1000464621 Catalog

1000446606-Catalog 1000446606-Catalog 1000446606-Catalog B5 unilog cesco-content

34666-Catalog 34666-Catalog 34666-Catalog 783936 Batch2_1 unilog cesco-content

526762-Catalog 526762-Catalog 526762-Catalog 783936 Batch5 unilog cesco-content

66460-Brochure 66460-Brochure 66460-Brochure 783936 Batch2 unilog cesco-content

112569-Catalog 112569-Catalog 112569-Catalog 783936 Batch7 unilog cesco-content

2016-09-04

: Pdf 1000464621-Catalog 1000464621-Catalog B4 unilog

Open the PDF directly: View PDF .
Page Count: 27

PRi

PLUGS AND RECEPTACLES INDEX

Section PR

Introduction/Features

Applications.........................................2 - 5

VP/VR/VPR Series

30 amp including new “AT” models .............6

VP/VR/VPR Series

60 amp including new “AT” models .............7

VP/VR/VPR Series

100 amp including new “AT” models ...........8

VP/VR/VPR Series

200 amp ...................................................9

VSQ (VWSQ Series NEMA 4)

Interlocked Switched Receptacles ..........10

VSQ-FS Series

Factory Sealed Receptacles ...................11

VBQ Series

Interlocked Breaker Protected

Receptacles.....................................12 - 13

VSI Series

Plugs and Switched Receptacles.....14 - 16

VCR Series

Clean Room Receptacles........................17

KR Series

Introduction.............................................18

KR Series

20, 30 and 60 amp ..........................19 - 21

UGP/UGR Series

Plugs and Receptacles ....................22 - 23

Adapter, Grips and Handlamps...............26

UGRC Series

Connector ...............................................24

UGRP Series

Panel Mount Receptacle .........................25

UGRGF Series

GFI Protector Receptacle........................26

UGFI Series

Ground Fault Protector............................27

HAZARDOUS LOCATIONS –

BLADE STYLE

NEMA 4X

HAZARDOUS LOCATIONS –

INTERLOCKED

HAZARDOUS LOCATIONS –

DELAYED ACTION

HAZARDOUS LOCATIONS –

INTERLOCKED

I.E.C. CONFIGURED

PRi

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

NEMA 4X METALLIC

PR2

FEATURES-SPECIFICATIONS

THE FIRST NEMA 4X RATED LINE OF

METALLIC PLUGS & RECEPTACLES.

VersaMate®metallic pin & sleeve plugs & receptacles are

designed for heavy duty industrial use. These devices sup-

ply power to both fixed and portable electrical equipment

including pumps, generators, welders, vacuums, blowers

and similar apparatus.

Suitable for indoor or outdoor use. Applications include the

wet, cold, hosedown, hazardous or corrosive areas in such

industrial applications as:

•Pulp & Paper Mills •Breweries

•Electrical Power Plants •Refineries

•Petrochemical Plants •Chemical Plants

•Wastewater Treatment •Grain Facilities

•Marine, Docks, Ports •Textile Manufacturing

•Construction Sites •Food Processing Facilities

Standard Materials:

Copper-free aluminum construction with electrostatically

applied epoxy/polyester finish. Contacts are brass with a

patented beryllium copper spring tensioner. External screws

are 316 stainless steel.

Features:

The VersaMate product line includes 30, 60, 100 and 200

Amp plugs, receptacles and connectors with a full range of

back boxes. Popular options include reverse service and

polarization. The VersaMate line is FULLY

INTERCHANGEABLE1with UL1686 configured and listed

devices such as Crouse-Hinds®Arktite®or Appleton®

Powertite®. Standard location receptacle bolt hole patterns

match competitive back boxes so users can upgrade to

VersaMate without changing back boxes in instances where

changing the conduit system is difficult.

600 VAC/250VDC; 50-400 Hertz

NEMA 3, 4, 4X

Class I, Div. 1 & 2, Groups B,C,D;

NEMA 7 B,C,D2

Class l, Zones 1 & 2, llB+H2, llA2

Class ll, Div. 1 & 2, Groups F & G;

NEMA 9 F,G2

Class lll2

1VersaMate®components are UL classified and intermateable with other UL

1686-C1 configured devices (when installed in accordance with instructions

furnished with device). Assemblies containing components from other manu-

facturers would have the NEMA type rating of the lowest rated device.

2See product pages for specific ratings.

Arktite®is a registered trademark of Crouse-Hinds®.

Powertite®is a registered trademark of Appleton®.

Plugs:

Octagonal style (Patented) for a firm and sure

grip when connecting or disconnecting is fea-

tured on both plug and cable connector

bodies. Insulators have high mechanical and

dielectric strength and “Low Arc Tracking.”

“Increased Safety” type box terminals with

gripper ribs securely clamp around conductors.

Funneled conductor entry chambers lead all properly stripped

conductors into terminals simultaneously. NEMA 4X rating

when inserted into VersaMate receptacle and locking ring is

tightened.

Receptacles:

Exclusive Patented “Breech-Lock” cap

serves as either flip lid or screw cover.

Receptacle is NEMA 3R with lid snapped

shut or NEMA 4X with lid turned shut or

when VersaMate plug is inserted and locking

ring tightened. Patented notch in cap arm

holds cap open for easy plug insertion or

maintenance. Patented pin design uses slotted spring clip which

avoids excessive wear while providing continuous electrical pin

to sleeve contact. VersaMate®receptacles use the same

“Increased Safety” terminals and funnel design as

VersaMate®plugs.

Cable Clamping Assembly:

Plugs and cable connectors are

supplied with an exclusive neoprene

“Onion Skin” peel-away type grom-

met. The VersaRange®cable clamp

system captures cable with four

grip points using only two tighten-

ing screws. Clamp guide assembly provides a firm fit over a

wide range of cable diameters. Non-removable set screws pre-

vent clamp guide assembly from backing out. Clamps have

smooth contoured shoulder design to prevent snags or damage

when moving equipment.

Back Boxes:

VersaMate back boxes come in a variety of

mounting styles. Exclusive “blind” recepta-

cle mounting holes prevent moisture from

entering box via thread cavities. Boxes

come with a green grounding screw.

VSQ VBQ

VR/VP

NEW

ALLEN/SLOT

TERMINALS

PR2

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

FEATURES AND COMPARISONS PR3

KILLARK BRAND

New Allen/slot terminal screws do

not contact or machine conductor.

Allows higher torque values typical

in the oil industry.

VersaMate original Phillips/slot

“Increased Safety” type terminals

reduce connection fatigue.

Screws do not contact or machine

conductor and are under spring

tension to reduce loosening and

pullout due to vibration.

Conventional screw type

terminals. Screws “machine”

(grind or fray) conductor.

Screws are not under tension

and more easily loosen from

heating and cooling cycles

or from vibration. Screws can

fall out (and be lost) during

initial shipment-requires

reassembly.

“Breech-Lock” design serves

as both flip lid or screw cover

style. Special notch in lid arm

holds cover open to ease plug

insertion or maintenance.

Conventional caps: user

must choose between flip

lid's convenience or screw

cover's better sealing capa-

bilities. Broken chains can

mean lost covers.

Exclusive "Onion Skin" style gas-

ket assures a tight seal around

cable. Skin layers are removed

from a single gasket to adjust for

various cable diameters.

Multiple gaskets require

trial & error sizing to

be sure of best fit and

seal.

Versatile range Cable Clamp

system captures cable at four

grip points using only two

screws. Smooth contoured

design avoids snags when

moving equipment.

Standard clamps squeeze

and pinch cable. Protruding

screws snag or scratch

when moving equipment.

Other clamp systems with

multiple screws are difficult

to tighten evenly.

*Slip pencil or screwdriver into notch.

TERMINALS

CAP

GASKET

CABLE CLAMP

OTHER BRANDS

ALLEN/SLOT

TERMINALS

• First NEMA 4X - Still the BEST!

• Exclusive interior gasketing

• Exclusive Terminal Designs

• No conductor machining

• Allen or Phillips types

• Exclusive Onion-Skin Gasket

• Perfect Cable Fit

• Exclusive 4-Point Cable Grip

• Uses only 2 Recessed Screws

• Exclusive Breech-Lock Cap

• Flip or Screw-On

• Notch to hold open

NEW!

PR3

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

FEATURES

PR4

EXCLUSIVE FEATURES:

Patented Exclusive “Breech-Lock” cap

serves as either flip lid or screw cover

•NEMA 3R Rating:

When receptacle cap

is snapped shut

•NEMA 4X Rating:

When receptacle cap is

turned shut or with

VersaMate®plug inserted

and ring tightened

Patented

Special notch is designed to

hold cap open for easy field

service or plug insertion with

two free hands

Key user needs were identified from “Focus Groups” comprised of Design Engineers, Contractors,

and Maintenance Personnel. Input from these forums resulted in VersaMate’s unique features.

Keyway prevents

incorrect plug

insertion

O-ring seals

Custom pin design

using slotted spring

clip to provide superior

contact and reliability Sleeve

incorporates

contaminate

relief port

Exclusive neoprene “Onion Skin”

peel-away type gasket for the

ultimate in sealing a variety

of cable sizes

VersaRange®Cable clamp system

captures cable with four grip points

using only two tightening screws.

Provides secure grip without

damaging the cable insulation

•

•Smooth shoulder

contour prevents

snags & hang ups

NEW 30,60,100A “AT” Allen/Slot

or “Increased safety” Phillips/Slot

terminals provide secure clamp-

ing of conductors

Funneled wiring

chamber design for

fast and accurate

conductor insertion

to speed assembly.

All wires can be

inserted at one time

Patented

Body style with octagonal

shape for easy grip

•

Unique VersaMate®Feature

The VersaMate®Line is designed

for the industrial customer based

on engineering and user surveys

O-ring seals

•Funneled wiring chamber

design for fast and

accurate conductor

insertion to speed

assembly. All wires can

be inserted simultaneously

Denotes Patented Feature

•

PR4

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

NEMA 4X METALLIC PR5

REVERSE SERVICE: S39

Add suffix S39 for

factory Reverse Service

of receptacles, plugs

or connectors.

Receptacles or connec-

tors are assembled with

plug interiors while

plugs are assembled

with receptacle interiors.

For applications where

the plug is energized

(i.e. from a generator) to

feed a non-energized

receptacle. Prevents

easy contact with energized exposed pins. This conversion

can be performed in the field with a complementary plug &

receptacle (30A to 100A devices shown on pages PR6-8).

200A Amp devices shown on page PR9 are a factory-only

option. Reverse Service is not for hazardous locations.

Style I

In a Style I plug, the cable’s ground conductor is bonded

to the plug housing by means of solderless connector. The

receptacle is grounded by being part of a grounded conduit

system. Upon insertion, detent springs in the receptacle

housing contact and ground the plug housing before current

carrying poles. All poles are current carrying.

GROUNDING:

To minimize the danger of electrical shock when utilizing

portable equipment, the National Electrical Code requires

exposed metal parts be grounded if operated at more than

150 volts to ground. The VersaMate®plug & receptacle sys-

tem is available in two grounding styles. Please note Style I

and II devices cannot be intermated.

POLARIZED OPTION: S37

Add suffix S37 for special polarity.

Can prevent connection between mismatched voltages or

frequencies in areas where devices of the same amperage,

poles and grounding style are used. Receptacle or connector

interiors are rotated 22-1/2° to the right; plug is rotated oppo-

site to match. This is a factory only option.

Style II

In a Style II plug, the cable’s ground conductor is bonded

to the extra grounding pole and to the plug housing via a

bonding jumper. The receptacle has a matching grounding

pole connected to the system ground conductor which is

further tied to the grounded conduit system via a bonding

jumper. Upon insertion, detent springs in the receptacle

housing contact and ground the plug housing; then the

extra long ground pole connects before the current

carrying poles engage. The Style II ground pole makes first

and breaks last.

Standard S37 Option

Typical Application

3W4P Illustrated3W3P Illustrated

PR5

30 AMP RECEPTACLES & BACK BOXES

CATALOG NUMBER

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

30 AMP NEMA 4X METALLIC

PR6

FEATURES-SPECIFICATIONS

*See page PR5 for more information on these options.

Plug

Connector

Receptacle Back Box Dimensions

• 30 Amp 600VAC/250VDC; 50-400 Hertz

NEMA 3, 4, 4X1

• PLUGS ONLY2:

Class I, Div. 1 & 2, Groups B,C,D; NEMA 7 B,C,D

Class l, Zones 1 & 2, llB+H2, llA

Class ll, Div. 1 & 2, Groups F & G; NEMA 9 F,G; Class lll

GROUND

STYLE

Style I

Style II

2W2P

3W3P

4W4P

2W3P

3W4P

VR321E2

VR331E2

VR341E2

VR332E2

VR342E2

VRE23

VR321C2

VR331C2

VR341C2

VR332C2

VR342C2

VRC23

VR321D2

VR331D2

VR341D2

VR332D2

VR342D2

VRD23

VR321

VR331

VR341

VR332

VR342

–

CIRCUIT E3TYPE

ORIG. AT

C3TYPE

ORIG. AT

D3TYPE

ORIG. AT

RECEPTACLE ONLY

ORIG. AT

Splice box only3

330 Amp Back Boxes are available in 1/2", 3/4" and 1" conduit sizes.

Size listed for 3/4". For other available sizes, change the BOLD “2” in either the

assembly or box only number to: 1=1/2", 2=3/4", 3=1". Assembly catalog numbers

are listed for ease of ordering or specification and devices are shipped as compo-

nents.

30 AMP PLUGS & CONNECTORS

Style I

Style II

2W2P

3W3P

4W4P

2W3P

3W4P

.55 - 1.20 IN

VP3275

VP3375

VP3475

VP3385

VP3485

GROUND

STYLE CIRCUIT GROMMET

RANGE PLUG

ORIG. AT

VPR3255

VPR3355

VPR3455

VPR3365

VPR3465

CONNECTOR

ORIG. AT

VRD

VRC

VRE

1Components are intermateable & UL classified with other UL1686 config

ured devices (when installed in accordance with instructions furnished

with device). Assemblies containing components from other manufactur

ers would have the NEMA type rating of the lowest rated device.

2Plugs are hazardous suitable when mated with properly rated receptacles

configured to use UL1686 type plugs, such as VersaMate VSQ/VBQ.

– Note, 2, 3 & 4 pole device dimensions are the same.

MODIFICATIONS*

Reverse service for receptacles, plugs & connectors

Polarization for receptacles, plugs & connectors

S39

S37

CATALOG NUMBER DESCRIPTION

CATALOG NUMBER

CDReceptacle

Connector

Wire Range

File No. E10757 Certified File No. LR111846

Regular Stranding: #10 - #6 original style or “AT” type

Extra flex: #10 - #8 original style or “AT” type

Plug

VersaRange®clamps provide

a firm fit for one plug (or con-

nector) over a wide range of

cable diameters (competitors

often need two – requiring

additional sizing decisions).

VP3022

VP3033

VP3044

VP3023

VP3034

VPR3022

VPR3033

VPR3044

VPR3023

VPR3034

VR3022E2

VR3033E2

VR3044E2

VR3023E2

VR3034E2

VRE23

VR3022C2

VR3033C2

VR3044C2

VR3023C2

VR3034C2

VRC23

VR3022

VR3033

VR3044

VR3023

VR3034

–

VR3022D2

VR3033D2

VR3044D2

VR3023D2

VR3034D2

VRD23

Origional or AT

Terminals. See PR3 for

more information

PR6

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

60 AMP NEMA 4X METALLIC PR7

FEATURES-SPECIFICATIONS

Receptacle

Plug

Connector

Back Box Dimensions

• 60 Amp 600VAC/250VDC; 50-400 Hertz

NEMA 3, 4, 4X1

• PLUGS ONLY2:

Class I, Div. 1 & 2, Groups B,C,D; NEMA 7 B,C,D

Class l, Zones 1 & 2, llB+H2, llA

Class ll, Div. 1 & 2, Groups F & G; NEMA 9 F,G; Class lll

1Components are intermateable & UL classified with other UL1686 config-

ured devices (when installed in accordance with instructions furnished

with device). Assemblies containing components from other manufacturers

would have the NEMA type rating of the lowest rated device.

2Plugs are hazardous suitable when mated with properly rated receptacles

configured to use UL1686 type plugs, such as VersaMate VSQ/VBQ.

4Dimensions in ( ) are 3 pole devices; balance are 4 pole.

360 Amp Back Boxes are available in 1", 1-1/4" and 1-1/2" conduit sizes. Size listed

above is 1-1/4". For other available sizes, change the BOLD “4” in either the assembly

or box only number as follows: 3=1", 4=1-1/4", 5=1-1/2". Assembly catalog numbers

are listed for ease of ordering or specification and devices are shipped as components.

Note: 60 Amp receptacles also fit 100 Amp mounting boxes –

see Note4on 100 Amp page PR8.

VRC

VRE

VRD

*See page PR5 for more information on these options.

MODIFICATIONS*

Reverse service for receptacles, plugs & connectors

Polarization for receptacles, plugs & connectors

S39

S37

CATALOG NUMBER DESCRIPTION

Connector

VersaRange®clamps provide

a firm fit for one plug (or con-

nector) over a wide range of

cable diameters (competitors

often need two – requiring

additional sizing decisions).

Plug

CDReceptacle

Wire Range

File No. E10757 Certified File No. LR111846

Regular Stranding: #6 - #2 original style or “AT” type

Extra flex: #6 - #4 original style or “AT” type

60 AMP RECEPTACLES & BACK BOXES

GROUND

STYLE

Style I

Style II

2W2P

3W3P

4W4P

2W3P

3W4P

VR621E4

VR631E4

VR641E4

VR632E4

VR642E4

VRE46

VR621C4

VR631C4

VR641C4

VR632C4

VR642C4

VRC46

VR621D4

VR631D4

VR641D4

VR632D4

VR642D4

VRD46

VR621

VR631

VR641

VR632

VR642

–

CIRCUIT E3TYPE

ORIG. AT

C3TYPE

ORIG. AT

D3TYPE

ORIG. AT

RECEPTACLE ONLY

ORIG. AT

Splice box only3

CATALOG NUMBER

VR6022E4

VR6033E4

VR6044E4

VR6023E4

VR6034E4

VRE46

VR6022C4

VR6033C4

VR6044C4

VR6023C4

VR6034C4

VRC46

VR6022

VR6033

VR6044

VR6023

VR6034

–

VR6022D4

VR6033D4

VR6044D4

VR6023D4

VR6034D4

VRD46

CATALOG NUMBER

60 AMP PLUGS & CONNECTORS

Style I

Style II

2W2P

3W3P

4W4P

2W3P

3W4P

.65 - 1.50 IN

VP6275

VP6375

VP6475

VP6385

VP6485

GROUND

STYLE CIRCUIT GROMMET

RANGE PLUG

ORIG. AT

VPR6255

VPR6355

VPR6455

VPR6365

VPR6465

CONNECTOR

ORIG. AT

VP6022

VP6033

VP6044

VP6023

VP6034

VPR6022

VPR6033

VPR6044

VPR6023

VPR6034

6 1/2

8 13/16

Origional or AT

Terminals. See PR3 for

more information

PR7

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

100 AMP NEMA 4X METALLIC

PR8

FEATURES-SPECIFICATIONS

Back Box Dimensions

1Components are intermateable & UL classified with other UL1686 config-

ured devices (when installed in accordance with instructions furnished with

device). Assemblies containing components from other manufacturers would

have the NEMA type rating of the lowest rated device.

2Plugs hazardous suitable when mated with properly rated receptacles

configured to use UL1686 type plugs, such as VersaMate VBQ.

5Dimensions in ( ) are 3 pole devices; balance are 4 pole.

* Angle adapter only

3100 Amp Back Boxes are available in 1", 1-1/4", 1-1/2" & 2" conduit sizes.

Size listed above is 1-1/2". For other available sizes, change

the BOLD “5” in either the assembly or box only number as follows:

3=1", 4=1-1/4", 5=1-1/2", 6=2". Assembly catalog numbers are listed for ease of

ordering or specification and devices are shipped as components.

4100 Amp Boxes & Adapters also fit 60 Amp receptacles. Adapter only can

be used to attach receptacle at an angle to a standard sheet metal box.

VJC

*See page PR5 for more information on these options.

MODIFICATIONS*

Reverse service for receptacles, plugs & connectors

Polarization for receptacles, plugs & connectors

S39

S37

CATALOG NUMBER DESCRIPTION

Connector

Receptacle

Plug

Connector

Feed through style shown

Plug

VersaRange®clamps

provide a firm fit for one

plug (or connector)

over a wide range of

cable diameters (com-

petitors often need two

– requiring additional

sizing decisions).

Receptacle

Wire Range

File No. E10757 Certified File No. LR111846

Regular Stranding: #4 - #2 original style or “AT” type

Extra flex: #4 - #2 original style or “AT” type

• 100 Amp 600VAC/250VDC; 50-400 Hertz

NEMA 3, 4, 4X1

• PLUGS ONLY2:

Class I, Div. 1 & 2, Groups B,C,D; NEMA 7 B,C,D

Class l, Zones 1 & 2, llB+H2, llA

Class ll, Div. 1 & 2, Groups F & G; NEMA 9 F,G; Class lll

CATALOG NUMBER

100 AMP PLUGS & CONNECTORS

Style I

Style II

2W2P

3W3P

4W4P

2W3P

3W4P

.88 - 1.68 IN

VP10277

VP10377

VP10477

VP10387

VP10487

GROUND

STYLE CIRCUIT GROMMET

RANGE PLUG

ORIG. AT

VPR10257

VPR10357

VPR10457

VPR10367

VPR10467

CONNECTOR

ORIG. AT

VP1022

VP1033

VP1044

VP1023

VP1034

VPR1022

VPR1033

VPR1044

VPR1023

VPR1034

100 AMP RECEPTACLES & BACK BOXES

GROUND

STYLE

Style I

Style II

2W2P

3W3P

4W4P

2W3P

3W4P

VR1021E5

VR1031E5

VR1041E5

VR1032E5

VR1042E5

VJ57

VR1021C5

VR1031C5

VR1041C5

VR1032C5

VR1042C5

VJC57

VR1021

VR1031

VR1041

VR1032

VR1042

VJA100*

CIRCUIT E3TYPE

ORIG. AT

C3TYPE

ORIG. AT

RECEPTACLE ONLY

ORIG. AT

Splice box only3

CATALOG NUMBER

VR1022E5

VR1033E5

VR1044E5

VR1023E5

VR1034E5

VJ57

VR1022

VR1033

VR1044

VR1023

VR1034

VJA100*

VR1022C5

VR1033C5

VR1044C5

VR1023C5

VR1034C5

VJC57

Origional or AT

Terminals. See PR3 for

more information

PR8

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

200 AMP NEMA 4X METALLIC PR9

FEATURES-SPECIFICATIONS

Receptacle

Connector

Back Box Dimensions

200 AMP PLUGS & CONNECTORS

Style I

Style II

3W3P

4W4P

2W3P

3W4P

1.0 - 2.5 IN

VP203512

VP204513

VP203612

VP204612

GROUND

STYLE CIRCUIT GROMMET

RANGE PLUG

CATALOG NUMBER

VPR203112

VPR204113

VPR203212

VPR204212

CONNECTOR

1Components are intermateable & UL classified with Appleton®

Powertite®or Crouse-Hinds®Arktite®devices (when installed in

accordance with instructions furnished with device. Assemblies con

taining components from other manufacturers would have the NEMA

type rating of the lowest rated device.

4Dimensions in ( ) are 3 pole devices; balance are 4 pole.

5200A 3W4P Reverse Service configured “W” Series and VersaMate®

are not intermateable. However, the VersaMate VR20422-S39 recepta-

cle ships with instructions to permanently convert for use with existing

PW-6402X SU39 plugs. Factory only configured plugs to fit old RW64C-

SU39 receptacles may be ordered as VP-PW64026 SU39.

200 Amp Back Boxes are available in dead-end sizes 1-1/2",

2" & 2-1/2" conduit sizes. Dead-end box shown is 2". For other available

dead-end box sizes, change the BOLD “6” in either the dead-end assembly

or box only number as follows: 5=1-1/2", 6=2", 7=2-1/2". Feed through boxes

are available in 2-1/2"; use “R” series adapters as required for smaller sizes

(sold separately). Assembly catalog numbers are listed for ease of ordering

or specification and devices are shipped as components.

Adapter only can be used to attach receptacle at an angle to a standard

sheet metal box.

NOTE: 200A VersaMate receptacle lids secure with wingnuts for N4X environ-

ments when not in use. VersaMate plugs secure with wingnuts and/or

lock-ring collar. This exclusive dual method allows retention of competi-

tive plugs that use either wingnuts or a lock-ring collar.

Receptacle

VJC

*See page PR5 for more information on these options.

MODIFICATIONS*

Reverse service for receptacles, plugs & connectors

Polarization for receptacles, plugs & connectors

S395

S37

CATALOG NUMBER DESCRIPTION

200 AMP RECEPTACLES & BACK BOXES

GROUND

STYLE

Style I

Style II

3W3P

4W4P

2W3P

3W4P

VR20312E6

VR20412E6

VR20322E6

VR20422E6

VJ68

VR20312C7

VR20412C7

VR20322C7

VR20422C7

VJC78

VR20312

VR20412

VR20322

VR20422

Angle adapter

only VJA200

CIRCUIT E2

TYPE

RECEPTACLE

ONLY

Splice box only

w/adapter23

CATALOG NUMBER

200 Amp 600VAC/250VDC; 50-400hertz

NEMA 3 4, 4X1

VersaRange®

clamps provide a

firm fit for one plug

(or connector) over

a wide range of

cable diameters

(competitors often

need two – requir-

ing additional sizing

decisions).

Plug

Wire Range

File No. E10757 Certified File No. LR111846

E213215

Regular Stranding: #1 - 250

Extra flex: #1 - 250

(.653 max conductor diameter)

Plug Connector

ALLEN

TERMINALS

PR9

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

VSQ & VWSQ INTERLOCKED SWITCHED RECEPTACLES

PR10

FEATURES-SPECIFICATIONS

VSQ & VWSQ RECEPTACLES

• VSQ Hazardous Location Ratings

Class I, Div. 1 & 2, Groups B,C,D

Class I, Zones I & 2, Groups IIB+H2, IIA

Class II, Div. 1 & 2, Groups F & G

Class lll

NEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)

VersaMate VSQ & VWSQ Receptacles use

VersaMate Style II plugs found on pages PR6 & PR7

and are compatible with appropriately configured

Crouse-Hinds®Arktite®or Appleton®Powertite®

plugs (when installed in accordance with instruc-

tions furnished with device)

Arktite®is a registered trademark of Crouse-Hinds®.

Powertite®is a registered trademark of Appleton®.

Features

•N4X with receptacle lid turned shut

or with plug locking ring tightened

•Copper-free aluminum construction

with electrostatically applied poly-

ester/epoxy finish. Handle mecha-

nism is chemical resistant Valox®

(TM General Electric).

•Compact size and footprint

•Plug Interlock Mechanism for Dead-

front construction. Switch cannot be

turned “ON” without fully inserted

plug. Plug cannot be removed with

switch in “ON” position

•Plug held in place when switch is

“Off” for convenience. Pull operated

release mechanism. Plug and wiring

do not have to be twisted or held to

operate switch

•Factory Wired Receptacle; easy to

wire line side of switch

•Easily visible “On-Off” indicator

handle

•“Off” position is padlockable for

maintenance safety

•Auxiliary Contact (late-make early-break)

contact rated 10 Amp, 1/3 HP at 125/250

VAC. Can be used for operating pilot

lights or starter coils (standard model only)

•Feed-through construction

•Horsepower Rated

•Internal switch horsepower rated as “motor disconnect”

HORSEPOWER 120 240 480 600

RATINGS (VAC)1

1Ø 2 5 10 15

3Ø 3 7.5 15 20

1Ø – 10 15 20

3Ø – 10 25 30

30A

60A

NOTES: VSQ/VWSQ 30 Amp models come standard with 1" drilled and tapped conduit openings

top and bottom plus two 1" x 3/4" reducers and one 3/4" close-up plug for maximum flexibility.

60 amp models come with 1-1/2" openings top and bottom and one 1-1/2" close-up plug.

VSQ & VWSQ Receptacle covers are NOT interchangeable.

1Refers to internal switch only.

VSQ HAZARDOUS VWSQ N4X ONLY VERSAMATE PLUG

30 2W3P VSQ3023 VWSQ3023 VP3385

3W4P VSQ3034 VWSQ3034 VP3485

60 2W3P VSQ6023 VWSQ6023 VP6385

3W4P VSQ6034 VWSQ6034 VP6485

CATALOG NUMBER

AMPS CIRCUIT

*See page PR5 for more information on this option

MODIFICATIONS*

Polarization for

receptacles, plugs

S37

CATALOG NUMBER DESCRIPTION

VSQ & VWSQ RECEPTACLES

File No. LR14667

File No. E91049

• VWSQ for Wet & Corrosive Locations

NEMA 3, 4, 4X

Wire Range

30 Amp Regular Stranding Max #10

60 Amp Regular Stranding Max #4

Dimensions shown are in inches for 30 AMP: 60 Amp dimensions in ( ).

NOTES: Devices have adjustable ductile lugs (vertical or side) for attachment to uneven surfaces.

Ordinary twist type wire connectors are used for final connections on 30A,

60A devices have terminal blocks.

Dimensions

VSQ

VWSQ

PR10

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

VSQ-FS FACTORY SEALED INTERLOCKED

SWITCHED RECEPTACLE

PR11

FEATURES-SPECIFICATIONS

Class I, Div. 1 & 2, Groups B,C,D

Class I, Zones I & 2, Groups IIB+H2, IIA

Class II, Div. 1 & 2, Groups F & G

Class lll

NEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)

Dimensions shown are in inches for 30 AMP. 60 AMP Dimensions in ( ).

Features – same as VSQ1plus:

•Factory Sealed Construction elimi-

nates need for conduit sealing at

the device

•Saves Installation Time & Labor –

facilitates rework

•Switch has factory wired line and

load terminals. Load terminals feed

sealed receptacle as in a standard

VSQ. Line wiring is passed from the

sealed compartment into the wiring

chamber

•Receptacles may be loosened from

black box and turned 180 degrees to

adjust for top or bottom feed.

•Ordinary twist type wire connectors

are used for final connections on

30A. 60A devices have terminal

blocks

NOTES: VSQ-FS 30 Amp models come standard

with one 1" drilled and tapped conduit openings

into the wiring chamber plus one 1" x 3/4"

reducer.

60 amp models come with one 1" opening.

1VSQ-FS models do not have auxiliary contacts.

VSQ-FS VERSAMATE

HAZARDOUS PLUG

30 2W3P VSQ3023FS VP3385

30 3W4P VSQ3034FS VP3485

60 2W3P VSQ6023FS VP6385

60 3W4P VSQ6034FS VP6485

VSQ - FS RECEPTACLES

Dimensions

*See page PR5 for more information on this option.

MODIFICATIONS*

Polarization for receptacles

& plugs

S37

CATALOG NUMBER DESCRIPTION

CATALOG NUMBER

AMPS CIRCUIT

File No. E91049

Certified File No. LR14667

Wire Range

30 Amp Regular Stranding Max #10

60 Amp Regular Stranding Max #4

PR11

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

VBQ BREAKER PROTECTED INTERLOCKED RECEPTACLES

600VAC/250VDC

PR12

FEATURES-SPECIFICATIONS

VersaMate VBQ Receptacles use VersaMate

Style II plugs found on 30, 60 and 100 amp pages

and are compatible with appropriately configured

Crouse-Hinds®Arktite®or Appleton®Powertite®

plugs (when installed in accordance with instruc-

tions furnished with device).

Arktite®is a registered trademark of Crouse-Hinds®.

Powertite®is a registered trademark of Appleton®.

Receptacle:

•N4X with receptacle lid turned shut

or with plug locking ring tightened

•Plug held in place when switch is

“Off” for convenience. Pull button

operated release mechanism. Plug

does not have to be twisted to oper-

ate switch

•Dead-front construction when recep-

tacle is off. Switch cannot be turned

“ON” without fully inserted plug. Plug

cannot be removed with switch in

“ON” position

•Wire Connections do not bend when

opening and closing door – minimizes

loosening during installation

or maintenance procedures

Features

Dimensions

Enclosure:

•Spacious wiring room. Meets the

latest NEC wire bending require-

ments for circuit breaker enclosures

•Ductile Mounting Lugs to adjust to

uneven surfaces

•Copper-free construction with 316

grade Stainless Steel External

Hardware

•Quick Release Cover Bolts with Triple

Leads – only 3-1/2 turns to

disengage

•Recessed Flange Notches – Allows

easier cover opening with prying

instrument without flange damage

•Aluminum lacquer paint finish for cor-

rosion resistance

•Visible “ON” external Breaker Handle

has provisions for locking “ON” or

“OFF” with up to three Padlocks

•Internal Lock-Off provision for main-

tenance when no hazardous materi-

als are present

File No. E184637

Receptacle assembly

is field replaceable for

maintenance.

Ordering information listed

in the instruction sheets

provided with the product.

Class I, Div. 1 & 2, Groups B,C,D

Class I, Zones I & 2, Groups IIB+H2, IIA

Class II, Div. 1 & 2, Groups F & G

Class lll

NEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)

Note: The VBQ series is B7EC enclosure

based. See page E-13 for additional

dimensional information.

Replacement Parts:

•Enclosure gasket VBQ-535

•External handle kit CBHK-100H

See instruction sheet included with

device for other available replace-

ment parts.

PR12

MODIFICATIONS1

Internal Lock-Off

provision for

maintenance when

no hazardous

materials are present

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

VBQ BREAKER PROTECTED INTERLOCKED RECEPTACLES

600VAC/250VDC

PR13

FEATURES-SPECIFICATIONS

Circuit Breaker Wire Range

Square D To 30 Amp #14-4 cu.; 35-100 Amp #14-1/0 cu.

Cutler-Hammer To 20 Amp #14-10 cu.; 30-100 Amp #14-1/0 cu.

Consult Breaker Manufacturer literature for Horsepower Ratings.

†DC ratings apply to substantially non-inductive circuits.

*Pending breaker style change.

RECEPTACLE CIRCUIT BREAKER

CATALOG NUMBER

Polarization for receptacles & plugs

Drain

Breather

Drain and Breather (CSA Groups C & D)

S37

SU10

SU11

SU3

CATALOG NUMBER DESCRIPTION

1See page PR5 and price sheet for more information on these options.

VBQ RECEPTACLES

SQUARE D SQUARE D CUTLER-HAMMER CUTLER-HAMMER VERSAMATE

FAL (480 VAC MAX.) FHL (600 VAC MAX.) EHD (480 VAC MAX.) FD (600 VAC MAX.) PLUG

20 VBQ3023SN20 VBQ3023SH20 VBQ3023CN20 VBQ3023CH20 VP3385

30 VBQ3023SN30 VBQ3023SH30 VBQ3023CN30 VBQ3023CH30 VP3385

2W3P 40 VBQ3023SN40 VBQ3023SH40 VBQ3023CN40 VBQ3023CH40 VP3385

30 50 VBQ3023SN50 VBQ3023SH50 VBQ3023CN50 VBQ3023CH50 VP3385

20 VBQ3034SN20 VBQ3034SH20 VBQ3034CN20 VBQ3034CH20 VP3485

30 VBQ3034SN30 VBQ3034SH30 VBQ3034CN30 VBQ3034CH30 VP3485

3W4P 40 VBQ3034SN40 VBQ3034SH40 VBQ3034CN40 VBQ3034CH40 VP3485

50 VBQ3034SN50 VBQ3034SH50 VBQ3034CN50 VBQ3034CH50 VP3485

50 VBQ6023SN50 VBQ6023SH50 VBQ6023CN50 VBQ6023CH50 VP6385

60 VBQ6023SN60 VBQ6023SH60 VBQ6023CN60 VBQ6023CH60 VP6385

2W3P 70 VBQ6023SN70 VBQ6023SH70 VBQ6023CN70 VBQ6023CH70 VP6385

90 VBQ6023SN90 VBQ6023SH90 VBQ6023CN90 VBQ6023CH90 VP6385

100 VBQ6023SN100 VBQ6023SH100 VBQ6023CN100 VBQ6023CH100 VP6385

50 VBQ6034SN50 VBQ6034SH50 VBQ6034CN50 VBQ6034CH50 VP6485

60 VBQ6034SN60 VBQ6034SH60 VBQ6034CN60 VBQ6034CH60 VP6485

3W4P 70 VBQ6034SN70 VBQ6034SH70 VBQ6034CN70 VBQ6034CH70 VP6485

90 VBQ6034SN90 VBQ6034SH90 VBQ6034CN90 VBQ6034CH90 VP6485

100 VBQ6034SN100 VBQ6034SH100 VBQ6034CN100 VBQ6034CH100 VP6485

50 VBQ1023SN50 VBQ1023SH50 VBQ1023CN50 VBQ1023CH50 VP10387

70 VBQ1023SN70 VBQ1023SH70 VBQ1023CN70 VBQ1023CH70 VP10387

2W3P 90 VBQ1023SN90 VBQ1023SH90 VBQ1023CN90 VBQ1023CH90 VP10387

100 VBQ1023SN100 VBQ1023SH100 VBQ1023CN100 VBQ1023CH100 VP10387

100

50 VBQ1034SN50 VBQ1034SH50 VBQ1034CN50 VBQ1034CH50 VP10487

70 VBQ1034SN70 VBQ1034SH70 VBQ1034CN70 VBQ1034CH70 VP10487

3W4P 90 VBQ1034SN90 VBQ1034SH90 VBQ1034CN90 VBQ1034CH90 VP10487

100 VBQ1034SN100 VBQ1034SH100 VBQ1034CN100 VBQ1034CH100 VP10487

File No. E184637

Class I, Div. 1 & 2, Groups B,C,D

Class I, Zones I & 2, IIB+H2, IIA

Class II, Div. 1 & 2, Groups F & G

Class lll

NEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)

Circuit Breaker 208/240 480 VAC 600 VAC 250 VDC†

Interrupting Ratings VAC

Square D FAL(HDL*) 25,000 18,000 —— 10,000

Square D FHL(HGL*) 65,000 25,000 18,000 10,000

Cutler-Hammer EHD 18,000 14,000 —— 10,000

Cutler-Hammer FD 65,000 25,000 18,000 10,000

PR13

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

VSI NON-METALLIC PLUGS AND SWITCHED RECEPTACLES

PR14

FEATURES-SPECIFICATIONS

Class I, Div. 2, Groups A,B,C,D

Class I, Zones 1 & 2, Groups llC, llB, llA

AEx de IIC T6

Class II, Div. 1 & 2, Groups E,F,G

Class III

NEMA 3, 4, 4X, IP66

APPROVED

Certified - File LR240743

See files for details or call Killark

File 3014299

CATALOG NUMBER

2 Pole

3 Wire

3 Pole

4 Wire

4 Pole

5 Wire

Applications

•For use in hazardous and corrosive

environments such as refineries,

chemical plants, water treatment and

bio gas plants, and wherever a com-

bustible gas-air mixture or com-

bustible dust may occur

Features

•Color coding and pin configuration

makes it physically impossible to

mate plugs and receptacles of

different voltages and current ratings

•Interlocked switch mechanism

prevents accidental removal of plug

from receptacle under load

•Horsepower rated disconnect switch

•Dust caps* included with 20A and

30A plugs as standard

•No seal required within Class I, Division

2 applications.

•Provision for up to two optional auxilliary

contact blocks, useful for signaling cir-

cuits or starter coils.3

•Dimensional information - page PR16.

VSI SERIES PLUGS & SWITCHED RECEPTACLES

TECHNICAL DATA

AC VOLTAGE AND

COLOR CODE

125 Yellow

250 Blue

480 Red

3 Ø 250 Blue

3 Ø 480 Red

3 Ø 600 Black

3 ØY 120/208 Blue

3 ØY 277/480 Red

3 ØY 347/600 Black

DESCRIPTION

RECEPTACLE

VSI20R304

VSI20R306

VSI20R307

VSI20R409

VSI20R407

VSI20R405

VSI20R509

VSI20R507

VSI20R505

PLUG

VSI20P304

VSI20P306

VSI20P307

VSI20P409

VSI20P407

VSI20P405

VSI20P509

VSI20P507

VSI20P505

PLUG

—

VSI30P409

VSI30P407

VSI30P405

VSI30P509

VSI30P507

VSI30P505

RECEPTACLE

—

VSI30R409

VSI30R407

VSI30R405

VSI30R509

VSI30R507

VSI30R505

30 AMP2

20 AMP1

PARTS AND ACCESSORIES3

Auxiliary Contact Block NC, A6004

Auxiliary Contact Block NO, A6004

PART NUMBER

VSIAUXNC

VSIAUXNO

410A rating for one auxiliary block; 5A if two are

used. Position noted (NC or NO) is when main

switch is off.

Snap into side(s) of terminal block

RECEPTACLE

ENCLOSURE MATERIAL

AMBIENT TEMPERATURE,Ta

TERMINAL CAPACITY

SWITCH RATING (HORSEPOWER)

120 VAC

240 VAC

480 VAC

600 VAC

LINE SUPPLY FUSE

BOTTOM ENTRY

POLYAMIDE

-30°C (-22°F) TO +55°C (131°F)

2 wires, rated 75°C (Ta<45°C) or 90°C (Ta>45°C)

CLASS J - size per NEC/CEC requirement

20 AMP

16-10 AWG

3/4” NPT

30 AMP

14-8 AWG

3-phase

—

10 HP

20 HP

25 HP

1” NPT

1-phase

1.5 HP

3 HP

5 HP

3-phase

—

5 HP

10 HP

15 HP

TECHNICAL DATA

PLUG

ENCLOSURE MATERIAL

TERMINAL CAPACITY

CORD OUTER DIA.

POLYAMIDE

1 wire, rated 75°C (Ta<45°C) or 90°C (Ta>45°C)

20 AMP

16-10 AWG

0.3” - 0.8”

30 AMP

14-8 AWG

0.6” - 1.1”

1VSI 20A devices are compatible with prior 16A models. However, the rating of the loweramperage will apply.

2VSI 30A devices are compatible with prior 32A models. Ratings of the lower amperagewill apply.

*Dust caps shall be installed on plugs with receptacle cover closed when the plug is not engaged in the receptacle.

PR14

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

VSI NON-METALLIC PLUGS AND SWITCHED RECEPTACLES PR15

FEATURES-SPECIFICATIONS

Class I, Div. 2, Groups A,B,C,D

Class I, Zones 1 & 2, Groups llC, llB, llA

AEx de IIC T6

Class II, Div. 1 & 2, Groups E,F,G

Class III

NEMA 3, 4, 4X, IP66

APPROVED

Dust cap shall be installed on the plug when

the plug is not engaged in the receptacle.

PLUG DUST CAP

FOR PLUG TYPE CATALOG NUMBER

VSI63P4__ VSI63801140

VSI63P5__ VSI63801140

VSI125P4__ VSI125801140

VSI125P5__ VSI125801140

CATALOG NUMBER

63 AMP 125 AMP

3 Pole

4 Wire

4 Pole

5 Wire

VSI SERIES PLUGS & SWITCHED RECEPTACLES

AC VOLTAGE AND

COLOR CODE

3 Ø 250 Blue

3 Ø 480 Red

3 Ø 600 Black

3 ØY 120/208 Blue

3 ØY 277/480 Red

3 ØY 347/600 Black

DESCRIPTION

PLUG

VSI63P409

VSI63P407

VSI63P405

VSI63P509

VSI63P507

VSI63P505

RECEPTACLE

VSI63R409

VSI63R407

VSI63R405

VSI63R509

VSI63R507

VSI63R505

PLUG

VSI125P409

VSI125P407

VSI125P405

VSI125P509

VSI125P507

VSI125P505

RECEPTACLE

VSI125R409

VSI125R407

VSI125R405

VSI125R509

VSI125R507

VSI125R505

Applications

•For use in hazardous and corrosive

environments such as refineries,

chemical plants, water treatment and

bio gas plants, and wherever a com-

bustible gas-air mixture or com-

bustible dust may occur

•When VSI Series is installed in Class

II Div. 1 & 2 locations, dust caps for

plugs are required. See ordering

information below

Features

•Color coding and pin configuration

makes it physically impossible to

mate plugs and receptacles of

different voltages and current ratings

•No seals required within Class I, Div.

2 applications

•Interlocked switch mechanism

prevents accidental removal of plug

from receptacle under load

•Horsepower rated disconnect switch

includes 1 auxiliary contact (late

make, early break) for signaling cir-

cuits.

•63A, 125A models

Dimensional Information

•See page PR16

VSI non-metallic devices NOT intermateable with Versamate® NEC metallic series.

TECHNICAL DATA

RECEPTACLE

ENCLOSURE MATERIAL

AMBIENT TEMPERATURE,Ta

TERMINAL CAPACITY

SWITCH RATING (HORSEPOWER)

120 VAC

240 VAC

480 VAC

600 VAC

LINE SUPPLY FUSE

BOTTOM ENTRY

FIBER REINFORCED POLYESTER

-20°C (-4°F) TO +40°C (104°F)

2 wires, 90°C rated

CLASS J - size per NEC/CEC requirement

63 AMP

6-1/0 AWG

3-phase

10 HP

20 HP

40 HP

60 HP

1-1/2” NPT

125 AMP

1/0-3/0 AWG

3-phase

20 HP

40 HP

100 HP

125 HP

2” NPT

TECHNICAL DATA

PLUG

ENCLOSURE MATERIAL

TERMINAL CAPACITY

CORD OUTER DIA.

POLYAMIDE

1 wire, 90°C rated

63 AMP

10-4 AWG

0.94” - 1.4”

125 AMP

6-1/0 AWG

1.2” - 2”

Certified - File LR240743

See files for details or call Killark

File 3014299

PR15

VSI NON-METALLIC PLUGS AND SWITCHED RECEPTACLES

PR16

13.5”(342 mm)

RECEPTACLE & PLUG 63A

3 POLE - 4 WIRE AND 4 POLE - 5 WIRE RECEPTACLE & PLUG 125A

3 POLE - 4 WIRE AND 4 POLE - 5 WIRE

.35”(9 mm)

.35”

(9 mm)

6”

(152 mm)

7. 1 ”

(180 mm)

.51”

(13 mm)

16”

(407 mm)

8.3”

(211 mm)

19.4”(493 mm)

.43”(11 mm)

.43”

(11 mm)

8.7”

(220 mm)

10.7”

(270 mm)

.8”

(20.5 mm)

21.8”

(553 mm)

12.0”

(296 mm)

4.1” (104 mm)

4.9” (125 mm) .24”

(6 mm)

9.8” (248 mm)

6.25” (159 mm)

.47” (12 mm)

7.12” (181 mm)

4.0” (103 mm)

3.7” (94 mm)

4.52” (115 mm) .24”

(6 mm)

5.9” (150 mm)

.47” (12 mm)

6.6” (168 mm)

.24”

(6 mm)

3.66” (93 mm)

4.13” (105 mm)

9.13” (232 mm)

.24”

O.D. 3” (76 mm)

6.9” (176 mm)

O.D. 2.4”

(60 mm)

RECEPTACLE 20A

2 POLE - 3 WIRE

PLUG 20A RECEPTACLE 20A

3 POLE - 4 WIRE AND 4 - POLE 5 WIRE

4.9” (124 mm)

5.9” (150 mm) .24”

(6 mm)

.47” (12 mm)

8.15” (207 mm)

.24”

(6 mm)

4.8” (123 mm)

5.3” (135 mm)

11.1” (281 mm)

O.D. 3.9” (99 mm) - 4 Wire

O.D. 4” (102 mm) - 5 Wire

8.03” (204 mm)

O.D. 2.8”

(72 mm)

RECEPTACLE 30A

3 POLE - 4 WIRE AND 4 POLE - 5 WIRE PLUG 30A

Dimensions

NOTE: Drawings are not to scale

10.6”

(268.5 mm)

4.4”

(112 mm)

2.7”

(69.5 mm)

3.3” (84 mm)

4.9”

(125 mm)

3.2”

(82 mm)

12.2”

(310.5 mm)

3.8” (96 mm)

4.5” (115 mm)

7.4” (188 mm)

PR16

VERSAMATE®SERIES • PLUGS AND RECEPTACLES

VCR CLEAN ROOM RECEPTACLES PR17

FEATURES-SPECIFICATIONS

Suitable for:

Class I, Div. 2, Groups A,B,C,D

Class I, Zones 1 & 2, Groups IIC, IIB, IIA

Class II, Div. 1 & 2, Groups E,F,G

Class III

NEMA 3

CENELEC-EEx de IIC T6 IP54

Applications

•Designed specifically for hazardous

location clean rooms, such as found

in the pharmaceutical industry,

where equipment must be easy to

clean and free of contaminant hold-

ing cavities. Electrical devices

should also be flush wall mounted,

with concealed wiring, to minimize

contamination.

•VSI20P and VSI30P series plugs

include debris caps, which are re-

quired in Class II Div.1 and 2 locations.

Features

• Available with single or duplex

receptacles, in 16 or 32 amps with

a variety of voltage and pin

configurations 2

• Flush mounting, smooth contours

for easy cleaning

•Hazardous locations suitability

• Enclosure made of stainless steel

with concealed EPDM gasketing

• Cover is hinged on left side.

Provides access with loosening of 2

screws

• Color coding and pin configuration is

compliant to IEC 60309-2.

• Interlocked switch mechanism pre-

vents accidental removal of plug

from receptacle under load.

• Explosion protected disconnect

switch requires protection by Class

“J” fuse (upstream), 20A max. for

16A receptatcle, 40A max. for 32A

receptacle.

CATALOG NUMBER

2 Pole

3 Wire

3 Pole

4 Wire

4 Pole

5 Wire

VCR SERIES CLEANROOM RECEPTACLES

AC VOLTAGE AND

COLOR CODE

125 Yellow

250 Blue

480 Red

3 Ø 250 Blue

3 Ø 480 Red

3 Ø 600 Black

3 ØY 120/208 Blue

3 ØY 277/480 Red

3 ØY 347/600 Black

DESCRIPTION

II 2G EEx ed IIC T5/T6, IP65

PTB No. 01 ATEX 1001

—

VCR32R409

VCR32R407

VCR32R405

VCR32R509

VCR32R507

VCR32R505

OFF

VSI20P304

VSI20P306

VSI20P307

VSI20P409

VSI20P407

VSI20P405

VSI20P509

VSI20P507

VSI20P505

VCR16R304

VCR16R306

VCR16R307

VCR16R409

VCR16R407

VCR16R405

VCR16R509

VCR16R507

VCR16R505

—

VSI30P409

VSI30P407

VSI30P405

VSI30P509

VSI30P507

VSI30P505

32 AMP1

16 AMP1

RECEPTACLE PLUG2RECEPTACLE PLUG2

1VCR catalog numbers shown in table are for SINGLE receptacles. For duplex units, add second

receptacle configuration to catalog number.

Example: VCR32R409-16R304

Left Receptacle Position

Right

Receptacle Position

Single/Duplex

Receptacle

Profile

Single

Receptacle

Duplex

Receptacle

Duplex Receptacle

220A plugs fit 16A receptacles; 30A plugs fit 32A receptacles.

VCR non-metallic plugs NOT intermateable with VersaMate®NEC metallic series.

PR17

KR SERIES • PLUGS AND RECEPTACLES

HAZARDOUS LOCATION - DELAYED ACTION

PR18

FEATURES-SPECIFICATIONS

Listed E23572

Certified LR146671

Class I, Div. 1 & 2, Groups C,D

Class l, Zones 1 & 2, llB,llA

NEMA 7 (C,D)

ELECTRICAL RATINGS

Applications

KR Series plugs and receptacles are

suitable:

•In hazardous locations due to the

presence of flammable vapors or

gases

•Where a heavy duty plug and recep-

tacle is necessary

•Where a connection is required for

portable or movable equipment such

as tools, motors, hand lights, etc.

•KP series plugs use solder termina-

tions for sure connection

•KR series receptacles use wire leads

for termination

Features

•Factory sealed receptacles

•Copper free aluminum

•Straight or angle type receptacles

•Delayed action contacts (See Time

Delay Inset)

•Plugs with a wide range of grommet

openings

•Extra long grounding pole makes

contact first and breaks contact last

•Heavy duty construction to withstand

rough and constant usage

Selection

Refer to page headings for suitability of

specific items. When selecting a Killark

device consider the following:

(A) Installation area (Hazardous or

Weather-Resistant)

(B) Amperage

(D) Electrical Rating (see below)

(E) Grounding

(G) Modifications (see right)

(H) Mounting arrangement

(I) Box and hub type

(J) Cord diameter

Details of Safety

Time Delay Feature

The key slot provided in the receptacle

engages the key of the plug permitting

entrance of the plug in the receptacle

in only one position. See steps 1-4.

The contacts are enclosed in long

accurate insulating cavities. It is in

these cavities that the arcs are extin-

guished. All contacts are made through

round tellurium copper tubing which is

extra heavy to withstand arcing as

required on the various ampere ratings.

Both plugs and receptacles are

equipped with an extra long grounding

pole which establishes grounding

before the power contacts are

engaged. These grounding poles are

also the last to break contact. This

assures bonding of the portable device

to the electrical conduit system.

Selection

Modifications are available by adding

the following suffix to the catalog num-

ber. (Note: It must be added to both

the plug and the receptacle so they

will mate.)

TYPE AMPERAGE VOLTAGE VAC CIRCUIT H.P. HERTZ

120 AMP 20 115/230 2W3P 1 60

7 460 2W3P 1/2 60

7 460 3W4P 1 60

30 AMP 30 115/230 2W3P 1-1/2 60

30 115/230 3W4P 3 60

30 460 2W3P 3 60

30 460 3W4P 5 60

60 AMP 60 115/230 2W3P 5 60

60 115/230 3W4P 5 60

Safety Time Delay Feature

MODIFICATIONS

Interior contact assem-

blies are to be rotated 22-

1/2° to the right.

SU37

Interior contact assem-

blies are to be rotated

22-1/2° to the left.

SU38

CATALOG NUMBER DESCRIPTION

Plug then can be moved

completely in and be energized

Receptacle Keyway

Key Plug

Plug can move in only to the

first step of the keyway until...

Align Keyway on plug with receptacle.

...key is moved up

1CSA approval on 20 Amp only.

PR18

KR SERIES • PLUGS AND RECEPTACLES

20 AMP/115/230 V.A.C. • 1Ø 2 WIRE, 3 POLE PR19

FEATURES-SPECIFICATIONS

KRJ RECEPTACLE WITH AJ OR JL BOX

KRS 20A 1Ø 2W RECEPTACLE WITH SWB BOX2

ELECTRICAL RATING

Listed File No. E23572

Certified File No. LR14667

CIRCUIT RATING (60 HERTZ)

1Ø 20 AMPS 115/230 V.A.C. 1 H.P.

2W3P

CATALOG NUMBER

KRS Series KRA

CATALOG NUMBER

AJC JLC JLX

— KRJC-120 KRJX-120

KRAJC-220 KRJC-220 KRJX-220

KRAJC-320 — —

HUB

SIZE

1/2"

3/4"

HUB

SIZE

1/2"

3/4"

KP 20 AMP PLUG

CATALOG NO. DESCRIPTION

Plug furnished with

KP-20ABC 3 grommets range .250 - .625

KRS-Series

BACK BOX ONLY

1/2" —JLC-1 JLX-1

3/4" AJC-2 JLC-2 JLX-2

1" AJC-3 ——

RECEPTACLE ONLY - CATALOG NUMBER KRJ-20

JL Series boxes shown on page F60. Refer to page headings for suitability of

specific items.

See page PR18 for available polarization options.

Plug

RECEPTACLE ONLY - CATALOG NUMBER KRS-20

1KRS Series receptacles - Class I, Group D.

2SWB Series mounting splice boxes only for receptacles shown above listed on page C19.

See page PR18 for available polarization options.

AJC JLX

JLC

KRJ-Series

See page PR18 for available polarization

options.

SINGLE

RECEPTACLE &

DEAD END BOX

BOX

ONLY

SINGLE

RECEPTACLE &

FEED-THRU BOX

BOX

ONLY

KRS-215-120

KRS-215-220

KRS-215-320

SWB-1

SWB-2

SWB-3

SWB-4

SWB-5

SWB-6

KRS-218-120

KRS-218-220

KRS-218-320

DOUBLE

RECEPTACLE &

DEAD END BOX

BOX

ONLY

DOUBLE

RECEPTACLE &

FEED-THRU BOX

2KRS-215-120

2KRS-215-220

2KRS-215-320

SWB-7

SWB-8

SWB-9

BOX

ONLY

SWB-10

SWB-11

SWB-12

2KRS-218-120

2KRS-218-220

2KRS-218-320

Class I, Div. 1 & 2, Groups C,D1

Class l, Zones 1 & 2, llB,llA

NEMA 7 (C,D)

PR19

KR SERIES • PLUGS AND RECEPTACLES

30 AMP 115/230 V.A.C. 7 AMP 460 V.A.C.

PR20

FEATURES-SPECIFICATIONS

Class I, Div. 1 & 2, Groups C,D1

Class I, Zones 1 & 2, llB, llA

NEMA 7 (C,D)

Listed - File E23572

See files for details or call Killark.

KRS/KRJ SERIES PLUG

KRA SeriesKRS Series Plug

KRJ RECEPTACLE WITH AJ OR JL BOX

KP 30 AMP PLUG

CATALOG NUMBER

1Ø, 2-WIRE, 3Ø, 3-WIRE PLUG GROMMET

3-POLE 4-POLE TYPE RANGE

KP-303D23 KP-304D23 D .375-.625

KP-303D45 KP-304D45 D .625-.875

KP-303E45 KP-304E45 E .875-1.125

KP-303E67 KP-304E67 E 1.125-1.375

ELECTRICAL RATING

CIRCUIT RATING (60 HERTZ)

7 Amps 460 V.A.C. 1¼2 H.P.

– OR –

30 Amps 115/230 V.A.C. 1-1¼2 H.P.

7 Amps 460 V.A.C. 1 H.P.

– OR –

30 Amps 115/230 V.A.C. 3 H.P.

HUB CATALOG NUMBER

SIZE AJC JLC JLX

1/2" — KRJC-1303 KRJX-1303

3/4" KRAJC-2303 KRJC-2303 KRJX-2303

1" KRAJC-3303 — —

1/2" — KRJC-1304 KRJX-1304

3/4" KRAJC-2304 KRJC-2304 KRJX-2304

1" KRAJC-3304 — —

1/2" — JLC-1 JLX-1

3/4" AJC-2 JLC-2 JLX-2

1" AJC-3 — —

1Ø

2-Wire

3-Pole

3Ø

3-Wire

4-Pole

Back

Box

Only

KRS RECEPTACLE WITH SWB BOX2

1 Ø

2-Wire

3-Pole

3 Ø

3-Wire

4-Pole

D Type

CIRCUIT

JL Series boxes shown on page F60. Refer to page headings for suitability of specific items.

See page PR18 for available polarization options.

RECEPTACLE

ONLY

AJC JLX

JLC

KRS-Series

E Type

KRJ-Series

RECEPTACLE ONLY- CATALOG NUMBER KRJ-303

RECEPTACLE ONLY- CATALOG NUMBER KRJ-304

See page PR18 for available

polarization options.

1Ø, 2-WIRE,

3-POLE

DEAD END BOX

BOX

ONLY

1Ø, 2-WIRE,

3-POLE

FEED THRU BOX

BOX

ONLY

KRS-215-1303

KRS-215-2303

KRS-215-3303

SWB-1

SWB-2

SWB-3

SWB-4

SWB-5

SWB-6

KRS-218-1303

KRS-218-2303

KRS-218-3303

3Ø, 3-WIRE,

4-POLE

DEAD END BOX

BOX

ONLY

3Ø, 3-WIRE,

4-POLE

FEED THRU BOX

BOX

ONLY

KRS-215-1304

KRS-215-2304

KRS-215-3304

SWB-1

SWB-2

SWB-3

SWB-4

SWB-5

SWB-6

KRS-218-1304

KRS-218-2304

KRS-218-3304

CATALOG NUMBER - SINGLE GANG ONLY

KRS-303 KRS-304

1KRS Series receptacles - Class I, Group D.

2SWB Series mounting splice boxes for receptacles shown above listed on page C19.

Two gang models not available.

See page PR18 for available polarization options.

HUB

SIZE

1/2"

3/4"

PR20

KR SERIES • PLUGS AND RECEPTACLES

60 AMP/115/230 V.A.C. • 30 AMP/460 V.A.C. PR21

FEATURES-SPECIFICATIONS

Listed File No. E23572

KRJ Series KRA Series Plug

Class I, Div. 1 & 2, Groups C,D

Class l, Zones 1 & 2, llB,llA

NEMA 7 (C,D)

KR RECEPTACLE ASSEMBLIES

JAL TYPE MOUNTING BOXES

CATALOG NUMBER

1Ø, 2-WIRE 3Ø, 3-WIRE SPLICE

3-POLE 4-POLE BOX ONLY

KRJX-3603 KRJX-3604 JALX-3

KRJX-4603 KRJX-4604 JALX-4

—— —

KRAJAC-4603 KRAJAC-4604 AJAC-4

KRAJAC-5603 KRAJAC-5604 AJAC-5

KRAJAC-6603 KRAJAC-6604 AJAC-6

KRAJAT-4603 KRAJAT-4604 AJAT-4

KRAJAT-5603 KRAJAT-5604 AJAT-5

KRJ-603 KRJ-604 —

HUB

SIZE

1-1/4"

1-1/2"

1-1/4"

1-1/2"

HUB

STYLE

“X”-3 Close-up

Plugs Supplied

Feed Thru

Top and

Bottom

T Sides and Top

JAL Series

Boxes

AJA Series

Boxes

KP Type Plugs

KRJ-60 Type Receptacles

JAL Type

HUB A B C D E H

1" 2-3/8" 1-5/32" 4-5/8" 5-1/4" 4-1/8" 5/16"

1-1/4" 3-1/8" 1-17/32" 4-5/8" 5-1/4" 4-1/8" 5/16"

Dimensions-Back Boxes

AJAC Types

AJAT Type

KR 60 AMP PLUGS

CATALOG NUMBER

1Ø, 2-WIRE, 3Ø, 3-WIRE GROMMET

3-POLE 4-POLE RANGE

KP-603D345 KP-604D345 .500-.875

KP-603E45 KP-604E45 .875-1.125

KP-603E67 KP-604E67 1.125-1.375

— KP-604F34 1.250-1.500

— KP-604F56 1.500-1.750

ELECTRICAL RATING

CIRCUIT RATING (60 HERTZ)

30 Amps 460 V.A.C. 3 H.P.

– OR –

60 Amps 115/230 V.A.C. 3 H.P.

30 Amps 460 V.A.C. 5 H.P.

– OR –

60 Amps 115/230 V.A.C. 5 H.P.

1 Ø

2-Wire

3-Pole

3 Ø

3-Wire

4-Pole

RECEPTACLE ONLY

BOX

STYLE

NOTE: For dead end box, use AJAC Series and CUP Series close-up plug.

See page PR18 for available polarization options.

See page PR18 for available polarization

options.

PR21

ACCEPTOR®SERIES • PLUGS AND RECEPTACLES

UGR/UGP INTERCHANGEABLE BLADE STYLE

PR22

FEATURES-SPECIFICATIONS

The ACCEPTOR®UGP/UGR Plug and

Receptacle system, with its unique,

patented design, is interchangeable1

with other NEMA bladed type explo-

sion-proof and dust ignition proof

devices. The series has been tested

and classified for use with Crouse-

Hinds®Ark-Gard®2 and Appleton®U-

Line®plugs and receptacles in haz-

ardous locations.

No w available in

GFCI version. See page PR26.

How The Acceptor System Works

ACCEPTOR receptacles contain an

integral switch which must be closed to

energize the circuit. The design

permits only an approved plug to be

energized. To actuate the switch, the

plug must be inserted and rotated

clockwise approximately 45o. The plug

will lock into this position preventing

accidental disengagement. To remove,

simply push in then turn the plug coun-

terclockwise and pull straight out.

Plugs and receptacles may be used

where interchangeable bladed devices

are needed in locations made haz-

ardous by the presence of flammable

gases or vapors, combustible dusts or

easily ignitable fibers and flyings.

Plug can serve to provide power

for portable equipment used in both

hazardous and non-hazardous areas.

Applications

•Petroleum Refineries

•Chemical Plants

•Wet/Damp Areas

•Corrosive Environments

•Petroleum Plants

•Grain Elevators/Feed Mills

•Flour and Feed Mills

•Indoor or Outdoor Locations

Features

•All external hardware is 316 stainless steel

to provide low maintenance and long life

•Factory sealed chamber in UGR recepta-

cle contains switch's arcing components

•No additional external seals are required,

except in Group B

applications

Quick Wiring Plug

•Single piece shell for fewer parts

•Transparent wiring entrance holes for easy

conductor insertion

•Screws tighten from side with “full sized”

screwdriver

Class I, Div. 1 & 2, Groups B2,C,D

Class I, Zones 1 & 2, Groups IIB+H2, IIA

Class II, Div. 1 & 2, Groups F,G

Class III

NEMA 3, 7 (B,C,D), 9 (F,G)

Listed File No. E91049 and/or E53660

Certified File No. LR14667

•Receptacles are U.L. Listed as

raintight. Proper sealing against

moisture is assured

•Spring loaded receptacle cover clos-

es when plug is removed to provide

protection when not in use

•Copper-free aluminum (less than

4/10 of 1%) alloy resists corrosion

•Electrostatically applied and baked

powder epoxy/polyester finish

PLUG

ACCEPTOR®plugs conform to NEMA

configurations and can be used with

standard receptacles in non-hazardous

areas to maximize equipment utilization.

The system's “turn to engage” feature

1.51"1.69"

2.55"

2Plugs Rated Group B when used with properly rated &

installed receptacles. See next page.

1Exact models classified for interchangeability are

listed in the information sheet provided with the

products. Ark-Gard®is a registered trademark of

Crouse-Hinds®. U-Line®is a registered trademark

of Appleton Electric Company®.

UGP-15231 UGP-15231QW

UGP-15232 UGP-15232QW

NEMA

CONFIGURATION

locks in plug and can be used to pre-

vent accidental disengagement of criti-

cal equipment.

Plugs for use with type S, SO, ST or

STO heavy duty cord.

15 AMP PLUG

W/QUICK WIRING

15 AMP

PLUG

CATALOG NUMBER

20 AMP PLUG

W/QUICK WIRING

20 AMP

PLUG

CATALOG NUMBER

UGP-20231 UGP-20231QW

UGP-20232 UGP-20232QW

NEMA

CONFIGURATION

VOLTAGE

125VAC

250VAC

kbt>

Quick Wiring Plug

PR22

RECEPTACLES AND ASSEMBLIES4

ACCEPTOR®SERIES • PLUGS AND RECEPTACLES

UGR INTERCHANGEABLE BLADE STYLE PR23

—

1/2"

3/4"

1/2”

3/4"

—

1/2"

3/4"

1/2”

3/4"

HUB

SIZE

RECEPTACLE ONLY

DEAD END

FEED-THRU

RECEPTACLE ONLY

DEAD END

FEED-THRU

ENCLOSURE

STYLE

NEMA RATING

& CONFIGURATION

1Items in this column are suitable for Class I, Group B in addition to Class I, Groups C, D.

Also suitable for Class I, Zone 1, Groups IIB+H2, IIA.

2Seals must be installed within 6 inches of conduit opening.

3Items in this column may also be used in Class I, Zone 1, Groups IIB, IIA.

Assembly numbers not rated for Group B are shipped as receptacle & back box components.

4Refer to page C19 for additional SWB Series Back Box configurations.

5Canada only configuration

6Canadian Codes now allow “T” combination slots for 15A or 20A plugs. Check breaker and wire feed size for proper application ratings.

NOTE: For replacement receptacle cover and hinge, order KIT-173.

2 POLE

3 WIRE

2 POLE

3 WIRE

—

1/2"

3/4"

1/2”

3/4"

RECEPTACLE ONLY

DEAD END

FEED-THRU

2 POLE

3 WIRE

—

1/2"

3/4"

1/2”

3/4"

RECEPTACLE ONLY

DEAD END

FEED-THRU

2 POLE

3 WIRE

20 Amp

125 Volt

20 Amp

250 Volt

15 Amp

250 Volt

15 Amp

125 Volt

5-20R

5-15R

6-15R

6-20R

UGRO-20231

UGR7-20231

UGR8-20231

UGR9-20231

UGR10-20231

UGR11-20231

UGR12-20231

UGROC-15231

UGR7C-15231

UGR8C-15231

UGR9C-15231

UGR10C-15231

UGR11C-15231

UGR12C-15231

UGRO-20232

UGR7-20232

UGR8-20232

UGR9-20232

UGR10-20232

UGR11-20232

UGR12-20232

UGROC-15232

UGR7C-15232

UGR8C-15232

UGR9C-15232

UGR10C-15232

UGR11C-15232

UGR12C-15232

UGRO-20231

UGR1-20231

UGR2-20231

UGR3-20231

UGR4-20231

UGR5-20231

UGR6-20231

UGROC-15231

UGR1C-15231

UGR2C-15231

UGR3C-15231

UGR4C-15231

UGR5C-15231

UGR6C-15231

UGRO-20232

UGR1-20232

UGR2-20232

UGR3-20232

UGR4-20232

UGR5-20232

UGR6-20232

UGROC-15232

UGR1C-15232

UGR2C-15232

UGR3C-15232

UGR4C-15232

UGR5C-15232

UGR6C-15232

—

UGRB1-20231

UGRB2-20231

UGRB3-20231

UGRB4-20231

UGRB5-20231

UGRB6-20231

—

UGRB1C-15231

UGRB2C-15231

UGRB3C-15231

UGRB4C-15231

UGRB5C-15231

UGRB6C-15231

—

UGRB1-20232

UGRB2-20232

UGRB3-20232

UGRB4-20232

UGRB5-20232

UGRB6-20232

—

UGRB1C-15232

UGRB2C-15232

UGRB3C-15232

UGRB4C-15232

UGRB5C-15232

UGRB6C-15232

SINGLE GANG12

GROUPS B, C, D, F & G

SINGLE GANG34

GROUPS C, D, F, & G

DOUBLE GANG34

GROUPS C D, F, & G

SWB-1, 2, 3 SWB-4, 5, 6 Single Gang Double Gang

PR23

PR24

NEMA CONFIGURATION CATALOG NUMBER WEATHER RATING

125V CONNECTOR CAP STYLE

250V CONNECTOR CAP STYLE

20 Amp

125 Volt

2 POLE

3 WIRE

20 Amp

250 Volt

2 POLE

3 WIRE

6-20R with T-slots

Breech-Lock with Notch

Flip Type

5-20R with T-slots

Breech-Lock with Notch

Flip Type

Killark 250V Plugs

20 Amp

15 Amp

Killark 125V Plugs

20 Amp

15 Amp

UGRC-20231B

UGRC-20231F

UGP-20231QW

UGP-15231QW

UGRC-20232B

UGRC-20232F

UGP-20232QW

UGP-15232QW

N4X*

N3**

N4X*

N3**

ACCEPTOR®SERIES • PLUGS AND RECEPTACLES

UGRC CONNECTORS

FEATURES-SPECIFICATIONS

Connector with Breech-Lock Cap “3rd Hand” Plug Operation

Class I, Div. 1 & 2, Groups B,C,D1

Class I, Zones 1 & 2, Groups IIB+H2, IIA1

Class II, Div. 1 & 2, Groups F,G2

Class III

NEMA 3, 4X*

Certified File No. LR14667

UGRC Connector

Breech cap model shown, Flip cap model dimensions

are similar

CONNECTORS

The ACCEPTOR® UGRC Connector com-

plements UGP/UGR Plugs and

Receptacles, as well as Ground Fault

Protected UGFI and UGRGF Models.

Used with Acceptor plugs, connectors can

extend the reach for hazardous location rated

portable equipment such as hand lamps.

Connectors eliminate the need for user cre-

ated corded box mounted receptacles.

UGRC Connectors are interchangeable

and classified for use with other NEMA

bladed type explosion-proof and dust

ignition proof plugs, including Crouse-

Hinds® Ark-Gard®2 and Appleton®

ULine®.

Features

•Available with the exclusive Breech-Lock

Cap (see PR3 for more info) - patented

notch provides “3rd hand” plug operation

(holds lid open while one hand operates

plug, and other holds connector).

•Factory Sealed Construction

•Suitable for 14 or 12 gauge SOOW or

similar cable

•Copper-free aluminum (less than 4/10 of

1%) alloy resists corrosion

•Electrostatically applied and baked pow-

der epoxy/polyester finish

•Dead Front Construction with integral

switch - requires Hazardous Rated NEMA

Bladed plug for operation

Ark-Gard® is a registered trademark of Crouse-Hinds®

U-Line® is a registered trademark of Appleton

Electric Company®

Industrial Applications

•Petroleum Refineries

•Chemical/Petrochemical Plants

•Oil Rigs & Platforms

•Wet/Corrosive Environments

•Grain Elevators

Dimensions

Connector shown with Acceptor UGRP receptacle mounted

in explosion proof Quantum® enclosure

8.25

2.88

3.69

*Breech cap models N4X with lid closed and turned, N3 When Plug inserted Hinge Up

**Flip Lid models N3 with hinge in UP position with or without plug

Replacement Cap and Hinge Kits: Breech KIT-173B, Flip KIT-173

1CSA certified Class I Div.I for Canada and/or other jurisditions accepting CSA.

2CCSAUS Class II, Groups F & G for US and Canada.

3Remove QW in catalog number for Standard Wiring type plug.

Flip Cap

Certified File No. LR14667

CUS

UGP Plug

PR24

PR25

FEATURES-SPECIFICATIONS

ACCEPTOR®SERIES • PLUGS AND RECEPTACLES

UGRP PANEL MOUNT RECEPTACLES

* UGRP Receptacles are available

“Factory Installed” in the following series:

Enclosures

- Series EXB, B7E

Distribution Equipment

-Series D2L, B7L Lighting Panelboards

* Contact factory for ordering information

Class I, Div. 1 & 2, Groups B,C,D1

Class I, Zones 1 & 2, Groups IIB+H2, IIA

Class II, Div. 1 & 2, Groups F,G

Class III

NEMA 3, 4X*

Certified File No. LR146672

CUS

Typical InstallationBreech Cap Model

Typical CLI Div. I

application

Typical CLI Div. 2

application

2-3/8” K.O.

Breech Caps

Flip Lids

NEMA CONFIGURATION CATALOG NUMBER WEATHER RATING

125V PANEL RECEPTACLE CAP STYLE

250V PANEL RECEPTACLE CAP STYLE

20 Amp

125 Volt

2 POLE

3 WIRE

6-20R with T-slots

Breech-Lock with Notch

Flip Type

5-20R with T-slots

Breech-Lock with Notch

Flip Type

Killark 250V Plugs***

20 Amp

15 Amp

Killark 125V Plugs***

20 Amp

15 Amp

UGRP-20231B

UGRP-20231F

UGP-20231QW

UGP-15231QW

UGRP-20232B

UGRP-20232F

UGP-20232QW

UGP-15232QW

N4X*

N3**

N4X*

N3**

*Breech cap models N4X with lid closed and turned, N3 When Plug inserted Hinge Up

**Flip Lid models N3 with hinge in UP position with or without plug

***See PR24 for Plug NEMA Diagram and Dimensions

Replacement Cap and Hinge Kits: Breech KIT-173B, Flip KIT-173

1Class I Div.1 B,C,D in enclosures certified to 325 explosive PSI (2”-11½ NPSM threads).

Class I Div. 2 in standard location enclosures using only non-arcing components.

2cCSAus Certified for United States, Canada, and other jurisdictions accepting the mark.

3Remove QW in catalog number for Standard Wiring type plug.

20 Amp

250 Volt

2 POLE

3 WIRE

Flip Cap

Breech Cap model shown.

Flip Cap model dimensions are similar

PANEL RECEPTACLES

The ACCEPTOR® UGRP Panel

Receptacle complements UGP/UGR Plugs

and Receptacles, as well as Ground Fault

Protected UGFI and UGRGF Models.

Used with Acceptor plugs, panel recepta-

cles provide local power for hazardous loca-

tion rated portable equipment such as hand

lamps. Units are suitable for Class I Div. 1

or Class I Div.2 depending on the enclo-

sure type used1.

UGRP Panel Receptacles are inter-

changeable and classified for use with

other NEMA bladed type explosion-proof

and dust ignition proof plugs, including

Crouse-Hinds® Ark-Gard®2 and

Appleton® ULine®.

Features

•Available with the exclusive Breech-Lock

Cap (see PR3 for more info) - patented

notch provides “3rd hand” plug opera-

tion (holds lid open while one hand

operates plug, and other holds connector).

•Factory Sealed Construction

•Copper-free aluminum (less than 4/10 of

1%) alloy resists corrosion

•Electrostatically applied and baked

powder epoxy/polyester finish

•Dead Front Construction with integral

switch - requires Hazardous Rated

NEMA Bladed plug for operation

Ark-Gard® is a registered trademark of Crouse-Hinds®

U-Line® is a registered trademark of Appleton

Electric Company®

Industrial Applications

•Petroleum Refineries

•Chemical/Petrochemical Plants

•Oil Rigs & Platforms

•Wet/Corrosive Environments

•Grain Elevators

Dimensions

3.69

4.50

2.94

Breech Lid

PR25

XHL INCANDESCENT

ACCEPTOR®SERIES • PLUGS AND RECEPTACLES

ADAPTER AND ACCESSORIES

PR26

FEATURES-SPECIFICATIONS

UGRA ADAPTER KIT

XHL SERIES HAND LAMPS

UNIVERSAL ADAPTER KIT

ACCEPTOR®receptacles are available

with an adapter kit for mounting to

Crouse-Hinds®EDS Series or Appleton®

EFD Series back boxes.

ACCEPTOR receptacles properly

installed with these adapter kits are

U.L. Listed for use in Class I, Div. 2,

Groups B,C,D hazardous locations and

Zone II, Groups IIB + H2, IIA.

Kit contains one ACCEPTOR®recepta-

cle plus adapter plate and mounting

bolts.

UGRA-20231

UGRA-20232

ADAPTER KIT

CATALOG NUMBER

NEMA RATING

& CONFIGURATION

2 POLE

3 WIRE

2 POLE

3 WIRE

Features

•Factory Sealed

•Test and Reset push buttons are

provided on cover assembly, with

optional pilot light available1

Unit should be tested monthly

•Includes new GFCI to meet latest

UL943 GFCI standards revisions

•Exterior gasket provides NEMA 3

weatherproof protection

•Ground boss for grounding in the

splice box

•Color coded wiring and stainless steel-

cover bolts

•Receptacle used is UGRO-20231.

See page PR23

Listed File No. E97760

XHLF Fluorescent

Class I, Div. 1 & 2, Groups C,D

Class l, Zones 1 & 2, Groups llB,llA

Class lI, Div. 1 & 2, Groups E,F,G

XHLF26 Fluorescent hand lamp

XHLF26-50KP

Fluorescent hand lamp with

- 50' of 16/3 SOW cord and

15A Acceptor plug

5-20R

20 Amp 125 Volt

6-20R

20 Amp 250 Volt

XHL-100

XHL-GL

XHLG

XHLS

Handlamp

Replacement globe

Replacement guard

Replacement socket

CATALOG NUMBER DESCRIPTION

Listed File No. E91049

XHL Incandescent

Class I, Div. 1 & 2, Groups C,D

Class l, Zones 1 & 2, Groups llB,llA

Class I, Div. 1 & 2, Groups C,D

Class l, Zones 1 & 2, Groups llB,llA

Class lI, Div. 1 & 2, Groups F,G

Class III

NEMA 3, 7(C,D) 9(F,G)

Listed File No. E97760

Certified File No. LR10019

CATALOG NUMBER DESCRIPTION

NEMA RATING &

CONFIGURATION

20A, 125V, 2P, 3W

ENCLOSURE

STYLE

Dead End

Feed Thru

A handy accessory to the ACCEPTOR®

Series, these hand lamps can be used

as an illumination source where flam-

mable materials are present, such as

processed finish goods, storage vats,

or handling areas.

See page L14 for detailed

information and features.

UGRA

Certified LR14667

Certified LR11714

See files for details or call Killark.

1For Red LED pilot light indicator of live

circuit, add “-PL” to catalog number.

Example - UGRGF107-PL.

XHL XHLF UGRGF

XHLF FLUORESCENT (120VAC)

GFI PROTECTED RECEPTACLE

Utilizes FXS GFI and ACCEPTOR®

receptacle to interrupt a circuit, when a

ground fault is detected on equipment

which may be handled by personnel in

hazardous locations.

Electrical Rating

GFI units are rated at 20A, 120 VAC,

60Hz. Class A.

4-6 miliamp trip setting

Trip Time-UL Curve

HUB

SIZE

1/2”

3/4”

1”

1/2”

3/4”

1”

CATALOG1

NUMBER

UGRGF107

UGRGF108

UGRGF109

UGRGF110

UGRGF111

UGRGF112

PR26

1/2” HUB UGFI202C3

3/4” HUB UGFI202C3

1” HUB UGFI202C3

1/2” HUB UGFI152C3

3/4” HUB UGFI152C3

1” HUB UGFI152C3

ACCEPTOR®SERIES • PLUGS AND RECEPTACLES

ADAPTER AND ACCESSORIES PR27

FEATURES-SPECIFICATIONS

The GFCI protected ACCEPTOR®is the

solution to OSHA's requirements for

GFCI protection when using portable

equipment in hazardous and wet loca-

tions. For use with 125V, or125/250V3

15 or 20 amp receptacles without GFCI

protection, the Adapter Unit provides

GFCI and circuit protection to connect-

ed apparatus by simply being plugged

into an existing receptacle.

The Hard-Wired Unit provides the

same protection and is used directly

as a GFCI protected device. Units are

feed-through with one close-up plug.

Listed File No. E91049

Certified File No. LR14667

PUSH TO

TEST

Typical Application with

XHL Series Hand Lamp

PUSH TO

TEST

7 3/8

6 1/8

7 7/8

Hard-Wired Unit

• Adapter Unit

Class I, Div. 2, Groups B,C,D

Class I, Zone 2, Groups IIB+H2, IIA

Class II, Div. 1 & 2, Groups F,G

Class III, Div. 1 & 2

• Hard-Wired Unit

Class I, Div. 1 & 2, Groups B,C,D

Class I, Zones 1 & 2, Groups IIB+ H2, IIA

Class II, Div. 1 & 2, Groups F,G

Class III, Div. 1 & 2

NEMA 3 ENCLOSURE TYPE

(Adapter or Hard-Wired units)

Adapter Unit

•No need to permanently alter existing

installations; Portable Unit can be

temporarily hung using included strap

near an existing receptacle wherever

protection is required

•Factory Sealed Unit

•Acceptor®plug and cord set included

with Adapter Unit. Cord is 36"

Hard-Wired Unit

• provides GFCI and circuit protection in

new installations, or as an upgrade or

replacement for non-GFCI receptacles

•Factory Sealed, except Group B

Adapter and Hard-Wired Unit

•GFCI device also provides circuit

protection, for connected apparatus,

against current overload and short

circuits

•Acceptor®receptacles and plugs

are intermateable with both

Crouse-Hinds®Ark-Gard®2 and

Appleton®U-Line®products

•Amber pilot light provides indication

that the receptacle is energized.

•Units can be Padlocked OFF for main-

tained safety

•Fully gasketed GFCI compartment

prevents moisture from damaging

electronic components

•Same high quality materials as the

standard ACCEPTOR®

1Hard-Wired assemblies in Group B areas require

sealing within 6" of enclosure.

2125VAC & 250 VAC devices are C CSA US

certified;125VAC devices are also UL Listed.

32P 250V units are for 2 “hot line” applications

and include 2P 5mA GFI breakers. 2P Units are

for 20/240V or 120/208Y Grounded Power Supply

Systems ONLY. Do NOT use with Delta supply

systems.

Ark-Gard®is a registered trademark of Crouse-Hinds®

U-Line®is a registered trademark of Appleton Electric

Company®.

Adapter Unit

UGFI

GROUND FAULT

PROTECTOR

5-20R

5-15R

6-20R

6-15R

20A

125V

15A

125V

1/2” HUB UGFI20C1

3/4” HUB UGFI20C2

1” HUB UGFI20C3

1/2” HUB UGFI15C1

3/4” HUB UGFI15C2

1” HUB UGFI15C3

5-20R

5-15R

6-20R

6-15R

20A

250V

15A

250V

HARD WIRED (PERMANENTLY MOUNTED)

GFCI RECEPTACLE

kbt>

2P 250V GFI

GFCI RECEPTACLE ADAPTER (W/CORD SET)

20A

125V

15A

125V

20A

250V

15A

250V

UGFI20AD

UGFI15AD

UGFI202AD

UGFI152AD

CUS

PR27

1000464621 Catalog

1000446606-Catalog 1000446606-Catalog 1000446606-Catalog B5 unilog cesco-content

34666-Catalog 34666-Catalog 34666-Catalog 783936 Batch2_1 unilog cesco-content

526762-Catalog 526762-Catalog 526762-Catalog 783936 Batch5 unilog cesco-content

66460-Brochure 66460-Brochure 66460-Brochure 783936 Batch2 unilog cesco-content

112569-Catalog 112569-Catalog 112569-Catalog 783936 Batch7 unilog cesco-content

Navigation menu

Versions of this User Manual:

Views

Navigation