1000430718 Catalog

142490-Brochure 142490-Brochure 142490-Brochure B5 unilog cesco-content

2016-10-06

: Pdf 1000430718-Catalog 1000430718-Catalog B5 unilog

Open the PDF directly: View PDF PDF.
Page Count: 24

L-1www.hubbell-wiring.com Wiring Device-Kellems
®
Section L
Hospital Products
Index
Product Page
HBL® Extra Heavy Duty Hospital Grade Duplex Receptacles
Features and Benefits .......................................L-2
Duplex and Style Line® Decorator .............................L-3
SNAPConnect® Receptacles .................................L-4
Hubbell-PRO Receptacles ...................................L-7
USB Charger Receptacle ....................................L-9
Single and 4-PLEX® Receptacles ..............................L-9
Hospital Grade Plugs, Connector Bodies and Receptacles
15 and 20A, 125V .........................................L-10
15 and 20A, 250V .........................................L-11
Extra Heavy Duty Industrial GFCI Receptacles ...................L-12
Commercial GFCI Receptacles
Tamper-Resistant .........................................L-13
Standard ................................................L-14
Tamper-Resistant and Weather Resistant .......................L-15
Hospital Grade Surge Protection Devices .......................L-16
Hubbellock® Plugs, Connectors and Receptacles .................L-17
Hubbellock® Mobile X-Ray Devices .............................L-18
Technical Information ........................................L-19
HBL® Extra Heavy Duty
Industrial Series
Surge Protection Devices
Industrial and Commercial
Series GFCIs
Hubbellock® Receptacles,
Plugs and Connectors
www.hubbell-wiring.comL-2 Wiring Device-Kellems
®
To qualify for the “Hospital Grade” designation and use of the
associated green dot symbol, UL requires that the manufacturer
design its devices to perform to specic levels. These levels form
an established baseline below which no manufacturer can fall
and still carry a green dot.
Hubbell sets their standards high. Each product is built to
withstand the severe conditions of abuse that are unique to the
hospital environment. Hubbell receptacles have exclusive design
features that set them apart from the competition.
• Exclusive nickel-plated bypass contact design increases contact
pressure, lowering the operating temperature.
• Four point grounding system provides redundant grounding for
low resistance ground continuity in high abuse areas.
• High tech reinforced thermoplastic polyester (RTP) back is tough
and heat resistant.
Because of these features and others, the benet is performance,
reliability, and value for any health care facility.
Hubbell “Hospital Grade” Devices
One piece, nickel plated brass mounting
strap with integral ground contacts, along
with secondary ground contact, provides
superior grounding for low resistance flow of
fault currents as well as corrosion resistance.
Barbed locking arms keep the face locked in
place to diminish potential for face/base
separation. Back wired ground screw
reduces installation time.
Reinforced thermoplastic back provides
superior thermal, electrical and mechanical
properties. By providing contact stability,
this high performance material will reduce
heat buildup giving you long lasting
performance.
Exclusive bypass contacts are made of
nickel-plated brass alloy. This design
increases blade retention forces, insuring
a reliable uninterrupted flow of power.
External wiring clamps allow for visual
inspection of the terminals. A unique
strand containment feature on the terminal
“bundles” the wire, ensuring 100%
clamping of wire strands and reducing
heat from the termination.
Straight Blade Devices
HBL® Extra Heavy Duty Hospital Grade Duplex Receptacles
Features and Benefits
One-piece nickel-plated brass
integral ground strap for greater
corrosion resistance
Patented ground contact provides
redundant grounding
Unique bypass contact design
results in greater contact force
and reduced heat buildup
Square head, 10-thread bronze
center rivet won’t rotate, reduces
stripping and resists corrosion
I.D. marking surface provides
quick, sure circuit identification
Barbed assembly arms reduce
possibility of face/base separation
Back wired ground terminal
allows faster, easier installation
RTP base offers greater heat
resistance, plus contact stability
External bundling terminals contain
wire strands and are designed for
quick inspection
Deep body design increases
impact and chemical resistance
HBL8200GY
L-3www.hubbell-wiring.com Wiring Device-Kellems
®
HBL8200GY
HBL8300RMRI
HBL8200ILW
HBL2172
HBL8300SGA
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
HBL® Extra Heavy Duty
Hospital Grade Receptacles
Duplex
Description Color Catalog Number
Flush, thermoplastic polyester face,
back and side wired.
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
HBL8200BK
–
HBL8200
HBL8200GY
HBL8200I
HBL8200LA
HBL8200RED
HBL8200W
–
HBL8300BL
HBL8300
HBL8300GY
HBL8300I
HBL8300LA
HBL8300RED
HBL8300W
Flush, LED illuminated face,
back and side wired.
Gray
Ivory
Red
White
HBL8200ILGY
HBL8200ILI
HBL8200ILR
HBL8200ILW
HBL8300ILGY
HBL8300ILI
HBL8300ILR
HBL8300ILW
Tamper-Resistant receptacle
with wire leads. Complies with
requirements of NEC® article
517-18 (c).
Brown
Gray
Ivory
Light Almond
Red
White
HBL8200SGA
HBL8200SGGYA
HBL8200SGIA
HBL8200SGLA
HBL8200SGRA
HBL8200SGWA
HBL8300SGA
HBL8300SGGYA
HBL8300SGIA
HBL8300SGLA
HBL8300SGRA
HBL8300SGWA
Isolated ground∆.Orange
Red
IG8200
IG8200R
IG8300
IG8300R
MRI Receptacle, Duplex
Description Color Catalog Number
MRI receptacle, ush, thermoplastic
polyester face, back and side wired.
Ivory
Light Almond
Red
White
HBL8200IMRI
HBL8200LAMRI
HBL8200RMRI
HBL8200WMRI
HBL8300IMRI
HBL8300LAMRI
HBL8300RMRI
HBL8300WMRI
Slender/Compact, Duplex
Description Color Catalog Number
Flush, thermoplastic polyester face,
back, and side wired.
Fed. Spec. veried.
Brown
Gray
Green
Ivory
Light Almond
Red
White
HBL8200H
HBL8200HG
–
HBL8200HI
HBL8200HLA
HBL8200HRED
HBL8200HW
HBL8300H
HBL8300HG
HBL8300HGN
HBL8300HI
HBL8300HLA
HBL8300HRED
HBL8300HW
Style Line® Decorator*
Description Color Catalog Number
Flush, nylon face,
back and side wired.
Brown
Gray
Ivory
Ofce White
Red
White
HBL2172
HBL2172GY
HBL2172I
–
HBL2172R
HBL2172WA
HBL2182
HBL2182GY
HBL2182I
HBL2182OW
HBL2182R
HBL2182WA
Isolated ground∆.Ivory
Orange
White
–
–
–
IG2182I
IG2182
IG2182WA
Note: ∆See section M for additional information on isolated ground devices.
*Not Fed. Spec. Listed.
See pages A-48 and A-49 for accessories.
See page L-19 for technical information.
See page Tech-10 for Tamper-Resistant description.
See section N for wallplates.
IP20
SUITABILITY
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
NEC® is a registered trademark of the National Fire Protection Association (NFPA). Dimensions in Inches (mm)
www.hubbell-wiring.comL-4 Wiring Device-Kellems
®
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
IP20
SUITABILITY
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
2.62"
(66.5)
1.64"
(41.7)
3.28"
(83.3)
SNAP8300RLTR
.86"
(21.9)
2.62"
(66.5)
1.64"
(41.7)
3.28"
(83.3)
SNAP8300L
.86"
(21.9)
2.62"
(66.5)
.86"
(21.9)
1.56"
(39.7)
3.28"
(83.3)
SNAP8300WA
.78"
(19.8) 1.48"
(37.6)
.63"
(16.0)
SNAP1RA
2.62"
(66.5)
1.64"
(41.7)
3.28"
(83.3)
SNAP8300LATR
.86"
(21.9)
Dimensions in Inches (mm)
Many of these products are Assembled in USA, as indicated, and many are Buy
American Compliant. Please contact Hubbell with any certication requirements.
Extra Heavy Duty
Hospital Grade SNAPConnect®
Duplex
Description Color Catalog Number
Hospital grade, nder groove, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA*.
* For Assembled in USA receptacles drop off the
last “A” and add suffix NA. Ex: SNAP8200BKNA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKA*
SNAP8200A*
SNAP8200GYA*
SNAP8200IA*
SNAP8200LAA*
SNAP8200RA*
SNAP8200WA*
SNAP8300BKA*
SNAP8300A*
SNAP8300GYA*
SNAP8300IA*
SNAP8300LAA*
SNAP8300RA*
SNAP8300WA*
Hospital grade, Tamper-Resistant,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKTR
SNAP8200TR
SNAP8200GYTR
SNAP8200ITR
SNAP8200LATR
SNAP8200RTR
SNAP8200WTR
SNAP8300BKTR
SNAP8300TR
SNAP8300GYTR
SNAP8300ITR
SNAP8300LATR
SNAP8300RTR
SNAP8300WTR
Isolated ground∆, Hospital grade,
Tamper-Resistant.
Orange
Red
SNAP8200IGTR
SNAP8200RIGTR
SNAP8300IGTR
SNAP8300RIGTR
Hospital grade, with Power Indicating LED,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKL
SNAP8200L
SNAP8200GYL
SNAP8200IL
SNAP8200LAL
SNAP8200RL
SNAP8200WL
SNAP8300BKL
SNAP8300L
SNAP8300GYL
SNAP8300IL
SNAP8300LAL
SNAP8300RL
SNAP8300WL
Isolated ground∆, Hospital grade,
with Power Indicating LED.
Orange
Red
SNAP8200IGL
SNAP8200RIGL
SNAP8300IGL
SNAP8300RIGL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKLTR
SNAP8200LTR
SNAP8200GYLTR
SNAP8200ILTR
SNAP8200LALTR
SNAP8200RLTR
SNAP8200WLTR
SNAP8300BKLTR
SNAP8300LTR
SNAP8300GYLTR
SNAP8300ILTR
SNAP8300LALTR
SNAP8300RLTR
SNAP8300WLTR
Isolated ground∆, Hospital grade,
TR with Power Indicating LED.
Orange
Red
SNAP8200IGLTR
SNAP8200RIGLTR
SNAP8300IGLTR
SNAP8300RIGLTR
Note: ∆See section M additional information on isolated ground devices.
See page A-15 for additional information on SNAPConnect® features.
See pages A-48 and A-49 for accessories.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See page L-20 for technical information.
See section N for wallplates.
Consult factory for available Split-Circuit capable SNAPConnect® devices.
SNAPConnect® Right Angle Pigtailed Connector
Description Wire Type
General Use
Catalog Number
Assembled in USA
Catalog Number
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate
housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
Note: For Assembled in USA products, must order connector with NA suffix.
See page L-20 for technical information.
L-5www.hubbell-wiring.com Wiring Device-Kellems
®
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
IP20
SUITABILITY
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
1.48"
(37.6)
.63"
SNAP1RA
2.62"
(66.5)
1.64"
(41.7)
3.28"
(83.3)
SNAP2182A
.86"
(21.9)
2.62"
(66.5)
1.64"
(41.7)
3.28"
(83.3)
SNAP2182RL
.86"
(21.9)
2.62"
(66.5)
1.64"
(41.7)
3.28"
(83.3)
SNAP2182ITR
.86"
(21.9)
2.62"
(66.5)
1.64"
(41.7)
3.28"
(83.3)
SNAP2182GYLTR
.86"
(21.9)
Dimensions in Inches (mm)
Many of these products are Assembled in USA, as indicated, and many are Buy
American Compliant. Please contact Hubbell with any certication requirements.
Extra Heavy Duty
Hospital Grade SNAPConnect®
Style Line® Decorator
Description Color Catalog Number
Hospital grade, Style Line® decorator,
ush, nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA*.
* For Assembled in USA receptacles drop off the
last “A” and add suffix NA. Ex: SNAP2172BKNA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKA*
SNAP2172A*
SNAP2172GYA*
SNAP2172IA*
SNAP2172LAA*
SNAP2172RA*
SNAP2172WA*
SNAP2182BKA*
SNAP2182A*
SNAP2182GYA*
SNAP2182IA*
SNAP2182LAA*
SNAP2182RA*
SNAP2182WA*
Hospital grade, Tamper-Resistant,
Style Line® decorator, ush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKTR
SNAP2172TR
SNAP2172GYTR
SNAP2172ITR
SNAP2172LATR
SNAP2172RTR
SNAP2172WTR
SNAP2182BKTR
SNAP2182TR
SNAP2182GYTR
SNAP2182ITR
SNAP2182LATR
SNAP2182RTR
SNAP2182WTR
Isolated ground∆, Hospital grade,
Tamper-Resistant.
Orange
Red
SNAP2172IGTR
SNAP2172RIGTR
SNAP2182IGTR
SNAP2182RIGTR
Hospital grade, with Power Indicating LED,
Style Line® decorator, ush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKL
SNAP2172L
SNAP2172GYL
SNAP2172IL
SNAP2172LAL
SNAP2172RL
SNAP2172WL
SNAP2182BKL
SNAP2182L
SNAP2182GYL
SNAP2182IL
SNAP2182LAL
SNAP2182RL
SNAP2182WL
Isolated ground∆, Hospital grade,
with Power Indicating LED.
Orange
Red
SNAP2172IGL
SNAP2172RIGL
SNAP2182IGL
SNAP2182RIGL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
Style Line® decorator, ush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKLTR
SNAP2172LTR
SNAP2172GYLTR
SNAP2172ILTR
SNAP2172LALTR
SNAP2172RLTR
SNAP2172WLTR
SNAP2182BKLTR
SNAP2182LTR
SNAP2182GYLTR
SNAP2182ILTR
SNAP2182LALTR
SNAP2182RLTR
SNAP2182WLTR
Isolated ground∆, Hospital grade,
TR with Power Indicating LED.
Orange
Red
SNAP2172IGLTR
SNAP2172RIGLTR
SNAP2182IGLTR
SNAP2182RIGLTR
Note: ∆See section M additional information on isolated ground devices.
See page A-15 for additional information on SNAPConnect® features.
See pages A-48 and A-49 for accessories.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See page L-20 for technical information.
See section N for wallplates.
Consult factory for available Split-Circuit capable SNAPConnect® devices.
SNAPConnect® Right Angle Pigtailed Connector
Description Wire Type
General Use
Catalog Number
Assembled in USA
Catalog Number
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate
housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
Note: For Assembled in USA products, must order connector with NA suffix.
See page L-20 for technical information.
www.hubbell-wiring.comL-6 Wiring Device-Kellems
®
SNAPConnect® USB Charger
Hospital Grade , Duplex Receptacles
Description Color Catalog Number
Hospital Grade SNAPConnect
USB Charger, Tamper-Resistant
Style Line® decorator duplex receptacle,
two USB type 2.0 ports 3 Amp, 5 Volt DC,
15 or 20 Amp, 125 Volt AC.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200USBBK
SNAP8200USB
SNAP8200USBGY
SNAP8200USBI
SNAP8200USBLA
SNAP8200USBR
SNAP8200USBW
SNAP8300USBBK
SNAP8300USB
SNAP8300USBGY
SNAP8300USBI
SNAP8300USBLA
SNAP8300USBR
SNAP8300USBW
2.62"
(66.5)
1.75"
(44.5)
3.28"
(83.3)
SNAP8300USBW
1.54"
(39.1)
2.76"
(70.0)
1.75"
(44.5)
3.28"
(83.3)
GFTWRST83SNAPI
1.10"
(27.8)
2.76"
(70.0)
1.75"
(44.5)
3.28"
(83.3)
GFRST83SNAPR
1.10"
(27.8)
SNAPConnect® GFCI LED Hospital Grade ,
Assembled in USA
Description Rating Color Catalog Number
Hospital Grade SNAPConnect
GFCI LED, self-grounding
staple, requires connector
below, sold separately.
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFRST82SNAPAL
GFRST82SNAPBK
GFRST82SNAP
GFRST82SNAPGY
GFRST82SNAPI
GFRST82SNAPLA
GFRST82SNAPR
GFRST82SNAPW
GFRST83SNAPAL
GFRST83SNAPBK
GFRST83SNAP
GFRST83SNAPGY
GFRST83SNAPI
GFRST83SNAPLA
GFRST83SNAPR
GFRST83SNAPW
SNAPConnect® GFCI LED Hospital Grade ,
Tamper and Weather Resistant, Assembled in USA
Description Rating Color Catalog Number
Hospital Grade SNAPConnect
GFCI TR/WR, self-grounding
staple, requires connector
below, sold separately.
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFTWRST82SNAPAL
GFTWRST82SNAPBK
GFTWRST82SNAP
GFTWRST82SNAPGY
GFTWRST82SNAPI
GFTWRST82SNAPLA
GFTWRST82SNAPR
GFTWRST82SNAPW
GFTWRST83SNAPAL
GFTWRST83SNAPBK
GFTWRST83SNAP
GFTWRST83SNAPGY
GFTWRST83SNAPI
GFTWRST83SNAPLA
GFTWRST83SNAPR
GFTWRST83SNAPW
SNAPConnect® Right Angle Pigtailed Terminal
Description Wire Type
General Use
Catalog Number
Assembled in USA
Catalog Number
Clear right angle terminal with 6 inch leads,
600V, #12 AWG THHN/THWN-2,
Polycarbonate housing material.
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
Note: See page Tech-10 for Tamper-Resistant and Weather Resistant descriptions.
See page M-19 for SNAPConnect® technical information.
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Meets UL
Standard 943
Class A GFCI
2.62"
(66.5)
1.75"
(44.5)
3.28"
(83.3)
SNAP8262S
1.33"
(33.8)
SNAPConnect® Surge Protection
Hospital Grade , Tamper-Resistant
Receptacle with Power Indicating LED
Description Color Catalog Number
Hospital Grade SNAPConnect
Surge supression, Tamper-Resistant,
smooth face, duplex receptacle.
Blue
Gray
Ivory
Light Almond
Red
White
SNAP8262S
SNAP8262GYS
SNAP8262IS
SNAP8262LAS
SNAP8262RS
SNAP8262WS
SNAP8362S
SNAP8362GYS
SNAP8362IS
SNAP8362LAS
SNAP8362RS
SNAP8362WS
1.48"
(37.6)
.63"
SNAP1RA
Dimensions in Inches (mm)
L-7www.hubbell-wiring.com Wiring Device-Kellems
®
Hospital Products
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
2.73"
(69.3)
1.15"
(29.1)
1.57"
(39.9)
3.28"
(83.3)
8200REDLTRA
2.73"
(69.3)
1.15"
(29.1)
1.57"
(39.9)
3.28"
(83.3)
8200TRA
2.73"
(69.3)
1.15"
(29.1)
1.57"
(39.9)
3.28"
(83.3)
8200LA
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Dimensions in Inches (mm)
Hubbell-PRO Heavy Duty
Hospital Grade Receptacles
Duplex
Description Color Catalog Number
Hospital grade,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BK
8200
8200GY
8200IV
8200LA
8200RED
8200WHI
8300BK
8300
8300GY
8300IV
8300LA
8300RED
8300WHI
Hospital grade, Tamper-Resistant,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BKTR
8200TR
8200GYTR
8200IVTR
8200LATR
8200REDTR
8200WTR
8300BKTRA
8300TRA
8300GYTRA
8300IVTRA
8300LATRA
8300REDTRA
8300WTRA
Hospital grade,
with Power Indicating LED,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BKL
8200L
8200GYL
8200IVL
8200LAL
8200REDL
8200WL
8300BKL
8300L
8300GYL
8300IVL
8300LALM
8300REDL
8300WL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BKLTR
8200LTR
8200GYLTR
8200IVLTR
8200LALTR
8200REDLTR
8200WLTR
8300BKLTRA
8300LTRA
8300GYLTRA
8300IVLTRA
8300LALTRA
8300REDLTRA
8300WLTRA
Note: See pages A-48 and A-49 for accessories.
See page L-21 for technical information.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See section N for wallplates.
The products listed on this page are Assembled in USA, and many are Buy American
Compliant. Please contact Hubbell with any certication requirements.
Automatic self-grounding staple
Combination Tamper-Resistant and
LED for pediatric emergency circuits
Nylon face and base construction
Circuit ID marking area
Back and side wiring
Tri drive screws
Steel mounting strap
Hubbell-PRO Features
8200REDLTRA
www.hubbell-wiring.comL-8 Wiring Device-Kellems
®
Hospital Products
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
2.73"
(69.3)
1.15"
(29.1)
1.57"
(39.9)
3.28"
(83.3)
2172LATRA
2.73"
(69.3)
1.15"
(29.1)
1.57"
(39.9)
3.28"
(83.3)
2172L
2.73"
(69.3)
1.15"
(29.1)
1.57"
(39.9)
3.28"
(83.3)
2182IVLTRA
Dimensions in Inches (mm)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Hubbell-PRO Heavy Duty
Hospital Grade Receptacles
Style Line® Decorator
Description Color Catalog Number
Hospital grade,
Style Line® decorator,
ush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BK
2172
2172GY
2172IV
2172LA
2172RED
2172W
2182BK
2182
2182GY
2182IV
2182LA
2182RED
2182W
Hospital grade, Tamper-Resistant,
Style Line® decorator,
ush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BKTR
2172TR
2172GYTR
2172IVTR
2172LATR
2172REDTR
2172WTR
2182BKTRA
2182TRA
2182GYTRA
2182IVTRA
2182LATRA
2182REDTRA
2182WTRA
Hospital grade,
with Power Indicating LED,
Style Line® decorator,
ush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BKL
2172L
2172GYL
2172IVL
2172LAL
2172REDL
2172WL
2182BKL
2182L
2182GYL
2182IVL
2182LAL
2182REDL
2182WL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
Style Line® decorator,
ush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BKLTR
2172LTR
2172GYLTR
2172IVLTR
2172LALTR
2172REDLTR
2172WLTR
2182BKLTRA
2182LTRA
2182GYLTRA
2182IVLTRA
2182LALTRA
2182REDLTRA
2182WLTRA
Note: See pages A-48 and A-49 for accessories.
See page L-21 for technical information.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See section N for wallplates.
The products listed on this page are Assembled in USA, and many are Buy American
Compliant. Please contact Hubbell with any certication requirements.
2182IVLTRA
Automatic self-grounding staple
Combination Tamper-Resistant and
LED for pediatric emergency circuits
Nylon face and base construction
Back and side wiring
Tri drive screws
Steel mounting strap
Hubbell-PRO Features
L-9www.hubbell-wiring.com Wiring Device-Kellems
®
HBL® Extra Heavy Duty
Hospital Grade
Single Receptacles
Description Color Catalog Number
Flush, nylon face,
back and side wired,
Fed. Spec. veried.
Almond
Brown
Gray
Ivory
Red
White
–
HBL8210
HBL8210GY
HBL8210I
HBL8210R
HBL8210W
HBL8310AL
HBL8310
HBL8310GY
HBL8310I
HBL8310R
HBL8310W
Panel mount on 1.94 in.
(49.2) centers.
Brown
Ivory
HBL8284
HBL8284I
–
HBL8384I
Isolated ground∆.Orange IG8210 IG8310
Note: ∆See section M for additional information on isolated ground devices.
4-PLEX®
Hospital Grade Receptacles
Description Color Catalog Number
4 outlet high impact resistant
Polycarbonate construction.
Mount to 4 in. square box.
Brown
Gray
Ivory
Red
White
HBL415H
–
HBL415HI
HBL415HR
HBL415HW
HBL420H
HBL420HGY
HBL420HI
HBL420HR
HBL420HW
4-PLEX® Accessories
Description Color Catalog Number
4-PLEX adapter plates for
1- and 2-gang, device boxes.
Brown
Gray
Ivory
Red
White
HBL4AP
HBL4APGY
HBL4API
HBL4APR
HBL4APW
HBL4AP
HBL4APGY
HBL4API
HBL4APR
HBL4APW
Note: See page A-25 for additional information on 4-PLEX devices.
See page A-62 for technical information.
4-PLEX devices are not Fed. Spec. Listed.
Hospital Products
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
HBL415HI
.92”
(23.4)
.1”
(2.5)
4.30” sq
.
(109.2)
3.02” (76.7)
3.38” (85.9)
4.78"
(121.4)
1.75"
(44.5 )
3.38"sq. (85.9)
.19" (4.8)
.38" (9.7)
HBL4API
3.28"
(83.3)
2.75"
(69.9)
IP20
SUITABILITY
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
1.94"
(49.3)
1.19"
(30.2)
1.63"
(41.4)
3.28"
(83.3)
HBL8210GY
Dimensions in Inches (mm)
USB Charger Tamper-Resistant
Hospital Grade Receptacles
Description Color Catalog Number
USB Charger Tamper-Resistant receptacle,
Two USB Type 2.0 ports 3.8 Amp, 5 Volt DC,
15 or 20 Amp, 125 Volt AC decorator duplex.
Black
Brown
Gray
Ivory
Light Almond
Red
White
USB8200BK
USB8200
USB8200GY
USB8200I
USB8200LA
USB8200R
USB8200W
USB8300BK
USB8300
USB8300GY
USB8300I
USB8300LA
USB8300R
USB8300W
Note: See page A-20 for standard USB charger.
See page Tech-10 for Tamper-Resistant description.
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
2.62"
(66.5)
1.96"
(49.9)
1.75"
(44.5)
3.28"
(83.3)
USB8300W
www.hubbell-wiring.comL-10 Wiring Device-Kellems
®
HBL8215C
HBL8115V
HBL8219C
HBL8219CT
Hospital Grade Plugs
Insulgrip®
Description Cord Diameter Catalog Number
Black and white nylon. .230"-.720" (5.8-18.3) HBL8215C HBL8315C
Transparent housing. .230"-.720" (5.8-18.3) HBL8215CT HBL8315CT
8 position angle plug,
transparent housing.
.250"-.655" (6.4-16.6) HBL8215CAT* HBL8315CAT*
Valise®
Description Cord Diameter Catalog Number
White nylon. .300"-.660" (7.6-16.8) HBL 8115V HBL8364V
Insulation displacement,
white nylon.
.300"-.360" (7.6-9.1) HBL8013V* −
Note: *Not Fed. Spec. Listed.
See page A-49 for accessories.
See pages L-23 and L-24 for technical information.
Hospital Grade Connector Bodies
Insulgrip®
Description Cord Diameter Catalog Number
Black and white nylon. .230"-.720" (5.8-18.3) HBL8219C HBL8319C
Transparent housing. .230"-.720" (5.8-18.3) HBL8219CT HBL8319CT
Valise®
Description Cord Diameter Catalog Number
White nylon. .300"-.660" (7.6-16.8) HBL 8119V –
Note: See page A-49 for accessories.
See pages L-23 and L-24 for technical information.
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
IP20
SUITABILITY
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
IP20
SUITABILITY
15A 125V
NEMA 5-15P
UL CSA
G
W
20A 125V
NEMA 5-20P
UL CSA
G
W
Dimensions in Inches (mm)
L-11www.hubbell-wiring.com Wiring Device-Kellems
®
HBL8600I
HBL8469V
HBL8666V
Hospital Grade Plugs
Valise®
Description Cord Diameter Catalog Number
Valise plug, white nylon. .300"-.660" (7.6-16.8) HBL8666V HBL8464V
Note: HP ratings listed above are based on 208 to 240V AC only.
Hospital Grade Receptacles
HBL® Extra Heavy Duty, Duplex
Description Color Catalog Number
Flush, thermoplastic polyester
face, back and side wired,
multiple drive screws.
Brown
Ivory
HBL8600
HBL8600I
HBL8400
HBL8400I
Note: See page A-48 for accessories.
See section N for wallplates.
Hospital Grade Connector Bodies
Valise®
Description Cord Diameter Catalog Number
White nylon. .300"-.660" (7.6-16.8) HBL8469V
Straight Blade Devices
15 and 20 Ampere, 250 Volts
2 Pole, 3 Wire Grounding
G
15A 250V
NEMA 6-15R
UL CSA
1.5 HP
G
15A 250V
NEMA 6-15R
UL CSA
1.5 HP
G
20A 250V
NEMA 6-20R
UL CSA
2 HP
G
20A 250V
NEMA 6-20R
UL CSA
2 HP
IP20
SUITABILITY
G
15A 250V
NEMA 6-15P
UL CSA
1.5 HP
G
20A 250V
NEMA 6-20P
UL CSA
2 HP
Dimensions in Inches (mm)
www.hubbell-wiring.comL-12 Wiring Device-Kellems
®
Hospital Products
Extra Heavy Duty Industrial GFCI Receptacles
Tamper-Resistant and Weather Resistant
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Meets UL Standard 943
Class A GFCI
AUTOGUARD® Self Test GFCI Receptacles
Tamper-Resistant and Weather Resistant
Description Rating Color Catalog Number
Flush, polyester face,
back and side wired,
multiple drive screws.
15 and 20A
125V AC
Black
Brown
Gray
Ivory
Red
White
GFR8200SGBK
GFR8200SG
GFR8200SGGY
GFR8200SGI
GFR8200SGR
GFR8200SGW
GFR8300SGBK
GFR8300SG
GFR8300SGGY
GFR8300SGI
GFR8300SGR
GFR8300SGW
Note: GFCI type receptacles should not be used in critical care patient areas or for electrical life support equipment applications because
of
the possibility of power interruption. All GFCI receptacles listed above are furnished with both a matching color nylon wallplate,
and a SS26 302/304 super stainless steel wallplate. 20 amp feed-through capability.
See page Tech-10 for Tamper-Resistant and Weather Resistant descriptions.
GFR5362SGI
GFR8300SGW
Features
10kA Short Circuit Current Rating
Limits improper access to energized contacts
•Exclusive patented tamper-resistant protection through
switching technology
• Continually tests and monitors for people protection automatically
•Patented self test diagnostics
Power indication
•Steady “ON” GREEN LED provides indication of power
Ground fault indicator
•Steady “ON” RED LED provides visual indication of a
ground fault condition; ashing red indicates device has
lost capability to provide protection
No power at face if reverse wired
•Open circuit condition eliminates false assumption of
protection at face
Durable face with V-0 ammability rating
•Polyester face cover
GFCI Receptacle Specifications per GFCI Products Listed (Pages L-12 to L-15)
Trip Level 4 to 6 mA.
Trip Time .025 second nominal.
Frequency 60 Hz.
Voltage 120V AC +10% - 15% (102V to 132V).
Amperage 15A/20A, 20A Feed Thru.
Maximum Interrupting Capacity 10,000A.
Operating Temperature -35°C to 66°C or -30°F to 150°F.
Maximum Humidity 95%.
Listings and Standards Meets UL498 for receptacles, UL943 Class A for GFCIs UL File E41978.
CSA Certified.
Codes Meets all NEC® and CEC requirements. NEMA WD-6 ANSI 73.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
Continually tests and monitors for people protection automatica
lly
L-13www.hubbell-wiring.com Wiring Device-Kellems
®
Hospital Products
Commercial Tamper-Resistant GFCI Receptacles Meets UL Standard 943
Class A GFCI
Features
• Patented shutter design for tamper-resistant protection
• Compliant with NEC® 406.12 and NEC® 517-18(c)
• Patented AUTOGUARD® self test technology includes
disconnecting power to the receptacle if critical
components are damaged and GFCI protection is lost
• Alarm version provides audible notication of a
trip condition
Hospital Grade •
Tamper-Resistant
Description Rating Color Catalog Number
Night Light
Two LED Night Lights,
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFTRST82ALNL
GFTRST82BKNL
GFTRST82NL
GFTRST82GYNL
GFTRST82INL
GFTRST82LANL
GFTRST82RNL
GFTRST82WNL
GFTRST83ALNL
GFTRST83BKNL
GFTRST83NL
GFTRST83GYNL
GFTRST83INL
GFTRST83LANL
GFTRST83RNL
GFTRST83WNL
Alarm,
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFTRST82ALB
GFTRST82BKB
GFTRST82B
GFTRST82GYB
GFTRST82IB
GFTRST82LAB
GFTRST82RB
GFTRST82WB
GFTRST83ALB
GFTRST83BKB
GFTRST83B
GFTRST83GYB
GFTRST83IB
GFTRST83LAB
GFTRST83RB
GFTRST83WB
D
AB
C
E
GFCI Receptacle
A3.27 (83.1)
B2.75 (69.8)
C1.75 (44.5)
D1.47 (37.4)
E1.10 (27.9)
Product Dimensions Inches (mm)
GFTRST20
GFTRST83WNL
GFTRST83GYB
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
www.hubbell-wiring.comL-14 Wiring Device-Kellems
®
Ground Fault Products
Commercial Standard Hospital Grade GFCI Receptacles
Hospital Grade •
Rating Rating Color Catalog Number
Standard,
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFRST82AL
GFRST82BK
GFRST82
GFRST82GY
GFRST82I
GFRST82LA
GFRST82R
GFRST82W
GFRST83AL
GFRST83BK
GFRST83
GFRST83GY
GFRST83I
GFRST83LA
GFRST83R
GFRST83W
Assembled in USA,
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFRST82ALU
GFRST82BKU
GFRST82U
GFRST82GYU
GFRST82IU
GFRST82LAU
GFRST82RU
GFRST82WU
GFRST83ALU
GFRST83BKU
GFRST83U
GFRST83GYU
GFRST83IU
GFRST83LAU
GFRST83RU
GFRST83WU
Night Light
Two LED Night Lights,
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFRST82ALNL
GFRST82BKNL
GFRST82NL
GFRST82GYNL
GFRST82INL
GFRST82LANL
GFRST82RNL
GFRST82WNL
GFRST83ALNL
GFRST83BKNL
GFRST83NL
GFRST83GYNL
GFRST83INL
GFRST83LANL
GFRST83RNL
GFRST83WNL
Alarm,
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFRST82ALB
GFRST82BKB
GFRST82B
GFRST82GYB
GFRST82IB
GFRST82LAB
GFRST82RB
GFRST82WB
GFRST83ALB
GFRST83BKB
GFRST83B
GFRST83GYB
GFRST83IB
GFRST83LAB
GFRST83RB
GFRST83WB
SNAPConnect®,
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFRST82SNAPAL
GFRST82SNAPBK
GFRST82SNAP
GFRST82SNAPGY
GFRST82SNAPI
GFRST82SNAPLA
GFRST82SNAPR
GFRST82SNAPW
GFRST83SNAPAL
GFRST83SNAPBK
GFRST83SNAP
GFRST83SNAPGY
GFRST83SNAPI
GFRST83SNAPLA
GFRST83SNAPR
GFRST83SNAPW
Right Angle Pigtailed Terminal Type Catalog Number
Clear right angle terminal with 6 inch leads,
600V, #12 AWG THHN/THWN-2,
Polycarbonate housing material.
Solid
Stranded
SNAP1RA
SNAP2RA
Features
•Fed. Spec UL Listed, Hospital Grade
•Green power indicator and red trip indicator
•Patented AUTOGUARD® self test technology
•Flush, nylon face, back and side wired,
multiple drive screws, self-grounding staple.
GFRST82WNL
Meets UL Standard 943
Class A GFCI
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
GFRST83BKB
GFRST83INL
GFRST82R
GFRST83SNAPGY
L-15www.hubbell-wiring.com Wiring Device-Kellems
®
Hospital Products
Commercial Tamper-Resistant and Weather Resistant
GFCI Receptacles Meets UL Standard 943
Class A GFCI
Features
• Patented shutter design for tamper-resistant protection
• Meets NEC requirements for TR (517-18c) and WR
(406.9), UV and corrosion resistance for harsh and
damp applications
• Patented AUTOGUARD® self test technology
• Protects against line and load reversal, no power to
the face or downstream if device is miswired
GFTWRST20WIG
Hospital Grade • Tamper-Resistant
Weather Resistant
Description Rating Color Catalog Number
Standard,
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFTWRST82AL
GFTWRST82BK
GFTWRST82
GFTWRST82GY
GFTWRST82I
GFTWRST82LA
GFTWRST82R
GFTWRST82W
GFTWRST83AL
GFTWRST83BK
GFTWRST83
GFTWRST83GY
GFTWRST83I
GFTWRST83LA
GFTWRST83R
GFTWRST83W
Assembled in USA,
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFTWRST82ALU
GFTWRST82BKU
GFTWRST82U
GFTWRST82GYU
GFTWRST82IU
GFTWRST82LAU
GFTWRST82RU
GFTWRST82WU
GFTWRST83ALU
GFTWRST83BKU
GFTWRST83U
GFTWRST83GYU
GFTWRST83IU
GFTWRST83LAU
GFTWRST83RU
GFTWRST83WU
Isolated Ground,
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFTWRST82ALIG
GFTWRST82BKIG
GFTWRST82IG
GFTWRST82GYIG
GFTWRST82IIG
GFTWRST82LAIG
GFTWRST82RIG
GFTWRST82WIG
GFTWRST83ALIG
GFTWRST83BKIG
GFTWRST83IG
GFTWRST83GYIG
GFTWRST83IIG
GFTWRST83LAIG
GFTWRST83RIG
GFTWRST83WIG
SNAPConnect®,
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple
15 and 20A
125V AC
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFTWRST82SNAPAL
GFTWRST82SNAPBK
GFTWRST82SNAP
GFTWRST82SNAPGY
GFTWRST82SNAPI
GFTWRST82SNAPLA
GFTWRST82SNAPR
GFTWRST82SNAPW
GFTWRST83SNAPAL
GFTWRST83SNAPBK
GFTWRST83SNAP
GFTWRST83SNAPGY
GFTWRST83SNAPI
GFTWRST83SNAPLA
GFTWRST83SNAPR
GFTWRST83SNAPW
Right Angle Pigtailed Terminal Type Catalog Number
Clear right angle terminal with 6 inch leads,
600V, #12 AWG THHN/THWN-2,
Polycarbonate housing material.
Solid
Stranded
SNAP1RA
SNAP2RA
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
GFTWRST82AL
GFTWRST83GYU
GFTWRST82BKIG
GFTWRST83SNAPI
SNAP1RA
www.hubbell-wiring.comL-16 Wiring Device-Kellems
®
4.30" sq.
(109.2)
3.02"
(76.7)
3.38" (85.9)
.92"
(23.4)
.1"
(2.5)
HBL420HS
1.23"
(31.2)
1.13"
(28.7)
1.30"
(33.0)
3.28"
(83.3)
2.62"
(66.5)
1.75"
(44.5)
HBL8362ISA
2.62"
(66.5)
1.75"
(44.3)
3.31"
(84.0)
SNAP8362GYS
1.33"
(33.8)
Hospital Grade Circuit Guard® Receptacles
Description Color Catalog Number
SNAPConnect® Tamper-Resistant,
surge supression receptacle,
smooth face, duplex. Requires connector
on page L-15, sold separately.
Blue
Gray
Ivory
Light Almond
Red
White
SNAP8262S
SNAP8262GYS
SNAP8262IS
SNAP8262LAS
SNAP8262RS
SNAP8262WS
SNAP8362S
SNAP8362GYS
SNAP8362IS
SNAP8362LAS
SNAP8362RS
SNAP8362WS
Surge suppression receptacles with
light and alarm, 240 joules/15000A
per mode.
Almond
Blue
Gray
Ivory
Red
White
HBL8262ALSA
HBL8262SA
HBL8262GYSA
HBL8262ISA
HBL8262RSA
HBL8262WSA
HBL8362ALSA
HBL8362SA
HBL8362GYSA
HBL8362ISA
HBL8362RSA
HBL8362WSA
Isolated ground, surge suppression
receptacles with light and alarm,
240 joules/15000A per mode.
Blue
Gray
Ivory
Orange
Red
White
IG8262SA
IG8262GYSA
IG8262ISA
IG8262OSA
IG8262RSA
IG8262WSA
IG8362SA
IG8362GYSA
IG8362ISA
IG8362OSA
IG8362RSA
IG8362WSA
4-PLEX® surge suppression receptacles
with lights, 80 joules/6500A per mode.
Blue
Ivory
Red
–
–
–
HBL420HS
HBL420HIS
HBL420HRS
Note: See page Tech-10 for Tamper-Resistant description.
4-PLEX® Accessories
Description Color Catalog Number
4-PLEX Adapter Plates for 1- and 2-gang,
and 4 in. (101.6) square device boxes.
Blue
Ivory
Red
HBL4APBL
HBL4API
HBL4APR
4-PLEX Portable Box. Portable 4 in. (101.6)
square box with cord grip. Accepts up to
.66 in. (16.8) diameter cord.
Ivory HBL4PBI
Note: 4-PLEX Box is not UL Listed.
Metallic Power Strip Surge Protected
Description Catalog Number
15A 125V power strip with ltering, surge protection, 3 hospital grade duplex receptacles,
6 foot power supply cord and hospital grade plug.
HBL6PSHG
Note: See section M for additinal information on surge protection products.
Wallplates (Sold Separately)
Conguration
High-Impact Nylon
Plated Steel
Stainless Steel (S/S)
BrassColor Standard Mid-Size
1-Gang
Almond
Blue
Blue
Gray
Ivory
Ivory
Off. White
Orange
Red
White
NP26AL
–
–
NP26GY
–
NP26I
NP26OW
NP26OIG**
NP26R
NP26W
NPJ26AL
NPJ26CBL*
NPJ26BL
NPJ26GY
NPJ26C*
NPJ26I
NPJ26OW
–
NPJ26R
NPJ26W
Chrome
Brass
Plated
SCH26
SBP26
Smooth S/S
Smooth S/S
Smooth Brass
SS26
SSJ26
SB26
Note: *Premarked “COMPUTER ONLY.” Lettering is block ¼" high.
**Premarked “ISOLATED GROUND.” Lettering is block ¼" high.
Jumbo size plate.
See page A-62 for technical information on 4-PLEX devices.
Hospital Products
Surge Protection Devices
15 and 20 Ampere, 125 Volts AC 60 Hz
HBL6PSHG
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
4.78"
(121.4)
1.75"
(44.5 )
3.38"sq. (85.9)
.19" (4.8)
.38" (9.7)
HBL4API
3.28"
(83.3)
2.75"
(69.9)
Dimensions in Inches (mm)
UL 1449
3rd Edition
L-17www.hubbell-wiring.com Wiring Device-Kellems
®
24352
Low-profile style explosion-pr
oof
r
eceptacle (now discontinued).
HBL24300RKD
Duplex retrofit kit accepts
20A duplex straight blade hospital grade
receptacles (HBL8300, HBL8300I, IG8300, etc.).
Order receptacles separately.
HBL24300RKS
Single retrofit accepts hospital only
Hubbellock single r
eceptacles (Hubbell HBL23000HG)
or 20A single straight blade hospital grade receptacles
(Hubbell HBL8310, HBL8310I, IG8310, etc.).
Order receptacles separately.
Explosion Proof Plug
Description Catalog Number
Plug, with, epoxy kit, accepts #12 or #14 type SO cable. HBL24312
Hazardous to Non-hazardous Location Receptacle Conversion Kits
Conversion kits for replacement of explosion proof receptacles listed above, with non-explosion proof receptacles,
in the hospital areas formerly classied as hazardous locations and now classied non-hazardous locations due to
the change from ammable anesthetizing gases to nonammable anesthetizing gases.
For Conversion To: Catalog Number
20A, 125V, duplex receptacle (Hubbell HBL830 Series). Includes adapter ring and
stainless steel wall plate for duplex receptacle (receptacle not included).
HBL24300RKD
20A, 125V, Hospital Hubbellock receptacle (Hubbell HBL23000HG) or 20A, 125V,
straight blade single receptacle (Hubbell HBL8310 series). Includes adapter ring
and stainless wall plate for single receptacle ( receptacle not included.
HBL24300RKS
Hospital Products
Hubbellock® Plugs, Connector Bodies and Receptacles
20 Ampere, 125 Volts AC only, 2 Pole, 3 Wire Grounding
Hubbellock® Plugs and Connector Bodies
Description Plugs Connector Bodies
Nylon cover, thermoset interior. HBL23014HGB HBL23001HGB
Armored, epoxy lled, rubber cord grip. HBL23004HG –
Note: Cord clamp range for plug and connector .300" to .660" (7.6 to 16.8).
Receptacles
Description Catalog Number
Black, back wired. – HBL23000HG
Wallplates
Description Catalog Number
Stainless steel 302/304, single-gang. HBL23901HG
Stainless steel 302/304, three-gang for two receptacles. HBL23909HG
Note: Suffix HG or HGB type for hospital use only.
20A 125V AC
+
20A 125V AC
20A 125V AC
IP30
SUITABILITY
For Hospital Use Only
Dimensions in Inches (mm)
www.hubbell-wiring.comL-18 Wiring Device-Kellems
®
Hospital Products
Hubbellock® Mobile X-Ray Devices
50 and 60 Ampere, 250 Volts AC, 2 Pole, 3 Wire Grounding
Mobile X-Ray Plugs
Description Catalog Number
Plug, with epoxy kit, less cord clamp. HBL25515 HBL25615
Plug, with cord clamp, less epoxy kit. HBL25525 HBL25625
Note: Cord clamp range of plugs with cord clamps .830" to 1.3" (21.1 to 33.0).
50A plugs fit 50A or 60A receptacles.
Mobile X-Ray Receptacles
Description Catalog Number
Receptacle with stainless steel plate assembly. HBL25505 HBL25605
Receptacle with cast aluminum plate assembly. HBL25503 HBL25603
Replacement receptacle interior. – IN16494
Accessory
Description Catalog Number
Box stamped steel 8" x 8" x 4" (203.2 x 203.2 x 101.6),
accommodates 50A and 60A mobile X-ray receptacles.
Knockout sizes 1¼", 1½" and 2".
HBL25509
60A 250V AC
50A 250V AC
50A 250V AC 60A 250V AC
IP30
SUITABILITY
Dimensions in Inches (mm)
L-19www.hubbell-wiring.com Wiring Device-Kellems
®
Hospital Products
Technical Information
HBL8200GY
HBL® Extra Heavy Duty, Straight Blade
Hospital Grade Duplex Receptacles
Specifications
Receptacles Part Description
Typical Specification – Catalog No. HBL8200 Receptacle 15A
Manufacturer’s Identification – Hubbell HBL8200 Top PBT*
Description – Hospital Grade, Straight Blade Duplex Receptacle Base RTP**
Type – 2 Pole, 3 Wire, Grounding By-Pass Power Contacts .037 in. (.9) Brass – Nickel Finish
Rating – 15A, 125V Clamping Plate .031 in. (.8) Brass – Nickel Finish
Certification: UL Listed to UL 498 File E2186, Fed. Spec. WC596, Mounting Strap .050 in. (1.3) Brass – Nickel Finish
Hospital Grade, NEMA® WD-6 Compliant Line Terminal Screws #10-32 Silicone Bronze, Multiple Drive
Certified to CSA, C22.2, No. 42 File 285 Hex Head Grounding Screw #10-32 (Green) Silicon Bronze, Multiple Drive
Center Assembly Rivet Silicon Bronze
Automatic Self-Grounding Clip Stainless Steel
Flat Head Mounting Screws Stainless Steel
Performance
Electrical
Dielectric Voltage Withstands 2,000V minimum.
Max. Working Voltage 125V or 250V as rated.
Current Interrupting Certified for current interrupting at full rated current.
Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification Terminals identified in accordance with UL 498 and CSA (Brass, White, Green).
Terminal Accommodation #14-10 AWG stranded or solid copper conductor only.
Product Identification Ratings are a permanent part of the device.
Environmental – Material
Flammability UL 94V-0 and UL 94-5 VA.
Operating Temperature Maximum continuous 75°C; minimum -40°C (w/o impact).
Note: *Polybutylene Terephthalate.
**Reinforced Thermoplastic Polyester.
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
www.hubbell-wiring.comL-20 Wiring Device-Kellems
®
Hospital Products
Technical Information
GREEN DOT ON
HOSPITAL GRADE ONLY
2.63"
(66.73)
3.28"
(83.34)
1.64"
(41.77)
.24"
(6.10)
.86"
(21.92)
1.25"
(31.8)
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
SNAP2182ASNAP8200WA
SNAPConnect® Straight Blade
Hospital Grade Duplex Receptacles
Specications
Receptacle Part Description
Typical Specification – Catalog No. SNAP8200 Receptacle 15A
Manufacturer’s Identification – Hubbell SNAP8200 Top Nylon
Description – Straight Blade Duplex Receptacle Base Nylon
Type – 2 Pole, 3 Wire, Grounding Triple Wipe Power Contacts Brass
Rating – 15A, 125V Mounting Strap Galvanized Steel; Brass (HG)
Certification – UL Listed to UL 498 Automatic Self-Grounding Clip Stainless Steel
Fed. Spec. WC596, Certified to CSA 22.2, No. 42 Flat Head Mounting Screws Steel-Zinc Plated/Self Tapping
Connector Contact Connector Body Wire
SNAP1RA Brass Clear Polycarbonate 6" Solid copper #12 AWG THHN/THWN-2 600V, T90 Nylon FT-1, PVC 90°C (min).
SNAP2RA Brass Clear Polycarbonate 6" Stranded copper #12 AWG THHN/THWN-2 600V, T90 Nylon FT-1, PVC 90°C (min).
Performance
Electrical
Dielectric Voltage Withstands 2,000V minimum.
Max. Working Voltage 125V as rated.
Current Interrupting Receptacle certified for current interrupting at full rated current with equivalently
rated NEMA® plug.
Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated DC current.
Mechanical
Terminal Wire Leads Identification Terminal wire leads identified in accordance with UL 498 (Black, White, Green).
Product Identification Ratings are a permanent part of the device.
Environmental – Material
Flammability UL 94V-2.
Operating Temperature Maximum continuous 75°C; minimum -40°C (without impact).
Dimensions
L-21www.hubbell-wiring.com Wiring Device-Kellems
®
Hospital Products
Technical Information
8200REDLTRA 2182IVLTRA
Hubbell-PRO Heavy Duty, Straight Blade
Hospital Grade Duplex Receptacles
Specications
Receptacle Part Description
Typical Specification - Catalog No. 8200 Receptacle 15A
Manufacturer's Identification - Hubbell-PRO 8200 Top Nylon
Description - Straight Blade Hospital Grade Duplex Receptacle Base Nylon
Type - 2 Pole, 3 Wire, Grounding Triple Wipe Power Contacts .0295 in. Brass
Rating - 15A, 125V (also 20A, 125V) Clamping Plate Plated Steel
Certification - UL Listed to UL 498, Fed. Spec. WC596 Mounting Strap .040 in. Galvalized Steel
Hospital Grade, NEMA® WD-6 Compliant Terminal Screws Plated Steel
Certified to CSA Hex Head Grounding Screw Plated Steel
Automatic Self-Grounding Staple Stainless Steel
Mounting Screws Zinc Plated Steel
Performance
Electrical
Dielectric Voltage Withstands 2,000V minimum.
Max. Working Voltage 125V.
Current Interrupting Certified for current interrupting at full rated current.
Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification Terminals identified in accordance with UL 498 and CSA (Brass, White, Green)
Terminal Accommodation #14-10 AWG stranded or solid copper conductor only.
Product Identification Ratings are a permanent part of the device.
Environmental – Material
Flammability UL 94V-2.
Operating Temperature Maximum continuous 75°C; minimum -40°C (w/o impact).
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
www.hubbell-wiring.comL-22 Wiring Device-Kellems
®
USB Charger Tamper-Resistant, Straight Blade
Hospital Grade Duplex Receptacles
Specications
USB Charger Receptacle Part Description
Typical Specification - Catalog No. USB8300 Charger Receptacle
USB 3.8 Amp 5V DC, Electrical 15 or 20 Amp 125V AC
Manufacturer's Identification - Hubbell USB8300
USB Charger Ports Type A, 2.0
LED Green Indicator
Receptacle Top Nylon
Description - Hospital Grade, Straight Blade Duplex Receptacle Base Nylon
Type - 2 Pole, 3 Wire, Grounding Triple Wipe Power Contacts .030 in. Cooper Alloy
Rating - 15 or 20 Amp, 125V AC, USB 3.8 Amp, 5V DC Clamping Plate Plated Steel
Mounting Strap .040 in. Galvanized Steel
Certification – cULus Listed to UL498 and UL1310 Terminal Screws Plated Steel
Hospital Grade, NEMA® WD-6 Compliant (USB8200 and Hex Head Grounding Screw Plated Steel
8300 series only) Automatic Self-Grounding Staple Stainless Steel
Complies with battery charging specification USB BC1.2 Mounting Screws Zinc Plated Steel
Complies with Part 15 of the FCC rules
Compatible with USB 1.1/2.0/3.0 devices, including Apple products
Performance
Electrical
Dielectric Voltage Withstands 2,000V minimum.
Max. Working Voltage 125V.
Current Interrupting Certified for current interrupting at full rated current.
Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
USB Port Stainless Steel Rated for 10,000 plug insertions and removal
Terminal Identification Terminals identified in accordance with UL 498 and CSA (Brass, White, Green)
Terminal Accommodation #14-10 AWG stranded or solid copper conductor only.
Product Identification Ratings are a permanent part of the device.
Circuit Feed-Through 20 Amp 125 Volt
Environmental – Material
Flammability UL 94V-2.
Operating Temperature Maximum continuous 75°C; minimum -40°C (w/o impact).
USB8300R
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
Hospital Products
Technical Information
L-23www.hubbell-wiring.com Wiring Device-Kellems
®
Insulgrip® Plugs and Connectors
Hospital Grade
Specications
Plug Part Description
Typical Specication—Catalog No. HBL8215C Plug 15A
Manufacturer’s Identification—Hubbell HBL8215C Plug Housing Nylon— Black
Description—Hospital Grade Straight Blade Plug Blade Holder Nylon— Natural
Type—2 Pole, 3 Wire, Grounding Retainer Polycarbonate—Clear
Rating— 15A, 125V Cord Clamp Nylon—Natural
Certification—UL Listed, CSA Certified Contact Blades .060 in. (1.5) Brass
UL Verified to Fed. Spec. WC596 Ground Contact Blade .040 in. (1.0) Brass
IP Suitability—IP20 Line Terminal Screws #8-32 Brass, Multiple Drive
Ground Screw #8-32 Brass, Multiple Drive (Green)
Wire Clamps .080 in. (2.0) Steel—Nickel Finish
Connector Part Description
Typical Specification—Catalog No. HBL8219 Connector 15A
Manufacturer’s Identification—Hubbell HBL8219C Connector Housing Nylon—Black
Description—Hospital Grade Straight Blade Connector Body Contact Holder Nylon— Natural
Type—2 Pole, 3 Wire, Grounding Retainer Polycarbonate—Clear
Rating—15A, 125V Cord Clamp Nylon—Natural
Certification—UL Listed, CSA Certified Contacts .040 in. (1.0) Copper Alloy
UL Verified to Fed. Spec. WC596 Line Terminal Screws #8-32 Brass, Multiple Drive
IP Suitability—IP20 Ground Screw #8-32 Brass, Multiple Drive (Green)
Wire Clamps .080 in. (2.0) Steel—Nickel Finish
Performance
Electrical
Dielectric Voltage Withstands 2000V AC minimum.
Max. Working Voltage 125V or 250V as rated.
Current Interrupting Certied for current interrupting at full rated current.
Temperature Rise Max 30°C temperature rise at full rated current after 100 cycles of overload at
150% of rated voltage DC.
Mechanical
Terminal Identication Terminals identied in accordance with UL and CSA (Brass, White, and Green).
Terminal Accommodation #18-10 AWG.
Product Identication Ratings are a permanent part of the device.
Torque Range Cord clamp/terminal screws 9 to 12 in-lbs.
Cord Diameter Range .230"-.720" (5.8-18.3) Integral cord grip.
Enviromental-Material
Flammability UL 94HB or better.
Operating Temperature Maximum continuous 75°C, minimum -40°C (w/o impact)
Note: Please consult the factory for product dimensions and specifications for other products listed in this catalog.
Hospital Products
Technical Information
HBL8215C HBL8219C
www.hubbell-wiring.comL-24 Wiring Device-Kellems
®
Valise® Plugs and Connectors
Hospital Grade
Specications
Plug Part Description
Typical Specication—Catalog No. HBL8115V Plug 15A
Manufacturer’s Identication—Hubbell HBL8115V Plug Housing Nylon
Description—Hospital Grade Straight Body Plug Contact Blades Brass
Type— 2 Pole, 3 Wire, Grounding Ground Blade Brass
Rating—15A, 125V Terminal Screws Multiple Drive
Certications—UL Listed to UL498 Cable Inserts Polyphenylene Oxide
File E1706, CSA Certied to C22.2 Terminal Clamps Plated CR Steel
No. 42 File LR280. Fed. Spec. WC596 Body Holding Screws Multiple Drive
IP Suitability—IP20
Connector Part Description
Typical Specication—Catalog No. HBL8119V Connector 15A
Manufacturer’s Identications—Hubbell HBL8119V Connector Body Housing Nylon
Description—Hospital Grade Straight Connector Body Contact and Ground Spring Brass
Type—2 Pole, 3 Wire, Grounding Terminal Screws Multiple Drive
Rating—15A, 125V Cable Inserts Polyphenylene Oxide
Certications—UL Listed to UL498 Terminal Clamps Plated CR Steel
File E1706, CSA Certied to C22.2 Body Holding Screws Multiple Drive
No. 42 File LR280. Fed. Spec. WC596
IP Suitability—IP20
Performance
Electrical
Dielectric Voltage Withstands 2000V AC minimum.
Max. Working Voltage 125V or 250V as rated.
Current Interrupting Certied for current Interrupting at full rated current.
Temperature Rise Max. 30°C temperature rise at full rated current.
Mechanical
Terminal Identication Terminals identied in accordance with UL and CSA (Brass, White, and Green)
Terminal Accommodation #16 to #12 AWG.
Product Identication Ratings are a permanent part of the device.
Torq ue Terminal screws 12 in.-lbs. Cord clamp screws 7 to 10 in.-lbs.
Cord Diameter Range .300" to .660" (7.6 to 16.8)
Enviromental-Material
Flammability UL 94HB
Operating Temperature Maximum continuous 75°C, minimum -40°C (w/o impact).
Standards
NEMA® Congurations WD6.
Listed to UL Standard UL498 and UL Veried to Ped. Spec. WC596.
Certied to CSA Standard C22.2 No. 42.
Hospital Products
Technical Information
HBL 8115V HBL8119V
NEMA® is a registered trademark of the National Electrical Manufacturers Association.

Navigation menu