: Per UL time standards

Test Means: Integral test switch

Indicators: AC-On LED indicator

Operating Temperature Ranges:

AC models: -20° to 50°C (-4°F to 122°F)

Emergency models: 0° to 40°C (32°F to 104°F)

Emergency models with -XTR option: -20° to 50°C (-4°F to 122°F)

Battery Type: Maintenance-free nickel-cadmium

Power Consumption*

120VAC 277VAC

Red AC Only Models: 2.6 watts 2.6 watts

Green AC Only Models: 2.1 watts 2.1 watts

Red Emergency Models: 3.8 watts 3.8 watts

Green Emergency Models: 3.5 watts 3.5 watts

*WattageguresincludeLEDlamps,transformerandelectronicspowerrequirements.

LED lamp assemblies (red or green) consume less than 1 watt.

Power factor, average: .8 (lagging)

Specifications SC Series

Cast Aluminum LED Exit Signs

Product Selector (Single Face Models)

AC Emergency Colors

Model Model Exit Stencil

Numbers Numbers Letters Housing Face(s)

SCSRW SCSRWE Red White White

SCSGW SCSGWE Green White White

SCSRWN SCSRWNE Red White Brushed

SCSGWN SCSGWNE Green White Brushed

SCSRB SCSRBE Red Black Black

SCSGB SCSGBE Green Black Black

SCSRBN SCSRBNE Red Black Brushed

SCSGBN SCSGBNE Green Black Brushed

Product Selector (Double Face Models)

AC Emergency Colors

Model Model Exit Stencil

Numbers Numbers Letters Housing Face(s)

SCDRW SCDRWE Red White White

SCDGW SCDGWE Green White White

SCDRWN SCDRWNE Red White Brushed

SCDGWN SCDGWNE Green White Brushed

SCDRB SCDRBE Red Black Black

SCDGB SCDGBE Green Black Black

SCDRBN SCDRBNE Red Black Brushed

SCDGBN SCDGBNE Green Black Brushed

Options and Accessory Items

Factory Equipped Field Conversion Kit

Descriptions Add Suffix To Model Order Part Number

Spectron self-testing/self-diagnostic option I —

Remote DC operation(1)(5)(6) -DC —

2-circuit operation(1)(6) -2C —

Extreme temperature option(2)(3) -XTR —

Fire alarm panel interface(4)(6) -FAP —

Flasher module(2)(3)(6) -FM —

Audible/Flasher module(2)(3)(6) -AF —

220/240 VAC, 60 Hz operation -24K —

Pendant mounting kit (white) — PMCW

Pendant mounting kit (black) — PMCB

Wire guard (Wall mount) — WGLX

Wire guard (Wall mount) — WG-MLT

Wire guard (Ceiling mount) — WGLXC

Wire guard (End mount) — WGLXE

(1) For use with AC models only.

(2) For use with emergency models only.

(3) Not for use with Spectron models.

(4)Operateswith24-voltACorDCrealarmpanels.

(5) For emergency illumination of sign from remote 6-24 VDC power sources.

(6) -DC,-2C,-FAP,-2CFAP,XTRFAP,-FM,-AFoptionsmaynotbespeciedtogether.

Compliances

UL 924 (exceeds brightness and uniformity requirements and meets 2001 directional

indicatorspecications)

UL 924 Damp Location Listing

NFPA-101

Warranty

Spectron Self-Testing/Self Diagnostic Sempra Models

Electronics, LED Illumination Strip and Battery: Lifetime

All Other Sempra Models

LED Illumination Strip: Lifetime

Unit and Electronics: 5 years full

Battery: 1 year full, 9 years pro-rata (10 years total)

This warranty only applies when the product is used as intended. Any abuse or misuse

contrary to normal installation or operation shall void this warranty.

Suggested Specification

Exit sign construction will be high-strength cast aluminum in textured (white)(white with

brushedface)(black)(blackwithbrushedface)nish.AllSempraSCSeriesmodelswill

include a polycarbonate shield for the exit face held in place by four tamper resistant

screws for additional vandal protection. Exit face will provide 6” high letters with 3/4”

stroke and break-out chevron type directional arrows. Exit sign design will allow universal

120/277VAC, 60 Hz operation. Normal illumination will be provided by 4 red or green high-

output LEDs consuming less than 1 watt at 120 or 277VAC. Normal LED lamp life will be

in excess of 20 years. Exit letters will exceed the lumen output and illumination uniformity

requiredbyULspecications.Exitswillbe(singleface)(doubleface)andprovidedwithall

necessary components for wall, ceiling or end mounting applications. Mounting canopies

will be provided with all models and will be of identical construction and color to match the

exit frame. Exits will be designed to mount to 31/2” or 4” octagon and 4” square electrical

boxes or standard plaster rings. Emergency exit models will be achieved through a factory

installed fully automatic emergency operation module. All emergency module components

will mount inside the exit housing and will include a solid-state, constant current type

battery charger; a maintenance-free, nickel-cadmium battery; an AC-On indicator light; and

a test switch. The unit charger will be capable of recharging the battery within acceptable

UL time standards. The emergency operation module must be capable of providing a

minimum of 90 minutes of emergency operation. Exit signs must comply with all UL 924,

UL 924 Damp Listing and NFPA 101 Life Safety Code requirements. Optional equipment

will include:___________________

Dimensions to be 91/8” (23 cm) high x 113/4” (30 cm) wide by 13/4” (4.4 cm) deep.

®

Dual-Lite • www.dual-lite.com

A Hubbell Lighting, Inc. brand with representatives’ offices in principal cities throughout North America.

Copyright © Hubbell Lighting, Inc., All Rights Reserved • Specications subject to change without notice. • Printed in U.S.A. 0601834_B 9/10