091569 003 Dover Kip Cot White_IM White IM
User Manual: Pdf 091569-003 Dover Kip Cot - White_IM
Open the PDF directly: View PDF 
.
Page Count: 12
IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
Dover Kip
Cot “White”
#091569-003
2
Read all instructions before assembly and use of the cot. Keep
instructions for future use.
ADULT ASSEMBLY REQUIRED:
DUE TO THE PRESENCE OF SMALL PARTS DURING ASSEMBLY, KEEP OUT OF REACH OF
CHILDREN UNTIL ASSEMBLY IS COMPLETE.
TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE ADJUSTED TO THE LOWEST
POSITION BEFORE THE CHILD CAN SIT UP.
RECOMMENDED MATTRESS SIZE:
690 MM WIDE X 1300 MM LONG X 100 MM-150 MM THICK.
FOLLOW THE MANUFACTURER’S ASSEMBLY INSTRUCTIONS TO ENSURE THE SAFETY FEATURES
OF THE COT ARE NOT COMPROMISED.
SAFETY PRECAUTIONS
WARNING
This cot has been manufactured for one child only, with a maximum weight of 18kgs in cot conguration.
When the mattress base is assembled in the lower position, ensure the higher cot base holes are covered
tightly with the lling bolts supplied. This is to prevent nger entrapment, swallowing and inhalation hazards.
ENSURE the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.
ENSURE the cot is completely assembled and check that all parts are securely tightened before placing the
child into the cot.
ENSURE medication, string, elastic, small toys or small items such as money etc are always kept out of the
child’s reach when in the cot.
DO NOT over tighten bolts/screws.
ENSURE that the child is clear of any moving parts when adjusting the cot.
For warranty purposes, keep your sales receipt to provide proof of purchase.
RECOMMENDED MATTRESS SIZE (SOLD SEPARATELY):
THIS COT HAS BEEN MANUFACTURED FOR USE WITH A MATTRESS WHICH MEASURES 1300MM LONG BY 690
MM WIDE AND 100-150 MM IN THICKNESS.
The width and length are specied because it is important that the gaps between the mattress and the sides
and ends of the cot will not exceed 40 mm when the mattress is pushed to one side or end, and 20mm when
the mattress is centred in the cot.
This is to minimise the danger of a child ‘s limb becoming caught in the gap.
The thickness of the mattress has been specied to ensure that the depth of the cot is greater than 500 mm
with the mattress base in the lower position and is greater than 300mm with the mattress base in the upper
position, to minimise the risk of a child climbing or falling out of the cot.
3
Due to variations in the style and design of our products, the photographs and illustrations shown in this
instruction manual are generic, therefore product fabrics, colour and design may vary from images shown.
CNP Brands reserves the right to alter product specications without notice as a result of our ongoing
policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Childcare Dover Kip Cot
Congratulations on your purchase of the Childcare
Dover Kip Cot - White.
This product has been designed and developed with safety,
comfort and functionality in mind. Please take the time to read
this manual carefully before using this product and keep it in a
safe place for future reference.
CONGRATULATIONS
4
ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the
box against the list below. If anything is missing, please contact
Customer Service.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
End Panel x 2
x 2
x 4 x 1
x 1
x 12
Filler Bolt and Nut
(Pre-assembled) Allen Key
Mattress Base
32mm Bolt
Side Panel
Recommended use with 115282-003 Inner Spring Mattress - White.
5
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Cot...
1
2
3
Attach both End Panels to one Side Panel using
4 x 32mm bolts.
Tighten Until Firm.
Cot should now resemble photo opposite.
Carefully lay the cot down on the Side Panel.
1a.
1b.
2a.
3a.
It is advisable that two people assemble the cot in the room in which it is to be
used.
As small parts are involved in assembly, children should be kept clear of the
assembly area.
Dispose of all packaging material immediately after the cot is assembled.
Identify all parts and components.
Clear an area on the oor for assembly and place a sheet on the oor to ensure
the cot is not scratched during assembly.
a.
b.
c.
d.
e.
DO NOT OVER TIGHTEN BOLTS. OVER TIGHTENING BOLTS CAN CAUSE PANELS TO CRACK.
WARNING
NOTE: Ensure that the bolt recesses are facing out.
6
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Cot continued...
4
6
8
5
Slide the Mattress Base between the End Panels.
Carefully stand the cot upright.
Attach the remaining Side Panel between the
End Panels using 4 x 32mm bolts.
Secure the Mattress Base using 4 x 32mm bolts.
Do not tighten completely.
4a.
6a.
8a.
5a.
5b.
NOTE: Ensure that the “This Side Up” is facing the top of the cot.
9Tighten all bolts until rm.
Do not over tighten bolts. Over tightening bolts can
cause panels to crack.
9a.
9b.
The cot is now ready for use for high base mode.
7
ASSEMBLY / OPERATING INSTRUCTIONS
Mattress Base Heights...
Mattress Base in High Position
The base height is set for when your baby is young and cannot sit up
unaided.
Mattress Base in Low Position
This is the normal position for an active baby who can sit up unaided.
To adjust Mattress Base Height...
1
2
Carefully lay the cot down on the Side Panel.
Remove the 4 x Filler Bolts and Nuts for the lower
base position on the End Panels.
Remove 4 x 32mm Mattress Base bolts.
1a.
1b.
2a.
8
ASSEMBLY / OPERATING INSTRUCTIONS
5
4Ret 4 x Filler Bolts and Nuts to the upper Mattress Base
Mounting holes to prevent possible nger entrapment.
Carefully stand the cot upright. 5a.
4a.
The cot is now ready for use for low base mode.
To adjust Mattress Base Height continued...
3Carefully slide the Mattress Base to the lower
position and attach with 4 x 32mm bolts.
3a.
9
HOW TO CARE FOR YOUR CHILDCARE COT
Cleaning
Maintenance
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully
before using this product and keep it in a safe place for future reference.
To ensure the long-lasting use of your cot, wipe down with a damp cloth
and use a mild soap solution if necessary. Do not use abrasive cleaners.
Always store product in a clean dry place.
Always check parts regularly for tightness of screws, nuts and other
fasteners – tighten or replace if required. To maintain the safety of your cot,
seek prompt repairs for bent, torn, worn or broken parts. Use only those
parts and accessories approved by CNP Brands.
If you have any difculties in assembling the stroller, please contact our
Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.
10
ABOUT US
About CNP Brands
Currently, CNP Brands boasts one of the most diverse brand portfolios
with a combination of company owned brands and distribution
agreements. These include distribution lines for 4moms, Cybex,
Eveno, Good Baby, Lascal, Maclaren, Motorola, OiOi and Summer
Infant.
Our own brands, including Childcare, have gone from strength to
strength in recent years. Childcare, and our premium brand bebe
care, demonstrate our commitment to quality and continuing
investment in product development.
11
Distributed in Australia by CNP Brands
20 Calarco Drive,
Derrimut, VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: info@cnpbrands.com.au
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse
Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000
E: helpline@wainhousedist.co.nz
