1000328642 Catalog
2016-08-17
: Pdf 1000328642-Catalog 1000328642-Catalog B3 unilog
Open the PDF directly: View PDF 
.
Page Count: 260 [warning: Documents this large are best viewed by clicking the View PDF Link!]
The SMART
CHOICE for a
Better Network
2014 - Catalog
NEW PRODUCTS
INTACT™ INTELLIGENT
PORT MANAGEMENT SYSTEM
See Page E3
HDF3168 DISTRIBUTION SYSTEM
See Page B7
OPT-X HD ENCLOSURE SYSTEM
See Page B11
RF TRANSPARENT
ENCLOSURE
See Page F11
GIGABIT ROUTER
See Page F13
OPT-X®
SPLICE MODULES
See Page B25
HIGH-FLEX HD6 PATCH CORD
See Page A29
HIGH-DENSITY SMALL FORM FACTOR
SHIELDED CONNECTORS
See Page A40
1
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
ABOUT US
The Smart Choice for a Better Network 4
Make-to-Order (MTO) Program 10
Enterprise Solutions 12
Data Center Solutions 14
COPPER SOLUTIONS
Copper Systems A3
Patch Panels A11
Cross Connect A21
Patch Cords & Cable Assemblies A27
Category-Rated Connectors A35
A/V Connectivity A41
Wallplates & Housings A47
Copper Tools & Labeling A65
FIBER SOLUTIONS
Common Configurations B3
HDF3168 Distribution System B7
Opt-X® HD B11
Opt-X B15
e2XHD B27
LightSpace®B31
Flush-Mount Panels B39
Equipment-Specific Solutions B41
Pre-Terminated
Cable Assemblies & Patch Cords B45
Connectors & Housings B59
Tools & Consumables B67
CABLE MANAGEMENT
Overhead Infrastructure Platform C3
Fiber Raceway System C5
Versi-Duct® System C13
Cable Managers & Accessories C15
VELCRO® Brand Fasteners C19
Zone Enclosures C21
POWER SOLUTIONS
Power Distribution Units (PDUs) D3
MANAGED SOLUTIONS
Intact™ Intelligent Port
Management System E3
MDU SOLUTIONS
MDU Systems F3
Structured Media®F7
Audio F27
TECHNICAL INFORMATION
Web-Based Resources X3
Wiring Standards X4
Termination Instructions X7
Splice Tray Selection Guide X13
Product Update X14
Product & Applications Standards X15
Term Index X17
Part Number Index X23
CATALOG CONTENTS
GLOBAL SALES OFFICES
13
COUNTRIES
80
MANUFACTURING FACILITIES
12
TECHNICAL RESOURCES
Application / Tech Notes leviton.com/ns/techlibrary
Detailed Termination Diagrams leviton.com/ns/techlibrary
Dimensional Line Art leviton.com/ns/techlibrary
Manuals & Guides leviton.com/ns/techlibrary
Training Videos leviton.com/ns/techlibrary
BIM Objects leviton.com/bim
Visio Stencils leviton.com/visio
PROGRAMS
Contractor leviton.com/ns/contractors
Consultant Connection leviton.com/networkconsultant
Network Technology Alliances leviton.com/alliances
SUPPORT TEAMS
Technical Support 800.824.3005 \ +1.425.486.2222
appeng@leviton.com
Inside Sales/Customer Service 800.722.2082 \ +1.425.486.2222
insidesales@leviton.com
Specification Team leviton.com/specteam
specteam@leviton.com
Government Team leviton.com/gov
Data Center Team leviton.com/datacenter
dcteam@leviton.com
WEB SUPPORT
Make to Order (MTO) leviton.com/configurator
Structured Media® Planning Worksheet leviton.com/homeconfig
Independent Testing Information leviton.com/ns/testresults
Literature Library leviton.com/ns/litlibrary
Live Chat leviton.com/support
Knowledgebase & Forums communities.leviton.com
CrossTalk Newsletter leviton.com/crosstalk
Leviton Wired blog.leviton.com/network-solutions
3
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
THANK YOU for choosing Leviton Network Solutions. For the past quarter century
we have developed an unparalleled selection of high-performance connectivity
solutions and systems for enterprise, data center, government, residential,
and other markets around the globe.
Leviton manufactures nearly all of its branded products at 12 COMPANY-OWNED
MANUFACTURING FACILITIES; the majority are made in the United States at facilities
colocated with our product development teams.
We support customers around the world with 13 GLOBAL SALES OFFICES and
installations of Leviton Network Solutions PRODUCTS IN MORE THAN 80 COUNTRIES.
OUTSTANDING
RETURN ON
INVESTMENT
COMMITTED TO
OUR CUSTOMERS &
THE ENVIRONMENT
QUALITY & PERFORMANCE
IN EVERY SOLUTION
A CULTURE OF
INGENUITY & INNOVATION
THE INDUSTRY'S BEST
SERVICE & SUPPORT
THE SMART CHOICE
FOR A BETTER NETWORK
THE SMART CHOICE
At Leviton, we understand that the best value comes
from more than a high-quality, affordable product – it
means delivering peace of mind. With unbeatable service,
best-in-class support, and the reassurance that comes
from working with a stable, century-old supplier, you get far
and away the highest return on investment in the industry.
Leviton invents the industry’s best technologies. We build
them to last, and we back them up with incredible service
and support. Whatever your need, Leviton can provide it,
and we will stand behind it.
OUTSTANDING RETURN
ON INVESTMENT
COMMITTED
TO OUR
CUSTOMERS
& THE
ENVIRONMENT
QUALITY & PERFORMANCE
IN EVERY SOLUTION
A CULTURE OF
INGENUITY & INNOVATION
THE INDUSTRY'S BEST
SERVICE & SUPPORT
THE SMART
CHOICE FOR A
BETTER NETWORK
5
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
A NAME YOU CAN TRUST
Leviton is the world’s largest privately held producer
of electrical and data connectivity devices. We’ve been
serving customers from the electrical age through the
information age, and we’ll be here through the life of
your installation – and beyond.
CUSTOMERS AROUND THE WORLD
Thousands of organizations all across the globe have
installed Leviton Network Solutions copper and fiber
infrastructure systems. With distribution locations on
nearly every continent, we’re ready to serve customers
in every location and every industry.
CREATING A SUSTAINABLE FUTURE
The Leviton “Go Green” initiative provides a framework for
reducing our environmental impact. Monitoring energy use,
recycling scrap metal, and re-using leftover plastics are just
a few examples of how Leviton helps to keep our world clean.
6LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
OUTSTANDING RETURN
ON INVESTMENT
COMMITTED TO
OUR CUSTOMERS &
THE ENVIRONMENT
QUALITY &
PERFORMANCE IN
EVERY SOLUTION
A CULTURE OF
INGENUITY & INNOVATION
THE INDUSTRY'S BEST
SERVICE & SUPPORT
THE SMART CHOICE
FOR A BETTER NETWORK
MANUFACTURING EXCELLENCE
Our products feature durable construction that reduces maintenance and downtime,
with headroom that exceeds standards to boost network performance. We manufacture
nearly all of our branded products at company-owned, ISO 9001-2008 certified
plants. We ensure product designs are robust and reliable by using trusted quality
methods, and all Leviton products include a workmanship warranty, guaranteeing
material and manufacturing quality. Finally, limited lifetime performance warranty
coverage is available when your system is installed by a Leviton certified contractor,
protecting your investment and providing peace of mind.
INDUSTRY-LEADING INVENTIONS
At Leviton, we’re continuously inventing the solutions that
drive next-generation networks, developing innovative
solutions that raise the bar on performance and aesthetics.
Engineers within our collaborative “Development Factory”
have built an extensive patent portfolio with performance,
design, and process enhancements that improve product
functionality and deliver fast, reliable networks.
OUTSTANDING RETURN
ON INVESTMENT
COMMITTED TO OUR
CUSTOMERS & THE
ENVIRONMENT
QUALITY & PERFORMANCE
IN EVERY SOLUTION
A CULTURE
OF INGENUITY
& INNOVATION
THE INDUSTRY'S BEST
SERVICE & SUPPORT
THE SMART CHOICE
FOR A BETTER NETWORK
RCDD and CSI-certified Specification Engineers can take you through
the entire specification process, ensuring that your equipment will
provide optimal performance and comply with industry standards.
The Leviton U.S. Government Team
can provide the contacts, product
knowledge, and support services you
need to build successful government
project installations in that very
specialized network environment.
WITH OUR MULTI-TIERED SUPPORT STRUCTURE
YOU GET THE NUMBER-ONE RANKED SERVICE
IN THE INDUSTRY. THAT MEANS YOU CAN CALL
ON A VARIETY OF LEVITON EXPERTS TO HELP
YOU WITH EACH AND EVERY PROJECT.
Network Consultants provide
exclusive information and support
for all Leviton products, delivering
the solution-oriented expertise
you need to take your projects
to the next level.
OUTSTANDING RETURN
ON INVESTMENT
COMMITTED TO
OUR CUSTOMERS &
THE ENVIRONMENT
QUALITY & PERFORMANCE
IN EVERY SOLUTION
A CULTURE OF
INGENUITY & INNOVATION
THE INDUSTRY'S
BEST SERVICE
& SUPPORT
THE SMART CHOICE
FOR A BETTER NETWORK
Technical Support Representatives can assist with product
and network troubleshooting, whether over the phone or
through our online live chat. More than 90% of tech support
issues are resolved on the first call.
Count on an experienced Leviton
Certified Contractor to deliver the
highest-quality installations. They
are authorized to oer extended
product and performance warranties
on qualified projects.
Knowledgeable and friendly
Inside Sales Representatives will
answer questions about your purchase,
get you a quote on a product, or
direct you to the right field support
or distributor in your city.
Applications Engineers
and Data Center Specialists assist
with topology, layout, elevations, and
pathways. They're ready to help through
remote or on-site network analysis,
and are able to deliver custom product
designs with a fast turnaround time.
9
LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
Our team of Global Account Managers
will work in tandem with customer
service to deliver the products
and support you need, just about
anywhere in the world.
CUSTOMIZABLE SOLUTIONS
Building the exact product you need is quicker
and easier than ever. Rely on our innovative online
custom configurators for a variety of fiber, copper,
and power distribution products.
HOW IT WORKS: To configure a product, go to
leviton.com/configurator and choose from a
wealth of options (e.g., fiber type, cable length,
polarity, etc.). Take the resulting model number
or part number and submit your quote request to
Leviton inside sales or your local Leviton distributor.
You can expect 24-hour turnarounds
on all quote requests.
Look for the “Make to Order!”
icon throughout this catalog
to identify products with
online configurators.
10 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
11
LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
COPPER SOLUTIONS
Customize and order trunk cables and Secure RJ Patch Cords.
• Pre-Terminated Copper Trunks - CAT 6A/6/5e
• Pre-Terminated Copper Trunks with e2XHD cassettes
• Secure RJ Patch Cords - CAT 6A/6
• Patch Cords - CAT 6A/6/5e
• Intact™ Intelligent Copper Patch Cords - CAT 6A/6
POWER SOLUTIONS
FLX PDUs are available in 127 configurations and a wide selection
of input plugs and output receptacles that meet both NEMA
and IEC standards. Most configurations can be manufactured
in 5 days or less for quantities of up to 25 units.
• 120V, 208V Single-Phase,
and 208V 3-phase (WYE or Delta) options
• 12 input plug options
• Output power options ranging from 2.0 kW to 12.5 kW
FIBER SOLUTIONS
Customize and order fiber panels, enclosures, cassettes,
trunk cables, harnesses, and patch cords.
• Opt-X® Rack-Mount & Wall-Mount Enclosures
• LightSpace® Rack-Mount & Wall-Mount Enclosures
• Fiber MTP® Cassettes
• e2XHD MTP Fiber Cassettes
• Fiber MTP Harnesses
• Pre-Terminated Fiber Trunks
• Premium Series Fiber Optic Patch Cords
• Economy Fiber Optic Patch Cords
• Intact Intelligent Fiber Patch Cords
WALLPLATES & HOUSINGS
Extensive selection to
customize work area outlets
8
ENTERPRISE SOLUTIONS
Leviton provides high-performance copper, fiber, and power
network connectivity for enterprise applications around the
globe, all backed by the industry’s best service and support.
Leviton is the smart choice for a better network.
ZONE ENCLOSURES
Easily accessible for simple
moves, adds, and changes
12
PATCH PANELS
Wide selection of styles: flat, angled, and recessed
in UTP and shielded
HORIZONTAL & VERTICAL CABLE MANAGEMENT
Organize and support cables, patch cords, and equipment
7
FIBER OPTIC ENCLOSURES
Broad selection to address any fiber density requirements
6
DATA CONNECTORS
Fast, reliable category-rated
and optical fiber connectors
5
1
3
13
LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
10
OPTICAL SPLICE ENCLOSURES
Transitions from outside plant
cable to inside plant cable
A/V CONNECTIVITY
For high-quality multimedia applications
4
3
PATCH CORDS
Include snagless design
and strain-relief boot
for long-term performance
POWER DISTRIBUTION UNITS (PDUs)
Robust, reliable power
to rack and cabinet applications
9
2
4
5
6
7
8
910
HIGH-DENSITY PATCHING SYSTEM
Fast deployment and simple maintenance
1
REPLICATOR® ENCLOSURES
Unique logical port management
design can be configured to
replicate any switch
2
INTACT™ INTELLIGENT PORT MANAGEMENT SYSTEM
Real-time network documentation with alerts
for faults or unplanned changes
8
40/100G MTP® SYSTEMS
Ideal migration path to
40/100G speeds
7
1
8
3
2
7
5
6
4
9
10
15
LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
DATA CENTER SOLUTIONS
Leviton solutions cover every area of the data center
– from the entrance room and computer room to the
telecommunications room (TR) and support offices –
and our data center experts are always available to
provide in-depth technical and design support.
FIBER OPTIC SYSTEMS
High-density enclosures can be custom
configured with cassettes, adapter
plates, and pre-terminated solutions
9
POWER DISTRIBUTION UNITS
Provide reliable power distribution
into racks and cabinets with
outlet power ranging from 2.0 kW
to 12.5 kW
10
CABLE MANAGEMENT
Vertical/horizontal cable management for standard
equipment racks and large-scale deployments
3
SECURE CONNECTIVITY
Physical port security with copper
RJ and fiber LC assemblies
4
PRE-TERMINATED COPPER AND FIBER TRUNKS
Provide backbone connections between entrance
facility, MDA/Core, SAN, and HDA
6
HDF3168 DISTRIBUTION SYSTEM
Used in MDA to consolidate
patching and reduce footprint,
freeing up valuable space
5
A1
COPPER SOLUTIONS
SECTION
A
A2
SECTION ACONTENTS
CATEGORY-
RATED
CONNECTORS
A35 Introduction
A36 QuickPort UTP Highlighted Features
A37 UTP QuickPort Connectors
A39 UTP USOC QuickPort Connectors
& Connector Adapter Bezels
A40 Shielded QuickPort Connectors
A/V
CONNECTIVITY
A41 Introduction
A42 A/V Connectors & Adapters
A45 Multimedia Outlet System
WALLPLATES
& HOUSINGS
A47 Introduction
A48 QuickPort Wallplates
A51 QuickPort Decora® Inserts
& Floor Box Assemblies
A52 Renu® Wallplates & Inserts
A53 QuickPort Boxes, Modules & Accessories
A55 DuraPort® Industrial Connectivity
A57 86 mm x 86 mm Int'l Wallplates & Inserts
A59 Telephone & Video Wallplates & Inserts
A61 Round Telephone Inserts
& Surface-Mount Boxes
A62 Telephone Wall-Phone Jacks
A63 Decora Wallplates
A64 Duplex, Round Opening
& Blank Wallplates
COPPER TOOLS
& LABELING
A65 Introduction
A66 Punchdown, Termination & Test
A68 Labeling Solutions
COPPER
SYSTEMS
A3 eXtreme® CAT 6A UTP System
A5 eXtreme CAT 6+ UTP System
A6 GigaMax® CAT 5e+ UTP System
A7 Shielded Connectivity Systems
A8 e2XHD Patching System
A9 QuickPort® Data & A/V Solutions
A10 Multimedia Outlet System
PATCH PANELS A11 Introduction
A12 Selection Guide
A13 Flat Metal 110-Style
A14 Flat C1 Ultra Composite
A15 Flat Metal QuickPort
A16 Angled 110-Style & QuickPort
A17 Recessed-Flat & Angled
110-Style & QuickPort
A18 e2XHD Patching System
A19 VertiGO® Zero-U QuickPort & Opt-X®
A20 Telco Data & Voice Grade
Panels/Labeling Solutions
CROSS
CONNECT
A21 Introduction
A22 CAT 6A & 6 110-Style
Wiring Products
A23 CAT 5e 110-Style
Wiring Products
A25 110-Style Wiring
Cable Management
A26 66 Blocks & Accessories
PATCH CORDS
& CABLE
ASSEMBLIES
A27 Introduction
A28 CAT 6A/6/5e Patch Cords
A30 MTO & Special Order
A31 Pre-Terminated Trunks
A33 Secure RJ System
EXTREME® CAT 6A UTP SYSTEM
The eXtreme CAT 6A UTP System delivers exceptional electrical performance and superior flexibility to meet
10GBASE-T Ethernet requirements in any environment. Component-rated connectors, patch panels, and cords
support server to switch applications in server rows for data center, financial, health care, government, education,
transportation, or other demanding applications. Best of all, Leviton oers a limited lifetime product and
performance warranty on certified CAT 6A installations.
• Independently verified and guaranteed by Intertek (ETL) to exceed ANSI/TIA-568-C.2 component, permanent link,
and channel margins, and IEEE 10GBASE-T (802.3an) requirements, as well as the ISO/IEC 11801 2nd Edition,
CAT 6A component, and Class EA standard
• Guaranteed permanent link electrical performance at distances as short as 10 feet, with approved cable
• Triple-stage compensation with multiple patented design features enhances permanent link and channel
margin performance and suppresses alien crosstalk (AXT)
• AXT field testing not required with approved cables
• Backward compatible with CAT 6 and 5e systems, 1GBASE-T and 100BASE-T applications
• Provides a seamless migration path to 10GBASE-T performance to maximize return on infrastructure investment (ROii™)
• Limited lifetime warranty on qualified installations
CAT 6A INDEPENDENT 3RD PARTY (ETL) TEST RESULTS
COPPER SYSTEMS | CAT 6A
Leviton Worse Case Performance
Leviton Average Performance
TIA Standard
100
80
60
40
20
0
0 25 50 75 100
Pass
Fail
Margin
A3 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
copper systems
COPPER
COPPER SYSTEMS | CAT 6A
EXTREME® CAT 6A QUICKPORT® CONNECTORS
(See page A37)
All eXtreme 6A connectors deliver ease-of-use and
superior performance:
• Patented Cone of Silence® helps suppress AXT
• Patented Retention Force Technology (RFT) protects
against damage from 4- or 6-pin plugs
• Pair Separation Towers facilitate quick,
eective termination
• Patented dual-layer T568A and T568B label
with larger wiring diagrams
eXtreme 6A component-rated UTP connector adds
several exclusive performance-enhancing features:
• Exceed all ANSI/TIA-568-C.2 component requirements
• Exceed ISO/IEC 11801 2nd Edition CAT 6A
component standard
• Metalized body helps suppress AXT
• Patented triple-stage compensation enhances margin
performance and augments AXT suppression
• Conductor retention feature that holds wires during
termination speeds installation
EXTREME CAT 6A SLIMLINE PATCH CORDS
(See pages A28-A29)
• Exceed all ANSI/TIA-568-C.2 component requirements
• FTP construction provides excellent AXT suppression
• Strain-relief boot ensures long-term network performance
• SlimLine plug profile reduces congestion
in higher-density applications
• Snagless and ergonomic boot design prevents tab
breakage during moves, adds, and changes
• Stranded 26-gauge construction provides
maximum flexibility
EXTREME CAT 6A PATCH PANELS
(See pages A11-A16)
• Exceed all ANSI/TIA-568-C.2 component requirements
• Inline IDC fields are consistent with 110-style
panel designs
• Designed to work with CAT 6A cables and help to
identify first-pair position, it is a true 110 design,
providing easier punchdown, improved reliability,
and consistent termination
• Patented isolation gap on circuit board minimizes
alien crosstalk (AXT) between ports
• Conductor retention feature keeps pairs in place
during termination
• Pair Separation Towers facilitate quick,
eective termination
• CAT 6A-compatible QuickPort patch panels are available
in standard metal or C1 Ultra composite construction
• QuickPort metal panels support density
up to 48 ports in 1RU
EXTREME CAT 6A 110-STYLE WIRING BLOCK KIT
(See page A22)
• Supports high-frequency data signals up to 500 MHz
• Can be used as a consolidation point (CP) in a TIA-defined
90-meter permanent link
For cabling solutions,
visit leviton.com/cable.
A4
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
copper systems
COPPER
EXTREME CAT 6+ QUICKPORT® CONNECTORS (see page A38)
• Patented Retention Force Technology protects tines from damage
from 4- or 6-pin plugs
• Pair Separation Tower design facilitates quick, eective termination
•
Patented dual-layer T568A and T568B wiring label simplifies punchdown
and reduces rework
• Increased wire retention reduces tine contact failure caused by cable
stress and fatigue
• 110-style rear termination field for easy termination when installed
in a wallplate or panel
• Available in bulk packs
EXTREME CAT 6+ PATCH PANELS (see pages A13-A17)
• Patented Retention Force Technology protects tines from damage
from 4- or 6-pin plugs
• Dual universal T568A and T568B wiring
• ANSI/TIA-606-B compliant labeling for easy port identification
• Numerous 110-style, QuickPort, and C1 Ultra composite flat
and angled options to meet any application need
EXTREME CAT 6+ 110-STYLE WIRING BLOCKS (see page A22)
• 96- and 288-pair wall-mount options
• 96-, 192-, and 288-pair rack-mount options
• Can be used as a consolidation point (CP)
EXTREME CAT 6+ SLIMLINE PATCH CORDS (see pages A29-A30)
• Component-rated for optimal channel performance
•
Stranded 24-gauge wire ensures sucient flex life and long-term integrity
• Standard booted and SlimLine plug options
• SlimLine profile reduces congestion in higher-density applications
• Snagless and ergonomic boot design prevents tab breakage during
moves, adds, and changes
• Strain-relief boot ensures long-term
network performance
COPPER SYSTEMS | CAT 6
EXTREME® CAT 6+ UTP SYSTEM
Choose eXtreme 6+ for craft-friendly installation and outstanding CAT 6 performance. Exceptional
headroom above CAT 6 requirements provides no-risk performance for a variety of critical applications.
•
Independently verified to exceed ANSI/TIA-568-C.2 CAT 6 requirements for channel and component-level
performance, ISO/IEC 11801 2nd Ed. Class E requirements, and IEEE 1000BASE-T (802.ab)
• Optimized for maximum throughput and reliable transmission
• Guaranteed channel margin with approved cable
For cabling solutions,
visit leviton.com/cable.
New
A5 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
copper systems
COPPER
COPPER SYSTEMS | CAT 5e
GIGAMAX CAT 5E+ & CAT 5E UTP QUICKPORT® CONNECTORS
(see page A38)
Leviton oers two CAT 5e connectors, the GigaMax CAT 5e+ and GigaMax
CAT 5e. Both provide 1000BASE-T performance for high-bandwidth
applications. Connectors are available individually or in bulk packs. GigaMax
CAT 5e+ connectors include exclusive performance-enhancing features:
• Component rated for optimal channel performance
• Patented Retention Force Technology protects tines from damage
from 4- or 6-pin plugs
• Pair Separation Towers facilitate quick, eective termination
• Patented dual-layer T568A and T568B wiring label simplifies
punchdown and reduces rework
GIGAMAX CAT 5E+ PATCH PANELS (see pages A13-A17)
• Patented Retention Force Technology protects tines from damage
from 4- or 6-pin plugs
• Universal T568A and T568B wiring
• ANSI/TIA-606-B compliant labeling for easy port identification
• Numerous 110-style, QuickPort, and C1 Ultra composite flat
and angled options to meet any application need
CAT 5E 110-STYLE WIRING BLOCKS (see page A23-24)
• 100-, 200-, and 300-pair rack-mount options
• Can be used as a consolidation point (CP)
CAT 5E SLIMLINE PATCH CORDS (see pages A29-A30)
• Component rated for optimal channel performance
•
Stranded 24-gauge wire ensures sucient flex life and long-term integrity
• Standard booted and congestion-reducing SlimLine plug options
• Snagless and ergonomic boot design prevents tab breakage during
moves, adds, and changes
• Strain-relief boot ensures long-term
network performance
GIGAMAX® CAT 5E+ & CAT 5E UTP SYSTEM
• Guaranteed to exceed ANSI/TIA-568-C.2 and ISO/IEC 11801
2nd Ed. Class D CAT 5e requirements for component and channel level
performance, and IEEE 1000BASE-T (802.ab)
For cabling solutions,
visit leviton.com/cable.
New
A6
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
copper systems
COPPER
COPPER SYSTEMS | Shielded
CAT 6A/6/5E SHIELDED SYSTEMS
• Each system independently tested and verified to exceed ANSI/TIA-568-C.2
and ISO/IEC 11801 component, permanent link, and channel requirements
• Oer a high level of security for networks in government, health care, financial, casinos,
transportation, education, and other sensitive environments
• Superior protection from electromagnetic interference (EMI) and radio frequency interference (RFI)
• Compatible with F/UTP, U/FTP, and other common shielded cable types
SPOTLIGHT High-Density Shielded Solutions
High-density shielded solutions oer an exceptional level of data
security and EMI/RFI protection for government, health care, gaming,
manufacturing, and other sensitive environments. With shielding,
internal data signals are securely contained and isolated from
interference, providing superior alien crosstalk (AXT) suppression.
Additionally, up to six connectors fit in a single-gang wallplate to
support high-density applications.
CAT 6A/6/5E SHIELDED CONNECTORS (see page A40)
• Robust die-cast housing
• Unique design requires no punchdown tool
• 270° hinge for easy access and termination
• Meet ANSI/TIA-568-C.2 component requirements and exceed
ISO/IEC 11801 2nd Edition
CAT 6A/6/5E SHIELDED PATCH PANELS (see pages A15-A16)
• Meet ANSI/TIA-568-C.2 and ISO/IEC 11801
• Stainless-steel “comb” maintains consistent ground path
between connector and panel
• 24-port 1RU and 48-port 2RU flat and angled profiles
• Accept all shielded QuickPort® connectors
CAT 6A/6/5E SHIELDED PATCH CORDS (see pages A28-A29)
• Cable construction provides data security and EMI/RFI protection
• Stranded conductors provide longer flex life
• Snagless boot design prevents tab breakage during moves,
adds, and changes
• Strain-relief boot ensures long-term
network performance
For cabling solutions,
visit leviton.com/cable.
New
New
A7 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
copper systems
COPPER
COPPER SYSTEMS | e2XHD Patching System
e2XHD COPPER & FIBER PATCHING SYSTEM
An easy-to-connect, high-density solution for enterprise and data center applications,
where fast deployment and simple maintenance is critical. It includes 1RU and 4RU
high-density panels, copper and fiber snap-in cassettes, and accessories for additional
cable protection and management. The e2XHD cassettes quickly snap in and pull out of the panels, making
installation, moves, adds, and changes easier than ever. See pages B27-B30 for e2XHD Fiber Patching System.
e2XHD COPPER CASSETTE KIT (see page A18)
• Used exclusively with e2XHD high-density panels
• QuickPort® connectors snap into cassette after termination,
sold separately
• AXT barrier reduces alien crosstalk between ports
• Cassettes are also available pre-terminated on Leviton trunk cables
Make-to-Order (MTO) program
1RU AND 4RU HIGH-DENSITY PANELS (see page A18)
• Hold up to 48 copper ports per rack unit
• Accept up to 8 copper cassettes per RU
• Mount on standard 19" relay racks or cabinets
• Flat and angled e2XHD panels available
SIMPLE INSTALLATION AND REMOVAL
• Alignment tabs on rear of patch panel make cassette insertion easy
• To remove cassette from panel, simply pull out handle using
release latch; no tools required
• Rear cable manager supports both copper and fiber cables,
and includes cable management rings and tie downs
Copper Cassette and
eXtreme® CAT 6 or CAT 6A
QuickPort Connectors
• High-density panels allow patching for up to 48 copper
ports in a 1RU panel or 192 ports in a 4RU panel
• System accessories include rear cable managers, blank
cassette inserts, angled panel covers, and cable clamp kits
e2XHD PATCHING SYSTEM VIDEO
Watch the training video
at leviton.com/videos:
"e2XHD Patching System
for Data Center Networks."
For cabling
solutions, visit
leviton.com/cable.
A8
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
copper systems
COPPER
COPPER SYSTEMS | QuickPort® Data, Voice & A/V Solutions
QUICKPORT DATA, VOICE & AUDIO/VIDEO SOLUTIONS
The QuickPort System, our exclusive set of patch panels, connectors, wallplates, and surface-mount boxes, allows you
to create the perfect mix of voice, data, video, and audio. Connectors sold separately, available on pages A37-A43.
QUICKPORT PATCH PANELS
Choose from an amazing selection of QuickPort patch panels,
including shielded, high-density, recessed for close quarters,
ultra-strong composite, and two styles of angled panels.
VertiGO® Zero-U QuickPort panels support up to 12 ports per
panel and can mount in virtually any type of installation.
Patented VertiGO Zero-U QuickPort Panel
CAT 6A
Connector
Stereo Adapter
HDMI Connector
Feedthrough
F-Connector
Feedthrough
RCA Connector
USB A/A Connector
Feedthrough
Insert
Connectors & Adapters
QuickPort Wallplates
Patented Magnifying Lens
QuickPort Data ConnectorF-Connector FeedthroughRCA Connector
A9 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
copper systems
COPPER
COPPER SYSTEMS | Multimedia Outlet System (MOS)
Dual-Gang Wallplate (3 units high)
Single-Gang Wallplate also available
Component Video
VGA VideoVGA Screw Terminal
VGA Feedthrough
RCA Feedthrough
Composite A/V
MULTIMEDIA OUTLET CONFIGURATIONS
The highly flexible front-loading Multimedia Outlet System (MOS) and QuickPort® Solutions work together to provide
hundreds of possible configurations. Select MOS, MOS and QuickPort, or QuickPort only configurations. For more
information about configuring your MOS installation, visit leviton.com/MOS. Find the complete line of copper and
fiber MOS solutions on pages A45-A46 and B65-B66.
QUICKPORT ADAPTER MODULES
Single-Gang WallplateDecora Insert
Component Video
MOS MODULES WILL ALSO WORK WITH DECORA
®
WALLPLATES:
Just snap one-unit-high modules into Decora inserts.
To see the complete line of fiber adapters see page B64.
A10
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
copper systems
COPPER
COPPE
R
FEATURED
PRODUCTS
CAT 6A 110-Style
Patch Panels A13
C1 Ultra-Composite
Patch Panels A14
1RU 48-Port QuickPort®
High-Density Flat &
Angled Panels A15-A17
e2XHD Patching System
A18
patch panels
Choose Leviton for all your patch panel needs. Our new e2XHD high-density panels
make patching easier than ever, using snap-in copper and fiber cassettes. Other
popular styles include the 1RU 48-port UTP, component-rated CAT 6A 110-style,
and the C1 Ultra with customizable face and composite construction. Additional
UTP and shielded panels, the patented Zero-U VertiGO®, die-cast high-density
panels, recessed panels for close quarters, and two styles of angled panels round
out the industry’s largest selection of patch panels.
PATCH PANELS | Selection Guide
FLAT COMPOSITE PATCH PANELS | A14
Leviton C1 Ultra panels have the same profile as
standard metal panels, but feature polymer
composite construction. Customizable faces are
ideal for data centers, telecommunication rooms,
and other showroom-style environments.
Available Styles: 110-Style | QuickPort® | Blank
Flat 48-Port
Angled 48-Port
ANGLED PATCH PANELS | A16
Recommended for use in racks to optimize patch cord
management and rack space utilization.
Available Styles: 110-Style | QuickPort | Shielded
FLAT STANDARD PATCH PANELS | A13-A15
Traditional, flat profile works well in almost any
application. Most flat panels include rear cable
management bars.
Available Styles: 110-Style | QuickPort | Shielded
Flat 48-Port
Die-Cast High-Density 48-Port
VertiGO® Zero-U
ZERO-U PATCH PANELS | A19
VertiGO panels are recommended for use in data center
cabinets, or for any application that needs connectivity
outside of the traditional 19" rack space. Vertical
channel models provide cable routing and protection.
Available Styles: QuickPort | Opt-X®
Recessed-Angled 48-Port Recessed-Flat 48-Port
RECESSED PATCH PANELS | A17
Designed primarily for data center cabinet
applications, recessed-flat and angled panels are
ideal where a low-profile appearance and minimal
depth in front of the panel is required.
Available Styles: 110-Style | QuickPort
e2XHD PATCH PANELS | A18
These high-density panels are designed for data
center applications where fast deployment and simple
maintenance is important. They accept both fiber and
copper e2XHD cassettes.
Available Styles: Flat | Angled
The Industry’s Best Service & Support
DARBY BRENNAN
Senior Technical Support Representative
Darby has nine years of experience providing outstanding technical support,
developing tools and initiatives to assist customers, representatives, and
distributors in using Leviton products. She has been integral in the creation and
launch of the Leviton ez-Cross tool and the Connected Home worksheet. Both
projects, developed in response to direct customer feedback, have successfully
optimized the custom ordering process.
Flat 48-Port
A12
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
patch panels
COPPER
PATCH PANELS | Flat Metal 110-Style > UTP
FLAT UTP COMPONENT-RATED 110-STYLE PATCH PANELS
• 1RU 12- or 24-port, 2RU 48-port, and 4RU 96-port configurations
• Available in CAT 6A, 6, and 5e
• 6-port RJ-45 modules on front, and 110-style punchdowns on rear
• Include color codes for T568A and B wiring schemes
• CAT 5e and 6 include 25-pair wiring schemes
• Rear cable management bar included with panels (one bar per 24 ports)
• CAT 6A panels include patented magnifying lens label holders for easy reading
• Silk-screened port numbers and paper label holders included
• Independently tested and verified by Intertek (ETL) to meet all TIA component, permanent link,
and channel requirements
• Patented Retention Force Technology (RFT) protects against damage from 4- or 6-pin plugs
FLAT 110-STYLE PATCH PANELS & PATCH BLOCK
DESCRIPTION CAT 6A CAT 6 CAT 5E
1RU 12-Port Flat 110-Style Patch Panel — 69586-U12 5G596-U12
1RU 24-Port Flat 110-Style Patch Panel [A] 6A586-U24 [B] 69586-U24 5G596-U24
2RU 48-Port Flat 110-Style Patch Panel 6A586-U48 [C] 69586-U48 5G596-U48
2RU 48-Port Flat 110-Style Patch Panel, central labeling [D] 69586-C48 5G596-C48
4RU 96-Port Flat 110-Style Patch Panel — 69586-U96 5G596-U96
12-Port 110-Style Patch Block, 89D bracket — [E] 69586-U89 5G596-U89
Leviton CAT 6A 110-style patch panels offer ANSI/TIA-568-C.2 performance
up to 500 MHz to support 10GBASE-T networks. The panels have a physical
design consistent with industry-standard 110-style panels, including in-line
configured IDCs and 6-port housing modules. In addition, they add several
exclusive design features:
• Patented Retention Force Technology (RFT) protects against damage
from 4- or 6-pin plugs
• Pair Separation Tower design makes untwisting CAT 6A pairs easier
• Separated IDC fields simplify identifying first cable-pair position
• Conductor retention feature holds conductors securely in place
during termination
• Triple-stage compensation with patented design features enhances
permanent link and channel performance
49005-CMB included with all
CAT 6A/6/5e flat panels.
C
A
D
B
E
AVAILABLE CABLE
MANAGEMENT:
See Section C for product details
and ordering information.
Versi-Duct®
Rear Cable
Management Bars
Horizontal Cable
Managers
Blank Filler Panels
VELCRO®
Brand Fasteners
SPOTLIGHT CAT 6A Component-Rated 110-Style Patch Panels
A13 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
patch panels
COPPER
PATCH PANELS | Flat C1 Ultra Composite > UTP
C1 ULTRA FLAT COMPOSITE UTP 110-STYLE AND QUICKPORT® PATCH PANELS
• Industry's first polymer construction
• Made from high-tech composite materials for a look unique in the patch panel market
• 10% stronger than standard 16-gauge metal patch panels, providing added support
during termination of 110-style panels
• Stylish look and customizable face make panels ideal for showroom-style environments
• Panel face can be customized to feature any design, color, or logo
• Available in 48-port 2RU QuickPort and 110-style models
• Include two integrated patch cord managers that attach directly to the face
of the panel, saving up to 50% of valuable rack space
• Patch cord managers prevent cables from obstructing view of port numbers
• Include two rear cable management bars
• Clear label holders create a window to easily view port numbers and custom designs
• Panel is 100% recyclable
FLAT COMPOSITE 110-STYLE & QUICKPORT PATCH PANELS
DESCRIPTION CAT 6 CAT 5E EMPTY
2RU 48-Port Flat Composite 110-Style Panel [A] C1686-U48 C1586-U48 —
2RU 48-Port Flat Composite QuickPort Panel — — [B] C1255-H48
2RU Blank Panel / Cable Manager — — [C] C1253-2CM
B
Customize C1 Ultra patch panels with any design, color, or logo.
Visit leviton.com/c1ultra to learn more.
C
Front & Rear Managers are
included with all C1 Ultra panels.
A
Watch the training video at
leviton.com/videos: “C1 Ultra
Composite Patch Panel.”
AVAILABLE CABLE
MANAGEMENT:
See Section C for product details
and ordering information.
Versi-Duct®
Rear Cable
Management Bars
Horizontal Cable
Managers
Blank Filler Panels
VELCRO®
Brand Fasteners
SPOTLIGHT C1 Ultra Patch Panels
C1 Ultra patch panels combine strength and durability with unique
style and customizable faces, providing a uniform look when installed
with Opt-X Ultra® Fiber Enclosures and Versi-Duct Cable Managers.
• Under applied force tests, the panel was 10% stronger than
standard 16 AWG metal patch panels
• Panels come kitted with two patch cord managers that attach
directly to the panel face, saving up to 50% of rack or cabinet
space and reducing obstruction of center label
• Clear label holders create a "window" to easily view centralized
port numbers and custom designs
Protective
Overlay Cover
Custom Insert
Patch Panel
A14
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
patch panels
COPPER
PATCH PANELS | Flat Metal QuickPort® > UTP & Shielded
The QuickPort system, our exclusive set of mix-and-match panels, connectors, wallplates,
and surface-mount boxes, allows you to create the perfect mix of voice, data, video,
and audio, all in a single panel. Connectors sold separately, available on pages A37-A43.
FLAT TRADITIONAL PATCH PANELS
• Standard-density 24- and 48-port panels are available with white blocks
or patented magnifying lens label holder
• Silk-screened port numbers on panel front
FLAT HIGH-DENSITY PATCH PANELS
• Panels maximize rack space and reduce costs in high-density applications
• 1RU 48-port panel available in standard (stamped) or patented, robust die-cast aluminum
• Standard 2RU 72-port panel also available
FLAT SHIELDED PATCH PANELS
• Shielding protects against electromagnetic interference (EMI) and radio frequency
interference (RFI), and provides excellent alien crosstalk (AXT) suppression
• Provide data security for government, financial, and other sensitive networks
• Include star washers and grounding lug
• Accept all shielded QuickPort connectors
FLAT QUICKPORT PATCH PANELS, PATCH BLOCKS & ACCESSORIES
DESCRIPTION CAT 6A CAT 6 CAT 5E EMPTY
1RU 24-Port Flat QuickPort Patch Panel [A] 6910G-U24‡69270-U24‡5G270-U24‡49255-H24‡
1RU 48-Port Flat QuickPort Patch Panel, cable management bar sold separately
— — — [B] 49255-Q48
1RU 48-Port Flat Die-Cast QuickPort Patch Panel — 69270-D48*
5G270-D48*
49255-D48*
2RU 48-Port Flat QuickPort Patch Panel 6910G-U48 69270-U48 5G270-U48 49255-H48
2RU 72-Port Flat QuickPort Patch Panel — — — [C] 49255-D72
1RU 24-Port Flat QuickPort Patch Panel, magnifying lens holder — — — [D] 49255-L24‡
2RU 48-Port Flat QuickPort Patch Panel, magnifying lens holder — — — [E] 49255-L48
1RU 24-Port Flat Shielded QuickPort Patch Panel — — — 4S255-S24‡
2RU 48-Port Flat Shielded QuickPort Patch Panel — — — [F] 4S255-S48
12-Port QuickPort Patch Block, mounting bracket sold separately, 10" H x 2.375" W — — [G] 49255-Q89
12-Port QuickPort Patch Block, extra deep, mounting bracket included, 10" H x 2.375" W — — 47689-0QP
QuickPort Patch Block 89D Mounting Bracket — — — [H] 40089-00D
* = 49005-CMB, rear cable manager not included.
‡ = Intact™ Intelligent Port Management ready (see Section E).
CAT 6A/6/5e patch panels are kitted with black 6A10G, 61110, or 5G110 connectors.
C
A
E G
D
F
B
49005-CMB included with all
CAT 6A/6/5e flat panels,
unless otherwise noted.
H
AVAILABLE CABLE
MANAGEMENT:
See Section C for product details
and ordering information.
Versi-Duct®
Rear Cable
Management Bars
Horizontal Cable
Managers
Blank Filler Panels
VELCRO®
Brand Fasteners
A15 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
patch panels
COPPER
Angled patch panels are ideal for 19" rack applications, offering easy termination
and improved patch cord routing. For cabinet applications, recessed-angled panels
(page A17) are recommended to meet minimal front depth requirements.
ANGLED UTP 110-STYLE & QUICKPORT PATCH PANELS
• Conserve rack space by routing patch cords directly into vertical cable management
• Angled design facilitates proper bend radius and simplifies termination
• 110-style angled panels are available in CAT 6A, 6, and 5e
• 110-style angled panels include a snap-in plastic label holder and card stock labels
• QuickPort angled panels include white write-on blocks
• 1RU 48-port QuickPort panel can be used with all QuickPort connectors including
CAT 6A, 6, 5e, fiber, and A/V
• CAT 6A panels include patented magnifying lens label holders for easy reading
• All QuickPort angled panels sold empty
ANGLED SHIELDED PATCH PANELS
• Provide excellent alien crosstalk (AXT) suppression
• Shielding protects against electromagnetic interference (EMI) and radio frequency
interference (RFI), and provides excellent alien crosstalk (AXT) suppression
• Provide data security for government, financial, medical, gaming, and other sensitive networks
• Include star washer and grounding lug
• Available in QuickPort 1RU 24-port and 2RU 48-port angled configurations
• Accept all shielded CAT 6A, 6, and 5e QuickPort connectors
ANGLED 110-STYLE & QUICKPORT PATCH PANELS
DESCRIPTION CAT 6A CAT 6 CAT 5E EMPTY
1RU 24-Port Angled 110-Style Patch Panel 6A587-U24 — — —
2RU 48-Port Angled 110-Style Patch Panel 6A587-U48 [A] 69587-U48 5G597-U48 —
1RU 24-Port Angled QuickPort Patch Panel — — — 49256-H24
2RU 48-Port Angled QuickPort Patch Panel — — — 49256-H48
2RU 72-Port Angled QuickPort Patch Panel — — — [B] 49256-D72
1RU 48-Port Angled High-Density QuickPort Patch Panel — — — [C] 49256-D48
1RU 24-Port Angled Shielded QuickPort Patch Panel — — — 4S256-S24
2RU 48-Port Angled Shielded QuickPort Patch Panel — — — [D] 4S256-S48
QuickPort Connectors are available on pages A37-A43.
PATCH PANELS | Angled 110-Style & QuickPort® > UTP & Shielded
A B
C D
49006-AMB Recommended angled
rear cable management bar
49254-BC1 Recommended
angled transitional cover
AVAILABLE CABLE
MANAGEMENT:
See Section C for product details
and ordering information.
Versi-Duct®
Rear Cable
Management Bars
Horizontal Cable
Managers
Blank Filler Panels
Transitional Covers
VELCRO®
Brand Fasteners
A16
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
patch panels
COPPER
PATCH PANELS | Recessed-Flat & Angled 110-Style & QuickPort® > UTP
A
D
Recessed-flat patch panels are a great option for rack and cabinet installations with minimal
front depth, and where rear cabinet doors are in close proximity to the back rail.
RECESSED-FLAT 110-STYLE & QUICKPORT PATCH PANELS
• 3" recessed design allows improved access and maintains proper cable bend radius
• All recessed-flat panels include a screwless cable management bar that fastens
directly to the back of the panel
• Recessed-flat 110-style panels include patented magnifying lens label holders for easy reading
• All QuickPort recessed-flat panels sold empty
RECESSED-ANGLED 110-STYLE & QUICKPORT PATCH PANELS
• Conserve rack space by routing patch cords directly into vertical cable management
• Recessed depth facilitates proper bend radius
• Unique dual-angled design greatly improves punchdown accessibility
• Recessed-angled 110-style panels include a snap-in plastic label holder and card stock labels
RECESSED-FLAT 110-STYLE & QUICKPORT PATCH PANELS
DESCRIPTION CAT 6 CAT 5E EMPTY
1RU 24-Port Recessed-Flat 110-Style Panel [A] 69586-R24 5G596-R24 —
2RU 48-Port Recessed-Flat 110-Style Panel [B] 69586-R48 5G596-R48 —
1RU 24-Port Recessed-Flat QuickPort Panel — — [C] 49255-R24
2RU 48-Port Recessed-Flat QuickPort Panel — — [D] 49255-R48
RECESSED-ANGLED 110-STYLE & QUICKPORT PATCH PANELS
2RU 48-Port Recessed-Angled 110-Style Panel [E] 6W587-U48 5W597-U48 —
1RU 24-Port Recessed-Angled QuickPort Panel — — 4W256-H24
2RU 48-Port Recessed-Angled QuickPort Panel — — 4W256-H48
2RU 72-Port Recessed-Angled QuickPort Panel — — [F] 4W256-D72
QuickPort connectors are available on pages A37-A43.
EF
Patented magnifying lens label
holders improve label visibility.
CB
4W006-AMB
Recommended rear cable
management bar for recessed-
angled panels
4W254-BC1
Recommended recessed-
angled transitional cover for
recessed-angled panels
AVAILABLE CABLE
MANAGEMENT:
See Section C for product details
and ordering information.
Versi-Duct®
Rear Cable
Management Bars
Horizontal Cable
Managers
VELCRO®
Brand Fasteners
49005-CMB included with all
recessed-flat panels.
A17 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
patch panels
COPPER
PATCH PANELS | e2XHD Patching System
• Panels allow mix-and-match of Leviton fiber
and copper snap-in cassettes
• Copper cassettes are available either on pre-terminated
trunks (see leviton.com/configurator) or kitted with
field-terminated eXtreme® CAT 6A or CAT 6 connectors
• Copper connectors easily snap into cassette
after termination
• System accessories include rear cable managers, blank
cassette inserts for unused cassette openings, and a
cover for the angled panel, minimizing dust or debris
• Rear Cable Manager includes four ¼" fiber storage rings
The e2XHD Patching System provides simple termination and improved cable routing for copper and fiber applications.
The system includes 1RU and 4RU panels, copper and fiber snap-in cassettes, and accessories for additional cable
protection and management. The e2XHD cassettes quickly snap in and pull out of the high-density angled panel, making
installation, moves, adds, and changes easier than ever. Copper cassettes are available either on pre-terminated trunks
or with field-terminated connectors. Panel covers and blank cassettes oer extra protection from dust and damage.
e2XHD PATCHING SYSTEM
DESCRIPTION PART NO.
[A] 1RU e2XHD Angled High-Density Panel E2X1A-D48
[B] 4RU e2XHD Angled High-Density Panel E2X4A-192
[C] 1RU e2XHD Flat High-Density Panel E2X1F-D48
4RU e2XHD Flat High-Density Panel E2X4F-192
[D] 6-port e2XHD Cassette, empty* E2XHD-BRK
[E] e2XHD Copper Cassette, terminated to trunk cable configure online at leviton.com/e2XHD
[F] e2XHD Rear Cable Manager for Angled Panel, with fiber storage rings (four ¼" rings) E2XHD-CMB
[G] e2XHD Rear Cable Manager for Flat Panel, with fiber storage rings (four ¼" rings) E2X1F-CMB
[H] e2XHD Angled Panel Cover E2XHD-COV
[I] e2XHD Cassette Blank E2XHD-BLK
[J] QuickPort® Connector Removal Tool E2XHD-JRT
[K] e2XHD Label Kit (4 pack)+E2XHD-LBL
e2XHD Patching System for fiber applications on pages B29-B30.
* = QuickPort connectors sold separately (see pages A37-A43).
+= Label kit occupies one row of panel.
B
DE
F
H
G
KC
A
I
J
New
A18
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
patch panels
COPPER
AB CDE F
PATCH PANELS | VertiGO® Zero-U QuickPort® & Opt-X®
VERTIGO ZERO-U QUICKPORT & OPT-X PATCH PANELS
• Patented innovative design for multiple applications (see right)
• Zero-U uses no rack space
• All styles sold empty, with either QuickPort or Opt-X style openings
• Low-profile design fully covers connections
• Improve cabinet center airflow by routing rear cable along outer edges
• Styles with 3" and 6" channels provide additional cable management space
• Hinged doors provide easy access to termination field
• Patented magnifying lens label holders facilitate easy reading
• Support copper and fiber installations
VERTIGO ZERO-U PATCH PANELS
DESCRIPTION EMPTY
[A] 12-Port QuickPort VertiGO Panel, panel only 49280-QP0
[B] 12-Port QuickPort VertiGO Panel, 3" channel 49280-QP3
[C] 12-Port QuickPort VertiGO Panel, 6" channel 49280-QP6
[D] Opt-X Adapter Plate VertiGO Panel, panel only 49280-AP0
[E] Opt-X Adapter Plate VertiGO Panel, 3" channel 49280-AP3
[F] Opt-X Adapter Plate VertiGO Panel, 6" channel 49280-AP6
Contact Inside Sales at 800.722.2082 for custom VertiGO configurations .
QuickPort connectors are available on pages A37-A43.
Opt-X adapter plates are available on pages B21-B22.
Channel not available separately.
See page B20 for additional
specialized fiber applications.
Patented VertiGO Zero-U Patch Panels offer unprecedented versatility for a wide range
of installations. In data centers where left- or right-side cabinet installation is ideal,
VertiGO can share mounting hardware with servers or other existing equipment. Where
traditional cabinet space is lacking, VertiGO can be mounted to a ladder tray, wire basket,
directly to the wall, under a raised floor, or even onto modular furniture.
VertiGO addresses three major data center issues: density, cooling, and appearance.
Mounting vertically along a back cabinet rail allows more terminations than would
otherwise be possible. Cables can be routed along the cabinet outer edges to improve
airflow. The low-profile design fully covers the connections, providing the clean look data
center managers seek.
RECOMMENDED
APPLICATIONS:
Any Size Cabinet
Ladder Tray
Wire Basket
Raised-Floor Enclosure
Modular Furniture
Wall-Mount
SPOTLIGHT VertiGO Zero-U Patch Panels > Unparalleled Flexibility
VERTIGO ZERO-U VIDEO
Watch the training video at
leviton.com/videos: "How to Mount
Leviton's VertiGO Patch Panel."
A19 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
patch panels
COPPER
PATCH PANELS | Telco Data & Voice Grade Panels / Labeling Solutions
DATA GRADE PATCH PANELS
• 8P8C Data Grade Panel supports 10/100BASE-T applications
• Feature 25-pair female Amphenol™ RJ-21X connectors
• Pre-configured in 24- and 48-port densities
VOICE GRADE PATCH PANELS
• 110-style or female 25-pair configurations
• Unique label delineates 1-, 2-, 4-, or 25-pair termination options
• Pre-configured in 24- and 48-port densities
• 25th pair (violet/slate) is not used in 25-pair style panels
PATCH PANEL LABELING SOLUTIONS
Quickly and easily identify ports on your patch panel or patch block for a perfectly organized installation.
Universal/110-style labeling kits are used with 12-, 24-, 48-, and 96-port panels. QuickPort® kits are available
for 24-, 32-, and 48-port panels. Label holders include adhesive backing for applying directly to patch panel
surface. See below for part numbers.
DATA GRADE PATCH PANELS
DESCRIPTION 1RU 24-PORT 2RU 48-PORT
8P8C Patch Panel, one 25-pair connector per 6 ports (supports 10/100BASE-T),
4 wire-pairs per port [A] 49018-J24 49018-J48
VOICE GRADE PATCH PANELS
8P4C Patch Panel, 110 termination, 2 wire-pairs per port [B] 49013-P24 [D] 49013-P48
8P4C Patch Panel, two 25-pair connectors per 24 ports, 2 wire-pairs per port 49014-J24 [C] 49014-J48
8P2C Patch Panel, one 25-pair connector per 24 ports, 1 wire-pair per port 49012-J24 49012-J48
PATCH PATCH PANEL LABELING SOLUTIONS
DESCRIPTION PART NO.
[E] Adhesive Holder and Labels Kit for QuickPort® Patch Panels (supports 24 ports) 49257-QHD
[F] Adhesive Holder and Labels Kit for 110-Style Patch Panels (supports 24 ports) 49257-I24
[G] Designation Kit Replacement for 110-Style Patch Panels (supports 24 ports) 69585-IDL
A-C D
FG
E
RJ-21X CONNECTORS PER PATCH PANEL
TELCO & VOICE GRADE PANELS
PART NO. 24-PORT 48-PORT
49012 1 2
49014 2 4
49018 4 8
A20
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
patch panels
COPPER
COPPE
R
FEATURED
PRODUCTS
CAT 6A Wiring Block A22
cross connect
Dependable, flexible, and cost-effective, Leviton 110-style and 66-block
cross-connect products are ideal for telecommunications rooms and distribution
frames. 110-style wiring blocks are available in CAT 6A, 6, and 5e, and can be
mounted to the wall or plywood backboard. Rack-mount solutions are also available.
CROSS CONNECT | 110-Style Wiring Products > CAT 6A/6
CAT 6A 110-STYLE WIRING BLOCKS
• Support high-frequency data signals up to 500 MHz
• Can be used as a consolidation point (CP) in a TIA-defined
90-meter permanent link
• Designed to mitigate alien crosstalk (AXT)
• Independently tested and verified by Intertek (ETL) to meet
all TIA component, permanent link, and channel requirements
• Available in 64-pair wall-mount block
CAT 6 110-STYLE WIRING PRODUCTS
• Support voice, data, and security applications
• Complete selection of rack and wall-mount blocks, mounting frames, patch cords, and cable management
• Wall-mount wiring block kits available in 96-, 192-, and 288-pairs
• Rack-mount wiring block kits available in 1RU 96-pair, 2RU 192-pair, and 3RU 288-pair configurations
• 110-style patch cords in 110-110 and 110-T568A/B configurations
• Connector clips withstand 200 re-terminations
CAT 6A 110-STYLE WALL-MOUNT WIRING BLOCK KITS
DESCRIPTION 64-PAIR
[A] eXtreme® CAT 6A 110-Style Wiring Block, wall mount w/ legs and C-4 clips* 41D6A-1F4
CAT 6 110-STYLE WIRING BLOCK KITS (W/ C-4 CLIPS)
DESCRIPTION 96-PAIR 192-PAIR 288-PAIR
eXtreme CAT 6+ 110-Style Wiring Block, wall mount w/o legs 41NB6-1F4 — —
eXtreme CAT 6+ 110-Style Wiring Block, wall mount w/legs* [B] 41AB6-1F4 — 41AB6-3F4
eXtreme CAT 6+ 110-Style Wiring Block, rack mount [C] 41DR6-1F4 [D] 41DR6-2F4 [E] 41DR6-3F4
CAT 6 110-STYLE PATCH CORDS
DESCRIPTION 1-FOOT 2-FOOT 3-FOOT 5-FOOT 7-FOOT 10-FOOT
[F] eXtreme CAT 6+ 110 to 110 Patch Cord 62240-01S 62240-02S 62240-03S 62240-05S 62240-07S 62240-10S
[G] eXtreme CAT 6+ 110 to T568B Patch Cord 6234B-01S — 6234B-03S 6234B-05S 6234B-07S 6234B-10S
CAT 6 110-STYLE CONNECTOR CLIPS
DESCRIPTION PART NO.
[H] CAT 6 C-4 Clips (bag of 10) 69104-IDC
110-STYLE LABELING SOLUTIONS
[I] CAT 6 Label Kit, 6/kit 41LBL-60W
[J] Label Holder, 6/kit 41100-HLD
*CAT 6A/6 110-Style wiring block stand-o legs are non-removable. Legs not sold separately for CAT 6A/6 wiring blocks.
AF, G H
C-E
BIJ
Visit leviton.com/support for
detailed termination diagrams.
CROSS-CONNECT TERMINATION VIDEO
Watch the training video
at leviton.com/videos:
"110-Style Cross-
Connect Termination."
A22
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
cross connect
COPPER
CROSS CONNECT | 110-Style Wiring Products > CAT 5e
CAT 5E 110-STYLE WIRING PRODUCTS
• Wall-mount bases available in 50- and 100-pair with or without legs
• 300-pair bases include stand-o legs, labels, and label holders
• Kits include bases, connecting blocks, labels, and holders
• Rack-mount units are for 100-, 200-, and 300-pair densities
• Patch cords in 110-110 and 110-T568A/B configurations
D-F
G
A-C
NO
The Industry’s Best Service & Support
DANIEL UNDERBRINK, RCDD
Senior Applications Engineer
As one of our applications engineering experts, Dan acts as the voice of the customer
on copper product development teams, ensuring the construction and design of Leviton
solutions meet customer needs. Customers also rely on Dan as a technical resource,
as he delivers remote and on-site support for customer installations around the world.
He’s a regular contributor to the Leviton online Knowledgebase, co-authored our
popular CAT 6A Reference Guide, and continuously supports contractor certification
and international training initiatives.
J, KH, I
L, M
A23 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
cross connect
COPPER
CAT 5E 110-STYLE WALL-MOUNT WIRING BLOCK KITS
DESCRIPTION C-4 CLIPS C-5 CLIPS
GigaMax® CAT 5e 110-Style Wall-Mount Wiring Block Kit, w/ legs, 100 pair* 41AB2-1F4 41AB2-1F5
GigaMax CAT 5e 110-Style Wall-Mount Wiring Block Kit, w/o legs, 100 pair — 41NB2-1F5
GigaMax CAT 5e 110-Style Wall-Mount Wiring Block Kit, w/ legs, 300 pair* 41AB2-3F4 41AB2-3F5
CAT 5E 110-STYLE WALL-MOUNT WIRING BLOCKS
DESCRIPTION 50-PAIR 100-PAIR 300-PAIR
GigaMax CAT 5e 110-Style Wall-Mount Wiring Block, w/ legs* 41AW1-050 [B] 41AW2-100 [A] 41AW2-300
GigaMax CAT 5e 110-Style Wall-Mount Wiring Block, w/o legs 41DW1-050 [C] 41DW2-100 —
89D Bracket Compatible Wiring Base UNIT** 41DW1-589 — —
CAT 5E 110-STYLE RACK-MOUNT KITS
DESCRIPTION C-4 CLIPS C-5 CLIPS
GigaMax CAT 5e 110-Style Rack-Mount Wiring Block Kit, 100 pair, 1RU 41DBR-1F4 41DBR-1F5
GigaMax CAT 5e 110-Style Rack-Mount Wiring Block Kit, 200 pair, 2RU 41DBR-2F4 41DBR-2F5
GigaMax CAT 5e 110-Style Rack-Mount Wiring Block Kit, 300 pair, 3RU 41DBR-3F4 41DBR-3F5
CAT 5E 110-STYLE RACK-MOUNT WIRING BLOCKS
DESCRIPTION 100-PAIR 200-PAIR 300-PAIR
GigaMax CAT 5e 110-Style Rack-Mount Wiring Block [D] 41DR2-100 [E] 41DR2-200 [F] 41DR2-300
RACK-MOUNT MANAGER
DESCRIPTION PART NO.
Rack-Mount Horizontal Cord Manager [G] 41D1R-HCM
CROSS CONNECT | 110-Style Wiring Products > CAT 5e
CAT 5E 110-STYLE PATCH CORDS
DESCRIPTION 1-FOOT 2-FOOT 3-FOOT 5-FOOT 7-FOOT 10-FOOT
GigaMax CAT 5e 110 to 110 Patch Cord, 4 pair [H] 5G240-01S 5G240-02S 5G240-03S 5G240-05S 5G240-07S 5G240-10S
GigaMax CAT 5e 110 to 568A Patch Cord, 4 pair [I] 5G34A-01S 5G34A-02S 5G34A-03S 5G34A-05S 5G34A-07S 5G34A-10S
GigaMax CAT 5e 110 to 568B Patch Cord, 4 pair 5G34B-01S 5G34B-02S 5G34B-03S 5G34B-05S 5G34B-07S 5G34B-10S
CAT 5E 110-STYLE CONNECTOR CLIPS
DESCRIPTION C-3 CLIPS C-4 CLIPS C-5 CLIPS
GigaMax CAT 5e 110-Style Connector Clips (bag of 10) 49103-IDC [J] 49104-IDC [K] 49105-IDC
GigaMax CAT 5e 110-Style Connector Clips (bag of 50) — 49104-I50 —
CAT 5E 110-STYLE WIRING BLOCK ACCESSORIES
DESCRIPTION PART NO.
GigaMax CAT 5e 110-Style legs (2 ea) (for use with 41DW1 only) 410L2-050
GigaMax CAT 5e 110-Style legs (2 ea) (for use with 41DW2 only) 410L2-100
110-Style Horizontal Cord Manager w/o legs [L] 41D10-HCM
110-Style Horizontal Cord Manager w/ legs* [M] 41A10-HCM
110-STYLE LABELING SOLUTIONS
CAT 5e Label Kit, 6/kit [N] 41LBL-00W
Label Holder, 6/kit [O] 41100-HLD
*CAT 5e 110-style wiring block stand-o legs are non-removable.
**89D Brackets, 40089-00D, sold separately, see page A15.
A24
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
cross connect
COPPER
CROSS CONNECT | 110-Style Wiring Cable Management
A, B C, D
WALL-MOUNT CORD MANAGERS & 110-STYLE PRODUCTS
• Vertical cord managers help route patch cords in high-density applications
• Basic wall-mount unit features 300-pair capacity
• Extension kits add up to 600 extra pairs
• Rear cable channel, side slots, horizontal cord managers, and bottom
cable tray included
• Horizontal rack-mount cord organizer available
VERTICAL CORD MANAGERS AND 110-STYLE WALL-MOUNT WIRING PRODUCTS
DESCRIPTION PART NO.
[A] 300-Pair Basic Mounting Frame Unit (sheet metal frame and bottom cable tray only) 41MB2-SMF
[B] 300-Pair Extension Mounting Frame Unit (sheet metal frame only) 41MB2-SME
Basic Mounting Frame Kit, three 100-pair bases, mounting frame, cable tray, 75 C-4 connector blocks,
three horizontal cord managers, label strip holders, and white label strips 41MB2-3F4
Basic Mounting Frame Kit, three 100-pair bases, mounting frame, cable tray, 60 C-5 connector blocks,
three horizontal cord managers, label strip holders, and white label strips 41MB2-3F5
Extension Mounting Frame Kit, three 100-pair bases, mounting frame, 60 C-4 and 12 C-5 connector blocks,
three horizontal cord managers, label strip holders, and white label strips 41MB2-EXT
[C] 300-pair Vertical Cord Manager Basic Unit, includes bottom cable tray 41880-300
[D] 300-pair Vertical Cord Manager Extension Unit 41880-EXT
Basic Mounting Frame Kits include three
100-pair bases, mounting frame, cable
tray, connector blocks, three horizontal
cord managers, label strip holders, and
white label strips.
A25 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
cross connect
COPPER
66 CONNECTING BLOCKS
• Install individually or in pairs in cross-connect system
• High-impact fire-retardant UL 94V-0 plastic
• Phosphor bronze quick-connect insulation
displacement 66-clips
• 25- and split 50-pair styles
• Accessories include covers, brackets, wire distribution
spools, adapters, and bridging clips
SURFACE-MOUNT MINI PATCH PANELS
• Excellent for tight spaces and simple breakout patching
• Combine two or more panels for in-line cross connect
• Use with 25-pair cable assemblies
• Wall mountable
66 CONNECTING BLOCKS
DESCRIPTION PART NO.
[A] M-Block: 25-pair [66M1-25]* 10" H x 3 5
/
16" W x 1 3
/
16" D 40066-M25
Split M-Block: 50-pair [66M1-50]* 10" H x 3 5
/
16" W x 1 3
/
16" D 40066-M50
[B] M-Block, female connector [66M1-50W]* 10" H x 3 5
/
16" W x 1 3
/
16" D 40066-0MW
[C] M-Block, female and male connectors [66M1-50W2]* 10" H x 3 5
/
16" W x 1 3
/
16" D 40066-MW2
[D] Connectorized Demarc Block [66M1-50R]* 10" H x 3 13
⁄
32" W x 2 ¾" D, female Amphenol™ 40066-0MR
BRIDGING CLIPS
[E] Bridging Clips (SA-1) (50 per package) 40067-0BC
HINGED COVERS AND SNAP-ON COVERS
Snap-on Cover for M-Blocks: [66MC-4]* 9 15
/
16" H x 2 15
/
16" W x 5
/
16" D 40050-MCV
[F] Hinged Cover for M-Blocks: grey [66MC4LH-G]* 10" H x 2 7
/
16" W x ¾" D 40050-MHG
[G] Hinged Cover for Demarc Blocks: orange [66MC4LH-O]* 10" H x 2 7
/
16" W x ¾" D 40050-MH0
BRACKET FOR M BLOCKS AND CONNECTOR MOUNTING
[H] M-Block Bracket for Connector Mounting: [89-D/QuickPort® Blocks]* 10" H x 3 13
⁄
32" W x 1 ½" D 40089-00D
[I] MODULAR ADAPTERS
2-Position Modular Adapter [Tap-2]* - Converts two 66-clip contacts into 6P2C modular connector 40072-0T2
4-Position Modular Adapter [Tap-4]* - Converts four contacts into 6P4C modular connector 40072-0T4
6-Position Modular Adapter [Tap-6]* - Converts six contacts into 6P6C modular connector 40072-0T6
8-Position Modular Adapter, T568B wiring [Tap™-8]* - Converts eight contacts into 8P8C non-keyed modular connector 40072-0T8
WIRE DISTRIBUTION SPOOLS
[J] Wire Distribution Spool [20-A]* 1 ¾" Dia. x 3" H 40054-0DS
[K] Wire Distribution Spool with screw [20-B]* 1 ¾" Dia. x 3" H 40054-DSS
SURFACE-MOUNT MINI PATCH PANELS
[L] 25 6-position 2-Conductor [RJ-11]* FCC Spec Jacks, connected to a circuit board with one male 25-pair connector 41600-00I
[M] 25 6-position 2-Conductor [RJ-11]* FCC Spec Jacks, connected to a circuit board with two bridged 25-pair connectors 41620-00I
Mounting Magnets (20 per package) 49200-00M
*Numbers in brackets refer to industry product designation.
CROSS CONNECT | 66 Blocks & Accessories
ABC ED
F, G H I J, K L, M
Visit leviton.com/support for
detailed termination diagrams.
A26
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
cross connect
COPPER
COPPE
R
FEATURED
PRODUCTS
e2XHD Trunks A32
Secure RJ System A33
patch cords & cable assemblies
Connect data center, telecom room, and work area equipment with Leviton
cable assemblies. The Secure RJ System oers lockable cords and trunks for
sensitive applications. Copper trunks can be custom ordered in a wide variety of
options – including pre-terminated to e2XHD copper cassettes – greatly reducing
installation time. Patch cords are available in CAT 6A, 6, and 5e, UTP or shielded,
and a variety of lengths and colors.
& CABLE ASSEMBLIES | CAT 6A Patch Cords > UTP & Shielded
All Leviton patch cords are components of a category-rated network infrastructure solution
that includes connectors, patch panels, and approved Leviton partner cabling. For optimum
performance and full system warranty, use a Leviton Contractor Program installer to install
your Leviton components.
CAT 6A PATCH CORDS
• Same cord for UTP or shielded installations
• SlimLine cords feature narrow-profile plug for less congestion in high-density applications
• SlimLine cords are independently tested and verified by Intertek (ETL) to meet ANSI/TIA-568-C.2 component requirements
• Standard and LSZH cords are independently tested and verified by Intertek (ETL) to meet ANSI/TIA-568-C.2
channel requirements
• CAT 6A cords provide exceptional alien crosstalk (AXT) suppression in 6A channels
• Strain-relief boot ensures long-term network performance
• Snagless design prevents tab breakage
• Outside diameter of .240" is easier to manage
• 26-gauge stranded cable for maximum flexibility
• Low-Smoke Zero-Halogen (LSZH) cords available
• Leviton patch cord required for channel warranty
CAT 6A PATCH CORDS
DESCRIPTION CAT 6A
[A]
eXtreme
®
CAT 6A Component-Rated SlimLine Patch Cord (same cord for UTP or shielded installations)^
6AS10-xx*
[B] eXtreme CAT 6A Snagless Channel
-Rated
Standard Patch Cord^ 6210G-xx~
[C] eXtreme CAT 6A Snagless Channel
-Rated
Low-Smoke Zero-Halogen (LSZH) Patch Cord^ 6AZ10-††º
xx = Length in feet º = Length in meters
* = Color: White (W), Yellow (Y), Red (R), Blue (L), Green (G), Grey (S), Black (E) ~ = Color: White (W), Red (R), Blue (L), Grey (S)
†† = Color: White (WH), Blue (BL), Grey (GY) All Leviton CAT 6A/6 and 5e patch cords are RoHS Compliant.
^ = Minimum orders and extended lead time may apply. Contact Inside Sales at 800.722.2082 for more details.
Make to order! CAT 6A PATCH CORD OPTIONS
CORD
SERIES CORD TYPE BOOT TYPE CABLE RATING COLORS STANDARD LENGTH
(FEET)
MAKE-TO-ORDER
LENGTH (FEET)
6AS10 CAT 6A FTP SlimLine CM (PVC) White, Yellow, Red, Blue, Green, Grey, Black 3, 5, 7, 10, 15, 20 3-72
6210G CAT 6A FTP Snagless CM (PVC) White, Red, Blue, Grey 3, 5, 7, 10 N/A
6AZ10 CAT 6A FTP Snagless LSZH White, Blue, Grey 1, 2, 3, 5 meters N/A
All patch cords utilize stranded cable.
For assistance customizing your patch cords, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
Note: Minimum order quantities may apply for Make-to-Order cords. Additional colors and lengths may be available as a special order.
Minimum orders and extended lead time may apply for special orders. Contact Inside Sales at 800.722.2082 for more information.
PATCH CORDS
Colors:
White (W) Yellow (Y) Red (R) Grey (S)
Blue (L) Green (G) Black (E) White (WH) Grey (GY)Blue (BL)
†† LSZH Colors:
AC
B
New New New
A28
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
patch cords
& cable assemblies
COPPER
CAT 6/5E UTP PATCH CORDS
DESCRIPTION CAT 6 CAT 5E
[A]
Component-Rated
SlimLine Patch Cord 6D460-xx* 5D460-xx◊
[B]
Channel-Rated
Standard Patch Cord,
matching boot 62460-xx* 5G460-xx*
Snagless
Low-Smoke Zero-Halogen
(LSZH)
Channel-Rated
Patch Cord 6Z460-††º —
CAT 6/5E SHIELDED PATCH CORDS
[C] Snagless
Channel-Rated
Shielded
Patch Cord, matching boot, grey only 6S460-xxS 5S460-xxS
HIGH-FLEX HD6 CORDS
DESCRIPTION 1G
[D] High-Flex HD6 Patch Cord 6H460-xx•
* = Color: White (W), Yellow (Y), Red (R), Blue (L), Green (G), Grey (S), Black (E)
xx = Length in feet
◊ = Color: White (W), Red (R), Blue (L), Green (G), Grey (S)
†† = Color: White (WH), Blue (BL), Grey (GY)
º = Length in meters
• = Color: White (W), Yellow (Y), Blue (L), Grey (S)
All Leviton CAT 6A/6 and 5e patch cords are RoHS Compliant.
& CABLE ASSEMBLIES | CAT 6 & 5e Patch Cords > UTP & Shielded
Colors:
White (W) Yellow (Y) Red (R) Grey (S)
Blue (L) Green (G) Black (E) White (WH) Grey (GY)Blue (BL)
†† LSZH Colors:
PATCH CORDS
CAT 6/5E UTP & SHIELDED PATCH CORDS
• SlimLine cords are independently tested and
verified by Intertek (ETL) to meet ANSI/TIA-568-C.2
component requirements
• Standard and LSZH cords are independently tested and
verified by Intertek (ETL) to meet ANSI/TIA-568-C.2
channel requirements
• SlimLine styles feature narrow-profile plug to
reduce congestion in high-density applications
• SlimLine style strain-relief boot ensures long-term
network performance
• SlimLine style snagless boot design prevents
tab breakage
• 24-gauge stranded cable for maximum flexibility
• Standard shielded style for EMI/RFI protection
HIGH-FLEX HD6 PATCH CORD
1G APPLICATION GRADE
• Ultra high-density design
• 28 AWG stranded for the ultimate flexibility
• Used in 1 Gigabit applications where CAT 6 patch
cords are commonly utilized
Make to order! CAT 6 & 5E PATCH CORD OPTIONS
CORD
SERIES CORD TYPE BOOT
TYPE
CABLE
RATING COLORS STANDARD LENGTH
(FEET)
MAKE-TO-ORDER
LENGTH (FEET)
6D460 CAT 6 UTP SlimLine CM (PVC) White, Yellow, Red, Blue, Green, Grey, Black 3, 5, 7, 10, 15, 20 1-200
62460 CAT 6 UTP Snagless CM (PVC) White, Yellow, Red, Blue, Green, Grey, Black 3, 5, 7, 10, 15, 20 1-200
6Z460 CAT 6 UTP Snagless LSZH White, Blue, Grey 1, 2, 3, 5 meters N/A
6S460 CAT 6 FTP Snagless CM (PVC) Grey 3, 5, 7, 10, 15, 20 1-200
6H460 1G UTP Snagless CM (PVC) White, Yellow, Blue, Grey 0.5, 1, 2, 3, 4, 5, 7, 10, 15, 20 N/A
5D460 CAT 5e UTP SlimLine CM (PVC) White, Yellow, Blue, Green, Grey 3, 5, 7, 10 1-200
5G460 CAT 5e UTP Snagless CM (PVC) White, Yellow, Blue, Green, Grey 3, 5, 7, 10 1-200
5S460 CAT 5e FTP Snagless CM (PVC) Grey 3, 5, 7, 10, 15, 20 1-200
All patch cords utilize stranded cable.
For assistance customizing your patch cords, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
Note: Minimum order quantities may apply for Make-to-Order cords. Additional colors and lengths may be available as a special order.
Minimum orders and extended lead time may apply for special orders. Contact Inside Sales at 800.722.2082 for more information.
AD
BC
New New
A29 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
patch cords
& cable assemblies
COPPER
PATCH CORDS & CABLE ASSEMBLIES |
Make-to-Order (MTO) & Special Order
BUILD YOUR OWN PRODUCTS
WITH THE LEVITON MAKE-TO-ORDER PROGRAM
We’ve made building the exact solution for your network quicker and easier than ever.
Rely on our innovative online custom configurators for a wide variety of copper products.
CUSTOMIZE AND ORDER THROUGH LEVITON ONLINE CONFIGURATORS
• Pre-Terminated Copper Trunks - CAT 6A/6/5e
• Pre-Terminated Copper Trunks - e2XHD cassettes
• Secure RJ Patch Cords - CAT 6A/6
SPECIAL ORDER
• Additional colors and lengths may be available as a special order
• Minimum orders and extended lead time apply for special orders
• Contact Tech Support at 800.824.3005 for more information
TOTAL LENGTH
TERMINATION
TERMINATION
BREAKOUT LENGTH
CATEGORY RATING
JACK COLOR
ALIGNMENT
# OF CABLES
ALIGNMENT = STAGGERED
COPPER TRUNK CABLE DIAGRAM (CUSTOMIZE AT LEVITON.COM/CONFIGURATOR)
Copper Trunks Pre-Terminated with Cassette
Secure RJ Patch Cords UTP Jack-to-Jack Trunk
A30
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
patch cords
& cable assemblies
COPPER
PRE-TERMINATED COPPER TRUNKS
• Custom configured for length, connector type, and more
• Fast and easy installation with reduced labor costs
• 100% factory tested, with test results available
• CAT 6A trunks all use component-rated connectors, which provide guaranteed
performance in short lengths
• UTP connectors utilize patented Retention Force Technology (RFT)
for consistent system reliability
• Plugs feature clear SlimLine design with snagless strain-relief boot
• Terminated ends oered in four staggered alignments or even cut
• Customized breakout length from braided sleeve improves installation
flexibility and appearance
• Each assembly receives an individualized identification number, and individual cables are
numbered relative to that identification number (custom labeling available on request)
• Optional pulling eye protects connectors and eases installation
• Pre-terminated assemblies are eligible for limited lifetime product, system,
and performance warranties
• Noise-Canceling Helix Technology (NCHT) available to improve RF interference
UTP jack to plug
PATCH CORDS & CABLE ASSEMBLIES | Pre-Terminated Trunks
UTP jack to jack
Make to order! PRE-TERMINATED COPPER TRUNK OPTIONS
CABLE TYPE CABLE RATING # OF
CABLES
CABLE
LENGTH
CABLE
COLOR* INDIVIDUAL JACK COLOR TERMINATION
OPTIONS
CAT 6A UTP CMP, CMR,
LSZH 6, 8 10-295 feet
3-90 meters Blue White, Light Almond, Ivory, Yellow, Orange, Crimson,
Red, Purple, Blue, Green, Grey, Black, Brown
Jack, Plug,
Open
CAT 6A
NCHT UTP LSZH 6, 8 10-295 feet
3-90 meters Blue White, Light Almond, Ivory, Yellow, Orange, Crimson,
Red, Purple, Blue, Green, Grey, Black, Brown
Jack, Plug,
Open
CAT 6A FTP CMP, CMR,
LSZH 6, 8 10-295 feet
3-90 meters Grey Zinc Jack, Open
CAT 6 UTP CMP, CMR,
LSZH 6, 8, 12 6-295 feet
2-90 meters Blue White, Light Almond, Ivory, Yellow, Orange, Crimson,
Red, Purple, Blue, Green, Grey, Black, Brown
Jack, Plug,
Open
CAT 6 FTP CMP, CMR,
LSZH 6, 8, 12 10-295 feet
3-90 meters Grey Zinc Jack, Open
CAT 5e UTP CMP, CMR 6, 8, 12 6-295 feet
2-90 meters Blue White, Light Almond, Ivory, Yellow, Orange, Crimson,
Red, Purple, Blue, Green, Grey, Black, Brown
Jack, Plug,
Open
CAT 5e FTP CMP, CMR 6, 8, 12 10-295 feet
3-90 meters Grey Zinc Jack, Open
*Additional cable colors may be available, but would require extended lead time. Contact Inside Sales at 800.722.2082 for more details.
All trunks utilize solid conductor cable.
For assistance customizing your copper trunks, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
RECOMMENDED
APPLICATIONS:
Data Center Cabinets
Telecommunications
Racks
Quick Network
Deployment
A31 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
patch cords
& cable assemblies
COPPER
PATCH CORDS & CABLE ASSEMBLIES | e2XHD Pre-Terminated Trunks
e2XHD copper cassettes are available either on pre-terminated
trunks or kitted with field-terminated eXtreme® CAT 6A or
CAT 6 connectors. See page A18 for field-terminated copper
cassette kits.
Make to order! e2XHD COPPER TRUNK ASSEMBLY OPTIONS
CABLE TYPE CABLE RATING # OF
CABLES
CABLE
LENGTH
CABLE
COLOR* INDIVIDUAL JACK COLOR CASSETTE
JACK COLOR
TERMINATION
OPTIONS
CAT 6A UTP CMP, CMR, LSZH 6 10-295 feet
3-90 meters Blue
White, Light Almond, Ivory, Yellow,
Orange, Crimson, Red, Purple,
Blue, Green, Grey, Black, Brown
Black, Blue,
Green, Red,
Yellow
Jack, Plug,
Open, Cassette
CAT 6A
NCHT UTP LSZH 6 10-295 feet
3-90 meters Blue
White, Light Almond, Ivory, Yellow,
Orange, Crimson, Red, Purple,
Blue, Green, Grey, Black, Brown
Black, Blue,
Green, Red,
Yellow, White
Jack, Plug,
Open
CAT 6 UTP CMP, CMR, LSZH 6 6-295 feet
2-90 meters Blue
White, Light Almond, Ivory, Yellow,
Orange, Crimson, Red, Purple,
Blue, Green, Grey, Black, Brown
Black, Blue,
Green, Red,
Yellow, White
Jack, Plug,
Open, Cassette
*Additional cable colors may be available, but would require extended lead time. Contact Inside Sales at 800.722.2082 for more details.
All trunks utilize solid conductor cable.
For assistance customizing your copper trunks, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
BREAKOUT & ALIGNMENT OPTIONS
Depending on the configuration chosen, dierent minimum breakout lengths apply. Choose from five dierent
alignment options, or contact Tech Support at 800.824.3005 to discuss a custom alignment option. e2XHD Copper
Trunks will always have an EVEN alignment on the cassette end(s).
MINIMUM BREAKOUT LENGTHS ALIGNMENT OPTIONS
Copper Trunks
• 12 cables = 24" minimum
• 8 cables = 20" minimum
• 6 cables = 18" minimum
• Even
• Stagger cable 1 shortest
• Stagger cable 1 longest
• Stagger cable 1 & 2 shortest (plug)
• Stagger cable 1 & 2 longest (plug)
e2XHD Copper Trunks • CAT 6 = 6" minimum
• CAT 6A = 24" minimum
• Even
A32
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
patch cords
& cable assemblies
COPPER
The patented Secure RJ System provides physical security for critical network ports within data center, government,
tech industry, health care, financial, retail, and education applications. Once connected, plugs can only be disengaged
with the color-matched extraction tool. The secure system includes patch cords, port blockers, and extraction tools.
SECURE RJ CABLE ASSEMBLY OPERATION
• Only extraction tools with the same keyed color as the Secure RJ connectors can remove patch cords
• Extraction tool features easy push-pull motion to remove connectors, even in high-density patch panels
SECURE RJ SYSTEM
• Patented design prevents unauthorized and unintentional port access
• Superior locking mechanism requires matching-color extraction tool to release
• Compatible with industry-standard RJ ports in most network equipment, devices, patch panels, and work area outlets
• Works with high-density network equipment and 1RU 48-port patch panels
• Same-color extraction tool disengages color-matched patch cords and port blockers
• Transparent housing allows color coding without blocking visibility to Link/Status LEDs on electronic equipment
• Port blocker prevents unauthorized network connection and protects open, unused ports
• Available in eight transparent color options to reserve, identify, segregate, and secure network ports
• CAT 6A & CAT 6 Secure RJ Patch Cord options available
PATCH CORDS & CABLE ASSEMBLIES | Secure RJ System
Quality & Performance in Every Solution
NEELAM SINGH
Senior Quality Engineer
Neelam performs product-quality audits and internal-process audits that adhere
to the ISO 9001 Quality Management Systems standard. She evaluates and
ensures quality not only during product development but throughout the supply
chain, from the supplier to the end user. Neelam and the rest of the Leviton
quality team play an essential role in ensuring your products deliver fast,
reliable network performance.
A33 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
patch cords
& cable assemblies
COPPER
AB
C
Blue (L) Green (G) Purple (P) Black (B)
White (W) Yellow (Y) Orange (O) Red (R)
PATCH CORDS & CABLE ASSEMBLIES | Secure RJ System
SECURE RJ TRAINING VIDEO
Watch the training video
at leviton.com/videos:
“Secure RJ Copper Systems.”
SECURE RJ SYSTEM
DESCRIPTION PART NO.
[A] CAT 6 SlimLine Patch Cord, with Secure RJ housing on both ends SRJ6†-xx*
[B] Secure RJ Port Blocker, pack of 12 SRJPB-00†
[C] Secure RJ Extraction Tool, pack of 1 SRJET-00†
xx = Length: (05), (10), or (20) feet. Minimum orders and extended lead time may apply. Contact Inside Sales at 800.722.2082 for more details.
† = Patch cord housing, port blocker, and extraction tool colors: Choose from the transparent colors shown in (C) above.
* = Patch cord jacket colors: Choose from the colors at right.
Make to order! SECURE RJ PATCH CORD OPTIONS
CATEGORY CABLE RATING CABLE COLOR CABLE LENGTH SECURE HOUSING COLOR SECURE HOUSING
PLACEMENT
CAT 6A FTP CM (PVC) White, Yellow, Red, Blue, Green,
Grey, Black, Orange 3-72 feet White, Yellow, Red, Blue, Green, Purple,
Black, Orange
Both Ends
One End
CAT 6 UTP CM (PVC) White, Yellow, Red,
Blue, Green, Grey, Black 1-72 feet White, Yellow, Red, Blue, Green, Purple,
Black, Orange
Both Ends
One End
All patch cords utilize stranded cable.
For assistance customizing your patch cords, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
White (W) Red (R) Blue (L)
Patch cord jacket colors below:
A34
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
patch cords
& cable assemblies
COPPER
COPPE
R
FEATURED
PRODUCTS
CAT 6A Channel-Rated
& Component-Rated
Connectors A37
CAT 6A Shielded
Connectors A40
category-rated connectors
Ensure exceptional data connectivity performance with the patented
QuickPort® line of category-rated connectors. Choose from channel-rated
or best-in-class component-rated solutions at every performance level,
from eXtreme® CAT 6A for 10G networks to legacy voice grade and USOC.
For sensitive environments, shielded connectors in CAT 6A, 6, and 5e offer
enhanced EMI/RFI protection and signal isolation.
New
CATEGORY-RATED CONNECTORS | QuickPort® UTP Highlighted Features
CONE OF SILENCE®
The patented Cone of Silence (CoS) is constructed with an advanced polymer material that surrounds
the rear of the connector for superior alien crosstalk (AXT) suppression in CAT 6A connectors.
PAIR SEPARATION TOWERS
Included in all eXtreme® 6A, eXtreme 6+, and GigaMax® 5e+ connectors, the towers make termination
quick and easy by physically separating each wire pair with a small, pointed tower.
DUAL-LAYER, TEAR-AWAY CONNECTOR LABELS
Patented connector wiring-scheme labels make field termination faster and
easier. Our patented tear-away, dual-wiring labels feature easy-to-read,
double-layer diagrams. The top layer shows the T568B configuration for
commercial installations. Peel back the easy-lift label to access the residential
T568A schematic.
RETENTION FORCE TECHNOLOGY (RFT)
Patented Retention Force Technology, found in all CAT 6A, 6+, and 5e+ connectors, as well
as in CAT 6 and 5e 110-style panels, provides unequaled durability and reliability for demanding
applications. Its key feature, the polymer spring, supports tines and increases their resilience.
QUICKPORT
Interchangeable QuickPort components allow you to create the perfect mix of voice,
data, video, and audio for any application. The QuickPort family of connectors and inserts
are compatible in any QuickPort housing, including over 180 patch panels and wallplates.
Available in 13 TIA 606-B compatible colors.
CUTTING LEDGE
Designed to work flawlessly with the 110 punchdown tool. Eliminates the risk of double
punching that causes contractors to lose time on a job.
1
2
3
5
1
2
3
4
4
5
6
6
A36
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
category-rated
connectors
COPPER
QUICKPORT CAT 6A UTP CONNECTORS
eXtreme® CAT 6A component-rated UTP connectors include several exclusive performance-enhancing features:
• Component-rated connector features a metalized body, triple-stage compensation, and other design features
that suppress alien crosstalk (AXT)
• Conductor retention feature holds wires during termination
• Ideal for data centers where short link performance is critical
All eXtreme CAT 6A connectors include a wealth of features that deliver ease-of-use and superior performance:
• Independently verified and guaranteed by Intertek (ETL) to exceed ANSI/TIA-568-C.2 component, permanent link,
and channel margins, and IEEE 10GBASE-T (802.3an) requirements, as well as the ISO/IEC 11801 2nd Edition,
CAT 6A Component, and Class EA standard
• Patented Cone of Silence helps suppress AXT
• Patented Retention Force Technology (RFT) protects against damage from 4- or 6-pin plugs
• Pair Separation Towers facilitate quick, eective termination
• Patented dual-layer T568A and T568B label with larger wiring diagrams
• Backward compatible with CAT 6 and 5e systems, and 1000BASE-T applications
• Provide seamless migration path to 10GBASE-T to maximize return on investment
CAT 6A UTP QUICKPORT CONNECTORS
DESCRIPTION PART NO.
[A] eXtreme CAT 6A UTP Component-Rated QuickPort Connector 6A10G-R*6
[B] eXtreme CAT 6A UTP Channel-Rated QuickPort Connector 6110G-R*6
* = Colors: Choose from any of the colors below.
All Leviton Category-Rated and USOC Connectors are RoHS Compliant.
Green (V) Blue (L)Purple (P)
Crimson (C) Dark
Red (R)
Orange (O) Yellow (Y) Black (E)Grey (G)
Ivory (I)Light
Almond (T)
Brown (B)
White (W)
CATEGORY-RATED CONNECTORS | CAT 6A UTP QuickPort®
A
Front Rear Cone of Silence® installed
B
Front Rear Cone of Silence® installed
FEATURE COMPONENT
RATED
CHANNEL
RATED
Meets ANSI/TIA standard xx
Exceeds ANSI/TIA standard x
Complete end-to-end channel tested xx
Individually certified (tested) component x
Meets channel-link performance xx
Greater permanent-link performance x
Ensures multi-manufacturer channel compatibility
x
SPOTLIGHT Component- vs. Channel-Rated Performance
See "CAT 6A Termination
Instructions" on page X7.
A37 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
category-rated
connectors
COPPER
CATEGORY-RATED CONNECTORS | CAT 6/5e+/5e UTP QuickPort®
EXTREME® CAT 6+ UTP COMPONENT-RATED QUICKPORT CONNECTORS
eXtreme CAT 6+ UTP component-rated QuickPort connectors include several features
that deliver ease-of-use and superior performance:
• Patented Retention Force Technology (RFT) protects tines from damage from 4- or 6-pin plugs
• Pair Separation Towers facilitate quick, eective termination
• Patented dual-layer wiring label simplifies punchdown and reduces rework
• Increased wire retention reduces tine contact failure caused by cable stress and fatigue
• Gas-tight connection at the IDC prevents corrosion
• 110-style rear termination field for easy termination when installed in a wallplate or panel
CAT 5E UTP QUICKPORT CONNECTORS
Leviton oers two CAT 5e connectors, the GigaMax® CAT 5e+ (5G110-xxx) and
5e (5G108-xxx). Both provide 1000BASE-T performance for high-bandwidth applications.
GigaMax CAT 5e+ (5G110) connectors include exclusive performance-enhancing features:
• Component-rated for optimal channel performance
• Patented Retention Force Technology (RFT) protects against damage from 4- or 6-pin plugs
• Pair Separation Towers facilitate quick, eective termination
• Patented dual-layer wiring label simplifies punchdown and reduces rework
CAT 6+/5E+/5E UTP QUICKPORT CONNECTORS
DESCRIPTION PART NO. QUICKPACK® 25/BAG
[A] eXtreme CAT 6+ UTP Component-Rated Connector 61110-R*6 61110-B*6
[B] GigaMax CAT 5e+ UTP Component-Rated Connector 5G110-R*5 5G110-B*5
[C] GigaMax CAT 5e UTP Channel-Rated Connector 5G108-R*5 5G108-B*5
* = Colors: Choose from any of the colors below ^ = Colors: White (W), Ivory (I), Orange (O), Blue (L), and Black (E) ° = Colors: White (W) and Blue (L)
All Leviton Category-Rated and USOC Connectors are RoHS Compliant.
C
Green (V) Blue (L)Purple (P)
Crimson (C) Dark
Red (R)
Orange (O) Yellow (Y) Black (E)Grey (G)
Ivory (I)Light
Almond (T)
Brown (B)
White (W)
BA
SPOTLIGHT QuickPack
See "CAT 6 & 5e Termination
Instructions" on pages X7 and X8.
Save time and reduce packaging waste on large installations with QuickPack, the original bulk quantity
connector package. With the resealable and easy-to-store bag, unused product can be saved until needed.
Each QuickPack bag contains 25 connectors and a minimum of 27 stuer caps. QuickPack is available in
eXtreme 6+, GigaMax 5e+ and 5e, and all 13 connector colors. See table above for part numbers.
A38
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
category-rated
connectors
COPPER
CATEGORY-RATED CONNECTORS | CAT 5/3/USOC QuickPort®
BCA
Green (V) Blue (L)Purple (P)
Crimson (C) Dark
Red (R)
Orange (O) Yellow (Y) Black (E)Grey (G)
Ivory (I)Light
Almond (T)
Brown (B)
White (W)
EFD
CAT 5/3 & USOC UTP QUICKPORT CONNECTORS
• Fit into all QuickPort wallplates and housings
• Full support of voice and low-speed data applications
• CAT 5/3 and 8P8C USOC accept RJ-45 plugs; 6P6C USOC accepts RJ-11 plugs
CONNECTOR ADAPTER BEZELS
Leviton Connector Adapter Bezels allow all QuickPort connectors to be installed into compatible, third-party
wallplates and surface-mount boxes (SMBs).
• Bezel color will be visible after installation
• Packaged individually and sold separately from connectors
• CommScope® bezels fit SYSTIMAX® or Uniprise® wallplates and SMBs
CAT 5/3/USOC UTP QUICKPORT CONNECTORS
DESCRIPTION PART NO.
[A] CAT 5 Connector 41108-R*5
[B] CAT 3 Connector 41108-R*3
USOC Connector, 8P8C 41108-R*8
[C] USOC Connector, 6P6C 41106-R*6
CONNECTOR ADAPTER BEZELS
[D] LexCom Connector Adapter Bezel (connector not included) AB300-00†
[E] CommScope Connector Adapter Bezel (connector not included) AB100-00†
[F] Clipsal® Connector Adapter Bezel (connector not included) AB200-00*
† = Colors: Choose from white or black.
* = Colors: Choose from any of the colors below.
A39 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
category-rated
connectors
COPPER
CATEGORY-RATED CONNECTORS | CAT 6A/6/5e > Shielded QuickPort®
AB
CAT 6A/6/5E COMPONENT-RATED SHIELDED QUICKPORT CONNECTORS
• Independently verified and guaranteed by Intertek (ETL) to exceed ANSI/TIA-568-C.2 component, permanent link,
and channel margins, and IEEE 10GBASE-T (802.3an) requirements, as well as the ISO/IEC 11801 2nd Edition, CAT 6A
Component, and Class EA standard
• Shielding provides electromagnetic interference (EMI) and radio frequency interference (RFI) protection, signal
isolation, and excellent alien crosstalk (AXT) suppression
• Small form factor supports industry-standard density and is compatible with the QuickPort footprint
• Robust die-cast housing
• 270º wide-angle hinge provides easy access and termination
• Tool free, no punchdown tool required; snaps closed when termination is complete
• Compatible with F/UTP, U/FTP, and other common shielded cable types
CAT 6A/6/5E COMPONENT-RATED SHIELDED QUICKPORT CONNECTORS
DESCRIPTION PART NO.
[A] eXtreme® CAT 6A Component-Rated Shielded QuickPort Connector 6ASHD-S6A
[B] eXtreme CAT 6 Component-Rated Shielded QuickPort Connector 6S180-SH6
[C] GigaMax® CAT 5e Component-Rated Shielded QuickPort Connector 5S180-SH5
Use housings designed for shielded connectors. All Leviton Category-Rated and USOC Connectors are RoHS Compliant.
See pages A50 and A54 for wallplates and surface-mount boxes, and pages A15-A16 for patch panels.
C
Leviton shielded patch panels are available in 1RU 24-port and 2RU 48-port
flat and angled options, and accept all CAT 6A, 6, and 5e QuickPort shielded
connectors. They use a stainless-steel “comb” to maintain consistent ground
paths between connectors and the panel, and offer superior protection from
electromagnetic interference (EMI) and radio frequency interference (RFI).
SPOTLIGHT Shielded Patch Panels
See "Shielded Connector Termination
Instructions" on page X8. Or watch the training
video online at leviton.com/videos:
“How to Terminate a Leviton Shielded Connector.” Shielded connectors shown
in Decora
®
stainless wallplate
and black QuickPort insert
SHIELDED APPLICATION
New NewNew
A40
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
category-rated
connectors
COPPER
COPPE
R
FEATURED
PRODUCTS
Multimedia Outlet
System (MOS)
Modules A45
A/V connectivity
Deliver the high-quality signals that are required for today’s technologies
with the Leviton line of A/V (audio/video) connectivity solutions. Connectors
and adapters come in dozens of styles from QuickPort® HDMI®, S-video,
and BNC to RCA, F-type, and many more. For larger multimedia applications,
choose the Multimedia Outlet System (MOS) and configure wallplates with
your choice of snap-in copper, fiber, audio, and video modules.
A/V CONNECTORS & ADAPTERS
• HDMI® connector works with HDMI Type A connectors
• Binding Post and Banana Jack connectors are excellent for advanced audio
• QuickPort Blanks secure unused ports in wallplates and housings for future expansion
• 3.5 mm Stereo Adapter facilitates classroom, workstation, and computer audio applications
• Use BNC connectors for commercial CCTV or commercial video signals
• S-video for enhanced video streams available in feedthrough and 110 termination
• Decora® wallplate inserts with HDMI and DVI connections provide high-definition video with in-wall wiring
QUICKPORT A/V CONNECTORS & ADAPTERS
DESCRIPTION WHITE LT. ALMOND IVORY GREY BLACK BROWN
[A] HDMI Connector, feedthrough 40834-00W 40834-00T 40834-00I — 40834-00E —
[B] USB A/A Connector, feedthrough 40835-00W — 40835-00I 40835-00G — —
[C] 3.5 mm Stereo Adapter,
screw terminal 40839-SWS — 40839-SIS — — —
[D] Blank Insert (pack of 10) 41084-BWB 41084-BTB 41084-BIB 41084-BGB 41084-BEB 41084-BBB
[E] Banana Jack Connector,
red stripe, feedthrough 40837-BWR 40837-BTR 40837-BIR — — —
[F] Banana Jack Connector,
black stripe, feedthrough 40837-BWE 40837-BTE 40837-BIE — — —
[G] Binding Post Connector,
red stripe, feedthrough 40833-BWR 40833-BTR 40833-BIR — 40833-BER 40833-BBR
[H] Binding Post Connector,
black stripe, feedthrough 40833-BWE 40833-BTE 40833-BIE — 40833-BEE 40833-BBE
[I] BNC Connector,
nickel plated, feedthrough 41084-BWF 41084-BTF 41084-BIF 41084-BGF 41084-BEF 41084-BBF
[J] BNC Connector,
gold plated, feedthrough 40832-0BW 40832-0BT 40832-0BI — — —
[K] S-Video Connector, feedthrough 40734-CVW — 40734-CVI — — —
[L] S-Video Adapter, 110 termination 40734-SVW 40734-SVT 40734-SVI 40734-SVG 40734-SVE —
QUICKPORT A/V INSERTS, DECORA
[M] HDMI Insert, feedthrough 41647-00W — 41647-00I — — —
[N] DVI Insert, feedthrough 41648-00W — 41648-00I — — —
A/V CONNECTIVITY | QuickPort® A/V Connectors & Adapters
M
White BrownLight
Almond
Ivory Grey Black
NKI, J LG, HE, F
CA DB
A42
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
A/V connectivity
COPPER
A/V CONNECTIVITY | QuickPort® A/V Connectors > RCA & F-Style
B D
RCA CONNECTORS
• Standard identification colors for component
and composite video
• Ideal for advanced audio
F-CONNECTORS
• Coax connectors ideal for satellite and cable TV
• Nickel- and gold-plated versions are both
SCTE-compliant and support signals up to 3 GHz
A C
QUICKPORT FEEDTHROUGH RCA & F-CONNECTORS (FOR RCA & COAX CABLE)
DESCRIPTION WHITE LT. ALMOND IVORY GREY BLACK BROWN
[A] RCA Connector, gold plated
w/black stripe, feedthrough 40830-BWE 40830-BTE 40830-BIE 40830-BGE 40830-BEE 40830-BBE
RCA Connector, gold plated
w/red stripe, feedthrough 40830-BWR 40830-BTR 40830-BIR 40830-BGR 40830-BER 40830-BBR
RCA Connector, gold plated
w/yellow stripe, feedthrough 40830-BWY 40830-BTY 40830-BIY — — —
RCA Connector, gold plated
w/green stripe, feedthrough 40830-BWV — 40830-BIV — — —
RCA Connector, gold plated
w/blue stripe, feedthrough 40830-BWL — 40830-BIL — — —
[B] F-Connector, nickel plated,
feedthrough 41084-FWF 41084-FTF 41084-FIF 41084-FGF 41084-FEF 41084-FBF
[C] F-Connector, gold plated,
feedthrough 40831-0BW 40831-0BT 40831-0BI — — —
QUICKPORT 110-STYLE RCA CONNECTORS (FOR CAT 6 OR CAT 5E CABLE)
[D] RCA Connector, gold plated
w/red barrel, 110 termination 40735-RRW 40735-RRT 40735-RRI 40735-RRG 40735-RRE —
RCA Connector, gold plated
w/white barrel, 110 termination 40735-RWW 40735-RWT 40735-RWI 40735-RWG 40735-RWE —
RCA Connector, gold plated
w/yellow barrel, 110 termination 40735-RYW 40735-RYT 40735-RYI 40735-RYG 40735-RYE —
RCA Connector, gold plated
w/green barrel, 110 termination 40735-RVW — 40735-RVI — — —
RCA Connector, gold plated
w/blue barrel, 110 termination 40735-RLW — 40735-RLI — — —
RCA Connector, gold plated
w/orange barrel, 110 termination 40735-ROW 40735-ROT 40735-ROI 40735-ROG 40735-ROE —
See color swatches on page A42.
FEEDTHROUGH & 110-STYLE RCA & F-CONNECTORS
Leviton carries a comprehensive selection of RCA and F-connectors in both feedthrough and 110 termination.
Body colors match Leviton housings; barrel colors are industry standard.
A43 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
A/V connectivity
COPPER
A, B C-E F, G H, I
COMPRESSION, CRIMP-ON & TWIST-ON RCA & F CONNECTORS
DESCRIPTION RG-59 CABLE RG-6 CABLE RG-6 QUAD SHIELD
RCA Compression Connector (colored rings included) — — [A] 40985-CRU
Compression F-Connector (colored rings included) — — [B] 40985-CPF
F-Connectors, one-piece crimp-on (bag of 100) [C] 40985-1P9 [D] 40985-1P6 [E] 40985-0Q6
F-Connectors, two-piece crimp-on (bag of 100) [F] 40985-2P9 [G] 40985-2P6 —
F-Connectors, twist-on (bag of 100) [H] 40985-TW9 [I] 40985-TW6 —
See page A67 for master compression and crimping tools.
RCA CONNECTORS
• RCA compression connectors include six
color rings for signal identification
• RCA compression connectors offer high-quality
installations using RG-6 quad shield cable
F-CONNECTORS
• Compression F-connectors offer high-quality
installations using quad shield cable
• RG-6 connectors available in one- and two-piece
twist-on and crimp-on styles
A/V CONNECTIVITY | A/V Connectors > RCA & F-Style
COMPRESSION, CRIMP-ON & TWIST-ON RCA & F-CONNECTORS
Leviton compression, crimp-on, and twist-on connectors are ideal for more specialized A/V applications. Compression
connectors, available stand-alone or with QuickPort® housings, oer an airtight seal and secure fitting for increased
cable retention. Crimp-on and twist-on connectors are an economical solution for less demanding applications.
SPOTLIGHT QuickPort Inserts For Decora® Wallplates
Install QuickPort category-rated and
A/V connectors in any Decora or Decora
Plus wallplate using QuickPort Decora
Inserts. Choose from one-port to six-
port inserts and six different colors. For
options, see page A51.
A44
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
A/V connectivity
COPPER
Three - 1 Unit High One - 1 Unit High
One - 0.5 Unit High
One - 1.5 Units High
Two - 1.5 Units High One - 1 Unit High
One - 2 Units High
One - 3 Units High
Single-Gang Wallplate
The innovative Multimedia Outlet System (MOS)
consists of a surface-mount box and single- and
dual-gang wallplates that accept a variety of
copper, fiber, and A/V connectors. The system is
ideal for multimedia applications in conference
rooms, training rooms, classrooms, auditoriums,
and other areas.
A/V CONNECTIVITY | Multimedia Outlet System
MULTIMEDIA OUTLET SYSTEM (MOS)
• Front-load installation ensures simple moves, adds, and changes
• Modules are available in 0.5, 1, 1.5, 2, and 3 unit-high sizes
• Surface-mount housings accept 1 unit-high module only
• Plates accept 3 units high total
• Accommodates a combination of QuickPort® connectors and larger A/V components
such as 3-port composite/component RCA and HD-15 connectors
• Allows for flexibility in applications where deployment of a variety of voice, data,
audio, and visual systems is needed
SAMPLE CONFIGURATIONS FOR MOS WALLPLATES
The MOS system allows you to customize wallplates with any
combination of voice, data, audio, and video connectivity.
A/V connector module options include VGA, RCA component,
and RCA composite video, while QuickPort adapter modules
expand your options to include QuickPort category-rated
connectors, HDMI, DVI, USB, S-video, F-connectors, and more.
Blank inserts are also available to create a finished look when
building in extra capacity for future growth.
CAT 6 Connector in a
1-Unit-High Module
QuickPort RCA in a
1-Unit-High Module
1-Unit-High
Component Video
RCA Module
QuickPort HDMI®
Connector in a
1-Unit-High Module
ID Window
INSTALLATION VIDEOS
Watch the training videos
at leviton.com/videos:
"Enhanced MOS RCA
Module Installation" and
"Enhanced MOS VGA
Module Installation."
For fiber optic MOS products
see pages B65-B66.
SPOTLIGHT QuickPort & MOS Compatibility
A45 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
A/V connectivity
COPPER
A/V CONNECTIVITY | Multimedia Outlet System
Light
Almond
White Ivory Grey Black
MULTIMEDIA OUTLET SYSTEM HOUSINGS
DESCRIPTION WHITE LT. ALMOND IVORY GREY BLACK
[A] Single-Gang Wallplate 41290-SMW 41290-SMT 41290-SMI 41290-SMG 41290-SME
[B] Dual-Gang Wallplate 41290-DMW 41290-DMT 41290-DMI 41290-DMG 41290-DME
[C] Surface-Mount Box* 41296-MMW 41296-MMT 41296-MMI 41296-MMG 41296-MME
[D] Decora® Insert, holds one 1-unit-high MOS Module 41649-00W — 41649-00I — —
[E] Fiber Storage/Spacer Ring 41290-DRW — 41290-DRI 41290-DRG 41290-DRE
MULTIMEDIA OUTLET SYSTEM A/V CONNECTOR MODULES (ALL MODULES ARE 1 UNIT HIGH)
[F] VGA PC Module, 110-style termination^ 41295-VPW 41295-VPT 41295-VPI 41295-VPG —
[G] VGA Monitor Module, 110-style termination^ 41295-VMW 41295-VMT 41295-VMI 41295-VMG —
[H] VGA/HD15 Module, screw terminal 41295-HDW — 41295-HDI — —
[I] VGA/HD15 Module, feedthrough 41293-HDW 41293-HDT 41293-HDI 41293-HDG 41293-HDE
VGA/HD15 Module, empty 41291-DBW 41291-DBT 41291-DBI 41291-DBG 41291-DBE
[J] RCA Component Video Module,
110-style termination (red, green, blue) 41292-DEW 41292-DET 41292-DEI — —
[K] RCA Composite Video Module,
110-style termination (red, white, yellow) 41292-AEW 41292-AET 41292-AEI — —
[L] 3-Port RCA Module (red, black, yellow), feedthrough 41292-3RW 41292-3RT 41292-3RI 41292-3RG 41292-3RE
[M] 3-Port RCA Module (red, green, blue), feedthrough 41292-3DW 41292-3DT 41292-3DI 41292-3DG 41292-3DE
[N] HDMI® Module, feedthrough 41290-HDW 41290-HDT 41290-HDI 41290-HDG 41290-HDE
MULTIMEDIA OUTLET SYSTEM QUICKPORT® ADAPTERS & BLANK MODULES
[O] 1-Port QuickPort Module (1 unit high) 41291-1MW 41291-1MT 41291-1MI 41291-1MG 41291-1ME
[P] 2-Port QuickPort Module (1 unit high) 41291-2QW 41291-2QT 41291-2QI 41291-2QG 41291-2QE
[Q] 2-Port Angled QuickPort Module (1.5 units high) 41294-2QW 41294-2QT 41294-2QI 41294-2QG 41294-2QE
[R] Blank Module (0.5 unit high) 41295-5BW 41295-5BT 41295-5BI 41295-5BG 41295-5BE
[S] Blank Module (1 unit high) 41291-1BW 41291-1BT 41291-1BI 41291-1BG 41291-1BE
[T] Blank Module (1.5 units high) 41294-2BW 41294-2BT 41294-2BI 41294-2BG 41294-2BE
[U] Blank Module (2 units high) 41292-2BW 41292-2BT 41292-2BI 41292-2BG 41292-2BE
* = Surface-mount box is not compatible with 41295-V**, 41292-D**, and 41292-A**.
^ = 110-Style VGA modules require both PC and Monitor modules used in pairs to operate.
This applies to F and G only.
ABCDE
LKJ
IHF, G MN
OP Q R ST U
Leviton MOS with 110-style termination oers
fast, easy punch-down using CAT 5e or higher
UTP or shielded cable. This allows use of remnant
cable and provides a simple migration path to
digital without changes to in-wall cables.
41295-VMW 41292-DEW
A46
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
A/V connectivity
COPPER
COPPE
R
FEATURED
PRODUCTS
Renu wallplates
& inserts A52
wallplates & housings
Customize your work-area outlets with an extensive selection of wallplates
and housings. We have the colors and styles you need for virtually any type of
application. The Renu® system offers tool-free, snap-on wallplate installation
and QuickPort® compatibility. Additional wallplates come in plastic and stainless;
1 to 12 ports in single- or dual-gang; wall, surface, or furniture mount; IP67 rated
for industrial environments; even pre-configured for telephone and video.
A majority of our datacom wallplates are now designed and manufactured
in the United States.
White BrownLight
Almond
Ivory Grey Black
[A] QUICKPORT SINGLE-GANG WALLPLATES
DESCRIPTION WHITE LT. ALMOND IVORY GREY BLACK BROWN
6-Port Wallplate 41080-6WP 41080-6TP 41080-6IP 41080-6GP 41080-6EP 41080-6BP
4-Port Wallplate 41080-4WP 41080-4TP 41080-4IP 41080-4GP 41080-4EP 41080-4BP
3-Port Wallplate 41080-3WP 41080-3TP 41080-3IP 41080-3GP 41080-3EP 41080-3BP
2-Port Wallplate 41080-2WP 41080-2TP 41080-2IP 41080-2GP 41080-2EP 41080-2BP
1-Port Wallplate 41080-1WP 41080-1TP 41080-1IP 41080-1GP 41080-1EP 41080-1BP
[B] QUICKPORT SINGLE-GANG WALLPLATES WITH ID WINDOWS
6-Port Wallplate 42080-6WS 42080-6TS 42080-6IS 42080-6GS 42080-6ES —
4-Port Wallplate 42080-4WS 42080-4TS 42080-4IS 42080-4GS 42080-4ES —
3-Port Wallplate 42080-3WS 42080-3TS 42080-3IS 42080-3GS 42080-3ES —
2-Port Wallplate 42080-2WS 42080-2TS 42080-2IS 42080-2GS 42080-2ES —
1-Port Wallplate* 42080-1WS 42080-1TS 42080-1IS 42080-1GS 42080-1ES —
[C] QUICKPORT DUAL-GANG WALLPLATES WITH ID WINDOWS
12-Port Wallplate 42080-12W 42080-12T 42080-12I 42080-12G 42080-12E —
8-Port Wallplate 42080-8WP 42080-8TP 42080-8IP 42080-8GP 42080-8EP —
6-Port Wallplate 42080-6WP 42080-6TP 42080-6IP 42080-6GP 42080-6EP —
4-Port Wallplate 42080-4WP 42080-4TP 42080-4IP 42080-4GP 42080-4EP —
3-Port Wallplate 42080-3WP 42080-3TP 42080-3IP 42080-3GP 42080-3EP —
2-Port Wallplate† 42080-2WP 42080-2TP 42080-2IP 42080-2GP 42080-2EP —
1-Port Wallplate† 42080-1WP 42080-1TP 42080-1IP 42080-1GP 42080-1EP —
Wallplates are sold empty. See pages A37-A43 for QuickPort connectors.
*Single-gang 1-Port Wallplate has only one ID window on top.
†Dual-gang 1- and 2-Port Wallplates have only two ID windows on top.
WALLPLATES & HOUSINGS | QuickPort® Wallplates > Plastic
QUICKPORT STANDARD PLASTIC WALLPLATES
• Compatible with all QuickPort connectors and adapters
• Manufactured from ABS plastic for superior resistance to impact,
chemicals, and solvents, as compared to other plastics
• A variety of color choices, with color-matched screws
• cULus Listed, fire-retardant material rated UL 94V-0
BA C
2.75"
4.53"
4.63"
4.53"
Single-Gang Dual-Gang
Find wallplate Labeling Solutions on page A68.
A48
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
wallplates & housings
COPPER
• Compatible with all QuickPort adapters and connectors,
including shielded
•
Manufactured from 304 stainless steel in a brushed finish
to provide corrosion resistance in a non-magnetic material
•
Available in single- and dual-gang, with or without ID windows
• Angled wallplate ports facilitate proper front and rear
cable bend radius
• Wall-phone wallplates are available in flush and recessed
options to accommodate various phone styles
• cULus Listed
WALLPLATES & HOUSINGS | QuickPort® Wallplates > Stainless Steel
BA DC
Dual-Gang Single-Gang
4.50"
2.78" 4.59"
4.53"
2.76"
.58"
.65"
.17"
.44"
.09"
2.76"
.58"
3.95"
3.28"
.17"
.09"
4.53"
.78"
Wall-Phone Wallplate Wall-Phone Wallplate, Recessed
4-Port, Single-Gang
Angled
8-Port, Dual-Gang
Angled
4.59"
4.50"
2.78" .96"
QUICKPORT SINGLE-GANG STAINLESS-STEEL WALLPLATES
DESCRIPTION [A] STANDARD [B] W/ ID WINDOW
6-Port Wallplate 43080-1S6 43080-1L6
4-Port Wallplate 43080-1S4 43080-1L4
3-Port Wallplate 43080-1S3 43080-1L3
2-Port Wallplate 43080-1S2 43080-1L2
1-Port Wallplate 43080-1S1 43080-1L1
QUICKPORT DUAL-GANG STAINLESS-STEEL WALLPLATES
12-Port Wallplate 43080-S12 43080-L12
8-Port Wallplate 43080-2S8 43080-2L8
6-Port Wallplate 43080-2S6 43080-2L6
4-Port Wallplate 43080-2S4 43080-2L4
2-Port Wallplate 43080-2S2 43080-2L2
[C] QUICKPORT ANGLED STAINLESS-STEEL WALLPLATES
W/ ID WINDOWS
DESCRIPTION PART NO.
4-Port Angled Wallplate, single-gang 43081-1L4
8-Port Angled Wallplate, dual-gang 43081-2L8
[D] QUICKPORT STAINLESS-STEEL WALL-PHONE WALLPLATES
Stainless-Steel Wall-Phone Wallplate 4108W-0SP
Stainless-Steel Wall-Phone Wallplate, recessed 4108W-1SP
Wallplates are sold empty. See pages A37-A43 for QuickPort connectors.
See page A62 for voice-grade wall-phone jacks.
See page X15 for more information on stainless-steel materials.
QUICKPORT STAINLESS-STEEL WALLPLATES
LABELS
DESCRIPTION PART NO.
Label Kit for QuickPort Stainless-Steel Wallplates* 43080-IDW
Pre-printed Port Labels, black ink, 10 sheets per package 41080-LEB
* = Also applicable to ID window wallplates on page A50.
A49 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
wallplates & housings
COPPER
QUICKPORT ANGLED, MIDWAY & LARGE CONNECTOR WALLPLATES
• Compatible with all QuickPort connectors and adapters
• Angled and large connector wallplates are high-quality ABS plastic,
which provides superior resistance to impacts, chemicals, and solvents
as compared to other plastics
• Midway wallplates are durable nylon with a smooth finish and help to hide
irregular drywall cuts or flaws around outlets
• Large connector wallplates are ideal for use with larger-sized shielded connectors
• Angled wallplates facilitate optimal cable management and ensure proper
bend radius in front and back of connector
• cULus Listed, fire-retardant material rated UL 94V-0
WALLPLATES & HOUSINGS |
QuickPort® Wallplates > Special Configurations
[A] QUICKPORT ANGLED SINGLE-GANG WALLPLATES
DESCRIPTION WHITE LT. ALMOND IVORY BROWN
4-Port Wallplate 41081-4WP 41081-4TP 41081-4IP —
2-Port Wallplate 41081-2WP 41081-2TP 41081-2IP —
4-Port Wallplate, w/ ID windows 42081-4WS 42081-4TS 42081-4IS —
2-Port Wallplate, w/ ID windows 42081-2WS 42081-2TS 42081-2IS —
[B] QUICKPORT MIDWAY SINGLE-GANG WALLPLATES
6-Port Wallplate 41091-6WN 41091-6TN 41091-6IN 41091-6BN
4-Port Wallplate 41091-4WN 41091-4TN 41091-4IN 41091-4BN
3-Port Wallplate 41091-3WN 41091-3TN 41091-3IN 41091-3BN
2-Port Wallplate 41091-2WN 41091-2TN 41091-2IN 41091-2BN
1-Port Wallplate 41091-1WN 41091-1TN 41091-1IN 41091-1BN
[C] QUICKPORT SINGLE-GANG WALLPLATES FOR LARGE CONNECTORS
4-Port Wallplate 41080-4WL 41080-4TL 41080-4IL —
2-Port Wallplate 41080-2WL 41080-2TL 41080-2IL —
4-Port Wallplate, w/ ID windows 42080-4WL 42080-4TL 42080-4IL —
2-Port Wallplate, w/ ID windows 42080-2WL 42080-2TL 42080-2IL —
BA C
2.75"
4.53"
Angled Single-Gang
and Single-Gang for
Large Connectors
Midway Single-Gang
4.87"
3.12"
White BrownLight
Almond
Ivory
Find wallplate Labeling Solutions on page A68.
A50
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
wallplates & housings
COPPER
QUICKPORT DECORA MULTIMEDIA INSERTS
DESCRIPTION WHITE LT. ALMOND IVORY GREY BLACK BROWN
[A] 6-Port Insert 41646-00W 41646-00T 41646-00I 41646-0GY 41646-00E 41646-00B
[B] 4-Port Insert 41644-00W 41644-00T 41644-00I 41644-0GY 41644-00E 41644-00B
[C] 3-Port Insert 41643-00W 41643-00T 41643-00I 41643-0GY 41643-00E 41643-00B
[D] 2-Port Insert 41642-00W 41642-00T 41642-00I 41642-0GY 41642-00E 41642-00B
[E] 1-Port Insert 41641-00W 41641-00T 41641-00I 41641-0GY 41641-00E 41641-00B
Blank Insert 80414-00W 80414-00T 80414-00I 80414-0GY 80414-00E 80414-000
QUICKPORT DECORA TYPE 106 DUPLEX INSERTS
[F] 2-Port Duplex Insert 41087-2WP 41087-2TP 41087-2IP 41087-2GP 41087-2EP —
[G] 4-Port Duplex Insert 41087-QWP 41087-QTP 41087-QIP 41087-QGP 41087-QEP —
QUICKPORT FLOOR BOX ASSEMBLY W/ INSERT, BRASS PLATE & SCREW CAP
DESCRIPTION PART NO.
Floor Box Assembly, one F-connector module, one blank module 41650-00F
Floor Box Assembly, one 6P6C connector, one blank module 41650-006
Floor Box Assembly, two port, includes one blank module 41652-000
[H] Floor Box Assembly, two 6P6C connectors 41652-006
Floor Box Assembly, one 6P6C connector, one F-connector module 41652-06F
Inserts A-G are sold empty. See pages A37-A43 for QuickPort connectors.
Floor Box Assemblies sold as complete kits only, individual components not sold separately.
HEG
WALLPLATES & HOUSINGS |
QuickPort® Decora® Inserts & Floor Box Assemblies
QUICKPORT DECORA & DUPLEX INSERTS
• Combine voice, data, and A/V connectors in popular Decora and Duplex
wallplate formats
• Decora inserts are compatible with Decora and Decora Plus wallplates
QUICKPORT FLOOR BOX ASSEMBLIES
• Combine voice, data, and A/V connectors in convenient in-floor locations
• Floor box assemblies include brass wallplate and screw cap
• Inserts and connectors are ivory
Inserts fit Decora and 106-style Duplex
wallplates found on pages A63-A64.
ABCD F
White BrownLight
Almond
Ivory Grey Black
Find wallplate Labeling Solutions on page A68.
A51 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
wallplates & housings
COPPER
WALLPLATES & HOUSINGS | Renu®
Renu is the smart electrical and data connectivity system. QuickPort® compatible wallplates snap on and o quickly
and easily with no tools, simplifying installation and ongoing maintenance. Choose from wallplates and inserts in
White On White, Navajo Sand, Onyx Black, and Stainless Appearance.
RENU WALLPLATES AND INSERTS
• Screwless wallplates easily snap on to any Renu insert or device
• Inserts accept all QuickPort connectors
• Slightly larger size covers wall imperfections
• Tongue and groove design simplifies alignment in multi-gang installations
• Adapter ring allows use of Decora® device with Renu wallplates
•
Available in four standard colors to coordinate with the commercial-grade QuickPort line (white, light almond, black, stainless)
• Additional wallplate colors for switches, dimmers, and outlets available; visit leviton.com/renu
• cULus Listed
• 1 year limited warranty
RENU WALLPLATES & INSERTS
DESCRIPTION WHITE ON WHITE NAVAJO SAND ONYX BLACK STAINLESS APPEARANCE
[A] Snap-In Blank Module RE640-BWW RE640-BNS RE640-BOB —
Four-Gang Wallplate REWP4-0WW REWP4-0NS REWP4-0OB —
[B] Three-Gang Wallplate REWP3-0WW REWP3-0NS REWP3-0OB —
[C] Dual-Gang Wallplate REWP2-0WW REWP2-0NS REWP2-0OB REWM2-STS
[D] Single-Gang Wallplate REWP1-0WW REWP1-0NS REWP1-0OB REWM1-STS
[E] 6-Port Insert RE640-WW6 RE640-NS6 RE640-OB6 —
[F] 4-Port Insert RE640-WW4 RE640-NS4 RE640-OB4 —
[G] 3-Port Insert RE640-WW3 RE640-NS3 RE640-OB3 —
[H] 2-Port Insert RE640-WW2 RE640-NS2 RE640-OB2 —
[I] 1-Port Insert RE640-WW1 RE640-NS1 RE640-OB1 —
Find wallplate Labeling Solutions on page A68.
Onyx
Black
White On
White
Navajo
Sand
HGFEC DBA
Stainless
Appearance
I
Mix and match for an upscale
finish to your project.
A52
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
wallplates & housings
COPPER
WALLPLATES & HOUSINGS | QuickPort® Boxes, Modules & Accessories
G
Standard- and extended-depth faceplates are compatible when used with Herman Miller G1189A Reducer, available from Herman Miller dealers.
2- & 4-Port Standard Depth
Modular Faceplate
Fits openings of approximately
1.38" x 2.63" (1 ⅜" x 2 ⅝")
Herman Miller 2- & 4-Port
Modular Faceplate
Fits openings of approximately
1.88" x 2.98" (1 ⅞" x 2 ⅞")
4-Port Extended Depth Modular
Faceplate for installation into
shallow raceway channels
Fits openings of approximately
1.38" x 2.63" (1 ⅜" x 2 ⅝")
M-O P
E
BC FA
L
KJIH
Q
QUICKPORT BOXES, MODULES & ACCESSORIES
• Surface-mount boxes and back boxes have breakouts
to match common surface-mount raceway systems
• 4S089 products are designed to work with Leviton
shielded or eXtreme® CAT 6A connectors to allow proper
bend radius control
QUICKPORT MODULAR FURNITURE PRODUCTS
• Front-load installation of module ensures simple moves,
adds, and changes without removing the furniture
channel cover
• Faceplates are cULus Listed
QuickPort Surface-Mount Boxes are easily field configured with QuickPort connectors (sold separately) and contain
knockouts to accommodate raceway and cable entry. They can be mounted with screws or adhesive mounting tape
(both provided), or with magnets or modular furniture brackets (sold separately).
QuickPort Modular Furniture Products oer simple snap-in installation and an attractive streamlined appearance.
Furniture faceplates accept QuickPort connectors and snap easily and snugly into standard modular furniture.
Modular Furniture Brackets facilitate installation of Leviton surface-mount boxes or faceplates with back boxes.
D
A53 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
wallplates & housings
COPPER
QUICKPORT SURFACE-MOUNT BOXES
DESCRIPTION WHITE IVORY GREY BLACK
[A] 12-Port Surface-Mount Box, 7.60" W x 5.02" D x 1.13" H 41089-12W 41089-12I 41089-12G 41089-12E
[B] 6-Port Surface-Mount Box, 6.38" W x 3.22" D x 1.08" H 41089-6WP 41089-6IP 41089-6GP 41089-6EP
[C] 4-Port Surface-Mount Box, 4.77" W x 3.21" D x 1.05" H 41089-4WP 41089-4IP 41089-4GP 41089-4EP
[D] 2-Port Surface-Mount Box, 2.52" W x 2.22" D x 1.10" H 41089-2WP 41089-2IP 41089-2GP 41089-2EP
[E] 1-Port Surface-Mount Box, 1.42" W x 2.22" D x 1.10" H 41089-1WP 41089-1IP 41089-1GP 41089-1EP
[F] 2-Port Surface-Mount Box for Shielded Connectors*,
2.5" W x 3.00" D x 1.22" H 4S089-2WP 4S089-2IP — —
[G] 4-Port Surface-Mount Box for Shielded Connectors*,
5.6" W x 5.20" D x 1.22" H 4S089-4WP 4S089-4IP — —
SINGLE- AND DUAL-GANG SURFACE-MOUNT BACK BOXES
[H] Single-Gang Standard Back Box, 4.72" H x 2.96" W x 1.89" D 42777-1WA 42777-1IA 42777-1GA 42777-1EA
[I] Single-Gang Shallow Back Box, 4.72" H x 2.96" W x 1.45" D 42777-1WB 42777-1IB 42777-1GB 42777-1EB
[J] Dual-Gang Standard Back Box, 4.72" H x 4.77" W x 1.89" D 42777-2WA 42777-2IA 42777-2GA 42777-2EA
[K] Dual-Gang Shallow Back Box, 4.72" H x 4.77" W x 1.45" D 42777-2WB 42777-2IB 42777-2GB 42777-2EB
MAGNETS AND MODULAR FURNITURE BRACKETS
DESCRIPTION (Use one magnet for 2-port surface-mount housing. Use two magnets for 4-, 6-, and 12-port
surface-mount housings and single- and dual-gang surface-mount back boxes.) PART NO.
[L] Set of 4 Magnets, 1.00" H x 0.84" W x 0.30" D 41030-SMJ
MODULAR FURNITURE BRACKETS
DESCRIPTION PART NO.
[M] Steelcase 9000®, Haworth®, Knoll®, Allsteel®, Westinghouse®, and Teknion®49222-BLK
[N] Herman Miller Ethospace® and Steelcase Avenir®49222-ESP
[O] Herman Miller Action Oce®49222-HAO
QUICKPORT MODULAR FURNITURE FACEPLATES
DESCRIPTION WHITE IVORY GREY BLACK
2-Port Standard Depth 49910-SW2 49910-SI2 49910-SG2 49910-SE2
[P] 4-Port Standard Depth w/ 1 QuickPort Blank 49910-SW4 49910-SI4 49910-SG4 49910-SE4
4-Port Extended Depth w/ 1 QuickPort Blank 49910-EW4 49910-EI4 49910-EG4 49910-EE4
2-Port Herman Miller 49910-HW2 49910-HI2 49910-HG2 49910-HE2
[Q] 4-Port Herman Miller w/ 1 QuickPort Blank 49910-HW4 49910-HI4 49910-HG4 49910-HE4
*For shielded connectors and large bend radius cables.
White Ivory Grey Black
WALLPLATES & HOUSINGS | QuickPort® Boxes, Modules & Accessories
A54
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
wallplates & housings
COPPER
WALLPLATES & HOUSINGS | DuraPort® Industrial Connectivity
IF
DURAPORT CONNECTOR HOUSING
• Twist-lock mating allows for easy installation
and provides a robust seal
• Compatible with eXtreme® 6+ and GigaMax® 5e+
QuickPort® connectors
• Captive connector cap with retainer protects
and seals unused ports
DURAPORT STAINLESS-STEEL WALLPLATE
• Patented overmolded gasket on wallplates
provides a watertight fit
• Compatible with standard NEMA boxes
DURAPORT OUTLET KIT
• DuraPort components packaged together
for added convenience
• Kits include connector housing,
connector cap, and stainless-steel wallplate
• Patch cords and QuickPort connectors are
sold separately
DURAPORT PATCH CORDS
• Available in industrial plug to industrial plug,
and industrial plug to RJ-45 plug configurations
• Patch cords are CAT 6 rated
B-EA
G H
The DuraPort industrial wallplate is manufactured with a patented, industry-first,
overmolded gasket that provides a watertight fit. The gasket seals not only the
edge of the plate where it meets the wall, but also extends behind each mounting
screw hole for a complete seal without the need for conventional O-rings. In
addition to providing exceptional sealing, the integrated wallplate and gasket
also help to position and retain screws during installation, so the wallplate aligns
perfectly and seats flush every time. All this translates into IP67-class protection
that safeguards your network in severe conditions and resists moisture, dust,
corrosion, acids, oils, and vibration.
SPOTLIGHT Industrial Wallplate Design
A55 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
wallplates & housings
COPPER
DURAPORT INDUSTRIAL CONNECTOR HOUSINGS
DESCRIPTION PART NO.
[A] CAT 6 Industrial Connector Housing w/ Connector Cap (product supplied w/ black 61110 connector) D6706-00E
CAT 5e Industrial Connector Housing w/ Connector Cap (product supplied w/ black 5G110 connector) D675E-00E
Housing w/ Connector Cap (connector not included) D6700-00E
Connector Cap (connector and housing not included) D6701-00E
DURAPORT INDUSTRIAL STAINLESS-STEEL WALLPLATES
[B] Industrial Wallplate, stainless steel, 1-port, single-gang D6710-1S1
[C] Industrial Wallplate, stainless steel, 2-port, single-gang D6710-1S2
[D] Industrial Wallplate, stainless steel, 2-port, dual-gang D6710-2S2
[E] Industrial Wallplate, stainless steel, 4-port, dual-gang D6710-2S4
DURAPORT INDUSTRIAL PATCH CORDS, CAT 6
[F] Industrial Plug to Industrial Plug, 3' D6720-03E
Industrial Plug to Industrial Plug, 5' D6720-05E
Industrial Plug to Industrial Plug, 7' D6720-07E
Industrial Plug to Industrial Plug, 10' D6720-10E
Industrial Plug to Industrial Plug, 15' D6720-15E
Industrial Plug to Industrial Plug, 20' D6720-20E
[G] Industrial Plug to RJ-45 Plug, 3' D6721-03E
Industrial Plug to RJ-45 Plug, 5' D6721-05E
Industrial Plug to RJ-45 Plug, 7' D6721-07E
Industrial Plug to RJ-45 Plug, 10' D6721-10E
Industrial Plug to RJ-45 Plug, 15' D6721-15E
Industrial Plug to RJ-45 Plug, 20' D6721-20E
DURAPORT INDUSTRIAL OUTLET KITS
Industrial Outlet Kit, stainless steel, 1-port, single-gang D670K-1S1
[H] Industrial Outlet Kit, stainless steel, 2-port, single-gang D670K-1S2
Industrial Outlet Kit, stainless steel, 2-port, dual-gang D670K-2S2
[I] Industrial Outlet Kit, stainless steel, 4-port, dual-gang D670K-2S4
IP67-RATED INGRESS PROTECTION
IP ratings are based on International
Standard IEC 60529. All DuraPort products
are IP67 rated as highlighted in the charts.
See page X15 for more information on NEMA and IEC enclosure
certification.
PROTECTION AGAINST SOLID OBJECTS
0None
1Solid objects larger than 50 mm
2Solid objects larger than 12.5 mm
3Solid objects larger than 2.5 mm
4Solid objects larger than 1.0 mm
5Dust
6Dust tight
PROTECTION AGAINST WATER
0None
1Vertically falling water drops
2Vertically falling water drops
(up to 15° angle)
3Spraying water
4Splashing water
5Water jets
6Powerful water jets
7Temporary immersion in water
8Continuous immersion in water
WALLPLATES & HOUSINGS | DuraPort® Industrial Connectivity
A56
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
wallplates & housings
COPPER
AB
EXCELLA WALLPLATE INSERTS & FRAMES
• Inserts available in 1-, 2-, and 4-port flat, and 1- and 2-port angled configurations
• All 1- and 2-port inserts include designation windows
• Inserts accept QuickPort® connectors (sold separately)
• 86 mm x 86 mm frame size conforms to BS 4662 and BS 5733 electrical box standards
• Inserts are white and ship with white wallplate frame
• Colored frames available separately (see colors and part numbers below)
EXCELLA WALLPLATE INSERTS
DESCRIPTION PART NO.
[A] QuickPort Wallplate Insert w/ ID Window, 1-port, empty BL186-P1W
QuickPort Wallplate Insert w/ ID Window, 2-port, empty BL186-P2W
QuickPort Wallplate Insert, 4-port, empty BL186-P4W
[B] QuickPort Angled Wallplate Insert w/ ID Window, 1-port, empty BL186-A1W
QuickPort Angled Wallplate Insert w/ ID Window, 2-port, empty BL186-A2W
Blank Wallplate Insert BL000-00W
EXCELLA METALLIC WALLPLATE FRAMES
Wallplate Frame, pearl yellow BLWP1-PEY
Wallplate Frame, piano black BLWP1-PIB
Wallplate Frame, glossy silver BLWP1-GSS
Wallplate Frame, champagne gold BLWP1-CHG
Wallplate Frame, navy blue BLWP1-NVB
Wallplate Frame, metallic green BLWP1-MEG
Wallplate Frame, hot pink BLWP1-HTP
Wallplate Frame, sky blue BLWP1-SKB
Wallplates sold empty. See pages A37-A43 for QuickPort connectors.
Pearl Yellow G
l
ossy S
il
ver Navy Blue Metallic Green Hot Pink Sky BlueChampagne GoldP
i
ano B
l
ac
k
WALLPLATES & HOUSINGS | 86 mm x 86 mm Excella® British Standard
A57 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
wallplates & housings
COPPER
WALLPLATES & HOUSINGS |
86 mm x 86 mm French, British & LJ6C Style
[A] FRENCH-STYLE WALLPLATE INSERTS
DESCRIPTION PART NO.
French-style Wallplate Insert, 45 mm x 22.5 mm, 1-port, flat, white LI145-1W1
French-style Wallplate Insert, 45 mm x 45 mm, 1-port, flat, white LI145-2W1
French-style Wallplate Insert, 45 mm x 45 mm, 2-port, flat, white LI145-2W2
French-style Wallplate Frame (for use with French-style LI145 inserts only), single-gang, white (special order) LF145-01W
[B] BRITISH-STYLE WALLPLATE INSERTS
British-style Wallplate Insert, 50 mm x 25 mm, 1-port, flat, white LI150-1W1
British-style Wallplate Insert, 50 mm x 25 mm, 1-port, angled, white LI150-AW1
British-style Wallplate Insert, 50 mm x 50 mm, 1-port, flat, white LI150-2W1
British-style Wallplate Insert, 50 mm x 12.5 mm, blank, flat, white LI150-0W0
[C] LJ6C-STYLE WALLPLATE INSERTS
LJ6C-style Wallplate Insert, 37 mm x 22 mm, 1-port, flat, white LI137-1W1
LJ6C-style Wallplate Insert, 37 mm x 22 mm, 1-port, angled, white LI137-AW1
Note: French-style, British-style, and LJ6C-style inserts are not compatible with Excella® wallplates.
ABC
FRENCH-, BRITISH- & LJ6C-STYLE
WALLPLATE INSERTS
• Designed to fit matching 86 mm x 86 mm wallplates
• Accept QuickPort® data connectors (sold separately)
• Include ID window kits for port designation
• Spring-loaded shutters protect connector while not in use
• Available in white ABS plastic
DIMENSIONS
• French-style inserts fit 45 mm x 45 mm openings
• British-style inserts fit 50 mm x 50 mm openings
• LJ6C-style inserts fit 22 mm x 37 mm openings
A58
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
wallplates & housings
COPPER
ABC D
E
WALLPLATES & HOUSINGS | Telephone & Video Wallplates
STANDARD TELEPHONE & VIDEO WALLPLATES
DESCRIPTION WHITE LT. ALMOND IVORY BROWN
[A] Wall Jack, 6P4C 40249-00W 40249-00T 40249-00I —
[B] Wall Jack, 6P4C + 6P4C 40244-00W 40244-00T 40244-00I —
[C] Wall Jack, 6P4C + F-connector 40259-00W 40259-00T 40259-00I —
[D] Wall Jack, F-connector 80781-00W 80781-00T 80781-00I —
[E] Wall Jack, F-connector + F-connector 80782-00W 80782-00T 80782-00I —
Wall Jack, 6P6C 40238-00W — — —
Wall Jack, 6P6C + F-connector 40258-00W — — —
MIDWAY TELEPHONE & VIDEO WALLPLATES (NYLON)
[F] Wall Jack, 6P4C 40539-PMW 40539-PMT 40539-PMI 40539-PMB
[G] Wall Jack, 6P4C + F-connector 40539-CMW 40539-CMT 40539-CMI 40539-CMB
[H] Wall Jack, F-connector 40539-0MW 40539-0MT 40539-0MI 40539-0MB
TELEPHONE & VIDEO WALLPLATES
• Provide quick at-the-wall connections for RJ-11 telephone
and F-connection video applications
• High-quality ABS plastic or nylon, which provides superior resistance
to impacts, chemicals, and solvents as compared to other plastics
• Midway wallplates hide irregular drywall cuts or flaws around outlets
• cULus Listed, fire-retardant material rated UL 94V-0
Midway WallplateStandard Wallplate
GH
F
A59 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
wallplates & housings
COPPER
WALLPLATES & HOUSINGS |
Decora® Telephone & Video Wallplates & Inserts
J
DECORA STANDARD TELEPHONE & VIDEO WALLPLATE ASSEMBLIES (WALLPLATE INCLUDED)
DESCRIPTION WHITE LT. ALMOND IVORY GREY BLACK BROWN
[A] Wall Jack, 6P4C 40149-00W 40149-00T 40149-00I — — —
[B] Wall Jack, 6P4C + 6P4C 40144-00W 40144-00T 40144-00I — — —
[C] Wall Jack, 6P4C + F-connector 40159-00W 40159-00T 40159-00I — — —
[D] Wall Jack, F-connector 40981-0WD 40981-0TD 40981-0ID — — —
[E] Wall Jack, F-connector + F-connector 40982-0WD 40982-0TD — — — —
DECORA TELEPHONE & VIDEO INSERTS (WALLPLATE NOT INCLUDED)
[F] Wall Jack, 6P4C 40649-00W 40649-00T 40649-00I 40649-0GY 40649-00E 40649-000
[G] Wall Jack, 6P4C + 6P4C 40644-00W 40644-00T 40644-00I — — —
[H] Wall Jack, 6P4C + F-connector 40659-00W 40659-00T 40659-00I — 40659-00E —
[I] Wall Jack, F-connector 40681-00W 40681-00T 40681-00I 40681-0GY 40681-00B
[J] Wall Jack, F-connector + F-connector 40682-00W — 40682-00I — — —
DECORA TELEPHONE & VIDEO INSERT KITS (WALLPLATE NOT INCLUDED)
Wall Jack, 6P6C
(QuickPort insert with snap-in jack) 41638-00W 41638-00T 41638-00I — — —
Wall Jack, 6P6C + F-connector
(QuickPort insert with snap-in jack
and snap-in F-connector )
41658-00W — 41658-00I — — —
DECORA TELEPHONE & VIDEO WALLPLATES
• 6P4C models feature lead-frame design for improved reliability and simple installation
• Decora inserts are compatible with Decora wallplates and Decora Plus screwless wallplates
• Decora wallplate assemblies include a Decora insert and matching Decora wallplate
• Decora Kits include a 1- or 2-port QuickPort® Decora insert and snap-in USOC
or F-type QuickPort connectors
• Inserts, assemblies, and kits are cULus Listed and rated UL 94V-0 Inserts fit Decora
Wallplates found
on page A63.
ABCD
IF G H
E
White BrownLight
Almond
Grey Black
Ivory
A60
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
wallplates & housings
COPPER
WALLPLATES & HOUSINGS |
Round Telephone Inserts & Surface-Mount Boxes
ROUND TELEPHONE INSERTS
DESCRIPTION WHITE LT. ALMOND IVORY
[A] Round Insert, 6P4C, 110 termination — — 41054-IDD
[B] Round Insert, 6P4C, screw terminal — — 40201-00I
SURFACE-MOUNT TELEPHONE BOXES
Surface-Mount Box, 6P4C, screw terminal 4625A-24W — 4625A-24I
Surface-Mount Box, 6P6C, screw terminal 4625A-26W — 4625A-26I
[C] Surface-Mount Box, 8P8C, screw terminal 40278-00W — 40278-00I
Surface-Mount Box, 8P8C w/ shorting bar, screw terminal, RJ-31X — 40278-SBT 40278-SBI
CBA
ROUND TELEPHONE INSERTS & SURFACE-MOUNT BOXES
• Round inserts available with screw terminal or 110 terminations
• See page A64 for wallplates with round openings
• Surface-mount boxes feature 4-, 6-, and 8-conductor screw terminal connections
• Shorting bar option for use with monitored home security systems
0.82"
2.26"
2.02"
4625A-xxx, 40278-00x
0.96"
2.02"
2.02"
40278-5Bx
A61 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
wallplates & housings
COPPER
WALL-PHONE JACK WALLPLATES - 110-STYLE
DESCRIPTION WHITE LT. ALMOND IVORY STAINLESS
[A] Wall-Phone Jack, 6P4C quick-connect, plastic w/ metal base 40253-00W 40253-00T 40253-00I —
[B] Wall-Phone Jack, 6P4C quick-connect, stainless w/ metal base — — — 40223-00S
WALL-PHONE JACK WALLPLATES - SCREW TERMINAL
[C] Wall-Phone Jack, 6P4C screw terminal, plastic w/ metal base 40257-00W — 40257-00I —
[D] Wall-Phone Jack, 6P4C screw terminal, plastic w/ plastic base 40214-00W 40214-00T 40214-00I —
Wall-Phone Jack, 6P6C screw terminal, stainless w/ metal base — — — 40226-00S
White Light
Almond
Ivory
WALLPLATES & HOUSINGS | Telephone Wall-Phone Jacks
TELEPHONE WALL-PHONE JACKS
• Wall-phone jacks available in 4- or 6-conductor models
• Screw terminal or quick-connect termination options
• Quick-connect products include plastic punchdown tool
AB CD
Quick-connect
Wall-Phone Jack
Screw Terminal
Wall-Phone Jack
3.00"
4.72"
3.00"
4.50"
.73"
.09"
Side View
Wall-Phone Jack
A62
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
wallplates & housings
COPPER
WALLPLATES & HOUSINGS | Decora® Wallplates
ABC
EFG
D
H
Standard Decora and Decora Plus wallplates accept a variety of inserts for voice, data, and video applications.
The most common wallplates are shown here in a variety of materials and dimensions. Refer to page X15 for more
detailed material properties. Decora Plus wallplates utilize a screwless design. Numerous additional configurations
are available; call 800.722.2082 or visit leviton.com for more information.
DECORA SINGLE-GANG WALLPLATES
DESCRIPTION WHITE LT. ALMOND IVORY GREY BLACK BROWN STAINLESS
[A] Decora, standard size, urea 80401-00W 80401-00T 80401-00I 80401-0GY 80401-00E 80401-000 —
Decora, standard size, nylon 80401-0NW 80401-0NT 80401-0NI 80401-NGY 80401-0NE 80401-00N —
[B] Decora, standard size, stainless — — — — — — 84401-040
[C] Decora Plus, standard size,
polycarbonate 80301-0SW 80301-0NT 80301-0SI 80301-SGY 80301-0SE 80301-00S —
[D] Decora, midway, urea 80601-00W 80601-00T 80601-00I 80601-0GY 80601-00E 80601-000 —
Decora, midway, nylon PJ26-00W PJ26-00T PJ26-00I PJ26-0GY PJ26-00E PJ26-000 —
DECORA DUAL-GANG WALLPLATES
[E] Decora, standard size, urea 80409-00W 80409-00T 80409-00I 80409-0GY 80409-00E 80409-000 —
Decora, standard size, nylon 80409-0NW 80409-0NT 80409-0NI 80409-NGY 80409-0NE 80409-00N —
[F] Decora, standard size, stainless — — — — — — 84409-040
[G] Decora Plus, standard size,
polycarbonate 80309-0SW 80309-0ST 80309-0SI 80309-SGY 80309-0SE 80309-00S —
[H] Decora, midway, urea 80609-00W 80309-00T 80609-00I 80609-0GY 80609-00E 80609-000 —
Decora, midway, nylon PJ262-00W PJ262-00T PJ262-00I PJ262-0GY PJ262-00E PJ262-000 —
A63 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
wallplates & housings
COPPER
WALLPLATES & HOUSINGS | Duplex, Round Opening & Blank Wallplates
White BrownLight
Almond
Ivory Grey Black
EA BCD
FGH
Standard 106-style duplex receptacle wallplates accept QuickPort® footprint inserts with either two or four openings
(see page A51). Round opening wallplates accept 110-style or screw terminal inserts (see page A61). Stainless
wallplates are constructed of type 302 stainless steel.
DUPLEX SINGLE-GANG WALLPLATES
DESCRIPTION WHITE LT. ALMOND IVORY GREY BLACK BROWN STAINLESS
[A] Duplex, standard size, urea 88003-000 78003-000 86003-000 87003-000 — 85003-000 —
Duplex, standard size, nylon 80703-00W 80703-00T 80703-00I 80703-0GY 80703-00E 80703-000 —
[B] Duplex, standard size, stainless — — ————84003-040
[C] Duplex, midway, urea 80503-00W 80503-00T 80503-00I 80503-0GY 80503-00E 80503-000 —
Duplex, midway, nylon 00PJ8-00W 00PJ8-00T 00PJ8-00I 00PJ8-0GY 00PJ8-00E 00PJ8-000 —
DUPLEX DUAL-GANG WALLPLATES
[D] Duplex, standard size, urea 88016-000 78016-000 86016-000 87016-000 — 85016-000 —
Duplex, standard size, nylon 80716-00W 80716-00T 80716-00I 80716-0GY 80716-00E 80716-000 —
[E] Duplex, standard size, stainless — —————84016-040
[F] Duplex, midway, urea 80516-00W 80516-00T 80516-00I 80516-0GY 80516-00E 80516-000 —
Duplex, midway, nylon 0PJ82-00W 0PJ82-00T 0PJ82-00I 0PJ82-0GY 0PJ82-00E 0PJ82-000 —
ROUND OPENING SINGLE-GANG WALLPLATES
[G] Round Opening,
standard size, urea 88004-000 78804-000 86004-000 — — 85004-000 —
Round Opening,
standard size, nylon 80704-00W 80704-00T 80704-00I 80704-0GY 80704-00E 80704-000 —
[H] Round Opening,
standard size, stainless ——————84004-040
[I] Round Opening, midway, urea 80504-00W 80504-00T 80504-00I — — 80504-000 —
Round Opening, midway, nylon 00PJ7-00W 00PJ7-00T 00PJ7-00I ————
SINGLE- AND DUAL-GANG BLANK WALLPLATES
[J] Single-Gang Blank Wallplate 88014-000 78014-000 86014-000 87014-000 — 85014-000 84014-040
[K] Dual-Gang Blank Wallplate 88025-000 78025-000 86025-000 87025-000 — 85025-000 84025-040
I J K
A64
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
wallplates & housings
COPPER
COPPE
R
FEATURED
PRODUCTS
Palm Termination
Tool A66
Wire-Punchdown
Termination Tool A66
copper tools & labeling
Leviton has everything you need to terminate and test our copper solutions.
The ergonomic Palm Termination Tool, designed by and for installers, offers
comfort-grip or rack-mounted positioning for termination, a sturdy connector
holder, and a wire-supporting retainer. The Wire-Punchdown Termination Tool
enables one-step punchdown of 110-style or 66 connecting block IDCs with
a single push on the handle. Specialized termination tools, test equipment,
crimping tools, and other accessories complete the collection.
COPPER TOOLS & LABELING | Tools
TERMINATION TOOLS & BLADES
DESCRIPTION PART NO.
[A] Palm Termination Tool 47615-PTT
[B] Wire-Punchdown/Termination Tool (blades sold separately) 49553-814
[C] 110 IDC Blade 49553-110
[D] 66 IDC Blade 49553-066
MULTI-PAIR TERMINATION TOOLS & ACCESSORIES
[E] Mass-Termination Multi-Pair Tool Handle with CAT 6, 4-pair head 49553-TTH
Mass-Termination Replacement Head, CAT 6, 4-pair 49553-64H
Mass-Termination Replacement Head, CAT 5e, 5-pair 49553-55H
CUTTING TOOLS
[F] Klein Tools Electrician's Scissors 49886-SIS
[G] Klein Tools Flush Cutter (must be ordered in increments of 5) 49886-FCS
FE
PALM TERMINATION TOOL
• Overmolded ergonomic soft grip
• Easy-to-see wiring labels
• Connector holders provide stability for punchdown
• Incorporated retainer supports cable during termination
• Integrated holes allow rack-mounting of the Palm Tool
for patch panel terminations
• Compatible with all Leviton CAT 6A/6/5e
and A/V connectors
MULTI-PAIR TERMINATION TOOL
• Designed for 110-style wiring blocks
• High-impact, spring-loaded handle for one-punch
termination of multiple pairs
• "Blade-in" and “blade-out” options
• Includes 4-pair, CAT 6 head
• CAT 5e and 6 heads available individually
WIRE-PUNCHDOWN / TERMINATION TOOL
• Punches and trims each wire with just a single
push of the handle
• Adjustable impact setting for minimal physical eort
• Spare blade storage in handle chamber
• Available in 110 IDC and 66 IDC
• Terminate 22-, 24-, or 26-gauge wire
CUTTING TOOLS
• Klein Tools® Electrician’s Scissors are excellent
for cutting and stripping copper cable as well as
trimming center splines and rip cords
• Klein Tools Flush Cutter neatly trims individual cable
wires flush to connector body to prevent shorts in metal
housings (recommended for shielded connectors)
A G
B
C, D
A66
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
tools & labeling
COPPER
TONE TEST SET, INDUCTIVE SPEAKER PROBE & KITS
DESCRIPTION PART NO.
[A] Tone Test Set (includes 9-volt battery) 49560-TTS
[B] Inductive Speaker Probe (includes 9-volt battery, one duckbill tip, and one needlepoint tip) 49561-SSP
[C] Kit containing one Tone Test Set with Belt Holster, and one Inductive Speaker Probe with Belt Holster 49562-TSK
MODULAR PLUG BREAKOUT ADAPTER
[D] Modular Plug Breakout Adapter 40070-MDP
COAXIAL CONNECTOR TOOLS
Crimping Tool for Coaxial Connectors 40988-000
[E] Master Compression Tool 40989-CPT
D E
TONE TEST SET
• Low-voltage tester for continuity, shorts, and opens
• Talk battery for a communications line on a vacant pair
• Identifies tip and ring polarity, and line condition for clear
line with dial tone, busy line, and ringing line
• Generates continuous or warble tone to trace pairs
and locate broken pairs/cables in walls – use with
Inductive Speaker Probe (below)
INDUCTIVE SPEAKER PROBE
• Detects audible frequency tones for accurate
tracing and identification of wires, cables,
and metallic circuits
MODULAR PLUG BREAKOUT ADAPTER
• For testing any 6- or 8-position modular jacks
• Works with the Tone Test Set
COAXIAL CONNECTOR TOOLS
• Crimp coax onto RG-59 or RG-6 cables
• Rugged metal construction with cushioned handles
MASTER COMPRESSION TOOL
• Terminates all Leviton coaxial compression connectors,
including RCA and F-connectors
• Radial-style crimp compresses uniformly around
connector body
COPPER TOOLS & LABELING | Tools
BA C
A67 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
tools & labeling
COPPER
COPPER TOOLS & LABELING | Labeling Solutions
WORK-AREA LABELING SOLUTIONS
DESCRIPTION PART NO.
[A] QuickPort® Shutter Kit (50 shutters) 51084-ICN
White Label Kit 51084-XLB
[B] Color Label Kit includes grey, orange, red, yellow, green, blue, purple, and brown (2 sheets of each color) 51084-CLB
[C] Labels and Windows for Wallplates & Housings on page A59 41080-IDW
Labels and Windows for Stainless-Steel and Angled Wallplates on pages A49 and A50 43080-IDW
Pre-printed Port Labels, black ink, 10 sheets per package 41080-LEB
PATCH PANEL LABELING SOLUTIONS
[D] Adhesive Holder and Labels Kit for QuickPort Panels (supports 24 ports) 49257-QHD
[E] Adhesive Holder and Labels Kit for 110-Style Panels (supports 24 ports) 49257-I24
[F] Designation Kit Replacement for 110-Style Panels (supports 24 ports) 69585-IDL
Use the Leviton Palm Termination Tool (page A66) to quickly and easily
punchdown connectors at the job site. The Palm Tool was designed
with contractor input and offers an ergonomic comfort grip, increased
connector stability, and integrated holes that allow rack mounting for
QuickPort panel terminations. The Palm Tool is compatible with all
CAT 6A/6/5e and QuickPort A/V connectors.
110-STYLE LABELING SOLUTIONS
DESCRIPTION PART NO.
CAT 6 Label Kit, 6/kit 41LBL-60W
CAT 5e Label Kit, 6/kit 41LBL-00W
Label Holder, 6/kit 41100-HLD
EFD
CAT 6 Label HolderCAT 5e
BA C
SPOTLIGHT Leviton Palm Termination Tool
A68
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
tools & labeling
COPPER
FIBER SOLUTIONS
SECTION
B
SECTION BCONTENTS
FLUSH-MOUNT
ENCLOSURES
& PANELS
B39 Introduction
B40 Enclosures & Panels
EQUIPMENT-
SPECIFIC
SOLUTIONS
B42 Vertical Patching Brackets
& Blade Replicators
B43 Replicator® Enclosures
B44 Mainframe
PRE-TERMINATED
CABLE ASSEMBLIES
& PATCH CORDS
B45 Introduction
B46 Make-to-Order Overview
B47 Opt-X Unity 40/100G MTP® Trunk Cables
B49 Standard Trunk Cables
B50 Secure Keyed LC Trunk Cables
B51 Opt-X Unity 40/100G MTP Harnesses
B52 Standard Harnesses
B53 Secure Keyed LC Harnesses
B54 Opt-X Unity 40/100G Array Cords
B55 Premium Patch Cords & Pigtails
B56 Economy Patch Cords & Pigtails
B58 Secure Keyed LC Patch Cords & Pigtails
CONNECTORS &
HOUSINGS
B59 Introduction
B60 FastCAM® Connectors
B61 Fast-Cure® Connectors
B62 Secure Keyed LC Connectors
& Accessories
B63 Fiber Optic Fan-Out Kits
B64 QuickPort® Adapters
B65 Multimedia Outlet System (MOS)
TOOLS &
CONSUMABLES
B67 Introduction
B69 Fiber Optic Tool Kits
B71 Fiber Optic Tools
B72 Consumable Products & Kits
INTRODUCTION B3 Common Configurations
B5 Pre-Terminated Solutions
B6 Opt-X® Unity 40/100G
HDF3168
DISTRIBUTION
SYSTEM
B7 Introduction
B9 Frame, Patch & Splice Decks
B10 Adapter Plates & Cassettes
OPT-X HD B11 Introduction
B13 Enclosures & Trays
B14 Adapter Plates & Cassettes
OPT-X B15 Introduction
B16 Enclosures
B21 Adapter Plates
B23 Cassettes
B25 Splice Trays & Splice Holders
B26 Accessories
e2XHD B27 Introduction
B29 Panels, Cable Managers,
Covers & Tools
B30 Cassettes
LIGHTSPACE® B31 Introduction
B32 Enclosures
B35 Adapter Plates
B37 Splice Trays & Holders
B38 Splice Sleeves &
Enclosure Accessories
FIBER SOLUTIONS | Common Configurations
TYPE ENCLOSURE SYSTEM ADAPTER PLATES CONNECTORS
OM3
OM4
50/125 μm
Laser-
Optimized
Multimode
Systems
Opt-X Ultra® HD - See Page B13
Opt-X HDX Adapter Plates - See Page B14 Field-Installable Connectors - See Page B60
Opt-X® 1000i HD - See Page B13
OM1
OM2
62.5/125 μm
or
50/125 μm
Multimode
Systems
Opt-X 1000i - See Page B17
Opt-X Adapter Plates - See Page B21 Field-Installable Connectors - See Page B60
Opt-X 500i - See Page B18
OS1
OS2
Single-Mode
System
Opt-X Ultra - See Page B16
Opt-X Adapter Plates - See Page B21 Field-Installable Connectors - See Page B60
Opt-X 1000i - See Page B17
B3 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
fiber solutions
FIBER
FIBER SOLUTIONS | Common Configurations
CABLE ASSEMBLIES SPECIFICATION CHART APPLICATIONS
Fiber Patch Cords - See Page B55
SPECIFICATION
OM3
SYSTEM
OM4
SYSTEM
OM4+
SYSTEM
Data center infrastructure
High-bandwidth enterprise,
building automation, and security
Medium-to-large
enterprise networks
High-performance computer
clusters
Migration path
to Opt-X® Unity 40/100G
VCSEL-based propagation
850
NM
1300
NM
850
NM
1300
NM
850
NM
1300
NM
Max. Attenuation
(dB/km) 3.0 1.0 3.0 1.0 3.0 1.0
Overfill Launch Min.
Bandwidth (MHz•km) 1500h 5002N/A 5002N/A 5003
Eective Modal
Bandwidth (EMB)
(MHz•km)
20001N/A 47001N/A 4900 N/A
1G Transmission
Distance (m) 1000 600 1040 600 1210 600
10G Transmission
Distance (m)
300 300 550 300 600 3005
40/100G Transmission
Distance (m) 100 N/A 150 N/A 1506N/A
1 The eective modal bandwidth is determined based on an overfill launch (OFL) per ANSI/TIA-455-204,
except on LOMM fiber types.
2 10GbE transmission at 1,300 nm only applies to 10GBASE-LX4 (CWDM).
Fiber Patch Cords - See Page B56
SPECIFICATION
OM1
SYSTEM
OM2
SYSTEM
Building backbones
and zone cabling
Legacy cabling
(62.5/125 μm fiber/OM1)
Low-bandwidth enterprise,
building automation, and security
Small-to-medium
enterprise networks
LED-based propagation
(62.5/125 μm fiber/OM1)
LED- or laser-based propagation
(50/125 μm fiber/OM2)
850
NM
1300
NM
850
NM
1300
NM
Max. Attenuation (dB/km) 3.5 1.0 3.0 1.0
Overfill Launch Min. Bandwidth (MHz•km) 200 500 950 500
1G Transmission Distance (m) 300 600 750 600
10G Transmission Distance (m)
36 300 150 300
Fiber Patch Cords - See Pages B55 and B57
SPECIFICATION
OS1
SYSTEM
OS2
SYSTEM
Campus and building backbones
Entrance facilities
and equipment rooms
Long distances
Carrier equipment
1310
NM
1550
NM
1310
NM
1550
NM
Max. Attenuation (dB/km) 0.5 0.4 0.4 0.3
1G Transmission Distance (m) 5,000 N/A 5,000 N/A
10G Transmission Distance (m)
10,000 N/A 10,000 N/A
B4
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
fiber solutions
FIBER
FIBER SOLUTIONS | Pre-Terminated Solutions
PRE-TERMINATED SOLUTIONS
Leviton recommends using pre-terminated trunks and harnesses whenever possible. With 100% factory testing and
no need for field terminations or splices, installation time is reduced by up to 70%. Plug-n-play pre-terminated MTP®
cassettes feature a space-saving design with a notched back for a smaller footprint and excellent radius control.
All Leviton pre-terminated solutions are made to your specifications: fiber and cable type, fiber count, connector
type, breakout leg types, length, and more. More information on page B45.
TRUNK CABLES (see pages B47-B50)
• MTP to MTP, including 12- and 24-fiber MTP connectors
• Discrete to discrete (LC, SC, ST, APC, and MU)
• MTP to discrete*
•
Single-mode, multimode, and laser-optimized multimode types available
•
Secure Keyed LC trunks lock into any industry-compliant adapter or interface
HARNESSES (see pages B51-B53)
• MTP to MTP connectors
• MTP to discrete connectors (LC, SC, ST, and MU)*
• Single-mode, multimode, and laser-optimized multimode types available
•
Secure Keyed LC harnesses lock into any industry-compliant adapter
or interface
MTP CASSETTES (see pages B23-B24)
• 12- or 24-fiber MTP connectors on the back
•
MTP connectors or discrete connectors on the front, including LC, SC, and MU*
• Single-mode, multimode, and laser-optimized multimode types available
* = LC/APC to SC/APC available for OS2.
CONNECTOR
MATED
PAIRS
MULTIMODE SINGLE-MODE
DUPLEX
TYPICAL
IL
DUPLEX
MAX
IL
12-FIBER
STANDARD
TYPICAL IL
12-FIBER
STANDARD
MAX IL
12- & 24-
FIBER
PREMIUM
MAX IL
STANDARD
TYPICAL IL
STANDARD
MAX IL
PREMIUM
MAX IL
LC 0.15 0.25 — — — 0.25 0.35 —
SC 0.20 0.25 — — — 0.25 0.35 —
MU 0.15 0.25 — — — 0.25 0.35 —
MTP — — 0.35 0.50 0.35 — 0.75 0.35
MTP
CASSETTES
&
HARNESSES
MULTIMODE SINGLE-MODE
12-FIBER
PREMIUM
MAX IL
24-FIBER
PREMIUM
MAX IL
12-FIBER
STANDARD
MAX IL
12-FIBER
PREMIUM
MAX IL
LC 0.50 0.50 1.00 0.60
SC 0.50 — 1.00 0.60
MU 0.50 — 1.00 0.60
PRE-TERMINATED FIBER CABLING PERFORMANCE
In order to achieve proper polarity when using Method B with two cassette configurations,
Core and Edge cassettes must be used in pairs. This will simplify the design requirements
for trunks and patch cords. For consistency, Core cassettes are typically placed at the main
connection point, at or close to the main switching equipment. Edge cassettes are placed
at the end connection point, near access layer equipment. For easy identification, Core
cassette casing and pins are black, while Edge cassette casing and pins are white.
Opt-X HDX Edge (White)Opt-X® HDX Core (Black)
e2XHD Edge (White)e2XHD Core (Black)
Opt-X Edge (White)Opt-X Core (Black)
SPOTLIGHT Core & Edge Cassettes
B5 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
fiber solutions
FIBER
PREPARE FOR 40/100G WITH THE OPT-X UNITY MULTIMODE SYSTEM
Leviton pre-terminated Opt-X Unity 40/100G laser-optimized multimode (LOMM) systems oer an ideal migration
path to 40/100G speeds. They also meet the IEEE 802.3ba standard, which responds to the needs of data centers
and enterprise networks that require speeds beyond 10 Gbps. The Opt-X Unity system features pre-terminated
trunks, harnesses, array cords, and MTP® cassettes to help you future-proof your networks. See pages B47, B48,
B51, and B54 for detailed product information.
• System of trunks, harnesses, and cassettes is 40/100G ready
• Industry-leading 24-fiber MTP system
• System uses best-in-class MTP premium multi-fiber connectors
• Available in laser-optimized multimode (OM3/OM4)
• Third-party verification of 40/100G channel performance
OPT-X UNITY 40/100G SYSTEM
• 24-fiber MTP trunks
• 24-fiber MTP harnesses
• 24-fiber MTP array patch cords
• 24-fiber MTP cassettes
• 100G migration is available in Opt-X HD, Opt-X, and e2XHD footprints
MIGRATION SOLUTIONS TO OPT-X UNITY
40/100G SYSTEM FROM EXISTING 10G NETWORKS
• Premium 12-fiber MTP trunks
• Premium 12-fiber MTP harnesses
• 24-fiber and premium 12-fiber array patch cords
• Premium 12-fiber MTP cassettes
FIBER SOLUTIONS | Pre-Terminated Solutions > Opt-X® Unity 40/100G
40/100G MULTIMODE CHANNEL
REQUIREMENTS (IEEE802.3BA)
OPTICAL
FIBER
TYPE
MAX.
CHANNEL
INSERTION
LOSS
MAX.
CONNECTOR
LOSS
MAX
DISTANCE
OM3 1.9 dB 1.5 dB 100
meters
OM4 1.5 dB 1.0 dB 150
meters
Contact dcteam@leviton.com for help
designing your 10/40/100G migration plan.
Channel tested by
Intertek (ETL)
®
COLOR-CODED BOOTS ON MTP
Red
24-Fiber
Aqua
12-Fiber
Gray
8-Fiber
B6
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
fiber solutions
FIBER
FIBE
R
FEATURED
PRODUCTS
Frame, Patch
& Splice Decks B9
Adapter Plates
& Cassettes B10
HDF3168 distribution system
The Leviton high-density HDF3168 Distribution System can handle up to 3168
fibers in just one tile of floor space. Ideal for service providers, central office
facilities, large enterprise and cloud data centers, the HDF3168 Distribution
System will reduce your patching footprint, free up valuable space, and save
you money. Separated trunk, cable, and patch cord management improves
accessibility and enables easy moves, adds, and changes. In addition, the system
is fully scalable and modular, supporting consolidation and growth.
HDF3168 DISTRIBUTION SYSTEM | Introduction
BUILT-IN CABLE MANAGEMENT & ROUTING
The frame keeps pathways clean and organized, using integrated cable
management for minimum bend radius, better slack storage, and protection
within the frame. Patch decks contain patch cord and MTP trunk routing for
individual trays. And enhanced labeling improves deck and fiber identification
to simplify moves, adds, or changes.
SUPERIOR SCALABILITY
HDF3168 frames can be ganged together to handle future growth
with easy pass-through cross-frame routing kits. And with 24-fiber
MTP connectivity, they are ideal for migration from 10G to 40G to
100G and beyond.
ADDITIONAL SECURITY
The HDF frame includes rear doors that lock to protect and
conceal trunk cabling. Locking front doors (sold separately)
are transparent to allow visibility.
EASY ACCESSIBILITY
The frame’s open design greatly reduces time and labor for
maintenance, as it allows unobstructed access to patch cord
connections on the cassettes and adapter plates. And the one-tile
footprint makes it easier to access the space beneath a raised floor.
INDUSTRY-LEADING DENSITY
The HDF system accomplishes such high
density through its unique patch deck
design. Each frame holds up to 22 patch
decks, each configured with your choice
of fiber cassettes, adapter plates, or
splice trays.
HDF3168 CAPACITY CHART
CONNECTIVITY MAX. FIBER STRANDS
LC 3,168
SC 1,584
12-Fiber MTP®7,776
24-Fiber MTP 15,552
Chart based on use of 48-fiber trunks
B8
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
HDF3168
distribution system
FIBER
FIBER DISTRIBUTION FRAME
• Integrated cable management and routing solutions
for minimum bend radius, better slack storage,
and protection
• Holds up to 22 decks, each configured with cassettes,
adapter plates, or splice trays
• Lockable rear doors included to protect and conceal
trunk cabling
• Optional front doors (sold separately) are transparent
and lockable for additional security
• Occupies only one 2-foot square tile
• Seismic rated to GR-63-CORE, Zone 4, UL 2046 Listed
PATCH DECK
• 2RU height for up to 144 fibers (using LC) capacity
• Holds 6 independent sliding trays and accepts
up to 12 single-width or 6 double-width MTP
cassettes or adapter plates
• Magnifying port identification label holders
for better visibility
• Integrated minimum bend radius protection
SPLICE DECK
• Modular 3.5-inch-high deck accepts up to three
independent splice trays
• Sliding trays are removable for ease of splicing
• Heat-shrink fusion splicing of individual 250 µm or
900 µm tight-buffer fibers for up to 144 fibers per deck
• Mass ribbon fusion splicing available as custom order
HDX ADAPTER PLATES
• Connect to field-terminated backbone
cabling or pre-terminated trunks
• Easy, one-hand installation
and removal
• Offered in OM1/OM2, OM3/OM4, and OS2 fiber types
• LC, SC, and MTP styles in 6, 12, or up to 72/144-fiber
configurations are available
•
Visible sequential numbering to identify ports (for Tx and Rv)
HDX MTP CASSETTES
• 12- or 24-fiber MTP configurations
• Select from LC or MTP connectors for 10G, 40G,
or 100G applications
• Configure up to 48 fibers for 24 channels (10G)
and 6 channels (40G)
• Easy to migrate from 10G to 40/100G when used
with Opt-X® Unity trunks, harnesses, or patch cords
• Pre-terminated fiber eliminates the need for
complicated field terminations and splices
• A variety of fiber types are available including
single-mode, multimode, and laser-optimized multimode
• Easy, one-hand installation and removal
24-FIBER HIGH-DENSITY SPLICE TRAY
• Use with HDF3168 Splice Decks
• Protect and manage heat-shrink spliced fibers
• Heat-shrink splice sleeves included
HDF3168 DISTRIBUTION SYSTEM | Frame Patch & Splice Decks
B
A
C
1x12 MTP® Fiber to 12-Fiber LC Cassette
EH
D
FG
New New New New
New New
New
New
B9 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
HDF3168
distribution system
FIBER
HDF3168 DISTRIBUTION SYSTEM | Cassettes & Adapter Plates
HDF3168 FIBER OPTIC DISTRIBUTION SYSTEM
DESCRIPTION PART NO.
[A] Fiber Distribution Frame, 7' H x 2' W x 2' D F3168-22F
[B] Patch Deck, 2RU, empty (includes VELCRO® Brand ties and cable clamp kit) F3168-DCK
[C] Splice Deck, 2RU, empty (includes VELCRO Brand ties, mesh sleeve, and cable clamp kit) F3168-SPD
[D] Cross-Frame Routing Kit F3168-CFR
[E] Front Doors Kit F3168-FDR
Cable Clamp Kit F3168-CCK
2RU Blank Panel F3168-BLK
HDX ADAPTER PLATES & SPLICE TRAY
Adapter Plate, OM1 & OM2, Quad LC (Beige), 12 fibers, phosphor bronze sleeve 5FUHD-2IL
[F] Adapter Plate, OM3 & OM4, Quad LC (Aqua), 12 fibers, zirconia ceramic sleeve 5FUHD-2QL
Adapter Plate, OS2, Quad LC (Blue), 12 fibers, zirconia ceramic sleeve 5FUHD-2LL
Adapter Plate, OM1 & OM2, Duplex SC (Beige), 6 fibers, phosphor bronze sleeve 5FUHD-6IC
Adapter Plate, OM3 & OM4, Duplex SC (Aqua), 6 fibers, zirconia ceramic sleeve 5FUHD-6QC
Adapter Plate, OS2, Duplex SC (Blue), 6 fibers, zirconia ceramic sleeve 5FUHD-6LC
Adapter Plate, 3 Duplex MTP Adapters (Black), key up/key up 5FUHD-6MB
[G] Adapter Plate, 3 Duplex MTP Adapters (Black), key up/key down 5FUHD-6MP
Adapter Plate, blank (Black) 5FUHD-BLK
[H] 24-fiber Heat Shrink Style Molded Splice Tray (includes 60 mm splice sleeves) T5PLS-24F
Make to order! HDF3168 FRAME OPTIONS
# OF
PATCH DECKS
# OF CASSETTES OR
ADAPTER PLATES PER
PATCH DECK
FIBER
COUNT FIBER TYPE
CASSETTE/PLATE
CONNECTOR TYPE
(FRONT)
CASSETTE/PLATE
CONNECTOR TYPE (REAR)
CASSETTE
POLARITY FRONT
DOORS KIT
• 1-22 • 1-12 • 12
• 24
• 48
• OM2
• OM3
• OM4
• OS2
• LC
• SC
• MTP
• LC (Plate)
• SC (Plate)
• MTP (Plate)
• 12-Fiber MTP
• 24-Fiber MTP
• Method A
• Method B (Core)
• Method B (Edge)
• Method C
• Yes
• No
Make to order! HDF3168 PATCH DECK OPTIONS
# OF CASSETTES OR ADAPTER
PLATES PER DECK
CASSETTE
FIBER COUNT
FIBER TYPE CASSETTE/PLATE
CONNECTOR TYPE (FRONT)
CASSETTE/PLATE
CONNECTOR TYPE (REAR) CASSETTE POLARITY
• 1-12 • 12
• 24
• 48
• OM2
• OM3
• OM4
• OS2
• LC
• SC
• MTP
• LC (Plate)
• SC (Plate)
• MTP (Plate)
• 12-Fiber MTP
• 24-Fiber MTP
• Method A
• Method B, Core
• Method B, Edge
• Method C
Make to order! HDX MTP CASSETTE OPTIONS
FIBER TYPE FIBER COUNT CONNECTOR TYPE (FRONT) MTP TYPE (REAR) POLARITY
• OM2
• OM3
• OM4
• OS2
• 12
• 24
• 48
• LC
• MTP
• M1 (12F)
• M2 (24F)
• Method A
• Method B, Core
• Method B, Edge
• Method C
For Method B polarity, you must order one each of the Core and Edge cassettes.
For assistance customizing your cassettes, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
B10
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
HDF3168
distribution system
FIBER
FIBE
R
FEATURED
PRODUCTS
Enclosures &
Trays B13
Adapter Plates &
Cassettes B14
Opt-X® HD enclosure system
Data centers and telecommunications rooms are rapidly outgrowing their
footprints to meet increasing network demands. The new Leviton Opt-X HD
Enclosure System features compact, high-density cassettes and adapter plates
with LC or MTP® connectors that fit into high-density enclosures to create a
scalable platform for enterprise and data center applications. This allows you to
maintain low costs while benefiting from higher density: 33% more density with
LC connectors or 50% with MTP connectors.
Opt-X HD
enclosure system
FIBER
OPT-X HD® ENCLOSURE SYSTEM | Introduction
Capacity of 1RU Opt-X Enclosure
with MTP-LC Cassette
Capacity of 1RU Opt-X HD Enclosure
with MTP-LC Cassette
A PART OF THE OPT-X FAMILY
Opt-X fiber enclosures, adapter plates, MTP® cassettes, and cable
assemblies oer flexible connection and storage options. Featuring
compact Opt-X HD cassettes and adapter plates that fit into
high-density enclosures, this innovative system creates a scalable
platform for comprehensive enterprise and data center applications.
33%
more fiber density
in the same space
with LC connectors
B12
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
Opt-X HD
enclosure system
FIBER
OPT-X® HD ENCLOSURE SYSTEM | Enclosures, Trays & Accessories
OPT-X HD ENCLOSURES & TRAYS
DESCRIPTION
MAXIMUM CAPACITY
PART NO.
FIBERS
(USING LC)
ADAPTER
PLATES
OR
MTP
CASSETTES
[A] Opt-X Ultra HD 1RU Enclosure, empty, with sliding tray 96 8 8 5R1UH-S08
Opt-X Ultra HD 2RU Enclosure, empty, with sliding tray 192 16 16 5R2UH-S16
Opt-X 1000i HD 1RU Enclosure, empty, with sliding tray 96 8 8 5R1UM-S08
[B] Opt-X 1000i HD 2RU Enclosure, empty, with sliding tray 192 16 16 5R2UM-S16
[C] Retrofit sliding tray, 1RU (for use with Opt-X Ultra or 1000i) — — — 5R1UR-TRY
Retrofit sliding tray, 2RU (for use with Opt-X Ultra or 1000i) — — — 5R2UR-TRY
ACCESSORIES
DESCRIPTION PART NO.
Universal Opt-X Clamp Kit, Single Cable Grommet (for enclosure mounting) 5RCMP-KIT
Universal Opt-X Clamp Kit, Multiple Cable Grommet (for enclosure mounting) 5RCMP-KT2
Universal Clamp Kit, Single and Multiple Cable Grommet (for rack mounting) 5RCMR-KIT
RECOMMENDED
APPLICATIONS:
Data Centers
Equipment Room
Entrance Facility
Telecommunications
Room
19" and 23" Racks
and Cabinets
OPT-X ULTRA® HD FIBER RACK-MOUNT ENCLOSURE
Not your typical black box, the stylish and innovative design features a sliding tray that can
be removed completely for easy field termination and accessibility. The enclosures utilize
new high-density adapter plates and MTP® cassettes. Innovative cable management options
allow for easy moves, adds, and changes. Additionally, the 17-inch depth is perfect for high-
density fiber applications such as MDA, HDA, and EDA spaces in data centers.
OPT-X 1000I HD FIBER RACK-MOUNT ENCLOSURE
The 1000i HD Enclosure has a simplified look and similar features to the Opt-X Ultra HD
Enclosure. This enclosure utilizes new high-density adapter plates and MTP cassettes,
and is ideal for data centers as well as smaller facilities, such as equipment rooms and
telecommunication rooms.
OPT-X HD ENCLOSURE ACCESSORIES
• Cable clamp kits minimize excessive pulling, bending, and crushing
• Supports easy cable identification and decreases the need for tie-wraps inside the enclosure
• Creates a transition point from jacketed cable to buered fiber or subunits
• Ideal for vertical strain relief and strain relief at the top or bottom of a rack/cabinet
BA C
New New New
B13 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
Opt-X HD
enclosure system
FIBER
OPT-X® HD ENCLOSURE SYSTEM | Adapter Plates & Cassettes
HDX ADAPTER PLATES
DESCRIPTION PART NO.
Adapter Plate, OM1 & OM2, Quad LC (Beige), 12 fibers, phosphor bronze sleeve 5FUHD-2IL
[A] Adapter Plate, OM3 & OM4, Quad LC (Aqua), 12 fibers, zirconia ceramic sleeve 5FUHD-2QL
Adapter Plate, OS2, Quad LC (Blue), 12 fibers, zirconia ceramic sleeve 5FUHD-2LL
Adapter Plate, OM1 & OM2, Duplex SC (Beige), 6 fibers, phosphor bronze sleeve 5FUHD-6IC
Adapter Plate, OM3 & OM4, Duplex SC (Aqua), 6 fibers, zirconia ceramic sleeve 5FUHD-6QC
Adapter Plate, OS2, Duplex SC (Blue), 6 fibers, zirconia ceramic sleeve 5FUHD-6LC
Adapter Plate, 3 Duplex MTP Adapters (Black), key up/key up 5FUHD-6MB
[B] Adapter Plate, 3 Duplex MTP Adapters (Black), key up/key down 5FUHD-6MP
Adapter Plate, blank (Black) 5FUHD-BLK
Make to order! HDX CASSETTE OPTIONS
FIBER TYPE FIBER COUNT CONNECTOR TYPE (FRONT) MTP TYPE (REAR) POLARITY
• OM2
• OM3
• OM4
• OS2
• 12
• 24
• 48
• LC
• MTP
• M1 (12F)
• M2 (24F)
• Method A
• Method B, Core
• Method B, Edge
• Method C
For MTP Method B polarity, you must order one each of the Core and Edge cassettes.
For assistance customizing your cassettes, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
1x12 MTP® Fiber to 12-Fiber LC Cassette
HDX ADAPTER PLATES
• Connect to field-terminated backbone cabling
or pre-terminated trunks
• Easy, one-hand installation and removal
• Oered in OM1/OM2, OM3/OM4, and OS2 fiber types
• LC, SC, and MTP styles in 6, 12, or up to 72/144
fiber configurations are available
• Visible sequential numbering to identify ports
(for Tx and Rv)
HDX MTP CASSETTES
• 12- or 24-fiber MTP configurations
• Select from LC or MTP connectors
for 10G, 40G, or 100G applications
• Configure up to 48 fibers for 24
channels (10G) and 6 channels (40G)
• Easy to migrate from 10G to 40/100G when used
with Opt-X Unity trunks, harnesses, or patch cords
• Pre-terminated fiber eliminates the need
for complicated field terminations and splices
• A variety of fiber types are available including
single-mode, multimode, and laser-optimized multimode
• Easy, one-hand installation and removal
BA
New New New
B14
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
FIBE
R
FEATURED
PRODUCTS
Enclosures B16
Adapter Plates B21
Cassettes B23
Opt-X® enclosure system
The Opt-X Enclosure System is a flexible solution designed for easy installation and
maintenance. Whether it's the Opt-X Ultra for data centers or 1000i and 500i for
medium and small enterprise applications, each comes packed with features for
better cable organization and maintainability. In addition, Opt-X adapter plates, MTP®
cassettes, and cable assemblies oer the flexible connection and storage options
to meet any project need.
OPT-X® ENCLOSURE SYSTEM | Rack-Mount Enclosures > Opt-X Ultra®
OPT-X ULTRA 1RU/2RU/4RU RACK-MOUNT ENCLOSURES
• Stylish and innovative design for today’s most advanced networks and settings
• Sliding tray removes completely from enclosure to facilitate field terminations and splicing
• Sliding tray with front and rear stop glides forward and backward, providing
accessibility to front and rear of bulkhead after installation
• 17" depth for high-density fiber termination and/or splicing
• Front saddles pivot for improved patch cord routing and organization
• Removable transparent hinged doors and slide-away covers allow easy access
during install and visibility of interior after install
• Patch cord bend radius guides minimize macro bending
• Stackable and adjustable fiber rings simplify cable management
• Constructed of durable polycarbonate plastic and black powder-coated 16-gauge steel
• Multiple mounting bracket positions for 19" or 23" rack and cabinet installation
(23" 1RU mounting bracket sold separately)
• Also accepts LightSpace® (LGX® footprint) adapter plate mounting cassettes by special order
•
1RU and 2RU accept the Retrofit Sliding Tray, sold separately, for higher density applications using Opt-X HDX MTP Cassettes
• 1RU and 2RU are "intelligent ready", accept Intact Fiber Upgrade Kits
OPT-X ULTRA RACK-MOUNT ENCLOSURES
DESCRIPTION
MAXIMUM CAPACITY
PART NO.
FIBERS
(USING LC)
ADAPTER
PLATES
AND
SPLICE
TRAYS*
OR
MTP®
CASSETTES
[A] Opt-X Ultra, 1RU, empty, sliding tray 72 3 3 3 5R1UH-S03
[B] Opt-X Ultra, 2RU, empty, sliding tray 144 6 6 6 5R2UH-S06
[C] Opt-X Ultra, 4RU, empty, sliding tray 288 12 12 12 5R4UH-S12
* = Maximum splice tray capacity is limited by height of selected splice tray. See page X13 for splice tray dimension and selection guide.
See pages B21-B24 for list of Opt-X adapter plates and cassettes.
Make to order! OPT-X ULTRA RACK-MOUNT ENCLOSURE OPTIONS
ENCLOSURE
STYLE
ADAPTER PLATES
OR MTP CASSETTE
SELECTION
ADAPTER
PLATE
QTY
FIBER
TYPE
ADAPTER TYPE
& PIGTAIL
SELECTION
SPLICE TRAY STYLE
NO. OF
SPLICE
TRAYS
SECURITY
OPTIONS
CABLE
CLAMP
KIT
MOUNTING
EAR
POSITION
• 1U Opt-X
• 2U Opt-X
• 4U Opt-X
• 6 fibers (SC, ST)
• 8 fibers (SC, ST)
• 12 fibers (LC, SC, ST)
• 16 fibers (LC only)
• 24 fibers (LC only)
• MTP Cassette -
12 fibers (LC, SC, ST)
• MTP Cassette -
24 fibers (LC only)
• 1-12 • OM1
• OM2
• OM3
• OM4
• OS2
• LC
• LC + pigtail
• SC
• SC/APC
• SC + pigtail
• SC/APC + pigtail
• ST
• ST + pigtail
• Heat shrink, foam holders,
up to 12 fibers (molded tray)
• Heat shrink, plastic holders,
up to 12 fibers (molded tray)
• Bare fusion, plastic holders,
up to 12 fibers (metal tray)
• Heat shrink, plastic holders,
up to 24 fibers (molded tray)
• 1-12
• None
• Locking
front door
• Locking
rear door
• Both doors
• None
• Ye s
• No
• 19"
• 23"
For assistance customizing your enclosures, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
RECOMMENDED
APPLICATIONS:
Data Centers
Equipment Room
Entrance Facility
Telecommunications
Room
19" and 23" Racks
and Cabinets
BA C
B16
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
Opt-X
enclosure system
FIBER
OPT-X® ENCLOSURE SYSTEM | Rack-Mount Enclosures > Opt-X 1000i
OPT-X 1000i 1RU/2RU/3RU/4RU ENCLOSURES
• Sliding tray glides forward (with stop) and backward, and removes (1RU, 2RU)
for easy field terminations and splicing
• 15" depth for high-density fiber termination and/or splicing
• Constructed of 16-gauge steel, powder-coated black
• 19" or 23" enclosure rack-mount option (23" 1RU mounting bracket sold separately)
• Enclosures protrude 4.5" from mounting ears to align with Versi-Duct® Cable Management System
• Accepts Opt-X adapter plates and/or Opt-X MTP® cassettes
• LightSpace® (LGX® footprint) compatible versions also available by special order
• Locking door option available on front, rear, or both doors
• Accessory kit consists of cable ties, mounting ear screws, and port ID label
• 1RU and 2RU accept the Retrofit Sliding Tray, sold separately, for higher density applications
using Opt-X HDX MTP Cassettes
OPT-X 1000i RACK-MOUNT ENCLOSURES
DESCRIPTION
MAXIMUM CAPACITY
PART NO.
FIBERS
(USING LC)
ADAPTER
PLATES
AND
SPLICE
TRAYS*
OR
MTP
CASSETTES
Opt-X 1000i, 1RU, empty 72 3 3 3 5R1UM-F03
[A] Opt-X 1000i, 1RU, empty, sliding tray 72 3 3 3 5R1UM-S03
Opt-X 1000i, 2RU, empty 144 6 6 6 5R2UM-F06
Opt-X 1000i, 2RU, empty, sliding tray 144 6 6 6 5R2UM-S06
Opt-X 1000i, 3RU, empty, horizontal^ 216 9 12 9 5R3UM-F09
[B] Opt-X 1000i, 3RU, empty, vertical° 288 12 12 12 5R3UM-F12
[C] Opt-X 1000i, 4RU, empty, vertical° 288 12 12 12 5R4UM-F12
Opt-X 1000i, 4RU, empty, horizontal^ 360 15 12 15 5R4UM-F15
° = Vertical adapter plate/cassette orientation ^ = Horizontal adapter plate/cassette orientation
* = Maximum splice tray capacity is limited by height of selected splice tray. See page X13 for splice tray dimension and selection guide.
See pages B21-B24 for list of Opt-X adapter plates and cassettes.
Make to order! OPT-X 1000i RACK-MOUNT ENCLOSURE OPTIONS
ENCLOSURE STYLE ADAPTER PLATES OR
MTP CASSETTE SELECTION
ADAPTER
PLATE
QTY
FIBER
TYPE
ADAPTER
TYPE & PIGTAIL
SELECTION
SPLICE TRAY STYLE
NO. OF
SPLICE
TRAYS
SECURITY
OPTIONS
CABLE
CLAMP
KIT
MOUNTING
EAR
POSITION
• 1RU Opt-X
• 2RU Opt-X
• 1RU or 2RU
Opt-X w/tray
• 3RU or 4RU
Opt-X w/horizontal
adapter plates
• 3RU or 4RU
Opt-X w/ vertical
adapter plates
• 6 fibers (SC, ST)
• 8 fibers (SC, ST)
• 12 fibers (LC, SC, ST only)
• 16 fibers (LC only)
• 24 fibers (LC only)
• MTP Cassette - 12 fibers
(LC, SC, ST)
• MTP Cassette - 24 fibers
(LC only)
• 1-15 • OM1
• OM2
• OM3
• OM4
• OS2
• LC
• LC + pigtail
• SC
• SC/APC
• SC + pigtail
• SC/APC +
pigtail
• ST
• ST + pigtail
• Heat shrink, foam holders,
up to 12 fibers (molded tray)
• Heat shrink, plastic holders,
up to 12 fibers (molded tray)
• Bare fusion, plastic holders,
up to 12 fibers (metal tray)
• Heat shrink, plastic holders,
up to 24 fibers (molded tray)
• 1-12
• None
• Locking
front
door
• Locking
rear
door
• Both
doors
• None
• Ye s
• No
• 19"
• 23"
For assistance customizing your enclosures, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
RECOMMENDED
APPLICATIONS:
Equipment Room
Telecommunications
Room
19" and 23" Racks
and Cabinets
BA C
B17 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
Opt-X
enclosure system
FIBER
OPT-X® ENCLOSURE SYSTEM | Rack-Mount Enclosures > Opt-X 500i
OPT-X 500i FLUSH-MOUNT RACK ENCLOSURES
• Flush-mount adapter bulkhead makes moves, adds, and changes easy
• One-piece removable cover allows for complete accessibility to the back of the enclosure
• Constructed of 16-gauge steel, powder-coated black
• Accepts Opt-X adapter plates and/or Opt-X MTP® cassettes
• Accepts injection-molded splice trays and 4'' x 7'' metal splice trays
• Enclosure is capable of storing up to 3 meters of 900 m tight-buered fiber per adapter
• Accessory kit consists of cable ties, mounting ear screws, and port ID label
• Optional universal clamp kits (for installation on side of enclosure or on rack post)
• 1RU and 3RU flush-mount panels accept Opt-X adapter plates and mount to 19'' racks and cabinets
• Optional add-on patch cord cable management tray (sold separately) uses existing rack unit
OPT-X 500i RACK-MOUNT ENCLOSURES
DESCRIPTION
MAXIMUM CAPACITY
PART NO.
FIBERS
(USING LC)
ADAPTER
PLATES
AND
SPLICE
TRAYS*
OR
MTP
CASSETTES
[A] Opt-X 500i, 1RU Enclosure, empty 72 3 3 3 5R1UL-F03
[B] Opt-X 500i, 2RU Enclosure, empty 144 6 6 6 5R2UL-F06
[C] Opt-X 500i, 3RU Enclosure, empty 288 12 12 12 5R3UL-F12
[D] Opt-X 500i, 1RU Panel, empty 72 3 N/A 3 5R1UE-OPX
[E] Opt-X 500i, 3RU Panel, empty 288 12 N/A 12 5R3UE-OPX
* = Maximum splice tray capacity is limited by height of selected splice tray. See page X13 for splice tray dimension and selection guide.
See pages B21-B24 for list of Opt-X adapter plates and cassettes.
RECOMMENDED
APPLICATIONS:
Equipment Room
Telecommunications
Room
19" Racks and Cabinets
Patch Cord Management Trays help route and organize cables on Opt-X 500i
enclosures. The trays feature identification labels and front saddles that pivot
for easier routing. Because they mount directly to the front of the enclosures,
they do not require additional rack space. Available in 1RU and 2RU sizes, the
trays can be used with any Leviton 1RU flush-mount MTP enclosure and 2RU
trays can be used with 3RU 500i enclosures.
SPOTLIGHT Patch Cord Management Tray
BA C
D E
B18
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
Opt-X
enclosure system
FIBER
OPT-X® ENCLOSURE SYSTEM | Wall-Mount Enclosures > Opt-X 1000
The Leviton Fiber-to-the-Home (FTTH) Point of Entry Box is designed for
applications in Multi Dwelling Units (MDUs) and single-family homes. It provides
a convenient location to terminate incoming fiber from the service provider to
pigtails at the subscriber’s premises. The box includes an SC/APC adapter with
two dust caps, as well as two splice sleeves. It can be mounted in the Structured
Media® enclosure or as a stand-alone unit on a wall, and comes with an adhesive
magnet for easy installation and place adjustments. See page F12 for details.
RECOMMENDED
APPLICATIONS:
Telecommunications
Room
Equipment Room
OPT-X 1000 WALL-MOUNT FIBER OPTIC ENCLOSURES
• Self-healing grommet material protects cable and minimizes dust build-up
• Adjustable fiber management rings easily attach to mounting studs
• Ground terminal lug provides grounding option or cable strain relief
• Cutout on side of enclosure allows access to adapter bulkhead when doors are open
• Door options: split with single lock on service side (optional lock available to install
on customer side), solid with or without single lock on customer side
• Constructed of 16-gauge steel, powder-coated black
OPT-X 1000 SMALL WALL-MOUNT ENCLOSURES
DESCRIPTION
MAXIMUM CAPACITY
PART NO.
FIBERS
(USING LC)
ADAPTER
PLATES
AND
SPLICE
TRAYS*
OR
MTP®
CASSETTES
Small, empty, solid metal door, no lock 48 2 N/A 2 5W110-00N
[A] Small, empty, split metal door and one lock/key 48 2 N/A 2 5W120-00N
Small, empty, solid metal door and one lock/key 48 2 N/A 2 5W170-00N
OPT-X 1000 MEDIUM WALL-MOUNT ENCLOSURES
Medium, empty, solid metal door, no lock 96 4 6 4 5W310-00N
[B]
Medium, empty, split metal door and one lock/key
96 4 6 4 5W320-00N
Medium, empty, solid metal door and one lock/key
96 4 6 4 5W370-00N
OPT-X 1000 LARGE WALL-MOUNT ENCLOSURES
[C] Large, empty, solid metal door, no lock 288 12 6 12 5W710-00N
Large, empty, split metal door and one lock/key 288 12 6 12 5W720-00N
Large, empty, solid metal door and one lock/key 288 12 6 12 5W770-00N
ACCESSORIES
Lock and Key 5L000-L0K
* = Maximum splice tray capacity is limited by height of selected splice tray. See page X13 for splice tray dimension and selection guide.
See pages B21-B24 for list of Opt-X adapter plates and cassettes.
SPOTLIGHT Fiber-to-the-Home Point of Entry Box
BA C
B19 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
Opt-X
enclosure system
FIBER
OPT-X® ENCLOSURE SYSTEM | Rack-Mount > VertiGO®
VERTIGO ZERO-U PATCH PANELS
• All styles sold empty, with either QuickPort® or Opt-X style openings
• Zero-U uses no rack space
• Low-profile design fully covers connections
• Improves cabinet center airflow by routing rear cable along outer edges
• Styles with 3" and 6" channels* provide additional cable management space
• Hinged doors provide easy access to termination field
• Magnified label holders make for easy reading
• Supports copper and fiber installations
*Not available as stand-alone pieces and must be purchased as a complete unit.
VERTIGO RACK-MOUNT PLUG-N-PLAY PATCH PANELS
• Pre-configured for fast network deployment
• Adjustable mounting ears provide five unique oset distances for enhanced horizontal cable management
• Integrated cable manager
• Accepts all Opt-X adapter plates, allowing for a mix of copper, fiber, and multimedia connectivity
• Provides either MTP® Plug-n-Play or discrete point termination
• All VertiGO Rack-Mount Plug-n-Play Patch Panels sold as custom configurations; call 800.722.2082 for more information
VERTIGO FIBER PLUG-N-PLAY PATCH PANELS
• Pre-configured for fast network deployment
• Mounts vertically to standard 19" racks or cabinets while consuming no horizontal rack space
• Accepts all Opt-X adapter plates, allowing for a mix of copper, fiber, and multimedia connectivity
• Internal metal divider provides separation of copper and fiber cabling
• Provides either MTP Plug-n-Play or discrete point termination
• Can mount to the back rails of racks and cabinets, ladder tray, walls, or in under-floor applications for maximum versatility
• All VertiGO Fiber Plug-n-Play Patch Panels sold as custom configurations; call 800.722.2082 for more information
VERTIGO ZERO-U PATCH PANELS
DESCRIPTION PART NO.
Opt-X Adapter Plate Zero-U, panel only 49280-AP0
[A] Opt-X Adapter Plate Zero-U, panel with 3" cable channel 49280-AP3
Opt-X Adapter Plate Zero-U, panel with 6" cable channel 49280-AP6
For VertiGO panels with QuickPort openings, see page A19.
VERTIGO ZERO-U VIDEO
Watch the training video at
leviton.com/videos: “How to Mount
Leviton's VertiGO Patch Panel.”
Fiber Plug-n-Play Patch PanelA VertiGO Rack-Mount Plug-n-Play Patch Panels
B20
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
Opt-X
enclosure system
FIBER
J
AB C DE F G H I
S TRK LM N OP Q
OPT-X ADAPTER PLATES
• Unique design works with Opt-X series enclosures, including the advanced Opt-X
Ultra®, as well as Opt-X 1000i, Opt-X 500i, and wall-mount Opt-X 1000
• Captive push/pull fasteners allow for quick, tool-free installation and removal
• Available in 6- to 24-fiber plates for LC, SC, and ST
• Available in 72- to 192-fiber plates for MTP®
• Fits in all standard Opt-X rack-mount and wall-mount enclosures and VertiGO® panels
• MTP and LC adapter plates with shutters available by special order
• 6-position QuickPort® Adapter plates (item T) accept all QuickPort modules
OPT-X RACK-MOUNT ENCLOSURE CAPACITY
1RU
FOR ULTRA 1000i & 500i 2RU
FOR ULTRA 1000i & 500i
3RU
FOR 1000i
3RU
FOR 500i
4RU
FOR ULTRA 1000i
Holds up to 3 adapter plates Holds up to 6 adapter plates Holds up to 9/12 adapter plates Holds up to 12 adapter plates Holds up to 12/15 adapter plates
6-pk Dplx LC = up to 36 fibers
6-pk Quad LC = up to 72 fibers
8-pk Dplx LC = up to 48 fibers
3-pk Dplx SC = up to 18 fibers
6-pk Dplx SC = up to 36 fibers
6-pk ST = up to 18 fibers
8-pk ST = up to 24 fibers
6-pk Dplx LC = up to 72 fibers
6-pk Quad LC = up to 144 fibers
8-pk Dplx LC = up to 96 fibers
3-pk Dplx SC = up to 36 fibers
6-pk Dplx SC = up to 72 fibers
6-pk ST = up to 36 fibers
8-pk ST = up to 48 fibers
6-pk Dplx LC = up to 108/144 fibers
6-pk Quad LC = up to 216/288 fibers
8-pk Dplx LC = up to 144/192 fibers
3-pk Dplx SC = up to 54/72 fibers
6-pk Dplx SC = up to 108/144 fibers
6-pk ST = up to 54/72 fibers
8-pk ST = up to 72/96 fibers
6-pk Dplx LC = up to 144 fibers
6-pk Quad LC = up to 288 fibers
8-pk Dplx LC = up to 192 fibers
3-pk Dplx SC = up to 72 fibers
6-pk Dplx SC = up to 144 fibers
6-pk ST = up to 72 fibers
8-pk ST = up to 96 fibers
6-pk Dplx LC = up to 144/180 fibers
6-pk Quad LC = up to 288/360 fibers
8-pk Dplx LC = up to 192/240 fibers
3-pk Dplx SC = up to 72/90 fibers
6-pk Dplx SC = up to 144/180 fibers
6-pk ST = up to 72/90 fibers
8-pk ST = up to 96/120 fibers
OPT-X WALL-MOUNT ENCLOSURE CAPACITY
SMALL MEDIUM LARGE
Holds up to 2 adapter plates Holds up to 4 adapter plates Holds up to 12 adapter plates
6-pk Dplx LC = up to 24 fibers
6-pk Quad LC = up to 48 fibers
8-pk Dplx LC = up to 32 fibers
3-pk Dplx SC = up to 12 fibers
6-pk Dplx SC = up to 24 fibers
6-pk ST = up to 12 fibers
8-pk ST = up to 16 fibers
6-pk Dplx LC = up to 48 fibers
6-pk Quad LC = up to 96 fibers
8-pk Dplx LC = up to 64 fibers
3-pk Dplx SC = up to 24 fibers
6-pk Dplx SC = up to 48 fibers
6-pk ST = up to 24 fibers
8-pk ST = up to 32 fibers
6-pk Dplx LC = up to 144 fibers
6-pk Quad LC = up to 288 fibers
8-pk Dplx LC = up to 192 fibers
3-pk Dplx SC = up to 72 fibers
6-pk Dplx SC = up to 144 fibers
6-pk ST = up to 72 fibers
8-pk ST = up to 96 fibers
OPT-X® ENCLOSURE SYSTEM | Adapter Plates
Front Rear
Key Up / Key Down
Front Rear
Key Up / Key Up
B21 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
Opt-X
enclosure system
FIBER
OPT-X® ENCLOSURE SYSTEM | Adapter Plates
OPT-X PRECISION-MOLDED FIBER ADAPTER PLATES
DESCRIPTION PART NO.
[A] Adapter Plate (beige), 62.5 µm MM (OM1), Duplex LC, 12-fiber, zirconia ceramic sleeve 5F100-2IL
[B] Adapter Plate (black), 50 µm MM (OM2), Duplex LC, 12-fiber, zirconia ceramic sleeve 5F100-2EL
[C] Adapter Plate (aqua), 50 µm LOMM (OM 3 & 4), Duplex LC, 12-fiber, zirconia ceramic sleeve 5F100-2QL
[D] Adapter Plate (blue), SM (OS2), Duplex LC, 12-fiber, zirconia ceramic sleeve 5F100-2LL
[E] Adapter Plate (green), SM (OS2), Duplex LC/APC, 12-fiber, zirconia ceramic sleeve 5F100-2VL
[F] Adapter Plate (beige), 62.5 µm MM (OM1), Quad LC, 24-fiber, zirconia ceramic sleeve 5F100-4IL
[G] Adapter Plate (black), 50 µm MM (OM2), Quad LC, 24-fiber, zirconia ceramic sleeve 5F100-4EL
[H] Adapter Plate (aqua), 50 µm LOMM (OM3 & 4), Quad LC, 24-fiber, zirconia ceramic sleeve 5F100-4QL
[I] Adapter Plate (blue), SM (OS2), Quad LC, 24-fiber, zirconia ceramic sleeve 5F100-4LL
Plates (beige), 62.5 m MM (OM1), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6IC
Plates (black), 50 m MM (OM2), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6EC
Plates (aqua), 50 m MM (OM3 & OM4), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6QC
Plates (blue), SM (OS2), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6LC
Plates (green), SM (OS2), Duplex SC/APC, 6-fiber, zirconia ceramic sleeve 5F100-6VC
[J] Adapter Plate (beige), 62.5 µm MM (OM1), Duplex SC, 12-fiber, zirconia ceramic sleeve 5F100-2IC
[K] Adapter Plate (black), 50 µm MM (OM2), Duplex SC, 12-fiber, zirconia ceramic sleeve 5F100-2EC
[L] Adapter Plate (aqua), 50 µm LOMM (OM3 & OM4), Duplex SC, 12-fiber, zirconia ceramic sleeve 5F100-2QC
[M] Adapter Plate (blue), SM (OS2), Duplex SC, 12-fiber, zirconia ceramic sleeve 5F100-2LC
[N] Adapter Plate (green), SM (OS2), Duplex SC/APC, 12-fiber, zirconia ceramic sleeve 5F100-2VC
[O] Adapter Plate (black), ST MM/SM, 6-fiber, zirconia ceramic sleeve 5F100-6MT
[P] Adapter Plate (black), ST MM/SM, 8-fiber, zirconia ceramic sleeve 5F100-8MT
[Q] Adapter Plate (black), Blank 5F100-PLT
OPT-X FIBER ADAPTER PLATES, METAL
Adapter Plate (black), OM1 & 2, Duplex LC (beige), 16-fiber, phosphor bronze sleeve 5F100-16P
[R] Adapter Plate (black), OM3 & 4, Duplex LC (aqua), 16-fiber, zirconia ceramic sleeve 5F100-16A
Adapter Plate (black), OS2, Duplex LC (blue), 16-fiber, zirconia ceramic sleeve 5F100-16Z
[S] Adapter Plate (black), 6 simplex MTP, key up/key down 5F100-6MP
Adapter Plate (black), 6 simplex MTP, key up/key up 5F100-6MB
Adapter Plate (black), 8 simplex MTP, key up/key down 5F100-8MP
Adapter Plate (black), 8 simplex MTP, key up/key up 5F100-8MB
[T] Adapter Plate (black), 6-position QuickPort®, Empty 5F100-6QP
Additional adapter plate configurations available. Please
contact Tech Support at 800.824.3005 for more information.
SPOTLIGHT Opt-X Precision-Molded Adapter Plates
Traditional adapter plate construction typically uses independent
couplers inserted in a metal plate that often results in a “rattling”
of components. Leviton Opt-X Adapter Plates eliminate rattling and
loose-fitting adapters by using precision molding and integrated
adapters, improving the overall performance, functionality, and quality
of construction. All multimode and single-mode Opt-X plates feature
zirconia ceramic sleeves, providing high performance and low insertion
loss (recommended for applications requiring 10 Gbps and higher).
B22
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
Opt-X
enclosure system
FIBER
MTP PREMIUM CASSETTES
• Plug-n-play cassette eliminates the need for field termination or splices
• Each cassette supports up to 24 fibers (LC)
• Bend-insensitive fiber used in OM3/OM4 cassette
• All premium 12-fiber MTP cassettes use low-loss MTP connectors
• Low insertion loss of 0.5 dB maximum
• 100% factory tested with test results included with each cassette
• See specific enclosure pages for MTP cassette capacity
• Violet color option available for OM4
OPT-X CASSETTES, COMMON CONFIGURATIONS
DESCRIPTION PART NO.
MTP Cassette, 12-fiber MTP-LC FM-*012CACO+
[A] MTP Cassette, 12-fiber MTP-SC FM-*012BAC0+
[B] MTP Cassette, 24-fiber 2x12F MTP-LC FM-*024CAC0+
* = fiber type: A = OS2, E = OM3, or F = OM4
+ = Polarity: A=Method A, C=Method C, BC = Method B (core), BE = Method B (edge). For Method B, each channel must have 1 core and 1 edge cassette.
Make to order! MTP PREMIUM CASSETTE OPTIONS
FIBER TYPE FIBER COUNT CONNECTOR TYPE MTP FIBER COUNT CASSETTE COLOR POLARITY
• OM1
• OM2
• OM3
• OM4 (aqua)
• OM4 (violet)
• OS2
• 12
• 24
• LC
• LC (w/shutters)
• LC/APC
• LC/APC (w/shutters)
• SC
• SC/APC
• MU
• 12 • Black (standard)
• Beige
• MTP Method A
• MTP Method B, Core, Black Latches
• MTP Method B, Edge, White Latches
• MTP Method C
For MTP Method B polarity, you must order one each of the Core and Edge cassettes.
For assistance customizing your cassettes, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
OPT-X® ENCLOSURE SYSTEM | MTP® Premium Cassettes
A B MTP-LC Cassette w/ Shutters
MTP-LC, 24-fiber, OM4
(OM4 violet color option)
The Industry’s Best Service & Support
LISA DOBBINS
Inside Sales Lead
For the past 10 years, Lisa has forged strong international relationships and delivered
outstanding customer service. Working with industry leaders across product
management, production, and warehouse and distribution, she continually supports
new processes to enhance eciency and optimize communication. Additionally, Lisa
has played a key role in streamlining customer support practices, advancing quicker
product and information turnarounds to meet a wide range of customer project needs.
New
B23 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
Opt-X
enclosure system
FIBER
OPT-X UNITY 40/100G MTP CASSETTES
• Available in Opt-X style footprint
• Allows easy migration from 10G to 40G or 100G
• Each cassette supports up to 48 fibers using MTP-MTP, or 24 fibers using MTP-LC
• All cassettes use either 24-fiber or 12-fiber low-loss MTP connectors
• Bend-insensitive fiber used in OM3/OM4 cassettes
• MTP-MTP cassettes are used with MTP array cords on page B54
• See specific enclosure pages for MTP cassette capacity
• Latches are color coded: black = Core, white = Edge
• Unity cassettes are Make-to-Order only
OPT-X UNITY 40/100G MTP CASSETTES, COMMON CONFIGURATIONS
DESCRIPTION PART NO.
[A] MTP Cassette, 24-fiber, 2x12F MTP-3x8F MTP, Method B FM -*024NCC0B†
[B] MTP Cassette, 48-fiber, 2x24F MTP-6x8F MTP, Method B FM -*048NDC0B†
MTP Cassette, 24-fiber, 24F MTP-LC, Method B FM -*024CDC0B†
MTP Cassette, 24-fiber, 24F MTP-3x8F MTP, Method B FM -*024NDC0B†
* = fiber type: OM3 (E), or OM4 (F) † = polarity: Core (C), or Edge (E) Each channel must have one Core and Edge cassette. Other MTP polarity options available.
For assistance customizing your cassettes, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
OPT-X® ENCLOSURE SYSTEM | MTP® Cassettes > Opt-X Unity 40/100G
Leviton is the first manufacturer to have an independent fiber channel verification completed. Our OM3 fiber
connectivity has been tested and shown to exceed performance requirements to support 10GBASE-S, and the Opt-X
Unity System has been shown to exceed the performance requirements for 40GBASE-SR4 and 100GBASE-SR10
standards. Both tests were performed by Intertek (ETL) to ensure compliance to the maximum insertion loss and link
distance requirements specified in the ANSI/TIA-568-C.3 and IEEE 802.3ba standards. The channels were configured
to show typical data center applications as well as maximum flexibility. This type of testing assures customers that our
fiber solutions will support their needs as they migrate to 10G, 40G, or 100G.
Mated-pair channel
tested by Intertek (ETL)
®
Tx Tx Tx Tx Tx Tx Tx Tx Tx Tx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx
Tx Tx Tx Tx Tx Tx Tx Tx Tx Tx
Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx
Tx Tx Tx Tx Rx Rx Rx Rx
40GBASE-SR4, 8-fiber MTP
100GBASE-SR10, 2x12-fiber MTPs
100GBASE-SR10, 24-fiber MTP
1x24-Fiber MTP
(back view)
2x12-Fiber MTP
(back view)
Two Configurations Available:
Electronics 8-Fiber MTP
Array Cord
24-fiber MTP to
3x8-fiber MTP Cassette
24-fiber MTP to
3x8-fiber MTP Cassette
Electronics1x24-fiber
MTP Trunk Cable
8-Fiber MTP
Array Cord
(x3) (x3)
SPOTLIGHT 10/40/100G Fiber Testing
BA
B24
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
Opt-X
enclosure system
FIBER
INJECTION-MOLDED SPLICE TRAYS
DESCRIPTION PART NO.
[A] 12-fiber Mini, 3.74" W x 5.59" L x 0.56" H (includes 14 heat-shrink splice sleeves) T5PLS-12F
[B] 24-fiber High-Density, 4.5" W x 7.63" L x 0.50" H (includes 26 heat-shrink splice sleeves) T5PLS-24F
[C] Splice Tray Mounting Hardware Kit SPLMT-HKT
OPT-X 12- & 24-FIBER SPLICE MODULES*
Opt-X 12-Fiber LC Splice Module SPLCS-12x
Opt-X 24-Fiber LC Splice Module SPLCS-24x
[D] Opt-X 12-Fiber SC Splice Module SPSCS-12x
SPLICE HOLDERS
Splice Holder, heat shrink (black plastic), 6-fiber capacity FSHHS-P06
Splice Holder, heat shrink (black plastic), 8-fiber capacity FSHHS-P08
Splice Holder, heat shrink (black foam), 6-fiber capacity FSHSL-F06
Splice Holder, mini sleeves (black foam), 6-fiber capacity FSHMI-F06
Splice Holder, micro sleeves (black foam), 6-fiber capacity FSHMR-F06
Splice Holder, bare fusion, 12-fiber capacity FSHBF-P12
Splice Holder, heat shrink (LGX® footprint), 6-fiber capacity FSHAT-F06
Splice Holder, ribbon, 6 position, 72-fiber capacity FSHRB-F06
FUSION SPLICE SLEEVES
Mini Splice Tray, heat shrink T47HS-P06
Mini Splice Tray w/ stando, heat shrink 5T000-00T
Standard Splice Tray, bare fusion T4LBF-P06
* = Additional fiber types and connector combinations are available. For assistance ordering, call 800.824.3005.
x = OM3 (A), OS2 (L), APC OS2 (V)
Note: Splice tray mounting hardware sold separately except as noted. Additional configurations available including mechanical splice. Contact inside sales at
800.824.3005
for more information.
OPT-X® ENCLOSURE SYSTEM | Splice Trays & Splice Holders
INJECTION-MOLDED SPLICE TRAYS
• 12-fiber mini and 24-fiber high-density splice trays
• Protect and manage heat-shrink style spliced fibers
• Heat-shrink splice sleeves included
• Ratchet-action clamps with foam-rubber padding minimize
damage to fibers
• Compatible with Leviton Opt-X Ultra®, Opt-X 1000i, and
Opt-X 1000 series, plus LightSpace® wall-mount enclosures
• 12-fiber splice tray compatible with Leviton network
interface devices (NIDs); when stacking splice trays, only
use lids on top tray
OPT-X 12- & 24-FIBER SPLICE MODULES
• Integrates fiber adapter bulkhead (12 or 24 fibers) and
splice holders, eliminating the need of splice trays
• Individual compartments provide slack storage and bend
radius guides for respective backbone cable, 900 m tight
buer pigtails, and fusion-spliced fibers
• Modular design allows for ease of maintenance of
individual spliced fiber and allows for scaling up without
impacting existing fibers
• Available in single-mode (OS2) UPC & APC and laser-
optimized multimode (OM3) fiber types
SPLICE HOLDERS
• 6- and 12-fiber designs in foam and solid plastic options
• Mini, micro, and mechanical options available
• Styles accommodate the entire range of Leviton fusion
splice sleeves
BAC D
New
B25 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
Opt-X
enclosure system
FIBER
AVAILABLE FOR
OPT-X ULTRA®
OPT-X 1000i
OPT-X 500i
ACCESSORIES
DESCRIPTION PART NO.
[A] Universal Opt-X Clamp Kit, Single Cable Grommet (for enclosure mounting) 5RCMP-KIT XXX
Universal Opt-X Clamp Kit, Multiple Cable Grommet (for enclosure mounting) 5RCMP-KT2 XXX
[B] Universal Clamp Kit, Single and Multiple Cable Grommet (for rack mounting) 5RCMR-KIT XXX
1RU 23" Rack and Cabinet Mounting Bracket^ 5R1RU-023 XX
Replacement Door^ 5D000-*UN X
Replacement Door with Lock^ 5D000-*UL X
Replacement Covers^ 5C000-RPL X
Covers, metal^ 5CMTL-RPL X
[C] Fiber Cable Management ¼" Ring Kit (bag of four ¼" rings) 5R100-14R XXX
[D] Opt-X Ultra Patch Cord Bend Radius Bracket (bag of two)^ 5PCBR-*BT X
Lock and Key for Rack-Mount Enclosure 5L000-KAL X
[E] Patch Cord Management Tray, 1RU (for use with 1RU enclosure), 4" depth 5R1UL-CMT X
[F] Patch Cord Management Tray, 2RU (for use with 2 & 3RU enclosure), 4" depth 5R2UL-CMT X
Grounding Kit DPGRD-KIT XXX
^ = Minimum order quantity and lead times may apply.
* = Rack Units: 1RU (1), 2RU (2), 4RU (4)
OPT-X® ENCLOSURE SYSTEM | Accessories
OPT-X SYSTEM ACCESSORIES
• Cable clamp kits minimize excessive pulling, bending, and crushing
• Supports easy cable identification and decreases the need for tie-wraps inside the enclosure
• Fiber Cable Management Rings secure fiber slack
• Patch Cord Management Trays help route and organize cables, mount directly to the front of
the enclosures, and do not require additional rack space
SPOTLIGHT Cable Clamp Kits
Cable clamp kits minimize excessive pulling, bending, and crushing
forces on cable. The Opt-X Enclosure-Mount Universal Clamp Kit makes
it easy to identify cables, and decreases the need for tie-wraps inside
the enclosure. The kit also creates a transition point from jacketed cable
to buffered fiber or subunits. The Opt-X Rack-Mount Universal Clamp Kit
is ideal for vertical strain relief and strain relief at the top or bottom of a
rack/cabinet. Use it for installations with minimal vertical cable pathways
and little space for an enclosure-mount cable clamp kit.
Enclosure-Mount Universal Clamp Kit InstalledRack-Mount Universal Clamp Kit Installed
BA CD
FE
B26
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
Opt-X
enclosure system
FIBER
FIBE
R
FEATURED
PRODUCTS
Panels B29
Cassettes B30
e2XHD patching system
The e2XHD Copper and Fiber Patching System is an easy-to-connect, high-density
solution for enterprise and data center applications, where fast deployment and
simple maintenance are critical. The system includes 1RU and 4RU high-density
panels, copper and fiber snap-in cassettes, and accessories for additional cable
protection and management. The e2XHD cassettes quickly snap in and pull out
of the panels, making installation, moves, adds, and changes easier than ever. For
copper cassettes, see page A18.
e2XHD HIGH-DENSITY PATCH PANELS
High-density panels allow patching for up to 48 duplex fiber
channels in a 1RU panel or 192 channels in a 4RU panel.
e2XHD MTP-MTP Fiber Cassette, Core
e2XHD FIBER CASSETTES
Fiber MTP® Cassettes provide a simple migration path to 40G
or 100G networks. The cassettes are pre-terminated and available
in 12 or 24 fibers, OM3, OM4, or single mode.
The e2XHD Fiber Cassette features an MTP adapter that swivels to
three positions for easier cable routing. Used in conjunction with the
patching system’s rear cable manager and cable management rings,
the adapter delivers an ideal solution for eliminating cable tension
and ensuring proper bend radius.
e2XHD MTP-MTP Pass-Through Cassette
e2XHD 12-Fiber QuickPort® LC Cassette, OM3/OM4 - Aqua
e2XHD PATCHING SYSTEM | Introduction
The Industry’s Best Service & Support
DENNIS MANES, RCDD
Fiber and Data Center Principal Applications Engineer
Manager, Technical Support
Dennis has a hand in a little of everything at Leviton, and our satisfied customers are
thankful for it. He helps develop innovative new products while ensuring they meet
industry standards and user requirements. He designs data center layouts and cable
pathways, customized to each installation. He provides installation support for
operations nationwide and abroad. On top of all that, he leads Leviton’s team of
technical support representatives, ready to assist customers with product,
installation, and design support. With all his expertise and tireless eort,
sometimes we wonder if Dennis has a secret twin or clone army.
B28
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
e2XHD
patching system
FIBER
E2XHD PATCHING SYSTEM | Panels, Cable Managers, Covers & Tools
HIGH-DENSITY PANELS
• 1RU panels hold up to 8 single-height fiber cassettes
(48 fiber channels)
• 4RU panels hold up to 32 single-height fiber cassettes
(192 fiber channels)
• Alignment tabs on panels ensure upright insertion
of cassettes
• Mount on standard 19" racks or cabinets
ANGLED PANEL COVER
• Uses no additional rack space
• Minimizes dust and debris behind panels
• Attaches directly to e2XHD Angled Panel
• Can be retrofitted after panel is installed
• Can be used for top and bottom of panels
REAR CABLE MANAGERS
• Support both fiber and copper cables
• Cable management rings included to help manage
and route incoming fiber cables
• Built-in VELCRO® Brand tie downs secure cables
• Optional Clamp Kits available to provide cable
strain relief for incoming cables
• Flat Panel Manager mounts to rack or cabinet;
screws included
• Angled Panel Manager attaches directly to panels;
screws included
e2XHD PATCHING SYSTEM VIDEO
Watch the training video
at leviton.com/videos:
“e2XHD Patching System
for Data Center Networks.”
e2XHD PATCHING SYSTEM PANELS, CABLE MANAGERS, COVERS & TOOLS
DESCRIPTION PART NO.
[A] e2XHD 1RU High-Density Angled Panel E2X1A-D48
[B] e2XHD 4RU High-Density Angled Panel E2X4A-192
[C] e2XHD 1RU High-Density Flat Panel E2X1F-D48
e2XHD 4RU High-Density Flat Panel E2X4F-192
[D] e2XHD Rear Cable Manager for Angled Panel, with cable management rings E2XHD-CMB
[E] e2XHD Rear Cable Manager for Flat Panel, with cable management rings E2X1F-CMB
[F] e2XHD Angled Panel Cover E2XHD-COV
[G] QuickPort® Connector Removal Tool E2XHD-JRT
[H] Universal Opt-X® Clamp Kit, Single Cable Grommet (mounts to Rear Cable Manager) 5RCMP-KIT
Universal Opt-X Clamp Kit, Multiple Cable Grommet (mounts to Rear Cable Manager) 5RCMP-KT2
Universal Clamp Kit, Single and Multiple Cable Grommet (for rack mounting) 5RCMR-KIT
[I] Label Kit for e2XHD Panels (Qty 4) E2XHD-LBL
B
A
C1RU e2XHD High-Density Patch Panel with Label Kit
D
E
F
GH
I
New
B29 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
e2XHD
patching system
FIBER
E2XHD PATCHING SYSTEM | Cassettes
FIBER CASSETTES
• Used exclusively with e2XHD panels
• Available in MTP-MTP or MTP-LC
• Available in 12- or 24-fiber, OM3, OM4, OS2
• Allow for a simple migration path to 40GbE and 100GbE networks with MTP cassettes
• MTP adapter swivel allows for easy cable routing and proper bend radius
•
QuickPort
®
MTP-LC Cassette uses QuickPort modular fiber adapters, can be removed with QuickPort Connector Removal Tool
• All cassettes use either 24-fiber or 12-fiber low-loss MTP connectors
• Blank cassettes reserve capacity for future cassettes, easily snap into rear of panel to block unused cassette openings
e2XHD PATCHING SYSTEM CASSETTES
DESCRIPTION PART NO.
[A] e2XHD 24-fiber MTP-LC Fiber Cassette, Core (see options below)
[B] e2XHD 12-fiber MTP-LC Fiber Cassette, Core (OM4 violet shown) (see options below)
[C] e2XHD MTP-MTP Fiber Cassette, Core (see options below)
[D] e2XHD 24-fiber MTP-LC Fiber Cassette, Edge (1x24 Fiber MTP) (see options below)
[E] e2XHD 24-fiber MTP-MTP Fiber Cassette, Edge (2x24 Fiber MTP) (see options below)
[F] e2XHD 24-fiber MTP-MTP Fiber Cassette, Edge (1x24 Fiber MTP) (see options below)
[G] e2XHD 12-fiber QuickPort LC Cassette, OM3/OM4 - aqua E2XLC-AQU
e2XHD 12-fiber QuickPort LC Cassette, OS2 - blue E2XLC-BLU
[H] e2XHD MTP-MTP Pass-Through Cassette, four key-up/key-down adapters E2XHD-4MP
e2XHD MTP-MTP Pass-Through Cassette, four key-up/key-up adapters E2XHD-4MB
[I] e2XHD Cassette Blank E2XHD-BLK
Make to order! e2XHD MTP FIBER CASSETTE OPTIONS
FIBER TYPE FIBER
COUNT CONNECTOR TYPE MTP FIBER
COUNT FOOTPRINT COLOR POLARITY
• OM3
• OM4 (aqua)
• OM4 (violet)
• OS2
• 8
• 12
• 24
• LC
• 8F MTP (female)
• 12F MTP
• 24F MTP
• 12 Fiber (single cassette height)
• 24 Fiber (double cassette height)
• MM aqua adapter
• SM blue adapter
• Black (MTP only)
• MM Violet Adapter
(OM4 only)
• Method A
• Method B, Core, black
• Method B, Edge, white
• Method C
For assistance customizing your cassettes, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
F G H I 8-Fiber MTP®-LC Cassette
ABCDE
New
New
B30
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
e2XHD
patching system
FIBER
FIBE
R
FEATURED
PRODUCTS
Enclosures B32
Adapter Plates B35
Splice Trays &
Holders B37
Splice Sleeves
& Enclosure
Accessories B38
LightSpace® enclosure system
Leviton oers a wide range of enclosures designed to protect, manage, and organize
fiber splices across various indoor and outdoor environments. Specifically designed to
meet the requirements of service providers large and small, LightSpace enclosures are
ideal for central-oce, outside-plant, and fiber-to-the-premises applications.
LIGHTSPACE® ENCLOSURE SYSTEM | Rack-Mount > DP/DPS/DPC Series
KEY FEATURES
• Large cable management rings for enhanced jumper routing
• Front cable management saddles
• Side entry for backbone cable
• Constructed of high-strength aluminum, powder-coated central-oce white
• Mounts on standard 19" and 23" racks and cabinets
• Utilizes LightSpace adapter plates (see pages B35-B36)
RECOMMENDED
APPLICATIONS:
Central Office or
Head End, CLEC
19" and 23" Racks
and Cabinets
ABC
For assistance configuring your enclosures, please call Tech
Support at 800.824.3005 or visit leviton.com/configurator.
LIGHTSPACE DP OPTICAL DISTRIBUTION ENCLOSURES, STANDARD PART NUMBERS
DESCRIPTION
MAXIMUM CAPACITY
PART NO.
FIBERS
(USING LC)
ADAPTER
PLATES
AND
SPLICE
TRAYS*
DP-525, 3RU, empty^ 144 6 N/A DP03U-STD
[A] DP-700, 4RU, empty^ 288 12 N/A DP04U-STD
DP-105, 6RU, empty° 288 12 N/A DP06U-STD
LIGHTSPACE DPS OPTICAL SPLICE ENCLOSURES, STANDARD PART NUMBERS
DPS-525, 3RU, empty N/A N/A 4 DPS3U-STD
[B] DPS-700, 4RU, empty N/A N/A 6 DPS4U-STD
DPS-105, 6RU, empty N/A N/A 12 DPS6U-STD
LIGHTSPACE DPC OPTICAL DISTRIBUTION & SPLICE ENCLOSURES, STANDARD PART NUMBERS
DPC-525, 6RU, empty^ 144 6 4 DPC6U-033
[C] DPC-700, 8RU, empty^ 288 12 6 DPC8U-STD
DPC-105, 12RU, empty° 288 12 12 DPC12-066
* = Maximum splice tray capacity is limited by height of selected splice tray. See page X13 for splice tray dimension and selection guide.
^ = Accepts LightSpace (LGX® footprint) 6- or 8-pack adapter plates.
° = Accepts LightSpace 12-pack adapter plates.
DP SERIES OPTICAL DISTRIBUTION ENCLOSURES
• Removable front door
• Rear door with key lock option
• Upper and lower patch cord bend radius brackets
DPS & DPC SERIES OPTICAL SPLICE ENCLOSURES
• Front accessibility to splice trays
• Removable front door with key lock option
• Rear door with key lock option
• Connector identification label
B32
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
LightSpace
enclosure system
FIBER
LIGHTSPACE CPC SERIES CUSTOMER PREMISE ENCLOSURES
• Wide-swing radius doors provide full access during installation and maintenance
• Double doors with slam latches provide separation between service provider and customer
• Top or bottom cable entry
• Stackable, allowing for additional capacity
• Constructed of high-strength aluminum, powder-coated central-oce white
• Accepts all Leviton splice trays
• Utilizes LightSpace adapter plates (see pages B35-B36)
LIGHTSPACE CPS SERIES CUSTOMER PREMISE SPLICE ENCLOSURES
• Single-fixed left-hinged door with wide-swing radius design for easy access
• Top or bottom cable entry
• Stackable, allowing for additional capacity
• Padlock provision
• Constructed of high-strength aluminum, powder-coated central-oce white
• Accepts all Leviton splice trays
CPC CUSTOMER PREMISE ENCLOSURES, STANDARD PART NUMBERS
DESCRIPTION
MAXIMUM CAPACITY
PART NO.
FIBERS
(USING LC)
ADAPTER
PLATES
AND
SPLICE
TRAYS*
[A] CPC-12, empty 48 2 4 CPC12-STD
[B] CPC-24, empty 96 4 4 CPC24-STD
CPC-48, empty 192 8 6 CPC48-STD
CPS CUSTOMER PREMISE SPLICE ENCLOSURES, STANDARD PART NUMBERS
CPS-12, empty N/A N/A 4 CPS12-STD
CPS-24, empty N/A N/A 4 CPS24-STD
[C] CPS-48, empty N/A N/A 6 CPS48-STD
* = Maximum splice tray capacity is limited by height of selected splice tray. See page X13 for splice tray dimension and selection guide.
ABC
LIGHTSPACE® ENCLOSURE SYSTEM | Wall Mount > CPC Series
RECOMMENDED
APPLICATIONS:
Central Office or
Head End, CLEC
Wall Mount
RECOMMENDED
APPLICATIONS:
Central Office or
Head End, CLEC
Enterprise
B33 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
LightSpace
enclosure system
FIBER
LIGHTSPACE® ENCLOSURE SYSTEM | Wall Mount > Indoor/Outdoor
LIGHTSPACE NETWORK INTERFACE DEVICES (NIDS)
• 3500 model has double upper-hinge doors
• 502H model has a single upper-hinge door
• 530 model has a single left-hinge door
• 502H and 3500 models have padlock provision for added security
• All enclosures are custom configurable
• Unique hinging mechanism holds the door open for easy installation and servicing
• Utilizes LightSpace adapter plates (see pages B35-B36)
• Splice tray option available
NETWORK INTERFACE DEVICES (NID), STANDARD PART NUMBERS
DESCRIPTION
MAXIMUM CAPACITY
PART NO.
FIBERS
(USING LC)
ADAPTER
PLATES
AND
SPLICE
TRAYS*
OR
MTP®
CASSETTES
[A] NID 3500, double door, empty 12 1 1 N/A N3500-STD
[B] NID 502H, single door, empty 12 1 1 N/A N502H-STD
[C] NID 530, single door, left hinge, empty 8 0** 1 N/A N5300-STD
*Accepts 12-fiber Mini-Molded Splice Tray T5PLS-12F (page B25).
**Accepts 2 individual adapters (LC Duplex/SC Simplex).
Make to order! CUSTOM CONFIGURED NID OPTIONS
NID STYLE ADAPTER PLATE SELECTION FIBER TYPE ADAPTER TYPE & PIGTAIL SELECTION
• 502H
• 3500
• 530
• 6 fibers (SC, ST), (FN502, FN350 only)
• 2 fibers (SC, LC), (FN530 only)
• 8 fibers (SC, ST), (FN502, FN350 only)
• 4 fibers (SC, LC), (FN530 only)
• 12 fibers (SC, LC), (FN502, FN350 only)
• 8 fibers (LC) (FN530 only)
• OM1
• OM2
• OM3
• OM4 (aqua)
• OM4 (violet)
• OS2
• LC
• LC + pigtail
• SC
• SC/APC
• SC + pigtail
• SC/APC + pigtail
• ST
• ST + pigtail
For assistance customizing your NIDs, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
A CB
RECOMMENDED
APPLICATIONS:
Demarcation Point
Telecommunications
Room
Equipment Room
Wall Mount
Pigtails, splice tray,
and adapter plate
sold separately.
Closeup of adapters
B34
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
LightSpace
enclosure system
FIBER
LIGHTSPACE® ENCLOSURE SYSTEM | Adapter Plates
LIGHTSPACE ADAPTER PLATES
• Industry-standard style (LGX® footprint) adapter plates fit in all LightSpace wall-mount
and rack-mount enclosures, and NIDs
• Captive push/pull fasteners allow for quick, tool-free installation and removal
• Available in 6-, 8-, and 12-packs
• All 6- and 8-packs also available in black
• Available in LC, SC, ST, and MTP®
LIGHTSPACE RACK-MOUNT ENCLOSURE FIBER DENSITY CHART
OPTICAL DISTRIBUTION ENCLOSURES
DP/DPC 525 DP/DPC 700 DP/DPC 105
Holds up to six 6-pack or 8-pack plates
6-Pack = up to 36 fibers
8-Pack = up to 48 fibers
Duplex 6-Pack = up to 72 fibers
Quad 6-Pack = up to 144 fibers
Holds up to twelve 6-pack or 8-pack plates
6-Pack = up to 72 fibers
8-Pack = up to 96 fibers
Duplex 6-Pack = up to 144 fibers
Quad 6-Pack = up to 288 fibers
Holds up to twelve 12-pack plates
12-Pack = up to 288 fibers
ABCDE FGH I JKL
MNO PQRSTUVWX
B35 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
LightSpace
enclosure system
FIBER
LIGHTSPACE FIBER ADAPTER PLATES
DESCRIPTION PART NO.
[A] 6-Pack Duplex LC MM (12-fiber), beige, phosphor bronze sleeve APLW6-LDM
[B] 6-Pack Duplex LC Laser-Optimized MM (12-fiber), aqua, zirconia ceramic sleeve^ APLW6-LDL
[C] 6-Pack Duplex LC SM (12-fiber), blue, zirconia ceramic sleeve APLW6-LDS
[D] 6-Pack Quad LC MM (24-fiber), beige, phosphor bronze sleeve^ APLW6-LQM
[E] 6-Pack Quad LC SM (24-fiber), blue, zirconia ceramic sleeve^ APLW6-LQS
[F] 6-Pack Quad LC Laser-Optimized MM (24-fiber), aqua, zirconia ceramic sleeve^ APLW6-LQL
[G] 12-Pack (White) Duplex LC MM (24-fiber), beige, phosphor bronze sleeve (DP or DPC 105 Enclosure only)^ APL12-LDM
[H] 12-Pack (White) Duplex LC SM (24-fiber), blue, zirconia ceramic sleeve (DP or DPC 105 Enclosure only)^ APL12-LDS
[I] 6-Pack SC MM (6-fiber), beige, phosphor bronze sleeve APLW6-SCM
[J] 6-Pack SC SM (6-fiber), blue, zirconia ceramic sleeve APLW6-SCS
[K] 6-Pack SC/APC SM (6-fiber), green, zirconia ceramic sleeve APLW6-SCA
[L] 6-Pack Duplex SC MM (12-fiber), beige, phosphor bronze sleeve APLW6-SDM
[M] 6-Pack Duplex SC SM (12-fiber), blue, zirconia ceramic sleeve APLW6-SDS
6-Pack Duplex SC/APC SM (12-fiber), green, zirconia ceramic sleeve^ APLW6-SDA
[N] 8-Pack (White) SC MM (8-fiber), beige, phosphor bronze sleeve APLW8-SCM
[O] 8-Pack (White) SC SM (8-fiber), blue, zirconia ceramic sleeve APLW8-SCS
[P] 8-Pack (White) SC/APC SM (8-fiber), green, zirconia ceramic sleeve APLW8-SCA
[Q] 12-Pack (White) SC MM (12-fiber), beige, phosphor bronze sleeve (DP or DPC 105 Enclosure only)^ APL12-SCM
[R] 12-Pack (White) SC SM (12-fiber), blue, zirconia ceramic sleeve (DP or DPC 105 Enclosure only)^ APL12-SCS
[S] 12-Pack (White) SC/APC SM (12-fiber), green, zirconia ceramic sleeve (DP or DPC 105 Enclosure only)^ APL12-SCA
6-Pack ST MM (6-fiber), phosphor bronze sleeve APLW6-STM
[T] 6-Pack ST SM (6-fiber), zirconia ceramic sleeve APLW6-STS
[U] 8-Pack ST MM (8-fiber), phosphor bronze sleeve APLW8-STM
8-Pack ST SM (8-fiber), zirconia ceramic sleeve APLW8-STS
12-pack (White) ST MM (12-fiber), beige, phosphor bronze sleeve (DP or DPC 105 Enclosure only)^ APL12-STM
[V] 12-Pack (White) ST SM (12-fiber), blue, zirconia ceramic sleeve (DP or DPC 105 Enclosure only)^ APL12-STS
6-Pack MTP® MM (72-fiber), key up/key down APLW6-6MP
[W] Blank Plate, metal APLW6-BLK
[X] 12-Pack (White) blank (DP or DPC 105 Enclosure only)^ APL12-BLK
^ = Minimum order quantity and lead times may apply.
LIGHTSPACE® ENCLOSURE SYSTEM | Adapter Plates
LIGHTSPACE WALL-MOUNT ENCLOSURE FIBER DENSITY CHART
CUSTOMER PREMISE ENCLOSURES
CPC-12 CPC-24 CPC-48
Holds up to two 6-pack or 8-pack plates
6-Pack = up to 12 fibers
8-Pack = up to 16 fibers
Duplex 6-Pack = up to 24 fibers
Quad 6-Pack = up to 48 fibers
Holds up to four 6-pack or 8-pack plates
6-Pack = up to 24 fibers
8-Pack = up to 32 fibers
Duplex 6-Pack = up to 48 fibers
Quad 6-Pack = up to 96 fibers
Holds up to eight 6-pack or 8-pack plates
6-Pack = up to 48 fibers
8-Pack = up to 64 fibers
Duplex 6-Pack = up to 96 fibers
Quad 6-Pack = up to 192 fibers
Additional adapter plate configurations
available. Please contact Tech Support at
800.824.3005 for more information.
B36
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
LightSpace
enclosure system
FIBER
METAL SPLICE TRAYS
DESCRIPTION HEAT SHRINK (PLASTIC) HEAT SHRINK (FOAM) BARE FUSION
[A] 12-fiber Mini, 4" W x 7" L x 0.35" H T47HS-P06 — T47BF-P06^
12-fiber Mini, with stando 4" W x 7" L x 0.57" H 5T000-00T — —
12-fiber Standard, 4" W x 11.75" L x 0.35" H T4LHS-P06 T4LHS-F06^ T4LBF-P06
[B] 24-fiber High Density, 4" W x 11.75" L x 0.35" H T4LHS-P12 T4LHS-F12^ T4LBF-P12
[C] 12-fiber Standard, 5" W x 11.75" L x 0.35" H T5LHS-P06 T5LHS-F06^ T5LBF-P06
[D] 24-fiber High Density, 5" W x 11.75" L x 0.35" H T5LHS-B12 T5LHS-F12 T5LBF-P12^
RIBBON-STYLE SPLICE TRAYS
DESCRIPTION PART NO.
72-fiber Ribbon Style, quartz, 6" W x 10" L x 0.35" H T6XRB-40Q
SPLICE TRAY MOUNTING HARDWARE
[E] Splice Tray Mounting-Hardware Kit SPLMT-HKT
SPLICE HOLDERS
Splice Holder, heat shrink (black plastic), 6-fiber capacity FSHHS-P06
Splice Holder, heat shrink (black plastic), 8-fiber capacity FSHHS-P08
[F] Splice Holder, heat shrink (black foam), 6-fiber capacity FSHSL-F06
Splice Holder, mini sleeves (black foam), 6-fiber capacity FSHMI-F06
Splice Holder, micro sleeves (black foam), 6-fiber capacity FSHMR-F06
Splice Holder, bare fusion, 12-fiber capacity FSHBF-P12
Splice Holder, heat shrink (LGX® footprint), 6-fiber capacity FSHAT-F06
Splice Holder, ribbon, 6 position, 72-fiber capacity FSHRB-F06
^ = Minimum order quantity and lead times may apply.
Note: Splice tray mounting hardware sold separately except as noted. Additional configurations available including mechanical splice.
Contact inside sales at 800.722.2082 for more information.
LIGHTSPACE® ENCLOSURE SYSTEM | Splice Trays & Holders
ABC D
F
METAL SPLICE TRAYS
• Available in 4" and 5" sizes with 12- or 24-fiber capacity
• Heat-shrink, heat-shrink foam, and bare-fusion
styles available
• Mounting holes with space blocks prevent fiber damage
• Compatible with Opt-X® and LightSpace enclosures
• Splice tray selector is available online at
leviton.com/configurator
• Heat-shrink fusion splice sleeves sold separately
SPLICE HOLDERS
• 6- and 12-fiber designs in foam and solid plastic options
• Mini, micro, and mechanical options available
• Styles accommodate the entire range of Leviton
fusion splice sleeves
E
B37 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
LightSpace
enclosure system
FIBER
FUSION SPLICE SLEEVES
• Standard 40 mm and 60 mm sizes, plus mini
and micro sleeves for smaller trays and fibers
• Precise lengths free of all burrs and sharp edges
• Clear outer tube for viewing fiber color
LIGHTSPACE ENCLOSURE ACCESSORIES
Select cable clamp kits, key locks, strain-relief options,
or grounding solutions.
LIGHTSPACE
®
ENCLOSURE SYSTEM |
Splice Sleeves & Enclosure Accessories
FUSION SPLICE SLEEVES
DESCRIPTION STANDARD 50/PACK SLIM 100/
PACK MINI 100/PACK MICRO 100/PACK RIBBON 25/PACK
Fusion Splice Sleeve, 60 mm [A] FSSSD-060 FSSSL-060 — — —
Fusion Splice Sleeve, 40 mm FSSSD-040 FSSSL-040 FSSMI-040 FSSMR-040 —
Fusion Splice Sleeve, 25 mm — — FSSMI-025 FSSMR-025 —
Fusion Splice Sleeve, quartz, 40 mm — — — — FSSRB-Q40
LIGHTSPACE DP, DPS & DPC SERIES ACCESSORIES
DESCRIPTION PART NO.
[B] Cable Clamp Kit (.25" - 1.25" diameter) DPCMP-UNV
[C] Key Lock Kit DPLOK-KIT
[D] Grounding Kit DPGRD-KIT
LIGHTSPACE CPC & CPS SERIES ACCESSORIES
[E] Cable Clamp Kit (.25" - .50" diameter cable), use with CPC/CPS 12/24/48 CPCSR-001
[F] Cable Clamp Kit (.50" - .75" diameter cable), use with CPC/CPS 24/48 CPCSR-002
[G] Key Lock Kit CPLOK-KIT
[H] Grounding Kit, single cable CPGRD-KIT
A
SPLICE TRAY RECOMMENDED
SPLICE SLEEVE
T47HS-P06 FSSSD-040
T47BF-P06 FSSSD-040
5T000-00T FSSSD-040
T4LHS-P06 FSSSD-060
T4LHS-F06 FSSSD-060
T4LBF-P06 FSSSD-060
SPLICE TRAY RECOMMENDED
SPLICE SLEEVE
T4LHS-P12 FSSSD-040
T4LHS-F12 FSSSD-040
T4LBF-P12 FSSSD-040
T5LHS-P06 FSSSD-060
T5LHS-F06 FSSSD-060
SPLICE TRAY RECOMMENDED
SPLICE SLEEVE
T5LBF-P06 FSSSD-060
T5LHS-B12 FSSSD-040
T5LHS-F12 FSSSD-040
T5LBF-P12 FSSSD-040
T6XRB-40Q FSSRB-Q40
DH
BCE G
F
B38
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
LightSpace
enclosure system
FIBER
FIBE
R
FEATURED
PRODUCTS
Flush-Mount Enclosures
& Panels B40
flush-mount enclosures & panels
Leviton high-density Flush-Mount Enclosures and Panels are ideal for data center
server, zone, or MDA cabinet applications where space is crucial. These enclosures
utilize MTP® connections on the back with choice of fiber connectors on the front,
or can be pre-assembled with harnesses. Panels can accommodate up to 576
multimode or single-mode fibers, depending on connector style, and mount on
standard 19-inch racks and cabinets.
FLUSH MOUNT | Enclosures & Panels
The Opt-X® 500i Patch Cord Management Tray provides
convenient routing and protection using the same rack-unit
space as the enclosure. It can also be used with any Leviton
1RU Flush-Mount MTP to LC enclosure.
HIGH-DENSITY FLUSH-MOUNT ENCLOSURES & PANELS SERIES
• Staggered, ergonomic design allows easy access to connectors
• Incorporates logical port management (LPM) using custom silk-screening
(modular, numeric, and hexadecimal) for easy port identification
• Constructed of 16-gauge steel, powder-coated black
• Panel mounts on standard 19" racks and cabinets
• Accepts 1RU Patch Cord Management Tray (5R1UL-CMT)
• Larger enclosures (up to 10RU ) are available, contact Inside Sales to order
FLUSH-MOUNT ENCLOSURE & PANEL DENSITY, MAXIMUM FIBER COUNT
SIZE/TYPE LC SC ST MU
1RU Panel/Enclosure 96 72 72 72
1RU Panel, 72-fiber, OS2, MU
1RU Enclosure, 48-fiber OM3, MTP®-LC
1RU Panel, 72-fiber OM3, LC
Make to order! FLUSH-MOUNT ENCLOSURE & PANEL (1RU ONLY) OPTIONS
FIBER TYPE FIBER COUNT CONNECTOR TYPE MTP FIBER COUNT FOOTPRINT COLOR POLARITY
• OM1
• OM2
• OM3
• OM4 (aqua)
• OM4 (violet)
• OS2
• 24
• 36
• 48
• 72
• 96
• 144
• LC
• LC w/shutters
• SC
• ST
• MU
• 12 • 1RU Rack Mount • Black (standard)
• Beige
• A-A
• A-B
For assistance customizing your enclosures and panels, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
RECOMMENDED
APPLICATIONS:
Data Center Server,
Zone, or MDA
Equipment Room
Telecommunications
Room
19" Racks and
Cabinets
SPOTLIGHT Patch Cord Management Tray
B40
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
flush-mount
enclosures & panels
FIBER
FIBE
R
FEATURED
PRODUCTS
Vertical Patching
Brackets & Blade
Repliactors
B42
Replicator®
Enclosures B43
Mainframe B44
equipment-specific solutions
Leviton works closely with the biggest names in active network equipment to
create scalable, high-density data center networks. When combined with the
latest data center switches from Arista, Brocade, Cisco, and Extreme Networks,
Leviton connectivity provides design flexibility for your equipment architecture.
These solutions include new conversion harnesses and cassettes that break out
40GbE or 100GbE connections into individual 10GbE channels.
VERTICAL PATCHING BRACKETS
• Enable vertical mounting in a 19" rack
• Align or replicate patch panel/adapter plate ports with the ports that reside on servers or switches within the same
or adjacent rack/cabinet
• 48-port copper panels replicate typical 1G/10G copper switch blades
•
32, 48, and 64 fiber ports replicate typical fiber switch blades
• Up to ten 1RU copper/fiber patch panels and cable managers can be mounted vertically utilizing 10RU space
BLADE REPLICATORS
• Replicators provide one-to-one Logical Port Management (LPM) replication for the high-density blade fiber switches
• Blade Replicator supports Switches and Directors from Cisco, Brocade, Arista, and Extreme
• Mounting can be done horizontally or vertically using Leviton Vertical Patching Brackets
• Blade Replicator supports 32 ports, 48 ports, and 64 ports per blade
• Replicator kits simplify ordering. Kits can include the replicated patch panel, associated trunks, MTP® panels,
and harnesses
VERTICAL PATCHING BRACKETS
DESCRIPTION PART NO.
[A] Vertical Patching Bracket, 19" (set of two) VERPB-019
BLADE REPLICATORS
32-Port Blade, LC RPL-xxxx32PLC*
48-Port Blade, LC RPL-xxxx48PLC*
64-Port Blade, LC RPL-BRCD64PLC*
xxxx = For Arista Switch (ASTA), Brocade Switch (BRCD), Cisco Switch (CSCO), Extreme Switch (EXTM).
* = Fiber type: OM3 = 3, OM4 = 4.
SPECIFIC SOLUTIONS | Vertical Patching Brackets & Blade Replicators
EQUIPMENT-
For assistance configuring replicators,
please call 800.722.2082.
A
Brocade 32-PLC
Blade Replicator
Brocade 64-PLC
Blade Replicator
Courtesy of Brocade
Unauthorized use not permitted
Brocade DXC8510
B42
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
equipment-
specific solutions
FIBER
REPL-BRDE2400-LCMTP096OM3C:
Brocade 12/24k Replicator 8RU Enclosure,
96 channel, MTP® to LC, OM3, Fiber
REPL-CSCO9513-LCMTP576OM3C:
Cisco 9513 Replicator 8RU Enclosure, Beige,
288 channel, MTP to LC, OM3, Fiber
REPLICATOR ENCLOSURES
• Can be configured to replicate any switch
• Unique logical port management (LPM) design
• Kits available with trunks, MTP panels, and harnesses
• Full front access to all terminations via fold-down panel
• Shallow depth allows back-to-back mounting in cabinets and 4-post racks for high-density applications
• Up to 384-channel capacity (768 fiber strands)
• Available with LC and MU connector interfaces
TYPICAL REPLICATOR KIT TOPOLOGY
For assistance configuring
please call 800.722.2082.
MTP - MTP Trunk MTP - MTP Trunk
Main Distribution
.35dB Loss .35dB Loss
MTP - LC Harness MTP - LC Harness
LC - LC Jumper
Total Loss = 1.9dB
.25dB Loss .25dB Loss
In Equipment Zone In Equipment Zone
Storage
Device
Cisco
9513
Director
TIA-568-C.3
10 GBE Loss limit = 2.6dB
This topology results in 0.7dB margin.
.35dB .35dB
EQUIPMENT-SPECIFIC SOLUTIONS |
Replicator® Enclosures
Courtesy of Cisco Systems, Inc.
Unauthorized use not permitted
Cisco MDS 9513
B43 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
equipment-
specific solutions
FIBER
EQUIPMENT-SPECIFIC SOLUTIONS |
Mainframe
e2XHD CONVERSION CASSETTES
DESCRIPTION PART NO.
40G to 10G OM3, 8 fiber, MTP-LC Conversion Cassettes FME2XHD-E008CKQDJ
[A] 40G to 10G OM4, 8 fiber, MTP-LC Conversion Cassettes FME2XHD-F008CKQDJ
40G to 10G OS2, 8 fiber, MTP-LC Conversion Cassettes FME2XHD-A008CKQDJ
Single cable 100G to 10G OM3, 24 fiber, MTP-LC Conversion Cassettes FME2XHD-E024CKQES4
[B] 100G to 10G OM4, 24 fiber, MTP-LC Conversion Cassettes FME2XHD-F024CKQES4
100G to 10G OS2, 24 fiber, MTP-LC Conversion Cassettes FME2XHD-A024CKQES4
Make to order! OPT-X UNITY CONVERSION FIBER HARNESSES
FIBER TYPE FIBER COUNT CONNECTOR 1ST END (MTP) CONNECTORS 2ND END CABLE LENGTH BREAKOUT LENGTH (INCHES)
• OM3
• OM4 (aqua)
• OM4 (violet)
• 8
• 24
• Male
• Female
• LC
• Uniboot LC
• Custom lengths
in feet and
meters
• 12-48
• Other
For assistance customizing your harnesses, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
FIBER PLUG-N-PLAY MTP BRACKETS^
DESCRIPTION 6 MTP ADAPTERS 9 MTP ADAPTERS 10 MTP ADAPTERS 12 MTP ADAPTERS
Straight Bracket w/ Adapters [C] FB106-0ST FB109-0ST — —
90˚ Angled Bracket w/ Adapters FB106-090 [D] FB109-090 — —
Standard 12 MTP-Adapter Bracket — — — [E] FB112-000
Straight Vertical MTP Bracket — — [F] FB110-VST —
45˚ Angled MTP Bracket, Left Hand Mount — — — [G] FB112-L45
45˚ Angled MTP Bracket, Right Hand Mount — — — FB112-045
^ = Minimum order quantity and lead times may apply. Horizontal cable managers sold separately, see page C15.
ED
CFMcDATA Switch
McDATA Switch Z9 IBM
Z9 IBM
IBM Z9 & 196
8-Fiber MTP®-LC
Unity Conversion Harness
OPT-X® UNITY CONVERSION FIBER HARNESSES
• Small diameter cable for dense connectivity
• Uses bend insensitive fiber; lowers risk for pinched cables
• Available with optional reversing polarity LC Uniboot
• Low-loss MTP connector 0.35dB Max IL
FIBER PLUG-N-PLAY MTP BRACKETS
• Available in various sizes and configurations to
accommodate 6 to 12 adapters
• Mount to back rail (right or left side) of racks and
cabinets, freeing up valuable space
• Provide direct connection to the mainframe using trunk
cables and MTP harnesses
• Available with shutters
A
BG
100G TO 10G & 40G TO 10G e2XHD CONVERSION CASSETTES
• Low-loss MTP connector 0.35dB Max IL; LC connector at 0.15dB typical IL
• Bend-insensitive fiber is low risk for pinched cables
• Compatible with reversing polarity LC Uniboot patch cords
• Cassettes fit all e2XHD panel configurations
B44
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
equipment-
specific solutions
FIBER
FIBE
R
FEATURED
PRODUCTS
Opt-X® Unity
40/100G System
Pre-Terminated
Trunk Cables B47
Harnesses B51
Array Cords B54
Premium & Economy
Fiber Optic Cable
Assemblies B55
pre-terminated
cable assemblies & patch cords
Simplify fiber connection and termination with Leviton cable assemblies. Take
advantage of our new Secure Keyed LC and Opt-X Unity 40/100G assemblies
to protect and future-proof your critical networks. Pre-terminated trunk cables
and harnesses, plus multimode, single-mode, and pigtail assemblies are all
made to customer specifications. Choose cable type, connector combinations,
length, mode, and more. Configure online at leviton.com/configurator or use the
configurators in this catalog.
CABLE ASSEMBLIES & PATCH CORDS | Make-to-Order (MTO) Overview
BUILD YOUR OWN PRODUCTS
WITH LEVITON'S MAKE-TO-ORDER PROGRAM
We’ve made building the exact solution for your network quicker and
easier than ever. Rely on our innovative online custom configurators
for a wide variety of fiber and copper products.
MAKE-TO-ORDER CABLE ASSEMBLIES
• Pre-Terminated Fiber Trunks
• Fiber MTP® Harnesses
• Secure Keyed LC Cable Assemblies
• Fiber Optic Patch Cords
• Pigtails
PUSH
PUSH PUSH
PUSH
PUSH PUSH
PUSH PUSH PUSH PUSH PUSH
PULL PULL PULL PULL PULL PULL
PULL PULL
PULL
PULL PULL
PULL
PUSH
LABEL LABEL
BREAKOUT LENGTH (IN)
BREAKOUT LENGTH (IN)
CABLE LENGTH (FT)
FIBER TYPE
CABLE TYPE
FIBER COUNT
ALIGNMENT: STAGGERED
(1.5" every sub-unit of 12 fibers)
ALIGNMENT: EVEN
BREAKOUT LEG BREAKOUT LEG
SECOND-END
TERMINATION
FIRST-END
TERMINATION
NOTE: OPTIONAL PULLING EYE ON FIRST END (not shown)
FIBER TRUNK CABLE DIAGRAM (CUSTOMIZE AT LEVITON.COM/CONFIGURATOR)
Our engineers can also work with you to design and manufacture a solution that meets your specific application needs.
For questions or assistance configuring your products, please call Network Solutions Support at 800.824.3005.
Leviton Secure Keyed LC Fiber Systems prevent unauthorized and inadvertent
changes in highly sensitive applications such as government data centers,
telecommunications rooms, workstation areas, and secure IT networks, creating
an ideal “lock-in” system. Once connected to a port, the locking design — built
into the body of each duplex LC connector — prevents removal by hand, and
the connector can only be removed with a matching-color extraction tool. Eight
keyed connector colors are available to segregate networks. The system is made
up of trunks, harnesses, patch cords, pigtails, connectors, port protection plugs,
extraction tools, and QuickPort® fiber adapters. All Secure Keyed LC assemblies
and connectors work with any industry-compliant LC duplex or quad adapter.
SPOTLIGHT Secure Keyed LC Fiber System
PRE-TERMINATED
B46
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
& PATCH CORDS | Pre-Terminated Trunk Cables > Opt-X® Unity 40/100G
OPT-X UNITY 40/100G PRE-TERMINATED TRUNK CABLES
• MTP to MTP trunk cables support 40/100G speeds
• Terminations available in 8-, 12-, and 24-fiber configurations
• Migration solution to 40/100G from existing 10G networks with premium 12-fiber MTP
trunk configuration
• Up to 70% faster install than field-terminated trunks
• All orders customized for cable type, length, staggering, fiber count, and labeling
• MTP polarity options are TIA methods A, B, or C (Method B is standard)
• 100% factory tested, with test results included for each assembly
• All assemblies labeled with serial number and length for traceability and easy re-order
MTP®-MTP (2x12)
Connector detail
MTP-MTP (1x24)
10G
Leviton components for a 10G channel
include 24-fiber MTP-LC cassettes
and LC duplex patch cords.
40G
Migration from 10G to a 40G system
replaces LC with MTP components, such
as 2x12-fiber to 3x8-fiber MTP cassettes
and 8-fiber MTP array cords.
100G
Moving from 40G to 100G replaces MTP
cassettes with MTP adapter plates and
uses 24-fiber MTP array cords.
12- or 24-fiber MTP Trunk Cable
MTP MTP
See page B6 for
Opt-X Unity 40/100G
system overview.
SPOTLIGHT Migration Path to 40G & 100G
New Leviton pre-terminated MTP solutions offer an ideal migration path from 10G to 40G and 100G channels. The Opt-X Unity
40/100G system features MTP trunks, harnesses, array cords, adapter plates, and cassettes to help future-proof your networks. The
Opt-X Unity system is fully compatible with Opt-X HD, Opt-X, and e2XHD footprints.
MTP-MTP (1x24) (Violet OM4+)
PRE-TERMINATED CABLE ASSEMBLIES
New
B47 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
OPT-X UNITY 40/100G MTP TRUNKS, STANDARD EXAMPLE PART NUMBERS
DESCRIPTION PART NO.
OM3, Plenum, 24-fiber, 100 feet, pulling eye, Method B FT-EB024JJ100F36C36CY-NNBS
OM4, Plenum, 24-fiber, 100 feet, pulling eye, Method B FT-FB024JJ100F36C36CY-NNBS
OM4, MDP Plenum, 24-fiber, 100 feet, pulling eye, Method B – NEW MDP small O.D. cable FT-FM024JJ100F36C36CY-NNBS
OM3, Plenum, 48-fiber, 100 feet, pulling eye, Method B FT-EB048JJ100F36C36CY-NNBS
OM4, Plenum, 48-fiber, 100 feet, pulling eye, Method B FT-FB048JJ100F36C36CY-NNBS
OM4, MDP Plenum, 48-fiber, 100 feet, pulling eye, Method B– NEW MDP small O.D. cable FT-FM048JJ100F36C36CY-NNBS
OM3, Plenum, 144-fiber, 100 feet, pulling eye, Method B FT-EB144JJ100F36C36CY-NNBS
OM4, Plenum, 144-fiber, 100 feet, pulling eye, Method B FT-FB124JJ100F36C36CY-NNBS
OM4, MDP Plenum, 144-fiber, 100 feet, pulling eye, Method B– NEW MDP small O.D. cable FT-FM124JJ100F36C36CY-NNBS
Make to order! OPT-X UNITY 40/100G MTP TRUNK CABLE OPTIONS
FIBER TYPE CABLE TYPE FIBER
COUNT TERMINATION
CABLE
LENGTH
(FEET)
BREAKOUT
LENGTH
(INCHES)
BREAKOUT LEG
TYPE FIRST- &
SECOND-END
TERMINATION
POLARITY LABELING
• OM3
• OM4
(aqua)
• OM4
(violet)
• OM4+
(aqua)
• OM4+
(violet)
• OS2
• Riser I/O Dry Loose Tube
• Plenum I/O Dry Loose
Tube (standard)
• Plenum Armor I/O
Dry Loose Tube
• LSZH I/O Dry Loose Tube
• MDP Plenum
• MDP Plenum Armor
• 12
• 24
• 36
• 48
• 72
• 96
• 144
FIRST END
• 24 F MTP (male)
• 24 F MTP (female)
• Premium 12 F MTP (male)
• Premium 12 F MTP (female)
SECOND END
• 24 F MTP (male)
• 24 F MTP (female)
• Premium 12 F MTP (male)
• Premium 12 F MTP (female)
• 1-999 • 12-99
(36" is typical)
• 3-mm
Jacketed
12-Fiber
• 3.8-mm
Jacketed
24-Fiber
• MTP Method A
• MTP Method B
(standard)
• MTP Method C
• Standard
• Custom
For assistance customizing your Opt-X Unity trunks, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
& PATCH CORDS | Pre-Terminated Trunk Cables > Opt-X® Unity 40/100G
Tx Tx Tx Tx Rx Rx Rx Rx
Tx Tx Tx Tx Tx Tx Tx Tx Tx Tx
Tx Tx Tx Tx Tx Tx Tx Tx Tx Tx
Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx
Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx
100GBASE-SR10, 2x12-fiber MTPs
100GBASE-SR10, 24-fiber MTP
NOTE: Per IEEE802.3ba
40GBASE-SR4, 8-fiber MTP
MTP® LANE ASSIGNMENTS FOR 40/100G COLOR-CODED BOOTS ON MTP
Red - 24 Fiber
Aqua - 12 Fiber
Gray - 8 Fiber
PRE-TERMINATED CABLE ASSEMBLIES
B48
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
LC-LC MTP®-LC
PRE-TERMINATED TRUNK CABLES
• Plug-n-play fiber eliminates the need for field terminations or splices
• Up to 70% faster install than field-terminated trunks
• All orders customized for length, staggering, connector type, breakout style, fiber count, and labeling
• Discrete connectors are heat cured and use ceramic ferrules and sleeves for optimal performance
• Optional pulling eye protects connectors and eases installation
• Available in LC, SC, ST, MU, and MTP
• MTP polarity options are TIA methods A, B, or C
• Industry-best turnaround time on delivery
• 100% factory tested, with test results included for each assembly
• All assemblies labeled with serial number and length for traceability and easy re-order
PRE-TERMINATED TRUNK CABLES, STANDARD EXAMPLE PART NUMBERS
DESCRIPTION PART NO.
OM3, plenum, 24-fiber LC-LC, 50 feet, pulling eye, Method C FT-EB024CC050F36C36CY-NNBS
OM3, plenum, 24-fiber MTP-MTP, 50 feet, pulling eye, Method B FT-EB024SS050F36C36CY-NNCS
OM4, plenum, 24-fiber LC-LC, 50 feet, pulling eye, Method C FT-FB024CC050F36C36CY-NNBS
OM4, plenum, 24-fiber MTP-MTP, 50 feet, pulling eye, Method B FT-FB024SS050F36C36CY-NNCS
OM3, plenum, 48-fiber LC-LC, 100 feet, pulling eye, Method C FT-EB048CC100F36C36CY-NNBS
OM3, plenum, 48-fiber MTP-MTP, 100 feet, pulling eye, Method B FT-EB048SS100F36C36CY-NNCS
OM4, plenum, 48-fiber LC-LC, 100 feet, pulling eye, Method C FT-FB048CC100F36C36CY-NNBS
OM4, plenum, 48-fiber MTP-MTP, 100 feet, pulling eye, Method B FT-FB048SS100F36C36CY-NNCS
Make to order! PRE-TERMINATED TRUNK CABLE OPTIONS
FIBER
TYPE CABLE TYPE FIBER
COUNT
TERMINATION
(FIRST END)
TERMINATION
(SECOND END)
CABLE
LENGTH
(FEET)
BREAKOUT
LENGTH
(INCHES)
BREAKOUT-LEG TYPE
FIRST- & SECOND-END
TERMINATION
POLARITY LABELING
• OM1
• OM2
• OM3
• OM4
(aqua)
• OM4
(violet)
• OM4+
• OS2
• Riser I/O Dry Loose Tube
• Plenum I/O Dry
Loose Tube (standard)
• Plenum Armor I/O
Dry Loose Tube
• Riser Distribution
• Plenum Distribution
• LSZH I/O Dry Loose Tube
• MDP Plenum
• MDP Plenum Armor
• 4
• 6
• 12
• 24
• 36
• 48
• 72
• 96
• 144
• LC (duplex clips)
• LC/APC
• LC (uniboot)
• SC
• SC/APC
• ST
• MU
• MTP (female)
• MTP (male)
• LC (duplex clips)
• LC/APC
• LC (uniboot)
• SC
• SC/APC
• ST
• MU
• MTP (female)
• MTP (male)
• Pigtail
• 1-999 • 12-99
(36" is
typical)
FIRST END
• 900 µm buffered fiber
(for SC, ST, LC, MU)
• 2 mm jacketed fiber
(for LC, SC, MU)
• 3 mm jacketed fiber
(for SC, ST, LC, MTP)
SECOND END
• 900 µm buffered fiber
(for LC, SC, ST, MU)
• 2 mm jacketed fiber
(for LC, SC, MU)
• 3 mm jacketed fiber
(for LC, SC, ST, MTP)
• MTP Method A
• MTP Method B
• MTP Method C
• A-A
• A-B
• Standard
• Custom
For assistance customizing your trunk cables, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
ASSEMBLIES & PATCH CORDS | Pre-Terminated Trunk Cables > Standard
LC Fiber Trunk
PRE-TERMINATED CABLE
B49 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
& PATCH CORDS | Pre-Terminated Trunk Cables > Secure Keyed LC
Secure Keyed LC to Secure Keyed LC
12-fiber, 50/125 µm
PRE-TERMINATED SECURE KEYED LC TRUNK CABLES
• Uniboot design prevents unauthorized and inadvertent moves, adds, and changes (MACs)
• Duplex LC connectors can only be removed with matching-color extraction tool
• Choose from eight colors to segregate and secure networks
• Duplex LC connectors plug into any industry-compliant LC adapter or interface
• Standard polarity: A-B or MTP® Method C; others available
• Standard breakout lengths can be staggered for better cable routing and management
• Trunks over 125' long are shipped on spools, or upon request for shorter lengths
• Pulling eye option available
Make to order! SECURE KEYED LC FIBER TRUNK CABLE OPTIONS
KEYED
COLOR
FIBER
TYPE CABLE TYPE FIBER
COUNT TERMINATION
CABLE
LENGTH
(FEET)
1ST & 2ND
BREAKOUT
(INCHES)
BREAKOUT LEG POLARITY LABELING
• White
• Yellow
• Orange
• Red
• Blue
• Green
• Slate
• Black
• OM1
• OM2
• OM3
• OM4
(aqua)
• OM4
(violet)
• OS2
• Riser I/O Dry
Loose Tube
• Plenum I/O Dry
Loose
Tube (standard)
• Plenum Armor
I/O Dry
Loose Tube
• Riser Distribution
• Plenum
Distribution
• 4
• 6
• 12
• 24
• 36
• 48
• 72
• 96
• 144
FIRST END
• Secure Keyed
LC Duplex (uniboot)
SECOND END
• LC (duplex clip)
• LC/APC
• LC Duplex (uniboot)
• SC (duplex clip)
• SC/APC
• ST
• MU
• Secured Keyed LC
• MTP (female)
• MTP (male)
• Pigtail
• 001-999 • 12-99
(36" is typical)
• 900 µm buffered fiber
• 2 mm jacketed fiber
• 3 mm jacketed fiber
• MTP Method A
• MTP Method B
• MTP Method C
• Standard
• Custom
For assistance customizing your trunk cables, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
PRE-TERMINATED CABLE ASSEMBLIES
B50
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
The Industry’s Best Service & Support
JIM MARTIN, RCDD
Network Solutions Regional Sales Manager
Jim has played a significant role in advancing the completion of key projects
throughout the United States. A veteran in the industry, he has built
strong, trusted relationships with customers, contractors, distributors, and
manufacturers across the upper Midwest. Jim continuously leverages his
expertise to provide comprehensive service and support throughout all phases
of the sales and channel management cycle.
OPT-X UNITY 40/100G MTP ARRAY HARNESSES
• Pre-terminated MTP to MTP connectors in laser-optimized multimode
• Custom short-length cable for cabinet/rack patching
• Custom staggering available
• MTP polarity options are TIA method A, B, or C (Method B is standard)
• Used in conjunction with MTP brackets (Zero-U) or adapter plates
• 100% factory tested, with test results included for each assembly
• All assemblies labeled with serial number and length for traceability and easy re-order
• For use in attaching directly to 40/100G transceivers
• Used in 12- or 24-fiber cabling systems
• Color-coded boots
Make to order! OPT-X UNITY 40/100G MTP ARRAY HARNESS OPTIONS
FIBER TYPE CABLE TYPE FIBER COUNT TERMINATION CABLE LENGTH (FEET) BREAKOUT LENGTH
(INCHES) POLARITY
• OM3
• OM4
(aqua)
• OM4
(violet)
• Harness • 24 FIRST END
• 24 F MTP (male)
• 24 F MTP (female)
• Premium 12 F MTP (male)
• Premium 12 F MTP (female)
SECOND END
• Premium 12 F MTP (male)
• Premium 12 F MTP (female)
• Premium 8 F MTP (female)
• Premium 8 F MTP (male)
• 3
• 5
• 6
• 8
• Other
• 0-48
• Other
• MTP Method A
• MTP Method B (standard)
• MTP Method C
For assistance customizing your harnesses, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
2x12-fiber MTP to 3x8-Fiber MTPs
50/125 µm LOMM
24-fiber MTP to 3x8-Fiber MTP
50/125 µm LOMM
24-fiber MTP to 2x12-Fiber MTP
50/125 µm LOMM
& PATCH CORDS | MTP® Array Harnesses > Opt-X® Unity 40/100G
40GBASE-SR4, 8-fiber MTP
100GBASE-SR10, 2x12-fiber MTPs
Tx Tx Tx Tx Tx Tx Tx Tx Tx Tx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx
Tx Tx Tx Tx Rx Rx Rx Rx
100GBASE-SR10, 24-fiber MTP
Tx Tx Tx Tx Tx Tx Tx Tx Tx Tx
Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx
NOTE: Per IEEE802.3ba
PRE-TERMINATED CABLE ASSEMBLIES
B51 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
PRE-TERMINATED CABLE ASSEMBLIES & PATCH CORDS | Harnesses
MTP®-LC, LOMM MTP-SC, SM
HARNESSES
• Pre-terminated MTP to discrete connectors (LC, SC, ST, MU) in all fiber types
• Custom short-length cable reduces congestion in cabinet/rack patching applications
• Custom staggering available
• Straight polarity configuration
• Used in conjunction with MTP brackets (Zero-U) or Flush-Mount Series MTP 1RU panels as plug-n-play solution
• Used as direct connect into SAN equipment
• 100% factory tested, with test results included for each assembly
• All assemblies labeled with serial number and length for traceability and easy re-order
• Small diameter cable for dense connectivity
• Available in 50 µm OM3 and OM4 multimode fiber
• Uses bend-insensitive fiber; lowers risk for pinched cables
• Available with optional reversing polarity LC Uniboot
• SFP+ conversion cassettes available in e2XHD and Opt-X footprints
Make to order! HARNESS OPTIONS
FIBER TYPE CABLE TYPE FIBER COUNT TERMINATION CABLE LENGTH (FEET) BREAKOUT LENGTH
(INCHES) POLARITY
• OM1
• OM2
• OM3
• OM4
(aqua)
• OM4
(violet)
• OS2
• Harness • 8
• 12
• 24
FIRST END
• 12 F MTP (female)
• 12 F MTP (male)
SECOND END
• LC
• LC (uniboot)
• SC
• ST
• MU
• 3
• 5
• 6
• 8
• Other
• 0-48
• Other
• A - A
• A - B
For assistance customizing your harnesses, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
MTP-SC, LOMM
The Opt-X Unity Conversion Harnesses connect to electronics with LC-style ports and
aggregate 10G ports to a 40G or 100G port. Available in 50 m OM3 and OM4 multimode fiber
with optional reversing polarity LC Uniboot, Conversion Harnesses feature a small diameter
cable for dense connectivity and bend-insensitive fiber to lower risk of pinched cables.
Conversion cassettes are also available in an e2XHD footprint. More information on page B44.
SPOTLIGHT Conversion Harnesses
New
B52
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
CABLE
ASSEMBLIES & PATCH CORDS |
Harnesses > Secure Keyed LC MTP®
Secure Keyed MTP-LC Harness
SECURE KEYED LC HARNESSES
• Uniboot design prevents unauthorized and inadvertent moves, adds, and changes (MACs)
• Duplex LC connectors can only be removed with matching-color extraction tool
• Choose from eight colors to segregate and secure networks
• Duplex LC connectors plug into any industry-compliant LC adapter or interface
• Polarity is A to A
• Harnesses are part of the Leviton Make-to-Order (MTO) program
Make to order! SECURE KEYED LC MTP-LC HARNESS OPTIONS
KEYED COLOR FIBER TYPE CABLE TYPE FIBER COUNT TERMINATION CABLE LENGTH (FEET) 1ST & 2ND
BREAKOUT (INCHES)
• White
• Yellow
• Orange
• Red
• Blue
• Green
• Slate
• Black
• OS2
• OM2
• OM1
• OM3
• OM4 (aqua)
• OM4 (violet)
• Harness • 12
• 24
FIRST END
• MTP (female) (standard)
• MTP (male)
SECOND END
• Secure Keyed LC Duplex (uni-body)
• 3
• 5
• 6
• 8
• Other
• 0-48
For assistance customizing your harnesses, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
PRE-TERMINATED
B53 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
12-fiber MTP Array Patch Cord
(OM4 Violet Color Option)
ASSEMBLIES & PATCH CORDS | Opt-X® Unity 40/100G Array Cords
24-fiber MTP® Array Patch Cord
OPT-X UNITY 40/100G MTP ARRAY CORDS
• 50/125 µm laser-optimized multimode, OM3 and OM4
• 8-, 12-, and 24-fiber MTP array cords oer migration path from 10G to 40/100G
• Available in lengths of 1, 2, 3, 5, and 10 meters
• See page B6 for Opt-X Unity 40/100G system overview
OPT-X UNITY 40/100G MTP ARRAY CORDS, POPULAR CONFIGURATIONS
DESCRIPTION PART NO.
MTP (female) to MTP (female), 8 fiber, Method B, OM3, 3 meters 5L8MM-B03M
MTP (female) to MTP (female), 8 fiber, Method B, OM4, 3 meters 548MM-B03M
MTP (female) to MTP (female), 8 fiber, Method A, OM3, 3 meters 5L8MM-A03M
MTP (female) to MTP (female), 8 fiber, Method A, OM4, 3 meters 548MM-A03M
MTP (female) to MTP (female), 12 fiber, Method B, OM3, 3 meters 5L2LL-B03M
MTP (female) to MTP (female), 12 fiber, Method B, OM4, 3 meters 542LL-B03M
MTP (female) to MTP (female), 12 fiber, Method A, OM3, 3 meters 5L2LL-A03M
MTP (female) to MTP (female), 12 fiber, Method A, OM4, 3 meters 542LL-A03M
MTP (female) to MTP (female), 24 fiber, Method B, OM3, 3 meters 5L4JJ-B03M
Make to order! OPT-X UNITY MTP ARRAY CORDS
FIBER TYPE FIBER COUNT TERMINATION CABLE LENGTH (FEET) POLARITY
• OM3
• OM4 (aqua)
• OM4 (violet)
• 8
• 12
• 24
FIRST END
• 8-fiber MTP (male)
• 8-fiber MTP (female)
• 12-fiber MTP (male)
• 12-fiber MTP (female)
• 24-fiber MTP (male)
• 24-fiber MTP (female)
SECOND END
• 8-fiber MTP (male)
• 8-fiber MTP (female)
• 12-fiber MTP (male)
• 12-fiber MTP (female)
• 24-fiber MTP (male)
• 24-fiber MTP (female)
• Custom lengths in feet and meters • MTP Method A
• MTP Method B
• MTP Method C
For assistance customizing your array cords, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
12-fiber MTP Array Patch Cord 8-fiber MTP Array Patch Cord
PRE-TERMINATED CABLE
New
B54
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
CABLE ASSEMBLIES & PATCH CORDS | Premium Patch Cords & Pigtails
LC-LC Duplex
62.5/125 µm MM
LC-LC Duplex
50/125 µm MM
LC-SC Duplex
50/125 µm LOMM
ST-SC Duplex
62.5/125 µm LOMM
PREMIUM PATCH CORDS
• Available in standard SC, ST, LC, or hybrid options
• Riser, plenum, and Low-Smoke Zero-Halogen (LSZH) cable
• < 0.25 dB insertion loss maximum, > 25 dB back reflection for multimode
• < 0.25 dB insertion loss maximum, > 55 dB (UPC)/-65 dB (APC) for single mode
• Polarity reversal LC connector option
• 100% factory tested
• TIA color-coded connectors
• Quick-turnaround delivery available
Make to order! PREMIUM FIBER OPTIC PATCH CORD & PIGTAIL OPTIONS
CORE STYLE/POLISH TYPE CABLE TYPE CONNECTOR COMBINATIONS CABLE LENGTH (FEET)
MULTIMODE CORE
• 62.5/125 µm (OM1)
• 50/125 µm (OM2)
• 50/125 µm laser optimized (10G-300 m) (OM3)
• 50/125 µm laser optimized (10G-550 m) (OM4)
SINGLE-MODE CORE
• UPC Polish (ultra physical contact)
• APC Polish (angle physical contact)
• Simplex (riser)
• Duplex (riser)
• Simplex (plenum)
• Duplex (plenum)
• Simplex (LSZH)
• Duplex (LSZH)
• Pigtail
• LC to LC
• SC to SC
• ST to ST
• Reverse Polarity Uniboot
• Pigtail
• 1-999
For assistance customizing your patch cords and pigtails, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
LC-LC Duplex
50/125 µm MM
(OM4 Violet Color Option)
LC-LC Duplex Uniboot
50/125 µm MM
LC Uniboot Polarity Reversal connector includes a finger-latch release that eliminates the
need for tools when making the polarity change. It is color-coded and labeled “A” and “B” to
provide visual references when making a polarity flip. The uniboot design is compatible with
FOCIS-compliant duplex connectors and transceivers using the LC interface. The uniboot is
available on 2.0 mm round cable, and will also support legacy applications using 2.9 mm cable.
PRE-TERMINATED
SPOTLIGHT LC Uniboot Polarity Reversal
New New
New
B55 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
CABLE ASSEMBLIES & PATCH CORDS | Economy Patch Cords
ECONOMY MULTIMODE PATCH CORDS
• Available in duplex configurations and lengths
• Industry-standard connector options
• Industry-standard test requirements
• < 0.3 dB insertion loss maximum, > 25 dB back reflection
• 100% factory tested
• Many fiber options: OM1, OM2, OM3, and 0M4
• All cables are pre-labeled and individually bagged
• Quick-turnaround delivery available
62.5/125 μM MULTIMODE (OM1) OFNR DUPLEX
DESCRIPTION LENGTH (METERS) DUPLEX
LC-LC 1 62DLC-M01
LC-LC 2 62DLC-M02
LC-LC 3 62DLC-M03
LC-LC 5 62DLC-M05
LC-LC 10 62DLC-M10
SC-LC 1 62DCL-M01
SC-LC 2 62DCL-M02
SC-LC 3 62DCL-M03
SC-LC 5 62DCL-M05
SC-LC 10 62DCL-M10
SC-SC 1 62DSC-M01
SC-SC 2 62DSC-M02
SC-SC 3 62DSC-M03
SC-SC 5 62DSC-M05
SC-SC 10 62DSC-M10
SC-ST 1 62DCT-M01
SC-ST 2 62DCT-M02
SC-ST 3 62DCT-M03
SC-ST 5 62DCT-M05
SC-ST 10 62DCT-M10
ST-ST 1 62DST-M01
ST-ST 2 62DST-M02
ST-ST 3 62DST-M03
ST-ST 5 62DST-M05
ST-ST 10 62DST-M10
LC-LC Duplex
62.5/125 µm MM
50/125 μM MULTIMODE (OM2) OFNR DUPLEX
DESCRIPTION LENGTH (METERS) DUPLEX
LC-LC 1 50DLC-M01
LC-LC 2 50DLC-M02
LC-LC 3 50DLC-M03
LC-LC 5 50DLC-M05
LC-LC 10 50DLC-M10
SC-LC 1 50DCL-M01
SC-LC 2 50DCL-M02
SC-LC 3 50DCL-M03
SC-LC 5 50DCL-M05
SC-LC 10 50DCL-M10
SC-SC 1 50DSC-M01
SC-SC 2 50DSC-M02
SC-SC 3 50DSC-M03
SC-SC 5 50DSC-M05
SC-SC 10 50DSC-M10
ST-ST 1 50DST-M01
ST-ST 2 50DST-M02
ST-ST 3 50DST-M03
ST-ST 5 50DST-M05
ST-ST 10 50DST-M10
50/125 μM LOMM (OM3) OFNR DUPLEX
LC-LC 1 5LDLC-M01
LC-LC 2 5LDLC-M02
LC-LC 3 5LDLC-M03
LC-LC 5 5LDLC-M05
LC-LC 10 5LDLC-M10
SC-LC 1 5LDCL-M01
SC-LC 2 5LDCL-M02
SC-LC 3 5LDCL-M03
SC-LC 5 5LDCL-M05
SC-LC 10 5LDCL-M10
SC-SC 1 5LDSC-M01
SC-SC 2 5LDSC-M02
SC-SC 3 5LDSC-M03
SC-SC 5 5LDSC-M05
SC-SC 10 5LDSC-M10
50/125 μM LOMM (OM4) OFNR DUPLEX
LC-LC 1 54DLC-M01
LC-LC 3 54DLC-M03
LC-LC 5 54DLC-M05
LC-LC 10 54DLC-M10
SC-LC 1 54DCL-M01
SC-LC 3 54DCL-M03
SC-LC 5 54DCL-M05
SC-LC 10 54DCL-M10
PRE-TERMINATED
B56
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
CABLE ASSEMBLIES & PATCH CORDS | Economy Patch Cords & Pigtails
APC SC-SC Simplex SM
UPC LC-SC Duplex SMUPC SC-SC Duplex SM
ECONOMY SINGLE-MODE PATCH CORDS
• Available in standard LC, SC, ST, or hybrid options
• Riser-rated duplex zip-cord single-mode cable
• UPC or APC polish-style connectors
• < 0.3 dB insertion loss, -55 dB (UPC) / -65 dB (APC)
back reflection
• Low-Smoke Zero-Halogen (LSZH) OS2 available
by special order
9/125 μM SINGLE-MODE PATCH CORDS (OS1)
DESCRIPTION DUPLEX
LC-LC UPDLC-S**
SC-LC UPDCL-S**
SC-SC UPDSC-S**
SC-ST UPDCT-S**
ST-ST UPDST-S**
** = Length in meters. (01), (02), (03), (05), (10)
APC SINGLE-MODE PATCH CORDS (OS2)
DESCRIPTION LENGTH (METERS) SIMPLEX
SC-SC 1 APSSC-S01
SC-SC 2 APSSC-S02
SC-SC 3 APSSC-S03
SC-SC 5 APSSC-S05
SC-SC 10 APSSC-S10
ECONOMY PIGTAILS
• Available in LC, SC, or ST connector styles
• Multimode, laser-optimized multimode,
or single-mode fiber types
• 900 µm buered fiber cable in 3-meter length, color white
• Application use: fusion or mechanical splicing
• 12-fiber color-coded pigtail kit, colors per ANSI/TIA-598-C
MULTIMODE PIGTAIL - SIMPLEX (3 METERS)
DESCRIPTION PART NO.
LC 62.5/125 µm, OM1 62PLC-M03
SC 62.5/125 µm, OM1 62PSC-M03
ST 62.5/125 µm, OM1 62PST-M03
LC 50/125 µm, OM2 50PLC-M03
SC 50/125 µm, OM2 50PSC-M03
ST 50/125 µm, OM2 50PST-M03
LC 50/125 µm, LOMM, OM3 5LPLC-M03
SC 50/125 µm, LOMM, OM3 5LPSC-M03
ST 50/125 µm, LOMM, OM3 5LPST-M03
LC 50/125, LOMM, OM4 54PLC-M03
12-FIBER INDIVIDUAL COLOR-CODED
PIGTAIL KITS (3 METERS)
LC 62.5/125 m, OM1 62PLC-KIT
LC 50/125 m, OM2 50PLC-KIT
LC 50/125 m LOMM, OM3 5LPLC-KIT
LC 50/125 m LOMM, OM4 54PLC-KIT
SC 62.5/125 m, OM1 62PSC-KIT
SC 50/125 m, OM2 50PSC-KIT
SC 50/125 m LOMM, OM3 5LPSC-KIT
ST 62.5/125 m, OM1 62PST-KIT
ST 50/125 m, OM2 50PST-KIT
LC UPC Polish SM, OS2 UPPLC-KIT
SC UPC Polish SM, OS2 UPPSC-KIT
SINGLE-MODE PIGTAIL - SIMPLEX (3 METERS)
LC UPC polish UPPLC-S03
SC UPC polish UPPSC-S03
ST UPC polish UPPST-S03
LC APC polish APPLC-S03
SC APC polish APPSC-S03
Contact inside sales at 800.722.2082 for
6-fiber pigtail kits, other configurations,
or custom lengths.
PRE-TERMINATED
B57 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
ASSEMBLIES & PATCH CORDS | Secure Keyed LC Patch Cords & Pigtails
SECURE KEYED LC PATCH CORDS & PIGTAILS
• Uniboot design prevents unauthorized and inadvertent moves, adds, and changes (MACs)
• Duplex LC connectors can only be removed with matching-color extraction tool
• Choose from eight colors to segregate and secure networks
• Duplex LC connector plugs into any industry-compliant LC adapter or interface
• All connectors are heat cured and use ceramic ferrules for optimal performance
• Polarity options of A to B or A to A
Make to order! SECURE KEYED LC FIBER PATCH CORD & PIGTAIL OPTIONS
KEYED COLOR FIBER TYPE CABLE TYPE / POLARITY FIBER COUNT TERMINATION CABLE LENGTH (FEET)
• White
• Yellow
• Orange
• Red
• Blue
• Green
• Slate
• Black
• OM1
• OM2
• OM3
• OM4 (aqua)
• OM4 (violet)
• OS2
• Duplex Riser-Rated A to B Polarity
• Duplex Plenum-Rated A to B Polarity
• Duplex Riser-Rated A to A Polarity
• Duplex Plenum-Rated A to A Polarity
• Pigtail Riser-Rated
• 12
• 24
FIRST END
• Keyed Duplex LC (uniboot)
SECOND END
• Keyed Duplex LC (uniboot)
• Standard LC (duplex clips)
• SC
• ST
• MU
• MT-RJ
• FC
• None
• 1-999
For assistance customizing your patch cords and pigtails, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
Secure Keyed LC to Secure Keyed LC, 50/125 µm LOMM Single-Mode Pigtail SC UPC Polish
The pulling eye protects fiber connectors on 12- through 144-fiber
trunk cables. It completely covers the breakout length, transferring
any pulling force from the assembly to the pulling eye sleeve.
Customers can specify which end to have the pulling eye installed.
Also available: a high-tensile load option that attaches to Kevlar®.
SPOTLIGHT Pulling Eye
PRE-TERMINATED CABLE
Heavy-Duty High-Tensile Load Option
Used for 125 Feet and More
B58
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
pre-terminated cable
assemblies & patch cords
FIBER
FIBE
R
FEATURED
PRODUCTS
FastCAM®
Connectors B60
Secure Keyed LC
Connectors &
Accessories B62
connectors & housings
Leviton has everything you need to properly terminate your fiber network.
FastCAM® and Fast-Cure® connectors are available in LC, SC, and ST styles.
Secure Keyed LC Field-Installable Connectors lock into any industry-compliant
adapters and prevent unauthorized moves, adds, and changes (MACs). To extend
fiber to the workstation, we also oer QuickPort® footprint fiber adapters that
fit into our standard wallplates and Multimedia Outlet System (MOS) housings.
See the Copper section for copper workstation connectivity products, including
connectors and an extensive wallplate selection.
CONNECTORS & HOUSINGS | Connectors > FastCAM®
B C
FASTCAM CONNECTORS
• Pre-polished, field-installable connectors
• Designed for data center and other applications that require fast network deployment
• Use precision zirconia ferrules
• Require no polishing or epoxy curing; provide immediate termination
• Precision mechanical termination uses molded v-groove technology
to retain and align the fiber
• Terminated on 250 µm or 900 µm buered fiber and/or 2 or 3 mm
jacketed fiber
• Available in multimode, laser-optimized multimode,
and single-mode connector styles
• Higher yields with Visual Fault Locator (VFL) compatible LC, SC, and ST connectors
FASTCAM CONNECTORS – 1 PER BAG
DESCRIPTION OS2
SINGLE-MODE
OM1
MULTIMODE
OM2
MULTIMODE
OM3 & OM4
LO MULTIMODE
[A] LC FastCAM Connector 49991-SLC (blue) 49991-MLC (beige) 49991-5LC (black) 49991-LLC (aqua)
[B] SC FastCAM Connector 49991-SSC (blue) 49991-MSC (beige) 49991-5SC (black) 49991-LSC (aqua)
[C] ST FastCAM Connector 49991-SST (blue) 49991-MST (beige) 49991-5ST (black) —
FASTCAM ACCESSORIES
FastCAM LC Duplex Clips^ 49991-CLP 49991-CLP 49991-CLP 49991-CLP
^ = Minimum order quantity and lead times may apply.
See pages B69-B72 for FastCAM tools and consumables.
A
SPOTLIGHT Visual Fault Locator (VFL)
FastCAM
components
The Leviton Visual Fault Locator (VFL) uses a bright red laser to
locate faults in optical fiber, such as bends, breaks, and defective
connectors. Included with each VFL are a 2.5 mm ferrule interface,
1.25 mm adapter, and soft carrying case. Use with LC, SC, and ST
FastCAM connectors.
B60
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
connectors
& housings
FIBER
FAST-CURE CONNECTORS
• Anaerobic adhesive-style, field-installable connectors
• Hand polishing required
• Most robust connection, ideal for inside and outside plant applications
• Available in LC, SC, and ST connector styles
• Available in LOMM, multimode, and single-mode versions
• 900 µm and 3-mm boots included with SC and ST connectors
FAST-CURE ADHESIVE CONNECTORS
DESCRIPTION OS2
SINGLE-MODE
OM1 & OM2
MULTIMODE
OM3 & OM4
LO MULTIMODE
[A] LC Fast-Cure Connector with 2 and 3 mm boot 49990-SL2 (blue) 49990-ML2 (beige) 49990-LL2 (aqua)
[B] LC Fast-Cure Connector with 900 µm boot 49990-SDL (blue) 49990-MDL (beige) 49990-LDL (aqua)
[C] SC Fast-Cure Connector 49990-SSC (blue) 49990-MSC (beige) 49990-LSC (aqua)
[D] ST Fast-Cure Connector 49990-SST 49990-MST —
FAST-CURE ACCESSORIES
[E] LC Duplex Clip for Fast-Cure Connector, beige (bag of 25) — 49886-DLM 49886-DLM
[F] LC Duplex Clip for Fast-Cure Connector, blue (bag of 25) 49886-DLS — —
[G] SC Duplex Clip for Fast-Cure Connector, black (bag of 25) 49886-DSC 49886-DSC 49886-DSC
See pages B69-B72 for Fast-Cure tools and consumables.
C
A B
D E-G
CONNECTORS & HOUSINGS | Connectors > Fast-Cure®
Fiber optic ferrules, which ensure accurate alignment of fiber-to-fiber core interfaces, can
be constructed of zirconia ceramic or polymer composites. While the two materials offer
comparable performance in several areas, ceramic ferrules are superior in the key attributes
of reliability (withstanding day-to-day environmental stressors) and durability (withstanding
repeated matings/MACs). Leviton builds its connectors using only ceramic ferrules, so our
customers can be assured of the best fiber connector performance in any application.
Fast-Cure
Components
SPOTLIGHT Ceramic vs. Polymer Ferrules
B61 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
connectors
& housings
FIBER
The Leviton Secure Keyed LC Fiber System prevents unauthorized and inadvertent changes in highly sensitive applications
such as government and military networks, data centers and colocation equipment rooms, and financial, academic,
and health care market sectors. Once connected to a port, the locking design – built into the body of each duplex LC
connector – prevents removal by hand, and the connector can only be removed with a matching-color extraction tool.
SECURE KEYED LC CONNECTORS & SYSTEM ACCESSORIES
• Field-installable duplex LC connectors lock into any
industry-compliant LC adapter or interface
• Anaerobic adhesive-style, requires hand polishing
(see page B70 for Polishing Tool Kit 49800-FTK)
• Connectors can only be removed with matching-color extraction tool
• Extraction tools allow for easy connector removal from
adapter plates and wallplates
• 900 μm boots identify fiber type
• Port protection plugs enable unused LC ports to be locked
• Dust caps protect connectors upon removal from a port,
promoting good fiber discipline
Field-Installable Duplex
LC Connector Components
SECURE KEYED LC FIELD-INSTALLABLE CONNECTORS
DESCRIPTION PART NO.
[A] Secure Keyed LC Field-Installable Connector,
900 µm, MM/SM (boot sold separately) 4999K-xLC
[B] 900 µm Boots (bag of 50) 4999K-***
SECURE KEYED LC ACCESSORIES
[C] Port Protection Plug w/ Dust Cap PPRTN-xLG
[D] Extraction Tool w/ Dust Cap ETRTN-xTL
Dust Caps (bag of 10) DUSTK-CAP
x = colors: Choose from any of the colors below.
CONNECTORS & HOUSINGS | Connectors > Secure Keyed LC
CDA
*** = Beige (BGE), Black (BLK), Aqua (AQU), Blue (BLU)
White (W) Slate (G) Black (E)
Yellow (Y) Orange (O) Green (V)Red (R) Blue (L)
Boots sold separately B
Secure Keyed LC system also includes
trunk cables (B50), harnesses (B53),
patch cords and pigtails (B58).
SECURED KEYED LC ASSEMBLY VIDEO
Watch the training video at
leviton.com/videos: “How to
Assemble Leviton's Secure Keyed
LC Connector Housing.”
B62
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
connectors
& housings
FIBER
CONNECTORS & HOUSINGS | Fan-Out Kits
A
Stack multiple Fiber Optic Fan-Out Kits inside a fiber enclosure to save space. Available in two lengths, these 6- or
12-fiber kits separate 250 µm fibers and route them into color-coded 900 µm buer tubes. The easy-to-use kits
work with any manufacturer’s loose-tube cabling and any industry-standard connectors.
FIBER OPTIC FAN-OUT KITS
• Protect bare fiber and prepare loose-tube cable for direct termination to industry-standard connectors
• Separate 250 m fibers and route into color-coded 900 m buer tubes with no proprietary tools
• Available in 6- or 12-strand kits and 24" or 36" lengths
• Works with cabling from any manufacturer (will accommodate buer-tube diameter up to 3.5 mm max)
FIBER OPTIC FAN-OUT KITS
DESCRIPTION PART NO.
[A] 24" Fiber Optic Fan-Out Kit, 6 fiber 49887-06S
24" Fiber Optic Fan-Out Kit, 12 fiber 49887-12S
36" Fiber Optic Fan-Out Kit, 6 fiber 49887-06L
36" Fiber Optic Fan-Out Kit, 12 fiber 49887-12L
Fan-Out Consumables Kit 49800-FAN
FAN-OUT KIT TERMINATION VIDEO
To learn more, watch a termination
demonstration at leviton.com/videos.
B63 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
connectors
& housings
FIBER
QUICKPORT FIBER ADAPTERS
• Snap into all QuickPort openings and Multimedia Outlet System (MOS) housings
• Tool-free plug-n-play installation
• Oered with precision phosphor bronze or zirconia ceramic alignment sleeve
QUICKPORT FIBER ADAPTERS^
DESCRIPTION PART NO.
[A] QuickPort Duplex LC Adapter, MM, phosphor bronze sleeve, beige 41085-ML°
[B] QuickPort Duplex LC Adapter, 10G LOMM, zirconia ceramic sleeve, aqua 41085-LL˚
[C] QuickPort Duplex LC Adapter, SM, zirconia ceramic sleeve, blue 41085-SL˚
[D] QuickPort Simplex SC Adapter, MM, phosphor bronze sleeve, female front/back 41085-M*C
QuickPort Simplex SC Adapter, SM, zirconia ceramic, female front/back 41085-S*C
[E] QuickPort ST Fiber Optic Adapter, MM, phosphor bronze sleeve 41084-S*F
QuickPort ST Fiber Optic Adapter, SM, zirconia ceramic sleeve 41084-S*Z
[F] MTP® QuickPort Adapter, SM/MM 41085-TP*
^ = Minimum order quantity and lead times may apply. Some adapters are Make-to-Order, contact Inside Sales at 800.824.3005 for ordering information.
* = Colors: Choose from any of the colors below. ° = Colors: Choose from any of the colors below.
CONNECTORS & HOUSINGS | QuickPort® Adapters
QuickPort adapters are designed to fit our complete line
of QuickPort wallplates found on pages A48-A54.
White (W) Ivory (I) Slate (G) Black (E)
SPOTLIGHT QuickPort Wallplates
White (W) Slate (G) Black (E)Yellow (Y) Orange (O) Green (V)Red (R) Blue (L)Ivory (I)
B64
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
connectors
& housings
FIBER
B
C
E
D
A
F
The innovative Multimedia Outlet System (MOS) consists of a surface-mount box and single- and dual-gang wallplates
that accept a wide variety of fiber, copper, and A/V connectors. The single-gang wallplate and surface-mount box
accepts up to six connectors; dual-gang accepts up to twelve.
FIBER INSERTS FEATURES
• Modules are available in 0.5, 1, 1.5, 2, and 3-unit-high sizes
• Surface-mount box accepts only 1-unit-high modules
• Plates accept 3 units high total
• Available in standard QuickPort® footprint as well
as more specialized modules
• Snap-in installation into wallplates and surface-mount boxes
• Front-load installation simplifies moves, adds, and changes (MACs)
• Angled geometry protects cabling
MOS SURFACE-MOUNT BOX AND WALLPLATE HOUSINGS
DESCRIPTION WHITE LT. ALMOND IVORY GREY BLACK
[A] Single-Gang Wallplate 41290-SMW 41290-SMT 41290-SMI 41290-SMG 41290-SME
[B] Dual-Gang Wallplate 41290-DMW 41290-DMT 41290-DMI 41290-DMG 41290-DME
[C] Surface-Mount Box 41296-MMW 41296-MMT 41296-MMI 41296-MMG 41296-MME
[D] Fiber Storage/Spacer Ring 41290-DRW — 41290-DRI 41290-DRG 41290-DRE
[E] Decora® Insert, holds one 1-unit-high MOS module 41649-00W — 41649-00I — —
See color swatches on page B66.
CONNECTORS & HOUSINGS | Multimedia Outlet System (MOS)
AB CDE
See pages A45-A46 for copper
and A/V MOS products.
B65 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
connectors
& housings
FIBER
MOS FIBER INSERTS
DESCRIPTION WHITE IVORY GREY BLACK
[A] 1 Duplex SC, zirconia ceramic, SM/MM blue, (1 unit high) 41291-2CW 41291-2CI 41291-2CG 41291-2CE
[B] 1 Duplex SC, zirconia ceramic, SM/MM blue, 45˚ exit (1.5 units high) 41294-2CW 41294-2CI 41294-2CG 41294-2CE
[C] 1 Duplex SC, zirconia ceramic, SM/MM blue, 45˚ exit (2 units high) 41292-2CW 41292-2CI 41292-2CG 41292-2CE
[D] 2 Duplex SC, zirconia ceramic, SM/MM blue, 45˚ exit (3 units high) 41293-4CW 41293-4CI 41293-4CG 41293-4CE
1 Duplex ST, zirconia ceramic, SM, (1 unit high) 41291-ZTW 41291-ZTI 41291-ZTG 41291-ZTE
[E] 1 Duplex ST, phosphor bronze, MM, (1 unit high) 41291-2TW 41291-2TI 41291-2TG 41291-2TE
1 Duplex ST, zirconia ceramic, SM, 45˚ exit (1.5 units high) 41294-ZTW 41294-ZTI 41294-ZTG 41294-ZTE
For multimode SC adapters in beige, blue, or aqua housing, please contact inside sales at 800.722.2082.
CONNECTORS & HOUSINGS | Multimedia Outlet System (MOS)
A B C D E
Light
Almond
White Ivory Grey Black
MOS QUICKPORT® ADAPTERS & BLANK MODULES
DESCRIPTION WHITE LT. ALMOND IVORY GREY BLACK
[F] 1-Port QuickPort Module (1 unit high) 41291-1MW 41291-1MT 41291-1MI 41291-1MG 41291-1ME
[G] 2-Port QuickPort Module (1 unit high) 41291-2QW 41291-2QT 41291-2QI 41291-2QG 41291-2QE
[H] 2-Port 45˚ Exit Angled QuickPort Module
(1.5 units high) 41294-2QW 41294-2QT 41294-2QI 41294-2QG 41294-2QE
[I] Blank Module (0.5 unit high) 41295-5BW 41295-5BT 41295-5BI 41295-5BG 41295-5BE
[J] Blank Module (1 unit high) 41291-1BW 41291-1BT 41291-1BI 41291-1BG 41291-1BE
[K] Blank Module (1.5 units high) 41294-2BW 41294-2BT 41294-2BI 41294-2BG 41294-2BE
[L] Blank Module (2 units high) 41292-2BW 41292-2BT 41292-2BI 41292-2BG 41292-2BE
F G H I J K L
For LC adapters, use QuickPort modules above
and LC adapters on page B64.
B66
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
connectors
& housings
FIBER
FIBE
R
FEATURED
PRODUCTS
Visual Fault
Locator (VFL) B71
LYNX Cleaver B71
tools & consumables
Dierent termination types require unique tools. Leviton has everything you
need to terminate Fast-Cure® (adhesive polish) and FastCAM® (pre-polished)
connectors. We also oer cleaning tools for LC, SC, and MTP® connectors.
Choose from complete kits, or mix and match individual tools and a wide
variety of consumables.
TOOLS & CONSUMABLES | Featured Products
LEVITON 200X INSPECTION SCOPES
Reduce the chances of over-polishing with Leviton’s high-powered
inspection scopes. View single-mode and multimode end-face
polishes safely with our oblique viewing technology; full laser
eye protection is provided through wavelengths of 850 – 1550
nanometers (nm). Rugged metal and rubber construction stands up
to job-site abuse while oering an ergonomic grip. See page B71.
FASTCAM TERMINATION TOOLS
FastCAM terminations and fusion splicing both require precision
cleaving. Get the accuracy you need with the LYNX Cleaver. A
cleave angle of 90° +/- .5° is guaranteed; the 16-position blade
remains sharp through approximately 48,000 cleaves. Clean-up
is eliminated with the built-in waste holder. For a self-contained
workspace, mount the LYNX to the optional work tray and use
the gooseneck LED for task lighting. See page B71.
VISUAL FAULT LOCATOR (VFL)
Quickly locate optical fiber damage with the Leviton Visual Fault Locator (VFL). The
pocket-sized tool uses a bright red laser to locate faults, including tight bends, breaks,
and defective connectors. Included with each VFL are a 2.5 mm ferrule interface, 1.25 mm
adapter, and soft carrying case. Use with FastCAM
®
LC and SC connectors for enhanced
terminations. See page B71 for part numbers.
ONLINE TRAINING VIDEOS & ANIMATIONS
Increase your expertise with Leviton’s online fiber training. Animated, step-by-step
instructions on terminating FastCAM 250 m or 900 m fiber, using our fan-out
kits, or terminating Fast-Cure® connectors, are all available with just a click of
the mouse. All of Leviton’s training animations feature clear, easy-to-understand
graphics paired with on-screen written instructions for maximum eectiveness.
Visit leviton.com/support.
B68
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
tools & consumables
FIBER
A
TOOLS & CONSUMABLES | Fiber Optic Tool Kits
FIBER OPTIC LIGHT TOOL KIT
• Essential tool set for quick field-termination of Fast-Cure® connectors
• Terminates both multimode and single-mode fiber
FIBER OPTIC FAST-CURE TOOL KIT
• All the tools you need for terminating multimode or single-mode LC, SC, or ST Fast-Cure adhesive connectors
• Adhesive/accelerator kit sold separately, see page B72
FIBER OPTIC FASTCAM® TOOL KIT
• Precision cleaving for guaranteed FastCAM connector performance
• Terminates both multimode and single-mode fiber
Consumables sold separately, see page B72.
C
B69 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
tools & consumables
FIBER
B
TOOLS & CONSUMABLES | Fiber Optic Tool Kits
FIBER OPTIC TOOL KITS CONTENTS LIGHT TOOL KIT
49800-MTK
FAST-CURE®
TOOL KIT
49800-FTK
FA S TC A M ®
TOOL KIT
49800-MSK
Standard Tool Kit Carrying Case •
250 m Buer Remover •
900 m Buer Remover •••
Jacket Stripper ••
Aramid Strand Scissors ••
Safety Glasses •
Sapphire Scribe ••
2.5 mm Polishing Puck ••
3" x 6" Polishing Pad ••
ST/SC Combination Tightening Tool •
Versa-Cleave® Tool
LYNX Cleaver •
100x Inspection Scope •
200x Inspection Scope •
Piano Wire •
Lint-Free Dry Wipes ••
Alcohol Pads ••
12 m Aluminum-Oxide Lapping Film •
3 m Aluminum-Oxide Lapping Film •
0.3 m Aluminum-Oxide Lapping Film •
Crimp Tool •
LC Scope Adapter •
LC Polishing Puck •
FIBER OPTIC TOOL KITS
DESCRIPTION PART NO.
[A] Light Tool Kit 49800-MTK
[B] Fast-Cure Tool Kit 49800-FTK
[C] FastCAM Tool Kit w/ LYNX Cleaver^ 49800-MSK
FastCAM Tool Kit w/ LYNX Cleaver, work tray, and LED light^ 49800-LAK
FastCAM Tool Kit w/ CT-30A Cleaver (cleaver shown on page B71) 49800-SMK
^ = Minimum order quantity and lead times may apply.
Individual consumables available on page B72.
Note: Adhesive/accelerator tool kit sold separately. See page B72.
B70
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
tools & consumables
FIBER
A, B H
C, D
TOOLS & CONSUMABLES | Fiber Optic Tools
UNIVERSAL TOOLS & ACCESSORIES
DESCRIPTION PART NO.
[A] 250 and 900 m Buer Remover (yellow handle) 49886-BR2
[B] 900 m Buer Remover (red handle) 49886-BR9
[C] Jacket Stripper 49886-STP
[D] Aramid Strand Scissors 49886-SIS
Marking Pen 49886-SMP
Safety Glasses 49886-GLS
Sapphire Scribe 49886-SCR
1.25 mm (LC) Polishing Puck 49886-LCP
2.5 mm (SC/ST) Polishing Puck 49886-PUC
3" x 6" Polishing Pad 49886-PAD
Opt-X® Tool Kit Carrying Case 49886-CSE
Safety Pad 49886-SPD
200x Inspection Scope 49886-FSP
LC Scope Adapter (works w/ 200x scope only) 49886-LCS
Duplex LC Scope Adapter (works w/ 200x scope only) 49886-LCD
MTP® Scope Adapter (works w/ 200x scope only) 49886-MCS
Fiber Optic Crimp Tool with .128/.151/.178 hex die 49886-FCT
Tool Kit Carrying Case 49886-FCC
[E] MTP Cassette Cleaning Tool 49886-MCT
MTP Cassette Cleaning Tool Refill (male) 49886-MCR
[F] LC Connector Cleaning Tool 49886-LCT
[G] SC Connector Cleaning Tool 49886-SCT
[H] MTP Connector Cleaning Tool (female) 49886-UFT
MTP Connector Cleaning Tool (male) 49886-UMT
IJ
LM
FA STC A M ® SPECIFIC TOOLS
[I] Work Tray^ 49886-LNT
[J] Gooseneck LED^ 49886-LGN
[K] LYNX Cleaver^ 49886-LNX
[L] Fujikura CT-30A Cleaver^ 49886-CTA
[M] Visual Fault Locator (VFL)
(2.5 and 1.25 mm adapters included) 49886-VFL
Replacement 1.25 mm Adapter for VFL 49886-FLA
^ = Minimum order quantity and lead times may apply.
E
K
G
F
B71 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
tools & consumables
FIBER
TOOLS & CONSUMABLES | Consumable Products & Kits
CONSUMABLES KITS
DESCRIPTION PART NO.
[A] Universal Consumables Kit 49800-CON
[B] Fast-Cure Consumables Kit 49800-FCC
[C] Adhesive/Accelerator Kit 49800-680
[D] Fan-Out Consumables Kit 49800-FAN
CONSUMABLES
Piano Wire 49886-WRE
Lint-Free Dry Wipes (100 per pack) 49886-DWP
Alcohol Pads (100 per pack) 49886-APD
12 m Aluminum-Oxide Lapping Film, pink (100 per pack) 49886-12F
3 m Aluminum-Oxide Lapping Film, yellow (100 per pack) 49886-03F
0.3 m Aluminum-Oxide Lapping Film, light blue (100 per pack) 49886-X3F
Replacement Needles (25 per pack) 49886-FCN
Replacement Syringes (25 per pack) 49886-SYR
A B D
UNIVERSAL CONSUMABLES KIT
All the basic supplies needed to clean and polish fiber
optic connectors. Set includes:
• 50 lint-free dry wipes
• 50 alcohol pads
• 30 sheets 12 µm lapping film
• 30 sheets 3 µm lapping film
• 30 sheets 0.3 µm lapping film
• Piano wire
ADHESIVE/ACCELERATOR KIT
Set includes:
• Loctite 680 adhesive
• Loctite 7649 accelerator with syringe
• Two needles
• Will do approximately 200 terminations
FAST-CURE® CONSUMABLES KIT
Everything from the Universal Kit, plus specialized
supplies for Fast-Cure terminations. Additional
included items:
• 25 syringes
• 25 needles
• Adhesive and accelerator
• Will do approximately 200 terminations
FAN-OUT CONSUMABLES KIT
Kit terminates a minimum of 10 Fiber Optic Fan-Out Kits.
Set includes:
• 20 lint-free dry wipes
• 10 alcohol pads
• 10 D’Gel® packets
• Sealant
• Talc powder
C
B72
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
tools & consumables
FIBER
CABLE MANAGEMENT
SECTION
C
SECTION CCONTENTS
C3 Overhead Infrastructure Platform
C5 Fiber Raceway System
C13 Versi-Duct® Cable
Management System
C15 Horizontal Cable Managers
C16 Rear Cable Managers
C17 Blanks & Transitional Covers
C18 Rings & Brackets
C19 VELCRO® Brand Fasteners
C21 Zone Enclosures
C22 Wireless Access Point Enclosures
CABLE MANAGEMENT | Overhead Infrastructure Platform
INCREASED FLEXIBILITY & ACCESS IN OVERHEAD SPACES
In many data centers, access to the ceiling may be limited, or the roof structure may not allow the added weight
from cables and ladder trays. The floor-mounted Overhead Infrastructure Platform can carry the load and avoid
obstructions while freeing up rack space by adding patching above cabinets or racks.
TIME & LABOR SAVINGS
Installing overhead-suspended ladder trays from tall ceilings is cumbersome and time consuming. When ladder
trays and wiring baskets are hung from the ceiling it is necessary to “thread” the cable and trunks through ceiling
supports, requiring additional labor at the time of initial installation. Using the Overhead Infrastructure Platform can
reduce installation time by 40% in a typical installation.
FEATURES
• Works with any cabinet, cable tray, ladder, or raceway, including Leviton’s Fiber Raceway System
• Scalable for growth: allows expansion without disruption of current operations
• System accessories require no rack unit space
• Allows unobstructed access to overhead cabling
• Faster deployment, decommissioning, or replacement of server cabinets
• Reduced installation costs and fewer on-site problems
• Complies with TIA-569, cULus Listed, and meets ANSI STANDARD T1.336-2003 Tier 1 Universal Telecom Framework
• Includes industry-compliant bonding and grounding points
OVERHEAD INFRASTRUCTURE PLATFORM (CALL INSIDE SALES FOR ORDERING ASSISTANCE)
DESCRIPTION 36" WIDE 42" WIDE 48" WIDE
Overhead Infrastructure Platform, 96" H OIPFR-36A OIPFR-42A OIPFR-48A
Overhead Infrastructure Platform, 108" H OIPFR-36B OIPFR-42B OIPFR-48B
Overhead Infrastructure Platform, 120" H OIPFR-36C OIPFR-42C OIPFR-48C
OVERHEAD INFRASTRUCTURE PLATFORM
The Overhead Infrastructure Platform provides independent support
for cabling pathways, power, lighting, and other infrastructure.
Platforms can carry the load of cables and ladder trays while freeing
up rack space by adding patching above cabinets or racks. Since
cabinets and racks are not attached, power and cabling can be
quickly disconnected without removing hardware.
New
C3 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
overhead
infrastructure platform
CABLE MANAGEMENT
CABLE MANAGEMENT | Overhead Infrastructure Platform
RAPID SWAP-OUT & STAGING
Racks and cabinets are not attached to basket trays and other overhead cable management, allowing power and
cabling to be quickly disconnected from the cabinet without removing hardware. Connections within the cabinet can
be easily disconnected, making room for new equipment to be rolled in with minimal interruption.
ACCESSORIES
• Frame Drill Template – used to lay out Overhead Infrastructure Platform frame mounting locations
• Channel Attachment Bracket Kit – Left/Right brackets mount to standard steel channel framing to span the platform
• Sub-Floor Mounting Kit – plate for bottom of a raised floor tile that accepts standard threaded rod
• C-Brackets – creates a two-tier mounting surface for ladder trays or wire baskets; available in a variety of sizes
• Patch Panel Bracket – mounted on the steel channel above the cabinet and accepts standard 19" patch panels or other
fiber enclosures, providing up to 4RU of additional patching capability
OVERHEAD INFRASTRUCTURE PLATFORM ACCESSORIES (CALL INSIDE SALES FOR ORDERING ASSISTANCE)
DESCRIPTION PART NO. DESCRIPTION PART NO.
6/6" Frame Extension Mounting C-Bracket OIP06-06C 20/18" Frame Extension Mounting C-Bracket OIP20-18C
8/8" Frame Extension Mounting C-Bracket OIP08-08C 24/12" Frame Extension Mounting C-Bracket OIP24-12C
12/8" Frame Extension Mounting C-Bracket OIP12-08C 24/20" Frame Extension Mounting C-Bracket OIP24-20C
20/8" Frame Extension Mounting C-Bracket OIP20-08C 30/24" Frame Extension Mounting C-Bracket OIP30-24C
36" Frame Drill Template OIPDT-36W Channel Attachment Bracket Kit (2 included) OIPFR-CAB
42" Frame Drill Template OIPDT-42W Sub-Floor Mounting Kit (2 included) OIPAC-SFM
48" Frame Drill Template OIPDT-48W Patch Panel Bracket OIPAC-PPB
Please contact inside sales at 800.722.2082 for more information.
For assembly and floor mounting instructions, go to leviton.com/OIP.
C4
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
overhead
infrastructure platform
CABLE MANAGEMENT
CABLE MANAGEMENT | Fiber Raceway System
ADAPTS TO ANY APPLICATION
Raceway components are available in three colors (yellow is standard; orange and black are special order), four
standard sizes, and a wide variety of styles. Ducting is available solid or slotted, with or without covers; connecting
components enable drop-offs and routing around obstacles. Mounting kits allow overhead, raised-floor, and
vertical installation.
ASSEMBLES QUICKLY AND EASILY
Ducting is easily cut to size with a mitre saw, and the system installs with only a screwdriver and other simple
carpentry tools. Connection components, including vertical and horizontal outlets and hardware-free covers, snap
together tool free, saving time and money. Side drop-o kits can be added after initial installation anywhere along
the Raceway to accommodate new cable routing to racks and cabinets.
PRESERVES FIBER INTEGRITY
High-impact thermoplastic construction ensures ample protection, rigidity, and support. Ducting won’t
sag under heavy cable loads, and accidental cable damage is prevented, minimizing network downtime.
Plus, the system maintains a minimum bend radius of 30 mm at all times.
REDUCES FIRE DAMAGE
The Fiber Raceway System is UL 2024A listed for riser-rated telecommunications applications. In addition, raceway
materials carry one of UL’s highest flammability ratings, 94 V-0. They are also halogen-free and produce no corrosive
acid or toxic gas emissions in the event of fire, making them ideal for sensitive environments from hospitals and
nursing homes to telecom rooms and data centers.
FIBER RACEWAY SYSTEM
Route, protect, and store fiber cabling with the Leviton Fiber
Raceway System. The easy to design, easy to configure, easy
to install cable management system provides a dedicated path
for critical network cabling. Fiber Raceway is an ideal solution in
data centers, telecom rooms, and wiring closets – virtually any
application that requires fiber cable protection or segregation.
C5 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
fiber raceway
CABLE MANAGEMENT
CABLE MANAGEMENT | Fiber Raceway System
A-C D
DUCTING & BEND RADIUS GUIDES
• Ducting is ideal for routing and supporting cables throughout fiber networks
• 6.5-foot sections can be hand cut to fit exact specifications
• Available in four sizes with two cover types or without covers
• Slotted ducting is ideal for cable runs with varying exit locations
• Bend radius guides safely route fiber
• Available in yellow as a standard color; special order colors available in orange and black
DUCTING
DESCRIPTION 2" X 2" 4" X 4" 4" X 8" 4" X 12"
Solid Duct S2DCT-SDT S4DCT-SDT S8DCT-SDT SWDCT-SDT
[A] Solid Duct and Cover S2DCT-SDC S4DCT-SDC S8DCT-SDC SWDCT-SDC
[B] Slotted Duct S2DCT-DSL S4DCT-DSL — —
[C] Solid Duct and Hinged Cover S2DCT-DHC† S4DCT-DHC S8DCT-DHC —
Slotted Duct and Cover S2DCT-DCS S4DCT-DCS — —
Slotted Duct and Hinged Cover — S4DCT-SHC — —
BEND RADIUS GUIDES
DESCRIPTION PART NO.
[D] Radius Guide (10 pack) (fits 2" x 2" and 4" x 4" slotted ducts) SRAGD-SLT
Dimensions listed as H x W.
† = 2"x 2" hinged cover is available in eight 10" sections only.
2"x 4" and 2" x 8" ducting available by special order.
Color: Yellow is standard. Orange and Black are special order and require additional lead time.
Slotted Duct
Solid Duct & Hinged Cover
Solid Duct & Cover
Black (E)Orange (O)Yellow (S)
Please contact inside sales at 800.722.2082
to order or for more information.
Radius Guide
shown with ducting
(ducting sold separately)
C6
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
fiber raceway
CABLE MANAGEMENT
E F
IJ
CABLE MANAGEMENT | Fiber Raceway System
B
JOINERS
• Joiners create a rigid connection between ducting
sections and other components
• Standard Joiners install without tools;
Slotless Joiners install using a screwdriver
VERTICAL ELBOWS
• Connect horizontal raceway at dierent heights
and route raceway around obstacles
• Available in four sizes, three angles,
and with or without covers
• Retrofit styles allow easy addition of new fibers
VERTICAL TEES
• Drop cables vertically from horizontal routes
into frames or cabinets
• Available in four sizes with or without covers
HORIZONTAL TEES
• Branch o the duct and extend the fiber route
• Available in four sizes with or without covers
HORIZONTAL ELBOWS
• Change the direction of horizontal routes
• Available in four sizes, three angles,
and with or without covers
HORIZONTAL CROSSES
• Allow easy fiber routing in all directions
for increased expansion and adaptability
• Available in four sizes with or without covers
Leviton oers downloadable Fiber Raceway resources, including application
notes, Visio® stencils, and a training video, available at leviton.com/frs. The
application notes explain which raceway products or kits are appropriate for
specific scenarios, from under-floor mounting to ladder and strut mounting. The
video provides installation instructions and a component overview.
Design and product assistance is available via the Tech Support line at
800.824.3005 or at appeng@leviton.com.
C
H
D G
A
Please contact inside sales at 800.722.2082
to order or for more information.
SPOTLIGHT Fiber Raceway Application Notes
C7 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
fiber raceway
CABLE MANAGEMENT
CABLE MANAGEMENT | Fiber Raceway System
JOINERS
DESCRIPTION 2" X 2" 4" X 4" 4" X 8" 4" X 12"
[A] Standard Joiner S2JNR-SLT S4JNR-SLT S8JNR-SLT —
[B] Slotless Joiner — S4JNR-SLS S8JNR-SLS SWJNR-SLS
VERTICAL ELBOWS
Vertical Elbow 30º Down S2VEL-30D S4VEL-30D S8VEL-30D —
Vertical Elbow 30º Down and Cover S2VEL-3DC S4VEL-3DC S8VEL-3DC —
[C] Vertical Elbow 30º Down Retrofit — S4VEL-3DR S8VEL-3DR —
Vertical Elbow 30º Up — S4VEL-30U S8VEL-30U —
[D] Vertical Elbow 30º Up and Cover — S4VEL-3UC S8VEL-3UC —
Vertical Elbow 30 º Up Retrofit — S4VEL-3UR S8VEL-3UR —
Vertical Elbow 45º Down S2VEL-45D S4VEL-45D S8VEL-45D SWVEL-45D
Vertical Elbow 45º Down and Cover S2VEL-4DC S4VEL-4DC S8VEL-4DC SWVEL-4DC
Vertical Elbow 45º Down Retrofit — S4VEL-4DR S8VEL-4DR —
Vertical Elbow 45º Up — S4VEL-45U — SWVEL-45U
Vertical Elbow 45º Up and Cover S2VEL-4UC S4VEL-4UC S8VEL-4UC SWVEL-4UC
Vertical Elbow 45º Up Retrofit — S4VEL-4UR S8VEL-4UR —
Vertical Elbow 90º Down S2VEL-90D S4VEL-90D S8VEL-90D SWVEL-90D
[E] Vertical Elbow 90º Down and Cover S2VEL-9DC S4VEL-9DC S8VEL-9DC SWVEL-9DC
Vertical Elbow 90º Down Retrofit — S4VEL-9DR S8VEL-9DR —
Vertical Elbow 90º Up S2VEL-90U S4VEL-90U S8VEL-90U SWVEL-90U
Vertical Elbow 90º Up and Cover S2VEL-9UC S4VEL-9UC S8VEL-9UC SWVEL-9UC
Vertical Elbow 90º Up Retrofit S2VEL-9UR S4VEL-9UR S8VEL-9UR —
Vertical Elbow 90º Up and Down Enclosed — S4VEL-9UD S8VEL-9UD —
VERTICAL TEES
Vertical Tee S2VTE-TEE S4VTE-TEE S8VTE-TEE SWVTE-TEE
Vertical Tee and Cover S2VTE-TEC S4VTE-TEC S8VTE-TEC SWVTE-TEC
[F] Vertical Tee Retrofit S2VTE-TER S4VTE-TER S8VTE-TER —
HORIZONTAL TEES
Horizontal Tee S2HTE-TEE S4HTE-TEE S8HTE-TEE SWHTE-TEE
[G] Horizontal Tee and Cover S2HTE-TEC S4HTE-TEC S8HTE-TEC SWHTE-TEC
HORIZONTAL ELBOWS
Horizontal Elbow 30º S2HEL-30D S4HEL-30D S8HEL-30D —
[H] Horizontal Elbow 30º and Cover S2HEL-3DC S4HEL-3DC S8HEL-3DC —
Horizontal Elbow 45º S2HEL-45D S4HEL-45D S8HEL-45D SWHEL-45D
Horizontal Elbow 45º and Cover S2HEL-4DC S4HEL-4DC S8HEL-4DC SWHEL-4DC
Horizontal Elbow 90º S2HEL-90D S4HEL-90D S8HEL-90D —
[I] Horizontal Elbow 90º and Cover S2HEL-9DC S4HEL-9DC S8HEL-9DC SWHEL-9DC
HORIZONTAL CROSSES
[J] Horizontal Cross S2HCR-HCR S4HCR-HCR S8HCR-HCR SWHCR-HCR
Horizontal Cross and Cover S2HCR-HCC S4HCR-HCC S8HCR-HCC SWHCR-HCC
Dimensions listed as H x W.
2" x 4" and 2" x 8" components available by special order.
2" x 2" oered in yellow only.
Color: Yellow is standard. Orange and Black are special order and require additional lead time.
Black (E)
Orange (O)Yellow (S)
C8
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
fiber raceway
CABLE MANAGEMENT
CABLE MANAGEMENT | Fiber Raceway System
STORAGE LOOPS
• Organize excess patch cord lengths
• Available in two styles: inline for storing within
the duct system, and oset for outside the main duct
SIDE DROP-OFF KITS
• Provide a safe exit for fiber cords at any point along
ducting when dropping down to active equipment
or work areas
END CAPS
• Snap into place to seal the open end of standard
ducting; can easily be removed for future
system modifications
• Available in two styles: solid-walled, or with
knockouts for flexible tubing or fiber feedout
REDUCERS
• Join varying ducting sizes together
ADAPTERS
• Used to connect Leviton Fiber Raceway System
with ADC ducting
TUBING
• Manage fiber as it enters or exits equipment
rack ducting
• Flexible/ribbed design allows for adjustment
if drops cannot be positioned directly in line
with equipment
STORAGE LOOPS
DESCRIPTION 2" X 2" 4" X 4" 4" X 8"
[A] Fiber Storage Loop Inline S2FSL-INL S4FSL-INL S8FSL-INL
Fiber Storage Loop Oset — S4FSL-OFF S8FSL-OFF
SIDE DROP-OFF KITS
[B] Side Drop-O Kit (for Raceway Ducting) S2DRP-DCT S4DRP-DRP —
Side Drop-O Kit (for Round Tube) S2DRP-TUB — —
Side Drop-O Kit (for Square Tube) S2DRP-STB — —
Outlet Trumpet S2TRM-TRM S4TRM-TRM —
AB
C
End cap shown with ducting F
G, H
Tubing shown with side drop-o kit
(round tubing sold separately)
E
D
E
C9 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
fiber raceway
CABLE MANAGEMENT
CABLE MANAGEMENT | Fiber Raceway System
END CAPS
DESCRIPTION 2" X 2" 4" X 4" 4" X 8" 4" X 12"
[C] End Cap, standard — S4END-CAP S8END-CAP —
End Cap, slotless — S4END-CSL S8END-CSL SWEND-CSL
End Cap, (two) .75" diameter knockouts S2END-20D — — —
End Cap, (one) 1.5" diameter knockout S2END-38D — — —
End Cap, (one) 1.5" hole S2END-38H — — —
End Cap Tube Outlet for 2" Tube S2END-OUT — — —
[D] End Cap, (two) 1.75" diameter knockouts — S4END-46D — —
[E] End Cap, (two) 1.25" diameter knockouts — S4END-32D — —
REDUCERS
DESCRIPTION 4" X 4" 4" X 8" 4" X 12"
Reducer to 2" x 2" S4RDR-RDR — —
[F] Reducer to 2" x 2" and Cover S4RDR-RDC — —
Reducer to 4" x 4" Horizontal Cross and Cover — S8RDR-RDC —
Reducer to 4" x 4" Right Hand — S8RDR-RRH —
Reducer to 4" x 4" Right Hand and Cover — S8RDR-RHC —
Reducer to 4" x 4" Left Hand — S8RDR-RLH —
Reducer to 4" x 4" Left Hand and Cover — S8RDR-LHC —
Reducer to 4" x 8" — — SWRDR-RDR
Reducer to 4" x 8" and Cover — — SWRDR-RDC
ADAPTERS (TO MATE W/ ADC DUCTING)*
DESCRIPTION 4" X 4" 4" X 8" 4" X 12"
Adapter Kit to ADC 4" Duct S4ADP-ADC — —
Adapter Kit to ADC 4" Tee S4ADP-TEE — —
Left Hand Adapter Kit to ADC 6" Duct — S8ADP-LAD —
Right Hand Adapter Kit to ADC 6" Duct — S8ADP-RAD —
TUBING (PVC, NON UL 94V-0 MATERIAL)**
DESCRIPTION PART NO.
[G] Round, 2" diameter, 39" length (yellow) S50RT-01M
Round, 2" diameter, 78" length (yellow) S50RT-02M
Round, 1" diameter, 78" length (yellow) S25RT-02M
Square, 2", 14" length (yellow) S50ST-350
[H] Square w/ cover, 2", 14" length (yellow) S5STC-350
2" x 4" and 2" x 8" components available by special order.
2" x 2" oered in yellow only.
Color: Yellow is standard. Orange and Black are special order and require additional lead time. Contact inside sales for more information.
* = Adapters are special order and require additional lead time.
** = PVC tubing also available in Black.
Black (E)
Orange (O)Yellow (S)
Please contact inside sales at 800.722.2082
to order or for more information.
C10
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
fiber raceway
CABLE MANAGEMENT
CABLE MANAGEMENT | Fiber Raceway System
CA B
MOUNTING HARDWARE
• Extensive selection enables Fiber Raceway installation above equipment racks and frames, under flooring,
or on walls, ladder rack, or unistrut
• Other mounting hardware available – contact Tech Support at 800.824.3005 or +1.425.486.2222
MOUNTING HARDWARE
DESCRIPTION PART NO.
[A] 4" x 4" Wall-Mounting Kit S4MNT-KIT
4" x 8" Wall-Mounting Kit S8MNT-KIT
[B] 4" x 4" Wall Extension Bracket (up to 10") Mounting Kit S4EXT-KIT
4" x 8" Wall Extension Bracket (up to 14") Mounting Kit S8EXT-KIT
2" x 2" Duct-Mounting Bracket S2DMB-000
[C] 4" x 4" Duct-Mounting Bracket S4DMB-000
4" x 8" Duct-Mounting Bracket S8DMB-000
4" x 12" Duct-Mounting Bracket SWDMB-000
[D] 4" x 4" Suspension Kit (with 3.3' rod) S4SUS-KIT
4" x 8" Suspension Kit (with 3.3' rod) S8SUS-KIT
4" x 12" Suspension Kit (with 3.3' rod) SWSUS-KIT
4" x 12" Suspension Kit (without rod) SWSUS-WRD
2" x 2" Raised-Mounting Kit (for above or below cabinet, with 15" rod) S1RMK-000
[E] 4" x 4" Raised-Mounting Kit (for above or below cabinet, with 15" rod) S4RMK-000
4" x 8" Raised Mounting Kit (for above or below cabinet, with 15" rod) S8RMK-000
4" x 12" Raised-Mounting Kit (for above or below cabinet, with 15" rod) SWRMK-000
2" x 2" Ladder Rack/Unistrut Mounting Kit S1LRU-000
[F] 4" x 4" Ladder Rack/Unistrut Mounting Kit S4LRU-000
4" x 8" Ladder Rack/Unistrut Mounting Kit S8LRU-000
[G] 5/8" Threaded Rod Side-Mount Bracket (threaded rod not included) SMH00-SMB
DE GF
C11 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
fiber raceway
CABLE MANAGEMENT
The Industry’s Best Service & Support
DANELLE MCCORMICK
Senior International Inside Sales Representative
Danelle has 17 years of experience working in customer service, and is
knowledgeable in every region. She currently provides support to the Middle East
and Latin America, but at any given time Danelle could be supporting any region
when assistance is needed. During one day she could be providing quotes, managing
orders, and working with sta at Leviton’s warehouses and import/export oce.
“Providing support to customers is what I do best,” she says. “I love to be busy and I
embrace new challenges — it keeps the job exciting.”
CABLE MANAGEMENT | Fiber Raceway System
ABC
TOOLS
• Several kit options for cutting and slotting duct during installation or upgrades
• Mitre boxes provide a stable channel for cutting ducting
• Cut-out tools prepare ducting for the addition of a Side Drop-O Kit
TOOLS
DESCRIPTION PART NO.
Mitre Box (for 1.25" and 2" Ducting)* SMTRE-050
[A] Mitre Box (for 4", 8", and 12" Ducting)* SMTRE-300
[B] 2" Side Cut-Out Tool Kit (for use with 2" x 2" Side Drop-O Kits)** S2CUT-TOL
4" Side Cut-Out Tool Kit (for use with 2" x 4" and 4" x 4" Side Drop-O Kits)** S4CUT-TOL
[C] 2" End-Slot Tool (for use with 2" x 2" Joiners) SSLOT-050
4" x 8" End-Slot Tool (for use with 4" x 4" and 4" x 8" Joiners) SSLOT-200
* = Ducting and saw not included.
** = Ratchet and socket not included.
Please contact inside sales at 800.722.2082
to order or for more information.
C12
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
fiber raceway
CABLE MANAGEMENT
VERSI-DUCT CABLE MANAGEMENT SYSTEM
The unique Versi-Duct system is a versatile cable management solution for copper and fiber installations.
The innovative system fits on any standard equipment rack, and accessories enable a wide range of cable
management configurations.
VERSI-DUCT 8" CHANNEL CABLE MANAGEMENT
• Ideal for today’s large-scale deployments and CAT 6A installations with typical larger diameter cable
• 80" channel ships in two 40" pieces for easier handling and installation
• Channels available with standard or designer cover
• Channels include mounting bracket kit and two covers, one slack loop organizer,
and one cable retainer, per 80" side (front or front/rear)
• Included cover features unique integrated dual-hinge for easy accessibility
• Channels can be side or center-mounted for better space utilization
• Large finger-passthrough space aligns with rack units
• Standard black replacement covers available through inside sales
VERSI-DUCT 8" CHANNEL VERTICAL CABLE MANAGEMENT & ACCESSORIES
DESCRIPTION FRONT ONLY FRONT & REAR
Vertical 80" length, 8" W x 8" D channel, standard hinged black cover
8980L-VFO* 8980L-VFR
Vertical 80" length, 8" W x 8" D channel, designer hinged grey cover
[A] 8C80L-VFO* [B] 8C80L-VFR
Vertical Center Mounting Bracket, 8" channel (bag of 4) — 89265-BKT
Vertical Cable Retainer, 8" channel (bag of 6) — [C] 89265-WR1
Vertical Slack Loop Organizer, 8" channel (package of 2) — [D] 89265-SL1
*Rear retrofit not available.
8" VERSI-DUCT CAPACITY CHART
Use the chart below to determine maximum recommended cable capacity for 8"
Versi-Duct managers, based on average cable outside diameter. To ensure proper
bend radius and space for future additions, do not fill to capacity at initial installation.
FEATURE CHANNEL DEPTH
(WXD)
USABLE AREA
(IN2)
CAT 6A CAPACITY
(.330" CABLE)
CAT 6 CAPACITY
(.230" CABLE)
CAT 5E CAPACITY
(.185" CABLE)
8" Channel Size 7.88" x 6.9" 54.3 159 327 505
Finger Spacing 5.5" x 1" 5.5 24 50 77
Large Passthrough 4.8" x 2.6" 11.2 49 101 156
Small Passthrough 2.6" dia. 5.3 23 48 74
CABLE MANAGEMENT | Versi-Duct® Vertical Management
A
40" length shown B
40" length shown
C
D
B
80" length shown
C13 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
versi-duct
CABLE MANAGEMENT
VERSI-DUCT 5" CHANNEL VERTICAL CABLE MANAGEMENT & ACCESSORIES
DESCRIPTION FRONT ONLY FRONT
& REAR
Vertical 80" length, 5" W x 4" D channel,
standard snap-on black cover (included) 4980L-VFO†[L] 4980L-VFR
Vertical 40" length, 5" W x 4" D channel,
standard snap-on black cover (included) [A] 4940L-VFO†[B] 4940L-VFR
Vertical 40" Designer Cover, 5" channel, snap-on, grey (set of 2) — [C] 59265-5DC
Mounting Bracket, 5" channel (set of 2) — [D] 49265-BKT
Versi-Duct Slack Loop Organizer (set of 2) — 49265-SL1
Versi-Duct Slack Loop Organizer (Extended) (set of 2) — 49265-SL2
VERSI-DUCT HORIZONTAL CABLE MANAGEMENT & ACCESSORIES
Horizontal Manager, 2RU, 3" W x 3" D front, 2" W x 4" D rear*, with cover [G] 492RU-HFO [H] 492RU-HFR
Horizontal Manager, 1RU, 1.5" W x 3" D front, 1.5" W x 4" D rear*, with cover
[I] 491RU-HFO [J] 491RU-HFR
Horizontal Designer Cover, 2RU, snap-on, grey — [K] 49265-DC2
Horizontal Designer Cover, 1RU, snap-on, grey — 49265-DC1
Horizontal Cable Retainer (10 per package) — [E] 49265-WR1
Horizontal Cover Hinge (4 per package) — [F] 49265-HNG
†Rear retrofit not available. *Bend radius clips included.
5" VERSI-DUCT CAPACITY CHART
Use the chart below to determine maximum recommended cable capacity for 5"
Versi-Duct managers, based on average cable outside diameter. To ensure proper bend
radius and space for future additions, do not fill to capacity at initial installation.
FEATURE CHANNEL DEPTH
(WXD)
USABLE AREA
(IN2)
CAT 6A CAPACITY
(.330" CABLE)
CAT 6 CAPACITY
(.230" CABLE)
CAT 5E CAPACITY
(.185" CABLE)
5" Channel Size 4.75" x 3.9" 18.5 54 111 172
Finger Spacing 3" x 1" 3.0 13 27 42
Passthrough 3.5" x 1" 3.5 15 32 49
A, B
D G, HE, F
C
CABLE MANAGEMENT | Versi-Duct® Vertical & Horizontal Management
I, J K
Mount the Slack Loop Organizer on the
duct fingers to manage excess cables.
L
80" length shown
VERSI-DUCT 5" CHANNEL
CABLE MANAGEMENT
• 80" channel ships in two 40" pieces
for easier handling and installation
• Interlocking tabs maintain flush
channel alignment
• Finger spacing aligns with rack units
VERSI-DUCT HORIZONTAL
CABLE MANAGEMENT
• Fits all standard 19" racks
• Includes bend radius compliant clips
• Finger spacing aligns with patch panel port
openings to better manage patch cords
• Standard black replacement covers
available through inside sales
C14
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
versi-duct
CABLE MANAGEMENT
I
A, B C D
F, G
HORIZONTAL CABLE MANAGERS
• Available in 1RU, 2RU, and 4RU sizes
• All mount to standard 19" racks and cabinets
• 4RU manager includes a shelf to support patch cords
• Horizontal managers support transition to vertical management
• Combo Manager oers front and rear management
• Attach included cable manager to C1 Ultra Blank Panel for high-density installations
HORIZONTAL CABLE MANAGERS
DESCRIPTION FLAT
FLAT W/
METAL COVER
ANGLED RECESSED-
ANGLED
RECESSED-
FLAT
Horizontal Manager, 1RU, 4" metal rings [A] 49253-LPM 4925C-LPM [B] 49254-LPM 4W254-LPM —
Horizontal Manager, 2RU, 4" metal rings 49253-BCM [C] 4925C-BCM 49254-BCM 4W254-BCM —
Horizontal Manager, 2RU, 2" metal rings 49253-2CM — — — —
Horizontal Manager, 4RU, 4" metal rings [D] 49253-4CM 4925C-4CM — — —
Horizontal Manager, 1RU, 6" metal rings 49253-6PM — — — —
Horizontal Manager, 2RU, 6" metal rings 49253-6MR — — — —
Horizontal Manager, 4RU, 6" metal rings 49253-6CM 4925C-6CM — — —
Recessed Horizontal Manager, 1RU, 3" metal rings — — — — [E] 49253-RCM
Horizontal Manager, 2RU, w/ plastic saddles [F] 49252-PO2 — — — —
Horizontal Manager, 1RU, w/ plastic saddles [G] 49252-PO1 — — — —
Combo Front and Rear Manager, 2RU [H] 49252-PCM — — — —
VELCRO® Brand Horizontal Manager, 1RU [I] 41150-019 — — — —
Tie Wrap Bar, 1" H x 1.5" D [J] 49258-TWB — — — —
C1 Ultra Blank Panel / Cable Manager, 2RU [K] C1253-2CM — — — —
Horizontal Manager, 2RU with
4" Slack Loop Organizers (4) [L] 49300-SM2 — — — —
Horizontal Manager, 4RU with
4" Slack Loop Organizers (6) 49300-SM4 — — — —
CABLE MANAGEMENT | Horizontal Cable Managers
E
JK
H
L
C15 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
CABLE MANAGEMENT horizontal
cable managers
CABLE MANAGEMENT | Rear Cable Managers
AB
C D
E
REAR CABLE MANAGEMENT BARS
• Standard Flat Cable Management Bar attaches directly to patch panels
• Standard Angled and Recessed-Angled Cable Management Bars attach directly to rack
• Extended Cable Management Bar handles large cable volumes and includes six VELCRO® Brand straps
• High-Density Cable Management Bar is constructed of die-cast aluminum to support heavy loads of cable
and mounts on front or rear of rack
• Rear Cable Management Bar for Active Equipment offers extended depth for power cord support
and cutouts for air circulation
• e2XHD Rear Cable Manager supports any Leviton panel (see page B29 for more details)
• e2XHD Rear Cable Manager includes rings to help manage and route incoming fiber cables
REAR CABLE MANAGEMENT BARS
DESCRIPTION FLAT ANGLED RECESSED-
ANGLED
Standard Cable Management Bar [A] 49005-CMB [B] 49006-AMB [C] 4W006-AMB
High-Density Cable Management Bar, 1RU [D] 49005-DMB — —
Rear Cable Manager for Active Equipment, 2RU [E] 41188-SM2 — —
e2XHD Rear Cable Manager for Flat Panel, with cable management rings
(four ¼" rings) [F] E2X1F-CMB — —
High-Density Cable Management Bar
Constructed of durable, lightweight
die-cast aluminum, the High-Density 1RU
Cable Management Bar is excellent for
heavy cable loads. The bar supports up
to 48 CAT 6A, CAT 6, or CAT 5e horizontal
cables and fits all industry-standard 19"
racks and cabinets. It can be mounted on
the front or rear of the rack.
Vertical Cable Management Rings
Support and manage vertical and
horizontal cable loads with Vertical Cable
Management Rings (shown on page C18).
The open ring solution is ideal for tight
spaces and smaller deployments. Install
with the Mounting Tie Bracket (shown on
page C18) for center mounting.
F
SPOTLIGHT Cable Management Options
C16
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
CABLE MANAGEMENT rear cable managers
CABLE MANAGEMENT | Blanks & Transitional Covers
A-C D, E
BLANK PANEL INSERTS
DESCRIPTION STANDARD ANGLED RECESSED-
ANGLED
Blank Panel, 4RU [A] 49254-BP4 — —
Blank Panel, 2RU [B] 49254-BP2 [E] 49254-BA2 [F] 4W254-BA2
Blank Panel, 1RU [C] 49254-BP1 [D] 49254-BA1 4W254-BA1
C1 Ultra Blank Panel / Cable Manager, 2RU [G] C1253-2CM — —
TRANSITIONAL COVERS
Transitional Cover, 1RU — [H] 49254-BC1 [I] 4W254-BC1
H, IF, G
BLANK PANEL INSERTS
• Provide a seamless look and designate rack space
for future expansion
• Available for flat, angled, and recessed-angled patch panels
• Attach included cable manager to C1 Ultra Blank Panel
when additional cord management is needed
TRANSITIONAL COVERS
• Provide clean, aesthetic transition from angled
patch panels to flat equipment
• Improve thermal management
• Available for angled and recessed-angled patch panels
Address specific rack and cabinet requirements
with Leviton angled and recessed-angled patch
panels. Standard-angled panels improve patch
cord routing in high-density applications, while
recessed-angled panels are ideal for applications
with minimal depth in front of the panel. Specialized
cable management is available for both styles,
including standard bars, horizontal managers,
blanks, and transitional covers.
Find angled and recessed-angled patch panels
on pages A16-A17.
SPOTLIGHT Angled & Recessed-Angled Panels
C17 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
CABLE MANAGEMENT covers
D F
CABLE MANAGEMENT | Rings & Brackets
C E
B
A
Front Hinged Bracket in the 120° position
CABLE MANAGEMENT RINGS
• Vertical Management Rings are an open ring solution that can be installed in tight spaces and smaller deployments
• Mounting Tie Bracket allows rings to be positioned between racks
• Vertical Transition Rings are used for vertical and horizontal cable management and are compatible with flat
and angled panels
HINGED WALL-MOUNT BRACKETS
• Designed for installations where space is constrained and racks are not used
• 6"-deep brackets allow for proper cable management
• 2RU, 3RU, and 4RU sizes
FRONT HINGED BRACKET
• Simplifies process of terminating cables to rear of patch panels when access is limited
• Easy-access quick-release latches drop to 90º and 120º positions
• Rack or wall mountable
CABLE MANAGEMENT RINGS
DESCRIPTION PART NO.
[A] 3" Vertical Management Rings 49260-MR3
[B] 6" Vertical Management Rings 49260-MR6
[C] Mounting Tie Bracket 49261-BKT
[D] Vertical Transition Rings for Angled and Recessed-Angled Panels, 2RU 49262-HR1
HINGED WALL-MOUNT BRACKETS
[E] Hinged Wall-Mount Bracket, 2RU, 6" depth 49251-W62
Hinged Wall-Mount Bracket, 3RU, 6" depth 49251-W63
Hinged Wall-Mount Bracket, 4RU, 6" depth 49251-W64
FRONT HINGED BRACKET
[F] Front Hinged Bracket, 3RU 49400-FHB
C18
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
CABLE MANAGEMENT rings & brackets
VELCRO BRAND TIE WRAPS
• Available in 5", 8", and 12" lengths (0.5" width)
• Slot helps secure fastening without overtightening
• All wraps come with 25 units per roll
VELCRO BRAND WRAPS – BULK ROLLS
• Available in 15', 75', and 600' bulk rolls (0.5" width)
• Cut to desired length
VELCRO BRAND COMPRESSION STRAPS
• Available in 15" lengths (all 0.5" width)
• Adjustable to support a variety of loads
• Easy feedthrough slot helps secure fastening without
overtightening
• Strap-enclosed area equals 6" diameter
• Holds up to 320 CAT 5e, 200 CAT 6, or 100 CAT 6A
cables in vertical bundles
• 10 units per pack
VELCRO BRAND WRAPS – SOFTCINCH LITE ROLLS
• Thinner depth for smaller bundles
• Tear by hand for quick application
• Available in 75' roll (0.5" width)
CABLE MANAGEMENT | VELCRO® Brand Cable Fasteners
D, E F
GH
VELCRO BRAND CABLE FASTENERS
DESCRIPTION BLACK BLUE YELLOW ORANGE MAROON
(PLENUM RATED)
[A] Tie Wrap, 5" (25 units per roll) 43105-005 43105-05L 43105-05Y 43105-05O 43105-05P
[B] Tie Wrap, 8" (25 units per roll) 43108-008 43108-08L 43108-08Y 43108-08O 43108-08P
[C] Tie Wrap, 12" (25 units per roll) 43112-012 43112-12L 43112-12Y 43112-12O 43112-12P
[D] Bulk Roll, 15' 43115-015 43115-15L 43115-15Y 43115-15O 43115-15P
[E] Bulk Roll, 75' 43115-075 43115-75L 43115-75Y 43115-75O 43115-75P
[F] Bulk Roll, 600' 43115-600 — — — —
[G] Compression Strap (10 units per pack) 44115-15E 44115-15L 44115-15Y — —
[H] SoftCinch Lite Roll, 75' 4S115-75E — — — —
Black Maroon
Orange
Yellow
Blue
Maroon products UL Listed for use in plenum
or air handling spaces per National Electric
Code (NEC) Section 300.
A-C
C19 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
VELCRO
CABLE MANAGEMENT
A, B
CABLE MANAGEMENT | VELCRO® Brand Utility Fasteners
CD
F
VELCRO BRAND UTILITY FASTENERS
• Saddle ties attach to wood surfaces, relay racks, and enclosures
• Saddle ties are 8 ⅜" in length
• Compression straps are an ideal solution for heavy vertical cable runs, 5" in diameter
• J-Hooks are height adjustable to bypass obstacles, and open to 6" diameter
• Workstation loops, with 1.25" diameter, attach with convenient peel-o adhesive
• Storage rings for inside and outside plant ensure copper and fiber optic bend radius; loops included
VELCRO BRAND UTILITY FASTENERS
DESCRIPTION PART NO.
[A] Saddle Ties w/ 10/32 metal rack screws (10 per pack) 41020-SPR
[B] Saddle Ties w/ #8 wood screws (10 per pack) 41010-SPW
[C] J-Hook (10 per pack) 46700-SLG
[D] Compression Strap (2 per pack) 45224-RCS
[E] Workstation Loops w/ peel-o adhesive (25 per pack) 41225-SAP
Storage Rings, Inside Plant, 11.75" diameter 48900-IFR
[F] Storage Rings, Outside Plant, 24" diameter 48900-0FR
Use VELCRO Brand fasteners to secure all cable bundles. Our genuine VELCRO
Brand products won’t crush or damage cables like tie wraps can, and are
reusable for moves, adds, and changes (MACs). Plus, with our extensive range
of fastener styles, colors, and sizes, Leviton has the perfect VELCRO Brand cable
management solution for your unique needs.
2"
2 3/16"
1/4" hole
1 3/4"
Available in 11.75"
and 24" diameter
E
SPOTLIGHT Protect Cables with Genuine VELCRO Brand Fasteners
C20
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
VELCRO
CABLE MANAGEMENT
CABLE MANAGEMENT | Zone Enclosures
• Maximum infrastructure flexibility
• Improved network performance
• Simplified moves, adds, and changes
• Reduced floor space usage
• Significantly reduced cost of ownership
I
n a zone cabling design, cables are routed from the telecommunications room (TR) to
appropriately placed telecommunications enclosures (TE). Cabling is then run from the zone
enclosure to each work area (WA). In an Active Zone Enclosure System, a single fiber run can support
dozens of work areas, significantly reducing cable pathway loading and TR space requirements.
Zone cabling designs are ideal for open oce architecture. Zone cabling benefits include:
MM Fiber
Optic Cable
Zone Enclosure
(Active network
equipment-switch,
router, etc.)
Telecommunications
Room
TE
TE TE
WA
WA
WA WA
WA
WA WA
WA
WA
TR
WA WA WA
2' X 2' PASSIVE RAISED-FLOOR ENCLOSURES
• Fit in air handling space under 8" raised floors
• House two 4RU (8RU total) racks for standard 19" components
• Rotating patch panel mounting provides easy access to rear of panels
ZONE ENCLOSURES
DESCRIPTION PART NO.
[A] Active Ceiling Enclosure, 2' x 2', 2RU active and 5RU passive space Z1000-AC2
[B] Active Ceiling Enclosure, 2' x 4', 4RU active and 10RU passive space Z1000-AC4
[C] Passive Raised-Floor Enclosure, 8" depth, 8RU passive space Z1000-PF2
[D] Passive Ceiling Enclosure, 2' x 2', 5RU passive space Z1000-PC2
ZONE ENCLOSURES
• Provide flexible consolidation points in ceiling or floor
• Simplify moves, adds, and changes (MACs)
• Plenum rated and include fire-rated foam sealing kits
• Significant reduction in cable pathway loading
• Use as a telecom enclosure (TE) for cabling flexibility
CEILING ENCLOSURES
• Install flush with drop ceiling
• Fully hinged drop-down doors support installed
equipment and open to face technician
• Active and passive styles available
• Mount into standard 2' x 2' and 2' x 4' ceiling tiles
• Active enclosures include AC power back box and
venting for active equipment
A B
C D
SPOTLIGHT Zone Cabling Design Benefits
C21 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
zone enclosures
CABLE MANAGEMENT
CABLE MANAGEMENT | Wireless Access Point Enclosures
BA
5" WIRELESS ACCESS POINT CEILING ENCLOSURE
• Single edge-protected access port includes a fire-rated foam sealing kit
• Suitable for installation in air spaces
• Mount into a standard 2' x 2' ceiling tile
4" WIRELESS ACCESS POINT CEILING ENCLOSURE
• Accommodates one wireless access point or bridge
• Removable door-mounted bracket supports equipment up to 10.5" W x 5.5" H x 1.875" D
• Includes fully hinged, lockable door with two round holes for access point antennae
CEILING ENCLOSURE FACEPLATE
• Fits 5"-depth enclosure
• Fully hinged and lockable
WALL-MOUNT ENCLOSURE
• Rugged steel construction with lock assembly
• Accommodates equipment sized 9.5" W x 6.5" H x 2.75" D
WIRELESS ACCESS POINT CEILING ENCLOSURES
DESCRIPTION PART NO.
[A] Wireless Access Point Ceiling Enclosure, 5" depth, faceplate sold separately W1000-WC5
[B] Wireless Access Point Ceiling Enclosure, 4" depth, with faceplate W1000-WC0
WIRELESS ACCESS POINT CEILING ENCLOSURE FACEPLATES (REQUIRED FOR 5" ENCLOSURE)
[C] Blank Faceplate (fits 5" Wireless Access Point Enclosure) W1000-F01
WIRELESS ACCESS POINT WALL-MOUNT ENCLOSURE
[D] Wireless Access Point Wall-Mount Enclosure (accommodates Cisco Aironet® 350 or equivalent) W1000-WW0
All enclosures and faceplates are powder-coated white.
DC
C22
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
CABLE MANAGEMENT wireless enclosures
POWER SOLUTIONS
SECTION
D
D2
SECTION DCONTENTS
POWER
DISTRIBUTION
UNITS (PDUs)
D3 FLX Series
D9 Switched & Metered Series
D11 P1000 Series
D13 5500 & 5505 Series
D14 4500 Series
DATA CENTER READY
• Tested for temperature, humidity, vibration, and shock conditions that
exceed the ranges in section 5 of the Telcordia GR63 standard
• 18-gauge cold-rolled steel construction
• All 208V units include UL-489 circuit breakers
• 208V units (single and 3-phase) provided with Type DP cords for
NEC 645 compliance
• Grounding stud provides easy and reliable grounding
• cULus Listed 60950-1
• Every unit is factory burned-in and tested
Leviton FLX Series PDUs provide reliable power distribution into racks and cabinets, with
output power ranging from 2.0 kW to 12.5 kW. Metered units include a Smart Meter
Technology display showing voltage, amperage, and wattage for the total PDU and for
each individual branch (3-phase units). FLX Series PDUs are available in a wide selection
of input plugs and output receptacles meeting both NEMA and IEC standards. All PDUs
include UL-rated breakers for branch circuit protection. The 70" PDUs mount vertically in
racks or cabinets, and feature data-center quality design and construction.
POWER DISTRIBUTION | FLX Series
RECOMMENDED
APPLICATIONS:
Data Center
Cabinets
Telecommunications
Racks
Quick Network
Deployment
INPUT FLEXIBILITY
• 120V & 208V Single-Phase and 208V 3-Phase (WYE or Delta)
• 12 input plug options meeting both NEMA and IEC 60309 standards
• 208V units (single and 3-phase) provided with Type DP cable for
NEC 645 compliance
• 120V units available with locking or non-locking input plugs
• Cord lengths from 3 to 15 feet (10 feet standard)
D3 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
power distribution
POWER
MOUNTING FLEXIBILITY
• Bracket and button-mounting hardware included
for compatibility with a wide range of rack
and cabinet applications
• Optional adjustable rack-mounting bracket available
for open-frame racks*
• Cable management available for securing cords
and improving aesthetics*
*See page D5 for FLX Series accessories.
OUTPUT FLEXIBILITY
• Output power ranging from 2.0 kW to 12.5 kW
• 3-phase units available with 120V, 208V,
and 120V/208V output
• Output receptacles include NEMA 5-20R and L6-20R;
IEC 60320 C13 and C19
POWER DISTRIBUTION | FLX Series
SMART METER TECHNOLOGY
• Displays amps, volts, and watts
• Gravity sensor detects PDU orientation and auto-inverts display
• Auto-scrolling feature on 3-phase units displays bank-level information
• Amperage and wattage accuracy: ± 5%
• Voltage accuracy: ± 2%
•
Blue LEDs increase visibility and require minimal power to operate display
D
i
s
p
l
a
y
A
u
t
o
-
I
n
v
e
r
t
s
D4
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
power distribution
POWER
L15-20P
NEMA
L15-30P
NEMA Non-NEMA
L21-20P
NEMA
L21-30P
NEMA
NEMA
L6-20P
NEMA
L5-20P
NEMA
L5-30P
5-20P
NEMA
NEMA
L6-30P
CS8365C
560P9W
IEC 60309
460P9W
IEC 60309
Single Phase
120V
Single Phase
208V
3-Phase
208V Delta
3-Phase
208V WYE
OUTPUT RECEPTACLE TYPES
INPUT PLUG TYPES
3-Phase
208V FLX PDU
POWER DISTRIBUTION | FLX Series
FLX SERIES ACCESSORIES
DESCRIPTION PART NO.
Adjustable Extension Mounting Bracket PDURK-BKT
Power Cord Management Bar PDURK-MGR
Adjustable Mounting Bracket Power Cord Management Bar
Single-Phase
208V FLX PDU
Dimensions: 70" H x 2.3" W x 2.4" D
NEMA
5-20R 120V
IEC 60320
C13 208V
IEC 60320
C19 208V
NEMA
L6-20R 208V
D5 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
power distribution
POWER
POWER DISTRIBUTION | FLX Series > Options
The FLX Series oers a variety of configurations to meet many dierent applications and power requirements.
The information contained in the following tables will assist you in finding the right FLX model to meet your needs.
FLX PDU INPUT AND OUTPUT CHARACTERISTICS BY PLUG TYPE
PDU INPUT PDU OUTPUT
PLUG TYPE INPUT VOLTAGE PLUG RATING CONTINUOUS INPUT CURRENT OUTPUT POWER MAX. OUTPUT CURRENT
5-20P 120V Single Phase 20A 16A 2.0 kW 16A Total
L5-20P 120V Single Phase 20A 16A 2.0 kW 16A Total
L5-30P 120V Single Phase 30A 24A 3.0 kW 24A Total
L6-20P 208V Single Phase 20A 16A 3.3 kW 16A Total
L6-30P 208V Single Phase 30A 24A 5.0 kW 24A Total
L15-20P 208V 3-Phase Delta 20A 16A 5.8 kW 9.3A / Bank
L15-30P 208V 3-Phase Delta 30A 24A 8.6 kW 13.8A / Bank
CS8365C 208V 3-Phase Delta 50A 35A 12.5 kW 20A / Bank
460P9W 208V 3-Phase Delta 60A 35A 12.5 kW 20A / Bank
L21-20P 208V 3-Phase WYE 20A 16A 5.8 kW 9.3A / Bank
L21-30P 208V 3-Phase WYE 30A 24A 8.6 kW 13.8A / Bank
560P9W 208V 3-Phase WYE 60A 35A 12.5 kW 20A / Bank
FLX PDU PRODUCT LIST BY OUTPUT RECEPTACLE CONFIGURATION
OUTLET QTY
& TYPE
120V SINGLE PHASE 208V SINGLE
PHASE 3-PHASE WYE 3-PHASE DELTA
5-20P L5-20P L5-30P L6-20P L6-30P L21-20P L21-30P 560P9W L15-20P L15-30P CS8365C 460P9W
(24) 5-20R FM106 FM107 FM105 — — — — — — — — —
(24) C13; (6) C19;
(6) 5-20R —————FM379
—
FM380
—
FM381
———— —
(36) C13; (6) C19 —————FM355
FB355
FM356
FB356
FM388
FB388
FM413
FB413
FM403
FB403
FM354
FB354
FM429
FB429
(24) C13; (6) C19 ———FM204
FB204
FM206
FB206
FM313
FB313
FM315
FB315
FM361
FB361
FM410
FB410
FM445
FB445
FM337
FB337
FM424
FB424
(24) C13; (4) C19;
(4) L6-20R —————FM373
FB373
FM374
FB374
FM375
FB375
FM431
FB431
FM432
FB432
FM433
FB433
FM434
FB434
(8) C13; (4) L6-20R;
(12) 5-20R —————FM376
—
FM377
—
FM378
—————
(12) C13; (12) C19 —————FM389
FB389
FM390
FB390
FM391
FB391
FM450
FB450
FM451
FB451
FM452
FB452
FM453
FB453
(12) L6-20R —————FM347
FB347
FM348
FB348
FM371
FB371
FM406
FB406
FM407
FB407
FM346
FB346
FM426
FB426
(36) 5-20R —————FM310
FB310
FM311
FB311
FM360
FB360 ——— —
(12) C13; (18) C19 —————FM382
FB382
FM386
FB386
FM387
FB387
FM446
FB446
FM447
FB447
FM448
FB448
FM449
FB449
(24) C13; (3) 5-20R —————FM330
FB330
FM331
FB331
FM367
FB367 ——— —
(36) C13 —————FM353
FB353
FM324
FB324
FM364
FB364
FM411
FB411
FM412
FB412
FM352
FB352
FM428
FB428
(12) L6-20R ———FM207
FB207
FM210
FB210 ——— ——— —
FLX PDUs are available with a cord length of 3 - 15 feet. The default cord length is 10 feet.
— Indicates configuration is not available.
D6
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
power distribution
POWER
POWER DISTRIBUTION | FLX Series > Part Numbers
FLX PDUs ship in five days or less for quantities up to 25 units. For delivery information that includes transit time from
the factory to your specific location, please contact Leviton inside sales at 800.722.2082.
SINGLE-PHASE 120V INPUT POWER DISTRIBUTION UNITS (PDUs)
PART NO. INPUT OUTPUT
METERED BASIC* PLUG
TYPE VOLTAGE CONTINUOUS
CURRENT POWER VOLTAGE RECEPTACLE
QTY & TYPE
MAXIMUM
CURRENT
FM106-10S — 5-20P 120V Single Phase 16A 2.0 kW 120V (24) 5-20R 16A Total
FM107-10L — L5-20P 120V Single Phase 16A 2.0 kW 120V (24) 5-20R 16A Total
FM105-10L — L5-30P 120V Single Phase 24A 3.0 kW 120V (24) 5-20R 24A Total
SINGLE-PHASE 208V INPUT POWER DISTRIBUTION UNITS (PDUs)
PART NO. INPUT OUTPUT
METERED BASIC PLUG
TYPE VOLTAGE CONTINUOUS
CURRENT POWER VOLTAGE RECEPTACLE
QTY & TYPE
MAXIMUM
CURRENT
FM204-10L FB204-10L L6-20P 208V Single Phase 16A 3.3 kW 208V (24) C13; (6) C19 16A Total
FM207-10L FB207-10L L6-20P 208V Single Phase 16A 3.3 kW 208V (12) L6-20R 16A Total
FM206-10L FB206-10L L6-30P 208V Single Phase 24A 5.0 kW 208V (24) C13; (6) C19 24A Total
FM210-10L FB210-10L L6-30P 208V Single Phase 24A 5.0 kW 208V (12) L6-20R 24A Total
3-PHASE 208V INPUT POWER DISTRIBUTION UNITS (PDUs)
PART NO. INPUT OUTPUT
METERED BASIC PLUG
TYPE VOLTAGE CONTINUOUS
CURRENT POWER VOLTAGE RECEPTACLE
QTY & TYPE
MAXIMUM
CURRENT
FM431-10L FB431-10L L15-20P 208V 3-Phase Delta 16A 5.8 kW 208V (24) C13; (4) C19; (4) L6-20R 9.3A / Bank
FM410-10L FB410-10L L15-20P 208V 3-Phase Delta 16A 5.8 kW 208V (24) C13; (6) C19 9.3A / Bank
FM413-10L FB413-10L L15-20P 208V 3-Phase Delta 16A 5.8 kW 208V (36) C13; (6) C19 9.3A / Bank
FM450-10L FB450-10L L15-20P 208V 3-Phase Delta 16A 5.8 kW 208V (12) C13; (12) C19 9.3A / Bank
FM446-10L FB446-10L L15-20P 208V 3-Phase Delta 16A 5.8 kW 208V (12) C13; (18) C19 9.3A / Bank
FM406-10L FB406-10L L15-20P 208V 3-Phase Delta 16A 5.8 kW 208V (12) L6-20R 9.3A / Bank
FM411-10L FB411-10L L15-20P 208V 3-Phase Delta 16A 5.8 kW 208V (36) C13 9.3A / Bank
FM373-10L FB373-10L L21-20P 208V 3-Phase WYE 16A 5.8 kW 208V (24) C13; (4) C19; (4) L6-20R 9.3A / Bank
FM313-10L FB313-10L L21-20P 208V 3-Phase WYE 16A 5.8 kW 208V (24) C13; (6) C19 9.3A / Bank
FM379-10L — L21-20P 208V 3-Phase WYE 16A 5.8 kW 120V & 208V (24) C13; (6) C19; (6) 5-20R 9.3A / Bank
FM355-10L FB355-10L L21-20P 208V 3-Phase WYE 16A 5.8 kW 208V (36) C13; (6) C19 9.3A / Bank
FM389-10L FB389-10L L21-20P 208V 3-Phase WYE 16A 5.8 kW 208V (12) C13; (12) C19 9.3A / Bank
FM382-10L FB382-10L L21-20P 208V 3-Phase WYE 16A 5.8 kW 208V (12) C13; (18) C19 9.3A / Bank
FM347-10L FB347-10L L21-20P 208V 3-Phase WYE 16A 5.8 kW 208V (12) L6-20R 9.3A / Bank
FM330-10L FB330-10L L21-20P 208V 3-Phase WYE 16A 5.8 kW 120V & 208V (24) C13; (3) 5-20R 9.3A / Bank
FM310-10L FB310-10L L21-20P 208V 3-Phase WYE 16A 5.8 kW 120V (36) 5-20R 9.3A / Bank
FM353-10L FB353-10L L21-20P 208V 3-Phase WYE 16A 5.8 kW 208V (36) C13 9.3A / Bank
FM376-10L — L21-20P 208V 3-Phase WYE 16A 5.8 kW 120V & 208V (8) C13; (4) L6-20R;
(12) 5-20R 9.3A / Bank
FLX PDUs are available with a cord length of 3 - 15 feet in 1-foot increments.
The default cord length is 10 feet. To order a dierent cord length, simply replace the 10 with the desired length. For example, FM380-15L features a 15' cord.
Standard dimensions are 70" H x 2.3" W x 2.4" D. For units with UL 489-rated circuit breakers, add an additional 1" of depth at the base of the PDU for the circuit
breaker enclosure.
* Basic = non-metered
D7 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
power distribution
POWER
POWER DISTRIBUTION | FLX Series > Part Numbers
3-PHASE 208V INPUT POWER DISTRIBUTION UNITS (PDUs)
PART NO. INPUT OUTPUT
METERED BASIC* PLUG
TYPE VOLTAGE CONTINUOUS
CURRENT POWER VOLTAGE RECEPTACLE
QTY & TYPE
MAXIMUM
CURRENT
FM451-10L FB451-10L L15-30P 208V 3-Phase Delta 24A 8.6 kW 208V (12) C13; (12) C19 13.8A / Bank
FM447-10L FB447-10L L15-30P 208V 3-Phase Delta 24A 8.6 kW 208V (12) C13; (18) C19 13.8A / Bank
FM407-10L FB407-10L L15-30P 208V 3-Phase Delta 24A 8.6 kW 208V (12) L6-20R 13.8A / Bank
FM412-10L FB412-10L L15-30P 208V 3-Phase Delta 24A 8.6 kW 208V (36) C13 13.8A / Bank
FM432-10L FB432-10L L15-30P 208V 3-Phase Delta 24A 8.6 kW 208V (24) C13; (4) C19; (4) L6-20R 13.8A / Bank
FM445-10L FB445-10L L15-30P 208V 3-Phase Delta 24A 8.6 kW 208V (24) C13; (6) C19 13.8A / Bank
FM403-10L FB403-10L L15-30P 208V 3-Phase Delta 24A 8.6 kW 208V (36) C13; (6) C19 13.8A / Bank
FM390-10L FB390-10L L21-30P 208V 3-Phase WYE 24A 8.6 kW 208V (12) C13; (12) C19 13.8A / Bank
FM386-10L FB386-10L L21-30P 208V 3-Phase WYE 24A 8.6 kW 208V (12) C13; (18) C19 13.8A / Bank
FM348-10L FB348-10L L21-30P 208V 3-Phase WYE 24A 8.6 kW 208V (12) L6-20R 13.8A / Bank
FM331-10L FB331-10L L21-30P 208V 3-Phase WYE 24A 8.6 kW 120V & 208V (24) C13; (3) 5-20R 13.8A / Bank
FM311-10L FB311-10L L21-30P 208V 3-Phase WYE 24A 8.6 kW 120V (36) 5-20R 13.8A / Bank
FM324-10L FB324-10L L21-30P 208V 3-Phase WYE 24A 8.6 kW 208V (36) C13 13.8A / Bank
FM377-10L — L21-30P 208V 3-Phase WYE 24A 8.6 kW 120V & 208V (8) C13; (4) L6-20R; (12)
5-20R 13.8A / Bank
FM374-10L FB374-10L L21-30P 208V 3-Phase WYE 24A 8.6 kW 208V (24) C13; (4) C19; (4) L6-20R 13.8A / Bank
FM315-10L FB315-10L L21-30P 208V 3-Phase WYE 24A 8.6 kW 208V (24) C13; (6) C19 13.8A / Bank
FM380-10L — L21-30P 208V 3-Phase WYE 24A 8.6 kW 120V & 208V (24) C13; (6) C19; (6) 5-20R 13.8A / Bank
FM356-10L FB356-10L L21-30P 208V 3-Phase WYE 24A 8.6 kW 208V (36) C13; (6) C19 13.8A / Bank
FM434-10L FB434-10L 460P9W 208V 3-Phase Delta 35A 12.5 kW 208V (24) C13; (4) C19; (4) L6-20R 20A / Bank
FM424-10L FB424-10L 460P9W 208V 3-Phase Delta 35A 12.5 kW 208V (24) C13; (6) C19 20A / Bank
FM429-10L FB429-10L 460P9W 208V 3-Phase Delta 35A 12.5 kW 208V (36) C13; (6) C19 20A / Bank
FM453-10L FB453-10L 460P9W 208V 3-Phase Delta 35A 12.5 kW 208V (12) C13; (12) C19 20A / Bank
FM449-10L FB449-10L 460P9W 208V 3-Phase Delta 35A 12.5 kW 208V (12) C13; (18) C19 20A / Bank
FM428-10L FB428-10L 460P9W 208V 3-Phase Delta 35A 12.5 kW 208V (36) C13 20A / Bank
FM426-10L FB426-10L 460P9W 208V 3-Phase Delta 35A 12.5 kW 208V (12) L6-20R 20A / Bank
FM375-10L FB375-10L 560P9W 208V 3-Phase WYE 35A 12.5 kW 208V (24) C13; (4) C19; (4) L6-20R 20A / Bank
FM361-10L FB361-10L 560P9W 208V 3-Phase WYE 35A 12.5 kW 208V (24) C13; (6) C19 20A / Bank
FM381-10L — 560P9W 208V 3-Phase WYE 35A 12.5 kW 120V & 208V (24) C13; (6) C19; (6) 5-20R 20A / Bank
FM388-10L FB388-10L 560P9W 208V 3-Phase WYE 35A 12.5 kW 208V (36) C13; (6) C19 20A / Bank
FM391-10L FB391-10L 560P9W 208V 3-Phase WYE 35A 12.5 kW 208V (12) C13; (12) C19 20A / Bank
FM387-10L FB387-10L 560P9W 208V 3-Phase WYE 35A 12.5 kW 208V (12) C13; (18) C19 20A / Bank
FM371-10L FB371-10L 560P9W 208V 3-Phase WYE 35A 12.5 kW 208V (12) L6-20R 20A / Bank
FM367-10L FB367-10L 560P9W 208V 3-Phase WYE 35A 12.5 kW 120V & 208V (24) C13; (3) 5-20R 20A / Bank
FM360-10L FB360-10L 560P9W 208V 3-Phase WYE 35A 12.5 kW 120V (36) 5-20R 20A / Bank
FM364-10L FB364-10L 560P9W 208V 3-Phase WYE 35A 12.5 kW 208V (36) C13 20A / Bank
FM378-10L — 560P9W 208V 3-Phase WYE 35A 12.5 kW 120V & 208V (8) C13; (4) L6-20R; (12)
5-20R 20A / Bank
FM433-10L FB433-10L CS8365C 208V 3-Phase Delta 35A 12.5 kW 208V (24) C13; (4) C19; (4) L6-20R 20A / Bank
FM337-10L FB337-10L CS8365C 208V 3-Phase Delta 35A 12.5 kW 208V (24) C13; (6) C19 20A / Bank
FM354-10L FB354-10L CS8365C 208V 3-Phase Delta 35A 12.5 kW 208V (36) C13; (6) C19 20A / Bank
FM452-10L FB452-10L CS8365C 208V 3-Phase Delta 35A 12.5 kW 208V (12) C13; (12) C19 20A / Bank
FM448-10L FB448-10L CS8365C 208V 3-Phase Delta 35A 12.5 kW 208V (12) C13; (18) C19 20A / Bank
FM346-10L FB346-10L CS8365C 208V 3-Phase Delta 35A 12.5 kW 208V (12) L6-20R 20A / Bank
FM352-10L FB352-10L CS8365C 208V 3-Phase Delta 35A 12.5 kW 208V (36) C13 20A / Bank
* Basic = non-metered
D8
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
power distribution
POWER
SWITCHED SERIES
• Full-featured network management provided via Web, SNMP, and Telnet allows
remote access, configuration, and management
• Remote individual outlet control allows shut-down of unused outlets and remote rebooting
of attached equipment
• Aggregate current draw can be monitored remotely or locally via digital display
• Power sequencing minimizes in-rush current and prevents circuit overload
• SNMP alerts when power or environmental conditions exceed thresholds
• Firmware is easily upgraded via network download to installed units for future
product enhancements
• External probe available separately for relative temperature and humidity monitoring;
simply plug it into one of two RJ-11 ports
• Available in vertical Zero-U or horizontal rack-mount styles
• Attaches to most common cabinets and racks with included mounting hardware
• Switched Series includes all features from the Metered Series
METERED SERIES
• Current monitoring helps prevent overloads in high-density computing environments
• Available in vertical Zero-U or horizontal rack-mount styles
• Horizontal units mount on 19" racks and cabinets
• Included mounting hardware allows attachment to most common cabinets and racks
• Optional adjustable rack-mounting bracket available for vertical units
A, B
C
STANDARDS &
CERTIFICATIONS
UL 60950-1
LISTED | #E228302
POWER DISTRIBUTION | Switched & Metered Series
D
RECOMMENDED
APPLICATIONS:
Data Center Cabinets
Telecommunications
Racks
Adjustable extension mounting
brackets available; see spotlight
on page D11.
FE
D9 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
power distribution
POWER
POWER DISTRIBUTION | Switched & Metered Series
PCORD-G10
ACCESSORIES
DESCRIPTION PART NO.
Modular Power Cord, C19 to 5-15P, 10' PCORD-G10
Modular Power Cord, C19 to 5-20P, 10' PCORD-A10
Modular Power Cord, C19 to L5-20P, 10' PCORD-H10
Temperature & Relative Humidity Probe, 10' TCORD-010
INPUT PLUG TYPES
TCORD-010
OUTPUT RECEPTACLE TYPES
NEMA
L5-20P 120V
NEMA
L5-30P 120V5-20P 120V
NEMA NEMA
L6-30P 208V5-15P 120V
NEMA NEMA
5-20R 120V
IEC 60320
C13 208V
SWITCHED SERIES VERTICAL POWER DISTRIBUTION UNITS (PDUs)
PART NO.
INPUT OUTPUT
DIMENSIONS
VOLTAGE AMPS INPUT CORD TYPE,
LENGTH & PLUG VOLTAGE RECEPTACLE
TYPE
RECEPTACLE
QUANTITY
[A] SV161-1D1* 120V 20A Modular Cord sold separately;
see accessories below 120V 5-20R 16 44.4" L x 1.75" W x 2.25" D
[B] SV162-1C2 208V 30A
Hardwired; 10' w/L6-30P plug
208V C13 16 49.5" L x 1.75" W x 2.25" D
METERED SERIES VERTICAL POWER DISTRIBUTION UNITS (PDUs)
PART NO.
INPUT OUTPUT
DIMENSIONS
VOLTAGE AMPS INPUT CORD TYPE,
LENGTH & PLUG VOLTAGE RECEPTACLE
TYPE
RECEPTACLE
QUANTITY
MV121-1B1 120V 30A
Hardwired; 10' w/L5-30P plug
120V 5-20R 12 31.25" L x 1.75" W x 2.25" D
MV241-1D1*
120V 20A Modular Cord sold separately;
see accessories below 120V 5-20R 24 54.0" L x 1.75" W x 2.25" D
MV242-1C2 208V 30A
Hardwired; 10' w/L6-30P plug
208V C13 24 54.0" L x 1.75" W x 2.25" D
SWITCHED SERIES HORIZONTAL POWER DISTRIBUTION UNITS (PDUs)
PART NO.
INPUT OUTPUT
DIMENSIONS
VOLTAGE AMPS INPUT CORD TYPE,
LENGTH & PLUG VOLTAGE RECEPTACLE
TYPE
RECEPTACLE
QUANTITY
[C] SH081-1D1* 120V 20A Modular Cord sold separately;
see accessories below 120V 5-20R 8 1.75" H x 17" W x 7" D
[D] SH082-1C2 208V 30A
Hardwired; 10' w/L6-30P plug
208V C13 8 1.75" H x 17" W x 7" D
METERED SERIES HORIZONTAL POWER DISTRIBUTION UNITS (PDUs)
PART NO.
INPUT OUTPUT
DIMENSIONS
VOLTAGE AMPS INPUT CORD TYPE,
LENGTH & PLUG VOLTAGE RECEPTACLE
TYPE
RECEPTACLE
QUANTITY
[E] MH101-1D1* 120V 20A Modular Cord sold separately;
see accessories below 120V 5-20R 10 1.75" H x 17.5" W x 5" D
[F] MH122-1C2 208V 30A
Hardwired; 10' w/L6-30P plug
208V C13 12 1.75" H x 17.5" W x 5" D
* = 120V/20A PDUs require a modular power cord.
D10
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
power distribution
POWER
Mount Leviton Vertical PDUs in open-frame racks with adjustable PDU Extension
Mounting Brackets to make room for cable management and other hardware.
Robust 14-gauge construction ensures ample support for the PDU and attached
power cords. The PDU Extension Mounting Bracket (PDURK-BKT) works with all
Leviton vertical PDUs including FLX, Switched, Metered, and P1000 Series.
See ordering information on page D5.
POWER DISTRIBUTION | P1000 Series
C-E
AB
STANDARDS & CERTIFICATIONS
UL 60950-1 LISTED | #E228302
UL 1449 LISTED 3RD ED. | #E228302
(P1070 SERIES ONLY)
RECOMMENDED APPLICATIONS:
Data Center Cabinets
Telecommunications Racks
Leviton P1000 Series Rack PDUs are designed for data centers, wiring closets,
and other environments that require cost-eective, “always on” power. The robust,
compact design ensures that these products can be used wherever reliability and
density are important.
P1000 SERIES
• All models feature circuit breaker protection to prevent current overloads
• Available in 120V or 208V versions with 15, 20, or 30 amps
• 208V PDUs come with 2-pole circuit breakers for added safety
• Surge-protected models prevent damage from transient surges
• LED indicators for power, grounding/polarity, and surge protection where applicable
• Hardwired power input cord
• 18-gauge cold-rolled steel construction
• Available in vertical Zero-U or horizontal 19" rack-mount styles
• Mounting hardware included; optional adjustable rack-mounting bracket available
Vertical P1000 units ship with flat brackets,
L-brackets, backplates, mounting buttons,
screws, and washers to support a variety of
workstation options.
SPOTLIGHT PDU Adjustable Extension Mounting Brackets
D11 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
power distribution
POWER
NEMA
L6-20P 208V
NEMA
L5-20P 120V
NEMA
L5-30P 120V
5-20P 120V
NEMA NEMA
L6-30P 208V
5-15P 120V
NEMA
INPUT PLUG TYPES
UNMETERED HORIZONTAL POWER DISTRIBUTION UNITS (PDUs), SINGLE INPUT
PART NO.
INPUT OUTPUT
DIMENSIONS
VOLTAGE AMPS CORD
LENGTH
PLUG
TYPE VOLTAGE RECEPTACLE
TYPE
RECEPTACLE
QUANTITY
P1020-12S 120V 15A 12' 5-15P 120V 5-15R 10 1.75" H x 17.5" W x 4.5" D
[A] P1021-12S 120V 20A 12' 5-20P 120V 5-20R 10 1.75" H x 17.5" W x 4.5" D
P1022-12L 120V 20A 12' L5-20P 120V 5-20R 10 1.75" H x 17.5" W x 4.5" D
P1023-12L 120V 30A 12' L5-30P 120V 5-20R 16 3.5" H x 17.5" W x 4.5" D
[B] P1024-12L 208V 20A 12' L6-20P 208V C13 12 1.75" H x 17.5" W x 4.5" D
P1025-12L 208V 30A 12' L6-30P 208V C13 16 3.5" H x 17.5" W x 4.5" D
UNMETERED VERTICAL POWER DISTRIBUTION UNITS (PDUs), SINGLE INPUT
PART NO.
INPUT OUTPUT
DIMENSIONS
VOLTAGE AMPS CORD
LENGTH
PLUG
TYPE VOLTAGE RECEPTACLE
TYPE
RECEPTACLE
QUANTITY
P1040-10S 120V 15A 10' 5-15P 120V 5-15R 16 30" L x 1.8" W x 1.75" D
[C] P1041-10S 120V 20A 10' 5-20P 120V 5-20R 16 30" L x 1.8" W x 1.75" D
P1042-10L 120V 20A 10' L5-20P 120V 5-20R 16 30" L x 1.8" W x 1.75" D
P1043-10S 120V 20A 10' 5-20P 120V 5-20R 24 48" L x 1.8" W x 1.75" D
[D] P1044-10L 120V 20A 10' L5-20P 120V 5-20R 24 48" L x 1.8" W x 1.75" D
P1045-10L 120V 30A 10' L5-30P 120V 5-20R 24 48" L x 1.8" W x 1.75" D
P1046-10L 208V 20A 10' L6-20P 208V C13 24 48" L x 2.19" W x 2" D
[E] P1047-10L 208V 30A 10' L6-30P 208V C13 24 48" L x 2.19" W x 2" D
SURGE-PROTECTED VERTICAL POWER DISTRIBUTION UNITS (PDUs), SINGLE INPUT
PART NO.
INPUT OUTPUT
DIMENSIONS
VOLTAGE AMPS CORD
LENGTH
PLUG
TYPE VOLTAGE RECEPTACLE
TYPE
RECEPTACLE
QUANTITY
P1070-10S 120V 15A 10' 5-15P 120V 5-15R 16 30" L x 2.19" W x 1.73" D
P1071-10S 120V 20A 10' 5-20P 120V 5-20R 16 30" L x 2.19" W x 1.73" D
P1072-10L 120V 20A 10' L5-20P 120V 5-20R 16 30" L x 2.19" W x 1.73" D
P1073-10S 120V 20A 10' 5-20P 120V 5-20R 24 48" L x 2.19" W x 1.73" D
P1074-10L 120V 20A 10' L5-20P 120V 5-20R 24 48" L x 2.19" W x 1.73" D
All P1000 Series PDUs have hard-wired cords.
POWER DISTRIBUTION | P1000 Series
OUTPUT RECEPTACLE TYPES
NEMA
5-15R 120V
NEMA
5-20R 120V
IEC 60320
C13 208V
D12
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
power distribution
POWER
POWER DISTRIBUTION | 5500 & 5505 Series
5500/5505 SERIES RACK-MOUNT POWER DISTRIBUTION UNITS (PDUs) WITH SURGE PROTECTION
PART NO. FOOTPRINT
ON/OFF
SWITCH INPUT OUTPUT
YES NO INPUT
VOLTAGE AMPS CORD
LENGTH
INPUT
PLUG
OUTPUT
VOLTAGE
RECEPTACLE
TYPE
RECEPTACLE
QUANTITY
[A] 5500-190 Horizontal / Rack Mnt. • 120V 15A 12' 5-15P 120V 5-15R 12
5500-192 Horizontal / Rack Mnt. • 120V 20A 12' 5-20P 120V 5-20R 12
5500-20L Horizontal / Rack Mnt. • 120V 20A 12' L5-20P 120V 5-20R 12
5500-15N Horizontal / Rack Mnt. • 120V 15A 12' 5-15P 120V 5-15R 12
[B] 5500-20N Horizontal / Rack Mnt. • 120V 20A 12' 5-20P 120V 5-20R 12
5500-2NL Horizontal / Rack Mnt. • 120V 20A 12' L5-20P 120V 5-20R 12
5505-190 Horizontal / Rack Mnt. • 120V 15A 12' 5-15P 120V 5-15R 12
BA
5500 SERIES W/ ENHANCED SURGE PROTECTION
• Peak surge current: 72 kA
• VPR — L-N: 400 Vpk, L-G/N-G: 500 Vpk
•
EMI/RFI noise filtering: 100 kHz to 30 MHz, -10 dB to -35 dB
• Type SPD: 4
• Physical dimensions: 1.75" H x 19" W x 4.55" D
5505 SERIES W/ SURGE PROTECTION
• Peak surge current: 27 kA
• VPR — L-N: 600 Vpk, L-G/N-G: 700 Vpk
• EMI/RFI noise filtering: 100 kHz to 30 MHz, -5 dB to -40 dB
• Type SPD: 4
• Physical dimensions: 1.75" H x 19" W x 2.5" D
• Resettable circuit breaker to protect against overloading
• 12 receptacles: 10 in back, 2 in front
• 20-amp versions available with either straight blade
or locking input plug
• Mounts horizontally on 19" racks or cabinets
STANDARDS & CERTIFICATIONS
UL 1363 RECOGNIZED | #E118936
5500: UL 1449 LISTED 3RD ED. | #E118936/3/1
5505: UL 1449 LISTED 3RD ED. | #E118936/3/2
Leviton 5500 and 5505 Series Power Distribution Units (PDUs) help power and protect vital electronic equipment.
These PDUs are similar to the 4500 Series, but with the added assurance of surge protection. The 5500 and 5505
Series share several key features, including:
NEMA
L5-20P 120V
5-20P 120V
NEMA
5-15P 120V
NEMA
INPUT PLUG TYPES OUTPUT RECEPTACLE TYPES
NEMA
5-15R 120V
NEMA
5-20R 120V
D13 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
power distribution
POWER
B
STANDARDS & CERTIFICATIONS
UL 1363 RECOGNIZED | #E118936
UL 60950-1 LISTED | #E228302
POWER DISTRIBUTION | 4500 Series
A
4500 SERIES RACK-MOUNT POWER DISTRIBUTION UNITS (PDUs)
PART NO. FOOTPRINT
ON/OFF
SWITCH INPUT OUTPUT
YES NO INPUT
VOLTAGE AMPS CORD
LENGTH
INPUT
PLUG
OUTPUT
VOLTAGE
RECEPTACLE
TYPE
RECEPTACLE
QUANTITY
4515-07S Horizontal / Rack Mnt. • 120V 15A 7' 5-15P 120V 5-15R 12
[A] 4515-10S Horizontal / Rack Mnt. • 120V 15A 10' 5-15P 120V 5-15R 12
4515-15S Horizontal / Rack Mnt. • 120V 15A 15' 5-15P 120V 5-15R 12
4520-07S Horizontal / Rack Mnt. • 120V 20A 7' 5-20P 120V 5-20R 12
[B] 4520-10S Horizontal / Rack Mnt. • 120V 20A 10' 5-20P 120V 5-20R 12
4520-15S Horizontal / Rack Mnt. • 120V 20A 15' 5-20P 120V 5-20R 12
4520-07L* Horizontal / Rack Mnt. • 120V 20A 7' L5-20P 120V 5-20R 12
4520-10L* Horizontal / Rack Mnt. • 120V 20A 10' L5-20P 120V 5-20R 12
4520-15L* Horizontal / Rack Mnt. • 120V 20A 15' L5-20P 120V 5-20R 12
* 4520-07L formerly 4505-20L; 4520-10L formerly 4505-20T; 4520-15L formerly 4505-20F.
RECOMMENDED APPLICATIONS:
(5500/5505/4500)
Telecommunications Racks
Leviton 4500 Series Power Distribution Units (PDUs) provide the robust
and economical solutions needed to power vital electronic equipment.
Similar to the 5500 series, but without surge protection, the 4500 Series
oers flexibility and economy for use in diverse applications.
4500 SERIES
• Resettable circuit breaker provides overload protection
• 12 receptacles: 10 in back, 2 in front
• Available in 15- or 20-amp versions
• 20-amp versions available with either straight blade or locking input plug
• Easy-access on/o rocker switch
• Mounts horizontally on 19" racks or cabinets
• Physical dimensions: 1.75" H x 19" W x 3" D
NEMA
L5-20P 120V
5-20P 120V
NEMA
5-15P 120V
NEMA
INPUT PLUG TYPES OUTPUT RECEPTACLE TYPES
NEMA
5-15R 120V
NEMA
5-20R 120V
D14
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
power distribution
POWER
MANAGED SOLUTIONS
SECTION
E
D2
SECTION ECONTENTS
INTACT™
INTELLIGENT PORT
MANAGEMENT
SYSTEM
E3 Introduction
E4 Software & Hardware
E5 System Components
E6 Patch Cords & Port Blockers
INTACT™ | Introduction
INTACT INTELLIGENT PORT MANAGEMENT SYSTEM
The Intact Intelligent Port Management System offers a simple, straightforward way
to manage network changes. It provides real-time network documentation with alerts
for faults or unplanned changes to ports. By focusing on the core change management
processes used every day, Intact reduces the complexity found in other systems.
• Receive and maintain accurate, up-to-date network documentation
• Identify and diagnose problems faster, reducing downtime and risk of human error
• Assist technicians through changes and troubleshooting by managing work orders,
logging events, and creating visual network topologies
HOW INTACT WORKS
A microchip is attached to
the Intact Patch Cord plug,
programmed with information
unique to each cord.
Intact Intelligent Panels
monitor port status and
communicate with the
Intact Device Manager.
The Device Manager hosts the
pre-installed Intact Software.
Multiple Device Managers
operate together seamlessly
for larger systems.
Intact Software is accessed
from the corporate network
using Web browsers,
including those on tablets
and smartphones.
E3 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
intact
MANAGED SOLUTIONS
INTACT™ | Software & Hardware
HARDWARE
The Intact system is available for both copper and optical fiber networks. Standard Leviton
patch panels and enclosures can easily be upgraded to Intact intelligent panels, and Intact
copper and fiber patch cords are also based on existing standard product designs. The
added intelligent technology allows the system to monitor the connection status of ports.
Intact is the only system to provide an extra layer of security, with the ability to lock in
patch cords and lock out unused ports. Once plugged in, Intact Secure copper and fiber
patch cords can only be removed with a matching-color extraction tool, deterring any
unauthorized access.
SOFTWARE
Intact software comes pre-loaded on the Device Manager, so there’s no set-up or
configuring. It can be accessed on any Web browser over the corporate network, including
mobile devices like tablets or smartphones. The software manages work orders, event
logging, and visual network topology to assist technicians and IT managers through moves,
adds, changes, and troubleshooting.
E4
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
intact
MANAGED SOLUTIONS
INTACT™ | System Components
BA C
DEF
GH I
FEATURES
• Intact Intelligent Panels send network port status back to the Intact Device Manager, a 1RU Ethernet-enabled
controller that hosts the system software
• During work orders and when alarms occur, LED lights provide guidance above aected ports on the panel
• Using Intact Device Hubs, one Device Manager can expand to support over 100 Intact panels
• Multiple Device Managers operate seamlessly, allowing systems to scale easily
• QuickPort® copper panels (1RU, 24-port) and Opt-X Ultra® fiber enclosures (1RU, 2RU) are “intelligent-ready”
and can be upgraded to become an Intact intelligent device while remaining on the rack
• Panels and enclosures can be upgraded without removing connectors, preserving the integrity of permanent link testing
INTACT INTELLIGENT PORT MANAGEMENT SYSTEM COMPONENTS
DESCRIPTION PART NO.
[A] Intact QuickPort Patch Panel Upgrade Kit, 24-port* 4MKIT-F24
[B] Intact Opt-X Ultra Fiber Upgrade Kit, 36-fiber, Aqua MM LC duplex adapters included* 5RKIT-OM3
[C] Intact Opt-X Ultra Fiber Upgrade Kit, 36-fiber, Blue SM LC duplex adapters included* 5RKIT-OS2
[D] Opt-X Ultra 1RU Enclosure (Intelligent-Ready), empty 5R1UH-S03
[E] Opt-X Ultra 2RU Enclosure (Intelligent-Ready), empty 5R2UH-S06
[F] Flat QuickPort® Patch Panel (Intelligent-Ready), 1RU, 24-port, empty 49255-H24
[G] Intact Device Manager, 1RU, software and C13 to 5-15P power cord included 4MSYS-IDM
[H] Intact Device Hub, includes power supply adapter with U.S. and Euro plug options and 2-meter USB cable 4MSYS-IDH
[I] Intact Device Hub Mounting Bracket 4MSYS-BKT
* = QuickPort panels and Fiber Enclosures are sold separately.
Make to order! INTACT COPPER & INTACT SECURE RJ COPPER PATCH CORD OPTIONS
CORD TYPE SECURE HOUSING COLOR CABLE COLOR CABLE TYPE HOUSING PLACEMENT CABLE LENGTH
• Intact
• Intact Secure
• Transparent White
• Transparent Yellow
• Transparent Orange
• Transparent Red
• Transparent Blue
• Transparent Green
• Transparent Black
• Transparent Purple
• White
• Yellow
• Red
• Blue
• Green
• Grey
• Black
• CAT 6A FTP CM
• CAT 6 UTP CM
FIRST END
• Intact
• Intact Secure RJ
SECOND END
• Intact
• Intact Secure RJ
• Secure RJ
• 3-72 Feet
• 1-22 Meters
For assistance customizing your patch cords, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
New
E5 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
intact
MANAGED SOLUTIONS
Make to order! INTACT FIBER & INTACT SECURE LC FIBER PATCH CORD OPTIONS
FIBER TYPE KEYED COLOR CABLE TYPE / POLARITY TERMINATION CABLE LENGTH
• OM1
• OM2
• OM3
• OM4
• OS2
• White
• Yellow
• Orange
• Red
• Blue
• Green
• Slate
• Black
• Duplex Riser-Rated A to B Polarity
• Duplex Plenum-Rated A to B Polarity
• Duplex Riser-Rated A to A Polarity
• Duplex Plenum-Rated A to A Polarity
FIRST END
• Intact Duplex LC (uniboot)
• Intact Secure Duplex LC (uniboot)
SECOND END
• Intact Duplex LC (uniboot)
• Intact Secure Duplex LC (uniboot)
• Secure Duplex LC (uniboot)
• Duplex LC (uniboot)
• 1-22 Meters
For assistance customizing your patch cords, please visit leviton.com/configurator or call Tech Support at 800.824.3005.
INTACT™ | Patch Cords & Port Blockers
Green (G) Blue (L) Purple (P)Red (R)Orange (O) Yellow (Y) Black (B)White (W)
* = Secure RJ Colors (transparent):
Green (V) Blue (L) Slate (G)Red (R)Orange (O) Yellow (Y) Black (E)White (W)
^ = Secure LC Colors:
ABC
E F
J
D
GIH
PATCH CORD FEATURES
• Intact CAT 6 and 6A RJ patch cords are independently tested and verified by Intertek (ETL) for component performance
• Intact fiber patch cords are available in OM4, OM3, OM2, OM1, and OS2
• Intact Secure RJ and LC cords include a patented locking mechanism that cannot be released without a matching-color
extraction tool
• Intact Secure Port Blockers prevent unauthorized port access and enable ports to be reserved for future use
• Patch cord insertion loss and return loss tested to industry-leading standards for both copper and fiber
INTACT INTELLIGENT PATCH CORDS & PORT BLOCKERS
DESCRIPTION PART NO.
[A] Intact CAT 6 Copper Patch Cord
[B] Intact Secure CAT 6 Copper Patch Cord
[C] Intact CAT 6A Copper Patch Cord
[D] Intact Secure CAT 6A Copper Patch Cord
[E] Intact Fiber Patch Cord
[F] Intact Secure Fiber Patch Cord
[G] Intact Secure RJ Port Blocker MRJPB-00*
[H] Secure RJ Extraction Tool SRJET-00*
[I] Intact Secure LC Port Blocker MLCPB-^LG
[J] Secure LC Extraction Tool with Dust Cap ETRTN-^TL
Customize your patch cords at
leviton.com/configurator
New
E6
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
intact
MANAGED SOLUTIONS
MDU SOLUTIONS
SECTION
F
F2
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
SECTION FCONTENTS
MULTIPLE
DWELLING UNITS
(MDU) SYSTEMS
F3 The Connected Home Network
F5 Populating the Structured
Media® Enclosure
STRUCTURED
MEDIA
F7 Structured Media Enclosures
F11 Concrete-Mountable Structured
Media & RF Transparent Enclosures
F12 Fiber-to-the-Home (FTTH) Solutions
F13 Routers & Switches
F14 Power Supplies & Surge Protection
F15 Mounting Brackets & Patch Cords
F16 Mounting Brackets & Tools
F17 Twist & Mount Patch Panels
F17 Telephone Input
Distribution Panels (TIDP)
F17 Compact Series
Structured Media Panels
F18 Standard Series
Structured Media Panels
F19 Modules & Expansion Boards
F21 Video Distribution & Splitters
F22 Data & A/V Connectors
F23 Renu® Wallplates & Inserts
F24 QuickPort® Wallplates
F25 Decora® Wallplates & Inserts
F26 Cheetah Speed System®
AUDIO F27 In-Wall/Ceiling & Outdoor Speakers
F29 Home Theater Speakers
F30 Volume Controls & Audio
Distribution Modules
F31 Home Theater & Recessed Devices
Find our complete line of residential networking solutions in Leviton’s Connected Home
catalog. Download online at leviton.com/connectedhome.
F3 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
the connected home
MDU
Want to increase occupancy rates and have the preferred property in the neighborhood? Make it easy for
your customers to connect to the world of information, commerce, entertainment, and one another. That’s
where Leviton comes in, offering data, voice, audio, and video network service solutions to exceed your
customers’ expectations.
MDU PROJECTS ARE ONE OF THE FASTEST-GROWING CONSTRUCTION MARKETS TODAY
MDU SYSTEMS | The Connected Home
Apartments and Condos
Welcome to renter nation. Two-thirds of all new
households formed in the next five years will be
renters. Surround your tenants with technology;
make it easy for them to connect.
Hotels and Hospitality
Expectations for hotel technology are the same, if not
greater, than at home. Create a home-like atmosphere
for business travelers and vacationers alike with audio,
video, and high-speed Internet connectivity.
Hospitals and Health Care
Hospital technology is more than medical treatment.
It’s also the comfort and connectivity provided by
familiar things like HDTV and high-speed Internet.
Leviton systems are the value add that can
dierentiate your projects in the market.
Mixed-Use Buildings
Urban infill is in, putting residential, retail, and
commercial in a shared building. A connected
building can be the dierence that attracts business
and residential tenants. Leviton’s enterprise-grade
connectivity systems are the whole building solution
to serve your commercial and residential consumers.
F4
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
the connected home
MDU
Internet Connectivity
Voice, data, audio, and video ports support VoIP, IPTV, HDTV,
Blu-ray™, and streaming music and movies
High-Speed Gaming
Online games and multi-player experience with less lag time
System Security
Structured wiring oers better network security
than wireless
Integrated Home Theater
State-of-the-art distribution, speakers, and control
modules bring the movie theater experience home
Multiroom Audio
A single playlist can be enjoyed in any connected room
Empowered Wi-Fi®
A wireless network within a structured wiring system provides
high-speed connectivity and convenience
OPTIMIZING A HOME NETWORK
Wire Up for Speed, Security, and Reliability
Only a wired connection can deliver gigabit performance.
Wire up gaming consoles, IPTVs, set-top boxes, and any other
stationary appliances for the best possible performance, data
security, and signal reliability.
Go Wireless for Convenience and Mobility
Wireless provides convenient broadband access for mobile
devices. Leviton has developed an innovative and comprehensive
suite of structured wiring products that include gigabit
networking, integrated Wi-Fi, and RF-transparent solutions.
MDU SYSTEMS | The Connected Home
Leviton is providing contractors, developers, and integrators cost-eective solutions to stand out in the
MDU market. Our market-leading residential and commercial structured wiring systems deliver the highest
performance voice, audio, video, and data networks available.
F5 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
populating the structured
media enclosure
MDU
MDU SYSTEMS | Populating the Structured Media® Enclosure
POPULATING THE STRUCTURED MEDIA ENCLOSURE – THE NERVE CENTER OF THE CONNECTED HOME
Get enterprise-grade, best-in-class broadband network performance capability with Leviton Connected
Home components. All Structured Media solutions are engineered to work together, providing a clean and
organized base and simplifying integration from rough-in through line activation.
Telephone Patching and Distribution
Choose from a wide selection of
telephone distribution boards, modules,
or panels for the secure feel and sound
of a telephone landline. Our Telephone
Input Distribution Panel (TIDP) supports
inputs for use with “triple play” modems
and complements the look and simplicity
of our Twist & Mount Patch Panels.
3
23
6
7
8
9
4
5
1
Structured Media Enclosures
These versatile enclosures allow you to
manage and distribute a full range of
voice, data, audio, and video wiring from
one central location. We have enclosure
solutions for wood frame, concrete, and
cinder block construction.
1
Data Patching and Distribution
Leviton oers durable CAT 6 and 5e panels
and modules for data cable distribution.
The high-end Twist & Mount Panel makes
installation easy and provides easy access
for moves, additions, or changes in the
home network.
2
F6
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
populating the structured
media enclosure
MDU
MDU SYSTEMS | Populating the Structured Media® Enclosure
4
Internet Routers and Switches
Leviton has high-speed routers to
share Internet access over a Wide Area
Network (WAN) in the home or oce, and
Ethernet switches to network additional
PCs, printers, and other peripherals
beyond router capacity.
Ultra High-Flex Patch Cords
The structured cabling system you install today will likely
change tomorrow. Ultra High-Flex Patch Cords help make
changes easy. They allow for tighter radius connections and
a cleaner finished appearance inside a dressed Structured
Media Enclosure.
6
Premium and Passive CATV Splitters
Distribute the incoming RF signal
to locations throughout a home via
coaxial cable using Leviton’s passive
CATV splitters, or use Premium
splitters to optimize the performance
of digital cable signals to handle HDTV.
The Premium splitter’s forward-path
internal amplifier provides equal input
and output levels on all ports.
5
Multi-Room Audio
The Hi-Fi 2 Four Source, Four Zone (4x4)
is a quality distributed audio system that
integrates easily inside a Structured
Media enclosure. It is ideal for controlling,
sharing, and listening to audio systems
throughout the home. More information
on the Hi-Fi 4x4 system is available online
at leviton.com/hifi4x4.
7
Integrated Power Supply
Structured cabling systems rely on
active gear that requires low-voltage
power and surge protection. Leviton
oers power supplies with extra plugs
that eliminate the need for bulky power
adapters within enclosures.
8
ISP Modem
(provided by service provider)
The modem converts DSL, cable, or fiber
optic signals for Internet access for triple-
play service or pure data connections.
9
F7 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU | Structured Media® Enclosures
ABC
DEF
GHI
• Enclosures are constructed of white powder-coated
20-gauge steel
• Covers and doors are constructed of white
powder-coated 18-gauge steel, and feature ¾" overlap to
hide irregular drywall cuts
• Modules mount vertically or horizontally
• Multiple knock-outs on top and bottom facilitate cable
entry and routing
• Knock-out in base of enclosure accommodates
single- and double-gang J-boxes and power modules
• Six 3" self-healing foam grommets included to
accommodate and protect cable bundles
• Can be surface mounted or recessed
• Mounting tabs on housing sidewalls prevent enclosure
from falling through the studs during installation
• Combine two or more enclosures for larger installations
or future expansion
• Optional lock and key set available for additional security
• Standards compliance: ACA and cULus Listed
• For enclosure configuration assistance,
go to leviton.com/homeconfig
• ANSI/UL 1863 – Communication Circuit Accessories
• ANSI/UL 985 – Household Fire-Warning System Units
• ANSI/UL 1023 – Household Burglar-Alarm System Units
Leviton Structured Media Enclosures provide a convenient termination location for wiring home runs from
wall outlets, creating a distribution point for voice, data, audio, and video applications. Available in compact,
14", 21", 28", and 42" sizes to address a broad range of capacities for single family homes, MDUs, and light
commercial applications, Leviton Structured Media Enclosures support new and retrofit installations.
STRUCTURED MEDIA ENCLOSURES, COVERS & DOORS
structured media
enclosures
MDU
F8
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU | Structured Media® Enclosures
14" STRUCTURED MEDIA ENCLOSURES, COVERS & DOORS
DESCRIPTION PART NO.
14" Enclosure and Flush-Mount Cover, 15.32" (389.1 mm) H x 15.62" (396.7 mm) W x 3.83" (97.3 mm) D 47605-140
[A] 14" Enclosure, 14.0" (355.6 mm) H x 14.38" (365.3 mm) W x 3.63" (92.2 mm) D 47605-14E
14" Multi-Dwelling Unit Configuration A, Enclosure and Flush-Mount Cover,
15.32" (389.1 mm) H x 15.62" (396.7 mm) W x 3.83" (97.3 mm) D (see page F10 for knock-out configurations) 47605-1MG
[B] 14" Flush-Mount Cover, 15.32" (389.1 mm) H x 15.62" (396.7 mm) W x 0.20" (5.1 mm) D 47605-14C
[C] 14" Economy Hinged Door, 15.32" (389.1 mm) H x 15.62" (396.7 mm) W x 0.25" (6.4 mm) D 47605-14D
14" Premium Hinged Door, 15.32" (389.1 mm) H x 15.62" (396.7 mm) W x 0.25" (6.4 mm) D 47605-14P
14" Premium Vented Hinged Door, 15.32" (389.1 mm) H x 15.62" (396.7 mm) W x 0.25" (6.4 mm) D 47605-14S
14" Enclosure, job packed, 6 per pack, 14.0" (355.6 mm) H x 14.38" (365.3 mm) W x 3.63" (92.2 mm) D 47605-14G
14" Flush-Mount Cover, job packed, 6 per pack, 15.32" (389.1 mm) H x 15.62" (396.7 mm) W x 0.20" (5.1 mm) D 47605-14B
Structured Media Enclosure Lock & Key for 14", 21", 28", and 42" hinged doors 5L000-L0K
21" STRUCTURED MEDIA ENCLOSURES, COVERS & DOORS
[D] 21" Enclosure, 21.0" (533.4 mm) H x 14.38" (365.3 mm) W x 3.63" (92.2 mm) D 47605-21E
[E] 21" Flush-Mount Cover, 22.35" (567.7 mm) H x 15.62" (396.7 mm) W x 0.20" (5.1 mm) D 47605-21C
[F] 21" Premium Vented Hinged Door, 22.35" (567.7 mm) H x 15.62" (396.7 mm) W x 0.25" (6.4 mm) D 47605-21S
Structured Media Enclosure Lock & Key for 14", 21", 28", and 42" hinged doors 5L000-L0K
COMPACT STRUCTURED MEDIA MDU ENCLOSURES
[G] Compact Structured Media Enclosure and Cover, empty,
8.02" (203.7 mm) H x 14.38" (365.2 mm) W x 3.71" (94.2 mm) D 47605-MDU
Compact Structured Media Enclosure Cover only, 15.375" (390.5 mm) H x 9" (228.6 mm) W x .5" (12.7 mm) D 47605-MDC
[H] MDU Kit (Compact Structured Media Enclosure and Cover plus 1x6 Telephone Expansion Board),
8.02" (203.7 mm) H x 14.38" (365.2 mm) W x 3.71" (94.2 mm) D 47604-0F6
[I] MDU Kit (Compact Structured Media Enclosure and Cover plus 1x6 Telephone Expansion Board
and 6-Way 1 GHz Splitter), 8.02" (203.7 mm) H x 14.38" (365.2 mm) W x 3.71" (94.2 mm) D 47604-F6S
14" & 21" ENCLOSURES, COVERS & DOORS
• Entry-level home network enclosures create a central distribution point for low-voltage cabling
• Ideal for apartments, condos, and smaller homes
• 14" enclosure accommodates basic residential networking systems and accessories
• 21" enclosure provides additional room for larger modules and equipment
COMPACT STRUCTURED MEDIA MDU ENCLOSURES
• Economical solution for MDU connectivity
• Flexibility to accommodate a variety of telephone/video distribution configurations
• Available empty with cover or in two pre-configured kits
• Snap-on cover requires no tools or fasteners
• Molded-in brackets provide quick snap-in convenience for expansion boards
• Angled video-splitter shelf for easy installation
• Hosts three expansion boards and one TV splitter
• Constructed of sturdy white ABS molded plastic
• cULus Listed for communications equipment
structured media
enclosures
MDU
F9 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
SPOTLIGHT Choosing Your Structured Media Enclosure Cover or Door
MDU | Structured Media® Enclosures
28" & 42" ENCLOSURES, COVERS & DOORS
• Command central for virtually all technology, including networking, DSL, cable Internet modem,
satellite video, security, VoIP, fax, telephone, intercom, and audio
• Available in MDU and mixed-use configurations
• 28" enclosure accommodates up to 8 distribution modules
• 42" enclosure accommodates up to 12 distribution modules
A
D
B
E
C
F
Flush-Mount
Cover
Screws directly to
enclosure frame.
Economy
Hinged Door
Hinged flange
attaches to left
or right side of
enclosure.
Premium
Hinged Door
Full-frame design
adds durability and
security. Door hinges
from left or right.
Premium Vented
Hinged Door
Full-frame design.
Ventilated door
hinges from left
or right.
structured media
enclosures
MDU
F10
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU | Structured Media® Enclosures
28" STRUCTURED MEDIA ENCLOSURES, COVERS & DOORS
DESCRIPTION PART NO.
28" Enclosure and Flush-Mount Cover, 29.32" (744.7 mm) H x 15.62" (396.7 mm) W x 3.83" (97.3 mm) D 47605-28W
[A] 28" Enclosure, 28.0" (711.2 mm) H x 14.38" (365.3 mm) W x 3.63" (92.2 mm) D 47605-28N
28" Multi-Dwelling Unit Configuration A, Enclosure and Flush-Mount Cover,
29.32" (744.7 mm) H x 15.62" (396.7 mm) W x 3.83" (97.3 mm) D* 47605-2MG
28" Multi-Dwelling Unit Configuration B, Enclosure only,
28.0" (711. 2 mm) H x 14.38" (365.3 mm) W x 3.63" (92.2 mm) D* 47605-M28
28" Flush-Mount Cover, 29.32" (744.7 mm) H x 15.62" (396.7 mm) W x 0.20" (5.1 mm) D 47605-F28
28" Economy Hinged Door, 29.32" (744.7 mm) H x 15.62" (396.7 mm) W x 0.25" (6.4 mm) D 47605-28D
[B] 28" Premium Hinged Door, 29.32" (744.7 mm) H x 15.62" (396.7 mm) W x 0.25" (6.4 mm) D 47605-28P
28" Premium Vented Hinged Door, 29.32" (744.7 mm) H x 15.62" (396.7 mm) W x 0.25" (6.4 mm) D 47605-28S
28" Enclosure, job packed, 3 per pack, 28.0" (711.2 mm) H x 14.38" (365.3 mm) W x 3.63" (92.2 mm) D 47605-28G
28" Flush-Mount Cover only, job packed, 3 per pack, 29.32" (744.7 mm) H x 15.62" (396.7 mm) W x 0.20" (5.1 mm) D 47605-28B
[C] 28" Pre-Fab Back Plate, 25" (635.0 mm) H x 13.5" (342.9 mm) W x 0.38" (9.65 mm) D 47605-2BP
[G] Extender Bracket, 2" depth extension package for 28" Structured Media Enclosures** 47612-28B
Structured Media Enclosure Lock & Key for 14", 21", 28", and 42" hinged doors 5L000-L0K
42" STRUCTURED MEDIA ENCLOSURES, COVERS & DOORS
42" Enclosure and Flush-Mount Cover, 43.32" (1,100.3 mm) H x 15.62" (396.7 mm) W x 3.83" (97.3 mm) D 47605-42W
[D] 42" Enclosure, 42.16" (1,070.8 mm) H x 14.38" (365.3 mm) W x 3.63" (92.2 mm) D 47605-42N
42" Multi-Dwelling Unit Configuration A, Enclosure and Flush-Mount Cover,
43.32" (1,100.3 mm) H x 15.62" (396.7 mm) W x 3.83" (97.3 mm) D* 47605-4MG
42" Multi-Dwelling Unit Configuration B, Enclosure only,
42.16" (1,070.8 mm) H x 14.38" (365.3 mm) W x 3.63" (92.2 mm) D* 47605-M42
42" Flush-Mount Cover, 43.32" (1,100.3 mm) H x 15.62" (396.7 mm) W x 0.20" (5.1 mm) D 47605-F42
42" Economy Hinged Door, 43.32" (1,100.3 mm) H x 15.62" (396.7 mm) W x 0.25" (6.4 mm) D 47605-42D
[E] 42" Premium Hinged Door, 43.32" (1,100.3 mm) H x 15.62" (396.7 mm) W x 0.25" (6.4 mm) D 47605-42P
42" Premium Vented Hinged Door, 43.32" (1,100.3 mm) H x 15.62" (396.7 mm) W x 0.25" (6.4 mm) D 47605-42S
[F] 42" Pre-Fab Back Plate, 40.0" (1,016.0 mm) H x 13.5" (342.9 mm) W x 0.38" (9.65 mm) D 47605-4BP
[G] Extender Bracket, 2" depth extension package for 42" Structured Media Enclosures** 47612-42B
Structured Media Enclosure Lock & Key for 14", 21", 28", and 42" hinged doors 5L000-L0K
Leviton Extender Brackets provide an additional 2" of depth and enhanced
ventilation for active gear within Leviton 28" and 48" Structured Media
Enclosures. The brackets attach between the enclosure and the cover to form a
2" deep, vented frame. The increased depth also allows space for better cable
management and for larger modules, such as audio amplifiers, to be mounted
within the Structured Media Enclosure.
**Extender Bracket (enclosure sold separately)
G
Top
Bottom
Top
Bottom
Knock-out sizes support 1" and 2" commercial conduit.
MDU Configuration A MDU Configuration B
*STRUCTURED MEDIA ENCLOSURE END CAPS
Standard
Top
Bottom
structured media
enclosures
MDU
F11 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU
MDU | Concrete-Mountable Structured Media® & RF Transparent Enclosures
A
CONCRETE-MOUNTABLE STRUCTURED MEDIA ENCLOSURES
Concrete-Mountable Structured Media Enclosures are specially designed for
concrete pour and cinder-block construction methods. Built with stronger metal
to withstand the weight associated with concrete pouring, and protected with
two levels of corrosion resistance, these enclosures meet the differing demands
of global building styles. They feature the Structured Media equipment-mounting
hole pattern, and are compatible with all current covers, doors, and locks.
Specifications & Features
• Designed to withstand added weight during concrete pouring
• Moisture-resistant powder coating binds with treated steel to provide multiple levels of
corrosion protection and durability
• Knock-outs on the top and bottom support conduit up to 1.5" in diameter and facilitate cable
routing and entry
• Power knock-out located on side panel for increased vertical cable routing capacity
• Optional duplex receptacle power box constructed using same steel as enclosures for
protection of electrical wiring components
•
Flush-mount covers and doors overlap ¾" to hide uneven concrete/mortar finishing (sold separately)
• Durable powder coating withstands ⅛" dent test for cured flexibility (per ASTM D 522-93A
standard) for minimized scratching, cracking, or peeling during shipping or installation
CONCRETE-MOUNTABLE STRUCTURED MEDIA ENCLOSURES
DESCRIPTION PART NO.
Concrete-Mountable Structured Media Enclosure, 21" 48605-21E
[A] Concrete-Mountable Structured Media Enclosure, 28" 48605-28E
Concrete-Mountable Structured Media Enclosure, 42" 48605-42E
Concrete-Mountable Structured Media Duplex Receptacle Power Box 48605-2GP
RF TRANSPARENT ENCLOSURE
• Expands the reach of wireless signals by diminishing the eect of interference
with the ABS polymer construction
• Reduces installation and repair downtimes, and improves system access with
a 180º hinged cover, allowing for quick and easy access to network equipment
• Makes servicing and expansion easy with twelve 1" entry/exit ports
and additional ¼" knock-outs and conduit adapters
• Compatible with most Leviton Connected Home patch panels, voice, data, video,
and audio quick-connect distribution modules
• Ensures safety with UL Compliant ABS flame-retardant polymer
• Vented for cooling
RF TRANSPARENT STRUCTURED MEDIA ENCLOSURE
DESCRIPTION PART NO.
[B] RF Transparent Structured Media Enclosure with Door, 30" 49605-30W
B
New
New
This integrated network system delivers a seamless experience
that combines the wired performance of Gigabit Ethernet with the
mobile-ready convenience of Wi-Fi® networking inside an innovative
RF Transparent Structure Media enclosure.
47611-WG4
concrete-mountable & RF
transparent enclosures
F12
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU
MDU | Fiber-to-the-Home (FTTH) Solutions
FIBER-TO-THE-HOME SOLUTION
DESCRIPTION PART NO.
[A] FTTH Point of Entry Box, 3.94" (100 mm) H x 3.15" (80 mm) W x .84" (21 mm) D UFTH00-00W
MULTI-BAY ENCLOSURES
14" + 14" Dual Multi-Bay Enclosure, 29.64" (752.8 mm) H x 14.30" (363.2 mm) W x 3.63" (92.2 mm) D 47FTH-440
[B] 28" + 14" Dual Multi-Bay Enclosure, 46.64" (1,184.6 mm) H x 14.30" (363.2 mm) W x 3.63" (92.2 mm) D U47FTH-840
28" + 14" + 14" Triple Multi-Bay Enclosure, 59.22" (1,504.1 mm) H x 14.30" (363.2 mm) W x 3.63" (92.2 mm) D 47FTH-844
42" + 14" Dual Multi-Bay Enclosure, 57.64" (1,464.1 mm) H x 14.30" (363.2 mm) W x 3.63" (92.2 mm) D 47FTH-420
14" + 14" + 14" Triple Multi-Bay Enclosure, 45.22" (1,148 mm) H x 14.30" (363.2 mm) W x 3.63" (92.2 mm) D U47FTH-240
[C] 28" + 28" Dual Multi-Bay Enclosure, 57.64" (1,464.1 mm) H x 14.30" (363.2 mm) W x 3.63" (92.2 mm) D 47FTH-880
Note: See pages F7-F10 for covers and doors. U = Minimum order quantity and lead times may apply.
B C
FTTH POINT OF ENTRY BOX
The Fiber-to-the Home (FTTH) Point of Entry Box provides a
location to terminate fiber coming from a service provider to
pigtails at the subscriber’s premises. It’s a convenient staging
demarcation point with quick and easy access for activation as
residents request FTTH service.
• Provides convenient staging prior to terminating incoming fiber
from service provider
• Can mount inside the Structured Media® enclosure or as a stand-alone
unit on a wall
• Includes magnet for easy installation and place adjustments
• Includes an SC/APC adapter with two dust caps and two splice sleeves
• Made of ABS plastic
MULTI-BAY FTTH ENCLOSURES
Multi-Bay Enclosures provide excellent termination and mounting
locations for both in-home structured wiring and fiber-to-the-home
(FTTH) components. Structured wiring components typically
mount in the upper section of the dual enclosure and optical
network termination (ONT) mounts in the lower section. The dual
enclosure can be surface-mounted or mounted between metal
or wood wall studs using provided screws.
Specifications & Features
• Allow separate lockable sections for FTTH integration
• In a separate bay, a full Leviton structured wiring system can be easily
connected and optimized up to gigabit speeds to maximize incoming
fiber optic connection
• Ideal for new installations or retrofits
• Use multiple covers or doors to provide access and security
• Flush-mount cover, economy, premium, and premium vented
doors available
A
fiber-to-the-home
(FTTH) solutions
F13 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU
MDU | Routers & Switches
100 MBPS ROUTER
• 10/100 Mbps data transfer rate
• Enables multiple users to share a single, secure high-speed Internet connection
• Includes four ports for in-home LAN connections
• LEDs indicate power, status, LINK/Activity, 100 Mbps, and WAN
• Built-in NAT firewall provides secure communication for network users
• Customizes Web access and filters unwanted sites with URL blocking feature
•
UPnP (universal plug-n-play) allows automatic discovery and configuration of the Gateway; UPnP supported by Windows XP
®
or later
GIGABIT ROUTER
•
Compliant with IEEE 802.11a/b/g/n dual band (2.4G & 5G simultaneously) wireless technology capable up to 300+300 Mbps data rate
• Advanced security: 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK (TKIP/AES encryption)
• Supports Wi-Fi® Protected setup (WPS), NAT firewall, IP/port/URL-based access control, and MAC address filtering
• Includes Gigabit RJ-45 ports (10/100/1000 Mbps) of 1 WAN and 4 LAN ports
• Supports dual-SSID to access dierent networks through a single AP
• Supports NTP, Virtual Server, UPnP, and DMZ for various networking applications
• Includes USB port for sharing printers and USB mass storages
• Includes bracket for mounting in Structured Media® enclosures
GIGABIT ETHERNET SWITCHES
• 10/100/1000 Mbps data transfer rate
• Power button arrows for easy power down
•
LEDs indicate power; LINK/Activity; and 10, 100, or 1000 Mbps
• Plug-n-play installation
• Auto detect uplink to easily cascade additional hubs, switches, and routers from any port
• Features high-performance, store-and-forward switching architecture with CRC
100 MBPS ETHERNET SWITCHES
• 10/100 Mbps data transfer rate
• Network additional PCs, printers, and other peripherals beyond router capacity
• Connects to many home oce Ethernet devices
• Available in 5- and 8-port versions
DATA NETWORKING ROUTERS & SWITCHES
DESCRIPTION PART NO.
[A] 100 Mbps 4-Port Internet Router, 2.52" (64 mm) H x 6.50" (165.1 mm) W x 3.54" (89.9 mm) D 47611-GT4
[B] Gigabit 4-Port Router and 300 Mbps Dual-Band Wi-Fi, 6.76" (171.61 mm) H x 4.38" (111.16 mm) W x 1.01" (25.47 mm) D 47611-WG4
[C] 100 Mbps 5-Port Ethernet Switch, 2.52" (64 mm) H x 6.50" (165.1 mm) W x 3.54" (89.9 mm) D 47611-5PT
[D] 100 Mbps 8-Port Ethernet Switch, 2.52" (64 mm) H x 6.50" (165.1 mm) W x 3.54" (89.9 mm) D 47611-8PT
[E] Gigabit 5-Port Ethernet Switch, 2.52" (64 mm) H x 6.50" (165.1 mm) W x 3.54" (89.9 mm) D 47611-5GB
Gigabit 8-Port Ethernet Switch, 2.52" (64 mm) H x 6.50" (165.1 mm) W x 3.54" (89.9 mm) D 47611-8GB
DCA EB
New
New
routers & switches
F14
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU
MDU | Power Supplies & Surge Protection
POWER SUPPLIES
DESCRIPTION PART NO.
[A] Surge J-Box Kit, one duplex receptacle, wallplate 47605-ACS
Non-Surge J-Box Kit, one duplex receptacle, wallplate 47605-ACN
[B] Surge AC Power Module, two duplex receptacles 47605-0DP
Non-Surge AC Power Module, two duplex receptacles 47605-NDP
[C] DC Bus Module, 12 VDC and 24 VDC 48212-124
[D] Versatile Power Supply, six 12 VDC connectors and two NEMA 15A receptacles 47605-PSC
[E] AC Surge Module, six receptacles 48212-06S
[F] Universal Mini DC Power Supply, three 12 VDC connectors 47605-PSB
[G] Universal DC Power Supply, nine 12 VDC connectors and one IEC AC receptacle 47605-PSA
IEC TO NEMA 15A Adapter Power Cord, 12" (accessory for 47605-PSA) 48212-IEC
F, GDE
SURGE-PROTECTION, STANDARD AC POWER
MODULES & J-BOX KITS
• Fit in standard 14", 21", 28", and 42"
Structured Media® Enclosures
• Surge-protected versions provide enhanced protection
and EMI/RFI filtering per UL 1449 standards
DC BUS MODULE
• Eliminates need for more than two bulky AC/DC
power adapters
• Contains six 12 VDC power outputs at up to
1500 mA total
• Contains three 24 VDC power outputs at up to
1000 mA total including one F-connector
• Output power cables included for all except 24 VDC
F-connector connection
VERSATILE DC POWER SUPPLIES
• 120 VAC – 60 Hz input
• Provides 12 VDC outputs with surge protection
at 3.34A total
• Includes NEMA 5-15 AC receptacles at 15A total
• Eliminates the need for multiple bulky AC/DC
power adapters
AC SURGE MODULES
• Includes six surge-protected NEMA 5-15P receptacles
• Allows six AC/DC power adapters to fit easily into
Structured Media Enclosures
• Powers routers, switches, modems, volume controls,
camera hubs, and other Structured Media
mounted devices
UNIVERSAL MINI DC POWER SUPPLIES
• 90 - 264 VAC – 50/60 Hz input
• Provides three 12 VDC outputs with surge protection
at 833 mA total
• Eliminates the need for multiple bulky AC/DC
power adapters
UNIVERSAL DC POWER SUPPLIES
• 100 - 240 VAC – 50/60 Hz input
• Provides nine 12 VDC outputs with surge protection
at 3.34A total
• Includes one IEC AC power receptacle
• Eliminates the need for multiple bulky
AC/DC power adapters
BCA
power supplies
F15 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU
MOUNTING BRACKETS
DESCRIPTION PART NO.
[A] Single Plastic Bracket, for single expansion board, white 47612-SBK
[B] Standard (12" width) Expansion Plastic Bracket,
for up to five expansion boards, white 47612-EBK
Shelf Plastic Bracket, for up to three expansion boards
and CATV splitter, white (compact width) 47612-VSB
[C] Compact (6" width) Expansion Plastic Bracket,
for up to three expansion boards, white 47612-HBK
[D] Data Plastic Bracket, for mounting routers and switches 47612-DBK
[E] 12-Port QuickPort Mounting Bracket 47600-QPB
MDU | Mounting Brackets & Patch Cords
DBC
GH I J
A
F
MULTIMEDIA ADAPTER BRACKET
& MOUNTING PLATES
• Bracket is constructed of white
powder-coated steel
• Plates are constructed of black
powder-coated steel
• Bracket includes push-lock pins for
mounting in Structured Media Enclosures
HOME 5E PATCH CORDS
• Low-profile High-Flex Patch Cords
allow tighter radius connections
• Available in five lengths and two colors
MULTIMEDIA ADAPTER BRACKET & MOUNTING PLATES
DESCRIPTION PART NO.
[G] Multimedia Adapter Bracket 47612-MMA
[H] BNC Mounting Plate, 6-pack, loaded 5F100-BNC
[I] F-Connector Mounting Plate, 6-pack, loaded 5F100-6VF
[J] QuickPort Mounting Plate, 6-pack, unloaded 5F100-6QP
White (W) Blue (L)
HOME 5E® PATCH CORDS
DESCRIPTION PART NO.
[F] High-Flex Home 5e Patch Cord 5HHOM-xx*
8-Conductor Flat Telephone Patch Cord, 8" long 42400-8FG
xx = Length: 6" (6I), 1' (01), 2' (02), 3' (03), or 4' (04)
* = Colors: Choose from either of the colors below.
E
MOUNTING BRACKETS
• Made of sturdy white ABS plastic
• Include push-lock pins
• Snap-in installation in any Leviton 14", 21",
28", or 42" Structured Media® Enclosure
• Allow for cable management via routing
under bracket
•
12-port bracket made of black polycarbonate
• 12-port bracket accepts
all QuickPort® connectors
mounting brackets
& patch cords
F16
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU
MDU | Mounting Brackets & Tools
RESIDENTIAL TOOLS
DESCRIPTION PART NO.
[G]
Residential Tool Kit includes Punchdown
Tool w/ 110 blade, EZ-RJ45® Crimp Tool,
two Level Coaxial Cable Strippers, UTP
Stripping Tool, Coax and Round Wire Cable
Cutter, EZ-RJ45 Connectors,
and screwdriver
40812-RTK
Wire Punchdown / Termination Tool, blades
sold separately 49553-814
110 IDC Blade 49553-110
66-Clip Blade 49553-066
BIX® Blade 49553-BIX
Krone® Blade 49553-KRN
Awl (woodscrew starter punch) 49553-AWL
Master Compression Tool 40989-CPT
UTP Stripping Tool 49660-00P
Coaxial Stripping Tool C5914-000
EZ-RJ45 Crimp Tool 40989-ACT
UNIVERSAL SECURITY & SHELF BRACKETS
• Universal Shelf Bracket allows security batteries
and other active products to be mounted inside any
Structured Media® Enclosure
• Shelf Bracket includes four 8" long VELCRO® Brand
strips, ensuring vertical and horizontal stability
• Universal Security Board Mounting Plate includes four
adhesive clips for mounting within any Leviton Structured
Media Enclosure
• Combo Bracket allows Leviton products to be installed in
most non-Leviton structured wiring enclosures
• Universal Mounting Brackets allow an unlimited number
of upgrades (limited only by enclosure size) to be added
to an existing security system terminated within any
Leviton Structured Media Enclosure
• Universal Brackets are sold in pairs with self-tapping
screws and spacers to easily connect the largest number
of security alarm manufacturers’ panels
UNIVERSAL SECURITY & SHELF BRACKETS
DESCRIPTION PART NO.
[A] Universal Shelf Bracket 47612-UBK
[B] Compact (6" width) Universal Security
Board Mounting Plate 47612-HSB
[C] Standard (12" width) Universal Security
Board Mounting Plate 47612-FSB
[D] Combo Bracket 47612-CBK
[E] Compact (6" width) Universal
Mounting Bracket 47612-6SB
[F] Standard (12" width) Universal
Mounting Bracket 47612-1SB
E
FB, C DA
RESIDENTIAL ACCESSORIES
DESCRIPTION PART NO.
EZ-RJ45 Connector, 50/pack 47613-EZC
EZ-RJ45 Connector Display Pack, 10/pack 47613-EZR
Push-Lock Pins for Structured Media
Enclosures, 20/pack 47615-NYL
Reclosable Tie-Wrap, 5" Length, 25/pack 43105-005
G
mounting brackets
& tools
F17 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU
SPOTLIGHT Compact vs. Standard Structured Media Panels
PRE-CONFIGURED COMPACT STRUCTURED MEDIA PANELS
• Compact series (6" width) pre-configured panels are an ideal solution for basic telephone, data, security interface,
and TV distribution in MDUs where space and budget are of primary concern
• Space-saving profile provides four to nine bridged telephone connections, up to four CAT 5e data connections,
and up to eight video connections
MDU | Twist & Mount, TIDP & Compact Structured Media® Panels
TWIST & MOUNT PANELS & TELEPHONE DISTRIBUTION PANELS
DESCRIPTION PART NO.
Twist & Mount Patch Panel – 12 ports each of CAT 6 and CAT 5e (24 ports total) 476TM-654
[A] Twist & Mount Patch Panel – 24 ports of CAT 6 476TM-624
Twist & Mount Patch Panel – 24 ports of CAT 5e 476TM-524
Twist & Mount Patch Panel – 6 ports each of CAT 6 and CAT 5e (12 ports total) 476TM-652
Twist & Mount Patch Panel – 12 ports of CAT 6 476TM-612
[B] Twist & Mount Patch Panel – 12 ports of CAT 5e 476TM-512
[C] Telephone Input Distribution Panel (TIDP) 476TL-T12
TWIST & MOUNT PATCH PANELS
• Low-profile, high-density, component-rated patching
for both voice and gigabit ethernet connections
• Feature simple twist and mount installation
• Universal T568A and T568B wiring labels ensure
compatibility in residential and commercial installations
• Available in 12- and 24-port versions
TELEPHONE INPUT DISTRIBUTION PANELS (TIDP)
• Supports four-line telephone distribution
• Oers choice of inputs and outputs: one 4-pair 110-style
IDC input, four industry-standard RJ-11 jack inputs, or 12
modular industry-standard RJ-45 jack outputs
• Security jack for interface with security systems
• Test and auxiliary disconnect outlet (ADO) ports for
isolation and testing of telephone line connections
PRE-CONFIGURED COMPACT STRUCTURED MEDIA PANELS - COMPACT WIDTH (6")
DESCRIPTION PART NO.
1x9 Bridged Telephone and 4-way 1 GHz TV Splitter 47603-1G4
[D] 1x9 Bridged Telephone and 6-way 1 GHz TV Splitter 47603-1G6
1x9 Bridged Telephone and 8-way 1 GHz TV Splitter 47603-1G8
[E] 1x4 Bridged Telephone, 4 Data, and 6-way 1 GHz TV Splitter 47603-DP6
1x7 Bridged Telephone, Security Interface, and 6-way 1 GHz TV Splitter 47603-TSV
EBA CD
Compact Standard
Compact Structured Media Panels' space-saving profile is half the size of
standard panels, and is ideal when space and budget is a primary concern.
Standard Structured Media Panels combine multiple modules into a
simple distribution point, and provide greater versatility when it comes time
for customization or expanding.
panels
F18
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU
MDU | Standard Structured Media® Panels
D
H
AC
G
B
FE
PRE-CONFIGURED STANDARD STRUCTURED MEDIA PANELS
• Standard series (12" width) pre-configured panels combine voice, data, and TV modules into a single,
simple distribution point
• Several pre-configured options are available with room for customization with additional expansion boards
PRE-CONFIGURED STANDARD STRUCTURED MEDIA PANELS
DESCRIPTION FEATURES PART NO.
[A] Basic Telephone & Video Panel - One 1x9 Bridged Telephone Board
- One 6-way 2 GHz TV Splitter 47606-BTV
[B] Basic Home Networking Plus Panel
- One Telephone Patching Board
- One CAT 5e Voice & Data Board
- Six 4-line telephone connections
- One 6-way 2 GHz TV Splitter
47606-BNP
Advanced Home Telephone
& Video Panel
- One Telephone Line Distribution Board
- 19 multi-line telephone connections (in various combinations of two or four lines)
- One CAT 5e Voice & Data Board
- One 6-way 2 GHz TV Splitter
47606-AHT
[C] Advanced Home Oce Panel
- One Telephone Line Distribution Board
- 19 multi-line telephone connections (in various combinations of two or four lines)
- Two CAT 5e Voice & Data Boards
- One 6-way 2 GHz TV Splitter
47606-ASO
12-Port Structured Media Panel
- One Telephone Line Distribution Board
- 19 multi-line telephone connections (in various combinations of two or four lines)
- Two CAT 5e Voice & Data Boards
47603-12P
[D] 18-Port Structured Media Panel
- One Telephone Line Distribution Board
- 19 multi-line telephone connections (in various combinations of two or four lines)
- Three CAT 5e Voice & Data Boards
47603-18P
[E] 24-Port Structured Media Panel
- One Telephone Line Distribution Board
- 19 multi-line telephone connections (in various combinations of two or four lines)
- Four CAT 5e Voice & Data Boards
47603-24P
[F] 4x12 Telephone Distribution Panel - One 4x12 Telephone Distribution Board 47603-12M
4x12 Telephone Distribution Panel
w/ Splitter
- One 4x12 Telephone Distribution Board
- One 8-way 2 GHz TV Splitter 47603-412
[G] 4x18 Telephone Distribution Panel - One 4x18 Telephone Distribution Board 47603-18M
[H] 4x18 Telephone Distribution Panel
w/ CAT 5e Board
- One 4x18 Telephone Distribution Board
- One CAT 5e Voice & Data Board 47603-8C1
panels
F19 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU
MDU | Modules & Expansion Boards
MODULES
DESCRIPTION PART NO.
[A] 1x9 Bridged Telephone Module 47689-00B
[B] CAT 5e Voice & Data Module 47605-C5B
[C] CAT 6 Voice & Data Module 47611-C6B
[D] DSL Filter Module 47616-DSF
Telephone Security Module 47609-TSV
EXPANSION BOARDS
DESCRIPTION APPLICATION FEATURES PART NO.
[E] CAT 5e Voice and
Data Board
Data, Telephone,
Fax, Modem
- Patch phone or data connections to six locations
- Combine with a TLDM, key system, or network switches
- 4-pair 110-type IDC punchdowns
- Six CAT 5e RJ-45 ports
- Printed circuit board
47603-0C5
[F] CAT 6 Voice and
Data Board
Data, Telephone,
Fax, Modem
- TIA-568-C channel-rated for gigabit Ethernet
- Combine with gigabit Internet router or Ethernet switch
4-pair 110-type IDC punchdowns and six CAT 6 connectors
47611-0C6
[G]
VDSL Board w/
1x5 Bridged Phone w/
Data Passthrough IDCs
Data, Telephone,
Modem
- Bridge up to four telephone lines to five locations
- Connect up to five separate telephones per line
- IDC connectors for CAT 5 or CAT 5e wire
- Termination point and pass-through for a data
connection via IDCs up to 150 MHz
47609-D5P
[H]
Combo Phone & Data Board w/
1x4 Bridged Phone and 4-Port
CAT 5e
Data, Telephone
- Provides data and phone connections on a single board
- 1x4 phone portion provides four telephone lines to up to
four locations via IDC punchdowns
- Four ports of CAT 5e 150 MHz data connections via modular
RJ-45 connectors and 4-pair 110-type IDC punchdowns
47609-4DP
Pre-configured Structured Media Panels Module
Expansion
Board
EBA C DFGH
Pre-configured Structured Media® Panels include
multiple expansion boards combining voice, data,
and TV boards into a single distribution point.
Modules include an expansion board on a single
ABS mounting bracket.
Expansion Boards mount in Structured Media
Panels or Mounting Brackets (see page F15).
SPOTLIGHT Panels, Modules, Boards: What’s the difference?
modules &
expansion boards
F20
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU
MDU | Expansion Boards
EXPANSION BOARDS (CONTINUED)
DESCRIPTION APPLICATION FEATURES PART NO.
[A] 1x9 Bridged Telephone Board Telephone,
Fax, Modem
- Bridge up to four telephone lines to nine locations
- Connect up to nine separate telephones per line
- Printed circuit board
- 4-pair 110-type IDC punchdowns
47603-110
[B] 1x6 Bridged Telephone Board Telephone,
Fax, Modem
- Bridge up to four telephone lines to six locations
- Connect up to six separate telephones per line
- Printed circuit board
- IDC connectors for CAT 5 or CAT 5e wire
- RJ-45 expansion port
47609-0F6
[C] 1x10 Bridged Telephone Board Telephone,
Fax, Modem
- Bridge up to six telephone lines to 10 locations
- Connect up to 10 separate telephones per line
- Printed circuit board
- IDC connectors for CAT 5 or CAT 5e wire
- Security port
- Punchdown security interface to accommodate
alarm systems
47609-S10
[D] 1x4 Bridged Telephone Board Telephone,
Fax, Modem
- Bridge up to four lines to four locations via
IDC punchdowns 47609-004
[E]
Telephone Patching Board/
Expanded 4-line Telephone
Distribution
Telephone,
Fax, Modem
- Bridge up to four telephone lines to seven locations
- Printed circuit board module
- One incoming 4-pair 110-type IDC punchdown
- Seven outgoing RJ-45 connector connections
- Combine with a CAT 5e board to route telephone to
remote locations
47609-EMP
DSL Filter Board Telephone, Modem
- Filters DSL signal from phone line before
distribution throughout home or oce
- Eliminates need for individual filters at wallplate
- Use with any phone distribution module
- Printed circuit board module w/ RJ-45 connector
and 110-type punchdown
47616-DSF
Telephone Line
Distribution Board
Telephone, Fax,
Modem
- 19 multi-line telephone connections in
combinations of two or four lines
- Bridge “line 1” service to 12 locations and four-line
service to eight locations
- Connect to CAT 5e Voice & Data Board(s) or
additional panels for more connections and easier
moves/adds/changes
- Independent RJ-45 connector and punchdown
security interface to accommodate alarm systems
47603-TDM
[F] 4x12 Telephone
Distribution Board Telephone, Fax - Bridge up to four telephone lines to 12 locations 47603-12B
[G] 4x18 Telephone
Distribution Board Telephone, Fax - Bridge up to four telephone lines to 18 locations 47603-18B
EFGBA C D
expansion boards
F21 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU
MDU | Video Distribution & Splitters
PREMIUM AMPLIFIED CATV/HDTV MODULE
• Split and/or amplify signal to 1, 8, or 16 TVs throughout the home
• Bi-directional circuitry supports advanced interactive applications, as well as standard TV and video inputs
• Forward path internal amplifier provides equal input and output level on all ports; reverse path is not affected
• Unity gain eliminates the need to manually adjust attenuation
• HDTV and digital cable ready, SCTE- and DOCSIS-compliant
3X1 PASSIVE COMBINER MODULE
• Digital CATV compatible
• Provides bi-directional signal path to support cable modem or digital cable communications
• F-ports provide up to 15 psi weather sealing
PASSIVE CATV/HDTV SPLITTERS
• Split signal to 4, 6, or 8 TVs throughout the home
• Provide digital cable, cable TV, and other TV services via coaxial cable
• Lightweight, strong die-cast housing
• HDTV and digital cable ready SCTE-compliant
• Available with and without Structured Media® Enclosure mounting bracket
PREMIUM MODULES
DESCRIPTION 1 GHZ
[A] 1x1 Premium Video Module 47693-01P
[B] 1x8 Premium Video Module 47693-08P
[C] 1x16 Premium Video Module 47693-16P
[D] 3x1 Passive Combiner 47693-31P
PASSIVE SPLITTERS W/ MOUNTING BRACKET
DESCRIPTION 1 GHZ 2 GHZ
[E] 1x4 Passive Video Splitter w/ bracket for 14", 21", 28", and 42" Structured Media Enclosures 47690-04C 47690-4C2
[F] 1x6 Passive Video Splitter w/ bracket for 14", 21", 28", and 42" Structured Media Enclosures 47690-06C 47690-6C2
[G] 1x8 Passive Video Splitter w/ bracket for 14", 21", 28", and 42" Structured Media Enclosures 47690-08C 47690-8C2
PASSIVE SPLITTERS
DESCRIPTION 1 GHZ 2 GHZ
[H] 1x4 Passive Video Splitter 47690-004 47690-0G4
[I] 1x6 Passive Video Splitter 47690-006 47690-0G6
[J] 1x8 Passive Video Splitter 47690-008 47690-0G8
A
B
C
D
EF
G
J
H
I
video distribution
F22
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU
DATA & A/V CONNECTORS
DESCRIPTION APPLICATIONS PART NO.
QuickPort® CAT 5 Connector Voice and low-speed data 41108-R‡5
QuickPort CAT 3 Connector Voice and low-speed data 41108-R‡3
[A] QuickPort GigaMax® CAT 5e Connector High-speed data 5G108-R‡5
QuickPort Voice-Grade 6-Conductor Connector Voice 41106-R‡6
QuickPort Voice-Grade 8-Conductor Connector Voice 41108-R‡8
[B] QuickPort BNC Bulkhead Module, standard CCTV and video 41084-B*F
[C] QuickPort BNC Bulkhead Module, gold plated CCTV and video 40832-0B°
[D] QuickPort HDMI Passthrough TV, DVD, satellite, and home theater 40834-00#
QuickPort S-Video Feedthrough Enhanced video streams 40734-CV~
[E] QuickPort USB A-A Connector, feedthrough Computers and peripherals 40835-00~
[F] QuickPort 3.5 mm Stereo, screw terminal Computer audio 40839-S~S
[G] QuickPort F-Connector, standard, 3.0 GHz TV, DVD, satellite, and home theater 41084-F*F
[H] QuickPort F-Connector, gold plated, 3.0 GHz TV, DVD, satellite, and home theater 40831-0B°
QuickPort RCA to 110 Advanced audio and video 40735-Rx†
QuickPort RCA w/ black stripe Advanced audio and video 40830-B*E
QuickPort RCA w/ red stripe Advanced audio and video 40830-B*R
QuickPort RCA w/ yellow stripe^ Advanced audio and video 40830-B°Y
QuickPort RCA w/ green stripe Advanced audio and video 40830-B~V
QuickPort RCA w/ blue stripe Advanced audio and video 40830-B~L
QuickPort Banana Jack Adapter, gold plated w/ black stripe Advanced audio 40837-B°E
QuickPort Banana Jack Adapter, gold plated w/ red stripe Advanced audio 40837-B°R
[I] QuickPort Binding Post Adapter, gold plated w/ black stripe Advanced audio 40833-B°E
[J] QuickPort Binding Post Adapter, gold plated w/ red stripe Advanced audio 40833-B°R
QuickPort Snap-in Blank Module Secures unused ports 41084-B*B
[K] QuickPort Compression RCA Connector Advanced audio and video 40782-R•W
[L] QuickPort Compression F-Connector (white only) TV, DVD, satellite, and home theater 40782-CPF
[M] RCA Compression Connector (colored rings included) CCTV and video 40985-CRU
[N] Compression F-Connector CCTV and video 40985-CPF
Green (V) Blue (L)Purple (P)Crimson (C) Dark
Red (R)
Orange (O) Yellow (Y)
Black (E)
Ivory (I) Grey (G)Light
Almond (T) Brown (B)White (W)
MDU | Data & A/V Connectors
^ = Minimum order quantity and lead times may apply.
~ = Color: White (W), Ivory (I)
x = Inner Barrel Color: Orange (O), Red (R), White (W), Yellow (Y)
† = Color: White (W), Light Almond (T), Ivory (I), Grey (G), Black (E)
• = Inner Barrel Color: Black (E), Yellow (Y), Red (R), Blue (L), Green (V)
‡ = Color: Choose from any of the 13 colors shown at right.
* = Color: White (W), Light Almond (T), Ivory (I), Grey (G), Black (E), Brown (B)
° = Color: White (W), Light Almond (T), Ivory (I)
# = Color: White (W), Light Almond (T), Ivory (I), Black (E)
M, NI, J
B, C E
K, L
A
G, H
FD
data & a/v
connectors
F23 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU
Renu is Leviton’s smart electrical and data connectivity screwless wallplate system. These QuickPort®
compatible wallplates snap on and o quickly and easily with no tools, simplifying installation and ongoing
maintenance. Choose from wallplates and inserts in White On White, Navajo Sand, and Onyx Black.
RENU WALLPLATES AND INSERTS
• Screwless wallplates easily snap on to any Renu insert or device
• Inserts accept all QuickPort connectors
• Slightly larger size covers wall imperfections
• Tongue and groove design simplifies alignment in multi-gang installations
• Adapter ring allows use of Decora® device with Renu wallplates
• Available in three standard colors to coordinate with the commercial-grade QuickPort line (white, light almond, black)
• Additional wallplate colors for switches, dimmers, and outlets available; visit leviton.com/renu
• cULus Listed
RENU WALLPLATES & INSERTS
DESCRIPTION WHITE
ON WHITE NAVAJO SAND ONYX BLACK
[A] Snap-In Blank Module RE640-BWW RE640-BNS RE640-BOB
Four-Gang Wallplate REWP4-0WW REWP4-0NS REWP4-0OB
Three-Gang Wallplate REWP3-0WW REWP3-0NS REWP3-0OB
[B] Dual-Gang Wallplate REWP2-0WW REWP2-0NS REWP2-0OB
[C] Single-Gang Wallplate REWP1-0WW REWP1-0NS REWP1-0OB
[D] 6-Port Insert RE640-WW6 RE640-NS6 RE640-OB6
[E] 4-Port Insert RE640-WW4 RE640-NS4 RE640-OB4
3-Port Insert RE640-WW3 RE640-NS3 RE640-OB3
[F] 2-Port Insert RE640-WW2 RE640-NS2 RE640-OB2
1-Port Insert RE640-WW1 RE640-NS1 RE640-OB1
MDU | Renu® Wallplates & Inserts
Onyx
Black
Navajo
Sand
White On
White
BC FEDA
Renu Wallplate and 2-Port Insert
with QuickPort Connectors
renu wallplates
& inserts
F24
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU
MDU | QuickPort® Wallplates
QUICKPORT ANGLED WALLPLATES
DESCRIPTION WHITE LIGHT
ALMOND IVORY
4-Port Wallplate 41081-4WP 41081-4TP 41081-4IP
[A] 2-Port Wallplate 41081-2WP 41081-2TP 41081-2IP
[B] 4-Port Wallplate w/ ID window 42081-4WS 42081-4TS 42081-4IS
2-Port Wallplate w/ ID window 42081-2WS 42081-2TS 42081-2IS
QUICKPORT FLUSH-MOUNT WALLPLATES
[C] 6-Port Flush Mount, polybag, standard carton 41080-6WP 41080-6TP 41080-6IP
4-Port Flush Mount, polybag, standard carton 41080-4WP 41080-4TP 41080-4IP
[D] 3-Port Flush Mount, polybag, standard carton 41080-3WP 41080-3TP 41080-3IP
2-Port Flush Mount, polybag, standard carton 41080-2WP 41080-2TP 41080-2IP
1-Port Flush Mount, polybag, standard carton 41080-1WP 41080-1TP 41080-1IP
QUICKPORT STAINLESS-STEEL WALLPHONE PLATE RECESSED FLUSH
[E, F] 1-Port Wallplate 4108W-1SP 4108W-0SP
QUICKPORT SINGLE-GANG STAINLESS-STEEL WALLPLATES
DESCRIPTION 1-PORT 2-PORT 3-PORT 4-PORT 6-PORT
[G] Single-Gang Wallplate 43080-1S1 43080-1S2 43080-1S3 43080-1S4 43080-1S6
QUICKPORT DUAL-GANG STAINLESS-STEEL WALLPLATES
DESCRIPTION 2-PORT 4-PORT 6-PORT 8-PORT 12-PORT
[H] Dual-Gang Wallplate 43080-2S2 43080-2S4 43080-2S6 43080-2S8 43080-S12
QUICKPORT ANGLED STAINLESS-STEEL WALLPLATES WITH ID WINDOWS
DESCRIPTION PART NO.
[I] 4-Port Angled Wallplate, single-gang 43081-1L4
Midsize plates in plastic and high-impact nylon also available. See page A50 or call inside sales at 800-722-2082.
QUICKPORT FLUSH-MOUNT & ANGLED WALLPLATES
• Angled ports relieve stress on equipment cords
• Manufactured from ABS plastic for superior durability
QUICKPORT STAINLESS-STEEL WALLPLATES
•
Manufactured from 304 stainless steel in a brushed finish
to provide corrosion resistance in a non-magnetic material
• Angled wallplate ports facilitate proper front and rear
cable bend radius
CD
I
E, F
G, H
A, B
quickport wallplates
F25 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU
WALLPLATE ACCESSORIES
DESCRIPTION PART NO.
[F] QuickPort Shutter Kit (50 shutters) 51084-ICN
White Label Kit 51084-XLB
[G] Color Label Kit†51084-CLB
[H] Wallplate Mounting Brackets, single-gang, bulk poly-
bag pack, 2 brackets per unit, rack pack carton C0224-000
[I] Wallplate Mounting Bracket, dual-gang, individual
polybag pack, rack pack carton C0225-OCP
† = Color Label Kit includes grey, orange, red, yellow, green, blue, purple, and brown
(2 sheets of each color). Also shown on page A68.
DECORA SINGLE- & DUAL-GANG WALLPLATES
DESCRIPTION SINGLE GANG DUAL GANG
[A, B] Decora, standard size, urea 80401-00* 80409-00*
Decora, standard size, nylon 80401-0N* 80409-0N*
Decora, standard size, stainless 84401-040 84409-040
Decora Plus, standard size, polycarbonate 80301-0S* 80309-0S*
Decora, midway, urea 80601-0S* 80609-0S*
Decora, midway, nylon PJ26-00* PJ262-00*
QUICKPORT® MULTIMEDIA WALLPLATE INSERTS
DESCRIPTION WHITE LT. ALMOND IVORY
6-Port Insert, polybag, standard carton 41646-00W 41646-00T 41646-00I
4-Port Insert, polybag, standard carton 41644-00W 41644-00T 41644-00I
[C] 3-Port Insert, polybag, standard carton 41643-00W 41643-00T 41643-00I
2-Port Insert, polybag, standard carton 41642-00W 41642-00T 41642-00I
[D] 1-Port Insert, polybag, standard carton 41641-00W 41641-00T 41641-00I
[E] HDMI Decora Insert, feedthrough 41647-00W — 41647-00I
DVI Decora Insert, feedthrough 41648-00W — 41648-00I
* = Colors: Choose from any of the colors below.
Ivory (I)Light
Almond (T)
White (W) Grey (G) Black (E) Brown (B)
MDU | Decora® Wallplates & Multimedia Inserts
C, D EA, B
H, I
F, G
Note: 80301 and 80309 are not available in black or brown.
decora wallplates
& inserts
F26
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU
MDU | Cheetah Speed System®
IvoryLight
Almond
White Black
DCAB
CHEETAH SPEED SYSTEM
Install attractive phone, data, and video wallplates quickly and easily with the patented Cheetah Speed
System. Using a revolutionary speed anchor with a snap and lock system, the Cheetah Speed System
reduces installation time by up to 50%, while at the same time oering the elegance and style of screwless
wallplates. Decora® inserts in 1-6 ports and wallplates for phone and coax are available in white, light
almond, ivory, and black.
• Patented speed anchor enables devices and wallplates to be installed without screws
• Self-aligning inserts increase installation speed by up to 50%
CHEETAH SPEED SYSTEM INSERTSU
DESCRIPTION WHITE LT. ALMOND IVORY BLACK
[A] 3-Port Insert, includes blank insert 5020C-00W 5020C-00T 5020C-00I 5020C-00E
Decora Insert Coax CH181-00W CH181-00T CH181-00I CH181-00E
Decora Insert Telephone CH149-00W CH149-00T CH149-00I CH149-00E
[B] Decora Insert Telephone/ Coax Combo CH159-00W CH159-00T CH159-00I CH159-00E
CHEETAH SPEED SYSTEM BOXES & BRACKETS
DESCRIPTION PART NO.
[C] Single-Gang Non-Metallic Datacom Box, multiples of 50 3005C-C00
[D] Single-Gang Low-Voltage Datacom Cut-in Bracket, multiples of 50 4007C-C00
U = Minimum order quantity and lead times may apply.
SPOTLIGHT Cheetah Speed System
Leviton offers a complete line of Cheetah Speed System products including
data and audio inserts, dimmers and fan controls, switches, receptacles, and a
broad selection of screwless wallplates. The entire system uses the innovative,
electrician-developed speed anchor system that enables devices to be installed
without screws in a minimum of time.
To learn more, go to leviton.com/cheetah.
cheetah speed
system
F27 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU
LEVITON ARCHITECTURAL EDITION® POWERED
BY JBL WALL & CEILING SPEAKERS
• JBL titanium-laminate drivers maintain accuracy and clarity even at frequency extremes
• Straight-Line Signal Path™ (SSP) crossover network for minimal signal distortion
• Long-excursion woofers with butyl-rubber half-round surrounds and extended pole-piece magnetic structures
for maximum bass impact and dynamic range
• Low-diraction, swivel-tweeter mounting system for optimum stereo imaging
• Heavy-duty push-type input terminals for long-term connection integrity
• Integrated dog-ear mounting brackets (optional rough-in kits available for installation in new homes)
• Acoustically transparent, paintable grills
LEVITON ARCHITECTURAL EDITION POWERED BY JBL OUTDOOR SPEAKERS (mounting brackets included)
• Elliptical Oblate Spheroidal™ (EOS) Waveguide technology for high-frequency dispersion
• Straight-Line Signal Path (SSP) crossover networks for minimal signal distortion
• 5-way binding post input terminals for long-term connection integrity
PRE-CONSTRUCTION KITS
• Pre-construction kits ensure that speaker locations and wiring are preserved and protected during construction,
allowing for a cleaner, faster, and more precise installation during the trim-out stage
• Fire-Rated Back-Box enclosure meets fire code for MDU and residential installations
LEVITON ARCHITECTURAL EDITION POWERED BY JBL IN-WALL AND IN-CEILING SPEAKERS
DESCRIPTION PART NO.
[A] Pair of 6.5" Two-Way In-Wall Loudspeakers, 80 watts, 8 ohms AEI65-000
[B] Pair of 8" Two-Way In-Wall Loudspeakers, 100 watts, 8 ohms AEI80-000
[C] Pair of 6.5" Two-Way In-Ceiling Loudspeakers, 80 watts, 8 ohms AEC65-000
Pair of 8" Two-Way In-Ceiling Loudspeakers, 100 watts, 8 ohms AEC80-000
[D] 6.5" Two-Channel / Single Location Two-Way In-Ceiling Loudspeakers, two titanium tweeters,
dual voice-coil titanium-laminate woofer 50 watts/channel, 8 ohms AEM65-000
LEVITON ARCHITECTURAL EDITION POWERED BY JBL OUTDOOR SPEAKERS
[E] Pair of Outdoor/All–Weather Two-Way Loudspeakers in Enclosure, 0.75" tweeter, 4" woofer, 150 watts, 8 ohms AEN24-000
PRE-CONSTRUCTION KITS
6.5" Pre-Construction Speaker Kit for in-wall installations AEPI6-KIT
8" Pre-Construction Speaker Kit for in-wall installations AEPI8-KIT
Fire-Rated Back-Box Enclosure (Required for 6.5" in-ceiling speakers AEC65, AEM65), (see page F28 for photo) AEBC6-000
MDU | In-Wall/Ceiling & Outdoor JBL® Speakers
DCAB E
in-wall/ceiling
& outdoor speakers
F28
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU
SPEC-GRADE SOUND SPEAKERS
• AeroNylon tweeter diaphragm provides crystal-clear treble response and exceptionally
accurate tracking of even the most challenging musical transients
• Built-in AutoSurge® circuit protection helps prevent speaker damage
• Advanced phase/time alignment guide properly aligns sound without misaligning the tweeters
• Precision dividing network ensures total audio signal electronic integrity up to the last microsecond
before the signal is converted into sound
• Inert mounting frame with "dogleg" installation points eliminates any transmitted vibrations
that could alter in-wall or in-ceiling sound quality
• Acoustically transparent, paintable grills
LEVITON SPEC-GRADE SOUND OUTDOOR UTILITY TWO-WAY LOUDSPEAKERS
• 5.25" silicate-fiber cone low-frequency transducer with butyl rubber surround
• 5" poly-dome high-frequency transducer
• Element-resistant polypropylene enclosure, gold-plated binding terminals, and aluminum mounting bracket
with stainless-steel hardware
PRE-CONSTRUCTION KITS
• Pre-construction kits ensure that speaker locations and wiring are preserved and protected during construction,
allowing for a cleaner, faster, and more precise installation during the trim-out stage
• Fire-Rated Back-Box enclosure meets fire code for MDU and residential installations
SPEC-GRADE SOUND IN-WALL/IN-CEILING INDOOR SPEAKERS
DESCRIPTION PART NO.
[A] Pair of 6.5" Spec-Grade Two-Way In-Ceiling Loudspeakers, 120 W peak/ 60 W RMS, 8 ohms SGC65-00W
[B] Pair of 6.5" Spec-Grade Two-Way In-Wall Loudspeakers, 120 W peak/ 60 W RMS, 8 ohms SGI65-00W
Replacement Grill for SGC65 SGC65-GRL
Replacement Grill for SGI65 SGI65-GRL
LEVITON SPEC-GRADE SOUND OUTDOOR/UTILITY LOUDSPEAKERS
[C] Pair of Outdoor/Utility Two-Way Loudspeakers in Enclosure, 0.5" tweeter, 5.25" woofer, 120 watts, 8 ohms SGO99-00W
Replacement Grill for SGO99-00W SGO99-GRL
PRE-CONSTRUCTION KITS
Rough-in Bracket for 6.5" In-Wall Loudspeakers PCI65-KIT
[D] Fire-Rated Back-Box Enclosure (Required for 6.5" in-ceiling speakers SGC65) AEBC6-000
MDU | In-Wall/Ceiling & Outdoor Spec-Grade™ Sound Speakers
DCAB
in-wall/ceiling
& outdoor speakers
F29 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU
MDU | Home Theater Speakers
LEVITON ARCHITECTURAL EDITION® POWERED BY JBL HOME THEATER SPEAKERS
DESCRIPTION PART NO.
[A] Dual 5" Two-Way In-Wall Center Channel Home Theater Loudspeakers, 120 watts, 8 ohms AEI55-000
[B] Dual-Channel Two-Way Shelf-Mounted Center Channel Loudspeaker w/ silver grill, 75 watts / 300 watts, 8 ohms AECCS-VCE
[C] Powered 12" Subwoofer w/ amplifier w/ silver grill, 400 watts RMS, 700 watts peak, 8 ohms AESUB-012
[D] Five-Channel Surround-Sound Home Cinema Speaker System w/ 100-watt powered subwoofer
and 5 satellite speakers
AEH50-0**
System-Matched Satellite Speaker for 6.1 and 7.1 surround-sound expansion AESS5-0**
Single-Gang Decorative Satellite Speaker Adapter Wallplate/Bracket AEPHK-0**
Pre-Construction Kit, in-wall center channel shelf for use with AEI55-000 AEPIS-KIT
** = Color: Available in White (WH) or Black (BL).
IN-WALL SPEAKERS
• Straight-Line Signal Path™ (SSP) crossover network
for minimal signal distortion
• JBL® titanium-laminate drivers, pure titanium tweeter,
and polymer-coated aluminum woofers maintain musical
accuracy and clarity, even at frequency extremes
• Low-diraction, swivel-tweeter mounting system
of optimum stereo imaging
SHELF-MOUNT CENTER CHANNEL SPEAKER
• Straight-Line Signal Path (SSP) crossover network
for minimal signal distortion
• Dual 5" JBL PolyPlas cone woofers
• FreeFlow flared port for increased bass response
without added port noise
SUBWOOFER
• JBL PolyPlas™ woofer for low frequencies
• High-efficiency, high-current switching amplifier
• FreeFlow flared port for increased bass response
without added port noise
• Built-in technologies allow simple adjustment for
room acoustics and personal preference
• LFE and line level inputs for maximum
connection flexibility
SURROUND-SOUND HOME CINEMA SYSTEM
• Includes five two-way magnetically shielded satellite
speakers with 2.5" (63.5 mm) woofer and 0.5" (12.7 m)
tweeter; one 8" (200 mm) 100-watt powered subwoofer
with LFE and a built-in crossover network, plus five
adjustable mounting brackets and subwoofer
input RCA cable
• Five-channel system can be expanded to 6.1 or
7.1 surround sound with optional satellite speakers
A
B DC
home
theater speakers
F30
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU
MDU | Volume Controls & Audio Distribution Modules
1X6 AUDIO DISTRIBUTION MODULE
• Combines with impedance-matching Volume Controls to
control up to six speaker pairs from an amplifier or receiver
• Designed to mount in Leviton Structured Media enclosures and connect to six rooms/zones
AUDIO SYSTEM VOLUME CONTROLS
DESCRIPTION PART NO.
[A] Decora Strauss Transformer-Free Slider Volume Control, analog, 200 watts peak, 100 watts RMS,
4-16 ohms, 8 ohm nominal (for use with SGAMP-000) (Decora wallplate sold separately, see page F25) SGVST-00W
[C] Decora Strauss Transformer-Free Impedance-Matching Slider Volume Control, analog, 200 watts peak,
100 watts RMS, 4-16 ohms, 8 ohm nominal (for use with 48211-06A) SGVSM-00W
Decora Strauss Color-Change Kit, converts to light almond SGVCK-0LA
Decora Strauss Color-Change Kit, converts to ivory SGVCK-00I
Decora Strauss Color-Change Kit, converts to black SGVCK-00E
SYSTEM MATCHING MODULE
[B] System Matching Module for impedance-matching passive two-channel multi-room audio systems
(for use with SGVST-00W) SGAMP-000
1X6 AUDIO DISTRIBUTION MODULE
[D] 1x6 Passive Audio Module (for use with SGVSM-00W) 48211-06A
DCAB
White Light
Almond
Ivory Black
DECORA® STRAUSS TRANSFORMER-FREE
VOLUME CONTROLS
• Contemporary slider design brings precision
and elegance to any installed audio system
• Available in standard and impedance-matched versions
• Volume control uses standard Decora wallplate
in a standard J-Box or low-voltage mounting ring
• Color-change kits ensure the right finishing touch
for every application
SYSTEM MATCHING MODULE
• Combine with non-impedance-matching Volume Controls
to control up to six speaker pairs (cannot be used with
impedance-matching volume controls)
• AutoSurge™ circuit technology protects speakers
from potentially damaging transients
• Designed to mount in Leviton
Structured Media® Enclosures
SPOTLIGHT Impedance Matching Difference
When installing an audio system, it is important to
have an impedance-matching component paired with
a standard component. Failure to do so may have a
negative effect on the audio system.
Do NOT use an impedance-matching volume control
with an impedance-matching module, and do NOT use
a standard volume control with a passive audio module.
Doing so, in either instance, could damage the amplifier. SGVSM-00W
48211-06A
SGVST-00W SGAMP-000
volume controls &
audio dist modules
F31 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
MDU
HOME THEATER, MULTI-ROOM & SPEAKER WALLPLATES
• Designed for easy installation of cables using low-voltage
rings and standard low-voltage junction boxes
• Home Theater Interface wallplate (AEHTK)
accommodates 5.1 to 7.1 channel surround-sound
systems, and features RCA connectors for subwoofer
connection and two extra QuickPort® openings
• Multi-room Audio wallplate (AEMRK) accommodates left
and right audio speakers (± connections), and two extra
openings for additional QuickPort connectors (e.g., adding
a subwoofer or 3.5 mm stereo phone jack)
• Speaker wallplate allows for simple, solderless
connections to any home entertainment speaker system
RECESSED ENTERTAINMENT BOX (REB)
• Aordable solution manages home theater electronics
in a single location
• Ideal for new construction (stud-mounted) and retrofit
(wall-mounted) applications
• Low-profile frame provides neat, recessed installation
• Optional high-profile cover includes sliding plastic
front panels, and channels all wires through
the bottom of the unit
RECESSED RECEPTACLES
Recessed Single-Gang Receptacle
• Fits most standard electrical boxes
• Supplies AC power for one or two components
(flat panel TVs and video receiver)
• cULus Approved, code-compliant solution
Recessed Dual-Gang Duplex Receptacle
with Six QuickPort Openings
• Centralizes connection points for AC power,
audio, video, data, and phone
• Includes plastic electrical box for use in new
and retrofit construction
• UL Approved, code-compliant solution
MOBILE DEVICE STATION
• Turns a receptacle outlet into a convenient storage
location for smartphones and MP3 players
• Installs without creating any new holes in the wall
• Available in both Decora® and Renu® styles
• Integrated cable management keeps charging
cables organized and protected
• Requires a Leviton wallplate, sold separately
• Ideal with Leviton USB charger/tamper-resistant receptacle
USB CHARGER/TAMPER-RESISTANT RECEPTACLE
• USB ports with a combined power of 2.1A, ideal for
charging tablets and other high-draw devices
• Compact design fits in a standard wallbox, is compatible
with standard wallplates, and can be multi-ganged with
other standard Leviton devices
• Back and side wired for easy installation
• Smart chip designed for recognizing and optimizing the
charging requirements of your device
• Tamper-Resistant NEC® Compliant shutter mechanism
blocks access to contacts from most foreign objects
MDU | Home Theater & Recessed Devices
DCAB
FEG
IHJ
Mobile Device Station
& USB Charger/Tamper-Resistant Receptacle
home theater
& recessed devices
F32
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
MDU
HOME THEATER AND MULTI-ROOM WALLPLATES
DESCRIPTION PART NO.
[A] Home Theater Interface Wallplate, 14 gold-plated spring clips, two RCA connectors, two QuickPort® openings AEHTK-000
[B] Multi-Room Install Wallplate, two gold-plated spring clips, two QuickPort openings AEMRK-000
[C] Single-Gang Single Spring-Clip Device Audio/Video Wallplate, standard size, polymer break resistant, box mount 40951-1P*
[D] Single-Gang Double Spring-Clip Device Audio/Video Wallplate, standard size, polymer break resistant, box mount 40952-2P*
RECESSED DEVICES & ENTERTAINMENT BOX
Single-Gang Recessed Single Receptacle
15A-125VAC, 2-Pole, 3-Wire — NEMA 5-15R, includes clock hanger hook 00688-00*
Single-Gang Recessed Single Receptacle, Non-Magnetic Stainless Steel
15A-125VAC, 2-Pole, 3-Wire — NEMA 5-15R, includes clock hanger hook 05261-0CH
[E] Single-Gang Recessed Duplex Receptacle 15A-125VAC, 2-Pole, 3-Wire — NEMA 5-15R 00689-00†
Single-Gang Recessed Single Receptacle, Non-Magnetic Stainless Steel
20A-125VAC, 2-Pole, 3-Wire — NEMA 5-20R, includes clock hanger hook 05361-0CH
[F] Dual-Gang Recessed Duplex Receptacle and Openings for six QuickPort Modules
15A-125VAC, 2-Pole, 3-Wire — NEMA 5-15R (four blank inserts included) 00690-00*
[G] Recessed Entertainment Box w/ Low-Profile Frame 47617-REB
Recessed Entertainment Box w/ High-Profile Cover 47617-RBH
High-Profile Cover 47617-HPC
Low-Profile Frame 47617-LPF
Replacement Snap-in Plates, 2 per bag 47617-PLT
MOBILE DEVICE STATION & USB CHARGER / RECEPTACLE
[H] Decora® Mobile Device Station, White 47112-00W
Decora Mobile Device Station, Light Almond 47112-00T
Decora Mobile Device Station, Black 47112-00E
[I] Renu® Mobile Device Station, White on White 47112-RWW
Renu Mobile Device Station, Navajo Sand 47112-RNS
Renu Mobile Device Station, Onyx Black 47112-ROB
[J] USB Charger/Tamper-Resistant Receptacle T5630-00W
* = Color: White (W), Ivory (I)
† = Color: White (W), Lt. Almond (T), Ivory (I), Black (E) Mobile Device Station Colors:
MDU | Home Theater & Recessed Devices
White (W) Light
Almond (T)
Ivory (I) Black (E) Onyx
Black
Navajo
Sand
White On
White
Light
Almond
A Culture of Ingenuity & Innovation
RON SHACKELFORD
Applications Engineer
Ron provides applications engineering support for Leviton’s MDU solutions, PDUs,
and A/V products. He helped develop some of Leviton’s latest products, including
the Mobile Device Station, Enhanced MOS Modules, and e2XHD system. Ron also assists
Leviton’s team of technical service reps with customer support. When he’s not working,
he’s spending time in his vineyard making wine or enjoying a movie on his home cinema,
custom-built with Leviton connectivity.
home theater
& recessed devices
X1A1
TECHNICAL INFORMATION
SECTION
X
X2
SECTION XCONTENTS
GENERAL
INFORMATION
X3 Web-Based Resources
X4 Wiring Standards
X5 Wire Color Codes & Pin Designations
X6 USOC Codes
TERMINATION
INSTRUCTIONS
X7 Copper Connector Termination
X10 Fiber Connector Termination
X12 Fan-Out Kit Assembly
SPLICE TRAYS X13 Dimension & Selection Guide
UPDATE X14 Adapter Plate Discontinuation
STANDARDS X15 NEMA and IEC Classifications
X15 Wallplate Materials
X16 Applications
INDEX X17 Term Index
X23 Part Number Index
TECHNICAL INFORMATION | Web-Based Resources
1. KNOWLEDGEBASE & FORUMS
communities.leviton.com
At Leviton’s Knowledgebase, you can get answers to your
technical questions or post your own inquiries. You’ll find
a unique community hub for Network Solutions as well as
Leviton’s other business units.
2. TRAINING VIDEOS
leviton.com/ns/techlibrary & youtube.com/LevitonMfg
Leviton training videos and animations oer simple
step-by-step instructions for installations and
terminations. Videos include a Secure Keyed LC Fiber
System overview, fiber and copper connecter termination
instructions, and techniques for using fiber optic
fan-out kits.
3. BIM OBJECTS
leviton.com/bim
Building Information Modeling (BIM) is an important
program for design and project coordination in
construction projects. Incorporate Leviton images and
added intelligence into infrastructure design drawings
with our library of free BIM objects.
4. VISIO® STENCILS
leviton.com/visio
Download Microsoft® Visio stencils of Leviton products,
including connectors and wallplates, copper and fiber
components, residential/MDU products, and cable
management solutions.
5. MANUALS & GUIDES
leviton.com/ns/techlibrary
Here you’ll find helpful material, such as the Patch Panel
Selection Guide and popular CAT 6A Reference Guide, as
well as installation manuals for Connected
Home products.
6. NETWORK PLANNING TOOLS
leviton.com/homeconfig & leviton.com/smallbiztool
Fill out a simple online questionnaire and our technical
experts will quickly identify the products that meet
the needs of your home or small business network.
7. MDU INSTALLATION DIAGRAMS
leviton.com/connectedhome
Find helpful wiring diagrams for multi-room audio
and home theater MDU projects.
8. APPLICATION/TECH NOTES
leviton.com/ns/techlibrary
Application notes provide extra instruction for using
and installing products such as copper trunk cables,
Fiber Raceway System, and 66 connecting blocks.
Tech notes oer a deeper look into the unique technology
behind many of our products.
9. INDEPENDENT TESTING INFORMATION
leviton.com/ns/testresults
Find independent test results for Leviton products, including
CAT 6A component performance, pre-terminated OM3 MTP®
System performance, and channel performance of Leviton
connectivity paired with qualified cables.
10. LITERATURE LIBRARY
leviton.com/ns/litlibrary
Refer to our Lit Library for additional systems and product
information, including brochures, case studies, line cards,
spec sheets, and an electronic version of this catalog.
11. SPEC TOOLS
leviton.com/specteam
Download spec tools for use in bids, design plans, and
specification documents at the Spec Team web page,
including sample bid spec forms and RFP documents.
12. CUSTOMIZED PRODUCT SOLUTIONS
leviton.com/configurator
Configure enclosures, MTP cassettes, and fiber and copper
cable assemblies through Leviton’s Make-to-Order program.
13. LIVE CHAT
leviton.com/support
Get fast, easy help when you need it. Connect with Leviton's
technical experts for a quick response and knowledgable
answers to your product and application questions.
14. EZ-LEARNTM
leviton.com/ezlearn
Acquire the skills and abilities you need to compete in
today’s dynamic and ever-evolving electrical industry.
TECHNICAL RESOURCES YOU'LL FIND AT LEVITON.COM
To find product information, simply type the product name or part number into the search
tool at leviton.com. You can also find extra technical assistance using the links below,
including guides, drawings, videos, and more.
0 200
k
s
b
e
l
ow,
0
2
X3 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
technical
information TECH INFO
STANDARD 4-PAIR WIRING
Pair 1 Tip - White/Blue
Ring - Blue
Pair 2 Tip - White/Orange
Ring - Orange
Pair 3 Tip - White/Green
Ring - Green
Pair 4 Tip - White/Brown
Ring - Brown
T568A OR T568B – WHICH ONE SHOULD YOU CHOOSE?
• If the installation is residential, choose T568A unless other conditions apply (see below).
• If there is pre-existing voice/data wiring (remodel, moves, adds, changes), duplicate the existing wiring scheme
on any new connection.
• If project specifications are available, use the specified wiring configuration.
• If components used within the project are internally wired either T568A or T568B, duplicate this wiring scheme.
Leviton residential applications use T568A in all of their circuit boards.
STANDARDS
• TIA-568-C “Commercial Building Telecommunications Cabling Standard” lists both wiring configurations.
T568B is the most prevalent for commercial installations.
• TIA-570-B “Residential Telecommunications Cabling Standards” recommends T568A.
T568A & T568B WIRING STANDARDS IDC COLOR ASSIGNMENTS
TECHNICAL INFORMATION | Wiring Standards
Band-Striped Twisted-Pair Wire Solid-Color Twisted-Pair Wire Quad Wire* (Solid-Color,
Non-Twisted Wire)
For 6-wire jacks use pair 1, 2, & 3 color codes. For 4-wire jacks use pair 1 & 2 color codes.
For some cables, wire for even jack pin numbers may have a white stripe. This is equivalent to cables with solid wires for the same pin numbers.
*Caution: Quad wire is no longer acceptable for installation in multi-line environments. If encountered during a retrofit, quad wire should be replaced with 100 ohm UTP. Connecting
new quad to installed quad will only amplify existing problems and limitations associated with quad wire; leaving existing quad in place and connecting 100 ohm UTP to it may also
be ineective, as the quad wire may negate the desired eect of the UTP.
WIRING POTS (PLAIN OLD TELEPHONE SERVICE) WIRE TO CATEGORY-RATED WIRE
For some cables, wires for jack pin numbers 2, 4, 6, and 8 may have a white stripe. This is equivalent to cables with solid wires for the same pin numbers.
JACK PIN # T568A WIRE COLORS
1 White/Green
2 Green
3 White/Orange
4 Blue
5 White/Blue
6 Orange
7 White/Brown
8Brown
JACK PIN # T568B WIRE COLORS
1 White/Orange
2 Orange
3 White/Green
4 Blue
5 White/Blue
6 Green
7 White/Brown
8Brown
Visit leviton.com/ns/support
for more wiring diagrams and
technical information.
ACCESSORY
GREEN
BLACK
YELLOW
TIP
RING
GROUND
RED
PAIR 2
PAIR 1
TIP
RING
TIP
RING
TIP
RING
TIP
RING
PAIR 1
PAIR 2
PAIR 3
PAIR 4
GREEN
RED
BLACK
YELLOW
WHITE
BLUE
X4
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
technical
information TECH INFO
WIRE COLOR CODES & PIN DESIGNATIONS
Electrical Network Connection
From 1 to 25 single or multiple-pair circuits bridged to the network or other
connected equipment.
Mechanical Arrangement
Circuits are provided on numbered tip and ring positions on a miniature 50-pin ribbon
telco connector (Amphenol™-type). Pins 1 (ring) and 26 (tip) are considered position
1. Pins 2 (ring) and 27 (tip) of the ribbon connector are position 2. This pairing continues
through 25 pairs.
Typical Usage
Many key and PBX systems specify the RJ-21X, or "Amphenol-type" as the network
interface device. Many of these systems also use the RJ-21X as a connector for stations
or telephone sets, wired from the KSU or PBX main distribution frame.
Many Leviton connectors can be used for the RJ-21X configuration where "intermixing"
is permitted. Substitution of these special connectors is often both economical and
practical. Contact Network Solutions tech support for information about versions to
meet your requirements.
Sometimes an RJ-11 or RJ-14C can be installed in place of an RJ-21X. While many
smaller systems that require only a few lines may show the RJ-21X as the "official"
connector required under registration, less complex connectors such as the RJ-11 or
RJ-14C can often be specified (perhaps in multiples). If the system requires only a few
lines but the RJ-21X is specified on the registration label, under FCC Part 68 you may
specify the RJ-11C, RJ-14C, RJ-25C, or RJ-61X instead.
CONTACT ASSIGNMENTS FOR PLUGS AND JACKS
(ISDN Assignment of Contact Numbers as Specified by ISO Document 8877: 1987 (E)
CONTACT NUMBER TE NT POLARITY
1 Power source 3 Power sink 3 +
2 Power source 3 Power sink 3 –
3 Transmit Receive +
4 Receive Transmit –
5 Receive Transmit +
6 Transmit Receive –
7 Power sink 2 Power source 2 +
8 Power sink 2 Power source 2 –
For use in TE to TE interconnections, power source/sink 3 shall conform to the requirements
specified in CCITT recommendation 1.430, section 9.2 for power source/sink 2.
25-Pair Color Coding/ISDN
Contact Assignment RJ-21X
TECHNICAL INFORMATION |
Wire Color Codes & Connector Pin Designations
Visit leviton.com/ns/support
for a detailed port-pin
configuration chart.
X5 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
technical
information TECH INFO
RJ-11C/RJ-11W - 6P2C RJ-14C/RJ-14W - 6P4C RJ-25C - 6P6C
RJ-48C RJ-48S
RJ-38XRJ-31X RJ-45S
NOTE: Short removed on insertion of plug
RJ-48X
RJ-61X
TECHNICAL INFORMATION | USOC Codes
USOC CODES
These Universal Service Order Codes (USOC) for connecting telephone
instruments and related equipment to telephone lines are based on Part 68,
Subpart F, Section 68.502 of FCC regulations, and as described by the T1E1.3
Working Group on Connectors and Wiring Arrangements.
USOC codes were developed years ago by the Bell operating companies to
identify service or equipment under tariff. Information on USOC codes is
provided here should you run across these in your work.
Registered RJ Jack numbers end with a letter that indicates the wiring or
mounting method. "C" identifies a surface or flush-mounted jack, "W" identifies
a wall-mounted jack, "X" identifies a complex multi-line or series-type jack,
and "S" identifies a single-line jack.
X6
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
technical
information TECH INFO
EXTREME 6+ (CAT 6) & GIGAMAX® 5E+ (CAT 5E) CONNECTOR TERMINATION INSTRUCTIONS
1. Remove about 3" of cable jacket and center spline (stiff "t" shaped plastic separator inside cable).
2. Determine which wiring scheme to use, T568A or T568B. (See chart on page X4.) Note the associated color codes
and connector pin numbers on the label located between the IDC connector slots (Figure A). Peel back label for T568A wiring.
3. Leave the cable jacket within 1
/
8" of the connector side, then route the wires for termination using the selected wiring scheme
(Figure B). Route cable perpendicular to the IDC field. Ensure there is enough slack in the twisted pairs, and do not place
the cable jacket into the termination field.
4. Use your fingers to carefully seat the wires into the IDC slots. Set a 110-style impact tool to low impact and position it
perpendicular to the connector. Maintain wire-pair twisting to within less than 1
/
2" of the IDC contact; then, seat and trim
the cable one pair at a time to prevent crushing the inside pairs (Figure C).
5. Place the dust cap over the terminated wires for secure connection (Figure D).
T568A & T568B WIRING STANDARDS
IDC COLOR ASSIGNMENTS
JACK
PIN #
T568A
WIRE COLORS
T568B
WIRE COLORS
1 White/Green White/Orange
2 Green Orange
3 White/Orange White/Green
4 Blue Blue
5 White/Blue White/Blue
6 Orange Green
7 White/Brown White/Brown
8 Brown Brown
To help determine whether to use T568A or T568B, see page X4.
TERMINATION INSTRUCTIONS | CAT 6A/6 UTP Connectors
eXtreme
®
CAT 6A
eXtreme
®
6+
eXtreme
®
CAT 6A
eXtreme
®
6+
eXtreme
®
CAT 6A
eXtreme
®
6+
EXTREME® CAT 6A CONNECTOR TERMINATION INSTRUCTIONS
1. Remove about 3" of cable jacket and center spline (stiff plastic separator
inside CAT 6A cable).
2. Determine whether to use wiring scheme T568A or T568B. Note the
associated color codes and connector pin number on the label located
between the IDC connector slots (Figure A). Peel back label for T568A wiring.
3. Leave the cable jacket within 1
/
8" of the connector side, then route the
wires for termination using the selected wiring scheme (Figure B). Route
cable perpendicular to the IDC field. Ensure there is enough slack in the
twisted pairs, and do not place the cable jacket into the termination field.
Use your fingers to carefully seat wires into the IDC slots. Maintain wire-
pair twisting to within ½" of the IDC. Set a 110-style impact tool to low
and position it perpendicular to the connector. Seat and trim the cable
one pair at a time to prevent crushing the inside pairs (Figure C).
4. Place the Cone of Silence® over the terminated wires for secure
connection and guaranteed CAT 6A performance (Figure D).
Figure A Figure B Figure C Figure D
Figure A Figure B Figure C Figure D
X7 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
termination
instructions TECH INFO
A
B
A
B
TERMINATION INSTRUCTIONS |
CAT 5e UTP & CAT 6A/6/5e Shielded Connectors
GIGAMAX® 5E (CAT 5E) & CATEGORY 5 CONNECTOR
TERMINATION INSTRUCTIONS
1. Remove about 3" of jacket from the cable to expose the wires.
2. Determine which wiring scheme to use, T568A or T568B (see chart on
page X4). Note the associated color codes and connector pin numbers as
labeled on the sides of the connector (Figure A).
3.
Route the wires for termination according to the chosen color code. Place the
cutting side of the tool on the outside to trim the excess wire flush with the
connector body as you punch the wires down (Figure B). Terminate and trim one
pair at a time, starting from the rear of the connector (Figure C). Terminating
each pair after placement will prevent crushing the inside pairs with the
punchdown tool. Maintain cable jacket as close to termination as possible.
4. Place the dust cap over the terminated wires to ensure a secure
connection and added strain relief (Figure D).
5. Noting the “UP” orientation of the connector, insert the terminated
connector into the desired QuickPort® housing.
T568A & T568B WIRING STANDARDS
IDC COLOR ASSIGNMENTS
JACK
PIN #
T568A
WIRE COLORS
T568B
WIRE COLORS
1 White/Green White/Orange
2 Green Orange
3 White/Orange White/Green
4 Blue Blue
5 White/Blue White/Blue
6 Orange Green
7 White/Brown White/Brown
8 Brown Brown
To help determine whether to use T568A or T568B, see page X4.
Figure A Figure B Figure C Figure D
Figure A Figure B Figure C Figure D Figure E
CAT 6A, 6 & 5E SHIELDED CONNECTOR TERMINATION INSTRUCTIONS
1. Strip a minimum of 1 inch of jacket from the end of the F/UTP cable. Pull the foil or braided shield back over the jacket as shown
and wrap the drain wire around the shield. For U/FTP cable, fold the foil from each twisted pair over the jacket and wrap the drain
wire around the shield.
2. Insert the wires from the stripped cable into the stuffer cap through the holes as shown (Figure A).
3. Insert the wires into their correct positions per the desired wiring scheme (Figure B).
4. Cut the excess wire off as close to the edge of the cap as possible using a flush cut tool (Figure C); tips of the wires should not
protrude more than 1
/
32 of an inch.
5. Make sure the arrows on both connector and cap point in the same direction (Figure D).
6. Align the cap with the IDC towers and press into position (Figure D).
7. Rotate the wings toward each other until they snap closed (Figure D).
8.
Ensure that the drain wire is wrapped around the connector strain relief. Cut off excess foil as close to the connector as possible (Figure E).
9. Tie-wrap the drain wire to the connector. Make the tie-wrap tight to ensure the drain wire does not come loose.
Note: This shielded connector is also compatible with other shielded cable constructions. (U/FTP, F/FTP, etc.)
B
X8
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
termination
instructions TECH INFO
75 foot
Maximum
Length
VGA Monitor
Level (1)
Level (1)
Level (2)
Level (2)
VGA PC
41295-VMx
41295-VPx
TERMINATION INSTRUCTIONS | Multimedia Outlet System VGA Modules
X9 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
termination
instructions TECH INFO
TERMINATION INSTRUCTIONS | FastCAM® Fiber Connector Termination
These instructions should not be used with previous versions of the FastCAM
SC, ST, and LC connectors, which are only used to terminate 250 μm and 900
μm fiber. (The SAN number on packaging will start with "OXX.")
Before beginning termination, identify the components of your connector
tool kit. (See page B69 and B70 for options.) To ensure the FastCAM connector
is prepared for termination, remove and reinstall the wedge clip and then press
down on the clip at the ferrule side (first click) and then press down on the fiber
insertion side (second click). See our install video at leviton.com/videos.
FIBER TERMINATION – 250 μm
Tools required: LYNX or CT30A Cleaver* and a fiber stripper. (See pg. B71)
1. Slide the protective tubing, 900 μm boot, and 250 μm protective tube
(in order) onto the fiber.
2. Strip the fiber to a length of 40 mm by removing 10 mm at a time.
3. Clean the stripped fiber with an alcohol wipe to remove any debris.
Check the fiber integrity by bending the stripped end slightly to 60˚.
4. Set fiber onto cleaver such that 250 μm coating edge is at 10.5 mm
position and cleave.
5. Wedge clips are engaged at shipment. If they have become dislodged,
squeeze the top and bottom of the wedge clip, ensuring it is inserted in
the connector body. A click will be heard for each wedge.
6. Slide the 250 μm protective tubing towards the end 250 μm coating.
7.
Insert the cleaved fiber into the rear of the connector until the connection
is made. Make a slight bend in the fiber to maintain connection.
8. OPTIONAL: Use the Visual Fault Locator (VFL) as an aid to determine
that the cleaved fiber and stubbed fiber are connected properly.
8A. Remove the FastCAM connector dust cap and insert the connector into
the VFL. Turn the VFL power on and there will be a red glow in Position 1
of the wedge clip.
8B. Insert the cleaved fiber into the rear of the connector until the red
glow dims in Position 1 of the wedge clip. Make a bend in the fiber to
maintain connection.
9. Maintaining a slight force on the fiber, release the wedge clip by
squeezing both sides until the wedge clip dislocates itself from the
connector body. Remove the wedge clip. If using a VFL, remove it from
the connector and place the dust cap back onto the connector’s ferrule.
10. Slide the boot up and over the rear of the connector body. Slide the clear
900 μm protective tubing - over the black 250 μm protective tubing –
to the back of the connector’s boot.
11. For ST connectors, push ST housing over body of connector to
complete assembly.
FIBER TERMINATION – 900 μm
When using a 900 μm Fan-out/Break-out kit to unjacketed 250 μm fiber,
follow the manufacturer’s instructions. After the kit is installed, use the
following procedures for FastCAM termination.
Tools required: LYNX or CT30A Cleaver* and a fiber stripper. (See pg. B71.)
1. Slide the 900 μm boot onto the fiber.
2. Strip the fiber to a length of 40 mm by removing 10 mm at a time.
3. From the end of the 900 μm buffered fiber, place a mark at 15.5 mm
for SC/ST or at 11.5 mm for LC.
4. Clean the stripped fiber with an alcohol wipe to remove any debris.
Check the fiber integrity by bending the stripped end slightly to 60˚.
5. Set the stripped fiber onto the cleaver such that the 900 μm buffered
fiber’s edge is at the 10.5 mm position and cleave.
6. Wedge clips are engaged at shipment. If they have become dislodged,
squeeze the top and bottom of the wedge clip, ensuring it is inserted
in the connector body. A click will be heard for each wedge.
7. Insert the cleaved fiber into the rear of the connector until the
connection is made and the mark is inside the connector. Make a
slight bend in the fiber to maintain connection.
8. OPTIONAL: Use the Visual Fault Locator (VFL) as an aid to determine
that the cleaved fiber and stubbed fiber are connected properly.
8A. Remove the FastCAM connector dust cap and insert the connector
into the VFL. Turn the VFL power on and there will be a red glow in
Position 1 of the wedge clip.
8B. Insert the cleaved fiber into the rear of the connector until the red glow
dims in Position 1 of the wedge clip. Make a slight bend in the fiber to
maintain connection.
9. Maintaining a slight force on the fiber, release the wedge clip by
squeezing both sides until the wedge clip dislocates itself from the
connector body. Remove the wedge clip. If using a VFL, remove it from
the connector and place the dust cap back onto the connector’s ferrule.
NOTE: The ferrule’s dust cap should remain in place until you are ready to insert the connector.
10. Slide the boot up and over the rear of the connector body.
11. For ST connectors, push ST housing over body of connector to
complete assembly.
FIBER TERMINATION – 2 mm and 3 mm
Tools required: LYNX or CT30A Cleaver* and a fiber stripper. (See pg. B71.)
1. Slide 2 mm or 3 mm boot onto cable.
2. Remove 70 mm of cable jacket.
3. Strip the fiber to a length of 40 mm by removing 10 mm at a time.
4. From the end of the 900 μm buffered fiber, place a mark at 15.5 mm
for SC/ST or a mark at 11.5 mm for LC.
5. Clean the stripped fiber with an alcohol wipe to remove any debris.
Check the fiber integrity by bending the stripped end slightly at 60˚.
Set the stripped fiber onto the cleaver such that the 900 μm buffered
fiber’s edge is at the 10.5 mm position and cleave.
7. Wedge clips are engaged at shipment. If they have become dislodged,
squeeze the top and bottom, ensuring the wedge clip is inserted into
the connector body. A click will be heard for each wedge.
8. Insert fiber slowly into the connector until connection is made
and marking is hidden. Form a slight bend in the fiber to maintain
connection.
9. OPTIONAL: Use the Visual Fault Locator (VFL) as an aid to determine
that the cleaved fiber and stubbed fiber are connected properly.
9A. Remove the FastCAM connector dust cap and insert the connector
into the VFL. Turn the VFL power on and there will be a red glow in
Position 1 of the wedge clip.
9B. Insert the cleaved fiber into the rear of the connector until the red
glow dims in Position 1 of the wedge clip. Make a bend in the fiber to
maintain connection.
10. Maintaining a slight force on the fiber, release the wedge clip by
squeezing both sides until the wedge clip dislocates itself from the
connector body. Remove wedge clip unit from connector. If using a
VFL, remove it from the connector and place the dust cap back
onto the connector’s ferrule.
11. Fan Kevlar® around connector.
12. Grip Kevlar on both sides of the connector to maintain tension.
Screw boot onto back of connector to fix Kevlar firmly.
13. Cut Kevlar from around the connector.
14. For ST connectors, push ST housing over body of connector to
complete assembly.
*Other cleavers with a guaranteed maximum 1º cleave angle for single-mode fibers
and a maximum 2º cleave angle for multimode fibers provide acceptable results.
FASTCAM SC, ST, & LC TERMINATION INSTRUCTIONS
For additional tech tips on this product,
visit communities.leviton.com.
X10
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
termination
instructions TECH INFO
TERMINATION INSTRUCTIONS | Fast-Cure® Fiber Connector Termination
1 1/2”
1/2”
1/4”
1 3/4”
3/4”
1/4”
PREPARE – All Connector Types:
If using 900 μm buffered fiber, do not use crimp tube in step 1.
1. Slide boot and crimp tube onto fiber, small end inserted first. (Fig. A)
For 3 mm Jacketed Fiber: Use ribbed boot, provided.
For 900 μm Buffered Fiber: Use smooth boot, provided. If using an
SC connector on 900 μm buffered fiber, you must install SC body into
housing before continuing to step 2. Align body with connector housing,
then insert body into housing until it snaps into place. Use dust cap to
push body into housing.
2. Strip jacket and/or buffer using the measurements provided in the
figure above, stripping in increments of ¼". If using jacketed cable, trim
aramid strands as indicated above. (Fig. B1-3)
3. Clean exposed fiber with a 99% isopropyl alcohol wipe, followed by a
lint-free wipe, both before and after stripping.
4. SC & FC Connector on 3 mm Jacketed Fiber ONLY: Insert spacer
over buffer and push until it contacts jacket. (Fig. C)
ASSEMBLE – All Connector and Fiber Types:
1. Remove the dust cap from the connector.
2. Dry fit the fiber by inserting it into the connector. This will ensure that
all coating has been removed and the fiber can be inserted into the
connector ferrule.
3. Shake the adhesive bottle before using. Remove the cap from the
adhesive bottle, and attach the needle by pressing it gently onto the
top of the bottle until you feel it set into place.
NOTE: Syringes are also available for inserting adhesive.
4. Insert the needle and firmly hold it against the back of the connector
while filling it. Being careful not to overfill the connector, squeeze the
bottle gently, injecting the adhesive into the connector. Continue until a
dot of adhesive is visible at the other end, then remove the needle. Wipe
away excess adhesive from the end of the ferrule.
5. Using the brush attached to the lid on the bottle of primer, apply the
primer to the first 10 mm of the exposed fiber. (Fig. B1)
6. Insert the fiber into the back of the connector. To prevent
premature bonding, use continuous motion until the fiber is fully
seated in the connector. The primer will activate adhesive and
begin the bonding process.
NOTE: The fiber should be inserted within 45 seconds of priming.
7. Hold the fiber in place for 10-20 seconds, and allow up to 3 minutes
for the adhesive to bond.
8. If using any cable type but jacketed fiber, slide the boot back
up over the back of the connector now. If using jacketed fiber,
follow the steps below.
Additional Steps For 3 mm Jacketed Cable ONLY:
9. Arrange the aramid strands evenly around the end of the connector,
then slide the crimp tube over the aramid strands and connector.
Using a crimp tool, crimp the tube at both the large end (step 1) and
the small end (step 2). (Fig. D)
ST/SC - large end: Use the .178" hex die.
ST/SC - small end: Use the .151" hex die.
LC: Use the .128" hex die.
CLEAVE AND POLISH – All Connector and Fiber Types:
1. When adhesive is cured (no longer wet), scribe fiber where it meets
bead of adhesive at end of ferrule. (Fig. E)
2. Pull fiber away from connector, then properly dispose of fiber debris.
3. 12 μm "AIR POLISH" FOR SM AND MM FIBER – Begin by "Air Polishing"
connector with 12 μm polishing film. Hold edge of film with thumb
and forefinger. Gently touch connector to film and rotate using
approximately 18-20 one-inch circles to remove fiber stub. Scraping
sound of fiber on film will cease when polishing process is complete.
12 μm film is dark pink in color.
4. Holding a lint-free wipe across fingertips, gently press connector's
endface against wipe. Twist connector in place to remove any debris.
Do not drag connector across the lint-free wipe.
5. 3 μm POLISH FOR SM AND MM FIBER – Wipe the bottom surface of
polishing puck and surface of polishing pad with a 99% isopropyl
alcohol wipe.
6. Place 3 μm film on polishing pad, dull side up, then carefully set
polishing puck on film. Gently insert connector into puck, and using
light pressure, trace 15-20 "figure 8s" on film. Test to ensure fiber is
completely polished.
7. Also check to ensure that fiber is polished flush by dragging gently
across lint-free wipe. Fiber should not snag. If fiber snags, continue
polishing. Remove any debris using a lint-free wipe.
8. Repeat steps 5 and 6 with the .3 μm film. Leviton’s 3 μm film is yellow
and .3 μm film is light blue in color.
B1
(not to scale)
B2
Scribe and pull fiber away
FAST-CURE ASSEMBLY INSTRUCTIONS
LC with Jacketed CableST/SC with Jacketed CableAll Buffered Cable
apply primer
10 mm
strip length
20 mm
For additional tech tips on this product, visit communities.leviton.com.
Figure C Figure D Figure E
Figure A Figure B
B3
X11 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
termination
instructions TECH INFO
TERMINATION INSTRUCTIONS | Fiber Optic Fan-Out Kit
Each kit breaks out 6 or 12 individual 250 μm fibers from a loose buffered
multifiber tube into individual 900 μm buffer tubes. The fibers can then be
terminated using the Thread-Lock® or Fast-Cure® Connector termination
procedure for 250 μm fiber.
One fan-out kit is required for each loose buffered multi-fiber tube being
terminated. Leviton recommends you read these instructions thoroughly
prior to installation of the fan-out kit.
Contents (Figure 1):
A. Top Cover
B. 6- or 12-Fiber Terminal Assembly Unit (24" or 36")
C. Base
Recommended Tools
(not included with Fan-Out Kit)
Also Recommended Consumables
(available in Leviton’s Consumables
Kit PN# 49800-FAN)
Determining Strip Length
Locate your work surface as close to the enclosure location as possible,
to minimize strip length. Route the cable sheathe through the enclosure
to the work surface.
On the cable sheathe (D), measure the length of the fan-out tube (B) plus
6-12". Mark this length with a piece of tape – this is the strip point for the
fiber cable sheathe. (Figure 2)
Cable End Preparation
Following your cable manufacturer’s recommended stripping procedures,
strip the cable sheathe back to the tape mark. Secure the cable to the
enclosure, then, using lint-free wipes or a gel cleaner, clean any dirt or gel
surrounding the loose buffered multifiber tubes (E). (Figure 2)
NOTE: Quantities of loose buffered multifiber tubes may vary among cable
manufacturers.
Loose Buffered Fiber Tube Preparation
Measure the tube back 3" longer than your fan-out tube (B). Mark with an
indelible marker, score, and strip, exposing the 250 μm fibers (F) inside
the buffer tube. Tape the buffered fiber tube to the work surface roughly
2" from the stripped end. (Figure 2) Wipe all gel from the exposed 250 μm
fibers using a gel cleaner.
Place buffered fiber in the base of the fan-out kit. Using needle nose pliers,
press both pairs of the crimping fixture to hold the tube. Crimp only enough
to start to deform the tube. Twist and pull the fan-out body to check if
the crimp is secure. The tube should not slip or move in the crimp fixture.
(Figure 3)
FIBER OPTIC FAN-OUT KIT ASSEMBLY INSTRUCTIONS
AB
C
DE
F
E
B
F
Electrical or Masking Tape
Needle Nose Pliers
Indelible Marker
Buffer Tube
Stripper
Silicone RTV Sealant
Gel Cleaner
Alcohol Pad
Lint-Free Wipes
Talc Powder
NOTE: For added retention, secure with a few drops of silicone RTV sealant
on the crimp points of the fixture.
Fiber Threading Procedure
Tape the terminal assembly unit (B) in the vertical position, 75 mm (3")
to the side of the loose buffered fiber tube. (Figure 4)
Untangle the fibers and make sure they are completely free of gel filling
compound. Leviton recommends using alcohol pads or gel cleaner to
remove the gel.
NOTE: To more easily thread the fiber, cup talc powder in your hand and
apply to the length of the fibers.
Starting with the blue fiber, thread 150 mm (6") of the fiber into the
corresponding color tube of the terminal assembly unit (Figure 4).
Repeat this procedure for the remaining fibers, making sure the color-coded
fibers match the color-coded 900 μm tubing.
When all the fibers have been threaded, push the fibers as a group until
they start to protrude from the end of the 900 μm fan-out tubes. Gently pull
the fibers through the tubing, leaving sufficient slack so the fibers are not
stressed. DO NOT PULL TAUT.
NOTE: While threading fibers through the 900 μm tubing, gently pull the
tubing straight with one hand to remove any coil.
Untape the terminal assembly unit and slide the assembly toward the
loose buffered fiber tube while pulling the fibers from the end of the
900 μm tubing. If the fibers twist, rotate the terminal assembly in the
opposite direction of the twist. (Figure 5)
Place the terminal assembly unit into the mating feature in the base.
For added protection, add a small bead of silicone RTV where the 250 μm
fibers enter the terminal assembly, securing the assembly and sealing the
water-resistant gel (icky-pick) inside the fiber cable.
Align the top cover and snap into place (Figure 6). Remove the tape from
the loose buffered fiber tube and repeat this procedure for any remaining
loose buffered multifiber tubes. Once complete, snap the cover in place.
Fiber Enclosure Installation
Hold the fan-out kit and buffered fiber together at the point where the tube
enters the fan-out kit. Install terminated connector into respective adapter
port. Route 900 μm buffered fiber around cable managers (for slack and
storage). Peel tape off adhesive (on bottom of base) and place between
the cable managers (or where appropriate). Route loose tube subunit
around cable managers (for slack and storage), and secure loose tube
cable as required.
For additional tech tips on this product, visit
communities.leviton.com.
Figure 1 Figure 2 Figure 3
Figure 4 Figure 5 Figure 6
X12
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
termination
instructions TECH INFO
SPLICE TRAYS | Dimension & Selection Guide
CHOOSING YOUR SPLICE TRAYS
Leviton offers several styles of metal and injection-molded splice trays. Use this chart to help determine which
style will fit your specific needs. See pages B25, B37, and B38 for complete descriptions of splice trays, splice
holders, and sleeves.
Heat Shrink (Plastic Holders)
Heat Shrink (Foam Holders)
Bare Fusion
Opt-X® Ultra/1000i/500i (Rack Mount)
LightSpace® DPC/DPS (Rack Mount)
Opt-X® 1000 (Wall Mount)
LightSpace CPC/CPS (Wall Mount)
NIDS (Wall Mount)
METAL SPLICE TRAY (0.35" HEIGHT)
12-fiber Mini, 4" W x 7" L T47HS-P06 T47BF-P06 ••••
12-fiber Mini, w/ standoff,
4" W x 7" L (0.57" Height) 5T000-00T ••••
12-fiber Standard, 4" W x 11.75" L T4LHS-P06 T4LHS-F06 T4LBF-P06 •••
24-fiber High Density, 4" W x 11.75" L T4LHS-P12 T4LHS-F12 T4LBF-P12 •••
12-fiber Standard, 5" W x 11.75" L T5LHS-P06 T5LHS-F06 T5LBF-P06 •••
24-fiber High Density, 5" W x 11.75" L T5LHS-B12 T5LHS-F12 T5LBF-P12 •••
INJECTION-MOLDED SPLICE TRAY (MINI – 0.39" HEIGHT, HIGH DENSITY - 0.56" HEIGHT)
12-fiber Mini, 3.74" W x 5.59" L T5PLS-12F ••••
24-fiber High Density, 4.5" W x 7.63" L T5PLS-24F •••
See fiber enclosure section for splice tray capacity information.
X13 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
splice trays TECH INFO
UPDATE | Precision-Molded Opt-X® Adapter Plates Replace Opt-X Metal Plates
Opt-X Metal Plate
Description (Discontinued)
Discontinued
Part Number
Opt-X Precision-Molded Plate
Description (Replacement)
Replacement
Part Number
3-pack Duplex SC MM (12-fiber), BEIGE,
phos. bronze sleeve 5F100-3BC Plate (beige), 62.5 μm MM (OM1), Duplex SC,
6-fiber, zirconia ceramic sleeve 5F100-6IC
NEW -Plate (black), 50 μm MM (OM2), Duplex SC,
6-fiber, zirconia ceramic sleeve 5F100-6EC
3-pack Duplex SC LOMM (12-fiber), AQUA,
zirc. ceramic sleeve 5F100-3AC Plate (aqua), 50 μm LOMM (OM3 & 4), Duplex SC,
6-fiber, zirconia ceramic sleeve 5F100-6QC
3-pack Duplex SC SM (12-fiber), BLUE, zirc. ceramic sleeve 5F100-3ZC Plate (blue), SM (OS1 & 2), Duplex SC,
6-fiber, zirconia ceramic sleeve 5F100-6LC
3-pack Duplex SC SM (12-fiber), GREEN,
zirc. ceramic sleeve 5F100-3CA Plate (green), SM/APC (OS1 & OS2), Duplex SC,
6-fiber, zirconia ceramic sleeve 5F100-6VC
6-pack Duplex SC MM (12-fiber), BEIGE,
phos. bronze sleeve 5F100-6BC Plate (beige), 62.5 μm MM (OM1), Duplex SC,
12-fiber, zirconia ceramic sleeve 5F100-2IC
NEW -Plate (black), 50 μm MM (OM2), Duplex SC,
12-fiber, zirconia ceramic sleeve 5F100-2EC
6-pack Duplex SC LOMM (12-fiber), AQUA,
zirc. ceramic sleeve 5F100-6AC Plate (aqua), 50 μm LOMM (OM3 & 4), Duplex SC,
12-fiber, zirconia ceramic sleeve 5F100-2QC
6-pack Duplex SC SM (12-fiber), BLUE,
zirc. ceramic sleeve 5F100-6ZC Plate (blue), SM (OS1 & 2), Duplex SC,
12-fiber, zirconia ceramic sleeve 5F100-2LC
6-pack Duplex SC SM (12-fiber), GREEN,
zirc. ceramic sleeve 5F100-6CA Plate (green), SM/APC (OS1 & OS2), Duplex SC,
12-fiber, zirconia ceramic sleeve 5F100-2VC
6-pack Duplex LC MM (12-fiber), BEIGE,
phos. bronze sleeve 5F100-12P Plate (beige), 62.5 μm MM (OM1), Duplex LC,
12-fiber, zirconia ceramic sleeve 5F100-2IL
NEW -Plate (black), 50 μm MM (OM2), Duplex LC,
12-fiber, zirconia ceramic sleeve 5F100-2EL
6-pack Duplex LC LOMM (12-fiber), AQUA,
zirc. ceramic sleeve 5F100-12A Plate (aqua), 50 μm LOMM (OM 3 & 4) Duplex LC,
12-fiber, zirconia ceramic sleeve 5F100-2QL
6-pack Duplex LC SM (12-fiber), BLUE,
zirc. ceramic sleeve 5F100-12Z Plate (blue), SM (OS1 & 2), Duplex LC,
12-fiber, zirconia ceramic sleeve 5F100-2LL
6-pack Duplex LC SM (12-fiber), GREEN,
zirc. ceramic sleeve 5F100-12V Plate (green), SM/APC (OS1 & OS2), Duplex LC,
12-fiber, zirconia ceramic sleeve 5F100-2VL
6-pack QUAD LC MM (24-fiber), BEIGE,
phos. bronze sleeve 5F100-24P Plate (beige), 62.5 μm MM (OM1), Quad LC,
24-fiber, zirconia ceramic sleeve 5F100-4IL
NEW -Plate (black), 50 μm MM (OM2), Quad LC,
24-fiber, zirconia ceramic sleeve 5F100-4EL
6-pack QUAD LC LOMM (24-fiber), AQUA,
zirc. ceramic sleeve 5F100-24A Plate (aqua), 50 μm LOMM (OM3 & 4) Quad LC,
24-fiber, zirconia ceramic sleeve 5F100-4QL
6-pack QUAD LC SM (24-fiber), BLUE,
zirc. ceramic sleeve 5F100-24Z Plate (blue), SM (OS1 & OS2), Quad LC,
24-fiber, zirconia ceramic sleeve 5F100-4LL
6-pack ST MM (6-fiber), phos. bronze sleeve 5F100-1ST Plate (black), ST MM/SM, 6-fiber, zirconia ceramic sleeve 5F100-6MT
6-pack ST SM (6-fiber), zirc. ceramic sleeve 5F100-6ZT Plate (black), ST MM/SM, 6-fiber, zirconia ceramic sleeve 5F100-6MT
8-pack ST MM (8-fiber), phos. bronze sleeve 5F100-8ST Plate (black), ST MM/SM, 8-fiber, zirconia ceramic sleeve 5F100-8MT
8-pack ST SM (8-fiber), zirc. ceramic sleeve 5F100-8ZT Plate (black), ST MM/SM, 8-fiber, zirconia ceramic sleeve 5F100-8MT
Blank Plate, plastic 5F100-BPP Plate (BLACK), Blank 5F100-PLT
Blank Plate, metal 5F100-BLK Plate (BLACK), Blank 5F100-PLT
Leviton has phased out many metal
Opt-X Fiber Adapter Plates and replaced
them with new polycarbonate Precision-
Molded Opt-X Fiber Adapter Plates. The
precision-molded design is eight times
stronger than metal and provides a tight
fit with integrated couplers. Precision-
molded adapter plates are available as
stand-alone units. Pre-loaded make-
to-order enclosures are loaded with
precision molded adapter plates.
X14
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
update TECH INFO
NEMA
NEMA Standards Publication 250 defines the NEMA
Enclosure Type Numbers. Unlike the IEC Enclosure
Classification Designations, NEMA Standards Publication 250
tests for environmental conditions such as corrosion, rust,
icing, oil, and coolants. For this reason, and because the tests
and evaluations for other characteristics are not identical, the
IEC Enclosure Classification Designations cannot be exactly
equated with NEMA Enclosure Type Numbers. The table below
provides an equivalent conversion from NEMA Enclosure Type
Numbers to IEC Enclosure Classification Designations. Note
that the NEMA Types meet or exceed the test requirements for
the associated IEC Classifications. Therefore, this table cannot
be used to convert from IEC Classifications to NEMA Types.
IEC
IEC Publication 529, "Classification of Degrees of Protection
Provided by Enclosures," defines the IP (Ingress Protection)
Suitability Rating. The IP Suitability Rating is a system for
classifying the degree of protection provided by enclosures
of electrical equipment. The higher the number in the rating,
the greater the degree of protection provided by the enclosure.
The first numeral of the code indicates the degree of protection
for persons against access to hazardous parts inside the
enclosure and/or against the ingress of solid foreign objects.
The second numeral indicates the degree of protection of
equipment inside enclosures against damage from the ingress
of water. The IP Suitability Rating defined by IEC 529 does not
specify any degree of protection against mechanical damage
of equipment, risk of explosions, or conditions such as moisture
(i.e., condensation), corrosive vapors, fungus, or vermin.
THERMOSET
Thermoset products are manufactured by applying pressure
to powdered material. These types of products do not
provide a high degree of resistance to impacts, chemicals,
and solvents; therefore they are not suitable for heavy-duty
applications. Urea is a thermoset material, and is commonly
used to manufacture wallplates for use in residential or
light-duty commercial applications.
THERMOPLASTIC
Thermoplastic products are manufactured by heating pellets of
material into a liquid for injection into a mold. These materials
are the preferred choice for heavy-duty applications because
they provide superior resistance to impact, chemicals, and
solvents. ABS, nylon, and polycarbonate are thermoplastic
materials, which are used to manufacture wallplates for use in
commercial applications.
STAINLESS STEEL
Leviton manufactures wallplates from type 304 and type
430 stainless-steel materials. Type 430 stainless steel
is resistant to the corrosion effects of moisture, and as
such is suitable for exterior or wet applications. Type 430
stainless steel has magnetic properties that may interfere
with certain equipment, such as hospital MRI and marine
navigation equipment. Type 304 stainless steel is non-
magnetic and is also more corrosion resistant than type
430 stainless steel, and as such is the preferred choice
for commercial applications. All QuickPort® and telephone
wallplate products are manufactured from type 304
stainless-steel material. Standard wallplates are also
available in type 304 stainless-steel material by using the
suffix "040" in the part number.
WALLPLATE MATERIALS
The material used to manufacture a wallplate will have a significant impact on the product’s durability
and suitability for certain applications.
NEMA AND IEC ENCLOSURE CLASSIFICATIONS
NEMA and IEC Enclosure Classifications Comparing NEMA Enclosure Type Numbers and IEC Enclosure
Classification Designations (IP Suitability Rating)
STANDARDS | Products
CONVERTING NEMA TO IEC
NEMA
Enclosure Type
Number
Equivalent IEC
Enclosure Classification
Designation
1 IP10
2 IP11
3 IP54
3R IP14
3S IP54
4 and 4X IP56
5 IP52
6 and 6P IP67
12 and 12K IP52
13 IP54
IEC INGRESS PROTECTION RATING
Protection against solid objects
0 None
1 Solid objects larger than 50 mm
2 Solid objects larger than
12.5 mm
3 Solid objects larger than 2.5 mm
4 Solid objects larger than 1.0 mm
5 Dust
6 Dust tight
Protection against water
0 None
1 Vertically falling water drops
2 Vertically falling water drops
(up to 15° angle)
3 Spraying water
4 Splashing water
5 Water jets
6 Powerful water jets
7 Temporary immersion in water
8 Continuous immersion in
water
X15 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
standards TECH INFO
STANDARDS | Applications
Leviton products and guidelines are developed consistent with all known applicable practices
as defined by the following:
• TIA-568-C.0: Generic Telecommunications Cabling for Customer Premises
• TIA-568-C.1: Commercial Building Telecommunications Cabling Standard
• TIA-568-C.2: Telecommunications Cabling, Copper Component, and Cabling Specifications
• TIA-568-C.3: Telecommunications Cabling, Fiber Component, and Cabling Specifications
• TIA-569-B: Commercial Building Standard for Telecommunications Pathways and Spaces
• TIA-606-B: Administration Standard for Telecommunications Infrastructure of Commercial Buildings, published June 2012
• TIA-942-2: Telecommunications Infrastructure Standard for Data Centers
• ANSI-J-STD-607-A: Commercial Building Grounding and Bonding Requirements for Telecommunications
• IEEE 802.3: Ethernet-based LANs (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet)
• IEEE 1100: Recommended Practice for Powering and Grounding Electronic Equipment
• ISO 11801: Generic Cabling for Customer Premises (multiple standards)
• ISO/IEC 15018 Edition 1.0: Generic Cabling for Homes
• ISO/IEC 24764 Edition 1.0: Generic Cabling Systems For Data Centres
• ISO/IEC 14763-2 Edition 1.0: Implementation and Operation of Cust. Premises Cabling - Planning and Installation
• ISO/IEC 14763-3 Edition 1.1: Implementation and Operation of Cust. Premises Cabling - Testing of Optical Fibre Cabling
• National Electrical Safety Code (NESC): Published by IEEE
• National Electric Code (NEC, NFPA 70): Published by NFPA
• BS EN 50173: Information Technology, Generic Cabling Systems, General Requirements (British Adopted European Standard)
• Telecommunications Distribution Methods Manual (TDMM): Published by BICSI
• Underwriters Laboratories (UL): Applicable listings and ratings
• NECA/BICSI 607-2011, Standard for Telecommunications Bonding and Grounding Planning and Installation Methods
for Commercial Buildings
• ANSI/BICSI 002-2011, Data Center Design and Implementation Best Practices
• ANSI/BICSI 001-2009, Information Transport Systems Design Standard for K-12 Educational Institutions
• ANSI/BICSI 004-2012, Information Technology Systems Design and Implementation Best Practices
for Healthcare Institutions and Facilities - Printed
• ANSI/NECA/BICSI 568-2006, Standard for Installing Commercial Building Telecommunications Cabling
• ANSI/BICSI 005-2013, Electronic Safety and Security (ESS) System Design and Implementation Best Practices
• Building Automation Systems cabling standard, ANSI/TIA-862-A-2011
• Residential Cabling standard, ANSI/TIA-570-C-2012
• A/V Design Reference Manual (AVDRM)
• BICSI ITS Dictionary
• Electronic Safety and Security Design Reference Manual (ESSDRM)
• Information Transport Systems Installation Methods Manual (ITSIMM)
• Outside Plant Design Reference Manual (OSPDRM)
• Telecommunications Distribution Methods Manual (TDMM)
X16
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
standards TECH INFO
TERM PAGE TERM PAGE
INDEX | Term Index
110-Style Wiring Products A20-A24
110-Style/Universal Patch Panels A13-14, A16-167, A20
3.5 mm QuickPort® Stereo Adapter A42
4500 Series PDUs D14
5500, 5505 Series PDUs D13
66 Blocks & Accessories A26
Adapter Plates, Fiber
LightSpace®B35-B36
Opt-X®B21-B22
HDX B9-B10, B14
Adapters
A/V A42, A46
Fiber B64, B66
Array Cords B54
Audio, Home
Home Theater Wallplates F31-F32
JBL® F27, F29
Leviton Architectural Edition® F27, F29
Speakers F27-F29
Volume Controls F30
A/V (Audio/Video)
Adapters A42, A46
Connectors See Connectors, A/V
Mounting Plates,
Structured Media®
F15-F16
Multimedia MDU Wallplates F23-F25
Back Boxes A53-A54, F27-F28
Banana Jack Connectors A42, F22
Bezels A39
Binding Post Connectors A42, F22
Blank Adapter Plates B14, B22, B36
Blank Inserts, QuickPort A42
Blank Panels, Rack-Mount A14, C15, C17
BNC Connector A42, F22
Brackets
Fiber (MTP®) B44
Furniture A53-A54
Hinged (cable management) C18
Structured Media Enclosure F5-F12
Wallplate Mounting F25
C1 Ultra Composite Patch Panels A14
Cable Assemblies, Copper
Copper Trunk Terminated to
e2XHD Cassette
A18, A32
Low Smoke Zero Halogen A28-A29, A31-A32
Patch Cords A28-A29
Patch Cords, IntactTM Intelligent E6
Patch Cords, MDU F15
Secure RJ A33-A34, E5
Shielded A28-A29, A31
Trunks A31-A32
Cable Assemblies, Fiber
Array Cords
(Opt-X® Unity 40/100G)
B54
Harnesses B44, B51-B53
Patch Cords B54-B58
Pigtails B55, B57-B58
Secure Keyed LC B50, B53, B58, E6
Trunks B5-B6, B46-B50
Cable Management
110-Style (Cross Connect) A25
Brackets C18
Fiber Raceway System (duct) C5-C12
Horizontal 19" Rack-Mount C15
Overhead Infrastructure Platform C3-C4
Rear Managers C16
Rings C18
VELCRO® Brand Fasteners C19-C20
Vertical (Versi-Duct®) Rack-Mount C13-C14
Cassettes, MTP (Modules) B9-B10, B13-B14,
B15-B20, B23-B24,
B27-B30, B44
Category 5e See GigaMax® CAT 5e
Category 6 See eXtreme® CAT 6
Category 6A See eXtreme CAT 6A
CATV Splitters F6, F21
Cheetah Speed System®F26
Cleavers, Fiber B69-B71
X17 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
index TECH INFO
TERM PAGE TERM PAGE
INDEX | Term Index
Compression Connectors A44, F22
Connector Adapter Bezels A39
Connectors, A/V A41-A46, F22
Connectors, A/V - MOS
(Multimedia Outlet System)
A10, A45-A46, F22
Connectors, Copper (jacks)
CAT 3 A39, F22
CAT 5 A39, F22
CAT 5e A6, A38, A40,
CAT 6 A5, A38, A40
CAT 6A A3-4, A37, A40
Floor A51
Multimedia Outlet System (MOS) A10, A45-A46,
B65-B66
QuickPack® A38
Shielded A7, A40
Termination Instructions X7-X12
Voice-Grade/USOC F22
Connectors, Fiber
FastCAM®B60
Fast-Cure®B61
Multimedia Outlet System (MOS) B65-B66
Secure Keyed LC B62
Consumables, Fiber B72
Cross-Connect Products
110-Style Wiring Products A22-A25
66 Blocks & Accessories A26
Custom-Configured Products See Make-to-Order
Decora®
A/V Inserts A42, A46
QuickPort® Inserts & Floor
Box Assemblies
A44, A42, A51
Telephone & Video Jacks/Inserts A60
Volume Controls (MDU) F30
Wallplates A63
Duct, Fiber (Fiber Raceway System) C5-C12
Duplex Devices
Outlet-style Inserts (QuickPort) A51
Wallplates A64
DuraPort® Industrial Connectivity A55-A56
DVI Decora Insert, feedthrough A42
e2XHD Patching System A8, A18, B27-B30
Enclosures, Rack-Mount - Fiber
High-Density Flush-Mount B18, B39-B40
LightSpace® DP/DPS/DPC B32
Opt-X® 1000i/500i B17-B18
Opt-X HD B12-B14
Opt-X Ultra®B16
Replicator®B43
VertiGO®B20
Enclosures, Structured Media®F5-F12
Enclosures, Wall-Mount - Fiber
LightSpace CPC B33
LightSpace CPS B33
LightSpace NIDS B34
Opt-X 1000 B19
Enclosures, Zero-U - Fiber
VertiGO B20
Enclosures, Wireless C22
Enclosures, Zone C21
Excella® Wallplates & Inserts A57
Expansion Boards,
Structured Media
F19-F20
eXtreme® CAT 6
Cable Assemblies See Cable
Assemblies,
Copper
Connectors A5, A38, A40
Cross Connect A22
Patch Panels See Patch Panels,
Copper
System Overview A5
eXtreme CAT 6A
Cable Assemblies See Cable
Assemblies,
Copper
Connectors A3-A4, A37, A40
Cross Connect A22
Patch Panels See Patch Panels,
Copper
System Overview A3-A4
F-Connectors A43-A44, A51,
A59-A60
FTTH B19, F12
Faceplates See Wallplates
X18
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
index TECH INFO
TERM PAGE TERM PAGE
INDEX | Term Index
Faceplates, Modular Furniture A53-A54
Fan-Out Kits B63, B72, X12
Termination Instructions X12
FastCAM®
Connectors B60
Termination Instructions X10
Fast-Cure®
Connectors B61
Termination Instructions X11
Fiber
50/125μm LOMM (OM3/OM4) See LOMM
50/ & 62.5/125μm MM
(OM1/OM2)
See MM
SM (OS1/OS2) See SM
Adapter Plates B9-B10, B14, B21-B22,
B35-B36
Adapters B64, B66
Blade Replicators B42
Brackets B44
Cable Assemblies See Cable Assemblies,
Fiber
Cleavers B69-B71
Connectors See Connectors, Fiber
Consumables B72
Duct (Fiber Raceway System) C5-C12
Enclosures See Enclosures
Fan-Out Kits B63, B72, X12
Harnesses B51-53
LightSpace®See LightSpace
MTP® Brackets B44
MTP Cassettes B23-24
Opt-X®See Opt-X
Opt-X Ultra®See Opt-X Ultra
Panels B20, B29, B40, E5
Patch Cords B54-B58, E6
Pigtails B55, B57-B58
Secure Keyed LC B50, B53, B58, B62, E6
Splice Modules B25
Splice Trays, Sleeves & Holders B25, B37-B38
Tools B62-B72
Trunk Cables B5, B46-B50
Fiber Raceway System (FRS) C5-C12
Fire-Rated Back Box F27-F28
Floor Box Assemblies A51
Floor Connectors A51
Flush-Mount Enclosures B18, B39-B40
FLX Series PDUs D3-D8
Furniture Brackets & Faceplates A53-A54
GigaMax® CAT 5e
Cable Assemblies See Cable Assemblies,
Copper
Connectors A6, A38, A40
Cross Connect A24
Patch Panels See Patch Panels,
Copper
System Overview A6
Harnesses B44, B51-B53
HDF3168 Distribution System B7-10
HDMI® Connectors & Inserts A42
High-Density Cassette System
(e2XHD)
A8, A18, B30
Home Audio See Audio, Home
Industrial Connectivity (DuraPort®)A55-A56
Inserts, Wallplate
A/V A42, A46
Decora®A42, A44, A46, A51
Duplex Outlet-Style A51
Excella® 86 mm x 86 mm A57
Other 86 mm x 86 mm A58
IntactTM Intelligent Port
Management System E2-E6
J-Box Kit F14
Jacks (Connectors)
A/V See Connectors, A/V
Copper See Connectors,
Copper
Floor A51
JBL® Home Audio F27, F29
Labeling Solutions
e2XHD A18, B29
Patch Panels A20, A68
X19 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
index TECH INFO
TERM PAGE TERM PAGE
INDEX | Term Index
Work Area A68
Leviton Architectural Edition®F27, F29
LightSpace®
Accessories B38
Adapter Plates B35-B36
Rack-Mount Enclosures B32
Wall-Mount Enclosures B33-B34
LOMM Fiber (Laser-Optimized
Multimode), 10G
Adapter Plates B9-10, B14, B21-B22
Cable Assemblies See Cable Assemblies,
Fiber
Connectors B60-B62
MTP® Cassettes B9-B10, B14, B23, B30
Splice Modules B25
LOMM Fiber (Laser-Optimized
Multimode), 40/100G
Cable Assemblies See Cable Assemblies,
Fiber
MTP Cassettes B9-B10, B14, B24, B30
Opt-X® Unity B6, B47-B48
Low Smoke Zero Halogen A28-A29, A31-A32
Make-to-Order
Brackets, Fiber B44
Cable Assemblies, Copper A28-A32, A34
Cable Assemblies, Fiber See Cable Assemblies,
Fiber
Enclosures, Fiber See Enclosures
Modules, MTP (Cassettes) B23-B24
Panels, Fiber B40
PDUs, FLX Series D3-D8
Secure Keyed LC System B46, B50, B53, B58,
B62
Secure RJ System A33-A34, E5-E6
Metered Series PDUs D9-D10
MM Fiber (Multimode),
Laser-Optimized
See LOMM
MM Fiber (Multimode), Standard
Adapter Plates B9-B10, B14, B21-B22,
B35
Cable Assemblies See Cable Assemblies,
Fiber
Connectors B60-B62
MTP Cassettes B9-B14
System Overview B3-B4
Mobile Device Station F31-F32
Modules, Voice, & Data F19
Mounting Plates, Structured Media F15-F16
MTO See Make-to-Order
MTP Brackets B44
MTP Modules (Cassettes) See Cassettes, MTP
(Modules)
Multimedia Outlet System (MOS)
Copper & A/V A10, A45-A46
Fiber B65-B66
NIDS (Network Interface Devices) B34
Opt-X
Accessories B26
Adapter Plates B21-B22
Enclosures, Rack-Mount B17-B18
Enclosures, Wall-Mount B19
Opt-X HD
Accessories B13
Adapter Plates B14
Cassettes B14
Enclosures B12-B13
Opt-X Ultra®
Accessories B26
Enclosures, Rack Mount B16
Opt-X Unity B6, B24, B47-B48, B51,
B54
Overhead Infrastructure Platform C3-C4
P1000 Series PDUs D11-D12
Palm Tool A66
Patch Blocks A15
Patch Cords See Cable
Assemblies
Patch Panel Labeling Solutions A20, A68
Patch Panels, Copper
110-Style/Universal A13-A14, A16-A17,
A20
Angled A16
Blank A14, C15, C17
C1 Ultra Composite A14
X20
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
index TECH INFO
TERM PAGE TERM PAGE
INDEX | Term Index
Category 5e A13-A17
Category 6 A13-A17
Category 6A A13-A17
e2XHD Patching System A8, A18
Flat A13-A15
High-Density A18
IntactTM Intelligent E5
Patch Block A13, A15
QuickPort®A14-A17
Recessed Angled A17
Recessed Flat A17
Selection Guide A12
Shielded A15-A16
Transitional Covers C17
Twist & Mount (MDU) F17
VertiGO®A19
Voice Grade A20
Patch Panels, Fiber
e2XHD Patching System B27-B30
High-Density Flush-Mount B39-B40
Intact Intelligent E5
Opt-X 500i B18
VertiGO B20
Pigtails B55, B57-B58
Power Distribution Units (PDUs)
4500 Series D14
5500-5505 Series D13
FLX Series D3-D8
Metered Series D9-D10
P1000 Series D11-D12
Switched Series D9-D10
Power Supplies, Structured Media®F6, F14
Pre-terminated Solutions
Cable Assemblies, Copper A27, A30-A32
Cable Assemblies, Fiber B45-B58
Fiber Overview B5-B6
MTP® Cassettes B9-B10, B13-B14,
B23-B24, B27-B30
QuickPack®A38
QuickPort
A/V Connectors & Adapters See Connectors, A/V
Blank Inserts A42
Copper Connectors (Jacks) See Connectors,
Copper
Decora® Wallplates & Inserts A42, A44, A51
Excella® Wallplates & Inserts A57
Fiber Adapters B64, B66
Furniture Faceplates A53, A54
Patch Panels A14-A17
Surface-Mount Boxes A54
Wallplates, Plastic A48, A50, F24
Wallplates, Stainless Steel A49, F24
Raceway (Fiber Raceway System) C5-C12
Rack-Mount Enclosures See Enclosures, Rack-
Mount
RCA Connectors A43-A44
Receptacles, Recessed (MDU) F31-F32
Recessed Entertainment Box (MDU) F31-F32
Replicator® Enclosures B43
Routers & Switches (MDU) F13
S-Video Connectors & Adapters A42, F22
Secure Keyed LC System B50, B53, B58, B62, E6
Secure RJ System A33-A34, E5-E6
Shielded Connectivity
Cable Assemblies A28-A29
Connectors A7, A40
Patch Panels A15-16
System Overview A7
Termination Instructions X8
SlimLine Patch Cords A28-A29
SM Fiber (Single-Mode)
Adapter Plates B9, B14, B21-B22,
B35-B36
Cable Assemblies See Cable Assemblies,
Fiber
Connectors B60-B62
MTP Cassettes B9-B10, B14, B23, B30
Splice Modules B25
System Overview B3-B4
X21 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
index TECH INFO
TERM PAGE TERM PAGE
INDEX | Term Index
Speakers (MDU) F27-F29
Splice Trays, Holders, & Sleeves B25, B37-B38
Splitters F6, F21
Stainless-Steel Wallplates See Wallplates,
Stainless Steel
Standards X15-16
Structured Media®
Brackets F10, F15-F16
Cabling Panels F17-F18
Enclosures F5-F12
Expansion Boards F19-F20
Modules F19
Mounting Plates F15-F16
Patch Panels F17-F18
Power Supplies F6, F14
Video Modules F21
Surface-Mount Boxes
Back Boxes A53-54
QuickPort® A53-54
Telephone A61
Switched Series PDUs D9-D10
Switches & Routers (MDU) F13
Telephone Input Distribution Panel
(TIDP)
F17
Telephone Jacks, Inserts
& Wallplates
A59-A62
Termination Instructions
Copper X7-X9
Fiber X10-X12
Tools
Copper A65-A68
Fiber B67-B72
Fiber Raceway System C12
MDU F16
Transitional Covers, Rack-Mount C17
Trunk Cables See Cable Assemblies
Twist & Mount Patch Panels F17
Ultra High-Flex Patch Cords F15
USB Connector A42
USB Receptacle F31-F32
VELCRO® Brand Fasteners C19-C20
Versi-Duct® Cable Management C13-C14
VertiGO® Patch Panels
Copper A19
Fiber B20
VGA Connectors A46
Video Connectors See Connectors, A/V
Video Modules, Structured Media F21
Video Splitters F6, F21
Video Wallplates A59-A60
Visual Fault Locator B60, B68, B71
Voice-Grade Connectivity A20, A59-A62,
F17-F19, F22
Wall-Mount Enclosures See Enclosures,
Wall-Mount
Wall-Phone Jacks, Inserts,
& Wallplates
A49, A59-A62
Wallplate Inserts See Inserts, Wallplate
Wallplates (Faceplates)
Angled A49-A50, A57
A/V (MDU) E23-E25, F23-F25
Decora®A63
Duplex A64
Excella®A57
Midway A50, A59, A63-A64
Renu®A52
Round Opening A64
Shielded Connectors A49-A50
Standard A48-A49, A59
Stainless Steel A49, A55-A56,
A62-A64, F24
Telephone A49, A59-A60, A62
Video A59-A60
Wireless
Access Points C22
Enclosures C22
Wiring Standards X4
Zero-U Patch Panels
Copper A19
Fiber B20
Zone Enclosures C21
X22
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
index TECH INFO
PART NO. PAGE PART NO. PAGE PART NO. PAGE
INDEX | Part Number Index
index
00688-*** F32
00689-*** F32
00690-*** F32
00PJ7-*** A64
00PJ8-*** A64
05261-0CH F32
05361-0CH F32
0PJ82-*** A64
3005C-C00 F26
40050-*** A26
40054-*** A26
40066-*** A26
40067-0BC A26
40070-MDP A67
40072-*** A26
4007C-C00 F26
40089-00D A15, A26
40144-*** A60
40149-*** A60
40159-*** A60
40201-00I A61
40214-*** A62
40223-00S A62
40226-00S A62
40238-*** A59
40244-*** A59
40249-*** A59
40253-*** A62
40257-*** A62
40258-*** A59
40259-*** A59
40278-*** A61
40539-*** A59
40644-*** A60
40649-*** A60
40659-*** A60
40681-*** A60
40682-*** A60
40734-*** A42, F22
40735-*** A43, F22
40782-*** F22
40812-RTK F16
40830-*** A43, F22
40831-*** A43, F22
40832-*** A42, F22
40833-*** A42, F22
40834-*** A42, F22
40835-*** A42, F22
40837-*** A42, F22
40839-*** A42, F22
40951-*** F32
40952-*** F32
40981-*** A60
40982-*** A60
40985-*** A44, F22
40988-000 A67
40989-ACT F16
40989-CPT A67, F16
41010-SPW C20
41020-SPR C20
41030-SMJ A54
41054-IDD A61
41080-*** A48, A50, A68, F24
41081-*** A50, F24
41084-*** A42-43, B64, F22
41085-*** B64
41087-*** A51
41089-*** A54
4108W-*** A49, F24
41091-*** A50
410L2-*** A24
41100-HLD A22, A24, A68
41106-*** A39, F22
41108-*** A39, F22
41150-*** C15
41188-SM2 C16
41225-SAP C20
41290-*** A46, B65
41291-*** A46, B66
41292-*** A46, B66
41293-*** A46, B66
41294-*** A46, B66
41295-*** A46, B66
41296-*** A46, B65
41600-00I A26
41620-00I A26
41638-*** A60
41641-*** A51, F25
41642-*** A51, F25
41643-*** A51, F25
41644-*** A51, F25
41646-*** A51, F25
41647-*** A42, F25
41648-*** A42, F25
41649-*** A46, B65
41650-*** A51
41652-*** A51
41658-*** A60
41880-*** A25
41A10-HCM A24
41AB2-*** A24
41AB6-*** A22
41AW1-*** A24
41AW2-*** A24
41D10-HCM A24
41D1R-HCM A24
41D6A-1F4 A22
41DBR-*** A24
41DR2-*** A24
41DR6-*** A22
41DW1-*** A24
41DW2-100 A24
41LBL-*** A22, A24, A68
41MB2-*** A25
41NB2-*** A24
41NB6-1F4 A22
42080-*** A48, A50
42081-*** A50, F24
42400-8FG F15
42777-*** A54
43080-*** A49, A68, F24
43081-*** A49, F24
43105-*** C19, F16
43108-*** C19
43112-*** C19
43115-*** C19
44115-*** C19
4515-*** D14
4520-*** D14
45224-RCS C20
4625A-*** A61
46700-SLG C20
47112-*** F32
47600-QPB F15
47603-*** F17-F20
47604-*** F8
47605-*** F8, F10, F14, F19
47606-*** F18
47609-*** F19, F20
47611-*** F13, F19
47612-*** F10, F15, F16
47612-28B F10
47612-42B F10
47613-*** F16
47615-NYL F16
47615-PTT A66
47616-DSF F19, F20
47617-*** F32
47689-00B F19
47689-0QP A15
47690-*** F21
47693-*** F21
476TL-T12 F17
476TM-*** F17
47FTH-*** F12
48211-*** F30
48212-*** F14
48605-*** F11
48900-*** C20
X23 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
index TECH INFO
PART NO. PAGE PART NO. PAGE PART NO. PAGE
INDEX | Part Number Index
49005-*** C16
49006-AMB C16
49012-*** A20
49013-*** A20
49014-*** A20
49018-*** A20
49103-IDC A24
49104-*** A24
49105-IDC A24
491RU-*** C14
49200-00M A26
49222-*** A54
49251-*** C18
49252-*** C15
49253-*** C15
49254-*** C15, C17
49255-*** A15, A17, E5
49256-*** A16
49257-*** A20, A68
49258-*** C15
4925C-*** C15
49260-*** C18
49261-BKT C18
49262-HR1 C18
49265-*** C14
49280-*** A19, B20
492RU-*** C14
49300-SM* C15
49400-FHB C18
4940L-*** C14
49553-*** A66, F16
49560-TTS A67
49561-SSP A67
49562-TSK A67
49605-30W F11
49660-00P F16
49800-*** B63, B70, B72
4980L-*** C14
49886-*** A66, B61, B71-B72
49886-VFL B71
49887-*** B63
49910-*** A54
49990-*** B61
49991-*** B60
4999K-*** B62
4MKIT-F24 E5
4MSYS-BKT E5
4MSYS-IDH E5
4MSYS-IDM E5
4S089-*** A54
4S115-75E C19
4S255-*** A15
4S256-*** A16
4W006-AMB C16
4W254-*** C15, C17
4W256-*** A17
5020C-*** F26
50DCL-*** B56
50DLC-*** B56
50DSC-*** B56
50DST-*** B56
50PLC-KIT B57
50PLC-M03 B57
50PSC-KIT B57
50PSC-M03 B57
50PST-KIT B57
50PST-M03 B57
51084-*** A68, F25
542LL-A03M B54
542LL-B03M B54
548MM-A03M B54
548MM-B03M B54
54DLC-M** B56
54DCL-M** B56
54PLC-KIT B57
54PLC-M03 B57
5500-*** D13
5505-190 D13
59265-5DC C14
5C000-RPL B26
5CMTL-RPL B26
5D000-*** B26
5D460-*** A29
5F100-*** B22, F15
5FUHD-*** B10, B14
5G108-*** A38, A66, F22
5G110-*** A38, A66
5G240-*** A24
5G270-*** A15
5G34A-*** A24
5G34B-*** A24
5G460-*** A29
5G596-*** A13, A17
5G597-*** A16
5HHOM-*** F15
5L000-KAL B26
5L000-L0K B19, F8, F10
5L2LL-A03M B54
5L2LL-B03M B54
5L4JJ-B03M B54
5L8MM-A03M B54
5L8MM-B03M B54
5LDLC-*** B56
5LDCL-*** B56
5LDSC-*** B56
5LPLC-KIT B57
5LPLC-M03 B57
5LPSC-KIT B57
5LPSC-M03 B57
5LPST-M03 B57
5PCBR-*BT B26
5R100-14R B26
5R1RU-023 B26
5R1UE-OPX B18
5R1UH-S03 B16, E5
5R1UH-S08 B13
5R1UL-CMT B26, B40
5R1UL-F03 B18
5R1UM-S08 B13
5R1UM-*03 B17
5R1UR-TRY B13
5R2UH-S06 B16, E5
5R2UH-S16 B13
5R2UL-CMT B26
5R2UL-F06 B18
5R2UM-S16 B13
5R2UM-*06 B17
5R2UR-TRY B13
5R3UE-OPX B18
5R3UL-F12 B18
5R3UM-*** B17
5R4UH-S12 B16
5R4UM-*** B17
5RCMP-KIT B13, B26, B29
5RCMP-KT2 B13, B26, B29
5RCMR-KIT B13, B26, B29
5RKIT-OM3 E5
5RKIT-OS2 E5
5S180-SH5 A40
5S460-**S A29
5T000-00T B25, B37, B38
5W110-00N B19
5W120-00N B19
5W170-00N B19
5W310-00N B19
5W320-00N B19
5W370-00N B19
5W597-U48 A17
5W710-00N B19
5W720-00N B19
5W770-00N B19
5Z460-*** A29
6110G-R*6 A37
61110-*** A38, A66
6210G-*** A28
62240-*** A22
6234B-*** A22
62460-*** A29
62DCL-*** B56
X24
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
index TECH INFO
PART NO. PAGE PART NO. PAGE PART NO. PAGE
INDEX | Part Number Index
62DCT-*** B56
62DLC-*** B56
62DSC-*** B56
62DST-*** B56
62PLC-KIT B57
62PLC-M03 B57
62PSC-KIT B57
62PSC-M03 B57
62PST-KIT B57
62PST-M03 B57
69104-IDC A22
6910G-*** A15
69270-*** A15
69585-IDL A20, A68
69586-*** A13, A17
69587-*** A16
6A10G-R*6 A37
6A586-U** A13
6A587-*** A16
6AS10-*** A28
6ASHD-S6A A40
6AZ10-*** A28
6D460-*** A29
6H460-*** A29
6S180-SH6 A40
6S460-**S A29
6W587-U48 A17
6Z460-*** A29
78003-000 A64
78014-000 A64
78016-000 A64
78025-000 A64
78804-000 A64
80301-*** A63, F25
80309-*** A63, F25
80401-*** A63, F25
80409-*** A63, F25
80414-*** A51
80503-*** A64
80504-*** A64
80516-*** A64
80601-*** A63, F25
80609-*** A63, F25
80703-*** A64
80704-*** A64
80716-*** A64
80781-*** A59
80782-*** A59
84003-040 A64
84004-040 A64
84014-040 A64
84016-040 A64
84025-040 A64
84401-040 A63, F25
84409-040 A63, F25
85003-000 A64
85004-000 A64
85014-000 A64
85016-000 A64
85025-000 A64
86003-000 A64
86004-000 A64
86014-000 A64
86016-000 A64
86025-000 A64
87003-000 A64
87014-000 A64
87016-000 A64
87025-000 A64
88003-000 A64
88004-000 A64
88014-000 A64
88016-000 A64
88025-000 A64
89265-*** C13
8980L-*** C13
8C80L-*** C13
AB100-00* A39
AB200-00* A39
AB300-00* A39
AEBC6-000 F27, F28
AEC65-000 F27
AEC80-000 F27
AECCS-VCE F29
AEH50-*** F29
AEHTK-000 F32
AEI55-000 F29
AEI65-000 F27
AEI80-000 F27
AEM65-000 F27
AEMRK-000 F32
AEN24-000 F27
AEPHK-*** F29
AEPI6-KIT F27
AEPI8-KIT F27
AEPIS-KIT F29
AESS5-*** F29
AESUB-012 F29
APL12-*** B36
APLW6-*** B36
APLW8-*** B36
APPLC-S03 B57
APPSC-S03 B57
APSSC-*** B57
BL000-00W A57
BL186-*** A57
BLWP1-*** A57
C022*-*** F25
C1253-2CM A14, C15, C17
C1255-H48 A14
C1586-U48 A14
C1686-U48 A14
C5914-000 F16
CH149-*** F26
CH159-*** F26
CH181-*** F26
CPC12-STD B33
CPC24-STD B33
CPC48-STD B33
CPCSR-*** B38
CPGRD-KIT B38
CPLOK-KIT B38
CPS12-STD B33
CPS24-STD B33
CPS48-STD B33
D6700-00E A56
D6701-00E A56
D6706-00E A56
D670K-*** A56
D6710-*** A56
D6720-*** A56
D6721-*** A56
D675E-00E A56
DP03U-STD B32
DP04U-STD B32
DP06U-STD B32
DPC6U-033 B32
DPC8U-STD B32
DPC12-066 B32
DPCMP-UNV B38
DPGRD-KIT B26, B38
DPLOK-KIT B38
DPS3U-STD B32
DPS4U-STD B32
DPS6U-STD B32
DUSTK-CAP B62
E2X**-*** A18, B29-B30, C16
ETRTN-*TL B62, E6
F3168-*** B10
FB106-*** B44
FB109-*** B44
FB110-VST B44
FB112-*** B44
FB204-10L D7
FB206-10L D7
FB207-10L D7
FB210-10L D7
FB310-10L D7
FB311-10L D8
X25 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
index TECH INFO
PART NO. PAGE PART NO. PAGE PART NO. PAGE
INDEX | Part Number Index
FB313-10L D7
FB315-10L D8
FB324-10L D8
FB330-10L D7
FB331-10L D8
FB337-10L D8
FB433-10L D8
FB346-10L D8
FB347-10L D7
FB348-10L D8
FB352-10L D8
FB353-10L D7
FB354-10L D8
FB355-10L D7
FB356-10L D8
FB360-10L D8
FB361-10L D8
FB364-10L D8
FB367-10L D8
FB371-10L D8
FB373-10L D7
FB374-10L D8
FB375-10L D8
FB382-10L D7
FB386-10L D8
FB387-10L D8
FB388-10L D8
FB389-10L D7
FB390-10L D8
FB391-10L D8
FB403-10L D8
FB406-10L D7
FB407-10L D8
FB410-10L D7
FB411-10L D7
FB412-10L D8
FB413-10L D7
FB424-10L D8
FB426-10L D8
FB428-10L D8
FB429-10L D8
FB431-10L D7
FB432-10L D8
FB433-10L D8
FB434-10L D8
FB445-10L D8
FB446-10L D7
FB447-10L D8
FB448-10L D8
FB449-10L D8
FB450-10L D7
FB451-10L D8
FB452-10L D8
FB453-10L D8
FM-*012BACO* B23
FM-*024CACA* B23
FM -*024CDC0B* B23, B24
FM-*012CACO+ B23
FM -*024NCC0B* B24
FM -*024NDC0B* B24
FM -*048NDC0B* B24
FM105-10L D7
FM106-10S D7
FM107-10L D7
FM204-10L D7
FM206-10L D7
FM207-10L D7
FM210-10L D7
FM310-10L D7
FM311-10L D8
FM313-10L D7
FM315-10L D8
FM324-10L D8
FM330-10L D7
FM331-10L D8
FM337-10L D8
FM346-10L D8
FM347-10L D7
FM348-10L D8
FM352-10L D8
FM353-10L D7
FM354-10L D8
FM355-10L D7
FM356-10L D8
FM360-10L D8
FM361-10L D8
FM364-10L D8
FM367-10L D8
FM371-10L D8
FM373-10L D7
FM374-10L D8
FM375-10L D8
FM376-10L D7
FM377-10L D8
FM378-10L D8
FM379-10L D7
FM380-10L D8
FM381-10L D8
FM382-10L D7
FM386-10L D8
FM387-10L D8
FM388-10L D8
FM389-10L D7
FM390-10L D8
FM391-10L D8
FM403-10L D8
FM406-10L D7
FM407-10L D8
FM410-10L D7
FM411-10L D7
FM412-10L D8
FM413-10L D7
FM424-10L D8
FM426-10L D8
FM428-10L D8
FM429-10L D8
FM431-10L D7
FM432-10L D8
FM433-10L D8
FM434-10L D8
FM445-10L D8
FM446-10L D7
FM447-10L D8
FM448-10L D8
FM449-10L D8
FM450-10L D7
FM451-10L D8
FM452-10L D8
FM453-10L D8
FME2XHD B44
FSHAT-F06 B25, B37
FSHBF-P12 B25, B37
FSHHS-P06 B25, B37
FSHHS-P08 B25, B37
FSHMI-F06 B25, B37
FSHMR-F06 B25, B37
FSHRB-F06 B25, B37
FSHSL-F06 B25, B37
FSSMI-025 B38
FSSMI-040 B38
FSSMR-025 B38
FSSMR-040 B38
FSSRB-Q40 B38
FSSSD-040 B38
FSSSD-060 B38
FSSSL-040 B38
FSSSL-060 B38
FTH00-00W F12
LF145-01W A58
LI137-*** A58
LI145-*** A58
LI150-*** A58
MH101-1D1 D10
MH122-1C2 D10
MLCPB-*LG E6
MRJPB-00* E6
MV121-1B1 D10
MV241-1D1 D10
MV242-1C2 D10
X26
LEVITON.COM/NS • Tech Support | 800.824.3005 / +1.425.486.2222
index TECH INFO
PART NO. PAGE PART NO. PAGE PART NO. PAGE
INDEX | Part Number Index
N3500-STD B34
N502H-STD B34
N5300-STD B34
OIP**-*** C3-C4
P1020-12S D12
P1021-12S D12
P1022-12L D12
P1023-12L D12
P1024-12L D12
P1025-12L D12
P1040-10S D12
P1041-10S D12
P1042-10L D12
P1043-10S D12
P1044-10L D12
P1045-10L D12
P1046-10L D12
P1047-10L D12
P1070-10S D12
P1071-10S D12
P1072-10L D12
P1073-10S D12
P1074-10L D12
PCI65-KIT F28
PCORD-*** D10
PDURK-*** D5, D11
PJ26-*** A63, F25
PJ262-*** A63, F25
PPRTN-*LG B62
RE640-*** A52, F23
REWM1-STS A52
REWM2-STS A52
REWP1-*** A52, F23
REWP2-*** A52, F23
REWP3-*** A52, F23
REWP4-*** A52, F23
RPL-******PLC3 B42
S1LRU-000 C11
S1RMK-000 C11
S25RT-02M C10
S2CUT-TOL C12
S2DCT-*** C6
S2DMB-000 C11
S2DRP-*** C9
S2END-*** C10
S2FSL-INL C9
S2HCR-*** C8
S2HEL-*** C8
S2HTE-*** C8
S2JNR-SLT C8
S2TRM-TRM C9
S2VEL-*** C8
S2VTE-*** C8
S4ADP-*** C10
S4CUT-TOL C12
S4DCT-*** C6
S4DMB-000 C11
S4DRP-DRP C9
S4END-*** C10
S4EXT-KIT C11
S4FSL-*** C9
S4HCR-*** C8
S4HEL-*** C8
S4HTE-*** C8
S4JNR-*** C8
S4LRU-000 C11
S4MNT-KIT C11
S4RDR-*** C10
S4RMK-000 C11
S4SUS-KIT C11
S4TRM-TRM C9
S4VEL-*** C8
S4VTE-*** C8
S50RT-*** C10
S50ST-350 C10
S5STC-350 C10
S8ADP-*** C10
S8DCT-*** C6
S8DMB-000 C11
S8END-*** C10
S8EXT-KIT C11
S8FSL-*** C9
S8HCR-*** C8
S8HEL-*** C8
S8HTE-*** C8
S8JNR-*** C8
S8LRU-000 C11
S8MNT-KIT C11
S8RDR-*** C10
S8RMK-000 C11
S8SUS-KIT C11
S8VEL-*** C8
S8VTE-*** C8
SGAMP-000 F30
SGC65-*** F28
SGI65-*** F28
SGO99-00W F28
SGO99-GRL F28
SGVCK-*** F30
SGVSM-00W F30
SGVST-00W F30
SH081-1D1 D10
SH082-1C2 D10
SMH00-SMB C11
SMTRE-*** C12
SPLMT-HKT B25, B37
SPLCS-*** B25
SPSCS-*** B25
SRAGD-SLT C6
SRJ6*-*** A34
SRJET-00* A34, E6
SRJPB-00* A34
SSLOT-*** C12
SV161-1D1 D10
SV162-1C2 D10
SWDCT-*** C6
SWDMB-000 C11
SWEND-CSL C10
SWHCR-*** C8
SWHEL-*** C8
SWHTE-*** C8
SWJNR-*** C8
SWRDR-*** C10
SWRMK-000 C11
SWSUS-*** C11
SWVEL-*** C8
SWVTE-*** C8
T47BF-P06 B37, B38
T47HS-P06 B25, B37, B38
T4LBF-P06 B25, B37, B38
T4LBF-P12 B37, B38
T4LHS-F06 B37, B38
T4LHS-F12 B37, B38
T4LHS-P06 B37, B38
T4LHS-P12 B37, B38
T5630-00W F32
T5LBF-P06 B37, B38
T5LBF-P12 B37, B38
T5LHS-B12 B37, B38
T5LHS-F06 B37, B38
T5LHS-F12 B37, B38
T5LHS-P06 B37, B38
T5PLS-12F B25
T5PLS-24F B10, B25
T6XRB-40Q B37, B38
TCORD-010 D10
UPDCL-*** B57
UPDCT-*** B57
UPDLC-*** B57
UPDSC-*** B57
UPDST-*** B57
UPPLC-KIT B57
UPPLC-S03 B57
UPPSC-KIT B57
UPPSC-S03 B57
UPPST-S03 B57
VERPB-019 B42
W1000-*** C22
Z1000-*** C21
X27 LEVITON.COM/NS • 800.722.2082 / +1.425.486.2222
index TECH INFO
© Copyright Leviton Manufacturing Co., Inc. 2014. All rights reserved. All unauthorized quotation and reproduction is forbidden except for brief examples
used in reviews of this work by periodical publications where the source of information is credited to Leviton, or the reproduction of this material for
the purpose of preparing specifications and/or bids in which Leviton products are indicated. To request permission, please contact the Leviton Network
Solutions marketing department at +1.425.486.2222.
Information in this catalog is provided as a guide to product selection and is believed to be correct at time of publication. Because Leviton engages in a
continuous program of product improvement, data is subject to change without notice.
®
1
The following are trademarks of Leviton Manufacturing Company, Inc.:
Other trademarks used in this catalog are registered as follows:
Aironet® is a registered trademark of Cisco Systems, Inc.
AirPort Express®, iPod®, iPad®, and iPhone® are trademarks of
Apple Inc., registered in the U.S. and other countries.
Allsteel® is a registered trademark of Allsteel, Inc.
Amphenol™ is a trademark of Amphenol Corporation.
BIX® is a registered trademark of Nortel.
Blu-ray™ and Blu-ray Disc™ are trademarks of the Blu-ray Disc Association.
Cisco, the Cisco logo, and Cisco Systems are trademarks or registered
trademarks of Cisco Systems, Inc. and/or its affiliates in the United
States and certain other countries.
Clipsal® is a registered trademark of Schneider Electric (Australia)
Pty Ltd.
D’Gel® is a registered trademark of Illinois Tool Works.
Elliptical Oblate Spheroidal™, PolyPlas™, and Straight-Line Signal Path™
are trademarks of Harman International Industries, Inc.
Ethospace® and Action Office® are registered trademarks of
Herman Miller, Inc.
EZ-RJ45® is a registered trademark of SullStar Technologies, Inc.
JBL® is a registered trademarks of Harman International Industries, Inc.
Haworth® is a registered trademark of Haworth, Inc.
HDMI® is a registered trademark of HDMI Licensing, LLC.
JackRapid™ is a trademark of Fluke Networks.
Kevlar® is a registered trademark of DuPont or its affiliates.
Klein Tools® is a registered trademark of Klein Tools, Inc.
Knoll® is a registered trademark of Knoll, Inc.
Krone® is a registered trademark of Krone, Inc.
LGX® is a registered trademark of Furukawa.
MTP® is a registered trademark of US Conec, Ltd.
Series 9000® and Avenir® are registered trademarks of Steelcase, Inc.
Straight-Line™ and Elliptical Oblate Spheroidal™ are trademarks of
Harman International Industries, Inc.
SYSTIMAX® and Uniprise® are registered trademarks of CommScope, Inc.
Teknion® is a registered trademark of Teknion Corporation.
VELCRO® is a registered trademark of Velcro Industries B.V.
Westinghouse® is a registered trademark of Westinghouse Corporation.
Wi-Fi® is a registered trademark of Wi-Fi Alliance.
Windows XP
®
and Visio
®
are registered trademarks of Microsoft Corporation.
All other trademarks, service marks, and logos used in this catalog
are the property of their respective owners.
AutoSurge®
Cheetah Speed
System®
Cone of Silence®
Decora®
DuraPort®
Excella®
eXtreme®
ez-Learn™
FastCAM®
Fast-Cure®
GigaMax®
Home 5e®
Intact™
Leviton Architectural
Edition®
LightSpace®
Opt-X®
Opt-X Ultra®
QuickPack®
QuickPort®
Renu®
Replicator®
ROii®
Spec-Grade™
Structured Media®
Thread-Lock®
Versa-Cleave®
Versi-Duct®
VertiGO®
For Leviton warranty information, please visit leviton.com/warranties.
Manufactured in the US
and Supported by International Offices and Sales
Locations Across More than 80 Countries
The Smart Choice for a Better Network
High-performance connectivity backed by the industry’s best service and support.
We invent the industry’s best technologies. We build them to last. And we stand
behind every product and every installation – delivering industry-leading performance
and unbeatable service and support – throughout the life of your structured cabling
system. Add in the peace of mind that comes from working with a stable, century-old
supplier, and you get far and away the highest return on investment in the industry.
Leviton Network Solutions Division Headquarters
leviton.com/networksolutions
|
2222 - 222nd Street S.E., Bothell, WA 98021 USA
Inside Sales
800.722.2082
insidesales@leviton.com
International Inside Sales
+1.425.486.2222
intl@leviton.com
Technical Support
800.824.3005 / +1.425.486.2222
appeng@leviton.com
Leviton Corporate Headquarters
leviton.com
|
201 N. Service Road, Melville, NY 11747 USA
Customer Service
800.323.8920 / +1.631.812.6000
customerservice@leviton.com
Leviton International Oces
Asia / Pacific
+1.631.812.6228
infoasean@leviton.com
Colombia
+57.1.743.6045
infocolombia@leviton.com
Mexico
+52.55.5082.1040
lsamarketing@leviton.com
Canada
+1.514.954.1840
pcservice@leviton.com
Europe
+33.6.8869.1380
infoeurope@leviton.com
Middle East & Africa
+971.4.886.4722
lmeinfo@leviton.com
Caribbean
+1.954.593.1896
infocaribbean@leviton.com
India / SAARC
+91.80.4322.5678
infoindia@leviton.com
South Korea
+82.2.3273.9963
infokorea@leviton.com
China
+852.2774.9876
infochina@leviton.com
Latin America
+52.55.5082.1040
lsamarketing@leviton.com
All Other International Inquiries
international@leviton.com
4500A / K13
