Product Detail Manual
1000294376-Brochure 1000294376-Brochure 1000294376-Brochure B5 unilog cesco-content
166961-Brochure 166961-Brochure 166961-Brochure B5 unilog cesco-content
118547-Attachment 118547-Attachment 118547-Attachment 784231 Batch12 unilog cesco-content
240956-Attachment 240956-Attachment 240956-Attachment 784231 Batch5 unilog cesco-content
2016-08-16
: Pdf 1000338801-Attachment 1000338801-Attachment B3 unilog
Open the PDF directly: View PDF 
.
Page Count: 2
Catalog
Number
Notes
Type
OUTDOOR POLE-SSS
FEATURES & SPECIFICATIONS
INTENDED USE — Square straight steel pole for up to 39-foot mounting height.
CONSTRUCTION — Weldable-grade, hot-rolled, commercial-quality carbon steel tubing with a minimum
yield of 55,000 psi (11-gauge), or 50,000 psi (7-gauge). Uniform wall thickness of .1196" or .1793". Shaft
is one-piece with a full-length longitudinal high-frequency electric resistance weld. Uniformly square in
cross-section with at sides, small corner radii and excellent torsional qualities. Available shaft widths are
4, 5 and 6 inches.
Anchor base is fabricated from hot-rolled carbon steel plate conforming to ASTM A36, that meets or exceeds a
minimum-yield strength of 36,000 psi. Base plate and shaft are circumferentially welded top and bottom.
Base cover is nished to match pole.
A handhole having nominal dimensions of 3" x 5" for all shafts. Included is a cover with attachment screws.
Top cap provided with all drill-mount and open top "PT" poles.
Fasteners are high-strength galvanized, zinc-plated or stainless steel.
Finish: Must specify nish.
Grounding: Provision located immediately inside handhole rim. Grounding hardware is not included
(provided by others).
Anchor bolts: Top portion of anchor bolt is galvanized per ASTM A-153. Made of steel rod having a minimum
yield strength of 55,000 psi.
Note: Specications subject to change without notice.
Actual performance may dier as a result of end-user environment and application.
Anchor Base Poles
SSS
SQUARE STRAIGHT STEEL
IMPORTANT INSTALLATION NOTES:
• Do not erect poles without having xtures
installed.
• Factory-supplied templates must be used
when setting anchor bolts. Lithonia Lighting
will not accept claim for incorrect anchorage
placement due to failure to use Lithonia
Lighting factory templates.
• If poles are stored outside, all protective
wrapping must be removed immediately
upon delivery to prevent nish damage.
• Lithonia Lighting is not responsible for the
foundation design.
SSS
NOTES:
1. PT open top poles include top cap. When ordering tenon mounting
and drill mounting for the same pole, follow this example: DM28/
T20. The combination includes a required extra handhole.
2. The drilling template to be used for a particular luminaire depends
on the luminaire that is used. Refer to the Technical Data Section of
the Outdoor Binder for Drilling Templates.
3. Insert "1" or "2" to designate xture size; e.g. DM19AST2.
4. Specify location and orientation when ordering option.
For 1st "x": Specify the height in feet above base of pole.
Example: 5ft = 5 and 20ft = 20
For 2nd "x": Specify orientation from handhole (A,B,C,D)
Refer to the Handhole Orientation diagram above.
HANDHOLE ORIENTATION
A
Handhole
B
C
D
SSS
Series
Nominal xture
mounting height
Nominal shaft base
size/wall thickness Mounting1Options Finish10
SSS
10 – 39 feet
(See back page.)
(See back page.) Tenon mounting
PT Open top (includes
top cap)
T20 2-3/8" O.D. (2" NPS)
T25 2-7/8" O.D. (2-1/2" NPS)
T30 3-1/2" O.D. (3" NPS)
T35 4" O.D. (3-1/2" NPS)
Drill mounting2
DM19 1 at 90°
DM28 2 at 180°
DM28 PL 2 at 180° with one side
plugged
DM29 2 at 90°
DM39 3 at 90°
DM49 4 at 90°
CSX/DSX/AERIS™/OMERO™ Drill
mounting2
DM19AS 1 at 90°
DM28AS 2 at 180°
DM29AS 2 at 90°
DM39AS 3 at 90°
DM49AS 4 at 90°
AERIS™ Suspend drill
mounting2, 3
DM19AST_ 1 at 90°
DM28AST_ 2 at 180°
DM29AST_ 2 at 90°
DM39AST_ 3 at 90°
DM49AST_ 4 at 90°
OMERO™ Suspend drill
mounting2, 3
DM19MRT_ 1 at 90°
DM28MRT_ 2 at 180°
DM29MRT_ 2 at 90°
DM39MRT_ 3 at 90°
DM49MRT_ 4 at 90°
Shipped installed
L/AB Less anchor bolts
VD Vibration damper
TP Tamper proof
H1-18Sxx Horizontal arm bracket
(1 xture)4, 5
FDLxx Festoon outlet less
electrical4
CPL12xx 1/2" coupling4
CPL34xx 3/4" coupling4
CPL1xx 1" coupling4
NPL12xx 1/2" threaded nipple4
NPL34xx 3/4" threaded nipple4
NPL1xx 1" threaded nipple4
EHHxx Extra handhole4, 6
MAEX Match existiing 7
USPOM United States point of
manufacture8
IC Interior coating9
Standard colors
DDB Dark bronze
DWH White
DBL Black
DMB Medium bronze
DNA Natural aluminum
Classic colors
DSS Sandstone
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSB Steel blue
Architectural colors (powder
nish)10
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: SSS 20 5C DM19 DDB
5. Horizontal arm is 18" x 2-3/8" O.D. tenon standard.
6. Combination of tenon-top and drill mount includes extra
handhole.
7. Must add original order number
8. Use when mill certications are required.
9. Provides enhanced corrosion resistance.
10. Additional colors available; see www.lithonia.com/archcolors
or Architectural Colors brochure (Form No. 794.3). Powder
nish standard.
POLE-SSS
OUTDOOR: One Lithonia Way Conyers, GA 30012 Phone: 800-279-8041 Fax: 770-981-1209 www.lithonia.com ©1994-2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/08/12
SSS Square Straight Steel Poles
IMPORTANT:
• These specications are intended for general purposes only. Lithonia reserves the right to change material or design,
without prior notice, in a continuing eort to upgrade its products.
BASE DETAIL
18"
A
C
TECHNICAL INFORMATION
EPA (ft2) with 1.3 gust
Catalog Number Nominal
mount ht. (ft)
Pole Shaft Size
(in x ft)
Wall Thickness
(in) Gauge 80 mph Max.
weight 90 mph Max.
weight 100 mph Max.
weight Bolt Circle (in) Bolt Size
(in x in x in)
Approximate
ship (lbs)
SSS 10 4C 10 4.0 x 10.0 0.1196 11 30.6 765 23.8 595 18.9 473 8--9 3/4 x 18 x 3 75
SSS 12 4C 12 4.0 x 12.0 0.1196 11 24.4 610 18.8 470 14.8 370 8--9 3/4 x 18 x 3 90
SSS 14 4C 14 4.0 x 14.0 0.1196 11 19.9 498 15.1 378 11.7 293 8--9 3/4 x 18 x 3 100
SSS 16 4C 16 4.0 x 16.0 0.1196 11 15.9 398 11.8 295 8.9 223 8--9 3/4 x 18 x 3 115
SSS 18 4C 18 4.0 x 18.0 0.1196 11 12.6 315 9.2 230 6.7 168 8--9 3/4 x 18 x 3 125
SSS 20 4C 20 4.0 x 20.0 0.1196 11 9.6 240 6.7 167 4.5 150 8--9 3/4 x 18 x 3 140
SSS 20 4G 20 4.0 x 20.0 0.1793 7 14 350 11 275 8 200 8--9 3/4 x 30 x 3 198
SSS 20 5C 20 5.0 x 20.0 0.1196 11 17.7 443 12.7 343 9.4 235 10--12 1 x 36 x 4 185
SSS 20 5G 20 5.0 x 20.0 0.1793 7 28.1 703 21.4 535 16.2 405 10--12 1 x 36 x 4 265
SSS 25 4C 25 4.0 x 25.0 0.1196 11 4.8 150 2.6 100 1 50 8--9 3/4 x 18 x 3 170
SSS 25 4G 25 4.0 x 25.0 0.1793 7 10.8 270 7.7 188 5.4 135 8--9 3/4 x 30 x 3 245
SSS 25 5C 25 5.0 x 25.0 0.1196 11 9.8 245 6.3 157 3.7 150 10--12 1 x 36 x 4 225
SSS 25 5G 25 5.0 x 25.0 0.1793 7 18.5 463 13.3 333 9.5 238 10--12 1 x 36 x 4 360
SSS 30 4G 30 4.0 x 30.0 0.1793 7 6.7 168 4.4 110 2.6 65 8--9 3/4 x 30 x 3 295
SSS 30 5C 30 5.0 x 30.0 0.1196 11 4.7 150 2 50 -- -- 10--12 1 x 36 x 4 265
SSS 30 5G 30 5.0 x 30.0 0.1793 7 10.7 267 6.7 167 3.9 100 10--12 1 x 36 x 4 380
SSS 30 6G 30 6.0 x 30.0 0.1793 7 19 475 13.2 330 9 225 11--13 1 x 36 x 4 520
SSS 35 5G 35 5.0 x 35.0 0.1793 7 5.9 150 2.5 100 -- -- 10--12 1 x 36 x 4 440
SSS 35 6G 35 6.0 x 35.0 0.1793 7 12.4 310 7.6 190 4.2 105 11--13 1 x 36 x 4 540
SSS 39 6G 39 6.0 x 39.0 0.1793 7 7.2 180 3 75 -- -- 11--13 1 x 36 x 4 605
POLE DATA
Shaft base
size
Bolt
circle
A
Bolt
projection
B
Base
square
C
Template description Anchor bolt
description
Anchor bolt and
template number
4"C 8-1/2" 2-3/4"–4" 8" ABTEMPLATE PJ50004 AB18-0 ABSSS-4C
4"G 8-1/2" 2-3/4"–4" 8" ABTEMPLATE PJ50004 AB30-0 ABSSS-4G
5" 10"–12" 3-3/8"–4" 11" ABTEMPLATE PJ50010 AB36-0 ABSSS-5
6" 11"–13" 3-3/8"–4" 12-1/2" ABTEMPLATE PJ50011 AB36-0 N/A
