1000437434 Catalog

2016-09-04

: Pdf 1000437434-Catalog 1000437434-Catalog B4 unilog

Open the PDF directly: View PDF PDF.
Page Count: 15

BURNDY®
Blue highlighted items are industry standard and most frequently ordered.
Canada: 1-800-387-6487 www.burndy.com US: 1-800-346-4175
Compression Connections
U Die and W Die Sets
12-TON U DIES*
BURNDY® Die Sets
Fits Y35, Y39, Y750 Series,
PAT750-18V Series,
PAT46-18V, Y46
(W/PUADP-1 Adapter)
Wire Size Copper Aluminum
Small #8 Str. U8CRT U8CABT
#6 , #5 Str. U5CRT U6CABT
#4 Str. U4CRT U4CABT
#3 Str. U3CRT N/A
#2 Str. U2CRT U2CABT
#1 Str. U1CRT-1 U1CART
1/0 Str. U25RT U25ART
2/0 Str. U26RT U26ART
3/0 Str. U27RT U27ART
4/0 Str. U28RT U28ART
250 kcmil U29RT U29ART
U die case Part# PT29291, holds up to 15 dies
* Non-tension U-type 12-ton dies for YA, YS, YA-A,
YS-A style connectors.
NOTE: N/A = not applicable.
W DIES
BURNDY® Die Sets
Fits Tools MD6, MD7, Y500CTHS,
PAT600-18V, PATMD6
Wire Size Copper Copper Aluminum
Small #8 W8CVT W8CRT X8CART
#6 W5CVT W5CRT W161
#4 W4CVT W4CRT W162
#3 W3CRT W3CRT N/A
#2 W2CVT W2CRT W239
#1 W1CVT W1CRT W163
1/0 W25VT W25CRT W241
2/0 W26VT W26CRT W245
3/0 W27VT W27CRT W166
4/0 W28VT W28CRT W660
250 *W29VT W29CRT N/A
300 *W30VT W30CRT N/A
350 *W31VT W31CRT *W31ART
400 *W32VT W32CRT N/A
450 W33VT W33CRT N/A
500 *W34VT W34CRT N/A
Large 600 **W36RT W36CRT N/A
Wire Size Copper Aluminum
300 kcmil U30RT U30ART
350 kcmil U31RT U31ART
400 kcmil U32RT U32ART
500 kcmil U34RT U34ART
535 Flex kcmil U38XRT N/A
600 kcmil U36RT U36ART
750 kcmil U39RT U39ART2
Large 777 Flex U44XRT N/A
* These sizes (250-500) for Y5000CTHS,
MD7-34(R), BAT500, BCT500HS only.
** For PAT600-18V only.
NOTE: N/A = not applicable.
Suitable for use on YA, YS, YA-A, YS-A type
non-tension connectors.
W die case Part# CASEWDIES, holds up to 24 dies
C-9
BURNDY®
Blue highlighted items are industry standard and most frequently ordered.
US: 1-800-346-4175 www.burndy.com Canada: 1-800-387-6487
TYPES YBA-A
BREAK-AWAY HYLUG™
Copper and Aluminum
Compression Terminals
UL Listed 90° C,
600 Volts to 35 kV
The Break-Away HYLUG™ line of Copper and
Aluminum
terminals are
designed to provide
maximum eld exibility by allowing the installer
(using the break-away feature) to easily convert a
two-hole terminal into a one-hole terminal to suit
the application.
The Break-Away HYLUG™ line of terminals
encompasses a wide range of features that offers
the installer the exibility to meet the requirements
of challenging projects.
Features & Benets
• Break-Away feature allows for eld
modication of the terminal from a two-hole
design to a one-hole design while retaining
UL Listing and CSA Certication
• Field modication of the terminal does not
require specialized tooling or training
• Stud size is 1/2″ on the rst stud as well as
the slotted second stud
• Narrow tongue design allows for the
terminal to t into tight spaces
• Slotted second stud provides built in
exibility for the terminal to conform to
various bus bar dimensions. With the
slotted second stud the terminal can be
used on two-hole spacing ranging from
1.75″ down to 1.00″ for 1/2″ stud size
• Break-Away HYLUG™ line of terminals
can be installed with standard BURNDY®
tooling such as PAT750XT-18V and U-Dies
• Terminals are range taking when installed
with Y644 or PAT644XT-18V tooling
platforms
Catalog
Number
Conductor
Size
(Concentric
and Compact)
Dimensions Installation Tooling (# of crimps)
Stud
Hole
Spacing
Stud
Hole
Size
Tongue
Width B T L Dieless
MD6,
MD7,
MD7-34R
platforms
OUR840**
Y500CTHS,
PAT60018V,
PATMD6
platform
Y35, Y39,
Y750, *Y46,
PAT750,
*PAT46
platforms
Color
Code
Die
Index
YBA25A 1/0 1" to 1.75"1/2" [12] 1.03"1.05"0.17"4.59"MY29 (MY29
platform tools can
only be used on
Code Conductor),
PAT644XT-18V &
Y644 platforms (1),
4-POINT®
Y81KFT, PAT81KFT,
Y4PC, PAT4PC
platforms (2)
W241 (2)
X241 (4) W241 (2) U25ART (1) Tan 296
YBA26A 2/0 1" to 1.75"1/2" [12] 1.03"1.17"0.20"4.78"— — U26ART (2) Olive 297
YBA27A 3/0 1" to 1.75"1/2" [12] 1.04"1.31"0.26"5.02"— — U27ART (2) Ruby 467
YBA28A 4/0 1" to 1.75"1/2" [12] 1.17"1.39"0.30"5.19"W660 (4)
X660 (8) W660 (4) U28ART (2) White 298
YBA29A 250 kcmil 1" to 1.75"1/2" [12] 1.26"1.45"0.33"5.28"PAT644XT-18V &
Y644 platforms (1),
4-POINT® Y81KFT,
PAT81KFT, Y4PC,
PAT4PC
platforms (2)
— — U29ART (2) Red 324
YBA30A 300 kcmil 1" to 1.75"1/2" [12] 1.38"1.53"0.36"5.64"— — U30ART (2) Blue 470
YBA31A 350 kcmil 1" to 1.75"1/2" [12] 1.52"1.85"0.39"6.07"
PAT644XT-18V &
Y644 platforms (1),
4-POINT® Y81KFT,
PAT81KFT, Y4PC,
PAT4PC
platforms (4)
— — U31ART (2) Brown 299
YBA32A 400 kcmil 1" to 1.75"1/2" [12] 1.62"2.26"0.43"6.15"— — U32ART (4) Green 472
YBA34A 500 kcmil 1" to 1.75"1/2" [12] 1.62"2.34"0.46"6.80"— — U34ART (4) Pink 300
YBA36A 600 kcmil 1" to 1.75"1/2" [12] 1.31"2.47"0.52"7.09"— — U36ART (4) Black 473
YBA39A 700 & 750 kcmil 1" to 1.75"1/2" [12] 1.62"2.46"0.43"7.07"— — U39ART-2 (2) Yellow 936
YBA42A 600 - 900 kcmil 1" to 1.75"1/2" [12] 1.62"2.46"0.39"7.15"— — U42ART (4)^Gray 303
YBA44A 1000 kcmil 1" to 1.75"1/2" [12] 1.65"2.74"0.55"7.76"Y644HSXTBH (1) — — P44ART† (4) Brown 302
† Can only be crimped with PAT46 or Y46 platform
tools using the P44ART die
* Y46 and PAT46 platforms require PUADP-1 adaptor
to use U dies
** OUR840 can use X-style dies only
^ U die for 900 AL only
Aluminum Conductor
C-16
Compression Connections
Aluminum Compression — Break-Away
BURNDY®
Blue highlighted items are industry standard and most frequently ordered.
US: 1-800-346-4175 www.burndy.com Canada: 1-800-387-6487
E-LINE HYLUG™
EQUIPMENT LINE
TYPE YA-E
COPPER AND ALUMINUM
COMPRESSION TERMINAL
UL Listed 90° C,
600 Volts to 35 kV ♦
Catalog Number
Fig.
No.
Conductor Accommodations
Stud
Hole
Size
Stud
Hole
Spacing
Tongue
Width
(max)
Dimensions † Installation Tooling
Wire
Strip
Length
Aluminum
Copper or
Aluminum
B T L
Dieless
(number of crimps)
Hydraulic
Color
Code
Die
Index
Conventional
Wire Size
Expanded Wire
Range using
Y644HSXT
Y35, Y750,
Y46*, PAT750
(number of
crimps)
YA30A6N100T38E 1 300 kcmil 2/0 AWG - 300
kcmil
3/8" — 1.00" 1.53" 0.36" 3.20"
Y644HSXT (1)
PAT644XT-18VHS (1)
Y81KFT (2)
Y81KFTMBH (2)
PAT81KFT-18V (2)
U30ART (2) Blue 470 1-5/8
″
YA30A1N131T12E 1/2" — 1.31" 1.53"0.35" 3.57"
YA31A11N100T516E 1 350 kcmil 3/0 AWG - 350
kcmil
5/16" — 1.00" 1.85" 0.39" 3.51" U31ART (2) Brown 299 1-7/8
″
YA31A9N100T38E 3/8" — 1.00"1.85"0.39"3.59"
YA32A8N106T516E 1 400 kcmil 4/0 AWG - 400
kcmil 5/16" — 1.06" 2.26" 0.43" 3.92" U32ART (4) Green 472 2-5/16
″
YA34A8N131T38E 1500 kcmil 4/0 AWG - 500
kcmil
3/8" — 1.31" 1.64" 0.35" 3.88"
Y644HSXT (2)
PAT644XT-18VHS (2)
Y81KFT (2)
Y81KFTMBH (2)
PAT81KFT-18V (2)
U34ART (4) Pink 300
1-11/16
″
YA34A7N131T12E 1/2" — 1.31"1.64"0.35"3.88"
YA34A3N131T12E 2 1/2" 1.75 1.31"1.64"0.39" 5.71"
YA36A9N131TD12E 1
600 kcmil 250 - 600 kcmil
1/2" — 1.31" 1.64" 0.39" 3.98"
YA36A3N131TD38E 23/8" — 1.31"1.64"0.39"5.32"
YA36A3N131TD12E 1/2" 1.75 1.31"1.64"0.39"5.71"
YA39A1N131TD12E 1
750 kcmil
500 - 900 kcmil
Aluminum
500 kcmil
Copper Only
1/2" — 1.31" 1.86" 0.31" 4.28"
1-15/16
″
YA39A5N131TD12E 2 1/2" 1.75 1.31"1.86"0.31"6.09"
ALUMINUM E-LINE HYLUG™ COMPRESSION TERMINALS
† A variety of BURNDY® installation tools are available
and not all tools are listed. If you require additional
tooling information, please feel free to call our customer
service department for other recommendations.
* Use PUADP-1 adapter with U dies in Y46 HYPRESS™,
P-RT die sets for use in Y46 HYPRESS™ only.
PUADP-1 adapter not required.
** 900 Compact Aluminum Cable not UL Listed. Tested
with Y644HSXT and PAT644XT-18V dieless tools only.
Note: All dimensions shown are for reference only.
Overlap crimps when using U Dies.
Fig. 1 Fig. 2
Compression Connections
Copper and Aluminum Compression — Narrow Tongue — One and Two Hole
C-108
BURNDY®
Blue highlighted items are industry standard and most frequently ordered.
US: 1-800-346-4175 www.burndy.com Canada: 1-800-387-6487
TYPES YA-A
AND YA-A-TN
(Continued)
HYLUG™
UNINSULATED ALUMINUM
COMPRESSION TERMINAL
FOR ALUMINUM AND COPPER
CONDUCTORS
1-HOLE DESIGN
DIE AND CRIMP
INFORMATION
CABLE
ACCOMMODATION
CLOSED
BARREL
CRIMP
CRIMP
COLOR CODED
END CAP
ELECTRO-TIN
PLATED
UL Listed 90° C,
600 Volts to 35 kV ♦
Catalog
Number
Code
Conductor •
Stud
Size
No. of
Holes
in Pad
Dimensions Installation Tooling ▲
Wire
Strip
LengthC D L N T Z
Dieless (# of crimps) Y35, Y39, Y750, Y46* ▲
Die
Index
Mechanical
Tooling
Hydraulic
HYPRESS™
Die Number
(# of crimps)
Color
Code
YA2CA5
2AWG
1/4 1 0.50 0.75 2.25 0.33 0.22 0.42
MY29-3 (1)
MRC840AL (1)
Y81KFT (2)
Y81KFTMBH (2)
Y644HSXT (1)
PAT81KFT-18V (2)
U2CABT (1) Pink 348 1-1/8″YA2CA1 5/16 1 0.88 0.88 2.50 0.41 0.16 0.47
YA2CA3 3/8 1 0.88 0.94 2.56 0.44 0.16 0.50
YA1CA1 1 AWG 3/8 1 0.76 1.19 2.59 0.44 0.19 0.75 U1CART (1) Gold 471 15/16″
YA25A1
1/0
5/16 1 0.60 0.87 2.31 0.41 0.21 0.46
U25ART (1) Tan 296 1-1/16″YA25A3 3/8 1 0.82 1.18 2.67 0.63 0.21 0.55
YA25A9 1/2 1 1.03 1.34 2.83 0.63 0.17 0.71
YA26A6 2/0 AWG 3/8 1 0.67 1.89 2.79 0.44 0.24 0.74
MY29-3 (2)
MRC840AL (2)
U26ART (2) Olive 297 1-3/8″
YA26A1 1/2 1 1.03 1.36 3.03 0.63 0.20 0.73
YA27A1 3/0 AWG 3/8 1 0.73 1.18 2.88 0.44 0.26 0.74 U27ART (2) Ruby 467 1-1/2″
YA27A3 1/2 1 1.04 1.37 3.27 0.63 0.26 0.74
YA28A1 4/0 AWG 3/8 1 1.17 1.18 3.26 0.44 0.30 0.74 U28ART (2) White 298 1-5/8″
YA28A3 1/2 1 1.17 1.36 3.44 0.63 0.30 0.73
YA29A9 250 kcmil 3/8 1 1.26 0.83 3.09 0.41 0.33 0.42
—
U29ART (2) Red 324 1-9/16″
YA29A1 1/2 1 1.26 1.36 3.53 0.63 0.33 0.73 1-5/8″
YA30A6 300 kcmil 3/8 1 1.38 1.37 3.90 0.63 0.36 0.74 U30ART (2) Blue 470 1-3/4″
YA30A1 1/2 1 1.38 1.37 3.90 0.63 0.36 0.74
YA31A1 350 kcmil 1/2 1 1.52 1.37 4.33 0.63 0.39 0.74 —
Y644HSXT (1)
Y81KFT (3)
Y81KFTMBH (3)
PAT81KFT-18V (3)
U31ART (2) Brown 299 2-1/8″
YA32A9 400 kcmil 3/8 1 1.62 0.83 3.95 0.41 0.43 0.42
—
Y644HSXT (1)
Y81KFT (4)
Y81KFTMBH (4)
PAT81KFT-18V (4)
PAT644XT-18V (2)
U32ART (4) Green 472 2-5/16″
YA32A1 5/8 1 1.62 1.88 4.92 0.88 0.43 1.00 2-1/2″
YA34A1 500 kcmil 5/8 1 1.80 1.91 5.56 0.88 0.46 1.03 U34ART (4) Pink 300 2-5/8″
YA36A1 600 kcmil 5/8 1 1.97 1.88 5.82 0.88 0.52 1.00 Black 473 2-7/8″
YA39A1 700-750 kcmil
900 Compact
AL+
1/2 1 2.05 1.34 5.26 0.63 0.43 0.71
U39ART-2 (4) Yellow 936 2-7/8″YA39A3 5/8 1 2.05 1.88 5.80 0.88 0.43 1.00
YA39A34 700-750 kcmil 3/4 1 2.05 2.19 6.17 1.00 0.43 1.19
YA40A1 800 kcmil 5/8 1 1.65 1.87 6.12 0.88 0.60 0.99 Y644HSXTBH (1) P40ART (4) Gray 474 3"
YA42A1 900 kcmil AL
600 kcmil CU
1/2 1 2.14 1.36 5.32 0.63 0.39 0.71 Y644HSXT (2)
Y644HSXTBH (2)
PAT644XT-18V (2)
U42ART (4)
^
Gray 303 2-7/8″
YA42A3 5/8 1 2.14 1.36 5.32 0.63 0.39 1.00
YA44A1 1000 kcmil 5/8 1 2.50 1.89 6.50 0.88 0.66 1.01 — P44ART** (4) Gray 474 3″
AL9CU
• Contact BURNDY® for conductor, stud sizes and hole
drillings not shown.
▲ See tooling section of this catalog for complete tool and
die listings.
* Use PUADP-1 adaptor with U dies in Y46 HYPRESS™.
** P44ART for use with Y46 HYPRESS™ only. PUADP-1
adapter not required.
+ Tested with Y644HSXT and PAT644 dieless tools only
and not UL Listed with any tool on 900 Compact Al.
♦ For applications greater than 2000 Volts consult cable
manufacturer for voltage stress relief instructions.
^ U die for 900 AL only
Note: All dimensions shown are for reference only.
Compression Connections
Aluminum Compression — Tin Plated — For Aluminum & Copper Conductors
C-144
BURNDY®
Blue highlighted items are industry standard and most frequently ordered.
US: 1-800-346-4175 www.burndy.com Canada: 1-800-387-6487
TYPE YA-A
HYLUG™
UNINSULATED ALUMINUM
COMPRESSION TERMINAL
FOR ALUMINUM AND
COPPER CONDUCTORS
2-HOLE AND 4-HOLE DESIGNS
UL Listed 90° C,
600 Volts to 35 kV ♦
Catalog
Number
Code
Conductor
●
Stud
Size
●
No. of
Holes
in Pad
Dimensions Installation Tooling ▲
Wire
Strip
LengthC D
E
&
F L N
T
REF.
Z
MIN.
Dieless (# of crimps) Y35, Y39, Y750, Y46* ▲
Die
Index
Mechanical
Tooling
Hydraulic
HYPRESS
Die Number
(# of crimps)
Color
Code
YA2CA9 2 str. 1/2 2 0.88 3.11 1.75 4.73 0.63 0.16 0.73 MY29-3 (1)
Y644HSXT (1)
Y81KFT (1)
Y81KFTMBH (1)
PAT81KFT-18V (1)
U2CABT (1) Pink 348 1-1/8″
YA25A5 1/0 str 3/8
2
0.82 2.24 1.06 3.73 0.63 0.21 0.55 MY29-3 (1)
Y644HSXT (1)
Y81KFT (2)
Y81KFTMBH (2)
PAT81KFT-18V (2)
U25ART (1) Tan 296 1-1/16″
YA25A7 1/2 1.03 3.10 1.75 4.59 0.63 0.17 0.72
YA26A3 2/0 str. 1/2 1.03 3.11 1.75 4.78 0.63 0.20 0.73
MY29-3 (2)
U26ART (2) Olive 297 1-3/8″
YA26A5 3/8 0.92 1.89 1.00 3.56 0.44 0.24 0.45
YA27A5 3/0 str. 1/2 1.04 3.12 1.75 3.02 0.63 0.26 0.74 U27ART (2) Ruby 467 1-1/2″
YA27A7 3/8 1.04 1.89 1.00 3.79 0.44 0.26 0.45
YA28A5 4/0 str. 1/2 1.17 3.11 1.75 5.19 0.63 0.30 0.73 U28ART (2) White 298 1-5/8″
YA28A7 3/8 1.17 1.89 1.00 3.97 0.44 0.30 0.45
YA29A3 250 kcmil 1/2 1.26 3.11 1.75 5.28 0.63 0.33 0.73
—
U29ART (2) Red 324 1-5/8″
YA29A5 3/8 1.26 1.89 1.00 4.06 0.44 0.33 0.45
YA30A3 300 kcmil 1/2 1.38 3.11 1.75 5.64 0.63 0.36 0.73 U30ART (2) Blue 470 1-3/4″
YA30A5 3/8 1.38 1.89 1.00 4.42 0.44 0.36 0.45
YA31A5 350 kcmil 3/8
2
1.52 1.89 1.00 4.85 0.44 0.39 0.45
—
Y644HSXT (1)
Y81KFT (3)
Y81KFTMBH (3)
PAT81KFT-18V (3)
U31ART (2) Brown 299 2-1/8″
YA31A3 1/2 1.52 3.11 1.75 6.07 0.63 0.39 0.73
YA32A5 400 kcmil 3/8 1.62 1.89 1.00 4.93 0.44 0.43 0.45 U32ART (4) Green 472 2″
YA32A3 1/2 1.62 3.11 1.75 6.15 0.63 0.43 0.73
—
Y644HSXT (1)
Y81KFT (4)
Y81KFTMBH (4)
PAT81KFT-18V (4)
YA34A3 500 kcmil 1/2 1.62 3.15 1.75 6.80 0.63 0.46 0.77 U34ART (4) Pink 300 2-5/8″
YA34A5 3/8 1.80 1.89 1.00 5.54 0.44 0.46 0.45
YA36A3 600 kcmil 1/2 1.62 3.15 1.75 7.09 0.63 0.52 0.77 U36ART (4) Black 473 2-7/8″
YA36A5 3/8 1.97 1.89 1.00 5.64 0.69 0.52 0.45
YA39A5 700/750 kcmil
900 Compact
AL +
1/2 1.62 3.15 1.75 7.07 0.63 0.43 0.77 U39ART-2 (4) Yellow 936 2-7/8″
YA39A7 3/8 2.05 1.89 1.00 5.81 0.44 0.43 0.45
YA39AM2 1/2 1.69 3.12 1.75 7.31 0.63 0.57 0.74 P39ART** (4) Red 301 2-7/8″
YA40A3 800 kcmil 1/2 2 2.25 3.16 1.75 7.41 0.63 0.60 0.78 Y644HSXTBH (1) P40ART (4) Gray 474 3"
YA42A5 900 kcmil AL
600 kcmil Cu
1/2 21.62 3.13 1.75 7.09 0.63 0.39 0.77 —
Y644HSXT (2)
Y644HSXTBH (2)
PAT644XT-18V (2)
U42ART (4)^ Gray 303 2-7/8″
YA42A7 3/8 2.14 3.13 1.00 5.96 0.44 0.39 0.45
YA44A3 1000 kcmil 1/2
2
1.65 3.15 1.75 7.76 0.63 0.55 0.77
— —
P44ART** (4) Brown 302 3″
YA45A5^^ 1250 kcmil 1/2 2.59 3.12 1.75 7.73 0.63 0.51 0.74
YA46A3^^ 1500 kcmil 1/2 3.08 3.15 1.75 8.73 0.63 0.81 0.77 L46ART (2)
‡
Blue 478 2-3/4″
YA46A5^^ 1/2 4 3.08 3.15 1.75 8.73 0.63 0.81 0.77
YA48A3^^ 2000 kcmil 1/2 2 3.57 3.11 1.75 8.49 0.63 0.90 0.73 L48ART (2)
‡
Red 479 4-1/8″
• Contact BURNDY® for conductor, stud sizes and hole
drillings not shown.
▲ See tooling section of this catalog for complete tool and
die listings.
‡ Use Y60 BHU HYPRESS™ with L46ART and L48ART
die sets.
* Use PUADP-1 adaptor with U dies in Y46 HYPRESS™.
** P39ART and P44ART die sets for use with Y46
HYPRESS™ only. PUADP-1 adapter not required.
+ Tested with Y644HSXT and PAT644 dieless tools only
and not UL Listed with any tool on 900 Compact Al.
♦ For applications greater than 2000 Volts consult cable
manufacturer for voltage stress relief instructions.
^ U die for 900 AL only
^^ 75
o
C Rated
Note: All dimensions shown are for reference only.
Compression Connections
Aluminum Compression — Tin Plated — For Aluminum & Copper Conductors
AL9CU
C-146
BURNDY®
Blue highlighted items are industry standard and most frequently ordered.
Canada: 1-800-387-6487 www.burndy.com US: 1-800-346-4175
Catalog
Number
Copper &
Aluminum
Conductor
Fig.
No.
Dimensions Installation Tooling ▲
Wire
Strip
Length
A ▼
Plug
Dia.
P
Plug
Length
L
HYPLUG
Length
LL
Cover
Length
HYTOOLS Y35, Y39, Y750, Y46* ▲ Die
Index &
Embossment
Dieless Tools
(# of crimps)
+
OH25
+
MD6
Die Number
(# of crimps)
Color
Code
AYP6 6 Str. 1 0.23 0.68 1.85 2.03
MY29-3 (2) ** +
Y644HSXT (1)
Y81KFT (1)
Y81KFTMBH (1)
PAT81KFT-18V (1)
1 crimp W241 U25ART (1) Tan 296 1-1/16″
AYP4 4 Str. 1 0.23 0.68 1.85 2.03
AYP2 2 Str. 1 0.23 0.68 1.85 2.03
AYP1 1 Str. 1 0.26 0.84 2.01 2.03
AYP1/0 1/0 Str. 1 0.29 0.84 2.01 2.03
AYPO2/0 2/0 Str. 2 0.33 1.09 2.70 2.23 MY29-3 (2) ** +
Y644HSXT (1)
Y81KFT (2)
Y81KFTMBH (2)
PAT81KFT-18V (2)
— — U28ART (2) White 298 1-1/8″
AYPO3/0 3/0 Str. 2 0.37 1.22 2.80 2.23
AYPO4/0 4/0 Str. 2 0.42 1.22 2.80 2.23
AYP250 250 kcmil 1 0.47 1.22 2.63 2.54
Hydraulic:
Y644HSXT (1)
Y81KFT (2)
Y81KFTMBH (2)
PAT81KFT-18V (2)
— —
U31ART (2) Brown 299 1-1/8″
AYPO250 250 kcmil 2 0.47 1.22 2.98 2.54
AYPO300 300 kcmil 2 0.53 1.34 3.08 2.54
AYP350 350 kcmil 1 0.57 1.34 2.75 2.54
AYPO350 350 kcmil 2 0.57 1.34 3.08 2.54
AYPO400 400 kcmil 2 0.63 1.60 3.43 2.81
U34ART (2) Pink 300 1-1/8″
AYP500 500 kcmil 1 0.68 1.60 3.08 2.81
AYPO500 500 kcmil 2 0.68 1.60 3.43 2.81
AYPO600 600 kcmil 2 0.73 1.64 4.02 3.69
Y644HSXT (1)
Y81KFT (3)
Y81KFTMBH (3)
PAT81KFT-18V (3)
— — U39ART-2 (3) Yellow 936 1-3/4″
AYP750
700/750 kcmil
900 Compact
AL†
1 0.81 1.76 3.79 3.69
AYPO750
700/750 kcmil
900 Compact
AL†
2 0.81 1.76 4.16 3.69
TYPES AYP, AYPO
HYPLUG™
FOR ALUMINUM AND COPPER
CONDUCTOR
UL Listed 90° C,
600 Volts to 35 kV♦Fig 1: TYPE AYP (Straight) Fig 2: TYPE AYPO (Offset)
AL9CU
Scratch brush aluminum conductor before installation.
▲ See tooling section of this catalog for complete tool and
die listings.
** For MY29-3 use aluminum index plate at 1/0 setting for
sizes #6 through 1/0 or at 4/0 setting for sizes 2/0
through 4/0.
+ Not UL Listed with these tools.
* Use PUADP-1 adaptor with U dies in Y46 HYPRESS™.
■ Also accomodates compressed and compact conductors
(except for 700 kcmil in 750 kcmil barrel).
† Tested with Y644HSXT and PAT644XT-18V dieless tools
only and not UL Listed with any tool on 900 Compact Al.
♦ For applications greater than 2000 Volts consult cable
manufacturer for voltage stress relief instructions.
Note: All dimensions shown are for reference only.
▼ For copper equivalent wire size see page O-11
(Aluminum 1350 Cable).
Note: CSA certified for AL Conductor only.
Compression Connections
Aluminum Compression — Adaptors
AL9
C-149
BURNDY®
Blue highlighted items are industry standard and most frequently ordered.
Canada: 1-800-387-6487 www.burndy.com US: 1-800-346-4175
TYPE YS-A
(Continued)
HYLINK™
UNINSULATED ALUMINUM
COMPRESSION SPLICE
UL Listed 90° C,
600 Volts to 35 kV ♦
DIE AND COLOR
CODE INFORMATION
ELECTRO-TIN
PLATED
BELLED
END
BELLED
END
(4) CENTER
WIRE STOP
CRIMP
CRIMP
Catalog
Number
Code ●
Conductor
Dimensions
Installation Tooling ▲
Wire
Strip
Length
Dieless (# of crimps/end) Y35, ■Y39, Y750, Y46* ▲
Die Index &
EmbossmentB L
Mechanical
HYTOOL™
Hydraulic
HYPRESS™
Die Number
(# of crimps per end)
Color
Code
YS26A1 2/0 str. 1.18 2.61 MY29-3 (2)
MRC840AL (2) Y644HSXT (1)
Y81KFT (2)
Y81KFTMBH (2)
PAT81KFT-18V (2)
U26ART (2) Olive 297 1-3/8″
YS27A1 3/0 str. 1.31 2.88 U27ART (2) Ruby 467 1-1/2″
YS28A1 4/0 str. 1.40 3.06 U28ART (2) White 298 1-5/8″
YS29A1 250kcmil 1.46 3.18 MY29-3 (2) U29ART (2) Red 324 1-5/8″
YS30A1 300 kcmil 1.47 3.20 U30ART (2) Blue 470 1-3/4″
YS31A1 350 kcmil 1.89 4.04 —
Y644HSXT (1)
Y81KFT (3)
Y81KFTMBH (3)
PAT81KFT-18V (3)
U31ART (2) Brown 299 2-1/8″
YS32A1 400kcmil 2.30 4.86 —
Y644HSXT (1)
Y81KFT (4)
Y81KFTMBH (4)
PAT81KFT-18V (4)
U32ART (2) Green 472 2-1/2″
YS34A1 500 kcmil 2.38 5.02 — U34ART (2) Pink 300 2-5/8″
YS36A1 600 kcmil 2.44 5.14 — U36ART (4) Black 473 2-7/8″
YS39A1*700/750 kcmil
900 Compact Al † 2.50 5.26 — U39ART-2 (4) Yellow 936 2-7/8″
YS39AM1* 700/750 kcmil
900 Compact Al † 2.63 5.58 — P39ART** (4) Red 301 2-7/8″
YS42A1 600 - 900 kcmil 2.50 5.26 — Y644HSXT (2)
PAT644HSXT (2) U42ART (4)
^
Gray — 2-7/8″
YS44A1
^^
1000 kcmil 2.84 5.94 — — P44ART** (4) Brown 302 3″
YS45A1
^^
1250 kcmil 2.84 6.21 — — P48PR1/L44ART** (6) Brown 302 2.88″
YS46A1
^^
1500 kcmil 3.40 7.05 — — L46ART*** (2) Blue 478 3.38″
YS47A1
^^
1750 kcmil 3.99 8.31 — — L47ART*** (2) White 587 4″
YS48A1
^^
2000 kcmil 3.66 7.58 — — L48ART*** (2) Red 479 3.63″
YS483A1
^^
2250 kcmil
ALUMINUM ONLY 3.66 7.58 — — L48ART*** (2) Red 479 3.63″
▲ See tooling section of this catalog for complete tool and
die listings.
‡ UL Listed for Aluminum only. Not CSA Certified.
* Use PUADP-1 adaptor with U dies in Y46 HYPRESS™.
** P39ART and P44ART for use with Y46 HYPRESS™
only. PUADP-1 adapter not required.
■ The largest size for the Y35 is 400 kcmil.
*** Y60BHU only.
90° C Rated.
† Tested with Y644HSXT and PAT644XT-18V dieless tools
only and not UL Listed with any tool on 900 Compact Al.
● Also accommodates compressed and compact
conductors. (Except 700 kcmil in 750 kcmil barrel)
Note: All dimensions shown are for reference only.
^ U Die for 900 AL only.
^^ 75° C Rated.
Y644HSXT DIELESS HYPRESS™
RANGE-TAKING
CAPABILITIES
The following HYLINK™ splices, when
crimped with the Y644HSXT DIELESS
HYPRESS™ tool, produce the range-
taking capabilities in the table to the
right.
Aluminum Splices
Standard
Wire Size
Expanded
Wire Range
Standard
Wire Size
Expanded
Wire Range
Standard
Wire Size
Expanded
Wire Range
#6 AWG #6 AWG 1/0 AWG 1/0 - #1 AWG 250 kcmil 250 kcmil - 1/0 AWG
#4 AWG #4 - #6 AWG 2/0 AWG 2/0 - #1 AWG 300 kcmil 300 kcmil - 2.0 AWG
#2 AWG #2 - #6 AWG 3/0 AWG 3/0 - #1 AWG 350 kcmil 350 kcmil - 3/0 AWG
#1 AWG #1 - #2 AWG 4/0 AWG 4/0 - #1 AWG 400 kcmil 400 kcmil - 4/0 AWG
500 kcmil 500 kcmil - 4/0 AWG
600 kcmil 600 - 250 kcmil
750 kcmil 750 - 500 kcmil
Compression Connections
Aluminum Compression — Splice
C-151
BURNDY®
Blue highlighted items are industry standard and most frequently ordered.
US: 1-800-346-4175 www.burndy.com Canada: 1-800-387-6487
TYPE YS-AT
HIGH VOLTAGE
UNINSULATED ALUMINUM
COMPRESSION SPLICE
Type YS-AT is a high-conductivity aluminum
electro-tin plated compression butt splice with
tapered ends for high voltage applications up
to 35 kV.
The YS-AT provides the same benets as the
YS-A with the addition of tapered ends for
easy installation of high voltage insulating kits.
Tapered ends aid in preventing corona emission
and insulation breakdown. Recommended for
high voltage splice applications.
Catalog
Number
● † Code
Conductor
Dimensions
Installation Tooling ▲
Wire
Strip
Length
Y35, ■Y39, Y750, Y46*
Die Index &
Embossment ▲B L
Die
Number (Crimps per End)
Color
Code
YS2CAT 2 str. 1.58 4.00 U2CABT ( 2 ) Pink 348 2 1/4″
YS25AT 1/0 str. 1.96 4.73 U25ART ( 2 ) Tan 296 2 5/8″
YS26AT 2/0 str. 1.83 4.29 U26ART ( 3 ) Olive 297 2 3/8″
YS27AT 3/0 str. 2.04 4.69 U27ART ( 3 ) Ruby 467 2 5/8″
YS28AT 4/0 str. 2.16 5.05 U28ART ( 3 ) White 298 2 3/4″
YS29AT 250 kcmil 2.29 5.37 U29ART ( 3 ) Red 324 2 7/8″
YS30AT 300 kcmil 2.54 5.91 U30ART ( 3 ) Blue 470 3 1/8″
YS31AT 350 kcmil 2.68 6.23 U31ART ( 3 ) Brown 299 3 3/8″
YS34AT 500 kcmil 3.39 7.79 U34ART ( 6 ) Pink 300 4 1/8″
YS39AT 700/750 kcmil ●
900 Compact AL ▼ 3.69 8.57 P39ART** ( 6 ) Red 301 4 1/2″
YS44AT 1000 kcmil
900 Compact AL▼ 3.77 9.69 P44ART** ( 6 ) Brown 302 4 3/4″
Features & Benets
• Tapered ends for applications through 35kV
◊ Permits easy taping and aids in
preventing corona emission and
insulation breakdown
• Heavy wall aluminum tubing
◊ For use with combinations of
AL-AL, AL-CU, CU-CU
DIE AND CRIMP
INFORMATION COLOR CODED
END CAPS
CENTER
STOP
TAPERED
END CRIMPS
CRIMPS
PRE-FILLED WITH
PENETROX
† Contact BURNDY® for conductor sizes not shown.
* Use PUADP-1 adapter for U dies.
** P39ART and P44ART for use with Y46 HYPRESS™
only. PUADP-1 adapter not required.
■ The maximum size for the Y35 is 400 kcmil.
▲ See tooling section of this catalog for complete tool and
die listings.
● Also accommodates compressed and compact
conductors (except 700 kcmil in 750 kcmil barrel).
▼ Tested with Y644HSXT and PAT644XT-18V dieless
tools only and not UL Listed with any tool on 900
Compact Al.
Note: All dimensions shown are for reference only.
Compression Connections
Aluminum Compression — Splice — Tapered Ends
C-152
BURNDY®
Blue highlighted items are industry standard and most frequently ordered.
Canada: 1-800-387-6487 www.burndy.com US: 1-800-346-4175
TYPE YRB
HYREDUCER™
FOR ALUMINUM TO COPPER
AND ALUMINUM TO ALUMINUM
UL Listed 90° C,
600 Volts to 35 kV ♦
HYREDUCER™ type YRB reducer butt splice
is designed to splice two different conductor
sizes and is UL Listed for aluminum to copper
and aluminum to aluminum applications. The
outside diameter is held constant to minimize
installation dies and is factory prelled with
PENETROX™.
Catalog
Number
Conductor Range ●
Aluminum or Copper Size † Dimensions
Installation Tooling ▲
Hydraulic Tools, Die Sets (No. of Crimps ‡) Wire
Strip
LengthBarrel A Barrel B O.D D L
Y35 ■, Y39,
Y750, Y46* ‡
Die▲
Index
Color
Code
YRB2U4 1 str.
2 str.
4 str.
3 str. 0.65 0.88 2.00 U25ART ( 1 ) 296 Tan 15/16"
YRB25U2 1/0 str. 1 str.
2 str. 0.65 0.88 2.00 U25ART ( 1 ) 296 Tan 15/16"
YRB27U25 3/0 str. 1/0 str. 0.85 1.36 3.31 U28ART ( 2 ) 298 White 1-7/16"
YRB27U26 3/0 str. 2/0 str. 0.85 1.36 3.31 U28ART ( 2 ) 298 White 1-7/16"
YRB28U26 4/0 str. 2/0 str. 0.85 1.36 3.31 U28ART ( 2 ) 298 White 1-7/16"
YRB29U28 250 kcmil 4/0 str. 1.11 1.73 4.21 U31ART ( 2 ) 299 Brown 1-13/16"
YRB31U28 350 kcmil 4/0 str. 1.11 1.73 4.21 U31ART ( 2 ) 299 Brown 1-13/16"
YRB31U29 350 kcmil 250 kcmil 1.11 1.73 4.21 U31ART ( 2 ) 299 Brown 1-13/16"
YRB34U31 500 kcmil 350 kcmil 1.31 2.11 5.12 U34ART ( 4 ) 300 Pink 2-3/16"
YRB36U31 600 kcmil 350 kcmil 1.46 2.25 5.57 U39ART-2 ( 4 ) 936 Yellow 2-5/16"
YRB36U34 600 kcmil 500 kcmil 1.46 2.25 5.57 U39ART-2 ( 4 ) 936 Yellow 2-5/16"
YRB39U34 700/750 kcmil ●
900 Compact AL ▼ 500 kcmil 1.46 2.25 5.57 U39ART-2 ( 4 ) 936 Yellow 2-5/16"
YRB39U36 700/750 kcmil ●
900 Compact AL ▼ 600 kcmil 1.46 2.25 5.57 U39ART-2 ( 4 ) 936 Yellow 2-5/16"
Features & Benets
• Constant outside diameters. Electro
tin-plated
◊ Minimizes installation dies and
provides a smooth prole for easy
taping and provides durable long
lasting corrosion resistance
• Factory prelled with BURNDY
®
PENETROX™ oxide inhibiting compound
◊ Contains homogeneously
suspended conductive metallic
particles which penetrate oxides
between conductor strands and
forms an air tight connection
• Solid center barrier
◊ Provides center stop for correct
cable insertion and aids the
thorough penetration of
PENETROX™ oxide inhibiting
compound between conductor
strands
• Connectors are clearly marked with catalog
number, wire size, and
color-coded die index
◊ Provides clear, easy to use
information to lower installed costs
• Each barrel end has a plastic end cap
◊ Keeps the connector barrels free of
foreign materials
CRIMP
ELECTRO TIN
PLATED COLOR CODED
END CAPS
PRE-FILLED
WITH PENETROX
CRIMP
† Contact BURNDY® for conductor sizes not shown.
▲ See tooling section of this catalog for complete tool and
die listings.
‡ Number of crimps.
* Use PUADP-1 adaptor with U dies shown in Y46
HYPRESS™.
■ The maximum size for the Y35 is 400 kcmil.
♦ For applications greater than 2000 Volts consult cable
manufacturer for voltage stress relief instructions.
● Also accommodates compressed and compact
conductors (except 700 kcmil in 750 kcmil barrel).
▼ Tested with Y644HSXT and PAT644XT-18V dieless
tools only and not UL Listed with any tool on 900
Compact Al.
Note: All dimensions shown are for reference only.
Compression Connections
Aluminum Compression — Reducing Splice
C-153
BURNDY®
Blue highlighted items are industry standard and most frequently ordered.
Canada: 1-800-387-6487 www.burndy.com US: 1-800-346-4175
Underground
TYPE YRB-U
HYREDUCER™ SPLICE
(Continued)
For Aluminum to Aluminum and
Aluminum to Copper
Installation (Number of Crimps per End)
Color Code Die Index
Hydraulic Dieless (# of Crimps)
Y35, Y39, Y750,
BAT35, BAT750,
PAT750
Y46 Y45 Y48B Y60BHU
Mechanical:
MY29-3 (1),
MY29011 (1)
Hydraulic:
Y644M (1),
PAT644-18V (1)
Tan 296 U25ART (1) U25ART (1) U25ART (1) C25AR (1) — MY29-3 (1)
MY29-11 (1)
Y644M (1)
PAT644-18V (1)
White 298 U28ART (2) U28ART (2) U28ART (2) C28AR (2) —
Brown 299 U31ART
Overlap Crimp
U31ART
Overlap Crimp
U31ART
Overlap Crimp C31AR (1) L31ART (1)
Y644M (1)
PAT644-18V (1)
Pink 300 U34ART
Overlap Clamp
U34ART
Overlap Clamp
U34ART
Overlap Clamp C34AR (1) L34ART
Yellow 936 U39ART-2 (4) U39ART-2 (4) U39ART-2 (4) C39AR (2) L39ART (2) —
1 Material: Aluminum.
2 Finish: Electro-tin plated.
Barrels are partially lled with PENETROX™ and sealed.
4 Scratch brushing of all conductors before making installation is recommended.
5 Not for use with Copper-to-Copper applications.
6 Dimensions in brackets [ ] are in millimeters rounded off to the nearest millimeter,
unless otherwise noted and are for reference only.
3
Catalog number PT6515 Adaptor is required to use “U” dies in Y45 series tools.
Catalog number PUADP-1 Adaptor is required to use “U” dies in Y46 series tools.
9 On MY29-3 HYTOOL™ use alum. Index plate settings as follows,
for 1/0 conductor use 1/0 setting. For conductor smaller than 1/0 size use
2/0 setting.
7
8
K-69
BURNDY®
Blue highlighted items are industry standard and most frequently ordered.
US: 1-800-346-4175 www.burndy.com Canada: 1-800-387-6487
Underground
TYPE YRB-T
HYREDUCER™ SPLICE
For Copper to Copper
Type YRB-T splice is designed for use within
underground systems. Copper splices are tapered
and recommended for use on copper-to-copper
cables.
All splices have solid center stops for use with oil
lled and non-oillled cables.
The Outside Diameter is held constant to minimize
installation dies. Rated up to 35 kV
Catalog
Number
Figure
No.
Conductor Size Dimensions
Barrel “A” Barrel “B” B Min. BB Min. L O.D.
YRB2825T 2 4/0 (0.53) 1/0 (0.37) 1.16
[29]
1.16
[29]
2.84
[73]
0.69
[18]
YRB3428T 3 500 kcmil 4/0 (0.53) 1.73
[44]
1.73
[44]
4.50
[114]
1.06
[27]
Catalog
Number
Color
Code
Installation Tooling (Number of Crimps)
Dieless
(# of Crimps)
Wire
Strip
Length
Die Information Mechanical Hydraulic
Die
Index Type OUR840 MD7
MD7-34R MD6
Y35, Y39,
Y750,
PAT750
BCT500,
Y500CT Y46 Y45 Y48B Y60BHU
YRB2825T Purple Die 15 Purple
Die Set
X28VT
(4)
X28RT
(4)
X28VT (4) X28VT
(4) U28RT (1) — U28RT
(1) —C28R
(1)
L29ART
(1)
Hydraulic:
Y644M (1)
PAT644M (1)
1-7/32"
YRB3428T Brown
Die
20 or
299
Brown
Die Set — — —
U34ART
(2)
U31ART
(2)
W34VT
(2)
W34RT
(2)
U34RT
(2)
U31ART
(2)
U34RT
(2)
U31ART
(2)
C34R
(1)
C31AR
(1)
L34RT
(1)
Hydraulic:
Y644M (1)
PAT644M (1)
1-13/16"
1 Material: Copper.
For Tin-Plating, add sufx “TN” to the Catalog Number
(example: YRB2825TN). For Hot Tin dipped add sufx
“W” to the catalog number (example: YRB2825TW).
Catalog Number PT6515 Adaptor is required to use
“U” dies in Y45 series tools.
Catalog Number PUADP-1 is required to use “U” dies
in Y46 series tools.
5 Dimensions in brackets [ ] are in millimeters rounded
off to the nearest millimeter, unless otherwise
specied, and are for reference only.
Sufx “TN” and “W” will not be stamped on part.
2
2
2
3
3
4
4
7
7
7
Fig. 1
Fig. 3Fig. 2
K-70
BURNDY®
Canada: 1-800-387-6487 www.burndy.com US: 1-800-346-4175
Tooling
12-TON U DIES*
BURNDY® Die Sets
Fits Y35, Y39, Y750 Series, 
PAT750 Series,
PAT46 Series
(with PUADP-1 Adapter)
U die case Part# PT29291, holds up to 15 U dies
or U-Wide die sets.
Wire Size Copper Copper Wide Die** Aluminum
#8 AWG U8CRT U8CRTW U8CABT
#6 AWG U5CRT U5CRTW U6CABT
#4 AWG U4CRT U4CRTW U4CABT
#3 AWG U3CRT U3CRTW N/A
#2 AWG U2CRT U2CRTW U2CABT
#1 AWG U1CRT-1 U1CRT-1W U1CART
1/0 AWG U25RT U25RTW U25ART
2/0 AWG U26RT U26RTW U26ART
3/0 AWG U27RT U27RTW U27ART
4/0 AWG U28RT U28RTW U28ART
250 kcmil U29RT
N/A
U29ART
300 kcmil U30RT U30ART
350 kcmil U31RT U31ART
400 kcmil U32RT U32ART
500 kcmil U34RT U34ART
535 Flex kcmil U38XRT N/A
600 kcmil U36RT U36ART
750 kcmil U39RT U39ART-2
777 Flex U44XRT N/A
* Non-tension U-type 12 ton dies for YA, YS, YA-A, YS-A
style connectors.
** Wide dies are intended for use on long barrel terminals
and splices (YA / YS) only.
NOTE: N/A = not applicable.
Dies
N-5
BURNDY®
Canada: 1-800-387-6487 www.burndy.com US: 1-800-346-4175
Tooling
Dies
UDIEKITCU,
UDIEKITCUW,
UDIEKITAL,
UDIEKITHYGRD
BURNDY® U DIE KITS
The UDIEKITCU and UDIEKITAL die kit includes
15 sets of “U” dies, type U-RT and U-ART
respectively, and the PT29291 die case. These
stainless steel color coded dies are for crimping
BURNDY® YA, YS, YA-A and YS-A type HYLUGTM
color coded terminals and splices ranging from #6
AWG through 750 kcmil.
The UDIEKITCUW includes 9 sets of wide
stainless steel, color coded “U” dies are for
crimping BURNDY® long barrel YA type HYLUGTM
and YS type HYLINKTM color coded terminals and
splices ranging from #8 AWG through 4/0 AWG.
The wide “U”dies require only one crimp compared
to two crimps when using standard width dies on
long barrel YA type terminals and YS type splices
up to 4/0 AWG.
The UDIEKITHYGRD kit includes 8 die sets.
Seven dies sets are used to install the BURNDY®
HYGROUND® irreversible compression grounding
connectors, and the U2CABT die set for pre-
crimping 1/2", 5/8" and 3/4" ground rods for
increased rotational resistance.
BURNDY® “U” dies are used in the Y35, Y39, Y750
series, PAT750-18V series, Y46 and PAT46-18V
(with PUDAP-1 adapter) tools.
UDIEKITHYGRD Includes
Catalog Number
UC
UO
U997
PU998
U1011
U1104
U1105
U2CABT (Ground rod pre-crimp die)
PT29291 (Die case)
Wire Size UDIEKITCU 
Includes 
UDIEKITCUW 
Includes 
UDIEKITAL 
Includes
#8 AWG not in kit U8CRTW not in kit
#6 AWG U5CRT U5CRTW U6CABT
#4 AWG U4CRT U4CRTW U4CABT
#2 AWG U2CRT U2CRTW U2CABT
#1 AWG U1CRT-1 U1CRT-1W U1CART
1/0 AWG U25RT U25RTW U25ART
2/0 AWG U26RT U26RTW U26ART
3/0 AWG U27RT U27RTW U27ART
4/0 AWG U28RT U28RTW U28ART
250 kcmil U29RT
N/A
U29ART
300 kcmil U30RT U30ART
350 kcmil U31RT U31ART
400 kcmil U32RT U32ART
500 kcmil U34RT U34ART
600 kcmil U36RT U36ART
750 kcmil U39RT U39ART-2
Die Case PT29291 PT29291 PT29291
N-7
BURNDY®
US: 1-800-346-4175 www.burndy.com Canada: 1-800-387-6487
Reference
PRESENT INSTALLATION TOOL INDEX (continued)
DIE DIELESS TOOLS INSTALLATION TOOLING USING DIES
GROOVE MECH. HYD. DIE INFORMATION MECHANICAL HYDRAULIC
BURNDY EEI MR, MY Y644 TYPE COLOR MD6 OUR840 Y35
Y39 Y750
Y45
Y46
-Y60 Ser.
298 MY29-3 1
CRIMP
DIE SET WHITE X28ART U28ART U28ART U28ART U28ART U28ART L28ART
NEST P31D
INDENTOR Y45PR5
299 1
CRIMP
DIE SET BROWN U31ART U31ART U31ART U31ART U31ART L31ART
NEST P35D
INDENTOR P48PR1
300 1
CRIMP
DIE SET PINK U34ART U34ART U34ART U34ART U34ART L34ART
NEST P39D
INDENTOR P49PR1
301 1
CRIMP
DIE SET RED S39ART P39ART L39ART
NEST P45D
INDENTOR P48PR1
302 1
CRIMP
DIE SET BROWN S44ART P44ART L44ART
NEST No Nest
INDENTOR P48PR1
303 DIE SET GRAY U42ART U42ART U42ART U42ART U42ART
304 DIE SET U304 U304 U304 U304 U304 L304
305 341 DIE SET U305 U305 U305 U305 U305 L305
306 170 DIE SET U170 U170 U170 U170 U170 L170
308 DIE SET U308 U308 U308 U308 U308
313 DIE SET U313 U313 U313 U313 U313 L313
314 376 DIE SET L314
316 DIE SET U316 U316 U316 U316 U316 L316
317 426 DIE SET U317 U317 U317 U317 U317 L317
318 261 DIE SET U261 U261 U261 U261 U261 L261
319 DIE SET S319 P319 L319
320 DIE SET S320 P320 L320
321 DIE SET U321 U321 U321 U321 U321 L321
322 DIE SET U322 U322 U322 U322 U322
324 1
CRIMP
DIE SET RED U29ART U29ART U29ART U29ART U29ART L29ART
NEST P32D
INDENTOR P34PR5
326 538 DIE SET U33RT U33RT U33RT U33RT U33RT
327 14A DIE SET U327 U327 U327 U327 U327 L327
328 DIE SET L328
329 DIE SET U329 U329 U329 U329 U329
331 DIE SET U331 U331 U331 U331 U331
339 165
205 287 DIE SET X-339 U165/
U205
U165/
U205
U165/
U205
U165/
U205
U165/
U205
341 305 DIE SET U305 U305 U305 U305 U305 L305
342 DIE SET S342 P342 L342
344 DIE SET L344
345 DIE SET L345
Cat. No. Y35P3 Adaptor is required to use “Y34PR” type
indentors with “U” type nest dies in Y35 and Y750 series.
Cat. No. PT6515 Adaptor is required to use “U” type dies
in Y45 series.
-Cat. No. PUADP-1 Adaptor is required to use “U” type
dies in Y46 series.
The MD6-6R2 ratchet tool is required on these sizes.
The standard MD6 or MD6R ratchet tools will not work.
O-44
BURNDY®
Canada: 1-800-387-6487 www.burndy.com US: 1-800-346-4175
Reference
ALPHA-NUMERIC INDEX BY CATALOG NUMBER (Continued)
TN14-6G1
TN14-6LF
TN14-8
TN148BF
TN14-8F
TN14-8LF
TN18-10
TN1810BF
TN18-10F
TN18-10LF
TN18-14
TN18-14F
TN18-38
TN18-4
TN184F
TN18-516
TN18-6
TN186BF
TN18-6F
TN18-6G1
TN18-6LF
TN18-8
TN188BF
TN18-8F
TN18-8LF
TN20-2F
TN20-6F
TP10-10
TP1010BF
TP10-10F
TP10-10LF
TP10-10Z
TP10-12
TP10-14
TP10-38
TP10-516
TP10-6
TP106BF
TP10-6F
TP10-6LF
TP10-6Z
TP10-8
TP108BF
TP10-8F
TP10-8LF
TP10-8Z
TP14-10
TP1410BF
TP14-10F
TP14-10LF
TP14-10Z
TP14-14
TP14-2F
TP14-2Z
TP14-38
TP14-4
TP14-516
TP14-6
TP146BF
TP14-6F
TP14-6LF
TP14-6Z
TP14-8
TP148BF
TP14-8F
TP14-8LF
TP14-8Z
TP16-10
TP1610BF
TP16-10F
TP16-10LF
TP16-10Z
TP16-14
TP16-2F
TP16-2Z
TP16-38
TP16-4
TP16-516
TP16-6
TP166BF
TP16-6F
TP16-6LF
TP16-6Z
TP16-8
TP168BF
TP16-8F
TP16-8LF
TP16-8Z
TS-KD
TS-RD
TS-SQ
TTV10
TTV14
TTV18
TWT1
TWT2
U1011
U1104
U1105
U1CART
U1CRT-1
U1CRT-1W
U25ART
U25RT
U25RTW
U26ART
U26RT
U26RTW
U27ART
U27RT
U27RTW
U28ART
U28RT
U28RTW
U29ART
U29RT
U2CABT
U2CRT
U2CRTW
U30ART
U30RT
U31ART
U31RT
U32ART
U32RT
U34ART
U34RT
U36ART
U36RT
U38XRT
U39ART-2
U39RT
U3CRT
U3CRTW
U44XRT
U4CABT
U4CRT
U4CRTW
U5CRT
U5CRTW
U6CABT
U8CABT
U8CRT
U8CRTW
U997
UB101
UB1027
UB1028
UB1029
UB1030
UB1031
UB1032
UB1033
UB104
UB105
UB106
UB107
UB124
UB178
UB187
UB199
UB204
UB222
UB224
UB230
UB232
UB236
UB242
UB244
UB249
UB254
UB257
UB258
UB260
UB261
UB262
UB263
UB264
UB266
UB267
UB268
UB269
UB271
UB275
UB282
UB291
UB293
UB294
UB300
UB302
UB306
UB310
UB311
UB314
UB315
UB317
UB318
UB319
UB328
UB336
UB344
UB354
UB357
UB358
UB383
UB384
UB390
UB392
UB399
UB400
UB416
UB422
UB425
UB436
UB437
UB464
UB540
UC
UC25R2R
UC25R2RS
UC2834
UC28R
UC28RS
UC2W28-L
UC2W30
UC3040
UC32R
UC32RS
UC33R
UC3444
UC4W28
UC4W28CONKIT
UC6W25
UC6W25CONKIT
UC8W26-L
UCCOVER1BOX25
UCG25R
UCG25R2R
UCG25R2RS
UCG25RS
UCG28R
UCG28RS
UCG32R
UCG32RS
UCK-1UL
UCK-2UL
UCK-3UL
UCT26RS
UCT32RS
UCTCOVER
UCU28AC
UDIEKITAL
UDIEKITCU
UDIEKITCUW
UDIEKITHYGRD
UGS350ULDB
UGSKIT2
UGSKIT250
UGSKIT8
UH143
B-9
B-34
B-9
B-39
B-29
B-34
B-9
B-39
B-29
B-34
B-9
B-29
B-9
B-9
B-29
B-9
B-9
B-39
B-29
B-9
B-34
B-9
B-39
B-29
B-34
B-29
B-29
B-8
B-38
B-28
B-33
B-42
B-8
B-8
B-8
B-8
B-8
B-38
B-28
B-33
B-42
B-8
B-38
B-28
B-33
B-42
B-8
B-38
B-28
B-33
B-42
B-8
B-28
B-42
B-8
B-8
B-8
B-8
B-38
B-28
B-33
B-42
B-8
B-38
B-28
B-33
B-42
B-8
B-38
B-28
B-33
B-42
B-8
B-28
B-42
B-8
B-8
B-8
B-8
B-38
B-28
B-33
B-42
B-8
B-38
B-28
B-33
B-42
N-105
N-105
N-105
B-75
B-75
B-75
G-26
G-26
N-7
N-7
N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5
N-5, N-7
N-5, N-7
N-5
N-5
N-5
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5, N-7
N-5
N-5
N-5, N-7
N-7
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
D-9
N-7
H-16
H-16
H-13
H-16
H-16
H-10
H-13
H-13
H-16
H-16
H-16
H-13
H-13
H-18
H-13
H-18
H-10
H-18
H-16
H-16
H-16
H-16
H-16
H-16
H-16
H-16
H-10
H-10
H-10
H-17
H-17
H-18
A-38
N-7
N-7
N-7
N-7
A-35
A-33
A-33
A-35
L-17 O-73
Catalog Number Page # Catalog Number Page # Catalog Number Page # Catalog Number Page #

Navigation menu