Product Detail Manual

139397-Attachment 139397-Attachment 139397-Attachment B5 unilog cesco-content

149548-Brochure 149548-Brochure 149548-Brochure B5 unilog cesco-content

: Pdf 1000424139-Attachment 1000424139-Attachment B2 unilog

Open the PDF directly: View PDF .
Page Count: 4

Wiremold® WallSource Multiple Service Boxes provide

power and communications connectivity through a

single access point in the wall.

Keeping up with technology advancements is a

breeze! By using 5507 Series Faceplates, WallSource

Multiple Service Boxes can accommodate a wide range

of power, communication, and A/V solutions.

WallSource Boxes quickly mount in walls with

standard 16" [406mm] on center studs. Adjustable

mounting brackets offer the flexibility to flush mount

WallSource Boxes within multiple wall thicknesses.

Knockouts located in both the top and bottom of

WallSource Boxes provide easy access for a variety

of power, communication, and A/V services. Easy-to-

install slide-in dividers provide separation for power and

communication or A/V wiring.

WIREMOLD®

WallSource™ Multiple Service Boxes

ED864R14 – Updated March 2014 – For latest specs visit www.legrand.us/wiremold

A single box for multiple services

WallSource box shown with an angled raceway adapter.

FEATURES & BENEFITS

n Adjustable mounting brackets. Allow WallSource Boxes

to be flush mounted in 1/2", 5/8", 1" and 1 1/4" [12.7mm,

15.9mm, 25mm and 32mm] wall thicknesses. Provide a

flush, clean installation every time.

n Color options. Device mounting brackets and trim rings

are available in white, ivory, black, gray, and light gray to

match any decor.

n Dividers. Field installed barriers provide shielding to allow

communications and power within a single in-wall box.

n Knockouts. 1/2", 3/4", 1", and 1 1/2" trade size openings

located in both the top and bottom of WallSource Boxes

provide multiple service flexibility.

n System flexibility. Using the WSA86 Backfeed Kit with the

WSA42-4 WallSource Box provides service access for

wall-mounted divided raceway systems.

n 5507 Series faceplate compatible. These aesthetically-

pleasing faceplates accept a wide range of power,

communication, and A/V solutions

n Compatible with A/V devices by using 5507 Series

Faceplates.

n Increased productivity. Housing power, communication,

and A/V services within one aesthetically-pleasing in-wall

box eliminates the need for multiple drops and saves

installation time.

n Concealed fiber storage spool. Holds 18" [457mm] of

excess cabling for future expansion.

n Open architecture device mounting bracket. WSA00-4

Device Mounting Bracket accommodates a wide range of

industry standard electrical and communication devices

and faceplates (WSA42-4 Box only).

n Datacom connectivity options. Accepts industry

standard and proprietary devices from a wide range of

manufacturers to provide a seamless and aesthetically

pleasing interface for voice, data, audio, and video

applications at the point of use.

n j UL Listed File E2961.

INSTALLATION FLEXIBILITY:

For a flexible wiring system, install four-

gang WallSource box during construction

to house the wire and cabling to feed a

surface raceway system.

Catalog No./Item Description/Specifications

WSA07-4A Device Mounting Bracket

& Trim

WSA07-4AWH

Ring – Self-leveling

bracket

WSA07-4ABK accommodates a wide variety of

WSA07-4AG electrical and communications

WSA07-4AGY devices. The trim ring hides the

holecut to give the box a finished

look. For use with:

5507 Series

Faceplates,

Ortronics® TracJack &

Series II Modules, Pass & Seymour

Inserts and Wiremold Open System

Communication Modules.

WSC07-6A Device Mounting Bracket

& Trim

WSC07-6AWH

Ring – Self-leveling

bracket

WSC07-6ABK accommodates a wide variety of

WSC07-6AG electrical and communications

WSC07-6AGY devices. The trim ring hides the

holecut to give the box a finished

look. For use with:

5507 Series

Faceplates,

Ortronics® TracJack &

Series II Modules, Pass & Seymour

Inserts and Wiremold Open

System Communication Modules.

WSA86† Backfeed Kit – For backfeeding

large raceway systems: 4000, 6000,

5400, 5500, and ALA4800 Series

Raceways. Use the dividers for

UL Listed separation. The backfeed

plate completely covers the wall

holecut (only needed with 4000

and 6000 Series raceway). Includes

both ivory and gray trim pieces.

WSA00-4* Open Architecture Device

WSA00-4WH* Mounting Bracket – Self-leveling

WSA00-4BK* bracket accommodates a wide

WSA00-4G* variety of electrical and

WSA00-4GY* communications devices. This

bracket accommodates a standard

single- and dual-gang faceplate.

The trim ring hides the holecut and

gives the box a finished look.

FSS-18 Fiber Storage Loop – Use this

loop to store 18" [457mm] of

cable with a controlled 1"

[25mm] bend radius.

Catalog No./Item Description/Specifications

WSB42-2** WallSource Box, Dividers,

Mounting Brackets – Slide-in

dividers separate the box for power

and communication services.

Adjustable mounting brackets offer

flexibility to flush mount box in

1/2", 5/8", 1", and 1 1/4" [12.7mm,

15.9mm, 25mm, and 32mm]

wall thicknesses.

WSA42-4** WallSource Box, Dividers,

Mounting Brackets – Slide-in

dividers separate the box for power

and communication services.

Adjustable mounting brackets offer

flexibility to flush mount box in

1/2", 5/8", 1", and 1 1/4" [12.7mm,

15.9mm, 25mm, and 32mm]

wall thicknesses.

WSC42-6** WallSource Box, Dividers,

Mounting Brackets – Slide-in

dividers separate the box for power

and communication services.

Adjustable mounting brackets offer

flexibility to flush mount box in

1/2", 5/8", 1", and 1 1/4" [12.7mm,

15.9mm, 25mm, and 32mm]

wall thicknesses.

WSB07-2A Device Mounting Bracket

& Trim

WSB07-2AWH

Ring – Self-leveling

bracket

WSB07-2ABK accommodates a wide variety of

WSB07-2AG electrical and communications

WSB07-2AGY devices. The trim ring hides the

holecut to give the box a finished

look. For use with:

5507 Series

Faceplates,

Ortronics® TracJack &

Series II Modules, Pass & Seymour

Activate Series Inserts and

Wiremold Open System

Communication Modules.

NOTE: All faceplates have a standard measurement of

4 1/4" x 1 7/8" [108mm x 34mm].

* For use with WSA42-4 only.

** Add “C” suffix for Canadian version.

11 1/4"

[286mm]

7"

[178mm]

Cat. No. L W D Gang Trade Size KOs

WSC42-6 13 3/4"[350mm] 5"[127mm] 3 1/4"[83mm] 6 1/2, 3/4, 1, 1 1/2

Cat. No. L W Gang

WSB07-2A* 6 13/16"[173mm] 7"[177mm] 2

2 5/8"

[67mm]

1"

[25mm]

WallSource Multiple Service Box Ordering Information

Cat. No. L W D Gang Trade Size KOs

WSB42-2 4 3/4"[121mm] 5"[127mm] 3 1/4"[83mm] 2 1/2, 3/4, 1

Cat. No. L W D Gang Trade Size KOs

WSA42-4 9 3/16"[233mm] 5"[127mm] 3 1/4"[83mm] 4 1/2, 3/4, 1, 1 1/2

Cat. No. L W Gang

WSA07-4A* 11 1/4"[286mm] 7"[177mm] 4

Cat. No. L W Gang

WSC07-6A* 15 13/16"[402mm] 7"[177mm] 6

3

Catalog No./Item Description/Specifications

5507AD*

Modular Furniture Adapter –

Mounts Activate modular

furniture bezel and other

modular furniture adapters.

5507B*

Blank Faceplate – Covers

unused compartments in the

device bracket.

5507D*

Duplex Faceplate –

Covers duplex style devices.

Accepts 106 Frame.

5507R*

Rectangular Faceplate –

Covers rectangular

style devices.

5507S*

Rectangular Spacer – For

mounting commercial device

plates. Installs between the

device bracket and a device.

5507SW*

Switch Faceplate – Covers

standard toggle switches.

5507T1*

Single Receptacle

Faceplate – Covers single

receptacles – 1.59"

[40mm] diameter.

5507T2*

Single Receptacle

Faceplate – Covers single

receptacles – 1.41"

[36mm] diameter.

5507RJ*

Dual RJ11/RJ45 Connector

Faceplate – Mounts one or two

RJ keystone type connectors –

has one opening and a KO for

the other.

5507FRJ* Flush

Dual RJ11/RJ45

Connector Faceplate – Same

as 5507RJ except the connectors

are recessed to provide a

flush installation.

5507AAP Extron® AAP Faceplate –

5507AAP-WH Accepts two Extron® Electronics

5507AAP-G AAP single space modules.

5507AAP-FW

Catalog No./Item Description/Specifications

5507MAAP Extron® MAAP Faceplate –

5507MAAP-WH Accepts two Extron® Electronics

5507MAAP-G MAAP single space modules.

5507MAAP-FW

5507-4TJ*

Ortronics Faceplate – Mounts

Ortronics datacom inserts.

Accepts four TracJack Devices.

5507-6TJ*

Ortronics Faceplate – Mounts

Ortronics datacom inserts.

Accepts six TracJack Devices.

ARA-S2

Angled Raceway Adapter – For

use with multi-channel raceway

device brackets and WallSource

device mounting brackets. Angled

exit provides additional mounting

depth required for A/V connections

as well as ensuring the required

bend radius for UTP and fiber optic

cabling. Holds two Ortronics®

Series II modules.Fits 5507 Series

Faceplate opening.

CM-ARA Angled Raceway Adapter – For

use with multi-channel raceway

device brackets and WallSource

device mounting brackets. Angled

exit provides additional mounting

depth required for A/V connections

as well as ensuring the required

bend radius for UTP and fiber optic

cabling. Holds two CM2 Series

modules or two Pass & Seymour®

2A inserts. Fits 5507 Series

Faceplate opening.

CM-EPLA* End Plates – Includes two

outlet identification labels with

clear covers and two matching

screw covers. Required for

mounting Pass & Seymour

Activate and Wiremold CM2 Open

System communication modules

into 5550 Series device brackets.

S2-EPL End Plates – Includes two

outlet identification labels with

clear covers and two matching

screw covers. Required for

mounting Ortronics Series II

modules into 5550 Series

device brackets.

5507 Series Faceplates

NOTE: All faceplates are 4 1/4" long x 1 11/16" wide [108mm x 43mm].

* Available in Ivory finish or add “-WH” suffix for White finish.

© Copyright 2014 Legrand All Rights Reserved

ED864R14 – Updated March 2014 – For latest specs visit www.legrand.us/wiremold

Electrical Wiring Systems

60 Woodlawn Street

West Hartford, CT 06110

Phone: 1.877.BY.LEGRAND (295-3472)

www.legrand.us

570 Applewood Crescent

Vaughan, Ontario L4K 4B4

Phone:905.738.9195

www.legrand.ca

NOTES