1000505948 Catalog
1000505948-Catalog 1000505948-Catalog 1000505948-Catalog B5 unilog cesco-content
2016-08-17
: Pdf 1000505948-Catalog 1000505948-Catalog B3 unilog
Open the PDF directly: View PDF 
.
Page Count: 58
NEW PRODUCT CATALOGUE
2009
TOOL INDEX
www.MILWAUKEETOOL.COM
CORDLESS TOOLS
M12 LITHIUM-ION CORDLESS SYSTEM
M12 LITHIUM-ION TOOLS 1-2
M12 COMBO KITS 3
M12 FLASHLIGHTS & CHARGERS 3
M12 TEST & MEASUREMENT TOOLS 4-5
ALKALINE TEST & MEASUREMENT TOOLS 6-7
18V LITHIUM-ION CORDLESS SYSTEM
M18 LITHIUM-ION TOOLS 8-10
M18 COMBO KITS 10
M18 FLASHLIGHTS & CHARGERS 11
28V LITHIUM-ION CORDLESS SYSTEM
28V LITHIUM-ION TOOLS 12-13
28V COMBO KITS 13
V28™ JOB SITE RADIO 13
CORDED TOOLS
SAWZALL® RECIPROCATING SAWS 14
CIRCULAR SAWS 15
BAND SAWS 15-16
SMALL ANGLE GRINDERS 16-17
LARGE ANGLE GRINDERS 17
CHOP SAWS 18
MITRE SAWS 18
HOLE HAWG DRILLS 19
ROTARY HAMMERS 19-20
DEMO HAMMERS 20-21
PISTOL DRILLS 21-22
IMPACT WRENCHES 22-23
SCREWDRIVERS 23
SANDERS 24
ROUTERS 24
MAG PRESS 25
DIAMOND CORING RIGS 25
HEAT GUNS 25
GENERATORS 26
ACCESSORIES
SAWZALL® BLADES
SELECTING THE PROPER BLADE 27
TIMBER & GREEN WOOD (PRUNING) BLADES 27
WOOD CUTTING BLADES (NON-DEMO) 27
GENERAL PURPOSE BLADES 28
METAL CUTTING BLADES (NON-DEMO) 28
ICE HARDENEDTM METAL BLADES (NON-DEMO) 28
DEMO & ICE HARDENEDTM DEMO BLADES 29
SPECIALTY BLADES 29-30
SAWZALL® BLADE SETS 30
SAWZALL® BLADE TROUBLESHOOTING GUIDE 30
HACKZALLTM BLADES 31
BANDSAW & COMPACT BANDSAW BLADES 31
ICE HARDENEDTM BI-METAL HOLE SAWS 32
HOLE SAW ARBOURS 32
PILOT DRILL BITS 32
BIG HAWG® HOLE CUTTERS 33
QUIK-LOK® EXTENSIONS 33
SELFEED BITS 33
SWITCHBLADETM SELFEED BITS 34
FLATBORING BITS 34
SPUR AUGER BITS 35
SHIP AUGER BITS 35
SELECTING THE PROPER DRILL BIT 36
THUNDERBOLT® BLACK OXIDE BITS 36-37
THUNDERBOLT® TITANIUM DRILL BITS 37
THUNDERBOLT® COBALT DRILL BITS 38
BRAD POINT & FORSTNER BITS 38
SHOCKWAVETM BITS 39-40
STEP DRILL BITS 41
HAMMER DRILL BITS 42
CARBIDE SDS+ BITS 43-44
MX4 PREMIUM SDS+ BITS 45
STANDARD SDS BITS 46
SDS MAX BITS 46
SPLINE BITS 46-47
CORE BITS (THIN & THICK WALL) 47-48
LHS COMPONENT SYSTEMS 48
DEMOLITION STEEL 49-50
AUTHORIZED SERVICE CENTRES 51-54
www.MILWAUKEETOOL.COM
76>,9,+)@
1
NEW & INNOVATIVE 12V LITHIUM-ION CORDLESS SYSTEM
2401-22
Voltage 12 V
Chuck Size 1/4”
No Load Speed 0-500 RPM
Torque 150 in-lbs.
Chuck Type 1/4” Hex
Battery LITHIUM-ION (2)
Weight 2.0 lbs (w/battery)
Length 7”
M12 Screwdriver - 2401-20 (Bare Tool)
M12 Screwdriver
2451-22
Voltage 12 V
Anvil Size 3/8”
Anvil Type Square
Torque 1000 in-lbs
RPM 0-2200 RPM
IPM 0-3000 IPM
Battery LITHIUM-ION (2)
Weight 2.3 lbs (w/battery)
M12 3/8” Square Drive Impact - 2451-20 (Bare Tool)
M12 3/8” Square Drive
Impact Wrench w/ Ring
2420-22
Voltage 12 V
Speed 0-3000 SPM
Stroke Length ½”
Blade Clamp QUIK-LOK™ Universal ½” Tang
Trigger Variable Speed
Battery LITHIUM-ION (2)
Weight 2.6 lbs (w/battery)
Length 11”
M12 Hackzall™ Recip Saw - 2420-20 (Bare Tool)
M12 Hackzall™ Recip Saw 2471-22
Voltage 12 V
Speed 500 RPM
Trigger Cut / Reset to Open
Blade Copper Cutting Wheel
Capacity ½” to 1-1/8” O.D.
Battery LITHIUM-ION (2)
Weight 3.2 lbs (w/battery)
Length 14”
M12 Copper Tubing Cutter - 2471-21 (1 Battery)
M12 Copper Tubing Cutter - 2471-20 (Bare Tool)
M12 Copper Tubing Cutter
SMALLER.
LIGHTER.
MORE VERSATILE.
M12 LITHIUM-ION cordless tool battery. LITHIUM-ION
batteries deliver longer life and run-time with fade-free
power. Ergonomic, compact, and lightweight design for
operator comfort. For Use with MILWAUKEE® M12 Tools
and Accessories.
All M12 Tools Backed by our Exclusive
5 YEAR WARRANTY.
76>,9,+)@
2410-22
Voltage 12 V
Speed 2 Speed
No Load Speed 0-400/0-1,500 RPM
Torque 250 in-lbs
Chuck Type 3/8”
Single Sleeve/Metal Sleeve Yes
Ratcheting Lock Yes
On-Board Fuel Gauge Yes
LED Light Yes
Battery LITHIUM-ION (2)
Weight 2.5 lbs (w/battery)
Charge Time 30 minutes
M12 3/8” Drill/Driver - 2410-20 (Bare Tool)
M12 3/8” Drill/Driver
2450-22
Voltage 12 V
Anvil Size 1/4”
Anvil Type Hex
IPM 0-3,000
RPM 0-2,000
Torque 850 in-lbs
Battery LITHIUM-ION (2)
Weight 2.3 lbs (w/battery)
M12 ¼” Hex Impact Driver - 2450-20 (Bare Tool)
M12 ¼” Hex Impact Driver
48-11-2401
76>,9,+)@
2
NEW & INNOVATIVE 12V LITHIUM-ION
CORDLESS SYSTEM
www.MILWAUKEETOOL.COM
2310-21
Voltage 12 V
LCD Display 2.4” High-Res Color
Adjustable Image Zoom 2x
LED Brightness (3x) Control
Camera Head Diameter 0.7” (17mm)
Display Resolution 320 x 240
Expandable Flexible Cable 3’
Battery LITHIUM-ION (1)
Waterproof Cable Yes
Auto Shut-Off Feature Yes
Run Time 15 hours
Weight 7.5 lbs (w/battery)
48-53-0110 M-SPECTOR™ 3’ Cable Extension
48-53-0115 M-SPECTOR™ Replacement Camera Cable
M12 M-SpectorTM
Digital Inspection Camera
2320-21
2470-21 2415-21
2590-20
Voltage 12 V
Accuracy 1/4’’ @ 100’
Leveling Range +- 4 Degrees
Laser Power <1mW
Laser Wave Length 635 nm
Battery LITHIUM-ION (1)
Run Time 70 hours
Weight 1.24 lbs (w/battery)
M12 2-Beam Plumb Laser - 2320-20 (Bare Tool)
Fast Cut 2” schedule 40 PVC in 3 secs
Controlled Cut No blade kickback in warm or cold
Clean Cut No burrs or shavings to remove
Close Cut PVC mounted to stud
Extended Run Time Up to 200 times on single charge
90° Head 3.75’’ head length great for small spaces
3/4” Chuck For driling or fastening
Ergonmic Design Easy, 1-Handed Operation
Electronic Clutch For customized torque setting
Balanced Torque & RPM 100 In/Lbs & 800 RPM
Advanced Digital Tuner Best in class radio
reception & sound processing
High Performance Speakers Compact 3’’ speakers deliver
rich, full sound
Sealed Auxiliary Port Protects MP3 players & IPODS
while in use
Jobsite Tough & Portable Shock absorbing case and
roll bars for jobsite durability
M12 Cordless 2-Beam Plumb Laser Kit
M12 PVC Shear M12 Right Angle Drill
M12 Ultraslim Digital Radio
2311-21
2312-21
M-SpectorTM Digital Inspection Camera
M-SpectorTM Analog Inspection Camera
Voltage 12 V
LCD Display 3.5” High-Res Color
Adjustable Image Zoom 4x
LED Brightness (4x) Control
Camera Head Diameter 1.3 MP digital or 9.5 mm analog
Display Resolution 320 x 240
Expandable Flexible Cable 3’
Battery LITHIUM-ION (1)
Waterproof Cable Yes
Digital Photo & Video Capability Yes
Auto Shut-Off Feature Yes
Run Time 15 hours
Weight 7.5 lbs (w/battery)
48-53-0110 M-SPECTOR™ 3’ Cable Extension
48-53-0140 M-SPECTOR™ 8’ Extension
48-53-0125 Replacement AV Digital Camera (17mm cable)
76>,9,+)@
M12 LITHIUM-ION SYSTEM. SMALLER. LIGHTER. MORE VERSATILE.
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
EW!
NEW!
3
www.MILWAUKEETOOL.COM
76>,9,+)@
Voltage 12V
90° Pivoting Head YES
Battery LITHIUM-ION*
Magnetic Back For Hands Free Use
* Battery Sold Separately
Voltage 12V
90° Pivoting Head YES
Battery LITHIUM-ION*
Magnetic Back For Hands Free Use
* Battery Sold Separately
Voltage 12V
Type LITHIUM-ION, 1.4 Amp Hours
Warranty 2 Year
Voltage 12V
Type LITHIUM-ION
2X Run-Time Means more work, less downtime
30% More Power For increased tool performance
10-20% Faster Speed For increased productivity
Warranty 2 Year
Power DC & USB Ports
Charge Status LED YES
Electronic Overload Protection YES
Battery sold separately
49-24-0145 M12 Xenon Incandescent Work Light 49-24-0146 M12 LED Work Light
48-11-2401 M12 LITHIUM-ION Battery
48-11-2402 M12 XC LITHIUM-ION Battery
2349-20 M12 Power Port
Charge Time 30 Mins
Warranty 5 Year
Charge Time 30 Min to 1 Hr Fast Charging
Both AC/Vehicle Charger Added utility & less downtime
Warranty 5 Year
48-59-2401 M12 LITHIUM-ION Battery Charger
2510-20 M12 LITHIUM-ION AC/Vehicle Charger
FLASHLIGHTS & CHARGERS
2491-24
Voltage 12 V
Screwdriver (2401-20)
1/4” Hex Impact Driver (2450-20)
Hackzall™ Recip Saw (2420-20)
Work Light (49-24-0145)
Battery LITHIUM-ION (2)
Charge Time 30 minutes
M12 4-Tool Combo Kit
2490-24
Voltage 12 V
Screwdriver (2401-20)
Hackzall™ Recip Saw (2420-20)
Copper Tubing Cutter (2471-20)
Work Light (49-24-0145)
Battery LITHIUM-ION (2)
Charge Time 30 minutes
M12 4-Tool Combo Kit
2490-22
Voltage 12 V
Screwdriver (2401-20)
Hackzall™ Recip Saw (2420-20)
Battery LITHIUM-ION (2)
Charge Time 30 minutes
M12 2-Tool Combo Kit
COMBO KITS
2491-22
Voltage 12 V
1/4” Hex Impact Driver (2450-20)
Hackzall™ Recip Saw (2420-20)
Battery LITHIUM-ION (2)
Charge Time 30 minutes
M12 2-Tool Combo Kit
76>,9,+)@
4
NEW & INNOVATIVE 12V LITHIUM-ION
CORDLESS SYSTEM
2238-21
2239-21
Jaw Size 1.3”
TRMS YES
Safety Rating CAT IV 600V/ CAT III 1000V
Current AC 600A
Microamps DC 600μA
Voltage AC/DC 1000 V
Resistance 600 kOhms
Capacitance 4000μF
Contact Temperature -40° F to 752° F (-40° C to 400° C)
Display Backlight/Type YES/White on Black
Locking Trigger YES
Non-contact Voltage YES
HOLD / MIN / MAX YES
Non-Contact Voltage YES
M12 CLAMP GUNTM Meter for HVAC/R - 2238-20 (Bare Tool)
M12 AC CLAMP / HVAC COMBO with 2401-22 Drill/Driver 2238-23
Jaw Size 1.3”
TRMS YES
Safety Rating CAT IV 600V/ CAT III 1000V
Current AC/DC 1000A
Inrush Current YES, 100mS
Voltage AC/DC 1000 V
Resistance 600 kOhms
Capacitance 4000μF
Display Backlight/Type YES/White on Black
Locking Trigger YES
HOLD / MIN / MAX YES
Non-Contact Voltage YES
M12 Electrician CLAMP GUNTM Meter - 2239-20 (Bare Tool)
M12 AC/DC CLAMP COMBO with 2401-22 Drill/Driver 2239-23
M12 CLAMP-GUN™ Meter for HVAC/R
M12 Electrician CLAMP-GUN™ Meter
www.MILWAUKEETOOL.COM
Built-in non-contact voltage detector
Built-in non-contact voltage detector
Large jaw opening
easily handles
wire bundles
Large jaw opening
easily handles
wire bundles
Built-in LED
flood light
Built-in LED
flood light
Simplified user interface
& feature set specifically
tailored for the HVAC
technician
Simplified user interface
& feature set specifically
tailored for the Electrician
M12 Lithium-Ion battery pack
provides power for unmatched
performance
M12 Lithium-Ion battery pack
provides power for unmatched
performance
NEW MILWAUKEE M12 TEST & MEASUREMENT TOOLS
DESIGNED TO A HIGHER STANDARD.
76>,9,+)@
All M12 Tools Backed by our Exclusive
5 YEAR WARRANTY.
76>,9,+)@
5
Four wheel design for
durability and smooth,
accurate measurement
www.MILWAUKEETOOL.COM
2277-21
Temperature Range -30˚ C to 800˚ C (-22˚ F to 1472˚ F)
Basic Accuracy 1.50%
Distance to Spot 40 to 1
Contact Temperature -40° F to 550° F (-40° C to 1022° C)
Data Storage YES, 20 Points
Response time <500 mS
Emissivity Adjustable 0.10 to1.00
MIN / MAX / AVG / DIF YES
Data Storage YES, 20 Points
Alarm (HI / LO) YES
Display Backlight/Type YES / White on Black
Humidity Measurement YES
Dew Point Measurement YES
M12 LASER TEMP GUNTM - 2277-20 (Bare Tool)
M12 IR THERMOMETER COMBO KIT with 2401-22 Drill/Driver 2276-23
M12 LASER TEMP GUN™ for HVAC/R with LED Light
40:1 cone
measurement
ratio provides
high accuracy
measurements
Simplified user interface
and feature set specifically
tailored for the HVAC technician
Built-in LED
flood light
M12 Lithium-Ion battery
pack provides power for
unmatched performance
40:1 cone
measurement
ratio provides
high accuracy
measurements
Simplified user interface
and feature set specifically
tailored for the Electrician
Built-in LED
flood light
M12 Lithium-Ion battery
pack provides power for
unmatched performance
2276-21
Temperature Range -30˚ C to 800˚ C (-22˚ F to 1472˚ F)
Basic Accuracy 1.50%
Distance to Spot 40 to 1
Contact Temperature -40° F to 550° F (-40° C to 1022° C)
Response time <500 mS
Emissivity Adjustable 0.10 to1.00
Locking Trigger YES
MIN / MAX / AVG / DIF YES
Data Storage YES, 20 Points
Alarm (HI / LO) YES
Display Backlight/Type YES / White on Black
M12 LASER TEMP GUNTM - 2276-20 (Bare Tool)
M12 Electrician LASER TEMP GUN™ with LED Light
NEW & INNOVATIVE 12V LITHIUM-ION
CORDLESS SYSTEM
2290-21
Drywall Thickness 1-1/2”
Ceramic Tile Thickness 1/2”
Marble Thickness 1/2”
Concrete Thickness 6”
Wood, Metal Stud Depth 1-1/2”
PVC/PEX Depth 1”
Auto Calibration Yes
Display Backlight/Type YES/White on Black
Stud Center 1/4”
Steel Center 1/2”
Copper/Aluminum Center 1/2”
M12 WALL SCANNER TOOL - 2290-20 (Bare Tool)
M12 WALL SCANNER COMBO with 2401-22 Drill/Driver 2290-23
M12 SUB SCANNER™
Detects metal and wood
by scanning into concrete,
drywall, wood and metal
Built-in non-contact
voltage detector
High contrast, easy to read
display for clearer readings
76>,9,+)@
76>,9,+)@
6
NEW!
ALKALINE TEST & MEASUREMENT TOOLS
www.MILWAUKEETOOL.COM
2236-20
2237-20
Jaw Size 1.3”
TRMS YES
Safety Rating CAT III 600V
Current AC 600A
Microamps DC 600μA
Voltage AC/DC 600V
Resistance 6 kohms
Capacitance 4000μF
Contact Temperature -40° F to 752° F (-40° C to 400° C)
Display Backlight/Type YES/White on Black
Non-Contact Voltage YES
Jaw Size 1.3”
TRMS YES
Safety Rating CAT III 600V
AC/DC Amps 600
AC/DC Volts 600
Ohms 6 kohms
Resistance 6 kohms
Capacitance 4000μF
Display Backlight/Type YES/White on Black
Non-Contact Voltage YES
Alkaline Clamp Meter for HVAC/R with LED Light
Alkaline Clamp Meter with LED Light - Electrician
2217-20
TRMS YES
Safety Rating CAT III 600V
DC Voltage 600mV – 600V
Lo-Z Measurement YES
Frequency 10 Hz - 50.00kHz
Contact Temperature -40° F to 752° F (-40° C to 400° C)
Display Backlight/Type YES / White on Black
Proprietary Rail Accessory attachment
Features Voltage Detector and Magnet
HOLD / Min / Max YES
Alkaline Digital Multimeter
Thin jaw profile for
access to tight spaces
Thin jaw profile for
access to tight spaces
LED Light
LED Light
High contrast, easy
to read display
Large jaw opening
easily handles
wire bundles
Large jaw opening
easily handles
wire bundles
AA Batteries
Included
AA Batteries
Included
AA Batteries
Included
Simplified user interface
and feature set specifically
tailored to the HVAC/R
technician
Simplified user interface
and feature set specifically
tailored to the Electrician
Simplified user interface
and feature set specifically
tailored to the Electrician
or HVAC technician
Slide rail for mounting
voltage detector or
magnet accessories
Side mounted dial
for one-handed use
Test and lead inputs
Test and lead inputs
76>,9,+)@
7
www.MILWAUKEETOOL.COM
2206-20
2205-20
2266-20
Current AC 200A
Fork Opening 0.63”
TRMS YES
Safety Rating CAT IV 600V/CAT III 1000V
Microamps DC 600μA
Voltage AC/DC 1000V
Capacitance YES
Contact Temperature -40° F to 752° F (-40° C to 400° C)
Display Backlight/Type YES / White on Black
Non-contact Voltage YES
Current AC 200A
Fork Opening 0.63”
TRMS YES
Safety Rating CAT IV 600V/CAT III 1000V
AC/DC Volts 1000 (auto volts)
Voltage AC/DC 1000V
Capacitance YES
Ohms 600.0 Ohm - 40.00 MOhm
Display Backlight/Type YES / White on Black
Non-contact Voltage YES
Temperature Range -30˚ C to 500˚ C (-22˚ F to 932˚ F)
Distance to Spot Ratio 12 to 1
Basic Accuracy 1.50%
Contact Temp Input -40˚ C to 537˚ C (-40˚ F to 998˚ F)
Repeatability 0.50%
Response time <500 mS
Emissivity 0.95
HOLD / MAX YES
Display Backlight/Type YES / White on Black
Alarm (HI / LO) YES
Alkaline Fork Meter for HVAC/R
Alkaline Fork Meter - Electrician
Alkaline LASER TEMP-GUNTM
Built-in LED work light
lights the work area
High contrast, easy
to read display
Built-in non-contact
voltage detector
AA Batteries
Included
Simplified user interface
and feature set specifically
tailored to the HVAC
technician
Built-in LED work light
lights the work area
On-board accessory
mount for voltage
detector and magnet
Thermocouple input
for contact temperature
measurement
12 :1 cone ratio for more
accurate measurements
High contrast, easy
to read display
Built-in non-contact
voltage detector
AA Batteries
Included
Simplified user interface
and feature set specifically
tailored to the Electrician
AA Batteries
Included
2201-20 Alkaline Voltage Detector with Work Light
Voltage Range - 90 to 600VAC, Visual Indicator,
Mountable on other tools, AAA battery included.
NEW!
ALKALINE TEST & MEASUREMENT TOOLS
76>,9,+)@
2610-24
2650-22
2601-22
2651-22
Voltage 18V
Torque 650 in-lbs.
RPM High 0-1,800
RPM Low 0-450
Clutch Settings 24
Battery XC High Capacity LITHIUM-ION (2)
Length 9-1/4”
Weight 5.3 lbs (w/battery)
M18 High Performance Drill Driver - 2610-20 (Bare Tool)
Voltage 18 V
Torque 400 in-lbs.
Chuck Size / Type 1/2”, Keyless
Clutch Settings 21
No Load Speed 0-350/0-1,400 RPM
Battery LITHIUM-ION (2)
Capacity in Steel / Wood 1/2” / 1”
Weight 4.0 lbs (w/battery)
M18 Compact Driver Drill - 2601-20 (Bare Tool)
Voltage 18V
Anvil Size 3/8”
Anvil Type Ring
Torque 2000 in-lbs
RPM 0-2200 RPM
IPM 0-3200 IPM
Battery XC High Capacity LITHIUM-ION (2)
Weight 4.1 lbs (w/battery)
M18 3/8” Compact Impact Wrench w/Ring - 2651-20 (Bare Tool)
www.MILWAUKEETOOL.COM
M18 ¼” Hex Compact Impact Driver
M18 Compact Driver DrillM18 High Performance Drill/Driver
M18 3/8” Compact
Impact Wrench w/Ring
POWER.
PERFORMANCE.
INNOVATION.
The M18 XC High Capacity LITHIUM-ION
Battery pack offers superior run-time with
40% less weight than NiCad. MILWAUKEE®’s
Digital Power Management helps to ensure
optimal battery life and run-time is achieved
during the toughest jobsite applications.
NEW & INNOVATIVE 18V LITHIUM-ION CORDLESS SYSTEM
2602-22
Voltage 18 V
Torque 550 in-lbs of peak torque
Chuck Type 1/2” Single Sleeve
RPM 0-450/0-1,700
BPM 0-29,000
Battery XC High Capacity LITHIUM-ION (2)
Length 8-1/2”
Weight 4.9 lbs (w/battery)
M18 Cordless 1/2” Hammer-Drill / Driver - 2602-20 (Bare Tool)
M18 Cordless 1/2” Hammer-Drill / Driver Kit - 2602-22CT
450 in.lbs. Peak Torque, (2) Compact LI-ION Batteries
M18 Cordless 1/2”
Hammer-Drill/Driver Kit
2611-24
Voltage 18 V
Torque 650 in-lbs
RPM High 0-1,800
RPM Low 0-450
BPM 0-28,000
Battery XC High Capacity LITHIUM-ION (2)
Length 9-1/4”
Weight 5.3 lbs (w/battery)
M18 Cordless 1/2” Hammer-Drill/Driver - 2611-20 (Bare Tool)
M18 Cordless 1/2”
Hammer-Drill/Driver Kit
48-11-1828
Voltage 18V
Anvil Size ¼”
Anvil Type Hex
Torque 1,400 in lbs
RPM 0-2,200
IPM 0-3,200
Battery XC High Capacity LITHIUM-ION (2)
Weight 3.5 lbs (w/battery)
M18 ¼” Hex Compact Impact Driver- 2650-21, (2) Compact LI-ION Batteries
M18 ¼” Hex Compact Impact Driver- 2650-20 (Bare Tool)
76>,9,+)@
M
18
LITHIUM-ION
8
76>,9,+)@
NEW & INNOVATIVE 18V LITHIUM-ION
CORDLESS SYSTEM
2645-22
Voltage 18 V
SPM 2,200
Stroke Length 1”
Bevel Capacity 45°
Orbital Setting 5
Tool Free Blade Change/Bevel Yes
Battery XC High Capacity LITHIUM-ION (2)
Weight 7.75 lbs (w/battery)
M18 Jig Saw - 2645-20 (Bare Tool)
M18 Jig Saw
www.MILWAUKEETOOL.COM
2662-22
Voltage 18 V
Anvil Size 1/2” Square
Anvil Type Pin Detent
Torque 450 ft-lbs
RPM 0-1,900
IPM 0-2,200
Battery XC High Capacity LITHIUM-ION (2)
Weight 6.7 lbs (w/battery)
M18 Cordless 1/2” High Torque Impact Wrench w/Pin Detent - 2662-20 (Bare Tool)
M18 Cordless 1/2” High Torque
Impact Wrench w/Pin Detent Kit
2664-22
Voltage 18 V
Anvil Size 3/4” Square
Anvil Type Friction Ring
Torque 525 ft-lbs
RPM 0-1,900
IPM 0-2,200
Battery XC High Capacity LITHIUM-ION (2)
Weight 6.8 lbs (w/battery)
M18 Cordless 1/2” High Torque Impact Wrench w/Friction Ring - 2664-20 (Bare Tool)
M18 Cordless 3/4” High Torque
Impact Wrench w/Friction Ring Kit
2663-22
Voltage 18 V
Anvil Size 1/2” Square
Anvil Type Friction Ring
Torque 450 ft-lbs
RPM 0-1,900
IPM 0-2,200
Battery XC High Capacity LITHIUM-ION (2)
Weight 6.7 lbs (w/battery)
M18 Cordless 1/2” High Torque Impact Wrench w/Friction Ring - 2663-20 (Bare Tool)
M18 Cordless 1/2” High Torque
Impact Wrench w/Friction Ring Kit
2665-22
Voltage 18 V
Anvil Size 7/16” Hex
Anvil Type 7/16” Hex Chuck
Torque 350 ft-lbs
RPM 0-1,900
IPM 0-2,200
Battery XC High Capacity LITHIUM-ION (2)
Weight 7 lbs (w/battery)
M18 Cordless 7/16” Hex High Torque Impact Wrench - 2665-20 (Bare Tool)
M18 Cordless 7/16” Hex
High Torque Impact Wrench Kit 2680-22
Voltage 18 V
RPM 9,000
Tool Free Guard Yes
Position Handle 3
Type 1 Guard Yes
Type 27 Guard Yes
Battery XC High Capacity LITHIUM-ION (2)
Weight 5.9 lbs
M18 4-1/2” Cut-off/Grinder - 2680-20 (Bare Tool)
M18 4-1/2” Cut-off / Grinder
2620-22
Voltage 18 V
Stroke Length 1”
SPM 0-3,200
Battery XC High Capacity LITHIUM-ION (2)
Length 17 ¾”
Variable Speed Trigger Yes
Blade Clamp Lever Action QUIK-LOK™
Weight 7.9 lbs (w/battery)
M18 Sawzall® Recip Saw Tool Kit - 2620-21 (1 Battery)
M18 Sawzall® Recip Saw - 2620-20 (Bare Tool)
M18 Sawzall®
Recip Saw Tool Kit
2652-22
Voltage 18 V
Anvil Size 1/2”
Anvil Type Detent
Torque 2200 in-lbs
RPM 0-2200 RPM
IPM 0-3200 IPM
Battery XC High Capacity LITHIUM-ION (2)
Weight 4.1 lbs (w/battery)
M18 1/2” Compact Impact Wrench w/Ring - 2652-20 (Bare Tool)
M18 1/2” Compact
Impact Wrench w/Ring
76>,9,+)@
M
18
LITHIUM-ION
9
76>,9,+)@
10
NEW & INNOVATIVE 18V LITHIUM-ION
CORDLESS SYSTEM
2630-22 2629-22 0880-20
Voltage 18 V
RPM 3,500
Capacity 2-1/8” @ 90°, 1-5/8” @ 45°
Arbour 5/8”
Blade 6 ½” 24T Carbide Tipped
Battery XC High Capacity LITHIUM-ION (2)
Blade Guard/Shoe Magnesium/Aircraft Aluminum
Weight 8.5 lbs (w/battery)
M18 6 ½” Circular Saw - 2630-20 (Bare Tool)
Voltage 18 V
Material Wet/Dry
Capacity 2 Gal.
Max Air Flow 45 cu. ft./min.
Sealed Suction 32” in Water
Height 11.5”
Width 19”
Weight 9.4 lbs (w/battery)
*Works on all Milwaukee 18V slide-on batteries,
LITHIUM-ION or NiCd.
Battery Pack & Charger Sold Separately.
M18 Wet/Dry
Vacuum*
www.MILWAUKEETOOL.COM
M18 6 ½” Circular Saw
M18 Compact
Band Saw
M18 4-Tool Combo
Kit w/Contractor Bag
M18 4-Tool Combo
Kit w/Contractor Bag
M18 4-Tool Combo
Kit w/Contractor Bag
M18 4-Tool Combo
Kit w/Contractor Bag
M18 2-Tool Combo Kit
COMBO KITS
2690-24
2692-24
2691-24
2694-24
2691-22 2690-22
Voltage 18 V
Hammer Drill (2611-20)
Sawzall® Recip Saw (2620-20)
Circular Saw (2630-20)
Work Light (49-24-0171)
Battery XC High Capacity LITHIUM-ION (2)
Charge Time 1 Hour
Voltage 18 V
Hammer Drill (2611-20)
1/4” Hex Impact Driver (2650-20)
SawzallTM (2692-24)
Work Light (49-24-0171)
Battery XC High Capacity LITHIUM-ION (2)
Charge Time 1 Hour
Voltage 18 V
Compact Driver (2601-20)
Sawzall® Recip Saw (2620-20)
Circular Saw (2630-20)
Work Light (49-24-0171)
Battery XC High Capacity LITHIUM-ION (2)
Charge Time 1 Hour
Voltage 18 V
Compact Hammer Drill (2602-20)
Sawzall® Recip Saw (2620-20)
Circular Saw (2630-20)
Work Light (49-24-0171)
Battery XC High Capacity LITHIUM-ION (2)
Charge Time 1 Hour
Voltage 18 V
Compact Driver (2601-20)
1/4” Hex Impact Driver (2650-20)
Battery Compact LITHIUM-ION (2)
Charge Time 30 Minutes
Voltage 18 V
Hammer Drill (2611-20)
Sawzall® Recip Saw (2620-20)
Battery XC High Capacity LITHIUM-ION (2)
Charge Time 30 Minutes
76>,9,+)@
M
18
LITHIUM-ION
M18 2-Tool Combo
Kit w/Contractor Bag
Voltage 18V
No Load Speed 480
Loaded Speed 390
Max Capacity (Rectangular) 3-1/4” x 3-1/4”
Max Capacity (Round) 3-1/4”
Blade Length 35-3/8”
Battery XC High Capacity
LITHIUM-ION (2)
76>,9,+)@
NEW & INNOVATIVE 18V LITHIUM-ION
CORDLESS SYSTEM
49-24-0171 2790-20
48-11-1815
48-59-1801 2701-20
Digital Power Management YES
Overload Protection YES
Temperature Management System YES
Individual Cell Voltage Monitoring YES
Discharge Protection YES
Battery Gauge YES
Warranty 2 Year
Voltage 18V
Battery 18 V Compact or XC
Integrated Hook For Hands-Free Use
*Battery Pack & Charger Sold Separately
Tuner/Modes Digital/AM/FM
MP3 Compatible/Storage YES
Watts/Equalizer 40 Watts/YES
Battery Compatibility M12™, M18™, V18™, V28™,
NiCD 12V - 18V Batteries
Charge Time 1 Hour
Pass-Through Plug Design For added outlet availability
Warranty 5 Year
Charge Time 30 Min to 1 Hr Fast Charging
Both AC/Vehicle Charger Added utility & less downtime
Warranty 5 Year
M18 Xenon Incandescent
Work Light
M18 Weather Resistant
Jobsite Radio
M18 Compact
LITHIUM-ION Battery
M18 LITHIUM-ION
Battery Charger
M18 LITHIUM-ION
AC and Vehicle Charger
www.MILWAUKEETOOL.COM
48-11-1828
Digital Power Management YES
Overload Protection YES
Temperature Management System YES
Individual Cell Voltage Monitoring YES
Discharge Protection YES
Battery Gauge YES
Warranty 5 Year/2,000 Charge
M18 XC High Capacity
LITHIUM-ION Battery
Equivalent run-time with 40% less
weight than an 18V NiCad battery
INCREASED RUN-TIME with 40% less
weight than an 18V NiCd battery
Battery Fuel Gauge
Displays remaining run-time
Patented DPM Electronics
Provides maximum life
Slide Pack Design
Easy to use design that securely holds
the battery to the tool
Integrated Weld Frame
Provides strong compact structure to securely
hold cells for maximum life
Cell Separator
Prevents cell damage from vibration or drops
Lithum-Ion Battery Cells
Delivers up to 2X more run-time
Impact and Vibration Protective Rubber
Protects cells and pack during drops & provides maximum life
MORE TORQUE. MORE POWER. LONGER RUN-TIME.
All M18 Tools Backed by our Exclusive
5 YEAR, 2000 CHARGE WARRANTY.
EXCLUSIVE
DIGITAL POWER
MANAGEMENT
DPM
76>,9,+)@
M
18
LITHIUM-ION
11
76>,9,+)@
POWERFUL 28V LITHIUM-ION CORDLESS SYSTEM
0721-21 0756-22
Voltage 28 DC
No Load Speed 0-400/0-1,000 RPM
Torque 1,081 in-lbs
Chuck Type Keyed
Battery LITHIUM-ION
Capacity in Steel 1/2”
Capacity in Wood 2-9/16”
Weight 10.9 lbs (w/battery)
V28™ Right Angle Drill - 0721-20 (Bare Tool)
Voltage 28 DC
No Load BPM 0-4,700
No Load Speed 0-1,400 RPM
Solid Bit Capacity 1”
Thin Wall Core Bit Capacity 2-1/2”
Battery LITHIUM-ION (2)
Weight 9.6 lbs (w/battery)
V28™ Compact 1” SDS Rotary Hammer - 0756-20 (Bare Tool)
www.MILWAUKEETOOL.COM
V28™ 1/2” Right
Angle Drill Kit
V28™ Compact 1” SDS
Rotary Hammer Kit
DURABILITY.
LONGEVITY.
PERSISTANCE.
LITHIUM-ION technology allows consistent
fade-free power - meaning the first cut is
as powerful as the last. V28® LITHIUM-ION
battery packs can be charged at any time so
they are ready to work as hard as you are.
0730-22 0740-22
Voltage 28 DC
Blade Size 6-1/2”
Battery LITHIUM-ION (2)
Length 15-7/8”
Weight 9.4 lbs (w/battery)
V28™ 6-1/2” Circular Saw - 0730-20 (Bare Tool)
Voltage 28 DC
Blade Size 6-7/8”
Tool Weight 9.4 lbs
Battery LITHIUM-ION (2)
Length 15-7/8”
Weight 9.4 lbs (w/battery)
V28™ Metal Cutting Saw - 0740-20 (Bare Tool)
V28™ 6-1/2” Circular Saw Kit V28™ Metal Cutting Saw Kit
0724-24
Voltage 28 DC
Torque 600 in-lbs
BPM 4,700
Operating Modes 3
Battery LITHIUM-ION (2)
Length 10-1/2”
Weight 6.7 lbs (w/battery)
V28™ 1/2” Hammer Drill - 0724-20 (Bare Tool)
V28™ 1/2” Hammer-Drill Kit 0719-22
Voltage 28 DC
Stroke Length 1-1/8”
SPM 0-2000 / 0-3000
Keyless Shoe YES
Quick-Lok® Blade Clamp YES
Battery LITHIUM-ION (2)
Weight 9.4 lbs (w/battery)
V28™ Sawzall® Reciprocating Saw - 0719-20 (Bare Tool)
V28™ Sawzall®
Reciprocating Saw Kit
All V28 Tools Backed by our Exclusive
5 YEAR, 2000
CHARGE WARRANTY.
76>,9,+)@
48-11-2830
12
76>,9,+)@
POWERFUL V28 LITHIUM-ION
CORDLESS SYSTEM
0799-20
0779-22
0928-29
49-24-0280
0725-21 0729-21
0928-23
48-11-2830
Voltage 28 DC
Torque 3,900 in-lbs/325 ft-lbs
Drive Size 7/16” Hex
No Load Speed 0-1,450 RPM / 0-2,450 BPM
Battery LITHIUM-ION*
Amp Hours 3
Weight 7.6 lbs
*Battery Sold Separately
Voltage 28 DC
Torque 3,900 in-lbs/325 ft-lbs
No Load Speed 0-1,450 RPM / 0-2,450 BPM
Drive Size 1/2” Square
Reversible Battery Yes
Amp Hours 3
Battery LITHIUM-ION (2)
Weight 8.9 lbs (w/battery)
V28™ 1/2” Impact Wrench - Bare Tool 0779-20
Voltage 28 DC
1/2” Hammer-Drill 0724-24
Sawzall® Recip Saw 0719-22
6-1/2” Circular Saw 0730-22
Work Light 49-24-0185
Battery LITHIUM-ION (2)
Sound Rockford Fosgate®
System w/Punch EQ
Rugged Construction Withstands 8 ft. drop to concrete
Speakers 5-1/4” 25W weather resistant
w/separate tweeters
AC Pass through plug provides
extra AC outlet
Voltage 28 DC
No Load Speed 8,000 RPM
Spindle 5/8”-11
Switch Type Slide-on
Spindle Lock Yes
Length 14”
Weight 6.8 lbs (w/battery)
V28™Grinder/Cut-off Tool - 0725-20 (Bare Tool)
Voltage 28 DC
No Load Speed 0-225/0-350 FPM
Capacity in Rectangular Stock 4-3/4” x. 4-3/4”
Battery LITHIUM-ION
LED Light YES
Weight 19.6 lbs (w/battery)
V28™ Band Saw - 0729-20 (Bare Tool)
Voltage 28 DC
Hammer Drill 0724-24
Sawzall® Recip Saw 0719-22
Work Light 49-24-0185
Battery LITHIUM-ION (2)
Built-In Fuel Gauge YES
Circuit Born-on-date and
performance optimizing
Warranty 5-Year/2,000 Charge
Eco-Friendly YES
Run-Time 5 Hours
V28™ Impact Wrench
7/16 Hex Quick Change
V28™ 1/2” Impact Wrench Kit
V28™ Job Site Radio
V28™ Grinder/Cut-off Tool V28™ Band Saw Kit
V28™ 4-Tool Combo
Kit w/Contractor Bag
V28™ 3-Tool Combo
Kit w/Contractor Bag
V28® LITHIUM-ION Battery Pack
www.MILWAUKEETOOL.COM
COMBO KITS
76>,9,+)@
13
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
6538-21
6520-21
Amps 15
Stroke Length 1-1/4”
No Load Speed 0-2,800 SPM
Cord Length 8’
Amps 12
Stroke Length 1-1/8”
No Load Speed 0-2,800 SPM
Cord Length 8’
15 Amp Super SAWZALL®
Reciprocating Saw
12 Amp Orbital SAWZALL®
Reciprocating Saw
INCLUDES (1) Super Sawzall® Blade & Carrying Case
INCLUDES (1) Super Sawzall® Blade & Carrying Case
W
ZALL
®
w
W
ZA
LL
®
a
w
In 1951, MILWAUKEE® produced an unparalleled new
tool – the Sawzall® Reciprocating Saw – The first
portable hacksaw with a reciprocating mechanism that
featured only three moving parts. Since then, MILWAUKEE®
has led the way in reciprocating saw technology producing
the most powerful and durable saws in the industry.
SAWZALL® RECIPROCATING SAWS
6509-22
Amps 11
Stroke Length 3/4”
No Load Speed 0-2,800 SPM
Cord Length 8’
11 Amp SAWZALL®
Reciprocating Saw
INCLUDES (1) Super Sawzall® Blade & Carrying Case
6509-20: 11 Amp Sawzall® (Case Not Included)
6519-22
Amps 11
Stroke Length 1-1/8”
No Load Speed 0-2,800 SPM
Cord Length 8’
11 Amp SAWZALL® PLUS
Reciprocating Saw
INCLUDES (1) Super Sawzall® Blade & Carrying Case
®
PLUS
6536-21
Amps 13
Stroke Length 1-1/4”
No Load Speed 0-3,000 SPM
Cord Length 8’
13 Amp Orbital
Super SAWZALL®
INCLUDES (1) Super Sawzall® Blade, & Carrying Case
6523-21
360˚ Rotating Handle
Orbital Super SAWZALL®
INCLUDES (1) Super Sawzall® Blade, & Carrying Case
Amps 13
Stroke Length 1-1/4”
No Load Speed 0-3,000 SPM
Cord Length 10’ QUIK-LOK™
Handle Rotates 360° for ease of use in
tight areas
14
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
CIRCULAR SAWS
6470-21
10-1/4” Circular Saw
w/ Case
INCLUDES (1) Blade & Carrying Case
Amps 15
Blade Size 10-1/4”
No Load RPM 5,200
Metal/Wood Cutting Wood
Electric Brake YES
6391-21
7-1/4” Left Blade
Circular Saw w/ Case
INCLUDES (1) Blade & Carrying Case
Amps 15
Blade Size 7-1/4”
No Load RPM 5,800
Metal/Wood Cutting Wood
Electric Brake NO
TILT-LOK™ Handle YES
6394-21
7-1/4” Left Blade Circular
Saw w/ QUIK-LOK™ Cord
INCLUDES (1) Blade & Case
Amps 15
Blade Size 10-1/4”
No Load RPM 5,800
Metal/Wood Cutting Wood
Electric Brake YES
TILT-LOK™ Handle YES
6390-21
7-1/4” Circular Saw
w/ Case
INCLUDES (1) Blade & Case
6390-20: 7-1/4” Circular Saw (Case Not Included)
Amps 15
Blade Size 7-1/4”
No Load RPM 5,800
Metal/Wood Cutting Wood
Electric Brake NO
TILT-LOK™ Handle YES
6477-20
7-1/4” Worm Drive
Circular Saw
INCLUDES (1) Blade
6577-20: 7-1/4” Worm Drive Circular Saw w/ Twist Plug
Amps 15
Blade Size 7-1/4”
No Load RPM 4,400
Metal/Wood Cutting Wood
Electric Brake NO
Spindle Lock YES
6370-21
8” Metal Cutting Saw
w/ Case
INCLUDES (1) Blade & Carrying Case
6370-20: Metal Cutting Saw (Case Not Included)
Amps 13
Blade Size 8”
No Load RPM 3,700
Metal/Wood Cutting Metal
Electric Brake NO
Spindle Lock YES
o
t Included)
S
aw
0
al
BAND SAWS
6232-6N
Amps 10.5 / 5.5
SFPM 0-420
Max Capacity 4-7/8” x 4-7/8”
Switch Type Trigger & Dial
Deep Cut Band Saw
INCLUDES Carrying Case
6230N: Deep Cut Band Saw (Case Not Included)
6238N
INCLUDES Carrying Case
6236N: Deep Cut Band Saw AC/DC (Case Not Included)
Deep Cut Band Saw
AC/DC
Amps 10.5 / 5.5
SFPM 420 / 320
Max Capacity 4-7/8” x 4-7/8”
Switch Type Trigger & Dial
15
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
BAND SAWS Con’t
6242-6 6226
INCLUDES Blade & Carrying Case INCLUDES (1) 14 Tooth Bi-Metal Blade & Carrying Case
6225: Portable Band Saw (Case Not Included)
Compact Band Saw Portable Band Saw
Amps 7 Amps
SFPM 200 - 360 Variable Speed Dial
Max Capacity 3-1/4” x 3-1/4”
Switch Type Trigger & Dial
Other Only 9.5 lbs / 16” long
Amps 6 / 5
SFPM 200 / 250
Max Capacity 3-1/2” x 4”
Switch Type Trigger
48-08-0260 Portable Band Table
t Converts MILWAUKEE’s portable
band saws to stationary units
t Can be mounted on work bench or
used with 3/4” diameter pipe for legs
SMALL ANGLE GRINDERS
6130-33
Wheel Diameter 4-1/2”
Amps 7
RPM’s 10,000
Switch Type Slide
Guard Type 27, Tool Free Adjustment
7 Amp Compact Grinder
INCLUDES Spanner Wrench & 2-Position Side Handle
6140-33
Wheel Diameter 4-1/2”
Amps 7
RPM’s 10,000
Switch Type Slide
Guard Type 27, Tool Free Adjustment
INCLUDES Spanner Wrench & 2-Position Side Handle
7 Amp
Angle Grinder
COMING
SOON
6140-30
Wheel Diameter 4-1/2”
Amps 7.5
RPM’s 10,000
Switch Type Paddle with Lock On
Guard Type 27, Tool Free Adjustment
7.5 Amp
Angle Grinder
INCLUDES Spanner Wrench & 2-Position Side Handle
6148-30
Wheel Diameter 4-1/2”
Amps 10
RPM’s 10,000
Switch Type Paddle with Lock On
Guard Type 27, Tool Free Adjustment
INCLUDES Spanner Wrench & 3-Position Side Handle
6148-31: 10 Amp Angle Grinder (paddle no lock)
6148-33: 10 Amp Angle Grinder w/ Slide Switch
10 Amp
Angle Grinder
ed
D
ia
l
16
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
SMALL ANGLE GRINDERS Con’t
6122-30
Wheel Diameter 4-1/2”
Amps 10
RPM’s 10,000
Switch Type Trigger with Lock On
Guard Type 27, Tool Free Adjustment
10 Amp Trigger Grip
Angle Grinder
INCLUDES Spanner Wrench & 3-Position Side Handle
6122-31: 10 Amp Trigger Grip Angle Grinder (No Lock Switch)
6116-30
Wheel Diameter 4-1/2”/5”
Amps 12
RPM’s 9,000
Switch Type Paddle with Lock On
Guard Type 27, Tool Free Adjustment
12 Amp
Angle Grinder
INCLUDES Spanner Wrench & 3-Position Side Handle
6116-31: 12 Amp Angle Grinder (Paddle No Lock)
6116-33: 12 Amp Angle Grinder (Slide Switch)
6123-30
Wheel Diameter 5”/6”
Amps 12
RPM’s 9,000
Switch Type Trigger with Lock On
Guard Type 27, Tool Free Adjustment
12 Amp Trigger Grip
Angle Grinder
INCLUDES Spanner Wrench & 3-Position Side Handle
6123-31: 10 Amp Trigger Grip Angle Grinder (No Lock Switch)
6122-30A
Wheel Diameter 5”
Amps 10
RPM’s 10,000
Switch Type Trigger with Lock On
Guard Type 27, Tool Free Adjustment
10 Amp Trigger
Grip Angle Grinder
INCLUDES Spanner Wrench & 3-Position Side Handle
6122-31A: 10 Amp Trigger Grip Angle Grinder (No Lock Switch)
6160-30
Wheel Diameter 6”
Amps 12
RPM’s 9,000
Switch Type Paddle with Lock On
Guard Type 1 & 27, Tool Free Adjustment
INCLUDES Spanner Wrench & 3-Position Side Handle
6160-31: 12 Amp Angle Grinder (Paddle No Lock)
6160-33: 12 Amp Angle Grinder (Slide Switch)
12 Amp
Angle Grinder
LARGE ANGLE GRINDERS
6088-30
Wheel Diameter 7”/9”
Amps / Max HP 15 / 4.2
RPM’s 6,000
Switch Type Trigger with Lock On
Guard Type 27, Tool Free Adjustment
15 Amp
Large Angle Grinder
INCLUDES Spanner Wrench & 3-Position Side Handle
6088-31: 15 Amp Large Angle Grinder (Trigger No Lock)
G
R
I
N
4
.2
r
6089-30
Wheel Diameter 7”/9”
Amps / Max HP 15 / 4.2
RPM’s 6,000
Switch Type Trigger with Lock On
Guard Type 27, Tool Free Adjustment
15 Amp ROTO-LOK™
Large Angle Grinder
INCLUDES Spanner Wrench, 3-Position Side Handle & 9-Positiion
ROTO-LOK™ Handle
6089-31: 15 Amp ROTO-LOK™ Large Angle Grinder (Trigger No Lock)
2
17
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
CHOP SAWS
6176-20
Amps 15
Wheel Size 14”
Max HP 3.2
No Load Speed 3,900 RPM
Base Cast Iron
14” Abrasive Chop Saw
INCLUDES Vise, Abrasive Wheel & Hex Wrench
6180-20
Amps 15
Wheel Size 14”
Max HP 5.4
No Load Speed 3,900 RPM
Base Cast Iron
14” Abrasive Chop Saw
INCLUDES Vise, Abrasive Wheel & Hex Wrench
6190-20
Amps 15
Wheel Size 14”
Max HP 4.8
No Load Speed 1,500 RPM
Base Cast Iron
14” Dry-Cut Machine
INCLUDES Vise, 72 Tooth Dry Cut Carbide Tipped Blade & Hex Wrench
MITRE SAWS
6955-20
Amps 15
Blade Diameter 12”
No Load Speed 3,200 RPM
Mitre Range 52˚ Left to 52˚ Right
Bevel Range 48˚ Left to 48˚ Right
12” Dual Bevel Sliding
Compound Mitre Saw
INCLUDES (1) 60 Tooth Carbide Tipped Blade, Dust Bag & Blade Wrench
6950-20
Amps 15
Blade Diameter 12”
No Load Speed 3,200 RPM
Mitre Range 55˚ Left to 60˚ Right
Bevel Range 48˚ Left to 48˚ Right
INCLUDES (1) 60 Tooth Carbide Tipped Blade, Dust Bag & Blade Wrench
12” Dual Bevel
Compound Mitre Saw
48-08-0550 Mitre Saw Stand
t 500 lbs Weight Capacity
t Approx. 12 ft Extension Arm Span
t Quick Release Mounting Brackets
t Rubberized Wheels for Saw-On Portability
t Leveling foot
S
t
a
n
d
S
p
an
a
cket
s
-O
n Portabilit
y
18
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
HOLE HAWG DRILLS
3107-6
Chuck Size 1/2”
Amps 7
No Load Speed 0-500 RPM
Chuck Type Keyed
1/2” Right Angle Drill Kit
INCLUDES Side Handle & Carrying Case
3002-1: 1/2” Right Angle Drill Kit - 0-400+0-600 RPM, Case Included
3102-6: 1/2” Right Angle Drill Kit - 335/500/750 RPM, Case Included
ROTARY HAMMERS
5383-21
3/4” SDS Pistol Grip
Rotary Hammer
r
i
p
Amps 6
Capacity 3/4”
Drive System SDS
No Load Speed 0-1,270 RPM
No Load BPM 0-5,400
Blow Energy 1.7 ft-lbs
Drilling Modes Rotation Only
Cord Length 10’
INCLUDES Depth Gauge, Side Handle & Carrying Case
1680-21
Chuck Size 1/2”
Amps 13
No Load Speed 450/1,750 RPM
Chuck Type Keyed
INCLUDES Side Handle & Carrying Case
1680-20: 1/2” HOLE HAWG® Drill (Case Not Included)
1/2” SUPER HAWG™ Drill
1676-6
Chuck Size 1/2”
Amps 7.5
No Load Speed 300/1,200 RPM
Chuck Type Keyed
INCLUDES Pipe Handle & Carrying Case
1675-6: 1/2” HOLE HAWG® Drill (Case Not Included)
1670-1: 1/2” HOLE HAWG® Drill - 900 RPM (Case Not Included)
1/2” HOLE HAWG® Drill
INCLUDES Depth Gauge, Side Handle & Carrying Case
5363-21
1” SDS Compact
Rotary Hammer
Amps 7
Capacity 1”
Drive System SDS
No Load Speed 0-1,400 RPM
No Load BPM 0-5,980
Blow Energy 2 ft-lbs
Drilling Modes Rotation Only
Cord Length 10’
RP
M
19
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
ROTARY HAMMERS Con’t
INCLUDES Service Light, AVS (Anti Vibration System), Depth Gauge,
Side Handle & Carrying Case
5426-21
1-3/4” SDS Max
Rotary Hammer
Amps 14
Capacity 1-3/4”
Drive System SDS Max
No Load Speed 350-450 RPM
No Load BPM 2,200-2,840
Blow Energy 8.8 ft-lbs
Drilling Modes Rotation Only
Cord Length 10’
M
a
x
50
RP
M
2 840
INCLUDES Service Light, Side Handle & Carrying Case INCLUDES Service Light, Side Handle & Carrying Case
5340-21 5342-21
2” Spline Drive
Rotary Hammer
2” SDS Max
Rotary Hammer
Amps 15
Capacity 2”
Drive System Spline
No Load Speed 125-250 RPM
No Load BPM 975-1,950
Blow Energy 19.9 ft-lbs
Drilling Modes Hammer Only
Cord Length 10’
Amps 15
Capacity 2”
Drive System SDS Max
No Load Speed 125-250 RPM
No Load BPM 975-1,950
Blow Energy 19.9 ft-lbs
Drilling Modes Rotation Only
Cord Length 10’
5337-21 5446-21
Amps 14
Capacity 3/4”
Drive System Hex Drive
No Load BPM 975-1,950
Blow Energy 19.9 ft-lbs
Cord Length 10’
Amps 14
Capacity 1-3/4”
Drive System SDS Max
No Load BPM 2,200
Blow Energy 8.8 ft-lbs
Cord Length 10’
3/4” Hex Demo
Hammer
1-3/4” SDS Max
Demo Hammer
DEMO HAMMERS
INCLUDES Service Light, (2) Aux.
Handles & Carrying Case
INCLUDES AVS (Anti Vibration System) Service
Light, (2) Aux. Handles & Carrying Case
54
Am
p
C
em
o
r
R
S
4”
M
ax
0
m
m
e
r
5359-21
1-1/8” SDS L-Shape
Rotary Hammer
e
Amps 7.4
Capacity 1-1/8”
Drive System SDS
No Load Speed 0-980 RPM
No Load BPM 0-4,200
Blow Energy 2.5 ft-lbs
Drilling Modes Rotation Only
Cord Length 10’
INCLUDES Depth Gauge, Side Handle & Carrying Case
5339-21
Amps 14
Capacity 2”
Drive System SDS Max
No Load BPM 975-1,950
Blow Energy 19.9 ft-lbs
Cord Length 10’
2” SDS Max Demo
Hammer
INCLUDES Service Light, (2) Aux.
Handles & Carrying Case
20
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
1/2” HAMMER DRILLS
0100-20 0101-20
Chuck Size 1/4”
Amps 7
No Load Speed 0-2,500 RPM
Chuck Type Keyed
Cord Length 8’ QUIK-LOK™
Chuck Size 1/4”
Amps 7
No Load Speed 0-4,000 RPM
Chuck Type Keyed
Cord Length 8’ QUIK-LOK™
1/4” MAGNUM® Drill
INCLUDES Side Handle & Chuck Key
INCLUDES Side Handle, Depth Gauge & Carrying Case INCLUDES Side Handle, Depth Gauge & Carrying Case
5378-20: 1/2” Pistol Grip Hammer Drill (Case Not Included)
INCLUDES Side Handle, Depth Gauge & Carrying Case
5378-20: 1/2” Dual Speed Hammer Drill (Case & Bits
Not Included)
INCLUDES Chuck Key
PISTOL DRILLS
M
K
™
1/4” MAGNUM® Drill
M
K
™
0200-20 0201-20
Chuck Size 3/8”
Amps 7
No Load Speed 0-1,200 RPM
Chuck Type Keyed
Cord Length 8’
Chuck Size 3/8”
Amps 7
No Load Speed 0-2,500 RPM
Chuck Type Keyless Metal
Cord Length 8’
3/8” MAGNUM® Drill
INCLUDES Side Handle & Chuck Key INCLUDES Side Handle
PM
3/8” MAGNUM® Drill
P
M
M
eta
l
0202-20 0233-20
Chuck Size 3/8”
Amps 7
No Load Speed 0-1,200 RPM
Chuck Type Keyless Metal
Cord Length 8’ QUIK-LOK™
Chuck Size 3/8”
Amps 5.5
No Load Speed 0-2,800 RPM
Chuck Type Keyless Metal
Cord Length 8’
3/8” MAGNUM® Drill
INCLUDES Side Handle INCLUDES Side Handle
R
P
M
M
eta
l
LO
K
™
3/8” MAGNUM® Drill
M
ta
l
5380-21 5378-21 5387-22
Chuck Size 1/2”
Amps 9
No Load Speed 0-1,500/0-3,500 RPM
No Load BPM 0-24,000/0-56,000
Chuck Type Keyed
Cord Length 12’ Fixed 2-Wire
Trigger Lock YES
Chuck Size 1/2”
Amps 7.5
No Load Speed 0-1,350/0-2,500 RPM
No Load BPM 0-20,000/0-40,000
Chuck Type Keyed
Cord Length 10’ Fixed
Trigger Lock YES
Chuck Size 1/2”
Amps 8.5
No Load Speed 1-1,000/0-2,500 RPM
No Load BPM 0-16,000/0-40,000
Chuck Type Keyed
Cord Length 10’ QUIK-LOK™
Trigger Lock NO
1/2” Hammer
Drill
1/2” Pistol Grip
Hammer Drill
1/2” Dual Speed
Hammer Drill
21
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
PISTOL DRILLS Con’t
0299-20 0300-20
Chuck Size 1/2”
Amps 8
No Load Speed 0-850 RPM
Chuck Type Keyed
Cord Length 8’
Chuck Size 1/2”
Amps 8
No Load Speed 0-850 RPM
Chuck Type Keyed
Cord Length 8’
1/2” MAGNUM® Drill
INCLUDES Side Handle & Chuck Key INCLUDES Side Handle & Chuck Key
M
1/2” MAGNUM® Drill
M
0302-20 0234-6
Chuck Size 1/2”
Amps 8
No Load Speed 0-850 RPM
Chuck Type Keyless Metal
Cord Length 8’ QUIK-LOK™
Chuck Size 1/2”
Amps 5.5
No Load Speed 0-950 RPM
Chuck Type Keyed
Cord Length 8’ QUIK-LOK™
1/2” MAGNUM® Drill
INCLUDES Side Handle INCLUDES Side Handle & Chuck Key
M
etal
1/2” MAGNUM® Drill
M
OK
™
0235-21 0244-1 0240-22
Chuck Size 1/2”
Amps 5.5
No Load Speed 0-950 RPM
Chuck Type Keyless Metal
Cord Length 8’ QUIK-LOK™
Chuck Size 1/2”
Amps 5.5
No Load Speed 0-950 RPM
Chuck Type Keyed
Cord Length 8’ QUIK-LOK™
Chuck Size 3/8”
Amps 7.5
No Load Speed 0-2,800 RPM
Chuck Type Keyless
Cord Length 8’ Fixed
1/2”
MAGNUM® Drill
1/2”
MAGNUM® Drill
INCLUDES Side Handle INCLUDES Side Handle & Chuck Key
Compact 3/8”
MAGNUM® DRILL
1/
2”
5
.
5
0
-
950 RPM
M
®
Drill
/
2”
.5
®
Drill
9070-20
Amps 7 A
Socket Retention Detent Pin
Torque 300 ft-lbs
No Load Speed 1,800 RPM
Switch Type Rocker
Cord Length 8’
1/2” Impact Wrench
IMPACT WRENCHES
n
M
9071-20: 1/2” Impact Wrench - Friction Ring Socket Retention
9072-20
Amps 7 A
Socket Retention Detent Pin
Torque 100-300 ft-lbs
No Load Speed 600-1,800 RPM
Switch Type VSR Trigger
Cord Length 10’ QUIK-LOK™
1/2” Impact Wrench
INCLUDES Carrying Case & 6 Socket Set
n
t
-l
bs
0
RPM
e
r
22
COMING
SOON
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
IMPACT WRENCHES Con’t
9092-20
Amps 7 A
Socket Retention Friction Ring
Torque 315 ft-lbs
No Load Speed 600-1,800 RPM
Switch Type VSR Trigger
Cord Length 10’ QUIK-LOK™
7/16” Impact Wrench
n
g
RPM
r
OK
™
9075-20
Amps 7 A
Socket Retention Friction Ring
Torque 380 ft-lbs
No Load Speed 1,750 RPM
Switch Type Rocker
Cord Length 8’
3/4” Impact Wrench
g
SCREWDRIVERS
6580-20
Amps 6.5
No Load Speed 0-1,200 RPM
Drive Size 1/4” Hex
Switch Type Trigger with Lock On
Cord Length 10’ QUIK-LOK™
Amps 6.5
No Load Speed 0-2,500 RPM
Drive Size 1/4” Hex
Switch Type Trigger with Lock On
Cord Length 10’ Fixed
Adjustable Clutch
Screwdriver
0
RPM
x
with Lock
On
K
-L
O
K
™
6780-20
Metal Fastening Adjustable
Clutch Screwdriver
0
RP
M
x
with Lock
On
d
justable
6742-20
Amps 6.5
No Load Speed 0-4,000 RPM
Drive Size 1/4” Hex
Switch Type Trigger with Lock On
Cord Length 10’ Fixed
Amps 6.5
No Load Speed 0-2,500 RPM
Drive Size 1/4” Hex
Switch Type Trigger with Lock On
Cord Length 10’ Fixed
Drywall
Screwdriver
0
0
RPM
Hex
r with Lock On
6740-20
Decking, Drywall & Framing
Screwdriver
0
0
RPM
Hex
e
r with Lock
On
&
Framing
INCLUDES (2) Ramp Off Depth Locators (Drywall & Self Drilling Fasteners)
& Carrying Case
6790-20
Amps 6.5
No Load Speed 0-2,500 RPM
Drive Size 1/4” Hex
Switch Type Trigger with Lock On
Cord Length 10’ Fixed
Amps 6.5
No Load Speed 0-2,500 RPM
Drive Size 1/4” Hex
Switch Type Trigger with Lock On
Cord Length 10’ QUIK-LOK™
Self Drill Fastener
Screwdriver
0
RPM
ex
with Lock
On
6791-21
Remodeler’s
Screwdriver Kit
0
RP
M
ex
with Lock
On
23
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
SANDERS
6020-21
Amps 3
No Load Speed 1,400 OPM
Pad Size 4-1/4” x 4”
Motor Type Permanent Magnet
1/4” Sheet Palm Sander
INCLUDES Dust Bag, Punch Pad, (3) Sheets of Sandpaper & Carrying Case
6021-21
Amps 3
No Load Speed 7,000-12,000 OPM
Pad Size 5”
Motor Type Permanent Magnet
INCLUDES Dust Bag & Carrying Case
5” R.O. Palm Sander
ROUTERS
5615-20
Amps 11
No Load Speed 24,000 RPM
Collet Diameter 1/4” & 1/2”
1-3/4” Max HP
BODYGRIP® Router
INCLUDES Collet Wrenches
5615-21: Has Additional Kit Box
5616-20
Amps 13
No Load Speed 10,000-24,000 RPM
Collet Diameter 1/4” & 1/2”
INCLUDES Collet Wrenches
5616-21: Has Additional Kit Box
2-1/4” Max HP EVS
BODYGRIP® Router
M
5619-20
Amps 11
No Load Speed 24,000 RPM
Collet Diameter 1/4” & 1/2”
1-3/4” Max HP
D-Handle Router
INCLUDES Collet Wrenches
5625-20
Amps 15
No Load Speed 10,000-22,000 RPM
Collet Diameter 1/4” & 1/2”
INCLUDES Collet Wrenches
3-1/2” Max HP Fixed-Base
Production Router w/ Variable Speed,
Feedback Circuitry, & Soft-Start
M
Sp
eed,
5615-24
Amps 11
No Load Speed 24,000 RPM
Collet Diameter 1/4” & 1/2”
1-3/4” Max HP
Multi-Base Router
INCLUDES Collet Wrenches, Plunge Base, Fixed Base & Carrying Case
5616-24
Amps 13
No Load Speed 10,000-24,000 RPM
Collet Diameter 1/4” & 1/2”
INCLUDES Collet Wrenches & Carrying Case
2-1/4” Max HP EVS
Multi-Base Router
r
r
y
ing
C
ase
0R
RPM
RPM
24
CORDED TOOLS
www.MILWAUKEETOOL.COM
All Corded Tools Backed by our Exclusive
5 YEAR WARRANTY.
DIAMOND CORING RIGS
4120-22
Motor Included 4096
Height 43-1/2”
Base Cast Aluminum with
4 Leveling Screws
Feed Handle Reversable Rear
Mounted Rack & Pinion
Diamond Coring Rig W/ LARGE
Base Stand, Vac-U-Rig Kit,
Meter Box & Coring Motor 4115-20
Diamond Coring Rig W/ SMALL
Base Stand, Vac-U-Rig Kit,
Meter Box & Coring Motor
MAG PRESS
4270-21
Amps 9
No Load Speed 450 RPM
Capacity 1/2”
Drill Point Pressure 750 lbs
Drill Travel 6.6”
Compact Electromagnetic
Drill Press
INCLUDES Lubricant Spray Bottle, Nylon Safety Strap, (2) Hex Wrenches & Carrying Case
4270-20: Electromagnetic Drill Press (Case Not Included)
* Please Refer to 2006 - 2007
Catalogue for Magnet Drill Press Full Line
* Please Refer to 2006 - 2007 Catalogue
for All Other Diamond Coring Products
8975-6 8977-20
Amps 11.6 A
Air Temperature 570° F/1,000° F
Air Volume 14.8 Cubic ft/min.
Amps 11.6 A
Air Temperature 140°-1040° F
Air Volume 14.8 Cubic ft/min.
Dual Temperature
Heat Gun
Variable Temperature
Heat Gun
HEAT GUNS
8980: Includes Carrying Case 8985: Includes Carrying Case
F
f
t/
min
.
00
°
F
f
t/
min.
8978-20 8988-20
Amps 12.5 A
Air Temperature 200°-1050° F
Air Volume 14.8 Cubic ft/min.
Amps 12.5 A
Air Temperature 90°-1050° F
Air Volume 8.8 Cubic ft/min.
Variable Temperature
Heat Gun
Variable Temperature
Heat Gun w/ LED Digital
Readout Display
F
/m
in.
al
25
Motor Included 4096
Height 43-1/2”
Base Cast Aluminum with
4 Leveling Screws
Feed Handle Reversable Rear
Mounted Rack & Pinion
www.MILWAUKEETOOL.COM
INCLUDES (Folding) Lift-Hook, Wheel Kit, & Engine Oil
4960-24
Heavy-Duty 6000 WATT
Gas-Powered Generator
Engine Brand (model) Honda OHV (GX340)
Engine HP (cc) 11.0 HP (340)
Starting System Recoil
Fuel Tank Capacity 7.5 Gallons
Circuit Protection Branch-Rated (UL 489 approved)
Noise Level 70 dBA
AC Output 6000 W Max, 5500W Rated,
8250 W Surge/Start
GFCI Receptacles (4) 20A/120V 3P Outlet
(1) 20A/120V Twist-Lock
(1) 30A/120V Twist-Lock
(1) 20A/120-240V Twist-Lock
Alternator Type Brushed
Warranty (product/engine) 2 Year / 2 Year
INCLUDES (Folding) Lift-Hook, Wheel Kit, & Engine Oil
4970-24
Heavy-Duty 7000 WATT
Gas-Powered Generator
Engine Brand (model) Honda OHV (GX390)
Engine HP (cc) 13.0 HP (390)
Starting System Recoil
Fuel Tank Capacity 7.5 Gallons
Circuit Protection Branch-Rated (UL 489 approved)
Noise Level 72 dBA
AC Output 7000 W Max, 6500W Rated,
9750 W Surge/Start
GFCI Receptacles (4) 20A/120V 3P Outlet
(1) 20A/120V Twist-Lock
(1) 30A/120V Twist-Lock
(1) 20A/120-240V Twist-Lock
Alternator Type Brushed
Warranty (product/engine) 2 Year / 2 Year
4
0
)
L 489 approved)
89 approve
d)
GENERATORS
INCLUDES (Folding) Lift-Hook, Wheel Kit, & Engine Oil
4943-24
Heavy-Duty 4300 WATT
Gas-Powered Generator
Engine Brand (model) Honda OHV (GX240)
Engine HP (cc) 8.0 HP (240)
Starting System Recoil
Fuel Tank Capacity 7.5 Gallons
Circuit Protection Branch-Rated (UL 489 approved)
Noise Level 70 dBA
AC Output 4,300 W Max, 3800W Rated,
5700 W Surge/Start
GFCI Receptacles (4) 20A/120V 3P Outlet
(1) 20A/120V Twist-Lock
(1) 30A/120V Twist-Lock
(1) 20A/120-240V Twist-Lock
Alternator Type Brushed
Warranty (product/engine) 2 Year / 2 Year
INCLUDES (Folding) Lift-Hook, Wheel Kit, & Engine Oil
4950-20
Heavy-Duty 5000 WATT
Gas-Powered Generator
Engine Brand (model) Vanguard OHV (184532)
Engine HP (cc) 9.0 HP (270)
Starting System Recoil
Fuel Tank Capacity 7.5 Gallons
Circuit Protection Branch-Rated (UL 489 approved)
Noise Level 70 dBA
AC Output 5,000 W Max, 4500W Rated,
6750 W Surge/Start
GFCI Receptacles (4) 20A/120V 3P Outlet
(1) 20A/120V Twist-Lock
(1) 30A/120V Twist-Lock
(1) 20A/120-240V Twist-Lock
Alternator Type Brushed
Warranty (product/engine) 2 Year / 2 Year
5
3
2)
8
9 approve
d)
26
76>,9,+)@
www.MILWAUKEETOOL.COM
ACCESSORIES
SAWZALL® BLADES
SELECTING THE PROPER SAWZALL® BLADE for the Job
BLADE BLADE BLADE BLADE ITEM NO. ITEM NO. ITEM NO. ITEM NO.
LENGTH TPI SHAPE HEIGHT THICKNESS 1 PACK 5 PACK 25PACK 50 PACK
BLADE BLADE BLADE BLADE ITEM NO. ITEM NO. ITEM NO. ITEM NO.
LENGTH TPI SHAPE HEIGHT THICKNESS 5 PACK 25PACK 50 PACK 100 PACK
9” 4/5 Deep Tooth Design 3/4” 0.060 48-00-1304 48-00-1301 - -
12” 4/5 Deep Tooth Design 3/4” 0.060 48-00-1305 48-00-1303 - -
6” 6 Straight 3/4” 0.050 48-00-5012 - - -
6” 6 Taper/ Fleam Ground 3/4” 0.050 48-00-5015 - - 48-01-7015
9” 6 Taper/ Fleam Ground 3/4” 0.050 48-00-5016 - - 48-01-7016
12” 6 Taper/ Fleam Ground 3/4” 0.050 48-00-5017 - - -
6” 5/8 Taper 3/4” 0.050 48-00-5031 48-00-8031 48-01-6031 48-01-7031
6” 6 Taper 3/4” 0.050 48-00-5035 - 48-01-6035 -
9” 6 Taper 3/4” 0.050 48-00-5036 48-00-8036 48-01-6036 48-01-7036
12” 6 Taper 3/4” 0.050 48-00-5037 - 48-01-6037 48-01-7037
6” 4/6 Taper 1/2” 0.050 48-00-5041 - - -
1 - Identify Material to be Cut
2 - Select the Proper Teeth per Inch (TPI):
2a) 3 teeth in cut
2b) Low TPI = Fast/Rough Cuts
2c) High TPI = Slow/Clean Cuts
3 - Select Blade Length:
Width of Material + 3”
4 - Select Blade Height
Timber & Green Wood (Pruning) Blades
Wood Cutting Blades (Non-Demolition)
Std: Shorter (1/2”, 5/8”, 3/4”)
Demolition: Taller (1”)
For maximum durability
& straighter cuts.
DIAMOND GRIT
CARBIDE GRIT
24 TPI
18 TPI
14 TPI
10 TPI
8/12 TPI
8 TPI
6 TPI*
5/8 TPI
4/6 TPI
5 TPI
FASTER
ROUGHER
SLOWER
SMOOTHER
THICK
METAL
MEDIUM
METAL
THIN
METAL
SHEET
METAL
CAST
IRON
PRUNING CLEAN
WOOD
WOOD
W/NAILS
PVC
PLASTICS
ALUM/NON-
FERROUS
METAL
FIBER
GLASS,
CERAMIC
ABRASIVE
BEST PERFORMANCE
ACCEPTABLE
*Fleam ground blades for clean wood only.
TYPE OF MATERIAL
TEETH PER INCH
WIDTH WIDTH WIDTH
ANGLED IRONPVC PIPE2 X 4
.
27
76>,9,+)@
28 www.MILWAUKEETOOL.COM
SAWZALL® BLADES - Con’t
General Purpose Blades
Ice HardenedTM Metal Blades (Non-Demolition)
Metal Cutting Blades (Non-Demolition)
BLADE BLADE BLADE BLADE ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO.
LENGTH TPI SHAPE HEIGHT THICKNESS 5 PACK 25PACK 50 PACK 100 PACK 500 PACK 1,000 PACK
BLADE BLADE BLADE BLADE ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO.
LENGTH TPI SHAPE HEIGHT THICKNESS 5 PACK 25PACK 50 PACK 100 PACK 250 PACK
BLADE BLADE SHAPE BLADE BLADE ITEM NO. ITEM NO. ITEM NO. ITEM NO.
LENGTH TPI & PURPOSE HEIGHT THICKNESS 5 PACK 25PACK 50 PACK 100 PACK
4” 10 Straight 3/4” 0.035 48-00-5090 - - - - -
6” 10 Straight 3/4” 0.035 48-00-5092 - 48-01-6092 48-01-7092 - 49-01-3092
6” 8/12 Straight 3/4” 0.050 48-00-5091 - 48-01-6091 48-01-7091 - -
8” 8/12 Straight 3/4” 0.050 48-00-5093 48-00-8093 48-01-6093 48-01-7093 48-01-6000 -
12” 8/12 Straight 3/4” 0.050 48-00-5094 - 48-01-6094 - 48-01-6005 -
8” 10 Straight 5/8” 0.035 48-00-5175* - - - 48-01-6010 -
8” 10/14 Straight 5/8” 0.035 48-00-5193* - - - - -
12” 10/14 Straight 5/8” 0.035 48-00-5194* - - - - -
6” 14 Straight 5/8” 0.035 48-00-5282* - 48-01-6282* 48-01-7282* -
6” 18 Straight 5/8” 0.035 48-00-5284* - 48-01-6284* 48-01-7284* -
6” 24 Straight 5/8” 0.035 48-00-5286* - - 48-01-7286* -
4” 14 Straight 3/4” 0.035 48-00-5181 - - - -
6” 14 Straight 3/4” 0.035 48-00-5182 48-00-8182 48-01-6182 48-01-7182 -
9” 14 Straight 3/4” 0.035 48-00-5187 - 48-01-6187 48-01-7187 -
4” 18 Straight 3/4” 0.035 48-00-5183 - - - -
6” 18 Straight 3/4” 0.035 48-00-5184 48-00-8184 48-01-6184 48-01-7184 -
9” 18 Straight 3/4” 0.035 48-00-5188 - 48-01-6188 48-01-7188 -
12” 18 Straight 3/4” 0.035 48-00-5189 - 48-01-6189 48-01-7189 48-01-6015
4” 24 Straight 3/4” 0.035 48-00-5185 - - - -
6” 24 Straight 3/4” 0.035 48-00-5186 48-00-8186 48-01-6186 48-01-7186 -
6” 8/12 Straight - General Purpose 3/4” 0.050 48-00-4091 - 48-01-9091 -
8” 8/12 Straight - General Purpose 3/4” 0.050 48-00-4093 - 48-01-9093 -
6” 14 Straight - Metal Cutting 3/4” 0.035 48-00-4182 - 48-01-9182 -
9” 14 Straight - Metal Cutting 3/4” 0.035 48-00-4187 - 48-01-9187 -
6” 18 Straight - Metal Cutting 3/4” 0.035 48-00-4184 - 48-01-9184 -
9” 18 Straight - Metal Cutting 3/4” 0.035 48-00-4188 - 48-01-9188 -
6” 24 Straight - Metal Cutting 3/4” 0.035 48-00-4186 - 48-01-9186 -
12” 18 Straight - Metal Cutting 3/4” 0.035 48-00-4189 - - -
ACCESSORIES
<W;V 3VUNLY3PML
* 5/8” Height profile for higher flexibility
* 5/8” Height profile for higher flexibility
NO.
76>,9,+)@
SAWZALL® BLADES - Con’t
Ice HardenedTM Demolition Blades*
Demolition Blades *
BLADE BLADE SHAPE BLADE BLADE ITEM NO. ITEM NO. ITEM NO. ITEM NO. BLADE
LENGTH TPI & PURPOSE HEIGHT THICKNESS 5 PACK 25PACK 50 PACK 100 PACK SUB-BRAND
BLADE BLADE SHAPE BLADE BLADE ITEM NO. ITEM NO. ITEM NO. ITEM NO. BLADE
LENGTH TPI & PURPOSE HEIGHT THICKNESS 5 PACK 25PACK 50 PACK 100 PACK SUB-BRAND
6” 5/8 Taper - Wood 1” 0.062 48-00-5021 48-00-8021 - 48-01-7021 AX
9” 5/8 Taper - Wood 1” 0.062 48-00-5026 48-00-8026 - 48-01-7026 AX
12” 5/8 Taper - Wood 1” 0.062 48-00-5027 48-00-8027 - 48-01-7027 AX
6” 8 Taper - Gen Purpose 1” 0.062 48-00-5701 48-00-8701 - 48-01-7701 WRECKER
9” 8 Taper - Gen Purpose 1” 0.062 48-00-5706 48-00-8706 - 48-01-7706 WRECKER
12” 8 Taper - Gen Purpose 1” 0.062 48-00-5711 48-00-8711 - 48-01-7711 WRECKER
6” 8 Straight - Gen Purpose 1” 0.062 48-00-5700 48-00-8700 - - WRECKER
9” 8 Straight - Gen Purpose 1” 0.062 48-00-5705 48-00-8705 - - WRECKER
12” 8 Straight - Gen Purpose 1” 0.062 48-00-5710 48-00-8710 - - WRECKER
6” 10 Straight - Metal 1” 0.042 48-00-5712 48-00-8712 - 48-01-7712 TORCH
9” 10 Straight - Metal 1” 0.042 48-00-5713 48-00-8713 - 48-01-7713 TORCH
6” 14 Straight - Metal 1” 0.042 48-00-5782 48-00-8782 - 48-01-7782 TORCH
9” 14 Straight - Metal 1” 0.042 48-00-5787 48-00-8787 - 48-01-7787 TORCH
6” 18 Straight - Metal 1” 0.042 48-00-5784 48-00-8784 - 48-01-7784 TORCH
9” 18 Straight - Metal 1” 0.042 48-00-5788 48-00-8788 - 48-01-7788 TORCH
12” 18 Straight - Metal 1” 0.042 48-00-5789 48-00-8789 - 48-01-7789 TORCH
6” 10 Straight - Metal 1” 0.042 48-00-4712 - 48-01-9712 - TORCH
9” 10 Straight - Metal 1” 0.042 48-00-4713 - 48-01-9713 - TORCH
6” 14 Straight - Metal 1” 0.042 48-00-4782 - 48-01-9782 - TORCH
9” 14 Straight - Metal 1” 0.042 48-00-4787 - 48-01-9787 - TORCH
6” 18 Straight - Metal 1” 0.042 48-00-4784 - 48-01-9784 - TORCH
9” 18 Straight - Metal 1” 0.042 48-00-4788 - 48-01-9788 - TORCH
ACCESSORIES
www.MILWAUKEETOOL.COM
BLADE SHAPE BLADE BLADE ITEM NO. ITEM NO. ITEM NO. ITEM NO.
LENGTH TPI & PURPOSE HEIGHT THICKNESS 5 PACK 25PACK 50 PACK 100 PACK
3-5/8” 10 Straight - Scroll Wood 5/16” 0.035 48-00-5161 - - -
3-5/8” 14 Straight - Scroll Metal 5/16” 0.035 48-00-5162 - - -
3-5/8” 18 Straight - Scroll Metal 5/16” 0.035 48-00-5163 - - -
5” 6 Taper-Plaster 3/4” 0.05 48-00-5052 - - -
Specialty Blades - Plaster & Scroll Cutting
* Demo Blades = Taller and Thicker for straight, accurate cuts and maximum durability
* Demo Blades = Taller and Thicker for straight, accurate cuts and maximum durability
<W;V 3VUNLY3PML
29
76>,9,+)@
30 www.MILWAUKEETOOL.COM
SAWZALL® BLADES - Con’t
SAWZALL® BLADES Troubleshooting Guide
ACCESSORIES
ITEM NO. DESCRIPTION
49-22-1129 12 pc Demolition Set
49-22-1131 14 pc Ice Hardened Set
49-22-1145 9 pc General Purpose Set
Sawzall® Blade Sets
BLADE SHAPE BLADE BLADE ITEM NO. ITEM NO. ITEM NO. BLADE
LENGTH TOOTH & PURPOSE HEIGHT THICKNESS 1 PACK 3 PACK 50 PACK SUB-BRAND
6” Diamond Straight - Cast Iron 1” 0.042 48-00-1440 - - TORCH
9” Diamond Straight - Cast Iron 1” 0.042 48-00-1450 - - TORCH
3-1/2” Carbide Straight - Abrasive Materials 1/2” 0.032 - 48-00-1410 - -
4” Carbide Straight - Abrasive Materials 3/4” 0.032 - 48-00-1400 - -
6” Carbide Straight - Abrasive Materials 3/4” 0.032 48-00-1421 48-00-1420 48-01-6420 -
9” Carbide Straight - Abrasive Materials 3/4” 0.039 48-00-1431 48-00-1430 48-01-6430 -
Specialty Blades - Fiberglass, Ceramic Tile, Cast Iron & Other Abrasive Materials
USER NEED / PROBLEM RECOMMENDED BLADE
FLUSH CUTS STANDARD BLADE
RADIUS CUTS STANDARD BLADE
FAST CUTS LOWER TPI
PLUNGE CUTTING THE AXTM / THE WRECKER TM
STRAIGHTER CUTS THE AXTM / THE TORCH® / THE WRECKER TM
BLADES BENDING / BREAKING THE AXTM / THE TORCH® / THE WRECKER TM
TEETH BREAKING THE AXTM / THE TORCH® / THE WRECKER TM
TEETH DULLING ICE HARDENEDTM
TEETH DULLING / BREAKING ICE HARDENEDTM / THE TORCH®
76>,9,+)@
www.MILWAUKEETOOL.COM
HACKZALLTM BLADES
BI-METAL BANDSAW BLADES
NEW! COMPACT BI-METAL BANDSAW BLADES
ACCESSORIES
Wood Scroll 3-1/2” 10 49-00-5310
Metal Scroll 3-1/2” 24 49-00-5324
Fiberglass 4” GRIT 49-00-5400
Multi-Material 4” 10 49-00-5410
PVC 4” 14 49-00-5414
PVC 6” 14 49-00-5614
EMT 4” 18 49-00-5418
Duct 4” 24 49-00-5424
Wood 4” 6 49-00-5460
Plaster 4” 6 49-00-5461
Wood/EMT/PVC/Duct SET MIX 49-22-0220
BLADE ITEM
MATERIAL LENGTH TPI PACK NO.
44-7/8” 10 48-39-0500 - 48-39-0501 48-39-0502 5/16” & Up
44-7/8” 14 48-39-0510 48-39-0514 48-39-0511 48-39-0512 3/16” to 5/16”
44-7/8” 18 48-39-0520 48-39-0524 48-39-0521 48-39-0522 5/32” to 3/16”
44-7/8” 24 48-39-0530 48-39-0534 48-39-0531 48-39-0532 Up to 5/32”
44-7/8” 10/14 48-39-0550 48-39-0554 48-39-0551 48-39-0552 3/16” to 1/2”
44-7/8” 14/18 48-39-0560 - 48-39-0561 48-39-0562 5/32” to 5/16”
35.395” 10 48-39-0508 - 48-39-0509 48-39-0507 5/16” & Up
35.395” 14 48-39-0518 - 48-39-0519 48-39-0517 3/16” to 5/16”
35.395” 18 48-39-0528 - 48-39-0529 48-39-0527 5/32” to 3/16”
35.395” 24 48-39-0538 - 48-39-0539 48-39-0537 Up to 5/32”
BLADE ITEM NO. ITEM NO. ITEM NO. ITEM NO. DIAMETER / APPLICATION
LENGTH TPI 1 PACK 2 PACK 3 PACK 100 PACK WALL THICKNESS
BLADE ITEM NO. ITEM NO. ITEM NO. ITEM NO. DIAMETER / APPLICATION
LENGTH TPI 1 PACK 2 PACK 3 PACK 100 PACK WALL THICKNESS
MORE CUTS PER CHARGE
IN THE HACKZALLTM TOOL
35%
UP TO
*
High speed cutting of aluminum, angle iron,
bronze, brass, copper, galvanized pipe & mild steel.
Slow speed cutting of tougher steels: stainless,
chrome, tungsten steel.
Interrupted cutting applications: tubing,
structurals, etc
High speed cutting of aluminum, angle iron,
bronze, brass, copper, galvanized pipe & mild steel.
Slow speed cutting of tougher steels: stainless,
chrome, tungsten steel.
* Versus a standard SawzallTM Blade
31
76>,9,+)@
32 www.MILWAUKEETOOL.COM
ICE HARDENEDTM BI-METAL HOLE SAWS
ICE HARDENEDTM Bi-Metal Hole Saw Sets
Pilot Drill Bits
ACCESSORIES
5/8” 49-56-0012 - -
11/16” 49-56-0017 - -
3/4” 49-56-0023 49-56-5090 25
13/16” 49-56-0027 - -
7/8” 49-56-0032 49-56-5100 25
15/16” 49-56-0037 - -
1” 49-56-0043 49-56-5110 25
1-1/16” 49-56-0047 - -
1-1/8” 49-56-0052 49-56-5120 25
1-3/16” 49-56-0057 - -
1-1/4” 49-56-0062 49-56-5130 25
1-5/16” 49-56-0067 - -
1-3/8” 49-56-0072 49-56-5140 25
1-7/16” 49-56-0077 - -
1-1/2” 49-56-0082 49-56-5150 25
1-9/16” 49-56-0087 - -
1-5/8” 49-56-0092 49-56-5152 25
1-11/16” 49-56-0097 - -
1-3/4” 49-56-0102 49-56-5155 25
1-13/16” 49-56-0107 - -
1-7/8” 49-56-0112 - -
2” 49-56-0117 49-56-5160 25
2-1/16” 49-56-0122 - -
2-1/8” 49-56-0127 49-56-5165 25
2-1/4” 49-56-0132 49-56-5167 25
10PC ELECTRICIAN 49-22-4095
10PC PLUMBER 49-22-4145
15PC ALL PURPOSE 49-22-4175
18PC PLUMBER 49-22-4155
19PC ELECTRICIAN 49-22-4105
29PC ALL PURPOSE 49-22-4185
2-5/16” 49-56-0137 - -
2-3/8” 49-56-0142 - -
2-1/2” 49-56-0147 49-56-5170 25
2-9/16” 49-56-0153 - -
2-5/8” 49-56-0158 49-56-5175 16
2-3/4” 49-56-0163 - -
2-7/8” 49-56-0167 - -
3” 49-56-0173 49-56-5180 16
3-1/8” 49-56-0177 - -
3-1/4” 49-56-0183 - -
3-3/8” 49-56-0187 - -
3-1/2” 49-56-0193 49-56-5190 9
3-5/8” 49-56-0197 49-56-5195 9
3-3/4” 49-56-0203 - -
3-7/8” 49-56-0207 - -
4” 49-56-0213 49-56-5200 9
4-1/8” 49-56-0217 49-56-5205 9
4-1/4” 49-56-0223 - -
4-3/8” 49-56-0227 - -
4-1/2” 49-56-0233 - -
4-3/4” 49-56-0237 - -
5” 49-56-0243 - -
5-1/2” 49-56-0247 - -
6” 49-56-0253 - -
ITEM NO. ITEM NO. BULK
DIAMETER 1 PACK BULK PACK PACK QTY
DESCRIPTION ITEM NO. DESCRIPTION ITEM NO.
ITEM NO. ITEM NO. BULK
DIAMETER 1 PACK BULK PACK PACK QTY
<W;V 3VUNLY3PML
Wood or Metal 49-56-8000 49-56-8031 12
Light Gauge Metals 49-56-8002 - -
Wood or Metal 49-56-8003 49-56-8032 12
Wood or Metal 49-56-8010 49-56-8033 12
Hole Saw Arbours
9/16” to 1-3/16” 49-56-7000 49-56-8000
9/16” to 1-3/16” 49-56-7010 49-56-8010
1-1/4” & up 49-56-7150 49-56-8010
1-1/4” & up 49-56-7055 49-56-8000
1-1/4” & up 49-56-7140 49-56-8000
1-1/4” & up 49-56-9100 -
HOLE SAW ITEM NO. STANDARD
DIAMETER 1 PACK PILOT
TYPE OF ITEM NO. ITEM NO. BULK
CUTTING 1 PACK BULK PACK PACK QTY USE WITH ARBOURS
DESIGNED FOR FINE
WOOD BORING
Fast Plug Removal
with Functional Slots
Up to 2X Faster Cutting
due to Optimized Tooth Form
49-56-6950, 49-56-7000, 49-56-7055, 49-56-7140
49-56-6950, 49-56-7000, 49-56-7055, 49-56-7140
49-56-6960
49-56-7010, 49-56-7150
*
* Than Other Bi-Metal Hole Saws
76>,9,+)@
www.MILWAUKEETOOL.COM
SELFEED BITS
1” 48-25-1001 48-25-1002 7/16” Q/C, Single Cutter
1-1/8” 48-25-1121 48-25-1122 7/16” Q/C, Single Cutter
1-1/4” 48-25-1251 48-25-1252 7/16” Q/C, Single Cutter
1-3/8” 48-25-1371 48-25-1372 7/16” Q/C, Single Cutter
1-1/2” 48-25-1501 48-25-1502 7/16” Q/C, Single Cutter
1-3/4” 48-25-1751 48-25-1752 7/16” Q/C, Single Cutter
2” 48-25-2001 48-25-2002 7/16” Q/C, Single Cutter
2-1/8” 48-25-2121 48-25-2122 7/16” Q/C, Single Cutter
2-1/4” 48-25-2251 48-25-2252 7/16” Q/C, Single Cutter
2-9/16” 48-25-2561 48-25-2562 7/16” Q/C, Single Cutter
3” 48-25-3001 - 3 Flat, Double Cutter
3-5/8” 48-25-3621 - 3 Flat, Double Cutter
4-1/8” 48-25-4125 - 3 Flat, Double Cutter
4-5/8” 48-25-4621 - 3 Flat, Double Cutter
* Q/C = Quick Change
ACCESSORIES
ITEM NO. ITEM NO.
DIAMETER BOX CLAMSHELL SHANK & CUTTER
3PC PLUMBER SET 49-22-0030
8PC PLUMBER SET (SELFEED & AUGER) 49-22-0065
5PC CONTRACTOR SET 49-22-0135
8PC CONTRACTOR SET 49-22-0130
SELFEED SERV. KIT SM 48-25-6000
SELFEED SERV. KIT FOR 3”+ DIAMETERS 48-25-7000
DESCRIPTION ITEM NO.
Selfeed Sets
7/16” Shank1/4” Shank
BIG HAWG® Arbours and Sets
BIG HAWG® HOLE CUTTERS
BIG HAWG® PILOT 48-27-1401
BIG HAWG® ARBOUR 49-56-9105
7PC BIG HAWG® SET 49-56-9075
10PC BIG HAWG® SET 49-56-9085
DESCRIPTION ITEM NO.
2-1/8” 49-56-9000
2-1/4” 49-56-9005
2-9/16” 49-56-9010
3” 49-56-9020
3-5/8” 49-56-9030
4-1/4” 49-56-9045
4-5/8” 49-56-9050
6-1/4” 49-56-9065
ITEM NO.
DIAMETER 1 PACK
DESIGNED FOR ROUGH WOOD BORING
Up to 600 Holes
Without Resharpening due to
3 Hardened Steel Teeth
Easy Plug Removal
due to 3 Deep Gullets and Big Hawg® Arbour
Up to 10X Faster
than Hole Saws due to Agressive Tooth Geometry
QUIK-LOK® EXTENSIONS
5-1/2” QUIK LOK® EXTENSION 48-28-1030
12” QUIK LOK® EXTENSION 48-28-1040
18” QUIK LOK® EXTENSION 48-28-1050
24” QUIK LOK® EXTENSION 48-28-1060
3” QUIK LOK® EXTENSION 48-28-1000
6” QUIK LOK® EXTENSION 48-28-1010
12” QUIK LOK® EXTENSION 48-28-1020
DESCRIPTION ITEM NO.DESCRIPTION ITEM NO.
33
34 www.MILWAUKEETOOL.COM
SWITCHBLADETM SELFEED BITS
1-3/8” 48-25-5220 48-25-5320
1-1/2” 48-25-5225 48-25-5325
2” 48-25-5235 48-25-5335
2-1/8” 48-25-5240 48-25-5340
2-9/16” 48-25-5250 48-25-5350
1-3/8” 48-25-5120
1-1/2” 48-25-5125
2” 48-25-5135
2-1/8” 48-25-5140
2-9/16” 48-25-5150
ITEM NO.
DIAMETER 1 PACK
ITEM NO. ITEM NO.
DIAMETER 3 PACK 10 PACK
5PC SWITCHBLADE SET 49-22-5100
FEEDSCREW REPLACEMENT PACK 48-25-5275
DESCRIPTION ITEM NO.
SWITCHBLADETM Selfeed Set
SWITCHBLADETM Replacement BladesSWITCHBLADETM Bits
Up to
12X Faster
Due to Aggressive
Feedscrew Design
Up to 2X Life
of Regular Selfeed Bits
NO RESHARPENING NEEDED
1
Remove
2
Replace
3
Ready to Go
1
2
3
DESIGNED FOR REPETITIVE WOOD BORING WITH GREAT LIKELIHOOD OF NAIL IMPACT.
ACCESSORIES
1/4” 48-27-0251
5/16” 48-27-0311
3/8” 48-27-0371
7/16” 48-27-0441
1/2” 48-27-0501
9/16” 48-27-0561
5/8” 48-27-0621
11/16” 48-27-0681
3/4” 48-27-0751
13/16” 48-27-0811
7/8” 48-27-0871
15/16” 48-27-0941
1” 48-27-1001
1-1/8” 48-27-1121
1-1/4” 48-27-1251
1-3/8” 48-27-1371
1-1/2” 48-27-1501
DIAMETER ITEM NO.
1 PACK
6” Flatboring Bits
FLATBORING BITS
1/2” 48-27-0070
5/8” 48-27-0075
3/4” 48-27-0080
7/8” 48-27-0085
15/16” 48-27-0090
1” 48-27-0095
1-1/8” 48-27-0100
1-1/4” 48-27-0200
1-1/2” 48-27-0205
DIAMETER ITEM NO.
1 PACK
3-1/2” Stubby Flatboring Bits*
6PC STUBBY SET 49-22-0185
8PC 6” SET 49-22-0175
DIAMETER ITEM NO.
1 PACK
3/8” 48-27-0170
1/2” 48-27-0175
5/8” 48-27-0180
3/4” 48-27-0185
7/8” 48-27-0190
1” 48-27-0195
DIAMETER ITEM NO.
1 PACK
16” Flatboring Bits
Flatboring Sets
DESIGNED FOR CLEAN WOOD DRILLING.
Ideal for
Pulling
Wires
Double
Wing
Spur
for Easy
Hole Formation
1/4”
Quick
Change
Shank
* Stubby bits do not come with hole
at tip for pulling wires
ACCESSORIES
www.MILWAUKEETOOL.COM
SHIP AUGER BITS
DESIGNED FOR NAIL AND STAPLE EMBEDDED WOOD.
11/16” 48-13-0683
3/4” 48-13-0753
13/16” 48-13-0813
7/8” 48-13-0873
15/16” 48-13-0933
1” 48-13-1003
1-1/16” 48-13-1063
1-1/8” 48-13-1123
1-1/4” 48-13-1253
1-3/8” 48-13-1373
1-1/2” 48-13-1503
3/8” 48-13-5500
7/16” 48-13-5520
1/2” 48-13-5540
9/16” 48-13-5560
5/8” 48-13-5620
11/16” 48-13-5680
3/4” 48-13-5750
13/16” 48-13-5810
7/8” 48-13-5870
15/16” 48-13-5930
1” 48-13-6000
1-1/16” 48-13-6010
1-1/8” 48-13-6120
1-1/4” 48-13-6250
1-3/8” 48-13-6370
1-1/2” 48-13-6500
ITEM NO.
DIAMETER 1 PACK
ITEM NO.
DIAMETER 1 PACK
ITEM NO.
DIAMETER 1 PACK
6” Ship Auger Bits 18” Ship Auger Bits
DESCRIPTION ITEM NO.
Ship Auger Bit Set
Non-Stick
Coated Flutes
for Faster Chip Ejection
Open Flute
Design
for Efficient Chip
Removal in Deep
Boring Applications
7/16”
Impact
Rated
Shank 3PC SET 48-13-3000
1/2” 48-13-0700
5/8” 48-13-0725
3/4” 48-13-0750
7/8” 48-13-0870
1” 48-13-1000
1-1/8” 48-13-1120
1-1/4” 48-13-1250
1-3/8” 48-13-1370
1-1/2” 48-13-1500
ITEM NO.
DIAMETER 1 PACK
6-1/2” Spur Auger Bits
Non-Stick
Coated Flutes
for Faster Chip Ejection
SPUR AUGER BITS
DESIGNED FOR CLEAN WOOD DRILLING.
Solid Flute
Design
for Strength & Rigidity
7/16”
Impact
Rated
Shank
4PC SET 48-13-4000
DESCRIPTION ITEM NO.
Spur Auger Bit Set
35
ACCESSORIES
www.MILWAUKEETOOL.COM
NEW! THUNDERBOLT® BLACK OXIDE BITS
DESIGNED FOR GENERAL PURPOSE DRILLING.
19/64” 48-89-2725 48-89-2835 6
5/16” 48-89-2726 48-89-2836 6
21/64” 48-89-2727 48-89-2837 6
11/32” 48-89-2728 48-89-2838 6
23/64” 48-89-2729 48-89-2839 6
3/8” 48-89-2730 48-89-2840 6
25/64” 48-89-2731 48-89-2841 6
13/32” 48-89-2732 48-89-2842 6
27/64” 48-89-2733 48-89-2843 6
7/16” 48-89-2734 48-89-2844 6
29/64” 48-89-2735 48-89-2845 6
15/32” 48-89-2736 48-89-2846 6
31/64” 48-89-2737 48-89-2847 6
1/2” 48-89-2738 48-89-2848 6
ITEM NO. ITEM NO. BULK
DIAMETER 1 PACK BULK PACK PACK QTY.
ThunderBolt® Web
- Thicker Web Than a Standard
Drill Bit
- Less Breakage = Longer Life
- Unique Spiral Design & Parabolic
Flute Clears Chips Faster
135° Split Point
Penetrates Quickly & Requires
No Effort
Black Oxide
Coating
Resists Corrosion
3-Flat Shank
Grips Securely in Drill
& Won’t Slip in Chuck
1/16” 48-89-2710* 48-89-2820 12
5/64” 48-89-2711* 48-89-2821 12
3/32” 48-89-2712* 48-89-2822 12
7/64” 48-89-2713* 48-89-2823 12
1/8” 48-89-2714* 48-89-2824 12
9/64” 48-89-2715 48-89-2825 12
5/32” 48-89-2716 48-89-2826 12
11/64” 48-89-2717 48-89-2827 12
3/16” 48-89-2718 48-89-2828 12
13/64” 48-89-2719 48-89-2829 12
7/32” 48-89-2720 48-89-2830 12
15/64” 48-89-2721 48-89-2831 12
1/4” 48-89-2722 48-89-2832 12
17/64” 48-89-2723 48-89-2833 6
9/32” 48-89-2724 48-89-2834 6
ITEM NO. ITEM NO. BULK
DIAMETER 1 PACK BULK PACK PACK QTY.
Black Oxide Bits - Jobber Length
* 2 Per Pack
SELECTING THE PROPER DRILL BIT for the Job
1 - Identify Material Being Drilled Into
2 - Select Appropriate Drill Bit Type:
Black Oxide
For General Purpose Drilling
Titanium
For Longer Life
Cobalt
For Especially Hard Metals
TYPE OF MATERIAL
WOOD
PLASTIC/
DRYWALL
STAINLESS
STEEL
SHEET
METAL
MILD STEEL
CAST IRON
ALUMINUM &
OTHER NON-
FERROUS METALS
BLACK
OXIDE TITANIUM COBALT
RECOMMENDED ACCEPTABLE
TYPE OF DRILL BIT
3X
Life
Up to
36
ACCESSORIES
www.MILWAUKEETOOL.COM
NEW! THUNDERBOLT® BLACK OXIDE BITS - Con’t
NEW! THUNDERBOLT® TITANIUM DRILL BITS
DESIGNED FOR GENERAL PURPOSE DRILLING, ESPECIALLY INTO HARD METALS.
15PC Set 48-89-2803
21PC Set 48-89-2801
29PC Set 48-89-2802
14PC SET 48-89-001
29PC SET 48-89-0012
DESCRIPTION ITEM NO.
DESCRIPTION ITEM NO.
Black Oxide Drill Bit Sets
Titanium Drill Bits - Jobber Length
Titanium Drill Bit Sets
1/8” 48-89-2770
3/16” 48-89-2771
1/4” 48-89-2772
5/16” 48-89-2773
3/8” 48-89-2774
7/16” 48-89-2775
1/2” 48-89-2776
ITEM NO.
DIAMETER 1 PACK
12” Black Oxide
Aircraft Drill Bits
1/16” 48-89-2201*
5/64” 48-89-2202*
3/32” 48-89-2203*
7/64” 48-89-2204*
1/8” 48-89-2205*
9/64” 48-89-2206
5/32” 48-89-2207
11/64” 48-89-2208
3/16” 48-89-2209
7/32” 48-89-2211
15/64” -
1/4” 48-89-2213
17/64” 48-89-2214
9/32” -
19/64” -
5/16” 48-89-2217
* 2 per pack
21/64” 48-89-2218
11/32” 48-89-2219
23/64” -
3/8” 48-89-2221
25/64” -
13/32” 48-89-2223
27/64” -
7/16” 48-89-2225
29/64” -
15/32” -
31/64” -
1/2” 48-89-2229
ITEM NO.
DIAMETER 1 PACK
ITEM NO.
DIAMETER 1 PACK
17/32” 48-89-2739
9/16” 48-89-2740
19/32” 48-89-2741
5/8” 48-89-2742
21/32” 48-89-2743
11/16” 48-89-2744
23/32” 48-89-2745
3/4” 48-89-2746
25/32” 48-89-2747
13/16” 48-89-2748
27/32” 48-89-2749
7/8” 48-89-2750
29/32” 48-89-2751
15/16” 48-89-2752
31/32” 48-89-2753
1” 48-89-2754
1-1/16” 48-89-2755
1-1/8” 48-89-2756
1-3/16” 48-89-2757
1-1/4” 48-89-2758
ITEM NO.
DIAMETER 1 PACK
ITEM NO.
DIAMETER 1 PACK
Black Oxide Bits - Silver & Deming
ThunderBolt® Web
- Thicker Web than a Standard
Drill Bit
- Less Breakage = Longer Life
- Unique Spiral Design & Parabolic
Flute Clears Chips Faster
135° Split Point
Penetrates Quickly & Requires
No Effort
3-Flat Shank
Grips Securely & Won’t Slip
in Chuck
COMPARED TO BLACK OXIDE DRILL BITS
3XLonger Life
UP TO
37
ACCESSORIES
www.MILWAUKEETOOL.COM
NEW! THUNDERBOLT® COBALT DRILL BITS
DESIGNED FOR DRILLING INTO CAST IRON & STAINLESS STEEL.
Cobalt Drill Bits - Jobber Length
1/16” -
5/64” -
3/32” 48-89-2303*
7/64” 48-89-2304*
1/8” 48-89-2305*
9/64” 48-89-2306
5/32” 48-89-2307
11/64” -
3/16” 48-89-2309
13/64” -
7/32” -
15/64” -
1/4” 48-89-2313
17/64” -
9/32” -
* 2 per pack
19/64” -
5/16” 48-89-2317
21/64” -
11/32” -
23/64” -
3/8” 48-89-2321
25/64” -
13/32” -
27/64” -
7/16” -
29/64” -
15/32” -
31/64” -
1/2” -
DIAMETER ITEM NO.
DIAMETER ITEM NO. DESCRIPTION ITEM NO.
Cobalt Drill Bit Set
Laser Etched
Marks
Help Identify
Drilling Depth
3 Flat
Shank
Grips Securely
& Won’t Slip
in Chuck
NEW! BRAD POINT & FORSTNER BITS
DESIGNED FOR DRILLING SMOOTH HOLES IN WOOD.
1/8” 48-15-0125
3/16” 48-15-0185
1/4” 48-15-0250
5/16” 48-15-0312
3/8” 48-15-0375
7/16” 48-15-0437
1/2” 48-15-0500
3/8” 48-14-0376
1/2” 48-14-0501
5/8” 48-14-0626
3/4” 48-14-0751
1” 48-14-1001
1-3/8” 48-14-1374
35 mm 48-14-1376
ITEM NO.
DIAMETER 1 PACK
ITEM NO.
DIAMETER 1 PACK
Brad Point Bits Forstner Bits
DIAMETER ITEM NO.
Forstner Bit Set
4PC SET 48-14-0004
* Includes 1/4”, 1/2”, 5/8”, 3/4”
ThunderBolt® Web
- Thicker Web Than a Standard
Drill Bit
- Less Breakage = Longer Life
- Unique Spiral Design & Parabolic
Flute Clears Chips Faster
135° Split Point
Penetrates Quickly & Requires
No Effort
3-Flat Shank
Grips Securely in Drill
& Won’t Slip in Chuck
14PC SET 48-89-0026
38
ACCESSORIES
www.MILWAUKEETOOL.COM
NEW! SHOCKWAVETM BITS
DESIGNED FOR DRIVING APPLICATIONS, ESPECIALLY WITH IMPACT DRIVERS.
#1 Phillips 1” Bit - 48-32-4411 - -
#2 Phillips 1” Bit - 48-32-4412 48-32-4601 48-32-4604*
#3 Phillips 1” Bit - 48-32-4413 - -
#2 Phillips Reduced Diameter - 48-32-4444 - -
#2 Phillips 2” Power Bit 48-32-4462 - 48-32-4602 -
#3 Phillips 2” Power Bit 48-32-4463 - - -
#2 Phillips 3-1/2” Power Bit 48-32-4562 - - -
#1 Square Recess 1” Bit - 48-32-4421 - -
#2 Square Recess 1” Bit - 48-32-4422 48-32-4605 48-32-4607**
#3 Square Recess 1” Bit - 48-32-4423 - -
#1 Square Recess 2” Power Bit 48-32-4471 - - -
#2 Square Recess 2” Power Bit 48-32-4472 - 48-32-4606 -
#3 Square Recess 2” Power Bit 48-32-4473 - - -
#2 Square 3-1/2” Power Bit 48-32-4572 - - -
T15 Torx 2” Power Bit 48-32-4483 - - -
T20 Torx 2” Power Bit 48-32-4484 - - -
T25 Torx 2” Power Bit 48-32-4485 - - -
T30 Torx 2” Power Bit 48-32-4487 - - -
29 PC SET 48-32-4401
2.36” Impact Magnetic Bit Holder 48-32-4502
3” Impact Magnetic Bit Holder 48-32-4503
* Pack of 25 ** Pack of 10
ITEM NO. ITEM NO. ITEM NO. BULK TIC
DESCRIPTION 1 PACK 2 PACK 5 PACK TAC PACK
ShockwaveTM Impact Duty Driving Bits
* patent pending
* patent pending
Shock Zone Geometry™ *
Designed to flex
with spring-like action.
Reduces stress
at the tip
Custom Engineered
Steel & Heat Treatment
High shock resistance
Compression Forged Tip
Ideal fit and reduces breakage
™
*
Shockwave Absorbs Impact
& Completes Application
Standard Bit High Stress Failure Point
high stress
low stress
Standard Bit SHOCKWAVE Bit
high stress
low stress
Standard Bit SHOCKWAVE Bit
IMPACT DRIVING STRESS COMPARISON
STANDARD BIT VS. SHOCKWAVE™ BIT
STANDARD BIT SHOCKWAVETM BIT
STANDARD BIT SHOCKWAVETM BIT
ing
-
-
-
-
2-
460
7**
* pa
tent pen
di
*pa
tent pen
di
*
*
*SHOCK
ZONE
.,64,;9@;4
39
ACCESSORIES
www.MILWAUKEETOOL.COM
1/4” 1-7/8” 49-66-4502 49-66-4522
5/16” 1-7/8” 49-66-4503 49-66-4523
3/8” 1-7/8” 49-66-4505 49-66-4525
7/16” 1-7/8” 49-66-4506 49-66-4526
1/4” 2-9/16” 49-66-4532 -
5/16” 2-9/16” 49-66-4533 -
3/8” 2-9/16” 49-66-4535 -
7/16” 2-9/16” 49-66-4536 -
3PC Set (1/4”, 5/16”, 3/8”) 1-7/8” 49-66-4561 -
4PC Set (1/4”, 5/16”, 3/8”, 7/16”) 1-7/8” 49-66-4562 -
ITEM NO. ITEM NO.
DIAMETER LENGTH 1 PACK 3 PACK
ShockwaveTM Impact Duty Magnetic Nut Drivers
DESCRIPTION ITEM NO. 1 PACK
1/16” 48-89-4401
3/32” 48-89-4403
1/8” 48-89-4405
5/32” 48-89-4407
3/16” 48-89-4409
7/32” 48-89-4411
1/4” 48-89-4413
7PC Set 48-89-4431
ITEM NO.
DIAMETER 1 PACK
ShockwaveTM Impact Duty
Drill Bit
ITEM NO.
DIAMETER 1 PACK
ShockwaveTM Impact Duty
Deep Well 3/8” Sockets
5/16” 49-66-4422
3/8” 49-66-4424
7/16” 49-66-4425
1/2” 49-66-4426
9/16” 49-66-4427
5/8” 49-66-4428
11/16” 49-66-4429
3/4” 49-66-4430
13/16” 49-66-4431
7/8” 49-66-4432
8PC Set 49-66-4419
(5/16”, 3/8”, 7/16”, 1/2”,
9/16”, 5/8”, 11/16”, 3/4”)
3/8” Square x 1/4” Hex Adapter 48-03-4405
1/2” Square x 1/4” Hex Adapter 48-03-4410
DESCRIPTION ITEM NO. 1 PACK
ShockwaveTM Impact Duty Socket Adapters
1/4” Hex Shank to 1/4” Socket Adapter 48-32-5030
1/4” Hex Shank to 3/8” Socket Adapter 48-32-5031
1/4” Hex Shank to 1/2” Socket Adapter 48-32-5032
HEX SIZE
Red
Amber
Blue
Brown
COLOUR ID BAND
1/4” 5/16” 3/2” 7/16”
Colour Coded
ID Bands
Makes Sizes Easy to Identify
45% Chamfered Edge
For a Better Fit & Reduced Rounding
* Colour coded to ASME standard
Taper-Fit
Connection
Impact duty
& less run-out
n
ThunderBolt® Web
- Thicker Web Than a Standard
Drill Bit
- Less Breakage = Longer Life
- Unique Spiral Design & Parabolic
Flute Clears Chips Faster
135° Split Point
Penetrates Quickly & Requires
No Effort
ShockwaveTM Impact Duty Hex Adapters
40
ACCESSORIES
www.MILWAUKEETOOL.COM
STEP DRILL BITS
1/8”- 1/2” 48-89-9100 3-Flat 13 1/8” 1/2” 1/32”
1/4”- 3/4” 48-89-9105 3-Flat 9 1/4” 3/4” 1/16”
1/4” - 1 3/8” 48-89-8960 3-Flat 10 1/4” 1-3/8” 1/8”
3/16”- 1/2” 48-89-8955 3-Flat 6 3/16” 1/2” 1/16”
3/16” - 7/8” 48-89-9130 3-Flat 12 3/16” 7/8” 1/16”
1/4”- 7/8” 48-89-9115 3-Flat SINGLE HOLE 7/8” - -
1/4”-7/8”-1-1/8” 48-89-9135 3-Flat 2 HOLE 7/8” 1-1/8” -
2PC STEP DRILL SET 48-89-9050 3-Flat 48-89-9100 & 48-89-9105
3PC STEP DRILL SET 48-89-8990 3-Flat 48-89-8955, 48-89-9100 & 48-89-9105
ITEM NO. NUMBER MIN MAX STEP
DESCRIPTION 1 PACK SHANK OF HOLES HOLE SIZE HOLE SIZE INCREMENTS
ITEM NO.
DESCRIPTION 1 PACK SHANK INCLUDES
9/16” - 1” 48-89-9110 3-Flat 8 9/16” 1” 1/16”
3/16” - 1-3/8” 48-89-8965 3-Flat 10 13/16” 1-3/8” 1/16”
ITEM NO. NUMBER MIN MAX STEP
DESCRIPTION 1 PACK SHANK OF HOLES HOLE SIZE HOLE SIZE INCREMENTS
Step Drill Bits - Hole Enlarging
Step Drill Bit Sets
Laser
Etched
Markings
For Visibility to
Hole Sizes Without
the Guesswork
Laser Etched Markings
For Visibility to Hole Sizes Without
the Guesswork
3 Flat
Shank
Prevents Bit from
Slipping in Chuck
3 Flat
Shank
Prevents Bit from
Slipping in Chuck
Single
Cutting Edge
Provides True,
Rounded Holes
Single
Cutting
Edge
Provides True,
Rounded Holes
Speed
Start Tip
Starts Fast &
Reduces Bit
Walking
Black
Oxide
Finish
Resists
Corrosion
Black
Oxide
Finish
Resists
Corrosion
DESIGNED FOR DRILLING IN MOST METALS, WITH MORE CONTROL & A CLEANER FINISH.
Ideal for Mild Steel, Stainless Steel, Aluminum, Brass, Copper & Plastic.
41
ACCESSORIES
www.MILWAUKEETOOL.COM
HAMMER DRILL BITS
DESIGNED FOR DRILLING IN BRICK, BLOCK AND SOFTER AGGREGATE CONCRETE.
1/8” 1-1/2” 3” 48-20-8800* - 48-20-8900 25
5/32” 4” 6” 48-20-8801* - 48-20-8901 25
3/16” 2” 4” 48-20-8805* - 48-20-8905 25
3/16” 4” 6” 48-20-8806* 48-20-8957 48-20-8906 25
1/4” 2” 4” 48-20-8810 48-20-8961 48-20-8910 25
1/4” 4” 6” 48-20-8811 48-20-8962 48-20-8911 25
1/4” 10” 12” 48-20-8812 - - -
5/16” 4” 6” 48-20-8816 - 48-20-8916 25
5/16” 10” 12” 48-20-8817 - - -
3/8” 4” 6” 48-20-8821 - 48-20-8921 20
3/8” 10” 12” 48-20-8822 - - -
3/8” 16” 18” 48-20-8823 - - -
7/16” 4” 6” 48-20-8825 - 48-20-8925 20
1/2” 4” 6” 48-20-8830 - 48-20-8930 15
1/2” 10” 12” 48-20-8831 - - -
1/2” 16” 18” 48-20-8832 - - -
9/16” 4” 6” 48-20-8835 - - -
5/8” 4” 6” 48-20-8840 - 48-20-8940 10
5/8” 10” 12” 48-20-8841 - - -
5/8” 16” 18” 48-20-8842 - - -
3/4” 4” 6” 48-20-8845 - - -
3/4” 10” 12” 48-20-8846 - - -
7/8” 4” 6” 48-20-8847 - - -
7/8” 10” 12” 48-20-8848 - - -
1” 4” 6” 48-20-8849 - - -
1” 10” 12” 48-20-8854 - - -
* 2pc per pack
3 PC SET 5/32”, 3/16”, 1/4” 48-20-8850
5 PC SET 5/32”, 3/16”, 1/4”, 5/16”, 3/8” 48-20-8851
7 PC SET 5/32”, 2 of 3/16”, 2 of 1/4”, 5/16”, 3/8” 48-20-8852
6 PC SET 1/4”, 1/4”, 5/32”, 3/16”, 5/16”, 3/8” 48-20-8856
DRILLING OVERALL
ITEM NO. ITEM NO. ITEM NO. BULK
DIAMETER LENGTH LENGTH 1 PACK 5 PACK BULK PACK PACK QTY
DESCRIPTION INCLUDES ITEM NO.
Hammer Drill Bits
Hammer Drill Bit Sets - 6” Lengths
Self Centering
Carbide Tip
For Greater Accuracy
& Reduced Walking
Reinforced
Flute Geometry
Maximizes Energy Transfer
& Debris Removal, for
Faster Drilling & Longer
Bit Life
3 Flat Shank
Minimizes Spinning
in the Chuck
42
ACCESSORIES
www.MILWAUKEETOOL.COM
CARBIDE SDS+ BITS
5/32” 2” 4” 48-20-7400 48-20-7500 25 - -
5/32” 4” 6” 48-20-7401 48-20-7501 25 - -
3/16” 2” 4” 48-20-7410 48-20-7510 25 48-20-7810 200
3/16” 4” 6” 48-20-7411 48-20-7511 25 48-20-7811 200
3/16” 6” 8” 48-20-7412 48-20-7512 25 - -
3/16” 8” 10” 48-20-7413 48-20-7513 25 - -
3/16” 10” 12” 48-20-7414 48-20-7514 25 - -
3/16” 12” 14” 48-20-7415 48-20-7515 25 - -
3/16” 14” 16” 48-20-7416 48-20-7516 25 - -
7/32” 4” 6” 48-20-7421 48-20-7521 25 - -
7/32” 6” 8” 48-20-7422 48-20-7522 25 - -
7/32” 9” 11” 48-20-7424 48-20-7524 25 - -
7/32” 12” 14” 48-20-7425 48-20-7525 25 - -
7/32” 14” 16” 48-20-7426 48-20-7526 25 - -
1/4” 2” 4” 48-20-7430 48-20-7530 25 48-20-7830 200
1/4” 4” 6” 48-20-7431 48-20-7531 25 48-20-7831 200
1/4” 6” 8” 48-20-7432 48-20-7532 25 - -
1/4” 9” 11” 48-20-7434 48-20-7534 25 - -
1/4” 12” 14” 48-20-7435 48-20-7535 25 - -
1/4” 14” 16” 48-20-7436 48-20-7536 25 - -
1/4” 18” 20” 48-20-7438 - - - -
5/16” 4” 6” 48-20-7441 48-20-7541 25 48-20-7841 150
5/16” 10” 12” 48-20-7444 - - - -
3/8” 4” 6” 48-20-7451 48-20-7551 20 48-20-7851 125
3/8” 6” 8” 48-20-7452 - - - -
3/8” 8” 10” 48-20-7453 - - - -
3/8” 10” 12” 48-20-7454 48-20-7554 20 - -
3/8” 16” 18” 48-20-7457 - - - -
3/8” 22” 24” 48-20-7459 - - - -
7/16” 4” 6” 48-20-7461 - - - -
7/16” 10” 12” 48-20-7464 - - - -
7/16” 16” 18” 48-20-7467 - - - -
1/2” 4” 6” 48-20-7471 48-20-7571 15 48-20-7871 100
DRILLING OVERALL
ITEM NO. ITEM NO. BULK ITEM NO. MONSTER
DIAMETER LENGTH LENGTH 1 PACK BULK PACK PACK QTY MONSTER PACK PACK QTY
Centering Point
Allows for More Accurate
Starting of Holes
Four Fluted
Spiral Geometry
Maximizes Energy Transfer to the
Tip for Faster Drilling & Improves
Debris Removal
DRILLING OVERALL ITEM NO. ITEM NO. BULK
DIAMETER LENGTH LENGTH 1 PACK BULK PACK PACK QTY
1/2” 8” 10” 48-20-7473 - -
1/2” 10” 12” 48-20-7474 48-20-7574 15
1/2” 16” 18” 48-20-7477 - -
1/2” 22” 24” 48-20-7479 - -
9/16” 4” 6” 48-20-7481 - -
9/16” 10” 12” 48-20-7484 - -
DRILLING OVERALL
ITEM NO. ITEM NO. BULK
DIAMETER LENGTH LENGTH 1 PACK BULK PACK PACK QTY
9/16” 16” 18” 48-20-7487 - -
5/8” 4” 6” 48-20-7601 - -
5/8” 6” 8” 48-20-7602 48-20-7702 10
5/8” 10” 12” 48-20-7604 - -
5/8” 16” 18” 48-20-7607 - -
5/8” 22” 24” 48-20-7609 - -
Chisel
Shaped
2-Cutter
Carbide Tip
Efficiently Breaks
Concrete for Faster
Penetration
43
ACCESSORIES
www.MILWAUKEETOOL.COM
NEW! MX4 PREMIUM TIP SDS+ BITS
DESIGNED TO OFFER MORE ACCURATE HOLE DIMENSIONS FOR IMPROVED
ANCHOR ENGAGEMENT.
3/16” 2” 4” 48-20-7310 - -
3/16” 4” 6” 48-20-7311 48-20-7911 15
3/16” 6” 8” 48-20-7312 - -
3/16” 8” 10” 48-20-7313 - -
3/16” 10” 12” 48-20-7314 - -
1/4” 2” 4” 48-20-7330 - -
1/4” 4” 6” 48-20-7331 48-20-7931 15
1/4” 6” 8” 48-20-7332 - -
1/4” 8” 10” 48-20-7334 - -
1/4” 10” 12” 48-20-7335 - -
5/16” 4” 6” 48-20-7341 - -
3/8” 4” 6” 48-20-7351 48-20-7951 10
3/8” 10” 12” 48-20-7354 - -
3/8” 16” 18” 48-20-7357 - -
1/2” 4” 6” 48-20-7371 48-20-7971 10
1/2” 10” 12” 48-20-7374 - -
1/2” 16” 18” 48-20-7377 - -
DRILLING OVERALL
ITEM NO. ITEM NO. BULK
DIAMETER LENGTH LENGTH 1 PACK BULK PACK PACK QTY
Maximum Interface
Between Carbide & Steel
Provides Durability Against Unintended
Rebar Impacts
4-Cutter Solid
Carbide Tip with
4x90° Alignment
Offers More Accurate Hole
Dimensions & Won’t Lock Up
in Rebar
Centering Point
Allows for More Accurate Hole
Placement & Minimizes Slipping
WHEN DRILLING REINFORCED CONCRETE
3XLonger Life
UP TO
5 PC. SET 3/16”,1/4”, 5/16”, 3/8”, 1/2” 48-20-7490
6 PC SET 2 of 3/16”, 2 of 1/4”, 3/8”, 1/2” 48-20-7495
DESCRIPTION INCLUDES ITEM NO.
SDS Sets
CARBIDE SDS+ BITS - Con’t
44
ACCESSORIES
www.MILWAUKEETOOL.COM
STANDARD SDS+ BITS
5/8” 6” 8” 48-20-7200
5/8” 10” 12” 48-20-7203
5/8” 16” 18” 48-20-7206
3/4” 6” 8” 48-20-7210
3/4” 10” 12” 48-20-7215
3/4” 16” 18” 48-20-7220
7/8” 6” 8” 48-20-7225
7/8” 8” 10” 48-20-7230
7/8” 16” 18” 48-20-7236
1” 8” 10” 48-20-7240
1” 16” 18” 48-20-7246
1-1/8” 8” 10” 48-20-7250
1-1/8” 16” 18” 48-20-7256
11/16” 6” 8” 48-20-7058 - -
3/4” 6” 8” 48-20-7061 - -
3/4” 8” 10” 48-20-7063 - -
3/4” 10” 12” 48-20-7065 - -
3/4” 16” 18” 48-20-7066 - -
3/4” 22” 24” 48-20-7067 - -
13/16” 6” 8” 48-20-7068 - -
27/32” 6” 8” 48-20-7069 - -
7/8” 6” 8” 48-20-7071 - -
7/8” 10” 12” 48-20-7072 - -
7/8” 16” 18” 48-20-7075 - -
1” 8” 10” 48-20-7080 - -
1” 16” 18” 48-20-7085 - -
DRILLING OVERALL
ITEM NO. ITEM NO. BULK
DIAMETER LENGTH LENGTH 1 PACK BULK PACK PACK QTY
DRILLING OVERALL
ITEM NO.
DIAMETER LENGTH LENGTH 1 PACK
DRILLING OVERALL ITEM NO.
DIAMETER LENGTH LENGTH 1 PACK
Standard SDS+ Bits - 2 Cutter
5/32” 2” 5” 48-20-7090 - -
5/32” 3” 6” 48-20-7096 48-20-7196 25
5/32” 4” 7” 48-20-7091 48-20-7191 25
3/16” 2” 5” 48-20-7097 -
3/16” 3” 6” 48-20-7098 48-20-7198 25
3/16” 4” 7” 48-20-7092 48-20-7192 25
DRILLING OVERALL
ITEM NO. ITEM NO. BULK
DIAMETER LENGTH LENGTH 1 PACK BULK PACK PACK QTY
Standard SDS+ Bits with 1/4” Hex Shoulder
Standard SDS+ Bits - 4 Cutter
2-Cutter
Carbide Tip
Efficiently Breaks
Concrete for Faster
Penetration
Centering
Point
Allows for More
Accurate Starting
of Holes
Flute
Geometry
for Fast Debris
Removal
4 Cutter
Head Design
for Increased Drilling
Speeds & Rounder Holes
1/4” Hex Shoulder for Tap-Con® Applications
Flute
Geometry
High Volume Flute
Entrance Quickly Channels
Debris to the Flute for Fast Removal
45
ACCESSORIES
www.MILWAUKEETOOL.COM
SPLINE BITS
3/8” 4” 10” 48-20-4037
1/2” 4” 10” 48-20-4050
1/2” 10” 16” 48-20-4051
1/2” 16” 22” 48-20-4052
1/2” 22” 27” 48-20-4053
1/2” 31” 36” 48-20-4054
9/16” 4” 10” 48-20-4056
9/16” 18” 23” 48-20-4057
5/8” 4” 10” 48-20-4062
5/8” 10” 16” 48-20-4063
5/8” 16” 22” 48-20-4064
11/16” 10” 16” 48-20-4068
3/4” 4” 10” 48-20-4075
3/4” 10” 16” 48-20-4076
3/4” 16” 22” 48-20-4078
13/16” 10” 16” 48-20-4081
7/8” 10” 16” 48-20-4087
7/8” 16” 22” 48-20-4088
1” 10” 16” 48-20-4100
1” 16” 22” 48-20-4101
1-1/8” 10” 16” 48-20-4112
1-1/8” 16” 22” 48-20-4113
1-1/4” 10” 16” 48-20-4125
1-1/4” 16” 22” 48-20-4126
1-3/8” 10” 16” 48-20-4137
1-3/8” 16” 22” 48-20-4138
1-1/2” 10” 16” 48-20-4150
1-1/2” 16” 22” 48-20-4151
BIT & CHISEL ASSORTMENT* 48-20-4200
DRILLING OVERALL
ITEM NO.
DIAMETER LENGTH LENGTH 1 PACK
DRILLING OVERALL
ITEM NO.
DIAMETER LENGTH LENGTH 1 PACK
Spline Bits - 2 Cutter
* Bit & Chisel assortment includes one of each: 48-20-4051 + 48-20-4063 + 48-20-4076 + 48-62-2000 + 48-62-2020
SDS MAX BITS
1/2” 8” 13” 48-20-3902*
1/2” 16” 21” 48-20-3904*
9/16” 8” 13” 48-20-3910*
9/16” 16” 21” 48-20-3912*
5/8” 8” 13” 48-20-3916
5/8” 16” 21” 48-20-3918
5/8” 31” 36” 48-20-3922
11/16” 16” 21” 48-20-3926
3/4” 8” 13” 48-20-3930
3/4” 16” 21” 48-20-3932
3/4” 31” 36” 48-20-3936
13/16” 16” 21” 48-20-3938
7/8” 8” 13” 48-20-3944
7/8” 16” 21” 48-20-3946
1” 8” 13” 48-20-3952
1” 16” 21” 48-20-3954
1” 31” 36” 48-20-3956
1-1/16” 18” 23” 48-20-3958
1-1/8” 12” 17” 48-20-3964
1-1/8” 16” 21” 48-20-3966
1-3/16” 18” 23” 48-20-3968
1-1/4” 10” 15” 48-20-3970
1-1/4” 18” 23” 48-20-3972
1-1/4” 31” 36” 48-20-3974
1-3/8” 18” 23” 48-20-3980
1-7/16” 18” 23” 48-20-3984
1-1/2” 18” 23” 48-20-3988
1-9/16” 18” 23” 48-20-3990
1-5/8” 18” 23” 48-20-3991
1-3/4” 18” 23” 48-20-3992
2” 18” 23” 48-20-3993
DRILLING OVERALL
ITEM NO.
DIAMETER LENGTH LENGTH 1 PACK
DRILLING OVERALL
ITEM NO.
DIAMETER LENGTH LENGTH 1 PACK
* 2 Cutter, all Other SDS MAX Bits are 4 Cutters
Short Dust Entrance
for Extra Fast Debris Removal
4-Cutter
Tip w/4x90°
Alignment
- Available in 5/8”
Diameter & Up
- Increased Drilling
Speeds & Rounder
Holes
- Minimizes Bit Locking
Up in Reinforcement
Centering Point
Allows for More Accurate
Starting of Holes
Flute Geometry
- Optimizes Hammer Energy Transfer for Less
Strenuous Drilling
- Optimizes Dust Removal When
Working Vertically
46
ACCESSORIES
www.MILWAUKEETOOL.COM
THIN WALL CORE BITS
DESIGNED FOR LARGE CONCRETE HOLE DRILLING WHERE DEPTH IS RELATIVELY SHALLOW.
Ideal for Smaller Hammers & Newer Concrete*.
5/8” 5” 10” 48-20-4300
5/8” 11” 16” 48-20-4305
5/8” 16” 21” 48-20-4310
5/8” 22” 27” 48-20-4315
5/8” 31” 36” 48-20-4320
11/16” 11” 16” 48-20-4325
3/4” 6” 11” 48-20-4330
3/4” 11” 16” 48-20-4335
3/4” 17” 22” 48-20-4340
3/4” 22” 27” 48-20-4345
3/4” 31” 36” 48-20-4350
7/8” 11” 16” 48-20-4360
7/8” 17” 22” 48-20-4365
1” 11” 16” 48-20-4370
1” 17” 22” 48-20-4375
1” 31” 36” 48-20-4380
1-1/8” 11” 16” 48-20-4385
1-1/8” 17” 22” 48-20-4390
1-1/4” 11” 16” 48-20-4395
1-1/4” 17” 22” 48-20-4400
1-1/4” 31” 36” 48-20-4405
1-3/8” 17” 22” 48-20-4410
1-1/2” 17” 22” 48-20-4415
1-3/4” 18” 23” 48-20-4418
2” 18” 23” 48-20-4419
DRILLING OVERALL
ITEM NO.
DIAMETER LENGTH LENGTH 1 PACK
DRILLING OVERALL
ITEM NO.
DIAMETER LENGTH LENGTH 1 PACK
Spline Bits - 4 Cutter
1” 3-3/16” 48-20-5005** 48-03-3545 48-03-3551 - - 48-95-6070 - -
1-1/8” 3-3/16” 48-20-5010** - - - -
1-1/4” 3-3/16” 48-20-5015 - - 48-20-6150 48 -20-6151
1-3/8” 3-3/16” 48-20-5020 - - 48 -20-6152
1-1/2” 3-3/16” 48-20-5025 - - 48 -20-6153
1-3/4” 2-13/16” 48-20-5030 48-03-3555 48-03-3561 - - 48-95-6075 48-20-6155 48-20-6156
2” 2-13/16” 48-20-5035 - - 48-20-6157
2-1/2” 2-13/16” 48-20-5040 - - 48-20-6158
3” 2-13/16” 48-20-5045 - - 48-20-6159
3-1/2” 2-13/16” 48-20-5050 - - 48-20-6160
4” 2-13/16” 48-20-5055 - - 48-20-6161
5” 2-13/16” 48-20-5060 - - 48-03-3574 48-03-3540 48-20-6162
6” 2-13/16” 48-20-5065 - - 48-20-6163
DIAMETER DRILLING CORE BODY 8” SDS+ 12” SDS+ 12” SDS MAX 12” SPLINE 7-1/2” REPLACEMENT REPLACEMENT
DEPTH W/GUIDE PLATE ADAPTER ADAPTER ADAPTER ADAPTER EXTENSION CENTERING PIN GUIDE
& CENTERING
* Thin wall core bits 4” and less should only be used in SDS hammers. 5” and 6” core bits are to be used with SDS MAX & Spline Hammers.
** Guide plate and centering pin not included with 1” & 1-1/8” diameter core bits.
SPLINE BITS - Con’t
Adapter
SDS+
SDS MAX
or Spline
7-1/2” Extension Centering Pin
Core Body
Flute Geometry
- Optimizes Hammer Energy Transfer for Less
Strenuous Drilling
- Optimizes Dust Removal When
Working Vertically
Short Dust Entrance
for Extra Fast Debris Removal
Centering Point
Allows for More Accurate
Starting of Holes
4-Cutter
Tip w/4x90°
Alignment
- for Increased
Drilling Speeds
& Rounder Holes
- Minimizes Bit Locking
Up in Reinforcement
47
ACCESSORIES
www.MILWAUKEETOOL.COM
1-1/2” 48-20-5090 48-20-5077 48-20-5075 48-20-5079 48-20-5081 48-20-5099
1-3/4” 48-20-5091
2-1/8” 48-20-5092
2-5/8” 48-20-5093
3-1/8” 48-20-5094
3-1/2” 48-20-5095
4” 48-20-5096
5” 48-20-5097
1-3/8” 48-20-5082 -
1-1/2” 48-20-5083 -
1-3/4” 48-20-5084 -
2-1/8” 48-20-5085 -
2-5/8” 48-20-5087 -
3-1/8” 48-20-5089 -
1-1/8” 48-20-5070 -
1-1/4” 48-20-5071 -
* LHS system should only be used in rotary hammers with a solid bit capacity of up to 1-3/4”.
** Threaded replacement stud included.
DIAMETER DESCRIPTION CORE BODY 7-1/2” SDS 7” SPLINE 11” EXTENSION REPLACEMENT REPLACEMENT
W/GUIDE PLATE MAX ADAPTER ADAPTER W/THREADED STUD THREADED STUD CENTERING PIN
& CENTERING
LHS COMPONENT SYSTEMS (Large Hole System)
DESIGNED FOR MAXIMUM VERSATILITY IN DEEP & LARGE CONCRETE HOLE DRILLING.
THICK WALL CORE BITS
DESIGNED FOR LARGE CONCRETE HOLE DRILLING WHERE DEPTH IS RELATIVELY SHALLOW.
Ideal for Larger Hammers & More Seasoned/Cured Concrete*.
1-1/2” 4-1/6” 48-20-5125 48-03-3572 48-03-3573 48-03-3564 48-95-3565 48-95-6085 48-20-5199 48-20-5168
1-3/4” 4-1/6” 48-20-5130 48-20-5169
2” 4-1/6” 48-20-5135 48-20-5170
2-1/2” 4-1/6” 48-20-5140 48-20-5171
3” 4-1/6” 48-20-5145 48-20-5172
3-1/2” 4-1/6” 48-20-5150 48-20-5173
4” 4-1/6” 48-20-5155 48-20-5174
5” 4-1/6” 48-20-5160 48-20-5175
6” 4-1/6” 48-20-5165 48-20-5176
DIAMETER DRILLING CORE BODY 12” SDS MAX 18” SDS MAX 12” SPLINE 18” SPLINE 7-1/2” REPLACEMENT REPLACEMENT
DEPTH W/GUIDE PLATE ADAPTER ADAPTER ADAPTER ADAPTER EXTENSION CENTERING PIN GUIDE
& CENTERING
TURBO
TUNNEL
BITS**
Core
Body
11” Extension
SDS MAX
Spline
Turbo
Tunnel
4-Cutter Bit
Adapter
SDS MAX
or Spline
7-1/2” Extension Centering Pin
Core Body
3”
DEPTH
CORE
BODY
4-CUTTER
FLUTED
BITS**
48
ACCESSORIES
www.MILWAUKEETOOL.COM
BULL POINT 12” 48-62-4075 48-62-4175 25 Starts holes in concrete slabs, general chipping & breaking
BULL POINT 18” 48-62-4077 48-62-4177 25 Starts holes in concrete slabs, general chipping & breaking
FLAT CHISEL 1” x 12” 48-62-4079 48-62-4179 25 General chipping & breaking work
FLAT CHISEL 1” x 18” 48-62-4081 48-62-4181 25 General chipping & breaking work
SCALING CHISEL 1-1/2” x 12” 48-62-4082 - - Two 60° cutting angles cleans concrete, scale & rust, cuts troughs & some asphalt
SCALING CHISEL 2” x 12” 48-62-4085 48-62-4185 25 Two 60° cutting angles cleans concrete, scale & rust, cuts troughs & some asphalt
SCALING CHISEL 3” x 12” 48-62-4087 48-62-4187 25 Two 60° cutting angles cleans concrete, scale & rust, cuts troughs & some asphalt
SCRAPING CHISEL 2” x 12” 48-62-4089 - - 45° cutting angle, scrapes surface rather than breaking material on top
SLOTTING TOOL 1-1/4” x 15” 48-62-4073 - - Breaks out the “web” between closely spaced drilled holes to make a large opening
SEAM TOOL 1” x 15” 48-62-4080 - - Removes mortar between brick or block; cut narrow channels
BUSHING TOOL - 1 PC 16 Tooth Head, 48-62-4065 - - Removes excess concrete, produces exterior finish, roughens surface
1-3/4” Square x 10-1/2” before its surface coated
ASPHALT CUTTER 5” x 16-1/2” 48-62-4066 - - Cuts asphalt or hard ground (do NOT use for concrete)
CLAY SPADE 4-1/2” x 16-5/8” 48-62-4068 48-62-4168 12 Digging clay, hard packed gravel (do NOT use for concrete)
GROUND ROD DRIVER 9-3/4” Long for Rod 48-62-4091 - - Drives soft ground rods. Inside diameter is .906” and 2-3/4” deep socket
Diameter 5/8” & 3/4”
TAMPER PLATE SHANK 12” 48-62-4092 - - Used to mount Tamper Plate to tool
TAMPER PLATE 5” x 5” 48-62-3060 - - Compacts dirt, tamping asphalt
OVERALL
ITEM NO. ITEM NO. BULK
DESCRIPTION LENGTH 1 PACK BULK PACK PACK QTY APPLICATION
SDS MAX Hammer Steel
Demolition Hammer Accessories
MOLL POINT 20” 48-62-4000 48-62-4100 8 Starts holes in concrete slabs, general chipping & breaking
NARROW CHISEL 20.5” 48-62-4005 48-62-4105 8 General chipping & breaking work
3” CHISEL 20.5” 48-62-4010 48-62-4110 8 Used for removing weld splatter, scale & concrete from overflow & seepage
5” ASPHALT CUTTER 17.5” 48-62-4020 48-62-4120 6 Cuts asphalt or hard ground (do NOT use for concrete)
5-1/2” CLAY SPADE 20” 48-62-4030 48-62-4130 5 Digs clay, hard packed gravel, dirt (do NOT use for concrete)
GROUND ROD DRIVER 15.5” / 3” Deep 48-62-4045 - - Drives ground rods
SPIKE/PIN DRIVER 14.5” 48-62-4040 - - Drives anchoring pins for concrete forms
TAMPER SHANK 15.5” 48-62-4060 - - For use with 48-62-4050, 48-62-4055, 48-62-4061.
TAMPER PLATE 6” x 6” 48-62-4050 - - Compacts dirt, tamps asphalt. Use with 48-62-4060 Shank
TAMPER PLATE 8” x 8” 48-62-4055 - - Compacts dirt, tamps asphalt. Use with 48-62-4060 Shank
TENT STAKE DRIVER 5.5” L/3.5” OD/2.75” ID 48-62-4061 - - Used to drive in large tent stakes. Use with 48-62-4060 Shank
* 1-1/8” collared hex shank with notch. Use with breakers having 1-1/8” hex holders. All shanks have internal lock recess.
OVERALL
ITEM NO. ITEM NO. BULK
DESCRIPTION LENGTH 1 PACK BULK PACK PACK QTY APPLICATION
DEMOLITION STEEL
*
49
ACCESSORIES
www.MILWAUKEETOOL.COM
BULL POINT 12” 48-62-3000 - - Starts holes in concrete slabs, general chipping & breaking
BULL POINT 18” 48-62-3005 - - Starts holes in concrete slabs, general chipping & breaking
FLAT CHISEL 1” x 12” 48-62-3010 48-62-3110 25 General chipping & breaking work
FLAT CHISEL 1” x 18” 48-62-3015 - - General chipping & breaking work
SCALING CHISEL 1-1/2” x 12” 48-62-3020 - - Two 60° cutting angles cleans concrete, scale & rust, cuts troughs & some asphalt
SCALING CHISEL 2” x 12” 48-62-3035 - - Two 60° cutting angles cleans concrete, scale & rust, cuts troughs & some asphalt
SCALING CHISEL 3” x 12” 48-62-3030 48-62-3130 25 Two 60° cutting angles cleans concrete, scale & rust, cuts troughs & some asphalt
SCRAPING CHISEL 2” x 12” 48-62-3025 - - 45° cutting angle, scrapes surface rather than breaking material on top
BUSHING TOOL - 1 PC 16 Tooth Head, 48-62-3085 48-62-3185 15 Removes excess concrete, produces exterior finish, roughens surface before
1-3/4” Square x 9-3/4” its surface coated
ASPHALT CUTTER 5” x 16-1/2” 48-62-3090 - - Cuts asphalt or hard ground (do NOT use for concrete)
CLAY SPADE 4-1/2” x 16-3/4” 48-62-3040 48-62-3140 12 Digging clay, hard packed gravel (do NOT use for concrete)
GROUND ROD DRIVER 9-3/4” Long for 5/8” 48-62-3070 - - Drives soft ground rods. Inside diameter is .906” and 2-3/4” deep socket
& 3/4” Rod Diameter
TAMPER PLATE SHANK 12” 48-62-3065 - - Used to mount Tamper Plate to tool
TAMPER PLATE 5” x 5” 48-62-3060 - - Compacts dirt, tamping asphalt
* 3/4” Hex shank
OVERALL
ITEM NO. ITEM NO. BULK
DESCRIPTION LENGTH 1 PACK BULK PACK PACK QTY APPLICATION
3/4” Hex Hammer Steel
BULL POINT 12” 48-62-2000 48-62-2100 25 Starts holes in concrete slabs, general chipping & breaking
BULL POINT 18” 48-62-2010 48-62-2110 25 Starts holes in concrete slabs, general chipping & breaking
FLAT CHISEL 1” x 12” 48-62-2020 48-62-2120 25 General chipping & breaking work
FLAT CHISEL 1” x 18” 48-62-2030 48-62-2130 25 General chipping & breaking work
SCALING CHISEL 1-1/2” x 12” 48-62-2040 - - Two 60° cutting angles cleans concrete, scale & rust, cuts troughs & some asphalt
SCALING CHISEL 2” x 12” 48-62-2050 48-62-2150 25 Two 60° cutting angles cleans concrete, scale & rust, cuts troughs & some asphalt
SCALING CHISEL 3” x 12” 48-62-2055 48-62-2155 25 Two 60° cutting angles cleans concrete, scale & rust, cuts troughs & some asphalt
SCRAPING CHISEL 2” x 12” 48-62-2065 - - 45° cutting angle, scrapes surface rather than breaking material on top
SLOTTING TOOL 1-1/2” x 12” 48-62-2060 - - Breaks out the “web” between closely spaced drilled holes to make a large opening
SEAM TOOL 1” x 15” 48-62-2080 - - Removes mortar between brick or block; cut narrow channels
BUSHING TOOL - 1 PC 16 Tooth Head, 48-62-2070 48-62-2170 15 Removes excess concrete, produces exterior finish, roughens surface
1-3/4” Square x 9-3/4” before its surface coated
CLAY SPADE 4-1/2” x 16-3/4” 48-62-2095 - - Digging clay, hard packed gravel (do NOT use for concrete)
GROUND ROD DRIVER 10” Long for Rod 48-62-2046 - - Drives soft ground rods. Inside diameter is .906” and 2-3/4” deep socket
Diameter 5/8” & 3/4”
TAMPER PLATE SHANK 12” 48-62-2097 - - Used to mount Tamper Plate to tool
TAMPER PLATE 5” x 5” 48-62-3060 - - Compacts dirt, tamping asphalt
* 3/4” Hex with 21/32” round
OVERALL
ITEM NO. ITEM NO. BULK
DESCRIPTION LENGTH 1 PACK BULK PACK PACK QTY APPLICATION
Spline or Round/Hex Hammer Steel*
*
DEMOLITION STEEL - Con’t
50
AUTHORIZED SERVICE CENTRES
Complete Power Tool Services Alison, Annice Bay 9, 7139 - 40th Street S.E. Calgary, AB T2C 2H7 403-720-0445 403-720-0446
Industrial Power Tool Sue #8 - 4115 - 64 Avenue S.E. Calgary, AB T2C 2C8 403-261-0780 403-261-0781
Power Tool Klinic Ltd. Tracy 2520 - 23rd Street N.E., Bay #6 Calgary, AB T2E 8L2 403-276-4633 403-276-4633
Celtic Industrial Tools & Repair Ltd. Jody 5736 - 103A Street Edmonton, AB T6H 2J5 780-431-0970 780-431-0977 www.celticindustrial.com
Comax Tools Cory, Allie 5224 - 99 Street Edmonton, AB T6E 3N7 780-433-6600 780-463-7594 www.comaxtools.com
Quality Tool Repair Ltd. Ben, Hans 11420 - 156 Street Edmonton, AB T5M 3N2 780-702-1686 780-702-1689
K.A.M. Industries Harold, Mike 420B MacAlpine Cres. Fort McMurray, AB T9H 4B1 780-715-4044 780-715-4024
Bermar Rewind Ldt. Chuck 9609 - 109 Street Grand Prairie, AB T8V 4E3 403-532-0818 780-539-6443
Hagen Electric Ltd. Joan 1202 - 2nd Avenue S. Lethbridge, AB T1J 0E3 403-328-8826 403-328-8600
Zark Repair Wayne 541A N. Railway St. S.E. Medicine Hat, AB T1A 2Z5 403-526-6131 403-526-2224
McAuley’s Electric Motors Ltd. (Name Change) Rick Bay #3 7884 49TH AVE Red Deer, AB T4N 4C9 403-358-7790 403-358-7793
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
ALBERTA
Harold’s Electric Service Earl 3 60 Pacific Ave. Brandon, MB R7A 0H5 204-727-7292 204-727-7292
Accutool Service Centre Blair, Rick 565 Marjorie St. Winnipeg, MB R3H 0S8 204-772-6523 204-775-6142 www.accutool.ca
Athena Small Equipment Repair Gwen 1125 Empress Street Winnipeg, MB R3E 3H1 204-786-1900 204-775-6929
Wolseley Mechanical Group Chido 1300 St. Matthews Ave. Winnipeg, MB R3G 3K4 204-786-7861 204-786-7861
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
MANITOBA
Steve’s Electric Motor Service Ltd. Steve 605 Bridge Street Bathurst, NB E2A 1W9 506-548-4681 506-548-9594
Audiotek Tool Division Emile 464 rue Victoria Edmundston, NB E3V 2K5 506-735-5284 506-735-8020 www.audiotek.ca
Electric Motor Service Co. Dale Scott 129 Westmoreland St. Fredericton, NB E3B 2L4 506-458-8770 506-458-8771
St. Onge Ind. Supplies Ltd. Mark 25 rue Belanger Grand Falls, NB E3Z 3C9 506-473-4633 506-473-4634
Power Plus Tool Repair Randy 57 Millennium Blvd. Moncton, NB E1E 2G7 506-855-8665 506-388-4377
Harbour City Electro-Mechanical Ltd. Robert Jones 38 Bayside Dr. Box 610 Saint John, NB E2L 4A4 506-634-8314 506-634-8314
Richard’s Service Central Ltd. Karen 218 Waterloo St. Saint John, NB E2L 3R1 506-652-4410 506-634-7041
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
NEW BRUNSWICK
RPM Tool Repair Joe 1582 Ogilvie St. S Prince George, BC V2N 1W9 250-563-3031 250-563-3032
Westcoast Tool Sales & Services Rob Hibbert 4008 Myrtle Street Burnaby, BC V5C 4G2 604-873-5394 604-873-5394 www.westcoast-tool.com
KMS Tool Repair Larry, Jen 931 Tupper Avenue Coquitlam, BC V3K 1A4 604-522-5599 604-522-4017 www.kmstools.com
SARC Repair 2005 Lorne/Darlene 550 Laurier St W Cranbrook, BC V1C 6T4 250-426-6333 250-426-6333
Thompson Valley Rewind Ltd. Karen 1647 Valleyview Dr. Kamloops, BC V2C 4B6 250-374-1633
K.Y. Tools Sales & Services Ken 1 - 1115 Gordon Dr. Kelowna, BC V1Y 3E3 250-862-2575 250-862-9102
Power Tool Clinic Ltd. Greg 105 - 19835 56th Avenue Langley, BC V3A 3X8 604-530-3550 604-530-0899 www.powertoolclinic.ca
H.Q.T. Repair Ltd. Gordon Gee 22935 Lougheed Hwy., Unit 1 Maple Ridge, BC V2X 2W4 604-463-7455 604-463-7494
Solar Electric Repairs (1981) Ltd. Dave 20A Cliff Street Nanaimo, BC V9R 5E5 250-753-1731
Starlight Tool Services Walter 4655 Crescent Rd. Nelson, BC V1L 6N3 250-825-3428
A.C. Motor Electric Ltd. Frank 259 Okanagan Ave. E. Penticton, BC V2A 3J8 250-493-1440 250-493-4531 www.acmotorelectric.com
Economy Rentals & Repairs Ltd John/Bill 4500 Manson Ave. Powell River, BC V8A 3N2 604-485-2707 604-485-2708
Rentquip Canada Limited Derek 107 5910 #6 Road Richmond, BC V6V 1Z1 604-241-0500 604-241-0600 www.rentquip.com
Delta Tool Repair Ltd. Ryan Hall 7533 - 135th Street, Unit 1 & 2 Surrey, BC V3W 0N6 604-591-3230 604-591-2048 www.airfastdistributors.com
Electrical Enterprise Ltd. Chris 4600 - 31st Street Vernon, BC V1T 5J9 250-542-1166 250-542-7713 www.electricmotorservices.ca
Troy Electric Motor Repairs Rick, Dave, Sonia 3131 Delta Ave., Unit 1 Victoria, BC V8Z 1A6 250-382-7442 250-382-7894 www.troyelectric.com
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
BRITISH COLUMBIA
Find the MILWAUKEE® Authorized Service source near you. Each Service location is prepared to provide the finest professional
power tool repair service, using Genuine MILWAUKEE® parts & service accessories, along with the latest in repair procedures
and test equipment. They are your number one source for repairs or warranty service on all MILWAUKEE® tools.
51
AUTHORIZED SERVICE CENTRES
Oscar’s Electric Co. Ltd. Stu, Kessie, John 310 Alexander St. Whitehorse, NWT Y1A 2L6 867-667-2330 867-633-6514
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
NORTHWEST TERRITORIES
Toolies Gerry 795 Westney Rd. S., Unit 3 Ajax, ON L1S2H6 1 905 683 8723 905-683-4071
Tony’s Power Tool & Vacuum Service Terry/Dave 59 Bell Farm Rd., Unit 4 Barrie, ON L4M 5G1 705-726-1142 705-726-1142
Emsco Motor Sales & Service James 57 Cannifton Rd. Belleville, ON K8N 4V1 613-966-3230 613-966-5806
Gilbert McEachern Electric Ltd. Greg, Bob 106 Alice Street Brantford, ON N3S 5B7 519-753-0465 519-753-0297
Bayshore Tool & Equipment Ian 1021 Waterdown Rd. Burlington, ON L7T 1N4 905-633-9214 905-633-9232
Corr Power Conrad Blasioli 242 Westbrook Rd Carp, ON K0A 1L0 613-836-2677 613- 836-2610
Waffles Electric Ltd. Perry 475 Riverview Dr. Chatham, ON N7M 5J5 519-354-2730 519-354-3282
Trion Power Tool Service Inc. Steven 176 Rivermede Rd., Unit 8 Concord, ON L4K 3M7 905-738-5060 905-738-5372 www.triontools.com
Karl’s Power Tools Sales & Service Karl 22 Goodmark Pl., Unit 25 Etobicoke, ON M9W 6R2 416-675-1310 416-749-5053
Foxboro Fasteners Limited Bob 830 Mudcat Rd. Foxboro, ON K0K 2B0 613-969-1933 613-969-0853
Active Tool Repair Carl 955 Barton St. E. Hamilton, ON L8L 3B3 905-545-7646 905-545-5415 www.activetoolrepair.com
Huntsville Armature Ltd. Klaus 51 Ferguson Rd, RR 1 Huntsville, ON P0A 1K0 705-789-9301 705-789-1223
K.C.’s Repair Center Josie Capling 156 Blandford Street Innerkip, ON N0J 1M0 519-469-3351 519-469-9224
Boyd Electric Ltd. David, Sandra 833 Portsmouth Ave. Kingston, ON K7M 1W6 613-548-4888 613-544-8854
R.M.W. Electric Ltd. Gary 350 Shirley Ave. Kitchener, ON N2B 2E1 519-744-1821 519-744-1674
The Tool Doctor Ltd. Matthew 30 Manitou Dr. Kitchener, ON N2C 1L3 519-748-4780 519-748-4973
Jean-Claude Cayer Enterprises Ltd. Luc Roy 708 chemin Limoges Limoges, ON K0A 2M0 613-443-2293 613-443-2022 www.jccayer.com
Crowder Repair Service Roger 16 Vimmy Rd. Lindsay, ON K9V 1W7 705-878-0658 705-878-4853
Global Tools & Equipment Steve 1075 Wallace Avenue North Listowel, ON N4W 3H7 519-291-2280 519-291-1695 www.globaltools.com
Sudbury Tool Repair Dan #112 120 Fielding Rd Lively, ON P3Y 1L5 705-524-5423 705-524-8043
A.C. Jenkins Repair Ltd. Scott 1188 Frances Street London, ON N5W 2M1 519-451-4020 519-451-4815 www.acjekins.com
Ampro Electric Ltd. Dan 20 Kitchener Avenue London, ON N5Z 2B2 519-439-9748 519-439-1832 www.amproelectric.com
Pryde Industrial Inc. Cory 542 Newbold Street London, ON N6E 2S5 519-690-1111 519-690-0048 www.prydeindustrial.com
Mississauga Repair Centre Walter/Adam 3120 Glen Erin Dr., Unit 16 Mississauga, ON L5L 1R6 905-828-1565 905-828-5014
Gateway Professional Tools Doug 790B Casels Street North Bay, ON P1B 4A4 705-495-4906 705-495-6167
Industrial Tool Repair Center John Fedoruk, Rick 2140 Speers Rd. Oakville, ON L6L 2X8 905-827-5661 905-827-5661
Crown Maintenance Inc. Cinda, Jodie 1280 Terwillegar Avenue, Suite 8 Oshawa, ON L1J 7A5 905-723-2322 905-723-0363
Comotech Controls, Motors, Technology Mike/Daniel 1735 Courtwood Crescent Ottawa, ON K2C 3J2 613-228-9480 613-228-0245
Mytek Power Tools Service Pat 110 - 2535 Blackwell St. Ottawa, ON K1B 4E4 613-749-7294 613-749-1926
Murray’s Sharpening & Tool Repair Murray 1190 - 2nd Avenue East Owen Sound, ON N4K 2H9 519-376-2495 519-376-2635
Larry Electric Motor Service Scott 164 Sherbrooke Street Peterborough, ON K9J 2N3 705-743-3167 705-748-0330
Lawrence Electric Motor Repair Dave 720 Confederation St. Sarnia, ON N7T 2C9 519-344-4112 519-337-9619
Twisted Toyz Motorsports Mike, Victoria 536 Second Line West Sault Ste Marie, ON P6C 2K6 705-759-0808 705-759-0801
George Power Tools Service Inc. Joe Fernadez 1365 Morningside Ave., Unit 11 Scarborough, ON M1B 3C5 416-286-3933 416-286-6027
Interline Wholesale Hardware Jim 3520 McNicoll Ave Unit 15-19 Scarborough, ON M1V 4C6 416-754-2211 416-754-2948
P.L.M. Repair Center Chris 3001 Markham Rd., Unit 22 Scarborough , ON M1X 1L6 416-332-8460 416-332-1386
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
ONTARIO
52
Tool - Air Ltd. Gerald 203 McGettingan Blvd. Marystown, NL A0E 2M0 709-279-2238 709-279-3000
Amazon John 99 Newcove St. John’s, NL A1A 2C2 709-738-7083
Rideout Tool & Machine Inc. Allister 222 Kenmount Rd. St. John’s, NL A1B 3R2 709-754-2240 709-739-9514 www.rideouttool.com
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
NEWFOUNDLAND & LABRADOR
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
NOVA SCOTIA
Top Line Rentals Inc. George Crawshaw 15 Albion Street Amherst, NS B4H 2V3 902-667-9850 905-738-5372 www.toplinerentals.com
Deiter’s Tool & Saw Service Deiter, Dan 19 Pettipas Dr., Unit F Dartmouth, NS B3B 1K1 902-468-4888
Maritime Lawn & Garden Tom, Dave 2790 Windsor St. Halifax, NS B3K 5E4 902-455-0208 905-455-5835
Belmac Henderson Supply Ltd. Cecil 341 Welton St. Sydney, NS B1P 6K3 902-539-6006 902-562-4470
AUTHORIZED SERVICE CENTRES
53
The Tool Doctor Ltd. Chris 70 Milner Ave., Unit 2 Scarborough , ON M1S 3P8 416-292-2290 416-292-1202
Porcupine Air & Electric Tool Repair Ken, Alice, Hartly 234 Crawford St. South Porcupine, ON P0N 1H0 705-235-8950 705-235-8950
A & A Power Tool Repair Inc. Adri 10A Nihan Dr. St. Catherines, ON L2N 1L1 905-646-4881 905-646-7271 www.powertoolrepair.ca
Kaupp Electric Ltd. Gille 225 Merritt St. St. Catherines, ON L2T 1J7 905-227-1661 905-227-5192 www.entool.on.ca
Apollo Tool Repair Lisa, Sara 367 Barton St. East Stoney Creek, ON L8E 2L2 905-544-5202 905-544-5202
Northfast Ltd. Sean 257 Regent St. S. Sudbury, ON P3C 4C6 705-673-1449 705-673-1449
Mahon Electric Ltd. Rick 340 Waterloo St. N. Thunder Bay, ON P7C 5Y3 807-623-8471 807-623-5012 www.mahonelectric.ca
Ampro Electric Ltd. Randy/Brad 346 Simcoe St. Tillsonburg, ON N4G 2J8 519-842-7194 519-842-7234 www.amproelectric.com
Gem Electric Motor Service Ltd. 151 Wilson Ave. Timmins, ON P4N 2T2 705-264-0668 705-264-0669
Angelo’s Electric Ltd. Sean 125 Oakdale Rd. Toronto, ON M3N 1W2 416-734-5434 416-743-5346
Automotive Tool Repair & Supply Inc. Neil 1178 The Queensway Toronto, ON M8Z 1R5 416-255-7789 416-255-2287
Pipe Tools Supply Ltd. Paul 114 Rivalda Rd. Toronto, ON M9M 2M8 416-749-5830 416-749-7224
Rapid Nail Canada Inc. Cheryl 48 Pinestead Rd. RR3 Utterson, ON P0B 1M0 705-385-2344 705-385-3183
Waco Equipment Repair Ray 2779 Howard Avenue Windsor, ON N8X 3X7 519-972-5551 519-972-5551
Vital Tool Repair & Rentals Rag 127B Aviva Park Dr. Woodbridge, ON L4L 9C1 905-264-9116 905-851-8328 www.inverstmentshardware.com
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
ONTARIO - Con’t
Neil’s Sales & Service Neil 375 Mount Edward Rd. Charlottetown, PE C1A 2A1 902-894-3490
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
PRINCE EDWARD ISLAND
QUEBEC
Dorson Ltee. Michel 8551 boul Parkway Anjou, QC H1J 1N1 514-351-0160 514-351-4103 www.dorson.ca
Products & Services Inc. Yvan Lepage 11200 Colbert Anjou, QC H1J 4S3 514-355-9650 514-355-9243
Centre De Location Cote-Nord Inc. Joel 174 boul Lasalle Baie Comeau, QC G4Z 1S4 418-296-9691 418-296-9400
Outillage Placide Mathieu Inc. Denis Mathieu 670 rue Picard Beloeil, QC J3G 5X9 450-467-3565 450-467-2195 www.placide.com
J. Sirois Electrique Inc. Sylvain Dufour 2203 rue Roussel Chicoutimi, QC G7G 1W4 418-543-3308 418-696-1854 www.sirois.qc.ca
Service Et Reparation CGM Inc. Frederic 1700 boul St. Paul, bur #105 Chicoutimi, QC G7J 4N1 418-549-6739 418-549-8984
Docteur De L’Outil Inc. Robert Levesque 200A rue Dorion Drummondville, QC J2C 1T9 819-478-1109 819-478-1587
Marcel Baril Ltd. 780 boul Greber Gatineau, QC J8V 3P8 819-243-8903
Outilstech Inc. (Lapensee Sharpening) Darren 400 boul des Trembles Gatineau, QC J9A 3S1 819-205-0666 819-205-0966
Armature Shefford Inc. 200 rue Cartier Granby, QC J2G 5A7 450-375-1414
Reparation De Moteurs Electriques Sam Inc. Robert 730 rue Richard Joliette, QC J6E 2T3 450-759-0652 450-759-2289 www.sammoteurs.com
Outils Tech (99192-5594 Quebec Inc) 28 De L’Eglise Sud, Local 101 Lacolle, QC J0J 1J0 450-246-3360
Service d’Outils FGL Inc. Natalie 949 rue Michelin LavaL, QC H7L 5B6 450-972-7979 450-972-1037 www.outil-fgl.com
Electro-Moteurs RS Federic Leclerc 4895 boul de la Rive sud Levis, QC G6W 1H3 418-837-7982 418-837-7578
Inolec Inc. Daniel Blair 100 rue de Port-Royal est Montreal, QC H3L 1H7 514-384-9021 514-384-9031 www.inolec.com
Instrument Sales & Service Inc. Kim Kennedy 605d de Maisonneuve ouest Montreal, QC H4A 3R8 514-481-8111 514-482-1640 www.iss-sales-service.com
Service De Reparation D’Outillage Claude 1124 rue St-Calixte Plessisville, QC G6L 1N8 819-362-7373 819-362-6828 www.fourniturespasco.com
Servi-max Inc.
Clinique D’Outillage M.P. Inc. Patrick Pepin 3075 boul Hamel #107 Quebec, QC G1P 4C6 418-877-3371 418-877-3958 www.outillagemp.com
Etaltech Inc. Christian Clavet, Caroline 587 Adanac, local 101 Beauport, QC G1C 7G6 418-660-6081 418-660-6554 www.etaltech.com
Fixations Premier Inc. Claude Gelinas 6655 boul. Pierre-Bertrand nord, local 101 Quebec, QC G2K 1M1 418-681-4733 418-681-3950 www.fixationspremier.com
Reparation D’Outils R. Martel Inc Pierre Marceau 2025 Rue Lavoisier, Local 180 Quebec, QC G1N 4L6 418-681-9444 418-681-0067 www.reparationoutils.com
Service D’Outillage Central Inc. Lina 2410 boul. Central Quebec, QC G1P 3N8 418-682-0560 418-682-6110 www.outillagecentral.com
Reparation Yves Proulx Enr. Yves 570C St-Germain Est. Rimouski, QC G5L 1G4 418-725-0800 418-725-0844
Equipements TNO Inc. Michel Hein 325 boul. Industriel Rouyn-Noranda, QC J9X 6P2 819-764-3221 819-797-1781
Veilleux & Fils Inc. Kathy 3195 6e Avenue Saint-Georges G5Y 5E6 418-228-6207 418-228-4645 www.veilleuxetfils.com
de Beauce, QC
Atelier D’Outils Electriques Jeff Sylvester 4124 boul Industriel Sherbrooke, QC J1L 2S6 819-346-1775 819-569-2218 www.dorson.ca
Do-Mar Electrique Inc. Julien Beliveau 1136 rue King est Sherbrooke, QC J1G 1E4 819-563-2234 819-563-9966 www.do-marelectrique.com
Alain Mailloux Dynatech Louise Roy 788 chemin Riviere-Verte St-Antonin, QC G0L 2J0 418-867-3811 418-867-3159
Les Moteurs Electriques De Beauce Rejean Bissson 1120 Notre-Dame Nord Ste-Marie, QC G6E 2L5 418-387-2910 418-387-6627 www.moteurselectriquesdebeauce.com
Centre De Service De L’Outil HM Inc. Monique 5825 boul. Laurier ouest St-Hyacinthe, QC J2S 3W1 450-774-7788 450-774-2777
Moteurs Electriques St-Jean Enrg. Noemia Grenier 505 Saint-Jacques St-Jean-sur-Richelieu, QC J3B 2M1 450-347-3265 450-346-1576 www.mesj.ca
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
www.MILWAUKEETOOL.COM
AUTHORIZED SERVICE CENTRES
Centre D’Electricite Jeromien Inc. Brigitte Houle 803 rue St-Georges St-Jerome, QC J7Z 5E1 877-476-9914 450-436-2528 www.cej.ca
Service D’Outils ACM Alain, Michelle 2071 Victoria St-Lambert, QC J4S 1H1 450-466-1173 450-466-8980 www.acmoutils.com
Jacques Pelletier Electrique Jacques 1915 chemin de Patriotes St-Ours, QC J0G 1P0 450-785-3076 450-785-3076
Outillage B & G Cadieux Inc. Francois 2472 boul. Des Entreprises Terrebonne, QC J6X 4J8 450-477-1338 450-477-5300 www.csinet.ca
Outibo Inc. Louis Giroux, Sylvin 351 rue Vachon Trois-Rivieres, QC G8T 1Z6 819-373-7518 819-373-8370 www.outibo.com
Hytex 85 Inc. Rejean Lacasse 1721 chemin Sullivan Val-D’Or, QC J9P 1M1 819-825-1475 819-825-1290
Centre De Reparation D’Outils George Grenon, Katrina 622 rue Gaetan Valleyfield, QC J6S 0A7 450-373-6055 450-373-3459
Baril Electrique Inc. Michel Lainesse 8 boul. Labbe sud Victoriaville, QC G6S 1B5 819-752-4480 819-795-3314 www.outilmag.qc.ca
Outil Pac Inc. Kevin or Robinson 5895 Andover Ville Mont-Royal, QC H4T 1H8 514-733-3555 514-733-6223 www.outilpac.com
QUEBEC - Con’t
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
Martensville Rental Centre Kevin 417 Centennial Drive South Martensville, SK S0K 2T0 306-978-3113 306-384-9595
Regina Power Tool Service Ltd. Ben 1801B MacDonald Street Regina, SK S4N 7A2 306-352-3106 306-352-3106
Ted’s Power Tool Repair Ltd. Ryan/Troy/Mike 426 - 44th Street East Saskatoon, SK S7K 0W1 306-934-6155 306-934-6687
CONTACT CITY/ POSTAL
COMPANY NAME NAME(S) ADDRESS PROVINCE CODE TELEPHONE FAX WEBSITE
SASKATCHEWAN
54
www.MILWAUKEETOOL.COM
LIMITED WARRANTY
Every MILWAUKEE® product is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain
exceptions, MILWAUKEE® will repair or replace any part on a product which, after examination, is determined by MILWAUKEE® to be defective in
material or workmanship for a period of five (5) years* after the date of purchase. Return the product and a copy of proof of purchase to a
MILWAUKEE® factory Service Centre location or MILWAUKEE® Authorized Service Station, freight prepaid and insured. This warranty does not
apply to damage that MILWAUKEE® determines to be from repairs made or attempted by anyone other than MILWAUKEE® authorized personnel,
misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
*Every MILWAUKEE® V™-technology (V18™ & V28™) LITHIUM-ION Battery Pack and M18 XC LITHIUM-ION Battery Pack is warranted for five (5)
years / 2000 charges from the date of purchase, whichever first occurs. The first 1,000 charges or 2 years of the warranty, whichever first occurs,
are covered through free replacement of the defective battery. This means that for the earlier of the first 1,000 charges or two (2) years from the
date of purchase/first charge, a replacement battery will be provided to the customer for any defective battery free of charge. Thereafter, the
remaining charges up to a total of 2,000 or the remainder of the five (5) year period from the date of purchase, whichever first occurs, will be
covered on a pro rata basis. This means that every customer gets an additional 1,000 charges or three (3) years of pro rata warranty on the
V™ technology LITHIUM-ION Battery Pack and M18 XC LITHIUM-ION Battery Pack depending upon the amount of use.
*The warranty period for ALL other LITHIUM-ION Battery Packs is two (2) years from the date of purchase.
*The warranty period for Portable Generators is two (2) years from the date of purchase.
*The warranty period for M12 2-Beam Laser & M12 Power Port, Ni-CD Battery Packs, Job Site Radios, Trade Titan™ Industrial Work Carts and Hoists
(lever, hand chain, & electric chain hoists) is one (1) year from the date of purchase.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE® product. The manufacturing date of the product will be
used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
Normal Wear: air nailers – staplers, like all power tools, these products need periodic parts replacement and service to achieve best performance.
This warranty does not cover repair when normal use has exhausted the life of a part including, but not limited to, o-rings, seals, bumpers and driver
blades.
MILWAUKEE® does not cover freight or labor charges associated with the inspection and testing of portable generators or hoists (lever, hand chain &
electric chain hoists) that are found by MILWAUKEE® not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery
of defective material or workmanship by MILWAUKEE®.
*Gasoline Engine - Warranty: The gasoline engine on a portable generator is separately warranted by the engine manufacturer and is serviced
through the engine manufacturer’s authorized service center network. MILWAUKEE® is not authorized and has no responsibility for warranty service
of any nature whatsoever for a gasoline engine. If requested, MILWAUKEE® will help you locate your nearest service facility for a gasoline engine.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF
EVERY MILWAUKEE® PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL
MILWAUKEE® BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES,
LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED
TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL,
EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to product sold in the U.S.A., Canada and Mexico only.
Please consult the ‘Service Center Search’ in the Parts & Service section of the MILWAUKEE® website, www.milwaukeetool.com
or call 1-800-268-4015 to locate your nearest service facility for warranty and non-warranty service on a MILWAUKEE® product.
MILWAUKEE® ELECTRIC TOOL COMPANY
7303 WARDEN AVENUE, SUITE 202
MARKHAM, ONTARIO, CANADA L3R 5Y6
TEL: 1-800-268-4015
FAX: 1-866-285-9049
EMAIL: custservcanada@ttigroupna.com
OR milwaukeeorders@ttigroupna.com
www.MILWAUKEETOOL.COM
