1000513386 Catalog

2016-09-04

: Pdf 1000513386-Catalog 1000513386-Catalog B4 unilog

Open the PDF directly: View PDF .
Page Count: 162 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Catalogue

PowerLogic

Energy management, revenue metering and power quality monitoring

Electrical network management

2plsed309005eN

General contents

PowerLogic™ applications

Market segments

Panorama of the PowerLogic range

Index of catalogue numbers

Power management software introduction

149

Current transformers 16

Panel instruments 25

iAMP iVLT iFRE AMP/VLT iCH/iCI

Basic energy meters 35

iEM2000 iEM3000

Multi-circuit and wireless metering 43

BCPM EM4300 EM4800

Basic multi-function metering 61

PM3000 PM5350 PM5000

Intermediate metering 85

PM800 PM8000

Advanced metering 100

ION7550/ION7650 CM4000T

Advanced utility metering 114

ION8650 ION8800

Communications 129

Energy Server Com'X

200/210/510 EGX100/300 ION7550 RTU

Power management software 149

PLSED309005EN

PowerLogic technology forms one part of your total energy

management solution from Schneider Electric. As the global

energy management specialist, we offer end-to-end power,

building and process management solutions that help you

optimise energy use and costs, improve performance,

enhance comfort and safety, and deliver uninterrupted service

while taking responsible care of our planet.

Our expert services can help you audit your energy use and

build your energy action plan. From power factor correction

systems, harmonic ltering and variable speed drives to HVAC

and lighting controls, we offer a complete range of energy

efcient technologies.

Schneider Electric believes every business can increase

productivity while consuming less and achieving energy

savings of 10% to 30%.

Saving energy reduces costs and pollution, but you need the

tools to uncover all opportunities, avoid risks, track progress

against goals, and verify success. Schneider Electric

provides these tools via the world’s most advanced energy

intelligence technology: PowerLogic.

The PowerLogic range of meters and software help manage

all energy assets, every second of the day. A PowerLogic

system enables all stakeholders, from CEO to facility and

engineering managers, to respond quickly to potential

problems and manage energy in nancial and environmental

terms.

PowerLogic technology delivers the key performance

indicators and analytics that you need to strategically balance

emissions, efciency, reliability and cost.

What is PowerLogic?

4PLSED309005EN

Cutting-edge technology to increase protability

PowerLogic technology converts the complex dynamics governing the relationship between power generation and distribution on the utility

side, and energy consumption, cost and reliability on the consumer side, into timely, easily understood information. Businesses can use this

powerful to improve tactical actions and strategic decision making.

From a single facility to an entire enterprise, PowerLogic meters monitor key distribution points 24 hours a day. Whether from generators,

substations, service entrances, mains, feeders, loads or 3rd party equipment and systems, PowerLogic technology tracks, records and reports

all real-time conditions and historical performance data. Intuative web-based interfaces give stakeholders access to this data as well as

advanced analytics, alarm annunciation and control capabilities. It supports comprehensive energy management programs by tracking

performance and empowering you to make effective decisions.

Power availability

and reliability

bValidate that power quality

complies with the energy contract

bVerify the reliable operation of

power and mitigation equipment

bImprove response to power-

related problems

bLeverage existing infrastructure

capacity and avoid over-building

bSupport proactive maintenance

to prolong asset life

Energy efciency

and cost savings

bMeasure efciency, reveal

opportunities and verify

savings

bManage green house gas

emissions

bAllocate energy costs to

departments or processes

bReduce peak demand and

power factor penalties

bEnable participation in load

curtailment programs

(e.g. demand response)

bStrengthen rate negotiation

with energy suppliers

bIdentify billing discrepancies

bSub-bill tenants for energy

costs

Energy availability

and reliability

bImprove T&D network

reliability

bEnhance substation

automation

bMaximise the use of your

existing infrastructure

Revenue metering

and power quality

bMaximise metering accuracy

at all interchange points

bVerify compliance with new

power quality standards

bAnalyse and isolate the source

of power quality problems

Applications for Supply and Demand

Applications

Your power monitoring system needs to be an integral part

of your overall business strategy. PowerLogic ts in with

your objectives and expands your network's capabilities

with wide ranging, exible deployment options to meet

your needs.

PLSED309005EN

Industry

From nance to engineering, PowerLogic technology gives industry professionals

the energy intelligence and control they need to support strategic decisions and

establish best energy practices. It will help you reduce operational costs and meet

new emissions standards without compromising production schedules or product

quality. Key points are monitored throughout your power distribution, building and

backup systems. Enterprise-level software helps you maximise the use of your

existing energy assets, increase energy efciency and avoid demand or power

factor penalties. Use it to uncover hidden power problems that can shorten

equipment life or cause costly downtime.

Market segments

Buildings

Today, facility managers are pushed to the limit with demands on time, staff

reductions, increasing responsibilities, complexity of systems, and capex and opex

pressures. At the same time, critical business operations depends on your ability to

maintain reliable operations, reduce energy costs, and get the most out of your

electrical assets. PowerLogic offers cutting-edge exibility let you extend your power

management system at your own pace and within your own budget. It allows for

integration with third-party devices and systems. Save thousands of engineering

hours with ready-to-use device drivers and precongured reporting procedures.

• cost allocation

• procurement optimisation

• power factor correction

• measurement and

verication

• infrastructure optimisation

• power quality analysis

• tenant sub-billing

• cost allocation

• energy efciency /

benchmarking

• procurement optimisation

• power availability

• demand response / load

curtailment 30%

Monitoring and control

systems can save you up

to 30% on your annual

energy bill

6PLSED309005EN

Critical infrastructure

PowerLogic technology helps keep your systems operating continuously and

securely with an economical supply of energy. Whether you manage data,

communication, transportation or environmental services, minimising the risk of

power-related downtime and keeping costs under control is a priority. A

PowerLogic solution monitors all power and cooling systems and accurately tracks

their energy consumption. Enterprise-level software delivers insightful diagnostics

and metrics to help verify the reliability of your backup systems and maximise the

use of existing capacity to defer new capital investments. You can also reveal

energy inefciencies and strengthen energy procurement across multiple sites.

Utilities

Today’s energy market is more complex than ever before. Whether you generate,

transmit or distribute electricity, more stakeholders need shared access to timely,

accurate energy data from more exchange points and you need to maintain power

availability and reduce price volatility in the face of rising demand and transmission

congestion. A PowerLogic energy information system helps you meet all of these

challenges by:

bMetering all key interchange points with the highest possible accuracy

bImproving the quality of power delivered to your customers

bEssuring the reliability and efciency of your network and equipment.

From advanced energy and power quality metering systems to enterprise-level

analytic software, PowerLogic solutions deliver business-critical information that

conventional metering, SCADA and billing systems cannot. It gives you the energy

intelligence and control needed to track performance, stay informed of critical

conditions and empower you to make strategic decisions. It will help you increase

reliability, maximise the use of resources and improve service.

• infrastructure optimisation

• power quality analysis compliance

• alarming and event notication

• energy efciency

• cost allocation

• procurement

optimisation

• revenue metering

• power availability and reliability

Market segments (cont.)

PLSED309005EN

Panorama of the PowerLogic

range

Product selection guide

Current transformers Basic panel meters

CT Name iAMP / iVLT AMP / VLT iFRE iCH / iCI

current transformer Function ammeter, voltmeter frequency meter hour counter

pulse counter

Installation

b�insulated cable,

diameter 21 to 35 mm,

through transformer

b�busbar through transformer

b�cable connections

Applications

Panel instrumentation

Panel instrumentation I / U I / U Fhours /pulses

Energy efciency and cost

Sub billing and cost allocation

Demand and load management

Billing analysis

Power availability

and reliability

Compliance monitoring

Sag/swell, transient

Harmonics

Revenue metering

Revenue meter

Characteristics Characteristics

b�transformation ratio:

40/5 A to 6000/5 A

b�accuracy: class 0.5 to 3

b�maximum rated

operational voltage: 720 V AC

b�tropicalised

Measurement accuracy class 1.5 ± 0.5 % ± 1

digit

class 1.5 ± 0.5 % ± 1 digit

Installation

DIN rail

4 x 18 mm

modules

DIN rail

2 x 18 mm

modules

ush mounted

72 x 72 mm

96 x 96 mm

DIN rail

2 x 18 mm

modules

iCI, iCH: DIN rail

2 x 18 mm

modules

CH: ush mount

Voltage measurement iVLT,:

500 V AC direct

or external VT

iVLT:

600 V AC direct

or external VT

VLT:

500 V AC direct

or external VT

400 V AC direct

Current measurement iAMP:

30 A direct

or external CT

iAMP:

10 A direct

or external CT

AMP:

external CT

Communication ports

Inputs / Outputs

Memory capacity

page 16 page 25 page 25 page 27 page 25 page 31

8PLSED309005EN

Panorama of the PowerLogic

range (cont.)

Product selection guide

Basic energy meters Multi-circuit metering

Name iEM2000 /

iEM2010 / iEM2000T /

iEM2100

iEM3000 Series BCPM EM4800

Function kilowatt-hour meters branch circuit monitor

IEC 61036 Class 1

multi-circuit energy meter

Class 0.5 ANSI C12.1, C12.20

Class 0.5S IEC 62053-22

Applications

Panel instrumentation

Panel instrumentation EI, U, F, P, Q, S, PF, E

(Power demand and

current demand)

I, U, F, P, Q, S, PF, E

(Power demand and

current demand)

I, U, F, P, Q, S, PF, E

(Power demand and

current demand)

Energy efciency and cost

Sub billing and cost allocation

Demand and load management

Billing analysis

Power availability

and reliability

Compliance monitoring

Sag/swell, transient

Harmonics

Revenue metering

Revenue meter

Characteristics

Measurement accuracy Class 0.5S / Class 1 class 1 (mains active energy) Class 0.5S

Installed in panel or enclosure Installed in panel or

enclosure

Installation

DIN rail

1, 2, 5, or 7 x 18 mm modules

90 – 277 V Line to Neutral

voltage Inputs

80 - 480 V AC L-L without PTs,

Up to 999 kV with external PTs

CT strips for branch circuits

and external CTs for mains

Split- or solid-core CTs

Voltage measurement 400 V AC direct 50 V to 330 V (Ph-N)

80 V to 570 V (Ph-Ph)

up to 1MV AC (ext VT)

1 for main 2

Current measurement 40 to 125 A direct

or external CT

Communication ports

page 35 page 38 page 43 page 58

PLSED309005EN

Panorama of the PowerLogic

range (cont.)

Product selection guide

Basic multi-function metering

Name PM3000 Series PM5350 / PM5350IB PM5100 / PM5300 /

PM5500

Function metering & sub-metering

Class 0.5S IEC 62053-22

Class 1 IEC 62053-21

Class 2IEC 62053-23

Class 0.5S IEC 62053-22

Class IEC 61000-4-2

Class IEC 61000-3-3

metering & sub-metering

Class 0.5S

IEC 62053-22

Class 0.2S (PM55xx)

IEC 62053-22

Class 1/2 IEC 62053-24

Applications

Panel instrumentation

Panel instrumentation I, U, F, P, Q, S, PF, E

(Power demand and

current demand)

I, U, F, P, Q, S, PF, E

(Power demand and

current demand)

I, U, F, P, Q, S, PF, E

(Power demand and

current demand)

Energy efciency and cost

Sub billing and cost allocation

Demand and load management

Billing analysis

Power availability & reliability

Harmonics

Dip/swell, transient

Compliance monitoring

Revenue metering

Characteristics

Measurement accuracy

(active energy)

Class 0.5 Class 0.5 Class 0.2S (PM55xx)

Class 0.5S

Installation

DIN rail Flush mount

96 mm x 96 mm

Flush mount

96 mm x 96 mm

Voltage measurement

50V to 330V AC (Ph-N)

80V to 570V AC (Ph-Ph)

up to 1MV AC (ext VT)

20-480 V AC (L-L)

20-277 V AC (L-N)

20 V L-N / 35 V L-L to 277 V L-N

/480 V L-L

/600 V L-L (PM55xx)

Current measurement external CT external CT external CT

Communication ports 1 1 2

Inputs / Outputs

2 I/O

4 I/O

6 I/O (PM55xx)

Memory capacity 256 kb

1.1 MB (PM55xx)

page 68 page 73 page 85

10 PLSED309005EN

Intermediate metering

Name PM810 PM820 /

PM850

PM870 PM8000

Function energy and basic PQ power meter

IEC 61557-12

PMD/SD/K70/0.5

PMD/SS/K70/0.5

ANSI 12.20 Class 0.2S real energy

energy and basic PQ meter

IEC 61557-12

IEC 62053-22

IEC 61000-4-30 Class S

IEC 62586 PQI-S

ANSI C12.20 Class 0.2

PMD/Sx/K70/0.2

Applications

Panel instrumentation

Panel instrumentation I

, U, F, P, Q, S, PF, E, THD, Min/Max,

harm, alarm, I/O (I, U unbalance,

demand, clock/cal (PM810 w/PM810LOG)

I, U, F, P, Q, S, PF, E, THD, Min/Max,

harm, alarm, I/O (I, U unbalance,

demand, clock/cal

Energy efciency and cost

Sub billing and cost allocation

Demand and load management

Billing analysis

Power availability & reliability

Harmonics w/PM810LOG

Dip/swell, transient dip/swell

Compliance monitoring PM850 only

Revenue metering

Characteristics

Measurement accuracy

(active energy)

ANSI 62053-22 Class 0.5S

ANSI 12.20 Class 0.2S

IEC 61053-22 Class 0.2S

ANSI 12.20 Class 0.2S

Installation

Flush & DIN rail mount

96 mm x 96 mm

Flush & DIN rail mount

96 mm x 96 mm

Voltage measurement

0-347 VAC L-N 3P (0-600 VAC L-L) 57-400 VAC L-N 3P

(100-690 VAC L-L)

Current measurement external CT external CT external CT external CT

Communication ports 1 - 4 (option) 1 - 4 (optionw) 1 - 4 (options) 2

Inputs / Outputs 18 I/O 18 I/O 18 I/O up to 27 DI, 9 DO

up to 16 AI, 8 AO

Memory capacity

80 kb with

PM810 LOG

80 / 800

800

512 MB

page 92 page 100

Panorama of the PowerLogic

range (cont.)

Product selection guide

PLSED309005EN

Advanced metering Advanced utility metering

Name

ION7550 ION7650

CM4000T ION8650 ION8800

A B C A B C

Function energy & power quality meter

IEC 62052-11

IEC 62053-22/23

Class 0.2S

IEC 61000-4-30 Class A

energy & power quality meter

IEC 62053-22

ANSI 12.20 Class 0.2S real

energy

energy & power quality meter

IEC 62052-11

IEC 62053-22/23

Class 0.2S

IEC 61000-4-30 Class A

energy & power quality meter

IEC 62052-11

IEC 62053-22/23

Class 0.2S

IEC 61000-4-30

Applications

Panel instrumentation

Panel instrumentation I, U, F, P, Q, S, PF, E (demand, minimum and maximum values) I, U, F, P, Q, S, PF, E (demand, minimum and maximum

values)

Energy efciency & cost

Sub billing and cost allocation

Demand and load management

Billing analysis

Power availability & reliability

Harmonics

Dip/swell, transient

Compliance monitoring

Revenue metering

Characteristics

Measurement accuracy

(active energy)

Class 0.2S Class 0.2S Class 0.2S Class 0.2S

Installation

DIN 192

standard cutout

(186 x 186 mm)

ANSI socket mount 9S, 35S,

36S, 39S and 76S; FT21

switchboard case

DIN 43862 rack

Voltage measurement 57-347V L-N AC or

100-600V L-L AC

0 to 600 V AC

0 to 1200 kV AC (ext. VT)

57-277V L-N AC

(9S, 36S);

120-480 V L-L AC (35S)

57-288V L-N AC or

99-500V L-L AC

Current measurement external CT external CT external CT external CT

Communication ports 5 3 5 5

Inputs / Outputs up to 32 I/O up to 25 I/O up to 22 I/O up to 16 I/O

Memory capacity up to 10 MB up to 32 MB 10 MB 4 MB 2 MB up to 10 MB

page 107 page 114 page 121 page 129

Panorama of the PowerLogic

range (cont.)

Product selection guide

12 PLSED309005EN

Panorama of the PowerLogic

range (cont.)

Product selection guide

Communications Power management software

Name Com'X 200 / 210 /

510

EGX100 / 300 ION7550 RTU StruxureWare™ Power management

software

Function Ethernet GPRS data

logger

Ethernet Integrate

gateway server

Ethernet

gateway-server +

onboard I/O

Power management

Features

RS485 / Ethernet gateway

Devices supported

EM3000 Series, iEM3000

Series, PM800 Series,

ION7300,

Acti 9 Smartlink Masterpact,

PM5000 Series, Compact

NSX,

iEM1,

iEM2000,

iEM3000,

PM3000 Series

Acti 9 Smartlink,

BCPM Series,

CM Series

PM800 Series, CM4000

Series,

DM6000, DM6300,

iEM3000 Series,

ION8800, ION7550/7650,

PM200, PM300, PM5350,

PM700, PM800, Sepam

Series,

Compact NSX,

Vigilohm IM20/IM20-H

PM5350, PM8000

ION8800, ION7550/7650,

Modbus devices

PM5350

PM5000

PM8000

Web server with

standard HTML pages

(Conguration only) (Conguration only)

Web server with

custom HTML pages

EGX300 only

Real time data EGX300 only

Historical data

Export to Internet database

server

EGX300 only

Automatic notication

Alarm and event logs

Waveform display

Custom animated graphics

Manual/automatic reports

Characteristics

Ethernet ports

Modbus TCP/IP protocol

210/100 Base

TX port

10/100 Base

TX port

StruxureWare™ is a suite of interoperable,

and scalable supervisory software dedicated

to power monitoring that enables you to

maximize operational efciency, optimize

power distribution systems, and improve

bottom-line performance.

RS485 (2-wire / 4-wire) ports

Modbus protocol

1 1 1

Number of devices

connected directly

32 modbus devices

6 pulse meters (or dry

contacts) – 2 analogue

sensors

32 64

RS232 conguration ports 1 1

Miscellaneous Connectivity: WiFi,

GPRS,or Ethernet

Serial line to Ethernet

connectivity

modem port

I/O (24 I/30 O max)

Installation DIN rail DIN rail DIN 192 cutout

(186 x 186 mm)

page 138 page 144 page 148 page 156

PLSED309005EN

Index of catalogue numbers

Cat. no. Description Page

15100

15125 iCMV voltmeter selector switch, DIN rail 30

15126 iCMA ammeter selector, DIN rail 30

15200

15201 iVLT digital voltmeter, DIN rail 26

15202 iAMP direct reading digital ammeter, DIN rail 26

15208 iFRE digital frequency meter, DIN rail 26

15209 iAMP multi-rating digital ammeter, DIN rail 26

15400

15440 iCH hour counter, DIN rail (230 V AC) 31

15443 iCI impulse counter, DIN rail 32

15600

15607 CH hour counter, 48 x 48 (24 V AC) 31

15608 CH hour counter, 48 x 48 (230 V AC) 31

15609 CH hour counter, 48 x 48 (12 to 36 V DC) 31

16000

16029

iAMP analogue ammeter for direct connection, DIN

rail

16030 iAMP analogue ammeter for connection to TC

(delivered without dial), DIN rail

16031 Dial, 0-5 A, for iAMP 16030 25

16032 Dial, 0-50 A, for iAMP 16030 25

16033 Dial, 0-75 A, for iAMP 16030 25

16034 Dial, 0-100 A, for iAMP 16030 25

16035 Dial, 0-150 A, for iAMP 16030 25

16036 Dial, 0-200 A, for iAMP 16030 25

16037 Dial, 0-250 A, for iAMP 16030 25

16038 Dial, 0-300 A, for iAMP 16030 25

16039 Dial, 0-400 A, for iAMP 16030 25

16040 Dial, 0-500 A, for iAMP 16030 25

16041 Dial, 0-600 A, for iAMP 16030 25

16042 Dial, 0-800 A, for iAMP 16030 25

16043 Dial, 0-1000 A, for iAMP 16030 25

16044 Dial, 0-1500 A, for iAMP 16030 25

16045 Dial, 0-2000 A, for iAMP 16030 25

16060 iVLT analogue voltmeter (0-300 V), DIN rail 25

16061 iVLT analogue voltmeter (0-500 V), DIN rail 25

16073 AMP analogue ammeter, 96 x 96, for motor feeder

(delivered without dial)

16074 AMP analogue ammeter, 96 x 96, for standard feeder

(delivered without dial)

16075 VLT analogue voltmeter, 96 x 96 28

16076 Dial, 0-30-90 A, for AMP 16073 28

16077 Dial, 0-75-225 A, for AMP 16073 28

16078 Dial, 0-200-600 A, for AMP 16073 28

16079 Dial, 0-50 A, for AMP 16074 28

16080 Dial, 0-100 A, for AMP 16074 28

16081 Dial, 0-200 A, for AMP 16074 28

16082 Dial, 0-400 A, for AMP 16074 28

16083 Dial, 0-600 A, for AMP 16074 28

16084 Dial, 0-1000 A, for AMP 16074 28

16085 Dial, 0-1250 A, for AMP 16074 28

16086 Dial, 0-1500 A, for AMP 16074 28

16087 Dial, 0-2000 A, for AMP 16074 28

16088 Dial, 0-2500 A, for AMP 16074 28

16089 Dial, 0-3000 A, for AMP 16074 28

16090 Dial, 0-4000 A, for AMP 16074 28

16091 Dial, 0-5000 A, for AMP 16074 28

16092 Dial, 0-6000 A, for AMP 16074 28

16500

16550 Adapter for DIN rails 44x66x37 16

16551 Adapter for DIN rails 56x84x60 19

16552 Lead-sealable cover for TC transformer 19

16553 Lead-sealable cover for TC transformer 19

A9MEM2000 iME2000 single-phase kilowatt-hour meter 35

A9MEM2010 iME2010 single-phase kilowatt-hour meter 35

A9MEM2100 iEM2100 basic energy meter 35

Cat. no. Description Page

A9MEM2105 iEM2105 energy meter, kWh pulse output with partial

meter

A9MEM2110 iEM2110 energy meter, kWh and kvarh pulse outputs

with two tariffs, four quadrant, energy measurement,

MID certied

A9MEM2135 iEM2135 energy meter, M-Bus communication, four

quadrant energy measurement, two tariffs, MID

certied

A9MEM2150 iEM2150 energy meter, Modbus communication, four

quadrant energy, measurement

A9MEM2155 iEM2155 energy meter, Modbus communication, four

quadrant energy measurement, two tariffs, MID

certied

A9MEM3100 iEM3100 basic energy meter 42

A9MEM3110 iEM3110 energy meter with pulse output 42

A9MEM3115 iEM3115 multi-tariff energy meter 42

A9MEM3135 iEM3135 advanced multi-tariff energy meter &

electrical parameter plus M-Bus comm port

A9MEM3150 iEM3150 energy meter & electrical parameter

plus Modbus RS485 comm port

A9MEM3155 iEM3155 advanced multi-tariff energy meter & electrical

parameter plus Modbus RS485 comm port

A9MEM3165 iEM3165 advanced multi-tariff energy meter & electrical

parameter plus Modbus, BACnet MS/ TP comm port

A9MEM3175 iEM3175 advanced multi-tariff energy meter & electrical

parameter plus LON TP/FT-10 comm port

A9MEM3200 iEM3200 basic energy meter 42

A9MEM3210 iEM3210 energy meter with pulse output 42

A9MEM3215 iEM3215 multi-tariff energy meter 42

A9MEM3235 iEM3235 advanced multi-tariff energy meter &

electrical parameter plus M-Bus comm port

A9MEM3250 iEM3250 energy meter & electrical parameter plus

RS485 comm port

A9MEM3255 iEM3255 advanced multi-tarrif energy meter &

electrical parameter plus RS485 comm port

A9MEM3265 iEM3265 advanced multi-tariff energy meter & electrical

parameter plus Modbus, BACnet MS/ TP comm port

A9MEM3275 iEM3275 advanced multi-tariff energy meter & electrical

parameter plus LON TP/FT-10 comm port

A9MEM3300 iEM3300 basic energy meter, direct connect 125 A 42

A9MEM3310 iEM3310 energy meter with pulse output 42

A9MEM3335 iEM3335 advanced multi-tariff energy meter &

electrical parameter plus M-Bus comm port

A9MEM3350 iEM3350 energy meter & electrical parameter

plus Modbus RS485 comm port

A9MEM3355 iEM3355 advanced multi-tariff energy meter &

electrical parameter plus Modbus RS485 comm port

A9MEM3365 iEM3365 advanced multi-tariff energy meter &

electrical parameter plus BACnet MS/TP comm port

A9MEM3375 iEM3375 advanced multi-tariff energy meter &

electrical parameter plus LON TP/FT-10 comm port

BCPMA042S 42 circuit BCPM 3/4" CT spacing - Advanced 48

BCPMA084S 84 circuit BCPM 3/4" CT spacing - Advanced 48

BCPMA142S 44 circuit BCPM 1" CT spacing - Advanced 48

BCPMA184S 84 circuit BCPM 1" CT spacing - Advanced 48

BCPMB042S 42 circuit BCPM 3/4" CT spacing - Intermediate 48

BCPMB084S 84 circuit BCPM 3/4" CT spacing - Intermediate 48

BCPMB142S 42 circuit BCPM 3/4" CT spacing - Intermediate 48

BCPMB184S 84 circuit BCPM 1" CT spacing - Intermediate 48

BCPMC042S 42 circuit BCPM 3/4" CT spacing - Basic 48

BCPMC084S 84 circuit BCPM 3/4" CT spacing - Basic 48

BCPMC142S 42 circuit BCPM 1" CT spacing - Basic 48

BCPMC184S 84 circuit BCPM 1" CT spacing - Basic 48

BCPMCOVERS Circuit board cover BCPM 48

BCPMSCA30S 30 split-core CTs, Advanced BCPM 48

BCPMSCA42S 42 split-core CTs, Advanced BCPM 48

BCPMSCA60S 60 split-core CTs, Advanced BCPM 48

BCPMSCA84S 84 split-core CTs, Advanced BCPM 48

BCPMSCADPBS

Adapter bord, for split core BCPM 48

BCPMSCB30S 30 split-core CTs, Intermediate BCPM 48

BCPMSCB42S 42 split-core CTs, Intermediate BCPM 48

BCPMSCB60S 60 split-core CTs, Intermediate BCPM 48

BCPMSCB84S 84 split-core CTs, Intermediate BCPM 48

14 PLSED309005EN

Index of catalogue numbers

(cont.)

BCPMSCC30S 30 split-core CTs, Basic BCPM 48

BCPMSCC42S 42 split-core CTs, Basic BCPM 48

BCPMSCC60S 60 split-core CTs, Basic BCPM 48

BCPMSCC84S 84 split-core CTs, Basic BCPM 48

BCPMSCCT0 Split core CTs, BCPM 50 A 50

BCPMSCCT0R20

Split core CTs, BCPM 50 A 50

BCPMSCCT1 Split core CTs, BCPM 100 A 50

BCPMSCCT1R20

Split core CTs, BCPM 100 A 50

BCPMSCCT3 Split core CTs, BCPM 200 A 50

BCPMSCCT3R20

Split core CTs, BCPM 200 A 50

CAB4 PM/CM <-> display connection cable (1.25 m) 87

CAB12 PM/CM <-> display connection cable (3.65 m) 87

CAB30 PM/CM <-> display connection cable (9.14 m) 87

CBL008 Fiat Ribbon cable for BCPM 50

CBL016

Fiat Ribbon cable for BCPM 50

CBL017 Fiat Ribbon cable for BCPM 50

CBL018 Fiat Ribbon cable for BCPM 50

CBL019 Fiat Ribbon cable for BCPM 50

CBL020

Fiat Ribbon cable for BCPM 50

CBL021 Fiat Ribbon cable for BCPM 50

CBL022 Round Ribbon cable for BCPM 50

CBL023 Round Ribbon cable for BCPM 50

CBL024 Round Ribbon cable for BCPM 50

CM4MA Mounting adaptor for CM4000T 107

EBX200 Com'X 200 Ethernet data logger 132

EBXA-USB-WIFI

Com'X 200 WiFi USB stick 132

EBXA-GPRS-SIM

Com'X 200 GPRS modem with SIM card 132

EBXA-GPRS Com'X 200 GPRS modem without SIM card 132

EBXA-ANT-5M Com'X 200 External GPRS antenna 132

EGX100MG EGX100 Ethernet gateway 137

EGX100SD EGX100 Ethernet gateway 137

EGX300 EGX300 Ethernet server 139

LVCT00102S

100 A 50

LVCT00202S

200 A 50

LVCT00302S

300 A 50

LVCT00403S

400 A 50

LVCT00603S

600 A 50

LVCT00803S

800 A 50

LVCT00804S

800 A 50

LVCT01004S

1000 A 50

LVCT01204S

1200 A 50

LVCT01604S

1600 A 50

LVCT02004S

2000 A 50

LVCT02404S

2400 A 50

M7550 ION7550 energy and power quality meter 100

M7650 ION7650 energy and power quality meter 100

M765RD ION7550 remote display 100

M765RDPS ION7550 remote display with power supply 100

M8650A ION8650A energy and power quality meter 114

M8650B ION8650B energy and power quality meter 114

M8650C ION8650C energy and power quality meter 114

M8800A ION8800A energy and power quality meter 122

M8800B ION8800B energy and power quality meter 122

M8800C ION8800C energy and power quality meter 122

METSECT5CC004

Type C - CT (cable prole) 40A 18

METSECT5CC005

Type C - CT (cable prole) 50A 18

METSECT5CC006

Type C - CT (cable prole) 60A 18

METSECT5CC008

Type C - CT (cable prole) 75A 18

METSECT5CC010

Type C - CT (cable prole) 100A 18

METSECT5CC013

Type C - CT (cable prole) 125A 18

METSECT5CC015

Type C - CT (cable prole) 150A 18

METSECT5CC020

Type C - CT (cable prole) 200A 18

METSECT5CC025

Type C - CT (cable prole) 250A 18

METSECT5ME015

Type ME - CT (mixed: cable/bar prole) 150A 18

METSECT5ME020

Type ME - CT (mixed: cable/bar prole) 200A 18

METSECT5ME025

Type ME - CT (mixed: cable/bar prole) 250A 18

METSECT5ME030

Type ME - CT (mixed: cable/bar prole) 300A 18

METSECT5ME040

Type ME - CT (mixed: cable/bar prole) 400A 18

METSECT5ME050

Type ME - CT (mixed: cable/bar prole) 500A 18

METSECT5ME060

Type ME - CT (mixed: cable/bar prole) 600A 18

METSECT5MB025

Type MB - CT (mixed: cable/bar prole) 250A 18

METSECT5MB030

Type MB- CT (mixed: cable/bar prole) 300A 18

METSECT5MB040

Type MB - CT (mixed: cable/bar prole) 400A 18

METSECT5MA015

Type MA - CT (mixed: cable/bar prole) 150A 18

METSECT5MA020

Type MA - CT (mixed: cable/bar prole) 200A 18

METSECT5MA025

Type MA - CT (mixed: cable/bar prole) 250A 18

METSECT5MA030

Type MA - CT (mixed: cable/bar prole) 300A 18

METSECT5MA040

Type MA - CT (mixed: cable/bar prole) 400A 18

METSECT5MC025

Type MC - CT (mixed: cable/bar prole) 250A 18

METSECT5MC030

Type MC - CT (mixed: cable/bar prole) 300A 18

METSECT5MC040

Type MC - CT (mixed: cable/bar prole) 400A 18

METSECT5MC050

Type MC - CT (mixed: cable/bar prole) 500A 18

METSECT5MC060

Type MC - CT (mixed: cable/bar prole) 600A 18

METSECT5MC080

Type MC - CT (mixed: cable/bar prole) 800A 18

METSECT5MF025

Type MF - CT (mixed: cable/bar prole) 250A 18

METSECT5MF030

Type MF - CT (mixed: cable/bar prole) 300A 18

METSECT5MF040

Type MF - CT (mixed: cable/bar prole) 400A 18

METSECT5MF050

Type MF - CT (mixed: cable/bar prole) 500A 18

METSECT5MD050

Type MD - CT (mixed: cable/bar prole) 500A 18

METSECT5MD060

Type MD - CT (mixed: cable/bar prole) 600A 18

METSECT5MD080

Type MD - CT (mixed: cable/bar prole) 800A 18

METSECT5CYL1

Accessory cylinder 1 19

METSECT5COVER

Sealable cover 19

METSECT5CYL2

Accessory cylinder 2 19

METSECT5VF050

Type VF CT (vertical bar prole) 500A 20

METSECT5VF060

Type VF CT (vertical bar prole) 600A 20

METSECT5VV500

Type VV CT (vertical bar prole) 5000A 20

METSECT5VV600

Type VV CT (vertical bar prole) 6000A 20

METSECT5DA020

Type DA - CT (vertical or horizontal bar - dual secondary

terminals) 200A

METSECT5DA025

Type DA - CT (vertical or horizontal bar - dual secondary

terminals) 250A

METSECT5DA030

Type DA - CT (vertical or horizontal bar - dual secondary

terminals) 300A

METSECT5DA040

Type DA - CT (vertical or horizontal bar - dual secondary

terminals) 400A

METSECT5DA050

Type DA - CT (vertical or horizontal bar - dual secondary

terminals) 500A

METSECT5DA060

Type DA - CT (vertical or horizontal bar - dual secondary

terminals) 600A

METSECT5DA080

Type DA - CT (vertical or horizontal bar - dual secondary

terminals) 800A

METSECT5DA100

Type DA - CT (vertical or horizontal bar - dual secondary

terminals) 1000A

METSECT5DA125

Type DA - CT (vertical or horizontal bar - dual secondary

terminals) 1250A

METSECT5DA150

Type DA - CT (vertical or horizontal bar - dual secondary

terminals) 1500A

METSECT5DB100

Type DB - CT (vertical or horizontal bar - dual secondary

terminals) 1000A

METSECT5DB125

Type DB - CT (vertical or horizontal bar - dual secondary

terminals) 1250A

METSECT5DB150

Type DB - CT (vertical or horizontal bar - dual secondary

terminals) 1500A

METSECT5DB200

Type DB - CT (vertical or horizontal bar - dual secondary

terminals) 2000A

METSECT5DB250

Type DB - CT (vertical or horizontal bar - dual secondary

terminals) 2500A

METSECT5DB300

Type DB - CT (vertical or horizontal bar - dual secondary

terminals) 3000A

METSECT5DC200

Type DC - CT (vertical or horizontal bar - dual secondary

terminals) 2000A

METSECT5DC250

Type DC - CT (vertical or horizontal bar - dual secondary

terminals) 2500A

METSECT5DC300

Type DC - CT (vertical or horizontal bar - dual secondary

terminals) 3000A

METSECT5DC400

Type DC - CT (vertical or horizontal bar - dual secondary

terminals) 4000A

Index of catalogue numbers

(cont.)

PLSED309005EN

Index of catalogue numbers

METSECT5DD100

Type DD - CT (vertical or horizontal bar - dual secondary

terminals) 1000A

METSECT5DD125

Type DD - CT (vertical or horizontal bar - dual secondary

terminals) 1250A

METSECT5DD150

Type DD - CT (vertical or horizontal bar - dual secondary

terminals) 1500A

METSECT5DE100

Type DE - CT (vertical or horizontal bar - dual secondary

terminals) 1000A

METSECT5DE125

Type DE - CT (vertical or horizontal bar - dual secondary

terminals) 1250A

METSECT5DE150

Type DE - CT (vertical or horizontal bar - dual secondary

terminals) 1500A

METSECT5DE200

Type DE - CT (vertical or horizontal bar - dual secondary

terminals) 2000A

METSECT5DH125

Type DH - CT (vertical or horizontal bar - dual secondary

terminals) 1250A

METSECT5DH150

Type DH - CT (vertical or horizontal bar - dual secondary

terminals) 1500A

METSECT5DH200

Type DH - CT (vertical or horizontal bar - dual secondary

terminals) 2000A

METSEEM480525

PowerLogic E4800 multi-circuit energy meter 58

METSEEM488025

PowerLogic E4800 multi-circuit energy meter 58

METSEEM480516

PowerLogic E4800 multi-circuit energy meter 58

METSEEM488016

PowerLogic E4800 multi-circuit energy meter 58

METSEEM480526

PowerLogic E4800 multi-circuit energy meter 58

METSEEM488026

PowerLogic E4800 multi-circuit energy meter 58

METSEPM3200 PM3200 basic power meter 61

METSEPM3210 PM3210 power meter with pulse output 61

METSEPM3250 PM3250 power meter with RS485 port 61

METSEPM3255 PM3255 power meter with 2 DI, 2 DO, RS485 port 61

METSEPM5100 PM5100 power meter 78

METSEPM5110 PM5110 power meter 78

METSEPM5111 PM5111 power meter 78

METSEPM5310 PM5310 power meter 78

METSEPM5320 PM5320 power meter 78

METSEPM5330 PM5330 power meter 78

METSEPM5331 PM5331 power meter 78

METSEPM5340 PM5340 power meter 78

METSEPM5341 PM5341 power meter 78

METSEPM5350 PM5350 power meter 78

METSEPM5560 PM5560 power meter 78

METSEPM5561 PM5561 power meter 78

METSEPM5563 PM5563 power meter 78

METSEPM8240 Panel mount meter 95

METSEPM8243 DIN rail mount meter 95

METSEPM8244 DIN rail mount meter + Remote display 95

METSEPM89RD96 display, 3 M cable, mounting hardware for 30mm hole 95

METSEPM8000SK Terminal covers and sealing instructions 95

METSEPMAK Adapters for mounting meter and RMD back to back 95

METSECAB1 Display Cable, 1 metre 95

METSECAB3 Display Cable, 3 metres 95

METSECAB10 Display Cable, 10 metres 95

METSEPM89M2600 I/O module, 6 self-wetted digital inputs & 2 Form-C

relay outputs

METSEPM89M0024 I/O module, 4 analogue inputs, 2 analogue outputs 95

OPTICAL-PROBE

Optical communication interface 119

PM810LOG Optional logging module for on-board data recording

for PM810

PM810MG PM810 Power Meter with integrated display 86

PM810RDMG Meter and remote display kit 86

PM810UMG PM810 Power Meter without display 86

PM820MG PM820 Power Meter with integrated display 86

PM820RDMG Meter and remote display kit 86

PM820UMG PM820 Power Meter without display 86

PM850MG PM850 Power Meter with integrated display 86

PM850RDMG Meter and remote display kit 86

PM850UMG PM850 Power Meter without display 86

PM870MG PM870 Power Meter with integrated display 86

PM870RDMG Meter and remote display kit 86

PM870UMG PM870 Power Meter without display 86

PM8ECC PM8ECC module for PM Series 800 87

PM8M22 PM8M22 module for PM Series 800 87

PM8M26 PM8M26 module for PM Series 800 87

PM8M2222 PM8M2222 module for PM Series 800 87

PM8RDA Remote display and adapter alone 86

PM8RDMG Remote display and adapter with a 3.55 m cable 86

RJ11EXT RJ11 Extender kit to mount RJ11 jack in panel door

16 PLSED309005EN

CT current transformers

Ip/5 A ratio

Current transformers

The Ip/5A ratio current transformer delivers at the secondary a current (Is) of 0 to 5 A

that is proportional to the current measured at the primary (Ip).

This allows them to be used in combination with measurement equipment:

b Ammeters.

b Kilowatt-hour meters.

b Measurement units.

b Control relays.

b etc.

When the primary is energized, the measurement equipment nearly acts as a short

circuit which keeps the secondary voltage very low. This voltage will increases

signicantly if the short circuit is removed.

CT selection - conductor rating aspects

The choice depends on the conductor prole and the maximum intensity

of the primary circuit.

CT with let-through primary

Conductor type Cable Mixed, bars or cables Vertical or horizontal bars Vertical bars

Suggested

Current

Transformer

and mounting

DB415986.eps

DB415920.eps

DB415988.eps

DB415989.eps

DB415921.eps

DB415987.eps

Ratings (A) 40 to 250 150 to 800 200 to 4000 500 to 600 5000 to 6000

CT internal

prole

Type C Type M Type D (1) Type V

VF VV

(1) Two secondary connectors (parallel internal wiring - only one secondary winding) for easier

cable access. 1 lateral + 1 on one extremity. Warning: only one must be used at a time.

Specific mounting: use of cylinder

A cylindrical metallic spacer ensures a proper CT positioning when the conductor or

the CT cannot be positioned perpendicular. Secured by bolt + nut.

CT with primary connection by screw and nut

(example: use of cylinder with bar or cable)

DB416006.eps

DB416005.eps

16550 (brass) METSECT5CYL1 (aluminium)

Ip Is

Primary

circuit

Secondary

circuit

Measurement

equipment

Load

DB416186.eps

Application diagram of a CT.

PLSED309005EN

CT current transformers (cont.)

Ip/5 A ratio

Current transformers

CT selection - Electrical aspect Ip/5 A

b We recommend that you choose the ratio immediately higher than the maximum

measured current (In).

Example:

In = 1103 A; ratio chosen = 1250/5.

b For small ratings:

from 40/5 to 75/5 and for an application with digital devices, we recommend

that you choose a higher rating, for example 100/5.

This is because small ratings are less accurate and the 40 A measurement,

for example, will be more accurate with a 100/5 CT than with a 40/5 CT.

b Specic case of the motor starter:

to measure motor starter current, you must choose a CT with primary current

Ip = Id/2 (Id = motor starting current).

Validation of measurement solution according

accuracy class

It consists in controlling the right adaptation of the CT on the assucary class aspect.

The accuracy class is specied in the project. The total dissipated power of the

measurement circuit (meter + cables) should not be superior to the specied limit of

the CT. This limit is for different standard classes. If necessary, the choice of the

cable section, the CT or meter should be modify to t the requirement.

Copper cable

cross-section

(mm2)

Power per doubled

meter at 20 °C

(VA)

Schneider Electric

device

Consumption of

the current input

(VA)

Ammeter

72 x 72 / 96 x 96

1.1

Analogue ammeter 1.1

Digital ammeter 0.3

PM700, PM800 0.15

PM3000 0.3

1.5 0.685

2.5 0.41

40.254

60.169

10 0.0975

16 0.062

For each temperature variation per 10 °C

bracket, the power drawn up by the cables

increases by 4 %.

Application example

Project specication: 200 A, in Ø27 mm cable, accuracy class 1.

Our choice is METSECT5MA020.

For this CT selected on the chart (next page), the max acceptable power is 7 VA (for

"Accuracy class 1" which is specied in the project).

Internal

prole

type

Cables

(mm)

Bars

(mm)

Rating

Ip/5 A

(A)

Cat. no. Accuracy class

0.5 1 3

Max. power (VA)

Ø27 10 x 32

15 x 25

150 METSECT5MA015 34-

200 METSECT5MA020 47-

250 METSECT5MA025 68-

300 METSECT5MA030 8 10 -

400 METSECT5MA040 10 12 -

Control of the conformity of the measurement chain:

b PM3000 multi-meter: 0.3 VA.

b 4 meters of 2.5 mm2, doubled wires: 0.41 x 4 = 1.64 VA.

Total: 0.3 + 1.64 = 1.94 VA (< 7 VA)

Conclusion: this CT is well adapted as the accuracy class will be even better than 1.

18 PLSED309005EN

Current transformers CT,

Ip/5 A ratio

Catalogue numbers

Presentation of catalogue numbers

First digit = secondary rating,

Examples:

b METSECT5CC008 = 5 A secondary, Cables only, 75 A primary

b METSECT5MC080 = 5 A secondary, Mixed for cables and bars, 800 A primary.

PB112446.eps

METSECT5CCppp

PB112464.eps

PB112461.eps

METSECT5MEppp METSECT5MBppp

PB112460.eps

PB112462.eps

METSECT5MAppp METSECT5MCppp

PB112465.eps

PB112463.eps

METSECT5MFppp METSECT5MDppp

MET SE CT R FF XXX

Type C - current transformer (cable prole)

Internal prole

type

Cables

(mm)

Bars

(mm)

Rating

Ip/5 A

(A)

Cat. no. Accuracy class Overall dimensions

(refer to drawing

pages for details)

W x H x D

(mm)

Fastening mode Accessories

0.5 1 3 Cylinder Sealable cover

Max. power (VA)

Ø21 - 40 METSECT5CC004 --144 x 66 x 37 b Adapter for DIN rails.

b Mounting plate.

16550

METSECT5CYL1

Included

50 METSECT5CC005 - 1.25 1.5

60 METSECT5CC006 - 1.25 2

75 METSECT5CC008 - 1.5 2.5

100 METSECT5CC010 2 2.5 3.5

125 METSECT5CC013 2.5 3.5 4

150 METSECT5CC015 345

200 METSECT5CC020 4 5.5 6

250 METSECT5CC025 567

Type M - current transformers (mixed: cable/bar prole)

Ø22 10 x 30

11 x 25

12 x 20

150 METSECT5ME015 1.5 5.5 6.5 56 x 84 x 60 b Adapter for DIN rails.

b Mounting plate.

b Insulated locking screw.

16551 16552

200 METSECT5ME020 4 7 8.5

250 METSECT5ME025 6911

300 METSECT5ME030 7.5 11 14

400 METSECT5ME040 10.5 15 18

500 METSECT5ME050 12 18 22

600 METSECT5ME060 14.5 21.5 26

Ø26 12 x 40

15 x 32

250 METSECT5MB025 34- 60 x 85 x 63 b Adapter for DIN rails.

b Mounting plate.

- METSECT5COVER

300 METSECT5MB030 46-

400 METSECT5MB040 68-

Ø27 10 x 32

15 x 25

150 METSECT5MA015 34- 56 x 80 x 63 b Adapter for DIN rails.

b Mounting plate.

METSECT5CYL2 METSECT5COVER

200 METSECT5MA020 47-

250 METSECT5MA025 68-

300 METSECT5MA030 8 10 -

400 METSECT5MA040 10 12 -

Ø32 10 x 40

20 x 32

25 x 25

250 METSECT5MC025 35- 70 x 95 x 65 b Adapter for DIN rails.

b Mounting plate.

- METSECT5COVER

300 METSECT5MC030 58-

400 METSECT5MC040 8 10 -

500 METSECT5MC050 10 12 -

600 METSECT5MC060 12 15 -

800 METSECT5MC080 10 12 -

Ø35 10 x 40 250 METSECT5MF025 2.5 5 8 77 x 107 x 64 b Adapter for DIN rails.

b Mounting plate.

b Insulated locking screw.

- 16553

300 METSECT5MF030 4 8 12

400 METSECT5MF040 8 12 15

500 METSECT5MF050 10 12 15

PLSED309005EN

Type C - current transformer (cable prole)

Internal prole

type

Cables

(mm)

Bars

(mm)

Rating

Ip/5 A

(A)

Cat. no. Accuracy class Overall dimensions

(refer to drawing

pages for details)

W x H x D

(mm)

Fastening mode Accessories

0.5 1 3 Cylinder Sealable cover

Max. power (VA)

Ø21 - 40 METSECT5CC004 --144 x 66 x 37 b Adapter for DIN rails.

b Mounting plate.

16550

METSECT5CYL1

Included

50 METSECT5CC005 - 1.25 1.5

60 METSECT5CC006 - 1.25 2

75 METSECT5CC008 - 1.5 2.5

100 METSECT5CC010 2 2.5 3.5

125 METSECT5CC013 2.5 3.5 4

150 METSECT5CC015 345

200 METSECT5CC020 4 5.5 6

250 METSECT5CC025 567

Type M - current transformers (mixed: cable/bar prole)

Ø22 10 x 30

11 x 25

12 x 20

150 METSECT5ME015 1.5 5.5 6.5 56 x 84 x 60 b Adapter for DIN rails.

b Mounting plate.

b Insulated locking screw.

16551 16552

200 METSECT5ME020 4 7 8.5

250 METSECT5ME025 6911

300 METSECT5ME030 7.5 11 14

400 METSECT5ME040 10.5 15 18

500 METSECT5ME050 12 18 22

600 METSECT5ME060 14.5 21.5 26

Ø26 12 x 40

15 x 32

250 METSECT5MB025 34- 60 x 85 x 63 b Adapter for DIN rails.

b Mounting plate.

- METSECT5COVER

300 METSECT5MB030 46-

400 METSECT5MB040 68-

Ø27 10 x 32

15 x 25

150 METSECT5MA015 34- 56 x 80 x 63 b Adapter for DIN rails.

b Mounting plate.

METSECT5CYL2 METSECT5COVER

200 METSECT5MA020 47-

250 METSECT5MA025 68-

300 METSECT5MA030 8 10 -

400 METSECT5MA040 10 12 -

Ø32 10 x 40

20 x 32

25 x 25

250 METSECT5MC025 35- 70 x 95 x 65 b Adapter for DIN rails.

b Mounting plate.

- METSECT5COVER

300 METSECT5MC030 58-

400 METSECT5MC040 8 10 -

500 METSECT5MC050 10 12 -

600 METSECT5MC060 12 15 -

800 METSECT5MC080 10 12 -

Ø35 10 x 40 250 METSECT5MF025 2.5 5 8 77 x 107 x 64 b Adapter for DIN rails.

b Mounting plate.

b Insulated locking screw.

- 16553

300 METSECT5MF030 4 8 12

400 METSECT5MF040 8 12 15

500 METSECT5MF050 10 12 15

Common characteristics

Secondary current Is (A) 5

Maximum voltage rating Ue (V) 720

Frequency (Hz) 50/60

Safety factor (sf) b 40 to 4000 A: sf y 5

b 5000 to 6000 A: sf y 10

Degree of protection IP20

Operating temperature b tropicalised range

b -25 °C to +60 °C (1)

b relative humidity > 95 %

Compliance with standards b IEC 61869-2

b VDE 0414

Secondary connection (as per model) b by terminals for lug

b by tunnel terminals

b by screws

(1) Warning: some products are limited to +50 °C.

DIN rail mounting.

DB415927.eps DB415926.eps

Mounting plate installation.

CT,

Ip/5 A ratio

Catalogue numbers

Current transformers

20 PLSED309005EN

Current transformers CT,

Ip/5 A ratio

Catalogue numbers

PB112466.eps

PB112467.eps

METSECT5VFppp METSECT5VVppp

PB112454.eps

PB112455.eps

METSECT5DAppp METSECT5DBppp

PB112456.eps

PB112457.eps

METSECT5DCppp METSECT5DDppp

PB112458.eps

PB112459.eps

METSECT5DEppp METSECT5DHppp

Type V current transformers (vertical bar prole)

Internal prole

type

Cables

(mm)

Bars

(mm)

Rating

Ip/5 A

(A)

Cat. no. Accuracy class Overall dimensions

(refer to drawing

pages for details)

W x H x D

(mm)

Fastening mode Accessories

0.5 1 3 Cylinder Sealable cover

Max. power

(VA)

-11 x 64

31 x 51

500 METSECT5VF050 24- 90 x 130 x 66 b Mounting plate.

b Insulated locking screw.

- Included

600 METSECT5VF060 46-

-55 x 165 5000 METSECT5VV500 g60 - - 175 x 273.5 x 110 b Insulated locking screw. - Included

6000 METSECT5VV600 g70 - -

Type D - current transformers

(vertical or horizontal bar - dual secondary terminals)

-32 x 65 200 METSECT5DA020 - 2590 x 94 x 90 b Insulated locking screw. - Included

250 METSECT5DA025 14-

300 METSECT5DA030 1.5 6 -

400 METSECT5DA040 48-

500 METSECT5DA050 8 10 -

600 METSECT5DA060 8 12 -

800 METSECT5DA080 12 15 -

1000 METSECT5DA100 15 20 -

1250 METSECT5DA125 g15 20 -

1500 METSECT5DA150 g20 25 -

-38 x 127 1000 METSECT5DB100 6 10 - 99 x 160 x 87 b Insulated locking screw. - Included

1250 METSECT5DB125 g8 12 -

1500 METSECT5DB150 g10 15 -

2000 METSECT5DB200 g15 20 -

2500 METSECT5DB250 g20 25 -

3000 METSECT5DB300 g25 30 -

-52 x 127 2000 METSECT5DC200 g25 30 - 125 x 160 x 87 b Insulated locking screw. - Included

2500 METSECT5DC250 g30 50 -

3000 METSECT5DC300 g30 50 -

4000 METSECT5DC400 g30 50 -

-34 x 84 1000 METSECT5DD100 10 15 - 96 x 116 x 87 b Insulated locking screw. - Included

1250 METSECT5DD125 g12 15 -

1500 METSECT5DD150 g15 20 -

-54 x 102 1000 METSECT5DE100 12 15 - 135 x 129 x 85 b Insulated locking screw. - Included

1250 METSECT5DE125 g15 20 -

1500 METSECT5DE150 g20 25 -

2000 METSECT5DE200 g20 25 -

-38 x 102 1250 METSECT5DH125 g12 15 - 98 x 129 x 75 b Insulated locking screw. - Included

1500 METSECT5DH150 g12 15 -

2000 METSECT5DH200 g20 25 -

g Operating temperature: -25 °C to +50 °C.

PLSED309005EN

Type V current transformers (vertical bar prole)

Internal prole

type

Cables

(mm)

Bars

(mm)

Rating

Ip/5 A

(A)

Cat. no. Accuracy class Overall dimensions

(refer to drawing

pages for details)

W x H x D

(mm)

Fastening mode Accessories

0.5 1 3 Cylinder Sealable cover

Max. power

(VA)

-11 x 64

31 x 51

500 METSECT5VF050 24- 90 x 130 x 66 b Mounting plate.

b Insulated locking screw.

- Included

600 METSECT5VF060 46-

-55 x 165 5000 METSECT5VV500 g60 - - 175 x 273.5 x 110 b Insulated locking screw. - Included

6000 METSECT5VV600 g70 - -

Type D - current transformers

(vertical or horizontal bar - dual secondary terminals)

-32 x 65 200 METSECT5DA020 - 2590 x 94 x 90 b Insulated locking screw. - Included

250 METSECT5DA025 14-

300 METSECT5DA030 1.5 6 -

400 METSECT5DA040 48-

500 METSECT5DA050 8 10 -

600 METSECT5DA060 8 12 -

800 METSECT5DA080 12 15 -

1000 METSECT5DA100 15 20 -

1250 METSECT5DA125 g15 20 -

1500 METSECT5DA150 g20 25 -

-38 x 127 1000 METSECT5DB100 6 10 - 99 x 160 x 87 b Insulated locking screw. - Included

1250 METSECT5DB125 g8 12 -

1500 METSECT5DB150 g10 15 -

2000 METSECT5DB200 g15 20 -

2500 METSECT5DB250 g20 25 -

3000 METSECT5DB300 g25 30 -

-52 x 127 2000 METSECT5DC200 g25 30 - 125 x 160 x 87 b Insulated locking screw. - Included

2500 METSECT5DC250 g30 50 -

3000 METSECT5DC300 g30 50 -

4000 METSECT5DC400 g30 50 -

-34 x 84 1000 METSECT5DD100 10 15 - 96 x 116 x 87 b Insulated locking screw. - Included

1250 METSECT5DD125 g12 15 -

1500 METSECT5DD150 g15 20 -

-54 x 102 1000 METSECT5DE100 12 15 - 135 x 129 x 85 b Insulated locking screw. - Included

1250 METSECT5DE125 g15 20 -

1500 METSECT5DE150 g20 25 -

2000 METSECT5DE200 g20 25 -

-38 x 102 1250 METSECT5DH125 g12 15 - 98 x 129 x 75 b Insulated locking screw. - Included

1500 METSECT5DH150 g12 15 -

2000 METSECT5DH200 g20 25 -

g Operating temperature: -25 °C to +50 °C.

CT,

Ip/5 A ratio

Catalogue numbers

Current transformers

22 PLSED309005EN

CT current transformers (cont.)

Ip/5 A ratio

Current transformers

CT current transformers

CC internal prole type ME internal prole type MB internal prole type

Ø21

27.5

DB416965.eps

Ø22 84

DB415934.eps

Ø26 85

33.5

DB415923.eps

MA internal prole type MC internal prole type MF internal prole type

Ø27 80

30.5

DB415922.eps

DB415939.eps

40.5

Ø35

107

DB415935.eps

MD internal prole type DA internal prole type

Ø40

DB416966.eps

DB415932.eps

DB internal prole type DC internal prole type

160

127

DB416967.eps

160

127

125

DB416968.eps

PLSED309005EN

CT current transformers (cont.)

Ip/5 A ratio

Current transformers

CT current transformers

DD internal prole type DE internal prole type

116

DB416969.eps

129

103

135

DB416970.eps

DH internal prole type

129

103

DB416971.eps

VV internal prole type VF internal prole type

110

242

165

175

273.5

DB416972.eps

113

130

DB416973.eps

24 PLSED309005EN

Cylinders

METSECT5CYL1 METSECT5CYL2

Ø 21.5

21.5

DB416004.eps

M10

Ø 26

26.5

DB416002.eps

Aluminium Aluminium

16550 16551

Ø 8.5

Ø 22 32

22.5

DB416082.eps

Ø 12.5

Ø 22.5 63

22.5

DB416000.eps

Brass Brass

Covers

16552

82 58

DB415996.eps

16553

61 54.5

DB415998.eps

METSECT5COVER

60.5

23.5

DB416008.eps

CT current transformers (cont.)

Ip/5 A ratio

Current transformers

Panel instruments

Function

iAMP

Ammeters measure the current owing through an electric circuit in amps.

iVLT

Voltmeters measure the potential (voltage) difference of an electric circuit in volts.

Common technical data

bAccuracy: class 1.5.

b Complies with standards IEC 60051-1, IEC 61010-1 and IEC 61000-4.

b Ferromagnetic device.

b Pseudo-linear scale over 90°.

b Ammeters (except catalogue number 16029):

v connection on CT, ratio In/5, to be ordered separately

v interchangeable dials.

b Temperature:

v operating temperature: -25 °C to +55 °C.

v reference temperature: 23 °C.

b Inuence of temperature on accuracy: ±0.03 % / °C.

b Utilisation frequency: 50/60 Hz.

b Consumption:

v AMP: 1.1 VA

v VLT catalogue number 15060: 2.5 VA

v VLT catalogue number 16061: 3.5 VA.

b Permanent overload:

v AMP: 1.2 In

v VLT: 1.2 Un.

b Maximum overload for 5 s:

v AMP: 10 In

v VLT: 2 Un.

b Connection: tunnel terminals for 1.5 to 6 mm2 rigid cables.

Catalogue numbers

Type Scale Connection

with CT

Width in mod.

of 9 mm

Cat. no.

iAMP with direct connection

0-30 A no 8 16029

iAMP with connection on CT

Basic device

(delivered without dial)

X/5 8 16030

Dial 0-5 A 16031

0-50 A 50/5 16032

0-75 A 75/5 16033

0-100 A 100/5 16034

0-150 A 150/5 16035

0-200 A 200/5 16036

0-250 A 250/5 16037

0-300 A 300/5 16038

0-400 A 400/5 16039

0-500 A 500/5 16040

0-600 A 600/5 16041

0-800 A 800/5 16042

0-1000 A 1000/5 16043

0-1500 A 1500/5 16044

0-2000 A 2000/5 16045

iVLT

0-300 V 816060

0-500 V 816061

DB119006

iAMP.

DB119005

iVLT.

DIN rail analogue ammeters and

voltmeters

PLSED309005EN

Panel instruments

Function

iAMP

Ammeters measure in amps the current owing through an electric circuit.

iVLT

Voltmeters measure in volts the potential (voltage) difference of an electric circuit.

iFRE

The frequency meter measures in hertz the frequency of an electric circuit from 20 to

600 V AC.

Common technical data

b Supply voltage: 230 V.

bOperating frequency: 50/60 Hz.

bDisplay by red LED: 3 digits, h = 8 mm.

bAccuracy at full-scale : 0.5 % ±1 digit.

bConsumption: max. 5 VA or rated 2.5 VA.

b Degree of protection:

v IP40 on front face

v IP20 at terminal level.

bConnection: tunnel terminals for 2.5 mm2 cables.

Specic data

10 A direct reading ammeter

bMinimum value measured: 4 % of rating.

bMeasurement input consumption: 1 VA.

Multi-rating ammeter

bRatings:

v in direct reading: 5 A

v by CT (not supplied) congurable on the front face of the ammeter: 10, 15, 20, 25,

40, 50, 60, 100, 150, 200, 250, 400, 500, 600, 800, 1000, 1500, 2000, 2500, 4000,

5000 A.

bMinimum value measured: 4% of rating.

bMeasurement input consumption: 0.55 VA.

Voltmeter

bDirect measurement: 0...600 V.

bInput impedance: 2 MW.

bMinimum value measured: 4 % of rating.

Frequency meter

bMinimum value measured: 20 Hz.

bMaximum value measured: 100 Hz.

bFull-scale display: 99.9 Hz.

Compliance with standards

bSafety: IEC/EN 61010-1.

bEMC electromagnetic compatibility: IEC/EN 65081-1 and IEC/EN 65082-2.

Catalogue numbers

Type Scale Connection

with CT

Width in mod.

of 9 mm

Cat. no.

Direct reading iAMP

0-10 A No 4 15202

Multi-rating iAMP

0-5000 A As per rating 415209

iVLT

0-600 V 415201

iFRE

20-100 Hz 415208

PB112024

iAMP.

PB112023

iVLT.

PB112025

iFRE.

DIN rail digital ammeters,

voltmeter and frequency meter

26 PLSED309005EN

Function

The 72 x 72 measurement devices are designed for ush-mounted installation on

doors, wicket doors and front plates of enclosures and cubicles.

AMP

The ammeters measure in amps the current owing through an electrical circuit.

VLT

The voltmeter measure in volts the potential difference (voltage) of an electrical

circuit.

Common technical data

b Accuracy: class 1.5.

b Compliance with standard IEC 60051-1, IEC 61010-1 and IEC 61000-4.

b Ferromagnetic device.

b Scale length: 62 mm over 90°.

b Mounting in enclosure or in cubicle.

b Degree of protection: IP52.

b Maximum operating position: 30° / vertical.

b Temperature:

v operation: -25 °C to +50 °C

v reference: 23 °C.

b Inuence of temperature on accuracy: ±0.003 % / °C.

b Utilisation frequency: 50/60 Hz.

AMP specic technical data

b Needs a In/5 CT to be ordered separately.

b Interchangeable dials to be ordered separately.

b Consumption: 1.1 VA.

b Permanent overload: 1.2 In.

b Maximum overload for 5 s: 10 In.

VLT specic technical data

b Consumption: 3 VA.

b Permanent overload: 1.2 Un.

b Maximum overload for 5 s: 2 Un.

Catalogue numbers

Type Scale Connection

on CT

Cat. no.

AMP for standard feeder

Basic device (delivered without dial) X/5 16004

1.3 In dial 0-50 A 50/5 16009

0-100 A 100/5 16010

0-200 A 200/5 16011

0-400 A 400/5 16012

0-600 A 600/5 16013

0-1000 A 1000/5 16014

0-1250 A 1250/5 16015

0-1500 A 1500/5 16016

0-2000 A 2000/5 16019

AMP for motor feeder

Basic device (delivered without dial) X/5 16003

3 In dial 0-30-90 A 30/5 16006

0-75-225 A 75/5 16007

0-200-600 A 200/5 16008

VLT

0-500 V 16005

PB101118-30_c

AMP for standard feeder.

PB101119-30_c

AMP for motor feeder.

PB101116-30_c

VLT.

Panel instruments 72 x 72 analogue ammeters and

voltmeter

PLSED309005EN

28 PLSED309005EN

Function

The 96 x 96 measurement devices are designed for ush-mounted installation on

doors, wicket doors and front plates of enclosures and cubicles.

AMP

The ammeters measure in amps the current owing through an electrical circuit.

VLT

The voltmeter measure in volts the potential difference (voltage) of an electrical

circuit.

Common technical data

b Accuracy: class 1.5.

b Compliance with standard IEC 60051-1, IEC 61010-1 and IEC 61000-4.

b Ferromagnetic device.

b Scale length: 80 mm over 90°.

b Mounting in enclosure or in cubicle.

b Degree of protection: IP52.

b Maximum operating position: 30° / vertical.

b Temperature:

v operation: -25 °C to +50 °C

v reference: 23 °C.

b Inuence of temperature on accuracy: ±0.003 % / °C.

b Utilisation frequency: 50/60 Hz.

AMP specic technical data

b Needs a In/5 CT to be ordered separately.

b Interchangeable dials to be ordered separately.

b Consumption: 1.1 VA.

b Permanent overload: 1.2 In.

b Maximum overload for 5 s: 10 In.

VLT specic technical data

b Consumption: 3 VA.

b Permanent overload: 1.2 Un.

b Maximum overload for 5 s: 2 Un.

Catalogue numbers

Type Scale Connection

on CT

Cat. no.

AMP for standard feeder

Basic device (delivered without dial) X/5 16074

1.3 In dial 0-50 A 50/5 16079

0-100 A 100/5 16080

0-200 A 200/5 16081

0-400 A 400/5 16082

0-600 A 600/5 16083

0-1000 A 1000/5 16084

0-1250 A 1250/5 16085

0-1500 A 1500/5 16086

0-2000 A 2000/5 16087

0-2500 A 2500/5 16088

0-3000 A 3000/5 16089

0-4000 A 4000/5 16090

0-5000 A 5000/5 16091

0-6000 A 6000/5 16092

AMP for motor feeder

Basic device (delivered without dial) X/5 16073

3 In dial 0-30-90 A 30/5 16076

0-75-225 A 75/5 16077

0-200-600 A 200/5 16078

VLT

0-500 V 16075

PB101118-40_c

AMP for standard feeder.

PB101119-40_c

AMP for motor feeder.

PB101116-40_c

VLT.

Panel instruments 96 x 96 analogue ammeters and

voltmeter

PLSED309005EN

Panel instruments

Function

The 48 x 48 selector switches are designed for ush-mounted installation on doors,

wicket doors and front plates of enclosures and cubicles.

CMA

The ammeter selector switch uses a single ammeter (by means of current

transformers) for successive measurement of the currents of a three-phase circuit.

CMV

The voltmeter selector switch uses a single voltmeter for successive measurement

of the voltages (phase-to-phase and phase-to-neutral) of a three-phase circuit.

Common technical data

b Durability:

v electrical: 100 000 operations

v mechanical: 2 000 000 operations.

b AgNi contact.

b Operating temperature: -25 °C to +50 °C.

b Compliance with standards IEC/EN 60947-3.

b Degree of protection:

v IP65 on front face

v IP20 at terminal level.

Catalogue numbers

Type Rating

(A)

Voltage

(V)

Number of

positions

Cat. no.

CMA 20 4 16017

CMV 500 7 16018

Connection

DB117274

CMA.

DB114275

CMV.

Reading 3 phase-to-earth voltages + 3 phase-to-phase voltages.

Note: when connecting do not remove the pre-cabling.

050740-25_c

CMA.

050741-25_c

CMV.

48 x 48 CMA and CMV

selector switches

30 PLSED309005EN

DIN rail iCMA and iCMV selector

switches

Panel instruments

Function

iCMA

This 4-position ammeter selector switch uses a single ammeter (using current

transformers) for successive measurement of the currents of a three-phase circuit.

iCMV

This 7-position voltmeter selector switch uses a single voltmeter for successive

measurement of voltages (phase-to-phase and phase-to-neutral) of a three-phase

circuit.

Common technical data

b Rotary handle.

b Maximum operating voltage: 440 V, 50/60 Hz.

b Nominal thermal current: 10 A.

b Operating temperature: -20°C to +55°C.

b Storage temperature: -25°C to +80°C.

b Mechanical durability (AC21A-3 x 440 V): 2 000 000 operations.

b Degree of protection:

v IP66 on front face

v IP20 at terminal level.

b Electrical durability: 1 000 000 operations.

b Connection: jumper terminals with captive screws, for cables up to 1.5 mm2.

b Complies with standards: IEC/EN 60947-3.

Catalogue numbers

Type Rating

(A)

Voltage

(V AC)

Width in

mod. of 9 mm

Cat. no.

iCMA 10 415 4 15126

iCMV 10 415 4 15125

Connection

DB114272

iCMA.

DB114273

iCMV.

PB107119

iCMA.

PB107118

iCMV.

PLSED309005EN

Function

Electromechanical counter that counts the operating hours of a machine or piece of

electrical equipment. Giving a precise indication of operating time, the counter is

used to decide when to carry out preventive maintenance.

Common technical data

b Electromechanical display.

b Maximum display: 99999.99 hours.

b Display accuracy: 0.01 %.

b Without reset.

b Storage temperature: -25 °C to +85 °C.

b Connection: tunnel terminals for 2.5 mm2 cable.

Specic technical data

iCH "DIN"

b Consumption: 0.15 VA.

b Operating temperature: -10 °C to +70 °C.

b Mounting on DIN rail.

CH "48 x 48"

b Consumption:

v 15607: 0.25 VA

v 15608: 0.15 VA

v 15609: 0.02 VA to 12 V and 0.3 VA to 36 V.

b Operating temperature: -20 °C to + 70 °C.

b Degree of protection: IP65 on front face.

b Mounting on front face of monitoring switchboards.

Catalogue numbers

Type Voltage

(V)

Width in mod.

of 9 mm

Cat. no.

iCH "DIN" 230 V AC ± 10%/50 Hz 415440

CH "48 x 48" 24 V AC ± 10%/50 Hz 15607

230 V AC ± 10%/50 Hz 15608

12 to 36 V DC 15609

Connection

DB114262

DB114263

iCH "DIN". CH "48 x 48".

PB112026

iCH "DIN".

DB119003

CH "48 x 48".

load load

Panel instruments iCH hour counters

32 PLSED309005EN

iCI impulse counter

Function

Electromechanical counter designed to count impulses emitted by: kilowatt hour

meters, temperature overrun detectors, people meters, speed meters, etc.

Common technical data

b Supply and metering voltage: 230 V AC ± 10%, 50/60 Hz.

b Consumption: 0.15 VA.

b Maximum display: 9 999 999 impulses.

b Without reset.

b Metering data:

v minimum impulse time: 50 ms

v minimum time between 2 impulses: 50 ms.

b Storage temperature: -25 °C to +85 °C.

b Operating temperature: -10 °C to +70 °C.

b Connection: tunnel terminals for 2.5 mm2 cable.

Catalogue number

Type Width in mod.

of 9 mm

Cat. no.

iCI 415443

Connection

DB114271

iCL.eps

iCI impulse counter

load

Panel instruments

PLSED309005EN

Dimensions

Ammeters, voltmeters, selector switches,

impulse counter, hour counters

Panel instruments

Analogue ammeters and voltmeters iAMP, iVLT

DB103473

Digital ammeters, voltmeter and frequency meter iAMP, iVLT

DB103474

iCMA and iCMV selector switches

DB103475

72 x 72 analogue ammeters and voltmeter

DB103476

96 x 96 analogue ammeters and voltmeter

DB103481

Protection cover

Capot de protection

Terminal

Protection cover

Capot de protection

Terminal

34 PLSED309005EN

Dimensions (cont.)

Ammeters, voltmeters, selector switches,

impulse counter, hour counters

Panel instruments

48 x 48 CMA and CMV selector switches

DB103477

iCI impulse counter and iCH hour counter

DB103479

48 x 48 CH hour counters

DB109825

3.2 (or 4.8)

24.1 (or 33)

22.3 (or 30.5)

(with adapter)

PLSED309005EN

Acti 9 iEM2000 Series

Energy Meters

Basic energy meters

The Acti 9 iEM2000 and iEM2100 Series Energy Meters offer a cost-attractive,

competitive range of single-phase DIN rail-mounted energy meters ideal for

sub-billing and cost allocation applications.

Combined with communication systems, like Smart Link, the Acti 9 iEM2000 Series

makes it easy to integrate electrical distribution measurements into customer’s energy

management systems. It’s the right energy meter at the right price for the right job.

Two versions are available: 40 A direct measure (iEM2000 models), and 63 A direct

measure (iEM2100 models). Within each set of models, there are different versions

to match the specic application, from basic to more advanced:

biEM2000T single-phase kilowatt-hour meter without display, with kWh pulse output.

biEM2000 single-phase kilowatt-hour meter, MID certied.

biEM2010 single-phase kilowatt-hour meter, kWh pulse output, MID certied.

biEM2100 single-phase kilowatt-hour meter.

biEM2105 single-phase kilowatt-hour meter, with partial counter, kWh pulse output.

biEM2110 single-phase kilowatt-hour meter, multi-tariffs with partial counter and

current, voltage, power measurement, pulse outputs, MID certied.

biEM2135 single-phase kilowatt-hour meter, multi-tariffs with partial counter and

current, voltage, power measurement. M-Bus communication, MID certied.

biEM2150 single-phase kilowatt-hour meter with partial counter and current,

voltage, power measurement. Modbus communication.

biEM2155 single-phase kilowatt-hour meter, multi-tariffs with partial counter and

current and voltage, power measurement. Modbus communication, MID certied.

Innovative design makes the meters smart and simple:

bEasy to install for panel builders.

bEasy to commission for contractors and installers.

bEasy to operate for end users.

Applications

bCost management applications.

bBill verication.

bSub-billing and cost allocation, including two tariffs.

Network management applications.

bBasic electrical parameters like current, voltage and power.

Market segments

bBuildings & Industry.

bData centres and networks.

bInfrastructure (airports, road tunnels, telecom).

Characteristics

bSelf-powered meters.

bCompliance with IEC 62053-21, IEC 62053-23, EN50470-3.

bCompact, 1 or 2 module width.

bOnboard Modbus or M-Bus communication.

bAnti-tamper security features ensure the integrity of your data.

bSingle phase circuit plus neutral.

bIP40 front panel and IP20 casing.

bOperating frequency 50/60 Hz.

bMID compliant (selected models) providing certied accuracy and data security.

PB110836

iEM2000T iEM2010

PB115002_1

PB115001

iEM2105 iEM2155

Meter model and description Current measurement Part number

iEM2000T basic energy meter, without display Direct connected to 40 A A9MEM2000T

iEM2000 basic energy meter, MID certied Direct connected to 40 A A9MEM2000

iEM2010 energy meter, kWh pulse output, MID certied Direct connected to 40 A A9MEM2010

iEM2100 basic energy meter Direct connected to 63 A A9MEM2100

iEM2105 energy meter, kWh pulse output with partial meter Direct connected to 63 A A9MEM2105

iEM2110 energy meter, kWh and kvarh pulse outputs with two tariffs, four quadrant energy

measurement, MID certied

Direct connected to 63 A A9MEM2110

iEM2135 energy meter, M-Bus communication, four quadrant energy measurement, two

tariffs, MID certied

Direct connected to 63 A A9MEM2135

iEM2150 energy meter, Modbus communication, four quadrant energy measurement Direct connected to 63 A A9MEM2150

iEM2155 energy meter, Modbus communication, four quadrant energy measurement, two

tariffs, MID certied

Direct connected to 63 A A9MEM2155

36 PLSED309005EN

Acti 9 iEM2000 Series

Energy Meters

Basic energy meters

iEM2000 & iEM2100 technical specications

FUNCTION GUIDE iEM2000T iEM2000 iEM2010 iEM2100 iEM2105 iEM2110 iEM2135 iEM2150 iEM2155

Direct connection Up to 40 A Up to 63 A

Width 1 x 18 mm module (18 mm) 2 x 18 mm modules (36 mm)

MID compliance n n n n n

Multi-tariff 2 tariffs 2 tariffs 2 tariffs

Four quadrant energy

measurement

nnnn

Communication M-Bus Modbus

Digital input (tariff

switching)

1 1 1

Pulse output for kWh/

kvarh

1 1 1 2

Pulse output operation 100 pulses / kWh (120 ms long) 1 pulse /

kWh (200

ms long)

1 to 1000

pulses /

kWh or

kvarh (30

to 100 ms

long)

Accuracy class: Active

Energy

Class 1

IEC 62053-21

Class 1

IEC 62053-21

Class B

EN50470-3

Class 1

IEC 62053-21

Class B

EN50470-3

Class 1

IEC 62053-21

Class 1

IEC 62053-21

Class 1

IEC 62053-21

Class B

EN50470-3

Class 1

IEC 62053-21

Class B

EN50470-3

Class 1

IEC 62053-21

Class 1

IEC 62053-21

Class B

EN50470-3

Accuracy class: Reac-

tive Energy

Class 2 (according to IEC62053-23)

Display capacity 999999.9 kWh 99999 kWh or 999.99

MWh

999999.99 kWh

Voltage range (L-N) 184 to 276 Vac 184 to 276 Vac 92 to 276 Vac

Meter constant LED 3200 ashes per kWh 1000 ashes per kWh

Wiring capacity (Top) 4 mm26 mm24 mm2

Wiring capacity

(Bottom)

10 mm216 mm232 mm2

Consumption <10 VA 2.5 VA 3 VA

Temperature -10°C to +55°C -25°C to +55°C

kWh nnnnnnnnn

kVARh nnnn

Active power nnnn

Reactive power nnnn

Power Factor nnnn

Current and voltage nnnn

Frequency nnnn

PLSED309005EN

iEM2000 & iEM2100 technical specications

FUNCTION GUIDE iEM2000T iEM2000 iEM2010 iEM2100 iEM2105 iEM2110 iEM2135 iEM2150 iEM2155

Direct connection Up to 40 A Up to 63 A

Width 1 x 18 mm module (18 mm) 2 x 18 mm modules (36 mm)

MID compliance n n n n n

Multi-tariff 2 tariffs 2 tariffs 2 tariffs

Four quadrant energy

measurement

nnnn

Communication M-Bus Modbus

Digital input (tariff

switching)

1 1 1

Pulse output for kWh/

kvarh

1 1 1 2

Pulse output operation 100 pulses / kWh (120 ms long) 1 pulse /

kWh (200

ms long)

1 to 1000

pulses /

kWh or

kvarh (30

to 100 ms

long)

Accuracy class: Active

Energy

Class 1

IEC 62053-21

Class 1

IEC 62053-21

Class B

EN50470-3

Class 1

IEC 62053-21

Class B

EN50470-3

Class 1

IEC 62053-21

Class 1

IEC 62053-21

Class 1

IEC 62053-21

Class B

EN50470-3

Class 1

IEC 62053-21

Class B

EN50470-3

Class 1

IEC 62053-21

Class 1

IEC 62053-21

Class B

EN50470-3

Accuracy class: Reac-

tive Energy

Class 2 (according to IEC62053-23)

Display capacity 999999.9 kWh 99999 kWh or 999.99

MWh

999999.99 kWh

Voltage range (L-N) 184 to 276 Vac 184 to 276 Vac 92 to 276 Vac

Meter constant LED 3200 ashes per kWh 1000 ashes per kWh

Wiring capacity (Top) 4 mm26 mm24 mm2

Wiring capacity

(Bottom)

10 mm216 mm232 mm2

Consumption <10 VA 2.5 VA 3 VA

Temperature -10°C to +55°C -25°C to +55°C

kWh nnnnnnnnn

kVARh nnnn

Active power nnnn

Reactive power nnnn

Power Factor nnnn

Current and voltage nnnn

Frequency nnnn

Acti 9 iEM2000 Series

Energy Meters

iEM2000 dimensions

DB116734

iEM2100/iEM2105 dimensions

DB103483

iEM2110/iEM2135/iEM2150/iEM2155 dimensions

PB115003

NOTE: See the appropriate product Installation Guide for complete instructions.

Basic energy meters

38 PLSED309005EN

Acti 9 iEM3000 Series Energy Meters

Functions and characteristics

Basic energy meters

PB108410

The Acti 9 iEM3000 Energy Meter Series offers a cost-attractive, competitive range of

DIN rail-mounted energy meters ideal for sub-billing and cost allocation applications.

Combined with communication systems, like Smart Link, the Acti 9 iEM3000 Series

makes it easy to integrate electrical distribution measurements into customer’s facility

management systems. It’s the right energy meter at the right price for the right job.

Three versions are available: 63A direct measure (iEM3100 models), current

transformers associated meter (iEM3200 models), and 125A direct measure

(iEM3300 models). For each range, eight versions are available (seven for the

iEM3300) to satisfy basic to advanced applications:

b iEM3100/iEM3200/iEM3300: kWh meter with partial counter

b iEM3110/iEM3210/iEM3310: kWh meter with partial counter and pulse output.

MID certied.

b iEM3115/iEM3215: multi-tariff meter controlled by digital input or internal clock,

MID certied.

b iEM3135/iEM3235/iEM3335: energy meter, four quadrant, multi-tariffs with partial

counter and current, voltage, power measurement. M-Bus communication, digital I/O

and MID certied.

b iEM3150/iEM3250/iEM3350: kWh meter with partial counter and current, voltage,

power measurement. Modbus communication.

b iEM3155/iEM3255/iEM3355: energy meter, four quadrant, multi-tariffs with partial

counter and current, voltage, power measurement. Modbus communication, digital

I/O, MID certied.

b iEM3165/iEM3265/iEM3365: energy meter, four quadrant, multi-tariffs with partial

counter and current, voltage, power measurement. BACnet communication, digital

I/O and MID certied.

b iEM3175/iEM3275/iEM3375: energy meter, four quadrant, multi-tariffs with partial

counter and current, voltage, power measurement. LON communication, digital

input and MID certied.

Innovative design makes the meters smart and simple:

bEasy to install for panel builders

bEasy to commission for contractors and installers

bEasy to operate for end users

Applications

Cost management applications

b�Bill verication

bSub-billing, including WAGES view (four user-dened tariffs)

bCost allocation, including WAGES view

Network management applications

bBasic electrical parameters like current, voltage and power

bOnboard overload alarm to avoid circuit overload and trip

bEasy integration with PLC systems by input/output interface

bMarket segments

bBuildings & Industry

bData centres and networks

bInfrastructure (airports, road tunnels, telecom)

bCharacteristics

b�Self-powered meters

b�Chain measurement (meters + CTs) accuracy class 1

b�Compliance with IEC 61557-12, IEC 62053-21/22, IEC 62053-23, EN50470-3

b Compact, 5 module width

b Graphical display for easy viewing

b�Onboard Modbus, LON, M-Bus or BACnet communication

b�Easy wiring (without CTs) Acti 9 iEM3100 and iEM3300 models

b�Double xation on DIN rail (horizontal or vertical)

b�Anti-tamper security features ensure the integrity of your data

b�MID compliant (selected models) providing certied accuracy and data security

Acti 9 iEM3100/3200 energy meter

PB113590

Acti 9 iEM3300 energy meter

Front Panel Display and Buttons

A Measurement

B Ea /Er = active / reactive energy (if

available)

C Value

D Active tariff (if applicable)

E Scroll through the available screens

F View more screens related to the

measurement category (if available)

G Go back to previous screen

H Date and time (if applicable)

I Unit

J Icon indicating date / time not set

PB105323

PLSED309005EN

Function guide iEM3100

iEM3200

iEM3300

iEM3110

iEM3210

iEM3310

iEM3115

iEM3215

iEM3135

iEM3235

iEM3335

iEM3150

iEM3250

iEM3350

iEM3155

iEM3255

iEM3355

iEM3165

iEM3265

iEM3365

iEM3175

iEM3275

iEM3375

Width (18 mm module, DIN rail mounting) 5 / 5 / 7 5 / 5 / 7 5 / 5 5 / 5 / 7 5 / 5 / 7 5 / 5 / 7 5 / 5 / 7 5 / 5 / 7

Direct measurement (up to 63A or 125A) 63A / − / 125A 63A / − / 125A 63A / − 63A / − / 125A 63A / − / 125A 63A / − / 125A 63A / − / 125A 63A / − / 125A

Measurement inputs through CTs (1A, 5A) − / ■ / − − / ■ / − − / ■ − / ■ / − − / ■ / − − / ■ / − − / ■ / − − / ■ / −

Measurement inputs through VTs − / ■ / − − / ■ / − − / ■ / − − / ■ / − − / ■ / −

Active Energy measurements class

(Total & partial kWh)

1 / 0.5S / 1 1 / 0.5S / 1 1 / 0.5S 1 / 0.5S / 1 1 / 0.5S / 1 1 / 0.5S / 1 1 / 0.5S / 1 1 / 0.5S / 1

Four Quadrant Energy measurements b b b b

Electrical measurements (I, V, P, ...) b b b b b

Multi-tariff (internal clock) 4 4 4 4 4

Multi-tariff (external control) 4 2 2 2 2

Measurement display (number of lines) 3 3 3 3 3 3 3 3

Digital inputs Programmable

(Tariff control or

WAGES input)

1 1 1 1

Tariff control only 2

Digital ouputs Programmable (kWh

pulse or kW alarm)

1 1 1

kWh pulse only 1

kW overload alarm 1 1 1

M-Bus protocol b

Modbus protocol b b

BACnet protocol b

LON b

MID (legal metrology certication) b b b b b b

PB108423

Connectivity advantages

Programmable digital input External tariff control signal (4 tariffs)

Remote Reset partial counter

External status, e.g. breaker status

Collect WAGES pulses

Programmable digital output kWh overload alarm (iEM3135, iEM3155, iEM3165

iEM3235, iEM3255, iEM3265, EM3335, iEM3355, iEM3365)

kWh pulses

Graphic LCD display Scroll energies

Current, voltage, power, frequency, power factor

Communication Serial communication options are available with M-Bus,

Modbus, BACnet or LON protocols

Standards

Standards IEC 61557-12, IEC 61036, IEC 61010, UL61010-1, IEC

62053-21/22 Class 1 and Class 0.5S, IEC 62053-23

Acti 9 iEM3100 models direct connected (63 A) Direct

connected up to 63 A

Multi-tariff capability

The Acti 9 iEM3000 Series allows arrangement of kWh consumption in four different

registers. This can be controlled by:

b Digital Inputs. Signal can be provided by PLC or utilities

b Internal clock programmable by HMI

b Through communication

This function allows users to:

b Make tenant metering for dual source applications to differentiate backup source or

utility source

b Understand well the consumption during working time and non working time, and

between working days and weekends

b Follow up feeders consumption in line with utility tariff rates

Acti 9 iEM3200 models (1 A / 5 A CT connected)

PB108424

Acti 9 iEM3000 Series Energy Meters

Functions and characteristics

Basic energy meters

40 PLSED309005EN

Acti 9 iEM3000 Series Energy Meters

Functions and characteristics

Basic energy meters

Specication guide iEM3100/iEM3300 Models

iEM3100

iEM3300

iEM3110

iEM3310

iEM3115 iEM3135

iEM3335

iEM3150

iEM3350

iEM3155

iEM3355

iEM3165

iEM3365

iEM3175

iEM3375

Current (max.) Direct connected

(iEM31xx)

63A for iEM3100 models, 125A for iEM3300 models

Meter constant LED 500/kWh

Pulse output Up to

1000p/kWh

Up to

1000p/kWh

Up to

1000p/kWh

Multi-tariff 4 tariffs 4 tariffs 4 tariffs

Communication M-bus Modbus Modbus BACnet LON

DI/DO 0/1 2/0 1/1 1/1 1/1 1/0

MID (EN50470-3) b b b b b

Network 1P+N, 3P, 3P+N

Accuracy class Class 1 (IEC 62053-21 and IEC61557-12) Class B (EN50470-3)

Wiring capacity 16 mm² for iEM3100 models, 50 mm2 for iEM3300 models

Display max. LCD 99999999.9kWh

Voltage (L-L) 3 x 100/173 V AC to 3 x 277/480 V AC (50/60 Hz)

IP protection IP40 front panel and IP20 casing

Temperature -25°C to 55°C (K55)

Product size 5 x 18 mm for iEM3100 models, 8 x 18 mm for iEM3300 models

Overvoltage and measurement Category III, Degree of pollution 2

kWh bbbbbbbb

kVARh b b b b

Active power bbbbb

Reactive power b b b b

Currents and voltages bbbbb

Overload alarm b b b b

Hour counter b b b b

Specication guide iEM3200 Models

iEM3200 iEM3210 iEM3215 iEM3235 iEM3250 iEM3255 iEM3265 iEM3275

1 A / 5 A CTs (max current) 6 A

Meter constant LED 5000/kWh

Pulse output frequency Up to

500p/kWh

Up to

500p/kWh

Up to 500p/kWh

Multi-tariff 4 tariff 4 tariffs 4 tariffs

Communication M-bus Modbus Modbus BACnet LON

DI/DO 0/1 2/0 1/1 1/1 1/1 1/0

MID (EN50470-3) bbb bbb

Network 1P+N, 3P, 3P+N

support CTs

1P+N, 3P, 3P+N

support CTs & VTs

Accuracy class Class 0.5S (IEC 62053-22 and IEC61557-12) Class C (EN50470-3)(1)

Wiring capacity 6 mm² for currents and 4 mm² for voltages

Display max. LCD 99999999.9kWh or 99999999.9MWh

Voltage (L-L) 3 x 100/173 V AC to 3 x 277/480 V AC (50/60 Hz)

IP protection IP40 front panel and IP20 casing

Temperature -25°C to 55°C (K55)

Product size 5 steps of 18 mm

Overvoltage & measurement Category III, Degree of pollution 2

kWh bbbbbbbb

kVARh b b b b

Active power bbbbb

Reactive power b b b b

Currents and voltages bbbbb

Overload alarm b b b b

Hour counter b b b b

(1) For 1 A CTs Class 1 (IEC6253-21 and IEC61557-12 Class B (EN50470-3)

PLSED309005EN

iEM3000/iEM3200 series dimensions

PB113600

Acti 9 iEM3100/iEM3200 Series front aps open and closed

PB105305

PB105306

Acti 9 iEM3000 Series parts

1. Digital inputs for tariff control (iEM3115 / iEM3215)

2. Display for measurement and conguration

3. Pulse out for remote transfer (iEM3110 / iEM3210)

4. Cancellation

5. Conrmation

6. Selection

7. Flashing yellow meter indicator to check accuracy

8. Green indicator: on/off, error

PB105313

PB1053241

Acti 9 iEM3000 Series Energy Meters

Dimensions and connection

Basic energy meters

iEM3300 series dimensions

PB113599

OK ESC

Reset

Config

L3’ L3 L2 L1’ L1L1

L2’

N’N

200 /kWh

S0+S0-

126

4.96

69.3

2.73

93.8

3.7

1.77

63.8

2.51

103.2

4.06

OK ESC

Reset

Config

L3’ L3 L2 L1’ L1L1

L2’

N’N

200 /kWh

S0+S0-

126

4.96

69.3

2.73

93.8

3.7

1.77

63.8

2.51

103.2

4.06

Acti 9 iEM3000 Series parts

1. Digital inputs for tariff control (iEM3115 / iEM3215)

2. Display for measurement and conguration

3. Pulse out for remote transfer (iEM3110 / iEM3210)

4. Cancellation

5. Conrmation

6. Selection

7. Flashing yellow meter indicator to check accuracy

8. Green indicator: on/off, error

42 PLSED309005EN

Meter model and description Current measurement Ref. no.

iEM3100 basic energy meter Direct connected 63 A A9MEM3100

iEM3110 energy meter with pulse output Direct connected 63 A A9MEM3110

iEM3115 multi-tariff energy meter Direct connected 63 A A9MEM3115

iEM3135 advanced multi-tariff energy meter &

electrical parameter plus M-Bus comm port

Direct connected 63 A A9MEM3135

iEM3150 energy meter & electrical parameter

plus Modbus RS485 comm port

Direct connected 63 A A9MEM3150

iEM3155 advanced multi-tariff energy meter &

electrical parameter plus Modbus RS485 comm

port

Direct connected 63 A A9MEM3155

iEM3165 advanced multi-tariff energy meter &

electrical parameter plus BACnet MS/TP comm

port

Direct connected 63 A A9MEM3165

iEM3175 advanced multi-tariff energy meter &

electrical parameter plus LON TP/FT-10 comm

port

Direct connected 63 A A9MEM3175

iEM3200 basic energy meter Transformer connected 5 A A9MEM3200

iEM3210 energy meter with pulse output Transformer connected 5 A A9MEM3210

iEM3215 multi-tariff energy meter Transformer connected 5 A A9MEM3215

iEM3235 advanced multi-tariff energy meter &

electrical parameter plus M-Bus comm port

Transformer connected 5 A A9MEM3235

iEM3250 energy meter & electrical parameter

plus Modbus RS485 comm port

Transformer connected 5 A A9MEM3250

iEM3255 advanced multi-tariff energy meter &

electrical parameter plus Modbus RS485 comm

port

Transformer connected 5 A A9MEM3255

iEM3265 advanced multi-tariff energy meter &

electrical parameter plus BACnet MS/TP comm port

Transformer connected 5 A A9MEM3265

iEM3275 advanced multi-tariff energy meter &

electrical parameter plus LON TP/FT-10 comm port

Transformer connected 5 A A9MEM3275

iEM3300 basic energy meter Direct connected 125 A A9MEM3300

iEM3310 energy meter with pulse output Direct connected 125 A A9MEM3310

iEM3335 advanced multi-tariff energy meter &

electrical parameter plus M-Bus comm port

Direct connected 125 A A9MEM3335

iEM3350 energy meter & electrical parameter

plus Modbus RS485 comm port

Direct connected 125 A A9MEM3350

iEM3355 advanced multi-tariff energy meter &

electrical parameter plus Modbus RS485 comm port

Direct connected 125 A A9MEM3355

iEM3365 advanced multi-tariff energy meter &

electrical parameter plus BACnet MS/TP comm port

Direct connected 125 A A9MEM3365

iEM3375 advanced multi-tariff energy meter &

electrical parameter plus LON TP/FT-10 comm port

Direct connected 125 A A9MEM3375

Acti 9 iEM3000 Series Energy Meters

Commercial reference numbers

Basic energy meters

See your Schneider Electric representative for complete ordering information.

PLSED309005EN

Meter model and description Current measurement Ref. no.

iEM3100 basic energy meter Direct connected 63 A A9MEM3100

iEM3110 energy meter with pulse output Direct connected 63 A A9MEM3110

iEM3115 multi-tariff energy meter Direct connected 63 A A9MEM3115

iEM3135 advanced multi-tariff energy meter &

electrical parameter plus M-Bus comm port

Direct connected 63 A A9MEM3135

iEM3150 energy meter & electrical parameter

plus Modbus RS485 comm port

Direct connected 63 A A9MEM3150

iEM3155 advanced multi-tariff energy meter &

electrical parameter plus Modbus RS485 comm

port

Direct connected 63 A A9MEM3155

iEM3165 advanced multi-tariff energy meter &

electrical parameter plus BACnet MS/TP comm

port

Direct connected 63 A A9MEM3165

iEM3175 advanced multi-tariff energy meter &

electrical parameter plus LON TP/FT-10 comm

port

Direct connected 63 A A9MEM3175

iEM3200 basic energy meter Transformer connected 5 A A9MEM3200

iEM3210 energy meter with pulse output Transformer connected 5 A A9MEM3210

iEM3215 multi-tariff energy meter Transformer connected 5 A A9MEM3215

iEM3235 advanced multi-tariff energy meter &

electrical parameter plus M-Bus comm port

Transformer connected 5 A A9MEM3235

iEM3250 energy meter & electrical parameter

plus Modbus RS485 comm port

Transformer connected 5 A A9MEM3250

iEM3255 advanced multi-tariff energy meter &

electrical parameter plus Modbus RS485 comm

port

Transformer connected 5 A A9MEM3255

iEM3265 advanced multi-tariff energy meter &

electrical parameter plus BACnet MS/TP comm port

Transformer connected 5 A A9MEM3265

iEM3275 advanced multi-tariff energy meter &

electrical parameter plus LON TP/FT-10 comm port

Transformer connected 5 A A9MEM3275

iEM3300 basic energy meter Direct connected 125 A A9MEM3300

iEM3310 energy meter with pulse output Direct connected 125 A A9MEM3310

iEM3335 advanced multi-tariff energy meter &

electrical parameter plus M-Bus comm port

Direct connected 125 A A9MEM3335

iEM3350 energy meter & electrical parameter

plus Modbus RS485 comm port

Direct connected 125 A A9MEM3350

iEM3355 advanced multi-tariff energy meter &

electrical parameter plus Modbus RS485 comm port

Direct connected 125 A A9MEM3355

iEM3365 advanced multi-tariff energy meter &

electrical parameter plus BACnet MS/TP comm port

Direct connected 125 A A9MEM3365

iEM3375 advanced multi-tariff energy meter &

electrical parameter plus LON TP/FT-10 comm port

Direct connected 125 A A9MEM3375

PowerLogic BCPM

Functions and characteristics

PE86281

PowerLogicTM BCPM A/B/C main board

The ideal solution for data centre managers, energy or facility managers, engineers and

operational executives who are responsible for delivering power to critical applications. In

corporate and hosted data centre facilities, this technology helps you plan and optimise

the critical power infrastructure to meet the demands of continuous availability.

The PowerLogic BCPM is a highly accurate, full-featured metering product designed for

the unique, multi-circuit and minimal space requirements of a high performance power

distribution unit (PDU) or remote power panel (RPP). It offers class 1 (1%) power and

energy system accuracy (including 50A or 100A CTs) on all branch channels.

The BCPM monitors up to 84 branch circuits with a single device and also monitors

the incoming power mains to provide information on a complete PDU. It also offers

multi-phase measurement totals with exible support for any conguration of

multi-phase breakers. Full alarming capabilities ensure that potential issues are dealt

with before they become problems.

Unlike products designed for specic hardware, the exible BCPM will t any PDU or

RPP design and supports both new and retrot installations. It has exceptional

dynamic range and accuracy, and optional feature sets to meet the energy

challenges of mission critical data centres.

Applications

Revenue Grade sub-billing.

Data Centre load monitoring and alarming

Comprehensive monitoring of lighting control panels

Maximise uptime and avoid outages.

Optimise existing infrastructure.

Effectively plan future infrastructure needs.

Improve power distribution efciency.

Track usage and allocate energy costs.

Main characteristics

Monitor up to 84 branch circuits with a single BCPM.

Ideal for installation in both new PDUs and retrot projects:

bNew installations: BCPM with solid core CTs monitors up to 84 branch circuits

using 2 or 4 CT strips. Solid core CTs are rated to 100 A CTs and are mounted on

strips to simplify installation. CT strips are available with 12, 8 or 21 CTs per strip on

18 mm spacings. 21 CT strips with 3/4” or 1” spacings are also available.

bRetrot projects: BCPMSC with split core CTs is ideal for retrots. Any number of split

core CTs, up to 84 maximum, can be installed with a single BCPM. Three sizes of CT are

supported (50 A, 100 A, and 200 A) and all three CT sizes can be used on a single

BCPM. Adapter boards with terminals for split-core CTs can be mounted using DIN-rail,

Snaptrack or on a common mounting plate with the main board (42 ch Y63 models only).

Class 1.0 system accuracy for Revenue Grade measurements

Branch Power and Energy measurements fully meet ANSI and IEC class 1 accuracy

requirements with 50 or 100 Amp CTs included. No need to de-rate meter branch

accuracy to allow for CTs. Voltage and current measurement accuracy is 0.5% and

currents are measured down to 50mA. Easily differentiate between the ow of low

current and a trip where no current ows.

Designed to t any PDU or RPP design

Lowers your total installation costs as well as the cost per meter point by supporting

both new and retrot installations.

New models with integrated Ethernet offer broad protocol support

All models integrate easily into existing networks using Modbus RTU communications

over an RS-485 serial link. BCPME and BCPMSCE models offer integrated Ethernet

and add support for Modbus TCP, BACnet IP, BACnet MS/TP and SNMP. An optional

external gateway can be added to all other models to add the same capability.

Compatible with PowerLogic power monitoring software

Easily turn the large amount of data collected by the devices into useful decision-

making information.

Multi-circuit metering

PowerLogicTM BCPM split core 12mm, 18mm, 21mm, .75 in and 1 in

CTs strips

PB113644

Flexible Conguration capability

Set the ordering and orientation of CT strips, assign individual CT size and phases,

support for 1, 2, and 3-pole breakers in any conguration.

PowerLogicTM BCPME Measurement Unit”

PB113646PB113647PB113649 PB113645

PB113648

44 PLSED309005EN

PowerLogic BCPM

Functions and characteristics (cont.)

PE86167

PowerLogic BCPM

1 50-pin ribbon cable connectors (data acquisition board).

2 Auxiliary inputs.

3 Control (mains) power connection.

4 Control power fuse.

5 Alive LED.

6 Voltage taps.

7 Communications address DIP switches.

8 Communications settings DIP switch.

9 RS-485 2 connection.

10 RS-485 LEDs.

Selection guide BCPMA BCPMB BCPMC BCPME

General

Use on LV systems b b b b

Power and energy measurements

Mains b b -b

Branch circuits b- - b

Instantaneous rms values

Voltage, frequency b b -b

Current b b b b

Active power Total and per phase b b

(mains only)

-b

Power factor Total and per phase b b

(mains only)

-b

Energy values

Active energy b b

(mains only)

-b

Demand values

Total active power Present and max.

values

b b

(mains only)

-b

Power quality measurements

Detection of over-voltage/under-voltage b b -b

Alarming

Alarms b b b b

Power supply

AC version

90-277 V ac 90-277 V ac 90-277 V ac 100-277 V ac

Communication

RS 485 port b b b b

Modbus protocol b b b b

Ethernet Port 1* 1* 1* b

Modbus RTU protocol 1* 1* 1* b

BACnet IP protocol 1* 1* 1* b

BACnet MS/TP protocol 1* 1* 1* b

SNMP protocol 1* 1* 1* b

Multi-circuit metering

*1 Add E8951 Gateway

PowerLogic BCPM specications

Electrical characteristics

Type of measurement

Accuracy Power/energy 1% system accuracy (including 50A or 100A

branch CTs)

Voltage ±0.5% of reading

Current ±0.5% of reading

Minimum “ON” current 50mA

Sampling rate Points per cycle 2560 Hz

Data update rate 1.8 seconds (Modbus), 14 seconds (BACnet) 20

sec (SNMP)

Input-voltage

characteristics

Measured voltage 150 – 480 V ac L-L (1)

90 – 277 V ac L-N (1)

Measurement range 150 – 480 V ac L-L (1)

90 – 277 V ac L-N (1)

Power supply AC 100 – 277 V ac (50/60 Hz)

Auxiliary CT Current Input Range 0-0.333V; CTs must be rated for use with Class 1

voltage inputs

Mechanical characteristics

Weight 1.5 kg

Dimensions A/B/C model Circuit

board

288 x 146 mm

E model housing (w/

brackets on long sides)

253 mm W x 307 mm H x 71 mm D

E model housing (w/

brackets on short ends)

210 mm W x 353 mm H x 71 mm D

PLSED309005EN

PowerLogic BCPM

Functions and characteristics (cont.)

Multi-circuit metering

PowerLogic BCPM specications (cont’d)

Environmental conditions

Operating temperature 0 to 60ºC

Storage temperature -40ºC to 70ºC

Installation category CAT III, pollution degree 2

Safety

Europe IEC 61010

U.S. and Canada UL 508 Open type device

Communication

RS 485 (A/B/C models) Baud rate: DIP-switch selectable 9600, 19200, 38400

DIP-switch selectable 2-wire or 4-wire RS-485. Parity

selectable: Even, Odd or None.

RS 485 (E Models) Baud rate: congured via Web-server. Baud selectable:

9600, 19200, 38400. Parity selectable: Even, Odd or

None. 2-wire RS-485.

Ethernet (E models) 10/100 Mbit Ethernet. RJ-45 connection. Static IP or

DHCP.

Protocols Modbus RTU on all models, BCPME models also support

Modbus TCP, SNMP, BACnet IP & BACnet MS/TP

Firmware characteristics

Detection of over-voltage/

under-voltage

User-dened alarm thresholds for over-voltage and

under-voltage detection

Alarms

Four alarm levels: high-high, high, low and low-low (users

dene the setpoints for each). Each alarm has a latching

status to alert the operator that an alarm has previously

occurred. High and Low alarms have instantaneous status

to let the operator know if the alarm state is still occurring.

Firmware update Update via Modbus

(1) Feature sets ‘A’ , ‘B’ and ‘E only.

1/3 V low-voltage CT (LVCT) for Mains - specications

Electrical characteristics

Accuracy 1% from 10% to 100% of rated

current(LVCT0xxxx0S/1S/2S/3S/4S [split-core])

0.5% from 5% to 100% of rated current

(LVCT2xxxx0S/2S/3S [solid-core])

Frequency range 50/60 Hz

Leads 18 AWG, 600 V ac, 1.8m standard length

Max. voltage L-N sensed conductor 300 V ac (LVCT0xxxx0S)

600 V ac (LVCT0xxxx1S/2S/3S/4S, LVCT2xxxxxS)

Environmental conditions

Operating temperature 0ºC to 70ºC (LVCT0xxxx0S/1S)

-15ºC to 60ºC (LVCT0xxxx2S/3S/4S less than 2400A)

-15ºC to 60ºC (LVCT02404S [2400A])

-40ºC to 85ºC (LVCT2xxxx0S/2S/3S [solid-core])

Storage temperature -40ºC to 105ºC (LVCT0xxxx0S/1S)

-40ºC to 70ºC (LVCT0xxxx2S/3S/4S)

-50ºC to 105ºC (LVCT2xxxx0S/2S/3S [solid-core])

Humidity range 0 to 95% non-condensing

PowerLogic BCPM specications

Electrical characteristics

Type of measurement

Accuracy Power/energy 1% system accuracy (including 50A or 100A

branch CTs)

Voltage ±0.5% of reading

Current ±0.5% of reading

Minimum “ON” current 50mA

Sampling rate Points per cycle 2560 Hz

Data update rate 1.8 seconds (Modbus), 14 seconds (BACnet) 20

sec (SNMP)

Input-voltage

characteristics

Measured voltage 150 – 480 V ac L-L (1)

90 – 277 V ac L-N (1)

Measurement range 150 – 480 V ac L-L (1)

90 – 277 V ac L-N (1)

Power supply AC 100 – 277 V ac (50/60 Hz)

Auxiliary CT Current Input Range 0-0.333V; CTs must be rated for use with Class 1

voltage inputs

Mechanical characteristics

Weight 1.5 kg

Dimensions A/B/C model Circuit

board

288 x 146 mm

E model housing (w/

brackets on long sides)

253 mm W x 307 mm H x 71 mm D

E model housing (w/

brackets on short ends)

210 mm W x 353 mm H x 71 mm D

46 PLSED309005EN

PowerLogic BCPM

Functions and characteristics (cont.)

Multi-circuit metering

BCPM part numbers

BCPM with solid core CTs

Item Code Description

1 Model BCPM BCPM with solid core CTs. Highly accurate meter

that monitors branch circuits and the incoming

power mains and includes full alarming

capabilities

Example BCPM with solid core CTs part number. 2Feature set AAdvanced - Monitors power & energy per circuit &

mains, Modbus RTU only (add E8951 for other

protocols), Meter Main Board comes on an

aluminum mounting plate

1 Model.

2 Feature set.

3 CT spacing (solid-core models only)

4 Number of circuits.

5 Brand.

BIntermediate - Monitors current per circuit, power

and energy per mains, Modbus RTU only (add

E8951 for other protocols), Meter Main Board

comes on an aluminum mounting plate

CBasic - Monitors current only per circuit & mains,

Modbus RTU only (add E8951 for other protocols),

Meter Main Board comes on an aluminum

mounting plate

EAdvanced, with Ethernet - Monitors power &

energy per circuit & mains, Meter Main Board is

enclosed in a metal housing

3CT spacing 03/4” (19 mm) CT spacing

11” (26 mm) CT spacing

218 mm CT spacing

4Number of circuits 24 24 circuits, (2) 18-CT strips (18 mm spacing only)

36 36 circuits, (2) 18-CT strips (18 mm spacing only)

42 42 circuits, (2) 21-CT strips

48 48 circuits, (4) 18-CT strips (18 mm spacing only)

72 72 circuits, (4) 18-CT strips (18 mm spacing only)

84 84 circuits, (4) 21-CT strips

5 Brand S Schneider Electric

PE86168PB113664PB113665

The PowerLogic BCPM uses .333 VAC output split-core

CTs for the auxiliary inputs. These CTs are ordered

separately from the BCPM.

* Quantity and style of CT strips and cables included

varies by model

PLSED309005EN

BCPM with split core CTs

Model BCPMSC BCPM with split core CTs. Highly accurate meter

that monitors branch circuits and the incoming

power mains and includes full alarming

capabilities

2Feature set AAdvanced - Monitors power and energy per circuit

and mains, Modbus RTU only (add E8951 for

other protocols), Meter Main Board comes on an

aluminum mounting plate

BIntermediate - Monitors current per circuit, power

and energy per mains, Modbus RTU only (add

E8951 for other protocols), Meter Main Board

comes on an aluminum mounting plate

CBasic - Monitors current only per circuit and mains,

Modbus RTU only (add E8951 for other

protocols), Meter Main Board comes on an

aluminum mounting plate

EAdvanced, with Ethernet - Monitors power &

energy per circuit & mains, Meter Main Board is

enclosed in a metal housing

4Number of circuits 142 circuits (no branch CTs or ribbon cables, order

separately)

284 circuits (no branch CTs or ribbon cables, order

separately)

Y63 42 circuits – main and adapter boards on single

mounting plate (no branch CTs or ribbon, order

separately)

30 30 split core CTs (50 A)

42 42 split core CTs (50 A)

60 60 split core CTs (50 A)

84 84 split core CTs (50 A)

5 Brand S Schneider Electric

PowerLogic BCPM

Functions and characteristics (cont.)

Multi-circuit metering

PB113735PB113666

1 Model.

2 Feature set.

3 Number of circuits.

4 Brand.

The BCPMSC models with 1, 2 or Y63 as the

number of circuits DO NOT INCLUDE ANY branch

CTs or ribbon cables (they include only the Main

board and adapater board assemblies) . These

models are provided to allow users to order a

specic combination of CT quantities, CT sizes, CT

lead lengths and ribbon cable styles and lengths.

The CTs and cables must be ordered separately.

Models with more than 2 as the number of circuits

include 50A branch CTs with 2 meter leads and

1.8M round ribbon cables.

The PowerLogic BCPMSC uses .333 VAC output

split-core CTs for the auxiliary inputs. These CTs are

ordered separately from the BCPM.

* Quantity of CT and cables included varies by model

Example BCPMSC with split core CTs part number.

PB113730

48 PLSED309005EN

PowerLogic BCPM

Functions and characteristics (cont.)

Multi-circuit metering

PE86284

PB113650PB113651

Flat ribbon cable

Round ribbon cable

BCPM part numbers for solid and split core CTs (contd.)

BCPM with split core CTs

Part number Description

BCPMA042S 42-circuit solid-core power & energy meter, 100A CTs (2 strips), ¾” spacing

BCPMA084S 84-circuit solid-core power & energy meter, 100A CTs (4 strips), ¾”spacing

BCPMA142S 42-circuit solid-core power & energy meter, 100A CTs (2 strips), 1” spacing

BCPMA184S 84-circuit solid-core power & energy meter, 100A CTs (4 strips), 1” mm spacing

BCPMA224S 24-circuit solid-core power & energy meter, 100A CTs (2 strips), 18mm spacing

BCPMA236S 36-circuit solid-core power & energy meter, 100A CTs (2 strips), 18mm spacing

BCPMA242S 42-circuit solid-core power & energy meter, 100A CTs (2 strips), 18mm spacing

BCPMA248S 48-circuit solid-core power & energy meter, 100A CTs (4 strips), 18mm spacing

BCPMA272S 72-circuit solid-core power & energy meter, 100A CTs (4 strips), 18mm spacing

BCPMA284S 84-circuit solid-core power & energy meter, 100A CTs (4 strips), 18mm spacing

BCPMB042S 42-circuit solid-core branch current, mains power meter, 100A CTs (2 strips), ¾”

spacing

BCPMB084S 84-circuit solid-core branch current, mains power meter, 100A CTs (4 strips), ¾”

spacing

BCPMB142S 42-circuit solid-core branch current, mains power meter, 100A CTs (2 strips), 1”

spacing

BCPMB184S 84-circuit solid-core branch current, mains power meter, 100A CTs (4 strips), 1”

spacing

BCPMB224S 24-circuit solid-core branch current, mains power meter, 100A CTs (2 strips),

18mm spacing

BCPMB236S 36-circuit solid-core branch current, mains power meter, 100A CTs (2 strips),

18mm spacing

BCPMB242S 42-circuit solid-core branch current, mains power meter, 100A CTs (2 strips),

18mm spacing

BCPMB248S 48-circuit solid-core branch current, mains power meter, 100A CTs (4 strips),

18mm spacing

BCPMB272S 72-circuit solid-core branch current, mains power meter, 100A CTs (4 strips),

18mm spacing

BCPMB284S 84-circuit solid-core branch current, mains power meter, 100A CTs (4 strips),

18mm spacing

BCPMC042S 42-circuit solid-core branch current meter, 100A CTs (2 strips), ¾” spacing

BCPMC084S 84-circuit solid-core branch current meter, 100A CTs (4 strips), ¾” spacing

BCPMC142S 42-circuit solid-core branch current meter, 100A CTs (2 strips), 1” spacing

BCPMC184S 84-circuit solid-core branch current meter, 100A CTs (4 strips), 1” spacing

BCPMC224S 24-circuit solid-core branch current meter, 100A CTs (2 strips), 18mm spacing

BCPMC236S 36-circuit solid-core branch current meter, 100A CTs (2 strips), 18mm spacing

BCPMC242S 42-circuit solid-core branch current meter, 100A CTs (2 strips), 18mm spacing

BCPMC248S 48-circuit solid-core branch current meter, 100A CTs (4 strips), 18mm spacing

BCPMC272S 72-circuit solid-core branch current meter, 100A CTs (4 strips), 18mm spacing

BCPMC284S 84-circuit solid-core branch current meter, 100A CTs (4 strips), 18mm spacing

BCPME042S 42-circuit solid-core power & energy meter w/Ethernet, 100A CTs (2 strips), ¾”

spacing

BCPME084S 84-circuit solid-core power & energy meter w/Ethernet, 100A CTs (4 strips),

¾”spacing

BCPME142S 42-circuit solid-core power & energy meter w/Ethernet, 100A CTs (2 strips), 1”

spacing

BCPME184S 84-circuit solid-core power & energy meter w/Ethernet, 100A CTs (4 strips), 1”

mm spacing

BCPME224S 24-circuit solid-core power & energy meter w/Ethernet, 100A CTs (2 strips),

18mm spacing

BCPME236S 36-circuit solid-core power & energy meter w/Ethernet, 100A CTs (2 strips),

18mm spacing

BCPME242S 42-circuit solid-core power & energy meter w/Ethernet, 100A CTs (2 strips),

18mm spacing

BCPME248S 48-circuit solid-core power & energy meter w/Ethernet, 100A CTs (4 strips),

18mm spacing

BCPME272S 72-circuit solid-core power & energy meter w/Ethernet, 100A CTs (4 strips),

18mm spacing

BCPME284S 84-circuit solid-core power & energy meter w/Ethernet, 100A CTs (4 strips),

18mm spacing

Cabling and connection

Flat ribbon cables are recommended for use

when the BCPM printed circuit board will be

mounted inside of the PDU that is being

monitored. Round ribbon cables are the

prefered choice when the ribbon cable will be

threaded through conduit.

BCPMSCxY63S 42-circuit split-core models come

with the main board, (2) adapter boards and

ribbon cables all mounted on a backplate, to

simplify installation.

PLSED309005EN

PowerLogic BCPM

Functions and characteristics (cont.)

Multi-circuit metering

PE86183

PB113658

PowerLogicTM LVCT0xxxxS Split-core Low-voltage (1/3V) CTs for Aux

inputs (Mains) are ideal for retrot applications

PowerLogicTM LVCT2xxxxS Low-voltage (1/3V) solid-core CTs for

Aux inputs (Mains) are ideal for panel builders (small, medium, large)

PB113652

PB113657

The PowerLogicTM BCPM uses .333 VAC output

split-core CTs for the auxiliary inputs. These

CTs are ordered separately from the BCPM.

BCPM with split core CTs (cont’d)

BCPMSCA1S 42-circuit split-core power and energy meter, CTs and cables sold separately

BCPMSCA2S 84-circuit split-core power and energy meter, CTs and cables sold separately

BCPMSCA30S 30-circuit split-core power and energy meter, (30) 50A CTs & (2) 4’ cables

BCPMSCA42S 42-circuit split-core power and energy meter, (42) 50A CTs & (2) 4’ cables

BCPMSCA60S 60-circuit split-core power and energy meter, (60) 50A CTs & (4) 4’ cables

BCPMSCAY63S 42-circuit split core power and energy meter, all boards on backplate, CTs and

cables sold separately

BCPMSCA84S 84-circuit split-core power and energy meter, with (84) 50A CTs & (4) 4’ cables

BCPMSCB1S 42-circuit split-core branch current, mains power meter, CTs and cables sold

separately

BCPMSCB2S 84-circuit split-core branch current, mains power meter, CTs and cables sold

separately

BCPMSCB30S 30-circuit split-core branch current, mains power meter, (30) 50A CTs & (2) 4’

cables

BCPMSCB42S 42-circuit split-core branch current, mains power meter, (42) 50A CTs & (2) 4’

cables

BCPMSCB60S 60-circuit split-core branch current, mains power meter, (60) 50A CTs & (4) 4’

cables

BCPMSCBY63S 42-circuit split-core branch current, mains, all boards on backplate, CTs and

cables sold separately

BCPMSCB84S 84-circuit split-core branch current, mains power meter, (84) 50A CTs & (4) 4’

cables

BCPMSCC1S 42-circuit split-core current meter, CTs and cables sold separately

BCPMSCC2S 84-circuit split-core current meter, CTs and cables sold separately

BCPMSCC30S 30-circuit split-core current meter, (30) 50A CTs & (2) 4’ cables

BCPMSCC42S 42 circuit split-core current meter, (42) 50A CTs & (2) 4’ cables

BCPMSCC60S 60-circuit split-core current meter, (60) 50A CTs & (4) 4’ cables

BCPMSCCY63S 42-circuit split-core current meter, all boards on backplate, CTs and cables sold

separately

BCPMSCC84S 84-circuit split-core current meter, (84) 50A CTs & (4) 4’ cables

BCPMSCE1S 42-circuit split-core power and energy meter w/Ethernet, CTs and cables sold

separately

BCPMSCE2S 84-circuit split-core power and energy meter w/Ethernet, CTs and cables sold

separately

BCPMSCE30S 30-circuit split-core power and energy meter w/Ethernet, (30) 50A CTs & (2) 4’

BCPMSCE42S 42-circuit split-core power and energy meter w/Ethernet, (42) 50A CTs & (2) 4’

cables

BCPMSCE60S 60-circuit split-core power and energy meter w/Ethernet, (60) 50A CTs & (4) 4’

cables

BCPMSCE84S 84-circuit split-core power and energy meter w/Ethernet, (84) 50A CTs & (4) 4’

cables

50 PLSED309005EN

PowerLogic BCPM

Functions and characteristics (cont.)

Multi-circuit metering

BCPM split core branch CTs and adapter boards

BCPMSCADPBS BCPM adapter boards, quantity 2, for split core BCPM

BCPMSCCT0 BCPM 50A split core CTs, Quantity 6, 1.8 m lead lengths

BCPMSCCT0R20 BCPM 50A split core CTs, quantity 6, 6 m lead lengths

BCPMSCCT1 BCPM 100A split core CTs, Quantity 6, 1.8 m lead lengths

BCPMSCCT1R20 BCPM 100A split core CTs, Quantity 6, 6 m lead lengths

BCPMSCCT3 BCPM 200A split core CTs, Quantity 1, 1.8 m lead lengths

BCPMSCCT3R20 BCPM 200A split core CTs, Quantity 1, 6 m lead lengths

Additional accessories for use with BCPM products

BCPMCOVERS BCPM circuit board cover

BCPMREPAIR CT repair kit for solid core BCPM (includes one CT)

H6803R-0100 Additional 100A split core CT for use with solid core repair kit

E8951 Modbus to BACnet protocol converter

CBL008 Flat Ribbon cable (quantity 1) for BCPM, length = 0.45 m

CBL016 Flat Ribbon cable (quantity 1) for BCPM, length = 1.2 m

CBL017 Flat Ribbon cable (quantity 1) for BCPM, length = 1.5 m

CBL018 Flat Ribbon cable (quantity 1) for BCPM, length = 1.8 m

CBL019 Flat Ribbon cable (quantity 1) for BCPM, length = 2.4 m

CBL020 Flat Ribbon cable (quantity 1) for BCPM, length = 3.0 m

CBL021 Flat Ribbon cable (quantity 1) for BCPM, length = 6.1 m

CBL022 Round Ribbon cable (quantity 1) for BCPM, length = 1.2 m

CBL023 Round Ribbon cable (quantity 1) for BCPM, length = 3 m

CBL024 Round Ribbon cable (quantity 1) for BCPM, length = 6.1 m

CBL031 Round Ribbon cable (quantity 1) for BCPM, length = 0.5 m

CBL033 Round Ribbon cable (quantity 1) for BCPM, length = 0.8 m

1/3 V low-voltage Split-Core CTs for Aux inputs (Mains)

Part number Amperage rating Inside dimensions

LVCT00050S 50A 10 mm x 11 mm

LVCT00101S 200A 16 mm x 20 mm

LVCT00202S 200A 32 mm x 32 mm

LVCT00102S 100A 30 mm x 31 mm

LVCT00202S 200A 30 mm x 31 mm

LVCT00302S 300A 30 mm x 31 mm

LVCT00403S 400A 62 mm x 73 mm

LVCT00603S 600A 62 mm x 73 mm

LVCT00803S 800A 62 mm x 73 mm

LVCT00804S 800A 62 mm x 139 mm

LVCT01004S 1000A 62 mm x 139 mm

LVCT01204S 1200A 62 mm x 139 mm

LVCT01604S 1600A 62 mm x 139 mm

LVCT02004S 2000A 62 mm x 139 mm

LVCT02404S 2400A 62 mm x 139 mm

1/3 V low-voltage Solid core CTs for Aux inputs (Mains)

Part number Amperage rating Inside dimensions

LVCT20050S 50A 10 mm

LVCT20100S 100A 10 mm

LVCT20202S 200A 25 mm

LVCT20403S 400A 31 mm

PLSED309005EN

Multi-circuit metering PowerLogic BCPM

Dimensions and connection

211 mm

146 mm

122 mm

184 mm

228 mm

PowerLogic BCPM dimensions

PB113661

PB113662

1.0”

(26 mm)

1.0”

(26 mm)

2.75”

(70 mm)

4.6”

(117 mm)

PE86286

PowerLogic BCPM adapter board (one board

per 21 split core branch CTs)

PE86169

52 PLSED309005EN

PowerLogic BCPM

Dimensions and connection

Multi-circuit metering

PB113660 PB113659

50A-200A Split-Core CT dimensions

Small form factor

100/200/300 Amp

A = 96 mm

B = 30 mm

C = 31 mm

D = 30 mm

E = 100 mm

F = 121 mm

Large form factor

800/1000/1200/

1600/2000/2400 Amp

A = 125 mm

B = 139 mm

C = 62 mm

D = 30 mm

E = 201 mm

F = 151 mm

Medium form factor

400/600/800 Amp

A = 125 mm

B = 73 mm

C = 62 mm

D = 30 mm

E = 132 mm

F = 151 mm

PB113663

1/3 V low-voltage CT form factor

Solid core CT dimensions

E31CT0 50 Amp

A = 1.0” (26 mm)

B = 0.5” (11 mm)

C = 0.4” (10 mm)

D = 0.9” (23 mm)

E = 1.6” (40 mm)

E31CT1 100 Amp

A = 1.5” (39 mm)

B = 0.8” (20 mm)

C = 0.7” (16 mm)

D = 1.6” (40 mm)

E = 2.1” (53 mm)

E31CT3 200 Amp

A = 1.5” (39 mm)

B = 1.25” (32 mm)

C = 1.25” (32 mm)

D = 2.5” (64 mm)

E = 2.8” (71 mm)

E31CT0 50 Amp

A = 1.0” (26 mm)

B = 0.5” (11 mm)

C = 0.4” (10 mm)

D = 0.9” (23 mm)

E = 1.6” (40 mm)

E31CT1 100 Amp

A = 1.5” (39 mm)

B = 0.8” (20 mm)

C = 0.7” (16 mm)

D = 1.6” (40 mm)

E = 2.1” (53 mm)

E31CT3 200 Amp

A = 1.5” (39 mm)

B = 1.25” (32 mm)

C = 1.25” (32 mm)

D = 2.5” (64 mm)

E = 2.8” (71 mm)

These dimensions apply to

both BCPMSCCTxx (branch

CTs) and LVCT0xxxx0S/1S

(for Mains) 50A-200A CT

families.

PLSED309005EN

Multi-circuit metering

PowerLogic BCPM with solid core CT strips installation details

PE86171

PowerLogic BCPM with split core CTs installation details

PE86287

Mains monitoring

(CTs ordered separately)

BCPM PCB

Transducers (1/3 Vac)

Circuit monitoring

4 CT strips monitor 84 circuits

PowerLogic BCPM

Dimensions and connection

Ethernet

Modbus

PowerLogic wireless range is designed to retrot existing switchboards, and

enhance energy efcciency of buildings in operation for many years, by:

bMonitoring energy consumption, to detect potential savings.

bMonitoring operation of the electrical system, to optimize service to the building

occupants.

bPowerLogic EM4300 meters collect a broad scope of electrical data, from the

distribution line they are tted on.

bPowerLogic WT 4200-transmitters collect data from various meters (water, air,

gas, steam etc.) with pulse outputs.

Collected data from both these sources are transmitted to a data concentrator, which

enables their reading by various energy management services and software.

For data concentrators of various types, see:

bCom’X for Ethernet networks

http://www.schneider-electric.com/products/ww/en/82258-energy-and-power-digitization/

82259-interfaces-and-gateways/62072-enerlinx-comx/

bSmartStruXure Lite MPM managers for BACnet, EnOcean, CANbus nest works

http://www.schneider-electric.com/products/ww/en/1200-building-management-system/

1210-building-management-systems/62191-smartstruxure-lite-solution/?BUSINESS=2

Zigbee 2.4 GHz

PowerLogic EM4300 PowerLogic WT4200

Gateway,

data logger,

energy server

Radio Frequency transmission

DB407246

Multi-circuit and

wireless metering PowerLogic EM4300

Wireless metering system

54 PLSED309005EN

Functions

Electrical circuits and loads monitoring, through a combination of power and enerrgy

metering with wireless communication.

Features and benetits

bInstallation time and therefore total cost of ownership is minimized thanks to:

vwireless communication.

vattached exible current sensors, immediately tted around any cable or bar

without disconnection. Power-off time to t several, meters in a switchboard is a

matter of minutes.

bEquipment can be scaled over time, according to savings elds identication, or

other matters of interest.

bBroad scope of collected data make PowerLogic EM4300 of high added-value for:

venergy management.

venergy cost allocations.

velectrical network management and supervision.

Collected information

bEnergy: active, reactive, apparent, phase by phase and aggregated.

bActive, reactive and apparent powers, power factor.

bRMS Voltage and frequency.

bMaximum RMS current and minimum RMS voltage over the last minutes (1 to 30).

Wireless data transmission

bZigbee Pro HA protocol.

b2.4 GHz radio frequency.

bMaximum power: 10 mW (10 dBm).

bCompatible with Com’X and MPM gateways, data loggers and energy servers.

RF Operating range

The recommended distances between the meter and the receiver are shown below:

≤ 5 m (16 ft)

≤ 10 m (32 ft)

Note: Do not install the meter if there is a solid concrete wall between the meter and the gateway.

Certain installation locations or scenarios should be avoided.

bDo not install the meter in front of or close to metallic parts, which may reduce the

efciency of the embedded antenna.

bDo not install in a location that directly blocks the antenna on the meter.

bWireless meters are inside

electrical switchboards.

bWireless receivers are

located in the technical room

with up to 20 meters range.

bLocation of each element

has to match distances as

described on the picture.

bAll barriers, walls or pipes

have to be considered during

the installation. Moving an

element by few centimers

can increse or decrease the

wireless transmission

performance.

bChecking the LQI

(Link Quality Index) is

recommended to build a

robust network.

PowerLogic EM4300

Wireless metering system (cont.)

DB407247

DB407250

Multi-circuit and

wireless metering

PLSED309005EN

Commercial reference numbers

Model Current rating Current sensor inner Ø Ref. number

EM4302 200 A 55 mm (2.17 in) METSEEM4302

EM4305 500 A 55 mm (2.17 in) METSEEM4305

EM4310 1000 A 125 mm (4.92 in) METSEEM4310

EM4320 2000 A 125 mm (4.92 in) METSEEM4320

Technical characteristics

Control power

Maximum supply current 4 A

Maximum burden 2.0 W

Measurement characteristics

Input voltage 90 V to 300 V

Frequency range 50/60 Hz

Current range 0 % to 120 % of rated value

(200, 500, 1000 or 2000 A)

Current sensors 3 attached to the meter and calibrated as a

single unit

Accuracy 1 % on active energy (3-phase with neutral)

Mechanical characteristics

Degree of protection (for indoor use only, not

suitable for wet locations)

IP20

IK06

Insulation Class II (IEC 61010-1 CAT III 300 V)

Environmental characteristics

Operating temperature -10°C to 55°C (14°F to 131°F)

Moisture withstand 5 % to 90 % relative humidity, non-condensing,

maximum dewpoint 38°C (100°F)

Pollution degree 2

Voltage surges Category III

Altitude 2000 m (6562 ft) above sea level

Standards compliance

Safety IEC/EN 61010-1 ed. 3, UL 61010-1 ed. 3

Electromagnetic compatibility EN 61326-1:2013

Wireless communication FCC CFR Part 15, subparts and C

PowerLogic EM4300

Wireless metering system (cont.)

Multi-circuit and

wireless metering

56 PLSED309005EN

Dimensions

5.0 mm

(0.2 in)

109.3

(4.30)

100.1

(3.94)

112.2

(4.42)

53.9

(2.12)

( in )

42.6

(1.67)

Ø 4.2

Ø (0.15)

2.9

(0.11)

35.8

(1.41)

38.7

(1.52)

1.5 m

4.9 ft

Model I (A) Ø (mm / in) Weight

EM4302 200 55 / 2.17 *

EM4305 500 55 / 2.17 *

EM4310 1000 125 / 4.92 *

EM4320 2000 125 / 4.92 *

DB407248

Mounting

bDIN-rail or at surface.

bFlexible current sensors around conductor to be monitored.

Max inner Ø 55 or 125 mm. For safe and correct mounting, refer to the installation

guide.

*Please consult your Schenider Electric representative.

PowerLogic EM4300

Wireless metering system (cont.)

DB407249

Multi-circuit and

wireless metering

PLSED309005EN

EM4000 series

Functions and characteristics

Multi-circuit energy meters

PB113714

EM4000 series multi-circuit energy meter

The compact PowerLogic EM4000 series multi-circuit energy meter from Schneider

Electric enables reliable monitoring building electrical loads iwith a low installation

cost-per-point by combining revenue-accurate electricity sub-metering with

advanced communications technology.

The EM4000 is ideal for departmental metering applications and M&V within ofce

towers, condominiums, apartment buildings, shopping centres and other multi-user

environments, or small-footprint retail.

The PowerLogic EM4000 series meters monitor up to 24 meter points with a single

device. Multiple meters can be combined to support an unlimited number of points.

Two meter models offer a choice of CTs and installation options:

bPowerLogic EM4033: 333 mV, split-core CTs

bPowerLogic EM4080: 80 mA solid -core CTs

Applications

bEnergy management.

bEnergy cost allocation.

bUtility bill verication.

Main characteristics

Compact, maintenance-free design

Requires no oor space

Hi-density, ﬂexible connection

From single-pole to single- or three-phase metering -- supports up to 24 circuits.

Select the connection type using an intuitive conguration tool.

Direct connection

For 100 - 300 V ac L-N electrical distribution systems:

120/240 V, 120/208 V, 277/480 V

Multiple CT types

Support a variety of needs in both new and retrot installations.

1/3 V output CT option does not require shorting blocks, making it the ideal choice for

retrot installations.

No rewiring required

Use existing wiring to connect to existing panels.

Integrated communications networks.

Onboard Ethernet or RS-485 allows for easy integration into existing

communications networks.

Part numbers

Model Description Part number

EM4033 24 x 333 mV inputs, 120V control power 60 Hz METSEEM403316

24 x 333 mV inputs, 277V control power 60 Hz METSEEM403336

EM4080 24 x 80 mA inputs, 120V control power 60 Hz METSEEM408016

24 x 80 mA inputs, 277V control power 60 Hz METSEEM408036

58 PLSED309005EN

EM4000 series

Functions and characteristics (cont.)

Selection guide EM4033 EM4080

General

Use on LV systems b b

Accuracy +/- 0.5% b b

Accuracy compliance ANSI C12.1 and C12.20 Class 0.5;

IEC 62053-22, Class 0.5S

b b

Maximum circuits:

single-pole / single phase /

three-phase

24 / 12 / 8 b b

Instantaneous rms values

Energy real, kWh received/delivered b b

reactive, kvarh received/delivered b b

apparent, VAh b b

Voltage b b

Pulse counts b b

Voltage and current V rms, I rms per phase b b

Power real, reactive, apparent b b

Power factor b b

Measurements available for data logging

Energy real, kWh received/delivered b b

reactive, kvarh received/delivered b b

apparent, VAh b b

Voltage b b

Display

Backlit LCD display 2 lines of 16 characters b b

Optional remote modular display available b b

Communication

Ethernet port b b

MODBUS-RTU over RS-485 b b

Pulse inputs 2b b

Protocols: Modbus TCP/IP, HTTP, BACnet/IP, FTP, and SNTP b b

Installation options

0.333 V CTs b

80 mA CTs b

Split core CT b

Solid core CT b b

Multi-circuit energy meters

Legend:

1 Cover screw location

2 Meter point input connector

3 Cable connector

4 Mounting keyhole

5 Ingress punch-outs

6 Earth stud

6 Sense voltage terminal block

8 Control voltage terminal block

9 Fuse

10 Control voltage jumper

11 RTU interface

12 Display

13 Remote display connector

14 Serial RS232

15 Ethernet port

16 Pulse in terminal blocks

17 Pulse out connector

PowerLogic EM4000 meter 480Y/277V three-phase wye service

connection

PB113716

PowerLogic EM4033 and PowerLogic EM4080 internal view.

PB113718

PB113716

PLSED309005EN

EM4000 series

Functions and characteristics (cont.)

Multi-circuit energy meters

Electrical characteristics

Input-voltage

characteristics

Inputs V1, V2, V3, Vn

Measured voltage 80 - 480 V AC L-L without PTs

Up to 999 kV with external PTs

Frequency range 60 Hz

Mechanical characteristics

Weight EM4033/EM4080 approx. 4.0 kg

Dimensions EM4033/EM4080 33.5 cm x 30.5 cm x 5.5 cm

(13.125 in x 12 in x 2.125 in)

Environmental conditions

Operating temperature -40°C to +70°C (-40°F to +158°F)

Storage temperature -40°C to +70°C (-40°F to +158°F)

Humidity rating 0% to 90 % RH non-condensing

Enclosure Type 1 (indoor or enclosed outdoor use)

Altitude 3000 m (9843 ft)

Pollution degree 2

Safety and standards

UL Certied to IEC/EA/CSA 61010-1

CSA-C22.2 No 61010-1-04

FCC Part 15 Class B

ICES-003 EN55022, IEC 6100-4-5

ANSI/TIA968-A: 2002

Communication

Ports Ethernet

MODBUS-RTU over RS-485

Pulse inputs 2

Protocols: Modbus TCP/IP, HTTP, BACnet/IP,

FTP, and SNTP

Display characteristics

Integrated backlit LCD display 2 lines, 16 digits per line display;

R / L arrow buttons select metering point;

Display button cycles through measurements

per point.

60 PLSED309005EN

EM4000 series

Dimensions and connection

Multi-circuit energy meters

PB113726PB113719

EM4X00, CT termination, PT module

PLSED309005EN

EM4000 series

Accessories

Multi-circuit energy meters

PT Module

The PT module provides step-down voltage connections to Schneider Electric

PowerLogic meters for metering single-phase to three-phase voltages of 600V,

347V, or 400V, while meeting all regulatory electrical safety and ANSI 0.5 Accu-

racy Class standards. The PT module provides both the per-phase input metering

voltages and the auxiliary input power required by Schneider Electric PowerLogic

energy meters.

There are two variants of the PT module that support the following source voltages

and wiring congurations:

347V Wye / 600V Delta variant supports:

b347V, three-phase, 4-wire wye

b600V, three-phase, 3-wire delta

480V Delta variant supports:

b480V, three-phase, 3-wire delta

The 347V/600V PT module variant has three sense voltage potential transformers

for metering. The conguration of the transformers (347V wye or 600V delta) is se-

lected by using the jumper provided. The 480V PT module has two sense voltage

potential transformers for metering. There is a separate auxiliary power transformer

in both variants to operate the meter. All voltage inputs are fused.

PowerHawk PT module specications

Dimensions Height 8.39 in. (21.31 cm)

Width 13.53 in. (34.37 cm)

Depth 2.125 in. (5.4 cm)

Weight 112.5 lb (5.67 kg)

Fuse ratings High voltage inputs F1 T315 mA, 1000V

F2 T315 mA, 1000V

F3 T315 mA, 1000V

Voltage inputs F4 T250 mA, 250V

F5 T250 mA, 250V

F6 T250 mA, 250V

F7 T250 mA, 250V

Transformer

specications

Input voltage 600V Voltage tolerance: +/-10%

480V Voltage tolerance: +/-10%

347V Voltage tolerance: +/-10%

Output voltage 120V Accuracy: 0.3%

Environmental Operating temperature -40 to158°F (-40 to 70°C)

Operating humidity 5% to 90% non-condensing

Usage environment Indoor or enclosed outdoor

environment

Maximum altitude 9843 ft (3000 m)

Pollution degree 2

PB113724

Part number Description

METSEPTMOD480 480 V PT Module for EM4X00 meter

METSEPTMOD347600 347 V/600 V PT Module for EM4X00 meter

62 PLSED309005EN

PowerHawk PT module specications

Dimensions Height 8.39 in. (21.31 cm)

Width 13.53 in. (34.37 cm)

Depth 2.125 in. (5.4 cm)

Weight 112.5 lb (5.67 kg)

Fuse ratings High voltage inputs F1 T315 mA, 1000V

F2 T315 mA, 1000V

F3 T315 mA, 1000V

Voltage inputs F4 T250 mA, 250V

F5 T250 mA, 250V

F6 T250 mA, 250V

F7 T250 mA, 250V

Transformer

specications

Input voltage 600V Voltage tolerance: +/-10%

480V Voltage tolerance: +/-10%

347V Voltage tolerance: +/-10%

Output voltage 120V Accuracy: 0.3%

Environmental Operating temperature -40 to158°F (-40 to 70°C)

Operating humidity 5% to 90% non-condensing

Usage environment Indoor or enclosed outdoor

environment

Maximum altitude 9843 ft (3000 m)

Pollution degree 2

PB113725

EM4000 series

Accessories

Multi-circuit energy meters

CT Module

PowerLogic 4080 meters have 2 shorting options that provide a seamless and

sealable mechanical package. The CT Shorting Module provides CT connections

via the color coded 25 pair cable routed into the breaker panel. All CTs are shorted

at the same time for safe removal of the meter for maintenance when the electrical

circuits are still live.

The CT Termination Module has the same shorting ability, but provides CT connec-

tions via 24 2 position screw down terminal blocks. Individual pairs are then routed

from the CT Termination Module to 1 or more breaker panels via conduit knock

outs provided on the module. Thus eliminating the need for a splitter box to route

CT cables to multiple panels.

Part number Description

METSECTTERM CT Termination Module for EM4X00 meter

METSECTSHORT CT Shorting Module for EM4X00 meter

Part number Description

METSECONV580 5 A : 80 mA converter for EM4X00 meter

Converter

The 5A:80mA converter is useful in applications where there are existing 5A CT’s

integrated into large motors or switch gear. The 5A:80mA converter matches the

5A secondary of the load to the 80mA input of the meter. In Billing Grade

applications, the 5A:80mA converter is also used to connect regulatory grade

large aperture, large amperage CT’s with 5A secondaries to the 80mA of

PowerLogic 4X80 meters.

PB113729

The 5 A to 80 mA converter

PB111056

The 5 A to 80 mA converter dimensions

PLSED309005EN

Legend:

1 Source

2 Energy ow

3 Load

4 X1

5 X2

PowerLogic EM4033 split-core 0.333V current transformer

EM4000 series

Accessories and dimensions

Multi-circuit energy meters

CTs

bModel 8 (80/100 mA Secondary)

bWindow Size: 3.25” Diameters

bApplication: Metering

bFrequency: 50- 400 Hz

bInsulation Level: 600 Volts, 10Kv BIL Full Wave

bFlexible leads available for all case congurations. Flexible leads are UL 1015

105˚C, C.S.A approved #16 AWG, 24” long standard length. Non- ‐standard lengths

are available upon request.

bTerminals are brass studs No. 8-32 UNC with one at washer, one lock washer

and one nut each. Terminals are only available on the square case conguration.

bMounting brackets kits for the Model 8SHT are available when required.

bApproximate weight: 3 lbs. (1.36 kg)

Part number Description

METSECT80200 CT, solid core, 200 A primary, 80 mA secondary, for

use with EM4X80 multi-circuit meter

METSECT80400 CT, solid core, 400 A primary, 80 mA secondary, for

use with EM4X80 multi-circuit meter

METSECT80600 CT, solid core, 600 A primary, 80 mA secondary, for

use with EM4X80 multi-circuit meter

PB111060

200 A CT dimensions

METSECT80600 600 A 80 mA CT

200 A CT

PB111061

600 A 80 mA CT dimensions

PB111059PB111057

PB111058

400 A CT 400 A CT dimensions

PB113971

PB113972

64 PLSED309005EN

PLSED309005EN

EM4800 series

Functions and characteristics

Multi-circuit energy meters

PE86326 PE86325

EM4800 series multi-circuit energy meter

front (above), installed in panel (below)

The compact PowerLogic EM4800 series multi-circuit energy meter from Schneider

Electric enables reliable metering of individual tenants with a low installation

cost-per-point by combining revenue-accurate electricity sub-metering with

advanced communications technology.

The EM4800 is ideal for multi-tenant or departmental metering applications within

ofce towers, condominiums, apartment buildings, shopping centres and other

multi-user environments.

The PowerLogic EM4800 series meters monitor up to 24 tenants with a single

device. Multiple meters can be combined to support an unlimited number of suites.

Three meter models offer a choice of CT secondary ratings and installation options:

PowerLogic EM4805: 5 A, split- or solid-core CTs

PowerLogic EM4880: 80 mA, solid-core CTs

Applications

Multi-tenant metering.

Energy management.

Energy cost allocation.

Utility bill verication.

Main characteristics

Compact, maintenance-free design

Requires no oor space.

Hi-density, ﬂexible connection

From single-pole to single- or three-phase metering -- supports up to 24 circuits.

Select the connection type using an intuitive conguration tool.

Direct connection

For 100 - 300 V ac L-N electrical distribution systems:

120/240 V, 120/208 V, 230/240 V, 220/380 V, 240/415 V, 277/480 V

Multiple CT types

Support a variety of needs in both new and retrot installations.

1/3 V output CT option does not require shorting blocks, making it the ideal choice for

retrot installations.

No rewiring required

Use existing wiring to connect to existing panels.

Integrated communications

Onboard Ethernet and modem allows for easy integration into existing

communications networks.

Part numbers

Model Description Part number

EM4805 24 x 5 A inputs, 230/240 V control power, 50 Hz METSEEM480525

24 x 5 A inputs, 120 V control power, 60 Hz METSEEM480516

EM4880 24 x 80 mA inputs, 230/240 V control power, 50 Hz METSEEM488025

24 x 80 mA inputs, 120 V control power, 60 Hz METSEEM488016

66 PLSED309005EN

EM4800 series

Functions and characteristics (cont.)

PE86327A

PowerLogic EM4800 series digital panel meter.

Selection guide EM4805 EM4880

General

Use on LV systems b b

Accuracy +/- 0.5% b b

Accuracy compliance ANSI C12.1 and C12.20 Class 0.5;

IEC 62053-22, Class 0.5S

b b

Maximum circuits:

single-pole / single phase /

three-phase

24 / 12 / 8 b b

Instantaneous rms values

Energy real, kWh received/delivered b b

reactive, kvarh received/delivered b b

apparent, VAh b b

Voltage b b

Pulse counts b b

Voltage and current V rms, I rms per phase b b

Power real, reactive, apparent b b

Power factor b b

Measurements available for data logging

Energy real, kWh received/delivered b b

reactive, kvarh received/delivered b b

apparent, VAh b b

Voltage b b

Display

Backlit LCD display 2 lines of 16 characters b b

Optional remote modular display available b b

Communication

Ethernet port b b

V.90 modem port b b

Pulse inputs 2b b

Protocols: Modbus TCP/IP, HTTP, BACnet/IP, FTP, and SNTP b b

Installation options

5 A CTs b

80 mA CTs b

Split core CT b

Solid core CT b b

Remore modular display b b

Multi-circuit energy meters

PLSED309005EN

EM4800 series

Functions and characteristics (cont.)

Multi-circuit energy meters

Electrical characteristics

Input-voltage

characteristics

Inputs V1, V2, V3, Vn

Measured voltage 80 - 480 V AC L-L without PTs

Up to 999 kV with external PTs

Frequency range 50/60 Hz

Mechanical characteristics

Weight EM4805 approx. 5.4 kg

EM4833 / EM4880 approx. 4.0 kg

Dimensions EM4805 33.5 cm x 44 cm x 5.5 cm

(13.125 in x 17 in x 2.125 in)

EM4833 / EM4880 33.5 cm x 30.5 cm x 5.5 cm

(13.125 in x 12 in x 2.125 in)

Environmental conditions

Operating temperature -40°C to +70°C (-40ºF to +158°F)

Storage temperature -40°C to +70°C (-40ºF to +158°F)

Humidity rating 0% to 90 % RH non-condensing

Enclosure Type 1 (indoor or enclosed outdoor use)

Altitude 3000 m (9843 ft)

Pollution degree 2

Safety and standards

UL Certied to IEC/EA/CSA 61010-1

CSA-C22.2 No 61010-1-04

FCC Part 15 Class B

ICES-003 EN55022, IEC 6100-4-5

ANSI/TIA968-A: 2002

Communication

Ports Ethernet

V.90 modem

Pulse inputs 2

Protocols: Modbus TCP/IP, HTTP, BACnet/IP,

FTP, and SNTP

Display characteristics

Integrated backlit LCD display 2 ines, 16 digits per line display;

R / L arrow buttons select metering point;

Display button cycles through measurements

per point.

68 PLSED309005EN

Power Meter Series PM3200

Functions and characteristics

Basic multi-function metering

PB108433

This PowerLogic Power meter offers basic to advanced measurement capabilities.

With compact size and DIN rail mounting, the PM3200 allows mains and feeders

monitoring in small electrical cabinets. Combined with current transformers and

voltage transformers, these meters can monitor 2-, 3- and 4-wire systems. The

graphic display has intuitive navigation to easily access important parameters.

Four versions are available offering basic to advanced applications:

b PM3200

v Electrical parameters I, In, U, V, PQS, E, PF, Hz

v Power/current demand

v Min/max.

b PM3210

v Electrical parameters I, In, U, V, PQS, E, PF, Hz, THD

v Power/current demand, peak demand

v Min/max.

v 5 timestamped alarms

v kWh pulse output

b PM3250

v Electrical parameters I, In, U, V, PQS, E, PF, Hz, THD

v Power/current demand, peak demand

v Min/max.

v 5 timestamped alarms

v LED to indicate communications

v RS485 port for Modbus communication

b PM3255

v Electrical parameters I, In, U, V, PQS, E, PF, Hz, THD

v Power/current demand and peak demand

v Flexible power and energy data logging

v Min/max. and 15 timestamped alarms

v LED to indicate communications

v Up to 4 tariffs management

v 2 digital inputs, 2 digital outputs

v Memory for load prole (demand 10mn to 60mn)

v RS485 port for Modbus communication

bInnovative design makes the meters smart and simple:

bEasy to install for panel builders

bEasy to commission for contractors and installers

bEasy to operate for end users

Applications

Cost management applications

b�Bill checking

bSub-billing, including WAGES view

bCost allocation, including WAGES view

Network management applications

bPanel instrumentation

bUp to 15 onboard timestamped alarms to monitor events

bEasy integration with PLC system by input/output interface

Market segments

bBuildings

bIndustry

bData centres and networks

bInfrastructure (airports, road tunnels, telecom)

Part numbers

Power Meter Series PM3200

PB108435

Power Meter Series PM3255

Meter model and description Performance Part no.

PM3200 basic power meter Basic power meter METSEPM3200

PM3210 power meter with pulse output Power, current, THD, peak demand METSEPM3210

PM3250 power meter with RS485 port Power, current, THD, peak demand METSEPM3250

PM3255 power meter plus 2 digital inputs,

2 digital outputs with RS485 port

Power, current, THD, peak demand,

memory for load prole

METSEPM3255

Front of meter parts

1 Control power

2 Display with white backlit

3 Flashing yellow meter indicator (to check accuracy)

4 Pulse output for remote transfer (PM3210)

5 Cancellation

6 Conrmation

7 Up

8 Down

PLSED309005EN

Basic multi-function metering Power Meter Series PM3200

Functions and characteristics (cont.)

Function guide PM3200 Range

PM3200 PM3210 PM3250 PM3255

Performance standard

IEC61557-12 PMD/Sx/K55/0.5 bbbb

General

Use on LV and HV systems bbbb

Number of samples per cycle 32 32 32 32

CT input 1A/5A bbbb

VT input bbbb

Multi-tariff 4 4 4 4

Multi-lingual backlit display bbbb

Instantaneous rms values

Current, voltage Per phase and average bbbb

Active, reactive, apparent power Total and per phase bbbb

Power factor Total and per phase bbbb

Energy values

Active, reactive and apparent energy; import and export bbbb

Demand value

Current, power (active, reactive, apparent) demand; present bbbb

Current, power (active, reactive, apparent) demand; peak bbb

Power quality measurements

THD Current and voltage bbb

Data recording

Min/max of the instantaneous values bbbb

Power demand logs b

Energy consumption log (day, week, month) b

Alarms with time stamping 5 5 15

Digital inputs/digital outputs 0/1 2/2

Communication

RS-485 port b b

Modbus protocol b b

PB108434

Connectivity advantages

Programmable digital input External tariff control signal (4 tariffs)

Remote Reset partial counter

External status like breaker status

Collect WAGES pulses

Programmable digital output Alarm (PM3255)

kWh pulses

Graphic LCD display Backlit graphic display allows smart navigation in relevant

information and in multi languages

Communication Modbus RS485 with screw terminals allows connection to a

daisy chain

Power Meter Series PM3210

70 PLSED309005EN

Power Meter Series PM3200

Functions and characteristics (cont.)

Basic multi-function metering

Specications PM3200 Range

Type of measurement True rms up to the 15th harmonic on three-phase (3P,3P+N) and single-phase

AC systems. 32 samples per cycle

Measurement accuracy

Current with x/5A CTs 0.3% from 0.5A to 6A

Current with x/1A CTs 0.5% from 0.1A to 1.2A

Voltage 0.3% from 50V to 330V (Ph-N), from 80V to 570V (Ph-Ph)

Power factor ±0.005 from 0.5A to 6A with x/5A CTs; from 0.1A to 1.2A with x/1A CTs and from

0.5L to 0.8C

Active/Apparent Power with x/5A CTs Class 0.5

Active/Apparent Power with x/1A CTs Class 1

Reactive power Class 2

Frequency 0.05% from 45 to 65Hz

Active energy with x/5A CTs IEC62053-22 Class 0.5s

Active energy with x/1A CTs IEC62053-21 Class 1

Reactive energy IEC62053-23 Class 2

Data update rate

Update rate 1s

Input-voltage characteristics

Measured voltage 50V to 330V AC (direct / VT secondary Ph-N)

80V to 570V AC (direct / VT secondary Ph-Ph)

up to 1MV AC (with external VT)

Frequency range 45Hz to 65Hz

Input-current characteristics

CT primary Adjustable from 1A to 32767A

CT secondary 1A or 5A

Measurement input range with x/5A CTs 0.05A to 6A

Measurement input range with x/1A CTs 0.02A to 1.2A

Permissible overload 10A continuous, 20A for 10s/hour

Control Power

AC 100/173 to 277/480V AC (+/-20%), 3W/5VA; 45Hz to 65Hz

DC 100 to 300V DC, 3W

Input

Digital inputs (PM3255) 11 to 40V DC, 24V DC nominal, <=4mA maximum burden, 3.5kVrms insulation

Output

Digital output (PM3210) Optocoupler, polarity sensitive, 5 to 30V, 15mA max, 3.5kVrms insulation

Digital outputs (PM3255) Solid state relay, polarity insensitive, 5 to 40V, 50mA max, 50Ω max,

3.5kVrms insulation

PLSED309005EN

Basic multi-function metering Power Meter Series PM3200

Functions and characteristics (cont.)

Specications (continued) PM3200 Range

Mechanical characteristics

Weight 0.26kg

IP degree of protection (IEC60529) IP40 front panel, IP20 meter body

Dimension 90 x 95 x 70mm

Environmental conditions

Operating temperature -25 ºC to +55 ºC

Storage temperature -40 ºC to +85 ºC

Humidity rating 5 to 95% RH at 50ºC (non-condensing)

Pullution degree 2

Metering category III, for distribution systems up to 277/480VAC

Dielectric withstand As per IEC61010-1, Doubled insulated front panel display

Altitude 3000m max

Electromagnetic compatibility

Electrostatic discharge Level IV (IEC61000-4-2)

Immunity to radiated elds Level III (IEC61000-4-3)

Immunity to fast transients Level IV (IEC61000-4-4)

Immunity to surge Level IV (IEC61000-4-5)

Conducted immunity Level III (IEC61000-4-6)

Immunity to power frequency magnetic elds 0.5mT (IEC61000-4-8)

Conducted and radiated emissions Class B (EN55022)

Safety

CE as per IEC61010-1 (1)

Communication

RS485 port Half duplex, from 9600 up to 38400 bauds, Modbus RTU (double insulation)

Display characteristics

Dimensions (VA) 43mm x 34.6mm

Display resolution 128 x 96 dots

Standard compliance

IEC61557-12, EN61557-12

IEC61010-1, UL61010-1

IEC62052-11, IEC62053-21, IEC62053-22, IEC62053-23

EN50470-1, EN50470-3

(1) Protected throughout by double insulation

Multi-tariff capability

The PM3200 range allows arrangement of kWh

consumption in four different registers. This can be

controlled by:

b Digital Inputs. Signal can be provided by PLC or utilities

b Internal clock programmable by HMI

b Through communication

This function allows users to:

b Make tenant metering for dual source applications to

differentiate backup source or utility source

b Understand well the consumption during working time

and non working time, and between working days and

weekends

b Follow up feeders consumption in line with utility tariff

rates

Power Meter Series PM3250

72 PLSED309005EN

Power Meter Series PM3200

Dimensions and connection

Basic multi-function metering

PM3200 series dimensions

PB105302

PM3200 top and lower aps PM3200 series easy installation

PB105446

PLSED309005EN

Basic multi-function metering PM5350

Functions and characteristics

PE86278

PowerLogic PM5350.

The PowerLogic PM5350 power meter offers all the measurement capabilities

required to monitor an electrical installation in a single 96 x 96 mm unit extending

only 44 mm behind the mounting surface.

With its large display, all three phases and neutral can be monitored simultaneously.

The bright, anti-glare display features large characters and powerful backlighting for

easy reading even in extreme lighting conditions and viewing angles. The meter

menus are understood by all, with the availability of three languages (English,

Chinese, Spanish) included standard in the PM5350.

Its compact size and high performance make the PowerLogic PM5350 suitable for

many applications.

Applications

Panel instrumentation.

Cost allocation or energy management.

Electrical installation remote monitoring.

Alarming with under/over, digital status, control power failure, meter reset,

self diagnostic issue.

Circuit Breaker monitoring and control with relay outputs and whetted digital inputs.

Main characteristics

Easy to install

Mounts using two clips, no tools required. Ultra compact meter with 44mm depth

connectable up to 480 VL-L without voltage transformers for installations compliant

with category III, as per IEC 61010-1. See specication table for UL voltage limits.

Easy to operate

Intuitive navigation with self-guided, language selectable menus, six lines, four

concurrent values. Two LEDs on the meter face help the user conrm normal

operation (heartbeat/communications indicator LED: green and other LED orange,

customizable either for alarms or energy pulse outputs).

Easy circuit breaker monitoring and control

The PM5350 provides two relay outputs (high performance) with capability to

command most of the circuit breaker coils directly. In addition, monitored switches

can be wired directly to the meter without external power supply.

System status at a glance

Bright, anti-glare, backlit display plus two LEDs; orange for energy pulse or alarm

and green for heartbeat/communications indication.

IEC 62053-22 class 0.5S accuracy for active energy

Accurate energy measurement for cost allocation.

Power Quality analysis

The PM5350 offers THD and TDD measurements as standard. Total Demand

Distortion is based on a point of common coupling (PCC), which is a common point

that each user receives power from the power source. The TDD compares the

contribution of harmonics versus the maximum demand load.

Load management

Peak demands with time stamping are provided. Predicted demand values can be

used in basic load shedding applications.

Alarming with time stamping

Over 30 alarm conditions, such as under/over conditions, digital input changes, and

phase unbalance inform you of events. A time-stamped log maintains a record of the

last 40 alarm events.

Load timer

Load timer setpoint adjustable to monitor and advise maintenance requirements.

Performance Standard Meets IEC 61557-12 PMD/S/K70/0.5.

Part numbers

PowerLogic PM5350 meters

PowerLogic PM5350 METSEPM5350

74 PLSED309005EN

Basic multi-function metering PM5350

Functions and characteristics (cont.)

General

Use on LV and MV systems b

Basic metering with THD and min/max readings b

Instantaneous rms values

Current Total, Phases and neutral b

Voltage Total, Ph-Ph and Ph-N b

Frequency b

Real, reactive, and

apparent power

Total and per phase Signed

True Power Factor Total and per phase Signed, Four Quadrant

Displacement PF Total and per phase Signed, Four Quadrant

Unbalanced I, VL-N, VL-L b

Energy values Stored in

non-volatile

memory

Accumulated Active, Reactive and Apparent Energy Received/Delivered;

Net and absolute;

Demand values

Current average Present, Last, Predicted,

Peak, & Peak Date Time

Active power Present, Last, Predicted,

Peak, & Peak Date Time

Reactive power Present, Last, Predicted,

Peak, & Peak Date Time

Apparent power Present, Last, Predicted,

Peak, & Peak Date Time

Peak demand with timestamping D/T for current & powers b b

Demand calculation Sliding, xed and rolling block,

thermal

b b

Synchronization of the measurement window b b

Other measurements

I/O timer b b

Operating timer b b

Active load timer b b

Alarm counters b b

Power quality measurements

THD, thd (Total Harmonic Distortion) I,VLN, VLL

TDD, thd (Total Demand Distortion) b

Data recording

Min/max of instantaneous values, plus phase

identication

b b

Alarms with 1s timestamping Standard 29; Unary 4;

Digital 4

Alarms stored in non-volatile memory 40 events b

Inputs/Outputs

Digital inputs 4 (DI1, DI2, DI3, DI4)

Digital outputs 2 relay outputs (DO1,

DO2)

Display

White backlit LCD display, 6 lines, 4 concurrent values b

IEC or IEEE visualization mode b

Communication

Modbus RTU, Modbus ASCII, Jbus Protocol b

Firmware update via RS485 serial port

(DLF3000 via the Schneider Electric website:

www.schneider-electric.com)

PLSED309005EN

Basic multi-function metering PM5350

Functions and characteristics (cont.)

Front screen view of PM5350.

Electrical characteristics

PE86292

Type of measurement True rms up to the 15th harmonic on three-phase

(3P, 3P + N)

32 samples per cycle, zero blind

Measurement

accuracy

Current, Phase (1)±0.30%

Voltage, L-N (1)±0.30%

Power Factor (1)±0.005

Power, Phase IEC 61557-12 Class 0.5; For 5 A nominal CT (for 1 A

nominal CT when I > 0.15A)

±0.5% from 0.25 A to 9.0 A at COS φ = 1

±0.6% from 0.50 A to 9.0 A at COS φ = 0.5 (ind or cap)

Frequency (1)±0.05%

Real Energy IEC 62053-22 Class 0.5S; IEC 61557-12 Class 0.5;

For 5 A nominal CT (for 1 A nominal CT when I > 0.15A)

±0.5% from 0.25 A to 9.0 A at COS φ = 1

±0.6% from 0.50 A to 9.0 A at COS φ = 0.5 (ind or cap)

IEC 61557-12 Class 0.5

Reactive Energy IEC 62053-23 Class 3, IEC 61557-12 Class 2

For 5 A nominal CT (for 1 A nominal CT when I > 0.15A)

±2.0% from 0.25 A to 9.0 A at SIN φ = 1

±2.5% from 0.50 A to 9.0 A at SIN φ = 0.5 (ind or cap)

Data update rate 1 second nominal (50/60 cycles)

Input-voltage VT primary 1.0 MV AC max, starting voltage depends on VT ratio.

U nom 277 V L-N

Measured voltage with

overrange & Crest Factor

IEC: 20 to 480 V AC L-L; 20 to 277 V AC L-N, CAT III

IEC: 20 to 690 V AC L-L; 20 to 400 V AC L-N, CAT II

UL: 20 to 300 V AC L-L, CAT III

Permanent overload 700 Vac L-L, 404 Vac L-N

Impedance 10 M ww

Frequency range 45 to 70 Hz

Input-current CT ratings Primary Adjustable 1 A to 32767 A

Secondary 1A, 5 A nominal

Measured voltage with

overrange & Crest Factor

5 mA to 9 A

Withstand Continuous 20 A,10 sec/hr 50 A,1 sec/hr 500 A

Impedance < 0.3 mW

Frequency range 45 to 70 Hz

Burden < 0.024 VA at 9 A

AC control

power

Operating range 85 - 265 V AC

Burden 4.1 VA / 1.5 W typical, 6.7 VA / 2.7 W max at 120 V AC

6.3 VA / 2.0 W typical, 8.6 VA / 2.9 W max at 230 V AC

9.6 VA / 3.5 W maximum at 265 V AC

Frequency 45 to 65 Hz

Ride-through time 100 mS typical at 120 V AC and maximum burden

400 mS typical at 230 V AC and maximum burden

DC control

power

Operating range 100 to 300 V DC

Burden 1.4 W typical, 2.6 W maximum at 125 V DC

1.8 W typical, 2.7 W maximum at 250 V DC

3.2 W maximum at 300 V DC

Ride-through time 50 mS typical at 125 V DC and maximum burden

Real time clock Ride-through time 30 seconds

Digital output Number/Type 2 - Mechanical Relays

Output frequency 0.5 Hz maximum (1 second ON / 1 second OFF -

minimum times)

Switching Current 250 V AC at 2.0 Amps, 200 k cycles, resistive

250 V AC at 8.0 Amps, 25 k cycles, resistive

250 V AC at 2.0 Amps, 100 k cycles, COSΦ=0.4

250 V AC at 6.0 Amps, 25 k cycles, COSΦ=0.4

30 V DC at 2.0 Amps, 75 k cycles, resistive

30 V DC at 5.0 Amps, 12.5 k cycles, resistive

Isolation 2.5 kVrms

Status Digital

Inputs

Voltage ratings ON 18.5 to 36 V DC, OFF 0 to 4 V DC

Input Resistance 110 k W

Maximum Frequency 2 Hz (T ON min = T OFF min = 250 ms)

Response Time 10 ms

Isolation 2.5 kVrms

Whetting output Nominal voltage 24 V DC

Allowable load 4 mA

Isolation 2.5 kVrms

(1) Measurements taken from 45 Hz to 65 Hz, 0.5 A to 9 A, 57 V to 347 V & 0.5 ind to 0.5 cap

power factor with a sinusoidal wave.

76 PLSED309005EN

Basic multi-function metering PM5350

Functions and characteristics (cont.)

Mechanical characteristics

Weight 250 g

IP degree of protection (IEC 60529) IP51 front display, IP30 meter body

Dimensions W x H x D 96 x 96 x 44 mm (depth of meter from housing

mounting ange)

96 x 96 x 13 mm (protrusion of meter from housing ange)

Mounting position Vertical

Panel thickness 6.35 mm maximum

Environmental characteristics

Operating

temperature

Meter -25 °C to 70 °C

Display -20 °C to +70 °C

(Display functions to -25°C with reduced performance)

Storage temp. Meter + display -40 °C to +85 °C

Humidity rating 5 to 95 % RH at 50 °C (non-condensing)

Pollution degree 2

Altitude 3000 m max.

Electromagnetic compatibility

Electrostatic discharge IEC 61000-4-2(1)

Immunity to radiated elds IEC 61000-4-3(1)

Immunity to fast transients IEC 61000-4-4(1)

Immunity to impulse waves IEC 61000-4-5(1)

Conducted immunity IEC 61000-4-6(1)

Immunity to magnetic elds IEC 61000-4-8(1)

Immunity to voltage dips IEC 61000-4-11(1)

Radiated emissions FCC part 15 class A, EN 55011 Class A

Conducted emissions FCC part 15 class A, EN 55011 Class A

Harmonics IEC 61000-3-2(1)

Flicker emissions IEC 61000-3-3(1)

Safety

Europe e, as per IEC 61010-1

U.S. and Canada cULus as per UL61010-1, IEC 61010-1 (3rd Edition)

Measurement category (Voltage and

current inputs)

Per IEC 61010-1:

CAT III, 277 V L-N / 480 V L-L nominal;

CAT II 400 V L-N / 690 V L-L nominal

Per UL 61010-1 and CSA C22.2 No. 61010-1:

CAT III, 300 V L-L

Overvoltage Category (Control power) CAT III

Dielectric As per IEC 61010-1

Double insulated front panel display

Protective Class II

Communication

RS 485 port 2-Wire, 9600,19200 or 38400 baud, Parity - Even, Odd,

None, 1 stop bit if parity Odd or Even, 2 stop bits if None;

Modbus RTU, Modbus ASCII (7 or 8 bit), JBUS

Firmware and language le update Update via comunication port using DLF3000 software

Isolation 2.5 kVrms, double insulated

Human machine interface

Display type Monochrome Graphics LCD

Resolution 128 x 128

Backlight White LED

Viewable area (W x H) 67 x 62.5 mm

Keypad 4-button

Indicator Heartbeat / Comm activity Green LED

Energy pulse output / Active alarm indication (congurable)

Type Optical, amber LED

Wavelength 590 to 635 nm

Maximum pulse rate 2.5 kHz

(1) As per IEC 61557-12

PLSED309005EN

Basic multi-function metering PM5350 Power Meter

Dimensions and connection

Rear of meter - open

PE86279

Rear view retainers - installation

PE86274

For detailed installation instructions see the product's Installation guide.

78 PLSED309005EN

Basic multi-function metering PM5350 Power Meter

Dimensions and connection (cont.)

Rear view retainers - users

PE86275

For detailed installation instructions see the product's Installation guide.

PM5350 meter parts

A Retainer clips.

B Control power supply connector.

C Voltage inputs.

D Digital outputs.

E Rs485 port (COM1).

F Digital outputs.

G Optical revenue switch.

H Current inputs.

PE86324

PE86323

PLSED309005EN

Basic multi-function metering PM5350IB / PM5350PB

Functions and characteristics

PE86278

PowerLogic PM5350IB

The PM5350IB and PM5350PB are compact multi-circuit power meters specially

designed to monitor Busway power distribution systems. They provide consumption

and alarm data by circuit, for up to three single phase circuits. It can also be installed

in different electrical congurations, monitoring 1, 2 and 3 phase circuits. Ideal

solution for cost management and sub-billing in datacenters.

With its large display, all individual circuits can be monitored simultaneously. The

bright, anti-glare display features large characters and powerful backlighting for easy

reading even in extreme lighting conditions and viewing angles.

Main characteristics

Easy to install

Mounts using two clips, no tools required. Ultra compact meter with 44mm depth

connectable up to 480 V L-L without voltage transformers. See specication table for

voltage inputs details.

Easy to operate

Intuitive navigation with self-guided, language selectable menus, six lines, four

concurrent values.

System status at a glance

Bright, anti-glare, backlit display plus two LEDs; orange for energy pulse or alarm

and green for heartbeat/communications indication.

IEC 62053-22 class 0.5S accuracy for active energy

Accurate energy measurement for cost allocation and sub-billing.*

Circuit breaker monitoring

Four digital inputs provide an easy way to monitor status, alarm and report on circuit

breaker trips.

Multi-level alarming

Five different alarm levels (high, high-high, low, low-low, tripped) optimized network

management and downtime prevention.

Performance Standard Meets IEC 61557-12 PMD/S/K70/0.5.

PowerLogic PM5350IB/PB meters

PowerLogic PM5350IB METSEPM5350IB

PowerLogic PM5350PB METSEPM5350PB

Part Numbers

80 PLSED309005EN

Basic multi-function metering PM5350IB / PM5350PB

Functions and characteristics (cont.)

General 5350IB 5350PB

Use on LV and MV systems b

Basic metering with THD and min/max readings b

Instantaneous rms values

Current Total, Phases and neutral b

Voltage Total, Ph-Ph and Ph-N b

Frequency b

Real, reactive, and

apparent power

Total and per phase Signed

True Power Factor Total and per phase Signed, Four Quadrant

Displacement PF Total and per phase Signed, Four Quadrant

Unbalanced I, VL-N, VL-L b

Energy Total and per circuit

Accumulated Active, Reactive

and Apparent Energy*

Received/Delivered;

Net and absolute

Demand values

Current average* Present, Last, Predicted,

Peak, & Peak Date Time

Active power*Present, Last, Predicted,

Peak, & Peak Date Time

Reactive power*Present, Last, Predicted,

Peak, & Peak Date Time

Apparent power*Present, Last, Predicted,

Peak, & Peak Date Time

Peak demand with timestamping*b

Power quality

THD, thd (Total Harmonic Distortion)

TDD, thd (Total Demand Distortion)

I,VLN, VLL

Data recording Total and per circuit

Min/max of instantaneous values, plus circuit

identication*

Alarms with 1s timestamping Standard 29; Unary 4; Digital 4

Alarms stored in non-volatile memory*40 events b

Inputs/Outputs

Digital inputs 4 (DI1, DI2, DI3, DI4)

Digital outputs 2 relay outputs (DO1, DO2)

Display

White backlit LCD display, 6 lines, 4 concurrent values b

IEC or IEEE visualization mode b

Communication

Modbus RTU, Modbus ASCII, Jbus Protocol b

Firmware update via RS485 serial port

(DLF3000 via the Schneider Electric website:

www.schneider-electric.com)

*Stored in non-volatile memory

PLSED309005EN

Basic multi-function metering PM5350IB / PM5350PB

Functions and characteristics (cont.)

Front screen view of PM5350.

Electrical characteristics 5350IB 5350PB

PE86292

Type of measurement True rms up to the 15th harmonic

32 samples per cycle, zero blind

Measurement

accuracy

Current, Circuit (1)±0.30%

Voltage, L-N (1)±0.30%

Power Factor (1)±0.005

Power, Circuit IEC 61557-12 Class 0.5; For 5 A nominal CT (for 1 A

nominal CT when I > 0.15A)

±0.5% from 0.25 A to 9.0 A at COS φ = 1

±0.6% from 0.50 A to 9.0 A at COS φ = 0.5 (ind or cap)

Frequency (1)±0.05%

Real Energy IEC 62053-22 Class 0.5S; IEC 61557-12 Class 0.5;

For 5 A nominal CT (for 1 A nominal CT when I > 0.15A)

±0.5% from 0.25 A to 9.0 A at COS φ = 1

±0.6% from 0.50 A to 9.0 A at COS φ = 0.5 (ind or cap)

IEC 61557-12 Class 0.5

Reactive Energy IEC 62053-23 Class 3, IEC 61557-12 Class 2

For 5 A nominal CT (for 1 A nominal CT when I > 0.15A)

±2.0% from 0.25 A to 9.0 A at SIN φ = 1

±2.5% from 0.50 A to 9.0 A at SIN φ = 0.5 (ind or cap)

Data update rate 1 second nominal (50/60 cycles)

Input-voltage VT primary 1.0 MV AC max, starting voltage depends on VT ratio.

U nom 277 V L-N

Measured voltage with

overrange & Crest Factor

UL: 20 to 300 V AC L-L

IEC: 20 to 690V V AC L-L;

20 to 400 V AC L-N

UL: 20 to 480 V AC L-L

IEC: 20 to 690 V V AC

L-L; 20 to 277 V AC L-N

Permanent overload 700 V AC L-L, 404 Vac L-N

Impedance 10 M W

Frequency range 45 to 70 Hz

Input-current CT ratings Primary Adjustable 1 A to 32767 A

Secondary 1A, 5 A nominal

Measured voltage with

overrange & Crest Factor

5 mA to 9 A

Withstand Continuous 20 A,10 sec/hr 50 A,1 sec/hr 500 A

Impedance < 0.3 mW

Frequency range 45 to 70 Hz

Burden < 0.024 VA at 9 A

AC control

power

Operating range 85 - 277 V AC

Burden 4.1 VA / 1.5 W typical, 6.7 VA / 2.7 W max at 120 V AC

6.3 VA / 2.0 W typical, 8.6 VA / 2.9 W max at 230 V AC

9.6 VA / 3.5 W maximum at 265 V AC

Frequency 45 to 65 Hz

Ride-through time 100 mS typical at 120 V AC and maximum burden

400 mS typical at 230 V AC and maximum burden

DC control

power

Operating range 100 to 300 V DC

Burden 1.4 W typical, 2.6 W maximum at 125 V DC

1.8 W typical, 2.7 W maximum at 250 V DC

3.2 W maximum at 300 V DC

Ride-through time 50 mS typical at 125 V DC and maximum burden

Real time clock Ride-through time 30 seconds

Digital output Number/Type 2 - Mechanical Relays

Output frequency 0.5 Hz maximum (1 second ON / 1 second OFF -

minimum times)

Switching Current 250 V AC at 2.0 Amps, 200 k cycles, resistive

250 V AC at 8.0 Amps, 25 k cycles, resistive

250 V AC at 2.0 Amps, 100 k cycles, COSΦ=0.4

250 V AC at 6.0 Amps, 25 k cycles, COSΦ=0.4

30 V DC at 2.0 Amps, 75 k cycles, resistive

30 V DC at 5.0 Amps, 12.5 k cycles, resistive

Isolation 2.5 kVrms

Status Digital

Inputs

Voltage ratings ON 18.5 to 36 V DC, OFF 0 to 4 V DC

Input Resistance 110 k W

Maximum Frequency 2 Hz (T ON min = T OFF min = 250 ms)

Response Time 10 ms

Isolation 2.5 kVrms

Whetting output Nominal voltage 24 V DC

Allowable load 4 mA

Isolation 2.5 kVrms

(1) Measurements taken from 45 Hz to 65 Hz, 0.5 A to 9 A, 57 V to 347 V & 0.5 ind to 0.5 cap

power factor with a sinusoidal wave.

82 PLSED309005EN

Basic multi-function metering PM5350IB / PM5350PB

Functions and characteristics (cont.)

Mechanical characteristics 5350IB 5350PB

Weight 250 g

IP degree of protection (IEC 60529) IP51 front display, IP30 meter body

Dimensions W x H x D 96 x 96 x 44 mm (depth of meter from housing

mounting ange)

96 x 96 x 13 mm (protrusion of meter from housing ange)

Mounting position Vertical

Panel thickness 6.35 mm maximum

Environmental characteristics (for indoor use only)

Operating

temperature

Meter -25 °C to 70 °C

Display -20 °C to +70 °C

(Display functions to -25°C with reduced performance)

Storage temp. Meter + display -40 °C to +85 °C

Humidity rating 5 to 95 % RH at 50 °C (non-condensing)

Pollution degree 2

Altitude 3000 m max.

Electromagnetic compatibility (for indoor use only)

Electrostatic discharge IEC 61000-4-2(2)

Immunity to radiated elds IEC 61000-4-3(2)

Immunity to fast transients IEC 61000-4-4(2)

Immunity to impulse waves IEC 61000-4-5(2)

Conducted immunity IEC 61000-4-6(2)

Immunity to magnetic elds IEC 61000-4-8(2)

Immunity to voltage dips IEC 61000-4-11(2)

Radiated emissions FCC part 15 class A, EN 55011 Class A

Conducted emissions FCC part 15 class A, EN 55011 Class A

Harmonics IEC 61000-3-2(2)

Flicker emissions IEC 61000-3-3(2)

Safety

Europe e, as per IEC 61010-1

U.S. and Canada cULus as per UL61010-1, IEC 61010-1 (2nd Edition)

Measurement category (Voltage and

current inputs)

UL: 20 to 300 V AC L-L,

CATIII

IEC: 20 to 480V V AC L-L;

20 to 277 V AC L-N,

CATIII

20 to 690V V AC L-L; 20

to 400 V AC L-N, CATII

UL: 20 to 480 V AC L-L

(3rd Edition), CATIII

IEC: 20 to 480V V AC L-L;

20 to 277 V AC L-N,

CATIII

20 to 690V V AC L-L; 20

to 400 V AC L-N, CATII

Overvoltage Category (Control power) CAT III

Dielectric As per IEC 61010-1

Double insulated front panel display

Protective Class II

Communication

RS 485 port 2-Wire, 9600,19200 or 38400 baud, Parity - Even, Odd,

None, 1 stop bit if parity Odd or Even, 2 stop bits if None;

Modbus RTU, Modbus ASCII (7 or 8 bit), JBUS

Firmware and language le update Update via comunication port using DLF3000 software

Isolation 2.5 kVrms, double insulated

Human machine interface

Display type Monochrome Graphics LCD

Resolution 128 x 128

Backlight White LED

Viewable area (W x H) 67 x 62.5 mm

Keypad 4-button

Indicator Heartbeat / Comm activity Green LED

Energy pulse output / Active alarm indication (congurable)

Type Optical, amber LED

Wavelength 590 to 635 nm

Maximum pulse rate 2.5 kHz

(1) V L-L is limited to 700 V AC

PLSED309005EN

Basic multi-function metering PM5350 Power Meter

Dimensions and connection

Parts of PM5350IB and PM5350PB (rear panel door removed)

PM5350PB

PM5350IB

PB113626PB113626

For detailed installation instructions see the product's Installation guide.

A Control power

B Voltage inputs

C Current inputs

D Digital inputs

E Whetting voltage source (for digital inputs)

F RS-485 communications

G Digital outputs

H Retainer clips

84 PLSED309005EN

Basic multi-function metering PM5350IB / PM5350PB

Dimensions and connection (cont.)

Installation

PM5350PB

For detailed installation instructions see the product's Installation guide.

PM5350IB

PB113742PB113743

PB113624

PB113625

Dimensions PM5350PB

Dimensions PM5350IB

PLSED309005EN

Basic multi-function metering PM5000 Series

Functions and characteristics

PB111777

PowerLogic™ PM5000 Series meter

PowerLogic™ PM5100, PM5300 and PM5500 series

The PowerLogic™ PM5000 power meter is the ideal t for cost management

applications. It provides the measurement capabilities needed to allocate energy usage,

perform tenant metering and sub-billing, pin-point energy savings, optimize equipment

efciency and utilization, and perform a high level assessment of the power quality of the

electrical network.

In a single 96 x 96 mm unit, with a graphical display, (plus optional remote display) all

three phases, neutral and ground can be monitored simultaneously.

The bright, anti-glare display features large characters and powerful backlighting

for easy reading even in extreme lighting conditions and viewing angles. Easy to

understand menus, text in 8 selectable languages, icons and graphics create a

friendly environment to learn about your electrical network. Ethernet gateway and

enhanced cyber security.

Highly accurate devices with global billing certications.

Applications

Cost management: Cost saving opportunities become clear once you understand

how and when your facility uses electricity. The PowerLogic™ PM5000 series meters

are ideal for:

bSub billing / tenant metering: allows a landlord, property management rm,

condominium association, homeowners association, or other multi-tenant property to

bill tenants for individual measured utility (electricity) usage. MID approved meters for

billing applications across Europe.

bCost allocation: allocate energy costs between different departments (HVAC,

indoor and outdoor lighting, refrigeration, etc), different parts of an industrial process

or different cost centres. Cost allocation systems can help you save money by making

changes to your operation, better maintaining your equipment, taking advantage of

pricing uctuations, and managing your demand.

Network management: Improving reliability of the electrical network is key for

success in any business. Monitoring values such as voltage levels, harmonic

distortion and voltage unbalance will help you to ensure proper operation and

maintenance of your electrical network and equipment. PowerLogic™ PM5000 series

meters are the perfect tool for:

bBasic Power Quality monitoring: power quality phenomena can cause

undesirable effects such as heating in transformers, capacitors, motors, generators

and misoperation of electronic equipment and protection devices.

bMin/ Max monitoring (with timestamp): understanding when electrical

parameters, such as voltage, current and power demand, reach maximum and

minimum values will give you the insight to correctly maintain your electrical network

and assure equipment will not be damaged.

bAlarming: alarms help you to be aware of any abnormal behavior on the electrical

network in the moment it happens.

bWAGES monitoring: take advantage of the input metering on PM5000 meters to

integrate measurements from 3rd party devices such as water, air, gas, electricity or

steam, meters.

Main characteristics

Easy to install

Mounts using two clips, in standard cut out for DIN 96 x 96mm, no tools required.

Compact meter with 72mm (77mm for PM5500) depth connectable up to 690 VL-L

without voltage transformers for installations compliant with category III. Optional

remote display (PM5563). Ethernet gateway functionality via RS-485 port.

Easy to operate

Intuitive navigation with self-guided, language selectable menus, six lines, four

concurrent values. Two LEDs on the meter face help the user conrm normal

operation with a green LED - heartbeat/communications indicator, and the amber

LED - customizable either for alarms or energy pulse outputs. Onboard web pages

(PM5500) show real-time and logged information, and verify communications.

Easy circuit breaker monitoring and control

The PM5300 provides two relay outputs (high performance Form A type) with

capability to command most of the circuit breaker coils directly. For Digital Inputs,

monitored switches can be wired directly to the meter without external power supply.

PM5500 series have 4 status inputs (digital) and 2 digital output (solid state) to use for

Accurate energy measurement for precise cost allocation:

PM5100 PM5300 PM5500

IEC 62053-22 (Active Energy) Class 0.5S Class 0.5S Class 0.2S

IEC 62053-23 (Reactive Energy) Class 2 Class 2 Class 1

PowerLogic™ PM5563 remote dispaly

PB111784

Commercial reference numbers

PM5100 METSEPM5100

PM5110 METSEPM5110

PM5111 METSEPM5111

PM5310 METSEPM5310

PM5320 METSEPM5320

PM5330 METSEPM5330

PM5331 METSEPM5331

PM5340 METSEPM5340

PM5341 METSEPM5341

PM5560 METSEPM5560

PM5561 METSEPM5561

PM5563 METSEPM5563

PM5563RD METSEPM5563RD

PM5RD METSEPM5RD

86 PLSED309005EN

Basic multi-function metering PM5000 Series

Functions and characteristics (cont.)

Direct metering of neutral current

The PM5500 has a fourth CT for measuring neutral current. In demanding IT

applications, where loads are non-linear (i.e. switching power supplies on

computers/servers), measuring neutral current is essential to avoid overload and

resulting outage. In addition, the PM5500 provides a calculated ground current

value, not available in meters with 3 CTs.

Power Quality analysis

The PM5000 offers Total Harmonic Distortion (THD/thd), Total Demand

Distortion (TDD) measurements and individual harmonics (odd) magnitudes and

angles for voltage and current:

These types of power quality parameters help to identify the source of harmonics

that can harm transformers, capacitors, generators, motors and electronic

equipment.

Load management

Peak demands with time stamping are provided. Predicted demand values can be

used in combination with alarms for basic load shedding applications.

Alarming with time stamping

A different combination of set point driven alarms and digital alarms with 1s time

stamping are available in the PM5000 family:

Alarms can be visualized as Active (the ones that have picked up and did not drop

out yet) or Historical (the ones that happened in the past). Alarms can be

programmed and combined to trigger digital outputs and mechanical relays

(PM5300).

The PM5000 series keeps an alarm log with the active and historical alarms with

date and time stamping. SMTP protocol for receiving alarm conditions via email and

text. SNTP protocol for date/time network synchronization.

Load timer

A load timer can be set to count load running hours based on a minimum current

withdraw, adjustable to monitor and advise maintenance requirements on the load.

High Performance and accuracy

IEC 61557-12 Performance measuring and monitoring devices (PMD)

Denes the performance expectation based on classes. It denes the allowable error

in the class for real and reactive power and energy, frequency, current, voltage,

power factor, voltage unbalance, voltage and current harmonics (odds), voltage

THD, current THD, as well as ratings for temperature, relative humidity, altitude,

start-up current and safety. It makes compliant meters readings comparable - they

will measure the same values when connected to the same load.

Meets IEC 61557-12 PMD/[SD|SS]/K70/0.5 for PM5100 and PM5300

Meets IEC 61557-12 PMD/[SD|SS]/K70/0.2 for PM5500

Legal billing compliance

MID compliance is compulsory for billing applications across Europe.

In addition to billing applications, for facility managers responsible for energy cost

MID means same level of quality as a billing meter.

MID ready compliance, EN50470-1/3 – Class C

Certied according to MID Directive,

Annex "B" + Annex "D" for legal

metrology relevant to active electrical

energy meters (see Annex MI-003 of MID). Can be

used for scal (legal) metrology.

MID

PM5100 PM5300 PM5500

Individual Harmonics magnitudes

up to 15th

magnitudes

up to 31st

magnitudes &

angles

up to 63rd

PM5100 PM5300 PM5500

Set point driven alarms 29 29 29

Unary 4 4 4

Digital – 2 4

Boolean / Logic – – 10

Custom dened – – 5

PB111777

PB111772

PB111768

PowerLogic™ PM5500 meter

PowerLogic™ PM5300 meter

PowerLogic™ PM5100 meter

PLSED309005EN

Basic multi-function metering PM5000 Series

Functions and characteristics (cont.)

General PM5100 PM5300 PM5500

Use on LV and MV systems b

Basic metering with THD and min/max readings b

Instantaneous rms values

Current per phase, neutral and ground

(PM5500)

Voltage Total, per phase L-L and L-N b

Frequency b

Real, reactive, and

apparent power

Total and per phase Signed, Four Quadrant

True Power Factor Total and per phase Signed, Four Quadrant

Displacement PF Total and per phase Signed, Four Quadrant

% Unbalanced I, VL-N, VL-L b

Direct monitoring of neutral current b

Energy values*

Accumulated Active, Reactive and Apparent Energy Received/Delivered; Net and absolute; Time Counters

Demand values*

Current average Present, Last, Predicted, Peak, and Peak Date Time

Active power Present, Last, Predicted, Peak, and Peak Date Time

Reactive power Present, Last, Predicted, Peak, and Peak Date Time

Apparent power Present, Last, Predicted, Peak, and Peak Date Time

Peak demand with time stamping D/T for current and b

Demand calculation Sliding, xed and rolling block,

thermal methods

Synchronization of the measurement window to input,

communication command or internal clock

Settable Demand intervals b

Demand calculation for Pulse input (WAGES) b

Other measurements*

I/O timer b

Operating timer b

Load timer b

Alarm counters and alarm logs b

Power quality measurements

THD, thd (Total Harmonic Distortion) I, VLN, VLL per phase I,VLN, VLL

TDD (Total Demand Distortion) b

Individual harmonics (odds) 15th 31st 63rd

Neutral Current metering with ground current calculation b

Data recording

Min/max of instantaneous values, plus phase identication* b

Alarms with 1s timestamping* b

Data logging 2 selectable parameters from

kWh, kVAh, kVARh

with congurable interval and

duration (e.g. 2 parameters for

60 days at 15 minutes interval)

Up to 14 selectable parameters

with congurable interval and

duration (e.g. 6 parameters for 90

days at 15 minutes interval)

Memory capacity 256 kB 1.1 MB

Min/max log b b b

Maintenance, alarm and event logs b b

Customizable data logs b

Inputs / Outputs / Mechanical Relays

Digital inputs 24

Digital outputs 1 (kWh only) 2 (congurable)

Form A Relay outputs 2

Timestamp resolution in seconds 1

Whetting voltage b

*Stored in non-volatile memory

88 PLSED309005EN

Basic multi-function metering PM5000 Series

Functions and characteristics (cont.)

Electrical characteristics PM5100 PM5300 PM5500

Type of measurement: True rms on three-phase

(3P, 3P + N), zero blind

64 samples per cycle 128 samples per cycle

Measurement

accuracy

Active Energy 0.5% 0.2%

Reactive Energy 2% 1%

Active Power 0.5% 0.2%

Apparent Power 0.5%

Current, Phase 0.5% 0.15%

Voltage, L-N 0.5% 0.1%

Frequency 0.05%

Measurement

accuracy

compliance

Measurement accuracy IEC 61557-12 PMD/[SD|SS]/K70/0.5 IEC 61557-12 PMD/[SD|SS]/

K70/0.2

Active energy accuracy IEC 62053-22 Class 0.2 S ANSI C12.20 Class 0.5 IEC 62053-22 Class 0.2 S ANSI

C12.20 Class 0.2

Reactive energy accuracy IEC 62053-23 Class 2

Input-voltage

(up to 1.0 MV

AC max, with

voltage

transformer)

Nominal Measured Voltage range 20 V L-N / 35 V L-L to 400 V L-N /690 V L-L

absolute range 35 V L-L to 760 V L-L

20 V L-N / 20 V L-L to 400 V L-N

/690 V L-L

absolute range 20 V L-L to 828 V L-L

Impedance 5 M Ω

F nom 50 or 60 Hz ±2% 50 or 60 Hz ±10%

Input-current I nom 1 A or 5 A

Measured Amps with over range and Crest

Factor

Starting current: 5mA

Operating range: 50mA to 8.5A

Starting current: 5m A

Operating range: 50 mA to 10 A

Withstand Continuous 20A, 10s/hr 50A, 1s/hr 500A

Impedance < 0.3 mΩ

F nom 50 or 60 Hz ±2% 50 or 60 Hz ±10%

Burden <0.026VA at 8.5A < 0.024 VA at 10 A

AC control

power

Operating range 100-415 VAC +/- 10%

CAT III 300V class per IEC 61010

100-480 V AC ±10%

CAT III 600V class per IEC 61010

Burden <5 W,11 VA at 415V L-L <5W/16.0 VA at 480 V A C

Frequency 45 to 65 Hz

Ride-through time 80 mS typical at 120V AC and maximum burden.

100 mS typical at 230 V AC and maximum burden

100 mS typical at 415 V AC and maximum burden

35 ms typical at 120 V L-N and

maximum burden

129 ms typical at 230 V L-N and

maximum burden

DC control

power

Operating range 125-250 V DC ±20%

Burden 4W max at 125V DC typical 3.1W at 125 V DC, max. 5W

Ride-through time 50 mS typical at 125 V DC and maximum burden

Outputs Relay Max output frequency 0.5 Hz maximum (1 second ON / 1

second OFF - minimum times)

Switching current 250 V AC at 8.0 Amps, 25 k cycles,

resistive

30 V DC at 2.0 Amps, 75 k cycles,

resistive 30 V DC at 5.0 Amps,

12.5 k cycles, resistive

Isolation 2.5 kV rms

Digital

outputs

1 2 2

Max load voltage 40 V DC 30 V AC / 60 V DC

Max load current 20 mA 125 mA

On Resistance 50 Ω max 8 Ω

Meter constant from 1 to 9,999,999 pulses per kWh

k_h (Congurable for delivered or received or delivered+received energy for kWh or kVARh or kVAh)

Pulse width for Digital

Output

50% duty cycle

Pulse frequency for Digital

Output

25 Hz max.

Leakage current 0.03 micro Amps 1 micro Amps

Isolation 5 kV rms 2.5 kV rms

Optical outputs

Pulse width (LED) 200 micro seconds

Pulse frequency 50 Hz. max. 2.5 kHz. max

Meter constant from 1 to 9,999,999 pulses per kWh

k_h (Congurable for delivered or received or delivered+received energy for kWh or kVARh or kVAh)

PLSED309005EN

Basic multi-function metering PM5000 Series

Functions and characteristics (cont.)

Electrical characteristics (cont'd) PM5100 PM5300 PM5500

Status Inputs ON Voltage 18.5 to 36 V DC 30 V AC / 60 V DC max

OFF Voltage 0 to 4 V DC

Input Resistance 110 k Ω 100 k Ω

Maximum Frequency 2 Hz (T ON min = T OFF min = 250

ms)

25 Hz (T ON min = T OFF min = 20

ms)

Response Time 20 ms 10 ms

Opto Isolation 5 kV rms 2.5 kV rms

Whetting output 24 V DC/ 8mA max

Input Burden 2mA @24V DC 2 mA @ 24 V AC/DC

Mechanical characteristics

Product weight 380 g 430 g 450 g

IP degree of protection (IEC 60529) IP52 front display, IP20 meter body

Dimensions W x H x D [protrusion from cabinet] * 96 x 96 x 72mm (77mm for PM5500) (depth of meter from housing mounting ange) [13mm]

Mounting position * Vertical

Panel thickness 6 mm maximum

Environmental characteristics

Operating

temperature

Meter -25 °C to 70 °C

Display (Display functions to -25º with

reduced performance)

-25 °C to +70 °C

Storage temp. -40 °C to +85 °C

Humidity range 5 to 95 % RH at 37 °C (non-condensing)

Polution degree 2

Altitude 2000 m CAT III / 3000 m CAT II 3000 m max. CAT III

Electromagnetic compatibility**

Harmonic current emissions IEC 61000-3-2

Flicker emissions IEC 61000-3-3

Electrostatic discharge IEC 61000-4-2

Immunity to radiated elds IEC 61000-4-3

Immunity to fast transients IEC 61000-4-4

Immunity to surge IEC 61000-4-5

Conducted immunity 150kHz to 80MHz IEC 61000-4-6

Immunity to magnetic elds IEC 61000-4-8

Immunity to voltage dips IEC 61000-4-11

Radiated emissions FCC part 15, EN 55022 Class B

Conducted emissions FCC part 15, EN 55022 Class B

* PM5563 is DIN mounted

** Tests are conducted as per IEC 61557-12 (IEC 61326-1), 62052-11 and EN50470

90 PLSED309005EN

Basic multi-function metering PM5000 Series

Functions and characteristics (cont.)

Safety PM5100 PM5300 PM5500

Europe CE, as per IEC 61010-1 Ed. 3, IEC 62052-11 & IEC61557-12

U.S. and Canada cULus as per UL61010-1 (3rd Edition)

Measurement category (Voltage and Current inputs) CAT III up to 400 V L-N / 690 V L-L

Dielectric As per IEC/UL 61010-1 Ed. 3

Protective Class II, Double insulated for user accessible parts

Communication

RS 485 port Modbus RTU, Modbus ASCII

(7 or 8 bit), JBUS

2-Wire, 9600,19200 or 38400 baud, Parity - Even, Odd, None, 1 stop bit if parity Odd or Even, 2 stop bits if None;

(Optional in PM51x and PM53x)

Ethernet port: 10/100 Mbps; Modbus TCP/IP 1 Optional 2 (for daisy chain only, one IP

address)

Firmware and language le update Meter rmware update via the communication ports

Isolation 2.5 kVrms, double insulated

Human machine interface

Display type Monochrome Graphics LCD

Resolution 128 x 128

Backlight White LED

Viewable area (W x H) 67 x 62.5 mm

Keypad 4-button

Indicator Heartbeat / Comm activity Green LED

Energy pulse output / Active alarm indication (congurable) Optical, amber LED

Wavelength 590 to 635 nm

Maximum pulse rate 2.5 kHz

PM5100 PM5300 PM5500

PE86288

Features and Options PM5100 PM5110 PM5310 PM5320 PM5330 PM5340 PM5560 PM5563

Installation

Fast panel mount with integrated display b b b b b b b –

Remote display (optional) – – – – – – – b

Fast installation, DIN rail mountable – – – – – – – b

Accuracy CI 0.5S CI 0.5S CI 0.5S CI 0.5S CI 0.5S CI 0.5S CI 0.2S CI 0.2S

Display

Backlit LCD, multilingual, bar graphs, 6 lines,

4 concurrent values

b b b b b b b –

Power and energy metering

3-phase voltage, current, power, demand,

energy, frequency, power factor

b b b b b b b b

Multi-tariff – – 4 4 4 4 8 8

Power quality analysis

THD, thd, TDD b b b b b b b b

Harmonics, individual (odd) up to 15th 15th 31st 31st 31st 31st 63rd 63rd

I/Os and relays

I/Os 1DO 1DO 2DI/2DO 2DI/2DO 2DI/2DO 2DI/2DO 4DI/2DO 4DI/2DO

Relays 0 0 0 0 2 2 0 0

Alarms and control

Alarms 33 33 35 35 35 35 52 52

Set point response time, seconds 1 1 1 1 1 1 1 1

Single and multicondition alarms – – b b b b b b

Boolean alarm logic – – – – – – b b

Communications

PE86002

Serial ports with modbus protocol – 1 1 –1–1 1

Ethernet port with Modbus TCP protocol – – – 1–12** 2**

Ethernet-to-serial gateway – – – – – – b b

Onboard web server with web pages – – – – – – b b

MID ready compliance,

EN50470-1/3, Annex B and Annex D

Class C

PM5111 PM5331 PM5341 PM5561

** 2 Ethernet ports for daisy chain, one IP address.

PLSED309005EN

Basic multi-function metering PM5000 Series

Dimensions and connection

PM5000 meter parts

A Menu selection buttons

B LED indicators

C Navigation or menu selections

D Maintenance and alarm

notication area

PM5000 Series meter ush mounting*

PM5000 Series meter dimensions

PB111276

PB111279

PM5100 / PM5300 meter parts

E Relay output (PM5300 only)

F Voltage inputs

G Control power

H Current inputs

I Status inputs/digital outputs

J Communications port: Ethernet

(PM5300 only) or RS-485)

PM5100 / PM5300 PM5500

PM5500 meter parts

E Voltage inputs

F RS-485 comms

G Digital inputs

H Current inputs

I Digital outputs

J Ethernet ports

K Control power

PM5500

** PM5563 is DIN mounted

PB111281

PB111282

PB111278

PB111277

Remote display connection

Remote display dimensions

PB111283

PM5000 Series meter parts

PM5000 Series remote display dimensions

PM5100 PM5300 PM5500

PE86288

Features and Options PM5100 PM5110 PM5310 PM5320 PM5330 PM5340 PM5560 PM5563

Installation

Fast panel mount with integrated display b b b b b b b –

Remote display (optional) – – – – – – – b

Fast installation, DIN rail mountable – – – – – – – b

Accuracy CI 0.5S CI 0.5S CI 0.5S CI 0.5S CI 0.5S CI 0.5S CI 0.2S CI 0.2S

Display

Backlit LCD, multilingual, bar graphs, 6 lines,

4 concurrent values

b b b b b b b –

Power and energy metering

3-phase voltage, current, power, demand,

energy, frequency, power factor

b b b b b b b b

Multi-tariff – – 4 4 4 4 8 8

Power quality analysis

THD, thd, TDD b b b b b b b b

Harmonics, individual (odd) up to 15th 15th 31st 31st 31st 31st 63rd 63rd

I/Os and relays

I/Os 1DO 1DO 2DI/2DO 2DI/2DO 2DI/2DO 2DI/2DO 4DI/2DO 4DI/2DO

Relays 0 0 0 0 2 2 0 0

Alarms and control

Alarms 33 33 35 35 35 35 52 52

Set point response time, seconds 1 1 1 1 1 1 1 1

Single and multicondition alarms – – b b b b b b

Boolean alarm logic – – – – – – b b

Communications

PE86002

Serial ports with modbus protocol – 1 1 –1–1 1

Ethernet port with Modbus TCP protocol – – – 1–12** 2**

Ethernet-to-serial gateway – – – – – – b b

Onboard web server with web pages – – – – – – b b

MID ready compliance,

EN50470-1/3, Annex B and Annex D

Class C

PM5111 PM5331 PM5341 PM5561

92 PLSED309005EN

Front view of PowerLogic PM800 series meter with

integrated display.

The PowerLogic PM800 series meters offers many high-performance capabilities

needed to meter and monitor an electrical installation in a compact 96 x 96 mm unit.

All models include an easy-to-read display that presents measurements for all three

phases and neutral at the same time, an RS-485 Modbus communication port, one

digital input, one KY-type digital output, total harmonic distortion (THD) metering,

and alarming on critical conditions. Four models offer an incremental choice of

custom logging and power quality analysis capabilities. Expand any model with

eld-installable option modules that offer a choice of additional digital inputs and

outputs, analogue inputs and outputs, and Ethernet port.

Applications

bPanel instrumentation

bSub-billing, cost allocation and energy management

bRemote monitoring of an electrical installation

bPower quality analysis

bUtility bill verication, utility contract optimization and load preservation.

Characteristics

Easy to install

Mounts using two clips, with no tools required. Direct connect the voltage inputs, with

no need for potential transformers (PTs) up to 600 VAC.

Easy to operate

Intuitive navigation with self-guided, language-selectable menus.

System status at a glance

Large, anti-glare display with back-light provides summary screens with multiple

values. Bar charts graphically represent system loading and I/O.

Custom alarming with time stamping

Over 50 alarm conditions, including over or under conditions, digital input changes,

phase unbalance and more. The models PM850 and PM870 offer boolean logic that

can be used to combine up to four alarms.

Power quality analysis

The PM800 series offers an incremental range of features for troubleshooting and

preventing power quality related problems. All models offer THD metering. The

PM810 with PM810LOG option and PM820 offer individual current and voltage

harmonics readings. The PM850 and PM870 offer waveform capture (PM870 is

congurable) and power quality compliance evaluation to the international EN50160

-ITI(CBEMA)/SEMI F-47 standards. The PM870 offers voltage and current

disturbance (sag/swell) detection.

Extensive on-board memory

All models offer billing (energy and demand), maintenance, alarm and customizable

data logs, all stored in non-volatile memory (PM810 requires PM810LOG option).

ANSI 12.20 Class 0.2S and IEC 62053-22 Class 0.5S accuracy for active energy

Accurate energy measurement for sub-billing and cost allocation.

PMD-S IEC61557-12 performance standard

Meets PMD/SD/K70/0.5 and PMD/SS/K70/0.5 requirements for combined

Performance Measuring and monitoring Devices (PMD).

Trend curves and short-term forecasting

The models PM850 and PM870 offer trend logging and forecasting of energy and

demand readings to help compare load characteristics and manage energy costs.

Expandable I/O capabilities

Use the on-board or optional digital inputs for pulse counting, status/position

monitoring, demand synchronisation or control (gating) of the conditional energy

metering. Use the on-board or optional digital outputs for equipment control or

interfacing, controllable by internal alarms or externally through digital input status.

Use the optional analogue inputs and outputs for equipment monitoring or

interfacing.

Metering of other utilities (WAGES)

All models offer ve channels for demand metering of water, air, gas, electricity or

steam utilities (WAGES) through the pulse counting capabilities of the digital inputs.

Pulses from multiple inputs can be summed through a single channel.

Modular and upgradeable

All models offer easy-to-install option modules (memory, I/O and communications)

and downloadable rmware for enhanced meter capabilities.

Remote display

The optional remote display can be mounted as far as 10 m from the metering unit.

The adapter includes an additional 2- or 4-wire RS-485/RS-232 communication port.

PE86134PB101823-50

Rear view of PowerLogic PM800 series meter.

PowerLogic PM800 series meter

display screen showing bar graphs.

PE86229

PM800 series

Functions and characteristics

Intermediate metering

PLSED309005EN

Part Numbers

Description

Meter without display

Use the base meter unit without display to comply with voltage limitations for local regulations

when door mounting is not possible, or when meter voltage exceeds regulations, or when local

display is not required. When the meter is used without a display, conguration of the

communications port is limited to the default (address 1, 9600 baud, parity even). Requires

software to read data.

PM810 meter unit only, no display,

basic instrumentation, THD, alarming, 80 kB logging

(with PM810LOG)

PM810UMG

PM820 meter unit only, no display,

basic instrumentation, THD, alarming, 80 kB logging

PM820UMG

PM850 meter unit only, no display,

basic instrumentation, THD, alarming, 800 kB

logging, waveform capture

PM850UMG

PM870 meter unit only, no display,

basic instrumentation, THD, alarming, 800 kB

logging, congurable waveform capture and

disturbance detection.

PM870UMG

Meter with integrated display

Use the meter with integrated display for panel mounting when door space is available and when

voltage usage is within the local regulation limits.

PM810 meter with integrated display PM810MG

PM820 meter with integrated display PM820MG

PM850 meter with integrated display PM850MG

PM870 meter with integrated display PM870MG

Meter with remote display

Conveniently packaged kit consist of a base meter (810, 820, 850 or 870) with a remote display,

remote display adapter, and remote display cable 3 m (9.ft 10 inches).

PM810 meter with remote display PM810RDMG

PM820 meter with remote display PM820RDMG

PM850 meter with remote display PM850RDMG

PM870 meter with remote display PM870RDMG

Parts and accessories

Remote display adapter with remote display and

a 3 m (9 ft 10 inch) cable

Use this combination of remote display, adapter, and

3 m cable to equip a base meter unit for use with a

remote display. In addition, the display can be carried

from meter to meter, enabling you to purchase one

display for multiple meters. Each base unit meter

must be equipped with a remote display adapter

(PM8RDA).

PM8RDMG

Remote display adapter alone

When added to the front of the base unit (PM8xxU),

the adapter brings two additional communication

ports: one for the remote display and one 4-wire/2-

wire RS 485/RS 232.

PM8RDA

Part number list continued on next page.

PowerLogic PM800 series meter without display.

PowerLogic PM800 series meter with remote

display.

Remote display adapter with display and cable.

Remote display adaptor alone.

PB101819 -32 PE86135 PB101822 -68 PE86134 PB101814 -36

PowerLogic PM800 series meter with integrated

display.

PM800 series

Functions and characteristics (cont.)

Intermediate metering

94 PLSED309005EN

PowerLogic PM870 with ECC module (bottom view

showing connectors and conguration switches).

ECC module (front

view)

DB119012 DB119011

ECC module (side view

showing LED

indicators).

DB119013

PowerLogic PM800 with PM8M22

and PM8M26 modules.

PB101824 -50

PowerLogic PM8M26 module.

PB1018216 -34

Part Numbers - continued

Description

Optional modules

Ethernet communication module provides a 10/100BaseTx UTP port,

an RS-485 Modbus serial master port, Ethernet-to-serial line gateway

functionality, and an embedded web server that is fully compliant with

Transparent Ready - Level 1 (TRe1) systems.

The PM8ECC supports a private host PM8ECC MIB. Use of this MIB allows

the reading of Basic Metering Data, Conguration and Status of I/Os and

Conguration and Status of Alarms, plus SNMP Trap generation in response

to any PM8 on-board alarms.

PM8ECC

2 relay outputs, 2 digital inputs PM8M22

2 relay outputs, 6 digital inputs PM8M26

2 relay outputs, 2 digital inputs, 2 analogue outputs,

2 analogue inputs

PM8M2222

PM810 optional logging module for on-board data recording, uses a

non-volatile, battery-backed internal clock

PM810LOG

RJ11 Extender kit to mount RJ11 jack in panel door

(for use with PM800, CM3000, and CM4000 series meters)

RJ11EXT

Cable for remote display adapter 1.25 m (4 ft) CAB4

Cable for remote display adapter 3 m (9 ft 10 inch) CAB12

Cable for remote display adapter 9.14 m (30 ft) CAB30

Intermediate metering PM800 series

Functions and characteristics (cont.)

PLSED309005EN

Selection guide PM810 PM820 PM850 PM870

Performance standard

ANSI 12.20 Class 0.2S b b b b

PMD-S IEC 61557-12 PMD/SD/K70/0.5 and PMD/SS/

K70/0.5

b b b b

General

Use on LV and HV systems b b b b

Current and voltage accuracy 0.5 %/0.2% 0.5 %/0.2% 0.5 %/0.2% 0.2 %/0.2%

Active energy accuracy (5% to 200% of load) 0.2 % 0.2 % 0.2% 0.2%

Number of samples per cycle 128 128 128 128

Instantaneous rms values

Current, voltage, frequency b b b b

Active, reactive,apparent power Total & per phase b b b b

Power factor Total & per phase b b b b

Energy values

Active, reactive, apparent energy b b b b

Congurable accumulation mode b b b b

Demand values

Current Present & max. b b b b

Active, reactive, apparent

power

Present & max. b b b b

Predicted active, reactive, apparent power b b b b

Synchronisation of the measurement window b b b b

Demand calculation modeBlock, sliding, thermal b b b b

Other measurements

Hour counter b b b b

Power quality measurements

Harmonic distortion Current & voltage b b b b

Individual harmonics Current & voltage 31 (1) 31 63 63

Waveform capture - - bb (2)

EN50160 - ITI(CBEMA)/SEMI F-47 b (4) b

Sag and swell detection - - - b

Data recording

Min/max of instantaneous values b b b b

Data logs 2 (1) 24 4

Event logs - b b b

Trending / forecasting - - b b

GPS synchronisation b (1) b b b

Alarms b b b b

Time stamping b (1) b b b

Display and I/O

White backlit LCD display b b b b

Multilingual b b b b

Digital input (standard/optional) 1/12 1/12 1/12 1/12

Digital output (standard/optional) 1 KY/4 RY 1 KY/4 RY 1 KY/4 RY 1 KY/4 RY

Analogue inputs (standard/optional) 0/4 0/4 0/4 0/4

Analogue outputs (standard/optional) 0/4 0/4 0/4 0/4

Input metering capability (number of channels) 5 5 5 5

Communication

RS 485 port 2-wire 2-wire 2-wire 2-wire

Modbus protocol b b b b

RS 232/RS 485, 2- or 4-wire Modbus RTU/

ASCII (with addition of PM8RDA module)

b b b b

Ethernet 10/100Base Tx UTP port and RS485

Modbus serial master port with PM8ECC

b b b b

Option modules selection guide

The PM800 can be tted with 2 optional modules, unless otherwise indicated (3)

PM8ECC module

10/100BaseTx UTP port, RS-485 Modbus serial master port, Ethernet to serial line gateway,

embedded web server

Input/Output modules PM8M22 PM8M26* PM8M2222

Relay outputs 2 2 2

Digital inputs 2 6 2

Analogue outputs 4-20 mA 2

Analogue inputs 0-5 Vdc or 4-20 mA 2

* Includes a 24 Vdc Power Supply that can be used to power the digital inputs

(1) With PM810LOG, battery-backed internal clock and 80 kB memory. (2) Congurable. (3) Series 800

Power Meters supports up to two option modules. When PM8M2222 & PM8ECC are mounted together

with control power>370 V AC temperature rating must be reduced to -25°C to 50°C. Same applies when

using two PM8M2222. (4) PM850 does not include sag or swell detection.

PowerLogic PM800 series connectors.

1. Control power.

2. Voltage inputs.

3. Digital input/output.

4. RS 485 port.

5. Option module connector.

6. Current inputs.

7. Mounting clips.

DB109269

PowerLogic PM800 series meter with I/O module.

Intermediate metering PM800 series

Functions and characteristics (cont.)

96 PLSED309005EN

Electrical characteristics

Type of measurement 63rd harmonic, 128 samples per cycle

Measurement accuracy standard PMD-S IEC 61557-12 compliant

Current 0.5% from 0.5 A to 10 A

Voltage 0.2% 10 V - 277 V

Power Factor +/- 0.002 from 0.500 leading to 0.500 lagging

Active Power 0.2%

Frequency +/- 0.01 Hz at 45 to 67 Hz

+/- 0.01 Hz at 350 to 450 Hz

Active Energy IEC 62053-22 Class 0.5S and

ANSI C12.20 Class 0.2S

Reactive Energy IEC 62053-23 Class 2

Data update

rate

1 s

Input-voltage

characteristics

Measured voltage 0 to 600 V AC (direct L-L)

0 to 347 V AC (direct L-N)

up to 3.2 MV AC (with external VT)

Metering over-range 1.5 Un

Impedance 5 MW

Frequency measurement range 45 to 67 Hz and 350 to 450 Hz

Input-current

characteristics

CT ratings Primary Adjustable from 5 A to 32767 A

Secondary 1 A or 5 A

Measurement input range 5 mA to 10 A AC

Permissible overload 15 A continuous

50 A for 10 seconds per hour

500 A for 1 second per hour

Impedance < 0.1 W

Load < 0.15 VA

Control Power AC 115 to 415 ±10 % V AC, 15 VA with options at

45 to 67 Hz or 350 to 450 Hz

DC 125 to 250 ±20 % V DC, 10 W with options

Ride-through time 45 ms at 120 V AC or 125 V DC

Inputs/Outputs (2)

Standard

(meter unit)

1 digital KY pulse output 6 to 220 V AC ± 10% or 3 to 250 V DC ± 10%,

100 mA max. at 25 °C, 1350 V rms isolation

1 digital input 24 to 125 V AC/DC ±10 %, < 5 mA maximum

burden, 1350 Vrms isolation

PM8M22

option

2 relay outputs (1) 6 to 240 V AC or 6 to 30 V DC

2 A rms, 5 A max. for 10 seconds per hour

2 digital inputs 19 to 30 V DC, 5 mA max. at 24 V DC

PM8M26

option

2 relay outputs (1) 6 to 240 V AC, 6 to 30 V DC

2 A rms, 5 A max. for 10 seconds per hour

6 digital inputs 20 to 150 V AC/DC, 2 mA max.

24 V internal supply 20 - 34 V DC, 10 mA max. (feeds 6 digital inputs)

PM8M2222

option

2 relay outputs (1) 6 to 240 V AC, 6 to 30 V DC

2 A rms, 5 A max. for 10 seconds per hour

2 digital inputs 20 to 150 V AC/DC, 2 mA max.

2 analogue outputs 4 to 20 mA dc into 600 ohms maximum

2 analogue inputs Adjustable from 0 to 5 V DC or 4-20 mA

Switching

frequency

(digital I/O)

Standard Input/output 25 Hz, 50 % duty cycle (20 ms ON/OFF)

PM8M22 Input/output 1 Hz, 50 % duty cycle (500 ms ON/OFF)

PM8M26 and

PM8M2222

Input 25 Hz, 50 % duty cycle (20 ms ON/OFF)

Output 1 Hz, 50 % duty cycle (500 ms ON/OFF)

Mechanical characteristics

Weight (meter with integrated display) 0.6 kg

IP degree of protection (IEC 60529) IP52 integrated display. Type 12 compliant

remote display (with gasket). IP30 meter body

Dimensions Without options 96 x 96 x 70 mm (mounting surface)

With 1 option 96 x 96 x 90 mm (mounting surface)

Environmental conditions

Operating

temperature

Meter -25 °C to +70 °C (2)

Display -10 °C to +50 °C

Storage temp. Meter + display -40 °C to +85 °C

Humidity rating 5 to 95 % RH at 40 °C (non-condensing)

Pollution degree 2

Installation category III, for distribution systems up to 347 V L-N /

600 V AC L-L

Dielectric withstand As per EN 61010, UL508

Altitude 3000 m max.

(1) Mechanical endurance: 15 million operations, Electrical endurance:25000

commutations at 2 A / 250 V AC (2) Series 800 Power Meters supports up to two

option modules. When PM82222 & PM8ECC are mounted together with control

Intermediate metering PM800 series

Functions and characteristics (cont.)

PLSED309005EN

Electromagnetic compatibility

Electrostatic discharge Level III (IEC 61000-4-2)

Immunity to radiated elds Level III (IEC 61000-4-3)

Immunity to fast transients Level III (IEC 61000-4-4)

Immunity to impulse waves Level III (IEC 61000-4-5)

Conducted immunity Level III (IEC 61000-4-6)

Immunity to magnetic elds Level III (IEC 61000-4-8)

Immunity to voltage dips Level III (IEC 61000-4-11)

Conducted and radiated

emissions

e industrial environment/FCC part 15 class A EN 55011

Harmonics emissions IEC 61000-3-2

Flicker emissions IEC 61000-3-3

Surge immunity IEC 61000-4-12

Surge withstand capability (SWC) ANSI C37.90.1.2002

Safety

Europe e, as per IEC 61010-1 i (1)

U.S. and Canada cULus (UL508 and CAN/CSA C22.2 No. 14-M95, Industrial

Control Equipment)

Onboard communications

RS 485 port 2-wire, up to 38400 baud, Modbus

Model-dependent characteristics

Data Logs PM810 with PM810LOG, PM820, PM850 and PM870:

- 1 billing log

- 1 customisable log

PM850 and PM870 only: 2 additional custom logs

Min./max. Worst min. and max. with phase indication for Voltages,

Currents, Voltage unbalance, and THD. Min. and max. values

for power factor (True and Displacement), power (P, Q, S) and

frequency

One event log Time stamping to 1 second

Trend curves

(PM850 and PM870 only)

Four trend curves: 1 minute, 1 hour, 1 day and 1 month. Min./

max./avg. values recorded for eight parameters:

- every second for one minute for the 1-minute curve

- every minute for one hour for the 1-hour curve

- every hour for one day for the 1-day curve

- every day for one month for the 1-month curve

Hour counter Load running time in days, hours and minutes

Energy per shift Up to three user-dened intervals per day

Available for all models (the PM810 requires the PM810LOG

module)

Forecasting

(PM850 and PM870 only)

Forecasting of the values for the trended parameters for the

next four hours and next four days

PM850 waveform capture Triggered manually or by alarm, 3-cycle, 128 samples/cycle on

6 user congurable channels

PM870 enhanced waveform

capture

From 185 cycles on 1 channel at 16 samples per cycle up to

3 cycles on 6 channels at 128 samples per cycle

Alarms Adjustable pickup and dropout setpoints and time delays,

numerous activation levels possible for a given type of alarm

Historical and active alarm screens with time stamping

Response time: 1 second

Boolean combination of four alarms is possible using

the operators NAND, AND, OR, NOR and XOR on PM850 and

PM870

Digital alarms: status change of digital inputs

Memory available for logging

and waveform capture (2)

80 kbytes in PM810 with PM810LOG and PM820

800 kbytes in PM850 and PM870

Firmware update (all models) Update via the communication ports

File download available free from www.powerlogic.com

Bar graphs (all models) Graphical representation of system performance

Display characteristics

Languages English, French, Spanish, German, Russian, Turkish and

Portuguese.

Display screen Back-lit white LCD (6 lines total, 4 concurrent values)

Dimensions Display screen viewable area 73 x 69 mm

Integrated display Overall 96 x 96 mm

Depth meter + display 69.4 mm + 17.8 mm

Remote display Overall 96 x 96 x 40 mm

Weight Meter with remote display adapter 0.81 kg

Remote display 0.23 kg

Intermediate metering PM800 series

Functions and characteristics (cont.)

98 PLSED309005EN

Intermediate metering Power Meter Series 800

Dimensions and connection

Power meter with integrated display

Dimensions

DB111765

DB111766

DB111767

Front-panel mounting (meter with integrated display)

DB111768

Spacing between units

DB111769

DB111770

PLSED309005EN

Intermediate metering Power Meter Series 800

Dimensions and connection (cont.)

Remote display door mounting

Flush mounting

DB111792

Surface mount

DB111793

Mounting in a Ø102 cutout (replace analogue device: ammeter, voltmeter, etc.)

DB111794

PLSED309005EN

PowerLogic PM8000 series meter.

The PowerLogic PM8000 series meter is a highly accurate, extremely reliable power

and energy meter with unmatched exibility and usability. The meter combines

accurate 3-phase energy and power measurements with data logging, power quality

analysis, alarming and I/O capabilities not typically available in such a compact

meter.

The PM8000 series meters are compliant with stringent international standards that

guarantee their metering accuracy and power quality measurements. Ideal for

industrial and critical power installations that are responsible for maintaining the

operation and protability of a facility.

Applications and benets

bMaximize prots by providing the highest output possible with the least amount of

risk to availability.

bOptimize availability and reliability of electrical systems and equipment.

bMonitor power quality (PQ) for compliance and to prevent problems.

bMeters fully supported by StruxureWare Power Monitoring Expert and

PowerSCADA Expert Software.

Main characteristics

bPrecision metering:

vIEC 61557-12 PMD Sx K70 3000m 0.2 (performance measuring and monitoring

functions).

vClass 0.2S accuracy IEC 62053-22, ANSI C12.20 Class 0.2 (active energy).

vIndustry leading Class 0.5S* accuracy for reactive energy (IEC 62053-24).

vCycle-by-cycle RMS measurements updated every ½ cycle.

vFull ‘multi-utility’ WAGES metering support.

vNet metering.

vAnti-tamper protection seals.

bPQ compliance reporting and basic PQ analysis.

vMonitors and logs parameters in support of international PQ standards,

- IEC 61000-4-30 Class S

- IEC 62586 PQI-S

- EN 50160

vGenerates onboard PQ compliance reports accessible via onboard web pages:

- Basic event summary and pass/fail reports, such as EN 50160 for power

frequency, supply voltage magnitude, supply voltage dips, short and long inter-

ruptions, temporary over voltages, voltage unbalance and harmonic voltage.

- ITIC (CBEMA) and SEMI curves, with alarm categorization to support further

analyses.

- NEMA Motor Derating curve.

- Basic meter provides EN 50160 but can be congured to provide IEEE 519.

vHarmonic analysis:

- THD on voltage and current, per phase, min/max, custom alarming.

- Individual harmonic magnitudes and angles on voltage and current, up to the

63rd harmonic.

vHigh resolution waveform capture: triggered manually or by alarm, captured

waveforms available directly from the meter via FTP in a COMTRADE format.

vDisturbance detection and capture: sag/swell on any current and voltage channel,

alarm on disturbance event, waveform capture with per-event information.

vPatented disturbance direction detection: provides indication of the captured

disturbance occurring upstream or downstream of the meter; timestamped results

provided in the event log, with degree of certainty of disturbance direction.

bUsed with StruxureWare Power Monitoring Expert software, provides detailed PQ

reporting across entire network:

vEN 50160 report.

vIEC 61000-4-30 report.

vPQ compliance summary.

vISO 50001.

vDisplay of waveforms and PQ data from all connected meters.

bOnboard data and event logging.

v512MB of standard non-volatile memory. 10 MB of standard non-volatile memory

dedicated to capture billing data, events, and waveforms.

PB113688PB113691

PB113692

PM8000 series

Functions and characteristics

Intermediate metering

PowerLogic PM8000 series meter - rear view.

*Certication pending

PowerLogic PM8000 DIN rail mounted meter.

100

PLSED309005EN

PowerLogic remote display.

PowerLogic PM8000 series meter with remote display.

PB113669 PB113671 PB113670

PowerLogic I/O module.

PM8000 series

Functions and characteristics (cont.)

Intermediate metering

vNo data gaps due to network outages or server downtime.

vMin/Max log for standard values.

v50 user-denable data logs, recording up to 16 parameters on a cycle-by-cycle or

other user denable interval.

vContinuous logging or ‘snapshot’ triggered by setpoint and stopped after dened

duration.

vTrend energy, demand and other measured parameters.

vForecasting via web pages: average, minimum and maximum for the next four

hours and next four days.

vTime-of-use in conjunction with StruxureWare software.

vEvent log: alarm conditions, metering conguration changes, and power outages,

timestamped to 1 millisecond.

bAlarming and control.

v50+ denable alarms to log critical event data, trigger waveform recording, or

perform control function.

vTrigger on any condition, with cycle-by-cycle and 1-second response time.

vCombine alarms using Boolean logic and to create alarm levels.

vAlarm notication via email text message.

vIn conjunction with StruxureWare Power Monitoring Expert, software alarms and

alarm frequency are categorized and trended for easy evaluation of worsening/

improving conditions.

bExcellent quality: ISO 9001 and ISO 14000 certied manufacturing.

Usability

bEasy installation and setup.

vPanel and DIN rail mounting options, remote display option.

vPluggable connectors.

vFree setup application simplies meter conguration.

bFront panel.

vEasy to read colour graphic display.

vSimple, intuitive menu navigation with multi-language (8) support.

bFlexible remote communications.

vMultiple simultaneously operating communication ports and protocols allow

interfacing with other automation systems; (e.g. waveforms, alarms, billing data,

etc.) can be uploaded for viewing/analysis while other systems access real-time

information.

vSupports Modbus, ION, DNP3, IEC 61850.

vDual port Ethernet: 10/100base-TX; daisy-chaining capability removes need for

additional switches.

vCreate redundant network loop using Rapid Spanning Tree Protocol (RSTP) and

managed Ethernet switches.

vCustomize TCP/IP port numbers enable/disable individual ports.

vRS-485 2-wire connection, up to 115200 baud, Modbus RTU and ION protocols,

DNP3 is also supported via RS-485.

vEthernet to serial gateway with Modbus Master functionality, connecting to 31

downstream serial Modbus devices. Also supports Modbus Mastering over TCP/

IP (Ethernet) network.

vFull function web server with factory and customizable pages to access real-time

and PQ compliance data.

vPush historical data via email.

vAdvanced security: Up to 16 congurable user accounts.

bTime synchronization via:

vGPS clock (RS485) or IRIG-B (digital input) to +/- 1 millisecond.

vAlso supports Network Time Protocol (NTP/SNTP) and time set function from

StruxureWare software server.

Adaptability

bION™ frameworks allow customizable, scalable applications, object-oriented

programming, compartmentalizes functions, and increases exibility and

adaptability.

101

PLSED309005EN

PB113686

Intermediate metering PM8000 series

Functions and characteristics (cont.)

vApplications include: access and aggregate data from Modbus devices on serial

port or across the network (Modbus TCP/IP), logging and/or processing data by

totalizing, unit conversion or other calculations, applying complex logic for

alarming or control operations, data visualization via web pages.

Standard meter I/O

b3 digital status/counter inputs.

b1 KY (form A) energy pulse output for interfacing with other systems.

Modular I/O options

bOptional expansion modules (up to 4 per meter) add digital/analogue I/O.

Option modules include:

bDigital module

v6 digital status/counter inputs.

v2 Form C relay outputs, 250V, 8A.

bAnalogue module

v4 analogue inputs (4-20mA; 0-30V).

v2 analogue outputs (4-20mA; 0-10V) for interfacing with building management

sensors and systems.

Reference numbers

Meter Description

METSEPM8240 DIN96 panel mount meter

METSEPM8243 DIN rail mount meter

METSEPM8244 DIN rail mount meter with remote display

Accessories Description

METSEPM89RD96 Remote display, 3 metre cable, mounting hardware for

30mm hole (nut & centering pin), mounting hardware

for DIN96 cutout (92x92mm) adapter plate

METSEPM8000SK Terminal covers for utility sealing

METSEPMAK Adapters for mounting meter and remote display back

to back & ANSI 4”, 0.3 metre (1 ft.) Ethernet cable

METSECAB10 Display Cable, 10 metres

METSEPM89M2600 Digital I/O module (6 digital inputs & 2 relay outputs)

METSEPM89M0024 Analogue I/O module (4 analogue inputs & 2 analogue

outputs)

PowerLogic PM8000 series meter with I/O modules.

102

PLSED309005EN

Intermediate metering PM8000 series

Functions and characteristics (cont.)

PB113696

PowerLogic™ PM8000 bottom view DIN mounting.

Features guide PM8000

General

Use on LV and MV systems b

Current accuracy (5A Nominal) 0.1 % reading

Voltage accuracy (57 V LN/100 V LL to 400 V LN/690 V LL) 0.1 % reading

Active energy accuracy 0.2 %

Number of samples/cycle or sample frequency 256

Instantaneous rms values

Current, voltage, frequency b

Active, reactive, apparent power Total and per phase b

Power factor Total and per phase b

Current measurement range (autoranging) 0.05 - 10A

Energy values

Active, reactive, apparent energy b

Settable accumulation modes b

Demand values

Current Present and max. values b

Active, reactive, apparent power Present and max. values b

Predicted active, reactive, apparent power b

Synchronisation of the measurement window b

Setting of calculation mode Block, sliding b

Power quality measurements

Harmonic distortion Current and voltage b

Individual harmonics Via front panel and web page 63

Via StruxureWare software 127

Waveform capture b

Detection of voltage swells and sags b

Fast acquisition 1/2 cycle data b

EN 50160 compliance checking b

Customizable data outputs (using logic and math functions) b

Data recording

Min/max of instantaneous values b

Data logs b

Event logs b

Trending/forecasting b

SER (Sequence of event recording) b

Time stamping b

GPS synchronisation (+/- 1 ms) b

Memory (in Mbytes) 512

Display and I/O

Front panel display b

Wiring self-test b

Pulse output 1

Digital or analogue inputs(max) 27 digital

16 analogue

Digital or analogue outputs (max, including pulse output) 1 digital

8 relay

8 analogue

Communication

RS 485 port 1

Ethernet port 2

Serial port (Modbus, ION, DNP3) b

Ethernet port (Modbus/TCP, ION TCP, DNP3 TCP, IEC 61850 (2))b

Ethernet gateway b

Alarm notication via email b

HTTP web server b

SNMP with custom MIB and traps for alarms b

SMTP email b

NTP time synchronization b

FTP le transfer b

103

PLSED309005EN

Intermediate metering PM8000 series

Functions and characteristics (cont.)

Electrical characteristics PM8000

Type of measurement True rms to 256 samples per cycle

Measurement

accuracy

Current & voltage Class 0.2 as per IEC 61557-12

Active Power Class 0.2 as per IEC 61557-12

Power factor Class 0.5 as per IEC 61557-12

Frequency Class 0.2 as per IEC 61557-12

Active energy Class 0.2S IEC 62053-22 (In=5A)

Class 0.2 IEC 61557-12, ANSI C12.20 Class 0.2

Reactive Energy Class 0.5S IEC 62053-24*

Data update rate 1/2 cycle or 1 second

Input-voltage

characteristics

Specied accuracy

voltage

57 VLN/100 VLL to 400 VLN/690 VLL

Impedance 5 MW per phase

Specied accuracy

frequency

- Frequency

42 to 69Hz

(50/60Hz nominal)

Limit range of

operation

- frequency

20 to 450Hz

Input-current

characteristics

Rated nominal

current

1A (0.5S), 5A (0.2S) , 10A (0.2 ANSI)

Specied accuracy

current range

Starting Current: 5mA

Accurate Range: 50mA - 10A

Permissible

overload

200 A rms for 0.5s, non-recurring

Impedance 0.0003 W per phase

Burden 0.024 VA at 10A

Power supply AC 90-415 V AC ±10% (50/60Hz ± 10%)

DC 120-300 V DC ±10%

Ride-through time 100 ms (6 cycles at 60 Hz) min., any condition

200 ms (12 cycles at 60 Hz) typ., 120 V AC

500 ms (30 cycles at 60 Hz) typ., 415 V AC

Burden Meter Only: 18 VA max at 415V AC, 6W at 300V DC

Fully optioned meter: 36 VA max at 415V AC, 17W at

300V DC.

Input/outputs Meter Base Only 3 form A digital inputs (30V AC/60 V DC)

1 form A (KY) solid state digital output (30V AC/60 V DC,

75mA).

Optional Digital - 6 form A digital inputs (30V AC / 60V DC) wetted +

2 form C relay outputs (250VAC, 8A)

Analogue - 4 analogue inputs (4-20mA, 0-30Vdc) + 2

analogue outputs (4-20mA, 0-10Vdc).

Mechanical characteristics

Weight Integrated Display Model 0.581 kg

DIN rail mounted Model 0.528 kg

IO modules 0.140 kg

Remote display 0.300 kg

IP degree of protection IP 54, UL type 12: Panel mount and Remote display,

front.

IP 30: Panel mount rear, DIN rail mount, I/O modules.

Dimensions Panel mount

model

96 x 96 x 77.5 mm

DIN model 90.5 x 90.5 x 90.8 mm

Remote display 96 x 96 x 27 mm

IO modules 90.5 x 90.5 x 22 mm

Environmental conditions

Operating temperature -25ºC to +70ºC

Remote Display Unit -25ºC to +60ºC

Storage temperature -40ºC to +85ºC

Humidity rating 5% to 95% non-condensing

Installation category III

Operating altitude (maximum) 3000m above sea level

104

PLSED309005EN

Intermediate metering PM8000 series

Functions and characteristics (cont.)

Electromagnetic compatibility

Product standards IEC 62052-11 and IEC 61326-1

Immunity to electrostatic discharge IEC 61000-4-2

Immunity to radiated elds IEC 61000-4-3

Immunity to fast transients IEC 61000-4-4

Immunity to surges IEC 61000-4-5

Immunity to conducted disturbances IEC 61000-4-6

Immunity to power frequency

magnetic elds

IEC 61000-4-8

Immunity to conducted disturbances,

2-150kHz

CLC/TR 50579

Immunity to voltage dips &

interruptions

IEC 61000-4-11

Immunity to ring waves IEC 61000-4-12

Conducted and radiated emissions EN 55022, EN 55011, FCC part 15, ICES-003

Surge withstand Capability (SWC) IEEE C37.90.1

Safety

Safety Construction IEC/EN 61010-1 ed.3, CAT III, 400 VLN / 690 V LL

UL 61010-1 ed.3 and CSA-C22.2 No. 61010-1 ed.3, CAT

III, 347 V LN / 600 V LL

IEC/EN 62052-11, protective class II

Communication (1)

Ethernet to serial line gateway Communicates directly with up to 32 unit load ION slave

devices.

Web server Customisable pages, new page creation capabilities,

HTML/XML compatible.

Serial port RS 485 Baud rates of 2400 to 115200, pluggable screw terminal

connector.

Ethernet port(s) 2x 10/100Base-TX, RJ45 connector (UTP).

Protocol Modbus, ION, DNP3, IEC 61850, HTTP, FTP, SNMP, SMTP,

DPWS, RSTP, NTP, SNTP, GPS protocols.

Firmware characteristics

High-speed data recording Down to 1/2 cycle interval burst recording, stores detailed

characteristics of disturbances or outages. Trigger

recording by a user-dened setpoint, or from external

equipment.

Harmonic distortion Up to 63rd harmonic (127th via StruxureWare software)

for all voltage and current inputs.

Sag/swell detection Analyse severity/potential impact of sags and swells:

magnitude and duration data suitable for plotting on

voltage tolerance curves per phase triggers for waveform

recording, control.

Disturbance direction detection Determine the location of a disturbance more quickly and

accurately by determining the direction of the disturbance

relative to the meter. Analysis results are captured in the

event log, along with a timestamp and condence level

indicating level of certainty.

Instantaneous High accuracy of standard speed (1s) and high-speed

(1/2 cycle) measurements, including true rms per phase

and total for:

voltage, current, active power (kW),reactive power (kvar),

apparent power (kVA), power factor, frequency, voltage

and current unbalance, phase reversal.

Load proling Channel assignments (800 channels via 50 data

recorders) congurable for any measurable parameter,

including historical trend recording of energy, demand,

voltage, current, power quality, or any measured

parameter. Trigger recorders based on time interval,

calendar schedule, alarm/event condition, or manually.

Trend curves Historical trends and future forecasts to better manage

demand, circuit loading, and other parameters. Provides

average, min, max and standard deviation every hour for

last 24 hours, every day for last month, every week for last

8 weeks and every month for last 12 months.

Waveform captures Simultaneous capture of all voltage and current channels

sub-cycle disturbance capture, maximum cycles is

100,000 (16 samples/cycle x 96 cycles, 10MBytes

memory), max 256 samples/cycle.

Alarms Threshold alarms: adjustable pickup and dropout setpoints

and time delays, numerous activation levels possible for a

given type of alarm, user-dened or automatic alarm

threshold settings, user-dened priority levels (optional

automatic alarm setting).

(1) All the communication ports may be used simultaneously.

105

PLSED309005EN

Firmware characteristics (cont.)

Advanced security Up to 16 users with unique access rights. Perform resets,

time sync, or meter congurations based on user

privileges.

Memory 512MB (10MB for programming and interval logging).

Firmware update Update via the communication ports.

Display characteristics

Integrated or Remote display 320x240 (1/4 VGA) Colour LCD, congurable screens , 5

buttons and 2 LED indicators (alarm and meter status).

Languages English, French, Spanish, Russian, Portugese,German,

Italian, Chinese.

Notations IEC, IEEE.

The HMI menu includes

Alarms Active alarms, historic alarms.

Basic Reading Voltage, current, frequency, power summary.

Power Power summary, demand, power factor.

Energy Energy total, delivered, received.

Events Timestamped verbose event log.

Power Quality EN 50160, harmonics, phasor diagrams.

Inputs/Outputs Digital inputs, digital outputs, analogue inputs, analogue

outputs.

Nameplate Model, serial and FW version.

Custom Screens Build your own metrics.

Setup Menu Meter setup, communications setup, display setup, date/

time/clock setup, alarm setup, language setup, time of

use setup, resets, password setup.

Intermediate metering PM8000 series

Functions and characteristics (cont.)

106

107

PLSED309005EN

ION7550 / ION7650

Functions and characteristics

Advanced metering

Used at key distribution points and sensitive loads, PowerLogic™ ION7550 and

ION7650 meters offer unmatched functionality including advanced power quality

analysis coupled with revenue accuracy, multiple communications options, web

compatibility, and control capabilities. Customise metering or analysis functions at

your work station, without hard wiring. Just link drag-and-drop icons or select default

settings. Integrate the meters with StruxureWare Power Monitoring software or share

data with SCADA systems via multiple communication channels and protocols.

Applications

Reduce energy costs.

Increase equipment utilisation.

Comply with environmental and regulatory requirements.

Improve power quality and reliability.

Improve customer satisfaction and retention.

Monitor and control equipment.

Integrated utility metering.

Allocate or sub-bill energy costs to departments, processes or tenants.

Main characteristics

Anticipate, diagnose and verify to increase efciency

Reveal energy inefciencies or waste and optimise equipment operation to increase

efciency. Isolate reliability risks, diagnose power-related equipment issues and

verify reliable operation.

Summarise power quality, set targets, measure and verify results

Consolidate all the power quality characteristics into a single trendable index.

Benchmark power quality and reliability and compare against standards, or compare

facilities or processes.

Easy to use, multilingual, IEC/IEEE congureable display

Bright LCD display with adjustable contrast. Screen-based menu system to congure

meter settings including IEC or IEEE notations. Multilingual support for English,

French, Spanish and Russian. 12/24 hour clock support in multiple formats.

Modbus Master functionality

Read information from downstream Modbus devices and view it via the front panel or

store in memory until you upload to the system level.

IEC 61850 protocol

Increase interoperability and decrease engineering time using standard protocol.

Gateway functionality

Access through the meter’s Ethernet port (EtherGate) or telephone network

(ModemGate) to Modbus communicating devices connected to meter serial ports.

Detect and capture transients as short as 20µs at 50Hz (17µs at 60 Hz)

Identify problems due to short disturbances, e.g. switching of capacitors, etc.

Power quality compliance monitoring

Monitor compliance with international quality-of-supply standards (IEC 61000-4-30

class A ed. 2(1), EN50160(1), IEC 61000-4-7(1), IEC 61000-4-15(1), IEEE 519, IEEE 1159,

and CBEMA/ITIC). Evaluate icker based on IEC 61000-4-15(1) and IEEE 1453(1).

Detect waveshape changes

Detection of phase switching phenomena (for example during the transfer of a high-

speed static switch) not detected by classical threshold-based alarms.

Record ultra-fast electrical parameters every 100 ms or every cycle

Preventive maintenance: acquisition of a motor startup curve, etc.

Trend curves and short-term forecasting

Rapid trending and forecasting of upcoming values for better decision making.

Disturbance direction detection

Determine disturbance location and direction relative to the meter. Results captured

in the event log, along with a timestamp and certainty level.

Alarm setpoint learning

The meter analyses the circuit and recommends alarm setpoints to minimise

nuisance or missed alarms.

Notify alarms via email

High-priority alarms sent directly to the user’s PC. Instant notication of power quality

events by email.(1)

Part numbers

ION7550 / ION7650

ION7550 M7550

ION7650 M7650

Remote display M765RD

Remote display w/power supply M765RDPS

(1) ION7650 only

PowerLogic™ ION7650

108 PLSED309005EN

PE86288

PowerLogic™ ION7550 / ION7650 rear view.

1 Current/voltage inputs

2 Digital inputs

3 Analogue inputs

4 Analogue outputs

5 Communications card

6 Power supply

7 Form C digital outputs

8 Digital inputs

9 Form A digital outputs

Selection guide ION7550 ION7650

General

Use on LV and HV systems b b

Current accuracy (1A to 5A) 0.1 % reading 0.1 % reading

Voltage accuracy (57V to 288V) 0.1 % reading 0.1 % reading

Energy accuracy 0.2 % 0.2 %

Nbr of samples/cycle or sample frequency 256 1024

Instantaneous rms values

Current, voltage, frequency b b

Active, reactive, apparent power Total and per phase b b

Power factor Total and per phase b b

Current measurement range (autoranging) 0.01 - 20A 0.01 - 20A

Energy values

Active, reactive, apparent energy b b

Settable accumulation modes b b

Demand values

Current Present and max. values b b

Active, reactive, apparent power Present and max. values b b

Predicted active, reactive, apparent power b b

Synchronisation of the measurement window b b

Setting of calculation mode Block, sliding b b

Power quality measurements

Harmonic distortion Current and voltage b b

Individual harmonics Via front panel 63 63

Via ION Enterprise 127 511

Waveform capture b b

Detection of voltage swells and sags b b

Detection and capture of transients -20 µs(1)

EN50160 icker -b

Fast acquisition of 100 ms or 20 ms data b b

EN50160 compliance checking -b

Programmable (logic and math functions) b b

Data recording

Min/max of instantaneous values b b

Data logs b b

Event logs b b

Trending/forecasting b b

SER (Sequence of event recording) b b

Time stamping b b

GPS synchronisation (1 ms) b b

Memory (in Mbytes) 10 10

Display and I/O

PE86002

Front panel display b b

Optional colour touchscreen remote display b b

Wiring self-test b b

Pulse output 1 1

Digital or analogue inputs(max) 20 20

Digital or analogue outputs (max, including pulse output) 12 12

Communication

RS 485 port 1 1

RS 485 / RS 232 port 1 1

Optical port 1 1

Modbus protocol b b

IEC 61850 protocol b b

Ethernet port (Modbus/TCP/IP protocol, IEC 61850 (2))1 1

Ethernet gateway (EtherGate) 1 1

Alarms (optional automatic alarm setting b b

Disturbance waveform capture and power quality report Alarm notication via email b b

HTML web page server (WebMeter) b b

Internal modem 1 1

Modem gateway (ModemGate) b b

DNP 3.0 through serial, modem, and I/R ports b b

(1) For 50 Hz line frequency; 17µs for 60 Hz line frequency.

ION7550 / ION7650

Functions and characteristics (cont.)

Advanced metering

234

109

PLSED309005EN

PowerLogic ION7650

Electrical characteristics

PE86126

Type of measurement True rms to 1024 samples per cycle (ION7650)

Measurement

accuracy

Current and voltage ±0.01% of reading + ±0.025% of full scale

Power ±0.075% of reading + ±0.025% of full scale

Frequency ±0.005Hz

Power factor ±0.002 from 0.5 leading to 0.5 lagging

Energy: IEC62053-22 0,2S, 1A and 5A

Data update rate 1/2 cycle or 1 second

Input-voltage

characteristics

Measurement range Autoranging 57V through 347V LN / 600V LL

Impedance 5 MW/phase (phase - Vref)

Frequency measurement

range

42 to 69Hz

Input-current

characteristics

Rated nominal current 1A, 2A, 5A, 10A

Measurement range 0.005 - 20 A autoranging (standard range)

0.001 - 10 A autoranging (optional range)

Permissible overload 500 A rms for 1 s, non-recurring (5A)

50 A rms for 1s, non-recurring (1A)

Impedance 0.002 W per phase (5A)

0.015 W per phase (1A)

Burden 0.05 VA per phase (5 A)

0.015 VA per phase (1 A)

Power supply AC 85-240 V AC ±10% (47-63 Hz)

DC 110-300 V DC ±10%

DC low voltage (optional) 20-60 V DC ±10%

Ride-through time 100 ms (6 cycles at 60 Hz) min.

Burden Standard: typical 20 VA, max 45 VA

Low voltage DC: typical 15 VA, max 20 VA

Power supply for remote display 24 VDC, burden 6.

Input/outputs(1)

(includes Event

Priority)

Standard 8 digital inputs (120 V DC)

3 relay outputs (250 V AC / 30 V DC)

4 digital outputs (solid state)

Optional 8 additional digital inputs

4 analogue outputs, and/or 4 analogue inputs

Mechanical characteristics

Weight 1.9 kg

IP degree of protection (IEC 60529) Integrated display, front: IP 50; back: IP 30

Transducer unit (no display): IP 30; remote

display: IP65

Dimensions Standard model 192 x 192 x 159 mm

TRAN model 235.5 x 216.3 x 133.1 mm

Environmental conditions

Operating

temperature

Standard power supply -20 to +70 ºC

Low voltage DC supply -20 to +50 ºC

Integral display range -20 to +60 ºC

Remote display range 0 to +50 ºC

Storage

temperature

Display, TRAN

Remote display

-40 to +85 ºC

-20 to +60 ºC

Humidity rating 5 - 95% non-condensing, remote display 0 - 85%

Installation category III (2000m above sea level)

Dielectric withstand As per EN 61010-1, IEC 62051-22A(2)

Electromagnetic compatibility

Electrostatic discharge IEC 61000-4-2

Immunity to radiated elds IEC 61000-4-3

Immunity to fast transients IEC 61000-4-4

Immunity to surges IEC 61000-4-5

Conducted and radiated emissions CISPR 22

Safety

Europe IEC 61010-1

Communication

RS 232/485 port (1) Up to 115,200 bauds (57,600 bauds for RS

485), ION, DNP 3.0, Modbus, GPS, EtherGate,

ModemGate, Modbus Master

RS 485 port (1) Up to 57,600 bauds, ION, DNP 3.0, Modbus,

GPS, EtherGate, ModemGate, Modbus Master

Infrared port(1) ANSI type 2, up to 19,200 bauds, ION, Modbus,

DNP 3.0

Ethernet port 10Base-T/100Base-TX, RJ45 connector, 100 m

Fibre-optic Ethernet link

(8 simultaneous connections supported)

100 Base FX, SC duplex connector, 1300 nm,

FO multimode with gradient index 62.5/125 µm

or 50/125 µm, 2000 m link

(1) Consult the ION7550 / ION7650 installation guide for complete specications.

(2) IEC 62051-22B with serial ports only.

ION7550 / ION7650

Functions and characteristics (cont.)

Advanced metering

110 PLSED309005EN

PE86004

Communication (cont.)

Protocol ION, Modbus, TCP/IP, DNP 3.0, Telnet, IEC 61850(2)

EtherGate Communicates directly with up to 62 slave devices via

available serial ports

ModemGate Communicates directly with up to 31 slave devices

Ethernet port 10Base-T/100Base-TX, RJ45 connector, 100 m link

Supported web protocols SNMP, SMTP, FTP

WebMeter 5 customisable pages, new page creation capabilities,

HTML/XML compatible

Firmware characteristics

High-speed data recording Down to 5ms interval burst recording, stores detailed

characteristics of disturbances or outages. Trigger

recording by a user-dened setpoint, or from external

equipment.

Harmonic distortion Up to 63rd harmonic (511th for ION7650 via ION

Enterprise software) for all voltage and current inputs

Sag/swell detection Analyse severity/potential impact of sags and swells:

magnitude and duration data suitable for plotting on

voltage tolerance curves

per phase triggers for waveform recording, control

Disturbance direction detection Determine the location of a disturbance more quickly

and accurately by determining the direction of the

disturbance relative to the meter. Analysis results are

captured in the event log, along with a timestamp and

condence level indicating level of certainty.

Instantaneous High accuracy (1s) or high-speed (1/2 cycle)

measurements, including true rms per phase / total for:

voltage and current

active power (kW) and reactive power (kvar)

apparent power (kVA)

power factor and frequency

voltage and current unbalance

phase reversal

Load proling Channel assignments (800 channels via 50 data

recorders) congurable for any measurable parameter,

including historical trend recording of energy, demand,

voltage, current, power quality, or any measured

parameter. Trigger recorders based on time interval,

calendar schedule, alarm/event condition, or manually.

Trend curves Access historical data at the front panel. Display, trend

and continuously update historical data with date and

timestamps for up to four parameters simultaneously.

Waveform captures Simultaneous capture of all voltage and current channels

sub-cycle disturbance capture

maximum cycles is 214,000 (16 samples/cycle x 96

cycles, 10Mbytes memory)

256 samples/cycle (ION7550)

512 samples/cycle standard, 1024 samples/cycle optional

(ION7650)

COMTRADE waveform format available direct from the

meter (Ethernet port option only)

PE86005

Alarms Threshold alarms:

adjustable pickup and dropout setpoints and time delays,

numerous activation levels possible for a given type of

alarm

user-dened priority levels

boolean combination of alarms is possible using the

operators NAND, OR, NOR and XOR

Advanced security Up to 16 users with unique access rights. Perform resets,

time syncs, or meter congurations on user privileges

Transformer correction Correct for phase / magnitude inaccuracies in current

transformers (CTs), potential transformers (PTs)

Memory 5 to 10 Mbytes (specied at time of order)

Firmware update Update via the communication ports

Display characteristics

Integrated display Back lit LCD, congurable screens

Remote display Colour TFT, congurable screens

Integrated display languages English, French, Spanish, Russian

Remote display languages English, French, Spanish

Example showing instantaneous values and alarm. Notations IEC, IEEE

(1) All the communication ports may be used simultaneously.

(2) Only available with 5MB memory meters.

ION7550 / ION7650

Functions and characteristics (cont.)

Advanced metering

111

PLSED309005EN

ION7550 / ION7650

Functions and characteristics (cont.)

Advanced metering

Part numbers

Example ION7650 product part number.

Item Code Description

PE86020

1 Model Advanced meter with wide-range voltage inputs (57-347V

line-neutral or 100-600V line-line), transient detection, data

and waveform recording, IEC 61000-4-30 Class A & EN50160.

Supports ION, IEC 61850 (only for meters with 5MB memory and

Ethernet comm card) Modbus-RTU, and DNP 3.0.

Advanced meter with wide-range voltage inputs (57-347V

line-neutral or 100-600V line-line), sag/swell detection, data and

waveform recording. Supports ION, IEC 61850 (only for meters

with 5MB memory and Ethernet comm card) Modbus-RTU, and

DNP 3.0.

2Form Factor A0 Integrated display with front optical port, 5 MB logging memory,

and 512 samples/cycle resolution (ION7650) or 256 samples/

cycle (ION7550).

A1 ION7650 only. Integrated display with front optical port, 5 MB

logging memory, and 1024 samples/cycle resolution.

1 Model.

2 Form factor.

3 Current Inputs.

4 Voltage Inputs.

5 Power supply.

6 System frequency.

7 Communications.

8 Inputs/outputs.

9 Security.

10 Special order.

B0 Integrated display with front optical port, 10 MB logging memory,

and 512 samples/cycle resolution (ION7650) or 256 samples/

cycle (ION7550).

B1 ION7650 only. Integrated display with front optical port, 10 MB

logging memory, and 1024 samples/cycle resolution.

T0 Transducer (no display) version, with 5 MB logging memory, and

512 samples/cycle resolution (ION7650) or 256 samples/cycle

(ION7550).

T1 ION7650 only. Transducer (no display) version, with 5 MB

logging memory, and 1024 samples/cycle resolution.

U0 Transducer (no display) version, with 10 MB logging memory,

and 512 samples/cycle resolution (ION7650) or 256 samples/

cycle (ION7550).

U1 ION7650 only. Transducer (no display) version, with 10 MB

logging memory, and 1024 samples/cycle resolution.

3Current Inputs C5 Amp nominal, 20 Amp full scale current input

E1 Amp nominal, 10 Amp full scale current input

FCurrent Probe Inputs (for 0-1 VAC current probes; sold

GCurrent Probe Inputs with three Universal Technic 10A clamp on

CTs; meets IEC 1036 accuracy

4Voltage Inputs 057 to 347 VAC line-to-neutral / 100 to 600 VAC line-to-line

5Power Supply BStandard power supply (85-240 VAC, ±10%/47-63 Hz / 110-300

VDC, ±10%)

CLow voltage DC power supply (20-60 VDC)

6 System

Frequency

5Calibrated for 50 Hz systems

6Calibrated for 60 Hz systems

7 Communications A0 Standard communications (1 RS-232/RS-485 port, 1 RS-485 port).

Integrated display models include 1 ANSI Type 2 optical port.

C1 Standard communications plus 10Base-T/100Base-TX Ethernet

(RJ45), 56k universal internal modem (RJ11). Ethernet and

modem gateway functions each use a serial communications

D7 Standard communications plus 10Base-T/100Base-TX Ethernet

(RJ45) and 100BaseFX Ethernet Fiber, 56k universal internal

modem (RJ11). Ethernet/modem gateway uses serial port.

E0 Standard communications plus 10Base-T/100Base-TX (RJ45).

Ethernet gateway function uses a serial communications port.

F1 Standard communications plus 10Base-T/100Base-TX Ethernet

(RJ45) and 100Base-FX (SC male Fiber Optic connection).

Ethernet gateway function uses a serial port.

M1 Standard communications plus 56k universal internal modem

(RJ11). Modem gateway function uses a serial port.

8 I/O A Standard I/O (8 digital ins, 3 Form C relays, 4 Form A solid-state

EStandard I/O plus Expansion I/O card (8 additional digital inputs &

four 0 to 20 mA analogue inputs)

KStandard I/O plus Expansion I/O card (8 additional digital inputs &

four 0 to 20 mA analogue outputs)

NStandard I/O plus Expansion I/O card (8 additional digital inputs &

four 0 to 20 mA analogue inputs and four 0 to 20 mA outputs)

PStandard I/O plus Expansion I/O card (8 additional digital inputs &

four 0 to 1 analogue inputs and four -1 to 1 mA analogue outputs)

9 Security 0 Password protected, no hardware lock

1Password protected, hardware lockable (enabled/disabled via

jumper on comm card)

6Password protected with security lock enabled, terminal cover and

UK OFGEM labels

112 PLSED309005EN

ION7550 / ION7650

Functions and characteristics (cont.)

Part numbers (cont’d)

Item Code Description

10 Other options A None

CTropicalisation treatment applied

EION7650 only. EN50160 compliance monitoring,

IEC61000-4-30 Class A measureme6nts

FION7650 only. EN50160 compliance monitoring, with

tropicalisation treatment, IEC61000-4-30 Class A

measurements

Communications Card (1)

PE86021

Example order code. Use this group of codes when ordering

the PowerLogic™ ION7550/7650 communications or I/O

cards.

Item Code Description

1 Comm card P765C ION7550 / ION7650 communication card for eld retrot

installations

2 Type A0 Standard communications (1 RS-232/RS-485 port, 1 RS-485

port). Front optical port support for meters with integrated

display.

C1 Standard communications plus 10Base-T/100Base-TX

Ethernet (RJ45), 56k universal internal modem (RJ11; the

modem port is shared with the front optical port). Ethernet and

modem gateway functions each use a serial communications

port. IEC 61850 protocol (depending on rmware version).

1 Communications or I/O card.

2 Type

3 Special order.

D7 Standard communications plus 10Base-T/100Base-TX

Ethernet, 100BaseFX Ethernet Fiber, 56k universal internal

modem (RJ11; the modem port is shared with the front optical

port).

Ethernet and modem gateway functions each use a serial

communications port.IEC 61850 protocol (depending on

rmware version).

E0 Standard communications plus 10Base-T/100Base-

TX Ethernet. Ethernet gateway function uses a serial

communications port. IEC 61850 protocol (depending on

rmware version).

F1 Standard communications plus 10Base-T/100Base-TX

Ethernet, 100BaseFX Ethernet Fiber (SC male Fiber Optic

connection). Ethernet gateway function uses a serial

communications port. IEC 61850 protocol (depending on

rmware version).

M1 Standard communications plus 56k universal internal modem

(RJ11; the modem port is shared with the front optical port).

Modem gateway function uses a serial communications port.

3Special order A None

CTropicalization treatment applied

Input/Output expansion card

Item Code Description

I/O card P760A Expansion I/O for eld retrot installations.

Type D Expansion I/O card with eight digital inputs, four 0 to 1 mA

analogue inputs

EExpansion I/O card with eight digital inputs, four 0 to 20 mA

analogue inputs

HExpansion I/O card with eight digital inputs, four -1 to 1 mA

analogue outputs

KExpansion I/O card with eight digital inputs, four 0 to 20 mA

analogue outputs

NExpansion I/O card with eight digital inputs, four 0 to 20 mA

analogue inputs & four 0 to 20 mA outputs

PExpansion I/O card with eight digital inputs, four 0 to 1 analogue

inputs and four -1 to 1 mA analogue outputs

Special Order A None

PE86019

CTropicalization treatment applied

ION7550 / ION7650 related items

Code Description

ADPT-37XX-7500 Adapter plate to t meter into a 3710 or 3720 ACM panel cutout

TERMCVR-7500 Terminal strip cover for the ION7550 or ION7650

M1UB10A1V-10A 10 A / 1 VAC Universal Technic Clamp On Current Probe

M765RD Colour touchscreen remote display

M765RDPS Remote display kit, includes M765RD, 24 VDC power supply, 4

metre Ethernet cable

P32UEP813-1000A 1000 A / 1 VAC Universal Technic Clamp On Current Probe

P32UEP815-3000A 3000 A / 1 VAC Universal Technic Clamp On Current Probe

SCT0750-005-5A 5 A / 0.333 VAC Magnelabs Split Core Current Probe

SCT1250-300-300A 300 A / 0.333 VAC Magnelabs Split Core Current Probe

(1) Firmware version 350 or higher required.

C 1

Advanced metering

113

PLSED309005EN

ION7550 / ION7650 0

Dimensions and connection

ION7550/ION7650 dimensions

PE86022

PE86023

ION7550 / ION7650 TRAN dimensions

PE86024

PE86025

PE86026

Front-panel mounting

ION7550 and ION7650 meter can have integrated or remote

display. The meter with integrated display is designed to t

DIN standard 192 cutout (186 mm by 186 mm) . The remote

display is intalled through a circular cutout (22.5 mm diameter)

at the panel door. It has a front and a back module, and

communicates with the meter via serial (RS485) or Ethernet.

PE86027

Advanced metering

114 PLSED309005EN

Advanced metering

The PowerLogic Circuit Monitor Series 4000 offers high-performance digital

instrumentation, data acquisition and control capabilities. The products can integrate

easily in power monitoring and control systems due to their optional Ethernet

connections and embedded web server. They are Transparent Ready.

These devices are designed for applications where power quality and availability are

critical factors. They are generally used at service entrances and interconnection

points or on circuits feeding sensitive equipment. Due to their very wide range of

features, including transient detection (CM4000T only), it is possible to rapidly solve

problems related to poor power quality. EN 50160 compliance checking capability

makes these products ideal to meet new needs related to market deregulation.

The Circuit Monitor Series 4000 is available in two versions:

b CM4250, with detection of voltage sags, swells and other power quality indices

b CM4000T, with detection of voltage sags and swells together with transient

detection and icker measurements.

Applications

Panel instrumentation.

Sub-billing / cost allocation.

Remote monitoring of an electrical installation.

Extensive power-quality monitoring.

Contract and load curve optimisation.

EN 50160 electrical supply compliance checking.

Metering of other utilities.

Main characteristics

Disturbance direction detection

Indication of whether the source of a specic power quality event is upstream or

downstream from the meter.

Power quality summary

Consolidation of all the power quality characteristics into a single trendable index.

Adaptive waveform capture

Capture of long-duration events.

Shift energy summary

Indication of energy usage per shift up to three shifts a day.

Detection and capture of voltage sags and swells

Fast identication of problems causing production shutdown.

Detection and capture of short transients less than 1 µs

(optional, CM4000T only)

Identication of problems due to short disturbances, e.g. switching of capacitors, etc.

Flicker evaluation based on IEC 61000-4-15 and IEEE 1453 (CM4000T only)

Measurement of rapid voltage variations.

Electrical quality checking in compliance with EN 50160

Fast standardised check on the quality of the electricity supplied.

Detection of major waveform changes

Detection of phase switching phenomena (for example during the transfer of a high-

speed static switch) not detected by classical threshold-based alarms.

Ultra-fast recording of electrical parameters every 100 ms or every cycle

Preventive maintenance: acquisition of a motor startup curve, etc.

Trend curves and short-term forecasting

Rapid trending and forecasting of upcoming values for better decision making.

Automatic alarm setting

Alarm setpoint learning feature for optimum threshold settings.

Up to 32 Mbytes of memory (16 Mbytes standard)

For archiving of data and waveforms.

Ethernet 10/100 Mbits/s card and server for HTML pages

(with optional Ethernet card)

Rapid data transfers over an intranet or the internet, simply using a web browser.

Alarm notication via email

High-priority alarms sent directly to the user’s PC.

Instant notication of power quality events by email.

Up to 25 inputs/outputs to monitor the electrical installation

(with optional I/O cards)

Status of circuit breakers, as well as metering of other commodities, e.g. gas, water, etc.

IEC 62053-22 and ANSI C12.20 Class 0.2S for energy

Verication of consumption and load curves.

PE86140

CM4000 + vacuum uorescent display (VFD).

Circuit Monitor Series 4000

Functions and characteristics

115

PLSED309005EN

Advanced metering

Part numbers

Circuit Monitor Series 4000

Circuit Monitor CM4250 CM4250

Circuit Monitor CM4000T CM4000T

DB108168

CM4000 series.

1 Current/voltage module.

2 Control power-supply connector.

3 Maintenance LED indicator.

4 Power LED indicator.

5 RS 485 port with transmit and receive LED indicators.

6 Display communication port.

7 Slots for optional cards.

8 RS 232 port with transmit and receive LED indicators.

9 KYZ pulse output.

10 Sealable access door.

Selection guide CM4250

General

Use on LV and HV systems b b

Current and voltage accuracy 0.07 % 0.07 %

Energy and power accuracy 0.2 % 0.2 %

Nbr of samples/cycle or sample frequency 512 5 MHz

Instantaneous rms values

Current, voltage, frequency b b

Active, reactive, apparent power Total and per phase b b

Power factor Total and per phase b b

Energy values

Active, reactive, apparent energy b b

Settable accumulation modes b b

Demand values

Current Present and max. values b b

Active, reactive, apparent power Present and max. values b b

Predicted active, reactive, apparent power b b

Synchronisation of the measurement window b b

Setting of calculation mode Block, sliding b b

Power quality measurements

Interharmonics b-

Harmonic distortion Current and voltage b b

Individual harmonics Via monitor 63 63

Via SMS 255 255

Waveform capture b b

Detection of voltage swells and sags b b

Adaptive waveform capture (up to 64 s) b b

Detection and capture of transients (< 1 µs) -b

Flicker - b

Fast acquisition of 100 ms or cycle by cycle data b b

EN 50160 compliance checking (1) b b

Programmable (logic and math functions) b b

Data recording

E87306

Min/max of instantaneous values b b

Data logs b b

Event logs b b

Trending/forecasting b b

Alarms (optional automatic alarm setting) b b

Alarm notication via email ECC21 option

SER (Sequence of Event Recording) b b

Time stamping b b

GPS synchronisation (1 ms) IOC44 option

Memory expandable up to 32 Mbytes 32 Mbytes

Display and I/O

Display CMDLC or CMDVF option

Multilingual: English, French, Spanish, German, Italian, Polish b b

Wiring self-test b b

Pulse output b b

Disturbance waveform capture: detection of a voltage sag. Maximum number of I/Os 25 25

Input metering capability (number of channels) 10 10

Direct voltage connection 690 V 600 V

Communication

RS 485 port 2/4 wires 2/4 wires

RS 232 port b b

Modbus protocol b b

Ethernet card (Modbus/TCP/IP protocol) ECC21 option

HTML-page web server ECC21 option

Ethernet gateway for third-party products ECC21 option

(1) Except for interharmonics, signalling voltages, icker and transients.

Circuit Monitor Series 40000

Functions and characteristics (cont.)

116 PLSED309005EN

Advanced metering

The Circuit Monitor has two optional display units, an LCD display and a vacuum

uorescent display (VFD). They may be used for local circuit-monitor setup and

operation.

PE86143

CMDLC display

Back-lit LCD display with four lines and 20 characters per line. The display unit has

four navigation buttons, a contrast button and a red alarm LED.

It connects to the Circuit Monitor via a CAB12 cable, 4.2 metres long, supplied with

the display.

Part numbers

LCD display supplied with the CAB12 cable CMDLC

Connection cables:

Circuit Monitor <-> display

1.25 m (4 ft) CAB4

3.65 m (12 ft) CAB12

9.14 m (30 ft) CAB30

PE86142

CMDVF display

Vacuum uorescent display (VFD) with four lines and 20 characters per line.

The display unit has four navigation buttons, a contrast button, a red alarm LED.

The display comes with a cable for connection to the Circuit Monitor (CAB12 cable,

4.2 m long).

Part numbers

VFD supplied with the CAB12 cable CMDVF

Connection cables:

Circuit Monitor <-> display

1.25 m (4 ft) CAB4

3.65 m (12 ft) CAB12

9.14 m (30 ft) CAB30

E87288

1 Display screen.

2 Alarm LED.

3 Arrow buttons.

4 Menu button.

5 Proximity sensor (VFD display only).

6 Enter button.

7 Contrast button.

Display.

Circuit Monitor Series 4000 0

Functions and characteristics (cont.)

117

PLSED309005EN

Advanced metering

PE86141

CM4000 + options: ECC21, IOC44 and IOX2411.

Electrical characteristics

Type of measurement True rms up to the 255th harmonic

On three-phase AC system (3P, 3P + N)

Up to 512 samples per cycle

Up to 5 MHz for transient events (CM4000T

only)

Measurement

accuracy

Current and voltage ±0.04 % of reading + ±0.025 % of full scale

Power ±0.075 % of reading + ±0.025 % of full scale

Frequency ±0.01 Hz from 45 to 67 Hz

±0.1 Hz from 350 to 450 Hz

Power factor ±0.002 from 0.5 leading to 0.5 lagging

Energy:

CM4250/CM4000T

IEC 62053-22 and ANSI C12.20 Class 0.2S

Data update rate 1 s in normal mode

Input-voltage

characteristics

Measured voltage 0 to 600 V AC on CM4000T (direct)

0 to 690 V AC on CM4250 (direct)

0 to 1200 kV AC (with external VT)

Measurement range 0 to 1.5 Un

Impedance > 2 MW

Frequency measurement

range

45 to 67 Hz and 350 to 450 Hz

Input-current

characteristics

CT ratings Adjustable from 5 A to 30 000 A

Measurement range

CM4250/CM4000T

5 mA to 10 A

Permissible overload 15 A continuous

50 A for 10 seconds per hour

500 A for 1 second per hour

Impedance < 0.1 W

Load < 0.15 VA

Power supply AC 100 to 275 V AC (±10 %), 50 VA

DC 125 to 250 V DC (±20 %), 30 W

Ride-through time 100 ms at 120 V DC

Input/outputs Pulse output Static output (240 V AC max, 96 mA max)

IOC44 card (optional) 4 digital inputs (20-138 V AC/DC),

3 relay outputs (5 A to 240 V AC)

1 static output (96 mA max to 240 V AC)

IOX extender (optional) Slots for 8 I/Os

IOX08 (optional) 8 digital inputs 120 V AC

IOX0404 (optional) (1) 4 dig. inputs 120 V AC, 4 analogue outputs

4-20 mA

IOX2411 (optional) (1) 2 dig. outputs 120 V AC, 4 dig. inputs 32 V DC,

1 analogue input 0-5 V, 1 analogue output 4-20

Mechanical characteristics

Weight 1.9 kg

IP degree of protection (IEC 60529) IP52

Dimensions

CM4250/

CM4000T

Without IOX accessory 235.5 x 165.6 x 133.1 mm

With IOX accessory 235.5 x 216.3 x 133.1 mm

Environmental conditions

Operating

temperature

Circuit Monitor -25 °C to +70 °C

CMDLC display -20 °C to +60 °C

CMDVF display -20 °C to +70 °C

Storage

temperature

CM + displays -40 °C to +85 °C

Humidity rating 5 to 95 % RH at 40 °C

Pollution degree 2

Installation

1000513386 Catalog

Navigation menu

Versions of this User Manual:

Views

Navigation