Brochure
2016-07-29
: Pdf 1000401852-Brochure 1000401852-Brochure B2 unilog
Open the PDF directly: View PDF 
.
Page Count: 4
PRODUCT DATA
Renoir™ II Architectural Wallbox Dimmers - Thin Heat Sink
Renoir™ II Architectural Wallbox Dimmers
Preset Slide – Thin Heat Sink
The Leviton Renoir™ II line of architectural wallbox
dimmers supports an unparalleled number of
applications using a minimum number of SKUs.
Renoir II high-performance dimmers support all
load types and configurations.
Performance,
aesthetics, multi-location-dimming,
and multi-gang
capabilities make Renoir II a highly functional-yet
elegant solution for architectural dimming control.
FEATURES
• Universal voltage—120-277V (excludes
non-neutral models)
• Multi-location dimming—up to 5-way dimming
- Remote dimmers and switches
- Connect up to 5 devices, max 250’ on one
traveler wire
- Remote control all connected master
dimmers
- Masters always operate independently
• Locator indicator—illuminates when dimmer is
off for easy location in a dark room
• Non-neutral models—for retrofit applications
• Configurable cut-off level—allows user
configuration of cut-off point and automatically
recalibrates to allow maximum control from
cutoff point to full output
• Smooth-action, linear captive slide control—
easy, precise adjustment of lighting levels
- Easy-touch preset switch turns lights ON at
last selected brightness level
• Clean and stylish appearance
- Fits standard commercial 2-1/2” deep
wallboxes*
- Decora® wallplates coordinate with Leviton’s
extensive line of Decora devices
- Fins are easily removed for multi-gang
applications
- No visible metal heat sinks, fins or mounting
hardware
• Solid state triac dimming—saves energy
when dimming, extends lamp life and reduces
maintenance costs
• Flicker-free, smooth, and continuous
dimming—reduces light fluctuations from
line voltage variation and maintains the power
delivered to the lamp
• Power failure memory—light is restored to
the same levels set prior to the power failure or
power interruption
• Surge protection—tested to withstand surges
of 6,000V, 200A (ANSI/IEEE Std. C62.41-1980)
• Electrostatic discharge protection—protects
dimmer against static discharge up to 16,000V
• Advanced technology engineered heat
sinks—transfers heat away from essential
electrical components for extended product life
• Square law dimming—slider position indicates
the perceived light level
• RFI filtering—reduces interference with radio,
audio and video equipment
• Accessible air gap feature—completely
disconnects power from the load when lights are
off for safety when changing lamps (available
on select models; consult factory for additional
details)
* Field configurable multi-gang boxes not supported.
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 fax 800-832-9538
©2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
PRODUCT DATA
Renoir™ II Architectural Wallbox Dimmers - Thin Heat Sink
DIMENSIONS
A
B
C
E
D
A B C D E
Narrow
Dimmer
1.72”
(43.68mm) 5.15”
(130.99mm) 2.89”
(73.43mm) 0.38”
(9.77mm) 1.60”
(40.64mm)
Wide
Dimmer
1.72”
(43.68mm) 5.15”
(130.99mm) 4.70”
(119.40mm) 0.38”
(9.77mm) 1.60”
(40.64mm)
Switch 1.72”
(43.68mm) 5.15”
(130.99mm) 2.89”
(73.43mm) 0.38”
(9.77mm) 1.60”
(40.64mm)
Switch
Remote
1.72”
(43.68mm) 5.15”
(130.99mm) 2.89”
(73.43mm) 0.38”
(9.77mm) 1.10”
(28.10mm)
Dimmer
Remote
1.72”
(43.68mm) 5.15”
(130.99mm) 2.89”
(73.43mm) 0.38”
(9.77mm) 1.10”
(28.10mm)
ENVIRONMENTAL
Operating Temperature 32-104°F (0-40°C)
Storage Temperature 14-185°F (-10-85°C)
Relative Humidity Non-condensing 0-90%
Listings UL/cUL or ETL/cETL listed to UL/CSA standards
(File #E31373 for dimmers, File # E123566 for fans),
meets energy code requirements for Title 24, NOM
certified, ANSI/IEEE C62.42.2—voltage surges to 6,000V
& surges to 200A, ESD protection against damage during
static discharge of 16B or higher
Radio Certifications FCC Part 15, Class B for radiated and conducted
emissions
SPECIFICATIONS
Renoir™ II Architectural Wallbox Dimmers - Thin Heat Sink
ORDERING INFORMATION
For a full Renoir II product list, visit www.leviton.com/renoirII
NOTE: Mark 10® is a registered trademark of Advance Transformer Company
COLOR CHANGE KITS
* Replace x with the following digit depending on color: E=Black, G=Gray, I=Ivory, T=Light Almond, W=White
CAT. NO. DESCRIPTION
AWSCT-00x* Color Change Kits, preset slide—thin heat sink
AWWCT-00x* Color Change Kits, preset switch
Load Type
120V 230V 277V Heat
Sink
Width Cat. No.Load LED Load Load LED Load Load LED Load
Incandescent
(No Neutral)
600W 300W - - - - Narrow AWSMT-IAW
1,000W 500W - - - - Narrow AWSMT-IBW
1,920W 960W - - - - Wide
AWSMG-IDW
NOTE: This is a
standard heat sink
model, which is
thicker than the
other thin models in
this table
Incandescent/
Magnetic
Low Voltage
600W 300W 1,150W 575W 1,385W 692W Narrow AWSMT-MAW
1,000W 500W 1,917W 958W 2,308W 1,154W Narrow AWSMT-MBW
1,500W 750W 2,875W 1,437W 3,463W 1,731W Wide AWSMT-MCW
Fluorescent
0-10V 1,920W 1,920W 3,680W 3,680W 4,432W 4,432W Narrow AWSMT-7DW
Mark 10® or
Lutron 2-Wire
600W - 1,150W - - - Narrow AWSMT-XAW
1,000W - 1,917W - - - Narrow AWSMT-XBW
1,920W - 3,680W - - - Wide AWSMT-XDW
Lutron 3-Wire
600W - 1,150W - - - Narrow AWSMT-HAW
1,000W - 1,917W - - - Narrow AWSMT-HBW
1,920W - 3,680W - - - Narrow AWSMT-HDW
Electronic
Low Voltage
600W 300W 1,150W 575W - 692W Wide AWSMT-EAW
1,000W 500W 1,917W 959W - 1,154W Wide AWSMT-EBW
Fan Speed
Control
600W - 1,150W - - - Narrow AWSMT-QAW
1,000W - 1,917W - - - Narrow AWSMT-QBW
Switch 1,800W 1,800W 3,450W 3450W 4,155W 4,155W Narrow AWWMT-00W
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 fax 800-832-9538
©2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
PRODUCT DATA
G-8279F/F16-tb
REV JUN 16
Renoir™ II Architectural Wallbox Dimmers - Thin Heat Sink
CAUTION ON RETROFITS:
When retrofitting dimming ballasts into fixtures that originally had instant start ballasts, the sockets MUST
be replaced with rapid start sockets in order to allow proper dimmer operation and prevent damage to the
dimming ballast. Refer to the instructions provided with the ballast. Leviton sockets for T8 lamps which fit
many common applications can be purchased with Cat. No. #13661.
WALLPLATES ORDERING KEY
Each device is supplied with a white, single gang plate. For purchase of replacement plates or plates in an
alternate color, please consult the diagram below. For make-to-order plates, 4-6 week lead time is required.
*Ganged dimmers may require de-rating. Please reference www.leviton.com/renoirII or consult with Customer Service
for additional information
See Renoir II Wallplates data sheet for order configuration information
AWPO
FINS
F = All fins on
0 = (Fins to be
removed when
possible (allows
for narrowest
possible
installation)
WIDE
DIMMERS
W = 0-4
supported*
COLOR
E = Black
G = Gray
I = Ivory
T = Light Almond
W = White
NARROW
DIMMERS
N = 0-6
supported*
-
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 fax 800-832-9538 tech line (8:30AM-7:00PM ET Mon-Fri) 800-824-3005
Leviton Manufacturing Co., Inc. Energy Management, Controls and Automation
20497 SW Teton Avenue, Tualatin, OR 97062 tel 800-736-6682 fax 503-404-5594 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004
Visit our Website at: www.leviton.com/renoirii
©2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
