Open Frame Systems
2016-08-16
: Pdf 1000317989-Attachment 1000317989-Attachment B3 unilog
Open the PDF directly: View PDF 
.
Page Count: 4
OPEN FRAME RACKS Open Frame SyStemS
Spec-00705 F
EQUIPMENT PROTECTIONSUBJECT TO CHANGE WITHOUT NOTICENETWORKING1
SPEC-00705
F
763.422.2211
763.422.2600
NETWORKING
OPEN FRAME R ACKS
OPEN FRAME SYS TEMS
MAXRACK OPEN FRAME SYSTEM
INDUSTRY STANDARDS
UL 2416 Listed; File Number E230874
cUL Listed per CSA C22.2 No. 182.4; File No. E230874
Cisco developer registered
EIA 310-D
APPLICATION
MAXRACK is used for mounting and securing 19- or 23-in. rack
equipment that is used innetwork, server, and telecommunication
rooms. These open frame racks are ideal for high-density cabling
applications. MAXRACK also supports the cabling and cooling
needs of large core switches (CISCO Catalyst 6509 / 6513, NEXUS
7010 and NEXUS 7018) by using the combination air baffle/vertical
cable manager accessory. MAXRACK, with its vast features,
supports many diverse applications.
FEATURES
• Rack can be assembled to accommodate either 19- or 23-in. rack
equipment
• Racks can be ganged to create rows for high density applications
• 19-in. configuration equals typical tile width of 24 in.
• Flat package to allow easy shipping and handling to job site
• Press-in nuts enable single-side easy assembly
• All structural members are grounded by special grounding and
bonding washers
• Top has integrated waterfall, which ensures proper cable radius
is achieved
• Top and top bracket support accomodate parallel or
perpendicular ladder or basket tray mounting applications
• Channel uprights provided with hole patterns to support various
cable management devices
• All RU positions marked with white lettering on front and rear
column members
• Easy-to-follow complete installation instructions included
• Upright channels tapped 12-24 holes per EIA Universal pattern
standards
• Multiple paint-free grounding points per UL double-lugged
standards
• Rack accommodates vertical cable manager accessories
SPECIFICATIONS
• Top and uprights made of multi-formed .125-in. aluminum
• Base angles made of extruded aluminum
• White RU-marked uprights per EIA standards
• Tapped 12-24 holes per EIA Universal pattern standards
LOAD RATING
Static maximum load is 2500 lbs/1134 kg.
ACCESSORIES
Vertical Cable Managers
Blanking Panels
Grounding kits
PDUs
Shelves
BULLETIN: DMAX
Standard Product MAXRACK Open Frame System
Catalog Number AxBxC in. AxBxC mm Rack Units G (in.) G (mm) K (in.) K (mm)
M846B45 86.13 x 24.00 x 16.50 2188 x 610 x 419 45 14.00 356 6.50 165
M8410B45 86.13 x 24.00 x 20.50 2188 x 610 x 521 45 18.00 457 10.50 267
M8416B45 86.13 x 24.00 x 26.25 2188 x 610 x 667 45 23.75 603 16.25 413
M8432B45 86.13 x 24.00 x 41.75 2188 x 610 x 1060 45 39.25 997 31.75 806
M966B51 98.13 x 24.00 x 16.50 2493 x 610 x 419 51 14.00 356 6.50 165
M9610B51 98.13 x 24.00 x 20.50 2493 x 610 x 521 51 18.00 457 10.50 267
M9616B51 98.13 x 24.00 x 26.25 2493 x 610 x 667 51 23.75 603 16.25 413
M9632B51 98.13 x 24.00 x 41.75 2493 x 610 x 1060 51 39.25 997 31.75 806
OPEN FRAME RACKS Open Frame SyStemS
Spec-00705 F
EQUIPMENT PROTECTIONSUBJECT TO CHANGE WITHOUT NOTICENETWORKING3
MAXRACK AIR BAFFLE AND CABLE MANAGERS FOR
CISCO SWITCH
MAXRACK Air baffle and Vertical Cable Manager accessory kits
ensure CISCO switch compliance. Managers provide the required
cold air access and provisions for high-density cabling. Baffles and
cable manager uprights made of aluminum; supporting fingers
made of composite. Finish is RAL 9005 black light-textured, low-
gloss polyester powder paint.
Cisco developer registered.
BULLETIN: DMAX
$
%
&
Standard Product MAXRACK Air Baffle and Cable Managers for CISCO Switch
Catalog Number AxBxC in./mm Use with CISCO Switch Use with MAXRACK
M84D12 84.13 x 12.00 x 23.68
2137 x 305 x 601
Catalyst 6509/6513 M8416B45
M84D18 84.13 x 18.00 x 39.37
2137 x 457 x 1000
NEXUS 7018 M8432B45
M96D12 96.13 x 12.00 x 23.68
2442 x 305 x 601
Catalyst 6509/6513 M9616B51
M96D18 96.13 x 18.00 x 39.37
2442 x 457 x 1000
NEXUS 7018 M9632B51
OPEN FRAME RACKS Open Frame SyStemS
Spec-00705 F
PH 763.422.2211 • • FAX 763.422.2600 • • PENTAIRPROTECT.COMEQUIPMENT PROTECTION NETWORKING 4
MAXRACK DUST COVER
Dust Cover fits over the top of the base angles, inside the uprights.
Covers are made of aluminum with matching RAL 9005 black light-
textured, low-gloss polyester powder paint.
BULLETIN: DMAX
Standard Product MAXRACK Dust Cover
Catalog Number AxBxC in./mm MAXRACK C dimension
MDC6 1.00 x 17.95 x 7.33
25 x 456 x 186
16.50 (419 mm)
MDC10 1.00 x 17.95 x 11.33
25 x 456 x 288
20.50 (521 mm)
MDC16 1.00 x 17.95 x 17.08
25 x 456 x 434
26.25 (667 mm)
MDC32 1.00 x 17.95 x 32.58
25 x 456 x 828
41.75 (1060 mm)
MAXRACK HARDWARE KIT
Kit consists of (20) 12-24 x .625 pilot point screws; (16) 3/8-16 x .88 hex head bolts; (16) M10 grounding washers; (16) 3/8 flanged nuts; and
(1) Mx12 flat head screw.
BULLETIN: DMAX
Standard Product
Catalog Number Description
MAXKIT MAXRACK hardware kit
MAXRACK ISOLATION KIT
Kit consists of (2) isolator bases and (4) nylon bushings.
BULLETIN: DMAX
Standard Product
Catalog Number Description
MSOK MAXRACK Isolation Kit
