Brochure

151392-Catalog 151392-Catalog 151392-Catalog B4 unilog cesco-content

143751-Brochure 143751-Brochure 143751-Brochure B5 unilog cesco-content

421125-Catalog 421125-Catalog 421125-Catalog 078477 Batch1 unilog cesco-content

58574-Catalog 58574-Catalog 58574-Catalog Batch10 unilog cesco-content

2016-09-04

: Pdf 1000399459-Brochure 1000399459-Brochure B4 unilog

Open the PDF directly: View PDF PDF.
Page Count: 40

CHEETAH - LEVITON - C O NT R ACTO R G U I D E 2009 1
Cheetah Speed System
Contractor Guide 2009
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 2
The patented Cheetah Speed System™ enables electrical devices, switches, receptacles, and wallplates to be installed without screws
using a revolutionary speed anchor and snap & lock system, researched and developed with and by electricians. The Cheetah Speed
System™ increases the speed of installation by up to 40% to 50%, and at the same time, offers the elegance, style, and designer look of
screwless wallplates, at a very affordable price.
Cheetah Speed System - How The System Works
CHEETAH SPEED BOXES
Cheetah Speed Boxes (1 - 4 gang boxes) are made from high
strength thermoplastic composites with specially designed
speed anchor slots. Each slot has teeth molded to receive
Cheetah Speed Anchors. As the speed anchor is pushed into
the speed anchor slot, the teeth on the box and speed anchor
enage in a zip-tie fashion to securely hold the anchor.
CHEETAH SPEED DEVICES
Cheetah devices (switches, receptacles, dimmers, GFCI, etc.)
are pre-assembled with Cheetah Speed Anchors fastened
with standard 6/32 screw (for easy removal or adjustment after
installation). After you wire the Cheetah speed device (quickwire
or side wire terminals), just push it in! The Cheetah Speed
anchors zip-tie into the patented Cheetah Speed wallboxes -
always centered and flush with the wall - requiring no screws for
installation or finish!
CHEETAH SCREWLESS WALLPLATE
After the device is pushed (zip-tie) into the box, the Cheetah
device is flush to the wall. Each Cheetah device has 4 holes
which the Cheetah screwless wallplates simply snap into, flush
with the wall. Cheetah matte finish wallplates are made from
high strength thermoplastic. Each wallplate has eight (8) tabs
to ensure a tight snug fit always flush with wall.
FOR MORE INFORMATION - WATCH PRODUCT INSTALLATION VIDEOS - WWW.CHEETAHSPEED.COM
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 3
PROJECT SPECS
Project: Southernside Apartments
Location: St. Louis, MO
Size: 220 Units
Crew: 2 electricians/unit
LABOR SAVINGS
Screws: 150 minutes / unit
Cheetah: 100 minutes / unit
Tim Branham started Branham Electric, Inc. in 1991. Headquartered in St. Louis,
Missouri; the company’s emphasis has always been super-custom homes and
multi-family/mixed-use construction. Over the past few years Branham Electric
has been the electrical contractor of choice for most of the areas’ large multi-
family/mixed-use projects and many of St. Louis’ outstanding luxury homes.
Tim knows construction and stresses that labor will either make or break any
residential project!
“We recently tried Cheetah and could not believe the results. Our electricians are
trained for speed, still we were more than pleasantly surprised when the Cheetah
numbers came in.” Tim Branham
- Owner
Cheetah saved me
$11,450.00 in labor
on just one project!
PROJECT SPECS
Location: Aurora, Colorado
Project: Broadstone Southlands
Apartments
Size: 340 Units
LABOR SAVINGS
Screws: 3 hours per unit
Cheetah: 1 hour per unit
“Being in the Electrical Contracting business means you are in the labor
business. If you can’t control your labor cost you can’t control your profits”
said Rick Stocking President of 1st Electric Contractors in Lakewood,
Colorado. “At 1st Electric we are continually searching for products that
save labor without compromising quality. That’s exactly what we have
found with Cheetah. Just by using Cheetah’s speed anchor devices and
screw-less cover plates we are saving an average of 2-hours per unit and
on our 340-unit project that’s 680 man hours. That’s just the obvious
savings. With one less person we are still able to accelerate the schedule.
I never imagined it was costing us so much money just to turn screws.”
Rick Stocking - President/Owner
Cheetah saved me 680
hours in labor on just one
project!
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 4
PROJECT SPECS
Project: Sterling Pointe Apartments
Location: Flagstaff, Arizona
LABOR SAVINGS
Screws: 4 hours / unit
Cheetah: 2 hours / unit
Cheetah saved me $17,300.00 in labor!
At AEC Electric, speed is a passion and a hobby. Our slogan says it all, “Our Customers are the Winners”! We have used Cheetah on 3 large multi-family
projects. In one project alone Cheetah saved me over $9,600.00. We love the big boxes and the clean trim look. Our customers love the screw-less look,
we love the speed!
“When it comes to speed, I am an avid fan. Cheetah has not only cut our labor costs significantly, but I am impressed with the quality and the product
always looks awesome! We have cut our labor savings by 50% with Cheetah.“ Jim Anderson - Owner
COMPANY SPECS
Avg Home Size: 1500 sq. ft.
Location: Safford, Az
Builder: Providence
Avg Crew per Home: 1 electricians
LABOR SAVINGS
Screws: 2.5 hours
Cheetah: 45 minutes
“Do the math! That is over 60 days labor savings on this project. I am saving over 2 hours per home.
It adds up, I estimate we will save over $15,000 in labor savings on this project alone. The labor
savings are huge!”
Grant Henderson owns and runs Sidewinder Electric. He knows labor is everything. He is currently
using Cheetah on a 240 home project in Safford, Arizona.
“The labor savings are proof. My crew completed their first 2,500 square foot house in Cheetah
45 minutes. The same crew takes 2 ½ hours on an identical house with regular screws. I’m using
Cheetah right now on 240 homes. It really is a no-brainer”
Grant Henderson - Sidewinder Electric
Cheetah saved me 480 hours in labor
on just one project!
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 5
Cheetah Speed System
Frequently Asked Questions
How much more expensive are the Cheetah Speed System products?
A: In Florida, an electrical contractor compared Cheetah to the least expensive wallboxes, devices, and wallplates in that
market. The “total home” cost of Cheetah screwless wallplates, devices and boxes were approx. $22.50 more for the entire
home. The electrician was able to trim the house out in less than 1 hour as compared to 4 hours using traditional devices.
He saved product costs in less than 15 minutes.
If I install the Cheetah Speed System boxes, can I use standard screw devices?
A: Yes, just insert the speed anchors and screw away! The speed anchors “zip-tie” into the Cheetah Speed Boxes to turn the
box into a standard non-metallic outlet box. Visit www.cheetahspeed.com to see how this is done.
How do I remove a device once it is inserted?
A: The speed anchors are fastened to a device using standard 6/32 screws (used on all electrical devices). Just unscrew the
device. The speed anchors stay in the box (turning the box into a standard outlet box). You can either screw in a standard
device, or using a screwdriver, punch the speed anchors through the teeth in the box and insert a new Cheetah-enabled
device (with speed anchor pre-assembled). Visit www.cheetahspeed.com to see how this is done.
How strong are the speed anchors once they are inserted into the box?
A: The speed anchors have been tested to withstand a 50 lb. pull test per anchor. The UL standard requires only a 25 lb. pull
test. The Speed Anchor teeth are one-directional to allow the anchor to “zip-tie” into the box, but not come out. To remove
a speed anchor, simply punch (with a screwdriver) the speed anchor past the teeth and let it fall into the back of the wall.
What types of materials are used for the Cheetah Speed System products?
A: The Cheetah Speed Boxes are made from high strength thermoplastic. All Cheetah Boxes are 2-Hour Fire Rated
for common wall installations. Cheetah devices and wall plates are made from high strength thermoplastic.
All products are ETL tested and listed to UL standards through OSHA National Testing Laboratories Standards.
What happens if drywall mud gets in the speed anchor slots?
A: No worries, just use a screw driver to punch the mud through the slot. Easy to do and is actually faster than cleaning out
standard screw boxes. Don’t worry about hurting the teeth. If you notice a lot of mud in the boxes, fire the drywall crew!
Commitment to Customers
Our commitment is to deliver innovation, quality, and service to our customers. We are constantly enhancing and improving our
products based upon feedback and use. We extensively field test our products to ensure “real-world” application and compliance.
We rigorously test our products to industry standards through OSHA approved independent testing laboratories. We believe in
principles of integrity, hard work, and high quality service.
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 6
Table of Contents
DECORA® & TOGGLE SWITCHES 15A-120VAC - Residential Grade Switches
20A-125VAC - Commercial / Spec Grade Switches
15A-120/277VAC - Combination Devices
PAGE 8-10
UL20 Standards Certified, ETL listed, CSA Certified.
DECORA® & DUPLEX RECEPTACLES
15A-125V & 20A-125V - Residential Grade Receptacles
15A-125V - Tamper Resistant & Weather Resistant Receptacles
15A-125V & 20A-125V - Commercial / Spec Grade Receptacles
PAGE 11-13
UL498 Standards Certified, ETL listed, CSA Certified.
GFCI & DRYER/RANGE RECEPTACLES
GFCI (15A-125V & 20A-125V) Standard - TR - WR
20 AMP - Single Receptacle (120V & 250V)
30A-125V/250V - Dryer Receptacle
50A-125V/250V - Range Receptacle
UL943 & UL498 Standards listed, CSA Certified.
PAGE 14-17
VOICE/DATA & AUDIO/VIDEO
Wallplate TV & Phone
Designer TV & Phone
Keystone Mounts (1 - 6 ports)
Keystone Jacks (Cat3/RJ11 , Cat 5e, F-Connector)
HDMI & HDMI Keystone PAGE 18-21
UL1863 Standards Certified, ETL listed, CSA Certified.
Decora® is a registered trademark of Leviton Manufacturing Co., Inc.
Cheetah Decora and toggle switches complement any home décor. Matte
finish device and wallplates blend into walls, hide finger prints and offer soft
colors to accent your home. Cheetah switches come in Single Pole, 3-Way,
and 4-Way configurations.
Quickwire slots (#14 wire only) or Side Wire terminals (#10, #12, or #14 wire)
for easy installation.
Built with high strength thermoplastic resins, Cheetah receptacles are heavy
duty and resilient to bending or breaking.
Quickwire slots (#14 wire only) for 15 amp or Side Wire terminals (#10, #12,
or #14 wire) for 20 amp.
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 7
DIMMERS & FAN SPEED CONTROLS 600W/60 Hz Rotary
600W/60 Hz Slide Dimmers w/ preset (1 pole & 3 Way)
600W/60 Hz Smart Toggle Pre-Set Dimmer (1 pole)
PAGE 22 - 25
UL1472 Standards Certified, ETL listed, CSA Certified.
SCREWLESS WALLPLATES
Screwless Wallplates
Unbreakable Thermoplastic Resins - Matte finish.
PAGE 26 - 29
UL514C Standards Certified, ETL listed, CSA Certified.
CHEETAH ELECTRICAL BOXES
1 - 4 Gang Standard Size & Big A (oversize) Boxes
Metal Stud Boxes (1 - 4 gang) w/ screws
Cut-In / Work boxes (1 - 2 gang & datacom)
Plaster/Mud Rings (fits 4” square metal boxes)
PAGE 30 - 33
UL514-C Standards Certified, ETL listed, CSA Certified.
CHEETAH ACCESSORIES
Lampholders (Keyless, Pull Chain)
Speed Anchors
Universal Adapter Rings (retro standard screw devices)
Blank Wallplate Adapter (for blank wallplates)
Weatherproof Covers PAGE 34 - 35
UL514-C Standards Certified, ETL listed, CSA Certified.
Cheetah slide and toggle dimmers complement any home décor. Matte finish
(devices and wallplates) blend into walls, hide finger prints, and offer soft
colors to accent your home.
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 8
Toggle & Designer Switches
DESCRIPTION CATALOG # COLOR
Single Pole Toggle Switch 15-AMP 6000-C0A ALMOND
No Ground - See Appendix A 6000-C0E BLACK
15A-120VAC 6000-C0T L ALMOND
6000-C0I IVORY
6000-C0W WHITE
Three Way Toggle Switch 15-AMP 6010-C0A ALMOND
No Ground - See Appendix A 6010-C0E BLACK
15A-120VAC 6010-C0T L ALMOND
6010-C0I IVORY
6010-C0W WHITE
Four Way Toggle Switch 15-AMP 6020-C0A ALMOND
No Ground - See Appendix A 6020-C0E BLACK
15A-120VAC 6020-C0T L ALMOND
6020-C0I IVORY
6020-C0W WHITE
DESCRIPTION CATALOG # COLOR
Single Pole Decora Switch 15-AMP 6030-C0A ALMOND
No Ground - See Appendix A 6030-C0E BLACK
15A-120VAC 6030-C0T L ALMOND
6030-C0I IVORY
6030-C0W WHITE
Three Way Decora Switch 15-AMP 6040-C0A ALMOND
No Ground - See Appendix A 6040-C0E BLACK
15A-120VAC 6040-C0T L ALMOND
6040-C0I IVORY
6040-C0W WHITE
Four Way Decora Switch 15-AMP 6050-C0A ALMOND
No Ground - See Appendix A 6050-C0E BLACK
15A-120VAC 6050-C0T L ALMOND
6050-C0I IVORY
6050-C0W WHITE
ELECTRICAL
Dielectric Voltage: Withstands 1500V minimum
Operating Voltage: 120 - 277VAC
Overload: Minimum 4.8 times rated current for 100 cycles
Current Interrupting: Certified for current interrupting at full-rated current
Temperature Rise: Max 30 Deg C. at full-rated current after 50 cycles
Endurance: 50,000 cycles minimum, resistive, inductive, tungsten filament lamp
load (Fed Spec.)
MECHANICAL
Terminal Identification: UL20 - Brass (hot), Black (hot)
Terminal Size: #14 - #10 AWG Copper Conductor Only
Product ID: Ratings marked permanently on device
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Max continuous +60 Deg C; Min -40 Deg C.
STANDARDS & CERTIFICATIONS
NEMA WD-1 & WD-6, ANSI C-73, UL 20, CSAC22.2 No.111
RESIDENTIAL CONSTRUCTION GRADE SWITCHES - SIDE & QUICKWIRE
Rated: 15A-120/277VAC Standard UL 20, Standard CSA-C22.2 No. 111 – General Use Switches
4.20”
4.20”
1.77”
.880”
1.19”
Patented 1-Step Screwless
Wallplate Snap-In Holes
Thermoplastic Resin Unbreakable
- Resiliant (does not bend)
Matte Finish - Non-Gloss
6/32 Tri-Drive Screw holds Cheetah
Speed Anchor
- Standard Vertical
Adjustment (crooked
box/stud installation)
- Remove to service
device (speed anchor
stays in box)
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 9
Decora & Toggle Switches
DESCRIPTION CATALOG # COLOR
Single Pole Toggle Switch 54524-C0T L ALMOND
SPEC/COMMERCIAL GRADE 54524-C0I IVORY
20A-120/277VAC 54524-C0W WHITE
Three Way Toggle Switch 54523-C0T L ALMOND
SPEC/COMMERCIAL GRADE 54523-C0I IVORY
20A-120/277VAC 54523-C0W WHITE
DESCRIPTION CATALOG # COLOR
Single Pole Decora Switch 05621-C0T L ALMOND
SPEC/COMMERCIAL GRADE 05621-C0I IVORY
05621-C0W WHITE
Three Way Decora Switch 05623-C0T L ALMOND
SPEC/COMMERCIAL GRADE 05623-C0I IVORY
20A-120/277VAC 05623-C0W WHITE
ELECTRICAL
Dielectric Voltage: Withstands 1500V minimum
Maximum Working Voltage: 277VAC
Overload: Minimum 4.8 times rated current for 100 cycles
Current Interrupting: Certified for current interrupting at full-rated current
Temperature Rise: Max 30 Deg C. at full-rated current after 50 cycles
Endurance: 50,000 cycles minimum, resistive, inductive, tungsten filament lamp
load (Fed Spec.)
MECHANICAL
Terminal Identification: UL20 - Brass (hot), Black (hot)
Terminal Size: #14 - #10 AWG Copper Conductor Only
Product ID: Ratings marked permanently on device
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Max continuous +60 Deg C; Min -40 Deg C.
STANDARDS & CERTIFICATIONS
NEMA WD-1 & WD-6, ANSI C-73, UL 20, CSAC22.2 No.111
COMMERCIAL/SPEC GRADE SWITCHES
Rated: 20A-120/277V Standard UL 20, Standard CSA-C22.2 No. 111 – General Use Snap Switches
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 10
Decora & Toggle Combination Switches
DESCRIPTION CATALOG # COLOR
Single Pole Toggle Combination Switch 6200-C0T L ALMOND
15A-120VAC 6200-C0I IVORY
6200-C0W WHITE
SWITCH WIRE DIAGRAM
ELECTRICAL
Dielectric Voltage: Withstands 1500V minimum
Maximum Working Voltage: 277VAC
Overload: Minimum 4.8 times rated current for 100 cycles
Current Interrupting: Certified for current interrupting at full-rated current
Temperature Rise: Max 30 Deg C. at full-rated current after 50 cycles
Endurance: 50,000 cycles minimum, resistive, inductive, tungsten filament lamp
load (Fed Spec.)
MECHANICAL
Terminal Identification: UL20 - Brass (hot), Black (hot)
Terminal Size: #14 - #10 AWG Copper Conductor Only
Product ID: Ratings marked permanently on device
STANDARDS & CERTIFICATIONS
NEMA WD-1 & WD-6, ANSI C-73, UL 20, CSAC22.2 No.111
RESIDENTIAL GRADE COMBINATION SWITCHES - SIDE & QUICKWIRE
Rated: 15A-120/277VAC Standard UL 20, Standard CSA-C22.2 No. 111 – General Use Snap Switches
Cheetah-enabled with
speed anchors
Ground screw location for
stack switches
Tapped screw hole for
standard wallplates
Break-off Split-circuit Tab
Universal Adapter Ring fastened
to Combination Switch w/ Cheetah
Speed Anchors.using 6/32 Tri-drive
screws
4.20”
1.77”
DESCRIPTION CATALOG # COLOR
Single Pole Decora Combination Switch 01754-C0T L ALMOND
Individual Switches: 15A-120VAC 01754-C0I IVORY
Device Total: 20A-120V 01754-C0W WHITE
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 11
DESCRIPTION CATALOG # COLOR
Duplex Receptacle 7000-C0A ALMOND
15A-125V 7000-C0E BLACK
7000-C0T L ALMOND
7000-C0I IVORY
7000-C0W WHITE
Duplex Receptacle 0CR20-C0L L ALMOND
20A-125V 0CR20-C0I IVORY
0CR20-C0W WHITE
Decora Receptacle 7020-C0A ALMOND
15A-125V 7020-C0E BLACK
7020-C0T L ALMOND
7020-C0I IVORY
7020-C0W WHITE
Decora Receptacle 16342-C0L L ALMOND
20A-125V 16342-C0I IVORY
16342-C0W WHITE
Designer & Duplex Receptacles
ELECTRICAL
Dielectric Voltage: Withstands 2000V minimum
Maximum Working Voltage: 120VAC
Current Interrupting: Certified for current interrupting at full-rated current
Temperature Rise: Max 30 Deg C. at full-rated current after 50 cycles
MECHANICAL
Terminal Identification: UL498 - Brass (hot), White (neutral), Green (ground)
Terminal Size: #14 - #10 AWG Copper Conductor Only
Product ID: Ratings marked permanently on device
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Max continuous +60 Deg C; Min -40 Deg C.
STANDARDS & CERTIFICATIONS
NEMA WD-6, ANSI C-73, UL 498, CSAC22.2 No.42
RESIDENTIAL GRADE RECEPTACLES - SIDE & QUICKWIRE
Rated: 15A and 20A-125V Standard UL 498, Standard CSA-C22.2 No. 42.2
Patented 1-Step Screwless
Wallplate Snap-In Holes
Thermoplastic Resin Unbreakable
- Resiliant (does not bend)
Tapped screw hole for
standard wallplates Break-off Split-circuit Tab
Matte Finish - Non-Gloss
6/32 Tri-drive Screw holds Cheetah
Speed Anchor
- Standard Vertical
Adjustment (crooked
box/stud installation)
- Remove to service
device (speed anchor
stays in box)
4.20”
1.77”
.900”
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 12
Tamper Resistant Receptacles
ELECTRICAL
Dielectric Voltage: Withstands 2000V minimum
Maximum Working Voltage: 120VAC
Current Interrupting: Certified for current interrupting at full-rated current
Temperature Rise: Max 30 Deg C. at full-rated current after 50 cycles
MECHANICAL
Terminal Identification: UL498 - Brass (hot), White (neutral), Green (ground)
Terminal Size: #14 - #10 AWG Copper Conductor Only
Product ID: Ratings marked permanently on device
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Max continuous +60 Deg C; Min -40 Deg C.
STANDARDS & CERTIFICATIONS
NEMA WD-6, ANSI C-73, UL 498, CSAC22.2 No.42
DUPLEX & DESIGNER RESIDENTIAL GRADE RECEPTACLES - 2008 NEC COMPLIANT
Rated: 15A and 20A-125V Standard UL 498, Standard CSA-C22.2 No. 42.2
2008 NEC TAMPER RESISTANT RECEPTACLES
Tamper Resistant Receptacles protect children from electrical injuries due to inserting foreign objects into receptacles. A shutter mecha-
nism inside the receptacle blocks access to the contacts unless a two-prong plug is inserted. Our TR Receptacles meet the 2008 NEC
Code, Section 406.11, specifying that all 15A and 20A receptacles installed in dwelling units in accordance with Section 210.52 be listed
tamper-resistant. The TR symbol on the receptacle face assures compliance.
DESCRIPTION CATALOG # COLOR
TR Duplex Receptacle T5320-C0E BLACK
15A-125V T5320-C0T L ALMOND
T5320-C0I IVORY
T5320-C0W WHITE
TR Duplex Receptacle TBR20-C0E BLACK
20A-125V TBR20-C0T L ALMOND
TBR20-C0I IVORY
TBR20-C0W WHITE
DESCRIPTION CATALOG # COLOR
TR Decora Receptacle T5325-C0E BLACK
15A-125V T5325-C0T L ALMOND
T5325-C0I IVORY
T5325-C0W WHITE
TR Decora Receptacle TDR20-C0E BLACK
20A-125V TDR20-C0T L ALMOND
TDR20-C0I IVORY
TDR20-C0W WHITE
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 13
Weather & Tamper Resistant Receptacles
ELECTRICAL
Dielectric Voltage: Withstands 2000V minimum
Maximum Working Voltage: 120VAC
Current Interrupting: Certified for current interrupting at full-rated current
Temperature Rise: Max 30 Deg C. at full-rated current after 50 cycles
MECHANICAL
Terminal Identification: UL498 - Brass (hot), White (neutral), Green (ground)
Terminal Size: #14 - #10 AWG Copper Conductor Only
Product ID: Ratings marked permanently on device
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Max continuous +60 Deg C; Min -40 Deg C.
STANDARDS & CERTIFICATIONS
NEMA WD-6, ANSI C-73, UL 498, CSAC22.2 No.42
DUPLEX RESIDENTIAL GRADE TR/WR RECEPTACLES - 2008 NEC COMPLIANT
Rated: 15A and 20A-125V Standard UL 498, Standard CSA-C22.2 No. 42.2
DESCRIPTION CATALOG # COLOR
TR/WR Duplex Receptacle W5320-TCT L ALMOND
15A-125V W5320-TCI IVORY
W5320-TCW WHITE
TR/WR Decora Receptacle W5325-TCT L ALMOND
15A-125V W5325-TCI IVORY
W5325-TCW WHITE
2008 NEC TAMPER RESISTANT & WEATHER RESISTANT RECEPTACLES
Tamper Resistant Receptacles protect children from electrical injuries due to inserting foreign objects into receptacles. A shutter mecha-
nism inside the receptacle blocks access to the contacts unless a two-prong plug is inserted. Our TR Receptacles meet the 2008 NEC
Code, Section 406.11, specifying that all 15A and 20A receptacles installed in dwelling units in accordance with Section 210.52 be listed
tamper-resistant. The TR symbol on the receptacle face assures compliance.
Tamper/Weather Resistant Receptacles meet UL 498 requirements as well as Sections 406.8 (weather resistant) and 406.11 (tamper
resistant) of the 2008 NEC Code. Built of UV stabilized thermoplastic with high cold impact resistance, they’re ideal in damp or wet loca-
tions. The WR symbol on receptacle face and TR symbol on straps assure compliance.
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 14
GFCI Receptacles
ELECTRICAL
Dielectric Voltage: Withstands 1500V minimum
Maximum Working Voltage: 120 VAC
Current Interrupting: Certified for current interrupting at full-rated current
Temperature Rise: Max 30 Deg C. at full-rated current after 50 cycles
MECHANICAL
Terminal Identification: UL498 - Brass (hot), White (neutral), Green (ground)
Terminal Size: #14 - #12 AWG Copper Conductor Only
Product ID: Ratings marked permanently on device
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Max continuous +60 Deg C; Min -40 Deg C.
STANDARDS & CERTIFICATIONS
NEMA WD-6, ANSI C-73, UL498, CSAC22.2 No.42
GFCI RECEPTACLES
Rated: 15A and 20A-125V Standard UL 498, UL 943 GFCI Standard CSA-C22.2 No. 42.2
DESCRIPTION CATALOG # COLOR
GFCI with LED Indicator Light (NEMA 5-15R) 7599-C0E BLACK
7599-C0T L ALMOND
7599-C0I IVORY
7599-C0W WHITE
GFCI with LED Indicator Light (NEMA 5-20R) 7899-C0E BLACK
7899-C0T L ALMOND
7899-C0I IVORY
7899-C0W WHITE
Features and Benefits
* Automatically test the GFCI every time the RESET button is pushed in. The GFCI will not reset if the GFCI circuit in not functioning
properly.
* By blocking reset of the GFCI if protection has been compromised, SmartLockPRO® reduces the possibility of end-users incorrectly
assuming that a reset GFCI outlet is providing ground fault protection when it actually is not.
* A line-load reversal diagnostic feature is provided which prevents the GFCI from being reset and stops power from being fed to the GFCI
receptacle face or through to downstream devices. A green LED indicator on the GFCI’s face also illuminates to alert the installer to the
line-load wiring reversal.
* The trip latch mechanism in SmartLockPro GFCIs is a one piece “T” design for efficient operation
* There are 4 sets of contacts for load terminals and face. SmartLockPRO GFCIs use a patented bifurcated bridge contact for efficient
operation
* Trip threshold meets or exceeds UL requirements for tripping time
* Improved immunity to high-frequency noise reduces nuisance tripping
SmartLockPRO® is a registered trademark of Leviton Manufacturing Co., Inc.
15A-125V @
Receptacle, 20A-125V
Feed Through
20A-125V @
Receptacle, 20A-125V
Feed Through
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 15
GFCI Receptacles - Tamper Resistant & Weather Resistant
ELECTRICAL
Dielectric Voltage: Withstands 2000V minimum
Maximum Working Voltage: 120 VAC
Current Interrupting: Certified for current interrupting at full-rated current
Temperature Rise: Max 30 Deg C. at full-rated current after 50 cycles
MECHANICAL
Terminal Identification: UL498 - Brass (hot), White (neutral), Green (ground)
Terminal Size: #14 - #10 AWG Copper Conductor Only
Product ID: Ratings marked permanently on device
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Max continuous +60 Deg C; Min -40 Deg C.
STANDARDS & CERTIFICATIONS
NEMA WD-6, ANSI C-73, UL 498, CSAC22.2 No.42
TR/WR GFCI RECEPTACLES - 2008 NEC COMPLIANT
Rated: 15A and 20A-125V Standard UL 498, UL 943 GFCI Standard CSA-C22.2 No. 42.2
DESCRIPTION CATALOG # COLOR
Tamper-Resistant GFCI with LED Indicator Light T7599-C0E BLACK
15A - (NEMA 5-15 R) T7599-C0T L ALMOND
T7599-C0I IVORY
T7599-C0W WHITE
Tamper-Resistant GFCI with LED Indicator Light T7899-C0E BLACK
20A - (NEMA 5-20 R) T7899-C0T L ALMOND
T7899-C0I IVORY
T7899-C0W WHITE
DESCRIPTION CATALOG # COLOR
Tamper-Resistant GFCI with LED Indicator Light W7599-TCE BLACK
15A - (NEMA 5-15 R) W7599-TCW WHITE
Weather-Resistant - OUTDOOR GRADE
Tamper-Resistant GFCI with LED Indicator Light W7899-TCE BLACK
20A - (NEMA 5-20 R) W7899-TCW WHITE
Weather-Resistant - OUTDOOR GRADE
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 16
DESCRIPTION CATALOG # COLOR
30A-125/250V Receptacle 278-C Stainless Steel
(NEMA 14-30R) - CU & AL Rated
Stainless Steel Wallplate included
DESCRIPTION CATALOG # COLOR
50A-125/250V Receptacle 279-C Stainless Steel
(NEMA 14-50R) - CU & AL Rated
Stainless Steel Wallplate included
DRYER / RANGE RECEPTACLES
ELECTRICAL
Dielectric Voltage: Withstands 2000V minimum
Maximum Working Voltage: 208/240 VAC
Current Interrupting: Certified for current interrupting at full-rated current
Temperature Rise: Max 30 Deg C. at full-rated current after 50 cycles
MECHANICAL
Terminal Identification: UL498 - Brass (hot), White (neutral), Green (ground)
Terminal Size: Up to 4AWG Copper Conductor Only
Product ID: Ratings marked permanently on device
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Max continuous +60 Deg C; Min -40 Deg C.
STANDARDS & CERTIFICATIONS
NEMA WD-6, ANSI C-73, UL 498, CSAC22.2 No.42
DRYER/RANGE & SIMPLEX RECEPTACLES
Dryer/Range Rated: 30A and 50A-125/250V Standard UL 498 Standard CSA-C22.2 No. 42.2
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 17
DESCRIPTION CATALOG # COLOR
Tamper-Resistant Single Receptacle T5015-C0T L ALMOND
Screwless Wallplate Included
15A-125V T5015-C0I IVORY
T5015-C0W WHITE
DESCRIPTION CATALOG # COLOR
Tamper-Resistant Single Receptacle T5801-C0T L ALMOND
Screwless Wallplate Included
20A-125V T5801-C0I IVORY
T5801-C0W WHITE
DESCRIPTION CATALOG # COLOR
Single Receptacle 5461-C0T L ALMOND
Screwless Wallplate Included
20A - 250V 5461-C0I IVORY
5461-C0W WHITE
SINGLE RECEPTACLES
ELECTRICAL
Dielectric Voltage: Withstands 2000V minimum
Maximum Working Voltage: 120 VAC
Current Interrupting: Certified for current interrupting at full-rated current
Temperature Rise: Max 30 Deg C. at full-rated current after 50 cycles
MECHANICAL
Terminal Identification: UL498 - Brass (hot), White (neutral), Green (ground)
Terminal Size: Up to 4AWG Copper Conductor Only
Product ID: Ratings marked permanently on device
STANDARDS & CERTIFICATIONS
NEMA WD-6, ANSI C-73, UL 498, CSAC22.2 No.42
SINGLE RECEPTACLES 120V & 250V
Rated: 15A and 20A-120V and 250V Standard UL 498 Standard CSA-C22.2 No. 42.2
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 18
Data & Audio Solutions
ELECTRICAL
Current Interrupting: Meets FCC Part 68 - UL 1863
Temperature Rise: Max 30 Deg C. at full-rated current after 50 cycles
MECHANICAL
Terminal Identification: T568A and T568B wiring patterns
Wiring Fully compliant with published TIA-568-C0A requirements
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Max continuous +60 Deg C; Min -40 Deg C.
STANDARDS & CERTIFICATIONS
NEMA WD-6, ANSI C-73, UL 498, CSAC22.2 No.42
WALLPLATE TELEPHONE/COAX
UL 1846 Standard - Low Voltage Data Communications
WALLPLATE TELEPHONE AND COAX DEVICES
DESCRIPTION CATALOG # COLOR
Wallplate Telephone Jack CH249-00T L ALMOND
CH249-00I IVORY
CH249-00W WHITE
Wallplate Coax Cable Jack CH281-00T L ALMOND
CH281-00I IVORY
CH281-00W WHITE
Wallplate Telephone / Coax Jack CH259-00T L ALMOND
CH259-00I IVORY
CH259-00W WHITE
High Quality Screw Connectors
Easy Wire Openings
High Strength Wire Fittings
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 19
Data & Audio Solutions
DESIGNER TELEPHONE/COAX
UL 1846 Standard - Low Voltage Data Communications
DESIGNER TELEPHONE AND COAX DEVICES
DESCRIPTION CATALOG # COLOR
Designer Telephone Jack CH149-00A ALMOND
CH149-00E BLACK
CH149-00T L ALMOND
CH149-00I IVORY
CH149-00W WHITE
Designer Coax Cable Jack CH181-00A ALMOND
CH181-00E BLACK
CH181-00T L ALMOND
CH181-00I IVORY
CH181-00W WHITE
Designer Telephone / Coax Jack CH159-00A ALMOND
CH159-00E BLACK
CH159-00T L ALMOND
CH159-00I IVORY
CH159-00W WHITE
Datacom Box Installations
Low Voltage Cut-In Bracket Assembled
Item# 4007C
Low Voltage / High Voltage Divider
Item# 4003C (Standard Box)
Item# 4004C (Big A Box)
Datacom Nail-on Box
Item# 3005C
** REQUIRES A DESIGNER WALLPLATE (ITEM# SJ26C)
+ =
Item#: SJ26C
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 20
Data & Audio Solutions
KEYSTONE JACKS - SNAP-IN CONNECTORS
DESCRIPTION CATALOG # COLOR
Cat 3 - RJ11 Telephone 41108-RW3 WHITE
41108-RT3 L ALMOND
41108-RI3 IVORY
Cat 5e Snap-In Jack 5G108-RW5 WHITE
4-Pair - 8 wire conductor Category 5e
T568A and T568B wiring patterns 5G108-RT5 L ALMOND
5G108-RI5 IVORY
F-Connector/Coax 41084-FWF WHITE
Nickel Plated, Feedthrough 41084-FTF L ALMOND
41084-FIF IVORY
KEYSTONE MOUNT DEVICES
DESCRIPTION CATALOG # COLOR
1 Port Datacom Keystone Mount 5000C-C0A ALMOND
5000C-C0B BLACK
5000C-CAL L ALMOND
5000C-C0I IVORY
5000C-C0W WHITE
2 Port Datacom Keystone Mount 5010C-C0A ALMOND
5010C-C0B BLACK
5010C-CAL L ALMOND
5010C-C0I IVORY
5010C-C0W WHITE
3 Port Datacom Keystone Mount 5020C-C0A ALMOND
5020C-C0B BLACK
5020C-CAL L ALMOND
5020C-C0I IVORY
5020C-C0W WHITE
4 Port Datacom Keystone Mount 5030C-C0A ALMOND
5030C-C0B BLACK
5030C-CAL L ALMOND
5030C-C0I IVORY
5030C-C0W WHITE
6 Port Datacom Keystone Mount 5040C-C0A ALMOND
5040C-C0B BLACK
5040C-CAL L ALMOND
5040C-C0I IVORY
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 21
Data & Audio Solutions
ELECTRICAL
Type A HDMI connector (19 pins)
Support all SDTV, EDTV and HDTV modes
HDMI Port Dimensions: 13.9 mm wide by 4.45 mm high.
Type A is electrically compatible with single-link DVI-D
MECHANICAL
The Type A HDMI connector supports up to 165MHz of video bandwidth at 24 bits per pixel. The audio
format can support stereo, surround sound, and up to eight channels of one bit audio.
HDMI - HIGH DEFINITION MEDIA INTERFACE W/KEYSTONE PORTS
UL 1846 Standard - Low Voltage Data Communications
DESIGNER HDMI/KEYSTONE
DESCRIPTION CATALOG # COLOR
Designer HDMI Connector 5170C-CAL L ALMOND
5170C-C0I IVORY
5170C-C0W WHITE
Designer HDMI w/ 4 Port Keystone 5180C-CAL L ALMOND
5180C-C0I IVORY
5180C-C0W WHITE
PIN SIGNAL
1 TMDS Data2+
2 TMDS Data2 Shield
3 TMDS Data2–
4 TMDS Data1+
5 TMDS Data1 Shield
6 TMDS Data1–
7 TMDS Data0+
8 TMDS Data0 Shield
9 TMDS Data0–
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock–
13 CEC
14 RESERVED
15 SCL
16 SDA
17 DDC/CEC Ground
18 +5 V Power
19 Hot Plug Detect
TYPE A CONNECTOR PIN OUT
GOLD PLATED HIGH DEFINITION HDMI CONNECTOR
IDEAL MULTI-MEDIA/GAMING PORT
Back of HDMI Connector
19 Pin HDMI - Front Connector
Gold Plated
Cheetah HDMI w/Keystone Mounts offer
flexibility in a single gang installation for
HDMI, component and composite video
configurations ideal for a classly screwless
look. Ideal for a universal gaming solution.
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 22
Lighting Controls - TOGGLE DIMMERS
ELECTRONIC SMART PRE-SET DIMMERS- 600W - 60HZ
Rated: 120V - 60 Hz Standard UL 1472 Standard CSA-C22.2 No. 184.1
DESCRIPTION CATALOG # COLOR
Smart Toggle Dimmer - Single Pole 6250-C0T L ALMOND
6250-C0I IVORY
6250-C0W WHITE
ELECTRICAL
Voltage: 120 Volt AC - 60 Hz
Load Type: Incandescent
Load Rating: 600 Watts
Filtering: Radio Frequency Interference Filtering
De-Rating: Finned Aluminum Tabbed - 600W/500W/400W
Pre-Set: Electronic
Construction: Printed Solid-State Circuit Board
MECHANICAL
Size: Fits single and multi-gang NEMA wall boxes)
Wiring: 6” color-coded Leads Pre-Stripped - 16 gauge
Heat Sink: Wide Mount Aluminum Fins
Back Body: Unbreakable ABS
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Indoor Use Only
STANDARDS & CERTIFICATIONS
NEMA WD-6, ANSI C-73, UL 1472, CSAC22.2 No. 184.1
HOW IT WORKS
Designed to look like a standard switch! NO more ugly slides to clean or look at!
Black / Line
Red
Green
Dimmer
L
Insulated wires connect to Line (usually black) and load
(light).
1. Connect green dimmer ground wire to bare copper
ground in outlet box.
2. Fasten black dimmer wire to black/line wire.
3. Fasten Red dimmer wire to remaining wire (load).
ON/OFF (energy efficient)
- Lights Ramp UP Slowly to Smart Set
- Lights Ramp DOWN Slowly
DIM LIGHTS (no ugly slide)
- Hold/Press toggle switch in UP position
- Lights cycle through the dimmer range
- SMART SET: Release Toggle Switch at desired smart setting
STYLE & QUALITY
- Matte finish (no glossy fingerprints)
- SCREWLESS Wallplate Included
- Easy to Clean (dishwasher safe)
- High Strength Lexan Resin
- UL Standards Tested
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 23
DESCRIPTION CATALOG # COLOR
Smart Toggle Dimmer - Single Pole 6250-C0T L ALMOND
6250-C0I IVORY
6250-C0W WHITE
Lighting controls - FAN SPEED CONTROL & OCCUPANCY SENSOR
DESCRIPTION CATALOG # COLOR
Fan Speed Control - Quiet with LED locator IPF01-CLZ WHITE
Ivory & Light
Almond
Included.
1.5A - 120VAC 1 Pole & 3 Way Configuration
Color White with Light Almond and Ivory color kits included
DESCRIPTION CATALOG # COLOR
Occupancy Sensor, 1800W@120VAC - 60Hz IPP15-C0L L ALMOND
Single Pole & 3 Way Configuration IPP15-C0I IVORY
180 Degree field-of-view 900 sq ft coverage IPP15-C0W WHITE
California Title 24 compliant
Passive Infrared - Time Adjustment: 30s - 30m
ELECTRICAL
Filtering: Radio Frequency Interference Filtering
Pre-Set: Electronic
Construction: Printed Solid-State Circuit Board
MECHANICAL
Size: Fits single and multi-gang NEMA wall boxes)
Heat Sink: Wide Mount Aluminum Fins
Back Body: Unbreakable ABS
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Indoor Use Only
STANDARDS & CERTIFICATIONS
NEMA WD-6, ANSI C-73, UL 1472, CSAC22.2 No. 184.1
FAN SPEED CONTROL & OCCUPANCY SENSOR
Rated: 1.5A - 120VAC Standard UL 1472 Standard CSA-C22.2 No. 184.1
Neutral Required
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 24
Lighting Controls - Dimmers
ELECTRICAL
Voltage: 120 Volt AC - 60 Hz
Load Type: Incandescent
Load Rating: 700 Watts
Filtering: Radio Frequency Interference Filtering
De-Rating: Finned Aluminum Tabbed - 600W/500W/400W
Pre-Set: On/Off
Construction: Printed Solid-State Circuit Board
MECHANICAL
Size: Fits single and multi-gang NEMA wallboxes
Wiring: 6” color-coded Leads Pre-Stripped - 16 gauge
Heat Sink: Wide Mount Aluminum Fins
Back Body: Unbreakable ABS
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Indoor Use Only
STANDARDS & CERTIFICATIONS
NEMA WD-6, ANSI C-73, UL 1472, CSAC22.2 No. 184.1
SLIDE DIMMER WITH PRE-SET & LED - 600W - 60HZ
Rated: 120V - 60 Hz Standard UL 1472 Standard CSA-C22.2 No. 184.1
DESCRIPTION CHEETAH COLOR
Slide Dimmer w/ Pre-set & LED - Single Pole 6110-C0A ALMOND
UL Listings: 60950, 60950-1, 60950-21 6110-C0E BLACK
6110-C0T L ALMOND
6110-C0I IVORY
6110-C0W WHITE
DESCRIPTION CHEETAH COLOR
Slide Dimmer w/ Pre-set & LED - 3 Way 6120-C0A ALMOND
UL Listings: 60950, 60950-1, 60950-21 6120-C0E BLACK
6120-C0T L ALMOND
6120-C0I IVORY
6120-C0W WHITE
DESCRIPTION CHEETAH COLOR
Slide Dimmer w/ Pre-set - Single Pole 6100-C0A ALMOND
UL Listings: 60950, 60950-1, 60950-21 6100-C0E BLACK
6100-C0T L ALMOND
6100-C0I IVORY
6100-C0W WHITE
DESCRIPTION CHEETAH COLOR
Slide Dimmer - Single Pole 6090-C0A ALMOND
UL Listings: 60950, 60950-1, 60950-21 6090-C0E BLACK
6090-C0T L ALMOND
6090-C0I IVORY
6090-C0W WHITE
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 25
Lighting Controls - Dimmers
ELECTRICAL
Voltage: 120 Volt AC - 60 Hz
Load Type: Incandescent
Load Rating: 600 Watts
Filtering: Radio Frequency Interference Filtering
De-Rating: Finned Aluminum Tabbed - 600W/500W/400W
Pre-Set: On/Off
Construction: Printed Solid-State Circuit Board
MECHANICAL
Wiring: 6” color-coded Leads Pre-Stripped - 16 gauge
Heat Sink: Wide Mount Aluminum Fins
ENVIRONMENTAL
Flammability: UL94 V2
Operating Temp: Indoor Use Only
ROTARY DIMMER - SINGLE POLE - 600W - 60HZ
Rated: 120V - 60 Hz Standard UL 1472 Standard CSA-C22.2 No. 184.1
CHEETAH COLOR
6060-C0A ALMOND
6060-C0E BLACK
6060-C0T L ALMOND
6060-C0I IVORY
6060-C0W WHITE
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 26
Screwless Wallplates
DESCRIPTION ITEM # COLOR
1-Gang Toggle Wallplate PJ1C-C0A ALMOND
* unbreakable plastic PJ1C-C0E BLACK
* screwless design PJ1C-C0T L ALMOND
PJ1C-C0I IVORY
PJ1C-C0W WHITE
2-Gang Toggle Wallplate PJ2C-C0A ALMOND
* unbreakable plastic PJ2C-C0E BLACK
* screwless design PJ2C-C0T L ALMOND
PJ2C-C0I IVORY
PJ2C-C0W WHITE
3-Gang Toggle Wallplate PJ3C-C0A ALMOND
* unbreakable plastic PJ3C-C0E BLACK
* screwless design PJ3C-C0T L ALMOND
PJ3C-C0I IVORY
PJ3C-C0W WHITE
4-Gang Toggle Wallplate PJ4C-C0A ALMOND
* unbreakable plastic PJ4C-C0E BLACK
* screwless design PJ4C-C0T L ALMOND
PJ4C-C0I IVORY
PJ4C-C0W WHITE
MECHANICAL
Material: Thermoplastic
Finish: Matte Finish
Colors: Almond, Black, Light Almond, Ivory, White
Resiliance: Unbreakable
ENVIRONMENTAL
Flammability: UL94 V2
STANDARDS & CERTIFICATIONS
NEMA, ANSI, UL 514D, CSAC22.2
SCREWLESS WALLPLATES
Standard UL 514D Standard CSA-C22.2 No.
Patented Cheetah Screwless
Wallplate “One Step” Snap System
Design.
3.16”
4.93”
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 27
Screwless Wallplates
DECORA® WALLPLATES
DESCRIPTION ITEM # COLOR
1-Gang Decora Wallplate SJ26C-C0A ALMOND
* unbreakable plastic SJ26C-C0E BLACK
* screwless design SJ26C-C0T L ALMOND
SJ26C-C0I IVORY
SJ26C-C0W WHITE
2-Gang Decora Wallplate S262C-C0A ALMOND
* unbreakable plastic S262C-C0E BLACK
* screwless design S262C-C0T L ALMOND
S262C-C0I IVORY
S262C-C0W WHITE
3-Gang Decora Wallplate S263C-C0A ALMOND
* unbreakable plastic S263C-C0E BLACK
* screwless design S263C-C0T L ALMOND
S263C-C0I IVORY
S263C-C0W WHITE
4-Gang Decora Wallplate S264C-C0E BLACK
* unbreakable plastic S264C-C0T L ALMOND
* screwless design S264C-C0I IVORY
S264C-C0W WHITE
DUPLEX AND BLANK WALLPLATES
DESCRIPTION ITEM # COLOR
1-Gang Duplex Wallplate PJ8C-C0A ALMOND
* unbreakable plastic PJ8C-C0E BLACK
* screwless design PJ8C-C0T L ALMOND
PJ8C-C0I IVORY
PJ8C-C0W WHITE
2-Gang Duplex Wallplate PJ82C-C0A ALMOND
* unbreakable plastic PJ82C-C0E BLACK
* screwless design PJ82C-C0T L ALMOND
PJ82C-C0I IVORY
PJ82C-C0W WHITE
1-Gang Blank Wallplate PJ13C-C0A ALMOND
* unbreakable plastic PJ13C-C0E BLACK
* screwless design PJ13C-C0T L ALMOND
* use with blank plate adapter PJ13C-C0I IVORY
PJ13C-C0W WHITE
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 28
DESCRIPTION ITEM # COLOR
2-Gang Blank Wallplate PJ23C-C0A ALMOND
* unbreakable plastic PJ23C-C0E BLACK
* screwless design PJ23C-C0T L ALMOND
* use with blank plate adapter PJ23C-C0I IVORY
PJ23C-C0W WHITE
COMBO PLATES - 2-GANG WALLPLATES
DESCRIPTION ITEM # COLOR
2-Gang Toggle/Decora Wallplate P126C-C0A ALMOND
* unbreakable plastic P126C-C0E BLACK
* screwless design P126C-C0T L ALMOND
P126C-C0I IVORY
P126C-C0W WHITE
2-Gang Toggle/Duplex Wallplate PJ18C-C0A ALMOND
* unbreakable plastic PJ18C-C0E BLACK
* screwless design PJ18C-C0T L ALMOND
PJ18C-C0I IVORY
PJ18C-C0W WHITE
2-Gang Duplex/Decora Wallplate P826C-C0A ALMOND
* unbreakable plastic P826C-C0E BLACK
* screwless design P826C-C0T L ALMOND
P826C-C0I IVORY
P826C-C0W WHITE
COMBO PLATES - 3-GANG WALLPLATES
DESCRIPTION ITEM # COLOR
3-Gang Two Toggle/Decora Wallplate P226C-C0A ALMOND
* unbreakable plastic P226C-C0E BLACK
* screwless design P226C-C0T L ALMOND
P226C-C0I IVORY
P226C-C0W WHITE
3-Gang Two Toggle/Duplex Wallplate PJ21C-C0A ALMOND
* unbreakable plastic PJ21C-C0E BLACK
* screwless design PJ21C-C0T L ALMOND
PJ21C-C0I IVORY
PJ21C-C0W WHITE
Screwless Wallplates
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 29
DESCRIPTION ITEM# COLOR
4-Gang Three Toggle/Decora Wallplate 2262C-C0A ALMOND
* unbreakable plastic 2262C-C0E BLACK
* screwless design 2262C-C0T L ALMOND
2262C-C0I IVORY
2262C-C0W WHITE
Screwless Wallplates
ADVANCED ENGINEERING DESIGN
The patented Cheetah screwless wallplates have been
designed to provide exceptional tight fit to Cheetah-
enabled devices using eight (8) specially designed tabs.
Each tab (top and bottom) provide resistance. As many
as 6 tabs may break off and the wallplate still ensures a
snug fit to the wall.
Cheetah wallplates are made from high strength thermo-
plastic for unbreakable quality and stylish matte finish.
Each wallplate is specified to NEMA standards for Third
Party compatability.
2 tabs per Cheetah wallplate opening.
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 30
Wood Stud Box Installations
DESCRIPTION CATALOG #
1-Gang Box 3001C Wire Capacity: #14 - 9, #12 - 8, #10 - 7
* 18 cu Inches Dimensions: 2.25” W x 3.75” H x 2.75” D
1-Gang Big-A Box 3004C Wire Capacity: #14 - 11, #12 - 10, #10 - 9
* 22.2 cu inches Dimensions: 2.25” W x 3.75” H x 3.5” D
1-Gang Datacom Box 3005C Wire Capacity: Low Voltage Wire
* 18 cu inches Dimensions: 2.25” W x 3.75” H x 3.5” D
1-Gang Adjustable Big-A 3023C Wire Capacity: #14 - 11, #12 - 10, #10 - 9
* 22 cu inches Dimensions: 2.25” W x 3.75” H x 3.5” D
2-Gang Box 3006C Wire Capacity: #14 - 17, #12 - 15, #10 - 13, #6 - 6
* 34 cu inches Dimensions: 4.0” W x 3.75” H x 2.75” D
2-Gang Big-A box - - DRYER/RANGE PORT 3007C Wire Capacity: #14 - 20, #12 - 18, #10 - 16, #6 - 6
* 40 cu inches Dimensions: 4.0” W x 3.75” H x 3.5” D
3-Gang Box 3008C Wire Capacity: #14 - 22, #12 - 19, #10 - 17, #6 - 8
* 44 cu inches Dimensions: 5.75” W x 3.75” H x 2.75” D
3-Gang Big-A box 3009C Wire Capacity: #14 - 30, #12 - 28, #10 - 24, #6 - 12
* 58 cu inches Dimensions: 5.75” W x 3.75” H x 3.5” D
4-Gang Box 3010C Wire Capacity: #14 - 30, #12 - 28, #10 - 24, #6 - 14
* 60 cu inches Dimensions: 7.65” W x 3.75” H x 2.75” D
4-Gang Big-A box 3011C Wire Capacity: #14 - 40, #12 - 36, #10 - 32, #6 - 16
* 76 cu inches Dimensions: 7.65” W x 3.75” H x 3.5” D
CHEETAH SPEED BOXES & ACCESSORIES
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 31
Metal Stud Installations
DESCRIPTION CATALOG #
1-Gang Metal Stud Box w/ Self Drilling Metal Screws 3002C Wire Capacity: #14 - 11, #12 - 10, #10 - 9
* 22 cu inches Dimensions: 2.25” W x 3.75” H x 3.5” D
2-Gang Big-A box w/ Self Drilling Metal Screws 3026C Wire Capacity: #14 - 20, #12 - 18, #10 - 16, #6 - 6
* 40 cu inches Dimensions: 4.0” W x 3.75” H x 3.5” D
3-Gang Big-A box w/ Self Drilling Metal Screws 3027C Wire Capacity: #14 - 30, #12 - 28, #10 - 24, #6 - 12
* 58 cu inches Dimensions: 5.75” W x 3.75” H x 3.5” D
4-Gang Big-A box w/ Self Drilling Metal Screws 3028C Wire Capacity: #14 - 40, #12 - 36, #10 - 32, #6 - 16
* 76 cu inches Dimensions: 7.65” W x 3.75” H x 3.5” D
1-Gang Big-A Adjustable w/ Metal Screwss 3025C Wire Capacity: #14 - 11, #12 - 10, #10 - 9
* 22 cu inches Dimensions: 2.25” W x 3.75” H x 3.5” D
1-Gang ½” Mud Ring 3015C
* Fits 4”x4” Square box
1-Gang 5/8” Mud Ring 3016C
* Fits 4”x4” Square box
2-Gang ½” Mud Ring 3017C
* Fits 4”x4” Square box
2-Gang 5/8” Mud Ring 3018C
* Fits 4”x4” Square box
QUESTIONS ANSWERS
Can I use standard screw devices in Cheetah Speed Boxes? Yes! Just insert two Cheetah Speed Anchors (Item #4000C) into the
speed anchor slots of the box and it turns the Cheetah boxes into a
normal outlet box.
How do I adjust a Cheetah device once it has been inserted into
the Speed Anchor Slots (crooked stud installation)?
The Speed Anchors are pre-assembled and fasted to the Cheetah
Device using standard 6/32 screws. Simply loosen fastened screws to
vertically align device and re-tighten to compensate for crooked stud
alignment.
How do you replace a Cheetah device once it has been installed? Unscrew the Cheetah device as any other device. The Speed Anchors
stay in the box. Using a screwdriver, punch the speed anchor through
the slot (it will fall in back of the wall) and simply insert a new Cheetah
device.
Why is a footplate included with all Multi-gang boxes The footplate is adjustable to either 2”x 4” or 2” x 6” depths to butt up
against the opposite wall - allow the multi-gang box to be more rigid for
installation.
What type of screws come with the Metal Stud Boxes? Cheetah Metal Stud Boxes come with 3.25” self drilling metal screws in
the nail sleeves for easy side fastening to metal studs. All metal stud
boxes also have a front flange for screws if needed.
What type boxes do the Mud Rings fasten to? Cheetah 1 & 2-gang mud rings fasten to standard 4” square boxes (metal
or plastic with diagonal screws)
Cheetah Metal Stud
boxes come with metal
self-drilling screws for
side wall installations
and greater stabiliity.
Cheetah Mud Rings
convert 4” square
boxes into Cheetah
speed Boxes..
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 32
DESCRIPTION CATALOG #
3” Ceiling Box 3012C
Ceiling Speed Anchor - 52 MM 4001C
* 100 lbs pull test rated
Lamp Holder - Keyless 4008C
Lamp Holder - Pull-Chain 4009C
Ceiling Installations
Cut-In Box Installations
DESCRIPTION CATALOG #
1-Gang Shallow Cut-In Box 3000C Wire Capacity: #14 - 6 , #12 - 5, #10 - 4
* 14 cu inch Dimensions: 2.5” W x 4.2” H x 2.5” D
1-Gang Cut-In Box 3003C Wire Capacity: #14 - 9, #12 - 8, #10 - 7
* 18 cu inches Dimensions: 2.5” W x 4.2” H x 3.35” D
2-Gang Cut-In Box 3022C Wire Capacity: #14 - 17, #12 - 15, #10 - 13, #6 - 6
*34 cu inches Dimensions: 4.0” W x 3.75” H x 2.75” D
Low Voltage / Datacom Cut-In Bracket 4007C
Cheetah Cut-In
Boxes are 2-Hour
Fire Rated. Screws
self-tighten pop-up
flange to back of
sheet rock.
Low Voltage Cut-In
Bracket is designed to
“zip-tie” to sheet rock
and then brake tabs off
flush with wall.
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 33
DESCRIPTION CATALOG #
1-Gang Datacom Box 3005C Wire Capacity: Low Voltage Wire
* 18 cu inches Dimensions: 2.25” W x 3.75” H x 3.5” D
Mixed Voltage Divider - Standard Box 4003C
* Fits 2, 3 and 4 Standard gang boxes
Mix Voltage Divider - Big A Box 4004C
* Fits 2, 3 and 4 Big-C0A gang boxes
Low Voltage / Datacom Cut-In Bracket 4007C
* Fits directly to wall without stud
DATACOM SOLUTIONS
UL Standard 514C Nail-on Box, Mixed Voltage Dividers (multi-gang installations), Low Voltage Cut-In Bracket
Low Voltage / High Voltage Divider
Item# 4003C (Standard Box)
Item# 4004C (Big A Box)
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 34
1 Gang Spark Ring 3019C
* Protective sleeve
Speed Anchor - 30 MM 4000C
* 50 lb pull test rated
Blank Wallplate Adapter 4005C
* Speed Anchor Attached/Included
Universal Adaptor 4006C
* Adapts most standard devices to receive cheetah screwless wallplates
Device Shims (Spacers) 4010C
* Shims to hold device flush to walls when drywall
is cut too wide.
LAMP HOLDERS - KEYLESS 4008C
LAMP HOLDER - PULL CHAIN 4009C
ACCESSORIES
Spark Rings, Speed Anchor Inserts, Blank Wallplate Adapter, Universal Adapter Ring
1 Gang Universal Spark Ring (Item #3019C) supports multi-gang
installations. Spark Rings are used for extending a protective
sleeve for devices where backsplash or wall to box exceeds 1/4”.
See local NEC requirements for further clarification of use.
Blank Wallplate Adapter is used to insert into a
Cheetah speed box slots to fasten a screwless
Blank wallplate.
The Blank Wallplate Adapter (Item#4005C) and
Blank Wallplates (1-Gang Item#:PJ13C) (2-Gang
Item#:PJ23C) are sold separately. Blank Wallplate Adapter
(Item#:4005C) Blank Wallplate
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 35
WEATHERPROOF COVERS - “CHEETAH ENABLED” SOLUTIONS
UL Standard 514C Covers w/ UL 498 Standard Duplex or GFCI Receptacles (per assembled)
WEATHERPROOF COVERS
UL Standard 514C Covers w/ UL 498 Standard Duplex or GFCI Receptacles (per assembled)
Bubble In Use Cover
Vertical Weatherproof Cover
w/ 15A Duplex
Low Profile In Use Cover
DESCRIPTION RECEPTACLE CATALOG #
Clear Bubble Cover w/ 15 Amp Duplex 15A Duplex 86592-CCL
Clear Bubble Cover w/ 15 Amp GFCI 15A GFCI 86594-CGY
Low Profile Cover w/ 15 Amp Duplex 15A Duplex 86595-CGY
Low Profile Cover w/ 15 Amp GFCI 15A GFCI 86596-CGY
DESCRIPTION RECEPTACLE CATALOG #
Horizontal Weatherproof Cover w/ 15 Amp Duplex - GRAY 15A Duplex 86597-CGY
Vertical Weatherproof Cover w/ 15 Amp Duplex - GRAY 15A Duplex 86598-CGY
Vertical Weatherproof Cover w/ 15 Amp GFCI - GRAY 15A GFCI 86599-CGY
Horizontal Weatherproof Cover
w/ 15A Duplex
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 36
2-Hour Wall Fire Rating Installation Guidelines
Intertek Testing Services NA Ltd., a Nationally Recognized Testing Laboratory (NRTL), has tested and
certied the following Cheetah Nonmetallic Outlet Boxes (UL Standard 514C 3rd Edition) to ASTM E-814
(UL 1479), Standard Method for Fire Tests of Through-Penetration Fire Stops, to qualify for 1- and 2-hour
re rated wall and oor/ceiling installations, Listed to ASTM E119-03, Standard Methods o/Fire Endurance
Tests of Building Construction and Materials.
1-GANG CHEETAH OUTLET BOXES
(18 cubic inch & 22 cubic inch) Minimum horizontal box separation of 5” (inches), within same stud cavity. No minimum
on vertical separation. Back-to-Back installation on common walls within 5” (inches), within
same stud cavity. No additional fire resistive protection required.
2-GANG CHEETAH OUTLET BOXES
(34 cubic inch & 40 cubic inch) Minimum horizontal box separation of 12” (inches), within same stud cavity. No minimum on
vertical separation. Back-to-Back installation on cornmon walls within 12” (inches), within
same stud cavity. Back-to-Back installation requires standard R12 fiberglass batt insulation
in stud cavities.
3-GANG CHEETAH OUTLET BOXES
(44 cubic inch & 60 cubic inch) Minimum horizontal box separation of 16” (inches), within separate stud cavity. No minimum
on vertical separation. Back-to-Back installation on common walls within 16” (inches),
within separate stud cavity. Back-to-Back installation requires standard R12 fiberglass batt
insulation in stud cavities.
4-GANG CHEETAH OUTLET BOXES
(60 cubic inch & 80 cubic inch) Minimum horizontal box separation of 16” (inches), within separate stud cavity. No minimum
on vertical separation. Back-to-Back installation on common walls within 16” (inches), within
separate stud cavity. Requires standard R12 fiberglass batt insulation in stud cavities.
1 & 2-GANG MUD RINGS
(1/2” & 5/8”) For use on metal 4”x 4” Outlet boxes - minimal horizontal and vertical separation
determined by metal box installation guidelines..
1-Hour Fire Floor/Ceiling Rating Installation Guidelines
1-GANG CHEETAH OUTLET BOXES
(18 cubic inch & 22 cubic inch) Floor/ceiling assembly was constructed with 2x10 floor joists, 5/8” plywood sub-floor and two
layers of 1/2” Type X gypsum wallboard ceiling membrane according to ASTM E119-05, Fire
Tests of Building Construction and Materials.
3” CEILING BOXES Floor/ceiling assembly was constructed with 2x10 floor joists, 5/8” plywood sub-floor and two
layers of 1/2” Type X gypsum wallboard ceiling membrane according to ASTM E119-05, Fire
Tests of Building Construction and Materials.
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 37
Appendix A - NO Ground Screw on Cheetah Snap switches
Note: Cheetah USA Wide Plastic Yoke Snap Switches were recently approved/allowed under the 2011 NEC 404.9
The assumptions and premise of the NEC 404.9 stipulations are based upon the use of metal yoke devices. Metal yokes have been the norm for over 40 years (if not longer). All
considerations for grounding the snap switches were in reference to the metal yoke and the possibility of using a metal wall plate attached to the metal yoke that could become
energized. We fully recognize this critical NEC stipulation for metal yokes and use of metal wall plates with metal yokes.
With the introduction of our unique dielectric plastic yoke, we simply have changed the paradigm and assumptions of the present 404.9 code. As with all innovation in technol-
ogy, innovation usually proceeds the current code stipulations and requires proper documentation to all those in authority to evaluate “equivalent safety compliance”. Inspectors
across the nation have recognized that our new innovation of using a plastic yoke for our snap switches changes the fundamental assumptions set forth by the 404.9 stipulations.
We would ask that in evaluating the following considerations, that the entire assumptions and premise of the 404.9 code in relation to metal yoke devices must be re-evaluated
because of our plastic yoke.
1. The Cheetah plastic dielectric strap cannot become energized. It acts similar to the properties of a plastic wire nut. The dielectric strap insulates the terminals and wires on
the back of the device from becoming energized. Our UL laboratory (Intertek) conducted a test of where they placed 4500 volts directly to the plastic strap - no parts on the face
of the plastic yoke and snap switch became energized or had any dielectric breakdown. Our dilemma when we developed the plastic yoke was why would you put a ground screw
on plastic? A similar question was how do you ground a plastic wire nut? After complete UL 20 testing by our laboratory, the overarching question of why put a ground screw on
plastic made us realize that indeed we had discovered a new paradigm to the NEC 404.9 stipulations and introduced a new innovation that changed the 40+ year use of metal
yokes on devices.
2. One question often asked is, “what if someone violates your UL listed product and some how fastened a metal wall plate to the plastic yoke”? Cheetah snap switches contain
NO screw holes to fasten wall plates (metal or non-metallic). Only Cheetah screw-less non-metallic wallplates can be installed to Cheetah snap switches. Each Cheetah snap
switch is clearly marked, “ONLY CHEETAH NON-METALLIC WALLPLATES CAN BE INSTALLED” (per UL listing). To violate the UL listing and the lack of a screw hole requires
significant work effort on the part of the electrician. They would have to accurately mark the location of screw holes, drill a screw hole with the right drill bit size, and then use a
self-tapping screw – normal wall plates screws are not self tapping to fasten the wall plate. While NO manufacturer can stop the illegal installation of their devices, Cheetah has
done everything possible to ensure proper installation. It would require the electrician to spend considerable time and effort (which they do not want to do) to violate our markings
to improperly install a metal wall plate to Cheetah switches contrary to our listings. Again, even if an installation violates our listed product by somehow fastening a metal wall-
plate, the 4500 volt dielectric test conducted by our UL laboratory proves that even with a metal plate fastened to the plastic yoke, the plastic yoke properly insulates and protects
the metal wallplate from becoming energized.
3. Another question asked is “what about the metal screws holding the speed anchors to the plastic yoke”? With a sample of our device and cheetah speed outlet box, you will
notice that the metal screws holding the speed anchors to the device are not exposed inside the cheetah box. They are fully enclosed within the speed anchor “channel” of the
outlet box they are inserted in. There is no metal exposed inside the outlet box.
4. Another question, “since the Cheetah snap switch does not require a ground wire, what about the ground wire in the outlet box?” The provisions of NEC 250.148 (D) require a
ground wire be pulled to every outlet box in the house – this should be fully complied with. Because our snap switch does not require a grounding screw (how do you ground plas-
tic?), it does not mean that electricians should eliminate or terminate the ground wire from the electrical box as stipulated by NEC code. Thus some jurisdictions have specifically
stated that Cheetah snap switches are approved and further clarified that all provisions of NEC 250.148 (D) should be met. We assume with all other manufacturers that standard
NEC wire stipulations are enforced.
5. All Cheetah snap switches have passed the UL 20 standards for general purpose snap switches. The fact that any device or product could be installed contrary to their listing
is self evident. In speaking with numerous inspectors across the nation, many recognize the ground wire is not necessary for switch operation and is only used because of the
metal yoke/metal wall plate installation condition. Cheetah Snap switches have been properly evaluated to the highest UL standards for safety. Because of the innovation of our
plastic yoke, they agree that the stipulations of NEC 404.9 do not apply and that equivalent safety compliance is met.
6. Cheetah has done all we can do to comply with requests for adequate documentation and valid test reports that demonstrate our new paradigm in electrical products. We
recognize that we are the first to introduce innovation in a market where metal yokes have been the standard for many years. We feel that plastic yokes will become the wave of
the future with superior safety features over metal yokes. The fact that we have introduced a new paradigm to the existing 404.9 assumptions (metal yokes and metal wall plates),
should at least allow consideration for our new innovation and not burden us with the assumptions of the old paradigm. Thankfully the NEC does allow for innovation so that
“specific requirements in the code” may be waived or “alternative methods” be employed where “equivalent objectives can be achieved by establishing and maintaining effective
safety” (NEC 90.4). Our unique product meets and in many ways exceeds the equivalent safety objectives set forth. Consideration must be made in light of the fact that our plastic
dielectric straps completely change the paradigm under which 404.9 metal yoke / metal wall plate assumptions were made.
7. Cheetah USA has complied with all respective standards set forth by UL. We rely heavily upon Nationally Recognized Testing Laboratories to validate and ensure strict compli-
ance. The UL 20 certification and subsequent safety reports were performed by our NRTL laboratory (Intertek /SEMKO issues the ETL listing mark). OSHA recognizes multiple
NRTL laboratories for UL certification (see http://www.osha.gov/dts/otpca/nrtl/index.html) We presently use both Underwriting Laboratories and Intertek/SEMKO for our testing
laboratories.
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 38
All Cheetah products have been tested using the most stringent
testing standards following the UL specification through OSHA-
recognized testing laboratories. Using Nationally Recognized
Testing Laboratories (NRTL), the Occupational Safety and Health
Administration (OSHA) and American National Standards Interface
(ANSI) ensures that all products meet and pass minimum require-
ments for safety.
Cheetah USA has chosen to use two National Recognized Testing
Laboratory (NRTL) marks that support the UL specifications. Some
Cheetah USA products have been tested, certified, and listed with
the UL mark, while others have been tested, certified, and listed with
the ETL mark. The important fact is that both testing laboratories
support and enforce the same UL specification and meet all require-
ments of the OSHA standards. Both testing laboratories perform
periodic inspections at manufacturing facilities to ensure compliance
and quality. The UL specification is well defined in the industry and
all Cheetah products are 100% compliant with the UL specification.
DIFFERENCE BETWEEN UL SPECIFICATION –VS- UL
LISTED MARK
The UL specification is independent of testing laboratory or vendor.
Consumers should not be confused with the UL specification and
the UL Listed Mark. All Nationally Recognized Testing Laboratories
(NRTL) use the UL specification in their certification and listing pro-
cedures. Each testing laboratory offers differing levels of customer
services offering to differentiate and compete as testing laboratories,
but each must be 100% compliant with the specifications outlined by
OSHA and ANSI.
UL –VS- ETL LISTING MARKS
As indicated above, there are a number of Nationally Recognized
Testing Laboratories (NRTL) that support the UL specifications.
Each testing organization must be 100% compliant with all regulatory
guidelines and specifications of the UL specification. Marks are
listed by the respective Laboratory who has performed the compli-
ance tests. Regardless of the UL listed mark or the ETL listed mark,
the same UL specification and requirements have been met. Each
laboratory has been approved, monitored, and certified through the
Occupational Safety and Health Administration (OSHA). The Marks
represent the company who performed the UL specification testing.
IS ANY MARK BETTER THAN THE OTHER?
No. The UL specification is the same. While each laboratory has
many key differentiating customer service offerings and features,
the end result to the consumer is that both UL listed marks and ETL
listed marks, in relation to the UL specification, are identical. Each
laboratory must meet the safety standards developed by the American
National Standards Institute (ANSI). Many multi-national companies
such as AT&T, Dell, Ericsson, General Electric, Panasonic, Philips, etc.
use the ETL listed mark. Currently over 20,000 products have been
tested by ETL SEMKO, a National Recognized Testing Laboratory
(NRTL). Many national retailers, such as; JC Penney, Sears, Target,
and others are also using the ETL listed mark.
UL and ETL Certifications
CHEETAH - LEVITON - C O N T R ACTO R G U I D E 2009 39
G-8170/D09-dp-rev
Leviton Manufacturing Co., Inc.
201 North Service Road, Melville, NY 11747-3138
Telephone: 1-800-323-8920 • FAX: 1-800-832-9538
Tech Line (8:30AM-7:30PM E.S.T. Monday-Friday): 1-800-824-3005
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9
Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290
Tel. (+52) 55-5082-1040 • Fax (+52) 55-5386-1797
www.leviton.com.mx
Visit our Website at www.leviton.com
www.cheetahspeed.com
© 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

Navigation menu