100572 Catalog
2014-07-29
: Pdf 100572-Catalog 100572-Catalog 702316 Batch6 unilog
Open the PDF directly: View PDF 
.
Page Count: 44
| Download | |
| Open PDF In Browser | View PDF |
CATALOG List Price Book ELECTRICAL & MECHANICAL SUPPORT SYSTEMS Metal Framing • Pipe Supports • Fittings, Nuts & Hardware A PART OF SECTION DESCRIPTION..................................................................................................................................................................................PAGE 1 Channel.............................................................................................................................................................................................4 – 10 2 Fittings and Accessories................................................................................................................................................................11 – 39 3 Pipe Hangers ••New Product**........................................................................................................................................................40–41 – Material and Finish Specifications.................................................................................................................................................42 – Ordering Information.......................................................................................................................................................................42 – Terms and Conditions.....................................................................................................................................................................43 Product Codes Code Product Category A CHANNELS B PIPE CLAMPS C CHANNEL NUTS D GENERAL FITTINGS & HARDWARE F CONCRETE INSERTS G CUSHIONED CLAMPS H SLOTTED ANGLE Warning: Power-Strut products are carefully designed and manufactured to the listed standards, as applicable. However, Power-Strut reserves the right to revise product design without notification. Power-Strut products included in this catalog are intended for installation and service only as described or specified herein. Care should be exercised by installers and end-users to install, use and maintain these products properly to avoid an possible on-the-job accidents. Prices subject to change upon notice. Note: P.O.A. = Priced on Availability ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 ft. PS 100 ---- www.power-strut.com --- Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 ft. PS 100 2T3 1 5/8" x 3 1/4" x 12 Ga. Channel PS 100 10 GR 300 PS 100 10 HG 300 PS 100 10 PG 300 PS 100 10 PL 300 PS 100 20 GR 400 PS 100 20 HG 400 PS 100 20 PG 400 PS 100 20 PL 400 PS 100 20 ZD 400 307 315 315 307 307 315 315 307 307 $1,286.79 $2,442.25 $1,384.92 $1,170.93 $1,311.65 $2,548.44 $1,384.92 $1,221.85 $1,445.08 Two PCS PS 100 Welded Back To Back 1 5/8" x 6 1/2" x 12 Ga. PS 100 2T3 10 GR 150 614 $3,630.22 PS 100 2T3 10 HG 150 630 $4,420.36 PS 100 2T3 10 PG 150 630 $3,655.15 PS 100 2T3 20 GR 200 614 $3,630.22 PS 100 2T3 20 HG 200 630 $4,773.99 PS 100 2T3 20 PG 200 630 $3,655.15 PS 100 2T3 20 PL 200 614 $3,280.54 PS 100 2T3 20 ZD 200 614 $3,947.61 PS 100 EH 1 5/8" x 3 1/4" x 12 Ga. Channel With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 100 2T3 Two PCS PS 100 Welded Back To Back With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 100 EH 10 PS 100 EH 10 PS 100 EH 10 PS 100 EH 10 PS 100 EH 10 PS 100 EH 20 PS 100 EH 20 PS 100 EH 20 PS 100 EH 20 PS 100 EH 20 GR HG PG PL ZD GR HG PG PL ZD 300 300 300 300 300 400 400 400 400 400 298 310 306 298 315 298 310 300 298 311 $1,513.89 $2,832.82 $1,606.26 $1,506.70 $1,606.21 $1,513.89 $2,832.82 $1,606.26 $1,572.21 $1,676.04 307 315 307 315 307 $1,909.24 $2,040.21 $1,909.24 $1,955.20 $1,725.90 PS 100 KO6 1 5/8" x 3 1/4" x 12 Ga. Channel With 7/8" Knock Out On 6" Centers PS 100 K06 10 PS 100 K06 10 PS 100 K06 20 PS 100 K06 20 PS 100 K06 20 GR PG GR PG PL 300 300 400 400 400 PS 100 H GR HG PG PL GR HG PG PL 300 300 300 300 400 600 400 400 302 310 310 302 302 310 310 302 $1,940.21 $2,955.99 $1,987.84 $1,740.73 $1,940.21 $2,955.99 $1,987.84 $1,740.73 PS 150 1 5/8" x 2 7/16" x 12 Ga. Channel PS 150 10 GR 400 PS 150 10 HG 400 PS 150 10 PG 400 PS 150 10 PL 400 PS 150 10 ZD 400 PS 150 20 GR 400 PS 150 20 HG 400 PS 150 20 PG 400 PS 150 20 PL 400 PS 150 20 ZD 400 249 254 254 249 254 249 254 254 249 249 $1,035.94 $1,305.55 $1,233.25 $939.23 $1,286.87 $1,035.94 $1,362.31 $1,233.25 $939.23 $1,286.87 240 245 245 245 240 245 245 240 245 $1,229.52 $1,443.08 $1,317.12 $1,374.39 $1,229.52 $1,382.95 $1,317.12 $1,183.95 $1,374.39 249 254 254 249 249 254 254 $1,546.05 $1,465.80 $1,648.63 $1,404.84 $1,546.05 $1,465.80 $1,648.63 PS 150 EH PS 150 EH 10 PS 150 EH 10 PS 150 EH 10 PS 150 EH 10 PS 150 EH 20 PS 150 EH 20 PS 150 EH 20 PS 150 EH 20 PS 150 EH 20 GR HG PG ZD GR HG PG PL ZD 400 400 400 400 400 400 400 400 400 PS 150 K06 PS 100 S 1 5/8" x 2 7/16" x 12 Ga. Channel With 7/8" Knock Outs On 6" Centers 1 5/8" x 3 1/4" x 12 Ga. Channel With 13/32" x 3" Slots On 4" Centers PS 100 S 10 PS 100 S 10 PS 100 S 10 PS 100 S 10 PS 100 S 20 PS 100 S 20 PS 100 S 20 PS 100 S 20 $4,189.34 $4,271.94 $3,614.59 1 5/8" x 2 7/16" x 12 Ga. Channel With 1 1/8" x 9/16" Elongated Holes On 2" Centers 1 5/8" x 3 1/4" x 12 Ga. Channel With 9/16" Holes On 1 7/8" Centers PS 100 H 10 PS 100 H 10 PS 100 H 10 PS 100 H 10 PS 100 H 20 PS 100 H 20 PS 100 H 20 PS 100 H 20 PS 100 EH 2T3 20 GR 200 600 PS 100 EH 2T3 20 PG 200 600 PS 100 EH 2T3 20 PL 200 600 GR HG PG PL GR HG PG PL 300 300 300 300 400 400 400 400 296 301 304 296 296 301 304 296 $1,887.93 $2,955.99 $1,990.47 $1,752.98 $1,941.87 $2,955.99 $1,990.47 $1,752.98 PS 150 K06 10 PS 150 K06 10 PS 150 K06 10 PS 150 K06 10 PS 150 K06 20 PS 150 K06 20 PS 150 K06 20 GR HG PG PL GR HG PG 400 400 400 400 400 400 400 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 3 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 ft. PS 150 H GR HG PG PL GR HG PG PL 400 400 400 400 400 400 400 400 244 249 249 244 244 242 249 244 $1,555.95 $1,443.08 $1,581.85 $1,412.85 $1,555.95 $1,443.08 $1,650.63 $1,412.85 1 5/8" x 2 7/16" x 12 Ga. Channel With 13/32" x 3" Slots On 4" Centers Std Qty Wt./ 100 List Price per 100 ft. GR HG PG GR HG PG PL 400 400 400 400 400 400 400 238 243 243 238 243 243 238 $1,500.89 $1,432.09 $1,581.85 $1,566.14 $1,432.09 $1,650.63 $1,400.03 Two PCS.PS 150 Welded Back To Back 1 5/8" x 4 7/8" x 12 Ga. PS 150 2T3 10 GR 200 498 $2,667.16 PS 150 2T3 10 HG 200 508 $3,022.27 PS 150 2T3 10 PG 200 508 $2,748.89 PS 150 2T3 10 PL 200 498 $2,617.70 PS 150 2T3 20 GR 200 498 $2,508.63 PS 150 2T3 20 HG 200 508 $3,022.27 PS 150 2T3 20 PG 200 508 $2,655.94 PS 150 2T3 20 PL 200 498 $2,420.79 PS 150 2T3 20 ZD 200 498 $2,868.41 PS 150 2T3 Two PCS.PS 150 Welded Back To Back With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 150 EH 2T3 20 GR 200 490 $3,614.08 PS 150 EH 2T3 20 PG 200 490 $3,556.85 PS 150 EH 2T3 20 ZD 200 490 $3,711.50 PS 200 1 5/8" x 1 5/8" x 12 Ga. Channel PS 200 10 GR 500 PS 200 10 HG 500 PS 200 10 PG 500 PS 200 10 PL 500 PS 200 10 ZD 500 PS 200 20 GR 500 PS 200 20 HG 500 PS 200 20 PG 500 PS 200 20 PL 500 PS 200 20 ZD 500 PS 200 EH 10 PS 200 EH 10 PS 200 EH 10 PS 200 EH 10 PS 200 EH 10 PS 200 EH 20 PS 200 EH 20 PS 200 EH 20 PS 200 EH 20 PS 200 EH 20 GR HG PG PL ZD GR HG PG PL ZD 500 500 500 500 500 500 500 500 500 500 182 $740.73 185 $1,011.85 185 $755.20 182 $758.99 182 $765.72 182 $755.54 185 $1,032.81 185 $755.20 182 $758.99 182 $781.57 PS 200 KO6 PS 150 2T3 4 Part No. & Length Fin. 1 5/8" x 1 5/8" x 12 Ga. Channel; With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 150 S PS 150 S 10 PS 150 S 10 PS 150 S 10 PS 150 S 20 PS 150 S 20 PS 150 S 20 PS 150 S 20 PS 200 EH 1 5/8" x 2 7/16" x 12 Ga. Channel With 9/16" Holes On 1 7/8" Centers PS 150 H 10 PS 150 H 10 PS 150 H 10 PS 150 H 10 PS 150 H 20 PS 150 H 20 PS 150 H 20 PS 150 H 20 ---- www.power-strut.com ---- 191 $697.68 194 $1,049.05 194 $679.57 191 $648.56 190 $703.30 191 $697.68 194 $1,059.80 194 $679.57 191 $648.56 190 $703.30 1 5/8" x 1 5/8" x 12 Ga. Channel; With 7/8" Knock Outs On 6" Centers PS 200 K06 10 PS 200 K06 10 PS 200 K06 10 PS 200 K06 20 PS 200 K06 20 PS 200 K06 20 GR PG PL GR PG PL 500 500 500 500 500 500 191 194 191 191 187 191 $801.76 $845.66 $790.89 $801.76 $845.66 $790.89 PS 200 H 1 5/8" x 1 5/8" x 12 Ga. Channel With 9/16" Holes On 1 7/8" Centers PS 200 H 10 PS 200 H 10 PS 200 H 10 PS 200 H 10 PS 200 H 10 PS 200 H 20 PS 200 H 20 PS 200 H 20 PS 200 H 20 GR HG PG PL ZD GR HG PG PL 500 500 500 500 500 500 500 500 500 186 $803.81 189 $792.33 189 $788.09 186 $790.89 186 $796.17 186 $803.81 189 $1,046.30 189 $796.17 186 $790.89 PS 200 H3 1 5/8" x 1 5/8" x 12 Ga. Channel With 9/16" Holes On 1 7/8" Centers PS 200 H3 10 PS 200 H3 10 PS 200 H3 10 PS 200 H3 10 PS 200 H3 20 PS 200 H3 20 PS 200 H3 20 PS 200 H3 20 GR HG PG PL GR HG PG PL 500 500 500 500 500 1000 500 500 174 174 175 174 174 174 175 174 $1,140.51 $1,238.33 $1,143.72 $1,049.09 $1,140.51 $1,578.53 $1,149.17 $1,049.09 PS 200 S 1 5/8" x 1 5/8" x 12 Ga. Channel With 13/32" x 3" Slots On 4" Centers PS 200 S 10 PS 200 S 10 PS 200 S 10 PS 200 S 10 PS 200 S 10 PS 200 S 20 PS 200 S 20 PS 200 S 20 PS 200 S 20 PS 200 S 20 GR HG PG PL ZD GR HG PG PL ZD 500 500 500 500 500 500 500 500 500 500 180 $774.61 183 $1,032.81 183 $794.84 180 $794.55 180 $806.53 180 $785.83 183 $1,032.81 183 $818.22 180 $794.55 180 $841.60 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 ft. PS 200 2T3 ---- www.power-strut.com --- Part No. & Length Fin. Std Qty List Price per 100 ft. 135 143 143 135 135 135 143 143 135 $680.04 $837.81 $667.54 $668.63 $700.86 $680.04 $861.75 $704.25 $700.86 141 149 141 141 149 141 $883.90 $905.14 $874.23 $883.90 $905.14 $874.23 138 146 137 138 141 138 146 137 138 $889.05 $954.99 $873.67 $800.56 $894.32 $889.05 $954.99 $894.38 $800.56 133 141 133 133 133 141 133 133 $746.24 $829.28 $757.34 $848.93 $746.24 $829.28 $757.34 $848.93 282 298 298 282 282 286 286 282 $1,693.98 $1,918.57 $1,663.67 $1,552.06 $1,767.63 $1,918.57 $1,721.90 $1,552.06 PS 210 EH Two PCS. PS 200 Welded Back To Back 1 5/8" x 3 1/4" x 12 Ga. PS 200 2T3 10 HG 250 388 $2,202.95 PS 200 2T3 10 PG 250 388 $1,508.97 PS 200 2T3 10 PL 250 382 $1,401.93 PS 200 2T3 10 ZD 250 382 $1,488.13 PS 200 2T3 20 GR 300 382 $1,508.29 PS 200 2T3 20 HG 300 388 $2,202.95 PS 200 2T3 20 PG 300 388 $1,508.97 PS 200 2T3 20 PL 300 382 $1,401.93 PS 200 2T3 20 ZD 300 382 $1,488.13 1 5/8" x 1 5/8" x 14 Ga. Channel With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 200 2T3 Two PCS. PS 200 Welded Back To Back With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 200 EH 2T3 10 GR 250 370 $2,975.83 PS 200 EH 2T3 10 HG 250 370 $3,033.14 PS 200 EH 2T3 10 ZD 250 370 $3,063.60 PS 200 EH 2T3 20 HG 300 364 $3,033.14 PS 200 EH 2T3 20 PG 300 364 $3,001.44 PS 200 EH 2T3 20 ZD 300 364 $3,063.60 PS 210 KO6 PS 210 EH 10 PS 210 EH 10 PS 210 EH 10 PS 210 EH 10 PS 210 EH 10 PS 210 EH 20 PS 210 EH 20 PS 210 EH 20 PS 210 EH 20 GR HG PG PL ZD GR HG PG ZD 500 500 500 500 500 500 500 500 500 1 5/8" x1 5/8" x 14 Ga. Channel With 7/8" Knock Outs On 6" Centers PS 210 K06 10 PS 210 K06 10 PS 210 K06 10 PS 210 K06 20 PS 210 K06 20 PS 210 K06 20 GR PG PL GR PG PL 500 500 500 500 500 500 PS 210 H PS 200 2T4 Two PCS. PS 200 Welded Side To Back 1 5/8" x 3 1/4" x 12 Ga. PS 200 2T4 10 GR 250 382 $2,411.64 PS 200 2T4 10 HG 250 388 $2,912.03 PS 200 2T4 10 PG 250 388 $2,712.58 PS 200 2T4 10 PL 250 382 $1,442.12 PS 200 2T4 20 GR 300 382 $2,987.43 PS 200 2T4 20 HG 300 388 $3,144.99 PS 200 2T4 20 PG 300 388 $2,712.58 PS 200 2T4 20 PL 300 382 $2,137.46 PS 200 2T5 Welded Channel Two PCS. PS 200 Welded Side To Side 1 5/8" x 3 1/4" x 12 Ga. PS 200 2T5 10 PS 200 2T5 10 PS 200 2T5 10 PS 200 2T5 20 PS 200 2T5 20 PS 200 2T5 20 PS 200 2T5 20 Wt./ 100 GR HG PG GR HG PG PL 250 250 160 300 300 300 300 382 378 388 382 388 388 382 $2,311.15 $3,144.99 $2,712.58 $2,987.43 $2,912.03 $2,830.52 $2,137.46 PS 210 1 5/8" x 1 5/8" x 14 Ga. Channel PS 210 10 GR 500 PS 210 10 HG 500 PS 210 10 PG 500 PS 210 10 PL 500 PS 210 10 ZD 500 PS 210 20 GR 500 PS 210 20 HG 500 PS 210 20 PG 500 PS 210 20 PL 500 PS 210 20 ZD 500 Steel Channel With Holes 9/16" Holes On 1 7/8" Centers 1 5/8" x 1 5/8" x 14 Ga. PS 210 H 10 GR 500 PS 210 H 10 HG 500 PS 210 H 10 PG 500 PS 210 H 10 PL 500 PS 210 H 10 ZD 500 PS 210 H 20 GR 500 PS 210 H 20 HG 500 PS 210 H 20 PG 500 PS 210 H 20 PL 500 PS 210 S 1 5/8" x 1 5/8" x 14 Ga. Channel With 13/32" x 3" Slots On 4" Centers PS 210 S 10 PS 210 S 10 PS 210 S 10 PS 210 S 10 PS 210 S 20 PS 210 S 20 PS 210 S 20 PS 210 S 20 GR PG PL ZD GR PG PL ZD 500 500 500 500 500 500 500 500 PS 210 2T3 141 142 142 141 141 141 149 142 141 141 $599.91 $871.31 $621.38 $561.75 $636.05 $599.91 $871.31 $621.38 $561.75 $636.05 Welded Channel Two PCS. PS 210 Welded Back To Back 1 5/8" x 3 1/4" x 14 Ga. PS 210 2T3 10 PS 210 2T3 10 PS 210 2T3 10 PS 210 2T3 10 PS 210 2T3 20 PS 210 2T3 20 PS 210 2T3 20 PS 210 2T3 20 GR HG PG PL GR HG PG PL 250 250 250 250 300 300 300 300 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 5 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 ft. PS 210 2T3 PS 300 1 5/8" x 1 3/8" x 12 Ga. Channel PS 300 10 GR 500 PS 300 10 HG 500 PS 300 10 PG 500 PS 300 10 PL 500 PS 300 20 HG 500 PS 300 20 PG 500 PS 300 20 PL 500 173 176 176 173 176 176 173 $747.38 $960.83 $781.86 $691.75 $960.83 $781.86 $675.73 PS 300 EH 1 5/8" x 1 3/8" x 12 Ga. Channel With 1 1/8" x 9/16" Elongated Holes On 2" Centers GR HG PG PL ZD GR HG PG PL ZD 500 500 500 500 500 500 500 500 500 500 164 $938.43 167 $1,196.20 167 $957.71 164 $954.93 167 $953.17 164 $938.43 167 $1,196.20 167 $957.71 164 $954.93 167 $980.41 PS 300 KO6 1 5/8" x 1 3/8" x 12 Ga. Channel With 7/8" Knock Outs On 6" Centers PS 300 K06 10 PS 300 K06 10 PS 300 K06 10 PS 300 K06 20 PS 300 K06 20 PS 300 K06 20 GR PG PL GR PG PL 500 500 500 500 500 500 173 176 173 173 176 173 $1,079.55 $1,091.80 $969.82 $1,079.55 $1,091.80 $969.82 PS 300H 1 5/8" x 1 3/8" x 12 Ga. Channel; With 9/16" Holes On 1 7/8" Centers PS 300 H 10 GR 500 168 $1,031.52 PS 300 H 10 HG 500 171 $1,335.92 PS 300 H 10 PG 500 171 $1,095.12 PS 300 H 10 PL 500 168 $982.07 PS 300 H 20 GR 500 168 $1,031.52 PS 300 H 20 PG 500 171 $1,095.12 PS 300 H 20 PL 500 168 $982.07 PS 300 S 1 5/8" x 1 3/8" x 12 Ga. Channel; With 13/32" x 3" Slots On 4" Centers PS 300 S 10 GR 500 162 $1,079.55 PS 300 S 10 PG 500 170 $1,095.63 PS 300 S 10 PL 500 162 $973.48 PS 300 S 20 GR 500 162 $1,054.56 PS 300 S 20 PG 500 170 $1,070.27 PS 300 S 20 PL 500 162 $973.48 6 Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 ft. PS 300 2T3 Two PCS. PS 210 Welded Back To Back 1 5/8" x 3 1/4" x 14 Ga. With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 210 EH 2T3 10 PG 250 290 $2,785.81 PS 210 EH 2T3 20 HG 300 290 $3,125.19 PS 210 EH 2T3 20 PG 300 290 $2,785.81 PS 210 EH 2T3 20 PL 300 290 $2,082.85 PS 300 EH 10 PS 300 EH 10 PS 300 EH 10 PS 300 EH 10 PS 300 EH 10 PS 300 EH 20 PS 300 EH 20 PS 300 EH 20 PS 300 EH 20 PS 300 EH 20 ---- www.power-strut.com ---- Welded Channel Two PCS. PS 300 WeldedBack To Back1 5/8" x 2 3/4" x 12 Ga. PS 300 2T3 10 PS 300 2T3 10 PS 300 2T3 10 PS 300 2T3 20 PS 300 2T3 20 PS 300 2T3 20 PS 300 2T3 20 GR PG PL GR HG PG PL 250 250 250 300 300 300 300 346 352 346 354 366 366 354 $1,857.78 $1,828.43 $1,686.18 $1,857.78 $2,327.95 $1,828.43 $1,686.18 PS 349 Continuous Concrete Insert; Without Closure Strip and End Cap PS 349 CS/EC 10 HG 250 1823 $18,713.99 PS 349 CS/EC 10 PG 250 1793 $13,643.26 PS 349 CS/EC 10 PL 250 1793 $13,070.18 PS 349 CS/EC 20 HG 250 3630 $31,490.85 PS 349 CS/EC 20 PG 200 3630 $24,073.93 PS 349 CS/EC 20 PL 250 3570 $24,780.74 PS 349 W/O 10 HG 250 1807 $14,652.12 PS 349 W/O 10 PG 250 1807 $11,842.27 PS 349 W/O 10 PL 250 1777 $10,962.20 PS 349 W/O 20 HG 250 3614 $27,210.01 PS 349 W/O 20 PG 250 3614 $21,930.29 PS 349 W/O 20 PL 250 3554 $20,303.77 PS 400 1 5/8" x 1" x 12 Ga. Channel PS 400 10 HG 500 PS 400 10 PG 500 PS 400 10 PL 500 PS 400 20 GR 500 PS 400 20 HG 500 PS 400 20 PG 500 PS 400 20 PL 500 149 149 146 146 149 149 146 $864.52 $682.22 $548.75 $625.63 $889.22 $682.22 $548.75 137 140 140 137 137 140 140 137 $761.51 $897.08 $773.81 $720.54 $761.51 $922.71 $792.14 $720.54 PS 400 EH 1 5/8" x 1" x 12 Ga. Channel With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 400 EH 10 PS 400 EH 10 PS 400 EH 10 PS 400 EH 10 PS 400 EH 20 PS 400 EH 20 PS 400 EH 20 PS 400 EH 20 GR HG PG PL GR HG PG PL 500 500 500 500 500 500 500 500 PS 400 H 1 5/8" x 1" x 12 Ga. Channel; With 9/16" Holes On 1 7/8" Centers PS 400 H 10 GR 500 141 $937.02 PS 400 H 10 PG 500 144 $953.33 PS 400 H 20 GR 500 141 $937.02 PS 400 H 20 PG 500 144 $931.26 PS 400 H 20 PL 500 141 $836.62 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 ft. PS 400 S GR HG PG PL GR PG PL 500 500 500 500 500 500 500 135 $847.78 135 $1,027.69 138 $842.53 135 $807.71 135 $847.78 138 $862.49 135 $807.71 PS 400 2T3 GR HG PG PL GR HG PG PL 250 250 250 250 300 300 300 300 292 298 298 292 292 298 298 292 $1,789.09 $1,835.83 $1,748.23 $1,606.84 $1,789.09 $1,915.65 $1,824.24 $1,606.84 PS 449 Continuous Concrete Insert; w/o Closure Strip and End Cap PS 449 CS/EC 10 HG 250 1549 $19,242.20 PS 449 CS/EC 10 PL 250 1519 $11,593.90 PS 449 CS/EC 20 PG 250 3086 $25,044.68 PS 449 CS/EC 20 PL 250 3026 $23,187.64 PS 449 W/O 10 PG 250 1537 $10,650.48 PS 449 W/O 10 PL 250 1507 $9,864.34 PS 449 W/O 20 HG 250 3074 $28,484.40 PS 449 W/O 20 PG 250 3074 $19,723.10 PS 449 W/O 20 PL 250 3014 $20,247.79 Std Qty Wt./ 100 List Price per 100 ft. 1 5/8" x 13/16" x 14 Ga. Channel; With 9/16" Holes On 1 7/8" Centers PS 500 H 10 GR 500 97 $590.80 PS 500 H 10 HG 500 102 $698.21 PS 500 H 10 PG 500 87 $595.61 PS 500 H 10 PL 500 97 $581.90 PS 500 H 10 ZD 500 97 $609.72 PS 500 H 20 GR 500 97 $590.80 PS 500 H 20 HG 500 102 $698.21 PS 500 H 20 PG 500 87 $595.61 1 5/8" x 13/16" x 14 Ga. Channel; With 13/32" x 3" Slots On 4" Centers PS 500 S 10 GR 500 92 $583.98 PS 500 S 10 HG 500 100 $682.05 PS 500 S 10 PG 500 97 $586.50 PS 500 S 10 ZD 500 92 $609.72 PS 500 S 20 GR 500 92 $583.98 PS 500 S 20 HG 500 100 $698.21 PS 500 S 20 PG 500 97 $596.63 PS 500 S 20 PL 500 92 $581.90 PS 500 S 20 ZD 1000 92 $609.72 PS 500 2T3 Two Pcs. PS 500 Welded Back to Back 1 5/8" x 1 5/8" x 14 Ga. PS 500 2T3 10 PS 500 2T3 10 PS 500 2T3 10 PS 500 2T3 10 PS 500 2T3 10 PS 500 2T3 20 PS 500 2T3 20 PS 500 2T3 20 PS 500 2T3 20 PS 500 2T3 20 PS 500 1 5/8" x 13/16" x 14 Ga. Channel PS 500 10 AL 500 PS 500 10 GR 500 PS 500 10 HG 500 PS 500 10 PG 500 PS 500 10 PL 500 PS 500 10 ZD 500 PS 500 20 GR 500 PS 500 20 HG 500 PS 500 20 PG 500 PS 500 20 PL 500 PS 500 20 ZD 500 45 100 105 98 100 100 100 105 98 100 100 $832.42 $479.30 $599.91 $464.49 $439.89 $490.04 $479.30 $614.13 $490.04 $439.89 $490.04 GR HG PG PL ZD GR HG PG PL ZD 250 250 250 250 500 300 300 300 300 300 200 210 210 200 174 200 210 210 200 174 $1,227.44 $1,460.73 $1,335.61 $1,229.34 $1,335.55 $1,227.44 $1,524.24 $1,335.61 $1,178.12 $1,393.62 PS 500 2T3 Two Pcs. PS 500 Welded Back to Back With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 500 EH 2T3 10 GR 250 200 $1,862.33 PS 500 EH 2T3 10 PG 250 174 $1,987.29 PS 500 EH 2T3 20 PG 300 174 $1,987.29 PS 500 EH 2T3 20 ZD 300 174 $2,073.69 PS 520 PS 500 EH 1 5/8" x 13/16" x 14 Ga. Channel With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 500 EH 10 PS 500 EH 10 PS 500 EH 10 PS 500 EH 10 PS 500 EH 10 PS 500 EH 20 PS 500 EH 20 PS 500 EH 20 PS 500 EH 20 Part No. & Length Fin. PS 500 S Welded Back To Back 1 5/8" x 2" x 12 Ga. PS 400 2T3 10 PS 400 2T3 10 PS 400 2T3 10 PS 400 2T3 10 PS 400 2T3 20 PS 400 2T3 20 PS 400 2T3 20 PS 400 2T3 20 PS 500 H 1 5/8" x 1" x 12 Ga. Channel With 13/32" x 3" Slots On 4" Centers PS 400 S 10 PS 400 S 10 PS 400 S 10 PS 400 S 10 PS 400 S 20 PS 400 S 20 PS 400 S 20 ---- www.power-strut.com ---- GR HG PG PL ZD GR HG PG ZD 500 500 500 500 500 500 500 500 500 94 99 87 94 94 94 99 87 94 $526.77 $575.59 $534.56 $540.90 $546.32 $555.74 $575.59 $534.56 $563.96 1 5/8" x 13/16" x 12 Ga. Channel PS 520 10 GR 500 PS 520 10 HG 500 PS 520 10 PG 500 PS 520 10 PL 500 PS 520 10 ZD 500 PS 520 20 GR 500 PS 520 20 HG 500 PS 520 20 PG 500 PS 520 20 PL 500 PS 520 20 ZD 500 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 127 127 127 127 127 127 127 127 127 127 $642.46 $865.25 $653.42 $602.04 $653.42 $642.46 $889.97 $653.42 $602.04 $668.91 7 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 ft. PS 520 EH PS 520 S 1 5/8" x 13/16" x 12 Ga. Channel; With 13/32" x 3" Slots On 4" Centers PS 520 S 10 GR 500 127 $752.84 PS 520 S 10 HG 500 127 $883.16 PS 520 S 10 PG 500 127 $780.80 PS 520 S 10 PL 500 116 $769.08 PS 520 S 10 ZD 500 127 $799.30 PS 520 S 20 GR 500 127 $738.57 PS 520 S 20 HG 500 123 $883.16 PS 520 S 20 PG 500 127 $780.80 PS 520 S 20 PL 500 116 $769.08 PS 520 S 20 ZD 1000 127 $799.30 PS 520 H 1 5/8" x 13/16" x 12 Ga. Channel; With 9/16" Holes On 1 7/8" Centers PS 520 H 10 GR 500 119 $778.62 PS 520 H 10 HG 500 99 $883.16 PS 520 H 10 PG 500 127 $782.25 PS 520 H 10 PL 500 119 $769.08 PS 520 H 20 GR 500 127 $797.07 PS 520 H 20 PG 500 119 $800.79 PS 520 H 20 PL 500 119 $751.27 PS 520 2T3 Two pcs. PS 520 Welded Back to Back 1 5/8" x 1 5/8" x 12 Ga. Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 ft. 79 79 79 79 79 $513.13 $534.45 $482.99 $525.29 $534.45 GR HG PG PL GR HG PG PL ZD 250 250 250 250 300 300 300 300 300 254 254 254 254 254 254 254 254 254 $1,478.45 $1,920.97 $1,453.16 $1,465.46 $1,478.45 $1,920.97 $1,453.16 $1,465.46 $1,516.34 PS 520 2T3 Two pcs. PS 520 Welded Back to Back. With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 520 EH 2T3 20 PS 520 EH 2T3 20 PS 520 EH 2T3 20 PS 520 EH 2T3 20 GR HG PG ZD 300 300 300 300 256 268 256 256 $2,362.01 $2,303.91 $2,374.43 $2,374.43 82 82 82 82 82 $431.72 $441.86 $431.72 $695.64 $450.19 PS 560 1 5/8" x 13/16" x 16 Ga. Channel PS 560 10 GR 500 PS 560 10 PG 500 PS 560 20 GR 500 PS 560 20 HG 500 PS 560 20 PG 500 1 5/8" x 13/16" x 16 Ga. Channel With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 560 EH 10 PS 560 EH 10 PS 560 EH 10 PS 560 EH 20 PS 560 EH 20 GR PG PL GR PG 500 500 500 500 500 PS 560 S 1 5/8" x 13/16" x 16 Ga. Channel; With 13/32" x 3" Slots On 4" Centers PS 560 S 10 GR 500 78 $593.98 PS 560 S 10 PG 500 78 $722.37 PS 560 S 10 PL 500 78 $546.53 PS 560 S 20 GR 500 78 $593.98 PS 560 S 20 PG 500 78 $722.37 PS 560 S 20 PL 500 78 $546.53 PS 560 H 1 5/8" x 13/16" x 16 Ga. Channel; With 9/16" Holes On 1 7/8" Centers PS 560 H 10 GR 500 79 $593.98 PS 560 H 10 PG 500 79 $722.37 PS 560 H 10 PL 500 79 $546.53 PS 560 H 20 GR 500 79 $593.98 PS 560 H 20 PG 500 79 $722.37 PS 560 H 20 PL 500 79 $546.53 PS 560 2T3 Welded Channel; 1 5/8" x 1 5/8" x 16 Ga. PS 560 2T3 10 GR 250 PS 560 2T3 10 HG 250 PS 560 2T3 10 PG 250 PS 560 2T3 20 GR 300 PS 560 2T3 20 HG 300 PS 560 2T3 20 PG 300 PS 560 2T3 20 PL 300 164 164 164 164 164 164 164 $1,270.04 $1,685.43 $1,326.42 $1,270.04 $1,685.43 $1,326.42 $1,122.19 37 37 37 37 $578.04 $647.99 $580.49 $554.43 26 26 26 $416.48 $477.77 $414.82 PS 600J 8 PS 560 EH 1 5/8" x 13/16" x 12 Ga. ; With 1 1/8" x 9/16" Elongated Holes On 2" Centers PS 520 EH 10 GR 500 127 $739.31 PS 520 EH 10 HG 500 119 $897.77 PS 520 EH 10 GR 500 127 $739.31 PS 520 EH 10 PL 500 119 $719.79 PS 520 EH 10 ZD 500 127 $746.97 PS 520 EH 20 GR 500 127 $739.31 PS 520 EH 20 HG 500 99 $919.05 PS 520 EH 20 PG 500 127 $746.97 PS 520 EH 20 PL 500 119 $736.85 PS 520 EH 20 ZD 1000 127 $764.67 PS 520 2T3 10 PS 520 2T3 10 PS 520 2T3 10 PS 520 2T3 10 PS 520 2T3 20 PS 520 2T3 20 PS 520 2T3 20 PS 520 2T3 20 PS 520 2T3 20 ---- www.power-strut.com ---- Channel Junior Strut - 13/16" x 13/16" x 19 Ga. PS 600J 10 GR 500 PS 600J 10 PG 500 PS 600J 10 PL 500 PS 600J 16 GR 800 PS 700J 13/16" x 13/32" x 19 Ga. Channel PS 700J 10 GR 1000 PS 700J 10 PG 1000 PS 700J 10 PL 1000 PS 707, PS707P Raceway Closure Strip; For All 1 5/8" Width Channels (10' length); U.L. Listed When Used With Channel To Form Surface Raceway PS 707 10 GR PVC PS 707 10 GR PS 707 10 PVC PS 707 10 PG PS 707 10 PL PS 707P 10 GR PS 707P 10 GREY PS 707P 10 WHITE 200 500 200 500 500 200 500 200 10 41 10 41 41 10 11 10 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. $387.57 $356.96 $387.57 $345.58 $273.44 $805.06 $770.02 $757.87 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PA 158 List Price per 100 pcs Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS NS Slotted Angle per 100 ft. 1 5/8" x 1 5/8" x 14 ga. PA 158 10 GR 100 66 $424.64 PA 158 10 PG 100 66 $408.01 PA 158 10 ZD 100 66 $427.81 PA 158 12 PG 120 66 $424.64 PA 238 Slotted Angle per 100 ft. 1 5/8" x 2 3/8" x 14 ga. PA 238 10 GR 100 80 $477.98 PA 238 10 PG 100 80 $459.04 PA 238 10 ZD 100 80 $589.71 PA 238 12 GR 120 80 $487.00 PA 238 12 PG 120 80 $472.57 PA 318 Slotted Angle per 100 ft. 1 5/8" x 3 1/8" x 12 ga. PA 318 10 GR 100 130 $664.61 PA 318 10 PG 100 130 $639.53 PA 318 10 ZD 100 130 $677.15 PA 318 12 GR 120 130 $677.15 PA 318 12 PG 120 130 $657.09 PA 1 GP Gusset Plate PA 1 GP PG 25 9 $265.44 PS LS Clamping Nut With Long Spring Use With PS 100 and PS 150 Channel PS LS 1/2 EG 50 9 $322.87 PS LS 1/2 HG 50 10 $862.54 PS LS 1/4 EG 50 7 $301.80 PS LS 3/4 EG 50 13 $619.28 PS LS 3/8 EG 50 10 $304.72 PS LS 5/8 EG 50 15 $549.28 PS TG Top Grip Nut With Spring On Top Use With All 1 5/8" Channel PS TG 1/4 PS TG 1/4 PS TG 3/8 PS TG 3/8 PS TG 5/16 PS TG 1/2 ---- www.power-strut.com ---- EG ZD EG ZD EG EG 100 100 100 100 100 100 7 7 10 10 9 8 $253.40 $269.84 $263.99 $279.08 $270.95 $282.31 Clamping Nut With Out Spring; Use With All 1 5/8" Wide Channel PS NS 1/2 EG 100 11 $181.49 PS NS 1/2 HG 100 9 $507.14 PS NS 1/2 ZD 100 11 $191.41 PS NS 1/4 EG 100 5 $176.93 PS NS 1/4 HG 100 5 $626.95 PS NS 1/4 ZD 100 5 $186.60 PS NS 10-24 EG 100 6 $510.81 PS NS 10-32 EG 100 6 $514.75 PS NS 3/4 EG 100 11 $410.08 PS NS 3/4 HG 100 11 $419.80 PS NS 3/8 EG 100 8 $159.90 PS NS 3/8 HG 100 8 $522.02 PS NS 3/8 ZD 100 8 $172.69 PS NS 5/16 EG 100 5 $204.38 PS NS 5/8 EG 100 13 $354.10 PS NS 5/8 HG 100 13 $763.58 PS NS 7/8 EG 100 11 $427.81 PS NS 7/8 HG 100 13 $1,064.15 PS NS 8-32 EG 100 7 $512.41 PS NS S 1/2 EG 100 7 $218.93 PS NS S 3/4 EG 100 8 $484.08 PS NS S 3/8 EG 100 8 $150.11 PS NS S 5/8 EG 100 10 $433.31 PS RS Clamping Nut With Regular Spring; Use With PS 200, PS 210 and PS 300 PS RS 1/2 EG 100 10 $210.46 PS RS 1/2 HG 100 10 $676.68 PS RS 1/2 ZD 100 10 $223.09 PS RS 1/4 EG 100 6 $176.70 PS RS 1/4 ZD 100 6 $187.30 PS RS 10-24 EG 100 6 $555.32 PS RS 10-32 EG 100 6 $550.81 PS RS 3/4 EG 100 12 $511.92 PS RS 3/4 HG 100 12 $1,203.74 PS RS 3/8 EG 100 8 $189.58 PS RS 3/8 HG 100 8 $636.03 PS RS 3/8 ZD 100 8 $200.79 PS RS 5/16 EG 100 6 $242.30 PS RS 5/16 HG 100 6 $633.65 PS RS 5/8 EG 100 14 $450.28 PS RS 7/8 EG 100 21 $683.84 PS RS 8/32 EG 100 6 $557.96 PS SS Clamping Nut With Short Spring Use With PS 400 and PS 500 PS SS 1/2 EG 100 7 $227.42 PS SS 1/2 ZD 100 7 $231.65 PS SS 1/4 EG 100 6 $195.96 PS SS 1/4 HG 100 8 $526.21 PS SS 1/4 ZD 100 6 $199.60 PS SS 10-24 EG 100 8 $552.55 PS SS 10-32 EG 100 6 $654.56 PS SS 3/8 EG 100 8 $208.54 PS SS 3/8 HG 100 10 $689.23 PS SS 3/8 ZD 100 8 $208.48 PS SS 5/16 EG 100 8 $228.82 PS SS 8/32 EG 100 6 $553.89 PS SS S 3/4 EG 100 9 $720.06 PS SS S 5/8 EG 100 10 $738.79 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 9 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. PS 004T thru PS 106N Std Qty Cush‚ÄìA‚ÄìClamp¬Æ Assembly PS 004T EG 25 PS 004T SS 25 PS 004T ZD 25 PS 006T EG 25 PS 006T SS 25 PS 006T ZD 25 PS 008T EG 25 PS 008T SS 25 PS 008T ZD 25 PS 009N EG 25 PS 009N SS 25 PS 009N ZD 25 PS 010T EG 25 PS 010T SS 25 PS 010T ZD 25 PS 011N EG 25 PS 011N SS 25 PS 011N ZD 25 PS 012T EG 25 PS 012T SS 25 PS 012T ZD 25 PS 014N EG 25 PS 014N SS 25 PS 014N ZD 25 PS 014T EG 25 PS 014T SS 25 PS 014T ZD 25 PS 016T EG 20 PS 016T SS 20 PS 016T ZD 25 PS 017N EG 25 PS 017N SS 25 PS 017N ZD 25 PS 018T EG 10 PS 018T SS 20 PS 018T ZD 10 PS 020T EG 10 PS 020T SS 20 PS 020T ZD 10 PS 021N EG 20 PS 021N SS 20 PS 021N ZD 20 PS 022T EG 10 PS 022T SS 20 PS 022T ZD 20 PS 024N EG 10 PS 024N SS 20 PS 024N ZD 20 PS 026N EG 10 PS 026N SS 20 PS 026N ZD 20 PS 026T ZD 20 PS 027N EG 20 PS 027N SS 20 PS 027N ZD 20 PS 028N EG 10 PS 028N SS 10 PS 028N ZD 10 PS 030N EG 10 PS 030N SS 10 PS 030N ZD 10 10 Wt./ 100 10 10 10 11 11 11 13 13 13 13 13 13 14 14 14 14 14 14 14 14 14 15 15 15 15 15 15 17 17 17 17 17 17 18 18 18 18 18 18 19 19 19 20 20 20 33 33 33 35 35 35 35 35 35 35 37 37 37 39 39 39 ---- www.power-strut.com ---- List Price per 100 pcs $757.87 $1,910.44 $775.83 $757.87 $1,910.44 $757.87 $757.87 $1,968.36 $757.87 $774.37 $2,053.94 $792.72 $774.37 $2,204.83 $774.37 $793.66 $2,204.83 $812.46 $793.66 $2,597.55 $793.66 $897.99 $3,337.89 $919.27 $897.99 $3,337.89 $897.99 $1,036.27 $3,458.56 $1,036.27 $1,066.02 $4,062.44 $1,091.22 $1,066.02 $4,062.44 $1,065.96 $1,394.98 $4,304.22 $1,394.98 $1,375.05 $4,681.72 $1,394.98 $1,223.43 $4,334.92 $1,276.62 $1,495.26 $4,502.62 $1,473.90 $1,478.62 $6,524.27 $1,478.62 $1,542.90 $1,831.61 $6,947.16 $1,911.24 $1,896.72 $6,432.56 $1,979.19 $2,405.94 $7,702.33 $2,803.86 Part No. & Length Fin. Std Qty Wt./ 100 PS 032N PS 032N PS 032N PS 034N PS 034N PS 034T PS 038N PS 038N PS 038N PS 040N PS 040N PS 040N PS 042N PS 042N PS 042N PS 046N PS 046N PS 048N PS 048N PS 048N PS 050N PS 050N PS 050N PS 056N PS 056N PS 056N PS 058N PS 058N PS 058N PS 064N PS 064N PS 064N PS 066N PS 066N PS 066N PS 069N PS 072N PS 072N PS 082N PS 082N PS 089N PS 089N PS 098N PS 098N PS 106N PS 106N 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 10 5 10 10 10 5 10 10 10 10 10 10 10 10 10 10 41 41 41 46 46 46 47 47 47 49 49 49 51 51 51 55 55 57 57 57 60 60 60 64 64 64 70 70 70 88 88 88 94 94 94 94 111 111 125 125 130 130 130 130 140 140 $3,142.81 $8,457.50 $3,142.81 $2,803.86 $8,759.55 $2,803.86 $3,251.15 $10,571.88 $3,251.09 $3,505.43 $12,384.05 $3,505.43 $3,173.53 $14,196.44 $3,311.51 $4,313.03 $4,500.55 $4,429.05 $17,820.93 $4,621.61 $4,615.40 $19,633.26 $4,984.63 $6,502.25 $21,445.82 $7,022.43 $7,214.59 $21,672.38 $7,214.59 $9,443.46 $21,974.21 $8,743.94 $9,412.14 $22,049.88 $9,412.14 $14,045.49 $13,681.58 $14,776.11 $20,746.70 $20,746.70 $21,983.02 $21,983.02 $27,878.51 $27,878.51 $28,632.42 $28,632.42 12 36 32 9 492 563 42 72 84 93 10 102 123 243 293 $2,515.30 $3,489.35 $3,272.30 $2,465.84 $31,512.91 $40,399.42 $3,641.27 $5,245.07 $5,195.27 $5,614.16 $2,558.91 $5,955.19 $8,312.45 $11,801.80 $18,935.79 EG SS ZD EG SS ZD EG SS ZD EG SS ZD EG SS ZD EG ZD EG SS ZD EG SS ZD EG SS ZD EG SS ZD EG SS ZD EG SS ZD ZD EG ZD EG ZD EG ZD EG ZD EG ZD List Price per 100 pcs PS UB Cush‚ÄìA‚ÄìClamp¬Æ Assembly U‚ÄìBolt Series PS UB 1 EG 25 PS UB 1-1/2 EG 10 PS UB 1-1/4 EG 10 PS UB 1/2 EG 25 PS UB 10 EG - PS UB 12 EG 5 PS UB 2 EG 10 PS UB 2-1/2 EG 10 PS UB 3 EG - PS UB 3-1/2 EG - PS UB 3/4 EG 25 PS UB 4 EG - PS UB 5 EG - PS UB 6 EG - PS UB 8 EG - GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate thru PSx multiplier) 038M discount. Note: Less than box/bundle quantitiesPS will 004M meet with a (list ---- PS2012 • Effective September 3, 2012 --- Part No. Std Wt./ List Price & Length Fin. Qty 100 per 100 pcs Cush‚ÄìA‚ÄìClamp¬Æ Assembly Omega Series PS 004M ZD 5 3 $708.63 PS 006M ZD 5 4 $725.17 PS 008M ZD 5 6 $738.85 PS 010M ZD 5 6 $738.85 PS 012M ZD 5 7 $753.85 PS 014M ZD 5 7 $784.13 PS 016M ZD 5 8 $795.45 PS 018M20 ZD 5 8 $829.29 PS 018M21 ZD 5 8 $810.10 PS 020M ZD 10 17 $1,070.39 PS 021M ZD 10 20 $1,087.39 PS 022M ZD 10 19 $1,100.61 PS 024M ZD 10 20 $1,115.78 PS 026M ZD 10 23 $1,145.83 PS 027M ZD 10 32 $1,266.55 PS 028M ZD 10 32 $1,326.77 PS 030M ZD 10 34 $1,372.04 PS 032M ZD 10 36 $1,417.43 PS 034M ZD 10 41 $1,522.76 PS 038M ZD 10 41 $1,907.25 PS 51 Right Angle Pipe Or Conduit Clamp PS 51 1 PS 51 1 PS 51 1-1/2 PS 51 1-1/4 PS 51 1/2 PS 51 2 PS 51 2 PS 51 2-1/2 PS 51 3 PS 51 3-1/2 PS 51 3/4 PS 51 3/8 PS 51 4 PS 51 6 EG HG EG EG EG EG HG EG EG EG EG EG EG EG 50 50 50 50 50 50 50 25 25 25 50 50 15 - 47 47 57 54 41 85 85 106 110 128 42 25 140 375 $869.89 $1,643.82 $1,197.10 $1,002.75 $809.71 $1,565.34 $6,081.41 $1,591.34 $2,127.88 $2,870.32 $815.38 $895.23 $3,153.02 $14,332.67 PS 52 E Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs EG EG EG EG EG EG EG EG EG EG EG EG 50 50 50 50 25 25 20 50 15 10 10 5 29 27 21 31 71 78 84 22 139 166 226 332 $622.39 $762.14 $472.24 $979.72 $1,355.53 $1,578.34 $2,534.44 $702.19 $2,951.94 $2,485.04 $5,466.67 $7,677.78 EG EG EG EG EG EG EG 50 50 50 50 25 50 25 9 11 10 9 25 9 118 $292.47 $317.21 $296.35 $286.13 $512.64 $282.64 CALL EG ZD EG ZD EG EG ZD EG EG EG 100 250 500 500 50 500 500 200 100 25 4 4 1 1 12 2 2 1 7 19 $69.81 $72.12 $31.07 $40.03 $175.11 $39.24 $40.62 $39.90 $101.18 $445.44 PS 67 Pipe Or Conduit Hanger PS 67 1-1/2 PS 67 1-1/4 PS 67 1/2 PS 67 2 PS 67 2-1/2 PS 67 3 PS 67 3-1/2 PS 67 3/4 PS 67 4 PS 67 5 PS 67 6 PS 67 8 PS 69 E-Z Grip Hanger PS 69 1 PS 69 1-1/2 PS 69 1-1/4 PS 69 1/2 PS 69 2-1/2 PS 69 3/4 PS 69 6 PS 83 Hexagon Nut PS 83 1/2 PS 83 1/2 PS 83 1/4 PS 83 1/4 PS 83 3/4 PS 83 3/8 PS 83 3/8 PS 83 5/16 PS 83 5/8 PS 83 7/8 PS 85 Rod Or Insulator Support Parallel Pipe And Conduit Clamp PS 52E 1 PS 52E 1-1/2 PS 52E 1-1/4 PS 52E 1/2 PS 52E 2 PS 52E 2-1/2 PS 52E 3 PS 52E 3-1/2 PS 52E 3/4 PS 52E 4 ---- www.power-strut.com ---- EG EG EG EG EG EG EG EG EG EG 50 50 50 50 50 25 10 10 50 10 70 93 72 59 128 135 155 190 64 205 $1,360.68 $1,870.95 $1,653.55 $1,321.63 $3,054.87 $4,430.20 $4,604.21 $4,926.59 $1,356.36 $5,056.15 PS 85 1/2 EG 25 202 $2,245.72 PS 85 1/2 HG 25 145 $4,285.56 PS 85 1/4 EG 50 23 $586.68 PS 85 3/8 EG 25 18 $1,459.53 PS 86 Clamp With Locknut PS 86 1/2 EG 50 28 $1,143.15 PS 86 3/8 EG 50 29 $848.49 PS 86 5/8 EG 50 42 $1,810.90 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 11 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 93 List Price per 100 pcs EG ZD EG PL ZD EG PL ZD 50 50 50 50 50 50 50 50 63 $1,677.53 63 $1,677.53 75 $1,271.30 75 $1,246.40 75 $1,311.94 41 $952.97 36 $940.68 41 $953.30 Top Beam"C" Clamp PS 94 5/8 EG 25 66 $1,960.30 PS 94 5/8 EG 25 66 $1,960.30 PS 94 5/8 PL 25 66 $1,781.91 PS 95 EG PL ZD EG PL ZD EG PL ZD 50 50 50 50 50 50 50 50 50 41 $825.38 41 $808.06 41 $850.59 35 $781.97 33 $757.00 35 $796.72 67 $1,531.23 67 $1,454.64 67 $1,531.17 PS 135 1 EG PS 135 1-1/2 EG PS 135 1-1/4 EG PS 135 1/2 EG PS 135 1/2 ZD PS 135 1/4 EG PS 135 1/4 ZD PS 135 3/4 EG PS 135 3/4X5/8 EG PS 135 3/8 1/4 EG PS 135 3/8 EG PS 135 3/8 ZD PS 135 5/16 EG PS 135 5/8 EG PS 135 7/8 EG - 5 10 50 50 100 100 25 50 100 100 100 100 25 10 71 126 131 11 11 2 2 29 32 1 11 11 13 24 57 PS 135 Rod Coupling PS 135x $1,639.24 $5,332.65 $5,829.38 $409.06 $423.98 $208.15 $212.07 $1,265.30 $894.55 $125.30 $280.10 $295.42 $380.59 $778.54 $3,142.48 Beam Clamp Light Duty PS 135X 1/4 EG 50 14 $446.79 12 Std Qty Wt./ 100 List Price per 100 pcs "U" Bolt With Nuts Long Tangent PS 137 1 1/2 EG 50 PS 137 1 1/4 EG 50 PS 137 2 1/2 EG 50 PS 137 2 EG 50 PS 137 3 EG 50 PS 137 3/4 EG 100 PS 137 4 EG 25 PS 137 8 EG 25 30 23 87 33 96 11 110 230 $726.39 $706.04 $1,217.78 $733.63 $1,326.78 $583.47 $1,446.31 $4,973.73 20 24 6 12 EG 220 219 220 220 10 $1,419.67 $1,419.67 $1,419.67 $1,419.67 510 EG 12 425 6 EG 236 $3,451.06 10 352 EG 12 352 EG 10 287 EG 12 236 120 144 36 72 72 500 600 150 300 300 50 60 15 30 250 250 300 75 150 150 350 420 80 96 48 40 96 24 53 $290.03 53 $300.23 53 $305.89 53 $300.23 53 $300.23 12 $98.83 12 $102.30 12 $104.23 12 $102.30 12 $104.23 123 $726.90 123 $733.82 123 $747.67 123 $726.90 29 $150.26 29 $159.27 29 $156.57 29 $162.28 29 $156.57 29 $162.28 20 $159.27 20 $162.28 84 $492.92 84 $502.22 84 $492.92 169 $1,061.00 169 $1,061.00 85 $1,061.00 PS 146 PS 94 Clamp With Locknut PS 95 1/2 PS 95 1/2 PS 95 1/2 PS 95 3/8 PS 95 3/8 PS 95 3/8 PS 95 5/8 PS 95 5/8 PS 95 5/8 Part No. & Length Fin. PS 137 Top Beam"C" Clamp PS 92 1/2 PS 92 1/2 PS 93 1/2 PS 93 1/2 PS 93 1/2 PS 93 3/8 PS 93 3/8 PS 93 3/8 ---- www.power-strut.com ---- Continuous Threaded Rod PS 146 1 X 10 EG PS 146 1 X 12 EG PS 146 1 X 3 EG PS 146 1 X 6 EG PS 146 1-1/2 X 10 $3,195.42 PS 146 1-1/2 X 12 $3,451.06 PS 146 1-1/2 X 6 EG PS 146 1-1/4 X 10 $2,393.72 PS 146 1-1/4 X 12 $2,393.72 PS 146 1-1/8 X 10 $1,880.11 PS 146 1-1/8 X 12 $1,880.11 PS 146 1/2 X 10 EG PS 146 1/2 X 12 EG PS 146 1/2 X 3 EG PS 146 1/2 X 6 EG PS 146 1/2 X 6 ZD PS 146 1/4 X 10 EG PS 146 1/4 X 12 EG PS 146 1/4 X 3 EG PS 146 1/4 X 6 EG PS 146 1/4 X 6 ZD PS 146 3/4 X 10 EG PS 146 3/4 X 12 EG PS 146 3/4 X 3 EG PS 146 3/4 X 6 EG PS 146 3/8 X 10 EG PS 146 3/8 X 10 ZD PS 146 3/8 X 12 EG PS 146 3/8 X 3 EG PS 146 3/8 X 6 EG PS 146 3/8 X 6 ZD PS 146 5/16 X 10 EG PS 146 5/16 X 12 EG PS 146 5/8 X 10 EG PS 146 5/8 X 12 EG PS 146 5/8 X 6 EG PS 146 7/8 X 10 EG PS 146 7/8 X 12 EG PS 146 7/8 X 6 EG GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 152 List Price per 100 pcs PL PL PL PL PL 35 15 35 30 15 32 64 31 37 71 $2,754.16 $4,060.61 $2,406.88 $3,340.81 $4,302.39 PS 202 Eyelet PS 202 1/2 EG 100 14 $2,593.38 PS 202 3/8 EG 25 11 $2,335.79 PS 203 Linked Eyelet With Stud PS 203 1/2 EG 50 37 $2,744.09 PS 203 3/8 EG 50 26 $2,336.13 PS 204 Linked Eyelet PS 204 1/2 EG 50 28 $2,911.71 PS 204 3/8 EG 100 21 $2,827.07 PS 205 Eyelet With Stud PS 205 1/2 EG 100 18 $1,916.30 PS 205 3/8 EG 25 13 $1,583.13 PS 209 Flat Washer PS 209 1/2 PS 209 1/2 PS 209 1/4 PS 209 1/4 PS 209 3/4 PS 209 3/8 PS 209 5/16 PS 209 5/8 Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs ZD ZD EG ZD 100 100 100 100 5 2 11 2 $126.90 $95.42 $181.68 $98.17 EG EG EG EG EG EG EG EG EG 50 25 25 25 25 25 25 50 50 9 19 11 23 27 42 29 8 6 $144.49 $274.33 $188.03 $621.80 $347.47 $857.57 $689.74 $132.87 $114.83 Light Weight Concrete Insert PS 285 1/2 NUT EG 50 PS 285 1/2 NUT PL 100 PS 285 1/4 NUT EG 100 PS 285 3/8 NUT EG 100 PS 285 5/8 NUT EG 100 PS 285 BOX PG - 12 12 9 13 11 53 $339.05 $187.35 $419.36 $605.63 $802.47 $893.63 PS 230 Screw Concrete Insert PS 152 1/2 PS 152 3/4 PS 152 3/8 PS 152 5/8 PS 152 7/8 ---- www.power-strut.com ---- EG ZD EG ZD EG ZD EG EG 100 250 200 500 100 500 200 100 4 4 1 1 11 2 0 8 $45.06 $45.84 $23.45 $32.82 $163.20 $34.85 $24.61 $96.69 EG ZD EG ZD EG AL EG ZD EG 100 100 1500 1500 100 100 100 100 100 1 1 2 2 4 1 1 1 2 $38.09 $38.81 $23.37 $23.81 $114.83 $125.99 $31.42 $25.07 $60.22 Fender Washer PS 230 1/2 PS 230 1/4 PS 230 3/4 PS 230 3/8 PS 270 Conduit Clamp PS 270 1 PS 270 1-1/2 PS 270 1-1/4 PS 270 2 1/2 PS 270 2 PS 270 3 1/2 PS 270 3 PS 270 3/4 PS 270 3/8-1/2 PS 285 PS 517 Stud Nut With Regular Spring PS 517 1/2 X 1 1/2 PS 517 1/2 X 1 1/4 PS 517 1/2 X 1 PS 517 1/2 X 2 PS 517 1/4 X 1 1/2 PS 517 1/4 X 1 1/4 PS 517 1/4 X 1 PS 517 1/4 X 2 PS 517 3/8 X 1 1/2 PS 517 3/8 X 1 1/4 PS 517 3/8 X 1 PS 517 3/8 X 2 EG EG EG EG EG EG EG EG EG EG EG EG 100 100 50 100 100 50 50 100 100 50 50 100 17 16 15 19 9 8 8 9 14 14 13 15 $1,491.54 $1,478.72 $1,429.94 $1,534.17 $1,122.60 $1,109.83 $1,577.27 $1,079.80 $1,355.07 $1,207.22 $1,563.11 $1,403.97 PS 211 Lock Washer PS 211 1/2 PS 211 1/2 PS 211 1/4 PS 211 1/4 PS 211 3/4 PS 211 3/8 PS 211 3/8 PS 211 3/8 PS 211 5/8 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 13 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 601 List Price per 100 pcs PS 601 AL 50 13 $670.17 PS 601 EG 50 36 $323.83 PS 601 GR 50 36 $335.81 PS 601 HG 50 36 $509.96 PS 601 ZD 50 36 $338.19 PS 602 Three Hole Splice Plate PS 602 EG 25 54 $484.35 PS 602 GR 25 54 $504.41 PS 602 ZD 25 54 $495.24 PS 603 Two Hole End Angle PS 603 EG 50 37 $291.18 PS 603 GR 50 37 $302.32 PS 603 HG 50 38 $487.94 PS 603 ZD 50 37 $304.01 PS 604 Two Hole Corner Angle PS 604 EG 50 36 $310.44 PS 604 GR 50 36 $322.32 PS 604 HG 50 37 $518.67 PS 604 ZD 50 37 $324.12 PS 605 Three Hole Corner Angle PS 605 EG 50 58 $431.85 PS 605 GR 50 58 $441.74 PS 605 ZD 50 58 $444.22 PS 606 Three Hole Corner Angle 14 Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 607 Two Hole Splice Plate PS 606 PS 606 PS 606 PS 606 ---- www.power-strut.com ---- EG GR HG ZD 50 50 50 50 50 50 50 50 $432.24 $442.14 $662.82 $442.14 Four Hole Corner Angle PS 607 EG 25 78 $562.63 PS 607 GR 25 78 $574.79 PS 607 HG 25 79 $841.21 PS 607 ZD 25 78 $595.79 PS 609 Two Hole Offset "Z" Support PS 609 EG 25 38 $625.52 PS 609 GR 25 38 $604.80 PS 611 Zee Support Use With PS 200,PS 210 and PS 500 2T3 PS 611 EG 50 51 $601.34 PS 611 GR 50 51 $619.80 PS 611 HG 50 52 $662.04 PS 611 ZD 50 51 $613.56 PS 612 Zee Support Use With PS 400 PS 612 EG 25 47 $1,003.58 PS 612 GR 25 47 $1,003.58 PS 613 "U" Support Use With PS 200, PS 210, and PS 500 2T3 PS 613 PS 613 PS 613 PS 613 EG GR HG ZD 25 25 25 25 85 85 87 85 $729.84 $743.95 $1,203.32 $743.26 Four Hole Joint Angle Connector PS 614 EG 25 PS 614 GR 25 99 99 $2,159.22 $2,225.15 PS 614 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 615 List Price per 100 pcs Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs 34 34 34 34 $400.03 $397.14 $566.15 $400.03 PS 620 Five Hole Shelf Joint Angle Connector PS 615 EG 10 133 $2,309.96 PS 615 GR 10 133 $2,380.50 Two Hole Connecting Plate PS 620 PS 620 PS 620 PS 620 EG GR HG ZD 50 50 50 50 PS 621 PS 616 Four Hole Splice Clevis; Use With PS 200 and PS 210 PS 616 EG 10 268 $2,192.68 PS 616 GR 10 268 $2,210.59 PS 616 HG 10 273 $2,541.17 PS 616 ZD 10 268 $2,240.09 PS 617 Three Hole Swivel Plate PS 617 EG 25 76 $1,549.09 PS 617 GR 25 73 $1,520.92 PS 617 HG 50 76 $1,626.34 PS 617 ZD 25 76 $1,520.92 PS 618 Two Hole Swivel Plate PS 618 EG 25 56 $656.18 PS 618 GR 50 56 $639.60 PS 618 HG 50 56 $710.81 PS 619 Square Washer PS 619 1/2 PS 619 1/2 PS 619 1/2 PS 619 1/2 PS 619 1/4 PS 619 1/4 PS 619 1/4 PS 619 1/4 PS 619 3/4 PS 619 3/4 PS 619 3/4 PS 619 3/4 PS 619 3/8 PS 619 3/8 PS 619 3/8 PS 619 3/8 PS 619 5/8 PS 619 5/8 PS 619 5/8 PS 619 5/8 PS 619 7/8 PS 619 7/8 PS 619 7/8 ---- www.power-strut.com ---- EG GR HG ZD EG GR HG ZD EG GR HG ZD EG GR HG ZD EG GR HG ZD EG GR HG 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 100 100 100 17 17 17 17 18 18 18 18 16 16 16 16 17 17 17 17 16 16 18 16 14 14 19 $152.65 $162.55 $238.51 $162.55 $177.71 $185.63 $244.47 $185.63 $285.22 $285.22 $304.95 $278.01 $152.65 $158.59 $238.51 $162.55 $206.12 $206.12 $247.45 $200.91 $350.23 $341.38 $396.16 Four Hole Connecting Plate PS 621 4 EG - 73 $1,092.68 PS 621 4 GR - 73 $1,104.96 PS 621 HG - 73 $1,196.03 PS 622 Four Hole Corner Connector PS 622 4 EG - 73 $1,315.23 PS 622 4 GR - 73 $1,315.23 PS 624 Two Hole Closed Angle Connector PS 624 30 DEG EG PS 624 30 DEG GR PS 624 37-1/2 DEG EG PS 624 37-1/2 DEG GR PS 624 45 DEG EG PS 624 45 DEG GR PS 624 45 DEG HG PS 624 45 DEG ZD PS 624 52-1/2 DEG EG PS 624 52-1/2 DEG GR PS 624 60 DEG EG PS 624 60 DEG GR PS 624 67-1/2 DEG EG PS 624 67-1/2 DEG GR PS 624 75 DEG EG PS 624 75 DEG GR PS 624 75 DEG HG PS 624 82-1/2 DEG EG PS 624 82-1/2 DEG GR PS 624 82-1/2 DEG HG 50 25 50 25 25 50 25 25 25 25 25 25 25 25 25 25 25 25 25 25 91 91 58 58 58 58 59 58 58 58 58 58 58 58 58 58 58 58 58 58 $850.83 $835.36 $850.83 $835.36 $674.93 $690.62 $678.07 $690.62 $835.36 $835.36 $850.83 $835.36 $835.36 $835.36 $850.83 $835.36 $928.20 $850.83 $835.36 $928.20 PS 626 Pipe Stop PS 626 PS 626 EG GR 20 20 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 38 38 $835.32 $820.13 15 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 629 ---- www.power-strut.com ---- List Price per 100 pcs Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 645 Three Hole Splice Clevis PS 629 EG 20 197 $2,037.67 PS 629 GR 20 197 $2,072.17 PS 629 HG 20 197 $2,300.25 Three Hole Splice Clevis; Use With PS 500 PS 645 EG 10 125 $1,597.67 PS 645 GR 10 125 $1,596.19 PS 645 HG 10 125 $1,773.52 PS 631 PS 646 Two Hole Splice Clevis Use With PS 200 and PS 210 PS 631 EG 25 119 $1,561.49 PS 631 GR 25 119 $1,534.49 PS 631 HG 25 119 $1,705.01 Four Hole Splice Clevis; Use With PS 500 PS 646 EG 10 175 $1,944.93 PS 646 GR 10 175 $1,977.87 PS 646 HG 10 175 $2,195.67 PS 646 ZD 10 175 $1,977.87 PS 633 Zee Connector 1 7/8" Offset Zee Connection; Use For PS 200 and PS 210 PS 647 EG 25 9 $890.96 PS 647 GR 25 55 $890.14 Two Hole Open Angle Connector PS 633 15 DEG EG 25 PS 633 15 DEG GR 25 PS 633 22-1/2 DEG EG 25 PS 633 22-1/2 DEG GR 25 PS 633 22-1/2 DEG HG 25 PS 633 30 DEG EG 25 PS 633 30 DEG GR 25 PS 633 30 DEG HG 25 PS 633 37-1/2 DEG EG 25 PS 633 37-1/2 DEG GR 25 PS 633 45 DEG EG 25 PS 633 45 DEG GR 25 PS 633 45 DEG ZD 25 PS 633 52-1/2 DEG EG 25 PS 633 52-1/2 DEG GR 25 PS 633 60 DEG EG 25 PS 633 60 DEG GR 25 PS 633 60 DEG HG 25 PS 633 67-1/2 DEG EG 25 PS 633 67-1/2 DEG GR 25 PS 633 67-1/2 DEG HG 25 PS 633 7-1/2 DEG EG 25 PS 633 7-1/2 DEG GR 25 PS 633 75 DEG EG 25 PS 633 75 DEG GR 25 PS 633 75 DEG HG 25 PS 633 82-1/2 DEG EG 25 PS 633 82-1/2 DEG GR 25 PS 633 82-1/2 DEG HG 25 58 58 58 58 58 58 58 69 58 58 58 58 58 58 58 58 58 69 58 58 60 58 58 58 58 58 58 58 58 $835.32 $820.13 $835.32 $820.13 $820.13 $835.32 $835.32 $820.13 $835.32 $820.13 $598.66 $623.46 $627.82 $820.13 $820.13 $835.32 $820.13 $820.13 $820.13 $820.13 $820.13 $820.13 $820.13 $841.40 $820.13 $820.13 $820.13 $820.13 $820.13 PS 644 Two Hole Splice Clevis Use With PS 500 PS 644 EG PS 644 GR 16 20 20 78 78 $1,168.81 $1,149.97 PS 647 PS 649 Raceway Splice Plate U.L. Listed Use With PS 200, PS 210 PS 649 EG 50 134 $1,478.48 PS 649 GR 50 134 $1,517.83 PS 649 ZD 50 134 $1,517.83 PS 651 Reversible Strut Bracket PS 651 12 PS 651 12 PS 651 12 PS 651 12 PS 651 14 PS 651 14 PS 651 14 PS 651 18 PS 651 18 PS 651 18 PS 651 18 PS 651 24 PS 651 24 PS 651 24 PS 651 24 PS 651 30 PS 651 36 PS 651 6 PS 651 6 PS 651 6 PS 651 9 PS 651 9 EG GR HG ZD EG GR HG EG GR HG ZD EG GR HG ZD EG EG EG GR ZD EG GR 20 20 20 20 - - - 10 10 10 10 5 5 5 5 - - 5 5 5 - - 293 293 293 293 342 342 342 401 401 401 401 509 509 509 509 600 700 185 185 185 239 239 $3,510.03 $3,613.47 $5,643.33 $3,723.75 $3,838.80 $3,838.80 $6,436.92 $3,893.27 $4,008.00 $6,459.27 $4,130.38 $5,133.88 $5,285.18 $7,561.06 $5,285.18 $7,261.54 $8,021.61 $3,117.18 $3,153.29 $3,249.57 $5,260.81 $5,260.81 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty PS 653 Wt./ 100 List Price per 100 pcs Type "B" End Cap Use With PS 349 Insert PS 653 EG 100 14 $304.02 PS 654 Type "B" End Cap Use With PS 449 Insert PS 654 PG 50 12 $305.67 PS 655, PS 656 ---- www.power-strut.com ---- Type "A" End Cap Use PS 655 With PS 200 Channel Use PS 656 With PS 300 Channel and PS 349 Concrete Insert U.L. Listed PS 655 HG 100 15 $145.49 PS 655 PG 100 8 $126.85 PS 655 ZD 100 8 $122.32 PS 656 PG 100 7 $135.74 PS 658 Channel Hanger Use With PS 200, PS 210, and PS 300; U.L. Listed PS 658 EG 50 28 $922.01 PS 659 Channel Hanger Use With PS 400 and PS 500; U.L. Listed PS 659 EG 25 28 $1,051.86 PS 660 Four Hole Corner Angle PS 660 EG 25 78 $717.42 PS 660 GR 25 78 $729.96 PS 660 HG 25 79 $998.46 PS 660 ZD 25 78 $746.68 Part No. & Length Fin. Std Qty Wt./ 100 - - - - - 5 5 5 5 - - 20 20 20 275 275 275 275 275 413 413 425 413 540 540 190 190 190 List Price per 100 pcs PS 661 T1 Strut Bracket (Slot Up) PS 661 T1 12 PS 661 T1 12 PS 661 T1 12 PS 661 T1 12 PS 661 T1 12 PS 661 T1 18 PS 661 T1 18 PS 661 T1 18 PS 661 T1 18 PS 661 T1 24 PS 661 T1 24 PS 661 T1 6 PS 661 T1 6 PS 661 T1 6 EG GR HG PG ZD EG GR HG PG EG GR EG GR HG $3,845.76 $3,963.18 $5,937.62 $3,963.18 $3,963.18 $4,792.34 $4,939.01 $7,395.74 $4,938.67 $5,685.34 $5,685.34 $3,111.52 $3,206.53 $4,920.92 PS 661 T2 Strut Bracket (Slot Down) PS 661 T2 18 EG 5 413 $7,621.56 PS 661 T2 18 GR 5 413 $4,938.67 PS 661 T2 6 HG 20 190 $4,920.92 PS 665 Four Hole Double Corner Connector PS 665 EG 25 76 $1,317.99 PS 665 GR 25 76 $1,340.31 PS 665 ZD 25 76 $1,340.31 PS 666 Six Hole Double Corner Connector PS 666 EG 25 115 $1,741.25 PS 666 GR 25 115 $1,739.64 PS 666 ZD 25 115 $1,739.64 PS 667 Eight Hole Double Corner Connector PS 667 EG 10 155 $2,344.45 PS 667 GR 10 155 $2,416.04 PS 667 HG 10 155 $2,684.44 PS 667 ZD 10 155 $2,456.95 PS 668 Six Hole Three Angle Connector PS 668 PS 668 PS 668 PS 668 EG GR HG ZD 10 10 10 10 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 107 107 109 107 $2,148.03 $2,146.04 $2,384.50 $2,146.04 17 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 669 ---- www.power-strut.com ---- List Price per 100 pcs Part No. & Length Fin. Std Qty PS 669 EG 10 239 $3,750.43 PS 669 GR 10 239 $3,810.41 PS 669 HG 10 239 $4,233.70 PS 669 ZD 10 239 $3,810.41 PS 670 Nine Hole Three Angle Clevis Connector PS 670 EG 10 193 $2,507.92 PS 670 GR 10 193 $2,567.09 PS 670 ZD 10 193 $2,610.56 PS 671 Beam Clamp Includes Cup Point Set Screw PS 684 EG 25 94 $1,607.39 PS 684 GR 25 94 $1,656.47 PS 684 HG 25 90 $2,260.29 PS 685 Beam Clamp Includes Cup Point Set Screw PS 685 EG 20 63 $1,575.23 PS 685 GR 20 63 $1,575.23 PS 685 HG 20 63 $1,764.36 PS 686 Strut Suspension Member PS 671 EG 25 69 $1,138.30 PS 671 GR 25 69 $1,127.86 PS 677 Cup Support For Standard Single Strut Use With PS 200, PS 210 PS 677 EG 25 76 $1,184.65 PS 677 GR 25 76 $1,183.55 8 PS 678 Three Hole "U" Support PS 678 GR 10 197 $2,616.96 PS 679 Beam Clamp Order PS 6024 1/2" x 1 1/2" Separately. PS 686 EG 50 26 $442.65 PS 686 GR 50 26 $453.59 PS 686 HG 50 26 $504.04 PS 686 ZD 50 26 $454.43 PS 687 Slotted "U" Support Use With PS 200 and PS 210 PS 687 A EG 10 PS 687 A GR 10 PS 687 B EG 10 PS 687 B GR 10 PS 687 C EG 20 PS 687 C GR 20 PS 689 A EG 10 190 $2,059.53 PS 689 A GR 10 190 $2,224.29 PS 689 B EG 10 242 $3,325.59 PS 689 B GR 10 242 $3,325.59 PS 680 Raceway Splice Plate Use With PS 400; U.L. Listed PS 693 EG 25 PS 693 GR 25 1 60 $2,078.74 PL 1 105 PL 1 86 PL 15 130 $1,598.60 $2,452.74 $1,772.95 $1,860.76 $1,860.76 $2,080.67 $2,080.67 $2,247.60 $2,245.53 Adjustable Double Slotted Corner Connector PS 692 PL 96 96 111 111 129 129 PS 689 "U" Support Use For PS 100 and PS 200 2T3 PS 679 EG 25 120 $1,756.42 PS 679 GR 25 120 $1,786.17 PS 679 ZD 25 120 $1,786.17 18 List Price per 100 pcs PS 684 Twelve Hole Three Angle Clevis Connector Concrete Deck Insert PS 680 1/2 PS 680 1/2 PLATE ONLY PS 680 3/8 PS 680 5/8 Wt./ 100 1 5/8" Offset Zee Connector PS 692 EG 25 106 $2,505.54 PS 692 GR 10 102 $2,503.22 PS 693 114 $1,808.67 114 $1,808.67 PS 694 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Raceway Splice Plate Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 694 EG 50 97 $1,808.67 PS 694 GR 50 97 $1,808.67 Fluorescent Fixture Hanger U.L. Listed PS 702 PS 703 PS 702D PS 703D Std Qty Wt./ 100 List Price per 100 pcs EG EG EG EG 100 100 100 100 Cross Plate PS 712 EG 10 105 $1,794.14 PS 712 GR 10 105 $1,823.16 PS 712 HG 10 105 $2,025.86 PS 712 ZD 10 105 $1,843.64 PS 713 17 $908.66 17 $969.92 20 $1,215.47 18 $1,233.01 PS 704 Slotted Joiner Use With PS 200 S and PS 210 S Order PS 6072 Machine Screws and PS 6108 Square Nut Separately PS 704 GR 25 126 $1,954.30 PS 704 HG 25 126 $1,938.16 PS 708 Single Channel Bracket Support Use With PS 200 and PS 210 PS 708 EG 20 235 $5,642.68 PS 708 GR 20 235 $5,882.33 PS 708 HG 20 235 $6,342.35 PS 709 Cross Plate Connector PS 713 EG 10 105 $2,056.91 PS 713 GR 10 105 $2,119.71 PS 714 Tee Plate PS 714 AL 25 26 $1,427.57 PS 714 EG 25 80 $979.16 PS 714 GR 25 80 $1,019.27 PS 714 HG 25 82 $1,119.68 PS 714 ZD 25 80 $1,037.91 PS 715 Tee Plate 90° Angle PS 715 EG 20 71 $1,391.99 PS 715 GR 20 71 $1,391.99 PS 716 Three Hole Offset Plate Connector PS 709 EG 20 58 $989.62 PS 709 GR 20 58 $988.71 PS 710 "U" Support Use With PS 300 LH & RH Angle Tee Plate Right Hand Illustrated PS 716 L EG 25 80 $1,276.62 PS 716 L GR 25 80 $1,315.60 PS 716 R EG 25 80 $1,276.62 PS 716 R GR 25 80 $1,315.60 PS 718 PS 710 EG 25 84 $1,414.17 PS 710 GR 25 84 $1,414.17 PS 711 Zee Support Use With PS 300 PS 711 PS 711 PS 711 PS 711 Part No. & Length Fin. PS 712 Use With PS 300; U.L. Listed PS 702, PS 703 ---- www.power-strut.com ---- Flat Angle Plate PS 718 EG 50 58 $670.82 PS 718 GR 50 58 $698.61 PS 718 HG 50 58 $805.88 PS 718 ZD 50 58 $698.61 PS 719 EG GR HG ZD 25 25 50 25 53 53 53 53 $1,122.57 $1,085.38 $1,205.93 $1,085.38 Four Hole Corner Plate PS 719 EG PS 719 GR PS 719 HG 20 20 20 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 58 58 75 $1,238.08 $1,265.33 $1,405.87 19 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 720 LH & RH Angle Plate Connector PS 720 L PS 720 L PS 720 L PS 720 R PS 720 R PS 720 R EG GR ZD EG GR ZD 25 25 25 25 25 25 55 55 55 55 55 55 List Price per 100 pcs $1,259.22 $1,282.98 $1,282.98 $1,259.22 $1,282.98 $1,282.98 PS 721 "U" Support Use With PS 100 PS 200 2T3, PS 210 2T3 PS 721 EG 25 104 $2,359.42 PS 721 GR 10 104 $2,359.25 PS 721 HG 25 105 $2,663.32 PS 722 100 Pair Porce-A-Clamp Includes Pipe Strap, Nut and Bolt PS 722 1 EV 10 PS 722 1 SS 10 PS 722 1-1/2 EV 10 PS 722 1-1/2 SS 10 PS 722 1-1/4 EV 10 PS 722 1-1/4 SS 10 PS 722 1-1/8 EV 10 PS 722 1-1/8 SS 10 PS 722 1-3/4 EV 10 PS 722 1-3/4 SS 10 PS 722 1-3/8 EV 10 PS 722 1-3/8 SS 10 PS 722 1-5/8 EV 10 PS 722 1-5/8 SS 10 PS 722 1-7/8 EV 10 PS 722 1-7/8 SS 10 PS 722 1/2 EV 10 PS 722 1/2 SS 10 PS 722 2 EV 10 PS 722 2 SS 10 PS 722 2-1/2 EV 5 PS 722 2-1/2 SS 5 PS 722 2-1/4 EV 5 PS 722 2-1/4 SS 5 PS 722 2-1/8 EV 5 PS 722 2-1/8 SS 5 PS 722 2-3/4 EV 5 PS 722 2-3/4 SS 5 PS 722 2-3/8 EV 5 PS 722 2-3/8 SS 5 PS 722 2-5/8 EV 5 PS 722 2-5/8 SS 5 PS 722 2-7/8 EV 5 PS 722 2-7/8 SS 5 PS 722 3 EV 5 PS 722 3 SS 5 PS 722 3-1/2 EV 5 PS 722 3-1/2 SS 5 PS 722 3-1/4 EV 5 PS 722 3-1/4 SS 5 PS 722 3-1/8 EV 5 PS 722 3-1/8 SS 5 20 37 37 58 58 58 58 37 37 76 76 58 58 58 58 76 76 25 25 76 76 90 90 90 90 76 76 109 109 90 90 90 90 109 109 109 109 130 130 130 130 109 109 $3,286.71 $4,652.24 $4,246.69 $6,066.58 $4,246.69 $6,066.58 $3,286.71 $4,652.24 $5,385.94 $7,694.09 $4,246.69 $6,066.58 $4,246.69 $6,066.58 $5,385.94 $7,694.09 $2,527.50 $3,624.49 $5,385.94 $7,694.09 $6,696.45 $9,566.52 $6,696.45 $9,566.52 $5,385.94 $7,694.09 $7,706.91 $11,009.60 $6,696.45 $9,566.52 $6,696.45 $9,566.52 $7,706.91 $11,009.60 $7,760.94 $11,086.76 $8,756.23 $12,508.77 $8,756.23 $12,508.77 $7,760.94 $11,086.76 ---- www.power-strut.com ---Part No. & Length Fin. Std Qty Wt./ 100 PS 722 3-3/4 PS 722 3-3/4 PS 722 3-3/8 PS 722 3-3/8 PS 722 3-5/8 PS 722 3-5/8 PS 722 3-7/8 PS 722 3/4 PS 722 3/4 PS 722 3/8 PS 722 3/8 PS 722 4 PS 722 4 PS 722 4-1/2 PS 722 4-1/2 PS 722 4-1/4 PS 722 4-1/4 PS 722 4-1/8 PS 722 4-1/8 PS 722 4-3/8 PS 722 4-3/8 PS 722 5/8 PS 722 5/8 PS 722 7/8 PS 722 7/8 PS 722-304 5 5 5 5 5 5 5 10 10 10 10 5 5 5 5 5 5 5 5 5 5 10 10 10 10 50 160 160 130 130 130 130 160 37 37 25 25 160 160 160 160 160 160 160 160 160 160 37 37 37 37 10 EV SS EV SS EV SS SS EV SS EV SS EV SS EV SS EV SS EV SS EV SS EV SS EV SS CC List Price per 100 pcs $10,022.27 $14,316.93 $8,756.23 $12,508.77 $8,756.23 $12,508.77 $14,316.93 $3,286.71 $4,652.24 $2,527.50 $3,577.61 $10,022.04 $14,316.93 $10,204.85 $14,966.20 $10,476.47 $14,966.20 $10,476.47 $14,966.20 $10,476.47 $14,966.20 $2,527.50 $3,577.61 $3,256.56 $4,652.24 $861.92 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 732 List Price per 100 pcs Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 745 Shelf Bracket PS 732 10 PS 732 10 PS 732 12 PS 732 12 PS 732 12 PS 732 14 PS 732 14 PS 732 16 PS 732 16 PS 732 16 PS 732 18 PS 732 18 PS 732 20 PS 732 20 PS 732 8 PS 732 8 PS 732 8 ---- www.power-strut.com ---- Three Hole Corner Angle EG GR EG GR HG EG GR EG GR HG EG GR EG GR EG GR HG 10 10 20 10 10 10 10 1 1 1 1 1 1 1 15 15 15 202 202 258 258 258 292 292 381 381 381 416 416 461 461 168 168 168 $3,797.38 $3,913.38 $3,995.22 $3,995.22 $6,594.56 $6,662.95 $6,662.95 $9,386.49 $9,386.49 $10,550.82 $9,841.17 $9,841.17 $10,177.58 $10,295.41 $3,456.29 $3,666.79 $5,127.73 PS 733 PS 746 Three Hole Corner Joint Connector PS 746 EG 25 72 $1,492.95 PS 746 GR 25 72 $1,459.53 PS 747 Six Hole "U" Support Symmetrical Four Hole Connector PS 733 EG 10 171 $3,655.75 PS 733 GR 10 171 $3,652.37 PS 734 Eight Hole "U" Support PS 747 EG 20 104 $1,780.60 PS 747 GR 20 104 $1,728.80 PS 747 HG 20 104 $1,942.38 PS 748 PS 734 EG 10 209 $4,004.78 PS 734 GR 10 209 $4,001.08 PS 735 Eight Hole "U" Support PS 735 EG 10 257 $4,121.42 PS 735 GR 10 257 $4,187.33 PS 736 Hook Rod Assembly PS 736 10 EG 25 33 PS 736 6 EG 25 24 $3,797.38 $1,072.22 PS 744 Flat Corner Connector PS 744 EG PS 744 GR PS 745 EG 50 58 $497.20 PS 745 GR 50 58 $497.20 PS 745 HG 50 58 $673.49 PS 745 ZD 50 58 $500.91 25 25 69 69 $1,118.89 $1,098.55 Four Hole Corner Joint Connector PS 748 EG 25 105 $1,854.61 PS 748 GR 25 105 $1,854.61 PS 748 HG 25 105 $2,123.55 PS 750 Four Hole Corner Connector PS 750 EG 20 105 $1,420.75 PS 750 GR 20 105 $1,404.97 PS 750 HG 20 105 $1,560.91 PS 752 LH & RH Lh & Rh Four Hole Corner Connector PS 752 L EG 25 PS 752 L GR 25 PS 752 L HG 25 PS 752 R EG 25 PS 752 R GR 25 PS 752 R HG 25 101 101 101 101 101 101 $1,620.39 $1,620.39 $1,855.38 $1,620.39 $1,620.39 $1,855.38 PS 756 Zee Support PS 756 EG 25 70 $1,038.89 PS 756 GR 25 70 $1,008.62 PS 756 ZD 25 70 $1,037.93 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 21 ---- PS2012 • Effective September 3, 2012 --- PS 760-1 Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 763 Two Hole Adjustable Corner Angle PS 763 EG 25 65 $1,015.87 PS 763 GR 25 65 $1,023.45 PS 764 Slotted Adjustment Angle PS 764 EG 25 85 $1,363.70 PS 764 GR 25 85 $1,333.17 PS 781 78 78 78 78 78 78 78 78 79 78 79 79 78 78 78 78 78 78 78 78 78 78 78 78 $1,103.30 $1,103.30 $1,103.30 $1,103.30 $1,103.30 $1,091.04 $1,123.73 $1,103.30 $1,040.53 $1,083.15 $1,190.16 $1,103.21 $1,103.30 $1,091.04 $1,103.30 $1,103.30 $1,103.30 $1,091.04 $1,103.30 $1,103.30 $1,103.30 $1,103.30 $1,103.30 $1,103.30 PS 791 Electrical Box Adapter Plate PS 791 7/8 EG 50 PS 791 7/8 GR 25 22 Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 793 Bus Duct Connection Clevis 760-1 Inside Width 12 9/32"; 760-2 Inside Width 3 9/32"; 760-3 Inside Width 4 1/4" PS 760 1 EG 25 57 $1,025.51 PS 760 1 GR 25 57 $1,025.51 PS 760 2 EG 25 73 $1,167.19 PS 760 2 GR 25 73 $1,156.48 PS 760 2 HG 25 75 $1,285.04 PS 760 3 EG 25 84 $1,426.11 PS 760 3 GR 25 84 $1,413.03 Four Hole Open Angle Connector PS 781 15 DEG EG 25 PS 781 15 DEG GR 25 PS 781 22-1/2 DEG EG 25 PS 781 22-1/2 DEG GR 25 PS 781 30 DEG EG 25 PS 781 30 DEG GR 25 PS 781 37-1/2 DEG EG 25 PS 781 37-1/2 DEG GR 25 PS 781 45 DEG EG 25 PS 781 45 DEG GR 25 PS 781 45 DEG HG 25 PS 781 45 DEG ZD 25 PS 781 52-1/2 DEG EG 25 PS 781 52-1/2 DEG GR 25 PS 781 60 DEG EG 25 PS 781 60 DEG GR 25 PS 781 67-1/2 DEG EG 25 PS 781 67-1/2 DEG GR 25 PS 781 7-1/2 DEG EG 25 PS 781 7-1/2 DEG GR 25 PS 781 75 DEG EG 25 PS 781 75 DEG GR 25 PS 781 82-1/2 DEG EG 25 PS 781 82-1/2 DEG GR 25 ---- www.power-strut.com ---- 32 32 Four Hole Closed Angle Connector PS 793 37-1/2 DEG EG 25 PS 793 37-1/2 DEG GR 25 PS 793 45 DEG EG 25 PS 793 45 DEG GR 25 PS 793 45 DEG HG 25 PS 793 52-1/2 DEG EG 25 PS 793 52-1/2 DEG GR 25 PS 793 52-1/2 DEG HG 25 PS 793 60 DEG EG 25 PS 793 60 DEG GR 25 PS 793 67-1/2 DEG EG 25 PS 793 67-1/2 DEG GR 25 PS 793 75 DEG EG 25 PS 793 75 DEG GR 25 PS 793 82-1/2 DEG EG 25 PS 793 82-1/2 DEG GR 25 113 113 104 104 104 104 104 104 104 104 104 104 104 104 104 104 $1,788.06 $1,808.15 $1,425.54 $1,466.38 $1,629.23 $1,788.06 $1,808.15 $1,788.06 $1,788.06 $1,788.06 $1,788.06 $1,808.15 $1,788.06 $1,808.15 $1,788.06 $1,808.15 PS 803 1/2" Fixture Nipple PS 803 1/2 EG 50 14 $1,689.37 PS 804 Slotted Joiner Use With PS 400S, PS 500S,PS 520S & PS 560S Order PS 6072 Machine Screws and PS 6108 Square Nuts Separately PS 804 EG 25 80 $1,693.92 PS 804 GR 25 80 $1,693.92 PS 805 Raceway Splice Plate Use With PS 100 Channel U.L. Listed PS 805 EG 50 144 $2,137.80 PS 805 GR 50 144 $2,137.80 PS 806 Two Hole Angle With Impressions on Both Legs PS 806 EG 50 40 $462.14 PS 806 GR 50 40 $465.59 PS 806 HG 50 40 $644.29 PS 807 Channel Hanger Use For PS 100 and PS 150; U.L. listed PS 807 EG 25 33 $1,415.42 $1,139.42 $1,098.72 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 808 T1 List Price per 100 pcs 250 250 250 250 350 350 350 450 450 450 450 150 150 150 $3,298.65 $3,336.86 $5,213.29 $3,438.75 $3,977.62 $3,977.62 $4,099.07 $5,246.79 $5,307.56 $7,053.42 $5,469.63 $2,900.56 $2,989.13 $2,989.13 $3,336.86 $5,319.89 $6,060.08 $5,196.19 $5,307.56 $6,912.08 $2,989.13 PS 808 T2 Interlocking Channel Bracket (Slot Down) EG HG HG EG EG HG EG 1 1 1 1 1 1 1 250 250 383 400 450 450 150 EG GR ZD EG GR HG ZD EG GR HG ZD EG GR HG EG GR HG 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 505 $7,330.86 505 $7,330.86 505 $7,554.71 710 $8,543.87 710 $8,718.58 710 $12,883.21 710 $8,984.79 915 $9,958.07 915 $10,251.53 915 $14,516.69 915 $10,564.56 1120 $11,434.27 1120 $11,668.07 1120 $16,749.80 1325 $13,172.55 1325 $13,560.73 1325 $18,759.26 PS 809 Double Channel Bracket PS 809 12 PS 809 12 PS 809 12 PS 809 18 PS 809 18 PS 809 18 PS 809 18 PS 809 24 PS 809 24 PS 809 24 PS 809 24 PS 809 30 PS 809 30 PS 809 30 PS 809 36 PS 809 36 PS 809 36 Part No. & Length Fin. Std Qty Wt./ 100 1 1 25 1 25 1 1 1 1 88 88 120 120 152 152 185 218 218 List Price per 100 pcs PS 812 Interlocking Channel Bracket (Slot Up) PS 808 T1 12 EG 1 PS 808 T1 12 GR 1 PS 808 T1 12 HG 1 PS 808 T1 12 PG 1 PS 808 T1 18 EG 1 PS 808 T1 18 GR 1 PS 808 T1 18 PG 1 PS 808 T1 24 EG 1 PS 808 T1 24 GR 1 PS 808 T1 24 HG 1 PS 808 T1 24 PG 1 PS 808 T1 6 EG 1 PS 808 T1 6 GR 1 PS 808 T1 6 PG 1 PS 808 T2 12 PS 808 T2 12 PS 808 T2 18 PS 808 T2 20 PS 808 T2 24 PS 808 T2 24 PS 808 T2 6 ---- www.power-strut.com ---- PS 810 Diagonal Tube Brace PS 810 36 EG 1 255 $3,891.58 PS 810 42 EG 1 241 $4,325.28 PS 810 48 EG 1 274 $4,620.70 45° Diagonal Tube Brace PS 812 12 PS 812 12 PS 812 18 PS 812 18 PS 812 24 PS 812 24 PS 812 30 PS 812 36 PS 812 36 EG GR EG GR EG GR EG EG GR $2,840.52 $2,927.25 $3,019.65 $3,019.65 $3,405.51 $3,351.90 $3,812.15 $4,218.46 $4,347.26 PS 815 Pair (6" to 18" Pipe) Double Roller Pipe Support Order Nuts and Bolts Separately PS 815 6-18 EG 5 616 $11,021.73 PS 815 6-18 GR 5 294 $11,021.73 PS 815 6-18 HG 5 524 $13,458.10 PS 816 Sets (20" to 30" Pipe) Three Roller Pipe Support Order Nuts and Bolts Separately PS 816 20-30 EG 5 818 $16,557.13 PS 816 20-30 GR 5 818 $16,557.13 PS 816 20-30 HG 5 818 $22,889.65 PS 821 Eight Hole Double Angle Connector PS 821 EG 25 177 $2,420.49 PS 821 GR 25 177 $2,415.84 PS 821 HG 10 177 $2,791.54 PS 821 ZD 25 177 $2,441.43 PS 822 Double 45° Connector PS 822 EG PS 822 GR 25 25 112 $1,558.93 112 $1,576.45 PS 825 RH/LH Pipe Axle Support Specify RH or LH (1 1/2" Max. Pipe) PS 825 L EG 10 225 $3,290.25 PS 825 L GR 10 225 $3,328.36 PS 825 R EG 10 225 $3,290.25 PS 825 R GR 10 225 $3,328.36 PS 826 Double Pipe Axle Support; (1 1/2" Max. Pipe) PS 826 EG 5 360 $8,714.95 PS 826 GR 5 360 $10,710.63 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 23 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 838 RH/LH 6" Thru 30" Shelf Bracket PS 838 10 LH PS 838 10 LH PS 838 10 LH PS 838 10 RH PS 838 10 RH PS 838 10 RH PS 838 12 LH PS 838 12 LH PS 838 12 LH PS 838 12 RH PS 838 12 RH PS 838 12 RH PS 838 14 LH PS 838 14 LH PS 838 14 LH PS 838 14 RH PS 838 14 RH PS 838 14 RH PS 838 16 LH PS 838 16 LH PS 838 16 LH PS 838 16 RH PS 838 16 RH PS 838 16 RH PS 838 18 LH PS 838 18 LH PS 838 18 LH PS 838 18 RH PS 838 18 RH PS 838 18 RH PS 838 20 LH PS 838 20 LH PS 838 20 RH PS 838 20 RH PS 838 22 LH PS 838 22 LH PS 838 22 RH PS 838 22 RH PS 838 24 LH PS 838 24 LH PS 838 24 RH PS 838 24 RH PS 838 26 LH PS 838 26 LH PS 838 26 RH PS 838 26 RH PS 838 28 LH PS 838 28 LH PS 838 28 RH PS 838 28 RH PS 838 30 LH PS 838 30 LH PS 838 30 RH PS 838 30 RH PS 838 6 LH PS 838 6 LH PS 838 6 LH PS 838 6 RH PS 838 6 RH PS 838 6 RH PS 838 8 LH 24 EG GR ZD EG GR ZD EG GR ZD EG GR ZD EG GR ZD EG GR ZD EG GR ZD EG GR ZD EG GR ZD EG GR ZD EG GR EG GR EG GR EG GR EG GR EG GR EG GR EG GR EG GR EG GR EG GR EG GR EG GR ZD EG GR ZD EG 25 25 25 25 25 25 1 1 1 25 1 25 25 25 25 25 25 25 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 25 25 25 25 25 25 25 114 114 114 114 114 114 149 149 149 149 149 149 174 174 174 174 174 174 225 225 225 225 225 225 255 255 255 255 255 255 295 295 295 295 361 361 361 361 396 396 396 396 456 456 456 456 479 479 479 479 544 544 544 544 58 58 58 58 58 58 83 ---- www.power-strut.com ---- List Price per 100 pcs $4,603.96 $4,287.38 $4,108.96 $4,603.96 $4,287.38 $4,108.96 $4,274.13 $4,513.60 $4,274.13 $4,274.13 $4,513.60 $4,274.13 $4,491.64 $4,773.46 $4,491.64 $4,491.64 $4,773.46 $4,491.64 $4,672.86 $5,042.39 $4,672.86 $4,672.86 $5,068.64 $4,672.86 $4,894.78 $5,313.44 $4,894.78 $4,894.78 $5,313.44 $4,894.78 $5,667.16 $6,149.51 $5,667.16 $6,149.51 $5,135.74 $6,581.01 $5,135.74 $6,581.01 $5,322.34 $6,880.10 $5,322.34 $6,880.10 $5,803.56 $7,255.49 $5,803.56 $7,255.49 $6,165.43 $6,165.43 $6,165.43 $6,165.43 $6,551.18 $6,551.18 $6,357.07 $6,551.18 $3,822.13 $3,913.87 $3,822.13 $4,372.12 $3,913.86 $3,822.12 $4,481.30 Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 838 8 LH PS 838 8 LH PS 838 8 RH PS 838 8 RH PS 838 8 RH GR ZD EG GR ZD 25 25 25 25 25 83 $4,086.29 83 $3,947.80 83 $3,947.80 83 $4,086.29 83 $3,947.80 EG GR HG ZD 25 25 25 25 145 145 145 145 PS 854 Flat Connector PS 854 PS 854 PS 854 PS 854 $2,551.09 $2,551.09 $2,834.56 $2,579.75 PS 855 Angular "I" Beam Clamp PS 855 1 - Use With PS 200; PS 855 2-Use With PS 500 PS 855 1 EG 25 107 $1,034.19 PS 855 1 GR 25 107 $1,050.23 PS 855 1 HG 25 107 $1,773.08 PS 855 2 EG 25 98 $1,274.12 PS 855 2 GR 25 98 $1,313.03 PS 858 Heavy Duty Suspension Rod Beam Clamps Includes Set Screw (Safety Anchor Strap PS 871 To Be Ordered Separately According To Length Required) PS 858 1/2 PS 858 1/2 PS 858 1/4 PS 858 3/4 PS 858 3/8 PS 858 5/8 PS 858 5/8 EG HG HG EG EG EG HG 10 10 10 10 10 10 10 97 97 93 150 95 150 150 $2,316.95 $4,532.30 $3,625.36 $4,735.52 $2,097.69 $4,903.19 $10,787.28 PS 865 Wide Throat Heavy Duty Beam Clamp Includes Set Screw (Safety Anchor Strap PS 871 To Be Ordered Separately According To Length Required) PS 865 1/2 EG 10 195 $4,560.96 PS 865 1/2 HG 10 195 $6,874.52 PS 865 1/4 HG 10 151 $5,483.02 PS 865 3/8 EG 10 151 $3,738.14 PS 865 3/8 HG 10 151 $5,978.08 PS 865 5/8 EG 10 225 $7,249.34 PS 865 5/8 HG 10 225 $14,660.54 PS 871 Safety Anchor Strap (For Heavy Duty Beam Clamps) PS 871 10 PS 871 12 PS 871 15 PS 871 6 PS 871 8 PS 871 9 EG EG EG EG EG EG 1 1 1 100 1 1 26 35 59 16 24 35 $937.19 $562.88 $647.12 $542.69 $582.25 $560.17 AL EG GR HG ZD 25 25 25 25 25 75 75 75 75 75 $1,082.81 $639.14 $653.51 $894.17 $665.61 PS 888 Four Hole Splice Plate PS 888 PS 888 PS 888 PS 888 PS 888 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 889 List Price per 100 pcs Five Hole Splice Plate PS 889 EG 50 105 $1,066.13 PS 889 GR 50 105 $1,035.12 PS 889 HG 50 105 $1,163.06 PS 889 ZD 50 105 $1,046.75 PS 901, PS 902 ---- www.power-strut.com ---- Type "A" End Cap Use With PS 100, PS 400; U.L. Listed and PS 449 Series Inserts U.L. Listed PS 901 PG 100 6 $146.46 PS 902 PG 100 19 $826.91 PS 907 "I" Beam Clamp Includes Cup Point Set Screw PS 907 EG 50 26 $1,196.54 PS 907 GR 50 26 $1,242.57 PS 907 HG 50 26 $1,370.40 PS 913 Ten Hole Two Angle Clevis Connector PS 913 EG 10 202 $4,142.58 PS 913 GR 10 202 $4,269.09 PS 913 HG 10 202 $4,743.41 PS 913 ZD 10 202 $4,337.36 PS 916 Beam Clamp For Beams 7/8" To 2" Thick PS 916 EG 25 60 $1,453.31 PS 916 GR 25 60 $1,497.68 PS 916 HG 25 60 $2,134.72 PS 921 One Hole Angle PS 921A 3-7/8 EG 25 60 $832.24 PS 921A 3-7/8 GR 25 60 $813.61 PS 921A 3-7/8 HG 25 60 $931.70 PS 921B 5-7/8 EG 25 83 $1,042.91 PS 921B 5-7/8 GR 25 83 $1,042.91 PS 921C 7 7/8 GR 25 105 $1,253.35 PS 921C 7-7/8 EG 25 105 $1,253.35 PS 921D 9-7/8 EG 25 130 $1,475.53 PS 921D 9-7/8 GR 25 130 $1,520.58 Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 922 LH & RH Two Hole Single Corner Angle Connection PS 922 LH PS 922 LH PS 922 LH PS 922 LH PS 922 RH PS 922 RH PS 922 RH PS 922 RH EG GR HG ZD EG GR HG ZD 20 20 20 20 20 20 20 20 60 60 64 60 60 60 64 60 $1,633.10 $1,660.75 $1,843.64 $1,659.22 $1,633.10 $1,660.75 $1,843.64 $1,659.22 Five Hole Two Angle Connector PS 92 3/8 EG 50 PS 92 3/8 PL 50 PS 92 3/8 ZD 50 PS 923 EG 20 PS 923 GR 20 PS 923 HG 20 PS 923 ZD 20 30 30 30 93 93 93 93 $840.42 $1,044.74 $840.42 $2,124.60 $2,188.36 $2,422.63 $2,186.34 PS 923 PS 925 Symmetrical 3 Hole Joint Connector PS 925 EG 25 70 $1,376.35 PS 925 GR 25 70 $1,336.31 PS 926 Strut Brace PS 926 12 PS 926 12 PS 926 12 PS 926 18 PS 926 18 PS 926 18 PS 926 18 PS 926 24 PS 926 24 PS 926 24 EG GR ZD EG GR HG ZD EG GR HG 15 15 15 1 1 1 1 1 1 1 160 160 160 218 218 218 218 280 280 280 $1,741.06 $1,757.41 $1,790.89 $1,824.96 $1,862.28 $3,008.53 $1,897.76 $2,365.55 $2,392.95 $3,462.62 PS 927 Five Hole Corner Connector PS 927 EG 10 198 $2,593.79 PS 927 GR 10 198 $2,672.99 PS 928 Zee Support; Use For PS 500 PS 928 PS 928 PS 928 EG GR ZD 50 50 50 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 47 47 47 $729.75 $735.53 $735.53 25 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 929 List Price per 100 pcs PS 929 EG 25 65 $1,059.75 PS 929 GR 25 65 $1,041.42 PS 929 HG 25 65 $1,157.16 PS 929 ZD 25 65 $1,041.42 PS 930 Std Qty Wt./ 100 List Price per 100 pcs "I" Beam Clamp; Includes Set Screw PS 998 EG 25 60 $1,239.79 PS 998 HG 25 65 $2,038.19 PS 1000 Type "A" End Cap Use With PS 500 PS 930 PG 200 4 $143.54 PS 942 Raceway Splice Plate Use With PS 500, PS 520; U.L. Listed PS 942 EG 50 85 $1,809.01 PS 942 GR 50 85 $1,809.01 PS 943 Eight Hole Double Gusseted Corner Connector PS 94 3/4 EG 25 86 $2,538.59 PS 94 3/4 PL 25 86 $2,378.15 PS 943 EG 10 217 $5,279.37 PS 943 GR 10 217 $5,403.92 PS 943 HG 10 217 $7,600.84 PS 945 Double Wing Gusseted Connector PS 945 EG 10 257 $6,816.55 PS 945 GR 10 285 $7,088.95 PS 945 HG 10 257 $8,201.81 PS 978 "U" Support Use With PS 400 PS 978 EG 20 71 $1,193.02 PS 978 GR 20 71 $1,153.50 PS 993 26 Part No. & Length Fin. PS 998 "U" Support Use With PS 500 Inside Clevis PS 993 4 PS 993 4 PS 993 5 PS 993 5 PS 993 6 PS 993 6 PS 993 7 PS 993 7 PS 993 8 PS 993 8 ---- www.power-strut.com ---- EG GR EG GR EG GR EG GR EG GR 25 25 25 25 25 25 25 25 20 20 78 78 89 89 101 101 112 112 124 124 $1,091.89 $1,090.88 $1,156.52 $1,190.13 $1,311.49 $1,310.28 $1,429.34 $1,429.34 $1,503.18 $1,503.18 Conduit Clamps PS 1000 1 1/2 PS 1000 1 1/2 PS 1000 1 1/2 PS 1000 1 1/2 PS 1000 1 1/2 PS 1000 1 1/4 PS 1000 1 1/4 PS 1000 1 1/4 PS 1000 1 PS 1000 1 PS 1000 1 PS 1000 1 PS 1000 1 PS 1000 1/2 PS 1000 1/2 PS 1000 1/2 PS 1000 1/2 PS 1000 1/2 PS 1000 2 PS 1000 2 PS 1000 2 PS 1000 2 PS 1000 3/4 PS 1000 3/4 PS 1000 3/4 PS 1000 3/4 PS 1000 3/4 AL EG HG SS ZD AL EG ZD AL EG HG SS ZD AL EG HG SS ZD AL EG HG ZD AL EG HG SS ZD 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 100 100 100 100 100 10 27 27 27 27 6 16 16 5 14 14 14 14 4 9 9 9 9 12 30 33 33 5 10 10 10 10 $816.70 $311.36 $662.50 $1,004.18 $328.39 $529.70 $253.18 $267.02 $508.46 $226.10 $425.81 $637.10 $238.46 $533.37 $189.46 $396.90 $506.31 $199.82 $821.78 $328.56 $759.66 $346.53 $544.33 $193.66 $392.59 $552.66 $205.28 14 14 27 27 16 16 9 9 30 30 10 10 $236.59 $250.73 $331.33 $342.98 $272.12 $281.69 $204.55 $211.74 $353.04 $365.45 $204.85 $213.45 PS 1000 AS Pre-Assembled EMT Conduit Clamps PS 1000 AS 1 EG PS 1000 AS 1 ZD PS 1000 AS 1-1/2 EG PS 1000 AS 1-1/2 ZD PS 1000 AS 1-1/4 EG PS 1000 AS 1-1/4 ZD PS 1000 AS 1/2 EG PS 1000 AS 1/2 ZD PS 1000 AS 2 EG PS 1000 AS 2 ZD PS 1000 AS 3/4 EG PS 1000 AS 3/4 ZD 100 100 50 50 100 100 100 100 50 50 100 100 PS 1004 Slotted Joiner Use With PS 150 S; Order PS 6072 Machine Screws and PS 6108 Square Nut Separately PS 1004 EG 25 140 $2,211.85 PS 1004 GR 25 140 $2,211.85 PS 1004 HG 25 140 $2,328.27 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- PS 1100, 1116, 1117 Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs Rigid Steel Conduit Clamps; Also For IMC and GRC PS 1100 1 1/2 EG PS 1100 1 1/2 HG PS 1100 1 1/2 ZD PS 1100 1 1/4 EG PS 1100 1 1/4 ZD PS 1100 1 AL PS 1100 1 EG PS 1100 1 HG PS 1100 1 ZD PS 1100 1/2 EG PS 1100 1/2 HG PS 1100 1/2 ZD PS 1100 10 AS EG PS 1100 10 AS ZD PS 1100 10 EG PS 1100 10 HG PS 1100 10 ZD PS 1100 12 AS EG PS 1100 12 AS ZD PS 1100 12 EG PS 1100 12 ZD PS 1100 2 1/2 EG PS 1100 2 1/2 HG PS 1100 2 1/2 ZD PS 1100 2 EG PS 1100 2 HG PS 1100 2 ZD PS 1100 3 1/2 EG PS 1100 3 1/2 HG PS 1100 3 1/2 ZD PS 1100 3 EG PS 1100 3 HG PS 1100 3 ZD PS 1100 3/4 EG PS 1100 3/4 HG PS 1100 3/4 ZD PS 1100 3/8 EG PS 1100 3/8 HG PS 1100 3/8 ZD PS 1100 4 AL PS 1100 4 EG PS 1100 4 HG PS 1100 4 ZD PS 1100 5 EG PS 1116 1 1/4 AL PS 1116 1 AL PS 1116 1/2 AL PS 1116 2 1/2 AL PS 1116 2 AL PS 1116 3 1/2 AL PS 1116 3 AL PS 1116 3/4 AL PS 1116 4 AL PS 1116 5 AL PS 1116 6 AL PS 1117 1 1/2 AL PS 1117 1 1/4 AL PS 1117 1 AL PS 1117 1/2 AL PS 1117 10 AL PS 1117 2 1/2 AL 100 50 100 100 100 100 100 100 100 100 100 100 10 10 10 10 10 10 10 10 10 50 50 50 50 50 50 25 25 25 50 50 50 100 100 100 100 100 100 25 25 25 25 25 100 100 100 50 50 50 50 100 25 25 25 50 100 100 100 25 50 28 28 28 18 18 5 15 15 15 10 10 10 143 143 143 143 143 174 174 174 174 39 39 39 33 33 33 55 55 55 44 44 44 13 13 13 9 9 9 21 61 61 61 73 5 4 3 11 9 14 12 4 16 20 25 11 7 7 5 55 16 ---- www.power-strut.com ---- $304.06 $564.44 $328.39 $253.18 $262.08 $335.96 $220.80 $389.45 $234.05 $189.46 $365.11 $199.82 $2,551.47 $2,662.40 $2,190.01 $7,082.71 $2,089.26 $3,259.32 $3,401.03 $2,712.01 $2,587.31 $372.52 $658.23 $385.56 $320.86 $619.59 $346.13 $475.25 $965.39 $490.60 $407.20 $717.45 $419.53 $193.66 $375.48 $205.28 $243.93 $369.38 $248.54 $789.41 $531.75 $1,007.85 $548.92 $827.32 $485.90 $466.52 $431.48 $893.63 $827.15 $1,551.32 $951.50 $451.57 $1,533.03 $1,682.28 $2,133.05 $609.92 $517.70 $402.30 $460.23 $4,072.68 $721.92 Part No. & Length Fin. Std Qty Wt./ 100 PS 1117 2 PS 1117 3 1/2 PS 1117 3 PS 1117 3/4 PS 1117 4 PS 1100 5 PS 1100 5 PS 1100 6 PS 1100 6 PS 1100 6 PS 1100 8 AS PS 1100 8 AS PS 1100 8 PS 1100 8 PS 1100 8 50 50 50 100 25 25 25 25 25 25 25 25 25 25 25 28 20 18 6 28 73 73 98 98 98 123 123 123 123 123 AL AL AL AL AL HG ZD EG HG ZD EG ZD EG HG ZD List Price per 100 pcs $650.91 $967.31 $778.28 $387.75 $1,003.13 $1,088.76 $827.32 $975.38 $1,521.82 $1,017.78 $2,418.14 $2,425.77 $1,704.34 $1,626.07 $1,570.95 PS 1100 AS Pre-Assembled Rigid Steel Conduit And Pipe Clamps Also For IMC and GRC PS 1100 AS 1 1/2 EG 50 PS 1100 AS 1 1/2 ZD 50 PS 1100 AS 1 1/4 EG 100 PS 1100 AS 1 1/4 ZD 100 PS 1100 AS 1 EG 100 PS 1100 AS 1 ZD 100 PS 1100 AS 1/2 EG 100 PS 1100 AS 1/2 ZD 100 PS 1100 AS 2 1/2 EG 50 PS 1100 AS 2 1/2 ZD 50 PS 1100 AS 2 EG 50 PS 1100 AS 2 ZD 50 PS 1100 AS 3 1/2 EG 25 PS 1100 AS 3 1/2 ZD 25 PS 1100 AS 3 EG 50 PS 1100 AS 3 ZD 50 PS 1100 AS 3/4 EG 100 PS 1100 AS 3/4 ZD 100 PS 1100 AS 3/8 EG 100 PS 1100 AS 3/8 ZD 100 PS 1100 AS 4 EG 25 PS 1100 AS 4 ZD 25 PS 1100 AS 5 EG 25 PS 1100 AS 5 ZD 25 PS 1100 AS 6 ZD 25 28 $329.59 28 $341.18 18 $271.96 18 $281.52 15 $240.53 15 $248.99 10 $204.06 10 $211.24 39 $385.95 39 $409.10 33 $347.83 33 $360.06 55 $510.95 55 $527.45 44 $423.10 44 $448.48 13 $204.85 13 $217.14 9 $261.74 9 $266.68 61 $551.68 61 $582.02 73 $902.30 73 $902.24 98 $1,163.06 PS 1154 Splice Connection Use With PS 349 Continuous Insert PS 1154 EG 50 PS 1154B PG 50 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 10 8 $493.64 $486.83 27 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty PS 1200 O.D. Tubing Clamp PS 1200 1 1/2 AS EG 100 PS 1200 1 1/2 AS ZD 100 PS 1200 1 1/2 CC 100 PS 1200 1 1/2 EG 100 PS 1200 1 1/2 ZD 100 PS 1200 1 1/4 AS EG 100 PS 1200 1 1/4 AS ZD 100 PS 1200 1 1/4 EG 100 PS 1200 1 1/4 ZD 100 PS 1200 1 1/8 AS EG 100 PS 1200 1 1/8 CC 100 PS 1200 1 1/8 EG 100 PS 1200 1 3/4 AS EG 50 PS 1200 1 3/4 AS ZD 50 PS 1200 1 3/4 EG 50 PS 1200 1 3/4 ZD 50 PS 1200 1 3/8 AS CPLT 100 PS 1200 1 3/8 AS EG 100 PS 1200 1 3/8 AS ZD 100 PS 1200 1 3/8 CC 100 PS 1200 1 3/8 EG 100 PS 1200 1 3/8 ZD 100 PS 1200 1 5/8 AS EG 100 PS 1200 1 5/8 AS ZD 100 PS 1200 1 5/8 CC 100 PS 1200 1 5/8 EG 100 PS 1200 1 5/8 ZD 100 PS 1200 1 7/8 AS EG 50 PS 1200 1 7/8 AS ZD 50 PS 1200 1 7/8 EG 50 PS 1200 1 7/8 HG 50 PS 1200 1 7/8 ZD 50 PS 1200 1 AS EG 100 PS 1200 1 AS ZD 100 PS 1200 1 CC 100 PS 1200 1 EG 100 PS 1200 1 ZD 100 PS 1200 1-1/8 AS CC 100 PS 1200 1-1/8 AS ZD 100 PS 1200 1-5/8 AS CC 50 PS 1200 1/2 AS CC 100 PS 1200 1/2 AS EG 100 PS 1200 1/2 AS ZD 100 PS 1200 1/2 CC 100 PS 1200 1/2 EG 100 PS 1200 1/2 ZD 100 PS 1200 1/4 AS CC 100 PS 1200 1/4 AS EG 100 PS 1200 1/4 AS ZD 100 PS 1200 1/4 CC 100 PS 1200 1/4 EG 100 PS 1200 1/4 ZD 100 PS 1200 10 1/8 EG 25 PS 1200 12 5/8 EG 25 PS 1200 2 1/2 AS EG 50 PS 1200 2 1/2 AS ZD 50 PS 1200 2 1/2 CC 50 PS 1200 2 1/2 EG 50 PS 1200 2 1/2 HG 50 PS 1200 2 1/2 ZD 50 PS 1200 2 1/4 AS EG 50 28 Wt./ 100 List Price per 100 pcs 16 $418.14 16 $418.14 12 $288.26 16 $383.60 16 $390.83 14 $396.33 14 $396.33 14 $363.48 14 $370.34 14 $383.43 14 $441.13 14 $358.09 27 $554.43 27 $554.43 27 $518.31 27 $518.31 15 $558.61 15 $399.95 15 $407.49 15 $512.53 15 $380.76 15 $380.76 17 $418.65 17 $426.55 17 $535.17 17 $398.56 17 $398.56 28 $544.16 28 $554.43 28 $518.31 28 $603.88 28 $518.31 13 $361.93 13 $361.93 13 $427.81 13 $348.77 13 $355.35 14 $480.93 14 $390.66 17 $583.33 8 $452.37 8 $300.23 8 $305.89 8 $358.60 8 $286.52 8 $291.92 7 $308.81 7 $298.74 7 $298.74 7 $288.66 7 $274.10 7 $279.27 144 $9,018.33 170 $10,843.14 34 $622.94 34 $622.94 34 $617.56 34 $571.29 34 $790.48 34 $582.07 32 $599.82 ---- www.power-strut.com ---Part No. & Length Fin. Std Qty Wt./ 100 PS 1200 2 1/4 EG PS 1200 2 1/4 ZD PS 1200 2 1/8 AS EG PS 1200 2 1/8 AS ZD PS 1200 2 1/8 CC PS 1200 2 1/8 EG PS 1200 2 1/8 ZD PS 1200 2 3/4 AS EG PS 1200 2 3/4 EG PS 1200 2 3/4 ZD PS 1200 2 3/8 AL PS 1200 2 3/8 AS EG PS 1200 2 3/8 AS ZD PS 1200 2 3/8 EG PS 1200 2 3/8 HG PS 1200 2 3/8 ZD PS 1200 2 5/8 AS EG PS 1200 2 5/8 AS ZD PS 1200 2 5/8 CC PS 1200 2 5/8 EG PS 1200 2 5/8 ZD PS 1200 2 7/8 AS EG PS 1200 2 7/8 EG PS 1200 2 7/8 ZD PS 1200 2 AS EG PS 1200 2 AS ZD PS 1200 2 CC PS 1200 2 EG PS 1200 2 HG PS 1200 2 ZD PS 1200 2-1/8 AS CC PS 1200 2-5/8 AS CC PS 1200 3 1/2 AS EG PS 1200 3 1/2 EG PS 1200 3 1/2 HG PS 1200 3 1/2 ZD PS 1200 3 1/4 AS EG PS 1200 3 1/4 EG PS 1200 3 1/4 ZD PS 1200 3 1/8 AS EG PS 1200 3 1/8 AS ZD PS 1200 3 1/8 CC PS 1200 3 1/8 EG PS 1200 3 1/8 ZD PS 1200 3 3/4 AS EG PS 1200 3 3/4 EG PS 1200 3 3/4 HG PS 1200 3 3/4 ZD PS 1200 3 3/8 AS EG PS 1200 3 3/8 EG PS 1200 3 3/8 ZD PS 1200 3 5/8 AS EG PS 1200 3 5/8 AS ZD PS 1200 3 5/8 CC PS 1200 3 5/8 EG PS 1200 3 5/8 ZD PS 1200 3 7/8 AS EG PS 1200 3 7/8 EG PS 1200 3 7/8 ZD PS 1200 3 AS EG PS 1200 3 AS ZD PS 1200 3 CC 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 50 25 50 50 50 25 25 25 25 25 25 25 25 50 50 50 32 $550.28 32 $560.67 29 $554.38 29 $564.84 31 $726.07 31 $528.21 31 $528.21 37 $655.34 37 $472.52 37 $472.52 11 $680.98 33 $599.82 33 $599.82 33 $550.28 33 $716.13 33 $560.67 35 $611.41 35 $622.94 35 $809.83 35 $571.29 35 $582.07 39 $653.51 39 $601.13 39 $612.47 29 $554.95 29 $565.42 29 $537.77 29 $518.43 0 $633.53 29 $528.21 31 $780.75 35 $882.81 44 $558.43 44 $682.92 44 $889.05 44 $695.81 42 $728.61 42 $668.15 42 $680.76 41 $692.25 41 $705.31 41 $881.33 41 $646.97 41 $659.18 53 $859.34 53 $784.54 58 $1,125.68 53 $803.13 43 $744.52 43 $682.92 43 $695.81 51 $779.67 51 $779.67 51 $1,115.04 51 $711.69 51 $728.61 54 $976.00 54 $890.84 54 $911.95 39 $689.17 39 $689.17 39 $673.83 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. List Price per 100 pcs ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 1200 [CONTINUED] O.D. Tubing Clamp PS 1200 3 EG PS 1200 3 HG PS 1200 3 ZD PS 1200 3-1/8 AS CC PS 1200 3/4 AS CC PS 1200 3/4 AS EG PS 1200 3/4 AS ZD PS 1200 3/4 CC PS 1200 3/4 EG PS 1200 3/4 ZD PS 1200 3/8 AS CC PS 1200 3/8 AS EG PS 1200 3/8 AS ZD PS 1200 3/8 CC PS 1200 3/8 EG PS 1200 3/8 ZD PS 1200 4 1/2 AS EG PS 1200 4 1/2 EG PS 1200 4 1/2 HG PS 1200 4 1/2 ZD PS 1200 4 1/4 AS EG PS 1200 4 1/4 EG PS 1200 4 1/4 ZD PS 1200 4 1/8 AS CC PS 1200 4 1/8 AS EG PS 1200 4 1/8 AS ZD PS 1200 4 1/8 CC PS 1200 4 1/8 EG PS 1200 4 1/8 ZD PS 1200 4 3/4 AS EG PS 1200 4 3/4 EG PS 1200 4 3/4 ZD PS 1200 4 3/8 AS EG PS 1200 4 3/8 CC PS 1200 4 3/8 EG PS 1200 4 3/8 ZD PS 1200 4 5/8 AS EG PS 1200 4 5/8 EG PS 1200 4 5/8 ZD PS 1200 4 7/8 AS EG PS 1200 4 7/8 EG PS 1200 4 7/8 ZD PS 1200 4 AS EG PS 1200 4 AS ZD PS 1200 4 EG PS 1200 4 ZD PS 1200 5 1/2 AS EG PS 1200 5 1/2 EG PS 1200 5 1/2 ZD PS 1200 5 1/4 AS EG PS 1200 5 1/4 EG PS 1200 5 1/4 ZD PS 1200 5 1/8 AS EG PS 1200 5 1/8 AS ZD PS 1200 5 1/8 CC PS 1200 5 1/8 EG PS 1200 5 1/8 ZD PS 1200 5 3/4 AS EG PS 1200 5 3/4 EG PS 1200 5 3/4 ZD PS 1200 5 3/8 AS EG 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 39 39 39 41 11 11 11 11 11 11 7 7 7 7 7 7 61 61 61 61 59 59 59 57 57 57 57 57 57 64 64 64 60 60 60 60 62 62 62 65 65 65 55 55 55 55 72 72 72 70 70 70 68 68 68 68 68 87 87 87 71 List Price per 100 pcs $632.03 $841.60 $643.95 $965.24 $403.08 $327.30 $327.30 $376.93 $300.56 $306.23 $382.99 $301.29 $306.98 $349.44 $281.69 $287.00 $1,134.68 $1,060.43 $462.84 $1,085.56 $1,196.20 $1,092.30 $1,118.18 $1,196.95 $1,055.06 $1,080.06 $1,118.53 $985.84 $1,009.20 $797.47 $1,101.97 $745.26 $1,161.57 $2,635.44 $1,060.43 $1,085.56 $699.64 $1,079.38 $1,104.96 $1,229.69 $1,122.49 $1,149.09 $975.83 $975.83 $890.84 $911.95 $1,351.49 $1,233.82 $1,263.06 $1,363.97 $1,244.56 $1,274.05 $1,272.22 $1,272.22 $2,739.51 $1,161.35 $1,188.87 $1,652.06 $1,508.08 $1,543.82 $1,338.67 ---- www.power-strut.com ---Part No. & Length Fin. Std Qty Wt./ 100 PS 1200 5 3/8 EG PS 1200 5 3/8 ZD PS 1200 5 5/8 AS EG PS 1200 5 5/8 EG PS 1200 5 5/8 ZD PS 1200 5 7/8 AS EG PS 1200 5 7/8 EG PS 1200 5 7/8 ZD PS 1200 5 AS EG PS 1200 5 AS ZD PS 1200 5 EG PS 1200 5 HG PS 1200 5 ZD PS 1200 5/8 AS CC PS 1200 5/8 AS EG PS 1200 5/8 AS ZD PS 1200 5/8 CC PS 1200 5/8 EG PS 1200 6 1/2 AS EG PS 1200 6 1/2 EG PS 1200 6 1/2 ZD PS 1200 6 1/4 EG PS 1200 6 1/4 ZD PS 1200 6 1/8 AS EG PS 1200 6 1/8 AS ZD PS 1200 6 1/8 CC PS 1200 6 1/8 EG PS 1200 6 1/8 ZD PS 1200 6 3/4 EG PS 1200 6 3/4 ZD PS 1200 6 3/8 CC PS 1200 6 3/8 EG PS 1200 6 3/8 ZD PS 1200 6 5/8 EG PS 1200 6 5/8 ZD PS 1200 6 7/8 EG PS 1200 6 7/8 ZD PS 1200 6 AS EG PS 1200 6 AS ZD PS 1200 6 EG PS 1200 6 ZD PS 1200 7 1/2 EG PS 1200 7 1/2 ZD PS 1200 7 1/4 EG PS 1200 7 1/4 ZD PS 1200 7 1/8 EG PS 1200 7 1/8 ZD PS 1200 7 3/4 EG PS 1200 7 3/4 ZD PS 1200 7 3/8 EG PS 1200 7 3/8 ZD PS 1200 7 5/8 EG PS 1200 7 5/8 ZD PS 1200 7 7/8 EG PS 1200 7 7/8 ZD PS 1200 7 EG PS 1200 7 ZD PS 1200 7/8 AS CC PS 1200 7/8 AS EG PS 1200 7/8 AS ZD PS 1200 7/8 CC PS 1200 7/8 EG PS 1200 8 1/2 EG 25 25 25 25 25 25 25 25 25 25 25 25 25 100 100 100 100 100 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 100 100 100 100 100 25 71 71 85 85 85 88 88 88 67 67 67 79 67 8 8 8 8 8 98 98 98 93 93 91 91 91 91 91 100 100 95 95 95 99 99 101 101 90 90 90 90 109 109 106 106 104 104 112 112 107 107 110 110 113 113 102 102 10 12 12 10 12 121 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. List Price per 100 pcs $1,221.97 $1,250.92 $1,613.77 $1,473.19 $1,508.10 $1,676.04 $1,530.11 $1,566.37 $1,229.69 $1,229.69 $1,122.49 $1,327.91 $1,149.09 $389.72 $310.06 $315.91 $364.38 $289.94 $2,007.01 $1,797.54 $1,875.70 $1,614.00 $1,614.00 $1,692.19 $1,692.19 $3,083.98 $1,515.48 $1,581.37 $1,948.96 $1,948.96 $3,163.88 $1,557.99 $1,625.73 $1,837.53 $1,917.48 $1,891.62 $1,973.86 $1,675.53 $1,675.53 $1,500.56 $1,565.80 $2,021.02 $2,108.89 $2,058.69 $2,058.69 $1,949.05 $2,033.79 $2,153.77 $2,153.71 $2,021.02 $2,108.89 $2,059.81 $2,149.36 $2,219.14 $2,219.14 $1,891.62 $1,973.86 $424.05 $334.33 $340.64 $396.35 $318.14 $2,309.78 29 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 1200 [CONTINUED] O.D. Tubing Clamp PS 1200 8 1/2 ZD PS 1200 8 1/4 EG PS 1200 8 1/4 ZD PS 1200 8 1/8 AS EG PS 1200 8 1/8 EG PS 1200 8 1/8 ZD PS 1200 8 3/4 EG PS 1200 8 3/8 EG PS 1200 8 3/8 ZD PS 1200 8 5/8 EG PS 1200 8 5/8 ZD PS 1200 8 7/8 EG PS 1200 8 EG PS 1200 8 ZD PS 1200 9 1/2 EG PS 1200 9 1/4 EG PS 1200 9 1/8 EG PS 1200 9 3/8 EG PS 1200 9 5/8 EG PS 1200 9 EG List Price per 100 pcs Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 1450 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 10 25 25 25 25 121 118 118 117 117 117 125 120 120 123 123 126 115 115 137 132 130 135 139 128 $2,410.15 $2,310.38 $2,310.32 $2,531.61 $2,366.02 $2,366.02 $1,761.56 $2,380.33 $2,380.33 $2,410.20 $2,410.15 $2,462.35 $2,126.67 $2,219.14 $4,644.85 $9,658.85 $6,351.18 $4,393.39 $3,959.87 $2,439.46 Universal Pipe Clamp For EMT, IMC, GRC, Pipe, or O.D. Tube PS 1300 1 1/2 EG 100 PS 1300 1 1/2 HG 100 PS 1300 1 1/4 EG 100 PS 1300 1 1/4 HG 100 PS 1300 1 1/4 ZD 100 PS 1300 1 EG 100 PS 1300 1 HG 100 PS 1300 1 ZD 100 PS 1300 1-1/2 ZD 100 PS 1300 1/2 EG 100 PS 1300 1/2 HG 100 PS 1300 1/2 ZD 100 PS 1300 2 EG 100 PS 1300 2 HG 100 PS 1300 2 ZD 100 PS 1300 3/4 EG 100 PS 1300 3/4 HG 100 PS 1300 3/4 ZD 100 PS 1300 AS 1 1/2 EG 100 PS 1300 AS 1 1/2 ZD 100 PS 1300 AS 1 1/4 EG 100 PS 1300 AS 1 1/4 ZD 100 PS 1300 AS 1 EG 100 PS 1300 AS 1 ZD 100 PS 1300 AS 1/2 EG 100 PS 1300 AS 1/2 ZD 100 PS 1300 AS 2 EG 100 PS 1300 AS 2 ZD 100 PS 1300 AS 3/4 EG 100 PS 1300 AS 3/4 ZD 100 One Hole Clamp For O.D. Tubing Use With 1 5/8 Wide Channel PS 1450 1 PS 1450 1/2 PS 1450 1/2 PS 1450 1/4 PS 1450 3/4 PS 1450 3/4 PS 1450 3/8 PS 1450 3/8 PS 1450 5/8 PS 1450 7/8 EG EG HG EG EG HG EG HG EG EG 50 100 100 100 100 100 100 100 100 50 7 4 4 3 6 6 4 4 5 6 $400.34 $291.24 $344.70 $270.90 $362.59 $388.83 $274.10 $342.30 $352.94 $387.92 PS 1500 Porcelain Cable Rack Insulator Use With All 1 5/8 Wide Channel PS 1500 3 PL 10 74 $1,467.46 PS 1500 4 1/2 PL 10 103 $1,610.85 PS 1901 PS 1300 30 ---- www.power-strut.com ---- 30 30 19 19 19 17 17 17 20 11 11 11 25 35 25 15 15 15 30 30 19 19 17 17 11 11 30 30 15 15 $311.36 $633.49 $247.25 $631.19 $262.08 $226.10 $285.45 $234.05 $322.30 $185.02 $474.22 $196.12 $328.56 $607.81 $340.11 $193.66 $281.86 $205.28 $329.76 $341.35 $269.19 $278.60 $234.90 $248.99 $203.85 $211.01 $342.59 $363.09 $204.85 $217.14 (1"-8" Pipe) Pipe Roller Support PS 1901 1-8 EG 10 140 $5,391.66 PS 1901 1-8 GR 10 140 $5,391.66 PS 1902 Pipe Roller Support PS 1902 1-2 EG PS 1902 1-2 GR PS 1902 10 EG PS 1902 10 GR PS 1902 12 EG PS 1902 12 GR PS 1902 2 1/2-3 1/2 EG PS 1902 2 1/2-3 1/2 GR PS 1902 2 1/2-3 1/2 HG PS 1902 4-6 EG PS 1902 4-6 GR PS 1902 8 EG PS 1902 8 GR PS 1902 8 HG 10 10 10 10 10 10 10 10 10 10 10 10 10 10 309 309 344 344 350 350 315 315 315 325 325 338 338 338 $8,269.92 $8,806.43 $8,561.73 $8,774.72 $8,623.26 $8,836.48 $6,901.37 $6,901.37 $8,558.98 $6,909.27 $6,909.27 $7,047.90 $7,047.90 $8,784.11 PS 1911 Pipe Roller PS 1911 2-3 1/2 EG PS 1911 2-3 1/2 GR PS 1911 2-3 1/2 HG PS 1911 4-6 EG PS 1911 4-6 GR PS 1911 4-6 HG PS 1911 8-10 EG 25 25 25 15 15 20 1 160 160 160 215 215 215 525 $7,941.94 $2,916.95 $3,442.99 $5,864.20 $2,986.90 $3,593.18 $11,346.11 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 2007 LH & RH ---- www.power-strut.com ---- List Price per 100 pcs Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 2017 Five Hole Corner Connector PS 2007 L EG 10 135 $3,069.42 PS 2007 L GR 10 135 $2,928.83 PS 2007 R EG 10 135 $3,069.42 PS 2007 R GR 10 135 $2,928.83 PS 2010 Two Hole Corner Angle Use With Junior Strut PS 2017 EG 100 5 $366.74 Zee Support Use With PS 600 J PS 2010 EG 100 7 $485.47 PS 2018 PS 2011 PS 2019 "U" Support Use With PS 600 J Four Hole Corner Angle Use With Junior Strut PS 2019 EG 100 11 $524.49 PS 2011 EG 50 12 $682.42 PS 2013 Square Washer Use With Junior Strut PS 2013 EG 100 2 $254.22 PS 2014 Two Hole Splice Plate Use With Junior Strut PS 2014 EG 100 5 $280.17 PS 2015 Three Hole Splice Plate Use With Junior Strut PS 2015 EG 100 8 $313.41 PS 2016 Four Hole Splice Plate Use With Junior Strut PS 2016 EG 50 11 Three Hole Corner Angle Use With Junior Strut PS 2018 EG 100 8 $426.33 PS 2023 RH & LH Four Hole Shelf Bracket Use With Junior Strut PS 2023 L EG 50 19 $996.10 PS 2023 R EG 50 19 $996.10 PS 2024 Four Hole Corner Angle Use With Junior Strut PS 2024 EG 50 11 $599.11 PS 2025 Three Hole Corner Angle Use With Junior Strut PS 2025 EG 100 8 $355.52 $346.47 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 31 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 2026 List Price per 100 pcs Use With PS 700 J PS 2026 EG 100 6 $429.53 PS 2029 Std Qty Wt./ 100 List Price per 100 pcs Double Column Post Base PS 2064 EG 5 311 $7,148.20 PS 2064 GR 5 311 $7,231.00 PS 2064 HG 5 315 $7,040.65 PS 2094 End Cap Use With PS 600 J PS 2029 EG 100 8 $698.63 PS 2033 Flat Angle Plate Use With Junior Strut PS 2033 EG 100 8 $828.49 PS 2034 Tee Plate Use With Junior Strut PS 2034 EG 100 11 $928.08 PS 2037 Four Hole Corner Angle PS 2037 EG 100 8 $478.93 PS 2041 14" Receptacle Box PS 2094 EG 10 93 $6,416.32 PS 2112 Cross Connector PS 2112 EG 10 240 $3,410.33 PS 2112 GR 10 240 $3,448.65 PS 2112 ZD 10 240 $3,448.65 PS 2113 Slotted Corner Connector PS 2113 EG 25 97 $1,960.82 PS 2113 GN 25 97 $1,960.82 PS 2117 RH & LH Wrap Around Connector PS 2117 LH GR 10 70 $2,144.78 PS 2117 RH EG 10 70 $2,084.21 PS 2117 RH GR 10 70 $2,144.78 PS 2119 EG EG EG EG EG EG EG 100 200 200 100 200 100 100 3 2 2 3 2 2 3 $307.64 $280.49 $269.80 $281.85 $265.02 $274.52 $289.00 Corner Connector Use With PS 200, PS 210 PS 2054 EG PS 2054 GR 10 10 93 93 $1,213.77 $1,213.77 PS 2054 32 Part No. & Length Fin. PS 2064 Zee Support O.D. Tubing Clamps Use With Junior Strut PS 2041 1 PS 2041 1/2 PS 2041 1/4 PS 2041 3/4 PS 2041 3/8 PS 2041 5/8 PS 2041 7/8 ---- www.power-strut.com ---- "U" Connector Use With PS 200 and PS 210 PS 2119 EG 25 95 $1,653.59 PS 2119 GR 25 95 $1,656.87 PS 2128 RH & LH Six Hole Corner Connector PS 2128 LH EG 10 119 $2,245.77 PS 2128 LH GR 10 119 $2,243.69 PS 2128 RH EG 10 119 $2,245.77 PS 2128 RH GR 10 119 $2,245.77 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 2129 RH & LH List Price per 100 pcs PS 2129 LH EG 10 176 $3,800.74 PS 2129 LH GR 10 176 $3,861.52 PS 2129 RH EG 10 176 $3,800.74 PS 2129 RH GR 10 176 $3,800.74 PS 2144 EG GR HG EG GR HG EG GR HG 25 25 50 25 25 25 25 25 25 54 54 54 49 49 49 61 61 61 $804.10 $795.00 $862.32 $725.34 $725.34 $778.24 $835.17 $825.72 $895.81 PS 2190 Flat Corner Connector PS 2190 EG 20 150 $2,251.76 PS 2190 GR 20 150 $2,251.76 PS 2190 HG 25 150 $2,371.59 PS 2401 Ladder Rung PS 2401 PS 2401 PS 2402 PS 2402 PS 2403 PS 2403 Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 2422 Single Corner Gussetted Connection PS 2129 RH As Illustrated; PS 2129 LH Opposite Hand Corner Angle PS 2144 3 1/2 PS 2144 3 1/2 PS 2144 3 1/2 PS 2144 3 PS 2144 3 PS 2144 3 PS 2144 4 PS 2144 4 PS 2144 4 ---- www.power-strut.com ---- GR HG GR HG GR HG 10 10 20 20 20 20 186 186 221 221 254 254 $2,209.98 $2,530.48 $2,268.19 $2,675.23 $2,616.96 $2,791.54 PS 2404 GR 10 113 PS 2404 HG 10 113 PS 2405 GR 10 164 PS 2405 HG 10 164 PS 2406 GR 10 216 PS 2406 HG 10 216 PS 2407 GR 10 267 PS 2407 HG 10 267 PS 2408 GR 10 78 PS 2408 HG 10 267 $1,552.76 $1,702.37 $2,151.71 $2,212.21 $2,595.96 $2,765.31 $2,965.83 $3,070.14 $3,295.65 $3,634.41 PS 2404 Wall Ladder Bracket PS 2421 37- 1/2° Stair Tread Support PS 2422 GR 25 213 $3,198.69 PS 2422 HG 25 213 $3,198.69 PS 2504 Square Washer With Channel Guide PS 2504 1/2 PS 2504 1/2 PS 2504 1/2 PS 2504 1/2 PS 2504 1/4 PS 2504 1/4 PS 2504 1/4 PS 2504 3/4 PS 2504 3/8 PS 2504 3/8 PS 2504 3/8 PS 2504 3/8 PS 2504 5/8 EG GR HG ZD EG GR ZD HG EG GR HG ZD HG 100 100 100 100 100 100 100 100 100 100 100 100 100 18 17 18 18 18 18 18 16 17 17 17 17 16 $279.23 $272.18 $295.73 $279.23 $319.05 $319.05 $310.98 $253.52 $279.23 $279.23 $295.73 $279.23 $310.81 PS 2511 End Cap With Knock Out Use With PS 100, PS 200, PS 210 and PS 300 Specify 1/2" or 3/4" U.L. Listed PS 2511 1 1/2 EG 50 PS 2511 1 3/4 EG 50 PS 2511 2 1/2 EG 50 PS 2511 2 3/4 EG 50 PS 2511 3 1/2 EG 50 PS 2511 3 3/4 EG 50 31 $1,159.74 31 $1,159.74 21 $895.61 21 $936.69 19 $1,078.06 19 $1,078.06 PS 2514 8 Hole Full Gusseted Corner Connector PS 2514 EG 10 300 $7,882.77 PS 2514 GR 10 300 $7,987.97 PS 2520 2 Hole Adjustment Angle PS 2520 EG 25 42 PS 2520 GR 25 42 PS 2520 HG 25 42 PS 2520 SS 25 42 $856.10 $856.10 $882.24 $1,947.25 PS 2521 2-Wheel Trolley PS 2521 EG 25 46 $5,174.42 45° Stair Tread Support PS 2421 GR 20 222 $3,160.23 PS 2421 HG 20 222 $3,385.96 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 33 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty PS 2522 Wt./ 100 List Price per 100 pcs 4-Wheel Trolley 9/16" Hole PS 2522 EG 10 110 $7,480.33 PS 2524 Two Wheel Light Duty Trolley PS 2524 EG 25 21 $3,503.95 PS 2524H EG 25 21 $3,938.46 PS 2525 Four Wheel Light Duty Trolley PS 2525 EG 25 55 $5,110.12 PS 2525 H EG 25 63 $6,071.68 PS 2528 Trolley Beam Standard Support Use With PS 200 and PS 210 PS 2528 EG 10 102 $2,278.03 PS 2528 GR 10 102 $2,278.03 PS 2528-1 ---- www.power-strut.com ---- Trolley Beam Joint Support Use With PS 200 and PS 210 PS 2528-1 EG 10 220 $3,088.15 PS 2528-1 GR 10 220 $3,085.29 PS 2532 Shelf Attachment Zee Use With PS 200 and PS 210 PS 2532 EG 100 9 $655.10 PS 2532 GR 50 9 $643.78 PS 2532-100 EG 100 13 $769.65 Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 2560 1/2" Conduit Connector U.L. Listed PS 2560 1/2 EG 50 28 $1,256.09 PS 2561 3/4" Conduit Connector Fitting Assembly U.L. Listed PS 2561 3/4 EG 25 28 $1,452.50 PS 2580 Type "A" End Cap Use With PS 150 U.L. Listed PS 2580 PG 50 16 $582.13 PS 2581 End Cap With Knock-Out Use With PS 150 Specify 1/2" or 3/4" U.L. Listed PS 2581 1/2 EG 50 24 $1,057.71 PS 2581 3/4 EG 50 24 $1,002.04 PS 2582 Raceway Splice Plate Use With PS 150; U.L. Listed PS 2582 EG 50 150 $1,810.27 PS 2585 Type "A" End Cap Use With PS 210 U.L. Listed PS 2585 PG 100 10 $147.44 PS 2601 Zee Support Use With PS 150 PS 2601 PS 2601 EG GR 20 20 67 67 $1,255.31 $1,291.79 PS 2545 Slotted 90° Angle PS 2545 EG 50 36 $788.11 PS 2545 GR 50 36 $783.72 PS 2545 HG 50 36 $829.64 34 PS 2622 J6/J10 Beam Clamp w/Hook Rod Use For 1/4"- 3/8"- 1/2" Rod PS 2622 EG 25 41 PS 2622 J 6 3/8 X 6 EG 25 78 PS 2622J 10 3/8 X 10 EG 20 91 $640.70 $1,331.22 $1,900.77 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 2623 ---- www.power-strut.com ---- List Price per 100 pcs Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 2632 Swivel Adaptor Swing Gate Strut Hanger Use With PS 2622 Beam Clamp or PS 2624 Wood Beam Hanger Use With PS 200, PS 210, PS 300, PS 400 and PS 500 U.L. Listed PS 2623 EG 50 31 $537.59 PS 2632 7/8 EG 20 25 $612.12 PS 2623 HG 50 31 $1,202.50 PS 2632 9/16 EG 20 25 $507.34 PS 2624 Wood Beam Hanger PS 2632D PS 2624 EG 25 22 $789.74 PS 2625 Wiring Stud Nut 1/2" Conduit Size 1" Thread Length U.L. Listed PS 2625 1/2 EG 50 PS 2625-2 5/8 EG 50 6 18 $1,152.08 $1,129.29 PS 2626-6 Beam Clamp PS 2626-12 EG 25 171 $2,072.18 PS 2626-6 EG 25 125 $1,515.85 PS 2626-9 EG 25 140 $1,862.28 PS 2627 Swing Gate Strut Hanger Use With PS 100 and PS 150 U.L. Listed PS 2632 D 9/16 EG 20 30 $749.39 PS 2636 Fixture Stud Nut 1/4"x 20 x 1 1/4" PS 2636 EG 100 5 $232.10 PS 2637 Fixture Nut 1/4"x20 PS 2637 1/4 EG 200 2 $154.61 Space Clevis PS 2627 EG 25 24 $732.79 PS 2631 Swing Gate Fixture Hanger Use With PS 200, PS 210, PS 300, PS 400 and PS 500 U.L. Listed PS 2631 9/16 EG 20 27 $996.95 PS 2631D (Formerly PS 2056) Swing Gate Fixture Hanger Use With PS 100 and PS 150 PS 2631 D 9/16 EG 20 33 $1,441.33 PS 2639 Outlet Box U.L. Listed Less Receptacle PS 2639 1 7/8 EG 20 83 $3,158.74 PS 2640 Wire Retainer PS 2640 PL 250 0 $91.67 PS 2648 "U" Support Use With PS 150 PS 2648 EG PS 2648 GR PS 2648 HG 10 10 25 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 108 $1,942.52 108 $1,940.72 110 $2,045.53 35 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 2651 List Price per 100 pcs EG EG HG ZD EG EG HG SS EG 25 25 25 25 25 25 25 25 10 80 80 80 80 93 93 93 93 105 $809.85 $809.85 $1,654.18 $852.81 $977.86 $977.86 $1,790.64 $2,870.32 $1,442.64 PS 2653 Purlin Clamp Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs PS 2660 Beam Clamp T1 Use With PS 200, PS 210, 300,400, 500 2T3T2 Use With PS 100, 150, and 200 T3 PS 2651 T1 PS 2651 T1 PS 2651 T1 PS 2651 T1 PS 2651 T2 PS 2651 T2 PS 2651 T2 PS 2651 T2 PS 2651 T3 ---- www.power-strut.com ---- T1 Use With PS 200, 210, 300, 400, 500T2 Use With PS 100, 150, 200 2T3 PS 2653 T1 EG - 175 $2,862.21 PS 2653 T2 EG - 179 $3,121.30 PS 2654 Column Attachment Use PS 2654 With PS 200 Use PS 2654 A With PS 500 Note: Price/100 pair PS 2654 A EG 25 104 $2,765.86 PS 2654 A GR 25 62 $2,987.13 PS 2654 EG 25 136 $2,542.83 PS 2654 GR 25 136 $2,633.29 PS 2656 "U" Boltbeam Clamp With Hook Specify 6" or 12" Max. Flange Width T1 Use With PS 200, 210, 300, 400, 500, 520 T2 Use With PS 100, 150, 200 2T3 (Box), PS 2661 (Cover) Junction Box With Cover PS 2660 EG 1 113 $4,650.43 PS 2662 Hub Assembly With Hardware PS 2662A EG 25 27 $3,057.36 PS 2700 Inside Strut Joiner PS 500, PS 520, PS 560 PS 2700 AL 50 20 $2,129.29 PS 2800 Inside Strut Joiner PS 2800 AL 50 20 $2,793.02 PS 2801 "T" Inside Strut Joiner PS 2801 AL 20 35 $4,826.53 PS 2802 "Elbow" Inside Strut Joiner PS 2802 AL 25 27 $4,059.35 PS 2803 PS 2656 T1 12 EG 10 142 $2,156.27 "Cross" Inside Strut Joiner PS 2656 T1 6 EG 25 130 $2,052.74 PS 2803 AL 25 45 $5,718.09 PS 2656 T2 12 EG 10 153 $2,631.61 PS 2656 T2 6 EG 10 141 $2,165.27 PS 2656 T3 2-1/2-6 EG 10 156 $2,165.27 PS 2656 T3 6-12 EG 10 168 $2,220.04 PS 2657 Double "U" Boltbeam Clamp [Specify 6" or 12" Max. Flange Width] T1 Use With PS 200, 210, 300,400, 500, 520 T2 Use With PS 100, 150, 200 2T3 PS 2657 T1 12 EG 10 210 $3,831.53 PS 2657 T2 12 EG 10 232 $4,196.38 PS 2657 T2 6 EG 10 226 $4,066.27 PS 2657 T3 2-1/2-6 EG 10 249 $4,000.33 PS 2657 TI 6 EG 10 204 $3,705.23 36 PS 3013 Single Column Base One Hole Attatchment Use With PS 200 and PS 210 PS 3013 PS 3013 FL PS 3013 FL PS 3013 PS 3013 PS 3013 EG EG GR GR HG ZD 10 10 10 10 10 10 307 307 307 307 307 307 $4,490.18 $4,365.59 $4,365.59 $4,490.18 $5,423.26 $4,489.68 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 3017 List Price per 100 pcs EG EG EG EG 200 200 200 200 1 1 1 1 $175.79 $175.79 $175.79 $175.79 PS 3025 Post Base Use With PS 200 and PS 210 PS 3025 PS 3025 FL PS 3025 FL PS 3025 FL PS 3025 PS 3025 PS 3025 EG EG GR HG GR HG ZD 10 10 10 10 10 10 10 282 282 282 282 282 296 282 $3,919.69 $3,844.22 $3,888.75 $5,960.59 $3,999.83 $5,960.59 $4,007.49 PS 3029 Double Column Post Base Use With All 3 1/4" Channels PS 3029 PS 3029 PS 3029 PS 3029 SQ PS 3029 SQ EG GR HG EG HG 10 10 5 10 5 325 325 325 325 325 $5,048.28 $5,048.28 $5,927.16 $4,908.03 $6,108.14 PS 3033 Post Base Use With PS 200 and PS 210 PS 3033 PS 3033 PS 3033 PS 3033 PS 3033 SQ PS 3033 SQ PS 3033 SQ PS 3033 Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs 4 Hole Slotted 90° Corner Connector PS 3049 EG 25 PS 3049 GR 25 PS 3049 HG 25 59 59 59 $1,054.62 $1,054.62 $1,080.81 25 25 25 25 25 25 25 81 81 92 104 115 115 127 $1,277.23 $1,276.05 $1,342.83 $1,412.51 $1,492.25 $1,490.87 $1,851.40 Double Column Post Base Use With All 3 1/4" Channels PS 3064 EG 10 PS 3064 FL EG 10 PS 3064 GR 10 PS 3064 HG 10 PS 3064 SQ EG 10 PS 3064 SQ GR 10 PS 3064 SQ HG 5 PS 3064 ZD 10 404 404 404 404 404 404 400 404 $6,288.74 $6,417.33 $6,417.33 $6,796.25 $6,343.85 $6,417.33 $6,796.25 $6,613.28 Hold Down Clamp PS 3126 1 1/2 EG 25 45 PS 3126 1 1/2 HG 25 45 PS 3126 1 1/4 EG 25 41 PS 3126 1 1/4 HG 25 41 PS 3126 1 EG 25 35 PS 3126 1 HG 25 35 PS 3126 1/2 EG 50 29 PS 3126 1/2 HG 50 29 PS 3126 2 1/2 EG 25 113 PS 3126 2 1/2 HG 25 113 PS 3126 2 EG 25 100 PS 3126 2 HG 25 100 PS 3126 3 1/2 EG 10 146 PS 3126 3 EG 25 132 PS 3126 3 HG 25 132 PS 3126 3/4 EG 50 32 PS 3126 3/4 HG 50 32 PS 3126 4 EG 10 166 PS 3126 4 HG 10 166 PS 3126 5 EG 10 191 PS 3126 5 HG 10 201 PS 3126 6 EG 10 223 PS 3126 6 HG 10 223 $905.88 $950.95 $881.56 $947.32 $847.00 $889.38 $780.00 $834.27 $1,544.57 $1,668.03 $1,418.13 $1,467.76 $1,222.00 $1,634.51 $1,716.47 $801.54 $861.58 $1,845.82 $2,084.51 $2,648.89 $2,905.27 $2,807.70 $3,014.37 PS 3049 Junior Strut Nuts Use With PS 600 J PS 3017 1/4 PS 3017 10/24 PS 3017 10/32 PS 3017 8/32 ---- www.power-strut.com ---- AL EG GR HG EG GR HG ZD 10 10 10 10 10 10 10 10 154 373 373 377 392 358 377 373 $10,501.26 $4,332.51 $4,336.10 $6,073.79 $4,332.51 $4,286.45 $6,073.79 $4,336.10 PS 3040 Post Base Use With PS 200 and PS 210 PS 3040 EG 10 297 $4,589.05 PS 3040 GR 10 297 $4,589.05 PS 3041 Double Column Post Base Use With All 3 1/4" Channels PS 3060 Offset Connector PS 3060 4 PS 3060 4 PS 3060 5 PS 3060 6 PS 3060 7 PS 3060 7 PS 3060 8 EG GR EG GR EG GR EG PS 3064 PS 3126 PS 3041 EG 20 130 $3,025.87 PS 3041 GR 20 130 $3,118.26 PS 3041 HG 20 130 $3,196.28 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 37 ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs EG EG EG EG EG EG EG EG EG EG EG 50 50 50 50 25 50 25 25 50 25 25 40 38 31 29 66 47 87 78 30 27 90 $1,535.99 $1,337.36 $1,192.88 $1,164.57 $1,941.87 $1,685.04 $2,171.51 $1,965.51 $1,132.81 $1,334.32 $2,398.64 PS 3164 Double Channel Bracket Support Use With All 3 1/4" Channels PS 3201 Swivel Nut Only; Use With PS 2622 Beam Clamp EG EG 200 200 3 4 $281.16 $240.59 Double Conveyor Adjusting Nut Use For All 1 5/8" Wide Power-Strut Channels PS 3281 3/8 EG 50 18 $500.79 PS 3282 Cable Tray Strut Bracket PS 400 Channel EG GR EG GR EG GR EG 1 1 1 1 1 1 50 388 $11,262.15 388 $7,117.63 506 $12,098.70 506 $8,813.67 672 $24,453.83 672 $14,371.19 1352 $25,375.61 PS 3301 Mercury Vapor Fixture Hanger PS 3301 EG 20 154 $2,285.50 PS 3326 LH & RH Five Hole Gussetted Corner Connector 38 20 20 20 15 20 15 151 151 151 151 151 160 List Price per 100 pcs EG GR EG GR 10 10 10 10 PS 3373 PS 3373 PS 3373 PS 3373 PS 3373 PS 3373W EG GR HG PL ZD HG $1,165.95 $1,184.03 $1,246.41 $1,138.50 $1,184.03 $2,607.12 PS 3500 Seismic Rod Stiffener PS 3500 3/8-5/8 EG 25 16 $944.09 Junior Strut Nuts Use With PS 700 J PS 4017 1/4 PS 4017 10/24 PS 4017 10/32 PS 4017 8/32 EG EG EG EG 200 200 200 200 1 1 1 1 $177.42 $180.76 $177.42 $177.42 12 10 13 9 9 14 8 2 2 2 2 6 6 5 5 4 4 7 7 4 4 $153.53 $117.88 $291.74 $106.24 $93.76 $204.75 $101.01 $79.61 $73.31 $65.88 $67.02 $100.11 $102.00 $78.54 $80.02 $67.65 $68.82 $110.24 $110.24 $67.02 $68.29 11 9 5 6 $561.60 $276.18 $168.86 $692.46 2 1 6 5 4 $60.39 $45.05 $147.45 $98.32 $93.26 PS 6024 PS 3281 PS 3326 L PS 3326 L PS 3326 R PS 3326 R Wt./ 100 PS 4017 PS 3164 EG 10 173 $7,594.64 PS 3164 GR 10 173 $7,594.64 PS 3164 HG 10 178 $7,972.67 PS 3282 12 PS 3282 12 PS 3282 18 PS 3282 18 PS 3282 24 PS 3282 24 PS 3282 36 Std Qty Universal Angle Bracket Parallel Pipe Clamp PS 3201 1/2 PS 3201 3/8 Part No. & Length Fin. PS 3373 PS 3138 PS 3138 1 1/2 PS 3138 1 1/4 PS 3138 1 PS 3138 1/2 PS 3138 2 1/2 PS 3138 2 PS 3138 3 1/2 PS 3138 3 PS 3138 3/4 PS 3138 3/8 PS 3138 4 ---- www.power-strut.com ---- 230 230 230 230 $5,576.34 $6,022.45 $5,576.34 $6,022.45 Hex Headcap Screw PS 6024 1/2 X 1 1/2 EG PS 6024 1/2 X 1 1/4 EG PS 6024 1/2 X 1 3/4 EG PS 6024 1/2 X 1 EG PS 6024 1/2 X 15/16 EG PS 6024 1/2 X 2 EG PS 6024 1/2 X 3/4 EG PS 6024 1/4 X 1 1/2 EG PS 6024 1/4 X 1 1/4 EG PS 6024 1/4 X 1 EG PS 6024 1/4 X 3/4 EG PS 6024 3/8 X 1 1/2 EG PS 6024 3/8 X 1 1/2 ZD PS 6024 3/8 X 1 1/4 EG PS 6024 3/8 X 1 1/4 ZD PS 6024 3/8 X 1 EG PS 6024 3/8 X 1 ZD PS 6024 3/8 X 2 EG PS 6024 3/8 X 2 ZD PS 6024 3/8 X 3/4 EG PS 6024 3/8 X 3/4 ZD 100 100 100 100 100 100 100 100 100 500 100 100 200 100 200 100 200 100 200 100 250 PS 6064 Square Head Cup Point Set Screw PS 6064 1/2 X 2 EG PS 6064 1/2 X1 1/2 EG PS 6064 3/8 X 1 1/2 EG PS 6064 3/8 X 2 EG 100 100 100 100 PS 6072 Round Head Machine Screw PS 6072 1/4 X 1 1/4 EG PS 6072 1/4 X 3/4 EG PS 6072 3/8 X 1 1/2 EG PS 6072 3/8 X 1 1/4 EG PS 6072 3/8 X 1 EG 100 100 100 100 100 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 PS 6075 ---- www.power-strut.com ---- List Price per 100 pcs Std Qty Wt./ 100 List Price per 100 pcs PS 9402 Slotted Hex Head Machine Screw PS 6075 1/4 X 1 EG PS 6075 1/4 X 3/4 EG PS 6075 3/8 X 1 1/4 EG PS 6075 5/16 X 1 1/2 EG PS 6075 5/16 X 1 1/4 EG PS 6075 5/16 X 1 EG 100 100 100 100 100 100 Two Hole Hinge Connector 2 1 6 3 3 3 $65.06 $47.98 $123.82 $70.45 $117.92 $66.28 PS 6108 PS 9402 1/2 EG PS 9402 3/4 EG PS 9402 5/8 - 1/2 EG PS 9402 5/8 EG EG EG EG EG 200 500 500 500 6 1 3 2 $89.89 $25.63 $55.90 $37.58 PS 6151 15 15 15 15 90 $3,894.71 86 $4,708.62 88 $4,496.98 88 $4,568.90 PS 9403 Three Hole Hinge Connector PS 9403 1/2 EG 15 108 $4,261.40 PS 9403 3/4 EG 15 106 $4,985.95 PS 9403 5/8 EG 15 107 $4,708.29 Square Nut PS 6108 1/2 PS 6108 1/4 PS 6108 3/8 PS 6108 5/16 Part No. & Length Fin. PS 9404 Four Hole Hinge Connector PS 9404 1/2 EG 15 126 $4,527.69 Plastic Closure Strip, 10Ft. Length Use With All Continuous Inserts PS 6151 10 PL 100 47 $860.68 PS 6152 Decorative End Cap Use With PS 200 and PS 210 PS 6152 EG 50 10 $1,234.04 PS 6153 Safety End Cap 1 Use With PS 100; 2 Use With PS 200 and PS 210; 3 Use With PS 300; 5 Use With PS 500 PS 6153 1 PS 6153 1 PS 6153 2 PS 6153 2 PS 6153 3 PS 6153 4 PS 6153 5 PS 6153 5 RED WHITE RED WHITE RED RED RED WHITE - - - - - - - - 5 5 2 32 2 5 1 1 $995.98 $937.52 $892.95 $892.95 $948.63 $698.88 $924.20 $698.71 PS 9400 Adjustable Brace PS 9400 EG 10 307 $4,327.29 PS 9400 GR 10 307 $4,396.49 PS 9400 HG 10 310 $4,849.94 PS 9401 Double Adjustable Brace PS 9401 PS 9401 EG GR 5 5 497 $7,523.79 497 $7,644.12 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 39 ---- PS2012 • Effective September 3, 2012 ---Part No. & Length Fin. Std Qty Wt./ 100 P8000, P8001 ---- www.power-strut.com ---- List Price per 100 pcs Std Qty Wt./ 100 List Price per 100 pcs P8400 P8400 P8401 P8401 P8402 P8402 P8403 P8403 P8404 P8404 P8405 P8405 P8406 P8406 P8407 P8407 P8409 P8409 P8410 P8410 P8411 P8411 P8413 P8413 EG PL EG PL EG PL EG PL EG PL EG PL EG PL EG PL EG PL EG PL EG PL EG PL 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 20 20 10 10 10 10 5 5 31 31 33 33 34 41 41 34 43 43 53 53 74 74 99 99 143 143 162 162 326 326 439 439 $189.68 $131.18 $195.53 $131.18 $212.18 $165.83 $225.45 $153.90 $259.88 $171.68 $292.28 $189.68 $425.70 $307.58 $487.80 $328.05 $744.08 $468.68 $1,035.00 $699.98 $1,379.70 $886.05 $2,096.33 $1,465.88 P8500 P8500 P8500 P8501 P8501 P8501 P8502 P8502 P8502 P8503 P8503 P8503 P8504 P8504 P8504 P8505 P8505 P8505 P8507 P8507 P8509 P8509 P8511 P8511 P8513 P8513 CT EG PL CT EG PL CT EG PL CT EG PL CT EG PL CT EG PL EG PL EG PL EG PL EG PL 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 15 15 Bulk Bulk Bulk Bulk 63 80 80 65 80 80 70 106 106 72 104 104 108 108 108 119 116 116 156 156 170 170 370 370 740 740 $404.33 $626.18 $404.33 $432.90 $626.18 $401.85 $549.68 $671.40 $431.78 $577.13 $653.40 $413.78 $660.60 $697.73 $452.03 $868.05 $720.23 $463.95 $1,036.35 $611.78 $1,213.88 $810.90 $2,264.63 $1,335.60 $3,968.55 $2,584.13 P8400 - P8413 Jr. Beam Clamp Standard Clevis Hanger P8000 P8000 P8001 P8001 EG PL EG PL 100 100 100 100 33 33 34 34 $429.53 $133.53 $339.63 $313.01 P8105 P8105 P8107 P8107 P8109 P8109 EG PL EG PL EG PL 50 50 25 25 25 25 17 17 57.1 57.1 72.7 72.7 $234.90 $156.15 $434.03 $307.58 $577.13 $380.48 P8200 P8200 P8200 P8201 P8201 P8201 P8202 P8202 P8202 P8203 P8203 P8203 P8204 P8204 P8204 P8205 P8205 P8205 CT EG PL CT EG PL CT EG PL CT EG PL CT EG PL CT EG PL 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 7 13 13 8 15 15 9 17 17 12 28 28 14 26 26 23 20 20 $237.15 $294.15 $252.60 $252.60 $299.10 $263.10 $270.90 $301.80 $273.60 $284.10 $407.55 $371.55 $351.15 $523.35 $449.10 $351.15 $702.15 $600.90 P8300 P8300 P8301 P8301 P8302 P8302 P8303 P8303 P8304 P8304 P8305 P8305 P8306 P8307 P8309 P8310 P8311 P8313 CT NFPA CT NFPA CT NFPA CT NFPA CT NFPA CT NFPA NFPA NFPA NFPA NFPA NFPA NFPA 100 100 100 100 100 100 100 100 100 100 100 100 50 50 20 20 20 20 11 10 11 10 12 10 13 11 14 11 16 14 19 23 30 50 58 90 $131.40 $69.08 $131.40 $69.08 $131.40 $69.08 $131.40 $77.18 $138.83 $77.18 $147.38 $80.78 $147.15 $157.95 $233.78 $376.20 $456.75 $596.25 P8105 - P8109 Light Weight Clevis Hangr P8200 - P8313 Split Ring Clamp P8300 - P8315 Ring Hanger 40 Part No. & Length Fin. P8500 - P8513 Standard Riser Clamp GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. ---- PS2012 • Effective September 3, 2012 --- Part No. & Length Fin. Std Qty Wt./ 100 P8600 List Price per 100 pcs ---- www.power-strut.com ---Part No. & Length Fin. Std Qty Wt./ 100 List Price per 100 pcs Cushion Clamp P8600-125 P8600-150 P8600-1 P8600-250 P8600-25 P8600-2 P8600-37 P8600-3 P8600-4 P8600-50 P8600-62 P8600-75 P8600-87 EG EG EG EG EG EG EG EG EG EG EG EG EG 100 100 100 50 100 50 100 25 25 100 100 100 100 15 $550.00 16 $723.50 13 $459.75 33 $1,378.00 7 $343.25 28 $1,211.00 7 $343.25 38 $1,766.25 58 $3,340.25 8 $343.25 8 $343.25 9 $351.25 9 $393.50 P8700-125 P8700-150 P8700-1 P8700-250 P8700-2 P8700-3 P8700-4 P8700-50 P8700-75 CP CP CP CP CP CP CP CP CP 100 100 100 50 50 25 25 100 100 15 16 13 33 28 38 58 8 9 P8700 CT Strut Clamp $210.75 $235.75 $186.75 $369.75 $282.25 $383.00 $560.50 $155.00 $172.25 GR: Painted Green; EG: Electro-Galvanized; PG: Pre-Galvanized; AL: Aluminum; HG: Hot Dipped Galvanized; PL: Plain; SS: Stainless Steel; ZD: Zinc Dichromate Note: Less than box/bundle quantities will meet with a (list x multiplier) discount. 41 material, FINISH specifications, Ordering information POWER–STRUT® - ordering information Net Cutting Charges – The following schedule of cutting charges applies when nonstandard lengths are ordered. Square Cuts-all Lengths – Following charges will be invoiced as a separate item, and are not subject to discount. Single Channel Compound Channel Square Cuts .1.06/ea. .2.12/ea. Cutting Tolerance – Cutting tolerance is plus or minus 1⁄8" POA Items – Price On Application. Provide quantities with inquiries for a quotation on price and availability. Warning: Power-Strut products are carefully designed and manufactured to the listed standards, as applicable. However, Power-Strut reserves the right to revise product design without notification. Power-Strut products included in this catalog are intended for installation and service only as described or specified herein. Care should be exercised by installers and end-users to install, use and maintain these products properly to avoid any possible on-the-job accidents. Prices subject to change with out notice. Material Specifications Finish Specifications Standard Length of Channel – 10’ and 20’ for all 15⁄8" wide strut, 10’ for PS 600 and PS 700 (13⁄16" wide) Junior Strut Aluminum or Stainless Steel Channel and Fittings – Some aluminum components are listed in this book. Many other items in this book are available in aluminum or stainless steel materials. Price and delivery information available on request. PVC Coated Channel and Fittings – Most of the channel and fittings shown in this price sheet are available with a PVC coating. Price and delivery information available on request. There may be a minimum charge for PVC coating depending upon order size. WARNING: PVC COATED MATERIAL MUST BE USED WITH CAUTION! WHEN SMOLDERING OR BURNING, PVC EMITS HIGHLY TOXIC HYDROGEN CHLORIDE GAS (HCL). EVEN SHORT TERM EXPOSURE MAY BE HAZARDOUS. Fiberglass Channel and Fittings – Most of the channel and fittings shown in this price sheet are available in FiberReinforced Plastic (FRP). Price and delivery information available on request. Special Components and Finishes – POWER-STRUT® can provide custom components to your design or special finishes when required. Price quotations are prepared on request. A minimum charge and order size may be required, and overruns of up to 10% may be manufactured, shipped, and invoiced. Some items cannot be provided in a hot-dipped galvanized finish due to closure of threads. Check with the factory when threads are involved. Items ordered hot-dipped galvanized will be supplied with electro–galvanized threaded components unless otherwise stated in our proposal. Channel* & Closures – Pre–Galvanized: ASTM A653 Grade 33, Steel Sheet Zinc Coated by Hot Dip Process Channel* – Plain, Painted or Hot Dip Galvanized: ASTM A–1011 SS Grade 33, Hot Rolled Carbon Steel Sheet and Strip, Structural Quality Channel* – Stainless Steel: ASTM A–240, Type 304, Heat Resisting Chromium and Chromium–Nickel Stainless Steel Plate, Sheet, Strip for Pressure Vessel Channel* – Aluminum: ASTM B–221, Type 6063 T6, Aluminum Alloy Extruded Bar, Rod, Wire, Shape and Tube Closures – Plain, Painted or Hot Dip Galvanized: ASTM A366, Steel, Strip, Carbon, Cold–Rolled Fittings* – Steel: ASTM A–575 and A576† ( 1⁄4" Nominal Thickness); A36 Structural Steel ( 3⁄8" Nominal Thickness) Fittings* – Aluminum: ASTM B–209 Accessories – Steel: Less than 1⁄4" Nominal Thickness – ASTM A–569, 1008–1010 Grade, or (when Pre–Galvanized) ASTM A–527/Coating Designation G90 Pipe Clamps – Steel: A1011 SS Grade 33 Pipe Clamps – Stainless Steel: ASTM A–240, Type 304 Pipe Clamps – Aluminum: ASTM B-209, 5052, H32 Grade, Sheet and Plate Channel Nuts: ASTM (3⁄8" & 1⁄2") A-576 Grade 1015M, A–675 (1⁄4") Grade 60, Case Hardened to RC25 min. Hex Nuts and Bolts: ASTM A–563, Grade A and ASTM A–307, Grade A Threaded Rod: ASTM A–510, Hot Rolled, 1008–1010 Grade 42 Channel and Closures – Pre Galvanized: ASTM A–525, Grade 90 Gen. Requirement for Steel Sheet, Zinc–Coated (Galvanized) by Hot Dip Process Channel, Closures and Fittings – Power-Green™: Acrylic enamel applied by electro-deposition process Channel and Closures - Hot Dip Galvanized After Fab.: ASTM A–123, Zinc Coating (Hot Dip) on Iron and Steel Bolts, Nuts, Clamps and Fittings – Electroplated (EG): ASTM B–633, SC1 Electroplated Coatings of Zinc on Iron and Steel Bolts, Nuts, Clamps and Fittings – Hot Dip Galvanized After Fabrication: ASTM A–153 or ASTM A–123, Zinc Coatings (Hot Dip) on Iron and Steel Hardware FINISHES (Ordering): When ordering, add the finish to the part number. For example, PS 200-10 PG The abbreviation for available finishes: GR Painted Green EG Electro-Galvanized PG Pre-Galvanized AL Aluminum HG Hot Dipped Galvanized PL Plain SS Stainless Steel EV Everdur (Silicon Bronze) ZD Zinc Dichromate * Channel referenced is 15⁄8" wide, fittings referenced are for 15⁄8" channel. † Some 1⁄4" fittings are produced from A-36 Structural Steel. Terms & Conditions 1. COMPLETE AGREEMENT: This proposal, including these Conditions and Terms of Sale, constitutes the sole offer of Atkore International (Seller), and shall control with respect to any purchase order or sale of Seller’s products. No other terms and conditions, alterations or modifications shall be binding upon Seller unless accepted by Seller in writing. No modifications of any of these terms will be effected by Seller’s shipment of goods following receipt of Buyer’s purchase order, shipping request or similar forms containing printed terms and conditions conflicting of inconsistent with the terms herein. Acceptance of delivery by Buyer will constitute Buyer’s assent to these terms and conditions. 2. CHANGES, TERMINATION, HOLDS, RETURNS: Any changes to specifications, drawings, and/or quantities originally ordered must be made in writing and will be accepted by Seller only upon Buyer’s written acceptance of an equitable adjustment in costs, time, and material involved. Seller’s election to proceed without such prior written agreement in any instance shall not be deemed a waiver of Seller’s right to receive price and schedule adjustments there for or to insist upon such prior written agreement for any subsequent changes in work. Termination of this agreement as to any portion of goods then not shipped must be made in writing and shall be subject to an equitable adjustment as to any work in progress, costs, incurred by Seller for special material and/or labor requirement, etc. Buyer shall be liable for the total cost of engineering services expended, special tools and/or non-standard products manufactured or purchased specifically for the Buyer. Non-standard products include made-to-order items as well as items and/or quantities not normally made-tostock by the factory. In case of Buyer requested holds in fabrication and/or shipment any associated costs shall be to Buyer’s account. Seller’s acceptance of returns are subject to its written permission and receipt of material at Seller’s plant in first-class condition. Buyer shall be credited as follows: (a) Any cost of restoring material to saleable condition will be deducted from credit memoranda. (b) A twenty five percent (25%) restocking charge shall apply to all returns. (c) Transportation charges shall be paid by Buyer. (d) Non-standard and purchased items are considered non-returnable. (e) Any excess material on the lump sum contract is the property of the Seller, and the Buyer is obligated to make the Seller aware of any excess material, with no credit being allowed for this material. 3. DELIVERY AND FORCE MAJEURE: Seller shall not be liable for non-performance or delays in performance, shipment, or delivery due to causes beyond the reasonable control of Seller, including without limitation to such causes as war, riots, insurrection, fire, flood or other casualties, labor disturbances or disruptions, acts of defaults of suppliers or carriers, unavailability of material or supplies, or governmental rules or regulations. It is further assumed that all required information (including complete, final and approved de- sign drawings and specifications and approval of shop drawings, if any) is received by Seller in such times and manner as will not delay or interfere with Seller’s performance. In the event of any such delay, the delivery date shall be extended not to exceed the period of such delay or in the event such delay shall continue for a period of sixty (60) days, Seller (without liability of any nature) reserves the right to terminate any contract by written notice to Buyer. 4. SHIPMENT: The cost of any special packaging or special handling in accordance with Buyer’s requirement or requests, shall be added to the amount of the order. Buyer agrees to inspect the material upon delivery and no claims for shortages or delivery of apparently improper or defective material will be accepted by Seller unless written notice is sent to Seller within ten (10) days from the date of delivery. Claims for shortages, products damaged or lost in transit, on F.O.B. Point of Shipment Orders, should be directed to the transportation company. 5. DESIGNS: Product designs subject to change without notice. 6. PRICES AND PAYMENT: Unless specifically stated in our proposal, all prices are subject to change without notice, and payment shall be 2% (two percent), 15th prox. net cash immediately thereafter. 7. TAXES: Any taxes subject to the purchase of our products shall be to the account of the Buyer. 8. FREIGHT ALLOWANCE: All prices F.O.B. point of shipment. On individual shipment weighing 5,00 pounds or more, rail freight or motor freight at the lowest published rate is allowed to all U.S. rail points or all U.S. Highway points listed in published tariffs (Hawaii and Alaska excluded). 2,500 lbs for hangers only (section 3) sold in full carton quantities. There is no minimum required for hangers when combined with a freight allowed Freight order. 9. LIMITED WARRANTY: Seller warrants to Buyer that the goods to be shipped hereunder will meet applicable specifications. THE FOREGOING EXPRESS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. No allowance will be made for labor expenses for repairing or replacing defective products or workmanship or damage resulting from same unless previously and specifically authorized by Allied Tube and Conduit Corporation. Any product replaced pursuant to this warranty shall be subject to the same terms contained herein. Seller shall not be responsible for any losses or damage sustained by Buyer or any other person as the result of the use of Seller’s product by Buyer other than as illustrated or described in its catalog. 10. REMEDY: If it appears within thirty (30) days from the date of receipt by Buyer or Buyer’s agent that the goods shipped do not meet the Seller’s above express warranty and Buyer notifies Seller in writing, within such period, Seller, at its option, will repair or replace such defective or nonconforming goods or return the purchase price paid therefor by Buyer. THE LIABILITY OF SELLER TO BUYER ARISING OUT OF THE SUPPLYING OF SAID GOODS OR THEIR USE, WHETHER ON WARRANTY, CONTRACT OR NEGLIGENCE IS LIMITED SOLELY TO THE REPLACEMENT OR REPAIR OF DEFECTIVE GOODS OR RETURN OF THE PURCHASE PRICE, AS HEREIN PROVIDED, AND UPON THE EXPIRATION OF SAID THIRTY (30) DAY PERIOD ALL SUCH LIABILITY SHALL TERMINATE. THE FORGOING SHALL CONSTITUTE THE SOLE REMEDY OF THE BUYER AND THE SOLE LIABILITY OF SELLER, IN NO EVENT SHALL THE SELLER BE LIABLE FOR SPECIAL , INCIDENTAL OR CONSEQUENTIAL DAMAGES. Buyer shall bear all cost of disassembly, shipment and reinstallation of any defective, repaired or replaced goods and shall return to Seller, only upon written authorization of Seller, all goods for which refund or purchase price is made. 11. MINIMUM INVOICE: .100.00 PER ORDER NET PLUS TRANSPORTATION. 12. RETURN OR GOODS: NO GOODS SHOULD BE RETURNED WITHOUT FIRST OBTAINING WRITTEN PERMISSION FROM THE FACTORY FOR AUTHORIZATION AND SHIPPING INSTRUCTIONS. 13. INDEMNITY: Buyer agrees to indemnify and shall hold Seller harmless against any and all claims, losses, costs, damages, causes of action at law or equity, lawsuits, or judgements as a result of any act, failure to act or negligence of Buyer or as a result of the failure or any defect in any of Seller’s products manufactured by Seller pursuant to any designs, prints, engineering or fabrication work supplied by Buyer. 14. PATENT INFRINGEMENT: If any article furnished to your specifications, or the process of its fabrication is covered by a patent, buyer agrees to hold seller harmless from any action, cost or expenses occasioned by any contract, of such patent or patents. 15. BUYER’S CREDIT: Delivery by Seller of goods hereunder shall at all times be subject to the approval of Buyer’s credit by Seller. Seller may at any time withhold delivery of any goods hereunder pending receipt of payment of amounts due Seller from Buyer and/or security for payment of the amount to become due Seller as a result of the delivery of the goods. 16. MISCELLANEOUS: Any action or suit arising in any way under this agreement must be commenced within one (1) after such cause of action has accrued, and otherwise, shall be forever waived, released, discharged and barred. This agreement shall be construed in accordance with the laws of the State of Illinois. Waiver by either party of any default by the other hereunder shall not be deemed a waiver by such party of any default by the other which my thereafter occur. 43
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 5.2-c003 61.141987, 2011/02/22-12:03:51 Create Date : 2012:08:08 10:41:53-04:00 Metadata Date : 2012:08:08 10:42:47-04:00 Modify Date : 2012:08:08 10:42:47-04:00 Creator Tool : Adobe InDesign CS5.5 (7.5.3) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 12833 bytes, use -b option to extract), (Binary data 7210 bytes, use -b option to extract) Instance ID : uuid:6a8add30-d490-6745-a886-31d2ed2c3c81 Document ID : xmp.did:FE8FD103D720681188C6C7F0664D6ABB Original Document ID : adobe:docid:indd:ef2eecb6-42bf-11dd-89e1-e1c375c23101 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:78D4B717C720681188C6C7F0664D6ABB Derived From Document ID : xmp.did:8DC50EA7B32168118A6DAC5E273FA2B1 Derived From Original Document ID: adobe:docid:indd:ef2eecb6-42bf-11dd-89e1-e1c375c23101 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:599FA5D6252068118F62C7F6AD7E2BBA, xmp.iid:5A9FA5D6252068118F62C7F6AD7E2BBA, xmp.iid:74117FCF20071168B34BBE806B890F90, xmp.iid:74117FD020071168B34BBE806B890F90, xmp.iid:74117FD120071168B34BBE806B890F90, xmp.iid:74117FD220071168B34BBE806B890F90, xmp.iid:F77F1174072068119109FE10F754E9C1, xmp.iid:F87F1174072068119109FE10F754E9C1, xmp.iid:F97F1174072068119109FE10F754E9C1, xmp.iid:FA7F1174072068119109FE10F754E9C1, xmp.iid:FB7F1174072068119109FE10F754E9C1, xmp.iid:FC7F1174072068119109FE10F754E9C1, xmp.iid:FD7F1174072068119109FE10F754E9C1, xmp.iid:FE7F1174072068119109FE10F754E9C1, xmp.iid:FF7F1174072068119109FE10F754E9C1, xmp.iid:00801174072068119109FE10F754E9C1, xmp.iid:CCDC0B3C0D2068119109FE10F754E9C1, xmp.iid:CDDC0B3C0D2068119109FE10F754E9C1, xmp.iid:CEDC0B3C0D2068119109FE10F754E9C1, xmp.iid:CFDC0B3C0D2068119109FE10F754E9C1, xmp.iid:D0DC0B3C0D2068119109FE10F754E9C1, xmp.iid:D1DC0B3C0D2068119109FE10F754E9C1, xmp.iid:D2DC0B3C0D2068119109FE10F754E9C1, xmp.iid:D3DC0B3C0D2068119109FE10F754E9C1, xmp.iid:D4DC0B3C0D2068119109FE10F754E9C1, xmp.iid:D5DC0B3C0D2068119109FE10F754E9C1, xmp.iid:D6DC0B3C0D2068119109FE10F754E9C1, xmp.iid:AAAF31E9102068119109FE10F754E9C1, xmp.iid:ABAF31E9102068119109FE10F754E9C1, xmp.iid:ACAF31E9102068119109FE10F754E9C1, xmp.iid:ADAF31E9102068119109FE10F754E9C1, xmp.iid:AEAF31E9102068119109FE10F754E9C1, xmp.iid:AFAF31E9102068119109FE10F754E9C1, xmp.iid:B0AF31E9102068119109FE10F754E9C1, xmp.iid:B1AF31E9102068119109FE10F754E9C1, xmp.iid:B2AF31E9102068119109FE10F754E9C1, xmp.iid:B3AF31E9102068119109FE10F754E9C1, xmp.iid:B4AF31E9102068119109FE10F754E9C1, xmp.iid:D423E4A8142068119109FE10F754E9C1, xmp.iid:D523E4A8142068119109FE10F754E9C1, xmp.iid:D623E4A8142068119109FE10F754E9C1, xmp.iid:D723E4A8142068119109FE10F754E9C1, xmp.iid:D823E4A8142068119109FE10F754E9C1, xmp.iid:D923E4A8142068119109FE10F754E9C1, xmp.iid:DA23E4A8142068119109FE10F754E9C1, xmp.iid:DB23E4A8142068119109FE10F754E9C1, xmp.iid:DC23E4A8142068119109FE10F754E9C1, xmp.iid:DD23E4A8142068119109FE10F754E9C1, xmp.iid:DE23E4A8142068119109FE10F754E9C1, xmp.iid:96C31B8E1D2068119109FE10F754E9C1, xmp.iid:97C31B8E1D2068119109FE10F754E9C1, xmp.iid:98C31B8E1D2068119109FE10F754E9C1, xmp.iid:99C31B8E1D2068119109FE10F754E9C1, xmp.iid:9AC31B8E1D2068119109FE10F754E9C1, xmp.iid:9BC31B8E1D2068119109FE10F754E9C1, xmp.iid:9CC31B8E1D2068119109FE10F754E9C1, xmp.iid:9DC31B8E1D2068119109FE10F754E9C1, xmp.iid:9EC31B8E1D2068119109FE10F754E9C1, xmp.iid:9FC31B8E1D2068119109FE10F754E9C1, xmp.iid:A0C31B8E1D2068119109FE10F754E9C1, xmp.iid:E2717738222068119109FE10F754E9C1, xmp.iid:E3717738222068119109FE10F754E9C1, xmp.iid:E4717738222068119109FE10F754E9C1, xmp.iid:E5717738222068119109FE10F754E9C1, xmp.iid:E6717738222068119109FE10F754E9C1, xmp.iid:E7717738222068119109FE10F754E9C1, xmp.iid:E8717738222068119109FE10F754E9C1, xmp.iid:E9717738222068119109FE10F754E9C1, xmp.iid:EA717738222068119109FE10F754E9C1, xmp.iid:EB717738222068119109FE10F754E9C1, xmp.iid:EC717738222068119109FE10F754E9C1, xmp.iid:D5A262DBE82068118A6DAC5E273FA2B1, xmp.iid:D6A262DBE82068118A6DAC5E273FA2B1, xmp.iid:45457F8DE92068118A6DAC5E273FA2B1, xmp.iid:A8551B31EF2068118A6DAC5E273FA2B1, xmp.iid:E4FF56E1EF2068118A6DAC5E273FA2B1, xmp.iid:85A1B3A89C2168118A6DAC5E273FA2B1, xmp.iid:1C440FD1A02168118A6DAC5E273FA2B1, xmp.iid:00E9B26DA62168118A6DAC5E273FA2B1, xmp.iid:DCDDB26AA72168118A6DAC5E273FA2B1, xmp.iid:C5C240D7A72168118A6DAC5E273FA2B1, xmp.iid:D820BCF8A82168118A6DAC5E273FA2B1, xmp.iid:26A47569B32168118A6DAC5E273FA2B1, xmp.iid:E7E79587B32168118A6DAC5E273FA2B1, xmp.iid:E8E79587B32168118A6DAC5E273FA2B1, xmp.iid:8DC50EA7B32168118A6DAC5E273FA2B1, xmp.iid:7E3F3A2AC120681197A5EE62CEA0A8B3, xmp.iid:CB608A30C220681197A5EE62CEA0A8B3, xmp.iid:616F3808C320681197A5EE62CEA0A8B3, xmp.iid:72F6AB4BC620681197A5EE62CEA0A8B3, xmp.iid:B8DF4BDBC720681197A5EE62CEA0A8B3, xmp.iid:920E4B20C820681197A5EE62CEA0A8B3, xmp.iid:930E4B20C820681197A5EE62CEA0A8B3, xmp.iid:87E4AF15C920681197A5EE62CEA0A8B3, xmp.iid:78D4B717C720681188C6C7F0664D6ABB, xmp.iid:FE8FD103D720681188C6C7F0664D6ABB, xmp.iid:A0D18A22DC20681188C6C7F0664D6ABB, xmp.iid:8173ABEDDC20681188C6C7F0664D6ABB, xmp.iid:A0210D88DD20681188C6C7F0664D6ABB, xmp.iid:A0CA6B1BDE20681188C6C7F0664D6ABB, xmp.iid:AA98EECEDE20681188C6C7F0664D6ABB, xmp.iid:249FBACFE120681188C6C7F0664D6ABB, xmp.iid:BD1D4E147321681188C6C7F0664D6ABB, xmp.iid:CF1D53467321681188C6C7F0664D6ABB, xmp.iid:016E3F740720681188C6E73BEADD1847, xmp.iid:E5E736EF0720681188C6E73BEADD1847, xmp.iid:1A18573E0820681188C6E73BEADD1847, xmp.iid:84DE4C481321681188C6E73BEADD1847, xmp.iid:FCBC60E80A2068119457B48F2C6EFA75, xmp.iid:52BE6E6A0F2068119457B48F2C6EFA75 History When : 2009:07:23 15:17:14Z, 2009:07:23 15:17:15Z, 2009:07:27 11:19:35-04:00, 2009:07:27 11:19:36-04:00, 2009:07:27 11:23:03-04:00, 2009:07:27 11:23:08-04:00, 2009:07:27 11:47:50Z, 2009:07:27 11:52:13Z, 2009:07:27 11:53:06Z, 2009:07:27 11:55:37Z, 2009:07:27 11:59:02Z, 2009:07:27 12:09:37Z, 2009:07:27 12:14:12Z, 2009:07:27 12:15:32Z, 2009:07:27 12:19:09Z, 2009:07:27 12:25:58Z, 2009:07:27 12:29:13Z, 2009:07:27 12:31:57Z, 2009:07:27 12:35:58Z, 2009:07:27 12:37:57Z, 2009:07:27 12:39:26Z, 2009:07:27 12:41:13Z, 2009:07:27 12:44:08Z, 2009:07:27 12:46Z, 2009:07:27 12:47:17Z, 2009:07:27 12:51:07Z, 2009:07:27 12:52:43Z, 2009:07:27 12:55:32Z, 2009:07:27 12:56:16Z, 2009:07:27 12:56:23Z, 2009:07:27 12:58:23Z, 2009:07:27 12:58:45Z, 2009:07:27 13:01:24Z, 2009:07:27 13:06:57Z, 2009:07:27 13:09:18Z, 2009:07:27 13:09:47Z, 2009:07:27 13:14:44Z, 2009:07:27 13:19:36Z, 2009:07:27 13:22:22Z, 2009:07:27 13:23:49Z, 2009:07:27 13:25:53Z, 2009:07:27 13:26:50Z, 2009:07:27 13:31:45Z, 2009:07:27 13:40:19Z, 2009:07:27 13:44:25Z, 2009:07:27 13:45:30Z, 2009:07:27 14:15:55Z, 2009:07:27 14:17:42Z, 2009:07:27 14:20:02Z, 2009:07:27 14:26:02Z, 2009:07:27 14:31:35Z, 2009:07:27 14:33:59Z, 2009:07:27 14:36:22Z, 2009:07:27 14:37:57Z, 2009:07:27 14:41:33Z, 2009:07:27 14:49:13Z, 2009:07:27 14:51:23Z, 2009:07:27 14:51:51Z, 2009:07:27 14:52:50Z, 2009:07:27 14:53:28Z, 2009:07:27 14:59:26Z, 2009:07:27 15:02:28Z, 2009:07:27 15:03:22Z, 2009:07:27 15:05:04Z, 2009:07:27 15:07:08Z, 2009:07:27 15:09:45Z, 2009:07:27 15:10:24Z, 2009:07:27 15:10:25Z, 2009:07:27 15:23:05Z, 2009:07:27 15:33:25Z, 2009:07:27 15:35:21Z, 2012:01:17 17:42:03-05:00, 2012:01:17 17:42:03-05:00, 2012:01:17 17:47:02-05:00, 2012:01:17 18:27:24-05:00, 2012:01:17 18:32:20-05:00, 2012:01:18 15:09:13-05:00, 2012:01:18 15:38:59-05:00, 2012:01:18 16:19:09-05:00, 2012:01:18 16:26:14-05:00, 2012:01:18 16:29:16-05:00, 2012:01:18 16:37:21-05:00, 2012:01:18 17:52:06-05:00, 2012:01:18 17:52:56-05:00, 2012:01:18 17:53:49-05:00, 2012:01:18 17:53:49-05:00, 2012:02:23 14:26:26-05:00, 2012:02:23 14:33:46-05:00, 2012:02:23 14:39:48-05:00, 2012:02:23 15:03:10-05:00, 2012:02:23 15:14:20-05:00, 2012:02:23 15:16:16-05:00, 2012:02:23 15:17:27-05:00, 2012:02:23 15:23:08-05:00, 2012:07:31 16:49:17-04:00, 2012:07:31 16:49:18-04:00, 2012:07:31 17:25:57-04:00, 2012:07:31 17:31:38-04:00, 2012:07:31 17:35:57-04:00, 2012:07:31 17:40:04-04:00, 2012:07:31 17:45:05-04:00, 2012:07:31 18:06:35-04:00, 2012:08:01 11:26:32-04:00, 2012:08:01 11:27:56-04:00, 2012:08:02 08:32:04-04:00, 2012:08:02 08:35:30-04:00, 2012:08:02 08:37:43-04:00, 2012:08:03 16:29:23-04:00, 2012:08:08 10:09:16-04:00, 2012:08:08 10:41:33-04:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /, /metadata, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Doc Change Count : 4475 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 44 Creator : Adobe InDesign CS5.5 (7.5.3)EXIF Metadata provided by EXIF.tools