GE LED Power Supply Outddoor Dimming Driver GE150/1050/MV GL — Datasheet | OLP3063

2016-08-17

: Pdf 1000459315-Attachment 1000459315-Attachment B3 unilog

Open the PDF directly: View PDF PDF.
Page Count: 5

GE
Lighting
Outdoor Dimming Driver GE150/1050/MV-GL
12161
LED Power Supply
imagination at work
Outdoor Dimming Driver
GE150/1050/MV-GL
Product Features
Physical
• Unit must be installed within an electrical enclosure.
• Enclosure wiring must be rated to 600V & 105°C or higher.
Performance
• Classified as Class 1 as per UL8750.
• Dimming circuit is classified as Class 2 as stipulated in UL1310.
• Minimum ambient operating temperature: -40°C.
• Maximum allowable case temperature: 80°C.
• For reliability and failure rate information, contact GE Technical Sales Representative.
• Output current reduces if the case temperature exceeds 85°C.
• UL listed for operation in dry/damp locations (IP66).
• Tolerates of extended open circuit and short circuit conditions.
• Compliant to FCC Title 47 Part 15 Class A
• Surge resistance per IEEE/ANSI C136.2-2015
Location C-Low (6kV/3kA)
• Ground Leakage current of <= 0.4 mA
UL Conditions of Acceptability – E340135
• The unit has been examined to comply with Class 1 Output Criteria
• The unit is only to be used in dry or damp locations
• The metal casing must be connected to EARTH.
• TVSS-GND (Yellow wire) shall be connected to fixture ground after hi-pot test
using closest tab screw. THIS IS NOT A SAFETY GROUND!
Max Efficiency @ Full Load Max Max Min Max Isolated Dimming
Output Output Output Input THD PF Inrush Weight IP
Power Current Voltage Current @75W @75W Current Protocol Current Dimming (lbs/kg) Rating
(W) (A) (V) 120V 230V 277V (A) Output Output (A/mS) Source Range Range (%)
0.525 ± 5% 140-280 >91% >92% >93% 1.60 @ 120V See 0-10V 0.5mA 100% - 10% 2.2/1 IP66
150 0.700 ± 5% 105-210 >90% >92% >92% 0.80 @ 277V 20% 0.9 Page 4 0-10V 0.5mA 100% - 10% 2.2/1 IP66
1.05 ± 5% 70-140 >89% >91% >91% 0-10V 0.5mA 100% - 10% 2.2/1 IP66
Line (Black)
TVSS Ground (Yellow)
Neutral (White)
GE-XXXXX
LED Driver
Output + (Red)
Output -1A (Blue)
Output -0.7A (Yellow)
Output -0.53A (Orange)
Dim + (Violet)
Dim - (Grey)
Color
Black (L)
Yellow (TVSS-GND)
White (N)
Violet (+Dim)
Grey (-Dim)
Red (+ Output)
Blue (-1A Output)
Yellow (-700mA Output)
Orange (-530mA Output)
Length in. (cm)
12 (30.5)
12 (30.5)
12 (30.5)
12 (30.5)
12 (30.5)
12 (30.5)
12 (30.5)
12 (30.5)
12 (30.5)
Description: 150W 0.53/0.7/1.05A Dimmable Class 1 PSU
Input Voltage: 120-277V
Input Frequency: 50-60Hz
ROHS Compliant: Yes
80
82
84
86
88
90
92
94
0 25 50 75 100 125 150 175 200 225 250 275 300
Efficiency [%]
Output Voltage (V)
Efficiency vs Output Voltage @ 120V 60Hz
1050mA
700mA
525mA
80
82
84
86
88
90
92
94
0 25 50 75 100 125 150 175 200 225 250 275 300
Efficiency [%]
Output Voltage (V)
Efficiency vs Output Voltage @ 277V 60Hz
1050mA
700mA
525mA
Technical Information
GE150/1050/MV-GL
25
0
20
40
60
80
100
120
35 45 55 65 75 85
Lifetime (KHrs)
Dr
i
ver Case Temperature
(
°C
)
Lifetime (kHrs) vs Case Temperature (°
C
0
10
20
30
40
50
60
70
80
90
100
110
012345678 91 01 11 2
Iout / Iout N (%)
Vdim (V)
Output current vs Dim Voltage
0.530 A
0.700 A
1.05 A
0.980
0.985
0.990
0.995
1.000
0 25 50 75 100 125 150 175 200 225 250 275 300
Power Factor
Output Voltage
PF vs Output Voltage @ 120V 60Hz
1050mA
700mA
525mA
0.90
0.91
0.92
0.93
0.94
0.95
0.96
0.97
0.98
0.99
1.00
0 25 50 75 100 125 150 175 200 225 250 275 300
Power Factor
Output Voltage
PF vs Output Voltage @ 277V 60Hz
1050mA
700mA
525mA
0
1
2
3
4
5
6
0 25 50 75 100 125 150 175 200 225 250 275 300
THD %
Output Voltage
THD vs Output Voltage @ 120V 60Hz
1050mA
700mA
525mA
0
2
4
6
8
10
12
14
16
18
20
0 25 50 75 100 125 150 175 200 225 250 275 300
THD %
Output Voltage
THD vs Output Voltage @ 277V 60Hz
1050mA
700mA
525mA
Technical Information
GE150/1050/MV-GL
Input Voltage
[Vrms]
120 31 0.1
277 60 0.1
Peak Current Pulse
[Apk]
Input Inrush Current
Pulse Duration (50% of Peak)
[ms]
Input Voltage
[Vrms]
S1 ON S1 Off
120 0.18
208 0.18
Leakage Current
[mA]
Input Ground Leakage Current
DIMMING
VIOLET, GREY LEADS
MULTIPLE OUTPUT
-RED, BLUE, ORANGE,
YELLOW LEADS
0.9
[.0]
Product Dimensions
GE150/1050/MV-GL
Product Label
38.20
[1.5]
10.2
[.4]
295.5
[11.6]
8.4
[.3]
7.2
[.3]
8.1
[.3]
4 X R3
[.1]
DETAIL A
SCALE 4:1
2
[.1]
6
[.2]
1
[.0]
3
[.1]
PUNCH HOLE
207.6 MAX PCB LENGTH
[8.2]
240.5
[9.5]
211.1
[8.3]
226.2
[8.9]
42.9
[1.7]
59.1
[2.3]
60.7
[2.4]
55.5 MAX PCB WIDTH
[2.2]
INPUT BLACK,
WHITE LEADS
YELLOW TVSS-GND
1. PUNCH HOLE MIN BEND RADIUS 0.8 MM
2. PART NOMINAL PER 3D DATABASE SUPPLIED AT SAME REVISION
AS THIS DRAWING, ONLY CRITICAL DIMENSIONS ARE SHOWN.
3. PART MUST BE FREE OF SHARP EDGES OR BURRS.
www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property
of their respective owners. Information provided is subject to change without notice. All values are design or typical
values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of
the General Electric Company. © 2015 GE.
OLP3063 (Rev 09/30/15)
VIN nom: 120-230-277V~
Freq: 50/60Hz
Iin max: 1.6A~
PF min: 0.9
INPUT
(L) BLACK
(TVSS-FGND) YELLOW
(N) WHITE
(+OUT) RED
(-OUT_0.53A) ORANGE
(-OUT_0.7A) YELLOW
(-OUT_1.05A) BLUE
(+DIM) VIOLET
(-DIM) GRAY
VOUT: 70-280V
IOUT: 0.53A RED/ORG
IOUT: 0.7A RED/YEL
IOUT: 1.05A RED/BLU
POUT: 150W
OUTPUT
Suitable for dry and damp locations
tc = 80°C max
S/N: sssss yy ddd
Made in China
PWS009 0
DIMMING
Measure 20mm
down side
Tc
LED POWER SUPPLY
G E150/1050/MV-GL
VDIM: 0-10V
IMPORTANT: After HiPot test connect TVSS-
FGND to fixture using the closest tab screw.
WARNING /
RISK OF ELECTRIC SHOCK
Turn power off before servicing.
Properly ground power supply and fixture
Déconnectez l’alimentation électeique
avant d’installer ce produit.
RISQUE DE CHOC ÉLECTRIQUE
AVERTISSEMENT !
CASE
MUST BE
GROUNDED
E340135

Navigation menu