Object Detection – Sophisticated Sensor Technology For All Areas Of Automation Edition 1302 100863 Catalog
100863-Catalog 100863-Catalog 100863-Catalog 017688 Batch7 unilog cesco-content
2014-09-05
: Pdf 100863-Catalog 100863-Catalog 054007 Batch7 unilog
Open the PDF directly: View PDF 
.
Page Count: 295
| Download | |
| Open PDF In Browser | View PDF |
Object Detection Sophisticated sensor technology for all areas of automation With over 50 years of sensor experience, Balluff is a leading global sensor specialist with its own line of connectivity products for every area of factory automation. Balluff is based in Germany and has a tight international network of 54 representatives and subsidiaries. Benefit from comprehensive sensor expertise from a single source. Achieve solutions suited to your requirements. Balluff stands for comprehensive systems from a single source, continuous innovation, state-of-the-art technology, highest quality, and greatest reliability. That's not all: Balluff also stands for exceptional customer orientation, customized solutions, fast worldwide service, and outstanding application assistance. High-quality, innovative products tested in our own accredited laboratory and a quality management system certified according to DIN ISO 9001 (EN 2008) form a secure foundation for optimized added value for our customers. Whether electronic and mechanical sensors, rotary and linear transducers, identification systems or optimized connection technology for high-performance automation, Balluff masters not only the entire technological variety with all of the different operating principles, but also provides technology that fulfills regional quality standards and is suitable for use worldwide. Wherever you are in the world, Balluff technology is never far away. You won't have to look far for you nearest Balluff expert. Balluff products increase performance, quality and productivity around the world every day. They satisfy prerequisites for meeting demands for greater performance and cost reductions on the global market. Including in the most demanding areas. No matter how stringent your requirements may be, Balluff delivers state-of-the-art solutions. 2 For more information, visit us online! Object Detection Sophisticated sensor technology for all areas of automation Photoelectric sensors 14 Inductive sensors 408 Capacitive sensors 700 Magnetic cylinder sensors 780 Industrial networking and connectivity − A selection 844 You will find many additional products in our total product line, "Industrial networking and connectivity – Intelligent and comprehensive networking for system technology". Accessories − A selection 876 You will find many additional products in our total product line, "Accessories product line – Optimal peripherals for sensors". ■ www.balluff.com Basic information and definitions 884 Alphanumerical directory Worldwide Sales 930 958 3 Inductive Sensors Inductive sensors for object detection Automation is almost inconceivable without inductive sensors. Wherever processes are automated, non-contact position detection, freedom from wear, and reliability are in demand. Whether in machine building, automation technology, electronics manufacturing or the plastics industry, in textile machines, wood processing or in the automobile industry – Balluff sensors monitor, control and automate processes and states. Providing the highest quality and optimized for any application. From standard to extended switching distance, from temperature and high pressure rated to "Factor 1" from mini to maxi: You too can take advantage of Balluff's versatility in your applications. And profit from the reliability and quality of proven products from your full-line provider. 408 For more information, visit us online! Inductive Sensors Contents Inductive sensors Performance spectrum Product overview 410 412 DC 3-wire inductive global sensors Cylinder designs 416 DC 3-/4-wire inductive standard sensors Cylinder designs Block designs 436 495 DC 2-wire inductive sensors Cylinder designs Block designs 535 546 AC/DC 2-wire inductive sensors Cylinder designs Block designs 554 563 AC 2-wire inductive sensors Cylinder designs Block designs 574 579 Inductive sensors with special properties High-pressure resistant sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostic sensors Large designs Ring sensors Hose sensors 583 600 606 612 616 626 638 646 652 654 656 Inductive Sensors for analog distance measurement Cylinder designs 662 Block designs 673 Accessories for inductive sensors Pulse extender Function diagnostics unit Tester, tester/programmer Analog switching devices Assembly aids for Uni and Unicompact sensors Protective coverings for Unicompact sensors Cover nuts Positive stop Tube switch Contact protectors Clamping holder overview 680 681 682 684 686 689 690 692 694 696 698 Basic information and definitions can be found on page 884. ■ www.balluff.com 409 Inductive Sensors Performance spectrum 3-/4-Wire 410 For more information, visit us online! Inductive Sensors Performance spectrum Inductive Sensors Performance spectrum Product overview Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories ■ www.balluff.com 411 Inductive Sensors Product overview Housing size Ø 3 mm, Ø 4 mm, M4×0.5 M5×0.5 Ø 6.5 mm, M8×1, Ø 8 mm M12×1 page 419 page 425 page 428 page 446 page 472 page 480 page 535 page 537 page 540 AC/DC 2-wire page 555 page 556 AC 2-wire page 574 page 576 Inductive standard sensors DC 3-wire Global DC 3-/4-wire page 437 page 442 DC 2-wire Inductive Sensors with Special Properties High pressure-rated sensors Ex sensors page 604 Steelface sensors page 607 page 612 page 612 page 613 page 616 page 618 page 628 page 630 page 639 page 641 page 647 page 647 page 663 page 667 page 612 page 591 Sensors for the food industry Factor 1 sensors page 627 Weld and magnetic field immune sensors Diagnostics sensors page 588 M18×1 page 583 page 585 page 592 page 600 page 602 page 608 Temperature-resistant sensors page 583 page 585 page 590 M16×1 page 590 page 599 page 601 page 605 page 609 Large design Hose sensors Ring sensors Inductive distance sensors for analog distance measurement Tubular-style housings page 662 Block designs Ring sensors 412 For more information, visit us online! Inductive Sensors Product overview M30×1.5 5×5 mm 8×8 mm 8×16 mm R04 10×30 mm R03 16.5×30 mm 20×32 mm R01 page 495 page 498 page 504 page 506 page 508 page 509 99x17.6 mm Inductive Sensors Performance spectrum Product overview page 431 page 489 Global DC 3-wire DC 3-/4-wire page 543 page 546 DC 2-wire page 559 AC/DC 2-wire page 577 AC 2-wire Special properties Analog distance measurement Accessories page 605 page 603 page 611 page 613 page 619 page 634 page 643 page 644 page 670 page 673 ■ www.balluff.com 413 Inductive Sensors Product overview Housing size 25×50 mm 26×26 mm 26×40 mm 42×48 mm 74×60.5 mm 40×40 mm Unicompact page 512 page 514 page 515 page 517 Inductive standard sensors DC 3-wire Global DC 3-/4-wire page 511 DC 2-wire page 547 AC/DC 2-wire page 548 page 563 page 565 AC 2-wire Inductive Sensors with Special Properties High pressure-rated sensors Ex sensors page 605 Steelface sensors Temperature-resistant sensors page 613 Sensors for the food industry Factor 1 sensors page 635 Weld and magnetic field immune sensors Diagnostics sensors page 645 page 647 Large design Hose sensors Ring sensors Inductive distance sensors for analog distance measurement Tubular-style housings Block designs Ring sensors 414 For more information, visit us online! Inductive Sensors Product overview 40x40 mm Unisensor 80×80 mm Maxisensor 35×35 mm Ø 80x67 mm Ø 110x110 mm Ring sensors Hose sensors Inductive Sensors Performance spectrum Product overview Global DC 3-wire page 521 page 528 page 549 page 550 page 564 page 571 DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire page 579 Special properties Analog distance measurement Accessories page 653 page 652 page 653 page 657 page 655 page 676 page 677 ■ www.balluff.com 415 Inductive Sensors DC 3-wire inductive Global Sensors DC 3-wire inductive global sensors: The complete series in the standard segment. Global sensors are the most economical sensors from the Balluff group. These standardized sensors are available at all times and fulfill most tasks excellently. 416 For more information, visit us online! DC 3-wire Inductive Global Sensors Contents Cylinder design Ø 6.5 mm M8×1 M12×1 M18×1 M30×1.5 419 420 425 428 431 Basic information and definitions can be found on page 884. ■ www.balluff.com 417 DC 3-wire Inductive Global Sensors Cylinder design Global: The complete series of standard sensors The inductive standard sensors are usually available ex warehouse, can be used globally, are globally standardized and have an optimum price-performance ratio. ■ Short and mid-size designs Ø 6.5 mm to M30×1.5 ■ Shielded and unshielded designs ■ Cable and connector versions ■ Standard and extended switching distance Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 418 For more information, visit us online! DC 3-wire Inductive Global Sensors Cylinder design, Ø 6.5 mm Ø6.5 LED Ø6.5 Ø 6.5 mm Not flush 4 mm 0...3.2 mm ŶŶ BES000F BES G06ED-PSC40F-BV02 BES000C BES G06ED-POC40F-BV02 BES0009 BES G06ED-NSC40F-BV02 BES0007 BES G06ED-NOC40F-BV02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 2 m PVC cable, 3×0.14 mm² Inductive sensors Global DC 3-wire Cylinder designs DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Ø6.5 5 Ø6.5 Ø 6.5 mm Not flush 4 mm 0...3.2 mm ŶŶ BES03P5 BES G06EH-PSC40F-S49G BES03T1 BES G06EH-POC40F-S49G BES03T2 BES G06EH-NSC40F-S49G BES03T3 BES G06EH-NOC40F-S49G 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 1.5 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT M8 connector, 3-pin LED M8x1 30 60 47 55 40 30 28 18 5 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 1.5 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT M8 connector, 3-pin Ø 6.5 mm Not flush 4 mm 0...3.2 mm ŶŶ BES0005 BES G06EB-PSC40F-S49G BES0004 BES G06EB-POC40F-S49G BES0003 BES G06EB-NSC40F-S49G BES0002 BES G06EB-NOC40F-S49G 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 1.5 kHz Yellow LED IP 67 CE, cULus Stainless steel PA 12 M8 connector, 3-pin 5 Ø6.5 Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES03P4 BES G06EH-PSC20B-S49G BES03RT BES G06EH-POC20B-S49G 43 Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES03R9 BES G06EE-PSC20B-S49G-003 BES03RY BES G06EE-POC20B-S49G-003 BES03RZ BES G06EE-NSC20B-S49G-003 BES03T0 BES G06EE-NOC20B-S49G-003 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 67 CE, cULus Stainless steel PBT M8 connector, 3-pin M8x1 LED LED LED M8x1 M8x1 ■ www.balluff.com 419 DC 3-wire Inductive Global Sensors Cylinder designs, M8×1 M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES003C BES M08MI-PSC15B-S49G BES03P6 BES M08MI-POC15B-S49G BES002K BES M08MI-NSC15B-S49G BES03PK BES M08MI-NOC15B-S49G 12...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 1 kHz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M8 connector, 3-pin M8x1 13 13 LED 28.5 43 Additional cable lengths and PUR cable jacket material available on request. M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES00CH BES M08EE-PSC15B-S04G-003 BES00CA BES M08EE-POC15B-S04G-003 BES00C6 BES M08EE-NSC15B-S04G-003 BES00C2 BES M08EE-NOC15B-S04G-003 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT M12 connector, 4-pin M8x1 29.5 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES00CJ BES M08EE-PSC15B-S49G-003 BES00CC BES M08EE-POC15B-S49G-003 BES00C7 BES M08EE-NSC15B-S49G-003 BES00C3 BES M08EE-NOC15B-S49G-003 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT M8 connector, 3-pin 40 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection LED M8x1 M12x1 420 For more information, visit us online! DC 3-wire Inductive Global Sensors Cylinder designs, M8×1 M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES0027 BES M08MH1-PSC15B-S04G BES0026 BES M08MH1-POC15B-S04G BES0024 BES M08MH1-NSC15B-S04G BES0023 BES M08MH1-NOC15B-S04G 12...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 1 kHz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES00CU BES M08EF-PSC15B-BP02-003 BES00CR BES M08EF-POC15B-BP02-003 BES00CN BES M08EF-NSC15B-BP02-003 BES00CL BES M08EF-NOC15B-BP02-003 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT 2 m PUR cable, 3×0.14 mm² M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES0037 BES M08MI-PSC15B-BV02 BES0030 BES M08MI-POC15B-BV02 BES002F BES M08MI-NSC15B-BV02 BES03PJ BES M08MI-NOC15B-BV02 12...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 1 kHz Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.14 mm² M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES00CK BES M08EE-PSC20B-S49G-003 BES00CF BES M08EE-POC20B-S49G-003 BES00C9 BES M08EE-NSC20B-S49G-003 BES00C5 BES M08EE-NOC20B-S49G-003 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 67 CE, cULus Stainless steel PBT M8 connector, 3-pin M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES00FC BES M08EE-PSC20B-S04G-003 BES00CE BES M08EE-POC20B-S04G-003 BES00C8 BES M08EE-NSC20B-S04G-003 BES00C4 BES M08EE-NOC20B-S04G-003 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 67 CE, cULus Stainless steel PBT M12 connector, 4-pin M8x1 M8x1 Inductive sensors Global DC 3-wire Cylinder designs DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories M8x1 13 13 LED 28.5 43 29.5 LED 40 40 13 LED M8x1 M12x1 ■ www.balluff.com 421 DC 3-wire Inductive Global Sensors Cylinder designs, M8×1 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES003P BES M08MI-PSC20B-S49G BES0033 BES M08MI-POC20B-S49G BES002U BES M08MI-NSC20B-S49G BES03TJ BES M08MI-NOC20B-S49G 12...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M8 connector, 3-pin M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES0028 BES M08MH1-PSC20B-S04G BES03T5 BES M08MH1-POC20B-S04G BES0025 BES M08MH1-NSC20B-S04G BES03T6 BES M08MH1-NOC20B-S04G 12...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES045P BES M08EF-NSC20B-BP00,3-GS49 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M8x1 Additional cable lengths and PUR cable jacket material available on request. 13 37 40 M8x1 LED 422 For more information, visit us online! DC 3-wire Inductive Global Sensors Cylinder designs, M8×1 M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES003K BES M08MI-PSC20B-BV02 BES03TH BES M08MI-POC20B-BV02 BES002P BES M08MI-NSC20B-BV02 BES03TF BES M08MI-NOC20B-BV02 12...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.14 mm² M8 × 1 Not flush 4 mm 0...3.2 mm ŶŶ BES000M BES M08EB-PSC40F-S49G BES000L BES M08EB-POC40F-S49G BES000K BES M08EB-NSC40F-S49G BES000J BES M08EB-NOC40F-S49G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT M8 connector, 3-pin M8 × 1 Not flush 4 mm 0...3.2 mm ŶŶ BES001J BES M08EH-PSC40F-S49G BES001F BES M08EH-POC40F-S49G BES001C BES M08EH-NSC40F-S49G BES0019 BES M08EH-NOC40F-S49G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT M8 connector, 3-pin M8x1 M8x1 13 13 DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 46 60 50 40 M12x1 Global DC 3-wire Cylinder designs M8x1 Ø14.5 13 Inductive sensors 5 12...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 0.2 m PUR cable with M12 connector, 4-pin M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES00CW BES M08EF-PSC20B-BP02-003 BES00CT BES M08EF-POC20B-BP02-003 BES00CP BES M08EF-NSC20B-BP02-003 BES00CM BES M08EF-NOC20B-BP02-003 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 67 CE, cULus Stainless steel PBT 2 m PUR cable, 3×0.14 mm² 49 M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES003E BES M08MI-PSC20B-BP00,2-GS04 LED LED LED M8x1 ■ www.balluff.com 423 DC 3-wire Inductive Global Sensors Cylinder designs, M8×1 M8 × 1 Not flush 4 mm 0...3.2 mm ŶŶ BES001H BES M08EH-PSC40F-S04G BES001E BES M08EH-POC40F-S04G BES001A BES M08EH-NSC40F-S04G BES0018 BES M08EH-NOC40F-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1.5 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M8 × 1 Not flush 4 mm 0...3.2 mm ŶŶ BES000Z BES M08ED-PSC40F-BV02 BES000W BES M08ED-POC40F-BV02 BES000T BES M08ED-NSC40F-BV02 BES000P BES M08ED-NOC40F-BV02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 2 m PVC cable, 3×0.14 mm² M8 × 1 Not flush 4 mm 0...3.2 mm ŶŶ BES0017 BES M08EG-PSC40F-BV02 BES0015 BES M08EG-POC40F-BV02 BES0013 BES M08EG-NSC40F-BV02 BES0011 BES M08EG-NOC40F-BV02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 2 m PVC cable, 3×0.14 mm² M8x1 13 5 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 65.5 51 Additional cable lengths and PUR cable jacket material available on request. LED M12x1 424 For more information, visit us online! DC 3-wire Inductive Global Sensors Cylinder design, M12×1 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES0060 BES M12MI-PSC20B-S04G BES005F BES M12MI-POC20B-S04G BES0054 BES M12MI-NSC20B-S04G BES004Y BES M12MI-NOC20B-S04G 12...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1.2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M12×1 Flush 2 mm 0...1.6 mm Ŷ BES00E4 BES M12MD-PSC20B-BP02-003 BES00E2 BES M12MD-POC20B-BP02-003 BES00E0 BES M12MD-NSC20B-BP02-003 BES00CY BES M12MD-NOC20B-BP02-003 10...30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1.2 kHz Yellow LED IP 67 CE, cULus Brass-coated PBT 2 m PUR cable, 3×0.34 mm² M12×1 Flush 2 mm 0...1.6 mm Ŷ BES005U BES M12MI-PSC20B-BV02 BES00FP BES M12MI-POC20B-BV02 BES00FL BES M12MI-NSC20B-BV02 BES03PR BES M12MI-NOC20B-BV02 12...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1.2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES00EF BES M12ME-PSC40B-S04G-003 BES00EC BES M12ME-POC40B-S04G-003 BES00E9 BES M12ME-NSC40B-S04G-003 BES00E7 BES M12ME-NOC40B-S04G-003 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 300 Hz Yellow LED IP 67 CE, cULus Brass-coated LCP M12 connector, 4-pin Inductive sensors Global DC 3-wire Cylinder designs DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories M12x1 M12x1 17 45 30 33 17 30 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES00EE BES M12ME-PSC20B-S04G-003 BES00EA BES M12ME-POC20B-S04G-003 BES00E8 BES M12ME-NSC20B-S04G-003 BES00E6 BES M12ME-NOC20B-S04G-003 10...30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1.2 kHz Yellow LED IP 67 CE, cULus Brass-coated PBT M12 connector, 4-pin LED LED M12x1 ■ www.balluff.com 425 DC 3-wire Inductive Global Sensors Cylinder design, M12×1 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES0068 BES M12MI-PSC40B-S04G BES005N BES M12MI-POC40B-S04G BES0059 BES M12MI-NSC40B-S04G BES004Z BES M12MI-NOC40B-S04G 12...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 500 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES00E5 BES M12MD-PSC40B-BP02-003 BES00E3 BES M12MD-POC40B-BP02-003 BES00E1 BES M12MD-NSC40B-BP02-003 BES00CZ BES M12MD-NOC40B-BP02-003 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 300 Hz Yellow LED IP 67 CE, cULus Brass-coated LCP 2 m PUR cable, 3×0.34 mm² M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES0064 BES M12MI-PSC40B-BV02 BES005L BES M12MI-POC40B-BV02 BES00FM BES M12MI-NSC40B-BV02 BES03PT BES M12MI-NOC40B-BV02 12...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 500 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² M12x1 17 30 Additional cable lengths and PUR cable jacket material available on request. 33 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection LED 426 For more information, visit us online! DC 3-wire Inductive Global Sensors Cylinder design, M12×1 M12×1 Not flush 8 mm 0...6.4 mm ŶŶ BES01PY BES M12MD-PSC80F-S04G BES01PU BES M12MD-POC80F-S04G BES01PT BES M12MD-NSC80F-S04G BES01PR BES M12MD-NOC80F-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 800 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PBT M12 connector, 4-pin ■ www.balluff.com M12×1 Not flush 8 mm 0...6.4 mm ŶŶ BES004N BES M12MG-PSC80F-S04G BES004K BES M12MG-POC80F-S04G BES004F BES M12MG-NSC80F-S04G BES004A BES M12MG-NOC80F-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 800 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT M12 connector, 4-pin M12×1 Not flush 8 mm 0...6.4 mm ŶŶ BES004M BES M12MG-PSC80F-BV02 BES004J BES M12MG-POC80F-BV02 BES004E BES M12MG-NSC80F-BV02 BES0049 BES M12MG-NOC80F-BV02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 800 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT 2 m PVC cable, 3×0.34 mm² Inductive sensors Global DC 3-wire Cylinder designs DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 427 DC 3-wire Inductive Global Sensors Cylinder design, M18×1 Additional cable lengths and PUR cable jacket material available on request. M18×1 Flush 5 mm 0...4 mm Ŷ BES0086 BES M18MI-PSC50B-S04G BES043J BES M18MI-POC50B-S04G 12...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M18×1 Flush 5 mm 0...4 mm Ŷ BES00EN BES M18MD-PSC50B-BP02-003 BES00EL BES M18MD-POC50B-BP02-003 BES00EJ BES M18MD-NSC50B-BP02-003 BES03T8 BES M18MD-NOC50B-BP02-003 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PUR cable, 3×0.34 mm² M18x1 24 29.5 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M18×1 Flush 5 mm 0...4 mm Ŷ BES00EY BES M18ME-PSC50B-S04G-003 BES00EU BES M18ME-POC50B-S04G-003 BES00ER BES M18ME-NSC50B-S04G-003 BES03T7 BES M18ME-NOC50B-S04G-003 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin 44.5 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection LED M12x1 428 For more information, visit us online! DC 3-wire Inductive Global Sensors Cylinder design, M18×1 M18×1 Flush 5 mm 0...4 mm Ŷ BES0082 BES M18MI-PSC50B-BV02 BES007R BES M18MI-POC50B-BV02 BES007A BES M18MI-NSC50B-BV02 BES03RR BES M18MI-NOC50B-BV02 12...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 700 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES00EZ BES M18ME-PSC80B-S04G-003 BES00EW BES M18ME-POC80B-S04G-003 BES00ET BES M18ME-NSC80B-S04G-003 BES03RN BES M18ME-NOC80B-S04G-003 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...70 °C 150 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT M12 connector, 4-pin M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES008L BES M18MI-PSC80B-S04G BES03RP BES M18MI-POC80B-S04G BES007L BES M18MI-NSC80B-S04G BES0077 BES M18MI-NOC80B-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 1 kHz Yellow LED IP 67 CE, cULus Brass-coated PBT M12 connector, 4-pin M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES00EP BES M18MD-PSC80B-BP02-003 BES00EM BES M18MD-POC80B-BP02-003 BES00EK BES M18MD-NSC80B-BP02-003 BES00EH BES M18MD-NOC80B-BP02-003 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...70 °C 150 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT 2 m PUR cable, 3×0.34 mm² M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES008E BES M18MI-PSC80B-BV02 BES03PY BES M18MI-POC80B-BV02 BES00FE BES M18MI-NSC80B-BV02 BES03T4 BES M18MI-NOC80B-BV02 12...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 150 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² Inductive sensors Global DC 3-wire Cylinder designs DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories M18x1 29.5 44.5 24 LED M12x1 ■ www.balluff.com 429 DC 3-wire Inductive Global Sensors Cylinder design, M18×1 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M18×1 Not flush 16 mm 0...13 mm ŶŶ BES03RM BES M18MG-PSC16F-S04G BES03RL BES M18MG-POC16F-S04G 10...30 V DC 2.5 V 75 V DC ([) 200 mA Yes/Yes/Yes –25...70 °C 800 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M18×1 Not flush 16 mm 0...13 mm ŶŶ BES006Z BES M18MG-PSC16F-BV02 BES006U BES M18MG-POC16F-BV02 BES006P BES M18MG-NSC16F-BV02 BES006L BES M18MG-NOC16F-BV02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 800 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT 2 m PVC cable, 3×0.34 mm² 10 M18x1 24 65 50 Additional cable lengths and PUR cable jacket material available on request. LED M12x1 430 For more information, visit us online! DC 3-wire Inductive Global Sensors Cylinder design, M30×1.5 M30×1.5 Flush 10 mm 0...8 mm Ŷ BES00F8 BES M30ME-PSC10B-S04G-003 BES00F6 BES M30ME-POC10B-S04G-003 BES00F5 BES M30ME-NSC10B-S04G-003 BES03TA BES M30ME-NOC10B-S04G-003 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...70 °C 150 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES00A4 BES M30MI-PSC10B-S04K BES009P BES M30MI-POC10B-S04K BES009H BES M30MI-NSC10B-S04K BES0097 BES M30MI-NOC10B-S04K 12...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 400 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES00A3 BES M30MI-PSC10B-S04G BES043H BES M30MI-POC10B-S04G 12...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...70 °C 400 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES00F3 BES M30MD-PSC10B-BP02-003 BES03TC BES M30MD-POC10B-BP02-003 BES00F0 BES M30MD-NSC10B-BP02-003 BES03TE BES M30MD-NOC10B-BP02-003 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...70 °C 150 Hz Yellow LED IP67 CE, cULus Brass-coated PA 12 2 m PUR cable, 3×0.34 mm² Inductive sensors Global DC 3-wire Cylinder designs DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories M30x1.5 M30x1.5 M30x1.5 M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES00A0 BES M30MI-PSC10B-BV02 BES009M BES M30MI-POC10B-BV02 BES009C BES M30MI-NSC10B-BV02 BES0096 BES M30MI-NOC10B-BV02 12...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 400 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² 30 50.5 65 30 44.5 36 36 36 36 LED M12x1 LED LED M12x1 ■ www.balluff.com 431 DC 3-wire Inductive Global Sensors Cylinder design, M30×1.5 10...30 V DC 3.5 V 75 DC 130 mA Yes/Yes/Yes –25...70 °C 75 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M30×1.5 Flush 15 mm 0...12.2 mm ŶŶ BES00AH BES M30MI-PSC15B-S04K BES009U BES M30MI-POC15B-S04K BES009J BES M30MI-NSC15B-S04K BES0098 BES M30MI-NOC15B-S04K 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 100 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M30×1.5 Flush 15 mm 0...12.2 mm ŶŶ BES00AF BES M30MI-PSC15B-S04G BES03RK BES M30MI-POC15B-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 100 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M30x1.5 M30x1.5 36 30 Additional cable lengths and PUR cable jacket material available on request. 36 50 65 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES00F9 BES M30ME-PSC15B-S04G-003 BES00F7 BES M30ME-POC15B-S04G-003 44.5 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection LED M12x1 LED M12x1 432 For more information, visit us online! DC 3-wire Inductive Global Sensors Cylinder design, M30×1.5 M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES00F4 BES M30MD-PSC15B-BP02-003 BES00F2 BES M30MD-POC15B-BP02-003 BES00F1 BES M30MD-NSC15B-BP02-003 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...70 °C 75 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PUR cable, 3×0.34 mm² M30×1.5 Flush 15 mm 0...12.2 mm ŶŶ BES00AA BES M30MI-PSC15B-BV02 BES009T BES M30MI-POC15B-BV02 BES03RH BES M30MI-NSC15B-BV02 BES03RJ BES M30MI-NOC15B-BV02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 100 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² M30×1.5 Not flush 30 mm 0...24 mm ŶŶ BES00AZ BES M30MM-PSC30F-S04K BES00AU BES M30MM-POC30F-S04K BES00AP BES M30MM-NSC30F-S04K BES00AL BES M30MM-NOC30F-S04K 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 300 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT M12 connector, 4-pin M30×1.5 Not flush 30 mm 0...24 mm ŶŶ BES03RE BES M30MM-PSC30F-S04G BES03RC BES M30MM-POC30F-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 300 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT M12 connector, 4-pin M30×1.5 Not flush 30 mm 0...24 mm ŶŶ BES00AY BES M30MM-PSC30F-BV02 BES00AT BES M30MM-POC30F-BV02 BES00AN BES M30MM-NSC30F-BV02 BES00AK BES M30MM-NOC30F-BV02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 300 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT 2 m PVC cable, 3×0.34 mm² Inductive sensors Global DC 3-wire Cylinder designs DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories M30x1.5 M30x1.5 36 83 67 30 36 13 36 LED LED M12x1 ■ www.balluff.com 433 Inductive Sensors DC 3-/4-wire inductive standard sensors Our standard product line in 3- and 4-wire DC technology Balluff offers something for everyone with this comprehensive product line of sensors from Ø 3 mm to 80×80 mm for practically every application in 0automation. These high-quality sensors are designed and manufactured according to worldwide standards and the latest technology. Our 100 % final inspection of all products guarantees that only carefully tested sensors leave our plants. 434 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Contents Cylinder designs Ø 3 mm Ø 4 mm M4×0.5 M5×0.5 Ø 6.5 mm Ø 8 mm M8×1 M12×1 M18×1 M30×1.5 436 438 441 442 446 454 455 472 480 489 Block designs 5×5 mm 8×8 mm 8×16×4 mm (R04) 10×30×6 mm (R03) 30×20×10 mm 16×30×10 mm 20×32×8 mm (R01) 20×50×10 mm 26×40×12 mm (R05) 42×48×22 mm 74×60.5×28 mm 40×40 mm (Unicompact) 40×40 mm (Unisensor) 80×80 mm (Maxisensor) 495 498 504 506 507 508 509 511 512 514 515 516 520 528 Basic information and definitions can be found on page 884. ■ www.balluff.com 435 DC 3-/4-wire Inductive Standard Sensors Inductive mini-sensors High-performance and compact Inductive mini-sensors guarantee position sensing in rough environments, and stand out due to an optimum price/performance ratio. They are easy to install and can be fully integrated even in narrow assemblies such as linear units, valves and actuators. As a result, position sensing is now possible where there was never space for a sensor before. Modules can be made even smaller. The low weight of the mini-sensors allows applications with extremely fast acceleration, so that pick-and-place is easy to manage. Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. SuperShorties and slim designs Inductive mini sensors are available with especially small diameter: with 3 mm, 4 mm and 5 mm. And they are available as compact SuperShorties with a housing length of just 6 mm. They are the shortest inductive sensors on the market. ■ The most compact on the market: can be fully integrated ■ Unmatched in thinness and, as SuperShorty, unmatched in their short length ■ Low weight (0.7 g) for extreme accelerations 436 DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder designs, Ø 3 mm 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel POM 0.3 m PUR cable with M8 connector, 3-pin 23 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel POM 0.3 m PUR cable with M5 connector, 4-pin ■ www.balluff.com Ø 3 mm Flush 1 mm 0...0.8 mm ŶŶ BES00M5 BES 516-3044-G-E4-C-S49-00,3 BES0415 BES G03ED-POC10B-EP00,3-GS49 Ø 3 mm Flush 1 mm 0...0.8 mm ŶŶ BES00M3 BES 516-3044-G-E4-C-PU-02 BES00M7 BES 516-3045-G-E4-C-PU-02 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel POM 2 m PUR cable, 3×0.1 mm² Ø 3 mm Flush 1 mm 0...0.8 mm ŶŶ BES00M9 BES 516-3046-G-E4-L-PU-02 10...30 V DC 1.5 V 75 V DC 100 mA Yes/Yes/No 0...+70 °C 5 kHz Yellow LED IP 67 CE Narrow design Stainless steel POM 2 m PUR cable, 3×0.1 mm² Ø 3 mm Not flush 3 mm 0...2.3 mm ŶŶ BES00MH BES 516-3048-G-E4-C-S26-00,3 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire 21.6...26.4 V DC 2.5 V 75 V DC 50 mA Yes/Yes/Yes 0...+70 °C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PET-C 0.3 m PUR cable with M5 connector, 4-pin AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories 23 Ø 3 mm Flush 1 mm 0...0.8 mm ŶŶ BES0468 BES 516-3044-G-E4-C-S26-00,3 437 DC 3-/4-wire Inductive Standard Sensors Cylinder design, Ø 3 mm, Ø 4 mm TRIPLEPROX Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection Ø 3 mm Not flush 3 mm 0...2.3 mm ŶŶŶ BES00ME BES 516-3048-G-E4-C-PU-02 BES00MJ BES 516-3049-G-E4-C-PU-02 21.6...26.4 V DC 2.5 V 75 V DC 50 mA Yes/Yes/Yes 0...+70 °C 3 kHz Yellow LED IP 67 CE, cULus Narrow design, large switching distance Stainless steel PET-C 2 m PUR cable, 3×0.1 mm² Ø 4 mm Flush 0.8 mm 0...0.65 mm Ŷ BES0122 BES G04EC-PSC08B-S26G BES0120 BES G04EC-POC08B-S26G BES011Y BES G04EC-NSC08B-S26G BES011W BES G04EC-NOC08B-S26G 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Ø 4 mm Flush 0.8 mm 0...0.65 mm Ŷ BES00J5 BES 516-3007-E5-C-S49 BES00K4 BES 516-3017-E5-C-S49 Stainless steel PBT M5 connector, 4-pin Stainless steel PBT M8 connector, 3-pin BES00KF BES 516-3018-E5-C-S49 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 438 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Ø 4 mm Flush 0.8 mm 0...0.65 mm Ŷ BES00J3 BES 516-3007-E4-C-S49-00,3 BES00K3 BES 516-3017-E4-C-S49-00,3 Cylinder designs, Ø 4 mm Ø 4 mm Flush 0.8 mm 0...0.65 mm Ŷ BES00J0 BES 516-3007-E4-C-S4-00,3 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin Stainless steel PBT 0.3 m PUR cable with M12 connector, 4-pin Ø 4 mm Flush 0.8 mm 0...0.65 mm Ŷ BES00HW BES 516-3007-E4-C-PU-02 BES00K1 BES 516-3017-E4-C-PU-02 BES00JP BES 516-3008-E4-C-PU-02 BES00KC BES 516-3018-E4-C-PU-02 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Ø 4 mm Flush 1.5 mm 0...1.2 mm ŶŶ BES012F BES G04ED-PSC15B-S26G BES012A BES G04ED-POC15B-S26G BES0126 BES G04ED-NSC15B-S26G BES0123 BES G04ED-NOC15B-S26G 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Ø 4 mm Flush 1.5 mm 0...1.2 mm ŶŶ BES00JN BES 516-3007-G-E5-C-S49 BES00KA BES 516-3017-G-E5-C-S49 BES00K0 BES 516-3008-G-E5-C-S49 BES00KK BES 516-3018-G-E5-C-S49 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT 2 m PUR cable, 3×0.14 mm² Stainless steel PBT M5 connector, 4-pin Stainless steel PBT M8 connector, 3-pin Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories 27 Ø4 50 LED M12x1 mini.s Mini design – Maximum power Ø 3 mm inductive sensors: Large switching distance with the smallest installation space. For even more function reserve and flexibility in application. ■ www.balluff.com 439 DC 3-/4-wire Inductive Standard Sensors Cylinder design, Ø 4 mm Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Ø 4 mm Flush 1.5 mm 0...1.2 mm ŶŶ BES00J8 BES 516-3007-G-E4-C-S26-00,2 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 1.8 kHz Yellow LED IP 67 CE, cULus Narrow design Material Stainless steel PBT 0.2 m PUR cable with M5 connector, 4-pin Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin Housing Sensing surface Connection Ø 4 mm Flush 1.5 mm 0...1.2 mm ŶŶ BES00JJ BES 516-3007-G-E4-C-S49-00,3 BES00K9 BES 516-3017-G-E4-C-S49-00,3 Ø 4 mm Flush 1.5 mm 0...1.2 mm ŶŶ BES0156 BES 516-3008-G-E4-C-S49-PU-00.3 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 4 45 23 27 Additional cable lengths and PUR cable jacket material available on request. M8x1 440 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder designs, Ø 4 mm, M4×0.5 Ø 4 mm Flush 1.5 mm 0...1.2 mm ŶŶ BES00JA BES 516-3007-G-E4-C-S4-00,3 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT 0.3 m PUR cable with M12 connector, 4-pin Ø 4 mm Flush 1.5 mm 0...1.2 mm ŶŶ BES00J6 BES 516-3007-G-E4-C-PU-02 BES00K5 BES 516-3017-G-E4-C-PU-02 BES00JW BES 516-3008-G-E4-C-PU-02 BES00KH BES 516-3018-G-E4-C-PU-02 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT 2 m PUR cable, 3×0.14 mm² TRIPLEPROX TRIPLEPROX Ø 4 mm Not flush 5 mm 0...4 mm ŶŶŶ BES012K BES G04ED-PSC50F-S26G BES012E BES G04ED-POC50F-S26G BES0129 BES G04ED-NSC50F-S26G BES0125 BES G04ED-NOC50F-S26G 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design, large switching distance Stainless steel PET-C M5 connector, 4-pin Ø 4 mm Not flush 5 mm 0...4 mm ŶŶŶ BES012H BES G04ED-PSC50F-EP02 BES0127 BES G04ED-NSC50F-EP02 M4×0.5 Flush 0.6 mm 0...0.42 mm Ŷ BES01P0 BES M04EC-PSD06B-BP02 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design, large switching distance Stainless steel PET-C 2 m PUR cable, 3×0.14 mm² 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 2 kHz No IP 67 CE, cULus Narrow design AC 2-wire Analog distance measurement Special properties Special accessories Stainless steel POM 2 m PUR cable, 3×0.1 mm² Ø4 M4x0.5 27 22 6 50 LED M12x1 ■ www.balluff.com 441 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M5×0.5 M5×0.5 Flush 0.8 mm 0...0.65 mm Ŷ BES00H2 BES 516-3005-E5-C-S49 BES00L1 BES 516-3022-E5-C-S49 BES00HL BES 516-3006-E5-C-S49 BES00L8 BES 516-3023-E5-C-S49 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT M8 connector, 3-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M5×0.5 Flush 0.8 mm 0...0.65 mm Ŷ BES00H1 BES 516-3005-E4-C-S49-00,3 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin 20 M5x0.5 Additional cable lengths and PUR cable jacket material available on request. 7 41 M5×0.5 Flush 0.8 mm 0...0.65 mm Ŷ BES012Z BES M05EC-PSC08B-S26G BES012Y BES M05ECa-POC08B-S26G BES012W BES M05EC-NSC08B-S26G BES012U BES M05EC-NOC08B-S26G 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT M5 connector, 4-pin 32 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection LED M8x1 442 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, M5×0.5 M5×0.5 Flush 0.8 mm 0...0.65 mm Ŷ BES00FW BES 516-3005-E4-C-S4-00,3 27 24 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT 0.3 m PUR cable with M12 connector, 4-pin M5×0.5 Flush 0.8 mm 0...0.65 mm Ŷ BES00FT BES 516-3005-E4-C-PU-02 BES00KZ BES 516-3022-E4-C-PU-02 BES00HJ BES 516-3006-E4-C-PU-02 BES00L6 BES 516-3023-E4-C-PU-02 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT 2 m PUR cable, 3×0.14 mm² M5×0.5 Flush 1.5 mm 0...1.2 mm ŶŶ BES013A BES M05ED-PSC15B-S26G BES0137 BES M05ED-POC15B-S26G BES0133 BES M05ED-NSC15B-S26G BES0130 BES M05ED-NOC15B-S26G 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT M5 connector, 4-pin M5×0.5 Flush 1.5 mm 0...1.2 mm ŶŶ BES00HF BES 516-3005-G-E5-C-S49 M5×0.5 Flush 1.5 mm 0...1.2 mm ŶŶ BES00H5 BES 516-3005-G-E4-C-S26-00,3 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT M8 connector, 3-pin AC 2-wire 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT 0.3 m PUR cable with M5 connector, 4-pin Analog distance measurement Special properties Special accessories 50 M5x0.5 ■ www.balluff.com 443 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M5×0.5 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties M5×0.5 Flush 1.5 mm 0...1.2 mm ŶŶ BES00HC BES 516-3005-G-E4-C-S49-00,3 BES00L4 BES 516-3022-G-E4-C-S49-00,3 M5×0.5 Flush 1.5 mm 0...1.2 mm ŶŶ BES00H7 BES 516-3005-G-E4-C-S4-00,3 M5×0.5 Flush 1.5 mm 0...1.2 mm ŶŶ BES00H3 BES 516-3005-G-E4-C-PU-02 BES00L2 BES 516-3022-G-E4-C-PU-02 BES00HM BES 516-3006-G-E4-C-PU-02 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Material Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin Stainless steel PBT 0.3 m PUR cable with M12 connector, 4-pin Stainless steel PBT 2 m PUR cable, 3×0.14 mm² Housing Sensing surface Connection 50 Additional cable lengths and PUR cable jacket material available on request. 27 24 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 444 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, M5×0.5 TRIPLEPROX TRIPLEPROX TRIPLEPROX M5×0.5 Not flush 5 mm 0...4 mm ŶŶŶ BES013H BES M05ED-PSC50F-S26G BES0139 BES M05ED-POC50F-S26G BES0136 BES M05ED-NSC50F-S26G BES0132 BES M05ED-NOC50F-S26G 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design, large switching distance Stainless steel PET-C M5 connector, 4-pin M5×0.5 Not flush 5 mm 0...4 mm ŶŶŶ BES013C BES M05ED-PSC50F-EP00,3-GS04 M5×0.5 Not flush 5 mm 0...4 mm ŶŶŶ BES013E BES M05ED-PSC50F-EP02 BES0134 BES M05ED-NSC50F-EP02 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire 10...30 V DC 2.5 V 75 V DC 100 mA No/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design, large switching distance Stainless steel PET-C 0.3 m PUR cable with M12 connector, 4-pin 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design, large switching distance Stainless steel PET-C 2 m PUR cable, 3×0.14 mm² AC 2-wire Analog distance measurement Special properties Special accessories M5x0.5 35 7 50 LED M12x1 ■ www.balluff.com 445 DC 3-/4-wire Inductive Standard Sensors Cylinder design, Ø 6.5 mm SUPERSHORTIES Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES00ZC BES 516-371-E5-C-S49 Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES01KJ BES 516-371-S49-C 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT M8 connector, 3-pin Stainless steel PBT M8 connector, 3-pin Ø6.5 43 Additional cable lengths and PUR cable jacket material available on request Ø6.5 11.25 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES025N BES G06EA-PSD15B-S49G BES025J BES G06EA-POD15B-S49G BES025F BES G06EA-NSD15B-S49G BES025A BES G06EA-NOD15B-S49G 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz No IP 67 CE, cULus Short design Stainless steel PBT M8 connector, 3-pin 18 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection 55 M8x1 LED M8x1 SuperShorties monitor the function of a pneumatic stepping motor. 446 For more inform information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, Ø 6.5 mm SUPERSHORTIES SUPERSHORTIES Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES0253 BES G06E60-PSC15B-EP00,3-GS26 Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES0254 BES G06E60-PSC15B-EP00,3-GS49 SUPERSHORTIES Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES00ZA BES 516-371-E4-C-S49-00,3 Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES00Z8 BES 516-371-E4-C-S4-00,3 BES024Y BES G06E60-NSC15B-EP00,3-GS49 LED 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin Stainless steel PBT 0.3 m PUR cable with M12 connector, 4-pin Ø6.5 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories Ø6.5 6 LED 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 30 Ø6.5 6 0.35 Ø6.5 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin 6 0.35 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 0.3 m PUR cable with M5 connector, 4-pin Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES0256 BES G06E60-PSC15B-EP02 BES0251 BES G06E60-POC15B-EP02 BES024Z BES G06E60-NSC15B-EP02 BES024W BES G06E60-NOC15B-EP02 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 2 m PUR cable, 3×0.073 mm² LED 30 LED M8x1 41.5 M5x0.5 M12x1 ■ www.balluff.com 447 DC 3-/4-wire Inductive Standard Sensors Cylinder design, Ø 6.5 mm SUPERSHORTIES SUPERSHORTIES Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES026F BES K06K60-PSC15B-EP02 BES026E BES K06K60-POC15B-EP02 BES026C BES K06K60-NSC15B-EP02 BES026A BES K06K60-NOC15B-EP02 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 65 CE, cULus short design PBT PBT 2 m PUR cable, 3×0.073 mm² Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES0269 BES K06K40-PSC15B-FP02 BES0262 BES K06K40-POC15B-FP02 BES0261 BES K06K40-NSC15B-FP02 BES0260 BES K06K40-NOC15B-FP02 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 65 CE, cULus short design PBT PBT 2 m PUR cable, 3×0.073 mm² Ø6.5 10 Additional cable lengths and PUR cable jacket material available on request. Ø6.5 Ø6.5 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 SUPERSHORTIES Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES025M BES G06EA-PSC15B-EP02 BES025H BES G06EA-POC15B-EP02 BES025E BES G06EA-NSC15B-EP02 BES0259 BES G06EA-NOC15B-EP02 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 2 m PUR cable, 3×0.073 mm² 6 6 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection LED LED LED Features ■ Simple installation with glue-in sensor ■ Flexible use with optional radial cable outlet Recommendation for gluing in the sensor Ø 6.5 mm smooth: Prepare and clean drill hole and sensor according to the specifications of the glue used. Coat hole and sensor with adhesive and position sensor in hole. Allow to cure. For additional instructions, see the data sheet. 448 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, Ø 6.5 mm SUPERSHORTIES Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES00Z2 BES 516-371-E4-C-02 Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES00Z5 BES 516-371-E4-C-PU-02 Ø 6.5 mm Flush 1.5 mm 0...1.2 mm Ŷ BES01K7 BES 516-371-EO-C-02 Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES037K BES 516-371-SA15-C-S49 BES025K BES G06EA-POD20B-S49G BES00ZW BES 516-372-E4-C-02 BES0100 BES 516-372-E4-C-PU-02 BES01L1 BES 516-372-EO-C-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 2 m PVC cable, 3×0.14 mm² Stainless steel PBT 2 m PUR cable, 3×0.14 mm² Stainless steel PBT 2 m PVC cable, 3×0.14 mm² Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire BES025C BES G06EA-NOD20B-S49G 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz No IP 67 CE, cULus short design Stainless steel PBT M8 connector, 3-pin AC/DC 2-wire 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 67 CE, cULus AC 2-wire Analog distance measurement Special properties Special accessories Stainless steel PBT M8 connector, 3-pin 11.25 18 Ø6.5 M8x1 SuperShorties in electronics production: SMT placement equipment ■ www.balluff.com 449 DC 3-/4-wire Inductive Standard Sensors Cylinder design, Ø 6.5 mm SUPERSHORTIES Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES01KH BES 516-371-G-S49-C 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 67 CE, cULus BES03RU BES G06EH-NSC20B-S49G BES03RW BES G06EH-NOC20B-S49G 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT M8 connector, 3-pin Stainless steel PBT M8 connector, 3-pin Ø6.5 Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES0257 BES G06E60-PSC20B-EP00,3-GS49 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin Ø6.5 6 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES00ZU BES 516-371-G-E5-C-S49 BES00KY BES 516-3021-G-E5-C-S49 BES0107 BES 516-372-G-E5-C-S49 0.35 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection Additional cable lengths and PUR cable jacket material available on request. 55 43 LED LED M8x1 M8x1 450 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES00ZR BES 516-371-G-E4-C-S49-00,3 BES03F8 BES 516-3021-G-E4-C-S49-00,3 BES0106 BES 516-372-G-E4-C-S49-00,3 Cylinder design, Ø 6.5 mm Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES00ZN BES 516-371-G-E4-C-S4-00,2 BES00KU BES 516-3021-G-E4-C-S4-00,2 SUPERSHORTIES SUPERSHORTIES Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES0258 BES G06E60-PSC20B-EP02 Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES03ZA BES G06K40-PSC20B-FP02 Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES01KW BES 516-371-SA13-PU-02 BES0250 BES G06E60-NSC20B-EP02 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin Stainless steel PBT 0.2 m PUR cable with M12 connector, 4-pin Ø6.5 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 65 CE, cULus short design PBT PBT 2 m PUR cable, 3×0.073 mm² 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 2 kHz No IP 65 CE AC 2-wire Analog distance measurement Special properties Special accessories Stainless steel PBT 2 m PUR cable, 3×0.14 mm² 6 30 6 Ø6.5 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 2 m PUR cable, 3×0.073 mm² Ø6.5 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus LED LED 41.5 LED M12x1 ■ www.balluff.com Features ■ Simple installation with glue-in sensor ■ Flexible use with optional radial cable outlet Recommendation for preparing cleaning for gluing in the sensor Ø 6.5 mm smooth drill hole and sensor according to the specifications of the glue used. Coat hole and sensor with adhesive and position sensor in hole. Allow to cure. For additional instructions see data sheet. 451 DC 3-/4-wire Inductive Standard Sensors Cylinder design, Ø 6.5 mm Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection Ø 6.5 mm Flush 2 mm 0...1.6 mm ŶŶ BES00ZF BES 516-371-G-E4-C-02 BES00KP BES 516-3021-G-E4-C-02 BES0102 BES 516-372-G-E4-C-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 2 m PVC cable, 3×0.14 mm² TRIPLEPROX TRIPLEPROX Ø 6.5 mm Quasi-flush 3 mm 0...2.4 mm ŶŶŶ BES02UY BES G06MI-PSC30B-S49G BES02UW BES G06MI-POC30B-S49G BES02UU BES G06MI-NSC30B-S49G BES02UT BES G06MI-NOC30B-S49G 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1 kHz Yellow LED IP 67 CE Large switching distance Brass-coated PBT M8 connector, 3-pin Ø 6.5 mm Quasi-flush 3 mm 0...2.4 mm ŶŶŶ BES02UR BES G06MH1-PSC30B-S04G BES02UP BES G06MH1-NSC30B-S04G 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1 kHz Yellow LED IP 67 CE Large switching distance Brass-coated PBT M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 452 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, Ø 6.5 mm HYPERPROX Ø 6.5 mm Quasi-flush 4 mm 0...2.9 mm ŶŶŶŶ BES01NT BES G06MI-PSC40B-S49G Ø 6.5 mm Not flush 2.5 mm 0...2 mm Ŷ BES00TZ BES 516-349-E4-C-02 BES01NR BES G06MI-NSC40B-S49G BES00U6 BES 516-350-E4-C-02 Ø 6.5 mm Not flush 4 mm 0...3.2 mm ŶŶ BES01NP BES G06EF-PSC40F-S49G Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes 0...+60 °C 700 Hz Yellow LED IP 65 CE, cULus Large switching distance Brass-coated PBT M8 connector, 3-pin 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT 2 m PVC cable, 3×0.14 mm² Stainless steel PBT M8 connector, 3-pin Analog distance measurement Special properties Special accessories Ø6.5 37.4 49.5 50 59 30 2.5 Ø6.5 AC 2-wire 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus LED LED ■ www.balluff.com 453 DC 3-/4-wire Inductive Standard Sensors Cylinder designs, Ø 8 mm Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Ø 8 mm Flush 1.5 mm 0...1.2 mm Ŷ BES01NY BES G08EG-PSC15B-BV02 Ø 8 mm Flush 2 mm 0...1.6 mm ŶŶ BES0379 BES 516-369-G-SA2-S49-C BES0349 BES 516-3013-G-SA2-S49-C Ø 8 mm Flush 2 mm 0...1.6 mm ŶŶ 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 800 Hz Yellow LED IP 67 CE, cULus 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 800 Hz Yellow LED IP 67 CE Stainless steel PBT 2 m PVC cable, 3×0.14 mm² Stainless steel PA 12 M8 connector, 3-pin Stainless steel PA 12 0.5 m PUR cable with M8 connector, 3-pin BES0348 BES 516-3013-G-SA2-S49-00,5 Ø8 Ø8 LED 454 54.5 45 Additional cable lengths and PUR cable jacket material available on request. LED For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder designs, Ø 8 mm, M8×1 SUPERSHORTIES Ø 8 mm Flush 2 mm 0...1.6 mm ŶŶ BES0388 BES G08EC-PSC20B-EP01-GS04-516 Ø 8 mm Flush 2 mm 0...1.6 mm ŶŶ BES012N BES G08EE-PSC20B-BV02 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 67 CE 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel Ceramic 1 m PUR cable with M12 connector, 4-pin Stainless steel PBT 2 m PVC cable, 3×0.14 mm² M8 × 1 Flush 0.5 mm 0...0.36 mm Ŷ BES03P0 BES M08EA-PSC05B-EP02 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...85 °C 2 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 2 m PUR cable, 3×0.073 mm² M8 × 1 Flush 1 mm 0...0.8 mm Ŷ BES0367 BES 516-343-SA13-E5-C-S49 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3.5 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT M8 connector, 3-pin Ø8-0.1 Ø8 M8 × 1 Flush 1 mm 0...0.8 mm Ŷ BES02HP BES 516-324-SA8-02 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire 10...30 V DC 1.5 V 75 V DC 200 mA Yes/No/No –25...+100 °C 2 kHz No IP 67 CE AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories Stainless steel PBT 2 m PVC cable, 3×0.14 mm² M8x1 30 13 44 35 20.5 Ø6.5 LED LED 24 41.5 LED M12x1 Ø14.5 ■ www.balluff.com Recommended short-circuit protection equipment: Miniature fuse in accordance with IEC 60127-2 Sheet 1, ≤ 2 A (fast-acting). The fuse has to be in the load current; the fuse may not be placed in the output wiring. 455 DC 3-/4-wire Inductive Standard Sensors Cylinder designs, M8×1 SUPERSHORTIES Additional cable lengths and PUR cable jacket material available on request. M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES013N BES M08EC-PSC15B-S49G BES013K BES M08EC-POC15B-S49G BES013J BES M08EC-NSC15B-S49G M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES013M BES M08EC-PSC15B-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT M8 connector, 3-pin Stainless steel PBT M12 connector, 4-pin M8x1 11.25 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES0277 BES M08EA-PSD15B-S49G BES0270 BES M08EA-POD15B-S49G BES026W BES M08EA-NSD15B-S49G BES026R BES M08EA-NOD15B-S49G 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz No IP 67 CE, cULus short design Stainless steel PBT M8 connector, 3-pin 18 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection M8x1 456 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder designs, M8×1 M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES0147 BES M08EE-PSC15B-S49G BES0143 BES M08EE-POC15B-S49G BES013Z BES M08EE-NSC15B-S49G BES013T BES M08EE-NOC15B-S49G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES0146 BES M08EE-PSC15B-S04G BES0142 BES M08EE-POC15B-S04G BES013Y BES M08EE-NSC15B-S04G BES013R BES M08EE-NOC15B-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT M8 connector, 3-pin Stainless steel PBT M12 connector, 4-pin M8x1 M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES01P7 BES M08EG-PSC15B-S49G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES01AW BES 516-324-S49-C BES01LR BES 516-377-S49-C BES01F5 BES 516-343-S49-C BES01LZ BES 516-378-S49-C 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES01PF BES M08EH-PSC15B-S04G BES01PE BES M08EH-POC15B-S04G BES01PC BES M08EH-NSC15B-S04G BES01PA BES M08EH-NOC15B-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT M8 connector, 3-pin Stainless steel PBT M8 connector, 3-pin Stainless steel PBT M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories M8x1 43 40 29.5 LED 28.5 13 13 LED M8x1 M12x1 ■ www.balluff.com 457 DC 3-/4-wire Inductive Standard Sensors Cylinder designs, M8×1 LED M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES034Y BES 516-324-SA44-C-S49-00,3 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 4 kHz Yellow LED IP 67 CE Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin M8x1 M8x1 20 M8x1 0.35 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 0.3 m PUR cable with M5 connector, 4-pin BES026T BES M08EA-NSC15B-EP00,3-GS49 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin 10 Additional cable lengths and PUR cable jacket material available on request. SUPERSHORTIES M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES0273 BES M08EA-PSC15B-EP00,3-GS49 10 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 SUPERSHORTIES M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES0272 BES M08EA-PSC15B-EP00,3-GS26 0.35 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection LED 13 LED M5x0.5 458 M8x1 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES00NK BES 516-324-E4-C-S49-00,3 Cylinder designs, M8×1 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES01AL BES 516-324-EO-C-S49-00,3 BES01LN BES 516-377-EO-C-S49-00,3 BES01F4 BES 516-343-EO-C-S49-00,3 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin Stainless steel PBT 0.3 m PUR cable with M12 connector, 4-pin Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin Stainless steel PBT 0.3 m PUR cable with M12 connector, 4-pin Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin ■ www.balluff.com M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES00N9 BES 516-324-E4-C-S4-00,3 M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES00MU BES 516-324-E3-C-S49-00,3 M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES00MT BES 516-324-E3-C-S4-00,3 BES010N BES 516-377-E3-C-S4-PU-00,3 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories 459 DC 3-/4-wire Inductive Standard Sensors Cylinder designs, M8×1 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 SUPERSHORTIES SUPERSHORTIES M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES026M BES M08E60-PSC15B-EP02 BES026K BES M08E60-POC15B-EP02 BES026J BES M08E60-NSC15B-EP02 BES026H BES M08E60-NOC15B-EP02 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 2 m PUR cable, 3×0.073 mm² M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES0275 BES M08EA-PSC15B-EP02 BES026Y BES M08EA-POC15B-EP02 BES026U BES M08EA-NSC15B-EP02 BES026N BES M08EA-NOC15B-EP02 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 2 m PUR cable, 3×0.073 mm² M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES034P BES 516-324-SA44-C-02 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 4 kHz Yellow LED IP 67 CE Stainless steel PBT 2 m PVC cable, 3×0.14 mm² M8x1 M8x1 20 6 Additional cable lengths and PUR cable jacket material available on request. LED 13 LED 460 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES014K BES M08EF-PSC15B-BP02 BES014H BES M08EF-POC15B-BP02 BES03J6 BES M08EF-NSC15B-BP02 BES014C BES M08EF-NOC15B-BP02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 2 m PVC cable, 3×0.14 mm² Stainless steel PBT 2 m PUR cable, 3×0.14 mm² Stainless steel PBT 2 m PUR cable, 3×0.14 mm² BES010K BES 516-377-E3-C-PU-02 M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES01A7 BES 516-324-EO-C-02 BES01LC BES 516-377-EO-C-02 BES01EY BES 516-343-EO-C-02 BES01LT BES 516-378-EO-C-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES01AC BES 516-324-EO-C-PU-02 BES01LH BES 516-377-EO-C-PU-02 BES01F1 BES 516-343-EO-C-PU-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 2 m PVC cable, 3×0.14 mm² Stainless steel PBT 2 m PUR cable, 3×0.14 mm² Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories M8x1 M8x1 13 35 13 40 M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES00MY BES 516-324-E4-C-02 BES010T BES 516-377-E4-C-02 BES00TL BES 516-343-E4-C-02 Cylinder designs, M8×1 LED LED ■ www.balluff.com 461 DC 3-/4-wire Inductive Standard Sensors Cylinder designs, M8×1 SUPERSHORTIES Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES0278 BES M08EA-PSD20B-S49G 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz No IP 67 CE, cULus short design Stainless steel PBT 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES014A BES M08EE-PSC20B-S49G BES0145 BES M08EE-POC20B-S49G BES0141 BES M08EE-NSC20B-S49G BES013W BES M08EE-NOC20B-S49G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT Stainless steel PBT Connection M8 connector, 3-pin M8 connector, 3-pin M8 connector, 3-pin M8x1 M8x1 29.5 13 40 11.25 Additional cable lengths and PUR cable jacket material available on request. BES01P1 BES M08EA-NSD20B-S49G 18 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES013P BES M08EC-PSC20B-S49G BES013L BES M08EC-POC20B-S49G M8x1 LED M8x1 462 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder designs, M8×1 M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES0148 BES M08EE-PSC20B-S04G BES0144 BES M08EE-POC20B-S04G BES0140 BES M08EE-NSC20B-S04G BES013U BES M08EE-NOC20B-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT M8 × 1 Flush 2 mm 0...1.4 mm ŶŶ BES0149 BES M08EE-PSC20B-S04G-101 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel With ceramic coating M12 connector, 4-pin M12 connector, 4-pin M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES00P7 BES 516-324-G-E5-C-S49 BES0113 BES 516-377-G-E5-C-S49 BES00TY BES 516-343-G-E5-C-S49 BES0118 BES 516-378-G-E5-C-S49 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT M8 connector, 3-pin M8 × 1 Flush 2 mm 0...1.4 mm ŶŶ BES02P0 BES 516-324-SA96-G-E5-C-S49 M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES01AU BES 516-324-G-S49-C BES01LP BES 516-377-G-S49-C BES02P1 BES 516-343-SA96-G-E5-C-S49 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel with ceramic coating M8 connector, 3-pin Stainless steel PBT AC 2-wire Analog distance measurement Special properties Special accessories M8 connector, 3-pin M8x1 M8x1 13 43 43 28.5 28.5 13 LED LED M12x1 M12x1 ■ www.balluff.com 463 DC 3-/4-wire Inductive Standard Sensors Cylinder designs, M8×1 SUPERSHORTIES M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES01PH BES M08EH-PSC20B-S04G M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES0276 BES M08EA-PSC20B-EP00,3-GS49 M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES00P4 BES 516-324-G-E4-C-S49-00,3 BES0112 BES 516-377-G-E4-C-S49-00,3 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Connection M12 connector, 4-pin 0.3 m PUR cable with M8 connector, 3-pin 0.3 m PUR cable with M8 connector, 3-pin Additional cable lengths and PUR cable jacket material available on request. Stainless steel PBT M8x1 10 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Stainless steel PBT 0.35 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface LED M8x1 464 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder designs, M8×1 SUPERSHORTIES M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES00P2 BES 516-324-G-E4-C-S4-00,3 M8 × 1 Flush 2 mm 0...1.4 mm ŶŶ BES02P5 BES 516-324-SA96-G-E4-C-S4-00.3 M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES03TU BES M08EF-PSC20B-BP00,3-GS49 M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES01AT BES 516-324-G-EO-C-S49-01 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT Stainless steel with ceramic coating 0.3 m PUR cable with M12 connector, 4-pin Stainless steel PBT Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin 1 m PUR cable with M8 connector, 3-pin 0.3 m PUR cable with M12 connector, 4-pin M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES026Z BES M08EA-POC20B-EP02 BES026P BES M08EA-NOC20B-EP02 10...30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus short design Stainless steel PBT Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories 2 m PUR cable, 3×0.073 mm² M8x1 M8x1 37 40 13 LED ■ www.balluff.com 465 DC 3-/4-wire Inductive Standard Sensors Cylinder designs, M8×1 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES00NR BES 516-324-G-E4-C-02 BES010Y BES 516-377-G-E4-C-02 BES00TT BES 516-343-G-E4-C-02 BES0116 BES 516-378-G-E4-C-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES00NY BES 516-324-G-E4-C-PU-02 BES010Z BES 516-377-G-E4-C-PU-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES014L BES M08EF-PSC20B-BP02 BES014J BES M08EF-POC20B-BP02 BES014F BES M08EF-NSC20B-BP02 BES014E BES M08EF-NOC20B-BP02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 2 m PVC cable, 3×0.14 mm² Stainless steel PBT 2 m PUR cable, 3×0.14 mm² Stainless steel PBT 2 m PUR cable, 3×0.14 mm² Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 13 40 Additional cable lengths and PUR cable jacket material available on request. M8x1 LED 466 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES01AM BES 516-324-G-EO-C-02 Cylinder designs, M8×1 M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES01AN BES 516-324-G-EO-C-PU-02 M8 × 1 Flush 2.5 mm 0...2 mm ŶŶ BES0427 BES M08EE-PSC25B-S49G BES0423 BES M08EE-POC25B-S49G TRIPLEPROX TRIPLEPROX M8 × 1 Quasi-flush 3 mm 0...2.4 mm ŶŶŶ BES02WA BES M08MH1-PSC30B-S49G M8 × 1 Quasi-flush 3 mm 0...2.4 mm ŶŶŶ BES02W9 BES M08MH1-PSC30B-S04G BES02W8 BES M08MH1-NSC30B-S49G BES02W7 BES M08MH1-NSC30B-S04G Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC 100 mA Yes/Yes/Yes 0...+60 °C 1 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT 2 m PVC cable, 3×0.14 mm² Stainless steel PBT 2 m PUR cable, 3×0.14 mm² Stainless steel PBT M8 connector, 3-pin 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1 kHz Yellow LED IP 67 CE Large switching distance Brass-coated PBT M8 connector, 3-pin M8x1 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1 kHz Yellow LED IP 67 CE Large switching distance Brass-coated PBT M12 connector, 4-pin AC 2-wire Analog distance measurement Special properties Special accessories M8x1 13 66 60 46 45.5 40 29.5 13 LED M8x1 ■ www.balluff.com LED 467 DC 3-/4-wire Inductive Standard Sensors Cylinder designs, M8×1 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection TRIPLEPROX HYPERPROX HYPERPROX M8 × 1 Quasi-flush 3 mm 0...2.2 mm ŶŶŶ BES02PW BES M08MH1-PSC30B-S04G-101 M8 × 1 Quasi-flush 4 mm 0...2.9 mm ŶŶŶŶ BES01ZW BES M08MI-PSC40B-S49G M8 × 1 Quasi-flush 4 mm 0...2.9 mm ŶŶŶŶ BES003R BES M08MI-PSC40B-BP00,3-GS49 BES01ZT BES M08MI-NSC40B-S49G 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes 0...+60 °C 800 Hz Yellow LED IP 67 CE, cULus Large switching distance Brass-coated PBT 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes 0...+60 °C 800 Hz Yellow LED IP 67 CE, cULus Large switching distance Brass-coated PBT 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1 kHz Yellow LED IP 67 CE Large switching distance Brass-coated with ceramic coating M12 connector, 4-pin M8 connector, 3-pin 0.3 m PUR cable with M8 connector, 3-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M8x1 Additional cable lengths and PUR cable jacket material available on request. M8x1 50.5 37 468 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder designs, M8×1 HYPERPROX M8 × 1 Quasi-flush 4 mm 0...2.9 mm ŶŶŶŶ BES01ZU BES M08MI-PSC40B-BP00,2-GS04 M8 × 1 Not flush 2.5 mm 0...2 mm Ŷ BES01P3 BES M08ED-PSC25F-S04G BES01ZR BES M08MI-NSC40B-BP00,2-GS04 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes 0...+60 °C 800 Hz Yellow LED IP 67 CE, cULus Large switching distance Brass-coated PBT BES01P2 BES M08ED-NSC25F-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 0.2 m PUR cable with M12 connector, 4-pin M8 × 1 Not flush 2.5 mm 0...2 mm Ŷ BES01M6 BES 516-383-S49-C M8 × 1 Not flush 2.5 mm 0...2 mm Ŷ 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M8 × 1 Not flush 2.5 mm 0...2 mm Ŷ BES01P8 BES M08EG-PSC25F-S04G BES01P6 BES M08EG-POC25F-S04G BES01P5 BES M08EG-NSC25F-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT Stainless steel PBT Stainless steel PBT Stainless steel PBT M12 connector, 4-pin M8 connector, 3-pin M12 connector, 4-pin 0.2 m PVC cable with M8 connector, 3-pin Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs BES011U BES 516-384-E4-C-S49-00.2 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 67 CE, cULus DC 2-wire AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories M8x1 30 2.5 Ø6.5 13 37 LED M8x1 Ø10 ■ www.balluff.com 469 DC 3-/4-wire Inductive Standard Sensors Cylinder designs, M8×1 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection M8 × 1 Not flush 2.5 mm 0...2 mm Ŷ M8 × 1 Not flush 2.5 mm 0...2 mm Ŷ BES011A BES 516-383-E4-C-02 M8 × 1 Not flush 2.5 mm 0...2 mm Ŷ BES01M0 BES 516-383-EO-C-02 BES01MA BES 516-384-EO-C-S49-00.2 BES011M BES 516-384-E4-C-02 BES01M7 BES 516-384-EO-C-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 67 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 0.2 m PVC cable with M8 connector, 3-pin Stainless steel PBT 2 m PVC cable, 3×0.14 mm² Stainless steel PBT 2 m PVC cable, 3×0.14 mm² Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M8x1 Ø6.5 45 2.5 Additional cable lengths and PUR cable jacket material available on request. 13 37 LED M8x1 Ø10 470 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder designs, M8×1 M8 × 1 Not flush 4 mm 0...3.2 mm ŶŶ BES014M BES M08EF-PSC40F-S49G M8 × 1 Not flush 4 mm 0...3.2 mm ŶŶ BES01P9 BES M08EG1-PSC40F-S04G TRIPLEPROX TRIPLEPROX M8 × 1 Not flush 6 mm 0...4.8 mm ŶŶŶ BES02W4 BES M08MG1-PSC60F-S49G BES02W2 BES M08MG1-POC60F-S49G M8 × 1 Not flush 6 mm 0...4.8 mm ŶŶŶ BES02W3 BES M08MG1-PSC60F-S04G BES02W0 BES M08MG1-NSC60F-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT M8 connector, 3-pin Stainless steel PBT M12 connector, 4-pin BES02UZ BES M08MG1-NOC60F-S49G 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 67 CE Large switching distance Brass-coated PBT M8 connector, 3-pin M8x1 DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 67 CE Large switching distance Brass-coated PBT M12 connector, 4-pin AC 2-wire Analog distance measurement Special properties Special accessories 4 4 5 Global DC 3-wire M8x1 5 M8x1 Inductive sensors LED M8x1 66 64 60 41 13 42 13 49.5 39.1 13 LED LED M12x1 ■ www.balluff.com 471 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M12×1 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number PNP, complementary Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number NPN, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M12×1 Flush 2 mm 0...1.6 mm Ŷ BES00PK BES 516-325-E5-C-S4 BES00YT BES 516-370-E5-C-S4 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES02EL BES 515-325-S4-C BES01K6 BES 516-370-S4-C M12×1 Flush 2 mm 0...1.6 mm Ŷ BES01C8 BES 516-325-S4-C BES0161 BES 516-113-S4-C BES00T5 BES 516-329-E5-C-S4 BES010A BES 516-375-E5-C-S4 10...30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PBT M12 connector, 4-pin BES01EN BES 516-329-S4-C BES01LA BES 516-375-S4-C 10...30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 M12 connector, 4-pin BES016E BES 516-118-S4-C 10...30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 2.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 472 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire M12×1 Flush 2 mm 0...1.6 mm Ŷ BES00PH BES 516-325-E4-C-S4-00,5 Cylinder design, M12×1 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES00P8 BES 516-325-E4-C-02 BES00YL BES 516-370-E4-C-02 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES01AZ BES 516-325-BO-C-02 BES01K2 BES 516-370-BO-C-02 M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES00PY BES 516-325-G-E5-C-S4 BES00Z0 BES 516-370-G-E5-C-S4 M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES014W BES M12EE-PSC40B-S04G BES014U BES M12EE-POC40B-S04G Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire BES01EF BES 516-329-BO-C-02 BES01L7 BES 516-375-BO-C-02 BES00TC BES 516-329-G-E5-C-S4 BES010H BES 516-375-G-E5-C-S4 10...30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PBT 2 m PVC cable, 3×0.34 mm² 10...30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 2 m PVC cable, 3×0.34 mm² 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated LCP M12 connector, 4-pin AC/DC 2-wire AC 2-wire Analog distance measurement 10...30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+85 °C 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel LCP M12 connector, 4-pin Special properties Special accessories M12x1 M12x1 17 45 30 33 17 30 10...30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PBT 0.5 m PUR cable with M12 connector, 4-pin BES00T0 BES 516-329-E4-C-02 BES0108 BES 516-375-E4-C-02 LED LED M12x1 ■ www.balluff.com 473 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M12×1 Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 BES03UP BES 516-329-SA96-G-E5-C-S4 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated with ceramic coating M12 connector, 4-pin M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES00PZ BES 516-325-G-E5-C-S49 BES00Z1 BES 516-370-G-E5-C-S49 BES00TE BES 516-329-G-E5-C-S49 BES010J BES 516-375-G-E5-C-S49 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED IP 67 CE, cULus M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES02FU BES M12EI-PSC40B-S04G BES02FT BES M12EI-POC40B-S04G BES02FR BES M12EI-NSC40B-S04G Brass-coated LCP Stainless steel LCP M8 connector, 3-pin M12 connector, 4-pin 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+85 °C 1 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M12x1 17 45 Additional cable lengths and PUR cable jacket material available on request. M12×1 Flush 4 mm 0...3 mm ŶŶ 30 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface LED M12x1 474 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, M12×1 SUPERSHORTIES M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES038C BES M12EI-PSC40B-S04G-009 M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES01C7 BES 516-325-G-S4-C M12×1 Flush 4 mm 0...3 mm ŶŶ BES035R BES 516-325-SA96-G-S4-C 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 2 kHz Yellow LED IP 67 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel LCP Brass-coated LCP M12 connector, 4-pin M12 connector, 4-pin Brass-coated with ceramic coating M12 connector, 4-pin M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES0464 BES M12EA-PSC40B-EP00,3-GS04 BES0465 BES M12EA-POC40B-EP00,3-GS04 BES0467 BES M12EA-NSC40B-EP00,3-GS04 BES0466 BES M12EA-NOC40B-EP00,3-GS04 10...30 V DC 1.7 V 75 V DC 100 mA Yes/Yes/Yes –40...+85 °C 1 kHz Yellow LED IP 67 CE, cULus short design Stainless steel LCP 0.3 m PUR cable with M12 connector, 4-pin M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES00PW BES 516-325-G-E4-C-S4-00,5 BES03EK BES 516-329-G-E4-C-S4-PU-00.5 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus AC 2-wire Analog distance measurement Special properties Special accessories Brass-coated LCP 0.5 m PUR cable with M12 connector, 4-pin M12x1 30 LED 33 12 0.6 M12x1 17 24 41.5 LED M12x1 M12x1 Ø14.5 ■ www.balluff.com 475 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M12×1 TRIPLEPROX M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES00PP BES 516-325-G-E4-C-PU-02 BES00YW BES 516-370-G-E4-C-PU-02 M12×1 Quasi-flush 6 mm 0...4.8 mm ŶŶŶ BES02WZ BES M12MG1-PSC60B-S04G BES02WY BES M12MG1-POC60B-S04G BES00T6 BES 516-329-G-E4-C-02 BES010C BES 516-375-G-E4-C-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus BES00T9 BES 516-329-G-E4-C-PU-02 BES010E BES 516-375-G-E4-C-PU-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated LCP 2 m PVC cable, 3×0.34 mm² Brass-coated LCP 2 m PUR cable, 3×0.34 mm² BES02WW BES M12MG1-NSC60B-S04G BES02WU BES M12MG1-NOC60B-S04G 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 800 Hz Yellow LED IP 67 CE Large switching distance Brass-coated PBT M12 connector, 4-pin M12x1 17 30 LED 30 17 Additional cable lengths and PUR cable jacket material available on request. 476 M12x1 33 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES00PL BES 516-325-G-E4-C-02 BES00YU BES 516-370-G-E4-C-02 33 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number PNP, complementary Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection LED For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, M12×1 HYPERPROX M12×1 Quasi-flush 8 mm 0...5.8 mm ŶŶŶŶ BES01ZN BES M12MI-PSH80B-S04G M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES00UY BES 516-356-E5-C-S4 BES00KM BES 516-3019-E5-C-S4 M12×1 Not flush 4 mm 0...3.2 mm Ŷ M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES02FC BES 515-356-S4-C BES018Y BES 516-3019-S4-C M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES01H6 BES 516-356-S4-C BES0178 BES 516-131-S4-C 10...30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 400 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus BES01HE BES 516-357-S4-C BES019E BES 516-3030-S4-C 10...30 V DC 1.5 V 250 AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PBT M12 connector, 4-pin Brass-coated PA 12 M12 connector, 4-pin Stainless steel PA 12 M12 connector, 4-pin 4.9 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes 0...+60 °C 300 Hz Yellow LED IP 67 CE Large switching distance Brass-coated LCP M12 connector, 4-pin BES030Z BES 516-357-E5-Y-S4 ■ www.balluff.com Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire 10...30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 M12 connector, 4-pin Analog distance measurement Special properties Special accessories 34.4 BES01ZY BES M12MI-NSH80B-S04G Inductive sensors 477 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M12×1 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES00UT BES 516-356-E4-C-S4-00,3 M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES00UL BES 516-356-E4-C-02 10...30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus BES00W0 BES 516-357-E4-C-02 BES00M0 BES 516-3030-E4-C-02 10...30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES01H1 BES 516-356-BO-C-02 BES018P BES 516-3019-BO-C-02 BES01H7 BES 516-357-BO-C-02 BES019A BES 516-3030-BO-C-02 10...30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 1.2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PBT 2 m PVC cable, 3×0.34 mm² Stainless steel PA 12 2 m PVC cable, 3×0.34 mm² Brass-coated PBT 0.3 m PUR cable with M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 478 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, M12×1 SUPERSHORTIES M12×1 Not flush 8 mm 0...6.4 mm ŶŶ BES01PN BES M12EG-PSC80F-S04G TRIPLEPROX TRIPLEPROX M12×1 Not flush 10 mm 0...8 mm ŶŶŶ BES02WK BES M12MC1-PSC10F-S04G M12×1 Not flush 10 mm 0...8 mm ŶŶŶ BES02WR BES M12MF1-PSC10F-S04G BES02WP BES M12MF1-POC10F-S04G BES02WN BES M12MF1-NSC10F-S04G BES02WJ BES M12MC1-NSC10F-S04G Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT M12 connector, 4-pin 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 400 Hz Yellow LED IP 67 CE Large switching distance Brass-coated PBT M12 connector, 4-pin 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 400 Hz Yellow LED IP 67 CE Large switching distance Brass-coated PBT M12 connector, 4-pin AC 2-wire Analog distance measurement Special properties Special accessories 41 5.7 LED 5.7 M12x1 17 5.6 M12×1 Not flush 6 mm 0...4.8 mm ŶŶ BES047L BES M12EA-PSC60F-EP00.3-GS04 BES047M BES M12EA-POC60F-EP00,3-GS04 BES047P BES M12EA-NSC60F-EP00,3-GS04 BES047N BES M12EA-NOC60F-EP00,3-GS04 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –40...+85 °C 1 kHz Yellow LED IP 67 CE, cULus short design Stainless steel LCP 0.3 m PUR cable with M12 connector, 4-pin M12x1 ■ www.balluff.com 479 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M18×1 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number PNP, complementary Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number NPN, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 M18×1 Flush 5 mm 0...4 mm Ŷ BES00R6 BES 516-326-E5-C-S4 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1 kHz Yellow LED IP 67 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 67 Approvals Special properties CE, cULus CE, cULus Brass-coated PBT M12 connector, 4-pin Brass-coated PA 12 M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M18x1 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –40...+105 °C* 500 Hz No IP 69K, IP 68 as per BWN Pr. 27 CE, cULus Resistant to high pressure cleaners Stainless steel PA 12 M12 connector, 4-pin M18x1 24 24 29.5 Additional cable lengths and PUR cable jacket material available on request. LED M12x1 29.5 Connection BES00UC BES 516-355-E5-Y-S4 44.5 Housing Sensing surface M18×1 Flush 5 mm 0...4 mm Ŷ BES02ET BES 515-326-E5-T-S4 BES00YC BES 516-367-E5-Y-S4 44.5 Material M18×1 Flush 5 mm 0...4 mm Ŷ LED M12x1 *max. load current over temperature 130 mA 20 mA – 40 °C 480 +70 °C +85 °C +105 °C For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, M18×1 M18×1 Flush 5 mm 0...4 mm Ŷ BES01CW BES 516-326-S4-C BES01JW BES 516-367-S4-C BES015N BES 516-105-S4-C BES01H0 BES 516-355-S4-C BES01JU BES 516-366-S4-C BES015U BES 516-111-S4-C 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 900 Hz Yellow LED IP 68 per BWN Pr. 20 M18×1 Flush 5 mm 0...4 mm Ŷ BES01CZ BES 516-326-S4-H M18×1 Flush 5 mm 0...4 mm Ŷ BES02EU BES 515-326-S4-C M18×1 Flush 5 mm 0...4 mm Ŷ BES00R5 BES 516-326-E4-C-S4-00,2 M18×1 Flush 5 mm 0...4 mm Ŷ BES00R0 BES 516-326-E4-C-02 10...55 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 900 Hz Yellow LED IP 68 per BWN Pr. 20 10...30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 900 Hz Yellow LED IP 68 per BWN Pr. 20 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1 kHz Yellow LED IP 67 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1 kHz Yellow LED IP 67 CE, cULus CE CE, cULus CE, cULus CE, cULus Brass-coated PA 12 M12 connector, 4-pin Brass-coated PA 12 M12 connector, 4-pin Stainless steel PA 12 M12 connector, 4-pin Brass-coated PA 12 0.2 m PUR cable with M12 connector, 4-pin Brass-coated PBT 2 m PVC cable, 3×0.34 mm² Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories 30 73 83 50 58 24 36 M18x1 24 41.5 LED M12x1 Ø14.5 ■ www.balluff.com 481 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M18×1 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number PNP, complementary Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface M18×1 Flush 5 mm 0...4 mm Ŷ BES01CE BES 516-326-BO-C-02 M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES030R BES 516-326-G-E5-Y-S49 BES00YK BES 516-367-G-E5-Y-S49 M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES00RC BES 516-326-G-E5-C-S4 BES00YJ BES 516-367-G-E5-Y-S4 BES01JP BES 516-366-BO-C-02 BES00UK BES 516-355-G-E5-Y-S49 BES00UJ BES 516-355-G-E5-Y-S4 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 200 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 200 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT Connection 2 m PVC cable, 3×0.34 mm² M8 connector, 3-pin M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M18x1 M18x1 29.5 30 44 24 44.5 24 Additional cable lengths and PUR cable jacket material available on request. LED LED M12x1 482 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, M18×1 M18×1 Flush 8 mm 0...6.3 mm ŶŶ BES02P3 BES 516-326-SA96-G-E5-Y-S4 M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES02H0 BES M18EI-PSC80B-S04G BES02FZ BES M18EI-POC80B-S04G M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES01CT BES 516-326-G-S4-C M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES01CU BES 516-326-G-S4-H M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES00RA BES 516-326-G-E4-C-S4-00,3 BES015M BES 516-105-G-S4-H BES02P4 BES 516-355-SA96-G-E5-Y-S4 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 200 Hz Yellow LED IP 67 CE, cULus Brass-coated with ceramic coating M12 connector, 4-pin Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire BES02FY BES M18EI-NSC80B-S04G BES02FW BES M18EI-NOC80B-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 700 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 10...30 V DC 2.5 V 75 V DC ([) 200 mA Yes/Yes/Yes 0...70 °C 80 Hz Yes IP 67 CE, cULus Brass-coated PBT 10...55 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes 0...+70 °C 80 Hz Yellow LED IP 67 CE Brass-coated PBT 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 67 CE, cULus Brass-coated PBT M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin 0.3 m PUR cable with M12 connector, 4-pin AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories M18x1 M18x1 M18x1 Inductive sensors 31 37 24 50 24 65 44.5 29.5 24 LED LED LED 11 M12x1 41.5 M12x1 M12x1 ■ www.balluff.com 483 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M18×1 TRIPLEPROX TRIPLEPROX Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES01CN BES 516-326-G-BO-C-PU-02 M18×1 Quasi-flush 12 mm 0...9.6 mm ŶŶŶ BES02Y5 BES M18MD1-PSC12B-S04G M18×1 Quasi-flush 12 mm 0...9.6 mm ŶŶŶ BES02Y9 BES M18MG1-PSC12B-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes 0...+70 °C BES02Y4 BES M18MD1-NSC12B-S04G 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C BES02Y8 BES M18MG1-NSC12B-S04G 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 80 Hz Yellow LED IP 67 500 Hz Yellow LED IP 67 500 Hz Yellow LED IP 67 Approvals Special properties CE, cULus CE Large switching distance Brass-coated PBT M12 connector, 4-pin CE Large switching distance Brass-coated PBT M12 connector, 4-pin Material Housing Sensing surface Connection Brass-coated PA 12 2 m PUR cable, 3×0.34 mm² Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 24 76.5 50.5 Additional cable lengths and PUR cable jacket material available on request. M18x1 LED 484 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, M18×1 M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES00WM BES 516-360-E5-Y-S4 BES00LL BES 516-3026-E5-Y-S4 BES00WT BES 516-361-E5-Y-S4 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES02FK BES 515-360-E5-T-S4 M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES02FM BES 515-360-SA12-S4-T M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES03AW BES 516-360-S4-L M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES01HY BES 516-360-S4-C BES0193 BES 516-3026-S4-C Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire 10...30 V DC 3.5 V 75 DC 130 mA Yes/Yes/Yes –40...+105 °C* 200 Hz Yellow LED IP 67 200 Hz No IP 69K, IP 68 as per BWN Pr. 27 CE, cULus Resistant to high pressure cleaners Stainless steel PA 12 M12 connector, 4-pin CE, cULus Brass-coated PA 12 M12 connector, 4-pin 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –40...+85 °C (momentarily 105 °C) 200 Hz No IP 69K, IP 68 as per BWN Pr. 27 CE, cULus resistant to high pressure cleaners Stainless steel PA 12 M12 connector, 4-pin *max. load current over temperature 10...30 V DC 2.5 V 250 V AC ([) 400 mA Yes/No/No –40...+85 °C 10...30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 200 Hz Yellow LED IP 68 per BWN Pr. 20 600 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus CE, cULus Brass-coated PA 12 M12 connector, 4-pin Brass-coated PA 12 M12 connector, 4-pin AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories Recommended short-circuit protection equipment: miniature fuse in accordance with IEC 60127-2 Sheet 1, ≤ 2 A (fast acting). The fuse has to be in the load current; the fuse must not be placed in the output wiring. 130 mA 20 mA – 40 °C ■ www.balluff.com +70 °C +85 °C +105 °C 485 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M18×1 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number PNP, complementary Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number NPN, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M18×1 Not flush 8 mm 0...6.5 mm Ŷ M18×1 Not flush 8 mm 0...6.5 mm Ŷ M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES02FL BES 515-360-S4-C BES016Y BES 516-123-S4-C 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 200 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 M12 connector, 4-pin BES01J5 BES 516-361-S4-C BES019H BES 516-3031-S4-C BES0171 BES 516-124-S4-C 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 200 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 M12 connector, 4-pin 10...30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 600 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 486 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire M18×1 Not flush 8 mm 0...6.5 mm Ŷ Cylinder design, M18×1 M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES00WH BES 516-360-E4-Y-02 BES00LH BES 516-3026-E4-Y-02 M18×1 Not flush 8 mm 0...6.5 mm Ŷ M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES018Z BES 516-3026-BO-C-02 BES02E1 BES 515-123-S4-C ■ www.balluff.com Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire BES00WN BES 516-361-E4-Y-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 200 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 M12 connector, 4-pin Inductive sensors 10...30 V DC 3.5 V 250 V AC ([) 130 mA Yes/Yes/Yes –25...+70°C 200 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² BES01HZ BES 516-361-BO-C-02 BES019F BES 516-3031-BO-C-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 200 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² AC/DC 2-wire AC 2-wire Analog distance measurement 10...30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 600 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² Special properties Special accessories 487 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M18×1 TRIPLEPROX Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number PNP, complementary Ordering code Part number NPN, NO Ordering code Part number NPN, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection M18×1 Not flush 16 mm 0...13 mm ŶŶ BES016W BES 516-123-G-S4-H BES01HW BES 516-360-G-S4-H M18×1 Not flush 20 mm 0...16 mm ŶŶŶ BES02Y7 BES M18ME1-PSC20F-S04G BES02Y6 BES M18ME1-NSC20F-S04G 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 80 Hz Yellow LED IP 68 per BWN Pr. 20 CE Brass-coated PA 12 M12 connector, 4-pin 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 200 Hz Yellow LED IP 67 CE Large switching distance Brass-coated PBT M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. Reliably monitor speed Two inductive sensors are sufficient to protect your system from overspeed. Attached to a perforated disk, they determine rotary speed and direction. ■ Extremely reliable (STOP, EMC, shocks) ■ For extreme conditions (temperature fluctuations) ■ Long service life ■ Insensitive to contamination 488 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, M30×1.5 M30×1.5 Flush 10 mm 0...8 mm Ŷ BES00RP BES 516-327-E5-Y-S4 BES00LM BES 516-3028-E5-Y-S4 M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES02F1 BES 515-327-S4-C 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 200 Hz Yellow LED IP 67 CE, cULus M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES01EE BES 516-327-S4-C BES0195 BES 516-3028-S4-C BES0167 BES 516-114-S4-C BES01HL BES 516-359-S4-C BES016J BES 516-120-S4-C 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 300 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 300 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 300 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 200 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 M12 connector, 4-pin Brass-coated PA 12 M12 connector, 4-pin Stainless steel PA 12 M12 connector, 4-pin Stainless steel PA 12 M12 connector, 4-pin Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² BES00W9 BES 516-359-E5-Y-S4 M30×1.5 Flush 10 mm 0...8.1 mm Ŷ M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES00RF BES 516-327-E4-Y-02 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs BES02E0 BES 515-114-S4-C DC 2-wire BES00W5 BES 516-359-E4-Y-02 AC/DC 2-wire AC 2-wire Analog distance measurement Special properties Special accessories M30x1.5 M30x1.5 36 LED 30 36 44.5 30 36 LED M12x1 ■ www.balluff.com 489 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M30×1.5 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES01E3 BES 516-327-BO-C-02 M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES00RY BES 516-327-G-E5-Y-S49 M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES00RW BES 516-327-G-E5-Y-S4 BES00LU BES 516-3028-G-E5-Y-S4 BES01HF BES 516-359-BO-C-02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 300 Hz Yellow LED IP 67 CE, cULus BES00WE BES 516-359-G-E5-Y-S49 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 67 CE, cULus 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² Brass-coated PA 12 M8 connector, 3-pin Brass-coated PA 12 M12 connector, 4-pin M30x1.5 36 30 Additional cable lengths and PUR cable jacket material available on request. 44.5 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number PNP, complementary Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection LED M12x1 490 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, M30×1.5 TRIPLEPROX M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES01EA BES 516-327-G-S4-C M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES01EC BES 516-327-G-S4-H M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES00RR BES 516-327-G-E4-Y-02 BES00LN BES 516-3028-G-E4-Y-02 M30×1.5 Quasi-flush 22 mm 0...17.6 mm ŶŶŶ BES02YM BES M30MI1-PSC22B-S04G BES02YL BES M30MI1-POC22B-S04G BES0166 BES 516-114-G-S4-H 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 67 CE, cULus 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 150 Hz Yellow LED IP 68 per BWN Pr. 20 CE Brass-coated PA 12 M12 connector, 4-pin Brass-coated PA 12 M12 connector, 4-pin BES00WA BES 516-359-G-E4-Y-02 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 2 m PVC cable, 3×0.34 mm² BES02YK BES M30MI1-NSC22B-S04G 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 200 Hz Yellow LED IP 67 CE Large switching distance Brass-coated PBT M12 connector, 4-pin M30×1.5 Not flush 15 mm 0...12.2 mm Ŷ BES00Y0 BES 516-362-E5-Y-S4 BES00LZ BES 516-3029-E5-Y-S4 BES00Y4 BES 516-363-E5-Y-S4 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 67 CE, cULus AC 2-wire Analog distance measurement Special properties Special accessories Brass-coated PA 12 M12 connector, 4-pin M30x1.5 30 36 36 LED ■ www.balluff.com 491 DC 3-/4-wire Inductive Standard Sensors Cylinder design, M30×1.5 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number PNP, complementary Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection M30×1.5 Not flush 15 mm 0...12.2 mm Ŷ BES01JE BES 516-362-S4-C BES0198 BES 516-3029-S4-C BES0173 BES 516-125-S4-C BES01JN BES 516-363-S4-C BES019N BES 516-3033-S4-C 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus M30×1.5 Not flush 15 mm 0...12.2 mm Ŷ BES03AL BES M30ML-PSC15F-S04G-002 M30×1.5 Not flush 15 mm 0...12.2 mm Ŷ BES01JF BES 516-362-S4-H 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 75 Hz Yellow LED IP 67 CE 10...55 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 400 Hz Yellow LED IP 68 per BWN Pr. 20 CE Brass-coated PA 12 M12 connector, 4-pin Brass-coated PA 12 M12 connector, 4-pin Brass-coated PA 12 M12 connector, 4-pin BES03AT BES M30ML-NSC15F-S04G-002 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. M12x1 492 M12x1 M12x1 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Cylinder design, M30×1.5 TRIPLEPROX M30×1.5 Not flush 15 mm 0...12.2 mm Ŷ BES02FN BES 515-362-S4-C M30×1.5 Not flush 15 mm 0...12.2 mm Ŷ BES00WU BES 516-362-E4-Y-02 BES00LW BES 516-3029-E4-Y-02 BES00Y1 BES 516-363-E4-Y-02 M30×1.5 Not flush 15 mm 0...12.2 mm Ŷ BES01J6 BES 516-362-BO-C-02 M30×1.5 Not flush 30 mm 0...24.00 mm ŶŶ BES01JC BES 516-362-G-S4-H BES01JJ BES 516-363-BO-C-02 BES019L BES 516-3033-BO-C-02 M30×1.5 Not flush 40 mm 0...32 mm ŶŶŶ BES02YJ BES M30MG1-PSC40F-S04G Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire BES02YH BES M30MG1-NSC40F-S04G AC/DC 2-wire AC 2-wire 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus 10...55 V DC 2.5 V 250 V AC 200 mA Yes/Yes/Yes –25...+70°C 70 Hz Yellow LED IP 68 per BWN Pr. 20 CE Stainless steel PA 12 M12 connector, 4-pin Brass-coated PA 12 2 m cable PVC, 3×0.34 mm Brass-coated PA 12 2 m cable PVC, 3×0.34 mm Brass-coated PA 12 M12 connector, 4-pin M12x1 ■ www.balluff.com 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 54 CE Large switching distance Brass-coated PBT M12 connector, 4-pin Analog distance measurement Special properties Special accessories M12x1 493 DC 3-/4-wire Inductive Standard Sensors Block design, 5×5 mm Five good reasons for using inductive 5x5 sensors ■ One rugged, compact metal housing ■ Two switching variants (can be installed flush): 0.8 mm for high-precision applications, new 1.5 mm for more function reserve ■ Three connections: Supply (+), Ground (-), Output. Easy to integrate into standard and special controllers. ■ Four interface variants: PNP or NPN, normally open or normally closed ■ Five millimeter installation height in the sensing direction Electronics manufacturing: Mechatronic modules require miniature sensors. Balluff offers mini.s in the highest degree of precision. Robotics automation: The trend towards miniaturization continues. Balluff is leading the way. Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911. Additional cable lengths on request. Punching/reshaping technology: Workpieces are getting smaller and smaller. Balluff sensors adapt to this. Linear technology: Position detection in a simple manner through mini designs with maximum performance. 494 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 5×5 mm Flush 0.8 mm 0...0.65 mm Ŷ BES01ZF BES 516-3040-I02-C-S49 BES01ZH BES 516-3042-I02-C-S49 BES01A0 BES 516-3041-I02-C-S49 BES01A5 BES 516-3043-I02-C-S49 10...30 V DC 2.5 V 75 DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Anodized aluminum PBT M8 connector, 3-pin 5×5 mm Flush 0.8 mm 0...0.65 mm Ŷ BES019W BES 516-3040-I02-C-S49-00,3 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Anodized aluminum PBT 0.3 m PUR cable with M8 connector, 3-pin 37 5×5 mm Flush 0.8 mm 0...0.65 mm Ŷ BES01RM BES Q05AC-PSC08B-S26G BES01RH BES Q05AC-POC08B-S26G BES01RA BES Q05AC-NSC08B-S26G BES01R6 BES Q05AC-NOC08B-S26G 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Anodized aluminum PBT M5 connector, 3-pin Block design, 5×5 mm ■ www.balluff.com 5×5 mm Flush 0.8 mm 0...0.65 mm Ŷ BES019T BES 516-3040-I02-C-S4-00,3 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Anodized aluminum PBT 0.3 m PUR cable with M12 connector, 4-pin 5×5 mm Flush 0.8 mm 0...0.65 mm Ŷ BES019P BES 516-3040-I02-C-PU-02 BES01A1 BES 516-3042-I02-C-PU-02 BES019Y BES 516-3041-I02-C-PU-02 BES01A3 BES 516-3043-I02-C-PU-02 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Narrow design Anodized aluminum PBT 2 m PUR cable, 3×0.14 mm² Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 50 3-/4-Wire 495 DC 3-/4-wire Inductive Standard Sensors Block design, 5×5 mm 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT 0.3 m PUR cable with M8 connector, 3-pin 5x5 46 2.8 5.6 1.5 5×5 mm Flush 1.5 mm 0...1.2 mm ŶŶ BES03UW BES Q05AC-PSC15B-EP00,3-GS49 25 Additional cable lengths on request 5×5 mm Flush 1.5 mm 0...1.2 mm ŶŶ BES01RR BES Q05AC-PSC15B-S49G BES01RL BES Q05AC-POC15B-S49G BES01RF BES Q05AC-NSC15B-S49G BES01R9 BES Q05AC-NOC15B-S49G 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT M8 connector, 3-pin 14 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 5×5 mm Flush 1.5 mm 0...1.2 mm ŶŶ BES01RP BES Q05AC-PSC15B-S26G BES01RK BES Q05AC-POC15B-S26G BES01RE BES Q05AC-NSC15B-S26G BES01R8 BES Q05AC-NOC15B-S26G 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT M5 connector, 3-pin M1.6 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, normally open Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection LED 37 M8x1 496 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Block design, 5×5 mm 5×5 mm Flush 1.5 mm 0...1.2 mm ŶŶ BES01RN BES Q05AC-PSC15B-EP02 BES01RJ BES Q05AC-POC15B-EP02 BES01RC BES Q05AC-NSC15B-EP02 BES01R7 BES Q05AC-NOC15B-EP02 10...30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 2 kHz Yellow LED IP 67 CE, cULus Narrow design Stainless steel PBT 2 m PUR cable, 3×0.14 mm² Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 5 25 2xM1.6 14 LED 2.8 5.6 1.5 Inductive sensors ■ www.balluff.com 497 DC 3-/4-wire Inductive Standard Sensors Block design, 8×8 mm SUPERSHORTIES SUPERSHORTIES 8×8 mm Flush 1.5 mm 0...1.2 mm Ŷ BES03U1 BES Q08MEC-PSC15B-S26G BES03YE BES Q08MEC-POC15B-S26G BES03Y7 BES Q08MEC-NSC15B-S26G BES03U9 BES Q08MEC-NOC15B-S26G 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Short design Brass-coated PBT M5 connector, 3-pin 8×8 mm Flush 1.5 mm 0...1.2 mm Ŷ BES03Y6 BES Q08MEC-PSC15B-S49G BES03U0 BES Q08MEC-POC15B-S49G BES03U8 BES Q08MEC-NSC15B-S49G BES03YC BES Q08MEC-NOC15B-S49G 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Short design Brass-coated PBT M8 connector, 3-pin 8 10 M8×1 59 50 20 M5x0.5 M3 20 LED 5 3 5 10 Cast zinc PBT M8 connector, 3-pin 26.7 20 LED 8×8 mm Flush 1.5 mm 0...1.2 mm Ŷ BES0180 BES 516-300-S166-S49 BES0187 BES 516-300-S180-S49 BES0184 BES 516-300-S170-S49 BES018H BES 516-300-S264-S49 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 5 kHz Yellow LED IP 67 CE, cULus 8 3 5 10 M3 Additional cable lengths and PUR cable jacket material available on request. 8 3 M3 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 24.2 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection LED M8x1 498 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Block design, 8×8 mm SUPERSHORTIES SUPERSHORTIES 8×8 mm Flush 1.5 mm 0...1.2 mm Ŷ BES041C BES Q08MEC-PSC15B-EP00,3-GS49 BES041E BES Q08MEC-POC15B-EP00,3-GS49 BES041F BES Q08MEC-NSC15B-EP00,3-GS49 BES041H BES Q08MEC-NOC15B-EP00,3-GS49 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Short design Brass-coated PBT 0.3 m PUR cable with M8 connector, 3-pin 8×8 mm Flush 1.5 mm 0...1.2 mm Ŷ BES03TZ BES Q08MEC-PSC15B-EP02 BES03Y5 BES Q08MEC-POC15B-EP02 BES03YA BES Q08MEC-NSC15B-EP02 BES03U7 BES Q08MEC-NOC15B-EP02 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Short design Brass-coated PBT 2 m PUR cable, 3×0.14 mm² Cast zinc PBT 2 m PVC cable, 3×0.14 mm² Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 5 20 10 M3 20 LED Inductive sensors 8 3 5 M3 LED 10 5 M3 20 20 10 5 10 M3 LED 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus 8×8 mm Flush 2 mm 0...1.6 mm ŶŶ BES03U4 BES Q08MEC-PSC20B-S26G BES03YH BES Q08MEC-POC20B-S26G BES03Y9 BES Q08MEC-NSC20B-S26G BES03UE BES Q08MEC-NOC20B-S26G 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Short design Brass-coated PBT M5 connector, 3-pin 8 3 8 3 8 3 SUPERSHORTIES 8×8 mm Flush 1.5 mm 0...1.2 mm Ŷ BES017R BES 516-300-S166-02 LED 24.2 SUPERSHORTIES 8×8 mm Flush 1.5 mm 0...1.2 mm Ŷ BES041J BES Q08MEC-PSC15B-EP00,3-GS26 BES041K BES Q08MEC-POC15B-EP00,3-GS26 BES041L BES Q08MEC-NSC15B-EP00,3-GS26 BES041M BES Q08MEC-NOC15B-EP00,3-GS26 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Short design Brass-coated PBT 0.3 m PUR cable with M5 connector, 3-pin 37 30.5 M5x0.5 M5x0.5 M8x1 ■ www.balluff.com 499 DC 3-/4-wire Inductive Standard Sensors Block design, 8×8 mm Inductive sensors BES 8×8 mm Supershorties – The sensors with the ideal dimensions ■ Due to the miniature design, position sensing is now possible even where there used to be no space for a sensor. ■ Modules can be shrunk even more, since the sensors require less space ■ Optimal price/performance ratio ■ Robust through high-quality metal enclosure ■ High functional reserve through increased switching distance Common application examples ■ Linear units ■ Robotics and automation ■ Vibrating conveyors Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, normally open Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths on request 500 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Block design, 8×8 mm 8 5 20 10 5 10 M3 M3 M8×1 LED DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories LED 59 50 20 M3 20 26.7 LED Global DC 3-wire 8 3 8 3 Inductive sensors 20 Cast zinc PBT M8 connector, 3-pin SUPERSHORTIES 8×8 mm Flush 2 mm 0...1.6 mm ŶŶ BES041N BES Q08MEC-PSC20B-EP00,3-GS49 BES041P BES Q08MEC-POC20B-EP00,3-GS49 BES041R BES Q08MEC-NSC20B-EP00,3-GS49 BES041T BES Q08MEC-NOC20B-EP00,3-GS49 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Short design Brass-coated PBT 0.3 m PUR cable with M8 connector, 3-pin 5 Cast zinc PBT M8 connector, 3-pin SUPERSHORTIES 8×8 mm Flush 2 mm 0...1.6 mm ŶŶ BES041U BES Q08MEC-PSC20B-EP00,3-GS26 BES041W BES Q08MEC-POC20B-EP00,3-GS26 BES041Y BES Q08MEC-NSC20B-EP00,3-GS26 BES041Z BES Q08MEC-NOC20B-EP00,3-GS26 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Short design Brass-coated PBT 0.3 m PUR cable with M5 connector, 3-pin 3 5 10 8×8 mm Flush 2 mm 0...1.6 mm ŶŶ BES01UW BES Q08ZE-PSC20B-S49G BES01UK BES Q08ZE-POC20B-S49G BES01UC BES Q08ZE-NSC20B-S49G BES01U6 BES Q08ZE-NOC20B-S49G 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus 8 3 M3 8×8 mm Flush 2 mm 0...1.6 mm ŶŶ BES01U2 BES Q08ZC-PSC20B-S49G BES01TF BES Q08ZC-POC20B-S49G BES01T3 BES Q08ZC-NSC20B-S49G BES01RW BES Q08ZC-NOC20B-S49G 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus 10 SUPERSHORTIES 8×8 mm Flush 2 mm 0...1.6 mm ŶŶ BES03Y8 BES Q08MEC-PSC20B-S49G BES03U3 BES Q08MEC-POC20B-S49G BES03UC BES Q08MEC-NSC20B-S49G BES03YJ BES Q08MEC-NOC20B-S49G 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Short design Brass-coated PBT M8 connector, 3-pin M8x1 37 30.5 LED M5x0.5 M8x1 ■ www.balluff.com 501 DC 3-/4-wire Inductive Standard Sensors Block design, 8×8 mm SUPERSHORTIES Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection 8×8 mm Flush 2 mm 0...1.6 mm ŶŶ BES03U2 BES Q08MEC-PSC20B-EP02 BES03YK BES Q08MEC-POC20B-EP02 BES03UA BES Q08MEC-NOC20B-EP02 10...30 V DC 2.8 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus 8×8 mm Flush 2 mm 0...1.6 mm ŶŶ BES01TZ BES Q08ZC-PSC20B-BV02 BES01TA BES Q08ZC-POC20B-BV02 BES01T2 BES Q08ZC-NSC20B-BV02 BES01RU BES Q08ZC-NOC20B-BV02 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus 8×8 mm Flush 2 mm 0...1.6 mm ŶŶ BES01TN BES Q08ZC-PSC20B-BP02 BES01T7 BES Q08ZC-POC20B-BP02 BES01RZ BES Q08ZC-NSC20B-BP02 BES01TL BES Q08ZC-NOC20B-BP02 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus Brass-coated PBT 2 m PUR cable, 3×0.14 mm² Cast zinc PBT 2 m PVC cable, 3×0.14 mm² Cast zinc PBT 2 m PUR cable, 3×0.14 mm² Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 502 5 20 10 M3 Additional cable lengths and PUR cable jacket material available on request. 8 3 LED For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Block design, 8×8 mm TRIPLEPROX 8×8 mm Flush 2 mm 0...1.6 mm ŶŶ BES01UR BES Q08ZE-PSC20B-BV02 BES01UH BES Q08ZE-POC20B-BV02 BES01UA BES Q08ZE-NSC20B-BV02 8×8 mm Flush 2 mm 0...1.6 mm ŶŶ BES01UM BES Q08ZE-PSC20B-BP02 BES01UE BES Q08ZE-POC20B-BP02 BES01U7 BES Q08ZE-NSC20B-BP02 8×8 mm Flush 2.5 mm 0...2 mm ŶŶ BES01U3 BES Q08ZC-PSC25B-S49G 8×8 mm Flush 2.5 mm 0...2 mm ŶŶ BES01UY BES Q08ZE-PSC25B-S49G 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes 0...+70 °C 2 kHz Yellow LED IP 67 CE, cULus 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes 0...+70 °C 2 kHz Yellow LED IP 67 CE, cULus Cast zinc PBT 2 m PVC cable, 3×0.14 mm² Cast zinc PBT 2 m PUR cable, 3×0.14 mm² Cast zinc PBT M8 connector, 3-pin Cast zinc PBT M8 connector, 3-pin 8×8 mm Quasi-flush 3 mm 0...2.4 mm ŶŶŶ BES01U4 BES Q08ZC-PSC30B-S49G Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 1 kHz Yellow LED IP 67 CE Long range Brass-coated PBT M8 connector, 3-pin Special properties Analog distance measurement Accessories 8 59 50 20 M3 10 5 3 LED M8x1 ■ www.balluff.com 503 DC 3-/4-wire Inductive Standard Sensors Block designs, 8×16×4 mm R04 8×16×4 mm R04 Flush 1.5 mm 0...1.2 mm Ŷ BES01YC BES R04KC-PSC15B-EP00,2-GS26 BES01Y7 BES R04KC-POC15B-EP00,2-GS26 8×16×4 mm Flush 1.5 mm 0...1.2 mm Ŷ BES01YE BES R04KC-PSC15B-EP00,3-GS49 BES01Y8 BES R04KC-POC15B-EP00,3-GS49 BES01WY BES R04KC-NOC15B-EP00,2-GS26 10...30 V DC 1.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 600 Hz Yellow LED IP 67 CE, cULus PA 6 PA 6/GF 30 0.2 m PUR cable with M5 connector, 3-pin 10...30 V DC 1.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 600 Hz Yellow LED IP 67 CE, cULus PA 6 PA 6/GF 30 0.3 m PUR cable with M8 connector, 3-pin 8×16×4 mm R04 Flush 1.5 mm 0...1.2 mm Ŷ BES01YJ BES R04KC-PSC15B-EV02 BES03J1 BES R04KC-POC15B-EV02 BES01Y3 BES R04KC-NSC15B-EV02 BES01WZ BES R04KC-NOC15B-EV02 10...30 V DC 1.8 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED IP 67 CE, cULus PA 6 PA 6/GF 30 2 m PVC cable, 3×0.09 mm² Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 4.7 Additional cable lengths and PUR cable jacket material available on request. 4 4 Ø5.7 Ø2.6 8 12 16 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, normally open Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 30.5 LED M5x0.5 504 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire 8×16×4 mm R04 Flush 1.5 mm 0...1.2 mm Ŷ BES01YF BES R04KC-PSC15B-EP02 Block designs, 8×16×4 mm R04 8×16×4 mm R04 Not flush 2.5 mm 0...2.2 mm ŶŶ BES01YM BES R04KC-PSC25F-EP00,3-GS49 BES0447 BES R04KC-POC25F-EP00,3-GS49 8×16×4 mm R04 Not flush 2.5 mm 0...2 mm ŶŶ BES01YT BES R04KC-PSC25F-EV02 8×16×4 mm R04 Not flush 2.5 mm 0...2.2 mm ŶŶ BES01YN BES R04KC-PSC25F-EP02 8×16×4 mm R04 Not flush 2.5 mm 0...2 mm ŶŶ Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs BES03R8 BES R04KC-NSC25F-EP02 DC 2-wire AC/DC 2-wire AC 2-wire 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus PA 6 PA 6/GF 30 2 m PUR cable, 3×0.1 mm² LED Special properties Analog distance measurement Accessories 4.7 4 4 8 Ø5.7 4 Ø5.7 Ø2.6 4 12 16 Ø5.7 Ø2.6 LED ■ www.balluff.com 4.7 8 4 12 4.7 8 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 150 Hz Yellow LED IP 67 CE, cULus PA 6 PA 6/GF 30 2 m PUR cable, 3×0.1 mm² 16 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 150 Hz Yellow LED IP 67 CE, cULus PA 6 PA 6/GF 30 2 m PVC cable, 3×0.09 mm² Ø2.6 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus PA 6 PA 6/GF 30 0.3 m PUR cable with M8 connector, 3-pin 12 16 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED IP 67 CE, cULus PA 6 PA 6/GF 30 2 m PUR cable, 3×0.1 mm² LED 505 DC 3-/4-wire Inductive Standard Sensors Block designs, 10×30×6 mm R03 10×30×6 mm R03 Flush 2 mm 0...1.6 mm Ŷ BES03J0 BES R03KC-PSC20B-EP02 10...30 V DC 1.5 V 75 V DC 100 mA No/No/Yes –25...+70°C 1 kHz Yellow LED IP 67 CE, cULus PA 6 PA 6 2 m PUR cable, 3×0.14 mm² 10 10×30×6 mm R03 Flush 3 mm 0...2.4 mm Ŷ BES01WR BES R03KC-PSC30B-EP02 10...30 V DC 2.5 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus PA 6 PA 6 2 m cable TPU, 3×0.14 mm² 10 Ø3.2 5 6 LED 506 90° 90° 27 22 Additional cable lengths and PUR cable jacket material available on request. Ø3.2 5 6 27 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 10×30×6 mm R03 Flush 3 mm 0...2.4 mm Ŷ BES01WP BES R03KC-PSC30B-BP00,3-GS49 BES045C BES R03KC-NSC30B-BP00,3-GS49 10...30 V DC 1.8 V 75 V DC 100 mA Yes/Yes/Yes –25...+70°C 3 kHz Yellow LED IP 67 CE, cULus PA 6 PA 6 0.3 m PUR cable with M8 connector, 3-pin 22 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number NPN, normally open Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection LED For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Block designs, 10×30×6 mm R03, 30×20×10 mm 10×30×6 mm R03 Not flush 3 mm 0...2.4 mm Ŷ BES02ZN BES R03KC-PSC30F-BV00.2-GS49 10×30×6 mm R03 Not flush 3 mm 0...2.4 mm Ŷ BES0397 BES R03KC-PSC30F-BV00.3-GS04 10...30 V DC 1.5 V 75 V DC 100 mA No/No/Yes –25...+70°C 500 Hz Yellow LED IP 67 10...30 V DC 1.5 V 75 V DC 100 mA No/No/Yes –25...+70°C 500 Hz Yellow LED IP 67 PA 6 PA 6 0.2 m PVC cable with M8 connector, 3-pin PA 6 PA 6 0.3 m PVC cable with M12 connector, 3-pin 30×20×10 mm Flush 2 mm 0...1.6 mm Ŷ BES033J BES 516-300-S279 BES033H BES 516-300-S255 10...30 V DC 0.5 V 75 V DC 50 mA Yes/No/No –25...+70°C 1.5 kHz Yes/No IP 65 Anodized GD-Al PBT 5 m PVC cable, 3×0.14 mm² Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 6 41.5 Ø3.2 8 90˚ 17 30 10 LED Recommended short-circuit protection equipment: Miniature fuse in accordance with IEC 60127-2 Sheet 1, ≤ 2 A (fast-acting). The fuse has to be in the load current; the fuse may not be placed in the output wiring. M12x1 ■ www.balluff.com 507 DC 3-/4-wire Inductive Standard Sensors Block designs, 16×30×10 mm Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number NPN, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 16×30×10 mm Flush 2 mm 0...1.6 mm Ŷ BES01N2 BES 517-398-N2-C BES01MK BES 517-351-N2-C BES01NE BES 517-399-N2-C BES01MW BES 517-352-N2-C 16×30×10 mm Flush 2 mm 0...1.6 mm Ŷ BES01N1 BES 517-398-N1-C BES01MJ BES 517-351-N1-C BES01NC BES 517-399-N1-C BES01MU BES 517-352-N1-C 16×30×10 mm Flush 2 mm 0...1.6 mm Ŷ BES01NA BES 517-398-NO-C-S49-00,2 BES01MT BES 517-351-NO-C-S49-00.2 BES01NM BES 517-399-NO-C-S49-00,2 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED Housing IP 65 CE PBT PBT DIN-46244plug connector 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED Housing IP 65 CE PBT PBT DIN-46244plug connector 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED IP 65 CE PBT PBT 0.2 m PUR cable with M8 connector, x-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 508 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 10...30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 2.5 kHz Yellow LED IP 65 CE PBT PBT 2 m PVC cable, 3×0.14 mm² 20×32×8 mm R01 Flush 5 mm 0...4.1 mm Ŷ 20×32×8 mm R01 Flush 7 mm 0...5.6 mm Ŷ BES01WF BES R01ZC-PSC70B-BP00.3-GS49 BES01W1 BES R01ZC-NSC70B-BP00.2-GS49 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire BES03Z2 BES R01ZC-NAC50B-BP02 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 150 Hz Yellow LED IP 67 CE, cULus Cast zinc PA 12 2 m PUR cable, 4×0.14 mm² Special properties 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 150 Hz Yellow LED IP 67 CE, cULus Cast zinc PA 12 0.3 m PUR cable with M8 connector, 3-pin 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 150 Hz Yellow LED IP 67 CE, cULus Cast zinc PA 12 0.2 m PUR cable with M8 connector, 3-pin M8x1 ■ www.balluff.com 20×32×8 mm R01 Flush 7 mm 0...5.6 mm Ŷ BES01WE BES R01ZC-PSC70B-BP00.2-GS49 max. 39 16×30×10 mm Flush 2 mm 0...1.6 mm Ŷ BES01N4 BES 517-398-NO-C-02 BES01ML BES 517-351-NO-C-02 BES01NF BES 517-399-NO-C-02 BES01MY BES 517-352-NO-C-02 Block designs, 16×30×10 mm R01, 20×32×8 mm max. 39 3-/4-Wire Analog distance measurement Accessories M8x1 509 DC 3-/4-wire Inductive Standard Sensors Block designs, 20×32×8 mm R01 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, complementary Ordering code Part number NPN, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 20×32×8 mm R01 Flush 7 mm 0...5.6 mm Ŷ BES02PT BES R01ZC-PSC70B-BP00.2-GS04-101 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 150 Hz Yellow LED IP 67 CE, cULus Cast zinc With ceramic coating 0.2 m PUR cable with M12 connector, 4-pin 20×32×8 mm R01 Flush 7 mm 0...5.6 mm Ŷ 20×32×8 mm R01 Flush 7 mm 0...5.6 mm Ŷ BES01W2 BES R01ZC-PAC70B-BP00.2-GS04 BES01UZ BES R01ZC-NAC70B-BP00.2-GS04 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 150 Hz Yellow LED IP 67 CE, cULus Cast zinc PA 12 BES0314 BES R01ZC-PAC70B-BP00.2-GS04-107 0.2 m PVC cable with M12 connector, 4-pin 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 150 Hz Yellow LED IP 67 CE, cULus Cast zinc With ceramic coating 0.2 m PUR cable with M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 510 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire 20×50×10 mm Flush 5 mm 0...4.1 mm Ŷ BES01FR BES 516-347-M0-C-S49 Block designs, 20×50×10 mm 20×50×10 mm Flush 5 mm 0...4.1 mm Ŷ BES01FT BES 516-347-M0-C-S49-00,2 20×50×10 mm Flush 5 mm 0...4.1 mm Ŷ BES01FN BES 516-347-M0-C-S4-00,2 BES0153 BES 516-133-M0-C-S4-00,2 20×50×10 mm Flush 5 mm 0...4.1 mm Ŷ BES01FH BES 516-347-M0-C-02 BES0179 BES 516-133-M0-C-02 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 67 CE, cULus Cast aluminum PBT M8 connector, 3-pin 0.2 m PUR cable with M8 connector, 3-pin 0.2 m PUR cable with M12 connector, 4-pin 2 m PVC cable, 3×0.34 mm² AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 8 LED 50 LED 8 10 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 67 CE, cULus Cast aluminum PBT 50 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 67 CE, cULus Cast aluminum PBT 10 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 67 CE, cULus Cast aluminum PBT M8x1 ■ www.balluff.com 511 DC 3-/4-wire Inductive Standard Sensors Block designs, 26×40×12 mm R05 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 26×40×12 mm R05 Flush 2 mm 0...1.6 mm Ŷ BES01Z7 BES R05KB-PSC20B-S49A 26×40×12 mm R05 Flush 2 mm 0...1.6 mm Ŷ BES01Z3 BES R05KB-PSC20B-BP00,3-GS49 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 400 Hz Yellow LED IP 67 CE, cULus PA 12 PA 12 M8 connector, 3-pin 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 400 Hz Yellow LED IP 67 CE, cULus PA 12 PA 12 0.3 m PUR cable with M8 connector, 3-pin Sensing surface Sensing surface Additional cable lengths and PUR cable jacket material available on request. max. 40 512 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire 26×40×12 mm R05 Flush 2 mm 0...1.6 mm Ŷ BES01Z4 BES R05KB-PSC20B-EP02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 400 Hz Yellow LED IP 67 CE, cULus PA 12 PA 12 2 m PUR cable, 3×0.34 mm² 26×40×12 mm R05 Flush 4 mm 0...3.2 mm Ŷ BES01ZE BES R05KB-PSC40B-S49A BES01Z2 BES R05KB-POC40B-S49A BES01Z1 BES R05KB-NSC40B-S49A 10...30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25...+70°C 400 Hz Yellow LED IP 67 CE, cULus PA 12 PA 12 M8 connector, 3-pin Sensing surface 26×40×12 mm R05 Flush 4 mm 0...3.2 mm Ŷ BES01Z8 BES R05KB-PSC40B-EP00,3-GS04 26×40×12 mm R05 Flush 4 mm 0...3.2 mm Ŷ BES01ZA BES R05KB-PSC40B-EV02 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 400 Hz Yellow LED IP 67 CE, cULus PA 12 PA 12 0.3 m PUR cable with M12 connector, 4-pin Sensing surface BES01YW BES R05KB-NOC40B-EV02 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 400 Hz Yellow LED IP 67 CE, cULus PA 12 PA 12 2 m PVC cable, 3×0.34 mm² AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Sensing surface max. 49 Sensing surface Block designs, 26×40×12 mm R05 ■ www.balluff.com 513 DC 3-/4-wire Inductive Standard Sensors Block designs, 42×48×22 mm Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number PNP, complementary Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 42×48×22 mm Flush 5 mm 0...4.1 mm Ŷ BES01FC BES 516-346-H2-Y BES01EU BES 516-341-H2-Y BES01ZK BES 516-344-H2-Y BES01ET BES 516-340-H2-Y 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 67 CE Cast aluminum PA 12 Screw terminals up to 2.5 mm² 42×48×22 mm Flush 5 mm 0...4.1 mm Ŷ BES01FF BES 516-346-H2-Y-S49 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 67 CE Cast aluminum PA 12 M8 connector, 3-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 514 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire 42×48×22 mm Flush 5 mm 0...4.1 mm Ŷ BES01FE BES 516-346-H2-Y-S4 BES01EW BES 516-341-H2-Y-S4 Block designs, 42×48×22 mm, 74×60.5×28 mm 74×60.5×28 mm Flush 7 mm 0...5.7 mm Ŷ Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs BES017M BES 516-161-H3-L DC 2-wire AC/DC 2-wire AC 2-wire Special properties 10...30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –25...+70°C 500 Hz Yellow LED IP 67 CE Cast aluminum PA 12 M12 connector, 4-pin 10...30 V DC 1.5 V 75 V DC 400 mA Yes/No/No –25...+70°C 300 Hz Yellow LED IP 67 CE Cast aluminum PA 12 Screw terminals up to 2.5 mm² Analog distance measurement Accessories Recommended short circuit protection equipment: Miniature fuse in accordance with IEC60127-2 Sheet 1, ≤ 2 A (fast-acting). The fuse has to be in the load current; the fuse may not be placed in the output wiring. ■ www.balluff.com 515 DC 3-/4-wire Inductive Standard Sensors Block design, 40×40 mm Unicompact Note permissible installation variants. Unicompact The Unicompact is a flexible sensor for versatile application in mechanical and systems engineering and wherever space is at a premium. The sensing surface is convertible. The connection can be rotated in all directions. With it, angle plugs are also positioned optimally at all time. Compact sensor designs with large switching distances are required in material handling technology. In addition, the switching and operating state of the sensor must be able to be identified from far away. 516 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Block design, 40×40 mm Unicompact Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Possible installation variations Connection 40×40 mm Unicompact Flush 20 mm 0...16 mm Ŷ BES021W BES Q40KFU-PSC20B-S04G BES0217 BES Q40KFU-PAC20B-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE, cULus PBT PBT Image 1...8 M12 connector, 4-pin 40×40 mm Unicompact Flush 20 mm 0...16 mm Ŷ BES0218 BES Q40KFU-PAC20B-S04G-004 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT PBT Image 1...8 M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Row mounting Flush 80 mm Ø 120 mm non-flush Permissible installation options Fig. 1 ■ www.balluff.com Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 517 DC 3-/4-wire Inductive Standard Sensors Block design, 40×40 mm Unicompact 40×40 mm Flush 20 mm 0...16 mm Ŷ 40×40 mm Flush 20 mm 0...16.2 mm Ŷ BES0306 BES Q40KFU-PSC20B-S04G-012 BES03PN BES Q40KHU-PAC20B-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE, cULus PBT/Cast zinc PBT Image 1...8 M12 connector, 4-pin 54 66 25 65 30 40 40 40 40 46 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 67 CE, cULus PA PA Image 1...8 M12 connector, 4-pin 62 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, complementary Ordering code Part number NPN, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Possible installation variations Connection Housing optimized for material handling technology ■ Highly visible corner LEDs ■ Sensor head can be mounted in five positions ■ Connector outlet set to position within a 270° range 20 5.5 M12x1 • • 30 20 34 330º M12x1 518 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire 40×40 mm Not flush 25 mm 0...20 mm Ŷ Block design, 40×40 mm Unicompact 40×40 mm Not flush 25 mm 0...20 mm Ŷ BES0210 BES Q40KEU-PAH25F-S04G BES022J BES Q40KFU-NAC25F-S04G 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE, cULus PBT PBT Image 3...8 M12 connector, 4-pin 40×40 mm Not flush 30 mm 0...24 mm Ŷ BES021Z BES Q40KFU-PSC30F-S04G BES021E BES Q40KFU-PAC30F-S04G 40×40 mm Not flush 40 mm 0...32.4 mm ŶŶ BES0308 BES Q40KFU-PSC40F-S04G-012 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT/Cast zinc PBT Image 3...8 M12 connector, 4-pin 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE, cULus PBT PBT Image 3...8 M12 connector, 4-pin AC/DC 2-wire 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 60 Hz Yellow LED IP 67 CE, cULus PA PA Image 3...8 M12 connector, 4-pin AC 2-wire Special properties Analog distance measurement Accessories 54 66 40 5.5 46 40 M12x1 • • 30 ■ www.balluff.com 519 DC 3-/4-wire Inductive Standard Sensors Block design, 40×40 mm Unisensor Note permissible installation variants. The Unisensor – multiple uses ■ The Unisensor is made up of three modular components: sensor head including sensor head base), sensor body and sensor base. ■ Easily removable pin contacts join sensor head and sensor body, e.g. easy interchange of the modules without wiring. ■ Sensor base with wiring terminals, self-lifting pressure plates and ample wiring room. ■ Sensor head rotatable in five different positions for easy adaptation to any application (see installation drawings). ■ PBT plastic housing. ■ Mounting dimensions and values are based on DIN EN 60947-5-2 ■ LED for supply voltage and output function indicator ■ Also available in special configuration for the automotive industry ■ In the complementary version, output terminals 2 or 4 can be wired to configure the switch as normally closed (terminal 2) or normally open (terminal 4). By assigning both terminals, the complementary function can be used. Positioning the sensor head ■ Loosen the two holding screws on the sensor head. ■ Rotate the sensor head 180°. ■ Tighten the holding screws. Rotate the sensor head. ■ Loosen the holding screws. ■ Rotate the sensor head (complete with sensor head base) into the desired position. ■ Tighten the holding screws. ■ Sensor head is protected against over-rotation. Sensor body Sensor head Sensor head base Sensor base 520 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire Block design, 40×40 mm Unisensor Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Possible installation variations Connection 40×40×120 mm Unisensor Flush 15 mm 0...12 mm Ŷ BES0201 BES 517-132-M3-H 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 67 CE PBT PBT Image 1...5 Screw terminal, metric cable gland 40×40×120 mm Unisensor Flush 15 mm 0...12 mm Ŷ BES023F BES 517-132-U3-H 10...55 V DC 2.5 V 250 V AC 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 67 CE PBT PBT Image 1...5 Screw terminal, cable gland NPT Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Row mounting Installation variations Fig. 1 ■ www.balluff.com Fig. 2 Fig. 3 Fig. 4 Fig. 5 521 DC 3-/4-wire Inductive Standard Sensors Block design, 40×40 mm Unisensor Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, complementary Ordering code Part number NPN, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Possible installation variations Connection 40×40×120 mm Unisensor Flush 15 mm 0...12 mm Ŷ BES0202 BES 517-132-M3-H-S4 BES020H BES 517-134-M3-H-S4 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 67 CE, cULus PBT PBT Image 1...5 M12 connector, 4-pin 40×40×120 mm Unisensor Flush 15 mm 0...12 mm Ŷ BES023J BES 517-132-U3-H-S5 10...55 V DC 2.5 V 250 V AC 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 67 CE PBT PBT Image 1...5 7/8" 16UN plug connector, 5-pin Ø5.3 120 7.3 46 40 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 7.3 6.5 60 LED 7/8“-16UN 30 522 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 40×40×120 mm Unisensor Flush 20 mm 0...16 mm Ŷ BES023L BES 517-132-U6-H 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT/aluminum PBT Image 1...5 Screw terminal, cable gland NPT 40×40×120 mm Unisensor Flush 20 mm 0...16 mm Ŷ BES020A BES 517-132-M6-H-S4 BES020N BES 517-134-M6-H-S4 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT PBT Image 1...5 M12 connector, 4-pin 40×40×120 mm Unisensor Flush 20 mm 0...16 mm Ŷ Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs BES020P BES 517-134-M6-H-S5 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT PBT Image 1...5 7/8" 16UN plug connector, 5-pin DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Ø5.3 120 7.3 46 40×40×120 mm Unisensor Flush 20 mm 0...16 mm Ŷ BES0209 BES 517-132-M6-H BES020M BES 517-134-M6-H 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT PBT Image 1...5 Screw terminal, metric cable gland Block design, 40×40 mm Unisensor 40 3-/4-Wire 7.3 6.5 60 LED 7/8“-16UN 30 ■ www.balluff.com 523 DC 3-/4-wire Inductive Standard Sensors Block design, 40×40 mm Unisensor Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, complementary Ordering code Part number NPN, complementary Ordering code Part number Supply voltage UBS Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Possible installation variations Connection 40×40×120 mm Unisensor Not flush 20 mm 0...16 mm Ŷ 40×40×120 mm Unisensor Not flush 20 mm 0...16 mm Ŷ BES0204 BES 517-132-M4-H BES020J BES 517-134-M4-H 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 67 CE PBT PBT Image 3...5 Screw terminal, metric cable gland BES0205 BES 517-132-M4-H-S4 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 67 CE PBT PBT Image 3...5 M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 524 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 40×40×120 mm Unisensor Not flush 25 mm 0...20 mm Ŷ BES0235 BES 517-385-MV-C 40×40×120 mm Unisensor Not flush 25 mm 0...20 mm Ŷ BES0236 BES 517-385-V-C-S4 10...30 V DC 3.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT PBT Image 3...5 M12 connector, 4-pin 40×40×120 mm Unisensor Not flush 25 mm 0...20 mm Ŷ Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire BES0312 BES 517-134-U4-H-S5 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 100 Hz Yellow LED IP 67 CE, cULus PBT PBT Image 3...5 7/8" 16UN plug connector, 5-pin AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Ø5.3 120 7.3 46 10...30 V DC 3.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT PBT Image 3...5 Screw terminal, metric cable gland Block design, 40×40 mm Unisensor 40 3-/4-Wire 7.3 6.5 60 LED 7/8“-16UN 13 16 40 30 40 ■ www.balluff.com 525 DC 3-/4-wire Inductive Standard Sensors Block design, 40×40 mm Unisensor Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, complementary Ordering code Part number NPN, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Possible installation variations Connection 40×40×120 mm Unisensor Not flush 30 mm 0...24 mm Ŷ BES0206 BES 517-132-M5-H 40×40×120 mm Unisensor Not flush 30 mm 0...24 mm Ŷ BES020K BES 517-134-M5-H 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 60 Hz Yellow LED IP 67 CE PBT PBT Image 3...5 Screw terminal, metric cable gland BES023N BES 517-134-U5-H 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 60 Hz Yellow LED IP 67 CE PBT/aluminum PBT Image 3...5 Screw terminal, cable gland NPT Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 526 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire 40×40×120 mm Unisensor Not flush 30 mm 0...24 mm Ŷ BES0207 BES 517-132-M5-H-S4 Block design, 40×40 mm Unisensor 40×40×120 mm Unisensor Not flush 40 mm 0...32 mm Ŷ BES020C BES 517-132-M7-H 40×40×120 mm Unisensor Not flush 40 mm 0...32 mm Ŷ BES023M BES 517-132-U7-H 40×40×120 mm Unisensor Not flush 40 mm 0...32 mm Ŷ BES020E BES 517-132-M7-H-S4 Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 60 Hz Yellow LED IP 67 CE PBT PBT Image 3...5 M12 connector, 4-pin ■ www.balluff.com 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT PBT Image 3...5 Screw terminal, metric cable gland 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT/aluminum PBT Image 3...5 Screw terminal, cable gland NPT 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT PBT Image 3...5 M12 connector, 4-pin AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 527 DC 3-/4-wire Inductive Standard Sensors Block design, 80×80 mm Maxisensor Flush mount Series Installation type (pay attention to the note in the Basic Information chapter) Fig. 1 Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, complemen- Ordering code Part number tary NPN, complemen- Ordering code Part number tary Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Non-flush mount 80×80×40 mm Maxisensor Flush 40 mm 0...32 mm Ŷ BES023P BES 517-139-M4-H 10...55 V DC 2.5 V 250 V AC ([) 200 mA Polarity reversal protected/transposition protected/short-circuit protected Yes/Yes/Yes Ambient temperature Ta –15...+70 °C Switching frequency f max. 50 Hz Output function indicator Yellow LED Degree of protection as per IEC 60529 IP 67 Approvals CE Material Housing PBT Sensing surface PBT Possible installation variations Image 5...8 Connection Screw terminal, metric cable gland Fig. 2 Fig. 3 Connection-Switching diagram, see page 906 Switching distance markings can be found on page 911 Fig. 4 Minimum distances with steel h 40 mm 70 mm A 70 mm 80 mm B 80 mm 90 mm C 90 mm 100 mm Minimum distances with aluminum h 40 mm 70 mm A 0 mm 10 mm B 10 mm 20 mm C 10 mm 20 mm The change of the real switching distance sr is ≤ 10 % with these installation dimensions. Mounting in steel Fig. 5 528 Mounting in nonferrous metals Fig. 6 Mounting in steel/nonferrous metals Fig. 7 Mounting on steel/nonferrous metals Fig. 8 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire 80×80×40 mm Maxisensor Flush 40 mm 0...32 mm Ŷ BES020R BES 517-140-M4-H 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT PBT Image 5...8 Screw terminal, metric cable gland ■ www.balluff.com Block design, 80×80 mm Maxisensor 80×84×40 mm Maxisensor Flush 40 mm 0...32 mm Ŷ BES0227 BES Q80KA-PSH40B-S04Q BES0225 BES Q80KA-PAH40B-S04Q 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 50 Hz Yellow LED IP 67 CE PBT PBT Fig. 1 M12 connector, 4-pin 80×80×40 mm Maxisensor Flush 40 mm 0...32 mm Ŷ Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs BES020T BES 517-140-M4-H-S4 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT PBT Image 5...8 M12 connector, 4-pin DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 529 DC 3-/4-wire Inductive Standard Sensors Block design, 80×80 mm Maxisensor Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, complemenOrdering code Part number tary NPN, complemen- Ordering code Part number tary Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie 80×92×40 mm Maxisensor Flush 50 mm 0...40.5 mm Ŷ 80×80×40 mm Maxisensor Not flush 50 mm 0...40 mm Ŷ BES030C BES Q80KA-PAC50B-S04Q-U BES023R BES 517-139-M5-H BES020U BES 517-140-M5-H 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 100 Hz Yellow LED IP 67 CE PBT PBT Image 7, 8 Screw terminal, metric cable gland 10...36 V DC 2.5 V 250 V AC ([) 250 mA Polarity reversal protected/transposition protected/short-circuit protected Yes/Yes/Yes Ambient temperature Ta –25...70 °C Switching frequency f max. 70 Hz Output function indicator Yellow LED Degree of protection as per IEC 60529 IP 67 Approvals CE, cULus Material Housing PPE Sensing surface PPE Possible installation variations Connection M12 connector, 4-pin Connection-Switching diagram, see page 906 Switching distance markings can be found on page 911 530 For more information, visit us online! DC 3-/4-wire Inductive Standard Sensors 3-/4-Wire 80×80×40 mm Maxisensor Not flush 50 mm 0...40 mm Ŷ BES020W BES 517-140-M5-H-S4 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 100 Hz Yellow LED IP 67 CE PBT PBT Image 7, 8 M12 connector, 4-pin ■ www.balluff.com Block design, 80×80 mm Maxisensor 80×80×40 mm Maxisensor Not flush 50 mm 0...40 mm Ŷ BES023W BES 517-139-U5-H-S4 80×84×40 mm Maxisensor Not flush 50 mm 0...40 mm Ŷ BES0228 BES Q80KA-PSH50F-S04Q BES0226 BES Q80KA-PAH50F-S04Q Inductive sensors Global DC 3-wire DC 3-/4-wire Cylinder designs Block designs DC 2-wire 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...70 °C 100 Hz Yellow LED IP 67 CE, cULus PBT PBT Image 7, 8 M12 connector, 4-pin 10...55 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+70°C 50 Hz Yellow LED IP 67 CE PBT PBT Image 2...4 M12 connector, 4-pin AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 531 Inductive Sensors DC 2-wire inductive sensors Our standard line of 2-wire DC versions. This extensive line includes sensors from M8 to M30 as well as block designs for practically every application in automation. 532 For more information, visit us online! DC 2-wire Inductive Sensors Contents Cylinder designs M8×1 M12×1 M18×1 M30×1.5 535 537 540 543 Block designs 20×32×8 mm (R01) 26×26×26 mm (Z03) 40×66×40 mm (Unicompact) 40×121×40 mm (Unisensor) 80×92×40 mm (maxi-sensor) 546 547 548 549 550 Basic information and definitions can be found on page 884. ■ www.balluff.com 533 DC 2-wire Inductive Sensors DC-2-wire sensors can be used universally: they can be used in conjunction with most PNP or NPN controllers. Use of these sensors enables a reduction in the number of inventoried part numbers. Suitability of the 2-wire sensors for the respective PNP or NPN controller should be tested in advance. Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Polarized, NO Ordering code Part number Polarized, NC Ordering code Part number Non-polarized, NO Ordering code Part number Non-polarized, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Minimum operating current Im Residual current Ir max. Permissible load capacitance max. Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Global: The complete series of standard sensors Inductive standard sensors are mostly available ex warehouse, can be used around the world and meet worldwide standards. They offer an optimal price/performance ratio. ■ Short and mid-size designs Ø 6.5 mm to M30×1.5 ■ Shielded and unshielded designs ■ Cable and connector versions ■ Standard and extended switching distance Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths on request Recommendation for connection wiring for polarized sensors on 3-wire controllers PNP, NO NPN, NO Controller input Controller input Controller input Controller input Controller input Controller input PNP, NC NPN, NC Controller input Controller input 534 For more information, visit us online! DC 2-wire Inductive Sensors Cylinder designs, M8×1 M8×1 Flush 2 mm 0 to 1.6 mm ŶŶ BES0022 BES M08ME1-GSC20B-S04G BES024N BES M08ME1-GOC20B-S04G BES001Y BES M08ME1-USC20B-S04G BES024P BES M08ME1-UOC20B-S04G 10...36 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.5 kHz Yellow LED IP 67 CE, cULus Brass-coated PBT M8×1 Flush 2 mm 0 to 1.6 mm ŶŶ 10...55 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.5 kHz Yellow LED IP 67 CE Brass-coated PBT M12 connector, 4-pin M12 connector, 4-pin M8×1 Flush 2 mm 0 to 1.4 mm ŶŶ BES00C0 BES M08ME1-GSC20B-S04G-101 M8x1 M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire Cylinder designs Block designs AC/DC 2-wire 10...36 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.5 kHz Yellow LED IP 67 CE, cULus Brass-coated PBT AC 2-wire Special properties Analog distance measurement Accessories 0.3 m PUR cable with M12 connector, 4-pin M8x1 13 29.5 29.5 50 50 50 29.5 BES031N BES 516-527-S4-H 10...55 V DC 5V 75 V DC 130 mA 5 mA 500 μA 1 μF Yes/Yes/Yes –25...+70 °C 3 kHz Yellow LED IP 67 CE, cULus Stainless steel PBT 10...30 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.5 kHz Yellow LED IP 67 CE, cULus Brass-coated With ceramic coating M12 connector, 4-pin 13 Ø10.7 Ø10.7 Ø10.7 LED LED LED M12x1 M12x1 ■ www.balluff.com M8×1 Flush 2 mm 0 to 1.6 mm ŶŶ BES001Z BES M08MG-GSC20B-BP00,3-GS04 BES03H8 BES M08MG-GOC20B-BP00,3-GS04 BES03KP BES M08ME1-USH20B-S04G M8x1 13 M8×1 Flush 1.5 mm 0 to 1.2 mm Ŷ M12x1 535 DC 2-wire Inductive Sensors Cylinder designs, M8×1 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Polarized, NO Ordering code Part number Polarized, NC Ordering code Part number Non-polarized, NO Ordering code Part number Non-polarized, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Minimum operating current Im Residual current Ir max. Permissible load capacitance max. Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface M8×1 Flush 2 mm 0 to 1.6 mm ŶŶ BES03KR BES M08MG-GSH20B-BP00,3-GS04 M8×1 Flush 2 mm 0 to 1.4 mm ŶŶ BES0324 BES M08MG-GSC20B-BP00,3-GS04-101 10...55 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.5 kHz Yellow LED IP 67 CE Brass-coated PBT Connection 0.3 m PUR cable with M12 connector, 4-pin 10...30 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.5 kHz Yellow LED IP 67 CE, cULus Brass-coated With ceramic coating 0.3 m PUR cable with M12 connector, 4-pin M8×1 Flush 2 mm 0 to 1.6 mm ŶŶ BES001L BES M08MG-GSC20B-BV02 BES024R BES M08MG-GOC20B-BV02 BES001T BES M08MG-USC20B-BV02 BES024T BES M08MG-UOC20B-BV02 10...36 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.5 kHz Yellow LED IP 67 CE, cULus Brass-coated PBT 2 m PVC cable, 2×0.14 mm² Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 536 For more information, visit us online! DC 2-wire Inductive Sensors Cylinder designs, M8×1, M12×1 M12×1 Flush 3 mm 0 to 2.2 mm ŶŶ BES00C1 BES M12MF-GSC30B-S04G-101 BES03KT BES M08MG-USH20B-BV02 10...55 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.5 kHz Yellow LED IP 67 CE Brass-coated PBT 10...36 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.3 kHz Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 2×0.14 mm² M12 connector, 4-pin 10...30 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.5 kHz Yellow LED IP 67 CE, cULus Brass-coated With ceramic coating M12 connector, 4-pin M12x1 M12x1 Global DC 3-wire BES0041 BES M12MF-USC30B-S04G BES024K BES M12MF-UOC30B-S04G 10...36 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.3 kHz Yellow LED IP 67 CE, cULus Brass-coated PA 12 10...55 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.3 kHz Yellow LED IP 67 CE Brass-coated PA 12 M12 connector, 4-pin M12 connector, 4-pin BES03KU BES M12MF-USH30B-S04G DC 2-wire Cylinder designs Block designs AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories M12x1 35.5 35.5 17 50 35.5 Inductive sensors DC 3-/4-wire 17 50 ■ www.balluff.com M12×1 Flush 3 mm 0 to 2.4 mm ŶŶ M12x1 17 35.5 17 M12×1 Flush 3 mm 0 to 2.4 mm ŶŶ 50 M12×1 Flush 3 mm 0 to 2.4 mm ŶŶ BES003Z BES M12MF-GSC30B-S04G BES024J BES M12MF-GOC30B-S04G 50 M8×1 Flush 2 mm 0 to 1.6 mm ŶŶ Ø10.7 Ø10.7 Ø10.7 Ø10.7 LED LED LED LED M12x1 M12x1 M12x1 M12x1 537 DC 2-wire Inductive Sensors Cylinder design, M12×1 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Polarized, NO Ordering code Part number Polarized, NC Ordering code Part number Non-polarized, NO Ordering code Part number Non-polarized, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Minimum operating current Im Residual current Ir max. Permissible load capacitance max. Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface M12×1 Flush 3 mm 0...2.4 mm ŶŶ BES0042 BES M12MG-GSC30B-BP00,3-GS04 BES03HK BES M12MG-GOC30B-BP00,3-GS04 M12×1 Flush 3 mm 0...2.2 mm ŶŶ BES0326 BES M12MG-GSC30B-BP00,3-GS04-101 M12×1 Flush 3 mm 0...2.4 mm ŶŶ BES03KW BES M12MG-GSH30B-BP00,3-GS04 10...36 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.3 kHz Yellow LED IP 67 CE, cULus Brass-coated PA 12 10...55 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.3 kHz Yellow LED IP 67 CE Brass-coated PA 12 Connection 0.3 m PUR cable with M12 connector, 4-pin 10...30 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.3 kHz Yellow LED IP 67 CE, cULus Brass-coated With ceramic coating 0.3 m PUR cable with M12 connector, 4-pin M12x1 17 17 LED 538 M12x1 17 M12x1 LED 46 46 40 43 M12x1 40 43 M12x1 46 Additional cable lengths and PUR cable jacket material available on request. M12x1 40 43 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 0.3 m PUR cable with M12 connector, 4-pin LED For more information, visit us online! DC 2-wire Inductive Sensors Cylinder design, M12×1 M12×1 Flush 3 mm 0...2.4 mm ŶŶ BES0045 BES M12MG-GSC30B-BV02 BES024L BES M12MG-GOC30B-BV02 M12×1 Flush 3 mm 0...2.4 mm ŶŶ M12×1 Flush 3 mm 0...2.4 mm ŶŶ Global DC 3-wire DC 3-/4-wire 10...36 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.3 kHz Yellow LED IP 67 CE, cULus Brass-coated PA 12 BES004T BES M12MG-USC30B-BV02 BES024M BES M12MG-UOC30B-BV02 10...36 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.3 kHz Yellow LED IP 67 CE, cULus Brass-coated PA 12 10...55 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 1.3 kHz Yellow LED IP 67 CE Brass-coated PA 12 2 m PVC cable, 2×0.34 mm² 2 m PVC cable, 2×0.34 mm² 2 m PVC cable, 2×0.34 mm² ■ www.balluff.com Inductive sensors BES03KN BES M12MG-USH30B-BV02 DC 2-wire Cylinder designs Block designs AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 539 DC 2-wire Inductive Sensors Cylinder design, M18×1 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Polarized, NO Ordering code Part number Polarized, NC Ordering code Part number Non-polarized, NO Ordering code Part number Non-polarized, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Minimum operating current Im Residual current Ir max. Permissible load capacitance max. Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface M18×1 Flush 5 mm 0...4 mm Ŷ BES03P2 BES 516-538-S4-H BES031P BES 516-539-S4-H 10...55 V DC 5V 250 V AC ([) 200 mA 5 mA 500 μA 1 μF Yes/Yes/Yes –25...+70 °C 250 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 10...36 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 600 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 BES02NR BES M18MF-USC70B-S04G BES02NN BES M18MF-UOC70B-S04G 10...36 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 600 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 Connection M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M18×1 Flush 7 mm 0...5.6 mm ŶŶ M18x1 M18x1 24 35 51 35 24 Additional cable lengths and PUR cable jacket material available on request. 540 51 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M18×1 Flush 7 mm 0...5.6 mm ŶŶ BES0328 BES M18MF-GSC70B-S04G BES02NL BES M18MF-GOC70B-S04G LED LED M12x1 M12x1 For more information, visit us online! DC 2-wire Inductive Sensors Cylinder design, M18×1 M18×1 Flush 7 mm 0...5.6 mm ŶŶ M18×1 Flush 7 mm 0...5.6 mm ŶŶ BES006C BES M18MG-GSC70B-BP00,3-GS04 BES039L BES M18MG-GOC70B-BP00,3-GS04 M18×1 Flush 7 mm 0...5.5 mm ŶŶ BES0329 BES M18MG-GSC70B-BP00,3-GS04-101 M18×1 Flush 7 mm 0...5.6 mm ŶŶ BES039P BES M18MG-GSH70B-BP00,3-GS04 M18×1 Flush 7 mm 0...5.6 mm ŶŶ BES00FA BES M18MG-GSC70B-BV02 BES02NT BES M18MG-GOC70B-BV02 BES039M BES M18MF-USH70B-S04K Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire Cylinder designs Block designs AC/DC 2-wire 10...55 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 600 Hz Yellow LED IP 67 CE Brass-coated PA 12 10...36 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 600 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin 0.3 m PUR cable with M12 connector, 4-pin M18x1 10...30 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 600 Hz Yellow LED IP 67 CE, cULus Brass-coated With ceramic coating 0.3 m PUR cable with M12 connector, 4-pin M18x1 M18x1 24 10...55 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 600 Hz Yellow LED IP 67 CE Brass-coated PA 12 10...36 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 600 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 0.3 m PUR cable with M12 connector, 4-pin 2 m PVC cable, 3×0.34 mm² AC 2-wire Special properties Analog distance measurement Accessories M18x1 24 24 24 LED LED 46 40 46 46 46 LED 360° M12x1 40 46 M12x1 40 46 50 35 M12x1 LED M12x1 ■ www.balluff.com 541 DC 2-wire Inductive Sensors Cylinder design, M18×1 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Polarized, NO Ordering code Part number Polarized, NC Ordering code Part number Non-polarized, NO Ordering code Part number Non-polarized, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Minimum operating current Im Residual current Ir max. Permissible load capacitance max. Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M18×1 Flush 7 mm 0...5.6 mm ŶŶ M18×1 Flush 7 mm 0...5.6 mm ŶŶ BES0073 BES M18MG-USC70B-BV02 BES02NU BES M18MG-UOC70B-BV02 10...36 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 600 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 2×0.34 mm² BES039N BES M18MG-USH70B-BV02 10...55 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 600 Hz Yellow LED IP 67 CE Brass-coated PA 12 2 m PVC cable, 2×0.34 mm² M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES0322 BES 516-547-S4-H 10...55 V DC 5V 250 V AC ([) 200 mA 5 mA 500 μA 1 μF Yes/Yes/Yes –25...+70 °C 200 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 542 For more information, visit us online! DC 2-wire Inductive Sensors Cylinder design, M30×1.5 M30×1.5 Flush 10 mm 0...8 mm Ŷ BES031T BES 516-541-S4-H 10...55 V DC 5V 250 V AC ([) 200 mA 5 mA 500 μA 1 μF Yes/Yes/Yes –25...+70 °C 150 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 M12 connector, 4-pin M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES027L BES M30MF-GSC15B-S04G BES027C BES M30MF-GOC15B-S04G M30×1.5 Flush 15 mm 0...12 mm ŶŶ M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES008W BES M30MF-GSC15B-S04K BES027J BES M30MF-GOC15B-S04K BES027E BES M30MF-USC15B-S04G BES027F BES M30MF-UOC15B-S04G 10...36 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 400 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin 10...36 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 400 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire BES03FP BES M30MF-USH15B-S04K DC 2-wire Cylinder designs Block designs AC/DC 2-wire 10...36 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 400 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 4-pin 10...55 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 400 Hz Yellow LED IP 67 CE Brass-coated PA 12 M12 connector, 4-pin AC 2-wire Special properties Analog distance measurement Accessories M30x1.5 M30x1.5 36 51 51 35 35 36 ■ www.balluff.com M30×1.5 Flush 15 mm 0...12 mm ŶŶ LED LED M12x1 M12x1 543 DC 2-wire Inductive Sensors Cylinder design, M30×1.5 M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES032A BES M30MF-GSC15B-BP00,3-GS04-101 10...55 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 400 Hz Yellow LED IP 67 CE Brass-coated PA 12 10...36 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 400 Hz Yellow LED IP 67 CE, cULus Brass-coated With ceramic coating 0.3 m PUR cable with M12 connector, 4-pin 0.3 m PUR cable with M12 connector, 4-pin M30x1.5 LED 36 M12x1 40 42.5 Additional cable lengths and PUR cable jacket material available on request. 544 M30x1.5 36 40 42.5 Connection BES0094 BES M30MF-USC15B-S04K BES027H BES M30MF-UOC15B-S04K 10...36 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 400 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES03H5 BES M30MF-GSH15B-BP00,3-GS04 LED M12x1 46 M30×1.5 Flush 15 mm 0...12 mm ŶŶ 46 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Polarized, NO Ordering code Part number Polarized, NC Ordering code Part number Non-polarized, NO Ordering code Part number Non-polarized, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Minimum operating current Im Residual current Ir max. Permissible load capacitance max. Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface For more information, visit us online! DC 2-wire Inductive Sensors Cylinder design, M30×1.5 M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES008Y BES M30MF-GSC15B-BP00,3-GS04 BES03H4 BES M30MF-GOC15B-BP00,3-GS04 M30×1.5 Flush 15 mm 0...12 mm ŶŶ BES008R BES M30MF-GSC15B-BV02 BES0279 BES M30MF-GOC15B-BV02 M30×1.5 Flush 15 mm 0...12 mm ŶŶ M30×1.5 Flush 15 mm 0...12 mm ŶŶ M30×1.5 Not flush 15 mm 0...12 mm Ŷ Global DC 3-wire DC 3-/4-wire 10...36 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 400 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 10...36 V DC 4V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 400 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 BES0091 BES M30MF-USC15B-BV02 BES027A BES M30MF-UOC15B-BV02 10...36 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 400 Hz Yellow LED IP 67 CE, cULus Brass-coated PA 12 0.3 m PUR cable with M12 connector, 4-pin 2 m PVC cable, 2×0.34 mm² 2 m PVC cable, 2×0.34 mm² 2 m PVC cable, 2×0.34 mm² M30x1.5 M30x1.5 M30x1.5 M30x1.5 Inductive sensors DC 2-wire Cylinder designs Block designs BES03FT BES M30MF-USH15B-BV02 10...55 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 400 Hz Yellow LED IP 67 CE Brass-coated PA 12 BES0323 BES 516-549-S4-H 10...55 V DC 5V 250 V AC ([) 200 mA 5 mA 500 μA 1 μF Yes/Yes/Yes –25...+70 °C 100 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Brass-coated PA 12 AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories M12 connector, 4-pin 36 LED 46 LED 40 42.5 40 40 LED 36 42.5 36 42.5 40 42.5 36 M12x1 LED M12x1 ■ www.balluff.com 545 DC 2-wire Inductive Sensors Block designs, 20×32×8 mm Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Non-polarized, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Minimum operating current Im Residual current Ir max. Permissible load capacitance max. Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 20×32×8 mm R01 Flush 5 mm 0...4 mm Ŷ BES032C BES R01ZC-USC50B-BP00.2-GS04 10...30 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 300 Hz Yellow LED IP 67 CE, cULus Cast zinc PA 12 0.2 m PUR cable with M12 connector, 4-pin 20×32×8 mm R01 Flush 5 mm 0...3.9 mm Ŷ BES03TM BES R01ZC-USC50B-BP00.2-GS04-101 10...30 V DC 5V 75 V DC 100 mA 5 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 300 Hz Yellow LED IP 67 CE Cast zinc With ceramic coating 0.2 m PUR cable with M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. 546 For more information, visit us online! DC 2-wire Inductive Sensors Block designs, 26×26×26 mm Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Polarized, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Minimum operating current Im Residual current Ir max. Permissible load capacitance max. Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 26×26×26 mm Z03 Flush 10 mm 0...8.1 mm Ŷ BES030H BES Z03K-GSS10B-S04U-006 10...36 V DC 4.6 V 250 V AC ([) 100 mA 2 mA 600 μA 0.1 μF Yes/Yes/Yes –25...+70 °C 250 Hz Yellow LED IP 67 CE PA PA M12 connector, 4-pin 26×26×26 mm Z03 Flush 10 mm 0...8.1 mm Ŷ BES030E BES Z03K-GSS10B-EP00,15-GS04-006 10...36 V DC 4.6 V 250 V AC ([) 100 mA 2 mA 600 μA 0.1 μF Yes/Yes/Yes –25...+70 °C 250 Hz Yellow LED IP 67 CE PA PA 0.15 m PUR cable with M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire Cylinder designs Block designs AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Sensing surface Sensing surface Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Small, compact block sensor with increased switching distance for quick installation The connector mount can be rotated and the sensing face can be oriented in three directions. Simple replacement with no loss of position thanks to the fixed mounting plate: ■ Cost savings ■ No special tools necessary ■ Easy to install ■ www.balluff.com Mounting plate included in the scope of delivery. 547 DC 2-wire Inductive Sensors Block designs, 40×66×40 mm Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Polarized, NO Ordering code Part number Polarized, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Minimum operating current Im Residual current Ir max. Permissible load capacitance max. Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 40×66×40 mm Unicompact Flush 15 mm 0...12 mm Ŷ BES0303 BES Q40KFU-GSH15B-S04G 10...55 V DC 4.6 V 250 V AC ([) 100 mA 2 mA 800 μA 1 μF Yes/Yes/Yes –25...+70 °C 150 Hz Yellow LED IP 67 CE PPE, PPS PPE M12 connector, 4-pin 40×66×40 mm Unicompact Flush 15 mm 0...12 mm Ŷ BES0302 BES Q40KFU-GSH15B-EP00,8-GS04 BES0301 BES Q40KFU-GOH15B-EP00,8-GS04 10...55 V DC 4.6 V 250 V AC ([) 100 mA 5 mA 800 μA 1 μF Yes/Yes/Yes –25...+70 °C 150 Hz Yellow LED IP 67 CE PPE, PPS PPE 0.8 m PUR cable with M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Unicompact The flexible sensor for mechanical engineering and equipment manufacturing. The detection direction can be adjusted in 5 directions. Long switching distance in compact package. Permissible installation variations for Unicompact 548 For more information, visit us online! DC 2-wire Inductive Sensors Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Polarized, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Minimum operating current Im Residual current Ir max. Permissible load capacitance max. Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 40×121×40 mm Unisensor Not flush 20 mm 0...16 mm Ŷ BES0309 BES Q40KU-GPH20F-KM21 10...55 V DC 4.6 V 250 V AC ([) 400 mA 4 mA 1 mA 1 μF Yes/Yes/Yes –25...+80 °C 300 Hz Red LED IP 65 CE PPE PPE Screw terminal Global DC 3-wire DC 3-/4-wire DC 2-wire Cylinder designs Block designs AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories 121 45.5 44.7 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 60.5 LED 10.4 30 40 16 40 Mounting options Inductive sensors 5.3 Note permissible installation variants. Block designs, 40×121×40 mm M20x1.5 Row mounting ■ www.balluff.com 549 DC 2-wire Inductive Sensors Block designs, 80×92×40 mm Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Polarized, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Minimum operating current Im Residual current Ir max. Permissible load capacitance max. Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 80×92×40 mm Maxisensor Flush 50 mm 0...40 mm Ŷ BES030A BES Q80KA-GSH50B-S04Q 10...55 V DC 4.6 V 250 V AC ([) 400 mA 4 mA 600 μA 1 μF Yes/Yes/Yes –25...+70 °C 90 Hz Yellow LED IP 67 CE PPE PPE M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Maxisensor Long switching distance with low installation height in the detection direction. Ideal for equipment manufacturing and conveyor technology. Permissible Maxisensor installation options Installation in steel or non-ferrous metals Installation on steel or non-ferrous metals The switching distance is reduced by max. 5.5 mm when not installed flush. 550 For more information, visit us online! DC 2-wire Inductive Sensors Block designs, 80×92×40 mm Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire Cylinder designs Block designs AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories ■ www.balluff.com 551 Inductive Sensors AC/DC 2-wire inductive sensors Our standard product line in 2-wire using AC/DC technology: Balluff offers something for practically any application in automation with this comprehensive product line of sensors from M12 to 80×80 mm. These high-quality sensors are designed and manufactured according to worldwide standards and the latest technology. We inspect absolutely every one of our products, providing you the peace of mind that you are receiving only carefully checked sensors. 552 For more information, visit us online! AC/DC 2-wire Inductive Sensors Contents Cylinder designs M12×1 M18×1 M30×1.5 554 556 559 Block designs 26×40×12 mm (R05) 40×73×40 mm (Unicompact) 40×120×40 mm (Unisensor) 80×80×40 mm (Maxisensor) 563 564 566 570 Basic information and definitions can be found on page 884. ■ www.balluff.com 553 AC/DC 2-wire Inductive Sensors Current reduction as a function of ambient temperature range 130 mA M12 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO Ordering code Part number NC Ordering code Part number Rated operating voltage Ue Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Minimum operating current Im Residual current Ir max. Short-term current carrying capacity Ic /time T Short-circuit protected Ambient temperature Ta Switching frequency f max. Utilization category Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 100 mA –25 °C +25 °C +70 °C Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Cable versions (Insulation class 2) on request. 250 mA M18 150 mA –25 °C +25 °C 250 mA +70 °C M30 180 mA –25 °C 554 +25 °C +70 °C For more information, visit us online! AC/DC 2-wire Inductive Sensors Cylinder design, M12×1 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES027W BES 516-207-S27-E BES0283 BES 516-208-S27-E 110 V AC 20...250 V AC/DC 11 V 250 V AC 130 mA 5 mA 1.7 mA 0.7 A/20 ms Yes –25...+70 °C 1 kHz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 M12 connector,3-pin M12×1 Flush 2 mm 0...1.6 mm Ŷ BES02E3 BES 515-207-S21-E 110 V AC 20...250 V AC/DC 11 V 250 V AC 130 mA 5 mA 1.7 mA 0.7 A/20 ms Yes –25...+70 °C 1 kHz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 1/2" 20UNF-2A plug connector, 3-pin M12×1 Flush 2 mm 0...1.6 mm Ŷ BES027Y BES 516-207-S5-E BES0284 BES 516-208-S5-E 110 V AC 20...250 V AC/DC 11 V 250 V AC 130 mA 5 mA 1.7 mA 0.7 A/20 ms Yes –25...+70 °C 1 kHz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 7/8" 16UN plug connector, 3-pin M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES028C BES 516-209-S27-E BES028K BES 516-210-S27-E 110 V AC 20...250 V AC/DC 11 V 250 V AC 130 mA 5 mA 1.7 mA 0.7 A/20 ms Yes –25...+70 °C 600 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 M12 connector, 3-pin M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES02E4 BES 515-209-S21-E 110 V AC 20...250 V AC/DC 11 V 250 V AC 130 mA 5 mA 1.7 mA 0.7 A/20 ms Yes –25...+70 °C 600 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 1/2“-20UNF-2A plug connector, 3-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire Cylinder designs Block designs AC 2-wire Special properties Analog distance measurement Accessories 85 17 50 M12x1 7/8" - 16UN ■ www.balluff.com 555 AC/DC 2-wire Inductive Sensors Cylinder design, M12×1, M18×1 M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES028E BES 516-209-S5-E M12×1 Not flush 8 mm 0...6.4 mm ŶŶ BES0289 BES 516-209-G-S21-E 110 V AC 20...250 V AC/DC 11 V 250 V AC 130 mA 5 mA 1.7 mA 0.7 A/20 ms Yes –25...+70 °C 600 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 7/8" 16UN plug connector, 3-pin 110 V AC 20...250 V AC/DC 11 V 250 V AC 130 mA 5 mA 1.7 mA 0.7 A/20 ms Yes –25...+70 °C 600 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 1/2“-20UNF-2A plug connector, 3-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M18×1 Flush 5 mm 0...4 mm Ŷ BES028R BES 516-211-E5-E-S27 BES0290 BES 516-212-E5-E-S27 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 1.5 A/20 ms Yes –25...+70 °C 400 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 3-pin M12x1 M12x1 5 5 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO Ordering code Part number NC Ordering code Part number Rated operating voltage Ue Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Minimum operating current Im Residual current Ir max. Short-term current carrying capacity Ic /time T Short-circuit protected Ambient temperature Ta Switching frequency f max. Utilization category Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 50 17 85 70 17 40.5 Cable versions (protection class 2) on request. 1/2 - 20 UNF - 2A 7/8"-16UN 556 For more information, visit us online! AC/DC 2-wire Inductive Sensors Cylinder design, M18×1 M18×1 Flush 5 mm 0...4 mm Ŷ BES02E6 BES 515-211-E5-E-S27 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 1.5 A/20 ms Yes –25...+70 °C 400 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 M12 connector, 3-pin M18×1 Flush 5 mm 0...4 mm Ŷ BES028P BES 516-211-E5-E-S21 BES028Z BES 516-212-E5-E-S21 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 1.5 A/20 ms Yes –25...+70 °C 400 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 1/2“-20UNF-2A plug connector, 3-pin M18×1 Flush 5 mm 0...4 mm Ŷ BES02E5 BES 515-211-E5-E-S21 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 1.5 A/20 ms Yes –25...+70 °C 400 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 1/2“-20UNF-2A plug connector, 3-pin M18×1 Flush 5 mm 0...4 mm Ŷ BES028T BES 516-211-E5-E-S5 BES0291 BES 516-212-E5-E-S5 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 1.5 A/20 ms Yes –25...+70 °C 400 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 7/8" 16UN plug connector, 3-pin M18×1 Flush 8 mm 0...6.4 mm ŶŶ BES02ZE BES M18MN-USU80B-S21G 110 V AC 20...300 V AC/DC 8V 250 V AC 200 mA 4 mA 0.8 mA 1.5 A/20 ms Yes –25...+70 °C 30 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PBT 1/2“-20UNF-2A plug connector, 3-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire Cylinder designs Block designs AC 2-wire Special properties Analog distance measurement Accessories 80 24 50.5 M18x1 19 7/8" - 16UN ■ www.balluff.com 557 AC/DC 2-wire Inductive Sensors Cylinder design, M18×1 M18×1 Not flush 8 mm 0...6.4 mm Ŷ BES0297 BES 516-213-E5-E-S27 BES029J BES 516-214-E5-E-S27 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 1.5 A/20 ms Yes –25...+70 °C 250 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 3-pin 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 1.5 A/20 ms Yes –25...+70 °C 250 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 M12 connector, 3-pin 24 24 M12x1 558 10 70.5 70.5 70.5 50.5 Cable versions (protection class 2) on request. M18x1 10 M18x1 10 M18x1 M18×1 Not flush 8 mm 0...6.4 mm Ŷ BES0296 BES 516-213-E5-E-S21 BES029H BES 516-214-E5-E-S21 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 1.5 A/20 ms Yes –25...+70 °C 250 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 1/2“-20UNF-2A plug connector, 3-pin 50.5 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M18×1 Not flush 8 mm 0...6.4 mm Ŷ BES02E8 BES 515-213-E5-E-S27 50.5 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO Ordering code Part number NC Ordering code Part number Rated operating voltage Ue Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Minimum operating current Im Residual current Ir max. Short-term current carrying capacity Ic /time T Short-circuit protected Ambient temperature Ta Switching frequency f max. Utilization category Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 24 M12x1 1/2"-20UNF-2A For more information, visit us online! AC/DC 2-wire Inductive Sensors Cylinder designs, M18×1, M30×1.5 M18×1 Not flush 8 mm 0...6.4 mm Ŷ BES02E7 BES 515-213-E5-E-S21 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 1.5 A/20 ms Yes –25...+70 °C 250 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 1/2“-20UNF-2A plug connector, 3-pin M18×1 Not flush 8 mm 0...6.4 mm Ŷ BES0298 BES 516-213-E5-E-S5 M18×1 Not flush 16 mm 0...13 mm ŶŶ BES029A BES 516-213-G-E5-E-S21 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 1.5 A/20 ms Yes –25...+70 °C 250 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 7/8" 16UN plug connector, 3-pin 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 3 A/20 ms Yes –25...+70 °C 150 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 M12 connector, 3-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire Cylinder designs Block designs AC 2-wire Special properties Analog distance measurement Accessories 10 10 70.5 50.5 80 70.5 M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES02EA BES 515-215-E5-E-S27 M18x1 50.5 10 50.5 24 BES02A3 BES 516-216-E5-E-S27 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 3 A/20 ms Yes –25...+70 °C 150 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 3-pin 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 1.5 A/1 ms Yes –25...+70 °C 250 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 1/2“-20UNF-2A plug connector, 3-pin M18x1 M18x1 M30×1.5 Flush 10 mm 0...8.1 mm Ŷ 24 24 1/2"-20UNF-2A 1/2"-20UNF-2A 19 7/8"-16UN ■ www.balluff.com 559 AC/DC 2-wire Inductive Sensors Cylinder design, M30×1.5 Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO Ordering code Part number NC Ordering code Part number Rated operating voltage Ue Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Minimum operating current Im Residual current Ir max. Short-term current carrying capacity Ic /time T Short-circuit protected Ambient temperature Ta Switching frequency f max. Utilization category Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES029T BES 516-215-E5-E-S21 BES02A2 BES 516-216-E5-E-S21 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 3 A/20 ms Yes –25...+70 °C 150 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 1/2“-20UNF-2A plug connector, 3-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES02E9 BES 515-215-E5-E-S21 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 3 A/20 ms Yes –25...+70 °C 150 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Stainless steel PA 12 1/2“-20UNF-2A plug connector, 3-pin M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES029W BES 516-215-E5-E-S5 BES02A4 BES 516-216-E5-E-S5 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 3 A/20 ms Yes –25...+70 °C 150 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 7/8" 16UN plug connector, 3-pin M30x1.5 M30x1.5 M30x1.5 50.5 36 1/2"-20UNF-2A 1/2"-20UNF-2A 560 80 50.5 36 70.5 36 70.5 50.5 Cable versions (protection class 2) on request. 19 7/8"-16UN For more information, visit us online! AC/DC 2-wire Inductive Sensors Cylinder design, M30×1.5 M30×1.5 Not flush 15 mm 0...12.1 mm Ŷ BES02AC BES 516-217-E5-E-S27 BES02AL BES 516-218-E5-E-S27 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 3 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 3-pin M30×1.5 Not flush 15 mm 0...12.1 mm Ŷ BES02AA BES 516-217-E5-E-S21 BES02AK BES 516-218-E5-E-S21 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 3 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 1/2“-20UNF-2A plug connector, 3-pin M30×1.5 Not flush 15 mm 0...12.1 mm Ŷ BES02AE BES 516-217-E5-E-S5 BES02AM BES 516-218-E5-E-S5 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 3 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus Brass-coated PA 12 7/8" 16UN plug connector, 3-pin Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire Cylinder designs Block designs AC 2-wire Special properties Analog distance measurement Accessories M30x1.5 50.5 80 70.5 50.5 13 13 M30x1.5 36 Inductive sensors 36 1/2"- 20UNF- 2A 19 7/8"-16UN ■ www.balluff.com 561 AC/DC 2-wire Inductive Sensors Sensors in use Position detection with inductive sensors BES – for the most possible safety: In foundry work, exact position detection is absolutely essential for pouring metal with exact precision. Balluff inductive sensors can be integrated into the existing feed system and detect the stationary ladle position right before pouring. Assembly procedures require precise knowledge about the position of materials. Balluff inductive sensors BES also identify metals over long distances and in harsh environments. 562 For more information, visit us online! AC/DC 2-wire Inductive Sensors Block designs, 26×40×12 mm Series Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO Ordering code Part number Rated operating voltage Ue Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Minimum operating current Im Residual current Ir max. Short-term current carrying capacity Ic /time T Short-circuit protected Ambient temperature Ta Switching frequency f max. Utilization category Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 26×40×12 mm R05 Flush 2 mm 0...1.6 mm Ŷ BES02CT BES R05KB-USU20B-EV02 110 V AC 20...250 V AC/DC 12 V 250 V AC ([) 130 mA 5 mA 1.7 mA 0.7 A/20 ms Yes –25...+70 °C 400 Hz AC 140/DC 13 Yellow LED IP 67 CE PA 12 PA 12 2 m PVC cable, 2×0.34 mm² Sensing surface 26×40×12 mm R05 Flush 4 mm 0...3.2 mm ŶŶ BES02CY BES R05KB-USU40B-EV02 110 V AC 20...250 V AC/DC 12 V 250 V AC ([) 130 mA 5 mA 1.7 mA 0.7 A/20 ms Yes –25...+70 °C 400 Hz AC 140/DC 13 Yellow LED IP 67 CE PA 12 PA 12 2 m PVC cable, 2×0.34 mm² Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire Cylinder designs Block designs AC 2-wire Special properties Analog distance measurement Accessories Sensing surface Additional cable lengths and PUR cable jacket material available on request. Row mounting ■ With plastics or no material present in the space: Distance A = at least 5 mm ■ With metal in the space: Distance A = at least 4 mm ■ www.balluff.com 563 AC/DC 2-wire Inductive Sensors Note permissible installation variants. Block designs, 40×73×40 mm Current reduction as a function of ambient temperature range Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO Ordering code Part number NC Ordering code Part number Rated operating voltage Ue Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Minimum operating current Im Residual current Ir max. Short-term current carrying capacity Ic /time T Short-circuit protected Ambient temperature Ta Switching frequency f max. Utilization category Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Possible installation variations Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 250 mA 180 mA –25 °C +25 °C Row mounting Flush 80 mm, not flush 120 mm +70 °C Mounting options 40 40 40 Fig. 1 564 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 For more information, visit us online! AC/DC 2-wire Inductive Sensors Block designs, 40×73×40 mm 40×73×40 mm Unicompact Flush 15 mm 0...12 mm Ŷ BES022E BES Q40KEU-USU15B-S27G BES0212 BES Q40KEU-UOU15B-S27G 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 2 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE PBT/Cast zinc PBT Image 1...6 M12 connector, 3-pin 40×73×40 mm Unicompact Flush 15 mm 0...12 mm Ŷ BES022A BES Q40KEU-USU15B-S21G BES0211 BES Q40KEU-UOU15B-S21G 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 2 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE PBT/Cast zinc PBT Image 1...6 1/2" 20UNF-2A plug connector, 3-pin 1/2"-20 UNF-2A ■ www.balluff.com 40×73×40 mm Unicompact Not flush 25 mm 0...20.2 mm Ŷ BES022H BES Q40KEU-USU25F-S27G 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 2 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE PBT/Cast zinc PBT Image 3...6 M12 connector, 3-pin 40×73×40 mm Unicompact Not flush 25 mm 0...20.2 mm Ŷ BES022F BES Q40KEU-USU25F-S21G BES0213 BES Q40KEU-UOU25F-S21G 110 V AC 20...250 V AC/DC 11 V 250 V AC 250 mA 5 mA 1.7 mA 2 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE PBT/Cast zinc PBT Image 3...6 1/2" 20UNF-2A plug connector, 3-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire Cylinder designs Block designs AC 2-wire Special properties Analog distance measurement Accessories 1/2"-20 UNF-2A 565 AC/DC 2-wire Inductive Sensors Block designs, 40×120×40 mm Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO/NC Ordering code Part number programmable Rated operating voltage Ue Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Minimum operating current Im Residual current Ir max. Short-term current carrying capacity Ic /time T Short-circuit protected Ambient temperature Ta Switching frequency f max. Utilization category Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Possible installation variations Connection UNISENSOR Note permissible installation variants. sn 15/20 mm sn 30/40 mm Programmable Unisensor Unisensors can be switched between a normally open functionand a normally closed function. A wire jumper is used to change the setting. Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Current reduction as a function of ambient temperature range 250 mA 180 mA –25 °C Row mounting Flush 80 mm, Not flush 120 mm +25 °C +70 °C Mounting options Fig. 1 566 Fig. 2 Fig. 3 Fig. 4 Fig. 5 For more information, visit us online! AC/DC 2-wire Inductive Sensors Block designs, 40×120×40 mm LED 60 DC 3-/4-wire DC 2-wire AC/DC 2-wire Cylinder designs Block designs AC 2-wire Special properties Analog distance measurement Accessories 7.3 6.5 7.3 6.5 60 7.3 6.5 60 Global DC 3-wire Ø5.3 5.3 LED 120 7.3 120 5.3 LED Inductive sensors 7.3 46 46 40 46 7.3 120 40×120×40 mm Unisensor Flush 15 mm 0...12 mm Ŷ BES0243 BES 517-223-U3-E-S5 110 V AC 20...250 V AC/DC 10.5 V 250 V AC 250 mA 5 mA 1.7 mA 1 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus PBT/aluminum PBT Image 1...5 7/8" 16UN plug connector, 3-pin 40 40×120×40 mm Unisensor Flush 15 mm 0...12 mm Ŷ BES0242 BES 517-223-U3-E-S21 110 V AC 20...250 V AC/DC 10.5 V 250 V AC 250 mA 5 mA 1.7 mA 1 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus PBT/aluminum PBT Image 1...5 1/2" 20UNF-2A plug connector, 3-pin 40 40×120×40 mm Unisensor Flush 15 mm 0...12 mm Ŷ BES020Y BES 517-223-M3-E 110 V AC 20...250 V AC/DC 10.5 V 250 V AC ([) 250 mA 5 mA 1.7 mA 1 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus PBT/aluminum PBT Image 1...5 Screw terminal 30 40 7/8“-16UN 1/2" 20UNF-2A 30 25.4 M20×1.5 ■ www.balluff.com 40 13 16 13 16 13 16 40 40 40 30 40 567 AC/DC 2-wire Inductive Sensors Block designs, 40×120×40 mm Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO/NC Ordering code Part number programmable Rated operating voltage Ue Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Minimum operating current Im Residual current Ir max. Short-term current carrying capacity Ic /time T Short-circuit protected Ambient temperature Ta Switching frequency f max. Utilization category Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Possible installation variations Connection 40×120×40 mm Unisensor Not flush 20 mm 0...16 mm Ŷ BES0245 BES 517-223-U4-E-S21 110 V AC 20...250 V AC/DC 10.5 V 250 V AC 250 mA 5 mA 1.7 mA 1 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus PBT/aluminum PBT Fig. 4 and 5 1/2" 20UNF-2A plug connector, 3-pin 40×120×40 mm Unisensor Not flush 20 mm 0...16 mm Ŷ BES0246 BES 517-223-U4-E-S5 110 V AC 20...250 V AC/DC 10.5 V 250 V AC 250 mA 5 mA 1.7 mA 1 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus PBT/aluminum PBT Fig. 4 and 5 7/8" 16UN plug connector, 3-pin 40 Ø5.3 LED 7.3 6.5 7.3 6.5 60 60 LED 120 120 5.3 7.3 7.3 46 46 40 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 7/8“-16UN 1/2" 20UNF-2A 30 25.4 40 568 13 16 13 16 40 40 30 40 For more information, visit us online! AC/DC 2-wire Inductive Sensors Block designs, 40×120×40 mm AC/DC 2-wire Cylinder designs Block designs AC 2-wire Special properties Analog distance measurement Accessories 5.3 6.5 7.3 60 25.4 40 13 13 16 40 40 30 16 13 16 DC 2-wire 7.3 120 Ø5.3 7.3 6.5 7.3 6.5 60 40 DC 3-/4-wire 1/2" 20UNF-2A 30 30 ■ www.balluff.com Global DC 3-wire LED 7/8“-16UN 1/2" 20UNF-2A 25.4 40 Inductive sensors 46 40 46 7.3 LED 60 LED 120 5.3 7.3 120 40×120×40 mm Unisensor Not flush 40 mm 0...32 mm Ŷ BES024C BES 517-223-U7-EL-S21 110 V AC 20...250 V 12.5 V 250 V AC 250 mA 5 mA 1.7 mA 1 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus PBT/aluminum PBT Fig. 4 and 5 1/2" 20UNF-2A plug connector, 3-pin 40 40×120×40 mm Unisensor Not flush 30 mm 0...24 mm Ŷ BES0249 BES 517-223-U5-E-S5 110 V AC 20...250 V AC/DC 10.5 V 250 V AC 250 mA 5 mA 1.7 mA 1 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus PBT/aluminum PBT Fig. 4 and 5 7/8" 16UN plug connector, 3-pin 46 40 40×120×40 mm Unisensor Not flush 30 mm 0...24 mm Ŷ BES0248 BES 517-223-U5-E-S21 110 V AC 20...250 V AC/DC 10.5 V 250 V AC 250 mA 5 mA 1.7 mA 1 A/20 ms Yes –25...+70 °C 100 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus PBT/aluminum PBT Fig. 4 and 5 1/2" 20UNF-2A plug connector, 3-pin 40 569 AC/DC 2-wire Inductive Sensors Block designs, 80×80×40 mm Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO/NC Ordering code Part number programmable Rated operating voltage Ue Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Minimum operating current Im Residual current Ir max. Short-term current carrying capacity Ic /time T Short-circuit protected Ambient temperature Ta Switching frequency f max. Utilization category Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Precise pallet positioning using inductive sensors BES with long switching distance Take advantage of the ability to position with precision and ensure a consistent production process. Rugged Maxisensors can be sunk into a plant floor to provide stopping points for vehicle assembly pallets. Maxisensor can be programmed Maxisensors can be set to have a normally open or normally closed function using a switch. 570 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Mounting in non-ferrous metals Mounting in steel/non-ferrous metals Fig. 1 Fig. 2 For more information, visit us online! AC/DC 2-wire Inductive Sensors Block designs, 80×80×40 mm 80×80×40 mm Maxisensor Not flush 50 mm 0...40.5 mm Ŷ BES024F BES 517-224-M5-E 110 V AC 20...250 V AC/DC 11 V 250 V AC ([) 250 mA 5 mA ≤ 1.7 mA 1 A/20 ms Yes –25...+70 °C 10 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus PBT PBT Screw terminals 80×80×40 mm Maxisensor Not flush 50 mm 0...40.5 mm Ŷ BES023C BES 517-224-M5-E-S21 110 V AC 20...250 V AC/DC 11 V 250 V AC ([) 250 mA 5 mA 1700 μA 1 A/20 ms Yes –25...+70 °C 10 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus PBT PBT 1/2" 20UNF-2A plug connector, 3-pin 1/2"-20UNF-2A ■ www.balluff.com 80×80×40 mm Maxisensor Not flush 50 mm 0...40.5 mm Ŷ BES01ZJ BES 517-224-U5-E-S5 110 V AC 20...250 V AC/DC 11 V 250 V AC ([) 250 mA 5 mA 1700 μA 1 A/20 ms Yes –25...+70 °C 10 Hz AC 140/DC 13 Yellow LED IP 67 CE, cULus PBT PBT 7/8" 16UN plug connector, 3-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire Cylinder designs Block designs AC 2-wire Special properties Analog distance measurement Accessories 7/8“-16UN 571 Inductive Sensors AC 2-wire inductive sensors Our standard line in 2-wire AC technology: Balluff offers AC-sensors in the M12, M18, and M30 design and as Maxisensor series. 572 For more information, visit us online! AC 2-wire Inductive Standard Sensors Contents Cylinder designs M12×1 M18×1 M30×1.5 574 576 577 Block designs 80×80×40 mm (Maxisensor) 579 Basic information and definitions can be found on page 884. ■ www.balluff.com 573 AC 2-wire Inductive Standard Sensors Cylinder design, M12×1 AC-sensors are optimized for evaluation units and controllers with alternating current input. These sensors are mainly used in Asia and America. When maintaining the rated operating current, the sensors can directly control fuses and relays. Recommendation Short-circuit-protection equipment: Miniature fuse in accordance with IEC 60127-2 Sheet 1, ≤ 2 A (fastacting). See attachment-Circuit diagrams. After a short-circuit, check the device for proper function. Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured operating distance sa Switching distance marking NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal/short-circuit protected Ambient temperature range Ta Switching frequency f max. Utilization category Function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M12×1 Flush 2 mm 0...1.6 mm Ŷ BES02CA BES 516-449-S21-L 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 1/2" 20UNF-2A plug connector, 3-pin Connection-switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M12x1 70 17 40.5 Additional cable lengths on request. 1/2"-20 UNF- 2A 574 For more information, visit us online! AC 2-wire Inductive Standard Sensors Cylinder designs, M12×1 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES02FP BES 515-449-SA7-S21 35...250 V AC 8.5 V 250 V AC 150 mA Yes/No –25...+70 °C 10 Hz AC 140 Yellow LED IP 67 CE, cULus Stainless steel PA 12 1/2" 20UNF-2A plug connector, 3-pin M12×1 Flush 2 mm 0...1.6 mm Ŷ BES0318 BES 516-449-S27-L 20...250 V AC 4V 250 V AC 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 3-pin M12×1 Flush 2 mm 0...1.6 mm Ŷ BES02C8 BES 516-449-BO-L-02 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 2×0.34 mm² M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES02CF BES 516-461-S21-L 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 1/2" 20UNF-2A plug connector, 3-pin M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES02CC BES 516-461-BO-L-02 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 2×0.34 mm² Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Cylinder designs Block designs Special properties Analog distance measurement Accessories M12x1 50.5 1/2 - 20 UNF - 2A ■ www.balluff.com 70 17 70 17 40.5 5 M12x1 1/2 - 20 UNF - 2A 575 AC 2-wire Inductive Standard Sensors Cylinder designs, M18×1 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO Ordering code Part number Rated operating voltage Ue Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal/short-circuit protected Ambient temperature range Ta Switching frequency f max. Utilization category Function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M18×1 Flush 5 mm 0...4 mm Ŷ BES02AY BES 516-420-E5-L-S21 110 V 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 1/2" 20UNF-2A plug connector, 3-pin Connection-switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M18×1 Flush 5 mm 0...4 mm Ŷ BES0317 BES 516-420-E5-L-S27 110 V 20...250 V AC 4V 250 V AC 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 3-pin M18×1 Flush 5 mm 0...4 mm Ŷ BES02AU BES 516-420-E4-L-02 110 V 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 2×0.34 mm² M18x1 51 65 24 56 49 Additional cable lengths on request. 1/2"-20 UNF-2A 576 For more information, visit us online! AC 2-wire Inductive Standard Sensors Cylinder designs, M18×1, M30×1.5 M18×1 Not flush 8 mm 0...6.4 mm Ŷ BES02C7 BES 516-437-E5-L-S21 110 V 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 1/2" 20UNF-2A plug connector, 3-pin M18×1 Not flush 8 mm 0...6.4 mm Ŷ BES02C5 BES 516-437-E4-L-02 110 V 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 2×0.34 mm² M30×1.5 Flush 10 mm 0...8 mm Ŷ BES02AT BES 516-418-E5-L-S21 110 V 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 1/2" 20UNF-2A plug connector, 3-pin M30×1.5 Flush 10 mm 0...8 mm Ŷ BES0316 BES 516-418-E5-L-S27 110 V 20...250 V AC 4V 250 V AC 500 mA Yes/No –25...+70 °C 25 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 M12 connector, 3-pin M30×1.5 Flush 10 mm 0...10 mm Ŷ BES02AP BES 516-418-E4-L-02 110 V 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 10 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 2×0.34 mm² Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Cylinder designs Block designs Special properties Analog distance measurement Accessories M18x1 24 61.5 55.5 56 24 65 49 10 10 M18x1 1/2-20 UNF-2A LED 1/2"-20 UNF-2A ■ www.balluff.com 577 AC 2-wire Inductive Standard Sensors Cylinder designs, M30×1.5 M30×1.5 Not flush 15 mm 0...12 mm Ŷ BES02C3 BES 516-432-E5-L-S21 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 10 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 1/2" 20UNF-2A plug connector, 3-pin M30x1.5 13 13.5 M30x1.5 36 36 70.5 50.5 Additional cable lengths on request. 56 Connection-switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M30×1.5 Not flush 15 mm 0...12 mm Ŷ BES02C1 BES 516-432-E4-L-02 20...250 V AC 4V 250 V AC ([) 500 mA Yes/No –25...+70 °C 10 Hz AC 140 Yellow LED IP 67 CE, cULus Brass-coated PA 12 2 m PVC cable, 2×0.34 mm² 50 Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal/short-circuit protected Ambient temperature range Ta Switching frequency f max. Utilization category Function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection LED 1/2"- 20UNF- 2A 578 For more information, visit us online! AC 2-wire Inductive Standard Sensors Block designs, 80×80×40 mm Series Installation type (observe instructions in Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking NO/NC; Ordering code Part number programmable Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal/short-circuit protected Ambient temperature range Ta Switching frequency f max. Utilization category Function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 80×80×40 mm Maxisensor Not flush 50 mm 0...40 mm Ŷ BES022T BES 517-460-U5-L-D-S21 20...250 V AC 7V 250 V AC ([) 500 mA Yes/No –25...+70 °C 10 Hz AC 140 Yellow LED IP 67 CE, cULus PBT PBT 1/2" 20UNF-2A plug connector, 3-pin 80×80×40 mm Maxisensor Not flush 50 mm 0...40 mm Ŷ BES022U BES 517-460-U5-L-D-S5 20...250 V AC 7V 250 V AC ([) 500 mA Yes/No –25...+70 °C 10 Hz AC 140 Yellow LED IP 67 CE, cULus PBT PBT 7/8" 16UN plug connector, 3-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Cylinder designs Block designs Special properties Analog distance measurement Accessories Connection-switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 1/2"-20UNF-2A Maxisensor can be programmed Maxisensors can be set to have a normally open- or normally closed function using a switch. ■ www.balluff.com Mounting in non-ferrous metals Mounting in steel/non-ferrous metals Fig. 1 Fig. 2 7/8“-16UN 579 Inductive Sensors Inductive sensors with special properties Securely and reliably, our inductive sensors provide solutions for special situations: With increased requirements such as high pressure or Factor 1, under rough conditions, in aggressive media and in the Ex area. The product line also includes special versions such as hose or ring sensors for discharge and infeed and counting small parts and large designs with large switching distance. 580 For more information, visit us online! Inductive Sensors with Special Properties Contents Inductive sensors with special properties High pressure rated sensors EX sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostic sensors Large designs Ring sensors Hose sensors 583 600 606 612 616 626 638 646 652 654 656 Basic information and definitions can be found on page 884. ■ www.balluff.com 581 58 Inductive Sensors with Special Properties High pressure rated sensors In the wide range of hydraulic applications, high pressure proximity switches are exposed to many aggressive media and hostile environments. Numerous applications in hydraulic cylinders and valves have resulted in this model-rich sensor line. What are your requirements? Medium-resistant housing materials and a special sealing process result in pressure ratings from 3 to 500 bar, depending on the sensor type. Different housing diameters and thread lengths can be developed according to the specific requirements of the application. The output amplifier is installed so that no additional devices are necessary and a relay can be controlled directly. Pressure-tight proximity switches are available with molded-in cable or with plug-in connectors. up to 10, 20 and 50 bar Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Pressure range PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Sealing ring material/size/replacement part number Supporting ring material/size/replacement part number Connection Connection-Switching diagram, see page 906 Additional cable lengths on request. Installation instruction for high pressure rated sensors with O-ring Assembly direction Thread undercut D DIN 76 0.6×O-Ring-Cord diameter For example, for BES 516-300-S270-S4-D: d1: Ø of the positioning hole for the switch head Ø 10H8 = Ø 10+0.022 d2: Nominal thread diameter M12×1 6H L: Recommended screw-in depth L ≥ 0.8×d2 = 0.8×12 = 9.6 582 For more information, visit us online! Inductive Sensors with Special Properties High pressure rated sensors M5×0.5, M12×1 M5×0.5 Flush 0.8 mm 0...0.65 mm M5×0.5 Flush 0.8 mm 0...0.65 mm M5×0.5 Flush 0.8 mm 0...0.65 mm M5×0.5 Flush 0.8 mm 0...0.65 mm Oil pressure resistant up to 10 bar Oil pressure resistant up to 20 bar Oil pressure resistant up to 20 bar Oil pressure resistant up to 20 bar Oil pressure resistant up to 50 bar BES03H6 BES M05EG-PSC08B-BP02 BES03JN BES M05EC-PSC08B-S26G-R01 BES03JP BES M05EC-POC08B-S26G-R01 BES03JP BES M05EC-NSC08B-S26G-R01 BES03JT BES M05EC-NOC08B-S26G-R01 10…30 V DC 3V 75 V DC 100 mA Open collector Yes/Yes/Yes –25…+70 °C 3 kHz Yellow LED IP 67 CE Stainless steel PBT PA/10.4×3.5/178173 BES03LT BES M05EC-PSC08B-S49G-R01 BES03LU BES M05EC-POC08B-S49G-R01 BES03LW BES M05EC-NSC08B-S49G-R01 BES03LY BES M05EC-NOC08B-S49G-R01 10…30 V DC 3V 75 V DC 100 mA Open collector Yes/Yes/Yes –25…+70 °C 3 kHz Yellow LED IP 67 CE Stainless steel PBT PA/10.4×3.5/178173 BES03K8 BES M05ED-PSC08B-BP00,3-GS49-R01 BES03K9 BES M05ED-POC08B-BP00,3-GS49-R01 BES03KA BES M05ED-NSC08B-BP00,3-GS49-R01 BES03KC BES M05ED-NOC08B-BP00,3-GS49-R01 10…30 V DC 3V 75 V DC 100 mA Open collector Yes/Yes/Yes –25…+70 °C 3 kHz Yellow LED IP 67 CE Stainless steel PBT PA/10.4×3.5/178173 BHS003A BES 516-300-S291-S4-D M5 connector, 4-pin M8 connector, 3-pin 0.3 m PUR cable with M8 connector, 3-pin 10…30 V DC 3V 75 V DC 100 mA Open collector Yes/Yes/Yes –25…+70 °C 3 kHz Yellow LED IP 67 CE Stainless steel Ceramic 2 m PUR cable, 3×0.14 mm² M5×0.5 M5x0.5 M12×1 Flush 1.5 mm 0...1.2 mm M5x0.5 Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz no IP 68 per BWN Pr. 20 CE Stainless steel EP N70B200V/5.3×2.4 NBR/631753 PTFE/5.3×2.4/705918 M12 connector, 3-pin Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement M5x05 LED 4 4 27 15.4 20 41 29 7 LED 7 12 42 15.4 Accessories LED 7 4 LED M8x1 M8x1 ■ www.balluff.com 583 Inductive Sensors with Special Properties High pressure rated sensors up to 100 bar Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Pressure range PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number NPN, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Sealing ring material/size/replacement part number Supporting ring material/size/replacement part number Connection Connection-Switching diagram, see page 906 Additional cable lengths on request. 584 For more information, visit us online! Inductive Sensors with Special Properties High pressure rated sensors M5×0.5, M12×1 M5×0.5 Flush 0.8 mm 0...0.65 mm Oil pressure resistant up to 100 bar BES03LC BES M05ED-PSD08B-BP00,3-GS49-R03 BES03LE BES M05ED-POD08B-BP00,3-GS49-R03 BES03LF BES M05ED-NSD08B-BP00,3-GS49-R03 BES03LH BES M05ED-NOD08B-BP00,3-GS49-R03 10…30 V DC 3V 75 V DC 100 mA Open collector Yes/Yes/Yes –25…+70 °C 3 kHz IP 67 CE, cULus Stainless steel Ceramic N70B200V/5.3×2.4/178173 M5×0.5 Flush 0.8 mm 0...0.65 mm Oil pressure resistant up to 100 bar BES03L7 BES M05ED-PSD08B-BP02-R03 BES03L8 BES M05ED-POD08B-BP02-R03 BES03L9 BES M05ED-NSD08B-BP02-R03 BES03LA BES M05ED-NOD08B-BP02-R03 10…30 V DC 3V 75 V DC 100 mA Open collector Yes/Yes/Yes –25…+70 °C 3 kHz IP 67 CE, cULus Stainless steel Ceramic N70B200V/5.3×2.4/178173 0.3 m PUR cable with M8 connector, 3-pin 2 m PUR cable, 3×0.14 mm² M5×0.5 DC 3-/4-wire DC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors 10…30 V DC 2.5 V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4 M12 connector, 3-pin Analog distance measurement Ø10e7 12.9 Accessories 40.6 69 27 2.1 17 7 4 Global DC 3-wire AC 2-wire M5×0.5 2.1 7 Inductive sensors AC/DC 2-wire Sealing disk Washer Fastening nut 27 Sealing disk Washer Fastening nut M12×1 Flush 1.5 mm 0...1.2 mm Oil pressure resistant up to 100 bar BHS0035 BES 516-300-S270-S4-D 4 10 M12×1 M8×1 ■ www.balluff.com 585 up to 350 bar Inductive Sensors with Special Properties High pressure rated sensors Ø 10 mm, M12×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Pressure range PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Sealing ring material/size/replacement part number Supporting ring material/size/replacement part number Connection Ø 10e7 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar BHS0030 BES 516-300-S260-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 3-pin BHS007E BES 516-300-S205-D-S4-00,3 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 0.3 m PUR cable with M12 connector, 3-pin BHS004T BES 516-300-S324-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin Connection-Switching diagram, see page 906 37.3 18 max.49 13 30±0.1 M12x1 M12x1 586 For more information, visit us online! Inductive Sensors with Special Properties High pressure rated sensors M12×1 M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1,2 mm Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar BHS004P BES 516-300-S322-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin BHS004R BES 516-300-S323-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin BES042L BES 516-300-S338-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin BES042M BES 516-300-S337-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes 0…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin BHS007C BES 516-300-S341-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories ■ www.balluff.com 587 up to 350 bar Inductive Sensors with Special Properties High pressure rated sensors M12×1, M16×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Pressure range PNP, NO Ordering code Part number PNP, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Sealing ring material/size/replacement part number Supporting ring material/size/replacement part number Connection M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M16×1 Flush 1.5 mm 0...1.2 mm Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar BHS007F BES 516-300-S322-E1-S4-D BHS004N BES 516-300-S321-S4-D BHS001T BES 516-300-S149-S4-D 10…30 V DC 3V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP NBR 60-80/11.0×1.5/709137 PTFE/14×11.6×1.5/709136 M12 connector, 4-pin Connection-Switching diagram, see page 906 17.9 78 17 61.5 3.7 7.4 Ø10e7 10 M12x1 588 For more information, visit us online! Inductive Sensors with Special Properties High pressure rated sensors M16×1 M16×1 Flush 1.5 mm 0...1.2 mm M16×1 Flush 1.5 mm 0...1.2 mm M16×1 Flush 1.5 mm 0...1.2 mm M16×1 Flush 1.5 mm 0...1.2 mm M16×1 Flush 2.5 mm 0...2 mm Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar BHS001E BES 516-300-S129-S4-D BHS001W BES 516-300-S152-S4-D 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP NBR 60-80/11.0×1.5/709137 PTFE/14×11.1×0.7/505953 M12 connector, 4-pin 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP NBR 60-80/11.0×1.5/709137 PTFE/14×11.1×0.7/505953 M12 connector, 4-pin 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP NBR 60-80/11.0×1.5/709137 PTFE/14×11.1×0.7/505953 M12 connector, 4-pin Global DC 3-wire DC 3-/4-wire BHS001C BES 516-300-S128-S4-D BHS001Y BES 516-300-S156-S4-D 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP NBR 60-80/11.0×1.5/709137 PTFE/14×11.6×1.5/709136 M12 connector, 4-pin Inductive sensors DC 2-wire BHS004U BES 516-300-S328-S4-D 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –10…+80 °C 500 Hz IP 68 per BWN Pr. 20 CE Stainless steel EP NBR 60-80/11.0×1.5/709137 PTFE/14×11.1×0.7/505953 M12 connector, 4-pin AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories ■ www.balluff.com 589 350 bar up to 500 bar Inductive Sensors with Special Properties High pressure rated sensors M18×1, M22×1.5, M5×0.5 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Pressure range PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Sealing ring material/size/replacement part number Supporting ring material/size/replacement part number Connection M18×1 Flush 1.5 mm 0...1.2 mm M22×1.5 Flush 3 mm 0...2.1 mm M5×0.5 Flush 1 mm 0...0.8 mm Oil pressure resistant up to 350 bar Oil pressure resistant up to 350 bar Oil pressure resistant up to 500 bar BHS001N BES 516-300-S144-S4-D BHS0036 BES 516-300-S271-S4 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz 10…30 V DC 1.5 V 75 V DC 200 mA 4.7 kΩ Yes/No/No 0…+85 °C 500 Hz Yellow LED IP 68 per BWN Pr. 20 CE Stainless steel POM FPM 70/10.77×2.62/712143 PTFE, 16×11.5×1.4/619072 M12 connector, 4-pin BHS006U BHS G409N-PSD10-EP02 BHS006W BHS G409N-POD10-EP02 BHS006Y BHS G409N-NSD10-EP02 10…30 V DC 2.5 V 75 V DC 100 mA Open collector Yes/No/Yes –25…+80 °C 3 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP NBR 60-80/11.0×1.5/709137 PTFE/14×11.1×0.7/505953 M12 connector, 4-pin IP 68 per BWN Pr. 20 CE Stainless steel ZrO2 NBR 70/2.35×1/154783 PTFE/4.2×0.65×1/154782 2 m PUR cable, 3×0.1 mm² Connection-Switching diagram, see page 906 M5x0.5 Ø4.2g6 7 32 28.1 8.6 Additional cable lengths on request. 8 4 590 For more information, visit us online! Inductive Sensors with Special Properties High pressure rated sensors M5×0.5, M8×1 M5×0.5 Flush 1 mm 0...0.8 mm M5×0.5 Flush 1 mm 0...0.8 mm M8 × 1 Flush 1.5 mm 0...1.2 mm Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar BHS007J BHS G409N-PSD10-EP00,3-GS49 BHS006N BHS G403N-PSD10-S26 BHS006P BHS G403N-POD10-S26 BHS006R BHS G403N-NSD10-S26 10…30 V DC 2.5 V 75 V DC 100 mA Open collector Yes/No/Yes –25…+80 °C 3 kHz BHS005H BHS G408N-PSC10-S49 BHS005F BHS G408N-POC10-S49 BHS005E BHS G408N-NSC10-S49 10…30 V DC 2.5 V 75 V DC 100 mA Open collector Yes/No/Yes –25…+80 °C 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE Stainless steel ZrO2 NBR 70/2.35×1/154783 PTFE/4.2×0.65×1/154782 M8 connector, 3-pin BHS0054 BHS A404N-PSC15-S49 BHS0053 BHS A404N-POC15-S49 BHS0052 BHS A404N-NSC15-S49 10…30 V DC 2.5 V 75 V DC 100 mA Open collector Yes/Yes/Yes 0…+80 °C 4 kHz Yellow LED IP 68 per BWN Pr. 20 CE Stainless steel ZrO2 NBR 70/4×1.5/154149 PTFE/5.3×2.4/154150 M8 connector, 3-pin BHS0050 BHS A402N-PSC15-S49 BHS004Y BHS A402N-NSC15-S49 BHS004Z BHS A402N-POC15-S49 10…30 V DC 2.5 V 75 V DC 100 mA Open collector Yes/Yes/Yes –25…+80 °C 4 kHz Yellow LED IP 68 per BWN Pr. 20 CE Stainless steel ZrO2 NBR 70/4×1.5/154149 PTFE/5.3×2.4/154150 M8 connector, 3-pin IP 68 per BWN Pr. 20 CE Stainless steel ZrO2 NBR 70/2.35×1/154783 PTFE/4.2×0.65×1/154782 M5 connector, 3-pin M5x0.5 M8x1 M8x1 Ø4.2g6 Ø6.5g6 Ø6.5g6 LED LED AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories 12 6 DC 2-wire 13 42 13 55 45 4 32 7 DC 3-/4-wire 6 LED 24 13 12 8.6 40.1 32 7 40.6 8.6 24 19.5 Global DC 3-wire M5x0.5 4 7 4 Inductive sensors Ø4.2g6 8.6 M5x0.5 M8 × 1 Flush 1.5 mm 0...1.2 mm 24 Ø4.2 g6 47 IP 68 per BWN Pr. 20 CE Stainless steel ZrO2 NBR 70/2.35×1/154783 PTFE/4.2×0.65×1/154782 0.3 m PUR cable with M8 connector, 3-pin 26.6 10…30 V DC 2.5 V 75 V DC 100 mA Open collector Yes/No/Yes –25…+80 °C 3 kHz 25.4 M5×0.5 Flush 1 mm 0...0.8 mm M5x0.5 M8x1 M8x1 M8x1 M8x1 ■ www.balluff.com 591 up to 500 bar Inductive Sensors with Special Properties High pressure rated sensors M12×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Pressure range PNP, NO Ordering code Part number PNP, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Sealing ring material/size/replacement part number Supporting ring material/size/replacement part number Connection M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar BHS0023 BES 516-300-S164-S4-D BHS0032 BES 516-300-S262-S4-D 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+90 °C 2 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin BHS004F BES 516-300-S305-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin 122.5 Connection-Switching diagram, see page 906 Simulation (FEM-method) of the stress distribution under high pressure on housing and ceramic cap 592 For more information, visit us online! Inductive Sensors with Special Properties High-pressure resistant sensors M12×1 M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar BHS0033 BES 516-300-S265-S4-D BHS002Y BES 516-300-S249-S4-D BHS005Y BHS B249V-PSD15-S04 BHS0063 BHS B400V-PSD15-S04 BHS0061 BHS B265V-PSD15-S04 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz IP 68 per BWN Pr. 20 CE Stainless steel EP N70B200V/5.3×2.4 NBR/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+120 °C* 400 Hz IP 68 per BWN Pr. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/149621 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+120 °C* 400 Hz IP 68 per BWN Pr. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/149621 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+120 °C* 400 Hz IP 68 per BWN Pr. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/123170 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire M12x1 M12x1 Ø10e7 Ø10e7 15 18 56 56 10 Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large design Ring sensors Hose sensors Analog distance measurement 17 17 AC 2-wire Accessories 16.5 16.5 10 M12x1 M12x1 *Current reduction as a function of ambient temperature range 200 mA 100 mA –25 °C ■ www.balluff.com +75 °C +120 °C 593 up to 500 bar Inductive Sensors with Special Properties High-pressure resistant sensors M12×1 M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar BHS0021 BES 516-300-S162-S4-D BHS0037 BES 516-300-S281-S4-D 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin Connection-Switching diagram, see page 906 17 78 3.7 7.4 Ø10e7 17.9 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin BHS001L BES 516-300-S135-S4-D 61.5 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Pressure range PNP, NO Ordering code Part number PNP, complementary Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Sealing ring material/size/replacement part number Supporting ring material/size/replacement part number Connection 10 M12x1 For more information, visit us online! Inductive Sensors with Special Properties High-pressure resistant sensors M12×1 With temperature output M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar BHS005R BHS B135V-PSD15-S04 BHS005T BHS B135V-PSD15-S04-T01 Inductive sensors Global DC 3-wire Oil pressure resistant up to 500 bar BHS0049 BES 516-300-S298-S4-D BHS0002 BES 516-100-S46-S4-D BHS0001 BES 516-100-S45-S4-D DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+120 °C* 400 Hz IP 68 according to BWN PR. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/149621 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/No/Yes –25…+120 °C* 400 Hz IP 68 according to BWN PR. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/123170 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin Ø10e7 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin Ø10e7 M12x1 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin Ø10e7 Ø10e7 17.9 7.4 3.7 17.9 7.4 3.7 17.9 Analog distance measurement Accessories 78 17 61.5 78 61.5 78 17 78 61.5 37 17 78 61.5 17 17 3.7 18 4.1 18 7 7.4 Ø10e7 Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large design Ring sensors Hose sensors 16.5 10 10 10 10 10 M12x1 M12x1 M12x1 M12x1 M12x1 *Current reduction as a function of ambient temperature range 200 mA 100 mA –25 °C +75 °C ■ www.balluff.com +120 °C 595 up to 500 bar Inductive Sensors with Special Properties High-pressure resistant sensors M12×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Pressure range PNP, NO Ordering code Part number PNP, complementary Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Sealing ring material/size/replacement part number Supporting ring material/size/replacement part number Connection M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar BHS007H BES 516-300-S135-E1-S4-D BHS0022 BES 516-300-S163-S4-D BHS0076 BHS B135V-PAD15-S04-007 10…30 V DC 3V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+85 °C 1.5 kHz IP 68 according to BWN PR. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/149621 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin Connection-Switching diagram, see page 906 18 17.9 7 Ø10e7 78 61.5 17 78 61.5 17 4.1 3.7 7.4 Ø10e7 10 10 M12x1 M12x1 Simulation (FEM-methods) of the voltage distribution under high pressure from housing and ceramic cap 596 For more information, visit us online! Inductive Sensors with Special Properties High-pressure resistant sensors M12×1 M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 2.5 mm 0...2 mm M12×1 Flush 1.5 mm 0...2 mm Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar BES03PP BES 516-300-S335-S4-D BHS004C BES 516-300-S300-S4-D BHS0060 BHS B249V-PSD25-S04-003 BHS0065 BHS B400V-PSD25-S04-003 Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin BHS002U BES 516-300-S242-S4-D 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin AC 2-wire 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+90 °C 400 Hz IP 68 according to BWN PR. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/149621 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin M12x1 Ø10e7 20 18 M12x1 Ø10e7 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+90 °C 400 Hz IP 68 according to BWN PR. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/149621 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large design Ring sensors Hose sensors Analog distance measurement Accessories 17 76.5 56 17 10 ■ www.balluff.com 16.5 93 10 M12x1 597 up to 500 bar Inductive Sensors with Special Properties High-pressure resistant sensors M12×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Pressure range PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Sealing ring material/size/replacement part number Supporting ring material/size/replacement part number Connection M12×1 Flush 2.5 mm 0...2 mm M12×1 Flush 2.5 mm 0...2 mm M12×1 Flush 2.5 mm 0...2 mm Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar BHS0062 BHS B265V-PSD25-S04-003 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+90 °C 400 Hz IP 68 according to BWN PR. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/149621 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin BHS005U BHS B135V-PSD25-S04-003 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+90 °C 400 Hz IP 68 according to BWN PR. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/149621 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin BHS005W BHS B163V-PSD25-S04-003 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+90 °C 400 Hz IP 68 according to BWN PR. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/149621 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin Connection-Switching diagram, see page 906 Ø10e7 Ø10e7 M12x1 16.5 10 93 78 56 17 61.5 17 76.5 17 4.1 15 18 7 12.9 Ø10e7 M12x1 10 10 M12x1 M12x1 598 For more information, visit us online! Inductive Sensors with Special Properties High pressure resistant sensors M18×1 M18×1 Flush 1.5 mm 0...1.2 mm M18×1 Flush 1.5 mm 0...1.2 mm M18×1 Flush 3 mm 0...2.1 mm M18×1 Flush 3 mm 0...2.1 mm Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar BHS004A BES 516-300-S299-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP NBR 60-80/12.42×1.78/642828 PTFE/15×12.2×0.7/642827 M12 connector, 4-pin BHS004J BES 516-300-S308-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP NBR 60-80/12.42×1.78/642828 PTFE/15×12.2×0.7/642827 M12 connector, 4-pin BHS0071 BES 516-300-S334-S4 10…30 V DC 3.5 V 75 V DC 130 mA 2 kΩ Yes/Yes/Yes –25…+80 °C 400 Hz IP 68 according to BWN PR. 20 CE Stainless steel PEEK NBR 85/15.7×20.9×1.5/179002 BHS0026 BES 516-300-S190-S4 10…30 V DC 3.5 V 75 V DC 130 mA 2 kΩ Yes/Yes/Yes –25…+80 °C 400 Hz IP 68 according to BWN PR. 20 CE Stainless steel PEEK NBR 90/13.0×1.5/619531 PTFE/16×13.8×0.5/635431 M12 connector, 4-pin BHS0027 BES 516-300-S203 10…30 V DC 3.5 V 75 V DC 130 mA 4.7 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel PEEK NBR 90/13.0×1.5/619531 M12 connector, 4-pin M18x1 Ø15 f6 58 30.0±0.1 19 45 25.5 ±0.1 Ø16 M18×1 Flush 3 mm 0...2.1 mm M18 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large design Ring sensors Hose sensors Analog distance measurement Accessories M12x1 ■ www.balluff.com 599 up to 500 bar EX Inductive Sensors with Special Properties High pressure rated sensors, EX protected M12×1 M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm Oil pressure resistant up to 350 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar BHS004M BES 516-300-S321-NEX-S4-D 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin BHS0031 BES 516-300-S262-NEX-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+90 °C 2 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin BHS002W BES 516-300-S249-NEX-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP N70B200V/5.3×2.4/631753 PTFE/5.3×2.4/705918 M12 connector, 4-pin Ø10e7 7 18 10 17 78 78 61.5 17 4.1 3.7 7.4 Ø10e7 61.5 Connection-Switching diagram, see page 906 17.9 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Pressure range PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Sealing ring material/size/replacement part number Supporting ring material/size/replacement part number Connection 10 M12x1 M12x1 Sensors with ATEX approval Category 3G Devices in this category are designed for use in areas where explosive atmospheres occur infrequently. Before design, installation and startup, please read the user's guide found at www.balluff.com. 600 For more information, visit us online! Inductive Sensors with Special Properties High pressure rated sensors, Ex protected M12×1, M18×1 M12×1 Flush 1.5 mm 0...1.2 mm M12×1 Flush 1.5 mm 0...1.2 mm M18×1 Flush 1.5 mm 0...1.2 mm Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar Oil pressure resistant up to 500 bar BHS001K BES 516-300-S135-NEX-S4-D 10…30 V DC 1.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+80 °C 1 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP FPM 70/5.85×2.4/636594 PTFE/5.3×2.4/705918 M12 connector, 4-pin BHS005P BHS B135V-PSD15-NEX-S04 10…30 V DC 2.5 V 75 V DC 200 mA 33 kΩ Yes/Yes/Yes –25…+120 °C* 400 Hz IP 68 according to BWN PR. 20 CE Stainless steel Ceramic FPM 80/6.75×1.78/149621 PTFE/10×7.0×1.8/150229 M12 connector, 4-pin BHS004H BES 516-300-S308-NEX-S4-D 10…30 V DC 2V 75 V DC 200 mA 150 kΩ Yes/Yes/Yes –25…+80 °C 2 kHz IP 68 according to BWN PR. 20 CE Stainless steel EP NBR 60-80/12.42×1.78/642828 PTFE/15×12.2×0.7/642827 M12 connector, 4-pin Ø10e7 7 18 17.9 17 Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large design Ring sensors Hose sensors Analog distance measurement 78 61.5 17 78 61.5 4.1 3.7 7.4 Ø10e7 Inductive sensors Accessories 10 10 M12x1 M12x1 *Current reduction as a function of ambient temperature range 200 mA 100 mA –25 °C ■ www.balluff.com +75 °C +120 °C 601 Inductive Sensors with Special Properties NAMUR, high pressure rated sensors, EX protected M12×1 NAMUR High pressure rated EX Ignition protection type "intrinsically safe" used with switching amplifier outside the Ex area Inductive sensors to NAMUR specification consist essentially of an oscillator with a dampable oscillator coil and a demodulator. These high pressure sensors are used, for example, in end-oftravel monitoring on hydraulic cylinders or position detection on valves. They can be used in conjunction with suitable isolating amplifiers, such as from STAHL (see page 603), in potentially explosive systems or spaces classified as Zone 1 or 2. The isolating amplifier must be installed only outside the explosive area. Note Before design, installation and startup, please read the user's guide found at www.balluff.com. You must also observe the requirements for the EC Type Examination Certificate. Ignition protection type "intrinsically safe" Size Fully undamped Fully damped Polarity reversal protected < 9 V Ambient temperature Ta Switching frequency f Degree of protection as per IEC 60529 Material Housing Sensing surface Connection M12×1 Flush 1.5 mm 0...1.2 mm BHS004L BES 516-300-S318-S4-N 8.2 V DC 7.7...9 V DC 75 V DC ≤ 1 mA ≥ 4 mA 1000 Ω 550...1100 Ω Current change (no trigger response) ≥ 4 mA ≤ 1 mA Yes –25...+70 °C 1 kHz IP 68 per BWN Pr. 20 Stainless steel POM M12 connector, 4-pin M12×1 Flush 1.5 mm 0...1.2 mm BHS004K BES 516-300-S315-S4-N 8.2 V DC 7.7...9 V DC 75 V DC ≤ 1 mA ≥ 4 mA 1000 Ω 550...1100 Ω Current change (no trigger response) ≥ 4 mA ≤ 1 mA Yes –25...+70 °C 1 kHz IP 68 per BWN Pr. 20 Stainless steel POM M12 connector, 4-pin O-ring/spare part number Support ring/spare part number Pressure rated (hydraulic) up to 5.85×2.4/636594 10×5.9×1/705918 500 bar 5.85×2.4/636594 10×5.9×1/705918 500 bar EN 60079-0:2004 EN 50020:2002 PTB 01 ATEX 2207 X EX II 2 G EX ia IIC T6 ≤ 30 nF ≤ 0.5 mH 200 mW EN 60079-0:2004 EN 50020:2002 PTB 01 ATEX 2207 X EX II 2 G EX ia IIC T6 ≤ 30 nF ≤ 0.5 mH 200 mW Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa NAMUR Ordering code Part number Rated operating voltage Ue Supply voltage UB Rated insulation voltage Ui Current sr = 0 sr = ∞ consumption at Rated series resistance RV Permissible series resistance RV Output signal: EX-range Conformity For additional data see -EC Type Examination Certificate. Designation Effective internal capacitance Effective internal inductance Maximum input power Pi For additional data see EC Type Examination Certificate. 602 O-ring with support ring O-ring with support ring For more information, visit us online! Inductive Sensors with Special Properties NAMUR, isolating amplifiers Size Ordering code Part number Input Output relay Function change Supply voltage UB Ambient temperature Ta Relative humidity 99×17.6×114.5 mm FHW004P STAHL 9170/20-12-11S NAMUR-specification 2-channel, 1 converter Switching voltage 250 V AC Switching current 4 A AC Switching capacity 50 W/1000 VA via switch 24 V DC –20...+60 °C ≤ 95 %, no condensation 99×17.6×114.5 mm FHW004R STAHL 9170/20-12-21S NAMUR-specification 2-channel, 1 converter Switching voltage 250 V AC Switching current 4 A AC Switching capacity 50 W/1000 VA via switch 120...230 V AC –20...+60 °C ≤ 95 %, no condensation EX area Designation EC Type Examination Certificate EX II (1) GD [EEx ia] IIC/IIB and EX II 3 G EEx nAC II T4 DMT 02 ATEX E 195 X Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large design Ring sensors Hose sensors For safety and other data see EC- Type Examination Certificate. Analog distance measurement Accessories Wiring diagrams Ex-range Safe zone STAHL 9170/20-12-11S The switch amplifier with relay output serves as the interface between electrical signals from the hazardous area (EX- zone) and the non-hazardous area (safe zone). The input signals from NAMUR-sensors are converted using relay switching contacts-at the outputs. Input, output and auxiliary power circuits are galvanically isolated. STAHL 9170/20-12-21S Important! Before design, installation and startup, please read the operating manual found at www.stahl.de. You must also observe the requirements for the EC- Type Examination Certificate. ■ www.balluff.com 603 NAMUR EX Inductive Sensors with Special Properties NAMUR, EX-protected Ø 6.5 mm, M8×1 Ignition protection type "intrinsically safe" used with isolating amplifier outside the Ex area Inductive sensors to NAMUR specification consist essentially of an oscillator with a dampable oscillator coil and a demodulator. Ignition protection type These sensors can be used in conjunction with suitable isolating amplifiers such as from STAHL (see page 603) in explosive systems or zones (see ATEX-marking). The isolating amplifier must be installed only outside the explosive area. Note Before design, installation and startup, please read the user's guide found at www.balluff.com. You must also observe the requirements for the EC-Type Examination Certificate. Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa NAMUR Ordering code Part number Rated operating voltage Ue Supply voltage UB Rated insulation voltage Ui Current consumption self-locking (undamped) conductive (damped) Rated series resistance RV Polarity reversal protected Ambient temperature Ta Switching frequency f Function indicator Degree of protection as per IEC 60529 Material Housing Sensing surface Possible installation variations Connection Ex-range Conformity to standards For additional data see -EC Type Examination Certificate. Designation Ø 6.5 mm Flush 1 mm 0.8 mm BES02ZR BES G06MD-GNX10B-EV02-EEX 8.2 V DC 7.7...9 V DC 75 V DC Current change (no trigger response) ≤ 1 mA ≥ 2.1 mA 1 kΩ No* –25...+70 °C 2 kHz No IP 67 Brass-coated PBT M8 × 1 Flush 1 mm 0...0.8 mm BES02ZT BES M08MD-GNX10B-EV02-EEX 8.2 V DC 7.7...9 V DC 75 V DC Current change (no trigger response) ≤ 1 mA ≥ 2.1 mA 1 kΩ no* –25...+70 °C 2 kHz No IP 67 Brass-coated PBT 2 m PVC cable, 2×0.14 mm² 2 m PVC cable, 2×0.14 mm² EN 50014:1997+A1+A2 EN 50020 BVS 05 ATEX E 163 PTB 05 ATEX 2075 EX II 2G EEx ia IIC T6 EN 50014:1997+A1+A2 EN 50020 BVS 05 ATEX E 163 PTB 05 ATEX 2075 Ex II 2G EEx ia IIC T6 EX II 1D EX iaD 20 T90°C Ex II 1D Ex iaD 20 T90°C Maximum internal capacitance Maximum internal inductance Connected to approved intrinsically safe circuits with the highest values 80 nF 0.07 mH U = 15 V I = 50 mA P = 120 mW 80 nF 0.07 mH U = 15 V I = 50 mA P = 120 mW *Power restriction when using an approved intrinsically safe isolating amplifier Wiring diagrams BES G06.../M08... BES M12.../M18.../M30... Unicompact Shield 1 Connected to NAMUR-isolating amplifier 2 Connected to NAMUR- isolating amplifier 5 Connector body potential compensation 604 For more information, visit us online! Inductive Sensors with Special Properties NAMUR, EX-protected M12×1, M18×1, M30×1.5, 40×40 mm M12×1 mm Flush 4 mm 0...3.2 mm BES02ZU BES M12ME-GNX40B-S04G-EEX 8.2 V DC 7.7...9 V DC 75 V DC Current change (no trigger response) ≤ 1 mA ≥ 2.1 mA 1 kΩ no* –25...+70 °C 700 Hz LED IP 67 Brass-coated PBT M18×1 mm Flush 8 mm 0...6.5 mm BES02ZW BES M18ME1-GNX80B-S04G-EEX 8.2 V DC 7.7...9 V DC 75 V DC Current change (no trigger response) ≤ 1 mA ≥ 2.1 mA 1 kΩ no* –25...+70 °C 400 Hz No IP 67 Brass-coated PBT M30×1.5 mm Flush 15 mm 0...12.2 mm BES02ZY BES M30ME1-GNX15B-S04G-EEX 8.2 V DC 7.7...9 V DC 75 V DC Current change (no trigger response) ≤ 1 mA ≥ 2.1 mA 1 kΩ no* –25...+70 °C 100 Hz No IP 67 Brass-coated PBT M12 connector, 4-pin 40×40×66 mm Unicompact Flush 20 mm 0...16.2 mm BES02ZZ BES Q40KFU-GNX20B-S92G-EEX 8.2 V DC 7.7...9 V DC 75 V DC Current change (no trigger response) ≤ 1 mA ≥ 2.1 mA 1 kΩ no* –25...+70 °C 200 Hz No IP 67 PPE/PPS PBT Image 1...6 M12 connector, 5-pin 40×40×66 mm Unicompact Not flush 35 mm 0...28.4 mm BES0300 BES Q40KFU-GNX35F-S92G-EEX 8.2 V DC 7.7...9 V DC 75 V DC Current change (no trigger response) ≤ 1 mA ≥ 2.1 mA 1 kΩ no* –25...+70 °C 100 Hz No IP 67 PPE/PPS PBT Image 3...6 M12 connector, 5-pin M12 connector, 4-pin M12 connector, 4-pin EN 50014:1997+A1+A2 EN 50020 BVS 05 ATEX E 162 X EN 50014:1997+A1+A2 EN 50020 BVS 05 ATEX E 162 X EN 50014:1997+A1+A2 EN 50020 BVS 05 ATEX E 162 X EN 50014:1997+A1+A2 EN 50020 BVS 05 ATEX E 162 X EN 50014:1997+A1+A2 EN 50020 BVS 05 ATEX E 162 X Ex II 2G EEx ia IIC T6 Ex II 2G EEx ia IIC T6 Ex II 2G EEx ia IIC T6 Ex II 2G EEx ia IIC T6 Ex II 2G EEx ia IIC T6 Ex II 1D Ex iaD 20 T90°C Ex II 1D Ex iaD 20 T90°C Ex II 1D Ex iaD 20 T90°C Ex II 1D Ex iaD 20 T90°C Ex II 1D Ex iaD 20 T90°C 210 nF 0.115 mH U = 15 V I = 50 mA P = 120 mW 200 nF 0.19 mH U = 15 V I = 50 mA P = 120 mW 230 nF 0.21 mH U = 15 V I = 50 mA P = 120 mW 250 nF 0.45 mH U = 15 V I = 50 mA P = 120 mW 220 nF 0.71 mH U = 15 V I = 50 mA P = 120 mW Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large design Ring sensors Hose sensors Analog distance measurement Accessories Permissible installation variations for Unicompact Fig. 1 Fig. 2 ■ www.balluff.com Fig. 3 Fig. 4 Fig. 5 Fig. 6 605 Inductive Sensors with Special Properties Steelface sensors Inductive Steelface sensors with selective response ignore ferrous or non-ferrous metals, depending on the version. The property of being able to ignore ferrous or non-ferrous metals and the particular robustness of the Steelface sensors open up new possibilities in automation technology. Because the sensors are right where the action is. Steelface sensors are used in especially harsh environments and applications too extreme for standard sensors. Here is where they show their strengths: ■ they increase the availability of your systems, ■ reduce your maintenance and storage costs, ■ are resistant to abrasive media and aggressive cleaning agents and ■ provide a robust sensing surface. Correction factors Model Steel Stainless Aluminum Copper FE 360 steel DC M8 Ferrous 1 0.1... 0.7 0 0 M12 ferrous 1 0.1... 0.7 0 0 M12 non ferrous 0 0 1 1.1 M18 ferrous 1 0.1... 0.7 0 0 M18 non ferrous 0 0 1 1.1 M30 ferrous 1 0.1... 0.7 0 0 M30 non ferrous 0 0 1 1.1 Effective switching distance = Rated switching distance × correction factor Brass 0.1 0 0.9 0 0.9 0 0.9 Ferrous: Detection of ferromagnetic steels and irons. Non ferrous: Detection of non-magnetizing metals such as aluminum, copper, brass and many stainless steels. 606 For more information, visit us online! Inductive Sensors with Special Properties Steelface sensors M8×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Function indicator Degree of protection as per IEC 60529 Approvals Special properties M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES02YZ BES M08EG1-PSC15S-S04G-S BES02YY BES M08EG1-NSC15S-S04G-S 10…30 V DC 2V 75 V DC 100 mA Yes/No/Yes –25…+70 °C 20 Hz Yellow LED IP 67 CE Selective ferrous M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES02N5 BES M08EH1-PSC20B-S04G-S BES02N3 BES M08EH1-NSC20B-S04G-S 10…30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 750 Hz Yellow LED IP 67 CE Pressure rated to 80 bar Material Housing Stainless steel Stainless steel Sensing surface Stainless steel Stainless steel M12 connector, 4-pin M12 connector, 4-pin M8x1 Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Accessories 65 44.5 65 64.5 Inductive sensors Analog distance measurement 13 44.5 13 13 40 When using metal mounts, a reduction in the switching distance is to be expected. You should check whether the clamping holder can be used in the application. M8x1 M8x1 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 46 Connection M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES02N6 BES M08EH1-PSC20B-S04G-S01 BES02N4 BES M08EH1-NSC20B-S04G-S01 10…30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 750 Hz Yellow LED IP 67 CE Pressure rated to 80 bar, weld spatter-resistant Stainless steel, PTFE coated Stainless steel, PTFE coated M12 connector, 4-pin LED Ø10.7 M12x1 ■ www.balluff.com LED LED M12x1 M12x1 607 Inductive Sensors with Special Properties Steelface sensors M12×1 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES02Z2 BES M12EG1-PSC20N-S04G-S M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES02NA BES M12EI-PSC40B-S04G-S 10…30 V DC 2V 75 V DC 200 mA Yes/No/Yes –25…+70 °C 50 Hz Yellow LED IP 67 CE Selective non-ferrous M12×1 Flush 2 mm 0...1.6 mm Ŷ BES02Z3 BES M12EG1-PSC20S-S04G-S BES02Z1 BES M12EG1-POC20S-S04G-S BES02Z0 BES M12EG1-NSC20S-S04G-S 10…30 V DC 2V 75 V DC 200 mA Yes/No/Yes –25…+70 °C 50 Hz Yellow LED IP 67 CE Selective ferrous Material Housing Stainless steel Stainless steel Stainless steel Sensing surface Stainless steel Stainless steel Stainless steel M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin 17 M12x1 17 44 65 65 49.5 17 M12x1 2 When using metal mounts, a reduction in the switching distance is to be expected. You should check whether the clamping holder can be used in the application. M12x1 2 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 44 Connection BES02N8 BES M12EI-NSC40B-S04G-S 10…30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 500 Hz Yellow LED IP 67 CE Pressure rated to 60 bar LED LED 65 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Function indicator Degree of protection as per IEC 60529 Approvals Special properties LED M12x1 M12x1 608 M12x1 For more information, visit us online! Inductive Sensors with Special Properties Steelface sensors M12×1, M18×1 M12×1 Not flush 10 mm 0...8.1 mm ŶŶŶ BES02WE BES M12EF1-PSC10F-S04G-S M12×1 Quasi-flush 6 mm 0...4.9 mm ŶŶŶ BES02WH BES M12EG1-PSC60Z-S04G-S11 BES02N9 BES M12EI-NSC40B-S04G-S01 10…30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 500 Hz Yellow LED IP 67 CE Pressure rated to 60 bar, weld spatter-resistant Stainless steel, PTFE coated Stainless steel, PTFE coated M12 connector, 4-pin BES02WC BES M12EF1-NSC10F-S04G-S 10…30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 350 Hz Yellow LED IP 67 CE Pressure rated to 80 bar BES02WF BES M12EG1-NSC60Z-S04G-S11 10…30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 400 Hz Yellow LED IP 67 CE Pressure rated to 80 bar 10…30 V DC 2V 75 V DC 100 mA Yes/No/Yes –25…+70 °C 15 Hz Yellow LED IP 67 CE Selective non-ferrous M18×1 Flush 5 mm 0...4.1 mm Ŷ BES02Z9 BES M18EG1-PSC50S-S04G-S BES02Z7 BES M18EG1-POC50S-S04G-S BES02Z6 BES M18EG1-NSC50S-S04G-S 10…30 V DC 2V 75 V DC 100 mA Yes/No/Yes –25…+70 °C 15 Hz Yellow LED IP 67 CE Selective ferrous Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M18x1 M18x1 5 DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors 66 50 42 Accessories 65 60 60 24 42 41 41 49.5 24 Global DC 3-wire 66 17 50 17 17 Inductive sensors Analog distance measurement 2.5 M12x1 M12x1 M12.1 M18×1 Flush 5 mm 0...4.1 mm Ŷ BES02Z8 BES M18EG1-PSC50N-S04G-S 2.5 M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES02NC BES M12EI-PSC40B-S04G-S01 Ø10.5 LED LED LED M12x1 M12x1 LED LED M12x1 M12x1 M12.1 ■ www.balluff.com 609 Inductive Sensors with Special Properties Steelface sensors M18×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Function indicator Degree of protection as per IEC 60529 Approvals Special properties M18×1 Flush 7.2 mm 0...5.2 mm ŶŶ BES02NJ BES M18EI-PSC72B-S04G-S BES02NF BES M18EI-NSC72B-S04G-S 10…30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 250 Hz Yellow LED IP 67 CE Pressure rated to 40 bar Material Housing Stainless steel Sensing surface Stainless steel M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M18x1 M18x1 M18x1 610 Stainless steel Stainless steel M12 connector, 4-pin 24 24 65 63.5 49 42 24 65 When using metal mounts, a reduction in the switching distance is to be expected. You should check whether the clamping holder can be used in the application. M18×1 Flush 10 mm 0...8.1 mm ŶŶ BES02Y3 BES M18EG1-PSC10Z-S04G-S11 BES02Y2 BES M18EG1-NSC10Z-S04G-S11 10…30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 200 Hz Yellow LED IP 67 CE Pressure rated to 60 bar 49 Connection M18×1 Flush 7.2 mm 0...5.2 mm ŶŶ BES02NK BES M18EI-PSC72B-S04G-S01 BES02NH BES M18EI-NSC72B-S04G-S01 10…30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 250 Hz Yellow LED IP 67 CE Pressure rated to 40 bar, weld spatter-resistant Stainless steel, PTFE coated Stainless steel, PTFE coated M12 connector, 4-pin LED LED M12x1 M12x1 LED M12x1 For more information, visit us online! Inductive Sensors with Special Properties Steelface sensors M18×1, M30×1.5 10…30 V DC 2V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 200 Hz Yellow LED IP 67 CE Pressure rated to 60 bar 10…30 V DC 2V 75 V DC 100 mA Yes/No/Yes –25…+70 °C 15 Hz Yellow LED IP 67 CE Selective non-ferrous M30×1.5 Flush 8 mm 0...6.5 mm Ŷ BES02ZJ BES M30EG1-PSC80S-S04G-S BES02ZF BES M30EG1-NSC80S-S04G-S 10…30 V DC 2V 75 V DC 100 mA Yes/No/Yes –25…+70 °C 15 Hz Yellow LED IP 67 CE Selective ferrous Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M30x1.5 M30x1.5 LED LED Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors 50 66 50 66 63.5 42 40 36 40 36 24 Inductive sensors Analog distance measurement 7 M18x1 2.5 M30×1.5 Flush 8 mm 0...6.5 mm Ŷ BES02ZH BES M30EG1-PSC80N-S04G-S 2.5 M18×1 Not flush 20 mm 0...16.2 mm ŶŶ BES02Y1 BES M18EF1-PSC20F-S04G-S Accessories LED M12x1 M12x1 M12x1 ■ www.balluff.com 611 Inductive Sensors with Special Properties Temperature resistant sensors M5×0.5, M8×1, M12×1 Size Installation type Rated switching distance sn Assured switching distance sa Switching distance marking PNP, Ordering code Part number NO NPN, NO Ordering code Part number NPN, comOrdering code Part number plementary Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie M5×0.5 Flush 0.5 mm 0...0.4 mm Ŷ BES02J2 BES M05ED-PSD05B-ES02-T01 CE Stainless steel PA 6 2 m silicon cable, 3×0.15 mm² Temperature resistant sensors M8 × 1 Flush 1 mm 0...0.8 mm Ŷ BES02HP BES 516-324-SA8-02 M8 × 1 Flush 2 mm 0...1.6 mm ŶŶ BES02HK BES 516-324-SA26-02 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES02HU BES 516-325-SA19-03 BES0361 BES 516-329-SA14-AO-X-03 10...30 V DC 1V 75 V DC ≤ 150 mA (image 1) Polarity reversal protected/transposition protected/short-circuit protected Yes/Yes/Yes Ambient temperature Ta –25…+120 °C Switching frequency f max. 1 kHz Degree of protection as per IEC 60529 IP 67 10...30 V DC 1.5 V 75 V DC ≤ 200 mA (image 2) Yes/No/No –25…+100 °C 2 kHz IP 67 Approvals Material CE Stainless steel PBT 2 m PVC cable, 3×0.14 mm² 10...30 V DC 1.5 V 75 V DC ≤ 200 mA (image 3) Yes/No/No –25…+120 °C 1.5 kHz IP 67, IP 60 cable outlet CE Stainless steel PBT 2 m Teflon cable, 3×0.14 mm² 10...30 V DC PNP 1.8 V, NPN 1.5 V 75 V DC ≤ 200 mA (image 3) Yes/No/No –25…+120 °C 1 kHz IP 68 according to BWN Pr. 20, IP 60 cable outlet CE Brass-coated PEEK 3 m silicon cable, 3×0.5 mm² 3 bar Housing Sensing surface Connection Pressure rated to Connection-Switching diagram, see page 906 Switching distance markings can be found on page 911 Other cable lengths on request. Temperature rated sensors to +120 °C More and more industrial processes are running at higher temperatures. This increases the demands on the sensors. With the high temperature rated sensors from Balluff, you are on the safe side even at high temperatures. Applications ■ Steel production ■ Motor function monitoring ■ Glass manufacturing 612 BES 516-325-SA19- BES 516-329-SA14-A0-X- For more information, visit us online! Inductive Sensors with Special Properties Temperature resistant sensors M18×1, M30×1.5, 25×50×10 mm M18×1 Flush 5 mm 0...4.1 mm Ŷ BES02H6 BES 516-105-SA5 M18×1 Flush 5 mm 0...4.1 mm Ŷ BES02H5 BES 516-105-SA2-05 M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES02H7 BES 516-114-SA1-05 10...30 V DC 1.5 V 75 V DC ≤ 400 mA (image 4) Yes/No/No –25…+120 °C 500 Hz IP 67, IP 60 cable outlet CE Brass-coated PBT 5 m silicon cable, 4×0.75 mm² BES02HC BES 516-120-SA2 10...30 V DC 1.5 V 75 V DC ≤ 400 mA (image 4) Yes/No/No –25…+120 °C 300 Hz IP 67, IP 60 cable outlet CE Brass-coated PBT Silicon cable, 4×0.75 mm², M30×1.5 Not flush 15 mm 0...12.2 mm Ŷ BES02HE BES 516-125-SA1-05 25×50×10 mm Flush 5 mm 0...4.1 mm Ŷ BES02J0 BES 516-347-SA2-03 Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire 10...30 V DC 1.5 V 75 V DC ≤ 400 mA (image 4) Yes/No/No –25…+120 °C 500 Hz IP 67 CE Brass-coated PBT 12 plug connector, 4-pin AC 2-wire 10...30 V DC 1.5 V 75 V DC ≤ 400 mA (image 4) Yes/No/No –25…+120 °C 100 Hz IP 67, IP 60 cable outlet CE Brass-coated PA 12 5 m silicon cable, 4×0.75 mm² 24 V DC ±10 % 2.5 V 75 V DC ≤ 25 mA Yes/Yes/Yes –25…+100 °C 500 Hz IP 67, IP 60 cable outlet CE Cast aluminum PBT 3 m silicon cable, 4×0.75 mm² Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories Cable length: 5 m at BES02H7 9 m at BES02HC Current reduction as a function of ambient temperature range Fig. 1 150 mA 45 mA Fig. 2 200 mA 100 mA –25 °C +50 °C +120 °C ■ www.balluff.com –25 °C Fig. 3 200 mA 100 mA +70 °C +100 °C –25 °C 400 mA Fig. 4 150 mA +70 °C +120 °C –25 °C +70 °C +120 °C 613 Inductive Sensors with Special Properties Temperature resistant sensors Temperature resistant sensors The ultra-high temperature-resistant inductive sensors can be used in temperature ranges up to +160 °C. These sensors are ideally suited to harsh environments in the steel industry, in plastic injection molding machines and in forging and foundry processes. ■ Optimization of system availability ■ Reduction in maintenance costs ■ Increase in process quality Size Installation type Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 614 For more information, visit us online! Inductive Sensors with Special Properties Temperature resistant sensors M18×1, M30×1.5 160 °C M18×1 Flush 5 mm 0...4 mm Ŷ BES043T BES 515-326-SA49-D-TF-02 10...30 V DC 2.5 V 75 V DC 200 mA Yes/No/No –25...+160 °C 200 Hz IP 69K CE Stainless steel PEEK 2 m cable FEP, 3×0.34 mm² M18×1 Not flush 8 mm 0...6.4 mm Ŷ BES043U BES 515-360-SA13-D-TF-02 10...30 V DC 2.5 V 75 V DC 200 mA Yes/No/No –25...+160 °C 200 Hz IP 69K CE Stainless steel PEEK 2 m cable FEP, 3×0.34 mm² M30×1.5 Flush 10 mm 0...8 mm Ŷ BES043W BES 515-327-SA22-D-TF-02 10...30 V DC 2.5 V 75 V DC 200 mA Yes/No/No –25...+160 °C 200 Hz IP 69K CE Stainless steel PEEK 2 m cable FEP, 3×0.34 mm² M18x1 M18x1 M30x1.5 High temperature range M30×1.5 Not flush 15 mm 0...12 mm Ŷ BES043Y BES 515-362-SA4-D-TF-02 10...30 V DC 2.5 V 75 V DC 200 mA Yes/No/No –25...+160 °C 200 Hz IP 69K CE Stainless steel PEEK 2 m cable FEP, 3×0.34 mm² M30x1.5 75 100 85 65 103 95 24 36 88 68 60 80 24 160 °C High temperature range 36 110 160 °C High temperature range 95 160 °C High temperature range Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories Rated operating current 200 50 – 25 °C +40 °C ■ www.balluff.com +160 °C 615 Inductive Sensors with Special Properties Sensors for the food industry – M12x1 standard PROXINOX ® Increased temperature range Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M12×1 Flush 2 mm 0...1.6 mm Ŷ BES02EL BES 515-325-S4-C M12×1 Flush 2 mm 0...1.6 mm Ŷ BES02EH BES 515-325-BO-C-PU-03 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C ≤ 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 3 m PUR cable, 3×0.34 mm² 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C ≤ 3 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 M12 connector, 4-pin M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES02FU BES M12EI-PSC40B-S04G BES02FT BES M12EI-POC40B-S04G BES02FR BES M12EI-NSC40B-S04G 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+85 °C ≤ 1 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel LCP M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. Built tough – stainless steel housing stops aggressive media in its tracks. Inductive sensors are also used more and more in aggressive environments: in machine tools, in the chemical industry, in packaging machines- and the food industry. Aggressive cleaning agents, in connection with high-pressure cleaning devices, do not affect our POXINOX® sensors. 616 For more information, visit us online! Inductive Sensors with Special Properties Sensors for the food industry – M12x1 standard Increased temperature range M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES038C BES M12EI-PSC40B-S04G-009 M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES014W BES M12EE-PSC40B-S04G BES014U BES M12EE-POC40B-S04G M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES02FC BES 515-356-S4-C M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES02F3 BES 515-356-BO-C-03 M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES02F7 BES 515-356-E4-C-03 Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40…+85 °C ≤ 2 kHz Yellow LED IP 67 CE, cULus Stainless steel LCP M12 connector, 4-pin 10…30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+85 °C ≤ 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel LCP M12 connector, 4-pin 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C ≤ 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 M12 connector, 4-pin 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C ≤ 1.5 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 3 m PVC cable, 3×0.34 mm² 10…30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C ≤ 2 kHz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT 3 m PVC cable, 3×0.34 mm² Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors M12x1 37.5 34.5 5 17 Analog distance measurement Accessories LED ■ www.balluff.com 617 PROXINOX ® Inductive Sensors with Special Properties Sensors for the food industry – M18x1 standard Increased temperature range M18×1 Flush 5 mm 0...4.1 mm Ŷ BES02EU BES 515-326-S4-C M18×1 Flush 5 mm 0...4.1 mm Ŷ BES02EN BES 515-326-BO-C-PU-03 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40…+85 °C 900 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 M12 connector, 4-pin 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 900 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 3 m PUR cable, 3×0.34 mm² M18×1 Flush 8 mm 0...6.5 mm ŶŶ BES02H0 BES M18EI-PSC80B-S04G BES02FZ BES M18EI-POC80B-S04G 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40…+85 °C ≤ 700 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PBT M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M18x1 65 83 73 50 24 58 50 Additional cable lengths and PUR cable jacket material available on request. LED 11 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M12x1 618 For more information, visit us online! Inductive Sensors with Special Properties Sensors for the food industry – standard M18×1, M30×1.5 Increased temperature range M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES02FL BES 515-360-S4-C M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES02FH BES 515-360-BO-C-PU-03 M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES02F1 BES 515-327-S4-C M30×1.5 Not flush 15 mm 0...12.2 mm Ŷ BES02FN BES 515-362-S4-C 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40…+85 °C ≤ 600 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 M12 connector, 4-pin 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C ≤ 600 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 3 m PUR cable, 3×0.34 mm² 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C ≤ 300 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 M12 connector, 4-pin 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C ≤ 100 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel PA 12 M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories M12x1 ■ www.balluff.com 619 PROXINOX ® Inductive Sensors with Special Properties Sensors for the food industry – increased requirements PROXINOX® sensors – withstand the harshest cleaning processes In the food- and beverage industry, the chemical industry, and even conveying operations, inductive sensors are routinely cleaned with more and more aggressive methods. Whether acids, bases, steam, foaming cleaners or high-pressure cleaners – PROXINOX®-stainless steel sensors fulfill stringent requirements. Features ■ No function indicator directly on the sensor: The drill hole for the LED is a potential source of danger during cleaning processes and a possible means of entry for bacteria. The function display is completely wrapped in the transparent plastic of the connector. ■ Housing made of stainless steel (material 1.4571): This material is common in the food and beverage- industry. The cable plug has to be adapted to different cleaning and- disinfection agents. ■ Gold-coated contacts: The difficult installation relationships require gold-coated contacts, so that plug corrosion is prevented. ■ Lasered or etched part number: Cleaning- and disinfection processes dissolve type plates. Lasered or etched part numbers are there to stay. ■ Additional O-ring-seals for extreme requirements: temperature shocks – triggered by cleaning and disinfection – cause strong, different residual stress on steel housings and casting resin. Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number Supply voltage UR Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Ambient temperature Ta at load current ≤ 20 mA Ambient temperature range Ta short-time 30 min Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. Current reduction as a function of ambient temperature range 130 mA 20 mA Steam jet tested 620 –40°C +70 °C +85 °C +105 °C For more information, visit us online! Inductive Sensors with Special Properties Sensors for the food industry – increased requirements M12×1, M18×1, M30×1.5 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES02EK BES 515-325-E5-T-S4 10…30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –40…+70 °C –40…+85 °C +105 °C ≤ 800 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus Stainless steel 1.4571 PEEK M12 connector, 4-pin M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES02FA BES 515-356-E5-T-S4 10…30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –40…+70 °C –40…+85 °C +105 °C ≤ 400 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus Stainless steel 1.4571 PEEK M12 connector, 4-pin M18×1 Flush 5 mm 0...4.1 mm Ŷ BES02ET BES 515-326-E5-T-S4 10…30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –40…+70 °C –40…+85 °C +105 °C ≤ 500 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus Stainless steel 1.4571 PA 12 M12 connector, 4-pin M18×1 Not flush 8 mm 0...6.5 mm Ŷ BES02FK BES 515-360-E5-T-S4 10…30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –40…+70 °C –40…+85 °C +105 °C ≤ 200 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus Stainless steel 1.4571 PA 12 M12 connector, 4-pin M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES02F0 BES 515-327-E5-T-S4 10…30 V DC 3.5 V 75 V DC 130 mA Yes/Yes/Yes –40…+70 °C –40…+85 °C +105 °C ≤ 200 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus Stainless steel 1.4571 PA 12 M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories ■ www.balluff.com 621 PROXINOX ® Inductive Sensors with Special Properties Sensors for the food industry – the highest requirements In the food industry and medical and pharmaceutical technology, special requirements are placed on sensors: FDA conformity and testing according to the Ecolab standard. The sensors fulfill the highest requirements: ■ Extended temperature range ■ Safe to clean according to Ecolab ■ FDA conformity ■ Resistant to high-pressure cleaners Steam jet tested IP 69K IP 68 as per BWN 622 Stainless steel Hresistant 2O2 For more information, visit us online! Inductive Sensors with Special Properties Sensors for the food industry – the highest requirements Ø 12 mm, M12×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Connection Housing Sensing surface Ø 12 mm Flush 2 mm 0...1.6 mm Ŷ BES0430 BES G12EE1-PSY20B-S04G-L02 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES0444 BES M12EE1-PSY20B-S04G-L01 10...30 V DC 3.5 V 75 V DC 130 mA* Yes/Yes/Yes –40...+105 °C 800 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus, Ecolab, FDA compliant Stainless steel 1.4571 PEEK M12 connector, 4-pin 10...30 V DC 3.5 V 75 V DC 130 mA* Yes/Yes/Yes –40...+105 °C 800 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus, Ecolab, FDA compliant Stainless steel 1.4571 PEEK M12 connector, 4-pin Ø12h9 50 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. M12×1 Flush 4 mm 0...3.2 mm Ŷ BES0433 BES M12EE-PSC40B-S04G-L01 BES0432 BES M12EE-POC40B-S04G-L01 10...30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+85 °C 2000 Hz IP 69K and IP 68 as per BWN Pr. 20 CE, cULus, Ecolab, FDA compliant Stainless steel 1.4404 LCP M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors 7 Analog distance measurement Accessories M12x1 * Current decrease curve 130 mA 20 mA – 40 °C ■ www.balluff.com +70 °C +85 °C +105 °C 623 PROXINOX ® Inductive Sensors with Special Properties Sensors for the food industry – the highest requirements Ø 12 mm, M12×1 Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Additional cable lengths and PUR cable jacket material available on request. M12×1 Flush 4 mm 0...3.2 mm Ŷ BES0435 BES M12EI-PSC40B-S04G-L01 BES0434 BES M12EI-POC40B-S04G-L01 BES0436 BES M12EI-NSC40B-S04G-L01 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25...+85 °C 1000 Hz IP 69K and IP 68 as per BWN Pr. 20 CE, cULus, Ecolab, FDA compliant Stainless steel 1.4404 LCP 12 plug connector, 4-pin Ø 12 mm Not flush 4 mm 0...3.2 mm Ŷ BES0431 BES G12EE1-PSY40F-S04G-L02 M12×1 Not flush 4 mm 0...3.2 mm Ŷ BES0443 BES G12EE1-PSY40F-S04G-L01 10...30 V DC 3.5 V 75 V DC 130 mA* Yes/Yes/Yes –40...+105 °C 400 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus, Ecolab, FDA compliant Stainless steel 1.4571 PEEK M12 connector, 4-pin 10...30 V DC 3.5 V 75 V DC 130 mA* Yes/Yes/Yes –40...+105 °C 400 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus, Ecolab, FDA compliant Stainless steel 1.4571 PEEK M12 connector, 4-pin Ø12h9 Ø10.6 5 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa 54.5 * Current decrease curve 7 130 mA M12x1 20 mA – 40 °C IP 69K +70 °C IP 68 as per BWN 624 Stainless steel +85 °C +105 °C Hresistant 2O2 For more information, visit us online! Inductive Sensors with Special Properties Sensors for the food industry – the highest requirements Ø 18 mm, M18×1 Ø 18 mm Flush 5 mm 0...4 mm Ŷ BES0439 BES G18EE1-PSY50B-S04G-L02 M18×1 Flush 5 mm 0...4 mm Ŷ BES0441 BES M18EE1-PSY50B-S04G-L01 M18×1 Flush 8 mm 0...6.4 mm Ŷ BES0437 BES M18EI-PSC80B-S04G-L01 BES0438 BES M18EI-POC80B-S04G-L01 Ø 18 mm Not flush 8 mm 0...6.4 mm Ŷ BES043A BES G18EE1-PSY80F-S04G-L02 M18 mm Not flush 8 mm 0...6.4 mm Ŷ BES0442 BES M18EE1-PSY80F-S04G-L01 Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire 10...30 V DC 3.5 V 75 V DC 130 mA* Yes/Yes/Yes –40...+105 °C 500 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus, Ecolab, FDA compliant Stainless steel 1.4571 PEEK M12 connector, 4-pin 10...30 V DC 3.5 V 75 V DC 130 mA* Yes/Yes/Yes –40...+105 °C 500 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus, Ecolab, FDA compliant Stainless steel 1.4571 PEEK M12 connector, 4-pin 10...30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –40...+85 °C 700 Hz IP 69K and IP 68 as per BWN Pr. 20 CE, cULus, Ecolab, FDA compliant Stainless steel 1.4404 PEEK M12 connector, 4-pin Ø18h9 10...30 V DC 3.5 V 75 V DC 130 mA* Yes/Yes/Yes –40...+105 °C 200 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus, Ecolab, FDA compliant Stainless steel 1.4571 PEEK M12 connector, 4-pin Ø18h9 M18x1 30 10 Ø16.5 M12x1 ■ www.balluff.com 29.5 54.5 Accessories 11 65 50 45 LED Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement 24 M12x1 10...30 V DC 3.5 V 75 V DC 130 mA* Yes/Yes/Yes –40...+105 °C 200 Hz IP 69K and IP 68 as per BWN Pr. 27 CE, cULus, Ecolab, FDA compliant Stainless steel 1.4571 PEEK M12 connector, 4-pin M12x1 625 Inductive Sensors with Special Properties Factor 1 Factor 1 sensors identify objects, such as those made of steel, aluminum or brass, with identical switching distances (without reduction factor). These properties provide advantages in applications in which the material of the objects to be detected can vary, or non-ferrous metal can be detected with a high switching distance. Moreover, all Factor 1-sensors are magnetic field immune. Their function is not impaired by strong electromagnetic fields (such as from induction hardening- or welding equipment). Factor 1-sensors are not influenced in their switching behavior by welding currents up to 25 kA (at a distance from the current conductor of approx. 5 cm). Comparison of sensor types/switching distances Switching distance Aluminum Brass Copper Nickel Steel Standard-sensor Factor 1-sensor (F1) 626 For more information, visit us online! Inductive Sensors with Special Properties Factor 1 M8 × 1 Material Housing Sensing surface Connection M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES02YR BES M08EG-PSC15A-S49G-W 10…30 V DC 2.5 V 75 V DC 150 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Stainless steel, PTFE coated PBT, PTFE coated M8 connector, 4-pin M8 × 1 Flush 1.5 mm 0...1.2 mm Ŷ BES02YT BES M08EG1-PSC15A-S04G-W 10…30 V DC 2.5 V 250 V AC ([) 150 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Stainless steel, PTFE coated PBT, PTFE coated M12 connector, 4-pin M8 × 1 Flush 2 mm 0...1.6 mm Ŷ BES03YP BES M08MG1-PSC20A-S04G-W 10…30 V DC 3V 75 V DC 100 mA Yes/Yes/Yes –25…+70 °C 1 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass PTFE coated LCP, PTFE coated M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 13 65 40 49 M8×1 37 40 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories 10.5 Ø10.5 LED M12×1 ■ www.balluff.com 627 Inductive Sensors with Special Properties Factor 1 M12×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number NPN, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection M12×1 Flush 3 mm 0...2.4 mm ŶŶ BES01PZ BES M12MF-PSC30A-S04G M12×1 Flush 3 mm 0...2.4 mm ŶŶ BES02JZ BES M12MF1-PSC30A-S04G-W M12×1 Flush 3 mm 0...2.4 mm ŶŶ BES02K3 BES M12ML-PSC30A-S04G-W 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, coated LCP, PTFE coated 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M12x1 50+2 50 36 17 LED M12x1 628 For more information, visit us online! Inductive Sensors with Special Properties Factor 1 M12×1 M12×1 Flush 3 mm 0...2.2 mm ŶŶ BES02K4 BES M12ML-PSC30A-S04G-W01 M12×1 Flush 4 mm 0...3.2 mm Ŷ BES03YR BES M12MG-PSC40A-S04G-W M12×1 Not flush 8 mm 0...6.5 mm ŶŶ BES01PW BES M12MD-PSC80E-S04G M12×1 Not flush 8 mm 0...6.5 mm ŶŶ BES02JW BES M12MD1-PSC80E-S04G-W M12×1 Not flush 8 mm 0...6.5 mm ŶŶ Inductive sensors Global DC 3-wire DC 3-/4-wire 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating 10…30 V DC 3V 60 V DC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated PPS 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, coated LCP, PTFE coated 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated BES02YU BES M12MD1-NSC80E-S04G 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, coated PA 12 M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M12x1 Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors 10 Analog distance measurement 36 LED M12x1 Accessories 50+2 50 39 56 11.5 Ø10.5 LED AC 2-wire 17 36 17 17 AC/DC 2-wire M12x1 10 M12×1 DC 2-wire LED M12x1 M12×1 ■ www.balluff.com 629 Inductive Sensors with Special Properties Factor 1 M12×1, M18×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection M12×1 Not flush 8 mm 0...6.5 mm ŶŶ BES02K5 BES M12ML-PSC80E-S04G-W 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated M12×1 Not flush 8 mm 0...6.3 mm ŶŶ BES02K6 BES M12ML-PSC80E-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M18×1 Flush 5 mm 0...4 mm Ŷ BES01R3 BES M18MF-PSC50A-S04G 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2.5 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, coated LCP, PTFE coated M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M18x1 50 35 24 LED M12x1 630 For more information, visit us online! Inductive Sensors with Special Properties Factor 1 M18×1 M18×1 Flush 5 mm 0...4 mm Ŷ BES02K9 BES M18MF1-PSC50A-S04G-W 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2.5 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated M18×1 Flush 5 mm 0...4 mm ŶŶ BES02KJ BES M18ML-PSC50A-S04G-W 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2.5 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated M18×1 Flush 5 mm 0...3.9 mm Ŷ BES02KK BES M18ML-PSC50A-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2.5 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M18×1 Flush 5 mm 0...4 mm Ŷ BES01R1 BES M18EL-PSH50A-S04G 10…55 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 600 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Stainless steel LCP M18×1 Flush 8 mm 0...6.4 mm Ŷ BES03YT BES M18MG-PSC80A-S04G-W 10…30 V DC 3V 60 V DC ([) 200 mA Yes/Yes/Yes –25…+70 °C 350 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated PPS M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Accessories 50 7 11 LED Global DC 3-wire Analog distance measurement 24 66 35+1 50+2 M18×1 Inductive sensors M12×1 ■ www.balluff.com 631 Inductive Sensors with Special Properties Factor 1 M18×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection M18×1 Flush 8 mm 0...6.4 mm Ŷ BES03YU BES M18MI-PSC80A-S04G-W M18×1 Not flush 12 mm 0...9.7 mm ŶŶ BES01R2 BES M18MD-PSC12E-S04G M18×1 Not flush 12 mm 0...9.7 mm ŶŶ BES02K7 BES M18MD-PSC12E-S04G-W 10…30 V DC 3V 60 V DC ([) 200 mA Yes/Yes/Yes –25…+70 °C 600 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated PPS 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2.5 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, coated LCP, PTFE coated 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2.5 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 40 M18x1 LED 11 56 24 M12x1 632 For more information, visit us online! Inductive Sensors with Special Properties Factor 1 M18×1 M18×1 Not flush 12 mm 0...9.7 mm ŶŶ BES02KF BES M18ML-PSC12E-S04G-W M18×1 Not flush 12 mm 0...9.5 mm ŶŶ BES02KH BES M18ML-PSC12E-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2.5 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2.5 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M12 connector, 4-pin M12 connector, 4-pin M18×1 Not flush 12 mm 0...10.8 mm ŶŶ BES01R0 BES M18EL-POC12E-S04G 10…30 V DC 2V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 300 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Stainless steel M18×1 Quasi-flush 12 mm 0...9.7 mm ŶŶŶ BES03YW BES M18MG-PSC12A-S04G-W Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire LCP 10…30 V DC 3V 60 V DC ([) 200 mA Yes/Yes/Yes –25…+70 °C 600 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated PPS M12 connector, 4-pin M12 connector, 4-pin AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors M18x1 Analog distance measurement 40 Accessories LED 11 56 24 M12x1 ■ www.balluff.com 633 Inductive Sensors with Special Properties Factor 1 M30×1.5 Housing Sensing surface Possible installation variations Connection M30×1.5 Flush 15 mm 0...12.1 mm ŶŶ BES03YY BES M30MI-PSC15A-S04G-W M30×1.5 Not flush 20 mm 0...16 mm Ŷ BES02KP BES M30ML-PSC20E-S04G-W 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 600 Hz Yellow LED/No IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated 10…30 V DC 3V 60 V DC ([) 200 mA Yes/Yes/Yes –25…+70 °C 250 Hz Yellow LED/No IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 1 kHz Yellow LED/No IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M30x1.5 M30×1.5 36 LED LED M12×1 M12x1 Row mounting Flush 80 mm Ø 120 mm non-flush Permissible installation options Fig. 1 634 11 65 50.5 36 50.5 Material M30×1.5 Flush 10 mm 0...8.1 mm Ŷ BES02KM BES M30ML-PSC10A-S04G-W 66.5 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function/power-on indicator Degree of protection as per IEC 60529 Approvals Special properties Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 For more information, visit us online! Inductive Sensors with Special Properties Factor 1 M30×1.5, 40×40 mm Unicompact M30×1.5 Not flush 20 mm 0...16 mm Ŷ BES03MZ BES M30ML-PSC20E-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 1 kHz Yellow LED/No IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M12 connector, 4-pin 40×40 mm Flush 15 mm 0...11.9 mm Ŷ BES021P BES Q40KFU-PSC15A-S04G BES022K BES Q40KFU-PAC15A-S04G 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 400 Hz Green LED/Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields 40×40 mm Flush 15 mm 0...11.9 mm Ŷ BES021T BES Q40KFU-PSC15A-S04G-W01 BES0214 BES Q40KFU-PAC15A-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 400 Hz Green LED/Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields PBT PBT, ceramic coating PBT, ceramic coating Image 1...8 M12 connector, 4-pin PBT Image 1...8 M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories ■ www.balluff.com 635 Inductive Sensors with Special Properties Factor 1 40×40 mm Unicompact Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function/power-on indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Possible installation variations Connection 40×40 mm Flush 20 mm 0...16 mm ŶŶ BES021U BES Q40KFU-PSC20A-S04G BES0216 BES Q40KFU-PAC20A-S04G 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 400 Hz Green LED/Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields PBT PBT Image 1...8 M12 connector, 4-pin 40×40 mm Not flush 25 mm 0...20.2 mm Ŷ BES021A BES Q40KFU-PAC25E-S04G 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 250 Hz Green LED/Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields PBT PBT Image 3...8 M12 connector, 4-pin Connection-Switching diagram, see page 906 Switching distance markings can be found on page 911 Row mounting Flush 80 mm Ø 120 mm non-flush Permissible installation options Fig. 1 636 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 For more information, visit us online! Inductive Sensors with Special Properties Factor 1 40×40 mm Unicompact 40×40 mm Not flush 35 mm 0...28.4 mm Ŷ BES0220 BES Q40KFU-PSC35E-S04G BES021H BES Q40KFU-PAC35E-S04G 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –10…+70 °C 250 Hz Green LED/Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields PBT PBT Image 3...8 M12 connector, 4-pin 40×40 mm Not flush 35 mm 0...28.1 mm Ŷ BES0221 BES Q40KFU-PSC35E-S04G-W01 BES021K BES Q40KFU-PAC35E-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –10…+70 °C 250 Hz Green LED/Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields PBT, ceramic coating PBT, ceramic coating Image 4...8 M12 connector, 4-pin 40×40 mm Not flush 40 mm 0...32.4 mm ŶŶ BES0223 BES Q40KFU-PSC40E-S04G Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –10…+70 °C 100 Hz Green LED/Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields PBT PBT Image 4...8 M12 connector, 4-pin AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories ■ www.balluff.com 637 Magnetic field immune, weld-immune Inductive Sensors with Special Properties Magnetic field immune sensors Weld-immune sensors – the all-rounder for rough industrial applications Magnetic field immune: Insensitive to magnetic fields which are created from electrical weld currents up to 25 kA (at a distance to the current conductor of approx. 5 cm). Weld spatter-resistant: Resistant to metal injectors, slag and combustion residue which is created during welding processes. Factor 1: Identical switching distance with metals such as steel, stainless steel, aluminum or brass. Note on part number: BES ...-W01 means ceramic coating. Rugged ceramic coating with thick layers for the most extreme welding environments. Magnetic field Current conductor Magnetic field immune sensor Error-free function depends on the magnitude of the welding current and the distance of the sensor from the current carrying line. Through constructive and switching technological measures, magnetic field immune sensors are not influenced by magnetic fields. 638 For more information, visit us online! Inductive Sensors with Special Properties Magnetic field immune sensors M12×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection M12×1 Flush 2 mm 1.6 mm Ŷ BES02J6 BES 516-325-S4-W 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 1 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated M12 connector, 4-pin M12×1 Flush 2 mm 1.6 mm Ŷ BES02J5 BES 516-325-S4-CW 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 1 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Stainless steel, PTFE coated PTFE M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 M12x1 61 40 17 M12×1 Flush 2 mm 1.6 mm Ŷ BES02J7 BES 516-325-S4-WR 10…30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 1 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Stainless steel Ceramic M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories LED M12x1 ■ www.balluff.com 639 Inductive Sensors with Special Properties Magnetic field immune sensors M12×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection Magnetic field immune, weld-immune M12×1 Flush 3 mm 2.2 mm ŶŶ BES02K0 BES M12MF1-PSC30A-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M12×1 Flush 3 mm 2.4 mm ŶŶ BES02K1 BES M12MI-PSC30B-S04G-W 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –5…+60 °C 300 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated M12×1 Flush 3 mm 2.2 mm ŶŶ BES02K2 BES M12MI-PSC30B-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –5…+60 °C 300 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin 50+2 Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 640 For more information, visit us online! Inductive Sensors with Special Properties Magnetic field immune sensors M12×1, M18×1 M12×1 Not flush 8 mm 6.3 mm ŶŶ BES02JY BES M12MD1-PSC80E-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M18×1 Flush 5 mm 3.9 mm Ŷ BES02KA BES M18MF1-PSC50A-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2.5 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M18×1 Flush 5 mm 4 mm Ŷ BES02JA BES 516-326-S4-W 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 500 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated PTFE M18×1 Flush 5 mm 4 mm Ŷ BES02JC BES 516-326-S4-WR 10…30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 100 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement 50+2 35+1 M12×1 Not flush 4 mm 3.2 mm Ŷ BES02JN BES 516-356-S4-W 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 1 kHz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Stainless steel, PTFE coated PTFE Accessories M12x1 ■ www.balluff.com 641 Inductive Sensors with Special Properties Magnetic field immune sensors M18×1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection Magnetic field immune, weld-immune M18×1 Flush 7 mm 5.6 mm ŶŶ BES02KC BES M18MI-PSC70B-S04G-W 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –5…+60 °C 50 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated M18×1 Flush 7 mm 5.5 mm ŶŶ BES02KE BES M18MI-PSC70B-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –5…+60 °C 50 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M18×1 Not flush 8 mm 6.4 mm Ŷ BES02JR BES 516-360-S4-W 10…30 V DC 1.5 V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 200 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated PTFE M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 642 For more information, visit us online! Inductive Sensors with Special Properties Magnetic field immune sensors M18×1, M30×1.5 M18×1 Not flush 12 mm 9.5 mm ŶŶ BES02K8 BES M18MD-PSC12E-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 2.5 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M30×1.5 Flush 10 mm 8.1 mm Ŷ BES02JJ BES 516-327-S4-W 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 100 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated PTFE M30×1.5 Flush 10 mm 7.9 mm Ŷ BES02KN BES M30ML-PSC10A-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 600 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M30×1.5 Flush 10 mm 8.1 mm Ŷ BES02JK BES 516-327-S4-WR 10…30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 50 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic M30×1.5 Flush 13 mm 10.5 mm Ŷ BES02KL BES M30MI-PSC13B-S04G-W 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –5…+60 °C 30 Hz Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated LCP, PTFE coated M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M30x1.5 65 65 50.5 36 50.5 36 M30x1.5 LED Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories LED M12x1 Inductive sensors M12x1 M12x1 ■ www.balluff.com 643 Magnetic field immune, weld-immune Inductive Sensors with Special Properties Magnetic field immune sensors M30×1.5, 32×20×8 mm R01 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function/power-on indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Connection M30×1.5 Flush 13 mm 10.3 mm Ŷ BES03F1 BES M30MI-PSC13B-S04G-W01 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –5…+60 °C 30 Hz Yellow LED/No IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated Ceramic coating M30×1.5 Not flush 15 mm 12.2 mm Ŷ BES02JU BES 516-362-S4-W 10…30 V DC 1.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –25…+70 °C 100 Hz Yellow LED/No IP 67 CE Interference-proof against magnetic AC and DC fields Brass, PTFE coated PTFE 32×20×8 mm R01 Flush 5 mm 4 mm Ŷ BES02KW BES R01ZC-PSC50B-BX05-W01 10…30 V DC 2.5 V 75 V DC 200 mA Yes/Yes/Yes –25…+70 °C 100 Hz Green LED/Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields Cast zinc M12 connector, 4-pin M12 connector, 4-pin 5 m PUR cable cross-linked, 3×0.25 mm² Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Ceramic coating M30x1.5 65 50.5 36 LED M12x1 644 For more information, visit us online! Inductive Sensors with Special Properties Magnetic field immune sensors 40×40 mm Unicompact Note permissible installation variants. Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking Ordering code PNP, complementary Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function/power-on indicator Degree of protection as per IEC 60529 Approvals Special properties Material Housing Sensing surface Possible installation variations Connection 40×40×62 mm Not flush 40 mm 32.4 mm ŶŶ BES02JR BES Q40KFU-PAC40E-S04G 10…30 V DC 2.5 V 250 V AC ([) 200 mA Yes/Yes/Yes –10…+70 °C 100 Hz Green LED/Yellow LED IP 67 CE Interference-proof against magnetic AC and DC fields PBT PBT Image 3...8 M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories Row mounting Flush 80 mm Ø 120 mm non-flush Permissible installation options Fig. 1 ■ www.balluff.com Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 645 Inductive Sensors with Special Properties DESINA diagnostic sensors DESINA sensors with diagnostic output These inductive sensors are specially designed according to the DESINA specification for demanding use in machine tools. The additional diagnostic- output monitors the function of the switch and the supply feed. As long as the sensor is functional, a highsignal is emitted. Balluff sensors with DESINA specification fulfill the requirements of the ISO 23570 part 1 standard: "Industrial automation systems and integration – Distributed installation in industrial applications – Part 1: Sensors and actuators". Note For reliable function monitoring, plug connectors without function indicators have to be used. Additional Features Factor 1 sensors identify objects, such as those made of steel, aluminum or brass, with identical switching distances (without reduction factor). This property offers advantages in applications where the material of the objects to be detected can vary. Moreover, all Factor 1-sensors are magnetic field immune. Their function is not impaired by strong electromagnetic fields (such as from induction hardening- or welding equipment). Factor 1 sensors are not affected in their switching behavior by weld currents up to 25 kA. Note on part numbering BES ...-M01: Diagnostic function for function monitoring of the sensor and the supply line. As long as the sensor is functional, a high- signal is emitted on the monitor output. BES ...-WM01: Diagnostic function and Teflon coating (weld splatter resistant) Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Monitor output load capacity Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function/power-on indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection The meaning of switching distance markings can be found on page 911 Wiring diagram Sensor Monitor 646 For more information, visit us online! Inductive Sensors with Special Properties DESINA diagnostic sensors M12×1, M18×1, 40×40 Unicompact Weld immune Magnetic field immune Factor 1 M12×1 Flush 2 mm 0...1.6 mm Ŷ BES01ZL BES M12MI-PSC20B-S04G-M01 10…30 V DC ≤ 2.5 V 250 V AC ([) 200 mA max. 50 mA Yes/Yes/Yes –25…+70 °C 2 kHz Yellow LED/No IP 68 per BWN Pr. 20 CE, cULus Brass-coated LCP M12 connector, 4-pin M12×1 Flush 4 mm 0...3.2 mm ŶŶ BES01ZM BES M12MI-PSC40B-S04G-M01 10…30 V DC ≤ 2.5 V 250 V AC ([) 200 mA max. 50 mA Yes/Yes/Yes –25…+70 °C 1 kHz Yellow LED/No IP 68 per BWN Pr. 20 CE, cULus Brass-coated LCP M12 connector, 4-pin M18×1 Flush 5 mm 0...4.1 mm Ŷ BES0200 BES M18MI-PSC50A-S04G-WM01 10…30 V DC ≤ 3.5 V 250 V AC ([) 200 mA max. 50 mA Yes/Yes/Yes –25…+70 °C 15 Hz Yellow LED/No IP 67 CE, cULus Brass-coated PTFE coated M12 connector, 4-pin Magnetic field immune Factor 1 40×40×62 mm Unicompact Flush 15 mm 0...12.2 mm Ŷ BES021R BES Q40KFU-PSC15A-S04G-M01 10…30 V DC ≤ 3.5 V 250 V AC ([) 200 mA max. 50 mA Yes/Yes/Yes –25…+70 °C 13 Hz Green LED/Yellow LED IP 67 CE, cULus PBT PBT M12 connector, 4-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories Row mounting Flush 80 mm Mounting options Fig. 1 ■ www.balluff.com Fig. 2 Fig. 3 Fig. 4 647 Inductive Sensors with Special Properties DESINA diagnostic sensors High pressure rated, M12×1 Inductive sensors high pressure rated to 500 bar, with diagnostics and setup aid. This high pressure rated inductive sensor is used for position sensing of the piston position in hydraulic cylinders. Here, the active surface is subjected to high pressure inside the cylinder. Balluff has developed a special manufacturing technique for making the sensing surface extremely resistant. This is because the coils are encased in a duromer material. The additional diagnostic output monitors the function of the switch and the supply feed. As long as the sensor is functional, a high- signal is emitted. The optical setup aid indicates when the optimum distance of the sensing face from the piston has been reached. This simplifies installation and helps to prevent damage to the sensor. Note For reliable function monitoring, plug connectors without function indicators have to be used. Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Monitor output load capacity Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface O-ring/spare part number Support ring/spare part number Connection M12×1 Flush 1.5 mm 0...1.2 mm Ŷ BHS006C BES M12EL-PSC15B-S04G-HM01 10…30 V DC 3.7 V 75 V AC 200 mA max. 50 mA Yes/Yes/Yes –25…+70 °C 300 Hz Yellow LED IP 68 per BWN Pr. 20 CE, cULus Stainless steel EP 5.3×2.4/631753 10×5.9×1/705918 M12 connector, 4-pin High pressure rated to 500 bar The meaning of switching distance markings can be found on page 911 Wiring diagram Sensor Monitor 648 For more information, visit us online! Inductive Sensors with Special Properties Desina diagnostic sensors Function Sensors with dynamic function diagnostics enable monitoring of the sensor functions, including the connection lines. In addition, the oscillator state is changed by means of a pulse generator while the switch is operating. As soon as there is any damage to the sensor head or the oscillator fails electrically, the pulse generator can no longer change the oscillator state and there are no longer pulses on the output. The pulse frequency is f ~ 160 Hz and the is pulse duration t ~ 300 μs. The pulse-/pause ratio of t ~ 5 % is selected small enough that the test pulses can be filtered out by the input filter of a controller, or, for example, a relay can be directly controlled. The information "proximity switch -damped or undamped" can therefore be evaluated in the usual fashion. Balluff offers a function diagnostics unit which can be easily installed in a controller: ■ Function diagnostic unit (see accessories for inductive sensors) ■ BES 113-FD-1 (for 1 sensor) The following may be connected: Inductive sensors BES 113-356-SA6-S4 (normally open function), BES 113-356-SA31-S4 (normally open function), BES 113-3019-SA1-S4 (normally closed function) and the capacitive sensors BCS 20MG10-XPA1Y-8B-03 (complementary) Inductive sensors Global DC 3-wire DC 3-/4-wire Function monitoring The test pulses, and with them the sensor function, are monitored by an additional electronics system, which signal error-free function by means of a high level on the "Status/Output" message- output. DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Damping travel Switching threshold Damped Undamped Damped Output signal Proximity switch with function diagnostics Error Relay output Processors Analog distance measurement Accessories Status output Pulse diagram of a proximity switch with function diagnostics (normally closed). Installation note The signal line to the function diagnostics unit should be connected as close as possible to the load RL (point A). When Point B is connected the cable segment between B and load RL is not monitored. The system described here is not suitable for systems with protection for persons. For additional information, please request a device description. ■ www.balluff.com 649 Inductive Sensors with Special Properties Diagnostic sensors with Dynamic Sensor Control rc ge Pa ram ete ssa me Err or Wa rn ing gs Increase in diagnostic accuracy and functionality Information Data Sw itc hin Knowledge ■ Continuous signal ■ Diagnostics ■ Parameter configuration D S C 650 me tat e ssa ge on fig ura t ion Dynamic Sensor Control increases the value of your machine concepts through ■ Increased availability ■ Simpler and more efficient commissioning ■ More efficient maintenance ■ Switching signal ■ Diagnostics ■ Warning messages ■ Switching signal ■ Diagnostics 1/0 ■ Switching signal For more information, visit us online! Inductive Sensors with Special Properties D S C Diagnostic sensors with Dynamic Sensor Control M12x1 Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, NC Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui (protection class) Rated operating current Ie Minimum operating current Im Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Actual switching distance s Ambient temperature Ta Switching frequency f max. Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Note For function diagnostics switches with connector option, do not use connectors with integrated LED- function indicator, since the LED is parallel to the load RL and cable break monitoring is then no longer assured. The switch function can however be monitored on the LEDs in the evaluation unit. ■ www.balluff.com M12×1 Not flush 3.7 mm 0...3 mm Ŷ BES02MC BES 113-356-SA6-S4 BES02M5 BES 113-3019-SA1-S4 20…30 V DC Typ. 2.5 V 75 V AC 130 mA 1 mA Open collector Yes/Yes/Yes 3.7 mm +20 %/–10 % –25…+70 °C 300 Hz IP 67 CE Brass-coated PA 12 M12 connector, 4-pin, (cable length ≤ 50 m to the controller) M12×1 Not flush 4 mm 0...3 mm Ŷ BES02M8 BES 113-356-SA31-S4 Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire 20…30 V DC Typ. 3.5 V 75 V AC 130 mA 5 mA Open collector Yes/Yes/Yes 4 mm +20 %/–10 % 0…+70 °C 300 Hz IP 67 CE Brass-coated LCP M12 connector, 4-pin, (cable length ≤ 50 m to the controller) AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories 651 Inductive Sensors with Special Properties Large design Size Installation type (pay attention to the note in the Basic Information chapter) Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number PNP, complementary Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function/power-on indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Large designs Ø 80×67 mm Not flush 50 mm 0…40.5 mm Ŷ BES02RN BES IKJ-S-050-P-2-S-S4-C 10…55 V DC 2V 75 V DC 200 mA Open collector Yes/Yes/Yes –25…+70 °C 100 Hz Red LED/No IP 67 CE PBT PBT M12 connector, 4-pin Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 652 For more information, visit us online! Inductive Sensors with Special Properties Large designs 35×35×100 mm Not flush 30 mm (adjustable with teach-in key) 0…24.3 mm Ŷ 35×35×300 mm Not flush 30 mm (adjustable) 0…24.3 mm Ŷ 110×110×43 mm Not flush 70 mm (adjustable with teach-in key) 0…56.7 mm Ŷ Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire BES02TN BES IKU-031.28-S4 10…30 V DC 2V 75 V DC 200 mA Open collector Yes/Yes/No –25…+70 °C 50 Hz Red LED/No IP 65 CE PVC PVC M12 connector, 4-pin 300 290 47 35 LED Ø4.2 25 40 M12x1 7 35 7 Sensing surface BES02RU BES IKN-070T.38-G-S4 10…55 V DC 2V 75 V DC 200 mA Open collector Yes/Yes/Yes 0…+70 °C 50 Hz Red LED/Green LED (1 LED with color change) IP 67 CE PBT PBT M12 connector, 4-pin Sensing surface BES02TF BES IKU-011T.28-G-S4 10…30 V DC 2V 75 V DC 400 mA Open collector Yes/Yes/Yes –25…+70 °C 50 Hz Red LED/No IP 65 CE PVC PVC M12 connector, 4-pin AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement Accessories ■ www.balluff.com 653 Ring sensors Inductive Sensors with Special Properties Ring sensors Size Installation type (pay attention to the note in the Basic Information chapter) Inside diameter dw Minimum object size steel taper (St 37) Target velocity max. PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function/power-on indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Pulse stretching ■ Easy installation (since they can be mounted side-by-side and universally installed and can be stacked with a spacing of > 20 mm) ■ Very reliable (due to inductive sensor principle) ■ Optimal for detecting small parts (with integrated pulse extension, permanently set) Connection-Switching diagram, see page 906 Installation in series: Installation in a stack: Applications ■ Detection of nails, screws, welded studs, rivets, etc. ■ Eject monitoring ■ Part counting ■ Checking for wire breaks ■ Nail machines for creating pallets ■ Feed check in assembly technology ■ Blockage warning in feed hoses 654 For more information, visit us online! Inductive Sensors with Special Properties Ring sensors, 35×60×20 mm, 115×80×30 mm 35×60×20 mm Not flush Ø 10.1 mm Ø 2 mm 60 m/s BES03JA BES IKVS-010.23-G-S4 10…30 V DC ≤2V 75 V DC 400 mA Open collector Yes/Yes/Yes –25…+70 °C 16 Hz Green LED/Yellow LED IP 65 CE PBT PVC M12 connector, 4-pin 35×60×20 mm Not flush Ø 15.1 mm Ø 3 mm 60 m/s BES03JC BES IKVS-015.23-G-S4 10…30 V DC ≤2V 75 V DC 400 mA Open collector Yes/Yes/Yes –25…+70 °C 16 Hz Green LED/Yellow LED IP 65 CE PBT PVC M12 connector, 4-pin 35×60×20 mm Not flush Ø 25.1 mm Ø 4 mm 60 m/s BES03JH BES IKVS-025.23-G-S4 10…30 V DC ≤2V 75 V DC 400 mA Open collector Yes/Yes/Yes –25…+70 °C 16 Hz Green LED/Yellow LED IP 65 CE PBT PVC M12 connector, 4-pin 115×80×30 mm Not flush Ø 45 mm Ø 9 mm 20 m/s BES02TJ BES IKV-045.23-G-Z-S4 10…30 V DC ≤2V 75 V DC 200 mA Open collector Yes/Yes/Yes –25…+70 °C 16 Hz Green LED/Yellow LED IP 65 CE PBT PBT M12 connector, 4-pin 60 ms 60 ms 60 ms Can be set between 2.5…250 ms 35.0 35.0 15.1 25.1 Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire 115 65 Ø7 38 42.5 60 60 38 42.5 42.5 38 60 Ø45 35.0 10.1 Inductive sensors Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors Analog distance measurement 10 Ø4 .4 80 11.0 11.0 11.0 60 6$ 30 M12×1 M12×1 16.0 M12×1 20.0 M12×1 16.0 26.0 20.0 26.0 16.0 26.0 20.0 10 .4 Ø4 10 Ø4 .4 10 Accessories 7,0( LED LED ■ www.balluff.com LED LED LED LED LED 655 Inductive Sensors with Special Properties Hose sensors Hose sensors, 17×78.5×11.9 mm Inductive tube sensors BES extend our line of ring sensors. Optimized for tube infeeds in automated assembly, they detect small parts easily and reliably. ■ Simple attachment to the infeed tube ■ Pulse extension of 150 ms results in a reliable detection of fastmoving parts. ■ Object speed max. 20 m/s 656 For more information, visit us online! Inductive Sensors with Special Properties Hose sensors, 17×78.5×11.9 mm Size Installation type (pay attention to the note in the Basic Information chapter) Minimum object size Rated switching distance sn Assured switching distance sa Switching distance marking PNP, NO Ordering code Part number Supply voltage UB Voltage drop Ud at Ie max. Rated insulation voltage Ui Rated operating current Ie Output resistance Ra Polarity reversal protected/transposition protected/short-circuit protected Ambient temperature Ta Switching frequency f max. Output function indicator Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Pulse stretching 17×78.5×11.9 mm Not flush Screw M3×5 16 mm 12.8 mm Ŷ BES0428 BES Z06K-PSC16F-S49G 10…30 V DC 2.5 V 75 V DC 200 mA Open collector Yes/Yes/Yes –25…+70 °C 10 Hz Yellow LED IP 67 CE PA 6.6 UN 3082 M8 connector, 3-pin 150 ms Connection-Switching diagram, see page 906 The meaning of switching distance markings can be found on page 911 17×78.5×11.9 mm Not flush Screw M3×5 16 mm 12.8 mm Ŷ BES0429 BES Z06K-PSC16F-BP00,1-GS04 10…30 V DC 2.5 V 75 V DC 200 mA Open collector Yes/Yes/Yes –25…+70 °C 10 Hz Yellow LED IP 67 CE PA 6.6 UN 3082 0.1 m PUR cable with M12 connector, 3-pin 150 ms 9.4 Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties High pressure rated sensors Ex sensors Steelface sensors High temperature rated sensors Sensors for the food industry Factor 1 sensors Weld and magnetic field immune sensors Diagnostics sensors Large designs Ring sensors Hose sensors 87.5 ,%$ Sensing surface LED 78.5 Centerline spacing for side-by-side mounting Sensing surface Rated switching distance sn relative to steel plate FE360 (18×18×1 mm) Inductive sensors Analog distance measurement Accessories M8×1 MAX 17 R2 19 11.9 0 2 -® ■ www.balluff.com 657 Inductive Sensors Inductive sensors for analog distance measurement Balluff inductive distance sensors BAW provide an absolute voltageor current signal that changes proportionally to the distance of a metallic target. Objects of varying shape and size made of ferrous or non-ferrous materials damp the sensor to different degrees. This provides a simple way of detecting positions, distances and material differences. 658 For more information, visit us online! Inductive Sensors for Analog Distance Measurement Contents Tubular-style housings Ø 6.5 M8×1 M12×1 M18×1 M30×1.5 M12x1 high-pressure resistant 662 662 663 667 670 672 Block designs 10×30×6 mm (R03) 20x30x8 mm (R06) 14x38.5x17 (Z05) 80x80x40 mm 80x45x20 mm 673 674 675 676 677 Basic information and definitions can be found on page 884. ■ www.balluff.com 659 Inductive Sensors for Analog Distance Measurement Features, output curve, evaluating programmed switching points Features ■ Distance-proportional analog output signal ■ Contactless, absolute measuring principle ■ Wide variety of designs: cylindrical and cubical ■ Measuring ranges from 0.5...50 mm ■ High repeat accuracy ■ Optimal linearity ■ Low temperature drift ■ Measuring speed up to 40 m/s ■ LED for restricting the working range ■ Insensitive to contamination Output characteristics Evaluating programmed switching points (brake disk example) Wear Critical area Workingrange Brake disk LED off LED off 660 LED on LED on For more information, visit us online! Inductive Sensors for Analog Distance Measurement Sensors in Use Applications Examples of the various industrial applications include: ■ Distance sensing (even at high travel speeds) ■ Measurement of film and sheet thicknesses ■ Belt center measurement ■ Measurement of metal strip widths ■ Detection of surface waves ■ Counting tasks ■ Positioning ■ Position checking ■ Camping distance monitoring ■ Selection of different sizes and materials Axial approach Sensing a rotating object Lateral approach Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire Distance changes in the sensor axis result in output signals proportional to distance. Eccentrics, cams or unbalanced motion result in a periodic change in the output signal. Detecting longer distances by sensing an inclined plane. Sensing various materials Distance measurements at high object travel speeds Detecting installed seal rings AC 2-wire Special properties Analog distance measurement Cylinder designs Block designs Accessories When the distance is kept constant, the output signal changes only when the object material is different. Even at high traverse speeds distances can be precisely measured. The seal ring effectively reduces the distance between the nut/screw and the sensor, thereby changing the output signal. Tie rod length change on an injection molding machine Tie rod In injection molding machines, the clamping force of the tool is built up through a toggle joint and a hydraulic cylinder. The extension of the machine tie rods is thereby directly proportional to the clamping force, and can be easily determined using an inductive distance sensor. ■ www.balluff.com 661 Inductive Sensors for Analog Distance Measurement Cylinder designs, Ø 6.5 mm, M8×1 Distance sensors are assigned the linear position sensing and measurement that we have marked in blue. Temperature output Series Installation type (pay attention to the note in the Basic Information chapter) Output signal Linear range sl Ordering code Part name Supply voltage UB Rated insulation voltage Ui (protection class) Effective distance se Load resistance RL min. Load resistance RL max. Polarity reversal protected/transposition protected/short-circuit protected Adjustment display (LED) Ambient temperature Ta Repeat accuracy RBWN Non-linearity max. Limit frequency (–3 dB) Response time Temperature coefficient, typically in range from +10...+50 °C Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection Ø 6.5 mm Flush Voltage, 0...10 V 0.5...2 mm BAW000L BAW G06EF-UAC20B-S49G 15...30 V DC 75 V DC 1.25 mm 2 kΩ Ø 6.5 mm Flush Voltage, 0...10 V 0.5...2 mm BAW000J BAW G06EE-UAF20B-EP03-K 21.6...26.4 V DC 75 V DC 1.25 mm 5 kΩ M8 × 1 Flush Voltage, 0...10 V 0.5...1.5 mm BAW000N BAW M08EI-UAD15B-BP00,2-GS04 15...30 V DC 250 V AC ([) 1 mm 2 kΩ Yes/Yes/Yes Yes +10...+60°C* ±40.0 μm ±45 μm 1 kHz 0.5 ms -0.6 μm/K IP 67 CE, cULus Stainless steel PBT M8 connector, 3-pin No/No/No No +10...+60°C* ±10.0 μm ±45 μm 1 kHz 1 ms –1 μm/K IP 67 CE Stainless steel PBT 3 m PUR cable, 4×0.14 mm² Yes/Yes/Yes No –10...+70 °C ±8.0 μm ±30 μm 1 kHz 0.5 ms –1 μm/K IP 67 CE, cULus Stainless steel PBT 0.2 m PUR cable with M12 connector, 3-pin * The function is assured over a range of –10...+70 °C Wiring diagrams Connector, voltage output Cable, voltage output Connector, current output Temperature output Typical Cable, current output The temperature output (not shortcircuit protected) provides a signal representing a precisely measured temperature change. 662 For more information, visit us online! Inductive Sensors for Analog Distance Measurement Cylinder designs, M8×1, M12×1 M8 × 1 Flush Voltage, 0...10 V 0.5...1.5 mm BAW003R BAW M08EH-UAD15B-S04G 15...30 V DC 250 V AC 1 mm 2 kΩ Yes/Yes/Yes No –10...+70 °C ±40.0 μm ±30 μm 1 kHz 0.5 ms 0 μm/K IP 67 CE, cULus Stainless steel PBT M12 connector, 3-pin M8 × 1 Flush Voltage, 0...10 V 0.5...1.5 mm BAW000M BAW M08EF-UAC15B-S49G 15...30 V DC 250 V AC ([) 1 mm 2 kΩ Yes/Yes/Yes Yes –10...+70 °C ±40.0 μm ±30 μm 1 kHz 0.5 ms 0 μm/K IP 67 CE, cULus Stainless steel PBT M8 connector, 3-pin M8 × 1 Flush Voltage, 0...10 V 0.5...1.5 mm BAW000T BAW M08EI-UAD15B-BP03 15...30 V DC 250 V AC ([) 1 mm 2 kΩ Yes/Yes/Yes No –10...+70 °C ±8.0 μm ±30 μm 1 kHz 0.5 ms –1 μm/K IP 67 CE, cULus Stainless steel PBT 3 m PUR cable, 3×0.14 mm² M8 × 1 Not flush Voltage, 0...10 V 0.5...2.5 mm BAW000W BAW M08EI-UAD25F-BP03 15...30 V DC 250 V AC ([) 1.5 mm 2 kΩ Yes/Yes/Yes No –10...+60 °C* ±10.0 μm ±60 μm 1 kHz 1 ms –1.5 μm/K IP 67 CE, cULus Stainless steel PBT 3 m PUR cable, 3×0.14 mm² M12×1 Flush Current, 4...20 mA 0.5...2 mm BAW001F BAW M12MG2-ICC20B-BP00,2-GS04 10...30 V DC 250 V AC ([) 1.25 mm 500 Ω Yes/Yes/Yes Yes –10...+70 °C ±5.0 μm ±45 μm 500 Hz 0.5 ms –0.5 μm/K IP 67 CE, cULus Brass, coated PBT 0.2 m PUR cable with M12 connector, 3-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Cylinder designs Block designs Accessories 58 13 43.5 M8x1 M12x1 ■ www.balluff.com 663 Inductive Sensors for Analog Distance Measurement Cylinder designs, M12×1 Distance sensors are assigned the linear position sensing and measurement that we have marked in blue. Series Installation type (pay attention...the note in the Basic Information chapter) Output signal Linear range sl Ordering code Part name Supply voltage UB Rated insulation voltage Ui (protection class) Effective distance se Load resistance RL min. Load resistance RL max. Polarity reversal protected/transposition protected/short-circuit protected Adjustment display (LED) Ambient temperature Ta Repeat accuracy RBWN Non-linearity max. Limit frequency (–3 dB) Response time Temperature coefficient, typically in range from +10...+50 °C Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M12×1 Flush Current, 4...20 mA 0.5...2 mm BAW001H BAW M12MG2-ICC20B-BP03 10...30 V DC 250 V AC ([) 1.25 mm 500 Ω Yes/Yes/Yes Yes –10...+70 °C ±6.0 μm ±45 μm 500 Hz 0.5 ms –0.5 μm/K IP 67 CE, cULus Brass, coated PBT 3 m PUR cable, 3×0.34 mm² M12×1 Flush Voltage, 0...10 V 0.5...2 mm BAW001J BAW M12MG2-UAC20B-BP00,2-GS04 15...30 V DC 250 V AC ([) 1.25 mm 2 kΩ M12×1 Flush Voltage, 0...10 V 0.5...2 mm BAW001P BAW M12MI-UAC20B-S04G 15...30 V DC 250 V AC ([) 1.3 mm 2 kΩ Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±45 μm 500 Hz 0.5 ms –1 μm/K IP 67 CE, cULus Brass, coated PBT 0.2 m PUR cable with M12 connector, 3-pin Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±45 μm 500 Hz 0.5 ms –0.5 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin Wiring diagrams Connector, voltage output Cable, voltage output Connector, current output Cable, current output 664 For more information, visit us online! Inductive Sensors for Analog Distance Measurement Cylinder designs, M12×1 Temperature output M12×1 Flush Voltage, 0...10 V 0.5...2 mm BAW0010 BAW M12ME-UAC20B-S04G 15...30 V DC 250 V AC ([) 1.25 mm 2 kΩ Yes/Yes/Yes Yes –10...+70 °C ±20.0 μm ±45 μm 500 Hz 0.5 ms 0 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin M12×1 Flush Voltage, 0...10 V 0.5...2 mm BAW001L BAW M12MG2-UAC20B-BP03 15...30 V DC 250 V AC ([) 1.25 mm 2 kΩ Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±45 μm 500 Hz 0.5 ms –1 μm/K IP 67 CE, cULus Brass, coated PBT 3 m PUR cable, 3×0.34 mm² M12×1 Flush Current, 0...20 mA 0.5...2 mm BAW0019 BAW M12MG2-IAC20B-BP00,2-GS04 10...30 V DC 250 V AC ([) 1.25 mm M12×1 Flush Current, 0...20 mA 0.5...2 mm BAW001C BAW M12MG2-IAC20B-BP03 10...30 V DC 250 V AC ([) 1.25 mm 500 Ω Yes/Yes/Yes Yes –10...+70 °C ±5.0 μm ±45 μm 500 Hz 0.5 ms –1 μm/K IP 67 CE, cULus Brass, coated PBT 0.2 m PUR cable with M12 connector, 3-pin 500 Ω Yes/Yes/Yes Yes –10...+70 °C ±5.0 μm ±45 μm 500 Hz 0.5 ms –1 μm/K IP 67 CE, cULus Brass, coated PBT 3 m PUR cable, 3×0.34 mm² M12×1 Quasi-flush Voltage, 0...10 V 1...5 mm BAW0011 BAW M12ME-UAD50B-BP01 15...30 V DC 75 V DC 3 mm 2 kΩ Yes/Yes/Yes No 0...+60 °C ±10.0 μm ±160 μm 1 kHz 2 ms –1.5 μm/K IP 67 CE, cULus Brass, coated PA 12 1 m PUR cable, 4×0.25 mm² Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Cylinder designs Block designs Accessories 26 17 30 M12x1 Temperature output Typical The temperature output (not shortcircuit protected) provides a signal representing a precisely measured temperature change. ■ www.balluff.com 665 Inductive Sensors for Analog Distance Measurement Cylinder designs, M12×1 Distance sensors are assigned the linear position sensing and measurement that we have marked in blue. Series Installation type (pay attention to the note in the Basic Information chapter) Output signal Linear range sl Ordering code Part name Supply voltage UB Rated insulation voltage Ui (protection class) Effective distance se Load resistance RL min. Load resistance RL max. Polarity reversal protected/transposition protected/short-circuit protected Adjustment display (LED) Ambient temperature Ta Repeat accuracy RBWN Non-linearity max. Limit frequency (–3 dB) Response time Temperature coefficient, typically in range from +10...+50 °C Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M12×1 Not flush Voltage, 0...10 V 1...4 mm BAW0014 BAW M12MF2-UAC40F-BP00,2-GS04 15...30 V DC 250 V AC ([) 2.5 mm 2 kΩ M12×1 Not flush Voltage, 0...10 V 1...4 mm BAW000Z BAW M12MD-UAC40F-S04G 15...30 V DC 250 V AC ([) Yes/Yes/Yes Yes –10...+70 °C ±10.0 μm ±90 μm 500 Hz 1 ms 0 μm/K IP 67 CE, cULus Brass, coated PBT 0.2 m PUR cable with M12 connector, 3-pin Yes/Yes/Yes Yes –10...+70 °C ±10.0 μm ±90 μm 500 Hz 1 ms –2 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin 2 kΩ M12×1 Not flush Voltage, 0...10 V 1...4 mm BAW0017 BAW M12MF2-UAC40F-BP03 15...30 V DC 250 V AC ([) 2.5 mm 2 kΩ Yes/Yes/Yes Yes –10...+70 °C ±10.0 μm ±90 μm 500 Hz 1 ms 0 μm/K IP 67 CE, cULus Brass, coated PBT 3 m PUR cable, 3×0.34 mm² Wiring diagrams Connector, voltage output Cable, voltage output M12x1 Connector, current output Cable, current output 666 For more information, visit us online! Inductive Sensors for Analog Distance Measurement Cylinder designs, M12×1, M18×1 Temperature output M12×1 Not flush Current, 4...20 mA 1...4 mm BAW003N BAW M12MH1-ICC40F-S04G 10...30 V DC 250 V AC ([) 2.5 mm M18×1 Flush Voltage, 0...10 V 1...5 mm BAW001Z BAW M18ME-UAC50B-BP00,2-GS04 15...30 V DC 75 V DC 2 kΩ 500 ohms Yes/Yes/Yes Yes –10...+70 °C Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±120 μm 500 Hz 1 ms –1 μm/K IP 67 CE, cULus Brass, coated PBT 0.2 m PUR cable with M12 connector, 3-pin ±120 μm 500 Hz 0.5 ms IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin M18×1 Flush Voltage, 0...10 V 1...5 mm BAW002K BAW M18MI-UAC50B-S04G 15...30 V DC 250 V AC ([) 3 mm 2 kΩ M18×1 Flush Voltage, 0...10 V 1...5 mm BAW0026 BAW M18ME-UAE50B-S04G-K 21.6...26.4 V DC 75 V DC 3 mm 2 kΩ M18×1 Flush Voltage, 0...10 V 1...5 mm BAW0025 BAW M18ME-UAC50B-S04G 15...30 V DC 75 V DC 3 mm 2 kΩ Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±120 μm 500 Hz 1 ms –2 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±120 μm 500 Hz 1 ms –1 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 4-pin Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±120 μm 500 Hz 1 ms –2 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Cylinder designs Block designs Accessories M18x1 30 24 65 49.5 17 36 5 M12x1 LED 24 41.5 LED Temperature output M12x1 Typical Ø14.5 The temperature output (not shortcircuit protected) provides a signal representing a precisely measured temperature change. ■ www.balluff.com 667 Inductive Sensors for Analog Distance Measurement Cylinder designs, M18×1 Distance sensors are assigned the linear position sensing and measurement that we have marked in blue. Series Installation type (pay attention to the note in the Basic Information chapter) Output signal Linear range sl Ordering code Part name Supply voltage UB Rated insulation voltage Ui (protection class) Effective distance se Load resistance RL min. Load resistance RL max. Polarity reversal protected/transposition protected/short-circuit protected Adjustment display (LED) Ambient temperature Ta Repeat accuracy RBWN Non-linearity max. Limit frequency (–3 dB) Response time Temperature coefficient, typically in range from +10...+50 °C Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection With teach-in, 3 switching points With Teach-in M18×1 Flush Voltage, 0...10 V 1...5 mm BAW002M BAW M18MI2-UAC50B-BP05-002 15...30 V DC 250 V AC ([) 3 mm 2 kΩ M18×1 Flush Voltage, 0...10 V 1...5 mm BAW002U BAW M18MM-UAZ50B-BP05-505 21.6...26.4 V DC 250 V AC ([) 3 mm 2 kΩ M18×1 Flush Voltage, 0...10 V 1...5 mm BAW0022 BAW M18ME-UAC50B-BP03 15...30 V DC 75 V DC 3 mm 2 kΩ Yes/No/Yes Yes –10...+70 °C ±8.0 μm ±120 μm 500 Hz 1 ms –1.5 μm/K IP 67 CE, cULus Brass, coated PBT 5 m PUR cable, 7×0.25 mm² Yes/No/Yes No –10...+70 °C ±8.0 μm ±120 μm 500 Hz 1 ms 0 μm/K IP 67 CE, cULus Brass, coated PBT 5 m PUR cable, 7×0.25 mm² Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±120 μm 500 Hz 1 ms –1 μm/K IP 67 CE, cULus Brass, coated PBT 5 m PUR cable, 3×0.34 mm² Wiring diagrams Connector, voltage output Cable, voltage output Connector, current output Cable, current output 668 For more information, visit us online! Inductive Sensors for Analog Distance Measurement Cylinder designs, M18×1 M18×1 Flush 1...5 mm BAW002F BAW M18MI-BLC50B-S04G 18...30 V DC 250 V AC ([) 3 mm M18×1 Flush Current, 0...20 mA 1...5 mm BAW002H BAW M18MI-IAC50B-S04G 10...30 V DC 250 V AC ([) 3 mm M18×1 Flush Current, 4...20 mA 1...5 mm BAW002J BAW M18MI-ICC50B-S04G 10...30 V DC 250 V AC ([) 3 mm M18×1 Flush Current, 4...20 mA 1...5 mm BAW001U BAW M18ME-ICC50B-S04G 10...30 V DC 75 V DC 3 mm M18×1 Flush Current, 4...20 mA 1...5 mm BAW001T BAW M18ME-ICC50B-BP03 15...30 V DC 75 V DC 3 mm Yes/Yes/Yes Yes –10...+70 °C ±10.0 μm ±120 μm 500 Hz 2 ms –2 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin 500 Ω Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±120 μm 500 Hz 1 ms –1 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin 500 Ω Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±120 μm 500 Hz 1 ms -5 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin 500 Ω Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±120 μm 500 Hz 1 ms –3 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin 500 Ω Yes/Yes/Yes Yes –10...+70 °C ±8.0 μm ±120 μm 500 Hz 1 ms –3 μm/K IP 67 CE, cULus Brass, coated PBT 3 m PVC cable, 3×0.34 mm² IO-Link, falling with rising proximity ■ www.balluff.com Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Cylinder designs Block designs Accessories 669 Inductive Sensors for Analog Distance Measurement Cylinder designs, M18×1, M30×1.5 Distance sensors are assigned the linear position sensing and measurement that we have marked in blue. Temperature output Series Installation type (pay attention to the note in the Basic Information chapter) Output signal Linear range sl Ordering code Part name Supply voltage UB Rated insulation voltage Ui (protection class) Effective distance se Load resistance RL min. Polarity reversal protected/transposition protected/short-circuit protected Adjustment display (LED) Ambient temperature Ta Repeat accuracy RBWN Non-linearity max. Limit frequency (–3 dB) Response time Temperature coefficient, typically in range from +10...+50 °C Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M18×1 Not flush Voltage, 0...10 V 2...8 mm BAW002C BAW M18MG-UAC80F-S04G 15...30 V DC 250 V AC ([) 5 mm 2 kΩ Yes/Yes/Yes Yes –10...+70 °C ±12.0 μm ±180 μm 500 Hz 1.5 ms –3 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin M18×1 Not flush Voltage, 0...10 V 4...16 mm BAW0029 BAW M18MG-UAC16F-S04G-K 15...30 V DC 250 V AC ([) 10 mm 2 kΩ Yes/Yes/Yes Yes +10...+60°C* ±200.0 μm ±360 μm 500 Hz 3 ms 8 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin M30×1.5 Flush Voltage, 0...10 V 2...10 mm BAW002W BAW M30ME-UAC10B-S04G 15...30 V DC 250 V AC ([) 6 mm 2 kΩ Yes/Yes/Yes Yes –10...+70 °C ±10.0 μm ±240 μm 500 Hz 1.5 ms 1.5 μm/K IP 67 per BWN Pr. 14 CE, cULus Brass, coated PBT M12 connector, 3-pin * The function is guaranteed over a range of –10...+70 °C M30x1.5 30 44.5 36 Wiring diagram Connector, voltage output LED M12x1 Temperature output Typical The temperature output (not shortcircuit protected) provides a signal representing a precisely measured temperature change. 670 For more information, visit us online! Inductive Sensors for Analog Distance Measurement Cylinder designs, M30×1.5, PG36 M30×1.5 Not flush Voltage, 0...10 V 3...15 mm BAW002Y BAW M30ME-UAC15F-S04G 15...30 V DC 250 V AC ([) 9 mm 2 kΩ Yes/Yes/Yes Yes –10...+70 °C ±12.0 μm ±360 μm 350 Hz 3 ms 1.5 μm/K IP 67 CE, cULus Brass, coated PBT M12 connector, 3-pin PG36 Flush Voltage, 0...10 V 0...20 mm BAW003M BAW MKZ-471.19-S4 20...30 V DC 75 V DC 10 mm 10 kΩ Yes/Yes/Yes Yes –10...+70 °C ±5.0 μm ±600 μm 20 Hz –1 μm/K IP 67 CE Brass, coated PBT M12 connector, 3-pin Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Cylinder designs Block designs Accessories M12x1 ■ www.balluff.com 671 Inductive Sensors for Analog Distance Measurement Cylinder design, high-pressure resistant M12×1 ■ Analog for control of valves or soft stop ■ Measurements of valves and cylinders possible ■ Ceramic on medium side – robust ■ Oil pressure up to 500 bar Application areas ■ Control of valves ■ Parked position of cranes ■ Final position of installation supports ■ Service measurements of valves ■ Position monitoring in mobile hydraulic systems ■ Control of agricultural technology Distance sensors are assigned the linear position sensing and measurement that we have marked in blue. Series Installation (pay attention to the note in the Basic Information chapter) Output signal Linear range sl Ordering code Part name Supply voltage UB Rated insulation voltage Ui (protection class) Effective distance se Load resistance RL min. Polarity reversal protected/transposition protected/short-circuit protected Adjustment display (LED) Ambient temperature Ta Repeat accuracy RBWN Non-linearity max. Limit frequency (–3 dB) Response time Temperature coefficient, typically in range from +10...+50 °C Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection M12×1 Flush Voltage, 0...10 V 0.5...2 mm BAW0040 BAW Z08EO-UAD20B-S04G-H11 15...30 V DC 75 V DC 1.25 mm 2 kΩ Yes/Yes/Yes No –25...+85 °C ±8.0 μm ±45 μm 1 kHz 1 ms –1 μm/K IP 68 CE, cULus Stainless steel Ceramic M12 connector, 3-pin - Wiring diagram Connector, voltage output 672 500 bar For more information, visit us online! Inductive Sensors for Analog Distance Measurement Block design, 10×30×6 mm Distance sensors are assigned the linear position sensing and measurement that we have marked in blue. Series Installation (pay attention to the note in the Basic Information chapter) Output signal Linear range sl Ordering code Part name Supply voltage UB Rated insulation voltage Ui (protection class) Effective distance se Load resistance RL min. Polarity reversal protected/transposition protected/short-circuit protected Adjustment display (LED) Ambient temperature Ta Repeat accuracy RBWN Non-linearity max. Limit frequency (–3 dB) Response time Temperature coefficient, typically in range from +10...+50 °C Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 10×30×6 mm R03 Flush Voltage, 0...10 V 1...4 mm BAW0030 BAW R03KC-UAE40B-BP00,3-GS26 21.6...26.4 V DC 75 V DC 2.5 mm 5 kΩ No/No/No Yes 0...+70 °C ±35.0 μm ±150 μm 1 kHz 0.5 ms 4.7 μm/K IP 67 CE, cULus No/No/No PA6-FG30 0.3 m PUR cable with M5 connector, 3-pin 10×30×6 mm R03 Flush Voltage, 0...10 V 1...4 mm BAW0031 BAW R03KC-UAE40B-BP00,3-GS49 21.6...26.4 V DC 75 V DC Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire 5 kΩ No/No/No Yes 0...+70 °C ±35.0 μm ±150 μm 1 kHz 0.5 ms 4.7 μm/K IP 67 CE, cULus PA6-FG30 PA6-FG30 0.3 m PUR cable with M8 connector, 3-pin AC 2-wire Special properties Analog distance measurement Cylinder designs Block designs Accessories Installation note for BAW R03... Material Steel Brass Aluminum Stainless steel Installation dimensions x 0 mm 5 mm 5 mm 5 mm Wiring diagram Connector, voltage output ■ www.balluff.com 673 Inductive Sensors for Analog Distance Measurement Block designs, 10×30×6 mm, 20×30×8 mm Distance sensors are assigned the linear position sensing and measurement that we have marked in blue. Series Installation type (pay attention to the note in the Basic Information chapter) Output signal Linear range sl Ordering code Part name Supply voltage UB Rated insulation voltage Ui (protection class) Effective distance se Load resistance RL min. Polarity reversal protected/transposition protected/short-circuit protected Adjustment display (LED) Ambient temperature Ta Repeat accuracy RBWN Non-linearity max. Limit frequency (–3 dB) Response time Temperature coefficient, typically in range from +10...+50 °C Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 10×30×6 mm R03 Flush Voltage, 0...10 V 1...4 mm BAW0032 BAW R03KC-UAE40B-BP03 21.6...26.4 V DC 75 V DC 2.5 mm 5 kΩ No/No/No Yes 0...+70 °C ±35.0 μm ±150 μm 1 kHz 0.5 ms 5 μm/K IP 67 CE, cULus PA6-FG30 PA6-FG30 3 m PUR cable, 3×0.14 mm² 20×30×8 mm R06 Flush Voltage, 0...10 V 0.5...2 mm BAW0034 BAW R06AC-UAF20B-S49G 21.6...26.4 V DC 75 V DC 1.3 mm 5 kΩ No/No/No No –10...+70 °C ±12.0 μm ±45 μm 1 kHz 0.5 ms 0.5 μm/K IP 67 CE Anodized aluminum PBT M8 connector, 3-pin * The function is guaranteed over a range of –10...+70 °C Wiring diagrams Connector, voltage output Cable, voltage output Connector, current output Cable, current output 674 For more information, visit us online! Inductive Sensors for Analog Distance Measurement Block designs 20×30×8 mm, 14×38.5×17 mm 45677_00 Temperature output Temperature output 14×38.5×17 mm Z01 14×38.5×17 mm Z01 14×38.5×17 mm Z05 Voltage, 0...10 V 1...5 mm BAW003E BAW Z01AC-UAD50B-DP03-K 15...30 V DC 75 V DC 3 mm 2 kΩ Yes/No/Yes No –10...+60 °C ±10.0 μm ±120 μm 1 kHz 1 ms –3 μm/K IP 67 CE, cULus Anodized aluminum PA 12 3 m PUR cable, 4×0.14 mm² IO-Link, falling with rising proximity 1...5 mm BAW003A BAW Z01AC-BLD50B-DP03 18...30 V DC 75 V DC 3 mm IO-Link, falling with rising proximity 1...5 mm BAW003W BAW Z05AC-BLD50B-BP00,75-GS04 18...30 V DC 75 V DC 3 mm Yes/Yes/Yes Yes/Yes/Yes –10...+60 °C ±10.0 μm ±150 μm 200 Hz 5 ms –3 μm/K IP 67 CE, cULus Anodized aluminum LCP 3 m PUR cable, 4×0.14 mm² –10...+60 °C ±10.0 μm ±150 μm 200 Hz 5 ms –3 μm/K IP 67 CE, cULus Anodized aluminum LCP 0.75 m PUR cable with M12 connector, 3-pin 14 DC 2-wire AC/DC 2-wire Special properties Analog distance measurement Cylinder designs Block designs Accessories 13 4 4 38.5 30.5 18.5 38.5 30.5 1.5 4 4 30 22 30 22 22 4.8 4.8 2 13.5 2 8.5 Temperature output Typical 49 17 Typical r Temperature output 4.8 20° 20° 13.5 DC 3-/4-wire AC 2-wire 13 13 18.5 4 38.5 30.5 1.5 4 8.5 Global DC 3-wire 14 14 30 2 Inductive sensors 17 20×30×8 mm R06 Flush Voltage, 0...10 V 0.5...2 mm BAW0033 BAW R06AC-UAF20B-EP03 21.6...26.4 V DC 75 V DC 1.25 mm 5 kΩ No/No/No No +10...+60°C* ±12.0 μm ±45 μm 1 kHz 0.5 ms 0.5 μm/K IP 67 CE Anodized aluminum PBT 3 m PUR cable, 3×0.14 mm² M12x1 The temperature output (not shortcircuit protected) provides a signal representing a precisely measured temperature change. ■ www.balluff.com The temperature output (not shortcircuit protected) provides a signal representing a precisely measured temperature change. 675 Inductive Sensors for Analog Distance Measurement Block designs, 80×80×40 mm Distance sensors are assigned the linear position sensing and measurement that we have marked in blue. Series Installation type (pay attention to the note in the Basic Information chapter) Output signal Linear range sl Ordering code Part name Supply voltage UB Rated insulation voltage Ui Effective distance se Load resistance RL min. Polarity reversal protected/transposition protected/short-circuit protected Adjustment display (LED) Ambient temperature Ta Repeat accuracy RBWN Non-linearity max. Limit frequency (–3 dB) Temperature coefficient, typically in range from +10...+50 °C Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 80×80×40 mm Maxisensor Not flush Voltage, 0...10 V 0...50 mm BAW003K BAW MKK-050.19-S4 20...30 V DC 75 V DC 25 mm 10 kΩ Yes/Yes/Yes No –10...+70 °C ±12.0 μm ±1500 μm 15 Hz 15 μm/K IP 67 CE PBT PBT M12 connector, 3-pin Wiring diagram Connector, voltage output 676 For more information, visit us online! Inductive Sensors for Analog Distance Measurement Block designs, 80×45×20 mm Distance sensors are assigned the linear position sensing and measurement that we have marked in blue. Series Installation type (pay attention to the note in the Basic Information chapter) Output signal Linear range sl Ordering code Part name Supply voltage UB Rated insulation voltage Ui Effective distance se Load resistance RL min. Polarity reversal protected/transposition protected/short-circuit protected Adjustment display (LED) Ambient temperature Ta Repeat accuracy RBWN Non-linearity max. Response time Temperature coefficient, typically in range from +10...+50 °C Degree of protection as per IEC 60529 Approvals Material Housing Sensing surface Connection 80×45×20 mm analog ring sensor Inductive sensors Voltage, 0...10 V 0...60 mm BAW003L BAW MKV-020.19-S4 15...30 V DC 75 V DC 30 mm 2 kΩ Yes/No/Yes Yes –10...+70 °C ±200 μm ±1500 μm 1 ms 100 μm/K IP 67 CE PBT PBT M12 connector, 3-pin Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Cylinder designs Block designs Accessories Wiring diagram Connector, voltage output Ø4 Testing cone for determining insertion depth (measuring range and linearization) Ø18 Compact analog- ring sensor with 20 mm opening. Various metallic objects or insertion depths result in measured value changes. Applications include thickness measurement of various screws, rods or wires, distance measurement on machines by inserting conical objects in the measuring area of the sensor. Installation conditions Hole > Ø 35 mm Minimum separation 50 mm No mutual interference for front-mounting of two sensors. ■ www.balluff.com No mutual interference for parallel mounting of two sensors. When stacking multiple sensors, the separation must be at least 50 mm. The opening should be at least Ø 35 mm for flat installation on metal surfaces. 677 Inductive Sensors Accessories for inductive sensors We offer special accessories for our inductive sensors. With products optimally suited to each other. Alongside switching devices, there are also assembly aids and protective equipment for the most varied inductive sensors. 678 For more information, visit us online! Accessories for Inductive Sensors Contents Accessories for inductive sensors Pulse stretching Function diagnostics unit Sensor tester, testing and setting device Analog switching devices Assembly aids for Uni and Unicompact sensors Protective coverings for Unicompact sensors Protective nuts Positive stop Tube switch Contact protectors Clamping holder overview 680 681 682 684 686 688 690 692 694 696 698 Basic information and definitions can be found on page 884. ■ www.balluff.com 679 Accessories for Inductive Sensors Pulse stretching Detecting fast motion Rapid motions on machines mean that the sensors are only actuated for a short time. Therefore, the sensor pulse can be too short to guarantee a secure evaluation. Due to its cycle time, the controller does not detect the output signal, with the consequence that important information in the controller sequence is lost. This can pose a risk to your machine! The solution is the Balluff pulse extender BES 516-IV 2. For controlling this device, the rising or falling edge of the sensor output signal is sufficient to generate a pulse that your controller can recognize. The length is adjustable from 2 ms to 1 sec. Small and space-saving, the device can be snapped onto a rail in accordance with EN 50022-35. Description Use Ordering code Part number Output (display by LEDs) Adjustable pulse stretching Set value Input 7/8 Input 5/6 Repeatability Input Min. input pulse length Supply voltage US Residual ripple No-load current Output current Permissible load capacity Ambient temperature Ta Housing attachment Max. conductor cross-section Polarity reversal protected Short-circuit protected Degree of protection as per IEC 60529 Output 3 4 Input 7 8 5 6 1 2 Falling edge Rising edge Low pulse High pulse 680 Pulse stretching Ensures secure output signals from inductive, capacitive or optoelectronic sensors to the controller BAE0073 BES 516-IV 2 Positive-switching (PNP), complementary 2 ms...1 s 200 ms (+50 ms) Referenced to the respective edge of the input signal Referenced to the pulse end of the input signal < 10 % 1 PNP or 1 NPN - NO or NC 1.5 ms 10...30 V DC (input voltage = output voltage) ≤ 15 % Approx. 20 mA ≤ 130 mA ≤ 0.5 μF/24 V 0...60 °C DIN rail EN 50022-35 2×2.5 mm² Yes Yes Housing IP 40/terminals IP 20 Low-pulse, extended High-pulse, extended Falling edge Rising edge Low pulse High pulse –US +US Output signal is triggered by rising edge Output signal is triggered by rising edge PNP-NC/NPN-NO short damped PNP-NO/NPN-NC short undamped PNP-NC/NPN-NO short damped PNP-NO/NPN-NC short undamped For more information, visit us online! Diagnostics Accessories for Inductive Sensors Function diagnostics unit The BES 113-FD-1 function diagnostics unit monitors a proximity switch with dynamic function diagnostics and its cable. A logic circuit polls the sensor signals for the presence of test pulses and also monitors for proper function of the device. For the machine control system, it emits a high level signal on the "Status/Output" message output when there is no fault and a low signal when faults are present. LEDs indicate the switching state of the sensor. Faults that occur are stored by the device. They must be reset using a reset function (low signal on 5). If the BES 113-FD-1 is used as a single unit, terminals VI (3 and 4) must be bridged together. Description Use Ordering code Part number Supply voltage US No-load current Low Output voltage U0 High (referenced to 0 V) Output current max. Ambient temperature Ta LED 1 green LED 2 yellow Degree of protection as per IEC 60529 Housing attachment Conductor cross-section max. Function diagnostics unit with electronic output Monitoring the dynamic function diagnostics and connection cable for function diagnostics sensors BES 113-356-SA 6-..., BES 113-3019-SA 1-.. BAE006W BES 113-FD-1 20...30 V DC Approx. 20 mA 0...(0.1×US) when the sensor or diagnostics unit has a fault) (0.5×US)...US when functioning properly 50 mA 0...+60 °C "Ready/Error" – when functioning properly, the LED is on bright. When there is a fault, the LED illuminates dimly. "Sensor Output State" indicates the switching state of the sensor. Housing IP 40, terminals IP 20 Rail mount according to DIN EN 50022-35 2×2.5 mm² Function principle OK/Fault message Reset Dynamic Processing Amplifier Comparator Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Pulse Extension Function Diagnostics Unit Sensor tester, testing and setting device Analog switching device Assembly aids for Uni and Unicompact sensors Protective covering for Unicompact sensors Protective nuts Positive stop Tube switch Contact protector Clamping holder overview Common message output Cascading When cascading several BES 113-FD-1 (series connection), the output (2) must be connected to the input (3) of the downstream device. The jumper between VI is not needed except for the first device. When there is a malfunction, the message appears on the last device. The defective sensor is indicated by the first weakly illuminated LED in the cascade. Small and space-saving, the BES 113-FD-1 can be mounted in a DIN rail according to DIN EN 50022-35. ■ www.balluff.com Bridge 681 Accessories for Inductive Sensors Sensor tester, testing and setting device Tester BES 516-7 The sensor tester BES 516-7, in the Balluff design, is flat, handy, and visually appealing. The testing device is a simple manual testing device for PNP/NPN, normally open and normally closed sensors. Benefits ■ Integrated steel measuring plate for testing sensors ■ Automatic shut-off after 30 s of non-use ■ Power provided by a 9V battery ■ Visual and acoustic signal Testing and setting device BES 516-4 With this programming device, the following testing and setting functions can be carried out on the sensors: ■ Programming the switching distance of analog sensors. ■ Sensors with teachable switching points can also be programmed. ■ Testing 3-wire sensors. ■ Testing 2-wire sensors. Note Tester is not suitable for 2-wire and Desina sensors 682 For more information, visit us online! Accessories for Inductive Sensors Sensor tester, testing and setting device Description Use Sensor tester For DC PNP/NPN 3-wire sensors Ordering code Part number Output voltage LED indicators Battery type Sensor connection Degree of protection as per IEC 60529 Housing material BAE002C BES 516-7 18 V DC 1 operating indicator 1× 9 V battery 3 spring-loaded terminals IP 40 Plastic Acoustic and visual signal, built-in steel measuring plate Testing and setting device For DC PNP/NPN 2/3-wire sensors and analog sensors BAE0029 BES 516-4 18 V DC 3 function indicators, 1 operating indicator 2× 9 V batteries 7 spring-loaded terminals IP 40 Plastic Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Pulse Extension Function Diagnostics Unit Sensor tester, testing and setting device Analog switching device Assembly aids for Uni and Unicompact sensors Protective covering for Unicompact sensors Protective nuts Positive stop Tube switch Contact protector Clamping holder overview ■ www.balluff.com 683 Accessories for Inductive Sensors Analog switching device for onsite assembly for inductive distance sensors BAW Analog switching device for onsite assembly This switching device allows you to easily program sensors which have an analog output signal, such as the BOD family, with three switching thresholds, onsite. In this, the sensor connected to the switching device is brought into the desired switching distance from the object. Then connecting the control line to the (+) side of the supply voltage enables a "Teach-in" mode; in other words, the set distance is assigned to the signal level present and these values are stored in the evaluation device. This procedure is supported with LEDs. During operation, these LEDs are available as switching state indicators. For sensors with a temperature output, the analog temperature signal is made available in unchanged form on the device output. Connection example Analog sensors e.g. BOD... Analog switching amplifier BES 516-615-PS-1-PU-05 Wiring diagrams PNP analog and PNP normally open PNP analog and NPN normally open Size Use PNP analog and Ordering code Part number PNP NO PNP analog and Ordering code Part number NPN NO Rated operating voltage Ue Supply voltage US Residual ripple Rated insulation voltage Ui Rated operating current Ie per output No-load supply current I0 max. Residual current Ir Polarity reversal protected Short-circuit protected Ambient temperature Ta Switching frequency f Utilization category Function indicator for each output Analog input Input voltage Uin Input impedance Switching outputs Freely programmable switching outputs Hysteresis H Temperature drift Degree of protection as per IEC 60529 Housing material Connection Input Output M18×1 For analog sensors BAE0070 BES 516-615-PS-1-PU-05 BAE006Z BES 516-615-NS-1-PU-05 15...30 V DC 15...30 V DC ≤ 15% of Ue 75 V DC 100 mA ≤ 20 mA ≤ 10 μA Only against ±-reversal Yes –10...+70 °C 2 kHz DC 13 Yes 0...10 V (implemented to output A) 4.2 kΩ 3 500 mV ≤ 2 % of Uin max. IP 67 CuZn coated M12 connector, 5-pin 5 m PUR cable, 7×0.25 mm² Approach curve 684 For more information, visit us online! Accessories for Inductive Sensors Analog switching device for control cabinet installation for inductive distance sensors BAW Analog switching device for control cabinet installation The analog switching device is operated with 24 V and provides the supply voltage for analog sensors such as the Balluff BOD. The device is controlled directly by the current signals (2) or voltage signals (4). From this signal, separate push-pull final stages (PNP/ NPN) are used to create three switch points (A1...A3) which can be set independently using the potentiometer (on the front side). The respective switching state is indicated by LEDs. The operating direction (rising/falling) can be set using DIP switches inside the unit. This circuit allows width-adjustable "ranges" to be defined (cascading). The voltage signal (4) proportional to the current can be used to drive additional analog switching devices (expansion for additional switching points). The signal inputs on the analog switching device are protected against polarity reversal and the push-pull output stages against short circuit (internal fuses). Description Use Ordering code Part number Supply voltage US Residual ripple Input circuit Current input, terminal 2/3 Input resistance Voltage input terminal 4 Input resistance Setting range Hysteresis (referenced to set value) Output current circuit Voltage drop PNP-transistor Voltage drop NPN-transistor Operating current per push-pull stage Housing material Housing dimensions Connection type max. conductor cross-section Housing attachment Ambient temperature Ta Degree of protection as per IEC 60529 Analog switching amplifier for analog current and voltage signals Switching point setting on analog sensors, e.g. BOD, BAW BAE006Y BES 516-611-A-1 24 V DC ±10 % ≤ 10 % Global DC 3-wire DC 3-/4-wire DC 2-wire 0...10 mA/0...20 mA 308 Ω/154 Ω 0...10 V 13 kΩ 3...100 % 3% AC/DC 2-wire AC 2-wire Special properties Analog distance measurement ≤ 3.5 V ≤ 2.5 V ≤ 200 mA PC (glass fiber reinforced) 74×45×120 mm Screw terminals Up to 2.5 mm² Snap-mount on DIN rail 0...+50 °C Terminals IP 20, housing IP 40 Power supply Push-pull outputs LED Inductive sensors Potentiometer Accessories Pulse Extension Function Diagnostics Unit Sensor tester, testing and setting device Analog switching device Assembly aids for Uni and Unicompact sensors Protective covering for Unicompact sensors Protective nuts Positive stop Tube switch Contact protector Clamping holder overview Analog sensor Connections ■ www.balluff.com 685 Accessories for Inductive Sensors Assembly aids for Unicompact sensors Description Use Ordering code Part number Material Unicompact mounting bracket for BES Q40KFU-... Unicompact sensors (40×40 mm) BAM00JW BES Q40-HW-1 Anodized aluminum Unicompact mounting base for BES Q40KFU-... Unicompact sensors (40×40 mm) BAM00JY BES Q40-HW-2 Anodized aluminum Unicompact mounting base for BES Q40KFU-... Unicompact sensors (40×40 mm) BAM00JZ BES Q40-HW-3 Anodized aluminum Please note permissible installation options! 3 different mounting options 686 For more information, visit us online! Accessories for Inductive Sensors Assembly aids for Unicompact sensors Description Use Ordering code Part number Material Unicompact holding system Unicompact sensors for fastening to profile rails (groove width: 8 mm) BAM00JU BES HS-01-P1-C8/Q40 Al anodized, CuZn Unicompact holding system Unicompact sensors for fastening to profile rails (groove width: 16 mm) BAM00JT BES HS-01-P1-C16/Q40 Al anodized, CuZn Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire The fastener set consists of: ■ 1 mounting plate ■ 2 slot nuts ■ 2 cheese head screws M5×10 DIN 912 ■ 2 washers Ø 5.3, DIN 533 ■ 2 cheese head screws M5×40, ISO 4762 AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Pulse Extension Function Diagnostics Unit Sensor tester, testing and setting device Analog switching device Assembly aids for Uni and Unicompact sensors Protective covering for Unicompact sensors Protective nuts Positive stop Tube switch Contact protector Clamping holder overview ■ www.balluff.com 687 Accessories for Inductive Sensors Assembly aid for Uni sensors and Unicompact sensors Description Use Ordering code Part number Material Mounting plate - Unisensor and Unicompact For Unisensor and Unicompact sensors (40×40 mm) Montageplatte B 4 - 2057 Anodized aluminum Uni sensors can be moved on this assembly plate in a wired state up to 30 mm. Loosening the sensor mounting screws (M5×25; included in scope of delivery) allows the sensor to be easily repositioned at the desired location. Tighten screws! 688 For more information, visit us online! Accessories for Inductive Sensors Protective coverings for Unicompact sensors Description Use Ordering code Part number Material Weld protection - Unicompact For BES Q40KFU-... magnetic field resistant Unicompact sensors (40×40 mm) BAM00K0 BES Q40-SH-1 Anodized aluminum Protective cover - Unicompact for BES Q40KFU-... Unicompact sensors (40×40 mm) BAM00K1 BES Q40-SH-2 PA 6 Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement The weld protection consists of a protective cover and a self-adhering PTFE film for protecting the active surface. If the sensor head is replaced, the welding protection must not be removed. ■ www.balluff.com Accessories Pulse Extension Function Diagnostics Unit Sensor tester, testing and setting device Analog switching device Assembly aids for Uni and Unicompact sensors Protective covering for Unicompact sensors Protective nuts Positive stop Tube switch Contact protector Clamping holder overview 689 Accessories for Inductive Sensors Protective nuts Cover nut For M8 sensors BAM009Z BES 08-SM-1 1 mm Cover nut For M8 sensors BAM00A0 BES 08-SM-1F 1 mm Cover nut For M12 sensors BAM00C2 BES 12-SM-2 1 mm Cover nut For M16 sensors BAM00EP BES 16-SM-2 1.5 mm Cover nut For M18 sensors BAM00EZ BES 18-SM-1 1 mm PTFE PTFE POM PTFE PTFE Ø17 M8x1 Ø10 M8x1 Ø10 Ø18.5 10 5 1 1.5 1 9 1 1 5 Ø13 15 Description Use Ordering code Part number Reduction of the rated switching distance Material M18x1 M12x1 Ø16 M16x1 Ø22 Ø20 These protective nuts are screwed onto sensors. They are made of PTFE or POM and are used when there is increased mechanical stress. The protective nuts are also used to protect the sensing surface from weld splatter. They can also be used at high temperatures and are particularly resistant against chemical influences. Material Ambient temperature Ta POM –20...+90 °C PTFE –20...+100 °C Please note! The rated switching distance of sensors is reduced to the wall thickness of the nut when the protective nut is installed. 690 For more information, visit us online! Accessories for Inductive Sensors Protective nuts Cover nut For M18 sensors BAM00F0 BES 18-SM-2 1 mm Cover nut For M18 sensors BAM00H8 BES 22-SM-2 2 mm Cover nut For M30 sensors BAM00HJ BES 30-SM-1 1 mm Cover nut For M30 sensors BAM00HK BES 30-SM-2 2 mm Cover nut For M36 sensors BAM00JL BES 36-SM-2 2 mm POM PTFE POM POM POM Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire 2 1 2 Ø37 15 15 15 M30x1.5 M18x1 Ø18.5 AC/DC 2-wire AC 2-wire 9.5 1 Ø31 Ø30.5 2 Ø23 5 Ø21.5 M22x1,5 Ø28 Ø34 M30x1.5 M36x1,5 Ø35 Ø42 Special properties Analog distance measurement Accessories Pulse Extension Function Diagnostics Unit Sensor tester, testing and setting device Analog switching device Assembly aids for Uni and Unicompact sensors Protective covering for Unicompact sensors Protective nuts Positive stop Tube switch Contact protector Clamping holder overview ■ www.balluff.com 691 Accessories for Inductive Sensors Positive stop Positive stops for sensors with diameters of 4 mm or 8 mm A positive stop that is combined with the corresponding mounting cuff can be added to inductive sensors with housing Ø 4 mm or Ø 8 mm. The desired switching point between the proximity switch and the trigger pin can be set wherever needed. Description Positive stop Use For inductive sensors for mechanical protection BAM009L BES 08-FA-49 Ordering code Part number Ordering code Part number Temperature resistance Spring force Impact force Fmax. (N) Spring deflection Permissible torque Material –25...+100 °C 3N 100 2 mm 15 Nm Stainless steel M8×1 4 Ø5.5 Se ns or Ø 4 m m 13 Positiv e stop 692 2 BES 1 2-FA-7 0 For mo more information, visit us online! Accessories for Inductive Sensors Positive stop, mounting cuff for positive stop Positive stop Positive stop For inductive sensors for mechanical protection BAM009M BES 08-FA-89 For inductive sensors for mechanical protection BAM00AZ BES 12-FA-70 –25...+100 °C 3N 100 2 mm 15 Nm Stainless steel –25...+100 °C 4N 100 32 mm 25 Nm Stainless steel Mounting cuff straight for positive stop For sensors with Ø 4 mm or Ø 8 mm BAM009N BES 08-FA-BS-4.0-G BAM009R BES 08-FA-BS-8.0-G –25...+100 °C Mounting cuff angled for positive stop For sensors with Ø 4 mm or Ø 8 mm BAM009P BES 08-FA-BS-4.0-W BAM009T BES 08-FA-BS-8.0-W –25...+100 °C Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire 15 Nm Anodized Al Special properties 15 Nm Anodized Al Analog distance measurement M8×1 M12×1 Ø5.5 Positive stop Ø 8 mm Positive stop Ø 8 mm 4 4 Ø8 13 ■ www.balluff.com 17 Sensor Ø 4 mm or Ø 8 mm Sensor Ø 4 mm or Ø 8 mm Accessories Pulse Extension Function Diagnostics Unit Sensor tester, testing and setting device Analog switching device Assembly aids for Uni and Unicompact sensors Protective covering for Unicompact sensors Protective nuts Positive stop Tube switch Contact protector Clamping holder overview 693 Accessories for Inductive Sensors Tube switch ■ Mechanical actuation – non-contact switching ■ Protects the sensor from mechanical damage ■ Plug and safe Rapid application – high reliability The set includes a pre-assembled tube switch, which means you only need to set up the sensor. The tube switch also combines the advantages offered by mechanical and inductive switches. Manufactured from stainless steel, it is extremely robust and very reliable, even under difficult conditions. Description Use Ordering code Part number Spring force F (N) Impact force Fmax. (N) Switching operations min. (with Fmax.) Housing material 694 Tube switch For sensors dia. 4 mm for mechanical protection BAM01C0 BAM FS-XE-002-D4-4 3 400 500000 Stainless steel For more information, visit us online! Accessories for Inductive Sensors Tube switch Tube switch For M5 sensors for mechanical protection BAM01AZ BAM FS-XE-001-M5-4 3 400 500000 Stainless steel Tube switch For M5 sensors for mechanical protection BAM019Y BAM FS-XE-003-M5-4 3 400 500000 Stainless steel Tube switch For M8 sensors for mechanical protection BAM019W BAM FS-XE-004-M8-4 4 400 500000 Stainless steel Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Pulse Extension Function Diagnostics Unit Sensor tester, testing and setting device Analog switching device Assembly aids for Uni and Unicompact sensors Protective covering for Unicompact sensors Protective nuts Positive stop Tube switch Contact protector Clamping holder overview ■ www.balluff.com 695 Accessories for Inductive Sensors Contact protector Contact protector for sensors The contact protector absorbs contacts with displacement of up to 15 mm without the sensor being damaged. The object strikes an attached protective cap and then pushes the sensor back. Damage to the sensor or coil is thereby prevented. Description Use Ordering code Part number WAF Ambient temperature Material 696 Contact protector For M8 sensors for mechanical protection BAM015U BESA-08-CM 22 –45...+85 °C Anodized Al, POM For more information, visit us online! Accessories for Inductive Sensors Contact protector Contact protector For M12 sensors for mechanical protection BAM015W BESA-12-CM 29 –45...+85 °C Anodized Al, POM Contact protector For M18 sensors for mechanical protection BAM015Y BESA-18-CM 35 –45...+85 °C Anodized Al, POM Contact protector For M30 sensors for mechanical protection BAM015Z BESA-30-CM 51 –45...+85 °C Anodized Al, POM Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Pulse Extension Function Diagnostics Unit Sensor tester, testing and setting device Analog switching device Assembly aids for Uni and Unicompact sensors Protective covering for Unicompact sensors Protective nuts Positive stop Tube switch Contact protector Clamping holder overview ■ www.balluff.com 697 Accessories for Inductive Sensors Clamping holder for cylindrical sensors 17× Standard 3× Stainless steel 10× PTFE-coated, weld-immune 12× Standard with latch 6× Standard with latch PTFE-coated, weld-immune 6× Stainless steel with latch 6× Stainless steel with latch PTFE-coated, weld-immune 5× For installation in containers 65 Clamping holder variants! Balluff has revolutionized methods for attaching sensors with the new latch clamping principle. The sensor is inserted into the clamps and secured in position by folding over the latch. The latch can secure any sensor in all areas of the automation sector without the use of tools. 698 Stainless Stainless Stainless Steel Steel Steel For more information, visit us online! Accessories for Inductive Sensors Balluff accessories product line Inductive sensors Global DC 3-wire DC 3-/4-wire DC 2-wire AC/DC 2-wire AC 2-wire Special properties Analog distance measurement Accessories Pulse Extension Function Diagnostics Unit Sensor tester, testing and setting device Analog switching device Assembly aids for Uni and Unicompact sensors Protective covering for Unicompact sensors Protective nuts Positive stop Tube switch Contact protector Clamping holder overview More mounting accessories can be found in our "Accessories Line" catalog or online at: www.balluff.com ■ www.balluff.com 699
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2013:02:13 10:53:10+01:00 Modify Date : 2013:03:19 09:08:57+01:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:a4836662-84d5-45d0-bae6-0bce8bfe56bd Document ID : xmp.did:CCFB45CE0671E211A556AB548DD9A126 Original Document ID : adobe:docid:indd:99f87af7-cf95-11de-9caa-ed543c9f8452 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:C38180FDF570E211A556AB548DD9A126 Derived From Document ID : xmp.did:B63CCC0E0D2FE211AB08DC3F9DC1D77F Derived From Original Document ID: adobe:docid:indd:99f87af7-cf95-11de-9caa-ed543c9f8452 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:F79417F692A5E1118C5080806972DEB8, xmp.iid:F89417F692A5E1118C5080806972DEB8, xmp.iid:08FAFE3293A5E1118C5080806972DEB8, xmp.iid:8AEDBE379CA5E1118C5080806972DEB8, xmp.iid:8BEDBE379CA5E1118C5080806972DEB8, xmp.iid:9368993B9CA5E1118C5080806972DEB8, xmp.iid:9A68993B9CA5E1118C5080806972DEB8, xmp.iid:957B9630A3A5E1118C85CF2876C41924, xmp.iid:967B9630A3A5E1118C85CF2876C41924, xmp.iid:977B9630A3A5E1118C85CF2876C41924, xmp.iid:35BDFE2EA6A5E11191FDF4DA1E558EC6, xmp.iid:80FC39FF46AEE111BBDDFBDE527B05B9, xmp.iid:88FC39FF46AEE111BBDDFBDE527B05B9, xmp.iid:E5CFAF6148AEE111BBDDFBDE527B05B9, xmp.iid:D59673B14DAEE111BBDDFBDE527B05B9, xmp.iid:F79C8CC1AAAFE111B25FA151B723BA14, xmp.iid:BD371A11AEAFE111A69EA3086AB2A751, xmp.iid:D9EE2011AEAFE111A69EA3086AB2A751, xmp.iid:5433BBBFB1AFE111A69EA3086AB2A751, xmp.iid:5A93EEB5B7AFE111B25FA151B723BA14, xmp.iid:60304CC7EB24E211A7EFDE274E5E8A8D, xmp.iid:C1F6FF341728E2118A63C059F13F64F0, xmp.iid:35F17DB21A28E2118A63C059F13F64F0, xmp.iid:345A7F182828E2118A63C059F13F64F0, xmp.iid:2D6B0D3F2B28E2118A63C059F13F64F0, xmp.iid:05C352573028E2118A63C059F13F64F0, xmp.iid:06C352573028E2118A63C059F13F64F0, xmp.iid:07C352573028E2118A63C059F13F64F0, xmp.iid:957EE8783A28E2118838E2ACC5F73263, xmp.iid:10762C2CC228E2118524CE544116E1C9, xmp.iid:E02BDB4ED928E2118524CE544116E1C9, xmp.iid:F5E2CAF2E128E2118524CE544116E1C9, xmp.iid:87FA3DE7E928E2118524CE544116E1C9, xmp.iid:88FA3DE7E928E2118524CE544116E1C9, xmp.iid:1C7B3D93EA28E2118524CE544116E1C9, xmp.iid:9F76FC4AFA28E2118BE7F2327761AFF1, xmp.iid:E6A8E556FB28E2118BE7F2327761AFF1, xmp.iid:168EA92B7F29E211A14BF1B89D4E3436, xmp.iid:9C11D0427F29E211A14BF1B89D4E3436, xmp.iid:06F8634B7F29E211A14BF1B89D4E3436, xmp.iid:70C132B17F29E211A14BF1B89D4E3436, xmp.iid:BD74883C622AE211AC67EC4C2814A7ED, xmp.iid:B23CCC0E0D2FE211AB08DC3F9DC1D77F, xmp.iid:B33CCC0E0D2FE211AB08DC3F9DC1D77F, xmp.iid:B43CCC0E0D2FE211AB08DC3F9DC1D77F, xmp.iid:B53CCC0E0D2FE211AB08DC3F9DC1D77F, xmp.iid:B63CCC0E0D2FE211AB08DC3F9DC1D77F, xmp.iid:A3A135740D2FE211AB08DC3F9DC1D77F, xmp.iid:A4A135740D2FE211AB08DC3F9DC1D77F, xmp.iid:A5A135740D2FE211AB08DC3F9DC1D77F, xmp.iid:A6A135740D2FE211AB08DC3F9DC1D77F, xmp.iid:A7A135740D2FE211AB08DC3F9DC1D77F, xmp.iid:A8A135740D2FE211AB08DC3F9DC1D77F, xmp.iid:A9A135740D2FE211AB08DC3F9DC1D77F, xmp.iid:AAA135740D2FE211AB08DC3F9DC1D77F, xmp.iid:3434A5593050E211852FD607AEF03011, xmp.iid:3534A5593050E211852FD607AEF03011, xmp.iid:C38180FDF570E211A556AB548DD9A126, xmp.iid:CCFB45CE0671E211A556AB548DD9A126, xmp.iid:CDFB45CE0671E211A556AB548DD9A126, xmp.iid:CEFB45CE0671E211A556AB548DD9A126, xmp.iid:689197A60A71E211A556AB548DD9A126, xmp.iid:BB7CE3730B71E211A556AB548DD9A126, xmp.iid:FC86B0D80B71E211A556AB548DD9A126, xmp.iid:57BBB3D80B71E211A556AB548DD9A126, xmp.iid:838F1AF80B71E211A556AB548DD9A126, xmp.iid:9F2CFFF90E71E211A556AB548DD9A126, xmp.iid:A02CFFF90E71E211A556AB548DD9A126, xmp.iid:A12CFFF90E71E211A556AB548DD9A126 History When : 2012:05:24 13:24:01+02:00, 2012:05:24 13:24:01+02:00, 2012:05:24 13:25:43+02:00, 2012:05:24 14:30:16+02:00, 2012:05:24 14:30:23+02:00, 2012:05:24 14:30:23+02:00, 2012:05:24 15:00:23+02:00, 2012:05:24 15:20:11+02:00, 2012:05:24 15:22:51+02:00, 2012:05:24 15:22:51+02:00, 2012:05:24 15:41:36+02:00, 2012:06:04 15:12:55+02:00, 2012:06:04 15:12:55+02:00, 2012:06:04 15:22:49+02:00, 2012:06:04 16:00:51+02:00, 2012:06:06 09:39:32+02:00, 2012:06:06 10:03:14+02:00, 2012:06:06 10:03:14+02:00, 2012:06:06 10:29:35+02:00, 2012:06:06 11:12:16+02:00, 2012:11:02 13:49:45+01:00, 2012:11:06 15:03:10+01:00, 2012:11:06 15:03:10+01:00, 2012:11:06 16:39:04+01:00, 2012:11:06 17:01:38+01:00, 2012:11:06 17:38:06+01:00, 2012:11:06 17:38:47+01:00, 2012:11:06 17:53:12+01:00, 2012:11:06 18:50:37+01:00, 2012:11:07 11:02+01:00, 2012:11:07 13:47:37+01:00, 2012:11:07 14:49:28+01:00, 2012:11:07 15:46:24+01:00, 2012:11:07 15:49:07+01:00, 2012:11:07 15:51:13+01:00, 2012:11:07 17:43:44+01:00, 2012:11:07 17:51:13+01:00, 2012:11:08 09:34:54+01:00, 2012:11:08 09:35:33+01:00, 2012:11:08 09:35:47+01:00, 2012:11:08 09:38:38+01:00, 2012:11:09 12:40:18+01:00, 2012:11:15 11:13:10+01:00, 2012:11:15 11:13:10+01:00, 2012:11:15 11:14:59+01:00, 2012:11:15 11:15:18+01:00, 2012:11:15 11:15:18+01:00, 2012:11:15 11:16+01:00, 2012:11:15 11:16:59+01:00, 2012:11:15 11:19:04+01:00, 2012:11:15 11:19:04+01:00, 2012:11:15 11:20:51+01:00, 2012:11:15 11:38:42+01:00, 2012:11:15 11:38:42+01:00, 2012:11:15 11:39:36+01:00, 2012:12:27 15:18:56+01:00, 2012:12:27 15:18:56+01:00, 2013:02:07 10:14:41+01:00, 2013:02:07 10:14:41+01:00, 2013:02:07 10:15:39+01:00, 2013:02:07 10:15:57+01:00, 2013:02:07 10:42:13+01:00, 2013:02:07 10:47:57+01:00, 2013:02:07 10:50:46+01:00, 2013:02:07 10:50:46+01:00, 2013:02:07 10:51:39+01:00, 2013:02:07 11:13:11+01:00, 2013:02:07 11:13:11+01:00, 2013:02:07 11:15:56+01:00 History Software Agent : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata Metadata Date : 2013:03:19 09:08:57+01:00 Creator Tool : Adobe InDesign CS5.5 (7.5.1) Page Image Page Number : 1 Page Image Format : JPEG Page Image Width : 256 Page Image Height : 256 Page Image : (Binary data 7563 bytes, use -b option to extract) Doc Change Count : 1086 Format : application/pdf Title : Object Detection – Sophisticated sensor technology for all areas of automation Edition 1302 Creator : Producer : Acrobat Distiller 10.0.0 (Windows) Trapped : False Page Layout : TwoPageRight Page Count : 295EXIF Metadata provided by EXIF.tools