Catalog PM 21 2013 1000399356

2016-10-06

: Pdf 1000399356-Catalog 1000399356-Catalog B5 unilog

Open the PDF directly: View PDF .
Page Count: 189 [warning: Documents this large are best viewed by clicking the View PDF Link!]

SIMOTION, SINAMICS S120 & SIMOTICS

Motion Control

SIMOTION, SINAMICS S120 & SIMOTICS

Equipment for Production Machines

Answers for industry.

Catalog

PM 21

Edition

2013

Motion Control Drives D 31

SINAMICS and Motors

for Single-Axis Drives

E86060-K5531-A101-A1-7600

E86060-E5531-A101-A1-7600 (News)

SINAMICS Drives D 11

SINAMICS G130

Drive Converter Chassis Units

SINAMICS G150

Drive Converter Cabinet Units

E86060-K5511-A101-A5-7600

SINAMICS S120 D 21.3

Chassis Format Units and

Cabinet Modules

SINAMICS S150

Converter Cabinet Units

E86060-K5521-A131-A3-7600

SINUMERIK & SINAMICS NC 61

Equipment for Machine Tools

E86060-K4461-A101-A3-7600

E86060-K4461-E101-A1-7600 (News)

SINUMERIK 840D sl Type 1B NC 62

Equipment for Machine Tools

E86060-K4462-A101-A1-7600

SIMATIC ST 70

Products for

Totally Integrated Automation

and Micro Automation

E86060-K4670-A101-B3-7600

E86060-K7010-A121-A1-7600 (News)

SIMATIC HMI / ST 80/ST PC

PC-based Automation

Human Machine Interface Systems

PC-based Automation

E86060-K4680-A101-B9-7600

Industrial Communication IK PI

SIMATIC NET

E86060-K6710-A101-B7-7600

SITRAIN ITC

Training for Automation and

Industrial Solutions

Only available in German

E86060-K6850-A101-C3

CD-ROM for Catalog PM 21 · 2013

Hardware and software requirements:

• Intel Pentium 1 GHz or higher

• Minimum 512 MB of RAM

• Screen resolution 1024 × 768 pixels

• CD-ROM drive, at least 16 ×

• Windows XP/Vista/7

• Acrobat Reader 7.0 or higher

• MS Internet Explorer V6.0 (SP2) or higher

Start

Insert the CD-ROM into the CD-ROM drive.

The program starts automatically.

If the AutoRun function is not activated in your system, start file

start.hta from the CD-ROM using the Windows Explorer.

Note

Installation is not necessary to view the information on this

CD-ROM. This does not apply, however, when using dimensional

drawings in DXF format.

Hotline

Please send any questions or suggestions to:

docu.motioncontrol@siemens.com

Products for Automation CA 01

and Drives

Interactive Catalog

DVD: E86060-D4001-A510-D2-7600

Mall

Information and ordering platform

in the Internet

www.siemens.com/industrymall

In the CD-ROM that accompanies Catalog

PM 21 · 2013, you will find:

• Information about planning/configuring

based on the technical documentation;

additional technical documentation can be

found under:

www.siemens.com/automation/support

• Dimensional drawings of our motors in PDF/

DXF format or via CAD CREATOR

www.siemens.com/cadcreator

• Glossary for the explanation of terms and

functions

• Catalog PM 21 · 2013 in electronic form

(PDF format)

Related catalogs

Motion Control

SIMOTION, SINAMICS S120

& SIMOTICS

Equipment for Production Machines

Catalog PM 21 · 2013

Supersedes:

Catalog PM 21 · 2011

Refer to the Industry Mall for current updates

of this catalog:

www.siemens.com/industrymall

The products contained in this

catalog can also be found in the

Interactive Catalog CA 01.

Order No.:

E86060-D4001-A510-D2-7600

Please contact your local Siemens branch

The products and

systems described in this

catalog are distributed

under application of a

certified quality and

environmental

management system

in accordance with

DIN EN ISO 9001

(Certified Registration

No. 001258 QM) and

DIN EN ISO 14001

(Certified Registration

No. 081342 UM). The

certificate is recognized

by all IQNet countries.

System overview 1

Communication 2

SINAMICS S120 drive system 3

SIMOTICS servomotors 4

SIMOTICS main motors 5

SIMOTICS linear and torque motors 6

Measuring systems 7

MOTION-CONNECT connection systems 8

SIMOTION Motion Control System 9

SIMOTION I/O components 10

SIMOTION HMI devices 11

Safety Integrated 12

System description – Dimensioning 13

Services and documentation 14

Sector-specific solutions 15

Appendix 16

Printed on paper from

sustainably managed

forests and controlled

sources.

www.pefc.org

Siemens PM 21 · 2013

9/2 Overview

9/4 SIMOTION C – Controller-based

9/7 SIMOTION C240/C240 PN

Motion Controller

9/12 SIMOTION P – PC-based

9/17 SIMOTION P320-3 Motion Controller

9/20 SIMOTION P350-3 Motion Controller

9/23 Panel fronts for SIMOTION P

9/24 Supplementary components

9/24 SIMATIC Panel PC Remote Kit

9/25 KBPC CG US standard PC keyboard

9/26 MCI-PN Communication Board

9/27 SIMOTION D – Drive-based

9/31 SIMOTION D410-2 Control Units

9/41 SIMOTION D4x5-2 Control Units

9/53 Supplementary components

9/53 SIMOTION CX32-2

Controller Extension

9/56 CBE30-2 Communication Board

9/57 SIMOTION software

9/58 SIMOTION runtime software

9/61 Runtime software licensing

9/61 Overview of the licensing concept

9/63 Ordering of licenses for

runtime software

9/66 SIMOTION Kernel

9/68 SIMOTION technology packages

9/74 SIMOTION PLCopen blocks

9/75 OPC server

9/77 SIMOTION IT

9/80 SIMOTION engineering software

9/81 SIMOTION SCOUT software package

9/91 Optional packages for

SIMOTION SCOUT

9/91 Optional CamTool package

9/92 Optional Drive Control Chart (DCC)

package

9/93 Free extras for SIMOTION SCOUT

9/93 SIMOTION easyProject

project generator

9/95 SIMOTION Utilities & Applications

9/97 Overview of SIMOTION functions

Part 3

Engineering software

STARTER commissioning tool

Drive Control Chart (DCC)

Drive ES engineering software

Part 13

SIZER for Siemens Drives

engineering tool

Part 14

CAD CREATOR

Dimension drawing and

2D/3D CAD generator

www.siemens.com/cadcreator

SIMOTION

Motion Control System

SIMOTION Motion Control System

Overview

9/2 Siemens PM 21 · 2013

Designation Description Page

SIMOTION C – Controller-based 9/4

SIMOTION C240/C240PN

Motion Controller Motion Controller for analog, stepper, PROFIBUS and

PROFINET drives 9/7

SIMOTION P – PC-based 9/12

SIMOTION P320-3

Motion Controller Motion Controller for embedded PC solutions 9/17

SIMOTION P350-3

Motion Controller Motion Controller for high-performance applications

with Windows XP 9/20

Panel fronts for SIMOTION P Panel fronts for SIMOTION P with touch or key operation 9/23

Supplementary components

SIMATIC Panel PC Remote Kit The SIMATIC Flat Panels and the Panel PC Remote Kit allow the

Motion Controller and control unit to be installed at a distance

from one another

9/24

Standard PC keyboard PC keyboard with palm rest for ergonomic working 9/25

MCI-PN Communication Board Option module for PROFINET 9/26

SIMOTION D – Drive-based 9/27

SIMOTION D410-2

Control Units Compact Control Units for single-axis applications

with multi-axis option 9/31

SIMOTION D4x5-2

Control Units Scalable Control Units for multi-axis applications 9/41

Supplementary components

SIMOTION CX32-2

Controller Extension Modular expansion of the drive's processing power 9/53

CBE30-2

Communication Board Option module for PROFINET 9/56

SIMOTION software 9/57

SIMOTION runtime software 9/58

Runtime software licensing Overview of the licensing concept 9/61

Ordering of licenses for runtime software 9/63

SIMOTION Kernel Structure and functions of the SIMOTION Kernel 9/66

SIMOTION

technology packages Functions of the technology packages 9/68

SIMOTION PLCopen blocks PLCopen blocks for SIMOTION 9/74

OPC server SIMATIC NET OPC server for SIMOTION P350-3 9/75

SIMOTION IT Service and diagnostic functions for SIMOTION 9/77

Positioning Cam Temperature

control

Cam

G_PM10_EN_00128

Other

technologies

Hydraulic

control

Gear

Path interpolation

SIMOTION Motion Control System

Overview

9/3

Siemens PM 21 · 2013

Designation Description Page

SIMOTION engineering software 9/80

SIMOTION SCOUT

software package The engineering system for SIMOTION 9/81

Description of basic functions

SCOUT Workbench, hardware and network configuration,

generation of technological objects, generation of cams,

Structured Text (ST), Motion Control Chart (MCC), ladder

logic/function block diagram (LAD/FBD), diagnostics for testing

and commissioning

9/84

Optional packages for

SIMOTION SCOUT Description of optional packages

CamTool (graphical cam editor),

Drive Control Chart (DCC)

9/91

Free extras for

SIMOTION SCOUT Increase in efficiency when creating projects by using

SIMOTION easyProject 9/93

SIMOTION Utilities & Applications – a comprehensive library

with applications, examples, tools, scripts, FAQs, ... 9/95

Overview of SIMOTION functions 9/97

System cycles PROFIBUS DP and PROFINET cycles;

system cycles for Motion Control 9/97

Dynamic Servo Control (DSC) Position controller in the drive 9/98

Memory and address ranges Memory sizes and address ranges of the Motion Controller 9/98

Drives on SIMOTION Which drives can be operated on SIMOTION? 9/99

Encoders on SIMOTION Which encoders can be directly connected to SIMOTION?

Are there other connection options? 9/101

Measuring inputs How many measuring inputs are provided on the

SIMOTION platforms?

Are there further options for implementing measuring inputs?

9/102

Output cams How many onboard output cams are provided on the

SIMOTION platforms?

Are there further options for implementing output cams?

9/102

Integrated I/O interfaces How many onboard I/O interfaces are provided?

(digital, analog, relay outputs, etc.) 9/103

SIMOTION C centralized

I/O modules How many centralized I/O modules can be added to

SIMOTION C? 9/104

Connectable distributed

I/O modules Which distributed I/O modules can be connected over

PROFIBUS or PROFINET?

Which SINAMICS drive I/Os can be connected to SIMOTION?

9/104

SIMOTION HMI devices Which HMI devices can be connected to SIMOTION? 9/105

HMI software for SIMOTION Which HMI software can be employed for

SIMOTION applications? 9/105

Software for extended

communication with

SIMOTION

Communication according to the standards OPC and

OPC XML-DA, SIMOTION Multipurpose Information Interface 9/105

Communication How many communication interfaces are provided on the

SIMOTION platforms? 9/106

PROFIsafe drives on

SIMOTION How many PROFIsafe drives can be used on SIMOTION? 9/109

SIMOTION Kernel Performance features of the SIMOTION Kernel and

PLC command set 9/110

Motion Control

technology package Features of the Motion Control technology package 9/112

Other technology packages SIMOTION technology packages for special areas of application 9/113

SIMOTION IT Software options for extending the service and

diagnostic functions of SIMOTION 9/113

SIMOTION SCOUT

engineering system SCOUT basic functionality and optional packages 9/114

Testing and diagnostics with

SIMOTION SCOUT Program test functions, trace, comparison function for

projects, etc. 9/115

Engineering drives Drive engineering tools for SIMOTION 9/116

SIMOTION Motion Control System

SIMOTION C — Controller-based

Overview of SIMOTION C

9/4 Siemens PM 21 · 2013

■

Overview

SIMOTION C is the controller variant of the SIMOTION family

with the proven design of the SIMATIC S7-300. Flexible modular

expansion of SIMOTION C is possible thanks to use of the

SIMATIC S7 module spectrum. The SIMOTION C240 and

C240 PN designs represent two powerful Motion Controllers for

advanced control and motion control tasks.

Depending on the SIMOTION C platform, HMI devices can be

operated directly on the onboard PROFIBUS, Ethernet or

PROFINET interfaces for operator control and monitoring.

Functions such as remote maintenance, diagnostics and tele-

service can also be used via these interfaces.

■

Benefits

7Flexible application thanks to use of the SIMATIC S7-300

module spectrum and thus optimal adaptation to the

automation task

7For universal use with digital and analog coupling to servo/

vector, stepper and hydraulic drives (depending on the

variant)

7User-friendly mounting and simple design with no moving

parts

7Versatile networking through onboard PROFIBUS DP,

Industrial Ethernet and PROFINET IO interfaces

7Powerful thanks to a range of integrated functions

7Easy engineering for open-loop control and motion control

applications in the same program

■

Application

SIMOTION C can be used wherever:

• Motion Control, technology and PLC functionalities are to be

programmed, configured and executed in a single unit,

• a modularly expandable device is to be placed near or in the

machine,

• communication with other programmable controllers is

necessary.

SIMOTION C is universally applicable and meets the highest

standards with respect to suitability for industrial use, thanks to

high EMC compatibility and resistance against shock and

vibration loads.

Important applications include:

• Packaging machines

• Plastic and rubber processing machines

• Presses, wire-drawing machines

• Textile machines

• Printing machines

• Wood, glass, ceramics and stone working machines

•Retrofit

Due to the increasing use of servo drives, these machines re-

quire a high degree of integration of PLC, Motion Control and

technology functions.

■

Design

SIMOTION C with central and distributed I/O

The SIMOTION C motion control system is designed with modular

principles in mind. It consists of a comprehensive and individually

combinable hardware spectrum that uses components of the

SIMATIC S7-300 series and Siemens drive technology.

SINAMICS S120

SIMATIC HMI

ET 200ET 200

SIMOTION C

Industrial Ethernet

PROFIBUS

G_PM10_EN_00002d

Factory

network

*) for SIMOTION C240 PN also PROFINET IO

SIMOTION Motion Control System

SIMOTION C — Controller-based

Overview of SIMOTION C

9/5

Siemens PM 21 · 2013

■

Design (continued)

Components and interfaces of the SIMOTION C

Motion Controller:

• Analog drive interfaces (for C240)

- For setpoint outputs to servo/vector drives

- For setpoint outputs to the actuating valves of hydraulic

drives

- As analog outputs for optional use

• Pulse outputs for controlling stepper drives (for C240)

• Interfaces for incremental/absolute encoders for cyclic

acquisition of an actual position value or as freely assignable

up/down counter (for C240)

• Onboard I/O for high-speed I/O signals

• SIMOTION Micro Memory Card (MMC) for storing:

-SIMOTION Kernel

- User programs

- User variables

• Integrated communications interfaces for linking:

- Distributed I/Os

- HMI systems

-PG/PC

- Other Motion Control and automation systems

- Drives with digital setpoint interface

• Various status/error displays and mode selectors

The following components make up a SIMOTION C system:

• Motion Controller and Micro Memory Card (MMC)

• Other system components (depending on requirements)

such as:

- Load power supplies (PS) for connecting SIMOTION C to a

power supply of 120 V/230 V AC

- Central (not onboard) and distributed I/O components

- Servo/vector drives with analog or digital setpoint interface

or stepper drives

Mounting and connection technology

The simple design makes SIMOTION C flexible and easy to

maintain:

• Rail mounting

Simply attach the module to the standard mounting rail, swing

it in and screw it tight.

• Integrated backplane bus

The backplane bus is integrated in the Motion Controller.

The Motion Controller is connected to the I/O modules via bus

connectors which are plugged into the rear of the housing.

• The front connector design prevents front connectors from

being plugged into the wrong module type.

• Screw-type terminals, spring-loaded terminals or FastConnect

system for I/O modules.

• TOP connect

This connection method provides pre-assembled wiring with

1 to 3-wire connection systems with screw-type or spring-

loaded terminal as an alternative to wiring directly on the

I/O module.

• This system uses a standard mounting depth since all con-

nections and connectors are recessed in the module and are

protected and covered by doors on the front.

•No slot rules.

Expansion with central I/O modules

Up to 8 slots can be used to the right of the Motion Controller for

SIMATIC S7-300 I/O modules.

The IM 365 can be used to connect an expansion rack (two-tier

design) to increase the number of slots available for I/O modules

from 8 to 16. Multi-tier configuration with IM 360/IM 361 is not

supported by SIMOTION C.

SIMOTION C can be mounted horizontally or vertically.

If additional I/O modules are required, the distributed

SIMATIC ET 200 I/O can be connected to a SIMOTION C via

PROFIBUS DP or PROFINET IO (for C240 PN).

The number of pluggable I/O modules is also limited by the

power required from the backplane bus. The power consump-

tion of all modules which are connected to the same backplane

bus must not exceed 1.2 A.

Expansion using distributed I/Os

Distributed I/Os can be assembled with intelligent I/O system

components:

• SIMATIC ET 200S

• SIMATIC ET 200SP (for C240 PN)

• SIMATIC ET 200M

• SIMATIC ET 200pro

• SIMATIC ET 200eco

• SIMATIC ET 200eco PN (for C240 PN)

G_PM10_EN_00001

Motion Controller

SIMOTION C

PS1) SIMATIC S7-300

I/O Modules

1) Power supply

SIMOTION Motion Control System

SIMOTION C — Controller-based

Overview of SIMOTION C

9/6 Siemens PM 21 · 2013

■

Function

Basic functionality

SIMOTION C provides the following basic functionality for a wide

variety of automation requirements:

• SIMOTION runtime system

- User-programmable with several languages conforming to

IEC 61131

- Various methods of program execution (cyclic, sequential,

event-driven)

- PLC and arithmetic functionality

- Communication and management functions

- Motion Control functions (Motion Control Basic)

• Testing and diagnostic tools

This basic functionality can be expanded with loadable

technology packages, if required.

SIMOTION technology packages

A special feature of SIMOTION is that the operating system

functionality can be expanded by loading technology packages,

such as:

• Motion Control with the functions:

- POS – Positioning

- GEAR – Synchronous operation/electronic gear

-CAM – Cam

- PATH – Path interpolation

• TControl – Temperature controller

• MIIF – Multipurpose Information Interface

Since the technology functions have modular licenses, you only

pay for what you use.

Configuring/parameterizing/programming

SIMOTION SCOUT is a powerful and user-friendly engineering

tool. It is an integrated system for all engineering steps, from

configuring and parameterization, th rough programming, to

testing and diagnostics. Graphical operator prompting, using

dialog boxes and wizards, as well as text-based and graphical

languages for programming, considerably reduce the familiar-

ization and training periods.

Operator control and monitoring (HMI)

Communication utilities which support user-friendly data ex-

change with HMI devices are integrated in the basic functionality

of the SIMOTION C Controller. Operator control and monitoring

can be implemented using SIMATIC HMI devices, such as TPs

(Touch Panels), OPs (Operator Panels) or MPs (Multi Panels).

These devices can be connected to a SIMOTION C via Industrial

Ethernet, PROFIBUS or PROFINET (for C240 PN). They are con-

figured using ProTool/Pro or WinCC flexible.

With the SIMATIC NET communication software, the open, stan-

dardized OPC interface is available for accessing SIMOTION

from other Windows-based HMI systems.

SIMOTION IT provides SIMOTION C with an integrated Web

server on which, for example, user-specific Web pages can be

stored. Read and write access can be made to the Motion Con-

troller variables. Java scripts or applets also allow the implemen-

tation of active operation and display functions in the Web pages

that can be executed on a client PC with an Internet browser.

Process and data communication

Thanks to its integrated interfaces, SIMOTION C supports both

process and data communication. The SCOUT engineering sys-

tem is provided for user-friendly communication configuration

and diagnostics.

■

More information

• about power supplies and I/O modules can be found in

chapter SIMOTION I/O components.

• about TOP connect can be found in Catalog KT 10.2 and in

the Industry Mall under Automation Technology/Automation

Systems/System cabling/ control cabinets/SIMATIC TOP

connect system cabling.

• about the functionality of SIMOTION platforms can be found in

section Overview of SIMOTION functions.

• about runtime software and engineering software can be

found in section SIMOTION software.

• about the communication functions of the Motion Controllers

can be found in section SIMOTION Runtime software.

• about operator control and monitoring can be found in chapter

SIMOTION HMI devices.

• about SIMATIC NET communication software can be found in

section SIMOTION runtime software.

SIMOTION Motion Control System

SIMOTION C — Controller-based

SIMOTION C240/C240 PN Motion Controller

9/7

Siemens PM 21 · 2013

■

Overview

SIMOTION C is a Motion Controller in S7-300 design. In addition

to the already integrated interfaces, the controller can be ex-

panded using I/O modules from the SIMATIC S7-300 range.

The Motion Controller is available in two versions:

SIMOTION C240 and SIMOTION C240 PN. Although the two

C240 and C240 PN versions have the same PLC and motion

control performance, they differ in their interfaces.

■

Design

Interfaces

Operation, display and diagnostics

• 1 × mode selector

• 1 × LED strip for fault and status indicators

Integrated I/Os

• 18 digital inputs

(C240: of which 2 for local measuring inputs and 4 for global

measuring inputs/zero marks, C240 PN: of which four for

global measuring inputs)

• 8 digital outputs

Drive interfaces (C240)

• 1 × setpoint output interface for up to 4 axes (optionally for

analog, stepper or hydraulic drives; also as freely assignable

analog outputs)

• 4 × encoder inputs for incremental or absolute encoders

(can also be used as freely assignable up/down counters)

Communication

• 1 × interface for Industrial Ethernet

• 2 × interfaces for PROFIBUS DP

(of which one interface is for MPI)

• 3 × ports for PROFINET IO (C240 PN)

Data backup

• 1 × slot for SIMOTION Micro Memory Card (MMC)

Additional interfaces

• Power supply terminals

Data storage/data backup

SIMOTION C Motion Controllers have an integrated non-volatile

data memory for storing process variables.

The data is backed up on a SIMOTION Micro Memory Card

(MMC).

Expansion with central I/O modules

The central I/O is plugged directly into the SIMOTION C Motion

Controller. The I/O configuration for centralized I/O can comprise

of two tiers (second tier using IM 365 interface) with up to 8 I/O

modules each and a total of 4 analog modules. I/O modules from

the SIMATIC S7-300 spectrum can be used here.

Expansion using distributed I/Os

The following can be used as distributed I/O components:

PROFIBUS DP:

• All certified PROFIBUS standard slaves

(DP-V0, DP-V1, DP-V2)

• SIMATIC ET 200S/M/eco/pro distributed I/O systems

• Servo converters of the MASTERDRIVES, SIMODRIVE and

SINAMICS series over PROFIBUS DP interface with

PROFIdrive

• MICROMASTER and COMBIMASTER frequency inverters

• Stepper drives over PROFIBUS DP interface with PROFIdrive

PROFINET IO (C240 PN):

• SIMATIC ET 200S/SP/M/pro/eco PN distributed I/O systems

• SINAMICS S120 servo converters over PROFINET IO with IRT

(PROFIdrive)

SIMOTION Motion Control System

SIMOTION C — Controller-based

SIMOTION C240/C240 PN Motion Controller

9/8 Siemens PM 21 · 2013

■

Function

The control and motion control functionality runs centrally on the

SIMOTION C controller.

The functionality ranges from simple positioning to complex

motion control tasks over cams and interpolation.

Position-controlled motion control

Setpoint output/actual value acquisition

• Position control with analog setpoint output

For each axis, the SIMOTION C240 Motion Controller provides

one analog output for the speed setpoint and one encoder in-

put for cyclic detection of the actual position value. In the case

of hydraulic drives, the setpoint for the positioning valve is

specified via the analog output.

• Position control with pulse direction output for stepper drives

For each axis, the SIMOTION C240 Motion Controller provides

one pulse output for the position setpoint. Stepper drives

can either be operated without an encoder or be position-

controlled with an encoder.

• Position control with digital setpoint output

The PROFIBUS DP interface with PROFIdrive or the

PROFINET interface for the C240 PN is available for this pur-

pose. The actual position value is fetched over PROFIBUS DP

or PROFINET and the speed setpoint is output.

• Position control with mixed setpoint output

Analog, stepper and PROFIBUS drives can be used in a

mixed configuration on the SIMOTION C240 Motion Controller.

The channels of the 4 onboard interfaces can be used for

analog, stepper or hydraulic drives. PROFIBUS and

PROFINET drives can be operated as mixed configuration for

the C240 PN.

• Incremental position sensing (C240)

Incremental encoders supply counter pulses for the traversed

distance according to their resolution.

It is usually necessary to search for homing references.

The following can be used:

- Rotary encoders

- Linear encoders (length dimensions)

• Absolute position sensing (C240)

Absolute encoders with serial interface can be used

(SSI absolute encoders).

It is not necessary to search for homing references.

• Position control/position sensing over ADI 4 or IM 174

The ADI 4 (Analog Drive Interface for 4 Axes) or IM 174

(Interface Module for 4 Axes) module can be used to connect

drives with analog setpoint interfaces.

The IM 174 also supports the connection of stepper drives

with a pulse direction interface.

Both modules are connected over PROFIBUS DP.

The following can be connected to an ADI 4 or IM 174 module:

-4 drives

- 4 encoders

- Digital inputs and outputs

• Isochronous PROFIBUS encoder

■

Integration

Overview of connections for SIMOTION C

The maximum permissible cable lengths should be taken into

account when planning the cable layout.

Functional faults can occur when using longer cables.

The permissible length of PROFIBUS DP cables depends on the

configuration.

≤ 50 m

6FX.002-2CJ10-1..0

6FX.002-2CC11-...0

6FX.002-2CD01-1..0

6ES7901-4BD00-0XA0

6FX.002-2CD24-...0

6FX.002-2CD01-...0

6FX2002-3AD01-1..0

≤ 50 m

≤

25 m

PROFIBUS DP

SIMOTION C

Ethernet X7

≤ 3 m

6FX2002-3AE00-1..0

(C240 PN)

≤ 50 m (164 ft) at 500 Kbit/s

≤ 300 m (984 ft) at 125 Kbit/s

PROFIBUS cables

PROFINET cables

Ethernet bus cable

≤ 100 m (328 ft)

at 24 V DC

to X6

and X9

I/O

Encoders

Analog

setpoints

SSI absolute

encoder

6FX2001-5...

Linear scale

with EXE

Programming

device (PG)

PROFIBUS DP

node, e. g.

SINAMICS S120

PROFINET IO

station, e. g.

SINAMICS S120

Ethernet

bus node

Incremental

encoder (TTL)

RS 422 (24 V)

6FX2001-2...

Incremental

encoder (TTL)

RS 422 (5 V)

6FX2001-2...

Digital inputs/

outputs

SIMODRIVE 611

universal HR

4 setpoints

G_PM10_EN_00003d

≤ 35 m (115 ft)

at 5 V DC

≤ 35 m (115 ft)

Exposed core ends

Order No.

Pre-assembled cable

During mixed operation

with analog axes:

≤ 35 m (115 ft)

Power drive for 4

stepper motors

FM STEPDRIVE

(164 ft)

(82 ft)

(9.8 ft)

SIMODRIVE 611

universal HR with

incremental shaft

encoder interface

PROFINET IO

X11

Ports P1 to P3

(C240)

SIMOTION Motion Control System

SIMOTION C — Controller-based

SIMOTION C240/C240 PN Motion Controller

9/9

Siemens PM 21 · 2013

■

Technical specifications

PLC and motion control performance

Maximum number of axes 32

Minimum PROFIBUS cycle 1ms

Minimum PROFINET send cycle

(C240 PN only) 0.5 ms

Minimum servo/interpolator

clock cycle 0.5 ms

Memory

RAM (Random Access Memory) 50 MB

RAM disk (load memory) 29 MB

Retentive memory 107 KB

Persistent memory

(user data on MMC) 50 MB

Communication

Ethernet interfaces 1

PROFIBUS interfaces 2

PROFINET interfaces

(C240 PN only) • 1 interface with 3 ports

• Supports PROFINET IO

with IRT and RT

• Can be configured as

PROFINET IO controller

and/or device

General technical specifications

Supply voltage

• Rated value 24 V DC

• Permissible range 20.4 ... 28.8 V

Current consumption, typ. 1.2 A

Starting current, typ. 8.0 A

Power loss 15 W

Permissible ambient temperature

• Storage and transport -40 ... +70 °C (-40 ... +158 °F)

• Operation 0 ... 55 °C (32 ... 131 °F)

Permissible relative humidity

(without condensation) 5 ... 95 %

Atmospheric pressure 700 ... 1060 hPa

Degree of protection acc. to

EN 60529 (IEC 60529) IP20

Dimensions (W x H x D) 200 × 125 × 118 mm

(7.87 × 4.92 × 4.65 in)

Weight

• SIMOTION C2xx 1150 g (2.54 lb)

• Memory card 16 g (0.56 oz)

Relay outputs 5 (C240)

1 (C240 PN)

of which for

• Controller enable (C240 only) 4

• READY 1

Electrical data

• Max. operational voltage 50 V DC

• Max. switching current 1A

• Max. switching capacity 30 W

Operating cycles

•at 24V, 1A 3x10

Drive interfaces (C240 only) 4

Can be optionally used for analog,

stepper or hydraulic drives,

alternatively also as standard

analog outputs

When used as an analog output

• Voltage range ± 10.5 V

• Resolution 16 bit, including sign

• Galvanic isolation No

• Load impedance ≥3kOhm

• Max. cable length 35 m (114 ft)

When used as a pulse output for

stepper drives

• Output voltage for "1" signal,

IO = -20 mA 3.7 V

• Output voltage for "0" signal,

IO = 20 mA, max. 1V

• Load resistance, min. 55 Ω

• Max. cable length 50 m (164 ft)

• Max. pulse frequency 750 kHz

Integrated digital inputs 18

of which with special functions for:

• Measuring input (C240 only) 2

• BERO connection

(can also be used as measuring

input for C240,

can only be used as measuring

input for C240 PN)

(all inputs can be used as standard

inputs)

Input voltage

• Rated value 24 V DC

• For "1" signal 11 ... 30 V

• For "0" signal -3 ... +5 V

Galvanic isolation

• Inputs in groups of 18

Input current

• For signal "1", min. / typ. 6mA/8mA

Input delay

(at rated value of input voltage)

•0 → 1, typ./max. 6 µs/15 µs

•1 → 0, typ./max. 40 µs/150 µs

Connection of 2-wire BERO Yes

• Permitted quiescent current 2mA

Integrated digital outputs 8

• of which for fast output cam, max. 8

Rated load voltage 24 V DC

• Permissible range 20.4 ... 28.8 V

Output voltage

• For signal "1", max. L+

Galvanic isolation in groups of 8

SIMOTION Motion Control System

SIMOTION C — Controller-based

SIMOTION C240/C240 PN Motion Controller

9/10 Siemens PM 21 · 2013

■

Technical specifications (continued)

■

Selection and ordering data

Output current

• For signal "1", minimum current

per channel 5mA

• For signal "0", max. 0.5 mA

Residual current, max. 2mA

Derated loading

• at 40 °C (104 °F) 4A

• at 55 °C (131 °F) 2A

Switching frequency of the

outputs

• With resistive load 100 Hz

• With inductive load 2Hz

Lamp load 5W

Purge energy/channel 400 mJ (not simultaneous)

Typ. output delay 150 µs

Short-circuit protection Yes

Encoder inputs, max. (C240 only)

Optionally for incremental or

absolute encoder

Can be used alternatively as

up/down counter

Incremental encoder inputs

• Interface type (RS 422) 5V

• Encoder supply 5V/0.3A

• Galvanic isolation No

• Encoder frequency, max. 1MHz

• Max. cable length

-at 1MHz 10 m (32.81 ft)

- at 500 kHz and 300 mA 25 m (82.03 ft)

- at 500 kHz and 210 mA 35 m (114 ft)

Inputs, SSI absolute encoder

• Interface type (RS 422) 5 V synchronous serial,

single or multiturn

• Encoder supply 24 V/0.3 A

• Galvanic isolation No

• Transfer rate 187.5/375/750/1500 kbit/s

• Message length, max. 25 bit

• Max. cable length

- at 187.5 kbit/s 250 m (820 ft)

- at 1500 kbit/s 10 m (32.81 ft)

Monitoring

• Short-circuit of the sensor supply Yes

• Wire break Yes

Additional technical specifications

Real-time clock buffering

• Buffer time, typ. 4 weeks

• Charging time, typ. 1h

Approvals, according to cULus

Description Order No.

SIMOTION C240 Motion Controller

(SIMOTION V4.0 HF2 is required) 6AU1240-1AA00-0AA0

MultiAxes Bundle SIMOTION C240

Consists of 1 item each

• SIMOTION C240 Motion Controller

• Micro Memory Card (MMC) 64 MB

with MultiAxes Package license for

SIMOTION C

6AU1240-1AA00-0CA0

SIMOTION C240 PN Motion Controller

(≥ SIMOTION V4.1 SP2 HF 3/4)

6AU1240-1AB00-0AA0

MultiAxes Bundle SIMOTION C240 PN

Consists of 1 item each

• SIMOTION C240 PN Motion Controller

• Micro Memory Card (MMC) 64 MB

with MultiAxes Package license for

SIMOTION C

6AU1240-1AB00-0CA0

Micro Memory Card (MMC) 64 MB

for SIMOTION C240/C240 PN

Pre-installed license can be obtained

using additional order codes 1)

6AU1720-1KA00-0AA0

Micro Memory Card (MMC) 64 MB

for SIMOTION C240/C240 PN

with MultiAxes Package license

for SIMOTION C

6AU1720-1KA00-0AA0 -Z

M24

1) See Ordering of licenses for runtime software on page 9/63.

SIMOTION Motion Control System

SIMOTION C — Controller-based

SIMOTION C240/C240 PN Motion Controller

9/11

Siemens PM 21 · 2013

■

Accessories

■

More information

For more information about PROFIBUS DP, Industrial Ethernet

and PROFINET, please refer to Catalog IK PI and the Industry

Mall under Automation Technology/Industrial Communication.

SIZER for Siemens Drives engineering tool

With the SIZER for Siemens Drives engineering tool, you can

easily configure the SINAMICS S120 drive family including

SIMOTION. It provides you with support for selecting and dimen-

sioning the components for a Motion Control task. You can also

determine the possible number of axes and the resulting utiliza-

tion with SIZER for Siemens Drives in accordance with your

performance requirements.

For more information about SIZER for Siemens Drives, refer to

chapter System description – Dimensioning.

Description Order No.

Accessories for SIMOTION C240/C240 PN

Front connector, 40-pin

for connection of onboard I/Os

• With screw contacts 6ES7392-1AM00-0AA0

• With spring-loaded contacts 6ES7392-1BM01-0AA0

• With FastConnect fast connection

method 6ES7392-1CM00-0AA0

Connecting comb PS – C2xx

for PS307 power supply 6ES7390-7BA00-0AA0

IM 365 Interface Module

for expanding the Motion Controller with

max. 1 expansion unit, 2 modules with

permanent connecting cable

(1 m (3.28 ft))

• Standard temperature range 6ES7365-0BA01-0AA0

SIMATIC S7-300 mounting rail

• L = 160 mm (6.30 in) 6ES7390-1AB60-0AA0

• L = 480 mm (18.90 in) 6ES7390-1AE80-0AA0

• L = 530 mm (20.87 in) 6ES7390-1AF30-0AA0

• L = 830 mm (32.68 in) 6ES7390-1AJ30-0AA0

• L = 2000 mm (78.74 in) 6ES7390-1BC00-0AA0

Accessories for PROFINET

RJ45 FastConnect plug connector for

Industrial Ethernet/PROFINET

• 145° cable outlet

- 1 pack = 1 unit 6GK1901-1BB30-0AA0

- 1 pack = 10 units 6GK1901-1BB30-0AB0

FastConnect cables for Industrial

Ethernet/PROFINET 1)

• IE FC Standard Cable GP 2x2 6XV1840-2AH10

• IE FC Flexible Cable GP 2x2 6XV1870-2B

• IE FC Trailing Cable GP 2x2 6XV1870-2D

• IE FC Trailing Cable 2x2 6XV1840-3AH10

• IE FC Marine Cable 2x2 6XV1840-4AH10

Stripping tool for Industrial Ethernet/

PROFINET FastConnect cables

• IE FC stripping tool 6GK1901-1GA00

1) Sold by the meter; max. length 1000 m (3281 ft); minimum order 20 m (65.62 ft)

SIMOTION Motion Control System

SIMOTION P — PC-based

Overview of SIMOTION P

9/12 Siemens PM 21 · 2013

■

Overview

SIMOTION P – the PC-based variant

SIMOTION P is a PC-based, open Motion Control System which

is available in two variants:

• SIMOTION P320-3 for embedded PC solutions operating on

Windows Embedded Standard 2009

• SIMOTION P350-3 for high-performance applications

operating on Windows XP.

PLC, Motion Control, and HMI functions are executed together

with standard PC applications on one platform. Benefits to

the user: Using the PC platform and the Microsoft Windows

operating system, with a real-time expansion for SIMOTION – the

advantages of both worlds are combined in SIMOTION P:

Openness thanks to the Windows operating system

With SIMOTION P, you can enhance your machine's perfor-

mance using technology normally associated with the office

environment:

• Flexible networking

• High storage capacity for data

• Data backup concepts

• Integrated communication

Complex data evaluation, visualization tasks and even engineer-

ing can be easily implemented with SIMOTION P directly on the

PC. When HMI software from other engineering systems is

needed, the standardized OPC server interface can be used.

Functions such as remote maintenance, diagnostics and tele-

service can also be used via the integrated Ethernet interface.

The standard applications of the PC world are also available for

your motion applications for example:

• Hardware, such as a printer, keyboard, mouse

• Software, such as visualization software or Microsoft Office

programs.

Real-time capability thanks to the SIMOTION operating

system

The fully independent SIMOTION operating system runs parallel

with Windows on SIMOTION P. This real-time expansion makes

it possible to implement complex motion control applications

with high performance requirements on platforms of the

SIMOTION P range. A Windows "bluescreen" does not interrupt

the motion control application, as the real-time operating system

of SIMOTION P can continue running despite this type of error

condition.

Powerful PC technology

• The latest PC processor technology ensures optimum

performance.

• Fast instruction execution opens up completely new

application possibilities in the mid-performance to high-

performance range.

■

Benefits

7Open-loop control, motion control, technology, visualization

and standard Microsoft applications on the same platform –

ready to use without the need for time-consuming installation

7Performance gains due to the latest, powerful PC processor

architecture

7Easy configuration of HMI functions using WinCC flexible

7Openness to standard applications on the basis of the

Windows operating system

7Standard PC communication mechanisms can be used over

Industrial Ethernet

7Easy software updates

7User-friendly operation

7Flexible networking over the communication interfaces

provided. For example, PROFIBUS DP, PROFINET and

Industrial Ethernet available.

7Powerful thanks to a range of integrated functions

7Easy engineering for open-loop control and motion control

applications in the same program

■

Application

SIMOTION P320-3 is ideal for applications for which

• the available mounting space is minimal

• rugged hardware is extremely important, without rotating parts

such as fan or hard disk

• no display is needed in normal operation (headless mode).

Connections are available for operation of a monitor or display.

• Windows Embedded Standard is required as the operating

system.

SIMOTION P350-3 is ideal for high-performance applications

for which

• complex data management and data evaluation are required

• motion control, open-loop control and HMI functions need to

be implemented on one platform to save space

• highly dynamic position and pressure control loops are

needed for hydraulic applications

• the openness provided by the Windows operating system can

be optimally utilized (software, drivers, etc.)

Important applications include:

• Packaging machines

• Plastic and rubber processing machines

• Presses, wire-drawing machines

• Textile machines

• Printing machines

• Wood, glass, ceramics and stone working machines

• Production lines in the renewable energy sector, e.g. solar

technology, wind power installations.

Due to the increasing use of servo drives, these machines

require a high degree of integration of PLC, motion control and

technology functions.

SIMOTION Motion Control System

SIMOTION P — PC-based

Overview of SIMOTION P

9/13

Siemens PM 21 · 2013

■

Design

Typical design of an automation solution using SIMOTION P

Equipment provided on SIMOTION P basic units

The SIMOTION P320-3 and P350-3 Motion Controllers are

ready-to-run PC systems comprising:

• SIMOTION P320-3 or P350-3 hardware platform

• Windows operating system and real-time expansion for

SIMOTION P

• SIMOTION Kernel

• Communication interfaces for flexible networking, e.g.

PROFIBUS DP, PROFINET IO and Industrial Ethernet, de-

pending on the device and device variant.

Power supplies for SIMOTION P

SIMOTION P systems require a 24 V operating voltage. We

recommend that you use an uninterruptible power supply (UPS).

For the connection to a 120/230/400 V voltage source, you will

require one of the following power supplies, for example:

• SIMATIC PS 307 or

• SITOP power and DC-UPS module.

Operator control and monitoring

Displays and monitors can be directly connected to

SIMOTION P320-3 and SIMOTION P350-3 Motion Controllers by

means of the graphics interfaces featured on both types of

controller. With the Panel PC Remote Kit, it is possible to operate

SIMOTION P panel fronts at a distance of up to 30 m (98.4 ft)

from Motion Controllers. SIMATIC Flat Panels offer the additional

option of distributed configuration.

Engineering

Engineering is performed either using a separate programming

device or, in the case of SIMOTION P350-3, directly on the

SIMOTION P system.

Communication interfaces on SIMOTION P320-3

With its integrated PROFINET Communication Board with 3

ports, SIMOTION P320-3 can be connected to a PROFINET IO

network. The PROFINET board supports PROFINET IO with IRT

and RT. Standard Ethernet communication (TCP/IP) is also

possible over this interface.

Communication interfaces on SIMOTION P350-3

PROFIBUS version

The connection to a PROFIBUS network is made via the inte-

grated IsoPROFIBUS board. This is a PCI card with two ports for

PROFIBUS DP (max. 12 Mbit/s). Users can parameterize the

clock-pulse rate on the bus. Optionally, the user can define one

of the two PROFIBUS DP interfaces as programming interface

(MPI protocol).

If required, PROFINET can also be retrofitted to the PROFIBUS

version which will then support PROFIBUS and PROFINET

communication in the same device.

PROFINET version

The connection to a PROFINET network is made via the inte-

grated MCI-PN board. This Programming of motion PCI card

with four Ethernet ports and integrated switch functionality.

The PROFINET board supports PROFINET IO with IRT and RT.

Standard Ethernet communication (TCP/IP) is also possible over

this interface.

Integration in Local Area Networks

With the onboard Industrial Ethernet interface, the SIMOTION P

systems are prepared for integration in LANs (Local Area

Networks). An external operator station or an engineering

system can also be connected (e.g. for remote maintenance).

ET 200 ET 200

Engineering

SIMOTION P

SINAMICS S120 SINAMICS S120

PROFINET

Industrial Ethernet

G_PM10_EN_00024a

SIMOTION Motion Control System

SIMOTION P — PC-based

Overview of SIMOTION P

9/14 Siemens PM 21 · 2013

■

Design (continued)

Expansion using distributed I/Os

SIMOTION P320-3 and P350-3 Motion Controllers can control

(depending on device and device variant) drives and distributed

I/O modules over PROFIBUS DP or PROFINET. Suitable I/O

systems include, for example:

• SIMATIC ET 200S

• SIMATIC ET 200SP

• SIMATIC ET 200M

• SIMATIC ET 200pro

• SIMATIC ET 200eco, ET 200eco PN

The high-performance I/O systems transfer the required process

signals digitally and free of interference to the SIMOTION P

system.

High-speed I/Os for time-critical applications

Cycle times of 250 µs can be achieved with SIMOTION P,

PROFINET and the ET 200S distributed I/O system with interface

module IM 151-3 PN High Speed . This is particularly necessary

for applications with fast response times (e.g. hydraulic axes).

■

Function

System concept

The control and motion control software execute on the

SIMOTION Kernel basic system.

The internal PC communication provides high-performance data

exchange between the SIMOTION Kernel and the Microsoft

Windows operating system. Further processing of this data, e.g.

using OPC server, is possible in any Microsoft programs.

SIMOTION basic functionality

The SIMOTION P systems provide the following basic

functionality for a wide variety of automation requirements:

• SIMOTION runtime system

- User-programmable with several languages conforming

to IEC 61131

- Various methods of program execution (cyclic, sequential,

event-driven)

- PLC and arithmetic functionality

- Communication and management functions

- Technology functions for Motion Control Basic

• Testing and diagnostic tools

This basic functionality can be expanded with loadable

technology packages, if required.

SIMOTION technology packages

A special feature of SIMOTION is that the operating system

functionality can be expanded by loading technology packages,

such as:

• Motion Control with the functions

- POS – Positioning

- GEAR – Synchronous operation/electronic gear

-CAM – Cam

- PATH – Path interpolation

• TControl – Temperature controller

• MIIF – Multipurpose Information Interface

Since the technology functions have modular licenses, you only

pay for what you will actually use: "pay only for what you need"

Configuring/parameterizing/programming

SIMOTION SCOUT is a powerful and user-friendly engineering

tool. It is an integrated system for all engineering steps, from

configuring and parameterization, through programming, to

testing and diagnostics. Graphical operator prompting, using

dialog boxes and wizards, as well as text-based and graphical

languages for programming, considerably reduce the familiar-

ization and training periods.

Operator control and monitoring (HMI)

Operator control and monitoring can be performed

• separately on an HMI panel or

• directly on the SIMOTION P panel.

Communication utilities which support user-friendly data ex-

change with HMI systems are integrated in the basic functional-

ity of SIMOTION P. Both PROFIBUS/PROFINET and Industrial

Ethernet can be used for communication. The SIMOTION Kernel

processes the data exchange independently.

SIMATIC WinCC flexible is the standard HMI system for

SIMOTION P. This HMI system can directly configure the data

from a SIMOTION project. SIMOTION panel fronts can be used

for operation and visualization. SIMOTION P panel fronts are

connected directly via the LVDS interface in the case of

SIMOTION P350-3 and by means of the Panel PC Remote Kit in

the case of SIMOTION P320-3.

With the SIMATIC NET communication software, an open, stan-

dardized OPC interface is available for accessing SIMOTION

from other Windows-based HMI systems.

Process and data communication

Thanks to its integrated interfaces, SIMOTION P supports both

process and data communication. The SCOUT engineering sys-

tem is provided for user-friendly communication configuration

and diagnostics.

SIMOTION Motion Control System

SIMOTION P — PC-based

Overview of SIMOTION P

9/15

Siemens PM 21 · 2013

■

Function (continued)

Example: Closed-loop control of a hydraulic press with SIMOTION P350-3

Position-controlled motion control for servo drives

Drives with digital setpoint interface

SIMOTION P Motion Controllers enable position-controlled

motion control for drives with digital setpoint interfaces via

PROFIBUS DP (P350) or PROFINET IO with PROFIdrive.

Drives with analog setpoint interface (for retrofitting)

The ADI 4 (Analog Drive Interface for 4 Axes) or IM 174

(Interface Module for 4 Axes) module can be used to connect

drives with analog ± 10 V setpoint interface in the case of

SIMOTION P350-3.

The IM 174 Interface Module also supports the connection of

stepper drives with a pulse direction interface.

Both modules are connected over PROFIBUS DP.

The following can be connected to an ADI 4 or IM 174 module:

•4 drives

• 4 encoders

• Digital inputs and outputs.

Position control and pressure control for hydraulic drives

With SIMOTION P and the new SIMATIC ET 200S High Speed

I/O, cycle times down to 250 µs can be achieved over

PROFINET with IRT (Isochronous Real Time).

Highly dynamic control loops can therefore be achieved for

hydraulic applications with position and pressure control.

The necessary sensors and actuators, such as

• position encoders connected through the SSI interface,

• pressure sensors connected through analog inputs (AI),

• servo valves connected through analog outputs (AO) and

• digital I/O for tool safety and cam signal output

are connected over the SIMATIC ET 200S distributed I/O system,

which was equipped with the necessary high-speed I/O

modules beforehand to suit the application.

On the basis of PROFINET, it is therefore possible to synchronize

hydraulic drives as well as electrical drives. In conveyor systems

and press lines in the automotive industry, plant-wide automa-

tion solutions can be implemented in which both electrical drives

(winders, cross cutters, roller feeds) and hydraulic drives (e.g.

deep-drawing presses) are implemented.

ET 200S

High Speed

SIMOTION P

SCALANCE S

PROFINET

SSI AI AO

ET 200S

High Speed

Factory network

Hydraulic press

Control signal

(servo valve)

Pressure

Position

G_PM10_EN_00164

Plunger

Bed cushion

SIMOTION Motion Control System

SIMOTION P — PC-based

Overview of SIMOTION P

9/16 Siemens PM 21 · 2013

■

Function (continued)

Indication and diagnostics of operating status

A SIMOTION P system does not have any pushbuttons or

switches for changing operating modes (RUN/STOP). This task

is performed (when a monitor/display is connected) by a soft-

ware monitor (SIMOTION P State), which is operated using the

keyboard or mouse.

SIMOTION P State

This monitor shows the operating states during start-up and

operation. Other functions are, for example, loading (Restore)

and saving (Save) user programs or starting (Restart) or shutting

down (Terminate) the Motion Controller. During shutdown, impor-

tant data (retain data) are stored on the IsoPROFIBUS board or

MCI-PN PROFINET board (internally on SIMOTION P320-3)

while the device's power supply is shutting down so that the

most up-to-date data is ready for use as soon as the device is

restarted.

The SIMOTION P intelligent diagnostic system constantly

controls the functionality of the system and registers errors or

specific system events (e.g., timing errors, module or network

failures). In addition, PC-specific functions, such as fan speeds

or temperatures, are continuously controlled and alarms

generated in the case of failure on SIMOTION P350-3.

The stability of the SIMOTION Kernel is independent of the

Windows operating system. Even in the event of a Windows

operating system crash (Windows bluescreen), SIMOTION P

continues to run and the machine can be shut down safely

according to user specifications.

■

More information

• about suitable I/O modules for SIMOTION can be found in

chapter SIMOTION I/O components.

• about the functionality of SIMOTION platforms can be found in

section Overview of SIMOTION functions.

• about engineering and the SIMOTION runtime system can be

found in section SIMOTION software.

• about operator control and monitoring can be found in chapter

SIMOTION HMI devices.

• about SIMATIC NET communication software can be found in

section SIMOTION runtime software.

• about the SIMATIC Panel PC Remote Kit can be found in

section Supplementary components.

SIMOTION Motion Control System

SIMOTION P — PC-based

SIMOTION P320-3 Motion Controller

9/17

Siemens PM 21 · 2013

■

Overview

The SIMOTION P320-3 Motion Controller is a high-performance,

ultra compact and maintenance-free embedded industrial PC.

This product expands the PC-based hardware platform of the

SIMOTION range by an Embedded PC for motion control tasks.

The SIMOTION P320-3 hardware is based on the latest genera-

tion of the SIMATIC Microbox PC and therefore offers the follow-

ing benefits:

• High performance: Thanks to state-of-the-art Intel processor

technology

• Rugged: No rotating parts (no fan, no hard disk)

• Compact: With very small mounting dimensions

• Flexible in use: Thanks to a variety of installation methods.

In addition to the Windows Embedded Standard 2009 operating

system, the proven successful real-time expansion for

SIMOTION is also installed.

Flexible application in operation

SIMOTION P320-3 can be operated in a variety of different

modes:

• Headless mode:

SIMOTION P320-3 can be operated in so-called "headless"

mode: In other words, it can be operated without display,

monitor or panel front.

• Operation with display or monitor:

Standard SIMATIC displays or monitors can be connected

at a distance of up to 5 m (16.4 ft) via the integrated DVI

interface.

• Operation with SIMOTION P panel fronts:

The SIMATIC Panel PC Remote Kit can be used to connect

SIMOTION P320-3 to the panel fronts for SIMOTION P. The

panel fronts can be installed at a distance of up to 30 m

(98.4 ft) from SIMOTION P320-3.

PC-based CompactFlash card replaces hard disk

In order to enhance the rugged design of the system,

SIMOTION P320-3 contains no rotating parts at all. A PC-based

CompactFlash card is used instead of a hard disk. No tools are

needed to insert or remove this card.

Enhanced Write Filter (EWF) reduces write cycles

When a computer with Windows operating system is running,

large volumes of information are buffered on the hard disk or,

alternatively, on a CompactFlash memory. However, frequent

write cycles reduce the service life of the hard disk or

CompactFlash memory.

Using the Enhanced Write Filter avoids this problem. The data is

initially written to RAM. This ensures, for example, that changes

made at the commissioning stage do not take effect until they

are stored by command on the PC-based

CompactFlash card.

Changes made by mistake are not permanent. When the PC is

switched on again, it boots to the initial delivery state again until

changes have been stored on the CompactFlash card. The PC is

always restarted from the data stored on the PC-based

CompactFlash card.

The Enhanced Write Filter (EWF) is deactivated in the delivery

state.

High system availability

The following features of the SIMOTION P320-3 Motion Control-

ler afford an especially high degree of system availability:

• Integrated monitoring functions for battery, temperature and

program execution

• LEDs on front panel for efficient diagnosis

• Integrated power supply with bridging of supply failures

PC technology

• Processor: Intel Core 2 Solo, 1.2 GHz

• Operating system: Windows Embedded Standard 2009

• Memory: 2 GB DDR3 SDRAM

• 4 GB CompactFlash card

• Data backup/restore using the SIMATIC IPC Image & Partition

Creator data backup software (optional)

Series commissioning with optional USB Flash Drive

For the purpose of commissioning several Motion Controllers at

once, it is possible to copy a pregenerated data image to the

CompactFlash drive using SIMATIC IPC Image & Partition

Creator (own software).

The SIMATIC IPC Image & Partition Creator must either be

ordered separately, or is pre-installed on the SIMATIC IPC USB

Flash Drive (USB stick) (see selection and ordering data).

SIMOTION Motion Control System

SIMOTION P — PC-based

SIMOTION P320-3 Motion Controller

9/18 Siemens PM 21 · 2013

■

Design

Interfaces

Display and diagnostics

With SIMOTION P320-3, the display and diagnostics functions

for the operating states are performed by a software monitor,

which takes the form of an application window on a connected

screen. This software monitor can be operated using your key-

board, mouse or touch panel.

Integrated interfaces

• 1 x COM 1 (V.24)

•1 x DVI

• 4 x USB 2.0

• 1 x Industrial Ethernet (10/100/1000 Mbit/s)

• 1 x PROFINET IO (1 interface with 3 ports)

Operator control and monitoring

• SIMOTION P320-3 can be operated without display, monitor

or panel front ("headless" mode).

• Monitors and displays can be connected by means of the

integrated DVI interface.

• SIMOTION P panel fronts can be connected to

SIMOTION P320-3 by means of the SIMATIC Panel PC

Remote Kit.

Panel fronts for SIMOTION P

The following SIMOTION P panel fronts are available:

• 12" with membrane-type keys

• 12" for touch screen operation, and

• 15" for touch screen operation.

Communication via PROFINET

SIMOTION P320-3 can be linked to a PROFINET IO network

by means of the integrated PROFINET interface with 3 ports.

This means that in terms of PROFINET, SIMOTION P320-3 is a

PROFINET IO controller that offers the following functions:

• Communication as PROFINET-IO controller, I-Device

(controller and device simultaneously)

• 100 Mbit/s full duplex

• Supports real-time classes of PROFINET IO:

- RT (real-time)

- IRT (Isochronous Real Time)

• Integration of distributed I/O as PROFINET IO devices

• Integration of drives as PROFINET IO devices through

PROFIdrive according to the V4 specification

• Support for standard Ethernet communication, e.g.

- for interfacing with SIMOTION SCOUT

- for the connection of HMI systems

- for communication with any other devices over TCP/IP or

UDP communication

• Integrated 3-port switch with 3 RJ45 sockets. The optimum

topology (line, star, tree) can therefore be configured without

additional external switches.

SIMOTION IT service and diagnostic functions

SIMOTION IT provides SIMOTION P with an integrated Web

server on which, for example, user-specific Web pages can be

stored. Read and write access can be made to the Control Unit

variables. Java scripts or applets also allow the implementation

of active operation and display functions in the Web pages that

can be executed on a client PC with standard Internet browser.

Expansion with distributed I/O by means of PROFINET

The following distributed I/O can be added to the

SIMOTION P320-3 system by means of PROFINET:

• Distributed drives (e.g. SINAMICS S120)

• Distributed I/O (SIMATIC ET 200S/SP/M/pro/eco PN)

• Engineering systems (PG/PC) or

• HMI devices (e.g.: MP, TP, OP)

High-speed I/Os for time-critical applications

Cycle times of 250 µs can be achieved with SIMOTION P,

PROFINET and the ET 200S distributed I/O system with interface

module IM 151-3 PN High Speed . This is particularly necessary

for applications with fast response times (e.g. hydraulic axes).

Flexible mounting in the control cabinet

SIMOTION P320-3 can be mounted in a variety of positions in

the control cabinet, e.g. on a standard rail, cabinet wall or by

portrait assembly kit. This means that valuable space inside the

cabinet can be saved for other purposes.

Flexible mounting in the control cabinet: (1) Standard rail mounting,

(2) Wall mounting, (3) Portrait assembly, (4) Front portrait assembly

G_PM10_XX_00202

SIMOTION Motion Control System

SIMOTION P — PC-based

SIMOTION P320-3 Motion Controller

9/19

Siemens PM 21 · 2013

■

Integration

Overview of the SIMOTION P320-3 connections

■

Selection and ordering data

■

Accessories

■

Technical specifications

■

More information

SIZER for Siemens Drives engineering tool

With the SIZER for Siemens Drives engineering tool, you can

easily configure the SINAMICS S120 drive family including

SIMOTION. It provides you with support for selecting and dimen-

sioning the components for a Motion Control task. You can also

determine the possible number of axes and the resulting utiliza-

tion with SIZER for Siemens Drives in accordance with your

performance requirements.

For more information about SIZER for Siemens Drives, refer to

chapter System description – Dimensioning.

Description Order No.

SIMOTION P320-3 Motion Controller 1)

with Intel Core 2 Solo, 1.2 GHz,

Windows Embedded Standard 2009,

2 GB DDR3 SDRAM, 24 V DC,

incl. 4 GB CompactFlash card, front

portrait assembly and wall mounting kit,

with current runtime version (earlier

software versions are stored on the

recovery CD)

6AU1320-7AB55-3AF0

Description Order No.

SIMATIC IPC portrait assembly kit 6ES7648-1AA20-0YB0

SIMATIC IPC Image & Partition Creator

V3.2 6ES7648-6AA03-2YA0

SIMATIC IPC USB Flash Drive

8GB, USB 2.0

SIMATIC IPC Image & Partition Creator

software pre-installed

6AV7672-8JD01-0AA0

Touch pen

(for use with a touch-operated

panel front)

6AV7672-1JB00-0AA0

Spare parts

• Motherboard battery 6FC5247-0AA18-0AA0

SIMOTION

P320-3

Ethernet

SINAMICS S120

USB/RS 232

standard PC

interfaces

included in keyboard

package

PC standard

keyboard

Mouse

Ethernet bus cable

SITOP UPS

(optional)

PG, HMI

SIMATIC ET 200

e. g. ET 200S

PROFINET cable

X21

(ports 1...3)

G_PM10_EN_00198

1) Note about licenses for runtime software:

Licenses for runtime software for SIMOTION P320-3 can be ordered

individually or by means of order code (Z option).

See Ordering of licenses for runtime software on page 9/63.

PLC and motion control performance

Maximum number of axes 64

Minimum PROFINET transmission

cycle 250 µs

Minimum servo/interpolator

clock cycle 250 µs

Memory

RAM (Random Access Memory) 2 GB DDR3 SDRAM

Retentive memory 15 KB (256 KB with UPS)

CompactFlash card 4GB

Persistent memory

(user data on CF) 64 MB

Communication

USB interfaces 4 x USB 2.0

Ethernet interfaces 1

PROFINET interfaces • 1 interface with 3 ports

• Supports PROFINET IO

with IRT and RT

• Can be configured as

PROFINET IO controller

and/or device

General technical specifications

Input voltage 24 V DC

Power consumption, max. 72 W

Mains buffering, max. 5ms

Degree of protection acc. to

EN 60529 (IEC 60529) IP20

Temperature change, max. 10°K/h

Limit values for rel. humidity in

accordance with EN 60068-2-78,

EN 60068-2-30

• Storage and transport 5 ... 95 % at 25 °C (77 °F)

• Operation 5 ... 80 % at 25 °C (77 °F)

Permissible ambient temperature

• Storage and transport -20 ... +60 °C (-4 ... +140 °F)

• Operation

- Portrait assembly, front and

wall mounting 0 ... 45 °C (32 ... 113 °F)

- Standard rail mounting 0 ... 55 °C (32 ... 131 °F)

Weight, approx. 2 kg (4.41 lb)

Dimensions (W x H x D) 262x142x47 mm

(10.31x5.59x1.85in)

Approvals, according to UL/CSA

SIMOTION Motion Control System

SIMOTION P — PC-based

SIMOTION P350-3 Motion Controller

9/20 Siemens PM 21 · 2013

■

Overview

The SIMOTION P350-3 Motion Controller is a PC-based, open

Motion Control System. The use of an industrial PC platform

facilitates the running of the SIMOTION machine application

comprising of PLC, motion control and HMI functions alongside

standard PC applications in one platform. This is particularly

useful in the case of applications that involve complex PC-based

data management and sophisticated analysis systems.

The operating system is Windows XP Professional, with a real-

time expansion for SIMOTION.

To facilitate the connection of distributed components,

SIMOTION P350-3 is available in both PROFINET and

PROFIBUS versions. A PROFINET Communication Board can be

retrofitted to the PROFIBUS version for applications which

require both PROFIBUS and PROFINET.

■

Design

Interfaces

Display and diagnostics

With SIMOTION P, the display and diagnostics functions for the

operating states are performed by a software monitor, which

takes the form of an on-screen application window. This software

monitor can be operated using your keyboard, mouse or touch

panel.

Integrated interfaces

• 1 x COM 1 (V.24), VGA (via DVI adapter)

•4 x USB 2.0

• 2 x Industrial Ethernet 10/100 Mbits (integrated)

• PROFIBUS version:

2 x PROFIBUS DP (not isochronous, isolated), one of the

interfaces can be used as an MPI interface

• PROFINET version:

1 x PROFINET interface with 4 ports, supports PROFINET IO

with IRT and RT

Expansion slots

• 1 x PCI slot 265 mm (10.43 in)

- PROFIBUS version: occupied by IsoPROFIBUS board

- PROFINET version: occupied by MCI-PN Communication

Board

• 1 x PCI/ISA slot 170 mm (6.69 in) (free)

e.g., for the purpose of retrofitting an additional Communica-

tion Board (simultaneous communication via PROFIBUS and

PROFINET)

Communication via PROFIBUS

The PROFIBUS version features an integrated IsoPROFIBUS

board, which offers two PROFIBUS DP interfaces with

PROFIdrive.

The free PCI slot can be used for the purpose of retrofitting an

optional MCI-PN Communication Board. This means that the

PROFIBUS version can support both PROFIBUS and PROFINET

on the same PC.

Communication via PROFINET

The MCI-PN Communication Board that has been integrated in

the PROFINET version enables the SIMOTION P350-3 to be

connected to a PROFINET IO network. From a PROFINET

perspective, the SIMOTION P350-3 thus assumes the role of a

PROFINET IO controller.

To enable it to communicate with other PROFINET controllers,

the SIMOTION P350-3 can be configured as both a PROFINET

controller and a PROFINET device at the same time (I-Device).

Operator control and monitoring

SIMOTION P350-3 can be operated in a variety of different

modes:

• Headless mode:

It can be operated without display, monitor or panel front.

• Operation with display or monitor:

Standard SIMATIC displays or monitors can be connected at

a distance of up to 5 m (16.4 ft) via the integrated DVI or VGA

interface.

• Operation with SIMOTION P panel fronts:

SIMOTION P350-3 can be directly connected to the panel

fronts for SIMOTION P via the internal LVDS interface. In this

case, SIMOTION P350-3 and the panel front are operated as

a single unit. The SIMATIC Panel PC Remote Kit allows

SIMOTION P350-3 and the panel front to be operated at

separate locations. The kit is capable of bridging a distance

of up to 30 m (98.4 ft).

SIMOTION IT service and diagnostic functions

SIMOTION IT provides SIMOTION P with an integrated Web

server on which, for example, user-specific Web pages can be

stored. Read and write access can be made to the Control Unit

variables. Java scripts or applets also allow the implementation

of active operation and display functions in the Web pages that

can be executed on a client PC with standard Internet browser.

Panel fronts for SIMOTION P

Various panel fronts are available for the SIMOTION P

Motion Controller:

• 12" with membrane-type keys

• 12" for touch screen operation, and

• 15" for touch screen operation

SIMOTION Motion Control System

SIMOTION P — PC-based

SIMOTION P350-3 Motion Controller

9/21

Siemens PM 21 · 2013

■

Design (continued)

Expansion using distributed I/Os

PROFINET version

• Distributed I/Os (SIMATIC ET 200S/SP/M/pro/eco PN)

• Distributed drives (e.g. SINAMICS S120)

• Engineering systems (PG/PC) or

• HMI devices (e.g.: MP, TP, OP)

PROFIBUS version

• Certified PROFIBUS standard slaves (DP-V0, DP-V1, DP-V2)

• Distributed I/Os (SIMATIC ET 200S/M/eco/pro)

• Distributed drives (e.g.: SINAMICS S120)

• Engineering systems (PG/PC) or

• HMI devices (e.g.: MP, TP, OP)

High-speed I/Os for time-critical applications

Cycle times of 250 µs can be achieved with SIMOTION P,

PROFINET and the ET 200S distributed I/O system with interface

module IM 151-3 PN High Speed. This is particularly necessary

for applications with fast response times (e.g. hydraulic axes).

PC technology

• Processor: Intel Pentium M 2 GHz

• Operating system: Windows XP Professional, English

• Memory: 512 MB SDRAM, upgradable to 2 GB

• Hard disk with shock damping, approx. 40 GB

• DVD-ROM drive (optional)

• Data backup/restore using the Symantec Ghost data backup

software (pre-installed)

■

More information

• about connectable I/O modules for SIMOTION can be found

in chapter SIMOTION I/O components and section

Overview of SIMOTION functions.

• about the connection of panel fronts for SIMOTION P can be

found in section Panel fronts for SIMOTION P.

SIZER for Siemens Drives engineering tool

With the SIZER for Siemens Drives engineering tool, you can

easily configure the SINAMICS S120 drive family including

SIMOTION. It provides you with support for selecting and dimen-

sioning the components for a Motion Control task. You can also

determine the possible number of axes and the resulting utiliza-

tion with SIZER for Siemens Drives in accordance with your

performance requirements.

For more information about SIZER for Siemens Drives, refer to

chapter System description – Dimensioning.

■

Integration

Overview of the SIMOTION P350-3 connections

SIMOTION

P350-3

X102

X101

Ethernet

PROFIBUS DP

SINAMICS S120

USB/RS 232

standard PC

interfaces

PROFIBUS DP

included in

keyboard package

PROFIBUS cable

G_PM10_EN_00023c

Mouse

Standard PC

keyboard

Programming

device PG

SIMATIC ET 200

e. g. ET 200M

SIMATIC ET 200

e. g. ET 200M

PROFIBUS DP

drive e. g.

SINAMICS S120

SITOP UPS

(optional)

PROFIBUS DP

drive e. g.

SINAMICS S120

Ethernet bus cable

Iso

PROFIBUS

board

PG, HMI

SIMATIC ET 200

e. g. ET 200S

PROFINET cable

MCI-PN Board

X21

(ports 1...4)

(PROFINET

version)

(PROFIBUS

version)

PCI slot

SIMOTION Motion Control System

SIMOTION P — PC-based

SIMOTION P350-3 Motion Controller

9/22 Siemens PM 21 · 2013

■

Technical specifications

■

Selection and ordering data

■

Accessories

PLC and motion control performance

Number of axes Up to 64 depending on the

set clock-pulse rate

Minimum PROFIBUS cycle 1 ms (PROFIBUS version)

Minimum PROFINET transmission

cycle 0.25 ms (PROFINET version)

Minimum servo/interpolator

clock cycle 0.25 ms

Memory

RAM (Random Access Memory) 512 MB SDRAM,

upgradable to 2 GB

Retentive memory 15 KB

Persistent memory 64 MB/256 MB

when a UPS is used

Communication

USB interfaces 4 x USB 2.0

Ethernet interfaces 2 x 10/100 Mbit/s

PROFIBUS interfaces PROFIBUS version:

• 2 interfaces, of which one can

be used as an MPI interface

• Not isochronous, isolated

PROFINET interfaces PROFINET version:

• 1 interface with 4 ports

• Supports PROFINET IO

with IRT and RT

• Can be configured as

PROFINET IO controller

and/or device

General technical specifications

Input voltage 24 V DC

Power consumption, max. 190 W

Mains buffering, max. 20 ms

Degree of protection acc. to

EN 60529 (IEC 60529) IP20

Temperature change, max. 10°K/h

Relative humidity limit values in

accordance with IEC 68-2-3,

IEC 68-2-30, IEC 68-2-56

• Storage and transport 5 ... 95 % at 25 °C (77 °F)

• Operation 5 ... 80 % at 25 °C (77 °F)

Humidity rating based on

EN 60721-3-3 Class 3K5

Condensation and icing

excluded

Low air temperature 0 °C (32 °F)

Permissible ambient temperature

• Storage and transport -20 ... +60 °C (-4 ... +140 °F)

• Operation 5 ... 45 °C (41 ... 113 °F)

Weight, approx. 6 kg (13.2 lb)

Dimensions (W x H x D) 297x267x85mm

(11.69 x 10.51 x 3.35 in)

(excluding DVD drive)

297x267x106 mm

(11.69 x 10.51 x 4.17 in)

(including DVD drive)

Approvals, according to cULus, C-Tick

Description Order No.

SIMOTION P350-3, PROFIBUS version

with Intel Pentium M, 2 GHz,

Windows XP Professional, English,

512 MB SDRAM, 24 V DC,

with IsoPROFIBUS board

• Without DVD drive 6AU1350-3AK41-1BE2 -Z 1)

• With DVD drive 6AU1350-3AK43-1BE2 -Z 1)

SIMOTION P350-3, PROFINET version

with Intel Pentium M, 2 GHz,

Windows XP Professional, English,

512 MB SDRAM, 24 V DC,

with MCI-PN board

• Without DVD drive 6AU1350-3AK41-2BE2 -Z 1)

• With DVD drive 6AU1350-3AK43-2BE2 -Z 1)

Order code

HMI Bundle

SIMOTION P350-3 can be ordered

together with the HMI software WinCC

flexible for a bundle price.

The following is also included in the

scope of supply:

WinCC flexible 2008 Runtime,

2048 Powertags

WinCC flexible Runtime,

2048 Powertags,

WinCC flexible/Archives + Recipes

A03

Example for ordering

SIMOTION P350-3, PROFIBUS version,

without DVD drive, with HMI Bundle:

6AU1350-3AK41-1BE2 -Z V41 W05 A03

Description Order No.

Memory expansion

• 512 MB DDR2 533 SODIMM 6ES7648-2AG30-0GA0

• 1 GB DDR2 533 SODIMM 6ES7648-2AG40-0GA0

MCI PN Communication Board

(for PROFINET upgrade) 6AU1390-0BA00-0AA0

Replacement parts

• Motherboard battery 6FC5247-0AA18-0AA0

Hard disk

• Hard disk 3.5" SATA On request

1) Note about runtime software:

When ordering SIMOTION P 350-3, the pre-installed runtime version

must be specified. The software version is ordered with the order code

(Z option) "V" and the service pack with the order code "W". If no options

are specified, it will be supplied with the current software version.

Example:

When 6AU1350-3AK41-1BE2 -Z V41 W05 is specified, SIMOTION P350-3

with the above order number and runtime version V4.1 SP5 is supplied.

"W00" must be specified to order earlier runtime versions without service

pack (V4.0).

Other licenses for runtime software can be ordered individually or by

means of order code (Z option).

See Ordering of licenses for runtime software on page 9/63.

SIMOTION Motion Control System

SIMOTION P — PC-based

Panel fronts for SIMOTION P

9/23

Siemens PM 21 · 2013

■

Overview

Three different panel fronts with TFT color display are available

for the SIMOTION P Motion Controller:

• 12" with membrane-type keys, resolution: 800 x 600 pixels

• 12" for touch screen operation, resolution: 800 x 600 pixels,

and

• 15" for touch screen operation, resolution: 1024 x 768 pixels

The panel fronts are suitable for installation in consoles, control

cabinets and support arm systems.

Connection to SIMOTION P320-3

SIMOTION P320-3 is connected to the panel fronts for

SIMOTION P by means of the SIMATIC Panel PC Remote Kit.

The panel front can be installed at a distance of up to

30 m (98.4 ft) from the Motion Controller.

Connection to SIMOTION P350-3

SIMOTION P350-3 can be directly connected to the panel fronts

for SIMOTION P via the internal LVDS interface. The standard

method of installing the Motion Controller is to mount it directly

behind the panel front. Four knurled-head screws are used to

form a mechanical interlock between the SIMOTION P350-3 and

the panel front. No special tool is needed for this.

The Panel PC Remote Kit also allows SIMOTION P350-3 and the

panel front to be operated at separate locations. In this case, a

distance of up to 30 m (98.4 ft) can also be bridged.

■

Technical specifications

■

Selection and ordering data

■

Accessories

Panel fronts for SIMOTION P

Degree of protection at the front

according to EN 60529 (IEC 60529) IP65

Relative humidity limit values in

accordance with IEC 68-2-3,

IEC 68-2-30, IEC 68-2-56

• Storage and transport 5 ... 95 % at 25 °C (77 °F)

• Operation 5 ... 80 % at 25 °C (77 °F)

Condensation Not permissible

Permissible ambient temperature

• Storage and transport -20 ... +60 °C (-4 ... +140 °F)

• Operation 5 ... 45 °C (41 ... 113 °F)

Weight

• 12" P012K panel front, membrane keys 6 kg (13.2 lb)

• 12" P012T panel front, touch screen

operation 6 kg (13.2 lb)

• 15" P015T panel front, touch screen

operation 6 kg (13.2 lb)

Dimensions (W x H x D)

• 12" P012K panel front, membrane keys 483 x 310 x 100 mm

(19.02 x 12.2 x 3.94 in)

• 12" P012T panel front, touch screen

operation 400 x 310 x 125 mm

(15.75 x 12.2 x 4.92 in)

• 15" P015T panel front, touch screen

operation 483 x 310 x 130 mm

(19.02 x 12.2 x 5.12 in)

Approvals, according to cULus

Description Order No.

12" P012K panel front,

membrane keys 6AU1300-0DB00-0AA0

12" P012T panel front,

touch screen operation 6AU1300-0CB00-0AA0

15" P015T panel front,

touch screen operation 6AU1300-0EB00-0AA0

Description Order No.

Key labeling strips

For labeling softkeys and function keys,

blank, plastic, supplied in sets of 3

6AV7671-3CA00-0AA0

SIMOTION Motion Control System

SIMOTION P — PC-based

Supplementary components

SIMATIC Panel PC Remote Kit

9/24 Siemens PM 21 · 2013

■

Overview

The SIMATIC Panel PC Remote Kit allows the computer and

operating unit to be installed at a distance from one another.

It is designed for use with SIMOTION P320-3 and

SIMOTION P350-3 Motion Controllers. It can bridge a distance

of up to 30 m (98.4 ft) between the computer/Motion Controller

and the operating unit.

The Remote Kit must always be operated with the cables

supplied with the unit.

■

Benefits

7Operating unit can be located up to 30 m (98.4 ft) from the

computer

7Suitable for retrospective conversion/upgrade

7Allows the use of ultra compact operating units

7Pure hardware solution and therefore operating-system-

neutral

7Remotely installed front with AC or DC power supply

72 additional USB interfaces, on the rear, USB 2.0:

High speed up to 5 m (16.4 ft), full speed up to 30 m (98.4 ft)

■

Technical specifications

■

Design

The Remote Kit consists of the following components:

• Remote module (mounted on the rear of the operating unit)

• Video connecting cable (industrial-grade DVI-D cable)

• USB connecting cable (standard USB cable for a distance up

to 5 m (16.4 ft), the USB signal is externally amplified and

transferred via a CAT6 cable for distances over 5 m (16.4 ft))

• Mechanical assembly kit (for mounting the computer unit in

the control cabinet, console or machine)

■

Selection and ordering data

■

Accessories

SIMATIC Panel PC Remote Kit

Supported operating units • All panel fronts for SIMOTION P

Front functionality Same as for central mounting,

but with following limits with

respect to USB functions:

• Distance > 5 m (16.4 ft) :

USB 1.1, and only one external

1.1 hub

External interfaces 2 additional USB interfaces on

the remote module on the rear of

the remote operating unit

Power supply 24 V DC or 110 … 240 V AC,

50/60 Hz

Certifications and approvals CE, cULus (UL 508)

Scope of supply Remote module, cable set,

assembly materials, Europe

power cable (for the AC option)

Description Order No.

SIMATIC Panel PC Remote Kits

• With cable set 5 m (16.4 ft), 24 V DC 6AV7671-1EA00-5AA1

• With cable set 10 m (32.8 ft), 24 V DC 6AV7671-1EA01-0AA1

• With cable set 15 m (49.2 ft), 24 V DC 6AV7671-1EA01-5AA1

• With cable set 20 m (65.6 ft), 24 V DC 6AV7671-1EA02-0AA1

• With cable set 30 m (98.4 ft), 24 V DC 6AV7671-1EA03-0AA1

• With cable set 5 m (16.4 ft),

100/240 V AC 6AV7671-1EA10-5AA1

• With cable set 10 m (32.8 ft),

100/240 V AC 6AV7671-1EA11-0AA1

• With cable set 15 m (49.2 ft),

100/240 V AC 6AV7671-1EA11-5AA1

• With cable set 20 m (65.6 ft),

100/240 V AC 6AV7671-1EA12-0AA1

• With cable set 30 m (98.4 ft),

100/240 V AC 6AV7671-1EA13-0AA1

Description Order No.

Power cable

• Europe: D/F/NL/E/B/A/S/FIN 1) 6ES7900-1AA00-0XA0

• United Kingdom 6ES7900-1BA00-0XA0

• Switzerland 6ES7900-1CA00-0XA0

•USA 6ES7900-1DA00-0XA0

• Italy 6ES7900-1EA00-0XA0

• China 6ES7900-1FA00-0XA0

Components of the Remote Kit

(available individually only as spare part)

• Remote module 24 V DC with

mounting material 6AV7671-1EX01-0AD0

• Remote module 110 … 240 V AC with

mounting material 6AV7671-1EX01-0BD0

• USB amplifier/CAT6 converter 6AV7671-1EX02-0AA0

• Cable set 5 m (16.4 ft) (DVI,

USB standard cable) 6AV7671-1EX10-5AA0

• Cable set 10 m (32.8 ft) (DVI,

Cat6 cable) 6AV7671-1EX11-0AA0

• Cable set 15 m (49.2 ft) (DVI,

Cat6 cable) 6AV7671-1EX11-5AA0

• Cable set 20 m (65.6 ft) (DVI,

Cat6 cable) 6AV7671-1EX12-0AA0

• Cable set 30 m (98.4 ft) (DVI,

Cat6 cable) 6AV7671-1EX13-0AA0

1) A Europe power cable is included in the scope of supply for AC variants

(100 … 240 V) of the Remote Kit.

SIMOTION Motion Control System

SIMOTION P — PC-based

Supplementary components

KBPC CG US standard PC keyboard

9/25

Siemens PM 21 · 2013

■

Overview

Programs and texts can be edited easily with the compact

KBPC CG US standard PC keyboard.

The standard PC keyboard is not suitable for industrial use

(EMC) and should not be used as a permanent installation.

It may be used only for servicing and commissioning.

■

Integration

The KBPC CG US standard PC keyboard can be used for:

• SINUMERIK 840D with PCU 50.3

• SINUMERIK 840Di sl

• SINUMERIK 840D sl with PCU 50.3

• SINUMERIK 840D sl Type 1B with PCU 50.5

•SIMOTION P3x0

The standard PC keyboard cannot be used in conjunction with

the full CNC keyboard.

■

Technical specifications

■

Selection and ordering data

6FC5203-0AC01-3AA0

SINUMERIK KBPC CG US

standard PC keyboard

Input voltage 5.25 V DC

Power consumption, max. 0.1 W

Degree of protection according to

EN 60529 (IEC 60529) IP20

Humidity rating based on

EN 60721-3-3 Class 3K5 condensation

and icing excluded.

Low air temperature

0 °C (32 °F).

Ambient temperature

•Storage -20…+60°C

(-4 … +140 °F)

•Transport -20…+60°C

(-4 … +140 °F)

• Operation 0 … 50 °C

(32…122°F)

Dimensions

• Width 405 mm (15.95 in)

•Height 44 mm (1.73 in)

•Depth 180 mm (7.09 in)

Weight, approx. 1.3 kg (2.87 lb)

Approvals, according to FCC, GS, CE, C-Tick,

cURus

Description Order No.

SINUMERIK KBPC CG US standard

PC keyboard

MF-II compatible, 104 key layout,

connection: USB, incl. connecting cable,

length: 1.7 m (5.58 ft)

6FC5203-0AC01-3AA0

SIMOTION Motion Control System

SIMOTION P — PC-based

Supplementary components

MCI-PN Communication Board

9/26 Siemens PM 21 · 2013

■

Overview

The MCI-PN Communication Board for SIMOTION P350-3

enables connection to a PROFINET IO network. This means that

in terms of PROFINET, SIMOTION P350-3 is a PROFINET IO

controller that offers the following functions:

• Communication as: PROFINET IO Controller, I-Device

(controller and device simultaneously)

• 100 Mbit/s full duplex

• Supports real-time classes of PROFINET IO:

- RT (Real Time)

- IRT (Isochronous Real Time)

• Integration of distributed I/O as PROFINET IO devices

• Integration of drives as PROFINET IO devices through

PROFIdrive according to the V4 specification

• Support for standard Ethernet communication, e.g.

- for interfacing with SIMOTION SCOUT

- for the connection of HMI systems

- for communication with any other devices over TCP/IP or

UDP communication

• Integrated 4-port switch with 4 RJ45 sockets. The optimal

topology (line, star, tree or ring) can therefore be constructed

without the need for additional external switches.

■

Integration

The MCI-PN Communication Board is inserted in the free

PCI slot of the SIMOTION P350-3 Motion Controller.

■

Technical specifications

■

Selection and ordering data

■

Accessories

■

More information

More information about cables for Ethernet/PROFINET can

be found in Catalog IK PI (Industrial Communication) and the

Industry Mall under Automation Technology/Industrial

Communication/PROFINET/Network components.

MCI-PN Communication Board

Current consumption 900 mA at 5 V

Permissible ambient temperature

• Storage and transport -20 ... +60 °C

(-4 ... +140 °F)

• Operation 5 ... 55 °C

(41 ... 131 °F)

Weight, approx. 110 g (0.24 lb)

Dimensions (W X H) 107x167mm

(4.21 x 6.57 in)

Approvals, according to cULus

Description Order No.

MCI-PN Communication Board 6AU1390-0BA00-0AA0

Description Order No.

RJ45 FastConnect plug connector for

Industrial Ethernet/PROFINET

• 145° cable outlet

- 1 pack = 1 unit 6GK1901-1BB30-0AA0

- 1 pack = 10 units 6GK1901-1BB30-0AB0

• 180° cable outlet

- 1 pack = 1 unit 6GK1901-1BB10-2AA0

- 1 pack = 10 units 6GK1901-1BB10-2AB0

FastConnect cables for

Industrial Ethernet/PROFINET 1)

• IE FC Standard Cable GP 2x2 6XV1840-2AH10

• IE FC Flexible Cable GP 2x2 6XV1870-2B

• IE FC Trailing Cable GP 2x2 6XV1870-2D

• IE FC Trailing Cable 2x2 6XV1840-3AH10

• IE FC Marine Cable 2x2 6XV1840-4AH10

Stripping tool for

Industrial Ethernet/PROFINET

FastConnect cables

• IE FC stripping tool 6GK1901-1GA00

1) Sold by the meter; max. length 1000 m (3281 ft);

minimum order 20 m (65.62 ft).

SIMOTION Motion Control System

SIMOTION D — Drive-based

Overview of SIMOTION D

9/27

Siemens PM 21 · 2013

■

Overview

SIMOTION D Control Units: D410-2, D4x5-2 (4 performance classes)

SIMOTION D is the compact, drive-based version of SIMOTION

based on the SINAMICS S120 drives family.

The SIMOTION D Control Units are available in the following

variants:

• SIMOTION D410-2 are compact Control Units for single-axis

applications with multi-axis option. The Control Units are avail-

able in variants D410-2 DP and D410-2 DP/PN and are

snapped onto the SINAMICS S120 PM340 Power Modules in

blocksize format.

• SIMOTION D4x5-2 are Control Units for multi-axis applications

in the SINAMICS S120 booksize format and are available in

the following performance variants:

- SIMOTION D425-2 DP and D425-2 DP/PN Control Units

(BASIC Performance) for up to 16 axes

- SIMOTION D435-2 DP and D435-2 DP/PN Control Units

(STANDARD Performance) for up to 32 axes

- SIMOTION D445-2 DP/PN (HIGH Performance) Control Unit

for up to 64 axes

- SIMOTION D455-2 DP/PN Control Unit (ULTRA-HIGH Perfor-

mance) for up to 128 axes or applications with very short

control cycle clocks

This fine scalability ensures a quick response to changing re-

quirements in automation without having to change the system.

Device concept

With SIMOTION D, the PLC and motion control functionalities as

well as the SINAMICS S120 drive software run on a shared con-

trol hardware. The IEC 61131-3-compliant PLC integrated in

SIMOTION D means that the system is not just capable of con-

trolling motion sequences, but that the entire machine can also

be controlled with a single compact unit.

Depending on the SIMOTION D platform, HMI devices can be

operated on the onboard PROFIBUS, Ethernet or PROFINET

interface for operator control and monitoring. Functions such as

remote maintenance, diagnostics and teleservice can also be

used via these interfaces.

■

Benefits

7Cost-effective thanks to the integration of PLC, motion control

and technology functions direct in the drive

7Employs the innovative SINAMICS S120 design

7Compact form-factor reduces control cabinet size

7Ideally suited to modular and distributed machine concepts

7User-friendly operation

7Variable networking via a wide range of communication

interfaces:

- D410-2 DP, D4x5-2 DP: Industrial Ethernet and

PROFIBUS DP onboard

- D410-2 DP/PN, D4x5-2 DP/PN: Industrial Ethernet,

PROFIBUS DP and PROFINET IO onboard

7Powerful thanks to a range of technology functions

7Very simple engineering, from drive commissioning to

open-loop control and Motion Control applications

7Easy to service thanks to the CompactFlash card, which can

be easily replaced and contains all data (programs, data,

drive parameters, and licenses)

7Very dynamic because the interfaces between PLC and

Motion Control are no longer required

■

Application

SIMOTION D can be used optimally wherever

• the SINAMICS S120 drive family is used

• the motion control and PLC functionality are directly executed

in the drive (SINAMICS S120)

• compact, space-saving construction is required

• high performance is required for motion control and high-

speed I/O

• high electromagnetic compatibility and a high resistance to

shock and vibration are required due to harsh ambient

conditions

• modular machine concepts with high-speed isochronous

coupling is required

The flexible solution for modular machine concepts

SIMOTION D optimally supports the implementation of modular

machine concepts in which single-axis drives and high-perfor-

mance multi-axis drives have to be combined:

• SIMOTION D410-2 (blocksize format) is the most cost-effec-

tive solution for the design of compact drives, ranging from

single units to small-scale multi-axis solutions with typically

2 to 3 axes.

• SIMOTION D4x5-2 (booksize format) performs the open-loop

and closed-loop control functions for multi-axis groups with up

to 128 axes.

Important applications include:

• Packaging machines

• Plastic and rubber processing machines

• Presses, wire-drawing machines

• Textile machines

• Printing machines

• Wood, glass, ceramics and stone working machines

•Converting

• Handling devices

Due to the increasing use of servo and vector drives, these

machines require a high degree of integration of PLC, motion

control and technology functions.

SIMOTION Motion Control System

SIMOTION D — Drive-based

Overview of SIMOTION D

9/28 Siemens PM 21 · 2013

■

Design

Typical design of an automation solution using SIMOTION D

SIMOTION D components and interfaces

• Various status/error displays

• Onboard digital inputs and outputs

• Option slot (receptacle, only for D4x5-2), e.g. for expansion

with additional I/Os with the TB30 Terminal Board

• Integrated communications interfaces for linking:

- SINAMICS S120 drive modules

- Distributed I/Os

- HMI systems

-PG/PC

- Other motion control and automation systems

- Other SINAMICS S110/S120 drives with digital setpoint

interface

• Slot for CompactFlash card for data backup

Construction of a single axis with SIMOTION D410-2

The following components make up a SIMOTION D410-2 single

axis system:

• A SIMOTION D410-2 Control Unit, designed for open and

closed-loop control of a single drive

• A SINAMICS S120 PM340 Power Module, blocksize format

(combined infeed and power module)

• Other drive components, such as

- Power supply

- Filter

- Choke, etc.

The connection between SIMOTION D410-2 and the

SINAMICS S120 PM340 Power Module is made via the inte-

grated PM-IF interface or, when the CUA31/CUA32 Control Unit

Adapter is used, via DRIVE-CLiQ.

Structure of an axis grouping with SIMOTION D410-2

In order to create a multi-axis grouping with SIMOTION D410-2,

additional SINAMICS S110/S120 Control Units are connected to

the SIMOTION D410-2 by means of PROFIBUS or PROFINET.

Motion control is performed centrally by the SIMOTION D410-2

using the SIMOTION technology objects.

Structure of an axis grouping with SIMOTION D4x5-2

The following components comprise a SIMOTION D4x5-2 axis

grouping:

• A SIMOTION D4x5-2 Control Unit, designed for open and

closed-loop control of a multiple axis grouping

• A SINAMICS S120 Line Module (infeed module)

• One or more SINAMICS S120 Motor Modules

(power modules)

• Other drive components, such as

- Power supply

-Filter

- Choke, etc.

The connection between the SIMOTION D Control Unit and the

SINAMICS S120 drive modules is made via DRIVE-CLiQ.

Note:

SINAMICS S120 PM340 Power Modules in blocksize format can

be operated on a SIMOTION D4x5-2/CX32-2 with the Control

Unit Adapters CUA31/CUA32.

PROFINET (network 2)

PROFINET (network 1)

Engineering

Single-axis application Multi-axis application

G_PM10_EN_00213a

SIMATIC ET 200S

PROFIBUS

SIMATIC HMI

CX32-2

D4x5-2

SIMOTION D

DRIVE-CLiQ

SIMATIC HMI

D410-2

SIMOTION

DRIVE-CLiQ

(24 DI/DO)

TM15

CU310-2 (2x)

SINAMICS

D410-2

SIMOTION

SIMOTION Motion Control System

SIMOTION D — Drive-based

Overview of SIMOTION D

9/29

Siemens PM 21 · 2013

■

Design (continued)

Expansion using I/O

SIMOTION D can be expanded with the following I/O:

• Distributed I/O systems (e.g. SIMATIC ET 200S)

• Drive-based control cabinet I/O (e.g. TM15, TM31 Terminal

Modules, etc.)

• I/Os in booksize compact format (e.g. TMC1080 PN, ...)

■

Function

Basic functionality

The SIMOTION D basic functionality is supplied with the

CompactFlash card (CF) and is loaded when the voltage is

switched on. The basic functionality includes:

• SIMOTION runtime system

- User-programmable with several languages conforming to

IEC 61131

- Various methods of program execution (cyclic, sequential,

event-driven)

- PLC and arithmetic functionality

- Communication and management functions

- Motion control functions (Motion Control Basic)

• SINAMICS S120 drive control

- SIMOTION D410-2:

Current/speed control (based on CU310-2, firmware version

V4.x) for up to 1 servo axis, 1 vector axis or 1 V/f axis

- SIMOTION D4x5-2:

Current/speed control (based on CU320-2, firmware version

V4.x) for up to 6 servo axes, 6 vector axes or 12 V/f axes,

closed-loop control for infeed (Active Line Module)

• Testing and diagnostic tools

This basic functionality can be expanded with loadable

technology packages, if required.

Position-controlled motion control for drives

• Integrated drives (SINAMICS Integrated):

The power units are connected over DRIVE-CLiQ or over the

integrated PM-IF interface optionally for the

SIMOTION D410-2.

• Drives with digital setpoint interface:

SIMOTION D enables position-controlled motion control for

drives with digital setpoint interfaces via

PROFIBUS DP/PROFINET IO with PROFIdrive.

• Drives with analog setpoint interface, e.g. for retrofit or

hydraulic applications:

The ADI 4 (Analog Drive Interface for 4 Axes) or IM 174

(Interface Module for 4 Axes) module can be used to connect

drives with analog ± 10 V setpoint interfaces. The IM 174 also

makes it possible to connect stepper drives with a pulse

direction interface.

Both modules are connected over PROFIBUS DP. The follow-

ing can be connected to one ADI 4 or IM 174 module:

-4 drives

- 4 encoders

- Digital inputs and outputs

SIMOTION technology packages

A special feature of SIMOTION is that the basic functionality can

be expanded by loading technology packages, such as:

• Motion Control with the technology functions:

- POS – Positioning

- GEAR – Synchronous operation/electronic gear

-CAM – Cam

- PATH – Path interpolation (not D410-2)

• TControl – Temperature controller

• MIIF – Multipurpose Information Interface

Since the technology functions have modular licenses, you only

pay for what you will actually use.

Performance

Hardware-supported floating-point arithmetic enables complex

arithmetic functions to be used effectively.

Fast instruction execution opens up completely new application

possibilities in the mid-performance to high-performance range.

Configuring/parameterizing/programming

SIMOTION SCOUT is a powerful and user-friendly engineering

tool. It is an integrated system for all engineering steps, from

configuring and parameterization, through programming, to test-

ing and diagnostics. Graphical operator prompting, using dialog

boxes and wizards, as well as text-based and graphical

languages for programming, considerably reduce the familiar-

ization and training periods.

Operator control and monitoring (HMI)

Communication services which support user-friendly data ex-

change with HMI devices are integrated in the basic functionality

of SIMOTION D.

Operator control and monitoring can be implemented using

SIMATIC HMI devices, such as TPs (Touch Panels), OPs

(Operator Panels) or MPs (Multi Panels).

These devices can be connected to SIMOTION D over

PROFIBUS, Industrial Ethernet or PROFINET and they are

configured using WinCC flexible.

Version V7.0 and higher of the SCADA system WinCC features a

SIMOTION channel which is included as standard on the

WinCC DVD.

With the SIMATIC NET communications software, an open, stan-

dardized OPC interface is available for accessing SIMOTION

from other Windows-based HMI systems.

SIMOTION IT service and diagnostic functions

SIMOTION IT provides SIMOTION D with an integrated Web

server on which, for example, user-specific Web pages can be

stored.

Read and write access can be made to the Control Unit vari-

ables. Java scripts or applets also allow the implementation of

active operation and display functions in the Web pages that

can be executed on a client PC with an Internet browser.

Process and data communication

Thanks to its integrated interfaces, SIMOTION D supports both

process and data communication.

PROFINET IO with IRT is available for exacting motion control

applications. In addition to cycle clock synchronization, cycle

times of minimum 250 µs and safety-related communication

(PROFIsafe), the PROFINET interfaces on the

SIMOTION D4x5-2 Control Units also support media

redundancy (MRP/MRPD).

The SIMOTION SCOUT engineering system is provided for

user-friendly communication configuration and diagnostics.

SIMOTION Motion Control System

SIMOTION D — Drive-based

Overview of SIMOTION D

9/30 Siemens PM 21 · 2013

■

Function (continued)

Safety Integrated functions

The integrated safety functions of SINAMICS S120 allow

SIMOTION D to provide practical, highly-effective protection for

personnel and machinery.

The following Safety Integrated functions are currently available

for the integrated SINAMICS S120 drive system:

(Terms in accordance with IEC 61800-5-2)

• Safe Torque Off (STO)

• Safe Brake Control (SBC)

• Safe Stop1 (SS1)

• Safe Stop2 (SS2)

• Safe Operating Stop (SOS)

• Safely Limited Speed (SLS)

• Safe Speed Monitor (SSM)

• Safe Direction (SDI)

Activation of Safety Integrated functions

Safety Integrated functions can be activated by the following

methods:

• Via terminals on the D4x5-2/CX32-2 and on the power unit

(STO, SBC, SS1 only)

• Via fail-safe inputs on the TM54F Terminal Module

• Via fail-safe outputs on the D410-2

• Via PROFINET/PROFIBUS with PROFIsafe.

The Safety Integrated functions are implemented electronically

and therefore offer short response times in comparison to

solutions with externally implemented monitoring functions.

Safety Integrated functions via PROFIsafe

Safety Integrated functions are activated via "PROFINET with

PROFIsafe" or "PROFIBUS with PROFIsafe" safe communication.

The control (F logic) is implemented using an F-CPU connected

via PROFINET or PROFIBUS, for example, a

SIMATIC S7-300 F-CPU.

Safety Integrated functions are routed through from the

SIMOTION D410-2 and D4x5-2 Control Units to the following

drives:

• Integrated SINAMICS S120 drives on SIMOTION D410-2 and

D4x5-2

• Drives on the SIMOTION CX32-2 Controller Extension

• Drives on SINAMICS Control Units connected via PROFIBUS

to SIMOTION D.

• Drives on SINAMICS Control Units connected to SIMOTION D

via PROFINET (F-CPU must be connected via PROFINET in

this case).

Note

For more information about possible topologies, axis quantity

structures and suitable components, please contact your local

Siemens sales office.

Detailed information can be found in the SIMOTION D Commis-

sioning Manuals as well as in the SINAMICS documentation.

Safety Integrated solution using a SIMOTION D4x5-2 as an example: Control of the safety functions via PROFINET with PROFIsafe

Safety

program

Light curtain Laser scanner Position switch

Emergency stop

PROFINET

I-Devices

SIMOTION D4x5-2

(I-Device)

SIMATIC ET 200S

(I-Device) with F-I/O

SIMOTION

CX32-2

SIMATIC S7-300 F-CPU

(Controller)

G_PM10_EN_00217

PROFINET / PROFIsafe

DRIVE-CLiQ

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D410-2 Control Units

9/31

Siemens PM 21 · 2013

■

Overview

Left: SIMOTION D410-2 Control Unit attached to mounting plate

Right: SIMOTION D410-2 Control Unit, snapped onto

PM340 Power Module

SIMOTION D410-2 is the SIMOTION D variant for single-axis

applications with multi-axis option in blocksize format. The

Control Units form part of the SIMOTION D4x5-2 controller family

which is the preferred option for multi-axis applications in book-

size format. The SIMOTION D410-2 Control Unit is available in a

PROFIBUS variant (D410-2 DP) and in a PROFIBUS/PROFINET

variant (D410-2 DP/PN).

The SIMOTION D410-2 Control Units are specially designed for

use with the SINAMICS S120 PM340 Power Modules in block-

size format and can be directly connected to the Power Modules

of this series. The SIMOTION D410-2 can also be installed on a

mounting plate if required (to be ordered separately).

SIMOTION D410-2 Control Unit and mounting plate

The SIMOTION D410-2 handles the motion control, technology

and PLC functions associated with a single axis and is also

responsible for the drive control of that axis. The integrated

inputs/outputs support up to 8 high-speed output cams or

8 measuring inputs.

The drive control supports servo control (for a highly dynamic

response), vector control (for maximum torque accuracy) and

V/f control.

SIMOTION D410-2 can be used in synchronized groups:

• For PROFINET: with controller – controller or controller –

device relationship

• For PROFIBUS: with master – slave relationship

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D410-2 Control Units

9/32 Siemens PM 21 · 2013

■

Application

SIMOTION D410-2 is the ideal solution when motion control for

one axis and PLC functionality are required in compact format.

However, it can also be used for small multi-axis groupings with

typically 2 to 3 axes in blocksize format. With these applications,

the SINAMICS Control Units are connected to the

SIMOTION D410-2 via PROFIBUS or PROFINET.

Examples of SIMOTION D410-2 applications include:

• Autonomous control of single axes

• Cross cutters

• Winder applications

• Feeder devices/roller infeed/press feeders

• Synchronized machining equipment

• Compact machine modules, e.g.

- Feeders in post press applications

- Shrink wrapping machines.

• Small multi-axis groupings (typically 2 to 3 axes) in

blocksize format

SIMOTION D410-2 axis grouping with 3 axes (1 × D410-2 DP/PN, 2 × CU310-2 PN)

SIMOTION D410-2 supports motion control with the technology

functions "positioning" (POS), "synchronous operation/electronic

gear" (GEAR) and "cam" (CAM). "Path interpolation" (PATH) is not

supported.

SIMATIC

ET 200S

PROFIBUS

SIMATIC HMI

CU310-2 PN (2x)

SINAMICS

D410-2 DP/PN

SIMOTION

PROFINET

Industrial Ethernet

Engineering

G_PM10_XX_00214a

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D410-2 Control Units

9/33

Siemens PM 21 · 2013

■

Design

Interfaces

Display and diagnostics

• LEDs to display operating states and errors

• 3 measuring sockets

• Service switch and mode selector

• Diagnostics button

Onboard I/Os

• 5 digital inputs

• 8 digital inputs/outputs (max. 8 as output cams or 8 as

measuring inputs)

• 3 fail-safe, two-channel inputs (F-DI); can also be used as 6 DI

• 1 fail-safe output (F-DO); can also be used as 1 DO

• 1 analog input (either ± 10 V or ± 20 mA)

Communication

• 1 × DRIVE-CLiQ

• 1 × PROFINET IO

(1 interface with 2 ports, D410-2 DP/PN only)

• 1 × PROFIBUS DP (D410-2 DP: 2 × PROFIBUS DP)

Data backup

• 1 × slot for SIMOTION CompactFlash card

Additional interfaces

• Terminals for 24 V electronics power supply

• 1 × encoder input for

- HTL/TTL incremental encoder

- SSI absolute encoder (without incremental signals)

• 1 × temperature sensor input (KTY84-130 or PTC)

• PM IF interface (Power Module interface) on rear for direct

operation with a SINAMICS S120 PM340 Power Module in

blocksize format

Assembly/Installation

SIMOTION D410-2 can be directly plugged in to the

SINAMICS S120 PM340 Power Module in blocksize format.

Alternatively, the SIMOTION D410-2 can be mounted on a

mounting plate (to be ordered separately) and connected to the

PM340 Power Module via DRIVE-CLiQ. In this case, the

CUA31/CUA32 Control Unit Adapter has to be connected to the

PM340 Power Module. No more than one Control Unit Adapter

can be connected to the SIMOTION D410-2.

Note:

It is not possible to use the Safety Integrated Extended

Functions via the onboard terminals (F-DI, F-DO) when the

PM340 Power Module is connected via CUA31/CUA32.

Power Modules in AC/AC chassis format are connected to the

SIMOTION D410-2 over the DRIVE-CLiQ interface. Motor

Modules in booksize format cannot be connected to

SIMOTION D410-2.

A SIMOTION D410-2 mounted on the mounting plate can also

be operated without the PM340, e.g.

• for hydraulic applications using a TM31 for the analog inputs

and analog outputs

• for the connection of drives with analog ± 10 V setpoint

interface (IM 174/ADI 4)

Data storage/data backup

The SIMOTION D410-2 Control Units store the retentive process

data permanently in a manner that requires no maintenance

(refer to technical data for memory size). The real-time clock is

backed up for several days via a SuperCap.

The runtime software, user data and user programs are backed

up on the SIMOTION CompactFlash card. The retentive process

data of the Control Unit can also be stored on this CompactFlash

card via system command, e.g. if spare parts are required.

Connectable I/Os

PROFINET IO: (D410-2 DP/PN only)

• Certified PROFINET devices

• Distributed I/Os SIMATIC ET 200S/SP/M/eco PN/pro and TMC

•HMI

PROFIBUS DP:

• Certified PROFIBUS standard slaves (DP-V0, DP-V1, DP-V2)

• SIMATIC ET 200S/M/eco/pro distributed I/O systems

•HMI

DRIVE-CLiQ:

Modules from the SINAMICS range:

• Terminal Modules (max. 8), of which

- maximum 3 are TM15, TM17 High Feature, TM41

- maximum 8 are TM15 DI/DO, TM31

- maximum 1 is TM54F

- SMC/SME Sensor Modules

(max. 5 encoder systems via DRIVE-CLiQ)

- DMC20/DME20 DRIVE-CLiQ Hub Module (max. 1)

- Motors with DRIVE-CLiQ interface

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D410-2 Control Units

9/34 Siemens PM 21 · 2013

■

Integration

SIMOTION D410-2 connection overview

When dimensioning cables, you must always observe the

maximum permissible cable lengths.

If these maximum lengths are exceeded, malfunctions can

occur.

The permissible length of PROFIBUS DP cables depends on the

configuration.

The DRIVE-CLiQ and encoder cables used for the

SINAMICS S120 CU310-2 Control Unit can also be used for

SIMOTION D410-2.

For more information about signal cables, refer to chapter

MOTION-CONNECT connection systems.

DRIVE-

CLiQ

SIMOTION

D410-2

PROFIBUS DP

X127 P1

X124

X21

X24

X150 P1

X23

Power Module

Interface PM-IF

Ethernet

node

SINAMICS

drive

components

24 V supply

Incremental/

absolute encoder

PROFIBUS DP

node

G_PM10_EN_00215

DRIVE-CLiQ cable

5 DI, 8 DI/DO,

3 F-DI (=6 DI),

1 F-DO (=1 DO)

1 AI (U/I), 1 TEMP

SIMOTION D410-2 DP/PN only.

SIMOTION D410-2 DP only.

Ethernet

Onboard

I/Os

Ethernet cable

Power

supply

X100

X120

X121

X130

X131

PROFINET

node, e.g.

SIMATIC ET 200S

PROFINET cables

IRT/RT I/Os

SINAMICS

PM340

PROFIBUS cable

PROFIBUS DP

node

PROFIBUS cable

Encoder

interface

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D410-2 Control Units

9/35

Siemens PM 21 · 2013

■

Technical specifications

Order No. 6AU1410-2AA00-0AA0 6AU1410-2AD00-0AA0

Product brand name SIMOTION SIMOTION

Product-type designation D410-2 DP D410-2 DP/PN

Version of the motion control system Single-axis system with multi-axis option Single-axis system with multi-axis option

PLC and motion control performance

Maximum number of axes 8 8

Minimum PROFIBUS cycle clock ms 1 1

Minimum PROFINET send cycle clock ms –0.25

Minimum servo cycle clock ms 0.5 0.5

Minimum interpolator cycle clock ms 0.5 0.5

Servo/IPO clock cycle, remark 1 ms when using the TO axis and the

integrated closed-loop drive control 1 ms when using the TO axis and the

integrated closed-loop drive control

Integrated drive control

Maximum number of axes for integrated

drive control

• servo 1 1

•vector 1 1

•V/f 1 1

•remark Alternative control modes;

drive control based on SINAMICS S120

CU310-2, firmware version V4.x

Alternative control modes;

drive control based on SINAMICS S120

CU310-2, firmware version V4.x

Memory

RAM (work memory) MB 48 48

Additional RAM work memory for

Java applications MB 20 20

RAM disk (load memory) MB 31 31

Retentive memory KB 108 108

Persistent memory (user data on CF) MB 300 300

Communication

DRIVE-CLiQ interfaces 1 1

Industrial Ethernet interfaces 1 1

PROFIBUS interfaces 2 1

•remark Equidistant and isochronous;

Can be configured as master or slave Equidistant and isochronous;

Can be configured as master or slave

PROFINET interfaces 0 1

•remark –Interface with 2 ports;

supports PROFINET IO with IRT and RT;

configurable as PROFINET IO controller

and/or device

General technical data

Fan Integrated Integrated

DC supply voltage

• rated value V24 24

• permissible range V20.4 … 28.8 20.4 … 28.8

Current consumption, typ. mA 800 800

•remark without load at the inputs/outputs,

without 24 V supply via DRIVE-CLiQ and

PROFIBUS interface

without load at the inputs/outputs,

without 24 V supply via DRIVE-CLiQ and

PROFIBUS interface

Making current, typ. A 3 3

Power loss, typ. W20 20

Ambient temperature

• during long-term storage °C (°F) -25 … +55 (-13 ... +131) -25 … +55 (-13 ... +131)

• during transport °C (°F) -40 … +70 (-40 ... +158) -40 … +70 (-40 ... +158)

• during operating °C (°F) 0 … +55 (+32 ... +131) 0 … +55 (+32 ... +131)

-remark Maximum installation altitude 4000 m

(13124 ft) above sea level. Above an altitude

of 2000 m (6562 ft), the maximum ambient

temperature decreases by 7 °C (44.6 °F) per

1000 m (3281 ft).

Maximum installation altitude 4000 m

(13124 ft) above sea level. Above an altitude

of 2000 m (6562 ft), the maximum ambient

temperature decreases by 7 °C (44.6 °F) per

1000 m (3281 ft).

Relative humidity without condensation

during operating phase %5…95 5…95

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D410-2 Control Units

9/36 Siemens PM 21 · 2013

■

Technical specifications (continued)

Order No. 6AU1410-2AA00-0AA0 6AU1410-2AD00-0AA0

Product brand name SIMOTION SIMOTION

Product-type designation D410-2 DP D410-2 DP/PN

General technical data (continued)

Air pressure hPa 620…1060 620…1060

Protection class IP IP20 IP20

Height mm (in) 186.8 (7.35) 190.7 (7.51)

Width mm (in) 73 (2.87) 73 (2.87)

Depth mm (in) 74.4 (2.93) 74.4 (2.93)

Weight, approx. g (lb) 830 (1.83) 830 (1.83)

Digital inputs

Number of digital inputs 11 11

•remark Of which: 5 DI and 3 F-DI (= 6 DI) Of which: 5 DI and 3 F-DI (= 6 DI)

DC input voltage

• rated value V24 24

• for signal "1" V15 … 30 15 … 30

• for signal "0" V-3 … +5 -3 … +5

Electrical isolation Yes Yes

Current consumption for "1" signal level,

typ. mA 6 6

Input delay for

• signal "0" → "1", typ. µs 50 50

• signal "1" → "0", typ. µs 150 150

Digital inputs/outputs

Number of digital inputs/outputs 8 8

Parameterization possibility of the

digital inputs/outputs Can be parameterized as DI, as DO, as

measuring input (max. 8), as output cam

(max. 8)

Can be parameterized as DI, as DO, as

measuring input (max. 8), as output cam

(max. 8)

If used as an input

DC input voltage

• rated value V24 24

• for signal "1" V15 … 30 15 … 30

• for signal "0" V-3 … +5 -3 … +5

Electrical isolation No No

Current consumption for "1" signal level,

typ. mA 5 5

Input delay for

• signal "0" → "1", typ. µs 5 5

• signal "1" → "0", typ. µs 50 50

Measuring input, reproducibility µs 5 5

•remark Typical value Typical value

Measuring input, resolution µs 1 1

If used as an output

Load voltage

• rated value V24 24

• permissible range V20.4 … 28.8 20.4 … 28.8

Electrical isolation No No

Current carrying capacity for each output,

max. mA 500 500

Leakage current, max. mA 2 2

Output delay for

• signal "0" → "1", typ. µs 150 150

• signal "0" → "1", max. µs 400 400

• signal "1" → "0", typ. µs 75 75

• signal "1" → "0", max. µs 100 100

-remark Data for Vcc = 24 V; load 48 Ohm;

"1" = 90 % VOut, "0" = 10 % VOut Data for Vcc = 24 V; load 48 Ohm;

"1" = 90 % VOut, "0" = 10 % VOut

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D410-2 Control Units

9/37

Siemens PM 21 · 2013

■

Technical specifications (continued)

Order No. 6AU1410-2AA00-0AA0 6AU1410-2AD00-0AA0

Product brand name SIMOTION SIMOTION

Product-type designation D410-2 DP D410-2 DP/PN

If used as an output (continued)

Output cam, reproducibility µs 125 125

•remark Typical value Typical value

Output cam, resolution µs 125 125

•remark Typical value Typical value

Switching frequency of the outputs for

• ohmic load, max. Hz 100 100

• inductive load, max. Hz 0.5 0.5

• lamp load, max. Hz 10 10

Short-circuit protection Yes Yes

Digital outputs

Number of digital outputs 1 1

Parameterization possibility of the

digital outputs Can be parameterized as F-DO or DO Can be parameterized as F-DO or DO

Load voltage

• rated value V24 24

• permissible range V20.4 … 28.8 20.4 … 28.8

Electrical isolation Yes Yes

Current carrying capacity for each output,

max. mA 500 500

Leakage current, max. mA 2 2

Output delay for

• signal "0" → "1", typ. µs 150 150

• signal "0" → "1", max. µs 400 400

• signal "1" → "0", typ. µs 75 75

• signal "1" → "0", max. µs 100 100

-remark Data for Vcc = 24 V; load 48 Ohm;

"1" = 90 % VOut, "0" = 10 % VOut Data for Vcc = 24 V; load 48 Ohm;

"1" = 90 % VOut, "0" = 10 % VOut

Short-circuit protection Yes Yes

Analog input

Number of analog inputs 1 1

If used as an analog voltage input

Input voltage V-10 … +10 -10 … +10

Resolution bit 12 12

•remark + sign + sign

Input resistance (Ri) kΩ100 100

If used as an analog current input

Input current mA -20 … +20 -20 … +20

Resolution bit 11 11

•remark + sign + sign

Input resistance (Ri) Ω250 250

Onboard encoder interface

Encoder interface Optional incremental encoder TTL,

incremental encoder HTL or absolute

encoder SSI without incremental signals

TTL/HTL

Optional incremental encoder TTL,

incremental encoder HTL or absolute

encoder SSI without incremental signals

TTL/HTL

Encoder supply for

•24 V DC A0.35 0.35

•5 V DC A0.35 0.35

Limiting frequency, max. kHz 500 500

SSI baud rate kBd 100 … 250 100 … 250

Resolution of absolute position SSI bit 30 30

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D410-2 Control Units

9/38 Siemens PM 21 · 2013

■

Technical specifications (continued)

■

Selection and ordering data

Order No. 6AU1410-2AA00-0AA0 6AU1410-2AD00-0AA0

Product brand name SIMOTION SIMOTION

Product-type designation D410-2 DP D410-2 DP/PN

Onboard encoder interface (continued)

Cable length for

• TTL incremental encoder, max. m (ft) 100 (328) 100 (328)

• HTL incremental encoder for

- unipolar signals, max. m (ft) 100 (328) 100 (328)

- bipolar signals, max. m (ft) 300 (984) 300 (984)

-remark TTL only bipolar signals; for bipolar signals,

the signal lines must be twisted in pairs and

shielded

TTL only bipolar signals; for bipolar signals,

the signal lines must be twisted in pairs and

shielded

• SSI absolute encoder, max. m (ft) 100 (328) 100 (328)

Additional technical data

Input for the temperature measurement KTY84-130 or PTC KTY84-130 or PTC

Backup of non-volatile data

• Backup of retentive data Unlimited buffer duration Unlimited buffer duration

• Buffer time real-time clock 5 days min. 5 days min.

•remark Data backup is maintenance-free Data backup is maintenance-free

Approvals

•USA UL 61010-1, 2nd Ed. CAN/CSA-C22.2

NO. 61010-1-04 UL 61010-1, 2nd Ed. CAN/CSA-C22.2

NO. 61010-1-04

• Canada UL 61010-1, 2nd Ed. CAN/CSA-C22.2

NO. 61010-1-04 UL 61010-1, 2nd Ed. CAN/CSA-C22.2

NO. 61010-1-04

• Australia C-Tick C-Tick

Description Order No.

SIMOTION D410-2 DP

Control Unit

(SIMOTION V4.3 SP1 HF2 or higher)

6AU1410-2AA00-0AA0

SIMOTION D410-2 DP/PN

Control Unit

(SIMOTION V4.3 SP1 HF3 or higher)

6AU1410-2AD00-0AA0

SIMOTION

CompactFlash card (CF) 1 GB

with the current SIMOTION Kernel and

SINAMICS S120 drive software V4.x

Pre-installed license can be obtained

using additional order codes 1)

Note:

A separate CompactFlash card is

available for the SIMOTION D4x5-2

Control Units. (6AU1400-2PA22-0AA0)

6AU1400-1PA22-0AA0

MultiAxes Package license for

SIMOTION D410-2

• As Z option

• As single license

M41

6AU1820-0AA41-0AB0

1) Note about licenses for runtime software:

Runtime software licenses can either be pre-installed on a CompactFlash

card (CF) or ordered separately.

See Ordering licenses for runtime software on page 9/63.

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D410-2 Control Units

9/39

Siemens PM 21 · 2013

■

Accessories

Description Order No.

Accessories for SIMOTION D410-2

Rear panel mounting plate

For installing the SIMOTION D410-2 in a

different location if you do not wish to

connect it to the Power Module.

6AU1400-7AA05-0AA0

Accessories for PROFIBUS

PROFIBUS RS485 bus connector with

axial cable outlet (180°)

Max. transmission rate 12 Mbit/s

• Without PG socket, with terminal blocks 6GK1500-0EA02

• Without PG socket, with FastConnect

insulation displacement method 6GK1500-0FC10

PROFIBUS RS485 bus connector with

angular cable outlet (35°) and

screw-type terminals

Max. transmission rate 12 Mbit/s

• Without PG interface 6ES7972-0BA42-0XA0

• With PG interface 6ES7972-0BB42-0XA0

PROFIBUS FastConnect RS485 bus

connector with angular cable outlet

(35°) and insulation displacement

terminals

Max. transmission rate 12 Mbit/s

• Without PG interface 6ES7972-0BA60-0XA0

• With PG interface 6ES7972-0BB60-0XA0

PROFIBUS RS485 bus connector with

cable outlet (90°) and screw-type

terminals

Max. transmission rate 12 Mbit/s

• Without PG interface 6ES7972-0BA12-0XA0

• With PG interface 6ES7972-0BB12-0XA0

PROFIBUS FastConnect RS485 bus

connector with cable outlet (90°) and

insulation displacement terminals

Max. transmission rate 12 Mbit/s

• Without PG interface 6ES7972-0BA52-0XA0

• With PG interface 6ES7972-0BB52-0XA0

Accessories for PROFINET

RJ45 FastConnect connector for

Industrial Ethernet/PROFINET

180° cable outlet

• 1 pack = 1 unit 6GK1901-1BB10-2AA0

• 1 pack = 10 units 6GK1901-1BB10-2AB0

• 1 pack = 50 units 6GK1901-1BB10-2AE0

RJ45 FastConnect connector for

Industrial Ethernet/PROFINET

145° cable outlet

• 1 pack = 1 unit 6GK1901-1BB30-0AA0

• 1 pack = 10 units 6GK1901-1BB30-0AB0

• 1 pack = 50 units 6GK1901-1BB30-0AE0

FastConnect cables for

Industrial Ethernet/PROFINET1)

• IE FC Standard Cable GP 2x2 6XV1840-2AH10

• IE FC Flexible Cable GP 2x2 6XV1870-2B

• IE FC Trailing Cable GP 2x2 6XV1870-2D

• IE FC Trailing Cable 2x2 6XV1840-3AH10

• IE FC Marine Cable 2x2 6XV1840-4AH10

Stripping tool for

Industrial Ethernet/PROFINET

FastConnect cables

• IE FC stripping tool 6GK1901-1GA00

Other accessories

Dust-proof blanking plugs

(50 units) for sealing unused

DRIVE-CLiQ, Ethernet and

PROFINET ports

6SL3066-4CA00-0AA0

Description Order No.

1) Sold by the meter; max. length 1000 m (3281 ft);

minimum order 20 m (65.62 ft).

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D410-2 Control Units

9/40 Siemens PM 21 · 2013

■

More information

• about PROFIBUS DP/MPI cables and MOTION-CONNECT

can be found in chapter MOTION-CONNECT connection

systems.

• about PROFIBUS DP, Industrial Ethernet and PROFINET

can be found in Catalog IK PI and the Industry Mall under

Automation Technology/Industrial Communication.

• about the ordering data for SINAMICS drive components such

as Power Modules, DRIVE-CLiQ cables, etc. can be found in

chapter SINAMICS S120 drive system and the Industry Mall

under Drive Technology/Converters/...

Integrated drive control

The drive control functions integrated in a SIMOTION D410-2

are based on the drive control of a SINAMICS S120 CU310-2

(firmware version V4.x), although there is a slight difference in

functionality. For example, the SIMOTION D410-2 does not have

a basic positioner function (EPos), as this is already covered by

SIMOTION technology functions.

For more information, refer to chapter System description –

Dimensioning and the documentation for SIMOTION and

SINAMICS.

Licensing notes

SIMOTION D410-2 has an integrated drive control for either a

servo, a vector or a V/f axis and is therefore ideal for single-axis

applications.

One real axis can be used without license on the Control Unit.

Speed-controlled axes and virtual axes never require a license.

SIMOTION D410-2 can be extended with additional

SINAMICS S110/S120 Control Units (e.g. CU305) and so can

also be used for smaller multi-axis applications (e.g. with 2 – 3

axes). A license is required for any additional axes. Where a

license is required for a POS axis, the POS single-axis license

is the ideal solution. It is better to use the MultiAxes Package

D410-2 in the case of GEAR/CAM or more than one POS license.

The axis license with the highest functionality is covered by the

inclusive license (a real axis).

The functionality has the following granularity:

CAM > GEAR > POS.

Example:

Application with 2 real axes: 1 POS, 1 CAM.

Only a POS license needs to be purchased because the higher-

order CAM license is already included.

Licenses are also required for runtime functions such as

SIMOTION IT Virtual Machine. These can be pre-installed on the

CompactFlash card (CF card) or ordered separately.

For more information, refer to section Ordering of licenses for

runtime software.

SIZER for Siemens Drives engineering tool

With the SIZER for Siemens Drives engineering tool, you can

easily configure the SINAMICS S110, S120 drive families

including SIMOTION. It provides you with support for selecting

and dimensioning the components for a Motion Control task.

You can also determine the possible number of axes and the re-

sulting utilization with SIZER for Siemens Drives in accordance

with your performance requirements.

For more information about SIZER for Siemens Drives, refer to

chapter System description – Dimensioning.

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/41

Siemens PM 21 · 2013

■

Overview

SIMOTION D4x5-2 are drive-based Control Units for multi-axis

systems. The individual variants essentially differ in terms of their

PLC and motion control performance, memory size and inter-

faces. The main distinguishing features are:

• available

– not available

The SIMOTION D425-2, D435-2, D445-2 and D455-2 Control

Units feature PLC and motion control performance (open-loop

control and motion control) for up to 16, 32, 64 or 128 axes,

as required.

The integrated drive control enables each D4x5-2 Control Unit to

operate up to 6 servo, 6 vector or 12 V/f axes.

The integrated drive control is based on the drive control of a

SINAMICS S120 CU320-2 Control Unit (firmware version V4.x)

and supports servo control (for a highly dynamic response),

vector control (for maximum torque accuracy) and V/f control.

Extension of the drive computing performance

The motion control performance of a SIMOTION D4x5-2 can be

utilized in full by expanding the computing performance at the

drive in two different ways:

• SINAMICS S120 Control Units (e.g. CU320-2) can be con-

nected together with further SINAMICS S120 drive modules

via PROFIBUS or PROFINET.

• The SIMOTION CX32-2 Controller Extension can be con-

nected via DRIVE-CLiQ, This module is extremely compact

and can control up to 6 servo, 6 vector or 12 V/f axes.

Distinguishing features 2) SIMOTION

D425-2 DP SIMOTION

D425-2 DP/PN SIMOTION

D435-2 DP SIMOTION

D435-2 DP/PN SIMOTION

D445-2 DP/PN SIMOTION

D455-2 DP/PN

Performance class BASIC BASIC STANDARD STANDARD HIGH ULTRA-HIGH

Maximum number of axes 16 16 32 32 64 128

Second runtime level

SERVOFast / IPOFast

– – – • • •

DRIVE-CLiQ interfaces 4 4 6 6 6 6

Communication interfaces

•PROFIBUS 2 2 2 2 2 2

•PROFINET –1 (3 ports) 1) –1 (3 ports) 1) 1 (3 ports) 1) 1 (3 ports) 1)

•Ethernet 3 2 3 2 2 2

1) Optional second PROFINET interface via CBE30-2 (4 ports) 2) For further details such as cycle times, memory configuration, etc.,

refer to technical specifications.

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/42 Siemens PM 21 · 2013

■

Application

Field of application for the SIMOTION D4x5-2 Control Units are

applications with a large number of coordinated axes and short

cycle times.

Typical fields of application are:

• Compact multi-axis machines

• High-performance applications with short machine cycles

• Compact machines

- Including the complete machine control in the drive

- With extensive connection possibilities for communication,

HMI and I/O

• Distributed drive concepts

- Applications with a large number of axes

- Synchronization of several SIMOTION D Control Units via

distributed synchronous operation

■

Design

SIMOTION D425-2 DP (on left) and SIMOTION D435-2 DP/PN with

CBE30-2 inserted (on right)

Interfaces

Display and diagnostics

• LEDs to display operating states and errors

• 3 measuring sockets

• Service switch and mode selector

• Diagnostics button

Onboard I/Os

• 12 digital inputs

• 16 digital inputs/outputs (max. 16 as high-speed measuring

inputs, max. 8 as high-speed output cams)

Communication

• 6 x DRIVE-CLiQ (4 × DRIVE-CLiQ for D425-2)

• 2 x Industrial Ethernet (3 × Industrial Ethernet for D4x5-2 DP),

of which one interface easily accessible on the module front

• 2 x PROFIBUS DP

• 1 x PROFINET IO

(1 interface with 3 ports, with D4x5-2 DP/PN only)

•2xUSB

Data backup

• 1 x slot for SIMOTION CompactFlash card

Additional interfaces

• Terminals for 24 V electronics power supply

Option modules

With the TB30 Terminal Board, the SIMOTION D4x5-2 Control

Units can be extended with 4 digital inputs, 4 digital outputs,

2 analog inputs and 2 analog outputs. The TB30 Terminal Board

is plugged into the option slot on the Control Unit.

Using the CBE30-2 Communication Board for PROFINET IO, it is

possible to equip the SIMOTION D4x5-2 DP/PN Control Units

with a second PROFINET interface with 4 ports.

Applications for a second PROFINET interface:

• 2 separate networks (e.g. one local and one higher-level

network)

• Address space can be doubled to 2 × 4 KB

• Maximum number of connectable devices can be doubled to

2×64

• Separation into a high-speed and a slow bus system/execu-

tion system in order to make efficient use of the controller's

capacity (applies only to SIMOTION D435-2 DP/PN,

D445-2 DP/PN and D455-2 DP/PN)

- PROFINET onboard: SERVOFast and IPOFast

- PROFINET via CBE30-2: SERVO / IPO / IPO2

Note:

The CBE30-2 cannot be used in SIMOTION D4x5-2 DP Control

Units. If the CBE30-2 is used without SERVOFast and IPOFast,

then both PROFINET interfaces are assigned to

SERVO / IPO / IPO2.

Assembly/Installation

The SIMOTION D4x5-2 Control Units can be mounted in the

control cabinet in one of three ways:

• Mounting with spacers

• Mounting without spacers (D425-2 and D435-2 only)

• Mounting without spacers (external cooling, D445-2 and

D455-2 only)

With external air cooling, the cooling fins of the D445-2/D455-2

Control Unit are outside of the control cabinet. A seal (option) is

required so that the Control Unit can be hermetically mounted in

the rear cabinet panel.

The SIMOTION D4x5-2 Control Units are supplied with pre-

assembled spacers. These can be removed if necessary.

Data storage/data backup

The SIMOTION D4x5-2 Control Units store the retentive process

data permanently in a manner that requires no maintenance

(refer to technical data for memory size).

The real-time clock is backed up for several days via a Super-

Cap. The backup time can be extended via a battery in the

double fan/battery module.

The double fan/battery module incl. battery is contained in the

scope of supply of the SIMOTION D4x5-2.

The runtime software, user data and user programs are stored

retentively on the CompactFlash card (CF). The retentive

process data of the Control Unit can also be stored on this

CompactFlash card via system command, e.g. if spare parts

are required.

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/43

Siemens PM 21 · 2013

■

Design (continued)

Extended execution system (SERVOFast / IPOFast)

The SIMOTION D435-2 DP/PN, D445-2 DP/PN and

D455-2 DP/PN Control Units have (in addition to SERVO,

IPO and IPO2) an additional second runtime level

(SERVOFast and IPOFast).

The additional runtime level allows the distribution of electric

and/or hydraulic axes with different dynamic responses on a

slow and a fast bus system so that the performance of the

controller can be used more efficiently.

It also enables a particularly fast I/O processing in conjunction

with high-speed PROFINET I/O modules.

Thanks to the extended execution system, electrical positioning

drives can be controlled with cycle times in the millisecond

range requiring fewer resources and at the same time the

pressure-controlled axes of an hydraulic press can be controlled

with a high dynamic response and short cycle times.

Closed-loop control of an hydraulic press with SERVOFast and IPOFast

If SERVOFast and IPOFast are activated, the following assignment

applies:

•SERVO

Fast and IPOFast are assigned to the PROFINET.

• SERVO, IPO and IPO2 are assigned to the PROFIBUS or the

integrated drives of the SIMOTION D4x5-2/CX32-2.

If a second PROFINET interface is provided by means of a

CBE30-2, this will also be assigned to SERVO, IPO and IPO2. In

this case, the onboard PROFINET interface is always assigned

to SERVOFast und IPOFast.

Connectable I/Os

PROFINET IO:

• Certified PROFINET devices

• Distributed I/Os SIMATIC ET 200S/SP/M/eco PN/pro and TMC

• Drive systems (e.g. SINAMICS S110/S120)

PROFIBUS DP:

• Certified PROFIBUS standard slaves

(DP-V0, DP-V1, DP-V2)

• SIMATIC ET 200S/M/eco/pro distributed I/Os

• Drive systems (e.g. SINAMICS S110/S120)

DRIVE-CLiQ:

Modules from the SINAMICS S120 range:

• TM15, TM17 High Feature Terminal Modules, TM31, etc.

• SMC/SME Sensor Modules

• DMC20/DME20 DRIVE-CLiQ Hub Module

USB:

The integrated USB interface allows, for example, a USB

memory stick to be connected for a project or firmware update.

Expansion with SINAMICS S120 drive modules

SINAMICS S120 drive modules in booksize format (Line

Modules, Motor Modules, etc.) are connected to the

SIMOTION D4x5-2 Control Unit via DRIVE-CLiQ.

SINAMICS S120 PM340 Power Modules in blocksize format can

be operated on the SIMOTION D4x5-2 Control Units with the

CUA31/CUA32 Control Unit Adapters.

Note:

DRIVE-CLiQ cables which are required to connect Line/Motor

Modules to SIMOTION D are supplied in a standard length with

the Line/Motor Modules.

SIMATIC ET 200S

High Speed

SSI AI AO

Hydraulic press

Servo drive

SSI: Synchronous Serial Interface

(interface of absolute encoder)

Control signal (servo valve)

SERVO = 1 ms / IPO = 2 ms SERVOFast = 0.25 ms / IPOFast = 0.25 ms

Pressure

Position Plunger

Die cushion

G_PM10_EN_00205b

SIMOTION

D4x5-2

PROFINET

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/44 Siemens PM 21 · 2013

■

Integration

SIMOTION D4x5-2 Control Unit connection overview

When dimensioning cables, you must always observe the

maximum permissible cable lengths.

If these maximum lengths are exceeded, malfunctions can

occur.

The permissible length of PROFIBUS DP cables depends on the

configuration.

The DRIVE-CLiQ cables used for the SINAMICS S120 CU320-2

Control Unit can also be used for SIMOTION D4x5-2 Control

Units.

For more information about signal cables, refer to chapter

MOTION-CONNECT connection systems.

6ES7901-4BD00-0XA0

not

D425-2

Ethernet

USB

DRIVE-

CLiQ

Ethernet

node

12 DI, 16 DI/DO

SINAMICS S120

drive components

24 V supply

Programming

device (PG)

USB memory

stick

PROFIBUS DP

node

DRIVE-CLiQ cable

Ethernet cable

PROFIBUS cables

Onboard

I/Os

Power

supply

PROFINET IO2)

CBE30-2

(optional)

e.g. SINAMICS

S120, ET 200S

PROFINET IO

IRT/RT I/Os

e.g. SINAMICS

S120, ET 200S

PROFINET IO

IRT/RT I/Os

G_PM10_EN_00216a

1) X120 only for D4x5-2 DP.

2) D4x5-2 DP/PN only (CBE30-2 as second PROFINET interface).

3) D4x5-2 DP/PN only.

X100

X103

X104

X105

SIMOTION

D4x5-2

X122

X132

X142

X124

X136

PROFIBUS DP

X126

X135

X125

X150 P1

X1400 P1

X120 P1

X127 P1

X130 P1

PROFINET IO3)

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/45

Siemens PM 21 · 2013

■

Technical specifications

Order No.

6AU1425-2AA00-

0AA0 6AU1425-2AD00-

0AA0 6AU1435-2AA00-

0AA0 6AU1435-2AD00-

0AA0 6AU1445-2AD00-

0AA0 6AU1455-2AD00-

0AA0

Product brand name SIMOTION SIMOTION SIMOTION SIMOTION SIMOTION SIMOTION

Product-type designation D425-2 DP D425-2 DP/PN D435-2 DP D435-2 DP/PN D445-2 DP/PN D455-2 DP/PN

Performance class for

motion control system BASIC

Performance BASIC

Performance STANDARD

Performance HIGH

Performance ULTRA-HIGH

Performance

Version of the motion

control system Multiple-axis

system Multiple-axis

system

PLC and motion control performance

Maximum number of axes 16 16 32 32 64 128

Minimum PROFIBUS

cycle clock ms 111111

Minimum PROFINET

send cycle clock ms 0.25 0.25 0.25 0.25 0.25 0.25

Minimum servo cycle

clock ms 0.5 0.5 0.5 0.25 0.25 0.25

Minimum interpolator

cycle clock ms 0.5 0.5 0.5 0.25 0.25 0.25

Servo / IPO clock cycle,

remark –––0.5 ms in con-

junction with

integrated

SINAMICS S120

drives

(SINAMICS

Integrated);

0.25 ms in

conjunction with

SERVOFAST and

IPOFAST

0.5 ms in con-

junction with

integrated

SINAMICS S120

drives

(SINAMICS

Integrated);

0.25 ms in

conjunction with

SERVOFAST and

IPOFAST

0.5 ms in con-

junction with

integrated

SINAMICS S120

drives

(SINAMICS

Integrated);

0.25 ms in

conjunction with

SERVOFAST and

IPOFAST

Integrated drive control

Maximum number of axes

for integrated drive

control

• servo 666666

•vector 666666

•V/f 12 12 12 12 12 12

•remark Alternative

control modes;

drive control

based on

SINAMICS S120

CU320-2,

firmware

version V4.x

Alternative

control modes;

drive control

based on

SINAMICS S120

CU320-2,

firmware

version V4.x

Alternative

control modes;

drive control

based on

SINAMICS S120

CU320-2,

firmware

version V4.x

Alternative

control modes;

drive control

based on

SINAMICS S120

CU320-2,

firmware

version V4.x

Alternative

control modes;

drive control

based on

SINAMICS S120

CU320-2,

firmware

version V4.x

Alternative

control modes;

drive control

based on

SINAMICS S120

CU320-2,

firmware

version V4.x

Memory

RAM (work memory) MB 48 48 64 64 128 256

Additional RAM work

memory for Java

applications

MB 20 20 20 20 20 20

RAM disk (load memory) MB 31 31 41 41 56 76

Retentive memory KB 364 364 364 364 512 512

Persistent memory

(user data on CF) MB 300 300 300 300 300 300

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/46 Siemens PM 21 · 2013

■

Technical specifications (continued)

Order No.

6AU1425-2AA00-

0AA0 6AU1425-2AD00-

0AA0 6AU1435-2AA00-

0AA0 6AU1435-2AD00-

0AA0 6AU1445-2AD00-

0AA0 6AU1455-2AD00-

0AA0

Product brand name SIMOTION SIMOTION SIMOTION SIMOTION SIMOTION SIMOTION

Product-type designation D425-2 DP D425-2 DP/PN D435-2 DP D435-2 DP/PN D445-2 DP/PN D455-2 DP/PN

Communication

DRIVE-CLiQ interfaces 446666

USB interfaces 222222

Industrial Ethernet

interfaces 323222

PROFIBUS interfaces 222222

•remark

Equidistant and

isochronous; Can

be configured as

master or slave

Equidistant and

isochronous; Can

be configured as

master or slave

Equidistant and

isochronous; Can

be configured as

master or slave

Equidistant and

isochronous; Can

be configured as

master or slave

Equidistant and

isochronous; Can

be configured as

master or slave

Equidistant and

isochronous; Can

be configured as

master or slave

PROFINET interfaces 010111

•remark –1 interface with

3 ports onboard;

1 interface with

4 ports optional

via CBE30-2;

functionality:

supports

PROFINET IO

with IRT and RT;

configurable as

PROFINET IO

controller and/or

device; supports

media redun-

dancy (MRP and

MRPD)

–

1 interface with

3 ports onboard;

1 interface with

4 ports optional

via CBE30-2;

functionality:

supports

PROFINET IO

with IRT and RT;

configurable as

PROFINET IO

controller and/or

device; supports

media redun-

dancy (MRP and

MRPD)

1 interface with

3 ports onboard;

1 interface with

4 ports optional

via CBE30-2;

functionality:

supports

PROFINET IO

with IRT and RT;

configurable as

PROFINET IO

controller and/or

device; supports

media redun-

dancy (MRP and

MRPD)

1 interface with

3 ports onboard;

1 interface with

4 ports optional

via CBE30-2;

functionality:

supports

PROFINET IO

with IRT and RT;

configurable as

PROFINET IO

controller and/or

device; supports

media redun-

dancy (MRP and

MRPD)

General technical data

Fan Double fan/

battery module

included in

scope of delivery

Double fan/

battery module

included in

scope of delivery

Double fan/

battery module

included in

scope of delivery

Double fan/

battery module

included in

scope of delivery

Double fan/

battery module

included in

scope of delivery

Double fan/

battery module

included in

scope of delivery

DC supply voltage

• rated value V24 24 24 24 24 24

• permissible range V20.4 … 28.8 20.4 … 28.8 20.4 … 28.8 20.4 … 28.8 20.4 … 28.8 20.4 … 28.8

Current consumption,

typ. mA 700 1000 700 1000 1900 1900

•remark Without load at

the inputs/out-

puts, without

24 V supply via

DRIVE-CLiQ and

PROFIBUS

interface

Without load at

the inputs/out-

puts, without

24 V supply via

DRIVE-CLiQ and

PROFIBUS

interface

Without load at

the inputs/out-

puts, without

24 V supply via

DRIVE-CLiQ and

PROFIBUS

interface

Without load at

the inputs/out-

puts, without

24 V supply via

DRIVE-CLiQ and

PROFIBUS

interface

Without load at

the inputs/out-

puts, without

24 V supply via

DRIVE-CLiQ and

PROFIBUS

interface

Without load at

the inputs/out-

puts, without

24 V supply via

DRIVE-CLiQ and

PROFIBUS

interface

Making current, typ. A555555

Power loss, typ. W17 24 17 24 46 46

Ambient temperature

• during long-term storage °C

(°F) -25 … +55

(-13 ... +131) -25 … +55

(-13 ... +131)

• during transport °C

(°F) -40 … +70

(-40 ... +158) -40 … +70

(-40 ... +158)

• during operating °C

(°F) 0 … +55

(+32 ... +131) 0 … +55

(+32 ... +131)

-remark

Maximum instal-

lation altitude

4000 m (13124 ft)

above sea level.

Above an alti-

tude of 2000 m

(6562 ft), the

maximum ambi-

ent temperature

decreases by

7 °C (44.6 °F) per

1000 m (3281 ft).

Maximum instal-

lation altitude

4000 m (13124 ft)

above sea level.

Above an alti-

tude of 2000 m

(6562 ft), the

maximum ambi-

ent temperature

decreases by

7°C (44.6°F) per

1000 m (3281 ft).

Maximum instal-

lation altitude

4000 m (13124 ft)

above sea level.

Above an alti-

tude of 2000 m

(6562 ft), the

maximum ambi-

ent temperature

decreases by

7 °C (44.6 °F) per

1000 m (3281 ft).

Maximum instal-

lation altitude

4000 m (13124 ft)

above sea level.

Above an alti-

tude of 2000 m

(6562 ft), the

maximum ambi-

ent temperature

decreases by

7°C (44.6°F) per

1000 m (3281 ft).

Maximum instal-

lation altitude

4000 m (13124 ft)

above sea level.

Above an alti-

tude of 2000 m

(6562 ft), the

maximum ambi-

ent temperature

decreases by

7°C (44.6°F) per

1000 m (3281 ft).

Maximum instal-

lation altitude

4000 m (13124 ft)

above sea level.

Above an alti-

tude of 2000 m

(6562 ft), the

maximum ambi-

ent temperature

decreases by

7°C (44.6°F) per

1000 m (3281 ft).

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/47

Siemens PM 21 · 2013

■

Technical specifications (continued)

Order No.

6AU1425-2AA00-

0AA0 6AU1425-2AD00-

0AA0 6AU1435-2AA00-

0AA0 6AU1435-2AD00-

0AA0 6AU1445-2AD00-

0AA0 6AU1455-2AD00-

0AA0

Product brand name SIMOTION SIMOTION SIMOTION SIMOTION SIMOTION SIMOTION

Product-type designation D425-2 DP D425-2 DP/PN D435-2 DP D435-2 DP/PN D445-2 DP/PN D455-2 DP/PN

General technical data (continued)

Relative humidity with-

out condensation during

operating phase

%5…95 5…95 5…95 5…95 5…95 5…95

Air pressure hPa 620 … 1 060 620…1060 620 … 1 060 620 … 1 060 620…1060 620…1060

Protection class IP IP20 IP20 IP20 IP20 IP20 IP20

Height mm (in) 380 (14.96) 380 (14.96) 380 (14.96) 380 (14.96) 380 (14.96) 380 (14.96)

Width mm (in) 50 (1.97) 50 (1.97) 50 (1.97) 50 (1.97) 50 (1.97) 50 (1.97)

Depth mm (in) 270 (10.63) 270 (10.63) 270 (10.63) 270 (10.63) 270 (10.63) 270 (10.63)

•remark When the spacer

is removed

230 mm (9.05 in)

deep

When the spacer

is removed

230 mm (9.05 in)

deep

When the spacer

is removed

230 mm (9.05 in)

deep

When the spacer

is removed

230 mm (9.05 in)

deep

When the spacer

is removed

230 mm (9.05 in)

deep

When the spacer

is removed

230 mm (9.05 in)

deep

Net weight g (lb) 3600 (7.94) 3600 (7.94) 3600 (7.94) 3600 (7.94) 4400 (9.70) 4400 (9.70)

Digital inputs

Number of digital inputs 12 12 12 12 12 12

DC input voltage

• rated value V24 24 24 24 24 24

• for signal "1" V15 … 30 15 … 30 15 … 30 15 … 30 15 … 30 15 … 30

• for signal "0" V-3 … +5 -3 … +5 -3 … +5 -3 … +5 -3 … +5 -3 … +5

Electrical isolation Yes Yes Yes Yes Yes Yes

•remark In groups of 6 In groups of 6 In groups of 6 In groups of 6 In groups of 6 In groups of 6

Current consumption for

"1" signal level, typ. mA 999999

Input delay for

• signal "0" → "1", typ. µs 50 50 50 50 50 50

• signal "1" → "0", typ. µs 150 150 150 150 150 150

Digital inputs/outputs

Number of digital

inputs/outputs 16 16 16 16 16 16

Parameterization

possibility of the

digital inputs/outputs

Can be parame-

terized as DI,

as DO, as

measuring input

(max. 16), as

output cam

(max. 8)

Can be parame-

terized as DI,

as DO, as

measuring input

(max. 16), as

output cam

(max. 8)

Can be parame-

terized as DI,

as DO, as

measuring input

(max. 16), as

output cam

(max. 8)

Can be parame-

terized as DI,

as DO, as

measuring input

(max. 16), as

output cam

(max. 8)

Can be parame-

terized as DI,

as DO, as

measuring input

(max. 16), as

output cam

(max. 8)

Can be parame-

terized as DI,

as DO, as

measuring input

(max. 16), as

output cam

(max. 8)

If used as an input

DC input voltage

• rated value V24 24 24 24 24 24

• for signal "1" V15 … 30 15 … 30 15 … 30 15 … 30 15 … 30 15 … 30

• for signal "0" V-3 … +5 -3 … +5 -3 … +5 -3 … +5 -3 … +5 -3 … +5

Electrical isolation No No No No No No

Current consumption for

"1" signal level, typ. mA 999999

Input delay for

• signal "0" → "1", typ. µs 555555

• signal "1" → "0", typ. µs 50 50 50 50 50 50

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/48 Siemens PM 21 · 2013

■

Technical specifications (continued)

Order No.

6AU1425-2AA00-

0AA0 6AU1425-2AD00-

0AA0 6AU1435-2AA00-

0AA0 6AU1435-2AD00-

0AA0 6AU1445-2AD00-

0AA0 6AU1455-2AD00-

0AA0

Product brand name SIMOTION SIMOTION SIMOTION SIMOTION SIMOTION SIMOTION

Product-type designation D425-2 DP D425-2 DP/PN D435-2 DP D435-2 DP/PN D445-2 DP/PN D455-2 DP/PN

If used as an input (continued)

Measuring input,

reproducibility µs 555555

Measuring input,

resolution µs 111111

If used as an output

Load voltage

• rated value V24 24 24 24 24 24

• permissible range V20.4 … 28.8 20.4 … 28.8 20.4 … 28.8 20.4 … 28.8 20.4 … 28.8 20.4 … 28.8

Electrical isolation No No No No No No

Current carrying capacity

for each output, max. mA 500 500 500 500 500 500

Leakage current, max. mA 222222

Output delay for

• signal "0" → "1", typ. µs 150 150 150 150 150 150

• signal "0" → "1", max. µs 400 400 400 400 400 400

• signal "1" → "0", typ. µs 75 75 75 75 75 75

• signal "1" → "0", max. µs 150 150 150 150 150 150

-remark Data for

Vcc = 24 V;

load 48 Ohm;

"1" = 90 % VOut,

"0" = 10 % VOut

Data for

Vcc = 24 V;

load 48 Ohm;

"1" = 90 % VOut,

"0" = 10 % VOut

Data for

Vcc = 24 V;

load 48 Ohm;

"1" = 90 % VOut,

"0" = 10 % VOut

Data for

Vcc = 24 V;

load 48 Ohm;

"1" = 90 % VOut,

"0" = 10 % VOut

Data for

Vcc = 24 V;

load 48 Ohm;

"1" = 90 % VOut,

"0" = 10 % VOut

Data for

Vcc = 24 V;

load 48 Ohm;

"1" = 90 % VOut,

"0" = 10 % VOut

Output cam,

reproducibility µs 10 10 10 10 10 10

Output cam, resolution µs 111111

Switching frequency of

the outputs for

• ohmic load, max. Hz 100 100 100 100 100 100

• inductive load, max. Hz 222222

• lamp load, max. Hz 11 11 11 11 11 11

Short-circuit protection Yes Yes Yes Yes Yes Yes

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/49

Siemens PM 21 · 2013

■

Technical specifications (continued)

Order No.

6AU1425-2AA00-

0AA0 6AU1425-2AD00-

0AA0 6AU1435-2AA00-

0AA0 6AU1435-2AD00-

0AA0 6AU1445-2AD00-

0AA0 6AU1455-2AD00-

0AA0

Product brand name SIMOTION SIMOTION SIMOTION SIMOTION SIMOTION SIMOTION

Product-type designation D425-2 DP D425-2 DP/PN D435-2 DP D435-2 DP/PN D445-2 DP/PN D455-2 DP/PN

Additional technical data

Backup of

non-volatile data

• Backup of retentive data Unlimited buffer

duration Unlimited buffer

duration

• Buffer time real-time clock 4 days min. 4 days min. 4 days min. 4 days min. 4 days min. 4 days min.

•remark Longer buffer

duration of the

real time clock

using a battery

which is inserted

in double fan/

battery module

Longer buffer

duration of the

real time clock

using a battery

which is inserted

in double fan/

battery module

Longer buffer

duration of the

real time clock

using a battery

which is inserted

in double fan/

battery module

Longer buffer

duration of the

real time clock

using a battery

which is inserted

in double fan/

battery module

Longer buffer

duration of the

real time clock

using a battery

which is inserted

in double fan/

battery module

Longer buffer

duration of the

real time clock

using a battery

which is inserted

in double fan/

battery module

Approvals

•USA UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

• Canada UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

UL 61010-1,

2nd Ed. CAN/

CSA-C22.2

NO. 61010-1-04

• Australia C-Tick C-Tick C-Tick C-Tick C-Tick C-Tick

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/50 Siemens PM 21 · 2013

■

Selection and ordering data

Note:

MultiAxes bundles are no longer available for the SIMOTION

D4x5-2 (packages comprising Control Unit, CompactFlash card

+ MultiAxes Package license).

You can instead order the Control Unit and CompactFlash card

with MultiAxes Package license individually:

Example for SIMOTION D445-2 DP/PN:

• Control Unit: 6AU1445-2AD00-0AA0

• CompactFlash card with MultiAxes Package license:

6AU1400-2PA22-0AA0 -Z M44

MultiAxes Packages

The MultiAxes Packages support particularly simple licensing.

They contain the license for unlimited use of the POS/GEAR/

CAM technology functions on the SIMOTION D Control Unit.

MultiAxes and Safety Packages

In addition to unlimited use of the axes licenses, the MultiAxes

and Safety Packages also contain the licenses of the Safety

Integrated Extended functions for all integrated SINAMICS

drives (SIMOTION D and Controller Extensions CX32-2).

Description Order No.

SIMOTION D425-2 DP

Control Unit

incl. double fan/battery module and

battery

(SIMOTION V4.3 SP1 or higher)

6AU1425-2AA00-0AA0

SIMOTION D425-2 DP/PN

Control Unit

incl. double fan/battery module and

battery

(SIMOTION V4.3 SP1 or higher)

6AU1425-2AD00-0AA0

SIMOTION D435-2 DP

Control Unit

incl. double fan/battery module and

battery

(SIMOTION V4.3 SP1 or higher)

6AU1435-2AA00-0AA0

SIMOTION D435-2 DP/PN

Control Unit

incl. double fan/battery module and

battery

(SIMOTION V4.3 SP1 or higher)

6AU1435-2AD00-0AA0

SIMOTION D445-2 DP/PN

Control Unit

incl. double fan/battery module and

battery

(SIMOTION V4.2 SP1 or higher)

6AU1445-2AD00-0AA0

SIMOTION D455-2 DP/PN

Control Unit

incl. double fan/battery module and

battery

(SIMOTION V4.2 SP1 or higher)

6AU1455-2AD00-0AA0

CompactFlash card (CF)

1 GB for SIMOTION D4x5-2

with the current SIMOTION Kernel and

SINAMICS S120 drive software V4.x

Pre-installed license can be obtained

using additional order codes 1)

Note:

A separate CompactFlash card is

available for the SIMOTION D410-2

Control Units (6AU1400-1PA22-0AA0).

6AU1400-2PA22-0AA0

MultiAxes Package license for

SIMOTION D425-x

• As Z option M42

• As Z option incl.

Safety Extended Functions S42

• As single license 6AU1820-0AA42-0AB0

• As single license incl.

Safety Extended Functions 6AU1820-0AS42-0AB0

MultiAxes Package license for

SIMOTION D435-x

• As Z option M43

• As Z option incl.

Safety Extended Functions S43

• As single license 6AU1820-0AA43-0AB0

• As single license incl.

Safety Extended Functions 6AU1820-0AS43-0AB0

MultiAxes Package license for

SIMOTION D445-x/D455-x

• As Z option M44

• As Z option incl.

Safety Extended Functions S44

• As single license 6AU1820-0AA44-0AB0

• As single license incl.

Safety Extended Functions 6AU1820-0AS44-0AB0

Description Order No.

1) Note about licenses for runtime software:

Runtime software licenses can either be pre-installed on a

CompactFlash card (CF) or ordered separately.

See Ordering of licenses for runtime software on page 9/63.

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/51

Siemens PM 21 · 2013

■

Accessories

■

More information

• about PROFIBUS DP/MPI cables and MOTION-CONNECT

can be found in chapter MOTION-CONNECT connection

systems.

• about PROFIBUS DP, Industrial Ethernet and PROFINET

can be found in Catalog IK PI and the Industry Mall under

Automation Technology/Industrial Communication as well as

the chapter Communication.

• about the ordering data for other SINAMICS drive components

such as Line Modules, Motor Modules, DRIVE-CLiQ cables,

etc. can be found in chapter SINAMICS S120 drive system

and the Industry Mall under Drive Technology/Converters/...

Integrated drive control

The drive control integrated in the SIMOTION D4x5-2 Control

Units is based on the drive control of a SINAMICS S120

CU320-2 Control Unit (firmware version V4.x), whereby there are

minor functional differences. For example, the integrated drive

control does not have a basic positioner function (EPos), since

this is already covered by SIMOTION technology functions.

For more information, refer to chapter System description –

Dimensioning and the documentation for SIMOTION and

SINAMICS.

SIZER for Siemens Drives engineering tool

With the SIZER for Siemens Drives engineering tool, you can

easily configure the SINAMICS S110/S120 drive families includ-

ing SIMOTION. It provides you with support for selecting and

dimensioning the components for a Motion Control task. You can

also determine the possible number of axes and the resulting

utilization with SIZER for Siemens Drives in accordance with your

performance requirements.

For more information about SIZER for Siemens Drives, refer to

chapter System description – Dimensioning.

Description Order No.

Accessories for SIMOTION D4x5-2

Double fan/battery module

incl. battery

Spare part for SIMOTION D4x5-2

6FC5348-0AA02-0AA0

Battery

Spare part for fan/battery module 6FC5247-0AA18-0AA0

Seal for external air cooling

(1 pack = 10 units)

With external air cooling, the cooling

fins of the Control Unit are outside of the

control cabinet.

A seal is required so that the

D445-2/D455-2 can be hermetically

mounted in the rear cabinet panel.

6FC5348-0AA07-0AA0

Accessories for PROFIBUS

PROFIBUS RS485 bus connector with

angular cable outlet (35°) and

screw-type terminals

Max. transmission rate 12 Mbit/s

• Without PG interface 6ES7972-0BA42-0XA0

• With PG interface 6ES7972-0BB42-0XA0

PROFIBUS Fast Connect RS485 bus

connector with angular cable outlet

(35°) and insulation displacement

terminals

Max. transmission rate 12 Mbit/s

• Without PG interface 6ES7972-0BA60-0XA0

• With PG interface 6ES7972-0BB60-0XA0

PROFIBUS adapter plug

for raising the PROFIBUS connector to

create more wiring space

6FX2003-0BB00

Accessories for PROFINET (interface X150)

RJ45 FastConnect connector for

Industrial Ethernet/PROFINET

145° cable outlet

(10/100 Mbit/s)

• 1 pack = 1 unit 6GK1901-1BB30-0AA0

• 1 pack = 10 units 6GK1901-1BB30-0AB0

• 1 pack = 50 units 6GK1901-1BB30-0AE0

FastConnect cables for

Industrial Ethernet/PROFINET 1)

• IE FC standard cable GP 2x2 6XV1840-2AH10

• IE FC flexible cable GP 2x2 6XV1870-2B

• IE FC trailing cable GP 2x2 6XV1870-2D

• IE FC trailing cable 2x2 6XV1840-3AH10

• IE FC marine cable 2x2 6XV1840-4AH10

Stripping tool for

Industrial Ethernet/PROFINET

FastConnect cables

• IE FC stripping tool 6GK1901-1GA00

Description Order No.

Accessory for Industrial Ethernet (interface X120, X127, X130)

RJ45 FastConnect connector for

Industrial Ethernet/PROFINET

180° cable outlet

(10/100/1000 Mbit/s)

• 1 pack = 1 unit 6GK1901-1BB11-2AA0

• 1 pack = 10 units 6GK1901-1BB11-2AB0

• 1 pack = 50 units 6GK1901-1BB11-2AE0

FastConnect cables for Industrial

Ethernet/PROFINET 1)

• IE FC Standard Cable GP 4x2 6XV1878-2A

• IE FC Flexible Cable GP 4x2 6XV1878-2B

Stripping tool for Industrial Ethernet/

PROFINET FastConnect cables

• IE FC stripping tool 6GK1901-1GA00

Other accessories

Dust-proof blanking plugs

(50 units) for sealing unused

DRIVE-CLiQ, Ethernet and

PROFINET ports

6SL3066-4CA00-0AA0

1) Sold by the meter; max. length 1000 m (3281 ft); minimum order

20 m (65.62 ft).

SIMOTION Motion Control System

SIMOTION D — Drive-based

SIMOTION D4x5-2 Control Units

9/52 Siemens PM 21 · 2013

■

More information (continued)

Connectors and cables

The adapter plug (Order No. 6FX2003-0BB00) is required for

D4x5-2 when the bus cable has to be looped through the left-

hand PROFIBUS interface (X126; 2 PROFIBUS cables wired to

the plug) and also

• Ethernet interface X120, in the case of D4x5-2 DP or

• Port 3 of the PROFINET interface X150 in the case of

D4x5-2 DP/PN

has to be wired to a FastConnect plug. With the adapter plug

fitted, the PROFIBUS connector is higher which creates extra

wiring space.

Ethernet interfaces X120, X127 and X130 support 10, 100 and

1000 Mbit/s. For 1000 Mbit/s, 8-core cables (4x2) must be used

as well as the 1000 Mbit version of the 180° FastConnect plug.

The 145° FastConnect plugs cannot be used for Ethernet inter-

face X130 (cable outlet downwards). They also only support a

maximum of 100 Mbit/s.

SIMOTION Motion Control System

SIMOTION D — Drive-based

Supplementary components

SIMOTION CX32-2 Controller Extension

9/53

Siemens PM 21 · 2013

■

Overview

The SIMOTION CX32-2 Controller Extension is a module in

SINAMICS S120 booksize format. It enables the extension of the

drive-side computing performance of the SIMOTION D4x5-2

Control Units.

The integrated drive computing performance enables the

SIMOTION D4x5-2 Control Units to operate up to 6 servo,

6 vector or 12 V/f axes.

The SIMOTION CX32-2 Controller Extension extends the drive

computing performance by up to 6 additional servo, 6 vector or

12 V/f axes. This allows the number of axes of a multi-axis

system to be increased according to the requirements of the

application.

If required, several CX32-2 Controller Extensions can be

operated on one SIMOTION D4x5-2 Control Unit.

■

Benefits

7With a width of 25 mm (0.98 in), the CX32-2 Controller

Extension requires very little space and is therefore well-suited

for use in compact machines.

7The CX32-2 Controller Extension is connected to the

SIMOTION D4x5-2 via DRIVE-CLiQ, so high-performance,

isochronous closed-loop control of the drives is possible

without the need for additional modules. The communication

interfaces on the SIMOTION D4x5-2 remain available for other

connections.

7The addressing of the Controller Extension is independent

of the addressing on PROFIBUS/PROFINET. This is advanta-

geous for modular machine concepts.

7Simple cabling and configuration

7The "Control operation" signal from an infeed connected to the

SIMOTION D4x5-2 is particularly easy to interconnect to the

drives of the CX32-2 Controller Extension.

7The CX32-2 Controller Extension does not require its own

CompactFlash card. Data is managed centrally on the

CompactFlash card of the SIMOTION D4x5-2 Control Unit.

This has the following advantages:

- Simple module replacement (no operator action required on

the CX32-2, such as memory card replacement)

- During firmware upgrades, the CX32-2 Controller Extension

is automatically upgraded with the integrated drive of the

SIMOTION D4x5-2 Control Unit

- Central license handling via the SIMOTION D4x5-2

■

Design

Example: Axis grouping for 12 axes with SIMOTION D4x5-2 and

SIMOTION CX32-2 Controller Extension

The SIMOTION CX32-2 Controller Extension is connected to the

SIMOTION D4x5-2 via DRIVE-CLiQ.

In this way, a very compact axis grouping can be implemented,

for example, with 12 servo axes.

If required, several SIMOTION CX32-2 Controller Extensions can

be operated on one SIMOTION D4x5-2 Control Unit.

• Max. 3 CX32-2 units on one SIMOTION D425-2

• Max. 5 CX32-2 units on one SIMOTION D435-2, D445-2 or

D455-2

In principle, a 4th or 6th CX32-2 Controller Extension can also

be connected. In this case, no drives / drive components can

be connected any longer to the integrated drive control of the

SIMOTION D4x5-2. All drives must then be operated via the

connected Controller Extensions. This can be useful, for

example, when implementing distributed, modular machine

concepts .

Additional drive controls can be implemented with

SINAMICS S110/S120 Control Units via PROFIBUS or

PROFINET.

Note

The SIMOTION CX32-2 Controller Extension can only be used

with SIMOTION D4x5-2 Control Units. Operation with

SIMOTION D4x5 Control Units is not possible.

The SIMOTION CX32 Controller Extension should be used for

the SIMOTION D435 and D445-1 Control Units

(Order No. 6SL3040-0NA00-0AA0).

CX32-2

D4x5-2

DRIVE-CLiQ

Additional axes controlled

via SIMOTION CX32-2

Axes controlled via

SIMOTION D4x5-2

G_PM10_EN_0000207a

SIMOTION Motion Control System

SIMOTION D — Drive-based

Supplementary components

SIMOTION CX32-2 Controller Extension

9/54 Siemens PM 21 · 2013

■

Technical specifications

Order No. 6AU1432-2AA00-0AA0

Product brand name SIMOTION

Product-type designation CX32-2

Version of the motion

control system Controller Extension

Integrated drive control

Maximum number of axes for

integrated drive control

• servo 6

•vector 6

•V/f 12

•remark Alternative control modes;

drive control based on

SINAMICS S120 CU320-2,

firmware version V4.x

Communication

DRIVE-CLiQ interfaces 4

General technical data

Fan No fan

DC supply voltage

• rated value V24

• permissible range V20.4 … 28.8

Current consumption, typ. mA 300

•remark Without load at the inputs/

outputs, without 24 V supply

via DRIVE-CLiQ interface

Making current, typ. A1.6

Power loss, typ. W 7

Ambient temperature

• during long-term storage °C (°F) -25 ... +55 (-13 ... +131)

• during transport °C (°F) -40 ... +70 (-40 ... +158)

• during operating °C (°F) 0 ... +55 (+32 ... +131)

-remark Maximum installation

altitude 4000 m (13124 ft)

above sea level. Above an

altitude of 2000 (6562 ft),

the maximum ambient

temperature decreases

by 7° C (44.6 °F) per

1000 m (3281 ft).

Relative humidity without

condensation during

operating phase

%5…95

Air pressure hPa 620…1060

Protection class IP IP20

Height mm (in) 380 (14.96)

Width mm (in) 25 (0.98)

Depth mm (in) 270 (10.63)

•remark When the spacer is removed

230 mm (9.05 in) deep

Net weight g (lb) 2600 (5.73)

Digital inputs

Number of digital inputs 6

DC input voltage

• rated value V24

• for signal "1" V15 … 30

• for signal "0" V-3 … +5

Digital inputs (continued)

Electrical isolation Yes

•remark in groups of 6

Current consumption for

"1" signal level, typ. mA 9

Input delay for

• signal "0" → "1", typ. µs 50

• signal "1" → "0", typ. µs 150

Digital inputs/outputs

Number of digital

inputs/outputs 4

Parameterization possibility

of the digital inputs/outputs Parameterizable as DI, as

DO, as measuring input

(max. 4)

If used as an input

DC input voltage

• rated value V24

• for signal "1" V15 … 30

• for signal "0" V-3 … +5

Electrical isolation No

Current consumption for

"1" signal level, typ. mA 9

Input delay for

• signal "0" → "1", typ. µs 5

• signal "1" → "0", typ. µs 50

Measuring input,

reproducibility µs 5

Measuring input,

resolution µs 1

If used as an output

Load voltage

• rated value V24

• permissible range V20.4 … 28.8

Electrical isolation No

Current carrying capacity for

each output, max. mA 500

Leakage current, max. mA 2

Output delay for

• signal "0" → "1", typ. µs 150

• signal "0" → "1", max. µs 400

• signal "1" → "0", typ. µs 75

• signal "1" → "0", max. µs 100

-remark Data for Vcc = 24 V;

load 48 Ohm;

"1" = 90 % VOut,

"0" = 10 % VOut

Order No. 6AU1432-2AA00-0AA0

Product brand name SIMOTION

Product-type designation CX32-2

SIMOTION Motion Control System

SIMOTION D — Drive-based

Supplementary components

SIMOTION CX32-2 Controller Extension

9/55

Siemens PM 21 · 2013

■

Technical specifications (continued)

■

Selection and ordering data

Order No. 6AU1432-2AA00-0AA0

Product brand name SIMOTION

Product-type designation CX32-2

If used as an output (continued)

Switching frequency of

the outputs for

• ohmic load, max. Hz 100

• inductive load, max. Hz 2

• lamp load, max. Hz 11

Short-circuit protection Yes

Additional technical data

Backup of non-volatile data

• Backup of retentive data Unlimited buffer duration

Approvals

•USA UL 61010-1, 2nd Ed.

CAN/CSA-C22.2

NO. 61010-1-04

• Canada UL 61010-1, 2nd Ed.

CAN/CSA-C22.2

NO. 61010-1-04

• Australia C-Tick

Description Order No.

SIMOTION CX32-2

Controller Extension

for SIMOTION D4x5-2

6AU1432-2AA00-0AA0

SIMOTION Motion Control System

SIMOTION D — Drive-based

Supplementary components

CBE30-2 Communication Board

9/56 Siemens PM 21 · 2013

■

Overview

The CBE30-2 Communication Board can be used to provide the

SIMOTION D4x5-2 DP/PN with a second PROFINET interface.

■

Application

Applications for a second PROFINET interface are as follows:

• 2 separate networks (e.g. one local and one higher-level

network)

• Address space can be doubled to 2 × 4 KB

• Maximum number of connectable devices can be doubled to

2×64

• Separation into a high-speed and a slow bus system/

execution system in order to make efficient use of the

controller's capacity (applies only to

SIMOTION D435-2 DP/PN, D445-2 DP/PN and

D455-2 DP/PN)

■

Function

The CBE30-2 Communication Board provides the following

functions:

• PROFINET IO controller, I-Device (also controller and device

simultaneously)

• 100 Mbit/s full-duplex/autocrossing

• Supports real-time classes of PROFINET IO:

- RT (Real-Time)

- IRT (Isochronous Real Time)

• Integration of distributed I/O as PROFINET IO devices

• Integration of drives as PROFINET IO devices through

PROFIdrive according to the V4 specification

• Support for standard Ethernet communication, e.g.

- for interfacing with SIMOTION SCOUT

- for the connection of HMI systems

- for communication with any other devices over TCP/IP or

UDP communication

• Integrated 4-port switch with four RJ45 sockets. The optimum

topology (line, star, tree) can therefore be configured without

additional external switches.

• Support of media redundancy (MRP/MRPD).

■

Integration

The CBE30-2 Communication Board is plugged into the option

slot on the SIMOTION D4x5-2 DP/PN.

Note

The CBE30-2 Communication Board can only be used with the

SIMOTION D4x5-2 DP/PN Control Units.

It is not compatible with SIMOTION D425, D435, D445-1 and

D4x5-2 DP.

■

Technical specifications

■

Selection and ordering data

■

Accessories

■

More information

More information about FastConnect cables can be found in

Catalog IK PI (Industrial Communication) and the Industry Mall

under Automation Technology/Industrial Communication/

Industrial Ethernet/Cabling technology/...

CBE30-2 Communication Board

Current requirement at 24 V DC 0.25 A

Permissible ambient temperature

• Storage and transport -40 … +70 °C

(-40 ... +158 °F)

• Operation 0 … 55 °C

(32 ... 131 °F)

Weight, approx. 100 g (0.22 lb)

Dimensions (W × H × D) 25×95×143mm

(0.98 × 3.74 × 5.63 in)

Approvals, according to cULus

Description Order No.

CBE30-2 Communication Board

For SIMOTION D4x5-2 DP/PN

(SIMOTION V4.3 SP1 or higher)

6FC5312-0FA00-2AA0

Description Order No.

RJ45 FastConnect connector for

Industrial Ethernet/PROFINET

• 145° cable outlet

(10/100 Mbit/s)

- 1 pack = 1 unit 6GK1901-1BB30-0AA0

- 1 pack = 10 units 6GK1901-1BB30-0AB0

- 1 pack = 50 units 6GK1901-1BB30-0AE0

FastConnect cables for

Industrial Ethernet/PROFINET 1)

• IE FC Standard Cable GP 2x2 6XV1840-2AH10

• IE FC Flexible Cable GP 2x2 6XV1870-2B

• IE FC Trailing Cable GP 2x2 6XV1870-2D

• IE FC Trailing Cable 2x2 6XV1840-3AH10

• IE FC Marine Cable 2x2 6XV1840-4AH10

Stripping tool for

Industrial Ethernet/PROFINET

FastConnect cables

• IE FC stripping tool 6GK1901-1GA00

1) Sold by the meter; max. length 1000 m (3281 ft);

minimum order 20 m (65.62 ft).

SIMOTION Motion Control System

SIMOTION software

Overview of SIMOTION software

9/57

Siemens PM 21 · 2013

■

Overview

SIMOTION – The scalable system platform for

Motion Control applications

The SIMOTION system has created a scalable system platform

for automation tasks, particularly Motion Control applications.

The scalability of the system allows you to implement tailor-made

and economic applications.

The modular SIMOTION software is perfectly integrated and

offers easy-to-use functions for all phases of the automation

process.

SIMOTION – Software for runtime, engineering and

commissioning

The software for SIMOTION is divided into the following

categories:

Runtime software

SIMOTION Kernel – Basic functionality

The SIMOTION Kernel provides the basic functionality and is a

component of all SIMOTION devices.

SIMOTION technology packages

The SIMOTION technology packages support modular

expansion of the functionality.

SIMOTION IT – Service and diagnostics functions

Supports simple diagnostics, service or HMI applications

without SIMOTION SCOUT.

Engineering software

• SIMOTION SCOUT engineering software (with integrated

STARTER commissioning tool)

• Optional CamTool package (cam editor)

• Optional Drive Control Chart (DCC) package

The SCOUT engineering system provides high-performance

tools that provide simple, optimal support for all engineering

steps required in the context of machine automation.

The SIMOTION CamTool is available as an optional package

which permits simple creation of cams.

The optional Drive Control Chart package is available for easy

graphical configuration of technology functions using pre-

defined function blocks (Drive Control Blocks DCB).

The SCOUT engineering system can be used in

SIMATIC STEP 7, either with integrated data management and

configuration, or as a stand-alone engineering tool.

Supplementary software

In addition to the SIMOTION software, other standard software

products are available, for example, for easy programming of

HMIs on Operator, Touch or Multi Panels, as well as Panel PCs

or PC systems.

SIMATIC HMI software

Optional software packages are:

• WinCC flexible for easy configuration of HMIs on Operator,

Touch or Multi Panels, as well as Panel PCs or PC systems

(integration of WinCC flexible is possible in SCOUT)

• SCADA system WinCC: PC-based operator control and

monitoring system for visualizing and operating production

processes.

• SIMATIC NET for implementing HMI over OPC in Windows

environments.

Further optional SIMATIC software

• SIMATIC Logon for user administration in projects with

specific support for validation processes, for example, in the

pharmaceutical industry.

• SIMATIC Version Trail for the easy versioning of projects

(SIMATIC Logon is required).

SIMOTION Utilities & Applications

The SIMOTION Utilities & Applications DVD, which is available

free of charge, supplements the SIMOTION software with a wide

range of valuable information and tools for SIMOTION applica-

tions as well as SIMOTION easyProject.

The project generator SIMOTION easyProject enables basic and

modular machine functions to be integrated into SCOUT

engineering projects.

■

More information

Security note

In the case of software for remote maintenance or connection to

higher-level networks, suitable protection measures must be

taken (including IT security, e.g. network segmentation) to

guarantee safe operation of the system. You can find more

information on Industrial Security on the Internet at:

www.siemens.com/industrialsecurity

SIMOTION Motion Control System

SIMOTION runtime software

Overview of runtime software

9/58 Siemens PM 21 · 2013

■

Overview

Software structure of a SIMOTION application

SIMOTION Kernel – Basic functionality

The basic functionalities of the SIMOTION devices are

combined within the SIMOTION Kernel.

The SIMOTION Kernel provides, among other features,

high-performance functions for

• PLC functionality (according to IEC 61131-3)

• Program control

• Timers, counters

• I/O operation

• Communication

It also provides a powerful runtime system with

• Cyclical (synchronized and cyclic) tasks

• Sequential tasks

• Time-driven tasks

• Event-driven tasks

The scope of the language conforms to the IEC 61131-3 stan-

dard and contains all PLC commands required for I/O manage-

ment, process and machine control. LAD (Ladder Diagram),

FBD (Function Block Diagram), ST (Structured Text), MCC

(Motion Control Chart) and Drive Control Chart (DCC) are used

for programming.

The SIMOTION Kernel basic functionality can be expanded by

loading SIMOTION technology packages.

SIMOTION technology packages

SIMOTION technology packages combine software functions

which are required for automation in mechanical engineering in

a very wide variety of sectors. They are loaded into the controller

during configuration and expand the basic functionality through

additional system functions. The functions of the technology

packages can be accessed in the SCOUT command library

during engineering.

The technology packages enable the generation of technologi-

cal objects, e.g. technology object "positioning axis", which are

all set up, configured and parameterized by the same method.

I/O

Sensors, Actuators

Function Libraries

Drives

SIMOTION Kernel Basic Functionality

Customized

SIMOTION Applications

Customized SIMOTION application

SIMOTION Kernel

Function Libraries

Technology Packages

User Program

Functionality in

accordance with

IEC 61131-3

System Functions

(Operating System, I/O Handling, Communications)

Additional

Automation

Components

Additional

Technology Packages

Technology Package

Motion Control

Flexible, Scalable Functionality

G_PM10_EN_00006a

SIMOTION

User Program

SIMOTION Motion Control System

SIMOTION runtime software

Overview of runtime software

9/59

Siemens PM 21 · 2013

■

Overview (continued)

Motion Control technology package

The comprehensive motion control functions in this technology

package offer very open and flexible ways of programming

applications and provide users with the assurance that they can

implement even complex motion control applications.

The SIMOTION Motion Control technology package contains the

following functions:

• Motion Control Basic

• POS – Positioning

• GEAR – Synchronous operation/electronic

•CAM – Cam

• PATH – Path interpolation

• Supplementary technology functions

The technology object functions in the technology package

are accessed via additional language commands and system

variables, as well as with function blocks in accordance with

PLCopen. Programming of motion sequences is therefore

simple and integrated.

Technology package for temperature control (TControl)

The SIMOTION technology package for temperature control

provides temperature channels with extensive functions. These

functions are also accessed via additional language commands

and system variables.

Technology package for Drive Control Chart (DCC)

The SIMOTION technology package for Drive Control Chart

(DCC) provides a library of "Drive Control Blocks" (DCBs). These

blocks can be used to graphically configure open and closed-

loop control functions using an optional DCC editor that can be

integrated into SCOUT.

Technology package Multipurpose Information Interface

(MIIF)

The SIMOTION technology package MIIF functions as a server

to permit symbolic access to SIMOTION data and makes them

available to clients (e.g. operator panel) via Ethernet.

SIMOTION function libraries for I/O interfacing

These function libraries contain standard functions for integrat-

ing intelligent I/O and communication modules. They are a

component part of the SCOUT command library and make it

extremely easy to integrate modules such as FM 350-1/-2,

FM 352, CP 340/341, SIWAREX FTA or identification systems

into the SIMOTION user program. Programming examples and

standard applications are also available in the SIMOTION

Utilities & Applications. The SIMOTION Utilities & Applications

are supplied free of charge with SCOUT.

SIMOTION user program

In the SIMOTION user program, the functions of the technology

packages, function libraries and functions of the SIMOTION

Kernel are accessed in a uniform manner by means of language

commands.

The structure of the SIMOTION application program therefore

supports merging of PLC functions with motion control functions

and technology functions. This simplifies the optimization of

motion sequences (no PLC/Motion interface), reducing engi-

neering costs and increases both product quality and machine

productivity (machine cycle and output) by eliminating inter-

faces and dead times.

A SIMOTION application can be programmed in different ways:

• The graphical programming languages LAD (Ladder

Diagram), FBD (Function Block Diagram) and MCC

(Motion Control Chart) make graphical programming

user-friendly.

• Programming can also be performed textually, using

Structured Text (ST).

• Using the optional technology package for Drive Control Chart

(DCC), drive-based open and closed-loop control functions

can be easily configured graphically.

Direct access to the drive allows:

• Increased uniformity and integration depth as far as the drive

(access to control/status words and drive data, flexible torque

limits, additive torque setpoint)

• Highly-dynamic applications with servo drives thanks to DSC

(Dynamic Servo Control) allows position control cycles of

125 µs

• Highly dynamic applications with hydraulic drives with

position control cycles and pressure/force control cycles of

250 µs

• Synchronization with drives and modular open-loop controls

Apart from electrical drives, hydraulic drives within a controller

or distributed over several controllers can be synchronized with

each other. This supports the implementation of integrated auto-

mation solutions such as conveyor systems and press lines in

the automotive industry, in which both electrical drives (winders,

cross cutters, roller feeds) and hydraulic drives (e.g. deep-

drawing presses) are implemented in the same system.

SIMOTION isochronous mode

In the SIMOTION system, all the components (one or more con-

trol units, drives, isochronous I/Os) are synchronized to the com-

munication cycle of the machine, the PROFIBUS DP/PROFINET

cycle. The application is also synchronized with this cycle

through synchronous application tasks (in the servo and inter-

polator cycle). Isochronous mode therefore permeates the

whole machine application (also in the case of distributed

systems) and this provides considerable advantages:

• Short response times from terminal to terminal and terminal

to axis

• High machine cycle times

• Programming of synchronous closed-loop control tasks

• High product quality thanks to a deterministic and

reproducible machine response

SIMOTION Motion Control System

SIMOTION runtime software

Overview of runtime software

9/60 Siemens PM 21 · 2013

■

Overview (continued)

Modular concepts – Modular machines

SIMOTION supports modular machine concepts and thus

reduces engineering and commissioning costs through:

• Modular software development with libraries and reusable

code

• Division into individual machine modules, which are linked, for

example, through distributed synchronous operation (over

PROFIBUS DP or PROFINET IO with IRT). Based on a maxi-

mum project, the project can be reconfigured, for example,

using HMI

• Activation/deactivation of DP slaves/PROFINET IO devices

(I/O components) and technology objects (drives, axes, exter-

nal encoders, and cams) during engineering and at runtime

• Easy, modular configuration of projects using the project

generator SIMOTION easyProject

The modular machine concept means scalable solutions and

large axis line-ups to be achieved. Standardized modules can

be easily adapted to special requirements and separately

tested. These modules are then easily combined to form

individual machine variants.

Communication via PROFIBUS

The communication functions are available via PROFIBUS on

all platforms:

• I/O communication between SIMOTION and/or SIMATIC

controllers

• Communication with programming devices (programming

device functions)

• Communication with WinCC flexible

• Communication with PCs on which SIMATIC NET OPC is

installed.

A prerequisite on the PC side is the

SIMATIC NET SOFTNET S7 software.

Communication using Ethernet/PROFINET

The communication functions below are available via Ethernet

on all platforms:

• I/O communication between SIMOTION and/or SIMATIC

controllers

• Communication with SIMOTION devices, SIMATIC CPUs and

non-Siemens devices via UDP and TCP/IP

• Communication with programming devices (programming

device functions)

• Communication with WinCC flexible

• Communication through the SCADA system WinCC.

• Communication with PCs on which SIMATIC NET OPC is

installed.

A prerequisite on the PC side is the

SIMATIC NET SOFTNET S7 software.

SIMOTION IT

SIMOTION IT enables additional communication functions via

Industrial Ethernet (HTML over standard Internet browser):

• Diagnostics functions via SIMOTION IT DIAG

• Communication via SIMOTION IT OPC XML-DA

• SIMOTION IT Virtual Machine: Creation of Java applications

for SIMOTION.

SIMOTION Motion Control System

SIMOTION runtime software

Runtime software licensing

Overview of the licensing concept

9/61

Siemens PM 21 · 2013

■

Overview

The basic concept: "pay only for what you need"

The functionally scalable licenses for SIMOTION runtime soft-

ware and axis-specific licensing result in a simple pricing

structure, allowing you to only pay for what you really need.

Runtime licenses are not bound to specific versions and are

therefore valid for all firmware versions. In case of a firmware

update the runtime licenses remain valid. The license key

generated from the runtime licenses and the serial number of the

memory card or SIMOTION P is stored on the memory card or

on SIMOTION P.

How can licenses be obtained for runtime software?

Licenses for SIMOTION runtime software can be obtained as

follows:

• Pre-installed licenses can be ordered when purchasing a

SIMOTION memory card (SIMOTION C, D) or for SIMOTION P.

The order number is expanded with one or more additional

order codes (Z options) that specify the required licenses.

Alternatively, pre-installed runtime licenses can be ordered

using the configurator for SIMOTION runtime licenses in the

Industry Mall.

Homepage: www.siemens.com/industrymall

• Licenses can be ordered separately, independently of pur-

chase of a SIMOTION controller or a SIMOTION memory card.

The required software options are assigned to hardware

(memory cards or SIMOTION P) by generating a license key

over the Internet at:

Homepage: www.siemens.com/automation/license

When do licenses need to be obtained for runtime software?

When configuring using SIMOTION SCOUT, the required

licenses are displayed.

A license is required for the runtime software:

• When it is used in a machine or a machine component before

it is supplied by the manufacturer

• When it is used by the customer on completion of initial

commissioning

• When it is retrofitted following completion of initial

commissioning

• In large-scale plants that are installed directly at the

production site without previous initial commissioning by

the manufacturer, on completion of initial commissioning

before test operation commences.

Unlicensed basic functions

The rights of use for these software components are included

when the basic unit is purchased:

• SIMOTION Kernel runtime software

The SIMOTION Kernel is already installed on the device.

• Motion Control Basic technology functions

Use of technology functions for speed-controlled axes, single

output cams and cam tracks, measuring inputs and external

encoders.

• Technology functions for Drive Control Chart

By installing the optional SCOUT package Drive Control Chart,

the technology functions of Drive Control Chart are made

available to the SIMOTION runtime system.

• Supplementary technology functions

Use of supplementary technology functions, such as adders,

formula objects and fixed gears.

• Function libraries for I/O interfacing

• Communication functions

This covers SIMATIC S7 communication functions on the

SIMOTION side (PG/OP communication to programming

devices, for engineering and communication to TPs/OPs/MPs

and PCs with SIMATIC HMI, e.g. WinCC flexible,

SIMATIC NET OPC, SIMOTION IT DIAG and

SIMOTION IT OPC XML-DA), as well as UDP and TCP/IP

communication.

Motion Control technology functions under license

The Motion Control Basic technology functions can be used

without a license. When other technology functions of the Motion

Control technology package are used, a license is required for

each axis used. Licenses are only necessary for real axes;

virtual axes and speed-controlled axes are not subject to

license. A license is obtained for the different axis types using

a separate order number for each.

POS, GEAR, CAM axis licenses

Three different axis licenses are available:

• POS – Use of the positioning technology function for a created

positioning axis

• GEAR – Use of the positioning and synchronous operation

technology functions for a created synchronous axis as well

as additional path interpolation for a created path axis

• CAM – Use of the positioning, synchronous operation, path

interpolation and cam technology functions for a created

synchronous axis with cam

MultiAxes Packages

The platform-independent MultiAxes Package supports particu-

larly simple licensing. It contains the license for unlimited use

of the POS/GEAR/CAM technology functions on one

SIMOTION Controller. Variably priced, platform-specific

packages for C2xx, P320-3, P350-3 or D410-2, D425-x, D435-x

and D445-x/D455-x are offered in addition to the platform-

independent MultiAxes Package.

SIMOTION Motion Control System

SIMOTION runtime software

Runtime software licensing

Overview of the licensing concept

9/62 Siemens PM 21 · 2013

■

Overview (continued)

Other technology functions which are subject to a license

TControl technology functions

The functions of the TControl technology package must be

licensed for specific channels in packages, each package

containing 8 temperature channels.

Multipurpose Information Interface (MIIF) technology functions

To use the functions of the MIIF technology package, a separate

license must be obtained for each SIMOTION Controller.

SIMOTION IT communication functions

For version V4.2 and higher of SIMOTION Kernel, a license need

be purchased only to cover the use of SIMOTION IT Virtual

Machine. The licenses for SIMOTION IT DIAG and

SIMOTION IT OPC XML-DA are no longer required.

The license SIMOTION IT Virtual Machine can continue to be

used as a combined license for SIMOTION IT DIAG,

OPC XML-DA and Virtual Machine in the case of version V4.2

and lower of SIMOTION Kernel.

Safety Integrated functions for SINAMICS S120 which are

subject to license

SINAMICS S120 drives with safety functions can be integrated

into a SIMOTION D application.

The following must be noted with regard to use of Safety

Integrated functions:

• The Safety Integrated basic functions are unlicensed.

• A license is, however, required for each axis with safety func-

tions in the case of Safety Integrated Extended Functions.

• MultiAxes and Safety Packages are available for

SIMOTION D4x5-x that, in addition to unlimited use of the axes

licenses, also contain the licenses of the Safety Integrated

Extended functions for all integrated SINAMICS drives

(SIMOTION D and Controller Extensions CX32-2).

Note regarding SIMOTION D410-2

SIMOTION D410-2 has an integrated drive control for either a

servo, a vector or a V/f axis and is therefore ideal for single-axis

applications.

One real axis can be used without license on the Control Unit.

Speed-controlled axes and virtual axes never require a license.

SIMOTION D410-2 can be extended with additional

SINAMICS S110/S120 Control Units (e.g. CU305) and so can

also be used for smaller multi-axis applications (e.g. with 2 to 3

axes). A license is required for any additional axes. Where a

license is required for a POS axis, the POS single-axis license is

the ideal solution; it is better to use the MultiAxes Package

D410-2 in the case of GEAR/CAM or more than one POS license.

The axis license with the highest functionality is covered by the

inclusive license (a real axis).

The functionality has the following granularity:

CAM > GEAR > POS.

Example:

Application with 2 real axes: 1 POS, 1 CAM.

Only a POS license needs to be purchased because the

higher-order CAM license is already included.

Licenses are also required for runtime functions subject to

licensing, such as SIMOTION IT Virtual Machine. These can be

pre-installed on the CompactFlash card (CF card) or ordered

separately.

SIMOTION Motion Control System

SIMOTION runtime software

Runtime software licensing

Ordering of licenses for runtime software

9/63

Siemens PM 21 · 2013

■

Overview

Runtime licenses for SIMOTION C and D

For SIMOTION C and D, licenses for runtime software can be

ordered individually or as pre-installed software

(by order code/Z option) on memory card.

In both cases, the license certificate is enclosed.

Runtime licenses for SIMOTION P

For SIMOTION P, licenses for runtime software can be ordered

individually or by means of order code (Z option).

When ordered by means of order code (Z option), the runtime

licenses are not pre-installed, the license certificate is enclosed.

Ordering individual licenses

The order numbers can be found in column "Single-user license"

in the ordering data table.

If several licenses of the same type are needed, e.g. 3 x POS

license, the order number must be repeated for each license.

Example:

A 1 GB CompactFlash card for SIMOTION D4x5-2 has been

purchased, but without pre-installed runtime licenses. During

the configuring process with SIMOTION SCOUT, a message is

displayed to indicate that the following runtime licenses are

needed: 1 x POS axis license, 1 x TControl license.

The ordering data table specifies the following:

• POS axis license: 6AU1820-1AA20-0AB0

• TControl license: 6AU1820-2AA20-0AB0

Ordering pre-installed licenses

To order pre-installed licenses on memory card, the type and

number of required licenses must be specified in the order using

order codes (Z options). These order codes are added to the

order number for the SIMOTION memory card.

Step 1: The order number of the SIMOTION memory card must

be stated first:

• Memory card for SIMOTION C:

Micro Memory Card 64 MB: 6AU1720-1KA00-0AA0

• Memory card for SIMOTION D410-2:

CompactFlash card 1 GB: 6AU1400-1PA22-0AA0

• Memory card for SIMOTION D4x5-2:

CompactFlash card 1 GB: 6AU1400-2PA22-0AA0

Step 2: The following order codes must be stated in order to

specify the type and quantity of required runtime licenses:

Each order code begins with the characters "-Z" and is listed in

the column headed "Order codes for pre-installed licenses" in

the ordering data table.

Example 1:

64 MB Micro Memory Card for SIMOTION C240 with

• MultiAxes Package license for SIMOTION C2xx:

Order No.: 6AU1720-1KA00-0AA0 -Z M24

Example 2:

1 GB CompactFlash card for SIMOTION D4x5-2 with

• 3 POS licenses

• 2 CAM licenses

• 1 TControl license and

• 1 SINAMICS Safety Integrated Extended Functions license:

Order No.: 6AU1400-2PA22-0AA0 -Z P03 C02 T01 F01

Configurator for runtime licenses

An electronic ordering configurator is available in the Industry

Mall for ordering SIMOTION hardware with corresponding

runtime licenses.

Homepage: www.siemens.com/industrymall

This will guide you step by step through the process of selecting

and ordering SIMOTION hardware with pre-installed runtime

licenses.

SIMOTION Motion Control System

SIMOTION runtime software

Runtime software licensing

Ordering of licenses for runtime software

9/64 Siemens PM 21 · 2013

■

Selection and ordering data

License type Single-user license

Order No. Order codes for

pre-installed licenses on

SIMOTION memory cards

Licensed

functions License

object Notes

Axis licenses

• POS axis license 6AU1820-1AA20-0AB0 Pxx – POS license and

quantity (e.g. P02 = 2

POS licenses)

Positioning Per axis In the case of

D410-2, required

only for 2 axes or

• GEAR axis license 6AU1820-1AB20-0AB0 Gxx – GEAR license and

quantity (e.g. G03 = 3

GEAR licenses)

Positioning,

synchronous

operation,

path interpolation

• CAM axis license 6AU1820-1AC20-0AB0 Cxx – CAM license and

quantity (e.g. C01 = 1

CAM license)

Positioning,

synchronous

operation,

path interpolation,

cam (all functions of

the Motion Control

technology package)

MultiAxes packages

•Platform-

independent 6AU1820-0AA20-0AB0 M00 – MultiAxes Package

license (platform-

independent)

Positioning,

synchronous

operation,

path interpolation,

cam (all functions of

the Motion Control

technology package)

Unlimited axes on

one controller

•For C2xx 6AU1820-0AA24-0AB0 M24 – MultiAxes Package

license for C2xx

•For P320-3 6AU1820-0AA32-0AB0 M32 – MultiAxes Package

license for P320-3

•For P350-3 6AU1820-0AA35-0AB0 M35 – MultiAxes Package

license for P350-3

•For D410-2 6AU1820-0AA41-0AB0 M41 – MultiAxes Package

license for D410-2

•For D425-x 6AU1820-0AA42-0AB0 M42 – MultiAxes Package

license for D425-x

•For D435-x

(incl. D425-x) 6AU1820-0AA43-0AB0 M43 – MultiAxes Package

license for D435-x

• For D445-x/D455-x

(incl. D435-x and

D425-x)

6AU1820-0AA44-0AB0 M44 – MultiAxes Package

license for D445-x/D455-x

MultiAxes and Safety Package

•For D425-x 6AU1820-0AS42-0AB0 S42 – MultiAxes license and

Safety Package for D425-x Positioning,

synchronous

operation,

path interpolation,

cam (all functions of

the Motion Control

technology package)

plus SINAMICS Safety

Integrated Extended

Functions for

SIMOTION D

Unlimited axes

(incl. SINAMICS

Safety Integrated

Extended Func-

tions) on one

controller

SINAMICS Safety

Integrated Extended

Functions for inte-

grated SINAMICS

drives with

SIMOTION D and

CX32-2 Controller

Extension

•For D435-x

(incl. D425-x) 6AU1820-0AS43-0AB0 S43 – MultiAxes license and

Safety Package for D435-x

• For D445-x/D455-x

(incl. D435-x and

D425-x)

6AU1820-0AS44-0AB0 S44 – MultiAxes license and

Safety Package for

D445-x/D455-x

Licenses for other technology packages / technology functions

•TControl 6AU1820-2AA20-0AB0 Txx – TControl license and

quantity (e.g. T03 = 3

TControl licenses)

Temperature

control 8 temperature

channels per

license

• MIIF (Multipurpose

Information

Interface)

6AU1820-3DA20-0AB0 B02 – MIIF license Multipurpose

Information Interface Per controller On one C2xx, P3xx

or D4xx-2

• Safety Integrated 6AU1820-2AF20-0AB0 Fxx – Safety license and

quantity (e.g. F02 = 2

Safety Integrated Extended

Functions licenses)

SINAMICS Safety

Integrated Extended

Functions for

SIMOTION D

Per safety axis with

Safety Integrated

Extended

Functions

For integrated

SINAMICS drives

with SIMOTION D

and CX32-2

Controller Extension

SIMOTION Motion Control System

SIMOTION runtime software

Runtime software licensing

Ordering of licenses for runtime software

9/65

Siemens PM 21 · 2013

■

Selection and ordering data (continued)

License type Single-user license

Order No. Order codes for

pre-installed licenses on

SIMOTION memory cards

Licensed

functions License

object Notes

Licenses for SIMOTION IT communication functions

• SIMOTION IT

DIAG 1) 6AU1820-8BA20-0AB0 D00 – IT DIAG license Integrated

web server Per controller On platforms with

Ethernet and/or

PROFINET interface

•SIMOTIONIT

OPC XML-DA 1) 6AU1820-8BB20-0AB0 X00 –

IT OPC XML-DA license Communication via

OPC XML-DA Per controller

•SIMOTIONIT

Virtual Machine 6AU1820-8BD20-0AB0 J00 – SIMOTION IT

Virtual Machine license For SIMOTION Kernel

versions earlier than

V4.2, usable as

combined license for

SIMOTION IT DIAG,

OPC XML-DA and

Virtual Machine.

Per controller

License for SIMATIC NET OPC server on SIMOTION P

• License for

SIMATIC NET

OPC server on

SIMOTION P

6AU1380-0AA20-0YB0 K00 – OPC server license,

on SIMOTION P, XP variant

1) Subject to license for SIMOTION Kernel versions earlier than V4.2

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION Kernel

9/66 Siemens PM 21 · 2013

■

Function

The SIMOTION Motion Control system uses high-performance

CPUs on which a real-time operating system suitable for fast

control processes is implemented.

This real-time operating system organizes an execution system

comprising different execution levels.

Execution system

The SIMOTION execution system makes a distinction between

system execution levels and user execution levels (tasks):

System tasks process operations that are necessary for general

operation of the system. With technology objects, closed loop

position control and characteristic variable calculation is per-

formed in the SERVO, IPO and IPO2 system tasks.

System tasks are regularly executed by the system. The system

cycle clock can be specified.

Execution levels with different execution characteristics are

available for task-related user programming (user program

tasks).

The execution levels define the chronological sequence of pro-

grams in the execution system. Each execution level contains

one or more tasks. The individual user programs are assigned to

these tasks.

All programs – and thus also tasks – can execute PLC,

technology and motion control tasks.

Task types for task-related execution are:

• Synchronous tasks

• Cyclic tasks

• Sequential tasks

• Time-triggered tasks, and

• Interrupt-driven tasks

Synchronous tasks are synchronized with the system tasks and

the control cycle of the drives or the isochronous

PROFIBUS/PROFINET.

With the help of these synchronous tasks, the whole application

is in isochronous mode (Application program ↔ Drives ↔ I/O).

This results in short response times and the application is easily

reproducible.

The following execution levels are available to the application:

StartupTask

The StartupTask is executed once at the operating mode

transition from STOP to RUN; it controls the system start-up.

BackgroundTask

The BackgroundTask is executed cyclically and is used for

general PLC tasks. Cycle time monitoring checks the maximum

processing time of the BackgroundTask. The BackgroundTask

can be compared with the OB1 of a SIMATIC controller.

MotionTasks

MotionTasks are used for motion sequences.

Command sequences in the same Motion Task are usually

executed sequentially, for example, the next motion command is

only started when the previous command has been completed.

The MotionTasks do not require any CPU time during these

waiting times, but respond immediately on receipt of the wait

event.

SynchronousTasks

In servo-synchronous user tasks, time-critical terminal-to-

terminal responses for I/O or fast influencing of setpoints can

be implemented on the servo level (synchronous to the system

cycle SERVO of the technology objects, e.g. position control-

lers).

The IPO synchronous user tasks are started synchronously im-

mediately before the interpolator cycle IPO or the slower IPO2.

Fast Motion Control reactions can be implemented here, as well

as closed-loop control tasks in which the acquisition of actual

values and output of setpoints must be synchronized.

The characteristic variables for the technology objects are

calculated in system cycles IPO and IPO2.

The user program is therefore synchronized with the control

cycle of the drives and with I/O processing. Synchronization

ensures short response times and, above all, deterministic and

reproducible machine behavior.

DCC tasks

Drive Control Chart (option) uses the above-mentioned Synchro-

nousTasks. In addition, further synchronous execution levels

(special tasks for DCC) can be assigned to the blocks.

TimerInterruptTasks

Several time-triggered tasks are available. The call cycles can

be parameterized. Periodically repeated tasks are normally

placed here.

InterruptTasks

InterruptTasks are used for a fast response to internal events that

are signaled using interrupts. InterruptTasks can be activated by

system interrupts, such as alarms and timeouts, or by user inter-

rupts.

ShutdownTask

The ShutdownTask is called when there is a transition to STOP

mode. The specific behavior for the transition into this system

state can be defined here.

The complete instruction set is available for all user tasks. This

allows the current positioning command to be superimposed

with an additional movement from a MotionTask which was

triggered by a UserInterruptTask, for example.

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION Kernel

9/67

Siemens PM 21 · 2013

■

Function (continued)

Task structure of a SIMOTION application

Runtime levels of the technology packages

The execution cycle can be set object-specifically for Motion

Control technology objects.

Technology objects are executed in the execution levels

SERVO cycle and IPO cycle or IPO2 cycle that are synchronized

with the PROFIBUS or PROFINET cycle.

• Command evaluation and motion control in the

IPO/IPO2 cycle

• Position and setpoint control in the SERVO cycle

The SIMOTION D435-2 DP/PN, D445-2 DP/PN and

D455-2 DP/PN Control Units have an additional runtime level

(SERVOFast, IPOFast).

This additional runtime level enables the performance of the

controller to be utilized more efficiently. Electrical and/or hydrau-

lic axes can be distributed over one slow and one fast bus

system, in accordance with the dynamics required.

Electrical positioning drives, for example, can be controlled with

cycle times in the millisecond range requiring fewer resources

and at the same time the pressure-controlled axes of an hydrau-

lic press can be controlled with a high dynamic response and

short cycle times.

The runtime level (SERVOFast, IPOFast) also enables a particu-

larly fast I/O processing in conjunction with, for example,

high-speed PROFINET I/O modules.

Further characteristics of the execution system

• Operating states – Run, Stop, StopU (Stop User Program for

test and commissioning functions)

• Process images for inputs/outputs, is separate for Back-

groundTask, SynchronousTasks and TimerInterruptTasks

• Debug functions such as

- Controlling and monitoring of variables

- Display of the program status

- Breakpoints and single step

- Trace functions

• Kernel updates can be implemented with new SCOUT

versions.

G_PM10_EN_00027a

StartupTask

Stop Run

BackgroundTask

MotionTasks

SynchronousTasks

TimerInterruptTasks

InterruptTasks

Background Task

MotionTask 1

Servo-syncTask

1 ms Task

Int1Task

MotionTask 2

IPO-syncTask

10 ms Task

Int2Task

MotionTask n

IPO2-syncTask

x ms Task

IntnTask

ShutdownTask

Run Stop

Operation

User Program A

User Program C

User Program B

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION technology packages

9/68 Siemens PM 21 · 2013

■

Overview

Scalable functionality through technology packages

The SIMOTION technology packages expand the basic func-

tionality of the SIMOTION devices with additional language com-

mands, which makes adaptation to the respective automation

task easy.

The loadable technology packages support the creation of

technology objects (e.g. positioning and synchronous axis,

cam paths, external encoders, ...) which can be accessed

over system functions and system variables for use in every

SIMOTION programming language.

■

Function

SIMOTION Motion Control technology package

The Motion Control Basic technology functions can be used

without a license. Use of the extended functions of the Motion

Control technology package is subject to a license.

The comprehensive functions of the Motion Control technology

package offer very open and flexible ways of influencing appli-

cation programming and ensure that you can also implement

future motion control applications.

Using the motion control functions in conjunction with the

powerful PLC functionality results in high machine cycles thanks

to short response times as well as high product quality thanks to

reproducible machine behavior.

The "speed-controlled axis" technology object

• Speed setpoints are defined in the program (for servo and

vector drives)

• In addition, additional torque setpoints and torque limits can

be defined, for example, for controlling a winder drive with

tension control

• Access to status and control words of the drive

Release sequence of the PROFIdrive units can be specifically

controlled (e.g. for braking signal)

• Reading and writing of drive parameters

• Support for SINAMICS drives which can perform safety-

related monitoring functions (SOS=Safe Operating Stop,

SLS=Safely Limited Speed, SSM=Safe Speed Monitor,

SDI=Safe Direction) or stop reactions (STO=Safe Torque Off,

SS1=Safe Stop 1, SS2=Safe Stop 2).

The purpose of this support is to prevent stop reactions by the

drive, where SIMOTION uses the application to regulate, e.g.

within permissible velocity limits (with SLS) or stop (with SOS)

the drive.

Activation and deactivation of SINAMICS Safety Integrated

Extended Functions SS1, SS2, SOS, SLS, SSM, SDI as well as

their status are indicated on the axis with specific technology

alarms and system variables.

Further information about SINAMICS Safety Integrated can be

found in chapter Safety Integrated.

"External encoder" technology object

External encoders can be used to detect actual position values

of axes (on PROFIBUS/PROFINET, onboard for C240 and as a

second encoder on the drive).

"Cam and cam track" technology object

• Generates position-dependent switching signals

• Number of cams and cam tracks depend on available system

resources

• Each cam track can have up to 32 cams on one output

The following cam types are available:

•Trip cams

• Position-position cams

• Position-time cams

• Position-time-based cams with maximum ON length

• Counter cams

• Exact time setting of an output, exact time output cams

The cam statuses can be output with:

• Internal variables

• Standard digital outputs

(SIMATIC S7-300, SIMATIC ET 200, ...)

• Onboard outputs of SIMOTION C, D and TM15 /

TM17 High Feature (for high accuracy requirements

in the µs range)

• The output can be inverted

The following can be used as reference points for the switching

edges of the cams:

• Setpoints for real and virtual axes

• Actual values of real axes and external encoders

The following functions are available:

• Parameterizable hysteresis and effective direction

• Activation and deactivation times can be specified separately

(dead time compensation)

• One-time and cyclic output of cam paths

• Parameterizable start/stop mode for cam paths

(immediately, with next path cycle, etc.)

• Edge-triggered enable of cam paths in conjunction with

TM17 High Feature terminal module

• The status of each individual cam (activated/deactivated)

can be read

• Single output cams on a cam track can also be directly

defined as valid/invalid

"Sensor" technology object

Sensors can be assigned to positioning and synchronous axes,

external encoders or virtual axes and supply the axis position at

the time of measuring.

The following functions are available:

• One-time measurement

• Cyclic measurement (2 edges per servo/IPO cycle in conjunc-

tion with TM17 High Feature or SIMOTION C240, D4x5-2)

• Measuring on virtual axes (in conjunction with TM15,

TM17 High Feature, D4xx-2, CX32-2, CUxx or C240)

• Several active measuring inputs on one axis or one measuring

input for several axes (in conjunction with TM15,

TM17 High Feature, D4xx-2, CX32-2, CUxx or C240)

• Parameterizable edge evaluation (rising, falling, both edges)

• Dynamic resolution range

Technology functions for

Motion Control Basic

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION technology packages

9/69

Siemens PM 21 · 2013

■

Function (continued)

The positioning axis technology object

• Contains the functions of the speed-controlled axis

technology object

• Supported axis types:

- Linear axis, rotary axis

- Modulo axis for linear and rotary axes

- Real and virtual axis

- Simulation axis

• Position control for:

- Electrical drives

Position control with digital setpoint output

The following PROFIBUS DP/PROFINET protocol is used for

this purpose: Profile drive technology, PROFIdrive, Version 4

(isochronous mode), use of Dynamic Servo Control (DSC) is

possible with position control in the drive in, for example,

125 µs

Position control with analog setpoint output

(onboard I/Os for C240, ADI 4, IM 174)

- Hydraulic drives

Position control with analog setpoint output (onboard I/Os for

C240, ADI 4, IM 174, analog outputs in the I/O range, e.g. in

combination with ET 200S High Speed I/Os)

The characteristics of the hydraulic valves are specified with

cams

- Stepper motors

Position control with pulse direction output for stepper drives

(onboard I/Os for C240, IM 174)

Alternatively, stepper drives with a PROFIBUS interface can

be connected, provided that they support the PROFIdrive

profile. Stepper drives can be operated without an encoder

or be position-controlled with an encoder.

• Position-controlled positioning:

Axes can be manipulated individually without interpolation

context by specifying, for example:

-Axis name

- Position

-Velocity

- Acceleration/delay, jerk

- Transition behavior to next motion

• Speed-controlled operation of positioning axes

• Monitoring and limiting (standstill, positioning, dynamic follow-

ing error, standstill signal, controlled variables, hardware/soft-

ware end positions, encoder limit frequency, velocity error,

measuring system difference/slip, limits for the dynamic

response)

• Reversing block (prevents the output of setpoints which would

cause a reversing motion)

• Movement profiles on axis defined over cams:

- Path over time

- Velocity over time

- Velocity over path

• Force and pressure control of an axis:

- Direct switchover from position to pressure-controlled

operation and vice versa

- Several pressure sensors possible

- Pressure difference measurement

• Force and pressure limitation of an axis

• Force and pressure profiles specifiable over cams:

- For closed-loop control and limitation

- Force/pressure over time

- Force/pressure over path

• Traveling to a fixed stop point

- Stop on reaching a following error limit

- Stop on reaching a torque limit

- Stop with defined torque

• Traversing with additive torque, adjustable torque limiting and

flexible torque limits B+/B-

• Transition behavior of successive motions:

- attach, i.e. each motion is completed and the axis stops

between motions (exact stop)

- continuous move, i.e. the transition to the next motion begins

when braking starts.

- replace, i.e. the programmed motion is performed

immediately. The active command is aborted.

• An additional motion can be performed during an active

motion, for example, an active positioning motion can be

performed simultaneously to a compensation motion.

• Concurrent start of positioning axes

•Homing:

The following homing types are currently supported:

- Active homing (reference point approach)/passive homing

(homing on-the-fly)

o With reference cam and encoder zero mark

o With external zero mark only

o With encoder zero mark only

o BERO proximity switch and hardware limit switch as

reversing cam

o Hardware limit switch as reference cam

- Direct homing / setting the home position

- Relative direct homing (shift by specified offset)

- Absolute encoder homing / absolute encoder calibration

• Compensations and reference points:

- Reference point offset

- Backlash on reversal compensation

- Static friction compensation

- Sliding friction compensation for hydraulics

- Drift compensation for analog drives

• Pressure mark correction

• Encoder switchover:

Up to 8 encoders can be specified for an axis:

- For the position control, only one encoder is active at any

one time:

- The switchover between encoders can be performed

on-the-fly (with a change-over smoothing filter).

- The actual value for the non-active encoder can be read with

the application program and used for specific monitoring, for

example.

•Override:

- Factors can be superimposed online on the current traverse

velocity and acceleration/deceleration.

POS –

Positioning technology functions

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION technology packages

9/70 Siemens PM 21 · 2013

■

Function (continued)

Synchronized axis technology object

• Contains the functions of the positioning axis technology

object

• Synchronized speed for position-controlled axes

• Angular synchronization, electronic gear:

Stable, long-time angular synchronization over several axes is

ensured. The gear ratio can be adjusted in small steps.

• Absolute and relative gearbox synchronism

• Offset of the following axis

• Leading axis:

The master value can be changed immediately between

master value sources (transition dynamics must be specified).

The following can be used as a leading axis or master value

sources for the following axes:

- Virtual axis:

The virtual axis only exists in the control and therefore does

not have a real drive, motor or encoder. A virtual axis can be

controlled with commands in the same way as a real axis.

The motion control calculates the setpoints with the interpo-

lator which can be used as a master value for synchronous

operation, for example.

- Real axis:

The real axis is a leading axis which is part of the SIMOTION

system and can be coupled over a setpoint and actual value.

- External encoder:

The actual value is detected with an external encoder and

supplied as a master value after conditioning.

• Setpoint value linkage as well as actual-value linkage with

compensation of dead times.

• Angular position and electronic gear ratio for axes can also be

changed during operation.

• Engaging/disengaging:

Following axes can be stopped for one cycle or moved for

only one cycle to remove a faulty component, for example.

This can be flexibly implemented with the programmable

synchronism functionality.

• Synchronization and desynchronization:

- Following axes can be synchronized and desynchronized

while the leading axis is in motion or standing still.

- The angular position to the leading position can be

specified.

• Different synchronization modes are available:

- Synchronization via a specifiable master value distance

- Synchronization based on specifiable dynamic response

parameters (jerk-limited)

- Synchronizing position for synchronization and desynchroni-

zation at a precision position

- Position of synchronizing range (before, after and symmetri-

cally with synchronizing position)

• Terminating synchronized operation of/to positioning

• Comprehensive synchronized operation monitoring functions

• External synchronization:

By flying measurement of, for example, a print-mark and a

superimposed positioning function, a material slip can be

corrected.

• Simultaneous motion during synchronized operation:

A positioning motion or other synchronized operation can be

performed during synchronized operation.

• Distributed synchronous operation and the option to

implement synchronous operation beyond device limits.

- PROFIBUS: Leading axis to PROFIBUS master, following

axes to PROFIBUS slaves.

- PROFINET: Changeover between leading axes to different

SIMOTION controllers possible. Cascading of the synchro-

nous operation over several SIMOTION controllers.

- Dead times are compensated automatically.

- Also possible across different projects (independent

projects)

Cam technology object

• Contains the functions of the synchronous axis technology

object

• The number of cams depends on the available system

resources

• The number of support points or segments per cam depends

on the available system resources

• Cam functions:

- Definition over table support point or polynomials up to 6th

degree with trigonometrical functions

- Motion rules implementable to VDI 2143

- Transition between support points/polynomials:

Linear, continuous, spline

• Scalability, cam functions can be offset and switched even

during operation:

- The leading and following axis positions of the cam functions

can be scaled and offset during operation.

- The active cam function can be defined and switched during

operation.

• Non-cyclic and cyclic editing of cams

• Absolute and relative curve synchronization

• Absolute and relative master value referencing

• Synchronization and desynchronization (see synchronous

operation technology object)

• Overriding of 2 synchronized cams

• Cams can be defined and modified with the SCOUT engineer-

ing system or with an application program during runtime.

GEAR –

Synchronous operation/electronic gear

technological functions

CAM –

Cam technology functions

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION technology packages

9/71

Siemens PM 21 · 2013

■

Function (continued)

Path interpolation technology object

The path interpolation technology object is primarily intended for

the automation of handling robots. Interpolation in machines for

material machining is covered by the SINUMERIK machine tool

controllers. (Further information about SINUMERIK control

systems can be found in Catalogs NC 60 and NC 61.)

• The number of path objects is dependent on the performance

of the hardware platform used.

• Interpolation types:

- Linear interpolation in 2D and 3D

- Circle interpolation in 2D and 3D

- Polynomial interpolation in 2D and 3D

• Interconnection of a path object is possible with:

- Up to 3 interpolating path axes

- One positioning axis for path-synchronized motion (axis

moves in synchronism with motion)

- One cam for specifying velocity profiles along the path

• Connection of path-based cams, cam tracks and measuring

inputs over the positioning axis for path-synchronized motion

• Interconnection of the Cartesian path coordinates with

positioning axes is possible. Cams, cam tracks and

measuring inputs can also be implemented on the path

• The path dynamics (acceleration, jerk) are specified on the

path, axis limits are generally applicable regardless of the

limits along the path

• Dynamic planning via 3 traversing blocks

• Continuous geometric movement between 2 traversing blocks

• Kinematic transformations for:

- Cartesian gantry

-SCARA

- Robotic arm (toploader)

- Roller picker

- Delta 2D and Delta 3D picker

-Swivel arm

• Synchronization with conveyor belts (conveyor tracking). This

facilitates the handling of products which are continuously fed

or continuously removed.

• Programming in ST and MCC

A pre-configured sample application can be used for easy

implementation of handling robots, which allows both jog mode

and the creation of motion programs (see SIMOTION Utilities &

Applications which is supplied with SIMOTION SCOUT).

More information about handling applications can be found in

chapter Sector-specific solutions.

Kinematics in the Motion Control technology package

PATH –

Path interpolation technology functions

G_PM10_EN_00190b

Delta 3D pickerDelta 2D picker

Roller pickerSCARACartesian 3DCartesian 2D

Swivel arm Robotic arm

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION technology packages

9/72 Siemens PM 21 · 2013

■

Function (continued)

Supplementary technology functions

"Fixed gear" technology object

You can use the "Fixed gear" technology object to implement a

fixed synchronous operation (without synchronization/desyn-

chronization) using a specified gear ratio. Fixed gearing con-

verts an input variable to an output variable with a configured

transmission ratio (gear ratio).

A Fixed Gear technology object can be used as follows, for

example:

• To make allowance for diameters in a master variable

• To implement a fixed gear ratio without coupling

• For speed synchronization on speed-controlled axes

• As a motion-coupled gear on master value, following axes are

engaged or disengaged. In this way, the gear is always syn-

chronized with the master value. Example: A paper web runs

synchronously with the master.

"Summator" technology object

The summator object can be used to add up to four input vectors

(motion vectors) with one output vector. An addition object can

be used as follows, for example:

• To add up superimpositions/offsets in the main signal path,

e.g. color register, cut-off register on the paper web

"Formula" technology object

Formula object for scalable variables and motion vectors.

A formula object can be used between interconnected objects

to modify scalar variables in the main signal path, e.g.:

• Superimposition of torque

• Superimposition of master velocity

• Modification of torque variables B+, B-

• Enabling of torque limitations

• Enabling of torque

"Sensor" technology object

The sensor object can be used to acquire scalar measuring

values. A sensor object reads out a value from the I/O and

supplies an actual value as an output signal in standardized

formats.

"Controller" technology object

The controller object can be used to prepare and control scalar

variables.

A controller object can be used as a universal PIDT1 controller

for scalar control variables as well as a PI and P controller.

Interconnection of technology objects

The individual technology objects can be interconnected. The

supplementary technology functions, for example, can be used

to implement additional winder applications directly on the

system level.

Note:

No license is necessary for using the supplementary technology

functions.

SIMOTION TControl technology package

Temperature Channel technology object

The controller core of the temperature technology package

has a DPID structure. Pure heating controllers and cooling

controllers as well as combined heating/cooling controllers can

be configured and parameterized.

User-assignable functions are available for each temperature

channel:

• Each temperature channel can either be configured as a

heating or cooling section or as a combined heating/cooling

section.

• The controllers either use a PID or DPID control algorithm or

use the optional control zone functionality.

• In manual output mode, a replacement value can be output.

• You can select the operating mode for each controller channel

separately. In this way, you can switch the output to a fixed

value.

The following operating modes are available:

- Closed-loop control for operating setpoint

- Actual value acquisition and output of the manual

manipulated variable value

- Actual value acquisition and output of 0

- Self tuning

• Actual value acquisition and processing

- Plausibility check for each new actual value and correction

before corresponding filter measures

- Filtering (by PT1 element)

• Actuating signal preparation and output

- Digital, pulse-length modulated actuating signal

- Prevention of minimal pulse durations for I/O cycles by

integration of lost pulses

- Manual actuating value (for manual output mode)

- Output value limitation

- Replacement value (calculated dynamically)

• Self-tuning for heating controllers

- This ensures fast startup without overshooting and maintains

the setpoint value without lasting system deviations.

- Self-tuning can be used in parallel for all desired channels to

ensure optimal parameter acquisition even for strongly

coupled temperature sections.

• Monitoring and alarm functions

- Actual value monitoring by definition of tolerance bands.

The inner and outer tolerance bands can be defined inde-

pendently as absolute or relative tolerance bands.

- Measuring circuit monitoring for increased operational safety

of a plant

- Plausibility check

- Alarm functions

The use of the TControl technology package is clarified by

an application example. The application example provides

functional expansions, function interfaces to the application and

data interfaces to the HMI. It is contained in the Utilities &

Applications which are supplied with SIMOTION SCOUT.

TControl –

Temperature controller technology

functions

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION technology packages

9/73

Siemens PM 21 · 2013

■

Function (continued)

SIMOTION technology package for Drive Control Chart (DCC)

Technology functions for Drive Control Chart

With Drive Control Chart (DCC), open-loop and closed-loop

control functions can be easily configured graphically. Multi-

instance function blocks are selected from a block library using

drag & drop, graphically interconnected and parameterized.

The control structures are presented clearly.

The block library comprises a large selection of

• control,

• arithmetic and

• logic blocks as well as

• comprehensive open-loop and closed-loop control functions.

Further functions:

• For linking, evaluating and acquiring binary signals, all the

commonly available logic functions are available, for example,

AND, XOR, On/Off delays, RS flip-flops or counters.

• For monitoring and evaluating numerical values, numerous

arithmetic functions are available, such as:

- Summation

-Divider

- Minimum/maximum evaluation

• Apart from the automatic speed control, winders, PI controls,

ramp-function generators and wobble generators can easily

be configured.

More information about Drive Control Chart (DCC) can be found

in section Optional packages for SIMOTION SCOUT.

SIMOTION technology package Multipurpose Information

Interface (MIIF)

The SIMOTION technology package MIIF (Multipurpose Infor-

mation Interface) functions as a server to permit symbolic

access to SIMOTION data and makes them available to clients

(e.g. operator panel) via Ethernet.

Access to SIMOTION variables is purely symbolic. The client

application is not in any way dependent on the SIMOTION appli-

cation. The communication is TCP/IP-based. Several controllers

and HMI stations can be operated on an Ethernet line.

The server is active after being loaded to the controller. The

server does not need to be configured in the application.

Symbolic access to SIMOTION data with MIIF

The server allows variables to be read and written within

SIMOTION RT. System variables of the device, system variables

of technology objects and UNIT global variables are supported

here. Global device variables and I/O variables are not supported

in the OAMIIF V1.0. If these are displayed/changed, they need to

be copied by the application.

The server works at round robin level. This means that response

times are longer on a system working at full capacity. Determin-

istic behavior is not guaranteed.

The technology package MIIF (Multipurpose Information Inter-

face) is compatible with the following SIMOTION controllers:

• SIMOTION C240/C240 PN

• SIMOTION P320-3/P350-3

• SIMOTION D410-2/D4x5-2

Runtime software V4.1 SP4 or higher must be installed on the

SIMOTION controller.

lP addresses

1, 2

lP address

HMI station

(client)

HMI station

(client)

SIMOTION

controller with

MllF (server)

SIMOTION

controller with

MllF (server)

G_PM10_EN_00199c

PROFINET/Ethernet

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION PLCopen blocks

9/74 Siemens PM 21 · 2013

■

Overview

Block library containing certified function blocks

in accordance with PLCopen

PLCopen is an association of leading PLC manufacturers that

was formed for the purpose of defining international standards

in the field of PLC programming and promoting their use.

The PLCopen function blocks integrated into the Motion Control

technology package are designed for use in cyclic programs/

tasks; they enable motion control programming in a PLC environ-

ment. The function blocks can be selected from the SCOUT

command library and can therefore be easily used in all

SIMOTION programming languages. They should preferably be

used in LAD/FBD.

The following certified single-axis and multi-axis PLCopen

blocks as well as extended functions are available:

Single-axis function blocks

• _MC_Power (axis enable)

• _MC_Stop (stop axis)

• _MC_Reset (reset axis)

• _MC_Home (reference point approach for axes)

• _MC_MoveAbsolute (absolute positioning of axes)

• _MC_MoveRelative (relative positioning of axes)

• _MC_MoveVelocity (traversing axes at a specified velocity)

• _MC_MoveAdditive (relative traversing of axes by a defined

path additively to the remaining path)

• _MC_MoveSuperimposed (relative superimposition of a new

motion in addition to existing motion)

• _MC_PositionProfile (traversing axis by a predefined and

specified position/time profile)

• _MC_VelocityProfile (traversing axis by a predefined and

specified velocity/time profile)

• _MC_ReadActualPosition (read actual position of axis)

• _MC_ReadStatus (read status of an axis)

• _MC_ReadAxisError (read error of an axis)

• _MC_ReadParameter (read axis parameter, LREAL data type)

• _MC_ReadBoolParameter (read axis parameter, BOOL

data type)

• _MC_WriteParameter (write axis parameter, LREAL data type)

• _MC_WriteBoolParameter (write axis parameter, BOOL

data type)

Multi-axis function blocks

• _MC_CamIn (enable cam with synchronization)

contains implicit _MC_CamTableSelect (selection of cam)

• _MC_CamOut (disengage cam with desynchronization

length)

• _MC_GearIn (synchronize)

• _MC_GearOut (desynchronize)

• _MC_Phasing (apply phase shift)

Apart from the standard PLCopen functions, the following

additional standard axis function is included:

• _MC_Jog (continuous or incremental jogging)

SIMOTION Motion Control System

SIMOTION runtime software

OPC server

9/75

Siemens PM 21 · 2013

■

Overview

OPC (Open Process Communication) is used by the Windows 7

and Windows XP operating systems as a communications

interface.

The basic principle of OPC is that OPC client applications can

communicate with the OPC server over a standardized, open

and multi-vendor interface. COM (Component Object Model)

and DCOM (Distributed COM) are applied as basic procedures.

Pre-existing COM-capable Windows applications (MS Office or

HMI systems) can be linked.

As a basic rule, however, software for communication via OPC

must be installed on all systems.

The OPC servers fulfill the following specifications of the OPC

Foundation:

• Data Access Automation Interface

• Data Access Custom Interface

• Alarm and Events Custom Interface

OPC on PC and PG

The SIMATIC SOFTNET S7 communication software for PC/PG is

available for PROFIBUS DP and PROFINET/Industrial Ethernet

and includes software for S7 communication, S5-compatible

communication and communication with SIMOTION.

OPC on SIMOTION

The SIMATIC NET OPC server is pre-installed on

SIMOTION P350-3, but its use is subject to to a license.

See selection and ordering data.

Communication can thus take place internally on

SIMOTION P350-3 from Windows level to SIMOTION runtime

level by means of OPC mechanisms and functions.

■

Benefits

7Standardized access to SIMATIC S7 and SIMOTION for

OPC-capable applications under Windows XP and

Windows 7

7Integration of automation products of different manufacturers

7The same, easy-to-use user interface for different components

7Can be accessed from every computer in the LAN

7High-performance data access over the "Custom Interface"

(C++)

7Easy to use with the "Automation Interface" (VB) or the

supplied OCX data control

■

Function

Programming

• Synchronous and asynchronous reading and writing of

variables

• Monitoring of variables using the OPC server with a signal to

the client when a change occurs

• Transmission of alarms and events to client

• Use of batch operations, so a large volume of data can be

processed in a short time

Interfaces

• Custom Interface (C++) for high OPC performance

• Automation Interface (VB, Excel, Access, Delphi, etc.)

for ease-of-use

• Graphics with OCX for configuring instead of programming

Bus systems

• Communication over OPC for PROFIBUS and Industrial

Ethernet is supported.

Operating systems

• Windows XP Professional

• For 32 bit: Windows 7 Professional/Ultimate

• For 64 bit: Windows 7 Professional/Ultimate

SIMOTION Motion Control System

SIMOTION runtime software

OPC server

9/76 Siemens PM 21 · 2013

■

Integration

A variety of different requirements must be fulfilled in order to set

up a communication link from a PC/PG to SIMOTION via OPC:

Requirements for communication via PROFIBUS

• PC/PG with CP 5621 PCI card and SOFTNET S7

communication software for PROFIBUS DP, or

• PG/Notebook with CP 5512 PCMCIA card and SOFTNET S7

communication software for PROFIBUS DP

Requirements for communication via Industrial Ethernet

• PC/PG with standard Ethernet interface and SOFTNET S7

communication software for Industrial Ethernet or

SOFTNET S7/LEAN for Industrial Ethernet (only

8 connections)

■

Selection and ordering data

■

More information

More information about the SIMATIC NET software package with

OPC server can be found in Catalog IK PI and the Industry Mall

under Automation Technology/Industrial Communication.

Description Order No.

SOFTNET S7

communication software for

PROFIBUS DP

Software for S7 communication incl.

FDL and S7 OPC server, with electronic

manual on CD-ROM, for use with

CP 5512 and CP 5621 modules

6GK1704-5CW80-3AA0

CP 5512

communications processor

PCMCIA card for connecting a PG or

notebook computer to PROFIBUS DP

and MPI

6GK1551-2AA00

CP 5621

communications processor

PCI card for connecting a PG or

AT-PC to PROFIBUS DP or MPI

6GK1562-1AA00

SOFTNET S7

communication software for

Industrial Ethernet

Software for S7 communication,

S5-compatible communication

(SEND/RECEIVE), incl. OPC,

PG/PC communication,

incl. S7 OPC server,

with electronic manual

6GK1704-1PW08-1AA0

SOFTNET S7 LEAN

communication software for

Industrial Ethernet

Software for S7/S5-compatible

communication, incl. OPC,

PG/OP communication and

NCM PC, up to 8 connections

6GK1704-1LW08-1AA0

SIMATIC NET OPC server on

SIMOTION P

License for pre-installed communication

software on the SIMOTION P

Motion Controller

6AU1380-0AA20-0YB0

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION IT

9/77

Siemens PM 21 · 2013

■

Overview

SIMOTION IT: Three different technologies for easy access to control and machine data

SIMOTION IT: Service and diagnostics via the Internet

The SIMOTION controllers support communication with the

outside world through the integrated Ethernet or PROFINET in-

terface using standard IT protocols such as HTTP. Using the web

functions integrated in SIMOTION IT, machine manufacturers

and users can perform commissioning, diagnostic and service

procedures on production machines easily and without

additional engineering tools.

The web pages provided by SIMOTION IT supply comprehen-

sive information about the current condition of a SIMOTION

controller. This information can be accessed with a standard PC

and commercially available Internet browser. Extensive protec-

tion has been provided to ensure security against unauthorized

access by third parties. The integrated web pages provide users

with commissioning and service support, e.g. helping them to

detect the causes of faults, and with upgrading the software on

the SIMOTION controller.

SIMOTION IT offers three varying technologies

SIMOTION IT DIAG and SIMOTION IT OPC XML-DA each

provide a communications server on the SIMOTION controller.

Via Industrial Ethernet/PROFINET, a client PC can then access

data in the SIMOTION controller for diagnostic or service

purposes or for visualization.

SIMOTION IT Virtual Machine provides a Java runtime environ-

ment on the SIMOTION controller. This means that Java applica-

tions can be executed on the SIMOTION controller. This allows

you to create your own programs for commissioning, service and

preventive maintenance.

Licensing of SIMOTION IT

With SIMOTION Kernel version V4.2 and higher, only a license

for SIMOTION IT Virtual Machine is required. Here, the

SIMOTION IT functions IT DIAG and OPC XML-DA are part of the

standard firmware of the SIMOTION controller and do not require

a license.

Note:

A license with SIMOTION Kernel < V4.2 is still required for using

the functions SIMOTION IT DIAG and OPC XML-DA. These must

be licensed using the respective software options. The

SIMOTION IT Virtual Machine license can still be used for

SIMOTION Kernel < V4.2 as a combined license for

SIMOTION IT DIAG, OPC XML-DA and Virtual Machine.

G_PM10_EN_00201

Special application

[OPC XML-DA

client]

Standard

application

[web browser]

Java VM WEB server

API

Controller data and machine dataSystem functions

XML format

HTTP protocol

HTML format

HTTP protocol

OPC-XML server

API API

Operator level

Communication level

Controller level

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION IT

9/78 Siemens PM 21 · 2013

■

Function

SIMOTION IT DIAG

SIMOTION controllers have a web server integrated into their

runtime systems. For implementing applications with SIMOTION

IT DIAG, a series of predefined web pages are stored in the

SIMOTION controller that offer the following information and

functions:

• Device information

Detailed information about the firmware versions, hardware

components and technology objects of the device

• Diagnostics

Information about device resources such as: CPU load, mem-

ory usage, task duration times and operating state, diagnostic

buffer, extended diagnostic buffer and technology object

alarms, axis overview, watch tables and runtime trace

The diagnostic pages for SIMOTION D also display drive

alarms, drive diagnostic buffer and parameters of the

integrated SINAMICS drive.

• Runtime trace

Recorded data are loaded to the PC with a mouse click.

The Web Trace Viewer for Windows XP offers a wide scope of

options for evaluating recorded data: Graphical, with zoom

and dual measuring cursor.

SIMOTION D offers the Web Trace Viewer as a direct

download.

• System trace

As with SCOUT, a trace can be initiated over different

controllers.

• Access to the device file system

An Internet browser can be used to store and access any

number of files in the file system of the SIMOTION controller.

In this way, documentation and service instructions can be

stored directly in the controller, for example.

• Project update and firmware update

A special web page can be used to update the SIMOTION

project and also the firmware of the SIMOTION controller.

• Access protection

The web pages are protected with a user name and pass-

word. Different user groups can be defined for different pages.

• User-specific web pages

The user can create web pages and save them on the

SIMOTION controller. "Server side includes" are used to

access SIMOTION variables in these web pages. This is a

special HTML syntax extension which allows the values of the

selected variable to be inserted on a web page.

Read and write access to the SIMOTION variables is possible.

Java scripts or applets can be used to implement active

operation and display functions in the web pages that can be

executed on a client PC with an Internet browser.

The standard pages of SIMOTION IT DIAG have the same

design as the pages on a SIMATIC controller. The service over-

view and watch table can also be opened in parallel in separate

windows.

A horizontal navigation can be created very easily for user-

defined pages. No additional software is required.

SIMOTION IT OPC XML-DA

SIMOTION controllers have an OPC XML-DA server integrated

in their runtime system. OPC XML-DA is an interface specified

by the OPC Foundation and is based on the standard IT protocol

HTTP. The data requests of a client are coded in XML symboli-

cally and transmitted to SIMOTION using the HTTP protocol.

These are evaluated by the integrated OPC XML DA server and

the response is then sent back to the client over the same path.

It is therefore possible, for example, to create HMI applications

in different programming languages (C#, Visual Basic, Java) on

any client systems independently of the operating system.

The application works with the symbolic names of the SIMOTION

variables and has thus only a loose, symbolic dependence on

the SIMOTION SCOUT database. A symbol export, similar to the

Windows-based process on the SIMATIC NET OPC DA server, is

not required. This ensures that consistency problems between

the version of the client application and the project version in

SIMOTION are avoided.

The OPC XML-DA server offers the following functions for

access to the data of the SIMOTION controller:

• Read and write access to the SIMOTION variables

• Access to diagnostic buffer, extended diagnostic buffer and

technology alarm objects

• Symbolic browsing function via the SIMOTION variables

• Cyclical reading of variables using "subscriptions"

• Access protection (password-based) can be configured, if

required.

SIMOTION IT OPC XML DA is integrated directly in the

SIMOTION Kernel. The functionality responds in accordance

with the specification of the OPC Foundation "OPC XML-DA

Specification Version 1.01".

Note:

SIMOTION offers two different access possibilities over OPC.

The method already described over OPC XML-DA and the

method over OPC DA. OPC DA requires that the SIMATIC NET

package is installed on the client PC and it is described in the

"OPC server" section.

More information about OPC can be found on the Internet at

www.opcfoundation.org

SIMOTION Motion Control System

SIMOTION runtime software

SIMOTION IT

9/79

Siemens PM 21 · 2013

■

Function (continued)

SIMOTION IT Virtual Machine

SIMOTION controllers have an integrated Java runtime environ-

ment (Virtual Machine) in their runtime system. Use of this func-

tion is licensed by the "SIMOTION IT Virtual Machine" license.

Java applications can be executed on a SIMOTION controller

with SIMOTION IT Virtual Machine. This allows you to develop

your own programs and concepts for commissioning, service

and preventive maintenance.

The programs can be created with standard development tools

that are available on the market, such as Eclipse or Borland

JBuilder. When they have been created, the programs can be

downloaded into the SIMOTION controller online. There is no

dependency on SIMOTION SCOUT.

All Java applications on the SIMOTION controller are executed

in asynchronous tasks in the SIMOTION task system, not in

real-time tasks.

The Java environment provides an interface (API) to the

SIMOTION runtime system over special system functions.

The following functions are available:

• Read and write access to the SIMOTION variables

• Read and write access to the non-volatile memory (NVRAM)

• Use of system functions (functions of the technology objects)

• Use of standard Java classes in the device (file access,

network functions, string functions, ...)

• Creation of servlets, for the purpose of enhancing menu

interfaces in web pages, in particular.

■

Selection and ordering data

Note

SIMOTION IT is available only on SIMOTION controllers with

Ethernet or PROFINET interface.

Description Order No.

As of SIMOTION Kernel V4.2, the SIMOTION IT functions IT DIAG and

OPC XML-DA are included in the standard firmware of the SIMOTION

controllers and do not require a license. Use of the function

SIMOTION IT Virtual Machine must be licensed through the following

software option:

SIMOTION IT Virtual Machine

License for SIMOTION IT

Virtual Machine on one controller

Note

It can be used as a combined license for

SIMOTION Kernel < V4.2 for

SIMOTION IT DIAG, OPC XML-DA and

Virtual Machine.

6AU1820-8BD20-0AB0

The functions SIMOTION IT DIAG and OPC XML-DA remain subject to

licensing with SIMOTION Kernel < V4.2. They must be licensed using

the following software options:

SIMOTION IT DIAG

License for SIMOTION IT DIAG

on SIMOTION Kernel < V4.2

6AU1820-8BA20-0AB0

SIMOTION IT OPC XML-DA

License for SIMOTION IT OPC XML-DA

on SIMOTION Kernel < V4.2

6AU1820-8BB20-0AB0

SIMOTION Motion Control System

SIMOTION engineering software

Overview of engineering software

9/80 Siemens PM 21 · 2013

■

Overview

SIMOTION SCOUT: a uniform view of your automation task

SIMOTION SCOUT – The holistic engineering system for

your motion control applications

The SIMOTION Motion Control system provides a wide variety of

preprogrammed functions and you can assign parameters and

program it for customized use.

For practical implementation of your automation tasks, you

therefore require a tool that will support all the necessary

engineering steps in a user-friendly manner: SIMOTION SCOUT

SCOUT is the environment for uniform automation in mechanical

engineering. It supports simple engineering of complex

production machines with demanding PLC and Motion Control

functions.

SCOUT is integrated in STEP 7 and is therefore also integrated

into the SIMATIC landscape to ensure Totally Integrated

Automation (TIA).

SCOUT provides

• an integrated, function-oriented view of your automation task,

combined with

• a high level of user friendliness.

The possible SIMOTION applications range from a simple,

parameterizable, speed-controlled single axis through to

complex, mechatronically-coupled and programmable multi-

axis machines.

Therefore, SCOUT provides views adapted to the task and can

be expanded with additional tools (e.g. tool for the graphic

creation of cams).

SIMOTION SCOUT – A tool for engineering, testing and

diagnostics

SCOUT supports all the steps required for creating a Motion

Control application: configuration, parameterization, program-

ming, testing and diagnostics.

The integrated test and diagnostics functions are useful when

commissioning and servicing.

The graphical menu system of SCOUT supports the user with

important tasks, such as:

• Creation of the hardware and network configuration

• Creation, configuration and parameterization of technology

objects such as axes, measuring inputs, output cams, cam

tracks and cams.

SIMOTION SCOUT – Support for text-based and graphical

programming

With SCOUT the following programming languages are available

for programming a SIMOTION application:

• Structured Text in accordance with IEC 61131

• LAD (Ladder Diagram) and FBD (Function Block Diagram)

• MCC (Motion Control Chart): the graphical "flow diagram

language" for easily describing and programming motion

sequences for production machines

• DCC (Drive Control Chart): graphical configuration of open

and closed-loop control functions

Optional CamTool package (cam editor)

The optional CamTool package expands SCOUT with a powerful

graphical tool for creation and optimization of cams. Simple

editors for creating cams are already integrated in SCOUT as

standard.

Optional Drive Control Chart (DCC) package

With Drive Control Chart (DCC), drive-based open and closed-

loop control functions can be easily configured graphically.

Multi-instance function blocks are selected from a standard

function block library, and then graphically linked by means of

drag & drop and parameterized. The control structures are

presented clearly in SCOUT.

The optional CamTool and Drive Control Chart packages are

completely integrated in the SCOUT environment.

Diagnostics for Testing

and Commissioning (Trace)

Axis control panel

Ladder logic (LAD) /function

block diagramm (FBD)

Structured

Text (ST)

Hardware and Network

Configuration

Creation of Technology

Objects

Configuration / Parameterization

Programming

Testing and Commissioning

Creation of Cams

(Basic)

Motion Control

Chart (MCC)

STARTER Drives and

Commissioning Tool

G_PM10_EN_00034c

SIMOTION SCOUT

Project Management

Workbench

Optional SCOUT packages

Graphics-based configuration

with Drive Control Chart (DCC)

DCC-Editor

Graphics-Based Cam

Editor (CamTool)

Graphics-based creation and

optimization of cams

SIMOTION Motion Control System

SIMOTION engineering software

SIMOTION SCOUT software package

9/81

Siemens PM 21 · 2013

■

Overview

The SIMOTION SCOUT software package is the basis for

implementation of the SIMOTION Motion Control System.

It essentially contains the SIMOTION SCOUT engineering

system including the integrated STARTER commissioning tool

and the runtime software for all SIMOTION platforms.

SIMOTION SCOUT is available as an optional STEP 7 package

or as SIMOTION SCOUT stand-alone.

SCOUT also supports the engineering of SIMOTION platforms

with older runtime versions.

SIMOTION SCOUT

The SIMOTION SCOUT engineering system provides important

new features in version V4.2 and higher. The focus is on an

improved connection of the SINAMICS S120 drive system, the

completion of the comparison functionality and many usability

improvements.

Improved connection to SINAMICS S120

The most important innovation in the SIMOTION SCOUT engi-

neering system is the significantly simplified connection to the

SINAMICS S120 drive system. Drives and their components are

integrated automatically to the greatest possible extent. The

connections to the drive objects are simply interconnected,

whereby the required message frame generation is performed

automatically by the engineering system.

Project comparison now also in LAD/FBD and MCC

The detail comparison option available when using Structured

Text (ST) is now also available in the graphical programming

languages LAD/FBD and MCC (Motion Control Chart). This

enables the graphical comparison of programs, where the

different structures and commands can be recognized through

colored highlighting. The comparison function is available for

offline-offline and also for offline-online comparison.

Uniform display of lists

The display of all lists in the system has now been simplified and

adapted to the well-known look and feel of Office applications.

The highest possible data security was observed during the

implementation. If there are any operation faults (e.g. faulty copy

and paste), the system restores the data. In this way, even be-

ginners can become familiar with the engineering software,

intuitively, quickly and safely.

System trace across several motion controllers

The so-called system trace feature is available for analysis or

system optimization. This enables up to 128 signals from

SIMOTION controllers networked via PROFINET to be recorded

synchronously.

Trace for technology objects

With the new TO trace, all events affecting a technology object

can be recorded in real-time and displayed in detail in a

chronological sequence in the engineering system.

New watch tables

The new watch tables provide extended functions and diagnos-

tic options. They allow different variables of the project (also dif-

ferent devices) to be collected. The watch tables can be clearly

displayed and controlled with current values. Stored control

value tables can also be used to perform comprehensive test

sequences quickly and easily.

Improved diagnostics and troubleshooting

New features such as the "Trace" in the MCC editor, which make

the program sequence visible and understandable even with

rapid command transitions, provide greater clarity in diagnostics

and troubleshooting. Or "talking" icons in the tabs of the opened

programs that refer to active status or debug functions.

Easier to use during programming

Greater clarity is provided in the general programming through

small additions such as the display of the variable type, display

of the current value when there is an online connection and

language-dependent comments which appear when the cursor

is moved over the code ("tooltips").

Rollout tips provide the user with information on input errors or

system information that is still missing when working in tables or

entry fields.

The system-wide effective automatic completion of user entries

("Auto-Complete") with automatic correction of upper/lower case

makes the editing process more efficient and provides an easily

readable program code.

Simple interconnection of the drive I/Os

Detail comparison with ladder logic (LAD)

SIMOTION Motion Control System

SIMOTION engineering software

SIMOTION SCOUT software package

9/82 Siemens PM 21 · 2013

■

Overview (continued)

Scope of supply

SIMOTION SCOUT engineering software

• SCOUT with corresponding license

• License key for SCOUT

• Integrated STARTER commissioning tool

Optional packages for SIMOTION SCOUT

• Optional CamTool package without license

The license must be ordered separately.

• Optional Drive Control Chart (DCC) package without license

The license must be ordered separately.

Documentation

• Complete SIMOTION documentation on DVD

Other software

• SIMOTION – Utilities & Applications

Free utilities (e.g. calculation tools, optimization tools, etc.)

and application examples (ready-to-apply solutions such as

winders, cross cutters or handling) as well as the project

generator SIMOTION easyProject

• SIMATIC NET without license

• SIMATIC software:

With SCOUT stand-alone, the necessary components of

STEP 7.

System requirements for V4.3

Software

• Windows XP SP3 or Windows 7 Professional or Ultimate

(32/64-bit)

• SIMATIC STEP 7 V5.5 SP2 (not required for SCOUT

stand-alone)

Hardware

Minimum system requirements PG/PC for SCOUT:

• As of Pentium IV 2.5 GHz, 1 GB RAM (2 GB recommended)

• At least 1024 MB main memory for PG/PC and SIMOTION P;

2 GB main memory is recommended

• Screen resolution: 1024 x 768 pixels, 16-bit color depth

• Free hard disk memory: 3 GB

With additional installation of WinCC flexible ES in Scout:

• Pentium IV 2.5 GHz, 4 GB RAM

Integrated STARTER commissioning tool

The STARTER commissioning tool is directly integrated in

SCOUT. It supports the simple and rapid commissioning, optimi-

zation and diagnostics of all new-generation Siemens drives with

only one tool.

STARTER supports the drives:

•SINAMICS

• MICROMASTER 420/430/440

• MICROMASTER 411/COMBIMASTER 411

•COMBIMASTER

SIMOTION SCOUT stand-alone software package

If STEP 7 is not installed, the SIMOTION SCOUT stand-alone

software package can be used. It also contains the components

of STEP 7 that are required for SIMOTION SCOUT as well as the

license key for SCOUT stand-alone.

It is not possible to operate the SCOUT and SCOUT stand-alone

software packages on the same machine.

SIMOTION Kernel updates

SIMOTION Kernel updates for all SIMOTION platforms are

supplied on DVD and can then be copied from the PG/PC to the

SIMOTION Micro Memory Card (C2xx) or SIMOTION

CompactFlash card (SIMOTION D) or installed on the P350-3.

A PC card adapter is needed to write to the SIMOTION MMC

(Micro Memory Card) or the SIMOTION CF (CompactFlash

Card). Adapters can usually be found in PC shops and at

electronics shops.

With the device update tool, SIMOTION offers a user-friendly

solution to update SIMOTION devices. SIMOTION D4x5-2 can

also be updated using a USB stick.

SIMOTION Motion Control System

SIMOTION engineering software

SIMOTION SCOUT software package

9/83

Siemens PM 21 · 2013

■

Selection and ordering data

■

More information

A number of additional software products can be used in

conjunction with SIMOTION SCOUT. It must be ensured that

the corresponding versions of these software products are

compatible. Please consult the "Compatibility table of the soft-

ware products in the SIMOTION environment".

More information can be found on the Internet at

http://support.automation.siemens.com/WW/view/en/18857317

Description Order No.

SIMOTION SCOUT software package

SIMOTION SCOUT V4.3 SP1

On DVD, including STARTER,

runtime software and documentation

Languages: English, French,

German, Italian

• Single license 6AU1810-1BA43-1XA0

• Upgrade 6AU1810-1BA43-1XE0

SIMOTION SCOUT V4.3 SP1

stand-alone

On DVD, including STARTER,

runtime software and documentation

Languages: English, French,

German, Italian

• Single license 6AU1810-1CA43-1XA0

• Upgrade 6AU1810-1CA43-1XE0

Software update service

The latest software version is necessary

• for SIMOTION SCOUT 6AU1810-0BA00-0XL0

• for SIMOTION SCOUT stand-alone 6AU1810-0CA00-0XL0

Optional packages for SIMOTION SCOUT

SIMOTION CamTool V3.0 SP2

High-performance graphical cam editor

Languages: English, German

• Single license, with data carrier 6AU1810-0FA30-2XA0

• Upgrade, with data carrier 6AU1810-0FA30-2XE0

DCC SIMOTION/SINAMICS V2.2 SP1

for SCOUT V4.3 SP1 /

STARTER V4.3 SP1

Graphic programming with

Drive Control Chart

DCC editor + DCB libraries for

use on SIMOTION and SINAMICS S120

• Single engineering license,

with data carrier 6AU1810-1JA22-1XA0

• Upgrade, with data carrier 6AU1810-1JA22-1XE0

DCC-SINAMICS V2.2 SP1

for STARTER V4.3 SP1

Graphic programming with

Drive Control Chart

DCC editor + DCB libraries for

use on SINAMICS S120

• Single engineering license,

with data carrier 6AU1810-1HA22-1XA0

• Upgrade, with data carrier 6AU1810-1HA22-1XE0

Description Order No.

SIMOTION Motion Control System

SIMOTION engineering software

SIMOTION SCOUT software package

SCOUT Workbench

9/84 Siemens PM 21 · 2013

■

Overview

The SCOUT Workbench is the common frame for all tools of the

engineering system. The Workbench is thus the central naviga-

tion point for the individual engineering steps. It is used for the

creation and management of SIMOTION projects and provides

a uniform and integrated view of all devices, data and programs.

The SCOUT Workbench:

Project navigator – Work area – Information area

• Project navigator (left): The project navigator displays the

technological tree structure of the project. All devices (control-

ler, drives, etc.), all technological objects (axes, cam tracks,

cams, etc.) and user programs are displayed in filterable

hierarchical views. From here, new objects/programs can be

created or existing ones called for modification.

• Work area (right): All editing tools of the engineering system

(parameterization dialogs, program editors, etc.) can be inte-

grated (SNAP IN) in this work area. This provides you with an

individual view adapted to the situation in a fixed outer frame

for each engineering task. If more than one window is open at

the same time, they can be arranged as required or you can

toggle between them by selecting the tabs.

• Detail area (bottom): The situation-dependent views for data

and messages provided by the detailed display can be

activated and deactivated. The data involve system variables

provided by the devices and the technological objects, the

peripheral data (inputs/outputs) and the user variables that

you have defined. Their current states for an online connection

with the SIMOTION device can be visualized. The message

view refers both to the messages and alarms reported online

from the SIMOTION devices and to warnings and faults

created during the program creation.

■

Benefits

7Integrated, function-oriented view optimized for ease-of-use

7Integrated intuitive engineering system

7Central data and program management, even for distributed

systems

7Function-oriented, technological project structure with

filterable views

7Fast access to individual engineering tools, e. g.

configuration, programming, and commissioning

■

Overview

One of the first engineering steps to define the automation

topology and assign parameters to the components and

networks is to create:

• Hardware configuration

• Network configuration

To do so, SCOUT uses the STEP 7 tools HW-Config and NetPro.

You make selections from a hardware catalog to combine all

required hardware components graphically in the work area,

assign parameters to the components, and create bus connec-

tions between the individual components. You are warned imme-

diately of any illegal inputs, so that only plausible configurations

can be generated.

SIMOTION SCOUT software package

Hardware and network configuration

SIMOTION Motion Control System

SIMOTION engineering software

SIMOTION SCOUT software package

Creation of technology objects

9/85

Siemens PM 21 · 2013

■

Overview

All SIMOTION controllers feature basic functions which are

predefined by the SIMOTION Kernel. The scope of the language

is compatible with the IEC 61131-3 standard and contains all of

the necessary PLC commands for I/O management, process or

machine control.

Additional functions such as positioning, synchronous opera-

tion, cams and temperature channels are available with loadable

technology packages.

These technology packages permit the generation of technol-

ogy objects which provide you with a very simple and uniform

view of the functions of the technology packages.

There are many technology objects, but all are generated,

configured and parameterized in the same way.

In addition, the technology objects have programming inter-

faces through which you can use the functionality from applica-

tion programs.

Working with technology objects

A brief description of the individual engineering steps will be

given using the example of the technology object "Axis".

Generating

A new axis object is generated by double-clicking the "Insert

New Axis" tab.

Configuration

A wizard helps to specify object properties such as:

• Name of the axis

• Functionality

(e.g. positioning axis or synchronized axis)

• Connection to the drive

(e.g. SINAMICS S120 over PROFIBUS DP or PROFINET IO or

an analog drive on SIMOTION C240)

After the axis has been generated or configured, it is displayed

in the project tree along with additional tabs for parameterizing

the axis and an option for generating other technological objects

associated with the axis (e.g. cam paths, measuring inputs).

Assigning parameters

By double-clicking the "Referencing" tab, for example, all

parameters for referencing can be set.

The "axis" object generated in this way also has a specified

number of system variables which can be displayed in the

detailed view when the axis is selected in the project tree.

The system variables are mainly used to visualize axis states

such as:

• Display of the following error

• Target position to be reached

• Motion status

(axis is accelerating, braking, motionless, etc.)

These system variables can also be used for:

• Online diagnostics

• Display on HMI

• Logging with the SIMOTION trace functionality

• Application programming through querying/comparing these

system variables

Application programs access the axis functionality with system

functions (selected from the command library), which are part of

the "axis" object when it is generated.

The command _pos(axis:=Axis1, position:=100, velocity:=123)

would cause axis "Axis 1" to move to position 100 with

velocity 123 (example for system function in Structured Text).

■

Benefits

7Easy generation of the technology object for determining the

quantity structure

-Axes

- Output cams and cam tracks

- Measuring inputs

- Cams, etc.

7Menu-guided parameterization, graphically supported for

easy understanding

7Easy visualization and access to functions through system

variables and system functions of the technology objects

7User-friendly diagnostic information for function optimization

of the technology objects

7Meaningful alarms in the form of numbers and plain text in the

event of errors

SIMOTION Motion Control System

SIMOTION engineering software

SIMOTION SCOUT software package

Creation of cams (basic)

9/86 Siemens PM 21 · 2013

■

Overview

A cam generally specifies the motion relationship between a

leading axis (master axis) and a following axis (slave axis).

Cams can also mirror velocity profiles, pressure characteristics

or valve characteristic compensation for hydraulic axes. The

cam technology object can process cams which are defined as

interpolation point tables or polynomial descriptions.

The basic scope of SCOUT contains editors to create simple

cams in the form of text in a table or using polynomials (VDI

wizard) in the form of graphics symbols with configuration

support.

Creation of cams

When the technological object "Cam" is generated, the type

"Interpolation point table" or "Polynomial" is defined.

• Interpolation point table:

With this type, the master and slave positions are entered in a

two-column table. It is also possible to use external interpola-

tion point tables (ASCII file, Excel table).

•Polynomials:

Polynomials describe motion rules in accordance with

VDI 2143. SIMOTION supports polynomials up to the 6th de-

gree. In polynomial mode, the cam is described by a number

of consecutive polynomials. Polynomials are entered in the

form of a polynomial table. Users can use a polynomial

description dialog and/or VDI wizard.

The result of the input is displayed in the right-hand side of the

window in the form of a curve in the coordinate system.

In addition, other parameters such as the interpolation type

between the curve support points or the scale of the cam can be

specified. The SIMOTION CamTool option package can be used

to display and optimize cams graphically.

■

Benefits

7Editors for simple cams are included in the basic scope of

functions of SCOUT

7Graphic visualization of the cam so that input errors can be

quickly identified

7Representation as interpolation point table with options to

transfer data from external sources (ASCII, Excel)

7Alternative: Representation by polynomials up to the 6th

degree with inputs supported by polynomial description

dialog and VDI wizard

SIMOTION Motion Control System

SIMOTION engineering software

SIMOTION SCOUT software package

Structured Text (ST)

9/87

Siemens PM 21 · 2013

■

Overview

The high-level language ST (Structured Text) provides all

language elements as text commands. This enables well-

structured applications to be created.

The basic scope of commands includes:

• Commands for data management

• Arithmetic functions

• Control structures

• Commands for accessing I/O and

• Communication functions

The addition of technology packages for Motion Control adds

powerful, extremely flexible Motion Control commands to the mix

(e.g.: _pos(...) for position-controlled positioning axes). The

system functions can be selected from a clearly arranged library

and can be used in the ST source by means of drag & drop.

An ST source file basically consists of continuous text. This text

can be structured by dividing it into sections. These sections

represent logical units of an ST source.

These sections can be:

• A program that is assigned to a runtime level

• A function block with its own memory

• A function without its own memory

Function blocks and functions are not allocated to a runtime

level, but are instead called in programs and supplied with

parameters.

■

Benefits

7Motion Control, PLC, and technology functions in one

language

7Well-structured programs with comment capability

7Powerful editing functions, such as syntax coloring and

automatic indenting

7Easy-to-use debug functions for online testing and

diagnostics: e. g. display of actual variable content of the

code sequence and break points selected in the editor.

SIMOTION Motion Control System

SIMOTION engineering software

SIMOTION SCOUT software package

Motion Control Chart (MCC)

9/88 Siemens PM 21 · 2013

■

Overview

MCC (Motion Control Chart) is a "flow diagram language" that

can be used to graphically formulate the process procedures of

production in a simple manner. The result is one or more flow

diagrams, comprising of MCC blocks that describe the time

sequence of the individual machine actions. Due to its special

means of expression, MCC (Motion Control Chart) is ideally

suited to programming sequential processes.

Motion Control Chart supports the simple description of the

motion sequences of machines with the help of powerful Motion

Control commands, such as reference axis, position axis,

synchronize or desynchronize cam, and many more.

Various MCC blocks are available for controlling the machine, for

example, if conditions must be fulfilled, I/O signals can be read

or set, calculations can be formulated and different control

structures such as condition (IF), cases (CASE) and loops

(WHILE, REPEAT UNTIL) can be programmed.

Several MCC programs may be created to describe different

process situations. For example, you can create one MCC

program to bring the machine to a defined initial state when it is

switched on, a second MCC program for the normal production

sequence, and a third MCC program to specify what the

machine is to do in the event of a fault.

All MCC blocks – a selection of the most important SIMOTION

functions – are available in toolbars. They are grouped accord-

ing to function and are automatically inserted in the flow diagram

at the point marked with a click. By clicking on different ele-

ments, individual dialog boxes are opened for further parameter-

ization. Of course, it is also possible to include individual com-

ments to document the process sequence. Functions from the

SIMOTION command library that are not individually offered as

MCC blocks can be used in an MCC program by means of a

special command.

■

Benefits

7Representation as graphical flowcharts make programming

especially easy

7Hierarchical command library for Motion Control, PLC, and

technology functions

7Control structures (IF, WHILE, CASE, etc.)

7Zoom-in functions for LAD, FBD and ST

7Subroutine calls (FB/FC)

7Structuring based on module creation, i.e. combination of

command sequences to form a module command. Clicking

on the module command invokes the corresponding

command sequence.

7Powerful test functions for ONLINE connection with the

SIMOTION controller such as graphical step tracing,

single-step mode and breakpoints.

SIMOTION Motion Control System

SIMOTION engineering software

SIMOTION SCOUT software package - Ladder

Diagram/Function Block Diagram (LAD/FBD)

9/89

Siemens PM 21 · 2013

■

Overview

A powerful editor for LAD/FBD programming is available for

ladder diagrams (LAD) or function block diagrams (FBD).

LAD/FBD also include commands for SIMOTION control using

standard logic functions. It is recommended that motion control

tasks are programmed with PLCopen blocks. Also, blocks which

have been programmed in other SIMOTION languages can be

called from LAD/FBD. User-friendly functions such as "on the fly"

variable declarations or automatic syntax checks are available

when programming in LAD or FBD. It is possible to switch over

between LAD and FBD in the editor at any time. Any program

can be viewed and processed in either LAD or FBD.

■

Benefits

7The LAD/FBD blocks are stored in the SIMOTION project

7Existing PLCopen, ST, LAD/FBD or MCC blocks can be called

from within the LAD/FBD program.

7Network titles and comments are available.

7Special functions such as automatic syntax checking or "on

the fly" variable declaration can be activated.

7The commands are loaded from a library

For startup and troubleshooting purposes, the status of the

LAD/FBD program is displayed while in monitoring mode.

In addition, break points can also be defined in LAD/FBD

programs.

SIMOTION Motion Control System

SIMOTION engineering software

SIMOTION SCOUT software package

Diagnostics for testing and commissioning

9/90 Siemens PM 21 · 2013

■

Overview

SCOUT includes a number of diagnostic tools to make testing

and startup of SIMOTION applications as simple as possible:

• Device diagnostics can be used to display program execution

status, system load and memory usage.

• The diagnostic buffer is used to log the fault history. The

following events are logged in the diagnostic buffer of the

SIMOTION device:

- All system status changes (RUN, STOP, etc.)

- System interrupts with date and time.

• All error messages related to technology objects, e.g. axis

errors, are displayed in the Alarms window of SCOUT with the

fault number and description.

• All SIMOTION system and application variables can be

dynamically updated, monitored and controlled while online

with the SIMOTION controller.

• All programming errors are displayed with the location and

cause during compilation.

• The status display for programs with possible break points

(LAD/FBD, MCC, ST) and additional step-by-step tracing

(MCC) helps the user to troubleshoot and optimize their code.

During program execution, the values of the variables are

displayed as they arise, not only at the end of the cycle when

the sum of all changes has been implemented.

• Watch tables can be used to combine important variables of

different objects in the project to monitor them, even those of

different SIMOTION devices.

Axis control panel

The axis control panel can be used to commission the axes

with SIMOTION SCOUT. The axes can also be traversed and

optimized without any user programs.

Trace function

The most powerful tool for testing and commissioning is the

trace function integrated in SCOUT.

In this manner, a selection of any of the data in the system (user

variables, I/O variables, data of the technology objects such as

actual position of an axis) can be recorded and traced, real-time.

Up to 32 signals are possible in test mode.

Each SIMOTION device has a trace buffer which can be config-

ured with the trace functionality of SCOUT. When the trace is

started, the configured data is logged in the SIMOTION device.

On completion of the trace, the contents of the trace buffer is

read by SCOUT and displayed graphically.

Configuring the trace function

The trace function can be configured using the following

parameters:

• Trigger condition (e.g. rising edge of a definable signal) and

pre-trigger

• Time Limit Recording (a multiple of the basic cycle of the

SIMOTION device)

• Continuous Recording (or endless trace with ring buffer)

• System variables to be logged (system, I/O and user

variables)

Evaluating the trace data

The logged data is displayed in the form of graphs over time for

evaluation. The following functions are offered here:

• Different colors can be selected for the curves. Curves can be

switched off and on again.

• The zoom function can be used to show details.

• Rulers support the measuring of, for example, signal level and

duration.

• Possible changes can be viewed by superimposing measur-

ing curves from different trace logs.

Apart from recording, the trace function also offers a "function

generator" and mathematical functions.

The traced curves can be stored or exported to Microsoft Excel

as a table for further evaluation. Of course, the plots can also be

stored for documentation purposes, inserted in documents or

printed out.

Automatic optimization of the control loops

Automatic optimization of the control loops makes commission-

ing of the axes and drives particularly easy. For SINAMICS S120

drives, the parameters for the speed controller and the position

controller are automatically determined (with DSC).

Integrated measuring functions

The integrated measuring functions support the recording of, for

example, step responses for optimization as well as the detec-

tion of electromagnetic weak points or resonant frequencies (us-

ing, for example, bode diagrams and FFT analysis). Electronic

filters can be optimally placed at these resonant frequencies to

achieve higher dynamics.

SIMOTION Motion Control System

SIMOTION engineering software

Optional packages for SIMOTION SCOUT

Optional CamTool package (graphical cam editor)

9/91

Siemens PM 21 · 2013

■

Overview (continued)

Comparison function for projects

With SCOUT V4.1 SP2 and higher, it is possible to compare and,

if necessary, merge the components of different projects.

It is therefore possible to perform a CPU-based comparison

between the objects of a project.

An overview of the differences between objects is displayed.

Objects with differences can be merged.

If necessary, to a highly detailed degree: Objects can be

merged right down to data level also for individual data.

Advantages for practical working with SIMOTION:

• Online/offline comparisons allow the target device and project

to be merged

• Offline/offline comparisons make it possible to merge

programs

• Detailed differences between data can be identified in the

detailed comparison

• Data missing from the engineering project are easy to restore

if the source data are stored in the target system.

■

Benefits

7Numerous easy-to-use and expressive diagnostic tools are

fully integrated in SCOUT

7Extremely useful support with optimizing and troubleshooting

7All information can be printed in the form displayed on the

screen for documentation purposes

7Axis control panel for commissioning and optimizing the axes

without the need for an application program

7Automatic controller optimization for fast commissioning

7Comprehensive, integrated comparison functions for the ST,

MCC and LAD/FBD languages enable differences to be

identified between projects or between the current project

and the device.

■

Overview

SIMOTION CamTool is a powerful, graphical editor for creating

and optimizing cams.

SIMOTION CamTool can be used as an expansion package for

SIMOTION SCOUT and is completely integrated in the SCOUT

environment.

■

Benefits

7Precise, graphic display of the CAM profile

7Entries can be made quickly and easily by inserting curve

elements with drag & drop operation

7Fast and easy optimization of the curve by means of "dragging

the profile"

7Simultaneous display of position, speed, acceleration, and

jerk characteristics immediately indicates the effect on the

maximum speed, the required motor torque, and the

mechanical load

7Curve can also be optimized in relation to speed,

acceleration, or jerk

7Basic principles of motion correspond to VDI 2143

■

Function

• The curve is displayed graphically in an x-y-diagram (posi-

tions of master and following axes). The curve profile is first

roughly entered here with individual elements such as fixed

points, lines and support points. Lines can be entered as

straight lines, sine curves or arc sine curves.

• SIMOTION CamTool then connects these individual elements

automatically to form a continuous curve. The transitions be-

tween the individual curve sections are automatically shaped

as smooth as possible.

• You can optimize the curve by simply moving the specified

curve sections with the mouse. The curve profile immediately

adapts to your changes.

• In addition, SIMOTION CamTool can display the effects on the

velocity, acceleration and jerk of the following axis over the

motion of the leading axis.

• SCOUT can be used to convert cams created with CamEdit to

the format used by CamTool or vice versa.

SIMOTION SCOUT software package

Diagnostics for testing and commissioning

SIMOTION Motion Control System

SIMOTION engineering software

Optional packages for SIMOTION SCOUT

Optional Drive Control Chart (DCC) package

9/92 Siemens PM 21 · 2013

■

Overview

The Drive Control Chart (DCC) option packages for SIMOTION

and SINAMICS extend the possibilities of SIMOTION SCOUT

and the STARTER commissioning tool to graphically configure

technology functions using predefined function blocks.

Multi-instance function blocks are selected from a library and are

graphically interconnected using drag & drop capability. The

function block library comprises of a large number of control,

calculation and logic blocks as well as extensive open-loop and

closed-loop control functions. Numerous calculation functions,

such as summation, division and minimum/maximum evaluation

are available for monitoring and evaluating numeric variables.

Drive Control Chart (DCC) does not limit the number of functions

that can be used.

■

Benefits

7Clear visualization of technical control structures

7High degree of reusability of previously created plans

7Graphical editor for configuring open-loop and closed-loop

control functions which can be operated without any

programming know-how

7With Drive Control Chart for SIMOTION, closed-loop control

structures can be programmed almost without constraints.

These can then be combined with other programs to form

complete program functionality.

7Drive Control Chart for SINAMICS S120 provides a convenient

basis for implementing drive tasks directly in the converter.

SIMOTION Motion Control System

SIMOTION engineering software

Free extras for SIMOTION SCOUT

SIMOTION easyProject project generator

9/93

Siemens PM 21 · 2013

■

Overview

You can achieve greater efficiency in the development and

commissioning of your machines by using the project generator

SIMOTION easyProject.

SIMOTION easyProject is included on the SIMOTION Utilities &

Applications DVD that is supplied free of charge with

SIMOTION SCOUT.

In recent years, a wide variety of applications have been realized

in different sectors using the SIMOTION Motion Control system,

and various basic, technology and application modules have

been developed and optimized for this purpose. These well-

proven software modules that have become quasi standard can

now be integrated into a new or existing engineering project in

an extremely easy manner with the project generator. This is

done by first selecting the SIMOTION components and then the

required modules in simple selection screens. Their integral or

predefined functions are then configured with a mouse click

and, finally, the project as a whole is generated. This saves a lot

of programming time and at the same time creates the precon-

ditions for a uniform and therefore standardized project struc-

ture.

The basic functions that can be used in practically every

SIMOTION application and which are provided by the project

generator include:

• Message handling:

Centralized error message handling for all components in-

cluding archiving and display on a visualization system (HMI)

• Startup check:

A startup check for all connected components (provides infor-

mation on the status of the configured devices connected to

the various field buses or internal connections)

•OMAC:

Operating mode management

• Ethernet communication:

Machine-to-machine coupling via Ethernet communication

over TCP/IP

• Axis function block:

Easy activation of basic Motion Control functions (as far as

cam synchronization) via a central (generic) axis function

block

• Interpreter:

A sequence interpreter for easy configuration of machine

sequences using tables

These basic functions alone remove most of the manual

programming and configuration work that would normally be

necessary and consequently minimize the associated working

time and possibilities for error.

Automatic generation of the project

When the project is generated, all the necessary technology

objects (TOs) are created and connected, libraries and program

modules (only the currently selected modules) are automatically

linked into the project and the programs are assigned to the

respective execution levels. This results in a loadable and exe-

cutable SIMOTION SCOUT project comprising the required ma-

chine functions without having to write a single line of code. You

can concentrate fully on the special functions of your machine

(sequence, signal connections, special functions, etc.) saving a

considerable amount of work so that you achieve your objective

much more quickly.

SIMOTION easyProject is also designed so that it can integrate

its own blocks in this generic workflow of the automatic applica-

tion creation.

The uniform structure also makes a project generated in this

manner extremely easy to maintain. The generated program

modules can be edited and modified by the user. If standard

modules of the project have been changed centrally or if new

standard modules need to be linked into the project, this can be

done simply by running the project generator again. During the

generator run, the originally used and, where applicable, up-

dated modules and libraries will be recognized and displayed.

These can then also be updated in the project automatically.

SIMOTION Motion Control System

SIMOTION engineering software

Free extras for SIMOTION SCOUT

SIMOTION easyProject project generator

9/94 Siemens PM 21 · 2013

■

Overview (continued)

Web-based diagnostics

The project generator also creates specific web pages for the

separate modules. These can be loaded into the SIMOTION

controller, if required, to offer additional customized diagnostic

functions to those provided by every device via the integrated

web server and the standard diagnostic pages of SIMOTION IT.

This means that commissioning or specific service tasks can

also be performed using a standard web browser – without the

need for an engineering system. It is of no consequence here

whether you connect to the controller via a network cable or via

a secure connection over the Internet (e.g. through a VPN

tunnel).

Standard blocks – two examples:

1. Axis function block:

The standard axis function block covers a range of require-

ments that concern the activation of axis technology objects

and simplifies programming, commissioning and testing of

each axis object due to its central interface. The integrated

HTML control panel enables the axes controlled by the axis

function block to be tested easily – without any HMI or

engineering system.

2. Message handling

The core tasks of the generic basic module "Message

handling" include the chronological collection of system,

TO, drive, I/O and user messages and their conditioning for

display on the operator panel – or their direct display via a web

browser.

The specific diagnostic pages are a huge advantage during

initial commissioning, but particularly in the event of a fault or

during servicing, because fault states can be diagnosed with-

out the need for an engineering system and standstill times

can be minimized.

Modular machine functions

The project generator also supports the modularization of ma-

chine functions in accordance with the specification of inter-

national standard ISA-88. The module structure is precisely

defined in ISA-88. This ensures a simple and uniform structure

for machines. Basic, technology and application modules are

combined to implement clearly comprehensible modularization

for machines using functional units. You can find details about

this in chapter Sector-specific solutions.

SIMOTION Motion Control System

SIMOTION engineering software

Free extras for SIMOTION SCOUT

SIMOTION Utilities & Applications

9/95

Siemens PM 21 · 2013

■

Overview

The SIMOTION Utilities & Applications DVD, which is available

free of charge, provides you with a wide range of valuable

information and tools for SIMOTION:

• SIMOTION easyProject project generator

• Applications

•SIMOTIONIT

•FAQs

•Examples

• Tools and documentation

• Scripts for SIMOTION

SIMOTION Utilities & Applications are part of the scope of

delivery of SIMOTION SCOUT.

SIMOTION easyProject project generator

See "SIMOTION easyProject project generator" for further

details.

Applications for sector-specific solutions

So that you don't have to reinvent the wheel every time, we have

developed a range of applications for SIMOTION that are avail-

able as well-documented master solutions and that can be

easily adapted to your specific projects with minimal engineer-

ing outlay.

Simple faceplates are also included for the visualization system

WinCC flexible that have been adapted to the application. The

diagram of industrial sector solutions shown below provides an

overview of the applications that are currently available.

SIMOTION IT

Diagnostics, maintenance and operation can be performed

locally or remotely using a PC with standard browser installed

thanks to the web servers available on all SIMOTION devices.

You will find helpful examples and tools here for creating your

own HTML pages.

FAQs (Frequently Asked Questions)

We provide answers to the questions most frequently asked

about SIMOTION.

Examples

Based on comprehensively documented examples, we make it

easy to get started with SIMOTION and show how even complex

applications can be easily implemented.

Tools and documentation

You will find easy-to-use tools for many tasks, as well as detailed

documentation.

Scripts for SIMOTION

Numerous engineering tasks can be automated with the

SIMOTION scripting function. The selection of documents and

scripts provided here show how you can use scripts in your

projects.

A number of example scripts that you can implement directly will

make working with SIMOTION even easier.

SIMOTION Motion Control System

SIMOTION engineering software

Free extras for SIMOTION SCOUT

SIMOTION Utilities & Applications

9/96 Siemens PM 21 · 2013

■

Overview (continued)

Projectgenerator SIMOTION easyProject

HTML- for commissioning

DPV1 ServicesEnergy AcquisitionInterpreterStartup Check

HMI TemplateOMACEthernet Communication Message HandlingAxis Function Block

Basic Functions SIMOTION easyBasics

SIMOTION

Modulare Maschine

OPL

Weihenstephan

Standards

OPL

Line Integration

OPL

Software Toolbox

Handling

Solutions for industrial sectors

SIMOTION

Chem.Fibre Spinning

SIMOTION

Winder

SIMOTION

Ring Spinning

SIMOTION

Segment Gravure

SIMOTION

Splice Control

SIMOTION

Comber

SIMOTION

Segment Offset

SIMOTION

Transfer

SIMOTION

Rotary Knife

SIMOTION

Draw Frame

SIMOTION

AddOn WebAccu

SIMOTION

Roll Feed

SIMOTION

Line Axis

SIMOTION

Roving Frame

SIMOTION

Baggers + Wrappers

SIMOTION

AddOn Sigate

SIMOTION

Feeder

SIMOTION

Traversing Drive

SIMOTION

Warping

SIMOTION

Cartoner

SIMOTION

AddOn ReelStand

SIMOTION

Servo Press

SIMOTION

Flying Saw

SIMOTION

Weaving

SIMOTION

Intelligent Belt

SIMOTION

Print Standard

SIMOTION

Hydr. deep draw

SIMOTION

Converting Library

PlasticsTextilePackagingPrintingMetal FormingConverting

SIMOTION

Print Diag

SIMOTION

Vision Integration

SIMOTION

Handling Basic

SIMOTION

TopLoading

SIMOTION

Handling Toolbox

SIMOTION

Injection Molding

Electric

G_PM10_EN_00218

SIMOTION Motion Control System

Overview of SIMOTION functions

9/97

Siemens PM 21 · 2013

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

System cycles

PROFIBUS cycle SIMOTION D:

For integrated drives and

drives on connected

CX32-2:

0.5 ... 8 ms

C240/C240 PN:

1 ... 8 ms

(in 0.25 ms

steps)

P350-3 DP:

1 ... 8 ms

(in 0.125 ms

steps)

1 ... 8 ms

(in 0.125 ms

steps)

1 ... 8 ms

(in 0.125 ms

steps)

PROFINET cycle C240 PN:

0.5 ... 4 ms

(in 0.25 ms

steps)

P320-3,

P350-3 PN:

0.25 ... 4 ms

(in 0.125 ms

steps)

D410-2

DP/PN:

0.25 ... 4 ms

(in 0.125 ms

steps)

D4x5-2

DP/PN:

0.25 ... 4 ms

(in 0.125 ms

steps)

Position control and

interpolation cycle

• Minimum position control cycle The position control cycle

(SERVO) includes the

position controller, the

actual-value and setpoint

system and the axis

monitoring functions.

0.5 ms 0.25 ms 1/0.5 ms 3) 0.5/0.25 ms 1)

• Position control cycle to

PROFIBUS cycle 1:1, 2:1 1:1, 2:1 1:1 ... 8:1 1:1 ... 8:1

• Position control cycle to

PROFINET cycle 1:1 ... 16:1 1:1 ... 16:1 1:1 ... 16:1 1:1 ... 16:1

(1:1) 2)

• Interpolation cycle 1 (IPO) to

position control cycle

The axis motion control

functions are performed in

the interpolation cycle. The

position control cycle and

the interpolation cycle are a

multiple of the PROFIBUS/

PROFINET cycle.

The transformation ratios

are adjustable.

1:1 ... 6:1 1:1 ... 6:1 1:1 ... 6:1 1:1 ... 6:1

(1:1 ... 4:1) 2)

• Interpolation cycle 2 (IPO2) to

interpolation cycle 1 (IPO1) 2:1 ... 64:1 2:1 ... 64:1 2:1 ... 64:1 2:1 ... 64:1

• Fast position control cycle

(SERVOFast) to PROFINET cycle Values with SERVOFast

and IPOFast activated

for D435-2 DP/PN,

D445-2 DP/PN and

D455-2 DP/PN

(for details, see

SIMOTION D4x5-2 manuals)

–––1:1

• Fast interpolation cycle (IPOFast) to

fast position control cycle

(SERVOFast)

–––1:1 ... 4:1

Notes:

Communication via PROFIBUS and PROFINET

The availability of a PROFIBUS or PROFINET interface depends on the controller variant implemented.

The SIMOTION controllers are equipped with PROFIBUS and/or PROFINET as standard.

For SIMOTION P350-3 DP, PROFINET can be retrofitted with an optional communication module.

This must be taken into account with regard to the connection possibilities and functions over PROFIBUS and PROFINET.

SIZER for Siemens Drives engineering tool

The performance requirements for a SIMOTION application can be estimated using the engineering tool SIZER for Siemens Drives.

For more information about SIZER for Siemens Drives, refer to chapter System description – Dimensioning.

1) 0.5 ms in combination with integrated SINAMICS S120 drives, 0.25 ms in combination with the runtime levels SERVOFast and IPOFast

(D435-2 DP/PN, D445-2 DP/PN and D455-2 DP/PN only).

2) Values in brackets with SERVOFast and IPOFast activated (for details, see SIMOTION D4x5-2 manuals)

3) 1 ms when using the TO axis and the integrated drive control

SIMOTION Motion Control System

Overview of SIMOTION functions

9/98 Siemens PM 21 · 2013

Dynamic Servo Control (DSC)

• With Dynamic Servo Control (DSC),

the control loop of the position

controller is located in the drive

(with cycles of 125 µs or higher).

With SINAMICS S120 and

SIMODRIVE drives ! ! ! !

Memory for system data

• Memory media MMC:

Micro Memory Card

CF: CompactFlash card

HDD: Hard Disk Drive

MMC

64 MB P320-3: CF

4 GB

P350-3: HDD

40 GB

1 GB CF

1 GB

• Retentive memory

(for retained user data/retain

variables)

SIMOTION P:

with UPS up to 256 KB 107 KB 15 KB 108 KB D425-2/

D435-2:

364 KB

D445-2/

D455-2:

512 KB

• Permanent memory

(for user data/data storage on

exchangeable memory medium)

50 MB Any, depen-

dent on

memory

configuration

300 MB 300 MB

• RAM disk

(load memory for user data/

for downloading the configuration

and programs)

Memory sizes can be

configured with

SIMOTION P

29 MB 18 MB 31 MB D425-2:

31 MB

D435-2:

41 MB

D445-2:

56 MB

D455-2:

76 MB

•RAM

(user memory for code and data) D410-2 and D4x5-2:

additional 20 MB for

Java applications

50 MB 37 MB

Adjustable to

a maximum of

200 MB

MB D425-2:

48 MB

D435-2:

64 MB

D445-2:

128 MB

D455-2:

256 MB

Address ranges

• Logical I/O address space in KB 44816

• Physical I/O address space

in KB When PROFIBUS and

PROFINET are used, the

total address space

applies

D4x5-2 DP/PN:

If CBE30-2 is used as a

second PROFINET inter-

face, 2 × 4 KB physical

address space is avail-

able.

- PROFIBUS: max. per ext. subnet

each for inputs and outputs 1 1 1 1

- PROFINET: max. for inputs and

outputs (each) 4 4 4 4

• Permanent process image for

background task (I/O variables)

in bytes

64 64 64 64

• Additional configurable process

image for each cyclic task

(I/O variables)

! ! ! !

• Address space per PROFIBUS DP

station in bytes 244 244 244 244

• Address space per PROFINET

device in bytes 1400 1400 1400 1400

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

SIMOTION Motion Control System

Overview of SIMOTION functions

9/99

Siemens PM 21 · 2013

Drives on SIMOTION

Maximum number of axes Higher number of axes

possible using multiple

synchronized devices

32 axes 128 axes 8 axes (typ. 2

to 3 axes) D425-2:

16 axes

D435-2:

32 axes

D445-2:

64 axes

D455-2:

128 axes

Integrated drive control

The drive control integrated in

SIMOTION D is based on

SINAMICS S120 Control Units:

• With SIMOTION D410-2 on the

CU310-2 Control Unit,

firmware version V4.x

• With SIMOTION D4x5-2/CX32-2

on the CU320-2 Control Unit,

firmware version V4.x

The BOP20 Basic Operator Panel

and the basic positioner EPos are not

supported by the integrated drive

control.

SIMOTION D4x5-2:

CX32-2 Controller

Extension can be used

to provide additional

drive controls:

D425-2: max. 3 CX32-2

D435-2: max. 5 CX32-2

D445-2: max. 5 CX32-2

D455-2: max. 5 CX32-2

Per CX32-2:

Servo: 1..6

Vector: 1..6

V/f: 1..12

(alternatively)

––Servo: 1

Vector: 1

V/f: 1

(alternatively)

Servo: 1..6

Vector: 1..6

V/f: 1..12

(alternatively)

Speed-controlled axis over

PROFIBUS DP SIMOTION D:

SINAMICS as the

standard drive

technology

! – (P320-3)

!(P350-3 DP)

"(P350-3 PN)

! !

• SINAMICS S/SINAMICS G

(servo, vector control)

• SIMODRIVE 611 universal

•MICROMASTER/

MICROMASTER Vector

• Drives with speed profile in

accordance with standard

message frames

(PROFIdrive profile 1-6)

Intelligent positioning motor

over PROFIBUS DP Standard functions

available in SCOUT

command library

! – (P320-3)

!(P350-3 DP)

"(P350-3 PN)

! !

• SIMODRIVE POSMO A

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

1) In principle, a fourth or sixth CX32-2 Controller Extension can also be connected, e.g. for implementing modular machine concepts.

In this case, no drives/drive components can be connected any longer to the integrated drive control of the SIMOTION D4x5-2.

All drives must then be operated via the Controller Extensions.

SIMOTION Motion Control System

Overview of SIMOTION functions

9/100 Siemens PM 21 · 2013

Drives on SIMOTION (continued)

Position-controlled axis over

PROFIBUS DP with PROFIdrive SIMOTION D:

SINAMICS as the

standard drive

technology

! (C240)

! (C240 PN) – (P320-3)

!(P350-3 DP)

"(P350-3 PN)

! !

• SINAMICS S110 (blocksize format)

- Servo control

• SINAMICS S120 (blocksize,

booksize and chassis formats)

- Servo control Also linear motor 1)

- Vector control With external encoder

(limited dynamic

response)

• SIMODRIVE 611 universal Also linear motor 1)

• MICROMASTER MM4 With external encoder

(limited dynamic

response)

• Certified servo/vector/stepper drives

in acc. with standard message

frames (PROFIdrive profile 1-6)

Speed and position-controlled axis

over PROFINET IO with IRT

(PROFIdrive)

– (C240)

!(C240 PN) !(P320-3)

"(P350-3 DP)

!(P350-3 PN)

– D410-2 DP

!D410-2

DP/PN

– D4x5-2 DP

!D4x5-2

DP/PN

• SINAMICS S110 (blocksize format)

- Servo control

• SINAMICS S120

(blocksize, booksize and chassis

formats)

- Servo control Also linear motor 1)

- Vector control With external encoder

(limited dynamic

response)

• Certified servo/vector/stepper drives

in acc. with standard message

frames (PROFIdrive profile 1-6)

Analog interface

with ±10 V setpoint interface

• Via onboard drive interface Configuration either as

analog or stepper drive 4 (C240)

– (C240 PN) – – –

• Via ADI 4

(Analog Drive Interface for 4 axes) See chapter

SIMOTION I/O

components.

! – (P320-3)

!(P350-3 DP)

"(P350-3 PN)

! !

• Via IM 174

(Interface Module for 4 axes) ! – (P320-3)

!(P350-3 DP)

"(P350-3 PN)

! !

Hydraulic drives

over ±10 V setpoint interface

• Via onboard drive interface 4 (C240)

– (C240 PN) – – –

• Via ADI 4

(Analog Drive Interface for 4 axes) ! – (P320-3)

!(P350-3 DP)

"(P350-3 PN)

! !

• Via IM 174

(Interface Module for 4 axes) ! – (P320-3)

!(P350-3 DP)

"(P350-3 PN)

! !

• Analog outputs through I/O ! ! ! !

• Encoders through I/O ! ! ! !

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

1) See chapter SIMOTICS linear and torque motors.

SIMOTION Motion Control System

Overview of SIMOTION functions

9/101

Siemens PM 21 · 2013

Drives on SIMOTION (continued)

Stepper drives Configuration either as

analog or stepper drive

• Onboard pulse direction interface

for stepper drives 4 (C240)

– (C240 PN) – – –

• Via IM 174

(Interface Module for 4 axes) ! – (P320-3)

!(P350-3 DP)

"(P350-3 PN)

! !

Encoders on SIMOTION

Measuring systems that can be

connected over the integrated

interface

See chapter

Measuring systems.

• Quantity SIMOTION D/CX32-2:

Encoder connection via

DRIVE-CLiQ

4 (C240)

– (C240 PN) – 1 –

• Absolute encoder with SSI interface !(C240)

–(C240 PN) –! –

• Incremental measuring systems C240: TTL

D410-2: TTL/HTL !(C240)

–(C240 PN) –! –

Measuring systems that can be

connected over the bus

• Resolver, absolute encoder

(SSI and EnDat), incremental

encoder (TTL and sin/cos)

Connected through

drive or

ADI 4/IM 174

(ADI 4/IM 174 for SSI

absolute encoder and

TTL incremental encoder)

! ! ! !

Connection options for

2nd encoder (external encoder)

• Via onboard interfaces !(C240)

–(C240 PN) –! –

• Via SINAMICS S110/S120 SIMOTION D/CX32-2:

Encoder connection via

DRIVE-CLiQ

! ! ! !

• SIMODRIVE 611 universal over

2nd axis control (2-axis module) Option for

SIMODRIVE 611 universal ! ! ! !

• Isochronous PROFIBUS encoder See chapter

Measuring systems. ! ! ! !

• PROFINET encoder with IRT See chapter

Measuring systems. –(C240)

!(C240 PN) ! (P320-3)

"(P350-3 DP)

! (P350-3 PN)

– D410-2 DP

!D410-2

DP/PN

– D4x5-2 DP

!D4x5-2

DP/PN

• Encoder on ADI 4

(Analog Drive Interface for 4 axes) At least one electric or

hydraulic axis must be

configured on

ADI 4/IM 174.

! – (P320-3)

! (P350-3 DP)

"(P350-3 PN)

! !

• Encoder on IM 174

(Interface Module for 4 Axes) ! – (P320-3)

! (P350-3 DP)

"(P350-3 PN)

! !

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

SIMOTION Motion Control System

Overview of SIMOTION functions

9/102 Siemens PM 21 · 2013

Measuring inputs

On-board measuring inputs

• Quantity C240: 2+4

C240 PN:4 – 8 16

• Reproducibility 6 µs –Typ. 5 µs 5 µs

Measuring inputs on the drives

• SIMODRIVE 611 universal 1/axis 1/axis 1/axis 1/axis

• SINAMICS S110 (CU305) 2/closed-loop

control 2/closed-loop

control 2/closed-

loop control 2/closed-loop

control

• SINAMICS S120 (CU310-2) 8/closed-loop

control 8/closed-loop

control 8/closed-

loop control 8/closed-loop

control

• SINAMICS S120 (CU320-2) 8/closed-loop

control 8/closed-loop

control 8/closed-

loop control 8/closed-loop

control

• SIMOTION CX32-2

D425-2: max. 3 CX32-2

D435-2: max. 5 CX32-2

D445-2: max. 5 CX32-2

D455-2: max. 5 CX32-2

–––4/closed-loop

control

• Over TM15 Terminal Module on

SINAMICS S120 or

SIMOTION D/CX32-2

See chapter

SIMOTION I/O

components.

- Number of measuring inputs per

Terminal Module, max. 24 24 24 24

- Reproducibility 125 µs 125 µs 125 µs 125 µs

• Over TM17 Terminal Module

High Feature on SINAMICS S120 or

SIMOTION D/CX32-2

- Number of measuring inputs per

Terminal Module, max. 16 16 16 16

- Reproducibility ≤ 1 µs ≤ 1 µs ≤ 1 µs ≤ 1 µs

Output cams

High-speed output cams

(hardware-supported output cams

with higher resolution)

• On-board output cams ! – ! !

- Reproducibility 70 µs –Typ. 125 µs 10 µs

• Over TM15 Terminal Module

on SINAMICS S120 or

SIMOTION D/CX32-2

See chapter

SIMOTION I/O

components.

- Reproducibility 125 µs 125 µs 125 µs 125 µs

• Over TM17 Terminal Module

High Feature on SINAMICS S120 or

SIMOTION D/CX32-2

- Reproducibility ≤ 10 µs ≤ 10 µs ≤ 10 µs ≤ 10 µs

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

1) In principle, a fourth or sixth CX32-2 Controller Extension can also be connected, e.g. for implementing modular machine concepts.

In this case, no drives/drive components can be connected any longer to the integrated drive control of the SIMOTION D4x5-2.

All drives must then be operated via the Controller Extensions.

SIMOTION Motion Control System

Overview of SIMOTION functions

9/103

Siemens PM 21 · 2013

Output cams (continued)

Standard output cams

(update in position controller or

IPO cycle, reproducibility of the output

cam depends on the implemented

I/O)

• On-board output cams ! – ! !

• Over TM15/TM17 Terminal Module

High Feature on SINAMICS S120 or

SIMOTION D/CX32-2

See chapter

SIMOTION I/O

components.

! ! ! !

• Over S7-300 backplane bus of

SIMOTION C ! – – –

• Over PROFIBUS DP ! – (P320-3)

!(P350-3 DP)

"(P350-3 PN)

! !

• Over PROFINET IO –(C240)

! (C240 PN) !(P320-3)

"(P350-3 DP)

!(P350-3 PN)

– D410-2 DP

!D410-2

DP/PN

– D4x5-2 DP

!D4x5-2

DP/PN

• Output to internal system variable ! ! ! !

Integrated I/O interfaces

Programmable digital inputs/

outputs

(can be parameterized individually as

either input or output)

Further inputs/outputs can

be implemented for out-

put cam or measuring

inputs via the TM15 or

TM17

High Feature Terminal

Modules.

––816

• of which for output cam, max. – – 8 8

• of which as measuring inputs, max. ––816

Digital inputs

(fixed inputs, cannot be

parameterized)

D410-2:

The 3 F-DI can also be

used as 6 DI.

18 –5 + 6 (3 F-DI) 12

• of which inputs with specific

functions

- Measuring inputs, max. 2+4 (C240)

4 (C240 PN) – – –

- External zero mark signal for

referencing, max. 4(C240) – – –

- Fail-safe digital inputs (F-DI) – – 3 –

Digital outputs

(fixed outputs, cannot be

parameterized)

D410-2:

The F-DO can also used

as DO.

8 – 1 (1 F-DO) –

• of which for outputs with specific

functions

- High-speed outputs of output

cams, max. 8 – – –

- Fail-safe digital outputs (F-DO) – – 1 –

Relay outputs with specific

functions

• Controller enable 4 (C240) – – –

•Ready 1 – – –

Analog inputs

SIMOTION D:

D410-2: Also over TM31

D4x5-2: Over TM31 or TB30

See chapter

SIMOTION I/O

components.

– –1 (on-board)

" (TM31) "

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

SIMOTION Motion Control System

Overview of SIMOTION functions

9/104 Siemens PM 21 · 2013

Integrated I/O interfaces (continued)

Analog outputs

SIMOTION C240:

Can be used as drive interface or

standard analog outputs.

SIMOTION D:

D410-2: Over TM31

D4x5-2: Over TM31 or TB30

See chapter

SIMOTION I/O

components.

4 (C240) –" "

Pulse direction interface for

stepper drives SIMOTION C240:

Configuration either as

analog or stepper drive.

4 (C240) – – –

SIMOTION C centralized I/O modules

• Centralized I/O modules per system,

max. 16 – – –

• Central/expansion rack, max. SIMOTION C:

max. two-tier configura-

tion with IM 365 interface

module

" – – –

• Connectable central

SIMATIC S7-300 I/Os For suitable modules

see chapter

SIMOTION I/O

components.

! – – –

Connectable distributed I/O modules

Distributed I/O

(over PROFIBUS DP) For suitable modules

see chapter

SIMOTION I/O

components.

! – (P320-3)

!(P350-3 DP)

"(P350-3 PN)

! !

• SIMATIC ET 200S Isochronous:

• SIMATIC ET 200pro SIMATIC ET 200S

• SIMATIC ET 200M SIMATIC ET 200M

ADI 4

IM 174

• SIMATIC ET 200eco

•ADI 4

(Analog Drive Interface for 4 Axes)

• IM 174

(Interface Module for 4 Axes)

• All certified standard slaves

(DP-V0, DP-V1, DP-V2)

Distributed I/O

(over PROFINET IO) –(C240)

!(C240 PN) !(P320-3)

"(P350-3 DP)

!(P350-3 PN)

– D410-2 DP

!D410-2

DP/PN

– D4x5-2 DP

!D4x5-2

DP/PN

•TMC Isochronous:

SIMATIC ET 200S

SIMATIC ET 200SP

(available soon)

TMC

• SIMATIC ET 200S, ET 200SP

• SIMATIC ET 200M

• SIMATIC ET 200pro

• SIMATIC ET 200eco PN

• All certified PROFINET devices

SINAMICS drive I/O

(over DRIVE-CLiQ)

• Via Terminal Modules TM15, TM17

High Feature, TM31, TM41, TM54F For connection to

SIMOTION C and P over

SINAMICS S120

! ! ! !

• Via TB30 Terminal Board Plug-in card for

SIMOTION D4x5-2 and

SINAMICS CU320-2

! ! – !

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

SIMOTION Motion Control System

Overview of SIMOTION functions

9/105

Siemens PM 21 · 2013

SIMOTION HMI devices

Connection over PROFIBUS DP

(configured using WinCC flexible) ! – (P320-3)

!(P350-3 DP)

"(P350-3 PN)

! !

• SIMATIC MP 177 DP Mobile Panel

• SIMATIC MP 277 Mobile Panel

• SIMATIC TP 177B and

TP 277 Touch Panel

• SIMATIC OP 177B and

OP 277 Operator Panel

• SIMATIC MP 277 and

MP 377 Multi Panel

• SIMATIC Panel PC 477, PC 677,

PC 877

Connection over Ethernet/PROFINET

(when configured using WinCC

flexible)

! ! ! !

• SIMATIC MP 177 PN Mobile Panel 1)

• SIMATIC MP 277 Mobile Panel 1)

• SIMATIC TP 277 Touch Panel 1)

• SIMATIC TP 177B

Touch Panel Color 1)

• SIMATIC OP 177B

Operator Panel Color 1)

• SIMATIC MP 177

• SIMATIC OP 277 Operator Panel 1)

• SIMATIC MP 277 1) and

MP 377 Multi Panel 1)

• SIMATIC Panel PC 277, PC 477,

PC 577, PC 677, PC 877

HMI software for SIMOTION

• WinCC flexible " " " "

• WinCC (SCADA system,

Version V7.0 and higher) " " " "

Software for extended communication with SIMOTION

• SIMATIC NET OPC server See section SIMOTION

runtime software. " ! 2) " "

• SIMOTION IT OPC XML-DA

(over Ethernet)

- Open communication over TCP/IP

and SOAP standard protocols

- Clients on any hardware with

various operating systems

(Windows, Linux, etc.)

- According to OPC Foundation

standard OPC XML-DA V1.01

! 3) ! 3) ! !

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

1) PROFINET IO-capable.

2) Subject to license.

3) Subject to license for SIMOTION Kernel < V4.2.

SIMOTION Motion Control System

Overview of SIMOTION functions

9/106 Siemens PM 21 · 2013

Software for extended communication with SIMOTION (continued)

• SIMOTION MIIF:

Multipurpose Information Interface

- Symbolic access to SIMOTION

data via Ethernet

- SIMOTION as server, e.g. operator

panels as clients

" " " "

Communication

Ethernet interfaces

• Number and transmission rates 1 ×

10/100 Mbit/s P320-3: 1 ×

10/100/1000

Mbit/s

P350-3: 2 ×

10/100 Mbit/s

1 × 10/100

Mbit/s

D4x5-2 DP: 3

10/100/1000

Mbit/s

D4x5-2

DP/PN: 2 ×

10/100/1000

Mbit/s

PROFIBUS DP interfaces

• On-board/support isochronous

communication One interface can be

used as an MPI.

SIMOTION P350-3:

The PROFIBUS version

can be optionally retro-

fitted with PROFINET.

2/2 P320-3: –/–

P350-3 DP: 2/2

P350-3 PN: –/–

D410-2 DP:

2/2

D410-2

DP/PN:

1/1

2/2

• On-board CP5621 For PG/PC and HMI –P350-3: 1 – –

• Transmission rates in Mbit/s 1.5 / 3 / 6 /12 1.5 / 3 / 6 /12 1.5 / 3 / 6 /12 1.5 / 3 / 6 /12

• Number of PROFIBUS DP slaves Per PROFIBUS DP subnet 64 64 64 64

PROFINET interfaces

• On-board ports SIMOTION P350-3 DP:

PROFINET can be

optionally retrofitted

by means of MCI-PN

Communication Board

C240: –

C240 PN: 3 P320-3: 3

P350-3 DP:

4, "

P350-3 PN: 4

D410-2 DP: –

D410-2

DP/PN: 2

D4x5-2 DP: –

D4x5-2

DP/PN: 3

• Number of PROFINET devices

(provided that PROFINET interface is

onboard or optionally retrofitted)

D4x5-2: CBE30-2 can be

implemented as second

PROFINET interface for

D4x5-2 DP/PN.

Per PROFINET interface

64 64 64 64

• Media redundancy (MRP and MRPD) ! P320-3: !

P350-3: – – !

Further communication interfaces

• Serial interfaces – 1 – –

• USB interfaces D4x5-2:

for upgrading from

D4x5-2 Control Units

using a USB

memory stick

–P320-3:

4 × USB 2.0

P350-3:

4 × USB 2.0

– 2

• DRIVE-CLiQ interfaces ––1D425-2: 4

D435-2: 6

D445-2: 6

D455-2: 6

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

SIMOTION Motion Control System

Overview of SIMOTION functions

9/107

Siemens PM 21 · 2013

Communication (continued)

Connections over PROFIBUS DP

and Ethernet/PROFINET SIMOTION C: PROFINET

with C240 PN only

•PROFIBUS DP The connection resources

can be assigned as

required, over PROFIBUS

DP or Ethernet.

C240: !

C240 PN: !P320-3: –

P350-3 DP: !

P350-3 PN: –

! !

• Ethernet/PROFINET C240: !/–

C240 PN: !/!P320-3: !/!

P350-3 DP:

!/"

P350-3 PN:

!/!

D410-2 DP:

!/–

D410-2

DP/PN: !/!

D4x5-2 DP:

!/–

D4x5-2

DP/PN: !/!

Online connections, max. 16 16 16 16

• SIMOTION SCOUT engineering

system (SCOUT occupies up to

3 online connections)

2 2 2 2

•HMI 5 5 5 5

•OPC ! ! ! !

• Basic communication Xsend /

Xreceive (not via Ethernet) 5 5 5 5

• Standard TCP/IP connections 45 75 45 75

• SIMOTION IT ! ! ! !

Communication functions over

PROFIBUS between: Basic version with regard

to SIMOTION ! ! ! !

• SIMOTION – SIMATIC HMI/

WinCC flexible

- HMI data exchange:

Support from the

SIMOTION operating system

- Plant-wide access to process data

and displays

- Interrupt mechanism:

Alarms are event-driven

• SIMOTION – SIMOTION

- Distributed I/O mechanisms

Process image, e.g. (% I1.3)

I/O variables (symbolic)

- XSND/XRCV, max. 200 bytes

• SIMOTION – SIMATIC S7

- Distributed I/O mechanisms

Process image, e.g. (% I1.3)

I/O variables

- XSND/XRCV, max. 76 bytes

• SIMOTION – SIMATIC NET OPC

• SIMOTION – PG/PCs with STEP 7

and SCOUT

• PROFIBUS DP slave-to-slave

communication

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

SIMOTION Motion Control System

Overview of SIMOTION functions

9/108 Siemens PM 21 · 2013

Communication (continued)

Communication functions over

PROFINET IO between: Basic version with regard

to SIMOTION

• SIMOTION – SIMOTION

- Distributed I/O mechanisms

Process image, e.g. (% I1.3)

I/O variables (symbolic)

PROFINET standard

feature on C240 PN,

P320-3, P350-3 PN,

D410-2 DP/PN and

D4x5-2 DP/PN

! ! ! !

• SIMOTION – SIMATIC S7

- Distributed I/O mechanisms

Process image, e.g. (% I1.3)

I/O variables

- For SIMATIC – SIMOTION:

SIMOTION as I-Device

- For SIMOTION – SIMATIC:

over SIMATIC CP

On P350-3 DP optionally

by means of PROFINET

board.

! ! ! !

• Slave-to-slave

communication between

SIMOTION controllers

! ! ! !

Communication functions over

Ethernet/PROFINET between:

• SIMOTION – SIMATIC HMI/

WinCC flexible

- HMI data exchange:

Support from the

SIMOTION operating system

- Plant-wide access to process data

and displays

- Interrupt mechanism:

Alarms are event-driven

! ! ! !

• SIMOTION – SIMATIC NET OPC ! ! ! !

• SIMOTION IT OPC XML-DA

(over Ethernet)

- Open communication over TCP/IP

and SOAP standard protocols

- Clients on any hardware with

various operating systems

(Windows, Linux, etc.)

- According to OPC

Foundation standard

OPC XML-DA V1.01

! 1) ! 1) ! !

• SIMOTION MIIF:

Multipurpose Information Interface

- Symbolic access to SIMOTION

data via Ethernet

- SIMOTION as server, e.g. operator

panels as clients

OOO O

• SIMOTION – PG/PCs with STEP 7

and SCOUT ! ! ! !

• S7 routing Ethernet/PROFIBUS DP ! ! ! !

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

1) Subject to license for SIMOTION Kernel < V4.2.

SIMOTION Motion Control System

Overview of SIMOTION functions

9/109

Siemens PM 21 · 2013

Communication (continued)

UDP and TCP/IP communication

functions over Ethernet/PROFINET

between:

• SIMOTION – SIMOTION

• SIMOTION – SIMATIC

• SIMOTION – PC

! ! ! !

Serial communication via a

point-to-point connection Basic version with regard

to SIMOTION

• CP 340 and CP 341

communication modules ! ! ! !

• 1SI communication module

(connected over ET 200S) ! ! ! !

Communication via AS-Interface Basic version with regard

to SIMOTION

• CP 343-2 P

communication module ! ! ! !

• DP/AS-Interface Link 20E/

Link Advanced ! ! ! !

• IE/AS-Interface link PN IO ! ! ! !

Connectable network couplers Basic version with regard

to SIMOTION

• DP/DP coupler for connecting

two PROFIBUS DP networks ! ! ! !

• PN/PN coupler for connecting

two PROFINET IO networks ! ! ! !

PROFIsafe drives on SIMOTION

Max. number of PROFIsafe drives

on SIMOTION with SINAMICS S120

drive system:

• via PROFIBUS with PROFIsafe

-with 1 × PROFIBUS interface SIMOTION as I-Slave on

SIMATIC F-CPU over

PROFIBUS

16 P320-3: –

P350-3 DP: 16

P350-3 PN: –

816

-with 2 × PROFIBUS interface 32 P320-3: –

P350-3 DP: 32

P350-3 PN: –

832

• via PROFINET with PROFIsafe SIMOTION as I-Device on

SIMATIC F-CPU over

PROFINET

Configuration:

A higher-level

SIMATIC F-CPU controls

the safety functions of the

SINAMICS S120 drives

that are assigned to

SIMOTION via the I-Slave/

I-Device interface of the

SIMOTION controller.

SIMOTION routes the

safety telegrams through

to the drives.

32 P320-3: 64

P350-3 DP: –

P350-3 PN: 64

D410-2 DP: –

D410-2:

DP/PN: 8

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

SIMOTION Motion Control System

Overview of SIMOTION functions

9/110 Siemens PM 21 · 2013

SIMOTION Kernel

Execution system

• System tasks for motion control

- SERVO (position control cycle)

- IPO (interpolation cycle)

! ! ! !

-SERVO

Fast

-IPO

Fast

SERVOFast and IPOFast

allow axes with differing

dynamic responses to be

assigned to a slow bus

system and a fast bus

system, as well as

especially fast

I/O processing.

High-speed PROFINET

I/O modules are used for

this purpose.

–––D425-2 DP: –

D425-2

DP/PN: –

D435-2 DP: –

D435-2

DP/PN: !

D445-2

DP/PN: !

D455-2

DP/PN: !

- MotionTasks (sequential) 20 32 32 32

- ServoSynchronousTask

(cyclic, synchronous with the

position control cycle)

1111 (2) 1)

• Task structure/program execution

- BackgroundTask (cyclic) Adjustable

monitoring time 1 1 1 1

- TimerInterruptTasks

(time-controlled down to 1 ms) 5 5 5 5

- IPOSynchronousTask

(cyclic, synchronous with the

interpolation cycle)

2222 (3) 1)

- InterruptTasks (for user)

(event-driven) 2 2 2 2

- TControlTasks

(temperature control) 5 5 5 5

- StartupTask

(for transition from STOP to RUN) 1 1 1 1

- ShutdownTask

(for transition from RUN to STOP) 1 1 1 1

• Task structure / error processing

(SystemInterruptTasks) Central troubleshooting

is possible

- ExecutionFaultTask

(starts in the event of an error when

executing a program)

1 1 1 1

- TechnologicalFaultTask

(starts in the event of an error on a

technology object)

1 1 1 1

- PeripheralFaultTask

(starts in the event of an error

on the I/O)

1 1 1 1

- TimeFaultTask

(starts in the event of a

TimerInterruptTask timeout)

1 1 1 1

- TimeFaultBackgroundTask

(starts in the event of a

BackgroundTask timeout)

1 1 1 1

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

1) Values in brackets with SERVOFast and IPOFast activated for D435-2 DP/PN, D445-2 DP/PN and D455-2 DP/PN.

SIMOTION Motion Control System

Overview of SIMOTION functions

9/111

Siemens PM 21 · 2013

SIMOTION Kernel (continued)

Execution system (continued)

• Program organization ! ! ! !

- Units (source program)

-Programs

- Function blocks (FBs)

- Functions (FCs)

- System functions (SFs)

- Libraries

PLC command set

(according to IEC 61131-3; optionally

expandable by technology functions)

! ! ! !

System functions, e.g. for ! ! ! !

• Interrupt and error handling

• Copying data

• Clock functions

• Diagnostic functions

• Module parameterization

• Operating mode transitions,

Run/Stop

• Reading and writing of data blocks

from the user program to an

exchangeable memory medium

• DPV1 communication to DP slaves

• Read/write drive parameters

• DP slaves/PROFINET devices can be

connected to and disconnected from

application

• DP slave and IP address can be set

in user program

• DP station diagnostics

• Activate/deactivate technology

objects

• Counter (IEC commands)

• Timer (IEC commands)

• Real-time clock, format

[DATE_AND_TIME]

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

SIMOTION Motion Control System

Overview of SIMOTION functions

9/112 Siemens PM 21 · 2013

Motion Control technology package

Technology functions

• Motion Control Basic No license required ! ! ! !

• POS – Positioning Use of the functions

during runtime is

subject to license.

SIMOTION D410-2

already contains the

technology functions

for precisely one axis.

(D410-2 no PATH)

! 1) ! 1) ! 1) ! 1)

• GEAR – Synchronous operation ! 1) ! 1) ! 1) ! 1)

•CAM – Cam ! 1) ! 1) ! 1) ! 1)

• PATH – Path interpolation ! 1) ! 1) – ! 1)

The technology package functions are

accessed via language commands,

system variables and through function

blocks in accordance with PLCopen.

Axis types

• Electrical/hydraulic/

stepper motor axes ! ! ! !

• Speed-controlled axis ! ! ! !

• Positioning axes Included with

POS license or higher ! 1) ! 1) ! 1) ! 1)

- Rotary axis

- Linear axis

- Modulo for linear and rotary axes

- Force/pressure-controlled axis

- Force/pressure-limited axis

• Synchronous axis Included with

GEAR license or higher ! 1) ! 1) ! 1) ! 1)

• Path axis Included with

GEAR license or higher ! 1) ! 1) – ! 1)

• Cam axis Included with

CAM license or higher ! 1) ! 1) ! 1) ! 1)

• Virtual axis ! ! ! !

• Simulation axis ! ! ! !

Systems of units

• Metric (mm, m, Nm, Pa, ...) ! ! ! !

• US (inch, feet, PSI, lb, ...) ! ! ! !

Axis monitoring functions

The activated monitoring functions

are executed cyclically. ! ! ! !

• Watchdog

• Hardware and software limit switches

• Position/zero-speed monitoring

• Dynamic following error monitoring

• Encoder monitoring, cable break

• Force/pressure monitoring

•Setpoint

• Plausibility in data exchange

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

1) Use of the functions during runtime is subject to license. Exception: SIMOTION D410-2 already contains the Motion Control technology functions for just

one axis.

SIMOTION Motion Control System

Overview of SIMOTION functions

9/113

Siemens PM 21 · 2013

Other technology packages

TControl technology package Technology package

integrated in SCOUT ! 1) ! 1) ! 1) ! 1)

• With technology functions for

temperature control

Technology package

Drive Control Chart (DCC) Technology package

integrated in SCOUT ! ! ! !

• With technology functions for

Drive Control Chart

Technology package

Multipurpose Information Interface

(MIIF)

Technology package

can be purchased

via your Siemens

contact

" 1) " 1) " 1) " 1)

• With multi-functional

communication functions

SIMOTION IT

SIMOTION IT DIAG

Integrated web server on the

SIMOTION controller

! 2) ! 2) ! !

• Service and diagnostic functions

provided via Internet browser with

extensive information functions

(hardware/software version display,

process utilization, memory usage,

diagnostic buffer, task runtimes, user

logbook, operating state, time of day,

etc.)

• Access to all variables on the control

system using variable browser

functions

• Watch tables

(control variable diagnostics in status

and control tables that can be

permanently saved)

•Trace

(control variable tracing for one

controller or several synchronously)

• Generation of diagnostic data

(diagnostic buffer, alarms, states of

variables, ...)

• Project update

• Firmware update

• Password-protected access

• Remote access to SIMOTION file

system

• User-defined service and diagnostic

pages

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

1) Use of the functions during runtime is subject to license.

2) Subject to license for SIMOTION Kernel < V4.2.

SIMOTION Motion Control System

Overview of SIMOTION functions

9/114 Siemens PM 21 · 2013

SIMOTION IT (continued)

SIMOTION IT OPC XML-DA

Integrated OPC XML-DA server on the

SIMOTION controller

! 1) ! 1) ! !

• Read/write variables

• Browse variables

• Trace interface via SOAP

• Password-protected access

SIMOTION IT Virtual Machine

(integrated Java runtime environment

on the SIMOTION controller)

• Read and write access to the

SIMOTION variables

• Read and write access to the non-

volatile memory (NVRAM)

• Use of system functions

(functions of the technology objects)

• Use of standard Java classes in the

device (file access, network func-

tions, string functions, etc.)

• Creation of servlets, for the purpose

of enhancing the display of menu

interfaces in HTML pages

Licensing through

SIMOTION IT Virtual

Machine

Note:

For SIMOTION Kernel

< V4.2, can be used as

combined license for

SIMOTION IT DIAG,

OPC XML-DA and

Virtual Machine.

! ! ! !

SIMOTION SCOUT engineering system

SIMOTION SCOUT basic functions ! ! ! !

• SCOUT Workbench

•STARTER

Drive commissioning/parameterization

• Hardware and network configuration

• Diagnostics for testing and

commissioning

• Axis control panel

• Program editors/programming

languages (command set in

accordance with IEC 61131-3)

- Structured Text (ST)

- Ladder Logic (LAD)

- Function Block Diagram (FBD)

- Motion Control Chart (MCC)

• Creation of cams (basic)

• Creation of technology objects

• Technology tools

(function generator)

• Operator interface, online help and

documentation in English, French,

German and Italian

SIMOTION SCOUT optional

packages

• CamTool

(graphical cam editor) " " " "

• DCC editor

(graphical editor for

Drive Control Chart)

" " " "

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

1) Subject to license for SIMOTION Kernel < V4.2.

SIMOTION Motion Control System

Overview of SIMOTION functions

9/115

Siemens PM 21 · 2013

Testing and diagnostics with SIMOTION SCOUT

Information functions ! ! ! !

• Hardware/software version

• Processor utilization

• Memory utilization

• Diagnostic buffer

• Task runtimes

•User logbook

• Operating status

•Time

Comparison functions for projects ! ! ! !

• Comparison of objects in projects:

- between offline projects

- between online and offline projects

• Detailed comparison: Shows

differences between objects in detail

• Matching: Projects and objects

can be merged

Program test functions ! ! ! !

• Control/status variables

• Watch tables

• Status program/FB/FC

(with specification of the call point)

• Single-step MCC

• Breakpoints in all languages

(ST, MCC, LAD/FBD)

• Tracer for MCC

(for fast program sequences)

• Trace technology object

(recording of all technology

object commands)

Trace ! ! ! !

• Recording of I/O, system and

program variables (on one controller

as well as over several synchro-

nously)

• Recording from position control cycle

onwards (n × position control cycle)

• Trigger:

Instantaneous, rising/falling edge,

at code point system variable

• Measuring functions for optimizing

the speed/position controller (step

response, ramp, frequency curve)

• Automatic setting of the speed

controller/position controller

• Bode diagram, FFT analysis, function

generator, mathematical functions

• Endless trace

• Recording over defined measuring

period

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

SIMOTION Motion Control System

Overview of SIMOTION functions

9/116 Siemens PM 21 · 2013

Testing and diagnostics with SIMOTION SCOUT (continued)

Further diagnostic functions

• Module diagnostics ! ! ! !

- Centralized

- Distributed (e.g. ET 200M)

• PROFIBUS DP station diagnostics PROFINET standard

feature on C240 PN,

P320-3, P350-3 PN,

D410-2 DP/PN and

D4x5-2 DP/PN.

Optional on P350-3 DP by

means of PROFINET

board.

! ! ! !

• PROFINET station diagnostics ! ! ! !

• Diagnostic buffer On SIMOTION D, one

diagnostic buffer is

provided for SIMOTION

and another for the inte-

grated SINAMICS drive.

- No. of entries, max. 200 200 2 × 100 2 × 200

• Process fault diagnostics (Alarm_S)

- Messages from user program ! ! ! !

- No. of entries, max. 40 40 40 40

Engineering drives

STARTER (integrated in SCOUT)

Drive/commissioning software for: ! ! ! !

• SINAMICS S / SINAMICS G

• MICROMASTER 410/420/430/440

Drive ES BASIC

Engineering tools and integrated data

storage in SIMATIC S7/SIMOTION

projects for:

Drive ES BASIC is

included complete with

license in the

SIMOTION SCOUT

software package.

! ! ! !

• SINAMICS S/SINAMICS G

(STARTER)

• MICROMASTER 410/420/430/440

(STARTER)

•SIMODRIVE

(SimoCom U/SimoCom A)

!Basic version

(function or license is purchased

with the device or SCOUT)

"Option

(must be acquired as

software/hardware)

– Not possible

Notes SIMOTION

C240/C240 PN SIMOTION

P320-3/P350-3 SIMOTION

D410-2 SIMOTION

D4x5-2

Siemens PM 21 · 2013

10/2 Overview

10/3 Compact I/O modules

10/3 SIMOTION TMC

10/9 Power supplies

10/9 Power supplies for

SIMOTION C / SIMATIC ET 200M

10/10 Universal SITOP power supplies

10/11 Uninterruptible SITOP power supplies

with battery module

10/12 Uninterruptible SITOP power supplies

with capacitor module

10/13 SIMATIC S7-300 I/O

10/14 Digital Modules

10/15 Analog Modules

10/16 FM 350-1 Counter Module

10/16 FM 350-2 Counter Module

10/17 FM 352 Electronic cam controller

10/17 FM 352-5 High-speed Boolean processor

10/18 CP 340 Communication Module

10/18 CP 341 Communication Module

10/19 SM 374 Simulator Module

10/19 DM 370 Dummy Module

10/20 Accessories and spare parts

10/21 Distributed I/O

10/23 SIMATIC ET 200M

10/24 SIMATIC ET 200S

10/35 SIMATIC ET 200eco

10/36 SIMATIC ET 200eco PN

10/37 SIMATIC ET 200pro

10/38 SINUMERIK Analog Drive Interface

for 4 Axes ADI 4

SIMATIC Interface Module IM 174

10/40 AS-Interface

10/44 SINAMICS drive I/O

10/47 TM15 and TM17 High Feature

Terminal Modules

10/50 Other I/O modules

10/50 SIPLUS extreme

10/50 SIMATIC RFID systems

10/51 SIMATIC Machine Vision

10/51 SIWAREX Weighing systems

10/52 Other I/O modules /

Notes on use

10/52 Function blocks for I/O modules

SIMOTION

I/O components

SIMOTION I/O components

Overview

10/2 Siemens PM 21 · 2013

Designation Description Page

Compact I/O 10/3

SIMOTION TMC SIMOTION TMC – compact I/O modules with high channel

densities, designed for SINAMICS S120 booksize compact 10/3

Power supplies 10/9

Power supplies for

SIMOTION C/SIMATIC ET 200M Power supplies for snapping onto the SIMATIC S7-300

mouting rail 10/9

Universal SITOP power supplies Power supplies for snapping onto 35 mm (1.38 in) standard rails

(EN 50022) 10/10

Uninterruptible SITOP power supplies

with battery module Power supplies for completely bridging power failures or

fluctuations 10/11

Uninterruptible SITOP power supply

with capacitor module 10/12

SIMATIC S7-300 I/O 10/13

Digital Modules For the connection of digital sensors and actuators 10/14

Analog Modules For the connection of analog sensors and actuators 10/15

FM 350-1, FM 350-2 Counter Modules For simple and universal counting and measuring tasks 10/16

FM 352 Cam controller High-speed, electronic cam controller 10/17

FM 352-5 High Speed Boolean Processor For applications with an extremely short response time 10/17

CP 340, CP 341 Communication Modules For a point-to-point connection 10/18

SM 374 Simulator Module For program testing during commissioning and operation 10/19

DM 370 Dummy Module For reserving slots for unconfigured Signal Modules 10/19

Accessories 10/20

Distributed I/O 10/21

SIMATIC ET 200SP Extremely flexible and modular distributed I/O system 10/22

SIMATIC ET 200M With high channel densities 10/23

SIMATIC ET 200S Multi-talent with comprehensive function range 10/24

SIMATIC ET 200eco Digital block I/O 10/35

SIMATIC ET 200eco PN Digital block I/O with PROFINET connection 10/36

SIMATIC ET 200pro Modular and multi-functional 10/37

SINUMERIK Analog Drive Interface

for 4 Axes ADI 4 For the connection of drives with analog ±10 V interface

and stepper drives 10/38

SIMATIC Interface Module IM 174 For the connection of drives with analog ±10 V interface

and stepper drives 10/38

AS-Interface Modules and accessories for gateway to AS-Interface 10/40

SINAMICS drive I/O 10/44

TM15 and TM17 High Feature Terminal Modules For digital inputs and outputs with short signal delay times 10/47

Other I/O modules 10/50

SIPLUS extreme For extremely harsh industrial environmental conditions 10/50

SIMATIC RFID systems For controlling and optimizing the material flow and logistics 10/50

SIMATIC Machine Vision For the visual inspection and recognition of products 10/51

SIWAREX Weighing systems For weighing and filling systems 10/51

Other I/O modules/Notes on use For the connection of standard components 10/52

Function blocks for I/O modules For the transfer into the application program 10/52

SIMOTION I/O components

Compact I/O modules

10/3

Siemens PM 21 · 2013

SIMOTION TMC

■

Overview

Left: SIMOTION TMC1080 PN

Right: SIMOTION TMC2040 PN

SIMOTION TMC are compact I/O modules with high channel

densities designed for SINAMICS S120 Booksize Compact.

The modules have two PROFINET IO connections with real-time

functionality (IRT) for connecting to the SIMOTION controller or

for networking with other PROFINET components.

The performance of the digital inputs and outputs whose func-

tions can be parameterized has been optimized for Motion

Control applications – with regard to a strict real-time response,

shortest possible signal runtimes and the most stringent require-

ments for reproducibility of signal acquisition and signal output.

SIMOTION TMC compact I/O is available in two function variants and two wiring variants:

✓Available

– Not available

Features

The function variant TMC1x80 PN has 80 channels with

• 32 digital inputs,

• 32 digital inputs/outputs and

• 16 digital outputs.

The function variant TMC2x40 PN 1) has 40 channels with

• 16 high speed digital inputs/outputs with technology

(Output Cam, Measuring Input) and push-pull drivers,

• 16 digital inputs/outputs with technology

(Output Cam, Measuring Input) and

• 8 digital inputs/outputs.

16 outputs of the TMC2x40 have special push-pull output

drivers. The push-pull technology ensures that extremely steep

input and output edges are achieved. This offers the advantages

of extremely short OFF delay times and maximum repeat accu-

racy. This is particularly useful when signals have to be switched

position-specifically with a high degree of accuracy, e.g. for

accurate positioning of a drop of glue when the web of material

is passing through at high speed.

The push-pull technology ensures that especially short terminal-

to-terminal response times are achieved.

■

Benefits

The compact digital I/O SIMOTION TMC is a perfectly integrated

part of the high-performance control and drive concept of

SIMOTION/SINAMICS thanks to its format, high density of

channels and excellent performance.

7The high channel density saves space in the control cabinet

7Easy configuration and integration due to connection over

PROFINET IO

7Optimized for Motion Control applications with SIMOTION and

SINAMICS

7High performance and high precision

7I/O functionality parameterizable per channel

7Flexible wiring through wiring variants

7Adjustable input filters for particularly short delay times or

maximum suppression of noise pulses

TMC1080 PN TMC1180 PN TMC2040 PN 1) TMC2140 PN 1)

Number of I/Os 80 80 40 40

DI, DO ✓ ✓ ✓ ✓

High speed DI, DO – – ✓ (16) ✓ (16)

Technology Measuring Input, Output Cam 2) – – ✓ ✓

Module width 75 mm (2.95 in) 75 mm (2.95 in) 50 mm (1.97 in) 50 mm (1.97 in)

I/O wired to the module directly via terminal blocks ✓–✓–

I/O wired indirectly through wiring modules –✓–✓

1) Available soon. 2) Only in combination with the SIMOTION Motion Control system .

SIMOTION I/O components

Compact I/O modules

10/4 Siemens PM 21 · 2013

SIMOTION TMC

■

Application

SIMOTION TMC is predestined for applications in which a high

channel density of digital inputs/outputs is required in accor-

dance with the SINAMICS S120 Booksize Compact format.

With the TMC2x40 PN technology module, applications can also

be implemented that require fast and highly accurate acquisition

or output of signals.

Examples for precise sensing of signals:

•Edge detection

• Quality monitoring (e.g. product is good/bad)

• Product tracing (e.g. product is available/not available)

• Print-mark detection

• Tool monitoring (e.g. presses)

• Machine status monitoring (e.g. plastic injection molding

machines)

• Weft thread break monitoring (e.g. textile machines)

Examples for precise output of signals:

• Position-dependent switching of actuators

- Camera trigger signal (quality assurance)

- Control of an air nozzle for blowing away cut-offs

- Controlling nozzles for applying glue

• Product extraction from production line

• Implementation of line Motion Control systems

■

Design

In addition to the 2 function variants TMC1x80/2x40 PN, the

modules are also available in 2 wiring variants – so there are

4 variants in total.

I/O wired directly to TMC

With TMC1080 PN and TMC2040 PN, the I/O is wired up to the

module directly at terminal blocks. The terminal blocks are avail-

able in 3 designs:

• 10-pole screw-type connection without LEDs

• 10-pole push-in with 9 LEDs

• 30-pole push-in with 9 LEDs

The 30-pole terminal block supports wiring in a 3-wire system,

i.e. one ground and one 24 V terminal are available for each

DI or DO.

The LEDs of the terminal blocks indicate channel status as well

as the presence of the load current supply.

Indirectly wired I/O

With TMC1180 PN and TMC2140 PN, the I/O is wired through

separate wiring modules. The wiring modules, connecting

cables and the 10-pole connector for the load current supply

must be ordered separately.

Strain relief/shield support

The 24 V connector for the module power supply as well as the

strain relief for the PROFINET connectors are included in the

scope of supply of the TMC modules.

The strain relief/shield support for the I/O wiring is available as

an optional accessory and is required in the following cases:

• When digital inputs are operated with short filter times, a

shield support is required.

• Strain relief is necessary due to the local conditions.

Alternatively, the shield may also be attached to a shield busbar

in the control cabinet.

G_PM10_EN_00220

with LEDs

10-pole

push-in

without LEDs

10-pole

screw-type connection

with LEDs

30-pole

push-in

5 connectors

10 connectors

TMC2040 PNTMC1080 PN

G_PM10_EN_00221

50-pole

with LEDs

10-pole push-in

without LEDs

for the load current supply

of the I/O channels:

10-pole screw-type connection

TMC2140 PN

TMC1180 PN

G_PM10_EN_00222

Strain relief/shield support for

the I/O cable (accessory, must

be ordered separately)

Connector 24 V for module power

supply (included in the scope of

supply of the TMC modules)

Strain relief for the PROFINET

connector (included in the scope

of supply of the TMC modules)

SIMOTION I/O components

Compact I/O modules

10/5

Siemens PM 21 · 2013

SIMOTION TMC

■

Function

Functionality of the digital inputs/outputs

The TMC compact I/O is configured using the

SIMOTION SCOUT engineering system. The digital inputs/

outputs are galvanically isolated in groups of 8. The functionality

of each I/O channel can be individually parameterized and

therefore optimized to the specific requirements.

• The DI/DO channels of TMC1x80 PN can be parameterized as

DI or DO as required.

• With TMC2x40 PN:

- 8 DI/DO channels can be parameterized as DI or DO as

required,

- 32 DI/DO channels can be parameterized as DI, DO,

measuring input or output cam as required and

- channels can be parameterized as enable inputs.

• Adjustable filter time for digital inputs (from 1 µs to 3.2 ms in

steps of 5)

• Adjustable substitute value response for digital outputs

• Signals can be inverted

Parameterized enable inputs can enable measuring inputs and

output cams (gate function).

For measuring inputs and output cams, TMC2x40 PN supports

up to 2 edges of each servo/interpolator cycle of the SIMOTION

controller.

The measuring input and cam functionality is supported by the

SIMOTION technology objects Measuring Input, Cam and Cam

Track.

Status indications

The status of the TMC compact I/O is indicated via four two-color

LEDs on the module front.

• SF, group fault

• BF, bus fault

• SY/MT status "SY" (SYNC) and "MT" (maintenance)

• ON – Power on

The LINK and ACTIVITY status are also signaled on the two

PROFINET ports.

On TMC1080 PN and TMC2040 PN, the channel status and the

presence of the load current supply are indicated via green

LEDs on the terminal block, depending on the terminal block

used.

■

Technical specifications

TMC1x80 PN TMC2x40 PN 1)

PROFINET interface

Number of ports 2 2

Functionality

•Note PROFINET IO with IRT and RT PROFINET IO with IRT and RT

IRT is required for Output Cam/Measuring Input

Minimum PROFINET transmission cycle µs 250 250

Module power supply

DC supply voltage

• Nominal value V24 24

• Permitted range V 20.4 ... 28.8 20.4 ... 28.8

Current consumption, typ. A0.1 0.2

•Note Without digital inputs/outputs Without digital inputs/outputs

Power loss, max. W 3 5

I/O

Quantity structure 32 DI,

32 DI/DO,

16 DO

16 high speed DI/DO with technology and

push-pull drivers,

16 DI/DO with technology,

8 DI/DO

•Note DI/DO parameterizable as DI or DO 8 DI/DO parameterizable as DI or DO;

32 DI/DO parameterizable as DI, DO,

measuring input or output cam

Isolation Yes Yes

•Note In groups of 8 In groups of 8

Max. cable length m (ft) 30 (98.4) 30 (98.4)

1) Technical data subject to change without notice.

For up-to-date information, see Industry Mall.

SIMOTION I/O components

Compact I/O modules

10/6 Siemens PM 21 · 2013

SIMOTION TMC

■

Technical specifications (continued)

TMC1x80 PN TMC2x40 PN 1)

Digital inputs

DC load voltage supply

• Nominal value V24 24

• Permitted range V20.4 ... 28.8 20.4 ... 28.8

Current consumption at 24 V DC

•DI mA 15 15

• High speed DI mA – 0

•Note Current consumption from load supply

per group Current consumption from load supply

per group

DC input voltage at digital input

• Permitted range V-3 ... 30 -3 ... 30

• For "0" signal V-3 ... 5 -3 ... 5

• For "1" signal V15 ... 30 15 ... 30

•Note An unconnected digital input is

interpreted as "Low" An unconnected digital input is

interpreted as "Low"

Current consumption per channel

•DI mA 2.5 2.5

• High speed DI mA –5.3

•Note IEC 61131-2 Type 1 IEC 61131-2 Type 1

Input impedance

•DI kΩ8.8 8.8

• High speed DI kΩ–4.5

Input delay time, typ.

•DI µs 15 15

• High speed DI µs – 1

Input delay time, max.

•DI µs 20 20

• High speed DI µs – 1

Adjustable filter times 1 µs/0.1 ms/0.4 ms/1.6 ms/3.2 ms 1 µs/0.1 ms/0.4 ms/1.6 ms/3.2 ms

Measuring input, resolution µs – 1

Reproducibility of signal acquisition

•DI µs 15 15

• High speed DI µs – 1

•Note Data is based on filter time of 1 µs Data is based on filter time of 1 µs

Digital outputs

DC load current supply

• Nominal value V24 24

• Permitted range V20.4 ... 28.8 20.4 ... 28.8

Load current per channel A0.5 0.5

Lamp load, max. W 5 2

Extinguishing power, max.

•DO J0.5 0.5

• High speed DO (push-pull) J – 0.2

• Note Per channel, one-off pulse Per channel, one-off pulse

Output delay time

• Signal "0" -> "1", max. µs 120 120

• Signal "1" -> "0", max. µs 170 170

•Note Resistive load, RL = 47 Ω Resistive load, RL = 47 Ω

Output delay time

(high speed DO, push-pull)

• Signal "0" -> "1", max. µs – 1

• Signal "1" -> "0", max. µs – 1

•Note – Resistive load, RL = 47 Ω

Output cam, resolution µs – 1

Reproducibility of signal output

•DO µs 40 40

• High speed DO (push-pull) µs – 1

1) Technical data subject to change without notice.

For up-to-date information, see Industry Mall.

SIMOTION I/O components

Compact I/O modules

10/7

Siemens PM 21 · 2013

SIMOTION TMC

■

Technical specifications (continued)

TMC1x80 PN TMC2x40 PN 1)

Digital outputs (continued)

Switching frequency, max.

• Resistive load kHz 2 2

• Inductive load kHz 0.002 0.002

Switching frequency, max.

(high speed DO, push-pull)

• Resistive load kHz –64

• Inductive load kHz –0.002

Leakage current in switched off state, max. µA 50 50

•Note Per channel Per channel

Voltage drop at output

•DO V0.7 0.7

• High speed DO (push-pull) V – 0.6

•Note Load current supply to output Load current supply to output

Total current of outputs, max.

• Up to 40 °C (104 °F) A 4 4

• Up to 55 °C (131° F) (derating) A 2 2

•Note Current per group of 8 Current per group of 8

Outputs protected against continuous

short-circuit, overload and reverse-polarity V36 36

Other technical specifications

Ambient temperature up to an altitude

of 2000 m

• Without derating °C (°F) 0 ... +40 (+32 ... +104) 0 ... +40 (+32 ... +104)

• With derating °C (°F) 0 ... +55 (+32 ... +131) 0 ... +55 (+32 ... +131)

Storage Temperature °C (°F) -40 ... +85 (-40 ... +185) -40 ... +85 (-40 ... +185)

Relative humidity %5 ... 95 5 ... 95

•Note No condensation No condensation

Degree of protection IP 20 IP 20

Weight kg (lb) 1.5 (3.31) 1.3 (2.86)

Height mm (in) 286 (11.26) 286 (11.26)

Width mm (in) 75 (2.95) 50 (1.97)

Depth mm (in) 165 (6.50) 165 (6.50)

•Note Dimensions without connector,

strain relief/shield support Dimensions without connector,

strain relief/shield support

Approvals

USA UL 508c UL 508c

Canada – –

1) Technical data subject to change without notice.

For up-to-date information, see Industry Mall.

SIMOTION I/O components

Compact I/O modules

10/8 Siemens PM 21 · 2013

SIMOTION TMC

■

Selection and ordering data

■

Accessories

Note on connector sets

Two connector sets (2 × 5 connectors) are required for

TMC1080 PN. One connector set is sufficient for TMC2040 PN.

Connectors from the different sets can be used together on the

same module (e.g. when only a subset of the I/O channels is

required in a 3-wire system).

Two 10-pole terminal blocks are required for the load current

supply of the digital inputs and outputs with TMC1180 PN and

one 10-pole terminal block is required withTMC2140.

Note on wiring modules

With TMC1180 PN, two wiring modules and two connecting

cables are required. One wiring module and one connecting

cable are sufficient for TMC2140 PN.

One (TMC2140 PN) or two (TMC1180 PN) 10-pole terminal

blocks are also required alternatively with or without LEDs for

load current supply of the I/O channels.

■

More information

You will find information about integrating TMC compact I/O into

automation solutions that do not use SIMOTION controllers on

the Internet at:

http://support.automation.siemens.com/WW/view/en/59886631

Description Order No.

TMC1080 PN

Compact I/O designed in

SINAMICS S120 Booksize Compact

format, for PROFINET IO,

for direct wiring to terminal blocks,

32 DI, 32 DI/DO, 16 DO

Requires SIMOTION SCOUT V4.3 SP1

HF3

6AU1101-0AB00-0AA0

TMC1180 PN

Compact I/O designed in

SINAMICS S120 Booksize Compact

format, for PROFINET IO,

for indirect wiring through wiring

modules, 32 DI, 32 DI/DO, 16 DO

Requires SIMOTION SCOUT V4.3 SP1

HF3

6AU1101-1AB00-0AA0

TMC2040 PN

Compact I/O designed in

SINAMICS S120 Booksize Compact

format, for PROFINET IO,

for direct wiring to terminal blocks,

16 high speed DI/DO with technology

drivers and push-pull drivers,

16 DI/DO with technology, 8 DI/DO

Requires SIMOTION SCOUT V4.3.x 1)

6AU1102-0AB00-0AA0 2)

TMC2140 PN

Compact I/O designed in

SINAMICS S120 Booksize Compact

format, for PROFINET IO,

for indirect wiring through wiring

modules, 16 high speed DI/DO with

technology drivers and push-pull drivers,

16 DI/DO with technology, 8 DI/DO

Requires SIMOTION SCOUT V4.3.x 1)

6AU1102-1AB00-0AA0 2)

Description Order No.

Accessories for TMC1x80 PN and TMC2x40 PN

Connector set, screw-type

1-wire system, without LEDs

5 terminal blocks (10-pole)

6AU1100-0AA00-0AA0

Connector set, push-in

1-wire system, with LEDs

5 terminal blocks (10-pole)

6AU1100-0AB00-0AA0

Connector set, push-in

3-wire system, with LEDs

5 terminal blocks (30-pole)

6AU1100-0AC00-0AA0

Strain relief/shield support

For I/O cable, for commercially available

clamps up to 12 mm (0.47 in)

6AU1100-1AB00-0AA0

Accessories for PROFINET

RJ45 FastConnect connector

for Industrial Ethernet/PROFINET

180° cable outlet

• 1 pack = 1 unit 6GK1901-1BB10-2AA0

• 1 pack = 10 units 6GK1901-1BB10-2AB0

• 1 pack = 50 units 6GK1901-1BB10-2AE0

Accessories for PROFINET (continued)

FastConnect cables for

Industrial Ethernet/PROFINET 3)

• IE FC Standard Cable GP 2x2 6XV1840-2AH10

• IE FC Flexible Cable GP 2x2 6XV1870-2B

• IE FC Trailing Cable GP 2x2 6XV1870-2D

• IE FC Trailing Cable 2x2 6XV1840-3AH10

• IE FC Marine Cable 2x2 6XV1840-4AH10

Stripping tool for Industrial Ethernet/

PROFINET FastConnect cables

IE FC stripping tool

6GK1901-1GA00

Description Type/Item No.

Available from:

Phoenix Contact

https://catalog.

phoenixcontact.net

Accessories for SIMOTION TMC1180 PN and TMC2140 PN

Wiring module

50-pole without LEDs

(VARIOFACE module with tension

clamp spring connection)

Type: UM 45-FLK50/ZFKDS

Item No.: 293585

Wiring module

50-pole with LEDs

(VARIOFACE module with screw-type

connection)

Type: VIP-3/SC/FLK50/LED

Item No.: 2322113

Connecting cable

For connecting the separate wiring

modules to the TMC compact I/O

(pre-assembled round cable with two

50-pole spring-loaded terminal strips)

Type: FLK50/EZ-

DR/100/KONFEK/S

(example for 1 m (3.28 ft)

cable length)

Connecting cable

For connecting the separate wiring

modules to the TMC compact I/O

(pre-assembled round cable with two

overmolded 50-pole spring-loaded

terminal strips)

Type: VIP-CAB-

FLK50/0.14/3.0M

(example for 3 m (9.84 ft)

cable length)

Description Order No.

1) For the applicable SCOUT version, see the delivery release announce-

ment at:

http://support.automation.siemens.com/WW/view/en/10805436/133400

2) Available soon.

3) Sold by the meter. Max. delivery unit 1000 m (3281 ft), minimum order

quantity 20 m (65.62 ft).

SIMOTION I/O components

Power supplies

10/9

Siemens PM 21 · 2013

Power supplies for

SIMOTION C / SIMATIC ET 200M

■

Overview

PS307 power supply, 5 A

The PS305/PS307 power supplies convert the line voltage

(120 V/230 V AC, 24 V to 110 V DC) into the 24 V DC operating

voltage and are directly snapped onto the SIMATIC S7-300

mounting rail.

The following versions are available for the output currents:

•2A

•5A

•10A

The required summation current should be taken into account

when sizing in the power supply (e.g. current draw of

SIMOTION C, supply for the digital outputs).

■

Application

Controlled 24 V DC power supply for:

•SIMOTIONC

• Distributed I/O (e.g. SIMATIC ET 200M)

•Sensors

• Actuators

■

Design

The power supplies are snapped onto the SIMATIC S7-300

mounting rail to the left of the SIMOTION C Motion Controller or

SIMATIC ET 200M interface (IM 153).

The front of the module contains:

• An LED

(signals that the 24 V DC output voltage is ON)

• Supply voltage selector switch with protective cap

for selecting the input voltage of 120 V AC or 230 V AC

• ON/OFF switch for 24 V DC output voltage

• Terminals

for input voltage, output voltage and ground, covered by the

front door

The power supplies can also be mounted onto a 35 mm DIN rail

(EN 50022). Mounting adapters are required for this purpose:

• 1 adapter for PS307, 24 V DC/2 A, 24 V DC/5 A

• 2 adapters for PS307, 24 V DC/10 A

■

Selection and ordering data

■

More information

For further information, see Catalog ST 70 and the Industry Mall

under Automation technology/Automation systems/

SIMATIC Industrial automation systems/Controllers/

SIMATIC S7 modular controllers/S7-300/S7-300F/

Power supplies.

Description Order No.

SIMATIC S7-300, controlled power

supply, 1-phase

• 120/230 V AC; 24 V DC/2 A 6ES7307-1BA01-0AA0

• 24 V ... 110 V DC; 24 V DC/2 A

(extended temperature range) 6ES7305-1BA80-0AA0

• 120/230 V AC; 24 V DC/5 A 6ES7307-1EA01-0AA0

• 120/230 V AC; 24 V DC/5 A

(extended temperature range) 6ES7307-1EA80-0AA0

• 120/230 V AC; 24 V DC/10 A 6ES7307-1KA02-0AA0

Mounting adapter

for snapping the PS307 onto 35 mm

(1.38 in) standard rails (EN 50022)

6ES7390-6BA00-0AA0

SIMOTION I/O components

Power supplies

10/10 Siemens PM 21 · 2013

Universal SITOP power supplies

■

Overview

Power supplies (one, two or three-phase)

The controlled SITOP power supplies are snapped onto a 35 mm

(1.38 in) standard mounting rail (EN 50022). They cannot be

snapped onto the SIMATIC S7-300 mounting rail.

SITOP modular

The SITOP modular power supply comprises of standard

devices with 5 A, 10 A, 20 A and 40 A options which can be

expanded with additional modules. The modularity offers

advantages with respect to flexibility and simple handling. The

wide-range input, Class B radio interference category according

to EN 55022 and limitation of input current harmonics to

EN 61000-3-2 make these power supplies suitable for use in

many different application areas.

Basic units/features

• 5 A and 10 A basic units

with 120/230 to 500 V AC wide-range input for operation on

1-phase network as well as 2-phase operation on 3-phase

network (connection to two phases of a 3-phase supply

network)

• 20 A and 40 A basic units

with 120/230 V AC input voltage for 1-phase operation or with

400 to 500 V 3 AC wide-range input for 3-phase operation

• Extremely small width of the 3-phase 20 A basic unit

(70 mm (2.76 in) wide)

• Selectable "constant current" or "stored tripping" short-circuit

behavior

• 3 LEDs for signaling "24 V OK", "Overload" and "Stored

tripping"

• Adjustable output voltage up to 28.8 V to compensate for

voltage drops

• Power boost supports up to three times the rated current

Supplementary modules for function expansions

Buffer module for extending the network failure buffering time

to 100 ms for 40 A load currents and up to 800 ms for 5 A load

currents

Signaling module for providing signals about the operating

status of the power supply ("DC Voltage OK", "Ready") as well as

for remote activation/deactivation of the power supply

Redundancy module for decoupling two power supplies during

parallel operation (continued)

SITOP select diagnostics module

The SITOP select diagnostics module is used for dividing the

load current into four current paths for monitoring the individual

subcurrents.

SITOP smart

The 1-phase power supply for universal applications with a

narrow construction; 150 % extra power and 120 % rated power

up to 45 °C (113 °F). Without limitation of the line harmonics

according to EN 61000-3-2 with the industrial version

(-2AA01 types).

SITOP power in flat design

SITOP power in flat design is preferred where only small mount-

ing depths are available, for example, when distributed I/O is

used, in machines or recesses.

■

Selection and ordering data

■

More information

For further information, see Catalog KT 10.1 and the Industry

Mall under Automation technology/Power supplies/

SITOP Power Supplies.

Description Order No.

SITOP modular power supply

• 1-phase/2-phase

- 120/230 ... 500 V AC; 24 V DC/5 A 6EP1333-3BA00

- 120/230 ... 500 V AC; 24 V DC/10 A 6EP1334-3BA00

- 120/230 V AC; 24 V DC/20 A 6EP1336-3BA00

- 120/230 V AC; 24 V DC/40 A 6EP1337-3BA00

• 3-phase

- 400 ... 500 V AC; 24 V DC/20 A 6EP1436-3BA10

- 400 ... 500 V AC; 24 V DC/40 A 6EP1437-3BA00

Add-on modules for SITOP modular

•Buffer module 6EP1961-3BA01

• Signaling module 6EP1961-3BA10

• Redundancy module 6EP1961-3BA21

SITOP select diagnostics module,

4 channels 6EP1961-2BA00

SITOP smart power supply, 1-phase

• 120/230 V AC; 24 V DC/2.5 A 6EP1332-2BA10

• 120/230 V AC; 24 V DC/5 A 6EP1333-2BA01

• 120/230 V AC; 24 V DC/5 A

(industrial version) 6EP1333-2AA01

• 120/230 V AC; 24 V DC/10 A 6EP1334-2BA01

• 120/230 V AC; 24 V DC/10 A

(industrial version) 6EP1334-2AA01

Power supply SITOP power, slimline

design, 1-phase

• 120/230 V AC; 24 V DC/5 A 6EP1333-1AL12

• 120/230 V AC; 24 V DC/10 A 6EP1334-1AL12

SIMOTION I/O components

Power supplies

10/11

Siemens PM 21 · 2013

Uninterruptible SITOP power supplies

with battery module

■

Overview

DC UPS module with battery module

By combining a DC UPS module with at least one 24 V battery

module and one SITOP power supply, longer power failures can

be completely bridged.

This combination can be used e.g. in

• mechanical engineering

• textile industry

• all types of production lines and filling systems

This prevents the negative effects which often result due to

power failures.

Siemens offers the uninterruptible power supplies DC UPS 6 A,

DC UPS 15 A and DC UPS 40 A as well as the battery modules

1.2 Ah, 2.5 Ah, 3.2 Ah, 7 Ah and 12 Ah for "NONSTOP" applica-

tions.

■

Benefits

DC UPS modules for complete uninterruptible bridging of power

failures including exhaustive discharge protection, battery life

time monitoring and ON/OFF control current circuit.

724 V DC input voltage

(supply through SITOP power supply from 5 A rated current)

7Rated output power 144 W (DC UPS 6 A) and 360 W

(DC UPS 15 A)

7Rated output power 480 W or 960 W (DC UPS 40 A with

one or two battery modules)

7High efficiency of approx. 95 to 97 %

7Power ON threshold adjustable through DIP switch between

22 V and 25.5 V

7Bridging time adjustable with DIP switch in the range between

5 and 635 s or until switched off automatically due to complete

discharge

7Option: Signals can be output via serial interface or USB

interface, automatic reset of industrial PCs supported through

selectable shut-down behavior

■

Function

The rechargeable battery is connected to the system as soon as

the load voltage or the voltage between the connections L+/M of

the DC UPS module falls below the set value of the 22 to 25.5 V

threshold.

After a power failure the battery module is disconnected auto-

matically from the loads by electronic means and immediately

recharged with a 0.2/0.4 A (DC UPS module 6 A), 0.35/0.7 A

(DC UPS module 15 A) or 1/2 A (DC UPS module 40 A) constant

current (U/I characteristic with 26.3 to 29.3 V end-of-charge volt-

age).

For increased load current demands (e.g., when incandescent

lamps, power contactors with DC auto-connected windings,

DC motors, DC/DC converters, electronic modules with high in-

put capacity are connected to the system), electronically limited

peak currents are supplied automatically.

The operating state (mains/battery operation, battery level

> 85 % as well as buffer ready/alarm) is signaled with LEDs and

isolated relay contacts.

For SIMOTION P350 and SIMOTION P320 applications, the UPS

module can be used with a serial interface or USB interface. The

operating state is indicated on an SP_SITOP application that is

already installed on SIMOTION P350 and SIMOTION P320. An

action can be defined for each status change of the UPS during

configuration of the application. The operating status of the UPS

is also available to the user program via a system variable.

■

Selection and ordering data

■

More information

For further information, see Catalog KT 10.1 and the Industry

Mall under Automation technology/Power supplies/

SITOP Power Supplies/24 V DC uninterruptible power supplies.

Description Order No.

SITOP DC UPS module

• 24 V / 6 A 6EP1931-2DC21

• 24 V / 6 A, with serial interface 6EP1931-2DC31

• 24 V / 6 A, with USB interface 6EP1931-2DC42

• 24 V / 15 A 6EP1931-2EC21

• 24 V / 15 A, with serial interface 6EP1931-2EC31

• 24 V / 15 A, with USB interface 6EP1931-2EC42

• 24 V / 40 A 6EP1931-2FC21

• 24 V / 40 A, with USB interface 6EP1931-2FC42

SITOP battery module

• 24 V / 1.2 Ah

for DC UPS module, 6 A 6EP1935-6MC01

• 24 V / 2.5 Ah

for DC UPS module, 6 A and 15 A 6EP1935-6MD31

• 24 V / 3.2 Ah

for DC UPS module, 6 A and 15 A 6EP1935-6MD11

• 24 V / 7 Ah

for DC UPS module, 6 A, 15 A and 40 A 6EP1935-6ME21

• 24 V / 12 Ah

for DC UPS module, 6 A, 15 A and 40 A 6EP1935-6MF01

SIMOTION I/O components

Power supplies

10/12 Siemens PM 21 · 2013

Uninterruptible power supplies

with capacitor module

■

Overview

DC UPS with capacitor module

Uninterruptible power supplies normally store the electrical

energy in lead-acid batteries. The temperatures that prevail

inside the cabinet, however, shorten the service life of the

batteries considerably and require regular replacement, e.g.

annually at ambient temperatures of 40 °C (104 °F). The innova-

tive SITOP UPS500 is, however, based on completely mainte-

nance-free capacitors with a long service life. Even at tempera-

tures of 50 °C (122 °F) they still have more than 80 % of their

capacity after 8 years, so there is no need to replace the energy

stores. Because the capacitors do not emit any gas, the control

cabinet does not have to be ventilated. Another advantage are

the significantly shorter charging times of the double-layer

capacitors which ensure that the buffer is ready very quickly

after loss of power.

■

Benefits

Basic device 15 A, SITOP UPS500S

7Compact design, degree of protection IP20

7Integrated energy storage: 2.5 kWs or 5 kWs

7Easily expanded with the 5 kWs expansion module

(up to 3 expansion modules can be connected)

7Signaling of the operating states and capacitor discharge

> 85 %

7Support for automatic reset of industrial PCs through

selectable shutdown characteristics

7USB interface

Basic device 7 A, SITOP UPS500P

7Compact design, degree of protection IP65

7For distributed applications without control cabinet

7Integrated energy storage: 5 kWs or 10 kWs

7High efficiency of approx. 96.6 %

7Low power losses of approx. 6 W at 7 A load current

7Signaling of the operating states and capacitor discharge

> 85 %

7USB interface

■

Function

Communication with the control can be implemented via the

USB interface. In the case of the UPS500S, also via relay

contacts.

The backup time is shorter than with lead-acid battery solutions,

but in many cases it suffices in order to back up data and shut

down the machine in a controlled manner.

■

Selection and ordering data

■

More information

For further information, see Catalog KT 10.1 and the Industry

Mall under Automation technology/Power supplies/

SITOP Power Supplies/24 V DC uninterruptible power supplies.

Description Order No.

SITOP UPS500S

with capacitor

• 24 V / 15 A,

with USB interface and 2.5 kWs 6EP1933-2EC41

• 24 V / 15 A,

with USB interface and 5 kWs 6EP1933-2EC51

SITOP UPS500P

with capacitor

• 24 V / 7 A,

with USB interface and 5 kWs 6EP1933-2NC01

• 24 V / 7 A,

with USB interface and 10 kWs 6EP1933-2NC11

Accessories

SITOP UPS501S

expansion module

For extension of the buffering time for

connection to a SITOP UPS500S

• 24 V / 15 A and 5 kWs 6EP1935-5PG01

Connector set for UPS500P

Input/output connector,

USB signal cable 2 m (6.56 ft)

6EP1975-2ES00

SIMOTION I/O components

SIMATIC S7-300 I/O

10/13

Siemens PM 21 · 2013

Summary

■

Overview

SIMATIC S7-300 I/O Modules

The following SIMATIC S7-300 I/O modules can be used as:

• Central I/O within SIMOTION C240.

The I/O configuration comprises two tiers for central I/O with

up to 8 I/O Modules per tier, of which up to 4 can be Analog

Modules. The second tier is connected over the IM 365

interface module.

• Distributed I/O in the modular I/O system SIMATIC ET 200M

with the IM 153 Head Module (up to 8 or 12 I/O Modules per

SIMATIC ET 200M, depending on the Head Module)

I/O modules transform the levels of the external digital and

analog process signals into the internal signal levels for

SIMOTION and vice versa. In addition, signal-preprocessing

Function Modules and Communication Modules are available.

■

Benefits

User benefits through use of SIMATIC S7-300 l/O modules

7Optimal adaptation

The number of inputs/outputs can be adapted to the

corresponding task with the help of modules which can be

combined as required. Unnecessary investments can be

avoided.

7Flexible process connection

SIMOTION can be connected to the process over different

digital and analog actuators and sensors.

7Powerful analog technology

Various input/output ranges and high resolution allows for the

connection of many different analog sensors and actuators.

7Intelligent function modules

Function Modules (FM) relieve the CPU from time-intensive

tasks such as counting and output cams.

7Communication modules

Communication modules (CP) implement serial data

exchange over point-to-point connections and connection

of AS-Interface slaves.

■

Design

SIMATIC S7-300 I/O Modules for digital and analog inputs/

outputs have the following mechanical characteristics:

• Compact design

The rugged plastic casing contains:

- Green LEDs for indicating the signal states on the inputs/

outputs

- Red LED to indicate that a diagnosis is being performed

(for modules capable of diagnostics)

- Sockets for front connectors, protected behind front door

- Labeling area on front door

• Simple assembly

The modules are mounted one after the other on the mounting

rail from the left to the right and connected to neighboring

modules with bus connectors. There are no slot rules.

•User-friendly wiring

The modules are wired with front connectors. When the mod-

ule is connected for the first time, a coding latches in the con-

nector so that the connector now only fits onto modules of the

same type. When a module is replaced, the front connector

can be plugged onto the new module of the same type with

the complete wiring. The front connectors are available with

screw-type or spring-loaded terminals or with the

FastConnect connection system.

■

Integration

Connectable devices

The following can be connected to SIMOTION over I/O Modules:

• Digital and analog sensors/actuators

• Switches

• Encoders

• Printers, barcode readers, ...

• AS-Interface slaves

• Identification systems

• Weighing systems

•…

■

More information

For further information, see Catalog ST 70 and the Industry Mall

under Automation technology/Automation Systems/

SIMATIC Industrial Automation Systems/Controllers/

SIMATIC S7 modular controllers/S7-300/S7-300F.

The I/O Modules which can be used with SIMOTION are listed in

a compatibility list which can be found at:

http://support.automation.siemens.com/WW/view/en/11886029

SIMOTION I/O components

SIMATIC S7-300 I/O

10/14 Siemens PM 21 · 2013

Digital Modules

■

Selection and ordering data

■

More information

For further information, see Catalog ST 70 and the Industry Mall

under Automation technology/Automation Systems/

SIMATIC Industrial Automation Systems/Controllers/

SIMATIC S7 modular controllers/S7-300/S7-300F/

Signal modules/Digital modules.

Description Order No.

Digital Input Modules SM 321 1),

isolated

•16 DI, 24 V DC

-Standard 6ES7321-1BH02-0AA0

- Isochronous, High Speed 6ES7321-1BH10-0AA0

- Active low input 6ES7321-1BH50-0AA0

•32 DI, 24 V DC, 40-pole 6ES7321-1BL00-0AA0

•64 DI, 24 V DC, active high/low

(parameterizable) 6ES7321-1BP00-0AA0

•8DI, 120/230 V AC

- Standard, 20-pole 6ES7321-1FF01-0AA0

- With single-root, 40-pole 6ES7321-1FF10-0AA0

•16 DI, 24 ... 48 V AC/DC

with single root, 40-pole 6ES7321-1CH00-0AA0

•16 DI, 48 ... 125 V DC, 20-pole 6ES7321-1CH20-0AA0

•16 DI, 120/230 V AC, 20-pole 6ES7321-1FH00-0AA0

•32 DI, 120 V AC, 40-pole 6ES7321-1EL00-0AA0

•16 DI, 24 V DC, 20-pole

Process alarm, diagnostics,

parameterizable input delay,

isochronous

6ES7321-7BH01-0AB0

Digital Output Modules SM 322 1),

isolated

•8DO, 24 V DC, 2 A, 20-pole 6ES7322-1BF01-0AA0

•8DO, 48 ... 125 V DC, 1.5 A, 20-pole 6ES7322-1CF00-0AA0

•16 DO, 24 V DC, 0.5 A, 20-pole

-Standard 6ES7322-1BH01-0AA0

- Isochronous, High Speed 6ES7322-1BH10-0AA0

•32 DO, 24 V DC, 0.5 A, 40-pole 6ES7322-1BL00-0AA0

•64 DO, 24 V DC, 0.3 A

- Current sourcing 6ES7322-1BP00-0AA0

- Current sinking 6ES7322-1BP50-0AA0

Digital Output Modules SM 322 1),

isolated

•8DO, 120/230 V AC, 1 A, 20-pole 6ES7322-1FF01-0AA0

•8DO, 120/230 V AC, 2 A, 40-pole

with single root and selectable

failure mode

6ES7322-5FF00-0AB0

•16 DO, 120/230 V AC, 1 A, 20-pole 6ES7322-1FH00-0AA0

•32 DO, 120/230 V AC, 1 A,

double-width, 2 × 20-pole 6ES7322-1FL00-0AA0

•8DO (relay), 24 V DC, 2 A or

230 V AC, 2 A, 20-pole 6ES7322-1HF01-0AA0

•8DO (relay), 120 V DC, 5 A or

230 V AC,

5 A, 40-pole, connector with spring-

loaded terminal, can be used for

6ES7392-1BM01-0AA0 and higher

6ES7322-1HF10-0AA0

•8DO (relay), 24 V DC,

120 ... 230 V AC, 5 A, 40-pole

with RC filter overvoltage protection

6ES7322-5HF00-0AB0

•16 DO, solid state relay,

24 ... 48 V AC/DC, 0.5 A,

40-pole with single root

6ES7322-5GH00-0AB0

•16 DO (relay), 24 ... 120 V DC, 2 A

or 48 ... 230 V AC, 2 A, 20-pole 6ES7322-1HH01-0AA0

•8DO, 24 V DC, 0.5 A, 20-pole

Short-circuit protection, diagnostics 6ES7322-8BF00-0AB0

SM323 / SM327 Digital Input/Output

Modules 1), isolated

•8DI, 8 DO, 24 V DC, 0.5 A, 20-pole 6ES7323-1BH01-0AA0

•16 DI, 16 DO, 24 V DC, 0.5 A, 40-pole 6ES7323-1BL00-0AA0

•8DI, 8 DX, 24 V DC, 0.5 A, 20-pole,

8 DX per single channel

parameterizable as DI or DO

6ES7327-1BH00-0AB0

Description Order No.

1) Incl. labeling strips and bus connectors, front connector required

(if not specified otherwise).

64-channel modules require special terminal blocks and connecting

cables, see Accessories and spare parts.

SIMOTION I/O components

SIMATIC S7-300 I/O

10/15

Siemens PM 21 · 2013

Analog Modules

■

Selection and ordering data

■

More information

For further information, see Catalog ST 70 and the Industry Mall

under Automation technology/Automation Systems/

SIMATIC Industrial Automation Systems/Controllers/

SIMATIC S7 modular controllers/S7-300/S7-300F/

Signal modules/Analog modules.

Description Order No.

Analog Input Modules SM 331 1),

isolated

•2AI, 20-pole

(1 Al for resistance-based sensor),

U/I/thermoelement/resistor/

Pt 100/Ni 100, alarm, diagnostics,

resolution 9/12/14 bit (+ sign)

6ES7331-7KB02-0AB0

•8AI, 20-pole

(4 Al for resistance-based sensor),

U/I/thermoelement/resistor/

Pt 100/Ni 100, alarm, diagnostics,

resolution 9/12/14 bit (+ sign)

6ES7331-7KF02-0AB0

•8AI, 40-pole

U/I/resistor/Pt 100/Ni 100/Ni 1000/

LG-Ni 1000 (standard, air-conditioned),

resolution 12 bit +sign/13 bit

6ES7331-1KF02-0AB0

•8AI, 40-pole

U/I, alarm and diagnostics,

resolution 13 bit + sign/14 bit,

isochronous, High Speed

6ES7331-7HF01-0AB0

•8AI, 40-pole

U/I, alarm and diagnostics,

resolution 15 bit (+ sign)

- 2 channels with limit value monitoring,

isolation between channels and

backplane bus

6ES7331-7NF00-0AB0

- Fast measured value update,

8 channels with limit value monitoring,

isolation between channels and

backplane bus as well as between

channels in groups of 2

6ES7331-7NF10-0AB0

•8AI, 40-pole

2/3/4-wire, resistor,

Pt 100/200/500/1000,

Ni 100/120/200/500/1000,

Cu 10, characteristics acc. to GOST,

16 bit (24 bit internally)

6ES7331-7PF01-0AB0

•8AI, 40-pole

thermoelements

Types B, E, J, K, L, N, R, S, T, U,

TXK/TXK(L) according to GOST,

16 bit (24 bit internally)

6ES7331-7PF11-0AB0

Analog Output Modules SM 332 1),

isolated

•AO,

0...10V, ±10V, 1...5V,

0/4 ... 20 mA, ± 20 mA

11 bit + sign/12 bit

- 2 AO, 20-pole 6ES7332-5HB01-0AB0

- 4 AO, 20-pole 6ES7332-5HD01-0AB0

- 8 AO, 40-pole 6ES7332-5HF00-0AB0

•4AO, 20-pole

0...10 V, ±10V, 1...5V,

0/4 ... 20 mA, ± 20 mA

14 bit + sign/15 bit + sign,

isochronous, High Speed

6ES7332-7ND02-0AB0

Fast analog Input/Output Modules

SM 334 1)

•4AI, 2AO, 20-pole

non-isolated,

0to10V, 0...20mA, 8bit

6ES7334-0CE01-0AA0

•4AI, 2AO, 20-pole

(2 AI under power),

isolated, 12 bit,

Input: 0 ... 10 V,

Pt 100 (climatic range only),

resistance measurement 10 kΩ,

Output: 0 ... 10 V

6ES7334-0KE00-0AB0

Fast analog Input/Output Modules

SM 335 1)

4 fast analog inputs (basic conversion

time for 4 channels, max. 1 ms),

4 fast analog outputs (conversion time

per channel, max. 0.8 ms),

encoders supplied with 10 V/25 mA,

1 counter input (24 V/500 Hz),

special operating modes:

"Measuring only" and "Comparator"

4 AI, 4 AO, 20-pole

isolated,

alarm and diagnostics,

Input:

±1 V, ±2.5 V, ±10 V,

0...2V, 0...10 V, ±10mA,

0/4 ... 20 mA, 13 bit + sign, 14 bit;

(up to 2 channels parameterizable)

Output:

±10 V, 0 ... 10 V, 11 bit + sign, 12 bit

6ES7335-7HG02-0AB0

Accessories See Accessories and spare

parts

Description Order No.

1) Incl. labeling strips and bus connectors, front connector required

(if not specified otherwise).

SIMOTION I/O components

SIMATIC S7-300 I/O

10/16 Siemens PM 21 · 2013

FM 350-1 Counter Module

■

Overview

• Single-channel, intelligent Counter Module for simple

counting tasks

• For direct connection of 24 V incremental encoders

• Compare function with two definable comparison values

• Integrated digital outputs for response output when the

comparison value is reached

• Operating modes:

- Continuous counting

- One-time counting

- Periodic counting

• Special functions:

- Set counter

- Latch counter

- Start/stop counter via gate function

• Plug-in option for 20-pole front connector

■

Integration

The single-channel FM 350-1 Counter Module can be operated

as follows:

• Centrally on SIMOTION C

• Distributed (via SIMATIC ET 200M) on SIMOTION C,

SIMOTION P and SIMOTION D

The standard functions required to use the FM 350-1 Counter

Module in combination with SIMOTION are part of the SCOUT

command library.

■

Selection and ordering data

■

Overview

• 8-channel intelligent Counter Module for universal counting

and measuring tasks

• For direct connection of 24 V incremental encoders, direction

encoders, initiators, or NAMUR encoders

• Compare function with definable comparison values

(number depends on operating mode)

• Integrated digital outputs for response output when the

comparison value is reached

• Operating modes:

- Continuous/one-time/periodic counting

- Frequency/speed measurement

- Period measurement

-Dosing

• Plug-in option for 40-pole front connector

■

Integration

The 8-channel FM 350-2 Counter Module can be operated as

follows:

• Centrally on SIMOTION C

• Distributed (via SIMATIC ET 200M) on SIMOTION C,

SIMOTION P and SIMOTION D

The standard functions required to use the FM 350-2 Counter

Module in combination with SIMOTION are part of the SCOUT

command library

■

Selection and ordering data

Description Order No.

FM 350-1 Counter Module

max. 500 kHz, 1 channel, incl.

SIMATIC configuration package

on CD-ROM

6ES7350-1AH03-0AE0

Description Order No.

FM 350-2 Counter Module

max. 20 kHz, 8 channels, incl.

SIMATIC configuration package

on CD-ROM

6ES7350-2AH01-0AE0

FM 350-2 Counter Module

SIMOTION I/O components

SIMATIC S7-300 I/O

10/17

Siemens PM 21 · 2013

FM 352-5 High-speed Boolean processor

■

Overview

• High-speed electronic cam controller

• Economical alternative to mechanical cam controllers

• 32 cam tracks, 13 onboard digital outputs for the direct output

of actions

• Position sensing by means of incremental encoder or absolute

encoder with synchronous serial transmission (SSI)

• Plug-in option for 20-pole front connector

■

Integration

The FM 352 Electronic cam controller can be operated:

• Centrally on SIMOTION C

• Distributed (via SIMATIC ET 200M) on SIMOTION C,

SIMOTION P and SIMOTION D

The standard functions required to use the FM 352 cam

controller in combination with SIMOTION are part of the

SCOUT command library.

■

Selection and ordering data

■

Overview

• High-speed processor for Boolean operations (LAD, FBD);

processes them at a fixed cycle time of 1 µs.

• Designed for applications that require an extremely fast

response time

• 12 integrated digital inputs

• 8 integrated digital outputs

• 1 channel for connection of a 24 V incremental encoder, a 5 V

incremental encoder (RS 422) or an SSI absolute encoder

• The application program is written with the STEP 7 program

editor and stored on the Micro Memory Card (MMC) in

compiled form after successful simulation

• Plug-in option for 40-pole front connector

■

Integration

The FM 352-5 High-speed Boolean processor can be operated:

• Centrally on SIMOTION C

• Distributed (via SIMATIC ET 200M) on SIMOTION C,

SIMOTION P and SIMOTION D

■

Selection and ordering data

Description Order No.

FM 352

Electronic cam controller

Incl. SIMATIC configuration package

on CD-ROM

6ES7352-1AH02-0AE0

Sub-D connector

15-pole, pins; for encoder cable 6ES5750-2AA21

Description Order No.

FM 352-5

High-speed Boolean processor

• With current sinking digital outputs 6ES7352-5AH01-0AE0

• With current sourcing digital outputs 6ES7352-5AH11-0AE0

Micro Memory Card

• 128 KB 6ES7953-8LG20-0AA0

• 512 KB 6ES7953-8LJ30-0AA0

FM 352 Electronic cam controller

SIMOTION I/O components

SIMATIC S7-300 I/O

10/18 Siemens PM 21 · 2013

CP 340 Communication Module

■

Overview

• The cost-effective, complete solution for serial communication

over a point-to-point connection

• 3 versions with various physical transmission characteristics:

- RS 232 C (V.24),

- 20 mA (TTY),

- RS 422/RS 485 (X.27)

• Implemented protocols: ASCII, 3964 (R) and printer driver

(3964; not for RS 485)

• Simple configuration over SCOUT with integrated

parameterization tool

■

Integration

The CP 340 Communication Module can be operated:

• Centrally on SIMOTION C

• Distributed (via SIMATIC ET 200M) on SIMOTION C,

SIMOTION P and SIMOTION D

The standard functions required to use the CP 340

Communication Module in combination with SIMOTION are part

of the SCOUT command library.

■

Selection and ordering data

■

Overview

• The fast and powerful serial data exchange over a point-to-

point connection

• 3 versions with various physical transmission characteristics:

- RS 232 C (V.24),

- 20 mA (TTY),

- RS 422/RS 485 (X.27)

• Implemented protocols: ASCII, 3964 (R), RK 512

• Simple configuration over SCOUT with integrated

parameterization tool

■

Integration

The CP 341 Communication Module can be operated:

• Centrally on SIMOTION C

• Distributed (via SIMATIC ET 200M) on SIMOTION C,

SIMOTION P and SIMOTION D

The loadable special drivers of the CP 341 Communication

Module are not supported by SIMOTION.

The standard functions required to use the CP 341

Communication Module in combination with SIMOTION are part

of the SCOUT command library.

■

Selection and ordering data

Description Order No.

CP 340 Communication Module

Incl. SIMATIC configuration package on

CD-ROM with:

• 1 RS 232 C interface (V.24) 6ES7340-1AH02-0AE0

• 1 20 mA interface (TTY) 6ES7340-1BH02-0AE0

• 1 RS 422/485 (X.27) interface 6ES7340-1CH02-0AE0

RS 232 C signal cable

each 9-pole Sub-D socket

• 5 m (16.41 ft) 6ES7902-1AB00-0AA0

• 10 m (32.81 ft) 6ES7902-1AC00-0AA0

• 15 m (49.22 ft) 6ES7902-1AD00-0AA0

20 mA (TTY) signal cable

each 9-pole Sub-D connector

• 5 m (16.41 ft) 6ES7902-2AB00-0AA0

• 10 m (32.81 ft) 6ES7902-2AC00-0AA0

• 50 m (164 ft) 6ES7902-2AG00-0AA0

RS 422/485 signal cable

each 15-pole Sub-D connector

• 5 m (16.41 ft) 6ES7902-3AB00-0AA0

• 10 m (32.81 ft) 6ES7902-3AC00-0AA0

• 50 m (164 ft) 6ES7902-3AG00-0AA0

Description Order No.

CP 341 Communication Module

Incl. SIMATIC configuration package

on CD-ROM with:

• 1 RS 232 C interface (V.24) 6ES7341-1AH02-0AE0

• 1 20 mA interface (TTY) 6ES7341-1BH02-0AE0

• 1 RS 422/485 (X.27) interface 6ES7341-1CH02-0AE0

RS 232 C signal cable

each 9-pole Sub-D socket

• 5 m (16.41 ft) 6ES7902-1AB00-0AA0

• 10 m (32.8 ft) 6ES7902-1AC00-0AA0

• 15 m (49.22 ft) 6ES7902-1AD00-0AA0

20 mA (TTY) signal cable

each 9-pole Sub-D connector

• 5 m (16.41 ft) 6ES7902-2AB00-0AA0

• 10 m (32.81 ft) 6ES7902-2AC00-0AA0

• 50 m (164 ft) 6ES7902-2AG00-0AA0

RS 422/485 signal cable

each 15-pole Sub-D connector

• 5 m (16.41 ft) 6ES7902-3AB00-0AA0

• 10 m (32.81 ft) 6ES7902-3AC00-0AA0

• 50 m (164 ft) 6ES7902-3AG00-0AA0

CP 341 Communication Module

SIMOTION I/O components

SIMATIC S7-300 I/O

10/19

Siemens PM 21 · 2013

DM 370 Dummy Module

■

Overview

• Simulator Module for program testing during commissioning

and operation

• Simulation of sensor signals over switches

• Display of signal states on outputs with LEDs

■

Design

The front panel is equipped with:

• 16 switches for the simulation of input signals

• 16 LEDs for displaying the signal state at outputs

• Mode selector

With the aid of a screwdriver, you can set three operating

modes:

- 16 inputs (input simulation only)

- 16 outputs (output simulation only)

- 8 inputs and 8 outputs (input and output simulation)

■

Function

The SM 374 Simulator Module is mounted onto the

SIMATIC S7-300 mounting rail instead of a Digital Input or

Output Module.

The CPU reads the set input signal states of the Simulator

Module and processes these in the user program. The output

signal states are sent to the module as a result and are indicated

with LEDs.

■

Selection and ordering data

■

Overview

• Dummy Module for reserving slots for unconfigured Signal

Modules

• When replaced with a Signal Module (SM), configuration and

address assignment remain unchanged

■

Application

The DM 370 Dummy Module reserves a slot for an unconfigured

Signal Module.

When replaced with a Signal Module, the mechanical configura-

tion and address assignment of the overall configuration remain

unchanged.

■

Selection and ordering data

Description Order No.

SM 374 Simulator Module 6ES7374-2XH01-0AA0

For simulating 16 inputs or 16 outputs

or 8 inputs and 8 outputs

(16 switches, 16 LEDs)

Description Order No.

DM 370 Dummy Module

Incl. bus connector,

labeling strips

6ES7370-0AA01-0AA0

SM 374 Simulator Module

SIMOTION I/O components

SIMATIC S7-300 I/O

10/20 Siemens PM 21 · 2013

Accessories and spare parts

■

Selection and ordering data

■

More information

For further information, see Catalog ST 70 and the Industry Mall

under Automation technology/Automation Systems/

SIMATIC Industrial Automation Systems/Controllers/

SIMATIC S7 modular controllers/S7-300/S7-300F.

Description Order No.

Bus connector 6ES7390-0AA00-0AA0

Slot label

Labeling sheet, DIN A4, film, perforated,

for printing with laser printer; 10 sheets

6ES7912-0AA00-0AA0

For signal modules (16 channels)

•petrol 6ES7392-2AX00-0AA0

• light-beige 6ES7392-2BX00-0AA0

• yellow 6ES7392-2CX00-0AA0

•red 6ES7392-2DX00-0AA0

For signal modules (32 channels)

•petrol 6ES7392-2AX10-0AA0

• light-beige 6ES7392-2BX10-0AA0

• yellow 6ES7392-2CX10-0AA0

•red 6ES7392-2DX10-0AA0

Labeling strips

10 units

• For modules

with 20-pole front connector 6ES7392-2XX00-0AA0

• For modules

with 40-pole front connector 6ES7392-2XX10-0AA0

Cover foil for labeling strips

10 units (spare part)

• For modules

with 20-pole front connector 6ES7392-2XY00-0AA0

• For modules

with 40-pole front connector 6ES7392-2XY10-0AA0

Shield connection element

80 mm (3.15 in) wide, with 2 rows for

4 shield terminal elements each

6ES7390-5AA00-0AA0

Shield terminal element

2 units per packaging unit

• For 2 cables

with 2 ... 6 mm (0.08 ... 0.24 in) Ø 6ES7390-5AB00-0AA0

• For 1 cable

with 3 ... 8 mm (0.12 ... 0.31 in) Ø 6ES7390-5BA00-0AA0

• For 1 cable

with 4 ... 13 mm (0.16 ... 0.51 in) Ø 6ES7390-5CA00-0AA0

Front door

Raised design

5 units per packaging unit

6ES7328-0AA00-7AA0

Front connector

with screw-type terminals

• 20-pole, 1 unit 6ES7392-1AJ00-0AA0

• 20-pole, 100 units 6ES7392-1AJ00-1AB0

• 40-pole, 1 unit 6ES7392-1AM00-0AA0

• 40-pole, 100 units 6ES7392-1AM00-1AB0

Front connector

with spring-loaded terminals

• 20-pole, 1 unit 6ES7392-1BJ00-0AA0

• 20-pole, 100 units 6ES7392-1BJ00-1AB0

• 40-pole, 1 unit 6ES7392-1BM01-0AA0

• 40-pole, 100 units 6ES7392-1BM01-1AB0

Front connector

with FastConnect terminals

• 20-pole, 1 unit 6ES7392-1CJ00-0AA0

• 40-pole, 1 unit 6ES7392-1CM00-0AA0

Terminal block and signal cable for

64-channel modules

2 terminal blocks and 2 connecting

cables are required per module

• Length 1 m (3.28 ft), 2 units 6ES7392-4BB00-0AA0

• Length 2.5 m (8.20 ft), 2 units 6ES7392-4BC50-0AA0

• Length 5 m (16.41 ft), 2 units 6ES7392-4BF00-0AA0

• Terminal block

with screw-type terminals, 2 units 6ES7392-1AN00-0AA0

• Terminal block

with spring-loaded terminals, 2 units 6ES7392-1BN00-0AA0

Effective Range Modules for

analog inputs

2 units

6ES7974-0AA00-0AA0

Fuse set

10 fuses 8 A, quick-response,

2 fuse holders

6ES7973-1HD00-0AA0

Sub-D connector

• 9-pole, pins 6ES5750-2AA11

• 9-pole, socket 6ES5750-2AB11

• 15-pole, pins 6ES5750-2AA21

Mounting rail, SIMATIC S7-300

• Length 160 mm (6.30 in) 6ES7390-1AB60-0AA0

• Length 480 mm (18.90 in) 6ES7390-1AE80-0AA0

• Length 530 mm (20.87 in) 6ES7390-1AF30-0AA0

• Length 830 mm (32.68 in) 6ES7390-1AJ30-0AA0

• Length 2000 mm (78.74 in) 6ES7390-1BC00-0AA0

SIMATIC Manual Collection

Electronic manuals

on DVD, multilingual

6ES7998-8XC01-8YE0

SIMATIC Manual Collection

Update service for 1 year

Current manual collection DVD as well as

the three subsequent updates

6ES7998-8XC01-8YE2

Description Order No.

SIMOTION I/O components

Distributed I/O

10/21

Siemens PM 21 · 2013

Summary

■

Overview

SIMATIC ET 200 variants

Perfect communication on all levels

Distributed machine and plant configurations have now become

common practice in automation technology. This reduces the

wiring layout and significantly increases flexibility and reliability.

PROFINET and PROFIBUS DP are available for connecting

distributed I/O. And the AS-Interface handles communication

on the actuator/sensor level. This allows problem-free data

exchange throughout the whole automation world.

PROFIBUS DP

PROFIBUS DP is a fast, standardized bus system for the field

level.

With the distributed SIMATIC ET 200 I/O system, digital and

analog inputs and outputs can be connected to SIMOTION.

Intelligent I/O modules can also be used distributedly with

SIMATIC ET 200.

The isochronous mode functionality also allows PROFIBUS DP

to be used for high-speed, deterministic I/O processing as well

as for integrating drives.

PROFINET

PROFINET is the innovative and open Industrial Ethernet

standard (IEC 61158) for industrial automation. With PROFINET,

devices can be linked up from the field level through to the

management level. PROFINET is supported by the SINAMICS

drive system and the SIMATIC ET 200S, SIMATIC ET 200M,

SIMATIC ET 200pro and SIMATIC ET 200eco PN distributed I/O

systems.

With Isochronous Real-Time (IRT) and the new SIMATIC ET 200S

High Speed I/O, cycle times of 250 µs are achieved on the basis

of PROFINET.

Controller device configuration on PROFINET

AS-Interface

With AS-Interface, actuators and sensors on the field level can

be connected with a simple two-wire line. In addition to commu-

nication, this two-wire line is also used to supply the individual

stations with power.

PROFINETDevice Controller

SINAMICS S120

SIMATIC ET 200

e. g. SIMATIC ET 200S

SINAMICS S120

Power Module with

CU310-2

SINAMICS G120 with

Control Unit

G_PM10_EN_00219

SIMATIC HMI

SIMOTION C

SIMATIC S7

SIMOTION D

SIMOTION P

PG/PC

SIMOTION I/O components

Distributed I/O

10/22 Siemens PM 21 · 2013

Summary

■

Overview (continued)

SIMATIC ET 200 distributed I/O

The distributed SIMATIC ET 200 I/O provide I/O systems for

many different applications:

• SIMATIC ET 200M: The modular I/O system for control cabinet

installation and high channel densities

• SIMATIC ET 200S: The finely scalable I/O system for control

cabinet installation and time-critical applications in particular;

including motor starters, safety technology and individual

grouping of load groups

• SIMATIC ET 200pro: The modular I/O system with IP65/67

degree of protection for cabinet-free use close to the machine;

with features such as small frame size, integrated PROFIsafe

safety technology, PROFINET connection and hot swapping of

modules

• SIMATIC ET 200eco: The compact, economical I/O system

with IP65/67 degree of protection for local use without a con-

trol cabinet with flexible and fast ECOFAST or M12 connection

system over PROFIBUS DP

• SIMATIC ET 200eco PN: The compact, economical I/O system

with IP65/67 degree of protection for local use without a con-

trol cabinet with flexible and fast M12 connection system over

PROFIBUS IO

• SIMATIC ET 200SP: The SIMATIC ET 200SP distributed I/O

system is a scalable and extremely flexible distributed I/O

system for interfacing the process signals to a central control

system via PROFINET. The distributed I/O system is particu-

larly easy to use and, with its compact design, offers maxi-

mum economy in the control cabinet. High speed and trans-

mission rates provide significantly stronger performance than

conventional systems. SIMATIC ET 200SP I/O is not integrated

in STEP 7 HW Config as standard and is supported for

SIMOTION only via the GSDML (device description file) in

SCOUT.

Complete list of I/O that can be used

A list of all the I/O modules that can currently be used with

SIMOTION is available under the following link:

http://support.automation.siemens.com/WW/view/en/11886029

■

More information

For further information, see Catalog IK PI and the Industry Mall

under Automation technology/Automation Systems/

SIMATIC Industrial Automation Systems/

SIMATIC ET 200 Distributed I/O or at

www.siemens.com/et200

SIMOTION I/O components

Distributed I/O

10/23

Siemens PM 21 · 2013

SIMATIC ET 200M

■

Overview

SIMATIC ET 200M with power supply

SIMATIC ET 200M is a modular I/O system with IP20 degree of

protection.

It can be expanded with Signal Modules, Communication

Modules and Function Modules of the SIMATIC S7-300 auto-

mation system.

Due to the wide range of modules available, the

SIMATIC ET 200M I/O system is especially well-suited for

complex automation tasks with a high channel density.

For SIMATIC ET 200M, interface modules are available with

PROFIBUS DP or PROFINET interfaces.

Signal states can be detected and output synchronously and

at specified times via the isochronous PROFIBUS DP in combi-

nation with the IM 153-2 High Feature interface module. Isochro-

nous mode is supported by selected I/O modules (see

SIMATIC S7-300 I/O or SIMATIC ET 200M manual). It is possible

to combine isochronous and non-isochronous modules in a

single station.

■

Design

The SIMATIC ET 200M modular distributed I/O system consists

• one IM 153 interface module,

• depending on the IM 153 interface module, 8 or 12 I/O

modules of the SIMATIC S7-300 automation system and

• a PS307 power supply, if required.

The I/O modules can be combined as required and therefore

optimally adapted to requirements.

The SIMATIC ET 200M I/O system is connected to PROFIBUS DP

or PROFINET over an IM 153 interface module.

It can be connected to PROFIBUS DP with fiber-optic cables

through integrated interfaces on the IM 153-2 FO or through

additional OLMs (Optical Link Modules) or OBTs (Optical Bus

Terminals).

Connection with bus connectors

The simple design with bus connectors of the SIMATIC S7-300

series makes SIMATIC ET 200M flexible and service-friendly:

• Module installation

The modules are simply hooked onto the rail, swung into place

and screwed tight.

• Integral backplane bus

The backplane bus is integrated in the modules. Module inter-

facing takes place by means of bus connectors inserted into

back of the housing.

■

Function

The user program in the SIMOTION Motion Control System can

access the inputs and outputs of the SIMATIC ET 200M modular

I/O system in the same manner as central inputs and outputs.

Communication over the bus system is handled completely by

the SIMOTION Master and the IM 153 interface module. The

diagnostics function is used to check that the SIMATIC ET 200M

is operating correctly.

The SIMATIC ET 200M I/O system diagnoses the following:

• Module faults

• Short-circuits (outputs)

• Bus faults, i.e. faulty data transfer

• 24 V DC load voltage supply

■

Selection and ordering data

Ordering data Order No.

IM 153-1

Interface Module

For connecting to PROFIBUS DP,

with RS 485 interface, for max.

8 SIMATIC S7-300 modules

6ES7153-1AA03-0XB0

IM 153-2

High Feature Interface Module

For connecting to PROFIBUS DP,

with RS 485 interface, for max.

12 SIMATIC S7-300 modules,

isochronous

6ES7153-2BA02-0XB0

IM 153-4 PN

Interface Module

For connecting to PROFINET, for max.

12 SIMATIC S7-300 modules

6ES7153-4AA01-0XB0

IM 153-4 PN

High Feature Interface Module

For connecting to PROFINET, for max.

12 SIMATIC S7-300 modules with

integrated switch

6ES7153-4BA00-0XB0

SIMOTION I/O components

Distributed I/O

10/24 Siemens PM 21 · 2013

SIMATIC ET 200S

■

Overview

SIMATIC ET 200S Compact

• Extended block I/O with IP20 degree of protection and

32 integrated channels, comprising of terminal block and

electronic block

• 2 variants: 32 DI or 16 DI/16 DO

• Finely scalable expansion to a maximum of 128 channels or

12 modules

• The complete SIMATIC ET 200S module spectrum can be

used (with the exception of PROFIsafe modules and reserve

modules)

• Minimal width supports installation in particularly small,

compact terminal boxes

• Separation of connections and electronics with permanent

wiring

• Screw-type and spring-loaded terminal connections

• Standard terminal block with 2-wire connection system;

3-wire and 4-wire systems available using optional add-on

terminals

• Installation on a DIN rail

• Hot swapping of expansion modules

• Communication via PROFIBUS

• Up to 100 bytes inputs and outputs (address space)

• The system characteristics meet high machine and plant

availability requirements.

• SIMATIC ET 200 Configurator software for designing the

SIMATIC ET 200S Compact and creating order lists

SIMATIC ET 200S

• Distributed I/O system with IP20 degree of protection with

minimal wiring

• Can be used with integrated SIMATIC S7-CPU as mini PLC:

- also available as a fail-safe PROFIsafe version

- with optional lower-level PROFIBUS DP

• Finely modular design for adaptation to the automation task

at hand.

• Interface modules available with PROFIBUS DP or

PROFINET interfaces

• PROFINET modules with integrated 2-port switch for a line

topology

• The optimum solution for extremely time-critical tasks

- Cycle times down to 250 µs based on PROFINET IO

with Isochronous Real-Time (IRT)

- Short terminal-to-terminal times through High Speed analog

modules with conversion times of ≤ 20 µs per channel

• Combine digital and analog input or output modules,

technology modules, motor starters and frequency converters

• Modules can be replaced during operation (hot swapping)

• Channel-specific diagnostics for high availability

• Can be supplied with integrated fiber optic interface if

required

• Transfer rate up to 12 Mbit/s (PROFIBUS) or 100 Mbit/s

(PROFINET)

• Flexible connection method (2/3/4-wire connections as

screwtype and spring-loaded terminals and FastConnect

which requires no insulation stripping)

• Variable potential groups through power modules

• Option handling with or without reserve modules

• SIMATIC ET 200 Configurator software for designing the

SIMATIC ET 200S and creating order lists

SIMOTION I/O components

Distributed I/O

10/25

Siemens PM 21 · 2013

SIMATIC ET 200S

■

Application

The comprehensive module range with uniform handling for

configuration, assembly and programming allows the

SIMATIC ET 200S to be used as a universal I/O system.

The finely scalable design permits fast and optimal adaptation

to the requirements of the automation task:

• No reserves

• No unnecessary channels

Even if requirements change frequently, setup times can be

reduced significantly by replacing or combining different I/O

modules.

The transmission rate of up to 12 Mbit/s with PROFIBUS DP

and 100 Mbit/s with PROFINET IO as well as the powerful inter-

nal data transmission makes the SIMATIC ET 200S also perfectly

suited for extremely time-critical applications such as highly

dynamic hydraulic applications with position and pressure

control.

In combination with the interface module

• IM 151-1 High Feature (PROFIBUS) or

• IM 151-3 PN High Speed (PROFINET)

signal states can be synchronously acquired or output over

the isochronous PROFIBUS DP or over PROFINET IO with IRT

at precisely defined points in time. Isochronous mode is sup-

ported by selected I/O modules (see SIMATIC S7-300 I/O or

SIMATIC ET 200S manual). It is possible to combine isochro-

nous and non-isochronous modules in a single station.

In addition to Interface Modules for connecting the

SIMATIC ET 200S to PROFIBUS DP or PROFINET IO (either

electrical or optical interface) for distributed automation tasks,

an Interface Module with an integrated CPU is also available.

The maintenance free CPU (without battery) integrated in the

Interface Module is based on the SIMATIC S7-300 CPU 314 and

is programmed with STEP 7. The CPU permits distributed on-site

preprocessing of process data and communicates with the high-

erlevel motion control system as a PROFIBUS DP slave or

PROFINET IO Device.

Two different variants are available for integrating safety

technology with SIMATIC ET 200S:

• Over local safety components in motor starter applications

• Over PROFIsafe components that replace the wiring-based

safety logic with a freely programmable controller (up to SIL 3

according to IEC 61508 and Category 4 according to

EN 954-1).

The construction of the SIMATIC ET 200S allows it to be used

under increased mechanical load. The system features support

high machine availability requirements.

■

Design

The SIMATIC ET 200S distributed I/O system consists of:

• IM 151 Interface Module

• Digital and Analog Electronic Modules

• Technology modules, e. g., for counter/position detection

tasks

• Motor starters and frequency converters

• Terminating module (part of the scope of supply of the IM 151)

• Power modules

One SIMATIC ET 200S station comprises of up to 63 I/O

modules. The I/O modules can be combined as required.

The SIMATIC ET 200S is installed with permanent wiring:

All modules are plugged onto purely mechanical Terminal

Modules. These Terminal Modules contain the complete wiring

and can be mounted on standard 35 × 15 mm (1.38 × 0.59 in)

or 35 × 7.5 mm (1.38 × 0.30 in) mounting rails.

This results in the following advantages:

• Simple implementation of the wiring without additional

electronics components

• Fast and safe testing of wiring even under power

• Tool-free replacement of Electronics Modules

• Automatic coding of Electronics Modules for safe replacement

(protected against polarity reversal)

The SIMATIC ET 200 Configurator software for designing the

SIMATIC ET 200S and creating order lists is available for down-

load:

www.siemens.com/ET200

SIMOTION I/O components

Distributed I/O

10/26 Siemens PM 21 · 2013

SIMATIC ET 200S

■

Function

IM 151-3 PN High Speed Interface Module:

Ideal for fast I/O processing with SIMATIC ET 200S and

PROFINET

The IM 151-3 PN High Speed Interface Module supports the

following on a PROFINET IO basis with Isochronous Real-Time

(IRT):

• Isochronous acquisition/output of signal states, synchronized

with the user program

• Implementation of fast cycle times of 250 µs.

In comparison to PROFIBUS applications, much shorter

terminal-to-terminal times can be implemented on the basis

of PROFINET.

• The high data transmission rate of 100 Mbit/s and full-duplex

mode (simultaneous transmitting and receiving) enable larger

I/O volumes to be transmitted with the same bus cycle time as

compared to PROFIBUS (125 bytes are transferred in approx-

imately 10 µs).

• This communication performance is available on every

PROFINET port of the controller – i.e. 3 ports on the

SIMOTION D4x5-2 DP/PN, C240 PN and P320-3 or 4 ports on

the SIMOTION P350-3 with MCI-PN Communication Board.

• The IM 151-3 PN High Speed Interface Module as well as the

associated I/O modules have extremely short signal process-

ing times (e.g. conversion time of ≤20 µs per channel for

Analog Modules) so that even during the same bus cycle sig-

nificantly shorter terminal-to-terminal times can be achieved

with PROFINET than with a comparable PROFIBUS cycle. The

big advantage: the terminal-to-terminal times are reduced

without reducing the computing time available to the applica-

tion.

• Apart from Isochronous Real-Time (IRT) communication,

Real-Time (RT) communication and standard TCP/IP commu-

nication can also be executed without losing the deterministic

response of the IRT message frames due to the bandwidth

reserved for IRT.

The minimum cycle times are usually dependent on the applica-

tion to be implemented (computing load) and the performance

capability of the controller used, for example:

• SIMOTION P320-3/SIMOTION P350-3: Minimum 250 µs.

• SIMOTION D435-2/SIMOTION D445-2/SIMOTION D455-2:

Minimum 250 µs.

SIMATIC ET 200S is the optimum I/O system for closed-loop

control and motion control applications in which short cycle

times, isochronous/equidistant signal acquisition and signal

output are required.

SIMATIC ET 200S also supports the accurate and high-speed

acquisition of digital inputs as well as time or position-based

switching of digital outputs. For position-based switching of

digital outputs, the SIMATIC ET 200S output is assigned to the

SIMOTION technology object "TO Output Cam" or "TO Cam

Track".

The modules listed below support isochronous operation

with bus cycle times of 250μs minimum:

Description

Interface Modules IM 151-3 PN High Speed

Power Modules PM-E 24 V DC Standard

PM-E 24 ... 48 V DC

Digital Electronic Modules 4 DI 24 V DC, High Feature

4 DO 24 V DC/0.5 A Standard

4 DO 24 V DC/2 A Standard

Analog Electronic Modules 2 AI, U, High Speed

2 AI, I, 2-wire High Speed

2 AI, I, 4-wire High Speed

2 AO, U, High Speed

2 AO, I, High Speed

Technology Modules SSI module, 1 channel

Counter module 1 COUNT, 24 V/100 kHz,

1 channel

Counter module 1 COUNT, 5 V/500 kHz,

1 channel

Closed-loop control/Motion control

Acquisition of signalsOutput of signals

Applications with high-speed isochronous I/O devices

Hydraulic applications

with closed-loop position control (e.g. folding, pipe bending)

with closed-loop position and pressure control (e.g. hydraulic

universal, IHU and powder metal presses as well as bed cushions)

Speed and position detection

Dancer control

Time/position-based

acquisition of binary signals

Quality control

Product tracking

Tool monitoring

Monitoring of machine

states

Time/position-based

setting of binary signals

Time/position-based

switching of actuators

Product rejection

Trigger signal for

measuring systems

Isochronous and equidistant acquisition/output of signals

with short terminal-to-terminal times by means of:

High-speed peripheral modules

Synchronization of control system, bus and I/O

Short cycle times in the controller

G_PM10_EN_00167a

SIMOTION I/O components

Distributed I/O

10/27

Siemens PM 21 · 2013

SIMATIC ET 200S

■

Selection and ordering data

Description Order No.

IM 151-1 Compact Interface Module

for PROFIBUS DP

Transmission rate up to 12 Mbit/s;

for connecting to PROFIBUS DP,

with RS 485 interface; expandable

with up to 12 power, electronic and

motor starter modules (except F and

reserve modules); including termination

module

•32 DI, 24 V DC

32 digital inputs 6ES7151-1CA00-1BL0

•16 DI, 24 V DC;

16 DO, 24 V DC/0.5 A

16 digital inputs

and 16 digital outputs

6ES7151-1CA00-3BL0

Terminal Modules

for SIMATIC ET 200S Compact

•TM-C120S Compact

With screw terminals 6ES7193-4DL10-0AA0

•TM-C120C Compact

With spring-loaded terminals 6ES7193-4DL00-0AA0

Add-on terminals for Terminal Modules

for SIMATIC ET 200S Compact

• SIMATIC DP, add-on terminals for

SIMATIC ET 200S and SIMATIC ET 200S

Compact, screw-type

6ES7193-4FL10-0AA0

• SIMATIC DP, add-on terminals for

SIMATIC ET 200S and

SIMATIC ET 200S Compact,

spring-loaded

Please order two units for 4-wire

connection.

The add-on terminals can also be

attached to TM-E/TM-P Terminal

Modules, provided at least 120 mm

(4.72 in) of the construction width attains

the same overall height as the Terminal

Module.

6ES7193-4FL00-0AA0

Interface Modules for PROFIBUS DP

Transmission rate up to 12 Mbit/s;

incl. termination module

•IM 151-1 Basic

Data volume 88 bytes each for inputs

and outputs;

up to 12 power, electronic and motor

starter modules can be connected

(except F modules), with RS 485

interface

6ES7151-1CA00-0AB0

•IM 151-1 Standard

Data volume 244 bytes each for inputs

and outputs;

up to 63 I/O modules can be

connected, with RS 485 interface

6ES7151-1AA05-0AB0

•IM 151-1 High Feature

As IM 151-1 Standard, but also for use

with isochronous I/O and F modules

6ES7151-1BA02-0AB0

•IM 151-1 FO

As IM 151-1 Standard,

but with 128 byte data volume

each for inputs and outputs;

with fiber-optic interface

6ES7151-1AB05-0AB0

•IM 151-7 CPU

With integrated PROFIBUS DP interface

(RS 485 interface);

96 Kbyte work memory

6ES7151-7AA21-0AB0

•IM 151-7 CPU FO

As IM 151-7 CPU,

but with fiber-optic interface,

48 Kbyte work memory

6ES7151-7AB00-0AB0

•IM 151-7 F-CPU

Integrated, fail-safe CPU 6ES7151-7FA21-0AB0

Master interface module

Expands the

IM 151-7 CPU/IM 151-7 F-CPU/

IM 151-8 PN DP CPU interface module

with a DP master interface;

up to one module per CPU

6ES7138-4HA00-0AB0

Interface Modules for PROFINET

Transmission rate up to 100 Mbit/s,

2 × bus connection via RJ45,

incl. termination module

•IM 151-3 PN Standard

Max. 63 I/O modules can be connected

(except F modules; reserve modules)

6ES7151-3AA23-0AB0

•IM 151-3 PN High Feature

As IM 151-3 PN Standard,

but F modules can be used

6ES7151-3BA23-0AB0

•IM 151-3 PN FO

As IM 151-3 PN High Feature,

but with 2 PROFINET fiber-optic

interfaces

6ES7151-3BB23-0AB0

•IM 151-3 PN High Speed

Max. 32 power modules and electronic

modules can be connected;

for the use of isochronous I/O

with cycle times of 250 µs minimum;

only for use with selected I/O modules

For further details, see Functions

6ES7151-3BA60-0AB0

•IM 151-8 PN/DP CPU

With integrated PROFINET IO interface

(3 RJ45 ports)

128 Kbyte work memory

6ES7151-8AB01-0AB0

•IM 151-8F PN/DP F-CPU

With integrated PROFINET IO interface

(3 RJ45 ports)

128 Kbyte work memory

6ES7151-8FB01-0AB0

Micro Memory Card (MMC)

• With IM 151-7 CPU,

essential for program back-up

• With IM 151-3 PN

essential for saving the device name

(64 KB)

• Required for firmware updates

(more than 2 MB)

-64 KB 6ES7953-8LF20-0AA0

-128 KB 6ES7953-8LG20-0AA0

-512 KB 6ES7953-8LJ30-0AA0

-4 MB 6ES7953-8LM20-0AA0

-8 MB 6ES7953-8LP20-0AA0

External EPROM programming device

For programming Micro Memory Cards

(MMC); connectable via USB interface

6ES7792-0AA00-0XA0

Description Order No.

SIMOTION I/O components

Distributed I/O

10/28 Siemens PM 21 · 2013

SIMATIC ET 200S

■

Selection and ordering data (continued)

Description Order No.

Power Modules

1 unit,

Width 15 mm (0.59 in)

•PM-E 24 V DC Standard

For electronic modules,

with diagnostics

6ES7138-4CA01-0AA0

•PM-E 24 V DC High Feature 1)

For electronic modules,

with diagnostics

6ES7138-4CA60-0AB0

•PM-E 24 ... 48 V DC

For electronic modules,

with diagnostics

6ES7138-4CA50-0AB0

•PM-E 24 ... 48 V DC, 24 ... 230 V AC

For electronic modules,

with diagnostics and fuse

6ES7138-4CB11-0AB0

Potential Distributor Module

for SIMATIC ET 200S

For preparing the load voltage on

additional terminals, 1 unit,

width 15 mm (0.59 in)

6ES7138-4FD00-0AA0

TM-P Terminal Modules

for Power Modules 2)

1 unit,

Width 15 mm (0.59 in)

• 2 × 3 terminals

With terminal access to AUX1,

AUX1 connected through to the left

- TM-P15S23-A1,

screw-type terminal 6ES7193-4CC20-0AA0

-TMP15C23-A1,

spring-loaded terminals 6ES7193-4CC30-0AA0

- TM-P15N23-A1,

FastConnect 6ES7193-4CC70-0AA0

• 2 × 3 terminals

With terminal access to AUX1,

AUX1 interrupted to the left

- TM-P15S23-A0,

screw-type terminal 6ES7193-4CD20-0AA0

- TM-P15C23-A0,

spring-loaded terminals 6ES7193-4CD30-0AA0

- TM-P15N23-A0,

FastConnect 6ES7193-4CD70-0AA0

• 2 × 2 terminals

Without terminal access to AUX1,

AUX1 connected through to the left

- TM-P15S22-01,

screw-type terminal 6ES7193-4CE00-0AA0

- TM-P15C22-01,

spring-loaded terminals 6ES7193-4CE10-0AA0

- TM-P15N22-01,

FastConnect 6ES7193-4CE60-0AA0

Description Order No.

Digital Electronic Modules

5 units,

(unless specified otherwise)

Width 15 mm (0.59 in)

• 2 DI, 24 V DC, Standard 6ES7131-4BB01-0AA0

• 4 DI, 24 V DC, Standard 6ES7131-4BD01-0AA0

• 8 DI, 24 V DC, Standard

(1 unit) 6ES7131-4BF00-0AA0

• 4 DI, 24 V DC, SOURCE INPUT,

active low inputs 6ES7131-4BD51-0AA0

• 8 DI, 24 V DC, SOURCE INPUT,

active low inputs

(1 unit)

6ES7131-4BF50-0AA0

• 4 DI, 24 V DC, NAMUR

(1 unit) 6ES7131-4RD02-0AB0

• 2 DI, 120 V AC 6ES7131-4EB00-0AB0

• 2 DI, 230 V AC 6ES7131-4FB00-0AB0

• With parameterizable input delay and

diagnostics

- 2 DI, 24 V DC, High Feature 3) 6ES7131-4BB01-0AB0

- 4 DI, 24 V DC, High Feature 3) 6ES7131-4BD01-0AB0

- 4 DI, 24 ... 48 V DC 1) 6ES7131-4CD02-0AB0

• 2 DO, 24 V DC/0.5 A, Standard 6ES7132-4BB01-0AA0

• 4 DO, 24 V DC/0.5 A, Standard 3) 6ES7132-4BD02-0AA0

• 8 DO, 24 V DC/0.5 A, Standard 3)

(1 unit) 6ES7132-4BF00-0AA0

• 4 DO, 24 V DC/0.5 A, current sinking 3) 6ES7132-4BD50-0AA0

• 8 DO, 24 V DC/0.5 A, current sinking 3)

(1 unit) 6ES7132-4BF50-0AA0

• 2 DO, 24 V DC/2 A, Standard 6ES7132-4BB31-0AA0

• 4 DO, 24 V DC/2 A, Standard 3) 6ES7132-4BD32-0AA0

• With diagnostics for short-circuit and

wire break, output of replacement value

- 2 DO, 24 V DC/0.5 A,

High Feature 1) 6ES7132-4BB01-0AB0

- 2 DO, 24 V DC/2 A,

High Feature 1) 6ES7132-4BB31-0AB0

• 2 DO, 24 ... 230 V AC/1 A,

output of substitute value 6ES7132-4FB01-0AB0

• 2 DO, 24 V DC ... 230 V AC/5 A,

relay, NO contact,

output of substitute value

6ES7132-4HB01-0AB0

• 2 DO, 24 V DC ... 230 V AC/5 A,

relay, changeover contact,

output of substitute value

6ES7132-4HB12-0AB0

• 2 DO, 24 V ... 48 V DC/5A

24V...230VDC/5A,

relay, changeover contact,

output of substitute value,

with manual operation (1 unit)

6ES7132-4HB50-0AB0

• 4 DO, 24 V DC/0.5A,

High Feature 3) 6ES7132-4BD00-0AB0

• 4 DO, 24 V DC/2A,

High Feature 3) 6ES7132-4BD30-0AB0

• 8 DO, 24 V DC/0.5A,

High Feature 3) 6ES7132-4BF00-0AB0

1) Can be used for all electronic and technology modules except

2 DI 120 V AC / 2 DI 230 V AC / 2 DO 120/230 V AC.

2) Consult corresponding TM-P/TM-E manual or SIMATIC ET 200

Configurator software for selection.

3) Can be used as isochronous I/O.

SIMOTION I/O components

Distributed I/O

10/29

Siemens PM 21 · 2013

SIMATIC ET 200S

■

Selection and ordering data (continued)

Description Order No.

Analog Electronic Modules

Width 15 mm (0.59 in)

•2 AI, U, Standard,

Cycle time 65 ms per channel,

± 5 V, ± 10 V, 1 to 5 V,

13 bit (+ sign)

6ES7134-4FB01-0AB0

•2 AI, U, High Feature 1),

Process and diagnostic alarm,

cycle time 0.5 ms (both channels),

± 5 V, ± 10 V, 1 ... 5 V,

15 bit (+ sign),

basic error limit ± 0.1 %

6ES7134-4LB02-0AB0

•2 AI, U, High Speed 1),

Process and diagnostic alarm,

cycle time 100 µs (both channels),

± 2.5 V, ± 5 V, ± 10 V, 1 ... 5 V,

15 bit (+ sign)

6ES7134-4FB52-0AB0

•2 AI, I, 2-wire, Standard,

Cycle time 65 ms per channel,

4 ... 20 mA, 13 bit

6ES7134-4GB01-0AB0

•4 AI, I, 2-wire, Standard,

Cycle time 40 ms (both channels),

4 ... 20 mA, 13 bit

6ES7134-4GD00-0AB0

•2 AI, I, 4-wire, standard,

Cycle time 65 ms per channel,

4 ... 20 mA, ± 20 mA,

13 bit (+ sign)

6ES7134-4GB11-0AB0

•2 AI, I, 2/4-wire, High Feature 1),

Cycle time 0.5 ms (both channels),

4 ... 20 mA, ± 20 mA,

15 bit (+ sign),

basic error limit ± 0.05%

6ES7134-4MB02-0AB0

•2 AI, I, 2-wire, High Speed 1),

Process and diagnostic alarm,

cycle time 100 µs (both channels),

0/4 ... 20 mA, 15 bit

6ES7134-4GB52-0AB0

•2 AI, I, 4-wire, High Speed 1),

Process and diagnostic alarm,

cycle time 100 µs (both channels),

0/4 ... 20 mA, ± 20 mA,

15 bit (+ sign)

6ES7134-4GB62-0AB0

•2 AI, TC, Standard,

Cycle time 65 ms per channel,

characteristic linearization for

thermoelements of types:

B, E, J, K, L, N, R, S, T,

voltage measuring: ± 80 mV,

15 bit (+ sign)

6ES7134-4JB01-0AB0

•2 AI, TC, High Feature,

With internal temperature

compensation,

Cycle time 80 ms per channel,

characteristic linearization for

thermoelements of types:

B, C, E, J, K, L, N, R, S, T,

voltage measuring: ± 80 mV,

15 bit (+ sign) (special TM required)

6ES7134-4NB01-0AB0

•2 AI, RTD, Standard,

Cycle time 130 ms per channel,

Pt 100, Ni 100,

(standard, air-conditioned)

Resistance:

150 Ω, 300 Ω and 600 Ω,

14 ... 15 bit (+ sign)

6ES7134-4JB51-0AB0

•2 AI, RTD, High Feature

As RTD standard,

but with additional functions such as

higher accuracy,

additional measuring ranges,

internal compensation of cable

resistances

6ES7134-4NB51-0AB0

•2 AO, U, Standard,

Cycle time < 1.5 ms (both channels),

± 10 V, 13 bit (+ sign),

1 ... 5 V, 12 bit

6ES7135-4FB01-0AB0

•2 AO, U, High Feature 1),

Cycle time < 0.5 ms (both channels),

± 5 V, ± 10 V, 15 bit + sign,

1 ... 5 V, 15 bit,

basic error limit ± 0.05 %

6ES7135-4LB02-0AB0

•2 AO, U, High Speed 1),

Cycle time 100 µs (both channels),

± 5 V, 14 bit + sign,

± 10 V, 15 bit + sign,

1 ... 5 V, 14 bit

6ES7135-4FB52-0AB0

•2 AO, I, Standard,

Cycle time < 1.5 ms (both channels),

± 20 mA, 13 bit (+ sign),

4 ... 20 mA, 13 bit

6ES7135-4GB01-0AB0

•2 AO, I, High Feature 1),

Cycle time < 0.5 ms (both channels),

± 20 mA, 15 bit + sign,

4 ... 20 mA, 15 bit,

basic error limit ± 0.05 %

6ES7135-4MB02-0AB0

•2 AO, I, High Speed 1),

Cycle time 100 µs (both channels),

±20mA, 15bit (+sign),

4 ... 20 mA, 15 bit

6ES7135-4GB52-0AB0

Description Order No.

1) Can be used as isochronous I/O.

SIMOTION I/O components

Distributed I/O

10/30 Siemens PM 21 · 2013

SIMATIC ET 200S

■

Selection and ordering data (continued)

Description Order No.

Technology modules

•SSI module, 1 channel 1)

For connecting SSI absolute encoders,

with latch input and comparison value,

width 15 mm (0.59 in)

6ES7138-4DB03-0AB0

•Pulse generator

2 PULSES, 2 channels

Pulse generator and Timer Module for

controlling actuators, valves, heating

elements, etc., optionally over PWM

modulation, pulse trains or time-limited

permanent signals at the 24 V output,

width 15 mm (0.59 in)

6ES7138-4DD01-0AB0

•Counter module 1 COUNT,

24 V/100 kHz, 1 channel 1)

Connection of incremental encoders,

direction encoders and initiators;

with DI, DO and comparison value;

operating modes: counting, measuring,

position detection;

width 15 mm (0.59 in)

6ES7138-4DA04-0AB0

•Counter module 1 COUNT,

5 V/500 kHz, 1 channel 1)

Connection of RS 422 incremental

encoders;

with DI, DO and comparison value;

operating modes: counting, measuring,

position detection;

width 30 mm (1.18 in)

6ES7138-4DE02-0AB0

•Sensor module 4 IQ-Sense

For connecting up to 4 IQ-Sense

sensors,

with SF-LED, width 15 mm (0.59 in),

5 units

6ES7138-4GA00-0AB0

•1 SI interface module

Serial interface (1 channel):

RS 232C, RS 422, RS 485,

protocols: ASCII, 3964 (R),

width 15 mm (0.59 in)

The standard functions required to

use the module in connection with

SIMOTION are included in the

SCOUT Function Library.

6ES7138-4DF01-0AB0

•1 STEP stepper module, 1 channel

For controlled positioning of stepper

motor axes, interface to RS 422 and 2 DI,

width 15 mm (0.59 in)

6ES7138-4DC01-0AB0

•IO-Link module

4SI IO-Link, 4 point-to-point interfaces,

IO-Link master

width 15 mm (0.59 in)

6ES7138-4GA50-0AB0

•1 POS U Positioning module,

1 channel

For controlled positioning with digital

outputs for 5 V/24 V incremental

encoder, SSI encoder,

width 30 mm (1.18 in)

6ES7138-4DL00-0AB0

•SIWAREX CS

Electronic weighing system for scales

in SIMATIC ET 200S for applications

with and without verified calibration,

with EU type approval 2000 d,

width 30 mm (1.18 in)

7MH4910-0AA01

•SIWAREX CF

Transmitter for connecting DMS

sensors, e.g. for force and torque

measurement,

width 30 mm (1.18 in)

7MH4920-0AA01

You can find more information on

SIWAREX weighing systems at:

www.siemens.com/siwarex

Description Order No.

1) Can be used as isochronous I/O.

SIMOTION I/O components

Distributed I/O

10/31

Siemens PM 21 · 2013

SIMATIC ET 200S

■

Selection and ordering data (continued)

Description Order No.

Reserve Module

for reserving space

in unused slots

• Width 15 mm (0.59 in), 5 units 6ES7138-4AA01-0AA0

• Width 30 mm (0.59 in), 1 unit 6ES7138-4AA11-0AA0

TM-E Terminal Modules for

Electronic Modules 1)

Width 30 mm (1.18 in)

for 1 COUNT 5 V/500 kHz, 1 POS U and

SIWAREX CS/CF

•4×4terminals

Without terminal access to AUX1,

AUX1 connected through to the left

- TM-E30S44-01,

screw-type terminals 6ES7193-4CG20-0AA0

- TM-E30C44-01,

spring-loaded terminals 6ES7193-4CG30-0AA0

•4×6terminals

With terminal access to AUX1,

AUX1 connected through to the left

- TM-E30S46-A1,

screw-type terminals 6ES7193-4CF40-0AA0

- TM-E30C46-A1,

spring-loaded terminals 6ES7193-4CF50-0AA0

TM-E Terminal Modules for

Electronic Modules 1)

1unit,

width 15 mm (0.59 in),

for 2 AI TC High Feature

• Terminal Modules for internal

temperature compensation

for 2 AI TC High Feature

-TM-E15S24-AT,

screw-type terminals 6ES7193-4CL20-0AA0

-TM-E15C24-AT,

spring-loaded terminals 6ES7193-4CL30-0AA0

Description Order No.

TM-E Terminal Modules for

Electronics Modules 1)

Width 15 mm (0.59 mm), 5 units

•2×4terminals

With terminal access to AUX1,

AUX1 connected through to the left

- TM-E15S24-A1,

screw-type terminals 6ES7193-4CA20-0AA0

- TM-E15C24-A1,

spring-loaded terminals 6ES7193-4CA30-0AA0

- TM-E15N24-A1,

FastConnect 6ES7193-4CA70-0AA0

•2×6terminals

With terminal access to AUX1,

AUX1 connected through to the left

- TM-E15S26-A1,

screw-type terminals 6ES7193-4CA40-0AA0

- TM-E15C26-A1,

spring-loaded terminals 6ES7193-4CA50-0AA0

- TM-E15N26-A1,

FastConnect 6ES7193-4CA80-0AA0

•2×3terminals

Without terminal access to AUX1,

AUX1 connected through to the left

- TM-E15S23-01,

screw-type terminals 6ES7193-4CB00-0AA0

- TM-E15C23-01,

spring-loaded terminals 6ES7193-4CB10-0AA0

- TM-E15N23-01,

FastConnect 6ES7193-4CB60-0AA0

•2×4terminals

Without terminal access to AUX1,

AUX1 connected through to the left

- TM-E15S24-01,

screw-type terminals 6ES7193-4CB20-0AA0

- TM-E15C24-01,

spring-loaded terminals 6ES7193-4CB30-0AA0

- TM-E15N24-01,

FastConnect 6ES7193-4CB70-0AA0

1) Consult corresponding TM-P/TM-E manual or SIMATIC ET 200

Configurator software for selection.

SIMOTION I/O components

Distributed I/O

10/32 Siemens PM 21 · 2013

SIMATIC ET 200S

■

Selection and ordering data (continued)

Description Order No.

Standard motor starter

With diagnostics, electromechanical,

fuseless,

expandable with Brake Control Module

• DS1-x direct-on-line starters 3RK1301- 77B00-0AA2

• RS1-x reversing starters 3RK1301- 77B00-1AA2

< 0.06 kW 1); 0.14 ... 0.20 A 2) 0B

0.06 kW 1); 0.18 ... 0.25 A 2) 0C

0.09 kW 1); 0.22 ... 0.32 A 2) 0D

0.10 kW 1); 0.28 ... 0.40 A 2) 0E

0.12 kW 1); 0.35 ... 0.50 A 2) 0F

0.18 kW 1); 0.45 ... 0.63 A 2) 0G

0.21 kW 1); 0.55 ... 0.80 A 2) 0H

0.25 kW 1); 0.70 ... 1.0 A 2) 0J

0.37 kW 1); 0.9 ... 1.25 A 2) 0K

0.55 kW 1); 1.1 ... 1.6 A 2) 1A

0.75 kW 1); 1.4 ... 2.0 A 2) 1B

0.90 kW 1); 1.8 ... 2.5 A 2) 1C

1.1 kW 1); 2.2 ... 3.2 A 2) 1D

1.5 kW 1); 2.8 ... 4.0 A 2) 1E

1.9 kW 1); 3.5 ... 5.0 A 2) 1F

2.2 kW 1); 4.5 ... 6.3 A 2) 1G

3.0 kW 1); 5.5 ... 8.0 A 2) 1H

4.0 kW 1); 7.0 ... 10 A 2) 1J

5.5 kW 1); 9.0 ... 12 A 2) 1K

High Feature motor starters

With diagnostics, fuseless, expandable

with Brake Control Module

• DS1e-x direct-on-line starters 3RK1301- 77B10-0AB4

• RS1e-x reversing starters 3RK1301- 77 B10-1AB4

• DSS1e-x soft starters 3RK1301- 77B20-0AB4

0.3 ... 3.0 A 2) 0A

2.4 ... 8.0 A 2) 0B

2.4 ... 16.0 A 2) 0C

Description Order No.

Power Module for motor starter

•PM-D Power Module

for 24 V DC with diagnostics 3RK1903-0BA00

•Terminal Module for

motor starter power module PM-D

TM-P15-S27-01

3RK1903-0AA00

Accessories for standard motor starters

Control kit

• For manually operating the contacts

during start-up and servicing

(one set contains five control kits)

3RK1903-0CA00

• For direct control of contactor

(manual control) 24 V DC 3RK1903-0CG00

Terminal Modules for direct-on-line

starter

•TM-DS45-S32

With supply cable connection for

power bus; incl. three caps for

terminating the power bus

3RK1903-0AB00

•TM-DS45-S31

Without supply cable connection for

power bus

3RK1903-0AB10

Terminal Modules for reversing starter

•TM-RS90-S32

With supply cable connection for

power bus: incl. three caps for

terminating the power bus

3RK1903-0AC00

•TM-RS90-S31

Without supply cable connection for

power bus

3RK1903-0AC10

Accessories for DS1-x, RS1-x motor starters

DM-V15 Distance Module 3RK1903-0CD00

• For direct-on-line starters with

high temperature and current load;

width 15 mm (0.59 in)

Terminal block PE/N

•M45-PEN-F,

width 45 mm (1.77 in),

incl. 2 caps; in combination with

TM-DS45-S32

or TM-RS90-S32

3RK1903-2AA00

•M45-PEN-S,

width 45 mm (1.77 in),

in combination with TM-DS45-S31

or TM-RS90-S31

3RK1903-2AA10

1) Motor output for three-phase standard motor at 400 V.

2) Setting range of the overcurrent release.

SIMOTION I/O components

Distributed I/O

10/33

Siemens PM 21 · 2013

SIMATIC ET 200S

■

Selection and ordering data (continued)

Description Order No.

Accessories for standard and High Feature motor starters

Jumper module

• M30-PEN, 30 mm (1.18 in) wide;

for bridging a

30 mm (1.18 in) module

3RK1903-0AJ00

• M15-PEN, 15 mm (0.59 in) wide;

for bridging a

15 mm (0.59 in) module

3RK1903-0AH00

• M30-L123, 30 mm (1.18 in) wide;

jumper module;

for bridging a

30 mm (1.18 in) module

3RK1903-0AF00

• M15-L123, 15 mm (0.59 in) wide;

bridge module;

for bridging a

15 mm (0.59 in) module

3RK1903-0AE00

Brake Control Module

For motors with a mechanical brake

•xB1

24 V DC/4 A 3RK1903-0CB00

•xB2

500 V DC/0.7 A 3RK1903-0CC00

•xB3

24 V DC/4 A, 2 DI 24 V DC

Local control with diagnostics:

with 2 inputs with quick-stop function

3RK1903-0CE00

•xB4

500 V DC/0.7 A, 2 DI 24 V DC

Local control with diagnostics:

with 2 inputs with quick-stop function

3RK1903-0CF00

Terminal Modules

• TM-xB15 S24-01 for xB1 or xB2 3RK1903-0AG00

• TM-xB215 S24-01 for xB3 … xB4 3RK1903-0AG01

Description Order No.

Accessories for High Feature motor starters

Control Module 2DI, 24 V DC COM

Digital input module with two inputs

• For local motor start functions

for mounting to the front of a motor

starter

3RK1903-0CH10

• For local motor start functions or manual

operation

for mounting to the front of a motor

starter

3RK1903-0CH20

LOGO! PC signal cable

For connecting the High Feature motor

starter with Switch ES interface to a PC

6ED1057-1AA00-0BA0

Terminal Modules

•TM-DS65-S32

For direct-on-line starters DS1e-x,

DSS1e-x, with supply cable connection

for power bus;

incl. three caps for terminating the

power bus

3RK1903-0AK00

•TM-DS65-S31

For direct-on-line DS1e-x, DSS1e-x,

without supply cable connection for

power bus

3RK1903-0AK10

•TM-RS130-S32

For RS1e-x reversing starter,

with supply cable connection for

power bus;

incl. three caps for terminating

power bus

3RK1903-0AL00

•TM-RS130-S31

For RS1e-x reversing starter,

without supply cable connection for

power bus

3RK1903-0AL10

M65-PEN-F Infeed Module

65 mm (2.56 in) wide, incl. two caps,

in combination with TM-DS65-S32/

TM-RS130-S32

3RK1903-2AC00

M65-PEN-S Connection Module

65 mm (2.56 in) wide, in combination with

TM-DS65-S31/TM-RS130-S31

3RK1903-2AC10

SIMOTION I/O components

Distributed I/O

10/34 Siemens PM 21 · 2013

SIMATIC ET 200S

■

Selection and ordering data (continued)

Description Order No.

Local Safety Modules

• Safety Modules

- PM-D F1, with diagnostics,

for EMERGENCY-STOP applications,

monitored startup

3RK1903-1BA00

- PM-D F2, with diagnostics,

for protective door monitoring,

automatic startup

3RK1903-1BB00

- PM-D F3, with diagnostics,

for expansion of PM-D F1/2 for an

additional voltage group,

time-delayed 0 ... 15 s

3RK1903-1BD00

- PM-D F4, with diagnostics,

for expansion of PM-D F1/2 for an

additional voltage group

3RK1 903-1BC00

- PM-D F5 with diagnostics for

expansion of PM-D F1 to F4 with

four isolated enabling circuits,

contact multiplier

3RK1 903-1BE00

- PM-X, with diagnostics;

connection module for connecting

a safety group and an external in-

coming supply contactor or external

safety circuit

3RK1903-1CB00

• Terminal Modules for

Safety Modules

- TM-PF30 S47-B1,

for PM-D F1/2 with incoming supply

U1/U2 and sensor connection

3RK1903-1AA00

- TM-PF30 S47-B0,

for PM-D F1/2 with sensor connection 3RK1903-1AA10

- TM-PF30 S47-C1,

for PM-D F 3/4 with incoming supply

U1/U2 and IN+/IN- control input

3RK1903-1AC00

- TM-PF30 S47-C0,

for PM-D F3/4 with incoming

supply U2

3RK1903-1AC10

- TM-PF30 S47-D0,

for PM-D F5 3RK1903-1AD10

•TM-X15 S27-01

for connection module PM-X

3RK1903-1AB00

•F kit 1

Failsafe equipment for

DS1-x standard motor starter 1)

3RK1903-1CA00

•F kit 2

Failsafe equipment for

RS1-x standard motor starter 1)

3RK1903-1CA01

SIMATIC ET 200S accessories

Shield connection element

Pluggable on TM-E and TM-P, 5 units 6ES7193-4GA00-0AA0

Shield terminal

for 3 × 10 mm (0.39 in) busbar, 5 units 6ES7193-4GB00-0AA0

Grounding terminal

for cable cross-sections up to 25 mm2,

1unit

8WA2 868

Busbar 3 × 10 mm × 1000 mm 8WA2 842

SIMATIC, DIN rail

• 35 mm (1.38 in),

length 483 mm (19.02 in) for

19" cabinets

6ES5710-8MA11

• 35 mm (1.38 in),

length 530 mm (20.87 in) for

600 mm (23.62 in) cabinets

6ES5710-8MA21

• 35 mm (1.38 in),

length 830 mm (32.68 in) for

900 mm (35.43 in) cabinets

6ES5710-8MA31

• 35 mm (1.38 in), length 2 m (6.56 ft) 6ES5710-8MA41

Labeling sheets DIN A4

10 units

Each sheet contains 60 labeling strips

for I/O Modules and 20 labeling strips

for Interface Modules

•petrol 6ES7193-4BH00-0AA0

•red 6ES7193-4BD00-0AA0

• yellow 6ES7193-4BB00-0AA0

• light beige 6ES7193-4BA00-0AA0

Accessories for coding

Color coding plates

For TM-P, TM-E, 200 units

• white 6ES7193-4LA20-0AA0

• yellow 6ES7193-4LB20-0AA0

• yellow/green 6ES7193-4LC20-0AA0

•red 6ES7193-4LD20-0AA0

•blue 6ES7193-4LF20-0AA0

•brown 6ES7193-4LG20-0AA0

• turquoise 6ES7193-4LH20-0AA0

Labels, inscribed

200 units

• For slot numbering

(1 to 20) 10 × 8WA8861-0AB

• For slot numbering

(1 to 40) 5 × 8WA8861-0AC

• For slot numbering

(1 to 64) 1 ×,

(1 to 68) 2 ×

8WA8861-0DA

Labels, blank

100 units

• For slot numbering 8WA8848-2AY

Description Order No.

1) The function of the failsafe kit is already integrated into High Feature motor

starters.

SIMOTION I/O components

Distributed I/O

10/35

Siemens PM 21 · 2013

SIMATIC ET 200eco

■

Overview

• Compact, cost-effective I/O devices for processing digital

signals

• Designed for use without a control cabinet with IP65/67

degree of protection with flexible and fast connections

• Comprises of a basic module and various connection blocks

for application-specific implementations

- ECOFAST: 2 × RS 485 hybrid fieldbus connection with

identification plug for setting the PROFIBUS address

- M12: 2 × M12 and 2 × 7/8" with 2 rotary coding switches for

assigning the PROFIBUS address

• Connection block contains T-functionality for PROFIBUS DP

and power supply so that during commissioning and service,

the modules can be disconnected and reconnected to the

PROFIBUS without interruption

• Module variants:

8 DI, 16 DI, 8 DI/8 DO (1.3 A), 8 DI/8 DO (2.0 A), 8 DO (2.0 A),

16 DO (0.5 A)

• Module diagnostics for load voltage and encoder short-circuit

• Transmission rates up to 12 Mbit/s

■

Application

SIMATIC ET 200eco is the compact block I/O with IP65/67

degree of protection and is distinguished by simple handling

and installation.

SIMATIC ET 200eco allows the user to cost-effectively process

digital signals over PROFIBUS DP.

Thanks to its high degree of protection and ruggedness, it is

particularly suitable for use close to the machine.

The flexible connection blocks can be used to connect

PROFIBUS DP over M12 or a standardized hybrid fieldbus

connection (ECOFAST).

The compact block l/O SIMATIC ET 200eco can be used as an

expansion for applications with high degree of protection in

addition to the SIMATIC ET 200pro modular I/O family.

■

Design

ET 200eco comprises a basic module and a connection block.

For applications in many different industries, a compact, per-

fectly matched module spectrum of digital I/Os is available:

With the variable and flexible connection blocks, PROFIBUS DP

can be connected over 2 × M12, 2 × 7/8" or 2 × hybrid fieldbus

interfaces (ECOFAST).

The T-functionality for PROFIBUS DP and power supply are inte-

grated in the connection block so that machines can be oper-

ated without interruption during commissioning and service of

bus lines and without having to use supplementary components.

The pin assignment for the actuators and sensors are modeled

on the IP65/67 standardization trends.

The PROFIBUS address can be set and seen from the outside or

plugged. The proven identification connector is used for ECO-

FAST interfaces. For M12 7/8" interfaces, two rotary coding

switches which can be seen from the outside are used to set the

PROFIBUS address.

■

Function

Communication is handled completely over PROFIBUS DP.

Diagnostic functions are available for checking the mode of

operation of the ET 200eco:

• BF (bus fault)

• SF (system fault)

• Encoder and power supply

The diagnostic data is indicated by LEDs on the module and can

be evaluated by software on the PG/PC or by SIMOTION.

Short-circuits of the encoder supply as well as missing load

voltages are diagnosed for each module.

The connection block can be removed from and screwed back

to the basic module while the power is on so that PROFIBUS

and the power supply remain active for the application all the

time.

Number of

channels Type of connection

8 DI 8 individual channels over 8 × M12 screw connections

for 8 digital input signals

16 DI 16 channels over 8 × M12 screw connections with

double assignment for 16 digital input signals

8DO 8 individual channels over 8 × M12 screw connections

for 8 digital output signals (2 A)

16 DO 16 channels over 8 × M12 screw connections with

double assignment for 16 digital output signals (0.5 A)

8 DI/8 DO

(2 variants) 16 channels over 8 × M12 screw connections with

double assignment for 8 digital input and 8 digital

output signals (2 A or 1.3 A)

SIMOTION I/O components

Distributed I/O

10/36 Siemens PM 21 · 2013

SIMATIC ET 200eco PN

■

Overview

SIMATIC ET 200eco PN is a compact block I/O with a PROFINET

connection with IP65/IP67 degree of protection for cabinet-free

installation directly at the machine.

Due to the fully potted, zinc die-cast housing,

SIMATIC ET 200eco PN is extremely rugged and resistant to

vibration, dust, oil and humidity.

SIMATIC ET 200eco PN can be flexibly expanded via PROFINET

and supports star and line topologies within the same system.

■

Benefits

7Compact block I/O for processing digital, analog and IO-Link

signals for connecting to the PROFINET bus system

7Cabinet-free installation with IP65/IP67 degree of protection

with M12 connection system

7Extremely rugged and strong metal enclosure and fully potted

7Compact module in two types of enclosures

7100 Mbit/s data transmission rate

7LLDP proximity detection without PG and fast startup

(boot up within approx. 0.5 s)

7Channel-specific diagnostics

■

Application

The SIMATIC ET 200eco PN is ideal for applications directly at

the machine in which space is at a premium. Due to its rugged-

ness and high degree of protection, it is implemented in a wide

range of applications demanding a high degree of protection

alongside the modular SIMATIC ET 200pro I/O family.

■

Design

SIMATIC ET 200eco PN comprises a basic module and a

connection block.

For applications in many different industries, a compact, per-

fectly matched module spectrum of digital I/Os is available:

2 × M12 screwed connections with an integrated 2-port switch

are used for connection to PROFINET IO, so line topologies can

be configured.

The supply and load voltage connections are also implemented

as 2 × M12 screwed connections. This makes supply voltage

loop-through extremely easy. Using an optional terminal block,

the supply voltage can be connected via insulating piercing

terminals.

■

Function

The communication is performed exclusively via PROFINET IO.

Diagnostic functions are available for checking the mode of

operation of ET 200eco PN:

• BF (bus fault)

• SF (system fault)

• Encoder and power supply

The diagnostic data are indicated by LEDs on the module and

can be evaluated by software on the PG/PC or by SIMOTION.

Short-circuits of the encoder supply as well as missing load

voltages are diagnosed for each module.

Number of

channels Type of connection

8 DI 8 channels over 4 × M12 screw connections with

double assignment for 8 digital input signals

8 DI 8 individual channels over 8 × M12 screw

connections for 8 digital input signals

16 DI 16 channels over 8 × M12 screw connections with

double assignment for 16 digital input signals

8 DO 8 channels over 4 × M12 screw connections with

double assignment for 8 digital input signals (1.3 A)

8 DO 8 individual channels over 8 × M12 screw

connections for 8 digital output signals (1.3 A)

8 DO 8 individual channels over 8 × M12 screw

connections for 8 digital output signals (2 A)

16 DO 16 channels over 8 × M12 screw connections with

double assignment for 16 digital output signals (1.3 A)

8 DI/DO 8 individual channels over 8 × M12 screwed

connections for 8 digital input/output signals (1.3 A)

8AI 8 individual channels over 8 × M12 screwed

connections for 4 analog input signals (U/I) and

4 RTD/TC signals

4 AO 4 individual channels over 4 × M12 screwed

connections for 4 analog output signals (U/I)

IO-Link master 16 channels over 8 × M12 screwed connections with

double assignment for 4 IO-Link channels, 8 digital

input signals and 4 digital output signals (1.3 A)

SIMOTION I/O components

Distributed I/O

10/37

Siemens PM 21 · 2013

SIMATIC ET 200pro

■

Overview

SIMATIC ET 200pro is the modular I/O system with high IP65/67

degree of protection for local, cabinet-free applications.

ET 200pro distinguishes itself through a small frame size and an

innovative installation concept. The ET 200pro station can be

easily adapted to the requirements of the corresponding auto-

mation task with respect to the connection method, required I/O

and fieldbus connection. New features such as the integrated

PROFIsafe safety technology, the PROFINET interface and the

ability to hotswap modules permit it to be used for a wide range

of applications.

■

Benefits

7Distributed I/O system with high IP65/67 degree of protection

7Flexible fieldbus connection through interface modules for

PROFIBUS DP and PROFINET

7Modular design with up to 16 expansion modules for flexible

adaptation to the automation task

7Comprehensive module range

- Digital and Analog Input and Output Modules

- Power Module for simple implementation of 24 V load groups

- Motor starter

- PROFIsafe module

7Simple, quick assembly and high vibration strength of the

module carrier

7Integration of safety technology with PROFIsafe

7High plant availability through permanent wiring and the

ability to replace Electronic Modules during operation

(hot swapping)

7Low space requirements through small footprint (I/O module

e.g. 130 mm (5.12 in) high and 45 mm (1.77 in) wide)

7Graduated diagnostics concept, optionally with module-

specific or channel-specific diagnosis of faults of connected

sensors or actuators

7Simple configuration through ET 200pro configurator software

■

Design

SIMATIC ET 200pro comprises of an interface module which

contains the fieldbus interface and is expandable with a

comprehensive module range.

The system bus and 24 V power wiring are configured with a

busbar system which is integrated in the modules. Wiring using

connecting cables is therefore not necessary.

Quick assembly and high vibration strength is achieved through

a rack which is available in different options and is an integral

part of the system. The modules are first latched onto this rack

and then secured with a few screws to achieve a good fit and

very high vibration strength.

SIMATIC ET 200pro is usually designed in two or three parts.

Interface and Power Modules as well as Digital and Analog

Expansion Modules comprise:

• one bus connector which constitutes the backplane bus of

the system,

• one Electronics Module or Interface Module and

• one Connection Module.

The separation of module and bus/power connection technol-

ogy, which has already been used for the ET 200eco, is now also

used for the Digital and Analog Expansion Modules of the

ET 200pro. For the interface module, this allows use of the T-

functionality for the bus and 24 V power supply, and for the Ex-

pansion Modules it permits pre-wiring of sensor/actuator con-

nections. This permanent wiring allows exactly one Electronics

Module to be hotswapped in the event of a fault without having

to switch off the whole station. This ensures very high machine

and plant availability. When an electronics component is re-

placed, the whole I/O wiring can remain on the Connection Mod-

ule and does not have to be marked or removed.

Power Modules can be added to the system if selective load

groups have to be configured within a station or if a 24 V back-

feed is required. The power modules interrupt the busbar inte-

grated into the system for the 24 V load supply and feed the

power back into the system at the point of connection.

• Up to 16 expansion modules can be used

(max. station width: 1 meter (3.28 ft))

• Build-as-you-go busbars for 24 V power and communication

within the station

• Flexible connection system

- Connection for PROFIBUS DP and 24 V power supply over

direct coupling (M20 cable gland), ECOFAST or M12 / 7/8"

- Connection for PROFINET and 24 V power supply over

M12 / 7/8"

- Sensors and actuators for 8-channel I/O modules can be

optionally connected to 4 × M12 or 8 × M12.

SIMOTION I/O components

Distributed I/O

10/38 Siemens PM 21 · 2013

SINUMERIK Analog Drive Interface for

4 Axes ADI 4 • SIMATIC Interface Module IM 174

■

Overview

The ADI 4 Analog Drive Interface for 4 Axes and the IM 174

Interface Module can be used to connect drives with analog

±10 V setpoint interfaces.

The IM 174 Interface Module also allows stepper drives with

pulse/direction interfaces to be connected.

■

Application

Up to four drives with analog setpoint interfaces can be oper-

ated on each of these modules. The isochronous PROFIBUS DP

is used for coupling to SIMOTION.

The following can be connected:

• Electrical servo drives with analog ±10 V setpoint interface

• Hydraulic drives with analog ±10 V setpoint interface

(e.g. for servo hydraulic valve)

• Stepper drives with pulse/direction interface

(IM 174 Interface Module only)

ADI 4 and IM 174 can also be used for external encoders;

at least one axis must be created.

Mixed operation of the 4 drive interfaces is possible.

Connection of an IM 174 to a SIMOTION D module via PROFIBUS DP

■

Design

Interfaces

Display and diagnostics

• Onboard status display on 4 diagnostics LEDs

Drive interfaces

• 4 analog outputs ±10 V for connecting drives with analog

setpoint interface

• For IM 174 only: 4 interfaces for controlling stepper drives with

or without encoder connection

• 4 relay contacts for drive enable axes 1 to 4

Encoder interfaces

• 4 encoder inputs for position acquisition. Each input can be

connected either to an RS422 incremental encoder or to an

SSI absolute encoder.

Encoders with SINE/COSINE signals (1 Vpp) can be con-

nected using external pulse shaping electronics (EXE) which

convert the signals to the 5 V TTL level.

Communication

• PROFIBUS DP interface with Motion Control functionality

(isochronous, max. 12 Mbit/s)

Digital inputs and outputs

• 10 DI, 24 V DC (e.g. for BERO, probe and "Drive Ready"

signal)

• 8 DO, 24 V DC, 0.5 A (e.g. for drive enable)

Additional interfaces

• 2 relay contacts for "Ready" signal

An external power source (24 V DC) is required for supplying the

module and the digital outputs.

All connections are at the front panel.

■

Function

The following functions are available in connection with

SIMOTION:

• Speed-controlled axes

• Position-controlled axes

• External encoder for SIMOTION

(at least one axis must be configured)

• Homing over BERO or

• Homing over zero marks

(non-distance-coded zero marks/reference marks)

• Measuring over Sensor 1 and Sensor 2

(one edge, rising or falling)

■

Integration

The modules are not certified PROFIBUS DP standard slaves

and can therefore only be used in combination with the

controllers intended for this purpose (e.g. SIMOTION C/P/D).

The modules do not support acyclic communication and the I/O

interfaces can only be used in combination with the encoder or

drive functions.

ADI 4 and IM 174 must be operated on an isochronous

PROFIBUS DP.

Supported PROFIBUS DP cycles:

• ADI 4: 1 ms and above (isochronous, max. 12 Mbit/s)

• IM 174: 1.5 ms and above (isochronous, max. 12 Mbit/s)

Analog or

stepper

drives

G_PM10_EN_00168d

Absolute or

incremental

encoder

SIMOTION D4x5-2 +

SINAMICS S120

IM 174

wyvmpi|z

DRIVE-CLiQ

SIMOTION I/O components

Distributed I/O

10/39

Siemens PM 21 · 2013

SINUMERIK Analog Drive Interface for

4 Axes ADI 4 • SIMATIC Interface Module IM 174

■

Technical specifications

■

Selection and ordering data

ADI 4 IM 174

Input voltage 24 V DC 24 V DC

Power consumption, max. 30 W typ. 12 W

Inputs/outputs Isolated Isolated

Relay contacts Max. current carrying capacity:

2 A for 150 V DC or 125 V AC

Switching cycles:

- for 24VDC, 1A: 1×10

- for 24V DC, 2A: 1×10

Max. current carrying capacity:

1 A for 30 V DC

Switching cycles:

- for 30 V DC, 1 A: at least. 5 × 105

Encoder inputs

Can be used alternatively for incremental encoders

(symmetrical) or absolute encoders (SSI)

4 4

Drive interfaces 4 4

• Analog drives

(over analog output ± 10 V) Yes Yes

• Hydraulic drives

(hydraulic valve over analog output, ± 10 V) Yes Yes

• Stepper drives

(over pulse/direction interface) No Yes

Communication

• PROFIBUS DP interfaces 1

(isochronous, max. 12 Mbit/s) 1

(isochronous, max. 12 Mbit/s)

• Minimum PROFIBUS DP cycle 1 ms 1.5 ms

Degree of protection to EN 60529 IP20 IP20

Condensation Not permissible Not permissible

Permissible ambient temperature

•Storage -20 ... +55 °C (-4 ... +131 °F) -40 ... +70 °C (-40 ... +158 °F)

• Transportation -40 ... +70 °C (-40 ... +158 °F) -40 ... +70 °C (-40 ... +158 °F)

• Operation 0 ... +55 °C (+32 ... +131 °F) 0 ... +60 °C (+32 ... +140 °F)

Design Housing in booksize format;

fixed by screwing SIMATIC S7-300 design

(no backplane bus, connected over

PROFIBUS)

Weight, approx. 1.5 kg (3.31 lb) 1 kg (2.21 lb)

Dimensions (W × H × D) 48.5×325×154.4mm

(1.91 × 12.80 × 6.08 in) 160×125×118 mm

(6.30 × 4.92 × 4.65 in)

Description Order No.

SINUMERIK Analog Drive Interface

for 4 Axes ADI 4 6FC5211-0BA01-0AA4

SIMATIC Interface Module IM 174

(Interface Module for 4 Axes) 6ES7174-0AA10-0AA0

Accessories

Front connector with screw-type

contacts

40-pole, 100 units

6ES7392-1AM00-1AB0

Front connector with spring-loaded

contacts

40-pole, 100 units

6ES7392-1BM01-1AB0

Front connector FastConnect

40-pole, 1 unit 6ES7392-1CM00-0AA0

SIMOTION I/O components

Distributed I/O

10/40 Siemens PM 21 · 2013

AS-Interface

■

Overview

An important characteristic of the AS-Interface technology is the

use of an unshielded two-core cable for data transmission and

distribution of auxiliary power to the sensors and actuators. The

special AS-Interface power supply unit supports the AS-Inter-

face transmission method. The mechanically coded and thus

polarized AS-Interface cable is used for wiring. The AS-Interface

Modules are connected to the AS-Interface cable with insulation

piercing contacts.

The ASIsafe concept supports direct integration of safety-

related components, such as EMERGENCY-STOP switches, pro-

tective door switches or safety light arrays, in the AS-Interface

network.

■

Application

Process or field communication

Complex control cable wiring in the control cabinet and control

cabinets full of terminal blocks can be replaced with AS-Inter-

face. Thanks to a specially developed ribbon cable (easily rec-

ognized by its yellow color) and insulation piercing technology,

the AS-Interface cable can be connected anywhere. This con-

cept results in enormous flexibility and significant cost savings.

AS-Interface is an open standard (EN 50295 / IEC 62026-2).

Leading manufacturers of actuators and sensors worldwide sup-

port AS-Interface.

AS-Interface is used where individual actuators/sensors are

spatially distributed over a machine (e.g. in a bottling plant or

production line). AS-Interface replaces complex cable har-

nesses as well as connects binary and analog actuators and

sensors such as proximity switches, measuring sensors, valves

or indicator lights with a SIMOTION control. In practice this

means: Installation runs smoothly because data and power are

transported together over a single line. No special expertise is

required for installation and commissioning. Furthermore,

through simple cable laying, the freely configurable network

topology as well as the special design of the cable, you not only

significantly reduce the risk of errors, but also service and

maintenance costs.

Safety included

The ASIsafe concept supports direct integration of safety-

related components, such as EMERGENCY-STOP switches, pro-

tective door switches or safety light arrays, in the AS-Interface

network. These are fully compatible with the other AS-Interface

components (masters, slaves, power supply units, repeaters,

etc.) and are operated together on the yellow AS-Interface

cable.

The signals of the safety sensors are evaluated by a safety mon-

itor. The safety monitor not only monitors the switching signals of

the safety sensors, but also continuously checks whether data

transmission is functioning properly. Depending on the variant,

the safety monitor has one or two release circuits which are used

to put the machine or plant into a safe state. Each release circuit

has two switching contacts to fulfill Safety Category 4 in accor-

dance with EN 954-1 or SIL 3 to IEC 61508. Sensors and monitor

can be connected at any point in the AS-Interface network. It is

also possible to use several safety monitors on a single network.

A fail-safe control or special master is not necessary. The master

treats safety slaves in the same way as all other slaves. The

safety data is evaluated in the safety monitor. In this way, existing

AS-Interface networks can also be expanded.

SIMOTION I/O components

Distributed I/O

10/41

Siemens PM 21 · 2013

AS-Interface

■

Design

AS-Interface network topology

AS-Interface is a single master system. A communications

processor (CP 343-2 P), which controls the process or field

communication as a master, is used for central application with

SIMOTION C or distributed applications over SIMATIC ET 200M.

The DP/AS-Interface Link 20E and DP/AS-Interface Link

Advanced are used to establish a direct connection between

ASInterface and PROFIBUS DP.

IE/AS-Interface Link PN IO can also be used to connect

AS-Interface to PROFINET.

The gateways enable AS-Interface to be used as a subnet for

PROFIBUS DP or PROFINET on SIMOTION.

Up to 62 slaves can be operated on the AS-Interface. SIMOTION

supports all digital and analog AS-Interface slaves (with Analog

Profile 7.3 and higher).

The maximum extension of an AS-Interface network is 200 m

(656 ft) (with AS-i extension plug) or 100 m (328 ft) (without

AS-i extension plug). This length can be increased with the help

of repeaters.

The following AS-Interface masters are available for SIMOTION:

• DP/AS-Interface Link 20E and DP/AS-Interface Link

Advanced connect PROFIBUS DP to AS-Interface.

• The IE/AS-Interface Link PN IO connects PROFINET IO

with AS-Interface.

• The CP 343-2 P is the AS-Interface master for central

application with SIMOTION C or for the SIMATIC ET 200M

distributed I/O system.

DP/AS-Interface Link Advanced and IE/AS-Interface Link PN IO

support particularly easy diagnostics and commissioning on site

over the integrated pixel graphics display and control keys or

over the web interface using a standard browser.

The modules operate in compliance with the latest AS-i specifi-

cation 3.0 and therefore also support the operation of digital A/B

slaves with 4 inputs and 4 outputs as well as analog A/B slaves.

If the optional C-PLUG is used, modules can be replaced with-

out the need to set PROFIBUS or Ethernet addresses.

The SCOUT command library contains standard functions for

easy handling of the AS-Interface components, e.g.

• for operating the command interface of the AS-Interface

master

• for reading out the diagnostic information from the ASIsafe

safety monitor

SIMOTION I/O components

Distributed I/O

10/42 Siemens PM 21 · 2013

AS-Interface

■

Design (continued)

AS-Interface master

Repeater

IE/AS link PN IO

LOGO!

Control

panel

G_PM10_EN_00203b

Compact starter

in degree of

protection IP65

Digital/analog

I/O module

Max. AS-Interface cable length

per segment:

100 m (300 ft) without extension plug

200 m (600 ft) with extension plug

Max. AS-Interface cable length

per segment:

100 m (300 ft) without extension plug

200 m (600 ft) with extension plug

Signal evaluation

Safety

monitor

Safe slave

with emergency

stop

AS-Interface

distributor

(without

AS-Interface chip)

AS-Interface

distributor

(without

AS-Interface chip)

AS-Interface

extension plug

(for segment length

up to 200 m (600 ft))

AS-Interface

power supply

AS-Interface

power supply

24 V DC

power supply

PROFIBUS

AS-Interface

PROFINET

SIMOTION C/P/D

SIMATIC ET 200

SIMOTION I/O components

Distributed I/O

10/43

Siemens PM 21 · 2013

AS-Interface

■

Selection and ordering data

■

More information

For further information about AS-Interface slaves, ASIsafe and

ordering data, see Catalog IK PI and the Industry Mall under

Automation technology/Industrial Communication/AS-Interface

and on the Internet at:

www.siemens.com/as-interface

DP/AS-Interface manuals are available as PDF files at:

http://support.automation.siemens.com/WW/view/com/47052644

Description Order No.

DP/AS-Interface Link 20E

Router between the PROFIBUS DP

and AS-Interface with IP20 degree of

protection

6GK1415-2AA10

IE/AS-Interface LINK PN IO

Router between Industrial Ethernet and

AS-Interface with master profiles M3, M4

in accordance with extended AS-I

specification V3.0 for integration in

PROFINET IO; IP20 degree of protection

• Single master with display 6GK1411-2AB10

• Dual master with display 6GK1411-2AB20

DP/AS-Interface Link Advanced

Router between PROFIBUS DP and

AS-Interface; master profiles M3 and M4,

extended AS-Interface specification

V3.0; IP20 degree of protection;

manual on CD-ROM

• Single master with display

• Dual master with display

6GK1415-2BA10

6GK1415-2BA20

C-PLUG

Swap medium for easy replacement

of the devices in the event of a fault;

for storing configuration data or

engineering data and user data

6GK1900-0AB00

RS 485 bus connector with angled

cable outlet (35°)

With screw-type terminals,

without PG interface

6ES7972-0BA42-0XA0

IE FC RJ45 Plug 90

RJ45 plug-in connector for Industrial

Ethernet with a rugged metal housing

and integrated insulation displacement

contacts for connecting Industrial

Ethernet FC installation cables;

with 90° cable outlet

• 1 pack = 1 unit

• 1 pack = 10 units

• 1 pack = 50 units

6GK1901-1BB20-2AA0

6GK1901-1BB20-2AB0

6GK1901-1BB20-2AE0

CP 343-2 P communications

processor

For connecting SIMOTION C and

SIMATIC ET 200M to the AS-Interface;

without front connector

6GK7343-2AH11-0XA0

Front connector for CP 343-2 P

• With screw contacts

- 20-pole, 1 unit 6ES7392-1AJ00-0AA0

- 20-pole, 100 units 6ES7392-1AJ00-1AB0

• With spring-loaded contacts

- 20-pole, 1 unit 6ES7392-1BJ00-0AA0

- 20-pole, 100 units 6ES7392-1BJ00-1AB0

• With FastConnect

- 20-pole, 1 unit 6ES7392-1CJ00-0AA0

SIMOTION I/O components

SINAMICS drive I/O

10/44 Siemens PM 21 · 2013

Summary

■

Overview

SINAMICS drive I/O

With the modules of the SINAMICS drive I/O, the SIMOTION

Motion Control system as well as the SINAMICS S120 drive sys-

tem can be expanded with digital and analog inputs and outputs

as well as encoder interfaces. The following modules are avail-

able:

• TB30 Terminal Board that is plugged into the option slot of the

SINAMICS CU320-2/SIMOTION D4x5-2 Control Unit. It pro-

vides additional digital and analog inputs and outputs.

• TM Terminal Modules that are connected to SINAMICS/

SIMOTION over DRIVE-CLiQ. The Terminal Modules expand

SINAMICS/SIMOTION with additional digital and analog

inputs/outputs.

• SMC/SME Sensor Modules that are connected to the

SINAMICS/SIMOTION Control Unit over DRIVE-CLiQ. The

SMC Sensor Modules (for control cabinet installation) and

SME (IP67 version for installation outside the control cabinet)

are required if motors are to be connected without DRIVE-CLiQ

and/or if other encoders must be evaluated in addition to the

motor encoder.

Connection to SINAMICS/SIMOTION

The modules of the SINAMICS drive I/O are connected to

SINAMICS/SIMOTION over DRIVE-CLiQ. The only exception

is the TB30 Terminal Board, which is plugged directly into the

SINAMICS or SIMOTION Control Unit as a plug-in card.

DRIVE-CLiQ is used to connect SINAMICS Control Units and

SIMOTION controllers to other drive-based components, such

as Line Modules, Motor Modules, motors and encoders. Set-

points and actual values, control commands, status messages

and electronic nameplate data for the connected components

are transferred via DRIVE-CLiQ.

Benefits

• DRIVE-CLiQ significantly simplifies commissioning and diag-

nostics since all connected components are identified with the

help of an electronic nameplate.

• The standardized cables and connectors reduce the variety of

different parts and cut storage costs.

■

Application

Terminal Board TB30

Application

Expansion of the Control Unit with additional digital and analog

inputs/outputs.

Main features

• Slide-in module for the option slot of Control Units

SIMOTION D4x5-2 and SINAMICS S120 CU320-2

• 4 DI, 4 DO, 2 AI, 2 AO

TM15/TM17 High Feature Terminal Modules

Application

Implementation of measuring inputs and cam outputs as well as

drive-related digital inputs and outputs with short signal delay

times (TM17 High Feature can only be used in conjunction with

SIMOTION)

Main features of TM15

24 isolated, bidirectional DI/DO with measuring input and cam

functionality (measuring input and cam functionality is available

only in connection with SIMOTION)

Main features of TM17 High Feature

16 non-isolated, bidirectional DI/DO with measuring input and

cam functionality for the highest requirements with respect to

resolution, accuracy and short input delay times. In addition,

enabling inputs can be parameterized.

TM31 Terminal Module

Application

Expansion of digital and analog inputs and outputs over

DRIVE-CLiQ

Main features

• 8 DI, 4 bidirectional DI/DO, 2 relay outputs

•2AI, 2AO

• 1 temperature sensor input (KTY84-130 or PTC)

TM41 Terminal Module

Application

The TM41 Terminal Module is used for incremental encoder

emulation. A master value (incremental signal) can be made

available to a second control unit as an external encoder signal

via the TM 41.

Main features

• 4 DI, 4 DI/O

•1AI

• 1 interface for TTL incremental encoder emulation (RS422)

TM54F Terminal Module

Application

The TM54F provides safe digital inputs and outputs for

controlling the Safety Integrated functions of SINAMICS.

Main features

• 4 fail-safe digital outputs (F-DO)

• 10 fail-safe digital inputs (F-DI)

DRIVE-CLiQ

Terminal Modules

Option Boards

Sensor

Module

Synchronous motor

without DRIVE-CLiQ

interface

Synchronous motors

with DRIVE-CLiQ

interface

MOTION-CONNECT power cable

MOTION-CONNECT signal cable

G_PM10_EN_00113c

From left to right:

• SIMOTION D4x5-2

• Basic Line,

Smart Line or

Active Line Module

• Double Motor Module

• Single Motor Module

DRIVE-CLiQ

DRIVE-CLiQ MOTION-CONNECT

SIMOTION I/O components

SINAMICS drive I/O

10/45

Siemens PM 21 · 2013

Summary

■

Application (continued)

Terminal Modules TM120/TM150

Application

Temperature sensors can be evaluated using Terminal Modules

TM120/TM150.

Main features of TM120

Terminal Module TM120 can be used to evaluate 4 temperature

sensors (KTY84-130 or PTC). The temperature sensor inputs are

safely electrically isolated from the evaluation electronics in

Terminal Module TM120 and are suitable for temperature moni-

toring of special motors, e.g. 1FN linear motors and 1FW6 built-

in torque motors.

Main features of TM150

Terminal Module TM150 can be used to evaluate temperature

sensors (KTY, PT100, PT1000, PTC and normally closed bimetal

contacts). Apart from motor temperature, other temperatures

from the process can be acquired. Temperature sensor evalua-

tion can be performed using a 2, 3 or 4-wire system. 12 temper-

ature sensors can be evaluated with 2-wire evaluation, and

6 temperature sensors can be evaluated with 3 and 4-wire

evaluation.

Sensor Modules SMC10/SMC20/SMC30

Application

Motor encoder and temperature evaluation of motors without

DRIVE-CLiQ or when additional encoders are used (for

example, machine encoders)

Main features of SMC10

One encoder connection for evaluating the resolver signals

(two-pole and multi-pole). In addition, the motor temperature can

be monitored with a KTY84-130 or PTC thermistor.

Main features of SMC20

One encoder connection for evaluating

• Incremental encoders (sin/cos 1 Vpp)

• Absolute encoders (EnDat 2.1) and

• SSI encoders with incremental signals (sin/cos 1 Vpp)

In addition, the motor temperature can be monitored with a

KTY84-130 or PTC thermistor.

Main features of SMC30

One encoder connection for evaluating

• Incremental encoders (TTL/HTL)

• SSI encoders with and without incremental signals (TTL/HTL)

In addition, the motor temperature can be monitored with a

KTY84-130 or PTC thermistor.

SME20/SME25 Sensor Modules External

Application

The SME20/SME25 Sensor Modules External are encoder eval-

uation units for machine encoders (direct measuring systems).

The devices are designed with IP67 degree of protection. This

means that the units can be installed outside the control cabinet

near the machine encoder.

Main features of SME20

One encoder connection for evaluating incremental encoders

(sin/cos 1 Vpp) without rotor position track (C and D track).

Main features of SME25

An encoder connection for evaluating absolute encoders

(EnDat) and SSI absolute encoders with incremental signals

(sin/cos 1 Vpp).

SME120/SME125 Sensor Modules External

The SME120/SME125 Sensor Modules External are encoder

evaluation units with IP67 degree of protection, especially suit-

able for use in linear and torque motor applications in which the

temperature signals must be reliably electrically isolated from

the encoder signals and the 24 V supply. They can be installed

close to the motor systems and encoders in the machine.

Main features of SME120

One encoder connection for evaluating incremental encoders

(sin/cos 1 Vpp).

Main features of SME125

One encoder connection for evaluating absolute encoders

(EnDat).

With SME120 and SME125, the motor temperature can also be

detected using KTY84-130 or PTC thermistors.

DRIVE-CLiQ Hub Module DMC20/DME20

Application

The DMC20/DME20 can be used to increase the number of

DRIVE-CLiQ interfaces.

Main features

DRIVE-CLiQ hub with 6 DRIVE-CLiQ sockets for connecting

5 additional DRIVE-CLiQ nodes.

• DMC20 is the hub for mounting in the control cabinet

• DME20 is the hub for mounting outside the control cabinet

(IP67 degree of protection).

■

Integration

Integration of the SINAMICS drive I/O in a SIMOTION system

Two main options are available for SIMOTION for integrating the

SINAMICS drive I/O via DRIVE-CLiQ:

• System configuration with integrated drives:

In this configuration, the drive I/O are connected directly to

SIMOTION D or to the SIMOTION CX32-2 Controller Extension

(not shown in the figure).

• System configuration with external drives:

In this configuration, the drive I/O are connected to a

SINAMICS CU310-2 or CU320-2 Control Unit, which is con-

nected to SIMOTION C, P or D (see figure) via PROFIBUS DP

or via PROFINET IO.

Coupling of TM15 and TM31 with SIMOTION D4x5-2

PROFINET

DRIVE-CLiQ

SINAMICS S120 with

SIMOTION D4x5-2

G_PM10_EN_00118c

TM15, TM31

SIMOTION I/O components

SINAMICS drive I/O

10/46 Siemens PM 21 · 2013

Summary

■

Integration (continued)

Coupling of TM15 and TM31 with SIMOTION C, P over CU320-2

Use of the TM41 as incremental encoder emulation

The TM41 Terminal Module supplies TTL signals for incremental

encoder emulation, e.g. for a higher-level control. The encoder

interface (incremental encoder emulation) can be linked to an

encoder signal from the Control Unit, e.g. incremental encoder

sin/cos, by parameter assignment.

Alternatively, as far as SIMOTION is concerned, TM41 can be

handled in the same manner as an axis. This allows you to return

the axis position (a master value) as an encoder signal to a

second controller, for example.

TM41 Terminal Module as incremental encoder emulation

■

More information

Further information

• on the TM15 and TM17 High Feature Terminal Modules can be

found on the next pages.

• on the remaining components of the SINAMICS drive I/O can

be found in the chapter "SINAMICS S120".

TM15, TM31

SIMOTION C SIMOTION P

SIMATIC ET 200

HMI

PROFINET

kyp}lTjsx

SINAMICS S120

with CU320

G_PM10_EN_00119b

TM41

SIMOTION D4x5-2 SIMOTION D4x5-2

TTL

(RS422)

'5,9(&/L4

PROFINET

G_PM10_EN_00169b

Third-party controller,

existing system, …

SIMOTION I/O components

SINAMICS drive I/O

10/47

Siemens PM 21 · 2013

TM15 and TM17 High Feature Terminal Modules

■

Overview

Terminal Modules TM15 (left) and TM17 High Feature (right)

TM15 and TM17 High Feature Terminal Modules provide the

measuring inputs and output cams for the Motion Control

System SIMOTION. Furthermore, the Terminal Modules provide

drive-related digital inputs and outputs with short signal delay

times.

The "Measuring input", "Cam" and "Cam Track" technology

objects support easy integration in SIMOTION.

■

Application

The main field of application for the TM15 and TM17 High

Feature Terminal Modules are applications which in addition to

digital inputs and output cams require very accurate measuring

inputs and output cams. Several measuring inputs or output

cams can be assigned to a real axis, virtual axis, or external

encoder.

Examples for precise sensing with binary signals:

•Edge detection

• Quality monitoring (e.g. product is good/bad)

• Product tracing (e.g. product is available/not available)

• Detection of print marks

• Print mark correction

• Tool monitoring (e.g. for presses)

• Machine status monitoring (e.g. for broken threads in the

textile industry)

Examples for precise output of binary signals

• Position-dependent switching of actuators

- Camera trigger signal (quality assurance)

- Control of an air nozzle for blowing away cut-offs

- Controlling a nozzle for applying glue

• Product extraction from production line

• Implementation of line Motion Control systems

• Output of pulse patterns

■

Design

Interfaces

Display and diagnostics

• The status of the TM15 and TM17 High Feature Terminal

Modules is indicated via a multi-color LED.

• The logical status of a channel is indicated with the

corresponding green status LED.

Interfaces for I/O

• TM15: 24 DI/DO, parameterizable channel-by-channel

• TM17 High Feature: 16 DI/DO, parameterizable channel-

by-channel

Communication

• 2 DRIVE-CLiQ sockets

Power supply

• Connection for the electronic power supply over the 24 V DC

infeed connector

Installation

The signal cable shield is connected to the TM15 and TM17

High Feature Terminal Modules with a shield connection

terminal, e.g. type SK8 by Phoenix Contact or type KLBÜ CO 1

by Weidmüller.

The TM15 and TM17 High Feature Terminal Modules are

snapped onto a standard mounting rail according to EN 50022

(35 mm × 15 mm / 7.5 mm (1.38 in × 0.59 in / 0.30 in)).

SIMOTION I/O components

SINAMICS drive I/O

10/48 Siemens PM 21 · 2013

TM15 and TM17 High Feature Terminal Modules

■

Function

Each of the 24 DI/DO (TM15) or 16 DI/DO (TM17 High Feature)

can be parameterized channel-by-channel as:

• Digital input (DI) or digital output (DO)

• Measuring input

• Output cam

Each channel can also be inverted, as required.

Parameterization is performed with the SIMOTION SCOUT

engineering software.

Parameterization of the TM17 High Feature Terminal Module

The differences between the TM15 and TM17 High Feature

Terminal Modules depend on the field of application. TM17 High

Feature has fewer I/O channels than TM15, but more function-

ality.

TM17 High Feature is distinguished by especially high resolution

and accuracy as well as a parameterizable input filter and

enabling inputs.

Parameterized enable inputs can enable measuring inputs or

output cams (gate function).

• Level-controlled enable for measuring inputs

• Level or edge-controlled enable for output cams

TM17 High Feature also supports cyclic measuring of up to

2 edges per servo/interpolator cycle.

Due to their high accuracy, the DI/DO channels of the TM17

High Feature are non-isolated.

■

Integration

The TM15 and TM17 High Feature Terminal Modules can be

connected directly to SIMOTION D via DRIVE-CLiQ. Alterna-

tively, TM15 and TM17 High Feature can be connected to a

SINAMICS CU310-2 or CU320-2 Control Unit, which is con-

nected with SIMOTION C/P/D over PROFIBUS or PROFINET.

The number of Terminal Modules which can be used depends

on the number of axes configured with SIMOTION as well as the

functionality configured for TM15 and TM17 High Feature.

For further information, refer to the Commissioning Manual of the

TM15 and TM17 High Feature Terminal Modules.

Note:

TM17 High Feature can only be used on a SINAMICS CU310-2

or CU320-2 Control Unit in conjunction with the SIMOTION

motion control system.

SIMOTION I/O components

SINAMICS drive I/O

10/49

Siemens PM 21 · 2013

TM15 and TM17 High Feature Terminal Modules

■

Technical specifications

■

Selection and ordering data

■

More information

For further information about accessories that can be used

and about the DRIVE-CLiQ cables, see the section

"MOTION-CONNECT connection systems".

For the Terminal Modules TM15 and TM17 High Feature, the

same DRIVE-CLiQ cables for the Terminal Module TM31 can be

used.

General data TM15 Terminal Module TM17 High Feature Terminal Module

Power supply (rated value) 24 V DC 24 V DC

Current consumption (no-load), max. 0.15 A 0.2 A

Power loss, max. 3 W 4 W

Conductor cross-section, max. 2.5 mm² 2.5 mm²

Number of DRIVE-CLiQ interfaces 2 2

I/O

• Digital inputs/outputs 24 DI/DO, parameterizable

channel-by-channel 16 DI/DO, parameterizable

channel-by-channel

• Isolation Yes, in groups of 8 No

• Connections Plug-in screw-type terminals Plug-in screw-type terminals

• Conductor cross-section, max. 1.5 mm² 1.5 mm²

Digital inputs Each channel can be parameterized as:

Digital input/measuring input Each channel can be parameterized as:

Digital input/measuring input/enabling input

(max. 6 units)

Input voltage (rated value) 24 V DC 24 V DC

• For "0" signal min. -30 V -30 V

max. 5V 5V

• For "1" signal min. 15 V 15 V

max. 30 V 30 V

Input delay

at rated value of input voltage 0 → 1 / 1 → 0:

typical 50 µs/100 µs 1 µs/125 µs ± 15 %

(parameterizable in 2 steps)

Probe function

• Reproducibility ± 125 µs ≤ ± 1 µs

• Resolution 125 µs 1µs

Digital outputs Each channel can be parameterized as:

Digital output/output cam

The logical status of the digital outputs can

be read back for diagnostic purposes

Each channel can be parameterized as:

Digital output/output cam

The logical status of the digital outputs can

be read back for diagnostic purposes

Output voltage (rated value) 24 V DC 24 V DC

• Sustained-short-circuit-proof Yes Yes

• Output current per channel 0.5 A 0.5 A

Total current of outputs (per group)

• Up to 60 °C (140 °F), max.

• Up to 50 °C (122 °F), max.

• Up to 40 °C (104 °F), max.

Output delay (resistive load)

At "0" to "1" transition

• Typical 50 µs 50 µs

•Max. 100 µs 100 µs

At "1" to "0" transition

• Typical 150 µs 75 µs

•Max. 225 µs 150 µs

Cam function

• Reproducibility ± 125 µs ≤ ± 10 µs

• Resolution 125 µs 1µs

Weight, approx. 0.86 kg (1.90 lb) 0.86 kg (1.90 lb)

Dimensions (W × H × D) 50 × 150 × 111 mm

(1.97 x 5.91 x 4.37 in) 50 × 150 × 111 mm

(1.97 x 5.91 x 4.37 in)

Approvals, according to UL and cULus UL and cULus

Description Order No.

TM15 Terminal Module

24 DI/DO; 24 V/0.5 A DC

(without DRIVE-CLiQ cable)

6SL3055-0AA00-3FA0

TM17 High Feature Terminal Module

16 DI/DO; 24 V DC/0.5 A

(without DRIVE-CLiQ cable)

6SL3055-0AA00-3HA0

SIMOTION I/O components

Other I/O modules

10/50 Siemens PM 21 · 2013

SIPLUS extreme

■

Overview

SIPLUS extreme is the product family with hardened/specially

designed components based on standard products (e.g.

SIMATIC S7, ET 200, MICROMASTER, POSMO A). SIPLUS

permits distributed use of automation components, even under

demanding environmental conditions.

• Ambient temperature range from -40/-25 °C (-40/-13 °F) to

+60/+70 °C (+140/+158 °F)

• Condensation, increased humidity, increased degree of

protection (dust, water)

• Extreme atmospheric exposure, e.g. toxic atmospheres

• Increased mechanical load, increased noise immunity

• Voltage ranges deviating from the standard

• Sector-specific solutions

■

More information

For further information on SIPLUS, see:

www.siemens.com/siplus

■

Overview

SIMATIC RFID systems control and optimize the material flow.

They identify reliably, quickly and economically, are unaffected

by contamination and store data directly on the product.

The data exchange between the tag (mobile data memory) and

the reader (write/read device) is fully automatic and contactless

by means of radio frequencies (RF) and does not require a direct

line of sight.

SIMATIC RFID systems are available for different fields of appli-

cation, e.g. for smart labels (ultra-slim data memory) for logis-

tics, rugged tags for production lines or "long-range" tags for

locating and localization.

For user-friendly, standardized data exchange between the

SIMOTION system and the standard profile RFID systems

(PIB = Proxy Ident Block), function blocks (FB) are available

in the SCOUT command library. This standard profile is, for

example, supported by the SIMATIC RFID system ASM 456,

which is connected to SIMOTION over PROFIBUS DP.

■

More information

For further information on SIMATIC RFID systems, see:

www.siemens.com/simatic-sensors/rf

SIMATIC RFID systems

SIMOTION I/O components

Other I/O modules

10/51

Siemens PM 21 · 2013

SIWAREX Weighing systems

■

Overview

Visual inspection and recognition of products in manufacturing

is becoming more important because the demands on quality

and production speed are increasing. The advantages:

• Increased productivity

• Reliable, automatic visual inspection saves time and costs

• Optimization of the material flow

• Reduced machine standstill times

The intelligent SIMATIC MV420, MV440, VS 120 and VS 130

vision sensors have been developed especially for application-

specific image processing. Thanks to their user-friendly opera-

tion, no special image processing knowledge is required since

the intelligent vision sensors are trained rather than pro-

grammed.

■

More information

For further information on Machine Vision, see:

www.siemens.com/simatic-sensors/vs

■

Overview

Wherever forces or weights have to be measured in automation

and process engineering today, modern weighing systems are

involved in monitoring and controlling the different production

sequences.

They are used in simple applications for monitoring forces,

detecting fill levels of containers and even in complex portioning

tasks such as filling containers with liquid and bagging solid

material.

In the case of the SIWAREX FTA Weighing module in

SIMATIC S7-300 design, the function block (FB) is an integral

component of the SCOUT command library. SIWAREX FTA is

therefore the optimum solution for applications that can be

calibrated such as filling systems, loading stations, bagging

stations, rotary packers or inspection stations.

Apart from SIWAREX FTA, the SIMATIC S7-300 module

SIWAREX U as well as the ET 200S modules SIWAREX CS and

SIWAREX FTC are available for simple applications such as load

and force measurements for SIMOTION.

■

More information

For further information on SIWAREX Weighing systems, see:

www.siemens.com/siwarex

SIMATIC Machine Vision

SIMOTION I/O components

Other I/O modules

10/52 Siemens PM 21 · 2013

Other I/O modules / Notes on use

■

Overview

The PROFIBUS DP and the PROFINET IO fieldbuses are power-

ful, open and rugged bus systems for fast, cyclic data exchange

between field devices. The openness of PROFIBUS DP or

PROFINET IO permits connection of standard components from

other manufacturers.

In addition to the I/O modules approved for SIMOTION, all certi-

fied standard slaves or PROFINET IO Devices can, in principle,

be connected to SIMOTION if they support PROFIBUS DP with:

• Cyclic data traffic (DP-V0) and, possibly,

• Acyclic data traffic (DP-V1) or

• Isochronous data traffic (DP-V2)

and PROFINET IO

• Real-time communication (RT) or

• Isochronous Real-time Communication (IRT)

These modules are integrated via the GSD file or GSDML file of

the respective device manufacturer. Please note that in individ-

ual cases further boundary conditions must be fulfilled in order

to integrate standard slaves or PROFINET IO Devices into

SIMOTION. Thus, "driver modules" that permit or simplify a

linking, for example, in the form of function blocks, are required

for some modules.

■

More information

For further information about industrial communication and

field devices, see Catalog IK PI and the Industry Mall under

Automation technology/Industrial Communication and on the

Internet at:

www.siemens.com/simatic-net

A list of all the I/O modules that can currently be used with

SIMOTION (centralized, distributed PROFIBUS/PROFINET,

DRIVE-CLiQ) is available under the following link:

http://support.automation.siemens.com/WW/view/en/11886029

■

Overview

Function blocks for I/O modules are available as an integral

component of the SCOUT command library. The function blocks

are easily copied into the application program by means of drag

& drop. Sample programs are also provided in SIMOTION

Utilities & Applications which demonstrate integration of the

function blocks. SIMOTION Utilities & Applications are included

in the scope of supply of SIMOTION SCOUT.

Function blocks are available in the SCOUT command library for

the following I/O modules:

• SIMODRIVE POSMO A, intelligent positioning motor

• FM 350-1, single-channel Counter Module

• FM 350-2, 8-channel Counter Module

• FM 352, cam controller

• CP 340, Communication Module

• CP 341, Communication Module

• SIWAREX FTA, Weighing Module

• ET 200S, 1SI serial Interface Module (3964R, ASCII)

• ET 200S, frequency converter

• ASM 456, RFID system

• AS-Interface master (function block for operation of the

command interface)

• ASIsafe safety monitor (with one or two enabling circuits)

Function blocks for I/O modules

Siemens PM 21 · 2013

11/2 Overview

11/3 Introduction

11/4 Mobile Panels

11/4 SIMATIC Mobile Panel 177

SIMATIC Mobile Panel 277

11/5 Touch Panels / Operator Panels

11/5 SIMATIC TP 177B /

SIMATIC TP 177B Widescreen /

SIMATIC OP 177B

11/6 SIMATIC TP 277 / SIMATIC OP 277

11/7 Multi Panels

11/7 SIMATIC MP 177 / SIMATIC MP 277

11/8 SIMATIC MP 377

11/9 Panel PCs

11/9 SIMATIC HMI IPC277D

11/10 SIMATIC HMI IPC477C

11/12 SIMATIC HMI IPC577C

11/14 SIMATIC HMI IPC677C

11/16 SIMATIC WinCC flexible ES

engineering software

11/17 SIMATIC WinCC flexible RT

visualization software

SIMOTION HMI devices

Overview

11/2 Siemens PM 21 · 2013

Designation Description Page

Mobile devices

SIMATIC Mobile Panel 177 Mobile HMI devices for direct operator control of the plant and

machine from any point

5.7" STN display with touch screen, 256 colors,

14 configurable function keys

11/4

SIMATIC Mobile Panel 277 Mobile HMI devices for direct operator control of the plant and

machine from any point

7.5"/10" TFT display with touch screen, 65536 colors,

18 configurable function keys

11/4

Touch Panels / Operator Panels

SIMATIC TP 177B

SIMATIC TP 177B Widescreen

SIMATIC OP 177B

Touch Panel/Operator Panel with comprehensive functionality for

demanding machine visualization

Universal entry-level device with 4.3" color TFT Widescreen or 5.7"

STN display

11/5

SIMATIC TP 277

SIMATIC OP 277 Touch Panel/Operator Panel with comprehensive functionality for

demanding machine visualization

Comprehensive functionality

5.7" TFT display

11/6

Multi Panels

SIMATIC MP 177 Multi Panels combine the rugged construction of Operator Panels

with the flexibility of PCs

5.7"/10.4" TFT display and touch screen

11/7

SIMATIC MP 277 Multi Panels combine the rugged construction of Operator Panels

with the flexibility of PCs

7.5"/10.4" TFT display

11/7

SIMATIC MP 377 Multi Panels combine the rugged construction of Operator Panels

with the flexibility of PCs

12.1"/15.1"/19" TFT display

11/8

Panel PCs

SIMATIC HMI IPC277D For implementing simple visualization and control tasks 11/9

SIMATIC HMI IPC477C Industry-standard PC platform for PC-based automation

Ultra-compact, rugged and maintenance-free 11/10

SIMATIC HMI IPC577C Industry-standard PC platform for PC-based automation

Full PC-openness 11/12

SIMATIC HMI IPC677C Industry-standard PC platform for PC-based automation

High performance, flexibility and safety 11/14

Engineering / visualization software SIMATIC WinCC flexible

SIMATIC WinCC flexible ES Engineering tool for the configuration

of SIMATIC HMI devices, of the SIMATIC Panel PCs as well as

PLC-based visualization system WinCC flexible RT

11/16

SIMATIC WinCC flexible RT PC-based visualization software

for single user systems directly at the machine 11/17

SIMOTION HMI devices

Introduction

11/3

Siemens PM 21 · 2013

■

Overview

HMI devices

A finely graded range of HMI devices is available for local oper-

ator control and monitoring.

Mobile Panels

The portable operator panels facilitate operator control and

monitoring at the actual scene of the event with direct access

and visual contact to the process. They offer simple and secure

hot-swapping and can be used flexibly on individual machines

or with entire systems.

Graphic panels of the 177/277 series

The graphic panels of the 177/277 series with full graphic dis-

play support the realistic presentation of process sequences

(with 177B upwards, also in color). Either as Touch Panels (TP)

with touch-sensitive display or as Operator Panels (OP) with

membrane keyboard.

Multi Panels of the 177/277/377 series

The Multi Panels of the 177/277/377 series in variants with touch

screen or membrane keyboard can be used like the Panels for

operator control and monitoring. Multi Panels (MPs), however,

also support the installation of additional applications.

Rugged and compact for use at machine level

With IP65/NEMA 4 degree of protection at the front, high EMC

and extreme vibration resistance, the SIMATIC operator panels

are ideally suited for use at the machine level in harsh industrial

environments. Thanks to their compact design with a shallow

mounting depth, the stationary operator panels can be fitted

anywhere, even where only restricted space is available.

The extremely rugged and shock-proof enclosure with degree of

protection IP65 makes the Mobile Panels especially suitable for

industrial applications. Their low weight and ergonomic design

means that they are user-friendly and easy to operate.

One configuration software for everything

SIMATIC WinCC flexible is the tool for the universal configuration

of all SIMATIC Panels as well as PC-based systems with the

visualization software WinCC flexible Runtime.

Graded variants are available for every task. The software per-

mits simple and efficient configuration. Programming experi-

ence is not required.

Once created, configurations can be reused within the family.

Innovative operator control and monitoring

The Mobile Panels, panels and Multi Panels of the 177, 277 and

370 series, which are based on the Windows CE operating sys-

tem, allow innovative operator control and monitoring combined

with ruggedness, stability and simplicity. Standard hardware

and software interfaces provide more flexibility and openness to

the Office world via the MMC/PC/CF card, USB, Ethernet,

PROFIBUS DP, Visual Basic scripts or customer-specific ActiveX

controls.

HMI software

With the SIMATIC WinCC flexible and SIMATIC WinCC product

families, SIMATIC HMI offers visualization and configuration

software for the entire spectrum.

SIMATIC WinCC flexible

is the consistent further development of the SIMATIC HMI

software products. WinCC flexible offers a significant boost in

configuring efficiency and new innovative automation concepts

for machine-level applications. For process-oriented plant

and mechanical engineering as well as series production of

machines, SIMATIC WinCC flexible 2008 also offers:

• Further productivity improvements (configuration efficiency)

when creating HMI projects

• Implementation of innovative TCP/IP and web-based automa-

tion and HMI concepts

• Reduced downtime of the machines and systems through new

service concepts

• Secure, flexible and world-wide access to process data

• New SIMATIC HMI devices

SIMATIC WinCC

SIMATIC WinCC is the process visualization system for plant

monitoring with single-user and multi-user solutions and is a

platform for IT & Business Integration with Windows 2000,

XP Professional and Windows 7. A SIMOTION channel has been

available since WinCC Version V7.0 SP2 for interfacing with

SIMOTION. This software is available on the WinCC product

DVD.

Other HMI systems

HMI systems from other manufacturers can be connected to

SIMOTION over TCP/IP using the technology package MIIF.

■

More information

Further information on HMI can be found in

• the Catalog ST 80

• the Industry Mall under Automation technology/SIMATIC HMI

Operator Control and Monitoring Systems

or on the Internet at:

• www.siemens.com/panels

• www.siemens.com/panel-pc

• www.siemens.com/winncc-flexible

SIMOTION HMI devices

Mobile Panels

SIMATIC Mobile Panel 177

SIMATIC Mobile Panel 277

11/4 Siemens PM 21 · 2013

■

Overview

• Mobile HMI devices for direct operator control of the plant and

machine from any point

• Support optimized monitoring of the workpiece or process

providing at the same time direct access and direct line of

sight to the HMI device

• Flexible implementation thanks to hot swapping

• Pixel graphics, brilliant 5.7" color STN display with touch

screen (analog/resistive), 256 colors (MP 177)

• Pixel graphics, brilliant 7.5"/10" color TFT display with touch

screen, 65536 colors (MP 277)

• PROFIBUS or PROFINET variants

• 14 user-configurable and user-label function keys (8 with LED)

for MP 177

• 18 user-configurable and user-label function keys (18 with

LED) for MP 277 7.5"

• Two three-stage enabling buttons

• Communication is supported via a serial, MPI/PROFIBUS or

PROFINET link

• Connection point detection

• Fast system availability after plugging into the junction boxes

• Connected to the PLC and power supply via the junction box

and the connecting cable

■

Benefits

7Hot swapping without interruption of the emergency stop

circuit (with junction box variants PLUS) and without the

occurrence of bus faults

7Fast, accurate setup and positioning

7Ergonomic, compact and light-weight (approx. 1.3 kg)

7Rugged enough to withstand industrial use

7Graphics library available with off-the-shelf picture objects

7The data in the message buffer is retained without battery

backup even when the Mobile Panel is disconnected from the

supply

7Can be used worldwide:

- 32 languages can be configured (incl. Asian and Cyrillic

character sets)

- Up to 5 languages can be selected online on MP 177

- Up to 16 languages can be selected online on MP 277

7Reduction of service and commissioning costs through:

- Backup/restore via a process interface or via a standard

Multi Media Card

- Updates of the configuration with automatic transfer

recognition via all device interfaces

- Long service life of the backlit display

7Simple engineering with comprehensive documentation on

the SIMATIC HMI Manual Collection DVD

■

Application

Regardless of the industry or application, if mobility is required

for the on-site control and monitoring of machines and plants,

SIMATIC Mobile Panels offer many crucial advantages: The

machine operators and commissioning engineers are therefore

able to work exactly where they have the best view of the work-

piece or process. Even with larger production facilities, complex

or enclosed machines, long materials handling or production

lines and conveyor systems, mobile HMI devices allow faster

and more precise setting up and positioning during commis-

sioning. They also ensure shorter downtimes during retooling,

maintenance or repairs.

■

Design

• Ergonomic and compact with different holding and gripping

points (suitable for right-handed and left-handed personnel)

• Pixel graphics, brilliant color displays with touch screen

(analog/resistive)

• User-configurable and user-label function keys with LED

(not MP 277 10")

• The front is resistant to various oils, greases and standard

detergents

• Two three-stage enabling buttons

• Extremely impact-resistant due to twin-wall construction and

rounded enclosure

• Dust-proof and jet-proof enclosure with IP65 degree of protec-

tion on all sides

• Slot for a standard Multi Media Card for backups and restoring

or for storing recipes

• Connection to the PLC via the rugged and reliable junction

boxes with IP65 degree of protection

- Junction box variant BASIC: Enables the STOP pushbutton

to be integrated into the safety circuit

- Junction box variant PLUS: Enables the STOP pushbutton to

be integrated into the safety circuit. The emergency stop cir-

cuit remains closed regardless of whether a Mobile Panel is

plugged in or not. If the Mobile Panel is disconnected during

operation, the emergency stop circuit in the junction box is

automatically closed which prevents triggering of the emer-

gency stop circuit.

• Fast system availability after plugging into the junction boxes:

- By using an optional rechargeable battery pack, the connec-

tion boot-up time of the Mobile Panel – after a short period of

separation from the junction box – can again be significantly

reduced.

• Detection of the connection point can be used to perform

machine-specific HMI authorizations or actions depending on

the selected connection point

MP 277 IWLAN

For use in combination with SIMOTION from Mobile Panel 277

IWLAN V2 upwards and WinCC flexible 2008 SP3.

To use the MP277 IWLAN you will need an IWLAN infrastructure.

You will find further details in catalog ST80.

SIMOTION HMI devices

Touch Panels / Operator Panels

SIMATIC TP 177B / SIMATIC TP 177B Widescreen /

SIMATIC OP 177B

11/5

Siemens PM 21 · 2013

■

Overview

• Touch Panels TP 177B/TP 177B Widescreen and Operator

Panel OP 177B for operator control and monitoring of

machines and plants

• Touch/Key combination for OP 177B and TP 177B Widescreen

• Universal entry-level device in the touch panel class with

graphics capability featuring an extensive range of functions

• Pixel graphics display with analog touch screen (analog/

resistive)

- 4.3" color TFT Widescreen (256 colors) or

- 5.7" Blue mode/color STN (4 blue levels/256 colors)

• Configurable system keys for OP 177B and TP 177B Wide-

screen

• Interfaces for communication with SIMATIC S7 and SIMOTION

are integrated (e.g. MPI, PROFIBUS DP, Ethernet interface for

color variant)

• USB interface for I/O, e.g. for downloads, printer

■

Benefits

7Integral component of Totally Integrated Automation (TIA):

Increased productivity, minimized engineering, reduced life-

cycle costs

7Reduction of service and commissioning costs through:

- Backup/restore via a process interface, USB or via a stan-

dard Multi Media Card

- Remote downloading of the configuration with automatic

transfer recognition even via WAN (Wide Area Network)

using TeleService adapter

- Maintenance-free design (no battery) and long service life of

the backlit display

7Non-volatile, maintenance-free message buffer

7Can be used worldwide:

- 32 languages can be configured (incl. Asian and Cyrillic

character sets)

- Up to 16 online languages can be selected directly on the

device

7Graphics library available with off-the-shelf picture objects

7Standard hardware and software interfaces for increased

flexibility

7Standard Multi Media Card slot

- Used for recipe data records and for backups of configura-

tion/system data

7Integrated printer port

7Extensive documentation on the SIMATIC HMI Manual

Collection DVD

■

Application

The TP/OP 177B Touch Panels can be used wherever machines

and systems are controlled and monitored directly on-site –

whether in production, process or building automation. They are

used in all types of sectors and applications.

■

Design

• Display variants:

- 4.3" TFT Widescreen display with 256 colors or

- 5.7" STN display with 256 colors or 4 blue levels

• LED or CCFL1) backlit display with long service life

• Resistive analog touch screen

• Numerical "on-screen" system keyboard for decimal, binary

and hexadecimal number formats

• On-screen alpha keyboard (English font)

• Compact design with low mounting depth

• Rugged plastic enclosure

• The front is resistant to various oils, greases and standard

detergents

• A protective cover is available as an option to achieve

NEMA 4 degree of protection and as additional protection

against scratching

• Plug-in terminals for connecting the power supply

• Interfaces for connection of PLC, printer and engineering

computer are integrated

• Standard Multi Media Card slot

1) Cold Cathode Fluorescence Lamps

SIMOTION HMI devices

Touch Panels / Operator Panels

SIMATIC TP 277 / SIMATIC OP 277

11/6 Siemens PM 21 · 2013

■

Overview

• Touch Panel TP 277 and Operator Panel OP 277 with compre-

hensive functionality for demanding machine visualization

•Display:

- TP 277: Pixel graphics 5.7" TFT touch screen

(analog/resistive)

- OP 277: TFT display, color (256 colors)

• Keyboard:

- TP 277: Numeric and alphanumeric on-screen keyboard

- OP 277: Membrane keyboard with 36 system keys,

24 user-programmable function keys, 18 of which with LEDs

• All interfaces are on-board, e.g. MPI/PROFIBUS DP, USB,

PROFINET/Ethernet

• Maintenance-free, non-volatile (retentive) message buffer

■

Benefits

7Integral component of Totally Integrated Automation (TIA):

Increased productivity, minimized engineering, reduced life-

cycle costs

7Modular expansion possible with options such as:

- WinCC flexible/Sm@rtAccess for communication between

different SIMATIC HMI systems

- WinCC flexible Sm@rtService for remote maintenance and

servicing of machines/plants via the Intranet/Internet

7Reduction of service and commissioning costs through:

- Backup/restore via USB, MPI, PROFIBUS DP, RS 232

(serial) and optional via Ethernet (TCP/IP) or CompactFlash

card (CF card)

- Remote download/upload of configuration and firmware

- Specific drivers can be reloaded

- Long service life of the backlit display

7Graphics library available with off-the-shelf picture objects

7Can be used worldwide:

- 32 languages can be configured (incl. Asian and Cyrillic

character sets)

- Up to 16 languages can be selected online

7Standard hardware and software interfaces for increased

flexibility

7External Multi Media Card can be used for recipe data

records, archives and for backups of configuration/system

data

7Integrated USB interface for "hot swapping" of peripherals

(printer, keyboard, mouse, barcode reader)

7Standard Windows storage formats (CSV) for archives and

recipes for use with other standard tools (e.g. Microsoft Excel)

7The Smart Access and Smart Services options can be used

■

Application

The SIMATIC TP 277 Touch Panels/SIMATIC OP 277 Operator

Panels can be used wherever machines and systems are con-

trolled and monitored on-site – whether in production, process or

building automation. They are used in all types of sectors and

applications.

Diskless and fan-free operation, real-time capability and short

boot-up times support demanding machine visualization even

under harsh industrial conditions.

■

Design

•Display:

- TP 277: Pixel graphics 5.7" TFT touch screen

(analog/resistive)

- OP 277: TFT display, color (256 colors)

• Keyboard:

- TP 277: Numeric and alphanumeric on-screen keyboard

- OP 277: Membrane keyboard with 36 system keys,

24 user-programmable function keys (18 with LEDs)

• Scripts and archives

• Compact design with low mounting depth

• IP65/NEMA 4/NEMA 12 (front) or IP20 (rear)

• The front is resistant to various oils, greases and standard

detergents

• High electromagnetic protection and extreme vibration

strength

• Plug-in terminals for 24 V DC power supply

• Interfaces:

- MPI, PROFIBUS DP (up to 12 Mbit/s) as well as USB 1.1

(max. 100 mA) on-board

- Ethernet (PROFINET IO capable)

• External Multi Media Card, can be used for the recipe data,

records, archives and for backups of configuration and

system data.

SIMOTION HMI devices

Multi Panels

SIMATIC MP 177 / SIMATIC MP 277

11/7

Siemens PM 21 · 2013

■

Overview

• Like Operator Panels, Multi Panels (MP) are used for on-site

machine operation and monitoring

• Their functionality can be expanded with the installation of

additional Windows CE applications (Multi Panel and Panel

options)

• The SIMATIC MP 177/MP 277 Multi Panels running Windows

CE combine the ruggedness of Operator Panels with the

flexibility of PCs

• Pixel graphics TFT display, color (64 k colors) with 5.7" display

diagonal for MP 177, with 7.5" or 10.4" display diagonals for

MP 277

• MP 177, touch screen (analog/resistive)

• MP 277 8" Keys: 26 function keys or direct keys

(e.g. over PROFINET IO)

• MP 277 10" Keys: 36 function keys or direct keys

(e.g. over PROFINET IO)

• MP 277 8" and 10" Touch: Touch screen (analog/resistive)

• All interfaces are on-board, e.g. MPI, PROFIBUS DP, USB,

Ethernet, serial

• Maintenance-free, non-volatile (retentive) message buffer

•Windows CE 5.0

■

Benefits

7Integral component of Totally Integrated Automation (TIA):

Increased productivity, minimized engineering, reduced

lifecycle costs

7Modular expansion possible with options such as:

- ThinClient/MP for use as a terminal client on a Windows

terminal server

- WinCC flexible/Sm@rtAccess for communication between

different SIMATIC HMI systems

- WinCC flexible/Sm@rtService for remote maintenance and

servicing of machines/plants via the Intranet/Internet

- WinCC flexible/OPC server for communication with

applications from various manufacturers

- MS Pocket Internet Explorer (already included in scope of

delivery)

7Reduction of service and commissioning costs through:

- Backup/restore via Ethernet (TCP/IP), USB, MPI,

PROFIBUS DP, RS 232 (serial) or optional via PC/CF card

- Remote download/upload for configuration and firmware

- Specific drivers can be reloaded

- Long service life of the backlit display

7Graphics library available with off-the-shelf picture objects

7Can be used worldwide:

- 32 languages can be configured (incl. Asian and Cyrillic

character sets)

- Up to 16 languages can be selected online

7Standard hardware and software interfaces for increasing

flexibility:

- SD/Multi Media Card combination slot for memory expan-

sions, backup/restore or additional interfaces

- Ethernet (TCP/IP) for central data and project management;

when configuring with WinCC flexible, and for communica-

tion with the control link to SIMATIC S7

- Standard Windows storage formats (CSV) for archives and

recipes permit use with other standard tools (e.g. Microsoft

Excel)

■

Application

The SIMATIC MP 177/SIMATIC MP 277 Multi Panels can be used

wherever machines and systems are operated and monitored di-

rectly on-site – whether in production, process or building auto-

mation. These are used in the most popular branches and appli-

cations and can be expanded in their applications with the Multi

Panel options, e.g. displaying HTML documents via the Micro-

soft Pocket Internet Explorer.

Windows CE meets the basic prerequisites for applications in

rough industrial environments. The diskless and fan-free design

enables implementation in areas where high vibration or dust

load limits the operation of a PC. Short boot-up times make the

Multi Panels ready for operation quickly.

■

Design

• Compact design with low mounting depth

• The front is resistant to various oils, greases and standard

detergents

• Degree of protection IP65/NEMA 4x/NEMA 12 (front) or IP20

(rear)

• Plug-in terminals for 24 V DC power supply

• Interfaces:

- RS 485/RS 422 or Ethernet interface for process connections

(MPI, PROFIBUS DP up to 12 Mbit/s, PROFINET)

- USB for mouse, keyboard, printer, barcode reader and

downloading/uploading the configuration

- Ethernet (TCP/IP), for exchanging data with a higher-level

PC, connection of a network printer and downloading/

uploading the configuration

• SD/Multi Media Card combination slot

SIMOTION HMI devices

Multi Panels

SIMATIC MP 377

11/8 Siemens PM 21 · 2013

■

Overview

• Like Operator Panels, Multi Panels (MP) are used for on-site

machine operation and monitoring

• Their functionality can be expanded with the installation of

additional Windows CE applications (Multi Panel and Panel

options)

• SIMATIC MP 377 devices running Windows CE combine the

rugged construction of Operator Panels with the flexibility of

PCs

• Pixel graphics 12.1", 15.1" and 19" TFT display, color

(64 k colors)

• MP 377 12" Keys:

38 system keys, 36 user-configurable and user-label function

keys

• MP 377 12", 15", and 19" Touch:

Touch screen (analog/resistive)

• All interfaces are on-board, e.g. MPI, PROFIBUS DP,

PROFINET IO, USB, Ethernet, serial

■

Benefits

7Integral component of Totally Integrated Automation (TIA):

Increased productivity, minimized engineering, reduced

lifecycle costs

7Modular expansion possible with options such as:

- Software PLC SIMATIC WinAC MP

- WinCC flexible/Sm@rtAccess for communication between

different SIMATIC HMI systems

- WinCC flexible/Sm@rtService for remote maintenance and

servicing of machines/plants via the Intranet/Internet

- WinCC flexible/OPC server for communication with applica-

tions from various manufacturers

- MS Pocket Internet Explorer (already included in scope of

delivery)

- Multimedia: Viewer for .pdf, .xls, .doc files; Internet Explorer,

Media Player and cameras over standard interfaces

7Reduction of service and commissioning costs through:

- Backup/restore via Ethernet (TCP/IP), USB, MPI,

PROFIBUS DP, RS 232 (serial) or optional via PC/CF card

- Remote download/upload for configuration and firmware

changes

- Specific drivers can be reloaded

- Long service life of the backlit display

7Graphics library with off-the-shelf picture objects

7Can be used worldwide:

- 32 languages can be configured (incl. Asian and Cyrillic

character sets)

- Up to 5 languages can be selected online

7Standard hardware and software interfaces for increasing

flexibility:

- PC/CF card slot for memory expansions, backup/restore or

for additional interfaces

- Ethernet (TCP/IP) for central data and project management

- Standard Windows storage formats (CSV) for archives and

recipes permit use with other standard tools (e.g. Microsoft

Excel)

■

Application

The SIMATIC MP 377 Multi Panels can be used wherever

machines and systems are operated and monitored directly

on-site – whether in production, process or building automation.

These are used in the most popular branches and applications

and can be expanded with the Multi Panel options, e.g. by

displaying HTML documents via the Microsoft Pocket Internet

Explorer.

Windows CE meets the basic prerequisites for applications in

rough industrial environments. The diskless and fan-free design

enables implementation in areas where high vibration or dust

load limits the operation of a PC. Short boot-up times make the

Multi Panels ready for operation quickly.

■

Design

• Compact design with low mounting depth

• The front is resistant to various oils, greases and standard

detergents

• Degree of protection IP65/NEMA 4x/NEMA 12 (front) or IP20

(rear)

• Plug-in terminals for 24 V DC power supply

• Interfaces:

- TTY/RS 232, RS 485/RS 422 interface for process connec-

tions (MPI, PROFIBUS DP up to 12 Mbit/s)

- USB for mouse, keyboard, printer, barcode reader and

downloading/uploading the configuration

- Ethernet (TCP/IP), PROFINET for exchanging data with a

higher-level PC, connection of a network printer and down-

loading/uploading the configuration

• Retentive, maintenance-free message buffer

• Slot for CompactFlash card (CF card)

• Slot for PC card

SIMOTION HMI devices

Panel PCs

SIMATIC HMI IPC277D

11/9

Siemens PM 21 · 2013

■

Overview

SIMATIC HMI IPC277D for implementing simple visualization

and control tasks

• Offers great flexibility in the selection of rugged widescreen

fronts

• From 7" to 12" for more freely-configurable display area

• High resolution, large viewing angle, and up to 100 % dimma-

ble backlighting for a brilliant display with optimized power

consumption

• Absolutely maintenance-free due to the use of CompactFlash

and SSD as mass storage and fanless operation up to 50 °C

(122 °F) ambient temperature

• Maximum industrial functionality due to non-volatile retentive

memory

• Ready-to-run embedded bundles with visualization or/and

control software

The following front installation versions are available:

•7" Touch

•9" Touch

• 12" Touch

• 15" / 19" available soon

• All fronts in widescreen design

■

Application

The SIMATIC HMI IPC277D is a particularly compact and

energy-saving Nanopanel PC with integrated touch displays

with 7" screen diagonal or larger. The heart of the SIMATIC HMI

IPC277D are high-performance Intel Atom processors of the

latest generation. The Nanopanel PCs are designed for main-

tenance-free 24-hour continuous use as well as for high temper-

ature, vibration, shock and EMC requirements in the following

applications:

• Simple visualization and control tasks, for example in mechan-

ical engineering, plant construction, transportation systems or

power transmission.

• Acquisition, further processing and visualization of data

■

Design

The HMI IPC277D is a compact device comprising an operator

control unit with integral computer unit.

Computer unit:

• Rugged metal installation housing, resistant to vibration and

shock, with high electromagnetic compatibility

• Processor / main memory configuration:

- Intel Atom E640 1.0 GHz, 1 GB RAM GHz

- Intel Atom E660 1.3 GHz, 2 GB RAM GHz available soon

• Interfaces (accessible from one side):

- 2 x LAN 10/100/1000 Mbit/s Ethernet interface (RJ45)

- 3 x high-speed USB V2.0

- 1 x COM1 (RS232)

• Fieldbus

- PROFINET Realtime via Standard Ethernet interface

• Retentive memory

- 512 KB retentive memory (MRAM), of which 128 KB within

the buffer time (optional)

• Isolated power supply: 24 V DC (20.4 to 28.8 V)

• Drives:

- CompactFlash drive (replaceable, accessible):

2GB, 4GB or 8GB

- Solid-State Drive 50 GB (SLC technology)

• Preinstalled operating systems:

- Windows XP Embedded Standard 2009

- Windows XP Professional Multi-Language

- Windows Embedded Standard 7 / Windows 7 available soon

Components of the operator control unit:

The operator control units are available in the following versions:

7" Touch

• 7" TFT color display, 800 x 480 pixels

• Resistive analog touch screen

9" Touch

• 9" TFT color display, 800 x 480 pixels

• Resistive analog touch screen

12" Touch

• 12" TFT color display, 1280 x 800 pixels

• Resistive analog touch screen

15" / 19" Touch available soon

SIMOTION HMI devices

Panel PCs

SIMATIC HMI IPC477C

11/10 Siemens PM 21 · 2013

■

Overview

• Embedded PC platform with extremely high industrial compat-

ibility for demanding tasks in the field of PC-based automation

• Maintenance-free (no rotating components such as fan and

hard disk)

• Rugged construction:

The PC can withstand the most harsh mechanical stresses

while maintaining reliable operation

• Compact design (only 75 mm (2.95 in) mounting depth)

• High investment security

• Fast integration capability

• Front panel versions:

- 12", 15" and 19" TFT Touch

- 12" and 15" TFT Key

■

Benefits

7Excellent industrial compatibility due to rugged construction,

even when subjected to extreme vibration and shock

7High investment protection thanks to assured spare parts

availability of the components (for 5 years following the end of

active marketing)

7Excellent continuity of components for long-term machine

concepts without any new engineering costs

7Front and rear USB 2.0 interfaces for quick and easy connec-

tion of additional hardware components

7High degree of industrial functionality thanks to integrated

PROFIBUS DP/MPI and Ethernet interfaces

7Maintenance-free since there are no rotating parts (fans and

hard disk)

7Reduction in downtime thanks to high system availability

- Efficient self-diagnostics (SIMATIC PC DiagMonitor)

- The high security and reliability of an embedded platform

7Integral component of Totally Integrated Automation (TIA):

Increased productivity, minimized engineering, reduced

lifecycle costs

7Ready-to-run, complete solutions (software is already installed

and preconfigured) for visualization and automation with

WinCC flexible and WinAC RTX

■

Application

The SIMATIC HMI IPC477C is designed for use directly on-site

at the machine, when a combination of ruggedness and reliabil-

ity (i.e. the reliability of an embedded platform) and the open-

ness of a PC are required (e.g. module expansions and the con-

nection of I/O devices such as printers, keyboards, etc.).

Due to the low mounting depth of only 75 mm (2.95 in), it can

also be used in confined spaces.

The PC can be used in production automation as well as in

process automation and can be mounted in control cabinets,

consoles, 19" cabinets/racks and in swing arms (booms).

SIMATIC Panel PCs are the ideal platform for PC-based

automation:

• PC-based visualization on site at the machine with

SIMATIC WinCC flexible

• PC-based control with SIMATIC WinAC RTX

• SIMATIC WinCC Web Client for web-based solutions with

WinCC/Web Navigator

Siemens offers a complete modular system of automation

components that are designed to integrate perfectly.

■

Design

Compact powerful industrial PC in embedded technology,

comprising operator control unit with integrated computer unit.

Components of the computer unit:

• Rugged metal installation housing, resistant to vibrations and

shocks, with high electromagnetic protection.

• Processor, configurable: Intel Celeron M 1.2 GHz,

Intel Core 2 Solo 1.2 GHz and Intel Core Duo 1.2 GHz

• Main memory: 1 DIMM socket, DDR3, 1 GB, alternatively 2 GB

or 4 GB

• Battery-backed retentive memory 2 MB

• Compact Flash Drive (internal) with pre-installed Windows XP

Embedded (Image) operating system and optional software

• Graphics on-board (VGA analog, 1024 x 768)

Interfaces

• 2 x Ethernet on-board (10/100/1000 Mbit/s)

• 5 x USB 2.0 port, 500 mA (1 x front)

• 1 x COM 1 (RS 232)

• 1 x DVI-I interface (for connecting a second display unit)

• 2 x slot for CF card (2 GB, 4 GB or 8 GB) Solid State Disc

(at least. 32 GB)

• Fieldbus: Configurable with PROFINET or PROFIBUS onboard

Power supply

• 24 V DC, with On/Off switch

SIMOTION HMI devices

Panel PCs

SIMATIC HMI IPC477C

11/11

Siemens PM 21 · 2013

■

Design (continued)

Components of the operator control unit:

The operator control units are available in the following versions:

12" Key

• 12.1" TFT color display, 800 x 600 pixels (SVGA)

• Membrane keyboard with international PC character set and

36 additional function keys with LED and an integrated mouse

12" Touch

• 12.1" TFT color display, 800 x 600 pixels (SVGA)

• Touch screen (analog/resistive)

15" Key

• 15.1" TFT color display, 1024 x 768 pixels (XGA)

• Membrane keyboard with international PC character set and

36 additional function keys with LED and an integrated mouse

15" Touch

• 15.1" TFT color display, 1024 x 768 pixels (XGA)

• Touch screen (analog/resistive)

19" Touch

• 19.1" TFT color display, 1280 x 1024 pixels (SXGA)

• Touch screen (analog/resistive)

The operator control units feature a USB 2.0 port on the front for

connecting external peripheral devices, such as a mouse or key-

board. They fulfill the requirements of degrees of protection IP65

and NEMA 4. All operator control units are also available without

a USB port on the front.

The computer unit is connected via a connecting cable attached

at the rear of the operator control unit.

Expansion components

SIMATIC PC DiagMonitor

• PC diagnostics/alarm software for the early detection and

diagnostics of PC problems

• Comprehensive monitoring of temperature and watchdog

• Operating hours counter for preventive maintenance

• Integrated log functions, comprehensive text messages,

online help (English/German)

• Network-wide monitoring via SNMP and OPC interface

possible

SIMATIC PC/PG Image & Partition Creator

• Software tool for data backup of mass storage contents

(CF cards, hard disks)

• Fast, bit-exact restoration of system and data partitions;

application software and special installations are also backed

• Software tool for adaptation of mass storage partitioning

3.5" USB disk drive

The USB disk drive is provided for the high-speed exchange of

user data, such as recipes, or files. The drive should not be used

as a cyclic archiving drive. The front-panel mounting and degree

of protection IP54 permit data exchange from the front without

opening the control cabinet door.

The device is connected via the USB interface of the Panel PC.

The power is also supplied over the USB interface. A USB cable

of 1 m (3.28 ft) length is included in the scope of supply. The disk

drive complies with the USB 1.1 standard. 3.5" high density

disks can be used (1.44 MB).

SIMATIC PC USB FlashDrive

• Mobile memory medium for SIMATIC PC/PG

• High-speed data transfer (USB 2.0) and high memory

capacity

• Ultra-compact and rugged

Industrial USB Hub 4

• USB peripherals can be connected and operated via the

USB Hub 4 without opening the control cabinet door

• Industry-standard USB 2.0 Hub, Front IP65

• Mounting in control cabinet door or on DIN rail

• Inspection window and LEDs for each of the four interfaces

SIMOTION HMI devices

Panel PCs

SIMATIC HMI IPC577C

11/12 Siemens PM 21 · 2013

■

Overview

• Industry-standard PC platform for demanding operator control

and monitoring tasks

• Maximum performance thanks to high processor performance

at an attractive entry-level price

• Fast integration capability

• Intel Core 2 Duo processors up to 1.86 GHz

• RAM DDR3 technology from 1 to 4 GB

• Gigabit Ethernet ports

• High-speed USB 2.0 port on front

• Front panel versions:

- 12", 15" and 19" TFT Touch

■

Benefits

7Suitable for industrial environments subject to vibration and

shock loads

7High investment protection thanks to guaranteed availability of

spare parts

7Excellent continuity of components for long-term machine

concepts without any new engineering costs

7USB interface for quick and easy connection of required

components

7Reduction in downtime thanks to high system availability

- Efficient self-diagnostics (SIMATIC PC DiagMonitor)

- Solutions for data backup

7Integral component of Totally Integrated Automation (TIA):

Increased productivity, minimized engineering, reduced

lifecycle costs

■

Application

The SIMATIC HMI IPC577C is used in production and process

automation and can be installed in control cabinets and switch-

boards.

SIMATIC Panel PCs are a flexible platform for PC-based

automation:

• PC-based visualization on site at the machine with

SIMATIC WinCC flexible

• Complex solutions with SIMATIC WinCC process visualization

• PC-based control with SIMATIC WinAC Software PLC or with

SIMATIC WinAC Slot PLC

Siemens offers a complete modular system of automation

components that are designed to integrate perfectly.

The SIMATIC HMI IPCs can be ordered together with

WinCC flexible or WinCC as SIMATIC HMI Packages at a lower

price (see SIMATIC HMI complete system).

■

Design

The SIMATIC HMI IPC577C comprises a computer unit and an

operator control unit.

Components of the computer unit:

• Rugged metal installation housing, resistant to vibrations and

shocks, with high electromagnetic protection.

• Processor:

- Intel Celeron M 1.2 GHz, 1 MB L2 cache, 800 MHz FSB

- Intel Core 2 Solo 1.2 GHz, 3 MB L2 cache, 800 MHz FSB

- Intel Core 2 Duo 1.86 GHz, 6 MB L2 cache, 1066 MHz FSB

• Main memory: 1 DIMM socket, DDR3,

basic configuration 1 GB, expandable up to 4 GB

• 3.5" hard disk drive: ≥80 GB

•DVD-RW drive

• Interfaces:

- 2 x Gbit Ethernet onboard

- 4 x USB 2.0 port, 1 x USB at front

- 1 x serial V.24 (9-pin)

- 1 x parallel

- 1 x slot for CF card

- 1 x ext. graphics (DVI-I)

• Free slots for expansion:

- 1 x PCI slot

• Fieldsbus (configurable with PROFIBUS or PROFINET

onboard)

• Power supply:

- 100/240 V AC (autorange), 50/60 Hz

-24VDC

SIMOTION HMI devices

Panel PCs

SIMATIC HMI IPC577C

11/13

Siemens PM 21 · 2013

■

Design (continued)

Components of the operator control unit:

The operator control units are available in the following versions:

12" Touch

• 12.1" TFT color display, 800 x 600 pixels (SVGA)

• Touch screen (analog/resistive)

• USB 2.0 port on front

15" Touch

• 15.1" TFT color display, 1024 x 768 pixels (XGA)

• Touch screen (analog/resistive)

• USB 2.0 port on front

19" Touch

• 19.1" TFT color display, 1280 x 1024 pixels (SXGA)

• Touch screen (analog/resistive)

Expansion components

SIMATIC PC/PG Image & Partition Creator

• Software tool for data backup of hard disk contents

• Fast, bit-exact restoration of system and data partitions;

application software and special installations are also backed

• Software tool for hard disk partitioning

3.5" USB disk drive

The USB disk drive is provided for the high-speed exchange of

user data, such as recipes, or files. The drive should not be used

as a cyclic archiving drive. The front-panel mounting and degree

of protection IP54 permit data exchange from the front without

opening the control cabinet door.

The device is connected via the USB interface of the SIMATIC

HMI IPC. The power is also supplied over the USB interface. A

USB cable of 1 m (3.28 ft) length is included in the scope of sup-

ply. The disk drive complies with the USB 1.1 standard. 3.5" high

density disks can be used (1.44 MB).

Operation of the USB disk drive with SIMATIC HMI IPCs:

• Windows XP: possible without separate driver

• Windows 2000: the required driver is included in the scope of

supply of the operating system

Industrial USB Hub 4

• USB peripherals can be connected and operated via the

USB Hub 4 without opening the control cabinet door

• Industry-standard USB 2.0 Hub, Front IP65

• Mounting in control cabinet door or on DIN rail

• Inspection window and LEDs for each of the four interfaces

SIMOTION HMI devices

Panel PCs

SIMATIC HMI IPC677C

11/14 Siemens PM 21 · 2013

■

Overview

• PC platform with high degree of industrial compatibility for

demanding tasks in the area of PC-based automation

• Rugged construction:

The PC can withstand the most harsh mechanical stresses

while maintaining reliable operation

• Compact design

• High investment security

• Fast integration capability

• Front panel versions:

- 12", 15" and 19" TFT Touch

- 12" and 15" TFT Key

• Operator control unit can be located at a distance of up to

30 m (98.4 ft) from the computer unit (optional)

■

Benefits

7Excellent industrial compatibility due to rugged construction,

even when subjected to extreme vibration and shock

7High investment protection thanks to spare parts availability of

the components (for 5 years following the end of active mar-

keting)

7Excellent continuity of components for long-term machine

concepts without any new engineering costs

7Savings in time and costs due to service-friendly equipment

construction:

- The operating unit and computing unit can be simply hinged

apart for the rapid replacement of components or for future

expansions

- Front and rear USB 2.0 interfaces for quick and easy con-

nection of additional hardware components

7High degree of industrial functionality thanks to integrated

PROFIBUS DP/MPI and two Gigabit Ethernet interfaces

7Operational reliability:

Using the optional direct key module, the process can be

controlled without delay over PROFIBUS DP independently of

the operating system

72 x ≥ 80 GB SATA hard disk system (configured as a single

disk system or RAID1)

7Reduction in downtime thanks to high system availability

7Efficient self-diagnostics (SIMATIC PC DiagMonitor)

7Solutions for preventive data backup

7Integral component of Totally Integrated Automation (TIA):

Increased productivity, minimized engineering, reduced life-

cycle costs

7Additional mounting possibilities available due to separation

of the computing unit and operating unit by means of the

Remote Kit (up to 30 m (98.4 ft), optionally available as acces-

sory)

■

Application

The SIMATIC HMI IPC677C is designed for use directly on-site

at the machine. Due to the minimal mounting depth of only

105/130 mm (4.13/5.12 in), it can also be used in confined

spaces.

The PC can be used in production automation as well as in

process automation and can be installed in control cabinets and

consoles, 19" cabinets/racks and in swing arms (booms).

The Dual Core CPUs with Intel Core Duo technology support

high-performance control and visualization.

With PCIe (x4), the new PCI express (PCIe) cards (x1 and x4) are

also supported.

A SIMATIC Panel PC is the ideal platform for PC-based

automation:

• PC-based visualization on site at the machine with

SIMATIC WinCC flexible

• Complex solutions with SIMATIC WinCC process visualization

• PC-based control with SIMATIC WinAC Software PLC or with

SIMATIC WinAC Slot PLC

Siemens offers a complete modular system of automation

components that are designed to integrate perfectly.

The SIMATIC Panel PCs can be ordered in combination with

WinCC flexible or WinCC as SIMATIC HMI packages at a lower

price.

■

Design

The SIMATIC HMI IPC677C comprises a computer unit and an

operator control unit.

Components of the computer unit:

• Rugged metal installation housing, resistant to vibrations and

shocks, with high electromagnetic protection.

• Processor:

Mobile processors

- Core 2 Duo T7400, 2.16 GHz, Dual Core, 4 MB SLC

- Core 2 Duo T5500, 1.66 GHz, Dual Core, 2 MB SLC

- Celeron M 440, 1.86 GHz, 1 MB SLC

• Intel chipset: 945 GM Express with ICH7R - integrated RAID

controller

• Intel graphics media accelerator GMA950 for high-

performance graphics

• Standard main memory configuration:

512 MB, expandable up to 4 GB (DDR2 667 RAM)

• SATA hard disks with up to 160 GB capacity and NCQ tech-

nology, the special vibration-absorbing hard disk support

ensures reliable operation even under extreme mechanical

stress

• On-board graphics

• Interfaces:

- 2 x Ethernet 10/100/1000 Mbit/s ports (Gbit LAN)

- 4 x high-speed USB 2.0 ports on the computing unit

- PROFIBUS DP/MPI on-board, isolated

- 1 x serial RS 232 C (9-pin)

- DVI-I interface (for VGA and/or DVI-D monitor)

SIMOTION HMI devices

Panel PCs

SIMATIC HMI IPC677C

11/15

Siemens PM 21 · 2013

■

Design (continued)

• Second monitor with identical screen content (Clone) or in

extended monitor mode (Extended)

• Latching mechanism for innovative RJ45 FastConnect plug

• Slot for CompactFlash card externally accessible

• Diskless version (optional with Windows XPe on

CompactFlash card)

• Slots either 2 x PCI or 1 x PCI and 1 x PCIe x4

• Power supply: 110 V/230 V AC (autorange), 50/60 Hz or

24 V DC

• 2 MB battery-backed SRAM memory on-board

(for use with WinAC RTX 2005 SP2)

Optional additional components:

• Main memory expansion to 1 GB, 2 GB or 4 GB

• SATA hard disk ≥ 160 GB

• Double hard disk module 2 x ≥ 60 GB SATA

• DVD-ROM drive

• DVD±RW±R combo drive

• Direct key module

Components of the operator control unit:

The operator control units are available in the following versions:

12" Key

• 12.1" TFT color display, 800 x 600 pixels (SVGA)

• Membrane keyboard with international PC character set and

36 additional function keys with LED and an integrated mouse

15" Key

• 15.1" TFT color display, 1024 x 768 pixels (XGA)

• Membrane keyboard with international PC character set and

36 additional function keys with LED and an integrated mouse

12" Touch

• 12.1" TFT color display, 800 x 600 pixels (SVGA)

• Touch screen (analog/resistive)

15" Touch

• 15.1" TFT color display, 1024 x 768 pixels (XGA)

• Touch screen (analog/resistive)

19" Touch

• 19.1" TFT color display, 1280 x 1024 pixels (SXGA)

• Touch screen (analog/resistive)

The operator control units feature a USB 2.0 port on the front

for connecting external peripheral devices, such as a mouse or

keyboard. They fulfill the requirements of degrees of protection

IP65 and NEMA 4. All operator control units are also available

without a USB port on the front.

The computer unit is connected via a connecting cable attached

at the rear of the operator control unit.

Expansion components

SIMATIC Panel PC Remote Kit

• Separate mounting of computer and operator control unit is

possible

• At a maximum distance of 30 m (98.4 ft)

• Pure hardware solution, no need to install additional software

• Maintaining the panel PC front functionality

SIMATIC PC DiagMonitor

• PC diagnostics/alarm software for the early detection and

diagnostics of PC problems

• Comprehensive monitoring of temperature, fans, hard disks

(SMART), watchdog

• Operating hours counter for preventive maintenance

• Integrated log functions, comprehensive text messages,

online help (English/German)

• Network-wide monitoring via SNMP and OPC interface

possible

SIMATIC PC/PG Image & Partition Creator

• Software tool for data backup of hard disk contents

• Fast, bit-exact restoration of system and data partitions;

application software and special installations are also

backed up

• Software tool for hard disk partitioning

3.5" USB disk drive

The USB disk drive is provided for the high-speed exchange of

user data, such as recipes, or files. The drive should not be used

as a cyclic archiving drive. The front-panel mounting and degree

of protection IP54 permit data exchange from the front without

opening the control cabinet door.

The device is connected via the USB interface of the Panel PC.

The power is also supplied over the USB interface. A USB cable

of 1 m (3.28 ft) length is included in the scope of supply. The disk

drive complies with the USB 1.1 standard. 3.5" high density

disks can be used (1.44 MB).

SIMATIC PC USB FlashDrive

• Mobile memory medium for SIMATIC PC/PG

• High-speed data transfer (USB 2.0) and high memory

capacity

• Ultra-compact and rugged

Industrial USB Hub 4

• USB peripherals can be connected and operated via the

USB Hub 4 without opening the control cabinet door

• Industry-standard USB 2.0 Hub, Front IP65

• Mounting in control cabinet door or on DIN rail

• Inspection window and LEDs for each of the four interfaces

SIMOTION HMI devices

SIMATIC WinCC flexible ES engineering software

11/16 Siemens PM 21 · 2013

■

Overview

• Uniform family of engineering tools for configuration SIMATIC

HMI Operator Panels, the operator control part of SIMATIC C7

units, SIMOTION/SINUMERIK Panel PCs as well as the

PC-based visualization software WinCC flexible Runtime.

• Runs under Windows XP Professional /

Windows 7 Professional, Ultimate, Enterprise

• Current version:

- SIMATIC WinCC flexible 2008 SP3 Micro

- SIMATIC WinCC flexible 2008 SP3 Compact

- SIMATIC WinCC flexible 2008 SP3 Standard

- SIMATIC WinCC flexible 2008 SP3 Advanced

■

Benefits

• The integrated configuration software reduces training, main-

tenance and service overhead and protects the customer's

investments

• Minimized configuration overhead due to reuse of scalable

and dynamizable objects

• Tools for efficient and simple configuration:

- Wizard for defining the basic structure of the HMI project

- Table-based editors simplify the generation and processing

of similar types of object, e.g. for tags, texts, or alarms

- Complex configuration tasks such as the definition of paths

of motion or the creation of the fundamental operator

prompting are simplified by means of graphical configura-

tion

• Comprehensive support of multi-language configurations for

worldwide use

- Selectable views for entering configuration data in several

languages

- System and user-specific text lexicons

- Export/import of language-dependent texts

■

Design

The engineering tools of the SIMATIC WinCC flexible range are

based on one another. The available editors largely depend on

the respectively configured target systems and their functions.

A more comprehensive engineering tool such as WinCC flexible

Standard also offers the facilities of the smaller engineering

tools, e.g. WinCC flexible Compact or Micro.

Upgrading of a smaller engineering tool to a larger one is possi-

ble using a Powerpack. An exception is WinCC flexible Micro.

The scope of functions of the WinCC flexible engineering tools

already includes project support for the Runtime options avail-

able for SIMATIC Panels or WinCC flexible Runtime, indepen-

dent of the RT licenses purchased. Separate licensing is

required for the target system in order to use the configured

Runtime options.

■

Function

Integration into automation systems

• Integration into SIMATIC STEP 7/SIMOTION

- Management of HMI projects within the SIMATIC Manager

- Shared use of communication settings and process point

definitions, i.e. symbols and messages

- Display of the HMI configuring objects in the SIMATIC

Manager

- Transfer of configuring data via MPI/PROFIBUS/Ethernet

using routing

Option for WinCC flexible Engineering

SIMATIC WinCC flexible/ChangeControl

WinCC flexible/ChangeControl enables consistent backup of

configuration data. The history of changes can be precisely

traced in applications requiring uninterrupted tracking over the

complete life cycle of a product.

• Delivered customer projects, approved reference states or

development stages are managed in a database.

• Changes to the project data can be integrated without prob-

lems into the version management by means of new versions.

• A rollback is possible at any time.

SIMOTION HMI devices

SIMATIC WinCC flexible RT visualization software

11/17

Siemens PM 21 · 2013

■

Overview

PC-based visualization software for single-user systems directly

at the machine.

• Runs under Windows XP Professional and Windows 7

Professional, Ultimate, Enterprise

• Current version: SIMATIC WinCC flexible 2008 SP3 Runtime

SIMATIC WinCC flexible Runtime is configured with the

SIMATIC WinCC flexible Advanced configuration software.

■

Benefits

• Optimum price/performance ratio thanks to individually

scalable system functionality

• Functions for all visualization tasks:

Operator functions, graphical and trend displays, signaling

system, log system, archiving (option), recipe management

(option), Audit Trail (option), process fault diagnostics (option)

• Flexible runtime functionality thanks to Visual Basic scripts

• Innovative service concepts with remote operation, diagnos-

tics and administration via intranet and Internet as well as

e-mail communication to increase availability (option)

• Support for simple distributed automation solutions based on

TCP/IP networks at the machine level (option)

■

Application

SIMATIC WinCC flexible Runtime is the high-performance

visualization software for simple visualization tasks at machine

level. It can be used as a single-user solution for all automation

applications in production automation, process automation and

building services automation.

SIMATIC WinCC flexible Runtime can be employed in

connection with the following operator devices:

• SIMATIC Panel PCs

- Panel PC 277D

- Panel PC 477B/477C

- Panel PC 577/HMI IPC577C

- Panel PC 677B

• SIMOTION P350

• Standard PCs with resolutions (W x H in pixels) of:

- from 640 x 480 to 1600 x 1200 or Widescreen Displays

1440 x 900 and 1920 x 1200.

■

Design

SIMATIC WinCC flexible Runtime is available as a software

package with 128, 512, 2048 or 4096 PowerTags. The term

PowerTags is used exclusively to identify process variables and

range pointers that have a process link to the controller. Vari-

ables without process link, constant limit values of variables,

and messages (up to 4000 bit-triggered messages) are also

available for additional system performance.

The range of functions of WinCC flexible Runtime includes the

centralized HMI components for visualizing and reporting, and

it can be expanded to suit requirements and costs by using

optional packages.

SIMATIC WinCC flexible Runtime is configured with the SIMATIC

WinCC flexible Advanced configuration software.

■

Options

WinCC flexible RT can be expanded with the following features:

• WinCC flexible Archives for logging process values and

messages

• WinCC flexible Recipes for managing data sets which contain

associated machine or production data

• SIMATIC WinCC flexible /Audit for

- Recording of operator actions in an Audit Trail

- The ChangeControl option restricts users based on plant

validation

- Checking for later changes via security mechanisms

- Simplified compliance with GPM guidelines

• SIMATIC Logon for central, plant-wide user administration

• WinCC flexible Sm@rtAccess for communication between

different Simatic HMI systems

• WinCC flexible Sm@rtService for remote maintenance and

servicing of machines/plants via the Intranet/Internet

• WinCC flexible OPC server for use as a data server (OPC

server) for higher-level automation components such as

control systems or systems in the office area.

SIMOTION HMI devices

Notes

11/18 Siemens PM 21 · 2013

Catalog PM 21 2013 1000399356

Navigation menu

Versions of this User Manual:

Views

Navigation