1000398619 Catalog

1000367029-Catalog 1000367029-Catalog 1000367029-Catalog B5 unilog cesco-content

1000367173-Catalog 1000367173-Catalog 1000367173-Catalog B5 unilog cesco-content

2016-10-06

: Pdf 1000398619-Catalog 1000398619-Catalog B5 unilog

Open the PDF directly: View PDF .
Page Count: 156 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Front Cover
New Products for 2014
Table of Contents
Bonded Abrasive Systems
Right Angle Systems
Roloc Systems
Random Orbital Systems
Abrasive Belt Systems
Abrasive Wheel Systems
Inline Sanding Systems
Hand Finishing
Specialty Abrasives
Superabrasives
Adhesives and Tapes
Safety Products
Maintenance and Repair
Back Cover

3M™ Industrial Products

for Metalworking

Please Recycle. Printed in U.S.A.

61-5002-8280-3

2014 Edition

3M Abrasive Systems Division

3M Center, Building 223-6S-03

St. Paul, MN 55144-1000

1-866-279-1235

www.3M.com/abrasives

Prices subject to change without notice.

Important Notice to Purchaser

Safety Information: Always read and follow all safety information included with the product. Do not exceed maximum

operating RPM’s. Use guards provided with machine. Follow safety operation procedures posted in work areas.

Product Use: All statements, technical information and recommendations contained in this document are based upon tests

or experience that 3M believes are reliable. However, many factors beyond 3M’s control can effect the use and performance

of a 3M product in a particular application, including the conditions under which the product is used and the time and

environments conditions in which the product is expected to perform. Since these factors are uniquely within the user’s

knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular

purpose and suitable for the user’s method of application.

Warranty and Limited Remedy: Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging

for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the

product. Individual products may have additional or different warranties as stated on product literature, package inserts or

product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED

WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining

whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within

the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be at 3M’s option, to replace the product

or refund the purchase price.

Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from

the 3M product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including

warranty, contract, negligence, or strict liability.

3M, BX, Cool Flow, Classic, Cubitron, E-A-R, E-A-Rsoft, EARflex,

Elavation, EPX, Green Corps, Hookit, Lexa, Light Vision, Neons,

One Touch, Optime, Peltor, Pistonz, Push-Ins, ReLoad, Roloc,

SafeAbsorb, SafeLight, Safety-Walk, Scotch, Scotch-Brite,

Scotch-Seal, Scotch-Weld, Scotchblok, Scotchpar, Scotchpro,

Speedglas, Stikit, Super 77, Tartan, Thor, Trizact, UltraFit, VHB,

Virtua, Wetordry and Yellow Neon are all trademarks of 3M.

THREE EASY WAYS TO CONTACT US FOR ALL 3M INDUSTRIAL PRODUCTS:

3M can provide additional products and accessories to meet your needs. Please contact us

in any of the following ways that you prefer:

Contact your local 3M authorized distributor directly. For information on a 3M distributor

or sales representative in your area, contact us at the numbers below:

For the contiguous 48 United States:

Call .............. 1-866-279-1288

Fax .............. 1-877-369-2923

E-mail us at 3MIndustrial@mmm.com

For additional 3M product information call 1-800-3M Helps or visit us at www.3M.com

Solutions

Metalworking

Engineered

Commitment to Innovation and Quality.

Complete solutions.

Complete solutions. It’s what you’ve come to expect from 3M, the leading

supplier for metalworking industries. For over 100 years, 3M has been a proven

leader, providing advanced technology and innovative solutions for increased

productivity, enhanced efficiency and improved manufacturing processes.

This commitment to innovation continues with ongoing new product

introductions focused on the complete metalworking experience. Today,

3M Metalworking Products encompass a broad spectrum of solution-specific

products from personal safety to abrasives and high-strength adhesives.

3M presents a growing portfolio with each addition to this line of advanced

solutions designed for all metalworking processes from start to finish.

3M™ Cubitron™ II Abrasives. The unmatched cutting power and long life of

3M™ Cubitron™ II Abrasives, made with the revolutionary 3M precision-shaped

grain, has been making metalworking history since 2009. Since then, we’ve

continued to expand the Cubitron II product line with more products and more

grades. New additions to the 2014 Metalworking catalog:

• 3M™ Cubitron™ II Bonded Abrasives —

Depressed Center Grinding Wheels provide superfast cut, are long

lasting and require less pressure for heavy weld removal and other

grinding applications; Cut-off Wheels have high cut rates to help improve

your productivity; Cut & Grind Wheels are designed for use as both a

grinding wheel and a cut-off wheel; ideal for cutting, grinding, gouging,

notching and more!

• 3M™ Cubitron™ II Flap Discs 967A — The power of 3M

precision-shaped grain now available in a flap disc construction

for one step grinding and finishing.

• 3M™ Cubitron™ II Belts — Expanding line now includes the

994F Belt for high pressure automated grinding on carbon steel

and aluminum; 997F Belt for high pressure automated applications

on stainless, cobalt chrome, and nickel alloy; 947A Belt is flexible for

low-medium pressure off-hand applications on stainless, mild steel

and aluminum.

Scotch-Brite™ Products. Make tough jobs easier! New additions to

this family of abrasives include Scotch-Brite Random Orbital (RO)

Discs for prepping bare metal for paint faster and more consistently

with comfort and control; Scotch-Brite 7447/7448 PRO with new fiber

coating technology that provides a fast cut and consistent finish, helps

reduce the time it takes to scuff, prep, or finish parts prior to paint,

and is available in hand pads, discs, jitterbug sheet pads, and rolls;

Scotch-Brite Rapid Cut Wheels get more bite with the cutting power

of 3M precision-shaped grain for fast, easy weld blending and deburring.

3M™ Power Tools. Optimize your abrasive performance with

a complete system that will help you get the job done right.

New additions to our line-up include:

• 3M™ Elite Non-Vacuum Random Orbital Sander — 28708

• 3M™ Random Orbital Sander – 2-Hand — 28335

• 3M™ Sander/Buffer — 28773

• 3M™ Pistol Grip Random Orbital Disc Sander — 27353

• 3M™ Cut-off Wheel Tool (upgraded, replaces model 20234) — 28771

• 3M™ Match and Finish Sander — 28659

• 3M™ Die Grinder, 1 HP — 28770

3M™ Scotch-Weld™ Acrylic Adhesives (DP8810NS, DP8805NS,

DP8405NS). These Next Generation Structural Acrylic Adhesives bond

faster and deliver higher impact resistance than conventional Acrylic

Adhesives. With reduced odor and non-flammable formulations, these

products offer an 18 month shelf life and do not require refrigeration,

helping you to build better products and improve productivity.

3M™ Speedglas™ 100 Series Helmets. This popular series of

welding helmets provides safety and excellent optical clarity — in

style. Check out the new Boneyard, Xterminator, and Tribute models!

3M™ Peltor™ X-Series Earmuffs. Designed for protection against

moderate-to-high level industrial noise. Lightweight lower profile

earmuffs for increased compatibility with other personal protective

equipment. Newly designed spacer, foam liners and ear cushions

help improve attenuation.

New for 2014

Right Angle Disc Systems ..................7

3M™ Fibre Discs ..............................7–10

3M™ Flap Discs ..............................11–14

Scotch-Brite™ Discs. . . . . . . . . . . . . . . . . . . . . . . . . . .15 –18

Hook-and-Loop Discs ....................... 16 –17

Center Hole Discs ..............................17

TN Quick Change Discs .........................18

Surface Conditioning Disc Packs ...................18

3M™ Power Tools ............................18–19

Accessories .................................19–20

Roloc™ Systems. . . . . . . . . . . . . . . . . . . . . . . . . . .21

3M™ Cubitron™ II Roloc™ Discs ................. 22–23

3M™ Roloc™ Discs .......................... 24 –26

Scotch-Brite™ Roloc™ Discs .....................27–29

Roloc™ D/F Discs ...............................30

3M™ Roloc™ Disc Packs ..........................31

3M™ Power Tools ...............................32

Accessories .................................33–34

Random Orbital Systems ..................35

Scotch-Brite™ Discs — Hook-and-Loop ...............35

Scotch-Brite™ Pads ..............................36

3M™ Stikit™ Discs ............................36 –39

3M™ PSA Discs .................................40

3M™ Power Tools ............................41–43

Accessories ....................................44

Abrasive Belt Systems ....................45

3M™ Cubitron™ II Belts .................45– 46, 48–49

3M™ Trizact™ Abrasive Belts ................ 47, 50– 55

3M™ Belts ...........................45– 46, 56–62

Scotch-Brite™ Surface Conditioning Belts .......... 63–65

3M™ Power Tools ...............................66

Accessories ................................ 66–68

Portable Abrasive & Stationary Wheels ... 69

Scotch-Brite™ Convolute Wheels .................69–73

Scotch-Brite™ Unitized Wheels ...................73–75

3M™ Flap Wheels ............................76–77

3M™ Power Tools ...............................78

Accessories .................................79– 80

Inline Sanding Systems .................. 81

Weld Leveling Guide .............................81

Belts and Brushes ...............................82

3M™ Power Tools ...............................83

Accessories ....................................84

Hand Finishing ........................... 85

3M™ Abrasive Sheets .........................85–87

Scotch-Brite™ Hand Pads ......................88–90

Scotch-Brite™ Rolls ..............................91

Accessories ....................................92

Specialty Abrasives ...................... 93

3M™ Cartridge Rolls .............................93

3M™ Square and Cross Pads .......................94

3M™ Bands ....................................95

Scotch-Brite™ Specialty Abrasives ............... 96–97

3M™ Power Tools ...............................98

Accessories ............................... 99 –100

Superabrasives ......................... 101

3M™ Wheels ..............................102–108

3M™ Truing and Dressing Products .............109–110

Adhesives and Tapes .................... 111

Structural and Non-Structural Adhesives ......... 111–118

Anaerobic Adhesives ....................... 119–120

3M™ Temporary Surface Protection Tapes ....... 120–121

3M™ VHB™ Tapes ..............................122

Masking Products ......................... 123 –125

Filament Tapes and Dispensers ............... 126–128

Specialty Tapes ........................... 128–129

Box Sealing Tapes and Dispensers ............. 130–132

Duct Tapes ...................................132

Safety Products ......................... 133

Respirators and Filters .......................133–136

3M™ Speedglas™ Welding Helmets .............137–138

Hearing Conservation ........................139–141

Protective Eyewear .............................142

Sorbents .....................................143

Fall Protection .............................144–145

146

SAFETY WARNINGS

Maintenance and Repair ................ 147

3M™ Maintenance Aerosols .......................147

3M™ Electrical Products. . . . . . . . . . . . . . . . . . . . . . . . . . 147

3M™ Facility Care Products .......................148

3M™ Depressed Center Grinding Wheels ............ 1–2

3M™ Cut and Grind Wheels .........................3

3M™ Cut-Off Wheels ...........................4–5

3M™ Power Tools ................................6

Accessories .....................................6

Bonded Abrasives Systems .................1

Bonded Abrasives Systems

Bonded

Abrasives

Systems

3M™ Bonded Wheels Selection Guide

Bonded Wheel Mineral Type Performance

3M™ Cubitron™ II Precision Shaped Ceramic T27 Premium

3M™ High Performance Ceramic Abrasive Grain T27 Best

3M™ Green Corps™Ceramic Abrasive Grain T27 and T28 Better

3M™ General Purpose Aluminum Oxide T27 Good

3M™ Bonded Wheels

Designed for your toughest grinding and cutting applications, 3M™ Grinding and Cut-Off Wheels are fast cutting and long

lasting. Run with 3M™ Grinders or 3M™ Cut-Off Wheel Tools for optimal performance. For use on all metals. DO NOT USE

ON TOOLS WITHOUT GUARDS.

Type 27

Type 28

3M™ Cubitron™ II Depressed

Center Grinding Wheel Type 27

• 3M precision-shaped grain

for ultra fast cut and long life

• Cuts with less pressure

• Specially formulated for use on stainless and mild steel

• Cool cutting

• Available with quick change attachment

• DO NOT USE ON TOOLS WITHOUT GUARDS

UPC Dia. x Thk. x AH Max. RPM Qty./Case

051115-66598-1 4" x 1/4" x 3/8" 15,300 10/20

051115-66597-4 4" x 1/4" x 5/8" 15,300 10/20

051115-66587-5 4-1/2" x 1/4" x 7/8" 13,300 10/20

051115-66588-2 5" x 1/4" x 7/8" 12,250 10/20

051115-66589-9 6" x 1/4" x 7/8" 10,200 10/20

051115-66590-5 7" x 1/4" x 7/8" 8,500 10/20

051115-66591-2 9" x 1/4" x 7/8" 6,650 10/20

Quick Change

051115-66596-7 4-1/2" x 1/4" x 5/8–11 13,300 10/20

051115-66592-9 5" x 1/4" x 5/8–11 12,250 10/20

051115-66593-6 6" x 1/4" x 5/8–11 10,200 10/20

051115-66594-3 7" x 1/4" x 5/8–11 8,500 10/20

051115-66595-0 9" x 1/4" x 5/8–11 6,650 10/20

3M™ High Performance Depressed

Center Grinding Wheel Type 27

• A blend of conventional and

precision-shaped grain provides

fast cut and long life

• Cuts with less pressure

• Specially formulated for use on stainless and mild steel

• Available with quick change attachment

• DO NOT USE ON TOOLS WITHOUT GUARDS

UPC Dia. x Thk. x AH Max. RPM Qty./Case

051115-66555-4 4" x 1/4" x 3/8" 15,300 10/20

051115-66554-7 4" x 1/4" x 5/8" 15,300 10/20

051115-66544-8 4-1/2" x 1/4" x 7/8" 13,300 10/20

051115-66545-5 5" x 1/4" x 7/8" 12,250 10/20

051115-66546-2 6" x 1/4" x 7/8" 10,200 10/20

051115-66547-9 7" x 1/4" x 7/8" 8,500 10/20

051115-66548-6 9" x 1/4" x 7/8" 6,650 10/20

Quick Change

051115-66553-0 4-1/2" x 1/4" x 5/8–11 13,300 10/20

051115-66549-3 5" x 1/4" x 5/8–11 12,250 10/20

051115-66550-9 6" x 1/4" x 5/8–11 10,200 10/20

051115-66551-6 7" x 1/4" x 5/8–11 8,500 10/20

051115-66552-3 9" x 1/4" x 5/8–11 6,650 10/20

3M™ Depressed Center Grinding Wheels

For safe applications using cut-off wheels, refer to ANSI B-7.1 for details. ALWAYS use appropriate wheel guards. Refer to ANSI B-186.1 for guarding requirements.

3M™ General Purpose Type 27 Wheel

• Aluminum oxide mineral

• Durable wheel provides exceptionally

long life at a value price

• Excellent, economical choice for

general purpose grinding on steel

• DO NOT USE ON TOOLS WITHOUT GUARDS

UPC Dia. x Thk. x AH Grade Max. RPM Qty./Case

051135-92312-2 4-1/2" x 1/4" x 7/8" 24 13,300 40

051135-92314-6 4-1/2" x 1/4" x 5/8–11 INT 24 13,300 40

051135-92313-9 7" x 1/4" x 7/8" 24 8,500 20

051135-92315-3 7" x 1/4" x 5/8–11 INT 24 8,500 20

3M™ Green Corps™ Type 27

Flexible Grinding Wheel

• 3M ceramic abrasive grain

• Can be used on a wide variety of metals

• Smooth running wheels produce less

noise and vibration when grinding

• DO NOT USE ON TOOLS WITHOUT GUARDS

UPC Dia. x Thk. x AH Grade Max. RPM Qty./Case

051111-50440-6 4-1/2" x 1/8" x 7/8" 36 13,300 20/40

051111-50442-0 4-1/2" x 1/8" x 7/8" 46 13,300 20/40

051111-50443-7 4-1/2" x 1/8" x 7/8" 60 13,300 20/40

051111-50444-4 4-1/2" x 1/8" x 7/8" 80 13,300 20/40

051111-50445-1 7" x 1/8" x 7/8" 36 8,500 20/20

051111-50446-8 7" x 1/8" x 7/8" 46 8,500 20/20

051111-50447-5 7" x 1/8" x 7/8" 60 8,500 20/20

3M™ Green Corps™ Type 27

Depressed Center Wheel

• 3M ceramic abrasive grain

• Provides fast cut and long life

• Use with right angle grinders with a guard

• DO NOT USE ON TOOLS WITHOUT GUARDS

UPC Dia. x Thk. x AH Grade Max. RPM Qty./Case

051111-61010-7 4" x 1/4" x 3/8" 24 15,000 60

051111-55991-8 4-1/2" x 1/4" x 7/8" 24 13,300 40

051111-55992-5 4-1/2" x 1/4" x 7/8" 36 13,300 40

051111-55960-4 4-1/2" x 1/4" x 5/8–11 INT 24 13,300 40

051111-55961-1 4-1/2" x 1/4" x 5/8–11 INT 36 13,300 40

051111-55989-5 7" x 1/4" x 7/8" 24 8,500 20

051111-55990-1 7" x 1/4" x 7/8" 36 8,500 20

051111-55958-1 7" x 1/4" x 5/8–11 INT 24 8,500 20

051111-55959-8 7" x 1/4" x 5/8–11 INT 36 8,500 20

051111-55987-1 9" x 1/4" x 7/8" 24 6,600 20

051111-55956-7 9" x 1/4" x 5/8–11 INT 24 6,600 20

3M™ Green Corps™ Type 27

Cutting and Grinding Wheel

• 3M ceramic abrasive grain

• Safe to grind outer face and cut

with edge of same wheel

• DO NOT USE ON TOOLS WITHOUT GUARDS

UPC Dia. x Thk. x AH Grade Max. RPM Qty./Case

051135-92316-0 4-1/2" x 1/8" x 7/8" 36 13,300 40

051135-92318-4 4-1/2" x 1/8" x 5/8–11 INT 36 13,300 40

051135-92317-7 7" x 1/8" x 7/8" 36 8,500 20

051135-92319-1 7" x 1/8" x 5/8–11 INT 36 8,500 20

3M™ Green Corps™ T-28

Depressed Center Wheel

• Made with 3M ceramic abrasive

grain for fast cut rates and long life

• T28 shape works well when grinding

at lower tool angles (15–25 degrees)

• Great for weld removal, grinding in tight

areas and other MRO applications

• DO NOT USE ON TOOLS WITHOUT GUARDS

UPC Dia. x Thk. x AH Grade Max. RPM Qty./Case

051141-28327-2 7" x 1/4" x 5/8 INT 24 8,500 10

Bonded Abrasives Systems

3M™ Depressed Center Grinding Wheels

For safe applications using cut-off wheels, refer to ANSI B-7.1 for details. ALWAYS use appropriate wheel guards. Refer to ANSI B-186.1 for guarding requirements.

Bonded Abrasives Systems

3M™ Cubitron™ II Type 27

Cut & Grind Wheel

• 3M precision-shaped grain

for super fast cut and long life

• Versatile — can be used as both a

grinding wheel and a cut-off wheel

• Optimized for use on mild steel and stainless steel —

for cutting, gouging, beveling, notching and fillet weld removal

• Available with quick change attachment

• DO NOT USE ON TOOLS WITHOUT GUARDS

UPC Dia. x Thk. x AH Max. RPM Qty./Case

046719-82276-8 4" x 1/8" x 3/8" 15,300 10/20

046719-82277-5 4" x 1/8" x 5/8" 15,300 10/20

046719-82278-2 5" x 1/8" x 7/8" 12,250 10/20

046719-82279-9 4-1/2" x 1/8" x 7/8" 13,300 10/20

051141-28758-4 6" x 1/8" x 7/8" 10,200 10/20

051141-28760-7 7" x 1/8" x 7/8" 8,500 10/20

051141-28761-4 9" x 1/8" x 7/8" 6,650 10/20

Quick Change

051141-28762-1 4-1/2" x 1/8" x 5/8–11 13,300 10/20

051141-28763-8 5" x 1/8" x 5/8–11 12,250 10/20

051141-28764-5 6" x 1/8" x 5/8–11 10,200 10/20

051141-28765-2 7" x 1/8" x 5/8–11 8,500 10/20

051141-28766-9 9" x 1/8" x 5/8–11 6,650 10/20

3M™ Cut and Grind Wheels

3M™ Cubitron™ II Cut & Grind Wheels

If you’re looking for a simple, effective way to boost shop productivity, new 3M™ Cubitron™ II Cut & Grind Wheels are the answer!

These versatile bonded wheels are designed to be used both like a depressed center grinding wheel and as a cut-off wheel —

making them ideal for cutting, grinding, gouging and more. DO NOT USE ON TOOLS WITHOUT GUARDS.

Optimized for use on mild steel and stainless steel, in applications including:

• Cutting • Gouging • Beveling

• Notching • Fillet weld removal Type 27

3M™ Cut-Off Wheels Selection Guide

Product Mineral Type Performance

3M™ Cubitron™ II Precision Shaped Ceramic

T1 Premium

T27 Premium

3M™ High Performance Ceramic Abrasive Grain

T1 Best

T27 Best

3M™ Green Corps™Ceramic Abrasive Grain T1 Better

3M™ General Purpose Aluminum Oxide T1 Good

For safe applications using cut-off wheels, refer to ANSI B-7.1 for details. ALWAYS use appropriate wheel guards. Refer to ANSI B-186.1 for guarding requirements.

3M™ Cut-Off Wheels

Durable and fast-cutting wheels for your toughest cutting applications. Run with

3M™ Cut-Off Wheel Tools for optimal performance. For use on all metals.

Type 27

Type 1

3M™ Cubitron™ II

Cut-Off Wheel Type 27

• Premium performance

• 3M precision-shaped grain for ultra-fast

cool cutting action and long life

• Cuts with less pressure

• Specially formulated for use on stainless and mild steel

• Available with quick change attachment

UPC Dia. x Thk. x AH Max. RPM Qty./Case

051115-66529-5 4" x .045" x 5/8" 15,300 25/50

051115-66531-8 4-1/2" x .045" x 7/8" 13,300 25/50

051115-66533-2 4-1/2" x .09" x 7/8" 13,300 25/50

051115-66535-6 4-1/2" x .125" x 7/8" 13,300 25/50

051115-66537-0 5" x .045" x 7/8" 12,250 25/50

051115-66539-4 5" x .09" x 7/8" 12,250 25/50

051115-66541-7 6" x .045" x 7/8" 10,200 25/50

051115-66543-1 7" x .09" x 7/8" 8,500 25/50

Quick Change

051115-66530-1 4-1/2" x .045" x 5/8–11 13,300 25/50

051115-66532-5 4-1/2" x .09" x 5/8–11 13,300 25/50

051115-66534-9 4-1/2" x .125" x 5/8–11 13,300 25/50

051115-66536-3 5" x .045" x 5/8–11 12,250 25/50

051115-66538-7 5" x .09" x 5/8–11 12,250 25/50

051115-66540-0 6" x .045" x 5/8–11 10,200 25/50

051115-66542-4 7" x .09" x 5/8–11 8,500 25/50

3M™ Cubitron™ II

Cut-Off Wheel Type 1

• Premium performance

• 3M precision-shaped grain for ultra-fast

cool cutting action and long life

• Cuts with less pressure

• Cool cutting

• Specially formulated for use on stainless and mild steel

UPC Dia. x Thk. x AH Max. RPM Qty./Case

051115-66513-4 3" x .035" x 1/4" 25,465 25/50

051115-66514-1 3" x .035" x 3/8" 25,465 25/50

051115-66515-8 3" x .06" x 1/4" 25,465 25/50

051115-66516-5 3" x .06" x 3/8" 25,465 25/50

051115-66517-2 4" x .035" x 1/4" 19,100 25/50

051115-66518-9 4" x .035" x 3/8" 19,100 25/50

051115-66519-6 4" x .035" x 5/8" 15,300 25/50

051115-66520-2 4" x .06" x 3/8" 19,100 25/50

051115-66521-9 4" x .09" x 5/8" 15,300 25/50

051115-66522-6 4" x .045" x 5/8" 15,300 25/50

051115-66523-3 4" x .06" x 5/8" 15,300 25/50

051115-66524-0 4" x .125" x 3/8" 19,100 25/50

051115-66525-7 4-1/2" x .045" x 7/8" 13,300 25/50

051115-66526-4 5" x .045" x 7/8" 12,250 25/50

051115-66527-1 6" x .045" x 7/8" 10,200 25/50

051115-66528-8 7" x .045" x 7/8" 8,500 25/50

Bonded Abrasives Systems

3M™ Cut-Off Wheels

For safe applications using cut-off wheels, refer to ANSI B-7.1 for details. ALWAYS use appropriate wheel guards. Refer to ANSI B-186.1 for guarding requirements.

3M™ High Performance

Cut-Off Wheel Type 1

• A blend of 3M precision-shaped

ceramic grain and conventional abrasive

grain provides fast cut and long life

• Specially formulated for use

on stainless and mild steel

UPC Dia. x Thk. x AH Max. RPM Qty./Case

051115-66556-1 3" x .035" x 1/4" 25,465 25/50

051115-66557-8 3" x .035" x 3/8" 25,465 25/50

051115-66558-5 3" x .06" x 1/4" 25,465 25/50

051115-66559-2 3" x .06" x 3/8" 25,465 25/50

051115-66560-8 4" x .035" x 1/4" 19,100 25/50

051115-66561-5 4" x .035" x 3/8" 19,100 25/50

051115-66562-2 4" x .035" x 5/8" 15,300 25/50

051115-66563-9 4" x .06" x 3/8" 19,100 25/50

051115-66564-6 4" x .09" x 5/8" 15,300 25/50

051115-66565-3 4" x .045" x 5/8" 15,300 25/50

051115-66566-0 4" x .06" x 5/8" 15,300 25/50

051115-66567-7 4" x .125" x 3/8" 19,100 25/50

051115-66568-4 4-1/2" x .045" x 7/8" 13,300 25/50

051115-66569-1 5" x .045" x 7/8" 12,250 25/50

051115-66570-7 6" x .045" x 7/8" 10,200 25/50

051115-66571-4 7" x .045" x 7/8" 8,500 25/50

3M™ High Performance

Cut-Off Wheel Type 27

• A blend of 3M precision-shaped

ceramic grain and conventional abrasive

grain provides fast cut and long life

• Specially formulated for use

on stainless and mild steel

UPC Dia. x Thk. x AH Max. RPM Qty./Case

051115-66572-1 4" x .045" x 5/8" 15,300 25/50

051115-66574-5 4-1/2" x .045" x 7/8" 13,300 25/50

051115-66576-9 4-1/2" x .09" x 7/8" 13,300 25/50

051115-66578-3 4-1/2" x .125" x 7/8" 13,300 25/50

051115-66580-6 5" x .045" x 7/8" 12,250 25/50

051115-66582-0 5" x .09" x 7/8" 12,250 25/50

051115-66584-4 6" x .045" x 7/8" 10,200 25/50

051115-66586-8 7" x .09" x 7/8" 8,500 25/50

Quick Change

051115-66573-8 4-1/2" x .045" x 5/8–11 13,300 25/50

051115-66575-2 4-1/2" x .09" x 5/8–11 13,300 25/50

051115-66577-6 4-1/2" x .125" x 5/8–11 13,300 25/50

051115-66579-0 5" x .045" x 5/8–11 12,250 25/50

051115-66581-3 5" x .09" x 5/8–11 12,250 25/50

051115-66583-7 6" x .045" x 5/8–11 10,200 25/50

051115-66585-1 7" x .09" x 5/8–11 8,500 25/50

3M™ General Purpose Cut-Off Wheels

• Value priced wheel provides

fast cut and long life

• Best on carbon steel

• Must be used with ANSI-approved

flanges for Type 1 cut-off wheels

• DO NOT USE ON TOOLS WITHOUT GUARDS

UPC Dia. x W x AH Max. RPM Min./Case

051141-20447-5 6" x .045" x 7/8" 10,200 50/100

051141-20448-2 4" x 1/32" x 3/8" 21,000 50/100

051141-20449-9 4" x 1/16" x 3/8" 21,000 50/100

3M™ Green Corps™ Cut-Off Wheels

• 3M ceramic abrasive grain

• Provides high cut rates and

long life on various substrates,

including fiberglass, stainless steel

and carbon steel

• Must be used with ANSI-approved flanges for Type 1 cut-off wheels

• DO NOT USE ON TOOLS WITHOUT GUARDS

UPC Dia. x W x AH Max. RPM Min./Case

051144-83487-7 2" x 1/16" x 1/4" 42,000 50/50

051144-82238-6 3" x 1/32" x 1/4" 35,000 50/50

051131-01989-8 3" x 1/32" x 3/8" 35,000 5 wheels/pack

10 packs/case

051131-01985-0 3" x 1/32" x 3/8" 35,000 50/50

051131-01990-4 3" x 1/16" x 3/8" 28,000 5 wheels/pack

10 packs/case

051131-01986-7 3" x 1/16" x 3/8" 28,000 50/50

051144-83488-4 4" x 1/16" x 3/8" 21,000 50/50

051144-88755-2 4" x 1/32" x 1/4" 26,250 50/50

051131-01994-2 4" x 1/32" x 3/8" 26,250 50/50

051141-20275-4 4-1/2" x 3/64" x 7/8" 13,300 50/200

051141-20276-1 4-59/64" x 3/64" x 7/8" 12,200 50/200

Bonded Abrasives Systems

3M™ Cut-Off Wheels

Bonded Abrasives Systems

3M™ Power Tools for Bonded Abrasives

Product Name UPC Size/Description For Use With Qty./Case

Grinding Wheel Adapter Nut

051144-88765-1 5/8–11 Thread

Secures 4-1/2" diameter grinding

wheels to right angle tool with

a 5/8–11 threaded shaft

1 Pair/5 Pairs

Flap Disc Holder

051144-88769-9 4" Diameter; 5/8–11 Thread Holder for 7"– 9" diameter

Type 27 grinding wheels 1

3M™ Green Corps™

Flexible Grinding Disc 051111-51046 3-3/8” Diameter;

7/8" Center Hole; Clear

Holder for 4-1/2" x 7/8" center hole flexible

grinding wheel 5/100

051111-51045 4-5/8” Diameter;

7/8" Center Hole; Clear

Holder for 7" x 7/8" center hole

flexible grinding wheel 5/100

Flange Nut

051141-28739-3 1" x 5/8" x 3/8"; 3/8 –24 INT

4" grinder with 3/8–24 thread;

4" x 1/4" x 5/8" center hole Depressed Center

Grinding Wheels and Unitized Wheels

1 Set

051141-28740-9 1" x /8"; 5/8 –11 INT

4-1/2" grinder with 5/8–11 thread;

4" x 1/4" x 5/8" center hole Depressed Center

Grinding Wheels and Unitized Wheels

1 Set

Accessories for 3M™ Bonded Wheels and Cut-Off Wheels

3M™ Grinders — Type 27

• Powerful and lightweight for more comfortable grinding and improved productivity

• Built for durability and smooth operation

• 3M™ Gripping Material for added comfort and reduced vibration

• Features repositionable guards for better visibility, steel gear heads for added durability

and superior noise reduction

Model No.

Tool Dia.

Inch (mm)

Motor

HP (W) Max RPM

Weight

Pound (kg) Length

Height

Inch (mm)

Air Inlet

Thread

Airflow Rate

SCFM (LPM) Thread Size UPC

28403 4 (100) 1 (744) 12,000 2.66 (1.21) Standard 4.5 (114) 3/8" NPT* 37 (1,048) 3/8"–24 EXT 051141-28403-3

28413 4 (100) 1 (744) 12,000 3.85 (1.75) Extended 4.5 (114) 3/8" NPT* 37 (1,048) 3/8"–24 EXT 051141-28413-2

28405 4-1/2 (114.3) 1 (744) 12,000 2.84 (1.29) Standard 4.7 (119) 3/8" NPT* 37 (1,048) 5/8"–11 EXT 051141-28405-7

28414 4-1/2 (114.3) 1 (744) 12,000 4.03 (1.83) Extended 4.7 (119) 3/8" NPT* 37 (1,048) 5/8"–11 EXT 051141-28414-9

*Includes 3/8” to 1/4” reducer

3M™ Cut-Off Wheel Tools

• Right angle head and repositionable guard for optimal power and visibility

• Extended body style for greater versatility and control

• 3M™ Gripping Material for added comfort and reduced vibration

Model No.

Tool Dia.

Inch (mm)

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm) Air Inlet Thread

Airflow Rate

SCFM (LPM) UPC

28771†4 (100) 1 (744) 19,000 2.25 (1.02) Standard 3 (83) 3/8” NPT 37 (1,048) 051141-28771-3

28407 4 (100) 1 (744) 18,000 2.25 (1.02) Extended 4.26 (108.2) 3/8" NPT* 37 (1,048) 051141-28407-1

† Replaced Model No. 20243

*Includes 3/8" to 1/4” reducer

2840728771

Optional Grinder Guard

• Allows 4" grinder to run larger, thicker 4-1/2" fibre and flap discs

• Both guards (55106 and 28632) fit all 1 HP 3M™ Right Angle Grinders and Disc Sanders

Model No. Size For Use With Tool Required Accessories UPC

55106 4-1/2" 3M™ Grinders — 4" (Model No. 28403; 28413) Accessories with 3/8–24 INT threads 051141-29403-3

28632 5" 3M™ Disc Sanders, 1 HP — 4"– 5" (Model No. 28408) Accessories with 5/8–11 INT threads 051141-28632-7

55106

28405 28414

3M™ Right Angle Disc

Systems — Fibre, Flap

and Scotch-Brite™ Discs

3M™ Fibre Discs

Choose the performance level that fits your needs with a complete offering of 3M™ Fibre Discs. Get great performance at a great

price with the general purpose metalworking 3M™ Fibre Disc 381C. Or, set a new standard for productivity with 3M™ Cubitron™ II

982C Discs. All of 3M’s fibre discs are available in a variety of sizes.

Selection Guide for Stainless Steel or Aluminum

For fast cutting when grinding and blending stainless steel or aluminum.

Product Mineral Type Performance

3M™ Fibre Disc 501C Alumina Zirconia Good

3M™ Fibre Disc 785C Ceramic Aluminum Oxide Blend Better

3M™ Fibre Disc 985C Ceramic Abrasive Grain Better

3M™ Cubitron™ II Fibre Disc 987C Precision Shaped Ceramic Best

Cut Rate

Life

501C

985C

987C

785C

Selection Guide for Carbon Steel

For fast cutting when grinding and blending carbon steel.

Product Mineral Type Performance

3M™ Fibre Disc 381C Aluminum Oxide Good

3M™ Fibre Disc 501C Alumina Zirconia Better

3M™ Fibre Disc 988C Ceramic Abrasive Grain Better

3M™ Cubitron™ II Fibre Disc 982C Precision Shaped Ceramic Best

Cut Rate

Life

381C

988C

982C

501C

Right Angle Disc Systems

3M™ Fibre Discs

3M™ Cubitron™ II

Fibre Disc 982C

• 3M precision shaped

ceramic grain, engineered with

ultra-sharp, fast cutting points

that wear evenly, run cool, and

optimize mineral breakdown

to maximize life

• Best in class for weld prep and

removal on carbon steel applications

UPC Dia. x Ctr. Hole Grade Max. RPM Min./Case

051141-27400-3 4-1/2" x 7/8" 36+ 13,300 25/100

051141-27631-1 4-1/2" x 7/8" 60+ 13,300 25/100

051141-27635-9 4-1/2" x 7/8" 80+ 13,300 25/100

051141-27401-0 5" x 7/8" 36+ 12,000 25/100

051141-27632-8 5" x 7/8" 60+ 12,000 25/100

051141-27636-6 5" x 7/8" 80+ 12,000 25/100

051141-27402-7 7" x 7/8" 36+ 8,600 25/100

051141-27633-5 7" x 7/8" 60+ 8,600 25/100

051141-27637-3 7" x 7/8" 80+ 8,600 25/100

051141-27403-4 9-1/8" x 7/8" 36+ 6,600 25/100

051141-27634-2 9-1/8" x 7/8" 60+ 6,600 25/100

051141-27638-0 9-1/8" x 7/8" 80+ 6,600 25/100

TN Quick Change

051141-27425-6 4-1/2" x 5/8–11* 36+ 13,300 25/100

051141-27639-7 4-1/2" x 5/8–11* 60+ 13,300 25/100

051141-27642-7 4-1/2" x 5/8–11* 80+ 13,300 25/100

051141-27404-1 5" x 5/8–11* 36+ 12,000 25/100

051141-27640-3 5" x 5/8–11* 60+ 12,000 25/100

051141-27643-4 5" x 5/8–11* 80+ 12,000 25/100

051141-27405-8 7" x 5/8–11* 36+ 8,600 25/100

051141-27641-0 7" x 5/8–11* 60+ 8,600 25/100

051141-27644-1 7" x 5/8–11* 80+ 8,600 25/100

GL Quick Change

051141-27406-5 5" x 5/8–11* 36+ 12,000 25/100

051141-27724-0 5" x 5/8–11* 60+ 12,000 25/100

051141-27726-4 5" x 5/8–11* 80+ 12,000 25/100

051141-27407-2 7" x 5/8–11* 36+ 8,600 25/100

051141-27725-7 7" x 5/8–11* 60+ 8,600 25/100

051141-27727-1 7" x 5/8–11* 80+ 8,600 25/100

* Quick Change Tinneman Nut Attachment

Weld Blending Mild Steel for Paint Prep

Step 1 – Fibre Disc 982C Grade 36+

Step 2 – Scotch-Brite™ Light Grinding and Blending Disc SD

on black ribbed pad

Step 3 – Apply 3 mil Paint

Results – Increase productivity

– Reduce abrasive cost

Tech Tip

3M™ Cubitron™ II

Fibre Disc 987C

• 3M precision shaped grain

technology, engineered with

ultra-sharp, fast cutting points

that wear evenly, run cool, and

optimize mineral breakdown to maximize life

• Best in class for weld prep and removal

on heat sensitive alloys such as stainless steel

UPC Dia. x Ctr. Hole Grade Max. RPM Min./Case

051141-27447-8 4-1/2" x 7/8" 36+ 13,300 25/100

051141-27653-3 4-1/2" x 7/8" 60+ 13,300 25/100

051141-27657-1 4-1/2" x 7/8" 80+ 13,300 25/100

051141-27448-5 5" x 7/8" 36+ 12,000 25/100

051141-27654-0 5" x 7/8" 60+ 12,000 25/100

051141-27658-8 5" x 7/8" 80+ 12,000 25/100

051141-27449-2 7" x 7/8" 36+ 8,600 25/100

051141-27655-7 7" x 7/8" 60+ 8,600 25/100

051141-27659-5 7" x 7/8" 80+ 8,600 25/100

051141-27450-8 9-1/8" x 7/8" 36+ 6,600 25/100

051141-27656-4 9-1/8" x 7/8" 60+ 6,600 25/100

051141-27660-1 9-1/8" x 7/8" 80+ 6,600 25/100

TN Quick Change

051141-27469-0 4-1/2" 36+ 13,300 25/100

051141-27661-8 4-1/2" 60+ 13,300 25/100

051141-27664-9 4-1/2" 80+ 13,300 25/100

051141-27467-6 5" 36+ 12,000 25/100

051141-27662-5 5" 60+ 12,000 25/100

051141-27665-6 5" 80+ 12,000 25/100

051141-27468-3 7" 36+ 8,600 25/100

051141-27663-2 7" 60+ 8,600 25/100

051141-27666-3 7" 80+ 8,600 25/100

GL Quick Change

051141-27728-8 5" 36+ 12,000 25/100

051141-27730-1 5" 60+ 12,000 25/100

051141-27732-5 5" 80+ 12,000 25/100

051141-27729-5 7" 36+ 8,600 25/100

051141-27731-8 7" 60+ 8,600 25/100

051141-27733-2 7" 80+ 8,600 25/100

Right Angle Disc Systems

3M™ Fibre Discs 381C

• General purpose disc for weld

removal, grinding and blending

• Resin bond aluminum oxide provides

durability and aggressive stock removal

UPC Dia. x Ctr. Hole Grade Max. RPM Min./Case

051144-77595-8 4-1/2" x 7/8" 24 13,300 25

051144-77596-5 4-1/2" x 7/8" 36 13,300 25

051144-77597-2 4-1/2" x 7/8" 50 13,300 25

051144-77598-9 4-1/2" x 7/8" 60 13,300 25

051144-77599-6 4-1/2" x 7/8" 80 13,300 25

051144-77600-9 4-1/2" x 7/8" 100 13,300 25

051144-77601-6 4-1/2" x 7/8" 120 13,300 25

051144-81369-8 5" x 7/8" 24 12,000 25

051144-81372-8 5" x 7/8" 36 12,000 25

051144-81375-9 5" x 7/8" 50 12,000 25

051144-01727-0 5" x 7/8" 60 12,000 25

051144-20054-2 5" x 7/8" 80 12,000 25

051144-20053-5 5" x 7/8" 100 12,000 25

051144-20052-8 5" x 7/8" 120 12,000 25

051144-01745-4 7" x 7/8" 16 8,600 25

051144-81370-4 7" x 7/8" 24 8,600 25

051144-81373-5 7" x 7/8" 36 8,600 25

051144-81376-6 7" x 7/8" 50 8,600 25

051144-01741-6 7" x 7/8" 60 8,600 25

051144-01740-9 7" x 7/8" 80 8,600 25

051144-01739-3 7" x 7/8" 100 8,600 25

051144-01738-6 7" x 7/8" 120 8,600 25

051144-81371-1 9-1/8" x 7/8" 24 6,600 25/100

051144-81373-5 9-1/8" x 7/8" 36 6,600 25/100

051144-81377-3 9-1/8" x 7/8" 50 6,600 25

051144-01762-1 9-1/8" x 7/8" 80 6,600 25

051144-01761-4†9-1/8" x 7/8" 100 6,600 25

051144-01760-7†9-1/8" x 7/8" 120 6,600 25

† Made-to-Order

3M™ Fibre Discs 501C

• Versatile disc for use on a wide

variety of metals

• Aluminum zirconia provides a good option

for both stainless and mild steel applications

UPC Dia. x Ctr. Hole Grade Max. RPM Min./Case

051111-50409-3 4-1/2" x 7/8" 24 13,300 25/100

051111-50413-0 4-1/2" x 7/8" 36 13,300 25/100

051111-50414-7 4-1/2" x 7/8" 50 13,300 25/100

051111-50415-4 4-1/2" x 7/8" 60 13,300 25/100

051111-50416-1 4-1/2" x 7/8" 80 13,300 25/100

051111-50417-8 4-1/2" x 7/8" 100 13,300 25/100

051111-50419-2 4-1/2" x 7/8" 120 13,300 25/100

051111-50410-9 5" x 7/8" 24 12,000 25/100

051111-50412-3 5" x 7/8" 36 12,000 25/100

051111-50420-8 5" x 7/8" 50 12,000 25/100

051111-50421-5 5" x 7/8" 60 12,000 25/100

051111-50422-2 5" x 7/8" 80 12,000 25/100

051111-50423-9 5" x 7/8" 100 12,000 25/100

051111-50424-6 5" x 7/8" 120 12,000 25/100

051111-50411-6 7" x 7/8 24 8,600 25/100

051111-50426-0 7" x 7/8 36 8,600 25/100

051111-50425-3 7" x 7/8 50 8,600 25/100

051111-50427-7 7" x 7/8 60 8,600 25/100

051111-50428-4 7" x 7/8 80 8,600 25/100

051125-63799-2†7" x 7/8 100 8,600 25/100

051111-50430-7†7" x 7/8 120 8,600 25/100

051111-50432-1†9-1/8" x 7/8" 24 6,600 25/100

051111-50433-8 9-1/8" x 7/8" 36 6,600 25/100

051111-50434-5†9-1/8" x 7/8" 50 6,600 25/100

† Made-to-Order

Right Angle Disc Systems

3M™ Fibre Discs

Use 3M™ Red Ribbed Pads to optimize product life of 900 series fibre

discs — grades 24 and 36.

Tech Tip

3M™ Fibre Discs 985C

• 3M ceramic abrasive grain

• 3M’s better choice for a long-lasting,

premium disc for stainless steel

• Includes a grinding aid for cooler running

UPC Dia. x Ctr. Hole Grade Max. RPM Min./Case

051111-55767-9 5" x 7/8" 36 12,000 25/100

051111-55780-8 5" x 7/8" 50 12,000 25/100

051111-55776-1 5" x 7/8" 60 12,000 25/100

051111-55779-2 5" x 7/8" 80 12,000 25/100

051111-55971-0 7" x 7/8" 24 8,600 25/100

051111-55972-7 7" x 7/8" 36 8,600 25/100

051111-55973-4 7" x 7/8" 50 8,600 25/100

051111-55974-1 7" x 7/8" 60 8,600 25/100

051111-55975-8 7" x 7/8" 80 8,600 25/100

3M™ Fibre Discs 988C

• 3M ceramic abrasive grain

• 3M’s best premium disc for long-lasting

performance for mild steel grinding

UPC Dia. x Ctr. Hole Grade Max. RPM Min./Case

051111-55712-9 4-1/2" x 5/8–11* 36 13,300 25/100

051141-27341-9†5" x 5/8–11* 36 12,000 100

051111-55746-4 5" x 7/8" 24 12,000 25/100

051111-55743-3 5" x 7/8" 36 12,000 25/100

051111-55742-6 5" x 7/8" 50 12,000 25/100

051111-60319-2 5" x 7/8" 60 12,000 25/100

051111-55740-2 5" x 7/8" 80 12,000 25/100

051111-55840-9 7" x 5/8–11* 24 8,600 25/100

051111-55715-0 7" x 5/8–11* 36 8,600 25/100

051111-55964-2 7" x 7/8" 24 8,600 25/100

051111-55965-9 7" x 7/8" 36 8,600 25/100

051111-55966-6 7" x 7/8" 40 8,600 25/100

051111-55967-3 7" x 7/8" 50 8,600 25/100

051111-55739-6 7" x 7/8" 60 8,600 25/100

051111-55968-0 7" x 7/8" 80 8,600 25/100

051111-60314-7 7" x 7/8" 24 8,600 50/100

051111-55744-0 9-1/8" x 7/8" 24 6,600 25/100

051111-55735-8 9-1/8" x 7/8" 36 6,600 25/100

051111-55733-4 9-1/8" x 7/8" 50 6,600 25/100

† Made-to-Order

* Quick Change Tinneman Nut Attachment

3M™ Fibre Discs 785C

• 3M ceramic aluminum oxide

blend abrasive grain

• An excellent starting point for stainless steel

• Includes a grinding aid for cooler running

UPC Dia. x Ctr. Hole Grade Max. RPM Min./Case

051111-60719-0 4-1/2" x 5/8–11* 36 13,300 25

051144-80660-7 4-1/2" x 7/8" 36 13,300 25/100

051144-80661-4 4-1/2" x 7/8" 50 13,300 25/100

051144-80662-1 4-1/2" x 7/8" 60 13,300 25/100

051144-80663-8 4-1/2" x 7/8" 80 13,300 25/100

051144-80665-2 4-1/2" x 7/8" P120 13,300 25/100

051144-13931-6 5" x 7/8" 24 12,000 25/100

051144-13930-9 5" x 7/8" 36 12,000 25/100

051144-13928-6 5" x 7/8" 50 12,000 25/100

051144-13977-4 5" x 7/8" 60 12,000 25/100

051144-13926-2 5" x 7/8" 80 12,000 25/100

051144-80654-6 5" x 7/8" P100 12,000 25/100

051144-80655-3 5" x 7/8" P120 12,000 25/100

051144- 88831-3†7" x 5/8–11* 60 8,600 25/100

051144-13937-8 7" x 7/8" 24 8,600 25/100

051144-13936-1 7" x 7/8" 36 8,600 25/100

051144-13934-7 7" x 7/8" 50 8,600 25/100

051144-13933-0 7" x 7/8" 60 8,600 25/100

051144-13932-3 7" x 7/8" 80 8,600 25/100

051144-80656-0 7" x 7/8" P100 8,600 25/100

051144-80657-7 7" x 7/8" P120 8,600 25/100

051144-13943-9 9-1/8" x 7/8" 24 6,600 25/100

051144-13942-2 9-1/8" x 7/8" 36 6,600 25/100

051144-13940-8 9-1/8" x 7/8" 50 6,600 25/100

051144-13938-5 9-1/8" x 7/8" 80 6,600 25/100

† Made-to-Order

* Quick Change Tinneman Nut Attachment

Right Angle Disc Systems

3M™ Fibre Discs

3M™ Flap Disc Selection Guide

Select Flap Discs for extended life and single-step grinding/blending on all types of metals.

Product Mineral Type Performance

4-1/2" x 7/8" 4-1/2" x 5/8–11 7" x 7/8" 7" x 5/8–11

T27 T29 T27 T29 T27 T29 T27 T29

3M™ Flap Disc 546D Alumina Zirconia Good

3M™ Flap Disc 577F Alumina Zirconia Good

3M™ Flap Disc 566A Alumina Zirconia Good

3M™ Cubitron™ II Flap Disc 967A Precision-Shaped Ceramic Best

3M™ Flap Discs

3M™ Flap Discs offer an unbeatable system for grinding and blending in one easy step. The construction wears away, exposing

fresh mineral to extend disc life and provide consistent cut rates. Great for weld grinding, blending, deburring, rust removal,

surface prep and edge grinding on all types of metals. Available in both T29 or T27 constructions with or without the 5/8–11 hub.

Type 29 Type 27

Right Angle Disc Systems

3M™ Cubitron™ II Flap Discs 967A

• Made with revolutionary 3M

precision-shaped grain technology

• Grinds and blends in a single step

• Flexible to follow curves and contours

• Long-life and consistency at any grinding pressure

UPC Dia. x Ctr. Hole Grade Max. RPM Qty./Case

Type 27

051141-55602-4 4-1/2" x 5/8–11* 40+ 13,300 10

051141-55603-1 4-1/2" x 5/8–11* 60+ 13,300 10

051141-55604-8 4-1/2" x 5/8–11* 80+ 13,300 10

051141-55605-5 4-1/2" x 7/8" 40+ 13,300 10

051141-55606-2 4-1/2" x 7/8" 60+ 13,300 10

051141-55607-9 4-1/2" x 7/8" 80+ 13,300 10

051141-55608-6 7" x 5/8–11* 40+ 8,600 5

051141-55609-3 7" x 5/8–11* 60+ 8,600 5

051141-55610-9 7" x 5/8–11* 80+ 8,600 5

051141-55611-6 7" x 7/8" 40+ 8,600 5

051141-55612-3 7" x 7/8" 60+ 8,600 5

051141-55613-0 7" x 7/8" 80+ 8,600 5

* Quick Change Hub Attachment

3M™ Cubitron™ II Flap Discs 967A (cont.)

UPC Dia. x Ctr. Hole Grade Max. RPM Qty./Case

Type 29

051141-55620-8 4-1/2" x 5/8–11* 40+ 13,300 10

051141-55621-5 4-1/2" x 5/8–11* 60+ 13,300 10

051141-55622-2 4-1/2" x 5/8–11* 80+ 13,300 10

051141-55623-9 4-1/2" x 7/8" 40+ 13,300 10

051141-55624-6 4-1/2" x 7/8" 60+ 13,300 10

051141-55625-3 4-1/2" x 7/8" 80+ 13,300 10

051141-55626-0 7" x 5/8–11* 40+ 8,600 5

051141-55627-7 7" x 5/8–11* 60+ 8,600 5

051141-55628-4 7" x 5/8–11* 80+ 8,600 5

051141-55629-1 7" x 7/8" 40+ 8,600 5

051141-55630-7 7" x 7/8" 60+ 8,600 5

051141-55631-4 7" x 7/8" 80+ 8,600 5

* Quick Change Hub Attachment

3M™ Flap Discs

Performance Under Pressure — Choose the right disc for the job.

Low Pressure: Blending, Light Cleaning

Medium Pressure: Weld Removal, Scale Removal, Oxide Removal, Surface Prep

High Pressure: Beveling, Deburring

566A

967A

577F

546D

Flap discs typically provide a finish one grade finer than they are graded.

Tech Tip

3M™ Flap Discs 546D

• Versatile alumina zirconia

mineral works on a variety

of metals and applications

• Flexible X wt. cotton backing

designed for fast cut on light

duty grinding/finishing applications

UPC Dia. x Ctr. Hole Grade Max. RPM Qty./Case

Type 29

051115-28874-6†4-1/2" x 7/8" 24 13,300 10

051115-28875-3†4-1/2" x 7/8" 36 13,300 10

051115-28876-0 4-1/2" x 7/8" 40 13,300 10

051115-28877-7 4-1/2" x 7/8" 60 13,300 10

051115-28878-4 4-1/2" x 7/8" 80 13,300 10

051115-28879-1†4-1/2" x 7/8" 120 13,300 10

051115-28868-5†4-1/2" x 5/8–11* 24 13,300 10

051115-28869-2†4-1/2" x 5/8–11* 36 13,300 10

051115-28870-8 4-1/2" x 5/8–11* 40 13,300 10

051115-28871-5 4-1/2" x 5/8–11* 60 13,300 10

051115-28872-2 4-1/2" x 5/8–11* 80 13,300 10

051115-28873-9†4-1/2" x 5/8–11* 120 13,300 10

051115-28926-2†7" x 7/8" 24 8,600 5

051115-28927-9†7" x 7/8" 36 8,600 5

051115-28928-6 7" x 7/8" 40 8,600 5

051115-28929-3 7" x 7/8" 60 8,600 5

051115-28930-9 7" x 7/8" 80 8,600 5

051115-28931-6†7" x 7/8" 120 8,600 5

051115-28920-0†7" x 5/8–11* 24 8,600 5

051115-28921-7†7" x 5/8–11* 36 8,600 5

051115-28922-4 7" x 5/8–11* 40 8,600 5

051115-28923-1 7" x 5/8–11* 60 8,600 5

051115-28924-8 7" x 5/8–11* 80 8,600 5

051115-28925-5†7" x 5/8–11* 120 8,600 5

† Made-to-Order

* Quick Change Hub Attachment

3M™ Flap Discs 546D (cont.)

UPC Dia. x Ctr. Hole Grade Max. RPM Qty./Case

Type 27

051141-30598-1†4-1/2" x 7/8" 36 13,300 10

051141-30599-8 4-1/2" x 7/8" 40 13,300 10

051141-30600-1 4-1/2" x 7/8" 60 13,300 10

051141-30601-8 4-1/2" x 7/8" 80 13,300 10

051141-30602-5†4-1/2" x 7/8" 120 13,300 10

051141-30593-6†4-1/2" x 5/8–11* 36 13,300 10

051141-30594-3 4-1/2" x 5/8–11* 40 13,300 10

051141-30595-0 4-1/2" x 5/8–11* 60 13,300 10

051141-30596-7 4-1/2" x 5/8–11* 80 13,300 10

051141-30597-4†4-1/2" x 5/8–11* 120 13,300 10

051141-30603-2†7" x 7/8" 36 8,600 5

051141-30604-9 7" x 7/8" 40 8,600 5

051141-30605-6 7" x 7/8" 60 8,600 5

051141-30606-3 7" x 7/8" 80 8,600 5

051115-28917-0†7" x 7/8" 120 8,600 5

051141-30607-0†7" x 5/8–11* 36 8,600 5

051141-30608-7 7" x 5/8–11* 40 8,600 5

051141-30609-4 7" x 5/8–11* 60 8,600 5

051141-30610-0 7" x 5/8–11* 80 8,600 5

051115-28919-4†7" x 5/8–11* 120 8,600 5

† Made-to-Order

* Quick Change Hub Attachment

Right Angle Disc Systems

3M™ Flap Discs

3M™ Flap Discs 566A

• A versatile flap disc for a great

balance of cut and life on any

metalworking application

• YF wt. cloth backing

• Alumina zirconia works on all metals

UPC Dia. x Ctr. Hole Grade Max. RPM Qty./Case

Type 27

051141-55362-7 4-1/2" x 5/8–11* 40 13,300 10

051141-55363-4 4-1/2" x 5/8–11* 60 13,300 10

051141-55364-1 4-1/2" x 5/8–11* 80 13,300 10

051141-55366-5 4-1/2" x 7/8" 40 13,300 10

051141-55367-2 4-1/2" x 7/8" 60 13,300 10

051141-55368-9 4-1/2" x 7/8" 80 13,300 10

051141-55370-2 7" x 5/8–11* 40 8,600 5

051141-55371-9 7" x 5/8–11* 60 8,600 5

051141-55372-6 7" x 5/8–11* 80 8,600 5

051141-55374-0 7" x 7/8" 40 8,600 5

051141-55375-7 7" x 7/8" 60 8,600 5

051141-55376-4 7" x 7/8" 80 8,600 5

Type 29

051141-55402-0 4-1/2" x 5/8–11* 40 13,300 10

051141-55403-7 4-1/2" x 5/8–11* 60 13,300 10

051141-55404-4 4-1/2" x 5/8–11* 80 13,300 10

051141-55406-8 4-1/2" x 7/8" 40 13,300 10

051141-55407-5 4-1/2" x 7/8" 60 13,300 10

051141-55408-2 4-1/2" x 7/8" 80 13,300 10

051141-55410-5 7" x 5/8–11* 40 8,600 5

051141-55411-2 7" x 5/8–11* 60 8,600 5

051141-55412-9 7" x 5/8–11* 80 8,600 5

051141-55414-3 7" x 7/8" 40 8,600 5

051141-55415-0 7" x 7/8" 60 8,600 5

051141-55416-7 7" x 7/8" 80 8,600 5

*Quick Change Hub Attachment

3M™ Giant Flap Discs 566A

• A versatile flap disc for a great

balance of cut and life on any

metalworking application

• Packed with 25% more abrasive material

than standard 3M™ Flap Discs 566A

• Delivers longer life and fewer disc changes

• Alumina zirconia works on all metals

UPC Dia. x Ctr. Hole Grade Max. RPM Qty./Case

Type 27

051141-55378-8 4-1/2" x 5/8–11* 40 13,300 10

051141-55379-5 4-1/2" x 5/8–11* 60 13,300 10

051141-55380-1 4-1/2" x 5/8–11* 80 13,300 10

051141-55382-5 4-1/2" x 7/8" 40 13,300 10

051141-55383-2 4-1/2" x 7/8" 60 13,300 10

051141-55384-9 4-1/2" x 7/8" 80 13,300 10

051141-55386-3 7" x 5/8–11* 40 8,600 5

051141-55387-0 7" x 5/8–11* 60 8,600 5

051141-55388-7 7" x 5/8–11* 80 8,600 5

051141-55390-0 7" x 7/8" 40 8,600 5

051141-55391-7 7" x 7/8" 60 8,600 5

051141-55392-4 7" x 7/8" 80 8,600 5

Type 29

051141-55418-1 4-1/2" x 5/8–11* 40 13,300 10

051141-55419-8 4-1/2" x 5/8–11* 60 13,300 10

051141-55420-4 4-1/2" x 5/8–11* 80 13,300 10

051141-55423-5 4-1/2" x 7/8" 60 13,300 10

051141-55424-2 4-1/2" x 7/8" 80 13,300 10

051141-55426-6 7" x 5/8–11* 40 8,600 5

051141-55427-3 7" x 5/8–11* 60 8,600 5

051141-55428-0 7" x 5/8–11* 80 8,600 5

051141-55430-3 7" x 7/8" 40 8,600 5

051141-55431-0 7" x 7/8" 60 8,600 5

051141-55432-7 7" x 7/8" 80 8,600 5

*Quick Change Hub Attachment

Right Angle Disc Systems

3M™ Flap Discs

Giant Flap Disc

Standard Flap Disc

More Material.

Longer Life.

3M™ Flap Discs 577F

• Versatile alumina zirconia

mineral works on a variety

of metals and applications

• Durable YF wt. polyester backing

designed for long life on the most

heavy duty grinding applications

UPC Dia. x Ctr. Hole Grade Max. RPM Qty./Case

Type 29

051141-30983-5 4-1/2" x 5/8–11* 36 13,300 10

051141-30984-2 4-1/2" x 5/8–11* 40 13,300 10

051141-30985-9 4-1/2" x 5/8–11* 60 13,300 10

051141-30986-6 4-1/2" x 5/8–11* 80 13,300 10

051141-30987-3 4-1/2" x 7/8" 36 13,300 10

051141-30988-0 4-1/2" x 7/8" 40 13,300 10

051141-30989-7 4-1/2" x 7/8" 60 13,300 10

051141-30990-3 4-1/2" x 7/8" 80 13,300 10

051141-30991-0 7" x 5/8–11* 36 8,600 5

051141-30992-7 7" x 5/8–11* 40 8,600 5

051141-30993-4 7" x 5/8–11* 60 8,600 5

051141-30994-1 7" x 5/8–11* 80 8,600 5

051141-30995-8 7" x 7/8" 36 8,600 5

051141-30996-5 7" x 7/8" 40 8,600 5

051141-30997-2 7" x 7/8" 60 8,600 5

051141-30998-9 7" x 7/8" 80 8,600 5

Type 27

051141-30951-4 4-1/2" x 5/8–11* 36 13,300 10

051141-30952-1 4-1/2" x 5/8–11* 40 13,300 10

051141-30953-8 4-1/2" x 5/8–11* 60 13,300 10

051141-30954-5 4-1/2" x 5/8–11* 80 13,300 10

051141-30955-2 4-1/2" x 7/8" 36 13,300 10

051141-30956-9 4-1/2" x 7/8" 40 13,300 10

051141-30957-6 4-1/2" x 7/8" 60 13,300 10

051141-30958-3 4-1/2" x 7/8" 80 13,300 10

051141-30963-7 7" x 5/8–11* 36 8,600 5

051141-30964-4 7" x 5/8–11* 40 8,600 5

051141-30965-1 7" x 5/8–11* 60 8,600 5

051141-30966-8 7" x 5/8–11* 80 8,600 5

051141-30959-0 7" x 7/8" 36 8,600 5

051141-30960-6 7" x 7/8" 40 8,600 5

051141-30961-3 7" x 7/8" 60 8,600 5

051141-30962-0 7" x 7/8" 80 8,600 5

*Quick Change Hub Attachment

3M™ Giant Flap Discs 577F

• Versatile alumina zirconia

mineral works on a variety

of metals and applications

• 25% more flaps than standard

3M™ Flap Discs 577F

• Delivers longer life and fewer disc changes

UPC Dia. x Ctr. Hole Grade Max. RPM Qty./Case

Type 29

051141-30999-6 4-1/2" x 5/8–11* 36 13,300 10

051141-31000-8 4-1/2" x 5/8–11* 40 13,300 10

051141-31001-5 4-1/2" x 5/8–11* 60 13,300 10

051141-31002-2 4-1/2" x 5/8–11* 80 13,300 10

051141-31003-9 4-1/2" x 7/8" 36 13,300 10

051141-31004-6 4-1/2" x 7/8" 40 13,300 10

051141-31005-3 4-1/2" x 7/8" 60 13,300 10

051141-31006-0 4-1/2" x 7/8" 80 13,300 10

051141-31011-4 7" x 5/8–11* 36 8,600 5

051141-31012-1 7" x 5/8–11* 40 8,600 5

051141-31013-8 7" x 5/8–11* 60 8,600 5

051141-31014-5 7" x 5/8–11* 80 8,600 5

051141-31007-7 7" x 7/8" 36 8,600 5

051141-31008-4 7" x 7/8" 40 8,600 5

051141-31009-1 7" x 7/8" 60 8,600 5

051141-31010-7 7" x 7/8" 80 8,600 5

Type 27

051141-30967-5 4-1/2" x 5/8–11* 36 13,300 10

051141-30968-2 4-1/2" x 5/8–11* 40 13,300 10

051141-30969-9 4-1/2" x 5/8–11* 60 13,300 10

051141-30970-5 4-1/2" x 5/8–11* 80 13,300 10

051141-30971-2 4-1/2" x 7/8" 36 13,300 10

051141-30972-9 4-1/2" x 7/8" 40 13,300 10

051141-30973-6 4-1/2" x 7/8" 60 13,300 10

051141-30974-3 4-1/2" x 7/8" 80 13,300 10

051141-30979-8 7" x 5/8–11* 36 8,600 5

051141-30980-4 7" x 5/8–11* 40 8,600 5

051141-30981-1 7" x 5/8–11* 60 8,600 5

051141-30982-8 7" x 5/8–11* 80 8,600 5

051141-30975-0 7" x 7/8" 36 8,600 5

051141-30976-7 7" x 7/8" 40 8,600 5

051141-30977-4 7" x 7/8" 60 8,600 5

051141-30978-1 7" x 7/8" 80 8,600 5

*Quick Change Hub Attachment

Right Angle Disc Systems

3M™ Flap Discs

Right Angle Disc Systems

Scotch-Brite™ Disc Selection Guide

Light Grinding Blending Deburring Finishing Cleaning Coating Removal

Increased Loading Resistance SC, PD SC, PD SC PD, HS, C&F Bristle, HS, C&F Bristle, HS

Starting Point SL SL SE SC PD C&S

Increased Wear Resistance LGB LGB LGB SL SC C&S XT

Legend

PD PD Surface Conditioning Discs SE SE Surface Conditioning Discs C&F Clean and Finish Discs

LGB Light Grinding and Blending Discs SL SL Surface Conditioning Discs C&S Clean and Strip Discs

SC SC Surface Conditioning Discs HS High Strength Discs C&S XT Clean and Strip XT Discs

Scotch-Brite™ Discs

Make tough jobs easier. Scotch-Brite™ Discs can help you

achieve a burr-free, paintable finish in fewer steps without

damaging the base material. The non-woven, open web,

durable construction is designed to resist loading and greatly

increase the life of the disc. As a result, you will not have to

change it as often. However, when you do change your disc,

the Roloc™ attachment or Hook-and-Loop attachment makes

it fast and easy.

Scotch-Brite™ Disc Perfromance Comparison — Choose the right disc for the job.

Soft or Oily Metals

(i.e. Aluminum)

Mild Steel

(i.e. Carbon Steel)

Harder Metals

(i.e. Stainless Steel)

Works Well on

Most Substrates

Polishing Finishing Blending Light Grinding

Finer Finish and

Less Aggressive

Stiffer and

More Durable Conformable

and Resists Loading

Coarser Finish and

More Aggressive

A-MED

S-SFN

LGB

HD-CRS

LGB

SD-CRS

A-CRS SL HD

A-CRS

SL SD

A-CRS

A-VFN

A-FIN

A-MED

A-CRS

A-Med

A-CRS

Scotch-Brite™ SC Surface Conditioning Discs

(Hook-and-Loop) (cont.)

UPC Diameter Grade Color Max. RPM Min./Case

048011-00752-6 8" A CRS Brown 6,000 25

048011-00670-3 8" A MED Maroon 6,000 25

048011-04306-7 8" A VFN Blue 6,000 25

048011-00649-9†8" A SFN Gray 6,000 25

048011-13325-6†48" A CRS Brown 600 2

048011-13100-9†48" A MED Maroon 600 2

048011-13099-6†48" A VFN Blue 600 2

048011-18385-5†48" A SFN Gray 600 2

† Made-to-Order

Scotch-Brite™ SC Surface

Conditioning Discs

(Hook-and-Loop)

• Aluminum oxide

• Great general purpose surface

conditioning disc

• For finishing, cleaning,

and light deburring

• Attach and remove easily to 3M™ Hook-and-Loop Backup Pads

• Use with right angle and random orbital tools

UPC Diameter Grade Color Max. RPM Min./Case

048011-07458-0 2" A CRS Brown 23,000 50/200

048011-07459-7 2" A MED Maroon 23,000 50/200

048011-04276-3 2" A VFN Blue 23,000 50/200

048011-04127-8†2" A SFN Gray 23,000 50/200

048011-04120-9 3" A CRS Brown 20,000 25/100

048011-04124-7 3" A MED Maroon 20,000 25/100

048011-04277-0 3" A VFN Blue 20,000 25/100

048011-04129-2 3" A SFN Gray 20,000 100

048011-04128-5 3" A SFN Gray 20,000 100

048011-07450-4 4" A CRS Brown 13,000 100

048011-07451-1 4" A MED Maroon 13,000 100

048011-04278-7 4" A VFN Blue 13,000 100

048011-04129-2 4" A SFN Gray 13,000 100

048011-14101-5 4-1/2" A CRS Brown 13,000 50

048011-27671-7 4-1/2" A CRS Brown 13,000 10

048011-27672-4 4-1/2" A MED Maroon 13,000 10

048011-14100-8 4-1/2" A MED Maroon 13,000 50

048011-14099-5 4-1/2" A VFN Blue 13,000 50

048011-14102-2 4-1/2" A SFN Gray 13,000 50

048011-27674-8 5" A CRS Brown 10,000 10

048011-00750-2 5" A CRS Brown 10,000 50

048011-27675-5 5" A MED Maroon 10,000 10

048011-00643-7 5" A MED Maroon 10,000 50

048011-27676-2 5" A VFN Blue 10,000 10

048011-04303-6 5" A VFN Blue 10,000 50

048011-00647-5 5" A SFN Gray 10,000 50

048011-03927-5 6" A CRS Brown 8,000 50

048011-03928-2 6" A MED Maroon 8,000 50

048011-04304-3 6" A VFN Blue 8,000 50

048011-27677-9 7" A CRS Brown 6,000 10

048011-00751-9 7" A CRS Brown 6,000 25

048011-27678-6 7" A MED Maroon 6,000 10

048011-00645-1 7" A MED Maroon 6,000 25

048011-27679-3 7" A VFN Blue 6,000 10

048011-04305-0 7" A VFN Blue 6,000 25

048011-00648-2 7" A SFN Gray 6,000 25

† Made-to-Order

Scotch-Brite™ Discs — Hook-and-Loop

Right Angle Disc Systems

Scotch-Brite™ SL Surface

Conditioning Discs

(Hook-and-Loop)

• Aluminum oxide

• Highly durable product for

aggressive applications

• Cuts fast without sacrificing finish and can work

twice as long as other standard surface conditioning discs

UPC Diameter Grade Max. RPM Qty./Case

048011-33813-2†4" A CRS SD 13,000 100

048011-33810-1†4" A CRS HD 13,000 100

048011-33807-1†4" A CRS 13,000 25/100

048011-33804-0†4" A MED 13,000 100

048011-33814-9 4-1/2" A CRS SD 13,000 50

048011-33811-8 4-1/2" A CRS HD 13,000 50

048011-33808-8 4-1/2" A CRS 13,000 50

048011-33805-7 4-1/2" A MED 13,000 50

048011-33815-6†5" A CRS SD 10,000 50

048011-33812-5†5" A CRS SD 10,000 50

048011-33806-4†5" A CRS HD 10,000 50

048011-33809-5†5" A MED 10,000 50

048011-33789-0 7" A CRS SD 6,000 25

048011-33788-3 7" A CRS HD 6,000 25

048011-33787-6 7" A CRS 6,000 25

048011-33786-9 7" A MED 6,000 25

† Made-to-Order

3M™ Disc Holder (Hook-and-Loop)

Surface Conditioning Disc

Scotch-Brite™ Discs — Hook-and-Loop

Scotch-Brite™ Discs — Center Hole

Right Angle Disc Systems

Scotch-Brite™ Light Grinding

and Blending Disc (Hook-and-Loop)

• Durable, non-woven 3M ceramic aluminum

oxide blend abrasive grain product used for light

grinding applications providing burr-free finish

• For use with the 3M™ Center Pin Backup Pad or

3M™ Fibre Disc Hubs, Face Plates and Retainer Nuts

• Super Duty = Blue; Heavy Duty = Maroon

UPC Dia. x Ctr. Hole Grade Max. RPM Min./Case

048011-60335-3 4-1/2" A CRS HD 10,000 50

048011-60342-1 5" A CRS HD 10,000 50

048011-60345-2 7" A CRS HD 6,000 25

† Made-to-Order

Scotch-Brite™ Light Grinding

and Blending Center Hole Disc

• Durable, non-woven 3M ceramic aluminum

oxide blend abrasive grain product used for light

grinding applications providing burr-free finish

• For use with the 3M™ Center Pin Backup Pad or

3M™ Fibre Disc Hubs, Face Plates and Retainer Nuts

• Super Duty = Blue; Heavy Duty = Maroon

UPC Dia. x Ctr. Hole Grade Max. RPM Min./Case

048011-60363-6 4-1/2" A CRS SD 10,000 50

048011-60333-9†4-1/2" x 7/8" A CRS SD 10,000 50

048011-60332-2†4-1/2" x 7/8" A CRS HD 10,000 50

048011-60343-8 5" A CRS SD 10,000 50

048011-60341-4 5" x 7/8" A CRS SD 10,000 50

048011-60336-0 5" x 7/8" A CRS HD 10,000 50

048011-60346-9 7" A CRS SD 6,000 25

048011-60344-5 7" x 7/8" A CRS SD 6,000 25

048011-60347-6 7" x 7/8" A CRS HD 6,000 25

† Made-to-Order

Scotch-Brite™ Coating Removal

Discs (Hook-and-Loop)

• Extra coarse grade silicon carbide

• Made for right-angle tools from

aggressive Clean & Strip web

• Non-loading design ideal for removing rust and coatings

• Mount on Hook-and-Loop Disc Pad Holders

UPC Diameter Grade Max. RPM Min./Case

Hook-and-Loop

048011-18424-1 4-1/2" S XCS 12,000 4/20

048011-18482-1* 4-1/2" S XCS 12,000 40

048011-18355-8 5" S XCS 10,000 4/20

048011-18483-8* 5" S XCS 10,000 40

048011-18358-9 7" S XCS 6,000 2/10

048011-18485-2* 7" S XCS 6,000 20

*Bulk

Scotch-Brite™ Clean and Finish

Discs (Hook-and-Loop)

• Flexible web for finishing,

blending and polishing

• Conformability allows access

to hard-to-reach areas

UPC Diameter Grade Max. RPM Qty./Case

048011-16001-6 5" A VFN 5,000 100

048011-00661-1 6" A VFN 4,000 100

048011-30037-5 11-1/4" A VFN 1,900 25

Scotch-Brite™ SE Surface

Conditioning Discs

(Hook-and-Loop)

• High cutting surface conditioning disc

great for edge deburring applications

UPC Diameter Grade Max. RPM Min./Case

048011-18021-2 4" A CRS 13,000 100

048011-18475-3†4" A MED 13,000 100

048011-18079-3 4-1/2" A CRS 13,000 50

048011-18476-0 4-1/2" A MED 13,000 50

048011-18080-9 5" A CRS 10,000 50

048011-18919-2†5" A MED 10,000 50

048011-17866-0 7" A CRS 6,000 25

048011-18477-7 7" A MED 6,000 25

048011-30003-0†7" A FIN 6,000 25

048011-17239-2 8" A CRS 6,000 25

048011-93348-1†48" A CRS 600 2

048011-60392-6†48" A FIN 600 2

† Made-to-Order

Scotch-Brite™ HS

Blend & Finish Discs

• Flexible and aggressive

• Tackles weld burn and refinement,

light deburring and rust removal

• Produces a beautifully blended, burr-free finish

UPC Dia. x Ctr. Hole Grade Max. RPM Qty./Case

048011-64145-4 6" x 1/2" A MED 4,000 100

048011-64169-0 8" x 1/2" A MED 3,000 50

048011-64183-6 12" x 1-1/4" A MED 1,900 25

Right Angle Disc Systems

3M™ Power Tools for 3M™ Right Angle Disc Systems

3M™ Disc Sanders

• Versatile, durable and powerful

• 3M™ Gripping Material for added comfort and reduced vibration

• Use with 3M™ and Scotch-Brite™ Abrasive Discs and

Disc Accessories for a variety of metalworking applications

Model No.

Tool Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Air Inlet

Thread

Airflow Rate

SCFM (LPM)

Exhaust

Direction UPC

28408 4–5 (100–127) 1 (744) 12,000 2.31 (1.05) 8.25 (209.6) 4.23 (107.4) 3/8" NPT* 37 (1,048) Rear 051141-28408-8

28622 4–5 (100–127) 1 (744) 12,000 4.03 (1.83) 11.5 (292) 4.70 (119) 3/8" NPT* 37 (1,048) — 051141-28622-8

*Includes 3/8" to 1/4" reducer

2862228408

Scotch-Brite™ Surface

Conditioning Disc Pack 920S

• Contains a variety of grades

of 2" and 3" non-woven

surface conditioning discs

• Used for cleaning, finishing,

blending and deburring applications

• Includes 922 and 923 disc pad holder

UPC Size Min./Case

048011-18253-7 2" and 3" 1/5

Scotch-Brite™ Surface

Conditioning Disc Pack

9145S, 915S, 917S

• Contains a variety of

grades of non-woven

surface conditioning discs

• Used for cleaning, finishing,

blending and deburring applications

• Includes 9145 disc pad holder

UPC Max RPM Catalog No. Size Min./Case

048011-14105-3 13,000 9145S 4-1/2" 1/5

048011-08713-9 10,000 915S 5" 1/5

048011-04270-1 6,000 917S 7" 1/5

9145S Shown

Scotch-Brite™ Surface Conditioning Disc Packs

Scotch-Brite™ Clean and

Strip XT Disc, TN Quick Change

• Extra coarse grade silicon carbide

• Mounts quickly to 4-1/2" and 7" grinders

• Tough open web, ideal for weld

cleaning and removing paint and coatings

• Use with TN Quick Change backup pad

or fibre disc hub and face plate

UPC Dia. x Thk. X AH Grade Max. RPM Min./Case

048011-33194-2 4-1/2" x 1/2" x 5/8–11* S XCS 13,300 10

048011-33196-6 7" x 1/2" x 5/8–11* S XCS 8,600 5

*Quick Change Tinneman Nut Attachment

Scotch-Brite™ Bristle Discs

• Easily remove paint, stains,

adhesives, weld burn, rust

and other surface contaminants

from large areas

UPC Diameter x AH Grade Color Max. RPM Qty./Case

048011-33054-9 4-1/2" x 5/8–11 INT 36 Brown 12,000 10

048011-24241-5 4-1/2" x 5/8–11 INT 50 Green 12,000 10

048011-24242-2 4-1/2" x 5/8–11 INT 80 Yellow 12,000 10

048011-24243-9 4-1/2" x 5/8–11 INT 120 White 12,000 10

Scotch-Brite™ Light Grinding and

Blending Discs TN Quick Change

• 3M ceramic abrasive grain

• Aggressive, long life, consistent finish

• Resistant to edge wear

• Super Duty: Blue

• Heavy Duty: Maroon

UPC Diameter x AH Grade Max. RPM Qty./Case

048011-60349-0 4-1/2" x 5/8–11* A CRS SD 13,000 50

048011-60348-3 4-1/2" x 5/8–11* A CRS HD 13,000 50

048011-60351-3 5" x 5/8–11* A CRS SD 12,000 50

048011-60350-6 5" x 5/8–11* A CRS HD 12,000 50

048011-60353-7 7" x 5/8–11* A CRS SD 8,600 25

048011-60352-0 7" x 5/8–11* A CRS HD 8,600 25

*Quick Change Tinneman Nut Attachment

Scotch-Brite™ Discs — TN Quick Change

Scotch-Brite™ EXL Unitized Discs

• High performance and durability for

deburring and finishing applications

• A layered, durable unitized disc construction

UPC Dia. x Ctr. Hole Grade Max. RPM Qty./Case

Type 27

048011-28201-4 4-1/2" x 7/8" 2S FIN 11,000 5

048011-27689-2 4-1/2" x 7/8" 6S FIN 13,300 5

048011-29200-7 4-1/2" x 7/8" 8A CRS 13,300 5

Product Name UPC Qty./Case For Use With Size/Description Max RPM

3M™ Disc Pad Hub 051141-28442-2 10 Short shaft tools 2-1/2" Diameter; 3/8–24 metal insert N/A

051144-45205-7 10 3M™ Disc Pad Face Plates (all sizes) 2-1/2" Diameter; 5/8–11 metal insert N/A

051144-88743-9 10 3M™ Disc Pad Face Plates

(all sizes, tool shaft length 1/2" or less) 2-1/2" Diameter; 5/8–11 metal insert N/A

051144-11824-3 1 3M™ Disc Pad Face Plates (4"– 9") 2-1/2" Diameter; 5/8–11 metal insert N/A

051144-11823-6 1 3M™ Disc Pad Face Plates (7"– 9") 4-1/2" Diameter; 5/8–11 metal insert N/A

051144-45190-6 10 3M™ Disc Pad Face Plates (7"– 9") 4-1/2" Diameter; 5/8–11 metal insert N/A

3M™ Low Profile Disc Pad Hub

051141-28476-7 10

3M™ Disc Pad Face Plates

(all sizes, tool shaft length

1/2" or less; 5/8" or more)

2-1/2" Diameter;

5/8–11 metal insert N/A

3M™ Disc Pad Face Plates 051144-13325-3 10 Fibre Discs 4-1/2" Diameter; Smooth; Medium – Gray 13,300

051144-14270-5 10 Fibre Discs 4-1/2" Diameter; Smooth; Hard – Black 13,300

051141-28443-9 10 Fibre Discs 4-1/2" Diameter; Ribbed; Extra Hard – Red 13,300

051144-81734-4 10 Fibre Discs 5" Diameter; Ribbed; Medium – Gray 12,000

051144-81733-7 10 Fibre Discs 5" Diameter; Ribbed; Hard – Black 12,000

051144-81732-0 10 Fibre Discs 5" Diameter; Ribbed; Extra Hard – Red 12,000

051144-80516-7 10 Fibre Discs 7" Diameter; Ribbed; Medium – Gray 8,600

051144-80515-0 10 Fibre Discs 7" Diameter; Ribbed; Hard – Black 8,600

051144-80514-3 10 Fibre Discs 7" Diameter; Ribbed; Extra Hard – Red 8,600

051144-81729-0 10 Fibre Discs 9" Diameter; Ribbed; Hard – Black 6,600

051144-81728-3 10 Fibre Discs 9" Diameter; Ribbed; Extra Hard – Red 6,600

3M™ TN Quick Change

Disc Backup Pad

051111-56573-5 5 4-1/2" TN Discs 4-1/2" x 5/8–11 INT 13,300

3M™ Disc Retainer Nuts 051111 -51047-6 10

3M™ Disc Pad Face Plates

and Disc Pad Hubs

5/16" Depth; 5/8–11 Thread N/A

051144 -05622-4 10 3/8" Depth; 5/8–11 Thread N/A

051144 -05621-7 10 1/2" Depth; 5/8–11 Thread N/A

051144 -05620-0 10 5/8" Depth; 5/8–11 Thread N/A

Accessories for 3M™ Right Angle Disc Systems

3M™ Power Tools for 3M™ Right Angle Disc Systems

Right Angle Disc Systems

3M™ Sander/Buffer

Model No.

Tool Dia.

Inch (mm)

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Air Inlet

Thread

Airflow Rate

SCFM (LPM) UPC

28773 5–6 (127–152) 1 (744) 3,500 3.3 (1.5) 10 (254) 4 (95) 1/4" NPT 37 (1,048) 051141-28773-7

28773

Right Angle Disc Systems

Accessories for 3M™ Right Angle Disc Systems

Product Name UPC Qty./Case For Use With Size/Description Max RPM

3M™ Disc Holder Adapter No. 9 048011-22971-3 10 Converts grinders with

M10–1.25, M10–1.5 or

3/8–24 EXT threaded shaft to

a 5/8–11 EXT threaded shaft

M10–1.25 INT N/A

048011-22972-0 10 M10–1.50 INT N/A

048011-22970-6 10 3/8–24 INT N/A

Flap Disc Adapter Nut

051144-88765-1 1 Pair/

5 Pairs

Secures 4-1/2" diameter flap

discs to right angle tool with

a 5/8–11 threaded shaft

5/8–11 Thread N/A

Flap Disc Holder

051144-88769-9 1 Backup plate for 7" diameter

flap discs 4" Diameter; 5/8–11 Thread N/A

3M™ Hook-and-Loop

Disc Pad Holder

051141-20245-7 1 Scotch-Brite™ Light Grinding

and Blending Disc Accessories

7" x 7/8" Center Post;

5/8–11 INT 8,500

3M™ Hook-and-Loop

Disc Pad Holders 048011-07494-8 10 Scotch-Brite™ Surface

Conditioning Discs

2" (1/4" shank);

Cat. No. 922 23,000

048011-04132-2 10 Scotch-Brite™ Surface

Conditioning Discs

3" (1/4" shank);

Cat. No. 923 20,000

048011-07492-4 5 Scotch-Brite™ Surface

Conditioning Discs

4" (1/4" shank);

Cat. No. 924 13,000

048011-05674-6 1 Scotch-Brite™ Surface

Conditioning Discs

4" x 1/8" x 3/8" 5/8–11 INT;

Cat. No. 914 13,000

048011-14111-4 1 Scotch-Brite™ Surface

Conditioning Discs

4-1/2" x 5/8–11 INT;

Cat. No. 9145 13,000

048011-05680-7 1 Scotch-Brite™ Surface

Conditioning Discs

5" x 5/8–11 INT;

Cat. No. 915 13,000

048011-09450-2 1 Scotch-Brite™ Surface

Conditioning Discs

7" x 5/8–11 INT;

Cat. No. 917 6,000

051141-20279-2 1 Scotch-Brite™ Surface

Conditioning Discs

7" x 1" x 5/8–11 INT;

Cat. No. 947TH 6,000

048011-09451-9 1 Scotch-Brite™ Surface

Conditioning Discs

8" x 5/16" x 3/8" 5/8–11 INT;

Cat. No. 918 6,000

3M™ Hookit™ Disc Pad 051144-85096-9 10 Scotch-Brite™ Coating

Removal Discs 5" x 5/8" x 5/8–11 INT 12,000

051144-85105-8 10 Scotch-Brite™ Coating

Removal Discs 5" x 3/4" x 5/8–11 INT 12,000

051144-13627-8 1 Scotch-Brite™ Coating

Removal Discs 7" x 1" x 5/8–11 INT 6,000

3M™ Stikit™ Disc Pads 051144-05579-1 1 3M™ Stikit™ Discs 8" x 5/8–11 INT 3,000

051111-55813-3 5 3M™ Stikit™ Discs 5" x 1/2" 5/8–11 INT 12,000

051144-82189-1 10 3M™ Stikit™ Discs 5" x 3/4" 5/8–11 INT 12,000

Disc Pad

Holder No.

947TH

Disc Pad Holder

No. 918

Disc Pad Holder

No. 924

Disc Pad

Holder

No. 914

Disc Pad Holder

No. 917

Disc Pad Holder

No. 922 and 923

Disc Pad

Holder

No. 9145

and 915

Roloc™

Systems

Roloc™ Systems

3M™ Roloc™ Cloth Disc Selection Guide

Product Mineral Type Features Metal Type Performance Grinding

Light

Grinding Blending Deburring

361F Aluminum Oxide General purpose grinding, light grinding, blending,

and deburring on all metals All Metals Good

461F Silicon Carbide Ideal for grinding glass, titanium and non-ferrous metals Titanium Good

777F Ceramic Aluminum

Oxide Blend Durable Y wt. Cloth backing; Grinding aid Stainless Steel;

Nickel Alloy Better

963G Ceramic

Abrasive Grain Durable backing Carbon Steel Best

977F Ceramic

Abrasive Grain Durable 2-ply backing; Grinding aid Stainless Steel;

Nickel Alloy Best

984F Precision Shaped

Ceramic Grain Durable 2-ply backing; Grinding aid; Fastest cutting All Metals Premium

3M™ Roloc™ Fiber Disc Selection Guide

Product Mineral Type Features Metal Type Performance Grinding

Light

Grinding Blending Deburring

501C Aluminum Zirconia

Versatile disc for use on a wide variety

of metals; General purpose grinding,

blending and finishing on all metals

All Metals Good

785C Ceramic Aluminum

Oxide Blend Excellent for stainless steel; Grinding aid Stainless Steel Better

988R Ceramic

Abrasive Grain

Unique single-piece construction that can eliminate

button delamination and enhance disc performance;

Cut through metal stock to quickly level welds and

take on tough jobs in small areas

Mild Steel Best

982C Precision Shaped

Ceramic Grain Fastest cutting; Longest life All Metals Premium

3M™ Roloc™ Discs

3M™ Roloc™ Discs provide a fast, efficient method for grinding, blending, leveling and finishing on all types of metal. They lock

securely in place with just a half twist…another half twist and they’re off. Each disc is color coded by grade. (This does not

include 3M Roloc TSM products.)

3M™ Roloc™ Discs

Roloc™ Disc Button Color/Grade Chart

24/Black

36/Brown

50/Green

60/Orange

80/Yellow

100/Blue

120/White

150/Black

180/Brown

240/Green

Optimum Tool Speeds to Maximize 3M™ Roloc™ Disc

Cut Rates and Life

Disc Size

Material

Stainless Aluminum Steel Titanium

1-1/2" 20,000 RPM 30,000 RPM 30,000 RPM 9,000 RPM

2" 15,000 RPM 20,000 RPM 20,000 RPM 7,000 RPM

3" 10,000 RPM 15,000 RPM 15,000 RPM 4,500 RPM

4" 8,000 RPM 9,000 RPM 9,000 RPM 3,000 RPM

Attachment Type

Product ID TP TR TSM TS

361F • • •

461F •

777F • • •

963G •

977F •

982C • •

984F • •

501C • •

785C •

983C/988C •

988R •

3M™ Roloc™ Attachment System Guide

Attachment Type

Diameter TP TR TSM TS

3/4" • • •

1" • • • •

1-1/2" • • • •

2" • • • •

3" • • • •

4" • • •

TP (Plastic Button) TR (Plastic Button)

TSM (Metal Button) TS (Plastic Button)

Roloc™ Systems

3M™ Cubitron™ II Roloc™

Fibre Disc 982C

• Made with revolutionary 3M precision

shaped grain technology

• Provides long life and fast cut

• Rigid fibre backing enables fast, more aggressive cutting

• Optimized for use on carbon steel

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051115-66778-7 2" 36+ 25,000 50/200

051115-66783-1 2" 60+ 25,000 50/200

051115-66788-6 2" 80+ 25,000 50/200

051115-66779-4 3" 36+ 20,000 50/200

051115-66784-8 3" 60+ 20,000 50/200

051115-66789-3 3" 80+ 20,000 50/200

051115-66780-0 4" 36+ 12,000 25/100

051115-66785-5 4" 60+ 12,000 25/100

051115-66790-9 4" 80+ 12,000 25/100

Roloc TSM (Metal Button)

051115-66781-7 2" 36+ 25,000 50/200

051115-66786-2 2" 60+ 25,000 50/200

051115-66791-6 2" 80+ 25,000 50/200

051115-66782-4 3" 36+ 20,000 50/200

051115-66787-9 3" 60+ 20,000 50/200

051115-66792-3 3" 80+ 20,000 50/200

3M™ Cubitron™ II Roloc™ Discs

3M precision shaped grain sharpens as it wears. Compared to

conventional ceramic abrasive grain, 3M™ Cubitron™ II Abrasive Discs

cut faster and last longer!

Conventional Ceramic 3M™ Cubitron™ II

Triangular-shaped grain (right) is electrostatically oriented to form

sharp peaks, each acting like individual cutting tools that wear evenly

for super long life and consistency.

Precision Shaped GrainConventional Grain

3M Precision Shaped Grain

3M™ Cubitron™ II Roloc™

Durable Edge Disc 984F

• Made with revolutionary 3M precision

shaped grain technology

• Features a durable edge

backing and a grinding aid

• For grinding, blending and deburring of light

to medium pressure applications for virtually all metal types

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051144-27700-4 1-1/2" 36+ 30,000 50/200

051144-27708-0 1-1/2" 60+ 30,000 50/200

051144-27716-5 1-1/2" 80+ 30,000 50/200

051144-27701-1 2" 36+ 25,000 50/200

051144-27709-7 2" 60+ 25,000 50/200

051144-27717-2 2" 80+ 25,000 50/200

051144-27702-8 3" 36+ 20,000 50/200

051144-27710-3 3" 60+ 20,000 50/200

051144-27718-9 3" 80+ 20,000 50/200

051144-27703-5 4" 36+ 12,000 25/100

051144-27711-0 4" 60+ 12,000 25/100

051144-27719-6 4" 80+ 12,000 25/100

Roloc TSM (Metal Button)

051144-27704-2 1-1/2" 36+ 30,000 50/200

051144-27712-7 1-1/2" 60+ 30,000 50/200

051144-27720-2 1-1/2" 80+ 30,000 50/200

051144-27705-9 2" 36+ 25,000 50/200

051144-27713-4 2" 60+ 25,000 50/200

051144-27721-9 2" 80+ 25,000 50/200

051144-27706-6 3" 36+ 20,000 50/200

051144-27714-1 3" 60+ 20,000 50/200

051144-27722-6 3" 80+ 20,000 50/200

051144-27707-3 4" 36+ 12,000 25/100

051144-27715-8 4" 60+ 12,000 25/100

051144-27723-3 4" 80+ 12,000 25/100

Roloc™ Systems

3M™ Cubitron™ II Roloc™ Discs

1/4" x 1/4"-20

Threaded Shaft

PN 45102

3M™ Roloc™

Disc Pad

3M™ Roloc™

Disc or Wheel

1/4" Collet Mount

“Tall”

= For Hard To Reach Applications

= Allows More Accessory & Abrasives Options

3M™ Roloc™

Disc Pad

Sander Adapter

PN 06582

3M™ Roloc™

Disc or Wheel

Direct Mount

“Short”*

= Low Profile

= Less Vibration

= Better Control

Optional

1/4" Collet

(assembly included with tool)**

Spacers available for all 5/8–11 tools.

3M™ Roloc™ Disc 361F

• Aluminum oxide on a

YF wt. cloth backing

• General purpose grinding,

blending and finishing on

all metals

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051144-11412-2 1" 36 30,000 50/500

051144-11411-5 1" 50 30,000 50/500

051144-11417-7 1" 60 30,000 50/500

051144-11416-0 1" 80 30,000 50/500

051144-11415-3 1" P100 30,000 50/500

051144-11414-6 1" P120 30,000 50/500

051144-11452-8†1-1/2" 24 30,000 50/500

051144-22396-1 1-1/2" 36 30,000 50/500

051144-11137-4 1-1/2" 50 30,000 50/500

051144-22397-8 1-1/2" 60 30,000 50/500

051144-22407-4 1-1/2" 80 30,000 50/500

051144-22408-1 1-1/2" P100 30,000 50/500

051144-22409-8 1-1/2" P120 30,000 50/500

051144-11000-1 2" 24 25,000 50/200

051144-22398-5 2" 36 25,000 50/200

051144-22399-2 2" 50 25,000 50/200

051144-22400-5 2" 60 25,000 50/200

051144-22401-2 2" 80 25,000 50/200

051144-22402-9 2" P100 25,000 50/200

051144-22403-6 2" P120 25,000 50/200

051144-14559-1 2" P150 25,000 50/200

051144-13873-9 2" P180 25,000 50/200

051144-11419-1 2" P240 25,000 50/200

051144-22392-3 3" 24 20,000 50/200

051144-22393-0 3" 36 20,000 50/200

051144-22394-7 3" 50 20,000 50/200

051144-22395-4 3" 60 20,000 50/200

051144-22404-3 3" 80 20,000 50/200

051144-22405-0 3" P100 20,000 50/200

051144-22406-7 3" P120 20,000 50/200

051144-82244-7 3" P150 20,000 50/200

051144-11418-4 3" P240 20,000 50/200

051144-76429-7 4" 36 12,000 25/100

051144-11421-4 4" 60 12,000 25/100

051144-11420-7 4" 80 12,000 25/100

† Made-to-Order

3M™ Roloc™ Disc 361F

UPC Diameter Grade Max. RPM Min./Case

Roloc TSM (Metal Button)

051111-49932-0 1-1/2" 36 30,000 50/500

051111-49933-7 1-1/2" 60 30,000 50/500

051111-49934-4 1-1/2" 80 30,000 50/500

051111-51039-1 1-1/2" P100 30,000 50/500

051111- 51038-4†1-1/2" P120 30,000 50/500

051111-49936-8 2" 36 25,000 50/200

051111-49937-5 2" 60 25,000 50/200

051111-49938-2 2" 80 25,000 50/200

051111-51034-6 2" P100 25,000 50/200

051111-49939-9 2" P120 25,000 50/200

051111-51033-9 3" 36 20,000 50/200

051111-49940-5 3" 60 20,000 50/200

051111-49941-2 3" 80 20,000 50/200

051111-49942-9 3" P100 20,000 50/200

051111-49943-6 3" P120 20,000 50/200

Roloc TP (Metal Button)

051111-82401-4 2" 40 25,000 50/200

051111-76806-6 2" 60 25,000 50/200

051111-76810-3 2" 80 25,000 50/200

051111-77115-8†2" 100 25,000 50/200

051111-22393-0 3" 36 20,000 50/200

051111-22394-7 3" 50 20,000 50/200

051111-22395-4 3" 60 20,000 50/200

051111-22404-3 3" 80 20,000 50/200

051111-22405-0 3" P100 20,000 50/200

† Made-to-Order

3M™ Roloc™ Disc 461F

• Silicon carbide on a YF wt. cloth

backing gives stainless steel a

brighter finish

• Ideal for grinding glass, titanium

and non-ferrous metals

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051144-12956-0 2" P60 25,000 50/200

051144-12954-6 2" P80 25,000 50/200

051144-12957-7 3" P60 20,000 50/200

051144-12955-3 3" P80 20,000 50/200

Mild Steel Stainless Steel

Roloc™ Systems

3M™ Roloc™ Discs

3M™ Roloc™

Fibre Disc 501C

• Aluminum zirconia

• Durable fibre backing

• Versatile disc for use on

a wide variety of metals

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051141-20645-5 2" 36 25,000 50/200

051111-50748-3 2" 50 25,000 50/200

051111-50749-0 2" 60 25,000 50/200

051111-50750-6 2" 80 25,000 50/200

051111-50743-8 3" 36 20,000 50/200

051111-50744-5 3" 50 20,000 50/200

051111-50745-2 3" 60 20,000 50/200

Roloc TSM (Metal Button)

051111-50755-1 2" 36 25,000 50/200

051111-50756-8 2" 50 25,000 50/200

051111-50757-5 2" 60 25,000 50/200

051111-50758-2 2" 80 25,000 50/200

051111-50751-3 3" 36 20,000 50/200

051111-50752-0 3" 50 20,000 50/200

051111-50753-7 3" 60 20,000 50/200

051111-50754-4 3" 80 20,000 50/200

3M™ Roloc™ Disc 777F

• 3M ceramic aluminum oxide

blend abrasive grain

• Cloth backing for durability

• Grinding aid for cooler running

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051144-76622-2 1" 36 30,000 50/500

051144-76623-9 1" 50 30,000 50/500

051144-76624-6 1" 60 30,000 50/500

051144-76625-3 1" 80 30,000 50/500

051144-80510-5 1" P120 30,000 50/500

051144-76626-0 1-1/2" 36 30,000 50/500

051144-76627-7 1-1/2" 50 30,000 50/500

051144-76628-4 1-1/2" 60 30,000 50/500

051144-14660-4 1-1/2" 80 30,000 50/500

051144-80511-2 1-1/2" P120 30,000 50/500

051144-76629-1 2" 36 25,000 50/200

051144-76630-7 2" 50 25,000 50/200

051144-76433-4 2" 60 25,000 50/200

051144-14661-1 2" 80 25,000 50/200

051144-80508-2 2" P100 25,000 50/200

051144-80512-9 2" P120 25,000 50/200

051144-76631-4 3" 36 20,000 50/200

051144-76632-1 3" 50 20,000 50/200

051144-76633-8 3" 60 20,000 50/200

051144-76634-5 3" 80 20,000 50/200

051144-80509-9 3" P100 20,000 50/200

051144-80513-6 3" P120 20,000 50/200

Roloc TSM (Metal Button)

051111-49949-8 2" 36 25,000 50/200

051111-50253-2 2" 60 25,000 50/200

051111-50254-9 2" 80 25,000 50/200

051111-50255-6 2" 100 25,000 50/200

051111-50256-3 2" P120 25,000 50/200

051111-50257-0 3" 36 20,000 50/200

Roloc TP (Metal Button)

051144-76770-0†2" 60 25,000 50/200

051144-76743-4†3" 36 20,000 50/200

051144-76763-2†3" 36 20,000 50/200

051144-76767-0†3" 50 20,000 50/200

Roloc TS (Plastic Button)

051144-76742-7 2" 36 25,000 50/200

051144-76746-5 2" 50 25,000 50/200

051144-76750-2 2" 60 25,000 50/200

051144-76743-4†3" 36 20,000 50/200

051144-76747-2†3" 50 20,000 50/200

051144-76751-9 3" 60 20,000 50/200

051144-76755-7 3" 80 20,000 50/200

† Made-to-Order

Mild Steel Stainless Steel

Roloc™ Systems

3M™ Roloc™ Discs

3M™ Roloc™ Discs 988R

• 3M ceramic abrasive grain

• Cuts through metal stock to

quickly level welds and take

on tough jobs in small areas

• A unique single-piece construction

that can eliminate button delamination

and enhance disc performance

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051141-20626-4 2" 24 25,000 50/200

051141-20627-1 2" 36 25,000 50/200

051141-20628-8 2" 50 25,000 50/200

051141-20629-5 2" 60 25,000 50/200

051141-20630-1 2" 80 25,000 50/200

051141-20024-8 3" 24 20,000 50/200

051141-20025-5 3" 36 20,000 50/200

051141-20026-2 3" 50 20,000 50/200

051141-20030-9 3" 60 20,000 50/200

051141-20027-9 3" 80 20,000 50/200

3M™ Roloc™ Fibre Disc 785C

• 3M ceramic aluminum oxide

blend abrasive grain

• Durable fibre backing

• An excellent starting point for stainless steel

• Includes a grinding aid for cooler running

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051144-85882-8†3" 24 20,000 50/100

051144-85883-5 3" 36 20,000 50/100

051144-85884-2 3" 50 20,000 50/100

051144-85885-9 3" 60 20,000 50/100

051144-85886-6 3" 80 20,000 50/100

051144-85887-3 3" P100 20,000 50/200

051144-85888-0 3" P120 20,000 50/200

051144-83690-1 4" 36 12,000 25/100

051144-83691-8 4" 50 12,000 25/100

051144-83692-5 4" 60 12,000 25/100

051144-83693-2 4" 80 12,000 25/100

051144-83694-9 4" P100 12,000 25/100

051144-83695-6 4" P120 12,000 25/100

† Made-to-Order

3M™ Roloc™ Cloth Disc 963G

• 3M ceramic abrasive grain

• Durable cloth backing

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051144-11422-1†1" 50 30,000 50/500

051144-11428-3 1" 60 30,000 50/500

051144-11427-6 1" 80 30,000 50/500

051144-11425-2 1" 120 30,000 50/500

051144-11450-4 1-1/2" 36 30,000 50/500

051144-11448-1 1-1/2" 60 30,000 50/500

051144-11455-9 1-1/2" 80 30,000 50/500

051144-11454-2†1-1/2" 100 30,000 50/500

051144-11453-5 1-1/2" 120 30,000 50/500

051144-11113-8 2" 24 25,000 50/200

051144-11112-1 2" 36 25,000 50/200

051144-76436-5 2" 40 25,000 50/200

051144-11111-4 2" 50 25,000 50/200

051144-11110-7 2" 60 25,000 50/200

051144-11109-1 2" 80 25,000 50/200

051144-11107-7 2" 100 25,000 50/200

051144-11106-0 2" 120 25,000 50/200

051144-11108-4 3" 24 20,000 50/200

051144-11105-3 3" 36 20,000 50/200

051144-11104-6 3" 50 20,000 50/200

051144-11103-9 3" 60 20,000 50/200

051144-11102-2 3" 80 20,000 50/200

051144-11101-5 3" 100 20,000 50/200

051144-11100-8 3" 120 20,000 50/200

† Made-to-Order

3M™ Roloc™ Disc 977F

• 3M ceramic abrasive grain

• Features a grinding aid

• Excellent for stainless steel,

titanium and high nickel alloys.

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051144-83587-4 2" 36 25,000 50/200

051144-83588-1 2" 60 25,000 50/200

051144-83589-8 2" 80 25,000 50/200

051144-83590-4†3" 36 20,000 50/200

051144-83591-1 3" 60 20,000 50/200

051144-83592-8 3" 80 20,000 50/200

Roloc TSM (Metal Button)

051141-24005-3 1-1/2" 36 30,000 50/500

051141-24006-0 1-1/2" 60 30,000 50/500

051141-24003-9 2" 36 25,000 50/200

051141-24004-6 2" 60 25,000 50/200

† Made-to-Order

Mild Steel Stainless Steel

Roloc™ Systems

3M™ Roloc™ Discs

Roloc™ Systems

Scotch-Brite™ Roloc™ Discs

Scotch-Brite™ Roloc™ SC

Surface Conditioning Discs

• Scotch-Brite surface conditioning

non-woven web provides a

burr-free decorative finish

• Removes grind marks, rust and coatings

• Grade: A VFN – Blue; A MED – Maroon; A CRS – Brown

UPC Diameter Grade Max. RPM Min./Case

Roloc TP (Plastic Button)

048011-13237-2 2" A CRS 25,000 50/200

048011-13241-9 3" A CRS 18,000 25/100

048011-13243-3†3" A VFN 18,000 25/100

Roloc TR (Plastic Button)

048011-15393-3 1" A CRS 30,000 200

048011-15392-6 1" A MED 30,000 200

048011-15391-9 1" A VFN 30,000 200

048011-15568-5†1" A SFN 30,000 200

048011-08764-1 1-1/2" A CRS 30,000 50/200

048011-08765-8 1-1/2" A MED 30,000 50/200

048011-08766-5 1-1/2" A VFN 30,000 50/200

048011-08767-2†1-1/2" A SFN 30,000 50/200

048011-05528-2 2" A CRS 25,000 50/200

048011-05527-5 2" A MED 25,000 50/200

048011-05522-0 2" A SFN 25,000 50/200

048011-05523-7 2" A VFN 25,000 50/200

048011-05532-9 3" A CRS 18,000 25/100

048011-05531-2 3" A MED 18,000 25/100

048011-05529-9 3" A SFN 18,000 25/100

048011-05530-5 3" A VFN 18,000 25/100

048011-12954-9 4" A CRS 12,000 25/100

048011-12953-2 4" A MED 12,000 25/100

048011-12951-8†4" A SFN 12,000 100

048011-12952-5 4" A VFN 12,000 25/100

Roloc TSM (Metal Button)

048011-13249-5†1-1/2" A CRS 30,000 50/200

048011-25775-4 1-1/2" A CRS 30,000 50/200

048011-25774-7†1-1/2" A MED 30,000 50/200

048011-25773-0†1-1/2" A VFN 30,000 50/200

048011-25765-5 2" A CRS 25,000 50/200

048011-25764-8 2" A MED 25,000 50/200

048011-25770-9 2" A VFN 25,000 50/200

048011-25767-9 3" A CRS 18,000 25/100

048011-13257-0 3" A CRS 18,000 25/100

048011-25766-2 3" A MED 18,000 25/100

048011-13258-7 3" A MED 18,000 25/100

048011-25780-8 3" A VFN 18,000 25/100

048011-13259-4 3" A VFN 18,000 25/100

048011-13260-0†3" A SFN 18,000 25/100

† Made-to-Order

Scotch-Brite™ Roloc™ SE

Surface Conditioning Discs

• This coarse, tough, aggressive

non-woven disc is ideal for

heavy-duty deburring and finishing

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

048011-18081-6 2" A CRS 25,000 50/200

048011-18471-5 2" A MED 25,000 50/200

048011-30005-4 2" A FIN 25,000 50/200

048011-18082-3 3" A CRS 18,000 25/100

048011-18472-2 3" A MED 18,000 25/100

048011-93453-2 3" A FIN 18,000 25/100

Scotch-Brite™ Roloc™ SL

Surface Conditioning Discs

• Cuts fast without sacrificing finish

• Can last up to twice as long as

other surface conditioning discs

• Delivers outstanding value

and productivity improvement

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

048011-33797-5 2" A CRS SD 25,000 200

048011-33795-1 2" A CRS HD 25,000 200

048011-33796-8 3" A CRS SD 18,000 100

048011-33794-4 3" A CRS HD 18,000 100

Many other sizes available upon request.

Scotch-Brite™ Roloc™ PD

Surface Conditioning Discs

• Lofty, open non-woven abrasive disc

• Resistant to loading on soft

metals and oily surfaces

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

048011-60191-5†2" A CRS 25,000 50/200

048011-24287-3 2" A MED 25,000 50/200

048011-60192-2 3" A CRS 18,000 25/100

048011-24295-8 3" A MED 18,000 25/100

† Made-to-Order

Roloc™ Systems

Scotch-Brite™ Roloc™ Discs

Scotch-Brite™ Roloc™

Light Grinding and

Blending Discs

• 3M ceramic aluminum

oxide blend abrasive grain

• Resists edge wear

• Great for light grinding, deburring and blending on all metals

• Super Duty: Blue

• Heavy Duty: Maroon

UPC Diameter Grade Max. RPM Qty./Case

Roloc TR (Plastic Button)

048011-60355-1 2" A CRS SD 25,000 50/200

048011-60354-4 2" A CRS HD 25,000 50/200

048011-60357-5 3" A CRS SD 18,000 25/100

048011-60356-8 3" A CRS HD 18,000 25/100

048011-60359-9 4" A CRS SD 12,000 25/100

048011-60358-2 4" A CRS HD 12,000 25/100

Roloc TSM (Metal Button)

048011-60375-9 2" A CRS SD 25,000 50/200

048011-60374-2 2" A CRS HD 25,000 50/200

048011-60377-3 3" A CRS SD 18,000 100

048011- 60376-6†3" A CRS HD 18,000 100

† Made-to-Order

Scotch-Brite™ Roloc™

Clean and Strip Discs

• Aggressively removes paint, rust and seam sealers

• Open web construction for cool running

and resistance to loading and smearing

• Faster cutting than wire brushes and

wheels to increase production

UPC Size Grade Max. RPM Qty./Case

048011-14784-0 4" x 1" S XCS 8,000 10

048011-14780-2 4" x 1" x 1/4" S XCS 8,000 10

Scotch-Brite™ Roloc™

HS Blend and Finish

• Aluminum oxide mineral

• New high strength nonwoven

with superior durability and cut

• Great flexibility and conformability for weld

burn removal, light deburring, blending, finishing and rust removal

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

048011-64190-4 2" A MED 18,000 200

048011-64206-2 3" A MED 15,000 100

Roloc TSM (Metal Button)

048011-64213-0 2" A MED 18,000 200

048011-64220-8 3" A MED 15,000 100

Scotch-Brite™ Roloc™

Clean and Strip XT Disc

• Silicon carbide mineral

• Durable, rigid, long lasting

• Aggressive, open-web disc for cleaning

welds, removing rust and paint

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

048011-30147-1 2" x NH S XCS 18,000 60

048011-30016-0 3" x NH S XCS 15,000 40

Scotch-Brite™ Roloc™ Discs

Roloc™ Systems

Scotch-Brite™ Roloc™

EXL Unitized Wheels

• Strong, efficient products for

edge deburring and finishing

• Used with 3M™ Roloc™ or

3M™ Roloc™+ holder pads on

a straight shaft or right-angle tool

UPC Diameter Grade Max. RPM Qty./Case

Roloc TR (Plastic Button)

048011-17185-2 2" 2A MED 22,100 60

048011-17183-8 2" 2S FIN 22,100 60

048011-17190-6 2" 6A MED 22,100 60

048011-17192-0 2" 8A MED 22,100 60

048011-17186-9 3" 2A MED 15,100 40

048011-17184-5 3" 2S FIN 15,100 40

048011-17191-3 3" 6A MED 15,100 40

048011-17193-7 3" 8A MED 15,100 40

Scotch-Brite™ Roloc™

Coating Removal Discs

• Extra coarse grade silicon carbide

• Heavy duty, semi-open web

used to clean rust and paint

• Color: Black

UPC Diameter Grade Max. RPM Min./Case

048011-18364-0 2" S XCS 18,000 60

048011-18350-3 3" S XCS 15,000 40

048011-18470-8 4" S XCS 11,000 40

Scotch-Brite™ Roloc™

Body Man’s Bristle Disc

• Contains 3M ceramic aluminum

oxide blend abrasive grain

• Removes high loading materials

fast and doesn’t load

• Great for removing rubberized

undercoating, seam sealer, rust and paint

• Maintains high quality product life

UPC Diameter Grade Max. RPM Min./Case

051131-07540-5 1" 36 30,000 6/36

051131-07536-8 2" 36 25,000 4/24

051131-07537-5 3" 36 18,000 3/18 Scotch-Brite™ Roloc™

Rapid Cut Unitized Wheels

• Non-woven abrasive wheels

utilizing 3M precision shaped

ceramic grain for higher levels of cut

while maintaining a consistent finish

• Recommended for deburring

and weld blending on all metals

• Quick change Roloc™ Attachment

UPC Size Grade Max. RPM Qty./Case

Roloc TR (Plastic Button)

051115-66759-6 2" x NH 9C CRS+ 22,100 15/60

048011-64859-0 3" x NH 9C CRS+ 15,100 10/40

051115-66760-2 3" x NH 9C XCS+ 15,100 10/40

Roloc TS (Plastic Button)

051115-66763-3 2" x NH 9C CRS+ 22,100 15/60

051115-66764-0†3" x NH 9C XCS+ 15,100 10/40

Scotch-Brite™ Roloc™

Bristle Discs

• Efficiently clean and strip many

substances from metal surfaces

without damaging the work piece

• An operator can quickly and easily achieve

a quality, consistent finish with light pressure

UPC Size Grade Color Max. RPM Min./Case

Roloc TR (Plastic Button)

048011-18698-6 1" 50 Green 30,000 20/80

048011-18706-8 1" 80 Yellow 30,000 20/80

048011-18710-5 1" 120 White 30,000 20/80

048011-18730-3 2" 50 Green 25,000 10/40

048011-18732-7 2" 80 Yellow 25,000 10/40

048011-18733-4 2" 120 White 25,000 10/40

048011-18734-1 3" 50 Green 15,000 10/40

048011-18736-5 3" 80 Yellow 15,000 10/40

048011-18737-2 3" 120 White 15,000 10/40

Roloc™ Systems

Roloc™ D/F Discs

3M™ Roloc™ D/F Discs 361F

• Aluminum oxide mineral coated on a YF wt.

cloth backing.

• For general purpose grinding, blending and

finishing on all metals.

• D/F construction provides cool running, dust control.

• Quick change Roloc™ attachment.

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051141-28042-4 2" x 4 holes 36 25,000 50/200

051141-28046-2 2" x 4 holes 60 25,000 50/200

051141-28050-9 2" x 4 holes 80 25,000 50/200

051141-28053-0 2" x 4 holes 120 25,000 50/200

051141-28044-8 3" x 6 holes 36 20,000 50/200

051141-28048-6 3" x 6 holes 60 20,000 50/200

051141-28052-3 3" x 6 holes 80 20,000 50/200

051141-28056-1 3" x 6 holes 120 20,000 50/200

Roloc TSM (Metal Button)

051141-28041-7 2" x 4 holes 36 25,000 50/200

051141-28045-5 2" x 4 holes 60 25,000 50/200

051141-28049-3 2" x 4 holes 80 25,000 50/200

051141-28054-7 2" x 4 holes 120 25,000 50/200

051141-28043-1 3" x 6 holes 36 20,000 50/200

051141-28047-9 3" x 6 holes 60 20,000 50/200

051141-28051-6 3" x 6 holes 80 20,000 50/200

051141-28055-4 3" x 6 holes 120 20,000 50/200

3M™ Roloc™ D/F Discs 777F

• 3M ceramic abrasive grain on YF wt. polyester

cloth backing.

• Fast cutting, long lasting disc for grinding,

blending and finishing all types of metal.

• D/F construction for dust control and cool running.

• Quick change Roloc™ attachment.

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051141-28058-5 2" x 4 holes 36 25,000 50/200

051141-28062-2 2" x 4 holes 60 25,000 50/200

051141-28066-0 2" x 4 holes 80 25,000 50/200

051141-28070-7 2" x 4 holes 120 25,000 50/200

051141-28060-8 3" x 6 holes 36 20,000 50/200

051141-28064-6 3" x 6 holes 60 20,000 50/200

051141-28068-4 3" x 6 holes 80 20,000 50/200

051141-28072-1 3" x 6 holes 120 20,000 50/200

Roloc TSM (Metal Button)

051141-28057-8 2" x 4 holes 36 25,000 50/200

051141-28061-5 2" x 4 holes 60 25,000 50/200

051141-28065-3 2" x 4 holes 80 25,000 50/200

051141-28069-1 2" x 4 holes 120 25,000 50/200

051141-28059-2 3" x 6 holes 36 20,000 50/200

051141-28063-9 3" x 6 holes 60 20,000 50/200

051141-28067-7 3" x 6 holes 80 20,000 50/200

051141-28071-4 3" x 6 holes 120 20,000 50/200

3M™ Cubitron™ II Roloc™ Durable

Edge D/F Discs 984F

• 3M precision shaped ceramic grain

on a reinforced cloth backing.

• Designed for heavy-duty metalworking applications

such as weld grinding, beveling and flame-out edge clean-up.

• Super-fast cut, long life on stainless steel and carbon steel.

• D/F construction for dust control.

• Convenient quick change Roloc™ attachment.

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

051141-28073-8 2" x 4 holes 36+ 25,000 50/200

051141-28077-6 2" x 4 holes 60+ 25,000 50/200

051141-28080-6 2" x 4 holes 80+ 25,000 50/200

051141-28076-9 3" x 6 holes 36+ 20,000 50/200

051141-28084-4 3" x 6 holes 60+ 20,000 50/200

051141-28082-0 3" x 6 holes 80+ 20,000 50/200

Roloc TSM (Metal Button)

051141-28074-5 2" x 4 holes 36+ 25,000 50/200

051141-28078-3 2" x 4 holes 60+ 25,000 50/200

051141-28079-0 2" x 4 holes 80+ 25,000 50/200

051141-28075-2 3" x 6 holes 36+ 20,000 50/200

051141-28083-7 3" x 6 holes 60+ 20,000 50/200

051141-28081-3 3" x 6 holes 80+ 20,000 50/200

Scotch-Brite™ Roloc™ SC

Surface Conditioning D/F Discs

• Non-woven abrasive product used for cleaning,

finishing, blending and deburring applications

• Threaded attachment system secures the

disc to the holder

UPC Diameter Grade Max. RPM Min./Case

Roloc TR (Plastic Button)

048011-64674-9 2" x 4 holes A VFN 25,000 50/200

048011-64675-6 2" x 4 holes A MED 25,000 50/200

048011-64676-3 2" x 4 holes A CRS 25,000 50/200

048011-64679-4 3" x 6 holes A VFN 18,000 25/100

048011-64678-7 3" x 6 holes A MED 18,000 25/100

048011-64677-0 3" x 6 holes A CRS 18,000 25/100

Roloc TSM (Metal Button)

048011-64683-1 2" x 4 holes A CRS 25,000 50/200

3M™ Roloc™ Dust Shroud Kits

• Use with 0.3 HP and 0.5 HP

3M™ Disc Sanders (12,000 RPM)

• Considered to be an “engineered control”

when used with approved vacuum systems

UPC Size Qty./Case

051141-28727-0 2" 1

051141-28728-7 3" 1

Roloc™ Systems

3M™ Roloc™ Disc Packs

3M™ Roloc™ Disc Intro Pack 984S

• Contains the following assortment of 3M’s top selling Roloc™ Discs:

– 3M™ Cubitron™ II Roloc™ Durable Edge Disc 984F

(3 of each grade: 36+, 60+, 80+)

– Scotch-Brite™ Roloc™ SC Surface Conditioning Disc

(2 of each grade: A VFN, A MED, A CRS)

– Scotch-Brite™ Roloc™ Light Grinding and Blending Disc

(2 of each grade: SD A CRS)

• Contains 1 each of the following:

– 3M™ Roloc™ Disc Pad TR (Extra Hard)

– 3M™ Spacer (PN28636)

UPC Part No. Size Min./Case

051141-28039-4 984S 4" 5 packs/case

3M™ Roloc™ Disc Intro Pack 9815S, 982S and 983S

• Contains the following assortment of 3M’s top selling Roloc™ Discs:

– 3M™ Cubitron™ II Roloc™ Durable Edge Disc 984F

(3 of each grade: 36+, 60+, 80+)

– Scotch-Brite™ Roloc™ SC Surface Conditioning Disc

(2 of each grade: A VFN, A MED, A CRS)

– Scotch-Brite™ Roloc™ Light Grinding and Blending Disc

(2 of each grade: SD ACRS)

• Contains 1 each of the following:

– 3M™ Roloc™ Disc Pad TR (Hard)

– 3M™ Roloc™ Shank

UPC Part No. Size Min./Case

051144-82901-9 9815S 1-1/2" 5 packs/case

051144-82899-9 982S 2" 5 packs/case

051144-82900-2 983S 3" 5 packs/case

3M™ Roloc™ Disc Intro Pack 985S

• Contains the following assortment of 3M’s top selling Roloc™ Discs:

– 2" Scotch-Brite™ Roloc™ SC Surface Conditioning Disc

(2 of each grade: A VFN, A MED, A CRS)

– 3" Scotch-Brite™ Roloc™ SC Surface Conditioning Disc

(2 of each grade: A VFN, A MED, A CRS)

– 2" Scotch-Brite™ Roloc™ Light Grinding and Blending Disc

(2 of each grade: SD ACRS)

– 3" Scotch-Brite™ Roloc™ Light Grinding and Blending Disc

(2 of each grade: SD ACRS)

• Contains 1 each of the following:

– 3M™ Roloc™ Disc Pad 2" and 3" (Hard)

– 3M™ Roloc™ Shank

UPC Part No. Size Min./Case

048011-18254-4 985S 2" and 3" 5 packs/case

3M™ Roloc™ Bristle

Disc Pack 983BS

• Contains a variety of grades of

3M™ Roloc™ Bristle Discs

3" diameter x 5/8" trim

• Includes a disc pad holder

UPC Size Min./Case

048011-18697-9 3" 1/5

3M™ Disc Sanders

• Versatile, durable, comfortable and powerful

• Features 3M™ Gripping Material

• 97° head for decreased wrist strain

• Use with 3M™ and Scotch-Brite™ Abrasive

Discs and Disc Accessories

• For a variety of metalworking applications

Model No.

Tool Dia.

Inch (mm)

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Air Inlet

Thread

Airflow Rate

SCFM (LPM)

Exhaust

Direction UPC

28328 2 (51) 0.3 (224) 12,000 1.09 (.49) 5.91 (150.2) 2.5 (63.5) 1/4" NPT 17 (481) Rear Directional 051141-28328-9

28329 2 (51) 0.5 (372) 12,000 1.28 (.58) 6.75 (171.5) 2.75 (69.9) 1/4" NPT 26 (736) Rear Directional 051141-28329-6

28341 2 (51) 0.3 (224) 20,000 1.09 (.49) 5.91 (150.2) 2.5 (63.5) 1/4" NPT 17 (481) Rear Directional 051141-28341-8

20231 2 (51) 0.5 (372) 20,000 1.28 (.58) 6.75 (171.5) 2.75 (69.9) 1/4" NPT 26 (736) Rear Directional 051141-20231-0

20232 3 (76) 1 (744) 15,000 1.97 (.89) 8.25 (209.6) 3.25 (82.6) 1/4" NPT 37 (1,048) Rear Directional 051141-20232-7

28408 4–5 (100–127) 1 (744) 12,000 2.31 (1.05) 8.25 (209.6) 4.23 (107.4) 3/8" NPT* 37 (1,048) Rear 051141-28408-8

28622 4–5 (100–127) 1 (744) 12,000 4.03 (1.83) 11.5 (292) 4.70 (119) 3/8" NPT* 37 (1,048) — 051141-28622-8

*Includes 3/8" to 1/4" reducer

Roloc™ Systems

3M™ Power Tools for Roloc™ Discs

3M™ Pistol Grip Rotary Disc Sander

• Designed for light duty applications

Model No. Description

Tool Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Airflow Rate

SCFM (LPM)

Thread

Size UPC

28547 Rotary 3 (76) 0.45 (336) 15,000 1.79 (0.81) 4.8 (122) 5.35 (136) 23 (651) 1/4–20 EXT 051141-28547-4

28547

3M™ Mini-Random Orbital Sander

• Lightweight sander for use with the 3M™ Trizact™ Finesse-it™ Paint Repair System

• Unique one-piece shaft balancer system supports the low profile design and improved control

Model No.

Tool Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Orbit Dia.

Inch (mm)

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Airflow Rate

SCFM (LPM)

Pad

Included UPC

20244 1-1/4 x 3/16 .27 (201) 8,000 3/16 (5) 1.10 (.498) 4.72 (120) 3.32 (84.5) 15 (425) Roloc™ 02345

w/Stikit™ Face 051141-20244-0

20244

3M™ Elite Series Mini Orbital Sander

• Designed for sanding nibs or defects on the clearcoat, used with 3M™ Trizact™ Finesse-it™ Film Disc 466LA

• 3M™ Gripping Material for added comfort and reduced vibration

• Provides optimal uniform sanding scratches with a superior finish

Model No.

Tool Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Orbit Dia.

Inch (mm)

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Airflow Rate

SCFM (LPM)

Pad

Included UPC

28737 1-1/4 x 3/16 0.48 (357) 8,000 1/8 (3.2) 1.33 (0.6) 7.6 (193) 4.1 (103) 23 (651) Roloc™ 02345

w/Stikit™ Face 051141-28737-9

28737

28328/28341 28329/20231

20232 28622

28408

3M™ Pistol Grip Random Orbital Disc Sander

• Powerful, lightweight tool with excellent balance

• Durable composite body for ergonomic feel

• Pistol grip design allows you to sand in hard-to-reach areas

Model No.

Tool Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Orbit Dia.

Inch (mm)

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Airflow Rate

SCFM (LPM)

Thread

Size UPC

38353 3 (76) 0.45 (336) 15,000 1/8 (3.2) 1.8 (0.8) 5 (122) 5 (136) 22 (623) 5/16–24 EXT 051141-28353-1

28353

Roloc™ Systems

Accessories for Roloc™ Systems

Product Name UPC Qty./Case For Use With Size/Description Max RPM

3M™ Roloc™ TR Disc Pads 051144-45101-2 5

3M™ Roloc™ TR Discs

1" Diameter; Medium; 1/4–20 INT 30,000

051144-45099-2 5 1-1/2" Diameter; Medium; 1/4–20 INT 30,000

051144-45100-5 5 1-1/2" Diameter; Hard; 1/4–20 INT 30,000

051144-45095-4 5 2" Diameter; Medium; 1/4–20 INT 25,000

051144-45096-1 5 2" Diameter; Hard; 1/4–20 INT 25,000

051144-45097-8 5 2" Diameter; Extra Hard; 1/4–20 INT 25,000

051144-45092-3 5 3" Diameter; Medium; 1/4–20 INT 18,000

051144-45091-6 5 3" Diameter; Hard; 1/4–20 INT 20,000

051144-45093-0 5 3" Diameter; Extra Hard; 1/4–20 INT 20,000

051144-45179-1 5 4" Diameter; Medium; 1/4–20 INT 12,000

051141-28474-3 5 4" Diameter; Hard; 3/8–24 INT 12,000

051141-28475-0 5 4" Diameter; Extra Hard; 3/8–24 INT 12,000

051144-83242-2 5 4" Diameter; Medium; 5/8–11 INT 12,000

051144-83489-1 5 4" Diameter; Hard; 5/8–11 INT 12,000

051144-83980-3 5 4" Diameter; Extra Hard; 5/8–11 INT 12,000

3M™ Roloc™ Cool

Running Disc Pads 051144-82974-3 5

3M™ Roloc™ TR Discs

2" Diameter; Medium; 1/4–20 INT 20,000

051141-28711-9 5 2" Diameter; Hard; 1/4–20 INT 20,000

051144-82975-0 5 3" Diameter; Medium; 1/4–20 INT 12,000

051141-28710-2 5 3" Diameter; Hard; 1/4–20 INT 12,000

051111-56479-0 5 4" Diameter; Hard; 3/8–24 INT 15,000

051141-28473-6 5 4" Diameter; Hard; 5/8–11 INT 15,000

3M™ Roloc™ TS

or TSM Disc Pads 051144-77729-7 5

3M™ Roloc™ TSM Discs and

“screw on” abrasive discs

1-1/2" Diameter; Medium; 1/4–20 INT 30,000

051144-77728-0 5 1-1/2" Diameter; Hard; 1/4–20 INT 30,000

051144-14211-8 5 2" Diameter; Medium; 1/4–20 INT 25,000

051144-14212-5 5 2" Diameter; Hard; 1/4–20 INT 25,000

051144-14215-6 5 3" Diameter; Medium; 1/4–20 INT 18,000

051144-14216-3 5 3" Diameter; Hard; 1/4–20 INT 20,000

051144-28578-8 5 4” Diameter; Hard; 5/8–11 INT 12,000

051144-28579-5 5 4” Diameter; Extra Hard; 5/8–11 INT 12,000

3M™ Roloc™ TP Disc Pads 051144-14201-9 5 3M™ Roloc™ TP Discs 3"; Medium; 1/4–20 INT 18,000

051144-14202-6 5 3M™ Roloc™ TP Discs 3"; Hard; 1/4–20 INT 20,000

Roloc™ Systems

Product Name UPC Qty./Case For Use With Size/Description Max RPM

1/4" Threaded Shaft

051144-45102-9 10/50 3M™ Roloc™ Disc Pads

with 1/4–20 INT 1/4" x 1/4–20 Thread N/A

3M™ Roloc™ + Holder

048011-15408-4 5

3M™ Roloc™ Unitized Wheels,

Roloc™+ Products, Brush

and Disc Accessories

1" Diameter x

1/4" Shaft Diameter 25,000

3M™ Roloc™ Dust

Shroud Kits 051141-28727-0 1

3M™ Disc Sanders

(0.3 HP and 0.5 HP);

3M™ Roloc™ D/F Discs

(2" and 3")

2" 12,000

051141-28728-7 1 3" 12,000

3M™ Vacuum Hose Anti-Static

051141-28730-0 1 Used to connect Random Orbital and

Orbital Sanders to a vacuum system

1" ID x 4 ft. Length,

1" EXT Hose Thread N/A

3M™ Overhose Kit

051141-28651-8 1 0.3 HP Die Grinders

Kit Contains:

Air Line Extension (PN 20209),

Adapter (PN 20453), Over Hose

Cloth Sleeve, Exhaust Spacer,

Air Inlet Bushing, Instruction Sheet

N/A

Accessories for Roloc™ Systems

Random

Orbital Systems

Random Orbital Systems

3M™ and Scotch-Brite™ Disc Selection Guide

Product Anti-Loading Backing Performance

Application Metal Type

Blending Finishing

Stainless

Steel Aluminum

Carbon

Steel Titanium

Nickel

Alloy

Non-Ferrous

(Brass Bronze)

NX Yes C & D wt. Paper Good

341D — X wt. Cloth Good

236U Yes C wt. Paper Better

426U Yes A wt. Paper Better

363I — F wt. Paper Bet ter

202DZ — J wt. Cloth Better

348D — X wt. Cloth Better

735U Yes C wt. Paper Best

763U — F wt. Paper Best

777F — Y wt. Cloth Best

900DZ — J wt. Cloth Best

Scotch-Brite™

RO — Nylon Best

3M™ Abrasive Discs for Random Orbital Sanding

3M™ Stikit™ and PSA Discs are designed to handle a wide range of sanding and finishing needs. These discs have a pressure

sensitive adhesive coating on the back side for easy application and clean removal.

Scotch-Brite™ Random Orbital (RO) Discs are engineered to give you a faster-cutting, longer-lasting and more consistent

alternative to paper and cloth-back coated abrasives on applications like prepping bare metal for painting. These innovative

discs are constructed especially for random orbital sanders, using a non-woven nylon web embedded with premium ceramic

grain. The result is a longer-lasting disc that offers a quicker initial cut than most coated abrasives designed for random orbital

sanders — plus a more consistent finish from beginning to end.

Random Orbital Systems

Scotch-Brite™ Discs — Hook-and-Loop

Scotch-Brite™ Pads

Scotch-Brite™ Discs

7447 PRO

The fast, consistent performance

of Scotch-Brite™ 7447 PRO can

help reduce surface prep time on

a variety of applications including:

• Paint and primer preparation on airplanes,

cars, trucks and other motor vehicles

• Scuff sanding of sealer coatings on cabinetry and furniture

• Refine finishes on stainless steel appliances,

food processing, pharmaceutical and surgical equipment

UPC Size Grade Color Min./Case

Discs

048011-64959-7 5" Dia. A VFN Maroon 100

048011-64960-3 6" Dia. A VFN Maroon 100

Jitterbug Sheet Pad

048011-64958-0 3-2/3" x 9-1/4" A VFN Maroon 100

Scotch-Brite™ RO Discs

• Premium ceramic grain abrasive

discs designed especially for random

orbital sanders

• Fast cut rate — less pressure required

• Extremely long life for fewer disc changes

• Ideal for prepping bare metal for paint

• Use with 3M™ Hookit™ Low Profile

Disc Pads (PNs 20352 and 20355)

UPC Diameter Grade Color Min./Case

048011-64694-7 5" FIN Green 100

048011-64693-0 5" MED Maroon 100

048011-64756-2 5" CRS Brown 100

048011-64795-4 6" FIN Green 100

048011-64796-1 6" MED Maroon 100

048011-64757-9 6" CRS Brown 100

* Available in dust-free configuration

3M™ NX Disc

• Aluminum oxide on a D wt. paper backing

• Load resistant coating

• Excellent for sanding on whitewood,

primer, paint sealers and topcoats

UPC Diameter Grade Min./Case

Paper Backing with Tabbed Liner

051141-31211-8 5" x NH 40 50/250

051141-31212-5 5" x NH P60 50/250

051141-31219-4 6" x NH 40 50/250

051141-31220-0 6" x NH P60 50/250

3M™ NX Disc Roll

• Aluminum oxide on a C wt.

(P100–P400) or D wt.

(40, P60, P80) paper backing

• Load resistant coating

• Excellent for sanding on whitewood,

primer, paint sealers and topcoats

UPC Diameter Grade Min./Case

Paper Backing

051141-31181-4 5" x NH P80 100/4

051141-31182-1 5" x NH P100 100/4

051141-31183-8 5" x NH P120 100/4

051141-31184-5 5" x NH P150 100/4

051141-31185-2 5" x NH P180 100/4

051141-31186-9 5" x NH P220 100/4

051141-27672-4 5" x NH P240 100/4

051141-27674-8 5" x NH P320 100/4

051141-27676-2 5" x NH P400 100/4

051141-31189-0 6" x NH P80 100/4

051141-31190-6 6" x NH P100 100/4

051141-31191-3 6" x NH P120 100/4

051141-31192-0 6" x NH P150 100/4

051141-31193-7 6" x NH P180 100/4

051141-31194-4 6" x NH P220 100/4

051141-27673-1 6" x NH P240 100/4

051141-27675-5 6" x NH P320 100/4

051141-27677-9 6" x NH P400 100/4

Random Orbital Systems

3M™ Stikit™ Discs

3M™ Stikit™ Disc Roll 236U

• Premium aluminum oxide

on a C wt. paper backing

• Discs for paint, primer, wood,

metal, plastic and fiberglass

• Strong paper backing provides

durability and increased cut rate

• Open coat minimizes loading

• Load resistant coating

UPC Diameter Grade Discs/Roll Qty./Case

Paper Backing

051141-55540-9 5" P80 100 4

051141-55541-6 5" P100 100 4

051141-55542-3 5" P120 100 4

051141-55543-0 5" P150 100 4

051141-55544-7 5" P180 100 4

051141-55545-4 5" P220 100 4

051141-55546-1 5" P240 100 4

051141-55547-8 5" P320 100 4

051141-55548-5 5" P400 100 4

051141-55549-2 5" P500 100 4

051141-55560-7 6" P80 100 4

051141-55561-4 6" P100 100 4

051141-55562-1 6" P120 100 4

051141-55563-8 6" P150 100 4

051141-55564-5 6" P180 100 4

051141-55565-2 6" P220 100 4

051141-55566-9 6" P240 100 4

051141-55567-6 6" P320 100 4

051141-55568-3 6" P400 100 4

051141-55569-0 6" P500 100 4

3M™ Stikit™ Disc 202DZ

• Aluminum oxide on a durable

J wt. cloth backing

• Excellent for use on aluminum

and brass

• Open coat resists loading

• Individual discs with liners

UPC Diameter Grade Min./Case

Paper Backing

051111-50450-5 5" 80 50/250

051111-50451-2 5" P100 50/250

051111-50452-9 5" P120 50/250

051111-50453-6 5" P150 50/250

051111-50454-3 5" P180 50/250

051111-50455-0 5" P220 50/250

051111-50459-8 6" 80 50/250

051111-50460-4 6" P100 50/250

051111-50461-1 6" P120 50/250

051111-50462-8 6" P150 50/250

051111-50463-5†6" P180 50/250

051111-50464-2 6" P220 50/250

† Made-to-Order

Random Orbital Systems

3M™ Stikit™ Discs

3M™ Stikit™ Disc Roll 341D

• Aluminum oxide on a durable

X wt. cloth backing

• Resin bonded for heat resistance

UPC Diameter Grade Discs/Roll Qty./Case

Paper Backing

051144-21752-6 5" X NH 50 100 4

051144-21751-9 5" X NH 60 100 4

051144-21750-2 5" X NH 80 100 4

051144-21749-6 5" X NH P100 100 4

051144-21748-9 5" X NH P120 100 4

051144-21746-5 5" X NH P180 100 4

051144-21762-5 6" X NH 60 100 4

051144-21761-8 6" X NH 80 100 4

3M™ Stikit™ Disc Roll 363I

• Aluminum oxide on an extra heavy

F wt. paper backing

• Resin bonded for heat resistance

UPC Diameter Grade Discs/Roll Qty./Case

Paper Backing

051144-21800-4 5" x NH 60 100 4

051144-21799-1 5" x NH 80 100 4

051144-21798-4 5" x NH P100 100 4

051144-21797-7 5" x NH P120 100 4

051144-21796-0 5" x NH P150 100 4

051144-21795-3 5" x NH P180 100 4

051144-21794-6 6" x NH 60 100 4

051144-21793-9 6" x NH 80 100 4

051144-21792-2 6" x NH P100 100 4

051144-21791-5 6" x NH P120 100 4

051144-21790-8 6" x NH P150 100 4

051144-21789-2 6" x NH P180 100 4

3M™ Stikit™ Film

Disc Roll 375L

• Durable film construction provides

tear resistant properties

• Premium abrasive and load resistant

coating provide fast cut and long life

• Flexible, smooth film backing conforms to contours and rounded edges

• Produces a uniform and consistent finish because of the flatness of

the film backing

UPC Diameter Grade Min./Case

051115-66793-0 5" x NH P80 100/4

051115-66794-7 5" x NH P100 100/4

051115-66795-4 5" x NH P120 100/4

051115-66796-1 5" x NH P150 100/4

051115-66797-8 5" x NH P180 100/4

051115-66798-5 5" x NH P220 100/4

051115-66799-2 5" x NH P240 100/4

051115-66800-5 5" x NH P280 100/4

051115-66801-2 5" x NH P320 100/4

051115-66802-9 5" x NH P400 100/4

051115-66803-6 6" x NH P80 100/4

051115-66804-3 6" x NH P100 100/4

051115-66805-0 6" x NH P120 100/4

051115-66806-7 6" x NH P150 100/4

051115-66807-4 6" x NH P180 100/4

051115-66808-1 6" x NH P220 100/4

051115-66809-8 6" x NH P240 100/4

051115-66810-4 6" x NH P280 100/4

051115-66811-1 6" x NH P320 100/4

051115-66812-8 6" x NH P400 100/4

3M™ Disc Finish and Life — comparing grade 180

Best Finish (fewest swirl marks) Longest Life (related to mineral dulling)

426U 900DZ

NX 777F

236U Scotch-Brite™ RO

375L 341D

363I 202DZ

735U 763U

Scotch-Brite™ RO 735U

763U 363I

202DZ 375L

341D 236U

900DZ NX

426U

Coarsest Finish Least Life

Tech Tip

3M™ Stikit™ Disc Roll 426U

• Silicon carbide abrasive on a

flexible A wt. paper backing

• Features a load resistant coating

• Delivers good cut and excellent finish

UPC Diameter Grade Discs/Roll Qty./Case

051141-27775-2 5" x NH 80 125 10

051141-27776-9 5" x NH 100 125 10

051141-27777-6 5" x NH 120 125 10

051141-27778-3 5" x NH 150 175 6

051141-27779-0 5" x NH 180 175 6

051141-27780-6 5" x NH 220 175 6

051141-27781-3 5" x NH 240 175 6

051141-27782-0 5" x NH 280 175 6

051141-27783-7 5" x NH 320 175 6

051141-27784-4 5" x NH 400 175 6

051141-27785-1 6" x NH 80 125 10

051141-27786-8 6" x NH 100 125 10

051141-27787-5 6" x NH 120 125 10

051141-27788-2 6" x NH 150 175 6

051141-27789-9 6" x NH 180 175 6

051141-27790-5 6" x NH 220 175 6

051141-27791-2 6" x NH 240 175 6

051141-27792-9 6" x NH 320 175 6

3M™ Stikit™

Disc Roll 763U

• 3M ceramic aluminum oxide

blend abrasive grain on a heavy

F wt. paper backing

UPC Diameter Grade Discs/Roll Qty./Case

Paper Backing

051144-80942-4 5" x NH 60 100 4

051144-80943-1 5" x NH 80 100 4

051144-80944-8 5" x NH P100 100 4

051144-80945-5 5" x NH P120 100 4

051144-80946-2 6" x NH 60 100 4

051144-80947-9 6" x NH 80 100 4

3M™ Stikit™ Disc 900DZ

• High performance 3M ceramic

abrasive grain on a J wt. backing

• Open coat to reduce loading

• Individual discs with liner

UPC Diameter Grade Min./Case

Paper Backing

051111-49639-8 5" x NH 80 50/250

051111-49640-4 5" x NH P100 50/250

051111-49641-1 5" x NH P120 50/250

051111-49643-5 5" x NH P150 50/250

051111-49642-8 5" x NH P180 50/250

051111-49644-2 5" x NH P220 50/250

3M™ Stikit™ Disc/

Disc Roll 735U

• 3M ceramic aluminum oxide blend

abrasive grain on a C wt. paper

• Load-resistant coating

• Sharp-cutting and durable

• Ideal for wood, soft metals, fiberglass and solid surface

UPC Diameter Grade Discs/Roll Qty./Case

Disc Rolls

051111-51229-6 5" x NH P80 100 4

051111-51230-2 5" x NH P100 100 4

051111-51231-9 5" x NH P120 100 4

051111-51232-6 5" x NH P150 100 4

051111-51233-3 5" x NH P180 100 4

051111-51234-0 5" x NH P220 100 4

Paper Backing with Tabbed Liner

051141-20760-5 5" x NH P80 50 5

051141-20762-9 5" x NH P100 50 5

051141-20764-3 5" x NH P120 50 5

051141-20766-7 5" x NH P150 50 5

051141-20768-1 5" x NH P180 50 5

051141-20770-4 5" x NH P220 50 5

051141-24042-8 6" x NH P80 50 5

051141-24043-5 6" x NH P100 50 5

051141-24044-2 6" x NH P120 50 5

051141-24045-9 6" x NH P150 50 5

051141-24046-6 6" x NH P180 50 5

051141-24047-3 6" x NH P220 50 5

Random Orbital Systems

3M™ Stikit™ Discs

Random Orbital Systems

3M™ PSA Discs

3M™ PSA Cloth Disc 348D

• Aluminum oxide on an X wt. cloth backing

• Heavy-duty, cloth-backed discs for more

aggressive applications

• Provides excellent adhesion while removing easily

UPC Diameter Grade Min./Case

Cloth Backing

051144-20913-2 2" 36 50/200

051144-20911-8 2" 50 50/200

051144-20910-1 2" 60 50/200

051144-20909-5 2" 80 50/200

051144-20908-8 2" P100 50/200

051144-20907-1 2" P120 50/200

051144-01335-7 3" 40 50/200

051144-01334-0 3" 50 50/200

051144-01333-3 3" 60 50/200

051144-01332-6 3" 80 50/200

051144-01331-9 3" P100 50/200

051144-01330-2 3" P120 50/200

051144-20891-3 5" 36 50/250

051144-20890-6 5" 40 50/250

051144-20889-0 5" 50 50/250

051144-20888-3 5" 60 50/250

051144-20887-6 5" 80 50/250

051144-20886-9 5" P100 50/250

051144-20885-2 5" P120 50/250

051144-20884-5 5" P150 50/250

051144-20883-8 5" P180 50/250

051144-20881-4 5" P240 50/250

051144-21639-0 6" 36 50/250

051144-21731-1 6" 40 50/250

051144-20879-1 6" 50 50/250

051144-20878-4 6" 60 50/250

051144-20877-7 6" 80 50/250

051144-20876-0 6" P100 50/250

051144-21497-6 6" P120 50/250

051144-20874-6 8" 36 50/250

051144-20873-9 8" 40 50/250

051144-20871-5 8" 60 50/250

051144-20870-8 8" 80 50/250

051144-20868-5 8" P120 50/250

3M™ PSA Cloth Disc 348D (cont.)

UPC Diameter Grade Min./Case

051144-88906-8 12" 36 10

051144-88905-1 12" 40 10

051144-88904-4 12" 50 10

051144-88903-7 12" 60 10

051144-88902-0 12" 80 10

051144-88901-3 12" P100 10

051144-88890-0 16" 36 10

051144-88889-4 16" 40 10

051144-88887-0 16" 60 10

051144-88886-3 16" 80 10

051144-88882-5 18" 36 10

051144-88880-1 18" 60 10

051144-88878-8 20" 36 10

051144-88877-1 20" 40 10

051144-88876-4 20" 50 10

051144-88875-7 20" 60 10

051144-88874-0 20" 80 10

051144-20802-9 24" 36 10

051144-20801-2 24" 40 10

051144-20798-5 24" 80 10

3M™ PSA Disc 777F

• 3M ceramic aluminum oxide blend

abrasive grain on a polyester cloth backing

• Heavy-duty YF wt. backing provides

great strength and flexibility

• Provides long life and fast cut on multiple surfaces

• Includes a grinding aid for cooler running

UPC Diameter Grade Qty./Case

Cloth Backing

051144-88869-6 12" 36 10

051144-88873-3 12" 40 10

051144-88872-6 12" 50 10

051144-88871-9 12" 60 10

051144-88870-2 12" 80 10

Random Orbital Systems

3M™ Power Tools for Random Orbital Systems

3M™ Elite Non-Vacuum Random Orbital Sanders

• Powerful and popular non-vacuum tools meet or exceed highest performance standards

Model No.

Tool Dia.

Inch (mm)

Orbit Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Airflow Rate

SCFM (LPM)

Pad

Included UPC

28494 3 (77) 3/16 (5) 0.28 (209) 12,000 1.52 (.692) 5.78 (147) 3.64 (92.5) 17 (481) Hookit™ 20350 051141-28494-1

28496 3 (77) 3/32 (2.5) 0.28 (209) 12,000 1.31 (.596) 5.78 (147) 3.38 (86) 17 (481) Hookit™ 20350 051141-28496-5

28583 5 (127) 3/8 (9.5) 0.28 (209) 12,000 1.81 (.825) 6.77 (172) 3.58 (91) 17 (481) Stikit™ 20351 051141-28583-2

28495 5 (127) 5/16 (8) 0.28 (209) 12,000 1.8 (.817) 6.77 (172) 3.58 (91) 17 (481) Stikit™ 20351 051141-28495-8

28497 5 (127) 3/16 (5) 0.28 (209) 12,000 1.76 (.8) 6.77 (172) 3.58 (91) 17 (481) Stikit™ 20351 051141-28497-2

28708 5 (127) 3/16 (5) 0.28 (209) 12,000 1.76 (.8) 6.77 (172) 3.58 (91) 17 (481) Hookit™ 20352 051141-28708-9

28498 5 (127) 3/32 (2.5) 0.28 (209) 12,000 1.72 (.781) 6.77 (172) 3.58 (91) 17 (481) Stikit™ 20351 051141-28498-9

28582 6 (152) 3/8 (9.5) 0.28 (209) 12,000 1.94 (.881) 7.36 (187) 3.58 (91) 17 (481) Stikit™ 20354 051141-28582-5

28499 6 (152) 5/16 (8) 0.28 (209) 12,000 1.91 (.869) 7.36 (187) 3.58 (91) 17 (481) Stikit™ 20354 051141-28499-6

28500 6 (152) 3/16 (5) 0.28 (209) 12,000 1.86 (.844) 7.36 (187) 3.58 (91) 17 (481) Stikit™ 20354 051141-28500-9

28501 6 (152) 3/32 (2.5) 0.28 (209) 12,000 2.1 (.957) 7.36 (187) 3.58 (91) 17 (481) Stikit™ 20354 051141-28501-6

28582/28499/28500/2850128494/28496 28583/28495/28497/28708/28498

3M™ Random Orbital Series — Elite Series

1 Aluminum housing for added durability and reduced vibration;

Durable composite cover helps prevent cracked housings

2 Recessed Lever eliminates pinch points

3 Extended cover with 3M™ Gripping Material

allows better control with reduced effort,

insulates from cold and reduces vibration

4 Safer Thumb Wheel mounted speed

control reduces inadvertent speed changes

5 Wider port for more efﬁcient dust capture

6 Internal Mufﬂer results in less breakage,

SGV 6 dB quieter

7 Integrated Wrist Support for comfort

and leverage

8 Clearance for large inlet coupler

9 Center Mount Exhaust for more ﬁnger room,

better dust collection airﬂow

Upgrades from Original Series — Improved durability, ergonomics and noise level

678

Red Text = Proprietary 3M design feature

3M™ Non-Vacuum Random Orbital Sanders

Model No.

Tool Dia.

Inch (mm)

Orbit Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Airflow Rate

SCFM (LPM)

Pad

Included UPC

20317 5 (127) 3/16 (5) 0.28 (209) 12,000 1.65 (.75) 5.89 (149.6) 3.26 (82.9) 17 (481) Stikit™ 20351 051141-20317-1

20324 6 (152) 5/16 (8) 0.28 (209) 12,000 1.78 (.81) 6.39 (162.3) 3.26 (82.9) 17 (481) Stikit™ 20354 051141-20324-9

20325 6 (152) 3/16 (5) 0.28 (209) 12,000 1.74 (.79) 6.39 (162.3) 3.26 (82.9) 17 (481) Stikit™ 20354 051141-20325-6

20324/2032520317

3M™ Self-Generated Vacuum Random Orbital Sanders*

Model No.

Tool Dia.

Inch (mm)

Orbit Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Airflow Rate

SCFM (LPM)

Pad

Included UPC

20252†3 (77) 3/16 (5) 0.28 (209) 12,000 1.30 (.59) 5.01 (127.33) 3.10 (78.61) 17 (481) Hookit™ 20350 051141-20252-5

20319 5 (127) 3/16 (5) 0.28 (209) 12,000 1.83 (.83) 6.12 (155.4) 3.33 (84.5) 17 (481) Hookit™ 20353 051141-20319-5

20208 6 (150) 5/16 (8) 0.28 (209) 12,000 1.96 (.89) 6.47 (164.4) 3.33 (84.5) 17 (481) Hookit™ 20356 051141-20208-2

20327 6 (150) 3/16 (5) 0.28 (209) 12,000 1.96 (.89) 6.47 (164.4) 3.33 (84.5) 17 (481) Hookit™ 20356 051141-20327-0

*One (1) each of the following included: 3M™ Clean Sanding Filter Bag, Filter Bag Adapter, Hose Seal

†Product to be replaced by Elite Series model.

20208/203272031920252

3M™ Power Tools for Random Orbital Systems

Random Orbital Systems

3M™ Elite Central-Vacuum-Ready Random Orbital Sanders

• Easily attaches to your existing central vacuum system for efficient dust-evacuation

Model No.

Tool Dia.

Inch (mm)

Orbit Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Airflow Rate

SCFM (LPM)

Pad

Included UPC

28503 3 (77) 3/16 (5) 0.28 (209) 12,000 1.63 (.742) 7.99 (203) 3.64 (92.5) 17 (481) Hookit™ 20350 051141-28503-0

28505 3 (77) 3/32 (2.5) 0.28 (209) 12,000 1.41 (.644) 7.91 (201) 3.44 (87.5) 17 (481) Hookit™ 20350 051141-28505-4

28561 5 (127) 3/8 (9.5) 0.28 (209) 12,000 1.91 (.868) 8.93 (227) 3.64 (92.6) 17 (481) Hookit™ 20353 051141-28561-0

28504 5 (127) 5/16 (8) 0.28 (209) 12,000 1.89 (.86) 8.93 (227) 3.64 (92.6) 17 (481) Hookit™ 20353 051141-28504-7

28506 5 (127) 3/16 (5) 0.28 (209) 12,000 1.86 (.844) 8.93 (227) 3.64 (92.6) 17 (481) Hookit™ 20353 051141-28506-1

28507 5 (127) 3/32 (2.5) 0.28 (209) 12,000 1.82 (.826) 8.93 (227) 3.64 (92.6) 17 (481) Hookit™ 20353 051141-28507-8

28560 6 (152) 3/8 (9.5) 0.28 (209) 12,000 2.04 (.930) 9.37 (238) 3.64 (92.6) 17 (481) Hookit™ 20356 051141-28560-3

28502 6 (152) 5/16 (8) 0.28 (209) 12,000 2.02 (.918) 9.37 (238) 3.64 (92.6) 17 (481) Hookit™ 20356 051141-28502-3

28508 6 (152) 3/16 (5) 0.28 (209) 12,000 1.97 (.896) 9.37 (238) 3.64 (92.6) 17 (481) Hookit™ 20356 051141-28508-5

28509 6 (152) 3/32 (2.5) 0.28 (209) 12,000 1.91 (.869) 9.37 (238) 3.64 (92.6) 17 (481) Hookit™ 20356 051141-28509-2

28560/28502/28508/2850928503/28505 28561/28504/28506/28507

3M™ Elite Self-Generated Vacuum Random Orbital Sanders*

• Featuring 3M patented Clean Sanding system with improved filter bag

Model No.

Tool Dia.

Inch (mm)

Orbit Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Airflow Rate

SCFM (LPM)

Pad

Included UPC

28511 3 (77) 3/16 (5) 0.28 (209) 12,000 1.65 (.752) 8.22 (209) 3.64 (92.5) 17 (481) Hookit™ 20350 051141-28511-5

28513 3 (77) 3/32 (2.5) 0.28 (209) 12,000 1.43 (.651) 8.14 (207) 3.44 (87.5) 17 (481) Hookit™ 20350 051141-28513-9

28563 5 (127) 3/8 (9.5) 0.28 (209) 12,000 1.93 (.874) 9.21 (234) 3.64 (92.6) 17 (481) Hookit™ 20353 051141-28563-4

28512 5 (127) 5/16 (8) 0.28 (209) 12,000 1.9 (.866) 9.21 (234) 3.64 (92.6) 17 (481) Hookit™ 20353 051141-28512-2

28514 5 (127) 3/16 (5) 0.28 (209) 12,000 1.87 (.85) 9.21 (234) 3.64 (92.6) 17 (481) Hookit™ 20353 051141-28514-6

28515 5 (127) 3/32 (2.5) 0.28 (209) 12,000 1.83 (.833) 9.21 (234) 3.64 (92.6) 17 (481) Hookit™ 20353 051141-28515-3

28562 6 (152) 3/8 (9.5) 0.28 (209) 12,000 2.06 (.939) 9.64 (245) 3.64 (92.6) 17 (481) Hookit™ 20356 051141-28562-7

28510 6 (152) 5/16 (8) 0.28 (209) 12,000 2.04 (.927) 9.64 (245) 3.64 (92.6) 17 (481) Hookit™ 20356 051141-28510-8

28516 6 (152) 3/16 (5) 0.28 (209) 12,000 1.99 (.904) 9.64 (245) 3.64 (92.6) 17 (481) Hookit™ 20356 051141-28516-0

28517 6 (152) 3/32 (2.5) 0.28 (209) 12,000 1.92 (.874) 9.64 (245) 3.64 (92.6) 17 (481) Hookit™ 20356 051141-28517-7

*One (1) each of the following included: 3M™ Clean Sanding Filter Bag, Filter Bag Adapter, Hose Seal

28511/28513 28563/28512/28514/28515 28562/28510/28516/28517

3M™ Electric Random Orbital Sander Kits

Kits include 3M™ Electric Sander, 3M™ Power Supply w/AC Power Cord (PN28436),

3M™ Power Cord (PN 28434) and Disc Pad (Non-Vacuum: 3M™ Stikit™ Disc Pad;

Central Vacuum: 3M™ Hookit™ Clean Sanding Disc Pad). Kit includes canvas bag.

Model No. Vacuum

Tool Dia.

Inch (mm)

Orbit Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Pad

Included UPC

28519 Central Vac Kit 5 (127) 3/32 (2.5) .20–.24 (149–179) 10,000 2.08 (.945) 8.42 (214) 3.8 (96.6) Hookit™ 20353 051141-28519-1

28520 Central Vac Kit 5 (127) 3/16 (5) .20–.24 (149–179) 10,000 2.12 (.965) 8.42 (214) 3.8 (96.6) Hookit™ 20353 051141-28520-7

28521 Central Vac Kit 6 (150) 3/32 (2.5) .20–.24 (149–179) 10,000 2.19 (.995) 8.85 (225) 3.8 (96.6) Hookit™ 20356 051141-28521-4

28522 Central Vac Kit 6 (150) 3/16 (5) .20–.24 (149–179) 10,000 2.24 (1.02) 8.85 (225) 3.8 (96.6) Hookit™ 20356 051141-28522-1

28523 Non-Vac Kit 5 (127) 3/32 (2.5) .20–.24 (149–179) 10,000 1.92 (.875) 6.81 (173) 3.82 (97.2) Stikit™ 20351 051141-28523-8

28524 Non-Vac Kit 5 (127) 3/16 (5) .20–.24 (149–179) 10,000 1.98 (.9) 6.81 (173) 3.82 (97.2) Stikit™ 20351 051141-28524-5

28525 Non-Vac Kit 6 (150) 3/32 (2.5) .20–.24 (149–179) 10,000 1.99 (.905) 7.28 (185) 3.82 (97.2) Stikit™ 20354 051141-28525-2

28526 Non-Vac Kit 6 (150) 3/16 (5) .20–.24 (149–179) 10,000 2.04 (.93) 7.28 (185) 3.82 (97.2) Stikit™ 20354 051141-28526-9

Power Supply Input: 100–240 VAC, 47–63 HZ; Power Supply Output: 30 VDC, 5 Amps

3M™ Electric Random Orbital Sanders* (Sander Only)

Model No. Vacuum

Tool Dia.

Inch (mm)

Orbit Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Pad

Included UPC

28430 Central Vacuum 5 (127) 3/32 (2.5) .20–.24 (149–179) 10,000 2.08 (.945) 8.42 (214) 3.8 (96.6) Hookit™ 20353 051141-28430-9

28431 Central Vacuum 5 (127) 3/16 (5) .20–.24 (149–179) 10,000 2.12 (.965) 8.42 (214) 3.8 (96.6) Hookit™ 20353 051141-28431-6

28432 Central Vacuum 6 (150) 3/32 (2.5) .20–.24 (149–179) 10,000 2.19 (.995) 8.85 (225) 3.8 (96.6) Hookit™ 20356 051141-28432-3

28433 Central Vacuum 6 (150) 3/16 (5) .20–.24 (149–179) 10,000 2.24 (1.02) 8.85 (225) 3.8 (96.6) Hookit™ 20356 051141-28433-0

28426 Non-Vacuum 5 (127) 3/32 (2.5) .20–.24 (149–179) 10,000 1.92 (.875) 6.81 (173) 3.82 (97.2) Stikit™ 20351 051141-28426-2

28427 Non-Vacuum 5 (127) 3/16 (5) .20–.24 (149–179) 10,000 1.98 (.9) 6.81 (173) 3.82 (97.2) Stikit™ 20351 051141-28427-9

28428 Non-Vacuum 6 (150) 3/32 (2.5) .20–.24 (149–179) 10,000 1.99 (.905) 7.28 (185) 3.82 (97.2) Stikit™ 20354 051141-28428-6

28429 Non-Vacuum 6 (150) 3/16 (5) .20–.24 (149–179) 10,000 2.04 (.93) 7.28 (185) 3.82 (97.2) Stikit™ 20354 051141-28429-3

*Sanders require use of Power Supply w/AC Power Cord (PN28436) and 3M™ Power Cord (PN 28434)

2842628430

3M™ Electric Random Orbital Sanders

Consistent performance when air supply is inadequate or mobility is needed.

• Provides significant energy cost savings vs. pneumatics

• Low-profile design enables increased operator control and less vibration

• Extended, curved wrist rest for more support

• Exclusive 3M™ Gripping Material for added comfort and reduced vibration

• Variable speed settings: 7,000, 9,000 and 10,000 RPM

3M™ Power Tools for Random Orbital Systems

28337

3M™ Random Orbital Sander, 2-Hand

Model No. Vacuum

Tool Dia.

Inch (mm)

Orbit Dia.

Inch (mm)

Motor

HP (W)

Max

RPM

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Airflow Rate

SCFM (LPM)

Clean Sanding

Pad Included UPC

28337 Central/Non-Vac 6 (150) 3/8 (9.5) 0.45 (336) 12,000 2.90 (1.32) 12.93 (328.3) 4.43 (112.6) 21 (594) Hookit™ 20356* 051141-28337-1

28335 Self-Gen Vac 6 (150) 3/8 (9.5) 0.45 (336) 12,000 2.90 (1.32) 12.93 (328.3) 4.43 (112.6) 21 (594) Hookit™ 20356* 051141-28335-7

*For 5" sanding using the 2-Hand Sander, use the 5" 3M™ Hookit™ D/F Disc Pad 28411

Random Orbital Systems

Product Name UPC Qty./Case For Use With Size/Description Max RPM Max OPM

3M™ Hook-and-Loop Disc

Pad Holder No. 905

048011-09448-9 1 Scotch-Brite™ Surface

Conditioning Discs 5" x 5/16–24 EXT 10,000 N/A

3M™ Hookit™ Disc Pad

051144-13625-4 10

3M™ Hookit™ Discs and

Scotch-Brite™ Coating

Removal Discs

5" x 3/4" x 5/16–24 EXT 10,000 12,000

051141-28709-6 10

3M™ Hookit™ Discs and

Scotch-Brite™ Coating

Removal Discs

6" x 3/4" x 5/16–24 EXT 12,000 12,000

3M™ Hookit™ Low

Profile Disc Pad 051141-20352-2 10 3M™ Hookit™ Discs and

Scotch-Brite™ RO Discs

5" x 3/8" x 5/16–24 EXT;

Low Profile 12,000 12,000

051131-05755-5 10

3M™ Hookit™ Discs and

Scotch-Brite™ Coating

Removal Discs

5" x 3/8" x 5/16–24 EXT;

Low Profile 12,000 12,000

051141-20355-3 10 3M™ Hookit™ Discs and

Scotch-Brite™ RO Discs

6" x 3/8" x 5/16–24 EXT;

Low Profile 12,000 12,000

3M™ Stikit™ Disc Pads 051131-05545-2 10 3M™ Stikit™ Discs 5" x 11/16" 5/16–24 EXT;

Low Profile Finishing 12,000 12,000

051131-05546-9 10 3M™ Stikit™ Discs 6" x 11/16" 5/16–24 EXT;

Low Profile Finishing 10,000 12,000

051131-05555-1 10 3M™ Stikit™ Discs 5" x 3/8" 5/16–24 EXT;

Low Profile 12,000 12,000

051144-05575-3 1/10 3M™ Stikit™ Discs 5" x 3/4" x 5/16–24 10,000 12,000

051141-28772-0 1/10 3M™ Stikit™ Discs 6" x 3/4" x 5/16–24 10,000 12,000

051141-20351-5 10 3M™ Stikit™ Discs 5" x 3/8" x 5/16–24 EXT;

Red Foam; Low Profile 12,000 12,000

051141-20354-6 10 3M™ Stikit™ Discs 6" x 3/8" x 5/16–24 EXT;

Red Foam; Low Profile 12,000 12,000

051144-81821-1 10 3M™ Stikit™ Discs 5" x 3/4" 5/16–24 EXT 10,000 12,000

051144-88736-1 10 3M™ Stikit™ Discs 5" x 3/8" 5/16–24 EXT;

Tapered Edge; Low Profile 10,000 12,000

Random Orbital Systems

Accessories for Random Orbital Systems

Abrasive

Belt Systems

Abrasive Belt Systems

3M™ Belts

3M is the one-stop shop for all of your abrasive

metalworking belt needs! We offer a product tailored to

nearly every application and performance level. To select

the best product for your application, check out our

easy-to-use Belt Selection Guide. Each tier of product

offers best-in-class performance at various price points.

Once you have selected the product, use the Availability

Guide to select your grade. The following section

includes our most popular belt items, but remember,

we can provide any size belt that you might need!

Abrasive Speed Recommendations for Off-Hand Applications

Alloy

Belt Speed

(surface feet per minute) Applicable Belt Grades

Cast Iron 7,000 24–120

Carbon Steel 6,500 24–120

Stainless Steel 6,500–7,000 36–120

Nickel Alloys 6,000 36–120

Titanium 2,500–3,000 36–180

Aluminum 7,500–8,500 24–120

Aluminum 6,500–7,000 Fine Grades

Brass 7,000–8,000 36–180

Rubber 4,500 36–180

Glass 2,500–5,000 80–400

Glass 6,000–8,000 80–400

Stone 7,000 36–180

3M™ Coated Abrasive Belt Availability Guide

3M ID Mineral Backing

Grinding

Aid

Use

Dry/Wet 600 500 400 320 240 220 180 150 120 100 80 60 50 40 36 24

241E

Aluminum

Oxide

XE Dry P PPPPP•

302D J Dry PPPPPPPPPP••

332D Flex X Dry PPPPPPPP••

341D X Dry P P P P P P P P • • • • • •

361F XF Dry/Wet P P P P P P P P • • • • • •

461F Silicon Carbide XF Dry/Wet P PPPPPPPPPP PP

577F Alumina Zirconia YF Yes Dry/Wet • • • • • • • • • •

747D Ceramic A/O* Blend XYes Dry P P P • • • •

777F YF Yes Dry/Wet P P P P • • • • •

947A Precision Shaped

Ceramic and A/O* Blend XYes Dry/Wet + + + +

963G

Ceramic

YN Dry/Wet • • ••••••

966F YF Dry/Wet ••••••

977F YF Yes Dry/Wet • • ••••••

984F Precision

Shaped

Ceramic

YF Yes Dry/Wet + + +

994F ZF Dry/Wet +

997F ZF Yes Dry/Wet +

*A/O – Aluminum Oxide

Key • = Available grade P = FEPA (P-grade) + = 3M precision shaped grain

How to Use the Coated Abrasive Belt Selection Guide

1. Find the machine type that you will run this belt on.

2. Move down to the metal type that is being worked on.

3. Select the product from the list of Good – Better – Best and Finishing belts.

4. Check the Availability Guide for the grade.

5. Find the product on the following pages for available sizes.

6. If your size is not listed, contact your 3M distributor or 3M representative for ordering instructions.

For the ultimate in performance for coarse grade grinding in any

application, be sure to try the latest innovation: 3M™ Cubitron™ II

Metalworking Belts.

Note

3M™ Coated Abrasive Belt Selection Guide

Performance

Portable/

File Tool

Coarse Grade

Power Grinding/

High Pressure

Slack of Belt

Sander

Stroke

Sander

Bench Top

Belt Machine

Backstand/

Off Hand

Centerless & Roll

Grinding Flat Finishing

Dry Wet Dry Wet

Carbon Steel

Good 241E 577F 341D — 341D 341D — — 341D 361F

Better 577F 963G 577F — 577F 577F 577F 577F 577F 577F

Best 984F/947A 984F/994F/997F 947A — 984F/947A 984F/947A 966F 966F 966F 966F

Finishing — — 341D/

Trizact* —341D/

Trizact*

3XXD**/

Trizact*

777F/

Trizact* Trizact* 461F 461F

Stainless Steel

Good — — 577F 341D 577F 577F — — 341D 361F

Better 577F 577F 777F — 777F 777F 577F 577F 577F 577F

Best 984F/947A 984F/994F/997F 947A 747D/

947A 984F/947A 984F/947A 977F 966F 984F 984F

Finishing — — Trizact* — Trizact* 3XXD**/

Trizact*

777F/

Trizact* Trizact* 461F/

Trizact*

461F/

Trizact*

Aluminum, Brass, Bronze

Good 241E 577F — — — — — — 341D 361F

Better 577F 963G 577F — 577F 577F 577F 577F 577F 577F

Best 984F/947A 984F/994F/997F 947A — 984F/947A 984F/947A — — — —

Finishing — — 341D/

Trizact* —341D/

Trizact*

3XXD**/

Trizact*

341D/

Trizact* 461F 461F 461F

Cobalt and Nickel Alloys

Good — — 577F — 577F 577F — — 577F 577F

Better 577F 577F 777F — 777F 777F 577F 577F 777F 777F

Best 984F/947A 984F/994F/997F 947A — 984F/947A 984F/947A 977F 966F 984F 984F

Finishing — — Trizact* — Trizact* 3XXD**/

Trizact*

777F/

Trizact* Trizact* 461F 461F

Titanium

Good — — 461F — 461F 461F — — — 461F

Better 577F 577F 577F — 577F 577F — 577F — 577F

Best 984F 984F/994F/997F — — 984F 984F — 966F — 966F

Finishing — — 461F/Trizact* — 461F/

Trizact*

3XXD**/

Trizact* — Trizact* — 461F

*For specific Trizact product recommendations, see page 47. **3XXD: Choose from 302D, 332D and 341D depending upon backing flexibility needed for application.

Abrasive Belt Systems

3M™ Trizact™ Belt Selection Guide

3M™ Trizact™ Belt Availability Guide

3M ID Mineral Backing Description

Use

Dry/Wet

A Grade

300 160 110 100 90 80 65 60 45 35 30 20 16 10 6 5 3

217EA

Aluminum

Oxide

Flex. J wt. Low Pressure Dry • • • • • • •

237AA Semi Flex. X wt. Low-Med Pressure Dry • • • • • • • •

253FA Stiff X wt. Low-Med Pressure Wet • • • • • • •

305EA Flex. J wt. Fine Finishing Dry • •

307EA Flex. J wt. Low-Med Pressure Dry • • • • • • •

327DC Semi Flex. X wt. Low Pressure Dry • • • • • •

337DC Semi Flex. X wt. Med Pressure Dry • • • • • •

347FC Semi Flex. X wt. High Pressure Wet/Dry • • • • • •

363FC Stiff YF wt. Med-High Pressure Wet • • • • • •

407EA Silicon

Carbide

Flex. J wt. Low-Med Pressure Dry • • • •

463FC Stiff YF wt. Med-High Pressure Wet • • • •

953FA Ceramic Stiff YF wt. Med-High Pressure Wet • • • • • • • • • •

Portable Tools

Centerless/Roll Grinder/

Tool Post (Dry) Stroke/

Platen Sander

Backstand, Robotic Flat Finisher

Med. Pressure Lt. Pressure Dry WetDry Wet

Mild Steel, Stainless, Nickel, Cobalt Alloys

307EA 237AA 347FC 237AA 237AA 217EA 237AA 253FA

237AA 327DC 363FC/463FC 347FC 307EA 237AA 347FC 363FC

347FC 347FC 463FC/953FA — 337DC 327DC — 463FC

Aluminum, Brass, Copper

217EA 237AA 347FC — 237AA 217EA 237AA 253FA

237AA 327DC 363FC/463FC 237AA 307EA 237AA 347FC 363FC/463FC

347FC 347FC — 347FC 337DC 327DC — —

Titanium

237AA, 347FC, 407EA 407EA, 347FC 363FC/463FC 407EA 237AA, 337DC, 407EA 217EA, 327DC, 407EA 237AA 363FC/463FC

Chrome

347FC 327DC 347FC — — — — —

— — 363FC/463FC — — — — —

— — 953FA — — — — —

3M precision shaped

grain sharpens as it wears.

Compared to conventional

ceramic abrasive grain,

3M™ Cubitron™ II abrasive

grain belts cut faster and

last longer!

Conventional Ceramic 3M™ Cubitron™ II

Triangular-shaped grain

(right) is electrostatically

oriented to form sharp

peaks, each acting like

individual cutting tools

that wear evenly for super

long life and consistency.

Precision Shaped GrainConventional Grain

3M™ Cubitron™ II

Metalworking Belt 984F

• Made with revolutionary 3M precision

shaped abrasive grain technology

• YF wt. backing

• Average up to 30% faster cutting

on hard-to-grind metals than the

next-best competitive belt

• Lasts up to 4 times as long as conventional

ceramic aluminum oxide belts

• Cuts cooler — diverts heat from the

work piece and belt to the swarf

• Helps eliminate burnishing and heat stress

UPC W x L Grade Min./Case

Portable, Backstand, Benchtop, Flat Finishing

051141-55032-9 1/4" x 24" 60+ 50/200

051141-27511-6 1/2" x 18" 36+ 50/200

051141-55041-1 1/2" x 18" 60+ 50/200

051141-55048-0 1/2" x 18" 80+ 50/200

051141-27512-3 1/2" x 24" 36+ 50/200

051141-55031-2 1/2" x 24" 60+ 50/200

051141-55054-1 1/2" x 24" 80+ 50/200

051141-55040-4†1/2" x 42" 60+ 200

051141-55064-0 3/4" x 18" 36+ 50/200

051141-55030-5 3/4" x 18" 60+ 50/200

051141-55047-3 3/4" x 18" 80+ 50/200

051141-55065-7 3/4" x 20-1/2" 36+ 50/200

051141-55055-8 3/4" x 20-1/2" 80+ 50/200

051141-55046-6 1" x 11" 60+ 50/500

051141-55050-3†1" x 11" 80+ 50/500

051141-55060-2†1" x 42" 80+ 25/200

051141-27514-7 1" x 132" 36+ 100

051141-55039-8 1" x 132" 60+ 25/200

051141-55052-7 1" x 132" 80+ 25/200

051141-55066-4†1-1/2" x 132" 36+ 25/50

† Made-to-Order

3M Precision Shaped Grain

3M™ Cubitron™ II Metalworking Belt 984F (cont.)

UPC W x L Grade Qty./Case

051141-55068-8 2" x 60" 36+ 10/50

051141-55036-7†2" x 60" 60+ 25/50

051141-27516-1 2" x 72" 36+ 50

051141-55034-3 2" x 72" 60+ 25/50

051141-55057-2 2" x 72" 80+ 25/50

051141-55067-1 2" x 118" 36+ 10/50

051141-27460-7 2" x 132" 36+ 50

051141-55044-2 2" x 132" 60+ 25/50

051141-55056-5 2" x 132" 80+ 25/50

051141-55069-5 2-1/2" x 60" 36+ 10/50

051141-27853-7†2-1/2" x 60" 60+ 25/50

051141-55058-9†2-1/2" x 60" 80+ 25/50

051141-27461-4 3" x 132" 36+ 25

051141-55043-5 3" x 132" 60+ 25

051141-55051-0 3" x 132" 80+ 25

051141-55042-8 3-1/2" x 15-1/2" 60+ 50

051141-55049-7 3-1/2" x 15-1/2" 80+ 50

051141-27462-1 4" x 132" 36+ 25

051141-55070-1 5" x 132" 36+ 25

051141-55071-8 6" x 48" 36+ 10/20

051141-55037-4 6" x 48" 60+ 20

051141-55059-6†6" x 48" 80+ 20

051141-55035-0 6" x 60" 60+ 20

051141-27515-4 6" x 132" 36+ 10/20

051141-55072-5 8" x 107" 36+ 5/10

051141-27513-0 8" x 132" 36+ 10

051141-55063-3†37" x 60" 80+ 2

051141-55062-6†37" x 75" 80+ 2

† Made-to-Order

Abrasive Belt Systems

3M™ Cubitron™ II Belts

Our new lineup of 3M™ Cubitron™ II Abrasive Belts

Other Soft

Metals Aluminum

Carbon

Steel

Stainless

Steel

Cobalt

Chrome Nickel Titanium

Application Pressure

High Low

Flexibility

Low High

997F

947A

984F

994F

3M™ Cubitron™ II

Abrasive Belt 947A

• Made with revolutionary 3M precision

shaped abrasive grain technology

• Flexible X wt. poly-cotton backing

• Optimized for low-medium pressure applications

on stainless, mild steel and aluminum

UPC W x L Grade Min./Case

051125-94700-8 1/4" x 24" 60+ 50/200

051125-94701-5 1/4" x 24" 80+ 50/200

051125-94702-2 1/4" x 24" 120+ 50/200

051125-94703-9 1/2" x 18" 60+ 50/200

051125-94704-6 1/2" x 18" 80+ 50/200

051125-94705-3 1/2" x 18" 120+ 50/200

051125-94706-0 1/2" x 24" 60+ 50/200

051125-94707-7 1/2" x 24" 80+ 50/200

051125-94708-4 1/2" x 24" 120+ 50/200

051125-94709-1 3/4" x 18" 60+ 50/200

051125-94710-7 3/4" x 18" 80+ 50/200

051125-94711-4 3/4" x 18" 120+ 50/200

051125-94712-1 3/4" x 20-1/2" 60+ 50/200

051125-94713-8 3/4" x 20-1/2" 80+ 50/200

051125-94714-5 3/4" x 20-1/2" 120+ 50/200

051125-94715-2 1" x 11" 80+ 50/200

051125-94716-9 1" x 11" 120+ 50/200

051125-94717-6 1" x 30" 80+ 50/200

051125-94718-3 1" x 30" 120+ 50/200

051125-94719-0 1" x 42" 80+ 25/50

051125-94720-6 1" x 42" 120+ 25/50

051125-94721-3 2" x 60" 60+ 25/50

051125-94722-0 2" x 60" 80+ 25/50

051125-94723-7 2" x 60" 120+ 25/50

051125-94724-4 2" x 72" 60+ 25/50

051125-94725-1 2" x 72" 80+ 25/50

051125-94726-8 2" x 72" 120+ 25/50

051125-94727-5 2" x 132" 60+ 25/50

051125-94728-2 2" x 132" 80+ 25/50

051125-94729-9 2" x 132" 120+ 25/50

051125-94730-5 3" x 132" 60+ 25

051125-94731-2 3" x 132" 80+ 25

051125-94732-9 3" x 132" 120+ 25

051125-94733-6 3-1/2" x 15-1/2" 60+ 10/50

051125-94734-3 3-1/2" x 15-1/2" 80+ 10/50

051125-94735-0 3-1/2" x 15-1/2" 120+ 10/50

051125-94736-7 6" x 48" 60+ 20

051125-94737-4 6" x 48" 80+ 20

051125-94738-1 6" x 48" 120+ 20

Abrasive Belt Systems

3M™ Cubitron™ II Belts

3M™ Cubitron™ II

Abrasive Belt 994F

• Made with revolutionary 3M precision

shaped abrasive grain technology

• Tough, durable ZF wt. cloth backing

• Optimal for high pressure carbon

steel and aluminum applications

UPC Grade W x L Min./Case

051141-54677-3 36+

Belt sizes made to order.

Specify UPC, grade and

belt size (W" x L"). Belts

wider than 25" require

multiple splices.

Determined

by belt size.

3M™ Cubitron™ II

Abrasive Belt 997F

• Made with revolutionary 3M precision

shaped abrasive grain technology

• Tough, durable ZF wt. cloth backing

• Superb in high pressure stainless,

cobalt chrome and nickel alloy applications

UPC Grade W x L Min./Case

051141-54382-6 36+

Belt sizes made to order.

Specify UPC, grade and

belt size (W" x L"). Belts

wider than 25" require

multiple splices.

Determined

by belt size.

3M™ Trizact™ Abrasive Belts

The unique microreplicated construction used in 3M™ Trizact™ Abrasives can deliver consistent, predictable finishes, higher,

more even rates of cut, cooler grinding and finishing temperatures, and reduced processing steps. 3M invented microreplication

technology, which is the science of creating small, precisely shaped three-dimensional structures and then reproducing them on

a variety of surfaces.

Trizact Abrasive Grading System

The unique construction of Trizact abrasives requires a

different grading system. Grade is defined by the average

particle size in microns and begins with an “A”.

Trizact Abrasive Grade FEPA (P-Grade)

A5 P3000

A6 —

A10 P1500

A16 P1200

A20 P1000

A30 P600

A35 —

A45 P400

— P320

A60 —

A65 —

A75 P240

A80 —

A90 P220

A100 P180

A110 P180

A130 P150

A160 P120

The Difference is in the Construction

Trizact abrasives allow you to say “goodbye” to erratic,

inconsistent finishes generated by conventional coated

abrasives. Here’s why:

Three-dimensional structures uniformly distributed over

the entire surface of 3M™ Trizact™ Abrasives (left) ensure

consistent performance and eliminate belt-to-belt variation.

Conventional abrasives (right), which feature randomly

arranged minerals, wear and finish unevenly.

3M™ Trizact™ Abrasives have three-dimensional structures

containing multiple layers of abrasive mineral. As these

pyramid-like structures wear, fresh, sharp mineral is exposed.

Conventional abrasives start out sharp, but they dull quickly.

Abrasive Belt Systems

3M™ Trizact™ Abrasive Belts

3M™ Trizact™ 237AA

• Semi-flexible abrasive

• Aluminum oxide mineral

• Great choice for stainless

steel finishes

UPC W x L Grade Qty./Case

051119-82624-1†1" x 11" A6 500

051125-32361-1†1" x 11" A16 500

051115-27208-0†1" x 11" A45 500

051111-66892-4†1" x 11" A65 500

051111-69366-7†1" x 11" A100 500

051125-22681-3†1" x 12" A100 200

051111-69377-3†1" x 30" A30 200

051125-15699-8†1" x 42" A16 200

051125-08603-5†1" x 42" A100 200

051111-69676-7†1" x 42" A160 20

051119-09095-6†1" x 60" A6 200

051119-09093-2†1" x 60" A16 200

051119-10286-4†1" x 60" A45 200

051115-27051-2†1" x 60" A65 200

† Made-to-Order

3M™ Trizact™ 217EA

• Ideal for aluminum,

copper, brass and zinc

alloys to final finishing

• Good for low pressure applications

• Flexible belt for intermediate finish and dimensioning

UPC W x L Grade Min./Case

051125-23664-5†4" x 84" A45 50

051125-15686-8†4" x 106" A45 50

051125-20639-6†4" x 118" A6 50

051125-14350-9†4" x 118" A16 50

051111-66834-4†4" x 118" A30 50

051125-13733-1†4" x 118" A45 50

051125-16987-5†4" x 120" A16 50

051111-66830-6†4" x 132" A6 50

051111-69360-5†4" x 132" A16 50

051111-66835-1†4" x 132" A30 50

051111-66841-2†4" x 132" A45 50

051111-69669-9†4" x 132" A65 50

051119-05828-4†4" x 132" A80 50

051125-12699-1†4" x 168" A30 50

051125-12479-9†4" x 168" A80 50

† Made-to-Order

3M™ Trizact™ 237AA (cont.)

UPC W x L Grade Min./Case

051119-10263-5†1" x 64" A6 200

051125-55143-4†1" x 65" A16 200

051111-66945-7†1" x 130" A100 20

051115-27112-0†1" x 132" A45 200

051115-27111-3†1" x 132" A100 200

051115-27804-4†2" x 34" A100 50

051111-69673-6†2" x 48" A16 25/50

051115-27731-3†2" x 48" A30 50

051119-09379-7†2" x 48" A45 50

051125-20671-6†2" x 48" A80 50

051111-69043-7†2" x 48" A100 50

051119-84184-8†2" x 48" A160 50

051115-27408-4†2" x 60" A65 50

051119-59769-1†2" x 60" A80 50

051125-54544-0†2" x 60" A100 50

051115-27487-9†2" x 72" A16 50

051115-27653-8†2" x 72" A30 50

051115-27787-0†2" x 72" A65 50

051115-27904-1†2" x 72" A80 50

051111-69671-2†2" x 72" A100 25/50

051115-27849-5†2" x 72" A160 50

051111-69369-8†2" x 107" A16 25/50

051111-69680-4†2" x 107" A45 25/50

051111-66938-9†2" x 107" A80 50

051111-69383-4†2" x 118" A6 25/50

051111-66860-3†2" x 118" A16 50

051125-22263-1†2" x 118" A30 50

051111-66856-6†2" x 132" A6 50

051111-69370-4†2" x 132" A16 25/50

051115-27658-3†2" x 132" A30 50

051111-69028-4 2" x 132" A45 50

051111-69036-9†2" x 132" A65 50

051111-69044-4 2" x 132" A100 50

051119-77007-0†2" x 148" A16 50

051125-20169-8†2" x 148" A100 50

051125-22175-7†2" x 157" A65 50

051111-69294-3†3" x 24" A6 50

051111-69290-5†3" x 24" A16 50

051111-69291-2†3" x 24" A30 50

051125-14935-8†3" x 24" A80 50

051119-83067-5†3" x 60" A16 50

051111-69045-1†3" x 60" A100 50

051119-82467-4†3" x 72" A80 50

051111-69295-0†3" x 72" A160 25/50

† Made-to-Order

Abrasive Belt Systems

3M™ Trizact™ Abrasive Belts

3M™ Trizact™ 237AA (cont.)

UPC W x L Grade Min./Case

051111-69015-4†3" x 90" A16 50

051111-69021-5†3" x 90" A30 50

051111-69029-1†3" x 90" A45 50

051111-69047-5†3" x 90" A100 50

051111-66863-4†3" x 118" A16 50

051111-69022-2†3" x 118" A30 50

051125-19954-4†3" x 132" A6 50

051111-51199-2 3" x 132" A16 50

051111-51207-4 3" x 132" A30 50

051111-51209-8 3" x 132" A45 50

051111-69037-6†3" x 132" A65 50

051111-69051-2†3" x 132" A160 50

051111-66864-1†3" x 148" A16 50

051111-69292-9†3" x 148" A30 50

051111-69293-6†3" x 148" A45 50

051115-26995-0†3" x 157" A45 50

051115-27921-8†3" x 157" A65 50

051125-19529-4†3" x 157" A80 50

051115-27798-6†3" x 168" A16 25

051111-66876-4†3" x 168" A30 50

051115-28033-7†3" x 168" A45 50

051111-69371-1†3" x 300" A16 50

051111-69381-0†3" x 300" A45 50

051111-69385-8†3" x 300" A65 50

051115-27777-1†3" x 346" A80 25

051115-27145-8†4" x 36" A65 50

051111-66949-5†4" x 36" A100 50

051125-11794-4†4" x 40" A100 50

051119-68279-3†4" x 48" A100 50

051115-27859-4†4" x 72" A16 50

051125-10967-3†4" x 84" A65 50

051119-67382-1†4" x 84" A100 50

051115-27749-8†4" x 90" A6 50

051111-69016-1†4" x 90" A16 50

051111-51204-3 4" x 90" A30 50

051111-69030-7†4" x 90" A45 50

051119-73517-8†4" x 90" A65 50

051115-27592-0†4" x 90" A80 50

051111-69672-9†4" x 90" A100 25/50

051115-27593-7†4" x 90" A160 50

† Made-to-Order

3M™ Trizact™ 237AA (cont.)

UPC W x L Grade Min./Case

051115-27153-3†4" x 106" A30 50

051115-26818-2†4" x 106" A100 50

051111-66867-2†4" x 118" A16 50

051111-66878-8†4" x 118" A30 50

051111-66888-7†4" x 118" A45 50

051111-66897-9†4" x 118" A65 50

051125-17651-4†4" x 118" A100 50

051115-26883-0†4" x 124" A30 50

051111-69251-6†4" x 132" A6 25/50

051111-69017-8 4" x 132" A16 50

051111-51214-2 4" x 132" A30 50

051111-69031-4†4" x 132" A45 50

051111-69387-2†4" x 132" A65 25/50

051111-66941-9†4" x 132" A80 25/50

051111-69048-2†4" x 132" A100 50

051111-69375-9†4" x 132" A160 25/50

051111-66950-1†4" x 146" A100 50

051125-11757-9†4" x 158" A45 50

051115-27521-0†4" x 168" A16 50

051119-10264-2†4" x 168" A30 50

051119-08908-0†4" x 168" A65 50

051111-69681-1†4" x 274" A45 50

051115-27303-2†4" x 352" A160 50

051115-27467-1†4" x 354" A65 50

051111-68739-0†4" x 354" A100 25

051111-68738-3†4" x 354" A160 50

† Made-to-Order

3M™ Trizact™ 253FA

• Ideal for wet flat-finishing and

wet intermediate finishing of

centerless applications

• Great on stainless steel,

carbon steel and carbon

fibre composites

UPC Grade W x L Min./Case

051135-13635-5 A6 Belt sizes

made to order.

Specify UPC,

grade and belt

size (W" x L").

Belts wider than

25" require

multiple splices.

Determined

by belt size.

051135-13636-2 A16

051135-13637-9 A30

051135-13638-6 A45

051135-13639-3 A65

051135-13640-9 A80

051135-13641-6 A100

Abrasive Belt Systems

3M™ Trizact™ Abrasive Belts

3M™ Trizact™ 307EA

• Flexible cloth backing

• Aluminum oxide mineral

• Perfect choice for preplate

surface finishes

UPC W x L Grade Min./Case

051111-67100-9†1" x 42" A80 200

051111-69408-4†1" x 42" A100 50/200

051111-67101-6†1" x 60" A80 200

051115-27801-3†1" x 72" A16 200

051115-27448-0†1" x 72" A45 200

051125-14659-3†1" x 72" A65 200

051119-63318-4†1" x 76" A6 200

051125-50495-9†1" x 76" A30 200

051111-67055-2†1" x 77" A6 200

051111-67068-2†1" x 77" A30 200

051115-19520-4†1" x 77" A45 25/200

051115-26828-1†1" x 132" A6 200

051115-27410-7†1" x 132" A16 200

051115-27346-9†1" x 132" A45 200

051115-27491-6†1" x 132" A80 200

051115-27830-3†2" x 36" A16 50

051125-40962-9†2" x 48" A65 50

051119-58606-0†2" x 60" A30 50

051119-75663-0†2" x 60" A45 50

051125-46217-4†2" x 60" A65 50

051125-11024-2 2" x 72" A6 50

051111-69061-1 2" x 72" A16 50

051111-69067-3 2" x 72" A30 50

051111-69072-7†2" x 72" A45 50

051111-69074-1†2" x 72" A65 50

051111-69079-6 2" x 72" A100 50

051125-34816-4 2" x 76" A30 50

051111-61067-1†2" x 83" A6 200

051111-61066-4 2" x 83" A16 200

051115-27125-0†2" x 90" A16 50

051125-47160-2†2" x 96" A65 50

051111-68818-2†2" x 118" A6 50

051119-09343-8†2" x 118" A16 50

051125-20950-2†2" x 118" A30 50

051125-20345-6†2" x 118" A45 50

051111-51206-7 2" x 132" A6 25/50

051111-51202-9 2" x 132" A16 25/50

051111-69068-0 2" x 132" A30 50

051111-51210-4 2" x 132" A45 50

051111-69075-8 2" x 132" A65 50

051111-69077-2 2" x 132" A80 50

051111-69080-2 2" x 132" A100 50

051111-69409-1†2" x 138" A16 50

051111-67059-0†2" x 148" A6 50

051115-19517-4†2" x 148" A16 25/50

051111-69069-7†2" x 148" A30 50

† Made-to-Order

3M™ Trizact™ 307EA (cont.)

UPC W x L Grade Min./Case

051125-20168-1†2" x 148" A45 50

051111-67091-0†2" x 148" A65 50

051111-67064-4†3" x 60" A16 50

051115-27893-8†3" x 72" A16 50

051125-38992-1†3" x 72" A30 50

051125-30837-3†3" x 72" A100 50

051111-69410-7†3" x 90" A16 25/50

051125-49713-8†3" x 90" A65 50

051111-67077-4†3" x 96" A30 50

051111-69256-1†3" x 96" A65 50

051111-68819-9†3" x 118" A6 50

051111-69063-5†3" x 118" A16 50

051111-51203-6 3" x 118" A30 50

051111-67084-2†3" x 118" A45 50

051111-67106-1†3" x 118" A80 50

051111-67111-5†3" x 118" A100 50

051115-27418-3†3" x 120" A16 50

051125-20567-2†3" x 120" A30 50

051125-30879-3†3" x 120" A45 50

051111-69059-8†3" x 132" A6 50

051125-13220-6†3" x 132" A16 full flex 50

051111-51200-5 3" x 132" A16 25/50

051111-51201-2 3" x 132" A30 25/50

051125-16874-8†3" x 132" A30 full flex 50

051111-69073-4 3" x 132" A45 50

051111-69076-5†3" x 132" A65 50

051111-69078-9 3" x 132" A80 50

051111-69082-6†3" x 132" A100 50

051111-67065-1†3" x 148" A16 50

051115-27594-4†3" x 168" A6 50

051115-19518-1†3" x 168" A16 25/50

051111-67087-3†3" x 168" A45 50

051115-27604-0†4" x 36" A30 50

051111-69060-4†4" x 90" A6 50

051111-69064-2†4" x 90" A16 50

051115-19522-8†4" x 90" A65 25/50

051125-22401-7†4" x 118" A6 50

051111-69065-9 4" x 118" A16 50

051111-69070-3†4" x 118" A30 50

051111-67107-8†4" x 118" A80 50

051111-67112-2†4" x 118" A100 50

051115-27766-5†4" x 132" A6 50

051111-69066-6†4" x 132" A16 50

051111-69071-0 4" x 132" A30 50

051111-51212-8 4" x 132" A45 50

051115-26922-6†4" x 132" A80 50

051119-73781-3†4" x 132" A100 50

051111-68821-2†4" x 168" A30 50

051115-26997-4†4" x 240" A16 25

051111-67113-9†4" x 240" A100 50

† Made-to-Order

Abrasive Belt Systems

3M™ Trizact™ Abrasive Belts

3M™ Trizact™ 327DC

• Use for mill line removal, intermediate scratch

refinement, consistent dimensioning and

consistent finishing applications

• Macroreplicated aluminum oxide

on a flexible backing

• Grinding aid

• For dry use only

UPC Grade W x L Min./Case

051135-94693-0 A30 Belt sizes

made to order.

Specify UPC,

grade and belt

size (W" x L").

Belts wider than

25" require

multiple splices.

Determined

by belt size.

051135-94692-3 A45

051135-94691-6 A65

051135-94690-9 A100

051135-29683-7 A160

051135-94689-3 A300

3M™ Trizact™ 347FC

• 3M ceramic abrasive

grain on a macroreplicated,

flexible X wt. backing

• For high-pressure applications on hard

metals, nickel alloys, titanium and stainless steel

UPC Grade W x L Min./Case

051125-64275-0 A30 Belt sizes

made to order.

Specify UPC,

grade and belt

size (W" x L").

Belts wider than

25" require

multiple splices.

Determined

by belt size.

051125-64274-3 A45

051125-64273-6 A65

051125-64272-9 A100

051125-64271-2 A160

051125-64270-5 A300

3M™ Trizact™ CF 337DC

• Macroreplicated

structure provides

long product life

and consistent

cut and finish

• For use on backstand grinders

UPC W x L Grade Qty./Case

051141-20646-2†1" x 132" A300 100

048011-33156-0 2" x 60" A45 5

048011-33155-3 2" x 60" A65 5

048011-33154-6†2" x 60" A100 5

048011-33153-9†2" x 60" A160 5

048011-33152-2†2" x 60" A300 5

048011-33161-4†2" x 72" A45 5

048011-33160-7†2" x 72" A65 5

048011-33159-1†2" x 72" A100 5

048011-33158-4†2" x 72" A160 5

048011-33157-7†2" x 72" A300 5

048011-33166-9†2" x 132" A45 5

048011-33165-2†2" x 132" A65 5

048011-33164-5†2" x 132" A100 5

048011-33163-8†2" x 132" A160 5

048011-33162-1†2" x 132" A300 5

048011-33171-3†3" x 132" A45 5

048011-33170-6†3" x 132" A65 5

048011-33169-0†3" x 132" A100 5

048011-33168-3†3" x 132" A160 5

048011-33167-6†3" x 132" A300 5

† Made-to-Order

3M™ Trizact™

Cloth Belts 363FC

• Centerless/cylindrical/flat

part grinding and finishing

• Macroreplicated aluminum oxide

on a durable YF wt. cloth backing

• Use wet on zirconium, titanium,

carbon steel, stainless steel and other alloys

• Long belt life improves productivity

• Reduce or eliminate belt break-in

• Consistent cut rate and finish from heavy

deburring and defect removal to intermediate finishing

UPC Grade W x L Min./Case

051135-98214-3 A30

Belt sizes made to order.

Specify UPC, grade and

belt size (W" x L").

Belts wider than 25"

require multiple splices.

Determined

by belt size.

051135-98213-6 A45

051135-98212-9 A65

051135-98211-2 A100

051135-98210-5 A160

051135-98209-9 A300

Abrasive Belt Systems

3M™ Trizact™ Abrasive Belts

3M™ Trizact™ 407EA

• Use for mill line removal,

intermediate scratch refinement,

consistent dimensioning and

consistent finishing applications

• Silicon carbide constructed on

a flexible rayon cloth backing

• Grinding aid for cooler grinding

• Resin bonded for heat resistance

UPC Grade W x L Min./Case

051135-91841-8 A20 Belt sizes made to order.

Specify UPC, grade and

belt size (W" x L").

Belts wider than 25"

require multiple splices.

Determined

by belt size.

051144-99004-7 A60

051144-99005-4 A90

051135-90527-2 A110

3M™ Trizact™ Belts 953FA

• Use in wet centerless or flat

grinding and finishing operations

• Process flexible belt that

delivers consistent,

predictable results

• Macroreplicated ceramic

abrasive grain coated on

waterproof cloth backing

UPC Grade W x L Min./Case

051135-29383-6 A6

Belt sizes made to order.

Specify UPC, grade and

belt size (W" x L").

Belts wider than 25"

require multiple splices.

Determined

by belt size.

051135-29507-6 A10

051135-29382-9 A16

051135-29381-2 A30

051135-29380-5 A45

051135-29379-9 A65

051135-29378-2 A80

051135-29377-5 A100

051135-29375-1 A160

051135-29373-7 A300

3M™ Trizact™

Cloth Belts 463FC

• Wet centerless/flat

part/finishing/polishing

• Macroreplicated silicon carbide

on a durable YF wt. cloth backing

• Use wet on zirconium, titanium, carbon

steel, stainless steel and other alloys

• Long belt life improves productivity

• Reduce or eliminate belt break-in

• Consistent finer grade ranges

for fine finishes on all metals

UPC Grade W x L Min./Case

051135-98191-7 A6 Belt sizes made to order.

Specify UPC, grade and

belt size (W" x L").

Belts wider than 25"

require multiple splices.

Determined

by belt size.

051135-97955-6 A10

051135-97954-9 A20

051135-97953-2 A45

Abrasive Belt Systems

3M™ Trizact™ Abrasive Belts

Select the Right Belt for Your Job

Choose from 302D, 332D and 341D depending upon backing

flexibility needed for application as illustrated below:

Tech Tip

Contour Surface

More Flexible

Flat Surface

More Durable

Shaped Part

302D 332D 341D

241E

• Aluminum oxide on an

XE wt. cloth backing

• High strength backing for

tougher applications

• Use with 3M™ File Belt Sander

UPC W x L Grade Min./Case

051144-26733-0 1/4" x 24" 60 50/200

051144-26732-3 1/4" x 24" 80 50/200

051144-26731-6 1/4" x 24" 120 50/200

051144-31170-5 1/2" x 12" 60 50/200

051144- 26894-8†1/2" x 12" 80 50/200

051144- 26892-4†1/2" x 12" 120 50/200

051144-72227-3†1/2" x 18" 60 50/200

051144-72228-0 1/2" x 18" 80 50/200

051144-72229-7†1/2" x 18" 120 50/200

051144-26725-5†1/2" x 24" 50 50/200

051144-26723-1 1/2" x 24" 60 50/200

051144-26720-0 1/2" x 24" 80 50/200

051144-26719-4 1/2" x 24" 100 50/200

051144-26717-0†1/2" x 24" 120 50/200

051144-26715-6 1/2" x 24" 180 50/200

051144-26714-9 1/2" x 24" 220 50/200

051144-14756-4 3/4" x 18" 60 50/200

051144-14519-5 3/4" x 18" 80 50/200

051144-14667-3 3/4" x 18" 120 50/200

† Made-to-Order

302D

• Aluminum oxide mineral

• Flexible belt for blending

and finishing contoured

and complex parts

• Works great on most metals

• For use on backstand grinders

• Grades 60, 80, P100–P600

UPC W x L Grade Min./Case

051141-30867-8 2" x 118" P120 25/50

051141-30870-8 2" x 118" P150 25/50

051141-30873-9 2" x 118" P180 25/50

051141-30876-0 2" x 118" P220 25/50

051141-30885-2 2" x 118" P320 25/50

051141-30888-3 2" x 118" P400 25/50

051141-30710-7 2" x 132" 80 25/50

051141-30713-8 2" x 132" P100 25/50

051141-30716-9 2" x 132" P120 25/50

051141-30719-0 2" x 132" P150 25/50

051141-30722-0 2" x 132" P180 25/50

051141-30725-1 2" x 132" P220 25/50

051141-30728-2 2" x 132" P240 25/50

051141-30734-3 2" x 132" P320 25/50

051141-30737-4 2" x 132" P400 25/50

051141-30743-5 2" x 132" P600 25/50

051141-30862-3 3" x 118" 80 25/50

051141-30865-4 3" x 118" P100 25/50

051141-30874-6 3" x 118" P180 25/50

051141-30877-7 3" x 118" P220 25/50

051141-30886-9 3" x 118" P320 25/50

051141-30780-0 3" x 132" 60 25/50

051141-30711-4 3" x 132" 80 25/50

051141-30714-5 3" x 132" P100 25/50

051141-30717-6 3" x 132" P120 25/50

051141-30720-6 3" x 132" P150 25/50

051141-30723-7 3" x 132" P180 25/50

051141-30726-8 3" x 132" P220 25/50

051141-30729-9 3" x 132" P240 25/50

051141-30732-9 3" x 132" P280 25/50

051141-30735-0 3" x 132" P320 25/50

051141-30738-1 3" x 132" P400 25/50

051141-30741-1 3" x 132" P500 25/50

Abrasive Belt Systems

3M™ Belts

341D (cont.)

UPC W x L Grade Min./Case

051144-26571-8 2" x 48" 36 10/50

051144-26568-8 2" x 48" 50 10/50

051144-26564-0 2" x 48" 60 25/50

051144-26562-6 2" x 48" 80 25/50

051144-26561-9 2" x 48" P100 25/50

051144-26560-2 2" x 48" P120 25/50

051144-26424-7 2" x 60" 50 10/50

051144-33640-1 2" x 60" 60 25/50

051144-33639-5 2" x 60" 80 25/50

051144-33667-8 2" x 60" P120 25/50

051144-26320-2 2" x 72" 36 10/50

051144-26316-5 2" x 72" 60 25/50

051144-33067-6 2" x 72" 80 25/50

051144-26312-7 2" x 72" P120 25/50

051144-26309-7 2" x 72" P180 25/50

051144-81752-8 2" x 72" P240 25/50

051144-26408-7 2-1/2" x 60" 36 10/50

051144-26400-1 2-1/2" x 60" 60 25/50

051144-26396-7 2-1/2" x 60" 80 25/50

051144-26388-2 2-1/2" x 60" P120 25/50

051144-26857-3 3-1/2" x 15-1/2" 60 10/50

051144-26856-6 3-1/2" x 15-1/2" 80 10/50

891040-02663-0 3-1/2" x 15-1/2" P120 10/50

891040-01436-1 4" x 24" 36 25

891040-01439-2 4" x 24" 60 50

891040-01440-8 4" x 24" 80 50

051144-33647-0 4 " x 132 " 60 25

891040-01454-5 6" x 48" 36 10/20

891040-01455-2 6" x 48" 40 10/20

891040-01456-9 6" x 48" 50 10/20

891040-01457-6 6" x 48" 60 10/20

891040-10454-3 6" x 48" 80 20

891040-10455-0 6" x 48" P100 20

891040-10456-7 6" x 48" P120 20

051144-26517-6 6" x 48" P150 20

051144-26515-2 6" x 48" P180 20

051144-26513-8 6" x 48" P240 20

051144-74271-4 37" x 60" P120 5

051144-14420-4 37" x 75" 80 3

051144-33061-4 37" x 75" P120 5

051144-14508-9 37" x 75" P180 5

332D

• Aluminum oxide mineral

• Semi-flexible X wt. backing

provides good durability when

working on contoured parts

• For use on backstand grinders

• Works great on most metals

• Grades 60, 80, P100–P400

UPC W x L" Grade Min./Case

051141-30776-3 2" x 132" 60 25/50

051141-30746-6 2" x 132" 80 25/50

051141-30749-7 2" x 132" P100 25/50

051141-30752-7 2" x 132" P120 25/50

051141-30758-9 2" x 132" P180 25/50

051141-30761-9 2" x 132" P220 25/50

051141-30764-0 2" x 132" P240 25/50

051141-30770-1 2" x 132" P320 25/50

051141-30750-3 3" x 132" P100 25/50

051141-30753-4 3" x 132" P120 25/50

051141-30756-5 3" x 132" P150 25/50

051141-30759-6 3" x 132" P180 25/50

051141-30762-6 3" x 132" P220 25/50

051141-30765-7 3" x 132" P240 25/50

051141-30768-8 3" x 132" P280 25/50

341D

• Aluminum oxide on

an X wt. cloth backing

• Excellent all-around

abrasive belt for

blending and finishing

• For use on backstand,

benchtop, stroke sanding, slack of belt and dry flat finishing equipment

UPC W x L Grade Min./Case

051144-26614-2 1" x 42" 36 50/200

051144-31823-0 1" x 42" 50 50/200

891040-01450-7 1" x 42" 60 25/100

891040-01451-4 1" x 42" 80 25/100

891040-01452-1 1" x 42" P100 25/100

891040-01453-8 1" x 42" P120 25/100

051144-26602-9 1" x 42" P150 50/200

051144-26601-2 1" x 42" P180 50/200

051144-26599-2 1" x 42" P240 50/200

051144-26597-8 1" x 42" P320 50/200

051144-26443-8 1-1/2" x 60" 36 10/50

051144-26441-4 1-1/2" x 60" 40 10/50

051144-26438-4 1-1/2" x 60" 60 25/50

051144-26436-0 1-1/2" x 60" 80 25/50

Abrasive Belt Systems

3M™ Belts

577F

• Alumina zirconia

on a YF wt.

cloth backing

• Resin bonded for

heat resistance

• Features a grinding aid for cooler grinding

• For use on backstand, benchtop, slack

of belt, portable, flat finishing, centerless

and roll grinding equipment

• Can be run wet or dry

UPC W x L Grade Min./Case

051141-30690-2 1/4" x 18" 60 50/200

051141-30691-9 1/4" x 18" 80 50/200

051141-30708-4 1/4" x 18" 120 50/200

051141-30694-0 1/4" x 24" 60 50/200

051119-05580-1 1/4" x 24" 80 50/200

051141-30695-7 1/4" x 24" 120 50/200

051111-68668-3 1/2" x 12" 60 50/200

051111-68695-9 1/2" x 12" 80 50/200

051141-30709-1 1/2" x 12" 120 50/200

051141-30686-5 1/2" x 18" 36 50/200

051119-63081-7 1/2" x 18" 60 50/200

051119-82035-5 1/2" x 18" 80 50/200

051141-30689-6 1/2" x 18" 120 50/200

051141-30693-3 1/2" x 24" 36 50/200

051111-68669-0 1/2" x 24" 60 50/200

051111-68696-6 1/2" x 24" 80 50/200

051111-69436-7 1/2" x 24" 120 50/200

051141-30687-2 3/4" x 18" 36 50/200

051115-19553-2 3/4" x 18" 60 50/200

051125-19076-3 3/4" x 18" 80 50/200

051141-30688-9 3/4" x 18" 120 50/200

051125-16745-1 3/4" x 20-1/2" 60 50/200

051111-68697-3 3/4" x 20-1/2" 80 50/200

051125-22333-1 3/4" x 20-1/2" 120 50/200

051119-71425-8 1" x 18" 60 50/200

051125-23878-6 1" x 18" 80 50/200

051141-30692-6 1" x 18" 120 50/200

051115-19554-9 2" x 48" 60 25/50

051119-05579-5 2" x 48" 80 25/50

051125-11238-3 2" x 48" 120 25/50

051141-30699-5 2" x 60" 36 25/50

051111-69103-8 2" x 60" 60 25/50

051141-30703-9 2" x 60" 80 25/50

051141-30704-6 2" x 60" 120 25/50

051141-30698-8 2" x 72" 36 25/50

051111-69104-5 2" x 72" 60 25/50

051141-30701-5 2" x 72" 80 25/50

051141-30697-1 2" x 72" 120 25/50

361F

• Aluminum oxide on

an XF wt. backing

• Durable belt with a

tough polyester backing that can be used wet or dry

• Ideal use in the grinding of sheets and coils, centerless,

flat finishing and hand tool applications

UPC W x L Grade Min./Case

051111-67159-7†4" x 90" P180 50

051111-67179-5†4" x 90" P320 50

051111-68840-3†8" x 135" P150 20

051111-68841-0†8" x 135" P180 20

051119-84596-9†6" x 90" 60 20

051115-27707-8†6" x 90" P220 20

051125-09948-6†8" x 135" P320 20

051144-14773-1 37" x 60" 80 2

051144-14905-6 37" x 60" P100 5

051144-11519-8 37" x 60" P120 5

051144-76939-1 37" x 60" P150 5

051144-11515-0 37" x 60" P180 5

051144-76923-0 37" x 60" P220 5

051144-81215-8 37" x 75" P100 5

051144-76942-1†37" x 75" P120 5

051144-80037-7 37" x 75" P150 5

051111-51215-9 37" x 75" P180 5

† Made-to-Order

461F

• Silicon carbide mineral

• Durable cloth-backed belts

• For heavy duty grinding

to fine finishing

• Resistant to tearing

and will not easily nick

• For use on backstand,

benchtop, slack of belt, flat finishing,

centerless and wet roll grinding equipment

UPC W x L Grade Min./Case

051111-67404-8†4" x 118" P220 50

051111-67405-5†4" x 132" P220 50

051111-67408-6†4" x 132" P320 50

051125-23665-2†4" x 64" P400 50

051125-67387-4 4" x 106" P100 5/5

051144-04337-8 4" x 106" P80 5/5

051144-04335-4†4" x 106" P120 50

† Made-to-Order

Abrasive Belt Systems

3M™ Belts

577F (cont.)

UPC W x L Grade Qty./Case

051111-67602-8 2" x 132" 36 25/50

051141-30702-2 2" x 132" 50 25/50

051111-69105-2 2" x 132" 60 25/50

051111-69108-3 2" x 132" 80 25/50

051141-30696-4 2" x 132" 120 25/50

051119-64999-4 2-1/2" x 60" 36 25/50

051111-69106-9 2-1/2" x 60" 60 25/50

051125-12707-3 2-1/2" x 60" 80 25/50

051141-30706-0 2-1/2" x 60" 120 25/50

051111-69099-4 3" x 132" 36 25/50

051119-82066-9 3" x 132" 50 25/50

051111-69569-2 3" x 132" 60 25/50

051111-69571-5 3" x 132" 80 25/50

051111-67681-3 3" x 132" 120 25/50

051119-67701-0†3-1/2" x 15-1/2" 60 50

051119-58968-9†3-1/2" x 15-1/2" 80 50

051119-67700-3†3-1/2" x 15-1/2" 120 50

051111-67604-2 4" x 132" 36 25

051115-27562-3 4" x 132" 50 25

051111-69570-8 4" x 132" 60 25

051111-69573-9 4" x 132" 80 25

051125-23987-5 4" x 132" 120 25

051111-69445-9 6" x 48" 60 20

051119-83855-8 6" x 48" 80 20

051141-30707-7 6" x 48" 120 20

051111-69440-4 37" x 60" 36 2

051111-68691-1 37" x 60" 60 2

051111-69111-3 37" x 60" 80 2

051111-69115-1 37" x 60" 120 5

051125-22740-7 37" x 60" 180 5

051119-61101-4 37" x 75" 36 2

051111-68692-8 37" x 75" 60 2

051111-69112-0 37" x 75" 80 2

051111-67688-2 37" x 75" 120 5

051125-09283-8 37" x 75" 180 5

† Made-to-Order

747D

• 3M ceramic aluminum

oxide blend abrasive grain

on an X wt. cloth backing

• Use for offhand heat sensitive

stainless steel applications

• Grinding aid enhances performance on

stainless steel and other exotic alloys

• Well suited for stroke sanding applications

UPC W x L Grade Qty./Case

051111-67749-0†3" x 9-1/2" 50 200

051111-67759-9†3" x 9-1/2" 60 200

051111-67789-6†3" x 9-1/2" P100 200

051111-67806-0†3" x 9-1/2" P120 200

051111-67807-7†3" x 118" P120 50

051115-27355-1†3" x 132" 60 50

051111-68923-3†3" x 132" P120 50

051111-67751-3†6" x 264" 50 10

051111-67766-7†6" x 264" 60 10

051111-67778-0†6" x 264" 80 20

051125-20535-1†6" x 264" P100 20

051111-67812-1†6" x 264" P120 20

051144-85846-0†6" x 274" 60 20

051111-67779-7†6" x 274" 80 20

051111-67767-4†6" x 300" 60 10

051111-67781-0†6" x 300" 80 20

051111-67813-8†6" x 300" P120 20

051115-19560-0†6" x 355" 50 10

051111-67755-1†6" x 360" 50 10

† Made-to-Order

Abrasive Belt Systems

3M™ Belts

777F

• 3M ceramic aluminum

oxide blend abrasive grain

on a YF wt. cloth backing

• Contains grinding aid which

enhances performance on

stainless steel and other

exotic alloys

• For use on backstand, benchtop, flat finishing,

slack of belt, centerless and dry roll grinding equipment

• Can be run wet or dry

UPC W x L Grade Qty./Case

051144-84403-6 1/4" x 18" 60 200

051144-85318-2 1/4" x 18" 80 200

051144-19579-2 1/4" x 18" P120 200

051144-84412-8 1/4" x 24" 40 200

051144-80253-1 1/4" x 24" 60 200

051144-77642-9 1/4" x 24" 80 200

051144-82229-4 1/4" x 24" P120 200

051111-69457-2 1/2" x 12" 60 200

051144-85372-4 1/2" x 12" 80 200

051111-69604-0 1/2" x 12" P120 200

777F (cont.)

UPC W x L Grade Qty./Case

051144-84301-5 1/2" x 18" 36 200

051144-84409-8 1/2" x 18" 40 200

051144-80551-8 1/2" x 18" 60 200

051144-80232-6 1/2" x 18" 80 200

051144-84304-6 1/2" x 18" P120 200

051144-77643-6 1/2" x 24" 36 200

051144-82342-0 1/2" x 24" 40 200

051144-77408-1 1/2" x 24" 50 200

051144-77065-6 1/2" x 24" 60 200

051144-77491-3 1/2" x 24" 80 200

051144-81064-2 1/2" x 24" P120 200

051144-84302-2 3/4" x 18" 36 200

051144-84404-3 3/4" x 18" 60 200

051144-77992-5 3/4" x 18" 80 200

051144-84303-9 3/4" x 18" P120 200

051144-80486-3 3/4" x 20-1/2" 60 200

051144-80686-7 3/4" x 20-1/2" 80 200

051125-23897-7 1" x 18" 60 200

051144-85319-9 1" x 18" 80 200

051141-30705-3 1" x 18" P120 200

051144-76527-0 1" x 42" 40 50/200

051144-77512-5 1" x 42" 60 50/200

051144-14895-0 1" x 42" 80 50/200

051144-84416-6 1-1/2" x 60" 60 25/50

051144-76731-1 1-1/2" x 60" 80 25/50

051144-82022-1 1-1/2" x 60" P120 25/50

051144-76738-0 2" x 48" 36 10/50

051144-76519-5 2" x 48" 60 25/50

051144-14896-7 2" x 48" 80 25/50

051144-85393-9 2" x 48" P120 50

051144-77663-4 2" x 60" 36 50

051144-77152-3 2" x 60" 60 50

051144-84296-4 2" x 60" 80 50

051144-85377-9 2" x 60" P120 50

051144-76531-7 2" x 72" 36 50

051144-80286-9 2" x 72" 60 50

051144-14884-4 2" x 72" 80 50

051144-81767-2 2" x 72" P120 50

051144-14264-4 2" x 132" 36 50

051144-14899-8 2" x 132" 50 50

051144-82231-7 2" x 132" 60 50

051144-14534-8 2" x 132" 80 50

051144-81687-3 2" x 132" P120 50

051144-84315-2 2" x 132" P180 50

051144-76532-4 2-1/2" x 60" 36 50

051144-77825-6 2-1/2" x 60" 40 50

051144-76680-2 2-1/2" x 60" 60 50

051144-76686-4 2-1/2" x 60" 80 50

051115-27389-6 2-1/2" x 60" P120 50

777F (cont.)

UPC W x L Grade Qty./Case

051144-76533-1 3" x 132" 36 25

051111-69455-8 3" x 132" 50 25

051144-76520-1 3" x 132" 60 25

051144-76514-0 3" x 132" 80 25

051144-80028-5 3" x 132" P120 50

051144-85762-3 3" x 132" P180 50

051144-77336-7 3-1/2" x 15-1/2" 36 50

051144-77334-3 3-1/2" x 15-1/2" 50 50

051144-77476-0 3-1/2" x 15-1/2" 60 50

051144-77333-6 3-1/2" x 15-1/2" 80 50

051144-84306-0 3-1/2" x 15-1/2" 100 50

051144-84307-7 3-1/2" x 15-1/2" P120 50

051144-85320-5 3-1/2" x 15-1/2" P180 50

051144-76534-8 4" x 132" 36 25

051111-67851-0 4" x 132" 50 25

051144-80707-9 4" x 132" 60 25

051144-76515-7 4" x 132" 80 25/50

051141-30700-8 4" x 132" P120 25

051144-82313-0 6" x 48" 36 10/20

051144-80176-3 6" x 48" 50 10/20

051144-76679-6 6" x 48" 60 20

051144-76733-5 6" x 48" 80 20

051144-82153-2 6" x 48" P120 20

051125-33828-8 37" x 60" 36 2

051115-27354-4 37" x 60" 60 2

051144-77351-0 37" x 60" 80 2

051144-80450-4 37" x 60" P120 5

051111-69127-4 37" x 60" P180 5

051119-75481-0 37" x 75" 36 2

051111-69122-9 37" x 75" 60 2

051144-82930-9 37" x 75" 80 2

051144-84947-5 37" x 75" P120 5

051111-69128-1 37" x 75" P180 5

Abrasive Belt Systems

3M™ Belts

963G

• 3M ceramic

abrasive grain

on a YN wt.

cloth backing

• Water-resistant polyester cloth

backing for heavy grinding

• For coarse grade power grinding

• Can be run wet or dry

UPC W x L Grade Qty./Case

051144-74228-8†2" x 132" 24 50

051111-68163-3 2" x 132" 60 50

051144-74229-5†3" x 132" 24 25

051144-74207-3 3" x 132" 36 L-flex 25

051144-74324-7 3" x 132" 60 25

051144-13715-2 3" x 132" 80 L-flex 25

051111- 68109-1†4" x 132" 24 25

051144-74209-7 4" x 132" 36 25

051144-74330-8 4" x 132" 40 25

051144-74325-4 4" x 132" 60 25

051144-84491-3†6" x 132" 36 10

051111-68168-8†6" x 132" 60 20

† Made-to-Order

966F

• 3M ceramic abrasive grain

on a YF wt. cloth backing

• Water-resistant polyester

cloth backing

• Resin bonded for heat resistance

• Designed for wet centerless grinding applications

on carbon steel, heat sensitive high

nickel alloys, titanium and stainless steel

• Ideal for stripping chrome

from old parts

UPC W x L Grade Qty./Case

051119-09003-1†3" x 132" 36 25

051119-78104-5 4" x 132" 36 25

051119-10654-1†4" x 132" 80 25

051119-78105-2†4" x 132" 80 sine 25

051115-27128-1 4" x 132" 60 25

051111-68321-7†9" x 120" 36 10

051115-27315-5 9" x 120" 50 10

051125-14381-3 9" x 120" 60 10

051111-68326-2†9" x 120" 80 10

051115-27404-6†9" x 120" 80 L-flex 20

051125-12989-3†12 x 144" 40 5

051115-27990-4 12 x 144" 50 5

051119-83152-8†12 x 144" 60 5

051135-13609-6

Belt sizes

made to order.

Specify UPC,

grade and belt

size (W" x L")

Determined

by belt size.

051135-13660-7 36

051135-13684-3 40

051135-13683-6 50

051135-13682-9 60

051135-13681-2 80

† Made-to-Order

Abrasive Belt Systems

3M™ Belts

Keep Things Cool

When working on heat sensitive alloys like stainless steel, nickel alloys

and cobalt alloys, choose a product with a grinding aid.

Tech Tip

Backing

Flexible Durable

J wt. X wt. Y wt.

Life

Cut Rate

Mineral

A/O

Precision Shaped

Ceramic

977F

• 3M ceramic abrasive grain

on a YF wt. cloth backing

• Recommended for both

wet or dry grinding of stainless

steel and high nickel alloys

• For use on file belt and inline sanders, as well

as centerless and dry roll grinding equipment

• Works well in all grinding pressures

UPC W x L Grade Qty./Case

051111-68989-9†1" x 11" 60 500

051111-68602-7†1" x 11" 80 500

051111-68527-3†1" x 42" 40 200

051115-27684-2†1" x 42" 120 200

051111-68530-3†1" x 132" 40 100

051111-68548-8†1" x 132" 50 100

051111-68583-9†1" x 132" 60 200

051115-27336-0†1" x 132" 80 200

051111-68532-7†2" x 48" 40 50

051119-09500-5†2" x 48" 60 50

051144-85389-2 2" x 72" 36 50

051111-69519-7†2" x 72" 40 50

051111-68552-5†2" x 72" 50 50

051144-85383-0 2" x 72" 60 50

051144-84008-3 2" x 72" 80 50

051111-69514-2 2" x 72" 120 50

051111-68534-1†2" x 118" 40 L-flex 50

051111-68535-8†2" x 118" 40 50

051144-83522-5 2" x 132" 36 50

051111-68537-2†2" x 132" 40 50

051144-85015-0 2" x 132" 50 50

051144-85384-7 2" x 132" 60 50

051144-85769-2 2" x 132" 80 50

051111-68631-7†2" x 132" 100 50

051111-68640-9†2" x 132" 120 50

051111-68485-6†3" x 132" 24 25

051111-68506-8†3" x 132" 36 L-flex 25

051111-68507-5†3" x 132" 36 25

051144-82798-5 3" x 132" 40 25

051111-68557-0†3" x 132" 50 L-flex 25

051111-69165-6†3" x 132" 50 25

051111-69166-3†3" x 132" 60 25

051119-08175-6†3" x 132" 60 full flex 25

051144-85378-6 3" x 132" 80 25

051119-77855-7†3" x 132" 100 50

051111-68645-4†3" x 132" 120 50

051111-69522-7†3-1/2" x 15-1/2" 60 50

051125-18646-9†3-1/2" x 15-1/2" 80 50

051125-23841-0†3-1/2" x 15-1/2" 100 50

051111-68593-8†4" x 90" 60 50

051125-10597-2†4" x 90" 80 50

051125-11234-5†4" x 90" 120 50

† Made-to-Order

977F (cont.)

UPC W x L Grade Qty./Case

051144-85390-8†4" x 132" 36 L-flex 25

051111-68511-2†4" x 132" 36 25

051119-65751-7†4" x 132" 40 25

051125-15945-6†4" x 132" 40 full flex 25

051111-69351-3†4" x 132" 50 25

051111-69352-0†4" x 132" 50 L-flex 25

051115-27540-1†4" x 132" 60 25

051111-68594-5†4" x 132" 60 L-flex 25

051111-68619-5†4" x 132" 80 25

051144-85387-8†6" x 132" 40 L-flex 20

051125-17018-5†6" x 132" 40 full flex 20

051111-68518-1†6" x 132" 36 sine 10

051115-19611-9†6" x 132" 36 film 10

051111-68596-9†6" x 132" 60 20

051115-27541-8†6" x 132" 80 20

051111-68524-2†8" x 132" 36 20

051111-68597-6†8" x 132" 60 20

† Made-to-Order

Abrasive Belt Systems

3M™ Belts

Scotch-Brite™ Surface Conditioning Belt Selection Guide

Metal Type Performance

Application

Blending Deburring Finishing Cleaning

Stainless Steel, Carbon Steel,

Titanium, Nickel Alloy

Good SE SC SE SE

Better SC, SL DF, SL SC, SL DF, SL

Best DF, LGB SE, LGB DF SC

Aluminum, Copper,

Brass (Soft Metals),

Non-Ferrous Metals

Good DF, LGB DF, LGB DF DF

Better SC SC SC SC

Best PD PD PD PD

Scotch-Brite™ Surface Conditioning Belts

The easiest way to a perfect finish. Choose Scotch-Brite™ Surface Conditioning Belts for cleaning, finishing, blending and

deburring. The reinforced backing offers good flexibility whether working on a file belt or backstand. The non-woven material

combined with abrasive grain is an ideal way to add a great finish or remove burrs without gouging or undercutting the work

piece. Trust Scotch-Brite™ Belts to deliver fantastic finishes.

SCOTCH-BRITE™ BELTS RECOMMENDED OPERATING SPEEDS

Application Recommended SFPM

Decorative Finishing 500–3,000 SFPM

Deburring 5,000–6,500 SFPM

Cleaning and Conditioning 2,000–5,000 SFPM

Oxide Removal 4,500–6,500 SFPM

Maximum Operating Speed: 6,500 SFPM SFPM = Surface Feet Per Minute

Scotch-Brite™ Surface Conditioning Belt Availability Guide

3M ID Backing

SD CRS

(Super Duty)

HD CRS

(Heavy Duty) A CRS A MED A FIN A VFN SFN

DF Low Stretch • • •

Scrim • • • •

Low Stretch • • • •

Film Backed • • • •

Scrim • • •

Low Stretch • • •

Film Backed • •

Scrim • •

Low Stretch •

Film Backed •

Scrim • • • •

Low Stretch

Film Backed

LGB

Scrim

Low Stretch • •

Film Backed

Legend

DF = DF Surface Conditioning Belts SC = SC Surface Conditioning Belts SL = SL Surface Conditioning Belts

PD = PD Surface Conditioning Belts SE = SE Surface Conditioning Belts LGB = Light Grinding and Blending Belts

Performance

Flexibility

Least

Flexible

Most

Flexible

PD SC DFSE SLLGB

Durability

Resistant to

Dulling

and Loading

Resistant to

Wear and

Sharp Edges

PD SC DF SESL LGB

Abrasive Belt Systems

Scotch-Brite™ SC Surface Conditioning Belts (cont.)

UPC W x L Grade Color Qty./Case

048011-14278-4 1" x 18" A CRS Brown 10

048011-14398-9†1" x 18" A MED Maroon 10

048011-17517-1†1" x 18" A VFN Blue 10

048011-04189-6 1" x 42" A MED Maroon 10

048011-04190-2 1" x 42" A VFN Blue 10

048011-08913-3†1" x 132" A MED Maroon 5

048011-08915-7 2" x 48" A MED Maroon 10

048011-04295-4 2" x 48" A VFN Blue 10

048011-08883-9†2" x 72" A CRS Brown 10

048011-00580-5 2" x 72" A MED Maroon 10

048011-00579-9 2" x 72" A VFN Blue 10

048011-03999-2 2" x 132" A MED Maroon 5

048011-04297-8 2" x 132" A VFN Blue 5

048011-05022-5 2-3/4" x 15-1/2" A CRS Brown 10

048011-05227-4 2-3/4" x 15-1/2" A MED Maroon 10

048011-05820-7 3" x 10-11/16" A CRS Brown 10

048011-05783-5 3" x 10-11/16" A MED Maroon 10

048011-09650-6 3" x 10-11/16" A VFN Blue 10

048011-14284-5†3" x 18" A CRS Brown 10

048011-14285-2 3" x 18" A MED Maroon 10

048011-14550-1 3" x 18" A VFN Blue 10

048011-08880-8 3" x 24" A CRS Brown 10

048011-00583-6 3" x 24" A MED Maroon 10

048011-04298-5 3" x 24" A VFN Blue 10

048011-05023-2 3" x 132" A CRS Brown 5

048011-00568-3 3" x 132" A MED Maroon 5

048011-04289-3 3" x 132" A VFN Blue 5

048011-05016-4 3-1/2" x 15-1/2" A CRS Brown 10

048011-05228-1 3-1/2" x 15-1/2" A MED Maroon 10

048011-05643-2 3-1/2" x 15-1/2" A VFN Blue 10

048011-08882-2†4" x 24" A CRS Brown 10

048011-00585-0†4" x 24" A MED Maroon 10

048011-05018-8†4" x 132" A CRS Brown 5

048011-00570-6 4" x 132" A MED Maroon 5

048011-04281-7 4" x 132" A VFN Blue 5

048011-05019-5 6" x 48" A CRS Brown 5

048011-00590-4 6" x 48" A MED Maroon 5

048011-04283-1 6" x 48" A VFN Blue 5

† Made-to-Order

Scotch-Brite™ SE Surface

Conditioning Belt

• Coarse, tough, aggressive

non-woven belt for

heavy duty deburring

and finishing

• For use on backstand and off hand equipment

• Reinforced backing offers good flexibility

• Abrasive mineral: coarse grade aluminum oxide

• Color: Brown/blue

UPC W x L Grade Qty./Case

048011-18495-1 1/4" x 18" A CRS 20

048011-18496-8†1/4" x 24" A CRS 20

048011-18087-8 1/2" x 18" A CRS 20

048011-18088-5 1/2" x 24" A CRS 20

048011-19697-8 3/4" x 18" A CRS 20

048011-18089-2 3-1/2" x 15-1/2" A CRS 10

† Made-to-Order

Scotch-Brite™ SC Surface

Conditioning Belts

• Premium Scotch-Brite

surface conditioning

non-woven web

• Designed for

cleaning, finishing

and light deburring

• For use on portable,

benchtop and

backstand equipment

UPC W x L Grade Color Qty./Case

048011-13290-7†1/4" x 18" A CRS Brown 20

048011-14276-0 1/4" x 18" A MED Maroon 20

048011-13230-3†1/4" x 18" A VFN Blue 20

048011-13132-0 1/4" x 24" A CRS Brown 20

048011-13131-3 1/4" x 24" A MED Maroon 20

048011-13287-7 1/4" x 24" A VFN Blue 20

048011-08858-7 1/2" x 18" A CRS Brown 20

048011-08857-0 1/2" x 18" A MED Maroon 20

048011-08856-3 1/2" x 18" A VFN Blue 20

048011-05741-5 1/2" x 24" A CRS Brown 20

048011-03998-5 1/2" x 24" A MED Maroon 20

048011-04299-2 1/2" x 24" A VFN Blue 20

048011-13639-4 3/4" x 18" A CRS Brown 20

048011-15899-0 3/4" x 18" A MED Maroon 20

048011-14543-3 3/4" x 18" A VFN Blue 20

Scotch-Brite™ Surface Conditioning Belts

Attention: Belts are available in other grades and sizes. If you need a specific belt not listed, contact your 3M Sales Specialist or 3M Authorized Distributor.

Abrasive Belt Systems

Scotch-Brite™ Light

Grinding and Blending Belts

• A coarse, tough, aggressive non-woven

belt for heavy duty deburring and finishing

• Tough enough to grind

• Can grind and blend in single step

• Resist edge wear

• Long life

• Abrasive mineral: ceramic grain

UPC Grade Color W x L Qty./Case

048011-64687-9 HD

A CRS

Dark

Pink Belt sizes made to order.

Specify UPC, grade and

belt size (W" x L").

Determined

by belt size.

048011-64688-6 SD

A CRS

Dark

Blue

Scotch-Brite™ SL

Surface Conditioning Belt

• Durable non-woven abrasive belt

• Blends and finishes consistently,

often in one step

• Reduces loading

• Very forgiving

• Abrasive mineral: aluminum oxide

UPC Grade Color W x L Qty./Case

048011-64698-5 HD

A CRS

Dark

Brown Belt sizes made to order.

Specify UPC, grade and

belt size (W" x L").

Determined

by belt size.

048011-64606-0 SD

A CRS

Dark

Gray

Scotch-Brite™ Surface Conditioning Belts

Scotch-Brite™ Durable Flex (DF)

Surface Conditioning Belt

• Durable flex belt has great edge durability

• Aggressive and long lasting non-woven belt

for deburring, finishing, blending and cleaning

• The reinforced low-stretch backing offers good flexibility

UPC W x L Grade Color Qty./Case

048011-64472-1 1/4" x 18" A CRS Brown 20

048011-64455-4 1/4" x 18" A MED Maroon 20

048011-64464-6 1/4" x 18" A FIN Green 20

048011-64473-8 1/4" x 24" A CRS Brown 20

048011-64456-1 1/4" x 24" A MED Maroon 20

048011-64465-3 1/4" x 24" A FIN Green 20

048011-64474-5 1/2" x 12" A CRS Brown 20

048011-64457-8 1/2" x 12" A MED Maroon 20

048011-64466-0 1/2" x 12" A FIN Green 20

048011-64475-2 1/2" x 18" A CRS Brown 20

048011-64458-5 1/2" x 18" A MED Maroon 20

048011-64467-7 1/2" x 18" A FIN Green 20

048011-64476-9 1/2" x 24" A CRS Brown 20

048011-64459-2 1/2" x 24" A MED Maroon 20

048011-64468-4 1/2" x 24" A FIN Green 20

048011-64477-6 3/4" x 18" A CRS Brown 20

048011-64460-8 3/4" x 18" A MED Maroon 20

048011-64469-1 3/4" x 18" A FIN Green 20

048011-64489-9 2-3/4" x 15-1/2" A CRS Brown 10

048011-64482-0 2-3/4" x 15-1/2" A MED Maroon 10

048011-64486-8 3" x 10-11/16" A CRS Brown 10

048011-64480-6 3" x 10-11/16" A MED Maroon 10

048011-64488-2 3" x 18" A CRS Brown 10

048011-64483-7 3" x 18" A MED Maroon 10

048011-64484-4 3" x 18" A FIN Green 10

048011-64487-5 3" x 24" A CRS Brown 10

048011-64481-3 3" x 24" A MED Maroon 10

048011-64485-1 3" x 24" A FIN Green 10

048011-64479-0 3" x 132" A CRS Brown 5

048011-64462-2 3" x 132" A MED Maroon 5

048011-64471-4 3" x 132" A FIN Green 5

048011-64478-3 3-1/2" x 15-1/2" A CRS Brown 10

048011-64461-5 3-1/2" x 15-1/2" A MED Maroon 10

048011-64470-7 3-1/2" x 15-1/2" A FIN Green 10

Scotch-Brite™ PD

Surface Conditioning Belt

• Aluminum oxide abrasive mineral

• Open woven belt resistant

to loading on soft and/or

oily materials

• Reinforced backing offers good flexibility

UPC Grade Color W x L Qty./Case

048011-92126-6 A CRS Brown Belt sizes made to order.

Specify UPC, grade and

belt size (W" x L"). Belts

wider than 25" require

multiple splices.

Determined

by belt size.

048011-92125-9 A CRS Brown

048011-92127-3 A CRS Brown

048011-92259-1 A MED Maroon

Attention: Belts are available in other grades and sizes. If you need a specific belt not listed, contact your 3M Sales Specialist or 3M Authorized Distributor.

Abrasive Belt Systems

3M™ File Belt Arm Service Tool Kit

Part No. Description UPC Case Quantity

30670 Contains Wheel Positioning Block, Shaft Removal Tool, 2 Bearing Removal

Tools, Bearing Mount Tool, Bearing Tool and Retaining Compound 051141-30670-4 1

3M™ File Belt Sander Platen Pad Material

Part No. Size For Use With Description UPC Case Quantity

28377 1/2" x 7" x 1/8" 1/2" wide belts Soft 051141-28377-7 10

28378 3/4" x 7" x 1/8" 5/8" or 3/4" wide belts Soft 051141-28378-4 10

28379 1/2" x 7" x 1/8" 1/2" wide belts Hard 051141-28379-1 10

28380 3/4" x 7" x 1/8" 5/8" or 3/4" wide belts Hard 051141-28380-7 10

28381 1/2" x 7" x 1/32" 1/2" wide belts Thin 051141-28381-4 10

28382 3/4" x 7" x 1/32" 5/8" or 3/4" wide belts Thin 051141-28382-1 10

Abrasive Belt Systems

3M™ Power Tools for Abrasive Belt Systems

3M™ File Belt Sander and Kit*

• Ideally suited for use with 3M™ Abrasive Belts and

Scotch-Brite™ Belts for a variety of metalworking applications

• Grind and blend from contact wheel or platen finish and polish from slack of belt

• Provides access to hard-to-reach areas

• Eight different attachment arms available

Model No. Motor Max RPM

Belt Speed

SFPM (SMM)

Weight

Pound (kg)

Length

Inch (mm)

Height

Inch (mm)

Width

Inch (mm)

Airflow Rate

SCFM (LPM) UPC

28366 0.6 HP 22,000 4990 (1521) 2.8 (1.3) 14.57 (370) 2.93 (74.5) 5.95 (151.2) 28 (793) 051141-28366-1

28367 Kit includes Molded Case, File Belt Sander (PN28366) and two Attachment Arms (PNs 28368, 28370)* 051141-28367-8

*For file belt sander attachment arms, see page 67.

28366 28367

Accessories for Abrasive Belt Systems

3M™ Match and Finish Sander

• Generate straight-line scratches for finishing stainless steel and other metals

• Front to back motion helps prevent curved scratches

• Easy to control for reduced start/stop marks

• Easy screw-on/screw-off attachments

• Design for use with Scotch-Brite™ Match and Finish Flap Brushes, 3M™ Abrasive Belts or Scotch-Brite™ Belts*

Model No.

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm) Air Inlet Thread

Airflow Rate

SCFM (LPM) Shaft Size UPC

28659 1 (744) 3,500 4.6 (2.1) 13.5 (343) 1/4" NPT 37 (1,048) 5/8"–11 EXT 051141-28659-4

*To run belt products, 3M™ Expander Wheel (28718) and Adapter Kit (28719) are required. See page 68.

28659

3M™ Inline Sanders

• Generate straight-line scratches for finishing stainless steel and other metals

• Can be used with inflatable or slotted wheel accessories and many other wheel products

Model No.

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm) Air Inlet Thread

Airflow Rate

SCFM (LPM) Shaft Size UPC

28338 1 (744) 1,600 3.32 (1.51) 9.88 (251) 1/4" NPT 37 (1,048) 5/8"–11 EXT 051141-28338-8

28339 1 (744) 3,500 2.64 (1.20) 8.50 (216) 1/4" NPT 37 (1,048) 5/8"–11 EXT 051141-28339-5

2833928338

Accessories for Abrasive Belt Systems

3M™ File Belt Attachment Arm Repair Kits

Kits contain: Contact wheel, bearing, shaft and platen pad if

applicable. 3M™ File Belt Arm Service Tool Kit (PN30670)

recommended for use with repair kits.

Attachment Arm Repair Kit Part No. For Use With Attachment Arm Part No.

30663 28368

30667 28369

30668 28370

30664 28371

30666 28372

30665 28373

30662 28374

30669 28375

Abrasive Belt Systems

3M™ File Belt Sander Attachment Arms

Part No. Use With Belt Size Description UPC Case Quantity

28368 1/2" x 18" Standard Style: Standard arm included with 3M™ File Belt

Sander (PN28366). Sand with contact wheel or platen. 051141-28368-5 1

28369 1/2" x 18" Thin Style: Thinner than standard arm.

Sand with contact wheel or platen. 051141-28369-2 1

28370

1/8" x 18"

1/4" x 18"

1/2" x 18"

Corners Style: Sand corners and grooves with

contact wheel. Accommodates three belt widths. 051141-28370-8 1

28371 5/8" x 18"

3/4" x 18"

Thick Standard Style: Thicker than standard arm. Sand with

contact wheel or platen. Accommodates two belt widths. 051141-28371-5 1

28372 1/8" x 18"

1/4" x 18"

Corners Style: Sand corners and grooves with

contact wheel. Accommodates two belt widths. 051141-28372-2 1

28373 5/8" x 20-1/2"

3/4" x 20-1/2"

20-1/2" Arm: Sand with contact wheel

or platen. Accommodates two belt widths. 051141-28373-9 1

28374 1/2" x 18" Curved Arm: Unique curved arm used for blending

flat areas. Sand with contact wheel or platen. 051141-28374-6 1

28375 1/4" x 24"

1/2" x 24"

Vessel Arm: Unique large arm used for blending

weld seams. Sand with 4" contact wheel. Includes

tracking/control knob. Accommodates two belt widths.

051141-28375-3 1

28376

Sander Extension: Use to extend arms

to 24" length. Can be used with same

attachment arm used for 18" length arms.

051141-28376-0 1

Product Name UPC Qty./Case For Use With Size/Description Max RPM

3M™ Rubber Slotted

Expander Wheels 051144-77717-4 1

Slotted wheels for

use with bands

1" x 1" x 1/4" 18,000

051144-77718-1 1 1-1/2" x 1" x 1/4" 14,000

051144-77720-4 1 2" x 1" x 1/4" 12,000

051144-77721-1 1 2" x 2" x 1/4" 6,000

051144-77722-8 1 3" x 3" x 5/8–INT 6,000

Use 3M™ Wheel Adapter Kits to mount wheel to inline sander

051141-28348-7 1 For use with belts

3-1/2" x 15-1/2" or

3" x 10-11/16"

5" x 3-1/2" 5/8" Arbor Hole 3,500

051141-28349-4 1 3-1/4" x 3" 5/8" Arbor Hole 3,500

3M™ Match and Finish Rubber

Slotted Expander Wheels

Use 3M™ Expander Wheel and Adapter Kit with 3M™ Match and Finish Sander

051141-28718-8 1 3-1/2" x 15-1/2" belts 5” x 3-1/2” x 1” AH 3,500

051141-27819-5 1 To mount 28718 wheel on

3M™ Match and Finish Sander 1” x 5/8–11 INT N/A

Rubber Cushion

Polishing Wheels 051144-45159-3 1

Use with bands when

creating fine finishes

1/4" x 1/2" x 1/8" 23,000

051144-45156-2 1 1/2" x 1/2" x 1/4" 30,000

051144-45153-1 1 1/2" x 1" x 1/4" 15,000

051144-45152-4 1 1/2" x 1-1/2" x 1/4" 15,000

051144-45145-6 1 3/4" x 1" x 1/4" 17,000

051144-45144-9 1 3/4" x 1-1/2" x 1/4" 10,000

051144-45139-5 1 1" x 1" x 1/4" 18,000

051144-45138-8 1 1" x 1-1/2" x 1/4" 10,000

051144-45132-6 1 1-1/2" x 1" x 1/4" 14,000

051144-45131-9 1 1-1/2" x 1-1/2" x 1/4" 10,000

051144-45130-2 1 1-1/2" x 2" x 1/4" 8,000

051144-45129-6 1 2" x 1" x 1/4" 11,000

051144-45127-2 1 2" x 2" x 1/4" 6,000

051144-45124-1 1 3" x 3" x 3/8" 3,000

051144-45123-4 1 3" x 3" x 1/2" 3,000

Abrasive Belt Systems

Accessories for Abrasive Belt Systems

Abrasive Wheel

Systems

For Deburring, Weld Blending,

Finishing and More!

Abrasive Wheel Systems

Scotch-Brite™ Convolute Wheels

Get high performance and durability in a variety of cleaning, deburring, finishing and polishing applications. Used on right angle

grinders and bench tools, Scotch-Brite™ Wheels produce great results on all types of metal, composites and glass.

Convolute Wheels Selection Guides

Scotch-Brite™ Convolute Wheel performance differences can be attributed to mineral (aggressiveness) and density (hardness).

The combination of these two characteristics and subtle variations determine if the wheel will cut more aggressively or will be

more durable and less conformable.

Scotch-Brite™ Convolute Wheel

Application

Cleaning Deburring Blending Finishing Polishing

3M General Deburring • •

EXL/EX2/EX3 Deburring •••

Metal Finishing • • •

Cut and Polish •••

Multi-Finishing • • •

Light Deburring • •

EXL-PRO Deburring •

Mineral Abbreviations (prefix to grade)

A — Aluminum Oxide mineral S — Silicon Carbide mineral

Density Number (prefix to mineral)

2 4 6 7 8 9 10 11

soft hard

Least Aggressive

Light Deburring Wheels (FIN)

General Deburring Wheel (9S FIN*)

EXL/EX2/EX3 Deburring Wheels (8S FIN*, 9S FIN*, A MED)

EXL-PRO Deburring Wheels (S FIN)

Multi-Finishing Wheels (FIN, MED, CRS)

Metal Finishing Wheels (MED, CRS)

Cut and Polish Wheels (VFN, FIN, MED, CRS)

Most Aggressive

*Numeric designators (8/9) represent mineral aggressiveness; not density.

Softest

Multi-Finishing Wheels (2, 3, 4)

Metal Finishing Wheels (4, 5, 6)

Light Deburring Wheels (6, 7, 8)

EXL-PRO Deburring Wheels (9, 10, 11)

General Deburring Wheel

EXL/EX2/EX3 Deburring Wheels

Cut and Polish Wheels (5, 7, 9)

Hardest

3M™ General Deburring Wheels

• Soft construction for better conformability

and more operator comfort

• For light or medium deburring, radiusing,

finishing and cleaning applications

• Great price-value for general purpose needs

• All wheels are stocked and available in single package quantities

UPC Dia. x W x CH Grade Max. RPM Qty./Case

048011-64899-6 6" x 1/2" x 1" 9S FIN 6,000 5

048011-64900-9 6" x 1" x 1" 9S FIN 6,000 5

048011-64901-6 8" x 1/2" x 3" 9S FIN 4,500 5

048011-64902-3 8" x 1" x 3" 9S FIN 4,500 5

Attention: Wheels are available in other grades and sizes. If you need a specific wheel not listed, contact your 3M Sales Specialist or 3M Authorized Distributor.

Scotch-Brite™ EXL-PRO

Deburring Wheels

• Optimized performance, particularly

in off-hand applications

• Longest life of any Scotch-Brite™ Deburring Wheel

• Smooth, even wear — helps control the workpiece

• More cut, with less pressure required — without sacrificing finish

• Easy to use, comfortable for operators

UPC Dia. x W x AH Grade Max. RPM Qty./Case

051125-94904-5 6" x 1/2" x 1" 9S FIN 6,000 4

051125-94905-2 6" x 1" x 1" 9S FIN 6,000 3

051125-94907-1 8" x 1/2" x 3" 9S FIN 4,500 4

051125-94908-8 8" x 1" x 3" 9S FIN 4,500 3

051125-94913-2 12" x 1" x 5" 9S FIN 3,000 1

051125-94914-9 12" x 2" x 5" 9S FIN 3,000 1

051125-94926-7 6" x 1/2" x 1" 10S FIN 6,000 4

051125-94917-0 6" x 1" x 1" 10S FIN 6,000 3

051125-94927-4 8" x 1/2" x 3" 10S FIN 4,500 4

051125-94918-7 8" x 1" x 3" 10S FIN 4,500 3

051125-94902-6 12" x 1" x 5" 10S FIN 3,000 1

Other sizes available in 9 and 10 densities.

Scotch-Brite™ EXL, EX2 and EX3 Deburring Wheels

(cont.)

UPC Size Grade Max. RPM Qty./Case

EXL (cont.)

048011-05137-6 10" x 1" x 5" 9S FIN 3,600 2

048011-15641-5 12" x 1/2" x 5" 8S FIN 3,000 2

048011-09005-4 12" x 1/2" x 5" 9S FIN 3,000 2

048011-13621-9 12" x 1" x 5" 8A MED 3,000 1

048011-18281-0 12" x 1" x 5" 8S MED 3,000 1

048011-09554-7 12" x 1" x 5" 8S FIN 3,000 1

048011-05138-3 12" x 1" x 5" 9S FIN 3,000 1

048011-13622-6 12" x 2" x 5" 8A MED 3,000 1

048011-09555-4 12" x 2" x 5" 8S FIN 3,000 1

048011-05139-0 12" x 2" x 5" 9S FIN 3,000 1

048011-13623-3 14" x 2" x 8" 8A MED 2,550 1

048011-05141-3 14" x 2" x 8" 9S FIN 2,550 1

EX2

048011-17215-6 6" x 1/2" x 1" 8A MED 6,000 4

048011-18285-8 6" x 1/2" x 1" 8S MED 6,000 4

048011-17216-3 6" x 1/2" x 1" 8S FIN 6,000 4

048011-24532-4 6" x 1/2" x 1" 9S FIN 6,000 4

048011-17217-0 6" x 1" x 1" 8A MED 6,000 3

048011-18286-5 6" x 1" x 1" 8S MED 6,000 3

048011-17218-7 6" x 1" x 1" 8S FIN 6,000 3

048011-18040-3 6" x 1" x 1" 9S FIN 6,000 3

048011-17426-6 8" x 1/2" x 3" 8A MED 4,500 4

048011-17425-9 8" x 1/2" x 3" 8S FIN 4,500 4

048011-17219-4 8" x 1" x 3" 8A MED 4,500 3

048011-17220-0 8" x 1" x 3" 8S FIN 4,500 3

048011-18365-7 8" x 1" x 3" 9S FIN 4,500 3

048011-17223-1 12" x 1" x 5" 8A MED 3,000 1

048011-17224-8 12" x 1" x 5" 8S FIN 3,000 1

EX3

048011-24026-8 6" x 1/2" x 1" 9S FIN 6,000 4

048011-18825-6 6" x 1" x 1" 9S FIN 6,000 3

048011-24527-0 8" x 1" x 3" 9S FIN 4,500 3

048011-18826-3 12" x 2" x 5" 9S FIN 3,000 1

Scotch-Brite™ EXL, EX2

and EX3 Deburring Wheels

• Versatile wheel offers reliable

performance and great value

• Full line of densities, grades and sizes

for any deburring or finishing application

• Use to clean, finish, blend, deburr or polish

all types of metals, composites and glass

UPC Size Grade Max. RPM Qty./Case

EXL

048011-13616-5 6" x 1/2" x 1" 8A MED 6,000 4

048011-09548-6 6" x 1/2" x 1" 8S FIN 6,000 4

048011-05790-3 6" x 1/2" x 1" 9S FIN 6,000 4

048011-13617-2 6" x 1" x 1" 8A MED 6,000 3

048011-18278-0 6" x 1" x 1" 8S MED 6,000 3

048011-09549-3 6" x 1" x 1" 8S FIN 6,000 3

048011-05132-1 6" x 1" x 1" 9S FIN 6,000 3

048011-13618-9 6" x 2" x 1" 8A MED 6,000 2

048011-05133-8 6" x 2" x 1" 9S FIN 6,000 2

048011-14791-8 8" x 3/8" x 3" 8S FIN 4,500 4

048011-17459-4 8" x 1/2" x 3" 8A MED 4,500 4

048011-14629-4 8" x 1/2" x 3" 8S FIN 4,500 4

048011-05791-0 8" x 1/2" x 3" 9S FIN 4,500 4

048011-13619-6 8" x 1" x 3" 8A MED 4,500 3

048011-18279-7 8" x 1" x 3" 8S MED 4,500 3

048011-09551-6 8" x 1" x 3" 8S FIN 4,500 3

048011-05135-2 8" x 1" x 3" 9S FIN 4,500 3

048011-13620-2 8" x 2" x 3" 8A MED 4,500 2

048011-09552-3 8" x 2" x 3" 8S FIN 4,500 2

048011-05136-9 8" x 2" x 3" 9S FIN 4,500 2

Abrasive Wheel Systems

Scotch-Brite™ Convolute Wheels for Deburring

Scotch-Brite™ Convolute Wheels for Finishing

Attention: Wheels are available in other grades and sizes. If you need a specific wheel not listed, contact your 3M Sales Specialist or 3M Authorized Distributor.

Abrasive Wheel Systems

Scotch-Brite™

Metal Finishing Wheels

• For decorative finishing and

blending of all metals

• Creates a consistent satin finish

• Good conformability

• Produces a coarser and duller finish than Light Deburring Wheels

• Removes minor imperfections and handling marks

UPC Size Grade Max. RPM Qty./Case

048011-05394-3†6" x 1/2" x 1" 6A CRS 6,000 4

048011-05391-2†6" x 1/2" x 1" 5A MED 6,000 4

048011-01861-4 6" x 1" x 1" 4A CRS 6,000 3

048011-01863-8 6" x 1" x 1" 5A CRS 6,000 3

048011-01866-9 6" x 1" x 1" 6A CRS 6,000 3

048011-01860-7†6" x 1" x 1" 4A MED 6,000 3

048011-01862-1 6" x 1" x 1" 5A MED 6,000 3

048011-01865-2 6" x 1" x 1" 6A MED 6,000 3

048011-30012-2†6" x 1" x 1-1/4" 5A CRS 6,000 3

048011-24110-4†6" x 1" x 1-1/4" 5A MED 6,000 3

048011-01868-3 6" x 2" x 1" 4A CRS 6,000 2

048011-01888-1 6" x 2" x 1" 5A CRS 6,000 2

048011-01870-6†6" x 2" x 1" 6A CRS 6,000 2

048011-01867-6 6" x 2" x 1" 4A MED 6,000 2

048011-01869-0 6" x 2" x 1" 5A MED 6,000 2

048011-01889-8†6" x 2" x 1" 6A MED 6,000 2

048011-01891-1†6" x 3" x 1" 4A CRS 6,000 1

048011-08891-4†6" x 4" x 1" 4A MED 6,000 1

048011-09118-1†6" x 6" x 1" 5A CRS 6,000 1

048011-14336-1†8" x 1/2" x 3" 5A CRS 4,500 4

048011-16449-6†8" x 1/2" x 3" 5A MED 4,500 4

048011-05414-8†8" x 1" x 3" 4A CRS 4,500 3

048011-01872-0 8" x 1" x 3" 5A CRS 4,500 3

048011-01901-7 8" x 1" x 3" 6A CRS 4,500 3

048011-08926-3†8" x 1" x 3" 4A MED 4,500 3

048011-01871-3 8" x 1" x 3" 5A MED 4,500 3

048011-01900-0†8" x 1" x 3" 6A MED 4,500 3

048011-92896-8†8" x 1-1/2" x 3" 5A CRS 4,500 2

048011-01875-1†8" x 2" x 3" 4A CRS 4,500 2

048011-01904-8 8" x 2" x 3" 5A CRS 4,500 2

048011-13453-6†8" x 2" x 3" 6A CRS 4,500 2

048011-01874-4 8" x 2" x 3" 4A MED 4,500 2

048011-01876-8 8" x 2" x 3" 5A MED 4,500 2

048011-01905-5†8" x 2" x 3" 6A MED 4,500 2

048011-15608-8†8" x 3" x 3" 5A CRS 4,500 1

048011-13451-2†8" x 3" x 3" 6A CRS 4,500 1

048011-13452-9†8" x 3" x 3" 4A MED 4,500 1

048011-05395-0†8" x 3" x 3" 5A MED 4,500 1

048011-25612-2†8" x 3" x 3" 6A MED 4,500 1

† Made-to-Order

Scotch-Brite™ Metal Finishing Wheels (cont.)

UPC Size Grade Max. RPM Qty./Case

048011-15607-1†12" x 1/2" x 5" 5A MED 3,000 2

048011-05398-1†12" x 1" x 5" 5A CRS 3,000 1

048011-15062-8†12" x 1" x 5" 6A CRS 3,000 1

048011-01916-1 12" x 1" x 5" 5A MED 3,000 1

048011-08924-9†12" x 1" x 5" 6A MED 3,000 1

048011-25619-1†12" x 1-1/4" x 5" 6A MED 3,000 1

048011-25621-4†12" x 1-1/2" x 5" 6A CRS 3,000 1

048011-15326-1†12" x 1-1/2" x 5" 5A MED 3,000 1

048011-09612-4†12" x 2" x 5" 4A CRS 3,000 1

048011-13449-9 12" x 2" x 5" 5A CRS 3,000 1

048011-13448-2†12" x 2" x 5" 6A CRS 3,000 1

048011-01921-5†12" x 2" x 5" 4A MED 3,000 1

048011-01882-9 12" x 2" x 5" 5A MED 3,000 1

048011-14617-1†12" x 2" x 5" 6A MED 3,000 1

048011-13446-8†12" x 3" x 5" 4A CRS 3,000 1

048011-08902-7†12" x 3" x 5" 5A CRS 3,000 1

048011-92916-3†12" x 3" x 5" 4A MED 3,000 1

048011-08929-4†12" x 3" x 5" 5A MED 3,000 1

048011-16422-9†12" x 3-1/2" x 5" 5A MED 3,000 1

048011-13445-1†12" x 4" x 5" 4A CRS 3,000 1

048011-13071-2†12" x 4" x 5" 5A CRS 3,000 1

048011-18634-4†12" x 4" x 5" 6A CRS 3,000 1

048011-25615-3†12" x 4" x 5" 4A MED 3,000 1

048011-05392-9†12" x 4" x 5" 5A MED 3,000 1

† Made-to-Order

Scotch-Brite™

Multi-Finishing Wheels

• For decorative, satin finishing

and blending of all metals

• Often used on inline sanding

tools for large surface repair

• Produces a bright finish with a wide scratch pattern

• Optimum conformability

UPC Dia. x W x AH Grade Max. RPM Qty./Case

048011-13170-2 6" x 1" x 1" 2S CRS 6,000 3

048011-13171-9 6" x 1" x 1" 2S MED 6,000 3

048011-13172-6 6" x 1" x 1" 2S FIN 6,000 3

048011-13176-4 6" x 2" x 1" 2S CRS 6,000 2

048011-13177-1 6" x 2" x 1" 2S MED 6,000 2

048011-13178-8 6" x 2" x 1" 2S FIN 6,000 2

048011-13183-2 8" x 1" x 3" 2S MED 4,500 3

048011-13184-9 8" x 1" x 3" 2S FIN 4,500 3

048011-13185-6 8" x 2" x 3" 2S CRS 4,500 2

048011-13186-3 8" x 2" x 3" 2S MED 4,500 2

Attention: Wheels are available in other grades and sizes. If you need a specific wheel not listed, contact your 3M Sales Specialist or 3M Authorized Distributor.

Scotch-Brite™ Convolute Wheels

Abrasive Wheel Systems

Scotch-Brite™

Cut and Polish Wheels

• For aggressive finishing

and blending applications

• Good for defect removal

or heavy scratch blending

• Produces a dull finish with a tight

scratch pattern

• Harder than other finishing wheels

UPC Dia. x W x AH Grade Max. RPM Qty./Case

048011-05253-3†6" x 1/2" x 1" 7A CRS 6,000 4

048011-08931-7†6" x 1/2" x 1" 7A MED 6,000 4

048011-05182-6 6" x 1/2" x 1" 5A FIN 6,000 4

048011-08946-1†6" x 1/2" x 1" 7A FIN 6,000 4

048011-03263-4†6" x 1" x 1" 7A CRS 6,000 3

048011-03262-7†6" x 1" x 1" 7A MED 6,000 3

048011-02960-3 6" x 1" x 1" 5A FIN 6,000 3

048011-03270-2 6" x 1" x 1" 7A FIN 6,000 3

048011-03269-6†6" x 1" x 1" 7A VFN 6,000 3

048011-93503-4†6" x 1" x 1-1/4" 5A FIN 6,000 3

048011-03273-3†6" x 2" x 1" 7A CRS 6,000 2

048011-03272-6†6" x 2" x 1" 7A MED 6,000 2

048011-02972-6†6" x 2" x 1" 5A FIN 6,000 2

048011-60043-7†6" x 25" x 1" 7A MED 6,000 1

048011-05183-3†8" x 1/2" x 3" 7A MED 4,500 4

048011-09018-4†8" x 1/2" x 3" 5A FIN 4,500 4

048011-14623-2†8" x 1/2" x 3" 7A FIN 4,500 4

048011-02974-0†8" x 1" x 1-1/4" 5A FIN 4,500 3

048011-03277-1†8" x 1" x 3" 7A CRS 4,500 3

048011-03276-4 8" x 1" x 3" 7A MED 4,500 3

048011-02965-8†8" x 1" x 3" 5A FIN 4,500 3

048011-03275-7†8" x 1" x 3" 7A FIN 4,500 3

048011-03274-0†8" x 1" x 3" 7A VFN 4,500 3

048011-92862-3†8" x 1-1/2" x 1-1/4" 5A FIN 4,500 2

048011-08934-8†8" x 1-1/2" x 3" 7A MED 4,500 2

048011-04156-8†8" x 1-1/2" x 3" 5A FIN 4,500 2

048011-02976-4†8" x 2" x 1-1/4" 5A FIN 4,500 2

048011-03282-5†8" x 2" x 3" 7A CRS 4,500 2

048011-03281-8 8" x 2" x 3" 7A MED 4,500 2

048011-02967-2†8" x 2" x 3" 5A FIN 4,500 2

048011-03280-1†8" x 2" x 3" 7A FIN 4,500 2

048011-03279-5†8" x 2" x 3" 7A VFN 4,500 2

048011-93674-1†8" x 2-1/2" x 3" 7A MED 4,500 1

† Made-to-Order

Scotch-Brite™ Cut and Polish Wheels (cont.)

UPC Dia. x W x AH Grade Max. RPM Qty./Case

048011-03283-2†8" x 3" x 3" 7A MED 4,500 1

048011-02979-5†8" x 3" x 3" 5A FIN 4,500 1

048011-93454-9†8" x 4" x 3" 7A CRS 4,500 1

048011-92936-1†8" x 4" x 3" 7A MED 4,500 1

048011-93675-8†8" x 5" x 3" 7A MED 4,500 1

048011-05248-9†8" x 7" x 3" 7A FIN 4,500 1

048011-13488-8†8" x 20" x 3" 5A FIN 4,500 1

048011-25617-7†8" x 24" x 3" 7A MED 4,500 1

048011-15591-3†8" x 24" x 3" 5A FIN 4,500 1

048011-13486-4†8" x 25" x 3" 7A CRS 4,500 1

048011-92938-5†8" x 25" x 3" 7A MED 4,500 1

048011-16463-2†8" x 25" x 3" 5A FIN 4,500 1

048011-60040-6†8" x 25" x 3" 7A VFN 4,500 1

048011-04244-2†12" x 1/2" x 5" 7A MED 3,000 2

048011-05256-4†12" x 1/2" x 5" 5A FIN 3,000 2

048011-03295-5†12" x 1" x 5" 7A CRS 3,000 1

048011-03294-8†12" x 1" x 5" 7A MED 3,000 1

048011-02975-7†12" x 1" x 5" 5A FIN 3,000 1

048011-93677-2†12" x 1-1/2" x 5" 7A MED 3,000 1

048011-02977-1†12" x 1-1/2" x 5" 5A FIN 3,000 1

048011-03300-6†12" x 2" x 5" 7A CRS 3,000 1

048011-03299-3 12" x 2" x 5" 7A MED 3,000 1

048011-02969-6 12" x 2" x 5" 5A FIN 3,000 1

048011-03297-9†12" x 2" x 5" 7A VFN 3,000 1

048011-03303-7†12" x 3" x 5" 7A MED 3,000 1

048011-05908-2†12" x 3" x 5" 5A FIN 3,000 1

048011-03301-3†12" x 3" x 5" 7A VFN 3,000 1

048011-05533-6†12" x 4" x 5" 7A MED 3,000 1

048011-02983-2†12" x 4" x 5" 5A FIN 3,000 1

048011-05243-4†12" x 4" x 5" 7A VFN 3,000 1

048011-16913-2†12" x 5" x 5" 5A FIN 3,000 1

048011-27887-2†12" x 24" x 5" 5A FIN 3,000 1

048011-60042-0†12" x 25" x 5" 7A CRS 3,000 1

048011-60044-4†12" x 25" x 5" 7A MED 3,000 1

048011-60041-3†12" x 25" x 5" 7A VFN 3,000 1

† Made-to-Order

Attention: Wheels are available in other grades and sizes. If you need a specific wheel not listed, contact your 3M Sales Specialist or 3M Authorized Distributor.

Scotch-Brite™ Convolute Wheels

Abrasive Wheel Systems

Scotch-Brite™ Light

Deburring Wheel

• For finishing applications;

can also be used for light deburring

• Produces a bright and consistent finish

with tight scratch pattern

• Very soft and conformable

UPC Dia. x W x AH Grade Max. RPM Qty./Case

048011-03993-0 6" x 1/2" x 1" 6S FIN 6,000 4

048011-01662-7 6" x 1/2" x 1" 7S FIN 6,000 4

048011-03994-7 6" x 1/2" x 1" 8S FIN 6,000 4

048011-01660-3 6" x 1" x 1" 6S FIN 6,000 3

048011-01661-0 6" x 1" x 1" 7S FIN 6,000 3

048011-01675-7 6" x 1" x 1" 8S FIN 6,000 3

048011-01664-1 6" x 2" x 1" 7S FIN 6,000 2

048011-05263-2 8" x 1/2" x 3" 7S FIN 4,500 4

048011-01678-8 8" x 1/2" x 3" 8S FIN 4,500 4

Scotch-Brite™ Light Deburring Wheel (cont.)

UPC Dia. x W x AH Grade Max. RPM Qty./Case

048011-01665-8 8" x 1" x 3" 6S FIN 4,500 3

048011-01666-5 8" x 1" x 3" 7S FIN 4,500 3

048011-01679-5 8" x 1" x 3" 8S FIN 4,500 3

048011-01667-2 8" x 2" x 3" 7S FIN 4,500 2

048011-01683-2 10" x 1" x 5" 7S FIN 3,600 2

048011-05181-9 12" x 1/2" x 5" 7S FIN 3,000 2

048011-01669-6 12" x 1" x 5" 6S FIN 3,000 1

048011-01670-2 12" x 1" x 5" 7S FIN 3,000 1

048011-01686-3 12" x 1" x 5" 8S FIN 3,000 1

048011-01672-6 12" x 2" x 5" 6S FIN 3,000 1

048011-01673-3 12" x 2" x 5" 7S FIN 3,000 1

048011-01689-4 12" x 2" x 5" 8S FIN 3,000 1

048011-01690-0 12" x 3" x 5" 7S FIN 3,000 1

048011-17985-8 16" x 2" x 10" 7S FIN 2,250 1

Scotch-Brite™ Unitized Wheels

Get high performance and durability in a variety of cleaning, deburring, finishing and polishing applications. Used on right

angle grinders and bench tools, Scotch-Brite™ Wheels produce great results on all types of metal, composites and glass.

Scotch-Brite™ Unitized Wheel Deburring Blending Finishing Polishing

EXL Deburring ••••

Cut and Polish • • •

Roloc EXL • •

Rapid Cut • •

Unitized Wheels Selection Guides

Scotch-Brite™ Unitized Wheel performance differences can be attributed to mineral (aggressiveness) and density (hardness).

The combination of these two characteristics and subtle variations determine if the wheel will cut more aggressively or will

be more durable and less conformable.

Scotch-Brite™ Unitized Wheels

Mineral Abbreviations (prefix to grade)

A — Aluminum Oxide mineral S — Silicon Carbide mineral

C — Ceramic

Density Number (prefix to mineral)

246789

soft hard

Least Aggressive

EXL Deburring Wheels (VFN, FIN, MED, CRS, XCS)

Cut and Polish Wheels (FIN, MED, CRS)

Roloc EXL Wheels (FIN, MED)

Rapid Cut Wheels (CRS, XCS)

Most Aggressive

Softest

EXL Deburring Wheels (2, 3, 4, 6, 8)

Cut and Polish Wheels (5, 7, 9)

Roloc EXL Wheels (2, 6, 8)

Rapid Cut Wheels (7, 9)

Hardest

Attention: Wheels are available in other grades and sizes. If you need a specific wheel not listed, contact your 3M Sales Specialist or 3M Authorized Distributor.

Abrasive Wheel Systems

Scotch-Brite™ Rapid Cut

Unitized Wheels

• Non-woven abrasive wheels

utilizing 3M precision shaped

ceramic grain for higher levels of cut

while maintaining a consistent finish

• Recommended for deburring

and weld blending on all metals

UPC Size Grade Max. RPM Qty./Case

051115-66706-0†1" x 1/8" x 1/8" 7C CRS+ 35,100 100

051115-66732-9†1" x 1/8" x 1/8" 7C XCS+ 35,100 100

051115-66699-5 1" x 1" x 3/16" 7C CRS+ 35,100 50

051115-66725-1 1" x 1" x 3/16" 7C XCS+ 35,100 50

051115-66718-3†2" x 1/8" x 1/8" 7C CRS+ 22,100 60

051115-66744-2†2" x 1/8" x 1/8" 7C XCS+ 22,100 60

051115-66700-8†2" x 1/4" x 1/4" 7C CRS+ 22,100 60

051115-66726-8†2" x 1/4" x 1/4" 7C XCS+ 22,100 60

051115-66711-4 2" x 1/4" x 1/4" 9C CRS+ 22,100 60

051115-66737-4†2" x 1/4" x 1/4" 9C XCS+ 22,100 60

051115-66714-5†2" x 1/2" x 3/8" 7C CRS+ 22,100 30

051115-66740-4†2" x 1/2" x 3/8" 7C XCS+ 22,100 30

051115-66722-0 3" x 1/4" x 3/8" 9C CRS+ 18,100 40

051115-66748-0 3" x 1/4" x 3/8" 9C XCS+ 18,100 40

051115-66702-2 3" x 1/2" x 3/8" 9C CRS+ 18,100 20

051115-66735-0 3" x 1/2" x 3/8" 9C XCS+ 18,100 20

051115-66704-6 4" x 1/4" x 5/8" 7C CRS+ 12,100 20

051115-66730-5 4" x 1/4" x 5/8" 7C XCS+ 12,100 20

051115-66721-3 4" x 1/4" x 5/8" 9C CRS+ 12,100 20

051115-66747-3 4" x 1/4" x 5/8" 9C XCS+ 12,100 20

048011-64857-6 4" x 1/4" x 7/8" 9C CRS+ 12,100 20

048011-64858-3 4" x 1/4" x 7/8" 9C XCS+ 12,100 20

051115-66710-7†6" x 1/8" x 1/2" 7C CRS+ 7,500 8

051115-66736-7†6" x 1/8" x 1/2" 7C XCS+ 7,500 8

051115-66701-5†6" x 1/4" x 1/2" 7C CRS+ 7,500 8

051115-66727-5†6" x 1/4" x 1/2" 7C XCS+ 7,500 8

051115-66705-3†6" x 1/4" x 5/8" 7C CRS+ 7,500 8

051115-66731-2†6" x 1/4" x 5/8" 7C XCS+ 7,500 8

048011-64887-3†6" x 1/4" x 1" 9C XCS+ 7,500 8

051115-66713-8†6" x 1/2" x 1/2" 7C CRS+ 7,500 4

051115-66739-8†6" x 1/2" x 1/2" 7C XCS+ 7,500 4

048011-64897-2†6" x 1/2" x 1/2" 9C XCS+ 7,500 4

048011-64908-5†6" x 1/2" x 1" 9C CRS+ 7,500 4

048011-64907-8†6" x 1/2" x 1" 9C XCS+ 7,500 4

051115-66715-2†6" x 1" x 1" 7C CRS+ 7,500 2

051115-66741-1†6" x 1" x 1" 7C XCS+ 7,500 2

051115-66720-6†8" x 1" x 1" 7C CRS+ 5,500 2

051115-66746-6†8" x 1" x 1" 7C XCS+ 5,500 2

Scotch-Brite™ Rapid Cut

Bench Motor Pack

• #5 telescoping flange adaptor included

UPC Size Grade Qty./Case

048011-64909-2 6" x 1/2" x 1" 9C CRS+ 1

Scotch-Brite™ Roloc™

Rapid Cut Unitized Wheels

• Non-woven abrasive wheels

utilizing 3M precision shaped

ceramic grain for higher levels of cut

while maintaining a consistent finish

• Recommended for deburring

and weld blending on all metals

• Quick change Roloc™ Attachment

UPC Size Grade Max. RPM Qty./Case

Roloc TR (Plastic Button)

051115-66759-6 2" x NH 9C CRS+ 22,100 15/60

048011-64859-0 3" x NH 9C CRS+ 15,100 10/40

051115-66760-2 3" x NH 9C XCS+ 15,100 10/40

Roloc TS (Plastic Button)

051115-66763-3 2" x NH 9C CRS+ 22,100 15/60

051115-66764-0†3" x NH 9C XCS+ 15,100 10/40

Scotch-Brite™ Unitized Wheels

Scotch-Brite™ EXL Unitized

Deburring Wheels

• Strong and efficient for deburring

and polishing of all metal alloys

• Excellent in resisting smearing

and minimizing heat buildup on

the work piece

• Conformable wheel in a variety

of densities and grades for

maximum cut and durability

UPC Dia. x W x AH Grade Max. RPM Qty./Case

048011-15516-6 1" x 1/8" x 1/8" 8A CRS 35,100 100

048011-15517-3 1" x 1/8" x 1/8" 6A MED 35,100 100

048011-13734-6 1" x 1/4" x 1/8" 2S FIN 35,100 100

048011-13752-0 1" x 1" x 3/16" 8A CRS 35,100 50

048011-15527-2 1" x 1" x 3/16" 2A MED 35,100 50

048011-14063-6 1" x 1" x 3/16" 6A MED 35,100 50

048011-13753-7 1" x 1" x 3/16" 8A MED 35,100 50

048011-13713-1 1" x 1" x 3/16" 2S FIN 35,100 50

048011-15514-2 1-1/2" x 1/8" x 3/16" 8A CRS 30,100 80

048011-15515-9 1-1/2" x 1/8" x 3/16" 6A MED 30,100 80

048011-13714-8 1-1/2" x 1/4" x 1/8" 2S FIN 30,100 80

048011-14746-8 1-1/2" x 1/4" x 3/16" 2S FIN 30,100 80

7575

Attention: Wheels are available in other grades and sizes. If you need a specific wheel not listed, contact your 3M Sales Specialist or 3M Authorized Distributor.

Abrasive Wheel Systems

Scotch-Brite™ Unitized Wheels

Scotch-Brite™ EXL Unitized Deburring Wheels (cont.)

UPC Dia. x W x AH Grade Max. RPM Qty./Case

048011-15511-1 2" x 1/8" x 3/16" 8A CRS 22,100 60

048011-15512-8 2" x 1/8" x 3/16" 6A MED 22,100 60

048011-13736-0 2" x 1/4" x 1/8" 2S FIN 16,100 60

048011-15513-5 2" x 1/4" x 3/16" 2S FIN 16,100 60

048011-13755-1 2" x 1/4" x 1/4" 8A CRS 22,100 60

048011-15529-6 2" x 1/4" x 1/4" 2A MED 16,100 60

048011-13932-6 2" x 1/4" x 1/4" 2S FIN 16,100 60

048011-13715-5 2" x 1/2" x 1/4" 2S FIN 16,100 30

048011-15462-6 3" x 1/8" x 1/4" 8A MED 18,100 40

048011-13763-6 3" x 1/4" x 1/4" 8A CRS 18,100 40

048011-15531-9 3" x 1/4" x 1/4" 2A MED 12,100 40

048011-14067-4 3" x 1/4" x 1/4" 6A MED 18,100 40

048011-13764-3 3" x 1/4" x 1/4" 8A MED 18,100 40

048011-13716-2 3" x 1/4" x 1/4" 2S FIN 12,100 40

048011-13766-7 3" x 1/4" x 3/8" 8A CRS 18,100 40

048011-16054-2 3" x 1/4" x 3/8" 2A MED 12,100 40

048011-15118-2 3" x 1/4" x 3/8" 6A MED 18,100 40

048011-14753-6 3" x 1/4" x 3/8" 8A MED 18,100 40

048011-14750-5 3" x 1/4" x 3/8" 2S FIN 12,100 40

048011-14751-2 3" x 1/4" x 3/8" 4A FIN 18,100 40

048011-14752-9 3" x 1/4" x 3/8" 6S FIN 18,100 40

048011-13767-4 3" x 1/2" x 1/4" 8A CRS 15,100 20

048011-15532-6 3" x 1/2" x 1/4" 2A MED 10,000 20

048011-13717-9 3" x 1/2" x 1/4" 2S FIN 10,000 20

048011-13718-6 3" x 3/4" x 1/4" 2S FIN 10,000 10

048011-13739-1 4" x 1/4" x 1/4" 2S FIN 8,500 20

048011-17498-3 6" x 1/4" x 1/2" 2A MED 4,500 8

048011-13741-4 6" x 1/4" x 1/2" 2S FIN 5,000 8

048011-25678-8 6" x 1/4" x 3/4" 2S FIN 5,000 8

048011-15534-0 6" x 1/2" x 1/2" 2A MED 4,500 4

048011-13719-3 6" x 1/2" x 1/2" 2S FIN 5,000 4

048011-15831-0 6" x 1/2" x 5/8" 2S FIN 5,000 4

048011-16545-5 6" x 1/2" x 1" 2A MED 4,500 4

048011-14379-8 6" x 1/2" x 1" 2S FIN 5,000 4

048011-13742-1 6" x 1" x 1/2" 2S FIN 5,000 2

048011-16544-8 6" x 1" x 1" 2A MED 4,500 2

048011-13743-8 6" x 1" x 1" 2S FIN 5,000 2

048011-15827-3 8 x 1/4 x 1/2 2S FIN 4,000 8

048011-15844-0 8" x 1/2" x 1/2" 2S FIN 4,000 4

048011-15824-2 8" x 1/2" x 3/4" 2S FIN 4,000 4

048011-15817-4 12" x 1/2" x 1-1/4" 2S FIN 2,600 2

Scotch-Brite™ Roloc™

EXL Unitized Wheels

• Strong, efficient products for

edge deburring and finishing

• Used with 3M™ Roloc™ or

3M™ Roloc™+ holder pads on

a straight shaft or right-angle tool

UPC Size Grade Max. RPM Qty./Case

Roloc TR (Plastic Button)

048011-17185-2 2" 2A MED 22,100 60

048011-17183-8 2" 2S FIN 22,100 60

048011-17190-6 2" 6A MED 22,100 60

048011-17192-0 2" 8A MED 22,100 60

048011-17186-9 3" 2A MED 15,100 40

048011-17184-5 3" 2S FIN 15,100 40

048011-17191-3 3" 6A MED 15,100 40

048011-17193-7 3" 8A MED 15,100 40

Scotch-Brite™ Cut and Polish

Unitized Wheel

• Tightly layered “unitized” construction

offers long life and durability

• Excellent for aggressive heavy duty blending

and finishing with uniform results

• Good replacement for rubber bonded

wheels and small set-up wheels

UPC Dia. x W x AH Grade Max. RPM Qty./Case

048011-03701-1 1" x 1" x 3/16" 7A CRS 35,100 50

048011-03700-4 1" x 1" x 3/16" 7A MED 35,100 50

048011-01560-6 1" x 1" x 3/16" 5A FIN 35,100 50

048011-08939-3 2" x 1/8" x 1/8" 7A MED 22,100 60

048011-03714-1 2" x 1/8" x 1/4" 7A MED 22,100 60

048011-03716-5 2" x 1/4" x 1/4" 7A CRS 22,100 60

048011-03715-8 2" x 1/4" x 1/4" 7A MED 22,100 60

048011-01561-3 2" x 1/4" x 1/4" 5A FIN 22,100 60

048011-03718-9 2" x 1/2" x 1/4" 7A MED 20,100 30

048011-03727-1 3" x 1/8" x 1/4" 7A MED 18,100 40

048011-03729-5 3" x 1/4" x 1/4" 7A CRS 18,100 40

048011-03728-8 3" x 1/4" x 1/4" 7A MED 18,100 40

048011-01563-7 3" x 1/4" x 1/4" 5A FIN 18,100 40

048011-15121-2 3" x 1/4" x 3/8" 5A FIN 18,100 40

048011-03705-9 3" x 1/2" x 1/4" 7A MED 15,100 20

048011-01565-1 3" x 1/2" x 1/4" 5A FIN 15,100 20

048011-03732-5 3" x 1/2" x 3/8" 7A MED 15,100 20

048011-08878-5 3" x 1/2" x 3/8" 5A FIN 15,100 20

048011-03738-7 3" x 3/4" x 3/8" 7A MED 15,100 10

048011-03740-0 3" x 1" x 1/4" 7A MED 15,100 10

048011-01578-1 4" x 1/4" x 1/4" 5A FIN 12,100 20

048011-01581-1 6" x 1/4" x 1/2" 5A FIN 7,500 8

Attention: Wheels are available in other grades and sizes. If you need a specific wheel not listed, contact your 3M Sales Specialist or 3M Authorized Distributor.

3M™ Flap Wheels

Abrasive Wheel Systems

3M™ Flange Mounted Flap Wheel Selection Guide

Product Mineral Grade Performance Stainless Steel Carbon Steel

241E Aluminum Oxide 50–320 Better

244E Aluminum Oxide 60–120 Better

741A Ceramic Aluminum Oxide Blend 50–120 Best

3M™

Flap Wheels

Coated Abrasive flap wheels are the ideal choice for light grinding, blending, graining and scale removal on a variety of metals.

The abrasive flaps offer a long lasting supply of fresh abrasives and a load resistant design. Available in both flange mounted

and spindle mounted constructions with general purpose aluminum oxide or high performing 3M ceramic aluminum oxide blend

abrasive grain.

3M™ Flap Wheels

241E/244E

• Aluminum oxide on a

flexible XE wt. cloth backing

• Long life and fast cut

• General purpose flap wheels

at a value price

UPC Dia. x W x AH Grade Max. RPM Qty./Case

Flange Mounted

051144-35113-8 6" x 1" x 1" 60 6,100 5

051144-35112-1 6" x 1" x 1" 80 6,100 5

051144-35111-4 6" x 1" x 1" 100 6,100 5

051144-35109-1 6" x 1" x 1" 120 6,100 5

051144-35088-9 6" x 2" x 1" 60 5,200 5

051144-35086-5 6" x 2" x 1" 80 5,200 5

Additional sizes are available.

3M™ Flap Wheels

741A

• 3M ceramic aluminum oxide

blend abrasive grain on a durable

X wt. cloth backing

• Longer life and faster cut

UPC Dia. x W x AH Grade Max. RPM Qty./Case

Flange Mounted

051144-82770-1 6" x 1" x 1" 50 6,100 5

051144-81986-7 6" x 1" x 1" 60 6,100 5

051144-81984-3 6" x 1" x 1" 80 6,100 5

Additional sizes are available.

3M™ Flap Wheels 241E/244E and 741A

can be made-to-order in the following sizes:

Diameter Arbor Hole

> 3" – 4-1/2" 5/8"

> 4-1/2" – 6" 1"

> 6" – 8" 1" or 1-1/4"

> 8" – 10" 1-3/4" or 2"

Additional Sizes

Attention: Wheels are available in other grades and sizes. If you need a specific wheel not listed, contact your 3M Sales Specialist or 3M Authorized Distributor.

Abrasive Wheel Systems

3M™ Flap Wheels

3M™ Spindle Mounted Flap Wheel Selection Guide

Product Mineral Grade Performance Stainless Steel Carbon Steel

244D Aluminum Oxide 60–120 Better

747D Ceramic Aluminum Oxide Blend 36–150 Best

3M™ Flap Wheels 747D —

T83 and T84

• 3M ceramic aluminum oxide blend

abrasive grain on a resin-bonded

X wt. cloth backing

• Includes a grinding aid for cooler

running on stainless steel

UPC Dia. x W x Shk Grade Max. RPM Qty./Case

T83; 1/4" Straight

051144-80761-1 1" x 1" x 1/4" 60 30,000 10

051144-80757-4 1" x 1" x 1/4" 80 30,000 10

051144-80753-6 1" x 1" x 1/4" P120 30,000 10

051144-80763-5 2" x 1" x 1/4" 60 25,000 10

051144-80759-8 2" x 1" x 1/4" 80 25,000 10

051144-80755-0 2" x 1" x 1/4" P120 25,000 10

051144-80650-8 3" x 1" x 1/4" 60 20,000 10

051144-80651-5 3" x 1" x 1/4" 80 20,000 10

051144-80652-2 3" x 1" x 1/4" P120 20,000 10

T84; 1/4–20 Threaded

051144-83271-2 2" x 1" x 1/4–20 EXT 60 25,000 10

051144-83268-2 2" x 1" x 1/4–20 EXT 80 25,000 10

051144-83265-1 2" x 1" x 1/4–20 EXT P120 25,000 10

051144-83269-9 3" x 1" x 1/4–20 EXT 60 20,000 10

051144-83267-5 3" x 1" x 1/4–20 EXT 80 20,000 10

051144-83263-7 3" x 1" x 1/4–20 EXT P120 20,000 10

3M™ Flap Wheels 244D —

T83 and T84

• Aluminum oxide

• General purpose flap wheel delivers

consistent finish and uniform cut

UPC Dia. x W x Shk Grade Max. RPM Qty./Case

T83; 1/4" Straight

051144-35475-7 1" x 1" x 1/4" 60 30,000 10

051144-35476-4 1" x 1" x 1/4" 80 30,000 10

051144-35477-1 1" x 1" x 1/4" 120 30,000 10

051144-14623-9 2" x 1" x 1/4" 60 25,000 10

051144-14624-6 2" x 1" x 1/4" 80 25,000 10

051144-14625-3 2" x 1" x 1/4" 120 25,000 10

051144-14655-0 3" x 1" x 1/4" 60 20,000 10

051144-14656-7 3" x 1" x 1/4" 80 20,000 10

051144-14657-4 3" x 1" x 1/4" 120 20,000 10

T84; 1/4–20 Threaded

051144-35467-2 1" x 1" x 1/4–20 EXT 60 30,000 10

051144-35468-9 1" x 1" x 1/4–20 EXT 80 30,000 10

051144-35469-6 1" x 1" x 1/4–20 EXT 120 30,000 10

051144-14575-1 2" x 1" x 1/4–20 EXT 60 25,000 10

051144-14576-8 2" x 1" x 1/4–20 EXT 80 25,000 10

051144-14607-9 3" x 1" x 1/4–20 EXT 60 20,000 10

051144-14608-6 3" x 1" x 1/4–20 EXT 80 20,000 10

T84; 1/4–20 ThreadedT83; 1/4" Straight

Abrasive Wheel Systems

3M™ Die Grinders — 0.5 HP

• Ideal for a variety of polishing, buffing, shaping and deburring applications

• 3M™ Gripping Material for added comfort and reduced vibration

• Available in extended shaft models

Model No.

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm) Air Inlet Thread Collet Size

Airflow Rate

SCFM (LPM) UPC

28330 0.5 (372) 18,000 1.13 (.512) 6.88 (174.6) 1/4" NPT 1/4" 26 (736) 051141-28330-2

28331 0.5 (372) 18,000* 1.54 (.697) 10.63 (269.9) 1/4" NPT 1/4" 26 (736) 051141-28331-9

28332 0.5 (372) 4,000 1.58 (.717) 8.88 (200) 1/4" NPT 1/4" 26 (736) 051141-28332-6

*With extension

28330

28331

28332

3M™ Power Tools for Abrasive Wheel Systems

20237

3M™ Die Grinders — 1 HP

• Powerful 1 HP die grinders are excellent for big jobs

such as weld or stock removal

• 3M™ Gripping Material for added comfort and reduced vibration

Model No.

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm) Air Inlet Thread Collet Size

Airflow Rate

SCFM (LPM) UPC

20237 1 (744) 20,000 1.69 (.77) 7.75 (196.9) 1/4" NPT 1/4" 37 (1,048) 051141-20237-2

20238 1 (744) 18,000 1.69 (.77) 7.75 (196.9) 1/4" NPT 1/4" 37 (1,048) 051141-20238-9

20239 1 (744) 12,000 2.06 (.93) 10 (254) 1/4" NPT 1/4" 37 (1,048) 051141-20239-6

20240 1 (744) 8,000 2.06 (.93) 10 (254) 1/4" NPT 1/4" 37 (1,048) 051141-20240-2

20240

20238

20239

3M™ Die Grinders — 0.3 HP

• Ideal for deburring, blending, finishing and polishing intricate and hard-to-reach areas

• 3M™ Gripping Material for added comfort and reduced vibration

• Available in extended shaft models

Model No.

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm) Air Inlet Thread Collet Size

Airflow Rate

SCFM (LPM) UPC

28630 0.3 (224) 25,000 1.40 (.639) 10 (254) 1/4" NPT 1/4"†17 (481) 051141-28630-3

28629 0.3 (224) 25,000 0.89 (.405) 6.125 (156) 1/4" NPT 1/4"†17 (481) 051141-28629-7

28628 0.3 (224) 18,000 1.52 (.690) 10 (254) 1/4" NPT 1/4"†17 (481) 051141-28628-0

28627 0.3 (224) 18,000 1.15 (.522) 7.25 (184) 1/4" NPT 1/4"†17 (481) 051141-28627-3

†Includes 1/8" collet insert

28629/28627

28630/28628

Abrasive Wheel Systems

Product Name UPC Qty./Case For Use With Size/Description Max RPM

Mandrel No. 990

048011-04018-9 5 Scotch-Brite™ Unitized Wheels

with 3/16" Center Hole 2-1/16" x 1/4" x 3/4" 22,200

Mandrel No. 936

048011-15012-3 5 Scotch-Brite™ Unitized Wheels

with 3/8" Center Hole

3" wheel;

1-3/4" x 1/4" x 1" 18,200

Flange Adapter Kit No. 5

048011-16859-3 1 Set 6" Wheels; Telescoping wheel

adapters 1" and 1/2" wide to

reduce 1" wheel cores to fit 1/2",

5/8", 3/4", or 7/8" shafts; Must

be used with side flanges

1" x 1/2" x 1/2" N/A

048011-16860-9 1 Set 1" x 1" x 1/2" N/A

Flange Nut

051141-28739-3 1 Set

4" x 1/4" x 5/8" CH

Unitized Wheels and Depressed

Center Grinding Wheels

1" x 5/8" x 3/8";

3/8–24 INT N/A

051141-28740-9 1 Set 1" x /8";

5/8 –11 INT N/A

Wheel Adapter Kit No. 3

051144-45035-0 1

Two arbor hole (plug type)

adapters for 6" and

8" diameter flap wheels

1" OD x 1/2" ID N/A

051144-45034-3 1 1" OD x 5/8" ID N/A

051144-45033-6 1 1" OD x 3/4" ID N/A

051144-45032-9 1 1" OD x 7/8" ID N/A

Wheel Adapter Kit No. 81A

051144-45081-7 1 For T84 Flap Wheels 1/4" x 1/4–20 INT N/A

Accessories for Abrasive Wheel Systems

Contract Production Services/CPS

1936 Lyndale Avenue South Toll Free: 800-843-0619

Minneapolis, MN 55403 Tel: 612-767-2978

www.cpsabrasives.com Fax: 612-872-0189

Large Diameter Wheel Flanges and Other Accessories

are available and may be purchased directly through Contract Production Services/CPS. Please contact Contract

Production Services/CPS directly to check availability and other specific information. Use the part number to identify

and specify the desired item.

Office Hours:

Monday — Thursday,

6:00 a.m. — 4:00 p.m. (Central Time)

Product Name UPC Qty./Case For Use With Size/Description Max RPM

Mandrel 933

048011-13968-5 5

Furnished complete with washers

to fit available wheel sizes;

Fits 1/4" x 5/16" center holes

1/4" Shaft Diameter;

2" x 1/4" x 1" 14,000

Mandrel 934

048011-04021-9 1

Furnished complete with washers

to fit available wheel sizes;

Fits 1/2" center holes

1/2" Shaft Diameter;

3-1/16" x 1/4" x 2-1/2" 12,000

3M™ Wheel Adapter Kit 28419

051141-28419-4 1 3M™ Inline Sanders;

Wheels with 1/2"–1" center holes 1/2–20 EXT x 5/8–11 INT See MOS

of wheel

3M™ Wheel Adapter Kit 45038

051144-45038-1 1 3M™ Inline Sanders;

Wheels with 5/8"–1" center holes 5/8–11 EXT x 5/8–11 INT See MOS

of wheel

3M™ Spindle Extender Kit

048011-04019-6 1 3M™ Inline Sanders;

Wheels with 5/8"–1" center holes Part No. 300 See MOS

of wheel

Disc

Mandrel

Disc

Mandrel

Accessories for Abrasive Wheel Systems

Abrasive Wheel Systems

Inline

Sanding

Systems

Inline Sanding Systems

Level Welds Quickly to Match Directional Mill Finishes

In three easy steps, using the 3M Finishing System, you can grind and blend welds to match your finish.

Product Name

Step 1

Leveling the Weld Best 3M™ Fibre Disc 785C

Better 3M™ Fibre Disc 501C

Step 2

Setting the Grain Premium Premium 3M™ Cubitron™ II Belt 947A

Best 3M™ Belt 777F

Step 3

Final Finishing Best Scotch-Brite™ Surface Conditioning Belt

A MED for a #4 finish, A CRS for a #3 finish

Best Scotch-Brite™ Match and Finsih Flap Brush

HS A CRS, A MED

Final Blending and

Touch-up Applications Better Scotch-Brite™ Hand Pad 7446

S MED

3M™ Cubitron™ II

Abrasive Belt 947A

• Made with revolutionary 3M precision

shaped abrasive grain technology

• Flexible X wt. poly-cotton backing

• Optimized for low-medium pressure

applications on stainless, mild steel and aluminum

UPC W x L Grade Min./Case

051125-94733-6 3-1/2" x 15-1/2" 60+ 10/50

051125-94734-3 3-1/2" x 15-1/2" 80+ 10/50

051125-94735-0 3-1/2" x 15-1/2" 120+ 10/50

Inline Sanding Systems

Belts and Brushes

Scotch-Brite™ Surface Conditioning

Belt for Inline Sanders

• Match and blend final finishes

• Run at low speeds to generate

uniform, well-blended satin finishes

• 1 HP

UPC No. Size Grade Color Qty./Case

048011-09650-6 3" x 10-11/16" A VFN Blue 10

048011-05016-4 3-1/2" x 15-1/2" A CRS Brown 10

048011-05228-1 3-1/2" x 15-1/2" A MED Maroon 10

048011-05643-2 3-1/2" x 15-1/2" A VFN Blue 10

3M™ Cloth Belt 777F

for Inline Sanders

• A premium abrasive belt for

use with in-line drum sanders

• 3M™ Ceramic Aluminum Oxide blend

abrasive grain for long lasting performance

• Grinding aid for cooler cutting action

UPC No. Size Grade Qty./Case

051144-77476-0 3-1/2" x 15-1/2" 60 50

051144-77333-6 3-1/2" x 15-1/2" 80 50

051144-84307-7 3-1/2" x 15-1/2" P120 50

Scotch-Brite™ Match and Finish

Flap Brushes and Combi Flap Brushes

• Match final finishes back into fabricated

metals like stainless steel, aluminum,

brass and others

• Conforms to most surface geometrics

• Easy to control

• Easy-thread on/off attachment

• MOS: 3,500 RPM

UPC D x W x CH Grade Color Qty./Case

Flap Brushes

051141-55748-9 4-1/2" x 4" x 5/8–11 5A XCS Black 2

051141-55749-6 4-1/2" x 4" x 5/8–11 HS 7A CRS Gold 2

051141-55750-2 4-1/2" x 4" x 5/8–11 HS 7A MED Purple 2

051141-55745-8 4-1/2" x 4" x 5/8–11 5A MED Maroon 2

051141-55747-2 4-1/2" x 4" x 5/8–11 5S MED Gray 2

051141-55746-5 4-1/2" x 4" x 5/8–11 5A VFIN Maroon 2

051141-55730-4 4-1/2" x 2" x 5/8–11* 5A XCS Black 2

051141-55731-1 4-1/2" x 2" x 5/8–11* HS 7A CRS Gold 2

051141-55732-8 4-1/2" x 2" x 5/8–11* HS 7A MED Purple 2

051141-55727-4 4-1/2" x 2" x 5/8–11* 5A MED Maroon 2

051141-55729-8 4-1/2" x 2" x 5/8–11* 5S MED Gray 2

051141-55728-1 4-1/2" x 2" x 5/8–11* 5A VFIN Maroon 2

Combi Flap Brushes

051141-55744-1 4-1/2" x 4" x 5/8–11 A 60 Maroon 2

051141-55742-7 4-1/2" x 4" x 5/8–11 A 100 Maroon 2

051141-55743-4 4-1/2" x 4" x 5/8–11 A 150 Maroon 2

051141-55726-7 4-1/2" x 2" x 5/8–11* A 60 Maroon 2

051141-55724-3 4-1/2" x 2" x 5/8–11* A 100 Maroon 2

051141-55725-0 4-1/2" x 2" x 5/8–11* A 150 Maroon 2

*Also available in 4-way keyway attachments.

3M™ Power Tools for Inline Sanding Systems

Inline Sanding Systems

3M™ Match and Finish Sander

• Generate straight-line scratches for finishing stainless steel and other metals

• Front to back motion helps prevent curved scratches

• Easy to control for reduced start/stop marks

• Easy screw-on/screw-off attachments

• Design for use with Scotch-Brite™ Match and Finish Flap Brushes, 3M™ Abrasive Belts or Scotch-Brite™ Belts*

Model No.

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm) Air Inlet Thread

Airflow Rate

SCFM (LPM) Shaft Size UPC

28659 1 (744) 3,500 4.6 (2.1) 13.5 (343) 1/4" NPT 37 (1,048) 5/8"–11 EXT 051141-28659-4

*To run belt products, 3M™ Expander Wheel (28718) and Adapter Kit (28719) are required. See page 68.

28659

3M™ Inline Sanders

• Generate straight-line scratches for finishing stainless steel and other metals

• Can be used with inflatable or slotted wheel accessories and many other wheel products

Model No.

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm) Air Inlet Thread

Airflow Rate

SCFM (LPM) Shaft Size UPC

28338 1 (744) 1,600 3.32 (1.51) 9.88 (251) 1/4" NPT 37 (1,048) 5/8"–11 EXT 051141-28338-8

28339 1 (744) 3,500 2.64 (1.20) 8.50 (216) 1/4" NPT 37 (1,048) 5/8"–11 EXT 051141-28339-5

2833928338

Inline Sanding Systems

Product Name UPC Qty./Case For Use With Size/Description Max RPM

3M™ Rubber Slotted

Expander Wheels

Use 3M™ Wheel Adapter Kits to mount wheel to inline sander

051141-28348-7 1

For use with belts

3-1/2" x 15-1/2" or

3" x 10-11/16"

5" x 3-1/2" 5/8" Arbor Hole 3,500

051141-28349-4 1 3-1/4" x 3" 5/8" Arbor Hole 3,500

3M™ Wheel Adapter Kit 45038

051144-45038-1 1 3M™ Inline Sanders;

Wheels with 5/8"–1" center holes 5/8–11 EXT x 5/8–11 INT See MOS

of wheel

3M™ Spindle Extender Kit

048011-04019-6 1 3M™ Inline Sanders;

Wheels with 5/8"–1" center holes Part No. 300 See MOS

of wheel

3M™ Match and Finish Rubber

Slotted Expander Wheel Use 3M™ Expander Wheel and Adapter Kit with 3M™ Match and Finish Sander

051141-28718-8 1 3-1/2" x 15-1/2" belts 5" x 3-1/2" x 1" AH 3,500

051141-27819-5 1 To mount 28718 wheel on

3M™ Match and Finish Sander 1" x 5/8–11 INT N/A

Accessories for Inline Sanding Systems

Hand

Finishing

Hand Finishing

3M™ Abrasive Sheets

3M™ Utility Cloth Sheet and Roll Selection Guide

A good choice for all your utility sanding and general maintenance work. Can be torn and rolled without shelling.

Product ID Mineral Backing Features Performance Blending Finishing Cleaning

011K Aluminum Oxide Flexible Utility Cloth Closed Coat; General purpose use Good

211K Aluminum Oxide Flexible Utility Cloth Use for all general maintenance work Better

314D Premium

Aluminum Oxide Durable Cloth Strong bonding system for shelling resistance Best

3M™ Utility Cloth

Sheets 011K

• Aluminum Oxide mineral

• General purpose use

UPC W x L Grade Min./Case

Sheets

051144-02433-9 9" x 11" CRS 50/250

051144-02432-2 9" x 11" MED 50/250

051144-02431-5 9" x 11" FINE 50/250

3M™ Utility Cloth

Sheets and Rolls 211K

• Aluminum oxide on a J wt. cloth backing

• Use these flexible utility rolls and sheets

for general applications such as deburring,

rust removal, strapping and all general

maintenance work

UPC W x L Grade Min./Case

Sheets

051144-02410-0 9" x 11" 80 50/250

051144-02409-4 9" x 11" 100 50/250

051144-02408-7 9" x 11" 120 50/250

3M™ Abrasive Sheets

3M™ Wetordry™ Sheet Selection Guide

Still a favorite for their reduced clogging, long life and great finish. Good general use sheet for hand or machine sanding.

Can be run wet or dry.

Product ID Mineral Backing Blending Finishing

431Q Silicon Carbide C wt. Paper

413Q Silicon Carbide A wt. Paper

3M™ Paper Sheet Selection Guide

Conformable and versatile, 3M™ Paper Sheets are ideal for hand or machine sanding. Various constructions available for use on

wood, metal, paint, plastic and fiberglass.

Product ID Mineral Backing Performance Blending Finishing

336U Aluminum Oxide C wt. Paper Better

346U Aluminum Oxide D wt. Paper Best

3M™ Utility Cloth

Sheets and Rolls

314D

• Aluminum oxide on

X and J wt. cloth backings

• Ideal for all utility jobs

• Can be torn into strips and

rolled without shelling

UPC W x L Grade Backing Min./Case

Sheets

051115-19775-8 9" x 11" P40 X wt. 50/250

051115-19774-1 9" x 11" P50 X wt. 50/250

051115-19773-4 9" x 11" P60 X wt. 50/250

051115-19772-7 9" x 11" P80 J wt. 50/250

051115-19771-0 9" x 11" P100 J wt. 50/250

051115-19770-3 9" x 11" P120 J wt. 50/250

051115-19769-7 9" x 11" P150 J wt. 50/250

051115-19768-0 9" x 11" P180 J wt. 50/250

051115-19767-3 9" x 11" P220 J wt. 50/250

051115-19766-6 9" x 11" P240 J wt. 50/250

051115-19765-9 9" x 11" P280 J wt. 50/250

051115-19764-2 9" x 11" P320 J wt. 50/250

051115-19763-5 9" x 11" P400 J wt. 50/250

Utility Rolls

051115-19794-9 1" x 50 yds. P50 X wt. 1/5

051115-19793-2 1" x 50 yds. P60 X wt. 1/5

051115-19792-5 1" x 50 yds. P80 J wt. 1/5

051115-19791-8 1" x 50 yds. P100 J wt. 1/5

051115-19790-1 1" x 50 yds. P120 J wt. 1/5

051115-19789-5 1" x 50 yds. P150 J wt. 1/5

051115-19788-8 1" x 50 yds. P180 J wt. 1/5

051115-19787-1 1" x 50 yds. P220 J wt. 1/5

051115-19786-4 1" x 50 yds. P240 J wt. 1/5

051115-19785-7 1" x 50 yds. P280 J wt. 1/5

051115-19784-0 1" x 50 yds. P320 J wt. 1/5

051115-19783-3 1" x 50 yds. P400 J wt. 1/5

051115-19813-7 1-1/2" x 50 yds. P50 X wt. 1/5

051115-19812-0 1-1/2" x 50 yds. P60 X wt. 1/5

051115-19811-3 1-1/2" x 50 yds. P80 J wt. 1/5

051115-19810-6 1-1/2" x 50 yds. P100 J wt. 1/5

051115-19809-0 1-1/2" x 50 yds. P120 J wt. 1/5

051115-19808-3 1-1/2" x 50 yds. P150 J wt. 1/5

051115-19807-6 1-1/2" x 50 yds. P180 J wt. 1/5

051115-19806-9 1-1/2" x 50 yds. P220 J wt. 1/5

051115-19805-2 1-1/2" x 50 yds. P240 J wt. 1/5

051115-19804-5 1-1/2" x 50 yds. P280 J wt. 1/5

051115-19803-8 1-1/2" x 50 yds. P320 J wt. 1/5

051115-19802-1 1-1/2" x 50 yds. P400 J wt. 1/5

Specialty Abrasives

3M™ Abrasive Sheets

3M™ Utility Cloth Sheets and Rolls 211K (cont.)

UPC W x L Grade Min./Case

Sheets

051144-02407-0 9" x 11" 150 50/250

051144-02406-3 9" x 11" 180 50/250

051144-02405-6 9" x 11" 220 50/250

051144-02404-9 9" x 11" 240 50/250

051144-02402-5 9" x 11" 320 50/250

051144-12501-2 9" x 11" 400 50/250

051144-12500-5 9" x 11" 500 50/250

Utility Rolls

051144-05010-9 1" x 50 yds. 80 1/5

051144-05009-3 1" x 50 yds. 100 1/5

051144-05008-6 1" x 50 yds. 120 1/5

051144-05007-9 1" x 50 yds. 150 1/5

051144-05006-2 1" x 50 yds. 180 1/5

051144-05005-5 1" x 50 yds. 220 1/5

051144-05004-8 1" x 50 yds. 240 1/5

051144-05003-1 1" x 50 yds. 280 1/5

051144-05002-4 1" x 50 yds. 320 1/5

051144-05001-7 1" x 50 yds. 400 1/5

051144-05000-0 1" x 50 yds. 500 1/5

051144-05030-7 1-1/2" x 50 yds. 80 1/5

051144-05029-1 1-1/2" x 50 yds. 100 1/5

051144-05028-4 1-1/2" x 50 yds. 120 1/5

051144-05027-7 1-1/2" x 50 yds. 150 1/5

051144-05026-0 1-1/2" x 50 yds. 180 1/5

051144-05025-3 1-1/2" x 50 yds. 220 1/5

051144-05024-6 1-1/2" x 50 yds. 240 1/5

051144-05022-2 1-1/2" x 50 yds. 320 1/5

051144-05021-5 1-1/2" x 50 yds. 400 1/5

051144-05020-8 1-1/2" x 50 yds. 500 1/5

051144-05050-5 2" x 50 yds. 80 1/5

051144-05049-9 2" x 50 yds. 100 1/5

051144-05048-2 2" x 50 yds. 120 1/5

051144-05047-5 2" x 50 yds. 150 1/5

051144-05046-8 2" x 50 yds. 180 1/5

051144-05045-1 2" x 50 yds. 220 1/5

051144-05044-4 2" x 50 yds. 240 1/5

051144-05042-0 2" x 50 yds. 320 1/5

051144-05041-3 2" x 50 yds. 400 1/5

051144-05040-6 2" x 50 yds. 500 1/5

3M™ Utility Cloth Sheets and Rolls 314D (cont.)

UPC W x L Grade Backing Min./Case

Utility Rolls

051115-19826-7 2" x 50 yds. P40 X wt. 1/5

051115-19825-0 2" x 50 yds. P50 X wt. 1/5

051115-19824-3 2" x 50 yds. P60 X wt. 1/5

051115-19823-6 2" x 50 yds. P80 J wt. 1/5

051115-19822-9 2" x 50 yds. P100 J wt. 1/5

051115-19821-2 2" x 50 yds. P120 J wt. 1/5

051115-19820-5 2" x 50 yds. P150 J wt. 1/5

051115-19819-9 2" x 50 yds. P180 J wt. 1/5

051115-19818-2 2" x 50 yds. P220 J wt. 1/5

051115-19817-5 2" x 50 yds. P240 J wt. 1/5

051115-19816-8 2" x 50 yds. P280 J wt. 1/5

051115-19815-1 2" x 50 yds. P320 J wt. 1/5

051115-19814-4 2" x 50 yds. P400 J wt. 1/5

Hand Finishing

3M™ Abrasive Sheets

3M™ Wetordry™ Sheets 413Q

• Silicon carbide on an A wt.

paper backing

• Reduced clogging eliminates

dust when used wet

• Excellent conformability

UPC W x L Grade Min./Case

051144-02007-2 9" x 11" 220 50/500

051144-02006-5 9" x 11" 240 50/250

051144-02005-8 9" x 11" 280 50/250

051144-02004-1 9" x 11" 320 50/500

051144-02003-4 9" x 11" 360 50/250

051144-02002-7 9" x 11" 400 50/500

3M™ Wetordry™

Paper Sheets 431Q

• Silicon carbide on a C wt.

paper backing

• Reduced clogging eliminates

dust when used wet

• Heavyweight paper backing for

increased durability

UPC W x L Grade Min./Case

051144-02018-8 9" x 11" 80 50/250

051144-02017-1 9" x 11" 100 50/250

051144-02016-4 9" x 11" 120 50/250

051144-02015-7 9" x 11" 150 50/250

051144-02014-0 9" x 11" 180 50/250

3M™ Paper Sheets

336U/346U

• Aluminum oxide on D wt.

(grades 36–80) and C wt.

(grades 100–150) paper backing

• Open coat resists loading on soft materials

• General purpose sheets ideal for hand or

machine sanding of many different materials,

including wood, metals, paints, plastics and fiberglass

UPC W x L Grade Min./Case

336U

051144-02114-7 9" x 11" 100 100/1000

051144-02113-0 9" x 11" 120 100/1000

051144-02112-3 9" x 11" 150 100/1000

346U

051144-02119-2 9" x 11" 36 50/250

051144-02118-5 9" x 11" 40 50/250

051144-02117-8 9" x 11" 50 50/500

051144-02116-1 9" x 11" 60 50/500

051144-02115-4 9" x 11" 80 50/500

Specialty Abrasives

Scotch-Brite™ Hand Pads

Scotch-Brite™ Hand Pad Selection Guide

Performance Blending Deburring Finishing Cleaning

Better 7446, 7447 7440, 7447, 7448 — —

Best 7440, 8447 7446, 8447 7440 7447

Premium 7447/7448 PRO 7447/7448 PRO 7447/7448 PRO 8447

Scotch-Brite™ Hand Pads

Scotch-Brite™ Hand Pads give you a fast, consistent scuff for everyday surface preparation. Ideal for cleaning parts and scuffing

prior to staining and painting. Also a great alternative to steel wool — similar performance without the rusting or splintering.

Less Aggressive/Finer Finish More Aggressive/Coarser Finish

7445 7448 7448 PRO 7447 7447 PRO 8447 7446 7440

Scotch-Brite™ Light Duty

Cleansing Pad 7445

• Very mild abrasive for gentle,

yet thorough cleaning

• Commonly used with liquid detergent

• Performance similar to steel wool grade 0000

UPC W x L Grade Color Qty./Case

048011-16976-7 6" x 9" F SFN White 60

Scotch-Brite™ Ultra Fine

Hand Pad 7448

• Ultra fine consistent finishes on metals,

woods, plastics and composites

• Performance similar to steel wool grade 00

UPC W x L Grade Color Qty./Case

048011-04028-8 6" x 9" S ULF Gray 60

Scotch-Brite™

Hand Pads 7448 PRO

• High performance pad takes less

time to prep surface and lasts longer

• Tightly graded abrasive particles

for consistent, uniform scratch

throughout life of the hand pad

• New, long lasting pad made with durable

non-woven nylon web is flexible enough to get into

hard-to-sand places; Specially coated to minimize loading

• Ideal for everyday uses like prepping surfaces for color coat;

general scuffing, cleaning and hand blending

• Center perforated for convenience

UPC W x L Grade Color Qty./Case

048011-64935-1 6" x 9" S ULF Gray 20

048011-64933-7 Trial Pack — Includes one each: 7447 PRO and 7448 PRO

Scotch-Brite™ General

Purpose Hand Pad 7447

• Worldwide standard for surface conditioning

• Clean, blend, finish and deburr

faster, easier, and with better

results than conventional abrasives

• Performance similar to steel wool grade 1

UPC W x L Grade Color Qty./Case

048011-04029-5 6" x 9" A VFN Maroon 60

Hand Finishing

Scotch-Brite™

Hand Pads 7447 PRO

• High performance pad takes less

time to prep surface and lasts longer

• Tightly graded abrasive particles

for consistent, uniform scratch

throughout life of the hand pad

• New, long lasting pad made with durable

non-woven nylon web is flexible enough to get into

hard-to-sand places; Specially coated to minimize loading

• Ideal for everyday uses like prepping surfaces for color coat;

general scuffing, cleaning and hand blending

• Center perforated for convenience

UPC W x L Grade Color Qty./Case

048011-64926-9 6" x 9" A VFN Maroon 20

048011-64933-7 Trial Pack — Includes one each: 7447 PRO and 7448 PRO

Scotch-Brite™ Hand Pads

Scotch-Brite™ Production

Hand Pad 8447

• High cut for paint prep, blending

and scuffing

• Long life performance on aluminum,

stainless steel, plastics, wood and fiberglass

• Performance similar to steel wool grade 2

UPC W x L Grade Color Qty./Case

048011-24037-4 6" x 9" A VFN Maroon 60

Scotch-Brite™ Blending

Hand Pad 7446

• Specially designed for hand blending

and finishing stainless steel

• Mineral coarseness blends surface

scratches on many metals, wood

and synthetic surfaces

• Performance similar to steel wool grade 3

UPC W x L Grade Color Qty./Case

048011-04051-6 6" x 9" S MED Gray 40

Scotch-Brite™ Heavy Duty

Hand Pad 7440

• Most durable and aggressive pad

for quick stock removal

• Cuts fast to remove contaminants

and oxides in demanding cleaning

and finishing applications

• Performance similar to steel wool grade 4

UPC W x L Grade Color Qty./Case

048011-04050-9 6" x 9" A MED Gray 40

Scotch-Brite™ Durable

Flex Hand Pads

• High performance pads are

packed with tightly graded abrasive

mineral for more consistent, fast cut

• Flexible pad cleans, blends and finishes

where conformability is needed

• Ideal for prepping surfaces for primer and color

coat, general scuffing, cleaning and hand blending

• S Ultra Fine (S ULF) produces a finish similar to steel wool grade 00

• A Very Fine (A VFN) produces a finish similar to steel wool grade 1

UPC W x L Grade Color Qty./Case

048011-64659-6 4-1/2" x 9" A VFN Maroon 100

048011-64660-2 4-1/2" x 9" S ULF Gray 100

Scotch-Brite™ Multi-Flex

Sheet Rolls

• Highly conformable non-woven

web roll is perforated to easily

tear into sixty 8" x 4" sheets

• Excellent sharpness and

conformability for cleaning

and finishing surfaces by hand

UPC W x L Grade Color Qty./Case

051131-07521-4 8" x 20' A VFN Maroon 2

051131-07522-1 8" x 20' S ULF Light Gray 2

Hand Finishing

Scotch-Brite™ Hand Pad Trial Packs

Less Aggressive/Finer Finish More Aggressive/Coarser Finish

7445 7448 7448 PRO 7447 7447 PRO 8447 7446 7440

Scotch-Brite™ Hand Pad

Trial Pack 961S

• Contains 1 each of the following:

– Scrubbing Sponge 74

– Light Duty Pad 6448

– Heavy Duty Pad 7440

– Light Duty Cleansing Pad 7445

– Blending Pad 7446

– General Purpose Pad 7447

– Ultra Fine Pad 7448

– Production Pad 8447

– Twist-Lok™ Pad Holder 961

UPC Size Min./Case

048011-17144-9 6" x 9" 5

Scotch-Brite™ Hand Pad

Trial Pack 7447 PRO

and 7448 PRO

• Contains 1 each of the following:

– Scotch-Brite™ Hand Pad 7447 PRO (Maroon)

– Scotch-Brite™ Hand Pad 7448 PRO (Gray)

UPC Size Min./Case

048011-64933-7 6" x 9" 20 packs/case

Hand Finishing

Scotch-Brite™ Roll Selection Guide

Performance Blending Finishing Deburring Cleaning

Good Multi-Flex Multi-Flex — —

Better Clean and Finish Clean and Finish — Multi-Flex

Best Cut and Polish Production Clean and Finish — Clean and Finish

Premium 7447/7448 PRO 7447/7448 PRO Cut and Polish Production Clean and Finish

Scotch-Brite™

Clean and Finish Rolls

• Highly conformable

non-woven web can

be cut to desired length

for hand sanding or

oscillating sanders

UPC W x L Grade Qty./Case

048011-00291-0†2" x 30' A FIN 6

048011-00260-6 2" x 30' A VFN 6

048011-00261-3 3" x 30' A VFN 4

048011-00264-4 4" x 30' A MED 3

048011-00265-1 4" x 30' A FIN 3

048011-00266-8 4" x 30' A VFN 3

048011-00270-5 4" x 30' A VFN 3

048011-00263-7 4" x 30' F SFN 3

048011-00267-5 4" x 30' F SFN 3

048011-00268-2 4" x 30' S ULF 3

048011-00262-0 4" x 30' TALC 3

048011-00274-3 6" x 30' A MED 2

048011-00275-0 6" x 30' A FIN 2

048011-00276-7 6" x 30' A VFN 2

048011-00284-2 12" x 30' A VFN 1

048011-00254-5 12" x 30' TALC 1

† Made-to-Order

Scotch-Brite™ Production

Clean and Finish Rolls

• Precision web/mineral configuration

for most uniform general purpose

finishing in roll form

• Excellent for critical finishes and long life

UPC W x L Grade Color Qty./Case

048011-28175-9†4" x 30' A VFN Maroon 3

048011-28176-6†6" x 30' A VFN Maroon 2

† Made-to-Order

Scotch-Brite™

Cut and Polish Rolls

• A unique and aggressive material

for cleaning and finishing

• Sturdy, long lasting web material is

great for heavy industrial cleaning

and light deburring applications

• Works well for stropping and

other bench applications

UPC W x L Grade Qty./Case

048011-04085-1 1" x 30' A MED 2

048011-05206-9 2" x 30' A MED 2

048011-05207-6 4" x 30' A MED 2

Scotch-Brite™ Clear

Blend Prep Scuff 7745

• Ideal for top coat rubbing, sealer sanding prior

to lacquer, and defuzzing or denibbing wood

• Performance similar to steel wool grade 000

UPC W x L Grade Color Qty./Case

051131-07745-4 4-3/4" x 15' A ULF Gold 3

Scotch-Brite™ 7447/7448 PRO Rolls

• High performance abrasive takes less

time to prep surface and lasts longer

• Tightly graded abrasive particles

for consistent, uniform scratch

throughout life of the abrasive

• New, long lasting pad made with durable non-woven

nylon web is flexible enough to get into hard-to-sand

places; Specially coated to minimize loading

• Ideal for everyday uses like prepping surfaces for color coat;

general scuffing, cleaning and hand blending

UPC W x L Grade Color Qty./Case

048011-64964-1†Belt sizes made to order.

Specify UPC, grade and

belt size (W" x L").

S ULF Gray Determined

by belt size.

048011-64956-6†A VFN Maroon

† Made-to-Order

Scotch-Brite™ Rolls

Accessories for Hand Finishing

Product Name UPC Qty./Case For Use With Size/Description Max RPM

Forked Spindle

051144-45121-0 10 For attaching utility cloth strips 1/4" x 3" N/A

3M™ Wetordry™ Sponge Pad 051131-05526-1 50 Wetordry™ Paper Sheets 2-3/4" x 5-1/2" x 3/8" N/A

3M™ Stikit™ Soft Hand Pad 051144-05530-2 5/10 Stikit™ Sheet Rolls 2-3/4" x 5-1/2" x 3/8" N/A

Scotch-Brite™ Pad Holder

No. 961

048011-09493-4 10

Scotch-Brite™ Hand Pads;

Provides increased leverage

and eliminates “finger” marks

3-1/2" x 4-3/4" N/A

Mini Mandrel No. 935

048011-04020-2 5

Scotch-Brite™ Strips to

clean and polish inner diameters

and other tight areas

2-7/8" x 1/4" 14,000

Hand Finishing

Specialty

Abrasives

Specialty Abrasives

3M™ Cartridge Rolls

Cartridge rolls are ideal for getting into small, hard to reach spaces. As they wear, the wrapped layers of the cartridge roll

continuously expose fresh abrasive layers for continued cutting action. Available in regular and tapered construction.

3M™ Cartridge Rolls 747D

• 3M ceramic aluminum oxide blend

abrasive grain on an X wt. cloth backing

• Long life and fast cut

• Contains grinding aid for cooler

cutting on heat sensitive alloys

UPC Dia. x L x CH Grade Max. RPM Qty./Case

Regular

051144-80790-1 1/2" x 1-1/2" x 1/8" 60 24,000 100

051144-80796-3 1/2" x 1-1/2" x 1/8" 80 24,000 100

051144-80792-5 1/2" x 1-1/2" x 1/8" P120 24,000 100

Full Taper

051144-80786-4 1/2" x 1-1/2" x 1/8" 60 24,000 100

051144-80787-1 1/2" x 1-1/2" x 1/8" 80 24,000 100

051144-80788-8 1/2" x 1-1/2" x 1/8" P120 24,000 100

3M™ Cartridge Rolls 341D

• Aluminum oxide on an X wt. cloth backing

• Long life and fast cut

• General purpose cartridge rolls

at a value price

UPC Dia. x L x CH Grade Max. RPM Qty./Case

Regular

051144-96959-3 1/4" x 1" x 1/8" P60 24,000 100

051144-14021-3 1/4" x 1" x 1/8" P80 24,000 100

051144-96961-6 1/4" x 1" x 1/8" P120 24,000 100

051144-96963-0 1/4" x 1" x 1/8" P180 24,000 100

051144-96968-5 1/4" x 1-1/2" x 1/8" P60 24,000 100

051144-96969-2 1/4" x 1-1/2" x 1/8" P80 24,000 100

051144-96971-5 1/4" x 1-1/2" x 1/8" P120 24,000 100

051144-96973-9 1/4" x 1-1/2" x 1/8" P180 24,000 100

051144-14024-4 3/8" x 1" x 1/8" P60 24,000 100

051144-14023-7 3/8" x 1" x 1/8" P80 24,000 100

051144-14022-0 3/8" x 1" x 1/8" P120 24,000 100

051144-97008-7 3/8" x 1" x 1/8" P180 24,000 100

051144-97013-1 3/8" x 1-1/2" x 1/8" P60 24,000 100

051144-20417-8 3/8" x 1-1/2" x 1/8" P80 24,000 100

051144-97015-5 3/8" x 1-1/2" x 1/8" P120 24,000 100

051144-97017-9 3/8" x 1-1/2" x 1/8" P180 24,000 100

051144-97041-4 1/2" x 1" x 1/8" P60 24,000 100

051144-97042-1 1/2" x 1" x 1/8" P80 24,000 100

051144-97044-5 1/2" x 1" x 1/8" P120 24,000 100

051144-14028-2 1/2" x 1-1/2" x 1/8" P60 24,000 100

051144-14027-5 1/2" x 1-1/2" x 1/8" P80 24,000 100

051144-14026-8 1/2" x 1-1/2" x 1/8" P120 24,000 100

051144-97059-9 1/2" x 1-1/2" x 1/8" P180 24,000 100

051144-97162-6 3/4" x 1-1/2" x 3/16" P60 16,000 100

051144-97163-3 3/4" x 1-1/2" x 3/16" P80 16,000 100

051144-97165-7 3/4" x 1-1/2" x 3/16" P120 16,000 100

3M™ Cartridge Rolls 341D (cont.)

UPC Dia. x L x CH Grade Max. RPM Qty./Case

Full Taper

051144-97239-5 3/8" x 1" x 1/8" P60 24,000 100

051144-97240-1 3/8" x 1" x 1/8" P80 24,000 100

051144-97242-5 3/8" x 1" x 1/8" P120 24,000 100

051144-97244-9 3/8" x 1" x 1/8" P180 24,000 100

051144-97248-7 3/8" x 1-1/2" x 1/8" P60 24,000 100

051144-97249-4 3/8" x 1-1/2" x 1/8" P80 24,000 100

051144-97251-7 3/8" x 1-1/2" x 1/8" P120 24,000 100

051144-97257-9 1/2" x 1" x 1/8" P60 24,000 100

051144-97259-3 1/2" x 1" x 1/8" P120 24,000 100

051144-14034-3 1/2" x 1-1/2" x 1/8" P60 24,000 100

051144-14033-6 1/2" x 1-1/2" x 1/8" P80 24,000 100

051144-14032-9 1/2" x 1-1/2" x 1/8" P120 24,000 100

051144-97267-8 1/2" x 1-1/2" x 1/8" P180 24,000 100

3M™ Square and Cross Pads

Square pads are ideal for fast grinding/blending of channels, fillets, corners and spotting on flat surfaces. As the square pads

rotate, the corners exert a fast biting action and gradually wear down to expose fresh abrasive material. Cross pads are used for

close tolerance polishing of small radii and channels, deburring the ends and insides of tubing and other special applications.

3M™ Cross Pads 747D

• 3M ceramic aluminum oxide blend

abrasive grain on an X wt. cloth backing

• Super aggressive cut rate and durability

• Contains grinding aid for cooler cutting on heat sensitive alloys

UPC Size Grade Max RPM Qty./Case

8 Ply; 1/4–20 Eyelet

051141-20368-3 1-1/2" x 1-1/2" x 1/2" 60 24,000 100

051141-20369-0 1-1/2" x 1-1/2" x 1/2" 80 24,000 100

051141-20372-0 1-1/2" x 1-1/2" x 1/2" P100 24,000 100

051141-20379-9 1-1/2" x 1-1/2" x 1/2" P120 24,000 100

051141-20380-5 2" x 2" x 1/2" 60 18,000 100

051141-20367-6 2" x 2" x 1/2" P100 18,000 100

051141-20375-1 2" x 2" x 3/4" 80 18,000 100

3M™ Cross Pads 341D

• Premium aluminum oxide on an

X wt. cloth backing

• Long life and fast cut

• General purpose pads at a value price

UPC Size Grade Max RPM Min./Case

8 or 10 Ply; 8–32 Eyelet

051141-27368-6 1" x 1" x 3/8" 60 24,000 50/100

051141-27369-3 1" x 1" x 3/8" 80 24,000 50/100

051141-27370-9†1" x 1" x 3/8" P120 24,000 50/100

051141-27371-6 1-1/2" x 1-1/2" x 1/2" 60 24,000 50/100

051141-27372-3 1-1/2" x 1-1/2" x 1/2" 80 24,000 50/100

051141-27373-0 1-1/2" x 1-1/2" x 1/2" P120 24,000 50/100

10 Ply; 8–32 Eyelet

051141-27374-7 2" x 2" x 1/2" 60 18,000 50/100

051141-27375-4 2" x 2" x 1/2" 80 18,000 50/100

051141-27376-1 2" x 2" x 1/2" P120 18,000 50/100

051141-27377-8 2" x 2" x 3/4" 60 18,000 50/100

051141-27378-5 2" x 2" x 3/4" 80 18,000 50/100

051141-27379-2 2" x 2" x 3/4" P120 18,000 50/100

051144-97750-5 2-1/2" x 2-1/2" x 3/4" 60 18,000 50/100

8 or 10 Ply; 1/4–20 Eyelet

051141-27380-8 3" x 3" x 1" 60 18,000 50/100

051141-27381-5 3" x 3" x 1" 80 18,000 50/100

051141-27382-2†3" x 3" x 1" P120 18,000 50/100

051144-97760-4 3" x 3" x 1-1/2" 60 18,000 50/100

051144-97766-6 3-1/2" x 3-1/2" x 1-1/2" 80 15,000 50/100

051144-97768-0 4" x 4" x 1" 60 12,000 50/100

051144-98880-2 5" x 5" x 1-1/2" 60 10,000 50/100

051144-97783-3 6" x 6" x 1-1/2" 60 9,000 50/100

† Made-to-Order

3M™ Square Pads 747D

• 3M ceramic aluminum oxide

blend abrasive grain on an X wt.

cloth backing

• Super aggressive cut rate and durability

• Contains grinding aid for cooler cutting on heat sensitive alloys

UPC Size Grade Max RPM Qty./Case

1/4–20 Eyelet

051141-27359-4†2" x 2" x 1/2" 60 12,000 100

051141-27360-0†2" x 2" x 1/2" 80 12,000 100

051141-27361-7†2" x 2" x 1/2" P120 12,000 100

051141-27362-4†2" x 2" x 3/8" 60 12,000 100

051141-27363-1†2" x 2" x 3/8" 80 12,000 100

051141-27364-8†2" x 2" x 3/8" P120 12,000 100

051141-27365-5†3" x 3" x 1/2" 60 9,000 100

051141-27366-2†3" x 3" x 1/2" 80 9,000 100

051141-27367-9†3" x 3" x 1/2" P120 9,000 100

† Made-to-Order

3M™ Square Pads 341D

• Premium aluminum oxide on an

X wt. cloth backing

• Long life and fast cut

• General purpose pads at a value price

UPC Size Grade Max RPM Min./Case

1/4–20 Eyelet

051141-27353-2†2" x 2" x 3/8" 60 12,000 50/100

051141-27354-9†2" x 2" x 3/8" 80 12,000 50/100

051141-27355-6†2" x 2" x 3/8" P120 12,000 50/100

051141-27350-1 2" x 2" x 1/2" 60 12,000 50/100

051141-27351-8 2" x 2" x 1/2" 80 12,000 50/100

051141-27352-5 2" x 2" x 1/2" P120 12,000 50/100

051144-97723-9 3" x 3" x 1/4" P120 9,000 50/100

051141-27356-3†3" x 3" x 1/2" 60 9,000 50/100

051141-27357-0†3" x 3" x 1/2" 80 9,000 50/100

051141-27358-7†3" x 3" x 1/2" P120 9,000 50/100

† Made-to-Order

Specialty Abrasives

3M™ Square and Cross Pads

Specialty Abrasives

3M™ Bands

3M™ Bands 747D

• 3M ceramic aluminum oxide blend

abrasive grain on an X wt. cloth backing

• Long life and fast cut

• Contains grinding aid for cooler

cutting on heat sensitive alloys

UPC Dia. x W Grade Max. RPM Qty./Case

051144-80765-9 1/2" x 1" 50 15,000 100

051144-80769-7 1/2" x 1" 60 15,000 100

051144-80773-4 1/2" x 1" 80 15,000 100

051144-80766-6 1" x 1" 50 18,000 100

051144-80770-3 1" x 1" 60 18,000 100

051144-80774-1 1" x 1" 80 18,000 100

051144-80782-6 1" x 1" P120 18,000 100

051144-80771-0 2" x 1" 60 11,000 100

051144-80775-8 2" x 1" 80 11,000 100

051144-80783-3 2" x 1" P120 11,000 100

3M™ Bands

Great for getting at those hard to reach places and contours. Ideal for removing parting lines, imperfections and burrs.

Use with 3M™ Die Grinders and 3M™ Rubber Slotted Expander Wheel or 3M™ Rubber Cushion Polishing Wheel.

3M™ Bands 341D

• Aluminum oxide on and

X wt. cloth backing

• Fast cut and long life

• General purpose evenrun

bands at a value price

UPC Dia. x W Grade Max. RPM Qty./Case

051144-40243-4 1/4" x 1/2" P80 23,000 100

051144-97428-3 1/4" x 1/2" P120 23,000 100

051144-27446-7 1/2" x 1/2" P36 30,000 100

051144-40228-1 1/2" x 1/2" P60 30,000 100

051144-40227-4 1/2" x 1/2" P80 30,000 100

051144-40252-6 1/2" x 1/2" P120 30,000 100

051144-97458-0 1/2" x 1" P36 15,000 100

051144-40225-0 1/2" x 1" P60 15,000 100

051144-40224-3 1/2" x 1" P80 15,000 100

051144-11973-8 1/2" x 1" P120 15,000 100

051144-11976-9 3/4" x 1" P36 17,000 100

051144-40221-2 3/4" x 1" P60 17,000 100

051144-40220-5 3/4" x 1" P80 17,000 100

051144-40219-9 3/4" x 1" P120 17,000 100

051144-11977-6 3/4" x 1-1/2" P36 10,000 100

051144-40241-0 3/4" x 1-1/2" P80 10,000 100

051144-40214-4 1" x 1" P36 18,000 100

051144-40211-3 1" x 1" P60 18,000 100

051144-40210-6 1" x 1" P80 18,000 100

051144-40208-3 1" x 1" P120 18,000 100

051144-40207-6 1" x 1-1/2" P36 10,000 100

051144-11980-6 1" x 1-1/2" P60 10,000 100

051144-40205-2 1" x 1-1/2" P80 10,000 100

051144-40203-8 1-1/2" x 1" P36 14,000 100

051144-40202-1 1-1/2" x 1" P60 14,000 100

051144-40200-7 1-1/2" x 1-1/2" P36 10,000 100

051144-40197-0 1-1/2" x 1-1/2" P60 10,000 100

051144-40196-3 1-1/2" x 1-1/2" P80 10,000 100

051144-40274-8 1-1/2" x 1-1/2" P120 10,000 100

051144-40267-0 1-1/2" x 2" P60 8,000 100

051144-40192-5 2" x 1" P60 11,000 100

051144-40187-1 2" x 2" P36 6,000 100

051144-40184-0 2" x 2" P60 6,000 100

051144-40183-3 2" x 2" P80 6,000 100

051144-40178-9 3" x 3" P36 3,000 50

051144-40175-8 3" x 3" P60 3,000 50

051144-40174-1 3" x 3" P80 3,000 50

051144-40172-7 3" x 3" P120 3,000 50

Specialty Abrasives

Scotch-Brite™ Specialty Abrasives

Make tough jobs easy with these Scotch-Brite™ specialty abrasives. Unique constructions for use on contours and flat areas —

on metal, wood, paint, coatings and more.

Scotch-Brite™ Radial

Bristle Brush, TA

• Excellent replacement

for wire brushes

• Use on bench motors for general

purpose cleaning applications

• No flying wires yet higher cut rates

• Very strong and flexible

• Comes with adapters for multiple shaft sizes

(1/2", 5/8", 3/4", 7/8", 1", 2" and 8")

UPC Dia. x W Grade Color Max. RPM Qty./Case

048011-24279-8 3" x 3/8" 50 Green 25,000 40

048011-24280-4 3" x 3/8" 80 Yellow 25,000 40

048011-24281-1 3" x 3/8" 120 White 25,000 40

048011-27603-8 6" x 1/2" x 1" 36 Brown 6,000 5

048011-27605-2 6" x 1/2" x 1" 50 Green 6,000 5

048011-27606-9 6" x 1/2" x 1" 80 Yellow 6,000 5

Scotch-Brite™ EXL Unitized Mounted Points

• EXL unitized material dressed to six

different ANSI shapes for delicate

deburring and finishing of critical parts

UPC No. Size Shape Density Grade Qty./Case

1/4" Shank

048011-64794-4 7/8" x 2" x 1/4" A11 8 A MED 50

048011-64795-1 7/8" x 2" x 1/4" A11 8 S FIN 50

048011-64796-8 1" x 1" x 1/4" A21 8 A MED 50

048011-64797-5 1" x 1" x 1/4" A21 8 S FIN 50

1/8" Shank

048011-64798-2 1/2" x 1/2" x 1/8" B121 8 A MED 50

048011-64799-9 1/2" x 1/2" x 1/8" B121 8 A CRS 50

048011-64800-2 3/8" x 3/4" x 1/8" B52 8 A CRS 50

048011-64801-9 3/8" x 3/4" x 1/8" B52 8 A MED 50

048011-64802-6 3/8" x 3/4" x 1/8" B52 8 S FIN 50

048011-64803-3 1/4" x 1/2" x 1/8" W163 8 A CRS 50

048011-64804-0 1/4" x 1/2" x 1/8" W163 8 S FIN 50

048011-64805-7 1/4" x 1/2" x 1/8" W163 8 A MED 50

048011-64806-4 1/2" x 1/2" x 1/8" W185 8 A CRS 50

048011-64807-1 1/2" x 1/2" x 1/8" W185 8 A MED 50

048011-64808-8 1/2" x 1/2" x 1/8" W185 8 S FIN 50

W185 W163 B52 B121 A21 A11

Scotch-Brite™ Flap Brush

CPFB-S and CPFB-R+

• Heavy-duty brush

• Excellent for removing handling

marks and surface imperfections

• Available on 1/4" shaft (CPFB-S)

or 3M™ Roloc™+ attachment

system (CPFB-R+)

UPC Dia. x W x Shaft Grade Max. RPM Qty./Case

CPFB-S

048011-16622-3 2" x 1" x 1/4" A MED 12,000 25

048011-05974-7 3" x 1-3/4" x 1/4" A MED 8,500 10

CPFB-R+

048011-14588-4 3" x 1-3/8" A MED 8,000 10

Scotch-Brite™ Flap Brush

CFFB-S and CFFB-R

• Ideal for decorative finishes

and light deburring applications

• Available on 1/4" shaft (CFFB-S)

or 3M™ Roloc™+ attachment

system (CFFB-R)

UPC Dia. x W x Shaft Grade Max. RPM Qty./Case

CFFB-S

048011-05975-4 3" x 1-3/4" x 1/4" A CRS 8,500 10

048011-14781-9 3" x 1-3/4" x 1/4" S FIN 8,500 10

CFFB-R

048011-14587-7 3" x 1-3/8" A CRS 8,000 10

048011-14783-3 3" x 1-3/8" S FIN 8,000 10

Scotch-Brite™ Combi Wheel,

Combi-S

• Made of alternating flaps of coated

abrasive and Scotch-Brite™ web

• Provides aggressive cut and

fine finishes

UPC Dia. x W x Shaft Grade Max. RPM Qty./Case

CFFB-S

051144-80801-4 3" x 1-3/4" x 1/4" 80 8,000 10

051144-80678-2 3" x 1-3/4" x 1/4" P120 8,000 10

051144-80799-4 3" x 1-3/4" x 1/4" P180 8,000 10

Specialty Abrasives

Scotch-Brite™ Specialty Abrasives

Scotch-Brite™ CPD5-R

and CPD5-S Discs

• Five discs made of a durable web,

ganged together on a shaft

• Use for satin or antique finishing

as well as light- to medium-duty

cleaning applications

• Available on a 1/4" shaft (CPD5-S) or

3M™ Roloc™+ attachment system (CPD5-R)

UPC Dia. x W x (Shaft) Grade Max. RPM Qty./Case

CPD5-S

048011-14593-8 3" x 1-1/4" x 1/4" A MED 10,000 10

048011-14779-6 4" x 1-1/4" x 1/4" A MED 8,000 10

CPD5-R

048011-14594-5 3" x 1-1/4" A MED 10,000 10

048011-14590-7 4" x 1-1/4" A MED 8,000 10

Scotch-Brite™ Stars

• Perfect for polishing internal

diameters of pipe and tubing

• Conformable Scotch-Brite™

construction assures complete

cleaning and polishing of all surfaces

UPC Diameter Grade Max. RPM Qty./Case

048011-13370-6 1-1/2" A CRS 24,000 100

048011-13800-8 1-1/2" A VFN 24,000 100

048011-13371-3 2" A CRS 24,000 100

048011-13803-9 2" A VFN 24,000 100

048011-13372-0 3" A CRS 18,000 50

048011-13802-2 3" A VFN 18,000 50

048011-13373-7 4" A CRS 18,000 50

048011-13804-6 4" A VFN 18,000 50

Scotch-Brite™ Clean

and Strip Discs D2

• Aggressive web is

excellent for cleaning

welds, rust, paint

and coatings

UPC Dia. x W x Shaft Grade Max. RPM Qty./Case

048011-14780-2 4" x 1" x 1/4" S XCS 8,000 10

048011-14784-0 4" x 1" S XCS 8,000 8

Scotch-Brite™ Cross Buffs

• Versatile and flexible shape

ideal for light deburring, cleaning,

finishing and polishing internal

diameters and hard to reach areas

• Available in A VFN for high luster finishes or A MED for

more aggressive applications requiring increased durability

UPC Diameter Grade Max. RPM Qty./Case

048011-64299-4 1" x 3/8" x 2 PLY x 8–32 A MED 20,000 50

048011-64446-2 1" x 3/8" x 2 PLY x 8–32 A VFN 20,000 50

048011-64305-2 1-1/2" x 3/8" x 2 PLY x 8–32 A MED 20,000 50

048011-64526-1 1-1/2" x 3/8" x 2 PLY x 8–32 A VFN 20,000 50

048011-64447-9 1-1/2" x 1/2" x 2 PLY x 8–32 A VFN 20,000 100

048011-64312-0 2" x 1/2" x 2 PLY x 8–32 A MED 12,000 25

048011-64433-2 2" x 1/2" x 2 PLY x 8–32 A VFN 12,000 25

Scotch-Brite™ Unitized

Wheel Pack 990S

• Contains several Scotch-Brite™

external Unitized Wheels

1" x 1" x 3/16" and 3" x 1/4" x 3/8"

in a variety of densities and grades

• Also includes 936 and 990 mandrels

UPC Size Min./Case

048011-18245-2 1" x 1" x 3/16" and 3" x 1/4" x 3/8" 1/5

3M™ Power Tools for Specialty Abrasives

Specialty Abrasives

3M™ Match and Finish Sander

• Generate straight-line scratches for finishing stainless steel and other metals

• Front to back motion helps prevent curved scratches

• Easy to control for reduced start/stop marks

• Easy screw-on/screw-off attachments

• Design for use with Scotch-Brite™ Match and Finish Flap Brushes, 3M™ Abrasive Belts or Scotch-Brite™ Belts*

Model No.

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm) Air Inlet Thread

Airflow Rate

SCFM (LPM) Shaft Size UPC

28659 1 (744) 3,500 4.6 (2.1) 13.5 (343) 1/4" NPT 37 (1,048) 5/8"–11 EXT 051141-28659-4

*To run belt products, 3M™ Expander Wheel (28718) and Adapter Kit (28719) are required. See page 68.

28659

3M™ Die Grinders — 0.5 HP

• Ideal for a variety of polishing, buffing, shaping and deburring applications

• 3M™ Gripping Material for added comfort and reduced vibration

• Available in extended shaft models

Model No.

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm) Air Inlet Thread Collet Size

Airflow Rate

SCFM (LPM) UPC

28330 0.5 (372) 18,000 1.13 (.512) 6.88 (174.6) 1/4" NPT 1/4" 26 (736) 051141-28330-2

28331 0.5 (372) 18,000* 1.54 (.697) 10.63 (269.9) 1/4" NPT 1/4" 26 (736) 051141-28331-9

28332 0.5 (372) 4,000 1.58 (.717) 8.88 (200) 1/4" NPT 1/4" 26 (736) 051141-28332-6

*With extension

28330

28331

28332

3M™ Die Grinders — 0.3 HP

• Ideal for deburring, blending, finishing and polishing intricate and hard-to-reach areas

• 3M™ Gripping Material for added comfort and reduced vibration

• Available in extended shaft models

Model No.

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm) Air Inlet Thread Collet Size

Airflow Rate

SCFM (LPM) UPC

28630 0.3 (224) 25,000 1.40 (.639) 10 (254) 1/4" NPT 1/4"†17 (481) 051141-28630-3

28629 0.3 (224) 25,000 0.89 (.405) 6.125 (156) 1/4" NPT 1/4"†17 (481) 051141-28629-7

28628 0.3 (224) 18,000 1.52 (.690) 10 (254) 1/4" NPT 1/4"†17 (481) 051141-28628-0

28627 0.3 (224) 18,000 1.15 (.522) 7.25 (184) 1/4" NPT 1/4"†17 (481) 051141-28627-3

†Includes 1/8" collet insert

28629/28627

28630/28628

3M™ Die Grinders — 1 HP

• Powerful 1 HP die grinders are excellent for big jobs

such as weld or stock removal

• 3M™ Gripping Material for added comfort and reduced vibration

Model No.

Motor

HP (W) Max RPM

Weight

Pound (kg)

Length

Inch (mm) Air Inlet Thread Collet Size

Airflow Rate

SCFM (LPM) UPC

20237 1 (744) 20,000 1.69 (.77) 7.75 (196.9) 1/4" NPT 1/4" 37 (1,048) 051141-20237-2

20238 1 (744) 18,000 1.69 (.77) 7.75 (196.9) 1/4" NPT 1/4" 37 (1,048) 051141-20238-9

28770 1 (744) 18,000 2.60 (1.2) 13 (318) 1/4" NPT 1/4" 37 (1,084) 051141-28770-6

20239 1 (744) 12,000 2.06 (.93) 10 (254) 1/4" NPT 1/4" 37 (1,048) 051141-20239-6

20240 1 (744) 8,000 2.06 (.93) 10 (254) 1/4" NPT 1/4" 37 (1,048) 051141-20240-2

2024020238

2023920237

Product Name UPC Qty./Case For Use With Size/Description Max RPM

Mandrel

No. 944

048011-13928-9 1

Scotch-Brite™ Stars for

cleaning and polishing internal

diameters of pipe and tubing

1/4" x 1/4–20 EXT 25,100

3M™ Mandrel

048011-14307-8 1

Scotch-Brite™ Cross Buffs for

cleaning and polishing internal

diameters of pipe and tubing

1/4" x 8–32 EXT

Dependent

upon abrasive product

used

3M™ Mandrels

051144-45119-7 25 Screw-type mandrels for

securing cartridge rolls to tool 1/8" x 1" x 1/4"

24,000 (1/2" and

smaller cartridge

roll diameter);

16,000 (5/8"– 3/4"

cartridge roll diameter)

051144-45117-3 25 Screw-type mandrels for

securing cartridge rolls to tool 3/16" x 1" x 1/4"

051144-45118-0 25 Screw-type mandrels for

securing cartridge rolls to tool 3/16" x 1-1/2" x 1/4"

3M™ Square

and Cross

Pad Mandrel

051144-14308-5 1

Used for holding square and

cross pads with 1/4–20 and

8–32 internal threaded inserts

1/4" x 1/4–20 EXT

Dependent upon

abrasive product used

051144-14307-8 1 1/4" x 8–32 EXT

051141-28385-2 5 1/4" x 3–48 EXT

Forked Spindle

051144-45121-0 10 For attaching utility cloth strips 1/4" x 3" N/A

3M™ Wetordry™ Sponge Pad

051131-05526-1 50 Wetordry™ Paper Sheets 2-3/4" x 5-1/2" x 3/8" N/A

3M™ Stikit™ Soft Hand Pad

051144-05530-2 5/10 Stikit™ Sheet Rolls 2-3/4" x 5-1/2" x 3/8" N/A

Specialty Abrasives

Accessories for Specialty Abrasives

Specialty Abrasives

Accessories for Specialty Abrasives

Product Name UPC Qty./Case For Use With Size/Description Max RPM

Scotch-Brite™ Pad Holder

No. 961

048011-09493-4 10

Scotch-Brite™ Hand Pads;

Provides increased leverage

and eliminates “finger” marks

3-1/2" x 4-3/4" N/A

Mini Mandrel No. 935

048011-04020-2 5

Scotch-Brite™ Strips to

clean and polish inner diameters

and other tight areas

2-7/8" x 1/4" 14,000

3M™ Match and Finish Rubber

Slotted Expander Wheel Use 3M™ Expander Wheel and Adapter Kit with 3M™ Match and Finish Sander

051141-28718-8 1 3-1/2" x 15-1/2" belts 5" x 3-1/2" x 1" AH 3,500

051141-27819-5 1 To mount 28718 wheel on

3M™ Match and Finish Sander 1" x 5/8–11 INT N/A

100

Superabrasive Wheels for Cutting Tool Manufacturing

The superabrasive products featured in this catalog are

3M’s best, “go-to” wheels for cutting tool applications

ranging from short runs and re-sharpening to “lights-out”

and long production runs. All are in-stock, and are available

for fast, two-day shipping within the U.S. If you require

an item that is not listed, please contact your 3M

Customer Service Representative at 1-800-736-2500.

Superabrasives

Typical Abrasive Wheels

Used for Round Tool Grinding

Gashing

1V1 (30°, 45°)

240–320 grit

Cut-off

1A1R

80–100 grit

Primary Relief

11V9, 11A2

240–600 grit

2Secondary Relief

11V9, 11A2

240–600 grit

Fluting

1V1, 1A1, 1F1

(5°, 10°, 20°)

180–240 grit

6OD Grinding

1A1

220–320 grit

End Work

11A2, 11V9, 11V5

150–220 grit

Gashing: Grinding a slot or notch along the cutting face to

allow for chip flow

Primary Relief: Removing material directly behind the cutting

edge to provide clearance

Secondary Relief: A slight bevel next to the primary relief

Cut-off: Using a thin wheel to trim blanks to length; Typically

used on the cutting end of the tool when re-grinding and on

the shank end when forming a blank

OD Grinding: Grinding to final diameter

Fluting: Flutes are the helical or straight grooves in the body

of the tool; This provides a pathway to permit the removal of

chips, and to allow coolants to reach the cutting surface

End Work: Grinding a small clearance, or relief angle, on the

face (tip) of the tool

When to use Diamond vs. CBN

For optimal grinding results, make sure you know what

material the tools are made of.

Round

tools can

be made

out of any

of these

materials

Diamond Abrasive

• Carbide

• Non-ferrous

metals

• PCD

• Cermets

• Polycrystalline

CBN/Diamond

(PCBN)

CBN Abrasive

• Tool steel

• High speed steel

2-Day

Shipping

on stock wheels

within the U.S.!

Can’t ﬁnd

what you need?

Simply provide us with the following information,

and we’ll help you select the optimal product for your application.

Contact 3M Customer Service for more information.

E-mail Fax Phone

superabrasives@mmm.com 973-884-0392 800-736-2500

To order, specify: Wheel Shape, Dimension, Mineral, Grade and Product ID

1. Are you manufacturing new tools or resharpening?

Manufacturing Resharpening

2. What is your application?

Fluting OD Grinding Step Grinding

Gashing Primary Relief End Work

Secondary Relief Other

3. What kind of material are you grinding?

Carbide High Speed Steel Other

4. What type of equipment are you using?

CNC Grinder Manual Tool & Cutter Other

If CNC Grinder...what is the model?

ANCA — HP Walters— HP

Rollomatic — HP Tru Tech— HP

Other HP

5. What type of coolant are you using?

Straight Oil Water Based Other

Chilled? Yes No

6. What is the size/grade of your wheels(s)?

Shape Diameter Thickness Hole Grade

1F1

1V1

11A2

12A2

11V9

12V9

1A1R

Other:

Also Specify:

Radius Rim Width

Face Angle Rim Width

7. What do you want to change/accomplish?

Cut Faster Less Frequent Sticking Other

Better Finishing Run Longer Without Re-truing

8. Which wheels have you tried?

Which 3M wheels in this brochure have you tested?

If none, what wheels do you currently use?

101

Flutes are the helical or straight grooves in the body of the tool.

This provides a pathway to permit the removal of chips, and to

allow coolants to reach the cutting surface.

Flute Grinding

Product Performance (Diamond / CBN)

654DJ / 144DI

• Phenolic resin bond

• Good cut rate/stock removal

• Holds shape

• Use for lower temperature operations

• Can be run with water

• Ideal for small re-grind shops

or in-house re-sharpening

665PK / 164PK

• Polyimide resin bond

• Higher cut rate/fast stock removal

• Better form retention

• Designed for higher temperature

operations

650HJ / 154HK

• Hybrid bond

• Fastest cut rate

• Best form retention

• Designed for higher temperature operations than polyimide bond

• Reduced frequency of dressing and minimal “white sticking” required

• Ideal for long, uninterrupted runs

Fluting Wheel Performance Characteristics

3M has six standard constructions that are ideal for a variety

different operations.

LOW

HIGH

Form Retention

Cut Rate

654DJ

144DI

665PK

164PK

650HJ

154HK

3M™ Fluting Wheel — Shape 1A1 (cont.)

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

Diamond Abrasive — 1A1 (cont.)

5" × 1/2" × AH*

X = 3/8

D220 H 650HJ 051141-31276-7 1

D220 P 665PK 051141-54820-3 1

D220 R 654DJ 051141-31294-1 1

5" × 3/4" × AH*

X = 3/8

D220 H 650HJ 051141-54916-3 1

D220 P 665PK 051141-54917-0 1

D220 R 654DJ 051141-54918-7 1

6" × 1/2" × AH*

X = 3/8

D220 H 650HJ 051141-55462-4 1

D220 P 665PK 051141-55464-8 1

D220 R 654DJ 051141-55463-1 1

CBN Abrasive — 1A1

4" × 1/2" × AH*

X = 3/8

B180 H 154HK 051141-55465-5 1

B180 P 164PK 051141-55466-2 1

B180 R 144DI 051141-55467-9 1

5" × 1/2" × AH*

X = 3/8

B180 H 154HK 051141-55468-6 1

B180 P 164PK 051141-55469-3 1

B180 R 144DI 051141-55470-9 1

6" × 1/2" × AH*

X = 3/8

B180 H 154HK 051141-55471-6 1

B180 P 164PK 051141-55472-3 1

B180 R 144DI 051141-55473-0 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

3M™ Fluting Wheel — Shape 1A1

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

Diamond Abrasive — 1A1

4" × 1/4" × AH*

X = 3/8

D220 H 650HJ 051141-31270-5 1

D220 P 665PK 051141-54806-7 1

D220 R 654DJ 051141-31288-0 1

4" × 3/8" × AH*

X = 3/8

D220 H 650HJ 051141-31273-6 1

D220 P 665PK 051141-54809-8 1

D220 R 654DJ 051141-31291-0 1

4" × 1/2" × AH*

X = 3/8

D220 H 650HJ 051141-31267-5 1

D220 P 665PK 051141-54803-6 1

D220 R 654DJ 051141-31285-9 1

5" × 1/4" × AH*

X = 3/8

D220 H 650HJ 051141-31279-8 1

D220 P 665PK 051141-54823-4 1

D220 R 654DJ 051141-31297-2 1

5" × 3/8" × AH*

X = 3/8

D220 H 650HJ 051141-31282-8 1

D220 P 665PK 051141-54828-9 1

D220 R 654DJ 051141-54800-5 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

3M™ Fluting Wheels

2-Day

Shipping

on stock wheels

within the U.S.!

Superabrasives

102

3M™ Fluting Wheels

2-Day

Shipping

on stock wheels

within the U.S.!

The wheels listed in this catalog are in stock and intended as a general starting point for the application indicated. These wheels are recommended for wet applications.

For dry applications or wheel configurations/grades not listed here, please contact your 3M Customer Service Representative at 1-800-736-2500.

VV=ANGLE

3M™ Fluting Wheel — Shape 1V1

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

Diamond Abrasive — 1V1

4" × 1/4" × AH*

X = 3/8

V = 10°

D220 H 650HJ 051141-31268-2 1

D220 P 665PK 051141-54804-3 1

D220 R 654DJ 051141-31286-6 1

4" × 1/4" × AH*

X = 3/8

V = 20°

D220 H 650HJ 051141-31269-9 1

D220 P 665PK 051141-54805-0 1

D220 R 654DJ 051141-31287-3 1

4" × 3/8" × AH*

X = 3/8

V = 10°

D220 H 650HJ 051141-31271-2 1

D220 P 665PK 051141-54807-4 1

D220 R 654DJ 051141-31289-7 1

4" × 3/8" × AH*

X = 3/8

V = 20°

D220 H 650HJ 051141-31272-9 1

D220 P 665PK 051141-54808-1 1

D220 R 654DJ 051141-31290-3 1

4" × 1/2" × AH*

X = 3/8

V = 10°

D220 H 650HJ 051141-31265-1 1

D220 P 665PK 051141-54801-2 1

D220 R 654DJ 051141-31283-5 1

4" × 1/2" × AH*

X = 3/8

V = 20°

D220 H 650HJ 051141-31266-8 1

D220 P 665PK 051141-54802-9 1

D220 R 654DJ 051141-31284-2 1

5" × 1/4" × AH*

X = 3/8

V = 10°

D220 H 650HJ 051141-31277-4 1

D220 P 665PK 051141-54821-0 1

D220 R 654DJ 051141-31295-8 1

5" × 1/4" × AH*

X = 3/8

V = 20°

D220 H 650HJ 051141-31278-1 1

D220 P 665PK 051141-54822-7 1

D220 R 654DJ 051141-31296-5 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

3M™ Fluting Wheel — Shape 1V1 (cont.)

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

Diamond Abrasive — 1V1 (cont.)

5" × 3/8" × AH*

X = 3/8

V = 10°

D220 H 650HJ 051141-31280-4 1

D220 P 665PK 051141-54826-5 1

D220 R 654DJ 051141-31298-9 1

5" × 3/8" × AH*

X = 3/8

V = 20°

D220 H 650HJ 051141-31281-1 1

D220 P 665PK 051141-54827-2 1

D220 R 654DJ 051141-31299-6 1

5" × 1/2" × AH*

X = 3/8

V = 10°

D220 H 650HJ 051141-31274-3 1

D220 P 665PK 051141-54818-0 1

D220 R 654DJ 051141-31292-7 1

5" × 1/2" × AH*

X = 3/8

V = 20°

D220 H 650HJ 051141-31275-0 1

D220 P 665PK 051141-54819-7 1

D220 R 654DJ 051141-31293-4 1

5" × 3/4" × AH*

X = 3/8

V = 10°

D220 H 650HJ 051141-54919-4 1

D220 P 665PK 051141-54920-0 1

D220 R 654DJ 051141-54921-7 1

CBN Abrasive — 1V1

4" × 1/2" × AH*

X = 3/8

V† = 0°–20°

B180 H 154HK 051141-55474-7 1

B180 P 164PK 051141-55475-4 1

B180 R 144DI 051141-55476-1 1

5" × 1/2" × AH*

X = 3/8

V† = 0°–20°

B180 H 154HK 051141-55477-8 1

B180 P 164PK 051141-55478-5 1

B180 R 144DI 051141-55479-2 1

6" × 1/2" × AH*

X = 3/8

V† = 0°–20°

B180 H 154HK 051141-55480-8 1

B180 P 164PK 051141-55481-5 1

B180 R 144DI 051141-55482-2 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

Superabrasives

103

Wheel Performance Characteristics

3M™ Superabrasive Wheels are available in a variety of

constructions, each with its own unique characteristics.

Choose the 3M Wheel with the best balance of form

retention and cut rate for your application.

• Primary and Secondary Relief Wheels

• Gashing Wheels

• Wheels for End Work

• Less Form Retention

• Shorter Production Runs

• Free Cutting

• Fast Cutting

• Best Form Retention

• Close Tolerances

• Long Wheel Life

• Long Production Runs

• Slower Cut Rate

195DM

695DM

154PL

164HK

686HN

675PM

665HL

HIGHLOW LOWHIGH

70°

3M™ Primary and Secondary Relief Wheel —

Shape 11V9

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

Diamond Abrasive — 11V9

3-3/4" ×

1-1/2" × AH*

X = 1/8 U = 3/8

D220 H 686HN 051141-54864-7 1

D220 P 675PM 051141-54837-1 1

D220 R 695DM 051141-54869-2 1

D280 H 686HN 051141-54865-4 1

D280 P 675PM 051141-54838-8 1

D280 R 695DM 051141-54870-8 1

D320 H 686HN 051141-54866-1 1

D320 P 675PM 051141-54839-5 1

D320 R 695DM 051141-54871-5 1

D400 H 686HN 051141-54867-8 1

D400 P 675PM 051141-54840-1 1

D400 R 695DM 051141-54872-2 1

5" × 1-3/4" × AH*

X = 1/8 U = 7/16

D220 H 686HN 051141-54927-9 1

D320 H 686HN 051141-54868-5 1

D320 P 675PM 051141-54855-5 1

D320 R 695DM 051141-54887-6 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

3M™ Primary and Secondary Relief Wheel —

Shape 11V9 (cont.)

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

CBN Abrasive — 11V9

3-3/4" ×

1-1/2" × AH*

X = 1/8

U = 3/8

B220 H 164HK 051141-31244-6 1

B220 P 154PL 051141-31233-0 1

B220 R 195DM 051141-31254-5 1

5" × 1-3/4" × AH*

X = 1/8

U = 7/16

B220 H 164HK 051141-31251-4 1

B220 P 154PL 051141-31239-2 1

B220 R 195DM 051141-31261-3 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

Cutting edges are typically “relieved” to enhance chip clearance.

Primary relief involves removing material directly behind the cutting

edge. For secondary relief, a slight bevel is ground next to the

primary relief.

Primary and Secondary Relief Grinding

Superabrasives

3M™ Primary and Secondary Relief Wheels

2-Day

Shipping

on stock wheels

within the U.S.!

104

3M™ Primary and Secondary Relief Wheel —

Shape 12V9

• Can also be used for gashing (See page 106 for additional

Gashing Wheels)

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

Diamond Abrasive — 12V9

4" × 3/4" × AH*

X = 1/8; U = 3/8

S = 30°

D320 H 665HL 051141-54814-2 1

D320 P 675PM 051141-54847-0 1

D320 R 695DM 051141-54879-1 1

4" × 3/4" × AH*

X = 1/8; U = 3/8

S = 45°

D320 H 665HL 051141-54813-5 1

D320 P 675PM 051141-54846-3 1

D320 R 695DM 051141-54878-4 1

5" × 3/4" × AH*

X = 1/8; U = 3/8

S = 30°

D320 H 665HL 051141-54831-9 1

D320 P 675PM 051141-54856-2 1

D320 R 695DM 051141-54888-3 1

5" × 3/4" × AH*

X = 1/8; U = 3/8

S = 45°

D320 H 665HL 051141-54832-6 1

D320 P 675PM 051141-54857-9 1

D320 R 695DM 051141-54889-0 1

CBN Abrasive — 12V9

4" × 3/4" × AH*

X = 1/8; U = 3/8

S = 30°

B220 H 164HK 051141-31250-7 1

B220 P 154PL 051141-31236-1 1

B220 R 195DM 051141-31258-3 1

4" × 3/4" × AH*

X = 1/8; U = 3/8

S = 45°

B220 R 195DM 051141-31257-6 1

5" × 3/4" × AH*

X = 1/8; U = 3/8

S = 30°

B220 H 164HK 051141-31252-1 1

B220 P 154PL 051141-31240-8 1

B220 R 195DM 051141-31262-0 1

5" × 3/4" × AH*

X = 1/8; U = 3/8

S = 45°

B220 H 164HK 051141-31253-8 1

B220 P 154PL 051141-31241-5 1

B220 R 195DM 051141-31263-7 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

3M™ Primary and Secondary Relief Wheel —

Shape 11V5

• Can also be used for gashing (See page 106 for additional

Gashing Wheels)

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

Diamond — 11V5

4" ×1-1/2" × AH*

X = 1/4; U = 1/4

V = 30°

D320 H 665HL 051141-54895-1 1

D320 P 675PM 051141-54894-4 1

D320 R 695DM 051141-54893-7 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

70°

V= ANGLE

The wheels listed in this catalog are in stock and intended as a general starting point for the application indicated. These wheels are recommended for wet applications.

For dry applications or wheel configurations/grades not listed here, please contact your 3M Customer Service Representative at 1-800-736-2500.

Superabrasives

3M™ Primary and Secondary Relief Wheels

2-Day

Shipping

on stock wheels

within the U.S.!

105

106

3M™ Gashing Wheels

3M™ Gashing Wheel — Shape 1V1 (cont.)

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

CBN Abrasive — 1V1

4 × 3/8 × AH*

X = 3/8

V= 30°

B220 P 154PL 051141-31237-8 1

B220 R 195DM 051141-31259-0 1

4 × 3/8 × AH*

X = 3/8

V = 45°

B220 P 154PL 051141-31238-5 1

B220 R 195DM 051141-31260-6 1

5 × 3/8 × AH*

X = 3/8

V = 30°

B220 P 154PL 051141-31242-2 1

5 × 3/8 × AH*

X = 3/8

V = 45°

B220 P 154PL 051141-31243-9 1

B220 R 195DM 051141-31264-4 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

3M™ Gashing Wheel — Shape 1V1

• Wheel shapes 12V9 and 11V5 are also commonly used for gashing

(See page 105)

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

Diamond Abrasive — 1V1

4 × 1/4 × AH*

X = 3/8

V = 30°

D280 H 665HL 051141-54810-4 1

D280 P 675PM 051141-54842-5 1

D280 R 695DM 051141-54875-3 1

4 × 3/8 × AH*

X = 3/8

V =20°

D320 H 665HL 051141-54815-9 1

D320 P 675PM 051141-54848-7 1

D320 R 695DM 051141-54880-7 1

4 × 3/8 × AH*

X = 3/8

V= 30°

D320 H 665HL 051141-54816-6 1

D320 P 675PM 051141-54849-4 1

D320 R 695DM 051141-54881-4 1

4 × 3/8 × AH*

X = 3/8

V = 45°

D320 H 665HL 051141-54817-3 1

D320 P 675PM 051141-54850-0 1

D320 R 695DM 051141-54882-1 1

5 × 3/8 × AH*

X = 3/8

V = 20°

D320 H 665HL 051141-54833-3 1

D320 P 675PM 051141-54858-6 1

D320 R 695DM 051141-54890-6 1

5 × 3/8 × AH*

X = 3/8

V = 30°

D320 H 665HL 051141-54834-0 1

D320 P 675PM 051141-54859-3 1

D320 R 695DM 051141-54891-3 1

5 × 3/8 × AH*

X = 3/8

V = 45°

D320 H 665HL 051141-54835-7 1

D320 P 675PM 051141-54860-9 1

D320 R 695DM 051141-54926-2 1

6 × 3/8 × AH*

X = 3/8

V = 30°

D280 H 665HL 051141-54836-4 1

D280 P 675PM 051141-54861-6 1

D280 R 695DM 051141-54892-0 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

VV=ANGLE

Gashing involves grinding a slot or notch along the cutting face to

allow for chip ﬂow.

Gashing

Superabrasives

2-Day

Shipping

on stock wheels

within the U.S.!

107

Grinding a small clearance, or relief, angle on the face (tip) of the tool

to reduce the contact area between the tool and workpiece.

End Work

The wheels listed in this catalog are in stock and intended as a general starting point for the application indicated. These wheels are recommended for wet applications.

For dry applications or wheel configurations/grades not listed here, please contact your 3M Customer Service Representative at 1-800-736-2500.

70°

3M™ Wheel for End Work — Shape 11V2

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

Diamond Abrasive — 11V2

4" × 1-1/2" × AH*

X = 1/4

W = 1/4

D220 H 665HL 051141-54862-3 1

D220 P 675PM 051141-54841-8 1

D220 R 695DM 051141-54873-9 1

D320 H 665HL 051141-54863-0 1

D320 P 675PM 051141-54843-2 1

D320 R 695DM 051141-54876-0 1

CBN Abrasive — 11V2

4" × 1-1/2" × AH*

X = 1/4

W = 1/4

B220 H 164HK 051141-31248-4 1

B220 P 154PL 051141-31234-7 1

B220 R 195DM 051141-31255-2 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

3M™ Wheel for End Work — Shape 11A2

Dimensions

D × T × AH* Grade Bond** Prod ID UPC Min./Case

Diamond Abrasive — 11A2

4" × 1-1/4" × AH*

X = 1/4

W = 1/4

D320 H 665HL 051141-54811-1 1

D320 P 675PM 051141-54844-9 1

D320 R 695DM 051141-54922-4 1

D220 R 695DM 051141-54874-6 1

4" × 1-1/4" × AH*

X = 1/4

W = 3/8

D320 H 665HL 051141-54812-8 1

D320 P 675PM 051141-54845-6 1

D320 R 695DM 051141-54877-7 1

5" × 1-1/2" × AH*

X = 1/4

W = 1/4

D220 H 665HL 051141-54824-1 1

D220 P 675PM 051141-54851-7 1

D220 R 695DM 051141-54883-8 1

D320 H 665HL 051141-54829-6 1

D320 P 675PM 051141-54853-1 1

D320 R 695DM 051141-54885-2 1

5" × 1-1/2" × AH*

X = 1/4

W = 3/8

D220 H 665HL 051141-54825-8 1

D220 P 675PM 051141-54852-4 1

D220 R 695DM 051141-54884-5 1

D320 H 665HL 051141-54830-2 1

D320 P 675PM 051141-54854-8 1

D320 R 695DM 051141-54886-9 1

CBN Abrasive — 11A2

4" × 1-1/4" × AH*

X = 1/4

W = 1/4

B220 H 164HK 051141-31249-1 1

B220 P 154PL 051141-31235-4 1

B220 R 195DM 051141-31256-9 1

4" × 1-1/4" × AH*

X = 1/4

W = 3/8

B220 H 164HK 051141-54923-1 1

B220 P 154PL 051141-54924-8 1

B220 R 195DM 051141-54925-5 1

* Arbor hole is made to customer spec. Please specify on order.

** H=Hybrid P=Polyimide R=Resin

Superabrasives

3M™ Wheels for End Work

2-Day

Shipping

on stock wheels

within the U.S.!

108

Performance Characteristics

• Less Form Retention

• Shorter Production Runs

• Free Cutting

• Fast Cutting

• Best Form Retention

• Close Tolerances

• Long Wheel Life

• Long Production Runs

• Slower Cut Rate

654BJ

654BK

664BL

675BM

HIGHLOW LOWHIGH

3M™ Cut-Off Wheel —

Shape 1A1R

• Thin abrasive wheels used to trim blanks to length

• Typically used on the cutting end of the tool when

re-grinding and on the shank end when forming a blank

Dimensions

D × T × AH Grade Prod ID UPC Min./Case

Diamond Abrasive — 1A1R

6" × 0.35" × 1-1/4"

X = 1/4

D100 654BJ 051141-54951-4 1

D100 654BK 051141-30581-3 1

D100 675BM 051141-54952-1 1

D120 664BL 051141-54953-8 1

D220 654BJ 051141-54954-5 1

3M™ Dressing Wheels

• Silicon carbide dressing wheels

are used to true and dress

superabrasive grinding wheels

Dimensions

D × T × AH Grade* Prod ID UPC Min./Case

Silicon Carbide Abrasive

8" × 1/2" × 1-1/4" C80 400TI 051141-54900-2 1

GC80 400TI 051141-54906-4 1

8" × 1/4" × 1-1/4"

C80 400TI 051141-54901-9 1

C80 400TK 051141-54910-1 1

GC80 400TI 051141-54907-1 1

GC80 400TG 051141-54896-8 1

GC80 400TH 051141-54898-2 1

GC220 400TI 051141-54905-7 1

* GC = Green Silicon Carbide — Premium quality for longer life

C = Black Silicon Carbide — Standard quality, softer construction provides freer and faster cut

3M™ Dressing Wheels (cont.)

Dimensions

D × T × AH Grade* Prod ID UPC Min./Case

Silicon Carbide Abrasive

8" × 3/4" × 1-1/4"

C80 400TI 051141-54902-6 1

C80 400TK 051141-54911-8 1

GC80 400TI 051141-54908-8 1

8" × 3/8" × 1-1/4"

C80 400TI 051141-54903-3 1

C80 400TK 051141-54912-5 1

GC80 400TH 051141-54899-9 1

GC80 400TG 051141-54897-5 1

GC80 400TI 051141-54909-5 1

GC120 400TI 051141-54904-0 1

* GC = Green Silicon Carbide — Premium quality for longer life

C = Black Silicon Carbide — Standard quality, softer construction provides freer and faster cut

2-Day

Shipping

on stock wheels

within the U.S.!

These thin abrasive wheels are used to trim blanks to length. They

are typically used on the cutting end of the tool when re-grinding

and on the shank end when forming a blank.

Cut-Off Wheels

The wheels listed in this catalog are in stock and intended as a general starting point for the application indicated. These wheels are recommended for wet applications.

For dry applications or wheel configurations/grades not listed here, please contact your 3M Customer Service Representative at 1-800-736-2500.

Superabrasives

3M™ Cut-Off Wheels

3M™ Truing and Dressing Products

2-Day

Shipping

on stock wheels

within the U.S.!

109

3M™ Single-Point Dressing Tool — Premium

• A premium-quality natural

diamond tip set in a steel shank

• Non-resettable tool is more durable

than the standard-quality version

• Used on ceramic grain wheels

and other difficult-to-dress wheels

Shank D x L

Carat

Weight Type UPC Min./Case

Premium Grade Diamond Abrasive; 45° Angle

3/8" x 2"

.33 ct TR3P6 051115-20803-4 1

.50 ct TR5P6 051115-20805-8 1

7/16" x 2"

.33 ct TR3P7 051115-20804-1 1

.50 ct TR5P7 051115-20806-5 1

3M™ Single-Point Dressing Tool — Standard

• A standard-quality natural

diamond tip set in a steel shank

• Non-resettable, general

purpose dresser

Shank D x L

Carat

Weight Type UPC Min./Case

Standard Grade Diamond Abrasive; 45° Angle

3/8" x 2"

.25 ct TR2S6 051115-20793-8 1

.33 ct TR3S6 051115-20795-2 1

.50 ct TR5S6 051115-20797-6 1

.75 ct TR7S6 051115-20799-0 1

1.00 ct TR10S6 051115-20801-0 1

7/16" x 2"

.25 ct TR2S7 051115-20794-5 1

.33 ct TR3S7 051115-20796-9 1

.50 ct TR5S7 051115-20798-3 1

.75 ct TR7S7 051115-20800-3 1

1.00 ct TR10S7 051115-20802-7 1

3M™ Holding Blocks

• Used to mount

3M™ DSD Truing Tools

for truing resin bond

diamond and CBN wheels

Size Application UPC Min./Case

For 1/4" or 3/8" diameter tools Standard-Duty 051115-20821-8 1

For 3/8" or 1/2" diameter tools Heavy-Duty 051115-20822-5 1

3M™ Dressing Sticks

• The most common means of

dressing superabrasive wheels

• Made of aluminum oxide

or silicon carbide in popular sizes

Dimensions

D × T × AH Grade Prod ID UPC Min./Case

Aluminum Oxide

1/2" × 1/2" × 4" AO500 200TK 051141-54914-9 1

AO220 200TH 051115-20807-2 1

3/4" × 3/4" × 4" AO150 200TG 051115-20808-9 1

AO500 200TK 051141-54915-6 1

1" × 1" × 6" AO220 200TH 051115-20809-6 1

Silicon Carbide

1/2" × 1/2" × 3" SC320 200TI 051141-54913-2 1

3M™ DSD Truing Tools

• Made of a 3M proprietary alloy

• Excellent for truing resin bond

diamond and CBN wheels

• Will true straight ODs, angles

or sides of wheels

• Must be used without coolant

Size D × L Application UPC Min./Case

1/4" x 1-3/4" For use with 3M™ Holding Blocks 051115-20817-1 1

3/8" x 1-3/4" For use with 3M™ Holding Blocks 051115-20818-8 1

1/2" x 2" For use with 3M™ Holding Blocks 051115-20819-5 1

5/8" x 2" For thru-feed truing and dressing

of resin bond centerless wheels 051115-20820-1 1

2-Day

Shipping

on stock wheels

within the U.S.!

2-Day

Shipping

on stock wheels

within the U.S.!

Superabrasives

3M™ Truing and Dressing Products

110

Superabrasives

3M™ Multi-Point Dressing Tool

• Five or seven high-quality

diamonds configured in a

single layer; metal bond matrix

• For dressing applications requiring

the highest removal rates

Shank

D x L Type UPC Min./Case

7/16" x 1"

CL5S1 051141-20788-4 1

CL7S1 051141-20789-1 1

3M™ Impregnated Grit Dressing Tool

• Durable diamond grit in a

metal bond matrix in straight

or offset configurations

• Designed for common

dressing applications

Size Type UPC Min./Case

15° Angle

1/2" x 1/4" x 3/8"

(7/16" Shank Dia.) 2A6E7 051141-20781-5 1

3/4" x 1/4" x 5/16"

(7/16" Shank Dia.) 1A6C7 051141-20783-9 1

Straight

1/2" x 1/4" x 3/8"

(7/16" Shank Dia.) 2A6D7 051141-20782-2 1

3/4" x 1/4" x 5/16"

(7/16" Shank Dia.) 1A6A7 051141-20784-6 1

Cylindrical, Straight Round

1/4" x 3/8"

(7/16" x 1-1/2"

Shank)

1R6J7 051141-20786-0 1

3/8" x 1/2"

(7/16" x 1-1/2"

Shank)

2R6K7 051141-20787-7 1

3M™ Multi-Point Diamond Dresser

• Contains whole natural diamonds

• Used in severe dressing applications

for heavy stock removal

• For straight dressing where

single-point tools are not economical

Head

Diameter

Carat

Weight Description UPC Min./Case

Type Jr.

1/2" 3 ct Used on 7" and 8" wheels 051115-28466-3 1

Type 2 and 8

5/8" 6 ct

Used on a #2

Cincinnati centerless,

using an 8" wheel

051115-28465-6 1

Type CC

1" 6 ct

Used on centerless,

cylindrical, and surface

grinders, using wheels

10" in diameter or larger

051115-28464-9 1

3M™ Truing and Dressing Products

Adhesives Selection Guide

Adhesives

111

Structural Adhesives:

Each adhesive has high cohesive strength to bond high strength

materials and potentially replace mechanical fasteners.

Non-Structural Adhesives

Metal to:

3M™ Scotch-Weld™ Epoxy,

Acrylic Adhesives

3M™ Scotch-Weld™

Instant Adhesives

3M™ Scotch-Weld™

Adhesives

3M™ Aerosol

Adhesives

Metal Acrylics, Epoxies CA40H 1357, 1099 (All), 1300 80, 90

EPDM Rubber — CA40H 4799 —

Rubber (except EPDM) Flexible 2-part Epoxies CA40H 1300, 847 80, 90*

Glass and Ceramics Flexible 2-part Epoxies — 1357 80, 90

Leather Flexible 2-part Epoxies — 847 80

Plastics (Polyolefins) DP8005 — — 90

Plastics (ABS, PVC, Acrylic, etc.) DP8005 CA40H 1357 77, 80, 90

Plastics (High Performance Nylon) DP460 CA40H 1099 (All) 77, 80, 90

Plastics (Flexible Vinyl) Flexible 2-part Epoxies CA40H 1099 (All) 80

Paper and Cardboard 2-part Epoxies — 10 77

Fabric, Felt, Cork and Fibrous Glass 2-part Epoxies — — 74, 77, 80, 90

Flexible Foam (Latex, Urethane) — — — 74, 90

Rigid Foam (Beadboard, Styrene) Flexible 2-part Epoxies — — —

Rigid Foam (Urethane) Flexible 2-part Epoxies CA40H 1357, 5, 10 74, 80

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Final product selection should be made only after consideration of a variety of factors and evaluations of sample bonds.

* Produces a temporary bond on these materials. (1) Adhesives must be force dried and bonded while warm. (2) For best results, preheat the substrate to a

minimum of 120°F (49°C). (3) Evaluate usage surface activator.

Non-Structural Adhesives

112

3M™ Aerosol Adhesives

Only a finger’s touch puts a job-matched formulation to work on paper, plastic, cardboard, foam, metal and more. 3M Aerosol

Adhesives contain no methylene chloride, chlorofluorocarbons (CFCs), or 1,1,1-trichloroethane (methyl chloroform) and are

California compliant.

Product Number/Description

Spray

Width

Bonding

Range

Surfaces

One/Both

(PSI)

Shear1

Initial/

Ultimate

Relative Adhesion

Coverage Sq.

Ft/Container4

(Typical) Color Size

UPC

(021200-)

Qty./

Case

Peel

Strength

(PIW)2

Temper-

ature

Resitant3

3M™ FoamFast 74 Spray Adhesive

• Fast tack with foam-tearing strength

• Soft, non-dimpling glue line

• General upholstery foam bonding

• Knife edge bonding, boxing,

edge turning

• Bonds flexible urethane or latex foam

together or to wood, metal and plastic

1" – 4"

variable

N/R/

15 min. 40/205 20 120°F

(49°C) 260

Inverted

Orange

24 fl. oz.

can 07277-6 12

Clear 24 fl. oz.

can 50045-9 12

Original

Formula

Orange

24 fl. oz.

can 96316-2* 12

3M™ Super 77™ Multipurpose Spray Adhesive

• Fast, aggressive tack for bonding

many lightweight materials

• High coverage

• Low soak-in for long lasting bonds

• Bonds gaskets in water pumps, and

attaches insulation to sheet metal

1-1/2"–

4" fan

15 min./

30 min. 25/160 15 110°F

(43°C) 220

Original

Formula

24 fl. oz.

can 96315-5* 12

Low Mist 24 fl. oz.

can 21210-9 12

3M™ Rubber & Vinyl 80 Spray Adhesive

• Neoprene-based contact adhesive

with plasticizer resistance

• Adheres stainless steel panels,

stiffeners, metal kick plates, leather

and most supported vinyl, plastics,

laminates, wood products and

rubbers (except EPDM)

3" N/R/

1 hr. 50/400 35 200°F

(93°C) 75/304 — 24 fl. oz.

can 82618-4 6

3M™ Hi-Strength 90 Spray Adhesive

• High contact bond for

decorative laminate

• Adheres to polyethylene

and polypropylene to wood, metal

and more

• One minute dry time

1" – 4"

variable

N/R/

15 min. 45/230 25 160°F

(71°C) 100 — 24 fl. oz.

can 07278-3 12

1 ATD T.M. C-700: 1/8" birch veneer bonded to 1/8" birch veneer

2 ATD T.M. C-449

3 ATD T.M. C-483: 500 g load for 1 hr. at noted temperature

4 Plastic laminate bonding @ 3-5 g/sq. ft. coverage

5 Coverage based on container sizes 24 fluid ounce or 16 fluid ounce size cans

N/R = Not Recommended

* NOT FOR SALE IN CALIFORNIA

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Adhesives

Non-Structural Adhesives

113

3M™ Scotch-Weld™ Plastic Adhesives, Rubber and Gasket Adhesives and Industrial Adhesive

The Scotch-Weld™ Adhesive is a tool designed adhesive designed to provide innovative answers to a wide variety

of non-structural bonding problems.

Product Number/Description

Solids

Weight

(Approx.)

Flash

Point

(Closed

Cup)

Consis-

tency

Color

Dry

Film

Appli-

cation

Method

Bonding

Range

Overlap Shear

Strength (PSI)

Peel

Strength

(PSI)

Size

UPC

(021200-)

Qty./

Case

75°F

(24°C)

180°F

(82°C)

75°F

(24°C)

3M™ Scotch-Weld™ Nitrile High Performance Plastic Adhesive 1099

• Fast drying and heat curable

• Resists weathering, water, oil, plasticizer migration, aliphatic fuels

• Meets MIL-A-13883B, Type 1 and MMM-A-189C, Class 2

• A very strong plastic adhesive

• Bonds most plastic and vinyl

32% 0°F

(-18°C)

Medium

Liquid

Light

Tan

Brush,

Flow

Up to

40 min. 13061,2 6431,2 313 5 oz.

tube 19808-3 36

3M™ Scotch-Weld™ Nitrile High Performance Plastic Adhesive 1099L

• Lower viscosity

• Sprayable version of 1099 Adhesive

24% 0°F

(-18°C)

Thin

Liquid Tan Spray,

Brush

Up to

20 min. 13061,2 6431,2 313 5 gal.

pail 22578-9 1

3M™ Scotch-Weld™ Nitrile High Performance Industrial Plastic Adhesive 4693H

• Clear, elastomeric adhesive

• Exceptional adhesion to metal and plastic

• Unique in its ability to bond hard-to-hold materials like polypropylene, polyethylene and high impact polystyrene

36% 1°F

(-17°C)

Medium

Liquid Clear Flow,

Brush

Up to

60 min. — — 223 5 oz.

tube 30088-2 36

3M™ Scotch-Weld™ Nitrile High Performance Rubber and Gasket Adhesive 847

• Quick drying and flexible with fuel and oil resistance

• Heat and solvent reactivatable

• Curable with heat

36% 0°F

(-18°C)

Medium

Liquid Brown Flow,

Brush

Up to

15 min. 2004 94 403

5 oz.

tube 19718-5 36

1 qt. 19721-5 12

3M™ Scotch-Weld™ Neoprene High Performance Rubber and Gasket Adhesive 1300

• High immediate strength

• Fast-drying and heat resistant for rubber and metal

37% -14°F

(-26°C)

Medium

Liquid Yellow Flow,

Brush

Up to

12 min. 5491 1364 523 5 oz.

tube 19868-7 36

3M™ Scotch-Weld™ Industrial Adhesive 4799

• Brushable paste consistency with low soak-in on porous surfaces

• Can bond EPDM rubber

36% -14°F

(-26°C)

Thin

Paste Black Brush,

Trowel

Up to

15 min. — — 283 5 oz.

tube 21354-0 36

1 Aluminum to aluminum @ 0.1 inches/minute

2 Bonds heat cured for 15 minutes @ 324°F (162°C), 150 PSI

3 Canvas to cold rolled steel @ 2.0 inches/minute separation rate

4 Birch plywood to birch plywood @ 0.1 inches/minute separation rate

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Adhesives

114

3M™ Scotch-Weld™ Neoprene Contact Adhesives

This line offers a wide range of choices for contact adhesives

applications. Select from bonding ranges, strengths, solids

contents and solvent formulations to meet requirements for

bonding laminate, foam and more.

Product Number/

Description

Solids

Weight

(Approx.)

Flash

Point

(Closed

Cup)

Consis-

tency

Color Dry

Film

Appli-

cation

Method

Bonding

Range

Overlap Shear

Strength (PSI)

Peel

Strength

(PSI)

Color Size

UPC

(021200-) Qty./Case

75°F

(24°C)

180°F

(82°C)

75°F

(24°C)

3M™ Scotch-Weld™ Neoprene Contact Adhesive 5

• Rapid strength buildup

• Heat and creep

resistant bond

• Bonds many high

pressure plastic

laminates to metal

and other surfaces

19% -14°F

(-26°C)

Thin

Liquid

Green,

Light Yellow Spray 30 min.

max. 4821651192

Green 5 Gal.

Pail 21232-1 1

Light

Yellow

5 Gal.

Pail 20333-6 1

3M™ Scotch-Weld™ Neoprene Contact Adhesive 10

• Similar performance

to Contact Adhesive 5

• Brushable with higher

coverage

• Bonds aluminum,

steel, rubber and

other porous and

non-porous materials

to each other or

to themselves

22% -14°F

(-26°C)

Thin

Liquid Light Yellow Brush,

Roller

30 min.

max. 4821651192Light

Yellow

Quart 20272-8 12

1 Gal. 20274-2 4

5 Gal.

Pail 20276-6 1

3M™ Scotch-Weld™ Neoprene High Performance Contact Adhesive 1357

• Rapid buildup to a

very high strength

bond for metal

• Resists heat and

continuous load stress

• Adheres well to

metal, rubber,

wood and glass

25% -14°F

(-26°C)

Thin

Liquid

Gray-green,

Light Yellow

Brush,

Spray

30 min.

max. 53611991422

Gray

Green

5 oz.

tube 19887-8 36

Pint 19890-8 12

Quart 19892-2 12

1 Gal. 19894-6 4

5 Gal.

Pail 19897-7 1

Light

Yellow

1 Gal. 22586-4 4

5 Gal.

Pail 64963-9 1

1 Birch plywood to birch plywood @ 0.1 inches/minute separation rate

2 Canvas to cold rolled steel @ 2.0 inches/minute separation rate

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Adhesives

Non-Structural Adhesives

3M™ Sealants

Help keep air, dirt, fuel, cold, heat or other elements in or

out, you’ll find formulations from acrylic to polyurethane.

Product Number/Description

Solids

Weight

(Approx.)

Flash Point

(Closed Cup)

Consis-

tency

Color

(Dry)

Appli-

cation

Method

Cure or Dry

Time

Service

Temperature Range Size

UPC

(02100-)

Qty./

Case

3M™ Polyurethane Sealant 540

• Polyurethane

• One-component

• Moisture cures rapidly to flexible seal/bond for many plastics, metal, wood and more

• 250 psi tensile strength

90% 136°F

(58°C) Mastic Gray

Hand or

Pressure

Caulk

24 hours

(3/16" dia.

bead)

-40° to 194°F

(-40° to 90°C)

10.5 oz.

cartridge 41594-4 12

400ml

sausage

pack

96277-6 12

3M™ Polyurethane Adhesive Sealant 560

• Similar to 540 but with 580 psi tensile strength

• May replace mechanical fasteners

• Polyurethane

• One-component

• Moisture cures rapidly to flexible seal/bond for many plastics, metal, wood and more

90% 136°F

(58°C) Mastic Gray

Hand or

Pressure

Caulk

24 hours

(3/16" dia.

bead)

-40° to 194°F

(-40° to 90°C)

1/10

gallon

cartridge

41596-8 12

3M™ Scotch-Seal™ Tamper Proof Sealant 1252

• Fire retardant seal

• Resists oil, gasoline, water, jet fuel and fungus

• Will not corrode metal

• Tack-free in 20 seconds

70% 20°F

(-7°C)

Thin

Paste White Pressure-

Flow Gun

24 hours

(1/8" dia.

bead)

-20° to 250°F

(-29° to 121°C) 5 oz. tube 20193-6 36

3M™ Scotch-Seal™ Metal Sealant 2084

• Seals metal to glass in windows and doors

• Resists weather, water, oil and gasoline

46% 0°F

(-18°C)

Heavy

Liquid

Alumi-

num

Brush or

Flow

24 hours

(1/8" dia.

bead)

-30° to 250°F

(-34° to 121°C) 5 oz. tube 20227-8 36

115

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Adhesives

Non-Structural Adhesives

116

3M™ Scotch-Weld™ Epoxy and Acrylic Adhesives

Used as an alternative for mechanical or fusion fastening due to its greater design latitude, cleaner lines, lighter weight, greater

durability, less machining and often less cost.

Product Number/Color1/Description

Mix Ratio

(Vol) B:A

Approx.2

Viscosity 75°F

(24°C) (CPS)

Approx.3

Worklife at

75°F (24°C)

Ave. T-Peel4

at 75°F

(24°C) (PIW)

Overlap Shear Strength5 (PSI)

Size

UPC

(021200-)

Qty./

Case

-67°F

(-55°C)

75°F

(24°C)

180°F

(82°C)

3M™ Scotch-Weld™ Epoxy Adhesive DP100 Clear

• Fast cure rigid epoxy

• 15–20 minute handling strength

• Transparent when cured

1:1 13,000 4 min. 2 900 1500 300 1.7 fl. oz 22648-9 12

3M™ Scotch-Weld™ Epoxy Adhesive DP100 Plus

• Higher peel and shear strength version of 178-100

1:1 8,500 4 min. 10 3000 3500 200 1.7 fl. oz. 87195-5 12

3M™ Scotch-Weld™ Epoxy Adhesive DP420 Off-White

• Medium worklife, toughened epoxy

• 1–2 hours handling strength

• Tough, durable structural bonds

• Very high performance, two-part epoxy adhesive

• Great for bonding metal, plastic and wood

2:1 30,000 15 min. 50 4500 4500 1260 1.2 fl .oz. 82236-0 12

3M™ Scotch-Weld™ Epoxy Adhesive 2216 B/A Gray

• Long worklife flexible epoxy

• 8–12 hrs. handling strength

• Bonds plastic, metal and other dissimilar materials

2:3 80,000 90 min. 25 2000 2500 400 Quart Kit 20356-5 6

3M™ Scotch-Weld™ Epoxy DP460 Off-White

• Long worklife toughened epoxy

• 2–4 hours handling strength

• Very high performance epoxy adhesive

• Great for bonding a wide variety of materials with outstanding reliability and durability

2:1 30,000 60 min. 60 4500 4500 700 1.25 fl. oz. 82225-4 12

1 Color is mixed if two-part product

2 Brookfield viscometer viscosity values are typical values for the mixed product

3 The time during which an adhesive will adequately wet-out on a substrate

4 180° peel tested on .030" aluminum per ASTM D 1876-61T

5 Tested per ASTM D 1002-64

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Adhesives

Structural Adhesives

117

Product Number/Color1/Description

Mix Ratio

(Vol) B:A

Approx.2

Viscosity 75°F

(24°C) (CPS)

Approx.3

Worklife at

75°F (24°C)

Ave. T-Peel4

at 75°F

(24°C) (PIW)

Overlap Shear Strength5 (PSI)

Size

UPC

(021200-)

Qty./

Case

-67°F

(-55°C)

75°F

(24°C)

180°F

(82°C)

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810

• Acrylic bonds many metals and plastics without surface prep

• Fast strength buildup

• Fully cured in 8 hours

• Low odor

• High peel and shear strength on slightly oily steel, aluminum, glass and painted surfaces

1:1 18,000 –

30,000 8–10 min. 30 1200 3600 500 1.7 fl. oz.

49077-4

(Black) 12

31310-3

(Tan) 12

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS Clear

• Non-sag version of DP810

• 10-15 minute handling strength

1:1 90,000 –

95,000 8–10 min. 20 1200 4000 500 1.7 fl. oz. 49082-8 12

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005

• 2-part acrylic adhesive bonds to polyethylene and polypropylene with no surface preparation

• Tough bond strength to resist vibration and impact

• Bonds most difficult-to-bond LSE (low surface energy) plastics

10:1 27,500 2.5–3 min. 16 — 2000 300 35mL

41547-0

(Translucent) 12

45167-6

(Black) 12

Product Number/Color1/Description

Mix Ratio

(Vol) B:A

Approximate

Mixed

Viscosity at

72°F (22°C)

Approximate

Work Life at

72°F (22°C)

Approximate

Time to Structural

Strength at 72°F

(22°C)

Overlap Shear to

Aluminum (PSI) Floating

Roller Peel to

Aluminum at

72°F (22°C) Size

UPC

(051115-)

Qty./

Case

72°F

(22°C)

180°F

(82°C)

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8810NS Green

• 10 minute work life

• Low odor

• Fast rate of strength build up

10:1 80,000 10 min. 20 min. 3,600 800 30 piw

45mL 68960-4 12

490mL 68962-8 6

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8805NS Green

• 5 minute work life

• Low odor

• Fast rate of strength build-up

10:1 80,000 5 min. 10 min. 3,600 900 30 piw

45mL 68958-1 12

490mL 68959-8 6

3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS Green

• 5 minute work life

• High impact resistance

• Minimal surface prep

10:1 70,000 5 min. 15 min. 4,100 900 50 piw

45mL 68963-5 12

490mL 68964-2 6

1 Color is mixed if two-part product

2 Brookfield viscometer viscosity values are typical values for the mixed product

3 The time during which an adhesive will adequately wet-out on a substrate

4 180° peel tested on .030" aluminum per ASTM D 1876-61T

5 Tested per ASTM D 1002-64

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Adhesives

Structural Adhesives

118

Adhesives

Product Number/

Description Base

Time1 to

Handling

Strength (sec.)

Viscosity

(CPS)

Ave. T-Peel2

at 75°F

(24°C) (PIW)

Overlap Shear Strength3 at 75°F (24°C) (PSI)

Size

UPC

(021200-)

Qty./

CaseSteel

Alumi-

num

Nitrile

Rubber

Neoprene

Rubber APS

Rigid

PVC

3M™ Scotch-Weld™ Instant Adhesive CA40H

• Better void filling capabilities

• Good adhesion to aluminum, EPDM, rubber and flexible vinyl

• Good resistance to soap solutions and isopropyl alcohol

Ethyl 5–40 400–600 1–2 1500 1500 35* 55* 900* 1000* 1 oz. 21073-0 12

1 The time it takes assembled parts to reach a strength where further handling and processing can take place. Times will depend on surface to be bonded, temperature and humidity.

2 Tested per ASTM D1876-61T

3 Tested per ASTM D1002-64

* Substrate Failure

Product Number/

Description Typical Use Color

Typical

Viscosity

(CPS)

Temp. Range

(°F)

Time to

Handling

(sec.)

Full

Cure

(hrs.) Bottle Size UPC

Qty./

Case

3M™ Scotch-Weld™ Metal Instant Adhesive MC100

• Optimum performance and high strength bonds on metal to metal

• Bond galvanized, anodized, and other difficult-to-bond metals

• Two standard viscosities

• Markets/Application Ideas: Costume jewelry, treated metals, plated metals and metal working

Low viscosity metal bonder Clear 80–120 -65° to 180° 5–20 24

1 oz. 051111-91663-6 10

1 lb. 048011-62634-5 1

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Instant Adhesives

Structural Adhesives

3M™ EPX™ Applicators and Accessories

Mixing nozzle will perform to your requirements. With consistent air pressure for

easy uniform application, the Duo-Pak cartridge will give you the flow rate needed.

Fast, convenient way to simultaneously meter, mix and apply two-part adhesives

and potting compounds. System features handy Duo-Pak Adhesive Cartridges that

snap quickly into the durable, lightweight EPX applicator. A slight squeeze on the

trigger advances the plunger into the cartridge. Accurate measurement and the

mixing nozzle provides thorough mixing and precise placement of material. Ideal

system for assembly, maintenance and in-field service.

Product Number/Description Size UPC Qty./Case

3M™ EPX™ Metal Applicator #9470 with 2:1 Plunger 50mL 021200-21789-0 10

3M™ EPX™ 50mL Pneumatic Applicator with 2:1 Plunger 50mL 021200-83528-5 1

3M™ EPX™ Plus II Applicator with 2:1 and 1:1 Plunger (manual) 50mL 021200-50004-6 10

3M™ EPX™ Plus II Square Gold Mixing Nozzle 127mm 021200-97331-4 36

3M™ EPX™ Mixing Nozzle #9742 for 50ml applicator 50mL 021200-21791-3 72

3M™ EPX™ 2:1 Plunger Assembly for 50ml applicator — 021200-82314-5 10

119

Description

Product

Number Typical Use Color

Typical

Viscosity

(CPS)

Temp.

Range

(°F)

Time to

Handling

(sec.)

Full

Cure

(hrs.)

Bottle

Size UPC

Qty./

Case

3M™ Scotch-Weld™ Threadlockers

• Prevent vibration loosening

• Seal against leakage and corrosion

• Replaces wide variety of traditional and sometimes ineffective vibration proofing methods, reducing cost and increasing performance

TL22

Screwlock—Low removal

torque for small fasteners

less than 1/4" (6mm)

(Hand tool for removal)

Purple 1,200 -65° to

300° <20 24

1mL 051115-31541-1 100

10mL 048011-62601-7 10

250mL 048011-62603-1 2

50mL 048011-62602-4 10

TL42

Nutlock—Medium strength,

general purpose

(Hand tool for removal)

Blue 1,200 -65° to

300° <20 24

1mL 048011-62604-8 10

10mL 048011-62605-5 10

1L 051115-25124-5 1

250mL 048011-62607-9 2

50mL 048011-62606-2 10

TL72

High temperature studlock

with gap filling for larger

diameter coarse threaded parts

(Heat and hand tool for removal)

Red 7,000 -65° to

300° <20 24

1mL 051115-25133-7 10

10mL 051115-25136-8 1

250mL 051115-25135-1 2

50mL 051115-25137-5 10

TL90

Penetrating adhesive for

pre-assembled fastener and

porosity sealing of welds

(Heat and hand tool for removal)

Green 20 -65° to

300° <20 24

1mL 048011-62615-4 10

10mL 051115-25150-4 1

250mL 048011-62617-8 2

50mL 048011-62616-1 10

3M™ Scotch-Weld™ Retaining Compounds

• Used in the assembly of coaxial components such as bearings, gears, shafts, bushes, pulleys, cylinder liners and rotors

• Increases load bearing characteristics of cylindrical joints, reducing assembly stresses, assembly costs and preventing fretting and corrosion

RT09

General Purpose —

For tight tolernaces and

press fit augmentation

Green 125 -65° to

300° 10–30 24

10mL 048011-62661-1 10

250mL 048011-62663-5 2

50mL 048011-62662-8 10

RT35* Slip Fit/Slow Cure—

High strength for slip fits Green 2,000 -65° to

300° 10–60 24

10mL 048011-62667-3 10

250mL 048011-62669-7 2

50mL 048011-62668-0 10

RT40*

Pressure Fit/Hi Temperature—

Secures all types and sizes

of bearings, shafts and

cylindrical parts

Green 600 -65° to

400° 10–15 24

250mL 051115-25735-3 2

50mL 051115-25734-6 10

* Made to order.

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Adhesives

Anaerobic Adhesives

120

Tapes

Anaerobic Adhesives

3M™ Temporary Surface Protection Tapes

Description

Product

Number Typical Use Color

Typical

Viscosity

(CPS)

Temp.

Range (°F)

Cured Speed

Unprimed

(Primed)

Cured

State Size

UPC

(048011-)

Qty./

Case

3M™ Scotch-Weld™ Gasket Makers

• Creates formed-in-place gaskets on flanges and housing to eliminate the need for large inventories of pre-cut gaskets

• Will not relax or shrink

• Exceptional pressure and solvent resistance

GM15 General purpose; flexible

to withstand vibration Purple Paste -65° to

300°

1–12 hrs.

(15 min.–2 hrs.) Flexible

250mL

tube 62656-7 2

300mL

cart. 62657-4 10

50mL

tube 62655-0 10

GM18

Instant low pressure seal

without a primer on mating

aluminum flanges

Red Paste -65° to

300°

4–24 hrs.

(30 min.–4 hrs.) Flexible

300gm

cart. 62660-4 10

50mL

tube 62658-1 10

Product Number/

Description Typical Use Color Size UPC (048011-)

Qty./

Case

3M™ Scotch-Weld™ Anaerobic Activator AC649

• Acetone-based primer for inactive or very cold surfaces

• 30 day part life for pre-application Green

2 fl. oz. bottle 62708-3 10

8 fl. oz. bottle 62709-0 4

1 gal. can 62707-6 1

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Selection Guide for 800 Series Tapes

Low Tack Medium Tack Medium High Tack Specialty

General Purpose, 1.5 mil film 15CV804 15CV825 15CV826

Industrial Polyethylene, 2 mil film 21804 21825 21826

Industrial Polyethylene, 3 mil film 31804 31825 31826 31829

High Performance, 2 mil film 2A804 2A825 2A826 2A829

Industrial Polyethylene, 4 mil film 41825 41826

High Performance, 2.5 mil film 25A825 25A826 25A829

Industrial Polyethylene, 5 mil film 51825 51826

High Performance, 5 mil film 5A829

Increasing Film Performance

Increasing Tack Level

121

Tapes

3M™ Temporary Surface Protection Tapes

21825 High Performance 2A829 High Performance

For punching, shearing or drilling processes For porous or other unique surfaces

2A825 High Performance

For lightly textured or semi-gloss surfaces and/or bending,

embossing, roll forming or shallow draw processes

• Anodized aluminum

• Marble

• Painted metal, high pressure

laminate, plastic

• Stainless steel 2B, #3, #4

2A804 High Performance

For very smooth, high gloss surfaces

• Glass

• High pressure laminates

• LCD screens

Need less

stretch &

abrasion

resistance?

Need more

abrasion

resistance?

Need more

tack?

Need value

option?

Start with

2A804

HIGH PERFORMANCE

15CV804

GENERAL PURPOSE

21804

INDUSTRIAL

POLYETHYLENE

25A825

HIGH PERFORMANCE

2A825

HIGH PERFORMANCE

Need less

abrasion

resistance?

Need less

tack?

Need more

abrasion

resistance?

Need value

option?

Start with

2A829

HIGH PERFORMANCE

15CV826

GENERAL PURPOSE

31829

INDUSTRIAL

POLYETHYLENE

2A826

HIGH PERFORMANCE

25A829

HIGH PERFORMANCE

Need less

tack?

Need more

abrasion

resistance?

Need more

tack?

Need value

option?

Start with

21825

HIGH PERFORMANCE

15CV825

GENERAL PURPOSE

21804

INDUSTRIAL

POLYETHYLENE

31825

INDUSTRIAL

POLYETHYLENE

21826

INDUSTRIAL

POLYETHYLENE

• Painted metal, polycarbonate

or plastic

• Stainless steel #7 and #8

15CV825

GENERAL PURPOSE Need less

stretch &

abrasion

resistance?

Need more

abrasion

resistance?

Need more

tack?

Need less

tack?

Start with

2A825

HIGH PERFORMANCE

2A804

HIGH

PERFORMANCE

21825

INDUSTRIAL

POLYETHYLENE

25A825

HIGH PERFORMANCE

2A826

HIGH PERFORMANCE

Need value

option?

122

3M™ VHB™ Tapes

3M™ VHB™ Tapes are high-strength bonding tapes and a proven alternative to screws, rivets, welds

and other mechanical fasteners. Unlike screws or rivets — which join materials at a single point —

high-strength bonding tape permanently adheres one substrate to another while spreading the stress

load across the entire length of the joint. Once materials are joined with 3M™ VHB™ Tape a virtually

indestructible “weld” is created.

3M™ VHB™ Tape’s all-acrylic construction seals against moisture and most solvents, providing long-term

resistance to UV and temperature cycles. The tape’s unique foam acts as a shock absorber for outstanding

impact resistance. Unlike the stress points common to mechanical fasteners, 3M™ VHB™ Tapes distribute the

stress. You can use thinner, light-weight materials with less material fatigue.

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

3M™ VHB™ Tapes Welds Rivets

Tapes

Description

Product

Number Typical Use Color Thickness

Temperature Resistance

Size

UPC

(021200-)

Qty./

CaseShort Long

3M™ VHB™ Tapes

4941

• Conformable and plasticizer resistant

• Good adhesion to metals, plastics

and plasticized vinyls

Gray 45 mils 300°F

(149°C)

200°F

(93°C)

1/2" x 36 yds. 64886-1 18

3/4" x 36 yds. 64887-8 12

1" x 36 yds. 64888-5 9

4611

• Bonds to bare metal and holds

parts together during the washes

and high temperature bake of a

powder paint cycle

• Used for hat channel and stiffeners

Dark

Gray 45 mils 450°F

(232°C)

300°F

(149°C)

1/2" x 36 yds. 56375-1 18

3/4" x 36 yds. 56002-6 12

1" x 36 yds. 56146-7 9

5952

• Bonds to most liquid and powder

painted surfaces, and ABS blends,

without the need to prime the

surface first

Dark

Gray 45 mils 300°F

(149°C)

200°F

(93°C)

1/2” x 36 yds. 59967-5 18

1” x 36 yds. 56229-7 9

4945

• Plasticizer resistant

• High strength firm core

• Bonds to most painted substrates

• Good adhesion to substrates

containing plasticizers

White 45 mils 300°F

(149°C)

200°F

(93°C)

1/2" x 36 yds. 16961-8 18

3/4" x 36 yds. 16954-0 12

1" x 36 yds. 16955-7 9

4950 • Bonds to most metals and high

surface energy substrates White 45 mils 300°F

(149°C)

200°F

(93°C)

1/2" x 36 yds. 18090-3 18

3/4" x 36 yds. 18091-0 12

1" x 36 yds. 18092-7 9

To evaluate how 3M VHB Tapes can be used in your applications, contact your 3M Sales Specialist or call 1-866-279-1288

High-Strength Bonding Tapes

123

Tapes

Masking Made Simple

Introducing 3M™ Industrial Masking Tapes. Five tapes, built on increasing levels

of performance and a common goal of helping you finish jobs worth finishing.

The basic

tape for

basic jobs

The tough

tape for

everyday jobs

The dependable

choice for

industrial

performance

The industrial

strength

GREEN colored

performance

The highest

degree of

industrial

performance

Product Number/Description Backing/Adhesive

Total

Thickness

mils (mm)

Temperature

Range °F (°C) Size

UPC

(051115-)

Qty./

Case

3M™ Value Masking Tape 101+

• Indoor use

• Light-duty applications

• Ideal for marking, temporary holding,

wrapping, and sealing

Crepe Paper/

Rubber

5.1

(0.13)

Up to 150°F

(66°C)*

18mm x 55m 68707-5 48

24mm x 55m 68708-2 36

36mm x 55m 68709-9 24

48mm x 55m 68710-5 24

72mm x 55m 67811-2 12

3M™ General Use Masking Tape 201+

• Light-to-medium duty

• Smooth and conformable

• Sticks with confidence to a wide variety

of surfaces

• Easy to handle, apply and remove in

one piece

• Ideal for bundling, labeling and identifying

Crepe Paper/

Rubber

4.4

(0.11)

Up to 200°F

(93°C)*

18mm x 55m 64739-0 48

24mm x 55m 64740-6 36

36mm x 55m 64741-3 24

48mm x 55m 64742-0 24

72mm x 55m 64743-7 12

3M™ Performance Yellow Masking Tape 301+

• Good comformability to irregular surfaces

• Resists paint bleed-through and offers great

paint lines

• Yellow backing ensures good visibility

• Ideal for industrial paint masking, bundling,

holding, marking, color coding and sealing

Smooth Crepe

Paper/Rubber

6.3

(0.16)

Up to 225°F

(107°C)*

18mm x 55m 64750-5 48

24mm x 55m 64751-2 36

36mm x 55m 64752-9 24

48mm x 55m 64753-6 24

72mm x 55m 64754-3 12

3M™ High Performance Green Masking Tape 401+

• Superior adhesion to metal, rubber, glass

and plastic, while removing cleanly in one

piece with no adhesive residue

• High conformable to many surfaces

• Resists paint bleed-through and creates

super-sharp paint lines

• Green backing improves visibility and

accuracy during paint masking

• Ideal for high performance industrial painting,

including two-tone color applications

Smooth Crepe

Paper Treated with

a Heat Resistant

Saturant/

Natural Synthetic

Rubber Blend

6.7

(0.17)

Up to 250°F

(121°C)*

18mm x 55m 64760-4 48

24mm x 55m 64761-1 24

36mm x 55m 64762-8 16

48mm x 55m 64763-5 12

72mm x 55m 64764-2 8

3M™ Specialty High Temperature Masking Tape 501+

• Exceptionally conformable to

irregular surfaces

• Superior adhesion to metal, rubber,

glass and plastic

• Removes cleanly in one piece with

no residue

• Extra-strong backing resists bleed-through

from most industrial paints

• Creates super sharp paint lines

Smooth Crepe

Paper Treated with

a Heat Resistant

Saturant/Rubber

7.3

(0.185)

Up to 300°F

(149°C)*

18mm x 55m 64773-4 48

24mm x 55m 64774-1 36

36mm x 55m 64775-8 24

48mm x 55m 64776-5 24

72mm x 55m 64777-2 12

** Up to 30 minutes

124 Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Tapes

Masking Tapes

125

Product Number/Description Size

UPC

(051131-) Qty./Case

3M™ Scotchblok™ Masking Paper Gold

• Protects against dust contamination from its own paper fibers

• Holds up well under wet sanding conditions

• Excellent conformability

• No solvent penetration

• Bake cycles up to 225°F (107°C) for 30 minutes

• Gold

18" x 750' 06718-9 2

3M™ Masking Paper White

• For utility applications

• Acceptable conformability

• 24 lbs. treated paper

• Bake cycles up to 400°F (204°C) for 30 minutes

• White

18" x 750' 06539-0 2

Product Number/Description Size

UPC

(051131-) Qty./Case

3M™ Welding and Spark Deflection Paper

• Flame retardant

• Repositionable adhesive on one side

• Formulated to protect vertical surfaces, glass and

paint from welding spatter and grinding sparks

• Easy to use roll form

24" x 150' 05916-0 2

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Tapes

Painting Masking Paper

Welding Masking Paper

126

High-Strength Tapes — Bundling and Reinforcing Solutions

Scotch® Filament Tapes

3M has developed a wide range of high strength tapes, resistant to abrasion, moisture and scuffing,

for the bundling and reinforcing challenges faced in the industrial marketplace. Applications for

these high performance products can vary dramatically — from tabbing the end lap of metal

coils to stabilizing pallets to reinforcing large bulk containers or just a single carton.

These tapes balance tensile strength and adhesive holding power, even under extreme conditions,

providing secure, cost-effective solutions for a variety of strapping, bundling and reinforcing applications.

Scotch® Filament Tapes Selection Guide

Application 880MSR 890MSR 898MSR 8919MSR 880 894 8919

Coil Tabbing llll l

Pipe Bundling l l l l

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Tapes

Description/ Product Number Color Backing Reinforcement Adhesive

Elongation

at Break

Tensile

Strength

(lbs./in.) Size UPC (051125-)

Qty./

Case

Scotch® High Strength Filament Tape 890MSR

• Ideal for heavy gauge metals, metal bundling, coil tabbing, high strength reinforcing, lift flap closure, and heavy duty strapping

• Specially formulated adhesive to provide optimum oily metal adhesion

• High adhesion and long term holding power for a variety of demanding metal working applications

Clear Polyester Film Glass Yarn Modified Synthetic

Rubber (MSR) 3% 600

18mm x 55m 74058-6 48

24mm x 55m 74059-3 36

48mm x 55m 74061-6 24

UV-

Resistant

Black

Polyester Film Glass Yarn Modified Synthetic

Rubber (MSR) 3% 600

18mm x 55m 74063-0 48

24mm x 55m 74064-7 36

Scotch® Filament Tape 890MSR

• Ideal for heavy gauge metals, metal bundling, coil tabbing, high strength reinforcing, lift flap closure, and heavy duty strapping

• Specially formulated adhesive to provide optimum oily metal adhesion

• High adhesion and long term holding power for a variety of demanding metal working applications

Clear Polyester Film Glass Yarn Modified Synthetic

Rubber (MSR) 3% 600 24mm x 55m 74943-5 36

48mm x 55m 74942-8 24

Scotch® Filament Tape 880MSR

• Ideal for metal bundling, coil tabbing, high strength reinforcing, lift flap closure, and heavy duty strapping

• Specially formulated adhesive to provide optimum oily metal adhesion

• Best cut resistance

Clear Polyester Film Glass Yarn Modified Synthetic

Rubber (MSR) 19% 270

18mm x 55m 74065-4 48

24mm x 55m 74066-1 36

48mm x 55m 74068-5 24

* 2 rolls per pack, 18 packs per case

Filament Tapes

127

Description/ Product Number Color Backing Reinforcement Adhesive

Elongation

at Break

Tensile

Strength

(lbs./in.) Size UPC (021200-)

Qty./

Case

Scotch® Filament Tape 8919

• Ideal for securing hinged appliance doors or parts during shipping and the end lap of steel or aluminum coils

• Specially formulated adhesive to provide clean removal and stain resistance on certain substrates

Clear Scotchpar™ Film Glass Yarn Natural Rubber

Resin 3% 380

18mm x 55m 39875-9 48

24mm x 55m 39876-6 36

48mm x 55m 39878-0 24

Scotch® Filament Tape 880

• High impact and cut resistance

• Long term holding power to fiberboard, non-oily metals and printed and painted surfaces

Clear Scotchpro™

Film Polyester yarn Synthetic Rubber

Resin 19% 270 12mm x 55m 39842-1 72

18mm x 55m 39844-5 48

Scotch® Filament Tape 894

• General purpose packaging tape

• When used in bundling, reinforcing or coil tabbing applications with high temperatures

and/or oily surfaces, tests should be conducted to determine the tape’s suitability

Black Scotchpro™

Film Glass yarn Synthetic Rubber

Resin 4.5% 300 18mm x 55m 88131-2 48

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Description/ Product Number Color Backing Reinforcement Adhesive

Elongation

at Break

Tensile

Strength

(lbs./in.) Size

UPC

(051125-)

Qty./

Case

Scotch® Filament Tape 898MSR

• Most versatile tape featuring MSR adhesive

• Specially formulated adhesive to provide optimum oily metal adhesion

• Good cut resistance

Clear Polyester Film Glass Yarn Modified Synthetic

Rubber (MSR) 3% 380 18mm x 55m 74069-2 48

48mm x 55m 74080-7 24

Scotch® Filament Tape 8919MSR

•Thicker backing for easier dispensing and handling

• Specially formulated adhesive to provide optimum oily metal adhesion

• Long term holding power for a variety of demanding metal working applications

Clear Polyester Film Glass Yarn Modified Synthetic

Rubber (MSR) 3% 380

18mm x 55m 74051-7 48

24mm x 55m 74052-4 36

48mm x 55m 74054-8 24

24mm x 55m 74939-8* 36

48mm x 55m 74940-4 24

*2 rolls per pack, 18 packs per case

Tapes

Filament Tapes

128

Specialty Tapes

Whether you need an acid-resistant tape for plating masking, a tape that will come off cleanly after high temperature powder

coating or a tape with thermal conductivity, you can find it in 3M™ Specialty Tape Solutions.

Product Number/Description Size UPC (021200-) Qty./Case

Scotch® Filament Tape Dispenser H121

• Portable, lightweight, all metal hand-held dispenser

• Use for a wide variety of carton reinforcing, bundling, and

on-the-spot box sealing and masking applications

• For Scotch® Filament Tapes up to 1” (24mm) wide on a 3” core

1" 051111-97744-6 6

Scotch® Box Sealing Tape Dispenser H123

• Lightweight, compact, hand-held dispenser

• For pressure sensitive tapes up to 72mm wide x 55m

(3" wide x 60 yds.) on 3" cores

• Sturdy metal construction for durable, long-life performance

3" 11102-0 6

Scotch® Box Sealing Tape Dispenser H128

• Durable, heavy-duty metal dispenser

• Provides a quick and easy method of applying H-seal and

center-seam closures of RSCs

• Lightweight steel construction

• Adaptable for a variety of on-the-spot applications

• Accommodates tapes up to 2" (48mm) wide on a 3" core

2" 06909-3 6

Scotch® Definite Length Dispenser M82

• Heavy-duty dispenser

• Handles multiple tape rolls simultaneously from 1/2" (12mm)

to a maximum combined width of 4" (98mm)

• Applications include definite tape lengths for box closure, holding,

appliance and electronics reinforcing, strapping, or bundling,

and lift-flap taping on Basiliod containers

4" 18959-3 1

Product Number/Description Color Backing Adhesive

Elongation

at Break

Tensile Strength

(lbs./in.) Size

UPC

(021200-)

Qty./

Case

3M™ Polyester Tapes 8901/8902

• Use as a maskant with easy removal for powder coat painting

• Polyester film retains flexibility and is abrasion, chemical and thermal resistant to help reduce failures due to cracking and backing deterioration

• Silicone adhesive for high heat resistance (up to 400°F; 204°C) to help reduce failure due to softening, oozing and adhesive transfer

8901

Blue Polyester Silicone

115% 28 1" x 72 yds. 85764-5 36

2" x 72 yds. 85765-2 24

8902 130% 53 1" x 72 yds. 85766-9 36

2" x 72 yds. 85767-6 24

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Tapes

Filament Tape Dispensers

129

Product Number/Description Color Backing Adhesive

Elongation

at Break

Tensile Strength

(lbs./in.) Size

UPC

(021200-)

Qty./

Case

3M™ General Purpose Polyester Tape 8951/8952

• Designed to provide clean removal during hi temperature/hi pressure masking operations

• Polyester film retains flexibility and thermal resistance to help reduce cracking

• Abrasion, chemical and thermal resistance helps reduce backing deterioration

• High heat resistant (up to 425°F; 218°C) silicone adhesive helps reduce failure due to softening, oozing and adhesive transfer

8951

Blue Polyester Silicone

100% 30 1" x 72 yds. 48225-0 36

2" x 72 yds. 48227-4 24

8952 110% 55 1" x 72 yds. 48230-4 36

2" x 72 yds. 48232-8 24

3M™ Polyester Tape 8992

• Silicone adhesive has high temperature properties to perform powder-coat masking, flash breaker and bag seeding applications

• Polyester film is solvent, heat, abrasion and shrink resistant

• Green color makes tape placement obvious for both application and removal

• Thin backing leaves a sharp paint line

8992 Dark

Green Polyester Silicone 83% 48 1" x 72 yds. 25736-0* 9

2" x 72 yds. 25759-9* 6

3M™ Glass Cloth Tape 361

• For extreme temperatures

• 5.4 mil backing thickness

• Can withstand intermittent temperatures up to 550°F (288°C) or higher, depending upon the type and duration of the heat source

361 White Glass Cloth Silicone 10% 182 1" x 60 yds. 03017-8 36

2" x 60 yds. 04275-1 24

3M™ Electroplating Tape 470

• Conformable with excellent resistance to most chemicals used in typical electroplating operations

• Resists most common solvents—care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacquer thinners,

degreasers, paint strippers, etc. which may cause the backing to swell or curl

• Can be qualified to meet Federal Specification HH-T-0025 (GSA-FSS)

470 Tan Pigmented

Vinyl Plastic Rubber 180% 20 1" x 36 yds. 85616-7 36

2" x 36 yds. 85617-4 24

3M™ Aluminum Foil Tape 425

• Good candidate as a maskant in electroplating of aluminum because it will not contaminate the bath

• Adhesion to steel: 47 oz./in. width

• An acrylic adhesive, combined with a durable aluminum backing, offers ideal properties for long serviceable life indoors and out

• Aluminum backing provides excellent reflection of both heat and light

425 Shiny

Silver

Dead Soft

Aluminum Acrylic 8% 30 1" x 60 yds. 60572-7 36

2" x 60 yds. 60574-1 24

3M™ Lead Foil Tape 420/421

• Very good conformability and can be die-cut into specific shapes

• Adhesion to steel: 45 oz./in. width

• Good thermal properties and will perform over a wide variety of temperature conditions (-60° to 225°F; -54° to 106°C); use indoors or out

• Electrically and thermally conductive

420

Dark Silver Lead Foil Rubber

(Green)

12% 20 1" x 36 yds. 04923-1 9

2" x 36 yds. 03081-9 6

421 14% 15 1" x 36 yds. 04917-0 9

2" x 36 yds. 03195-3 6

*Order using prefix 051115

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Tapes

Specialty Tapes

130

Scotch® Box Sealing Tapes

With Scotch® Box Sealing Tapes, you have the flexibility to seal boxes in

a wide range of environments for durable and secure closure in packing

stations. The tape is tough enough to resist score-line breaking and

center-seam splitting, even when subject to rough handling.

Features strong backing with either pressure-sensitive hot melt synthetic

rubber resin adhesive or acrylic adhesives for reliable closures. A variety of

hand-held dispensers allow for quick and easy application.

Product Number/Description Backing/Adhesive

Total

Thickness

mils (mm) Color Size

UPC

(021200-)

Qty./

Case

Scotch® Box Sealing Tape 355

• Used for demanding packaging applications

• Considered water resistant as per ASTM D5570

• Adheres instantly to most surfaces, including

cartons containing high levels of recycled content

• High edge tear and split resistance

• Superior performance ensures reliable closures

Polyester Film/

Hot Melt

Rubber Resin

3.43 (.09)

Clear

48mm x 50mm 72330-8 36

48mm x 914mm 72300-1 4

72mm x 50mm 72331-5 24

72mm x 914mm 72333-9 2

Tan 48mm x 50mm 06651-9* 36

72mm x 50mm 72327-8 24

Scotch® Box Sealing Tape 371

• Seals single wall corrugated cartons

or bundles a group reliably

• Polypropylene backing for tear resistance

• Pressure-sensitive rubber adhesive offers quick,

moisture proof seal

• A good, tight, general purpose seal

Polypropylene/

Synthetic Rubber 1.9 (.048)

Clear

48mm x 50m 13679-5 36

72mm x 50m 19279-1 24

48mm x 100m 15873-5 36

48mm x 914mm 13681-8 6

48mm x 1500mm 61823-9 6

72mm x 100m 19280-7 24

72mm x 914mm 18198-6 4

72mm x 1500mm 62455-1 4

Tan

48mm x 50m 14105-8 36

72mm x 50m 18197-9 24

48mm x 100m 15872-8 36

48mm x 914mm 14107-2 6

72mm x 100m 61525-2 24

Scotch® Box Sealing Tape 373

• High performance, ideal for shipping heavy

packages and double walled boxes

• Sturdy polypropylene backing with synthetic rubber

adhesive resists abrasions, moisture and scuffing

for lasting hold

• 1.6 mil backing and 2.5 mil total thickness for

heavy-duty packaging applications

• Conformable backing flexes under stress

Polypropylene/

Synthetic Rubber 2.5 (.064)

Clear

48mm x 50m 72368-1 36

48mm x 914mm 72377-3 6

48mm x 1500mm 72379-7 3

72mm x 50m 69605-3 24

48mm x 100m 73079-5 36

72mm x 100m 73080-1 24

72mm x 914mm 72378-0 4

Tan

48mm x 50m 72359-9 36

72mm x 50m 72361-2 24

48mm x 100m 73081-8 36

72mm x 100m 73082-5 24

*Order using prefix 051131

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Tapes

131

Product Number/Description Backing/Adhesive

Total

Thickness

mils (mm) Color Size

UPC

(021200-)

Qty./

Case

Scotch® Box Sealing Tape 375

• High performance, ideal for shipping heavy packages

including overpacked, double or triple-walled boxes

• Sturdy polypropylene backing with synthetic rubber

adhesive resists abrasions, moisture and scuffing for

lasting hold

• 2.0 mil backing and 3.1 mil total thickness

• Conformable backing flexes under stress

Polypropylene/

Synthetic Rubber 3.1 (.079)

Clear

48mm x 50m 72406-0 36

48mm x 914mm 72408-4 6

72mm x 50m 72407-7 24

72mm x 914mm 72409-1 4

Tan 48mm x 50m 72401-5 36

72mm x 50m 72402-2 24

Scotch® Box Sealing Tape 311

• General purpose box sealing tape designed

specifically for utility type applications on light to

medium weight boxes

• Adheres instantly to a variety of surfaces, even in

colder and damper environments

• Conformable backing

• Edge tear and split resistant

• Good aging in sunlight or fluorescent lighting

Polypropylene/

Pressure

Sensitive Acrylic

2.05 (.052) Clear

48mm x 100mm 88292-0 36

48mm x 1500mm 69398-4 6

72mm x 100mm 69397-7 24

Tartan™ General Purpose Box Sealing Tape 305

• General purpose packaging tape used for

non-critical box sealing applications

• A conformable backing

• Good closure for lightweight boxes exposed

to minimal distribution hazards

Polypropylene/

Pressure

Sensitive Acrylic

1.8

(.046) Clear

48mm x 100mm 39809-4 36

48mm x 914mm 39810-0 6

Scotch® Cold Temperature Box Sealing Tape 3331

• Ideal for applications at refrigeration temperatures or

at room temperature with subsequent storage at low

temperatures

• Adheres to a wide variety of surfaces between 30°–

40°F (-1°–4°C), secured closures maintained below

32°F (0°C)

• Excellent tack at low temperatures

Polypropylene/

Pressure

Sensitive

Hot Melt

Rubber Resin

1.8

(0.045) Clear

48mm x 100mm 32173-3 36

48mm x 914mm 32174-0 6

72mm x 100mm 32175-7 24

72mm x 914mm 32176-4 4

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Product Number/Description Size UPC (021200-) Qty./Case

Scotch® Box Sealing Tape Dispenser H122

• Hand braking system lets you control the amount of tape you use

• Popular, light, plastic, contoured hand held dispenser

• Small and portable, yet allows you to dispense tape up to

2" wide on a 3" core

48mm

(2") 06925-3 6

Scotch® Low Noise Tape Dispenser H150

• Hand-held, roll-on, pistol-grip dispenser

• Designed to reduce the noise of tape unwind during application

• Sturdy, durable, and easy to load and operate

• Metal and high-impact plastic construction

• Includes “mousetrap” tape brake

48mm

(2") 39518-5 6

Scotch® Low Noise Tape Dispenser H153

• Same features as the H150 dispenser

• Metal and high-impact plastic construction

• Includes “mousetrap” tape brake

72mm

(3") 39820-9 6

Tapes

Box Sealing Tapes

Box Sealing Tape Dispensers

132

Tapes

Product Number/Description

Backing/

Adhesive

Total

Thickness

mils (mm)

Temperature

Range

°F (°C) Color Size UPC

Qty./

Case

3M™ Performance Plus Duct Tape 8979

• Class 1 — Clean Removal Duct Tape

• Removes cleanly from most opaque

surfaces, leaving behind no sticky

residue for up to six months

• Indoors or outdoors, this tape stays on

the job without deteriorating for up to

twelve months

• Water resistant and sunlight/UV resistant

Polyethylene

film over cloth

scrim/Natural

and Synthetic

Rubber

12.6

(0.33)

Up to 200°F

(93°C)

Slate

Blue

24mm x 54.8mm 048011-

53922-5 48

48mm x 54.8mm 021200-

56468-0 24

72mm x 54.8mm 021200-

56469-7 12

96mm x 54.8mm 021200-

56470-3 12

3M™ Multi-Purpose Duct Tape 3900

• Class II — Heavy Duty Duct Tape

• Polyethylene coated cloth

with rubber adhesive

• General purpose duct tape

• Good choice for general maintenance,

wrapping, sealing and protecting

Polycoated

Cloth/Rubber

7.7

(.020)

Up to 200°F

(93°C)

Silver 48mm x 54.8mm 051131-

06976-3 24

Black 48mm x 54.8mm 021200-

49833-6 24

Yellow 48mm x 54.8mm 021200-

49828-2 24

3M™ Vinyl Duct Tape 3903

• Class III — Utility Duct Tape

• Embossed vinyl film coated with

rubber adhesive

• Designed for general sealing, color

coding, masking, wrapping and bundling,

protecting and other light duty

applications where easy unwind,

easy tear and less adhesive transfer

are important

Embossed

Vinyl/Rubber

6.3

(0.16)

Up to 250°F

(121°C)

Gray 2" x 50 yds. 051131-

06984-8 24

Black 2" x 50 yds. 051131-

06995-4 24

Yellow 2" x 50 yds. 051131-

06982-4 24

* Use this prefix unless otherwise noted

Product Number/Description Size UPC (021200-) Qty./Case

Scotch® Box Sealing Tape Dispenser H180

• Hand held, portable and easy to use roll-on motion

• Features an adjustable tape brake allowing control of tension and delivery

• Dispenses tapes 2" wide and is constructed of plastic and metal

48mm

(2") 19008-7 6

Scotch® Box Sealing Tape Dispenser H183

• Recommended for center seam sealing of RSC boxes

• Metal and high-impact plastic construction for durability

and long-life performance

• Hand-held dispenser features adjustable tape break

72mm

(3") 61850-5 5

Scotch® Box Sealing Tape Dispenser H192

• Tape tension can be controlled with tape roll break

• High impact plastic construction

48mm

(2") 86512-1 6

Tartan™ Box Sealing Hand Dispenser HB933

• Seals cartons easily and secures a smooth, one-handed

roll-on motion

• Unique spring-loaded bar maintains constant tension

during tape application

• For tape rolls up to 3" wide on a 3" core

72mm

(3") 22922-0 6

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Box Sealing Tape Dispensers

Duct Tapes

3M™ Particulate Respirators

IMPORTANT: Before use of these respiratory protection

products, a written respiratory protection program must be

implemented, meeting all the requirements of OSHA 29 CFR

1910.134 such as training, fit testing, medical evaluation

and applicable OSHA substance specific standards.

PLEASE NOTE: All products contain Advanced Electret

Media, noseclip and two straps.

Safety Products

133

See Warning on Page 146

3M™ Particulate Respirator Suggested Application

Nose

Foam

3M™ Cool

Flow™

Valve

Braided

Comfort

Strap

Carbon

Media

Nose-

clip

Welding

Web

Adj.

Straps

Individual

Additional Features UPC

Qty./

Case

Dusty Conditions

8200,

N95

Grinding, Sanding,

Sweeping, Other

dusty operations

APatented

Filter Media

051131-

91913-1 160

8210,

N95 Grinding, Bagging,

Sanding, Sweeping,

Other dusty operations

APatented

Filter Media

051138-

46457-3 160

8210Plus,

N95 APatented

Filter Media

051138-

52924-8 160

8210V,

N95

Grinding, Bagging,

Sanding, Sweeping,

Other dusty operations

APatented

Filter Media

051131-

49711-0 80

8271,

P95

Grinding, Machining,

Sanding, Sweeping, Other

dusty/hot/oily operations

MPatented Filter Media,

Faceseal

051138-

54285-1 80

8511,

N95

Grinding, Bagging,

Sanding, Sweeping,

Other hot/dusty operations

MPatented Filter Media,

Soft Inner Materials

051138-

54343-8 80

9105,

N95 Grinding, Bagging,

Sanding, Sweeping,

Sawing, Other

hot/dusty operations

A Flat fold design,

two sizes available,

v-shaped pleats

flex with mouth

movement

051131-

17397-7 400

9105S,

N95 A051131-

17394-6 400

9210+,

N95 Grinding, Bagging,

Sanding, Sweeping, Other

hot or arid operations

A Three-panel flat fold

design, Patented

Filter Media,

Individual Packaging,

Collapse Resistant

051131-

37192-2 240

9211+,

N95 A051131-

37193-9 120

Welding and Metal Pouring

8212,

N95

Welding, Torch cutting,

Brazing, Soldering,

Metal pouring

APatented

Filter Media,

Faceseal, Cake

Resistant Media

051138-

54141-0 80

8214,

N95

Welding, Torch cutting,

Brazing, Soldering, Metal

pouring, Stainless,

Galvanized

OV*

OZ** A051138-

66192-7 80

*OV: 3M recommended for relief against nuisance levels of organic vapors. Nuisance level refers to concentrations not exceeding the OSHA PEL or applicable government exposure limits, whichever is lower.

**OZ: 3M recommended for ozone protection up to 10 times the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH approved for use against ozone.

M = M-noseclip A = Adjustable noseclip

3M™ Particulate Respirator Suggested Application

Nose

Foam

3M™ Cool

Flow™

Valve

Braided

Comfort

Strap

Carbon

Media

Nose-

clip

Welding

Web

Adj.

Straps

Individual

Additional Features UPC

Qty./

Case

Welding and Metal Pouring (cont.)

8512,

N95

Welding, Soldering

and other applications

where metal fumes

are present including

ozone** and nuisance

level organic vapors*

A — 051138-

66298-6 80

8514,

N95 A — 051138-

66299-3 80

8515,

N95

Welding, Torch cutting,

Brazing, Soldering MPatented

Filter Media

051131-

07189-1 80

Nuisance Level Odor

8246,

R95

Aluminum, Smelting,

Paper processing, Brewing

operations, Glass etching,

Chemical processing

AG†A — 051131-

54357-5 120

8247,

R95

Foundry operations,

Undercoating, Lab

settings, Agriculture,

Petrochemical processing

OV* A — 051131-

54358-2 120

8516,

N95

Aluminum, Smelting,

Paper processing, Brewing

operations, Glass etching,

Chemical processing

AG†M Softer Inner Materials 051131-

66392-1 80

8576,

P95

Aluminum, Smelting,

Paper processing, Brewing

operations, Glass etching,

Chemical processing

AG†M Softer Inner Materials 051131-

54370-4 80

8577,

P95

Foundry operations,

Undercoating, Lab

settings, Agriculture,

Petrochemical processing

OV* M Softer Inner Materials 051131-

54371-1 80

**OZ: 3M recommended for ozone protection up to 10 times the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH approved for use against ozone.

M = M-noseclip A = Adjustable noseclip

134

Technologies

3M™ Cool Flow™

Exhalation Valve.

Proprietary one-way

valve for easy

exhalation and cool,

dry comfort.

Advanced

Electret Media.

Electrostatically charged

microfibers help make

breathing easier and

cooler.

Adjustable

Buckle Straps.

A single tug helps provide

a comfortable, secure fit.

M-noseclip.

Adjusts easily

for fewer pressure

points and greater

comfort.

Carbon Filter Material.

Carbon layers remove

many nuisance level

odors* for greater wearer

comfort.

P-series Filter.

Featuring Advanced

Electret Media, appropriate

for prolonged use in oil

and non-oil containing

environments.

Faceseal.

Soft and secure,

conforms closely

to face for long-

lasting comfort.

Cake-resistant

Filter Media.

Specially designed filter

layers for welding provide

longer respirator life

and easier breathing.

Compatibility.

Accommodates a wide

range of safety equipment,

including eye and hearing

protection.

*Nuisance level odors refers to concentrations not exceeding the OSHA PEL or other applicable government exposure limits, whichever is lower.

See Warning on Page 146

Safety Products

3M™ Particulate Respirators

3M™ Full and Half Facepiece Reusable Respirators

Respirator and filters provide an easy-to-use, comfortable, wide range of respiratory protection. Applications: Use in a variety of

applications including painting, welding, metalworking and auto manufacturing (when used with appropriate cartridges, filters or

supplied air).

135

1. Choose Facepiece

Half Facepiece

5000 Series 6000 Series 7500 Series

Features and Benefits Features and Benefits Features and Benefits

• Single use respirator

cartridges are

permanently attached

• Made from soft,

lightweight thermoplastic elastomer

• No ongoing maintenance necessary

• Resealable storage bag helps keep

respirator clean between uses

• Low profile design provides wider field of vision and

greater comfort while wearing goggles or glasses

• For convenience and simplicity, some respirator

assemblies come with 3M™ Filters P95 along with

3M™ Filter Retainers 501

• Made from soft, lightweight

thermoplastic elastomer

• Easy to adjust head straps

• Supplied with reclosable

storage bag

• Swept back design improves balance and visibility

• NIOSH approved for negative pressure air purifying

and positive pressure dual airline applications

• Can be used with 3M™ Filters and Cartridges

or 3M™ Dual Airline System

• Available with a standard or drop-down head harness

option. Drop-down model allows wearers to lower the

respirator without removing hard hat or faceshield.

• Made from soft,

resilient silicone and

heat resistant plastics

• Unique head harness

design gives to the user the

option of wearing the respirator

in traditional or drop-down mode

• 3M™ Cool Flow™ Exhalation

Valve makes breathing easier,

and helps reduce heat and

moisture buildup in the

facepiece and provides

cool, dry comfort

3M™ Half Facepiece Respirator

Product Model Size UPC Qty./Case

5000 Series 51P71 S 051138-66068-5 12

5000 Series 52P71 M 051138-66069-2 12

5000 Series 53P71 L 051138-66070-8 12

6000 Series 6100 S 051131-07024-5 24

6000 Series 6200 M 051131-07025-2 24

6000 Series 6300 L 051131-07026-9 24

7500 Series 7501 S 051131-37081-9 10

7500 Series 7502 M 051131-37082-6 10

7500 Series 7503 L 051131-37083-3 10

3M™ Full Facepiece Respirator

Product Model Size UPC Qty./Case

6000 Series 6700 S 051131-54145-8 4

6000 Series 6800 M 051131-54146-5 4

6000 Series 6900 L 051131-54159-5 4

7800S Series 7800S-S S 051138-54257-3 1

7800S Series 7800S-M M 051138-54258-0 1

7800S Series 7800S-L L 051138-54259-7 1

FF-400 Series FF-401 S 051135-89418-2 4

FF-400 Series FF-402 M 051135-89421-2 4

FF-400 Series FF-403 L 051135-89424-3 4

See Warning on Page 146

Full Facepiece

6000 Series 7800S Series FF-400 Series

Features and Beneﬁts Features and Beneﬁts Features and Beneﬁts

• Soft, silicone faceseal

• Four strap suspension for

easy donning and dofﬁng

• Bayonet attachment

• Swept back cartridge design

• Wide ﬁeld of vision

• Meets all the requirements of

ANSI Z87.1-2003 for high impact (Z87+)

• Integrated optical correction limits distortion

as you look from the left to the right

• Directs exhaled breath and moisture downward

• Smooth surface allows for quick and easy cleaning

• Available with negative pressure and dual airline models

• Double-ﬂange faceseal

and six adjustable straps

help provide a secure ﬁt

• Made of silicone for increased

comfort and durability

• Extra-large inhalation

and exhalation valves

help make breathing easier

• Use with 3M™ Filters and Cartridges and/or

a variety of powered and supplied air systems

• Large lens featuring

Scotchgard™ Protector

• Passive speaking diaphragm

• 3M™ Cool Flow™ Valve

makes breathing easier,

helps reduce heat and

moisture buildup in the

facepiece, and provides cool, dry comfort

• Durable, long-lasting head harness and comfort cradle

• Soft, silicone nose cup and faceseal

Note: When used in supplier air mode, employer must provide a minimum of Grade D breathing air in accordance with OSHA requirements.

Safety Products

3M™ Particulate Filters and Gas/Vapor Cartridges

These filters and cartridges can be used interchangeably with 3M™ Reusable Respirators 6000, 7000 and FF-400 Series.

136 See Warning on Page 146

3M™ Particulate Filter 7093, P100

• Unique, spring-loaded

filter cover design

simplifies negative

pressure user

seal checks

• Swept-back design

provides enhanced field

of view and greater comfort

• 7093C offers a lightweight, low profile

design that combines P100 filtration with

carbon-loaded features found in heavier

combination cartridge products

Product Number/Description UPC Qty./Case

7093 Particulate Filter, P100 051131-52705-3 60

7093B Particulate Filter,

P100, Bulk 051131-52706-0 144

7093C

Cartridge/Filter,

Hydrogen Fluoride,

P100, with Nuisance

Level Organic Vapor/

Acid Gas Relief*

051131-37173-1 60

2. Choose Filter/Cartridge Combination

3M™ Particulate Filters 2000 Series

• Lightweight and easy to breathe through

• Assortment of filters available for a wide

range of applications

• Easier breathing through new 3-layer

advanced Electret Filter Media in 2200

Series Filters

Product Number/Description UPC Qty./Case

2071 Particulate Filter, P95 051138-54356-8 50

2076HF Particulate Filter, Hydrogen Fluoride/P95, with Nuisance Level Acid Gas Relief* 051138-54369-8 50

2078 Particulate Filter, P95 with Nuisance Level Organic Vapor/Acid Gas Relief* 051138-54368-1 50

2091 Particulate Filter, P100 051131-07000-9 50

2096 Particulate Filter, P100, with Nuisance Level Acid Gas Relief* 051138-54295-5 50

2097 Particulate Filter, P100, with Nuisance Level Organic Vapor Relief* 051131-07184-6 50

2291 Advanced Particulate Filter, P100 051131-17170-6 50

2296 Advanced Particulate Filter, P100, with Nuisance Level Acid Gas Relief* 051131-17171-3 50

2297 Advanced Particulate Filter, P100, with Nuisance Level Organic Vapor Relief* 051131-17172-0 50

Filter Retainer and Filter Adapters

for Particles

Adapter 502*** Retainer 501 Adapter 603

100/Case 100/Case 16/Case

051138-

21511-3

051138-

17668-1

051138-

54376-6

***Do not reuse

Particles

Filter Retainer and Filter Adapters

for Particles

Adapter 502*** Retainer 501

100/Case 100/Case

051138-21511-3 051138-17668-1

***Do not reuse

3M™ Gas/Vapor Cartridges

6000 Series

• Low-profile design helps maintain

good field of vision

• Full range of cartridges to meet

your needs

Product Number/Description UPC Qty./Case

6001 Cartridge, Organic Vapor 051138-21674-5 30 pairs

6002 Cartridge, Acid Gas** 051138-28880-3 30 pairs

6003 Cartridge, Organic Vapor/Acid Gas** 051138-07047-4 30 pairs

6004 Cartridge, Ammonia/Methylamine 051138-28882-7 30 pairs

6005 Cartridge, Formaldehyde/Organic Vapor 051138-28883-4 30 pairs

6006 Cartridge, Multi Gas/Vapor** 051138-54186-1 30 pairs

6009 Cartridge, Mercury Vapor or Chlorine 051138-29148-3 30 pairs

Gases and Vapors

* 3M recommended for relief against nuisance levels of organic vapors and acid gases. Nuisance level organic vapor and acid gas refers to concentrations not exceeding OSHA PEL or applicable

government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases or organic vapors (except hydrogen ﬂuoride).

** Reminder: These cartridges are approved for respiratory protection from hydrogen sulﬁde gas up to 10 times the permissible exposure limit (PEL) with half facepiece respirators and full

facepiece respirators when qualitatively ﬁt tested, or up to less than 300 parts per million (ppm) with full facepiece respirators when quantitatively ﬁt tested or according to speciﬁc OSHA

standards or applicable government regulations, whichever is lower. 300 ppm is the concentration considered Immediately Dangerous to Life or Health (IDLH) for hydrogen sulﬁde.

†

As recommended by the California Department of Pesticide Regulation No. 01-009-Methyl Bromide Field Fumigation. 3M recommended for use against radioiodine and methylbromide.

Note: Not NIOSH approved for methylbromide or radioiodine.

3M™ Combination Cartridges/P100

Particulate Filters 6000 Series

• Particulate filter is permanently attached

to cartridge for easy, one-step assembly

• Unique design for enhanced comfort

and visibility

Product Number/Description UPC Qty./Case

60921 Cartridge/Filter, Organic Vapor/P100 051138-46465-8 30 pairs

60922 Cartridge/Filter, Acid Gas/P100** 051138-46466-5 30 pairs

60923 Cartridge/Filter, Organic Vapor/Acid Gas/P100** 051138-46467-2 30 pairs

60924 Cartridge/Filter, Ammonia/Methylamine/P100 051138-46468-9 30 pairs

60925 Cartridge/Filter, Formaldehyde/Organic Vapor/P100 051138-46469-6 30 pairs

60926 Cartridge/Filter, Multi-Gas/Vapor/P100** 051138-54187-8 30 pairs

60928 Cartridge/Filter, Organic Vapor/Acid Gas/P100**†051138-46470-2 30 pairs

60929 Cartridge/Filter, Mercury Vapor/Chlorine Gas/P100 051138-46471-9 30 pairs

Particles and Vapors

Safety Products

137

See Warning on Page 146

3M™ Speedglas™ 9100 Welding Helmets

• Radically-new design fundamentally changes not only how the user wears the helmet,

but also how the welder experiences the helmet’s fit, stability and balance

• ADFs 9100V, 9100X and 9100XX have dark shades 5, 8–13 (shade 3 in the light state), sensitivity adjustment

that allows use with all Stick, MIG and TIG processes, as well as grinding and torch cutting modes

• Viewing areas: 9100V = 6.05 in2; 9100X = 9.12 in2; 9100XX = 12.11 in2

Description Product Number Shade UPC Qty./Case

9100 Series Welding Helmet with ADF 9100V 06-0100-10 3, 5, 8–13 051135-89353-1 1

9100 Series Welding Helmet with Side Windows and ADF 9100V 06-0100-10SW 3, 5, 8–13 051135-89354-8 1

9100 Series Welding Helmet with ADF 9100X 06-0100-20 3, 5, 8–13 051131-37172-9 1

9100 Series Welding Helmet with Side Windows and ADF 9100X 06-0100-20SW 3, 5, 8–13 051135-89356-2 1

9100 Series Welding Helmet with ADF 9100XX 06-0100-30 3, 5, 8–13 051131-37191-0 1

9100 Series Welding Helmet with Side Windows and ADF 9100XX 06-0100-30SW 3, 5, 8–13 051135-89387-6 1

3M™ Speedglas™ 100 Welding Helmets

• Auto-Darkening Filters (ADF) 100V, 100S-10 and 100S-11 are good for Stick, MIG and most TIG welding and offer excellent optical quality

• ADF 100V has dark shades 8–12 (shade 3 in the light state) and three user-selectable sensitivity levels for reliable arc detection

• ADFs 100S-10 and 100S-11 have shades 3 and 10 or 11 respectively

• Viewing area: 6.05 in2

Description Product Number Shade UPC Qty./Case

Black Welding Helmets

100 Series Welding Helmet with ADF 100V 07-0012-31BL 3, 8–12 051131-49529-6 1

100 Series Welding Helmet with ADF 100S-10 07-0012-10BL 3, 10 051131-37230-6 1

100 Series Welding Helmet with ADF 100S-11 07-0012-11BL 3, 11 051131-37231-3 1

Graphic Welding Helmets

Blazed 100 Series Welding Helmet with ADF 100V 07-0012-31BZ 3, 8–12 051131-37233-7 1

Aces High 100 Series Welding Helmet with ADF 100V 07-0012-31AH 3, 8–12 051131-37237-5 1

American Pride 100 Series Welding Helmet with ADF 100V 07-0012-31AP 3, 8–12 051131-37238-2 1

Boneyard 100 Series Welding Helmet with ADF 100V 07-0012-31BY 3, 8–12 051131-49950-8 1

Xterminator 100 Series Welding Helmet with ADF 100V 07-0012-31XT 3, 8–12 051131-49958-4 1

Tribute 100 Series Welding Helmet with ADF 100V 07-0012-31TB 3, 8–12 051141-56076-2 1

Women’s Welding Helmets

Wild-N-Pink 100 Series Welding Helmet with ADF 100V 07-0012-31WP 3, 8–12 051131-37229-0 1

Blazed Aces HighBlack American Pride Wild-N-Pink

Xterminator TributeBoneyard

Safety Products

3M™ Speedglas™ Welding Helmets

138 See Warning on Page 146

3M™ Speedglas™ SL (Super Light) Welding Helmet

• Only 12.6 oz. (including filter)

• ADF has variable shades 8–12 and 4 sensitivity levels

• Head suspension increases adjustability

Description Product Number Shade UPC Qty./Case

SL Welding Helmet with ADF 05-0013-41 3, 8–12 051131-98564-3 1

3M™ Speedglas™ 9100 FX Welding Helmets

• Innovative wide-view grinding visor to give welders an all-in-one solution for more flexibility, precision, and efficiency

• Exceptionally clear, wide grinding visor offers a greater field of view in all directions, while a smooth flip-up pivot

mechanism assures effortless transition from welding to grinding modes

• ADFs 9100V, 9100X and 9100XX have dark shades 5, 8–13 (shade 3 in the light state), sensitivity adjustment

that allows use with all Stick, MIG and TIG processes, as well as grinding and torch cutting modes

• Viewing areas: 9100V = 6.05 in2; 9100X = 9.12 in2; 9100XX = 12.11 in2

Description Product Number Shade UPC Qty./Case

9100 FX Series Welding Helmet with Side Windows and ADF 9100V 06-0600-10SW 3, 5, 8–13 051131-49671-2 1

9100 FX Series Welding Helmet with Side Windows and ADF 9100X 06-0600-20SW 3, 5, 8–13 051131-49673-6 1

9100 FX Series Welding Helmet with Side Windows and ADF 9100XX 06-0600-30SW 3, 5, 8–13 051131-49675-0 1

Speedglas 100 Super Light (SL) Speedglas 9100

Viewing Area 1.73" x 3.66" (44mm x 93mm) 1.68" x 3.57" (91mm x 43mm)

9100V: 1.8" x 3.7" (44mm x 93mm)

9100X: 2.1" x 4.2" (54mm x 107mm)

9100XX: 2.8" x 4.2" (73mm x 107mm)

Dark State Options Shades 8–12 (variable)

Shade 10 or Shade 11 (single shade) Shades 8–12 (variable) Shades 5, 8–13 (variable)

Weight — Complete

Assembly (Ounces)

15 (Black Helmet)

16 (Graphic Helmet) 13

9100V: 18.0 (18.9 w/SideWindows)

9100X: 18.3 (19.2 w/SideWindows)

9100XX: 19.2 (20.1 w/SideWindows)

Special Modes None Automatic on/off Grinding, Tacking*, Lock-in Dark State

Switching Speed

(Milliseconds) 0.1 < 0.15 0.1

Battery Life (Hours) 1,500 1,500

9100V: 2,800

9100X: 2,500

9100XX: 2,000

Sensitivity Modes 3 levels 4 levels 5 levels

*Patented feature — ONLY available on 3M™ Speedglas™ 9100 Series Welding Helmets

Safety Products

3M™ Speedglas™ Welding Helmets

3M™ Speedglas™ Auto-Darkening Filters (ADF)

Product Number/Description Model UPC Qty./Case

3M™ Foam Earplug 1100 and 3M™ Corded Foam Earplug 1110

• Smooth dirt resistant surface and tapered shape fit

the ear canal and provide added comfort and hygiene

• Hypo-allergenic material

• Each package is easy to dispense

• Noise Reduction Rating: 29 dB*

• Available in corded and uncorded versions

1100

(uncorded) 051138-29008-0 1000 Pairs

1110

(corded) 051138-29009-7 500 Pairs

3M™ Pistonz™ Earplugs P1400 and 3M™ Pistonz™ Corded Earplugs P1401

• Instant-use — No need to roll down

• Stem is stiff enough for insertion, yet designed to flex sideways if impacted

• Metallic-style earplug tips with ultra-soft feel for all day wear

• Officially licensed hearing protection of NASCAR®

• Noise Reduction Rating: 29 dB*

• Available in corded and uncorded versions

P1400

(uncorded) 93045-93401-7 400 Pairs

P1401

(corded) 93045-93402-4 400 Pairs

3M™ E-A-R™ Classic™ Uncorded Earplugs 310-1001

• Conforms to the shape of the ear canal to help create a comfortable,

snug noise barrier

• Pillow pak keeps these disposable earplugs available, reusable and clean

• Slow-recovery earplug foam is non-flammable and moisture resistant

• Meets ANSI S3.19-1974; CSA Class AL

• Noise Reduction Rating: 29 dB*

310-1001 80529-10000-6 2000 Pairs

3M™ E-A-Rsoft™ Yellow Neons™

• Noise Reduction Rating: 33 dB* (Highest NRR available)

• Soft foam provides low pressure with excellent attenuation

312-1250

(uncorded) 80529-12063-9 2000 Pairs

311-1250

(corded) 80529-11033-3 2000 Pairs

3M™ E-A-R™ UltraFit™

• Noise Reduction Rating: 25 dB*

• Flanged design for comfortable fit

• Conforms to shape of ear

• Washable, promotes worker hygiene

• No rolling or touching plug portion during insertion

340-4003

(uncorded) 80529-40002-1 400 Pairs

340-4004

(corded) 80529-40003-8 400 Pairs

340-4002

(corded w/case) 80529-40001-4 200 Pairs

* Research suggests that many users will receive less noise reduction than indicated by the NRR due to variation in earplug fit and wearing time.

It is recommended that the NRR be reduced by 50% for estimating the average amount of noise reduction provided.

Hearing Conservation

3M offers a wide variety of solutions to help reduce noise exposure. A full line of comfortable, easy-to-use hearing protectors,

including earplugs, ear muffs, and banded hearing protectors are available from 3M.

139

See Warning on Page 146

Safety Products

Product Number/Description Model UPC Qty./Case

3M™ E-A-R™ Push-Ins™ with Grip Rings

• Shaped for comfort and gripped for fit

• Noise Reduction Rating: 30 dB*

• Easy fit with no roll down required

• Foam softens with body heat

• Grip Ring design to gently hug ear canal

318-1008

(uncorded) 80529-18010-7 2000 Pairs

318-1009

(corded) 80529-18011-4 2000 Pairs

3M™ E-A-R™ Push-Ins™

• Easy fit with no roll down required

• Noise Reduction Rating: 28 dB*

• E-A-Rform™ yellow foam tip for great comfort

• Blue stem allows for hygienic insertion and removal

318-1000

(uncorded) 80529-18017-9 400 Pairs

318-1001

(corded) 80529-18017-9 400 Pairs

3M™ E-A-Rflex™ Banded Hearing Protector

• Noise Reduction Rating: 25 dB*

• Highest NRR for a semi-insert in all three positions

• Comfortable, lightweight alternative to earmuffs

• Band helps prevent loss and is good for intermittent use

350-1001

(band w/tips) 80529-50007-3 10/Box

350-1002

(replacement

tips)

80529-50008-0 5 Pair/Pack

3M™ E-A-R™ One Touch™ Base and “No Waste Funnel” with Classic™ and Yellow Neon™ Plugs Banded Hearing Protector

• “No Waste Funnel” allows users to reuse base and dispenser

• One Touch™ base can be used as a table top unit or wall mounted

• Easy access for the user from all sides

• No waste of packaging for individual earplugs

391-1000

(dispenser) 80529-91000-1 1/Box

391-1001

(Classic™

replacement

bottle)

80529-91001-8 2000 Pairs

391-1004

(Yellow Neon™

replacement

bottle)

80529-91004-9 2000 Pairs

* Research suggests that many users will receive less noise reduction than indicated by the NRR due to variation in earplug fit and wearing time.

It is recommended that the NRR be reduced by 50% for estimating the average amount of noise reduction provided.

140 See Warning on Page 146

Safety Products

Hearing Conservation

Product Number/Description Model UPC Qty./Case

3M™ Peltor™ Optime™ 95 Banded Hearing Protector

• Ideal against high-frequency noise with work areas

including machine shops and power tools

• Ultra light with liquid/foam filled ear cushions

• Low profile earmuff and neckband

• NRR 21 dB*

H6A/V

(Headband style) 93045-08061-5 10/Case

H6B/V

(Neckband style) 93045-08062-2 10/Case

H6P3E/V

(Helmet-attachment

style)

93045-08065-3 10/Case

3M™ Peltor™ Optime™ 101 Banded Hearing Protector

• Excellent attenuation at low and high frequencies

• Enables safe working environment for longer periods

of time, up to 101dBA

• Two low mounting points provide great comfort

• H7A: NRR 27 dB*

• H7B: NRR 26 dB*

• H7P3E: NRR 24 dB*

H7A

(Headband style) 93045-08071-4 10/Case

H7B

(Neckband style) 93045-08072-1 10/Case

H7P3E

(Helmet-attachment

style)

93045-08073-8 10/Case

3M™ Peltor™ X-Series Earmuffs

• Newly designed spacer, specially formulated foam liners and innovative ear

cushions to help improve attenuation

• Lightweight, lower-profile earmuffs increase compatibility with other personal

protective equipment

• D esigned for protection against moderate-to-high level industrial noise

• Replaceable ear cushions and foam liners

• Earcup pivot points tilt for optimum comfort and efficiency

X4A

• Electrically insulated wire headband, often referred to as “dielectric”

• Wire headband offers consistent pressure over prolonged wearing periods

• NRR 27 dB* (CSA Class AL)

X4P3E

• Universal mounting attachment fits most hard hats

• Stainless steel band construction resists bending and warping to offer

consistent pressure over prolonged wearing periods

• NRR 25 dB* (CSA Class A)

X4A

(Over-the-Head) 93045-93726-1 10/Case

X4P3E

(Cap-Attached) 93045-93731-5 10/Case

* Research suggests that many users will receive less noise reduction than indicated by the NRR due to variation in earplug fit and wearing time.

It is recommended that the NRR be reduced by 50% for estimating the average amount of noise reduction provided.

141

See Warning on Page 146

3M™ Noise Indicator NI-100

Product Number/Description Model UPC Qty./Case

• LED light clearly indicates when noise levels exceed a potentially hazardous threshold

• Helps identify areas where hearing protection may need to be worn

• Clip to a shirt or jacket

NI-100 051131-17453-5 10

• Charging cord

• Sold separately NI-CHG 051131-17475-9 10

Safety Products

Hearing Conservation

142 See Warning on Page 146

3M™ Protective Eyewear

3M eye protection products help provide wearer comfort,

safety and a fashionable look. They are available in

several designs to meet the needs of a wide variety of

people and conditions.

Product Number/Description Model Color UPC Qty./Case

3M™ SecureFit™ Protective Eyewear

• Stylish, lightweight design weighs less than 1oz.

• Proprietary 3M™ Pressure Diffusion Temple (PDT)

Technology helps provide a secure, snug fit without

compromising comfort

• Self-adjusts to fit a wide array of head sizes

• Anti-fog coated lenses absorbs 99.9% UV

• Meets the highest ultraviolet filter rating of

ANSI Z87.1-2010 standard (U6)

• Meets the requirements of CSA Z94.3-07

and is Impact Rated to ANSI Z87.1-2010

SF201AF Clear

Anti-Fog Lens 78371-65717-5 20/Case

SF202AF Gray

Anti-Fog Lens 78371-65718-2 20/Case

SF203AF Amber

Anti-Fog Lens 78371-65719-9 20/Case

3M™ Virtua™ CCS Protective Eyewear with Foam Gasket

• Comfortable, lightweight frame features the Cord Control

System (CCS) designed to keep a corded earplug

attached, untangled and ready for use

• Optional foam gasket attachment helps limit eye exposure

to nuisance dust while providing additional cushioning

• Anti-fog polycarbonate lenses absorb 99.9% UV

• Meets the requirements of CSA Z94.3-07

and is Impact Rated to ANSI Z87.1-2010

11872-

00000-20

Clear

Anti-Fog Lens 78371-11872-0 20/Case

11873-

00000-20

Gray

Anti-Fog Lens 78371-11873-7 20/Case

11874-

00000-20

I/O Mir

Anti-Fog Lens 78371-11874-4 20/Case

3M™ Virtua™ AP Protective Eyewear

• Popular unisex styling

• Lightweight frame—less than 1 oz.

• Meets ANSI Z87.1-2010 High Impact

Requirements standards

• Contoured flexible temples for comfortable fit

• High-wrap lenses fit snug against the face,

for wider viewing area.

11815-

00000-20

Gray

Hard Coat Lens 78371-11815-7 10/Box

11818-

00000-20

Clear

Anti-Fog Lens 78371-11818-8 10/Box

11819-

00000-20

Clear

Hard Coat Lens 78371-11819-5 10/Box

11847-

00000-20

Indoor/Outdoor Mirror

Hard Coat Lens 78371-11847-8 10/Box

3M™ Light Vision™ 2 Protective Eyewear

• Ultra-bright, adjustable LED lights

• Long-lasting batteries provide up to 50 hours

of continuous use

• Soft nose bridge and temple tips

• Available in readers with three bifocal

magnification strengths: +1.50, +2.00, +2.50

• Polycarbonate lenses absorb 99.9% UV

• Meets the requirements of CSA Z94.3-2007 and

the High Impact Requirements of ANSI Z87.1-2003

11476-

00000-10

Gray Frame/

Clear Anti-Fog Lens 78371-62111-4 10/Case

3M™ Lexa™ Protective Eyewear

• Extra wide viewing range and contoured design

• Lightweight, full coverage eye protection

• Fully customizable with multiple lens options,

three lens angles and four temple lengths

• Meets ANSI Z87.1-2003 and CSA Z94.3-2007

15200-

00000-20

Clear Anti-Fog Lens/

Black Temple 78371-62287-6 20/Case

15250-

00000-20

MinimIzeR™ Lens/

Black Temple 78371-62299-9 20/Case

3M™ BX™ Reader Protective Eyewear

• Sleek, contoured and fully adjustable with molded-in

magnifying diopters on the upper and lower lenses

(11374: +1.5 Diopter; 11375: +2.0 Diopter;

11376: +2.5 Diopter)

• Polycarbonate lenses absorb 99.9% UV

• Meets the requirements of CSA Z94.3-2007 and

the High Impact Requirements of ANSI Z87.1-2003

11374-

00000-20

Silver/Black Frame/

Clear Anti-Fog Lens 78371-62046-9 20/Case

11375-

00000-20

Silver/Black Frame/

Clear Anti-Fog Lens 78371-62047-6 20/Case

11376-

00000-20

Silver/Black Frame/

Clear Anti-Fog Lens 78371-62048-3 20/Case

Safety Products

143

3M™ Maintenance Sorbents

Product Number/Description Model Size UPC Qty./Case

Folded M-FL550DD, High Capacity

• Easy-to-use solution for cleaning up spills, drips and fluid leaks

• Versatile: can be used in pillow, pad, roll or boom configuration

• Scrim on one side to increase strength and help eliminate linting

• Dispenses from a carrying/dispenser box in the form of a

continuous roll

• Less waste: perforated every 16 inches so you can select the

length required

• Absorbs 31.5 gallons per case

• Applications range from maintenance to spill response

M-FL550DD 5" x 50' 051138-29071-9 3

Rug M-RG36300E

• Use in areas where foot and vehicle traffic is a concern

• Will sorb non aggressive liquids while enduring the

punishment of being tread upon

• Durable and versatile

• Use in industrial maintenance applications

• Absorbs 32 gallons per rug

M-RG36300E 36" x 300' 051138-29002-3 1

Mini-Boom

• Tube-like shape is ideal for placing around machinery to contain

spills and prevent leaks from spreading into adjacent work areas

• 3 inch diameter scrim on the outside of the boom identifies the

use while containing particulate sorbent material designed for

the application

• Absorbs 12 gallons per case

M-MB304 3" x 4' 051138-21526-7 12

M-MB308 3" x 8' 051138-21527-4 6

3M™ Petroleum Sorbents

Product Number/Description Model Size UPC Qty./Case

Pad HP-156, High Capacity

• Low-profile design can be easily placed in tight areas

• Ideal for cleaning up small spills and wiping down contaminated areas

• Has a scrim on one side to increase strength and help eliminate linting

• Conveniently sized, allows the user to quickly spread sorbent over and

in the path of a spill

• Can also be used on a work surface in anticipation of a spill

or as a wipe

• Absorbs 37.5 gallons per bale

HP-156 17" x 19" 051138-28911-4 100

Pad T-151

• This highly sorbent pad features a low-profile design for easy

placement in tight areas

• Ideal for cleaning up small spills and wiping down contaminated areas

• Absorbs 43.5 gallons per bale

T-151 17" x 19" 021200-16049-3 200

See Warning on Page 146

3M™ Sorbents

3M™ Maintenance Sorbents: Fast acting, highly absorbent, easy

to use and absorb almost any type of non-aggressive liquids such

as oils, coolants, hydraulic fluids and water. Its high fluid capacity

means the need to change the sorbent is less frequent, saving on

material, labor and disposal costs.

3M™ Petroleum Sorbents: Sorbs oil and other petroleum-based

liquids while repelling water. Available in a variety of configurations

to best suit your needs including folded, pads, booms, pillows,

sweeps, rolls and drum covers.

Safety Products

144 See Warning on Page 146

3M™ Fall Protection

The Height of Confidence — It is our mission at 3M to provide those responsible for the safety of workers at height with reliable

fall arrest equipment. We offer the knowledge and support to help take the fear out of height.

3M™ ReLoad™ Retractable Lifeline

• Can be inspected and serviced

on-site by authorized technicians

for lower maintenance costs

• Clicking sound provides

audible indication that pawls

are functioning correctly

• 400 lbs. max capacity for cable

units; 310 lbs. for web units

• Cable units range from

23–50 feet, available in

galvanized or stainless steel

• Web units range from 7–23 feet

3M™ Thor™ Galvanized

Cable Lifeline

• Durable aluminum housing

• Spring cushion cable guide helps

reduce cable rewind damage

• Swivel top housing for

enhanced mobility

• 310 lbs. max capacity

• Cable units range from

10–30 feet, available in

galvanized or stainless steel

• Web units range from 7–50 feet

3M™ Retractable Lifeline (G-Series)

• Versatile product suitable

for multiple industries

• Assembled in the U.S.A.

from high quality materials

• Rugged durability and

lightweight design

• 310 lbs. max capacity

• Cable units range from

20–50 feet, available in

galvanized or stainless steel

• Web units range from 7–20 feet

Model UPC Qty./Case Model UPC Qty./Case Model UPC Qty./Case

REC-23 78371-01132-8 1 M-30 78371-00359-0 1 GW-11 78371-64164-8 1

3M™ Elavation™ Harness

• The premium 3M™ Fall

Arrest Harness

• Premium padding

• Intuitive adjustment hardware

• Web designed for additional

abrasion resistance

• Rubber protective shield

for label pack

3M™ Ameba Harness

• Features comfort

forming webbing

• Non-elastic helical yarn

moves with wearers to

assist comfort and mobility

• Value padding for added

comfort and moisture wicking

• Laminated sleeve helps

protect label

3M™ SafeLight™ Harness

• The economical choice

in fall arrest harnesses

• Quality construction

at a value price

• Bright color web assists

worker visibility on a jobsite

Model UPC Qty./Case Model UPC Qty./Case Model UPC Qty./Case

7512E 78371-64010-8 1 1451Q 78371-63599-9 1 10950 78371-00081-0 1

Harnesses

3M™ SafeAbsorb™ Dual Leg

Elast Combo Lanyard

• Stretches from 4–6 feet to

help reduce trip hazards

• 310 lbs. rated

• 3,600 lbs. gate

rated hardware

• Integrated shock absorber

3M™ Adjustable Lanyard

w/Rebar Hooks

• Versatile offering of lengths

and hardware for general use

• 310 lbs. rated

• 3,600 lbs. gate rated hardware

• Meets requirements of latest

ANSI Z359.13-2009 standards

• Includes an external shock pack

3M™ SafeLight™ Lanyard

• The economical choice

in fall arrest lanyards

• 310 lbs. rated

• 3,600 lbs. gate rated hardware

• Meets requirements of ANSI

Z359.1-2007 standards

• Available in low-profile or

external shock pack designs

Model UPC Qty./Case Model UPC Qty./Case Model UPC Qty./Case

4750/0241 78371-01437-4 1 3251D-0241 78371-00254-8 1 209512 78371-00103-9 1

Lanyards

Self-Retracting Lanyards

Safety Products

145

See Warning on Page 146

3M™ Beamwalk III

• Lightweight aluminum construction

• Dual axis swivel D-ring helps prevent entanglement

• Smooth sliding, non-chattering

mobility across exposed I and H beams

3M™ Industrial Anchor

• Permanent D-bolt anchor

• Includes nut, bolt and washer hardware

Model UPC Qty./Case Model UPC Qty./Case

4650-3 78371-62716-1 1 4005 78371-00053-7 1

3M™ SafeClaw Reusable Concrete Anchor

• Trigger mechanism allows unit to be easily inserted

and removed from pre-drilled poured concrete

• Available in 5000 lbs. (Model 4075) and

10,000 lbs. (Model 4077) rated designs

3M™ Reusable Roof Anchor

• Hinged anchor for wood and metal decking

• Steel design

• Fits most pitch angles

• Appropriate for Horizontal Lifeline Applications

Model UPC Qty./Case

4075 78371-01071-0 1 Model UPC Qty./Case

4077 78371-01162-5 1 4000 78371-00050-6 1

Anchorage Devices

3M™ General Fall Protection Kit

• Designed for use with rental lifts

• Includes 3M™ SafeLight™ Harness (10910),

6-ft 3M™ SafeLight™ Lanyard (209512) and

tool bag for equipment storage

• Can be personalized with a customer logo

3M™ Roofing Kit

• A complete Personal Fall Arrest System

in a bucket

• Includes 3M™ SafeLight™ Harness (10910),

6-ft 3M™ SafeLight™ Lanyard (209512),

3M™ Reusable Roof Anchor (4000), 50-ft

Lifeline with attached Rope Grab (0221-50RG)

and 5-gallon storage bucket

Model UPC Qty./Case Model UPC Qty./Case

30500 78371-00088-9 1 20058 78371-00086-5 1

Kits

Safety Products

3M™ Fall Protection

146

Safety Products

These eye and face protection products help provide limited eye and face protection. Misuse or failure to follow warnings and instructions may result

in serious potential injury, including blindness or death. For proper use, selection, and applications against flying particles, optical radiation and/or

splash see supervisor, read User Instructions and WARNINGS on the package, or call 3M Occupational Health and Environmental Safety Division (OH&ESD)

Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.

! WARNING: PROTECTIVE EYEWEAR

These welding safety products must be used only by qualified persons trained in their use and maintenance and only in strict accordance with and

adherence to the detailed instructions and precautionary statements provided in the instruction manual which accompanies each product. Failure to

comply with these instructions could result in sickness, serious bodily injury or death. For proper use of these products read User Instructions

and WARNINGS on the package. Any questions concerning proper use should be directed to your supervisor, on-site training specialist, industrial hygienist

or 3M Occupational Health and Safety Division (OH&ESD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.

! WARNING: WELDING PRODUCTS

These hearing protectors help reduce exposure to hazardous noise and other loud sounds. Misuse or failure to wear hearing protectors at all times

that you are exposed to noise may result in hearing loss or injury. For proper use, see supervisor, User Instructions, or call 3M Occupational Health

and Environmental Safety Division (OH&ESD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. If there is any drainage

from your ear or you have an ear infection, consult with your physician before wearing ear plugs. Failure to do so may result in hearing loss or injury.

! WARNING: HEARING PROTECTION

These respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User

Instructions provided as a part of the product packaging. A written respiratory protection program must be implemented meeting

all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards

Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in

sickness or death. For proper use, see package instructions, supervisor, or call 3M Occupational Health and Safety Division

(OH&ESD) Technical Service in U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.

WARNING: RESPIRATORS

Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death

and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed, applicable safety and health

standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630.

To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be

absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations. Caution: Sorbents

may become slippery when used on flooring. Do not walk on sorbent or place in high traffic areas.

! WARNING: SORBENTS

Compliant fall protection and emergency rescue systems help prevent serious injury during fall arrest. Users must read and understand the User Instructions

provided with the product and be properly trained by their employer prior to use per OSHA 1910.66 and 1926.503 or applicable local standards. Misuse or

failure to follow warnings and instructions may result in serious personal injury or death. For proper use, see supervisor, User Instructions, or call

3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.

! WARNING: FALL PROTECTION

Safety Warnings

147

3M™ Maintenance Aerosols

3M’s line of aerosol cleaners are the fast and easy solution for removing grease, grime, inks, and residues on electrical equipment and components.

Product Number/Description Size UPC Qty./Case

3M™ 5-Way Penetrant

• Inhibits rust and corrosion by spreading a thin, even film that actually penetrates

the pores of the surface

• It displaces moisture and “dries out” electrical parts and equipment to help prevent

shorting and increase conductivity

• Spray it on to free rusted, frozen bolts, nuts, and screws

• Lubricate delicate machines and precision instruments

• Penetrates and demoisturizes

• Ideal as a tapping lubricant for stainless steel and aluminum

• Contains no methylene chloride, 1, 1, 1-trichloroethane or chlorofluorocarbons

24 fl. oz. 021200-21305-2 12

3M™ Citrus Base Cleaner

• Multi-purpose cleaner

• Will dissolve and flush away dirt, grease, tar, most noncuring type adhesive films and

similar substances

• Citrus oil-based cleaner that emulsifies when flushed with water

• Contains no petroleum distillates

• Use to clean and degrease metal parts, motors, tools, printing presses and concrete

• Contains no methylene chloride, 1, 1, 1-trichlorofluorocarbons

24 fl. oz. 021200-76394-6 12

3M™ Stainless Steel Cleaner and Polish

• Cleans and polishes stainless steel, chrome aluminum and laminated plastic surfaces

• High gloss in one step

• Contains no ozone depleting chemical

21 fl. oz. 048011-14002-0 12

Product Number/Description Size UPC Qty./Case

Scotch® Vinyl Electrical Tape Super 33+

• Provides primary electrical insulation for splices up to 600V

• Abrasion corrosion and UV-resistant

• Makes an excellent protective jacketing for high-voltage

cables and wire harnessing

• UL listed and CSA certified

• Resists alkalis and acids, flame retardant

• Excellent all-weather performance in cold to 0°F (-18°C)

or hot to 220°F (105°C)

3/4" x 66' 054007-06132-8 100

3M™ Maintenance Aerosols

3M™ Electrical Products

Maintenance and Repair

148

3M™ Safety-Walk™ Matting

Spring-coiled vinyl foam compresses uniformly and continually, providing greater comfort and less fatigue.

Product Number/Description Color Size UPC Qty./Case

3270 (No Edging)

• Economical matting ideal for fatigue resistance

in dry environments

• Textured, solid surface improves traction

and allows debris and liquid to stay on top

of the mat for easy cleanup

• Lightweight for easy moving and repositioning

• No edging

Black 3' x 10' 048011-34821-6 1

Black 3' x 20' 048011-34823-0 1

3270E (Black Edging)

• Economical matting ideal for fatigue resistance

in dry environments

• Textured, solid surface improves traction

and allows debris and liquid to stay on top

of the mat for easy cleanup

• Lightweight for easy moving and repositioning

• Integral edging on the long edge of the mat and

nosing on the ends

Black with Black Edging 3' x 5' 048011-34826-1 1

Black with Black Edging 3' x 10' 048011-34828-5 1

Black with Black Edging 3' x 20' 048011-34830-8 1

Black with Black Edging 4' x 6' 048011-34827-8 1

Black with Black Edging 4' x 10' 048011-34829-2 1

3M™ Facility Care Products

Maintenance and Repair

Notes