1000415208 Catalog
2016-10-27
: Pdf 1000415208-Catalog 1000415208-Catalog B6 unilog
Open the PDF directly: View PDF .
Page Count: 404
Download | |
Open PDF In Browser | View PDF |
Technical catalogue | June 2014 Distribution switchgear Index 1 Presentation of the range 2 Gemini switchboards 3 ArTu L modular structures 4 ArTu M monobloc structures 5 ArTu K modular structures 6 In-depth technical information 7 Overall dimensions 8 Index of codes ABB Tecnichnical catalogue | 1STC008001D0204 ABB SACE Division – Environmental and Ethics Quality certificated Among the companies in the Group, ABB SACE is up front in dedicating considerable resources to achieving sustainable development and environmental protection objectives. Confirmation of this is provided by all the company production sites having obtained ISO 9001 quality certification and ISO 14001 environmental management system certifications. Using analysis tools such as LCA (Life Cycle Analysis), ABB SACE’s design activities already include assessment and improvement of the environmental performances of its products over their whole life cycle during the initial stage, in order to guarantee optimisation of the technical and energy performances during service, to control and reduce environmental impact during the production stage and to define the end of life management scenarios. The Garbagnate Monastero site has also obtained the certification of integrated management system QAS (Quality, Environment and Safety management system.) All company sectors are, in fact, actively involved in implementing improvement policies for environmental management through rationalisation of consumption of raw materials and energy, prevention of pollution, respect of water and air, limitation of noise emission and reduction in waste from production processes, as well as carrying out periodic environmental audits at major suppliers ‘premises. Each of these objectives and activities is the result of farsightedness in adopting ecological policies and methods for reducing the environmental loads and, within the panorama of Italian companies, ABB SACE is a leader from this viewpoint, too, just as it is for the quality of its products. ABB: Energy Efficiency for a sustainable development. ABB takes care of its commitment in promoting environmental protection and development, providing sustainable products and solutions that contribute to improving energy efficiency and plant productivity, reducing at the same time CO2 emissions. Selection and design tools Technical softwares DOC 2 DOC 2 is a program for the design and calculation of single-line diagrams of low- and medium-voltage electrical systems, for selection of switching and protection devices and for testing and co-ordination of protection devices. Thanks to the design functions provided by the integrated CAD, the new switchboard configuration module makes it possible to develop ABB electrical switchboard projects and produce commercial technical quotations with CAT. CAT 7 CAT 7 is a tool allowing ABB SACE products to be easily chosen and fitted with accessories in order to rapidly and accurately prepare estimates and quotes. With CAT 7 choosing and adding accessories to ABB SACE products is now easier and faster than ever, thanks to the new product selection mask and accessory module. Curves Curves is the most direct software for verifying the characteristics of protection devices and system components intervention. Setting, verifying and documenting the calibration of release devices and co-ordinations is easier than ever before. OTC The OTC thermal calculation module makes it possible to verify the thermal performance of ABB switchboards and to size fans and air conditioning units to install on the panel. Front CAD FrontCAD is a CAD application for drawing the electric boards design and layouts. FrontCAD contains a big library of blocks, shapes of many ABB products, like enclosures and other electrical devices; those draws can be used to create the CAD layout of distribution and automation switchboards. FrontCAD is compatible with different type of CAD application. “DOC & CAT” is the technical software suite which helps to bring projects and quotes to fruition easily, quickly and completely. The entire software collection is available to download for free from the Online Business portal. ABB Software Desktop is a platform for installing and managing these Softwares. ABB Software Desktop automatically detects which programs are installed on the computer, allowing them to be updated. Gemini. Something completely different in switchboards. Gemini. Quality and safety. ABB’s Gemini is designed and built in compliance with reference Standards that define its constructional and functional characteristics. In particular, the IP66 degree certifies that Gemini is totally protected against the infiltration of solid bodies and is resistant to the penetration of jets of water similar to sea waves. Absolute protection is provided by double insulation even in the event of indirect contact. Gemini. Fit for all applications. Even in very difficult application circumstances, Gemini gives high-level performances, with resistance to fire and abnormal heat up to a temperature of 750 °C and a functioning temperature from -25 °C to 100 °C. There are as many configurations as there are ABB devices for low voltage automation and distribution: moulded-case circuit breakers, modular circuit breakers, monitoring, control and signaling devices, wiring ducts and electrical connection systems. All of these components give the “Gemini system” an enormous range of ad hoc solutions that are easy to assemble with the snap-on system. ArTu. Go ahead and select the switchgear you need. ArTu. A great offer, really high performances ABB proposes three series of switchgear with different characteristics thought up to make it possible to select the most suitable switchgear for the installation requirements. Different sizes for optimal use of the spaces available. Great savings in storage space is ensured by the rapid assembly kit containing so few pieces that skilled personnel is not required. IP degrees of protection for all types of application up IP65 - the only switchgear to reach such a high value. Extremely sturdy and flexible, it is made for plants up to 6300A. ArTu. Born certified. Fully checked and certified (IEC 60439-1 and IEC 61439-1 and 2 Standard) by an external independent organisation (Acae Lovag), the ArTu switchgear is a synonym of safety and quality. The certification is the fruit of severe tests carried out on the whole configuration, consisting of metalwork structures, circuit-breakers and busbar system. Certificato N°OHS-015 Certificato N°1612/98/S Certificato N° EMS-051 Certificato N°SGI004 ArTu. A long experience through many projects. The ArTu switchgear was born from an innovative project, created around the needs of all the professional figures involved in building and installing switchgear. This is constantly updated on the basis of the numerous projects which over these past years have had the ArTu series of switchgear as their leading player (Airports, underground railways, hospitals, industrial complexes, residential complexes, ports, tunnels, stretches of railways, theatres, etc.). ArTu L. Everything you need simply and conveniently ArTu L. Why complicate your life? Up to 800A you have a series of both wall-mounted and floor-mounted switchgear available, able to ensure a high standard of quality along with maximum simplicity of selection and assembly. Fitted with a structure, which is completely open at the sides, means you can carry out cabling very conveniently, with the switchgear placed horizontally on two trestles. And, if we are talking about cabling, there is nothing which simplifies and speeds it up better than the Unifix H or L wiring system, created by ABB for its modular and moulded-case circuit-breakers. The cable riser container is available in a width of 300mm to take different busbar systems, and, furthermore, with a convenient box placed above the switchgear, increases the space available for the incoming cables. ArTu M. Top level functionality and protection. ArTu M. Maximum protection up to 630A. The ArTu M series switchgear is ideal for terminal wall-mounted switchgear with modular circuit-breakers and floor-mounted secondary distribution switchgear with moulded-case circuit-breakers up to 630A. Many versions are available, for wall-mounted installation with depths of 150 and 200mm and for floor-mounted installation, with a depth of 250mm. The degree of protection is at top market levels, reaching up to IP65, thanks to an innovative design and advanced construction systems. The switchgear is available in 600mm useful width, with the possibility of installing 24 DIN modules in one row, and 800mm width choosing between installation of 24 DIN modules in one row plus the cable riser, or 36 DIN modules in one row. ArTu K. New horizons up to 6300A. ArTu. High performances? No problem The ArTu K series switchgear is ideal for primary distribution switchgear (Power Center type) with air and moulded-case circuit-breakers and any internal segregations up to Form 4, and for floor-mounted secondary distribution switchgear with moulded-case and modular circuit-breakers. The ArTu K series consists of modular switchgear for floor-mounted installation with depths of 150, 225, 300, 500, 700 and 900mm, with IP31, IP41 and IP65 degrees of protection - the highest value available on the market. Within the ArTu K series switchgear, like all the series in the range, it is possible to install ABB apparatus (System Pro M modular circuit-breakers, Tmax moulded-case circuit-breakers, T and XT series and Emax air circuit-breakers) with an excellent and certified level of integration. The switchgear is available in four functional widths (390, 600, 800mm and 1000mm) and in two functional heights (1800 and 2000mm), which allow installation of 9 and 10 modules 200mm in height respectively. 10 9 200 9 8 8 7 7 6 1800 200 6 5 5 4 4 3 3 2 2 1 1 2000 Presentation of the range Characteristics of Gemini switchboards 1/2 Characteristics of ArTu 1/4 Composition of the series 1/8 ABB Technical catalogue | 1STC008001D0204 1/1 1 Presentation of the range Characteristics of Gemini switchboards 1 Gemini is the result of design work conducted by ABB with the direct collaboration of switchboard manufacturers, installers and designers who considered versatility to be the discriminating element when purchasing a switchboard, equally as important as sturdiness and reliability. Gemini fulfils this requirement by providing a product that can be used for three different purposes: in addition to the basic configuration it also provides the components necessary for equipping it as an automation switchboard or as a distribution and mixed switchboard. In all applications, compatibility with ABB protection, control and monitoring products means that a real system of integrated and complementary functions can be configured. Typical examples of some Gemini applications can be seen in installations in industrial production departments and on board machines, in galvanization plants and varnishing cabins, in petrol stations and car-washing plants, boiler-rooms, car parks, shopping malls and in any other environments where distribution and automation demand specific safety requirements and service continuity. Gemini also has flexible measurements, with six different box sizes and internal space to accommodate from 24 to 216 DIN modules. To respect safety standards, all the switchboard’s components can be fixed to the base plate or to the box frame without having to use any tools; wiring is carried out from the front followed by snapping the base plate or the frame onto the box. The patented frame is fitted with the cable duct incorporated in the uprights. In its design, Gemini repeats the shapes and RAL 7035 grey color of the ArTu switchboards with which it can be configured as a main protection switchboard. 1/2 1STC008001D0204 | ABB Technical catalogue In the basic configuration, Gemini switchboards are composed of boxes in six different sizes ranging from 335x400x210 mm to 840x1005x360 mm (WxHxD, external measurements) and with opaque or transparent doors. In both versions, the doors are reversible and clip onto the hinges without the need to use tools; the fact that they open at an angle of more than 180° means that it is easy to work on the components installed inside the switchboard. The seal applied by extrusion along the sides of the doors guarantees IP66 degree of protection. Access to the inside of the switchboard is protected by a standard double bit lock that can be replaced by locks of another type available in the accessories. Boxes and doors can be requested either separately or as combined “box + door” codes, to make filling out the order form more flexible. Inside the packages, the door is always wrapped separately and inserted inside a pocket that protects it from accidental damage until wiring is completed and the switchboard is installed. Hole-cover plugs to guarantee IP protection and double insulation for wall mounting are also supplied with the pack together with the instruction sheet. Gemini is made in a thermoplastic material that has a very low halogen content and is 100% recyclable. The environmental compatibility of Gemini is an important objective right from the design phase where the Life Cycle Assessment (LCA) procedure, defined in 1990 during the Society of Environmental Toxicology and Chemistry Conference (Vermont, USA), is followed. Life Cycle Assessment is an objective method for analyzing the energy and environmental loads relating to a product, process or activity, carried out by identifying and quantifying energy, the materials used and emissions released into the environment. Divided into four phases, the assessment covers the entire life cycle of the product, process or activity, from the extraction and transformation of raw materials to manufacturing and distribution, and from usage to recycling and decommissioning. No tools are needed for installation. The doors hook onto the hinges with special hinge pins and are reversible. Fixing hooks and feet allow the frame to be snap-mounted inside the box. ABB Technical catalogue | 1STC008001D0204 1/3 1 Presentation of the range Characteristics of ArTu switchgears 1 The range of ABB SACE ArTu distribution switchgear provides a complete and integrated offer of monobloc metalwork structures and kit systems for main and sub low voltage distribution switchgear, which satisfy all plant requirements depending on the type of installation, degree of protection required, and electrical and mechanical characteristics. Starting from simple assembly kits, the ArTu switchgear allows numerous switchgear configurations: - for Power Center type main distribution, with a prevalence of air circuit-breaker and moulded-case circuit-breakers and any internal segregations up to Form 4; - for floor-mounted secondary distribution, equipped with moulded-case and modular circuit-breakers; - for wall-mounted end distribution, with just modular circuit-breakers. The user of ABB SACE circuit-breakers can therefore have a complete system of enclosures, in accordance with the reference standards, which guarantees absolute compatibility between the various elements (enclosures, circuit-breakers and distribution systems), together with maximum assembly and cabling facility. Special consideration has been given to cabling requirements, foreseeing dimensions of the structure, but also providing special seats for fixing the plastic cabling duct horizontally and vertically. The ArTu switchgear is noted for the following features: - integrated range of modular metalwork structures up to 6300 A with common accessories; - possibility of fulfilling all application requirements in terms of installation (wall-mounting, floor-standing, monobloc, corner versions and cabinet kits) and degree of protection (IP31, IP41, IP43, IP65); - maximum integration with modular apparatus and the moulded-case and air circuit-breakers, so that additional drilling or adaptations are not required; - minimum switchgear assembly times, thanks to the simplicity of the kits, standardisation of the small assembly items, self-supporting elements and the presence of clear reference points for assembly of the plates and panels; - segregations in kits up to Form 4; - use of the Unifix rapid cabling system. The range of ArTu enclosure structures allows construction of numerous switchgear configurations 1/4 1STC008001D0204 | ABB Technical catalogue The ArTu switchgear allows segregations up to Form 4 to be made The use and installation of the kits according to the instructions provided means that assembly and cabling times can be reduced to a minimum, for example thanks to the reference points for positioning the panels and plates, and that respect of the insulation distances and the rated characteristics of the circuit-breakers are guaranteed. The ArTu range includes three different series of switchgear, which are completed with the same accessories: ArTu L series This consists of a range of modular switchgear kits, with a capacity of 36 modules per row and IP31 degree of protection (without door) or IP43 (basic version with door). Installation can be either wall or floor-standing: - Wall-mounted ArTu L, with 600, 800, 1000, and 1200mm (useful) heights, 165mm depth, 600mm width. It allows installation of the modular System pro M apparatus, and moulded-case Tmax T1-T2-T3 circuit-breakers, XT1 and XT3 circuit breakers. - Floor-standing ArTu L, with 1400, 1600, 1800, 2000mm (useful) heights, 195 mm depth, 600mm width. It allows installation of the modular System pro M apparatus and moulded-case Tmax T1…T6 800A circuit-breakers (fixed version with front terminals); XT1... XT4 (fixed version with front terminals). ArTu M series This consists of a range of monobloc switchgear for wall-mounted installation (with depths of 115 and 165mm and with IP65 degree of protection) or floor-standing installation (with depth of 195 mm and IP31 or IP65 degree of protection), where it is possible to mount System Pro M modular apparatus and Tmax T1, T2 and T3, XT1 and XT3 moulded-case circuit-breakers on a DIN rail. In the wall-mounted versions (D =165 mm), the Tmax moulded-case circuit-breakers up to 250 A can be installed, whereas in the floormounted versions, the moulded case Tmax T series up to T6, XT series up to XT4 circuit-breakers can be installed. ArTu K series This consists of a range of modular switchgear kits for floor-standing installation with six different (useful) depths: 150, 225, 300, 500, 700 and 900 mm, and with IP31 degree of protection (without front door), IP41 (with front door and side ventilated panels) and up to IP65 (with front door and blind side panels). It is possible to install System Pro M modular apparatus, the ranges of T and XT series circuit-breakers in all their possible configurations, and Emax X1, E1, E2, E3, E4 and E6 air circuit-breakers. Use and installation of the kits, according to the instructions provided, allow assembly and cabling times to be reduced to a minimum ABB Technical catalogue | 1STC008001D0204 1/5 1 Presentation of the range Characteristics of ArTu switchgears 1 The ArTu switchgear has the following functional widths: - 390 mm, for installation of moulded-case circuit-breakers up to 1600 A (T7); - 600 mm, which is the basic dimension for installation of all the apparatus; - 800 mm, for making the lateral cable container inside the structure of floor-mounted switchgear or to use panels with 36 DIN modules in one row. - 1000mm, for installation of Emax E4, E6 air circuit-breakers. The panels for Tmax, and Emax circuit-breakers have 100 mm modularity. The useful inside height space varies from 600 mm (L wall-mounted series) to 2000 mm (L and M floor-standing series and K series), offering optimisation and automatically reducing the spaces taken up by the switchgear. With the shaped section busbar system, ArTu switchgear for low voltage power distribution further enhance perfect integration with the apparatus and, in full conformity with the IEC 60439 Standard, can be certified by carrying out only the individual tests. Using Artu enclosures and relative accessories together with modular apparatus and moulded-case and air circuit-breakers, it is therefore possible to build AS or ANS type switchgear without carrying out further type tests, simply respecting the selection criteria and the assembly instructions for the various components. The ArTu distribution system consists of: - shaped section copper busbars with capacity from 400 A to 3200A; - flat copper busbars up to 6300A; - busbar holders and relative crosspieces for short-circuit withstand up to 105kA; - flexible busbars for connection of the moulded-case circuit-breakers and screws and hammer for connection of the latter to the shaped section busbars. The panels for Tmax, and Emax circuit-breakers have 100mm modularity 1/6 1STC008001D0204 | ABB Technical catalogue A peculiarity of the shaped section busbar system is its extremely compact dimensions, 1 which allow it to be assembled directly inside the cable container, on the back or on the side of the structure, keeping front access. This is possible thanks to the scaled or linear type busbar holders, which also allow assembly in the L or M floor-mounted series of switchgear, with reduced dimensions. The ABB SACE busbar and accessories system prepared for installation in ArTu distribution switchgear undergoes the short-circuit withstand tests with a value of In up to 6300 A and Icw up to 105 kA (1s) according to the IEC 60439-1 Standard, in ABB laboratories recognised by ACAE/LOVAG. The Unifix rapid cabling system, which allows simple, rapid and safe cabling of all the ABB SACE apparatus, completes the switchgear. Unifix is available in two versions: the Unifix H series, suitable for structured cabling of moulded-case circuit-breakers up to 250A (T series up to T3 and XT series with XT1 and XT3) and modular System Pro-M circuit-breakers, and the Unifix L series, specifically for rapid cabling of modular System Pro-M circuit-breakers. A fundamental characteristic of these systems is the possibility of combining different types of circuits (single-phase/three-phase/ auxiliary) within a single module. Unifix also allows bench cabling to be carried out, and to then only install it in the switchgear at a later time, without any limitation of the types or combinations of apparatus which can be installed. This way cabling times are considerably reduced, making realisation of the power supply by means of cables superfluous, as the rigid coupled connectors - standardised for the different types of apparatus - do, in fact, see to this. The ABB SACE busbar system and accessories for installation in the distribution switchgear The Unifix rapid cabling system ABB Technical catalogue | 1STC008001D0204 1/7 Presentation of the range Composition of the series 1 Gemini Functional dimensions (mm) Front coverings System Pro M modular apparatus Tmax moulded-case circuit-breakers T1…T5 630A Height Width Depth counterdoor Functional frames IP40 glass door IP66 blind door IP66 Unifix L distribution system 300 250 180 450 375 230 600 375 230 600 500 230 750 500 330 900 750 300 ArTu L Wall structures Functional dimensions Floor structures Functional dimensions (mm) (mm) Height Width Depth Internal cable container Width Additional cable container Width Front covers 200mm 300mm IP31 IP43 Height Width Depth 600 600 165 800 600 165 1000 600 165 1200 600 165 Removable side panels Cable connection box 1400 600 195 1600 600 195 1800 600 195 2000 600 195 1400 800 195 1600 800 195 1800 800 195 2000 800 195 1/8 1STC008001D0204 | ABB Technical catalogue 1 Busbar distribution system Unifix distribution system Tmax moulded-case circuit-breakers L Series H Series System Pro M modular apparatus Vert. back Vert. cable container Horiz. box T1-T2-T3-T4-T5 ≤400A T6 ≤800A XT1-XT2-XT3-XT4 ≤250A ABB Technical catalogue | 1STC008001D0204 1/9 Presentation of the range Composition of the series 1 ArTu M Wall structures Functional dimensions (mm) Floor structures Functional dimensions (mm) Height Width Depth Internal cable container Width Additional cable container Width Front covers 300mm IP31 Side covers IP65 Height Width Depth 600 600 115 600 115 IP65 800 600 165 1000 600 165 1200 600 165 1400 600 195 600 195 800 195 600 195 1600 1800 800 195 600 195 800 195 2000 1/10 1STC008001D0204 | ABB Technical catalogue 1 Busbar distribution system Unifix distribution system Vert. cable container L Series System Pro M modular apparatus Tmax moulded-case circuit-breakers T1-T2 ≤160A H Series T3 ≤250A T4-T5-T6 ≤630A XT1-XT3 ≤250A XT2-XT4 ≤250A ABB Technical catalogue | 1STC008001D0204 1/11 Presentation of the range Composition of the series 1 ArTu K Functional dimensions (mm) Height Functional frames Internal cable container with reduced frames Width Depth reduced 600 150 open closed Addit. cable container for frames for frames Width 300mm open closed Front coverings Side coverings IP31/41 IP31/41 IP65 IP65 1600 1800 2000 800 150 390 225 390 300 390 500 390 700 390 900 600 150 600 225 600 300 600 500 600 700 600 900 800 150 800 225 800 300 800 500 800 700 800 900 1000 900 1/12 1STC008001D0204 | ABB Technical catalogue 1 Busbar distribution system Tmax moulded-case circuitbreakers Unifix distribution system Emax air circuit-breakers L Series H Series System Pro M modular apparatus Segregations Form 2/3/4 Vert. back Vert. side Horiz. T1…T6 T7/T8 XT1…XT4 250A X1 E1-E2E3 ≤3200A E4 4000A E6 6300A ABB Technical catalogue | 1STC008001D0204 1/13 Gemini switchboards General 2/2 Selection of the structure 2/4 Kit for installing apparatus 2/6 Distribution system 2/9 Ordering codes 2/11 Examples of configurations 2/23 ABB Technical catalogue | 1STC008001D0204 2/1 2 Gemini switchboards General ABB SACE’s Gemini range is revolutionizing the market of low voltage electric insulating switchboards. The reason for this is that it is the first switchboard made in thermoplastic material, to which the co-injection molding technique gives the same 2 mechanical characteristics as polyester. This means that it is extremely sturdy, with its rigid covering and expanded internal core. Moreover, it contains no fiberglass, a material that with time rises to the surface, jeopardizing the functioning and safety of switchboards made in polyester with which it is usually mixed. Gemini switchboards are made with coinjection, which ABB SACE is the first manufacturer in the electric field to use as a molding technique. This process obtains a “sandwich” of two materials with a compact external covering and an expanded core, guaranteeing the highest level of mechanical protection against impacts (IK10) without the need to add hardening substances. 2/2 1STC008001D0204 | ABB Technical catalogue Gemini switchboards have IP66 degree of protection (IP30 with the door open and with the appropriate components installed) and a very high resistance to chemical and atmospheric agents. This is the reason why Gemini guarantees excellent performances even in particularly severe operating conditions. In distribution and mixed applications, the Gemini switchboard is designed to be fitted with System pro M modular devices and Tmax moulded-case circuit breakers. The frame is the load-bearing element of the configuration: DIN rails, partial modular plates and the special Tmax mounting and cabling kits are snapped onto the uprights. All the components can be adjusted up to six levels of depth with 12.5 mm pitch and arranged in height with a standard installation pitch of 150, 225 and 300 mm and 75 mm distance between the rows. Blank or drilled front panels are applied to protect the equipment and these can be hinged onto both sides; the cables are housed inside the vertical wiring duct integrated in the uprights according to an exclusive ABB patent. Wiring is carried out by pulling out the frame and working from the front; the ergonomic grip and the standard feet and snap-on hooks supplied make it easy to insert it inside the switchboard after the job is finished. To finish the job, the inner door can be mounted (reversible and in insulating material), guaranteeing IP30 degree of protection when the switchboard door is open. No tools are needed unless the inner door is equipped with buttons, warning lights, etc. The frame can be extracted to make wiring operations easier at the workbench. The special structure of the inner perimeter of the box ensures further protection against the penetration of water. The box is supplied with a spirit level. Technical characteristics Compliance with Standards CEI EN 50298, CEI 23-48, CEI 23-49, IEC 60670, CEI EN 60439-1 CEI EN 62208 - IEC 61439-1-2 Rated service voltage Ue 1000 V a.c. - 1500 V c.c. Operating temperature °C -5 °C ÷ +40 Resistance to abnormal heat and fire up to 750 °C Degree of resistance to impacts IK10 (IEC 62262) Degree of protection (CEI EN 60529) IP 30 open door IP 66 closed door Recyclable 100% ABB Technical catalogue | 1STC008001D0204 2/3 2 Gemini switchboards Selection of the structure Rapid selection table mod. 12/18 24/36 (L) (P) L P 2 150 150 (H) H External dimensions Functional dimensions Complete switchboards Size N° of vertical mod. H=150mm N° of installable DIN modules (H) mm (W) mm (D) mm H mm W mm D mm Transparent Opaque Box Transparent Opaque Uprights 1 2 24 (12x2) 400 335 210 300 250 180 1SL0211A00 1SL0201A00 1SL0221A00 1SL0241A00 1SL0231A00 1SL0283A00 2 3 54 (18x3) 550 460 260 450 375 230 1SL0212A00 1SL0202A00 1SL0222A00 1SL0242A00 1SL0232A00 1SL0284A00 3 4 72 (18x4) 700 460 260 600 375 230 1SL0213A00 1SL0203A00 1SL0223A00 1SL0243A00 1SL0233A00 1SL0285A00 4 4 96 (24x4) 700 580 260 600 500 230 1SL0214A00 1SL0204A00 1SL0224A00 1SL0244A00 1SL0234A00 1SL0285A00 5 5 120 (24x5) 855 585 360 750 500 330 1SL0215A00 1SL0205A00 1SL0225A00 1SL0245A00 1SL0235A00 1SL0286A00 6 6 216 (36x6) 1005 840 360 900 750 330 1SL0216A00 1SL0206A00 1SL0226A00 1SL0246A00 1SL0236A00 1SL0287A00 Door Sizes available Available in 6 different sizes with transparent or opaque door, the Gemini switchboards are suitable for installation in any application context. 330 330 24 375 230 18 250 180 d. 18 450 300 12 m od 24 mo 600 900 mo d. mo d. 750 600 mo d. . Size 1 Size 2 > Selection by components page 2/11 Size 3 > In-depth technical information page 6/1 2/4 1STC008001D0204 | ABB Technical catalogue mo d. 500 375 230 500 36 230 900 Size 4 > Overall dimensions page 7/1 Size 5 Size 6 2 DIN rail kit DIN rail+drilled panel Kit for Tmax plate+drilled panel Kit for Tmax XT series plate+drilled panel Blank panel 1 mod. H=150mm 1+1/2 mod. H=225mm 1 mod. H=150mm 2 mod. H=300mm 1 mod. H=150mm 2 mod. H=300mm 1/2 mod. H=75mm 1 mod. H=150mm 2 mod. H=300mm 1 mod. H=150mm 2 mod. H=300mm DIN rail 1SL0307A00 - - - - - 1SL0318A00 1SL0324A00 1SL0330A00 1SL0296A00 - 1SL0290A00 1SL0308A00 1SL0313A00 1SL0336A00 1SL0370A00 1SL0373A00 1SL0376A00 1SL0319A00 1SL0325A00 1SL0331A00 1SL0297A00 1SL0302A00 1SL0291A00 1SL0308A00 1SL0313A00 1SL0336A00 1SL0370A00 1SL0373A00 1SL0376A00 1SL0319A00 1SL0325A00 1SL0331A00 1SL0297A00 1SL0302A00 1SL0291A00 1SL0309A00 1SL0314A00 1SL0337A00 1SL0371A00 1SL0374A00 1SL0377A00 1SL0320A00 1SL0326A00 1SL0332A00 1SL0298A00 1SL0303A00 1SL0292A00 1SL0309A00 1SL0314A00 1SL0337A00 1SL0371A00 1SL0374A00 1SL0377A00 1SL0320A00 1SL0326A00 1SL0332A00 1SL0298A00 1SL0303A00 1SL0292A00 1SL0310A00 1SL0315A00 1SL0338A00 1SL0372A00 1SL0375A00 1SL0378A00 1SL0321A00 1SL0327A00 1SL0333A00 1SL0299A00 1SL0304A00 1SL0293A00 > Selection by components page 2/11 > In-depth technical information page 6/1 Modular plate > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 2/5 Gemini switchboards Selection of the structure Suggestion for installation of Tmax moulded-case circuit breakers 2 The table indicates the type of installation required for the different versions of Tmax moulded-case circuit breakers in Gemini switchboards. Before carrying out wiring operations check compliance with Standards on the basis of the technical characteristics of the switchboard and circuit breaker (CEI 23-51 or CEI EN 60439-1). T1 Size 1 2 T2 T3 3p 4p 3p D 4p D 3p 4p 3p D 4p D 3p 4p 3p D 4p D 3p D O1 T D K1 K2 3 XT1 4p O1 O2 T D K1 T D K1 XT4 3p D 4p D 3p 4p 3p D 4p D 3p 4p 3p D 4p D 3p 4p 3p D 4p D O1 O2 T D K1 O2 XT3 4p O1 XT2 3p D 4p D 3p K2 6 3p D 4p D 3p K2 5 T5 4p K2 4 T4 Installation O1 O2 T D K1 K2 O1 O2 T Caption - D, installation on DIN rail - K1, installation with Tmax kit H = 150 (holes made) - K2, installation with Tmax kit H = 300 (holes made) - O1, installation on modular plate (1 module, H = 150 mm) - O2, installation on modular plate (2 modules, H = 300 mm) - T, installation on total base plate > Selection by components page 2/11 > In-depth technical information page 6/1 2/6 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Horizontal installation 2 Kit for Tmax with pre-drilled holes Size/Codes Fixed circuit-breaker with front terminals N° poles Dimensions H (mm) 2/3 4/5 6 Tmax T1 03/4 150 1SL0336A00 1SL0337A00 1SL0338A00 Tmax T2 03/4 150 1SL0336A00 1SL0337A00 1SL0338A00 Tmax T2+diff.le 3 300 1SL0370A00 1SL0371A00 1SL0372A00 Tmax T3 03/4 300 1SL0370A00 1SL0371A00 1SL0372A00 N° poles Dimensions H (mm) 1 2/3 4/5 6 150 1SL0308A00 1SL0309A00 1SL0310A00 225 1SL0313A00 1SL0314A00 1SL0315A00 225 1SL0313A00 1SL0314A00 1SL0315A00 Vertical installation Installation on DIN rail Fixed circuit-breaker with front terminals Size/Codes System Pro M compact modular apparatus Tmax T1-T2-T3 > Selection by components page 2/11 3/4 > In-depth technical information page 6/1 1SL0307A00 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 2/7 Gemini switchboards Kit for installing apparatus Wiring ducts 12 2 6 8 4 Wiring ducts Fix-O-rapid Base (mm) H (mm) Slot 8-12 mm Slot 4-6 mm Rapid snap-on bases for DIN rail Rapid snap-on bases for plate 15 17 05 019 05 119 - - 30 05 033 05 133 40 05 043 05 143 60 05 063 05 163 05 250 05 270 80 05 083 05 183 100 05 094 05 194 30 05 035 05 135 40 05 045 05 145 60 05 065 05 165 05 252 05 272 80 05 085 05 185 100 05 095 05 195 30 05 037 05 137 40 05 047 05 147 60 05 067 05 167 05 254 05 274 80 05 087 05 187 100 05 096 05 196 40 05 049 05 149 60 05 069 05 169 80 05 089 05 189 05 256 05 276 100 05 097 05 197 05 258 05 278 05 260 05 280 05 262 05 282 25 40 60 80 100 120 150 40 05 051 05 151 60 05 071 05 171 80 05 091 05 191 100 05 098 05 198 40 05 053 05 153 80 05 093 05 193 100 05 099 05 199 > Selection by components page 2/11 > In-depth technical information page 6/1 2/8 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Distribution systems Modular dividers Single-pole Three-poles 2 AD1076 AD1080(1) AD1007 D1081(2) AD1030 AD1031 AD1075 AD1006 In (A) 125 125 175 175 250 400 125 175 Icw (kA) 4.4 4.2 11 1.1 21 21 4.4 11 Version poles 1 1 1 1 1 1 3 3 DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate min. 10 6 16 10 35 95 10 16 max 35 35 70 70 120 185 35 70 4 4 6 10 6 5 5 6 6 2 2 Code Installation Power supply Ø cable (mm2) 2 N°outgoing feeder Ø cable (mm ) 1,5÷10 2,5÷16 10 2,5÷25 Dimensions HxWxD (mm) N° DIN modules 71x45x42,5 74x27x47 71x45x42,5 92x35x49 95.5x45x49 95.5x45x49 71.5x80x42,5 71.5x80x42,5 2,5 1,5 2,5 2 3 3 4.5 4.5 Rated service voltage Ue (V) 1000 Vca 1500 Vcc 1000 Vca 1500 Vcc 1000 Vca 1500 Vcc 1000 Vca 1500 Vcc 1000 Vca 1500 Vcc 1000 Vca 1500 Vcc 1000 Vca 1500 Vcc 1000 Vca 1500 Vcc Degree of protection IP 20 20 20 20 20 20 20 20 Three-poles Code AD1004 AD1028 AD1029 AD1027 In (A) 125 125 125 160 Icw (kA) 10 4.2 4.2 6.2 Ipk (kA) 24 25 25 20 Version poli 4.2 4 4 4 DIN35/plate DIN35/plate DIN35/plate DIN35 min. 6 6 6 10 max 35 25 with cable terminal 25 with cable terminal 50 7 9 Installation 2 Power supply Ø cable (mm ) N°outgoing feeder Ø cable (mm2) 1/6 5/phase 1.5/6 4/neutral 1.5/10 2/phase 6/neutral 1.5/16 2 2.5/16 Dimensions HxWxD (mm) N° DIN modules 8 6/25 2 2 3 74.5x98x45 93x89x48 96x126x48 90x160.5x50 5,5 5 7 9 Rated service voltage Ue (V) 1000 Vca 1500 Vcc 440 440 440 Degree of protection IP 20 20 20 20 (1) possibility of putting in parallel with AD1083 connections. (2) possibility of putting in parallel with comb type connections (not supplied). > Selection by components page 2/11 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 2/9 Gemini switchboards Distribution systems Unifix L 2 Technical characteristics Unifix L Rated service voltage (Ue) 400V AC Rated insulation voltage (Ui) 500V AC Rated impulse withstand voltage (Uimp) 6kV Rated frequency 50/60Hz Rated current (In) central power supply 100A lateral power supply 80A Rated short-time withstand current (Icw) Maximum peak current (Ipk) Maximum installable circuit-breaker size 100A Conditioned short-circuit Tmax T1 current (Icc) Tmax T2 N, S Connections (L1-L2-L3-N) for System Pro M modular apparatus. Tmax T3 With circuit-breaker S200 6kA-400V S200M 10kA-400V S200P 25kA-400V Degree of protection IP20 Characteristics of the insulating material Self-extinguishing thermoplastic V1 (UL94) Characteristics of the conductor material Electrolytic copper Width (N° modules/mm) 12/400 18/500 Power supply of the busbar with 100A feeder module without cable. Terminal capacity 35mm2. 24/600 36/800 Circuit-breaker series Unifix L SN201 DS201 ED3272 L1/N 40A T T ED3280 L2/N 40A N N ED3298 L3/N 40A S200 F200 ED3033 L1 100A ED3041 L2 100A Direct power supply of the busbars by means of feeder module. ED3058 L3 100A ED3066 N 100A F660-F670-S280 (80-100A) E200 - RS370 ED3132 Power supply L1/L2/L3/N - 350mm ED0026 Power supply L1/L2/L3/N - 1500mm ED0025 Power supply L1/L2/L3/N - 2500mm MDRC - Various apparatus ED3108 Power supply 2 cables L1/N 16A ED3116 Power supply 3 cables L1/L2/L3 16A ED3124 Power supply 4 cables L1/L2/L3/N 16A ED3355 APower supply 2 cables L1/N 40A ED3363 Power supply 3 cables L1/L2/L3 40A ED3371 Power supply 42 cables L1/L2/L3/N 71A Power supply by means of modules and cables in parallel. For the DDA locks, order the false module ED2845 codes separately according to the size of the residual current lock > Selection by components page 2/11 > In-depth technical information page 6/1 2/10 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Gemini switchboards Ordering codes Structures Boxes and doors - Available in 6 sizes Single order code combined with box and transparent and opaque door Pack with door dismounted and wrapped separately Door designed so that it can be hooked onto hinges at both vertical sides and mounted without the use of tools To be mounted to the wall using internal holes or fixing brackets supplied as accessories Door opening at an angle of more than 180° RAL 7035 grey color Doors supplied with 2 standard double bit locks (3 for sizes 5 and 6) that can be replaced with locks for ciphered key or with square/triangular impression (the standard triplex key is suitable for use with three types of impressions). Structure with transparent door Size N° vertical mod. H=150mm Useful dimensions WxHxD (mm) Code Package/ No. of pieces 1 2 250x300x180 1SL0211A00 1/1 2 3 375x450x230 1SL0212A00 1/1 3 4 375x600x230 1SL0213A00 1/1 4 4 500x600x230 1SL0214A00 1/1 5 5 500x750x330 1SL0215A00 1/1 6 6 750x900x330 1SL0216A00 1/1 Structure with blind door Size N° vertical mod. H=150mm Useful dimensions WxHxD (mm) Code Package/ No. of pieces 1 2 250x300x180 1SL0201A00 1/1 2 3 375x450x230 1SL0202A00 1/1 3 4 375x600x230 1SL0203A00 1/1 4 4 500x600x230 1SL0204A00 1/1 5 5 500x750x330 1SL0205A00 1/1 6 6 750x900x330 1SL0206A00 1/1 Size N° vertical mod. H=150mm Useful dimensions WxHxD (mm) Code Package/ No. of pieces 1 2 250x300x180 1SL0221A00 1/1 2 3 375x450x230 1SL0222A00 1/1 3 4 375x600x230 1SL0223A00 1/1 4 4 500x600x230 1SL0224A00 1/1 5 5 500x750x330 1SL0225A00 1/1 6 6 750x900x330 1SL0226A00 1/1 Single box > Rapid selection table page 2/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 2/11 2 Gemini switchboards Ordering codes Structures Frontal door Transparent door 2 Size N° vertical mod. H=150mm Useful dimensions WxHxD (mm) Code Package/ No. of pieces 1 2 250x300x180 1SL0241A00 1/1 2 3 375x450x230 1SL0242A00 1/1 3 4 375x600x230 1SL0243A00 1/1 4 4 500x600x230 1SL0244A00 1/1 5 5 500x750x330 1SL0245A00 1/1 6 6 750x900x330 1SL0246A00 1/1 Size N° vertical mod. H=150mm Useful dimensions WxHxD (mm) Code Package/ No. of pieces 1 2 250x300x180 1SL0231A00 1/1 2 3 375x450x230 1SL0232A00 1/1 3 4 375x600x230 1SL0233A00 1/1 4 4 500x600x230 1SL0234A00 1/1 5 5 500x750x330 1SL0235A00 1/1 6 6 750x900x330 1SL0236A00 1/1 Opaque door Inner doors - Made in insulating material IP30 degree of protection with door open Designed so that door can be hinged onto both vertical sides Snap-on mounting and fixing Inner doors > Rapid selection table page 2/4 Size N° vertical mod. H=150mm Useful dimensions WxHxD (mm) 1 2 250x300x180 1SL0251A00 1/1 2 3 375x450x230 1SL0252A00 1/1 3 4 375x600x230 1SL0253A00 1/1 4 4 500x600x230 1SL0254A00 1/1 5 5 500x750x330 1SL0255A00 1/1 6 6 750x900x330 1SL0256A00 1/1 > In-depth technical information page 6/1 2/12 1STC008001D0204 | ABB Technical catalogue Code > Overall dimensions page 7/1 Package/ No. of pieces Completion of structure Uprights - Incorporated vertical wiring duct (ABB patent) Snap-on mounting of all components (installation pitch of 75 mm) Snap-on insertion into box Depth of installed components adjusted at a pitch of 12.5 mm (4 positions for uprights of size 1 and 6 positions for the remaining ones) - Ergonomic grip to make it easy to insert and extract Upright with integrated wiring duct 1SL0313A00 1SL0314A00 1SL0315A00 Size Useful dimensions H (mm) Code Package/ No. of pieces 1 300 1SL0283A00 1/4 2 450 1SL0284A00 1/4 3 600 1SL0285A00 1/4 4/5 750 1SL0286A00 1/4 6 900 1SL0287A00 1/4 DIN rail kit - Supplied with DIN rail complete with supports to snap onto uprights and adjustable in depth Available in 1 module (H 150 mm) and 1+1/2 module (H 225 mm, sizes 2-6) dimensions Designed to be hinged onto both vertical sides Snap-on mounting onto uprights (in compliance with reference Standards a tool must be used for removing the panel) - Document pocket for storing descriptions of installed devices Panel + DIN rail 225 Dimensions W (mm) Code Package/ No. of pieces 1 300 1SL0307A00 1/8 2/3 450 1SL0308A00 1/8 4/5 750 1SL0309A00 1/8 6 900 1SL0310A00 1/8 Size 1 module 150 1SL0307A00 1SL0308A00 1SL0309A00 1SL0310A00 1+1/2 modules 2/3 450 1SL0313A00 1/8 4/5 750 1SL0314A00 1/8 6 900 1SL0315A00 1/8 DIN rail - Two-sided version - Supplied with mounting supports that snap onto uprights - Depth adjustment on uprights - Designed so that rapid Unifix L mounting bars can be snapped on DIN rail Size N° horiz. mod. Dimensions W (mm) Code Package/ No. of pieces 1 12 210 1SL0290A00 1/10 2/3 18 318 1SL0291A00 1/10 4/5 24 443 1SL0292A00 1/10 6 36 663 1SL0293A00 1/10 > Rapid selection table page 2/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 2/13 2 Gemini switchboards Ordering codes Completion of structure 1SL0336A00 1SL0337A00 1SL0338A00 2 150 300 1SL0370A00 1SL0371A00 1SL0372A00 Kit for installing Tmax moulded-case circuit breakers - For installing Tmax moulded-case circuit breakers in fixed version with front terminals - Composed of a plate with special drilled holes and a protection panel with vertical slots that can be hinged on both sides and snap-on mounted (in compliance with reference Standards a tool must be used for removing the panel) - Available for sizes 2-6 - Version H 150 with drillings for Tmax T1 3 poles (with and without residual current releaser), Tmax T1 4 poles (with and without residual current releaser), Tmax T2 3 poles (with and without residual current releaser), Tmax T2 4 poles (without residual current releaser) - Version H 300 with drillings for Tmax T2 4 poles (with residual current releaser), Tmax T3 3 poles (with and without residual current releaser), Tmax T3 4 poles (with and without residual current releaser) - Snap-on mounting onto uprights with the possibility of adjusting the plate depth Panel + plate Size Dimensions W (mm) Code Package/ No. of pieces 1 module H=150mm 2/3 375 1SL0336A00 1/4 4/5 500 1SL0337A00 1/4 6 700 1SL0338A00 1/2 2 modules H=300mm 2/3 375 1SL0370A00 1/4 4/5 500 1SL0371A00 1/4 6 700 1SL0372A00 1/2 When choosing the correct kit, see table on page 2/8. Kit for installing Tmax XT moulded-case circuit breakers - For installing Tmax moulded-case circuit breakers in fixed version with front terminals - Composed of a plate with special drilled holes and a protection panel with vertical slots that can be hinged on both sides and snap-on mounted (in compliance with reference Standards a tool must be used for removing the panel) - Available for sizes 2-6 - Snap-on mounting onto uprights with the possibility of adjusting the plate depth Panel + plate Size Dimensions W (mm) Code Package/ No. of pieces 1 module H=150mm 2/3 375 1SL0373A00 1/4 4/5 500 1SL0374A00 1/4 6 700 1SL0375A00 1/2 2 modules H=300mm > Rapid selection table page 2/4 2/3 375 1SL0376A00 1/4 4/5 500 1SL0377A00 1/4 6 700 1SL0378A00 1/2 > In-depth technical information page 6/1 2/14 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Completion of structure 1SL0296A00 1SL0297A00 1SL0298A00 1SL0299A00 Partial modular plates - Available in 1 module (H 150 mm) and 2 module (H 300 mm, sizes 2-6) dimensions - Snap-on mounting onto uprights with depth adjustment 2 Partial modular plates Size Dimensions W (mm) Code Package/ No. of pieces 1 module H=150mm 150 300 1SL0302A00 1SL0303A00 1SL0304A00 1SL0318A00 1SL0319A00 1SL0320A00 1SL0321A00 1SL0324A00 1SL0325A00 1SL0326A00 1SL0327A00 1 210 1SL0296A00 1/6 2/3 318 1SL0297A00 1/4 4/5 443 1SL0298A00 1/4 6 663 1SL0299A00 1/2 2 modules H=300mm 2/3 318 1SL0302A00 1/4 4/5 443 1SL0303A00 1/4 6 663 1SL0304A00 1/2 Blank panels - Available in 1/2 module (H 75 mm), 1 module (H 150 mm) and 2 modules (H 300 mm) dimensions - H 150 mm and H 300 panels designed to be hinged onto both vertical sides - Snap-on mounting onto uprights (in compliance with reference Standards a tool must be used for removing the panel) Blind front panels Size 75 Dimensions W (mm) Code Package/ No. of pieces 1/2 module H=75mm 150 300 1SL0330A00 1SL0331A00 1SL0332A00 1SL0333A00 1 250 1SL0318A00 1/10 2/3 375 1SL0319A00 1/10 4/5 500 1SL0320A00 1/6 6 700 1SL0321A00 1/4 1 module H=150mm 1 250 1SL0324A00 1/8 2/3 375 1SL0325A00 1/8 4/5 500 1SL0326A00 1/4 6 700 1SL0327A00 1/4 2 modules H=200mm 1 250 1SL0330A00 1/6 2/3 375 1SL0331A00 1/6 4/5 500 1SL0332A00 1/4 6 700 1SL0333A00 1/4 > Rapid selection table page 2/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 2/15 Gemini switchboards Ordering codes Completion of structure 2 1SL0353A00 1SL0354A00 1SL0355A00 1SL0356A00 Wiring kit - Composed of wiring duct in versions 25x60 mm and 40x60 mm (WxH, 8-12 mm slots) and Fix-O-Rapid device for the rapid snap-on hooking of the ducts on the DIN rail - Snap-on mounting on uprights with depth adjustment Wiring duct + Fix-O-Rapid Size Dimensions W (mm) Code Package/ No. of pieces Wiring 25x60mm 1SL0353A00 1SL0354A00 1SL0355A00 1SL0356A00 1 250 1SL0353A00 1/4 2/3 375 1SL0354A00 1/4 4/5 500 1SL0355A00 1/4 6 700 1SL0356A00 1/4 Wiring 40x60mm 1 250 1SL0360A00 1/4 2/3 375 1SL0361A00 1/4 4/5 500 1SL0362A00 1/4 6 700 1SL0363A00 1/4 Fix-O-Rapid Rapid mounting device for attaching wiring ducts to the base plate: it snaps onto the plate after drilling a ø 7 mm hole. Two Fix-O-Rapid devices are enough for each wiring duct section. Fix-O-Rapid guarantees maximum insulation since it does not involve the use of any metal component inside the wiring duct. If the wrong wiring duct is selected, it can be dismounted and a version with the same base and a different height can be attached to the Fix-O-Rapid. > Rapid selection table page 2/4 Description Code Package/ No. of pieces Rapid mounting device for wiring duct, W 25mm 05 270 20/600 Rapid mounting device for wiring duct, W 40mm 05 272 20/600 Rapid mounting device for wiring duct, W 60mm 05 274 20/600 Rapid mounting device for wiring duct, W 80mm 05 276 20/240 Rapid mounting device for wiring duct, W 100mm 05 278 20/240 Rapid mounting device for wiring duct, W 125mm 05 280 20/240 Rapid mounting device for wiring duct, W 150mm 05 282 20/240 > In-depth technical information page 6/1 2/16 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Completion of structure 1SL0259A00 1SL0260A00 1SL0261A00 1SL0262A00 1SL0263A00 1SL0264A00 2 Base plates - Available in three versions in blank or drilled metal and insulating material - Positioning at 3 different depths for size 1, 4 different depths for sizes 2-3-4 and 7 different depths for sizes 5-6 (adjustments with 30 mm pitch) - Supplied with feet and hooks adjustable at three further positions (with 7.5 mm pitch) - Snap-on mounting - Plates can also be mounted directly on the base with the special kit Base plate 1SL0275A00 1SL0276A00 1SL0277A00 1SL0278A00 1SL0279A00 1SL0280A00 2 1SL0267A00 1SL0268A00 1SL0269A00 1SL0270A00 1SL0271A00 1SL0272A00 5 Size Panel Dimensions WxHxD (mm) Code Package/ No. of pieces In blank metal 1 250x300x180 1SL0259A00 1/6 2 375x450x230 1SL0260A00 1/6 3 375x600x230 1SL0261A00 1/4 4 500x600x230 1SL0262A00 1/4 5 500x750x330 1SL0263A00 1/4 6 750x900x330 1SL0264A00 1/2 In drilled metal 1 250x300x180 1SL0275A00 1/6 2 375x450x230 1SL0276A00 1/6 3 375x600x230 1SL0277A00 1/4 4 500x600x230 1SL0278A00 1/4 5 500x750x330 1SL0279A00 1/4 6 750x900x330 1SL0280A00 1/2 Insulating material 1 250x300x180 1SL0267A00 1/6 2 375x450x230 1SL0268A00 1/6 3 375x600x230 1SL0269A00 1/4 4 500x600x230 1SL0270A00 1/4 5 500x750x330 1SL0271A00 1/4 6 750x900x330 1SL0272A00 1/2 Description Code Package/ No. of pieces Base mounting kit for metal plate 1SL0383A00 > Rapid selection table page 2/4 > In-depth technical information page 6/1 Base mounting kit for metal plate 1/10 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 2/17 2 Gemini switchboards Ordering codes Distribution system Unifix L ED…. Dimensions W (mm) Code Package/ No. of pieces 100A 2P 8 module busbar 400 ED2993 1/6 100A 2P 12 module busbar 450 ED3009 1/6 100A 2P 18 module busbar 600 ED3017 1/6 100A 2P 24 module busbar 800 ED3025 1/6 100A 4P 12 module busbar 400 ED2944 1/6 100A 4P 18 module busbar 450 ED2951 1/6 100A 4P 24 module busbar 600 ED2969 1/6 100A 4P 36 module busbar 800 ED2977 1/6 Connection with 2 conductors L/N 16A ED3108 1/6 Connection with 3 conductors L1/L2/L3 16A ED3116 1/6 Connection with 4 conductors L1/L2/L3/N 16A single phase ED3124 1/6 Connection with 2 conductors L1/N 40A ED3355 1/6 Connection with 3 conductors L1/L2/L3 40A ED3363 1/6 Connection with 4 conductors L1/L2/L3/N 40A ED3371 1/6 Description 2 2-poles busbars 2 poles 4 poles 100A 2P 36 module busbar N L1 L2 L3 N L1 Connections for various apparatus ED3066 ED3033 ED3041 ED3058 Connections for apparatus N°10 connections L1-N 40 A ED3272 1/10 ED3104 ED3101 ED3102 N°10 connections L2-N 40 A ED3280 1/10 N°10 connections L3-N 40 A ED3298 1/10 ED3103 N°10 connections L 1 100A ED3033 1/10 N°10 connections L 2 100A ED3041 1/10 N°10 connections L 3 100A ED3058 1/10 N°10 connections N 100A ED3066 1/10 Feeder with 4P 100A cable (W=350mm) ED3132 1/1 Feeder with 4P 100A cable (W=1500mm) ED0026 1/1 Feeder with 4P 100A cable (W=1500mm) ED0025 1/1 Parallel module 2P 100A with cable (W=600mm) ED3082 1/1 Parallel module 4P 100A with cable (W=400mm) ED3405 1/1 Parallel module 4P 100A with cable (W=600mm) ED3090 1/1 Parallel module 4P 100A with cable (W=800mm) ED3413 1/1 Parallel module 4P 100A with cable (W=1500mm) ED3439 1/1 N°10 single-pole power supply terminals L1 ED3101 1/10 N°10 single-pole power supply terminals L2 ED3102 1/10 N°10 single-pole power supply terminals L3 ED3103 1/10 N°10 single-pole power supply terminals N ED3104 1/10 N°10 busbar covers W=600mm ED2961 1/10 N°2 busbar covers W=800mm ED2962 1/2 Power supply modules with cable 400 350 600 1500 800 2500 1500 Power supply modules without cable In 100A ED3090 ED3405 ED3413 ED3439 ED3132 ED0026 ED0025 > Rapid selection table page 2/4 ED3124 Accessories > In-depth technical information page 6/1 2/18 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Accessories Locks Available in three versions with ciphered key and handle, with triangular and square impressions 1SL0340A00 1SL0341A00 1SL0339A00 1SL0342A00 1SL0458A00 Description Code Package/ No. of pieces Gemini standard lock 1SL0459A00 1/10 Lock with Yale type coded key and handle 1SL0340A00 1/10 Lock with triangular impression 1SL0341A00 1/10 Lock with square impression 1SL0339A00 1/10 Kit for vandalproof closure 1SL0458A00 1/10 Mounting elements Guarantee optimum wall, pole and floor mounting conditions 1SL0343A00 1SL0344A00 1SL0345A00 1SL0346A00 1SL0352A00 Description Code Plastic brackets (4 pieces) for horizontal and vertical wall mounting (*) 1SL0342A00 Metal brackets (4 pieces) for horizontal and vertical wall mounting 1SL0401A00 Pole mounting kit for sizes 1 switchboards 1SL0343A00 Pole mounting kit for sizes 2-3 switchboards 1SL0344A00 Pole mounting kit for sizes 4-5 switchboards 1SL0345A00 Pole mounting kit for size 6 switchboards 1SL0346A00 Floor mounting pedestal for sizes 1-4 1SL0352A00 Package/ No. of pieces 1/10 1/10 1/4 1/4 1/2 1/2 1/1 (*) Types of inserts are provided to adapt the ø 6 and 8 mm fixing brackets (*) The kit consists of 2 elements for mounting in the upper and lower parts of the switchboard. 1SL0385A00 1SL0386A00 1SL0387A00 1SL0388A00 1SL0390A00 Base cover For aesthetic as well as functional purposes, in particular for pedestal installations Size Description Code Package/ No. of pieces 1 Back plugging plate 1SL0385A00 1/4 2 Back plugging plate 1SL0386A00 1/4 3 Back plugging plate 1SL0387A00 1/2 4 Back plugging plate 1SL0388A00 1/2 5 Back plugging plate 1SL0389A00 1/2 6 Back plugging plate 1SL0390A00 1/2 > Rapid selection table page 2/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 2/19 2 Gemini switchboards Ordering codes Accessories Pedestal This enables the Gemini switchboard to be secured to the ground without the need to build plinths or foundations in cement since it is the pedestal that is buried. 2 Size Description Code Package/ No. of pieces 4 Gemini Pedestal size 4 1SL0464A00 1/1 5 Gemini Pedestal size 5 1SL0465A00 1/1 6 Gemini Pedestal size 6 1SL0466A00 1/1 Coupling kit Follows the aesthetic outline of the boxes. On request, contact ABB for minimum order quantities. Size Description Code Package/ No. of pieces 2/3 Vertical coupling kit for sizes 1SL0413A00 1/2 4 Vertical coupling kit for sizes 1SL0414A00 1/2 5 Vertical coupling kit for sizes 1SL0415A00 1/2 6 Vertical coupling kit for sizes 1SL0416A00 1/2 1SL0413A00 1SL0414A00 1SL0415A00 1SL0416A00 Bottom base H 30 For fixing the Gemini switchboard directly to the floor 1SL0423A00 1SL0424A00 1SL0425A00 1SL0426A00 > Rapid selection table page 2/4 Size Description Code Package/ No. of pieces 2/3 Bottom base 1SL0423A00 1/2 4 Bottom base 1SL0424A00 1/2 5 Bottom base 1SL0425A00 1/2 6 Bottom base 1SL0426A00 1/2 > In-depth technical information page 6/1 2/20 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Accessories Fixed frame In combination with bottom base H 30. For fixing onto poured concrete floors and bases. 2 1SL0433A00 1SL0434A00 1SL0435A00 1SL0436A00 Size Description Code Package/ No. of pieces 2/3 Frame for fixing to floor 1SL0433A00 1/2 4 Frame for fixing to floor 1SL0434A00 1/2 5 Frame for fixing to floor 1SL0435A00 1/2 6 Frame for fixing to floor 1SL0436A00 1/2 Full covers 1SL0451A00 1SL0452A00 1SL0454A00 1SL0455A00 1SL0456A00 Description Code Package/ No. of pieces Full cover for size 1 switchboards 1SL0451A00 1/1 Full cover for size 2-3 switchboards 1SL0452A00 1/1 Full cover for size 4 switchboards 1SL0454A00 1/1 Full cover for size 5 switchboards 1SL0455A00 1/1 Full cover for size 6 switchboards 1SL0456A00 1/1 Ventilation kit IP21/54 EN0105K EN0150K EN0204K - Composed of plastic grilles (ABS self-extinguishing UL94V0) and filter - Degree of protection without filter IP21 - Degree of protection with filter IP54 - Equipped with pre-mounted gasket Description Dimensions WxW (mm) Code Package/ No. of pieces Grille + air filter kit 105x105 EN0105K 1/1 Grille + air filter kit (cannot be used with Size 1 150x150 EN0150K 1/1 Grille + air filter kit (cannot be used with Size 1 204x204 EN0204K 1/1 Screws not included, use 4 self-tapping screws 2.9x13 or order Code 1SL0384A00 > Rapid selection table page 2/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 2/21 Gemini switchboards Ordering codes Accessories Anti-condensation kit 2 1SL0351A00 - Kit made of special material to prevent condensation from forming inside the switchboard: it includes GORETM MEMBRANE VENTING - Impermeable to water (pressure): 0.6 bar/60 sec. - Air flow: 400 ml/min. (dp = 70 mbar) - 1 kit for sizes 1-2, 2 kits for sizes 3-4 and 3 kits for sizes 5-6 are recommended to guarantee adequate dissipation. In any case the number of kits to be installed depends on the number and type of devices installed inside the switchboard. Description Code Package/ No. of pieces Anti-condensation kit 1SL0351A00 1/6 Horizontal Gemini kit Kit to use for opening switchboard upwards in correct manner. Code Package/ No. of pieces Horizontal Gemini Kit size 2 1SL0470A00 1/1 Horizontal Gemini Kit size 3/4 1SL0471A00 1/1 Horizontal Gemini Kit size 5 1SL0472A00 1/1 Horizontal Gemini Kit size 6 1SL0473A00 1/1 Description Code Package/ No. of pieces Universal drill bit 12 849 1/30 Module covers in grey RAL 7035, 4 modules 12 863 25/300 Deep adapters 12 851 10/80 Small bag containing base plates 1SL0380A00 1/10 Small bag containing DIN supports 1SL0381A00 1/10 Small bag containing partial plate 1SL0382A00 1/10 Small bag containing screws and inserts 1SL0397A00 1/10 Description Other accessories > Rapid selection table page 2/4 Small bag containing ventilation kit fastening 1SL0384A00 screws 10/50 Spare spanner 1/10 > In-depth technical information page 6/1 2/22 1STC008001D0204 | ABB Technical catalogue 1SL0457A00 > Overall dimensions page 7/1 Gemini switchboards Examples of configurations Gemini switchboards 12 mod. DIN dim.300x250x180 (400x335x210) mm (external hxwxd) IP66 Description Code Q.ty Box + transparent door 1SL0211A00 1 No. 2 uprights 1SL0283A00 1 DIN rail kit (DIN rail + panel) H=150mm 1SL0307A00 2 Gemini switchboards 18 mod. DIN dim.450x375x230 (550x460x260) mm (external hxwxd) IP66 Articolo Prezzo EUR Description Code Box + transparent door 1SL0212A00 1 Q.ty No. 2 uprights 1SL0284A00 1 Modular plate 1 mod.DIN H=150mm 1SL0297A00 1 Blank panel 1 mod.DIN H=150mm 1SL0325A00 1 DIN rail kit (DIN rail+panel) 1+1/2 mod. H=225mm 1SL0313A00 1 Blank panel 1/2 mod. H=75mm 1SL0319A00 1 Module covers 12863 1 Gemini switchboards 18 mod. DIN dim.600x375x230 (700x460x260) mm (external hxwxd) IP66 Code Box + transparent door 1SL0213A00 1 No. 2 uprights 1SL0285A00 1 Kit for Tmax H=150mm 1SL0336A00 1 DIN rail kit (DIN rail + panel) 1 mod. H=150mm 1SL0308A00 2 DIN rail 1SL0291A00 1 Blank panel 1 mod. DIN H=150mm 1SL0325A00 1 > Rapid selection table page 2/4 Articolo Prezzo EUR Description > In-depth technical information page 6/1 Q.ty > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 2/23 2 Gemini switchboards Examples of configurations Gemini switchboards 24 mod. DIN dim.600x500x230 (700x590x260) mm (external hxwxd) IP66 2 Description Code Q.ty Box + transparent door 1SL0214A00 1 No. 2 uprights 1SL0285A00 1 DIN rail kit (DIN rail+panel) 1 mod. H=150mm 1SL0309A00 3 Blank panel 1 mod. H=150mm 1SL0326A00 1 Wiring kit (Fix-O-rapid+wiring duct 25x60mm) 1SL0355A00 2 DIN rail 1SL0292A00 1 Module covers 12863 1 Gemini switchboards 24 mod. DIN dim.750x500x330 (855x590x360) mm (external hxwxd) IP66 Description Code Q.ty Box + transparent door 1SL0215A00 1 No. 2 uprights 1SL0286A00 1 Kit for Tmax H=150mm 1SL0337A00 1 Modular plate H=300mm 1SL0303A00 1 Blank panel H=300mm 1SL0332A00 1 DIN rail kit (DIN rail+panel) 1+1/2 mod. H=225mm 1SL0314A00 1 Front blind panel 1/2 mod. H=75mm 1SL0320A00 1 Module covers 12863 1 Gemini switchboard 36 mod. DIN dim.900x750x330 (1005x840x360) mm (external hxwxd) IP66 > Rapid selection table page 2/4 Description Code Q.ty Box + transparent door 1SL0216A00 1 No. 2 uprights 1SL0287A00 1 Modular plate H=300mm 1SL0304A00 1 Blank panel H=300mm 1SL0333A00 1 DIN rail kit (DIN rail + panel) 1+1/2 mod. H=225mm 1SL0315A00 1 Blank panel 1/2 mod. H=75mm 1SL0321A00 1 DIN rail kit (DIN rail+panel) 1 mod. H=150mm 1SL0310A00 2 Wiring kit (Fix-O-rapid+wiring duct 25x60mm) 1SL0356A00 1 Wiring kit (Fix-O-rapid+wiring duct 40x60mm) 1SL0363A00 1 > In-depth technical information page 6/1 2/24 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu L modular structures General 3/2 Selection of the structure 3/4 Kit for installing apparatus 3/6 Distribution systems 3/13 Ordering codes 3/22 Examples of configurations 3/50 3 ABB Technical catalogue | 1STC008001D0204 3/1 ArTu L modular structures General The ArTu L range is composed of structures consisting of modular kits which can be built up in different combinations able to cover applications of terminal distribution switchgear, both wall-mounted up to 400 A and floor-standing up to 800 A. 3 The overall dimensions are reduced thanks to the depth of just 200 mm for the former and 240 mm for the latter. Both versions can be placed side-by-side with other structures and with cable risers with a width of 300 mm. Modular apparatus of the System pro M series, moulded-case * T series up to T6 800 A, XT series up to XT4, (fixed version with front terminals) circuit-breakers are housed inside the ArTu L switchgear, with a capacity of 24 or 36 modules per row. 3/2 1STC008001D0204 | ABB Technical catalogue Apart from in the traditional plain and pre-drilled versions with 200 mm height, the modular panels are also available in the 150 mm height, which allows optimisation of the space available. Cabling becomes simpler, thanks to the structure which is completely open: in fact, it is possible to conveniently carry out cabling horizontally on trestles inside the workshop or on the building site with the switchgear completely open and then only complete its assembly when cabling has been completed. It is possible to use the rapid Unifix (H and L) cabling system. Furthermore, the kit for fixing the circuit-breakers further simplifies the job, thanks to the practical rapid snap-on hooking up system and the standardised small items. The degree of protection goes from IP31, for the versions without door, up to IP43 for the versions with door. Lateral access is guaranteed, as is the possibility of mounting the vertical wiring duct both on the right, on the left and horizontally. The 400 and 800A busbar system with shaped section, with prefabricated connections between circuit-breakers and busbars placed in the various situations can be used. It is always possible to use the traditional flat busbars for capacities up to 630A. An accessory box is available, to be placed above the switchgear roof, which increases the space available for the incoming cables and, together with the distribution frame, makes distribution simpler. The maximum form of segregation, which can be obtained, is type 2. A system of busbars of 400 and 800A with shaped section can be used with prefabricated connections between circuit-breakers and busbars placed in the different situations. Wiring becomes easier thanks to the completely open structure, and it is in fact possible to wire without problems horizontally on trestles. Technical characteristics Wall-mounted Floor-standing D=204mm D=240mm Compliance with Standards CEI EN 60439-1/IEC 61439-1-2 CEI EN 60439-1/IEC 61439-1-2 Rated service voltage Ue up to 690 V up to 690 V Rated insulation voltage Ui up to 1000 V up to 1000 V Rated frequency 50-60 Hz 50-60 Hz Rated impulse withstand voltage Uimp 6 kV 8 kV Rated current In up to 400 A up to 800 A Rated short-time short-circuit withstand current Icw up to 25 kA up to 35 kA peak current Ipk up to 52.5 kA up to 74 kA Degree of protection IP 31 without door 31 without door 43 with door 43 with door ABB Technical catalogue | 1STC008001D0204 3/3 3 ArTu L modular structures Selection of the structure Selection of the structure 24/36 mod. 24/36 mod. 150 150 (D) D (690/890) 600/800 50 200 200 50 H (H) 3 Blind side cover Structures No. vert. mod. No. installable No. installable H=100mm DIN modules DIN modules Functional dimensions (2) External overall dimensions (1) Wall-mounted back of structure (3) Floor-standing back of structure Side cover Including roof and base Including roof and base DIN panel DIN panel 24/36 modules 24/36 modules H=150mm H=200mm (H) mm 6 96 (24x4) 72 (24x3) 650 8 120 (24x5) 96 (24x4) 850 10 144 (24x6) 120 (24x5) 1050 12 192 (24x8) 144 (24x6) 1250 1200 14 216 (24x9) 168 (24x7) 1550 1400 SL1400 16 240 (24x10) 192 (24x8) 1750 1600 SL1600 MC1600 18 288 (24x12) 216 (24x9) 1950 SL1800 MC1800 20 312 (24x13) 240 (24x10) 2150 2000 SL2000 MC2000 14 324 (36x9) 252 (36x7) 1550 1400 SL1408 MC1400 16 360 (36x10) 288 (36x8) 1750 1600 SL1608 MC1600 18 432 (36x12) 324 (36x9) 1950 SL1808 MC1800 468 (36x13) 360 (36x10) SL2008 MC2000 20 (390) 300 (W) mm (D) mm H W D (4) mm mm mm 600 SL0600 800 690 690 890 204 240 240 2150 1000 1800 1800 600 165 MC0600 SL0800 MC0800 SL1000 MC1000 SL1200 600 195 800 Blind 195 2000 MC1200 MC1400 (D) D H (H) Additional cable container External overall dimensions (1) (H) mm (W) mm Functional dimensions (2) (D) mm 650 850 1050 Wall-mounted cable container H W D (4) mm mm mm 600 390 204 800 1000 (3) Including roof and base Floor-mounted cable container Including roof and base VC0600 300 165 Front door IP43 Plain door PC0602 VC0800 PC0802 VC1000 PC1002 VC1200 PC1202 1250 1200 1550 1400 VC1400 PC1402 1750 1600 VC1600 PC1602 VC1800 PC1802 VC2000 PC2002 1950 390 240 2150 > Selection by components page 3/22 1800 300 195 2000 > In-depth technical information page 6/1 3/4 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 24/36 mod. 24 mod. Removable side panel ZL1000 Side cover 3 ZL1001 ZL3000 Base strip With removable panel Angles Flanges Intermediate uprights Base strip IP43 front doors For side-by-side positioning Angle for side-by-side structures Glass door 24/36 mod. Internal cable Connection container box Glass door 24 mod. + int Blind door cable container 24/36 mod. MI0600 PV0600 PC0601 MI0800 PV0800 PC0801 MI1000 PV1000 PC1001 MI1200 PV1200 PC1201 LF1400 MI1400 PV1400 PC1401 LF1600 MI1600 PV1600 PC1601 PV1800 PC1801 LF1800 ZL1000 ZL1001 MI1800 ZL3000 Roof RC1000 LF2000 MI2000 PV2000 LF1400 MI1400 PV1436 PV1424 PC1436 VC1425 LF1600 MI1600 PV1636 PV1624 PC1636 VC1625 PV1836 PV1824 PC1836 VC1825 PV2036 PV2024 PC2035 VC2025 LF1800 ZL1000 ZL1101 LF2000 MI1800 ZL3000 MI2000 ZL1000 Internal doors Base strip Plain door Angles PO1831 PC2001 Connection box Flanges ZL2001 Roof RC2000 PO2031 > Selection by components page 3/22 > In-depth technical information page 6/1 (1) The external overall dimensions of floor-mounted ArTu L switchgear include the palletisable base strip h=100mm (angle and flanges to be ordered separately). (2) The functional dimensions represent the useful space for installing the apparatus. (3) The wall-mounted structures cannot be superimposed. (4) In this catalogue, reference is always made to the 204/240mm depth corresponding respectively to the overall dimensions with front door. The useful dimensions between panel and back of the structure are 165/195mm. Finishing section IP31 See page 3/28 ZL1000 See page 3/28 ZL2001 PO1431 PO1631 IP31 Finishing section > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/5 ArTu L modular structures Selection of the structure Recommended solutions for installation of the apparatus Type of structure/Installation Wall structures 3 Apparatus Vertical on DIN rail Pro M System modular apparatus Connection box Floor structures Vertical Horizontal Vertical on DIN rail Vertical Vertical OT OESA Horizontal OETL Tmax T1 3/4 poles - fixed / front terminals Tmax T1 4 poles - fixed / front terminals + RC mod. Tmax T2 3/4 poles - fixed / front terminals Tmax T2 4 poles - fixed / front terminals + RC mod. Tmax T3 3/4 poles - fixed / front terminals () () () () () () () Tmax T4 3/4 poles - fixed / front terminals () Tmax T4 4 poles - fixed / front terminals + RC mod. Tmax T5 3/4 poles - fixed / front terminals () Tmax T5 4 poles - fixed / front terminals + RC mod. () Tmax T3 4 poles - fixed / front terminals + RC mod. Tmax T3 3/4 poles - fixed / front terminals + divider Tmax T6 3/4 poles - fixed / front terminals Side-by-side Tmax kits Tmax XT1 3/4 poles - fxed / front terminals Tmax XT1 4 poles - fxed / front terminals + RC mod. () () Tmax XT2 3/4 poles - fxed / front terminals Tmax XT2 4 poles - fxed / front terminals + RC mod. Tmax XT3 3/4 poles - fxed / front terminals () () Tmax XT3 4 poles - fxed / front terminals + RC mod. () Tmax XT4 3/4 poles - fxed / front terminals () Tmax XT4 4 poles - fxed / front terminals + RC mod. Side-by-side Tmax XT kits () () () () () Busbars with shaped section Linear busbar holder Flat busbar Linear busbar holder Scaled busbar holder Scaled busbar holder () Unifix L Unifix H () Can also be installed in the additional cable container. () Can only be installed in the additional cable container. > Selection by components page 3/22 > In-depth technical information page 6/1 3/6 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu L modular structures Kit for installing apparatus Kit for System Pro M, ≤160 OT modular apparatus, Tmax T1-T2-T3, XT1 and XT3, and supports for Unifix H AD1086 PM6672 AD1086 PM3872 PM3648 PM1500 AD1600 GD1520 GD1530 W=300mm W=600mm Panel 1 DIN row 36 mod.DIN PM1500 GD1530 PM1536 PM2624 GD1530 PM2836 PM2312 GD1530 PM2315 GD1520 GD1520 300 (2) GD1520 300 2x GD1520 600 3x GD1520 H (mm) DIN rail kit 12 mod.DIN W=800mm DIN rail kit 36 mod.DIN DIN rail kit 24 mod.DIN Panel 1 DIN row 24 mod.DIN Panel 1 DIN row 12 mod.DIN 3 PM1536 Panel 2 DIN row 48 mod.DIN Panel 3 DIN row 72 mod.DIN Panel 2 DIN row 72 mod.DIN Standard alluminium version Floor Wall GD1512 GD1515 150 (1) 200 PM2612 PM3648 (1) PM3872 (1) 2x GD1530 PM6672 Unifix H fixing brackets 300 AD1097 (1) Only for modular System Pro M (2) Version for Tmax with differential module underplaced RC 221/222. PM3624 AD1097 PM3836 Completion items for installation on DIN rail Screw fixing of ducts up to 100x100mm. 0527. 05198 (100x100) Supports for horizontal wiring duct AD1096 AD1098 OF F OF F 05 258 OF F 05198 (100x100) Fixing with rapid hooking base of ducts up to 100x100mm. AD1096 AD1098 05198 (100x100) Allows assembly of the cabling wiring duct horizontally and vertically up to 100x100mm (in the case of installation in floor-mounted structure with removable side panel LF.... the vertical wiring duct has maximum dimensions of 100x80mm hxw). The support AD1098 has compensation drillings as the height and width of the wiring duct varies. The accessory is also prepared with ø7mm holes for assembly of the ABB wiring duct by means of the Fix-O-rapid hook. Code AD1096 AD1098 Depth adapter Code AP6000 OF F F AP6000 05198 (100x100) DIN cut-out hole covers Code AD1086 AD1088 AD1089 Description Depth adapter W=600mm for side-by-side Pro M - Tmax T1-T2-T3-XT1- XT3 Polished flange for Tmax XT2-XT4 positioned side by side on plate OF F OF Description Support for horizontal/vertical wall-mounted wiring duct Support for horizontal/vertical floor-mounted wiring duct Description Hole covering strip DIN W=2000mm - grey RAL 7035 Hole covering strip DIN 24 modules - grey RAL 7035 Hole covering strip DIN 36 modules - grey RAL 7035 > Selection by components page 3/22 > In-depth technical information page 6/1 Code AD3310 AD3311 AD3312 AD3313 Description AD3310 Polished flange for plate-mounted XT2 3P AD3311 Polished flange for plate-mounted XT2 4P AD3312 Polished flange for plate-mounted XT4 3P AD3313 Polished flange for plate-mounted XT4 4P Tmax XT2-XT4 on DIN rail cannot be mounted in ArTu switchboards. > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/7 ArTu L modular structures Kit for installing apparatus Horizontal installation 3 Fixed Wall-mounted structures Floor-mounted structures Circuit-breaker front terminals No. poles Dimensions Structure 24 DIN mod. H (mm) W=600mm Structure 24 DIN mod. W=600mm Structure 36 DIN mod. W=800mm Tmax T1 3-4 200 LK1000 LK1100 Tmax T1 CB + RC mod. 4 200 LK1000 LK1004 (1) LK1004 (1) LK1104 (1) Tmax T2 3-4 200 LK2000 LK2000 LK2100 Tmax T2 CB + RC mod. 4 200 LK2004 LK2004 LK2104 Tmax T3 3-4 200 LK3000 LK3000 LK3110 Tmax T3 CB + RC mod. 4 300 LK3004 LK3004 LK3104 LK4003 LK4003 Tmax T3 CB + distr. frame 3-4 200 Tmax T4 3-4 200 LK3301 LK4103 Tmax T4 CB + RC mod. 4 200 LK4004 LK4004 LK4104 Tmax T5 3-4 300 LK5003 LK5003 LK5103 LK5104 Tmax T5 CB + RC mod. 4 300 LK5004 LK5004 Tmax XT1 3(2)/4 200 LX1000 LX1000 LX1100 Tmax XT1 CB + RC mod. 4 200 LX1005 LX1005 LX1104 Tmax XT2 3(2)/4 200 LX2000 LX2000 LX2004 Tmax XT2 CB + RC mod. 4 200 LX2004 Tmax XT3 3(2)/4 200 LX3000 LX3000 LX3110 Tmax XT3 CB + RC mod. 4 300 LX3004 LX3004 LX3104 Tmax XT4 3(2)/4 200 LX4003 LX4003 Tmax XT4 CB + RC mod. 4 200 LX4004 LX4004 (1) Version for Tmax with differential module underplaced RC 221/222. (2) For 3 poles breakers please order accessory flange codes: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting AD3308 XT4 3P Flange for plate-mounting. > Selection by components page 3/22 > In-depth technical information page 6/1 3/8 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Vertical installation 3 Fixed Wall-mounted structures Circuit-breaker front terminals No. poles Tmax T1-T2-T3-XT1-XT3 on DIN ral Floor-mounted structures Dimensions Structure 24 DIN mod. Cable container side H (mm) W=600mm by side W=300mm Structure 24 DIN mod. Structure 36 DIN mod. Cable container side W=600mm W=800mm by side W=300mm 200 (see page 3/6) (vedere pag. 3/6) (vedere pag. 3/6) (vedere pag. 3/6) Tmax T1 3-4 200 LK1001 LK1001 LK1101 LK1002 Tmax T1 CB+RC mod. 4 300 Tmax T1 No.4 CBs side by side 3-4 200 LK4100 LK4100 LK4108* Tmax T2 No.3 CBs side by side 3 200 LK2001 LK2001 LK2101 Tmax T2 CB+RC mod. 4 300 Tmax T2 No.4 CBs side by side 3-4 200 LK3200 Tmax T3 3-4 300 LK3001 Tmax T3 CB+RC mod. 4 300 Tmax T3 No.3 CBs side by side 3-4 Tmax T4 Tmax T4 CB+RC mod. LK1008 (1) LK2002 LK2008 LK3200 LK3003 LK3111** LK3001 LK3101 LK3002 LK3005 LK3005 LK3105 LK3008 300 LK3300 LK3300 3-4 400 LK4005 LK4005 LK4105 4 500 LK4006 LK4006 LK4106 Tmax T5 3-4 400 LK5005 LK5005 LK5105 LK5007 Tmax T5 CB+RC mod. 4 500 LK5006 LK5006 LK5106 LK5008 Tmax T6 3-4 500 LK6011 LK6012 Tmax XT1 3(2)-4 200 LX1001 LX1001 LX1101 LX1002 Tmax XT1 CB+RC mod. 4 300 LX1006 LX1006 LX1108 LX1008 Tmax XT1 No.3 CBs side by side 3(2)-4 200 LX4100 LX4100 Tmax XT2 3-4 200 LX2001 Tmax XT2 3-4 300 Tmax XT2 CB+RC mod. 4 300 Tmax XT2 No.3/4(3) CBs s by s 3-4(4) 200 LX3200 Tmax XT3 3(2)-4 300 LX3001 LX3001 LX3101 LX3002 Tmax XT3 CB+RC mod. 4 300 LX3005 LX3005 LX3105 LX3008 Tmax XT3 No.2 CBs side by side 3(2)-4 300 LX3300 LX3300 Tmax XT4 3(2)-4 300 LX4005 LX4005 Tmax XT4 CB+RC mod. 4 400 LX4006 LX4006 Tmax XT4 No. 3/4(3) interr. affiancati 3-4(4) 300 LX4008 LX4008 LX2001 LK3102** LK4007 LX2101 LX2300 LX2002 LX2008 LX3200 LX3003 LX4007 * No. 5 circuit-breakers only for structures W=800mm. ** No. 4 circuit-breakers only for structures W=800mm. (1) Version for Tmax with differential module underplaced RC 221/222. (2) For 3 poles breakers please order accessory flange codes: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting AD3308 XT4 3P Flange for plate-mounting. (3) No. 4 CBs side by side 3P, No. 3 CBs side by side 4P. (4) Order AD3310, AD3311, AD3312, AD3313. > Selection by components page 3/22 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/9 ArTu L modular structures Kit for installing apparatus Plain back plates, plain and ventilated panels PF.... PC.... PR.... PA.... 3 Back plates Panels Plain flat Plain flat Structure 36 DIN mod. W=800mm Structure 36 DIN mod. W=800mm 50 PC1050 PC0580 100 PC1600 PC1800 150 PC1150 PC1580 PC2600 PC2800 PC2401 PC3600 PC3800 PC3401 PC4600 PC4800 PC6600 PC6800 PC8401 200 PF1002 PF1102 300 PF1003 PF1103 400 PF1004 PF1104 600 PF1006 PF1106 800 PF1008 PF1108 Cable container W=300mm Plain recessed Structure 24 DIN mod. W=600mm H (mm) Structure 24 DIN mod. W=600mm PC0300 PC0600 PC8600 PC8800 1600 PC1660 PC1680 1800 PC1860 PC1880 2000 PC2060 PC2080 Cable container W=300mm Structure 24 DIN mod. W=600mm Ventilated Structure 36 DIN mod. W=800mm Cable container W=300mm PC1403 PA1600 PR2600 PR2800 PC4401 PR4600 PR4800 PC6401 PR6600 PR6800 PA2600 PR4401 Useful internal space Wall-mounted structure Floor-mounted structure Cable connection box 124 Recessed panel 154 159 223 189 Flat panel Recessed panel 59 29 Flat panel 59 29 > Selection by components page 3/22 > In-depth technical information page 6/1 3/10 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Structure 24 DIN mod. W=600mm Kit for OT160÷400 3 Dimensions (mm) Description Code H W Pole Maximum handle lenght Minimum shaft lenght Kit OT160/200/250/315/400 vertical KO1260 300 600 E03-04 Decentralized Control 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT160/200/250/315/400 horizontal KO1261 300 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT160/200/250/315/400 vertical KO1280 300 800 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT160/200/250/315/400 horizontal KO1281 300 800 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT160/200/250/315/400 vertical KO1262 300 300 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Panels for square measuring instruments These allow installation of measuring instruments and relative changeover switches. EV1135 EV1136 2-instrument panel 4-instrument panel 72x72mm 96x96mm 72x72mm 96x96mm H (mm) 24 mod.DIN W=600mm 36 mod.DIN W=800mm 24 mod.DIN W=600mm 36 mod.DIN W=800mm 24 mod.DIN W=600mm 36 mod.DIN W=800mm 24 mod.DIN W=600mm 36 mod.DIN W=800mm 200 PS2720 PS2728 PS2960 PS2968 PS4720 PS4728 PS4960 PS4968 Square instrument hole covers Code Description EV1135 Hole cover of 72x72mm instrument black RAL 9005 EV1136 EV1136 Hole cover of 96x96mm instrument black RAL 9005 > Selection by components page 3/22 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/11 ArTu L modular structures Kit for installing apparatus Installation of terminal boxes on DIN rail AD1099 AD1099 3 AA1001 Terminal box mounting position Installation on DIN rail Structure Internal cable container Cable container side-by-side Horizontal Box AD1099 Horizontal angled 45° AA1001 Vertical AD1005 AD1099 Installation of terminal boxes on DIN rail and earthing busbar EV1110 EV1112 EV1119 Angled supports for terminal boxes and earthing busbar Code Description EV1110-EV2110 Angled supports 1 row of terminals EV1112-EV2112 Angled supports 1 row of terminals + earth > Selection by components page 3/22 > In-depth technical information page 6/1 3/12 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Distribution systems Modular dividers Single-pole Code Three-poles AD1076 AD1080(1) AD1007 AD1081(2) AD1030 AD1031 AD1075 AD1006 In (A) 125 125 175 175 250 400 125 175 Icw (kA) 4.4 4.2 11 11 21 21 4.4 11 Version pole 1 1 1 1 1 1 3 3 DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate min. 10 6 16 10 35 95 10 16 max 35 35 70 70 35 70 6 6 Installation Power supply Ø cable (mm2) No. outgoing feeder Ø cable (mm2) 1,5÷10 2,5÷16 10 6 10 6 2,5÷25 Dimensions HxWxD (mm) No. DIN modules 120 185 4 4 5 5 2 2 3 71x45x42,5 74x27x47 71x45x42,5 92x35x49 95.5x45x49 95.5x45x49 71.5x80x42,5 71.5x80x42,5 2,5 1,5 2,5 2 3 3 4.5 4.5 Rated service voltage Ue (V) 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc Degree of protection IP 20 20 20 20 20 20 20 20 Four poles Code AD1004 AD1028 AD1029 AD1027 AD1034 AD1053 In (A) 125 125 125 160 250 250 Icw (kA) 10 4.2 4.2 6.2 15 15 Ipk (kA) 24 25 25 20 30 30 Version poli 4.2 4 4 4 4 4 DIN35/plate DIN35/plate DIN35/plate DIN35 with AD1038 brackets with AD1038 brackets 6 6 6 10 25 with cable terminal 25 with cable terminal 50 No. 22 holes M5 with 17,5mm pitch per phase (threaded busb. 20x5mm) No. 32 holes M5 with 17,5mm pitch per phase (threaded busb. 20x5mm) Installation Power supply Ø cable (mm2) min. max No. outgoing feeder Ø cable (mm2) 35 1/6 5/phase 1.5/6 4/neutral 1.5/10 2/phase 7 9 6/neutral 1.5/16 2 2.5/16 Dimensions HxWxD (mm) No. DIN modules 8 6/25 2 2 3 74.5x98x45 93x89x48 96x126x48 90x160.5x50 150x600x70 150x800x70 5,5 5 7 9 24 36 500 500 Rated service voltage Ue (V) 1000 Vac 1500 Vdc 440 440 440 Degree of protection IP 20 20 20 20 (1) Possibility of putting in parallel with AD1083 connections. (2) Possibility of putting in parallel with comb type connection (not supplied). > Selection by components page 3/22 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/13 ArTu L modular structures Distribution systems Flexible busbars up to 1000 A Cross-section Capacity (A) Dimensions IP31 IP41 IP65 WxW (mm) Section dimensions (mm2) Lenght (mm) Weight (kg) In (A) Code No. busbar/ phase 250 BF1602 1 395 323 250 20x3 60 2000 1,42 400 BF2502 1 498 460 400 20x5 100 2000 2,15 500 BF4002 1 660 620 500 24x6 144 2000 3 630 BF4012(1) 1 758 702 630 32x5 160 2000 3,36 1000 BF6302 1 1203 1140 1000 40x8 320 2000 6,33 3 (1) Only for front extended terminals and rear terminals. Busbars with shaped section for applications up to 800 A Cross section Capacity (A) Dimensions IP31 IP41 IP65 WxW (mm) Section dimensions (mm2) Lenght (mm) Weight (kg) In (A) Code No. busbar/ phase 520 BA0400 1 630 520 35 20x20 200 1730 4 830 BA0800 1 970 830 35 20x20 200 1730 4,4 > Selection by components page 3/22 > In-depth technical information page 6/1 3/14 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Selection of busbar holders and crosspieces Vertical installation 1 Back of structure Horizontal installation 2 Back of cable container 4 Back of cable connection box 3 Direct connection with Unifix H 3 Busbar holder Type Crosspieces for fixing to structure Busbars with shaped section In ≤ 400÷800A Installation Scaled up to 800A PB0802 Structure 2 Cable container Internal cable container TL2000 (W=300mm) TL2100 W=200mm) Cable connection box BA0400 BA0800 4 Linear up to 800A PB0803 TL2000 (H=300mm) TL1000 (W=600mm) TL1100 (W=800mm) 1 TL3000 (W=300mm) 2 BA0400 BA0800 TL1000 (W=600mm) TL1100 (W=800mm) 3 4 TL3000 (H=300mm) Table for selection and assembly of busbars with shaped section and busbar holders The use of the correct number of busbar holders ensures resistance to electrodynamic forces in the case of a short-circuit. Assess the maximum distance (max X) which must not be exceeded between two consecutive busbar holders according to the max. Icc. 1/4 X X X The distance between the first busbar holder and the end of the busbar must not exceed 1 /4 of “X”. 1/4 X No. of busbar holders according to the max. Icc Busbar Capacity Busbar holder No.busbars per phase 25 kA X max (mm) 35 kA X max (mm) 50 kA X max (mm) 65 kA X max (mm) 75 kA X max (mm) 85 kA X max (mm) X max 100 kA (mm) Linear BA0400 400A PB0803 1 4 550 5 425 - - - - - - - - - - BA0800 800A PB0803 1 4 550 4 550 - - - - - - - - - - Scaled BA0400 400A PB0802 1 4 550 4 550 - - - - - - - - - - BA0800 800A PB0802 1 4 550 4 550 - - - - - - - - - - max X = maximum distance not to be exceeded between two consecutive busbar holders. > Selection by components page 3/22 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/15 ArTu L modular structures Distribution systems Prefabricated kits for connections between apparatus and busbars with shaped section 400/800 A 3 Apparatus Connection kit Type of installation From circuit-breaker in structure towards busbars in cable container From circuit-breaker in cable container towards busbars in structure From circuit-breaker in structure towards busbars on back of structure From circuit-breaker in cable container towards busbars on back of structure Type of busbar holder Scaled PB0802 Linear PB0803 Linear PB0803 Linear PB0803 Apparatus with front terminals fixed horizontal installation Tmax T1 4 poles KB1001(1) Tmax T2 4 poles KB1001 Tmax T3 4 poles KB1002 Tmax T5 4 poles KB1020 Tmax T5 4 poles CB + diff. mod. KB1021 Apparatus with front terminals fixed vertical installation Tmax T3 (1) (2) 4 poles KB1006 KB1010 KB1014 / KB1018(2) KB1014 / KB1018(2) KB1006 KB1010 KB1014 KB1014 Tmax T3 4 poles (w/mount. struct) Tmax T3 4 poles CB + diff.mod. Tmax T5 4 poles KB1022 KB1024 Tmax T5 4 poles CB + diff.mod. KB1022 KB1024 KB1019 For Tmax T1 fit the circuit-breaker with extended terminals. KB1018: only with flat busbars and scaled busbar holder. Use of prefabricated kits B A C Dimensions of the conductors Apparatus AxBxC (mm) Cross-section (mm2) Tmax T1-T2 - 50 Tmax T3 20x5x1 150 Tmax T5 - 630A 32x6x1 - The use of the prefabricated connection kits is only possible with the cable container mounted on the right of the structure. > Selection by components page 3/22 > In-depth technical information page 6/1 3/16 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Flat busbars for distribution up to 630 A Capacity (A) Cross-section In (A) Code No. busbar/ phase IP31 275 BR0250 1 440 BR0400 695 BR0630 Dimensions IP43 Icw max (kA) WxW (mm) Lenght (mm) Weight (kg) 290 275 23 15x5 1750 1,35 1 475 440 23 25x5 1750 1,8 1 750 695 32 30x10 1750 4,4 3 Table for selection and assembly of busbars with flat section and busbar holders Vertical installation 1 Flat busbar Busbar rolder type In = 250A Scaled up to 630A BP0634 Back of structure Horizontal installation 2 Back of cable container In = 400A In = 630A Installation Structure 2 Cable container 1 TL3000 (H=300mm) TL1000 (W=600mm) TL1100 (W=800mm) TL3000 (W=300mm) 3 > In-depth technical information page 6/1 Cable connection box TL3000 (W=300mm) 2 > Selection by components page 3/22 Back of cable connection box Crosspieces for fixing to structure 3 Linear up to 800A BP0630 3 TL3000 (H=300mm) > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/17 ArTu L modular structures Distribution systems Table for selection and assembly of busbars with flat section and busbar holders The use of the correct number of busbar holders ensures resistance to electrodynamic forces in the case of a short-circuit. Assess the maximum distance (max X) which must not be exceeded between two consecutive busbar holders according to the max. Icc. 1/4 X 3 X X 1/4 X The distance between the first busbar holder and the end of the busbar must not exceed 1/4 of “X”. No. of busbar holders according to the max. Icc Busbar Busbar holder Capacity No. busbars per phase 25 kA X max (mm) 35 kA X max (mm) 50 kA X max (mm) 65 kA X max (mm) 1 11 175 15 125 18 100 - - 1 9 225 15 125 18 100 - - BR0250 250A BR0400 400A BR0630 630A 1 9 225 15 125 18 100 - - BR0250 250A 1 4 500 6 350 10 200 - - BR0400 400A 1 4 500 6 350 10 200 - - BR0630 630A 1 - - 4 600 4 600 9 210 BP0634 BP0630 max X = maximum distance not to be exceeded between two consecutive busbar holders Flat drilled and threaded busbars for earthing connections Cross-section 5 Pitch WxW (mm) Length (mm) AxB (mm) EV1119 6 MA 20 20x5 2000 EV1120 6 MA 20 25x5 2000 EV1121 6MA 25 50x5 2000 EV1122 6MA 34x30 EV1123 8MA 34x30 EV1124 6MA 40x50 EV1125 8MA 40x50 6MA 20 25 5 Threading 6MA 20 20 5 Code 6MA 25 50 A B > Selection by components page 3/22 > In-depth technical information page 6/1 3/18 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Unifix systems Technical characteristics Unifix H Unifix L Rated service voltage (Ue) 690V AC 400V AC Rated insulation voltage (Ui) 1000V AC 500V AC Rated impulse withstand voltage (Uimp) 8kV 6kV Rated frequency 50/60Hz 50/60Hz central power supply 400A 100A lateral power supply 320A 80A Rated current (In) Rated short-time withstand current (Icw) 25kA Maximum peak current (Ipk) 52,5kA-400V Maximum installable circuit-breaker size 250A Conditioned short-circuit current (Icc) Tmax T1 36kA-400V Tmax T2 N, S (1) 50kA-400V Tmax T3 50kA-400V Tmax XT1 50kA-400V Tmax XT3 50kA-400V With circuit-breaker 3 100A S200 6kA-400V S200M 10kA-400V S200P Degree of protection 25kA-400V IP20 with accessory IP20 Characteristics of the insulating material Self-extinguishing thermoplastic V1 (UL94) Self-extinguishing thermoplastic V1 (UL94) Characteristics of the conductor material Electrolytic copper Electrolytic copper Width (No. modules/mm) 24/600 36/800 12/400 24/600 36/800 Installation of Unifix system Frame for Tmax T and Tmax XT series 300x600mm (HxL) ED2183 300x800mm (HxL) ED2191 Fixing brackets H=300mm AD1097 Crosspiece for direct connection to W=600mm the rear busbars with shaped section W=800mm with PB0803 TL1000 Busbar 2P Busbar 4P Fixing support (1) TL1100 12 mod. ED2993 18 mod. ED3009 24 mod. ED3017 36 mod. ED3025 12 mod. ED2944 18 mod. ED2951 24 mod. ED2969 36 mod. ED2977 24 mod. GD1520 36 mod. GD1530 Select circuit-breakers in version with front terminals for copper cables. > Selection by components page 3/22 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/19 ArTu L modular structures Distribution systems Unifix systems Table for selecting connections according to the circuit-breaker 3 Series of circuit-breakers Unifix H SN201 DS941 (top power supply) ED2654 L1/N 40A ED2662 L2/N 40A ED2670 L3/N 40A (top power supply) ED2531 L1 63A ED2549 L2 63A ED2556 L3 63A ED2564 N 63A ED2845 False pole module (top power supply) ED2557 L1 ≤32A ED2558 L2 ≤32A ED2559 L3 ≤32A ED2560 N ≤32A ED2551 L1 125A ED2552 L2 125A ED2553 L3 125A ED2554 N 125A ED2550 False pole module (top power supply) ED2720 L1 100A ED2738 L2 100A ED2746 L3 100A ED2753 N 100A (top power supply) ED2894 L1/N 16A ED2902 L1/L2 16A S200 - DS200 F200 up to 63A (Unifix L) S800 S280 (80-100A) E200 up to 100A - RS370 - F200 80/100A (Unifix H) MDRC - Various apparatus Tmax T1 Tmax XT1 Tmax T2 Tmax T3 Tmax XT3 Circuit-breaker Residual current Selenoid operator Circuit-breaker Residual current Selenoid operator Circuit-breaker Residual current (top/bottom power supply) ED2217 L1 Top/L2 Bottom ED2225 L2 Top/L1 Bottom ED2233 L3 Top/N Bottom ED2241 N Top/L3 Bottom ED2373 False pole module ED2381 False pole module (top/bottom power supply) ED2258 L1 Top/L2 Bottom ED2266 L2 Top/L1 Bottom ED2274 L3 Top/N Bottom ED2282 N Top/L3 Bottom ED2373 False pole module ED2399 False pole module (top power supply) ED2290 L1 ED2308 L2 ED2316 L3 ED2324 N ED2373 False pole module Unifix L ED3272 L1/N 40A ED3280 L2/N 40A ED3298 L3/N 40A (bottom power supply) ED2572 L1 63A ED2590 L2 63A ED2598 L3 63A ED2606 N 63A ED3033 L1 100A ED3041 L2 100A ED3058 L3 100A ED3066 N 100A ED3132 pow. supply L1/L2/L3/N - 350mm ED0026 pow. supply L1/L2/L3/N - 1500mm ED0025 pow. supply L1/L2/L3/N - 2500mm (bottom power supply) ED2910 L1/N 16A ED2928 L1/L2 16A ED3108 pow. supply 2 cables L1/N 16A ED3116 pow. supply 3 cables L1/L2/L3 16A ED3124 pow. supply 4 cables L1/L2/L3/N 16A ED3355 pow. supply 2 cables L1/N 40A ED3363 pow. supply 3 cables L1/L2/L3 40A ED3371 pow. supply 4 cables L1/L2/L3/N 71A (bottom power supply) ED2332 L1 ED2340 L2 ED2357 L3 ED2365 N For the DDA locks, order the false module ED2845 codes separately according to the size of the residual current lock. If mounting XT1-XT3 on Unifix H, the polished flanges AD3301, AD3302, AD3303, AD3304 must also be ordered, see spare parts page 3/49. > Selection by components page 3/22 > In-depth technical information page 6/1 3/20 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Unifix systems Direct connection with the 400/800A system of busbars with shaped section. Feeder module for 400A frame (L1-L2-L3-N). 3 Direct power supply of the bases by means of feeder module ED2209. Power supply by means of general row circuit-breaker. N N L1 L1 T T L2 L2 N L3 L3 T N N Connections (L1-L2-L3-N) for System Pro M modular apparatus. Power supply of the busbar with 100A feeder module without cable. Terminal capacity 35mm2. Direct power supply of the busbars by means of feeder module. Power supply by means of modules and cables in parallel. T N T > Selection by components page 3/22 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/21 ArTu L modular structures Ordering codes SL.... Wall-mounted switchgear Wall-mounted switchgear structure Dimensions (mm) MC.... H W D Code Package/ No. of pieces Back, roof and base for structure 600 3 800 1000 600 (24 DIN mod.) 1200 VC.... 165 SL0600 1/1 165 SL0800 1/1 165 SL1000 1/1 165 SL1200 1/1 Additional wall-mounted cable container structure Can be mounted on the right and left of the basic structure, can be used as cable container or as incoming column which can be equipped with kit for Tmax circuit-breakers Dimensions (mm) H W D Code Package/ No. of pieces Back, roof and base for cable container 600 165 VC0600 1/1 800 165 VC0800 1/1 165 VC1000 1/1 165 VC1200 1/1 1000 300 1200 VC.... MC.... Intermediate uprights for lateral side-by-side positioning or external cable container Allows several structures side-by-side on the right and left of the basic one. Dimensions (mm) H Code Package/ No. of pieces Intermediate upright for placing structures side by side MI.... 600 MI0600 1/1 800 MI0800 1/1 1000 MI1000 1/1 1200 MI1200 1/1 Side closure with blind panel Dimensions (mm) H D Code Package/ No. of pieces No. 2 side closures for wall-mounted structures > Rapid selection table page 3/4 600 165 MC0600 1/2 800 165 MC0800 1/2 1000 165 MC1000 1/2 1200 165 MC1200 1/2 > In-depth technical information page 6/1 3/22 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Floor-mounted switchgear SL.... Floor-mounted structure Dimensions (mm) H W D Package/ No. of pieces Code Back, roof and base for structure 1400 1600 1800 ZL1000 600 (24 DIN mod.) 195 SL1400 1/1 195 SL1600 1/1 195 SL1800 1/1 2000 195 SL2000 1/1 1400 195 SL1408 1/1 195 SL1608 1/1 195 SL1808 1/1 195 SL2008 1/1 1600 1800 800 (36 DIN mod.) 2000 3 Internal cable container structure 36 mod. (W=800mm) 800 Only to be ordered for the 36 DIN mod. structures (W=800mm). Consisting of a pair of functional uprights and a blind door complete with two key locks. Can be mounted either on the right or left. Dimensions (mm) H W D Package/ No. of pieces Code Pair of functional uprights and internal blind door VC..25 1400 195 VC1425 (1) 1/1 1600 195 VC1625 (2) 1/1 195 VC1825 (3) 1/1 195 VC2025 (4) 1800 200 2000 (1) For structure SL1408 - (2) For structure SL1608 - 1/1 (3) For structure SL1608 - (4) For structure SL2008 SL.... External cable container VC.... Can be mounted on the right and left of the basic structure, can be used as cable container or as incoming column which can be equipped with kit for Tmax circuit-breakers. Dimensions (mm) H W D Package/ No. of pieces Code Back, roof and base for cable container M.... 1400 195 VC1400 1/1 1600 195 VC1600 1/1 195 VC1800 1/1 195 VC2000 1/1 1800 300 2000 ZL2001 ZL3000 Note: the palletisable base strips (ZL1000 or ZL3000) and the flanges (ZL1001, ZL1101 or ZL2001) must be ordered separately, see page 3/27. ZL1001 ZL1001 Intermediate uprights for lateral side-by-side positioning or external cable container Allows several structures side-by-side on the right and left of the basic one. Dimensions (mm) H Code Package/ No. of pieces Intermediate upright for placing structures side by side > Rapid selection table page 3/4 1400 MI1400 1/1 1600 MI1600 1/1 1800 MI1800 1/1 2000 MI2000 1/1 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/23 ArTu L modular structures Ordering codes Floor-mounted switchgear Side closure with blind panel MC.... Dimensions (mm) Description 3 H D Package/ No. of pieces Code No. 2 fixed side closures 1400 MC1400 1/2 No. 2 fixed side closures 1600 MC1600 1/2 No. 2 fixed side closures 1800 MC1800 1/2 No. 2 fixed side closures 2000 MC2000 1/2 Code Package/ No. of pieces 195 Side closure with removable panel LF.... Dimensions (mm) Description 800 600 300 H D No. 2 removable side closures 1400 LF1400 1/2 No. 2 removable side closures 1600 LF1600 1/2 No. 2 removable side closures 1800 LF1800 1/2 No. 2 removable side closures 2000 LF2000 1/2 Dimensions (mm) H Code Package/ No. of pieces No. 2 angle pieces for structure or cable container 100 ZL1000 1/2 Intermediate angle for side-byside structures 100 ZL3000 1/1 No. 2 structure base strip flanges 600 ZL1001 1/2 No. 2 structure base strip flanges 800 ZL1101 1/2 No. 2 external cable container base strip flanges 300 ZL2001 1/2 195 Base strips Description Angles ZL1000 Plinth covering flanges ZL1101 ZL1001 ZL2001 SL.... VC.... SL.... Example of base strip composition for structures 600 800 600 300 ZL2001 ZL3000 ZL1000 ZL1001 ZL1000 ZL1101 ZL3000 > Rapid selection table page 3/4 > In-depth technical information page 6/1 3/24 1STC008001D0204 | ABB Technical catalogue ZL1001 ZL2001 ZL3000 > Overall dimensions page 7/1 Wall-mounted/floor-mounted switchgear Glass doors P43, 24/36 modules Steel sheet door 15/10 thick with 4mm thick safety glass fitted with polyurethane gasket complete with handle with key with double tab. Reversible, hinged on the right or left. PV0600 PV0800 PV1000 PV1200 Dimensions (mm) H W Package/ No. of pieces Code 3 Glass doors for wall-mounted structures 24 DIN mod. 600 800 600 1000 1200 PV0600 1/1 PV0800 1/1 PV1000 1/1 PV1200 1/1 Glass doors for floor-mounted structures 24 DIN mod. 1400 PV1400 1/1 1600 PV1600 1/1 PV1800 1/1 PV2000 1/1 600 1800 PV1400 PV1600 PV1800 PV2000 PV1436 PV1636 PV1836 PV2036 2000 Glass doors for floor-mounted structures 36 DIN mod. 1400 PV1436 1/1 1600 PV1636 1/1 PV1836 1/1 PV2036 1/1 800 1800 2000 Glass doors for floor-mounted structures 36 DIN mod. + internal cable containers 1400 PV1424 1/1 1600 PV1624 1/1 PV1824 1/1 PV2024 1/1 800 1800 2000 600 600 PV1424 PV1624 PV1824 PV2024 > Rapid selection table page 3/4 600 800 1000 1200 800 800 600 200 1400 1600 1800 2000 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/25 ArTu L modular structures Ordering codes Wall-mounted/floor-mounted switchgear 3 PC0601 PC0801 PC1001 PC1201 PC0602 PC0802 PC1002 PC1202 Blind doors P43, 24/36 modules Steel sheet door 15/10 thick fitted with polyurethane gasket complete with handle with key with double tab. Reversible, hinged on the right or left. Dimensions (mm) H W Package/ No. of pieces Code Blind doors for wall-mounted structures 24 DIN mod. 600 PC0601 1/1 800 PC0801 1/1 PC1001 1/1 PC1201 1/1 600 1000 1200 PC1402 PC1602 PC1802 PC2002 Blind doors for external wall-mounted cable container 600 PC0602 1/1 800 PC0802 1/1 PC1002 1/1 PC1202 1/1 300 1000 1200 Blind doors for floor-mounted structures 24 DIN mod. 1400 PC1401 1/1 1600 PC1601 1/1 PC1801 1/1 PC2001 1/1 600 1800 2000 Blind doors for floor-mounted structures 36 DIN mod. 1400 1600 PC1401 PC1601 PC1801 PC2001 PC1436 PC1636 PC1836 PC2035 800 1800 2000 1/1 PC1636 1/1 PC1836 1/1 PC2035 1/1 Blind doors for external floor-mounted cable container 1400 PC1402 1/1 1600 PC1602 1/1 PC1802 1/1 PC2002 1/1 300 1800 2000 300 300/600 600 800 1000 1200 > Rapid selection table page 3/4 PC1436 1400 1600 1800 2000 > In-depth technical information page 6/1 3/26 1STC008001D0204 | ABB Technical catalogue 600 > Overall dimensions page 7/1 800 Wall-mounted/floor-mounted switchgear Internal door for external cable container Dimensions (mm) PO1431 PO1631 PO1831 PO2031 H W Internal doors for floor-mounted cable container 1400 PO1431 1/1 1600 PO1631 1/1 PO1831 1/1 PO2031 1/1 1800 300 2000 Pavimento Package/ No. of pieces Code 3 Form 2 segregation 600 800 Only for structures without external cable container SH0700 SH0708 SH0600 SH6008 SH0800 SH0808 Dimensions (mm) Description W H Code Package/No. of pieces 200 SH0600 1/1 300 SH0800 1/1 200 SH0700 1/1 200 SH0608 1/1 300 SH0808 1/1 200 SH0708 1/1 24 DIN mod. Segregation kit Segregation kit 600 Base/head segregation kit 36 DIN mod. SH0700 SH0708 Segregation kit Segregation kit 800 Base/head segregation kit Vertical segregations SV.... Only for external cable container without structure Dimensions (mm) > Rapid selection table page 3/4 Code Package/No. of pieces 600 SV0600 1/1 800 SV0800 1/1 SV1000 1/1 1200 SV1200 1/1 1400 SV1400 1/1 Vertical segregation kit 1600 SV1600 1/1 Vertical segregation kit 1800 SV1800 1/1 Vertical segregation kit 2000 SV2000 1/1 Description H Vertical segregation kit Vertical segregation kit Vertical segregation kit 1000 Vertical segregation kit Vertical segregation kit > In-depth technical information page 6/1 D 165 195 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/27 ArTu L modular structures Ordering codes Wall-mounted/floor-mounted switchgear Horizontal shelves Dimensions (mm) W Code Description Package/ No. of pieces 24 DIN mod. Horizontal shelf for wall-mounted structure 3 Horizontal shelf for floor-mounted structure SH0100 SH0100 1/1 SH0200 1/1 SH0208 1/1 600 36 DIN mod. Horizontal shelf for floor-mounted structure 800 SH0200 SH0208 IP0600-IP0800 IP1000-IP1200 IP0601 IP0602 IP1604 IP31 vertical finishing profiles Dimensions (mm) H Code Description Package/ No. of pieces Vertical finishing profile for structure and wall-mounting cable container No. 2 finishing profiles structure/cab.cont. IP0603-IP0801 IP1001-IP1201 IP1400-IP1600 IP1800-IP2000 IP0601 IP0602 IP1604 600 IP0600 1/2 No. 2 finishing profiles structure/cab.cont. 800 IP0800 1/2 No. 2 finishing profiles structure/cab.cont. 1000 IP1000 1/2 No. 2 finishing profiles structure/cab.cont. 1200 IP1200 1/2 No. 1 finishing profiles for side-by-side 600 IP0603 1/1 No. 1 finishing profiles for side-by-side 800 IP0801 1/1 No. 1 finishing profiles for side-by-side 1000 IP1001 1/1 No. 1 finishing profiles for side-by-side 1200 IP1201 1/1 Vertical finishing profile for structure and floor-mounting cable container No. 2 finishing profiles structure/cab.cont. 600 IP1400 1/2 No. 2 finishing profiles structure/cab.cont. 800 IP1600 1/2 No. 2 finishing profiles structure/cab.cont. 1000 IP1800 1/2 No. 2 finishing profiles structure/cab.cont. 1200 IP2000 1/2 No. 1 finishing profiles for side-by-side 600 IP1401 1/1 No. 1 finishing profiles for side-by-side 800 IP1601 1/1 No. 1 finishing profiles for side-by-side 1000 IP1801 1/1 No. 1 finishing profiles for side-by-side 1200 IP2001 1/1 IP1401-IP1601 IP1801-IP2001 IP31 horizontal finishing profiles Dimensions (mm) W Code Description Package/ No. of pieces Horizontal finishing profile for structure wall-mounting/floor-mounting and cable container > Rapid selection table page 3/4 No. 2 horizontal profiles for structure 600 IP0601 1/2 No. 2 horizontal profiles for structure 800 IP0604 1/2 No. 2 horizontal profiles for cable container 300 IP0602 1/2 > In-depth technical information page 6/1 3/28 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Floor-mounted switchgear Connection box Dimensions (mm) RC1000 Description H W D Code Package/ No. of pieces Box for roof for floor-mounted structures 24 DIN mod. Box for roof for structure 400 600 195 RC1000 1/1 195 RC2000 1/1 3 Box for roof for floor-mounted cable container Box for roof for cable container 400 300 RC2000 2 Crosspieces for accessories Can be mounted on the structure to anchor cables or to mount accessories. They can be mounted on the side, on the rear or in the cable container of the structure. 2 Mounting position Code Package/ No. of pieces No. 2 structure rear crosspieces W=600mm 1 TL1000 1/2 No. 2 structure rear crosspieces W=800mm 1 TL1100 1/2 No. 2 cable container and box rear crosspieces W=300mm 2 TL3000 1/2 No. 2 fixing crosspieces W=300mm for scaled busbar holder PB0802 2 TL2000 1/2 No. 2 fixing crosspieces W=200mm for scaled busbar holder PB0802 2 TL2100 1/2 Description 2 1 > Rapid selection table page 3/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/29 ArTu L modular structures Ordering codes AD1009 Kit for apparatus GD1520 GD1530 DIN rail kits for System Pro-M modular apparatus, Tmax T1-T2-T3-XT1-XT3, moulded-case circuitbreakers Kit consisting of double aluminum profile (DIN35) complete with fixing brackets. Dimensions (mm) AP6000 3 AD1096 AD1098 W Code Package/ No. of pieces DIN rail kit (aluminium) - Floor 300 GD1512 1/1 DIN rail kit (aluminium) - Wall 300 GD1515 1/1 600 GD1520 1/1 800 GD1530 1/1 Description Code Package/ No. of pieces for panel H=300mm AD1097 1/1 Description 12 DIN mod. 24 DIN mod. AD1097 DIN rail kit (aluminium) 36 DIN mod. DIN rail kit (aluminium) AD1096 AD1098 Supports for Unifix H OFF OFF OFF Depth adapters AP6000 Enables the depth of miniature circuit-breakers to be adapted to that of moulded-case circuit-breakers mounted on the same DIN rail. Parete Dimensions (mm) 60 80 100 60 80 Description W Code Package/ No. of pieces Depth adapters for Tmax T1-T2-T3-XT1-XT3 600 AP6000 1/1 Description Code Package/ No. of pieces Supports for duct 60 80 100 80 60 AD1096 AD1009 1/4 No. 4 metal supports for horizontal/vertical wallmounted duct AD1096 1/4 60 80 100 No. 4 metal supports for horizontal/vertical floorstanding duct AD1098 1/4 60 80 100 No. 4 plastic supports for horizontal duct Pavimento AD1098 60 80 100 100 80 60 > Rapid selection table page 3/4 > In-depth technical information page 6/1 3/30 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Kit for apparatus Panels for square measuring instruments Steel sheet panels complete with hinges positioned on the right or left. Dimensions (mm) Description H W Package/ No. of pieces Code 3 12 DIN mod. Modular panel 1 DIN row 200 300 PM2612 1/1 24 DIN mod. Modular panel 1 DIN row 150 PM1500 1/1 Modular panel 1 DIN row 200 PM2624 1/1 Modular panel 1 DIN row Tmax RC 300 PM2312 1/1 Modular panel 1 DIN row only for Unifix H 300 PM3624 1/1 Modular panel 2 DIN rows 300 PM3648 1/1 Modular panel 3 DIN rows 600 PM6672 1/1 Modular panel 1 DIN row 150 PM1536 1/1 Modular panel 1 DIN row 200 PM2836 1/1 Modular panel 1 DIN row Tmax RC 300 PM2315 1/1 Modular panel 1 DIN row only for Unifix H 300 PM3836 1/1 Modular panel 2 DIN rows 300 PM3872 1/1 600 36 DIN mod. 800 Width 600/800mm PM1500/PM1536 PM3648/PM3872 = = 149 PM2624/PM2836 74,5 = 150 299 = 199 432/634 596/796 432/634 74,5 596/796 432/634 596/796 Width 600mm Version for Tmax with mod. diff. Version for Unifix H PM2312/PM2315 PM3624/PM3836 99.5 PM6672 99,5 = 299 299 199.5 200 = 599 432/634 432/634 596/796 596/796 200 99,5 432 596 > Rapid selection table page 3/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/31 ArTu L modular structures Ordering codes Kit for apparatus Panels for square measuring instruments Steel sheet panels complete with hinges positioned on the right or left. Dimensions (mm) Code Package/ No. of pieces Panel for 2 instruments 72x72mm PS2720 1/1 Panel for 2 instruments 96x96mm PS2960 1/1 PS4720 1/1 PS4960 1/1 Panel for 2 instruments 72x72mm PS2728 1/1 Panel for 2 instruments 96x96mm PS2968 1/1 PS4728 1/1 PS4968 1/1 Description W L 24 DIN mod. 3 Panel for 4 instruments 72x72mm 200 600 Panel for 4 instruments 96x96mm 36 DIN mod. Panel for 4 instruments 72x72mm 200 Panel for 4 instruments 96x96mm 800 Width 600/800mm PS4720/PS4728/PS4960/PS4968 PS2720/PS2728/PS2960/PS2968 68 92 68 92 68 92 199 68 199 92 596/796 596/796 Accessories for panels EV1135 EV1136 AD1600 AD1800 IM LU C AG AZZ AD1086 AD1088 AD1089 INO AD1101÷AD1104 Description Code Package/ No. of pieces No. 10 holes covers W=2000mm grey RAL 7035 colour AD1086 1/10 No. 3 holes covers 36 Din modules grey RAL 7035 colour AD1088 1/3 No. 3 holes covers 36 Din modules grey RAL 7035 colour AD1089 1/3 No. 10 closing caps for instrument panel 72x72mm EV1135 1/10 No. 5 closing caps for instrument panel 96x96mm EV1136 1/5 No. 20 label-holders 12 DIN mod. AD1390 1/20 No. 20 label-holders 24 DIN mod. AD1600 1/20 No. 20 label-holders 36 DIN mod. AD1800 1/20 No. 288 labels 1 mod. 15x17mm (HxW) AD1101 (1) 1/288 No. 192 labels 2 mod. 15x27mm (HxW) AD1102 (1) 1/192 No. 96 labels 3 mod. 15x50mm (HxW) AD1103 (1) 1/96 No. 96 labels 4 mod. 15x67mm (HxW) AD1104 (1) 1/96 (1) > Rapid selection table page 3/4 Labels can be written with Grafoplast compatible plotter system. > In-depth technical information page 6/1 3/32 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Kit for apparatus Kit for OT160÷400 KO.... Vertical Dimensions (mm) Code Package/ No. of pieces H W Control Kit for vertical OT160/200/250/315/400 300 600 Decentralized KO1260 1/1 Kit for horizontal OT160/200/250/315/400 300 600 Decentralized KO1261 1/1 Kit for vertical OT160/200/250/315/400 300 800 Decentralized KO1280 1/1 Kit for horizontal OT160/200/250/315/400 300 800 Decentralized KO1281 1/1 300 300 Decentralized KO1262 1/1 Description 24 DIN mod. - W=600mm 3 36 DIN mod. - W=800mm KO.... Horizontal External cable container Kit for vertical OT160/200/250/315/400 Standard blind for general apparatus Dimensions (mm) PF.... Description H W Code Package/ No. of pieces 24 DIN mod. Blind back plate 200 PF1002 1/1 Blind back plate 300 PF1003 1/1 Blind back plate 400 PF1004 1/1 Blind back plate 600 PF1006 1/1 Blind back plate 800 PF1008 1/1 Blind back plate box/cable container 300 PC0600 1/1 600 36 DIN mod. Blind back plate 200 PF1102 1/1 Blind back plate 300 PF1103 1/1 Blind back plate 400 PF1104 1/1 Blind back plate 600 PF1106 1/1 Blind back plate 800 PF1108 1/1 800 External cable container Blind back plate box/cable container 300 300 PC0300 1/1 Blind back plate box/cable container 600 300 PC0600 1/1 The panels must be ordered separately. > Rapid selection table page 3/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/33 ArTu L modular structures Ordering codes Kit for apparatus Standard blind, recessed and ventilated panels for general apparatus PC.... Dimensions (mm) Description PR.... 3 H W Code Package/ No. of pieces 24 DIN mod. Blind panel 50 PC1050 1/1 Blind panel 100 PC1600 1/1 Blind panel 150 PC1150 1/1 Blind panel 200 PC2600 1/1 Blind panel 300 PC3600 1/1 Blind panel 400 PC4600 1/1 Blind panel 600 PC6600 1/1 Blind panel 800 PC8600 1/1 Blind panel (Inner door) 1600 PC1660 1/1 Blind panel (Inner door) 1800 PC1860 1/1 Blind panel (Inner door) 2000 PC2060 1/1 Blind recessed panel 200 PR2600 1/1 Blind recessed panel 400 PR4600 1/1 PC1660 PC1860 PC2060 Blind recessed panel 600 PR6600 1/1 Ventilated panel 100 PA1600 1/1 PC1680 PC1880 PC2080 Ventilated panel 200 PA2600 1/1 PR.... 600 36 DIN mod. Blind panel 50 PC0580 1/1 Blind panel 100 PC1800 1/1 Blind panel 150 PC1580 1/1 Blind panel 200 PC2800 1/1 Blind panel 300 PC3800 1/1 Blind panel 400 PC4800 1/1 Blind panel 600 PC6800 1/1 Blind panel 800 PC8800 1/1 Blind panel (Inner door) 1600 PC1680 1/1 Blind panel (Inner door) 1800 PC1880 1/1 Blind panel (Inner door) 2000 PC2080 1/1 Blind recessed panel 200 PR2800 1/1 Blind recessed panel 400 PR4800 1/1 Blind recessed panel 600 PR6800 1/1 Blind panel 100 PC1403 1/1 Blind panel 200 PC2401 1/1 Blind panel 300 PC3401 1/1 Blind panel 400 PC4401 1/1 Blind panel 600 PC6401 1/1 Blind recessed panel 400 PR4401 1/1 Blind panel 800 PC8401 1/1 800 External cable container > Rapid selection table page 3/4 > In-depth technical information page 6/1 3/34 1STC008001D0204 | ABB Technical catalogue 300 > Overall dimensions page 7/1 Kit for apparatus Kit for installing Tmax moulded-case circuit-breakers Horizontal installation (front terminals) Dimensions (mm) Description H W Code Package/ No. of pieces 24 DIN mod. wall-mounted/floor-mounted switchgear Kit T1 3/4 P fixed 200 LK1000 1/1 Kit T1 4 P fixed + RC mod. 200 LK1004 1/1 Kit T2 3/4 P fixed 200 LK2000 1/1 Kit T2 4 P fixed + RC mod. 200 LK2004 1/1 Kit T3 3/4 P fixed 200 LK3000 1/1 Kit T3 4 P fixed + RC mod. 300 LK3004 1/1 Kit XT1 3/4 P fixed 200 LX1000(1) 1/1 Kit XT1 4 P fixed + RC mod. 200 LX1005 1/1 Kit XT2 3/4 P fixed 200 LX2000(1) 1/1 Kit XT2 4 P fixed + RC mod. 200 LX2004 1/1 Kit XT3 3/4 P fixed 200 LX3000(1) 1/1 Kit XT3 4 P fixed + RC mod. 300 LX3004 1/1 600 Kit XT4 3/4 P fixed 200 LX4003 1/1 Kit XT4 4 Pfixed + RC mod. 200 LX4004 1/1 Kit T4 3/4 P fixed 200 LK4003(1) 1/1 Kit T4 4 P fixed + RC mod. 200 LK4004 1/1 Kit T5 3/4 P fixed 300 LK5003 1/1 Kit T5 4 P fixed + RC mod. 300 LK5004 1/1 LK3301 1/1 3 24 DIN mod. floor-mounted switchgear Kit T3 3/4 P with divider 200 600 36 DIN mod. floor-mounted switchgear Kit T1 3/4 P fixed 200 LK1100(1) 1/1 Kit T1 4 P fixed + RC mod. 200 LK1104 1/1 Kit T2 3/4 P fixed 200 LK2100 1/1 Kit T2 4 P fixed + RC mod. 200 LK2104 1/1 Kit T3 3/4 P fixed 200 LK3110(1) 1/1 Kit T3 4 P fixed + RC mod. 300 LK3104 1/1 Kit T4 3/4 P fixed 200 LK4103 1/1 Kit T4 4 P fixed + RC mod. 200 LK4104 1/1 Kit T5 3/4 P fixed 300 LK5103 1/1 Kit T5 4 P fixed + RC mod. 300 LK5104 1/1 Kit XT1 3/4 P fixed 200 LX1100 1/1 Kit XT1 4 P fixed + RC mod. 200 LX1104 1/1 Kit XT3 3/4 P fixed 200 LX3110 1/1 Kit XT3 4 P fixed + RC mod. 300 LX3104 1/1 (1) > Rapid selection table page 3/4 800 For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for platemounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for platemounting, AD3308 XT4 3P Flange for plate-mounting. > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/35 ArTu L modular structures Ordering codes Kit for apparatus Kit for installing Tmax moulded-case circuit-breakers Vertical installation (front terminals) Dimensions (mm) Description H W Code Package/ No. of pieces 24 DIN mod. wall-mounted/floor-mounted switchgear 3 Kit DIN T1-T2-T3-XT1-XT3, 3/4 P 150÷600 Kit No. 4 T1 3/4 P fixed + RC mod. 200 Kit T2 3/4 P fixed GD…(1) 1/1 LK1001 1/1 200 LK2001 1/1 Kit No. 3 T2 3/4 P fixed + RC mod. 200 LK3200 1/1 Kit T3 3/4 P fixed LK3001(4) 1/1 300 Kit T3 4 P fixed + RC mod. 300 LK3005 1/1 Kit No. 3 T3 3/4 P side by side 300 LK3300(4) 1/1 Kit No. 4 T1 3/4 P side by side 200 LK4100(4) 1/1 Kit T4 3/4 P fixed + RC mod. 400 LK4005 1/1 Kit T4 4 P fixed + RC mod. 500 LK4006 1/1 Kit T5 3/4 poli fixed 400 Kit T5 4 P fixed + RC mod. 500 Kit XT1 3/4 P fixed 200 LX1001(4) 1/1 Kit XT1 4 P fixed + RC mod. 300 LX1006 1/1 600 LK5005 1/1 LK5006 1/1 Kit XT1 N 3 CBs side by side 200 LX4100 1/1 Kit XT2 3/4 P fixed 200 LX2001 1/1 Kit XT2 N 3/4(3) CBs side by side 200 LX3200(2) 1/1 Kit XT3 3/4 P fixed 300 LX3001 1/1 Tmax XT3 4 P P fixed + RC mod. 300 LX3005 1/1 Kit XT3 N 2 CBs side by side 300 LX3300 1/1 Kit XT4 3/4 P fixed 300 LX4005(4) 1/1 Kit XT4 4 P fixed + RC mod. 400 LX4006 1/1 Kit XT4 N 3/4(3) CBs side by side 300 LX4008(2) 1/1 LK6011 1/1 24 DIN mod. floor-mounted switchgear Kit T6 3/4 P fixed > Rapid selection table page 3/4 500 600 (1) For the selection of kit for installation on DIN rail see page 3/30. (2) Order polished flange AD3310, AD3311, AD3312, AD3313 see page 3/11. CONTINUED (3) No. 4 CBs side by side 3P, No. 3 CBs side by side 4P. (4) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for platemounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for platemounting, AD3308 XT4 3P Flange for plate-mounting. > In-depth technical information page 6/1 3/36 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Kit for apparatus Kit for installing Tmax moulded-case circuit-breakers Vertical installation (front terminals) Dimensions (mm) Description H W Code Package/ No. of pieces GD…(1) 1/1 36 DIN mod. floor-mounted switchgear Kit DIN T1-T2-T3-XT1-XT3, 3/4 P 150÷600 Kit T1 3/4 P fixed 200 Kit No. 5 T1 3/4 P fixed + RC mod. 200 LK1101(4) 1/1 LK4108 1/1 Kit T2 3/4 P fixed 200 LK2101 1/1 Kit No. 4 T2 3/4 P side by side 200 LK3111 1/1 Kit T3 3/4 P fixed 300 LK3101(4) 1/1 Kit T3 4 P fixed + RC mod 300 LK3105 1/1 Kit No. 4 T3 3/4 P side by side 300 LK3102 1/1 Kit T4 3/4 P fixed 400 LK4105 1/1 Kit T4 4 P fixed + RC mod 500 LK4106 1/1 Kit T5 3/4 P fixed 400 LK5105 1/1 Kit T5 4 P fixed + RC mod 500 LK5106 1/1 Kit T6 3/4 P fixed 500 LK6012 1/1 Kit XT1 3/4 P fixed 200 LX1101 1/1 Kit XT1 4 P fixed + RC mod 300 LX1108 1/1 Kit XT2 3/4 P fixed 200 LX2101 1/1 Kit XT3 3/4 P fixed 300 LX3101 1/1 Kit XT3 4 P fixed + RC mod 300 LX3105 1/1 800 3 Wall-mounted external cable container Kit T3 3/4 P fixed 300 Kit XT2 3/4 P fixed 300 Kit XT3 3/4 P fixed 300 300 LK3003 1/1 LX2300 1/1 LX3003 1/1 Floor-mounted external cable container > Rapid selection table page 3/4 Kit T1 3/4 P fixed 200 LK1002 1/1 Kit T1 4 P fixed + RC mod 300 LK1008 1/1 Kit T2 3/4 P fixed 200 LK2002 1/1 Kit T2 4 P fixed + RC mod 300 LK2008 1/1 Kit T3 3/4 P fixed 300 LK3002 1/1 Kit T3 4 P fixed + RC mod 300 LK3008 1/1 Kit T4 3/4 P fixed 400 LK4007 1/1 Kit T5 3/4 P fixed 400 LK5007 1/1 Kit T5 4 P fixed + RC mod 500 LK5008 1/1 Kit XT1 3/4 P fixed 200 LX1002(4) 1/1 Kit XT1 4 P fixed + RC mod 300 LX1008 1/1 300 Kit XT2 3/4 P fixed 300 LX2002 1/1 Kit XT2 4 P fixed + RC mod 300 LX2008 1/1 Kit XT3 3/4 P fixed 300 LX3002(4) 1/1 Kit XT3 4 P fixed + RC mod 300 LX3008 1/1 Kit XT4 3/4 P fixed 300 LX4007(4) 1/1 ((1) For the selection of kit for installation on DIN rail see page 3/30. (2) Order polished flange AD3310, AD3311, AD3312, AD3313 see page 3/11. (3) No. 4 CBs side by side 3P, No. 3 CBs side by side 4P. (4) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for platemounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for platemounting, AD3308 XT4 3P Flange for plate-mounting. > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/37 ArTu L modular structures Ordering codes BA0400 Distribution system Distribution busbars with shaped section BA0800 Dimensions (mm) Description L Code Package/ No. of pieces Busbar In=400A 1730 BA0400 1/1 Busbar In=800A 1730 BA0800 1/1 3 PB0802 Busbar holders for busbars with shaped section Description Code Package/ No. of pieces PB0802 1/1 PB0803 1/1 Scaled PB0803 Scaled busbar holder In=800A - 35kA Linear Linear busbar holder In=800A - 35kA Joints for busbars with shaped section AD1068 Description Code Package/ No. of pieces No. 4 copper 400A branch joints AD1077 1/4 No. 4 joints for joining busbars with shaped section 400/800A AD1068 1/4 AD1077 20 Hammer seal screws for busbars with shaped section AD1056 27 > Rapid selection table page 3/4 AD1064 Description Code Package/ No. of pieces No. 12 M8 screws L=20mm for cable terminal complete with screw-covering cap AD1056 1/12 No. 12 M8 screws L=27mm for flat busbars up to 10mm, complete with screw-covering cap AD1064 1/12 > In-depth technical information page 6/1 3/38 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Distribution system AD1065 Resting bases for busbars with shaped section Description Code Package/ No. of pieces No. 4 resting bases for 400/800A busbars AD1065 1/4 3 Crosspieces for 400/800A busbars with shaped section Mounting Pic. Pic.1 Description TL1000 TL1100 Package/ No. of pieces Code Vertical busbars at back of structure and connection to the Unifix H system No. 2 Fixing crosspieces W=600mm for linear busbar holder PB0803 1 TL1000 1/2 No. 2 Fixing crosspieces W=800mm for linear busbar holder PB0803 1 TL1100 1/2 Vertical busbars at back of the external cable container or horizontal in the cable connection box No. 2 Fixing crosspieces W=300mm for linear busbar holder PB0803 2 TL3000 1/2 No. 2 Fixing crosspieces W=300mm for scaled busbar holder PB0802 2 TL2000 1/2 Vertical busbars at the back of the cable container internal Pic.2 No. 2 Fixing crosspieces W=200mm for scaled busbar holder PB0802 3 TL2100 1/2 TL2000 TL3000 Pic.3 TL2100 > Rapid selection table page 3/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/39 ArTu L modular structures Ordering codes BR0250 Distribution system BR0400 Flat busbar Copper with 1750mm drilled length. Can be used with both linear BP0630 and scaled BP0634 busbar holder. BR0630 Description Dimensions (mm) L In (A) 250 BR0250 1/2 1750 400 BR0400 1/2 630 BR0630 1/2 No. 2 copper busbar 15x5 3 No. 2 copper busbar 25x5 No. 2 copper busbar 30x10 BP0630 BP0632 BP0634 Code Package/ No. of pieces Busbars holders Busbar holders made of insulating self-extinguishing material, certified in conformity with the EN 60439-1 Standard for Icc≤35kA. Description Code Package/ No. of pieces No. 2 linear busbar holders In=630A - 32kA BP0630 1/1 No. 2 terminal covers for linear busbar holders BP0630 BP0632 1/1 No. 2 scaled busbar holder In=630A - 23kA BP0634 1/1 Code Package/ No. of pieces Crosspieces for flat busbars Fig. 1 Mounting Pic. Description TL1000 TL1100 Busbar vertically on back of structure or of cable container No. 2 crosspieces back of structure W=600mm with BP0630 1 TL1000 1/2 No. 2 crosspieces back of structure W=800mm with BP0630 1 TL1100 1/2 Busbars vertically on back of external cable container or horizontally in cable connection box No. 2 crosspieces back of cable container W=300mm with BP0630 or scaled BP0634 2 TL3000 BP0632 Fig. 2 TL3000 > Rapid selection table page 3/4 > In-depth technical information page 6/1 3/40 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 1/2 Distribution system Flexible busbars Flexible busbars insulated with self-extinguishing material. Dimensions In (mm) L (A) Description Package/ No. of pieces Code No. 2 flexible busbars, section 20x3 250 BF1602 1/2 No. 2 flexible busbars, section 20x5 400 BF2502 1/2 500 BF4002 1/2 630 BF4012 (1) 1/2 No. 2 flexible busbars, section 24x6 2000 No. 2 flexible busbars, section 32x5 (1) Only for circuit-breakers with front extended terminals or rear terminals EV1119 Earthing busbars EV1120 Copper busbars drilled and threaded for rapid connection of the conductors. EV1121 3 Description Dimensions (mm) L No. 2 earthing busbars 20x5 threaded M6 No. 2 earthing busbars 25x5 threaded M6 2000 No. 2 earthing busbars 50x5 threaded M6 Code Package/ No. of pieces EV1119 1/2 EV1120 1/2 EV1121 1/2 Insulators and copper busbars for neutral/earthing > Rapid selection table page 3/4 Description Code Package/ No. of pieces No. 50 hexagonal insulators 30x30mm EV1122 1/50 No. 50 hexagonal insulators 30x30mm EV1123 1/50 No. 25 hexagonal insulators 36x50mm EV1124 1/25 No. 25 hexagonal insulators 36x50mm EV1125 1/25 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/41 ArTu L modular structures Ordering codes Type A Type B Distribution system Prefabricated kit for connection between apparatus and busbars with shaped section 400/800A Mounting Position Tmax/busbar Type Position Code Package/ No. of pieces Wall-mounted/floor-mounted switchgear - Horizontal circuit-breaker 3 T1 -T2 in the struc. and busbars in the B cable cont. Mounting 1 Mounting 2 1 KB1001 (1) 1/1 Floor-mounted switchgear - Horizontal circuit-breaker T3 in the structure and busbars in the cable cont. B 1 KB1002 1/1 T5 in the structure and busbars in the cable cont. B 1 KB1020 1/1 T5 in the structure and busbars in the cable cont. B 1 KB1021 1/1 Wall-mounted/floor-mounted switchgear - Vertical circuit-breaker Mounting 3 Mounting 4 T3 in the structure and busbars in the cable container B 1 KB1006 1/1 T3 in the cable container and busbars in the structure B 1 KB1010 1/1 Resid. current T3 in the cable cont. and busb. in the structure B 2 KB1019 1/1 T3 in the structure/cable container and busbars at back B 2 KB1014 (2) 1/1 T3 in the structure/cable container busbars at back B 2 KB1018 (2) 1/1 Floor-mounted switchgear - Vertical circuit-breaker > Rapid selection table page 3/4 T5 and T5 resid.cur. in the struc. and busb. in the cable cont. A 3-4 KB1022 1/1 Resid. current T5 and T5 in the cab. cont. and bus. in the structure A 3-4 KB1024 1/1 (1) For Tmax T1 fit the circuit-breaker with extended terminals. (2) Only with flat busbars and scaled busbar holder. > In-depth technical information page 6/1 3/42 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Distribution system 600 800 Unifix H Dimensions (mm) W Code AD1097 ED2183 ED2191 Description Package/ No. of pieces Frames for Tmax Frame with 24 DIN module busbar 600 ED2183 1/1 Frame with 36 DIN module busbar 800 ED2191 1/1 No. 2 fixing brackets onto the structure for ED2183 or ED2091 AD1097 1/2 ED2209 1/1 ED2894 1/1 Basic module for DIN L1-L2 top 16A ED2902 1/1 Basic module for DIN L1-N bottom 16A ED2910 1/1 Basic module for DIN L1-L2 bottom 16A ED2928 1/1 Basic module L1/Neutral top 40A ED2654 1/1 Basic module L2/Neutral top 40A ED2662 1/1 ED2654 ED2662 ED2670 Basic module L3/Neutral top 40A ED2670 1/1 ED0004 Basic module L1 top 63A ED2531 1/1 ED2531-ED2549 ED2564-ED2556 Basic module L2 top 63A ED2549 1/1 Basic module L3 top 63A ED2556 1/1 Basic module Neutral top 63A ED2564 1/1 Basic module L1 bottom 63A ED2572 1/1 Basic module L2 bottom 63A ED2590 1/1 Basic module L3 bottom 63A ED2598 1/1 Basic module Neutral bottom 63A ED2606 1/1 Basic module with cable L1 top 100A ED2720 1/1 Basic module with cable L2 top 100A ED2738 1/1 Basic module with cable L3 top 100A ED2746 1/1 Basic module with cable Neutral top 100A ED2753 1/1 Basic module L1 top ≤40A ED2557 1/1 Basic module L2 top ≤40A ED2558 1/1 Basic module L3 top ≤40A ED2559 1/1 Basic module Neutral top ≤40A ED2560 1/1 Basic module L1 top 125A ED2551 1/1 Basic module L2 top 125A ED2552 1/1 ED2209 3 Feeder modules 4P 400A feeder module (for ED2183-ED2191) Basic modules In 16A Basic module for DIN L1-N top 16A ED2894 ED2902 ED2910 ED2928 ED2720-ED2738 ED2746-ED2753 ED2551-ED2552 ED2553-ED2554 Basic modules In 40A Basic modules In 63A Basic modules In 100A Basic modules ≤ In 40A S800 ED2845 ED2550 Basic modules ≤ In 125A S800 ED2572-ED2590 ED2598-ED2506 > Rapid selection table page 3/4 Basic module L3 top 125A ED2553 1/1 Basic module Neutral bottom 125A ED2554 1/1 Basic module false pole W=27mm ED2550 1/1 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/43 ArTu L modular structures Ordering codes Distribution system ED2217-ED2225 ED2233-ED2241 ED2258-ED2266 ED2274-ED2282 ED2332-ED2340 ED2357-ED2365 Unifix H Code Package/ No. of pieces Basic module L1 top L2 bottom ED2217 1/1 Basic module L2 top L1 bottom ED2225 1/1 Basic module L3 top Neutral bottom ED2233 1/1 Basic module Neutral top L3 bottom ED2241 1/1 Basic module false pole for residual current release RC221 ED2373 1/1 Basic module false pole for solenoid operator ED2381 1/1 Basic module L1 top L2 bottom ED2258 1/1 Basic module L2 top L1 bottom ED2266 1/1 Basic module L3 top N bottom ED2274 1/1 Basic module N top L3 bottom ED2282 1/1 Basic module false pole for residual current release RC221 ED2373 1/1 Basic module false pole for solenoid operator ED2399 1/1 Basic module L1 top ED2290 1/1 Basic module L2 top ED2308 1/1 Basic module L3 top ED2316 1/1 Basic module N top ED2324 1/1 Basic module L1 bottom ED2332 1/1 Basic module L2 bottom ED2340 1/1 Basic module L3 bottom ED2357 1/1 Basic module N bottom ED2365 1/1 Basic module false pole for residual current release RC221 ED2373 1/1 Description Basic modules ≤ In 160A Tmax T1, Tmax XT1 3 ED0001 ED0002 ED0003 ED2290-ED2308 ED2316-ED2324 Basic modules ≤ In 160A Tmax T2 Basic modules ≤ In 250A Tmax T3, Tmax XT3 ED2373 ED2381 ED2399 ED2407 PM3624 PM3836 ED2936 Accessories Basic module false pole for DDA ED2845 1/1 Basic module false pole for modular MDRC ED2852 1/1 No. 2 IP20 covers (for ED2183-ED2191) W=173mm (10 DIN modules) ED2407 1/2 No. 6 duct supports 40x60mm (only for modular apparatus) ED2936 1/6 Modular front panel 300x600mm (HxL) PM3624 1/1 Modular front panel 300x800mm (HxL) PM3836 1/1 No. 10 terminal covers for T1 ED0001 1/10 No. 10 terminal covers for T2 ED0002 1/10 No. 10 terminal covers for T3 ED0003 1/10 No. 10 terminal covers for S200/F200 ED0004 1/10 Spare parts > Rapid selection table page 3/4 > In-depth technical information page 6/1 3/44 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Distribution system 600 800 Unifix L ED2961 ED2962 Dimensions W (mm) Code Package/ No. of pieces 100A 2P 8 module busbar 200 ED2985 1/6 100A 2P 12 module busbar 400 ED2993 1/6 100A 2P 18 module busbar 450 ED3009 1/6 100A 2P 24 module busbar 600 ED3017 1/6 100A 2P 36 module busbar 800 ED3025 1/6 100A 4P 12 module busbar 400 ED2944 1/6 100A 4P 18 module busbar 450 ED2951 1/6 100A 4P 24 module busbar 600 ED2969 1/6 100A 4P 36 module busbar 800 ED2977 1/6 Connection with 2 conductors L/N 16A ED3108 1/6 Connection with 3 conductors L1/L2/L3 16A ED3116 1/6 Connection with 4 conductors L1/L2/L3/N 16A single phase ED3124 1/6 Connection with 2 conductors L1/N 40A ED3355 1/6 Connection with 3 conductors L1/L2/L3 40A ED3363 1/6 Connection with 4 conductors L1/L2/L3/N 40A ED3371 1/6 No. 10 connections L1-N 40 A ED3272 1/10 No. 10 connections L2-N 40 A ED3280 1/10 No. 10 connections L3-N 40 A ED3298 1/10 No. 10 connections L 1 100A ED3033 1/10 No. 10 connections L 2 100A ED3041 1/10 No. 10 connections L 3 100A ED3058 1/10 No. 10 connections N 100A ED3066 1/10 Feeder with 4P 100A cable (W=350mm) ED3132 1/10 Feeder with 4P 100A cable (W=1500mm) ED0026 1/10 Feeder with 4P 100A cable (W=1500mm) ED0025 1/10 Parallel module 2P 100A with cable (W=600mm) ED3082 1/6 Parallel module 4P 100A with cable (W=400mm) ED3405 1/6 Parallel module 4P 100A with cable (W=600mm) ED3090 1/6 Parallel module 4P 100A with cable (W=800mm) ED3413 1/6 Parallel module 4P 100A with cable (W=1500mm) ED3439 1/6 No. 10 single-pole power supply terminals L1 ED3101 1/10 No. 10 single-pole power supply terminals L2 ED3102 1/10 No. 10 single-pole power supply terminals L3 ED3103 1/10 No. 10 single-pole power supply terminals N ED3104 1/10 N°10 busbar covers (W=600mm) ED2961 1/10 N°2 busbar covers (W=800mm) ED2962 1/2 DIN rail Kit and supports (W=600mm) GD1520 1/1 DIN rail Kit and supports (W=800mm) GD1530 1/1 Modular front panel 200x600mm (HxW) PM2624 1/1 Modular front panel 200x800mm (HxW) PM2836 1/1 Description 2-pole busbars ED…. GD1520 GD1530 PM2624 PM2836 3 4-pole busbars 2 poles 4 poles N L1 L2 L3 N L1 Connections for various apparatus ED3066 ED3033 ED3041 ED3058 Connections for apparatus ED3104 ED3101 ED3102 ED3103 Power supply modules with cable Power supply modules without cable In 100A 400 350 600 1500 800 2500 1500 Accessories ED3090 ED3405 ED3413 ED3439 ED3132 ED0026 ED0025 > Rapid selection table page 3/4 ED3124 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/45 ArTu L modular structures Ordering codes Accessories AL2000 Brackets for wall fixing AA1000 Description Code Package/ No. of pieces No. 2 brackets for wall fixing AL2000 1/2 Bracket for wall fixing of 2 side-by-side structures AA1000 1/1 Description Code Package/ No. of pieces No. 4 M8 steel eyebolts AL1000 1/4 No. 2 lifting reinforcements for side-by-side structures W=300/600mm AL1001 1/2 No. 2 lifting/coupling reinforcements TU8000 1/2 Code Package/ No. of pieces For the wall-mounted version, order 2 x AL2000. 3 AL1000 AL1001 Eyebolts and lifting reinforcements Rinforzato TU8000 Supports for terminal boxes AD1099 Description Structure AD1099 No. 2 supports for horizontal 45° angled terminal box AA1001 1/2 Cable container AA1001 EV1110 EV2110 EV1112 EV2112 EV1113 EV1119 > Rapid selection table page 3/4 No. 2 supports for vertical terminal box in external cable container or horizontal in the cable connection box AD1099 1/2 No. 2 supports for vertical terminal box in internal cable container AD1005 1/2 Angled supports for terminal boxes and earthing busbars Description Code Package/ No. of pieces No. 50 angled supports 1 row of terminals EV1110 1/50 No. 10 angled supports 1 row of terminals EV2110 1/10 No. 50 angled supports 1 row of terminals + earth EV1112 1/50 No. 10 angled supports 1 row of terminals + earth EV2112 1/10 No. 2 angled supports 1 row of terminals + earth EV1113 1/2 > In-depth technical information page 6/1 3/46 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Accessories Diagram holder pocket The diagram holder pocket (made of RAL 2004 colour plastic, dim. HxL 237x265mm type A4) is applied to the inside of doors/blind panels of suitable size using the adhesive provided. TS4013 TS4011 TS4012 TS4000 TS4001 TS4002 TS4003 Description Code Package/ No. of pieces Plastic diagram pocket AA5600 1/1 3 Sections for accessories Description Dimensions (mm) L Code Package/ No. of pieces No. 2 sections EN50024 C30 2000 TS4011 1/2 No. 2 sections EN50035 G32 2000 TS4012 1/2 No. 2 DIN sections EN50022 2000 TS4013 1/2 No. 2 cable rails 600 TS4000 1/2 No. 2 cable rails 800 TS4001 1/2 No. 2 cable rails 1000 TS4002 1/2 No. 2 cable rails 1200 TS4003 1/2 Code Package/ No. of pieces Modular 125A AD1076 (1) 1/1 Modular 125A AD1080 (2) 1/1 Modular 175A AD1007 (1) 1/1 Modular 175A AD1081 (2) 1/1 Modular 250A AD1030 1/1 Modular 125A AD1031 1/1 Modular 160A AD1027 1/1 Modular 125A AD1075 1/1 Modular 175A AD1006 1/1 Modular 125A AD1004 1/1 Modular 125A-medium-93x89x48 (HxLxP) AD1028 1/1 Modular 125A-large-96x126x48 (HxLxP) AD1029 1/1 Modular 160A AD1027 1/1 Horizontal 250A for structures W=600mm AD1034 1/1 Horizontal 250A for structures W=800mm AD1053 1/1 Description Code Package/ No. of pieces Supports for fixing to the structure for AD1034 and AD1053 AD1038 1/1 Connection accessory between two AD1080 AD1083 1/1 Dividers Description Single-pole AD1080 AD1075 AD1006 AD1081 AD1030 AD1031 AD1004 Three-pole Four-pole AD1028 AD1029 AD1027 AD1038 (1) AD1034 AD1053 10 outputs - (2) 6 outputs Amounting accessories > Rapid selection table page 3/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/47 ArTu L modular structures Ordering codes Accessories Marking N Description 3 3 400 VOLT Code No. 490 adhesive labels ø12mm symbol N EV1150 1/490 No. 490 adhesive labels ø12mm symbol L1 EV1151 1/490 No. 490 adhesive labels ø12mm symbol L2 EV1152 1/490 No. 490 adhesive labels ø12mm symbol L3 EV1153 1/490 No. 490 adhesive labels ø12mm symbol T EV1154 1/490 No. 10 triangular adhesive labels 125mm with 400V lightning arrow symbol EV1155 1/10 No. 300 triangular adhesive labels 50mm with lightning EV1156 arrow symbol EV1090 EV1091 EV1092 EV1093 EV1050 EV1051 EV1056 EV1058 EV1050 > Rapid selection table page 3/4 Package/ No. of pieces 1/300 Brackets for anchoring cables Adjustable cable blocking bracket can be mounted on sections with 10mm slot EV1050. Description Code No. 10 cable blocking brackets min÷max ø 9÷16mm Package/ No. of pieces EV1090 1/10 No. 10 cable blocking brackets min÷max ø 16÷30mm EV1091 1/10 No. 5 cable blocking brackets min÷max ø 30÷48mm EV1092 1/5 No. 5 cable blocking brackets min÷max ø 48÷72mm EV1093 1/5 Aluminium sliding guides for universal uses Description Code Package/ No. of pieces No. 10 aluminium supporting sections 30x15 W=2000mm EV1050 1/10 No. 25 fixing brackets for EV1050 EV1051 1/25 No. 100 aluminium M6 nuts for EV1050 EV1056 1/100 No. 100 aluminium M8 nuts for EV1050 EV1058 1/100 > In-depth technical information page 6/1 3/48 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Accessories Insert and keys AA1560 AA6120 AA6200 Description Code Package/ No. of pieces Wall-mounted structures and cable container EV1008 AA6140 Box for closing doors with double-tab insert EV1008 1/1 ArTu W wall-mounted insert + Yale type key EV1036 1/1 Ronis 455 Insert + key for EV1008 EV1037 1/1 3mm double-tab insert + key for EV1008 EV1039 1/1 3 Floor-mounted structures AA1570 AA6160 AA1560 Double-tab insert AA6100 1/1 Double-tab Zn+Al+Mg alloy key AD1058 1/1 Yale insert + key AA6200 1/1 Male 6.4 triangular insert on ø 7.6 AA6120 1/1 Triangular key AA1560 1/1 Male 7square type insert; key not available AA6140 1/1 Hexagonal 8 type insert embedded; key not available AA6180 1/1 FIST type insert (FIAT) AA6160 1/1 Fiat key AA1570 1/1 Ronis E739 insert + key AA8004 1/1 Description Code Package/ No. of pieces No. 10 hinges + screws for panels (spare part ACP468) AD1090 1/10 No. 10 plug + door key kits (spare part APT002) AD1091 1/10 ArTu handle complete with lock and cover AD1022 1/1 No. 10 Artu handle covers AD1070 1/10 No. 50 three-lobed M6 spare screws AD1033 1/50 No. 20 cage nuts AD1036 1/20 Spray paint for touching up RAL 7035 colour (400 ml can) VB7035 1/1 Polished flange for XT1 3P mounted on DIN rail AD3301 1/1 Polished flange for XT1 4P mounted on DIN rail AD3302 1/1 Polished flange for XT3 3P mounted on DIN rail AD3303 1/1 Polished flange for XT3 4P mounted on DIN rail AD3304 1/1 Ricambi > Rapid selection table page 3/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/49 ArTu L modular structures Examples of configurations ArTu T T T T T T T T T Terminal boxes 3 ArTu L dim.800x600x165 (850x690x204) mm (external hxwxd) IP43 with modular panels Code Description SL0800 Back structure 800x700x200mm (hxwxd) 1 MC0800 Blind riser h=800mm 1 PV0800 Glass door for structure h=800mm 1 AL2000 No.2 wall fixing brackets L 2 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 PC2600 Plain panel 200x600mm (hxw) M, K 1 GD1520 DIN rail, pitch 150/200mm 3 > Rapid selection table page 3/4 Q.ty > In-depth technical information page 6/1 3/50 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T ArTu Terminal boxes 3 ArTu L dim.1000x900x165 (1050x1080x204) mm (external hxwxd) IP43 with cable container, plate for Tmax T3XT3, modular panels Icw 16kA complete with busbar holder, 250A busbars and Unifix L Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit SL1000 Back structure 1000x700x200mm (hxwxd) 1 SL1000 Back structure 1000x700x200mm (hxwxd) MC1000 Blind riser h=1000mm 1 MC1000 Blind riser h=1000mm 1 1 PV1000 Glass door for structure h=1000mm 1 PV1000 Glass door for structure h=1000mm 1 PC2600 Plain panel 200x600mm (hxw) M, K 1 PC2600 Plain panel 200x600mm (hxw) M, K 1 PM2624 Panel 24 mod.200x600mm (hxw) M, K 3 PM2624 Panel 24 mod.200x600mm (hxw) M, K 3 PS4720 Panel 4 strum.72x72 200x600mm (hxw) M, K 1 PS4720 Panel 4 strum.72x72 200x600mm (hxw) M, K 1 MI1000 Riser CB side-by-side structures h=1000mm 1 MI1000 Riser CB side-by-side structures h=1000mm 1 VC1000 Cable container h=1000mm 1 VC1000 Cable container h=1000mm 1 PC1002 Blind door for cable container h=1000mm 1 PC1002 Blind door for cable container h=1000mm 1 LK3003 Kit wallT3 vert. in cable cont. 1 LX3003 Kit XT3 3/4 P vert. in cable cont. L wall 1 PC6401 Plain panel h=600mm 1 PC6401 Plain panel h=600mm 1 PC1403 Plain panel h=100mm 1 PC1403 Plain panel h=100mm 1 TL3000 Linear crosspiece for cable container 3 TL3000 Linear crosspiece for cable container 3 BP0630 No. 2 flat busbar holders 250-630A 2 BP0630 No.2 flat busbar holders 250-630A 2 BR0250 No. 2 flat busbars 250A 1 BR0250 No.2 flat busbars 250A 1 AL2000 No. 2 wall fixing brackets L 2 AL2000 No.2 wall fixing brackets L 2 AA1000 No. 2 fixing brackets wall side-by-side structures 1 AA1000 No.2 fixing brackets wall side-by-side structures 1 ED2969 4P busbar 24 modules 3 ED2969 4P busbar 24 modules 3 ED3132 Feeder+cable l=350mm 4P 100A 3 ED3132 Feeder+cable l=350mm 4P 100A 3 ED....(*) Connection L 1-L2-L3-N GD1520 DIN rail, pitch 150/200mm AD1096 GD1520 (*) ED....(*) Connection L 1-L2-L3-N 3 GD1520 DIN rail, pitch 150/200mm 3 No. 4 horz./vert. wall wirimg duct metal support 1 AD1096 No. 4 horz./vert. wall wirimg duct metal support 1 Din rail, pitch 150/200mm 3 GD1520 Din rail, pitch 150/200mm 3 For selection of the connection according to the circuit-breaker, see page 3/19. > Rapid selection table page 3/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/51 ArTu L modular structures Examples of configurations ArTu ArTu ArTu T T T T T T T T T T T T T T T T T T Terminal boxes Terminal boxes 3 ArTu L Series dim.1000x1500x165 (1050x1770x204) mm (external hxwxd) IP43 with cable container, plate for Tmax T3-XT3, modular panels Icw 16kA complete with busbar holder, 250A busbars and Unifix L Code Description Q.ty Code SL1000 Back structure 1000x700x200mm (hxwxd) 2 SL1000 Back structure 1000x700x200mm (hxwxd) MC1000 Blind riser h=1000mm 1 MC1000 Blind riser h=1000mm 1 PV1000 Glass door for structure h=1000mm 2 PV1000 Glass door for structure h=1000mm 2 PC2600 Plain panel 200x600mm (hxw) M, K 2 PC2600 Plain panel 200x600mm (hxw) M, K 2 PM2624 Panel 24 mod.200x600mm (hxw) M, K 6 PM2624 Panel 24 mod.200x600mm (hxw) M, K 6 PS4720 Panel 4 strum.72x72 200x600mm (hxw) M, K 2 PS4720 Panel 4 strum.72x72 200x600mm (hxw) M, K 2 MI1000 Riser CB side-by-side structures h=1000mm 2 MI1000 Riser CB side-by-side structures h=1000mm 2 VC1000 Cable container h=1000mm 1 VC1000 Cable container h=1000mm 1 PC1002 Blind door for cable container h=1000mm 1 PC1002 Blind door for cable container h=1000mm 1 LK3003 Kit wall T3 vert. in cable cont. 1 LX3003 Kit XT3 3/4 P vert. in cable cont. L wall 1 PC6401 Plain panel h=600mm 1 PC6401 Plain panel h=600mm 1 PC1403 Plain panel h=100mm 1 PC1403 Plain panel h=100mm 1 AL2000 No. 2 wall fixing brackets L 2 AL2000 No.2 wall fixing brackets L 2 AA1000 No. 2 fixing brackets wall side-by-side structures 2 AA1000 No.2 fixing brackets wall side-by-side structures 2 GD1520 DIN rail, pitch 150/200mm 6 GD1520 DIN rail, pitch 150/200mm 6 ED2969 4P busbar 24 modules 6 ED2969 4P busbar 24 modules 6 ED3132 Feeder+cable l=350mm 4P 100A 6 6 ED....(*) Connection L 1-L2-L3-N Tmax T kit Description Q.ty Tmax XT kit ED3132 Feeder+cable l=350mm 4P 100A ED....(*) Connection L 1-L2-L3-N 2 TL3000 Linear crosspiece for cable container 3 TL3000 Linear crosspiece for cable container 3 BP0630 No. 2 flat busbar holders 250-630A 2 BP0630 No.2 flat busbar holders 250-630A 2 BR0250 No. 2 flat busbars 250A 1 BR0250 No.2 flat busbars 250A 1 AD1096 No. 4 horz./vert. wall wirimg duct metal support 2 AD1096 No.4 horz./vert. wall wirimg duct metal support 2 (*) For selection of the connection according to the circuit-breaker, see page 3/19. > Rapid selection table page 3/4 > In-depth technical information page 6/1 3/52 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T 3 Terminal boxes Terminal boxes ArTu L Series dim.1600x600x195 (1750x690x240) mm (external hxwxd) IP43 with plate for No. 3 Tmax T3-XT3, modular panels, 250A divider and Unifix L Code Description Q.ty Code SL1600 Back structure 1600x700x240mm (hxwxd) 1 SL1600 Back structure 1600x700x240mm (hxwxd) 1 ZL1000 Base strips for structure 1 ZL1000 Base strips for structure 1 ZL1001 Structure flanges 1 ZL1001 Structure flanges 1 MC1600 Blind riser h=1600mm 1 MC1600 Blind riser h=1600mm 1 PV1600 Glass door for structure h=1600mm 1 PV1600 Glass door for structure h=1600mm 1 Tmax T kit Description Q.ty Tmax XT kit LK3300 Kit floor for No. 3 T3 side-by-side 1 LX3300 Kit No.3 XT3 side-by-side L floor 1 PM2624 Panel 24 mod.200x600mm (hxw) M, K 3 PM2624 Panel 24 mod.200x600mm (hxw) M, K 3 PC2600 Plain panel 200x600mm (hxw) M, K 3 PC2600 Plain panel 200x600mm (hxw) M, K 3 PC1600 Plain panel 100x600mm (hxw) M, K 1 PC1600 Plain panel 100x600mm (hxw) M, K 1 AL2000 No. 2 wall fixing brackets L 1 AL2000 No.2 wall fixing brackets L 1 AD1034 Horiz. busbar Kit 250A l=600mm 1 AD1034 Horiz. busbar Kit 250A l=600mm 1 AD1038 No. 2 divider fixing brackets AD1034 1 AD1038 No.2 divider fixing brackets AD1034 1 ED2969 4P busbar 24 modules 3 ED2969 4P busbar 24 modules 3 ED3132 Feeder+cable l=350mm 4P 100A 1 ED3132 Feeder+cable l=350mm 4P 100A 1 GD1520 Feeder+cable l=600mm parallel 4P 100A 3 GD1520 Feeder+cable l=600mm parallel 4P 100A 3 ED3090 No. 4 floor wiring duct supports 2 ED3090 No.4 floor wiring duct supports 2 AD1098 No.4 floor wiring duct supports 2 AD1098 No.4 floor wiring duct supports 2 (*) For selection of the connection according to the circuit-breaker, see page 3/19. > Rapid selection table page 3/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/53 ArTu L modular structures Examples of configurations ArTu 3 T T T T T T T T T T T T T T T ArTu Terminal boxes Terminal boxes ArTu L Series dim.1600x900x195 (1750x1080x240) mm (external hxwxd) IP43 with cable container, plate for Tmax T3-XT3, modular panels Icw 25kA complete with busbar holder, 400A busbars, connections to the circuit-breaker, Unifix H and L Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit SL1600 Back structure 1600x700x240mm (hxwxd) 1 SL1600 Back structure 1600x700x240mm (hxwxd) 1 ZL1000 Base strips for structure 1 ZL1000 Base strips for structure 1 ZL1001 Structure flanges 1 ZL1001 Structure flanges 1 MC1600 Blind riser h=1600mm 1 MC1600 Blind riser h=1600mm 1 PV1600 Glass door for structure h=1600mm 1 PV1600 Glass door for structure h=1600mm 1 PC1600 Plain panel 100x600mm (hxw) M, K 1 PC1600 Plain panel 100x600mm (hxw) M, K 1 LK3000 T3 floor/wall Kit horiz.3/4P 1 LX3300 XT3 floor/wall Kit horiz.3/4P 1 PM3648 Panel 48 mod.300x600mm (hxw) M, K 1 PM3648 Panel 48 mod.300x600mm (hxw) M, K 1 PM2624 Panel 24 mod.200x600mm (hxw) M, K 3 PM2624 Panel 24 mod.200x600mm (hxw) M, K 3 PC2600 Plain panel 200x600mm (hxw) M, K 2 PC2600 Plain panel 200x600mm (hxw) M, K 2 MI1600 Riser CB side-by-side structures h=1600mm 1 MI1600 Riser CB side-by-side structures h=1600mm 1 ZL3000 Base strips for side-by-side ass. 1 ZL3000 Base strips for side-by-side ass. 1 VC1600 Cable container h=1600mm 1 VC1600 Cable container h=1600mm 1 ZL2001 Cable container flanges 1 ZL2001 Cable container flanges 1 PC1602 Blind door for cable container h=1600mm 1 PC1602 Blind door for cable container h=1600mm 1 AL2000 No. 2 wall fixing brackets L 1 AL2000 No. 2 wall fixing brackets L 1 AA1000 No. 2 fixing brackets wall side-by-side structures 1 AA1000 No. 2 fixing brackets wall side-by-side structures 1 ED2969 4P busbar 24 modules 3 ED2969 4P busbar 24 modules 3 ED3132 Feeder+cable l=350mm 4P 100A 1 ED3132 Feeder+cable l=350mm 4P 100A 1 GD1520 DIN rail, pitch 150/200mm 3 GD1520 DIN rail, pitch 150/200mm 3 ED3090 Feeder+cable l=600mm parallel 4P 100A 2 ED3090 Feeder+cable l=600mm parallel 4P 100A 2 TL2000 Scaled crosspiece x cable container 4 TL2000 Scaled crosspiece x cable container 4 PB0802 Scaled busbar holder In=800A (35 kA) 2 PB0802 Scaled busbar holder In=800A (35 kA) 2 BA0400 Busbar In=400A 2 BA0400 Busbar In=400A 2 KB1002 Connections T3 floor/wall 1 1 ED....(*) Connection L 1-L2-L3-N AD1064 No. 12 joining screws l=27 x flat busbars up to 10mm AD1098 No. 4 floor wiring duct supports (*) KB1002 Connections T3 floor/wall ED....(*) Connection L 1-L2-L3-N 1 AD1064 No. 12 joining screws l=27 x flat busbars up to 10mm 1 2 AD1098 No. 4 floor wiring duct supports 2 For selection of the connection according to the circuit-breaker, see page 3/19 . > Rapid selection table page 3/4 > In-depth technical information page 6/1 3/54 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T 3 Terminal boxes ArTu L Series dim. 1800x600x195 (1950x690x240) mm (external hxwxd) IP43 with plate for Tmax T3-XT3 and modular panels Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit SL1800 Back structure 1800x700x240mm (hxwxd) 1 SL1800 Back structure 1800x700x240mm (hxwxd) 1 MC1800 Blind riser h=1800mm 1 MC1800 Blind riser h=1800mm 1 ZL1000 Base strips for structure 1 ZL1000 Base strips for structure 1 ZL1001 Structure flanges 1 ZL1001 Structure flanges 1 PV1800 Glass door for structure h=1800mm 1 PV1800 Glass door for structure h=1800mm 1 LK3000 T3 floor/wall Kit horiz. 3/4P 1 LX3000 XT3 floor/wall Kit horiz. 3/4P 1 PC2600 Plain panel 200x600mm (hxw) M, K 1 PC2600 Plain panel 200x600mm (hxw) M, K 1 PC4600 Plain panel 400x600mm (hxw) M, K 1 PC4600 Plain panel 400x600mm (hxw) M, K 1 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 2 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 2 PM6672 Panel 72 mod. 600x600mm (hxw) M, K 1 PM6672 Panel 72 mod. 600x600mm (hxw) M, K 1 AL2000 No. 2 wall fixing brackets L 1 AL2000 No.2 wall fixing brackets L 1 GD1520 DIN rail, pitch 150/200mm 5 GD1520 DIN rail, pitch 150/200mm 5 AD1098 No. 4 supports for horiz./vert. floor-standing wiring duct 2 AD1098 No.4 supports for horiz./vert. floor-standing wiring duct 2 > Rapid selection table page 3/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/55 ArTu L modular structures Examples of configurations ArTu 3 T T T T T T T T T T T T T T T ArTu ArTu Terminal boxes ArTu L Series dim. 1800x900x195 (1950x1080x240) mm (external hxwxd) IP43 complete with cable container l=300mm, plate for Tmax T3-XT3 and modular panels Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit SL1800 Back structure 1800x700x240mm (hxwxd) 1 SL1800 Back structure 1800x700x240mm (hxwxd) 1 MC1800 Blind riser h=1800mm 1 MC1800 Blind riser h=1800mm 1 ZL1000 Base strips for structure 1 ZL1000 Base strips for structure 1 ZL1001 Structure flanges 1 ZL1001 Structure flanges 1 PV1800 Glass door for structure h=1800mm 1 PV1800 Glass door for structure h=1800mm 1 LK3000 T3 floor/wall Kit horiz. 3/4P 1 LX3000 XT3 floor/wall Kit horiz. 3/4P 1 PC2600 Plain panel 200x600mm (hxw) M, K 1 PC2600 Plain panel 200x600mm (hxw) M, K 1 PC4600 Plain panel 400x600mm (hxw) M, K 1 PC4600 Plain panel 400x600mm (hxw) M, K 1 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 2 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 2 PM6672 Panel 72 mod. 600x600mm (hxw) M, K 1 PM6672 Panel 72 mod. 600x600mm (hxw) M, K 1 AL2000 No. 2 wall fixing brackets L 1 AL2000 No.2 wall fixing brackets L 1 ZL3000 Base strips for side-by-side assembly 1 ZL3000 Base strips for side-by-side assembly 1 ZL2001 Cable container flanges 1 ZL2001 Cable container flanges 1 VC1800 Cable container h=1800mm 1 VC1800 Cable container h=1800mm 1 PO1831 Blind door 1800x300mm (hxw) L, M int. 1 PO1831 Blind door 1800x300mm (hxw) L, M int. 1 PC1802 Blind door for cable container h=1800mm 1 PC1802 Blind door for cable container h=1800mm 1 MI1800 Riser CB side-by-side structures h=1800mm 1 MI1800 Riser CB side-by-side structures h=1800mm 1 AA1000 No. 2 fixing brackets wall side-by-side structures 1 AA1000 No.2 fixing brackets wall side-by-side structures 1 GD1520 DIN rail, pitch 150/200mm 5 GD1520 DIN rail, pitch 150/200mm 5 AD1098 No. 4 supports for horiz./vert. floor-standing wiring duct 3 AD1098 No.4 supports for horiz./vert. floor-standing wiring duct 3 > Rapid selection table page 3/4 > In-depth technical information page 6/1 3/56 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T T T T T 3 Terminal boxes ArTu L Series dim. 1800x800x195 (1950x890x240) mm (external hxwxd) IP43 complete with internal cable container w=200mm Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit SL1808 Back structure 1800x800x195mm (hxwxd) 1 SL1808 Back structure 1800x800x195mm (hxwxd) 1 MC1800 Blind riser h1800 1 MC1800 Blind riser h1800 1 ZL1000 Base strips for structure 1 ZL1000 Base strips for structure 1 ZL1101 Structure flanges w=800mm 1 ZL1101 Structure flanges w=800mm 1 PV1836 Glass door for structure 1800x800mm 36mod 1 PV1836 Glass door for structure 1800x800mm 36mod 1 LK3110 T3 floor/wall Kit horiz. 3/4P 1 LX3110 Kit floor XT3 Kit horiz. 3/4P 1 PC2800 Blind panel 200x800 (hxw) 1 PC2800 Blind panel 200x800 (hxw) 1 PC4800 Blind panel 400x800 (hxw) 1 PC4800 Blind panel 400x800 (hxw) 1 PM2836 Panel 36 mod. 200x800 2 PM2836 Panel 36 mod. 200x800 2 PM3872 Panel mod. h=300 l=800 pitch 150mm 2 PM3872 Panel mod. h=300 l=800 pitch 150mm 2 AL2000 No. 2 wall fixing brackets 1 AL2000 No.2 wall fixing brackets 1 GD1530 DIN rail, pitch 150/200mm w=36 mod.DIN 4 GD1530 DIN rail, pitch 150/200mm w=36 mod.DIN 4 EV1110 No. 50 angled supports 1 row of terminals 1 EV1110 No.50 angled supports 1 row of terminals 1 EV1119 No. 2 busbars 20x5 mm drilled and threaded M6 W=2000mm 1 EV1119 No.2 busbars 20x5 mm drilled and threaded M6 W=2000mm 1 > Rapid selection table page 3/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/57 ArTu L modular structures Examples of configurations ArTu 3 Terminal boxes ArTu L Series dim.1600x800x195 (1750x890x240)mm (external hxwxd) IP43 complete with internal cable container w=200mm, plate for Tmax T3-XT3, and modular panels Code Description Q.ty Code SL1608 Back structure 1600x800x195mm (hxwxd) 1 SL1608 Back structure 1600x800x195mm (hxwxd) ZL1000 Base strips for structure 1 ZL1000 Base strips for structure 1 ZL1101 Structure flanges w =800mm 1 ZL1101 Structure flanges w =800mm 1 MC1600 Blind riser h1600 1 MC1600 Blind riser h1600 1 PV1624 Glass door for structure 1600x800mm 24mod 1 PV1624 Glass door for structure 1600x800mm 24mod 1 VC1625 Int. cable container h=1600mm 1 VC1625 Int. cable container h=1600mm 1 LK3000 T3 floor/wall Kit horiz. 3/4P 1 LX3000 XT3 floor/wall Kit horiz. 3/4P 1 PM3624 Panel 24 mod. 300x600 2 PM3624 Panel 24 mod. 300x600 2 PM2624 Panel 24 mod. 200x600 2 PM2624 Panel 24 mod. 200x600 2 PC2600 Blind panel 200x600 2 PC2600 Blind panel 200x600 2 AL2000 No. 2 wall fixing brackets 1 AL2000 No.2 wall fixing brackets 1 GD1520 DIN rail, pitch 150/200mm 4 GD1520 DIN rail, pitch 150/200mm 4 Tmax T kit Description Q.ty Tmax XT kit > Rapid selection table page 3/4 > In-depth technical information page 6/1 3/58 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 1 ArTu T T T T T T T T T T T T T T T 3 Morsettiere Terminal boxes ArTu L Series dim.1800x800x195 (1950x890x240)mm (external hxwxd) IP43 complete with internal cable container w =200mm, plate for Tmax T3-XT3 and modular panels Code Description Q.ty Code SL1808 Back structure 1900x800x195mm (hxwxd) 1 SL1808 Back structure 1900x800x195mm (hxwxd) 1 MC1800 Blind riser h1800 1 MC1800 Blind riser h1800 1 ZL1000 Base strips for structure 1 ZL1000 Base strips for structure 1 ZL1101 Structure flanges w=800mm 1 ZL1101 Structure flanges w=800mm 1 PV1824 Glass door for structure 1800x800mm 24mod 1 PV1824 Glass door for structure 1800x800mm 24mod 1 LK3000 T3 floor/wall Kit horiz. 3/4P 1 LX3000 XT3 floor/wall Kit horiz. 3/4P 1 PC2600 Blind panel 200x600 1 PC2600 Blind panel 200x600 1 PC4600 Blind panel 400x600 1 PC4600 Blind panel 400x600 1 PM2624 Panel 24 mod. 200x600 2 PM2624 Panel 24 mod. 200x600 2 PM6672 Panel 74 mod. 600x600 1 PM6672 Panel 74 mod. 600x600 1 AL2000 No. 2 wall fixing brackets 1 AL2000 No.2 wall fixing brackets 1 VC1825 Internal cable container h=1800mm 1 VC1825 Internal cable container h=1800mm 1 GD1520 DIN rail, pitch 150/200mm 5 GD1520 DIN rail, pitch 150/200mm 5 Tmax T kit Description Q.ty Tmax XT kit > Rapid selection table page 3/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 ABB Technical catalogue | 1STC008001D0204 3/59 ArTu M monobloc structures General 4/2 Selection of the structure 4/4 Kit for installing apparatus 4/6 Distribution systemse 4/13 Ordering codes 4/21 Examples of configurations 4/48 4 Technical catalogue | 1STC008001D0204 4/1 ArTu M monobloc structures General The ArTu M switchgear offers a simple and functional solution for constructing secondary and terminal distribution switchgear for uses where the degree of protection is important. 4 It can be wall or floor-mounted, only requiring assembly of the front door and side panels thanks to their characteristic monobloc structure. Within the series, the wall-mounted switchgear is preset for installation of System Pro M modular apparatus and Tmax T1, T2 and T3 T serie up to T3 250 A, XT series up to XT3, (fixed version with front terminals) moulded-case circuit-breakers up to 250A and the Unifix wiring system. The wall-mounted models include two depths (150 and 200mm), a functional width of 24 DIN modules (600 mm) and four different heights (600, 800, 1000 and 1200 mm), corresponding to 3, 4, 5 and 6 DIN rows with 200 mm centre distance. 4/2 1STC008001D0204 | ABB Technical catalogue It is also possible to use the 150 mm centre distance, thereby considerably increasing the internal capacity, which reaches 4, 5, 6 and 8 DIN rows respectively. The floor-mounted switchgear, on the other hand, has a depth of 250 mm and is available in two functional widths (600 mm 24 DIN modules and 800 mm 36 DIN modules or 24 DIN modules plus cable riser) in four heights (1400, 1600, 1800 and 2000 mm), corresponding to 7, 8, 9 and 10 DIN rows respectively, with 200 mm centre distance. Again in this case it is possible to use the 150 mm centre distance to increase the internal capacity, taking this to 9, 10, 12 and 13 DIN rows respectively. The sides of the M series floor-mounted switchgear consist of two removable side panels, which allow lateral coupling of the structures or cable containers with useful width of 300mm. The modular System Pro M, and the Tmax up to T6 T serie up to T6 800 A, XT series up to XT4,(fixed version with front terminals) moulded-case circuit-breakers in the fixed version with front terminals are found within the floor-mounted version. The busbar systems with shaped section up to 800A, flat up to 630A and the Unifix cabling system can be used. The front door, available either made of transparent tempered glass applied from the inside, or of plain steel sheet, can be replaced according to the different application requirements by finishing frames with IP 31 degree of protection. It is also possible to carry out fixing to the wall using dedicated brackets for the floor-mounted versions. The 100 mm high base strip, complete with removable flanges, is already mounted on the structure, and allows easy handling with transpallets. Removable flanges for conductor inlet are also provided in the top and bottom area. The maximum rated current is 630 A and the degree of protection varies from IP31 (without front door) to IP65 (with front door). Cabling control is made easier thanks to lateral removable panels Upper removable flanges allow easy access Technical characteristics Wall-mounted Floor-mounted D=115/165 D=195 Compliance with Standards CEI EN 60439-1/IEC 61439-1-2 CEI EN 60439-1/IEC 61439-1-2 Rated service voltage Ue up to 690 V up to 690 V Rated insulation voltage Ui up to 1000 V up to 1000 V Rated frequency 50-60 Hz 50-60 Hz Rated impulse withstand voltage Uimp 6 kV 8 kV Rated current In up to 250 A up to 630 A Rated short-time short-circuit withstand current Icw up to 25 kA up to 35 kA Rated peak short-circuit current Ipk up to 52.5 kA up to 74 kA Degree of protection IP 65 with door 31 without door 65 with door Technical catalogue | 1STC008001D0204 4/3 4 ArTu M monobloc structures Selection of the structure Rapid selection tables 24 mod. 100 24 mod. 36 mod. 200 200 200 300 300 300 100 600 24 mod. (W) (D) W D (D) W D (H) H 200 300 (W) (H) H 4 Structure No. vert. mod. No. of DIN mod. H=100mm which can be installed Functional dimensions (2) Overall external dimensions (1) Wall structures Floor structures DIN panel 150mm DIN panel 200mm (H) centre dist. centre dist. mm (W) mm (D) (3) mm H W mm mm mm Basic version Basic version 6 96 (24x4) 72 (24x3) 700 700 150 600 600 115 SM6061 - 8 120 (24x5) 96 (24x4) 900 800 700 150 700 200 D (3) 600 115 SM8061 - 600 165 SM8062 - 10 144 (24x6) 120 (24x5) 1100 700 200 1000 600 165 SM1062 - 12 192 (24x8) 144 (24x6) 1300 700 200 1200 600 165 SM1262 - 14 216 (24x9) 168 (24x7) 1596 724 250 1400 600 195 - SM1462 16 240 (24x10) 192 (24x8) 1796 724 250 1600 600 195 - SM1662 360 (36x10) 288 (36x8) 924 250 800 195 - SM1682 18 288 (24x12) 216 (24x9) 1996 724 250 1800 600 195 - SM1862 432 (36x12) 324 (36x9) 924 250 800 195 - SM1882 20 313 (24x13) 240 (24x10) 2196 724 250 2000 600 195 - SM2062 468 (36x13) 360 (36x10) 924 250 800 195 - SM2082 (L) L (P) P (H) H Additional cable container W = 300mm Overall external dimensions (1) Functional dimensions (2) Structure Internal door front IP31 External door front IP65 Side panel Finishing section IP31 See page 9/35 D (3) (H) mm (W) mm (D) mm H W mm mm mm 1796 424 250 1600 300 195 VC1632 PO1631 PO1630 LF1625 1996 424 250 1800 300 195 VC1832 PO1831 PO1830 LF1825 2196 424 250 2000 300 195 VC2032 PO2031 PO2030 LF2025 The cable container, placed at the side of the structure with the special kit (AD1012), keeps the IP65 degree of protection when installed with an external door. The external doors are used on the additional cable container to be placed side by side with an ArTu structure with door (IP65). The internal doors are used on the additional cable container placed side by side with an ArTu structure in the IP31 version (i.e. without door and with finishing profiles). This ensures uniformity of appearance between the structure and additional cable container. Furthermore, the internal doors can be used as internal segregations of the cable container: should a segregation with door of the additional cable container open be requested, it is possible to mount both the internal and external door at the same time. > Selection by components page 4/21 > In-depth technical information page 6/1 4/4 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 24 mod. 36 mod. 24 mod. 24 mod. 4 Side covering IP65 Front doors IP65 Internal cable container Side panel Glass door 24/36 mod. Glass door 24 mod.+ int cable container Blind door 24/36 mod. - PV6060 - PO6060 - - PV8060 - PO8060 - - PV8060 - PO8060 - - PV1060 - PO1060 - - PV1260 - PO1260 - LF1425 PV1460 - PO1460 - LF1625 PV1660 - PO1660 - LF1625 PV1688 PV1680 PO1680 VC1622 LF1825 PV1860 - PO1860 - LF1825 PV1888 PV1880 PO1880 VC1822 LF2025 PV2060 - PO2060 - LF2025 PV2088 PV2080 PO2080 VC2022 (1) The overall dimensions of the ArTu M switchgear starting from the 1400mm (1596mm) height include the base strip h=100mm and the side panels. (2) The functional dimensions represent the useful space for installing the apparatus. (3) In this catalogue, reference is always made to the 150/200/250mm depths corresponding to the external overall dimensions with front door. Finishing section IP31 See page 4/26 The useful dimensions between panel and bottom of the structure are 115/165/195mm. (P) P (L) L (H) H Structure for constructing IP40 switchgear for operating theatres Overall external dimensions (1) Functional dimensions (2) Complete structure (1) (H) mm (W) mm (D) mm H mm W mm D (3) mm 100 700 200 1000 600 165 SM1069 Spare parts Glass door Blind door PV4060 PO6069 The QSO switchgear for operating theatres is complete with brackets (AD1009 No. 4 pieces) for installation of the wiring duct, two DIN rail kits (GD6002 and PM2624 No. 2 pieces) and relative brackets for wall fixing (4 pieces), 2 air passage filters and closing box with Yale insert. > Selection by components page 4/21 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/5 ArTu M monobloc structures Kit for installing apparatus Solutions recommended for installation of the apparatus Type of structure/Installation Wall-mounted structures Apparatus Vertical on DIN rail System Pro M modular apparatus Floor-mounted structures Vertical Horizontal Vertical Horizontal OT 4 Vertical on DIN rail OESA OETL Tmax T1 3/4 poles - fixed / front terminals Tmax T1 4 poles - fixed / front terminals +RC mod. (1) Tmax T2 3/4 poles - fixed / front terminals Tmax T2 4 poles - fixed / front terminals +RC mod. (1) Tmax T3 3/4 poles - fixed / front terminals Tmax T3 4 poles - fixed / front terminals +RC mod. (1) Tmax T4 Tmax T4 3/4 poles - fixed / front terminals 4 poles - fixed / front terminals +RC mod. Tmax T5 3/4 poles - fixed / front terminals Tmax T5 4 poles - fixed / front terminals +RC mod. Tmax T6 3/4 poles - fixed / front terminals Busbar with shaped section Linear busbar holder () Scaled busbar holder () Flat busbar Linear busbar holder Unifix L () () Unifix H () Tmax XT1 3/4 poles - fxed / front terminals Tmax XT1 4 poles - fxed / front terminals +RC mod. (1) Tmax XT2 3/4 poles - fxed / front terminals Tmax XT2 4 poles - fxed / front terminals +RC mod. Tmax XT3 3/4 poles - fxed / front terminals Tmax XT3 4 poles - fxed / front terminals +RC mod. (1) Tmax XT4 3/4 poles - fxed / front terminals Tmax XT4 4 poles - fxed / front terminals +RC mod. Side-by-side Tmax XT kits (1) Only for structures D=200mm. - () Can only be installed in the structure. - () Can only be installed in the cable container. Assembly solution ArTu ArTu 300 PM3648 100 300 PM3648 300 Required distance between H=300mm and panel H=200mm PM3648 200 200 PC1600 PC2600 200 PM2624 PC2600 Side-by-side assembly between a H=300mm and a H=200mm panels is not allowed > Selection by components page 4/21 > In-depth technical information page 6/1 4/6 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 System Pro M modular apparatus, Tmax T1-T2-T3, XT1 and XT3, OT≤ 160 and supports for Unifix H AD1086 GD6002 GD8002 PM6672 GD6008 GD6009 PM2624 PM3872 PM2836 PM3648 GC6002 GC8002 AD1600 W=600mm 4 W=800mm Panel 2 DIN rows 48 DIN mod. Panel 1 DIN row 24 DIN mod. DIN rail kit 24 DIN mod. DIN rail kit 36 DIN mod. Panel 3 DIN rows 72 DIN mod. Panel 1 DIN row 36 DIN mod. H (mm) Standard aluminium version 200 GD6002 PM2624 GD8002 PM2836 300 GD6002 PM2312 GD8002 PM2315 300 GD6008 600 3x GD6002 PM3648 GD6009 Panel 2 DIN rows 72 DIN mod. PM3872 PM6672 Version fitted with accessories (complete with 60x80 wiring duct and AD1037 supports) 200 GC6002 PM2624 GC8002 PM2836 Reinforced version for Tmax and Tmax differential RC 222/1 mod. 200mm 200 GD6010(1) PM2624 GD8010 PM2836 Reinforced version Tmax + differential module (2) 300 GD6010(1) PM2312 GD8010 PM2315 PM3624 AD1061 PM3836 Unifix H fixing brackets 300 (1) AD1061 Cannot be installed on wall-mounted version. (2) Version for Tmax with differential module underplaced RC 221/222. Completion items for installation on DIN rail 05087 (60x80) 05087 (60x80) AD1037 OFF 05087 (60x80) OFF OFF OFF AD1009 OFF OFF OFF OFF OFF OFF OFF OFF AP6001 AP6000 05087 (60x80) OFF 05085 (40x80) OFF OFF OFF OFF OFF OFF GD6002 GD8002 OFF OFF OFF GD6002 GD8002 Supports for horizontal wiring duct Allows assembly of the cabling wiring duct horizontally up to 60x80mm. The AD1009 plastic model can be positioned on the rear of the DIN rail, whereas the AD1037 metal version is fixed onto the brackets of DIN rail GD6002/ GD8002, and allows adjustment of the wiring duct depth. Code AD1009 AD1037 Description Horizontal wiring duct (plastic) supports Horizontal wiring duct (metal) supports OFF OFF OFF GD6008 GD6009 OFF OFF OFF OFF OFF Polished flange for Tmax XT2-XT4 positioned side by side on plate Code AD3310 AD3311 AD3312 AD3313 Description AD3310 Polished flange for plate-mounted XT2 3P AD3311 Polished flange for plate-mounted XT2 4P AD3312 Polished flange for plate-mounted XT4 3P AD3313 Polished flange for plate-mounted XT4 4P Tmax XT2-XT4 on DIN rail cannot be mounted in ArTu switchboards. Depth adapter DIN window hole covers Code AP6001 Code AD1086 AD1088 AD1089 AP6000 Description No.1 depth adapter for Tmax T1-T2-T3-XT1-XT3 W=600mm wall-mounting No.1 depth adapter for Tmax T1-T2-T3-XT1-XT3 W=600mm floor-standing > Selection by components page 4/21 > In-depth technical information page 6/1 Description DIN L=2000mm hole cover strip - grey RAL 7035 DIN 24 modules hole cover strip - grey RAL 7035 DIN 36 modules hole cover strip - grey RAL 7035 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/7 ArTu M monobloc structures Kit for installing apparatus Horizontal installation Fixed 4 Circuit-breaker front terminals No. poles Dimensions 24 DIN mod. H (mm) W=600mm 3-4 200 KT3118 (1) (2) 200 KX3618 (1) KT1117 Fixed + RCD underneath 36 DIN mod. W=800mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm Wall-mounted structure Tmax T3 Tmax XT3 3 /4 Floor-mounted structure Tmax T1 3-4 200 Tmax T1 4 200 Tmax T2 3-4 200 Tmax T2 4 200 Tmax T3 3-4 200 Tmax T3 4 300 Tmax T4 3-4 200 Tmax T4 4 200 Tmax T5 3-4 300 Tmax T5 4 300 Tmax T6 3-4 Tmax XT1 Tmax XT1 CB + RC mod. Tmax XT2 KT1102 KT2117 KT3112 KL3113 KT4112 KL4115 KT5112 KL5114 500 KT6113 KL6113 3(2)/4 200 KX1617 4 200 3(2)/4 200 Tmax XT2 CB + RC mod. 4 200 Tmax XT3 3(2)/4 200 Tmax XT3 CB + RC mod. 4 300 Tmax XT4 3(2)/4 200 Tmax XT4 CB + RC mod. 4 200 KT2102 KL2103 KT3102 KL3103 KT4110 KL4116 KT5110 KL5116 KX1602 KX2619 KX2602 KX3612 KL3613 KX4612 KX4615 KX3602 KX3603 KX4610 Hole cover W=2000mm Article AD1086, 24 DIN modules AD1088, 36 DIN modules AD1088 , colour grey RAL 7035. (1) Kit for wall-mounted ArTu M D=200mm. (2) For 3 poles breakers please order accessory flange codes: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting - AD3308 XT4 3P Flange for plate-mounting > Selection by components page 4/21 > In-depth technical information page 6/1 4/8 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Vertical installation Fixed Circuit-breaker front terminals No. poles Dimensions 24 DIN mod. H (mm) W=600mm TTmax T1-T2-T3-XT1-XT3 on DIN 35 rail (see page 4/7) Tmax T3 3-4 300 KT3212 Tmax T4 3-4 400 KT4212 Tmax T4 4 500 Tmax T5 3-4 400 Tmax T5 3-4 500 Tmax T6 3-4 500 KT6213 Tmax XT1 3(1)/4 200 KX1618 Tmax XT1 CB + RC mod. 4 300 Tmax XT1 N 3 CBs side by side 3(1)/4 200 KX1604 Tmax XT2 No.3/4(2) CBs side by side 3-4(3) 200 KX2604 Tmax XT3 3(1)/4 300 KX3614 Fixed + RCD underneath 36 DIN mod. W=800mm 24 DIN mod. W=600mm 4 36 DIN mod. W=800mm KT4102 KT5212 KL5212 KT5102 KL5102 KL6213 KX1603 Tmax XT3 CB + RC mod. 4 300 Tmax XT4 3(1)/4 300 KX4614 KX3609 Tmax XT4 No.3/4(3) CBs side by side 3/4(3) 300 KX4604 Tmax XT4CB + RC mod. 4 400 KX4602 Hole cover W=2000mm Article AD1086, 24 DIN modules AD1088, 36 DIN modules AD1088 , colour grey RAL 7035. (1) For 3 poles breakers please order accessory flange codes: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting - AD3308 XT4 3P Flange for plate-mounting. (2) No. 4 CBs side by side 3P, No. 3 CBs side by side 4P. (3) Order AD3310, AD3311, AD3312 and AD3313 polished flange. > Selection by components page 4/21 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/9 ArTu M monobloc structures Kit for installing apparatus Plain back plates, plain and ventilated panels PF.... 4 FR.... PC.... Back plates Plain recessed Plain flat Plain recessed 24 DIN mod. W=600mm 36 DIN mod. W=800mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 24 DIN mod. W=600mm PC1600 PC1800 PF2610(1) PF2810 FR2601 FR2801 PC2600 PC2800 PC3600 PC3800 PF4610(1) PF4810 FR4601 FR4801 PC4600 600 PC6600 800 PC8600 PC8800 1600 PC1660 PC1680 1800 PC1860 PC1880 2000 PC2060 PC2080 100 200 300 400 (1) PA.... Panels Plain flat H (mm) PR.... 36 DIN mod. W=800mm Ventilated 24 DIN mod. W=600mm 36 DIN mod. W=800mm 24 DIN mod. W=600mm PR2600 PR2800 PA2600 PC4800 PR4600 PR4800 PC6800 PR6600 PR6800 PA1600 Can also be installed on wall-mounted Artu M version D=200mm. Can be used to mount all the non-modular apparatus. For useful dimensions, please see page 7/20. Useful internal space Useful internal space Minimum distance between back plate and busbar holder Recessed plate Flat plate Recessed plate min. 12,5 Recessed Recessed panel panel Recessed panel 105 Flat panel Flat panel Flat panel 40 > Selection by components page 4/21 > In-depth technical information page 6/1 4/10 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Kit for OT200÷400 4 Dimensions (mm) Description Code H W Poles Control Maximum length handle Minimum length shaft Kit OT200/250/315/400 vertical KO2260 300 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT200/250/315/400 horizontal KO2261 300 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT200/250/315/400 vertical KO2280 400 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT200/250/315/400 horizontal KO2281 600 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Panels for square measuring instruments These allow installation of measuring instruments and relative changeover switches. EV1135 EV1136 2-instrument panel 4-instrument panel 72x72mm 96x96mm 72x72mm 96x96mm H (mm) 24 DIN mod. W=600mm 36 DIN mod. W=800mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 200 PS2720 PS2728 PS2960 PS2968 PS4720 PS4728 PS4960 PS4968 Square instrument hole covers Code Description EV1135 Hole cover of 72x72mm instrument black RAL 9005 EV1136 Hole cover of 96x96mm instrument black RAL 9005 > Selection by components page 4/21 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/11 ArTu M monobloc structures Kit for installing apparatus Installation of terminal boxes on DIN rail AD1044 AD1041 AD1055 AD1055 AD1041 AD1054 4 Terminal box mounting position Installation on DIN rail Structure Horizontal AD1054 Horizontal angled 45° AD1041 Vertical Internal cable container External cable container AD1044 AD1055 The ArTu switchgear is preset for assembly of terminal boxes with the sole exception of the models in the M wall-mounted series with 150mm depth. Installation of terminal boxes on DIN rail and earthing busbar EV1110 EV1112 EV1119 Code Angled supports for terminal boxes and earthing busbar EV1110-EV2110 Angled supports 1 row of terminals EV1112-EV2112 Angled supports 1 row of terminals + earth > Selection by components page 4/21 > In-depth technical information page 6/1 4/12 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Distribution systems Modular dividers Single-pole Code Three-poles AD1076 AD1080(1) AD1007 AD1081(2) AD1030 AD1031 AD1075 AD1006 In (A) 125 125 175 175 250 400 125 175 Icw (kA) 4.4 4.2 11 11 21 21 4.4 11 Version pole 1 1 1 1 1 1 3 3 DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate min. 10 6 16 10 35 95 10 16 max 35 35 70 70 35 70 6 6 Installation Power supply Ø cable (mm2) No. outgoing feeder Ø cable (mm2) 1,5÷10 2,5÷16 10 6 10 6 2,5÷25 Dimensions HxWxD (mm) No. DIN modules 120 185 4 4 5 5 2 2 4 71x45x42,5 74x27x47 71x45x42,5 92x35x49 95.5x45x49 95.5x45x49 71.5x80x42,5 71.5x80x42,5 2,5 1,5 2,5 2 3 3 4.5 4.5 Rated service voltage Ue (V) 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc Degree of protection IP 20 20 20 20 20 20 20 20 Four-pole Code AD1004 AD1028 AD1029 AD1027 AD1034 AD1053 In (A) 125 125 125 160 250 250 Icw (kA) 10 4.2 4.2 6.2 15 15 Ipk (kA) 24 25 25 20 30 30 Version poli 4.2 4 4 4 4 4 DIN35/plate DIN35/plate DIN35/plate DIN35 with AD1035 brackets with AD1035 brackets 6 6 6 10 25 with cable terminal 25 with cable terminal 50 No. 22 holes M5 with 17,5mm pitch per phase (threaded busb. 20x5mm) No. 32 holes M5 with 17,5mm pitch per phase (threaded busb. 20x5mm) Installation Power supply Ø cable (mm2) min. max No. outgoing feeder Ø cable (mm2) 35 1/6 5/phase 1.5/6 4/neutral 1.5/10 2/phase 7 9 6/neutral 1.5/16 2 2.5/16 Dimensions HxWxD (mm) No. DIN modules 8 6/25 2 2 3 74.5x98x45 93x89x48 96x126x48 90x160.5x50 150x600x70 150x800x70 5,5 5 7 9 24 36 Rated service voltage Ue (V) 1000 Vac 1500 Vdc 440 440 440 500 500 Degree of protection IP 20 20 20 20 (1) Possibility of putting in parallel with AD1083 connections. (2) Possibility of putting in parallel with comb type connection (not supplied). > Selection by components page 4/21 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/13 ArTu M monobloc structures Distribution systems Flexible busbars up to 1000 A Cross-section 4 (1) Capacity (A) Dimensions IP31 IP41 IP65 WxW (mm) Section dimensions (mm2) Lenght (mm) Weight (kg) In (A) Code No. busbar/ phase 250 BF1602 1 395 323 250 20x3 60 2000 1,42 400 BF2502 1 498 460 400 20x5 100 2000 2,15 500 BF4002 1 660 620 500 24x6 144 2000 3 630 BF4012(1) 1 758 702 630 32x5 160 2000 3,36 1000 BF6302 1 1203 1140 1000 40x8 320 2000 6,33 Only for front extended terminals and rear terminals. Busbars with shaped section for applications up to 800 A Cross-section Capacity (A) Dimensions IP31 IP41 IP65 WxW (mm) Section dimensions (mm2) Lenght (mm) Weight (kg) In (A) Code No. busbar/ phase 520 BA0400 1 630 520 35 20x20 200 1730 4 830 BA0800 1 970 830 35 20x20 200 1730 4,4 > Selection by components page 4/21 > In-depth technical information page 6/1 4/14 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Selection of busbar holders and crosspieces Vertical installation 1 2 Back of internal cable container Back of structure or external cable container 3 Direct connection with Unifix H Busbar holder Type 4 Crosspieces for fixing to structure Busbars with shaped section In ≤ 400÷800A Structure 24/36 DIN modules Installation Scaled up to 800A PB0802 Internal cable container Additional cable container 1 TR3001 (W=300mm) BA0400 BA0800 2 Linear up to 800A PB0803 TV2000 (W=200mm) 1 TV6200 (W=600mm) TV8200 (W=800mm) 3 TV6200 (W=600mm) TV8200 (W=800mm) BA0400 BA0800 Selection and assembly of busbars with shaped section and busbar holders Using the correct number of busbar holders ensures resistance to electrodynamic forces in the case of a short-circuit. Assess the maximum distance (max X) which must not be exceeded between two consecutive busbar holders according to the max. Icc. 1/4 X X X 1/4 X The distance between the first busbar holder and the end of the busbar must not exceed 1 /4 of “X”. No. of busbar holders according to the max. Icc Busbar Capacity Busbar holder No. busbars per phase 25 kA X max (mm) 35 kA X max (mm) 50 kA X max (mm) 65 kA X max (mm) 75 kA X max (mm) 85 kA X max (mm) X max 100 kA (mm) Linear BA0400 400A PB0803 1 4 550 5 425 - - - - - - - - - - BA0800 800A PB0803 1 4 550 4 550 - - - - - - - - - - Scaled BA0400 400A PB0802 1 4 550 4 550 - - - - - - - - - - BA0800 800A PB0802 1 4 550 4 550 - - - - - - - - - - max X = maximum distance not to be exceeded between two consecutive busbar holders. > Selection by components page 4/21 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/15 ArTu M monobloc structures Distribution systems Flat busbars for distribution up to 630 A capacity (A) Cross-section In (A) Code No. busbar/ phase IP31 275 BR0250 1 440 BR0400 695 BR0630 Dimensions IP43 Icw max (kA) WxW (mm) Lenght (mm) Weight (kg) 290 275 23 15x5 1750 1,35 1 475 440 23 25x5 1750 1,8 1 750 695 32 30x10 1750 4,4 4 Busbar holders and crosspieces Vertical installation 1 Back of structure, external cable container Busbar holder Type Flat busbars In = 250A Crosspieces for fixing to structure In = 400A In = 630A Linear up to 630A BP0630 (1) Installation 1 Structure Additional cable container TV6200 (W=600mm) TV8200 (W=600mm) TR3001 (W=300mm) The busbar terminal protection covers must be ordered separately BP0632. > Selection by components page 4/21 > In-depth technical information page 6/1 4/16 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Selection and assembly of flat busbars and busbar holders Using the correct number of busbar holders ensures resistance to electrodynamic forces in the case of a short-circuit. Assess the maximum distance (max X) which must not be exceeded between two consecutive busbar holders according to the max. Icc. 1/4 X X X 4 1/4 X The distance between the first busbar holder and the end of the busbar must not exceed 1/4 of “X”. No. of busbar holders according to the max. Icc Busbar Capacity BR0250 250A BR0400 400A BR0630 630A Busbar holder No. busbars per phase 25 kA 1 11 175 15 125 18 100 - - BP0630 1 9 225 15 125 18 100 - - 1 9 225 15 125 18 100 - - X max (mm) X max (mm) 35 kA 50 kA X max (mm) 65 kA X max (mm) max X = maximum distance not to be exceeded between two consecutive busbar holders. Flat drilled and threaded busbars for earthing connection Cross-section 5 Pitch WxW (mm) Length (mm) AxB (mm) EV1119 6 MA 20 20x5 2000 EV1120 6 MA 20 25x5 2000 EV1121 6MA 25 50x5 2000 EV1122 6MA 34x30 EV1123 8MA 34x30 EV1124 6MA 40x50 EV1125 8MA 40x50 6MA 20 25 5 Threading 6MA 20 20 5 Code 6MA 25 50 A B > Selection by components page 4/21 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/17 ArTu M monobloc structures Distribution systems Unifix systems Technical characteristics Unifix H Unifix L Rated service voltage (Ue) 690V AC 400V AC 500V AC Rated insulation voltage (Ui) 1000V AC Rated impulse withstand voltage (Uimp) 8kV 6kV Rated frequency 50/60Hz 50/60Hz central power supply 400A 100A lateral power supply 320A 80A Rated current (In) 4 Rated short-time withstand current (Icw) 25kA Maximum peak current (Ipk) 52,5kA-400V Maximum installable circuit-breaker size 250A Conditioned short-circuit current (Icc) Tmax T1 36kA-400V Tmax T2 N, S (1) 50kA-400V Tmax T3 50kA-400V Tmax XT1 50kA-400V Tmax XT3 50kA-400V With circuit-breaker 100A S200 6kA-400V S200M 10kA-400V S200P 25kA-400V Degree of protection IP20 with accessory IP20 Characteristics of the insulating material Self-extinguishing thermoplastic V1 (UL94) Self-extinguishing thermoplastic V1 (UL94) Characteristics of the conductor material Electrolytic copper Electrolytic copper Width (No. modules/mm) 24/600 36/800 12/400 24/600 36/800 Installation of Unifix system Frame for Tmax T and Tmax XT series 300x600mm (HxW) 300x800mm (HxW) ED2183 ED2191 Fixing brackets H=300mm AD1097 Crosspiece for direct connection to W=600mm the rear busbars with shaped section W=800mm with PB0803 TL1000 Busbar 2P Busbar 4P Fixing support (1) TL1100 12 mod. ED2993 18 mod. ED3009 24 mod. ED3017 36 mod. ED3025 12 mod. ED2944 18 mod. ED2951 24 mod. ED2969 36 mod. ED2977 24 mod. GD1520 36 mod. GD1530 Select circuit-breakers in version with front terminals for copper cables. > Selection by components page 4/21 > In-depth technical information page 6/1 4/18 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Unifix systems Table for selecting connections according to the circuit-breaker Circuit-breaker series Unifix H SN201 DS941 (top power supply) ED2654 L1/N 40A ED2662 L2/N 40A ED2670 L3/N 40A (top power supply) ED2531 L1 63A ED2549 L2 63A ED2556 L3 63A ED2564 N 63A ED2845 False pole module (top power supply) ED2557 L1 ≤32A ED2558 L2 ≤32A ED2559 L3 ≤32A ED2560 N ≤32A ED2551 L1 125A ED2552 L2 125A ED2553 L3 125A ED2554 N 125A ED2550 False pole module (top power supply) ED2720 L1 100A ED2738 L2 100A ED2746 L3 100A ED2753 N 100A (top power supply) ED2894 L1/N 16A ED2902 L1/L2 16A S200 - DS200 F200 up to 63A (Unifix L) S800 S280 (80-100A) E200 up to 100A - RS370 - F200 80/100A (Unifix H) MDRC - Various apparatus Tmax T1 Tmax XT1 Tmax T2 Tmax T3 Tmax XT3 Circuit-breaker Residual current Selenoid operator Circuit-breaker Residual current Selenoid operator Circuit-breaker Residual current (top/bottom power supply) ED2217 L1 Top/L2 Bottom ED2225 L2 Top/L1 Bottom ED2233 L3 Top/N Bottom ED2241 N Top/L3 Bottom ED2373 False pole module ED2381 False pole module (top/bottom power supply) ED2258 L1 Top/L2 Bottom ED2266 L2 Top/L1 Bottom ED2274 L3 Top/N Bottom ED2282 N Top/L3 Bottom ED2373 False pole module ED2399 False pole module (top power supply) ED2290 L1 ED2308 L2 ED2316 L3 ED2324 N ED2373 False pole module Unifix L ED3272 L1/N 40A ED3280 L2/N 40A ED3298 L3/N 40A (bottom power supply) ED2572 L1 63A ED2590 L2 63A ED2598 L3 63A ED2606 N 63A ED3033 L1 100A ED3041 L2 100A ED3058 L3 100A ED3066 N 100A 4 ED3132 pow. supply L1/L2/L3/N - 350mm ED0026 pow. supply L1/L2/L3/N - 1500mm ED0025 pow. supply L1/L2/L3/N - 2500mm (low power supply) ED2910 L1/N 16A ED2928 L1/L2 16A ED3108 pow. supply 2 cables L1/N 16A ED3116 pow. supply 3 cables L1/L2/L3 16A ED3124 pow. supply 4 cables L1/L2/L3/N 16A ED3355 pow. supply 2 cables L1/N 40A ED3363 pow. supply 3 cables L1/L2/L3 40A ED3371 pow. supply 4 cables L1/L2/L3/N 71A (bottom power supply) ED2332 L1 ED2340 L2 ED2357 L3 ED2365 N For the DDA locks, order the false module ED2845 codes separately according to the size of the residual current lock. If mounting XT1-XT3 on Unifix H, the polished flanges AD3301, AD3302, AD3303, AD3304 must also be ordered, see spare parts page 4/47. > Selection by components page 4/21 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/19 ArTu M monobloc structures Distribution systems Unifix systems Direct connection with the 400/800A system of busbars with shaped section. Feeder module for 400A frame (L1-L2-L3-N). Direct power supply of the bases by means of feeder module ED2209. Power supply by means of general row circuit-breaker. 4 N N L1 L1 T T L2 L2 N L3 L3 T N N Connections (L1-L2-L3-N) for System Pro M modular apparatus. Power supply of the busbar with 100A feeder module without cable. Terminal capacity 35mm2. Direct power supply of the busbars by means of feeder module. Power supply by means of modules and cables in parallel. T N T > Selection by components page 4/21 > In-depth technical information page 6/1 4/20 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu M monobloc structures Ordering codes Wall-mounted structures Basic version Dimensions (mm) H D Code Package/ No. of pieces Monobloc structure 24 DIN mod - W=600mm 600 115 SM6061 1/1 800 115 SM8061 1/1 800 165 SM8062 1/1 1000 165 SM1062 1/1 1200 165 SM1262 1/1 4 IP40 version for operating theatre The QSO switchgear for operating theatres is complete with brackets (AD1009 No. 4 pieces) for installation of the wiring duct, two DIN rail kits (GD6002 and PM2624 No. 2 pieces) and relative brackets for wall fixing (4 pieces), 2 air passage filters and closing box with Yale insert. Dimensions (mm) H D Code Package/ No. of pieces Monobloc structure 24 DIN mod - W=600mm 1000 165 SM1069 1/1 Embedding frame Dimensions (mm) > Rapid selection table page 4/4 H W Code Package/ No. of pieces 600 600 H70001 1/1 800 600 H70002 1/1 1000 600 H70003 1/1 1200 600 H70004 1/1 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/21 ArTu M monobloc structures Ordering codes LF.... SM.... Floor-standing structures Basic version Dimensions (mm) H D Code Package/ No. of pieces Monobloc structure 24 DIN mod - W=600mm 4 1400 195 SM1462 1/1 1600 195 SM1662 1/1 1800 195 SM1862 1/1 2000 195 SM2062 1/1 Monobloc structure 36 DIN mod - W=800mm 1600 195 SM1682 1/1 1800 195 SM1882 1/1 2000 195 SM2082 1/1 800 Internal cable container for floor-mounted structures VC..22 Only to be ordered for the 36 DIN mod. structures (W=800mm). Consisting of a functional upright and a blind door complete with two key locks. Can be mounted either on the right or left. Dimensions (mm) H D W Code Package/ No. of pieces Internal cable container for structure 36 DIN mod - W=800mm > Rapid selection table page 4/4 1600 195 200 VC1622 1/1 1800 195 200 VC1822 1/1 2000 195 200 VC2022 1/1 > In-depth technical information page 6/1 4/22 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 VC..32 Floor-standing structures External cable container Can be mounted either on the right or left. PO..32 Dimensions (mm) H D W Code Package/ No. of pieces External cable container 1600 195 300 VC1632 1/1 1800 195 300 VC1832 1/1 2000 195 300 VC2032 1/1 4 The additional cable container can be completed in the following ways: - IP65 version with external, internal door (optional). - IP31 version with internal door and finishing section (see page 4/26) IP31 internal door for external cable container Dimensions (mm) H W Code Package/ No. of pieces 1600 300 PO1631 1/1 1800 300 PO1831 1/1 2000 300 PO2031 1/1 IP65 side panels for structures and additional cable container Dimensions (mm) Description > Rapid selection table page 4/4 H D Code Package/ No. of pieces No.2 side panels 1400 195 LF1425 1/2 No.2 side panels 1600 195 LF1625 1/2 No.2 side panels 1800 195 LF1825 1/2 No.2 side panels 2000 195 LF2025 1/2 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/23 ArTu M monobloc structures Ordering codes Wall-mounted/Floor-standing structures 600 IP65 front glass doors for structures PV6060 PV8060 PV1060 PV1260 Glass door 24/36 mod. Door made of 15/10 thick steel sheet with 4 mm thick safety glass fitted with polyurethane gasket complete with handle with key with double tab. Reversible, can be hinged on the right or left. Dimensions (mm) H W Package/ No. of pieces Code Wall-mounted IP65 glass door - 24 DIN mod 4 600 800 PV1460 PV1660 PV1860 PV2060 PV1688 PV1888 PV2088 600 600 PV6060 1/1 800 600 PV8060 1/1 1000 600 PV1060 1/1 1200 600 PV1260 1/1 Floor-standing IP65 glass door - 24 DIN mod 1400 600 PV1460 1/1 1600 600 PV1660 1/1 1800 600 PV1860 1/1 2000 600 PV2060 1/1 Floor-standing IP65 glass door - 36 DIN mod 1600 800 PV1688 1/1 1800 800 PV1888 1/1 2000 800 PV2088 1/1 Floor-standing IP65 glass door - external cable container 800 1600 300 PV1680 1/1 1800 300 PV1880 1/1 2000 300 PV2080 1/1 200 600 600 600 PV1680 PV1880 PV2080 > Rapid selection table page 4/4 600 800 1000 1200 800 600 200 1400 1600 1800 2000 > In-depth technical information page 6/1 4/24 1STC008001D0204 | ABB Technical catalogue 800 > Overall dimensions page 7/1 Wall-mounted/Floor-standing structures 600 IP65 front blind doors for structures PO0660 PO0860 PO1060 PO1260 Blind door 24/36 mod. Door made of 15/10 thick steel sheet with 4 mm thick safety glass fitted with polyurethane gasket complete with handle with key with double tab. Reversible, can be hinged on the right or left. Dimensions (mm) H W Package/ No. of pieces Code Wall-mounted IP65 glass door - 24 DIN mod 300 600 600 PO6060 1/1 800 600 PO8060 1/1 1000 600 PO1060 1/1 1200 600 PO1260 1/1 4 Floor-standing IP65 glass door - 24 DIN mod PC1402 PC1602 PC1802 PC2002 1400 600 PO1460 1/1 1600 600 PO1660 1/1 1800 600 PO1860 1/1 2000 600 PO2060 1/1 Floor-standing IP65 glass door - 36 DIN mod 1600 800 PO1680 1/1 1800 800 PO1880 1/1 2000 800 PO2080 1/1 Floor-standing IP65 glass door - external cable container 600 800 PO1460 PO1660 PO1860 PO2060 PO1680 PO1880 PO2080 > Rapid selection table page 4/4 1600 300 PO1630 1/1 1800 300 PO1830 1/1 2000 300 PO2030 1/1 300 600 600 800 1000 1200 1600 1800 2000 > In-depth technical information page 6/1 600 1400 1600 1800 2000 800 1600 1800 2000 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/25 ArTu M monobloc structures Ordering codes Wall-mounted/Floor-standing structures IP3031 IP3160 IP3181 IP3201 IP 31 Finishing section For IP31 version switchgear (without door), use the special finishing kits already sized for the standard heights and widths of ArTu switchgear. In the case of switchgear placed side by side, use the special double IP31 kit on the joining uprights. Vertical sections Dimensions (mm) H Code Package/ No. of pieces No.2 IP31 vertical finishing sections 1400 IP3140 1/2 No.2 IP31 vertical finishing sections 1600 IP3142 1/2 No.2 IP31 vertical finishing sections 1800 IP3160 1/2 No.2 IP31 vertical finishing sections 2000 IP3162 1/2 No.1 IP31double vertical finishing section 1400 IP3181 1/1 No.1 IP31double vertical finishing section 1600 IP3183 1/1 No.1 IP31double vertical finishing section 1800 IP3201 1/1 No.1 IP31double vertical finishing section 2000 IP3203 1/1 Description 4 IP3061 IP3081 Horizontal sections Dimensions (mm) IP3142 IP3162 IP3183 IP3203 > Rapid selection table page 4/4 Description L Code Package/ No. of pieces No.2 IP31 horizontal finishing sections 600 IP3061 1/2 No.2 IP31 horizontal finishing sections 800 IP3081 1/2 No.2 IP31 horizontal finishing sections 300 IP3031 1/2 IP3140 IP3160 IP3181 IP3201 > In-depth technical information page 6/1 4/26 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Kit for apparatus Panels for square measuring instruments Steel sheet panels complete with hinges placed on the right or left. Dimensions (mm) Description H W Package/ No. of pieces Code 24 DIN mod - W=600mm Panel for 2 instruments 72x72mm PS2720 1/1 Panel for 2 instruments 72x72mm PS2960 1/1 PS4720 1/1 PS4960 1/1 Panel for 2 instruments 72x72mm PS2728 1/1 Panel for 2 instruments 72x72mm PS2968 1/1 PS4728 1/1 PS4968 1/1 Panel for 4 instruments 72x72mm 200 600 Panel for 4 instruments 96x96mm 4 36 DIN mod - W=800mm Panel for 4 instruments 72x72mm 200 800 Panel for 4 instruments 96x96mm Leght 600/800mm PS4720/PS4728/PS4960/PS4968 PS2720/PS2728/PS2960/PS2968 68 92 68 92 68 92 199 68 199 92 596/796 596/796 Accessories for panels EV1135 EV1136 LU CI M A ZZ GA INO Description Code Package/ No. of pieces No. 10 holes covers W=2000mm grey RAL 7035 colour AD1086 1/10 AD1600 AD1800 No. 3 holes covers 36 Din modules grey RAL 7035 colour AD1088 1/3 AD1086 AD1088 AD1089 No. 3 holes covers 36 Din modules grey RAL 7035 colour AD1089 1/3 No. 10 closing caps for instrument panel 72x72mm EV1135 1/10 AD1101÷AD1104 No. 5 closing caps for instrument panel 96x96mm EV1136 1/5 No. 20 label-holders 12 DIN mod. AD1390 1/20 No. 20 label-holders 24 DIN mod. AD1600 1/20 No. 20 label-holders 36 DIN mod. AD1800 1/20 No. 288 labels 1 mod. 15x17mm (HxW) AD1101 (1) 1/288 No. 192 labels 2 mod. 15x27mm (HxW) AD1102 (1) 1/192 No. 96 labels 3 mod. 15x50mm (HxW) AD1103 (1) 1/96 No. 96 labels 4 mod. 15x67mm (HxW) AD1104 (1) 1/96 (1) > Rapid selection table page 4/4 Labels can be written with Grafoplast compatible plotter system. > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/27 ArTu M monobloc structures Ordering codes Kit for apparatus 200 GD6002 GD8002 300 150 DIN rail kits for System Pro-M modular apparatus, Tmax T1-T2-T3-XT1-XT3 moulded-case circuit-breakers and supports for Unifix H DIN rail kit Dimensions (mm) GD6008 GD6009 200 Description W Code Package/ No. of pieces GD6002 1/1 GD6008 1/1 24 DIN mod W=600mm 4 GD6010 GD8010 DIN rail kit (aluminium) 300 DIN rail kit centre dist. 150mm (2 DIN rows) 600 DIN rail kit reinforced for Tmax RC AD1061 GD6010 DIN rail kit with accessories GC6002 1/1 (1) 1/1 36 DIN mod W=800mm DIN rail kit (aluminium) DIN rail kit centre dist. 150mm (2 DIN rows) 800 GD8002 1/1 GD6009 1/1 DIN rail kit reinforced for Tmax RC GD8010 1/1 DIN rail kit with accessories GC8002 (1) 1/1 (1) Din rail kit with accessories includes 60x80 wiring duct and related AD1037 fixing supports. Supports for Unifix H Dimensions (mm) > Rapid selection table page 4/4 Description H Code Package/ No. of pieces Fixing supports for Unifix H series for panel H=300mm 600/800 AD1061 1/1 > In-depth technical information page 6/1 4/28 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Kit for apparatus Modular panels Steel sheet panels complete with hinges placed on the right or left Dimensions (mm) Description H W Code Package/ No. of pieces 24 DIN mod W=600mm Modular panel 1 DIN row 200 PM2624 1/1 Modular panel 1 DIN row - Tmax RC 300 PM2312 1/1 Modular panel 1 DIN row only for Unifix H 300 PM3624 1/1 Modular panel 2 DIN rows interaxis 150mm 300 PM3648 1/1 Modular panel 3 DIN rows 600 PM6672 1/1 Modular panel 1 DIN row 200 PM2836 1/1 Modular panel 1 DIN row - Tmax RC 300 PM2315 1/1 Modular panel 1 DIN row only for Unifix H 300 PM3836 1/1 Modular panel 2 DIN rows interaxis 150mm 300 PM3872 1/1 600 4 36 DIN mod W=800mm 800 Width 600/800mm PM3648/PM3872 PM2624/PM2836 74,5 = 150 299 = 199 432/634 74,5 596/796 432/634 596/796 Version for Tmax with mod. diff. Version for Unifix H PM2312/PM2315 PM3624/PM3836 99.5 = 299 299 199.5 = 432/634 432/634 596/796 596/796 Width 600mm PM6672 99,5 200 599 200 99,5 432 596 > Rapid selection table page 4/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/29 ArTu M monobloc structures Ordering codes 05087 (60x80) AD1009 Kit for apparatus Supports for duct Code Package/ No. of pieces No.4 plastic supports for horizontal duct AD1009 1/4 No.4 metal supports for horizontal duct AD1037 1/4 05087(60x80) Description GD6002 GD8002 OFF OFF OFF 4 05087 (60x80) OFF OFF OFF OFF OFF OFF GD6008 GD6009 OFF OFF OFF OFF OFF Depth adapters Enables the depth of miniature circuit-breakers to be adapted to that of moulded-case circuit-breakers mounted on the same DIN rail. 05085(40x80) OFF OFF Dimensions (mm) OFF OFF Description W Code Package/ No. of pieces No.1 depth adapter for Tmax T1-T2-T3 floor-standing 600 AP6000 1/1 No.1 depth adapter for Tmax T1-T2-T3 wall-mounting 600 AP6001 1/1 OFF OFF OFF OFF OFF OFF OFF 05087(60x80) AD1037 OFF OFF OFF AP6001 AP6000 GD6002 GD8002 Blind back plates for and general apparatus Dimensions (mm) PF.... Description W Package/ No. of pieces H Code 200 PF2610(1) (1) 24 DIN mod W=600mm Blind back plate FR.... Blind back plate 1/1 1/1 400 PF4610 200 FR2601 1/1 400 FR4601 1/1 Blind back plate 200 PF2810 1/1 Blind back plate 400 PF4810 1/1 200 FR2801 1/1 400 FR4801 1/1 Recessed blind back plate 600 Recessed blind back plate 36 DIN mod W=800mm Recessed blind back plate Recessed blind back plate (1) > Rapid selection table page 4/4 800 Also for wall-mounted ArTu M version D=200mm.The panels must be ordered separately. > In-depth technical information page 6/1 4/30 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Kit for apparatus Blind, recessed and ventilated panels for and general apparatus PC.... Dimensions (mm) Description W H Code Package/ No. of pieces 24 DIN mod W=600mm PR.... PA.... Blind panel 100 PC1600 1/1 Blind panel 200 PC2600 1/1 Blind panel 300 PC3600 1/1 Blind panel 400 PC4600 1/1 Blind panel 600 PC6600 1/1 Blind panel 800 PC8600 1/1 Blind panel (Inner door) 1600 PC1660 1/1 Blind panel (Inner door) 600 1800 PC1860 1/1 Blind panel (Inner door) 2000 PC2060 1/1 Blind recessed panel 200 PR2600 1/1 PC1660 PC1860 PC2060 Blind recessed panel 400 PR4600 1/1 Blind recessed panel 600 PR6600 1/1 PC1680 PC1880 PC2080 Ventilated panel 100 PA1600 1/1 Ventilated panel 200 PA2600 1/1 4 36 DIN mod W=800mm Blind panel 100 PC1800 1/1 Blind panel 200 PC2800 1/1 Blind panel 300 PC3800 1/1 Blind panel 400 PC4800 1/1 Blind panel 600 PC6800 1/1 Blind panel 800 PC8800 1/1 1600 PC1680 1/1 Blind panel (Inner door) 1800 PC1880 1/1 Blind panel (Inner door) 2000 PC2080 1/1 Blind recessed panel 200 PR2800 1/1 Blind recessed panel 400 PR4800 1/1 Blind recessed panel 600 PR6800 1/1 Blind panel (Inner door) > Rapid selection table page 4/4 > In-depth technical information page 6/1 800 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/31 ArTu M monobloc structures Ordering codes Kit for apparatus Kits for installing Tmax circuit-breakers Horizontal installation (front terminal) Dimensions (mm) Description H W Package/ No. of pieces Code 24 DIN mod. - W=600mm 4 Kit for T1 3-4 poles fixed 200 KT1117 1/1 Kit for T1 4 poles fixed + RC mod. 200 KT1102 1/1 Kit for T2 3-4 poles fixed 200 KT2117 1/1 Kit for T2 4 poles fixed + RC mod. 200 KT2102 1/1 Kit for T3 3-4 poles fixed 200 KT3112 1/1 Kit for T3 4 poles fixed + RC mod. 300 KT3102 1/1 Kit for T3 3-4 poles fixed 200 KT3118(1) 1/1 Kit for T4 3-4 poles fixed 200 KT4112 1/1 Kit for T4 4 poles fixed + RC mod. 200 KT4110 1/1 Kit for T4 3-4 poles fixed 300 Kit for T5 4 poles fixed + RC mod. 300 600 KT5112 1/1 KT5110 1/1 1/1 Kit for T6 3-4 poles fixed 500 KT6113 Kit XT1 3-4 poles fixed 200 KX1617(2) 1/1 Kit XT1 4 poles fixed + RC mod. 200 KX1602 1/1 Kit XT2 3-4 poles fixed 200 KX2619(2) 1/1 Kit XT2 4 poles fixed + RC mod. 200 KX2602 1/1 Kit XT3 3-4 poles fixed 200 KX3612(2) 1/1 Kit XT3 3-4 poles fixed 200 KX3618(1) (2) 1/1 Kit XT3 4 poles fixed + RC mod. 300 KX3602 1/1 Kit XT4 3-4 poles fixed 200 KX4612(2) 1/1 Kit XT4 4 poles fixed + RC mod. 200 KX4610 1/1 36 DIN mod. - W=800mm Kit for T2 4 poles fixed + RC mod. 200 KL2103 1/1 Kit for T3 3-4 poles fixed 200 KL3113 1/1 Kit for T3 4 poles fixed + RC mod. 300 KL3103 1/1 Kit for T4 3-4 poles fixed 200 KL4115 1/1 Kit for T4 4 poles fixed + RC mod. 200 Kit for T4 3-4 poles fixed 300 KL4116 1/1 KL5114 1/1 1/1 Kit for T5 4 poles fixed + RC mod. 300 KL5116 Kit for T6 3-4 poles fixed 500 KL6113(2) 1/1 Kit XT3 3-4 poles fixed 200 KL3613 1/1 Kit XT3 4 poles fixed + RC mod. 300 KX3603 Kit XT4 3-4 poles fixed > Rapid selection table page 4/4 800 200 KX4615 1/1 (2) 1/1 (1) Kit for wall ArTu M D=200mm. (2) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for platemounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for platemounting, AD3308 XT4 3P Flange for plate-mounting. > In-depth technical information page 6/1 4/32 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Kit for apparatus Kits for installing Tmax circuit-breakers Vertical installation (front terminal) Dimensions (mm) Description KT.... KL.... GD.... H W Code Package/ No. of pieces 24 DIN mod. - W=600mm Kit on DIN rail for T1-T2-T3-XT1-XT3 3-4 poles fixed/RC. 200÷600 GD....(1) 1/1 Kit for T3 3-4 poles fixed 300 KT3212 1/1 Kit for T4 3-4 poles fixed 400 KT4212 1/1 Kit for T4 4 poles fixed + RC mod. 500 KT4102 1/1 Kit for T5 3-4 poles fixed 400 KT5212 1/1 Kit for T5 4 poles fixed + RC mod. 500 KT5102 1/1 KT6213 1/1 Kit for T6 3-4 poles fixed 500 Kit XT1 3-4 poles fixed 200 Kit XT1 4 poles fixed + RC mod. KX1618(4) 1/1 300 KX1603 1/1 Kit XT1 N 3 CBs side by side 200 KX1604(4) 1/1 Kit XT1 N 3/4(3) CBs side by side 200 KX2604(2) 1/1 Kit XT3 3/4 poles fixed 300 (4) KX3614 1/1 Kit XT3 4 poles fixed + RC mod 300 KX3609 1/1 Kit XT4 3/4 poles fixed 300 KX4614(4) 1/1 Kit XT4 N 3/4(3) CBs side by side 300 KX4604(2) 1/1 Kit XT4 4 poles fixed + RC mod. 400 KX4602 1/1 600 4 36 DIN mod. - W=800mm Vertical Kit for T5 3-4 poles fixed 400 Kit for T5 4 poles fixed + RC mod. 500 Kit for T6 3-4 poles fixed 500 800 KL5212 1/1 KL5102 1/1 KL6213 1/1 (1) For the selection of kit for installation on DIN rail, see page 4/28 (2) Order AD3310, AD3311, AD3312, AD3313 polished flange, see page 4/7. (3) No. 4 CBs side by side 3P, No. 3 CBs side by side 4P. (4) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for platemounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for platemounting, AD3308 XT4 3P Flange for plate-mounting. Kit for OT200÷400 Dimensions (mm) H W Control Code Package/ No. of pieces Kit for OT200/250/315/400 - horizontal installation 300 600 Decentralized KO2260 1/1 Kit for OT200/250/315/400 - vertical installation 300 600 Decentralized KO2261 1/1 Kit for OT200/250/315/400 - horizontal installation 300 800 Decentralized KO2280 1/1 Kit for OT200/250/315/400 - vertical installation 300 800 Decentralized KO2281 1/1 Description 24 DIN mod. - W=600mm Horizontal > Rapid selection table page 4/4 36 DIN mod. - W=800mm > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/33 ArTu M monobloc structures Ordering codes BA0400 Distribution system Distribution busbars with shaped section BA0800 4 PB0802 Dimensions (mm) Description W Code Package/ No. of pieces Busbar In=400A 1730 BA0400 1/1 Busbar In=800A 1730 BA0800 1/1 Busbar holders for busbars with shaped section Description Code Package/ No. of pieces PB0802 1/1 PB0803 1/1 Scaled PB0803 Scaled busbar holder In=800A - 35kA Linear Linear busbar holder In=800A - 35kA Joints for busbars with shaped section AD1068 Description Code Package/ No. of pieces No.4 copper 400A branch joints AD1077 1/4 No.4 joints for joining busbars with shaped section 400/800A AD1068 1/4 AD1077 Hammer seal screws for busbars with shaped section 20 AD1056 27 AD1064 Description Code Package/ No. of pieces No.12 M8 screws L=20mm for cable terminal AD1056 1/12 No.12 M8 screws L=20mm for flat busbars up to 10mm, complete with screw-covering cap AD1064 1/12 Resting bases for busbars with shaped section AD1065 > Rapid selection table page 4/4 Description Code Package/ No. of pieces No.4 resting bases for 400/800A busbars AD1065 1/4 > In-depth technical information page 6/1 4/34 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Distribution system Pic.1 Crosspieces for busbars with shaped section 400/800A TR3001 TV6200 TV8200 Mounting Pic. Description Code Package/ No. of pieces Busbars vertically on back of structure No.2 crosspieces structure W=600mm with PB0803 1 TV6200 1/2 No.2 crosspieces structure W=800mm with PB0803 1 TV8200 1/2 Busbars vertically on back of structure of external cable container No.2 crosspieces back of cable container W=300mm with PB0802 1 4 TR3001 1/2 2 TV2000 1/2 No.2 structure crosspieces W=600mm with PB0803 3 TV6200 1/2 No.2 structure crosspieces W=800mm with PB0803 3 TV8200 1/2 Busbars vertically in internal cable container No.2 internal cable container crosspieces W=200mm with PB0802 Pic.2 Connection to Unifix H system TV2000 Pic.3 TV6200 TV8200 > Rapid selection table page 4/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/35 ArTu M monobloc structures Ordering codes BR0250 Distribution system BR0400 Flat busbar Copper busbars 1750mm in length drilled. Can be used both with linear BP0630 and scaled BP0634 busbar holders. BR0630 Dimensions In (mm) W (A) Description No.2 copper busbars 15x5 No.2 copper busbars 25x5 1750 No.2 copper busbars 30x10 4 Code Package/ No. of pieces 250 BR0250 1/2 400 BR0400 1/2 630 BR0630 1/2 BP0630 BP0632 Busbar holders Busbar holders in insulating self-extinguishing material, certified in conformity with the EN 60439-1 Standard for an Icc≤35kA Pic.1 Description Code Package/ No. of pieces No.2 linear busbar holders In=630A - 32kA BP0630 1/1 No.2 terminal covers for linear busbar holders BP0630 BP0632 1/1 Code Package/ No. of pieces Crosspieces for flat busbars Mounting Pic. Description Busbar vertically on back of structure or of cable container TV6200 TV8200 No.2 crosspieces back of structure W=600mm with BP4466 1 TV6200 1/2 No.2 crosspieces back of structure W=800mm with BP4466 1 TV8200 1/2 No.2 crosspieces back of cable container W=300mm with BP4466 or scaled BP4477 2 TV8200 1/2 BP0632 Pic.2 TR3001 > Rapid selection table page 4/4 > In-depth technical information page 6/1 4/36 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Distribution system Flexible busbars Flexible busbars insulated in self-extinguishing material Dimensions In (mm) W (A) Description Package/ No. of pieces Code No.2 flexible busbars, section 20x3 250 BF1602 1/2 No.2 flexible busbars, section 20x5 400 BF2502 1/2 500 BF4002 1/2 630 BF4012 (1) 1/2 No.2 flexible busbars, section 24x6 2000 No.2 flexible busbars, section 32x5 (1) 4 Only for circuit-breakers with front extended terminals or rear terminals. EV1119 Earthing busbars EV1120 Copper busbars drilled and threaded for rapid connection of the conductors. EV1121 Dimensions (mm) W Description Package/ No. of pieces Code No.2 earthing busbars 20x5 threaded M6 EV1119 1/2 No.2 earthing busbars 25x5 threaded M6 2000 EV1120 1/2 No.2 earthing busbars 50x5 threaded M6 EV1121 1/2 Insulators and copper busbars for neutral/earthing > Rapid selection table page 4/4 Description Code Package/ No. of pieces No.50 hexagonal insulators 30x30mm M6 EV1122 1/50 No.50 hexagonal insulators 30x30mm M8 EV1123 1/50 No.25 hexagonal insulators 36x50mm M6 EV1124 1/25 No.25 hexagonal insulators 36x50mm M8 EV1125 1/25 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/37 ArTu M monobloc structures Ordering codes Distribution system 600 800 Unifix H AD1061 ED2183 ED2191 Dimensions (mm) W Code Package/ No. of pieces Frame with 24 DIN module busbar 600 ED2183 1/1 Frame with 36 DIN module busbar 800 ED2191 1/1 AD1061 1/2 ED2209 1/1 Basic module for DIN L1-N top 16A ED2894 1/1 Basic module for DIN L1-L2 top 16A ED2902 1/1 Description Frames for Tmax No.2 fixing brackets onto structure for ED2183 o ED2091 Feeder modules 4 ED2209 4P 400A feeder module (for ED2183-ED2191) Basic modules In 16A ED2894 ED2902 ED2910 ED2928 Basic module for DIN L1-N bottom 16A ED2910 1/1 Basic module for DIN L1-L2 bottom 16A ED2928 1/1 Basic module L1/Neutral top 40A ED2654 1/1 Basic module L2/Neutral top 40A ED2662 1/1 Basic module L3/Neutral top 40A ED2670 1/1 Basic modules In 40A ED2654 ED2662 ED2670 Basic modules In 63A Basic module L1 top 63A ED2531 1/1 ED0004 Basic module L2 top 63A ED2549 1/1 ED2531-ED2549 ED2564-ED2556 Basic module L3 top 63A ED2556 1/1 Basic module Neutral top 63A ED2564 1/1 Basic module L1 bottom 63A ED2572 1/1 Basic module L2 bottom 63A ED2590 1/1 Basic module L3 bottom 63A ED2598 1/1 Basic module Neutral bottom 63A ED2606 1/1 Basic module with cable L1 top 100A ED2720 1/1 Basic module with cable L2 top 100A ED2738 1/1 Basic module with cable L3 top 100A ED2746 1/1 Basic module with cable Neutral top 100A ED2753 1/1 ED2720-ED2738 ED2746-ED2753 ED2551-ED2552 ED2553-ED2554 Basic modules In 100A Basic modules ≤ In 40A S800 ED2845 ED2550 Basic module L1 top ≤40A ED2557 1/1 Basic module L2 top ≤40A ED2558 1/1 Basic module L3 top ≤40A ED2559 1/1 Basic module Neutral top ≤40A ED2560 1/1 Basic modules ≤ In 125A S800 ED2572-ED2590 ED2598-ED2506 > Rapid selection table page 4/4 Basic module L1 top 125A ED2551 1/1 Basic module L2 top 125A ED2552 1/1 Basic module L3 top 125A ED2553 1/1 Basic module Neutral bottom 125A ED2554 1/1 Basic module false pole W=27mm ED2550 1/1 > In-depth technical information page 6/1 4/38 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Distribution system ED2217-ED2225 ED2233-ED2241 ED2258-ED2266 ED2274-ED2282 ED2332-ED2340 ED2357-ED2365 Unifix H Code Package/ No. of pieces Basic module L1 top L2 bottom ED2217 1/1 Basic module L2 top L1 bottom ED2225 1/1 Basic module L3 top N bottom ED2233 1/1 Basic module N top L3 bottom ED2241 1/1 Basic module false pole for residual current release RC221 ED2373 1/1 Basic module false pole for solenoid operator ED2381 1/1 Basic module L1 top L2 bottom ED2258 1/1 Basic module L2 top L1 bottom ED2266 1/1 Basic module L3 top N bottom ED2274 1/1 Basic module N top L3 bottom ED2282 1/1 Basic module false pole for residual current release RC221 ED2373 1/1 Basic module false pole for solenoid operator ED2399 1/1 Basic module L1 top ED2290 1/1 Basic module L2 top ED2308 1/1 Basic module L3 top ED2316 1/1 Basic module N top ED2324 1/1 Basic module L1 bottom ED2332 1/1 Basic module L2 bottom ED2340 1/1 Basic module L3 bottom ED2357 1/1 Basic module N bottom ED2365 1/1 Basic module false pole for residual current release RC221 ED2373 1/1 Basic module false pole for DDA ED2845 1/1 Basic module false pole for modular MDRC ED2852 1/1 No.2 IP20 covers (for ED2183-ED2191) W=173mm (10 DIN modules) ED2407 1/2 No.6 duct supports 40x60mm (only for modular apparatus) ED2936 1/6 ArTu M Kit for ED2183 and ED2191 PM3624 1/1 Modular front panel 300x600mm (HxW) PM3836 1/1 No.10 terminal covers T1 ED0001 1/10 No.10 terminal covers T2 ED0002 1/10 No.10 terminal covers T3 ED0003 1/10 No.10 terminal covers S200/F200 ED0004 1/10 Description Basic modules ≤ In 160A Tmax T1, Tmax XT1 ED0001 ED0002 ED0003 ED2290-ED2308 ED2316-ED2324 4 Basic modules ≤ In 160A Tmax T2 Basic modules ≤ In 250A Tmax T3, Tmax XT3 ED2373 ED2381 ED2399 ED2407 PM3624 PM3836 ED2936 Accessories Modular front panel 300x800mm (HxW) > Rapid selection table page 4/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/39 ArTu M monobloc structures Ordering codes Distribution system 600 800 ED2961 ED2962 ED…. GD6002 GD8002 PM2624 PM2836 4 Unifix L Dimensions W (mm) Description Code Package/ No. of pieces 2-poles busbars 100A 2P 8 module busbar 200 ED2985 1/6 100A 2P 12 module busbar 400 ED2993 1/6 100A 2P 18 module busbar 450 ED3009 1/6 100A 2P 24 module busbar 600 ED3017 1/6 100A 2P 36 module busbar 800 ED3025 1/6 100A 4P 12 module busbar 400 ED2944 1/6 100A 4P 18 module busbar 450 ED2951 1/6 100A 4P 24 module busbar 600 ED2969 1/6 100A 4P 36 module busbar 800 ED2977 1/6 4-poles busbars 2 poles 4 poles N L1 L2 L3 N L1 Connections for various apparatus ED3066 ED3033 ED3041 ED3058 Connection with 2 conductors L/N 16A ED3108 1/6 Connection with 3 conductors L1/L2/L3 16A ED3116 1/6 Connection with 4 conductors L1/L2/L3/N 16A single phase ED3124 1/6 Connection with 2 conductors L1/N 40A ED3355 1/6 Connection with 3 conductors L1/L2/L3 40A ED3363 1/6 Connection with 4 conductors L1/L2/L3/N 40A ED3371 1/6 No.10 connections L1-N 40 A ED3272 1/10 No.10 connections L2-N 40 A ED3280 1/10 No.10 connections L3-N 40 A ED3298 1/10 No.10 connections L 1 100A ED3033 1/10 No.10 connections L 2 100A ED3041 1/10 No.10 connections L 3 100A ED3058 1/10 No.10 connections N 100A ED3066 1/10 Feeder with 4P 100A cable (W=350mm) ED3132 1/10 Feeder with 4P 100A cable (W=1500mm) ED0026 1/10 Feeder with 4P 100A cable (W=2500mm) ED0025 1/10 Parallel module 2P 100A with cable (W=600mm) ED3082 1/6 Parallel module 4P 100A with cable (W=400mm) ED3405 1/6 Parallel module 4P 100A with cable (W=600mm) ED3090 1/6 Parallel module 4P 100A with cable (W=800mm) ED3413 1/6 Parallel module 4P 100A with cable (W=1500mm) ED3439 1/6 No.10 single-pole power supply terminals L1 ED3101 1/10 No.10 single-pole power supply terminals L2 ED3102 1/10 No.10 single-pole power supply terminals L3 ED3103 1/10 No.10 single-pole power supply terminals N ED3104 1/10 No.10 busbar covers (W=600mm) ED2961 1/10 No.2 busbar covers (W=800mm) ED2962 1/2 DIN rail Kit and supports (W=600mm) GD1520 1/1 DIN rail Kit and supports (W=800mm) GD1530 1/1 Modular front panel 200x600mm (HxW) PM2624 1/1 Modular front panel 200x800mm (HxW) PM2836 1/1 Connections for apparatus ED3104 ED3101 ED3102 ED3103 Power supply modules with cable Power supply modules without cable In 100A 400 350 600 1500 800 2500 1500 Accessories ED3090 ED3405 ED3413 ED3439 ED3132 ED0026 ED0025 > Rapid selection table page 4/4 ED3124 > In-depth technical information page 6/1 4/40 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Accessories Kits for placing structures side by side The ArTu M switchgear can be placed side by side laterally. The IP65 side-by-side kit consists of a set of supports and a gasket for keeping the degree of protection. In the IP31 version, in addition to kit AD1012, order the double finishing section (see table on page 4/26). AD1012 Description Code Package/ No. of pieces Kit for laterally placing structures side by side H=1400-1600-1800-2000mm AD1012 1/1 4 AA1206 Brackets for wall fixinge These allow ArTu M switchgear to be fixed to the wall. Description Code Package/ No. of pieces No. 4 wall fixing brackets AA1206 1/4 Lifting eyebolts These allow cabled switchgear to be lifted. They are made of steel treated withwhite passivated galvanisation. SA1350 Description Code Package/ No. of pieces No. 2 steel M12 lifting eyebolts AA9600 1/2 AA9600 Lifting reinforcements Allow several pieces of ArTu M switchgear to be handled side by side. Description Code No.2 lifting reinforcements for side-by-side structures SA1350 > Rapid selection table page 4/4 > In-depth technical information page 6/1 Package/ No. of pieces 1/2 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/41 ArTu M monobloc structures Ordering codes Pic.1 Pic.2 300 Accessories Crosspieces for accessories 250 Can be mounted on the structure to anchor the cables or to mount accessories. The crosspieces for accessories can be mounted on the side, on the rear or in the cable container of the structure. Mounting Pic. Code Package/ No. of pieces No. 2 Structure lateral crosspieces D=250mm 1 TR2001 1/2 No. 2 External cable container rear crosspieces W=300mm 2 TR3001 1/2 No. 2 Internal cable container crosspieces W=200mm 3 TV2000 1/2 Description 4 TR2001 Pic.3 TR3001 200 TR2000 Horizontal shelf Non-supporting horizontal shelf which allows separations to be made inside floormounted ArTu M switchgear. In structure with W=800 with internal cable container, use SH6001. Dimensions (mm) Description W Code Package/ No. of pieces 600 SH6001 1/1 600 SH8001 1/1 24 DIN mod Horizontal shelf for structure 36 DIN mod Horizontal shelf for structure Diagram pocket The diagram pocket (made of plastic RAL 2004 colour, dim. HxW 237x265mm type A4) is applied inside the blind doors/panels of suitable dimensions, using the adhesive provided. > Rapid selection table page 4/4 Description Code Package/ No. of pieces Plastic diagram pocket AA5600 1/1 > In-depth technical information page 6/1 4/42 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 AD1054 Accessories AD1041 Supports for terminal boxes Description Package/ No. of pieces Code Structure AD1041 No. 2 supports for horizontal 45° angled terminal box AD1041 1/2 No. 2 supports for horizontal terminal box AD1054 1/2 AD1044 1/4 Internal cable container No.4 supports for vertical terminal box 4 Additional cable container No. 4 supports for vertical terminal box in internal/ additional cable container AD1044 AD1055 1/4 AD1055 Angled supports for terminal boxes and earthing busbars EV1110 EV1112 EV1119 TS4013 TS4011 TS4012 TS4000 TS4001 TS4002 TS4003 > Rapid selection table page 4/4 Description Code Package/ No. of pieces No.50 angled supports 1 row of terminals EV1110 1/50 No.10 angled supports 1 row of terminals EV2110 1/10 No.50 angled supports 1 row of terminals + earth EV1112 1/50 No.10 angled supports 1 row of terminals + earth EV2112 1/10 No.2 angled supports 1 row of terminals + earth EV1113 1/2 Sections for accessories Description Dimensions (mm) W Code Package/ No. of pieces No.2 sections EN50024 C30 2000 TS4011 1/2 No.2 sections EN50035 G32 2000 TS4012 1/2 No.2 DIN sections EN50022 2000 TS4013 1/2 No.2 cable rails 600 TS4000 1/2 No.2 cable rails 800 TS4001 1/2 No.2 cable rails 1000 TS4002 1/2 No.2 cable rails 1200 TS4003 1/2 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/43 ArTu M monobloc structures Ordering codes Accessories Dividers Code Package/ No. of pieces Modular 125A AD1076 (1) 1/1 Modular 125A AD1080 (2) 1/1 Modular 175A AD1007 (1) 1/1 Modular 175A AD1081 (2) 1/1 Modular 250A AD1030 1/1 Modular 125A AD1031 1/1 Modular 125A AD1075 1/1 Modular 175A AD1006 1/1 Modular 125A AD1004 1/1 Modular 125A-medium-93x89x48 (HxWxD) AD1028 1/1 Modular 125A-large-96x126x48 (HxWxD) AD1029 1/1 Modular 160A AD1027 1/1 Horizontal 250A for structures W=600mm AD1034 1/1 Horizontal 250A for structures W=800mm AD1053 1/1 Description Code Package/ No. of pieces Supports for fixing to the structure for AD1034 and AD1053 AD1038 1/1 Connection accessory between two AD1080 AD1083 1/1 Description AD1080 AD1081 AD1030 AD1031 4 AD1075 AD1006 AD1004 Single-pole Three-pole Four-pole AD1028 AD1029 AD1027 AD1035 AD1034 AD1053 (1) 10 outputs - (2) 6 outputs Amounting accessories > Rapid selection table page 4/4 > In-depth technical information page 6/1 4/44 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Accessories Marking N 3 400 VOLT EV1090 EV1091 EV1092 EV1093 EV1050 Description Code Package/ No. of pieces No.490 adhesive labels ø12mm symbol N EV1150 1/490 No.490 adhesive labels ø12mm symbol L1 EV1151 1/490 No.490 adhesive labels ø12mm symbol L2 EV1152 1/490 No.490 adhesive labels ø12mm symbol L3 EV1153 1/490 No.490 adhesive labels ø12mm symbol T EV1154 1/490 No.10 triangular adhesive labels 125mm with 400V lightning arrow symbol EV1155 1/10 No.100 triangular adhesive labels 20mm with lightning arrow symbol EV1156 1/300 4 Brackets for anchoring cables Adjustable cable blocking bracket can be mounted on sections with 10mm slot EV1050. Description Code Package/ No. of pieces No.10 cable blocking brackets min÷max ø 9÷16mm EV1090 1/10 No.10 cable blocking brackets min÷max ø 16÷30mm EV1091 1/10 No.5 cable blocking brackets min÷max ø 30÷48mm EV1092 1/5 No.5 cable blocking brackets min÷max ø 48÷72mm EV1093 1/5 Aluminium sliding guides for universal uses EV1051 EV1056 EV1058 EV1050 > Rapid selection table page 4/4 Description Code Package/ No. of pieces No.10 aluminium supporting sections 30x15 – W=2000mm EV1050 1/10 No.25 fixing brackets for EV1050 EV1051 1/25 No.100 aluminium M6 nuts for EV1050 EV1056 1/100 No.100 aluminium M8 nuts for EV1050 EV1058 1/100 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/45 ArTu M monobloc structures Ordering codes Accessories Inserts and keys AA1560 AA6120 AA6200 Code Package/ No. of pieces Box + Yale insert (without tab) EV1008 1/1 Insert + Yale key for EV1008 EV1036 1/1 Ronis 455 insert + key for EV1008 EV1037 1/1 3mm double-tab insert + key for EV1008 EV1039 1/1 Description Wall-mounted structures and cable container EV1008 AA6140 4 Floor-mounted structures AA1570 AA6160 AA1560 > Rapid selection table page 4/4 Double-tab insert AA6100 1/1 Double-tab Zn+Al+Mg alloy key AD1058 1/1 Yale insert + key AA6200 1/1 Male 6.4 triangular insert on ø 7.6 AA6120 1/1 Triangular key AA1560 1/1 Male 7square type insert; key not available AA6140 1/1 Hexagonal 8 type insert embedded; key not available AA6180 1/1 FIST type insert (FIAT) AA6160 1/1 Fiat key AA1570 1/1 Ronis E739 insert + key AA8004 1/1 > In-depth technical information page 6/1 4/46 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 Accessories Spare parts ZD2625 ZD2825 ZD2325 > Rapid selection table page 4/4 Description Code Package/ No. of pieces No.10 hinges + screws for panels (spare part ACP468) AD1090 1/10 No.10 plug + door key kits (spare part APT002) AD1091 1/10 Chimes for door H=1400mm (spare part) CA1401 1/1 Chimes for door H=1600mm (spare part) CA1600 1/1 Chimes for door H=1800mm (spare part) CA1800 1/1 Chimes for door H=2000mm (spare part) CA2000 1/1 No.50 three-lobed M6 spare screws AD1033 1/50 RAL 7035 colour spray paint for touching up (400 ml spray can) VB7035 1/1 “ArTu Survival Kit” - Accessories and small items for spare parts PV4060 1/1 Glass door for switchgear for operating theatres PO6069 1/1 Blind door for switchgear for operating theatres AD1022 1/1 ArTu handle complete with lock and cover AD1070 1/10 No.10 Artu handle covers AZ4000 1/4 No.4 base strip angle pieces H=100mm ZD2625 1/1 Base strip consisting of 4 angle pieces and 4 flanges ZD2825 1/1 Base strip consisting of 4 angle pieces and 4 flanges ZD2325 1/1 Base strip consisting of 4 angle pieces and 4 flanges AD1036 1/20 RAL 7035 colour spray paint for touching up (400 ml spray can) VB7035 1/1 Polished flange for XT1 3P mounted on DIN rail AD3301 1/1 Polished flange for XT1 4P mounted on DIN rail AD3302 1/1 Polished flange for XT3 3P mounted on DIN rail AD3303 1/1 Polished flange for XT3 4P mounted on DIN rail AD3304 1/1 > In-depth technical information page 6/1 4 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/47 ArTu M monobloc structures Examples of configurations ArTu 4 T T T T T T ArTu M Series dim. 1100x600x200 (1130x700x200)mm (external hxwxd) IP65 with modular panels Code Description Q.ty SM1069 ArTu M structure 1000x600x200mm (hxwxd) QSO + acc. 1 ArTu T T T T T T T T T ArTu M Series dim. 600x600x150 (700x700x150) mm (external hxwxd) IP65 with modular panels Code Description Q.ty SM6061 ArTu M structure 600x600x150mm (hxwxd) 1 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 3 PV6060 Glass door 600x600mm (hxw) M 1 AA1206 N °4 wall fixing brackets M 1 ArTu T T T T T T T T T T T T ArTu M Series dim. 800x600x150 (900x700x150) mm (external hxwxd) IP65 with modular panels Code Description Q.ty SM8061 ArTu M structure 800x600x150mm (hxwxd) 1 PM2624 Panel 24 mod.200x600mm (hxw) M, K 1 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 4 PV8060 Glass door 800x600mm (hxw) M 1 AA1206 N °4 wall fixing brackets M 1 > Rapid selection table page 4/4 > In-depth technical information page 6/1 4/48 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T Terminal boxes 4 ArTu M Series dim. 800x600x200 (900x700x200) mm (external hxwxd) IP65 with modular panels Code Description Q.ty SM8062 ArTu M structure 800x600x200mm (hxwxd) 1 PC2600 Panel 24 mod.200x600mm (hxw) M, K 1 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 3 PV8060 Glass door 800x600mm (hxw) M 1 AA1206 N °4 wall fixing brackets M 1 ArTu T T T T T T T T T T T T Terminal boxes ArTu M Series dim. 1000x600x200 (1000x700x200) mm (external hxwxd) IP65 with modular panels Code Description Q.ty SM1062 ArTu M structure 1000x600x200mm (hxwxd) 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PM2624 Panel 24 mod.200x600mm (hxw) M, K 1 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 4 PV1060 Glass door 1000x600mm (hxw) M 1 AA1206 N °4 wall fixing brackets M 1 > Rapid selection table page 4/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/49 ArTu M monobloc structures Examples of configurations ArTu T T T T T T T T T T T T Terminal boxes 4 ArTu M Series dim. 1200x600x200 (1300x700x200) mm (external hxwxd) IP65 with modular panels Code Description Q.ty SM1262 ArTu M structure 1200x600x200mm (hxwxd) 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PM2624 Panel 24 mod.200x600mm (hxw) M, K 2 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 5 PV1260 Glass door 1200x600mm (hxw) M 1 AA1206 N °4 wall fixing brackets M 1 ArTu T T T T T T T T T Terminal boxes Terminal boxes ArTu M Series dim. 1200x600x200 (1300x700x200) mm (external hxwxd) IP65 with modular panels Code Description Q.ty SM1262 ArTu M structure 1200x600x200mm (hxwxd) 1 PC2600 Blind panel 200x600mm (hxw) M, K 2 PM2624 Panel 24 mod.200x600mm (hxw) M, K 4 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 4 PV1260 Glass door 1200x600mm (hxw) M 1 AA1206 N °4 wall fixing brackets M 1 > Rapid selection table page 4/4 > In-depth technical information page 6/1 4/50 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T Terminal boxes 4 ArTu M Series dim. 1400x600x250 (1596x724x250) mm (external hxwxd) IP65 with modular panels Code Description Q.ty SM1462 ArTu M structure 1400x600x250mm (hxwxd) 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PM2624 Panel 24 mod.200x600mm (hxw) M, K 2 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 5 PV1460 Glass door 1400x600mm (hxw) M 1 LF1425 No. 2 side panels 1400x250mm (hxd) M 1 AA1206 N °4 wall fixing brackets M 1 ArTu T T T T T T T T T T T T T T T Terminal boxes ArTu M Series dim. 1600x600x250 (1796x724x250) mm (external hxwxd) IP65 with modular panels Code Description Q.ty SM1662 ArTu M structure 1600x600x250mm (hxwxd) 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PM6672 Panel 72 mod.600x600mm (hxw) M, K 2 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 6 PV1660 Glass door 1600x600mm (hxw) M 1 LF1625 No. 2 side panels 1600x250mm (hxd) M 1 AA1206 N °4 wall fixing brackets M 1 > Rapid selection table page 4/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/51 ArTu M monobloc structures Examples of configurations ArTu T T T T T T T T T T T T T T T Terminal boxes 4 ArTu M Series dim. 1600x800x250 (1796x924x250) mm (external hxwxd) IP65 with modular panels Code Description Q.ty SM1682 ArTu M structure 1600x800x250mm (hxwxd) 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PM6672 72 mod. Panel 600x600mm (hxw) M, K 2 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 6 PV1680 Glass door 1600x800mm (hxl) M 1 VC1622 Internal cable container 1600x200x250mm M 1 LF1625 No.2 side panels 1600x250mm (hxd) M 1 AA1206 N °4 wall fixing brackets M 1 > Rapid selection table page 4/4 > In-depth technical information page 6/1 4/52 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T T T T Terminal boxes 4 ArTu M Series dim. 1600x800x250 (1796x924x250) mm (external hxwxd) IP65 with plate for Tmax T5 and modular panels Code Description Q.ty SM1682 ArTu M structure 1600x800x250mm (hxwxd) 1 PC2800 Blind panel 200x800mm (hxw) M, K 1 PC3800 Blind panel 300x800mm (hxw) M, K 1 KL5114 T5 horiz. fixed kit 300x800mm (hxw), M, K 1 PM2836 Panel 36 mod.200x800mm (hxw) M, K 4 GD8002 DIN rail kit not segregated 36 mod. w=800mm, K 4 PV1688 Glass door 36 mod. 1600x800mm (hxw) M 1 LF1625 No. 2 side panels 1600x250mm (hxd) M 1 AA1206 N °4 wall fixing brackets M 1 > Rapid selection table page 4/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/53 ArTu M monobloc structures Examples of configurations ArTu T T T T T T T T T T T T Terminal boxes 4 ArTu M Series dim. 1800x600x250 (1996x724x250) mm (external hxwxd) IP65 with plate for Tmax T3-XT3 and modular panels, complete with 400A vertical busbars on back of structure - max. Icw 35kA Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit SM1862 ArTu M structure 1800x600x250mm (hxwxd) 1 SM1862 ArTu M structure 1800x600x250mm (hxwxd) 1 KT3112 T3 3/4P horiz. fixed kit not segregated M, K250 1 KX3612 XT3 3/4P horiz. fixed kit not segregated M, K250 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PM2624 Panel 24 mod.200x600mm (hxw) M, K 2 PM2624 Panel 24 mod.200x600mm (hxw) M, K 2 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 5 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 5 PV1860 Glass door 1800x600mm (hxw) M 1 PV1860 Glass door 1800x600mm (hxw) M 1 LF1825 No. 2 side panels 1800x250mm (hxd) M 1 LF1825 No. 2 side panels 1800x250mm (hxd) M 1 AA1206 N °4 wall fixing brackets M 1 AA1206 N °4 wall fixing brackets M 1 PB0803 Linear busbar holder In=800A (35kA) 5 PB0803 Linear busbar holder In=800A (35kA) 5 BA0400 Busbar In=400A 4 BA0400 Busbar In=400A 4 TV6200 No. 2 rear crosspieces w=600mm 3 TV6200 No. 2 rear crosspieces w=600mm 3 AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1 AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1 > Rapid selection table page 4/4 > In-depth technical information page 6/1 4/54 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T Terminal boxes 4 ArTu M Series dim. 1800x800x250 (1996x924x250) mm (external hxwxd) IP65 with plate for Tmax T3-XT3 and modular panels, complete with 800A vertical busbars on back of internal cable container - max. Icw 35kA Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit SM1882 ArTu M structure 1800x800x250mm (hxwxd) 1 SM1882 ArTu M structure 1800x800x250mm (hxwxd) 1 KT3112 T3 3/4P horiz. fixed kit not segregated M, K250 1 KX3612 XT3 3/4P horiz. fixed kit not segregated M, K250 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PM2624 Panel 24 mod.200x600mm (hxw) M, K 2 PM2624 Panel 24 mod.200x600mm (hxw) M, K 2 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 5 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 5 PV1880 Glass door 1800x800mm (hxw) M 1 PV1880 Glass door 1800x800mm (hxw) M 1 LF1825 No. 2 side panels 1800x250mm (hxd) M 1 LF1825 No. 2 side panels 1800x250mm (hxd) M 1 VC1822 Int. cable container 1800x200x250mm M 1 VC1822 Int. cable container 1800x200x250mm M 1 AA1206 N °4 wall fixing brackets M 1 AA1206 N °4 wall fixing brackets M 1 PB0802 Scaled busbar holder In=800A (35kA) 5 PB0802 Scaled busbar holder In=800A (35kA) 5 BA0800 Busbar In=800A 4 BA0800 Busbar In=800A 4 TV2000 No. 2 rear crosspieces w=200mm 3 TV2000 No. 2 rear crosspieces w=200mm 3 AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1 AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1 > Rapid selection table page 4/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/55 ArTu M monobloc structures Examples of configurations ArTu T T T T T T T T T T T T T T T T T T T T Terminal boxes 4 ArTu M Series dim. 1800x800x250 (1996x924x250) mm (external hxwxd) IP65 with plate for Tmax T3-XT3 and modular panels, complete with 800A vertical busbars on back of structure - max. Icw 35kA Code Description Q.ty Code SM1882 ArTu M structure 1800x800x250mm (hxwxd) 1 SM1882 ArTu M structure 1800x800x250mm (hxwxd) 1 PC2800 Blind panel 200x800mm (hxw) M, K 1 PC2800 Blind panel 200x800mm (hxw) M, K 1 PC4800 Blind panel 400x800mm (hxw) M, K 1 PC4800 Blind panel 400x800mm (hxw) M, K 1 KL3113 T3 3/4P horiz. fixed kit not segregated M, K250 1 KL3613 XT3 3/4P horiz. fixed kit not segregated M, K250 1 PM2836 Panel 36 mod.200x800mm (hxw) M, K 5 PM2836 Panel 36 mod.200x800mm (hxw) M, K 5 GD8002 DIN rail kit not segregated 36 mod. w=800mm, K 5 GD8002 DIN rail kit not segregated 36 mod. w=800mm, K 5 PV1888 Glass door 36 mod. 1800x800mm (hxw) M 1 PV1888 Glass door 36 mod. 1800x800mm (hxw) M 1 LF1825 No. 2 side panels 1800x250mm (hxd) M 1 LF1825 No. 2 side panels 1800x250mm (hxd) M 1 AA1206 N °4 wall fixing brackets M 1 AA1206 N °4 wall fixing brackets M 1 PB0803 Linear busbar holder In=800A (35kA) 5 PB0803 Linear busbar holder In=800A (35kA) 5 BA0800 Busbar In=800A 4 BA0800 Busbar In=800A 4 TV8200 No. 2 rear crosspieces w=800mm 3 TV8200 No. 2 rear crosspieces w=800mm 3 AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1 AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1 Tmax T kit Description Q.ty Tmax XT kit > Rapid selection table page 4/4 > In-depth technical information page 6/1 4/56 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T T T T Terminal boxes 4 ArTu M Series dim. 2000x600x250 (2196x724x250) mm (external hxwxd) IP65 with plate for Tmax T5 and modular panels, complete with 400A vertical busbars on back of structure - max. Icw 35kA Code Description Q.ty SM2062 ArTu M structure 2000x600x250mm (hxwxd) 1 KT5112 T5 horiz. fixed kit 300x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC3600 Blind panel 300x600mm (hxw) M, K 1 PM2624 Panel 24 mod.200x600mm (hxw) M, K 3 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 6 PV2060 Glass door 2000x600mm (hxw) M 1 LF2025 No. 2 side panels 2000x250mm (hxd) M 1 AA1206 N °4 wall fixing brackets M 1 PB0803 Linear busbar holder In=800A (35kA) 5 BA0800 Busbar In=800A 4 TV6200 No. 2 rear crosspieces w=600mm 3 AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1 > Rapid selection table page 4/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/57 ArTu M monobloc structures Examples of configurations ArTu T T T T T T T T T T T T T T T Terminal boxes 4 ArTu M Series dim. 2000x800x250 (2196x924x250) mm (external hxwxd) IP65 with plate for Tmax T5 and modular panels, complete with 800A vertical busbars on back of internal cable container - max. Icw 35kA Code Description Q.ty SM2082 ArTu M structure 2000x800x250mm (hxwxd)\ 1 KT5112 T5 horiz. fixed kit 300x800mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC3600 Blind panel 300x600mm (hxw) M, K 1 PM2624 Panel 24 mod.200x600mm (hxw) M, K 3 PM6672 Panel 72 mod.600x600mm (hxw) M, K 1 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 6 PV2080 Glass door 2000x800mm (hxw) M 1 LF2025 No. 2 side panels 2000x250mm (hxd) M 1 VC2022 Int. cable container 2000x200x250mm M 1 AA1206 N °4 wall fixing brackets M 1 PB0802 Scaled busbar holder In=800A (35kA) 5 BA0800 Busbar In=800A 4 TV2000 No. 2 rear crosspieces w=200mm 3 AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1 > Rapid selection table page 4/4 > In-depth technical information page 6/1 4/58 1STC008001D0204 | ABB Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T T T T T T T T T T T T T T Terminal boxes 4 ArTu M Series dim. 2000x800x250 (2196x924x250)mm (external hxwxd) IP65 with plate for Tmax T5 and modular panels, complete with 800A vertical busbars on back of structure- max. Icw 35kA Code Description Q.ty SM2082 ArTu M structure 2000x800x250mm (hxwxd) 1 PC2800 Blind panel 200x800mm (hxw) M, K 1 PC3800 Blind panel 300x800mm (hxw) M, K 1 KL5114 T5 horiz. fixed kit 300x800mm (hxw) M, K 1 PM2836 Panel 36 mod.200x800mm (hxw) M, K 6 GD8002 DIN rail kit not segregated 36 mod. w=800mm, K 6 PV2088 Glass door 36 mod. 2000x800mm (hxw) M 1 LF2025 No. 2 side panels 2000x250mm (hxd) M 1 AA1206 N °4 wall fixing brackets M 1 PB0803 Linear busbar holder In=800A (35kA) 5 BA0800 Busbar In=800A 4 TV8200 No. 2 rear crosspieces w=800mm 3 AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1 > Rapid selection table page 4/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 4/59 ArTu K Modular Structures General 5/2 Selection of the structure 5/6 Kit for installing apparatus 5/16 Distribution systems 5/40 Ordering Code 5/53 Examples of configurations 5/108 5 Technical catalogue | 1STC008001D0204 5/1 ArTu K Modular Structures General The structure is made entirely of hot galvanised steel sheet, which guarantees the equipotentiality of the switchgear. 5 The K series of ArTu switchgear consists of a series of components for configuration of floor-standing kit switchgear, with the following dimensions: - three heights (useful) 1600 mm (16 modules of 100 mm), 1800 mm (18 modules of 100 mm) and 2000 mm (20 modules of 100 mm) to which the h=100mm base strip measurement fitted with removable flanges must always be added; - four widths (useful) 390mm (12 DIN modules), 600 mm (24 DIN modules), 800 mm (36 or 24 DIN) and 1000 mm (48 or 36 DIN modules + cable riser); 5/2 1STC008001D0204 | Technical catalogue - six depths (useful) 150 mm (for Tmax T6 up to fixed 630A S6) 225mm (for Tmax up to fixed 800A S6), 300mm (for Tmax T7 1600A), 500 mm (for Tmax to fixed T71600A), 700mm (for Emax up to withdrawable E3 3200A) and 900mm (for Emax up to withdrawable E6 6300A). Tmax XT series can be installed in each one of the above-mentioned depths. The structure is made entirely of hot galvanised steel sheet, which guarantees the equipotentiality of the switchgear. Base and top are supplied pre-mounted by means of a three-way joint, which is able to provide considerable structural rigidity. Base and top The ArTu switchgear doors are made of 15/10 steel sheet for blind versions or with 4 mm thick glass fitted with gasket able to grant IP65 degree of protection. are supplied pre-mounted by means of a three-way joint, which is able to provide considerable structural rigidity. The base is fitted with removable flanges which allow entry into the areas reserved for the cables and a pre-mounted (H=100mm) base strip, consisting of four angle irons with removable over the whole perimeter. The four uprights are fitted with a multi-purpose hinge used to assemble the door and to couple the structures, both laterally and at the rear. The structure is completed with two types of functional frames, fitted with reference nicks (at 100 mm pitch) to avoid annoying measurements during assembly of the apparatus kits: - open functional frame (can be used in switchgear where no form of segregation is required); - closed functional frame (can be used in switchgear where forms 2-3 and 4 segregation are required). 600 800 1000 1600 - 1800 - 2000 390 The switchgear is completed with: - blind (IP65) and ventilated (IP41) type side panels; - blind and transparent doors, fitted with safety glass which can be mounted on all sides (IP65). - kit for installing the apparatus, designed to integrate enclosure structures and circuit-breaker perfectly . The mounting positions are established previously so as to guarantee the insulation distances and perfect alignment of the apparatus on the front panel. Furthermore, the kit plates are of the self-centring type and are fitted with threaded bushings to provide easy assembly of the apparatus from the front. - DIN rail kit consisting of a drawn piece of aluminium able to resist the load of the circuit-breakers fitted with fixing brackets Technical catalogue | 1STC008001D0204 5/3 5 ArTu K Modular Structures General Additional structure 300mm wide are available, which can be used as cable containers placed side by side laterally with all the ArTu K switchgear. 5 (patented), preset to house the vertical and horizontal cabling duct. The aluminium DIN rail has three established mounting positions, corresponding respectively to the, T and XT series depths of the System Pro M, Tmax and Isomax circuit-breakers. It is fitted with double DIN 35 section (front and rear), and the rear part can be used to support the duct, up to 60x80mm; - kit for air circuit-breakers consisting of sturdy supporting crosspieces and of the front panel; - universal kits, consisting of back plates and blind front panels, which allow assembly of generic apparatus. The panels have vertical 100mm modularity and are fitted with an invisible hinge on the outside, which can be mounted either on the 5/4 1STC008001D0204 | Technical catalogue right or on the left, and which guarantees panel earthing, making the equipotential connection superfluous. The DIN panels are also available in the versions for one, two or three rows, corresponding to heights of 200, 300 and 600mm respectively and can have 150/200mm centre distance between the rows. In the case of modular and moulded-case circuit-breakers placed side by side in the same row, the special section must be used which allows the assembly position of the circuit-breakers to be adapted correctly so that the same modular panel can be used. When the circuit-breakers do not take up the whole window of the panel, the spaces can be closed using the hole covers. Within the K series of ArTu switchgear with 500, 700 and 900mm Within the K series of ArTu switchgear with 500, 700 and 900mm depths, segregation compartments of Form 2, 3 and 4 can be made in conformity with the IEC 60439-1 Standard. depths, segregation compartments of Form 2, 3 and 4 can be made in conformity with the IEC 60439-1 Standard, for the whole range of moulded-case circuit-breakers with rear terminals, simply by using the closed functional frame, the installation kits in the segregated version and the special segregations. The extremely compact dimensions of the system allow the busbars to be mounted directly inside the switchgear, positioning them horizontally or vertically, on the back or on the side of the structure, keeping front access, also thanks to the practicality of the scaled type busbar holder. The distribution systems, which can be used inside the ArTu switchgear, consist of: - shaped section busbars up to 3200A; - flat busbars up to 6300A; - flexible busbars; - Unifix cabling system, structured up to 400A; - dividers up to 400A. 5 The extremely compact dimensions of the system allow the busbars to be mounted directly inside the switchgear, positioning them horizontally or vertically, on the back or on the side of the structure. The panels have vertical 100mm modularity and are fitted with an invisible hinge on the outside, which can be mounted either on the right or on the left, and which guarantees panel earthing, making the equipotential connection superfluous. Technical characteristics Compliance with Standards CEI EN 60439-1/IEC 61439-1-2 Test of vibration for structure ArTu K Test of antiseismic according to IEC 60068-2-57 Standard according to IEE Std 693 Standard Rated service voltage Ue up to 1000 V Rated insulation voltage Ui up to 1000 V Rated frequency 50-60 Hz Rated impulse withstand voltage Uimp 8 kV Rated current In up to 6300 A Rated short-time short-circuit withstand current Icw up to 105 kA Rated peak short-circuit current Ipk up to 254 kA Degree of protection IP 31 without door 41 without door with accessories 65 with door up to 4000A 41 with door up to 6300A Technical catalogue | 1STC008001D0204 5/5 ArTu K Modular Structures Selection of the structure Rapid selection tables 12 mod. 24 mod. 36 mod. 24 mod. 48 mod. 36 mod. (W) W (D) D 200 300 (H) H 100 100 Structure hight 1600/1800mm 5 No. mod. vert.mod H=100mm 16 No. DIN modules instailable External overall dimensions (1) DIN panel 150mm centre dist. DIN panel 200mm centre dist. (H) mm 240 (24x10) 192 (24x8) 360 (36x10) 236 (36x8) 144 (12x12) 288 (24x12) 1831 108 (12x9) 216 (24x9) 18 2031 432 (36x12) 324 (36x9) 432 (48x9) (W) mm 748 948 Base Top Side flangers Base strip base strip Functional dimensions (2) (D) (3) mm H mm 287 1600 W mm 600 800 D (3) mm 150 To be ordered separately SK6025 ZD1015 SK8025 ZD1015 538 362 390 225 SK4040 ZD1025 538 437 390 300 SK4050 ZD1030 538 637 390 500 SK4060 ZD1050 538 837 390 700 SK4080 ZD1070 538 1037 390 900 SK4010 ZD1090 748 287 600 150 SK6025 ZD1015 748 362 600 225 SK6040 ZD1025 748 437 600 300 SK6050 ZD1030 748 637 600 500 SK6060 ZD1050 748 837 600 700 SK6080 ZD1070 1800 748 1037 600 900 SK6010 ZD1090 948 287 800 150 SK8025 ZD1015 948 362 800 225 SK8040 ZD1025 948 437 800 300 SK8050 ZD1030 948 637 800 500 SK8060 ZD1050 948 837 800 700 SK8080 ZD1070 948 1037 800 900 SK8010 ZD1090 1148 1037 1000 900 SK1010 ZD1090 (1) The overall external dimensions of the ArTu K switchgear include the base strip h=100mm and the side panels, each 14mm wide. (2) The functional dimensions represent the useful space for installing the apparatus. (3) In this catalogue, reference is always made to the following depths: functional 150/225/300/500/700/900 mm external 287/362/437/637/837/1037 mm. (4) Upright SK1600 SK1800 The VC.... code is already complete with the functional frame, therefore it is not necessary to order other open or closed functional frames. Furthermore, the internal cable container is only built with 800/1000mm wide structures The rear intermediate upright SK2080 (H=2000mm) in switchgear without segregation must be ordered separately if necessary for fixing onto the back of crosspieces, accessories, busbars, etc The positioning of two structures or a structure and a cable container side-by-side is realized by the AD1014 kit. When selecting the components, the characteristics of the apparatus to be mounted inside the switchgear must be taken into consideration, opting for the open frame and cable container when no form of segregation is required and, on the contrary, for the closed frame and cable container when forms of segregation from 2 to 4 are required. According to the type of covering selected, the degree of protection varies from IP31/41 (switchgear without front door) to IP65 (switchgear with front door and blind side panels). The functional frames of ArTu K switchgear are available in two versions: - switchgear without segregation (open frame) in cases where no form of segregation is required; - segregated switchgear (closed frame) in cases where forms 2-3 and 4 segregation are required > Selection by components page 5/53 > In-depth technical information page 6/1 5/6 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 12/24/36 mod. SK1880 SK2080 (to be ordered separately) Reduced frames 24 mod. 12/24/36 mod. 5 Functional frames switchgear without segregation Functional frames for segregated switchgear Solution 1 Open frame Solution 2 Open frame Solution 3 (4) Internal cable container Solution 1 Closed frame Solution 2 (4) Internal cable container SK1604 (5) - - - - SK1604 (5) - VC1624 - SK1804 (6) SK1803 - (6) SK1803 SK1804 (6) SK1803 SK1804 (6) Side coverings front and rear coverings IP65 Side panel Glass door 12/24/36/48 mod. Glass door 24/36 mod. + int. cable cont. Blind door 12/24/36/48 mod. Rear panel LF1626 PV1661 - PO1661 RF1660 - LF1626 PV1682 PV1681 PO1681 RF1680 - - LF1840 PV1841 - PO1841 RF1840 - - - LF1850 PV1841 - PO1841 RF1840 - SK1802 - LF1860 PV1841 - PO1841 RF1840 SK1803 - SK1802 - LF1880 PV1841 - PO1841 RF1840 SK1804 (6) SK1803 - SK1802 - LF1810 PV1841 - PO1841 RF1840 SK1804 (5) - - - - LF1826 PV1861 - PO1861 RF1860 SK1804 (6) SK1803 - - - LF1840 PV1861 - PO1861 RF1860 SK1804 (6) SK1803 - - - LF1850 PV1861 - PO1861 RF1860 SK1804 (6) SK1803 - SK1802 - LF1860 PV1861 - PO1861 RF1860 SK1804 (6) SK1803 - SK1802 - LF1880 PV1861 - PO1861 RF1860 SK1804 (6) SK1803 - SK1802 - LF1810 PV1861 - PO1861 RF1860 SK1804 (5) - VC1824 - - LF1826 PV1882 PV1881 PO1881 RF1880 (6) SK1803 VC1824 - - LF1840 PV1882 PV1881 PO1881 RF1880 SK1804 (6) SK1803 VC1824 - - LF1850 PV1882 PV1881 PO1881 RF1880 SK1804 (6) SK1803 VC1823 SK1802 VC1820 LF1860 PV1882 PV1881 PO1881 RF1880 SK1804 (6) SK1803 VC1823 SK1802 VC1820 LF1880 PV1882 PV1881 PO1881 RF1880 SK1804 (6) SK1803 VC1823 SK1802 VC1820 LF1810 PV1882 PV1881 PO1881 RF1880 SK1804 (6) SK1803 VC1823 SK1802 VC1820 LF1810 PV1812 PV1811 PO1811 RF1810 SK1804 SK1804 (5) Reduced functional frame, only for fixed Tmax T and XT series breakers ≤T6 (6) With the reduced functional frame for fixed Tmax T and XT series circuit-breakers ≤ T6 or with standard functional frame for all the circuit-breakers. To complete the structure DIN rail and panels Tmax kits for ArTu reduced functional frame Tmax kits for ArTu standard functional frame P≥225mm Switchgears without segregation Page 5/16 Page 5/18 Page 5/20 Segregated switchgears Page 5/28 > Selection by components page 5/53 Distribution System Tmax kits for ArTu segregated functional Busbars with frame shaped section Flat busbars Page 5/42 Page 5/46 IP31/IP41 finishing section Page 5/59 Page 5/30 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/7 ArTu K Modular Structures Selection of the structure Rapid selection tables 12 mod. 24 mod. 36 mod. 24 mod. 48 mod. 36 mod. (W) W (D) D 200 300 (H) H 100 100 Structure hight 2000mm 5 No. mod. vert.mod H=100mm No. DIN modules instailable External overall dimensions (1) DIN panel 150mm centre dist. (H) mm 156 (12x13) 312 (24x13) DIN panel 200mm centre dist. 120 (12x10) 240 (24x10) 20 2231 468 (36x13) 360 (36x10) 480 (48x10) Base Top Base strip Functional dimensions (2) (W) mm (D) (3) mm 538 538 Side flangers base strip W mm D (3) mm 362 390 225 SK4040 ZD1025 437 390 300 SK4050 ZD1030 538 637 390 500 SK4060 ZD1050 538 837 390 700 SK4080 ZD1070 538 1037 390 900 SK4010 ZD1090 748 287 600 150 SK6025 ZD1015 748 362 600 225 SK6040 ZD1025 748 437 600 300 SK6050 ZD1030 748 637 600 500 SK6060 ZD1050 748 837 600 700 SK6080 ZD1070 748 1037 600 900 SK6010 ZD1090 948 287 800 150 SK8025 ZD1015 948 362 800 225 SK8040 ZD1025 948 437 800 300 SK8050 ZD1030 948 637 800 500 SK8060 ZD1050 948 837 800 700 SK8080 ZD1070 948 1037 800 900 SK8010 ZD1090 1148 1037 1000 900 SK1010 ZD1090 H mm 2000 (1) The overall external dimensions of the ArTu K switchgear include the base strip h=100mm and the side panels, each 14mm wide. (2) The functional dimensions represent the useful space for installing the apparatus. (3) In this catalogue, reference is always made to the following depths: functional 150/225/300/500/700/900 mm external 287/362/437/637/837/1037 mm. (4) Upright To be ordered separately SK2000 The VC.... code is already complete with the functional frame, therefore it is not necessary to order other open or closed functional frames. Furthermore, the internal cable container is only built with 800/1000mm wide structures The rear intermediate upright SK1880 (H=1800mm) in switchgear without segregation must be ordered separately if necessary for fixing onto the back of crosspieces, accessories, busbars, etc The positioning of two structures or a structure and a cable container side-by-side is realized by the AD1014 kit. When selecting the components, the characteristics of the apparatus to be mounted inside the switchgear must be taken into consideration, opting for the open frame and cable container when no form of segregation is required and, on the contrary, for the closed frame and cable container when forms of segregation from 2 to 4 are required. According to the type of covering selected, the degree of protection varies from IP31/41 (switchgear without front door) to IP65 (switchgear with front door and blind side panels). The functional frames of ArTu K switchgear are available in two versions: - switchgear without segregation (open frame) in cases where no form of segregation is required; - segregated switchgear (closed frame) in cases where forms 2-3 and 4 segregation are required > Selection by components page 5/53 > In-depth technical information page 6/1 5/8 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 12/24/36 mod. SK1880 SK2080 (to be ordered separately) Reduced frames 24 mod. 12/24/36 mod. 5 Functional frames switchgear without segregation Functional frames for segregated switchgear Solution 1 Open frame Solution 2 Open frame Solution 3 (4) Internal cable container Solution 1 Closed frame Solution 2 (4) Internal cable container SK2004 (6) SK2003 - - - Side coverings front and rear coverings IP65 Side panel Glass door 12/24/36/48 mod. Glass door 24/36 mod. + int. cable cont. Blind door 12/24/36/48 mod. Rear panel LF2040 PV2041 - PO2041 RF2040 SK2004 (6) SK2003 - - - LF2050 PV2041 - PO2041 RF2040 SK2004 (6) SK2003 - SK2002 - LF2060 PV2041 - PO2041 RF2040 SK2004 (6) SK2003 - SK2002 - LF2080 PV2041 - PO2041 RF2040 SK2004 (6) SK2003 - SK2002 - LF2010 PV2041 - PO2041 RF2040 - - - - LF2026 PV2061 - PO2061 RF2060 SK2004 (5) SK2004 (6) SK2003 - - - LF2040 PV2061 - PO2061 RF2060 SK2004 (6) SK2003 - - - LF2050 PV2061 - PO2061 RF2060 SK2004 (6) SK2003 - SK2002 - LF2060 PV2061 - PO2061 RF2060 SK2004 (6) SK2003 - SK2002 - LF2080 PV2061 - PO2061 RF2060 SK2004 (6) SK2003 - SK2002 - LF2010 PV2061 - PO2061 RF2060 - VC2024 - - LF2026 PV2082 PV2081 PO2081 RF2080 SK2004 (5) SK2004 (6) SK2003 VC2024 - - LF2040 PV2082 PV2081 PO2081 RF2080 SK2004 (6) SK2003 VC2024 - - LF2050 PV2082 PV2081 PO2081 RF2080 SK2004 (6) SK2003 VC2023 SK2002 VC2020 LF2060 PV2082 PV2081 PO2081 RF2080 SK2004 (6) SK2003 VC2023 SK2002 VC2020 LF2080 PV2082 PV2081 PO2081 RF2080 SK2004 (6) SK2003 VC2023 SK2002 VC2020 LF2010 PV2082 PV2081 PO2081 RF2080 SK2004 (6) SK2003 VC2023 SK2002 VC2020 LF2010 PV2012 PV2011 PO2011 RF2010 (5) Reduced functional frame, only for fixed Tmax T and XT series breakers ≤T6 (6) With the reduced functional frame for fixed Tmax T and XT series circuit-breakers ≤ T6 or with standard functional frame for all the circuit-breakers. To complete the structure DIN rail and panels Tmax kits for ArTu reduced functional frame Tmax kits for ArTu standard functional frame P≥225mm Switchgears without segregation Page 5/16 Page 5/18 Page 5/20 Segregated switchgears Page 5/28 > Selection by components page 5/53 Distribution System Tmax kits for ArTu segregated functional Busbars with frame shaped section Flat busbars Page 5/42 Page 5/46 IP31/IP41 finishing section Page 5/59 Page 5/30 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/9 ArTu K Modular Structures Selection of the structure Rapid selection tables (W) W (D) D (H) H Additional cable container 5 Overall external dimensions (1) (H) mm (W) mm 1831 448 2031 2231 448 448 Functional dimensions (2) (D) (3) mm H mm W mm 287 1600 300 Base/Top Base strip D (3) mm Side flanges for base strip Uprights Ordered separately Blind side door IP65 Internal front door IP31 External front door IP65 Rear panel IP65 LF1626 PO1631 PO1633 RF1630 PO1831 PO1833 RF1830 150 VC3025 ZD1015 287 150 VC3025 ZD1015 LF1826 362 225 VC3040 ZD1025 LF1840 437 300 VC3050 ZD1030 500 VC3060 ZD1050 837 700 VC3080 ZD1070 1037 900 VC3010 ZD1090 LF1810 287 150 VC3025 ZD1015 LF2026 362 225 VC3040 ZD1025 LF2040 437 300 VC3050 ZD1030 500 VC3060 ZD1050 837 700 VC3080 ZD1070 LF2080 1037 900 VC3010 ZD1090 LF2010 637 637 1800 2000 300 300 (1) The overall external dimensions of the ArTu K switchgear include the base strip h=100mm and the side panels, each 14mm wide. (2) The functional dimensions represent the useful space for installing the apparatus. SK1600 Side covers, front and rear covers SK1800 LF1850 LF1860 Finishing section IP31/41 LF1880 SK2000 (3) LF2050 LF2060 See page 5/59 PO2031 PO2033 RF2030 In this catalogue, reference is always made to depths 287/362/437/637/837/1037mm corresponding to overall external dimensions 150/225/300 500/700/900mm. Additional structure 300mm wide are available, which can be used as cable containers placed side by side laterally with all the ArTu K switchgear. In the same way as the structures, the additional cable container is made up of a base, top, base strip and uprights and is fixed to the structures using the side-byside kits (AD1014). It is completed with the side panels and the doors (to be ordered separately). The external doors are used on the additional cable container to be placed side by side with an ArTu structure with door (IP65); the internal doors are used on the additional cable container placed side by side with an ArTu IP31 version structure (i.e. without door and with finishing sections). This ensures uniformity of appearance between the structure and additional cable container. Furthermore, the internal doors can be used as internal segregations of the cable container: should a segregation with door open of the additional cable container be requested, it is possible to mount both the internal and external door at the same time. > Selection by components page 5/53 > In-depth technical information page 6/1 5/10 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 Rapid selection tables (W) (D) W D (H) H Angle square Overall external dimensions (1) (H) mm 2031 2231 Functional dimensions (2) (W) mm (D) (3) mm 637 637 837 837 1037 1037 637 637 837 837 1037 1037 H mm 1800 2000 5 Base/Top/ Base strip Uprights Side covers W mm D (3) mm 500 500 SK6600 700 700 SK8800 900 900 SK1100 LF1810 500 500 SK6600 LF2060 700 700 SK8800 900 900 SK1100 Blind side panel IP65 (1) The overall external dimensions of the ArTu K switchgear include the base strip h=100mm. (2) The functional dimensions represent the useful space for installing the apparatus. LF1860 SK1815 LF1880 SK2015 LF2080 LF2010 (3) In this catalogue reference isalways made to the following depth: functional 500/700mm external 637/837mm. Example of use LF.... > Selection by components page 5/53 > In-depth technical information page 6/1 To avoid problem in opening the switchgear, please do not mount the doors with the handles close together > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/11 ArTu K Modular Structures Selection of the structure Solutions recommended for installation of the apparatus Type of structure/installation Switchgear without segregation Moulded-case circuit-breakers Tmax T series D=150mm front terminals rear terminals 5 rear terminals rear terminals rear terminals fixed+mod.diff fixed plug-in rear terminals plug-in fixed plug-in fixed+diff. mod. plug-in withdrawable fixed plug-in withdrawable plug-in plug-in withdrawable fixed plug-in withdrawable front terminals fixed withdrawable rear terminals fixed withdrawable front terminals fixed withdrawable rear terminals fixed Tmax T6 Tmax T7 Tmax T8 fixed+diff. mod. Tmax T5 fixed fixed front terminals D=900mm fixed+diff. mod. Tmax T4 D=700mm fixed front terminals D=500mm fixed+diff. mod. Tmax T3 D=900mm fixed front terminals D=700mm fixed fixed+diff. mod. Tmax T2 D=500mm Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. fixed front terminals Segregated switchgear D=300mm Horiz. System Pro M modular apparatus Tmax T1 D=225mm withdrawable front terminals fixed rear terminals fixed > Selection by components page 5/53 > In-depth technical information page 6/1 5/12 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 Solutions recommended for installation of the apparatus Type of structure/installation Switchgear without segregation Moulded-case circuit-breakers Tmax XT series Tmax XT1 front terminals rear terminals front terminals Tmax XT2 rear terminals D=150mm D=225mm Segregated switchgear D=300mm D=500mm D=700mm D=900mm fixed fixed fixed plug-in front terminals fixed+diff. mod. rear terminals fixed rear terminals Tmax XT4 front terminals D=900mm plug-in fixed Tmax XT3 D=700mm Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. fixed+diff. mod. fixed D=500mm plug-in fixed fixed+diff. mod. fixed plug-in withdrawable D=500mm D=700mm D=900mm D=500mm 5 Type of structure/installation Switchgear without segregation D=150mm Air circuit-breakers Emax series Emax X1 Emax E1-E2-E3 front terminals rear terminals D=225mm Segregated switchgear D=300mm D=700mm D=900mm Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. fixed withdrawable fixed withdrawable fixed withdrawable Emax E4 rear terminals fixed full size withdrawable full size fixed Emax E6 rear terminals withdrawable front terminals fixed fixed Emax E1.2 rear terminals withdrawable fixed/interl. Emax E2.2 rear terminals withdr./interl. fixed/interl. Emax E4.2 rear terminals withdr./interl. fixed 50% Emax E6.2 rear terminals withdr. 50% (2) (2) (1) (2) (1) (1) (2) (1) (2) (2) Note: A 1600 A busbar system can only be installed in a D=300 mm structure in conjunction with the small-size frame. A standard frame must be used in the column with a 1600A main circuit-breaker. (1) Busbars system 3200A. (2) Busbars system 4000A. > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/13 ArTu K Modular Structures Selection of the structure Solutions recommended for installation of equipped apparatus Type of structure/installation Switchgear without segregation D=225mm Tmax moulded-case circuit-breakers interlocked, interlocked motor operated Tmax T1 front terminal Horiz. D=300mm Vertic. Horiz. Switchgear without segregation D=500mm Vertic. Horiz. D=700mm Vertic. Horiz. D=900mm Vertic. Horiz. fixed front terminal fixed rear terminal fixed fixed plug-in D=500mm Vertic. Horiz. D=700mm Vertic. Horiz. D=900mm Vertic. Horiz. Vertic. Tmax T2 front terminal fixed plug-in fixed plug-in Tmax T3 5 rear terminal front terminal fixed plug-in withdrawable Tmax T4 rear terminal withdrawable front terminal fixed plug-in withdrawable fixed plug-in withdrawable Tmax T5 rear terminal fixed front terminal withdrawable fixed withdrawable Tmax T6 rear terminal fixed front terminal withdrawable Tmax T7 fixed rear terminal withdrawable front terminal fixed rear terminal fixed front terminal fixed rear terminal fixed front terminal fixed rear terminal fixed Tmax XT1 Tmax XT2 Tmax XT3 > Selection by components page 5/53 > In-depth technical information page 6/1 5/14 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 Solutions recommended for installation of equipped apparatus Type of structure/installation Switchgear without segregation Tmax moulded-case circuit-breakers interlocked, interlocked motor operated front terminal Tmax T3 rear terminal front terminal Tmax T4 rear terminal front terminal Tmax T5 rear terminal front terminal Tmax T6 rear terminal front terminal Tmax T7 Tmax XT1 rear terminal D=225mm D=300mm D=500mm D=700mm D=900mm D=500mm D=700mm D=900mm Horiz. Horiz. Horiz. Horiz. Horiz. Horiz. Horiz. Horiz. Vertic. Vertic. withdrawable Vertic. Vertic. fixed plug-in fixed plug-in plug-in fixed plug-in withdrawable fixed Vertic. 5 fixed plug-in withdrawable fixed withdrawable fixed withdrawable withdrawable fixed withdrawable fixed rear terminal fixed front terminal fixed rear terminal fixed fixed plug-in fixed plug-in plug-in plug-in rear terminal Vertic. plug-in Tmax XT4 Vertic. plug-in front terminal front terminal Vertic. fixed plug-in Tmax XT3 Switchgear without segregation Note: A 1600 A busbar system can only be installed in a D=300 mm structure in conjunction with the small-size frame. A standard frame must be used in the column with a 1600 A main circuit-breaker. > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/15 ArTu K Modular Structures Selection of the structure System Pro M modular apparatus Tmax T1-T2-T3-XT1-XT3 moulded-case circuitbreakers, OT≤160 A and Unifix H supports GD6002 GD6008 GD6011 PM6672 GD8002 AD1086 PM2624 GD6009 PM2836 PM3648 GC6002 GD4002 PM3872 GC8002 PM2424 AD1600 W=390mm 5 DIN rail kit 12 DIN mod. W=600mm Panel 1 DIN row 12 DIN mod. H (mm) Standard version in aluminum 200 GD4002 PM2424 300 (1) 300 (2) GD6002 PM3424 DIN rail kit 24 DIN mod. W=800mm Panel 1 DIN row 24 DIN mod. W=1000mm Panel 1 DIN row 36 DIN mod. DIN rail kit 36 DIN mod. GD6002 PM2624 GD8002 PM2836 GD6002 PM2312 GD8002 PM2315 GD6008 600 Panel 3 DIN rows 72 DIN mod. Panel 2 DIN rows 48 DIN mod. PM3648 DIN rail kit 48 DIN mod. Panel 1 DIN row 48 DIN mod. GD1000 PM2010 PM3872 3x GD6002 PM6672 Equipped versions (complete with wiring duct 60x80 and AD1037 supports) 200 GC6002 PM2624 GD8002 PM2836 Reinforced version for Tmax and Tmax RC 222/1 residual current mod. 200mmm 200 PM2624 GD6010(2) GD8010 PM2836 Reinforced version for Tmax (2) and Tmax RC 222/1 300 (1) GD6010(2) PM2312 GD8010 PM2315 Unifix H fixing brackets 300 PM3624 AD1061 PM3836 AD1061 Panel 2 DIN rows 72 DIN mod. (1) Version for Tmax with differential module underplaced RC 221/222. (2) Only for System Pro M modular apparatus. Completion items for installation on DIN rail 05087 (60x80) 05087 (60x80) AD1037 OFF 05087 (60x80) OFF OFF OFF AD1009 OFF OFF OFF OFF OFF OFF OFF OFF AP6001 AP6000 05087 (60x80) OFF 05085 (40x80) OFF OFF OFF OFF OFF OFF GD6002 GD8002 OFF OFF OFF GD6002 GD8002 Supports for horizontal wiring duct Allows assembly of the cabling wiring duct horizontally up to 60x80mm. The AD1009 plastic model can be positioned on the rear of the DIN rail, whereas the AD1037 metal version is fixed onto the brackets of DIN rail GD6002/ GD8002, and allows adjustment of the wiring duct depth. Code AD1009 AD1037 Description Horizontal wiring duct (plastic) supports Horizontal wiring duct (metal) supports OFF OFF OFF OFF OFF OFF OFF OFF Polished flange for Tmax XT2-XT4 positioned side by side on plate Code AD3310 AD3311 AD3312 AD3313 Description AD3310 Polished flange for plate-mounted XT2 3P AD3311 Polished flange for plate-mounted XT2 4P AD3312 Polished flange for plate-mounted XT4 3P AD3313 Polished flange for plate-mounted XT4 4P Tmax XT2-XT4 on DIN rail cannot be mounted in ArTu switchboards. Depth adapter DIN window hole covers Code AP6000 Code AD1086 AD1088 AD1089 Description No.1 depth adapter for Tmax T1-T2-T3-XT1-XT3 W=600mm floor-standing > Selection by components page 5/53 > In-depth technical information page 6/1 5/16 1STC008001D0204 | Technical catalogue GD6008 GD6009 Description DIN L=2000mm hole cover strip - grey RAL 7035 DIN 24 modules hole cover strip - grey RAL 7035 DIN 36 modules hole cover strip - grey RAL 7035 > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with reduced frames Horizontal installation Fixed Circuit-breaker front terminals No. poles Dimensions 24 DIN mod. H (mm) W=600mm Tmax T1 3/4 200 Tmax T1 4 200 Tmax T2 3/4 200 Tmax T2 4 200 Tmax T3 3/4 200 Tmax T3 4 300 Tmax T4 3/4 200 Tmax T4 4 200 Tmax T5 3/4 300 KT3112 KL3113 KT4112 KL4115 KT5112 KL5114 KL6113 4 300 500 KT6113 Tmax XT1 3(2)/4 200 KX1617 Tmax XT1 4 200 Tmax XT2 3(2)/4 200 Tmax XT2 4 200 Tmax XT3 3(2)/4 200 4 300 200 Tmax XT4 4 200 5 KT2117 3/4 3(2)/4 36 DIN mod. W=800mm KT1102 (1) Tmax T5 Tmax XT3 24 DIN mod. W=600mm KT1117 Tmax T6 Tmax XT4 Fixed + RC mod. underneath 36 DIN mod. W=800mm KT2102 KL2103 KT3102 KL3103 KT4110 KL4116 KT5110 KL5116 KX1602 KX2619 KX2602 KX3612 KL3613 KX4612 KX4615 KX3602 KX3603 KX4610 Hole covering strip L =200mm AD1086, 24 DIN ,od. AD1088, 36 DIN mod. AD1089, RAL 7035 color. (1) Version for Tmax with differential module underplaced RC 221/222. (2) For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting - AD3308 XT4 3P Flange for plate-mounting. > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/17 ArTu K Modular Structures Selection of the structure STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with reduced frames Vertical installation Fixed Circuit-breaker front terminals 5 No. poles Tmax T1-T2-T3-XT1-XT3 on DIN rail 35 Dimensions H (mm) 24 DIN mod. W=600mm Fixed + RC mod. underneath 36 DIN mod. W=800mm 200 (see page 5/16) Tmax T3 3/4 300 KT3212 Tmax T4 3/4 400 KT4212 Tmax T4 4 500 Tmax T5 3/4 400 Tmax T5 4 500 Tmax T6 3/4 Tmax XT1 KL5212 500 KT6213 KL6213 3(1)/4 200 KX1618 Tmax XT1 4 300 Tmax XT1 No. 3 CBs side by side 3(1)/4 200 KX1604 Tmax XT2 No. 3/4(2) CBs side by side 3/4(3) 200 KX2604 (1) KX3614 Tmax XT3 3 /4 300 4 300 Tmax XT4 3(1)/4 300 Tmax XT4 4 400 Tmax XT4 No. 3/4(3) CBs side by side 3/4(3) 300 36 DIN mod. W=800mm KT4102 KT5212 Tmax XT3 24 DIN mod. W=600mm KT5102 KL5102 KX1603 KX3609 KX4614 KX4602 KX4604 Hole covering strip L =200mm AD1086, 24 DIN ,od. AD1088, 36 DIN mod. AD1089, RAL 7035 color. (1) For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting - AD3308 XT4 3P Flange for plate-mounting. (2) No. 4 CBs side by side 3P, No. 3 CBs side by side 4P. (3) Order AD3310, AD3311, AD3312, AD3313 polished flange, see page 5/107. Kit for OT160÷400 Dimensions (mm) Description Code H W Poles Maximum length handle Minimum length shaft Kit OT160/200/250/315/400 vertical KO2260 300 600 E03-04 Decentralized Control 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT160/200/250/315/400 horizontal KO2261 300 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT160/200/250/315/400 vertical KO2280 400 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT160/200/250/315/400 horizontal KO2281 600 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Apparatus of the OETL series up to 400A and OESA up to 160 A (in both cases not motor operated) can be installed inside the floor-mounted ArTu K switchgear. According to the dimensions of the apparatus, a plain back plate must be used (PF or FR…) and a panel (PC or PR…) of appropriate height and depth must be used. The useful space between panel and door is 50mm. For larger-sized handles, use plain recessed panels PR… (see dimensions in table). > Selection by components page 5/53 > In-depth technical information page 6/1 5/18 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with reduced frames Plain back plates, plain and ventilated panels Back plates 24 DIN mod. W=600mm Plain recessed 36 DIN mod. W=800mm 24 DIN mod. W=600mm Plain flat 36 DIN mod. W=800mm 100 200 PF2610 PF2810 FR2601 FR2801 300 400 PF4610 PA.... Panels Plain flat H (mm) PR.... PC.... FR.... PF.... PF4810 FR4601 FR4801 Plain recessed 24 DIN mod. W=600mm 36 DIN mod. W=800mm PC1600 PC1800 PC2600 PC2800 PC3600 PC3800 PC4600 24 DIN mod. W=600mm Ventilated 36 DIN mod. W=800mm PR2800 PC4800 PR4600 PR4800 PR6600 PR6800 600 PC6600 PC6800 PC8600 PC8800 1600 PC1660 PC1680 1800 PC1860 PC1880 2000 PC2060 PC2080 5 PA1600 PR2600 800 24 DIN mod. W=600mm PA2600 Can be used to mount all the non-modular apparatus. Useful internal space Minimum distance between back plate and busbar holder Flat plate Recessed plate Recessed plate Recessed panel Recessed panel Flat panel > Selection by components page 5/53 Flat panel > In-depth technical information page 6/1 Flat panel > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/19 ArTu K Modular Structures Selection of the structure STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frames D≥225mm Horizontal installation Fixed 5 Plug-in 12 mod. DIN W=390mm 12 mod. DIN W=390mm 24 mod. DIN W=600mm KT2421 KT2121 KT3421 KT3121 12 DIN mod. W=390mm 24 DIN mod. W=600mm Tmax T1 3/4 200 KT1411 KT1111 Tmax T1 4 200 Tmax T2 3/4 200 Tmax T2 4 200 Tmax T3 3/4 200 Tmax T3 4 300 Tmax T4 3/4 200 Tmax T4 3/4 300 Tmax T4 4 200 Tmax T5 (400A) 3/4 300 KT5411 KT5111 KL5115 KT5120 KT5130 Tmax T5 (630A) 3/4 300 KT5411 KT5111 KL5115 KT5121 KT5131 Tmax T5 4 300 Tmax T6 3/4 500 3/4 400 3/4 500 Tmax XT1 3(2)/4 200 Tmax XT1 4 200 Tmax XT2 3(2)/4 200 Tmax XT2 3(2)/4 300 Tmax XT2 4 200 Tmax XT2 4 300 (2) Tmax XT3 3 /4 200 Tmax XT3 4 300 Tmax XT4 3(2)/4 200 Tmax XT4 3(2)/4 300 Tmax XT4 4 300 Tmax XT4 (*) 4 KT1401(1) KT2411 KT3419 KT4411 24 mod. DIN W=600mm KT1101(1) 36 mod. DIN W=800mm Withdrawable No. Dimensions poles H (mm) Tmax T7-Emax X1 36 DIN mod. W=800mm Fixed + RCD mod. underneath Front or rear CB terminals KL1102(1) KT2111 KT3119 24 mod. DIN W=600mm KT2401(*) KT2101(*) KL2104(*) KT3401(*) KT3101(*) KL3104(*) KL3114 KT4111 KT4122 KT4127 KT4101 KT5101 KL5101 KT6111 (**) KT7110 KT7111 KX1419 KX1611 KX2411 KX2611 KT6131 KL7112 KT7560** KX1621 KX1401(*) KX1609(*) KX1801(*) KX2621 KX2631 (*) (4) KX2601 (*) (4) KX2801 KX2634(3) KX3411 KX3611 KX3811 KX3621 KX3601(*) KX4411 KX4611 KX3801(*) KX4622 KX4627 KX4633(3) 200 KX4601 (*) (4) Only front terminals, (**) Only rear terminals, (1) Version for Tmax with differential module underplaced RC 221/222. (2) For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for platemounting - AD3307 XT3 3P Flange for plate-mounting - AD3308 XT4 3P Flange for plate-mounting. (3) Withdrawable + RC.mod. underneath. (3) Also for plug-in. > Selection by components page 5/53 > In-depth technical information page 6/1 5/20 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frames D≥225mm Vertical installation Fixed Front or rear CB terminals Fixed + RCD mod. underneath Plug-in Withdrawable No. Dimensions 12 DIN mod. 24 DIN mod. 36 DIN mod. 12 mod. DIN 24 mod. DIN 36 mod. DIN 12 mod. DIN 24 mod. DIN 24 mod. DIN poles H (mm) W=390mm W=600mm W=800mm W=390mm W=600mm W=800mm W=390mm W=600mm W=600mm Tmax T1-T2-T3-XT1-XT3 on DIN 35 rail 200 (see page 5/16) Tmax T3 300 KT3416 KT3211 KT4412 KT4211 3/4 5 KL3212 Tmax T3 3/4 400 Tmax T4 3/4 400 Tmax T4 side by side 3/4 400 Tmax T4 4 500 Tmax T5 (400A) 3/4 400 KT5412 KT5211 KL5213 Tmax T5 (630A) 3/4 400 KT5412 KT5211 KL5213 Tmax T5 side by side 3/4 400 KT5214(2) KL5214(3) Tmax T5 3/4 500 Tmax T5 4 500 Tmax T5 side by side 3/4 500 Tmax T6 3/4 500 Tmax T6 side by side 3/4 500 Tmax T7-EMAX X1 3/4 500 KT3426 KT4116(3) KT3221 KT4221 KT4231 KT5222 KT5232 KT5221 KT5231 KL4118(1) KT4103 KT5401 KT6211 KT5103 KL5103 KT5117(2) KL5117(3) KL6214 KT6122 (2) KL6124 KT7211(4) Tmax T8 3/4 900 Tmax XT2 side by side(6) 3/4(7) 200 Tmax XT3 3(5)/4 300 KX3412 KX3613 Tmax XT4 3(5)/4 300 KX4412 KX4617 Tmax XT4 4 400 Tmax XT4 side by side 3(5)/4 300 Tmax XT4 side by side 3(5)/4 300 KL7212(4) KT7231(4) KT8211 KX2612 KX3812 KX4603 KX4616(2) KX4818(3) (1) Kit for No. 4 T4 circuit-breakers side by side, (2) Kit for No. 2 circuit-breakers side by side, (3) Kit for No. 3 circuit-breakers side by side, (4) Order No.2 blind panels H=100mm (PC....) for breakers with front terminals. (5) For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for platemounting - AD3307 XT3 3P Flange for plate-mounting - AD3308 XT4 3P Flange for plate-mounting. (6) No. 4 CBs side by side 3P, No. 3 CBs side by side 4P. (7) Order AD3310, AD3311, AD3312, AD3313 polished flange, see page 5/107. > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/21 ArTu K Modular Structures Selection of the structure STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frames D≥225mm Installation of equipped apparatus horizontally Tmax with direct rotary handle or motor operator Tmax interlocked or interlocked motor operated (*) 3/4 200 KT3114 KT3119 KT4111 KT4111 3/4 500 3/4 200 KT4127 KT4125 KT5111 KT5130 KT5134 KT5111 KT5111 KT5131 KT5135 KT6112 KT6115 KT6131 KT6114 (2) Tmax T4 3/4 300 Tmax T4 3/4 600(2) Tmax T5 (400A) 3/4 300 KT5111 Tmax T5 (630A) 3/4 300 (2) Tmax T5 3/4 600 Tmax T6 3/4 500 Tmax T6 3/4 800(2) Tmax T7**/Emax X1 3/4 400(1) KT7111 KT7111 Tmax XT1 3/4 200 KX1605 KX1607 Tmax XT1 3/4 500 Tmax XT2 3/4 200 KX2605 KX2607 KT3116 KT3121 KT3131 KT3131 KT3131 KI4114 KI4114 KI4114 KI5114 KI5114 KI5114 KI4114 KI5114 KT6116 KT6117 KT7111 KT7111 KX1622 KX1608 KX1622 KX1608 KX2622 KX2608 KX2622 KX2608 Tmax XT2 3/4 300 Tmax XT2 3/4 500 Tmax XT3 3/4 200 Tmax XT3 + XT1 3(3)/4 500 KX1131 KX1132 KX1131 KX1132 Tmax XT3 3(3)/4 500 KX3131 KX3132 KX3131 KX3132 Tmax XT4 3(3)/4 200 Tmax XT4 3/4 300 Tmax XT4 3(3)/4 500 KX4141 KX4142 KX4141 KX4142 Interlocked motor operated KT2111 Tmax T3 Interlocked KT1111 KT2112 Tmax T3 Motor operator KT1112 200 Tmax T4 Direct rotary handle 200 3/4 Interlocked motor operated 3/4 Tmax T2 Interlocked Tmax T1 Motor operator No. Dimensions poles H (mm) Interlocked Front or rear circuit-breaker terminals Direct rotary handle 24 DIN mod. W=600mm Interlocked motor operated Withdrawable 24 DIN mod. W=600mm Motor operator Plug-in 24 DIN mod. W=600mm Direct rotary handle 5 Fixed KI4115 KI4115 KI5115 KI5115 KT6118 KT6119 KX2632 KX3605 KX4606 KX3607 KX4607 KX4632 (*) Interlock plate to be ordered with the circuit-breakers. (**) Kit for a single circuit-breaker. (1) Kit for width 800mm KL7112. (2) Use with rear connection. (3) For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for platemounting - AD3308 XT4 3P Flange for plate-mounting. > Selection by components page 5/53 > In-depth technical information page 6/1 5/22 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frames D≥225mm Installation of equipped apparatus vertically Tmax with direct rotary handle or motor operator Motor operator Direct rotary handle Motor operator 3/4 400 KT4211 KT4211 KT4231 KT4126 Tmax T5 (400A) 3/4 400 KT5211 KT5211 KT5232 KT5138 Tmax T5 (630A) 3/4 400 KT5211 KT5211 Tmax T5 3/4 500 KT5231 KT5139 Tmax T6 3/4 500 KT6120 KT6121 KT6122 KT6123 Tmax T7** - Emax X1 3/4 500 Tmax XT2/XT4 3/4 400 KT7211 (1) KT7211 (1) KT7211 Interlocked Direct rotary handle Tmax T4 Motor operator Dimensions H (mm) (1) Direct rotary handle No. poles Interlocked Front or rear circuit-breaker terminals 5 Interlocked motor operated 24 DIN mod. W=600mm Interlocked Withdrawable 24 DIN mod. W=600mm Interlocked motor operated Plug-in 24 DIN mod. W=600mm Interlocked motor operated Fixed KT7231(2) KT7231(2) KT7231(2) KX2412 (*) Interlock plate to be ordered with the circuit-breakers. (**) Kit for a single circuit-breaker. (1) Kit for width 800mm KL7112. (2) Kit for width 800mm KL7213. > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/23 ArTu K Modular Structures Selection of the structure STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frames D≥225mm Installation of Emax/Emax 2 circuit-breakers No. Dimensions H poles (mm) Fixed 24 DIN mod. W=600mm 36 DIN mod. W=800mm Emax X1/T7 interlocked** 3/4 500 KT7211(1) KL7212(1) Emax E1(1)-E2(1)-E3 Emax E3/E3 interlocked** Emax E4/E4 interlocked** Emax E4 Full size Emax E6 50% Neutral Emax E1.2 Emax E2.2 Emax E2.2/E4.2 Emax E2.2/E4.2/E6.2 N.50% Horizontal installation Emax E1.2 Emax E1.2 3/4 3/4 3/4(2) 4 3/4 3/4 3/4 3/4 3/4 600 600 600 600 600 500 600 600 600 KE3215 3/4 3/4 400 500 Emax circuit-breakers Vertical installation 5 48 DIN mod. W=1000mm Withdrawable 24 DIN mod. W=600mm 36 DIN mod. W=800mm KT7231(1) KL7213(1) 48 DIN mod. W=1000mm KE3235 KE4215 KE5215 KE4235 KE5235 KE4000 KE6342 KN1556(3) KN2766(4) KE5237 KE6341 KN1758(3) KN1356 KN2566(5) KN4168(4) (6) KN4768(5) (6) KN6361 KN1446(3) KN1558 KN6166 KN1448(3) KN1156 The kit for installing Emax air circuit-breakers in the versions of switchgear indicated includes the pre-drilled front panel and the resting crosspieces. To install Emax E1…E3 circuit-breakers, always use 700mm depth (therefore also depth 900mm with kit SK..81), for Emax E4 use structures with 900mm depth or several structures placed side by side at the rear. It is necessary to install one E6 or one E6.2 breaker per column (depth D=900 mm), at a maximum height of H=1100 mm; moreover, under the E6 breaker it is not possible to install any other device. (1) This kit can also be used for motor operated, interlocked and interlocked motor operated version. (2) For the 4P version neutral 50% The E1.2 fixed with frontal terminals can be installed in an enclosure with D=300mm; the E1.2 fixed with rear terminals can be mounted in enclosures with D=500mm. Fixed/interlocked version. (5) Withdrawable/interlocked version. (6)For E4.2 (Fix./Interlocked or Withdrawable/Interlocked), use D=700mm (or D=900mm with proper intermediate uprights SK1881/ SK2081) for 3200A and D=900mm for 4000A. (**) Kit for a single circuit-breaker. (3) (4) Useful internal space Flat plate Recessed plate Recessed panel Flat panel Flat panel Structure ArTu K D≤300mm ArTu K D≥=500mm H recessed plate (mm) 200 400 200 400 600 > Selection by components page 5/53 A (mm) 45÷220 110÷220 45÷200 110÷270 250÷380 > In-depth technical information page 6/1 5/24 1STC008001D0204 | Technical catalogue B (mm) 75÷250 140÷250 75÷200 140÷300 280÷410 C (mm) 28 95 28 95 240 > Overall dimensions page 7/1 Minimum distance between back plate and busbar holder STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frames D≥225mm Kit per OT160÷1600 Dimensions (mm) 5 Description Code H W Poles Maximum length handle Minimum length shaft Kit OT160/200/250/315/400 vertical KO2260 300 600 E03-04 Decentralized Control 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT160/200/250/315/400 horizontal KO2261 300 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT630/800 vertical KO3660 400 600 E03-04 Decentralized 175mm 166mm Kit OT1000/1600A vertical KO1250(*) 600 600 E12-22 Central Handle “T” 400mm 166mm Kit OT160/200/250/315/400 vertical KO2280 300 800 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT160/200/250/315/400 horizontal KO2281 300 800 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12) Kit OT630/800 vertical KO3680 400 800 E03-04 Decentralized 175mm 166mm (*) Central control with butterfly lever. Apparatus of the OETL series up to 1600A (not motor operated) and OESA up to 800A (not motor operated) can be installed inside the floor-mounted ArTu K switchgear. Again in this case, according to the dimensions of the apparatus, a plain back plate must be used (PF or FR…) and a panel (PC or PR…) of appropriate height and depth. The useful space between panel and door is 50mm. For larger-sized handles, use plain recessed panels RR… (see dimensions in table). Plain flat, plain recessed back plates PF.... FR.... Back plates Plain flat H (mm) 12 DIN mod. W=390mm Plain recessed 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm FR2600 FR2800 100 200 PF2401 PF2601 PF2801 PF2100 300 PF3403 PF3601 PF3801 PF3100 400 PF4401 PF4601 PF4801 PF4100 FR4600 FR4800 600 PF6401 PF6601 PF6801 PF6100 FR6600 FR6800 Can be used to mount all the non-modular apparatus. > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/25 ArTu K Modular Structures Selection of the structure STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frames D≥225mm Modular blind panels, recessed and ventilated PC.... PR.... PA.... Panels Plain flat 5 Plain recessed H (mm) 12 DIN mod. W=390mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm 100 PC1400 PC1600 PC1800 PC1210 200 PC2400 PC2600 PC2800 PC1220 300 PC3400 PC3600 PC3800 PC1230 400 PC4400 PC4600 PC4800 500 600 PC1240 Ventilated 12 DIN mod. W=390mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm PA1600 PA1010 PR2600 PR2800 PA2600 PA2010 PR4600 PR4800 PR6600 PR6800 PC1250 PC6400 800 PC6600 PC6800 PC8600 PC8800 PC1260 Blind panels 1600 PC1660 PC1680 1800 PC1840 PC1860 PC1880 2000 PC2040 PC2060 PC2080 Can be used to mount all the non-modular apparatus. Back plates Pair of crosspieces included in codes AD1049, AD1050, AD1051 PM.... PF.... SK.... PC.... max 290 (D=362mm) 565 (D=637mm) 765 (D=837mm) 965 (D=1037mm) For assembly of the counter doors (PC1860, PC1880, PC2060, PC2080) or modular panels order the SK1804 or SK2004 functional frames. PF.... H (mm) Galvanised sheet back plate Track for front insertion 24 DIN mod. W=600mm 36 DIN mod. W=800mm 1800 PF1806 PF1808 2000 PF2006 PF2008 > Selection by components page 5/53 > In-depth technical information page 6/1 5/26 1STC008001D0204 | Technical catalogue D=362mm D=637mm D=837mm AD1049 AD1050 AD1051 > Overall dimensions page 7/1 48 DIN mod. W=1000mm STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frames D≥225mm Panels for square measuring instruments EV1135 EV1136 2-instrument panel 4-instrument panel 72x72mm 96x96mm 72x72mm 96x96mm H (mm) 24 DIN mod. W=600mm 36 DIN mod. W=800mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm 200 PS2720 PS2728 PS2960 PS2968 PS4720 PS4728 PS2017 PS4960 PS4968 PS2019 These allow installation of measuring instruments and relative changeover switches. Square instrument hole covers Code Description EV1135 Hole cover of 72x72mm instrument black RAL 9005 EV1136 Hole cover of 96x96mm instrument black RAL 9005 Installation of terminal boxes on DIN rail AD1055 AD1041 AD1041 AD1041 AD1054 Terminal box mounting position Installation on DIN rail Structure Horizontal AD1054 Horizontal angled 45° AD1041 Vertical Internal cable container External cable container AD1055 AD1055 Installation of terminal boxes on DIN rail and earthing busbar P≥225mm EV1110 EV1111 EV1112 EV1119 Supporti inclinati per morsettiere e barre di terra Code Description EV1110-EV2110 Angled supports 1 row of terminals EV1111 Angled supports double row of terminals EV1112-EV2112 Angled supports 1 row of terminals + earth > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/27 5 ArTu K Modular Structures Selection of the structure SEGREGATED STRUCTURES - Kit for switchgear D≥500mm Installation on DIN rail AD1600 PF2405 PF2005 PF2805 GD4005 GD7005 GD9005 GD1001 W=390mm 5 H (mm) 200 PM2424 PM2624 PM2836 PM2010 AD1086 W=600mm DIN rail kit 12 DIN mod. Panel 1 DIN row 12 DIN mod. GD4005 PM2424 W=800mm DIN rail kit 24 DIN mod. Panel 1 DIN row 24 DIN mod. GD7005 PM2624 W=1000mm DIN rail kit 36 DIN mod. Panel 1 DIN row 36 DIN mod. DIN rail kit 48 DIN mod. Panel 1 DIN row 48 DIN mod. GD9005 PM2836 GD1001 PM2010 Panels for square measuring instruments EV1135 EV1136 2-instrument panel 4-instrument panel 72x72mm 96x96mm 72x72mm 96x96mm H (mm) 24 DIN mod. W=600mm 36 DIN mod. W=800mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm 200 PS2720 PS2728 PS2960 PS2968 PS4720 PS4728 PS2017 PS4960 PS4968 PS2019 These allow installation of measuring instruments and relative changeover switches. Square instrument hole covers Code Description EV1135 Hole cover of 72x72mm instrument black RAL 9005 EV1136 Hole cover of 96x96mm instrument black RAL 9005 Modular back plate Back plates Blind flat H (mm) 12 DIN mod. W=390mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm 200 PF2405 PF2005 PF2805 PF2090 300 PF3405 PF3005 PF3805 PF3090 400 PF4405 PF4005 PF4805 PF4090 600 PF6405 PF6005 PF6805 PF6090 PF8005 PF8805 Can be used to mount all the apparatus. > Selection by components page 5/53 > In-depth technical information page 6/1 5/28 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 SEGREGATED STRUCTURES - Kit for switchgear D≥500mm Modular blind panel PC.... PR.... PA.... Panels Flat Recessed H (mm) 12 DIN mod. W=390mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm 100 PC1400 PC1600 PC1800 PC1210 200 PC2400 PC2600 PC2800 PC1220 300 PC3400 PC3600 PC3800 PC1230 400 PC4400 PC4600 PC4800 PC1240 PC6400 PC6600 PC6800 PC8600 PC8800 500 600 24 DIN mod. W=600mm Ventilated 36 DIN mod. W=800mm 24 DIN mod. W=600mm 5 PA1600 PR2600 PR2800 PR4600 PR4800 PR6600 PR6800 PA2600 PC1250 800 PC1260 Useful internal space Flat plate Recessed panel Flat panel Minimum distance between back plate and busbar holder. > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/29 ArTu K Modular Structures Selection of the structure SEGREGATED STRUCTURES - Kit for switchgear D≥500mmm Horizontal installation 5 Front or rear circuit-breaker terminals Fixed+RCD mod. undern. Plug-in No. Dimensions 12 DIN mod W=390mmm poles H (mm) 24 DIN mod W=600mm 24 DIN mod W=600mm 12 DIN mod W=390mm 24 DIN mod W=600mm Tmax T1 3/4 200 KT1410 KT1110 KT1100 (1) Tmax T2 3/4 200 KT2410 KT2110 KT2420 KT2120 Tmax T3 3/4 200 KT3410 KT3110 KT3420 KT3120 Tmax T4 3/4 200 KT4120 KT4124 Tmax T4 3/4 300 Tmax T5 (400A) 3/4 300 KT5122 KT5136 KT5420 KT5430 Tmax T5 (630A) 3/4 300 KT5122 KT5136 KT5421 KT5431 Tmax T6 3/4 500 KT6110 3/4 400 KT7115 Tmax T7 - Emax X1 Fixed 3/4 500 Tmax XT1 3(2)/4 200 Tmax XT1 4 200 Tmax XT2 3(2)/4 200 Tmax XT2 3(2)/4 300 Tmax XT2 4 200 Tmax XT3 3(2)/4 200 Tmax XT3 4 300 Tmax XT3 (2) 3 /4 300 Tmax XT4 3(2)/4 200 Tmax XT4 4 200 Tmax XT4 3(2)/4 300 Withdrawable 12 DIN mod W=390mm 24 DIN mod W=600mm KT4113 KT4130 KT6130 KT7561 KY1411 KY1611 KY2411 KY2611 KY1621 KY1601 KY2421 KY2621 KY2631 KY2601 KY3411 KY3611 KY3601 KY3421 KY4411 KY4611 KY3621 KY4621 KY4601 KY4631 (1) Version for Tmax with differential module underplaced RC 221/222 (only 4P). (2) For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting - AD3308 XT4 3P Flange for plate-mounting. > Selection by components page 5/53 > In-depth technical information page 6/1 5/30 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 SEGREGATED STRUCTURES - Kit for switchgear D≥500mm Installation of apparatus vertically Front or rear circuit-breaker terminals Fixed No. poles Dimensions 12 DIN mod W=390mm H (mm) 24 DIN mod W=600mm 36 DIN mod W=800mm Fixed+RCD mod. undern. Withdrawable 12 DIN mod W=390mm 12 DIN mod W=390mm 24 DIN mod W=600mm 24 DIN mod W=600mm Tmax T1-T2-T3-XT1-XT3 on DIN Rail 35 200 (see page 5/29) Tmax T4 3/4 400 KT4129 KT4121 KT4222 KT4128 Tmax T5 (400A) 3/4 400 KT5137 KT5128 KT5129 KT5223 Tmax T5 (630A) 3/4 400 KT5137 KT5128 Tmax T6 3/4 500 KT6210 KT7215 Tmax T7 3/4 500 Tmax T8 3/4 900 Tmax XT4 3(1)/4 300 (1) KT5125 KT5123 KT5126 KT5124 KT6230 KT7230 KT8210 KY4412 KY4612 For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting - AD3308 XT4 3P Flange for plate-mounting. > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/31 5 ArTu K Modular Structures Selection of the structure SEGREGATED STRUCTURES - Kit for switchgear D≥500mmm Installation of equipped apparatus horizontally Tmax with direct rotary handle or motor operator Tmax interlocked or interlocked motor operated (*) 200 KT2210 KT2110(1) Tmax T3 3/4 200 KT3115 KT3110(1) Tmax T3 3/4 500 Tmax T4 3/4 200 Tmax T4 3/4 300 Tmax T4 3/4 600 Tmax T5 (400A) 3/4 300 KT5136 KT5310 Tmax T5 (630A) 3/4 300 KT5136 KT5310 Tmax T5 3/4 600 Tmax T6 3/4 500 KT6220 KT6221 Tmax T6 3/4 800 KT3132 KT3132 KT4130 KT4320(2) KT5420 KT5430 KT5320(2) KT5421 KT5431 KT5321(2) KT6130 KT6134(2) Interlocked motor operated 3/4 Interlocked Tmax T2 Motor operator 200 Direct rotary handle 3/4 Interlocked motor operated Tmax T1 Interlocked No. Dimensions poles H (mm) Motor operator Motor operator Front or rear circuit-breaker terminals Direct rotary handle 24 DIN mod. W=600mm Interlocked motor operated Withdrawable 24 DIN mod. W=600mm Interlocked Plug-in 24 DIN mod. W=600mm Direct rotary handle 5 Fixed KI4117 KI4118 KI5117 KI5118 KT6144 KT6145 KT1110(1) KT4124 KT3124 KT4310 KT4113 KI4116 KI5116 Tmax T7* / Emax X1 3/4 400 KT7115 Tmax XT1 3/4 200 KY1605 (3) KT7115 KI4116 KI4116 KI5116 KT6142 KT6143 KT7115 KT7115 KI5116 KI4119 KI5119 KY1607 Tmax XT2 3/4 200 KY2605 KY2607 Tmax XT3 3/4 200 KY3605 KY3607 Tmax XT3 + XT1 3(4)/4 500 KY1131 Tmax XT3 3(4)/4 500 KY3131 Tmax XT4 (4) 3 /4 500 Tmax XT4 3/4 200 KY4141 KY4607 KY4604 (*) Interlock plate to be ordered with the circuit-breakers. (**) Kit for a single circuit-breaker. (1) Kit for 390mm width for T1 KT1410, T2 KT2410, T3 KT3410. (2) Only Form 2 segregation. (3) Use with protruding door PV..63 - PV..83. (4) For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting - AD3308 XT4 3P Flange for plate-mounting. > Selection by components page 5/53 > In-depth technical information page 6/1 5/32 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 SEGREGATED STRUCTURES - Kit for switchgear D≥500mm Installation of equipped apparatus vertically (Form 2 only) Tmax with direct rotary handle or motor operator KT7215 KT6230 KT6141 KT7230 Interlocked motor operated KT7215 Interlocked KT7215 Motor operator KT6133 Direct rotary handle KT6132 500 Interlocked motor operated 500 3/4 Interlocked 3/4 Tmax T7**/Emax X1 Motor operator Tmax T6 Direct rotary handle No. Dimensions poles H (mm) Interlocked motor operated Front or rear circuit-breaker terminals Interlocked Withdrawable 24 DIN mod. W=600mm Motor operator Plug-in 24 DIN mod. W=600mm Direct rotary handle Fixed 24 DIN mod. W=600mm KT7230 KT7230 (*) Interlock plate to be ordered with the circuit-breakers. (**) Kit for a single circuit-breaker. Installation of Emax/Emax 2 circuit-breakers Circuit-breaker Verical installation Emax X1/X1 interlocked** Emax E1/E2 Emax E3 Emax E3/E3 interlocked** Emax E4/E4 interlocked** Emax E4 Full size Emax E6 50% Neutral Emax E1.2 Emax E2.2 Emax E4.2 Emax E6.2 N.50% Horizontal installation Emax E1.2 Emax E1.2 No. Dimensions poles H (mm) Fixed 24 DIN mod. W=600mm 3/4 3/4 3/4 3/4 3/4(2) 4 3/4 3/4 3/4 3/4 3/4 500 600 600 600 600 600 600 500 600 600 600 KT7215(1) KE2215 KE3205 3/4 3/4 400 500 KN1243 36 DIN mod. W=800mm 48 DIN mod. W=1000mm Withdrawable 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm KT7230(1) KE2235 KE3236 KE4214 KE5214 KE4234 KE5234 KE4100 KE6340 KN1456 KN2066(3) KE5236 KE6343 KN1856 KN2666(4) KN4868(4) (5) KN4268(3) (5) KN6461 KN6061 KN1656 The kit for installing Emax air circuit-breakers in the versions of switchgear indicated includes the pre-drilled front panel and the resting crosspieces. To install Emax E1…E3 circuit-breakers, always use with 700mm depth (therefore also depth 900mm with kit SK..81), for Emax E4 use structures with 900mm depth or several structures placed side by side at the rear. It is necessary to install one E6 or E6.2 breaker per column (depth D=900 mm), at a maximum height of H=1100 mm; moreover, under the E6 breaker it is not possible to install any other device. To complete the 36 module structure, ask for the special back plates (PF.... see page 5/28). (1) This kit can also be used for the motor operated version. (2) This kit can also be used for the motor operated, interlocked and interlocked motor operated versions. Fixed/interlocked version. (4) Withdrawable/interlocked version. (5)For E4.2 (Fix./Interlocked or Withdrawable/Interlocked), use D=700mm (or D=900mm with proper intermediate uprights SK1881/ SK2081) for 3200A and D=900mm for 4000A. (**) Kit for a single circuit-breaker. (3) > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/33 5 ArTu K Modular Structures Selection of the structure Form 2-3-4 segregations for structures D≥500mm Segregations according to the IEC 60439-1 and IEC 61439 -1 -2 Standards By form of segregation, the type of subdivision provided inside the switchgear is meant. Segregation by means of barriers or partitions (metallic or insulating) can have the purpose of: - Ensuring protection against direct contacts (at least IPXXB), in the case of accessing a part of the switchgear with the power turned off, in relation to the rest of the switchgear left live. - Reducing the probability of an internal arc striking and propagating. - Preventing passage of solid bodies between different parts of the switchgear (at least IP2X degree of protection). By partition, the separation element between two compartments is meant, whereas the barrier protects the operator against direct contacts and the effects of an arc of the breaking apparatus in the normal access direction. 5 Simbol b a Form 1 Form 2 Form 3 Form 4 (no internal segregation) (segregation of the busbars from the functional units) (separation of the busbars from the functional units + separation of the functional units from each other) (separation of the busbars from the functional units + separation of the functional units from each other + separation of the terminals from each other) Form 2a Terminals not separated from the busbars Form 3a Terminals not separated from the busbars Form 4a Terminals in the same compartment as the associated functional unit Form 2b Terminals separated from the busbars Form 3b Terminals separated from the busbars Form 4b Terminals not in the same compartment as the associated functional unit d c Caption a Housing b Internal segregation c Functional units including the terminals for the associated external conductors d Busbars, including the distribution busbars Note The segregations can be made in ArTu K 390 and 600mm wide switchgear in 500/700/900mm depths with closed functional frame and segregated kits. Form 2 is obtained automatically using the segregated type kits. To obtain the desired form of segregation, the segregations kits relative to the previous forms must be ordered (e.g. Form 4 = Form 2 kit + Form 3 kit + Form 4 kit). > Selection by components page 5/53 > In-depth technical information page 6/1 5/34 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 Form 2-3-4 segregations for structures D≥500mm Examples of segregation 5 > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/35 ArTu K Modular Structures Selection of the structure Form 2-3-4 segregations for structures D≥500mm Forms of segregation + Selection of segregation according to the height of the kit Installation 5 Horizontal moulded-case circuit-breaker Form 2a Height kit (mm) Form 3a 12 DIN mod. W=390mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm 200 See kit on page 5/30 SH4000 SH6000 SH8000 SH1100 300 See kit on page 5/30 SH4000 SH6000 SH8000 SH1100 400 See kit on page 5/30 SH6000 SH8000 SH1100 500 See kit on page 5/30 SH6000 SH8000 SH1100 See kit on page 5/30 Included in Form 2 kit SH8000 SH1100 See kit on page 5/30 SH6000 SH8000 SH1100 SH6000 SH8000 SH1100 SH6000 SH8000 SH1100 Included in Form 2 kit 500 Tma T7-Emax X1 withdr. 600 600 T4-T5 interlocked See kit on page 5/32 800 Vertical moulded-case circuit-breaker 400 See kit on page 5/31 500 Emax X1-Tmax T6, T7 fixed 600 See kit on page 5/31 800 Vertical air circuit-breaker See kit on page 5/31 See kit on page 5/31 500 Emax X1-Tmax T7 withdr. See kit on page 5/32 Included in Form 2 kit 600 Emax E1-E2-E3 fixed See kit on page 5/33 Included in Form 2 kit Included in Form 2 kit 600 Emax E1-E2-E3 withdr. See kit on page 5/33 Included in Form 2 kit Included in Form 2 kit 600 Emax E4 fixed See kit on page 5/33 Included in Form 2 kit Included in Form 2 kit Emax E4 withdr. See kit on page 5/33 Included in Form 2 kit Included in Form 2 kit 600 Emax E6 fixed See kit on page 5/33 Included in Form 2 kit 600 Emax E6 withdr. See kit on page 5/33 Included in Form 2 kit Uprights for switchgear D=900mm Example of Form 2a segregation Example of Form 3a segregation 900 SH4000 SH6000 SH8000 SH1100 SH4000 SH6000 SH8000 SH1100 SK1881 SK2081 > Selection by components page 5/53 > In-depth technical information page 6/1 5/36 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 + + Form 3b Form 4b Horizontal circuit-breaker 12 DIN mod. W=390mm Vertical circuit-breaker 24 DIN mod. W=600mm D=500/700mm D=500/700 D=700mm D=900mm Horizz. CB 24 DIN mod. 24 DIN mod. 24 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod. Structure 24mod.DIN W=600mm W=600mm W=600mm W=600mm W=800mm W=1000mm D=500/700/ W=600mm D=900mm D=500mm D=700mm D=900mm D=900mm D=900mm 900mm P=500mm FH3224 FH3220 FH1020 FH4220 FH3434 FH3430 FH1030 FH4430 FH3544 FH3540 FH1040 FH4540 FH3650 FH1050 FH7580 FH3764 (1) FV4557 5 FH4650 FH1060 (3) 24mod.DIN W=600mm P=700mm Included in Form 3B kit FH7510 FH3760 Vertical CB FV4557 FH4760 Included in Form 3B kit (3) FH3680 (2) 4 x FH4220 FV3456 FV3458 FV4456 FV3556 FV3558 FV4556 FV3668 FV4458 FV4558 FV4668 FV3788 FV4788 FH3960 FH3690 FH3960 FH3690 FH3961 FH3691 FH3965 FH3190 FH3966 FH3191 FH3190 FH3191 (1) Only for blind back plate H=600mm. - (2) Only for Tmax T6 interlocked in fixed/plug-in/withdrawable/motor operated versions. - (3) For use with Tmax T4 - T5. For Emax 2 kit, the segregations Form 2 are already included in the segregated kit; segregations Form 3 are available under special offer request and Form 4 are those of Emax. Emax segregation Form 3b Rear segregation Example of Emax and Emax 2 segregation Form 4b Rear segregation Picture 1 Picture 2 SV2061 SV2081 SV2010 FH3960-FH3961 FH3965-FH3966 FH3690-FH3691 FH3190-FH3191 Picture 1 SV2080 SV2011 Rear segregation 200mm 200mm SV2064 400mm SV4081 SV4010 1800mm 2000mm No.3 SV2064 No.3 SV2064 No.2 SV2061 No.3 SV2061 Emax installed No.1 Picture 2 1600mm SV4080 SV4011 600mm 600mm > Selection by components page 5/53 Structure height > In-depth technical information page 6/1 Side segregation Side segregation 1800mm 2000mm No.1 SV4080 No.1 SV4080 No.1 SV2080 No.2 SV2080 Emax installed No.1 800mm > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/37 ArTu K Modular Structures Selection of the structure Form 2-3-4 segregations for structures D≥500mm Busbar segregation The SH2030, SH4030, SH1030, SH8570, SH1090 ed SV2061, SV4061, SV3060, SV2064, SV2081, SV3080, SV4081, SV2010, SV3010, SV4010 versions are reciprocally indispensable for assembly. The SH4030, SH1030, SH8570, SH1090 model must also be used in combination with shelves SH4000, SH6000, SH8000, SH1100 to make complete horizontal segregations of the busbar system. SH4000 SH6000 SH8000 SH1100 + 5 Horizontal Busbars 12 DIN mod. W=390mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm Universal horizontal shelf SH4000 (1) SH6000 (1) SH8000 (1) SH1100 Horizontal busbar segregation Vertical busbar segregation ≤4000A H=200mm Vertical busbar segregation >4000A H=300mm Vertical busbar segregation H=400mm Horizontal segregation for internal cable container W=200mm Horizontal segregation for external cable container W=300mm Horizontal segregation for structure used as busbar container W=390mm Horizontal segregation for structure used as busbar container W=600mm Side segregation AD1042 SV1860-SV1880 SV1815-SV2265 SV2285-SV2015 Spacers for AD1042 segregations Allow simultaneous assembly of the vertical segregations and crosspieces positioned between the functional frame and rear upright (cannot be coupled with the side panel). Structure D=500mm Structure D=700mm SV4080 SV4011 Vertical segregation for structure H=1800mm - No. 2 pieces SV1860 SV1880 SV1815 Vertical segregation for structure H=2000mm SV2265 SV2285 SV2015 SV2080 SV2011 Vertical Busbars Vertical segregation for structure H=1600mm - No. 4 pieces Structure D=900mm Rear segregation for internal cable container Segregation/front door for external cable container W=300mm Vertical segregation modular for structure H=200mm > Selection by components page 5/53 > In-depth technical information page 6/1 5/38 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 SH4033 SH4034 SH4035 SV4061 SV2061 2xSH2030* 2xSH4030 2xSH1030 2xSH8570 2xSH1090 1xSH2030* 1xSH4030 1xSH1030 1xSH8570 1xSH1090 + SV4064 SH4031 5 *2 pieces without vertical busbar system **1 piece with vertical busbar system 12 DIN mod. W=390mm D=500/700 24 DIN mod. W=600mm D=500/700 24 DIN mod. W=600mm D=900 36 DIN mod. WL=800mm D=500/700 48 DIN mod. W=1000mm D=900 SH4030 SH2030 SH1030 SH8570 SH1090 Rear segregation Cable container 12 DIN mod. W=390mm 24 DIN mod. W=600mm 36 DIN mod. W=800mm 48 DIN mod. W=1000mm SV4061 SV2061 SV2081 SV2010 SV3060 SV3080 SV3010 SV2064 SV4081 SV4010 Structure D=500mm Structure D=700mm SH4031 SH4031 SH4033 SH4033 SH4034 SH4034 SH4035 SH4035 Front segregation External cable container AD1024 AD1025 PO1831 PO2031 Structure H=1800mm Structure H=2000mm AD1024 AD1025 > Selection by components page 5/53 Structure H=1800mm Structure H=2000mm PO1831 PO2031 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/39 ArTu K Modular Structures Distribution system Modular dividers Single-pole Code AD1076 AD1080(1) AD1007 AD1081(2) AD1030 AD1031 AD1075 AD1006 In (A) 125 125 175 175 250 400 125 175 Icw (kA) 4.4 4.2 11 11 21 21 4.4 11 Version pole 1 1 1 1 1 1 3 3 DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate min. 10 6 16 10 35 95 10 16 max 35 35 70 70 35 70 6 6 Installation 5 Three-poles Power supply Ø cable (mm2) No. outgoing feeder Ø cable (mm2) 1,5÷10 2,5÷16 10 6 10 6 2,5÷25 Dimensions HxWxD (mm) No. DIN modules 120 185 4 4 5 5 2 2 71x45x42,5 74x27x47 71x45x42,5 92x35x49 95.5x45x49 95.5x45x49 71.5x80x42,5 71.5x80x42,5 2,5 1,5 2,5 2 3 3 4.5 4.5 Rated service voltage Ue (V) 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc 1000 Vac 1500 Vdc Degree of protection IP 20 20 20 20 20 20 20 20 Four-poles Code AD1004 AD1028 AD1029 AD1027 AD1034 AD1053 In (A) 125 125 125 160 250 250 Icw (kA) 10 4.2 4.2 6.2 15 15 Ipk (kA) 24 25 25 20 30 30 Version poli 4.2 4 4 4 4 4 DIN35/plate DIN35/plate DIN35/plate DIN35 with AD1035 brackets with AD1035 brackets 6 6 6 10 25 with cable terminal 25 with cable terminal 50 No. 22 holes M5 with 17,5mm pitch per phase (threaded busb. 20x5mm) No. 32 holes M5 with 17,5mm pitch per phase (threaded busb. 20x5mm) Installation Power supply Ø cable (mm2) min. max No. outgoing feeder Ø cable (mm2) 35 1/6 5/phase 1.5/6 4/neutral 1.5/10 2/phase 7 9 6/neutral 1.5/16 2 2.5/16 Dimensions HxWxD (mm) No. DIN modules 8 6/25 2 2 3 74.5x98x45 93x89x48 96x126x48 90x160.5x50 150x600x70 150x800x70 5,5 5 7 9 24 36 Rated service voltage Ue (V) 1000 Vac 1500 Vdc 440 440 440 500 500 Degree of protection IP 20 20 20 20 (1) Possibility of putting in parallel with AD1083 connections. (2) Possibility of putting in parallel with comb type connection (not supplied). > Selection by components page 5/53 > In-depth technical information page 6/1 5/40 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 Flexible busbars up to 1250A Capacity (A) Dimensions IP31 IP41 IP65 WxW (mm) In (A) Code No. busbar/ phase 250 BF1602 1 395 323 250 400 BF2502 1 498 460 400 500 BF4002 1 660 620 500 630 BF4012 1 758 702 630 1000 BF6302 1 1203 1140 1000 1250 BF8002 1 1515 1390 1250 20x3 20x5 24x6 32x5 Section dimensions (mm2) Lenght (mm) Weight (kg) 60 2000 1,42 100 2000 2,15 144 2000 3 160 2000 3,36 320 2000 6,33 500 2000 9,68 5 40x8 50x10 Flat drilled and threaded busbars for earthing connection Cross-section 5 20 Code Threading Pitch WxW (mm) Length (mm) AxB (mm) EV1119 6 MA 20 20x5 2000 EV1120 6 MA 20 25x5 2000 EV1121 6MA 25 50x5 2000 EV1122 6MA 34x30 EV1123 8MA 34x30 EV1124 6MA 40x50 EV1125 8MA 40x50 6MA 20 20 5 6MA 25 5 25 6MA 50 A B > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/41 ArTu K Modular Structures Distribution system Busbars with shaped section for applications up to 3200 A Capacity (A) Cross-section 5 Dimensions IP65 Icw max (kA) WxW (mm) Section dimensions (mm2) Lenght (mm) Weight (kg) 520 400 35 20x20 200 1730 4 970 830 800 35 20x20 283 1730 4,4 1 1400 1330 1250 75 20x60 603 1730 9,3 BA1600 1 1820 1710 1600 75 20x60 703 1730 10 2000 BA2000 1 2350 2200 2000 100 25x60 1000 1730 14,8 3200 BA2000 2 3600 3400 3200 100 25x60 2000 1730 29,6 In (A) Code No. busbar/ phase IP31 IP41 400 BA0400 1 630 800 BA0800 1 1250 BA1250 1600 > Selection by components page 5/53 > In-depth technical information page 6/1 5/42 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 Selection and assembly of flat busbars with shaped section and busbar holders Using the correct number of busbar holders ensures resistance to electrodynamic forces in the case of a short-circuit. Assess the maximum distance (max X) not to be exceeded between two consecutive busbar holders according to the max. Icc. 1/4 X X X 1/4 X The distance between the first busbar holder and the end of the busbar must not exceed 1 /4 of “X”. 5 No. of busbar holders according to the max. Icc Busbar Busbar Capacity holder No. busbars X max per phase 25 kA (mm) 35 kA X max (mm) 50 kA X max (mm) 65 kA X max (mm) 75 kA X max (mm) 85 kA X max (mm) X max 100 kA (mm) PB0803 1 4 550 5 425 - - - - - - - - - - PB1601 (1) 1 4 550 4 550 - - - - - - - - - - Lineare BA0400 400A 1 4 550 4 550 - - - - - - - - - - PB0803 1 4 550 5 425 - - - - - - - - - - PB1601 (1) 1 4 550 4 550 - - - - - - - - - - PB1603 (1) 1 4 550 4 550 - - - - - - - - - - PB1601 1 4 550 4 550 5 425 7 275 9 225 - - - - PB1603 1 4 550 4 550 6 350 9 225 - - - - - - PB1603 BA0800 BA1250 BA1600 BA2000 800A 1250A 1600A (1) PB1601 1 4 550 4 550 5 425 7 275 9 225 - - - - PB1603 1 4 550 4 550 6 350 9 225 - - - - - - 2000A PB3201 1 4 550 4 550 5 425 6 350 7 275 7 275 9 225 3200A PB3201 2 4 550 4 550 5 425 6 350 7 275 7 275 9 225 - Scalare BA0400 BA0800 400A 800A PB0802 1 4 550 5 425 - - - - - - - - - PB1600 (1) 1 4 550 4 550 - - - - - - - - - - PB0802 1 4 550 5 425 - - - - - - - - - - PB1600 (1) 1 4 550 4 550 - - - - - - - - - - BA1250 1250A PB1600 1 4 550 4 550 5 425 7 275 8 250 - - - - BA1600 1600A PB1600 1 4 550 4 550 5 425 7 275 8 250 - - - - (1) Can be used with the special AD1066 adapter. max X = maximum distance not to be exceeded between two consecutive busbar holders. > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/43 ArTu K Modular Structures Distribution system Busbars with shaped section Vertical installation Horizontal installation Side of structure or 2 internal/external cable container 1 Back of structure or external cable container 4 Busbar at top 5 Busbar at each height 3 Direct connection with Unifix H A B Selection and assembly of busbars and busbar holders 5 Busbar holder Busbars with shaped section Type In≤40÷800A In=1250A Scaled up to 800A PB0802 BA0400 BA0800 In=1600A Crosspieces for fixing to structure In=3200A Switchgear without Installation segregation 1 Segregated switchgear TV4001 (W=390mm) 2 Scaled up to 1600A PB1600 BA0400 BA0800 with adap. AD1066 BA1250 BA1600 1 2 Internal cable container Additional cable container TV3000 (D=150mm) TV3201 (W=300mm) TV3101 (D=225mm) TV3101 (D=225mm) TV5101 (D=300mm) TV5101 (D=300mm) TV4000 (W=390mm) TV3201 (W=300mm) TV8001 (D=700mm) TV8005 (D=700mm) TV8101 (D=700mm) TV6101 (D=500mm) TV1001 (D=900mm) TV1005 (D=900mm) TV1101 (D=900mm) TV8101 (D=700mm) TV1101 (D=900mm) Linear up to 800A PB0803 TV4001 (W=390mm) BA0400 BA0800 1 TV6202 (W=600mm) TV8202 (W=800mm) 3 TV6203 (W=600mm) TV8203 (W=800mm) Linear up to 1600A PB1601 BA0400 BA0800 with adap. AD1066 BA1250 BA1600 1 TV6201 (W=600mm)(1) TV6201 (W=600mm) TV8201 (W=800mm)(1) TV8201 (W=800mm) 2 4 5 (1) TV4000 (W=390mm) TV8001 (D=700mm) TV8005 (D=700mm) TV6101 (D=500mm) TV6101 (D=500mm) TV1001 (D=900mm) TV1005 (D=900mm) TV8101 (D=700mm) TV8101 (D=700mm) TV1101 (D=900mm) TV1101 (D=900mm) TV8211 (D=700mm) TV8211 (D=700mm) TV8211 (D=700mm) TV8211 (D=700mm) TV1211 (D=900mm) TV1211 (D=900mm) TV1211 (D=900mm) TV1211 (D=900mm) TV4221 (W=390mm) TV4221 (W=390mm) TV6221 (W=600mm) TV6221 (W=600mm) TV8221 (W=800mm) TV8221 (W=800mm) TV8011 (D=700mm) TV8011 (D=700mm) TV1011 (D=900mm) TV1011 (D=900mm) Only form 2 > Selection by components page 5/53 > In-depth technical information page 6/1 5/44 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 Vertical installation Horizontal installation Side of structure or 2 internal/external cable container 1 Back of structure or external cable container 4 Busbar at top 5 Busbar at each height 3 Direct connection with Unifix H A B Busbar holder 5 Busbars with shaped section Crosspieces for fixing to structure Type In≤40÷800A In=1250A In=1600A Switchgear without segregation Segregated switchgear Linear up to 1600A PB1603 BA0400 BA0800 with adap. AD1066 BA1600 TV4000 (W=390mm) TV4000 (W=390mm(1) TV6201 (W=600mm) TV6201 (W=600mm(1) TV8201 (W=800mm) TV8201 (W=800mm(1) TV6001 (D=500mm) TV8001 (D=700mm) BA1250 In=3200A Installation 1 2 4 A 5 B Linear up to 3200A PB3201 BA2000 1/2 busbar per phase 2 4 A 5 B (1) Internal cable container Additional cable container TV6005 (D=500mm) TV5101 (D=300mm) TV5101 (D=300mm) TV8005 (D=700mm) TV6101 (D=500mm) TV6101 (D=500mm) TV1001 (D=900mm) TV1005 (D=900mm) TV8101 (D=700mm) TV8101 (D=700mm) TV1261 (D=500mm) TV1261 (D=500mm) TV5101 (D=300mm) TV5101 (D=300mm) TV8211 (D=700mm) TV8211 (D=700mm) TV1261 (D=500mm) TV1261 (D=500mm) TV1211 (D=900mm) TV1211 (D=900mm) TV8211 (D=700mm) TV8211 (D=700mm) TV1211 (D=900mm) TV1211 (D=900mm) TV4221 (W=390mm) TV4221 (W=390mm) TV6221 (W=600mm) TV6221 (W=600mm) TV8221 (W=800mm) TV8221 (W=800mm) TV6011 (D=500mm) TV6011 (D=500mm) TV8011 (D=700mm) TV8011 (D=700mm) TV1011 (D=900mm) TV1011 (D=900mm TV8001 (D=700mm) TV8005 (D=700mm) TV8101 (D=700mm) TV8101 (D=700mm) TV1001 (D=900mm) TV1005 (D=900mm) TV1101 (D=900mm) TV1101 (D=900mm) TV8211 (D=700mm) TV8211 (D=700mm) TV8211 (D=700mm) TV8211 (D=700mm) TV6221 (W=600mm) TV6221 (W=600mm) TV8221 (W=800mm) TV8221 (W=800mm) TV8011 (D=700mm) TV8011 (D=700mm) TV1011 (D=900mm) TV1011 (D=900mm) Only form 2 > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/45 ArTu K Modular Structures Distribution system Flat busbars for distribution up to 6300 A Capacity (A) Cross-section In (A) Dimensions Code No. busbar/ phase IP65 Icw max (kA) IP31 IP41 WxW (mm) Lenght (mm) Weight (kg) 400 BR4005 1 530 490 400 35 32x5 1750 2,1 630 BR6305 1 772 695 630 50 50x5 1750 3,4 800 BR8005 1 951 863 800 50 63x5 1750 4,4 1250 BR1250 1 1431 1347 1250 50 100x5 1750 7,25 1600 BR1600 1 1836 1710 1600 105 100x10 1750 14,5 2000 BR2000 1 2250 2110 2000 105 120x10 1750 18,7 BR1600 2 3056 2700 2500 105 100x10 1750 29 3000 BR2000 2 3500 3200 3000 105 120x10 1750 37,4 3200 BR1600 3 4018 3600 3200 105 100x10 1750 43,5 4000 BR2000 3 4460 4250 4080 105 120x10 1750 56,1 5000 BR2500 3 5280 5000 NO 105 160x10 1750 75 6300 BR2010 3 6300 6000 NO 105 200x10 1750 93,5 5 2500 > Selection by components page 5/53 > In-depth technical information page 6/1 5/46 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 Selection and assembly of flat busbars and busbar holders Using the correct number of busbar holders ensures resistance to electrodynamic forces in the case of a short-circuit. Assess the maximum distance (max X) not to be exceeded between two consecutive busbar holders according to the max. Icw. 1/4 X X X 1/4 X The distance between the first busbar holder and the end of the busbar must not exceed 1 /4 of “X”. 5 No. of busbar holders according to the max. Icw Busbar Busbar Capacity holder No. busbars/type per phase 25 kA X max (mm) 35 kA X max (mm) 50 kA X max (mm) 75 kA X max (mm) 100 kA X max (mm) BR4005 400A BP1250 1 7 300 9 225 - - - - - - BR6305 630A BP1250 1 6 375 7 275 9 225 - - - - BR8005 800A BP1250 1 5 425 7 300 9 225 - - - - BR1250 1250A BP1250 1 4 500 6 375 8 250 - - - - BR1600 1600A BP1600 1 3 1000 3 1000 4 600 6 375 9 225 BR2000 2000A BP1600 1 3 1000 3 1000 4 600 6 375 9 225 BR1600 2500A BP2500 2 x BR1600 3 1000 3 1000 3 900 5 400 9 225 BR2000 3000A BP2500 2 x BR2000 3 1000 3 1000 3 900 5 400 9 225 BR1600 3200A BP3200 3 x BR1600 3 1000 3 1000 3 800 5 400 9 225 BR2000 4000A BP3200 3 x BR2000 3 1000 3 1000 3 800 5 400 9 225 BR2500 5000A BP1621 3 x BR2500 3 1000 3 1000 3 800 5 400 9 225 BR2010 6300A BP1622 3 x BR2010 3 1000 3 1000 3 800 5 400 9 225 max X = maximum distance not to be exceeded between two consecutive busbar holders > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/47 ArTu K Modular Structures Distribution system Flat busbars for distribution up to 6300A Vertical installation Horizontal installation 1 Back of structure 3 Busbar al top 2 Side of structure or internal/external cable container 4 Busbar at each height Selection and assembly of busbars and busbar holders 5 Busbar holder Flat busbars Crosspieces for fixing to structure Type In=400÷1250A Linear up to 1600A BP1250A BR4005 BR6305 BR8005 BR1250 1 busbar per phase In=1600÷6300A Switchgear without Installation segregation 1 2 3 4 Linear up to 1600A/2000A BP1600 BR1600 BR2000 1 busbar per phase 1 2 3 4 Linear up to 2500A/3000A BP2500 BR1600 BR2000 2 busbars per phase 1 2 3 4 > Selection by components page 5/53 > In-depth technical information page 6/1 5/48 1STC008001D0204 | Technical catalogue Segregated switchgear Internal cable container Additional cable container TR7005 (W=600mm) TR7005 (W=600mm) TR8000 (W=800mm) TR8000 (W=800mm) TR6001 (D=500mm) TR6005 (D=500mm) TR6101 (D=500mm) TR6101 (D=500mm) TR8001 (D=700mm) TR8005 (D=700mm) TR8101 (D=700mm) TR8101 (D=700mm) TV1001 (D=900mm) TV1005 (D=900mm) TV1101 (D=900mm) TV1101 (D=900mm) TV1261 (D=500mm) TV1261 (D=500mm) TV1261 (D=500mm) TV1261 (D=500mm) TV8211 (D=700mm) TV8211 (D=700mm) TV8211 (D=700mm) TV8211 (D=700mm) TV1211 (D=900mm) TV1211 (D=900mm) TV1211 (D=900mm) TV1211 (D=900mm) TR6201 (D=500mm) TR6205 (D=500mm) TR6301 (D=500mm) TR6301 (D=500mm) TR8201 (D=700mm) TR8205 (D=700mm) TR8301 (D=700mm) TR8301 (D=700mm) TR1201 (D=900mm) TR1205 (D=900mm) TR7005 (W=600mm) TR7005 (W=600mm) TR8000 (W=800mm) TR8000 (W=800mm) TR6001 (D=500mm) TR6005 (D=500mm) TR6101 (D=500mm) TR6101 (D=500mm) TR8001 (D=700mm) TR8005 (D=700mm) TR8101 (D=700mm) TR8101 (D=700mm) TV1001 (D=900mm) TV1005 (D=900mm) TV1101 (D=900mm) TV1101 (D=900mm) TV1261 (D=500mm) TV1261 (D=500mm) TV1261 (D=500mm) TV1261 (D=500mm) TV8211 (D=700mm) TV8211 (D=700mm) TV8211 (D=700mm) TV8211 (D=700mm) TV1211 (D=900mm) TV1211 (D=900mm) TV1211 (D=900mm) TV1211 (D=900mm) TR6201 (D=500mm) TR6205 (D=500mm) TR6301 (D=500mm) TR6301 (D=500mm) TR8201 (D=700mm) TR8205 (D=700mm) TR8301 (D=700mm) TR8301 (D=700mm) TR1201 (D=900mm) TR1205 (D=900mm) TR7005 (W=600mm) TR7005 (W=600mm) TR8000 (W=800mm) TR8000 (W=800mm) TR8001 (D=700mm) TR8005 (D=700mm) TR8101 (D=700mm) TR8101 (D=700mm) TV1001 (D=900mm) TV1005 (D=900mm) TV1101 (D=900mm) TV1101 (D=900mm) TV8211 (D=700mm) TV8211 (D=700mm) TV8211(D=700mm) TV8211(D=700mm) TV1211 (D=900mm) TV1211 (D=900mm) TV1211 (D=900mm) TV1211 (D=900mm) TR8201 (D=700mm) TR8205 (D=700mm) TR8301 (D=700mm) TR8301 (D=700mm) TR1201 (D=900mm) TR1205 (D=900mm) > Overall dimensions page 7/1 Vertical installation Horizontal installation 1 Back of structure 3 Busbar al top 4 Busbar at each height 2 Side of structure or internal/external cable container Selection of busbars holders and crosspieces Busbars holders Type Shaped busbars In=400÷1250A Linear up to 3200A BP3200 In=1600÷6300A BR1600 3 busbars per phase Installation 1 2 3 BR2000 3 busbars per phase BR2000 not drilled Linear up to 5000A BP1621 BR2500 3 busbars per phase Internal cable container reduced frames Additional cable container Switchgear without segregation Segregated switchgear TR7005 (W=600mm) TR7005 (W=600mm) TR8000 (W=800mm) TR8000 (W=800mm) TR8001 (D=700mm) TR8005 (D=700mm) TR8101 (D=700mm) TR8101 (D=700mm) TV1001 (D=900mm) TV1005 (D=900mm) TV1101 (D=900mm) TV1101 (D=900mm) TV8211 (D=700mm) TV8211 (D=700mm) TV8211(D=700mm) TV8211(D=700mm) TV1211 (D=900mm TV1211 (D=900mm TV1211 (D=900mm TV1211 (D=900mm TR8301 (D=700mm) TR8301 (D=700mm) TR8201 (D=700mm) TR8205 (D=700mm) TR1201 (D=900mm) TR1205 (D=900mm) 1 TR8000 (W=800mm) TR8000 (W=800mm) 2 TV1001 (D=900mm) TV1005 (D=900mm) TV1101 (D=900mm) TV1101 (D=900mm) 3 TV1311 (D=900mm) TV1311 (D=900mm) TV1311 (D=900mm) TV1311 (D=900mm) 4 TR1201 (D=900mm) TR1205 (D=900mm) 2 TV2630 (D=900mm) TV2631 (D=900mm) TV2632 (D=900mm) TV2632 (D=900mm) 3 TV2633 (D=900mm) TV2633 (D=900mm) TV2633 (D=900mm) TV2633 (D=900mm) 4 TV2634 (D=900mm) TV2635 (D=900mm) 2 TV2630 (D=900mm) TV2631 (D=900mm) TV2632 (D=900mm) TV2632 (D=900mm) 3 TV2633 (D=900mm) TV2633 (D=900mm) TV2633 (D=900mm) TV2633 (D=900mm) 4 TV2634 (D=900mm) TV2635 (D=900mm) 4 Linear up to 4000A BP3200 5 Crosspieces for fixing to structure BR2500 not drilled Linear up to 6300A BP1622 BR2010 3 busbars per phase BR2010 not drilled > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/49 ArTu K Modular Structures Distribution system Unifix systems Technical characteristics Unifix H Unifix L Rated service voltage (Ue) 690V AC 400V AC 500V AC Rated insulation voltage (Ui) 1000V AC Rated impulse withstand voltage (Uimp) 8kV 6kV Rated frequency 50/60Hz 50/60Hz 400A 100A 320A 80A Rated current (In) central power supply lateral power supply Rated short-time withstand current (Icw) 5 25kA Maximum peak current (Ipk) 52,5kA-400V Maximum installable circuit-breaker size 250A Conditioned short-circuit current (Icc) Tmax T1 36kA-400V Tmax T2 N, S (1) 50kA-400V Tmax T3 50kA-400V Tmax XT1 50kA-400V Tmax XT3 50kA-400V With circuit-breaker 100A S200 6kA-400V S200M 10kA-400V S200P 25kA-400V Degree of protection IP20 with accessory IP20 Characteristics of the insulating material Self-extinguishing thermoplastic V1 (UL94) Self-extinguishing thermoplastic V1 (UL94) Characteristics of the conductor material Electrolytic copper Electrolytic copper Width (No. modules/mm) 24/600 36/800 12/400 24/600 36/800 Installation of Unifix system Frame for Tmax T and Tmax XT series 300x600mm (HxW) 300x800mm (HxW) ED2183 ED2191 Fixing brackets H=300mm AD1061 Crosspiece for direct connection to W=600mm the rear busbars with shaped section with PB0803 W=800mm TV6202(2) Busbar 2P Busbar 4P Fixing support TV6203 TV8203 12 mod. ED2993 18 mod. ED3009 24 mod. ED3017 36 mod. ED3025 12 mod. ED2944 18 mod. ED2951 24 mod. ED2969 36 mod. ED2977 12 mod. GD4002 24 mod. GD6002 36 mod. GD8002 (1) Select circuit-breakers in version with front terminals for copper cables. (2) ArTu D=150mm. > Selection by components page 5/53 > In-depth technical information page 6/1 5/50 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 Unifix systems Direct connection with the 400/800A system of busbars with shaped section. Feeder module for 400A frame (L1-L2-L3-N). Direct power supply of the bases by means of feeder module ED2209. Power supply by means of general row circuit-breaker. N N L1 L1 T T L2 L2 N L3 L3 T N N Connections (L1-L2-L3-N) for System Pro M modular apparatus. Power supply of the busbar with 100A feeder module without cable. Terminal capacity 35mm2. Direct power supply of the busbars by means of feeder module. Power supply by means of modules and cables in parallel. T N T > Selection by components page 5/53 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/51 5 ArTu K Modular Structures Distribution system Unifix systems Table for selecting connections according to the circuit-breaker Circuit-breaker series Unifix H SN201 DS941 (top power supply) ED2654 L1/N 40A ED2662 L2/N 40A ED2670 L3/N 40A (top power supply) ED2531 L1 63A ED2549 L2 63A ED2556 L3 63A ED2564 N 63A ED2845 False pole module (top power supply) ED2557 L1 ≤32A ED2558 L2 ≤32A ED2559 L3 ≤32A ED2560 N ≤32A ED2551 L1 125A ED2552 L2 125A ED2553 L3 125A ED2554 N 125A ED2550 False pole module (top power supply) ED2720 L1 100A ED2738 L2 100A ED2746 L3 100A ED2753 N 100A (top power supply) ED2894 L1/N 16A ED2902 L1/L2 16A S200 - DS200 F200 up to 63A (Unifix L) 5 S800 S280 (80-100A) E200 up to 100A - RS370 - F200 80/100A (Unifix H) MDRC - Various apparatus Tmax T1 Tmax XT1 Tmax T2 Tmax T3 Tmax XT3 Circuit-breaker Residual current Selenoid operator Circuit-breaker Residual current Selenoid operator Circuit-breaker Residual current (top/bottom power supply) ED2217 L1 Top/L2 Bottom ED2225 L2 Top/L1 Bottom ED2233 L3 Top/N Bottom ED2241 N Top/L3 Bottom ED2373 False pole module ED2381 False pole module (top/bottom power supply) ED2258 L1 Top/L2 Bottom ED2266 L2 Top/L1 Bottom ED2274 L3 Top/N Bottom ED2282 N Top/L3 Bottom ED2373 False pole module ED2399 False pole module (top power supply) ED2290 L1 ED2308 L2 ED2316 L3 ED2324 N ED2373 False pole module Unifix L ED3272 L1/N 40A ED3280 L2/N 40A ED3298 L3/N 40A (bottom power supply) ED2572 L1 63A ED2590 L2 63A ED2598 L3 63A ED2606 N 63A ED3033 L1 100A ED3041 L2 100A ED3058 L3 100A ED3066 N 100A ED3132 pow. supply L1/L2/L3/N - 350mm ED0026 pow. supply L1/L2/L3/N - 1500mm ED0025 pow. supply L1/L2/L3/N - 2500mm (low power supply) ED2910 L1/N 16A ED2928 L1/L2 16A ED3108 pow. supply 2 cables L1/N 16A ED3116 pow. supply 3 cables L1/L2/L3 16A ED3124 pow. supply 4 cables L1/L2/L3/N 16A ED3355 pow. supply 2 cables L1/N 40A ED3363 pow. supply 3 cables L1/L2/L3 40A ED3371 pow. supply 4 cables L1/L2/L3/N 71A (bottom power supply) ED2332 L1 ED2340 L2 ED2357 L3 ED2365 N For the DDA locks, order the false module ED2845 codes separately according to the size of the residual current lock. If mounting XT1-XT3 on Unifix H, the polished flanges AD3301, AD3302, AD3303, AD3304 must also be ordered, see spare parts page 5/107. > Selection by components page 5/53 > In-depth technical information page 6/1 5/52 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu K Modular Structures Ordering codes SK40.. SK60.. SK80.. STRUCTURES WITHOUT SEGREGATION/SEGREGATED Structure Base-Top-Base strip Preassembled structure complete with cable input flange, base strip angle pieces and front flanges – the lateral ones must be ordered separately. SK1600 SK1800 SK2000 Dimensions (mm) D Code Package/ No. of pieces Base-Top-Base strip 225 SK4040 1/1 Base-Top-Base strip 300 SK4050 1/1 Base-Top-Base strip 500 SK4060 1/1 Base-Top-Base strip 700 SK4080 1/1 Base-Top-Base strip 900 SK4010 1/1 Base-Top-Base strip 150 SK6025 1/1 Base-Top-Base strip 225 SK6040 1/1 Base-Top-Base strip 300 SK6050 1/1 Base-Top-Base strip 500 SK6060 1/1 Base-Top-Base strip 700 SK6080 1/1 Base-Top-Base strip 900 SK6010 1/1 Base-Top-Base strip 150 SK8025 1/1 Base-Top-Base strip 225 SK8040 1/1 Base-Top-Base strip 300 SK8050 1/1 Base-Top-Base strip 500 SK8060 1/1 Base-Top-Base strip 700 SK8080 1/1 Base-Top-Base strip 900 SK8010 1/1 900 SK1010 1/1 Description 12 DIN mod - W=390mm SK40.. SK60.. SK80.. ZD.... 5 24 DIN mod - W=600mm 24 DIN mod - W=800mm 24 DIN mod - W=1000mm Base-Top-Base strip Uprights Dimensions (mm) Description H Code Package/ No. of pieces No. 4 uprights 1600 SK1600 1/4 No. 4 uprights 1800 SK1800 1/4 No. 4 uprights 2000 SK2000 1/4 Code Package/ No. of pieces No.2 base strip lateral flanges 150 ZD1015 1/2 No.2 base strip lateral flanges 225 ZD1025 1/2 No.2 base strip lateral flanges 300 ZD1030 1/2 No.2 base strip lateral flanges 500 ZD1050 1/2 No.2 base strip lateral flanges 700 ZD1070 1/2 No.2 base strip lateral flanges 900 ZD1090 1/2 Base strip lateral flanges Dimensions (mm) Description > Selection by components page 5/53 > In-depth technical information page 6/1 D > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/53 ArTu K Modular Structures Ordering codes SK6600 SK8800 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Structure Base-Top-Base strip for corner switchgear Dimensions (mm) SK1815 SK2015 Description W W Code Package/ No. of pieces Corner base-Top-Base strip 500 500 SK6600 1/1 Corner base-Top-Base strip 700 700 SK8800 1/1 Corner base-Top-Base strip 900 900 SK1100 1/1 5 Uprights for corner switchgears Dimensions (mm) 1600/1800/2000 150mm ≤Tmax T6 fisso Description H Code Package/ No. of pieces No. 4 corner uprights 1800 SK1815 1/4 No. 4 corner uprights 2000 SK2015 1/4 Functional frames for switchgear without segregation (open frame) Allow the circuit-breaker door kit to be mounted in the combinations shown in the table. Dimensions (mm) H Code Package/ No. of pieces No.2 functional frames 1600 SK1604 1/2 No.2 functional frames 1800 SK1804 1/2 No.2 functional frames 2000 SK2004 1/2 No.2 standard frame 1800 SK1803 1/2 No.2 standard frame 2000 SK2003 1/2 Description Reduced frame Standard frame ≥225mm To make structures with internal cable container (switchgear W=800mm) the functional frame is already included in the internal cable container kit (see page 5/61). Mouldedcase circuitbreakers Air circuit breakers > Rapid selection table page 5/6 150 225 Reduced no ≤T6 ≤T6 Standard no 300 500 700 900 ≤T6 ≤T6 ≤T6 ≤T6 yes ≤T7 ≤T7 ≤T7 yes ≤T7 ≤T7 ≤T7 Withdrawable yes ≤T7 ≤T7 ≤T7 With accessor. yes ≤T7 ≤T7 ≤T7 Fixed no Fixed/withdr. yes Fixed yes yes > In-depth technical information page 6/1 5/54 1STC008001D0204 | Technical catalogue Horiz busbars > Overall dimensions page 7/1 ≤T6 ≤T7 X1 X1 X1 X1 ≤E3 ≤E4 Maximum circuit-breaker installable 1800/2000 Switchgear depth [mm] Type of frame ≥500mm STRUCTURES WITHOUT SEGREGATION/SEGREGATED Structure Functional frames for segregated switchgear (closed frame) 1800/2000 Dimensions (mm) Description H Code Package/ No. of pieces No.2 segregated functional frames 1800 SK1802 1/2 No.2 segregated functional frames 2000 SK2002 1/2 To make structures with internal cable container (switchgear W=800mm), the functional frame is already included in the kit for internal cable container (see page 5/61). 5 IP65 Side panels Dimensions (mm) D Code Package/ No. of pieces 150 LF1626 1/2 No.2 side panels IP65 150 LF1826 1/2 No.2 side panels IP65 225 LF1840 1/2 No.2 side panels IP65 300 LF1850 1/2 No.2 side panels IP65 500 LF1860 1/2 No.2 side panels IP65 700 LF1880 1/2 No.2 side panels IP65 900 LF1810 1/2 No.2 side panels IP65 150 LF2026 1/2 No.2 side panels IP65 225 LF2040 1/2 No.2 side panels IP65 300 LF2050 1/2 No.2 side panels IP65 500 LF2060 1/2 No.2 side panels IP65 700 LF2080 1/2 No.2 side panels IP65 900 LF2010 1/2 Description H=1600mm No.2 side panels IP65 H=1800mm H=2000mm IP41 Ventilated side panels Aeration surface Dimensions entry side (1) (mm) D (cm2) Code Package/ No. of pieces No.2 ventilated side panels IP41 500 75 LA1860 1/2 No.2 ventilated side panels IP41 700 113 LA1880 1/2 No2 ventilated side panels IP41 900 170 LA1810 1/2 No.2 ventilated side panels IP41 500 75 LA2060 1/2 No.2 ventilated side panels IP41 700 113 LA2080 1/2 No.2 ventilated side panels IP41 900 170 LA2010 1/2 Description H=1800mm H=2000mm (1) Valid for 1 panel. > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/55 ArTu K Modular Structures Ordering codes 390 600-800-1000 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Structure IP65 Front or rear blind doors IP65 12/24/36/48 mod. blind doors Door made of 15/10 thick steel sheet fitted with polyurethane gasket complete with handle with key with double tab. Reversible, can be hinged on the right or left. Dimensions (mm) W H Code Package/ No. of pieces Blind door IP65 390 1800 PO1841 1/1 Blind door IP65 390 2000 PO2041 1/1 Blind door IP65 600 1600 PO1661 1/1 Blind door IP65 600 1800 PO1861 1/1 Blind door IP65 600 2000 PO2061 1/1 Blind door IP65 800 1600 PO1681 1/1 Blind door IP65 800 1800 PO1881 1/1 Blind door IP65 800 2000 PO2081 1/1 Blind door IP65 1000 1800 PO1811 1/1 Blind door IP65 1000 2000 PO2011 1/1 Description 12 DIN mod. 5 PV1841-PO2041 PO1661-PO1861 PO2061-PO1681 PO1881-PO2081 PO1811-PO2011 24 DIN mod. 36 DIN mod. 48 DIN mod. 390 600-800-1000 IP65 Front or rear glass doors Glass doors 12/24/36 mod. Door made of 15/10 thick steel sheet with 4 mm thick safety glass fitted with polyurethane gasket complete with handle with key with double tab. Reversible, can be hinged on the right or left. Dimensions (mm) W H Code Package/ No. of pieces Glass door IP65 390 1800 PV1841 1/1 Glass door IP65 390 2000 PV2041 1/1 Glass door IP65 600 1600 PV1661 1/1 Glass door IP65 600 1800 PV1861 1/1 Glass door IP65 600 2000 PV2061 1/1 Glass door IP65 800 1600 PV1682 1/1 Glass door IP65 800 1800 PV1882 1/1 Glass door IP65 800 2000 PV2082 1/1 Description 12 DIN mod. 24 DIN mod. PV1841-PV2041 800-1000 PV1661-PV1861 PV2061-PV1682 PV1882-PV2082 PV1811-PV2011 200 600-800 36 DIN mod. 24 DIN mod. + internal cablr container (Only for structures W=800mm consisting of 24 mod. + internal cable container). Glass door IP65 + cale cont. 800 1600 PV1681 1/1 Glass door IP65 + cale cont. 800 1800 PV1881 1/1 Glass door IP65 + cale cont. 800 2000 PV2081 1/1 Glass door IP65 1000 1800 PV1811 1/1 Glass door IP65 1000 2000 PV2011 1/1 48 DIN mod. PV1681-PV1881 PV2081-PV1812 PV2012 > Rapid selection table page 5/6 36 DIN mod. + internal cablr container (Only for structures W=1000mm consisting of 48 mod. + internal cable container). Glass door IP65 + cale cont. 1000 1800 PV1812 1/1 Glass door IP65 + cale cont. 1000 2000 PV2012 1/1 > In-depth technical information page 6/1 5/56 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Structure IP65 Blind side doors Dimensions (mm) D Code Package/ No. of pieces No.2 side doors IP65 225 LI1840 1/2 No.2 side doors IP65 500 LI1860 1/2 No.2 side doors IP65 700 LI1880 1/2 No.2 side doors IP65 225 LI2040 1/2 No.2 side doors IP65 500 LI2060 1/2 No.2 side doors IP65 700 LI2080 1/2 Description H=1800mm H=2000mm 5 IP65 Front extending glass doors 600-800 Dimensions (mm) W H Code Package/ No. of pieces External extending glass door IP65 600 1800 PV1863 1/1 External extending glass door IP65 600 2000 PV2063 1/1 External extending glass door IP65 800 1800 PV1883 1/1 External extending glass door IP65 800 2000 PV2083 1/1 Description 24 DIN mod. 82 36 DIN mod. > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/57 ArTu K Modular Structures Ordering codes STRUCTURES WITHOUT SEGREGATION/SEGREGATED Structure IP65 Rear panels Dimensions (mm) W H Code Package/ No. of pieces Rear panel IP65 390 1800 RF1840 1/1 Rear panel IP65 390 2000 RF2040 1/1 Rear panel IP65 600 1600 RF1660 1/1 Rear panel IP65 600 1800 RF1860 1/1 Rear panel IP65 600 2000 RF2060 1/1 Rear panel IP65 800 1600 RF1680 1/1 Rear panel IP65 800 1800 RF1880 1/1 Rear panel IP65 800 2000 RF2080 1/1 Rear panel IP65 1000 1800 RF1810 1/1 Rear panel IP65 1000 2000 RF2010 1/1 Description 12 DIN mod. 24 DIN mod. 5 36 DIN mod. 48 DIN mod. Rear ventilatd panels IP41 Dimensions (mm) W H Code Package/ No. of pieces Ventilated rear panel 600 1800 RA1860 1/1 Ventilated rear panel 600 2000 RA2060 1/1 Ventilated rear panel 800 1800 RA1880 1/1 Ventilated rear panel 800 2000 RA2080 1/1 Ventilated rear panel 1000 1800 RA1810 1/1 Ventilated rear panel 1000 2000 RA2010 1/1 Description 24 DIN mod. 36 DIN mod. 48 DIN mod. > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/58 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Structure IP3040-IP3060 IP3080-IP3010 IP3030 IP 31 Finishing section For IP31 version switchgear (without door), use the special finishing kits already sized for the standard heights and widths of ArTu switchgear. In the case of switchgear placed side by side, use the special double IP31 kit on the joining uprights. Horizontal section Dimensions (mm) Description W Code Package/ No. of pieces 390 IP3040 1/2 600 IP3060 1/2 800 IP3080 1/2 1000 IP3010 1/2 300 IP3030 1/2 12 DIN mod. No.2 IP31 horizontal finishing sections 24 DIN mod. 5 No.2 IP31 horizontal finishing sections 36 DIN mod. No.2 IP31 horizontal finishing sections 48 DIN mod. No.2 IP31 horizontal finishing sections External cable container W=300mm No.2 IP31 horizontal finishing sections Vertical section Dimensions (mm) IP3161 IP3180 IP3200 IP3163 IP3182 IP3202 > Rapid selection table page 5/6 Description H Code Package/ No. of pieces No.2 IP31 vertical finishing sections 1600 IP3161 1/2 No.2 IP31 vertical finishing sections 1800 IP3180 1/2 No.2 IP31 vertical finishing sections 2000 IP3200 1/2 Double vertical finishing profile IP31 for side-by-side switchgear 1600 IP3163 1/2 Double vertical finishing profile IP31 for side-by-side switchgear 1800 IP3182 1/2 Double vertical finishing profile IP31 for side-by-side switchgear 2000 IP3202 1/2 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/59 ArTu K Modular Structures Ordering codes STRUCTURES WITHOUT SEGREGATION/SEGREGATED Structure Kit IP41 Not segregated structures Dimensions (mm) SH.... Description W Code Package/ No. of pieces 390 IP4140 1/4 600 IP4160 1/4 800 IP4180 1/4 W Code Package/ No. of pieces 390 IP4141 1/4 600 IP4161 1/4 800 IP4181 1/4 12 DIN mod. No.4 IP41 horizontal kits for not segregated structures 24 DIN mod. No.4 IP41 horizontal kits for not segregated structures 5 IP4140 IP4160 IP4180 36 DIN mod. No.4 IP41 horizontal kits for not segregated structures Segregated structures(1) Dimensions (mm) Description 12 DIN mod. No.4 IP41 horizontal kits for segregated structures 24 DIN mod. No.4 IP41 horizontal kits for segregated structures 36 DIN mod. No.4 IP41 horizontal kits for segregated structures (1) > Rapid selection table page 5/6 To complete with universal segregation SH 4000, SH 6000, SH 8000 (see page 5/86). > In-depth technical information page 6/1 5/60 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Structure ≤300 800 Internal cable container for switchgear without segregation (opern frame) VC1624 VC1824 VC2024 Only to be ordered for the 36 DIN mod. structures (W=800mm). Consisting of a pair of functional uprights and a blind door complete with two key locks. Can be mounted either on the right or left. Dimensions (mm) Description H W Code Package/ No. of pieces Reduced framed for structures P≤300mm ≥225 800 VC1823 VC2023 SK1880 SK2080 Not segregated internal cable container 1600 200 VC1624 1/1 Not segregated internal cable container 1800 200 VC1824 1/1 Not segregated internal cable container 2000 200 VC2024 1/1 5 Standard framed for structures P≤300mm Not segregated internal cable container 1800 200 VC1823 1/1 Not segregated internal cable container 2000 200 VC2023 1/1 Rear riser for unsegregated internal cable container Kit consisting of 2 unsegregated functional frames and one blind door. The rear riser SK1880 (H=1800mm) and SK2080 (H=2000mm) in the unsegregated structures must be ordered separately if needed for fixing onto the rear of crosspieces, accessories, busbars, etc. Dimensions (mm) 800 ≥500 Description H Code Package/ No. of pieces Internal cable container rear riser 1800 SK1880 1/1 Internal cable container rear riser 2000 SK2080 1/1 Internal cable container for segregated switchgear (closed frame) VC1820 VC2020 Only to be ordered for the W=800mm structures. Kit consisting of 2 functional segregated frames, a blind door and a rear upright for fixing onto the back of crosspieces, accessories, busbars, etc. Can be mounted either on the right or left. Dimensions (mm) Description H W Code Package/ No. of pieces Internal cable container for segregated switchgear D≥500mm > Rapid selection table page 5/6 Segregated cable container 1800 200 VC1820 1/1 Segregated cable container 2000 200 VC2020 1/1 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/61 ArTu K Modular Structures Ordering codes VC.... STRUCTURES WITHOUT SEGREGATION/SEGREGATED Structure Base-Header-Plinth for external cable container SK1600 SK1800 SK2000 VC.... 5 Pre-mounted structure complete with cable entry flanges, plinth channels and front flanges – the lateral ones must be ordered separately. Dimensions (mm) Description D W Code Package/ No. of pieces Base, top and base strip for external cable container 150 300 VC3025 1/1 Base, top and base strip for external cable container 225 300 VC3040 1/1 Base, top and base strip for external cable container 300 300 VC3050 1/1 Base, top and base strip for external cable container 500 300 VC3060 1/1 Base, top and base strip for external cable container 700 300 VC3080 1/1 Base, top and base strip for external cable container 900 300 VC3010 1/1 Front and rear coverings for additional cable container PO..24 PO..31 The additional cable container can be completed in the following ways: - IP65 version with external door (internal optional) - IP31 version with internal door and finishing section (see table on page 5/58). IP31 Internal door PO..23 PO..33 RF.... Dimensions (mm) Description H W Code Package/ No. of pieces Internal door for cable container 1600 300 PO1631 1/1 Internal door for cable container 1800 300 PO1831 1/1 Internal door for cable container 2000 300 PO2031 1/1 W Code Package/ No. of pieces External door for cable container 1600 300 PO1633 1/1 External door for cable container 1800 300 PO1833 1/1 External door for cable container 2000 300 PO2033 1/1 IP65 External door Dimensions (mm) Description H IP65 Rear panel Dimensions (mm) > Rapid selection table page 5/6 Description H W Code Package/ No. of pieces Rear panel for external cable container 1600 300 RF1630 1/1 Rear panel for external cable container 1800 300 RF1830 1/1 Rear panel for external cable container 2000 300 RF2030 1/1 > In-depth technical information page 6/1 5/62 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Kit for apparatus Reduced frames for switchboards D=150 and for Tmax ≤ T6 200 Dimensions (mm) W Code Package/ No. of pieces GD4002 1/1 GD6011 1/1 GD6002 1/1 GD6008 1/1 12 DIN mod. - W=390mm DIN rail kit (aluminium) 300 GD6010 GD8010 DIN rail kit Description 200 GD6008 GD6009 GD6011 300 150 GD4002 GD6002 GD8002 GD1000 DIN rail kits for System Pro-M modular, Tmax T1- T2-T3, moulded-case circuitbreakers and support for Unifix H 390 DIN rail kit interaxis 150mm (2 DIN rows) 5 24 DIN mod. - W=600mm AD1061 DIN rail kit (aluminium) DIN rail kit interaxis 150mm (2 DIN rows) Standard frames for switchboards (excluding D=150mm) 600 DIN rail kit reinforced for Tmax RC GD6010 1/1 DIN rail kit with accessories GC6002 (1) 1/1 GD8002 1/1 GD6009 1/1 DIN rail kit reinforced for Tmax RC GD8010 1/1 DIN rail kit with accessories GC8002 (1) 1/1 GD1000 1/1 36 DIN mod. - W=800mm DIN rail kit (aluminium) DIN rail kit interaxis 150mm (2 DIN rows) 800 48 DIN mod. - W=1000mm DIN rail kit (aluminium) (1) 1000 The DIN rail Kit with accessories includes the 60x80 wiring duct and relative fixing supports AD1037. Supports for Unifix H Dimensions (mm) > Rapid selection table page 5/6 Description H Code Package/ No. of pieces Fixing supports for Unifix H series for panel H=300mm 600/800 AD1061 1/1 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/63 ArTu K Modular Structures Ordering codes STRUCTURES WITHOUT SEGREGATION/SEGREGATED Kit for apparatus Modular panel Steel sheet panels complete with hinges placed on the right or left Dimensions (mm) Description H W Code Package/ No. of pieces PM2424 1/1 PM3424 1/1 12 DIN mod. Modular panel 1 DIN row 200 Modular panel 2 DIN rows 300 390 24 DIN mod. 5 Modular panel 1 DIN row 200 PM2624 1/1 Modular panel 1 DIN row - Tmax RC 300 PM2312 1/1 Modular panel 1 DIN row only for Unifix H 300 PM3624 1/1 Modular panel 2 DIN rows interaxis 150mm 300 PM3648 1/1 Modular panel 3 DIN rows 600 PM6672 1/1 Modular panel 1 DIN row 200 PM2836 1/1 Modular panel 1 DIN row - Tmax RC 300 PM2315 1/1 PM3836 1/1 PM3872 1/1 PM2010 1/1 600 36 DIN mod. Modular panel 1 DIN row only for Unifix H 300 Pannello modulare 2 file DIN 300 800 48 DIN mod. Modular panel 1 DIN row 200 1000 Width 600mm Width 600/800/1000mm PM3648/PM3872 PM6672 PM2624/PM2836/PM2010 = 74,5 99,5 199 150 299 74,5 = 200 432/634/834 599 596/796/996 432/634 596/796 200 Version for Tmax with mod. diff. Version for Unifix H PM2312/PM2315 PM3624/PM3836 99,5 432 99.5 > Rapid selection table page 5/6 299 5/64 1STC008001D0204 | Technical catalogue = 432/634 432/634 596/796 596/796 > In-depth technical information page 6/1 596 = 299 199.5 > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Kit for apparatus Panels for square measuring instruments Steel sheet panels complete with hinges placed on the right or left. Dimensions (mm) Description H W Code Package/ No. of pieces PS2720 1/1 PS2960 1/1 PS4720 1/1 PS4960 1/1 PS2728 1/1 PS2968 1/1 PS4728 1/1 PS4968 1/1 PS2017 1/1 PS2019 1/1 24 DIN mod - W=600mm Panel for 2 instruments 72x72mm Panel for 2 instruments 72x72mm Panel for 4 instruments 72x72mm 200 600 Panel for 4 instruments 96x96mm 5 36 DIN mod - W=800mm Panel for 2 instruments 72x72mm Panel for 2 instruments 72x72mm Panel for 4 instruments 72x72mm 200 800 Panel for 4 instruments 96x96mm 48 DIN mod. - L=1000mm Panel for 4 instruments 72x72mm Panel for 4 instruments 96x96mm 200 1000 Leght 600/800/1000mm PS4720/PS4728/PS4960/PS4968/ PS2017/PS2019 68 PS2720/PS2728/PS2960/PS2968 68 92 92 68 92 199 68 199 92 596/796 596/796/996 Accessories for panels EV1135 EV1136 AD1600 AD1800 LU C I G MA AZZ AD1086 AD1088 AD1089 INO AD1101÷AD1104 Description Code Package/ No. of pieces No. 10 holes covers W=2000mm grey RAL 7035 colour AD1086 1/10 No. 3 holes covers 36 Din modules grey RAL 7035 colour AD1088 1/3 No. 3 holes covers 36 Din modules grey RAL 7035 colour AD1089 1/3 No. 10 closing caps for instrument panel 72x72mm EV1135 1/10 No. 5 closing caps for instrument panel 96x96mm EV1136 1/5 No. 20 label-holders 12 DIN mod. AD1390 1/20 No. 20 label-holders 24 DIN mod. AD1600 1/20 No. 20 label-holders 36 DIN mod. AD1800 1/20 No. 288 labels 1 mod. 15x17mm (HxW) AD1101 (1) 1/288 No. 192 labels 2 mod. 15x27mm (HxW) AD1102 (1) 1/192 No. 96 labels 3 mod. 15x50mm (HxW) AD1103 (1) 1/96 No. 96 labels 4 mod. 15x67mm (HxW) AD1104 (1) 1/96 (1) > Rapid selection table page 5/6 Labels can be written with Grafoplast compatible plotter system. > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/65 ArTu K Modular Structures Ordering codes 05087 (60x80) AD1009 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Kit for apparatus Ducts supports 05087(60x80) GD6002 GD8002 OFF OFF OFF 05087 (60x80) OFF OFF OFF OFF Description Code Package/ No. of pieces No.4 plastic supports for horizontal duct AD1009 1/4 No.4 metal supports for horizontal duct AD1037 1/4 Depth adapters OFF OFF OFF GD6008 GD6009 OFF OFF OFF OFF OFF 5 Enables the depth of miniature circuit-breakers to be adapted to that of moulded-case circuit-breakers mounted on the same DIN rail. 05085(40x80) OFF OFF OFF Dimensions (mm) OFF OFF OFF OFF OFF OFF OFF OFF Description W Code Package/ No. of pieces No.1 depth adapter for Tmax T1-T2-T3 floor-standing 600 AP6000 1/1 OFF 05087(60x80) AD1037 OFF OFF OFF > Rapid selection table page 5/6 AP6000 GD6002 GD8002 > In-depth technical information page 6/1 5/66 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Kit for apparatus PC.... Blind, recessed and ventilated panels for general apparatus Dimensions (mm) H Code Package/ No. of pieces Blind panel 100 PC1400 1/1 Blind panel 200 PC2400 1/1 Blind panel 300 PC3400 1/1 400 PC4400 1/1 Blind panel 600 PC6400 1/1 Blind panel 1800 PC1840 1/1 Blind panel 2000 PC2040 1/1 Blind panel 100 PC1600 1/1 Blind panel 200 PC2600 1/1 Blind panel 300 PC3600 1/1 Blind panel 400 PC4600 1/1 Blind panel 600 PC6600 1/1 Blind panel 800 PC8600 1/1 Blind panel 1600 PC1660 1/1 1800 PC1860 1/1 Blind panel 2000 PC2060 1/1 Blind recessed panel 200 PR2600 1/1 Blind recessed panel 400 PR4600 1/1 Blind recessed panel 600 PR6600 1/1 Ventilated panel 100 PA1600 1/1 Ventilated panel 200 PA2600 1/1 Blind panel 100 PC1800 1/1 Blind panel 200 PC2800 1/1 Blind panel 300 PC3800 1/1 Blind panel 400 PC4800 1/1 Blind panel 600 PC6800 1/1 Blind panel 800 PC8800 1/1 1600 PC1680 1/1 Blind panel 1800 PC1880 1/1 Blind panel 2000 PC2080 1/1 Blind recessed panel 200 PR2800 1/1 Blind recessed panel 400 PR4800 1/1 Blind recessed panel 600 PR6800 1/1 Blind panel 100 PC1210 1/1 Blind panel 200 PC1220 1/1 Blind panel 300 PC1230 1/1 Blind panel 400 PC1240 1/1 500 PC1250 1/1 Blind panel 600 PC1260 1/1 Ventilated panel 100 PA1010 1/1 Ventilated panel 200 PA2010 1/1 Description PR.... PA.... W 12 DIN mod. - W=390mm Blind panel 390 5 24 DIN mod. - W=600mm Blind panel 600 36 DIN mod. - W=800mm Blind panel 800 48 DIN mod. - W=1000mm Blind panel > Rapid selection table page 5/6 > In-depth technical information page 6/1 1000 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/67 ArTu K Modular Structures Ordering codes STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with reduced frame Kit for apparatus KT.... KX.... KL.... Kit for installing Tmax circuit-breakers front terminals Horizontal installation (front terminals) Dimensions (mm) Description H W Code Package/ No. of pieces 1/1 24 DIN mod. - W=600mm 5 Kit for T1 3/4 poles fixed 200 KT1117 Kit for T1 4 poles fixed + RC mod. 200 KT1102(1) 1/1 Kit for T2 3/4 poles fixed 200 KT2117 1/1 Kit for T2 4 poles fixed + RC mod. 200 KT2102 1/1 Kit for T3 3/4 poles fixed 200 KT3112 1/1 Kit for T3 4 poles fixed + RC mod. 300 KT3102 1/1 Kit for T4 3/4 poles fixed 200 KT4112 1/1 Kit for T4 4 poles fixed + RC mod. 200 KT4110 1/1 Kit for T5 3/4 poles fixed 300 KT5112 1/1 Kit for T5 4 poles fixed + RC mod. 300 KT5110 1/1 Kit for T6 3/4 poles fixed 500 600 KT6113 1/1 (2) 200 KX1617 1/1 Kit for XT1 4 poles fixed + RC mod. 200 KX1602 1/1 Kit for XT2 3/4 poles fixed KX2619(2) 1/1 Kit for XT2 4 poles fixed + RC mod. 200 KX2602 1/1 Kit for XT3 3/4 poles fixed KX3612(2) 1/1 Kit for XT3 4 poles fixed + RC mod. 300 KX3602 1/1 Kit for XT4 3/4 poles fixed KX4612(2) 1/1 KX4610 1/1 Kit for XT1 3/4 poles fixed 200 200 200 Kit for XT4 4 poles fixed + RC mod. 200 36 DIN mod. - W=800mm Kit for T2 4 poles fixed + RC mod. 200 KL2103 1/1 Kit for T3 3/4 poles fixed 200 KL3113 1/1 Kit for T3 4 poles fixed + RC mod. 300 KL3103 1/1 Kit for T4 3/4 poles fixed 200 KL4115 1/1 Kit for T4 4 poles fixed + RC mod. 200 KL4116 1/1 Kit for T5 3/4 poles fixed 300 KL5114 1/1 Kit for T5 4 poles fixed + RC mod. 300 KL5116 1/1 Kit for T6 3/4 poles fixed 500 KL6113 Kit for XT3 3/4 poles fixed > Rapid selection table page 5/6 800 1/1 (2) 1/1 200 KL3613 Kit for XT3 4 poles fixed + RC mod. 300 KX3603 1/1 Kit for XT4 3/4 poles fixed KX4615(2) 1/1 200 (1) Version for Tmax with differential module underplaced RC 221/222. (2) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for platemounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for platemounting, AD3308 XT4 3P Flange for plate-mounting. > In-depth technical information page 6/1 5/68 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with reduced frame Kit for apparatus KT.... KX.... KL.... Kit for installing Tmax circuit-breakers Vertical installation (front terminals) Dimensions (mm) Description H W Code Package/ No. of pieces 24 DIN mod. - W=600mm GD.... Kit for DIN T1-T2-T3-XT1-XT3, 3/4 poles fixed + RC mod. 200/600 GD…(1) 1/1 Kit for T3 3/4 poles fixed 300 KT3212 1/1 Kit for T4 3/4 poles fixed 400 KT4212 1/1 Kit for T4 4 poles fixed + RC mod. 500 KT4102 1/1 Kit for T5 3/4 poles fixed 400 KT5212 1/1 Kit for T5 3/4 poles fixed + RC mod. 500 KT5102 1/1 Kit for T6 3/4 poles fixed 500 KT6213 Kit for XT1 3/4 poles fixed 200 Kit for XT1 4 poles fixed + RC mod. 300 Kit for XT1 No. 3 CBs side by side 1/1 (4) KX1618 600 5 1/1 KX1603 1/1 200 KX1604(4) 1/1 Kit for XT2 No. 3/4(3) CBs side by side 200 KX2604(2) 1/1 Kit for XT3 3/4 poles fixed 300 KX3614(4) 1/1 Kit for XT3 4 poles fixed + RC mod. 300 KX3609 1/1 Kit for XT4 3/4 poles fixed 300 KX4614(4) 1/1 Kit for XT4 No. 3/4(3) CBs side by side 300 KX4604(2) 1/1 Kit for XT4 4 poles fixed + RC mod. 400 KX4602 1/1 Kit for DIN T1-T2-T3-XT1-XT3, 3/4 poles fixed + RC mod. 200/600 GD…(1) 1/1 Kit for T5 3/4 poles fixed 400 KL5212 1/1 Kit for T5 3/4 poles fixed + RC mod. 500 KL5102 1/1 Kit for T6 3/4 poles fixed 500 KL6213 1/1 36 DIN mod. - W=800mm > Rapid selection table page 5/6 800 (1) For the selection of kit for installation on DIN rail see page 5/63. (2) Order polished flange AD3310, AD3311, AD3312, AD3313 see page 5/16. (3) No. 4 CBs side by side 3P, No. 3 CBs side by side 4P. (4) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for platemounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for platemounting, AD3308 XT4 3P Flange for plate-mounting. > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/69 ArTu K Modular Structures Ordering codes Orizzontale STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with reduced frame Kit for apparatus Kit for OT160÷400 Dimensions (mm) Code Package/ No. of pieces H W Control Kit for OT160/200/250/315/400 vertical installation 300 600 Decentralized KO2260 1/1 Kit for OT160/200/250/315/400 horizontal installation 300 600 Decentralized KO2261 1/1 Kit for OT160/200/250/315/400 vertical installation 300 800 Decentralized KO2280 1/1 Kit for OT160/200/250/315/400 horizontal installation 300 800 Decentralized KO2281 1/1 Description 24 DIN mod. - W=600mm Verticale 5 36 DIN mod. - W=800mm Blind back plates for general apparatus Dimensions (mm) H Code Package/ No. of pieces Blind back plate 200 PF2610 1/1 Blind back plate 400 PF4610 1/1 200 FR2601 1/1 400 FR4601 1/1 Blind back plate 200 PF2810 1/1 Blind back plate 400 PF4810 1/1 200 FR2801 1/1 400 FR4801 1/1 Description W 24 DIN mod. - W=600mm PF.... Blind recessed back plate 600 Blind recessed back plate 36 DIN mod. - W=800mm FR.... Blind recessed back plate 800 Blind recessed back plate The panels must be ordered separately. > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/70 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 KT.... KX.... STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frame D≥225mm Kit for apparatus Kit for installing Tmax circuit-breakers Horizontal installation (front or rear terminals) Dimensions (mm) Description H W Code Package/ No. of pieces 12 DIN mod. - W=390mm Kit for T1 3/4 poles fixed 200 KT1411 1/1 Kit for T1 4 poles fixed + RC mod. 200 KT1401 1/1 Kit for T2 3/4 poles fixed 200 KT2411 1/1 Kit for T2 4 poles fixed + RC mod. 200 KT2401 1/1 Kit for T2 3/4 poles plug-in 200 KT2421 1/1 Kit for T3 3/4 poles fixed 200 KT3419 1/1 Kit for T3 4 poles fixed + RC mod. 300 KT3401(*) 1/1 Kit for T3 3/4 poles plug-in 200 KT3421 1/1 Kit for T4 3/4 poles fixed 200 KT4411 1/1 Kit for T5 3/4 poles fixed 300 KT5411 1/1 Kit for T7 3/4 poles fixed 400 KT7110(**) 1/1 Kit for XT1 3/4 poles fixed 200 KX1419(2) 1/1 Kit for XT1 4 poles fixed + RC mod. 200 KX1401(*)(1) 1/1 Kit for XT2 3/4 poles fixed 200 KX2411(2) 1/1 Kit for XT3 3/4 poles fixed 200 KX3411 (2) 1/1 Kit for XT4 3/4 poles fixed 200 KX4411(2) 1/1 1/1 390 5 24 DIN mod. - W=600mm Kit for T1 3/4 poles fixed (CM) 200 KT1111 Kit for T1 4 poles fixed + RC mod. 200 KT1101(*)(1) 1/1 Kit for T1 3/4 poles fixed (MRD) 200 KT1112 1/1 1/1 Kit for T2 3/4 poles fixed (CM) 200 KT2111 Kit for T2 4 poles fixed + RC mod. 200 KT2101(*) 1/1 Kit for T2 3/4 poles plug-in 200 KT2121 1/1 Kit for T2 3/4 poles fixed (MRD) 200 KT2112 1/1 Kit for T3 3/4 poles fixed (CM) 200 KT3119 1/1 Kit for T3 3/4 poles fixed (I-IM) 500 KT3131(**) 600 KT3101 1/1 (*) Kit for T3 4 poles fixed + RC mod. 300 Kit for T3 3/4 poles fixed (MRD) 200 KT3114 1/1 Kit for T3 3/4 poles plug-in (CM) 200 KT3121 1/1 Kit for T3 3/4 poles plug-in (MRD) 200 KT3116 1/1 Kit for T4 3/4 poles fixed (MRD-CM) 200 KT4111 1/1 Kit for T4 4 poles fixed + RC mod. 200 KT4101 1/1 Kit for T4 3/4 poles plug-in 1/1 200 KT4122 1/1 Kit for T4 3/4 poles withdrawable (MRD) 300 KT4127 1/1 Kit for T4 3/4 poles withdrawable (CM) KT4125 1/1 300 CONTINUED (*) Only front terminals; (**) Only rear terminals. (1) Version for Tmax with differential module underplaced RC 221/222. (2) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for plate-mounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for plate-mounting, AD3308 XT4 3P Flange for plate-mounting. (DRH) = Direct rotary handle; (MO) = Motor operator; (I) = Interlocked; (IM) = Interlocked motor operated. > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/71 ArTu K Modular Structures Ordering codes KT.... KX.... STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frame D≥225mm Kit for apparatus Kit for installing Tmax circuit-breakers Horizontal installation (front or rear terminals) Dimensions (mm) KI.... Description H W Code Package/ No. of pieces 24 DIN mod. - W=600mm 5 Kit for T4 3/4 poles fixed/withdrawable (I-IM) 600 KI4114(**) 1/1 Kit for T4 3/4 poles plug-in (I-IM) 600 KI4115(**) 1/1 Kit for T5 3/4 poles fixed (MRD-CM) 300 KT5111 1/1 Kit for T5 4 poles fixed + RC mod. 300 KT5101 1/1 Kit for T5 (400A) 3/4 poles plug-in 300 KT5120 1/1 Kit for T5 (630A) 3/4 poles plug-in 300 KT5121 1/1 Kit for T5 (400A) 3/4 poles plug-in (MRD) 300 KT5130 1/1 Kit for T5 (630A) 3/4 poles plug-in (MRD) 300 KT5131 1/1 Kit for T5 (400A) 3/4 poles plug-in (CM) 300 KT5134 1/1 Kit for T5 (630A) 3/4 poles plug-in (CM) 300 KT5135 1/1 Kit for T5 3/4 poles fixed/withdrawable (I-IM) 600 KI5114(**) 1/1 Kit for T5 3/4 poles plug-in (I-IM) 600 KI5115(**) 1/1 Kit for T6 3/4 poles fixed 500 KT6111 1/1 Kit for T6 3/4 poles plug-in (MRD) 500 KT6131 1/1 Kit for T6 3/4 poles fixed (MRD) 500 KT6112 1/1 Kit for T6 3/4 poles fixed (CM) 500 KT6115 1/1 Kit for T6 3/4 poles plug-in (CM) 500 KT6114 1/1 Kit for T6 3/4 poles fixed (I) 800 KT6116(**) 1/1 Kit for T6 3/4 poles fixed (IM) 800 KT6117(**) 1/1 Kit for T6 3/4 poles plug-in (I) 800 KT6118 (**) 1/1 Kit for T6 3/4 poles plug-in (IM) 800 KT6119(**) 1/1 Kit for T7 3/4 poles fixed 400 Kit for T7M 3/4 poles fixed (CM) 400 KT7111(3) 1/1 600 Kit for T7M 3/4 poles plug-in 500 KT7560 1/1 Kit for XT1 3/4 poles fixed 200 KX1611(2) 1/1 Kit for XT1 4 poles fixed + RC mod. 200 KX1609 1/1 Kit for XT1 3/4 poles plug-in 200 KX1621(2) 1/1 Kit for XT1 3/4 poles fixed (MRD) 200 KX1605 1/1 Kit for XT1 3/4 poles fixed (CM) 200 KX1607 1/1 Kit for XT1 3/4 poles fixed/withdrawable (I) 500 KX1622 1/1 Kit for XT1 3/4 poles fixed/withdrawable (IM) 500 KX1608 1/1 (2) 200 KX2611 Kit for XT2 4 poles fixed + RC mod. 200 KX2601 1/1 Kit for XT2 3/4 poles plug-in 200 KX2621(2) 1/1 Kit for XT2 3/4 poles plug-in 300 KX2631(2) 1/1 (*) Only front terminals; (**) Only rear terminals. CONTINUED (1) Versione per Tmax modulo differenziale sottoposto RC 221/222. (2) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for plate-mounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for plate-mounting, AD3308 XT4 3P Flange for plate-mounting. (3) If used with rotary handle, use the protruding door PV..63 and PV..83. (DRH) = Direct rotary handle; (MO) = Motor operator; (I) = Interlocked; (IM) = Interlocked motor operated. > Rapid selection table page 5/6 1/1 Kit for XT2 3/4 poles fixed > In-depth technical information page 6/1 5/72 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 KT.... KX.... KL.... STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frame D≥225mm Kit for apparatus Kit for installing Tmax circuit-breakers Horizontal installation (front or rear terminals) Dimensions (mm) Description H W Code Package/ No. of pieces 24 DIN mod. - W=600mm Kit for XT2 4 poles fixed + RC mod. 300 KX2634(3) 1/1 Kit for XT2 3/4 poles fixed (MRD) 200 KX2605 1/1 Kit for XT2 3/4 poles fixed (CM) 200 KX2607 1/1 Kit for XT2 3/4poles fixed/withdrawable (I) 500 KX2622 1/1 Kit for XT2 3/4poles fixed/withdrawable (CM) 500 KX2608 1/1 Kit for XT2 3/4 poli estraibile (MRD) 500 KX2632 1/1 Kit for XT3 3/4 poles fixed 200 KX3611(2) 1/1 Kit for XT3 4 poles fixed + RC mod. 300 KX3601 1/1 Kit for XT3 3/4 poles plug-in 200 KX3621(2) 1/1 Kit for XT3 3/4 poles fixed (MRD) 200 KX3605 1/1 Kit for XT3 3/4 poles fixed (CM) 200 KX3607 1/1 Kit for XT3-XT1 3/4 poles fixed (I) 500 KX1131(2) 1/1 Kit for XT3 3/4 poles fixed (I) 500 KX3131(2) 1/1 Kit for XT3-XT1 3/4 poles fixed (IM) 500 (2) KX1132 1/1 Kit for XT3 3/4 poles fixed (IM) 500 KX3132(2) 1/1 Kit for XT4 3/4 poles fixed 200 KX4611(2) 1/1 Kit for XT4 4 poles fixed + RC mod. 200 KX4601 1/1 Kit for XT4 3/4 poles plug-in 200 KX4622(2) 1/1 Kit for XT4 3/4 poli estraibile 300 (2) KX4627 1/1 Kit for XT4 4 poles fixed + RC mod. 300 KX4633(4) 1/1 Kit for XT4 3/4 poles fixed (CM) 200 KX4607(2) 1/1 Kit for XT4 3/4 poles fixed (I) 500 KX4141(2) 1/1 Kit for XT4 3/4 poles fixed (IM) 500 KX4142(2) 1/1 Kit for XT4 3/4 poles fixed (MRD) 200 KX4606(2) 1/1 Kit for XT4 3/4 poli estraibile (MRD) 300 KX4632 1/1 Kit for T1 4 poles fixed + RC mod. 200 KL1102(*)(2) 1/1 Kit for T2 4 poles fixed + RC mod. 200 KL2104(*) 1/1 Kit for T3 3/4 poles fixed 200 KL3114 1/1 Kit for T3 4 poles fixed + RC mod. 300 KL3104(*) 1/1 Kit for T5 3/4 poles fixed 300 KL5115 1/1 Kit for T5 4 poles fixed + RC mod. 300 KL5101 1/1 Kit for T7 3/4 poles fixed 400 KL7112 1/1 Kit for XT1 4 poles fixed + RC mod. 200 KX1801 1/1 Kit for XT2 4 poles fixed + RC mod. 200 KX2801 1/1 Kit for XT3 3/4 poles fixed 200 KX3811(2) 1/1 Kit for XT3 4 poles fixed + RC mod. 300 KX3801 1/1 600 5 36 DIN mod. - W=800mm 800 (*) Only front terminals; (**) Only rear terminals. (1) Version for Tmax with differential module underplaced RC 221/222. (2) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for plate-mounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for plate-mounting, AD3308 XT4 3P Flange for plate-mounting. (4) withdrawable + differential module underplaced. (DRH) = Direct rotary handle; (MO) = Motor operator; (I) = Interlocked; (IM) = Interlocked motor operated. > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/73 ArTu K Modular Structures Ordering codes GD.... KT.... STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frame D≥225mm Kit for apparatus Kit for installing Tmax circuit-breakers Vertical installation (front or rear terminals) Dimensions (mm) Description H W Code Package/ No. of pieces 12 DIN mod. - W=390mm 5 Kit DIN T1-T2-T3-XT1-XT3, 3/4 P fixed + RC mod. 200÷600 GD....(1) 1/1 Kit for T3 3/4 poles fixed 300 KT3416 1/1 Kit for T3 3/4 poles plug-in 400 KT3426 1/1 Kit for T4 3/4 poles fixed 400 KT4412 1/1 Kit for T5 3/4 poles fixed 400 KT5412 1/1 Kit for T5 4 poles fixed + RC mod. 500 KT5401 1/1 Tmax XT3 3/4 poles fixed 300 KX3412(2) 1/1 300 KX4412 (2) 1/1 Kit DIN T1-T2-T3-XT1-XT3, 3/4 P fixed + RC mod. 200÷600 GD....(1) 1/1 Kit for T3 3/4 poles fixed 300 KT3211 1/1 Kit for T3 3/4 poles plug-in 400 KT3221 1/1 Tmax XT4 3/4 poles fixed 390 24 DIN mod. - W=600mm Kit for T4 3/4 poles fixed (MRD-CM) 400 KT4211 1/1 Kit for No.3 T4 3/4 poles fixed 400 KT4116 1/1 Kit for T4 4 poles fixed + RC mod.. 500 KT4103 1/1 Kit for T4 3/4 poles plug-in 400 KT4221 1/1 Kit for T4 3/4 poles withdrawable (MRD) 400 KT4231 1/1 Kit for T4 3/4 poles withdrawable (CM) 400 KT4126 1/1 Kit for T5 3/4 poles fixed (MRD-CM) 400 KT5211 1/1 Kit for T5 4 poles fixed + RC mod.. 500 KT5103 1/1 Kit for No.2 T5 3/4 poles fixed 400 KT5214 1/1 Kit for No.2 T5 3/4 poles fixed + RC mod.. 500 KT5117 1/1 Kit for T5 (400A) 3/4 poles plug-in 400 KT5222 1/1 Kit for T5 (630A) 3/4 poles plug-in 400 KT5221 1/1 Kit for T5 (400A) 3/4 poles withdrawable (MRD) 400 KT5232 1/1 Kit for T5 (400A) 3/4 poles withdrawable (CM) 400 KT5138 1/1 Kit for T5 (630A) 3/4 poles withdrawable (CM) 500 KT5139 1/1 Kit for T5 (630A) 3/4 poles withdrawable (MRD) 500 KT5231 1/1 Kit for T6 3/4 poles fixed 500 KT6211 1/1 600 For the selection of kit for installation on DIN rail see page 5/63. ((2) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for plate-mounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for plate-mounting, AD3308 XT4 3P Flange for plate-mounting. (DRH) = Direct rotary handle; (MO) = Motor operator; (I) = Interlocked; (IM) = Interlocked motor operated. > Rapid selection table page 5/6 CONTINUED (1) > In-depth technical information page 6/1 5/74 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 GD.... KT.... KX.... KL.... STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frame D≥225mm Kit for apparatus Kit for installing Tmax circuit-breakersx Vertical installation (front or rear terminals) Dimensions (mm) Description H W Code Package/ No. of pieces KT6122 1/1 24 DIN mod. - W=600mm Kit for T6 3/4 poles withdrawable 500 Kit for T6 3/4 poles fixed (MRD) 500 KT6120 1/1 Kit for T6 3/4 poles fixed (CM) 500 KT6121 1/1 Kit for T6 3/4 poles withdrawable (CM) 500 KT6123 1/1 500 KT7211(5) 1/1 KT7231 1/1 Kit for T7 3/4 poles fixed Kit for T7M 3/4 poles fixed (CM-I-IM) 5 Kit for T7 3/4 poles withdrawable Kit for T7M 3/4 poles withdrawable (CM-I-IM) 500 Kit for XT4 No. 3/4(4) CBs side by side 200 KX2612(3) 1/1 Kit for XT3 3/4 poles fixed 300 KX3613(2) 1/1 Kit for XT4 3/4 poles fixed 300 KX4617(2) 1/1 Kit for XT4 4 poles fixed + RC mod. 400 KX4603 1/1 Kit for XT4 No. 2 CBs side by side 300 KX4616(2) 1/1 Kit for XT2/XT4 3/4 poles fixed (I) 400 KX2412 1/1 Kit DIN T1-T2-T3-XT1-XT3, 3/4 poles fixed + RC mod. 200÷600 GD....(1) 1/1 Kit for T3 3/4 poles fixed 300 KL3212 1/1 1/1 600 36 DIN mod. - W=800mm Kit for No.4 T4 3/4 poles fixed 400 KL4118 Kit for T5 3/4 poles fixed 400 KL5213 1/1 Kit for T5 4 poles fixed + RC mod. 500 KL5103 1/1 Kit for No.3 T5 3/4 poles fixed 400 KL5214 1/1 Kit for No.3 T5 3/4 poles fixed + RC mod. 500 KL5117 1/1 Kit for T6 3/4 poles fixed 500 KL6214 1/1 1/1 800 Kit for No.2 T6 3/4 poles fixed 500 KL6124 Kit for T7 3/4 poles fixed 500 KL7212 1/1 Kit for T7 3/4 poles withdrawable 500 KL7213 1/1 Kit for T8 3/4 poles fixed 800 KT8211 1/1 (2) 1/1 1/1 Kit for XT3 3/4 poles fixed 300 KX3812 Kit for XT4 No. 3 CBs side by side 300 KX4818(2) (1) For the selection of kit for installation on DIN rail see page 5/63. (2) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for plate-mounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for plate-mounting, AD3308 XT4 3P Flange for plate-mounting. (3) Order polished flange AD3310, AD3311, AD3312, AD3313 see page 5/16. (4) No. 4 CBs side by side 3P, No. 3 CBs side by side 4P. (5) If used with rotary handle, use the protruding door PV..63 and PV..83. (DRH) = Direct rotary handle; (MO) = Motor operator; (I) = Interlocked; (IM) = Interlocked motor operated. > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/75 ArTu K Modular Structures Ordering codes STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frame D≥225mm Kit for apparatus Kit for installing Emax circuit-breakers X1, E1, E2, E3, E4, E6 Description Vertical installation 24 DIN mod. - W=600mm Kit for X1 3/4 poles fixed Kit for X1 3/4 poles withdrawable Kit for E1-E2-E3 3/4 poles fixed Kit for E1-E2 -E3 3/4 poles withdrawable 5 36 DIN mod. - W=800mm Kit for X1 3/4 poles fixed Kit for X1 3/4 poles withdrawable Kit for E3 3/4 poles fixed Kit for E3 3/4 poles withdrawable Kit for E4 3/4 poles fixed (I) neutral 50% Kit for E4 3/4 poles withdrawable (I) neutral 50% 48 DIN mod. - W=1000mm Kit for E4 4 poles fixed 100% neutral Kit for E4 4 poles withdrawable 100% neutral Kit for E6 3/4 poles fixed 50% neutral Kit for E6 3/4 poles withdrawable 50% neutral Dimensions (mm) H W Code Package/ No. of pieces 500 500 600 KT7211 KT7231 KE3215 (1) 1/1 1/1 1/1 600 KE3235 (1) 1/1 500 500 600 600 600 600 800 KL7212 KL7213 KE4215 (2) KE4235 (2) KE5215 (2) KE5235 (2) 1/1 1/1 1/1 1/1 1/1 1/1 1000 KE4000 KE5237 KE6342 KE6341 1/1 1/1 1/1 1/1 600 600 600 600 600 (I) = Interlocked (1) Also for E1-E2 interlocked version. (2) Also for interlocked version. Kit for installing Emax 2 circuit-breakers Description Vertical installation 24 DIN mod. - W=600mm Kit for Emax E1.2 3/4 poles fixed Kit for Emax E1.2 3/4 poles withdrawable Kit for Emax E2.2 3/4 poles fixed (I) Kit for Emax E2.2 3/4 poles withdrawable (I) 36 DIN mod. - W=800mm Kit for Emax E1.2 3/4 poles fixed Kit for Emax E1.2 3/4 poles withdrawable Kit for Emax E2.2/E4.2 3/4 poles fixed (I) Kit for Emax E2.2/E4.2 3/4 poles withdrawable (I) 48 DIN mod. - W=1000mm Kit for Emax E6.2 3/4 poles fixed 50% neutral Kit for Emax E6.2 3/4 poles withdrawable 50% neutral Horizontal installation Dimensions (mm) H W Code Package/ No. of pieces 500 500 600 KN1556 (1) KN1356 KN2766 1/1 1/1 1/1 600 KN2566 1/1 500 500 600 600 800 KN1758 (1) KN1558 KN4168 (2) KN4768 (2) 1/1 1/1 1/1 1/1 600 600 1000 KN6361 (3) KN6161 (3) 1/1 1/1 KN1146 (1) 1/1 KN1156 1/1 KN1348 (1) 1/1 600 24 DIN mod. - W=600mm Kit for Emax E1.2 3/4 poles fixed 400 Kit for Emax E1.2 3/4 poles withdrawable 500 600 36 DIN mod. - W=800mm Kit for Emax E1.2 3/4 poles fixed 400 600 (I) = Interlocked (1) The E1.2 fixed with frontal terminals can be installed in an enclosure with D=300mm; the E1.2 fixed with rear terminals can be mounted in enclosures (2) with D=500mm For E4.2 (Fix./Interlocked or Withdrawable/Interlocked), use D=700mm (or D=900mm with proper intermediate uprights SK1881/ SK2081) for 3200A and D=900mm for 4000A. (3) E6.2 (Fix. or Withdrawable, not with interlock, “half sized” with N=50%) can be installed in only one enclosure with D=900mm, or in more structures coupled back to back (min. D=900). Only one E6.2 per column (D=900mm) can be installed, at a maximum height of H=1100mm; below this breaker it is not possible to install any other device. > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/76 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frame D≥225mm Kit for apparatus Horizontal Kit for OT160÷1600 Description 24 DIN mod. - W=600mm Kit for vertical OT160/200/250/315/400 Kit for horizontal OT160/200/250/315/400 Kit for vertical OT630/800 Kit for vertical OT1000-1600A 36 DIN mod. - W=800mm Kit for vertical OT160/200/250/315/400 Kit for horizontal OT160/200/250/315/400 Kit for vertical OT630/800 Vertical Dimensions (mm) H W Control Code Package/ No. of pieces 300 600 Decentralized KO2260 1/1 300 600 Decentralized KO2261 1/1 400 600 600 600 Decentralized Central KO3660 KO1250 1/1 1/1 300 800 Decentralized KO2280 1/1 300 800 Decentralized KO2281 1/1 400 800 Decentralized KO3680 1/1 5 Blind back plates for general apparatus Dimensions (mm) PF.... FR.... W H Code Package/ No. of pieces 390 200 300 400 600 PF2401 PF3403 PF4401 PF6401 1/1 1/1 1/1 1/1 200 300 PF2601 PF3601 1/1 1/1 Blind back plate 400 PF4601 1/1 Blind back plate 600 PF6601 1/1 Blind recessed back plate 200 FR2600 1/1 Blind recessed back plate 400 FR4600 1/1 Blind recessed back plate 600 FR6600 1/1 Blind back plate 200 PF2801 1/1 Blind back plate 300 PF3801 1/1 400 PF4801 1/1 600 PF6801 1/1 Blind recessed back plate 200 FR2800 1/1 Blind recessed back plate 400 FR4800 1/1 Blind recessed back plate 600 FR6800 1/1 Blind back plate 200 PF2100 1/1 Blind back plate 300 PF3100 1/1 400 PF4100 1/1 600 PF6100 1/1 Description 12 DIN mod. - W=390mm Blind back plate Blind back plate Blind back plate Blind back plate 24 DIN mod. - W=600mm Blind back plate Blind back plate 600 36 DIN mod. - W=800mm Blind back plate Blind back plate 800 48 DIN mod. - W=1000mm Blind back plate Blind back plate > Rapid selection table page 5/6 > In-depth technical information page 6/1 1000 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/77 ArTu K Modular Structures Ordering codes STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard frame D≥225mm Kit for apparatus Back plates Dimensions (mm) PF.... Description W H Code Package/ No. of pieces 24 DIN mod. - W=600mm Galvanised sheet back plate 600 Galvanised sheet back plate AD.... PF1806 1/1 PF2006 1/1 1800 PF1808 1/1 2000 PF2008 1/1 36 DIN mod. - W=800mm Galvanised sheet back plate 5 1800 2000 800 Galvanised sheet back plate Tracks for back plate Dimensions (mm) > Rapid selection table page 5/6 Description D Code Package/ No. of pieces Pair of tracks + crosspieces 225 AD1049 1/1 Pair of tracks + crosspieces 500 AD1050 1/1 Pair of tracks + crosspieces 700 AD1051 1/1 > In-depth technical information page 6/1 5/78 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 GD.... PF.... SEGREGATED STRUCTURES- Kit for switchgear with segregated frame D≥500mm Kit for apparatus DIN rail kit for System Pro-M modular, Tmax T1-T2-T3-XT1-XT3, moulded-case circuit-breakers DIN rail kit Dimensions (mm) Description W Code Package/ No. of pieces 390 GD4005 1/1 600 GD7005 1/1 800 GD9005 1/1 1000 GD1001 1/1 12 DIN mod. - W=390mm DIN rail kit (aluminium) 24 DIN mod. - W=600mm DIN rail kit (aluminium) 5 36 DIN mod. - W=800mm DIN rail kit (aluminium) 48 DIN mod. - W=1000mm DIN rail kit (aluminium) Blind back plates for general apparatus Dimensions (mm) H Code Package/ No. of pieces Blind back plate 200 PF2405 1/1 Blind back plate 300 PF3405 1/1 400 PF4405 1/1 600 PF6405 1/1 Blind back plate 200 PF2005 1/1 Blind back plate 300 PF3005 1/1 400 PF4005 1/1 Blind back plate 600 PF6005 1/1 Blind back plate 800 PF8005 1/1 Blind back plate 200 PF2805 1/1 Blind back plate 300 PF3805 1/1 Description W 12 DIN mod. - W=390mm Blind back plate 390 Blind back plate 24 DIN mod. - W=600mm Blind back plate 600 36 DIN mod. - W=800mm Blind back plate 800 400 PF4805 1/1 Blind back plate 600 PF6805 1/1 Blind back plate 800 PF8805 1/1 Blind back plate 200 PF2090 1/1 Blind back plate 300 PF3090 1/1 400 PF4090 1/1 600 PF6090 1/1 48 DIN mod. - W=1000mm Blind back plate Blind back plate > Rapid selection table page 5/6 > In-depth technical information page 6/1 1000 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/79 ArTu K Modular Structures Ordering codes KT.... KY.... SEGREGATED STRUCTURES- Kit for switchgear with segregated frame D≥500mm Kit for apparatus Kit for installing Tmax circuit-breakers Horizontal installation (rear terminals) KI.... 5 Dimensions (mm) H W Description 12 DIN mod. - W=390mm Code Package/ No. of pieces Kit for T1 3/4 poles fixed 200 KT1410 1/1 Kit for T2 3/4 poles fixed 200 KT2410 1/1 Kit for T2 3/4 poles plug-in 200 KT2420 1/1 Kit for T3 3/4 poles fixed 200 KT3410 1/1 Kit for T3 3/4 poles plug-in 200 KT3420 1/1 Kit for T4 3/4 poles fixed 200 KT4120 1/1 Kit for T5 3/4 poles fixed 300 Kit for XT1 3/4 poles fixed KT5122 1/1 200 KY1411(2) 1/1 Kit for XT2 3/4 poles fixed 200 KY2411(2) 1/1 Kit for XT2 3/4 poles plug-in 200 KY2421(2) 1/1 Kit for XT3 3/4 poles fixed 200 KY3411(2) 1/1 Kit for XT3 3/4 poles plug-in 300 KY3421(2) 1/1 Kit for XT4 3/4 poles fixed 200 KY4411(2) 1/1 390 24 DIN mod. - W=600mm Kit for T1 3/4 poles fixed 200 KT1110 1/1 Kit for T1 4 poles fixed + RC mod. 200 KT1100 1/1 Kit for T2 3/4 poles fixed 200 KT2110 1/1 Kit for T2 3/4 poles fixed (MRD) 200 KT2210 1/1 Kit for T2 3/4 poles plug-in 200 KT2120 1/1 Kit for T3 3/4 poles fixed 200 KT3110 1/1 Kit for T3 3/4 poles fixed (MRD) 200 KT3115 1/1 Kit for T3 3/4 poles plug-in 200 KT3120 1/1 Kit for T3 3/4 poles plug-in (MRD) 200 KT3124 1/1 Kit for T3 3/4 poles fixed (I-IM) 500 KT3132 1/1 Kit for T4 3/4 poles fixed (MRD) 200 KT4124 1/1 Kit for T4 3/4 poles fixed (CM) 200 KT4310 1/1 Kit for T4 3/4 poles plug-in 200 KT4113 1/1 Kit for T4 3/4 poles fixed and plug-in (I-IM) 600 KI4116 1/1 Kit for T4 3/4 poles plug-in (I-IM) 600 KI4119 1/1 Kit for T4 3/4 poles withdrawable (MRD) 300 KT4130 1/1 Kit for T4 3/4 poles withdrawable (CM) 300 KT4320* 1/1 Kit for T4 3/4 poles withdrawable (I) 600 KI4117 1/1 Kit for T4 3/4 poles withdrawable (IM) 600 KI4118 1/1 Kit for T5 3/4 poles fixed (MRD) 300 KT5136 1/1 Kit for T5 3/4 poles fixed (CM) 300 KT5310 1/1 Kit for T5 3/4 poles fixed and plug-in (I-IM) 600 KI5116 1/1 Kit for T5 3/4 poles plug-in (I-IM) 600 KI5119 1/1 Kit for T5 (400A) 3/4 poles plug-in 300 KT5420 1/1 Kit for T5 (630A) 3/4 poles plug-in 300 KT5421 1/1 Kit for T5 (400A) 3/4 poles withdrawable (MRD) 300 KT5430 1/1 Kit for T5 (630A) 3/4 poles withdrawable (MRD) 300 KT5431 1/1 600 CONTINUED * Only segregation Form 2 (1) If used with rotary handle, use the protruding door PV..63 and PV..83. (2) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for plate-mounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for plate-mounting, AD3308 XT4 3P Flange for plate-mounting. (DRH) = Direct rotary handle; (MO) = Motor operator; (I) = Interlocked; (IM) = Interlocked motor operated. > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/80 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 KT.... KY.... SEGREGATED STRUCTURES- Kit for switchgear with segregated frame D≥500mm Kit for apparatus Kit for installing Tmax circuit-breakers Horizontal installation (rear terminals) Dimensions (mm) KI.... Description H W Code Package/ No. of pieces 24 DIN mod. - W=600mm Kit for T5 (400A) 3/4 poles withdrawable (CM) 300 KT5320* 1/1 Kit for T5 (630A) 3/4 poles withdrawable (CM) 300 KT5321* 1/1 Kit for T5 3/4 poles withdrawable (I) 600 KI5117 1/1 Kit for T5 3/4 poles withdrawable (IM) 600 KI5118 1/1 Kit for T6 3/4 poles fixed 500 KT6110 1/1 Kit for T6 3/4 poles fixed (MRD) 500 KT6220 1/1 Kit for T6 3/4 poles fixed (CM) 500 KT6221 1/1 Kit for T6 3/4 poles fixed (I) 800 KT6142 1/1 Kit for T6 3/4 poles fixed (IM) 800 KT6143 1/1 Kit for T6 3/4 poles withdrawable 500 KT6130 1/1 Kit for T6 3/4 poles withdrawable (CM) 500 KT6134* 1/1 Kit for T6 3/4 poles withdrawable (I) 800 KT6144 1/1 Kit for T6 3/4 poles withdrawable (IM) 800 KT6145 1/1 400 KT7115(1) 1/1 Kit for T7M-X1 3/4 poles withdrawable 500 KT7561 1/1 Kit for XT1 3/4 poles fixed 200 KY1611(2) 1/1 Kit for XT1 poles fixed + RC mod. 200 KY1601 1/1 Kit for XT1 3/4 poles plug-in 200 KY1621(2) 1/1 Kit for XT1 3/4 poles fixed (MRD) 200 KY1605 1/1 Kit for XT1 3/4 poles fixed (CM) 200 KY1607 1/1 Kit for XT2 3/4 poles fixed 200 KY2611(2) 1/1 Kit for XT2 poles fixed + RC mod. 200 KY2601 1/1 Kit for XT2 3/4 poles plug-in 200 KY2621(2) 1/1 Kit for XT2 3/4 poles withdrawable 300 KY2631(2) 1/1 Kit for XT2 3/4 poles fixed (MRD) 200 KY2605 1/1 Kit for XT2 3/4 poles fixed (CM) 200 KY2607 1/1 Kit for XT3 3/4 poles fixed 200 KY3611(2) 1/1 Kit for XT3 poles fixed + RC mod. 300 KY3601 1/1 Kit for XT3 3/4 poles plug-in 300 KY3621(2) 1/1 Kit for XT3 3/4 poles fixed (MRD) 200 KY3605 1/1 Kit for T7 3/4 poles fixed Kit for T7M 3/4 poles fixed (CM) 600 Kit for XT3 3/4 poles fixed (CM) 200 KY3607 1/1 Kit for XT3 - XT1 3/4 poles fixed (I) 500 KY1131(2) 1/1 Kit for XT3 3/4 poles fixed (I) 500 KY3131(2) 1/1 Kit for XT4 3/4 poles fixed 200 KY4611(2) 1/1 Kit for XT4 poles fixed + RC mod. 200 KY4601 1/1 Kit for XT4 3/4 poles plug-in 200 KY4621(2) 1/1 Kit for XT4 3/4 poles withdrawable 300 KY4631(2) 1/1 Kit for XT4 3/4 poles fixed (MRD) 200 KY4607 1/1 Kit for XT4 3/4 poles fixed (CM) 200 KY4604 1/1 Kit for XT4 3/4 poles fixed (I) 500 KY4141(2) 1/1 5 * Only segregation Form 2 (1) If used with rotary handle, use the protruding door PV..63 and PV..83. (2) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for plate-mounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for plate-mounting, AD3308 XT4 3P Flange for plate-mounting. (DRH) = Direct rotary handle; (MO) = Motor operator; (I) = Interlocked; (IM) = Interlocked motor operated. > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/81 ArTu K Modular Structures Ordering codes GD.... KT.... KY.... SEGREGATED STRUCTURES- Kit for switchgear with segregated frame D≥500mm Kit for apparatus Kit for installation of Tmax circuit-breakers Vertical installation (rear terminals) Description 12 DIN mod. - W=390mm Kit DIN T1-T2-T3-XT1-XT3, 3/4 poles fixed+RC mod. Kit for T4 3/4 poles fixed 5 Dimensions (mm) H W Code Package/ No. of pieces 200 GD....(1) 1/1 400 KT4129 1/1 KT5137 1/1 1/1 Kit for T5 3/4 poles fixed 400 Kit for T5 (630A) 3/4 poles plug-in 400 KT5125 Kit for T5 (630A) 3/4 poles withdrawable 400 KT5126 1/1 Tmax XT4 3/4 poles fixed 300 KY4412(3) 1/1 24 DIN mod. - W=600mm Kit DIN T1-T2-T3-XT1-XT3, 3/4 poles fixed+RC mod. Kit for T4 3/4 poles fixed 200 GD....(1) 1/1 400 KT4121 1/1 Kit for T4 3/4 poles plug-in 400 KT4222 1/1 Kit for T4 3/4 poles withdrawable 400 KT4128 1/1 Kit for T5 3/4 poles fixed 400 KT5128 1/1 Kit for T5 (400A) 3/4 poles plug-in 400 KT5129 1/1 Kit for T5 (630A) 3/4 poles plug-in 400 KT5123 1/1 Kit for T5 (400A) 3/4 poles withdrawable 400 KT5223 1/1 Kit for T5 (630A) 3/4 poles withdrawable 400 KT5124 1/1 Kit for T6 3/4 poles fixed 500 KT6210 1/1 Kit for T6 3/4 poles withdrawable (MRD) 500 KT6230 1/1 Kit for T6 3/4 poles fixed (MRD) 500 KT6132 1/1 Kit for T6 3/4 poles fixed (CM) 500 KT6133 1/1 Kit for T6 3/4 poli estrabile (CM) 500 KT6141 1/1 Kit for T7 3/4 poles fixed 390 600 (2) 500 KT7215 1/1 500 KT7230 1/1 Kit for XT4 3/4 poles fixed 300 KY4612(3) 1/1 36 DIN mod. - W=800mm Kit DIN T1-T2-T3-XT1-XT3, 3/4 poles fixed+RC mod. Kit for T8 3/4 poles fixed 200 GD....(1) 1/1 KT8210 1/1 Kit for T7M 3/4 poles fixed (CM-I-IM) Kit for T7 3/4 poles withdrawable Kit for T7M 3/4 poles withdrawable (CM-I-IM) 900 800 (1) For the selection of kit for installation on DIN rail see page 5/79. (2) If used with rotary handle, use the protruding door PV..63 and PV..83. (3) For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for plate-mounting: AD3306 XT2 3P Flange for plate-mounting, AD3307 XT3 3P Flange for plate-mounting, AD3308 XT4 3P Flange for plate-mounting. (DRH) = Direct rotary handle; (MO) = Motor operator; (I) = Interlocked; (IM) = Interlocked motor operated. > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/82 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 SEGREGATED STRUCTURES- Kit for switchgear with segregated frame D≥500mm Kit for apparatus Kit for installation of Emax circuit-breakers X1, E1, E2, E3, E4, E6 Dimensions (mm) Description H W Code Package/ No. of pieces Vertical installation (rear terminals) 24 DIN mod. - W=600mm Kit for X1 3/4 poles fixed 500 KT7215 1/1 Kit for X1 3/4 poles withdrawable 500 KT7230 1/1 Kit for E1-E2 3/4 poles fixed 600 Kit for E1-E2 3/4 poles withdrawable 600 KE2215 1/1 KE2235 1/1 Kit for E3 3/4 poles fixed 600 KE3205 1/1 Kit for E3 3/4 poles withdrawable 600 KE3236 1/1 600 5 36 DIN mod. - W=800mm Kit for E3 3/4 poles fixed 600 KE4214 1/1 Kit for E3 3/4 poles withdrawable 600 KE4234 1/1 Kit for E4 3/4 poles fixed (I) 50% neutral 600 KE5214 1/1 Kit for E4 3/4 poles withdrawable (I) 50% neutral 600 KE5234 1/1 48 DIN mod. - W=1000mm Kit for E6 3/4 poles fixed 50% neutral 600 KE6340 1/1 Kit for E6 3/4 poles withdrawable 50% neutral 600 KE6343 1/1 Kit for E4 4 poles fixed 100% neutral 600 KE4100 1/1 Kit for E4 4 poles withdrawable 100% neutral 600 KE5236 1/1 Dimensions (mm) H W Code Package/ No. of pieces 500 500 600 600 600 KN1456(1) KN1856 KN2066 KN2666 1/1 1/1 1/1 1/1 600 600 800 KN4268(2) KN4868(2) 1/1 1/1 600 600 1000 KN6461(3) KN6061(3) 1/1 1/1 400 500 600 KN1246 KN1656 1/1 1/1 (I) = Interlocked. Kit for installation of Emax 2 circuit-breakers Description Vertical installation (rear terminals) 24 DIN mod. - W=600mm Kit for E1.2 3/4 poles fixed Kit for E1.2 3/4 poles withdrawable Kit for E2.2 3/4 poles fixed (I) Kit for E2.2 3/4 poles withdrawable (I) 36 DIN mod. - W=800mm Kit for E4.2 3/4 poles fixed (I) Kit for E4.2 3/4 poles withdrawable (I) 48 DIN mod. - W=1000mm Kit for E6.2 3/4 poles fixed 50% neutral Kit for E6.2 3/4 poles withdrawable 50% neutral Horizontal installation (rear terminals) 24 DIN mod. - W=600mm Kit for E1.2 3/4 poles fixed Kit for E1.2 3/4 poles withdrawable (1) (2) The E1.2 fixed with rear needs enclosures with D=500mm For E4.2 (Fix./Interlocked or Withdrawable/Interlocked), use D=700mm (or D=900mm with proper intermediate uprights SK1881/SK2081) for 3200A and D=900mm for 4000A. (3) E6.2 (Fix. or Withdrawable, not with interlock, “half sized” with N=50%) can be installed in only one enclosure with D=900mm, or in more structures coupled back to back (min. D=900). Only one E6.2 per column (D=900mm) can be installed, at a maximum height of H=1100mm; below this breaker it is not possible to install any other device. > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/83 ArTu K Modular Structures Ordering codes SEGREGATED STRUCTURES- Kit for switchgear with segregated frame D≥500mm Segregation 900 SK1881 SK2081 Intermediate upright for segregated structures D=900mm Dimensions (mm) Description H Code Package/ No. of pieces No.2 lateral intermediate uprights 1800 SK1881 1/2 No.2 lateral intermediate uprights 2000 SK2081 1/2 Horizontal circuit-breakers segregation Form 3 5 Dimensions (mm) H D Code Package/ No. of pieces Segregation kit Form 3 200 500/700 FH3224 1/1 Segregation kit Form 3 300 500/700 FH3434 1/1 Segregation kit Form 3 400 500/700 FH3544 1/1 Segregation kit Form 3 600 500/700 FH3764 1/1 Segregation kit Form 3 200 500/700 FH3220 1/1 Segregation kit Form 3 300 500/700 FH3430 1/1 Segregation kit Form 3 400 500/700 FH3540 1/1 Segregation kit Form 3 500 500/700 FH3650 1/1 Segregation kit Form 3 800 500/700 FH3680 1/1 Segregation kit Form 3 600 500/700 FH3760 1/1 Segregation kit Form 3 800 500/700 FH3780 1/1 Segregation kit Form 3 200 900 FH1020 1/1 Segregation kit Form 3 300 900 FH1030 1/1 Segregation kit Form 3 400 900 FH1040 1/1 Segregation kit Form 3 500 900 FH1050 1/1 Segregation kit Form 3 600 900 FH1060 1/1 500 700 FH7580 1/1 500 900 FH7510 1/1 Description Code Package/ No. of pieces Kit segregation form 4 to combine to FH3224 or FH3220 FH4220 1/1 Kit segregation form 4 to combine to FH3434 or FH3430 FH4430 1/1 Kit segregation form 4 to combine to FH3544 or FH3540 FH4540 1/1 Kit segregation form 4 to combine to FH3764 or FH3760 FH4650 1/1 Kit segregation form 4 to combine to FH3650 FH4220 (2) 1/1 Kit segregation form 4 to combine to FH3760 FH4760 1/1 Kit segregation form 4 to combine to FH3780 FH4220 Kit segregation form 4 to combine to FH1020 FH4220 1/1 Kit segregation form 4 to combine to FH1030 FH4430 1/1 Kit segregation form 4 to combine to FH1040 FH4540 1/1 Kit segregation form 4 to combine to FH1050 FH4650 1/1 Kit segregation form 4 to combine to FH1060 FH4760 1/1 Description 12 DIN mod. - W=390mm FV3... 24 DIN mod. - W=600mm FH.... Segregation kit T7-X1 withdrawable (1) Form 4 (to add to Form 3 kits) FH4... (1) Only Form 3. (2) Order 4 pieces To select the proper kit, please see page 5/36. > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/84 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 (2) 1/1 SEGREGATED STRUCTURES- Kit for switchgear with segregated frame D≥500mm Segregation FV4... Vertical circuit-breakers segregation Form 3 Dimensions (mm) Description H D Code Package/ No. of pieces Segregation kit Form 3 400 500 FV3456 1/1 Segregation kit Form 3 400 700 FV3458 1/1 Segregation kit Form 3 500 500 FV3556 1/1 Segregation kit Form 3 500 700 FV3558 1/1 Segregation kit Form 3 600 700 FV3668 1/1 Segregation kit Form 3 800 700 FV3788 1/1 Segregation kit Form 3 600 700 FV4557 1/1 Description Code Package/ No. of pieces Kit segregation form 4 to combine to FV3456 FV4456 1/1 Kit segregation form 4 to combine to FV3458 FV4458 1/1 Kit segregation form 4 to combine to FV3556 FV4556 1/1 Kit segregation form 4 to combine to FV3558 FV4558 1/1 Kit segregation form 4 to combine to FV3668 FV4668 1/1 Kit segregation form 4 to combine to FV3788 FV4788 1/1 5 Form 4 (to add to Form 3 kits) Form 3 only Dimensions (mm) W D Code Package/ No. of pieces Segregation kit Emax X1-Tmax T7 withdrawable 600 700 FH3960 1/1 Segregation kit Emax E1-E2-E3 fixed 600 700 FH3960 1/1 Segregation kit Emax E1-E2-E3 withdrawable 600 700 FH3961 1/1 Segregation kit Emax E4 fixed 800 900 FH3965 1/1 Segregation kit Emax E4 withdrawable 800 900 FH3966 1/1 Segregation kit E1-E2-E3 fixed - T7M-X1 600 withdrawable 900 FH3690 1/1 Segregation kit E1-E2-E3 withdrawable 600 900 FH3691 1/1 Segregation kit E4/E6 fixed 600 900 FH3190 1/1 Segregation kit E4/E6 withdrawable 600 900 FH3191 1/1 Description FH39.. FH36.. FH31.. 24 DIN mod. - W=600mm 48 DIN mod. - W=1000mm To select the proper kit, please see page 5/36. > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/85 ArTu K Modular Structures Ordering codes SH4000 SH6000 SH8000 SH1100 SEGREGATED STRUCTURES- Kit for switchgear with segregated frame D≥500mm Segregation Universal shelf Description Code Package/ No. of pieces SH4000 1/1 SH6000 1/1 SH8000 1/1 SH1100 1/1 Code Package/ No. of pieces 12 DIN mod. - W=390mm Universal busbar segregation shelf 24 DIN mod. - W=600mm Universal busbar segregation shelf 36 DIN mod. - W=800mm Universal busbar segregation shelf 5 48 DIN mod. - W=1000mm Universal busbar segregation shelf Busbar segregation Form 3 2xSH4030 2xSH2030 2xSH1030 2xSH8570 2xSH1090 Horizontal busbar segregation down Dimensions (mm) Description W D 390 500/700 SH4030 12 DIN mod. - W=390mm Horizontal busbar segregation (down) 1/1 24 DIN mod. - W=600mm Horizontal busbar segregation (down) 500/700 SH2030 1/1 900 SH1030 1/1 800 500/700 SH8570 1/1 1000 900 SH1090 1/1 H Code Package/ No. of pieces 200 SV4061 1/1 Horizontal busbar segregation (rear) 200 SV2061 1/1 Horizontal busbar segregation (rear) 300 SV3060 1/1 Horizontal busbar segregation (rear) 200 SV2081 1/1 Horizontal busbar segregation (rear) 300 SV3080 1/1 Horizontal busbar segregation (rear) 400 SV4081 1/1 Horizontal busbar segregation (rear) 200 SV2010 1/1 Horizontal busbar segregation (rear) 300 SV3010 1/1 Horizontal busbar segregation (rear) 400 SV4010 1/1 Horizontal busbar segregation (down) 600 36 DIN mod. - W=800mm Horizontal busbar segregation (down) 48 DIN mod. - W=1000mm Horizontal busbar segregation (down) Horizontal busbar segregation rear Dimensions (mm) SV.... Description 12 DIN mod. - W=390mm Horizontal busbar segregation (rear) 24 DIN mod. - W=600mm 36 DIN mod. - W=800mm 48 DIN mod. - W=1000mm > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/86 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 AD1042 SEGREGATED STRUCTURES- Kit for switchgear with segregated frame D≥500mm Segregation Busbar segregation Form 3 SV1860 SV1880 SV1815 SV2265 SV2285 SV2015 Vertical busbar segregation side Dimensions (mm) D Code Package/ No. of pieces 500 SV1860 1/1 700 SV1880 1/1 Vertical busbar segregation (side) 900 SV1815 1/1 Vertical busbar segregation (side) 500 SV2265 1/1 700 SV2285 1/1 900 SV2015 1/1 Description H Vertical busbar segregation (side) Vertical busbar segregation (side) Vertical busbar segregation (side) 1800 2000 Vertical busbar segregation (side) 5 Vertical segregation Emax (side) Dimensions (mm) Description H D Code Package/ No. of pieces SV2080 SV2011 Vertical segregation Emax (side) 200 700 SV2080 1/1 SV4080 SV2411 Vertical segregation Emax (side) 400 700 SV4080 1/1 Vertical segregation Emax (side) 200 900 SV2011 1/1 Vertical segregation Emax (side) 400 900 SV4011 1/1 SV2064 Vertical segregation Emax (rear) Dimensions (mm) Description H D Code Package/ No. of pieces Vertical segregation Emax (rear) 400 600 SV2064 1/1 Code Package/ No. of pieces Busbar segregation in the cable container SH4031 SH4033 SH4034 SH4035 Dimensions (mm) Description W D Horizontal busbar segregation in internal cable container 200 500/700 SH4031 1/1 Horizontal busbar segregation in additional cable container 300 500/700 SH4033 1/1 Horizontal busbar segregation in structure W=390 used as busbar container 400 500/700 SH4034 1/1 Horizontal busbar segregation in structure W=390 used as busbar container 600 500/700 SH4035 1/1 Internal cable container rear segregation Dimensions (mm) AD1024 AD1025 Description H Code Package/ No. of pieces Internal cable container rear segregation 1800 AD1024 1/1 Internal cable container rear segregation 2000 AD1025 1/1 Description Code Package/ No. of pieces No.4 spacers for lateral segregation AD1042 1/4 Accessories > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/87 ArTu K Modular Structures Ordering codes BA0400 BA0800 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Distribution system Distribution busbar with shaped section Dimensions (mm) BA1250 BA1600 BA2000 Description W Code Package/ No. of pieces Busbar In=400A 1730 BA0400 1/1 Busbar In=800A 1730 BA0800 1/1 Busbar In=1250A 1730 BA1250 1/1 Busbar In=1600A 1730 BA1600 1/1 Busbar In=2000A (1 busbar for phase) 1730 In = 3200A (2 busbars for phase) BA2000 1/1 5 Busbar holder for shaped section PB0802 Description Code Package/ No. of pieces Scaled PB1600 PB0803 PB1601 Scaled busbar holder In=800A - 35kA PB0802 1/1 Scaled busbar holder up to In=1600A - 75kA PB1600 1/1 Linear Linear busbar holder In=800A - 35kA PB0803 1/1 Linear busbar holder up to In=1600A - 75kA PB1601 1/1 Linear busbar holder up to In=1600A - 65kA PB1603 1/1 Linear busbar holder up to In=3200A - 100kA (1-2 busbars per phase) PB3201 1/1 PB1603 PB3201 20 AD1056 27 37 47 > Rapid selection table page 5/6 AD1064 AD1071 AD1072 Hammer seal screws for busbars with shaped section Description Code Package/ No. of pieces No.12 M8 hammer screws W=20mm for cable terminal AD1056 1/12 No.12 M8 screws-W=27mm for flat busbars up to 10mm, complete with screw-covering cap AD1064 1/12 No.12 M8 screws-W=37mm for flat busbars up to 30mm, complete with screw-covering cap AD1071 1/12 No.12 M8 screws-W=47mm for flat busbars up to 30mm, complete with screw-covering cap AD1072 1/12 > In-depth technical information page 6/1 5/88 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Distribution system Resting bases with shaped section AD1066 Description Code Package/ No. of pieces No.4 resting bases for 400/800A busbars AD1065 1/4 No.4 resting bases for 1250/1600A busbars AD1067 1/4 Adapters for busbars with shaped section AD1065 AD1067 Description Code Package/ No. of pieces No.4 adapters for In=400/800A busbars with busbar holder (PB1600-PB1601-PB1603) AD1066 1/4 Description Code Package/ No. of pieces No.4 joints for 800A busbars with shaped section (with 800/1250/1600A busbars) AD1068 1/4 No.4 joints for 1250/1600A busbars with shaped section (with 1250/1600/2000A AD1069 1/4 busbars) AD1063 1/4 No.4 joints for connecting busbars with shaped section (with rectangular pre-drilled AD1078 1/4 busbars pitch 25mm) AD1073 1/4 No.4 joints complete with screws for connecting busbars with shaped section up to AD1077 1/4 5 Joints for busbars with shaped section AD1069 AD1068 AD1063 3200A (with busbars with shaped section up to 1600A) No.4 joints complete with screws for connecting 3200A busbars with shaped section No.4 copper 400A branch joints Selection of the connection joint and busbar holder compatibility Horizontal busbars AD1078 BA2000 AD1073 BA2000 Bars with shaped section Vertical busbars Bars with shaped section Busbar holder PB3201 (3200A) PB3201 (3200A) 2xAD1069 (1) 1xAD1073 (2) PB1601 (1250/1600A) AD1078 PB1601 (1600/1250A) AD1069 PB1603 (1250/1600A) > Rapid selection table page 5/6 AD1063 AD1069 AD1078 AD1068 PB1603 (≤800A) AD1077 BP3200 (3200A) AD1069 PB1600 (1250/1600A) PB1601 (≤800A) Flat busbars PB1603 (1600/1250A) AD1068 Joints valid for “T” and “L” branches. (1) Only “L” branch (2) Only “T” branch > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/89 ArTu K Modular Structures Ordering codes STRUCTURES WITHOUT SEGREGATION/SEGREGATED Distribution system Pic. 1 Fixing crosspieces for busbars with shaped section Pic. 1 - Busbars vertically on back of structure Description Code Package/ No. of pieces 12 DIN mod. - W=390mm No.2 crosspieces structure for PB0803/PB0802 TV4001 1/2 No.2 crosspieces structure for PB1600/PB1601/PB1603 TV4000 1/2 24 DIN mod. - W=600mm Pic. 2 5 No.2 crosspieces structure for PB0803 TV6202 1/2 No.2 crosspieces structure for PB1601/PB1603 TV6201 1/2 No.2 crosspieces structure for PB0803 TV8202 1/2 No.2 crosspieces structure for PB1601/PB1603 TV8201 1/2 36 DIN mod. - W=800mm Pic. 2 - Busbars vertically on back of external/internal cable container Description Code Package/ No. of pieces TV3201 1/2 TV3000 1/2 Internal cable container - W=200mm No.2 crosspieces for PB0802/PB1600 External cable container - W=300mm No.2 crosspieces for PB0802 Pic. 3 Pic. 3 - Vertical busbars on side of the internal/external cable container Dimensions (mm) Description D Code Package/ No. of pieces No.2 crosspieces internal cable container PB0802 225 TV3101 1/2 300 TV5101 1/2 500 TV6101 (1) 1/2 TV8101 1/2 TV1101 1/2 P Code Package/ No. of pieces 500 TV6001 1/2 500 TV6005 1/2 700 TV8001 1/2 700 TV8005 1/2 900 TV1001 1/2 900 TV1005 1/2 No.2 Internal/external cable container crosspieces for PB1600/PB1601/PB1603 No.2 Internal/external cable 700 container crosspieces for PB1600/PB1601/PB1603/PB3201 900 (1) With PB1600 only in the additional cable container. Pic. 4 - Busbars vertically on side of structure Pic. 4 Structure without segregation TV6001-TV8001 TV1001 Dimensions (mm) Segregation structure TV6005-TV8005 TV1005 > Rapid selection table page 5/6 Description No.2 crosspieces for PB1603 open frame No.2 crosspieces for PB1603 - closed frame No.2 crosspieces for PB1600/ PB01601/PB1603/PB3201 open frame No.2 crosspieces for PB1600/ PB01601/PB1603/PB3201 closed frame No.2 crosspieces for PB1600/ PB01601/PB1603/PB3201 open frame No.2 crosspieces for PB1600/ PB01601/PB1603/PB3201 closed frame > In-depth technical information page 6/1 5/90 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Distribution system Fig. 5 Fixing crosspieces for busbars with shaped section Pic. 5 - Horizontal busbars at the top under the roof or down to the bottom Dimensions (mm) Fig. 6 Description D Code Package/ No. of pieces No.2 crosspieces for PB1603 500 TV1261 1/2 No.2 crosspieces for PB1601/ PB1603/PB3201 700 TV8211 1/2 900 TV1211 1/2 Code (A) Package/ No. of pieces TV4221(1) 1/2 TV6221(1) 1/2 TV8221(1) 1/2 Pic. 6 - Busbar horizontal at any height 5 Description 12 DIN mod. - W=390mm No.2 crosspieces for PB1601/PB1603 (A) 24 DIN mod. - W=600mm No.2 crosspieces for PB1601/PB1603/PB3201 36 DIN mod. - W=800mm No.2 crosspieces for PB1601/PB1603/PB3201 (B) Dimensions (mm) Description D Code (B) Package/ No. of pieces No.2 crosspieces for PB1603 500 TV6011 1/2 No.2 crosspieces for PB1601/ PB1603/PB3201 700 TV8011 1/2 900 TV1011 1/2 (1) With structures W=800mm with internal cable container, use a TV6221 crosspiece plus a TV8221 crosspiece as in Pic. 6a or two TV6221 crosspieces with the intermediate upright SK1880 or SK2080, as in Pic. 6b. Pic. 6.a Pic. 6.b SK 1880 SK 2080 Fig. 7 TV 8221 TV 6221 TV 6221 TV 6221 Pic. 7 - Connection to the Unifix H system Description Code Package/ No. of pieces TV6203 1/2 TV8203 1/2 12 DIN mod. - W=390mm No.2 crosspieces for PB1603 24 DIN mod. - W=600mm No.2 crosspieces for PB1603 > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/91 ArTu K Modular Structures Ordering codes BR0250 BR0400 BR0630 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Distribution system Flat busbars BR4005 BR6305 BR8005 BR1250 5 BR1600 BR2000 BR2500 BR2010 Dimensions (mm) Description L Code Package/ No. of pieces No.2 busbars In=250A, section 15x5mm 1750 BR0250 1/2 No.2 busbars In=400A, section 25x5mm 1750 BR0400 1/2 No.2 busbars In=630A, section 30x10mm 1750 BR0630 1/2 No.2 busbars In=400A, section 32x5mm 1750 BR4005 1/2 No.2 busbars In=630A, section 50x5mm 1750 BR6305 1/2 No.2 busbars In=800A, section 63x5mm 1750 BR8005 1/2 No.2 busbars In=1250A, section 100x5mm 1750 BR1250 1/2 No.2 busbars In=1600A, section 100x10mm 1750 BR1600 1/2 No.2 busbars In=2000A, section 120x10mm 1750 BR2000 1/2 No.2 busbars In=5000A section 160x10mm 1750 BR2500 1/2 No.2 busbars In=6300A section 200x10mm 1750 BR2010 1/2 Description Code Package/ No. of pieces No.2 linear busbar holders In=630A - 32kA BP0630 1/2 No.2 terminal covers for linear busbar holders BP0630 BP0632 1/2 No.2 scaled busbar holders In=630A - 23kA BP0634 1/2 No.2 busbar holders for busbars 5mm thick BP1250 1/2 No.2 busbar holders for busbars 10mm thick BP1600 1/2 No.2 busbar holders for 2 busbars per phase 10mm thick BP2500 1/2 No.2 busbar holders for 3 busbars per phase 10mm thick BP3200 1/2 No.2 busbar holders for 3 busbars per phase 16mm BP1621 1/2 No.2 busbar holders for 3 busbars per phase 20mm BP1622 1/2 BP0630 Busbar holders BP0632 BP0634 BP1250 BP1600 BP2500 BP3200 BP1621 BP1622 Busbar clamps Kit for tightening the flexible busbars onto the rigid busbars, without the need to drill the flexible busbars. > Rapid selection table page 5/6 Description Code Package/ No. of pieces 2 pairs of busbar tightening plates for busbars H=40mm BS3250 1/4 2 pairs of busbar tightening plates for busbars H=50mm BS5050 1/4 2 pairs of busbar tightening plates for busbars H=63mm BS6350 1/4 > In-depth technical information page 6/1 5/92 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Distribution system Pic. 1 Fixing crosspieces for flat busbars Pic. 1 - Busbars vertically on back of structure Description Code Package/ No. of pieces TR7005 1/2 TR8000 1/2 24 DIN mod. - W=600mm No.2 crosspieces for BP1250/BP1600/BP2500/ BP3200 36 DIN mod. - W=800mm No.2 crosspieces for BP1250/BP1600/BP2500/ BP3200 Pic. 2 5 Pic. 2 - Busbars vertically on side of internal/additional cable container Dimensions (mm) Code Package/ No. of pieces No.2 crosspieces on side of cable 500 container TR6101 1/2 No.2 crosspieces on side of cable 700 container TR8101 1/2 No.2 crosspieces on side of cable 900 container TV1101 1/2 No.2 crosspieces on side of cable 900 container 6300A TV2632 1/2 Description D Pic. 3 Pic. 3 - Busbar in horizontally on external cable container Dimensions (mm) Pic. 4 Structure without segregation TV6001-TV8001 TV1001 Description D Code Package/ No. of pieces No.2 Crosspieces for horizontal busbars in the cable container 500 TR6301 1/2 No.2 Crosspieces for horizontal busbars in the cable container 700 TR8301 1/2 D Code Package/ No. of pieces 500 TR6001 1/2 500 TR6005 1/2 700 TR8001 1/2 700 TR8005 1/2 900 TV1001 1/2 900 TV2630 1/2 900 TV1005 1/2 900 TV2631 1/2 Pic. 4 - Busbars vertically on side of structure Segregation structure TV6005-TV8005 TV1005 > Rapid selection table page 5/6 Dimensions (mm) Description No.2 crosspieces on side of structure-open frame No.2 crosspieces on side of structure-closed frame No.2 crosspieces on side of structure-open frame No.2 crosspieces on side of structure-closed frame No.2 crosspieces on side of structure-open frame No.2 crosspieces on side of structure-open frame 6300A No.2 crosspieces on side of structure-closed frame No.2 crosspieces on side of structure-closed frame 6300A > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/93 ArTu K Modular Structures Ordering codes Fig. 4 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Distribution system Fixing crosspieces for flat busbars Pic. 5 - Busbars horizontally at top of structure D Code Package/ No. of pieces 500 TV1261 1/2 700 TV8211 1/2 900 TV1311 1/2 900 TV2633 1/2 Dimensions (mm) Description No.2 horizontal crosspieces No.2 horizontal crosspieces 6300A 5 Fig. 6 Pic. 6 - Busbars horizontally at any height in the structure Dimensions (mm) Description No.2 crosspieces for BP1250/ BP1600 - open frame No.2 crosspieces for BP1250/ BP1600 - closed frame No.2 crosspieces for BP1250/ BP1600/BP2500/BP3200 open frame No.2 crosspieces for BP1250/ BP1600/BP2500/BP3200 closed frame No.2 crosspieces for BP1250/ BP1600/BP2500/BP3200 open frame No.2 crosspieces for BP1250/ BP1600/BP2500/BP3200 closed frame No.2 crosspieces for BP1622 open frame 6300A No.2 crosspieces for BP1622 closed frame 6300A D Code Package/ No. of pieces 500 TR6201 1/2 500 TR6205 1/2 700 TR8201 1/2 700 TR8205 1/2 900 TR1201 1/2 900 TR1205 1/2 900 TV2634 1/2 900 TV2635 1/2 Flexible busbars Flexible busbars insulated in self-extinguishing material. Dimensions (mm) Description W In (A) Code Package/ No. of pieces No.2 busbar section 20x3mm 2000 250 BF1602 1/2 No.2 busbar section 20x5mm 2000 400 BF2502 1/2 No.2 busbar section 24x6mm 2000 500 BF4002 1/2 No.2 busbar section 32x5mm 2000 630 BF4012(1) 1/2 No.2 busbar section 40x8mm 2000 1000 BF6302 1/2 No.2 busbar section 50x10mm 2000 1250 BF8002 1/2 (1) > Rapid selection table page 5/6 Only for circuit-breakers with front extended terminals or rear terminals. > In-depth technical information page 6/1 5/94 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Distribution system 600 800 Unifix H AD1061 ED2183 ED2191 Dimensions (mm) W Code Package/ No. of pieces Frame with 24 DIN module busbar 600 ED2183 1/1 Frame with 36 DIN module busbar 800 ED2191 1/1 AD1061 1/2 ED2209 1/1 Basic module for DIN L1-N top 16A ED2894 1/1 Basic module for DIN L1-L2 top 16A ED2902 1/1 Basic module for DIN L1-N bottom 16A ED2910 1/1 Basic module for DIN L1-L2 bottom 16A ED2928 1/1 Basic module L1/Neutral top 40A ED2654 1/1 Basic module L2/Neutral top 40A ED2662 1/1 Basic module L3/Neutral top 40A ED2670 1/1 Description Frames for Tmax No.2 fixing brackets onto structure for ED2183 o ED2091 Feeder modules ED2209 4P 400A feeder module (for ED2183-ED2191) Basic modules In 16A ED2894 ED2902 ED2910 ED2928 5 Basic modules In 40A ED2654 ED2662 ED2670 Basic modules In 63A Basic module L1 top 63A ED2531 1/1 ED0004 Basic module L2 top 63A ED2549 1/1 ED2531-ED2549 ED2564-ED2556 Basic module L3 top 63A ED2556 1/1 Basic module Neutral top 63A ED2564 1/1 Basic module L1 bottom 63A ED2572 1/1 Basic module L2 bottom 63A ED2590 1/1 Basic module L3 bottom 63A ED2598 1/1 Basic module Neutral bottom 63A ED2606 1/1 Basic module with cable L1 top 100A ED2720 1/1 Basic module with cable L2 top 100A ED2738 1/1 Basic module with cable L3 top 100A ED2746 1/1 Basic module with cable Neutral top 100A ED2753 1/1 Basic module L1 top ≤40A ED2557 1/1 Basic module L2 top ≤40A ED2558 1/1 Basic module L3 top ≤40A ED2559 1/1 Basic module Neutral top ≤40A ED2560 1/1 Basic module L1 top 125A ED2551 1/1 Basic module L2 top 125A ED2552 1/1 Basic module L3 top 125A ED2553 1/1 Basic module Neutral bottom 125A ED2554 1/1 Basic module false pole W=27mm ED2550 1/1 ED2720-ED2738 ED2746-ED2753 ED2551-ED2552 ED2553-ED2554 Basic modules In 100A Basic modules ≤ In 40A S800 ED2845 ED2550 Basic modules ≤ In 125A S800 ED2572-ED2590 ED2598-ED2506 > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/95 ArTu K Modular Structures Ordering codes STRUCTURES WITHOUT SEGREGATION/SEGREGATED Distribution system ED2217-ED2225 ED2233-ED2241 ED2258-ED2266 ED2274-ED2282 ED2332-ED2340 ED2357-ED2365 Unifix H Code Package/ No. of pieces Basic module L1 top L2 bottom ED2217 1/1 Basic module L2 top L1 bottom ED2225 1/1 Basic module L3 top N bottom ED2233 1/1 Basic module N top L3 bottom ED2241 1/1 Basic module false pole for residual current release RC221 ED2373 1/1 Basic module false pole for solenoid operator ED2381 1/1 Basic module L1 top L2 bottom ED2258 1/1 Basic module L2 top L1 bottom ED2266 1/1 Basic module L3 top N bottom ED2274 1/1 Basic module N top L3 bottom ED2282 1/1 Basic module false pole for residual current release RC221 ED2373 1/1 Basic module false pole for solenoid operator ED2399 1/1 Basic module L1 top ED2290 1/1 Basic module L2 top ED2308 1/1 Basic module L3 top ED2316 1/1 Basic module N top ED2324 1/1 Basic module L1 bottom ED2332 1/1 Basic module L2 bottom ED2340 1/1 Basic module L3 bottom ED2357 1/1 Basic module N bottom ED2365 1/1 Basic module false pole for residual current release RC221 ED2373 1/1 Basic module false pole for DDA ED2845 1/1 Basic module false pole for modular MDRC ED2852 1/1 No.2 IP20 covers (for ED2183-ED2191) W=173mm (10 DIN modules) ED2407 1/2 No.6 duct supports 40x60mm (only for modular apparatus) ED2936 1/6 ArTu M Kit for ED2183 and ED2191 PM3624 1/1 Modular front panel 300x600mm (HxW) PM3836 1/1 No.10 terminal covers T1 ED0001 1/10 No.10 terminal covers T2 ED0002 1/10 No.10 terminal covers T3 ED0003 1/10 No.10 terminal covers S200/F200 ED0004 1/10 Description Basic modules ≤ In 160A Tmax T1, Tmax XT1 ED0001 ED0002 ED0003 5 ED2290-ED2308 ED2316-ED2324 Basic modules ≤ In 160A Tmax T2 Basic modules ≤ In 250A Tmax T3, Tmax XT3 ED2373 ED2381 ED2399 ED2407 PM3624 PM3836 ED2936 Accessories Modular front panel 300x800mm (HxW) > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/96 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Distribution system 600 800 ED2961 ED2962 ED…. GD6002 GD8002 PM2624 PM2836 2 poli 4 poli N L1 N L1 L2 L3 ED3066 ED3033 ED3041 ED3058 ED3104 ED3101 ED3102 ED3103 400 350 600 1500 800 2500 1500 ED3090 ED3405 ED3413 ED3439 ED3132 ED0026 ED0025 > Rapid selection table page 5/6 Unifix L Description Dimensions W (mm) 2-poles busbars 100A 2P 8 module busbar 200 100A 2P 12 module busbar 400 100A 2P 18 module busbar 450 100A 2P 24 module busbar 600 100A 2P 36 module busbar 800 4-poles busbars 100A 4P 12 module busbar 400 100A 4P 18 module busbar 450 100A 4P 24 module busbar 600 100A 4P 36 module busbar 800 Connections for various apparatus Connection with 2 conductors L/N 16A Connection with 3 conductors L1/L2/L3 16A Connection with 4 conductors L1/L2/L3/N 16A single phase Connection with 2 conductors L1/N 40A Connection with 3 conductors L1/L2/L3 40A Connection with 4 conductors L1/L2/L3/N 40A Connections for apparatus No.10 connections L1-N 40 A No.10 connections L2-N 40 A No.10 connections L3-N 40 A No.10 connections L 1 100A No.10 connections L 2 100A No.10 connections L 3 100A No.10 connections N 100A Feeder with 4P 100A cable (W=350mm) Feeder with 4P 100A cable (W=1500mm) Feeder with 4P 100A cable (W=2500mm) Power supply modules with cable Parallel module 2P 100A with cable (W=600mm) Parallel module 4P 100A with cable (W=400mm) Parallel module 4P 100A with cable (W=600mm) Parallel module 4P 100A with cable (W=800mm) Parallel module 4P 100A with cable (W=1500mm) Power supply modules without cable In 100A No.10 single-pole power supply terminals L1 No.10 single-pole power supply terminals L2 No.10 single-pole power supply terminals L3 No.10 single-pole power supply terminals N Accessories No.10 busbar covers (W=600mm) No.2 busbar covers (W=800mm) DIN rail kit (W=400mm) DIN rail kit (W=600mm) DIN rail kit (W=800mm) Modular front panel 200x600mm (HxW) Modular front panel 200x800mm (HxW) Code Package/ No. of pieces ED2985 ED2993 ED3009 ED3017 ED3025 1/6 1/6 1/6 1/6 1/6 ED2944 ED2951 ED2969 ED2977 1/6 1/6 1/6 1/6 ED3108 ED3116 1/6 1/6 ED3124 1/6 ED3355 ED3363 ED3371 1/6 1/6 1/6 ED3272 ED3280 ED3298 ED3033 ED3041 ED3058 ED3066 ED3132 ED0026 ED0025 1/10 1/10 1/10 1/10 1/10 1/10 1/10 1/10 1/10 1/10 ED3082 ED3405 ED3090 ED3413 ED3439 1/6 1/6 1/6 1/6 1/6 ED3101 ED3102 ED3103 ED3104 1/10 1/10 1/10 1/10 ED2961 ED2962 GD4002 GD6002 GD8002 PM2624 PM2836 1/10 1/2 1/1 1/1 1/1 1/1 1/1 5 ED3124 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/97 ArTu K Modular Structures Ordering codes STRUCTURES WITHOUT SEGREGATION/SEGREGATED Accessories Structure side-by-side kit The ArTu K switchgear can be placed side by side both laterally and at the rear. The IP65 side-by-side kit consists of a set of supports and a gasket for keeping the degree of protection. In the IP31 version, in addition to the AD1014 kit, order the double finishing section (see page 5/59). 5 Description Code Package/ No. of pieces Kit for placing structures H=1600-1800-2000mm side by side laterally AD1014 1/1 Lifting eyebolts SA1350 AA9610 These allow cabled switchgear to be lifted. They are made of steel treated with white passivated galvanisation. Description Code Package/ No. of pieces No.4 steel M12 lifting eyebolts AA9610 1/4 Lifting reinforcements These allow handling of several ArTu K switchgear placed side by side. Description Code Package/ No. of pieces lifting reinforcements for side-by-side structures SA1350 1/2 Description Code Package/ No. of pieces No.2 brackets for fixing to the wall AD1808 1/2 Brackets for fixing to the wall Allow fixing of ArTu K switchgears to the wall. > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/98 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Accessories Additional base strip H=100mm Base strip for structure Dimensions (mm) D Code Package/ No. of pieces No.4 base strip + No.4 flanges 225 ZD2440 1/8 No.4 base strip + No.4 flanges 300 ZD2450 1/8 No.4 base strip + No.4 flanges 500 ZD2460 1/8 No.4 base strip + No.4 flanges 700 ZD2480 1/8 No.4 base strip + No.4 flanges 900 ZD4010 1/8 No.4 base strip + No.4 flanges 150 ZD2624 1/8 No.4 base strip + No.4 flanges 225 ZD2640 1/8 No.4 base strip + No.4 flanges 300 ZD2650 1/8 No.4 base strip + No.4 flanges 500 ZD2660 1/8 No.4 base strip + No.4 flanges 700 ZD2680 1/8 No.4 base strip + No.4 flanges 900 ZD6010 1/8 No.4 base strip + No.4 flanges 150 ZD2824 1/8 No.4 base strip + No.4 flanges 225 ZD2840 1/8 No.4 base strip + No.4 flanges 300 ZD2850 1/8 No.4 base strip + No.4 flanges 500 ZD2860 1/8 No.4 base strip + No.4 flanges 700 ZD2880 1/8 No.4 base strip + No.4 flanges 900 ZD8010 1/8 D Code Package/ No. of pieces No.4 base strip + No.4 flanges 150 ZD2324 1/8 No.4 base strip + No.4 flanges 225 ZD2340 1/8 No.4 base strip + No.4 flanges 300 ZD2350 1/8 No.4 base strip + No.4 flanges 500 ZD2361 1/8 No.4 base strip + No.4 flanges 700 ZD2381 1/8 Description 12 DIN mod. - W=390mm 5 24 DIN mod. - W=600mm 36 DIN mod. - W=800mm Base strip for cable container external Dimensions (mm) Description Vano cavi esterno W=300mm Base strip angle To make a 200mm high base strip, order a H=100mm kit, which includes four additional angle pieces and four additional flanges. Dimensions (mm) Description H Code Package/ No. of pieces 100 AZ4000 1/4 W=300mm No.4 base strip angle pieces > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/99 ArTu K Modular Structures Ordering codes STRUCTURES WITHOUT SEGREGATION/SEGREGATED Accessories Reinforced base strip H=100mm Description Code Package/ No. of pieces ZR4000 1/2 ZR6000 1/2 ZR8000 1/2 ZR3000 1/2 12 DIN mod. - W=390mm Front and rear profile 24 DIN mod. - W=600mm Front and rear profile 36 DIN mod. - W=800mm Front and rear profile Additional cable container - W=300mm 5 Front and rear profile One-piece quake-proof base compartment Base compartment in a single piece with reinforcing tubes installed at depth. Allows adjacent switchgear accessorized with particularly heavy components to be lifted. Height 100 mm, length up to 6 meters. RAL7012 grey colour with orange-peel finish. The number of reinforcing tubes depends on the length of the bank. Description Code Package/ No. of pieces One-piece base compartment H=100 mm for adjacent switchgear ZK1100 1/1 - Must be designed in a special dedicated way for each configuration. Always attach the drawing of the front view of the switchgear bank and specify the width, depth and switchgear sequence of each column. - Unit of measurement for ordering: METER. - Available in lengths of up to 6 m. > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/100 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Accessories AS0001 Kits for seismic hazard zones Anti-quake tests performed The tests provide a reference for comparison with dimensionally similar configurations and with regard to the load distributed within them. They concern 3 columns measuring 2 x 2231x910x636 mm (including base compartment) + 1 x2231x720x636 mm (including base compartment). Total length=2540 mm with busbar system and internal electrical components weighing about 1,500 kg (fig.1), and points for fixing to the floor with M12 bolts. The switchgear was tested in accordance with standard IEC 60068-2-57 “Environmental testing Part. 2: Test method. Vibration - Time history method” and standard IEE Std 693 “Recommended Practice for Seismic Design of Substation”. Similar fields of use* 5 Cabinet without specific accessories ZK1100 According to standards IEC 60068-2-57 - IEEE Std 693 According to Seismic Zone IEC 68-3-3 Magnitude according to Richter scale Intensity according to Mercalli scale Resistance capacity up to 0.5 g Zone 4 7 9 Cabinet with specific accessories AS0001 + reinforced base compartment According to standards IEC 60068-2-57 - IEEE Std 693 According to Seismic Zone IEC 68-3-3 Magnitude according to Richter scale Intensity according to Mercalli scale Resistance capacity up to 0.75 g Zone 4 7,5 10 * The references to the intensity scales are indicative. Product codes for creating structures for seismic hazard zones The product reaches 0.75 g resistance capacity with special base compartment ZK1100 and kit AS0001 comprising 12 reinforcing plates. Reinforced base compartment ZR… can be used as an alternative to the one-piece base compartment. Code Package/ No. of pieces No.12 (twelve) anti-quake reinforcing plates AS0001 1/12 Reinforced base compartment H=100 mm (see above) ZR.... 1/1 Description The segregation partitions replace the reinforcing kit. > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/101 ArTu K Modular Structures Ordering codes Pic. 1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Accessories Crosspieces for accessories Can be mounted on the structure to anchor cables or to mount accessories. The crosspieces for accessories can be mounted on the side, on the rear or in the cable container of the structure. STRUCTURES WITHOUT SEGREGATION Side crosspieces 5 Pic. 2 Dimensions (mm) Mounting position Description D Pic. Code Package/ No. of pieces No.2 side crosspieces 500 1 TR6001 1/2 No.2 side crosspieces 700 1 TR8001 1/2 SEGREGATED STRUCTURES Side crosspieces Dimensions (mm) Mounting position Description D Pic. Code Package/ No. of pieces No.2 side crosspieces 500 1 TR6005 1/2 No.2 side crosspieces 700 1 TR8005 1/2 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Side crosspieces Pic. 3 Dimensions (mm) Mounting position Description D Pic. Code No.2 side crosspieces 225 2 TR4101 1/2 No.2 side crosspieces 300 2 TV5101 1/2 No.2 side crosspieces 500 2 TR6101 1/2 No.2 side crosspieces 700 2 TR8101 1/2 Package/ No. of pieces STRUCTURES WITHOUT SEGREGATION/SEGREGATED Rear crosspieces Pic. 4 Dimensions (mm) Mounting position Description W Pic. Code Package/ No. of pieces No.2 rear crosspieces 600 3 TR7005 1/2 No.2 rear crosspieces 800 3 TR8000 1/2 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Reinforcement crosspieces Recommended for installation of fuse bases or transformers. Mounting position D Pic. Code Package/ No. of pieces No.2 reinforcement crosspieces 225 4 TR8400 1/2 No.2 reinforcement crosspieces 300 4 TR8500 1/2 No.2 reinforcement crosspieces 500 4 TR8600 1/2 No.2 reinforcement crosspieces 700 4 TR8800 1/2 No.2 reinforcement crosspieces 900 4 TR8900 1/2 Description > Rapid selection table page 5/6 Dimensions (mm) > In-depth technical information page 6/1 5/102 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Accessories Roof ventilation Allows the roof of the cabinet to be raised thereby increasing ventilation and therefore the power which can be dissipated. The degree of protection is IP20. The ventilation kit must not be mounted if the cabinet has to be lifted using the eyebolts. In this case, the kit must be mounted when installation has been completed. 15mm Description Code Package/ No. of pieces No.4 Roof ventilation kit AD1015 1/4 Diagram pocket holder The diagram pocket holder (made of RAL 2004 colour plastic, dim. HxL 237x265mm type A4) is applied to the inside of doors/blind panels of suitable size using the adhesive provided. Description Code Package/ No. of pieces Plastic diagram pocket holder AA5600 1/1 Code Package/ No. of pieces Supports for terminal boxes Description AD1041 Structure No. 2 supports for horizontal 45° angled terminal box AD1041 for ArTu K 1/2 No. 2 supports for horizontal terminal box for ArTu K AD1054 1/2 AD1055 1/4 Additional cable container No. 4 supports for vertical terminal box in internal/ additional ArTu K cable container AD1055 AD1054 Angled supports for terminal boxes and earthing busbars Description Code Package/ No. of pieces No.50 angled supports 1 row of terminals EV1110 1/50 EV1110 EV2110 No.10 angled supports 1 row of terminals EV2110 1/10 No.10 angled supports double row of terminals EV1111 1/10 EV1112 EV2113 EV1113 No.50 angled supports 1 row of terminals + earth EV1112 1/50 No.10 angled supports 1 row of terminals + earth EV2112 1/10 No.2 angled supports 1 row of terminals + earth EV1113 1/2 EV1119 EV1111 Insulators and copper busbars for neutral/earthing Description Code Package/ No. of pieces No.2 busbars 20x5 mm drilled and threaded M6* EV1119 1/50 No.2 busbars 25x5 mm drilled and threaded M6* EV1120 1/50 No.2 busbars 50x5 mm drilled and threaded M6* EV1121 1/25 No.50 hexagonal insulators 30x30mm M8 EV1122 1/50 No.50 hexagonal insulators 36x50mm M6 EV1123 1/50 No.50 hexagonal insulators 36x50mm M8 EV1124 1/25 No.25 hexagonal insulators 30x30mm M6 EV1125 1/25 * Length 2000mm > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/103 5 ArTu K Modular Structures Ordering codes TS4013 TS4011 TS4012 TS4000 TS4001 TS4002 TS4003 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Accessories Sections for accessories Description Dimensions (mm) W Code Package/ No. of pieces No.2 sections EN50024 C30 2000 TS4011 1/2 No.2 sections EN50035 G32 2000 TS4012 1/2 No.2 DIN sections EN50022 2000 TS4013 1/2 No.2 cable rails 600 TS4000 1/2 No.2 cable rails 800 TS4001 1/2 No.2 cable rails 1000 TS4002 1/2 No.2 cable rails 1200 TS4003 1/2 Code Package/ No. of pieces Modular 125A AD1076 (1) 1/1 Modular 125A AD1080 (2) 1/1 Modular 175A AD1007 (1) 1/1 Modular 175A AD1081 (2) Modular 250A AD1030 1/1 Modular 125A AD1031 1/1 Modular 125A AD1075 1/1 Modular 175A AD1006 1/1 Modular 125A AD1004 1/1 Modular 125A-medium-93x89x48 (HxLxP) AD1028 1/1 Modular 125A-large-96x126x48 (HxLxP) AD1029 1/1 Modular 160A AD1027 1/1 Horizontal 250A for structures W=600mm AD1034 1/1 Horizontal 250A for structures W=800mm AD1053 1/1 Description Code Package/ No. of pieces Supports for fixing to the structure for AD1034 and AD1053 AD1035 1/1 Connection accessory between two AD1080 AD1083 1/1 5 Dividers Description Single-pole AD1080 AD1075 AD1006 AD1081 AD1030 AD1031 AD1004 1/1 Three-pole Four-pole AD1028 AD1029 AD1027 AD1035 (1) 10 outputs - (2) 6 outputs AD1034 AD1053 Mounting accessories > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/104 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Accessories N Marking Code Package/ No. of pieces No.490 adhesive labels ø12mm symbol N EV1150 1/490 No.490 adhesive labels ø12mm symbol L1 EV1151 1/490 No.490 adhesive labels ø12mm symbol L2 EV1152 1/490 No.490 adhesive labels ø12mm symbol L3 EV1153 1/490 No.490 adhesive labels ø12mm symbol T EV1154 1/490 No.10 triangular adhesive labels 125mm with 400V lightning arrow symbol EV1155 1/10 No.300 triangular adhesive labels 20mm with lightning arrow symbol EV1156 1/300 Description 3 400 VOLT EV1090 EV1091 EV1092 EV1093 EV1050 EV1051 EV1056 EV1058 EV1050 > Rapid selection table page 5/6 5 Brackets for anchoring cables Adjustable cable blocking bracket can be mounted on sections with 10mm slot EV1050. Description Code Package/ No. of pieces No.10 cable blocking brackets min÷max ø 9÷16mm EV1090 1/10 No.10 cable blocking brackets min÷max ø 16÷30mm EV1091 1/10 No.5 cable blocking brackets min÷max ø 30÷48mm EV1092 1/5 No.5 cable blocking brackets min÷max ø 48÷72mm EV1093 1/5 Aluminium sliding guides for universal uses Description Code Package/ No. of pieces No.10 aluminium supporting sections 30x15 – W=2000mm EV1050 1/10 No.25 fixing brackets for EV1050 EV1051 1/25 No.100 aluminium M6 nuts for EV1050 EV1056 1/100 No.100 aluminium M8 nuts for EV1050 EV1058 1/100 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/105 ArTu K Modular Structures Ordering codes STRUCTURES WITHOUT SEGREGATION/SEGREGATED Accessories Inserts and keys AA1560 AA6120 AA6200 Code Package/ No. of pieces Box+ Yale insert (without tab) EV1008 1/1 Insert + Yale key for EV1008 EV1036 1/1 Ronis 455 insert + key for EV1008 EV1037 1/1 3mm double-tab insert + key for EV1008 EV1039 1/1 Double-tab insert AA6100 1/1 Double-tab Zn+Al+Mg alloy key AD1058 1/1 Yale insert + key AA6200 1/1 Male 6.4 triangular insert on ø 7.6 AA6120 1/1 Triangular key AA1560 1/1 Male 7square type insert; key not available AA6140 1/1 Hexagonal 8 type insert embedded; key not available AA6180 1/1 FIST type insert (FIAT) AA6160 1/1 Fiat key AA1570 1/1 Ronis E739 insert + key AA8004 1/1 Description Cable container EV1008 AA6140 Structures 5 AA1570 AA6160 AA1560 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/106 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED Accessories Spare parts > Rapid selection table page 5/6 Description Code Package/ No. of pieces No.10 hinges + screws for panels (spare part ACP468) AD1090 1/10 No.10 plug + door key kits (spare part APT002) AD1091 1/10 No.5 FP fixing accessories H=1800/2000mm (spare part A210) AD1092 1/5 Chimes for door H=1600mm (spare part) CA1600 1/1 Chimes for door H=1800mm (spare part) CA1800 1/1 Chimes for door H=2000mm (spare part) CA2000 1/1 No.2 DIN rail fixing brackets for open frame (switchgear AD1047 without segregation) 1/2 No.2 DIN rail fixing brackets for closed frame (segregated switchgear) AD1048 1/2 ArTu Survival Kit” - Accessories and small items for spare parts AD1057 1/1 No.10 ArTu handle covers AD1070 1/10 ArTu handle complete with lock and cover AD1022 1/1 No.4 base strip angle pieces H=100mm AZ4000 1/4 Internal finishing tape for IP31 Ral 7035 colour AD1001 1/1 No.20 cage nuts AD1036 1/20 No.50 three-lobed M6 spare screws AD1033 1/50 RAL 7035 colour spray paint for touching up (400 ml spray can) VB7035 1/1 Polished flange for XT1 3P mounted on DIN rail AD3301 1/1 Polished flange for XT1 4P mounted on DIN rail AD3302 1/1 Polished flange for XT3 3P mounted on DIN rail AD3303 1/1 Polished flange for XT3 4P mounted on DIN rail AD3304 1/1 > In-depth technical information page 6/1 5 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/107 ArTu K Modular Structures Examples of configurations ArTu T T T T T T T T T T T T T T T Terminal boxes ArTu K Series dim. 1600x500x150 (1831x748x287) mm (external hxwxd) IP65 with modular panels 5 Code Description Q.ty AD1808 No.2 wall fixing brackets, K 1 GD6002 DIN rail Kit without segreg.24 mod. w=600mm, K 6 LF1626 No.2 side panels 1600x250mm (hxd) K 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PM6672 Panel 72 mod. 600x600mm (hxw) M, K 2 PV1661 Glass door 1600x600mm (hxw) K 1 RF1660 Rear panel 1600x600mm (hxw) K 1 SK1600 No.4 ArTu K uprights h=1600mm 1 SK1604 No.2 reduced funct. frames h=1600mm K d=250mm 1 SK6025 ArTu K Base/Top/Base strip 600x250mm (wxd) 1 ArTu T T T T T T T T T T T T T T T Terminal boxes ArTu K Series dim. 1600x800x150 (1831x948x287) mm (external hxwxd) IP65 with modular panels Code Description Q.ty AD1808 No.2 wall fixing brackets, K 1 GD6002 DIN rail Kit without segreg.24 mod. w=600mm, K 6 LF1626 No.2 side panels 1600x250mm (hxd) K 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PM6672 Panel 72 mod. 600x600mm (hxw) M, K 2 PV1681 Glass door 1600x600mm (hxw) K 1 RF1680 Rear panel 1600x600mm (hxw) K 1 SK1600 No.4 ArTu K uprights h=1600mm 1 SK8025 ArTu K Base/Top/Base strip 800x250mm (wxd) 1 VC1624 Int. reduced cable cont.1600x250mm (hxd) K 1 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/108 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu ArTu ArTu SACE Additional panel Additional panel Additional panel Additional panel Additional panel Additional panel ArTu K Series dim. 1600x800x150 (1831x948x287) mm (external hxwxd) IP65 with plate for Tmax T5 and modular panels Code Description Q.ty AD1808 No.2 wall fixing brackets, K 1 GD8002 DIN rail Kit without segreg.24 mod. w=600mm, K 4 KL5114 Hor. fixed T5 Kit 300x800mm(hxw) M,K 1 LF1626 No.2 side panels 1600x250mm (hxd) K 1 PC2800 Blind panel 200x800mm (hxw) M, K 1 PC3800 Blind panel 300x800mm (hxw) M, K 1 PM2836 Panel 36 mod. 200x800mm (hxw) M, K 4 PV1682 Glass door 36 mod. 1600x800mm (hxw) K 1 RF1680 Rear panel 1600x800mm (hxw) K 1 SK1600 No.4 ArTu K uprights h=1600mm 1 SK1604 No.2 reduced funct. frames h=1600mm K d=250mm 1 SK8025 ArTu K Base/Top/Base strip 800x250mm (wxd) 1 > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/109 5 ArTu K Modular Structures Examples of configurations ArTu T T T T T T T T T T T T Terminal boxes 5 ArTu K Series dim. 1800x600x150 (2031x748x287) mm (external hxwxd) IP65 with plate for Tmax T5 and modular panels, complete with 400A busbars vertically on back of structure - Icw max 35kA Code Description Q.ty AD1808 No.2 wall fixing brackets, K 1 BA0400 Busbar In=400A 4 GD6002 DIN rail Kit without segreg. 24 mod. w=600mm, K 5 KT5112 Hor. fixed T5 Kit 300x600mm(hxw) M,K 1 LF1826 No.2 side panels 1800x250mm (hxd) K 1 PB0803 Linear busbar holder In=800A (35kA) 5 PC1600 Blind panel 100x600mm (hxw) M, K 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 2 PM6672 Panel 72 mod. 600x600mm (hxw) M, K 1 PV1861 Glass door 1800x600mm (hxw) K 1 RF1860 Rear panel 1800x600mm (hxw) K 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1804 No.2 reduced funct. frames h=1800mm K d=250mm 1 SK6025 ArTu K Base/Top/Base strip 600x250mm (wxd) 1 TV6202 No.2 rear of struct. crosspieces w=600xPB0803 3 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/110 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T Terminal boxes ArTu K Series dim. 1800x800x150 (2031x948x287) mm (external hxwxd) IP65 with plate for Tmax T3-XT3 and modular panels, complete with 800A busbars vertically on back of internal cable cont. - Icw max 35kA Code Description Q.ty Description Q.ty AD1808 Rear panel 1800x800mm (hxw) K 1 AD1808 Rear panel 1800x800mm (hxw) K 1 BA0800 Busbar In=800A GD6002 DIN rail Kit without segreg. 24 mod. w=600mm, K 4 BA0800 Busbar In=800A 4 5 GD6002 DIN rail Kit without segreg. 24 mod. w=600mm, K KT3112 5 T3 3/4P horiz. fixed without segreg. Kit M, K250 1 KX3612 XT3 3/4P horiz. fixed without segreg. Kit M, K250 1 LF1826 No.2 pann. later. 1800x150mm (hxp) K 1 LF1826 No.2 pann. later. 1800x150mm (hxp) K 1 PB0802 Scaled busbar holder In=800A (35 kA) 5 PB0802 Scaled busbar holder In=800A (35 kA) 5 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 2 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 2 PM6672 Panel 72 mod. 600x600mm (hxw) M, K 1 PM6672 Panel 72 mod. 600x600mm (hxw) M, K 1 PV1881 Glass door 1800x800mm (hxw) K 1 PV1881 Glass door 1800x800mm (hxw) K 1 RF1880 Rear panel 1800x800mm (hxw) K 1 RF1880 Rear panel 1800x800mm (hxw) K 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK8025 ArTu K Base/Top/Base strip 800x250mm (wxd) 1 SK8025 ArTu K Base/Top/Base strip 800x250mm (wxd) 1 TV3000 No.2 int. cable cont. cross. w=200mm x K d=250mm 3 TV3000 No.2 int. cable cont. cross. w=200mm x K d=250mm 3 VC1824 Int. reduced cable cont.1800x250mm (hxd) K 1 VC1824 Int. reduced cable cont.1800x250mm (hxd) K 1 Tmax T kit Code Tmax XT kit > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/111 5 ArTu K Modular Structures Examples of configurations ArTu T T T T T T T T T T T T T T T T T T T T Terminal boxes 5 ArTu K Series dim. 1800x800x150 (2031x948x287) mm (external hxwxd) IP65 with plate for Tmax T3-XT3 and modular panels, complete with 800A busbars vertically on back of internal cable cont. - Icw max 35kA Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit AD1808 Rear panel 1800x800mm (hxw) K 1 AD1808 Rear panel 1800x800mm (hxw) K 1 BA0800 Busbar In=800A 4 BA0800 Busbar In=800A 4 GD8002 DIN rail Kit without segreg.36 mod. w=800mm, K 5 GD8002 DIN rail Kit without segreg.36 mod. w=800mm, K 5 KL3113 T3 3/4P horiz. fixed without segreg. Kit w=800mm M, 1 KL3613 XT3 3/4P horiz. fixed without segreg. Kit w=800mm M, K250 1 LF1826 No.2 side panels 1800x250mm (hxd) K 1 LF1826 No.2 side panels 1800x250mm (hxd) K 1 PB0803 Linear busbar holder In=800A (35kA 5 PB0803 Linear busbar holder In=800A (35kA 5 PC2800 Blind panel 200x800mm (hxw) M, K 1 PC2800 Blind panel 200x800mm (hxw) M, K 1 PC4800 Blind panel 400x800mm (hxw) M, K 1 PC4800 Blind panel 400x800mm (hxw) M, K 1 PM2836 Panel 36 mod. 200x800mm (hxw) M, K 5 PM2836 Panel 36 mod. 200x800mm (hxw) M, K 5 PV1882 Glass door 36 mod. 1800x800mm (hxw) K 1 PV1882 Glass door 36 mod. 1800x800mm (hxw) K 1 RF1880 Rear panel 1800x800mm (hxw) K 1 RF1880 Rear panel 1800x800mm (hxw) K 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1804 No.2 reduced funct. frames h=1800mm K d=250mm 1 SK1804 No.2 reduced funct. frames h=1800mm K d=250mm 1 SK8025 ArTu K Base/Top/Base strip 800x250mm (wxd) 1 SK8025 ArTu K Base/Top/Base strip 800x250mm (wxd) 1 TV8202 No.2 rear of struct. crosspieces w=800xPB0803 3 TV8202 No.2 rear of struct. crosspieces w=800xPB0803 3 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/112 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T T T T T T T T T T T T T Terminal boxes ArTu K Series dim. 2000x600x150 (2131x748x287) mm (external hxwxd) IP65 with plate for Tmax T5-630A and modular panels, complete with 400A busbars vertically on back of structure - Icw max 35kA Code Description Q.ty AD1808 No.2 wall fixing brackets, K 1 BA0400 Busbar In=400A 4 GD6008 DIN rail Kit int. 150mm w=600mm M floor-mount. K 4 KT5112 Hor. fixed T5 Kit 300x600mm(hxw) M,K 1 LF2026 No.2 side panels 2000x250mm (hxd) K 1 PB0803 Linear busbar holder In=800A (35kA) 5 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC3600 Blind panel 300x600mm (hxw) M, K 1 PM3648 Panel 48 mod. 300x600mm (hxw) M, K 4 PV2061 Glass door 2000x600mm (hxw) K 1 RF2060 Rear panel 2000x600mm (hxw) K 1 SK2000 No.4 ArTu K uprights h=2000mm 1 SK2004 No.2 reduced funct. frames h=2000mm K d=250mm 1 SK6025 ArTu K Base/Top/Base strip 600x250mm (wxd) 1 TV6202 No.2 rear of struct. crosspieces w=600xPB0803 3 > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/113 5 ArTu K Modular Structures Examples of configurations ArTu T T T T T T T T T T T T T T T Terminal boxes 5 ArTu K Series dim. 1800x600x350 (2031x748x225) mm (external hxwxd) IP65 with plate for Isomax S5 and modular panels, complete with 800A busbars vertically on back of structure - Icw max 35kA Code Description Q.ty AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A 3 BA0800 Busbar In=800A 4 GD6002 DIN rail Kit without segreg.24 mod. w=600mm, K 6 KT5112 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 1 LF1840 No.2 side panels 1800x350mm (hxd) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 3 PC1600 Blind panel 100x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 3 PM6672 Panel 72 mod. 600x600mm (hxw) M, K 1 PV1861 Glass door 1800x600mm (hxw) K 1 RF1860 Rear panel 1800x600mm (hxw) K 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1804 No.2 funct. frames h=1800mm open K 1 SK6040 ArTu K Base/Top/Base strip 600x350mm (wxd) 1 TV6201 No.2 structure crosspieces w=600mm 2 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/114 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T Terminal boxes ArTu K Series dim. 1800x800x225 (2031x948x362) mm (external hxwxd) IP65 with plate for Tmax T5 and modular panels, complete with 800A busbars vertically on side of int. cable container - Icw max 35kA Code Description Q.ty BA0800 Busbar In=800A 4 GD6002 DIN rail Kit without segreg.24 mod. w=600mm, K 5 KT5102 Kit T5 3/4P vertic. fisso+mod diff. non segreg. K 500x600mm (hxl) 1 LF1840 No.2 side panels 1800x350mm (hxd) K 1 PB0802 Scaled busbar holder In=800A (35 kA) 5 PC1600 Blind panel 100x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 2 PM6672 Panel 72 mod. 600x600mm (hxw) M, K 1 PV1881 Glass door 1800x800mm (hxw) K 1 RF1880 Rear panel 1800x800mm (hxw) K 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK8040 ArTu K Base/Top/Base strip 800x350mm (wxd) 1 TV3101 No.2 int./ext. cable cont. crosspieces d=350mm 3 VC1824 Int. reduced cable cont.1800x200mm (hxw) K 1 > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/115 5 ArTu K Modular Structures Examples of configurations ArTu T T T T T T T T T T T T T T T T T T T T Terminal boxes 5 ArTu K Series dim. 1800x800x225 (2031x948x362)mm (external hxwxd) IP65 with plate for Tmax T5 and modular panels Code Description Q.ty GD8002 DIN rail kit not segregated 36 mod. w=800mm, K 4 KL5102 Kit for T5 3/4 poles fixed + RC mod. not segregated K 500x600mm (hxw) 1 LF1840 No.2 side panels 1800x350mm (hxd) K 1 PC1800 Blind panel 100x800mm (hxw) M, K 1 PC2800 Blind Panels 200x800mm (hxw) M, K 1 PM2836 36 mod. panels 200x800mm (hxwl) M, K 4 PS4968 Panels for 4 instruments 96x96 200x800mm (hwl)M, K 1 PV1882 Glass door 36 mod. 1800x800mm (hxw) K 1 RF1880 Rear panel 1800x800mm (hxw) K 1 SK1800 No.4 uprights ArTu K h=1800mm 1 SK1804 No.2 functional frames h=1800mm aperto K 1 SK8040 Base/Top/Base strip ArTu K 800x350mm (wxd) 1 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/116 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T Terminal boxes ArTu K Series dim. 2000x600x300 (2231x748x437)mm (external hxwxd) IP65 with plate for Tmax T5, T2-XT2 and modular panels Code Description Q.ty Description Q.ty GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 5 KT2117 Kit for T5 3/4 poles fixed + RC mod. not segregated K 500x600mm (hxw) 1 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 5 KX2613 Kit for T5 3/4 poles fixed + RC mod. not segregated K 500x600mm (hxw) 1 KT5102 Kit for T2 3/4 p. horiz. fixed 200x600mm (hxlw) 1 KT5102 Kit for XT2 3/4 p. horiz. fixed 200x600mm (hxlw) 1 LF2050 PC3600 No.2 side panels 200x300mm (hxd) K 1 LF2050 No.2 side panels 200x300mm (hxd) K 1 Blind panel 200x600mm (hxw) M, K 1 PC3600 Blind panel 200x600mm (hxw) M, K 1 PM2624 24 mod. Panel 200x600mm (hxw) M, K 2 PM2624 24 mod. Panel 200x600mm (hxw) M, K 2 PM6672 72 mod. Panel 600x600mm (hxw) M, K 1 PM6672 72 mod. Panel 600x600mm (hxw) M, K 1 PV2061 Glass door 2000x600mm (hxw) K 1 PV2061 Glass door 2000x600mm (hxw) K 1 RF2060 Rear panel. 2000x600mm (hxw) K 1 RF2060 Rear panel. 2000x600mm (hxw) K 1 SK2000 No.4 uprights ArTu K h=2000mm 1 SK2000 No.4 uprights ArTu K h=2000mm 1 SK2004 No.2 functional frames h=2000mm open K 1 SK2004 No.2 functional frames h=2000mm open K 1 SK6050 Base/Top/Base strip ArTu K 600x300mm (wxd) 1 SK6050 Base/Top/Base strip ArTu K 600x300mm (wxd) 1 Tmax T kit Code Tmax XT kit > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/117 5 ArTu K Modular Structures Examples of configurations ArTu T T T T T T T T T T ArTu K Series dim. 2000x390x225 (2231x538x362) mm (external hxwxd) IP65 with plate for Tmax T5, T2-XT2 and modular panels, complete with 800A busbars vertically on back of structure - Icw max 35kA 5 Code Description Q.ty Description Q.ty AD1066 No.4 busbar adapters In=800A with bus. hold. up to 1600A 4 BA0800 Busbar In=800A 4 AD1066 No.4 busbar adapters In=800A with bus. hold. up to 1600A 4 BA0800 Busbar In=800A GD4002 DIN rail Kit without segreg.12 mod. w=400mm, K 4 5 GD4002 DIN rail Kit without segreg.12 mod. w=400mm, K KT2411 5 T2 3/4P horiz. fixed without segreg. Kit, K 1 KX2411 XT2 3/4P horiz. fixed without segreg. Kit, K 1 KT5412 T5 vert. fixed Kit 400x400mm (hxw) 1 KT5412 T5 vert. fixed Kit 400x400mm (hxw) 1 LF2040 No.2 side panels 2000x350mm (hxd) K 1 LF2040 No.2 side panels 2000x350mm (hxd) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 4 PB1601 Linear busbar holder In=1600A (75 kA) 4 PC2400 Blind panel 200x400mm (hxw) K 2 PC2400 Blind panel 200x400mm (hxw) K 2 PM2424 Panel 12 mod. 200x400mm (hxw) K 5 PM2424 Panel 12 mod. 200x400mm (hxw) K 5 PV2041 Glass door 2000x400mm (hxw) K 1 PV2041 Glass door 2000x400mm (hxw) K 1 RF2040 Rear panel 2000x400mm (hxw) K 1 RF2040 Rear panel 2000x400mm (hxw) K 1 SK2000 No.4 ArTu K uprights h=2000mm 1 SK2000 No.4 ArTu K uprights h=2000mm 1 SK2003 No.2 funct. frames h=2000mm open K 1 SK2003 No.2 funct. frames h=2000mm open K 1 SK4040 ArTu K Base/Top/Base strip 400x350mm (wxd) 1 SK4040 ArTu K Base/Top/Base strip 400x350mm (wxd) 1 TV4000 No.2 rear crosspieces w=400mm, K 2 TV4000 No.2 rear crosspieces w=400mm, K 2 Tmax T kit Code Tmax XT kit > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/118 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu T T T T T T T T T T T T Terminal boxes ArTu K Series dim. 2000x800x300 (2231x948x437)mm (external hxwxd) IP65 with plate for Tmax T5, T2-XT2 and modular panels, complete with 400A busbars vertically on back of structure - Icw max 35kA Code Description Q.ty Code Description Q.ty AD1066 No.4 busbar adapters 400/800A 5 AD1066 BA0400 Busbar In=400A No.4 busbar adapters 400/800A 5 4 BA0400 Busbar In=400A GD6002 4 DIN rail kit not segregated 24 mod. w=600mm, K 5 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 5 KT2117 Kit for T2 3/4 p. horiz. fixed 200x600mm (hxlw) 1 KX2619 Kit for XT2 3/4 p. horiz. fixed 200x600mm (hxlw) 1 KT5102 Kit for T5 3/4 poles fixed + RC mod. not segregated K 500x600mm (hxw) 1 KT5102 Kit for T5 3/4 poles fixed + RC mod. not segregated K 500x600mm (hxw) 1 LF2050 No.2 side panels 2000x300mm (hxd) K 1 LF2050 No.2 side panels 2000x300mm (hxd) K 1 PB1603 Linear busbar holder In=1600A (65 kA) 5 PB1603 Linear busbar holder In=1600A (65 kA) 5 PC1600 Blind panel 100x600mm (hxw) M, K 1 PC1600 Blind panel 100x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PM2624 24 mod. Panel 200x600mm (hxw) M, K 2 PM2624 24 mod. Panel 200x600mm (hxw) M, K 2 PM6672 72 mod. Panel 600x600mm (hxw) M, K 1 PM6672 72 mod. Panel 600x600mm (hxw) M, K 1 PV2081 Glass door 2000x800mm (hxw) K 1 PV2081 Glass door 2000x800mm (hxw) K 1 RF2080 Rear panel 2000x800mm (hxw) K 1 RF2080 Rear panel 2000x800mm (hxw) K 1 SK2000 No.4 uprights ArTu K h=2000mm 1 SK2000 No.4 uprights ArTu K h=2000mm 1 SK8050 Base/Top/Base strip ArTu K 800x300mm (wxd) 1 SK8050 Base/Top/Base strip ArTu K 800x300mm (wxd) 1 TV5101 No.2 int./ext. cable container crosspieces d=300mm 3 TV5101 No.2 int./ext. cable container crosspieces d=300mm 3 VC2024 Internal reduced cable container 2000x200mm (hxw) K 1 VC2024 Internal reduced cable container 2000x200mm (hxw) K 1 Tmax T kit Tmax XT kit > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/119 5 ArTu K Modular Structures Examples of configurations ArTu ArTu K Series dim. 1800x600x500 (2031x748x637) mm (external hxwxd) IP41 with plate for Isomax S7, Tmax T5, T2-XT2 and modular panels, complete with 1250A busbars vertically on back of structure - Icw max 50kA 5 Code Description Q.ty Code AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A 1 AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A 1 BA0800 Busbar In=800A 1 BA0800 Busbar In=800A 1 Tmax T kit Description Q.ty Tmax XT kit BA1250 Busbar In=1250A 3 BA1250 Busbar In=1250A 3 KT2111 S7 vert. fixed without segreg. Kit, K 1 KX2611 Kit XT2 vert. fixed without segreg. Kit, K 1 KT5111 T2 3/4P horiz. fixed without segreg. Kit, K 2 KT5111 T2 3/4P horiz. fixed without segreg. Kit, K 2 KT7231 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 1 KT7231 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 1 LA1860 No.2 ventilated side panels 1800x600mm (hxw) K 1 LA1860 No.2 ventilated side panels 1800x600mm (hxw) K 1 PB1603 Linear busbar holder In=1600A (65kA) 4 PB1603 Linear busbar holder In=1600A (65kA) 4 PC3600 Blind panel 100x600mm (hxw) M, K 1 PC3600 Blind panel 100x600mm (hxw) M, K 1 PS4960 4-instrument panel 96x96 200x600mm (hxw) M, K 1 PS4960 4-instrument panel 96x96 200x600mm (hxw) M, K 1 PV1861 Glass door 1800x600mm (hxw) K 1 PV1861 Glass door 1800x600mm (hxw) K 1 RF1860 Rear panel 1800x600mm (hxw) K 1 RF1860 Rear panel 1800x600mm (hxw) K 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1803 No.2 funct. frames h=1800mm open K 1 SK1803 No.2 funct. frames h=1800mm open K 1 SK6060 ArTu K Base/Top/Base strip 600x600mm (wxd) 1 SK6060 ArTu K Base/Top/Base strip 600x600mm (wxd) 1 TV6001 No.2 axto frame struct. crosspieces d=600mm 2 TV6001 No.2 axto frame struct. crosspieces d=600mm 2 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/120 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu ArTu K Series dim. 1800x390x500 (2031x538x637) mm (external hxwxd) IP41 with plate for Tmax T5, T3, T2, XT3, XT2 and modular panels, complete with 1250A busbars vertically on side of structure - Icw max 50kA 5 Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit AD1066 No.4 busbar adapters In=800A with bus. hold. up to 1600A 1 AD1066 No.4 busbar adapters In=800A with bus. hold. up to 1600A 1 BA0800 Busbar In=800A 1 BA0800 Busbar In=800A 1 BA1250 Busbar In=1250A 3 BA1250 Busbar In=1250A 3 KT2411 T2 3/4P horiz. fixed without segreg. Kit, K 3 KX2411 kit XT2 3/4P horiz. fixed without segreg. Kit, K 3 KT3419 T3 3/4P horiz. fixed without segreg. Kit, K 1 KX3419 Kit XT3 3/4P horiz. fixed without segreg. Kit, K 1 KT5411 T5 horiz. fixed Kit 300x400mm (hxw) K 2 KT5411 T5 horiz. fixed Kit 300x400mm (hxw) K 2 LA1860 No.2 ventilated side panels 1800x600mm (hxw) K 1 LA1860 No.2 ventilated side panels 1800x600mm (hxw) K 1 PB1603 Linear busbar holder In=1600A (65kA) 4 PB1603 Linear busbar holder In=1600A (65kA) 4 PC2400 Blind panel 200x400mm (hxw) K 2 PC2400 Blind panel 200x400mm (hxw) K 2 PV1841 Glass door 1800x400mm (hxw) K 1 PV1841 Glass door 1800x400mm (hxw) K 1 RF1840 Rear panel 1800x400mm (hxw) K 1 RF1840 Rear panel 1800x400mm (hxw) K 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1803 No.2 funct. frames h=1800mm open K 1 SK1803 No.2 funct. frames h=1800mm open K 1 SK4060 ArTu K Base/Top/Base strip 400x600mm (wxd) 1 SK4060 ArTu K Base/Top/Base strip 400x600mm (wxd) 1 TV6001 No.2 axto frame struct. crosspieces d=600mm 2 TV6001 No.2 axto frame struct. crosspieces d=600mm 2 > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/121 ArTu K Modular Structures Examples of configurations ArTu ArTu K Series dim. 1800x800x500 (2031x948x637) mm (external hxwxd) IP41 with plate Tmax T7, T5, T2, XT2 and modular panels, complete with 1250A busbars vertically on side of internal cable riser - Icw max 35kA 5 Code Description Q.ty Description Q.ty AD1066 No.4 busbar adapters In=800A with bus. hold. up to 1600A 1 BA0800 Busbar In=800A 1 AD1066 No.4 busbar adapters In=800A with bus. hold. up to 1600A 1 BA0800 Busbar In=800A BA1250 Busbar In=1250A 1 3 BA1250 Busbar In=1250A KT2111 3 T2 3/4P horiz. fixed without segreg. Kit, K 1 KX2611 XT2 3/4P horiz. fixed without segreg. Kit, K 1 KT5111 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 2 KT5111 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 2 KT7231 S7 vert. fixed without segreg. Kit, K 1 KT7231 S7 vert. fixed without segreg. Kit, K 1 LA1860 No.2 ventilated side panels 1800x600mm (hxw) K 1 LA1860 No.2 ventilated side panels 1800x600mm (hxw) K 1 PB1603 Linear busbar holder In=1600A (65kA) 3 PB1603 Linear busbar holder In=1600A (65kA) 3 PC2600 Blind panel 100x600mm (hxw) M, K 2 PC2600 Blind panel 100x600mm (hxw) M, K 2 PV1881 Blind panel 200x600mm (hxw) M, K 1 PV1881 Blind panel 200x600mm (hxw) M, K 1 RF1880 Glass door 1800x800mm (hxw) K 1 RF1880 Glass door 1800x800mm (hxw) K 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK8060 ArTu K Base/Top/Base strip 800x600mm (wxd) 1 SK8060 ArTu K Base/Top/Base strip 800x600mm (wxd) 1 TV6101 No.2 int./ext. cable cont. crosspieces d=600mm 2 TV6101 No.2 int./ext. cable cont. crosspieces d=600mm 2 VC1823 Internal cable cont.1800x200mm (hxw) K 1 VC1823 Internal cable cont.1800x200mm (hxw) K 1 Tmax T kit Code Tmax XT kit > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/122 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu ArTu K Series dim. 2000x800x500 (2231x948x637)mm (external hxwxd) P41 with kit for Tmax T6, T5, T3, XT3 complete with 1600A busbars vertically on side on side of internal cable riser - Icw max 65kA Code Description Q.ty Description Q.ty BA1250 Busbar In=1250A 1 BA1600 Busbar In=1600A 3 BA1250 Busbar In=1250A 1 BA1600 Busbar In=1600A KT3119 Kit for T3 3/4P horizontal fixed not segregated K 3 3 KX3611 Kit for XT3 3/4P horizontal fixed not segregated K KT5111 3 Kit for T5 horizontal fixed +accessories 300x600mm (hxw) K 2 KT5111 Kit for T5 horizontal fixed +accessories 300x600mm (hxw) K 2 KT6211 Kit for T6 vertical fixed without segregation K 1 KT6211 Kit for T6 vertical fixed without segregation K 1 LA2060 No.2 ventilated side panels 2000x600mm (hxw) K 1 LA2060 No.2 ventilated side panels 2000x600mm (hxw) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 7 PB1601 Linear busbar holder In=1600A (75 kA) 7 PC3600 Blind panel 300x600mm (hxw) M, K 1 PC3600 Blind panel 300x600mm (hxw) M, K 1 PV2081 Glass door 2000x800mm (hxw) K 1 PV2081 Glass door 2000x800mm (hxw) K 1 RF2080 Rear panel 2000x800mm (hxw) K 1 RF2080 Rear panel 2000x800mm (hxw) K 1 SK2000 No.4 uprights ArTu K h=2000mm 1 SK2000 No.4 uprights ArTu K h=2000mm 1 SK8060 Base/Top/Base strip ArTu K 800x600mm (wxd) 1 SK8060 Base/Top/Base strip ArTu K 800x600mm (wxd) 1 TV6101 No.2 int./ext. cable container crosspieces d=600mm 4 TV6101 No.2 int./ext. cable container crosspieces d=600mm 4 VC2023 Internal cable container. 2000x200mm (hxw) K 1 VC2023 Internal cable container. 2000x200mm (hxw) K 1 Tmax T kit Code Tmax XT kit > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/123 5 ArTu K Modular Structures Examples of configurations ArTu Additional panel Additional panel Additional panel ArTu K Series dim. 2000x800x500 (2231x948x637)mm (external hxwxd) IP65 with kit for Tmax T6, T3, T2, XT3, XT2 complete with 1600A busbars vertically on side on side of internal cable riser - Icw max 65kA 5 Code Description Q.ty Description Q.ty BA1250 Busbar In=1250A 1 BA1600 Busbar In=1600A 3 BA1250 Busbar In=1250A 1 BA1600 Busbar In=1600A KT2111 Kit forT2 3/4P horiz. fixed not segregated K 3 2 KX2611 Kit for XT2 3/4P horiz. fixed not segregated K KT3119 2 Kit for T3 3/4P horiz. fixed not segregated K 2 KX3611 Kit for XT3 3/4P horiz. fixed not segregated K 2 KT6211 Kit for T6 vert. fixed not segregated K 1 KT6211 Kit for T6 vert. fixed not segregated K 1 LA2060 No.2 ventilated side panels 2000x600mm (hxw) K 1 LA2060 No.2 ventilated side panels 2000x600mm (hxw) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 7 PB1601 Linear busbar holder In=1600A (75 kA) 7 PC1600 Blind panel 100x600mm (hxw) M, K 1 PC1600 Blind panel 100x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 3 PC2600 Blind panel 200x600mm (hxw) M, K 3 PV2081 Glass door 2000x800mm (hxw) K 1 PV2081 Glass door 2000x800mm (hxw) K 1 RF2080 Rear panel 2000x800mm (hxw) K 1 RF2080 Rear panel 2000x800mm (hxw) K 1 SK2000 No.4 uprights ArTu K h=2000mm 1 SK2000 No.4 uprights ArTu K h=2000mm 1 SK8060 Base/Top/Base strip ArTu K 800x600mm (wxd) 1 SK8060 Base/Top/Base strip ArTu K 800x600mm (wxd) 1 TV6101 No.2 int./ext. cable container crosspieces d=600mm 4 TV6101 No.2 int./ext. cable container crosspieces d=600mm 4 VC2023 Internal cable container 2000x200mm (hxw) K 1 VC2023 Internal cable container 2000x200mm (hxw) K 1 Tmax T kit Code Tmax XT kit > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/124 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu Terminal boxes Terminal boxes ArTu K Series Form 3/4 segregation dim.1800x600x700 (2031x748x837) mm (external hxwxd) IP31 with plate for Tmax T5, T3, T2, XT3, XT2 complete with 1600A busbars vertically on side of structure - Icw max 50kA Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit BA1250 Busbar In=1250A 1 BA1250 Busbar In=1250A 1 BA1600 Busbar In=1600A 3 BA1600 Busbar In=1600A 3 IP3060 No.2 hor. finishing sections w=600mm K 1 IP3060 No.2 hor. finishing sections w=600mm K 1 IP3180 No.2 vert. finishing sections IP31 h=1800mm K 1 IP3180 No.2 vert. finishing sections IP31 h=1800mm K 1 KT2110 T2 3/4P hor. fixed segreg. Kit, K 2 KY2611 XT2 3/4P hor. fixed segreg. Kit, K 2 KT3110 T3 3/4P hor. fixed segreg. Kit, K 1 KY3611 XT3 3/4P hor. fixed segreg. Kit, K 1 KT5136 T5 segr. hor. fixed Kit 300x600mm(hxw)K 1 KT5136 T5 segr. hor. fixed Kit 300x600mm(hxw)K 1 LA1880 No.2 ventilated side panels 1800x800mm (hxw) K 1 LA1880 No.2 ventilated side panels 1800x800mm (hxw) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 5 PB1601 Linear busbar holder In=1600A (75 kA) 5 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PC4600 Blind panel 400x600mm (hxw) M, K 1 PF2005 Plain plate 200x600mm (hxw) segreg. K 2 PF2005 Plain plate 200x600mm (hxw) segreg. K 2 PF4005 Plain plate 400x600mm (hxw) segreg. K 1 PF4005 Plain plate 400x600mm (hxw) segreg. K 1 PS4960 4-instrument panel 96x96 200x600mm (hxw)M, K 1 PS4960 4-instrument panel 96x96 200x600mm (hxw)M, K 1 RF1860 Rear panel 1800x600mm (hxw) K 1 RF1860 Rear panel 1800x600mm (hxw) K 1 SH2030 Busbar hor. segregation w=600mm, K, PC 1 SH2030 Busbar hor. segregation w=600mm, K, PC 1 SH6000 Busbar hor. shelf w=600mm, K 2 SH6000 Busbar hor. shelf w=600mm, K 2 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1800 No.4 ArTu K uprights h=1800mm 1 SK1802 No.2 funct. frames h=1800mm closed K 1 SK1802 No.2 funct. frames h=1800mm closed K 1 SK6080 ArTu K Base/Top/Base strip 600x700mm (wxd) 1 SK6080 ArTu K Base/Top/Base strip 600x700mm (wxd) 1 SV2061 Busbar vert. segregation 200x600mm (hxw) K 1 SV2061 Busbar vert. segregation 200x600mm (hxw) K 1 TV8005 No.2 funct. frame struct. crosspieces d=800mm 3 TV8005 No.2 funct. frame struct. crosspieces d=800mm 3 Segregation Form 3 Segregation Form 3 FH3540 F3 horiz. segreg. Kit 400x600mm (hxw) K 1 FH3540 F3 horiz. segreg. Kit 400x600mm (hxw) K 1 FH3430 F3 horiz. segreg. Kit 200x600mm (hxw) K 3 FH3430 F3 horiz. segreg. Kit 200x600mm (hxw) K 3 FH3220 F3 horiz. segreg. Kit 300x600mm (hxw) K 4 FH3220 F3 horiz. segreg. Kit 300x600mm (hxw) K 4 Segregation Form 4 Segregation Form 4 FH4220 Fairlead plate F4 h=200mm 2 FH4220 Fairlead plate F4 h=200mm 2 FH4430 Fairlead plate F4 h=300mm 1 FH4430 Fairlead plate F4 h=300mm 1 FH4540 Fairlead plate F4 h=400mm 1 FH4540 Fairlead plate F4 h=400mm 1 > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/125 5 ArTu K Modular Structures Examples of configurations ArTu Additional panel Additional panel 5 ArTu K Series Form 3/4 segregation dim.1800x390x700 (2031x538x837) mm (external hxwxd) IP31 with plate for Tmax T5, T3, T2 and modular panels, complete with 1600A busbars vertically on side of structure - Icw max 50kA Code Description Q.ty BA1250 Busbar In=1250A 1 BA1600 Busbar In=1600A 3 IP3040 No.2 hor. finishing sections IP31 w=400mm K 1 IP3180 No.2 vert. finishing sections IP31 h=1800mm K 1 KT2410 T2 3/4P hor. fixed segreg. Kit, K 2 KT3410 T3 3/4P hor. fixed segreg. Kit, K 1 KT5122 T5 segr. hor. fixed Kit 300x400mm(hxw)K 1 LA1880 No.2 ventilated side panels 1800x800mm (hxw) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 5 PC2400 Blind panel 200x400mm (hxw) K 2 PC4400 Blind panel 400x400mm (hxw) K 1 PF2405 Plain plate 200x400mm (hxw) segreg. K 2 PF4405 Plain plate 400x400mm (hxw) segreg. K 1 RF1840 Rear panel 1800x400mm (hxw) K 1 SH4000 Busbar hor. shelf w=400mm, K 2 SH4030 Busbar hor. segregation w=400mm, K 1 SK1800 No.4 ArTu K uprigh ts h=1800mm 1 SK1802 No.2 funct. frames h=1800mm closed K 1 SK4080 ArTu K Base/Top/Base strip 400x800mm (wxd) 1 SV4061 Busbar vert. segregation 200x400mm (hxw) K 1 TV8005 No.2 funct. frame struct. crosspieces d=800mm 3 Segregation Form 3 FH3220 F3 horiz. segreg. Kit 200x600mm (hxw) K 4 FH3430 F3 horiz. segreg. Kit 300x600mm (hxw) K 2 FH3540 F3 horiz. segreg. Kit 400x600mm (hxw) K 1 Segregation Form 4 FH4220 Fairlead plate F4 h=200mm 2 FH4430 Fairlead plate F4 h=300mm 1 FH4540 Fairlead plate F4 h=400mm 1 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/126 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu T T T Additional panel ArTu K Series Form 3/4 segregation dim.2000x800x700 (2231x948x837) mm (external hxwxd) IP65 with plate for Tmax T6, T3, T2, XT3, XT4 and modular panels, complete with 1600A busbars vertically on side of structure Icw max 50kA Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit BA1250 Busbar In=1250A 1 BA1250 Busbar In=1250A 1 BA1600 Busbar In=1600A 3 BA1600 Busbar In=1600A 3 GD7005 DIN rail Kit w=700mm segreg. K, PC 1 GD7005 DIN rail Kit w=700mm segreg. K, PC 1 KT2110 T2 3/4P hor. fixed segreg. Kit, K 2 KY2411 XT2 3/4P hor. fixed segreg. Kit, K 2 KT3110 T3 3/4P hor. fixed segreg. Kit, K 2 KY3411 XT3 3/4P hor. fixed segreg. Kit, K 2 KT6210 T6 vert. fixed segreg. Kit, K 1 KT6210 T6 vert. fixed segreg. Kit, K 1 LA2080 No.2 ventilated side panels 2000x800mm (hxw) K 1 LA2080 No.2 ventilated side panels 2000x800mm (hxw) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 5 PB1601 Linear busbar holder In=1600A (75 kA) 5 PC2600 Blind panel 200x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1 PF2005 Plain plate 200x600mm (hxw) segreg. K 2 PF2005 Plain plate 200x600mm (hxw) segreg. K 2 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 1 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 1 PV2081 Glass door 2000x800mm (hxw) K 1 PV2081 Glass door 2000x800mm (hxw) K 1 RF2080 Rear panel 2000x800mm (hxw) K 1 RF2080 Rear panel 2000x800mm (hxw) K 1 SH2030 Busbar hor. segregation w=600mm, K, PC 1 SH2030 Busbar hor. segregation w=600mm, K, PC 1 SH6000 Busbar hor. shelf w=600mm, K 2 SH6000 Busbar hor. shelf w=600mm, K 2 SK2000 No.4 ArTu K uprights h=2000mm 1 SK2000 No.4 ArTu K uprights h=2000mm 1 SK8080 ArTu K Base/Top/Base strip 800x800mm (wxd) 1 SK8080 ArTu K Base/Top/Base strip 800x800mm (wxd) 1 SV2061 Busbar vert. segregation 200x600mm (hxw) K 1 SV2061 Busbar vert. segregation 200x600mm (hxw) K 1 TV8101 No.2 int./ext. cable cont. crosspieces d=800mm 3 TV8101 No.2 int./ext. cable cont. crosspieces d=800mm 3 VC2020 Cable container int. segreg. 2000x200mm (hxw) K 1 VC2020 Cable container int. segreg. 2000x200mm (hxw) K 1 Segregation Form 3 Segregation Form 3 FH3220 F3 hor iz. segreg. Kit 200x600mm (hxw) K 4 FH3220 F3 hor iz. segreg. Kit 200x600mm (hxw) K 4 FH3430 F3 horiz. segreg. Kit 300x600mm (hxw) K 2 FH3430 F3 horiz. segreg. Kit 300x600mm (hxw) K 2 FV3668 S6 vert. F3 segreg. Kit600x800mm (hxd) 1 FV3668 S6 vert. F3 segreg. Kit600x800mm (hxd) 1 Segregation Form 4 Segregation Form 4 FH4220 Fairlead plate F4 h=200mm 3 FH4220 Fairlead plate F4 h=200mm 3 FH4430 Fairlead plate F4 h=300mm 2 FH4430 Fairlead plate F4 h=300mm 2 FV4668 Fairlead plate F4 vert. d=800mm 1 FV4668 Fairlead plate F4 vert. d=800mm 1 > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/127 5 ArTu K Modular Structures Examples of configurations ArTu ArTu K Series dim. 1800x300x700 (2031x420x837) mm (external hxwxd) IP65 complete with 1250A busbars vertically on side of cable riser - Icw max 50kA 5 Code Description Q.ty AD1014 Lateral side-by-side Kit, K 1 AD1066 No.4 busbar adapters In=800A with busbar holder up to 1600A 2 BA0800 Busbar In=800A 1 BA1250 Busbar In=1250A 3 PB1600 Scaled busbar holder In=1600A (75 kA) 5 PO1831 Blind door 1800x300mm (hxw) L, M int. 1 PO1833 Blind door 1800x300mm (hxw) K ext. 1 RF1830 Cable container rear panel 1800x300mm (hxw) K 1 SK1800 No.4 ArTu K uprights h=1800mm 1 TV8101 No.2 int./ext. cable cont. crosspieces d=800mm 3 VC3080 Cable container 300x800mm (wxd) K 1 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/128 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu ArTu Additional panel Additional panel Additional panel Additional panel SACE Additional panel Additional panel ArTu K Series 2 x dim.2000x1600x700 (2231x1924x837) mm (external hxwxd) IP65 complete with 1600A horizontal and 1250A vertical busbars - Icw max 75kA Code Description Q.ty Description Q.ty AD1014 Lateral side-by-side Kit, K 1 AD1014 Lateral side-by-side Kit, K 1 AD1064 No.12 coupling screws w=27 x flat up to 10mm AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A 4 AD1064 No.12 coupling screws w=27 x flat up to 10mm 4 2 AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A AD1069 2 No.4 connect. coupling busbars from 1250/1600A to 800A 1 AD1069 No.4 connect. coupling busbars from 1250/1600A to 800A 1 BA0800 Busbar In=800A 1 BA0800 Busbar In=800A 1 BA1250 Busbar In=1250A 4 BA1250 Busbar In=1250A 4 BA1600 Busbar In=1600A 3 BA1600 Busbar In=1600A 3 KE3215 Kit per Emax E1, E2, E3 vert. fixed 1 KE3215 Kit per Emax E1, E2, E3 vert. fixed 1 KT2111 T2 Kit 3/4P horiz. fixed without segreg. K 2 KX2611 XT2 Kit 3/4P horiz. fixed without segreg. K 2 KT4111 T4 Kit hor. fixed+access. 200x600mm (hxw) K 2 KX4611 XT4 Kit hor. fixed+access. 200x600mm (hxw) K 2 KT5111 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 3 KT5111 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 3 LF2080 No.2 side panels 2000x800mm (hxd) K 1 LF2080 No.2 side panels 2000x800mm (hxd) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 10 PB1601 Linear busbar holder In=1600A (75 kA) 10 PC2600 Blind panel 200x600mm (hxw) M, K 7 PC2600 Blind panel 200x600mm (hxw) M, K 7 PC3600 Blind panel 300x600mm (hxw) M, K 1 PC3600 Blind panel 300x600mm (hxw) M, K 1 PV2081 Glass door 2000x800mm (hxw) K 2 PV2081 Glass door 2000x800mm (hxw) K 2 RF2080 Rear panel 2000x800mm (hxw) K 2 RF2080 Rear panel 2000x800mm (hxw) K 2 SK2000 No.4 ArTu K uprights h=2000mm 2 SK2000 No.4 ArTu K uprights h=2000mm 2 SK8080 ArTu K Base/Top/Base strip 800x800mm (wxd) 2 SK8080 ArTu K Base/Top/Base strip 800x800mm (wxd) 2 TV8001 No.2 open frame structure crosspieces d=800mm 3 TV8001 No.2 open frame structure crosspieces d=800mm 3 TV8211 No.2 structure crosspieces w=800mm 2 TV8211 No.2 structure crosspieces w=800mm 2 VC2023 Internal cable cont.2000x200mm (hxw) K 2 VC2023 Internal cable cont.2000x200mm (hxw) K 2 Tmax T kit Code Tmax XT kit > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/129 5 ArTu K Modular Structures Examples of configurations ArTu ArTu Additional panel Additional panel Additional panel Additional panel SACE Additional panel Additional panel ArTu K Series 2 x dim.2000x1600x700 (2231x1924x837) mm (external hxwxd) IP65 complete with 3200A horizontal and 1250A vertical busbars - Icw max 75kA 5 Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit AD1014 Lateral side-by-side Kit, K 1 AD1014 Lateral side-by-side Kit, K 1 AD1064 No.12 coupling screws w=27 x flat up to 10mm 4 AD1064 No.12 coupling screws w=27 x flat up to 10mm 4 AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A 2 AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A 2 AD1078 No.4 connect. coupling busbars from 3200A to 1600/1250A 2 AD1078 No.4 connect. coupling busbars from 3200A to 1600/1250A 2 BA0800 Busbar In=800A 2 BA0800 Busbar In=800A 2 BA1250 Busbar In=1250A 6 BA1250 Busbar In=1250A 6 BA2000 Busbar In=2000A 7 BA2000 Busbar In=2000A 7 KE3215 Kit per Emax E1, E2, E3 vert. fixed 1 KE3215 Kit per Emax E1, E2, E3 vert. fixed 1 KT2111 T2 Kit 3/4P horiz. fixed without segreg. K 2 KX2611 XT2 Kit 3/4P horiz. fixed without segreg. K 2 KT4111 T4 Kit hor. fixed+access. 200x600mm (hxw) K 2 KX4611 XT4 Kit hor. fixed+access. 200x600mm (hxw) K 2 KT5111 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 3 KT5111 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 3 LF2080 No.2 side panels 2000x800mm (hxd) K 1 LF2080 No.2 side panels 2000x800mm (hxd) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 14 PB1601 Linear busbar holder In=1600A (75 kA) 14 PB3201 Linear busbar holder In=3200A (75 kA) 6 PB3201 Linear busbar holder In=3200A (75 kA) 6 PC2600 Blind panel 200x600mm (hxw) M, K 7 PC2600 Blind panel 200x600mm (hxw) M, K 7 PC3600 Blind panel 300x600mm (hxw) M, K 1 PC3600 Blind panel 300x600mm (hxw) M, K 1 PV2081 Glass door 2000x800mm (hxw) K 2 PV2081 Glass door 2000x800mm (hxw) K 2 RF2080 Rear panel 2000x800mm (hxw) K 2 RF2080 Rear panel 2000x800mm (hxw) K 2 SK2000 No.4 ArTu K uprights h=2000mm 2 SK2000 No.4 ArTu K uprights h=2000mm 2 SK8080 ArTu K Base/Top/Base strip 800x800mm (wxd) 2 SK8080 ArTu K Base/Top/Base strip 800x800mm (wxd) 2 TV8001 No.2 Open frame struct. crosspieces d=800mm 3 TV8001 No.2 Open frame struct. crosspieces d=800mm 3 TV8211 No.2 structure crosspieces w=800mm 3 TV8211 No.2 structure crosspieces w=800mm 3 VC2023 Int. reduced cable cont.2000x200mm (hxw) K 2 VC2023 Int. reduced cable cont.2000x200mm (hxw) K 2 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/130 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu ArTu K Series dim. 2000x600x500 (2231x748x637) mm (external hxwxd) IP65 with back plate h=2000 Code Description Q.ty AD1050 No.2 pair of tracks x back plate w=600mm 1 LF2060 No.2 side panels 2000x600mm (hxd) K 1 PF2006 Plain plate 2000x600mm (hxw) K 1 PO2061 Blind door 2000x600mm (hxw) K 1 RF2060 Rear panel 2000x600mm (hxw) K 1 SK2000 No.4 ArTu K uprights h=2000mm 1 SK6060 ArTu K Base/Top/Base strip 600x600mm (wxd) 1 > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/131 5 ArTu K Modular Structures Examples of configurations ArTu ArTu ArTu SACE Additional panel Additional panel Additional panel Additional panel Additional panel Additional panel Additional panel Additional panel ArTu K Series dim. 1800x1580x700 (2031x1984x837) mm (external hxwxd) IP65 with Emax E1, T5, T3, XT3, 1600A omnibus busbars and vertical 800A branches - Icw 50kA 5 Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit AD1014 Lateral side-by-side Kit, K 2 AD1014 Lateral side-by-side Kit, K 2 AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A 4 AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A 4 AD1069 No.4 connect. coupling busbars from 1250/1600A to 800A 2 AD1069 No.4 connect. coupling busbars from 1250/1600A to 800A 2 BA0800 Busbar In=800A 4 BA0800 Busbar In=800A 4 BA1600 Busbar In=1600A 10 BA1600 Busbar In=1600A 10 KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 1 KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 1 KT3419 XT3 Kit 3/4P horiz. fixed without segreg. K 2 KX3411 T3 Kit 3/4P horiz. fixed without segreg. K 2 KT5411 T5 Kit horiz. fixed 300x400mm (hxw) K 4 KT5411 T5 Kit horiz. fixed 300x400mm (hxw) K 4 LF1880 No.2 side panels 1800x800mm (hxd) K 1 LF1880 No.2 side panels 1800x800mm (hxd) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 8 PB1601 Linear busbar holder In=1600A (75 kA) 8 PC2400 Blind panel 200x400mm (hxw) K 10 PC2400 Blind panel 200x400mm (hxw) K 10 PC2600 Blind panel 200x600mm (hxw) M, K 2 PC2600 Blind panel 200x600mm (hxw) M, K 2 PC6600 Blind panel 600x600mm (hxw) M, K 1 PC6600 Blind panel 600x600mm (hxw) M, K 1 PS4720 4-instrument panel 72x72 200x600mm (hxw) M, K 1 PS4720 4-instrument panel 72x72 200x600mm (hxw) M, K 1 PV1841 Glass door 1800x400mm (hxw) K 2 PV1841 Glass door 1800x400mm (hxw) K 2 PV1881 Glass door 1800x800mm (hxw) K 1 PV1881 Glass door 1800x800mm (hxw) K 1 RF1840 Rear panel 1800x400mm (hxw) K 2 RF1840 Rear panel 1800x400mm (hxw) K 2 RF1880 Rear panel 1800x800mm (hxw) K 1 RF1880 Rear panel 1800x800mm (hxw) K 1 SK1800 No.4 ArTu K uprights h=1800mm 3 SK1800 No.4 ArTu K uprights h=1800mm 3 SK1803 No.2 funct. frames h=1800mm open K 2 SK1803 No.2 funct. frames h=1800mm open K 2 SK1880 Open frame int. cable cont. rear assembly h=1800mm 1 SK1880 Open frame int. cable cont. rear assembly h=1800mm 1 SK4080 ArTu K Base/Top/Base strip 400x800mm (wxd) 2 SK4080 ArTu K Base/Top/Base strip 400x800mm (wxd) 2 SK8080 ArTu K Base/Top/Base strip 800x800mm (wxd) 1 SK8080 ArTu K Base/Top/Base strip 800x800mm (wxd) 1 TV6221 No.2 funct. frame struct. crosspieces w=600mm 1 TV6221 No.2 funct. frame struct. crosspieces w=600mm 1 TV8001 No.2 Open frame struct. crosspieces d=800mm 2 TV8001 No.2 Open frame struct. crosspieces d=800mm 2 TV8011 No.2 structure crosspieces d=800mm 1 TV8011 No.2 structure crosspieces d=800mm 1 TV8211 No.2 structure crosspieces w=800mm 2 TV8211 No.2 structure crosspieces w=800mm 2 VC1823 Int. reduced cable cont.1800x200mm (hxw) K 1 VC1823 Int. reduced cable cont.1800x200mm (hxw) K 1 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/132 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu SACE ArTu ArTu ArTu ArTu SACE SACE Additional panel Additional panel Additional panel Additional panel ArTu K Series dim. 1800x2280x700 (2031x2904x837) mm (external hxwxd) IP65 with Emax E1, T5, T3, XT3 1600A omnibus busbars and vertical 1250A branches - Icw 50kA Code Description Q.ty Description Q.ty AD1014 Lateral side-by-side Kit, K 4 AD1014 Lateral side-by-side Kit, K 4 AD1069 No.4 connect. coupling busbars from 1250/1600A to 800A BA1250 Busbar In=1250A 3 AD1069 No.4 connect. coupling busbars from 1250/1600A to 800A 3 4 BA1250 Busbar In=1250A BA1600 4 Busbar In=1600A 12 BA1600 Busbar In=1600A 12 KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 3 KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 3 KT3419 T3 Kit 3/4P horiz. fixed without segreg. K 4 KX3411 XT3 Kit 3/4P horiz. fixed without segreg. K 4 KT5411 T5 Kit horiz. fixed 300x400mm (hxw) K 4 KT5411 T5 Kit horiz. fixed 300x400mm (hxw) K 4 LF1880 No.2 side panels 1800x800mm (hxd) K 1 LF1880 No.2 side panels 1800x800mm (hxd) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 10 PB1601 Linear busbar holder In=1600A (75 kA) 10 PC2400 Blind panel 200x400mm (hxw) K 8 PC2400 Blind panel 200x400mm (hxw) K 8 PC2600 Blind panel 200x600mm (hxw) M, K 5 PC2600 Blind panel 200x600mm (hxw) M, K 5 PC6600 Blind panel 600x600mm (hxw) M, K 1 PC6600 Blind panel 600x600mm (hxw) M, K 1 PO1831 Blind door 1800x300mm (hxw) L, M int. 1 PO1831 Blind door 1800x300mm (hxw) L, M int. 1 PO1833 Blind door 1800x300mm (hxw) K ext. 1 PO1833 Blind door 1800x300mm (hxw) K ext. 1 PS4720 4-instrument panel 72x72 200x600mm (hxw)M, K 1 PS4720 4-instrument panel 72x72 200x600mm (hxw)M, K 1 PV1841 Glass door 1800x400mm (hxw) K 2 PV1841 Glass door 1800x400mm (hxw) K 2 PV1861 Glass door 1800x600mm (hxw) K 2 PV1861 Glass door 1800x600mm (hxw) K 2 RF1830 Cable container rear panel 1800x300mm (hxw) K 1 RF1830 Cable container rear panel 1800x300mm (hxw) K 1 RF1840 Rear panel 1800x400mm (hxw) K 2 RF1840 Rear panel 1800x400mm (hxw) K 2 RF1860 Rear panel 1800x600mm (hxw) K 2 RF1860 Rear panel 1800x600mm (hxw) K 2 SK1800 No.4 ArTu K uprights h=1800mm 5 SK1800 No.4 ArTu K uprights h=1800mm 5 SK1803 No.2 funct. frames h=1800mm open K 4 SK1803 No.2 funct. frames h=1800mm open K 4 SK4080 ArTu K Base/Top/Base strip 400x800mm (wxd) 2 SK4080 ArTu K Base/Top/Base strip 400x800mm (wxd) 2 SK6080 ArTu K Base/Top/Base strip 600x800mm (wxd) 2 SK6080 ArTu K Base/Top/Base strip 600x800mm (wxd) 2 TV6221 No.2 funct. frame struct. crosspieces w=600mm 2 TV6221 No.2 funct. frame struct. crosspieces w=600mm 2 TV8001 No.2 Open frame struct. crosspieces d=800mm 2 TV8001 No.2 Open frame struct. crosspieces d=800mm 2 TV8011 No.2 structure crosspieces d=800mm 2 TV8011 No.2 structure crosspieces d=800mm 2 TV8211 No.2 structure crosspieces w=800mm 2 TV8211 No.2 structure crosspieces w=800mm 2 VC3080 Cable container 300x800mm (wxd) K 1 VC3080 Cable container 300x800mm (wxd) K 1 Tmax T kit Code Tmax XT kit > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/133 5 ArTu K Modular Structures Examples of configurations ArTu ArTu ArTu SACE Additional panel Additional panel Additional panel Additional panel Additional panel Additional panel ArTu K Series dim. 1800x2400x700 (2031x2784x837) mm (external hxwxd) IP65 with Emax E1, T4 , T1, XT4, XT1, 1600A omnibus busbars and vertical 1250A branches - Icw 50kA 5 Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit AD1014 Lateral side-by-side kit, K 2 AD1014 Lateral side-by-side kit, K 2 AD1069 No.4 connect. coupling busbars from 1250/1600A to 800A 3 AD1069 No.4 connect. coupling busbars from 1250/1600A to 800A 3 BA1250 Busbar In=1250A 5 BA1250 Busbar In=1250A 5 BA1600 Busbar In=1600A 11 BA1600 Busbar In=1600A 11 KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 1 KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 1 KT1111 Kit T1 3/4P horiz. fixed without segreg. K 2 KX1611 Kit XT1 3/4P horiz. fixed without segreg. K 2 KT4111 T4 Kit hor. fixed+access.200x600mm (hxw) K 6 KX4611 XT4 Kit hor. fixed+access.200x600mm (hxw) K 6 LF1880 No.2 side panels 1800x800mm (hxd) K 1 LF1880 No.2 side panels 1800x800mm (hxd) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 12 PB1601 Linear busbar holder In=1600A (75 kA) 12 PC2600 Blind panel 200x600mm (hxw) M, K 6 PC2600 Blind panel 200x600mm (hxw) M, K 6 PC3600 Blind panel 300x600mm (hxw) M, K 4 PC3600 Blind panel 300x600mm (hxw) M, K 4 PC6600 Blind panel 600x600mm (hxw) M, K 1 PC6600 Blind panel 600x600mm (hxw) M, K 1 PS4720 4-instrument panel 72x72 200x600mm (hxw)M, K 1 PS4720 4-instrument panel 72x72 200x600mm (hxw)M, K 1 PV1881 Glass door 1800x800mm (hxw) K 3 PV1881 Glass door 1800x800mm (hxw) K 3 RF1880 Rear panel 1800x800mm (hxw) K 3 RF1880 Rear panel 1800x800mm (hxw) K 3 SK1800 No.4 ArTu K uprights h=1800mm 3 SK1800 No.4 ArTu K uprights h=1800mm 3 SK1880 Open frame int. cable cont. rear assembly h=1800mm 1 SK1880 Open frame int. cable cont. rear assembly h=1800mm 1 SK8080 ArTu K Base/Top/Base strip 800x800mm (wxd) 3 SK8080 ArTu K Base/Top/Base strip 800x800mm (wxd) 3 TV6221 No.2 funct. frame struct. crosspieces w=600mm 1 TV6221 No.2 funct. frame struct. crosspieces w=600mm 1 TV8001 No.2 open frame struct. crosspieces d=800mm 2 TV8001 No.2 open frame struct. crosspieces d=800mm 2 TV8011 No.2 structure crosspieces d=800mm 1 TV8011 No.2 structure crosspieces d=800mm 1 TV8211 No.2 structure crosspieces w=800mm 1 TV8211 No.2 structure crosspieces w=800mm 1 VC1823 Int. reduced cable cont.1800x200mm (hxw) K 3 VC1823 Int. reduced cable cont.1800x200mm (hxw) K 3 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/134 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 ArTu SACE ArTu ArTu ArTu ArTu SACE SACE SACE Additional panel Additional panel Additional panel Additional panel ArTu K Series dim. 1800x2280x700 (2031x2900x837) mm (external hxwxd) IP65 with Emax E2, T5, T3, XT3 3200A omnibus busbars and vertical 1600A branches - Icw 65kA Code Description Q.ty Description Q.ty AD1014 Lateral side-by-side Kit, K 4 AD1014 Lateral side-by-side Kit, K 4 AD1073 No.4 busbar section T-couplings 3200A AD1078 No.4 connect. coupling busbars from 3200A to 1600/1250A 1 AD1073 No.4 busbar section T-couplings 3200A 1 1 AD1078 No.4 connect. coupling busbars from 3200A to 1600/1250A BA1600 1 Busbar In=1600A 4 BA1600 Busbar In=1600A 4 BA2000 Busbar In=2000A 20 BA2000 Busbar In=2000A 20 KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 4 KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 4 KT3419 T3 Kit 3/4P horiz. fixed without segreg. K 3 KX3411 XT3 Kit 3/4P horiz. fixed without segreg. K 3 KT5411 T5 Kit horiz. fixed 300x400mm (hxw) K 4 KT5411 T5 Kit horiz. fixed 300x400mm (hxw) K 4 LF1880 No.2 side panels 1800x800mm (hxd) K 1 LF1880 No.2 side panels 1800x800mm (hxd) K 1 PB1601 Linear busbar holder In=1600A (75 kA) 6 PB1601 Linear busbar holder In=1600A (75 kA) 6 PB3201 Linear busbar holder In=3200A (75 kA) 12 PB3201 Linear busbar holder In=3200A (75 kA) 12 PC2400 Blind panel 200x400mm (hxw) K 8 PC2400 Blind panel 200x400mm (hxw) K 8 PC2600 Blind panel 200x600mm (hxw) M, K 5 PC2600 Blind panel 200x600mm (hxw) M, K 5 PO1831 Blind door 1800x300mm (hxw) L, M int. 1 PO1831 Blind door 1800x300mm (hxw) L, M int. 1 PO1833 Blind door 1800x300mm (hxw) K ext. 1 PO1833 Blind door 1800x300mm (hxw) K ext. 1 PS4720 4-instrument panel 72x72 200x600mm (hxw) M, K 1 PS4720 4-instrument panel 72x72 200x600mm (hxw) M, K 1 PV1841 Glass door 1800x400mm (hxw) K 2 PV1841 Glass door 1800x400mm (hxw) K 2 PV1861 Glass door 1800x600mm (hxw) K 2 PV1861 Glass door 1800x600mm (hxw) K 2 RF1830 Cable container rear panel 1800x300mm (hxw) K 1 RF1830 Cable container rear panel 1800x300mm (hxw) K 1 RF1840 Rear panel 1800x400mm (hxw) K 2 RF1840 Rear panel 1800x400mm (hxw) K 2 RF1860 Rear panel 1800x600mm (hxw) K 2 RF1860 Rear panel 1800x600mm (hxw) K 2 SK1800 No.4 ArTu K uprights h=1800mm 5 SK1800 No.4 ArTu K uprights h=1800mm 5 SK1803 No.2 funct. frames h=1800mm open K 4 SK1803 No.2 funct. frames h=1800mm open K 4 SK1880 Open frame int. cable cont. rear assembly h=1800mm 1 SK1880 Open frame int. cable cont. rear assembly h=1800mm 1 SK4080 ArTu K Base/Top/Base strip 400x800mm (wxd) 2 SK4080 ArTu K Base/Top/Base strip 400x800mm (wxd) 2 SK6080 ArTu K Base/Top/Base strip 600x800mm (wxd) 2 SK6080 ArTu K Base/Top/Base strip 600x800mm (wxd) 2 TV6221 No.2 funct. frame struct. crosspieces w=600mm 2 TV6221 No.2 funct. frame struct. crosspieces w=600mm 2 TV8001 No.2 open frame struct. crosspieces d=800mm 3 TV8001 No.2 open frame struct. crosspieces d=800mm 3 TV8011 No.2 structure crosspieces d=800mm 2 TV8011 No.2 structure crosspieces d=800mm 2 TV8101 No.2 int./ext. cable cont. crosspieces d=800mm 3 TV8101 No.2 int./ext. cable cont. crosspieces d=800mm 3 TV8211 No.2 structure crosspieces w=800mm 2 TV8211 No.2 structure crosspieces w=800mm 2 VC3080 Cable container 300x800mm (wxd) K 2 VC3080 Cable container 300x800mm (wxd) K 2 Tmax T kit Code Tmax XT kit > Rapid selection table page 5/6 > In-depth technical information page 6/1 > Overall dimensions page 7/1 Technical catalogue | 1STC008001D0204 5/135 5 ArTu K Modular Structures Examples of configurations ArTu ArTu Additional panel ArTu ArTu ArTu ArTu ArTu ArTu ArTu Additional panel SACE SACE SACE SACE SACE Additional panel SACE SACE Additional panel Additional panel Additional Riserva panel Additional panel Additional Riserva panel ArTu K Series dim. 1800x4680x900 (2031x5804x1037) mm. (external hxwxd) IP65 with Emax E3, T5, T3, XT3, 3200A omnibus busbars and vertical 1600A branches - Icw 50kA 5 Code Description Q.ty Tmax T kit Code Description Q.ty Tmax XT kit AD1014 Lateral side-by-side Kit, K 8 AD1014 Lateral side-by-side Kit, K 8 BP1600 No.2 busbar holders x cross-section 10mm 9 BP1600 No.2 busbar holders x cross-section 10mm 9 BP3200 No.2 busbar holders 3 phase busbars cross-sect. 10mm 6 BP3200 No.2 busbar holders 3 phase busbars cross-sect. 10mm 6 BR1600 No.2 busbars cross-section100x10mm w=1750mm 29 BR1600 No.2 busbars cross-section100x10mm w=1750mm 29 KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 7 KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 7 KT3119 T3 Kit 3/4P horiz. fixed without segreg. K 3 KX3611 XT3 Kit 3/4P horiz. fixed without segreg. K 3 KT3419 T3 Kit 3/4P horiz. fixed without segreg. K 4 KX3611 XT3 Kit 3/4P horiz. fixed without segreg. K 4 KT5111 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 6 KT5111 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 6 KT5411 T5 Kit horiz. fixed 300x400mm (hxw) K 4 KT5411 T5 Kit horiz. fixed 300x400mm (hxw) K 4 LF1810 No.2 side panels 1800x1000mm (hxd) K 1 LF1810 No.2 side panels 1800x1000mm (hxd) K 1 PC2400 Blind panel 200x400mm (hxw) K 8 PC2400 Blind panel 200x400mm (hxw) K 8 PC2600 Blind panel 200x600mm (hxw) M, K 16 PC2600 Blind panel 200x600mm (hxw) M, K 16 PC6600 Blind panel 600x600mm (hxw) M, K 1 PC6600 Blind panel 600x600mm (hxw) M, K 1 PO1831 Blind door 1800x300mm (hxw) L, M int. 1 PO1831 Blind door 1800x300mm (hxw) L, M int. 1 PO1833 Blind door 1800x300mm (hxw) K ext. 1 PO1833 Blind door 1800x300mm (hxw) K ext. 1 PS4720 4-instrument panel 72x72 200x600mm (hxw) M, K 2 PS4720 4-instrument panel 72x72 200x600mm (hxw) M, K 2 PV1841 Glass door 1800x400mm (hxw) K 2 PV1841 Glass door 1800x400mm (hxw) K 2 PV1861 Glass door 1800x600mm (hxw) K 6 PV1861 Glass door 1800x600mm (hxw) K 6 RF1830 Cable container rear panel 1800x300mm (hxw) K 1 RF1830 Cable container rear panel 1800x300mm (hxw) K 1 RF1840 Rear panel 1800x400mm (hxw) K 2 RF1840 Rear panel 1800x400mm (hxw) K 2 RF1860 Rear panel 1800x600mm (hxw) K 6 RF1860 Rear panel 1800x600mm (hxw) K 6 SK1800 No.4 ArTu K uprights h=1800mm 9 SK1800 No.4 ArTu K uprights h=1800mm 9 SK1803 No.2 funct. frames h=1800mm open K 8 SK1803 No.2 funct. frames h=1800mm open K 8 SK4010 ArTu K Base/Top/Base strip 390x1000mm (wxd) 2 SK4010 ArTu K Base/Top/Base strip 390x1000mm (wxd) 2 SK6010 ArTu K Base/Top/Base strip 600x1000mm (wxd) 6 SK6010 ArTu K Base/Top/Base strip 600x1000mm (wxd) 6 TR1201 No.2 hor. struct. busbar crosspieces d=1000mm 6 TR1201 No.2 hor. struct. busbar crosspieces d=1000mm 6 TV1001 No.2 open frame struct. crosspieces d=1000mm 15 TV1001 No.2 open frame struct. crosspieces d=1000mm 15 TV1211 No.2 structure crosspieces d=1000mm 6 TV1211 No.2 structure crosspieces d=1000mm 6 VC3010 ArTu K Base/Top/Base strip 300x1000mm (wxd) 1 VC3010 ArTu K Base/Top/Base strip 300x1000mm (wxd) 1 > Rapid selection table page 5/6 > In-depth technical information page 6/1 5/136 1STC008001D0204 | Technical catalogue > Overall dimensions page 7/1 In-depth technical information Gemini Compliance with Standards and technical characteristics 6/2 IP degree of protection 6/4 IK degree of resistance to impacts 6/5 Double insulation 6/6 Self-extinguishing tests 6/6 Resistance to chemical agents 6/7 Disposal instructions 6/8 ArTu distribution switchgear Mechanical and electrical characteristics 6/10 Declaration of conformity 6/12 Dissipated power 6/13 Handling 6/21 Electrical continuity 6/23 Equipotential conductors 6/24 Degrees of protection 6/26 IK mechanical resistance to impact 6/28 Busbars with shaped section and flat busbars Mechanical and electrical characteristics 6/29 Busbar with shaped section Busbar holders 6/30 Components 6/32 Flat busbar 6/34 Components 6/35 Unifix cabling system Examples of connections - Unifix H 6/36 Examples of connections - Unifix L 6/37 Segregations Examples of ArTu segregation 6/38 Special painting RAL colour 6/39 ABB Technical catalogue | 1STC008001D0204 6/1 6 In-depth technical information Gemini switchboards Compliance with Standards and technical characteristics References Standard The IEC 62208 Standard (“Empty enclosures for assembled protection and operating apparatus for low voltage. General Prescriptions”) has implemented the EN 50298 Standard reissued in EN 62208 internationally, and is the reference for the Gemini switchboards: as its subject, it has formulation of the definitions, classifications, characteristics and testing prescriptions for enclosures destined for uses in accordance with the EN 60439 Standards and the new IEC 61439-1-2 Standard as part of protection and operating apparatus (switchboards), whose rated voltage does not exceed 1000 V in alternating current for frequencies up to 1000 Hz or 1500 V in direct current and suitable for general use in both indoor and outdoor applications. The Standard refers to empty enclosures, before the user installs protection and operating apparatus. The Standard does not apply to enclosures which, due to their construction and functional characteristics, are subject to other prescriptions (e.g. enclosures for domestic and similar installations). In this case, the IEC 60670 – CEI 23-48 Standards are the reference (“Enclosures for apparatus for fixed electrical installations for domestic and similar uses. 6 Part 1: general prescriptions”) and CEI 23-49 (“Enclosures for apparatus for fixed electrical installations for domestic and similar uses. Part 2: special prescriptions for enclosures destined to contain protection devices and apparatus which dissipate a power that is not negligible”). On the basis of what is indicated by ABB SACE in the table of technical characteristics, if, necessary, the installer must certify conformity with the CEI 23-51 (“Prescriptions for constructing, checking and testing distribution switchboards for fixed installations for domestic and similar use”) or EN 60439-1/IEC 61439-1-2 Standards. 6/2 1STC008001D0204 | ABB Technical catalogue Compliance with Standards and technical characteristics Table of Gemini switchboards’ technical characteristics Size 1 2 3 4 5 6 Gemini with transparent door 1SL0211A00 1SL0212A00 1SL0213A00 1SL0214A00 1SL0215A00 1SL0216A00 Gemini with opaque door 1SL0201A00 1SL0202A00 1SL0203A00 1SL0204A00 1SL0205A00 1SL0206A00 External dimensions WxHxD (mm) 335x400x210 460x550x260 460x700x260 590x700x260 590x855x360 840x1005x360 Internal dimensions WxHxD (mm) 250x300x180 375x450x230 375x600x230 500x600x230 500x750x330 750x900x330 IP degree IP66 IP66 IP66 IP66 IP66 IP66 Double isolation yes yes yes yes yes yes IK degree 10 10 10 10 10 10 GWT (°C) 750 750 750 750 750 750 Operating temperature -25 °C … +100 °C -25 °C … +100 °C -25 °C … +100 °C -25 °C … +100 °C -25 °C … +100 °C -25 °C … +100 °C No. of DIN modules 24 (12x2) 54 (18x3) 72 (18x4) 96 (24x4) 120 (24x5) 216 (36x6) No. of vertical modules (H=150 mm) 2 3 4 4 5 6 Material Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Color Grey RAL7035 Grey RAL7035 Grey RAL7035 Grey RAL7035 Grey RAL7035 Grey RAL7035 Fast wiring system Unifix L Unifix L Unifix L Unifix L Unifix L Unifix L No. of locks 2 2 2 2 3 3 Rated frequency 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz 45 W 72 W 85 W 102 W 156 W 248 W Max. dispersible power with over-temperature of 25 °C 40 W 65 W 77 W 91 W 133 W 205 W Max. dispersible power with over-temperature of 30 °C 45 W 72 W 85 W 102 W 156 W 248 W Max. dispersible power with over-temperature of 35 °C 52 W 85 W 100 W 121 W 187 W 299 W Max. dispersible power with over-temperature of 40 °C 62 W 100 W 118 W 143 W 221 W 355 W - Rated service voltage ≤ 690 V ≤ 690 V ≤ 690 V ≤ 690 V ≤ 690 V ≤ 690 V - Rated insulation voltage AC ≤ 1000 V ≤ 1000 V ≤ 1000 V ≤ 1000 V ≤ 1000 V ≤ 1000 V - Rated insulation voltage DC ≤ 1500 V ≤ 1500 V ≤ 1500 V ≤ 1500 V ≤ 1500 V ≤ 1500 V - Rated impulse withstand voltage 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 6 (1) NORMA CEI 23-51 - IEC 61439-1-2 Max. potenza dissipabile (2) STANDARD CEI EN 60439-1 Over-temperature (par. 8.2.1) (3) Impulse withstand (par. 8.2.2) (1) Limits of Applicability of the CEI 23-51 Standard The Standard is only applicable if the cabled switchboard fulfils all the following conditions: fixed installation with average ambient temperature up to 25 °C, occasionally up to 35 °C; alternating current with rated voltage up to 440 V; rated incoming current up to 125 A; rated prospective short-circuit current up to 10 kA or protection using current-limiting devices with limited current up to 15 kA in correspondence with their rated breaking capacity. (2) The data on the maximum dissipated power were taken following the indications in the CEI 23-49 Standard, with a temperature difference of Dt=30 °C. (3) Note to paragraph 8.2.1 of Standard CEI EN 60439-1 The table gives the thermal dissipation values of Gemini switchboards when they are wall-mounted. The dispersible power figures (in Watts) vary according to the overtemperature allowed in the accessible parts of the switchboard and must be compared with the total amount of power dissipated by all the components installed inside the switchboard taking into due account the factor of contemporaneity. ABB Technical catalogue | 1STC008001D0204 6/3 In-depth technical information Gemini switchboards IP degree of protection 1st number according to EN 60529 Standard As indicated in the following table, the IP degree of protection is expressed by two characteristic numbers depending on the behaviorof the product to which it refers according to the prescriptions of CEI 70-1 and IEC 529 Standards. 2nd number according to CEI 70-1 IEC 60529 Standard With IP66 degree of protection, Gemini switchboards are totally protected against the penetration of dusts and sprays of seawater. 1st Number: protection against the penetration of solid bodies 2nd Number: protection against the penetration of water 1 1 No protection 2 ø 50mm Protection against the penetration of solid bodies with a diameter of over 50 mm 6 3 4 ø 2,5mm 5 ø 1mm 6 ø 12mm Protection against the penetration of solid bodies with a diameter of over 12 mm or a length of over 80 mm Protection against the penetration of solid bodies with a diameter or thickness of over 2.5 mm Protection against the penetration of solid bodies with a diameter or thickness of over 1.0 mm Gemini No protection 2 Protection against the penetration of drops of water falling vertically 3 4 15° Protection against the penetration of drops of water falling at an angle of up to 15° from vertical 60° Protection against the penetration of drops of water falling at an angle of up to 60° from vertical 5 Protection against the penetration of splashes of water from all directions 6 Protection against the penetration of water sprayed by a hose from all directions Protection against the penetration of dusts 7 7 Total protection against the penetration of dusts Protection against the penetration of sea water 8 15cm Protection against the penetration of water during temporary immersion 9 Protection against the penetration of water during continual immersion 6/4 1STC008001D0204 | ABB Technical catalogue IK degree of resistance to impacts IK degree according to EN 62262 reference Standard. The method specified in the EN 62262 Standard to determine the IK degree of resistance to impact is indicated in the table below. It specifies the resistance of equipment to impact. The proof consists in let a weight falling down from a pre-established height. The degree of resistance to impacts is therefore obtained and it is expressed in Joules IK 0 IK 06 IK 03 140 mm 80 mm IK 02 200 mm IK 04 280 mm IK 05 0,25 kg Resistance to impacts with impact energy up to 0,200 J 0,25 kg Resistance to impacts with impact energy up to 0,350 J 0,25 kg Resistance to impacts with impact energy up to 0,500 J 400 mm 400 mm IK 08 300 mm Resistance to impacts with impact energy up to 0,150 J IK 07 IK 09 200 mm 0,25 kg IK 10 400 mm IK 01 56 mm No protection against impacts 0,25 kg Resistance to impacts with impact energy up to 1,00 J 0,50 kg 6 Resistance to impacts with impact energy up to 2,00 J 1,7 kg Resistance to impacts with impact energy up to 5,00 J 5 kg Resistance to impacts with impact energy up to 10,00 J 5 kg Gemini Resistance to impacts with impact energy up to 20,00 J 0,25 kg Resistance to impacts with impact energy up to 0,700 J ABB Technical catalogue | 1STC008001D0204 6/5 In-depth technical information Gemini switchboards Double insulation Double insulation guarantees that Gemini is protected against indirect contacts on condition that the manufacturer’s instructions are observed when carrying out mounting and wiring operations on the switchboard and that the appropriate accessories are used (e.g. screw-cover caps). Self-extinguishing tests Test text Equipment Compliance with Standards Purpose Test of the test results Glow wire IEC 695-2-1 (GLOW WIRE CEI 50-11 required TEST) 6 Test conditions Heat Length Character. To assess the danger of If a flame is generated, source Glow wire elements Assessment fire by simulating it must go out within ø 4 mm thermal 30 seconds of removing it takes for stresses produced the glow wire. the flame to by heat sources or The test is conducted go out by ignition (e.g. glowing at temperatures of: elements, resistances - 650°C overloaded for short - 750°C intervals) - 850°C - 960°C 6/6 1STC008001D0204 | ABB Technical catalogue of test 30 sec. of the time Resistance to chemical agents The behavior of Gemini switchboards in the presence of chemical agents is indicated in the table with the symbols: High resistance Cold water Hot water Sulfuric acid 50% Hydrochloric acid 36% Acetic acid 60% Benzol Limited resistance Gasoline Acetone Ethyl alcohol Ammonia Dichlromethane Diesel oil - naphtha Mineral oils and greases Food oils and greases Perchloroethylene Trichlorethene Ethylether Toluene Methanol 6 Wine Fruit juices Laundry lye Detergents ABB Technical catalogue | 1STC008001D0204 6/7 In-depth technical information Gemini switchboards Disposal instructiones Information about how to dispose of Gemini switchboards when they reach the end of their life Instructions are given below about the procedures to adopt when disposing of Gemini switchboards at the end of their life cycle. The text is drafted in the form of a table referring to Standard CEI 308-1 “Information table concerning the end of life of electric and electronic products and a compilation guide”, 2002-04, ed. 1, pamphlet number 308-1 6454. Section I – Global product specification Name Type of product Rated weight External dimensions Size With transparent door With opaque door [kg] WxHxD (mm) 1 1SL0211A00 1SL0201A00 4,3 335x400x210 2 1SL0212A00 1SL0202A00 7,9 460x550x260 3 1SL0213A00 1SL0203A00 9,5 460x700x260 4 1SL0214A00 1SL0204A00 12,0 590x700x260 5 1SL0215A00 1SL0205A00 17,8 590x855x360 6 1SL0216A00 1SL0206A00 21,1 840x1005x360 6 Section II – Global product table General code: CER 17 02 03 plastic (more than 95% of the product’s weight) No. of the Quantity component part P1, P2, etc.) P1/BOX Diagram % over Material total weight description P5/ACCESSORIES Dangerousness Symbol Polypropylene P2/ROOF (Yes/No) CER Code No 17 02 03 No 17 02 03 No 17 02 03 >PP< 80% Polypropylene P2/ROOF >PP< 20% P3/DOOR Polycarbonate >PC< P4/ACCESSORIES < 5% Steel - No 17 04 05 < 5% Brass - No 17 04 01 P3/DOOR P1/BOX P5/ACCESSORIES P4/ACCESSORIES 6/8 1STC008001D0204 | ABB Technical catalogue Disposal instructiones Section III – Components to be removed from the product and sent for separate treatment Refer to section II of the table for a description of the materials. Notes for recovery and disposal At the end of its life, after separating it from components, the product can be sent to be recovered. The product is not biodegradable: do not dispose of it in the environment. The product/waste product is assimilable as solid urban waste. It must be incinerated or disposed of in compliance with current EEC, national and local regulations. You are recommended to check all reutilization possibilities. Other recommendations The information in this table relates to the product in the condition it was supplied. Assembled parts coming from different supplies must be treated separately according to the reference specifications of the respective manufacturers. 6 Section IV – Safety instructions Handling No special instructions. Refer to the general regulations concerning hygiene on the workplace when using. The product’s main components contain mineral additives and coloring agents in concentrations that comply with current European Directives at the time this catalogue went to press: they do not contain substances classified as dangerous. Transport No special instructions. Storage No gas or harmful vapors are released during storage. Thermal decomposition in the event of fire or combustion may release dangerous products: if this should occur, specific means of protection must be used. In the event of fire, conventional fire extinguishing instruments are recommended (atomized water, foam, carbon dioxide, powder). Empty packages are not contaminated by the product and can therefore be recycled or reused. Utilization No special instructions. Other instructions The information given in this section is based on current ABB SACE know-how and is aimed at describing the product only for environmental, health and safety purposes. It must not, therefore, be considered as a guarantee of specific properties. ABB SACE assumes no responsibility for the behavior of buyers that do not comply with the information given in this table and for incorrect or improper usages of the product or usages that cannot reasonably be envisaged. ABB Technical catalogue | 1STC008001D0204 6/9 In-depth technical information ArTu distribution switchgear Mechanical and electrical characteristics Conformity with the CEI EN 60439-1/IEC 61439-1-2 Standard The ArTu switchboards have undergone the type tests foreseen by the CEI EN 60439-1 Standard and the new IEC 61439-1-2 Standard at the ABB type test laboratories. The results of these tests guarantee the performances of the ArTu switchboards and allow the end constructor of the switchboard using ABB SACE metal structures, air, moulded-case and modular circuit-breakers, not to carry out further type tests, respecting the selection criteria and the assembly instructions of the various components. These results, given below, can be referred to for drawing up the declaration of conformity of the electric switchboard. Overtemperature (Ref. par. 8.2.1. of the Standard) In the tables on page 5/5 and following, the thermal dissipation values are indicated, referring to all the dimensions of the ArTu switchboards and to the type of installation, deriving from the type tests carried out. The dissipated power data (in Watts) are according to the admissible overtemperature inside the switchboard in the upper part, and must be compared with the sum of the powers dissipated by all the components installed inside the switchboard (taking appropriately into account the factor of contemporaneity). 6 Dielectric properties (Ref. par. 8.2.2 of the Standard) Rated service voltage: Wall-mounted ArTu L D=200mm Floor-standing ArTu L D=250mm Wall-mounted ArTu M D=150/200mm ArTu M floor ArTu K D=250mm ArTu K up to 690V AC up to 690V AC up to 690V AC up to 690V AC up to 1000V AC Rated insulation voltage: up to 1000V AC up to 1000V AC up to 1000V AC up to 1000V AC up to 1000V AC Rated impulse withstand voltage: 6 kV 8 kV 6 kV 8 kV 8 kV Wall-mounted ArTu L D=200mm Floor-standing ArTu L D=250mm Wall-mounted ArTu M D=150/200mm ArTu M floor ArTu K D=250mm ArTu K phase-phase 25 kA (1s) 35 kA (1s) 25 kA (1s) 35 kA (1s) 105kA (1s) 50kA (3s) phase-neutral 9 kA (1s) 21 kA (1s) 9kA (1s) 21 kA (1s) 60 kA (1s) 52,5kA 73kA 52,5kA 73kA 254kA Floor-standing ArTu L D=250mm Wall-mounted ArTu M D=150/200mm ArTu M floor ArTu K D=250mm ArTu K Short-circuit withstand current (Ref. par. 8.2.3 of the Standard) Rated short-time short-circuit current: Rated max. peak short-circuit current Efficiency of the protection circuit (Ref. par. 8.2.4 of the Standard) Wall-mounted ArTu L D=200mm (Ref. par. 8.2.4.1): Following the assembly indications of the metal components, the effective electrical continuity between the exposed conductive parts is verified, with negligible resistance values. (Ref par. 8.2.4.2): Protection circuit short-circuit withstand current: phase-earthing busbar 9 kA (1s) 21 kA (1s) 9 kA (1s) 21 kA (1s) 60 kA (1s) Insulation distances (Ref. par. 8.2.5 of the Standard) The insulation distances are guaranteed by following the ABB SACE metalwork structure and circuit-breaker assembly and mounting instructions. Mechanical operation (Ref. par. 8.2.6 of the Standard) Mechanical operation is verified by following the assembly and mounting instructions for the ABB SACE metalwork structures and circuit-breakers. Degree of protection (Ref. par. 8.2.7 of the Standard) According to CEI EN 60529 (CEI 70-1 publication IEC 529) Without door Wall-mounted ArTu L D=200mm Floor-standing ArTu L D=250mm Wall-mounted ArTu M D=150/200mm ArTu M floor ArTu K D=250mm ArTu K IP31 IP31 - IP 31 IP31 With door/without door and ventilated side panels - - - - IP41 With door IP43 IP43 IP 65 IP 65 IP 65 6/10 1STC008001D0204 | ABB Technical catalogue Mechanical characteristics Material ArTu L structure 12/10mm thick pickled steel sheet ArTu M structure 15/10mm thick pickled steel sheet (floor-mounted) / 15/10mm hot galvanised sheet (wall-mounted) ArTu K structure 15/10mm thick steel sheet Panels 12/15/10mm thick steel sheet Doors 15/10mm hot galvanised steel sheet. 4mm thick glass tempered from inside Plates hot galvanised steel sheet, thickness: Plates 20/25/10mm Painting Structure colour Grey orange-peel RAL 7035 Base strip colour Grey orange-peel RAL 7012 Standard cycle Sheet washing Phosphating with iron salt base Drying in tunnel at 100°C 6 External and internal painting with electrostatic application of thermosetting powder enamel with epoxy polyester binders. Grey orange-peel RAL 7035 colour, total thickness: 60/70 micron. Polymerisation in oven at 180°C. Paint characteristics Binder: epossipoliestere Specific gravity: 1,61g/cm3 Theoretical coverage: 10,4 m2/Kg. con film di spessore medio 60 micron Melting point: 85-95 °C (Metodo banco Kofler) Granulometry: standard distribution between 5 and 100 micron with average size particles between 30 and 40 micron. Hardening: 12 min. at 190 °C (temperature of object) Hardness: 1H - 2H DIN 53152 bending elasticity: unaltered on 1/4” spindle DIN 53151 reticular adherence: GT O (100%) Erichem elasticity: SEN DIN 53156: > 6mm Gardner resistance to impact: 25 Kg. x cm. Tests carried out on degreased and phosphated sheets with film thickness of 60/70 micron. The painting has passed the resistance tests to saline fog (193 hours). Ambient characteristics Type of installation indoors Installation conditions Wall / Floor-mounted Service climate (t° / r.h. %) Ambient temperature limits constant 23°C/83% - 40°C/93% variable 23°C/98% - 40°C/98% operating -5°C +40°C storage -25°C +55°C ABB Technical catalogue | 1STC008001D0204 6/11 In-depth technical information ArTu distribution switchgear ABB SACE declaration of conformity ArTu switchgear with the following rated characteristics: Rated service voltage up to 690V / up to 1000V for ArTu K Rated insulation voltage up to 1000V Rated current / ICW ArTu L wall-mounted up to 250 A / 25 kA ArTu L floor-mounted up to 800 A / 35 kA ArTu K up to 4000 A / up to 105 kA ArTu M floor-mounted and K D=250mm up to 630 A / 35 kA ArTu M D=150/200mm up to 250 A / 25 kA Grado di protezione 6 ArTu L IP31 (without door), IP 43 (with door) ArTu K IP31 (without door), IP41 (with door and side ventilation), IP65 (with door) ArTu M D=250mm IP31 (without door), IP65 (with door) ArTu M D=150/200mm IP 65 (with door) When correctly selected and assembled, as per the indications given in this catalogue and in the instruction manual, allow construction of switchgear complying with the IEC 60439-1/IEC 61439-1-2Standard, on the basis of what is foreseen by the Low Voltage Directive of the European Community (Directive 73/23/EEC, Law 791/1977). The above is valid if the switchgear is designed and constructed: - selecting the materials according to the performances indicated in the ABB catalogues; - sizing the conductors according to the prescriptions of the IEC 60439-1 and CEI 64-8 Standards; - carrying out the individual tests foreseen under the IEC 60439-1 Standard successfully. Technical information Information regarding the methods for disposal and end of product life ABB SACE has carried out a study on the end of product life. Evaluation is made by means of applying the LCA (Life Cycle Assessment) method according to ISO 14040 - 1997 and in conformity with the requirements established by the SEMC in the document ISO TR 14025 TYPE III Environmental Declarations (MSR 1999:2 – “Guidelines for the Environmental Product Declaration”). The study was carried out taking into consideration the disposal and recycling processes of the main materials making up a typical switchboard. Starting from the basic list, the facility of dismantling and separating each piece, as well as recyclability of the materials was considered, and the product results as being almost completely recyclable. Again starting from the basic list reduced to the significant components, the end of life of each of these was evaluated. The flows of recyclable materials, materials to be recovered (or for incineration), given in the Table resulted. According to the hypotheses made, no material should end up directly in the dump. Substance Destination Aluminium waste Recycling Copper waste Recycling Polyurethane gaskets Incineration Glass fibres Recycling Glass waste Recycling Paper/cardboard Recycling Plastic Insulators Recycling Sheet metal waste Recycling 6/12 1STC008001D0204 | ABB Technical catalogue Dissipated power ArTu IP 31 switchgear Code Separate housing exposed on all sides Separate housing wall-mounted First or last housing exposed First or last housing wall-mounted Central housing exposed Central housing wall-mounted Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C ArTu L SL0600 99 125 150 176 95 118 143 168 91 113 137 160 SL0800 106 134 160 188 100 125 152 178 107 132 160 189 SL1000 122 152 184 216 116 143 174 204 113 141 170 201 SL1200 135 170 205 241 128 161 193 228 126 156 189 223 SL1400 174 217 265 312 155 195 237 278 168 211 255 301 145 183 221 261 164 206 250 295 140 176 213 252 SL1600 194 242 294 347 171 213 259 306 185 232 281 332 160 200 242 286 180 226 274 323 154 193 233 276 SL1800 211 264 320 378 184 231 281 331 200 251 305 360 173 217 262 309 195 244 296 350 166 208 252 298 SL2000 227 285 345 408 197 248 300 354 215 270 327 386 185 231 281 331 206 262 318 375 178 223 271 319 SL1408 246 309 374 442 206 257 311 369 237 297 360 425 197 246 299 352 229 287 348 410 190 239 288 341 SL1608 273 342 415 490 231 289 351 415 264 331 402 474 220 276 331 395 253 318 385 454 211 265 321 380 SL1808 286 359 435 513 245 308 373 441 278 349 422 498 235 295 358 422 268 337 408 482 229 287 348 411 SL2008 303 380 461 543 271 340 411 485 298 374 453 535 263 329 399 471 294 367 446 526 254 318 385 455 SM 1462 179 225 272 313 159 199 241 285 172 216 261 309 149 186 226 267 168 210 255 301 143 180 218 257 SM 1662 196 246 298 352 173 217 263 310 187 235 285 336 161 203 245 290 182 229 277 327 156 195 236 279 SM 1682 248 311 377 445 218 274 331 391 241 303 367 433 206 259 313 370 238 298 361 427 201 252 306 361 SM 1862 212 266 323 381 186 233 282 333 202 253 307 362 174 218 264 311 196 246 298 352 167 210 254 300 SM 1882 270 339 410 484 236 296 358 423 261 328 397 469 223 279 338 399 257 322 391 461 217 272 330 389 SM 2062 228 286 346 409 198 248 301 355 215 270 327 386 185 232 281 331 209 262 317 375 178 223 270 319 SM 2082 291 365 442 521 252 316 383 453 280 351 425 502 238 299 362 427 275 345 418 494 232 291 353 417 ArTu M ArTu K - H=1600mm SK 6025 206 257 310 367 185 229 275 325 198 247 298 351 172 215 257 305 192 242 290 342 167 207 248 283 SK 8025 260 322 391 460 230 286 345 406 252 315 380 448 216 273 325 385 250 310 373 442 212 265 320 376 ArTu K - H=1800mm SK 6025 222 278 338 396 196 245 295 348 212 255 320 377 184 230 276 325 206 258 310 368 178 222 267 315 SK 8025 280 350 423 500 247 310 370 438 271 340 410 485 233 290 350 415 270 335 405 476 228 285 342 404 SK 4040 223 280 338 400 208 258 314 371 208 262 315 374 187 234 281 332 193 246 296 350 170 215 260 310 SK 6040 285 357 433 511 259 324 393 464 268 336 407 481 237 297 359 424 255 320 387 457 223 279 338 400 SK 8040 356 446 540 638 319 400 484 572 339 425 515 608 296 371 449 530 327 410 496 586 283 355 430 508 SK 4050 257 322 389 460 242 301 366 433 237 298 359 425 216 270 324 383 217 276 332 393 194 245 297 353 SK 6050 328 412 499 589 302 378 458 541 306 383 464 549 273 342 414 489 286 359 434 513 254 319 386 456 SK 8050 390 489 592 699 367 461 558 659 374 469 568 671 339 425 514 607 365 458 554 654 321 403 488 577 SK 4060 290 364 440 520 276 344 418 494 265 333 402 476 244 305 367 434 240 305 367 435 218 274 333 395 SK 6060 371 466 564 666 344 432 523 617 343 430 521 616 309 387 469 553 316 397 481 568 285 358 434 512 SK 8060 423 531 643 759 415 521 631 745 408 512 621 733 381 478 579 684 402 505 611 722 359 451 546 645 Dissipated power inside the ArTu switchgear according to the admissible overtemperature. CONTINUED ABB Technical catalogue | 1STC008001D0204 6/13 6 In-depth technical information ArTu distribution switchgear Dissipated power ArTu IP 31 switchgear Code Separate housing exposed on all sides Separate housing wall-mounted First or last housing exposed First or last housing wall-mounted Central housing exposed Central housing wall-mounted Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C ArTu K - H=1800mm 6 SK 4080 371 461 560 668 349 440 535 622 329 410 495 588 300 377 457 539 297 370 455 536 273 343 415 491 SK 6080 428 537 651 769 426 535 648 765 407 511 619 731 388 486 589 695 384 481 583 688 352 442 535 632 SK 8080 489 614 743 877 478 599 726 857 463 581 703 830 450 564 683 807 454 570 690 815 434 544 659 778 SK 4010 445 553 672 802 419 528 642 746 395 492 594 706 360 452 548 647 356 444 546 643 328 412 498 589 SK 6010 514 644 781 923 511 642 778 918 488 613 743 877 466 583 707 834 461 577 700 826 422 530 642 758 SK 8010 587 737 892 1052 574 719 871 1028 556 697 844 996 540 677 820 968 545 684 828 978 521 653 791 934 SK1010 683 824 961 1098 670 812 968 1123 651 793 945 1102 632 776 927 1086 638 780 930 1089 612 757 913 1070 ArTu K - H=2000mm SK 6025 240 298 358 424 208 260 313 370 225 282 340 402 195 245 295 346 219 275 329 388 188 234 282 334 SK 8025 306 377 457 536 262 328 395 468 290 363 440 520 248 312 377 442 285 358 429 509 242 304 365 432 SK 4040 242 304 368 435 224 268 337 399 223 280 339 399 200 251 304 359 209 260 316 377 183 230 278 329 SK 6040 304 382 463 546 277 347 420 496 287 360 436 514 253 317 384 454 273 342 415 489 237 298 360 426 SK 8040 368 462 559 660 340 427 517 610 362 454 550 650 315 395 479 565 349 437 530 625 301 378 458 541 SK 4050 277 349 422 498 261 314 393 465 254 318 385 454 203 289 350 413 234 291 354 422 208 262 316 374 SK 6050 343 431 522 616 324 406 491 580 327 410 497 586 292 384 444 524 307 384 466 549 271 340 411 486 SK 8050 402 504 611 721 381 479 580 684 390 489 592 700 359 450 546 644 381 433 579 684 341 428 518 612 SK 4060 312 393 476 561 297 360 448 530 284 356 431 508 260 327 395 467 258 322 392 466 233 293 354 419 SK 6060 382 479 581 685 370 464 562 663 367 460 557 658 331 451 503 594 340 426 516 609 304 381 462 545 SK 8060 436 546 662 781 422 530 642 758 417 524 634 749 402 505 612 722 413 519 628 742 380 477 578 682 SK 4080 393 495 598 705 378 475 577 680 356 444 538 636 306 386 469 550 319 397 480 565 291 365 442 525 SK 6080 441 554 671 792 435 546 662 781 416 522 632 746 408 512 620 732 406 509 617 728 373 468 566 669 SK 4010 472 594 718 846 454 570 692 816 427 533 646 763 367 463 563 660 383 476 576 678 349 438 530 630 SK 6010 529 665 805 950 522 655 794 937 499 626 758 895 490 614 744 878 487 611 740 874 448 562 679 803 SK 8080 512 643 778 919 494 620 751 887 480 602 729 861 461 578 701 827 466 585 709 837 451 566 685 809 SK 8010 614 772 934 1103 593 744 901 1064 576 722 875 1033 553 694 841 992 559 702 851 1004 541 679 822 971 SK1010 721 864 1022 1198 700 858 1023 1184 681 833 987 1145 659 799 947 1100 670 814 967 1123 653 792 938 1092 Dissipated power inside the ArTu switchgear according to the admissible overtemperature. 6/14 1STC008001D0204 | ABB Technical catalogue Dissipated power ArTu IP 31 switchgear with ventilated side panels Separate housing exposed on all sides Separate housing wall-mounted Max. dissipated power (W) Code 25 °C 30 °C 35 °C First or last housing exposed Max. dissipated power (W) 40 °C 25 °C 30 °C 35 °C First or last housing wall-mounted Max. dissipated power (W) 40 °C 25 °C 30 °C 35 °C Max. dissipated power (W) 40 °C 25 °C 30 °C 35 °C 40 °C ArTu K - H=1800mm K 4060 442 570 707 852 421 544 675 813 325 420 521 628 312 402 499 601 SK 6060 515 664 824 993 486 627 778 938 396 511 634 764 368 475 589 710 SK 8060 590 761 944 1138 553 713 885 1067 461 594 737 889 426 550 682 823 SK 4080 599 773 959 1155 581 749 930 1120 409 528 654 789 393 508 630 759 6 SK 6080 685 885 1097 1323 660 852 1057 1274 496 640 793 956 461 595 738 889 SK 8080 772 996 1236 1489 725 936 1161 1399 551 711 882 1064 498 695 863 1040 SK 4010 799 1031 1279 1540 726 936 1163 1400 511 660 818 986 462 598 741 893 SK 6010 913 1180 1463 1764 825 1065 1321 1593 620 800 991 1195 542 700 868 1046 SK 8010 1029 1328 1648 1985 906 1170 1451 1749 689 889 1103 1330 586 818 1015 1224 SK1010 1196 1487 1778 2064 1057 1321 1612 1910 806 1011 1235 1471 685 937 1147 1373 ArTu K - H=2000mm SK 4060 446 574 710 855 426 550 682 822 328 425 525 632 314 406 504 605 SK 6060 529 683 847 1021 491 634 786 948 399 515 639 770 372 480 595 717 SK 8060 596 769 955 1151 565 728 904 1089 464 598 742 894 431 556 690 831 SK 4080 605 780 968 1167 584 754 935 1128 413 532 658 794 397 512 636 766 SK 6080 691 892 1107 1334 665 858 1065 1283 503 648 804 970 472 608 755 910 SK 8080 804 1037 1287 1551 738 953 1182 1425 575 742 920 1109 536 692 859 1035 SK 4010 807 1040 1291 1556 730 943 1169 1410 516 665 823 993 467 602 748 901 SK 6010 921 1189 1476 1779 831 1073 1331 1604 629 810 1005 1213 555 715 888 1071 SK 8010 1072 1383 1716 2068 923 1191 1478 1781 719 928 1150 1386 631 814 1011 1218 SK1010 1258 1548 1877 2246 1089 1373 1678 1982 850 1070 1297 1536 751 937 1138 1350 Dissipated power inside the ArTu switchgear according to the admissible overtemperature. ABB Technical catalogue | 1STC008001D0204 6/15 In-depth technical information ArTu distribution switchgear Dissipated power ArTu IP 31 switchgear with 2 ventilated side panels and 2 ventilated front panels H=200mm Separate housing exposed on all sides Separate housing wall-mounted Max. dissipated power (W) Code 25 °C 30 °C 35 °C First or last housing exposed Max. dissipated power (W) 40 °C 25 °C 30 °C 35 °C First or last housing wall-mounted Max. dissipated power (W) 40 °C 25 °C 30 °C 35 °C Max. dissipated power (W) 40 °C 25 °C 30 °C 35 °C 40 °C ArTu K - H=1800mm 6 SK 6060 571 737 914 1102 541 698 866 1044 428 552 685 826 406 524 650 784 SK 8060 649 837 1038 1252 611 788 978 1179 502 648 804 969 460 593 736 887 SK 6080 737 951 1180 1422 712 919 1140 1374 552 713 884 1066 518 668 829 999 SK 8080 836 1079 1339 1613 787 1016 1261 1519 625 806 1000 1205 595 768 953 1149 SK1010 1295 1606 1926 2235 1147 1444 1750 2074 914 1146 1401 1666 818 1035 1266 1516 ArTu K - H=2000mm SK 6060 586 756 938 1131 546 705 874 1131 434 560 695 838 407 525 651 785 SK 8060 654 844 1047 1261 623 804 997 1202 507 654 811 978 468 604 749 903 SK 6080 741 956 1186 1429 715 923 1145 1380 560 723 897 1081 527 680 843 1016 SK 8080 861 1112 1379 1662 792 1022 1268 1528 640 826 1024 1234 596 769 955 1151 SK1010 1333 1655 1983 2301 1154 1452 1759 2086 935 1176 1434 1706 820 1036 1263 1520 Dissipated power inside the ArTu switchgear according to the admissible overtemperature. 6/16 1STC008001D0204 | ABB Technical catalogue Dissipated power ArTu IP 41 switchgear with ventilated side panels Separate housing exposed on all sides Separate housing wall-mounted Max. dissipated power (W) Code 25 °C 30 °C 35 °C First or last housing exposed Max. dissipated power (W) 40 °C 25 °C 30 °C 35 °C First or last housing wall-mounted Max. dissipated power (W) 40 °C 25 °C 30 °C 35 °C Max. dissipated power (W) 40 °C 25 °C 30 °C 35 °C 40 °C ArTu K - H=1800mm SK 4060 418 539 669 806 398 514 637 768 317 409 507 611 304 392 486 586 SK 6060 489 631 783 944 462 596 739 891 376 485 602 725 350 451 560 674 SK 8060 560 723 897 1081 525 678 841 1013 438 565 700 844 405 523 648 781 SK 6080 651 840 1042 1256 627 809 1004 1210 471 608 754 909 438 565 701 845 SK 4080 562 725 899 1084 544 703 872 1051 395 509 632 761 382 493 612 738 SK 8080 733 946 1174 1415 689 889 1103 1329 524 676 838 1010 473 661 819 988 SK 4010 749 967 1199 1445 725 937 1163 1401 494 636 790 951 449 580 720 868 6 SK 6010 868 1120 1389 1675 836 1079 1339 1613 589 760 943 1136 515 665 825 994 SK 8010 977 1261 1565 1887 919 1185 1471 1772 655 845 1048 1263 556 778 964 1162 SK1010 1135 1408 1688 1962 1072 1338 1634 1935 766 960 1173 1397 650 891 1089 1303 ArTu K - H=2000mm SK 4060 422 543 671 809 403 519 644 777 320 413 511 615 309 398 492 591 SK 6060 503 649 805 970 466 602 747 900 379 489 607 732 353 456 565 681 SK 8060 566 731 907 1093 536 692 859 1035 440 568 705 850 410 528 656 790 SK 4080 567 732 908 1094 547 706 876 1056 398 514 635 765 389 498 617 743 SK 6080 657 847 1051 1267 632 815 1011 1219 477 616 764 921 448 578 717 864 SK 8080 764 985 1222 1474 701 905 1123 1353 546 705 874 1054 510 658 816 983 SK 4010 756 976 1211 1459 729 941 1168 1408 498 643 794 956 458 586 726 874 SK 6010 876 1129 1401 1689 843 1087 1348 1625 596 770 955 1151 527 680 844 1016 SK 8010 1019 1313 1629 1965 935 1207 1497 1804 683 881 1093 1318 600 774 960 1156 SK1010 1196 1497 1782 2134 1103 1391 1699 1998 807 1016 1232 1460 714 891 1080 1281 Dissipated power inside the ArTu switchgear according to the admissible overtemperature. ABB Technical catalogue | 1STC008001D0204 6/17 In-depth technical information ArTu distribution switchgear Dissipated power ArTu IP 43 switchgear Code Separate housing exposed on all sides Separate housing wall-mounted First or last housing exposed First or last housing wall-mounted Central housing exposed Central housing wall-mounted Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C ArTu L 6 SL0600 90 113 137 162 86 108 131 155 82 103 125 147 SL0800 97 122 147 174 92 115 140 165 98 122 148 175 SL1000 113 141 171 202 107 134 162 191 104 131 158 187 SL1200 126 159 192 227 120 151 181 214 117 146 177 209 SL1400 158 197 241 284 141 177 215 253 153 192 232 274 132 166 201 237 149 187 227 268 127 160 194 229 SL1600 176 220 267 315 155 194 235 278 168 211 255 302 145 182 220 260 164 205 249 294 140 175 212 251 SL1800 192 240 291 344 167 210 255 301 182 228 277 327 157 197 238 281 177 222 269 318 151 189 229 271 SL2000 206 259 314 371 179 225 273 322 195 245 297 351 168 210 253 301 190 238 289 341 162 203 246 290 SL1408 224 281 340 402 187 234 283 335 215 270 327 386 179 224 272 320 208 261 316 373 173 217 262 310 SL1608 248 311 377 445 210 263 319 377 240 301 365 431 200 251 301 359 230 289 350 413 192 241 292 345 SL1808 260 326 395 466 223 280 339 401 253 317 384 453 214 268 325 384 244 306 371 438 208 261 316 374 SL2008 275 345 419 494 246 309 374 441 271 340 412 486 239 299 363 428 267 334 405 478 231 289 350 414 Dissipated power inside the ArTu switchgear according to the admissible overtemperature. 6/18 1STC008001D0204 | ABB Technical catalogue Dissipated power ArTu IP 65 switchgear Code Separate housing exposed on all sides Separate housing wall-mounted First or last housing exposed First or last housing wall-mounted Central housing exposed Central housing wall-mounted Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C ArTu M SM 6061 70 88 107 126 SM 8061 71 90 108 128 SM 8062 83 104 126 149 SM 1062 95 119 145 171 SM 1262 6 107 134 162 192 SM 1462 159 200 242 278 141 177 215 254 153 192 233 275 132 166 201 237 149 187 227 268 127 160 194 229 SM 1662 175 219 265 313 154 193 234 276 167 209 253 299 144 180 218 258 162 204 247 291 138 174 210 248 SM 1682 221 277 336 396 194 244 295 348 215 269 326 385 184 230 279 329 212 265 321 380 179 224 272 321 SM 1862 189 237 287 339 165 207 251 297 180 225 273 322 154 194 235 277 175 219 265 313 149 186 226 267 SM 1882 240 301 365 431 210 263 319 376 232 291 353 417 198 249 301 355 229 287 348 410 193 242 294 347 SM 2062 203 254 308 364 176 221 268 316 192 240 291 344 164 206 250 295 186 233 282 334 158 199 241 284 SM 2082 259 324 393 464 224 282 341 403 249 312 379 447 212 266 322 380 245 307 372 440 207 259 314 371 ArTu K - H=1600mm SK 6025 182 228 276 326 161 202 245 289 175 219 266 314 151 189 229 271 170 214 259 306 145 182 221 261 SK 8025 232 291 353 416 203 255 309 365 225 282 342 404 192 241 292 345 222 278 337 398 189 237 287 338 ArTu K - H=1800mm SK 6025 199 250 303 357 175 220 266 315 190 239 289 342 164 206 249 294 185 233 282 333 158 198 240 283 SK 8025 251 315 382 451 221 277 335 396 244 307 371 439 209 262 317 375 241 302 366 432 204 256 310 365 SK 4040 193 242 293 346 179 224 271 320 178 223 270 319 160 201 243 287 165 207 251 296 146 184 222 263 SK 6040 254 318 385 455 230 289 350 413 238 299 362 428 210 264 320 378 227 285 345 407 198 249 301 356 SK 8040 316 397 481 568 284 356 431 509 302 378 458 541 263 330 400 472 291 365 442 521 252 316 383 452 SK 4050 223 284 344 406 213 267 323 381 206 258 313 370 188 236 286 338 188 236 286 338 170 213 258 305 SK 6050 292 366 443 524 268 336 407 481 271 341 413 488 242 304 368 435 279 319 386 456 226 284 343 406 SK 8050 346 435 526 622 326 409 496 586 332 417 505 596 301 378 458 540 324 407 493 581 286 358 434 413 SK 4060 260 326 395 466 247 310 375 443 235 294 357 421 217 272 329 389 212 266 322 381 194 243 295 348 SK 6060 331 415 502 593 306 384 465 549 305 383 464 548 275 344 417 493 282 353 428 505 254 319 386 456 SK 8060 377 473 572 676 369 463 561 663 363 456 552 652 339 426 516 609 358 449 544 642 320 401 486 574 SK 4080 328 411 498 588 317 398 482 569 290 364 440 520 274 344 417 492 259 325 394 465 243 304 369 435 SK 6080 381 478 579 684 379 476 577 681 362 455 551 650 345 433 524 619 341 428 519 612 314 393 477 563 SK 8080 435 546 661 781 425 533 646 763 412 517 626 739 400 502 608 718 404 507 614 725 386 484 586 692 SK 4010 386 484 586 692 373 468 567 669 341 428 518 612 322 405 491 579 305 382 464 547 286 358 434 512 SK 6010 448 562 681 805 446 560 679 801 426 535 648 765 406 509 616 728 401 504 611 720 369 462 561 662 SK 8010 512 642 778 919 500 627 760 898 485 608 736 869 471 591 715 845 475 596 722 853 454 569 689 814 SK1010 596 718 838 959 583 708 844 981 568 692 832 975 551 677 808 948 556 679 811 950 533 659 795 932 Dissipated power inside the ArTu switchgear according to the admissible overtemperature. CONTINUED ABB Technical catalogue | 1STC008001D0204 6/19 In-depth technical information ArTu distribution switchgear Dissipated power ArTu IP 43 switchgear Code Separate housing exposed on all sides Separate housing wall-mounted First or last housing exposed First or last housing wall-mounted Central housing exposed Central housing wall-mounted Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C ArTu K - H=2000mm 6 SK 6025 216 270 328 387 189 237 287 338 205 257 312 368 176 221 268 316 199 250 303 358 170 213 258 305 SK 8025 273 343 415 490 239 299 362 428 265 332 402 475 225 283 343 404 261 327 396 467 220 276 334 395 SK 4040 209 262 317 375 192 241 292 345 191 240 291 343 172 216 262 309 178 223 270 319 157 197 239 282 SK 6040 271 340 412 486 246 309 374 442 255 320 388 458 225 282 342 404 243 305 369 436 211 265 321 379 SK 8040 328 411 498 588 303 380 460 543 322 404 490 578 280 352 426 503 310 389 471 557 268 337 408 481 SK 4050 244 306 371 438 228 287 347 410 221 278 337 397 202 254 307 363 202 254 308 363 182 228 277 327 SK 6050 305 383 464 548 287 361 437 516 290 364 442 521 260 342 395 466 272 342 414 459 241 302 366 432 SK 8050 358 448 543 641 339 404 515 609 346 406 527 622 319 400 485 573 339 425 515 608 303 380 461 544 SK 4060 279 351 425 501 265 333 403 476 252 316 383 452 232 292 353 417 227 285 346 408 207 260 315 372 SK 6060 340 426 517 610 329 413 500 590 326 409 496 585 295 402 448 528 302 379 459 542 271 339 411 485 SK 8060 388 486 589 695 376 472 571 675 371 466 565 667 358 449 544 643 368 462 559 660 338 424 514 607 SK 4080 354 444 537 634 341 428 519 612 314 394 478 564 295 370 448 529 278 349 423 499 258 324 393 464 SK 6080 393 493 597 705 387 486 589 695 370 464 562 664 363 455 552 651 361 453 549 648 332 416 504 595 SK 8080 456 572 693 818 440 552 668 789 427 536 649 766 410 515 624 736 415 521 631 745 401 503 610 720 SK 4010 416 522 632 746 401 504 611 720 369 464 562 664 347 435 527 622 327 411 498 587 304 381 462 546 SK 6010 462 580 702 829 455 572 693 818 435 546 661 781 427 535 649 766 425 533 646 762 391 489 593 700 SK 8010 536 673 815 962 518 649 786 928 502 631 764 901 482 606 734 866 488 613 742 876 472 592 718 847 SK1010 629 753 892 1045 611 748 892 1092 593 728 862 998 574 697 826 960 585 710 843 980 569 690 819 952 Dissipated power inside the ArTu switchgear according to the admissible overtemperature. 6/20 1STC008001D0204 | ABB Technical catalogue Handling Handling ArTu K structures by means of rollers: only with ZR… reinforced plinth Handling with transpallet 100 A B C D A 6 A (mm) B (mm) C (mm) D (mm) 47 596 97 296 Width 600mm 125,5 469 251 Width 800mm 125,5 669 251 Width 400mm 125,5 259 251 Width 600mm 125,5 469 251 Width 800mm 125,5 669 251 Width 1000mm 125.5 869 251 Width 200mm (cable container) 125,5 251 69 Width 300mm (cable container) 125,5 251 169 Dimensions ArTu L Width 600mm For switchgear with reduced depth, the following type of handling is recommended: Fianco ArTu M ArTu K For greater safety during transport using a fork-lift truck, it is advisable to anchor the switchgear to the truck: 150/300mm In the case of structures W=1000mm (with internal or external cable container) containing busbar systems, check the centre of gravity before handling. ABB Technical catalogue | 1STC008001D0204 6/21 In-depth technical information ArTu distribution switchgear Handling Handling with overhead travelling crane To handle using a crane or overhead travelling crane, check the following conditions before lifting the switchgear: - excellent state of the ropes or chains; - the angle between the lifting ropes and the switchgear roof must be ≥ 45°; - the maximum number of columns transported is 3; - ArTu L maximum weight lifted as per DIN 580 (M8); - ArTu M - K maximum weight lifted as per DIN 580 (M12) Standard. To respect the conditions described above, a lifting beam with appropriate characteristics can be used when there are several columns side by side. Do not lift the Artu L structures by hooking the ropes to the connection box. 6 45° 45° DIN 580 Standard regarding mechanical connection elements (only for lifting eyebolts) Lifting eyebolts Lifting reinforcements B C D E F G Load 1 Load 2 Tightening A (mm) (mm) (mm) (mm) (mm) (mm) (kg) (kg) (Nm) ArTu L M8 30 8 18 6 15 20 140 95 8* ArTu M-K M12 54 12 28 10 22 30 340 240 8* Lifting eyebolts Lifting reinforcements ArTu L M8 Ø20 30 60 28 Ø10 40 210 140 22 ArTu M-K M12 Ø40 37 80 25 Ø14 60 510 350 40 * Close by hand without mechanical elements in order to avoid overvoltage in the stem that will reduce the capacity of the lifting eyebolts 6/22 1STC008001D0204 | ABB Technical catalogue Electrical continuity of the structure and of the fixed and mobile parts Electrical continuity in ArTu switchgear is guaranteed automatically just with assembly of the structure without the use of dedicated accessories. In the case of mobile parts (e.g. front panels), electrical continuity is guaranteed in the closed position by the special shape of the hinge (ABB patent) which is always supplied with the panels. 6 The blind door, side panels and rear panels are fitted with copper M6captive screws. Panel earthing is obtained thanks to the fixing screws. Standard 61439-1 Part 8.4.2.2.2 Prescriptions for earth continuity for protection against the consequences of a fault within the switchgear b) For covers, doors, closing plates and similar, the ordinary connections with metal screws and metal hinges are considered sufficient for electrical continuity so long as electrical devices that exceed the low voltage limits (ELV) are not installed on them. The special shape of the hinge allows connection even using a traditional copper braid. 90mm ABB Technical catalogue | 1STC008001D0204 6/23 In-depth technical information ArTu distribution switchgear Calculation of the PE protection conductor The IEC 60439-1 Standard indicates the methods of calculation for the cross-section of the PE protection conductor which must be suitably sized to withstand the thermal and dynamic components of the fault currents. In identifying the fixing position of the busbar, check the following conditions: - the busbar must be connected directly to the switchgear exposed conductive parts (structure); - the busbar must be connected in an easily accessible position. For sizing, use the values in the table, taken from the IEC 60439-1 Standard CEI EN60439-1, IEC 61439-1-2. S (mm2) Sp (mm2) S ≤ 16 S 16 < S ≤ 35 16 35 < S ≤ 400 S/2 400 < S ≤ 800 200 S ≤ 800 S/4 6 Wall-mounted ArTu L Wall-mounted ArTu M Protection conductor section (25x4) 100mm2 (art. BR0400) Certified ACAE/LOVAG No. IT 11.078 with protection conductor section (25x4)100 mm2 (art. BR0400) Floor-mounted ArTu M Certified ACAE-LOVAG IT 11.076 with protection conductor section (25x4) 100mm2 Floor-mounted ArTu L Protection conductor section (25x4) 100mm2 (art. BR0400) The conductors must be connected singly. The conductors must be connected singly. ArTu K Certified ACAE/LOVAG No. IT 11.079 with protection conductor section (50x5) 250mm2 (art. BR6305) 6/24 1STC008001D0204 | ABB Technical catalogue Equipotentiality The accessible conductive parts of a device, which cannot be connected to the protection circuit by their own means of connection, must be connected to the protection circuit of the apparatus for equipotentiality of the protection by means of an equipotential conductor, whose section must be selected according to the table given below. Minimum section of the equipotential protective conductor (mm2) Rated service current Ie (A) Ie ≤ 20 S 20 < Ie ≤ 25 2,5 25 < Ie ≤ 32 4 32 < Ie ≤ 63 63 < Ie 6 10 S = section of the phase conductor (mm2) PEN conductor 6 The section of the PEN conductors of the apparatus must be determined using the same procedure followed for the neutral conductor (N). The minimum section of a copper conductor must be 10mm2. The PEN conductor does not need to be insulated. The parts of the structure must not be used as a PEN conductor. However, the assembly tracks, made of copper or aluminium, can be used as PEN conductors. For conductors not made of copper, the sections above are replaced with equivalent conductivity sections, which may require larger sized terminals. ABB Technical catalogue | 1STC008001D0204 6/25 In-depth technical information ArTu distribution switchgear IP degrees of protection 1st NUMBER: protection against solid bodies 2nd NUMBER: protection against liquids 0 No protection 0 No protection 1 Protected against solid bodies larger than 50mm (accidental contact with hands) 1 Protected against vertical fall of drops of water (condensation) 2 Protected against solid bodies larger than 12 mm (fingers) 2 Protected against drops of water up to 15° from vertical 3 Protected against solid bodies larger than 2.5mm (tools, wires) 3 Protected against drops of water up to 60° from vertical 4 Protected against solid bodies larger than 1 mm 4 Protected against splashes of water from all directions 5 Protected against dust (no harmful deposit) 5 Protected against jets of water from all directions by means of a hose 6 Totally protected against dust 6 Protection against jets of water similar to sea waves 7 Protected against the effects of temporary immersion 8 Protected against the effects of continual immersion 6 1st number defined by the CEI EN 60529 – IEC 529 Standards 2nd number defined by the CEI EN 60529 – IEC 529 Standards 6/26 1STC008001D0204 | ABB Technical catalogue IP degree of protection Protection against penetration of solid bodies Protection against penetration of water 1st characteristic number Brief description Complete description 2nd characteristic Brief number description 0 Unprotected No particular protection 0 Unprotected No particular protection 1 Protected against No large surface of the human solid bodies lar- must be able to penetrate, ger than 50mm for example a hand (voluntary protection is not provided) or solid bodies larger than 50mm in diameter. 1 Protected against vertical fall of drops of water The drops of water which fall vertically must not cause harmful effects 2 Protected against drops of water up to 15° from vertical The drops of water which fall vertically must not cause harmful effects when the housing is leant at any angle up to 15° in relation to its normal position 3 Protected against rain The water which falls like rain from a direction with an angle of up to 60° to vertical must not cause harmful effects 2 3 4 5 6 Protected against Fingers or similar objects of length solid bodies lar- not exceeding 80mm or solid ger than 12mm bodies of diameter higher than 12 mm must not penetrate Complete description 6 Protected against Tools, wires, etc. with diameter or solid bodies lar- thickness greater than 2.5mm or ger than 2.5mm solid bodies with diameter greater than 2.5mm must not be not be able to penetrate 4 Protected against the Water splashed over the housing splashes of water from all directions must not cause harmful effects 5 Protected against Wires or plates thicker than solid bodies lar1.0mm or solid bodies with ger than 1.0mm diameter greater than 1.0mm must not be able to penetrate Protected against jets Water sprayed with a nozzle onto the housing from all direction must not cause harmful effects 6 Protected against waves 7 Protected against the Water in a harmful amount must effects of temporary not be able to penetrate inside immersion the housing immersed in certain pressure and duration conditions 8 Protected against the The material is suited to remaieffects of continual ning immersed in water in immersion Protected against Penetration of dust is not totally dust excluded, but the amount penetrating is not enough to harm correct operation of the material Totally protected against dust No penetration of dust is allowed In the case of waves or strong jets of water, the water must not enter the housing in a harmful amount Degrees of protection which can be obtained with ArTu switchgear ArTu L - IP31 ArTu L - IP41 ArTu M/K - IP31 ArTu K - IP41 Without door With door Without door Without door with IP41 kit and side ventilated panels ArTu K - IP41 With door and side ventilated panels ArTu K - IP65 With door and blind panels ABB Technical catalogue | 1STC008001D0204 6/27 In-depth technical information ArTu distribution switchgear IK mechanical resistance The IK degree is expressed in Joules in compliance with Standard IEC 62262. IK 0 IK 06 400mm Unprotected Impact energy in Joule 0,140 IK 07 IK 02 0,25 kg Impact energy in Joule 0,200 IK 08 0,25 kg Impact energy in Joule 0,350 IK 09 0,25 kg Impact energy in Joule 0,500 IK 10 400mm 0,25 kg 56mm IK 01 0,25 kg Impact energy in Joule 1,00 0,50 kg Impact energy in Joule 2,00 200mm IK 04 280mm IK 05 0,25 kg Impact energy in Joule 0,700 6/28 1STC008001D0204 | ABB Technical catalogue 300mm 200mm 140mm IK 03 1,7 kg 5 kg 5 kg 400mm 80mm 6 ArTu L Impact energy in Joule 5,00 ArTu M - K Impact energy in Joule 10,00 ArTu M - K Impact energy in Joule 20,00 Busbars with shaped section and flat bars Mechanical and electrical characteristics Compliance with CEI EN 60439-2/IEC 61439-1-2 Standard The ArTu switchgear has undergone the type tests foreseen by the CEI EN 60439-2/IEC 61439-1-2 Standards in the ABB laboratories. The results of these tests guarantee the performances of the ArTu switchgear and, by using the ABB SACE metalwork structures and accessories, such as the modular and moulded-case circuit-breakers, allow the end switchgear constructor not to carry out any further type tests by following the selection criteria and the assembly instructions for the various components, and only carrying out the individual tests foreseen under the CEI EN 60439/IEC 61439-1-2 Standard. These results, which are indicated below, can be referred to for making out the declaration of conformity of the switchgear. Technical characteristics Components Material Busbars electrolytic copper 99.9% CU-ETP Busbar holders self-extinguishing thermoplastic VO Tightening screws Mad. class 8.8 6 Busbar with shaped section Busbar Code Length IP 31 IP 41/43 IP 65 (mm) Icw IpK Dimensions Section (kA) (kA) (mm) (mm2) Weight (Kg) In 400 BA0400 1730 630 520 400 35 74 20x20 200 4 In 800 BA0800 1730 970 830 800 35 74 20x20 283 4.4 In 1250 BA1250 1730 1400 1330 1250 75 165 20x60 603 9.3 In 1600 BA1600 1730 1820 1710 1600 75 165 20x60 703 10 In 2000 BA2000 1730 2350 2200 2000 100 220 25x60 1000 14,8 IP 65 Icw IpK Dimensions Section (kA) (kA) (mm) 15x5 25x5 32x5 30x10 50x5 63x5 100x5 100x10 120x10 100x10 120x10 100x10 120x10 160x10 200x10 Tightening torque Screws M6 - 10N.m Screws M8 - 20N.m Screws M10 - 30N.m Flat busbar Busbar Code In 250 BR0250 In 400 BR0400 In 400 BR4005 In 630 BR0630 In 630 BR6305 In 800 BR8005 In 1250 BR1250 In 1600 BR1600 In 2000 BR2000 In 2500 BR1600 In 3000 BR2000 In 3200 BR1600 In 4000 BR2000 In 5000 BR2500 In 6300 BR2010 Tightening torque Length (mm) 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 IP 31 IP 41 280 275 530 480 610 575 772 695 850 780 951 863 1431 1347 1836 1710 2250 2110 3056 2700 3500 3200 4018 3600 4460 4250 5280 5000 6300 6000 Screws M6 - 10N.m Screws M8 - 20N.m Screws M10 - 30N.m 250 400 500 630 715 800 1250 1600 2000 2500 3000 3200 4080 NO NO 35 50 50 50 105 105 105 105 105 105 105 105 (mm2) Weight (Kg) 0,7 1,3 2,1 3,1 3,4 4,4 2,25 14,5 18,7 29 37,4 43,5 56,1 75 93,5 ABB Technical catalogue | 1STC008001D0204 6/29 In-depth technical information ArTu distribution switchgear Busbars with shaped section Busbar holders for busbars with shaped section up to 100 kA Busbar Type Scaled Icc (kA) Code 35 PB0802 400A 800A 1250A BA0400 BA0800 BA1250 L1-L2-L3 3x BA0400 3x BA0800 Neutral 100% 1x BA0400 1x BA0800 Neutral reduced Linear 35 PB0803 1x BA0400 L1-L2-L3 3x BA0400 3x BA0800 Neutral 100% 1x BA0400 1x BA0800 Neutral reduced 6 Scaled 75 1x BA0400 PB1600(1) L1-L2-L3 3x BA1250 Neutral 100% 1x BA1250 Neutral reduced Linear 65 PB1603(1) L1-L2-L3 3x BA1250 Neutral 100% 1x BA1250 Neutral reduced Linear 75 PB1601(1) L1-L2-L3 3x BA1250 Neutral 100% 1x BA1250 Neutral reduced Linear 100 PB3201 (1) L1-L2-L3 Neutral 100% Neutral reduced (1) It is possible to mount the 400/800A busbars with the special adapter AD1066 see example on page 5/88. Example of use of adapter for busbars Example of use of 2 busbars per phase (3200A) Example of use of the busbar with reduced neutral N L1 L2 AD1066 L3 PB3201 PB1601 In=3200A 2xBA2000 In=1250A BA1250 In=800A BA0800 In=1600A BA1600 6/30 1STC008001D0204 | ABB Technical catalogue Application ArTu L 1600A 3200A BA1600 BA2000 ArTu M Cable cont. Structure Drawer Structure ArTu K Cable Cable container Structure container 6 3x BA1600 1x BA1600 D≥700mm D≥700mm D≥500mm D≥300mm D≥500mm D≥500mm D≥700mm D≥700mm 1x BA1250 3x BA1600 1x BA1600 1x BA1250[ 3x BA1600 1x BA1600 1x BA1250 6x BA2000 2x BA2000 1x BA2000 ABB Technical catalogue | 1STC008001D0204 6/31 In-depth technical information ArTu distribution switchgear Busbars with shaped section Components AD1067 AD1063 AD1078 PB1601 PB1601 Branch between 3200A busbars with shaped section and 1250/1600A busbars with shaped section. Branch between 3200A flat busbars and 1250/1600A busbars with shaped section. 6 The busbar holders can be used both in intermediate and end positions, thanks to the special support. BF.... BA1600 BA2000 AD1069 AD1056 BF8002 BA1250 The connections can be made on each side of the busbar. 6/32 1STC008001D0204 | ABB Technical catalogue Joint for 1250-1600-2000A busbars. Example of “T” or “L” coupling. Direct branch by means of cable terminal for cable section up to 50mm2. BA1250 AD.... ED2209 TV.... AD1064 AD1071 AD1072 6 Snap-on assembly between busbar holders and assembly crosspieces. AD1077 Direct connection with Unifix H system. A self-locking hammer screw allows fixing between conductors in any position along the busbar, ensuring a large contact surface. Note branches headed with cable terminal with the following dimensions: Cable section mm2 A B C D 16 9 13 6 32 25 10,5 13 7 35 C 35 14 17 9 41 70 15 20 10 42 A D M8 9 8 B Branch by means of accessory. ABB Technical catalogue | 1STC008001D0204 6/33 In-depth technical information ArTu distribution switchgear Flat busbars Busbar holders for flat busbars up to 32 kA Busbars Type Scaled Icc (kA) Code 23 BP0634 L1-L2-L3 Neutral 100% Linear 32 BP0630 L1-L2-L3 Neutral 100% Application Cable cont. 250A 400A 630A BR0250 BR0400 BR0630 3xBR0250 3xBR0400 3xBR0630 1xBR0250 1xBR0400 1xBR0630 Structure Box 3xBR0250 3xBR0400 3xBR0630 1xBR0250 1xBR0400 1xBR0630 6 Busbar holders for flat busbars up to 105 kA Busbars Type Linear 630A 800A 1250A 1600A ArTu K Icc (kA) Code BR4005 BR6305 BR8005 BR1250 BR1600 structure/cable cont. 50 3xBR4005 3xBR6305 3xBR8005 3xBR1250 BP1250 L1-L2-L3 Neutral 100% Linear 75 BP1600 L1-L2-L3 Neutral 100% Linear 105 BP2500 L1-L2-L3 Neutral 100% Linear 105 BP3200 L1-L2-L3 Neutral 100% Linear 105 BP3200 L1-L2-L3 Neutral 100% Linear Application 400A 105 BP1621 L1-L2-L3 Neutral 1xBR4005 1xBR6305 1xBR8005 1xBR1250 D≥500 3xBR1600 1xBR1600 6xBR1600 2xBR1600 105 BP1622 L1-L2-L3 Neutral 100% 6/34 1STC008001D0204 | ABB Technical catalogue D≥700 9xBR1600 3xBR1600 D≥700 9xBR2000 3xBR2000 D≥900 9xBR2500 3xBR2500 100% Linear D≥500 D≥900 9xBR2010 3xBR2010 D≥900 Flat busbars Components AD1063 BS.... BR .... BP1601 TR.... The 25mm pitch drilling allows branching between flat busbars at any point.. Branch between pre-drilled 3200A flat busbars and 1250/1600A busbars with shaped section (only with PB1601). BR... N 6 Branch between flat busbar and flexible busbar by means of tightening plate. N 16x5 max N L1 L2 N L3 BP... AD1081 AD1081 Busbar holder for flat busbars (one busbar per phase). Single-phase divider with possibility of connection, which can be mounted on DIN rail. Single-phase dividers up to 400A, which can be mounted on DIN rail. AD1034 AD1063 Four-pole 250A divider. ABB Technical catalogue | 1STC008001D0204 6/35 In-depth technical information ArTu distribution switchgear Examples of connections - Unifix H Unifix H frame with 400A 24 and 36 module busbars Busbar power supply from the top by means of 4P feeder module placed laterally Busbar power supply from the top by means of main row circuitbreaker ED2531 In = 320A max ED2209 ED2549 ED2556 ED2531 ED2564 ED2549 ED2191 ED2191 ED2556 N N ED2564 ED2845 L1 L1 T T L2 L2 N L3 N N L3 N L1 L1 T T T L2 L2 N L3 N N L3 N N L1 L1 T L2 6 L2 N L3 Busbar power supply from the bottom by means of 4P feeder module placed laterally ED2531 ED2549 ED2556 ED2564 ED2191 L3 Busbar power supply from the bottom by means of main row circuit-breaker ED2531 ED2531 In = 400A max ED2549 ED2549 ED2191 ED2556 ED2556 ED2564 ED2564 ED2845 N N N L1 L1 N on L1 T T TEST L2 N L3 L1 N L2 L2 L3 L3 Busbar power supply from the top by means of 4P feeder module placed centrally T T T TEST L2 N N N Covers for IP 20 degree of protection ED2531 In = 400A max L3 ED2407 ED2549 ED2191 ED2556 ED2564 N N L1 L1 T L2 N N L3 L2 N L3 on L1 L1 TEST T T T TEST L2 L3 L2 N N N 6/36 1STC008001D0204 | ABB Technical catalogue L3 ED2407 Examples of connections - Unifix L Unifix L frame with 100A 12/18/24 module busbars Two different single-phase circuits on a single 24 module DIN rail ED3082 ED2993 ED3104 ED3103 ED3102 ED3101 ED2993 T T N N Busbar power supply by means of power supply terminals placed centrally In 100 A max T N 6 Example of main and shunted power supply Busbar power supply by means of power supply terminals placed laterally ED2969 T N ED3082 T T N N ED3132 In = 80 A max ED2944 (L=350mm) ED2993 ED3104 ED3103 ED3102 ED3101 T T T T N N N N Busbar power supply by means of cable terminal placed under the head of the circuit-breaker terminal and branch with parallel module In = 100 A max ED3405 (L=400mm) Direct busbar power supply by means of feeder module (supplied without cables) and branch by means of feeder module ED3101 ED2969 ED3102 ED3103 ED3104 T T T N N T T N N N ED3132 (L=350mm) T T ED2969 T T T N N N N N ABB Technical catalogue | 1STC008001D0204 6/37 In-depth technical information ArTu distribution switchgear Examples of ArTu segregation 6 Form 1 Form 2 Form 3 Form 4 (no internal segregation) (segregation of the busbars from the functional units) Form 2a (separation of the busbars from the functional units + separation of the functional units from each other) Terminals not separated from the busbar Form 3a (separation of the busbars from the functional units + separation of the functional units from each other + separation of the terminals from each other) Form 2b Terminals not separated from the busbar Form 4a Terminals separated from the busbar Form 3b Terminals in the same the associated functional unit Terminals separated from the busbar Form 4b Terminas not in the same the associated functional unit 6/38 1STC008001D0204 | ABB Technical catalogue Standardised RAL colours (on request) On request, colours other than the standard RAL 7035 orange peel one are available, using the same painting cycle (for other types of colours or paints, please contact ABB). Beige RAL 1013 Smooth Orange p. RAL 1015 Smooth Orange p. Smooth Orange p. RAL 2004 Smooth Orange p. White RAL 9010 Smooth Orange p. RAL 9001 Smooth Orange p. Green RAL 1014 RAL 6027 Smooth Orange p. Orange RAL 2002 Ivory RAL 9002 Smooth Orange p. Red Blue RAL 3000 RAL 5012 Smooth Orange p. Smooth Orange p. RAL 5015 Smooth Orange p. Black Grey RAL 9005 RAL 7032 Smooth Orange p. RAL 6019 Smooth Orange p. Smooth Orange p. RAL 7001 Smooth Orange p. Smooth Orange p. RAL 7031 Smooth Orange p. RAL 6021 Smooth Orange p. RAL 5010 Smooth Orange p. RAL 7030 Smooth Orange p. RAL 7035 Smooth Orange p. RAL 6011 Smooth Orange p. RAL 5009 Smooth Orange p. RAL 7012 Smooth Orange p. ABB Technical catalogue | 1STC008001D0204 6/39 6 Overall dimensions Gemini 7/2 ArTu L Structures 7/6 ArTu M 7/10 ArTu K 7/14 ArTu L - M - K - Kit for apparatus 7/20 ArTu L - M - K - Distribution systems 7/23 ArTu L - M - K - Accessories 8/26 ABB Technical catalogue | 1STC008001D0204 7/1 Overall dimensions Gemini Structures Front view Side view A C = Installation with brackets 30 30 30 D B F C = = B D G H = = = Top view G H A E = Size Code A B C D E F G H I L 1 1SL0201A00-1SL0211A00-1SL0221A00 335 400 250 300 150 180 263 463 195 395 2 1SL0202A00-1SL0212A00-1SL0222A00 460 550 375 450 250 270 412 612 320 520 3 1SL0203A00-1SL0213A00-1SL0223A00 460 700 375 600 270 475 560 760 320 520 4 1SL0204A00-1SL0214A00-1SL0224A00 590 700 500 600 286 385 562 762 445 645 5 1SL0205A00-1SL0215A00-1SL0225A00 590 855 500 750 390 558 713 913 445 645 6 1SL0206A00-1SL0216A00-1SL0226A00 840 1005 750 900 640 706 863 1063 695 895 Uprights Duct b A Duct h 28 Front opaque and transparent doors B 7 I L = A B Size Code A B Duct b h Size Code A B 1 1SL0283A00 132 300 18 46 1 1SL0241A00-1SL0231A00 349 325 2 1SL0284A00 152 450 27 46 2 1SL0242A00-1SL0232A00 499 450 3 1SL0285A00 152 600 27 46 3 1SL0243A00-1SL0233A00 649 450 4 1SL0285A00 152 600 27 46 4 1SL0244A00-1SL0234A00 649 575 5 1SL0286A00 152 750 36 46 5 1SL0245A00-1SL0235A00 799 575 6 1SL0287A00 152 900 55 46 6 1SL0246A00-1SL0236A00 949 825 > The measurements are in millimetres 7/2 1STC008001D0204 | ABB Technical catalogue Base plates Inner doors 2 metal plates 5 insulating plates A 38 A Inner door Panel Base plate Inner door B B C 63 D C D Size Code A B C D Size Code A B C D 1 2 3 4 5 6 1SL0259A00-1SL0275A00-1SL0267A00 1SL0260A00-1SL0276A00-1SL0268A00 1SL0261A00-1SL0277A00-1SL0269A00 1SL0262A00-1SL0278A00-1SL0270A00 1SL0263A00-1SL0279A00-1SL0271A00 1SL0264A00-1SL0280A00-1SL0272A00 235 360 360 485 485 735 285 435 585 585 735 885 33.5÷110 33.5÷139 33.5÷139 33.5÷139 33.5÷228 16.3÷91 36.4÷140 36.4÷140 36.4÷140 47÷244 33.5÷228 47÷244 1 2 3 4 5 6 1SL0251A00 1SL0252A00 1SL0253A00 1SL0254A00 1SL0255A00 1SL0256A00 250 375 375 500 500 750 300 450 600 600 750 900 3 4 4 4 5 5 128 177 177 177 277 277 d= pos. 5 101 101 101 101 101 d= pos. 6 113,5 113,5 113,5 113,5 113,5 7 DIN rail 35 22,5 Size Code 1 2 3 4 5 6 1SL0290A00 1SL0291A00 1SL0291A00 1SL0292A00 1SL0292A00 1SL0293A00 A A 210 318 318 443 443 663 d= pos. 1 51 51 51 51 51 51 d= pos. 2 63,5 63,5 63,5 63,5 63,5 63,5 d= pos. 3 76 76 76 76 76 76 d= pos. 4 88,5 88,5 88,5 88,5 88,5 88,5 d The distances of the DIN rail from the panel depend on the depth at which the DIN rail is regulated by using fixing devices. Panels for modular apparatus mounted on DIN rail C B B 1 module C 1 + 1/2 module Size Code 1 2 3 4 5 6 1SL0307A00 1SL0308A00-1SL0313A00 1SL0308A00-1SL0313A00 1SL0309A00-1SL0314A00 1SL0309A00-1SL0314A00 1SL0310A00-1SL0315A00 f 19 A A p 19 1 mod. A 250 375 375 500 500 750 B 150 150 150 150 150 150 1+1/2 mod. A B 375 225 375 225 500 225 500 225 750 225 C 46 46 46 46 46 46 DIN modules 12 18 18 24 24 36 p 44 44 44 44 44 44 f 145 197 197 197 297 297 > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/3 Overall dimensions Gemini B Blank panels p f 19 A Size Code 1/2 mod. A B 1 mod. A 2 mod. A 1 1SL0318A00-1SL0324A00-1SL0330A00 250 75 250 B p f 150 250 300 26,5 162 2 1SL0319A00-1SL0325A00-1SL0331A00 375 75 3 1SL0319A00-1SL0325A00-1SL0331A00 375 75 375 150 375 300 26,5 214 375 150 375 300 26,5 4 1SL0320A00-1SL0326A00-1SL0332A00 500 214 75 500 150 500 300 26,5 5 1SL0320A00-1SL0326A00-1SL0232A00 214 500 75 500 150 500 300 26,5 6 1SL0321A00-1SL0327A00-1SL0233A00 314 750 75 750 150 750 300 26,5 314 Modular plates B Mounting distances between front panel and plate DIN panel Blank panel 2,2 12,5 B 12,5 7 2 A Size Code 1 2 3 4 5 6 1SL0296A00 1SL0297A00-1SL0302A00 1SL0297A00-1SL0302A00 1SL0298A00-1SL0303A00 1SL0298A00-1SL0303A00 1SL0299A00-1SL0304A00 1 mod. A 210 318 318 443 443 663 B 130 130 130 130 130 130 73,7 2 mod. A B 318 318 443 443 663 280 280 280 280 280 19 73,7 54,7 71,5 67,2 84 79,7 96,5 92,2 109 104,7 117,2 121,5 134 Kit for Tmax Panel B 150 300 46 19 A D Plate C Size Code 2 3 4 5 6 1SL0336A00-1SL0370A00 1SL0336A00-1SL0370A00 1SL0337A00-1SL0371A00 1SL0337A00-1SL0371A00 1SL0338A00-1SL0372A00 Panel 1 mod. A 375 375 500 500 750 B 150 150 150 150 150 > The measurements are in millimetres 7/4 1STC008001D0204 | ABB Technical catalogue 2 mod. A 375 375 500 500 750 B 300 300 300 300 300 Size Code 1 2 3 4 5 6 1SL0296A00 1SL0297A00-1SL0302A00 1SL0297A00-1SL0302A00 1SL0298A00-1SL0303A00 1SL0298A00-1SL0303A00 1SL0299A00-1SL0304A00 Plate 1 mod. C 210 318 318 443 443 663 D 130 130 130 130 130 130 2 mod. C D 318 318 443 443 663 280 280 280 280 280 Wiring kit 60 Duct 25x60 mm 14 31 25 A 14 46 60 Duct 40x60 mm 40 A Ventilation kit Anti-condensation kit Size A 1 2 3 4 5 6 210 318 318 443 443 663 Pedestal 50 130 7 Ø25 23 130 104,5 800 11 Ø 4,5x4 5 55 104,5 305 165 Pole installation kit 60 B A 30 25 Size 1 2-3 4-5 6 A 232 358 483 733 B 206 332 457 707 > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/5 Overall dimensions ArTu L structures Wall-mounted ArTu L Front structure Front of cable container Side 390 310 260 690 560 484 204 Code A B SL0600 600 650 SL0800 800 850 SL1000 1000 1050 SL1200 1200 1250 VC0600 600 650 VC0800 800 850 VC1000 1000 1050 VC1200 1200 1250 Structure A B A B Cable container 7 Base of structure Base of cable container 540 160 84.5 75.5 > The measurements are in millimetres 7/6 1STC008001D0204 | ABB Technical catalogue 84.5 90 Wall-mounted ArTu L Fixing to wall 367,5 667,5 C 35 35 Code C D SL0600 645 700 SL0800 645 900 SL1000 645 1100 SL1200 645 1300 VC0600 345 700 VC0800 345 900 VC1000 345 1100 VC1400 345 1300 Structure D D Cable container 7 90 Useful space inside wall-mounted switchgear Structure Cable container 76 52 Tmax T-XT 84 Pro M 154 119 BP0630 144 PB0803 29 51 BP0634 74 PB0802 > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/7 Overall dimensions ArTu L structures Floor mounted ArTu L Front of structure Front of structure with internal cable container 890 563 247 484 147 690/890 560/760 484/684 Side Front of external cable container 390 310 260 240 112 VC1425 VC1625 VC1825 VC2025 A LF.... 36 Modules B A B A B 24 Modules 7 MC.... 100 Base of structure 540/740 100 Base of cable container 160 Structure 84.5 75.5 100 Code A SL1400 - SL1408 1400 1450 SL1600 - SL1608 1600 1650 SL1800 - SL1808 SL2000 - SL2008 Code A B VC1400 1400 1450 VC1600 1600 1650 1800 1850 VC1800 1800 1850 2000 2050 VC2000 2000 2050 Cable connection box 103.5 90 Blind base plates Front view Side view 235.4 192.8 C D 15.5 516 = = 310 15.5 Code E C D 216 10 E Connection box for structure 132.5 RC1000 690 644 550 Connection box for cable container RC2000 > The measurements are in millimetres 7/8 1STC008001D0204 | ABB Technical catalogue 390 344 250 310 10 341 338.5 384.5 Top view External cable container B 341 Floor-mounted ArTu L Fixing to wall/floor 667.5/867.5 F Glazed door 24 mod. DIN + int.cable container 367.5 384.5 Blind door 24 mod.DIN 384.5 887 G G 694 452 35 35 I I 7 90 H 42.5 514 22 22 152 30.5 Structures Code SL1400 SL1600 SL1800 SL2000 SL1408 SL1608 SL1808 SL2008 External cable container F 645 645 645 645 845 845 845 845 G 1575 1775 1975 2175 1575 1775 1975 2175 H 645 645 645 645 845 845 845 845 I Code F G H VC1400 VC1600 VC1800 VC2000 345 345 345 345 1575 1775 1975 2175 345 345 345 345 1444 1644 1844 2044 Useful space inside floor-mounted switchgear Structure Cable container Connection box 185 BP0630 162 PB0803 129 BP0634 106 PB0802 86 Tmax T -XT Tmax T-XT 118 Pro M 108 154 BP0630 180 PB0803 189 62 BP0634 80 PB0802 129 BP0630 149 PB0803 29 > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/9 Overall dimensions ArTu M structures Wall-mounted ArTu M Structure Blind or transparent front door Side 150 200 Front 700 694 600 35 35 E A B 90 25 Top C 7 150 200 A B C D E SM6061 700 600 183 60 640 SM8061 900 800 183 60 840 SM8062 900 800 320 70 840 SM1062 1100 1000 320 70 1040 SM1262 1300 1200 320 70 1240 Depth 150mm D 556 Depth 200mm Switchgear for operating theatre SM 1069 Front Side 200 700 600 PO 6069 629 751 Top 69 130 200 130 556 > The measurements are in millimetres 7/10 1STC008001D0204 | ABB Technical catalogue 1151 1029 1123 1100 1000 PV 4060 Wall-mounted ArTu M Fixing to wall 734 660 F G SM6061 734 661 SM8061 934 861 SM8062 934 861 SM1062 1134 1061 SM1262 1334 1261 Depth 150mm Depth 200mm F G Embedded installation Front Totally embedded 150 822 710 7 Semi-embedded 150 136 80 70 185 200 80 120 200 792-992-1192-1392 700-900-1100-1300 822-1022-1222-1422 46 46 Useful space inside wall-mounted switchgear Depth 150m Depth 200mm 99 System Pro M 67 Tmax T-XT 49 System Pro M 17 Tmax T1-T2-XT1-XT3 121 23 171 23 > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/11 Overall dimensions ArTu M structures Floor-mounted ArTu M Front Blind or transparent front doors Side 696 896 600 250 800 35 157 694 894 894 35 55 123 36 Modules 24 Modules A B 241,5 A B D E D 7 55 100 100 90 Top/Base 57 70 320 Side panel 70 180 90 90 22 514 22 250 180 320 Additional cable container Externasl door (front/rear) 394 396 219 300 A B C D E Structures without cable container SM1462 1496 1400 1490 1436 SM1662 1696 1600 1690 1636 SM1862 1896 1800 1890 1836 SM2062 2096 2000 2090 2036 Structures with cable container C A B 1636 1836 2036 SM1682 1696 1600 1690 1636 157 SM1882 1896 1800 1890 1836 157 SM2082 2096 2000 2090 2036 157 Additional cable container VC1632 1696 1600 VC1832 1896 1800 VC2032 2096 2000 Overall dimensions for several structures side by side W x N + 28 = Xmm 100 14 > The measurements are in millimetres 7/12 1STC008001D0204 | ABB Technical catalogue 18 W = Column width N = Number of columns 28 = Overall dimensions 2 side panel Floor-mounted ArTu M Fixing to wall/floor 606 806 7 Ø13mm 522 722 162,5 Useful space inside floor-mounted switchgear F G H I 72 129,5 120 max 81 Tmax T1-T2 78 108 Tmax XT1-XT3 74 112 Tmax XT2-XT4 86 124 System Pro M Structure Cable container G I 150 BP0630 165 PB0803 128 BP0630 F H 95 PB0802 40 > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/13 Overall dimensions ArTu K structures ArTu K Structure without cable container Front Structure with cable container Side D ≤300mm 510/637*/720/837* 920/1037*/1120 Side D ≥500mm 920/1020/1120 C2 C2 800/1000 C1 C1 390/600/800/1000 Closed frame for segregated switchgear 305 505 705 A B 157 347/557/757/957 557/757 Reduced frame Open frame 7 36/48 Modules 24/36 Mod. 75 150 226 74 100 A B Structure height 1600mm SK6025/SK8025 C1 C2 B 1731 1600 150 270 SK6025/SK8025 1931 1800 150 270 SK4040/SK6040/SK8040 1931 1800 225 345 SK4050/SK6050/SK8050 1931 1800 300 420 SK4060/SK6060/SK8060/SK6600* 1931 1800 500 620 SK4080/SK6080/SK8080/SK8800* 1931 1800 700 820 SK4010/SK6010/SK8010 SK1010 Structure height 2000mm 1931 1931 1800 1800 900 1020 1020 SK6025/SK8025 2131 2000 150 270 SK4040/SK6040/SK8040 2131 2000 225 345 SK4050/SK6050/SK8050 2131 2000 300 420 SK4060/SK6060/SK8060/SK6600* 2131 2000 500 620 SK4080/SK6080/SK8080/SK8800* 2131 2000 700 820 SK4010/SK6010/SK8010 SK1010 2131 2131 2000 2000 900 1020 1020 Structure height 1800mm * Angled structures > The measurements are in millimetres 7/14 1STC008001D0204 | ABB Technical catalogue Overall dimensions for several structures side by side W x N + 28 = Xmm W = Column width N = Number of columns 28 = Overall dimensions 2 side panels 275 475 675 223 ArTu K Bases SK6025 (W600xD150) SK8025 (W800xD150) VC3025 (W300xD150) = SK4040 (W390xD225) SK6040 (W600xD225) VC3040 (W300xD225) = = F D SK8040 (W800xD225) = 90 115 = 86,5 E E F 115 90 = = 76,5 160 = D 76,5 SK8060 (W800xD500) VC3060 (W300xD500) VC3080 (W300xD700) = 75,5 128,5 137 58 137 128,5 75,5 = 104 340 = D = SK4060 (W390xD500) SK4080 (W390xD700) = D = = E E 142 SK6060 (W600xD500) SK6080 (W600xD700) SK8080 (W800xD700) 200 70 200 E = = 75,5 128,5 137 58 137 128,5 75,5 = 102,5 102,5 7 137 200 F 340 F 200 F 120 540 137 = 176 190 = 400 260 155,5 SK4010 (W390xD900) SK6010 (W600xD900) SK8010 (W800xD900) VC3010 (w300xD900) = = D 126,5 SK1010 (W1000xD900) 169,5 1117 169,5 D E F SK6025 (W600xD150) 320 140 70 SK8025 (W800xD150) 320 140 70 SK4040 (W390xD255) 200 108 137 SK4050 (W390xD300) 320 94,5 235 SK4060 (W390xD500) SK4080 (W390xD700) 320 320 99 99 420 620 374 SK4010 (W390xD900) SK6040 (W600xD225) 270 540 125 123,5 780 70 112 SK6050 (W600xD300) SK6060 (W600xD500) 530 94,5 93 235 163 112 374 778 66 115,5 123 333 SK6010 (W600xD900) 467 125 780 SK8050 (W800xD900) 730 94,5 235 SK8010 (W800xD300) 467 125 780 VC3025 (W300xD150) VC3040 (W300xD225) 180 200 140 103 57 137 VC3050 (W300xD300) 230 99 235 VC3060 (W300xD500) 230 99 420 VC3080 (W300xD700) VC3010 (W390xD900) 230 200 99 620 SK6080 (W600xD700) 50 > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/15 Overall dimensions ArTu K structures ArTu K Transparent front doors Side door 507/717 917/1117 35 Side door 318/393 593/793 507/717/917/1117 917/1117 35 55 1671 1871 2071 1671 1871 2071 1671 1871 2071 1671 1871 2071 55 7 90 90 90 18 18 82 82 537/737 Blind side or ventilated panels 593/793/993 318/593 793/993 18 18 Rear panels ventilated 417 507/717/917/1117 blind 150 300 500 1671 1871 2071 1671 1871 2071 Ventilation area air inlet side (valid for a single panel) D (mm) cm 2 500 700 900 75 113 170 18 > The measurements are in millimetres 7/16 1STC008001D0204 | ABB Technical catalogue 18 cable container ArTu K Fixing to wall/floor Structure C Ø13mm Dimensions Code A A1 B B1 C L600xP150 SK6025 546 720 189 287 620 L800xP150 SK8025 746 920 189 287 820 L390xP225 SK4040 336 510 264 362 410 L390xP300 SK4050 336 510 339 437 410 L390xP500 SK4060 336 510 539 637 410 L390xP700 SK4080 336 510 739 837 410 L390xP900 SK4010 336 510 939 1037 410 L600xP225 SK6040 546 720 264 362 620 L600xP300 SK6050 546 720 339 437 620 L600xP500 SK6060 546 720 539 637 620 L600xP700 SK6080 546 720 739 837 620 L600xP900 SK6010 546 720 939 1037 620 L800xP225 SK8040 746 920 264 362 820 L800xP300 SK8050 746 920 339 437 820 L800xP500 SK8060 746 920 539 637 820 L800xP700 SK8080 746 920 739 837 820 L800xP900 L1000xP900 SK8010 SK1010 746 946 920 1120 939 939 1037 1037 820 1020 Additional cable container B 1 A B Side F G W (mm) 420 A 320 D (mm) 287 B 170 ZR4000 510 410 362 245 ZR6000 720 620 437 320 ZR8000 920 820 637 520 837 720 1037 920 A1 External door (front/rear) Additional cable container Front 7 Code ZR3000 H L Additional cable container Dimensions Code D E F G H I L VC3025 1731 1600 420 300 150 1671 417 VC3025 VC3040 420 300 150 1871 417 L300xP300 VC3050 1931 1931 1931 1800 L300xP225 1800 1800 300 300 L300xP500 L300xP700 L300xP900 VC3060 VC3080 1931 1931 VC3010 1931 1800 1800 1800 420 420 420 420 420 225 300 500 700 900 1871 1871 1871 1871 1871 417 417 417 417 417 2131 2131 2000 2000 420 420 VC3060 VC3080 VC3010 2131 2131 2131 2131 2000 2000 2000 2000 420 420 420 150 225 300 L300xP500 L300xP700 L300xP900 300 300 300 300 1871 1871 1871 1871 417 417 L300xP300 VC3025 VC3040 VC3050 H=1600mm L300xP150 H=1800mm L300xP150 D E I 300 300 300 H=2000mm L300xP150 L300xP225 420 300 300 500 700 900 1871 1871 417 417 417 417 100 18 > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/17 Overall dimensions ArTu K structures ArTu K Useful space inside the switchgear Depth 150mm B Depth 225/300mm D USEFUL SPACE FOR BARS USEFUL SPACE FOR BARS A C 50 50 7 FIXED A B PLUG-IN A B WITHDR. A B T1-T2-T3 78 146 - - - - Depth 225mm T4-T5-T6 107 117 - - - - XT1-XT3 74 150 - - - - XT2-XT4 86 138 - - - - FIXED C D PLUG-IN C D WITHDR. C D T1-T2-T3 78 221 149 150 - - T4-T5-T6 107 192 157 142 190 109 XT1-XT3 74 225 124 175 - - XT2-XT4 86 213 136 163 170 129 T1-T2 78 296 149 225 - - T4-T5-T6 107 267 157 217 190 184 XT1-XT3 74 300 124 250 - - XT2-XT4 86 288 136 238 170 204 Depth 300mm > The measurements are in millimetres 7/18 1STC008001D0204 | ABB Technical catalogue ArTu K Useful space inside the switchgear Depth 500mm Depth 700/900mm F H USEFUL SPACE FOR BARS E USEFUL SPACE FOR BARS G 50 50 7 FIXED E F PLUG-IN E F WITHDR. E F T1-T2-T3 78 493 149 425 - - Depth 700mm T4-T5-T6 107 467 157 417 190 384 T7-X 1 146 428 - - 251 XT1-XT3 74 500 124 450 - XT2-XT4 86 488 136 438 170 FIXED G H PLUG-IN G H WITHDR. G H T1-T2-T3 78 696 149 625 - - 323 T4-T5-T6 107 667 157 617 190 584 - T7-X 1 146 628 - - 251 523 404 E1-E2-E3-E4 266 508 - - 378 396 XT1-XT3 74 700 124 650 - - XT2-XT4 86 688 136 638 170 604 T1-T2 78 896 149 825 - - T4-T5-S6 107 867 157 817 190 784 T7-X 1 146 828 - - 251 723 E1-E2-E3-E4-E6 266 708 - - 378 596 XT1-XT3 74 900 124 850 - - XT2-XT4 86 888 136 838 170 804 Depth 900mm > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/19 Overall dimensions ArTu L-M-K structures Kit for apparatus Panels for apparatus mounted on DIN rail 1 DIN row 2 DIN rows 3 DIN rows W=390mm (12 DIN mod.) W=600mm (24 DIN mod.) W=800mm (36 DIN mod.) W=1000mm (48 DIN mod.) W=600mm (48 DIN mod.) W=800mm (72 DIN mod.) W=600mm (72 mod.DIN) Width 390mm Width 600/800mm Width 600mm = 7 74,5 99,5 199 150 299 = 200 216 386 74,5 599 432/634 Width 600/800mm = 200 596/796 = 149 432/634 596/796 99,5 432 596 Width 600/800/1000mm = 199 = 432/634/845 596/796/996 Version for Tmax with diff. mod. 99.5 299 199.5 432/634/845 596/796/996 Version for Unifix H = 299 = 432/634 596/796 > The measurements are in millimetres 7/20 1STC008001D0204 | ABB Technical catalogue Kit for apparatus Blind flat plates - PF Useful dimensions B B B A A A ArTu L ArTu M-K d=150m ArTu K without segregation W=800mm W=600mm W=800mm W=390mm W=600mm W=800mm B A B A B A B A B A B A B A B 440 440 440 440 440 175 275 375 575 775 592 592 592 592 592 184 384 - 449 449 - 184 384 - 649 649 - 184 284 384 584 - 284 284 284 284 - 184 284 384 584 - 440 440 440 440 - 184 284 384 584 - 650 650 650 650 - 184 284 384 584 775 850 850 850 850 850 H functional (mm) W=600mm A 200 300 400 600 800 175 275 375 575 775 B W=1000mm .5 7 78 39 8 ø4 A ArTu K segregated H functional (mm) W=390mm A B A B A B A B 200 300 400 600 800 190 290 390 590 - 374 374 374 374 - 190 290 390 590 790 584 584 584 584 584 190 290 390 590 790 784 784 784 784 784 190 290 390 590 - 984 984 984 984 - W=800mm W=600mm W=1000mm Blind recessed plates - FR Useful dimensions B A ArTu M-K d=150m ArTu K without segregation H functional (mm) W=600mm A B A B A B A B 200 400 600 191 391 - 426 426 - 191 391 - 626 626 - 180 257 400 526 526 526 180 257 400 726 726 726 W=600mm W=800mm W=800mm > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/21 Overall dimensions ArTu L-M-K structures Kit for apparatus ArTu L-M-K Blind and ventilated panels ArTu L-M-K Panels for instruments ArTu L-M-K Blind and recessed panels 68 195 199 68 199 H A 596/796/996 596/796 596/796/996 92 Blind H (mm) Ventilated H (mm) 99 199 299 399 499 99 199 92 B C 199 596/796 A 596/796 599 799 7 ArTu K Adjustable back plate D C Code C D PF1806 PF1808 PF2006 PF2008 1776 1776 1966 1966 580 780 580 780 > The measurements are in millimetres 7/22 1STC008001D0204 | ABB Technical catalogue Code A B C PR2600 PR2800 PR4600 PR4800 506 706 506 706 308 308 399 399 PR6600 PR6800 506 706 508 508 599 599 Distribution systems Busbar with shaped section Busbars Insulators BA0400 20 PB 0803 1730 273,5 BA0800 20 1730 39 20 20 68 68 68 20 PB 0802 229 20 103,5 20 BA1250 20 1730 20 45 45 60 PB 1601 45 349,9 78,5 60 7 BA1600 20 1730 86 86 86 20 PB 1600 348 60 204 BA2000 25 1730 60 60 86 86 86 20 PB 1603 250 124,5 60 Accessories AD1077 65 5 68 68 68 20 PB 3201 405 22 90 158 60 Ø9 91 98.5 93.5 25 > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/23 Overall dimensions ArTu L-M-K structures Distribution systems Flat busbars Busbars Insulators A Insulators for busbars up to 630A 1750 Ø6,5 25 BP0634 BP0630 50 B 128 Code In (A) A B BR0250 250 5 15 BR0400 400 5 25 BR0630 630 10 30 BR4005 400 5 32 25 60 60 245 60 230 Insulators for busbars up to 6300A BP1600 BP1250 300 1750 C 123 300 5 10 30÷125 Ø10, 5 30÷125 7 70 75 D 70 70 70 BP2500 480 10 10 30÷125 Code In (A) C D BR6305 630 5 50 BR8005 800 5 63 BR1250 1250 5 100 BR1600 1600 10 100 E 110 BP3200 110 110 480 10 1750 10 30÷125 F 110 110 110 BP1621/BP1622 480 10 Code In (A) C D BR2000 4000 10 120 BR2500 5000 10 160 BR2010 6300 10 200 10 160÷200 110 > The measurements are in millimetres 7/24 1STC008001D0204 | ABB Technical catalogue 110 110 70 70 Distribution systems Unifix cabling system Unifix H 24 - 36 modules Front view Side view 442 / 642 9 78 80 A 425 / 625 30 300 128 300 7 300 Unifix L Front view Side view 36 modules 48 A 438 18 modules 323 12 modules 8 modules B 638 24 modules 218 148 150/200 40/60 150/200 150/200 ArTu L Wall-mounted ArTu L Floor mounted ArTu M Wall-mounted (D=150mm) ArTu M Wall-mounted (D=200mm) ArTu M Floor mounted ArTu K (D=150mm) ArTu K (D=225mm) ArTu K (D=300mm) ArTu K (D=500mm) ArTu K (D=700mm) ArTu K (D=900mm) A B 29 29 21 21 40 50 50 50 50 50 50 104 140 73 123 152 173 248 323 523 723 923 > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/25 Overall dimensions ArTu L-M-K structures Accessories Aluminium section EV1050 Aluminium nuts for EV1050 EV1056 10.7 EV1058 18 10 19 15 19 8 8 6MA 8MA 30 Brackets for cables EV1090 / EV1091 Angles for busbars EV105 7 9.5x32 30 42 20 Ø6 A B 9.5x17 A B EV1090 49 20 EV1091 65 36 EV1092 85 51 EV1093 106 80 > The measurements are in millimetres 7/26 1STC008001D0204 | ABB Technical catalogue 32 Accessories Terminal box supports EV1110 EV1112 6 MA 8 22 9 12.5 7 48.5 5.5 MA 13 41.1 12 49 13 Ø6,5 7x12 10 Ø6.5 7x10 10 Ø5.2 20 55 22 50 70 20 10 7x12 6 MA 7x12 13 79 11 Depth adapter AP6000 7 AP6001 24 24 23.5 16.5 33.45 38 37.5 25.5 33.45 38 > The measurements are in millimetres ABB Technical catalogue | 1STC008001D0204 7/27 Order codes Gemini switchboards 8/2 ArTu L structures 8/4 ArTu M structures 8/8 ArTu K structures 8/12 8 ABB Technical catalogue | 1STC008001D0904 8/1 Gemini switchboards Order codes 8 Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page 05 270 Gemini 0 2/16 1SL0255A00 Gemini 1,8 2/12 1SL0314A00 Gemini 0,812 2/13 05 272 Gemini 0 2/16 1SL0256A00 Gemini 4,1 2/12 1SL0315A00 Gemini 1,15 2/13 05 274 Gemini 0 2/16 1SL0259A00 Gemini 1,13 2/17 1SL0324A00 Gemini 0,175 2/15 05 276 Gemini 0 2/16 1SL0260A00 Gemini 2,75 2/17 1SL0325A00 Gemini 0,256 2/15 05 278 Gemini 0 2/16 1SL0261A00 Gemini 3,65 2/17 1SL0326A00 Gemini 0,14 2/15 05 280 Gemini 0 2/16 1SL0262A00 Gemini 4,875 2/17 1SL0327A00 Gemini 0,45 2/15 05 282 Gemini 0 2/16 1SL0263A00 Gemini 5,975 2/17 1SL0330A00 Gemini 0,316 2/15 12 849 Gemini 0 2/22 1SL0264A00 Gemini 10,75 2/17 1SL0331A00 Gemini 0,408 2/15 12 851 Gemini 0 2/22 1SL0267A00 Gemini 0,575 2/17 1SL0332A00 Gemini 0,612 2/15 12 863 Gemini 0 2/22 1SL0268A00 Gemini 1,35 2/17 1SL0333A00 Gemini 0,837 2/15 1SL0201A00 Gemini 4,76 2/11 1SL0269A00 Gemini 1,7 2/17 1SL0336A00 Gemini 0,965 2/14 1SL0202A00 Gemini 7,94 2/11 1SL0270A00 Gemini 2,362 2/17 1SL0337A00 Gemini 1,25 2/14 1SL0203A00 Gemini 10,65 2/11 1SL0271A00 Gemini 2,9 2/17 1SL0338A00 Gemini 1,9 2/14 1SL0204A00 Gemini 12,78 2/11 1SL0272A00 Gemini 5,35 2/17 1SL0339A00 Gemini 0,01 2/19 1SL0205A00 Gemini 17,97 2/11 1SL0275A00 Gemini 0,608 2/17 1SL0340A00 Gemini 0,044 2/19 1SL0206A00 Gemini 25,55 2/11 1SL0276A00 Gemini 1,458 2/17 1SL0341A00 Gemini 0,012 2/19 1SL0211A00 Gemini 4,76 2/11 1SL0277A00 Gemini 0,62 2/17 1SL0342A00 Gemini 0,0685 2/19 1SL0212A00 Gemini 7,94 2/11 1SL0278A00 Gemini 2,55 2/17 1SL0343A00 Gemini 0,625 2/19 1SL0213A00 Gemini 10,65 2/11 1SL0279A00 Gemini 3,1 2/17 1SL0344A00 Gemini 0,8325 2/19 1SL0214A00 Gemini 12,78 2/11 1SL0280A00 Gemini 5 2/17 1SL0345A00 Gemini 1,75 2/19 1SL0215A00 Gemini 17,97 2/11 1SL0283A00 Gemini 0,34 2/13 1SL0346A00 Gemini 2,275 2/19 1SL0216A00 Gemini 25,55 2/11 1SL0284A00 Gemini 0,745 2/13 1SL0351A00 Gemini 0,033 2/22 1SL0221A00 Gemini 3,64 2/11 1SL0285A00 Gemini 1,092 2/13 1SL0352A00 Gemini 5,85 2/19 1SL0222A00 Gemini 6,08 2/11 1SL0286A00 Gemini 1,43 2/13 1SL0353A00 Gemini 0,19 2/16 1SL0223A00 Gemini 8,2 2/11 1SL0287A00 Gemini 2,66 2/13 1SL0354A00 Gemini 0,2 2/16 1SL0224A00 Gemini 9,48 2/11 1SL0290A00 Gemini 0,18 2/13 1SL0355A00 Gemini 0,25 2/16 1SL0225A00 Gemini 14 2/11 1SL0291A00 Gemini 0,23 2/13 1SL0356A00 Gemini 0,337 2/16 1SL0226A00 Gemini 19,56 2/11 1SL0292A00 Gemini 0,3 2/13 1SL0360A00 Gemini 0,15 2/16 1SL0231A00 Gemini 1,12 2/12 1SL0293A00 Gemini 0,45 2/13 1SL0361A00 Gemini 0,2125 2/16 1SL0232A00 Gemini 1,86 2/12 1SL0296A00 Gemini 0,483 2/15 1SL0362A00 Gemini 0,23 2/16 1SL0233A00 Gemini 2,45 2/12 1SL0297A00 Gemini 0,7 2/15 1SL0363A00 Gemini 0,375 2/16 1SL0234A00 Gemini 3,3 2/12 1SL0298A00 Gemini 0,975 2/15 1SL0370A00 Gemini 1,875 2/14 1SL0235A00 Gemini 3,97 2/12 1SL0299A00 Gemini 1,5 2/15 1SL0371A00 Gemini 2,7 2/14 1SL0236A00 Gemini 5,99 2/12 1SL0302A00 Gemini 1,5 2/15 1SL0372A00 Gemini 3,85 2/14 1SL0241A00 Gemini 1,12 2/12 1SL0302A00 Gemini 1,5 2/15 1SL0373A00 Gemini 0,965 2/14 1SL0242A00 Gemini 1,86 2/12 1SL0303A00 Gemini 2,05 2/15 1SL0374A00 Gemini 1,25 2/14 1SL0243A00 Gemini 2,45 2/12 1SL0303A00 Gemini 2,05 2/15 1SL0375A00 Gemini 1,9 2/14 1SL0244A00 Gemini 3,3 2/12 1SL0304A00 Gemini 3,1 2/15 1SL0376A00 Gemini 1,875 2/14 1SL0245A00 Gemini 3,97 2/12 1SL0304A00 Gemini 3,1 2/15 1SL0377A00 Gemini 2,7 2/14 1SL0246A00 Gemini 5,99 2/12 1SL0307A00 Gemini 0,345 2/13 1SL0378A00 Gemini 3,85 2/14 1SL0251A00 Gemini 0,455 2/12 1SL0308A00 Gemini 0,482 2/13 1SL0380A00 Gemini 0,048 2/22 1SL0252A00 Gemini 0,725 2/12 1SL0309A00 Gemini 0,56 2/13 1SL0381A00 Gemini 0 2/22 1SL0253A00 Gemini 1,106 2/12 1SL0310A00 Gemini 0,95 2/13 1SL0382A00 Gemini 0,026 2/22 1SL0254A00 Gemini 1,35 2/12 1SL0313A00 Gemini 0,6 2/13 1SL0383A00 Gemini 0,108 2/17 8/2 1STC008001D0904 | ABB Technical catalogue Code Structure Weight Kg. Page Code Structure Weight Kg. Page 1SL0384A00 Gemini 0,006 2/22 ED2993 Gemini 1645 2/18 1SL0385A00 Gemini 0,316 2/19 ED3009 Gemini 2316 2/18 1SL0386A00 Gemini 0,601 2/19 ED3017 Gemini 2850 2/18 1SL0387A00 Gemini 0,764 2/19 ED3025 Gemini 4050 2/18 1SL0388A00 Gemini 0,959 2/19 ED3033 Gemini 510 2/18 1SL0389A00 Gemini 1,91 2/19 ED3041 Gemini 435 2/18 1SL0390A00 Gemini 2,495 2/19 ED3058 Gemini 384 2/18 1SL0397A00 Gemini 0,038 2/22 ED3066 Gemini 509 2/18 1SL0401A00 Gemini 0,625 2/19 ED3082 Gemini 1480 2/18 1SL0413A00 Gemini 0,825 2/20 ED3090 Gemini 3360 2/18 1SL0414A00 Gemini 0,875 2/20 ED3101 Gemini 0,3 2/18 1SL0415A00 Gemini 1,24 2/20 ED3102 Gemini 0,3 2/18 1SL0416A00 Gemini 1,85 2/20 ED3103 Gemini 0,3 2/18 1SL0423A00 Gemini 0,8 2/20 ED3104 Gemini 0,3 2/18 1SL0424A00 Gemini 0,825 2/20 ED3108 Gemini 300 2/18 1SL0425A00 Gemini 1,15 2/20 ED3116 Gemini 350 2/18 1SL0426A00 Gemini 1,83 2/20 ED3124 Gemini 498 2/18 1SL0433A00 Gemini 2,265 2/21 ED3132 Gemini 1977 2/18 1SL0434A00 Gemini 2,775 2/21 ED3272 Gemini 607 2/18 1SL0435A00 Gemini 3,29 2/21 ED3280 Gemini 608 2/18 1SL0436A00 Gemini 4,58 2/21 ED3298 Gemini 574 2/18 1SL0451A00 Gemini 0,482 2/21 ED3355 Gemini 400 2/18 1SL0452A00 Gemini 0,765 2/21 ED3363 Gemini 500 2/18 1SL0454A00 Gemini 0,985 2/21 ED3371 Gemini 600 2/18 1SL0455A00 Gemini 1,825 2/21 ED3405 Gemini 3700 2/18 1SL0456A00 Gemini 2,13 2/21 ED3413 Gemini 4800 2/18 1SL0457A00 Gemini 0,0105 2/22 ED3439 Gemini 7800 2/18 1SL0458A00 Gemini 0,089 2/19 EN0105K Gemini 0,09 2/21 1SL0459A00 Gemini 0,017 2/19 EN0150K Gemini 0,18 2/21 1SL0464A00 Gemini 11,8 2/20 EN0204K Gemini 0,3 2/21 1SL0465A00 Gemini 13,6 2/20 1SL0466A00 Gemini 16,2 2/20 1SL0470A00 Gemini 1,35 2/22 1SL0471A00 Gemini 2 2/22 1SL0472A00 Gemini 3,05 2/22 1SL0473A00 Gemini 3,35 2/22 ED0025 Gemini 11555 2/18 ED0026 Gemini 8000 2/18 ED2944 Gemini 2154 2/18 ED2951 Gemini 3336 2/18 ED2961 Gemini 0,4 2/18 ED2962 Gemini 0,6 2/18 ED2969 Gemini 4,5 2/18 ED2977 Gemini 6700 2/18 Code Structure Weight Kg. Page 8 ABB Technical catalogue | 1STC008001D0904 8/3 ArTu L structures Order codes 8 Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page AA1000 ArTu L 0,15 3/46 AD1090 ArTu L 0,51 3/49 ED2225 ArTu L 2,1 3/44 AA1001 ArTu L 0,15 3/46 AD1091 ArTu L 0,33 3/49 ED2233 ArTu L 2,3 3/44 AA1560 ArTu L 0,02 3/49 AD1096 ArTu L 0,15 3/30 ED2241 ArTu L 1,7 3/44 AA1570 ArTu L 0,03 3/49 AD1097 ArTu L 0,56 3/30 ED2258 ArTu L 2,4 3/44 AA5600 ArTu L 20 3/47 AD1097 ArTu L 0,56 3/43 ED2266 ArTu L 2,7 3/44 AA6100 ArTu L 0,01 3/49 AD1098 ArTu L 0,96 3/30 ED2274 ArTu L 2,7 3/44 AA6120 ArTu L 0,01 3/49 AD1099 ArTu L 0,61 3/46 ED2282 ArTu L 2,196 3/44 AA6140 ArTu L 0,01 3/49 AD1101 ArTu L 0,05 3/32 ED2290 ArTu L 3 3/44 AA6160 ArTu L 0,02 3/49 AD1102 ArTu L 0,02 3/32 ED2308 ArTu L 3180 3/44 AA6180 ArTu L 0,02 3/49 AD1103 ArTu L 0,02 3/32 ED2316 ArTu L 3,48 3/44 AA6200 ArTu L 0,02 3/49 AD1104 ArTu L 0,02 3/32 ED2324 ArTu L 2,76 3/44 AA8004 ArTu L 0,01 3/49 AD1390 ArTu L 3/32 ED2332 ArTu L 3,1 3/44 AD1004 ArTu L 0,55 3/47 AD1600 ArTu L 0,24 3/32 ED2340 ArTu L 3 3/44 AD1005 ArTu L 0,42 3/46 AD1800 ArTu L 0,36 3/32 ED2357 ArTu L 2,76 3/44 AD1006 ArTu L 0,55 3/47 AD3301 ArTu L 0,15 3/49 ED2365 ArTu L 3,48 3/44 AD1007 ArTu L 0,25 3/47 AD3302 ArTu L 0,15 3/49 ED2373 ArTu L 1,104 3/44 AD1009 ArTu L 0,086 3/30 AD3303 ArTu L 0,15 3/49 ED2373 ArTu L 1,104 3/44 AD1022 ArTu L 0,32 3/49 AD3304 ArTu L 0,15 3/49 ED2373 ArTu L 1,104 3/44 AD1027 ArTu L 0,69 3/47 AL1000 ArTu L 0,18 3/46 ED2381 ArTu L 1,024 3/44 AD1027 ArTu L 0,69 3/47 AL1001 ArTu L 1,35 3/46 ED2399 ArTu L 0,92 3/44 AD1028 ArTu L 0,306 3/47 AL2000 ArTu L 0,12 3/46 ED2407 ArTu L 1,56 3/44 AD1029 ArTu L 0,41 3/47 AP6000 ArTu L 0,01 3/30 ED2531 ArTu L 972 3/43 AD1030 ArTu L 0,438 3/47 BA0400 ArTu L 3,3 3/38 ED2549 ArTu L 972 3/43 AD1031 ArTu L 0,518 3/47 BA0800 ArTu L 4,5 3/38 ED2550 ArTu L 880 3/43 AD1033 ArTu L 0,22 3/49 BF1602 ArTu L 2,7 3/41 ED2551 ArTu L 1600 3/43 AD1034 ArTu L 2 3/47 BF2502 ArTu L 4,2 3/41 ED2552 ArTu L 1540 3/43 AD1036 ArTu L 0,07 3/49 BF4002 ArTu L 3 3/41 ED2553 ArTu L 1540 3/43 AD1038 ArTu L 0,14 3/47 BF4012 ArTu L 6,5 3/41 ED2554 ArTu L 1540 3/43 AD1053 ArTu L 2,95 3/47 BP0630 ArTu L 0,4 3/40 ED2556 ArTu L 1037 3/43 AD1056 ArTu L 0,3 3/38 BP0632 ArTu L 0,55 3/40 ED2557 ArTu L 0 3/43 AD1058 ArTu L 0,01 3/49 BP0634 ArTu L 0,45 3/40 ED2558 ArTu L 0 3/43 AD1064 ArTu L 0,26 3/38 BR0250 ArTu L 1,3 3/40 ED2559 ArTu L 0 3/43 AD1065 ArTu L 0,2 3/39 BR0400 ArTu L 2,8 3/40 ED2560 ArTu L 0 3/43 AD1068 ArTu L 1,07 3/38 BR0630 ArTu L 6,2 3/40 ED2564 ArTu L 948 3/43 AD1070 ArTu L 0,03 3/49 ED0001 ArTu L 0,22 3/44 ED2572 ArTu L 1038 3/43 AD1075 ArTu L 0,55 3/47 ED0002 ArTu L 0,28 3/44 ED2590 ArTu L 972 3/43 AD1076 ArTu L 0,25 3/47 ED0003 ArTu L 0,29 3/44 ED2598 ArTu L 1068 3/43 AD1077 ArTu L 1,05 3/38 ED0004 ArTu L 0,29 3/44 ED2606 ArTu L 1156 3/43 AD1080 ArTu L 0,25 3/47 ED0025 ArTu L 11555 3/45 ED2654 ArTu L 800 3/43 AD1081 ArTu L 0,25 3/47 ED0026 ArTu L 8000 3/45 ED2662 ArTu L 800 3/43 AD1083 ArTu L 0,25 3/47 ED2183 ArTu L 3100 3/43 ED2670 ArTu L 972 3/43 AD1086 ArTu L 3,51 3/32 ED2191 ArTu L 4100 3/43 ED2720 ArTu L 1198 3/43 AD1088 ArTu L 1,41 3/32 ED2209 ArTu L 1450 3/43 ED2738 ArTu L 1203 3/43 AD1089 ArTu L 2,08 3/32 ED2217 ArTu L 2,04 3/44 ED2746 ArTu L 1287 3/43 8/4 1STC008001D0904 | ABB Technical catalogue Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page ED2753 ArTu L 1166 3/43 EV1037 ArTu L 0,04 3/49 IP1000 ArTu L 0,71 3/28 ED2845 ArTu L 576 3/44 EV1039 ArTu L 0,04 3/49 IP1001 ArTu L 0,49 3/28 ED2852 ArTu L 576 3/44 EV1050 ArTu L 6,88 3/48 IP1200 ArTu L 0,85 3/28 ED2894 ArTu L 900 3/43 EV1051 ArTu L 1 3/48 IP1201 ArTu L 0,58 3/28 ED2902 ArTu L 841 3/43 EV1056 ArTu L 0,328 3/48 IP1400 ArTu L 0,99 3/28 ED2910 ArTu L 867 3/43 EV1058 ArTu L 0,576 3/48 IP1401 ArTu L 0,68 3/28 ED2928 ArTu L 915 3/43 EV1090 ArTu L 0,456 3/48 IP1600 ArTu L 1,13 3/28 ED2936 ArTu L 580 3/44 EV1091 ArTu L 0,88 3/48 IP1601 ArTu L 0,78 3/28 ED2944 ArTu L 2154 3/45 EV1092 ArTu L 0,55 3/48 IP1800 ArTu L 1,28 3/28 ED2951 ArTu L 3336 3/45 EV1093 ArTu L 0,55 3/48 IP1801 ArTu L 0,88 3/28 ED2961 ArTu L 0,4 3/45 EV1110 ArTu L 2,74 3/46 IP2000 ArTu L 1,37 3/28 ED2962 ArTu L 0,6 3/45 EV1112 ArTu L 2,74 3/46 IP2001 ArTu L 0,96 3/28 ED2969 ArTu L 4,5 3/45 EV1113 ArTu L 0,125 3/46 KB1001 ArTu L 0,5 3/42 ED2977 ArTu L 6700 3/45 EV1119 ArTu L 3,6 3/41 KB1002 ArTu L 0,95 3/42 ED2985 ArTu L 1137 3/45 EV1120 ArTu L 4,5 3/41 KB1006 ArTu L 0,75 3/42 ED2993 ArTu L 1645 3/45 EV1121 ArTu L 8,85 3/41 KB1010 ArTu L 0,6 3/42 ED3009 ArTu L 2316 3/45 EV1122 ArTu L 2,44 3/41 KB1014 ArTu L 0,76 3/42 ED3017 ArTu L 2850 3/45 EV1123 ArTu L 2,49 3/41 KB1018 ArTu L 0,64 3/42 ED3025 ArTu L 4050 3/45 EV1124 ArTu L 2,77 3/41 KB1019 ArTu L 3,59 3/42 ED3033 ArTu L 510 3/45 EV1125 ArTu L 2,77 3/41 KB1020 ArTu L 4,59 3/42 ED3041 ArTu L 435 3/45 EV1135 ArTu L 0,24 3/32 KB1021 ArTu L 5,25 3/42 ED3058 ArTu L 384 3/45 EV1136 ArTu L 0,16 3/32 KB1022 ArTu L 5,59 3/42 ED3066 ArTu L 509 3/45 EV1150 ArTu L 0,1 3/48 KB1024 ArTu L 6,59 3/42 ED3082 ArTu L 1480 3/45 EV1151 ArTu L 0,1 3/48 KO1260 ArTu L 4,78 3/33 ED3090 ArTu L 3360 3/45 EV1152 ArTu L 0,1 3/48 KO1261 ArTu L 4,78 3/33 ED3101 ArTu L 0,3 3/45 EV1153 ArTu L 0,1 3/48 KO1262 ArTu L 3,08 3/33 ED3102 ArTu L 0,3 3/45 EV1154 ArTu L 0,1 3/48 KO1280 ArTu L 6,59 3/33 ED3103 ArTu L 0,3 3/45 EV1155 ArTu L 0,01 3/48 KO1281 ArTu L 6,59 3/33 ED3104 ArTu L 0,3 3/45 EV1156 ArTu L 0,07 3/48 LF1400 ArTu L 10,17 3/24 ED3108 ArTu L 300 3/45 EV2110 ArTu L 0,558 3/46 LF1600 ArTu L 11,61 3/24 ED3116 ArTu L 350 3/45 EV2112 ArTu L 0,558 3/46 LF1800 ArTu L 13,05 3/24 ED3124 ArTu L 498 3/45 GD1512 ArTu L 0,72 3/30 LF2000 ArTu L 14,5 3/24 ED3132 ArTu L 1977 3/45 GD1515 ArTu L 3/30 LK1000 ArTu L 3,39 3/35 ED3272 ArTu L 607 3/45 GD1520 ArTu L 0,8 3/30 LK1001 ArTu L 3,39 3/36 ED3280 ArTu L 608 3/45 GD1520 ArTu L 0,8 3/45 LK1002 ArTu L 2,64 3/37 ED3298 ArTu L 574 3/45 GD1530 ArTu L 1,79 3/30 LK1004 ArTu L 3,39 3/35 ED3355 ArTu L 400 3/45 GD1530 ArTu L 1,79 3/45 LK1008 ArTu L 4,03 3/37 ED3363 ArTu L 500 3/45 IP0600 ArTu L 0,43 3/28 LK1100 ArTu L 4,52 3/35 ED3371 ArTu L 600 3/45 IP0601 ArTu L 0,89 3/28 LK1101 ArTu L 4,52 3/37 ED3405 ArTu L 3700 3/45 IP0602 ArTu L 0,44 3/28 LK1104 ArTu L 4,76 3/35 ED3413 ArTu L 4800 3/45 IP0603 ArTu L 0,29 3/28 LK2000 ArTu L 3,44 3/35 ED3439 ArTu L 7800 3/45 IP0604 ArTu L 1,25 3/28 LK2001 ArTu L 3,39 3/36 EV1008 ArTu L 0,04 3/49 IP0800 ArTu L 0,57 3/28 LK2002 ArTu L 2,64 3/37 EV1036 ArTu L 0,04 3/49 IP0801 ArTu L 0,39 3/28 LK2004 ArTu L 3,39 3/35 ABB Technical catalogue | 1STC008001D0904 8 8/5 ArTu L structures Order codes Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page LK2008 ArTu L 4,11 3/37 LX1006 ArTu L 3,561 3/36 MI1800 ArTu L 5,02 3/23 LK2100 ArTu L 4,58 3/35 LX1008 ArTu L 4,03 3/37 MI2000 ArTu L 5,57 3/23 LK2101 ArTu L 4,62 3/37 LX1100 ArTu L 3,819 3/35 PA1600 ArTu L 2,6 3/34 ArTu L 3,963 3/37 PA2600 ArTu L 2,94 3/34 3/38 LK2104 ArTu L 4,85 3/35 LX1101 LK3000 ArTu L 3,45 3/35 LX1104 ArTu L 4,76 3/35 PB0802 ArTu L 0,66 LK3001 ArTu L 3,39 3/36 LX1108 ArTu L 5,427 3/37 PB0803 ArTu L 0,4 3/38 LK3002 ArTu L 3,28 3/37 LX2000 ArTu L 2,672 3/35 PC0300 ArTu L 1,49 3/33 LK3003 ArTu L 3,58 3/37 LX2001 ArTu L 3,61 3/36 PC0600 ArTu L LK3004 ArTu L 5,09 3/35 LX2002 ArTu L 3,048 3/37 PC0580 ArTu L 0,74 3/34 LK3005 ArTu L 5,09 3/36 LX2004 ArTu L 2,518 3/35 PC0600 ArTu L 3,2 3/33 3/37 LX2008 ArTu L 3,55 3/37 PC0601 ArTu L 6,16 3/26 ArTu L 5,022 3/37 PC0602 ArTu L 3,44 3/26 LK3008 1,82 LK3101 ArTu L 6,79 3/37 LX2101 LK3102 ArTu L 9,23 3/37 LX2300 ArTu L 3,048 3/37 PC0801 ArTu L 8,21 3/26 LK3104 ArTu L 6,79 3/35 LX3000 ArTu L 2,642 3/35 PC0802 ArTu L 4,59 3/26 3/37 LX3001 ArTu L 3,282 3/36 PC1001 ArTu L 10,27 3/26 ArTu L 3,28 3/37 PC1002 ArTu L 5,74 3/26 LK3105 8 ArTu L 3/33 ArTu L 9,23 LK3110 ArTu L 4,6 3/35 LX3002 LK3111 ArTu L 4,68 3/37 LX3003 ArTu L 2,429 3/37 PC1050 ArTu L 0,45 3/34 LK3200 ArTu L 3,51 3/36 LX3004 ArTu L 3,648 3/35 PC1150 ArTu L 1,13 3/34 ArTu L 3,603 3/36 PC1201 ArTu L 12,32 3/26 LK3300 ArTu L 4,57 3/36 LX3005 LK3301 ArTu L 3,66 3/35 LX3008 ArTu L 1,82 3/37 PC1202 ArTu L 7,18 3/26 LK4003 ArTu L 3,28 3/35 LX3101 ArTu L 4,977 3/37 PC1401 ArTu L 14,38 3/26 LK4004 ArTu L 3,28 3/35 LX3104 ArTu L 6,79 3/35 PC1402 ArTu L 8,37 3/26 ArTu L 9,23 3/37 PC1403 ArTu L 0,38 3/34 LK4005 ArTu L 6,43 3/36 LX3105 LK4006 ArTu L 7,26 3/36 LX3110 ArTu L 3,788 3/35 PC1436 ArTu L 18,48 3/26 LK4007 ArTu L 4,11 3/37 LX3200 ArTu L 3,65 3/36 PC1580 ArTu L 2,22 3/34 LK4100 ArTu L 3,44 3/36 LX3300 ArTu L 4,57 3/36 PC1600 ArTu L 0,96 3/34 ArTu L 2,63 3/35 PC1601 ArTu L 16,32 3/26 LK4103 ArTu L 4,37 3/35 LX4003 LK4104 ArTu L 4,37 3/35 LX4004 ArTu L 3,28 3/35 PC1602 ArTu L 9,5 3/26 LK4105 ArTu L 8,75 3/37 LX4005 ArTu L 3,248 3/36 PC1636 ArTu L 20,98 3/26 3/37 LX4006 ArTu L 7,26 3/36 PC1660 ArTu L 13,5 3/34 ArTu L 4,11 3/37 PC1680 ArTu L 18,3 3/34 LK4106 ArTu L 9,69 LK4108 ArTu L 4,58 3/37 LX4007 LK5003 ArTu L 4,51 3/35 LX4008 ArTu L 4,25 3/36 PC1800 ArTu L 1,27 3/34 LK5004 ArTu L 4,51 3/35 LX4100 ArTu L 3,158 3/36 PC1801 ArTu L 18,26 3/26 3/36 MC0600 ArTu L 3,69 3/22 PC1802 ArTu L 10,64 3/26 ArTu L 4,92 3/22 PC1836 ArTu L 23,53 3/26 LK5005 ArTu L 6,53 LK5006 ArTu L 7,11 3/36 MC0800 LK5007 ArTu L 4,11 3/37 MC1000 ArTu L 6,15 3/22 PC1860 ArTu L 15 3/34 LK5008 ArTu L 3,47 3/37 MC1200 ArTu L 7,38 3/22 PC1880 ArTu L 20,25 3/34 LK5103 ArTu L 6,01 3/35 MC1400 ArTu L 8,61 3/24 PC2001 ArTu L 20,28 3/26 LK5104 ArTu L 5,76 3/35 MC1600 ArTu L 9,85 3/24 PC2002 ArTu L 11,82 3/26 LK5105 ArTu L 8,7 3/37 MC1800 ArTu L 11,09 3/24 PC2035 ArTu L 26,07 3/26 LK5106 ArTu L 9,69 3/37 MC2000 ArTu L 12,32 3/24 PC2060 ArTu L 16,875 3/34 7,09 3/36 MI0600 ArTu L 1,67 3/22 PC2080 ArTu L 22,57 3/34 LK6011 ArTu L LK6012 ArTu L 9,45 3/37 MI0800 ArTu L 2,23 3/22 PC2401 ArTu L 0,61 3/34 LX1000 ArTu L 2,7 3/35 MI1000 ArTu L 2,79 3/22 PC2600 ArTu L 1,4 3/34 LX1001 ArTu L 2,672 3/36 MI1200 ArTu L 3,34 3/22 PC2800 ArTu L 2,6 3/34 ArTu L 3,9 3/23 PC3401 ArTu L 1,04 3/34 ArTu L 4,45 3/23 PC3600 ArTu L 1,96 3/34 LX1002 ArTu L 2,64 3/37 MI1400 LX1005 ArTu L 2,672 3/35 MI1600 8/6 1STC008001D0904 | ABB Technical catalogue Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page PC3800 ArTu L 3,23 3/34 PS2728 ArTu L 2,45 3/32 SV1000 ArTu L 2,08 3/27 PC4401 ArTu L 1,36 3/34 PS2960 ArTu L 1,27 3/32 SV1200 ArTu L 2,49 3/27 PC4600 ArTu L 2,45 3/34 PS2968 ArTu L 2,45 3/32 SV1400 ArTu L 2,91 3/27 PC4800 ArTu L 4,41 3/34 PS4720 ArTu L 1,27 3/32 SV1600 ArTu L 3,33 3/27 PC6401 ArTu L 2,05 3/34 PS4728 ArTu L 2,45 3/32 SV1800 ArTu L 3,74 3/27 PC6600 ArTu L 4,41 3/34 PS4960 ArTu L 1,3 3/32 SV2000 ArTu L 4,16 3/27 PC6800 ArTu L 6,37 3/34 PS4968 ArTu L 2,5 3/32 TL1000 ArTu L 0,7 3/29 PC8401 ArTu L 2,67 3/34 PV0600 ArTu L 6,16 3/25 TL1000 ArTu L 0,7 3/39 PC8600 ArTu L 5,39 3/34 PV0800 ArTu L 8,21 3/25 TL1000 ArTu L 0,7 3/40 PC8800 ArTu L 8,58 3/34 PV1000 ArTu L 10,27 3/25 TL1100 ArTu L 0,85 3/29 PF1002 ArTu L 1,45 3/33 PV1200 ArTu L 12,32 3/25 TL1100 ArTu L 0,85 3/39 PF1003 ArTu L 2,23 3/33 PV1400 ArTu L 14,38 3/25 TL1100 ArTu L 0,85 3/40 PF1004 ArTu L 3,02 3/33 PV1400 ArTu L 14,38 3/25 TL2000 ArTu L 0,68 3/29 PF1006 ArTu L 4,58 3/33 PV1424 ArTu L 19,48 3/25 TL2000 ArTu L 0,68 3/39 PF1008 ArTu L 6,33 3/33 PV1600 ArTu L 16,32 3/25 TL2100 ArTu L 0,82 3/29 PF1102 ArTu L 1,94 3/33 PV1600 ArTu L 16,32 3/25 TL2100 ArTu L 0,82 3/39 PF1103 ArTu L 2,98 3/33 PV1624 ArTu L 22,17 3/25 TL3000 ArTu L 0,52 3/29 PF1104 ArTu L 4,03 3/33 PV1800 ArTu L 18,26 3/25 TL3000 ArTu L 0,52 3/39 PF1106 ArTu L 6,1 3/33 PV1800 ArTu L 18,26 3/25 TL3000 ArTu L 0,52 3/40 PF1108 ArTu L 8,44 3/33 PV1824 ArTu L 24,86 3/25 TS4000 ArTu L 2 3/47 PM1500 ArTu L 1,13 3/31 PV2000 ArTu L 20,29 3/25 TS4001 ArTu L 2,5 3/47 PM1536 ArTu L 1,47 3/31 PV2000 ArTu L 20,29 3/25 TS4002 ArTu L 2 3/47 PM2312 ArTu L 2,93 3/31 PV2024 ArTu L 27,55 3/25 TS4003 ArTu L 2 3/47 PM2315 ArTu L 3,9 3/31 RC1000 ArTu L 14,41 3/29 TS4011 ArTu L 2 3/47 PM2612 ArTu L 0,652 3/31 RC2000 ArTu L 10,19 3/29 TS4012 ArTu L 2 3/47 PM2624 ArTu L 1,2 3/31 SH0100 ArTu L 1,155 3/28 TS4013 ArTu L 2 3/47 PM2624 ArTu L 1,2 3/45 SH0200 ArTu L 1,419 3/28 TU8000 ArTu L 1,35 3/46 PM2836 ArTu L 2 3/31 SH0208 ArTu L 1,82 3/28 VB7035 ArTu L 0,6 3/49 PM2836 ArTu L 2 3/45 SH0600 ArTu L 0,52 3/27 VC0600 ArTu L 5,74 3/22 PM3624 ArTu L 2,87 3/31 SH0608 ArTu L 1,26 3/27 VC0800 ArTu L 7,65 3/22 PM3624 ArTu L 2,87 3/44 SH0700 ArTu L 0,46 3/27 VC1000 ArTu L 9,56 3/22 PM3648 ArTu L 2,87 3/31 SH0708 ArTu L 1,12 3/27 VC1200 ArTu L 11,48 3/22 PM3836 ArTu L 3,82 3/31 SH0800 ArTu L 0,69 3/27 VC1400 ArTu L 13,39 3/23 PM3836 ArTu L 3,82 3/44 SH0808 ArTu L 1,67 3/27 VC1425 ArTu L 7,67 3/23 PM3872 ArTu L 3,82 3/31 SL0600 ArTu L 9,84 3/22 VC1600 ArTu L 14,66 3/23 PM6672 ArTu L 4,41 3/31 SL0800 ArTu L 13,12 3/22 VC1625 ArTu L 8,77 3/23 PO1431 ArTu L 6,02 3/27 SL1000 ArTu L 16,4 3/22 VC1800 ArTu L 15,9 3/23 PO1631 ArTu L 12 3/27 SL1200 ArTu L 19,67 3/22 VC1825 ArTu L 9,86 3/23 PO1831 ArTu L 8 3/27 SL1400 ArTu L 22,49 3/23 VC2000 ArTu L 17,66 3/23 PO2031 ArTu L 9 3/27 SL1408 ArTu L 28,92 3/23 VC2025 ArTu L 10,96 3/23 PR2600 ArTu L 1,96 3/34 SL1600 ArTu L 24,95 3/23 ZL1000 ArTu L 2,48 3/24 PR2800 ArTu L 2,74 3/34 SL1608 ArTu L 33,05 3/23 ZL1001 ArTu L 1,1 3/24 PR4401 ArTu L 1,614 3/34 SL1800 ArTu L 27,9 3/23 ZL1101 ArTu L 1,44 3/24 PR4600 ArTu L 3,92 3/34 SL1808 ArTu L 37,19 3/23 ZL2001 ArTu L 0,66 3/24 PR4800 ArTu L 4,12 3/34 SL2000 ArTu L 31,1 3/23 ZL3000 ArTu L 1,45 3/24 PR6600 ArTu L 5,39 3/34 SL2008 ArTu L 41,32 3/23 PR6800 ArTu L 6,86 3/34 SV0600 ArTu L 1,25 3/27 PS2720 ArTu L 1,27 3/32 SV0800 ArTu L 1,66 3/27 ABB Technical catalogue | 1STC008001D0904 8 8/7 ArTu M structures Order codes 8 Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page AA1206 ArTu M 0 4/41 AD1077 ArTu M 1,05 4/34 ED2191 ArTu M 4100 4/38 AA1560 ArTu M 0,02 4/46 AD1080 ArTu M 0,25 4/44 ED2209 ArTu M 1450 4/38 AA1570 ArTu M 0,03 4/46 AD1081 ArTu M 0,25 4/44 ED2217 ArTu M 2,04 4/39 AA5600 ArTu M 20 4/42 AD1083 ArTu M 0,25 4/44 ED2225 ArTu M 2,1 4/39 ArTu M 3,51 4/27 ED2233 ArTu M 2,3 4/39 AA6100 ArTu M 0,01 4/46 AD1086 AA6120 ArTu M 0,01 4/46 AD1088 ArTu M 1,41 4/27 ED2241 ArTu M 1,7 4/39 AA6140 ArTu M 0,01 4/46 AD1089 ArTu M 2,08 4/27 ED2258 ArTu M 2,4 4/39 AA6160 ArTu M 0,02 4/46 AD1090 ArTu M 0,51 4/47 ED2266 ArTu M 2,7 4/39 AA6180 ArTu M 0,02 4/46 AD1091 ArTu M 0,33 4/47 ED2274 ArTu M 2,7 4/39 AA6200 ArTu M 0,02 4/46 AD1101 ArTu M 0,05 4/27 ED2282 ArTu M 2,196 4/39 AA8004 ArTu M 0,01 4/46 AD1102 ArTu M 0,02 4/27 ED2290 ArTu M 3 4/39 ArTu M 0,02 4/27 ED2308 ArTu M 3180 4/39 0,02 4/27 ED2316 ArTu M 3,48 4/39 4/27 ED2324 ArTu M 2,76 4/39 AA9600 ArTu M 0,5 4/41 AD1103 AD1004 ArTu M 0,55 4/44 AD1104 ArTu M AD1006 ArTu M 0,55 4/44 AD1390 ArTu M AD1007 ArTu M 0,25 4/44 AD1600 ArTu M 0,24 4/27 ED2332 ArTu M 3,1 4/39 AD1009 ArTu M 0,086 4/30 AD1800 ArTu M 0,36 4/27 ED2340 ArTu M 3 4/39 AD1012 ArTu M 0,2 4/41 AD3301 ArTu M 0,15 4/47 ED2357 ArTu M 2,76 4/39 AD1022 ArTu M 0,32 4/47 AD3302 ArTu M 0,15 4/47 ED2365 ArTu M 3,48 4/39 ArTu M 0,15 4/47 ED2373 ArTu M 1,104 4/39 AD1027 ArTu M 0,69 4/44 AD3303 AD1027 ArTu M 0,69 4/44 AD3304 ArTu M 0,15 4/47 ED2373 ArTu M 1,104 4/39 AD1028 ArTu M 0,306 4/44 AP6000 ArTu M 0,01 4/30 ED2373 ArTu M 1,104 4/39 AD1029 ArTu M 0,41 4/44 AZ4000 ArTu M 3,5 4/47 ED2381 ArTu M 1,024 4/39 AD1030 ArTu M 0,438 4/44 BA0400 ArTu M 3,3 4/34 ED2399 ArTu M 0,92 4/39 AD1031 ArTu M 0,518 4/44 BA0800 ArTu M 4,5 4/34 ED2407 ArTu M 1,56 4/39 AD1033 ArTu M 0,22 4/47 BF1602 ArTu M 2,7 4/37 ED2531 ArTu M 972 4/38 ArTu M 4,2 4/37 ED2549 ArTu M 972 4/38 AD1034 ArTu M 2 4/44 BF2502 AD1035 ArTu M 0,12 4/44 BF4002 ArTu M 3 4/37 ED2550 ArTu M 880 4/38 AD1036 ArTu M 0,07 4/47 BF4012 ArTu M 6,5 4/37 ED2551 ArTu M 1600 4/38 AD1037 ArTu M 0,352 4/30 BP0630 ArTu M 0,4 4/36 ED2552 ArTu M 1540 4/38 AD1041 ArTu M 0,34 4/43 BP0632 ArTu M 0,55 4/36 ED2553 ArTu M 1540 4/38 AD1044 ArTu M 0,99 4/43 BR0250 ArTu M 1,3 4/36 ED2554 ArTu M 1540 4/38 AD1053 ArTu M 2,95 4/44 BR0400 ArTu M 2,8 4/36 ED2556 ArTu M 1037 4/38 ArTu M 6,2 4/36 ED2557 ArTu M 0 4/38 AD1054 ArTu M 0,9 4/43 BR0630 AD1055 ArTu M 1,67 4/43 CA1401 ArTu M 1,237 4/47 ED2558 ArTu M 0 4/38 AD1056 ArTu M 0,3 4/34 CA1600 ArTu M 1,571 4/47 ED2559 ArTu M 0 4/38 AD1058 ArTu M 0,01 4/46 CA1800 ArTu M 1,77 4/47 ED2560 ArTu M 0 4/38 AD1061 ArTu M 0,88 4/28 CA2000 ArTu M 1,97 4/47 ED2564 ArTu M 948 4/38 AD1061 ArTu M 0,88 4/38 ED0001 ArTu M 0,22 4/39 ED2572 ArTu M 1038 4/38 AD1064 ArTu M 0,26 4/34 ED0002 ArTu M 0,28 4/39 ED2590 ArTu M 972 4/38 ArTu M 0,29 4/39 ED2598 ArTu M 1068 4/38 AD1065 ArTu M 0,2 4/34 ED0003 AD1068 ArTu M 1,07 4/34 ED0004 ArTu M 0,29 4/39 ED2606 ArTu M 1156 4/38 AD1070 ArTu M 0,03 4/47 ED0025 ArTu M 11555 4/40 ED2654 ArTu M 800 4/38 AD1075 ArTu M 0,55 4/44 ED0026 ArTu M 8000 4/40 ED2662 ArTu M 800 4/38 AD1076 ArTu M 0,25 4/44 ED2183 ArTu M 3100 4/38 ED2670 ArTu M 972 4/38 8/8 1STC008001D0904 | ABB Technical catalogue Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page ArTu M 7800 4/40 ED2720 ArTu M 1198 4/38 ED3439 GD6009 ArTu M 2,4 4/28 ED2738 ArTu M 1203 4/38 EV1008 ArTu M 0,04 4/46 GD6010 ArTu M 1,6 4/28 ArTu M 0,04 4/46 ED2746 ArTu M 1287 4/38 EV1036 GD8002 ArTu M 1 4/28 ED2753 ArTu M 1166 4/38 EV1037 ArTu M 0,04 4/46 GD8010 ArTu M 1,9 4/28 ED2845 ArTu M 576 4/39 EV1039 ArTu M 0,04 4/46 IP3031 ArTu M 0,7 4/26 ED2852 ArTu M 576 4/39 EV1050 ArTu M 6,88 4/45 IP3061 ArTu M 0,7 4/26 ED2894 ArTu M 900 4/38 EV1051 ArTu M 1 4/45 IP3081 ArTu M 0,7 4/26 ED2902 ArTu M 841 4/38 EV1056 ArTu M 0,328 4/45 IP3140 ArTu M 0,7 4/26 ED2910 ArTu M 867 4/38 EV1058 ArTu M 0,576 4/45 IP3142 ArTu M 0,7 4/26 ArTu M 0,456 4/45 ED2928 ArTu M 915 4/38 EV1090 IP3160 ArTu M 0,7 4/26 ED2936 ArTu M 580 4/39 EV1091 ArTu M 0,88 4/45 IP3162 ArTu M 0,7 4/26 ED2944 ArTu M 2154 4/40 EV1092 ArTu M 0,55 4/45 IP3181 ArTu M 0,7 4/26 ED2951 ArTu M 3336 4/40 EV1093 ArTu M 0,55 4/45 IP3183 ArTu M 0,7 4/26 ED2961 ArTu M 0,4 4/40 EV1110 ArTu M 2,74 4/43 IP3201 ArTu M 0,7 4/26 ED2962 ArTu M 0,6 4/40 EV1112 ArTu M 2,74 4/43 IP3203 ArTu M 0,7 4/26 ED2969 ArTu M 4,5 4/40 EV1113 ArTu M 0,125 4/43 KL2103 ArTu M 5,1 4/32 ArTu M 3,6 4/37 ED2977 ArTu M 6700 4/40 EV1119 KL3103 ArTu M 7,1 4/32 ED2985 ArTu M 1137 4/40 EV1120 ArTu M 4,5 4/37 KL3113 ArTu M 4,95 4/32 ED2993 ArTu M 1645 4/40 EV1121 ArTu M 8,85 4/37 KL3613 ArTu M 4,594 4/32 ED3009 ArTu M 2316 4/40 EV1122 ArTu M 2,44 4/37 KL4115 ArTu M 6,55 4/32 ED3017 ArTu M 2850 4/40 EV1123 ArTu M 2,49 4/37 KL4116 ArTu M 3,93 4/32 ED3025 ArTu M 4050 4/40 EV1124 ArTu M 2,77 4/37 KL5102 ArTu M 15,42 4/33 ED3033 ArTu M 510 4/40 EV1125 ArTu M 2,77 4/37 KL5114 ArTu M 9,22 4/32 ArTu M 0,24 4/27 ED3041 ArTu M 435 4/40 EV1135 KL5116 ArTu M 5,9 4/32 ED3058 ArTu M 384 4/40 EV1136 ArTu M 0,16 4/27 KL5212 ArTu M 12,25 4/33 ED3066 ArTu M 509 4/40 EV1150 ArTu M 0,1 4/45 KL6113 ArTu M 12,71 4/32 ED3082 ArTu M 1480 4/40 EV1151 ArTu M 0,1 4/45 KL6213 ArTu M 12,71 4/33 ED3090 ArTu M 3360 4/40 EV1152 ArTu M 0,1 4/45 KO2260 ArTu M 6,31 4/33 ED3101 ArTu M 0,3 4/40 EV1153 ArTu M 0,1 4/45 KO2261 ArTu M 6,31 4/33 ED3102 ArTu M 0,3 4/40 EV1154 ArTu M 0,1 4/45 KO2280 ArTu M 8,18 4/33 ArTu M 0,01 4/45 4/33 ED3103 ArTu M 0,3 4/40 EV1155 KO2281 ArTu M 8,18 ED3104 ArTu M 0,3 4/40 EV1156 ArTu M 0,07 4/45 KT1102 ArTu M 4 4/32 ED3108 ArTu M 300 4/40 EV2110 ArTu M 0,558 4/43 KT1117 ArTu M 3,89 4/32 ED3116 ArTu M 350 4/40 EV2112 ArTu M 0,558 4/43 KT2102 ArTu M 4 4/32 ED3124 ArTu M 498 4/40 FR2601 ArTu M 5 4/30 KT2117 ArTu M 3,89 4/32 ED3132 ArTu M 1977 4/40 FR2801 ArTu M 6 4/30 KT3102 ArTu M 5,6 4/32 ED3272 ArTu M 607 4/40 FR4601 ArTu M 10,5 4/30 KT3112 ArTu M 3,9 4/32 ArTu M 11,5 4/30 ED3280 ArTu M 608 4/40 FR4801 KT3118 ArTu M 3,13 4/32 ED3298 ArTu M 574 4/40 GC6002 ArTu M 1 4/28 KT3212 ArTu M 5,6 4/33 ED3355 ArTu M 400 4/40 GC8002 ArTu M 1 4/28 KT4102 ArTu M 11,56 4/33 ED3363 ArTu M 500 4/40 GD1520 ArTu M 0,8 4/40 KT4110 ArTu M 2,95 4/32 ED3371 ArTu M 600 4/40 GD1530 ArTu M 1,79 4/40 KT4112 ArTu M 2,8 4/32 ED3405 ArTu M 3700 4/40 GD6002 ArTu M 1 4/28 KT4212 ArTu M 9,25 4/33 ED3413 ArTu M 4800 4/40 GD6008 ArTu M 2,4 4/28 KT5102 ArTu M 11,42 4/33 ABB Technical catalogue | 1STC008001D0904 8 8/9 ArTu M structures Order codes 8 Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page KT5110 ArTu M 4,43 4/32 PC3800 ArTu M 3,23 4/31 PR4600 ArTu M 3,92 4/31 KT5112 ArTu M 5,8 4/32 PC4600 ArTu M 2,45 4/31 PR4800 ArTu M 4,12 4/31 KT5212 ArTu M 8,25 4/33 PC4800 ArTu M 4,41 4/31 PR6600 ArTu M 5,39 4/31 KT6113 ArTu M 9,53 4/32 PC6600 ArTu M 4,41 4/31 PR6800 ArTu M 6,86 4/31 ArTu M 6,37 4/31 PS2720 ArTu M 1,27 4/27 KT6213 ArTu M 9,53 4/33 PC6800 KX1602 ArTu M 3,702 4/32 PC8600 ArTu M 5,39 4/31 PS2728 ArTu M 2,45 4/27 KX1603 ArTu M 5,64 4/33 PC8800 ArTu M 8,58 4/31 PS2960 ArTu M 1,27 4/27 KX1604 ArTu M 5,64 4/33 PF2610 ArTu M 2,5 4/30 PS2968 ArTu M 2,45 4/27 KX1617 ArTu M 3,663 4/32 PF2810 ArTu M 3,6 4/30 PS4720 ArTu M 1,27 4/27 KX1618 ArTu M 5,64 4/33 PF4610 ArTu M 4,5 4/30 PS4728 ArTu M 2,45 4/27 KX2602 ArTu M 3,539 4/32 PF4810 ArTu M 7,5 4/30 PS4960 ArTu M 1,3 4/27 ArTu M 2,93 4/29 PS4968 ArTu M 2,5 4/27 KX2604 ArTu M 4,25 4/33 PM2312 KX2619 ArTu M 3,592 4/32 PM2315 ArTu M 3,9 4/29 PV1060 ArTu M 10,5 4/24 KX3602 ArTu M 5,6 4/32 PM2624 ArTu M 1,2 4/29 PV1260 ArTu M 12 4/24 KX3603 ArTu M 7,1 4/32 PM2624 ArTu M 1,2 4/40 PV1460 ArTu M 15 4/24 KX3609 ArTu M 5,64 4/33 PM2836 ArTu M 2 4/29 PV1660 ArTu M 17 4/24 KX3612 ArTu M 3,596 4/32 PM2836 ArTu M 2 4/40 PV1680 ArTu M 21,5 4/24 KX3614 ArTu M 5,6 4/33 PM3624 ArTu M 2,87 4/29 PV1688 ArTu M 32 4/24 ArTu M 2,87 4/39 PV1860 ArTu M 19,5 4/24 KX3618 ArTu M 3,13 4/32 PM3624 KX4602 ArTu M 11,56 4/33 PM3648 ArTu M 2,87 4/29 PV1880 ArTu M 24,2 4/24 KX4604 ArTu M 5,45 4/33 PM3836 ArTu M 3,82 4/29 PV1888 ArTu M 35 4/24 KX4610 ArTu M 2,95 4/32 PM3836 ArTu M 3,82 4/39 PV2060 ArTu M 21,5 4/24 KX4612 ArTu M 3,539 4/32 PM3872 ArTu M 3,82 4/29 PV2080 ArTu M 27 4/24 KX4614 ArTu M 4,899 4/33 PM6672 ArTu M 4,41 4/29 PV2088 ArTu M 38 4/24 KX4615 ArTu M 6,55 4/32 PO1060 ArTu M 12 4/25 PV4060 ArTu M 7 4/47 ArTu M 13 4/25 PV6060 ArTu M 7 4/24 LF1425 ArTu M 9,5 4/23 PO1260 LF1625 ArTu M 10,8 4/23 PO1460 ArTu M 15,5 4/25 PV8060 ArTu M 9 4/24 LF1825 ArTu M 12 4/23 PO1630 ArTu M 14 4/25 SA1350 ArTu M 2,2 4/41 LF2025 ArTu M 13,5 4/23 PO1631 ArTu M 12 4/23 SH6001 ArTu M 2,7 4/42 PA1600 ArTu M 2,6 4/31 PO1660 ArTu M 17,5 4/25 SH8001 ArTu M 3,7 4/42 PA2600 ArTu M 2,94 4/31 PO1680 ArTu M 22 4/25 SM1462 ArTu M 40,96 4/22 PB0802 ArTu M 0,66 4/34 PO1830 ArTu M 13 4/25 SM1662 ArTu M 44,69 4/22 ArTu M 8 4/23 SM1682 ArTu M 45,18 4/22 PB0803 ArTu M 0,4 4/34 PO1831 PC1600 ArTu M 0,96 4/31 PO1860 ArTu M 19 4/25 SM1862 ArTu M 48,51 4/22 PC1660 ArTu M 13,5 4/31 PO1880 ArTu M 23 4/25 SM1882 ArTu M 49 4/22 PC1680 ArTu M 18,3 4/31 PO2030 ArTu M 14 4/25 SM2062 ArTu M 52,43 4/22 PC1800 ArTu M 1,27 4/31 PO2031 ArTu M 9 4/23 SM2082 ArTu M 52,82 4/22 PC1860 ArTu M 15 4/31 PO2060 ArTu M 22 4/25 TR2001 ArTu M 0,22 4/42 PC1880 ArTu M 20,25 4/31 PO2080 ArTu M 26 4/25 TR3001 ArTu M 0,78 4/35 ArTu M 7,5 4/25 TR3001 ArTu M 0,78 4/42 PC2060 ArTu M 16,875 4/31 PO6060 PC2080 ArTu M 22,57 4/31 PO6069 ArTu M 10 4/47 TS4000 ArTu M 2 4/43 PC2600 ArTu M 1,4 4/31 PO8060 ArTu M 10 4/25 TS4001 ArTu M 2,5 4/43 PC2800 ArTu M 2,6 4/31 PR2600 ArTu M 1,96 4/31 TS4002 ArTu M 2 4/43 PC3600 ArTu M 1,96 4/31 PR2800 ArTu M 2,74 4/31 TS4003 ArTu M 2 4/43 8/10 1STC008001D0904 | ABB Technical catalogue Code Structure Weight Kg. Page TS4011 ArTu M 2 4/43 TS4012 ArTu M 2 4/43 TS4013 ArTu M 2 4/43 TV2000 ArTu M 0,47 4/35 TV2000 ArTu M 0,47 4/42 TV6200 ArTu M 0,46 4/35 TV6200 ArTu M 0,46 4/35 TV6200 ArTu M 0,46 4/36 TV8200 ArTu M 0,75 4/35 TV8200 ArTu M 0,75 4/35 TV8200 ArTu M 0,75 4/36 TV8200 ArTu M 0,75 4/36 VB7035 ArTu M 0,6 4/47 VB7035 ArTu M 0,6 4/47 VC1622 ArTu M 15 4/22 VC1632 ArTu M 20,58 4/23 VC1822 ArTu M 16 4/22 VC1832 ArTu M 22,54 4/23 VC2022 ArTu M 18 4/22 VC2032 ArTu M 29,4 4/23 ZD2325 ArTu M 3,8 4/47 ZD2625 ArTu M 8,5 4/47 ZD2825 ArTu M 10 4/47 Code Structure Weight Kg. Page Code Structure Weight Kg. Page 8 ABB Technical catalogue | 1STC008001D0904 8/11 ArTu K structures Order codes 8 Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page AA1560 ArTu K 0,02 5/106 AD1058 ArTu K 0,01 5/106 BA1250 ArTu K 9,16 5/88 AA1570 ArTu K 0,03 5/106 AD1061 ArTu K 0,88 5/63 BA1600 ArTu K 10,72 5/88 AA5600 ArTu K 20 5/103 AD1061 ArTu K 0,88 5/95 BA2000 ArTu K 15,7 5/88 AA6100 ArTu K 0,01 5/106 AD1063 ArTu K 4,16 5/89 BF1602 ArTu K 2,7 5/94 ArTu K 0,26 5/88 BF2502 ArTu K 4,2 5/94 AA6120 ArTu K 0,01 5/106 AD1064 AA6140 ArTu K 0,01 5/106 AD1065 ArTu K 0,2 5/89 BF4002 ArTu K 3 5/94 AA6160 ArTu K 0,02 5/106 AD1066 ArTu K 0,096 5/89 BF4012 ArTu K 6,5 5/94 AA6180 ArTu K 0,02 5/106 AD1067 ArTu K 0,2 5/89 BF6302 ArTu K 12,5 5/94 AA6200 ArTu K 0,02 5/106 AD1068 ArTu K 1,07 5/89 BF8002 ArTu K 19,1 5/94 AA8004 ArTu K 0,01 5/106 AD1069 ArTu K 2,4 5/89 BP0630 ArTu K 0,4 5/92 AA9610 ArTu K 0,5 5/98 AD1070 ArTu K 0,03 5/107 BP0632 ArTu K 0,55 5/92 ArTu K 0,25 5/88 BP0634 ArTu K 0,45 5/92 AD1001 ArTu K 0,2 5/107 AD1071 AD1004 ArTu K 0,55 5/104 AD1072 ArTu K 0,32 5/88 BP1250 ArTu K 2,8 5/92 AD1006 ArTu K 0,55 5/104 AD1073 ArTu K 6,55 5/89 BP1600 ArTu K 2,6 5/92 AD1007 ArTu K 0,25 5/104 AD1075 ArTu K 0,55 5/104 BP1621 ArTu K 42,74 5/92 AD1009 ArTu K 0,086 5/66 AD1076 ArTu K 0,25 5/104 BP1622 ArTu K 51,44 5/92 AD1014 ArTu K 0,5 5/98 AD1077 ArTu K 1,05 5/89 BP2500 ArTu K 4,3 5/92 AD1015 ArTu K 0,2 5/103 AD1078 ArTu K 6,38 5/89 BP3200 ArTu K 4,4 5/92 ArTu K 0,25 5/104 BR0250 ArTu K 1,3 5/92 AD1022 ArTu K 0,32 5/107 AD1080 AD1024 ArTu K 5,5 5/87 AD1081 ArTu K 0,25 5/104 BR0400 ArTu K 2,8 5/92 AD1025 ArTu K 6 5/87 AD1083 ArTu K 0,25 5/104 BR0630 ArTu K 6,2 5/92 AD1027 ArTu K 0,69 5/104 AD1086 ArTu K 3,51 5/65 BR1250 ArTu K 14,5 5/92 AD1027 ArTu K 0,69 5/104 AD1088 ArTu K 1,41 5/65 BR1600 ArTu K 29 5/92 AD1028 ArTu K 0,306 5/104 AD1089 ArTu K 2,08 5/65 BR2000 ArTu K 34,8 5/92 AD1029 ArTu K 0,41 5/104 AD1090 ArTu K 0,51 5/107 BR2010 ArTu K 63,36 5/92 ArTu K 0,33 5/107 BR2500 ArTu K 46,4 5/92 AD1030 ArTu K 0,438 5/104 AD1091 AD1031 ArTu K 0,518 5/104 AD1092 ArTu K 1,62 5/107 BR4005 ArTu K 4,4 5/92 AD1033 ArTu K 0,22 5/107 AD1101 ArTu K 0,05 5/65 BR6305 ArTu K 6,5 5/92 AD1034 ArTu K 2 5/104 AD1102 ArTu K 0,02 5/65 BR8005 ArTu K 8,6 5/92 AD1035 ArTu K 0,12 5/104 AD1103 ArTu K 0,02 5/65 BS3250 ArTu K 1,6 5/92 AD1036 ArTu K 0,07 5/107 AD1104 ArTu K 0,02 5/65 BS5050 ArTu K 1,8 5/92 AD1037 ArTu K 0,352 5/66 AD1390 ArTu K 5/65 BS6350 ArTu K 2,25 5/92 ArTu K 0,24 5/65 CA1600 ArTu K 1,571 5/107 AD1041 ArTu K 0,34 5/103 AD1600 AD1042 ArTu K 0,2 5/87 AD1800 ArTu K 0,36 5/65 CA1800 ArTu K 1,77 5/107 AD1047 ArTu K 0,2 5/107 AD1808 ArTu K 0,18 5/98 CA2000 ArTu K 1,97 5/107 AD1048 ArTu K 0,2 5/107 AD3301 ArTu K 0,15 5/107 ED0001 ArTu K 0,22 5/96 AD1049 ArTu K 2,45 5/78 AD3302 ArTu K 0,15 5/107 ED0002 ArTu K 0,28 5/96 AD1050 ArTu K 2,45 5/78 AD3303 ArTu K 0,15 5/107 ED0003 ArTu K 0,29 5/96 AD1051 ArTu K 2,94 5/78 AD3304 ArTu K 0,15 5/107 ED0004 ArTu K 0,29 5/96 ArTu K 0,01 5/66 ED0025 ArTu K 11555 5/97 AD1053 ArTu K 2,95 5/104 AP6000 AD1054 ArTu K 0,9 5/103 AZ4000 ArTu K 3,5 5/99 ED0026 ArTu K 8000 5/97 AD1055 ArTu K 1,67 5/103 AZ4000 ArTu K 3,5 5/107 ED2183 ArTu K 3100 5/95 AD1056 ArTu K 0,3 5/88 BA0400 ArTu K 3,3 5/88 ED2191 ArTu K 4100 5/95 AD1057 ArTu K 28 5/107 BA0800 ArTu K 4,5 5/88 ED2209 ArTu K 1450 5/95 8/12 1STC008001D0904 | ABB Technical catalogue Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page ArTu K 1287 5/95 ED2217 ArTu K 2,04 5/96 ED2746 EV1036 ArTu K 0,04 5/106 ED2225 ArTu K 2,1 5/96 ED2753 ArTu K 1166 5/95 EV1037 ArTu K 0,04 5/106 ArTu K 576 5/96 ED2233 ArTu K 2,3 5/96 ED2845 EV1039 ArTu K 0,04 5/106 ED2241 ArTu K 1,7 5/96 ED2852 ArTu K 576 5/96 EV1050 ArTu K 6,88 5/105 ED2258 ArTu K 2,4 5/96 ED2894 ArTu K 900 5/95 EV1051 ArTu K 1 5/105 ED2266 ArTu K 2,7 5/96 ED2902 ArTu K 841 5/95 EV1056 ArTu K 0,328 5/105 ED2274 ArTu K 2,7 5/96 ED2910 ArTu K 867 5/95 EV1058 ArTu K 0,576 5/105 ED2282 ArTu K 2,196 5/96 ED2928 ArTu K 915 5/95 EV1090 ArTu K 0,456 5/105 ED2290 ArTu K 3 5/96 ED2936 ArTu K 580 5/96 EV1091 ArTu K 0,88 5/105 ArTu K 2154 5/97 ED2308 ArTu K 3180 5/96 ED2944 EV1092 ArTu K 0,55 5/105 ED2316 ArTu K 3,48 5/96 ED2951 ArTu K 3336 5/97 EV1093 ArTu K 0,55 5/105 ED2324 ArTu K 2,76 5/96 ED2961 ArTu K 0,4 5/97 EV1110 ArTu K 2,74 5/103 ED2332 ArTu K 3,1 5/96 ED2962 ArTu K 0,6 5/97 EV1111 ArTu K 0,68 5/103 ED2340 ArTu K 3 5/96 ED2969 ArTu K 4,5 5/97 EV1112 ArTu K 2,74 5/103 ED2357 ArTu K 2,76 5/96 ED2977 ArTu K 6700 5/97 EV1113 ArTu K 0,125 5/103 ED2365 ArTu K 3,48 5/96 ED2985 ArTu K 1137 5/97 EV1122 ArTu K 2,44 5/103 ArTu K 1645 5/97 ED2373 ArTu K 1,104 5/96 ED2993 EV1123 ArTu K 2,49 5/103 ED2373 ArTu K 1,104 5/96 ED3009 ArTu K 2316 5/97 EV1124 ArTu K 2,77 5/103 ED2373 ArTu K 1,104 5/96 ED3017 ArTu K 2850 5/97 EV1125 ArTu K 2,77 5/103 ED2381 ArTu K 1,024 5/96 ED3025 ArTu K 4050 5/97 EV1135 ArTu K 0,24 5/65 ED2399 ArTu K 0,92 5/96 ED3033 ArTu K 510 5/97 EV1136 ArTu K 0,16 5/65 ED2407 ArTu K 1,56 5/96 ED3041 ArTu K 435 5/97 EV1150 ArTu K 0,1 5/105 ED2531 ArTu K 972 5/95 ED3058 ArTu K 384 5/97 EV1151 ArTu K 0,1 5/105 ArTu K 509 5/97 ED2549 ArTu K 972 5/95 ED3066 EV1152 ArTu K 0,1 5/105 ED2550 ArTu K 880 5/95 ED3082 ArTu K 1480 5/97 EV1153 ArTu K 0,1 5/105 ED2551 ArTu K 1600 5/95 ED3090 ArTu K 3360 5/97 EV1154 ArTu K 0,1 5/105 ED2552 ArTu K 1540 5/95 ED3101 ArTu K 0,3 5/97 EV1155 ArTu K 0,01 5/105 ED2553 ArTu K 1540 5/95 ED3102 ArTu K 0,3 5/97 EV1156 ArTu K 0,07 5/105 ED2554 ArTu K 1540 5/95 ED3103 ArTu K 0,3 5/97 EV2110 ArTu K 0,558 5/103 ED2556 ArTu K 1037 5/95 ED3104 ArTu K 0,3 5/97 EV2112 ArTu K 0,558 5/103 ArTu K 300 5/97 ED2557 ArTu K 0 5/95 ED3108 FH1020 ArTu K 6,42 5/84 ED2558 ArTu K 0 5/95 ED3116 ArTu K 350 5/97 FH1030 ArTu K 8,23 5/84 ED2559 ArTu K 0 5/95 ED3124 ArTu K 498 5/97 FH1040 ArTu K 10,06 5/84 ED2560 ArTu K 0 5/95 ED3132 ArTu K 1977 5/97 FH1050 ArTu K 11,97 5/84 ED2564 ArTu K 948 5/95 ED3272 ArTu K 607 5/97 FH1060 ArTu K 13,92 5/84 ED2572 ArTu K 1038 5/95 ED3280 ArTu K 608 5/97 FH3190 ArTu K 8,746 5/85 ED2590 ArTu K 972 5/95 ED3298 ArTu K 574 5/97 FH3191 ArTu K 7,854 5/85 ArTu K 400 5/97 ED2598 ArTu K 1068 5/95 ED3355 FH3220 ArTu K 5 5/84 ED2606 ArTu K 1156 5/95 ED3363 ArTu K 500 5/97 FH3224 ArTu K 2,33 5/84 ED2654 ArTu K 800 5/95 ED3371 ArTu K 600 5/97 FH3430 ArTu K 8,13 5/84 ED2662 ArTu K 800 5/95 ED3405 ArTu K 3700 5/97 FH3434 ArTu K 3,5 5/84 ED2670 ArTu K 972 5/95 ED3413 ArTu K 4800 5/97 FH3540 ArTu K 9,31 5/84 ED2720 ArTu K 1198 5/95 ED3439 ArTu K 7800 5/97 FH3544 ArTu K 4,66 5/84 ED2738 ArTu K 1203 5/95 EV1008 ArTu K 0,04 5/106 FH3650 ArTu K 10,78 5/84 ABB Technical catalogue | 1STC008001D0904 8/13 8 ArTu K structures Order codes 8 Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page EV1119 ArTu K 3,6 5/103 FV3558 ArTu K 12 5/85 KE3205 ArTu K 13 5/83 EV1120 ArTu K 4,5 5/103 FV3668 ArTu K 13 5/85 KE3215 ArTu K 13 5/76 EV1121 ArTu K 8,85 5/103 FV3788 ArTu K 15 5/85 KE3235 ArTu K 13 5/76 FH3680 ArTu K 11 5/84 FV4456 ArTu K 2,34 5/85 KE3236 ArTu K 18 5/83 ArTu K 16,5 5/76 FH3690 ArTu K 5,248 5/85 FV4458 ArTu K 4,4 5/85 KE4000 FH3691 ArTu K 4,68 5/85 FV4556 ArTu K 4 5/85 KE4100 ArTu K 16,5 5/83 FH3760 ArTu K 12,74 5/84 FV4557 ArTu K 1,85 5/85 KE4214 ArTu K 13 5/83 FH3764 ArTu K 7,1 5/84 FV4558 ArTu K 4,5 5/85 KE4215 ArTu K 13 5/76 FH3780 ArTu K 12 5/84 FV4668 ArTu K 5,5 5/85 KE4234 ArTu K 13 5/83 FH3960 ArTu K 3,5 5/85 FV4788 ArTu K 6,5 5/85 KE4235 ArTu K 13 5/76 FH3960 ArTu K 3,5 5/85 GC6002 ArTu K 1 5/63 KE5214 ArTu K 13,2 5/83 ArTu K 13,2 5/76 FH3961 ArTu K 3,12 5/85 GC8002 ArTu K 1 5/63 KE5215 FH3965 ArTu K 6,5 5/85 GD1000 ArTu K 1,75 5/63 KE5234 ArTu K 13,2 5/83 FH3966 ArTu K 6,22 5/85 GD1001 ArTu K 1,437 5/79 KE5235 ArTu K 13,2 5/76 FH4220 ArTu K 0,228 5/84 GD4002 ArTu K 0,8 5/63 KE5236 ArTu K 16,5 5/83 FH4220 ArTu K 0,228 5/84 GD4005 ArTu K 0,8 5/79 KE5237 ArTu K 16,5 5/76 FH4220 ArTu K 0,228 5/84 GD6002 ArTu K 1 5/63 KE6340 ArTu K 16,2 5/83 FH4220 ArTu K 0,228 5/84 GD6008 ArTu K 2,4 5/63 KE6341 ArTu K 16,2 5/76 ArTu K 16,2 5/76 FH4430 ArTu K 0,9 5/84 GD6009 ArTu K 2,4 5/63 KE6342 FH4430 ArTu K 0,9 5/84 GD6010 ArTu K 1,6 5/63 KE6343 ArTu K 16,2 5/83 FH4540 ArTu K 1,1 5/84 GD6011 ArTu K 1,68 5/63 KI4114 ArTu K 12,65 5/72 FH4540 ArTu K 1,1 5/84 GD7005 ArTu K 0,9 5/79 KI4115 ArTu K 12,65 5/72 FH4650 ArTu K 1,3 5/84 GD8002 ArTu K 1 5/63 KI4116 ArTu K 22,45 5/80 FH4650 ArTu K 1,3 5/84 GD8010 ArTu K 1,9 5/63 KI4117 ArTu K 25,68 5/80 FH4760 ArTu K 1,5 5/84 GD9005 ArTu K 1,15 5/79 KI4118 ArTu K 25,68 5/80 ArTu K 22,45 5/80 FH4760 ArTu K 1,5 5/84 IP3010 ArTu K 0,66 5/59 KI4119 FH7510 ArTu K 13,92 5/84 IP3030 ArTu K 0,7 5/59 KI5114 ArTu K 12,65 5/72 FH7580 ArTu K 11,135 5/84 IP3040 ArTu K 0,5 5/59 KI5115 ArTu K 12,65 5/72 FR2600 ArTu K 5 5/77 IP3060 ArTu K 0,62 5/59 KI5116 ArTu K 22,45 5/80 FR2601 ArTu K 5 5/70 IP3080 ArTu K 0,7 5/59 KI5117 ArTu K 25,68 5/81 FR2800 ArTu K 6 5/77 IP3161 ArTu K 0,6 5/59 KI5118 ArTu K 25,68 5/81 FR2801 ArTu K 6 5/70 IP3163 ArTu K 0,6 5/59 KI5119 ArTu K 22,45 5/80 ArTu K 7,52 5/73 FR4600 ArTu K 10,5 5/77 IP3180 ArTu K 0,7 5/59 KL1102 FR4601 ArTu K 10,5 5/70 IP3182 ArTu K 0,7 5/59 KL2103 ArTu K 5,1 5/68 FR4800 ArTu K 11,5 5/77 IP3200 ArTu K 0,78 5/59 KL2104 ArTu K 7,2 5/73 FR4801 ArTu K 11,5 5/70 IP3202 ArTu K 0,7 5/59 KL3103 ArTu K 7,1 5/68 FR6600 ArTu K 16 5/77 IP4140 ArTu K 0,9 5/60 KL3104 ArTu K 7,2 5/73 FR6800 ArTu K 17,5 5/77 IP4141 ArTu K 1,28 5/60 KL3113 ArTu K 4,95 5/68 GD4002 ArTu K 5/97 IP4160 ArTu K 1,35 5/60 KL3114 ArTu K 7,76 5/73 ArTu K 10,04 5/75 GD6002 ArTu K 5/97 IP4161 ArTu K 2,44 5/60 KL3212 5/97 IP4180 ArTu K 1,8 5/60 KL3613 ArTu K 4,594 5/68 5/85 IP4181 ArTu K 3,22 5/60 KL4115 ArTu K 6,55 5/68 GD8002 ArTu K FV3456 ArTu K 6,85 FV3458 ArTu K 7,94 5/85 KE2215 ArTu K 13 5/83 KL4116 ArTu K 3,93 5/68 FV3556 ArTu K 10 5/85 KE2235 ArTu K 18 5/83 KL4118 ArTu K 10,44 5/75 8/14 1STC008001D0904 | ABB Technical catalogue Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page KL5101 ArTu K 6,32 5/73 KO2261 ArTu K 6,31 5/77 KT3211 ArTu K 7,53 5/74 KL5102 ArTu K 15,42 5/69 KO2280 ArTu K 8,18 5/70 KT3212 ArTu K 5,6 5/69 KL5103 ArTu K 15,42 5/75 KO2280 ArTu K 8,18 5/77 KT3221 ArTu K 7,53 5/74 KL5114 ArTu K 9,22 5/68 KO2281 ArTu K 8,18 5/70 KT3401 ArTu K 3,6 5/71 KL5115 ArTu K 10,25 5/73 KO2281 ArTu K 8,18 5/77 KT3410 ArTu K 4 5/80 KL5116 ArTu K 5,9 5/68 KO3660 ArTu K 8,23 5/77 KT3416 ArTu K 5,02 5/74 KL5117 ArTu K 13,25 5/75 KO3680 ArTu K 10,83 5/77 KT3419 ArTu K 3,6 5/71 KL5212 ArTu K 12,25 5/69 KT1100 ArTu K 3,89 5/80 KT3420 ArTu K 4 5/80 KL5213 ArTu K 12,25 5/75 KT1101 ArTu K 5,64 5/71 KT3421 ArTu K 3,88 5/71 KL5214 ArTu K 11,65 5/75 KT1102 ArTu K 4 5/68 KT3426 ArTu K 5,02 5/74 KL6113 ArTu K 12,71 5/68 KT1110 ArTu K 3,89 5/80 KT4101 ArTu K 3,16 5/71 KL6124 ArTu K 12,71 5/75 KT1111 ArTu K 3,89 5/71 KT4102 ArTu K 11,56 5/69 KL6213 ArTu K 12,71 5/69 KT1112 ArTu K 5,97 5/71 KT4103 ArTu K 11,16 5/74 KL6214 ArTu K 12,71 5/75 KT1117 ArTu K 3,89 5/68 KT4110 ArTu K 2,95 5/68 KL7112 ArTu K 9,38 5/73 KT1401 ArTu K 3,76 5/71 KT4111 ArTu K 5,5 5/71 KL7212 ArTu K 12,31 5/75 KT1410 ArTu K 2,59 5/80 KT4112 ArTu K 2,8 5/68 KL7212 ArTu K 12,31 5/76 KT1411 ArTu K 3,6 5/71 KT4113 ArTu K 3,16 5/80 KL7213 ArTu K 10,58 5/75 KT2101 ArTu K 5,4 5/71 KT4116 ArTu K 7,83 5/74 KL7213 ArTu K 10,58 5/76 KT2102 ArTu K 4 5/68 KT4120 ArTu K 1,87 5/80 KN1146 ArTu K 5/76 KT2110 ArTu K 3,9 5/80 KT4121 ArTu K 11,37 5/82 KN1156 ArTu K 5/76 KT2111 ArTu K 3,89 5/71 KT4122 ArTu K 2,95 5/71 KN1348 ArTu K 5/76 KT2112 ArTu K 3,2 5/71 KT4124 ArTu K 2,35 5/80 KN1356 ArTu K 5/76 KT2117 ArTu K 3,89 5/68 KT4125 ArTu K 6,33 5/71 KN1456 ArTu K 5/83 KT2120 ArTu K 3,9 5/80 KT4126 ArTu K 8,44 5/74 KN1556 ArTu K 5/76 KT2121 ArTu K 3,89 5/71 KT4127 ArTu K 6,33 5/71 KN1558 ArTu K 5/76 KT2210 ArTu K 3,89 5/80 KT4128 ArTu K 8,44 5/82 KN1758 ArTu K 5/76 KT2401 ArTu K 3,6 5/71 KT4129 ArTu K 9,5 5/82 KN1856 ArTu K 5/83 KT2410 ArTu K 2,8 5/80 KT4130 ArTu K 4,74 5/80 KN2066 ArTu K 5/83 KT2411 ArTu K 3,6 5/71 KT4211 ArTu K 8,7 5/74 KN2566 ArTu K 5/76 KT2420 ArTu K 2,7 5/80 KT4212 ArTu K 9,25 5/69 KN2666 ArTu K 5/83 KT2421 ArTu K 3,74 5/71 KT4221 ArTu K 8,44 5/74 KN2766 ArTu K 5/76 KT3101 ArTu K 5,4 5/71 KT4222 ArTu K 11,2 5/82 KN4168 ArTu K 5/76 KT3102 ArTu K 5,6 5/68 KT4231 ArTu K 8,44 5/74 KN4268 ArTu K 5/83 KT3110 ArTu K 5,6 5/80 KT4310 ArTu K 9,84 5/80 KN4768 ArTu K 5/76 KT3112 ArTu K 3,9 5/68 KT4320 ArTu K 14,77 5/80 KN4868 ArTu K 5/83 KT3114 ArTu K 5 5/71 KT4411 ArTu K 2,95 5/71 KN6061 ArTu K 5/83 KT3115 ArTu K 5,6 5/80 KT4412 ArTu K 4,66 5/74 KN6161 ArTu K 5/76 KT3116 ArTu K 4,5 5/71 KT5101 ArTu K 4,74 5/72 KN6361 ArTu K 5/76 KT3119 ArTu K 3,89 5/71 KT5102 ArTu K 11,42 5/69 5/74 Code KN6461 ArTu K 5/83 KT3120 ArTu K 5,6 5/80 KT5103 ArTu K 10,55 KO1250 ArTu K 20,5 5/76 KT3121 ArTu K 5,82 5/71 KT5110 ArTu K 4,43 5/68 KO2260 ArTu K 6,31 5/70 KT3124 ArTu K 5,6 5/80 KT5111 ArTu K 6,45 5/72 KO2260 ArTu K 6,31 5/77 KT3131 ArTu K 11,41 5/71 KT5112 ArTu K 5,8 5/68 KO2261 ArTu K 6,31 5/70 KT3132 ArTu K 10,57 5/80 KT5117 ArTu K 9,85 5/74 ABB Technical catalogue | 1STC008001D0904 8 8/15 ArTu K structures Order codes 8 Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page KT5120 ArTu K 4,74 5/72 KT6119 ArTu K 15,25 5/72 KX1607 ArTu K 4,728 5/72 KT5121 ArTu K 4,74 5/72 KT6120 ArTu K 9,53 5/75 KX1608 ArTu K 12,05 5/72 KT5122 ArTu K 2,68 5/80 KT6121 ArTu K 9,53 5/75 KX1609 ArTu K 4,75 5/72 KT5123 ArTu K 11,25 5/82 KT6122 ArTu K 9,53 5/75 KX1611 ArTu K 4,728 5/72 KT5124 ArTu K 8,44 5/82 KT6123 ArTu K 9,53 5/75 KX1617 ArTu K 3,663 5/68 KT5125 ArTu K 7,58 5/82 KT6130 ArTu K 9,53 5/81 KX1618 ArTu K 5,64 5/69 KT5126 ArTu K 5,63 5/82 KT6131 ArTu K 9,53 5/72 KX1621 ArTu K 4,728 5/72 KT5128 ArTu K 10,25 5/82 KT6132 ArTu K 9,53 5/82 KX1622 ArTu K 7,95 5/72 KT5129 ArTu K 8,44 5/82 KT6133 ArTu K 9,53 5/82 KX1801 ArTu K 7,52 5/73 KT5130 ArTu K 4,92 5/72 KT6134 ArTu K 9,53 5/81 KX2411 ArTu K 3,6 5/71 KT5131 ArTu K 4,92 5/72 KT6141 ArTu K 9,53 5/82 KX2412 ArTu K 6,25 5/75 KT5134 ArTu K 6,33 5/72 KT6142 ArTu K 15,25 5/81 KX2601 ArTu K 3,985 5/72 KT5135 ArTu K 6,33 5/72 KT6143 ArTu K 15,25 5/81 KX2602 ArTu K 3,539 5/68 KT5136 ArTu K 5,89 5/80 KT6144 ArTu K 15,25 5/81 KX2604 ArTu K 4,25 5/69 KT5137 ArTu K 9,5 5/82 KT6145 ArTu K 15,25 5/81 KX2605 ArTu K 3,2 5/73 KT5138 ArTu K 8,44 5/74 KT6210 ArTu K 9,53 5/82 KX2607 ArTu K 4,728 5/73 KT5139 ArTu K 10,55 5/74 KT6211 ArTu K 9,53 5/74 KX2608 ArTu K 12,05 5/73 KT5211 ArTu K 9,5 5/74 KT6213 ArTu K 9,53 5/69 KX2611 ArTu K 4,532 5/72 KT5212 ArTu K 8,25 5/69 KT6220 ArTu K 9,53 5/81 KX2612 ArTu K 4,25 5/75 KT5214 ArTu K 9,85 5/74 KT6221 ArTu K 9,53 5/81 KX2619 ArTu K 3,592 5/68 KT5221 ArTu K 10,55 5/74 KT6230 ArTu K 9,53 5/82 KX2621 ArTu K 4,142 5/72 KT5222 ArTu K 8,44 5/74 KT7110 ArTu K 5,78 5/71 KX2622 ArTu K 7,85 5/73 KT5223 ArTu K 11,25 5/82 KT7111 ArTu K 8,1 5/72 KX2631 ArTu K 4,728 5/72 KT5231 ArTu K 10,55 5/74 KT7115 ArTu K 10,41 5/81 KX2632 ArTu K 4,85 5/73 KT5232 ArTu K 8,44 5/74 KT7211 ArTu K 10,91 5/75 KX2634 ArTu K 5,25 5/73 KT5310 ArTu K 14,77 5/80 KT7211 ArTu K 10,91 5/76 KX2801 ArTu K 7,2 5/73 KT5320 ArTu K 14,77 5/81 KT7215 ArTu K 11,645 5/82 KX3131 ArTu K 11,41 5/73 KT5321 ArTu K 14,77 5/81 KT7215 ArTu K 11,645 5/83 KX3132 ArTu K 5,64 5/73 KT5401 ArTu K 7,71 5/74 KT7230 ArTu K 20,92 5/82 KX3411 ArTu K 3,6 5/71 KT5411 ArTu K 2,65 5/71 KT7230 ArTu K 20,92 5/83 KX3412 ArTu K 5,02 5/74 KT5412 ArTu K 3,66 5/74 KT7231 ArTu K 8,98 5/75 KX3601 ArTu K 5,4 5/73 KT5420 ArTu K 4,89 5/80 KT7231 ArTu K 8,98 5/76 KX3602 ArTu K 5,6 5/68 KT5421 ArTu K 4,58 5/80 KT7560 ArTu K 8,44 5/72 KX3603 ArTu K 7,1 5/68 KT5430 ArTu K 4,92 5/80 KT7561 ArTu K 8,98 5/81 KX3605 ArTu K 5 5/73 KT5431 ArTu K 4,92 5/80 KT8210 ArTu K 22,321 5/82 KX3607 ArTu K 4,728 5/73 KT6110 ArTu K 9,53 5/81 KT8211 ArTu K 20,214 5/75 KX3609 ArTu K 5,64 5/69 KT6111 ArTu K 9,53 5/72 KX1131 ArTu K 5,64 5/73 KX3611 ArTu K 4,679 5/73 KT6112 ArTu K 10,25 5/72 KX1132 ArTu K 5,64 5/73 KX3612 ArTu K 3,596 5/68 KT6113 ArTu K 9,53 5/68 KX1401 ArTu K 2,95 5/71 KX3613 ArTu K 4,95 5/75 KT6114 ArTu K 10,65 5/72 KX1419 ArTu K 3,6 5/71 KX3614 ArTu K 5,6 5/69 KT6115 ArTu K 9,53 5/72 KX1602 ArTu K 3,702 5/68 KX3621 ArTu K 5,82 5/73 KT6116 ArTu K 15,25 5/72 KX1603 ArTu K 5,64 5/69 KX3801 ArTu K 7,2 5/73 KT6117 ArTu K 15,25 5/72 KX1604 ArTu K 5,64 5/69 KX3811 ArTu K 6,065 5/73 KT6118 ArTu K 15,25 5/72 KX1605 ArTu K 4,982 5/72 KX3812 ArTu K 10,04 5/75 8/16 1STC008001D0904 | ABB Technical catalogue Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page KX4141 ArTu K 12,65 5/73 KY3621 ArTu K 5,6 5/81 PB1603 ArTu K 1,11 5/88 KX4142 ArTu K 5,64 5/73 KY4141 ArTu K 22,45 5/81 PB3201 ArTu K 1,11 5/88 KX4411 ArTu K 2,95 5/71 KY4411 ArTu K 1,87 5/80 PC1210 ArTu K 1,96 5/67 KX4412 ArTu K 4,66 5/74 KY4412 ArTu K 9,5 5/82 PC1220 ArTu K 3,62 5/67 KX4601 ArTu K 3,16 5/73 KY4601 ArTu K 3,5 5/81 PC1230 ArTu K 5,29 5/67 KX4602 ArTu K 11,56 5/69 KY4604 ArTu K 9,84 5/81 PC1240 ArTu K 6,96 5/67 KX4603 ArTu K 11,16 5/75 KY4607 ArTu K 3,6 5/81 PC1250 ArTu K 8,63 5/67 KX4604 ArTu K 5,45 5/69 KY4611 ArTu K 2,35 5/81 PC1260 ArTu K 10,3 5/67 KX4606 ArTu K 3,75 5/73 KY4612 ArTu K 11,37 5/82 PC1400 ArTu K 0,64 5/67 KX4607 ArTu K 4,728 5/73 KY4621 ArTu K 3,734 5/81 PC1600 ArTu K 0,96 5/67 KX4610 ArTu K 2,95 5/68 KY4631 ArTu K 5,598 5/81 PC1660 ArTu K 13,5 5/67 KX4611 ArTu K 4,637 5/73 LA1810 ArTu K 52,5 5/55 PC1680 ArTu K 18,3 5/67 KX4612 ArTu K 3,539 5/68 LA1860 ArTu K 31 5/55 PC1800 ArTu K 1,27 5/67 KX4614 ArTu K 4,899 5/69 LA1880 ArTu K 42 5/55 PC1840 ArTu K 10 5/67 KX4615 ArTu K 6,55 5/68 LA2010 ArTu K 52 5/55 PC1860 ArTu K 15 5/67 KX4616 ArTu K 7,83 5/75 LA2060 ArTu K 44 5/55 PC1880 ArTu K 20,25 5/67 KX4617 ArTu K 5,918 5/75 LA2080 ArTu K 47 5/55 PC2040 ArTu K 11,5 5/67 KX4622 ArTu K 4,625 5/73 LF1626 ArTu K 12,1 5/55 PC2060 ArTu K 16,875 5/67 KX4627 ArTu K 6,33 5/73 LF1810 ArTu K 52 5/55 PC2080 ArTu K 22,57 5/67 KX4632 ArTu K 5,55 5/73 LF1826 ArTu K 13,5 5/55 PC2400 ArTu K 1,27 5/67 KX4633 ArTu K 5,45 5/73 LF1840 ArTu K 19 5/55 PC2600 ArTu K 1,4 5/67 KX4818 ArTu K 10,44 5/75 LF1850 ArTu K 22,3 5/55 PC2800 ArTu K 2,6 5/67 KY1131 ArTu K 8,293 5/81 LF1860 ArTu K 25 5/55 PC3400 ArTu K 1,57 5/67 KY1411 ArTu K 2,531 5/80 LF1880 ArTu K 44 5/55 PC3600 ArTu K 1,96 5/67 KY1601 ArTu K 3,89 5/81 LF2010 ArTu K 55 5/55 PC3800 ArTu K 3,23 5/67 KY1605 ArTu K 3,75 5/81 LF2026 ArTu K 15 5/55 PC4400 ArTu K 2,06 5/67 KY1607 ArTu K 3,89 5/81 LF2040 ArTu K 19,5 5/55 PC4600 ArTu K 2,45 5/67 KY1611 ArTu K 3,89 5/81 LF2050 ArTu K 24,78 5/55 PC4800 ArTu K 4,41 5/67 KY1621 ArTu K 3,89 5/81 LF2060 ArTu K 35 5/55 PC6400 ArTu K 3,43 5/67 KY2411 ArTu K 2,8 5/80 LF2080 ArTu K 47 5/55 PC6600 ArTu K 4,41 5/67 KY2421 ArTu K 2,7 5/80 LI1840 ArTu K 23 5/57 PC6800 ArTu K 6,37 5/67 KY2601 ArTu K 3,5 5/81 LI1860 ArTu K 28 5/57 PC8600 ArTu K 5,39 5/67 KY2605 ArTu K 3,89 5/81 LI1880 ArTu K 33 5/57 PC8800 ArTu K 8,58 5/67 KY2607 ArTu K 3,89 5/81 LI2040 ArTu K 26 5/57 PF1806 ArTu K 25 5/78 KY2611 ArTu K 3,581 5/81 LI2060 ArTu K 30 5/57 PF1808 ArTu K 32 5/78 KY2621 ArTu K 3,755 5/81 LI2080 ArTu K 35 5/57 PF2005 ArTu K 2,5 5/79 KY2631 ArTu K 5,6 5/81 PA1010 ArTu K 1,913 5/67 PF2006 ArTu K 35,5 5/78 KY3131 ArTu K 10,57 5/81 PA1600 ArTu K 2,6 5/67 PF2008 ArTu K 36 5/78 KY3411 ArTu K 4 5/80 PA2010 ArTu K 3,826 5/67 PF2090 ArTu K 4,166 5/79 KY3421 ArTu K 4 5/80 PA2600 ArTu K 2,94 5/67 PF2100 ArTu K 5,166 5/77 KY3601 ArTu K 5,5 5/81 PB0802 ArTu K 0,66 5/88 PF2401 ArTu K 1,8 5/77 KY3605 ArTu K 5,6 5/81 PB0803 ArTu K 0,4 5/88 PF2405 ArTu K 1,8 5/79 KY3607 ArTu K 3,89 5/81 PB1600 ArTu K 1,55 5/88 PF2601 ArTu K 2,5 5/77 KY3611 ArTu K 3,619 5/81 PB1601 ArTu K 1,12 5/88 PF2610 ArTu K 2,5 5/70 ABB Technical catalogue | 1STC008001D0904 8 8/17 ArTu K structures Order codes 8 Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page PF2801 ArTu K 3,6 5/77 PO1833 ArTu K 13 5/62 RF1680 PF2805 ArTu K 3,2 5/79 PO1841 ArTu K 15,2 5/56 RF1810 ArTu K 23,2 5/58 ArTu K 25 PF2810 ArTu K 3,6 5/70 PO1861 ArTu K 20,5 5/56 5/58 RF1830 ArTu K 10,5 PF3005 ArTu K 4,6 5/79 PO1881 ArTu K 24 5/62 5/56 RF1840 ArTu K 15,5 PF3090 ArTu K 6,151 5/79 PO2011 ArTu K 5/58 24,5 5/56 RF1860 ArTu K 20,5 PF3100 ArTu K 7,151 5/77 PO2031 5/58 ArTu K 9 5/62 RF1880 ArTu K 24 PF3403 ArTu K 2,6 5/77 5/58 PO2033 ArTu K 9 5/62 RF2010 ArTu K 28,82 5/58 PF3405 ArTu K 2,9 PF3601 ArTu K 4,6 5/79 PO2041 ArTu K 16,2 5/56 RF2030 ArTu K 11,5 5/62 5/77 PO2061 ArTu K 22 5/56 RF2040 ArTu K 16,8 PF3801 ArTu K 5/58 6 5/77 PO2081 ArTu K 28 5/56 RF2060 ArTu K 20,66 PF3805 5/58 ArTu K 4,6 5/79 PR2600 ArTu K 1,96 5/67 RF2080 ArTu K 26,56 5/58 PF4005 ArTu K 5,6 5/79 PR2800 ArTu K 2,74 5/67 SA1350 ArTu K 2,2 5/98 PF4090 ArTu K 8,135 5/79 PR4600 ArTu K 3,92 5/67 SH1030 ArTu K 2,94 5/86 PF4100 ArTu K 9,135 5/77 PR4800 ArTu K 4,12 5/67 SH1090 ArTu K 3,785 5/86 PF4401 ArTu K 4,1 5/77 PR6600 ArTu K 5,39 5/67 SH1100 ArTu K 2,108 5/86 PF4405 ArTu K 3,6 5/79 PR6800 ArTu K 6,86 5/67 SH2030 ArTu K 2,45 5/86 PF4601 ArTu K 5,6 5/77 PS2017 ArTu K 3,826 5/65 SH4000 ArTu K 2 5/86 PF4610 ArTu K 4,5 5/70 PS2019 ArTu K 3,826 5/65 SH4030 ArTu K 3,3 5/86 PF4801 ArTu K 9 5/77 PS2720 ArTu K 1,27 5/65 SH4031 ArTu K 3,15 5/87 PF4805 ArTu K 6,2 5/79 PS2728 ArTu K 2,45 5/65 SH4033 ArTu K 5,31 5/87 PF4810 ArTu K 7,5 5/70 PS2960 ArTu K 1,27 5/65 SH4034 ArTu K 6,49 5/87 PF6005 ArTu K 8,25 5/79 PS2968 ArTu K 2,45 5/65 SH4035 ArTu K 9,23 5/87 PF6090 ArTu K 12,103 5/79 PS4720 ArTu K 1,27 5/65 SH6000 ArTu K 1,265 5/86 PF6100 ArTu K 13,103 5/77 PS4728 ArTu K 2,45 5/65 SH8000 ArTu K 1,9 5/86 PF6401 ArTu K 7 5/77 PS4960 ArTu K 1,3 5/65 SH8570 ArTu K 2,984 5/86 PF6405 ArTu K 5,9 5/79 PS4968 ArTu K 2,5 5/65 SK1010 ArTu K 64,5 5/53 PF6601 ArTu K 9,5 5/77 PV1661 ArTu K 18,6 5/56 SK1100 ArTu K 64,5 5/54 PF6801 ArTu K 11 5/77 PV1681 ArTu K 23,6 5/56 SK1600 ArTu K 16,72 5/53 PF6805 ArTu K 9,1 5/79 PV1682 ArTu K 23,6 5/56 SK1604 ArTu K 6,75 5/54 PF8005 ArTu K 12,5 5/79 PV1811 ArTu K 30,85 5/56 SK1800 ArTu K 19 5/53 PF8805 ArTu K 12,4 5/79 PV1812 ArTu K 25,098 5/56 SK1802 ArTu K 15,19 5/55 PM2010 ArTu K 3,826 5/64 PV1841 ArTu K 14,3 5/56 SK1803 ArTu K 9,5 5/54 PM2312 ArTu K 2,93 5/64 PV1861 ArTu K 19,5 5/56 SK1804 ArTu K 8 5/54 PM2315 ArTu K 3,9 5/64 PV1863 ArTu K 24,2 5/57 SK1815 ArTu K 19,42 5/54 PM2424 ArTu K 1,67 5/64 PV1881 ArTu K 24,2 5/56 SK1880 ArTu K 4,5 5/61 PM2624 ArTu K 1,2 5/64 PV1882 ArTu K 35 5/56 SK1881 ArTu K 3,97 5/84 PM2624 ArTu K 1,2 5/97 PV1883 ArTu K 28,2 5/57 SK2000 ArTu K 20,8 5/53 PM2836 ArTu K 2 5/64 PV2011 ArTu K 41,13 5/56 SK2003 ArTu K 10 5/54 PM2836 ArTu K 2 5/97 PV2012 ArTu K 24,5 5/56 SK2002 ArTu K 10 5/55 PM3424 ArTu K 1,41 5/64 PV2041 ArTu K 15,8 5/56 SK2004 ArTu K 9,5 5/54 PM3624 ArTu K 2,87 5/64 PV2061 ArTu K 21,5 5/56 SK2015 ArTu K 21,7 5/54 PM3624 ArTu K 2,87 5/96 PV2063 ArTu K 28,2 5/57 SK2080 ArTu K 5,2 5/61 PM3648 ArTu K 2,87 5/64 PV2081 ArTu K 30,45 5/56 SK2081 ArTu K 8,6 5/84 PM3836 ArTu K 3,82 5/64 PV2082 ArTu K 32 5/56 SK4010 ArTu K 35 5/53 PM3836 ArTu K 3,82 5/96 PV2083 ArTu K 32 5/57 SK4040 ArTu K 20,5 5/53 PM3872 ArTu K 3,82 5/64 RA1810 ArTu K 25 5/58 SK4050 ArTu K 28,85 5/53 PM6672 ArTu K 4,41 5/64 RA1860 ArTu K 20,5 5/58 SK4060 ArTu K 30,3 5/53 PO1631 ArTu K 12 5/62 RA1880 ArTu K 24 5/58 SK4080 ArTu K 36 5/53 PO1633 ArTu K 14,6 5/62 RA2010 ArTu K 28,82 5/58 SK6010 ArTu K 52,5 5/53 PO1661 ArTu K 18,63 5/56 RA2060 ArTu K 20,66 5/58 SK6025 ArTu K 23,8 5/53 PO1681 ArTu K 23,6 5/56 RA2080 ArTu K 26,56 5/58 SK6040 ArTu K 30,3 5/53 PO1811 ArTu K 25,098 5/56 RF1630 ArTu K 10,8 5/62 SK6050 ArTu K 36,54 5/53 PO1831 ArTu K 8 5/62 RF1660 ArTu K 18,2 5/58 SK6060 ArTu K 41,6 5/53 8/18 1STC008001D0904 | ABB Technical catalogue Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page SK6080 ArTu K 46,5 5/53 TR8301 ArTu K 0,49 5/93 TV2635 ArTu K SK6600 ArTu K 41,6 5/54 TR8400 ArTu K 0,5 5/102 TV8221 ArTu K 1,39 5/91 SK8010 ArTu K 54,9 5/53 TR8500 ArTu K 0,45 5/102 VB7035 SK8025 ArTu K 28,28 5/53 TR8600 ArTu K 0,5 5/102 VC1624 ArTu K 0,6 5/107 ArTu K 17,5 SK8040 ArTu K 36 5/53 TR8800 ArTu K 0,5 5/102 VC1820 5/61 ArTu K 28,5 SK8050 ArTu K 44,84 5/53 TR8900 ArTu K 0,62 5/102 5/61 VC1823 ArTu K 26 SK8060 ArTu K 49,5 5/53 TS4000 ArTu K 2 5/61 5/104 VC1824 ArTu K 19,5 SK8080 ArTu K 57,5 5/53 TS4001 ArTu K 5/61 2,5 5/104 VC2020 ArTu K 31,5 SK8800 ArTu K 57,5 5/54 TS4002 5/61 ArTu K 2 5/104 VC2023 ArTu K 30 SV1815 ArTu K 14,63 5/87 5/61 TS4003 ArTu K 2 5/104 VC2024 ArTu K 22,9 SV1860 ArTu K 7,2 5/61 5/87 TS4011 ArTu K 2 5/104 VC3010 ArTu K 34,25 SV1880 ArTu K 5/62 11,5 5/87 TS4012 ArTu K 2 5/104 VC3025 ArTu K 19,25 SV2010 5/62 ArTu K 2,608 5/86 TS4013 ArTu K 2 5/104 VC3040 ArTu K 24,5 5/62 SV2011 ArTu K 1,587 5/87 TV1001 ArTu K 1,53 5/90 VC3050 ArTu K 26,55 5/62 SV2015 ArTu K 16,25 5/87 TV1001 ArTu K 1,53 5/93 VC3060 ArTu K 28 5/62 SV2061 ArTu K 1,76 5/86 TV1005 ArTu K 2,84 5/90 VC3080 ArTu K 29,5 5/62 SV2064 ArTu K 3,13 5/87 TV1005 ArTu K 2,84 5/93 ZD1015 ArTu K 1,3 5/53 SV2080 ArTu K 1,26 5/87 TV1011 ArTu K 1,78 5/91 ZD1025 ArTu K 1,72 5/53 SV2081 ArTu K 2,087 5/86 TV1101 ArTu K 1,32 5/90 ZD1030 ArTu K 2,19 5/53 SV2265 ArTu K 7,84 5/87 TV1101 ArTu K 1,32 5/93 ZD1050 ArTu K 3,38 5/53 SV2285 ArTu K 12,74 5/87 TV1261 ArTu K 2,89 5/91 ZD1070 ArTu K 4,57 5/53 SV3010 ArTu K 3,912 5/86 TV1261 ArTu K 2,89 5/94 ZD1090 ArTu K 5,75 5/53 SV3060 ArTu K 2,348 5/86 TV1311 ArTu K 11,5 5/94 ZD2324 ArTu K 3,8 5/99 SV3080 ArTu K 3,129 5/86 TV3000 ArTu K 0,98 5/90 ZD2340 ArTu K 3,8 5/99 SV4010 ArTu K 5,216 5/86 TV3101 ArTu K 0,5 5/90 ZD2350 ArTu K 6,14 5/99 SV4011 ArTu K 3,587 5/87 TV3201 ArTu K 0,62 5/90 ZD2361 ArTu K 4,2 5/99 SV4061 ArTu K 2,35 5/86 TV4000 ArTu K 0,98 5/90 ZD2381 ArTu K 4,5 5/99 SV4080 ArTu K 10,1 5/87 TV4001 ArTu K 0,98 5/90 ZD2440 ArTu K 6,7 5/99 SV4081 ArTu K 4,173 5/86 TV4221 ArTu K 0,98 5/91 ZD2450 ArTu K 6,97 5/99 TR1201 ArTu K 3,06 5/94 TV5101 ArTu K 1,18 5/90 ZD2460 ArTu K 8,1 5/99 TR1205 ArTu K 3,45 5/94 TV5101 ArTu K 1,18 5/102 ZD2480 ArTu K 11,5 5/99 TR4101 ArTu K 0,49 5/102 TV6001 ArTu K 0,45 5/90 ZD2624 ArTu K 11,4 5/99 TR6001 ArTu K 0,78 5/93 TV6005 ArTu K 0,49 5/90 ZD2640 ArTu K 9,2 5/99 TR6001 ArTu K 0,78 5/102 TV6011 ArTu K 0,73 5/91 ZD2650 ArTu K 10,56 5/99 TR6005 ArTu K 0,39 5/93 TV6101 ArTu K 0,83 5/90 ZD2660 ArTu K 11 5/99 TR6005 ArTu K 0,39 5/102 TV6201 ArTu K 0,93 5/90 ZD2680 ArTu K 12,61 5/99 TR6101 ArTu K 0,39 5/93 TV6202 ArTu K 1,96 5/90 ZD2824 ArTu K 15,2 5/99 TR6101 ArTu K 0,39 5/102 TV6203 ArTu K 0,43 5/91 ZD2840 ArTu K 10,9 5/99 TR6201 ArTu K 0,39 5/94 TV6221 ArTu K 1,08 5/91 ZD2850 ArTu K 12,75 5/99 TR6205 ArTu K 0,49 5/94 TV8001 ArTu K 0,74 5/90 ZD2860 ArTu K 13 5/99 TR6301 ArTu K 0,49 5/93 TV8005 ArTu K 0,78 5/90 ZD2880 ArTu K 17,33 5/99 TR7005 ArTu K 1,18 5/93 TV8011 ArTu K 1,08 5/91 ZD4010 ArTu K 14,38 5/99 TR7005 ArTu K 1,18 5/102 TV8101 ArTu K 1,13 5/90 ZD6010 ArTu K 15,87 5/99 TR8000 ArTu K 0,98 5/93 TV8201 ArTu K 1,22 5/90 ZD8010 ArTu K 17,52 5/99 TR8000 ArTu K 0,98 5/102 TV8202 ArTu K 2,61 5/90 ZK1100 ArTu K 8,351 5/100 TR8001 ArTu K 0,98 5/93 TV8203 ArTu K 0,58 5/91 ZR3000 ArTu K 12,87 5/100 TR8001 ArTu K 0,98 5/102 TV1211 ArTu K 3,4 5/91 ZR4000 ArTu K 15,7 5/100 TR8005 ArTu K 0,49 5/93 TV1211 ArTu K 3,4 5/94 ZR6000 ArTu K 15,6 5/100 TR8005 ArTu K 0,49 5/102 TV2630 ArTu K 5/93 ZR8000 ArTu K 20 5/100 TR8101 ArTu K 0,49 5/93 TV2631 ArTu K 5/93 TR8101 ArTu K 0,49 5/102 TV2632 ArTu K 5/93 TR8201 ArTu K 0,49 5/94 TV2633 ArTu K 5/94 TR8205 ArTu K 0,78 5/94 TV2634 ArTu K 5/94 5/94 ABB Technical catalogue | 1STC008001D0904 8 8/19 Notes Notes Notes Notes ABB SACE A division of ABB S.p.A. Automation and Distribution Boards Via Italia, 58 23846 Garbagnate Monastero (LC) - Italy Tel: +39 031 3570.111 Fax: +39 031 3570.228 www.abb.com/lowvoltage The data and illustrations are not binding. We reserve the right to modify the contents of this document on the basis of technical development of the products, without prior notice. Copyright 2014 ABB. All right reserved. 1STC008001D0204 - 06.2014 - 6.000 Contact us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Create Date : 2014:12:10 16:48:18+01:00 Modify Date : 2014:12:10 16:50:39+01:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : untitled Metadata Date : 2014:12:10 16:50:39+01:00 Producer : Acrobat Distiller 10.1.10 (Macintosh) Document ID : uuid:60d9d52e-1ea3-9844-a720-4e09444d4d67 Instance ID : uuid:9ce7917f-6cb2-8b4b-9862-795fe5ee6ee3 Page Layout : TwoColumnRight Page Count : 404EXIF Metadata provided by EXIF.tools