Product Detail Manual

117803-Attachment 117803-Attachment 117803-Attachment 080083 Batch6 unilog cesco-content

2016-08-16

: Pdf 1000392640-Attachment 1000392640-Attachment B3 unilog

Open the PDF directly: View PDF PDF.
Page Count: 8

ML56 LED
System
900 Series / 90 CRI
ML5609927
ML5609930
ML5609935
ML5609940
5-Inch and 6-Inch
900 Lumen LED
Light Module for
New Construction,
Remodel and Retrofit
For use with 59x and 69x
Series Trims
FOR USE IN
INSULATED CEILING
AND NON-INSULATED
CEILING RATED
HOUSINGS
HIGH EFFICACY LED
WITH INTEGRAL
DRIVER - DIMMABLE
ENERGY DATA
ML56 900/90 Series
(Values at non-dimming line voltage)
Minimum Starting Temp: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 18,
(Consumer)
Sound Rating: Class A
Input Voltage: UNV 120V-277V
Power Factor: >0.95 @ 120V and >0.9 @277V
Input Frequency: 50/60Hz
THD: <20%
Max. Rated Wattage: 14W
Input Power: 13.4W
Input Current at 120V: 0.15A
Input Current at 277V: 0.08A
Driver Compliance: UL8750, Class II rated
Maximum IC (Insulated Ceiling) Ambient
Continuous Operating Temperature:
25°C (77°F)
Maximum Non-IC Ambient Continuous
Operating Temperature: 40°C (104°F)
www.cooperlighting.com
ADV121478
May 2, 2013 10:35 AM
DESCRIPTION
The Halo ML56 LED Downlighting System is a series of modular LED Light
Modules for use with dedicated 5” or 6” ML56 LED trims. The ML56 system is
suitable for new construction, remodel and retrofit installation.
The ML56 light modules and LED trims fit 5” or 6” housings including the Halo LED
5” H550 and 6” H750 Series for new construction and remodel. And for retrofit of
existing housings the ML56 Series fits the Halo 5” H5 and 6” H7 series, All-Pro 5”
ET/EI500 and 6” ET/EI700 series, and other compatible 5” and 6” housings.
In addition, for shallow ceiling housings the ML56 system offers shallow trims that
allow installation in Halo 5” H25 and 6” H27 series, All-Pro 6” EI2700 series, and
other shallow housings.
ML56 Light Module System is offered in 600 Series and 900 Series, 80CRI or 90CRI,
and four color temperatures 2700K, 3000K, 3500K, 4000K.
ML56 Light Modules are universal voltage 120V – 277V with integral LED drivers
that are dimmable at 120V. The ML56 lens provides uniform illumination and
wet location listing with reflector and baffle trims. Halo ML56 Series offers high
performance LED downlighting in a flexible modular selection.
2700K nominal
2700K
2725
3000K 3500K 4100K 5000K 6500K
3000K nominal
2700K
3045
3000K 3500K 4100K 5000K 6500
K
3500K nominal
2700K
3465
3000K 3500K 4100K 5000K 6500
K
4000K nominal
2700K
3985
3000K 3500K 4100K 5000K 6500
K
ML5609927
5” or 6“ LED 900 Series
Light Module, 90CRI / 2700K
2700K nominal
2700K
2725
3000K 3500K 4100K 5000K 6500
K
3000K nominal
2700K
3045
3000K 3500K 4100K 5000K 6500K
3500K nominal
2700K
3465
3000K 3500K 4100K 5000K 6500
K
4000K nominal
2700K
3985
3000K 3500K 4100K 5000K 6500
K
ML5609930
5” or 6“ LED 900 Series
Light Module, 90CRI / 3000K
2700K nominal
2700K
2725
3000K 3500K 4100K 5000K 6500
K
3000K nominal
2700K
3045
3000K 3500K 4100K 5000K 6500
K
3500K nominal
2700K
3465
3000K 3500K 4100K 5000K 6500K
4000K nominal
2700K
3985
3000K 3500K 4100K 5000K 6500
K
ML5609935
5” or 6“ LED 900 Series
Light Module, 90CRI / 3500K
2700K nominal
2700K
2725
3000K 3500K 4100K 5000K 6500
K
3000K nominal
2700K
3045
3000K 3500K 4100K 5000K 6500
K
3500K nominal
2700K
3465
3000K 3500K 4100K 5000K 6500
K
4000K nominal
2700K
3985
3000K 3500K 4100K 5000K 6500K
ML5609940
5” or 6“ LED 900 Series
Light Module, 90CRI / 4000K
Catalog #
Project
Comments
Prepared by
Type
Date
HALO
MECHANICAL
Light Module
Module includes LED package,
LED driver, heat sink, and lens
• Durabledie-castaluminum
construction.
• Heatsinkdesignedtoconduct
heat away from the LED keeping
the junction temperatures below
specified maximums, even when
installed in insulated ceiling
environments
Lens
• Impact-resistantpolycarbonate
• Convexformforlamp-like
appearance
• Highlumentransmission
• Diffusingforevenillumination
MOUNTING
• LightModulesattachtoreflector
and baffle trims via locking tabs,
and attach to eyeballs via keyed
twist-to-lock mating bosses
• Thecompletelightmodule 
and trim assembly installs into
housings with precision formed
torsion springs located on the
trim
• FrictionBlademountingis
an alternate option using
theaccessory6”Friction
BladeKitmodelML56CLIP
(orderseparately).Friction
blades provide alternative to
torsion springs for retrofit in
6” housings without torsion
mounting tabs. The stainless
steel friction blades allow the
ML56 to be installed in a wider
range of housings, and allow
rotation in the housing aperture
(360 degrees).
Housing Compatibility
A complete ML56 system
includes a LED Light Module, LED
trim, and a compatible housing
(new construction, remodel,
or existing retrofit). Housing
compatibility in the ML56 System
is determined by the ML56 trim
dimensions. ML56 trims are
available in 5” and 6” aperture
(5” = 59xx series and 6” = 69xx
series trims). Refer to Housing
– Trim Compatibility in this
document.
LED
•900Series=900designlumens
•900Series90CRI=470-888
delivered lumens
(Design lumens typical for
respective series light modules.
Delivered lumens vary
depending upon 5" or 6", color
temperature, and trim finish
selected.)
•ColorTemperatureoptions:
2700K, 3000K, 3500K, 4000K
•CRI:90
•LumenMaintenance:L70/B50
70% lumens / 50,000 hours
•Efficacy:upto66Lumensper
Watt
•LEDisachiponboarddesign
consisting of a multiple LED
package to create one virtual
light source for a productive
“cone of light”
COLOR SPECIFICATION &
QUALITY STANDARDS
•Haloemploysatight
chromaticity specification to
ensure LED color uniformity,
sustainable Color Rendering
Index (CRI) and Correlated Color
Temperature (CCT) consistency
over the useful life of the LED
•HaloLEDchromaticity
specification of 3 SDCM initial
and 5 SDCM life exceeds
ENERGY STAR® color
standards per ANSI C78.377-
2008.
•EveryHaloLEDLightModuleis
quality tested and performance
measured, and then serialized
in a permanent record to
register lumens, wattage, CRI
and CCT.
•HaloLED’sserializedtestingand
measurement process ensures
color and lumen consistency
on a per-unit basis, and also
validates long-term product
consistency over time
•HaloML56LEDLightModules
include lumen, CRI, and CCT
designations in the model
number
•Example:ML5606830
56 09 9 30
56 = 5” / 6” aperture series
09 = 900 lumen
9 = >90 CRI
30 = 3000K nominal CCT
ELECTRICAL POWER
CONNECTIONS
• LEDconnectorisanon-screw
base luminaire disconnect
offering easy installation with
the matching Halo 5” H550
Series and 6” H750 Series
housings (housing selected
depends upon LED trim 5”
or 6”).
•LEDConnectormeetsCalifornia
Title-24 high-efficacy luminaire
requirement for a non-screw
base socket, and where
required to qualify as a high-
efficacy luminaire.
•TheincludedE26medium
screw-base Edison adapter
provides easy retrofit of
incandescent housings (see
Housing Compatibility).
SPECIFICATION FEATURES
SPECIFICATION FEATURES continued
Ground Connection
• Separategroundingcable
included on the module for
attachment to the housing
during installation.
LED Driver
• Driverisuniversalvoltage
120V-277V, and may be
controlled from a switch in
this range of main inputs
(switchable at 120V, 220V, 230V,
240V, and 277V)
• Driverisdimmableat120V
operation when connected to a
compatible dimmer.
• Driverisahighefficiency,
electronic power supply
providing DC power to the LED.
• DrivermeetsFCCEMI/RFI
Consumer Level limits on 120V
main inputs, and is suitable
for use in residential and
commercial installations.
• Driverfeatureshighpower
factor, low THD, and has
integral thermal protection in
the event of over temperature
or internal failure.
• Driverisreplaceable,if
replacement should be
required.
Dimming
• HaloML56LEDSystem
is designed for dimming
capability to 15% in normal
operation with standard 120V
electronic low voltage, LED-
Rated, and many incandescent
dimmers. The ML56 Light
Module has dimming capability
to 5% with select dimmers
with low end trim adjustment.
(Consult dimmer manufacturer
for dimmer compatibility and
details. Note, some dimmers
require a neutral in the
wallbox.)
Warranty
• CooperLightingprovidesa
(5) five year limited warranty
on the Halo ML56 LED Light
Module.
LED Module in New or Retrofit
Existing Construction – Housings
other than Halo or All-Pro
• Ifusedinrecessedhousings
other than Halo or All-Pro the
Cooper Lighting 5-year limited
warranty applies to the LED
Light Module and Trim only.
• Aswithanyelectrical
installation, a qualified
electrician must ensure
compatibility of use with a
particular housing; this includes
all applicable national and
local electrical and building
codes. Installer is responsible
to properly and securely retain
the LED Module and LED
Trim in the housing at time of
installation.
COMPLIANCE
Labels
• UL/cULListed1598Luminaire
(Halo and All-Pro housings)
• CEMarking-“Conformité
 Européene”conformitywith
the Council of European
Communities Directives,
meeting internationally
recognized compliance when
used with H550 and H750 LED
housings
• UL/cULListedforDamp
Location
• UL/cULListedforWetLocation
(Protected Ceiling) with baffle
and reflector trims
• IP66ratedwithbaffleand
reflector trims
• RoHSCompliant
• MaybeinstalledinIChousings
in direct contact with air
permeable insulation and
combustible material
• ULClassifiedwhenusedin
retrofit with listed housings
(See Housing Compatibility)
Qualification
• ENERGYSTAR® qualified as
registered in the “ENERGY
STAR® Qualified Products List”
• MaybeusedforStateof
California Title 24 high efficacy
LED luminaire compliance,
as registered in the State of
California Energy Commission
“Appliance Database”
• MaybeusedforInternational
Energy Conservation Code
(IECC) high efficacy luminaire
compliance
• MaybeusedforWashington
State Energy Code (WSEC) high
efficacy luminaire compliance
AIR-TITE™
Certified under ASTM-E283
to meet insulated ceiling and
restricted air-flow requirements
such as:
• InternationalEnergy
Conservation Code (IECC)
• WashingtonStateEnergyCode
(WSEC)
• NewYorkStateEnergy
Conservation Construction
Code (NY-ECCC)
• StateofCaliforniaTitle24
“Recessed Luminaires in
Insulated Ceilings”
ML56 LED
System
900 Series / 90 CRI
ML5609927
ML5609930
ML5609935
ML5609940
5-Inch and 6-Inch
900 Lumen LED
Light Module for
New Construction,
Remodel and Retrofit
For use with 59x and 69x
Series Trims
FOR USE IN
INSULATED CEILING
AND NON-INSULATED
CEILING RATED
HOUSINGS
HIGH EFFICACY LED
WITH INTEGRAL
DRIVER - DIMMABLE
DIMENSIONS
ML56 LED System
900 Series / 90 CRI
4-1/2"
[114 mm]
3"
[76 mm]
www.cooperlighting.com
Qualied and compliant. Refer to ENERGY STAR®
Qualied Products List and CEC (T24) Appliance
Database for listings.
ML56 LED System
900 Series / 90 CRI
ORDERING INFORMATION
SAMPLE NUMBER: ML5609930 593WB
Order LED Module and trim separately.
A complete system also includes a compatible housing (new construction, remodel, or existing retrot). Housing compatibility in the ML56 System is determined by the ML56 trim dimensions.
ML56 trims are available in 5” and 6” aperture (5” = 59xx series and 6” = 69xx series trims). Refer to Housing – Trim Compatibility in this document.
ML56 LED Light Modules
900 Series / 90 CRI
ML56 LED 5" and 6" Trims ML56 System Accessories
ML5609927= 5"/6" LED Retrot Downlight
Light Module, 900 lumen,
90CRI, 2700K
ML5609930= 5"/6" LED Retrot Downlight
Light Module, 900 lumen,
90CRI, 3000K
ML5609935= 5"/6" LED Retrot Downlight
Light Module, 900 lumen,
90CRI, 3500K
ML5609940= 5"/6" LED Retrot Downlight
Light Module, 900 lumen,
90CRI, 4000K
590 Series - 5" LED Trims
591WB=5" LED Trim, Polymer “Dead-Front”, Shallow White Bafe & Flange – Shallow
and Standard housings
(For use with 600 Series LED Light Modules only)
592SC=5" LED Trim, Specular Reector & White Flange
592H=5" LED Trim, Haze Reector & White Flange
592W=5" LED Trim, White Reector & Flange
593WB=5" LED Trim, White Micro-Step Bafe & Flange
593BB=5" LED Trim, Black Micro-Step Bafe & White Flange
593SNB=5" LED Trim, Satin Nickel Micro-Step Bafe & Flange
593TBZB=5" LED Trim, Tuscan Bronze Micro-Step Bafe & Flange
594WB=5" LED Directional Trim, White Eyeball, Bafe & Flange – Shallow and
Standard Housings
594SNB=5" LED Directional Trim, Satin Nickel Eyeball, Bafe & Flange – Shallow and
Standard Housings
594TBZB=5" LED Directional Trim, Tuscan Bronze Eyeball, Bafe & Flange – Shallow
and Standard Housings
595WW=5" LED Trim, Wall Wash - Specular Reector, Repositionable Specular Kick
Reector, White Flange
596WB=5" LED Trim, White Shallow Bafe & Flange – Shallow and Standard
Housings
690 Series - 6" LED Trims
691WB=6" LED Trim, Polymer “Dead-Front”, White Shallow Bafe & Flange – Shallow
and Standard housings
(For use with 600 Series LED Light Modules only)
692SC=6" LED Trim, Specular Reector & White Flange
692H=6" LED Trim, Haze Reector & White Flange
692W=6" LED Trim, White Reector & Flange
693WB=6" LED Trim, White Micro-Step Bafe & Flange
693BB=6" LED Trim, Black Micro-Step Bafe & White Flange
693SNB=6" LED Trim, Satin Nickel Micro-Step Bafe & Flange
693TBZB=6" LED Trim, Tuscan Bronze Micro-Step Bafe & Flange
694WB=6" LED Directional Trim, White Eyeball, Bafe & Flange – Shallow and
Standard Housings
694SNB=6" LED Directional Trim, Satin Nickel Eyeball, Bafe & Flange – Shallow and
Standard Housings
694TBZB=6" LED Directional Trim, Tuscan Bronze Eyeball, Bafe & Flange – Shallow
and Standard Housings
695WW=6" LED Trim, Wall Wash - Specular Reector, Repositionable Specular Kick
Reector, White Flange
696WB=6" LED Trim, White Shallow Bafe & Flange – for use with Shallow and
Standard Housings
ML56CLIP=Friction Clip Mounting Kit - For retrotting
non-torsion spring housings, 6" clips*
WW595SC=5" Wall Wash Insert - Kick Reector for
595WW (1-included with trim) Double or
Corner Wall Wash**
WW695SC=6" Wall Wash Insert - Kick Reector for
695WW (1-included with trim) Double or
Corner Wall Wash**
TRM590WH= 5" LED Oversize Trim Ring for use with
59* series trims, White 6.3" I.D., 7.5"
O.D.
Ring slips over LED trim. Inset design
allows 5" trim to t into oversize ring for
an even trim surface
TRM690WH= 6" LED Oversize Trim Ring for use with
69* series trims, White 6.9" I.D., 9.5" O.D.
Ring slips over LED trim. Inset design
allows 6" trim to t into oversize ring for
an even trim surface
*ML56CLIP is compatible with 6" bafe and reector
trims only (691, 692, 693, 695, 696 series).
For eyeball trim (694 series) use ML7RAB retrot
adpater band.
**Wall Wash Trims 595WW and 695WW Feature an
exclusive Repositionable Kick Reector for ne-tuning
adjustment of the wall wash effect. The WW595SC
and WW695SC are Repositionable Kick Reectors
sold separately for addition to the Wall Wash Trim
when a double or corner wall wash is needed, or for
replacement of original kick reector included with the
trim.
LIGHTING FACTS
ML5609927 ML5609930 ML5609935 ML5609940
www.cooperlighting.com
HOUSING – TRIM COMPATIBILITY
Housing compatibility in the ML56 System is determined by the ML56 trim dimensions. ML56 trims are available in 5" and 6" aperture (5" = 59xx series and 6" = 69xx series trims).
Refer to ML56 TRIMS in this document. (Note “X” in the trim model number denotes nish code.)
Halo and All-Pro UL Listed Compatibility
6” Trims: 691X, 692X, 693X, 694X, 695X, 696X
(Note shallow housings for use with 691X, 694X, 696X trims only)
HALO - LED Housings with LED luminaire connector - high-efficacy compliant
HALO
Catalog Number Description
Standard Housings
H750ICAT 6" LED, Insulated Ceiling, AIR-TITE, New Construction Housing
H750RICAT 6" LED, Insulated Ceiling, AIR-TITE, Remodel Housing
H750T 6" LED, Non-IC, AIR-TITE, New Construction Housing
H750TCP 6" LED, Non-IC, New Construction/Remodel Chicago Plenum Housing
H750TD010 6" LED, Non-IC, AIR-TITE, New Construction Housing
H750RTD010 6" LED, Non-IC, AIR-TITE, Remodel Housing
H750TCPD010 6" LED, Non-IC, New Construction/Remodel Chicago Plenum Housing
H750RINTD010 6" LED, Non-IC, AIR-TITE, Remodel Housing (International CE Mark and UL/cUL Listed)
Shallow Housings
H2750ICAT 6” LED, Shallow, Insulated Ceiling, AIR-TITE, New Constr. (use with 691X, 694X, 696X trims only)
HALO and All-Pro - Incandescent E26 Screwbase Housings
HALO
Catalog Number Description
Standard Housings
H7ICAT 6” Insulated Ceiling, AIR-TITE New Construction Housing
H7RICAT 6” Insulated Ceiling, AIR-TITE Remodel Housing
H7ICT 6” Insulated Ceiling, New Construction Housing
H7RICT 6” Insulated Ceiling, Remodel Housing
H7ICATNB 6” Insulated Ceiling, AIR-TITE New Construction Housing, No Socket Bracket
H7ICTNB 6” Insulated Ceiling, New Construction Housing, No Socket Bracket
H7T 6” Non-IC, New Construction Housing
H7RT 6” Non-IC, Remodel Housing
H7TNB 6” Non-IC, New Construction Housing, No Socket Bracket
H7TCP 6” Non-IC, Chicago Plenum, New Construction/Remodel Housing
H7UICT 6” Insulated Ceiling, Universal New Construction Housing
H7UICAT 6” Insulated Ceiling, Universal, AIR-TITE, New Construction Housing
ALL-PRO
EI700AT 6” Insulated Ceiling, AIR-TITE New Construction Housing
EI700RAT 6” Insulated Ceiling, AIR-TITE Remodel Housing
EI700 6” Insulated Ceiling, New Construction Housing
EI700R 6” Insulated Ceiling, Remodel Housing
EI700ATNB 6” Insulated Ceiling, AIR-TITE New Construction Housing, No Socket Bracket
EI700NB 6” Insulated Ceiling, New Construction Housing, No Socket Bracket
EI700U 6” Insulated Ceiling, Universal New Construction Housing
EI700UAT 6” Insulated Ceiling, Universal, AIR-TITE, New Construction Housing
ET700 6” Non-IC, New Construction Housing
ET700R 6” Non-IC, Remodel Housing
ML56 LED System
900 Series / 90 CRI
www.cooperlighting.com
HOUSING – TRIM COMPATIBILITY - continued
ML56 LED System
900 Series / 90 CRI
HALO and All-Pro - Incandescent E26 Screwbase Housings - continued
HALO
Catalog Number Description
Shallow Housings
H27ICAT 6” Shallow, Insulated Ceiling, AIR-TITE New Construction (use with 691X, 694X, 696X trims only)
H27RICAT 6” Shallow, Insulated Ceiling, AIR-TITE Remodel Housing (use with 691X, 694X, 696X trims only)
H27ICT 6” Shallow, Insulated Ceiling, New Construction Housing (use with 691X, 694X, 696X trims only)
H27RICT 6” Shallow, Insulated Ceiling, Remodel Housing (use with 691X, 694X, 696X trims only)
H27T 6” Shallow, Non-IC, New Construction Housing (use with 691X, 694X, 696X trims only)
H27RT 6” Shallow, Non-IC, Remodel Housing (use with 691X, 694X, 696X trims only)
ALL-PRO
EI2700AT 6” Shallow, Insulated Ceiling, AIR-TITE New Construction (use with 691X, 694X, 696X trims only)
EI2700 6” Shallow, Insulated Ceiling, New Construction Housing (use with 691X, 694X, 696X trims only)
EI2700R 6” Shallow, Insulated Ceiling, AIR-TITE Remodel Housing (use with 691X, 694X, 696X trims only)
ET2700 6” Shallow, Non-IC, New Construction Housing (use with 691X, 694X, 696X trims only)
ET2700R 6” Shallow, Non-IC, Remodel Housing (use with 691X, 694X, 696X trims only)
Halo LED Retrofit Enclosures
HALO
Catalog Number Description
ML7BXRFK 6” Retrofit Enclosure, Non-IC, BX Whip
ML7E26RFK 6” Retrofit Enclosure, Non-IC, E26 Screw base Interface
5” Trims: 591X, 592X, 593X, 594X, 595X, 596X
(Note shallow housings for use with 591X, 594X, 596X trims only)
HALO - LED Housings with LED luminaire connector - high-efficacy compliant
HALO
Catalog Number Description
H550ICAT 5" LED, Insulated Ceiling, AIR-TITE, New Construction Housing
H550RICAT 5" LED, Insulated Ceiling, AIR-TITE, Remodel Housing
HALO and All-Pro - Incandescent E26 Screwbase Housings
HALO
Catalog Number Description
Standard Housings
H5ICAT 5” Insulated Ceiling, AIR-TITE New Construction Housing
H5RICAT 5” Insulated Ceiling, AIR-TITE Remodel Housing
H5T 5” Non-IC, New Construction Housing
H5RT 5” Non-IC, Remodel Housing
H5TM 5” Non-IC, New Construction Housing (Canada)
ALL-PRO
EI500AT 5” Insulated Ceiling, AIR-TITE New Construction Housing
EI500RAT 5” Insulated Ceiling, AIR-TITE Remodel Housing
ET500 5” Non-IC, New Construction Housing
ET500R 5” Non-IC, Remodel Housing
HALO Shallow Housings
H25ICAT 5” Shallow, Insulated Ceiling, AIR-TITE New Construction (use with 591X, 594X, 596X trims only)
www.cooperlighting.com
HOUSING – TRIM COMPATIBILITY
ML56 LED System
900 Series / 90 CRI
HOUSINGS - UL Classified for retrofit compatibility
6” Trims: 691X, 692X, 693X, 694X, 695X, 696X
(Note shallow housings for use with 691X, 694X, 696X trims only)
Juno
Standard Housings
IC22, IC22R, IC22W, IC22S, IC23, IC23W, TC2, TC2R, IC2
Shallow Housings (use with 691X, 694X, 696X trims only)
IC21, IC21R
Capri
Standard Housings
CR1, PR1, QL1
Shallow Housings (use with 691X, 694X, 696X trims only)
R9ASIC/PS9RM
Elco HL7ICA (EL7ICA)
Lithonia
Standard Housings
LC6, L7X
Shallow Housings (use with 691X, 694X, 696X trims only)
L7XP
Thomas PS1
Commercial
Electric C7ICA, H3
Progress
Standard Housing
P87-AT †*
Shallow Housing (use with 691X, 694X, 696X trims only)
P86TG
Lightolier 1104ICS †*, 1104ICR †*
† Requires replacement of torsion springs with Friction Clips. Order Friction Clip Kit separately: ML56CLIP
* ML56CLIP is compatible with only baffle and reflector trims.
5” Trims: 591X, 596X
Juno Standard Housings
IC20, IC25S, IC25W, TC20
www.cooperlighting.com
PHOTOMETRY
ML56 LED System
900 Series / 90 CRI
www.cooperlighting.com
SINGLE UNIT FOOTCANDLES
2.5' FROM WALL
(Distance From Fixture Along Wall)
DD 1' 2' 3' 4' 5' 6'
1' 2.7 1.8 0.7 0.2 0.1 0 0
2' 9.6 73.1 10.3 0.1 0
3' 11.6 9.5 52.2 0.8 0.3 0.1
4' 8.3 7.5 5.3 2.9 1.3 0.5 0.2
5' 5.6 5.2 4.1 2.8 1.6 0.8 0.4
6' 3.7 3.5 32.3 1.6 0.9 0.5
7' 2.6 2.5 2.2 1.8 1.4 0.9 0.6
8' 1.9 1.8 1.6 1.4 1.1 0.8 0.6
9' 1.4 1.3 1.2 1.1 0.9 0.7 0.5
10' 1 1 1 0.9 0.7 0.6 0.5
MULTIPLE UNIT FOOTCANDLES
2.5' FROM WALL
(Distance From Fixture Along Wall)
DD --3'-- --4'--
1' 2.9 2.3 2.9 2.7 1.3 2.7
2' 10.6 9.9 10.6 9.9 6.2 9.9
3' 13.7 14.4 13.7 12.4 10 12.4
4' 11.2 12.9 11.2 9.6 10.6 9.6
5' 8.4 9.4 8.4 7.2 8.2 7. 2
6' 66.6 65.3 6.1 5.3
7' 4.4 4.7 4.4 3.9 4.4 3.9
8' 3.3 3.5 3.3 33.3 3
9' 2.5 2.6 2.5 2.3 2.5 2.3
10' 1.9 21.9 1.8 1.9 1.8
ML5609930-595WW
Test Number P93099
Light Module 900 Series, 90CRI
Trim
5” Aperture, Wall Wash with
Specular Clear Trim and Specular
Clear Kick Reflector
Lumens 736.5
Efficacy 56.2 Lm/W
SC 1.07
ZONAL LUMEN SUMMARY
Zone Lumens %Fixture
0-30 363.45 49.30
0-40 546.91 74.30
0-60 717.9 0 97.50
0-90 736.48 100.0
90-180 00.0
0-180 736.48 100.0
MULTIPLIER TABLE
CCT Option 2700K 3000K 3500K 4000K
CCT Multiplier 0.96 1.00 1.03 1.09
Table based upon testing with 3000K color temperature, 90CRI.
Multipliers may be used to determine relative lumen values with other color temperatures.
CANDLEPOWER DISTRIBUTION
Wall Wash Downlight
15º0º
180
360
540
30º
45º
60º
75º
90º
Photometric tests are per IES measurement standards. Tests represent typical fixture performance.
Field results may vary.
Legend
0-deg: Wall
90-deg: Side
180-deg: Room
ML5609930-592SC
Test Number P92939
Light Module 900 Series, 90CRI
Trim 5” Aperture, Specular Clear Trim
Lumens 728.6
Efficacy 55.6 Lm/W
SC 1.08
ZONAL LUMEN SUMMARY
Zone Lumens %Fixture
0-30 377.31 51.80
0-40 563.12 7 7.3 0
0-60 720.72 98.90
0-90 728.61 100.0
90-180 00.0
0-180 728.61 100.0
CONE OF LIGHT
DFC L W
5.5 17. 2 5.8 9
710.6 7.4 7.4
88.1 8.6 8.6
96.4 9.6 9.6
10 5.2 10.6 10.6
12 3.6 12.8 12.8
0º D
CANDLEPOWER DISTRIBUTION
Downlight
15º0º
180
360
540
30º
45º
60º
75º
90º
ML5609930-594WB
Test Number P93067
Light Module 900 Series, 90CRI
Trim 5” Aperture, Directional Eyeball
Lumens 815.5
Efficacy 62.2 Lm/W
SC 1.21
CANDLEPOWER DISTRIBUTION
Eyeball at 0-degrees
15º0º
110
220
330
30º
45º
60º
75º
90º
30º
HORIZONTAL
PLANE
30º D
CB
DFC L W CB
5.5
9.1
6.5 6.6
3.2
7
5.6
8.3 8.4
4
8
4.3
9.6 9.8
4.6
9
3.4
10.7 11
5.2
10
2.7 11.9 12.2 5.8
12
1.9
14.3 14.6
6.9
30º
VERTICAL
PLANE
30º
D
CB
DFC L W CB
5.5
5.8
6.2 7.2
9.5
7
3.6
7.9 9.2
12.1
8
2.8
9.0 10.4
13.9
9
2.2
10.0 11.8
15.6
10
1.8 11.1 13.2 17. 3
12
1.2
13.5 15.8
20.8
ZONAL LUMEN SUMMARY
Zone Lumens %Fixture
0-30 238.24 29.20
0-40 384.33 47.10
0-60 656.45 80.50
0-90 815.46 100.0
90-180 00.0
0-180 815.46 100.0
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
CustomerFirstCenter1121Highway74SouthPeachtreeCity,GA30269770.486.4800FAX770486.4801
CooperLighting5925McLaughlinRd.Mississauga,Ontario,CanadaL5R1B8905.507.4000FAX905.568.7049
www.cooperlighting.com
PHOTOMETRY
ML56 LED System
900 Series / 90 CRI
SINGLE UNIT FOOTCANDLES
2.5' FROM WALL
(Distance From Fixture Along Wall)
DD 1' 2' 3' 4' 5' 6'
1' 2.2 1.4 0.5 0.2 0.1 0 0
2' 9.7 7.1 3.1 10.3 0.1 0
3' 10.3 8.5 52.2 0.8 0.3 0.1
4' 7.7 6.7 4.7 2.7 1.3 0.6 0.3
5' 5.4 4.9 3.7 2.5 1.5 0.8 0.4
6' 3.9 3.6 2.8 21.4 0.9 0.5
7' 2.9 2.6 2.2 1.6 1.2 0.8 0.5
8' 2.2 21.7 1.3 10.7 0.5
9' 1.7 1.6 1.3 1.1 0.8 0.6 0.5
10' 1.3 1.2 1.1 0.9 0.7 0.5 0.4
MULTIPLE UNIT FOOTCANDLES
2.5' FROM WALL
(Distance From Fixture Along Wall)
DD --3'-- --4'--
1' 2.3 1.8 2.3 2.2 12.2
2' 10.7 9.8 10.7 9.9 6.1 9.9
3' 12.5 13.6 12.5 11.2 10 11.2
4' 10.4 11.4 10.4 99.3 9
5' 7.9 8.6 7.9 6.9 7.4 6.9
6' 5.9 6.5 5.9 5.2 5.6 5.2
7' 4.5 4.9 4.5 44.3 4
8' 3.5 3.7 3.5 3.2 3.4 3.2
9' 2.7 32.7 2.5 2.7 2.5
10' 2.2 2.3 2.2 22.2 2
ML5609930-695WW
Test Number P93339
Light Module 900 Series, 90CRI
Trim
6” Aperture, Wall Wash with
Specular Clear Trim and Specular
Clear Kick Reflector
Lumens 735.6
Efficacy 56.2 Lm/W
SC 0.74
ZONAL LUMEN SUMMARY
Zone Lumens %Fixture
0-30 384.13 52.20
0-40 54 3.16 73.80
0-60 717.57 97.5 0
0-90 735.60 100.0
90-180 00.0
0-180 735.60 100.0
MULTIPLIER TABLE
CCT Option 2700K 3000K 3500K 4000K
CCT Multiplier 0.96 1.00 1.03 1.09
Table based upon testing with 3000K color temperature, 90CRI.
Multipliers may be used to determine relative lumen values with other color temperatures.
CANDLEPOWER DISTRIBUTION
Wall Wash Downlight
15º0º
250
500
750
30º
45º
60º
75º
90º
Photometric tests are per IES measurement standards. Tests represent typical fixture performance.
Field results may vary.
Legend
0-deg: Wall
90-deg: Side
180-deg: Room
ML5609930-692SC
Test Number P93163
Light Module 900 Series, 90CRI
Trim 6” Aperture, Specular Clear Trim
Lumens 751.8
Efficacy 57.4 L m/ W
SC 0.67
ZONAL LUMEN SUMMARY
Zone Lumens %Fixture
0-30 414.09 55.10
0-40 570.99 76.00
0-60 742.15 98.70
0-90 751.80 100.0
90-180 00.0
0-180 751.80 100.0
CONE OF LIGHT
DFC L W
5.5 28.8 3.6 8.8
717. 8 4.6 4.6
813.6 5.2 5.2
910.8 6 6
10 8.7 6.6 6.6
12 6.1 8 8
0º D
CANDLEPOWER DISTRIBUTION
Downlight
15º0º
300
600
900
30º
45º
60º
75º
90º
ML5609930-694WB
Test Number P93307
Light Module 900 Series, 90CRI
Trim 6” Aperture, Directional Eyeball
Lumens 806.6
Efficacy 61.6 Lm/ W
SC 1.22
CANDLEPOWER DISTRIBUTION
Eyeball at 0-degrees
15º0º
110
220
330
30º
45º
60º
75º
90º
30º
HORIZONTAL
PLANE
30º D
CB
DFC L W CB
5.5
8.9
6.6 6.6
3.2
7
5.5
8.3 8.6
4
8
4.2
9.6 9.8
4.6
9
3.3
10.8 11
5.2
10
2.7 12 12.2 5.8
12
1.9
14.4 14.6
6.9
30º
VERTICAL
PLANE
30º
D
CB
DFC L W CB
5.5'
5.8
6.1 7.2
9.5
7'
3.6
7.7 9.2
12.1
8'
2.7
9.0 10.6
13.9
9'
2.2
10.1 11.8
15.6
10'
1.7 11.2 13.2 17.3
12'
1.2
13.4 15.8
20.8
ZONAL LUMEN SUMMARY
Zone Lumens %Fixture
0-30 234.77 29.10
0-40 379.17 47.00
0-60 64 8.12 80.30
0-90 806.64 100.0
90-180 00.0
0-180 806.64 100.0

Navigation menu